Introduction
        Browse Repository

        Browse by Type

        Up a level
        Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
        Group by: Authors | Item Type | No Grouping
        Number of items: 341.

        Sabreen, Ramzi Alfarra (2015) Biosorption of Cd (II), Cu (II), Fe (III) And Pb (II) from water system using moringa oleifera leaves. Masters thesis, Universiti Malaysia Pahang.

        Nurul Izwanie, Rasli (2015) Fabrication of chromatographic membrane via surface-grafted membrane for protein separation. Masters thesis, Universiti Malaysia Pahang.

        Egbal Hassan, Altoum Mohammed (2015) Methane production from sewage sludge treatment by ultrasonicated membrane anaerobic system (UMAS). Masters thesis, Universiti Malaysia Pahang.

        Gan, Siew Mei (2015) Azobenzene-liquid crystal composite for fabrication of optical storage devices. Masters thesis, Universiti Malaysia Pahang.

        Sayed Qasim, Alavi (2015) Boundary layer stagnation point flow towards an exponentially stretching/shrinking sheet. Masters thesis, Universiti Malaysia Pahang.

        Norliza, Ishak (2015) Development of multivariate statistical process monitoring using combination MLR-PCA method. Masters thesis, Universiti Malaysia Pahang.

        Md Abdus, Sobahan (2015) Effects of industrial wastewater on water and sediment qualities and effectiveness of bioremediation methods of industrial wastewater treatment, Gebeng, Pahang, Malaysia. PhD thesis, Universiti Malaysia Pahang.

        Hamzeh Taha, Salman Alkasasbeh (2015) Numerical solutions for convective boundary layer flow over a solid sphere of newtonion and non-newtonion fluids. PhD thesis, Universiti Malaysia Pahang.

        Tawfiqullah, Ayoubi (2015) Stochastic modelling of time delay for solvent production by Clostridium Acetobutylicum P262. Masters thesis, Universiti Malaysia Pahang.

        Farah Hanani, Zulkifli (2015) Biomimetic scaffolds based on hydroxyethyl cellulose for skin tissue engineering. PhD thesis, Universiti Malaysia Pahang.

        Fadzil, Mat Yahaya (2015) Effects of by-product materials (POFA and PFA) as partial cement replacement on concretetowards corrosion reisitance. PhD thesis, Universiti Malaysia Pahang.

        K., Palaniselvam (2015) In-vitro biological activities of Au and Ag nanoparticles biosynthesized using commelina nudiflora L. aqueous extract. PhD thesis, Universiti Malaysia Pahang.

        Mupit, Datusahlan (2015) Isolation and identification of lipolytic bacteria from galing river water kuantan to degrade waste cooking oil. Masters thesis, Universiti Malaysia Pahang.

        Kong, Zi Ying (2015) Application of CuFe2O4 for photocatalytic fenton degradation of glycerol. Masters thesis, Universiti Malaysia Pahang.

        Nailah, Sa’adah (2015) Application of enzyme-producing bacteria for municipal solid waste biodegradation. Masters thesis, Universiti Malaysia Pahang.

        Muhammad Remanul, Islam (2015) Preparation and characterization of palm oil based polyalkyd films and composites with multi-walled carbon nanotubes. PhD thesis, Universiti Malaysia Pahang.

        Nurul Khairiyyah, Mohd Zain (2015) Synthesis and characterization of activated carbon from palm kernel shells for electrochemical double layer capacitor. Masters thesis, Universiti Malaysia Pahang.

        Nurul Hidayah, Muhamad @ Ghazali (2015) Development of limestone based catalyst for biodiesel production from waste cooking oil. Masters thesis, Universiti Malaysia Pahang.

        Rossyuhaida, Mohd Zakria (2015) Improved bioethanol production from oil palm trunk sap. Masters thesis, Universiti Malaysia Pahang.

        Gomaa Abdelgawad, Mohammed Ali (2015) Preparation and characterization of manganese-based and carbon-based nanomaterials for supercapasitors application. PhD thesis, Universiti Malaysia Pahang.

        Sayed Javid, Azimi (2015) Structural behaviour of kenaf fiber as part shear reinforcement in oil palm shell reinforced concrete beams. Masters thesis, Universiti Malaysia Pahang.

        Soleh, Ardiansyah (2015) Rule extraction from multi-layer perceptron neural network using decision tree for currency exchange rates forecasting. Masters thesis, Universiti Malaysia Pahang.

        Ahmad Affendi, Hashim (2015) An improved legibility guideline for text in web pages. Masters thesis, Universiti Malaysia Pahang.

        Nur Shafiza Afzan , Sharif (2015) Synthesis and characterization of lead Zirconate Titanate (Pb[Zr0.52Ti0.48]O3) properties via high energy planetary ball milling. PhD thesis, Universiti Malaysia Pahang.

        Md. Nurul Islam, Siddique (2015) Co-digestion of petrochemical wastewater with activated manure in continuous stirred tank reactor for methane production. PhD thesis, Universiti Malaysia Pahang.

        Fazliana, Fauzun (2015) Experimental and statistical analysis for surface modification of steel and cast iron using Nd:yag laser. Masters thesis, Universiti Malaysia Pahang.

        Wen Li, Lim (2015) Single-stage DNA splicing system via Yusof-Goode approach. Masters thesis, Universiti Malaysia Pahang.

        Alaa Mashjel, Ali (2015) Synthesis of novel high performance Polyurethane nanocomposites from castor oil as renewable Polyol : study on mechanical, thermal and barrier properties. PhD thesis, Universiti Malaysia Pahang.

        Mohd. Herzwan , Hamzah (2015) An experimental study on performance of diesel engine operating with waste tire and waste plastic derived fuel. Masters thesis, Universiti Malaysia Pahang.

        Sharifah, Awang (2015) An investigation on leading characteristics of rapidkuantan bus passengers using correspondence analysis. Masters thesis, Universiti Malaysia Pahang.

        Norbaizurah , Rahman (2015) Effects of chemical reagents on the properties of fly ash based geopolymer. Masters thesis, Universiti Malaysia Pahang.

        Ahmad Jahed, Mushtaq (2015) Habits and motives of reading newspaper among students in Al-Beroni Universiti of Afghanistan. Masters thesis, Universiti Malaysia Pahang.

        Yogeswaran , Muthusamy (2015) Machinability of AISI304 stainless steel using Ethylene Glycol nano particles based coolant. Masters thesis, Universiti Malaysia Pahang.

        Mohammad Hassan, Mudaber (2015) Persistency and permanency of two stages splicing languages based on DNA recombination process by using Yusof-Goode (Y-G) approach. Masters thesis, Universiti Malaysia Pahang.

        Saifful Kamaluddin , Muzakir (2015) Structural–electronic properties correlation of CdSe quantum dot solar cell using experimental and theoretical investigations. PhD thesis, Universiti Malaysia Pahang.

        Yusra Yaseen , Lazim (2015) The influence of human resources management practices and governmental support on organizational performance in small manufacturing businesses in Malaysia. PhD thesis, Universiti Malaysia Pahang.

        SITI NUR SAKINAH , JAMALUDIN (2015) A parametric study on design and characteristics of stepwise-built functionally graded Hydroxyapatite/Titanium. PhD thesis, Universiti Malaysia Pahang.

        Mohammad Basir, Bakhtyari (2015) Afghanistan students‟ perceptions of the use of online tools for enhancing learning. Masters thesis, Universiti Malaysia Pahang.

        Rasha, Mohammed Abd (2015) Emulsification and demulsification of water-in-crude oil emulsion via microwave-assisted chemical treatment. PhD thesis, Universiti Malaysia Pahang.

        Akindoyo, John Olabode (2015) Oil palm Empty Fruit Bunch (EFB) fiber reinforced poly(lactic) acid composites : effects of fiber treatment and impact modifier. Masters thesis, Universiti Malaysia Pahang.

        Nugroho , Dewayanto (2015) Utilisation of decanter cake from palm oil milling plant as new substrate for the production of bio-oil through catalytic vacuum pyrolysis. PhD thesis, Universiti Malaysia Pahang.

        Azhar, Fakharuddin (2015) A dye – sensitized solar cell module with enhanced charge collection efficiency. PhD thesis, Universiti Malaysia Pahang.

        Md. Rafiqul, Islam (2015) An expiremental study and modeling on gas metal arc welded lap joint of A7075-T651 aluminium alloy to AZ31B magnesium alloy. Masters thesis, Universiti Malaysia Pahang.

        Mohammad Nasim, Tahsildar (2015) The impact of teaching cohesive devices on l2 students’ listening comprehension test scores and language accuracy in written production. Masters thesis, Universiti Malaysia Pahang.

        Muhammad , Khan (2015) Antioxidant and anti-acetylcholinesterase potential from waste of selected solanaceous plants: isolation and identification of the active compound. PhD thesis, Universiti Malaysia Pahang.

        Muhammad Ridzuan , Kamaruzaman (2015) Chemical Equilibrium and kinetic study of the esterification of acrylic acid with butanol catalysed by sulfonated expanded polystyrene. Masters thesis, Universiti Malaysia Pahang.

        Nurul Shamsinar, Shahirin (2015) Development of multiple interactions mixed matrix membrane chromatography for protein fractionation in chicken egg white. Masters thesis, Universiti Malaysia Pahang.

        Vidyadharan , Baiju (2015) Development of nanocomposite nanowires by electrospinning as a supercapacitor electrode with high energy density, power density and rate capability. PhD thesis, Universiti Malaysia Pahang.

        Nor'Aqilah, Misman (2015) Integration of median filter and oriented field estimation for fingerprint identification system. Masters thesis, Universiti Teknologi Malaysia.

        Dayang Siti Hazimmah, Ali (2015) Investigation on the properties of acrylic emulsion polymer based ordinary portland cement concrete reinforced with hooked steel fiber. PhD thesis, Universiti Malaysia Pahang.

        Irma , Nurfitri (2015) Methyl Ester production using feedstock and catalysts from waste sources. Masters thesis, Universiti Malaysia Pahang.

        Hassan Rahnaward, Ghulami (2015) Partial least squares path modelling of UMP students’ attitudes on statistics achievements. Masters thesis, Universiti Malaysia Pahang.

        Mohd Rizauddin , Deraman (2015) Synthesis and characterization of platinum doped titania and silver doped titania for photo-catalytic degradation of pre-treated palm oil mill effluent. Masters thesis, Universiti Malaysia Pahang.

        Mazza Seddig , Adam Abbakar (2015) Ultrasonicated Membrane Anaerobic System (UMAS) for sewage sludge treatment. PhD thesis, Universiti Malaysia Pahang.

        Bahari, Mohamed (2015) The effects of perceived service quality on patient satisfaction and behavioral compliance at a multi speciality public hospital in state of Pahang. PhD thesis, Universiti Malaysia Pahang.

        Muhammad Adib, Shaharun (2015) Effect of variable helix and pitch tool geometries on process damping performance in endmilling process. Masters thesis, Universiti Malaysia Pahang.

        Mohammed Adam, Kunna Azrag (2015) Kinetic paramaters identification for large-scle metabolic model of escherichia coli. Masters thesis, Universiti Malaysia Pahang.

        Wan Rusyaini, Wan Mohd (2015) Measuring laziness through self-regulation using heart rate variability (HRV) biofeedback. Masters thesis, Universiti Malaysia Pahang.

        Rohayu, Jusoh (2015) Mesostructured silica nanoparticles supported electrosynthesized goethite in cationic surfactant for photodegradation of 2–chlorophenol. PhD thesis, Universiti Malaysia Pahang.

        Jacqueline Isabella , Gisen (2015) Prediction in ungauged estuaries. PhD thesis, Delft University of Technology.

        Nor Alisa, Mohd Damanhuri (2015) The numerical approximation to solutions for the double-slip and double-spin model for the deformation and flow of granular materials. PhD thesis, University of Manchester.

        Nur Atiqah , Ramlan (2015) A study on diesel engine performance using biodiesel from waste cooking oil (WCO). Masters thesis, Universiti Malaysia Pahang.

        Adnan Mohammed, Hussein (2014) Heat transfer enhancement using nanofluids in the automotive cooling system. PhD thesis, Universiti Malaysia Pahang.

        Aqeel Sakhy, Jaber (2014) Hybrid intelligent methods for parameter identification and load frequency control in power system. PhD thesis, Universiti Malaysia Pahang.

        Mohd Fauzi , Mohamad Yusof (2014) The economic analysis framework of potential development solar PV energy in Malaysia. Masters thesis, Universiti Malaysia Pahang.

        Urme , Binte Salam (2014) The effect of taubah and biofeedback based drug addiction intervention program among school students. PhD thesis, Universiti Malaysia Pahang.

        Mahfuzah, Mustafa (2014) Eeg sub-band frequency analysis of spectrogram image for balanced brainwave and iq applications. PhD thesis, Universiti Teknologi Mara.

        Jamal Rizal, Razali (2014) Metafora dalam ucapan presiden UMNO 2000-2010: kuasa patriotisme dan setia kawan. PhD thesis, Universiti Sains Malaysia.

        Mohd Fakhrurrazi, Ishak (2014) Tree water uptake on suction distribution in unsaturated tropical residual soil slope. PhD thesis, Universiti Teknologi Malaysia.

        Mohd Zamri, Ibrahim (2014) A novel lip geometry approach for audio-visual speech recognition. PhD thesis, Loughborough University.

        Norasyidah, Harun (2014) Antioxidant Activities of Extracts from Plants in Minor Uses: Parkia Speciosa, Vitex negundo, and Etlingera elatior. Masters thesis, Universiti Malaysia Pahang.

        Mohammed Amjed, Hossain (2014) Assessment of industrial pollution and water quality index of Tunggak River at Gebeng Pahang, Malaysia. PhD thesis, Universiti Malaysia Pahang.

        Shamini, Gunaseelan (2014) Barrier, thermal and mechanical properties of polyurethane-modified clay nanocomposites for thermal insulation material. Masters thesis, Universiti Malaysia Pahang.

        Muhammed Nafis, Osman Zahid (2014) Computer Numerical controlled (CNC) machine for rapid manufacturing processes. PhD thesis, Loughborough University.

        Abu Hannifa, Abdullah (2014) Effects of the modifier types to thermal, mechanical and barrier properties of polyactic acid/modified nanoclay nanocomposite. Masters thesis, Universiti Malaysia Pahang.

        Siti Hajar Noor, Shaarani (2014) Functional characterization of flower morphogenesis and senescence related genes using virus induced gene silencing technique in petunia hybrida. PhD thesis, Okayama University Japan.

        Ahmad Farimin, Ahmad Osman (2014) Kesan suhu dan agen pengkapsul terhadap ciri-ciri fizikokimia serbuk rosel-nanas (hibiscus sabdariffa-ananas comocus). Masters thesis, Universiti Malaysia Pahang.

        Amiril Sahab, Abdul Sani (2014) Pressure gradient and geometrical variation of the abrasive blocks during the polishing process of ceramic tiles with line contact. Masters thesis, University of Kaiserslautern.

        Nurul Nadrah Aqilah , Tukimat (2014) Reservoir system modelling using nondominated sorting genetic algorithm in the framework of climate change. PhD thesis, Universiti Teknologi Malaysia.

        Norazian, Subari (2014) Development if intelligent classifier and estimator for tualang honey purity. Masters thesis, Universiti Sains Malaysia.

        Selvakumaran, Arokiasamy (2014) Effects of leader-member exchange on employee motivation: a case study in Malaysia and UK. Masters thesis, Universiti Malaysia Pahang.

        Ranitha, Mathialagan (2014) Identification and optimization of lemongrass essential oils extracted by hydrodistillation and microwave assisted hydrodistillation methods. Masters thesis, Universiti Malaysia Pahang.

        Noorhidayah, Md Nazir (2014) Identification of unique DNA sequences in Aquilaria malaccensis and Aquilaria hirta via genomic representational difference anaylsis (RDA). Masters thesis, Universiti Malaysia Pahang.

        Siti Hana, Abu Bakar (2014) Molecular interaction of patchouli extraction process using molecular dynamic simulation approach. PhD thesis, Universiti Malaysia Pahang.

        Mohd Aizudin, Abd Aziz (2014) Development of a continous pneumatic jig for solid waste separation. PhD thesis, Universiti of Notthingham.

        Rozlina, Mohamed (2014) Implications of caching for JXTA peers. PhD thesis, Aston University.

        Noor Nabilah, Sarbini (2014) Optimization of steel fibre reinforced concrete as concrete topping in composite slab construction. PhD thesis, Universiti Teknologi Malaysia.

        Wafaa, Kamil Mahmood (2014) Elucidation of physio-chemical characterization of ultrasonic chemically demulsified crude oil. PhD thesis, Universiti Malaysia Pahang.

        Nur Hidayah, Mat Yasin (2014) Membrane technology in microalgae harvesting for biofuel production. PhD thesis, Universiti Sains Malaysia.

        Nurul Ashikin, Abdul Karim (2014) Antibacterial and antihypertensive properties of crude extract of in vitro callus culture of muskmelon (cucumis melo l.). Masters thesis, Universiti Malaysia Pahang.

        Siti Fiqryyah, Musa (2014) Chemical composition and antibacterial activity of essential oil from cymbopogon citratus and cymbopogon nardus. Masters thesis, Universiti Malaysia Pahang.

        Nur Amalina , Ahmad (2014) Chemical composition, antioxidant and antibacterial activity of essential oil from leaf of syzygium polyanthum (wight) walp. Masters thesis, Universiti Malaysia Pahang.

        Wan Zaiton, Wan Sulaiman (2014) Explosion sensitivity and severity of south east asian coals. Masters thesis, Universiti Teknologi Malaysia .

        Siti Noor Fahimah, Jusoh (2014) Identification of chemical constituents of agarwood (aquilaria malaccencis) oil extracted by supercritical fluid and hydrodistillation method. Masters thesis, Universiti Malaysia Pahang.

        Ashwin Charles, Benedict (2014) Investigating drag reduction using turbolence altering pseudo-surface (TAPS). Masters thesis, Universiti Malaysia Pahang.

        Md. Najmul Kabir Chowdhury, Kabir Chowdhury (2014) Synthesis and characterization of nanoparticle incorporated polymer composite materials. PhD thesis, Universiti Malaysia Pahang.

        Najah, Osman (2014) The effect of online teaching approach in enhancing strategic thinking skills for engineering students. PhD thesis, Universiti Malaysia Pahang.

        Mohd Amirul , Asyraf Ahmad (2014) Chemical equilibrium and kinetic study of the esterification of pure and deluted acrylic acid with 2 ethyl hexanol catalysed by amberlyst 15. Masters thesis, Universiti Malaysia Pahang.

        Mohd Shamil, Shaari (2014) Fatigue life analysis of natural fibres. Masters thesis, Northern Illinois University.

        Liyana, Amer Shah (2014) Microwave assisted enzymatic transesterification of waste cooking oil & rubber seed oil. Masters thesis, Universiti Malaysia Pahang.

        Rosmawati, Naim (2014) Polyvinylidene fluoride and polyetherimide hollow fiber membranes for carbon dioxide stripping in gas-liquid membrane contactor. PhD thesis, Universiti Teknologi Malaysia .

        Abeed Fatima, Mohidin Batcha (2014) Biosynthesis of poly (3-hydroxybutyrate) (PHB) by cupriavidus necator H16 from jatropha oil as carbon source. Masters thesis, Universiti Malaysia Pahang.

        Aznizan, Shaari (2014) Synthesis and characterization of bionanocomposite silver nanoparticles (AgNPs)-chitosan/polylactic acid (PLA) biofilm. Masters thesis, Universiti Malaysia Pahang .

        Syed Farhan, Hasany (2014) Synthesis, characterization and optimization of magnetic nanostructures by sol-gel technique and application in water purification. PhD thesis, Universiti Malaysia Pahang.

        Shuhada , Abdul Muttalib (2014) Bioconversion of isoeugenol to vanillin with different straints of pseudomonas aeruginosa. Masters thesis, Universiti Malaysia Pahang.

        Sembiring, Rahmat Widia (2014) Density subspace clustering: a case study on perception of the required skill. Masters thesis, Universiti Malaysia Pahang.

        Zamzuri, Hamedon (2014) In-situ measurement and formability improvement in stamping of high strength steel and titanium alloy sheets. PhD thesis, Toyohashi University of Technology.

        Mohd Syafiq , Bachok (2014) Malaysia network transit route adviser: hybrid didistra's algorithm. Masters thesis, Multimedia University.

        Azizuddin, Abd Aziz (2014) Air-conditioning system with simultaneous control of sensible and latent heat for building energy conservation in Malaysia. PhD thesis, Kyushu University.

        Asmida, Ideris (2014) Carbon formation inhibition in solid oxide fuel cells (SOFCs) using H2S. PhD thesis, University of Waterloo.

        Jessinta , Sandanasamy (2014) Chemical characterization and biological studies of Neem (Azadirachta Indica) extracts. Masters thesis, Universiti Malaysia Pahang.

        Asiah, Kassim (2014) Differential effects of corrective feedback on the ESL learners' accuracy of linguistic form. PhD thesis, Universiti of Malaya.

        Putri Zulaiha, Razi (2014) Environmental sustainability and engineering performance of OPC-fly ash mortar mixs with different workability. Masters thesis, Universiti of Malaya.

        Daing Mohamad Nafiz, Daing Idris (2014) Fundamental study on bending strength on thin-rimmed helical gears with web arrangements. PhD thesis, Tottori University.

        Sureena, Abdullah (2014) Hydrogen production via simultaneous methane reforming and water splitting processes using membrane reactor. PhD thesis, Newcastle University.

        Zulkifli, Musa (2014) Intelligent monitoring system for the classification of customers using the hybrid face detection. Masters thesis, Universiti Kebangsaan Malaysia.

        Wan Anuar , Wan Hassan (2014) Numerical simulation on the effect of anastomosis and stenosis upon radiocephalic arteriovenous fistula. Masters thesis, Universiti Teknologi Malaysia.

        Nur Iffah , Mohamed Azmi (2014) Optimization of PID parameters for hydraulic positioning system utilizing variable weight Grey-Taguchi and particle swarm optimization. Masters thesis, Universiti Malaysia Pahang.

        Florence Sia, Fui Sze (2014) Optimized feature construction methods for data summarization methods for data summarization of relational data. Masters thesis, Universiti Malaysia Sabah.

        Norhaiza, Nordin (2014) Pembangunan satu sistem bangunan berindustri (IBS) - lantai pasang siap sistem kepingan keluli berprofil papan kering. PhD thesis, Universiti Kebangsaan Malaysia.

        Mohd Helmi, Suid (2014) Pendekatan baharu penapis median pensuisan untuk pengurangan hingar impuls tahap rendah pada imej digital. Masters thesis, Universiti Sains Malaysia.

        Kamrul Fakir, Kamarudin (2014) Pilycoremediation of palm oil mill effluents (POME) using scenedesmus dimorphus and ciilorella vulgaris. Masters thesis, Universiti Kebangsaan Malaysia.

        Dayangku Noorfazidah, Awang Sh'ri (2014) Surface characterization and biocomatibility of nanostructured TiNi alloys processed by high-pressure torsion. PhD thesis, University of Tsukuba.

        Nurul Ain, Mohamed Razali (2014) Synthesis, characterization and catalytic performance of Cu/ZnO/SBA-15 for hydrogen of carbon dioxide to methanol. PhD thesis, Universiti Malaysia Pahang.

        Mohd Hafizi, Zohari (2014) The applications of near infra-red fibre bragg grating sensors for wave propagation based structural health monitoring of thin laminated composite plates. PhD thesis, University of Southern Queensland.

        Zamri, Mohamed (2014) A study of tyre cavity resonance noise mechanism and countermeasures using vibroacoustic analysis. PhD thesis, RMIT University.

        Mohammed , Nasir (2013) Fabrication and characterization of medium density fiber board prepared from enzyme treated fiber and lignin based bio adhesive. PhD thesis, Universiti Malaysia Pahang.

        Erna Wati, Hajar (2013) Identification and characterization of stevia rebaudiana extraction for total phenolic compound using soxhlet extraction and microwave-assisted extraction techniques. Masters thesis, Universiti Malaysia Pahang.

        Muhammad Khairul Anuar , Mohamed (2013) Mathematical modeling for the convection boundary layer flow in a viscous fluid with newtonian heating and convective boundary conditions. Masters thesis, Universiti Malaysia Pahang.

        Faiz, Mohd Turan (2013) A three-stage methodology for design evaluation in product development. PhD thesis, Universiti Tun Hussein Onn.

        Anuj, Kumar (2013) Influence of nanofillers on the properties of urea formaldehyde resin and medium density fiberboard. PhD thesis, Universiti Malaysia Pahang.

        Rosmazi, Rosli (2013) Active force control with iterative learning control algorithm for a vehicle suspension. Masters thesis, Universiti Teknologi Malaysia.

        Lakhveer, Singh (2013) Biohydrogen production from palm oil mill effluent using polyethylene glycol immobilized cells in upflow anaerobic sludge blanket reactor. Masters thesis, Universiti Malaysia Pahang.

        Mohd Sapar, Maziah (2013) Keberkesanan kaedah latihan biofeedback emwave terhadap prestasi membaca murid-murid linus di Sekolah Kebangsaan Jengka Batu 13, Chenor. Masters thesis, Universiti Malaysia Pahang .

        Mohd Zaidi, Sidek (2013) The development of a heat assisted section rolling process for strip. PhD thesis, Imperial College London .

        Mohd Ruzaimi, Mat Rejab (2013) The mechanical properties of novel lightweight structures based on corrugated-cores. PhD thesis, University of Liverpool.

        Nurul Haslin, Adnan (2013) Business Plan for the Production of Fructo-Oligosaccharide. Masters thesis, Universiti Malaysia Pahang.

        Miss Hasimawaty, Mat Kiah (2013) Premixed flame acceleration in straight and bend close pipe. Masters thesis, Universiti Teknologi Malaysia .

        Zulhelmi, Ismail (2013) Study the effect of screw speed and temperature profile on structure, thermal and physical properties of melt blended polyamide 6/MMT nanocomposites. Masters thesis, Universiti Malaysia Pahang.

        Bahrun, Mohd Shakir (2013) Production of Modified Cassava Flour (MOCAF). Masters thesis, Universiti Malaysia Pahang.

        Emine, Seydametova (2013) Production of Pravastatin by Filamentous Fungi Isolated from Soil. PhD thesis, Universiti Malaysia Pahang.

        Zuriana, Sidi Ahmad (2013) Production of Sorbitol from Meranti Wood Sawdust Using Solid State Fermentation (SSF) Process. Masters thesis, Universiti Malaysia Pahang.

        Elrasheed Ismail, Sultan (2013) Quantum Particle Swarm Optimization Technique for Load Balancing in Cloud Computing. PhD thesis, Universiti Malaysia Pahang.

        Khaled Salem, Aljfairi (2013) Ultrasonic membrane anaerobic system for wastewater treatment. Masters thesis, Universiti Malaysia Pahang.

        Azrulrizawati, Abd Hamid (2013) Characterisation and Biological Activities of Tinospora Crispa (Menispermaceae) Extract with Emphasis on Alkaloids. PhD thesis, Universiti Malaysia Pahang.

        Raafat Salih , Hadi (2013) Classification of human parasitic worm using microscopic image processing technique /. Masters thesis, Universiti Malaysia Pahang.

        Wu, Jing (2013) Development of tteachingg performance evaluation tool in higher education using artificial intelligent. Masters thesis, Universiti Malaysia Pahang.

        Wan Sharuzi, Wan Harun (2013) Experimental and numerical studies on superhigh strengthening sintered low alloy steels fabricated by metal injection molding). PhD thesis, Kyushu University.

        Pang, Sook Fun (2013) Identification, Extraction and Microencapsulation of Phenolic Compounds from Orthosiphon Stamineus Leaves. Masters thesis, Universiti Malaysia Pahang.

        Asmadi, Ali @ Mahmud (2013) Synthesis, Characterizationa Performance of Polysulfone/Cellulose Acetate Phthalate/ Polyvinylpyrrolidone (Psf/CAP/PVP) Blend Ultrafiltration Membranes. PhD thesis, Universiti Malaysia Pahang.

        Shahid , Ali (2013) Activated cement clinker catalyst development for biodiesel production. Masters thesis, Universiti Malaysia Pahang.

        Salwani, Mohd Salleh (2013) Computational crashworthy optimization of partially filled aluminium foam for automative side member. PhD thesis, Universiti Putra Malaysia.

        Wu, Lihua (2013) Synthesis of polymer-stabilized metallic nanoparticles and their hydrogenation activity for vegetable oil. Masters thesis, Universiti Malaysia Pahang.

        Zulkifly, Jemaat (2013) Treatment of complex industrial wastewaters containing ammonium and phenolic compounds using granular sludge in continuous airlift reactors. PhD thesis, Universitat Autonoma de Barcelona.

        Nur Zahirah, Mohd Ali (2013) Adaptive Embedded Clonal Evolutionary Programming (AECEP) for optimal Distributed Generation (DG) location and sizing in a distribution system. Masters thesis, Universiti Malaysia Pahang.

        Mohd Rusllim, Mohamed (2013) Experimental characterisation and modeling of a vanadium redox flow battery. PhD thesis, Universiti Malaysia Pahang.

        Ruzlaini, Ghoni (2013) Modeling and implementation of space vector modulation for three-phase direct torque control matrix converter. PhD thesis, Universiti Malaysia Pahang.

        Muhammad Izhar, Ishak (2013) Research on skid control system of small electric vehicle : (the effect of regenerative brake control on in-wheel small electric vehicle with anti-lock brake system). Masters thesis, Tokai University.

        Noraznafulsima, Khamshah (2013) Fuzzy temperature compensation scheme for hot wire mass airflow sensor. Masters thesis, Universiti Malaysia Pahang.

        Zulsyazwan, Ahmad Khushairi (2013) Optimization of Oil Palm Trunk Core Biodelignification Using Pleurotus Ostreatus. Masters thesis, Universiti Malaysia Pahang.

        Amir Izzani, Mohamed (2013) Space charge behavior in polymeric insulating materials under DC stress and pre-breakdown phenomena. PhD thesis, Ehime University JAPAN.

        Syukran Hakim, Norazman (2013) Study on an application of bioengineering by layer TIRF measurement. Masters thesis, Tokyo University of Science.

        Geoffrey, Ogadimma Asiegbu (2013) Defect detection on electrical power equipment using thermal imaging technology. Masters thesis, Universiti Malaysia Pahang.

        Rodianah, Alias (2013) An Inexpensive & Safe Method for Preparation of Caryophyllene Oxide. Masters thesis, Universiti Malaysia Pahang.

        Marlina, Yakno (2013) Intelligent hand vein image exposure system to aid peripheral intravenous access. Masters thesis, Universiti Sains Malaysia.

        Nurul Hazlina, Noordin (2013) Adaptive array antenna design for wireless communication systems. PhD thesis, University of Edinburgh.

        Liza Evianti, Tanjung (2013) Assessment of heavy metal deposition in surface water and sediment in Balok and Tunggak River, Kuantan, Malaysia. Masters thesis, Universiti Malaysia Pahang.

        Abas, M. F. (2013) Autonomous formation flight control of multiple UAVs with motion capture system. PhD thesis, Chiba, Japan : Chiba University.

        Mohd Adnin, Hamidi (2013) Comparison of PRF and toluene/n-heptane mixture in the mechanism of compression ignition using transient species measurements and simplified model analysis. Masters thesis, Toyama University.

        Ummu Kulthum , Jamaludin (2013) Developing and validating a new comprehensive glucose-insulin pharmacokinetics and pharmacodynamics model. PhD thesis, University of Canterbury, Christchurch, New Zealand .

        Ahmad Shahir, Jamaludin (2013) Development of fem model for high speed machining using small ball end milling processes. Masters thesis, Universiti Malaysia Sarawak.

        Bello, Ibrahim Garko (2013) Development of new green demulsifier composition for oil production. Masters thesis, Universiti Malaysia Pahang.

        Nur, Cholis (2013) Electro-mechanical single acting pulley rubber V-belt continuously variable transmission (EMSAP RVB-CVT) for scooter. Masters thesis, Universiti Malaysia Pahang.

        Mohd Hazwan, Abd Latif (2013) Estimation of operational intention and personal adaptation in power assist system. Masters thesis, Toyohashi University of Technology.

        Azri, Alias (2013) Evaluation of various estimation equations for particle-fluid interaction forces and modeling of heat transfer between particles for dem simulations. PhD thesis, Okayama University of Science.

        Ahmad Najmuddin, Ibrahim (2013) Experimental development of stiffness-variable foot sole mechanism for bipedal robots. Masters thesis, Ibaraki University, Japan.

        Akindoyo, Edward Oluwasoga (2013) Introducing a new trio effects portable water treatment plant for rural areas. Masters thesis, Universiti Malaysia Pahang.

        Mohd Faizan, Jamaluddin (2013) Isolation and identification of acetic acid producer from soil using banana stem waste as a substrate. Masters thesis, Universiti Malaysia Pahang.

        Nur Farahain, Khusnun (2013) Jatropha oil based bio-adhesive for plywood application. Masters thesis, Universiti Malaysia Pahang.

        Tengku Khamanur Azma, Tg. Mohd Zamri (2013) Melastoma malabathricum L . natural preservatives business plan. Masters thesis, Universiti Malaysia Pahang.

        Nor Ashikin , Abdul Hamid (2013) Natural dye products business plan. Masters thesis, Universiti Malaysia Pahang.

        Nik Nor Aziati, Abd Aziz (2013) Optimization of pre-treatment process of glycerol residue for succinic acid production. Masters thesis, Universiti Malaysia Pahang.

        Rashidi, Abbas (2013) Pembangunan akhlak dalam kalangan pelajar institusi pengajian tinggi awam di Malaysia menerusi penerapan kemahiran insaniah. PhD thesis, Universiti Malaya.

        Nurizzatul Atikha, Rahmat (2013) Prediction of maximum strain and strain rate in SHPB specimens based on energy analysis. Masters thesis, Japan , Okayama University.

        Muhammad Suhaimi, Man (2013) Production of Bio-Oil from Empty Fruitbunch (EFB) via Pyrolysis Process. Masters thesis, Universiti Malaysia Pahang.

        Siti Aisyah Radhiah, Mohamed @ Ayub (2013) Production of beta-keratin from chicken feathers. Masters thesis, Universiti Malaysia Pahang.

        Siti Norsita, Mohd Rawi (2013) Regeneration and recycling hemodialysis membrane dialyzer. Masters thesis, Universiti Malaysia Pahang.

        Abdul Nasir, Abd Ghafar (2013) Research of material dispersion in optical materials for optical waveguides. Masters thesis, Universiti Malaysia Sarawak.

        Mohamad Zairi , Baharom (2013) Sistem brek elektromagnetik boleh kawal menggunakan arus pusar. Masters thesis, Universiti Kebangsaan Malaysia.

        Jasri, Mohamad (2013) Springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation. PhD thesis, University of Strathclyde.

        Khairool Azizul , Mohammad (2013) Strength agent application in mechanical pulps for packaging application. Masters thesis, Monash University.

        Noor Atikah, Mohd Badruddin (2013) Zeolites catalyst from oil palm ash for petrochemical industries. Masters thesis, Universiti Malaysia Pahang.

        Mohd Azimie , Ahmad (2012) Investigating the Performance of OKRA - Natural Mucilage Compounds as Flow Improver in Pipelines Carrying Liquid – Solid Solution. Masters thesis, Universiti Malaysia Pahang.

        Muhammad Faisal, Siddiqui (2012) The Anti-Biofouling Effect of Piper Betle Extract on Membrane Biofouling in Bioreactor for Batik Wastewater Treatment. PhD thesis, Universiti Malaysia Pahang.

        Souleyman, Ahmat Issaka (2012) Application of microwave and ultrasonic demulsification techniques on petroleum based emulsions. PhD thesis, Universiti Malaysia Pahang.

        Rumana, Ghufran (2012) Enhanced Anaerobic Degradation Of Palm Oil Mill Effluent Using Butyrate, Cao-Ckd And Denitrifying Sulfide Removal. PhD thesis, Universiti Malaysia Pahang.

        Ma, Xiuqin (2012) New Parameter Reduction of Soft Sets. PhD thesis, Universiti Malaysia Pahang.

        Ayib Rosdi, Zainun (2012) Characterization of tmed-copper (I) iodide (Cul) thin film and performance for solid state dye sensitized solar cell applications. PhD thesis, Universiti Teknologi Mara.

        Rahmah, Mokhtar (2012) Model pengguna aplikasi tutoran web adaptif pintar. PhD thesis, Universiti Kebangsaan Malaysia.

        Mohd Ridzuan, Darun (2012) The determinants of working capital management practices Malaysian perspective. PhD thesis, Lincoln University.

        At-Tasneem, Mohd Amin (2012) A study on the applicability of symbolic computation in stabilising control design for switched systems. Masters thesis, Universiti Kebangsaan Malaysia.

        Leong Ming, Gan (2012) Development of dish-stirling concentrating solar thermal-electric energy conversion system. PhD thesis, Universiti Malaysia Pahang.

        Khandakar Fazley, Rabbi (2012) Development of efficient t-way test data generation algorithm and execution strategies. Masters thesis, Universiti Malaysia Pahang.

        Santi Puteri Rahayu, - (2012) Logistic regression methods for classification of imbalanced data sets. Masters thesis, Universiti Malaysia Pahang.

        Nurul Hidayah, Razak (2012) Machining characteristics of hastelloy c-2000 in end milling using artificial intelligence approach. Masters thesis, Universiti Malaysia Pahang.

        Thamir Khalil, Ibrahim (2012) Modeling and performance enhancements of a gas turbine combined cycle power plant. PhD thesis, Universiti Malaysia Pahang.

        Saifudin, Razali (2012) Smoothing techniques and a spherical simplex unscented transformation in solving a SLAM problem. PhD thesis, Okayama University.

        Tg Mahizatulazwa, Tg Kamaruddin (2012) Synthesis and characterization of alumina nanofiber filled poly ether ether ketone (PEEK). Masters thesis, Universiti Malaysia Pahang.

        Md. Nurul Islam, Siddique (2012) Treatment and enhanced degradation of petrochemical wastewater by continuous stirred tank reactor. Masters thesis, Universiti Malaysia Pahang.

        Budi, Wiyarno (2012) A study on the ultrasonic oil extraction and in situ transestrification of microalgae biodiesel. Masters thesis, Universiti Malaysia Pahang.

        Noor Fatihah , Mazlam (2012) Enhancement of stemming process for malay illicit web content. Masters thesis, Universiti Teknologi Malaysia.

        Siti Nuraffini , Kamarulizam (2012) Formulation a dual effect natural drag reduction agent. Masters thesis, Universiti Malaysia Pahang.

        Sajadin, Sembiring (2012) An application of predicting student performance using kernel k-means and smooth support vector machine. Masters thesis, Universiti Malaysia Pahang.

        Khan, Md. Ashikur Rahman (2012) An experimental investigation and modelling of the electrical discharge machining performance on titanium alloy Ti-5A1-2.5Sn. PhD thesis, Universiti Malaysia Pahang.

        Selvakumar, Raja Saravana Kumar (2012) Design of multiple microcontrollers platform for use in academic environment. Masters thesis, Universiti Malaysia Pahang.

        Shaharuddin , Kormin (2012) Development and characterization of biodegradable blends of low density polyethylene (LDPE) incorperated with thermoplastic sago starch. Masters thesis, Universiti Malaysia Pahang.

        Noraini, Misran (2012) Penentu kepimpinan berorientasikan pekerja dantugas terhadap kejayaan projek di kalangan kontraktor binaan di kuantan pahang. Masters thesis, Universiti Malaysia Pahang.

        Noriyani , Mohd Zin (2012) A novel deadlock detection algorithm for neighbour replication on grid environment. Masters thesis, Universiti Malaysia Pahang.

        Muhammad Sharfi, Najib (2012) Agarwood classification based on odor profile using intelligent signal processing technique. PhD thesis, Universiti Teknologi Mara.

        Nor Rul Hasma, Abdullah (2012) Computational intelligence based power system security assessment and improvement under multicontigencies conditions. PhD thesis, Universiti Teknologi MARA.

        Muhammad Remanul, Islam (2012) Effect of fibre surface treatment on kenaf filled recycled polypropylene composite. Masters thesis, Universiti Malaysia Pahang.

        Mohd Shafiq , Mohd Sueb (2012) Efficient cultivation of Kluyveromyces Lactis in high cell density culture in fed-batch cultivation system. Masters thesis, Universiti Teknologi Malaysia.

        Ahmmad Shukrie, Md Yudin (2012) Studies on the residence time distribution of solids in a swirling fluidized bed. Masters thesis, Universiti Teknologi Petronas.

        Mohd Fairusham, Ghazali (2012) Leak detection using instantaneous frequency analysis. PhD thesis, The University of Sheffield.

        Mustafa Mohamed, Mustafa Mahdi (2012) Telecommuting from the company perspective:employer intention to implement telecommuting. Masters thesis, Universiti Malaysia Pahang.

        Salimah, Shafii (2012) The effect of preparation methods condition on the activity of palladium and platinum catalysts towards. Masters thesis, Universiti Malaysia Pahang.

        Sharifah Maszura, Syed Mohsin (2012) Behaviour of fibre-reinforced concrete structures under seismic loading. PhD thesis, Imperial College London.

        Mohd Hasnun Arif , Hassan (2012) Design of a dynamometer engine coupling shaft. Masters thesis, Universiti Malaya.

        Irawan, Addie (2012) Force and impedance control for hydraulically driven hexapod robot walking on uneven terrain. PhD thesis, Chiba University.

        Hai, Tao (2012) Image watermarking optimization algorithms in transform domains and feature regions. PhD thesis, Universiti Malaysia Pahang.

        Mohd Razali , Daud (2012) LRF assissted mapping and obstacle avoidance for hexapod robot Comet. PhD thesis, Chiba University.

        Mohamad Firdaus, Basrawi (2012) Performance analysis and optimization biogas-fuelled cogeneration systems in sewage treatment plants. PhD thesis, Kitami Institute of Technology, Hokkaido, Japan.

        Abu Kashem Moshiul, Mohammad Alam (2012) Preparation and characterization of biodegradable poly lactid acid (PLA) composites with oil palm empty fruit bunch (EFB) fiber. Masters thesis, Universiti Malaysia Pahang.

        Mohamad Heerwan , Peeie (2012) Skid control of small electric vehicle with hydraulic-mechanical hybrid brake system. Masters thesis, School of Engineering.

        Norhayati, Rosli (2012) Stochastic Runge-Kutta method for stochastic delay differential equations. PhD thesis, Universiti Teknologi Malaysia.

        Abdul Rahman, Hassan (2012) Synthesis and characterization of skinned-oriented asymmetric low pressure nanofiltration membrane. PhD thesis, Universiti Malaysia Pahang.

        N. M. Zuki, N. M. (2012) The development of a hybrid knowledge-based system for designing a low volume automotive manufacturing environment. PhD thesis, University of Bradford.

        Norlinda , Mohd Rozar (2012) The effectiveness of e-learning training in industrial safety and health:a case in FCM company. Masters thesis, Universiti Malaysia Pahang.

        Ali, A. J. Adham (2012) An integrated model for production line balancing planning. PhD thesis, Universiti Malaysia Pahang.

        Ahmad Afif, Mohd Faudzi (2012) Acquisition of context-based word recognition by reinforcement learning using a recurrent neural network. Masters thesis, Oita University.

        Liang, Yong Yeow (2012) Development of block-oriented model for reactive distillation column: MTBE synthesis. Masters thesis, Universiti Malaysia Pahang .

        Zuraina , Ali (2012) Effects of three vocabulary learning techniques on vocabulary retention. PhD thesis, Universiti Putra Malaysia.

        Wan Mohd Hafizuddin, Wan Yussof (2012) Evaluation of heterogeneous quaternary ammonium catalyst for transesterification of trigycerides. PhD thesis, Newcastle University .

        Norhazimah, Abdul Halim (2012) Identification and optimization of process parameters for the production of bioethanol from the fermentation of oil palm trunks SAP. Masters thesis, Universiti Malaysia Pahang.

        Xiao, Rui (2012) Lane markings detection based on e-maxima transformation and improved hough. Masters thesis, Universiti Malaysia Pahang.

        Kamisah, Kormin (2012) The contextual factors in the recognition of commercialization opportunity among Malaysian public universities researchers. Masters thesis, Universiti Malaysia Pahang.

        Muhammad, Rauf (2012) Design of real time intelligent buses notification system for passengers. Masters thesis, Universiti Malaysia Pahang.

        Norfariza, Ab. Wahab (2012) Estimation of corrugated cardboard strength with a new tensile or shear test method. Masters thesis, Universiti Malaysia Pahang.

        Norfariza , Ab. Wahab (2012) Estimation of corrugated cardboard strength with a new tensile or shear test method. Masters thesis, Nagaoka University of Technology.

        Norfariza, Ab. Wahab (2012) Estimation of corrugated cardboard strength with a new tensile or shear test method. Masters thesis, Nagaoka University of Technology.

        Ahmad Syahiman, Mohd Shah (2012) Pattern layout optimization for low series resistance and capacitance in gan schottky barrier diodes. Masters thesis, University of Fukui .

        Ruzaini, Abdullah Arshah (2012) Assessment instrument for integrated information system success in institution of higher learning. PhD thesis, Universiti Teknologi Malaysia.

        Nor Hidawati, Hj Elias (2012) Production of succinic acid from glycerol and glycerol waste. Masters thesis, Universiti Malaysia Pahang.

        Khalaf Ibrahim, Hamada (2012) A study of the heat transfer in hydrogen fueled internal combustion engine. PhD thesis, Universiti Malaysia Pahang.

        Zulkifli, Ahmad @ Manap (2012) Analisis kepatahan ke atas vertebra lumbar tulang belakang menggunakan kaedah unsur terhingga dan monte carlo. Masters thesis, Universiti Kebangsaan Malaysia.

        Ahmad Redza, Ahmad Mokhtar (2012) Deposition of high hardness coating by low power atmospheric pressure microwave plasma spray and the characteristics evaluations. Masters thesis, Toyohashi University of Technology.

        Gan, Leong Ming (2012) Development of dish-stirling concentrating solar thermal-electric energy conversion system /. PhD thesis, Universiti Malaysia Pahang.

        Mansor, Sulaiman (2012) Hubungan sunnah Allah dan pembinaan akhlak dalam kebangunan tamandun. PhD thesis, Universiti Malaya.

        Mohd Fadhlan, Mohd Yusof (2012) Pemantauan dan penilaian retak lesu ke atas talian paip gas dengan menggunakan teknologi pancaran akustik. Masters thesis, Universiti Kebangsaan Malaysia.

        Mohd Hanafi , Muhammad Sidik (2012) Research on spiral movement robot. Masters thesis, Tokyo, Japan : Takushoku University.

        Erny Afiza, Alias (2012) Skin friction reduction by micro bubbles in pipe flow. Masters thesis, Tokai University.

        Abdul Azim, Jais (2012) Study for detection of metallic contaminant in electrode of lithium-ion battery using a Hall probe. Masters thesis, Toyohashi University of Technology.

        Ramdan , Razali (2012) V/I control method and its an implementation for maximizing attainable efficiency of induction motor. PhD thesis, Multimedia University Malaysia.

        Ngahzaifa, Ab Ghani (2012) An evaluation of the potential of adaptive neuro-fuzzy inference system in hydrological modelling and prediction. PhD thesis, University of Nottingham.

        Asdarina, Yahya (2011) Kajian terhadap pelbagai teknik pengekstrakan minyak pati dari tanaman nilam (pogostemon cablin benth). Masters thesis, Universiti Malaysia Pahang.

        Solly, Aryza (2011) Speed estimation techniques for induction motor using digital signal processing. Masters thesis, Universiti Malaysia Pahang.

        C. K., Cheng (2011) Synthesis gas production from glycerol steam reforming over alumina supported bimetallic Co-Ni catalyst. PhD thesis, University of New South Wales .

        Kui Cheng, Chin (2011) Synthesis gas production from glycerol steam reforming over alumina supported bimetallic Co-Ni catalyst. PhD thesis, The University of New South Wales Sydney Australia.

        Nasrul, Hadi Johari (2011) The effect of tracheal stenosis on airflow using numerical modelling. Masters thesis, Universiti Teknologi Malaysia .

        Hafizoah, Kassim (2011) The impact of using a multimedia learning tool on mechanical engineering students' creativity. Masters thesis, International Islamic University Malaysia .

        Triantoro, Safaria (2011) The investigation of Relationship Between Leadership Practices, Role Stressor, Religious Coping and Job Insecurity With Job Stress Among University Academician In Pahang And Jogyakarta. PhD thesis, Universiti Malaysia Pahang.

        Roshamimi , Faisal (2011) Kajian terhadap hubungan ciri-ciri inovator pengurusan dengan keinovatifan individu di Politeknik Kementerian. PhD thesis, Universiti Malaysia Pahang.

        Zakri , Ghazali (2011) Development of intelligent evaluation system for product end-of-life selection strategy. PhD thesis, Japan , Okayama University.

        Sri Murni, Astuti (2011) Optimization process of binahong extraction and characterization study. Masters thesis, Universiti Malaysia Pahang.

        Noor Intan Shafinas, Muhammad (2011) Computational fluid dynamics of industrial scale spray dryer. Masters thesis, Universiti Malaysia Pahang.

        Siti Nur Sakinah, Jamaludin (2011) Development of regenerative piezoelectric linear generator for alternative power generation. Masters thesis, Universiti Malaysia Pahang.

        Hai, Jing (2011) Dynamic analysis of photovoltaic/wind turbine hybrid micro-grid energy system. Masters thesis, Universiti Malaysia Pahang.

        Ding, Gong Tao (2011) The optimisation and scale-up of microalgae cultivation for high level oil content for biodiesel. Masters thesis, Universiti Malaysia Pahang.

        Ambarwati, Dessy (2011) Characterization and process optimization of Melastoma malabathricum l. extract. Masters thesis, Universiti Malaysia Pahang.

        Riaz , Ul Haq (2011) Design and simulation of variants of koch models for fractal antenna. Masters thesis, Universiti Malaysia Pahang.

        Hernawati, Lahading (2011) Development of chitosan based adsorbent for the removal of residual oil from palm oil mill effluent (POME). Masters thesis, Universiti Malaysia Pahang .

        Semin, Semin (2011) Development of new injector for compressed natural gas engine and the effect on performance. PhD thesis, Universiti Malaysia Pahang.

        Ahmad Fakhri, Ab. Nasir (2011) Peningkatan halaju suapan maksimum penginterpolasi CNC dedenyut rujukan menggunakan pengaturcaraan selari. Masters thesis, Universiti Malaysia Pahang.

        Ade Chandra, Iwansyah (2011) Studies of water-soluble extract of Labisia Pumila var Alata of selected geographic origins. Masters thesis, Universiti Malaysia Pahang.

        Handrizal, M (2011) An improved algorithm for channel allocation on direct sequence spread spectrum. Masters thesis, Universiti Malaysia Pahang.

        Wan Sulaiman, Wan Mohamad (2011) A study of energy utilisation in a variable link length 3 DOF revolute articulated manipulator. Masters thesis, Universiti Malaysia Pahang.

        Mohd Najib, Razali (2011) Adsorption treatment of monoethanolamine (MEA) wastewater from oil and gas industry. Masters thesis, Universiti Malaysia Pahang .

        Meng, Liu (2011) Identification and partial characterisation of locally isolated lipolytic bacteria. Masters thesis, Universiti Malaysia Pahang.

        Zulkarnain, Lubis (2011) Three phase induction motor coupled to DC motor in hybrid electric vehicle application. PhD thesis, Universiti Malaysia Pahang.

        Hemin M., Mohyaldeen (2011) Analysis of an automobile suspension arm using the robust design method. Masters thesis, Universiti Malaysia Pahang.

        Norrihan, Sulan (2011) A corpus-based study of morphological productivity of English language chemical engineering textbooks. PhD thesis, Universiti Teknologi Mara.

        Siti Umairah , Mokhtar (2011) Application of dispersive liquid-liquid microextraction based on solidification of floating organic droplet in the analysis of anti-depressant drugs. Masters thesis, Universiti Teknologi Malaysia .

        Aini Norhidayah, Mohamed (2011) Determination of thermal oxidation marker of frying palm oil in relation to total polar compounds. Masters thesis, Universiti Malaysia Pahang.

        Syurahbil, A (2011) Network instrusion prevention system ( NIPS) based on network intrusion detection system (NIDS) and ID3 algorithm. Masters thesis, Universiti Malaysia Pahang.

        Mohamad Kamil, Mohammed (2011) Simulation models to optimise hydrogen fuelled engine performance. PhD thesis, Universiti Malaysia Pahang.

        Aguk Zuhdi, Muhammad Fathallah (2011) Design and simulation of a single cylinder high speed spark ignition linear engine with spring system. PhD thesis, Universiti Malaysia Pahang.

        Saiful Riza, Zainul Abidin (2011) Efficiency improvement of LDO ouput based linear regulator with supercapacitor energy recovery - a versatile new technique with an example of a 5v to 1.5 v version. Masters thesis, The University of Waikato .

        Nor Ilia Anisa, Aris (2011) Demulsification of water-in- oil (W/O) emulsion by microwave heating technology. Masters thesis, Universiti Malaysia Pahang .

        Nor Amizam, Jusoh (2011) Segmentation and recognition of Malaysian car plates using Freeman chain codes. Masters thesis, Universiti Malaysia Pahang.

        Norasiha, Hamid (2011) Inclusion complex formation between natural dye extracted from pitaya fruit skin and β-cyclodextrin : kinetic and thermodynamic study. Masters thesis, UNIVERSITI MALAYSIA PAHANG .

        Khairul Fikri, Muhamad (2011) Optimization of cutting parameters for CO2 laser beam cutting using variable wiight grey-taguchi method. Masters thesis, Universiti Malaysia Pahang.

        Mahendran, Samykano and Mustafizur, Rahman and Devarajan, Ramasamy and Kumaran, Kadirgama and Muhamad, Mat Noor and Mohd. Reza, Jailani and Wan Sharuzi, Wan Harun and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system = membangunkan EDM mikro menggunakan aktuator mikro sebagai sistem penyuapan pemotongan. Other thesis, Universiti Malaysia Pahang.

        Mohd Ashraf , Ahmad and Mohd Syakirin , Ramli and Nasrul Salim , Pakheri and Nor Maniha , Abdul Ghani and Raja Mohd Taufika, Raja Ismail (2011) Experimental investigations of command shaping techniques for antsway control of double pendulum gantry crane system = kajian penyiasatan teknik pembentukan arahan untuk kawalan anti-ayunan bagi sistem kren dwi-pendulum. Other thesis, Universiti Malaysia Pahang.

        Korada, Viswanatha Sharma and Wan Azmi , Wan Hamzah and Rosli , Abu Bakar and Muhammad , Mat Noor and Kumaran , Kadirgama and D. M. R., Prasad and Mohd Irza Pairuz, Zamri (2011) Heat transfer augmentation with aluminium oxide nanofluid in a plain tube and with inserts. Other thesis, Universiti Malaysia Pahang.

        Mahendran, Samykano and T., Nagarajan and Dr., Majdi and Devarajan, Ramasamy and Kumaran, Kadirgama and Muhamad, Mat Noor and Lee, Giok Chui and Mohd Fazli, Ismail (2011) Investigation of micromachining of silicon using micro-EDM = penyelidikan dalam pemesinan mikro bagi silicon menggunakan EDM mikro. Other thesis, Universiti Malaysia Pahang.

        Nurrina, Rosli (2011) Measurement of liquid film flow on inclined wall using photochromic dye marking method. Masters thesis, Gunma University.

        Norazura , Ismail (2011) Risk management of neurobehavioral health of tyre manufacturing industry workers exposed to naphtha. PhD thesis, Universiti Putra Malaysia.

        Kamal, Ariffin (2011) Study of wear mechanism in the contact between table liner and roller of vertical roller mills. Masters thesis, Saitama University.

        Nor Maniha, Abdul Ghani and Raja Mohd Taufika , Raja Ismail and Nurul Hazlina , Noordin and Mohd Ashraf, Ahmad (2011) Trajectory tracking control of two wheels mobile robot = trajektori kawalan penjejakan sistem robot dua tayar. Other thesis, Universiti Malaysia Pahang.

        Norazila, Jaalam and Ahmed Mohamed, Ahmed Haidar and Noor Lina, Ramli and Nor Laili, Ismail (2011) A neuro-fuzzy approach for stator resistance estimation of induction motor = pendekatan neuro-fuzzy untuk meramal rintangan stator pada motor induksi. Other thesis, Universiti Malaysia Pahang.

        Noor Faddly , Mohamad (2010) Performance of concrete by using pulverized fuel ash (PFA) as a cement replacement material. PhD thesis, Universiti Malaysia Pahang.

        Mohd Shaiful Azman, Abdul Rahim (2010) Screening and optimisation study on antioxidant extracts from selected lamiaceae plants. Masters thesis, Universiti Malaysia Pahang.

        Nurzahida, Mohd Zaid (2010) Visualization of intracellular ice crystal formation using x-ray micro-computed tomography /. Masters thesis, Faculty of Chemical and Natural Resource Engineering .

        Rihab Hussein , Jawad (2010) Production of biosurfactant from locally isolated bacteria. Masters thesis, UNIVERSITI MALAYSIA PAHANG.

        Zuraidah, Mohd Ali (2010) Development of pretreatment techniques for high productivity gaharu extraction. Masters thesis, Universiti Malaysia Pahang.

        Nugroho , Dewayanto (2010) Waste to valuable by product - utilization of carbonised decanter cake from palm oil milling plant as an effective adsorbent for heavy metal ions in aqueous solution. Masters thesis, Universiti Malaysia Pahang.

        Norhaiza Ghazali , Ghazali (2010) Development of terrain height multipliers and roughness lengths for Seberang Perai reogion. Masters thesis, Universiti Malaysia Pahang.

        Norainon, Mohamed (2010) Modelling and switching simulation of gate turn-off thyristor using finite element method. Masters thesis, Universiti Malaysia Pahang.

        Liyana, Mohamed Yusof (2010) Accessibility for wheelchair users in public parks : a comparison between Adelaide and Kuantan. Masters thesis, The University of Adelaide.

        Devarajan, Ramasamy and Mahendran, Samykano and Kumaran, Kadirgama and Lee, Giok Chui and Muhamad, Mat Noor and Mahdhir, Mohd Yusof (2010) Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method = membangunkan pam mikro untuk penggunaan sel bahan api menggunakan sistem mikro elektro-mechanical (MEMS). Other thesis, Universiti Malaysia Pahang.

        Juliawati , Alias and Mohamad Mazwan , Mahat and Mohd Akramin , Mohd Romlay (2010) Developments of aneurysm rupture prediction method using fracture mechanics analysis = pembangunan kaedah jangkaan pemecahan aneurisma menggunakan analisis mekanik rekahan. Other thesis, Universiti Malaysia Pahang.

        Nik Aloesnita, Nik Mohd Alwi (2010) Examining the language learning potential of a task-based approach to synchronous computer-mediated communication. PhD thesis, Victoria University of Wellington .

        Yap, Chui Yan (2010) Predictive effects of managerial need support, basic psychological need satisfaction, and role overload on work engagement. PhD thesis, UNIVERSITI KEBANGSAAN MALAYSIA.

        Norsyahida , Mohammad (2010) Producing hydrogen from seawater electrolysis. Masters thesis, RMIT University.

        Awang, Idris (2009) Effect of compressed natural gas on performance and emission of a 4-stroke spark ignition engine /. Masters thesis, Universiti Malaysia Pahang.

        Dayangku Noorfazidah, Awang Sh'ri (2009) Effect of surface pretreatments on the deposition of polycrystalline diamond on silicon nitride substrates using hot filament chemical vapor deposition method. Masters thesis, Universiti Teknologi Malaysia.

        Khairunisa, Muthusamy (2009) Properties of palm oil fuel ash cement based aerated concrete. PhD thesis, Universiti Teknologi Malaysia.

        Mohd Anwar, Zawawi (2008) Active suspension system design for railway vehicles transporting sensitive goods and hazardous materials. Masters thesis, Universiti Malaysia Pahang.

        A. W., Zularisam (2008) Natural organic matter removal from surface water using submerged ultrafiltration membrane unit. PhD thesis, Universiti Teknologi Malaysia .

        Zahrizan, Zakaria (2007) Web based information model to support maintenance and operations management. Masters thesis, Universiti Malaysia Pahang.

        Noraziah, Ahmad (2007) Managing replication and transactions using neighbour replication on data grid. PhD thesis, Universiti Malaysia Terengganu .

        Nor Maniha, Abd Ghani (2006) Active steering for vehicle system using sliding mode control. Masters thesis, Universiti Malaysia Pahang .

        Jasni, Mohamad Zain (2005) Digital Watermarking in Medical Images. PhD thesis, Brunel University, West London.

        Hamzah, Ahmad (2004) Feasibility study on robot off-line programming and simulation using matlab tools : simmechanics and simulink packages. Masters thesis, Universiti Malaysia Pahang.

        Hamdan, Daniyal (2004) Study on interoperability problems among CAD/CAM systems in automotive industry. Masters thesis, Universiti Malaysia Pahang.

        A. R., Razali (2004) Vehicle color glossiness study using SPC in an automotive manufacturing company. Masters thesis, Universiti Malaysia Pahang.

        Mahfuzah, Mustafa (2004) Connection siemens PLC (programmable logic control) to labview using OPC (ole for process control). Masters thesis, Universiti Malaysia Pahang.

        Mohd. Rusllim, Mohamed (2004) Decision tree-based approach for online management of PEM fuel cells for residential application. Masters thesis, Universiti Malaysia Pahang.

        Nor Rul Hasma, Abdullah (2004) Electron beam sterilization. Masters thesis, Universiti Malaysia Pahang.

        Razali , Muda (2004) Proses fabrikasi dan pencirian bahan polimer HD4000 untuk aplikasi fotonik. Masters thesis, Universiti Malaysia Pahang.

        Maziyah, Mat Noh (2003) Liquid level sensing device. Masters thesis, Newcastle-upon-Tyne, UK.

        This list was generated on Thu May 5 17:44:56 2016 MYT.
        Fri May 6 14:48:37 2016