Browse by Type

A

A. K. M., Moshiul Alam (2016) Fabrication and characterization of modified multi walled carbon nanotube reinforced unsaturated polyester nanocomposites. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

A. R., Razali (2004) Vehicle color glossiness study using SPC in an automotive manufacturing company. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abbas, Mohammed Ausama Al-Sarraf (2017) Development of sugar palm fibre reinforced thermoplastic polyurethane composites. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abbas Saliimi, Lokman (2011) Chatbot development in data representation for diabetes education. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Zain, Jasni).

Abd. Aziz, Mohd Azoddein (2013) Mercury removal from petroleum based industries wastewater by Pseudomonas putida ATCC 49128 in membrane bioreactor. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Mohd Yunus).

Abdalla A. M., Ben Ali (2016) Investigation on asphaltene precipitation during carbon dioxide flooding for oil recovery. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zulkefli, Yaacob).

Abdel Rahman Mohamed Ismail, Farouk Abdel Mageed Rady (2021) Analyzing the cost-effectiveness of enhancement approaches for rehabilitating water distribution network. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahman, Abdul Rahimi).

Abdelhakim, Deboucha (2016) A comprehensive analysis of surface electromyography for control of lower limb exoskeleton. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zahari, Taha).

Abdolbaqi, Mohammed Khdher (2017) Heat transfer enhancement of bioglycol/water based TiO2 and SiO2 nanofluids in a flat tube with twin twisted tapes. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdul Azim, Jais (2012) Study for detection of metallic contaminant in electrode of lithium-ion battery using a Hall probe. Masters thesis, Toyohashi University of Technology (Contributors, Thesis advisor: Ryoji, Inada).

Abdul Hafaz, Ngah (2016) Barriers and enablers to the adoption of halal transportation and halal warehousing services among halal manufacturers in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zainuddin, Yuserrie).

Abdul Muiz, Hasim (2023) Cracking behaviour of coal ash concrete based on acoustic emission technique. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Khairul Anuar, Shahid).

Abdul Nasir, Abd Ghafar (2016) Development and analysis of low-cost wearable servo valve using buckled tubes and embedded controller. PhD thesis, Okayama University of Science (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdul Nasir, Abd Ghafar (2013) Research of material dispersion in optical materials for optical waveguides. Masters thesis, Universiti Malaysia Sarawak (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdul Qahar, Sarwari (2017) The relationship between interpersonal communication competence, intercultural communication competence and heart rate variability among international postgraduate students. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdul Rahman, Hassan (2012) Synthesis and characterization of skinned-oriented asymmetric low pressure nanofiltration membrane. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdul Rahman, Zahari (2019) Entrepreneurial intentions and capabilities on student enterprises’ performance in Malaysian higher educational institutions. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdulhadi, Hassan Abdulrssoul (2017) Thermal wear behaviour of H13 tool steel in die casting process. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdulkarim Abdulrahman, Mohamed Suliman (2023) A study on hybrid photocatalytic pre-treatment for seawater desalination by using oil palm fibre ash. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Ruzinah, Isha).

Abdullah, Long (2017) Membangunkan garis panduan kaedah rawatan kesuburan IVF (In-Vitro Fertilization) berteraskan syarak. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mansor, Sulaiman).

Abdullah, Nayeem (2022) Synthesis of polysulfide adsorbent from waste cooking palm oil for the removal of iron (ⅲ). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jun Haslinda, Shariffuddin).

Abdulmajeed Ali Mohammed, Nasser Al-Hokabi (2022) Performance of soft clay stabilized with the replacement of palm oil fuel ash and gypsum. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muzamir, Hasan).

Abdulqader Al-Maamari, Azzat Esam (2020) Study on the mechanical and wear properties of Mg/SiC/Gr hybrid metal matrix composite. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdulsaheb, Ghaida Muttasher (2017) An enhanced cluster head selection algorithm for routing in mobile AD-HOC network. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sulaiman, Norrozila).

Abdulwahid, Omar Arman (2021) Numerical investigation of exhaust gas reforming of natural gas for on-board hydrogen-rich syngas production in spark ignition engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ftwi Yohaness, Hagos).

Abeed Fatima, Mohidin Batcha (2014) Biosynthesis of poly (3-hydroxybutyrate) (PHB) by cupriavidus necator H16 from jatropha oil as carbon source. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rahman Khan, Md. Maksudur).

Abu Hannifa, Abdullah (2014) Effects of the modifier types to thermal, mechanical and barrier properties of polylactic acid/modified nanoclay nanocomposite. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abu Jafar, Md Muzahid (2022) Reinforcement learning based decision-making model in autonomous vehicle control for cooperation and mitigation of collision among multiple vehicles. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syafiq Fauzi, Kamarulzaman).

Abu Kashem Moshiul, Mohammad Alam (2012) Preparation and characterization of biodegradable poly lactid acid (PLA) composites with oil palm empty fruit bunch (EFB) fiber. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abu Shadate, Faisal Mahamude (2022) Performance investigation of solar collector with cotton-based cnc and graphene hybrid nano fluids. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Sharuzi, Wan Harun).

Abushaiba, Ibrahim Ali (2013) Performance measurement information system and competitive capabilities in relation towards organizational performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: YUSERRIE, ZAINUDDIN).

Achmad, M. S. Hendriyawan (2020) Obstacles mapping based on 3-D perception for mobile robot navigation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Addie Irawan, Hashim (2012) Force and impedance control for hydraulically driven hexapod robot walking on uneven terrain. PhD thesis, Chiba University (Contributors, UNSPECIFIED: UNSPECIFIED).

Addila, Abu Bakar (2018) Design, synthesis of flavokawain b derivative and their cytotoxic effects on MCF-7 and MDA-MB-231 cell lines. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Akhtar, Muhammad Nadeem).

Ade Chandra, Iwansyah (2011) Studies of water-soluble extract of Labisia Pumila var Alata of selected geographic origins. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Adnan Mohammed, Hussein (2014) Heat transfer enhancement using nanofluids in the automotive cooling system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Afidatusshimah, Mazlan (2019) Correlation of welding current waveform with welding conditionbased on exploratory data analysis (EDA). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daniyal, Hamdan).

Aguk Zuhdi, Muhammad Fathallah (2011) Design and simulation of a single cylinder high speed spark ignition linear engine with spring system. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Bakar, Rosli).

Agus, Nugroho (2023) Performance enhancement of residential air conditioning system using fal2o3 and tio2-polyolester nanolubricant. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rizalman, Mamat).

Ahlam Mahmoud, Al-Jabali (2021) Temperature dependent viscosity on single-phase and two-phase flow of eyring powell fluid over a vertical stretching sheet. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad, Iftikhar (2019) EFL teacher cognition in grammar teaching: an investigation in the Saudi Arabian bilingual educational context at university level. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad, Mani Malam (2018) Sulfide removal from petroleum refinery wastewater using pseudomonas putida (ATCC 49128) and bacillus cereus (ATCC 14579). PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad, Omar (2023) Penggunaan modul GALUS berbantukan latihan biofeedback terhadap prestasi pelajar di sekolah rendah. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Muhammad Nubli, Abdul Wahab).

Ahmad, Othman (2012) A study on the management system in the healthcare sector using service quality concept. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad, Waqar (2020) Investigating the effects of smartboard on EFL learners’motivation and vocabulary achievement at a Saudi university. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad, Yazan Sadeq Al Sariera (2017) A bat-inspired t-way strategy for mixed-strength test suite generation. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kamal Z., Zamli).

Ahmad Affendi, Hashim (2015) An improved legibility guideline for text in web pages. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Majid, Mazlina).

Ahmad Afif, Mohd Faudzi (2012) Acquisition of context-based word recognition by reinforcement learning using a recurrent neural network. Masters thesis, Oita University (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Afif, Mohd Faudzi (2015) Policy abstraction for transfer learning using learning vector quantization in reinforcement learning framework. PhD thesis, Kyushu University (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Azwan, Abdul Razak (2019) Multi-objective spiral dynamic algorithms-based for a better accuracy and diversity. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Nor Kasruddin, Nasir).

Ahmad Azzreen, Dalawi (2021) Analysis and study of powerefficient sar adc for active rfid sensor. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Samsuri, Fahmi).

Ahmad Bazli, Bustary (2018) Biological treatment of petrochemical effluent containing benzene, toluene and xylene (BTX) using pseudomonas putida ATCC49128. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Azoddein, Abd Aziz).

Ahmad Fahmy, Jusoh (2020) Characterisation of kenaf fibre composite trapezoid sandwich structure based on corrugated core. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mat Rejab, Moho Ruzaimi).

Ahmad Faiz, Tharima @ Zainuddin (2011) Determining the causes of structural fire due to electrical fault in dwelling. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil, Mohd Idris).

Ahmad Faizrin, Ahmad Fuzlin (2023) Study on the ionic conduction properties of alginate based biopolymer electrolytes and its potential application in electrical double-layer capacitor. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Salihin, Samsudin).

Ahmad Fakhri, Ab. Nasir (2011) Peningkatan halaju suapan maksimum penginterpolasi CNC dedenyut rujukan menggunakan pengaturcaraan selari. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Farimin, Ahmad Osman (2014) Kesan suhu dan agen pengkapsul terhadap ciri-ciri fizikokimia serbuk rosel-nanas (hibiscus sabdariffa-ananas comocus). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nordin, Endut).

Ahmad Fikri Hadi, Abdul Rahman (2019) Membrane surface modification via ultraviolet-photografting for forward osmosis. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mazrul Nizam, Abu Seman).

Ahmad Fitri, Yusop (2015) Investigation of particulate matter and combustion characteristics of a diesel engine fueled with palm oil methyl ester and diesel blends. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Jahed, Mushtaq (2015) Habits and motives of reading newspaper among students in Al-Beroni Universiti of Afghanistan. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Johari, Mohamad (2004) Robust control power system stabilizer using LMI approach. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Kamal, Kunji (2019) A study on Malaysian roadside safety adopting safety recovery zone corridor concept. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kusbiantoro, Andri).

Ahmad Najmuddin, Ibrahim (2013) Experimental development of stiffness-variable foot sole mechanism for bipedal robots. Masters thesis, Ibaraki University, Japan (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Nasiruddin, Ab Razak (2014) Robust and reliable dual the classification system with error compensation module. Masters thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Nasser, Mohd Rose (2015) Kerangka kerja untuk pelaksanaan sistem pembuatan lean di perusahaan kecil dan sederhana (PKS) bagi komponen automotif. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Redza, Ahmad Mokhtar (2012) Deposition of high hardness coating by low power atmospheric pressure microwave plasma spray and the characteristics evaluations. Masters thesis, Toyohashi University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Redza, Ahmad Mokhtar (2016) Study on operational characteristics of low power atmospheric pressure microwave plasma spray method. PhD thesis, Toyohashi University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Ridzuan, Abu Bakar (2023) Building Information Modelling (BIM) execution plan framework : a case study of pre-approved plan (PAP) design modelling project in the Public Work Department (PWD) of Malaysia. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Ahmad Tarmizi, Haron).

Ahmad Saifuddin, Othman (2020) Estimation of the long term dryness pattern for Pahang state using integrated SDSM-SPI model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Shahir, Jamaludin (2013) Development of fem model for high speed machining using small ball end milling processes. Masters thesis, Universiti Malaysia Sarawak (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Syahiman, Mohd Shah (2016) Full-mode control in utilizing stored energy in lithium-ion batteries based on forecasted PV output implemented for HEMS. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Syahiman, Mohd Shah (2012) Pattern layout optimization for low series resistance and capacitance in gan schottky barrier diodes. Masters thesis, University of Fukui (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmed, Ehab Ali (2019) Water level forecasting using feed forward neural networks optimized by African Buffalo Algorithm (ABO). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmed, Hussam Alddin Shihab (2019) Designing substitution boxes based on chaotic map and globalized firefly algorithm. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zolkipli, Mohamad Fadli).

Ahmed, Muhammad Mahmood (2013) Contrast optimization by region adaptation (COBRA) for grey scale images. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jasni, Mohamad Zain).

Ahmed Hashabra, Amani Mohammad (2018) Optimization of enzymatic pretreatment and saccharification processes of sawdust for bioethanol production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmed Mostafa, Mohammed Ragab (2019) Investigation of adjustable valve of semi-active damper for improving ride comfort in a passenger car. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmed Yousif Adam, Mohammed (2017) Effect of tube inclination angle on the thermal and fluid dynamic performance of flat tube heat exchanger. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmmad Shukrie, Md Yudin (2012) Studies on the residence time distribution of solids in a swirling fluidized bed. Masters thesis, Universiti Teknologi Petronas (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmmad Shukrie, Md Yudin (2017) Performance characteristics of air distributor designs in a fluidized bed. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aidil Redza Khan, Mohamed Amir Khan (2021) Development of collision avoidance application using internet of things (loT) technology for vehicle-to-vehicle (v2v) and vehicle-to-infrastructure (v21) communication system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Faizal, Jamlos).

Aikhuele, Daniel Osezua (2017) Hybrid-fuzzy techniques with flexibility and attitudinal parameters for supporting early product design and reliability management. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aiman, Mohd Halil (2016) Ohmic contact formation of gallium nitride and electrical properties improvement. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aini Norhidayah, Mohamed (2016) Characterizing and isolating protein marker in authenticating eurycoma longifolia herbal products. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aini Norhidayah, Mohamed (2011) Determination of thermal oxidation marker of frying palm oil in relation to total polar compounds. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd. Yusoff, Mashitah).

Ainizar, Mustapa (2020) Menyelesaikan masalah perancangan jujukan pemasangan menggunakan algoritma penapis Kalman diselakukan. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zuwairie, Ibrahim).

Ainol Haryati, Ibrahim (2012) Podcasting as a tool in the development of public speaking skills. PhD thesis, International Islamic University Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Ainoon, Shabirin (2021) Potentials of non-ionic semi-rigid polymer assisted by cationic. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ainul Azila, Che Fauzi (2018) Binary vote assignment on grid quorum replication technique with association rule. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Noraziah).

Ainul Farhani, Ahmad Nizam (2021) Inhibition of free fatty acid formation in oil palm fruit by using buffer solution. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Sabri, Mahmud).

Ainur Munira, Rosli (2022) Microcutting performance monitoring – investigation on tool failure criterion. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Shahir, Jamaludin).

Aisha, Muhammad (2022) A generalized laser simulator algorithm for optimal path planning in constraints environment. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohammed Abdo, Hashem).

Aisyah Khaleeda, Rosli (2020) Pre-school teachers’ beliefs towards early english language learning (ELL) among pre-schoolers in the east coast states of peninsular Malaysia. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ajibike, Waliu Adeniyi (2021) The effect of organisational internal factors and technology orientation on environmental sustainability performance of Malaysian construction firms. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Adekunle Qudus, Adeleke).

Ajith, Gopi (2022) Performance modelling and analysis of a utility scale solar photovoltaic power plant in a tropical region. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sudhakar, Kumarasamy).

Akbari, Sweeta (2016) Formation of water in crude oil emulsions and microwave-assisted chemical demulsification. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Akhyari, Nasir (2019) A dimension-based information security culture model for information security policy compliance behavior in Malaysian public universities. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ruzaini, Abdullah Arshah).

Akindoyo, John Olabode (2015) Oil palm Empty Fruit Bunch (EFB) fiber reinforced poly(lactic) acid composites : effects of fiber treatment and impact modifier. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Akindoyo, John Olabode (2018) Preparation and characterization of hydroxyapatite (HA) from cow bone and its composite with poly (lactic acid) for bone replacement. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Al Adresi, Alaeldeen Saleh M. (2017) Strategic human resource management practices, perceived organisational support and employee trust towards organisational commitment. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Al Noman Ranak, Md Sayfullah (2018) A press touch code based secure graphical password scheme for smart devices. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Azad, Saiful).

Al Sayaydeh, Osama Nayel Ahmad (2019) Modern fuzzy min max neural networks for pattern classification. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohammad Falah, Mohammad).

Al Yaqoobi, Zainab Mohammed Bati (2017) The differential effects of pronunciation teaching methods of consonant sounds /p/ and /ʧ/ among Omani EFL learners. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Al-Bashiri, Hael Abdullah Hussein (2019) A proposed memory-based collaborative filtering technique based on a new similarity and MADM methods (CF-NSMA) for improving the recommendation accuracy. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdulgabber, Mansoor Abdullateef).

Al-Diabat Al-Btoush, Mohammad (2018) Systematic approach and strategies for building information modelling (BIM) adoption in the Jordanian construction industry. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Al-Emran, Mostafa Nadhir Hassan (2019) Extending the technology acceptance model with knowledge management factors to examine the acceptance of mobile learning. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Al-Haimi, Basheer Mohammed Mohammed (2019) Strategies for building world-class universities in Yemen with specific reference to the Malaysian experience. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Al-Hasani, Ban Hikmat Qasim (2018) Assessment of physicochemical and bilogical properties of harvested rainwater in Gambang area and removal of contaminants using sodium hypochlorite. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abd. Razak, Abdul Syukor).

Al-Hashem, Hassan Dhiaaldeen Mahammed (2017) Drag reduction in ducts using structured internal surfaces. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Al-Hroob, Essam Muslem Harb (2020) Flexible enhanced fuzzy min–max neural network model for pattern classification problems. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Al-Sharafi, Mohammed Abdullah Ali (2020) An integrated model for continuance use of cloud computing services towards SMEs organizational performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah Arshah, Ruzaini).

Al-Shetwi, Ali Qasem Saleh (2019) Design and control of large-scale grid-connected photovoltaic power plant with fault ride-through. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sujod, Muhamad Zahim).

Al-Zarqawee, Aws Naser (2018) A classifier mechanism for host based intrusion detection and prevention system in cloud computing environment. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Fadli, Zolkipli).

Alaa Mashjel, Ali (2015) Synthesis of novel high performance Polyurethane nanocomposites from castor oil as renewable Polyol : study on mechanical, thermal and barrier properties. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Alaaddin Rassem, Hesham Hussein (2020) Extraction of bioactive compounds from hibiscus and jasmine flowers using microwaveassisted hydrodistillation (MAHD) and hydrodistillation (HD) methods. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Alagorni, Abubaker Hamza (2019) Experimental performance of selective simultaneous water alternating nitrogen (SSWAG-N2) technique for oil recovery in sandstone and carbonate. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Alazaiza, Motasem Y D (2017) Contaminant fate and transport in double-porosity soil medium using light transmission visualization technique. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ngien, Su Kong).

Ala’a Atallah, Hamad Alomoush (2020) Hybrid harmony search algorithm for continuous optimization problems. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Albashir, Walid Ali (2019) A study on determinants of adopting Islamic banking products in Libya: the role of customer involvement and perceived usefulness as mediator. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zainuddin, Yuserrie).

Alghail, Adnan Ali Mohammed (2019) A novel project management maturity model by integrating knowledge management capabilities : empirical evidence from institutions of higher education in Yemen. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Liu, Yao).

Ali, A. J. Adham (2012) An integrated model for production line balancing planning. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ali, Ahmed Mahmood (2019) Design of optimal nanoscale channel dimensions of FinFET based on constituent semiconductor materials. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Shaif Abdullah, Waheb Abdul Jabbar).

Ali, Jamshid (2020) Impact of learning and forgetting factors on organizational learning effectiveness with the moderation of information system and mobile technology. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ali, Md Jahan (2018) Modified CSMA/CA MAC strategy for IOT enable intra-vehicular wireless communication systems. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md Arafatur, Rahman).

Ali, Mohammed Hasan (2019) A fast learning network with improved particle swarm optimization for intrusion detection system. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Fadli, Zolkipli).

Ali, Mohammed Rashid (2019) Experimental measurement and prediction of thermophysical properties of methyl tert-butyl ether (MTBE) with methanol, diisopropyl ether (DIPE) and N-methylaniline binary mixtures. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ali, Mushtaq (2018) A model for power efficiency of mobile devices through lightweight method level computational offloading. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Fadli, Zolkipli).

Ali, Obed Majeed (2014) The Influence of additives on biodiesel blend for engine performance and emission improvement. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ali Abdallah, Ali Emhemed (2021) Optimal distributed generation and load shedding scheme using artificial bee colony- hill climbing algorithm considering voltage stability and losses indices. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ali Kareem, Nahar (2016) Enhanced PAPR reduction and channel estimation techniques in multi-carrier wireless communication system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ali Mahmood, Humada (2016) Mathematical modelling and hybrid ACO-PSO technique for PV performance improvement. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mojgan, Hojabri).

Ali Mohammed Omar Salem, Ba Saleem (2023) The effects of spray atomization by using blended alumina oxide, titanium oxide, and cerium oxide nano particles with diesel fuel in direct injection engine. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Rizalman, Mamat).

Ali Muttaleb, Hasan (2022) Knowledge based semantic representation for semantic relatedness measurements. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Taha Hussein, Alaaldeen Rassem).

Alia Aqilah, Ghazali (2020) Development of polyether block amide (PEBAX) nanocomposite membranes using nanoadsorbent from agricultural wastes as fillers for gas separation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aliaa, Zanurin (2023) Characterisation and corrosion evaluation of sol gel alumina-gnp coating on nickel substrate. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Juliawati, Alias).

Alim, Samiul (2019) Development of electrochemical biosensor based on SnO2-nanofiber with enhanced electron transfer of redox biomolecule. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aljbour, Nawzat Deeb (2019) Preparation and characterization of chitosan/poly lactic acid nanofibers using electrospinning process for drug delivery applications. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Alkhateeb, Abdullah Nihad (2019) The impacts of intellectual capital on competitive advantage mediated by organizational performance in selected Malaysia research universities. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Amalina Hanani, Ismail (2019) Pozzolanic reactivity of chemically pre-treated palm oil clinker powder (POCP) with hydrochloric acid. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Amanina Farhana, Ahmad (2017) The effects of waste polyethylene terephthalate as an aggregate coating on the properties of bituminous mixture for road making. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ambarwati, Dessy (2011) Characterization and process optimization of Melastoma malabathricum l. extract. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Munaim, Mimi Sakinah).

Ameen Ali, Mohammed Ba Homaid (2022) A hybrid kidney algorithm strategy for combinatorial interaction testing problem. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahman Ahmed, Mohammed Al-Sewari).

Aminatul Sobirah, Zahari (2022) Effect of molecular weight on Piezoelectric properties of electrospun polyvinylidene fluoride blended with cellulose nanocrystals. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Hafiz, Mazwir).

Amir Izzani, Mohamed (2013) Space charge behavior in polymeric insulating materials under DC stress and pre-breakdown phenomena. PhD thesis, Ehime University JAPAN (Contributors, UNSPECIFIED: UNSPECIFIED).

Amir Luqman, Sanusi (2023) Effect of organic linkers and graphene loading on ternary metal organic framework composite for asymmetric supercapacitor application. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Izan Izwan, Misnon).

Amira Alia, Zulkifli (2020) Isolation of kistomin milk coagulant from calloselasma rhodostoma venom. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jaya Vejayan, A/l Palliah).

Amirah, Izam (2012) Solid-liquid extraction of hydrolysable tannin (galic acid) from stem bark of Jatropha Curcas using various type of extraction. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: D.M. Reddy, Prasad).

Amirah, Ya'acob (2022) Study on the microbial growth inhibition by using pineapple leaves juice. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazwina, Zainol).

Amiril, S. A.S. (2018) Study on the application of ionic liquids in bio-based lubricant for a sustainable machining process. Masters thesis, Universiti Tun Hussein Onn Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Amiril Sahab, Abdul Sani (2014) Pressure gradient and geometrical variation of the abrasive blocks during the polishing process of ceramic tiles with line contact. Masters thesis, University of Kaiserslautern (Contributors, UNSPECIFIED: UNSPECIFIED).

Amirruddin, Abdul Kadir (2019) Tribological performance analysis of nanocellulose-AL2O3-engine oil. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Amirul Edham, Roslee (2017) Evaluation of heat capacity of CdSe quantum dots using DFT calculations. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Amirul Hakim, Sufian (2023) Traction behaviour analysis on aged rubber using lab-scale environment simulated system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Shahir, Jamaluddin).

Amri Muaz, Azmimurad (2019) The relationship between technical vocabulary breadth, english language proficiency, and vocabulary learning strategies among engineering undergraduates at Universiti Malaysia Pahang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Anas Ayed, Sharif Ibrahim (2020) Analysis of power losses and Lifetime for the inverter in electric Vehicles using variable voltage Control and variable switching Frequency modified pwm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sujod, Muhamad Zahim).

Anas Mohamad Husian, Kassim (2017) Shear strength of soft clay reinforced with polypropylene column. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Anat Anaqie, Zahidy (2021) Critical success factors for corporate social responsibility adoption in the Malaysian construction sector: a delphi study. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad, Fazeeda).

Andalib, Tarnima Warda (2018) A study on convergence of international employee rights within human resources management practices in Bangladesh. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Darun, Mohd. Ridzuan).

Ang, Fuk Chen (2021) Evaluation of combustion characteristics, performance and exhaust emission for diesel fuel with various type nano particle blends. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Anis Sakinah, Zainal Abidin (2018) Surface modification of graphene nanofillers to improve the thermal and mechanical properties of polybutylene succinate-graphene nanocomposites. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Anisha Banu, Dawood Gani (2022) Determinants and practices towards cyber supply chain performance with cyber supply chain visibility as a mediator. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Yudi, Fernando).

Anita, Abdul Rani (2015) Influence of spiritual intelligence, age and tenure on work performance of nurses in selected hospitals, Peninsular Malaysia. UNSPECIFIED thesis, Universiti Putra Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Annie, Lau Sheng (2020) Thermal fatigue of laser modified tool steels mould surface at high temperature. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ansha, Richard Hannis (2016) Adoption of lean tools to control delays in Malaysian construction projects. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: UNSPECIFIED).

Anuj, Kumar (2013) Influence of nanofillers on the properties of urea formaldehyde resin and medium density fiberboard. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Anusuiah, Vasu (2021) Investigation on cyclic degradation of thermophysical properties of paraffin wax as a phase change material and their impact on heat storage performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ftwi Yohaness, Hagos).

Anwar, P. P. Abdul Majeed (2018) Hardware-in-the-loop study of a hybrid active force control scheme of an upper-limb exoskeleton for passive stroke rehabilitation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Anwar, P. P. Abdul Majeed (2018) Hardware-in-the-loop study of a hybrid active force control scheme of an upper-limb exoskeleton for passive stroke rehabilitation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Anwar, Shahid (2019) An enhanced android botnet detection approach using feature refinement. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zolkipli, Mohamad Fadli).

Anwar Ilmar, Ramadhan (2023) Characterization, experimental and simulation of heat transfer performance for Al2O3-TiO2-SiO2 ternary nanofluid with inserts. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Azmi, Wan Hamzah).

Anwaruddin, Hisyam (2012) Design and operation of multivessel batch distillation. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Mohd Yunus).

Aqeel Sakhy, Jaber (2014) Hybrid intelligent methods for parameter identification and load frequency control in power system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Arafat, Md Yasir (2017) Source apportionment and pollution loading in Lake Chini watershed using multivariate statistical analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ariff Nijay, Ramli (2023) Optimization of assembly line balancing with energy efficiency by using tiki-taka algorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Abd Rashid).

Artika Rasul, Sulaiman (2020) Tahap kesediaan guru pendidikan Islam dalam pentaksiran bagi dokumen standard kurikulum dan pentaksiran. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Arwa Mukhtar, Makki Kanani (2022) The enhanced model of hyperledger composer supply chain (hcsc) for the product environmental in supply chain networks. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Awanis, Romli).

Asdarina, Yahya (2011) Kajian terhadap pelbagai teknik pengekstrakan minyak pati dari tanaman nilam (pogostemon cablin benth). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Mohd Yunus).

Ashwin Charles, Benedict (2014) Investigating drag reduction using turbolence altering pseudo-surface (TAPS). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ashwinder, Chelliah (2019) Production and characterization of degradable polyethelene terephthalete using pro-degradant additives, polylactic acid and polylactic acid grafted maleic anhydride. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ashwindran, Naidu Sandersagran (2020) Transient analysis of bio-inspired vertical axis wind turbine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ashwindran Naidu, Sanderasagran (2023) An investigation of sqrt 2 conjecture inspired drag induced vertical axis wind turbine blade. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Azizuddin, Abd Aziz).

Asiah, Kassim (2014) Differential effects of corrective feedback on the ESL learners' accuracy of linguistic form. PhD thesis, Universiti of Malaya (Contributors, UNSPECIFIED: UNSPECIFIED).

Asim, Zeeshan (2019) Developing framework for capabilities related to supporting management discipline that contributes to r&d in public organizations of Pakistan. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sorooshian, Shahryar).

Asmadi, Ali @ Mahmud (2013) Synthesis, Characterizationa Performance of Polysulfone/Cellulose Acetate Phthalate/ Polyvinylpyrrolidone (Psf/CAP/PVP) Blend Ultrafiltration Membranes. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Asmawati, Sajari (2019) The quality of chief integrity officer and ethical climate on the level of ethics and integrity and its relationship with organizational commitment : the case of federal government sector. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Asmida, Ideris (2014) Carbon formation inhibition in solid oxide fuel cells (SOFCs) using H2S. PhD thesis, University of Waterloo (Contributors, UNSPECIFIED: UNSPECIFIED).

Asnul Hadi, Ahmad (2015) Effect of temporal thermal field on quality of semi-solid metal formed components. PhD thesis, Dublin City University (Contributors, UNSPECIFIED: UNSPECIFIED).

Asri Syahmi, Asnor (2022) Successful implementation of erosion and sedimentation control plan for reducing environmental impact in the construction industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahimi, Abdul Rahman).

At-Tasneem, Mohd Amin (2012) A study on the applicability of symbolic computation in stabilising control design for switched systems. Masters thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Atik, Faysal (2022) Noise eliminated ensemble empirical mode decomposition scalogram analysis for rotating machinery fault diagnosis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ngui Wai, Keng).

Atta, Mohammed Thamir (2019) The effect of usability and information quality on Malaysian user’s satisfaction of student information systems in higher education institutions. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Atyaf Khalid Hammed, Al-Dahan (2017) Preparation and characterization of supported nano-zero valent iron for treatment of organic pollutants in water. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aufa Huda, Muhammad Zin (2018) Early detection of high water saturation spots for landslide prediction using thermal image analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Auni Hamimi, Idris (2015) Incorporating energy generation process in environmental assessment of a biopharmaceutical process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Awad, Omar Ibraheem (2018) The effects of fusel oil water content reduction on performance and emissions of SI engine with fusel oil – gasoline blended fuel. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Awang, Idris (2009) Effect of compressed natural gas on performance and emission of a 4-stroke spark ignition engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Awanis, Romli (2015) Integrated eco-design decision making for sustainable product design. PhD thesis, Cardiff University (Contributors, UNSPECIFIED: UNSPECIFIED).

Ayesha, Noor (2020) Consequences of job embeddedness and the mediating role of continuance commitment on intention to stay in Malaysian Information and Communication Technology Industry. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zainuddin, Yuserrie).

Ayib Rosdi, Zainun (2012) Characterization of tmed-copper (I) iodide (Cul) thin film and performance for solid state dye sensitized solar cell applications. PhD thesis, Universiti Teknologi Mara (Contributors, Thesis advisor: Mohamad Rusop, Mahmood).

Azad, Othman (2013) Tahap pengetahuan, kefahaman, sikap dan amalan terhadap keselamatan di organisasi pendidikan. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Ibrahim).

Azamuddin, Ab. Rahman (2021) Energy efficient in cluster head and relay node selection for wireless sensor networks. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Nizam, Mohammad Kahar).

Azhar, Fakharuddin (2015) A dye – sensitized solar cell module with enhanced charge collection efficiency. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Azharin Shah, Abd Aziz (2017) Development of water adsorbent from spent bleaching earth for dehydration of azeotrope ethanol- water mixture. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Azian, Ibrahim (2023) The impact of low carbon warehouse practices on operational excellence : the mediating impact of green innovation capabilities. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Yudi, Fernando).

Aziz Zaid, Aziz Qannaf (2020) Moringa oleifera seed derivatives as natural bio-coagulants in water treatment process. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Suriati, Ghazali).

Azizuddin, Abd Aziz (2014) Air-conditioning system with simultaneous control of sensible and latent heat for building energy conservation in Malaysia. PhD thesis, Kyushu University (Contributors, UNSPECIFIED: UNSPECIFIED).

Azizul Helmi, Sofian (2014) Corrosion protection of zinc rich paint coating on steels. PhD thesis, Shibaura Institute of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Azizul Qayyum, Basri (2021) Integrated single minute exchange of die (ismed) approach to improve tandem press line operation output in automotive industry. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Azlan, Abd Rahman (2020) Hubungan program pengimarahan masjid dengan pembangunan modal insan dalam kalangan masyarakat: kajian di daerah Pekan, Pahang. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Azmi, W. H. (2015) Heat transfer augmentation of water based TIO2 AND SIO2 nanofluids in a tube with twisted tape. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aznizan, Shaari (2014) Synthesis and characterization of bionanocomposite silver nanoparticles (AgNPs)-chitosan/polylactic acid (PLA) biofilm. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Azri, Alias (2013) Evaluation of various estimation equations for particle-fluid interaction forces and modeling of heat transfer between particles for dem simulations. PhD thesis, Okayama University of Science (Contributors, UNSPECIFIED: UNSPECIFIED).

Azrizulazmi, Bustan (2022) The impacts of the university policies during covid-19 pandemic towards academic operation, financial, facilities and staff operation in universiti malaysia pahang: A dematel based model. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Lee, Chia Kuang).

Azrulrizawati, Abd Hamid (2013) Characterisation and Biological Activities of Tinospora Crispa (Menispermaceae) Extract with Emphasis on Alkaloids. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Yusof, Mashitah).

Azwin, Ahmad (2019) The roles of xanthan gum, potato starch, and sorbitol in the formulation of gluten free bread. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Azyyati, Johari (2012) An approach to market biofuel from waste castor bean shell. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: GHAZI FAISAL, NAJMULDEEN).

B

Baarath, Kunjunni (2020) Effect of unbalanced overloading on the cornering stability profile of nonholonomic two in-wheel compact electric vehicle. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Baarimah, Abdullah Omar Obaid (2019) Structural behaviour of fibers as part of shear reinforcement in reinforced concrete slab. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Babu Arigela, Sri Satya Veerendra (2022) Hybrid power management for fuel cell-supercapacitor powered hybrid electric vehicle. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rusllim, Mohamed).

Bagaber, Salem Salah Abdullah (2019) Energy and cost integration model for multi-objective optimisation in turning process of stainless steel 316. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Bahari, Mohamed (2015) The effects of perceived service quality on patient satisfaction and behavioral compliance at a multi speciality public hospital in state of Pahang. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Bahrun, Mohd Shakir (2013) Production of Modified Cassava Flour (MOCAF). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Bakiss Hiyana, Abu Bakar (2022) A solution to finite escape time in H∞ filter slam. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Hamzah).

Bakr, Zinab Hassanien Hassanien (2019) Synthesis and characterization of tin based hybrid nanofibers and nanoflowers as photoelectrode in dye-sensitized solar cells. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Baranitharan, E. (2014) The Potentiality of microbial fuel cell anode with enhanced electron transfer. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Baridula, Ravinder Reddy (2018) Effect of deposition of nanoparticles during joining of dissimilar metals by friction stir welding. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Basem Saeid, M Elarbe (2023) Novel pour point depressant (PPD) copolymer synthesis, characterization, and performance evaluation for wax deposition inhibition of malaysian crude oil. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norida, Ridzuan).

Basheer, Esmail Abdullah Mohammed (2016) Investigating the effect of design parameters on the performance of microfluidics electrochemical biosensor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Basma Yahya Muaydh, Ahmed Alashwal (2022) Synthesis, characterization and optimization of chicken feather-based keratin biopolymers. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Arun, Gupta).

Bastian Wibar, Momang (2017) Development of portable checking fixture device for automotive quality-confirmation inspection. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Batool, Tahira (2016) Production of microbial L-asparaginase. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Beg, Abul Hashem (2011) Adaptive persistence layer for synchronous replication (PLSR) in heterogeneous system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noraziah, Ahmad).

Beh, Khi Khim (2016) Process development of the device using in-house plate-to-plate tool with nanoimprint lithography technique for biochip application. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Bello, Ibrahim Garko (2013) Development of new green demulsifier composition for oil production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Benedict, Ashwin Charles (2020) Synthesis of calcium ferrite photocatalyst for the COD photodegradation of palm oil mill effluent under visible light. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Benedict Foo, Jing Siong (2020) Hybrid-inspired coolant additive for radiator application. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Benjunior, Bindamin (2021) Characterization of wrought aluminium feedstock billet produced by semisolid metal processing route. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Asnul Hadi).

Benraghda, Abdelmadjid (2019) Self-assessment throughvideo-recorded speech rehearsals in delivering technical oral presentation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Benraghda, Abdelmadjid (2016) A correlational study between attitudes and oral presentation performance among undergraduates in Universiti Malaysia Pahang (UMP). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zuraina, Ali).

Beny, Cahyono (2015) Effects of swirl at intake manifold on engine performance using ethanol fuel blend. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Bryan Andrew, Balasan (2021) Comparative study of bi-2223 synthesised via electrospinning and coprecipitation methods. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mazwir, Muhammad Hafiz).

Budi, Wiyarno (2012) A study on the ultrasonic oil extraction and in situ transestrification of microalgae biodiesel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Mohd Yunus).

C

Chahal, Sugandha (2016) Electrospun hydroxyethyl cellulose nanofibrous scaffolds functionalized with hydroxyapatite for bone tissue engineering. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Chan, Chung Hoong (2018) Intuitive content management system via manipulation and duplication with if-else rules classification. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Chan, Hwee Geem (2019) Investigation on the occurrence of tles associated positive cloud to ground (+CG) lightning in UMP Pekan. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Amir Izzani, Mohamed).

Chan, Shi Jing (2018) Hybrid fault detection using kalman filter and neural network for quadrotor micro aerial vehicle. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Chang, Ling Shing (2022) Solving ump examination timetabling problem using dynamic exploration step counting hill climbing algorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Nizam, Mohmad Kahar).

Chang, Tai Ann (2016) Development and analysis of direct current low energy micro-sheet-forming machine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Che Dini Marini, Che Mohammad Ishkandar El-Rahimin (2020) Investigation of surface metal matrix composites of reinforced aluminium alloy produced using friction stir processing. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Che Ku Eddy Nizwan, Che Ku Husin (2022) Establishment of spectral subtraction-based algorithm for experimental modal analysis under operating condition. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fairusham, Ghazali).

Che Mohammad Nizam, Che Kamaruddin (2019) Effects of environmental ergonomic factors towards muscles activities for lifting task. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Che Wan Mohd Noor, Che Wan Othman (2019) Experimental and prediction model of low compression marine diesel engine fuelled with palm biodiesel blends. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Cheng, C. K. (2011) Synthesis gas production from glycerol steam reforming over alumina supported bimetallic Co-Ni catalyst. PhD thesis, The University of New South Wales Sydney Australia (Contributors, UNSPECIFIED: UNSPECIFIED).

Cheng, Yoke Wang (2019) Hydrogen-rich syngas production from steam reforming of palm oil mill effluent (POME) over LaNiO3 & LaCoO3 catalysts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Cheok, Jia Wei (2023) Seismic performance of high-rise building under different excitation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Saffuan, Wan Ahmad).

Chia, Vi Vien (2017) Production of L-asparaginase through biodegradation of chicken bone wastes. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Chilakamarry, Chaitanya Reddy (2022) Optimization of solid state fermentation parameters for bioethanol production from waste glycerol using immobilized escherichia coli. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Chong, Beng Wei (2021) Properties of concrete incorporating eggshell as partial cement replacement with tire crumb as sand replacement. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rokiah, Othman).

Chong, Soo Ling (2017) Preparation and characterization of H3PO4-modified cerium oxide catalysts for ethylene production from ethanol dehydration. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Choong, Chun Sern (2020) Automatic detection and indication of pallet-level tagging from rfid readings using machine learning algorithms. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ab. Nasir, Ahmad Fakhri).

D

D., Ramasamy (2015) Improvement of in cylinder airflow using dissimilar valve lift in a compressed natural gas bi-fuel engine. PhD thesis, Universiti Sains Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

D., Ramasamy and Mahendran, Samykano and K., Kadirgama and Lee, Giok Chui and M. M., Noor and Mahdhir, Mohd Yusof (2010) Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method = membangunkan pam mikro untuk penggunaan sel bahan api menggunakan sistem mikro elektro-mechanical (MEMS). Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Daing Mohamad Nafiz, Daing Idris (2014) Fundamental study on bending strength on thin-rimmed helical gears with web arrangements. PhD thesis, Tottori University (Contributors, UNSPECIFIED: UNSPECIFIED).

Damhuji, Rifai (2017) Response surface and neuro fuzzy methodology for rotating magnetic field and GMR array sensor for crack detection in ferromagnetic pipe. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Das, Debashish (2019) An ensemble of neural network and modified grey wolf optimizer for stock prediction. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sadiq, Ali Safaa).

Dayang Siti Hazimmah, Ali (2015) Investigation on the properties of acrylic emulsion polymer based ordinary portland cement concrete reinforced with hooked steel fiber. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Khairunisa, Muthusamy).

Dayangku Noorfazidah, Awang Sh'ri (2009) Effect of surface pretreatments on the deposition of polycrystalline diamond on silicon nitride substrates using hot filament chemical vapor deposition method. Masters thesis, Universiti Teknologi Malaysia (Contributors, Thesis advisor: HAMZAH., ESAH).

Dayangku Noorfazidah, Awang Sh'ri (2014) Surface characterization and biocomatibility of nanostructured TiNi alloys processed by high-pressure torsion. PhD thesis, University of Tsukuba (Contributors, UNSPECIFIED: UNSPECIFIED).

Din, Fakhrud (2019) A fuzzy adaptive teaching learning-based optimization strategy for generating mixed strength t-way test suites. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kamal Zuhairi, ZamlI).

Ding, Gong Tao (2011) The optimisation and scale-up of microalgae cultivation for high level oil content for biodiesel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Diyana, Kamarudin (2015) Comparing online and traditional interview techniques : a qualitative study of the experiences of researchers and participants in the Malaysian context. PhD thesis, Western Michigan University (Contributors, UNSPECIFIED: UNSPECIFIED).

Dokala Janandra, Krishna Kishore (2024) A new teaching learning artificial bee colony based maximum power point tracking approach for assessing various parameters of photovoltaic system under different atmospheric conditions. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Rusllim, Mohamed).

Dong, Kangxing (2023) Effects of online reading strategy instruction on reading comprehension, strategy use and affective attributes of tertiary ESL learners. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hafizoah, Kassim).

Durrani Aimi, Abdul Malik (2022) Hybrid fuzzy analytical hierarchy process with fuzzy inference system on ranking stem approach towards blended learning in mathematics. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Yuhani, Yusof).

Dzulaika Nubaillah, Noor (2019) Techno-economic analysis in optimisation of hybrid air-conditioning system combining chilled water storage and solar water heater. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Dzulqarnain, Abu Bakar (2017) Improvising the integral approach model to address OSHMS leadership challenges at a Malaysian pipe coating facility. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

E

Egbal Hassan, Altoum Mohammed (2015) Methane production from sewage sludge treatment by ultrasonicated membrane anaerobic system (UMAS). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdurahman, Hamid Nour).

Elfira, Anuar (2019) Thin film composite hollow fiber membrane for separation in biorefinery. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Elghool, Ali Elhade (2020) Experimental study and optimization on thermoelectric generator combined with heat pipe-heat sink. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Elnaz, Yousefi (2024) Nano enhanced phase change material properties driven by artificial intelligence method. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Farzad, Jaliliantabar).

Elrasheed Ismail, Sultan (2013) Quantum Particle Swarm Optimization Technique for Load Balancing in Cloud Computing. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Eman Noori, Ali (2002) Sampling and analysis of volatile organic compounds in ambient air in Malaysia. Masters thesis, Universiti Kebangsaan Malaysia (Contributors, Thesis advisor: Abdul Amir Hassan, Kadhum).

Emine, Seydametova (2013) Production of Pravastatin by Filamentous Fungi Isolated from Soil. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Emsalem, Faraj Hawege (2016) Performance investigation of water-soluble additives for drag reduction agent in pipelines. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Emyra Ezzaty, Masiren (2017) Molecular dynamic simulation of amine-based absorption process for co2 capture. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noorlisa, Harun).

Engku Nadia, Engku Mat Nasir (2022) Crystal size distribution characterisation of Carbamazepine-saccharin co-crystal in batch cooling crystallisation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah, Abd Rahim).

Engku Norfatima, Engku Dahalan (2019) Enhance formulation of organic coating for barrier protection of mild steel upon corrosive environment. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Epin, Vorathin (2021) Accuracy improvement of rubber-based diaphragm fibre bragg grating pressure sensors. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Hafizi, Zohari,).

Erliza, Serri (2017) A short predictive Model Predictive Control (MPC) approach for hybrid characteristics analysis in DC-DC converter. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Abu Zaharin).

Erna Wati, Hajar (2013) Identification and characterization of stevia rebaudiana extraction for total phenolic compound using soxhlet extraction and microwave-assisted extraction techniques. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Erny Afiza, Alias (2016) Clarification of anatomical structure and functions in human nasal cavity by airflow patterns. PhD thesis, Tokai University (Contributors, Thesis advisor: Takakura).

Erny Afiza, Alias (2012) Skin friction reduction by micro bubbles in pipe flow. Masters thesis, Tokai University (Contributors, UNSPECIFIED: UNSPECIFIED).

Erny Haslina, Abd Latib (2023) Characterisation of Malaysia agarwood oil (aquilaria sp.) and comparison with different origins based on sensory studies. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Saiful Nizam, Tajuddin).

Esmail Abdullah, Mohammed Basheer (2021) Development of hybrid microfluidics chip for water desalination and purification. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Etdal, Bakhiet (2021) Biomineralization of hydroxyethyl cellulose/sodium alginate impregnated with cellulose nanocrystals by using surface modification technique. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zulkifli, Farah Hanani).

F

F. R. M., Romlay (2013) Increasing performance of rotary ultrasonic motor through stator modification. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fadhlyya Arawaney, Abdul Ghani (2021) Mathematical model for wave impact on vertical wall with multiple bottom-mounted baffles. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nor Aida Zuraimi, Md Noar).

Fadzil, Mat Yahaya (2015) Effects of by-product materials (POFA and PFA) as partial cement replacement on concretetowards corrosion reisitance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Faeiz Azizi, Adnan (2019) Contour generation for mask projection stereolithography 3D printing. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Romlay, Fadhlur Rahman).

Fahad, Qaswar (2023) General ontology for internet of things (goiot) to achieve semantic interoperability using sensor, observation, sample and actuator (sosa) approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rahmah, Mokhtar).

Faiqah Masturina, Abd Aziz (2022) Drivers and barriers of project management practices in logistic industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Lee, Chin Kuang).

Faisal Abdullah, Sakhar Al Amry (2016) A risk assessment study on electronic voting system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Cheng, Jack Kie).

Faiz, Mohd Turan (2013) A three-stage methodology for design evaluation in product development. PhD thesis, Universiti Tun Hussein Onn (Contributors, UNSPECIFIED: UNSPECIFIED).

Fakhira Fathini, Mohd Khudzari (2023) Influencing factors of decision-making for emerging technologies adoption in the construction industry. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Abdul Rahimi, Abdul Rahman).

Fakhrulddin, Sarmad Kamal (2018) Flow enhancement using structured physical-chemically interacted polymer surfactant complex. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fakhrur Razil Alawi, Abdul Wahid (2019) Characterization and application of torrefied Malaysia biomass as a biofuel for gasification. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Saleh, Suriyati).

Farah Adiba, Azman (2019) Camera geometry determination based on circular's shape for peg-in-hole task. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daud, Mohd. Razali).

Farah Alia, Fauzi (2018) Pack cementation of high chromium steel for high temperature application in steam condition. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Farah Amira, Mohd Ghazali (2017) Design of a thermoforming process for a semi-crystalline polymer. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jaafar, Abdul Aziz).

Farah Ayuni, Fauzi (2018) Development of hybrid natural/synthetic fiber reinforced polymer composite of recurve bow riser for Malaysian junior athletes. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Farah Fazira, Kamaruzaman (2020) Preparation and characterization of al-al2o3 graded composite materials under different sintering conditions. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Farah Hanani, Zulkifli (2015) Biomimetic scaffolds based on hydroxyethyl cellulose for skin tissue engineering. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jahir Hussain, Fathiima Shahitha).

Faraj, Moneer A (2019) Enhancement of eddy current testing probe for crack detection and lift-off compensation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Farhana, Kaniz (2019) Design and development of highly efficient nano fluidic flat plate solar collector. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kadirgama, Kumaran).

Farhana, Sultana Toma (2023) Separation and modification of lignin from oil palm empty fruit bunch and its application as a phenolic lignin adhesive in wood composites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zulkifly, Jemaat).

Faridah, Kormin (2013) Temperature controlled microwave closed system for extraction of bioactive compound from Epiphyte's fern. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Mohd Yunus).

Faridah, Taju Rahim (2020) The impact of technological innovation Capabilities on competitive advantage And firm performance : an empirical Study in the automotive industry In Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Farouq, Ahmat (2019) Effect of leaching reagent on leaching process of europium, terbium and yttrium from liquid crystal display. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Faten, Ahmad Al-Btoush (2021) Effective strategies dealing with construction cost overruns: a study in Jordan. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Faten Ahada, Mohd Azli (2023) Removal of total suspended solid (tss) and chemical oxygen demand (cod) in oleochemical wastewater using electrocoagulation treatment. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Aziz, Mohd Azoddein).

Fatimah, Abdul Rashid (2021) Kesediaan dan kepenggunaan virtual learning environment dalam pengajaran dan pembelajaran di negeri Pahang. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Hilmi, Mat Said).

Fatimah, Dzaharudin (2014) Numerical study of the dynamics of microbubble clusters in ultrasonic fields. PhD thesis, The University of Melbourne (Contributors, UNSPECIFIED: UNSPECIFIED).

Fatimah Azzahra’, Misebah (2017) Kinetics of biolubricant synthesis from jatropha curcas oil using Paphia undulata as a solid catalyst. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ir. Said, Nurdin).

Fatin Farisha Alia, Azmi (2023) Theoretical and experimental investigations of zinc oxide nanostructures as photoelectrode for solar cell application. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Saifful Kamaluddin, Muzakir@Lokman).

Fatin Syazwana, Hashim (2017) Production of renewable glucose from oil palm frond bagasse by using sacchariseb C6 through enzymatic hydrolysis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fatin Zafirah, Mansur (2020) Performance study on co-gasification of coal with sawdust and sawdust pellet in downdraft gasifier. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fatinah, Ab Rahman (2020) Evaluation of solid form and thermodynamic properties for carbamazepine-saccharin (CBZ-SAC) co-crystal. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fatma, Ali Lghzeel (2021) The cross-linguistic influence of arabic on the english passive voice. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fauziah, Zainuddin (2019) Framework of informal specification validation with visual specification and human factor involvement to improve requirement specification quality. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fayaz, Fahim (2019) Syngas production from ethanol dry reforming over La and Ce promoted Co/Al2O3 catalysts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fazal, Muhammad Ishtiaq (2019) Investigating the role of student teams-achievement divisions (STAD) on Saudi undergraguates’ motivation and vocabulary. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fazilah, Abdul Aziz (2021) Analytic hierarchy process and knowledge-based system integration for web-based ergonomics assessment approach in prioritizing workplace critical risk factors. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nik Mohamed, Nik Mohd Zuki).

Fazliana, Fauzun (2015) Experimental and statistical analysis for surface modification of steel and cast iron using Nd:yag laser. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fazliana, Fauzun (2021) Laser cladding of tool steel for grain boundary stability. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah Nur Aqida, Syed Ahmad).

Filzah Lina, Mohd Safeiee (2023) Integration of Mahalanobis-Taguchi system and time-driven activity-based costing in production environment. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Yazid, Abu).

Florence Sia, Fui Sze (2014) Optimized feature construction methods for data summarization methods for data summarization of relational data. Masters thesis, Universiti Malaysia Sabah (Contributors, UNSPECIFIED: UNSPECIFIED).

Foo, Kathleen (2020) Effect of feed spacer size and mesh length on permeate flux enhancement driven by forced slip velocity. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Freida, Ayodele Ozavize (2018) Accounting knowledge management capabilities, accounting functional effectiveness and overall university performance : evidence from Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Liu, Yao).

G

Gabar, Salah Masoud Saleh Gabar (2019) Study on water and soil quality source apportionment of pollution loading and community engagement for integrated catchment management of Gebeng Industrial Estate, Pahang, Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gamil Abdulraqeb, Abdullah Saeed (2021) Development of parametric model for ungrouped and grouped line transect data. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gan, Leong Ming (2012) Development of dish-stirling concentrating solar thermal-electric energy conversion system /. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gan, Leong Ming (2012) Development of dish-stirling concentrating solar thermal-electric energy conversion system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gan, Siew Mei (2015) Azobenzene-liquid crystal composite for fabrication of optical storage devices. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hegde, Gurumurthy).

Ganesan, Kadirgama (2018) Thermophysical evaluation of nanocellulose as a new coolant for radiator. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Geoffrey, Ogadimma Asiegbu (2013) Defect detection on electrical power equipment using thermal imaging technology. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daud, Mohd Razali).

Geraldine Chan, Sue Ching (2016) Development of a graphene based immuno-biosensor for hepatitis b virus surface antigen detection. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ghassan, Maan Salim (2022) Optical goniometer device for continuous monitoring of the knee movement in physiotherapy application. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Anwar, Zawawi).

Gisen, J. I. A. (2015) Prediction in ungauged estuaries. PhD thesis, Delft University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Goh, Ming Qian (2021) Adaptive fuzzy proportional-integral-derivative control for micro aerial vehicle. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Owl, Pebrianti).

Gomaa Abdelgawad, Mohammed Ali (2015) Preparation and characterization of manganese-based and carbon-based nanomaterials for supercapasitors application. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gran, Badshah (2016) Watermarking of single and multi frame ultrasound medical images. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

H

Habeeb, Omar Abed (2018) Adsorption of hydrogen sulfide from simulated waste water using locally –sourced adsorbents. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ramesh, K).

Hadi, Abdul Salaam (2020) Development of sustainability performance model for turning process by using neural network model. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hadi, Arkan Jasim (2013) Reconditioning of waste polyolefin using dissolution/re- precipitation technique : a characterisation and modelling. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ghazi Faisal, Najmuldeen).

Hadiwidodo, Yoyok Setyo (2013) Smooth support vector regression (SSVR) modelling of self-compacting concrete properties. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sabaruddin, Mohamad).

Hafizoah, Kassim (2011) The impact of using a multimedia learning tool on mechanical engineering students' creativity. PhD thesis, La Trobe University, Melbourne, Australia (Contributors, UNSPECIFIED: UNSPECIFIED).

Hai, Jing (2011) Dynamic analysis of photovoltaic/wind turbine hybrid micro-grid energy system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hajar Fauzan, Ahmad (2013) Evaluation of interferon gamma release assay using mycobacterium tuberculosis antigens for diagnosis of pulmonary tuberculosis in BCG vaccinated population of Kelantan, Malaysia. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Halimah, Ab. Rahim (2021) The istihalah (ةلاحتسا ) contention in gelatin issues and potential of halal gelatin alternative from gallus gallus domesticus using novel method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hasan, Ahmad).

Hamad Khudhair, Mohammed (2011) Performance of cocoa husk mucilage as a drag reduction agent in pipes. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hamdan, Daniyal (2004) Study on interoperability problems among CAD/CAM systems in automotive industry. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hammid, Ali Thaeer (2018) Optimization and control of hydro generation scheduling using hybrid firefly algorithm and particle swarm optimization techniques. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hammoudeh, S. Alamri (2020) PMT : opposition based learning technique for enhancing metaheuristic algorithms performance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hamzah, Ahmad (2004) Feasibility study on robot off-line programming and simulation using matlab tools : simmechanics and simulink packages. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hamzeh Taha, Salman Alkasasbeh (2015) Numerical solutions for convective boundary layer flow over a solid sphere of newtonion and non-newtonion fluids. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Zuki, Salleh).

Han, Fengrong (2022) Development an accurate and stable range-free localization scheme for anisotropic wireless sensor networks. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamed Abdelaziz, Izzeldin Ibrahim).

Handrizal, M (2011) An improved algorithm for channel allocation on direct sequence spread spectrum. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Noraziah).

Haneef, Mohd Sabki (2023) Effect of material thickness on Duration, hole characteristics, and drilling mechanism on micro-laser drilling. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Aiman, Mohd Halil).

Haneen Abdul Wahab, Abdul Raheem (2020) A new variant of black hole algorithm based on multi population and levy flight for clustering problem. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdulrahman A., Alsewari).

Hani Taha, Abd Assamad Al Ariqi (2020) Electrical and temperature characterisation of silicon and germanium nanowire transistors based on channel dimensions. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hanis Nadiah, Ruslan (2022) Properties of mortar with natural cockle shell waste as partial sand replacement. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Khairunisa, Muthusamy).

Haque, Ariful (2018) An experimental study of neighbourhood based metaheuristic algorithms for test case generation satisfying the modified condition / decision coverage criterion. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zamli, Kamal Zuhairi).

Haque, Muhammad Ehteshamul (2019) A CFD model development and performance investigation of frost free refrigerator with nanoparticles suspended in the lubricant. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Hardinnawirda, Kahar (2017) Effect of electroless nickel-boron (EN-B) surface finish on solderability of SAC305 and solder joint strength. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hasan, Md Munirul (2019) A collaborative model for post flood activities exploiting an enhanced expanding neighborhood search algorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md Arafatur, Rahman).

Hasan, Mohammad Mehedi (2016) Numerical investigation on combustion, performance and emissions characteristics in homogeneous charge compression ignition engine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hasan, Mohammed Midhat (2017) Design of tool and backing/clamping system for dissimilar friction stir welding of high strength AA7075-T6 AND AA2024-T351 aluminum alloys. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ishak, Mahadzir).

Hasmawani, Hashim (2020) Numerical solution of the stagnation point flow and heat transfer with several effects. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Zuki, Salleh).

Hasmiza, Yaakob (2022) Integrasi pembelajaran sains dan latihan biofeedback dalam meningkatkan prestasi mata pelajaran sains sekolah rendah. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Nubli, Abdul Wahab).

Hasneeza Liza, Zakaria (2020) Elitist hybrid migrating birds optimization and genetic algorithm based strategy for T-way test suite generation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hassan, Md Mahmudul (2018) Investigation of the effect of butanol and ethanol alcohols on the combustion, performance and emission of diesel-biodiesel blends. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hassan Alajmi, Qasim Abdullah (2019) Adoption model for cloud-based E-learning in Omani higher education institutions. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Adzhar, Kamaludin).

Hassan Rahnaward, Ghulami (2015) Partial least squares path modelling of UMP students’ attitudes on statistics achievements. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hassanal, Haris (2019) Fabrication & characterization of biomaterials from hydroxylethyl cellulose sponges coated with hydroxy apatite. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hatem Ahmad, Mohamed Aljaerani (2023) Thermophysical and thermal cyclic behavior of nano-enhanced molten salts for concentrated solar power. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Hayder Baqer, Mahdi (2016) Effect of ambient temperature on the performance of combined cycle power plant with cooling system in a subtropical region. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Haziqatulhanis, Ibrahim (2023) Nanocellulose-based adsorbent from pandan leaves for copper ions removal from wastewater. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazlianie, Sazali).

Hazirah, Ismail (2022) Investigation of quenching heat transfer characteristics in metal oxide nanofluids. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhamad Zuhairi, Sulaiman).

Hazri Dahalan, Md Razip (2021) Determining the voltage sag immunity of ac contactor with field testing in petrochemical plant. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Abu Zaharin).

Hazrulzurina, Suhaimi (2019) Analysis of combustion characteristics, engine performances and exhaust emissions of long-chain alcohol-diesel fuel blends. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).

Hazwani Hawa, Mohammad Sobani (2019) Treatment of palm oil mill effluent using struvite preciptation method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

He, Yu Hai (2013) Direct recovery of papain from papaya juice using expanded bed adsorption chromatography. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Chong, Fui Chin).

Heidarinik, Somaye (2019) Flow enhancement using plant based polymer additives in brain-vessels-like microchannels. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hemin M., Mohyaldeen (2011) Analysis of an automobile suspension arm using the robust design method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rahman, Mustafizur).

Heng, Sheng Guang (2022) Analysis of performance between kinect v1 and kinect v2 for various facial part movements using supervised machine learning techniques. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosdiyana, Samad).

Hernawati, Lahading (2011) Development of chitosan based adsorbent for the removal of residual oil from palm oil mill effluent (POME). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hezelin Elayana, Shaian (2022) Chemical composition of treated agarwood (Aquilaria malaccensis) essential oil. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Saiful Nizam, Tajuddin).

Hii, Kiew Hui (2020) ECG noise reduction technique using antlion (ALO) algorithm for heart rate monitoring devices. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ho, Chia Min (2023) The effect of elevated temperature and heating duration on high strength concrete with steel slag as cement replacement. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Doh, Shu Ing).

Hong, Chi Shein (2016) Production of mesoxalic acid from glycerol oxidation by laccase/2,2,6,6-tetramethylpiperidine-1-oxyl (LACASSE/TEMPO) system : effect of process parameters and kinetic study. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hong, Mee Song (2016) An alternative method to solve combined economic emission dispatch problems using flower pollination algorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Herwan, Sulaiman).

Hossain, Mohammed Anwar (2019) Syngas production from methane dry reforming over CeO2 promoted Ni/CaFe2O4 catalyst. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hudi @ Jahid, Hj Sidek (2022) Pembinaan modul kaedah rawatan refleksologi spiritual islam (RSI) dan penilaian keberkesanannya di pusat rawatan islam manarah. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahyuddin, Ismail).

Huei, Ruey Ong (2012) Optimization and characterization of melamine urea formaldehyde (MUF) based adhesive using natural fillers for plywood. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Prasad, D.M. Reddy).

Hujainah, Fadhl Mohammed Omar (2019) A semi-automated requirements prioritisation technique for scalable requirements with stakeholder quantification and prioritisation. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Bakar, Rohani).

Humaira’, Abdul Latif (2019) Modelling awareness of diabetes mellitus : case study at two public health centres. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rashid, Ab Hamid).

Hussain, Ahmad (2021) The influence of in-service professional development on saudi efl teachers’ professional identity. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hussain Kareem, Khleaf (2015) Electrocardiogram based heart disease diagnosis using artificial intelligence. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hussanan, Abid (2016) Exact solutions for some types of newtonian and non-newtonian fluids. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hussein Abbas, Ali Muhammad (2018) An efficient CSMA/CA protocol for IEEE 802.11. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rahman, Md. Arafatur).

Hussein Mahmood, Hamada (2021) Effect of ultrafine palm oil fuel ash and palm oil clinker on lightweight aggregate concrete. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hussein Mahmood, Hamada (2017) Evaluation of bim implementation requirements affecting iraqi construction firms. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hybat Salih, Mohamed Abdlrhman (2021) Characterization and optimization of the performance of an integrated ultrasonic membrane anaerobic (IUMAS) in treating pome as substrate. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hamid Nour, Abdurahman).

I

Ibrahim Moh'd Abdel, Qader Saraireh (2022) Bim adoption framework to enhance efficiency of contractual issues in the jordanian construction sector. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Haron, Ahmad Tarmizi).

Ihsan Naiman, Ibrahim (2022) Simulation and experimental analysis on automotive radiator using organic nanocellulose. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Devarajan, Ramasamy).

Ijeomah, Geoffrey Ugochukwu (2018) Theoretical study of transport properties of nanoelectronics for sensor application. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ilan Cheliyan, Samylingam (2021) Investigation of thermophysical properties of ternary nitrate based phase change material induced with mxene as novel class of nanocomposites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Imaduddin, Abidin (2022) University-industry collaborations and its impact on firm performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rashidi, Ab Hamid).

Imam, Ul Ferdous (2022) Influence of notch constraint on creep damage evolution and rupture life of grade 91 steel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nasrul Azuan, Alang).

Imla Syafiqah, Mohd Salleh (2018) Removal of mercury (II) ion from industrial wastewater using palm oil fuel ash. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Imran, Khan (2021) The effect of active reading software on saudi efl learners’ reading comprehension skills. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Imtiaz, Ali (2023) Energy, exergy and economic analysis of nano-enhanced phase change materials integrated solar photovoltaic thermal systems. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Imtiaz, Hassan Taj (2022) Augmenting efl vocabulary learning and reading comprehension through mobile phone-based vocabulary learning tasks and computer-based reading activites. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ali, Fatimah).

Intan Bazliah, Mohd (2020) Developing an integrated model between QFD and AHP for assembly line : case study at an electronic company. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ibrahim, Abdullah).

Intan Shafinaz, Abd Manaf (2016) Transesterification of crude palm oil adsorbed on spent bleaching clay and catfish oil using CaO and ZnO as catalysts. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Intan Shafinaz, Abd Manaf (2020) Transesterification via different intensification methods using waste feedstocks and waste heterogeneous catalysts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Intan Suhana, Mohd Razelan (2015) Development of composite risk index for federal roads in Malaysia. PhD thesis, Universiti Putra Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Irfan, Ahmed (2017) Vertically aligned hierarchical nano-architectures for highly efficient and stable solution processable solar cells. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Irma, Nurfitri (2015) Methyl Ester production using feedstock and catalysts from waste sources. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Gaanty Pragas, A/L Maniam).

Irshad Ahamad, Khilji (2023) Optimisation of electrical discharge machining for oxidation-free metallic nanoparticle synthesis of titanium alloy. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Nadiah, Mohd Safee).

Ishmael, Ukaegbu Chinonso (2019) Study on antiproliferative activity of hypsizygus tessellatus and flammulina velutipes extracts adsorbed on sulphated zirconia nanoparticles against breast cancer cell lines. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ishmael, Ukaegbu Chinonso (2016) Optimization of pretreatment and saccharification processes of empty fruit bunches (efb) for bioethanol production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Islam, Md Kamrul (2019) An online density-based clustering algorithm for data stream based on local optimal radius and cluster pruning. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zamli, Kamal Zuhairi).

Islam, Md. Shaharul (2018) Cellulose supported transition metal (Cu, Pd) catalysts for carbon-carbon and carbon-nitrogen bonds formation reactions. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Tan, Suat Hian).

Islam, Mohammed Amirul (2018) The influence of microbial mutualistic interactions and biofilm formation on the performance microbial fuel cell. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Islam, S. M. Rafiqul (2012) Synthesis of xylitol from meranti wood sawdust in batch process by locally produced xylose reductase. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Ismail, Ibrahim (2016) Multi-state PSO GSA for solving discrete combinatorial optimization problems. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ismail Ali, Abdul Aziz (2022) Tooth bending stress and tooth impact stress of thin-rimmed spur gear. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daing Mohamad Nafiz, Daing Idris).

Izan Izwan, Misnon (2016) Development of supercapacitors with in-situ polymerized polyaniline on MnO2 and Co3O4 anodes and activated carbon cathodes. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Izzati, Ahmad Rudaini (2019) PVDF-alumina and PVDF-bentonite hollow fiber membrane for CO2 absorption via membrane contactor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

J

Jadhav Pramod, Chandrakant (2023) Trimetallic nanoparticles in anaerobic digestion process for biogas production. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Nasrullah, Zulkifli).

Jamal Rizal, Razali (2014) Metafora dalam ucapan presiden UMNO 2000-2010: kuasa patriotisme dan setia kawan. PhD thesis, Universiti Sains Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

James Lau, Tze Chen (2020) Thermophysical properties charaterisation of water based mango oxide hybrid nanofluid. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Jamil, Roslan (2019) Hybrid solar still with addition of charcoal and oil palm fiber ash for seawater desalination. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Jamiluddin, Jaafar (2019) Characterization of short pineapple leaf fiber reinforced tapioca biopolymer composites. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siregar, Januar Parlaungan).

Jarial, Rini (2017) Extraction, characterization and purification of flavonoids from filicophytes. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Jarrud Mohamed, Muftah Mohamed (2022) Flexural performance of built-up cold-formed steel beam (CFSB) filled with concrete. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Lim, Kar Sing).

Jasim, Saleh Eesaa (2018) Miniaturization of microwave bandpass filters using nanostructured and bulk YBa2Cu3O7−δ superconductor films. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Ashry, Jusoh).

Jasni, Mohamad Zain (2005) Digital Watermarking in Medical Images. PhD thesis, Brunel University, West London (Contributors, UNSPECIFIED: UNSPECIFIED).

Jasri, Mohamad (2013) Springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation. PhD thesis, University of Strathclyde (Contributors, UNSPECIFIED: UNSPECIFIED).

Jawad, Asif (2022) Controlling shareholdings, intellectual capital and firm performance: evidence from Malaysian listed firms. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wei, Irene Kiong Ting).

Jayshree, Thuraisingam (2019) Synthesis and characterization of bio-adhesive using natural rubber latex and bio-based fillers for medium density fibreboard manufacturing. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ja’far, Al-Diabat Al-Btoosht (2018) The role of building information modelling design application in mitigating the variation order in Jordanian construction industry. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Jebunnesa (2014) Occupational English writing test for potential nurses in Kuantan Pahang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Jeevendran, Kananathan (2023) Mechanical behavior of fdm 3d printed coconut wood-filled pla. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Jeroish Zachariah, Ezhilnavaroji (2022) Design and analysis of integrated paper based biochip with microheater for lamp using viral mimicking nano particles. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Fahmi, Samsuri).

Jessinta, Sandanasamy (2014) Chemical characterization and biological studies of Neem (Azadirachta Indica) extracts. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hamid Nour, Azhari).

Jessnor Arif, Mat Jizat (2014) Landmark guided trajectory of an automated guided vehicle using omnidirectional vision. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zahari, Taha).

Jing, Wang (2013) An investigation on devoutness Islamic prayer among female college students through biofeedback. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: MUHAMMAD NUBLI, ABDUL WAHAB).

Jothi Letchumy, Mahendra Kumar (2021) The classification of wink-based eeg signals by means of transfer learning models. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Joyce Cynthia, Jalani (2023) Isolation and characterization of mesophile pla-degrading bacteria from landfill soil. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zatul Iffah, Mohd Arshad).

Ju, Soon Yew, @ Yew, Soon Yu (2019) Employees’ organizational citizenship behaviour toward the environment : a conditional mediation model. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Juliawati, Alias (2016) The influence of hot forming-quenching (HFQ) on the microstructure and corrosion performance of AZ31 magnesium alloys. PhD thesis, University of Manchester (Contributors, UNSPECIFIED: UNSPECIFIED).

Juliawati, Alias and Mohamad Mazwan, Mahat and Mohd Akramin, Mohd Romlay (2010) Developments of aneurysm rupture prediction method using fracture mechanics analysis = pembangunan kaedah jangkaan pemecahan aneurisma menggunakan analisis mekanik rekahan. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Juliza, Mohamad Arif (2022) Fuzzy analytical hierarchy process based risk assessment for malware detection in android mobile system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Faizal, Ab Razak).

Jun Haslinda, Haji Shariffuddin (2015) Investigating the catalytic properties of hydroxyapatite derived from mussel shells for the treatment of wastewater. PhD thesis, The University of Auckland (Contributors, UNSPECIFIED: UNSPECIFIED).

Junior, Bokolo Anthony (2018) A green IT/IS assessment model for attaining sustainability in Malaysia collaborative enterprise. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mazlina, Abdul Majid).

Junita, Mohd Said (2023) Integrated assessment of MIG welding parameters on carbon steel using RSM optimization. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Faiz, Mohd Turan).

Jurida, Jamaludin (2021) Development and characterisation of gum arabic-kappa carrageenan composite film For hard capsule application. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Juwari (2011) A new tuning method for two-degree-of-freedom internal model control under parametric uncertainty. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Badrulhisham, Abdul Aziz).

K

K., Palaniselvam (2015) In-vitro biological activities of Au and Ag nanoparticles biosynthesized using commelina nudiflora L. aqueous extract. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Natanamurugaraj, Govindan).

Kaaliarasan, Ramachandran (2017) Cellulose nanocrystals as a dispersant in thermal transport fluid : investigation of heat transfer analysis in automotive cooling system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kadirgama, Kumaran).

Kalaiarasan, Muthusamy (2023) Optimization & characterization of glipizide oral suspension formulation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Kamal, Ariffin (2011) Study of wear mechanism in the contact between table liner and roller of vertical roller mills. Masters thesis, Saitama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Kamaliah, Abdul Samad (2017) Synergistic ferulic acid production from banana stem waste by co-culture. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kamarulzaman, Mahmad Khairai (2022) The study of stress and work-life balance program at bi technologies corporation sdn bhd on cognitive ergonomics functions to improve work performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nubli, Abdul Wahab).

Kamil Zakwan, Mohd Azmi (2017) Opposition- based simulated kalman filters and their application in system identification. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kamisah, Kormin (2012) The contextual factors in the recognition of commercialization opportunity among Malaysian public universities researchers. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kamrul Fakir, Kamarudin (2014) Pilycoremediation of palm oil mill effluents (POME) using scenedesmus dimorphus and ciilorella vulgaris. Masters thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Karthiani, Kanagesan (2022) Cultivation of microalgae nannochloropsis sp. In palm oil mill effluent for biodiesel production. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Natanamurugaraj, Govindan).

Kartina, Johan@Rahmat (2023) A development of collaboration model for strategic engagement between SME Malaysia and universities using attitudinal parameter in the context of university industry collaboration. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Faiz, Mohd Turan).

Kasturi, Sivabalan (2023) The use of whatsapp as a collaborative tool in vocabulary learning among tertiary level students. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zuraina, Ali).

Kavinmugil, Kalaiselvan (2022) Degassing effect on nickel aluminum bronze alloy castings. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Maarof, Mohd Rashidi).

Keeran, Anamalai (2019) Development and analysis of Ethylene Glycol/Nanocellulose based Nanofluid Coolant for machining SUS 304 stainless steel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kelvin Lazarus, Lazarus (2017) Adaptive beamforming algorithm based on Simulated Kalman Filter. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nurul Hazlina, Noordin).

Keream, Settar Subry (2017) Enhancement of a three phase induction motor performance by using a nonlinear inverse dynamics controller. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kesavarma, Seluraju (2022) Investigation of mechanical behavior and properties prediction modelling of copper-filled filament for 3d printing. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Khadijah Husna, Abd Hamid (2019) Semi-refined carrageenan/glycerol/α-tocopherol hybrid films as active packaging for extending the shelf life of meat. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khafniza, Khanafiah (2013) Biofertilizer from organic solid waste using em4. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Said, Nurdin).

Khairi Ali, Abulgasem Alennabi (2012) Study on biodegradation of Miri and Masila crude oil and used car oil by microorganisms isolated from Malaysian soil and the effect of aeration and NKP addition on biodegradation process. EngD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Azhari Hamid, Nour).

Khairool Azizul, Mohammad (2020) Characterisation and nucleation kinetics of carbamazepinesaccharin co-crystal. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abd Rahim, Syarifah).

Khairool Azizul, Mohammad (2013) Strength agent application in mechanical pulps for packaging application. Masters thesis, Monash University (Contributors, UNSPECIFIED: UNSPECIFIED).

Khairul Fikri, Muhammad (2011) Optimization of cutting parameters for CO2 laser beam cutting using variable wiight grey-taguchi method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khairul Muzafar, Ahmad (2017) Modification of austenitic cast iron (Ni-resist) with high manganese content by using heat treatment. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rashidi, Maarof).

Khairul Salleh, Abdul Basit (2022) Exploring the influence of service quality (sq) on patient satisfaction (ps) : a case study of universiti malaysia pahang health centre (umphc). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Suhaidah, Hussain).

Khairunisa, Muthusamy (2009) Properties of palm oil fuel ash cement based aerated concrete. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Khalaf, Emad T (2012) Enhancement of cryptography and transform domain in steganography for higher embedding capacity. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazila, Sulaiman).

Khalaf, Emad Taha (2019) An efficient indexing and retrieval of iris biometrics data using hybrid transform and firefly based K-means algorithm title. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: N. Mohammed, Muamer).

Khalaf, Osamah Ibrahem (2017) Performance enhancement of adaptive cluster formation and routing protocols in wireless networks. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khalaf Ibrahim, Hamada (2012) A study of the heat transfer in hydrogen fueled internal combustion engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rahman, Md. Mustafizur).

Khaled Salem, Aljfairi (2013) Ultrasonic membrane anaerobic system for wastewater treatment. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khalid Adam, Ismail Hammad (2021) Development of low-overhead soft error mitigation technique for safety critical neural networks applications. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khalid Adam, Ismail Hammad (2017) Mapreduce algorithm for weather dataset. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mazlina, Abdul Majid).

Khalid Hassan, Mohamed Edris (2016) Robust image watermarking techniques using image features. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khalil Mesbah, AbdulJalil (2015) An investigation on user's intention to adopt accounting information system in Libyan small and medium enterprises: an analysis of structural equation modeling. UNSPECIFIED thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khamisah, Abdul Hamid (2016) Experimental investigation on forced convection heat transfer of water - ethylene glycol based TIO2 nanofluid. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khamisah, Abdul Hamid (2019) Forced convection heat transfer performance of TiO2-SiO2 nanofluids with wire coil inserts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khan, Asadullah (2019) Performance of public sector infrastructure projects in Pakistan : the role of project governance through stakeholder management and benefit management. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khan, Nawsher (2013) A new scheduling technique to improve data management in cloud computing. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noraziah, Ahmad).

Khandakar Fazley, Rabbi (2012) Development of efficient t-way test data generation algorithm and execution strategies. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kharsah, Wael Sahdo (2017) The correlation between self-esteem, university commitment and academic performance among undergraduate students at the final year of their degree. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kharudin, Ali (2017) Lift-off detection system using Error Compensated Eddy Current Testing based on fuzzy logic. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Roshahliza, M Ramli).

Khatun, Fatema (2020) Photocatalytic conversion of carbon dioxide to methane using RGOAu-TNTs. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kho, Yap Bing (2018) Numerical solutions for casson and williamson nanofluids over a stretching sheet. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zulkhibri, Ismail).

Khor, Ai Chia (2021) Characterization of negative electrolyte– alizarin red s and positive electrode felt for organic redox flow battery application. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamed, Mohd Rusllim).

Khor, Hui Liang (2017) A new multi-frames watermarking technique for tamper detection and recovery. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Liew Siau, Chuin).

Khudhur, Ahmed Mahmood (2018) Optimization and improvement of hodgkin-huxley model under the influence of ion channel noise in neurons. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kiriyadhatshini, Gunaratnam (2023) Hazard analysis for the requirements specification of safety-critical systems using the combination of FHA and FTA techniques. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: UNSPECIFIED).

Koay, Li Woon (2019) Design and development of a wireless indoor smart energy saving and monitoring. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Manap, Hadi).

Koh, Zhi Yuan (2016) Flexural behavior of reinforced concrete beam with variation of coated reinforcement. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kohmalam, Ayanasamy (2023) Correlation of fouling mechanism with enzymatic hydrolysis in an enzyme-membrane integrated system for high sugar permeation from pineapple leaves. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Shafiq, Mohd Sueb).

Kong, Chung Hwa (2021) Investigation of inclusion casting, sand blasting and embossing methods to prepare engine cylinder bore surface for frictional and wear improvement. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kong, Zi Ying (2015) Application of CuFe2O4 for photocatalytic fenton degradation of glycerol. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Cheng, Chin Kui).

Krishnan, Syam G. (2017) Development of magnesium cobalt oxide and its composite with reduced graphene oxide for asymmetric supercapacitor applications. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kurukuri, Peddakapu (2021) Frequency deviations stabilizations in restructured power systems using coordinative controllers. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rusllim, Mohamed).

L

Laili, Zulkepeli (2022) Optimization of industrial matching grant application system in ump : a value stream mapping approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Gusman, Nawanir).

Lardhi, Fatima Ali Salah (2019) An analysis of English pronunciation learning strategies among Arab EFL learners in Universiti Malaysia Pahang (UMP). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Radzuan, Noor Raha).

Law, Woon Phui (2017) Effect of nozzle assembly, insulation and operating condition on partial combustion unit performance : computational fluid dynamics and experimental study. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Lazim, Raghad Yaseen (2016) Evaluation of XML documents queries based on native XML database. UNSPECIFIED thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Lee, Lay Khoon (2017) Region-growing based segmentation and bag of features classification for breast ultrasound images. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Lee, May Shian Helen (2023) Evaluation of glass nano/microstructures replication fidelity after laser-assisted hot embossing process. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Zairulnizam, Mohd Zawawi).

Lee, Zhan Sheng (2022) Catalytic oxidative hydrothermal treatment of palm oil mill effluent over CuO/Al2O3 and Ce-CuO/Al2O3 catalysts. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Chin, Sim Yee).

Lee, Zheng Ping (2022) A novel decision support tool for assessing the suitability of design-build method for civil construction projects in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahimi, Abdul Rahman).

Lee, Zheng Ping (2022) A novel decision support tool for assessing the suitability of designbuild method for civil construction projects in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahimi, Abdul Rahman).

Li, Feng (2018) Linking leaders’ personality, leadership style and employee engagement : evidence from SMES at Kuantan, Malaysia. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Liu, Yao).

Li, Jie (2023) Classification of rail defect based on B-type display image using deep learning method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Doh, Shu Ing).

Li, Maoqi (2023) Investigation on maneuverability improvement of a four-wheel drive and rear-wheel steering system : numerical simulation analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohammad Izhar, Ishak).

Liang, Yong Yeow (2012) Development of block-oriented model for reactive distillation column: MTBE synthesis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Liang, Yong Yeow (2015) Concentration polarisation minimisation in membrane channels through electro-osmotic mixing. PhD thesis, Universiti of New South Wales (Contributors, Thesis advisor: Wiley, Dianne).

Liew, Shi Yan (2019) Computational fluid dynamics and experimental study of hydrodynamics in an internal airlift reactor. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Gimbun, Jolius).

Liew, Siew Chuin (2011) Tamper localization and recovery watermarking schemes for medical images in PACS. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jasni, Mohd Zain).

Lim, Sheh Hong (2021) Computational study of hemodynamics analysis between mri measurement and cfd simulation on segmented patient-specific cerebral aneurysm model. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Adib, Mohd Azrul Hisham).

Lim, Shi Xuen (2023) The formulation of a transfer learning pipeline for the classification of the wafer defects. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Ismail, Mohd Khairuddin).

Lim, Soon Yee (2020) Numerical simulation studies of the effect of membrane permeance on mass transfer enhancement driven by transient slip velocity. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Liang Yong, Yeow).

Lim, Syh Kai (2018) Investigations of nanocoolant based Al2O3 for improving cooling performance in hot press forming. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Razlan, Yusoff).

Ling, Fiona Wang Ming (2022) Biocatalysts synthesis and deposition in microfluidics flow system. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hayder, A. Abdulbari).

Ling, Fiona Wang Ming (2017) Flow enhancement in microchannels using okra, aloe vera and hibiscus mucilages. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ling, Jin Kiong (2019) Synthesis and characterization of Al2O3-SnO2 composite nanofibers by electrospinning for dye-sensitized solar cells. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Lingenthiran, Samylingam (2015) Mechanical and physical properties of kenaf fibre reinforced thermoplastic elastomer composites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Lingenthiran, Samylingam (2019) Modelling and verification of TiO2/ZnO/EGW nano coolant on the tin milling tool performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, A/l Kadirgama).

Liu, Xinni (2021) Enhanced faster region-based convolutional neural network for oil palm tree detection. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Liu, Yao (2011) A sense-making based model for effective decision making in implementing knowledge management within SMEs in Wuhan, China. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Othman).

Liyana, Mohamed Yusof (2010) Accessibility for wheelchair users in public parks : a comparison between Adelaide and Kuantan. Masters thesis, The University of Adelaide (Contributors, UNSPECIFIED: UNSPECIFIED).

Liyana, Amer Shah (2014) Microwave assisted enzymatic transesterification of waste cooking oil & rubber seed oil. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ir Said, Nurdin).

Liyana Nadirah, Mat Suli (2014) Oil-in-water emulsion enhancement for viscous crude oil flow in pipeline. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Liza Evianti, Tanjung (2013) Assessment of heavy metal deposition in surface water and sediment in Balok and Tunggak River, Kuantan, Malaysia. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Ishak, Wan Faizal).

Low, Aik Qi (2018) Performance of coagulation, adsorption, ultrafiltration and hybrid treatment system on kaolin/humic acid removal. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

M

M. F., Abas (2013) Autonomous formation flight control of multiple UAVs with motion capture system. PhD thesis, Chiba, Japan : Chiba University (Contributors, UNSPECIFIED: UNSPECIFIED).

M. F., Ghazali (2012) Leak detection using instantaneous frequency analysis. PhD thesis, The University of Sheffield (Contributors, UNSPECIFIED: UNSPECIFIED).

M. F. F., Ab Rashid (2013) Intergrated multi-objective optimisation of assembly sequence planning and assembly line balancing using particle swarm optimisation. PhD thesis, University of Cranfield (Contributors, UNSPECIFIED: UNSPECIFIED).

M. Nafis, O. Z. (2014) Computer Numerical controlled (CNC) machine for rapid manufacturing processes. PhD thesis, Loughborough University (Contributors, UNSPECIFIED: UNSPECIFIED).

M. R. M., Rejab (2013) The mechanical properties of novel lightweight structures based on corrugated-cores. PhD thesis, University of Liverpool (Contributors, UNSPECIFIED: UNSPECIFIED).

M. Rafiqul, Islam (2015) An experimental study and modeling on gas metal arc welded lap joint of A7075-T651 aluminium alloy to AZ31B magnesium alloy. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ishak, Mahadzir).

M. S., Najib (2012) Agarwood classification based on odor profile using intelligent signal processing technique. PhD thesis, Universiti Teknologi Mara (Contributors, UNSPECIFIED: UNSPECIFIED).

M. Z., Sharif (2016) Performance analysis of SiO₂PAG nanolubricant in automotive air conditioning system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ma, Xiuqin (2012) New Parameter Reduction of Soft Sets. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norrozila, Sulaiman).

Madan Varmma, Suparmaniam (2019) Suppression of chatter in high-speed milling machine using spindle speed variation method with microphone feedback PID controlller. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Madderla, Sandhya (2023) Development of water-ethylene glycol based graphene nanoplatelets/cellulose nanocrystal hybrid nanofluid as radiator coolants and its performance evaluation. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Devarajan, Ramasamy).

Mah, Kah Hong (2016) Optimization of interfacial polymerization thin film composite membrane for separation of xylose from glucose. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mahadi, Bahari (2021) Co2-ch4 reforming over lanthanide promoted cobalt/mesoporous alumina catalyst for syngas production. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Setiabudi, Herma Dina).

Mahadi, Bahari (2017) Ethanol dry reforming over lanthanide-promoted Ni/A12O3 catalysts for syngas production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mahdi, Mazin Mustafa (2018) Load frequency control using adaptive and fuzzy based controller for hybrid micro-grid system. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Zaharin, Ahmad).

Mahendran, Samykano (2015) Physical and mechanical characterization of electrodeposited nickel nanowires - influence of current density and external magnetic field. PhD thesis, North Carolina A&T State University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mahendran, Samykano and T., Nagarajan and Dr., Majdi and D., Ramasamy and K., Kadirgama and M. M., Noor and Lee, Giok Chui and Mohd Fazli, Ismail (2011) Investigation of micromachining of silicon using micro-EDM = penyelidikan dalam pemesinan mikro bagi silicon menggunakan EDM mikro. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mahfuzah, Mustafa (2004) Connection siemens PLC (programmable logic control) to labview using OPC (ole for process control). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mahfuzah, Mustafa (2014) Eeg sub-band frequency analysis of spectrogram image for balanced brainwave and iq applications. PhD thesis, Universiti Teknologi Mara (Contributors, UNSPECIFIED: UNSPECIFIED).

Mahima, Karim (2022) Hybrid mac strategy exploiting markov chain model for iot enabled intra-vehicular health monitoring system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Arafatur, Rahman).

Maizatul Asnida, Hassan (2018) Tribological behaviour of copper (II) oxide nanoparticles based lubricant to improve durability of contact surface. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Makeen, Mohd Amin (2018) Leak detection in medium density polyethylene pipe using ensemble empirical mode decomposition method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd. Fairusham, Ghazali).

Malar Vizhli, Sivaguru (2019) Synthesis of catalyst from eggshell and perna v. Shell for biolubricant production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Maliessa Nabilah, Mazelan (2023) The effect of different Sn-Ag-Cu (SAC) solder form on solder/Cu joint performance through microwave hybrid heating. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Rabiatull Aisha, Idris).

Malini, Subramaniam (2018) Preparation and characterization of rice starch and transition metal stearates filled polypropylen. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mamunur, Rashid (2020) Study of non-invasive cognitive tasks and feature extraction techniques for brain-computer interface (BCI) applications. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Manal Suliman, Omer Tagad (2023) Organizational factors and risk management practice of Malaysian contractors: the moderating role of coercive pressure. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Lee, Chia Kuang).

Mandal, Ashis Kumar (2016) Partial examination assignment approaches for solving examination timetabling problems. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mansor, Sulaiman (2012) Hubungan sunnah Allah dan pembinaan akhlak dalam kebangunan tamandun : analisis terhadap tamadun arab Islam zaman Rasulullah. PhD thesis, Universiti Malaya (Contributors, UNSPECIFIED: UNSPECIFIED).

Mariah, Che Mamat (2022) Sulfide removal from petroleum refinery wastewater using hydrogen peroxide and chemically modified activated carbon. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Aziz, Mohd Azoddein).

Marlina, Yakno (2013) Intelligent hand vein image exposure system to aid peripheral intravenous access. Masters thesis, Universiti Sains Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Marwah Noori, Mohammed (2013) Production of biodiesel from castor oil : a feasibility study. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: GHAZI FAISAL, NAJMULDEEN).

Mas Ayu, Hassan (2015) Effects of hydroxyapatite coating with oxide interlayer on bioactivity performances in CoCrMo alloy. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mas Ira Syafila, Mohd Hilmi Tan (2023) Terahertz sensing analysis for early detection of ganoderma boninense disease using near infrared (NIR) spectrometer. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Faizal, Jamlos).

Masitah, Jusop (2016) Multi-objective optimisation of assembly line balancing type-e problem with resource constraints. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Ab. Rashid).

Masood, Kamal (2015) A new hybrid multiaxial fatigue life model based on critical plane continuum damage mechanics and genetic algorithm. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Mustafizur, Rahman).

Mawarnie, Ismail (2021) Mechanical properties and fracture behavior of natural fiber-glass fiber reinforced epoxy matrix hybrid composites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ruzaimi, Mat Rejab).

Mazeni, Ismail (2020) Keberkesanan pendekatan islamic project© sebagai kaedah pengajaran dan pembelajaran terkini pendidikan akhlak dalam kalangan guru serta murid prasekolah kemas di negeri Kelantan. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hj Hasmadi, Hj Hassan).

Maziatun, Mohamad Mazlan (2023) Computational time analysis in extended kalman filter based simultaneous localization and mapping. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nur Aqilah, Othman).

Maziyah, Mat Noh (2003) Liquid level sensing device. Masters thesis, Newcastle-upon-Tyne, UK (Contributors, UNSPECIFIED: UNSPECIFIED).

Mazlan, Abu Seman (2018) Blast impact on reinforced concrete wall. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syed Mohsin, Sharifah Maszura).

Mazma Syahidatul Ayuni, Mazlan (2019) Stochastic model of cancer growth with the effect of glycosaminoglycans (GAGs) as anticancer therapeutics. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mazni, Ismail (2013) Model development and validation of samaria doped ceria (SDC) based solid oxide fuel cell operating with practical fuels. PhD thesis, University of Waterloo (Contributors, UNSPECIFIED: UNSPECIFIED).

Mazza Seddig, Adam Abbakar (2015) Ultrasonicated Membrane Anaerobic System (UMAS) for sewage sludge treatment. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Md Abdul, Kader (2023) Fuzzy adaptive emperor penguin optimizer for global optimization problems. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kamal Zuhairi, Zamli).

Md Abdus, Sobahan (2015) Effects of industrial wastewater on water and sediment qualities and effectiveness of bioremediation methods of industrial wastewater treatment, Gebeng, Pahang, Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Md Ahasanul, Karim (2020) Microbial lipid accumulation through bioremediation of palm oil mill effluent by co-culturing yeast and bacteria. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Che Ku, Mohammad Faizal).

Md Nahidul, Islam (2022) Human hearing disorder recognition model using eeg-aep based signal. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norizam, Sulaiman).

Md Noh, Ab. Majid (2017) Determinants and outcomes firm state of innovativeness in Malaysian service sector : a study on knowledge-intensive business services firm. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Md Shahnewaz, Shoaib (2023) Physical and mechanical properties of porous asphalt incorporating bamboo fiber. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Khairil Azman, Masri).

Md. Ashraful, Kader (2023) Development of TIO₂ nanotube and SNO₂ nanofiber supported gold nanoparticle based non-enzymatic H₂O₂ sensors and its practical applications. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Nina Suhaity, Azmi).

Md. Najmul, Kabir Chowdhury (2014) Synthesis and characterization of nanoparticle incorporated polymer composite materials. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Md. Nazmus, Sakib (2022) Study on the fabrication and mechanical characterization of graphene-epoxy nanocomposite material. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nafrizuan, Mat Yahya).

Md. Rahim, Uddin (2016) Development of Tio2 loaded Cufe2o4 photocatalyst for CO2 conversion into methanol under visible light irradiation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Megat Muhammad Afif, Megat Muainuddin (2021) Time arrival in series forecasting model for tourist National Park Kuala Tahan, Pahang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mehfooz, Ullah (2021) Enabling sustainable project management in pakistani construction industry : the influence of institutional pressures and moderating role of transformational leadership. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Meng, Liu (2011) Identification and partial characterisation of locally isolated lipolytic bacteria. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Miah, Roney (2022) Identification of usnic acid derivatives as new antiviral agents via virtual screening on dengue, influenza A and avian influenza A. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadhlizil Fasihi, Mohd Aluwi).

Milad, Nasradeen Ali Khalifa (2016) Prediction of road pavement damage for local roads in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mimi Rabita, Abdul Wahit (2022) Examining the role of green human resources management (GHRM) in building green corporate image and green competitive advantage in malaysian public universities. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Ashraf, Fauri@Fauzi).

Mirza Rizwan, Sajid (2021) Modeling of cardiovascular diseases (CVDs) and development of predictive heart risk score. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noryanti, Muhammad).

Mishra, Puranjan (2018) Biohydrogen production from palm oil mill effluent via sequential dark-photo fermentation. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ab Wahid, Zularisam).

Miss Hasimawaty, Mat Kiah (2013) Premixed flame acceleration in straight and bend close pipe. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Al Aamin, Razali (2019) Solid state fermentation of Monascus purpureus in stirred drum bioreactor for production of red pigment from oil palm frond. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Asghaiyer, Mohamed Omran (2023) New topology of shunt hybrid power filter for harmonic mitigation and re-utilization of harmonic filter current as useful power. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Izzeldin Ibrahim, Mohamed Abdelaziz).

Mohamad Fadli, Zolkipli (2012) A framework for malware identification based on behavior. PhD thesis, Universiti Sains Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Firdaus, Basrawi (2012) Performance analysis and optimization biogas-fuelled cogeneration systems in sewage treatment plants. PhD thesis, Kitami Institute of Technology, Hokkaido, Japan (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Hafidzul Rahman, Alias (2022) Optimization of solenoid driver and controller for gaseous fuel high-pressure direct injector using model-based approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil, Abdul Rahim).

Mohamad Hafiz, Mohamad (2021) 4 axis machining simulation routines via application programming interface (API) in cam systems. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammed Nafis, Osman Zahid).

Mohamad Hazeem, Mohmad Sidik (2017) Modelling of the antecedents of staff satisfaction on turnover intention in a Malaysian Public University. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rashid, Ab Hamid).

Mohamad Heerwan, Peeie (2012) Skid control of small electric vehicle with hydraulic-mechanical hybrid brake system. Masters thesis, School of Engineering (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Izuan, Izzudin (2022) Investigation on performance, combustion and emission characteristics using biodiesel-butanol-water blends in diesel engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Fitri, Yusop).

Mohamad Kamil, Mohammed (2011) Simulation models to optimise hydrogen fuelled engine performance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Milood, Mohamad Almelian (2022) Enhancement of performance and response time of cascaded vsc statcom in the presence of voltage variation and low power factor. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Izzeldin Ibrahim, Mohamed Abdelaziz).

Mohamad Mokhtar, Ibrahim (2023) Enhancing anaerobic digestion of palm oil mill effluent (POME) by addition of cao derived from waste cockle shell as a buffering solution in an upflow anaerobic sludge blanket (UASB) reactor. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Zulkifly, Jemaat).

Mohamad Nazirul Mubin, Merzuki (2020) Investigation on mechanical and modal properties of aluminium based fibre metal laminates. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ruzaimi, Mat Rejab).

Mohamad Redhwan, Abd Aziz (2018) Performance analysis of aluminimum oxide/polyalkylene glycol nanolubricant in automotive air conditioning system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Rizdwan, Rashid Chand (2020) Performance of micro gas turbine trigeneration system and photovoltaic hybrid based system in remote area applications. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Rozi, Hassan (2017) Pengaruh orientasi keusahawanan dan organisasi pembelajaran terhadap prestasi perusahaan kecil dan sederhana sektor pembuatan. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Sazuan, Sarifudin (2022) Waste reduction guideline for production line using boolean algebra. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhamad Arifpin, Mansor).

Mohamad Syafiq, Abdul Wahab (2022) Development of graphene oxide incorporated polysulfone/pebax thin-film composite membranes for isopropanol dehydration. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sunarti, Abd Rahman).

Mohamad Syafiq, Abdul Wahab (2018) Synthesis, characterization and optimization of PVDF/PEBAX composite membranes for CO2/CH4 separation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Syahmi, Shahrom (2016) Direct recycling of aluminium alloy 6061 and 7075 employing cyclic extrusion compression back pressure technique. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Zairi, Baharom (2013) Sistem brek elektromagnetik boleh kawal menggunakan arus pusar. Masters thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamd Salih, Sinan Qahtan (2019) Nomadic people optimizer (NPO) for large-scale optimization problems. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdulrahman, A. Alsewari).

Mohamed Abdulwali, Ali Alsamawi (2021) The effect of corporate social responsibilities on corporate performance: the mediating role of corporate culture and affective commitment. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamed Ghayth Farhat, Elghdban (2023) Building information modeling (BIM) adoption among Libyan construction organizations : the moderating effect of organizational culture. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Nurhidayah, Azmy).

Mohamed Reza Zalani, Mohamed Suffian (2022) Plasma spray of nicraly coating on laser surface modified H13 tool steel. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah Nur Aqida, Syed Ahmad).

Mohamed Saad, Bala Husain (2022) Synthesis and characterization of wound healing hydrogel using keratin protein from chicken feathers. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Arun, Gupta).

Mohammad, Almohammad (2020) Developing a model to predict time delay in road construction projects using bayesian networks. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jamaludin, Omar).

Mohammad, Aslam (2021) Microfinance impact on borrowers’ poverty in Bangladesh and Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Senthil, Kumar).

Mohammad Affendy, Omardin (2021) The development building maintenance training model of healthcare industry. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad Basir, Bakhtyari (2015) Afghanistan students' perceptions of the use of online tools for enhancing learning. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad Fazle, Rabbi (2016) High mobility channel estimation based on amplifyand-forward model in cooperative network. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad Hassan, Mudaber (2015) Persistency and permanency of two stages splicing languages based on DNA recombination process by using Yusof-Goode (Y-G) approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad Hazim, Mohamad Hamdan (2021) Effect of laminated parameters on mechanical properties hybrid juteramie reinforced unsaturated polyester composite. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad Iqwhanus Syaffa, Amir (2019) An artificial neural network approach for classification and prediction of low pressure chemical vapor deposition SixNy ISFET pH sensor drift. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Othman, Md. Rizal).

Mohammad Khamees Khaleel, Alsajri (2022) Improved hybrid teaching learning based optimization-jaya and support vector machine for intrusion detection systems. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Arfian, Ismail).

Mohammad Nasim, Tahsildar (2015) The impact of teaching cohesive devices on l2 students’ listening comprehension test scores and language accuracy in written production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad Syawaludin Syafiq, Hassan (2016) The development of a tracking algorithm for ambulance detection using squaring of RGB and HSV color processing techniques. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad Zuhaili, Yahya (2017) Synthesis and optimization of poly (HEMA-co-EGDMA-co-VBC) for preparation of hypercrosslinked aminated polymer using DoE method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed, Ahmed Talab (2022) Integration of blcm and flbp in low resolution face recognition. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Suryanti, Awang).

Mohammed, Ibrahim Awad (2019) Isolation of cardamonin, pinostrobin chalcone from the rhizomes of Boesenbergia rotunda and their cytotoxic effects againts colon cancer HT29 and breast cancer MDA-MB-231 cell lines. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohammed Nadeem, Akhtar).

Mohammed, Khudair Abbas (2019) Generic nodal abstraction for enhancing human-agent collaborative model with an integrated security and trust aspects. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed, Marwah Noori (2019) Synthesis and characterization of thermoresponsive poly (N-vinylcaprolactam) / fillers nanocomposite. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed, Maysoon A. (2018) Priority and dynamic quantum time algorithms for central processing unit scheduling. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed, Mohammed Adam Taheir (2017) An enhanced soft set data reduction using decision partition order technique. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah Arshah, Ruzaini).

Mohammed, Nasir (2013) Fabrication and characterization of medium density fiber board prepared from enzyme treated fiber and lignin based bio adhesive. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed, Suad Khairi (2018) An experimental study of modified black hole algorithms. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ibrahim, Zuwairie).

Mohammed Abdullah, Abdullah Nasser (2018) Sequence and sequence-less t-way test suite generation strategy based on the elitist flower pollination algorithm. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed Adam, Kunna Azrag (2021) Enhanced segment particle swarm optimization for large-scale kinetic parameter estimation of escherichia coli network model. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Tuty Asmawaty, Abdul Kadir).

Mohammed Adam, Kunna Azrag (2015) Kinetic paramaters identification for large-scle metabolic model of escherichia coli. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Tuty Asmawaty, Abdul Kadir).

Mohammed Ahmed, Mohammed Hajar (2021) The effects of value innovation on companies' performance in Yemen telecommunications industry. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed Akmal Hanif, Ismail (2023) The effect of building information modelling implementation on sustainable project performance in the construction industry: a mediating impact of circular economy practices. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Yudi, Fernando).

Mohammed Al-Fakih, Kamal Ahmed (2019) Investigating the effects of high temperature on the performance of structural steel connections using FE analysis. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed Amjed, Hossain (2014) Assessment of industrial pollution and water quality index of Tunggak River at Gebeng Pahang, Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamed Ali, Nasly).

Mohammed Babiker, Suliman Blal (2016) Investigation of antimicrobial activity, bioassay-guided isolation and identification of antimicrobial compounds from swietenia macrophylla king. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed Hammam, Mohammed Almadani (2022) The effects of energy management practices on ecological performance: mediating role of renewable energy supply chain. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Yudi, Fernando).

Mohammed Ismael, Saba (2018) An enhanced color image encryption algorithm using LT-PRNG. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ameeden, Mohamed Ariff).

Mohannad K. H., Farag (2020) Improving robotic grasping system using deep learning approach. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Adnin, Hamidi (2013) Comparison of PRF and toluene/n-heptane mixture in the mechanism of compression ignition using transient species measurements and simplified model analysis. Masters thesis, Toyama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Adnin, Hamidi (2016) Ignition mechanism analyzed through transient species measurements and its correlation with O-D and 3-D simulations for PRF and toluene n-heptane mixture. Masters thesis, Toyama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Aiman, Barudin (2016) Molecular characterization of fragrance-related transcripts in benzenoid/phenylpropanoid pathway of Vanda Mimi Palmer. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Tan Suat, Hian).

Mohd Aizudin, Abd Aziz (2014) Development of a continous pneumatic jig for solid waste separation. PhD thesis, Universiti of Notthingham (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Akmal, Azhar (2021) Product development and evaluation of probiotic tablet from locally isolated yeast saccharomycess boulardii for stomach acid tolerance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Akramin, Mohd Romlay (2016) Analysis of fatigue surface crack using the probabilistic s-version finite element model. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Ali Hanafiah, Shaharudin (2014) Estimation of thermal contact conductance value between boron steel blank and tool surface at different value of applied pressure in hot stamping process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Amir Izuddin, Mohamad Ghazali (2017) Engineering students' perceptions towards the use of a vocabulary mobile application in learning technical vocabulary. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Amir Shahlan, Mohd Aspar (2021) Formulation and optimisation of topical preparation from malaysian honey for prevention and treatment of bacterial infection. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Amirul Asyraf, Ahmad (2014) Chemical equilibrium and kinetic study of the esterification of pure and deluted acrylic acid with 2 ethyl hexanol catalysed by amberlyst 15. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Chin, Sim Yee).

Mohd Amirul Asyraf, Ahmad (2020) Kinetic and simulation studies of the esterification of acrylic acid with 2- ethyl hexanol in a batch and packed bed reactor. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Chin, Sim Yee).

Mohd Amirul Hilmi, Mohd Hanoin (2022) Development of solar assisted membrane distillation system using solar thermal collector. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nadzirah, Mokhtar).

Mohd Amirul Mukmin, Abdullah (2020) Development of thermo-responsive ionic liquid as draw solution and its performance in forward osmosis. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Anwar, Zawawi (2008) Active suspension system design for railway vehicles transporting sensitive goods and hazardous materials. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Anwar, Zawawi (2015) An optical fibre sensor for physiological bending monitoring in clinical environment. PhD thesis, University of Limerick (Contributors, Thesis advisor: Elfed, Lewis).

Mohd Arfian, Ismail (2016) Hybrid multi-objective optimization methods for in silico biochemical system production. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Arif Fikri, Rosli (2023) High-performance MWCNT/graphene nano-enhance phase change materials for efficient thermal energy storage. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mahendran, Samykano).

Mohd Ashraf, Ahmad (2015) Model-free controller design based on simultaneous perturbation stochastic approximation. PhD thesis, Department of Systems Science (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Ashraf, Ahmad and Mohd Syakirin, Ramli and Nasrul Salim, Pakheri and Nor Maniha, Abdul Ghani and Raja Mohd Taufika, Raja Ismail (2011) Experimental investigations of command shaping techniques for antsway control of double pendulum gantry crane system = kajian penyiasatan teknik pembentukan arahan untuk kawalan anti-ayunan bagi sistem kren dwi-pendulum. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azimie, Ahmad (2012) Investigating the Performance of OKRA - Natural Mucilage Compounds as Flow Improver in Pipelines Carrying Liquid – Solid Solution. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azraai, Mohd Razman (2014) Bouc-Wen model parameter identification for a new magneto-rheologigal fluid damper using particle swarm optimization. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Priyandoko, Gigih).

Mohd Azraai, Mohd Razman (2019) Hunger behaviour classification of Lates Calcarifer using machine learning for automatic demand feeder through image processing. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azri, Aris (2009) Whole energy balance for 1kw steam power plant. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azri Hizami, Rasid (2016) Contribution to multi-physical studies of small synchronous-reluctance machine for automotive equipment. PhD thesis, Université de Technologie de Compiègne (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azuri, Shaari (2020) Pembangunan model konseptual e- CAV sebagai penambahbaikan kaedah bimbingan School Improvement Partners+ (SIPartners+) dalam kalangan kepimpinan sekolah di negeri Pahang, Terengganu dan Kelantan. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Efendee, Awang (2020) Magnetic polarity influence on machining performance of magnetic field-assisted edm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Azmir, Mohd Azhari).

Mohd Fadhlan, Mohd Yusof (2021) Monitoring and assessment of weld penetration condition during pulse mode laser welding using air-borne acoustic signal. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahadzir, Ishak@Muhammad).

Mohd Fadhlan, Mohd Yusof (2012) Pemantauan dan penilaian retak lesu ke atas talian paip gas dengan menggunakan teknologi pancaran akustik. Masters thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Fadzil, Abdul Rahim (2021) Modelling and calibration of high-pressure direct injection compressed natural gas engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Aziz, B. Jaafar).

Mohd Fadzil, Abdul Rahim (2009) Numerical study of combustion for a 4-stroke gasoline engine using turbulent flame speed closure model. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Mohd Faizal, Ali (2015) Development of mucoadhesive biopolymers for food formulation. PhD thesis, University of Birmingham (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Faizal, Ali Akhbar (2020) Numerical and experimental investigations on temperature and thermal damage in cortical bone drilling. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Razlan, Yusoff).

Mohd Faizan, Jamaluddin (2013) Isolation and identification of acetic acid producer from soil using banana stem waste as a substrate. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazwina, Zainol).

Mohd Fakhrurrazi, Ishak (2014) Tree water uptake on suction distribution in unsaturated tropical residual soil slope. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Farid, Ismail (2022) Performance of polyvinyl ether based nanolubricants in residential air conditioning. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Azmi, Wan Hamzah).

Mohd Fauzi, Mohamad Yusof (2022) Power energy management and control for isolated hybrid pv/energy storages microgrid system. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Zaharin, Ahmad).

Mohd Fauzi, Mohamad Yusof (2014) The economic analysis framework of potential development solar PV energy in Malaysia. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Fawzi, Zamri (2017) Design of cooling channel in hot stamping tool by heuristic approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Yusoff, Ahmad Razlan).

Mohd Hafeez, Ruslan (2009) Response of human bone synthetic under impact loading using experimental method. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hafiz, Ali (2021) Analysis of antioxidant additives-biodiesel blends on engine performance and emission characteristics of a diesel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Adam, Abdullah).

Mohd Hafizi, Zohari (2014) The applications of near infra-red fibre bragg grating sensors for wave propagation based structural health monitoring of thin laminated composite plates. PhD thesis, University of Southern Queensland (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hafizil, Mat Yasin (2018) Investigation on cyclic variations of a diesel engine operating with alcohols and biodiesel blends. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rizalman, Mamat).

Mohd Hafizu, Zakaria (2019) Progressive tool wear in machining biomedical alloy using uncoated and titanium diboride coated tungsten carbide tools. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Haizal, Mohd Husin (2016) Study on copper incorporated mesoporous silica SBA-15 for N2O catalytic decomposition. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hamisa, Abdul Hamid (2023) Characterization, performance and optimization of nanolubricants in automotive air-conditioning with electrically-driven compressor. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Azmi, Wan Hamzah).

Mohd Hanafi, Abdul Rahim (2022) Development design study of heart rate, spo2, and temperature measurement of infant using non-invasive infawrap device. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Azrul Hisham, Mohd Adib).

Mohd Hanafi, Hashim (2020) Properties of oil palm shell lightweight aggregate concrete containing unground palm oil fuel ash as fine aggregate replacement. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hanafi, Muhammad Sidik (2020) Development of a new robust hybrid automata algorithm based on surface electromyography (SEMG) signal for instrumented wheelchair control. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hanafi, Muhammad Sidik (2012) Research on spiral movement robot. Masters thesis, Tokyo, Japan : Takushoku University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hanafiah, Ahmad (2018) The effect of cultural factors on the design and acceptance of assessment centre practices in Malaysian public sector. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Haslizam, Abdullah (2021) Development of an open-architecture temperature data logger for hydro-distillation agarwood oil extractor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hasnun Ariff, Hassan (2012) Design of a dynamometer engine coupling shaft. Masters thesis, Universiti Malaya (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hasnun Ariff, Hassan (2016) Modelling and analysis of soccer heading and protective headgear to understand and prevent mild traumatic brain injury. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zahari, Taha).

Mohd Hasrul Naim, Md. Rahim (2009) Design and analysis a new simple tire nut opener. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hazwan, Abd Latif (2013) Estimation of operational intention and personal adaptation in power assist system. Masters thesis, Toyohashi University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hazwan, Yusof (2015) A study on energy separation mechanism in Ranque-Hilsch vortex tube. PhD thesis, Kagoshima University (Contributors, Thesis advisor: Katanoda, Hiroshi).

Mohd Hefzan, Azmi (2023) Pembinaan modul latihan pengukuhan kepulihan berasaskan psikospiritual islam dan kesannya ke atas ciri-ciri kepulihan orang kena pengawasan (okp). PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Nubli, Abdul Wahab).

Mohd Helmi, Suid (2024) Hybridization of nonlinear sine cosine and safe experimentation dynamics algorithms for solving control engineering optimization problems. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Ashraf, Ahmad).

Mohd Helmi, Suid (2014) Pendekatan baharu penapis median pensuisan untuk pengurangan hingar impuls tahap rendah pada imej digital. Masters thesis, Universiti Sains Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Ikhmil Fadzrizan, Mohd Hanif (2022) Improved PID controller based on piecewise affine function in data driven control framework. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ashraf, Ahmad).

Mohd Iskandar Putra, Azahar (2020) Hybrid fuzzy adaptive control strategies on double acting pneumatic cylinder rod-piston positioning. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Jim, Hamzah (2021) Pembangunan standard pengukuran untuk mengesan gangguan makhluk halus berdasarkan kaedah pengubatan Islam. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Kamal, Kamarulzaman (2021) Engine combustion, performance, and emission characteristics of hermetia illucens larvae oil in a compression ignition engine. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Mawardi, Saari (2015) Development of a highly sensitive ACDC magnetometer utilizing high-Tc squid for characterization of magnetic mixture materials. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Najib, Razali (2011) Adsorption treatment of monoethanolamine (MEA) wastewater from oil and gas industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Mohd Yunus).

Mohd Nasrullah, Zulkifli (2013) Electrocoagulation process using raw sewage for treatment and energy production. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zularisam, Abdul Wahid).

Mohd Nasrullah, Zulkifli (2017) Treatment of palm oil mill effluent by electrocoagulation process. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Nasuha, Ab Halim (2023) Investigation of nickel aluminium bronze (nab) metals cast and its properties. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rashidi, Maarof).

Mohd Nawi, Wan Norlinda Roshana (2018) Carbon dioxide management for product supply chain and total site utilisation and storage. PhD thesis, Universiti Teknologi Malaysia (Contributors, Thesis advisor: Wan Alwi, Sharifah Rafidah).

Mohd Nazir, Mat Nawi (2021) Investigation on paint removal operation using multiple passes in waterjet cleaning process. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Azmir, Mohd Azhari).

Mohd Noor Firdaus, Haron (2021) Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Qayyum Akbar, Abdul Halim (2022) Development and characterisation of lanthanum-based bulk metallic glass (bmg) with localised ductilisation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nik Abdullah, Nik Mohamed).

Mohd Rahimi, Ramli (2022) Kajian kesan diameter dan kepadatan taburan lekuk terhadap pengurangan daya geseran dan kehausan pemukaan keluli aisi 1060. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Shahir, Jamaludin).

Mohd Rashidi, Maarof (2015) Effect of magnesium addition on the microstructure and properties of ductile Ni-resist alloy using in-mould magnesium treatment method. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Rasmawi, Harun (2022) Kewujudan masjid-masjid lama di negeri pahang : satu kajian dan cadangan langkah-langkah pemuliharaan. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Hilmi, Mat Said).

Mohd Razali, Daud (2012) LRF assissted mapping and obstacle avoidance for hexapod robot Comet. PhD thesis, Chiba University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Razali, Hanipah (2015) Development of a spark ignition free-piston engine generator. PhD thesis, Newcastle University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Riduwan, Ghazali (2020) Data driven neuroendocrine pid controller for mimo plants based adaptive safe experimentation dynamics algorithm. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Mohd Ashraf).

Mohd Ridzuan, Darun (2012) The determinants of working capital management practices Malaysian perspective. PhD thesis, Lincoln University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Rizauddin, Deraman (2015) Synthesis and characterization of platinum doped titania and silver doped titania for photo-catalytic degradation of pre-treated palm oil mill effluent. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Rosdi, Salleh (2021) Thermophysical and optimization of performance and emission of turbocharged si engine using gasoline, ethanol and fusel oil blends. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Rusllim, Mohamed (2004) Decision tree-based approach for online management of PEM fuel cells for residential application. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Rusllim, Mohamed (2013) Experimental characterisation and modeling of a vanadium redox flow battery. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Sahril, Mohd Fouzi (2020) Identification of exhaust hanger location based on finite element model updating technique. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Salleh, Abdul Rahim (2020) Nano metal additive enhanced magnetorheological fluid based on rheological and thermophysical properties. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Izwan, Ismail).

Mohd Sapar, Maziah (2013) Keberkesanan kaedah latihan biofeedback emwave terhadap prestasi membaca murid-murid linus di Sekolah Kebangsaan Jengka Batu 13, Chenor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Shafiq, Mohd Sueb (2012) Efficient cultivation of Kluyveromyces Lactis in high cell density culture in fed-batch cultivation system. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Shahridwan, Ramli (2019) Mathematical modelling of wave impact on landward-inclined and seaward-inclined seawalls. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nor Aida Zuraimi, Md Noar).

Mohd Shahril, Abu Hanifah (2021) The prevalence of fatigue and the effectiveness of fatigue risk intervention on safety performance among shift workers in electronics manufacturing industry in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Shahrizad, Ab Hamid (2009) Air-conditioning control system for energy saving application. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nurulhazlina, Noordin).

Mohd Shaiful Azman, Abdul Rahim (2010) Screening and optimisation study on antioxidant extracts from selected lamiaceae plants. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Shamil, Shaari (2014) Fatigue life analysis of natural fibres. Masters thesis, Northern Illinois University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Syafik, Mohamad Hamdan (2022) Characterisation of Malaysian agarwood species (aquilaria malaccensis, aquilaria hirta, and aquilaria beccariana) based on volatile chemical profile and somatic embryogenesis development. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Tajuddin, Saiful Nizam).

Mohd Syafiq, Bachok (2014) Malaysia network transit route adviser: hybrid didistra's algorithm. Masters thesis, Multimedia University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Syafiq, Yusoff (2020) Enhancing flange length in stamping of high strength steel sheets sm520b using stretch flanging method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Syakirin, Ramli (2015) A study on multi-agent systems for stable matching. PhD thesis, Kanazawa University, Japan (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Yashim, Wong Paul Tze (2018) Design analysis and structural optimisation of a rigid ankle foot orthosis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Taha, Zahari).

Mohd Yazid, Abu (2016) Integration of mahalanobis-taguchi system and activity based costing in decision making for remanufacturing. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Zaidi, Sidek (2013) The development of a heat assisted section rolling process for strip. PhD thesis, Imperial College London (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Zainul Abidin, Zakaria (2023) Hubungan kempipinan distributif terhad terhadap efikasi kendiri dan kolektif warga kerja dalam pentadbiran di sekolah-sekolah orang asli daerah Rompin dan Pekan, Pahang. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Hanafiah, Ahmad).

Mohd Zamani, Mohd Nor Peah (2019) Analisis kaedah pembuatan, jasad dan nilai estetika tembikar terenang di Pahang. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Wahab, Muhammad Nubli).

Mohd Zamri, Ibrahim (2014) A novel lip geometry approach for audio-visual speech recognition. PhD thesis, Loughborough University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd. Herzwan, Hamzah (2015) An experimental study on performance of diesel engine operating with waste tire and waste plastic derived fuel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).

Mohd. Shafie, Bakar (2017) Z-source inverter in five-phase system using simple boost pulse width modulation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mok, Ren Hao (2019) Model-free wind farm power production optimization using multi-resolution optimized relative step size random search. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ashraf, Ahmad).

Monir, Md. Minhaj Uddin (2019) Bioethanol production from CO-gasification of lignocellulosic biomass and charcoal. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abd Aziz, Azrina).

Moshood, Taofeeq Durojaye (2020) Factors influencing contractors risk attitudes among Kuantan Malaysian construction companies : the moderating role of government policy. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Most. Julakha, Jahan Jui (2021) Identification of continuous-time model of hammerstein system using modified multi-verse optimizer. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mostafa, Tarek (2020) Photoelectrocatalytic reduction of co2 into methanol over cds modified copper based photocathode. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mousay, Mohammed Mousay (2022) Degradation of glass fibre reinforced polymer (GFRP) composite subjected to different environmental conditions. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Lim, Kar Sing).

Muamer N., Mohammed (2011) An extended access control list for local network protection from insider attacks. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norrozila, Sulaiman).

Muhamad Aiman, Muhamad Azmi (2016) Arduino based SPWM three phase full bridge inverter for variable speed drive application. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daniyal, Hamdan).

Muhamad Fairuz, Ahmad Jasmi (2019) Maritime green supply chain management (MGSCM) and financial performance : a mediating effect of energy efficiency and low carbon performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Yudi, Fernando).

Muhamad Faruqi, Zahari (2016) Intelligent classification of ammonia concentration based on odor profile. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhamad Hadie Aizzat, Asli (2020) Heat transfer performance of single and hybrid water-based nanofluids (Al2O3 and SiO2) in nucleate pool boiling. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhamad Husnain, Mohd Noh (2020) Fatigue crack growth analysis using the bootstrap s-version finite element model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhamad Miziazam, Yahya (2018) Penyelarasan fatwa Pahang dan kebangsaan : kajian kes terpilih 2008-2015. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhamad Nur Kamal, Awang (2016) Workload, roles and staff development in relation to managing library and media in Terengganu. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhamad Zulhilmi, Ismail (2021) Study on effect of abs control system to the vehicle dynamic behavior during braking on various speed and road condition. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Heerwan, Peeie).

Muhammad, Khan (2015) Antioxidant and anti-acetylcholinesterase potential from waste of selected solanaceous plants: isolation and identification of the active compound. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abduelrahman, Azhari Hamid Nour).

Muhammad, Rauf (2012) Design of real time intelligent buses notification system for passengers. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: N Abdalla,, Ahmad).

Muhammad @ S. A. Khushren, Sulaiman (2012) Water level forecasting model using improved artificial neural network architecture. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Adib, Shaharun (2015) Effect of variable helix and pitch tool geometries on process damping performance in endmilling process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Afiq, Mohd Tadza (2018) Study of degradation of cellulose-acetate membrane in osmotic technique for bentonite soil characterisation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Aizat, Azed (2021) Performance of concrete containing microwaved sewage sludge ash as additional material. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Aizzuddin, Abdullah (2019) Development of temperature-insensitive fibre Bragg grating based pressure transducer. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Ameerul Fikri, Romzi (2022) Effect of zinc and molybdenum on the microstructure and corrosion behavior of magnesium-based alloys produced by powder metallurgy technique. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Juliawati, Alias).

Muhammad Amirul, Abdullah (2022) Classification of skateboarding tricks by synthesizing transfer learning models and machine learning classifiers using different input signal transformations. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Majeed, Anwar P.P).

Muhammad Ar Rahim, Ibrahim (2022) The classification of skateboard trick manoeuvres through the integration of inertial measurement unit (imu) and machine learning. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Anwar P.P., Abdul Majeed).

Muhammad Arif, Abdullah (2019) Optimisation of energy efficient Assembly Sequence Planning using Moth-Flame Optimisation alghorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Arif Fahmi, Supian (2019) The optimization of cellulose nanofibre (CNF) production from empty fruit bunch (EFB) using steam explosion pre-treatment. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Asif, Latif (2011) Application of upflow anaerobic sludge blanket (UASB) reactor for food waste and pome treatment with biogas production. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Wahid, Zularisam).

Muhammad Asyraf, Abdullah (2024) Interfacial microstructure growth mechanism of lead-free solder using laser soldering. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Siti Rabiatull Aisha, Idris).

Muhammad Asyraf, Shahrom (2020) Investigation on electric motor braking control system for electric powered wheelchair. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Heerwan, Peeie).

Muhammad Azim Anwar, Noor Hisham (2021) Synthesis and characterisation of graphene and its corrosion resistance on magnesium alloys. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Azizur Rahman, Ramli (2021) Pembangunan model sukuk di Malaysia berasaskan maqasid syariah : rujukan kepada Majallah Ahkam Al-Adliyyah. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mansor, Sulaiman).

Muhammad Azlan, Nazeri (2018) Characterization of bioactive compounds and antibacterial study of pitaya peel extract extracted through microwave assisted extraction method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mat Zain, Norashikin).

Muhammad Aznil, Ab Aziz (2021) Development of wwm system using mlnn-ga for ph prediction of water quality in catchment area. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Bilal, Muslim (2019) Model development and performance analysis of integrated gasification process and proton exchange membrane fuel cell. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noor Asma Fazli, Abdul Samad).

Muhammad Faez, Mohamad Tajudin (2021) The effect of processing parameters on microstructure and mechanical properties of aluminium 6061 semisolid metal billet. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Fahmi Izuwan, Samion (2022) Study of plasma spray aluminum conditions under microwave oven driven on coating characteristics. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Redza, Ahmad Mokhtar).

Muhammad Faisal, Siddiqui (2012) The Anti-Biofouling Effect of Piper Betle Extract on Membrane Biofouling in Bioreactor for Batik Wastewater Treatment. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Farhan, Zolkepli (2018) Slope stabilization influenced by unsaturated soil. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Farhan, Zolkepli (2022) The effect of tree induced suction on slope stability analysis. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fakhrurrazi, Ishak).

Muhammad Fat-Hi Al Juwaini, Pahrol (2020) Bauxite stabilization using gypsum and vermicompost against liquefaction in solid bulk cargoes. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hasan, Muzamir).

Muhammad Firdaus, Masrom (2020) 3D virtual modelling and stabilization control of triple links inverted pendulum on two-wheeled system using enhanced interval type-2 fuzzy logic control. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nor Maniha, Abd. Ghani).

Muhammad Fuad, Abdullah (2021) Frame selection based on modified entropy and object motion for secured data hiding in videos. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ferda, Ernawan).

Muhammad Hafiz, Mazwir (2015) Ketumpatan arus genting antara butiran superkonduktor Bi1.6Pb0.4Sr2Ca2Cu3O10 dalam bentuk pukal dan pita bersarung perak dengan penambahan nanozahrah magnet NiF2, CoFe2O4 dan Co0.5Ni0.5Fe2O4 sebagai pusat pengepinan fluks. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Hanafi, Yusop (2023) Exploring the optimal potential of transient reflection method through mel-frequency ceptrums coefficient and artificial neural network for leak detection and size estimation in water distribution systems. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Fairusham, Ghazali).

Muhammad Hanafi, Yusop (2018) Transient analysis for leak signature identification based on Hilbert Huang transform and integrated kurtosis algorithm for z-notch filter technique. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Hasri, Ibrahim (2009) Thermal response of silicon during virtual laser micromachining. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Hatta, Kassim (2023) Measuring the effectiveness of border crossing management between Malaysia & Thailand with reference to Bukit Kayu Hitam – Sadao and Padang Besar – Padangbasa. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Suhaidah, Hussain).

Muhammad Haziq Adham, Rosli (2021) Investigations of a four-stroke flexible valve timings system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Razali, Hanipah).

Muhammad Hisyam, Abdullah (2020) Case study of particulate matter emission from industrial sources in Teluk Kalung industrial estate, Kemaman, Terengganu. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ali, Mohamad Idris).

Muhammad Ihsan, Abdul Latiff (2019) Experimental analysis and pressureless sintering of powder processed functionally graded nickel alumina plates. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Izhar, Ishak (2016) Improvement of mobility and stability for small electric vehicle : integration of oversteering characteristic, four wheel drive and independent steering. PhD thesis, Tokai University (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Izhar, Ishak (2013) Research on skid control system of small electric vehicle : (the effect of regenerative brake control on in-wheel small electric vehicle with anti-lock brake system). Masters thesis, Tokai University (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Izzat, Zakaria (2023) Design and implementation of flood monitoring and warning system based on internet of things. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noorazliza, Sulaiman).

Muhammad Khairul Anuar , Mohamed (2013) Mathematical modeling for the convection boundary layer flow in a viscous fluid with newtonian heating and convective boundary conditions. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Khalid, Mehmood Sajid (2022) The effectiveness of reading aloud strategies on literal reading comprehension, reading proficiency and text level difficulties. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hafizoah, Kassim).

Muhammad Mukhtar, Noor Awalludin (2020) Micro-explosion phenomenon of tri-fuel emulsion. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ftwi Yohaness, Hagos).

Muhammad Nabil Fikri, Mohamad (2018) Investigation on thermo-physical properties and thermal-hydraulic performance of TiO2-SiO2 nanofluids. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Azmi, Wan Hamzah).

Muhammad Naqiuddin, Mat Salleh (2017) A study on double fillet lap welding of thin sheet AZ31B magnesium alloy by low power fiber laser. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ishak@Muhammad, Mahadzir).

Muhammad Nazrin Akmal, Ahmad Zawawi (2018) Properties of oil palm shell lightweight aggregate concrete containing fly ash as partial sand replacement. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Nazrol, Zawawi (2015) New antenna for milimetre wave radar. PhD thesis, University of Nice Sophia Antipolis (Contributors, Thesis advisor: Migliaccio, Claire).

Muhammad Nor Arifin, Yaakob (2022) Microwave-assisted acetosolv extraction of lignin from empty fruit bunch fibers for fully bio-based formaldehyde-free phenolic thermosets applications. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rasidi, Roslan).

Muhammad Norzaman, Kathiman (2023) Encapsulation of mahkota dewa plant extracts using spray drying technique. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Kholijah, Abdul Mudalip).

Muhammad Nur Aiman, Shapiee (2021) The classification of skateboarding trick images by means of transfer learning and machine learning models. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Nur Arif, Mohamad Asri (2023) Model updating of crash box structures for crashworthiness study. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Shahrir, Mohd Sani).

Muhammad Razif, Abdullah Make (2022) Optimization of two sided assembly line balancing with resource constraint. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Ab. Rashid).

Muhammad Remanul, Islam (2012) Effect of fibre surface treatment on kenaf filled recycled polypropylene composite. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Remanul, Islam (2015) Preparation and characterization of palm oil based polyalkyd films and composites with multi-walled carbon nanotubes. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Ridzuan, Kamaruzaman (2015) Chemical Equilibrium and kinetic study of the esterification of acrylic acid with butanol catalysed by sulfonated expanded polystyrene. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Chin, Sim Yee).

Muhammad Ridzuan, Kamaruzaman (2021) Investigation of reaction parameters and kinetics for the synthesis of sorbitol-branched azelaic acid ester. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Salehan Alhafiz, Mat Wajar (2022) Faktor kesihatan mental, kecerdasan spiritual dan demografi ke atas kebahagiaan hidup dan prestasi akademik pelajar. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rohana, Hamzah).

Muhammad Sawal, A Radzak (2021) Development of robust control scheme for wheeled mobile robot in restricted environment. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Shabir, Shaharudin (2019) Determinants of low carbon supply chain in Malaysian manufacturing industry : practices and its relationship on green supply chain operational performance and low carbon performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Fernando, Yudi).

Muhammad Shahkhir, Mozamir (2022) An improved gbln-pso algorithm for indoor localization problem in wireless sensor network. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rohani, Abu Bakar).

Muhammad Sheraz, Ahmad (2020) Development of phosphorus-doped noble metal (Pt, Pd) electrocatalysts for selective oxidation of glycerol to value added chemicals. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Suhaimi, Man (2013) Production of Bio-Oil from Empty Fruitbunch (EFB) via Pyrolysis Process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Yusri, Ismail (2018) Predicting engine performance and exhaust emissions of a spark ignition engine fuelled with 2-butanol-gasoline blends using RSM and ANN models. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Zabri, Abu Bakar (2018) Development of a computer vision-based technique for analysis of hand therapy exercise. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Zikri, Japri (2022) Noise and vibration analysis in the diesel engine based on biodiesel usage. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Shahrir, Mohd Sani).

Muhammmad Rais, Rahim (2023) Development of a non-inertia mass fibre bragg grating accelerometer based on a single diaphragm mechanism and its vibration response analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Firdaus, Hassan).

Mujahidul Amin, Roslan (2023) Penilaian terhadap gagasan negara islam pas berdasarkan dokumen negara islam 2003. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mansor, Sulaiman).

Mukhtar, Malik (2018) Experimental analysis and optimization of coated and uncoated carbide tool in drilling aisi 316 L austenite stainless steel using minimum quantity lubrication technique. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muna, Jalal Ali (2017) In vitro evaluatinon of oral hygiene commercial products for antimicrobial susceptibility and in combination with the extracts from four spices. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Munira, Abdul Razak (2017) Model mandat rakyat berdasarkan perilaku pengundi, daya saing politik dan sistem penyampaian politik bersepadu. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Nubli, Abdul Wahab).

Munira, Halili (2022) Antecedent and outcomes of sustainable social supply chain practices. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Yudi, Fernando).

Munirah Ezzah, Tuan Zakaria (2019) Synthesis of superabsorbent carbonaceous fibre polymer via inverse-suspension polymerization for NPK coating. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mupit, Datusahlan (2015) Isolation and identification of lipolytic bacteria from galing river water kuantan to degrade waste cooking oil. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Faizal, Wan Ishak).

Murugan, Amarchand Chordia (2018) Study on antioxidant and antidiabetic properties of phloroglucinol from brown macroalgae Padina australis Hauck. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mustafa Mohamed, Mustafa Mahdi (2012) Telecommuting from the company perspective:employer intention to implement telecommuting. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muzamil Ahmed, Zainul Abideen (2020) The integration of supply chain value stream mapping and discrete event simulation for lead time reduction of warehouse operations in a pharmaceutical organization. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muzamir, Hasan (2013) Strength and compressibility of soft soil reinforced with bottom ash columns. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muzamir, Isa (2004) Investigation in fuel cells using ' hydro-genius teach'. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn (Contributors, Thesis advisor: Heinen, Klaus).

N

N., Masngut (2013) A study of butanol production in a batch oscillatory baffled bioreactor. PhD thesis, Newcastle University (Contributors, UNSPECIFIED: UNSPECIFIED).

N. M. Zuki, N. M. (2012) The development of a hybrid knowledge-based system for designing a low volume automotive manufacturing environment. PhD thesis, University of Bradford (Contributors, UNSPECIFIED: UNSPECIFIED).

N. S. M., Shalahim (2016) The relationship between anthropometry and hand grip strength among older Malaysian people. PhD thesis, University of Malaya (Contributors, UNSPECIFIED: UNSPECIFIED).

Nabiilah, Ab Rahim (2018) Quality improvement in electrodeposition process of commercial vehicle using PDCA approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nabilah, Mamat (2021) Effect of chemically pretreated paper mill sludge ash on the properties of geopolymer mortar. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nabilah, Omor (2013) The economic feasibility for commercializing drag reducing agent from cocoa husk. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hayder, A. Abdubari).

Nabilla, Mohamad (2023) Strength properties and acid resistance performance of mortar and concrete using blended cockle shell ash and coal bottom ash. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Khairunisa, Muthusamy).

Nadheer Abdulridha, Shalash (2015) Fuzzy-based multi-agent approach for reliability assessment and improvement of power system protection. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nadhrah, Murad (2021) Microstructural evaluation of sn3.0ag0.5cu solder alloy fabricated via powder metallurgy method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Rabiatull Aisha, Idris).

Nadia, Refat (2022) Impact of utilising a multimedia based tense tool on students’ motivation, cognitive load and language learning experience. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hafizoah, Kassim).

Nadiah, Mokhtar (2021) Biosorption of methylene blue dye using seaweed biomass. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: A. Aziz, Edriyana).

Nafrizuan, Mat Yahya (2016) Bats echolocation-inspired algorithms for global optimisation problems. PhD thesis, The University of Sheffield (Contributors, UNSPECIFIED: UNSPECIFIED).

Nahla Mohammedelzein, Elawad Babiker (2021) Join query enhancement processing (jqpro) with big rdf data on a distributed system using hashing-merge join technique. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mazlina, Abdul Majid).

Nailah, Sa’adah (2015) Application of enzyme-producing bacteria for municipal solid waste biodegradation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Ishak, Wan Mohd Faizal).

Nair, Anju V. (2018) The mathematical modeling of fluid structure interactions with structural buckling. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Najah, Osman (2014) The effect of online teaching approach in enhancing strategic thinking skills for engineering students. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Najahusna, Adnan (2021) Synthesis and characterization of superporous hydrogels by using gas blowing method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Najihah, Yusof (2023) Optimization of propolis ultrasound-assisted extract and identification of its phytochemical and wound healing properties. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Najmi Hafizi, Zabawi (2016) Parking lot detection using tunable two- mode region of interest. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Najwa Wahida, Zainal Abidin (2022) Optimization of multi-holes drilling path using particle swarm optimization. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Ab. Rashid).

Nang Nor Azimah, Long Nadzri (2018) Biosynthesis and optimization of methyl 3-(3,5- di-tert-butyl-4-hydroxyphenyl) propionate production from oil palm frond juice by ceratocystis fimbriata. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Zahari, Mior Ahmad Khushairi).

Naqib Hakim, Kamarudin (2020) Computational fluid dynamic simulation of abrasive waterjet nozzle erosion. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Azhari, Mohd Azmir).

Naser, Mohamed M Muftah (2017) Investigation of pedestrian crossing facilities along Jalan Ampang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nasreldeen Ishag, Obi Kemony (2023) Development of emulsified modified bitumen from industrial waste. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Najib, Razali).

Nasrul Hadi, Johari (2019) Haemodynamics analysis of carotid artery stenosis and carotid artery stenting. PhD thesis, Imperial College London (Contributors, UNSPECIFIED: UNSPECIFIED).

Nasrul Hadi, Johari (2011) The effect of tracheal stenosis on airflow using numerical modelling. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Natassha, Jamil (2019) Immobilization of cyclodextrin glucanotransferase on polyvinylidene fluoride hollow fiber membrane for cyclodextrin production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nayef, Eman Ghanim (2019) Psychological effects of the recitation of the Quran among university students through the investigation of heart rate variability and breathing behaviour. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nazila, Ishak (2019) Boundary layer flow and heat transfer for Maxwell fluid and viscoelastic nanofluid over a stretching sheet. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Salleh, Mohd Zuki).

Nazratul Zaheera, Abdul Kapor (2019) Esterification of palm fatty acid distillate using sulfate based catalysts. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nazriyah, Haji Che Zan @ Che Zain (2016) Intelligent non-destructive classification of josapine pineapple maturity using artificial neural network. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nazrolnizah, Mohamad Noorzeli (2019) Penggunaan teknik biofeedback dalam program peningkatan prestasi diri dan perniagaan usahawan kecil amanah ikhtiar malaysia (AIM). PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nazrotul Afina, Nazri (2019) Dynamic damage assessment of resistance spot welding for dissimilar plates by using model updating approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Neshabran, Ramachandran (2018) Preparation and characterisation of calcium oxide from gypsum based compound for transesterification of waste cooking oil. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ng, Cui Ming (2023) Performance of hot mix asphalt containing glass powder as bitumen modifier. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Ramadhansyah, Putra Jaya).

Ng, Ke Huey (2021) An improved rdwt-based image steganography scheme using qr decomposition and human visual system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Liew, Eric Siau Chuin).

Ng, Kim Hoong (2017) An application of advanced oxidation process to photopolish palm oil mill effluent over TIO2 and ZnO photocatalysts. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Cheng, Chin Kui).

Ng, Zone Fhong (2021) Delineation of flood inundation extent as the result of land use changes in Kuantan River Basin. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Gisen, Jacqueline Isabella).

Ngahzaifa, Ab. Ghani (2012) An evaluation of the potential of adaptive neuro-fuzzy inference system in hydrological modelling and prediction. PhD thesis, University of Nottingham (Contributors, UNSPECIFIED: UNSPECIFIED).

Nguang, Suok Ling (2018) Microwave extraction and microencapsulation of polyphenol from phyllanthus niruri. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jolius, Gimbun).

Nidal Abdelgadir, Ahmed Hamza (2022) Patient flow model using hybrid discrete event and agent-based simulation in emergency department. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mazlina, Abdul Majid).

Nidzamuddeen, Ishak (2016) Energy management practices and implementation in campus building. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Afieza, Che Azhar (2016) Development of a two-stage network data envelopment analysis (DEA) model to analyze production line's performance : combination of automation and labor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Aloesnita, Nik Mohd Alwi (2010) Examining the language learning potential of a task-based approach to synchronous computer-mediated communication. PhD thesis, Victoria University of Wellington (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Fatin Nabilah, Muhammad Nordin (2022) Identification of volatile organic compounds and formulation of white-nest swiftlet (aerodramus fuciphagus) aroma attractant. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Saiful Nizam, Tajuddin).

Nik Kamariah, Nik Ismail (2013) Wood species recognition based on phase - only correlation (POC) technique. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jasni, Mohamad Zain).

Nik Noor Asma, Nik Wil (2019) Chemical constituents and antioxidant activities of Aquilaria malaccensis Lamk. (agarwood) leaves. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Tajuddin, Saiful Nizam).

Nik Nor Aziati, Abd Aziz (2013) Optimization of pre-treatment process of glycerol residue for succinic acid production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Nor Aziati, Abd Aziz (2018) Optimization of succinic acid production from immobilized escherichia coli. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Nurharyantie, Nik Mohd Kamil (2021) A case study in electrical & electronic industry using mahalanobis-taguchi system and time-driven activity-based costing on production environment. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Yazid, Abu).

Nik Nurul Ain, Nik Suki (2013) Age invariant face recogntion system using automated voronoi diagram segmentation. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Nurul Husna, Muhmed Razali (2019) Hybrid energy harvesting of piezoelectric and electromagnetic using vibration excitation of bimorph cantilever beam. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Rohani, Nik Mustapa (2018) Synthesis and characterisation of metal ion-imprinted polymers for separation of selective rare earth elements. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Ruqiyah, Nik Hassan (2020) Mechanical properties and thermal stability of rPET/HDPE plastic composite. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noor Mazni, Ismail).

Nina Farhana, Mohd Jamaludin (2016) Biogas production from poultry manure wastewater using soil mixed culture. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: Zainol, Norazwina).

Nithiya, Arumugam (2012) Improving the flow of petroleum products in pipelines using natural additives and powders. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hyder A., Abdul Bari).

Nitthiyah, Jeyaratnam (2016) A comparative study of cinnamomum cassia (CINNAMON) bark oil extraction through hydrodistillation (HD) and microwave assisted hydrodistillation (MAHD). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdurahman Hamid, Nour).

Noor Adilah, Md Salehan (2018) An integrated ultrasonic-assisted enzymes as a single extraction unit for gallic acid from labisia pumila (kacip fatimah). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ajit @ Abd Aziz, Azilah).

Noor Afifah, Fauzi (2019) Characterization and bioactivities of carboxymethyl cellulase produced by alcaligenes faecalis using disposed x-ray film as the substrate. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Akma, Abu Bakar (2021) Hybrid agent-based and social force simulation for modelling human evacuation egress. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mazlina, Abdul Majid).

Noor Am Zura, Abdullah (2017) Dynamic model updating of body-in-white structure using sensitivity analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Am Zura, Abdullah (2023) Optimisation of car crash box finite element model for crashworthiness analysis using model updating and factorial design method. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Shahrir, Mohd Sani).

Noor Amalina Nisa, Ariffin (2018) Fifth-stage stochastic runge-kutta method for stochastic differential equations. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Ashila, Ramle (2018) Solubility determination of carbamazepine co-crystals in ethanolic solution at various temperature. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Atikah, Mohd Badruddin (2013) Zeolites catalyst from oil palm ash for petrochemical industries. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Faddly , Mohamad (2010) Performance of concrete by using pulverized fuel ash (PFA) as a cement replacement material. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Fadhilah, Ahmad Radi (2018) Spatial modelling of extreme rainfall amount in Kelantan. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Fatihah , Mazlam (2012) Enhancement of stemming process for malay illicit web content. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Intan Shafinas, Muhammad (2011) Computational fluid dynamics of industrial scale spray dryer. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Nabilah, Sarbini (2014) Optimization of steel fibre reinforced concrete as concrete topping in composite slab construction. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Raha, Mohd Radzuan (2013) An analysis of technical oral presentation anxiety in English among engineering students in Universiti Malaysia Pahang. PhD thesis, Universiti Sains Malaysia (Contributors, Thesis advisor: Sarjit, Kaur).

Noor Raihana, Abu Sepian (2021) Immobilization of microalgae Chlorella vulgaris for biomass recovery and fatty acid methyl ester production. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Saadiah, Mohd Ali (2021) Studies on ionic transport and immittance response of carboxymethyl cellulose/polyvinyl alcohol-based solid biopolymer electrolytes and its application. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Sabrina, Ahmad Mutamim (2015) Aerobic submerged membrane bioreactor for spent caustic wastewater treatment. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Suhana, Sulaiman (2019) An enhancement of classification technique based on rough set theory for intrusion detection system application. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Bakar, Rohani).

Noor Suhani, Sulaiman (2023) Antecedents of cyber security behavior: the roles of coping appraisal, threat appraisal and responsibility norms among government employees. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Ashraf, Fauri@Fauzi).

Noor Suraya, Romali (2018) Flood damage and risk assessment for urban area in Segamat. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Syahirah, Nordin (2022) An improved method using fuzzy system based on hybrid boahs for phishing attack detection. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Arfian, Ismail).

Noor Zaihan, Jamal (2019) Omega grey wolf optimizer (ωGWO) for optimization of overcurrent relays coordination with distributed generation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Zakiah, Md Zaid (2018) Mechanical performance of lightweight sandwich structures based on trapezoidal corrugated-cores. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ruzaimi, Mat Rejab).

Noorhafiza, Yahya (2023) Optimization of protease extraction and characterization of protease from syzygium polyanthum as potential meat tenderizer. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Zatul Iffah, Mohd Arshad).

Noorhidayah, Md Nazir (2014) Identification of unique DNA sequences in Aquilaria malaccensis and Aquilaria hirta via genomic representational difference anaylsis (RDA). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noorhuzaimi@Karimah, Mohd Noor (2016) Resolusi anafora artikel Bahasa Melayu berasaskan pengetahuan terhad dan kelas semantik. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Noormazlinah, Ahmad (2010) Production of fructo-oligosaccharides from the enzymatic conversion of coconut sugar catalyzed by fructosyltransferase in a batch reactor. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Noornaziha, Mohd Lazim (2013) Development of experimental bench for characterization of frictional properties of contact lens. Masters thesis, Universität zu Lübeck (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Affaf, Mohd Zainal Abiddin (2020) Development of a network data envelopment analysis (DEA) model to measure the performance of the production line. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Alisa, Mohd Damanhuri (2015) The numerical approximation to solutions for the double-slip and double-spin model for the deformation and flow of granular materials. PhD thesis, University of Manchester (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Amirah Safiah, Muhamad (2022) Development of polyvinylidene fluoride-bentonite membrane in membrane distillation system for treatment of palm oil mill effluent. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nadzirah, Mohd Mokhtar).

Nor Amizam, Jusoh (2011) Segmentation and recognition of Malaysian car plates using Freeman chain codes. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Anis Aneza, Lokman (2017) Fuzzy-logic based gripper design and analysis for objects grasping. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Ashikin, Muhamad Khairussaleh (2016) Fatigue of cable anchorages on a cable-stayed bridge. PhD thesis, The University of Surrey (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Ashikin, Abdul Hamid (2013) Natural dye products business plan. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Nor Atikah, Mat Yusoff (2016) Optimization of pre-treatments of extraction methods for quality of agarwood (Aquilaria malaccensis) essential oil. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Farhana, Hamid (2017) Production of red pigment from oil palm frond using monascus purpureus FTC 5356 in solid state fermentation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Filianie, Aziz (2016) The applicability analysis of performance measurement system for small and medium enterprises in Malaysia. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Hadzfizah, Mohd Radi (2015) Measurement and modeling of hand grip strength and endurance of Malaysian female. Masters thesis, Universiti Putra Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Hanimah, Hamidi (2013) Enzymatic depolymerazation of lignin by laccases. PhD thesis, University of Nottingham (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Hazwani, Aziz (2021) Nutrient enhancement of flooded soil by symbiotic soil fungi. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Hidawati, Elias (2012) Production of succinic acid from glycerol and glycerol waste. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Hidayati, Abdul Aziz (2019) Simulated Kalman Filter algorithms for solving optimization problems. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Ilia Anisa, Aris (2011) Demulsification of water-in- oil (W/O) emulsion by microwave heating technology. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hamid Nour, Abdurahman).

Nor Izzati, Jaini (2017) An Efficient Ranking Analysis In Multi-Criteria Decision Making. PhD thesis, University of Manchester (Contributors, Thesis advisor: V. Utyuzhnikov, Sergei).

Nor Mahirah, Mustapha (2019) Development of business performance indicators framework for small and medium enterprises using Delphi-MCDM technique. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Maniha, Abd Ghani (2006) Active steering for vehicle system using sliding mode control. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Maniha, Abdul Ghani (2015) Modelling and control of a reconfigurable multipurpose wheelchair for elderly/disabled mobility. PhD thesis, University of Sheffield (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Najwafatima, Yusaini (2023) Reduction of work in process and manufacturing lead time using value stream mapping in the medical industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Zubaidah, Ismail).

Nor Rul Hasma, Abdullah (2004) Electron beam sterilization. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Rul Hasma, Abdullah (2012) Computational intelligence based power system security assessment and improvement under multicontigencies conditions. PhD thesis, Universiti Teknologi MARA (Contributors, Thesis advisor: Ismail, Musirin).

Nor Sakinah, Abdul Shukor (2019) Safe experimentation dynamics algorithm for data-driven PID controller of a class of underactuated systems. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Sakinah, Abdul Shukor (2019) Safe experimentation dynamics algorithm for data-driven PID controller of a class of underactuated systems. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Sarahtul Nadirah, Hairol Nizan (2021) Reinforcement and optimization of hydroxyethyl cellulose / poly (vinyl alcohol) with cellulose nanocrystal as a bone tissue engineering scaffold. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Shafiqah, Mohd Nasir (2019) Ethanol CO₂ reforming over Ce and La promoted Cu/A1₂O3 catalysts for syngas production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Su’aida, Yusof (2018) Performance analysis of single phase grid connected for PV inverter using PR controller with different filters. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Syuhaida, Othman (2022) Impedance estimation of single-phase diode bridge rectifier using kalman filter. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hamzah, Ahmad).

Nor Wahidatul Azura, Zainon Najib (2018) Characterisations the bio-active compounds of bio-oil extracted from red meranti sawdust by fast pyrolysis. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ab Wahid, Zularisam).

Nor Yazi, Khamis (2017) Developing a competency framework for practitioners of English for Specific engineering purposes (ESEP). PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor'Aqilah, Misman (2015) Integration of median filter and oriented field estimation for fingerprint identification system. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Noraini, Misran (2012) Penentu kepimpinan berorientasikan pekerja dantugas terhadap kejayaan projek di kalangan kontraktor binaan di kuantan pahang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noraini, Yussof (2023) Water footprint of water supply for industrial sector within kuantan river basin. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Edriyana, A. Aziz).

Norainon, Mohamed (2010) Modelling and switching simulation of gate turn-off thyristor using finite element method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noraishah, Abdul Latip (2022) Utilization of opefb fiber and fly ash from coal power plant reinforced recycle polypropylene for enhancement in flammability and thermal properties of composite production. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Azizul Helmi, Sofian).

Norashikin, Mat Zain (2014) Development of antimicrobial fabrics based on silver and copper nanoparticles. PhD thesis, Loughborough University (Contributors, UNSPECIFIED: UNSPECIFIED).

Norasiha, Hamid (2011) Inclusion complex formation between natural dye extracted from pitaya fruit skin and β-cyclodextrin : kinetic and thermodynamic study. Masters thesis, UNIVERSITI MALAYSIA PAHANG (Contributors, UNSPECIFIED: UNSPECIFIED).

Norasiha, Hamid (2017) Dyeing adsorption kinetics of ebtacyanin pigment extracted from hylocereus polyrhizus peel onto spun silk and acrylic yarn. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norasmiza, Mohd (2023) Parameter investigation of passive to semi active cooling technique for house in tropical climate. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zubair, Khalil).

Norasyidah, Harun (2014) Antioxidant Activities of Extracts from Plants in Minor Uses: Parkia Speciosa, Vitex negundo, and Etlingera elatior. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abduel Rahman, Azhari Hamid Nour).

Norasyikin, Ismail (2015) Syngas production from microwave plasma gasification of oil palm char. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Noratiqah, Chik (2021) Mitigation of bacterial adhesion on metal surfaces by surface roughness modification. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Salwanis, Wan Md. Zain).

Norayuni, Azizi (2016) Study on thermal, water barrier and mechanical properties of polyurethane clay nanocomposite prepared by solution intercalation method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norazaliza, Mohd Jamil (2015) Mathematical modeling and simulation of biofuel production from lignocellulosic biomass. PhD thesis, University of South Carolina (Contributors, UNSPECIFIED: UNSPECIFIED).

Noraziah, Ahmad (2007) Managing replication and transactions using neighbour replication on data grid. PhD thesis, Universiti Malaysia Terengganu (Contributors, UNSPECIFIED: UNSPECIFIED).

Norazian, Subari (2014) Development if intelligent classifier and estimator for tualang honey purity. Masters thesis, Universiti Sains Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Norazila, Jaalam and Ahmed Mohamed, Ahmed Haidar and Noor Lina, Ramli and Nor Laili, Ismail (2011) A neuro-fuzzy approach for stator resistance estimation of induction motor = pendekatan neuro-fuzzy untuk meramal rintangan stator pada motor induksi. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norazimah, Harun (2017) Glycerol dry reforming for syngas production over ag-promoted on ni-based catalysts. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norazlin, Ahmad (2022) Examining the impact of ceo power in the ownership-sustainability nexus: evidence from malaysian public listed firms. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ting, Irene Wei Kiong).

Norazlina, Hashim (2020) Thermal and biodegradable properties of poly(lactic acid)/ carbon-based nanocomposites. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norazmira Wati, Awang (2021) Study oil thermal-physical properties for nanocellulose nanoparticles for sae40 engine oil for tribological behaviour. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noraznafulsima, Khamshah (2013) Fuzzy temperature compensation scheme for hot wire mass airflow sensor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norazura, Ismail (2011) Risk management of neurobehavioral health of tyre manufacturing industry workers exposed to naphtha. PhD thesis, Universiti Putra Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Norbaizurah, Rahman (2015) Effects of chemical reagents on the properties of fly ash based geopolymer. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norbaizurah, Rahman (2018) The combined effect of dipotassium hydrogen phosphate and paper mill sludge ash towards formation of efflorescence and properties of fly ash geopolymer mortar. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norfadzilah, Jusoh (2016) Analysis of the effect and responsiveness of physiology factors on thermal comfort in an air-conditioned environment. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Bakar, Rosli).

Norfariza, Ab. Wahab (2012) Estimation of corrugated cardboard strength with a new tensile or shear test method. Masters thesis, Nagaoka University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Norfariza, Ab. Wahab (2015) Modeling of cutting process and flow stress under high strain rate. PhD thesis, University of Agriculture and Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Norfatihah, Ismail (2022) Study on the mechanical behavior of silica nanoparticle reinforced magnesium bio-nanocomposite. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nafrizuan, Mat Yahya).

Norfatihah, Mazuki (2020) Ionic conductivity study on carboxymethylcellulose blended with polyvinyl alcohol incorporated with ammonium bromide based solid biopolymer electrolytes as application in electrochemical device. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Salihin, Samsudin).

Norhafidzah, Mohd Saad (2021) Optimal planning of photovoltaic distributed generation considering uncertainties using monte carlo pdf embedded MVMO-SH. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhafizah, Md Sarif (2018) Mathematical modelling of convective flow over a horizontal circular cylinder with convective boundary conditions in viscous, micropolar and nanofluid. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Zuki, Salleh).

Norhafzan, Bariman (2020) Laser surface melting to enhance surface properties in hot press forming die. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah Nur Aqida, Syed Ahmad).

Norhafzan, Junadi (2020) Fabrication and characterization of microcrystalline cellulose from oil palm empty fruit bunch fiber reinforced polylactic acid composites. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhafzan, Junadi (2012) Medium-density fibreboard (MDF) from oil-palm fronds. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ghazi Faisal, Najmuldeen).

Norhaiza, Ghazali (2010) Development of terrain height multipliers and roughness lengths for Seberang Perai reogion. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhaiza, Nordin (2014) Pembangunan satu sistem bangunan berindustri (IBS) - lantai pasang siap sistem kepingan keluli berprofil papan kering. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhana, Mohd Aripin (2023) Sustaining factors for lean manufacturing excellence : an explanatory mixed methods study. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Suhaidah, Hussain).

Norhaslinda, Nordin (2019) Organisasi pembelajaran : satu kajian kes di syarikat makanan halal. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhasmira Idayu, Harun (2019) The assessment of river water quality in Kuantan. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhayati, Rosli (2012) Stochastic Runge-Kutta method for stochastic delay differential equations. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhazimah, Abdul Halim (2012) Identification and optimization of process parameters for the production of bioethanol from the fermentation of oil palm trunks SAP. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhazimah, Abdul Halim (2016) Optimization of bioethanol production from oil palm trunk sap. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhidayah, Haji Mohamad Nawawy (2021) Penghayatan akidah transgender mak nyah muslim melalui amalan taubat Imam Al-Ghazali. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhidayah, Muhammad (2015) Enhance key generation algorithm based user string identity as public key. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norida, Ridzuan (2016) Experimental investigation and modelling of wax deposition inhibition in pipeline transportation of crude oil. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noriyani, Mohd Zin (2012) A novel deadlock detection algorithm for neighbour replication on grid environment. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noraziah, Ahmad).

Norizam, Sulaiman (2015) Determination and classification of human stress index using non-parametric analysis of EEG signals. PhD thesis, Universiti Teknologi MARA (Contributors, Thesis advisor: Taib, Mohd Nasir).

Norizan, Yusof (2019) Keberkesanan intervensi modul integrasi spiritual dan biofeedback dalam psikoterapi berasaskan badan bagi pelajar bermasalah di institut latihan teknikal. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Nubli, Abd Wahab).

Norlaili, Hashim (2019) Microwave assisted extraction (MAE) of beta-sitosterol from plant legumes pod. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noormazlinah, Ahmad).

Norlia, Muhamad (2017) Extraction of selected bioactive compounds from averrhoa bilimbi and their thermal stability during spray drying. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norliana, Munir (2021) Studies on local mango- and noniderived milk curds and their biological activities. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norlida, Jamil (2015) Electromagnetic force generation for dynamic modal testing applications. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norlida, Jamil (2023) Indirect monitoring of surface quality based on the integration of support vector machine and 3D I-kaz techniques in the machining process. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Ahmad Razlan, Yusoff).

Norlinda, Mohd Rozar (2012) The effectiveness of e-learning training in industrial safety and health:a case in FCM company. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norlirabiatuladawiyah, Che Ani (2018) Synthesis and characterization of superabsorbent carbonaceous coated nitrogen phosphorus potassium (NPK) fertilizer. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norlisa, Harruddin (2020) Fabrication of hybrid graphene-polyethersulfone supported liquid membrane for acetic acid removal from oil palm frond biomass hydrolysate. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norliyana, Erain (2019) Computational fluid dynamics study of air pollutant dispersion around Kuantan. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Gimbun, Jolius).

Norliza, Ishak (2015) Development of multivariate statistical process monitoring using combination MLR-PCA method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Normaniha, Abdul Ghani and Raja Mohd Taufika , Raja Ismail and Nurul Hazlina, Noordin and Mohd Ashraf, Ahmad (2011) Trajectory tracking control of two wheels mobile robot = trajektori kawalan penjejakan sistem robot dua tayar. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nornasuha, Abdullah (2019) Utilization of palm oil fuel ash (POFA) as silica source of Ni/SBA-15 for CO2 reforming of CH4. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norrihan, Sulan (2011) A corpus-based study of morphological productivity of English language chemical engineering textbooks. PhD thesis, Universiti Teknologi Mara (Contributors, UNSPECIFIED: UNSPECIFIED).

Norsafiah, Fazli (2022) Development of attached growth microbial fuel cell (ag-mfc) for treatment of spent caustic wastewater and energy recovery. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah, Abd Rahim).

Norshafariza, Mamat (2023) Masalah pembelajaran matematik dan hubungan dengan skor hrv dalam kalangan pelajar sekolah rendah. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Nubli, Abdul Wahab).

Norsyahida , Mohammad (2010) Producing hydrogen from seawater electrolysis. Masters thesis, RMIT University (Contributors, UNSPECIFIED: UNSPECIFIED).

Norul Afwan, Kamarudin (2016) Molecular dynamic simulation of patchoulol biotransformation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Fatmawati, Adam).

Norul Amalina, Sabri (2017) Biotransformation of benzyl acetone using saccharomyces cerevisiae, aspergillus niger, pseudomonas aeruginosa, enterococcus faecalis and bacillus cereus. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norul Amierah, Nor Zamani (2020) Study on the mechanical and tribological behaviour of Al/Al2O3/Gr hybrid metal matrix composite produced by powder metallurgy. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norul Wahida, Kamaruzaman (2019) Synthesis of graphene sand composite by using arenga palm and table sugar to remove methylene blue and nickel from aqueous solution. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noryanti, Muhammad (2016) Predictive inference with copulas for bivariate data. PhD thesis, University of Durham (Contributors, UNSPECIFIED: UNSPECIFIED).

Nugroho , Dewayanto (2010) Waste to valuable by product - utilization of carbonised decanter cake from palm oil milling plant as an effective adsorbent for heavy metal ions in aqueous solution. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nugroho, Dewayanto (2015) Utilisation of decanter cake from palm oil milling plant as new substrate for the production of bio-oil through catalytic vacuum pyrolysis. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur, Cholis (2013) Electro-mechanical single acting pulley rubber V-belt continuously variable transmission (EMSAP RVB-CVT) for scooter. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Afikah, Khairi @ Rosli (2022) Study of the functional 3d heart model using soft materials flexible thermoplastic polyurethane (TPU FLEX SHORE 95 A) and elastic photopolymer resin (EPP SHORE 40 A) for cardiovass monitoring device. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Azrul Hisham, Mohd Adib).

Nur Afiqah, Mohd Radzi (2021) A study on decision criteria for assessing construction readiness of highway projects. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Doh, Shu Ing).

Nur Aidah Nabihah, Dandang (2019) Microstructures and properties of CoCrMo alloy by metal injection moulding process. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Sharuzi, Wan Harun).

Nur Aima Syairah, Mohd Abdul Alim (2017) Ultrasound and enzymatic mediated extraction of vitexin and isovitexin from ficus deltoidea leaves. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Ain Farhana, Ghani (2017) Rapid extraction of fertilizer from palm oil mill effluent (POME) using Magnesium Ammonium Phosphate (MAP) precipitation method and Fe-Chloro Polyacetamide (FeCP) electrolyte system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Aisyah Syafinaz, Suarin (2020) Extended bat algorithm for PID controller tuning of wheeled mobile robot and swarm robotics target searching strategy. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Alya Afikah, Usop (2024) A framework of enhanced authentication for PDF textual documents using Zigzag-LSB embedding algorithm. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Syifak, Izhar Hisham).

Nur Amalina, Ramli (2023) Molecular interaction and mechanism of cellulose as thickening and reinforcement agent in carrageenan biocomposite for hard capsule. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Fatmawati, Adam).

Nur Amalina, Sabuan (2021) Investigation on the effect of sintering temperature and composition of titanium (Ti) on electrical conductivity of al2o3/zro2/ti ceramic composites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mebrahitom Asemelash, Gebramariam).

Nur Amalina, Ahmad (2014) Chemical composition, antioxidant and antibacterial activity of essential oil from leaf of syzygium polyanthum (wight) walp. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Govindan, Natanamurugaraj).

Nur Aqidah, Muhammad Harinder Khan (2019) The evaluation of premixed biogas/air explosion characteristics in a 20 L closed vessel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Aqilah, Othman (2016) Covariance matrix analysis in simultaneous localization and mapping. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Hamzah).

Nur Ashikin, Usri (2016) Investigation of forced convection heat transfer for Al2O3 nanofluids in different base mixture. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Athirah, Badrulhisham (2021) Monitoring of aircraft noise level on residents nearby Malaysian airport. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nurul Shahida, Mohd. Shalahim).

Nur Athirah, Mohamad Radzi (2022) Optimisation of recycled polypropylene reinforced with oil palm empty fruit bunch (opefb) and fly ash for enhancement of thermal and flame-retardant properties. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Azizul Helmi, Sofian).

Nur Athirah, Sabarudin (2018) Extraction of betacyanin from Bougainvillea glabra bract and the adsorption onto fibres. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Atiqah , Ramlan (2015) A study on diesel engine performance using biodiesel from waste cooking oil (WCO). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Azzimah, Zamri (2021) Properties of high strength palm oil clinker lightweight aggregate concrete containing palm oil fuel ash as partial cement replacement with inclusion of 1% sika visco-crete®-2199. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Balqishanis, Zainal Abidin (2020) The effect of intangible factors on innovation capabilities in higher education institutions. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Bazilah, Thalib (2021) Mechanical and thermal properties of graphene oxide reinforced acrylated epoxidised palm oil/unsaturated polyester resin. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Noor Hidayah, Mustapha).

Nur Dini, Johari (2019) Production, optimization and characterization of L-glutaminase from marine bacteria. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Dini, Mat Jusoh (2019) Production of fructooligosaccharides (FOS) by enzymatic reaction from phytoenzyme of ananas comosus waste. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Eliza, Badrul Hisham (2021) Enhancement of nitrogen uptake in palm oil-based compost by using rice husk ash (RHA) for Chinese kale’s growth. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Elya Haniza, Zamiruddin (2022) Measurement of lubricant oil film thickness under minimum quantity lubrication milling process. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nurrina, Rosli).

Nur Ezreen, Jasni (2022) Physical and mechanical characteristics of porous asphalt mixture incorporating kenaf fiber. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Khairil Azman, Masri).

Nur Ezyan, Badrul Hisham (2020) Composting process by using palm oil mill effluent (POME) aerobic sludge, decanter cake and rice husk ASH. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ramli@Said, Nor Hanuni).

Nur Faeeza, Abdul Halim (2023) Parameter study on low temperature vacuum drying with induced nucleation boiling for dewatering stingless bees honey. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohamad Firdaus, Basrawi).

Nur Fahriza, Mohd Ali (2016) Identification of trigger levels at equilibrium condition for transport mode choice : case study at Klang Komuter Station. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Fakhriah, Mohd Noordin (2020) Study of different fillers on aluminium alloys 6061 and 7075 by MIG welding. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Farahain, Khusnun (2013) Jatropha oil based bio-adhesive for plywood application. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md Maksudur, Rahman Khan).

Nur Farahaina, Idris (2022) Classification of breast cancer disease using bagging fuzzy-id3 algorithm based on fuzzydbd. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Arfian, Ismail).

Nur Farha, Shaafi (2021) Theoretical and experimental investigations of lead chalcogenides quantum confined structures for solar cell application. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Farizah Diana, Abdul Razak (2020) Vibration analysis and noise mapping of automotive radiator system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Fathin Shamirah, Daud (2021) Optimization and kinetic study of pigments production on solid state fermentation using oil palm frond by monascus purpureus ftc 5357. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Fatihah, Mohd Roslan (2022) Effect of swirling flow on Fluidised bed drying of piper Nigrum: an experimental study. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmmad Shukrie, Md Yudin).

Nur Fauziah, Jaharudin (2015) Analysis of particulate matter emission in diesel engine operated with waste cooking oil biodiesel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).

Nur Fazlinna, Ab Ghani (2023) Degradation study of polylactic acid/graphene nanocomposites by using accelerated weathering. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Shaiful Zaidi, Mat Desa).

Nur Fazrina Mohamad, Salleh (2019) Ergonomic assessment of musculoskeletal symptoms and associated risk factors among pineapple plantation workers. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Hairunnisa, Kamarudin (2019) Modelling and optimisation of assembly line balancing problem with resource constraint. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Ab. Rashid).

Nur Hanani, Rushan (2021) The cultivation of immobilized chlorella vulgaris in different culture medium for biodiesel production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Hatipah, Ibrahim (2021) Dilute acid hydrolysis pretreatment process of meranti wood sawdust using aspen plus. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Hazirah Huda, Mohd Harun (2019) Physicochemical properties changes on Malaysia’s biomass torrefaction and development of torrefaction correlation model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Hidayah, Mat Yasin (2014) Membrane technology in microalgae harvesting for biofuel production. PhD thesis, Universiti Sains Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Hikmah, Semawi (2020) Investigation of the thermal behaviour and dust explosion characteristics of tea powder. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Zubaidah, Sulaiman).

Nur Huda, Ramlan (2017) Interconnection and damping assignment passivity based controller for multilevel inverter. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Iffah, Mohamed Azmi (2014) Optimization of PID parameters for hydraulic positioning system utilizing variable weight Grey-Taguchi and particle swarm optimization. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Izzati, Pakhor Anuar (2022) Integrated process knowledge management system based on risk based process safety in petrochemical industries. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hanida, Abdul Aziz).

Nur Izzati Khoirunnisa, Ismail (2022) Experimental study of oil film thickness on workpiece under minimum quantity lubrication milling process using laser induced fluorescence method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nurrina, Rosli).

Nur Khaleeda, Romli (2023) Effect of geometrical size and number of core on bending behaviour of web-core sandwich structure. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Ruzaimi, Mat Rejab).

Nur Khaleeda, Romli (2018) Quasi-static and low-velocity impact response on fibre metal laminate. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Khalidah, Zainuddin (2019) Study on ionic conduction of carboxymethyl cellulose-kappa carrageenan blend for solid biopolymer electrolytes. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Liyana, Zulkifle (2018) Antidiabetic activity of aquilaria malaccensis (agarwood) leaves extracts. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Tajuddin, Saiful Nizam).

Nur Muhitul Jalilah, Rasali (2019) A study on ionic conductivity of alginates doped with ammonium nitrate as application for solid biopolymer electrolytes. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Samsudin, Ahmad Salihin).

Nur Muneerah, Kasim (2023) The impact of social media at work on job performance among government employees : perspective from the stress-strain-outcome and social capital theory. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Ashraf, Fauzi).

Nur Nabillah, Mohd Arif (2017) Dry reforming for glycerol hydrogen-rich production over Ni/CaO, Ni/ZrO2 and 5%Re-Ni/CaO. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Nadia, Mohd Zakaria (2023) Biotransformation of soluble starch to cyclodextrin using immobilized recombinant escherichia coli on hollow fiber membrane. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Rohaida, Che Man).

Nur Salsabila, Ahmad Roslan (2020) Chemical constituents isolated from the ethyl acetate extract of the roots of garcinia atroviridis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zamri, Normaiza).

Nur Shafiza Afzan, Sharif (2015) Synthesis and characterization of lead Zirconate Titanate (Pb[Zr0.52Ti0.48]O3) properties via high energy planetary ball milling. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Soliha, Sahimi (2020) Business sustainability practice (BSP) profile assessment in Malaysia economic sectors using K-mean clustering approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Turan, Faiz).

Nur Suhaila, Anang Japar (2020) The formulation of lubricating grease from waste transformer oil. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Sukinah, Aziz (2019) The extension of website usability model and its evaluation criteria for Malaysia higher education institution. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Syafiqa Nabila, Muhamad Amin (2023) Impact of leadership styles on employees’ turnover intentions with work stress and job dissatisfaction as moderator among building construction project in Selangor. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nurhaizan, Mohd Zainudin).

Nur Syafiqah, Mohd Nafis (2016) Customer churn classification in telecommunication company using rough set theory. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Makhtar, Mokhairi).

Nur Syafiqah, Mohd Nafis (2022) The hybrid feature selection technique using term frequency-inverse document frequency and support vector machine-recursive feature elimination for sentiment classification. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Suryanti, Awang).

Nur Syafiqah Shamimi, Mohd Zali (2022) Performance of stone mastic asphalt incorporating nano titanium modified asphalt binder. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Khairil Azman, Masri).

Nur Syahirah, Kamarudin (2019) Preparation of silver nanoparticles in aromatic leaves extract and ionic liquid for photodegradation of 2,4– dichlorophenoxyacetic acid. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Syahirah, Mohd Sabli (2021) Wireless monitoring and arima stream analytics system for freshwater lobster farm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Faizal, Jamlos).

Nur Syamilah, Arifin (2019) Two-phase mixed convection flow over a vertical stretching sheet with aligned magnetic field and newtonian heating. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Syarmim, Mohamed Noor (2016) Preparation of Safranine O immobilized acrylic Microspheres and Cobalt (II) ion immobilized Microsilica for optical detection of nitrogen compound. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Syazana, Muhamad Nasrah (2019) Biosynthesis of biobutanol from oil palm frond juice by Clostridium acetobutylicum. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Zahari, Mior Ahmad Khushairi).

Nur Syazwani, Mohd Noor (2019) An assessment of driving seating comfort based on natural fiber material by using digital human modelling and pressure mapping technique. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ghazalli, Zakri).

Nur Yani, Che Hussin (2023) Kesan teknik tafakur terhadap keadaan emosi negatif dan kebolehubahan kadar degupan jantung dalam kalangan mahasiswa. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Nubli, Abdul Wahab).

Nur Zahirah, Mohd Ali (2013) Adaptive Embedded Clonal Evolutionary Programming (AECEP) for optimal Distributed Generation (DG) location and sizing in a distribution system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zulkeflee, Khalidin).

Nurainaa, Elas (2021) An application of modified adaptive bats sonar algorithm (MABSA) on fuzzy logic controller for dc motor accuracy. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mat Yahya, Nafrizuan).

Nuraini, Mansor (2012) Optimization and chemical demulsification of crude oil emulsions. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdurahman, Hamid Nour).

Nuramira Fateha, Sukor (2019) Ultrasonic–probe assisted extraction of phenolic acids in ionic liquid from quercus infectoria galls. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurasilah, Khamar Ludin (2022) Evaluation of electric field for electrode of a pulse electroacoustic (PEA) equipment. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Amir Izzani, Mohamed).

Nuraziliana, Muhd Ghazali (2023) Study on the ionic conduction properties of alginate-poly (vinyl alcohol) doped ammonium nitrate based bio-polymer blend electrolytes. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Salihin, Samsudin).

Nurazima, Ismail (2023) Lamb wave based structural health monitoring using fibre bragg grating-based intrinsic fabry-perot interferometer sensor. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Hafizi, Zohari).

Nureen, Noordin (2020) Performance study on release behaviour of controlled release and water retention fertilizer coated with superabsorbent polymer-biochar incorporation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurhafizah, Abu Talip (2016) Fabrication on antireflection-structured film by ultraviolet nanoimprint lithography and its mold lifetime amelioration. PhD thesis, Tokyo University of Science (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurhanis Sofiah, Abd Ghafar (2017) Synthesis, characterization and modelling of nickel nanowires synthesized via template-assisted electrodeposition. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurhanis Sofiah, Abd Ghafar (2021) Thermophysical properties of stabilized copper oxide-polyaniline-palm oil based nanofluids. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurhidayah, Mahazam (2017) The compatibility of osmotic and vapour equilibrium techniques in establishing soil-water characteristics curve : a case study for bentonite. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nuri'Adilah Nashrulmillah, Idris (2018) Optimization of gallic acid yield from labisia pumila in 25-L mobile pilot scale extractor via ultrasound-assisted extraction. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurizzathanis, Mohamad Kusaseh (2020) Investigation on mechanical properties of glass fiber reinforced polyamide 6-polypropylene composites under different operating conditions. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Dewan Muhammad, Nuruzzaman).

Nurizzati, Md. Nizam (2019) Characterization and performance analysis of multi-stack vanadium redox flow battery. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamed, Mohd Rusllim).

Nurizzatul Atikha, Rahmat (2013) Prediction of maximum strain and strain rate in SHPB specimens based on energy analysis. Masters thesis, Japan , Okayama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurmadiha, Osman (2021) Evaluation of arima and ann stream analytics for air quality monitoring system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurmaryam Aini, Hashim (2019) Optimisation and molecular dynamics simulation of mangiferin from mahkota dewa (Phaleria macrocarpa) extract in subcritical water extraction process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurnajmin Qasrina Ann, Ayop Azmi (2018) Simulated kalman filter (SKF) based image template matching for distance measurement by using stereo vision system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurnajmin Qasrina Ann, Ayop Azmi (2023) A new hybrid deep neural networks (DNN) algorithm for Lorenz chaotic system parameter estimation in image encryption. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohammad Fadhil, Abas).

Nurrina, Rosli (2011) Measurement of liquid film flow on inclined wall using photochromic dye marking method. Masters thesis, Gunma University (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurrina, Rosli (2015) Observation of free surface flow behavior using laser tagging method by photochromic dye tracer. PhD thesis, Gunma University (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurshafiqa Saffah, Mohd Sharif (2018) Learner’s emotion prediction using production rules classification algorithm through brain computer interface tool. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rahmah, Mokhtar).

Nursofia, Mohd Yunus (2018) Study on the kinetics of cation exchange resins as catalysts in free fatty acid (FFA) esterification of simulated used cooking oil. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Afiqah, Zainal (2017) Investigation of maximum power point tracking (MPPT) for active cooling mono-crystalline photovoltaic panel using fuzzy logic controller. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Ain, Ismail (2023) Extraction of samarium, europium And gadolinium using [trialkylammonium][di-(2- Ethylhexyl) phosphate]. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Aizudin, Abdul Aziz).

Nurul Ain, Jalanni (2015) Synthesis,characterization and performance of triethanolamine-based thin film composite nanofiltration membrane. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Ain, Johari (2021) Stainless steel 316lhydroxyapatite composite via metal injection moulding : properties study. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Ain, Jumri (2018) Effect of different extraction conditions on the production of anthraquinone. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Ain, Manshor (2018) Structural and optical characterizations of methyl ammonium lead halide perovskite embedded polymer films. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Ain, Mohamed Razali (2014) Synthesis, characterization and catalytic performance of Cu/ZnO/SBA-15 for hydrogen of carbon dioxide to methanol. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Ain, Mohd Yusoff (2017) Turbine blade design for tidal barrage system and simulink model in electricity generation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Ain, Ramli (2013) Synthesis and characterization of Ni and Pd nanoparticles in natural rubber latex and their catalytic activity for hydrogenation of latex. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: MOHD.RIDZUAN, NORDIN).

Nurul Ain, Zainodin (2017) The environmental impact of polycyclic aromatic hydrocarbons in the sediment river. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Ain Fatehah, Baharuddin (2019) Pembangunan modul transformasi kepimpinan diri pelajar luar kampus (TKDPLK) Universiti Malaysia Pahang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Aishah, Mazlan (2020) Production of xylooligosaccharides from lignocellulosic biomass using enzymatic hydrolysis. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Akma, Reduan (2018) Synthesis and characterization of silver nanoparticles filled epoxy composite. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Amira, Ahmad Yusof (2020) Synthesis and characterization of chitosan/zinc oxide nanoparticles for antibacterial activity. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Amiratul, Johari (2023) Interaction of self-healing epoxy coating and microencapsulated inhibitor for the corrosion protection of magnesium alloys. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Juliawati, Alias).

Nurul Ashikin, Abdul Karim (2014) Antibacterial and antihypertensive properties of crude extract of in vitro callus culture of muskmelon (cucumis melo l.). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Govindan, Natanamurugaraj).

Nurul Asmawati, Roslan (2017) Esterification of free fatty acid in used cooking oil using sulphonated hypercrosslinked exchange resin as catalyst. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Atikah, Mohd Rodzri (2021) Optimization of xylonic acid production using recombinant e. coli bl21 (de3) with inserted gene from ralstonia pickettii. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Azwa, Othman (2017) Modified hysteresis current controller of half bridge bidirectional DC-DC converter using chassis dynamometer for electric vehicle. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hamdan, Daniyal).

Nurul Azwan, Adnan (2009) Material selection in mechanical design of car bumper. EngD thesis, University Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Fadzlina, Jamin (2020) Interval type-2 fuzzy logic control optimize by spiral dynamic algorithm for two-wheeled wheelchair. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Farahin, Zamrud (2021) A comparative study of activitybased costing (abc) and time-driven activity-based costing (tdabc) on cost accounting. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Yazid, Abu).

Nurul Farhana, Abu Kasim (2021) Synthesis of graphene by pullulan-assisted exfoliation of graphite using ultrasonic bath. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Farhana, Nasarrudin (2018) Relationship between number of crashes and the factors in the environment of urban signalised intersections. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Fatehah, Abdul Ghafar (2012) Pencirian pencilan bakteria anaerob selulolitik dan ligninolitik dalam biodegradasi sisa batang pisang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Fatiehah, Adnan (2016) Leak detection in gas pipeline based on time-frequency analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd. Fairusham, Ghazali).

Nurul Fatihah, Mahamad Roli (2018) Separation of xylose from glucose in oil palm frond (OPF) bagasse hydrolysate using nanofiltration membrane system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Hajar, Embong (2016) Preparation of biodiesel from oil palm industrial waste using sulphated heterogeneous catalyst. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Haslin, Adnan (2013) Business Plan for the Production of Fructo-Oligosaccharide. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Munaim, Mimi Sakinah).

Nurul Hazlina, Noordin (2013) Adaptive array antenna design for wireless communication systems. PhD thesis, University of Edinburgh (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Hazreen Wanie, Hazmo (2020) Effect of zeolitic imidazolate framework-8 and multi-walled carbon nanotube on the performance of pvdf membrane. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Hazwani, Sabri (2017) Controllability study on multi-vessel batch distillation column based on level control scheme. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hisyam, Anwaruddin).

Nurul Hidayah, Muhamad @ Ghazali (2015) Development of limestone based catalyst for biodiesel production from waste cooking oil. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Hidayah, Othman (2018) Effect of shoulder to pin diameter ratio on mechanical and microstructural properties of friction stir welded magnesium alloy AZ31B. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Hidayah, Razak (2012) Machining characteristics of hastelloy c-2000 in end milling using artificial intelligence approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Mustafizur, Rahman).

Nurul Hidayah, Razak (2017) Modes and progression of tool deterioration and their effects on cutting force during end milling of 718plus Ni-based superalloy using cemented WC-Co tools. PhD thesis, Auckland University of Technology (Contributors, Thesis advisor: Zhan, Chen).

Nurul Husna, Zakaria (2018) Ergonomics study on workers in electrical industry by using simulation analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Husna Elyana, Hanifa (2021) Properties of nickel-supported palm oil fuel ash (Ni-POFA) catalyst produced via in situ glycine-nitrate combustion for methane cracking. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Izwanie, Rasli (2015) Fabrication of chromatographic membrane via surface-grafted membrane for protein separation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Izzah, Ab Rahim (2020) Crash performance of polyurethane foam-filled aluminium column. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Salleh, Salwani).

Nurul Izzah, Mohd Shah (2018) The effects of logistics-related knowledge management of courier service provider on e-business performance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Izzatie Husna, Muhamad Fauzi (2023) Midrange exploration exploitation searching particle swarm optimization with HSV-template matching for crowded environment object tracking. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Zalili, Musa).

Nurul Jannah, Baharuddin (2022) Study on die shoulder patterning method (DSPM) onto minimizing springback of u-ending. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Rosli, Abdul Manaf).

Nurul Kamariah, Md Saiful Islam (2020) Effect of selective laser melting process parameters on properties of 316L stainless steel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Khairiyyah, Mohd Zain (2015) Synthesis and characterization of activated carbon from palm kernel shells for electrochemical double layer capacitor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Nabila Huda, Baharudin (2023) Immobilization of escherichia coli producing β-cyclodextrin glucanotransferase on hollow fiber membrane for β-cyclodextrin production. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rohaida, Che Man).

Nurul Nadia, Mohd Zawawi (2021) Performance of automotive air conditioning system using al2o3-sio2 nanolubricants. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Nadirah, Suteris (2021) Synthesis and characterization of cellulose fibers cloths for tissue engineering. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Nadrah Aqilah, Tukimat (2014) Reservoir system modelling using nondominated sorting genetic algorithm in the framework of climate change. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Natasha, Nasrudin (2023) Modelling and simulation of structural performance of beam using high volume bottom ash as aggregates replacement. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nur Farhayu, Ariffin).

Nurul Shamsinar, Shahirin (2015) Development of multiple interactions mixed matrix membrane chromatography for protein fractionation in chicken egg white. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Shareena Aqmar, Mohd Sharif (2013) Application of full factorial design to control the size of bisphenol a molecular imprinted polymer. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Che Ku Mohammad Faizal, Che Ku Yahya).

Nurul Shareena Aqmar, Mohd Sharif (2021) Production of ferulic acid via feruloyl polysaccharide hydrolysis of banana stem waste using soil mixed culture. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Shuhada, Haji Mohamed (2020) Investigation on the microstructure development and corrosion performance of friction stir welded dissimilar AZ31/AZ91 magnesium alloys. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Juliawati, Alias).

Nurul Suraya, Azahari (2022) Archimedes screw turbine model simulation on the effect of external and internal design parameters in power generation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ummu Kulthum, Jamaluddin).

Nurul Syafiqah, Mohd Azmi (2018) Evaluation of four semi-permeable membranes in the osmotic technique for establishing soil-water retention curve (SWRC) of mansuli clay. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Syazwana, Noor Azmi (2021) Simulation and experimental study of biogas explosion. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Syazwana, Noor Azmi (2021) Simulation and experimental study of biogas explosion. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Waheeda, Abdu Rahman (2021) Characterization of lubricating grease formulated from waste engine oil. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abd Aziz, Mohd Aizudin).

Nurulasma, Zainudin (2013) Ultrasonic assisted membrane anaerobic system (UMAS). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: ABDULRAHMAN, HAMID NOUR).

Nurulhusna, Ab. Hamid (2011) Identification of semiochemicals evoking behavioral response in the Selangor strain aedes aegypti (L.). PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurus Saadah, Md Yusof (2021) Personaliti pensyarah dalam pembentukan akhlak pelajar : kajian di Universiti Sains Islam Malaysia (USIM). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nuruzzakiyah, Mohd Ishanuddin (2021) Psychosocial risk factors and work performance of chemical manufacturing industry workers. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurzahida, Mohd Zaid (2010) Visualization of intracellular ice crystal formation using x-ray micro-computed tomography /. Masters thesis, Faculty of Chemical and Natural Resource Engineering (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Nurziana, Kong (2023) Effect of graphene nanoreinforcement on moisture absorption and mechanical properties of epoxy adhesive joint. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nur Zalikha, Khalil).

O

Odili, Julius Beneoluchi (2017) The design and applications of the african buffalo algorithm for general optimization problems. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Olalere, Olusegun Abayomi (2018) Heat and microwave reflux extraction, optimization, and physicochemical characterization of oleoresins from Malaysian pepper (piper nigrum). PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Oluwasoga, Akindoyo Edward (2016) Effects of polymer and surfactant complex with microbubble on the flow enhancement of liquids in pipelines. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Oluwasoga, Akindoyo Edward (2013) Introducing a new trio effects portable water treatment plant for rural areas. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Oluyinka, Oludapo Samson (2018) Lean-agile performance measurement for business process outsource service in Malaysia. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Puteri, Fadzline).

Omama, Javed (2023) Titanium and vanadium based bimetallic prussian blue analogue as a cathode material for sodium ion batteries. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Radhiyah, Abd Aziz).

Omar, Nadzeri (2017) Conical spring and localised region methodologies for modelling of soft tissue deformation. PhD thesis, RMIT University (Contributors, Thesis advisor: Yongmin, Zhong).

Omar Abdulmaged, Hammood (2022) Relay suitability based routing protocol for video streaming in vehicular ad-hoc network. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Nizam, Mohmad Kahar).

Omer Mohammed, Al-Haiqi (2022) Photocatalytic degradation of phenol in a simulated oil fields produced water and potential reuse for agriculture purposes. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdurahman, Hamid Nour).

Omoregbe, Osaze (2017) Synthesis and characterization of La-promoted Ni/SBA-15 catalysts for methane dry reforming. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ong, Huei Ruey (2016) Tailoring the preparation of palm oil based alkyd/epoxy resin composite through copper oxide nanoparticle. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ooi, Jessie (2018) Ontology based keyword suggestion for image processing domain. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Osama Abdulmunem, Khayri Al-Obaidi (2020) The effect of antidiabetic activity of eurycoma longifolia, orthosiphon stamineus and punica granatum combined extracts on streptozotocin-induced diabetic rats. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Osazuwa, Osarieme Uyi (2017) Synthesis and characterization of samarium-cobalt-trioxide perovskite catalyst for the kinetic and longevity studies of methane dry reforming. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Osmanullrazi, Abdullah (2022) Investigating computational thinking among primary school students in Terengganu using visual programming. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Adzhar, Kamaludin).

P

Palanisamy, Karthick Murugan (2021) Cultivation of microalgae spirulina sp. in palm oil mill effluent for essential fatty acids production. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Govindan, Natanamurugaraj).

Pang, Sook Fun (2013) Identification, Extraction and Microencapsulation of Phenolic Compounds from Orthosiphon Stamineus Leaves. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Pang, Kar Kei (2021) Management of change framework with integrated risk analysis for temporary and emergency cases. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hanida, Abdul Aziz).

Pang, Wei Cheng (2020) Isolation, gene expression and structural analysis of fruit bromelain from Ananas comosus cultivar MD 2. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Aizi Nor Mazila, Ramli).

Panigrahi, Shrikant (2016) The influence of traditional and value based performance measures on shareholder’s value creation of Malaysian listed construction companies. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Parsia, Yasaman (2019) A procedure for minimization of nosocomial infections risk through upgrading and re-architecting of healthcare facilities. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhamad Tamyez, Puteri Fadzline).

Pothorajoo, Satishrao (2018) Modified fuzzy gain scheduling speed controller for BLDC with seamless speed reversal using direct commutation switching scheme. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hamdan, Daniyal).

Prakash Murgeppa, Bhuyar (2020) Phycodegradation of polyethylene by photosynthetic microalgae. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Prima, Vitasari (2011) The effect of biofeedback intervention program on anxiety among engineering students at Universiti Malaysia Pahang. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nubli, Abdul Wahab).

Primilla, Paramasivam (2021) Mass cultivation and lipid production of microalgae nanochloropsis sp using 10l photobiorector for biodiesel production. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Gaanty Pragas, Maniam).

Priyatachni, Subramanie (2020) Performance evaluation of wax inhibitor with sodium cloisite through experimental and molecular dynamics simulation (MD). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Priyatharishini, Mardarveran (2020) Evaluation of synthetic household wastewater quality using artocarpus heterophyllus peel as a natural coagulant. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Pui, Khoon Hong (2016) Non-enzymatic browning in glucosamine and glucosamine-peptides reaction systems as a source of antioxidant and flavouring compounds. PhD thesis, University of Alberta (Contributors, Thesis advisor: Mirko, Betti).

Puteri Emme Marina, Mohamad (2017) IN SITU growth redox-active iron-centered particles on graphene sheets for specific capacitance enhancement. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Putri Zulaiha, Razi (2014) Environmental sustainability and engineering performance of OPC-fly ash mortar mixs with different workability. Masters thesis, Universiti of Malaya (Contributors, UNSPECIFIED: UNSPECIFIED).

Putri Zulaiha, Razi (2020) Risk management framework for the delivery of public-private partnership (ppp) housing construction project : case study of malaysia housing programme (pr1ma). PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Q

Qamar, Wali (2016) Nanostructured tin oxide materials as photoanode for dye sensitized solar cells. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jose, Rajan).

Qasemi, Ahmad Shah (2016) English language needs of engineering undergraduates of an Afghan University. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Qin, Hongwu (2012) The new efficient and accurate attribute-oriented clustering algorithms for categorical data. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jazni, Mohamad Zain).

Qistina Balkis, Mohd Yusof (2021) Etika kerja Islam hubungannya dengan kemahiran kepimpinan dalam kalangan kepimpinan pelajar di Universiti Malaysia Pahang (UMP). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Qurratu 'Aini Aishah, Ahmad Fazil (2021) Prediction of blood glucose level based on lipid profile and blood pressure using multiple linear regression model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Qusay Medhat, Salih (2022) Software-defined routing protocol for mobile cognitive radio networks : a cross-layer perspective. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Arafatur, Rahman).

R

Raafat Salih, Hadi (2013) Classification of human parasitic worm using microscopic image processing technique. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kamarul Hawari).

Rabby, Gollam (2019) A tree based keyphrase extraction technique for academic literature. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md Saiful, Azad).

Rabiatuladawiah, Mahmod (2018) Preparation and characterization of poly(MMA-CO-EGDMA-CO-VBC) via photoinitiated dispersion polymerization route to sulfonated hypercrosslinked resin. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rachid, Ouache (2016) Development of mathematical models for quantitative risk and safety assessment in oil and gas refineries. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Radhiyah, Abd Aziz (2016) Synthesis and characterization of layered alkaline manganates, titanates, and molybdates for supercapacitor applications. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rafidah, Mohamed Ali Hanapiah (2022) Production of xylonic acid from xylose using recombinant E. Coli bl21 (DE3): effect of medium requirement. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rozaimi, Abu Samah).

Rafidah, Rahim (2012) Performance of biodiesel blends on compression ignition engine. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ragupathy, Darshana Kumari (2020) Intensifying university industry collaboration through technology sharing within the Malaysian perspective. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Raheem, Ajiboye Adeleke (2016) An enhanced feed-forward neural networks and a rule-based algorithm for predictive modelling of students' academic performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah Arshah, Ruzaini).

Rahil Izzati, Mohd Asri (2018) Thermal oxidation and hydroxyapatite coating of SLMed 316L stainless steel substrates. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rahimah, Embong (2016) Pazzolanic properties of hydrothermal silica gel extracted from sugarcane bagasse using eco-friendly approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rahimah, Embong (2019) Pozzolanic and strength properties of mortar containing chemically pre-treated coal bottom ash. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rahmah, Mokhtar (2012) Model pengguna aplikasi tutoran web adaptif pintar. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, Thesis advisor: Nor Azan, Mat Zin).

Rahmat Widia, Sembiring (2014) Density based subspace clustering: a case study on perception of the required skill. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jasni, Mohamad Zain).

Raj Krishna Roshan, Kanasan (2020) Study on incorporation of graphene oxide (GO) in polyvinyl chloride (PVC) mixed matrix membrane (MMM) to enhance CO2/CH4 separation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Raja Mohd Taufika, Raja Ismail (2015) Modelling and control of offshore crane systems. PhD thesis, University of Technology, Sydney (Contributors, UNSPECIFIED: UNSPECIFIED).

Raja Muhammad, Ishtiaq Khan (2021) Evaluating the effectiveness of whatsapp to develop efl vocabulary for speaking performance. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rajaletchumy, Veloo Kutty (2015) Targeted delivery of vitamin E TPGS based nanomedicine for treatment of triple negative breast cancer. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rajan, Kumaresan (2024) Mechanical behavior and statistical analysis of polyethylene terephthalate glycol. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Kumaran, Kadirgama).

Ramdan, Razali (2012) V/I control method and its an implementation for maximizing attainable efficiency of induction motor. PhD thesis, Multimedia University Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Rami Abdullah, Ali Ba Hamid (2023) Development of risk management framework for the construction industry in yemen. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Doh, Shu Ing).

Ranitha, Mathialagan (2014) Identification and optimization of lemongrass essential oils extracted by hydrodistillation and microwave assisted hydrodistillation methods. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rasha, Mohammed Abd (2015) Emulsification and demulsification of water-in-crude oil emulsion via microwave-assisted chemical treatment. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rasheed Abed, Hammood (2020) Effect of fibers in reinforced concrete deep beams with web opening. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rashid, Khalid Turki (2017) Poly (vinylidene fluoride-co-hexafluoropropylene) hollow fibre membrane for membrane distillation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rashidi, Abbas (2013) Pembangunan akhlak dalam kalangan pelajar institusi pengajian tinggi awam di Malaysia menerusi penerapan kemahiran insaniah. PhD thesis, Universiti Malaya (Contributors, UNSPECIFIED: UNSPECIFIED).

Rasul, Md. Golam (2018) Developing an integrated catchment management through water quality assessment, landuse changes analysis, soil erosion study & community engagement in Bertam River Catchment, Cameron Highlands, Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Islam, Mir Sujaul).

Ravinder, Kumar (2017) A study of morphological effect of oxygen reduction catalyst on microbial fuel cell performance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ravindran, Nadarajan (2023) Optimisation of support vector machine hyperparameters using enhanced artificial bee colony variant to diagnose breast cancer. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Noorazliza, Sulaiman).

Raza, Muhammad Ahsan (2020) Enhanced ontological query expansion model using bigram combinations and combined similarity measure for improving information retrieval. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Razali, Muda (2004) Proses fabrikasi dan pencirian bahan polimer HD4000 untuk aplikasi fotonik. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Redrouthu, Ramesh (2016) Experimental measurements and prediction of thermophysical properties of hydrocarbon mixtures using nonlinear models. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rehan, Zainol Abidin (2017) Alkali and rare earth metals loading on deoiled-spent bleaching clay as catalysts in transesterification of waste oils. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Gaanty Pragas, Maniam).

Reji Kumar, Rajamony (2023) Performance evaluation of photovoltaic thermal systems using functionalized multi-walled carbon-based nano-enhanced phase change material. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Renuga, Subarmaniam (2022) Development of gas detection and database system on cupping practice. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Riduwan, Ghazali).

Riaz, Ul Haq (2011) Design and simulation of variants of koch models for fractal antenna. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sulaiman, Norrozila).

Rihab Hussein, Jawad (2010) Production of biosurfactant from locally isolated bacteria. Masters thesis, UNIVERSITI MALAYSIA PAHANG (Contributors, Thesis advisor: Hayder A., Abdul Bari).

Risch, Awalludin (2013) The effect of torbangun plant (Coleus amboinicus Lour) active substances on lactation in mice. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Rivai, Makson (2013) Characterization and optimization of oil palm empty fruit bunch-glass fibre reinforced recycled polypropylene hybrid composites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Arun, Gupta).

Rodianah, Alias (2013) An Inexpensive & Safe Method for Preparation of Caryophyllene Oxide. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Lukas, Benjamin).

Rofilde, Hasudungan (2015) Generic DNA encoding design scheme to solve combinatorial problems. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rofiza, Mansor (2019) Characterisation of genes related to sesquiterpene compounds in agarwood production from Aquilaria malaccensis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Tajuddin, Saiful Nizam).

Rohaida, Che Man (2016) Improvement of cyclodextrin glucanotranferase excretion and cell viability of recombinant Escherichia coli immobilized on hollow fiber membrane. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Rohayu, Jusoh (2015) Mesostructured silica nanoparticles supported electrosynthesized goethite in cationic surfactant for photodegradation of 2–chlorophenol. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Aishah, Abdul Jalil).

Rokiah, Othman (2020) Properties of foamed concrete with processed spent bleaching earth as partial cement replacement. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Roshamimi , Faisal (2011) Kajian terhadap hubungan ciri-ciri inovator pengurusan dengan keinovatifan individu di Politeknik Kementerian. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Roshasliza, Samat (2010) The application of the rehabilitation module for academic achievement among technical college student's of Pahang Skills Development Center. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Muhammad Nubli, Abdul Wahab).

Rosmawati, Naim (2014) Polyvinylidene fluoride and polyetherimide hollow fiber membranes for carbon dioxide stripping in gas-liquid membrane contactor. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Rosmazi, Rosli (2013) Active force control with iterative learning control algorithm for a vehicle suspension. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Rosshila, Idris (2019) Development of a port-stream based equation oriented modelling of dividing wall column using MOSAIC. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rossyuhaida, Mohd Zakria (2015) Improved bioethanol production from oil palm trunk sap. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rozaida, Mohd Darus (2019) Organizational capabilities and the software project success in public sectors : process innovation as a mediator. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Roziasyahira, Mutazah (2017) Chemical constituents, antioxidant and cytotoxicity properties of Rhodomyrtus Tomentosa root extracts. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abd Hamid, Hazrulrizawat).

Rozita, Mohd Yusof (2015) Image enhancement and segmentation on simultaneous latent fingerprint detection. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rozlina, Mohamed (2014) Implications of caching for JXTA peers. PhD thesis, Aston University (Contributors, UNSPECIFIED: UNSPECIFIED).

Rozman, Mohd Tahar (2015) Characterization of titanium aluminide alloys synthesized by mechanical alloying technique. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ishak, Mahadzir).

Rubaiyi, Mat Zaid (2019) Study on the extraction of high methoxyl pectin from dragon fruit (hylocereus polyrhizus) peels and its adsorption performance againts cholesterol. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ruhaizad, Ishak (2015) Penempatan dan pensaizan optimum bagi penjana teragih dalam sistem kuasa untuk peningkatan kestabilan voltan. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Rumana, Ghufran (2012) Enhanced Anaerobic Degradation Of Palm Oil Mill Effluent Using Butyrate, Cao-Ckd And Denitrifying Sulfide Removal. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rusmawarni, Ramli (2012) Removal of lignin from meranti wood sawdust for enhances enzymatic hydrolysis and production of sugar alcohol. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Ruth, Alara Oluwaseun (2019) Optimizing microwave-assisted extraction of phenolic compounds, in vitro antioxidant and anti-diabetic activities of the extracts from bitter leaves (vernonia amygdalina) and purple fleabane (vernonia cinerea). PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ruzaini, Abdullah Arshah (2012) Assessment instrument for integrated information system success in institution of higher learning. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Ruzainisuhanaliza, Abdul Muni (2018) Development of actors and artefacts taxonomy for social research network sites. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ruzlaini, Ghoni (2013) Modeling and implementation of space vector modulation for three-phase direct torque control matrix converter. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmed, N. Abdalla).

S

S M Nazmus, Sadat (2022) A reliable friendship mechanism for online social network exploiting pre and post-filtering approach. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md Arafatur, Rahman).

Saad Mohsin, Abed (2021) Synthesis and characterization of a corn oil based demulsifier for crude oil emulsion. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sabreen, Ramzi Alfarra (2015) Biosorption of Cd (II), Cu (II), Fe (III) And Pb (II) from water system using moringa oleifera leaves. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: N. Ali, Eman).

Saffirna, Mohd Soffie Suppiah (2022) Study on failure maps of laser-welded I-core sandwich plates. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ruzaimi, Mat Rejab).

Safwan, Shalbi (2023) Study of boron neutron capture therapy components at thermal column for nuclear reactor. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazlianie, Sazali).

Sahimel Azwal, Sulaiman (2018) Compatible pairs of actions for finite cyclic 2-groups and the associated compatible action graphs. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad, Mohd Sham).

Saidah An’nisaa, Salam (2023) Developing the prediction model for mitigating the abandoned housing projects in malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nur Farhayu, Ariffin).

Saifful Kamaluddin, Muzakir (2015) Structural – electronic properties correlation of CdSe quantum dot solar cell using experimental and theoretical investigations. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Saifful Kamaluddin, Muzakir (2015) Structural–electronic properties correlation of CdSe quantum dot solar cell using experimental and theoretical investigations. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Saifudin, Razali (2012) Smoothing techniques and a spherical simplex unscented transformation in solving a SLAM problem. PhD thesis, Okayama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Saiful Riza, Zainul Abidin (2011) Efficiency improvement of LDO ouput based linear regulator with supercapacitor energy recovery - a versatile new technique with an example of a 5v to 1.5 v version. Masters thesis, The University of Waikato (Contributors, UNSPECIFIED: UNSPECIFIED).

Sajadin, Sembiring (2012) An application of predicting student performance using kernel k-means and smooth support vector machine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad@ Hamza, Mohd. Azwan).

Sajith Akhil, Vinayak (2023) Path planning for autonomous navigation in roundabouts using an improved triangular based polynomial estimation technique for bezier curve generation with aa and aa* algorithms. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Aizzat, Zakaria).

Sakina, Shahabudin (2013) Epitope mapping and functional characterization of monoclonal antibodies against the tip-localized adhesions of CFA/I, CS17 and CS2 class 5 fimbriae of enterotoxigenic Escherichia coli. Masters thesis, The Pennsylvania State University (Contributors, UNSPECIFIED: UNSPECIFIED).

Sakinah, Muhamad Hisham (2022) Thermophysical properties and tribological behavior of hybrid cellulose nanocrystal copper (ii) oxide (cnc-cuo) as lubricant additives. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Sakinah, Muhamad Hisham (2017) Tribological behavior of waste cooking oil blended lubricant. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Salah Omar Abdulali, Habberrih (2022) Investigate the ability of moringa oleifera seeds and neem leaves as anti-fungal activity in urban drinking water. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Che Ku Mohammad Faizal, Che Ku Yahya).

Salimah, Shafii (2012) The effect of preparation methods condition on the activity of palladium and platinum catalysts towards hydrogenation of palm olein. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Salma, Yaakub (2021) Development of low cost autonomous wheelchair using gps for outdoor purposes. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Salman Ameen Ali, Abdullah Alabd (2021) Optimal power flow solutions for power system operations using moth-flame optimization algorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Salwani, Mohd Salleh (2013) Computational crashworthy optimization of partially filled aluminium foam for automative side member. PhD thesis, Universiti Putra Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Sam, Yin Yee (2020) Dynamic fast local Laplacian completed local ternary pattern (dynamic FLapCLTP) for face recognition. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sami, Waqas (2019) Statistical analysis of the nexus between dietary habits and practices with clinical outcome in Saudi patients with type 2 diabetes. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sangeethavani, Sundarajan (2020) Extraction of essential oil from patchouli leaves using microwaveassisted hydrodistillation and hydrodistillation methods. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Santhana, Krishnan Chandrasekar (2017) Hydrogen and methane production from palm oil mill effluent through two-stage dark fermentation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Santhi, Ulakanathan (2021) Synthesis and physical property characterization of nickel nanowires. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Santi Puteri Rahayu, - (2012) Logistic regression methods for classification of imbalanced data sets. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: R.J Asnim, Ohamadz Zain).

Santi Wulan, Purnami (2011) Enhancement of new smooth support vector machines for classification problems. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Santoso, Ardhi Wicaksono (2017) Fuzzy-based frost filter for speckle noise reduction of Synthetic Aperture Radar (SAR) image. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sara Asmawati, Shariffuddin (2018) Transformation of university college to university. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sarah Alyaa, Mohd Khaidi (2021) Bass diffusion and grey models to forecast new tourism product: a case study of Tanah Aina Resort in Malaysia. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu, Noratikah).

Sarmilaah Dewi, Subramaniam (2023) Comparative analysis of bioactive compounds and antioxidant activity of Malaysian gingers affected by different drying and extraction methods. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Nurul Aini, Mohd Azman).

Sasikala, Appalasuwami (2018) Green synthesis of silver and copper nanoparticles using hydroxyethyl cellulose and its antibacterial activity. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Saydul Akbar, Murad (2023) A new priority rule cloud scheduling technique that utilizes gaps to increase the efficiency of jobs distribution. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zafril Rizal, M. Azmi).

Sayed Javid, Azimi (2015) Structural behaviour of kenaf fiber as part shear reinforcement in oil palm shell reinforced concrete beams. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sayed Qasim, Alavi (2015) Boundary layer stagnation point flow towards an exponentially stretching/shrinking sheet. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Salleh, Mohd Zuki).

Selvakumar, Raja Saravana Kumar (2012) Design of multiple microcontrollers platform for use in academic environment. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ghazali, Kamarul Hawari).

Selvakumaran, Arokiasamy (2014) Effects of leader-member exchange on employee motivation: a case study in Malaysia and UK. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Selvamani, Sathish Kumar (2019) Mechanical behaviour of acrylonitrile butadiene styrene (ABS) specimen by fused deposition modelling (FDM). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, A/L Samykano).

Sembiring, Rahmat Widia (2014) Density subspace clustering: a case study on perception of the required skill. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Semin, Semin (2011) Development of new injector for compressed natural gas engine and the effect on performance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Shaban, Omar Kassim A. (2018) Factors affecting brand loyalty : a study of palm cooking oil in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Shabana, Tabassum (2023) Stochastic modelling of cancer cell proliferation and death in response to anticancer therapeutics of thymoquinone. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norhayati, Rosli).

Shahab, Suhail Najm (2017) An enhanced minimum variance distortionless response beamformer techniques to reduce interference in array antenna system. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zainun, Ayib Rosdi).

Shaharuddin , Kormin (2012) Development and characterization of biodegradable blends of low density polyethylene (LDPE) incorperated with thermoplastic sago starch. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Shaheer Shaida, Durrani (2021) An efficient self-configurable driver for color light emitting diode. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Abu Zaharin).

Shahid, Ali (2013) Activated cement clinker catalyst development for biodiesel production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Shahid, Shahid Hussain (2018) Effects of varied numbers of supplemental video-podcasts on Saudi EFL male undergraduates’ listening comprehension and attitudes towards video-podcasts in listening. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Shahidah, Hamzah (2016) Penggunaan teknik bio maklumbalas bagi mengukur ciri-ciri disiplin dan tanggungjawab dalam kalangan mahasiswa. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Shahoodh, Mohammed Khalid (2018) Compatible actions for finite cyclic groups of p-power order. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad, Mohd Sham).

Shaiful Azman, Taha (2018) Developing safety and health assessment model as benchmark strategy to evaluate and measure the performance of contractor in JKR construction project. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jamaludin, Omar).

Shalyda, Md Shaarani (2018) Cross- linked enzyme aggregates of recombinantxylanase for hemicelluloses to xylooligosaccharides. PhD thesis, Universiti Teknologi Malaysia (Contributors, Thesis advisor: Md. Illias, Rosli).

Shamaileh, Abeer Moh'd Salem (2019) A new feature-based wavelet completed local ternary pattern (FEAT-WCLTP) for texture and medical image classification. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Taha Hussein, Rassem).

Shamala Devi, Vijaya Kumar (2022) Nanoparticle assisted gemini surfactant as wax deposition suppressant in Malaysian crude oil using experimental and molecular dynamics simulation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norida, Ridzuan).

Shamini, Gunaseelan (2014) Barrier, thermal and mechanical properties of polyurethane-modified clay nanocomposites for thermal insulation material. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Yusoh, Kamal).

Shamsul, Zakaria (2016) Electrical breakdown and mechanical ageing in dielectric elastomers. PhD thesis, Technical University of Denmark, Kongens Lyngby (Contributors, UNSPECIFIED: UNSPECIFIED).

Sharfah Ratibah, Tuan Mat (2022) Android mobile malware detection model based on permission features using machine learning approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Faizal, Ab Razak).

Sharif, Mohd Zaki (2021) Performance of nanolubricants and r1234yf in automotive air conditioning system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sharifah, Awang (2015) An investigation on leading characteristics of rapidkuantan bus passengers using correspondence analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zulkiple, Adnan).

Sharifah Fathiyah, Sy Mohamad (2022) Optimization of jacalin extracted from jackfruit (artocarpus heterophyllus) seed using reverse micellar extraction. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Farhan, Mohd Said).

Sharifah Maszura, Syed Mohsin (2012) Behaviour of fibre-reinforced concrete structures under seismic loading. PhD thesis, Imperial College London (Contributors, UNSPECIFIED: UNSPECIFIED).

Sharifah Sakinah, Syed Abd Mutalib (2023) Improved robust estimator and clustering procedures for multivariate outliers detection. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Siti Zanariah, Satari).

Sharifah Zafierah, Syed Badrulzaman (2022) Development of immobilized keratinase and investigation of its efficiency on edible bird nest cleaning process. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Aizi Nor Mazila, Ramli).

Sharmiza, Kamaruddin (2016) Classification of canned pineapple based on first order colour statistics. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ghazali, Kamarul Hawari).

Sharul Nizam, Turiman (2023) Influence of studs shape and different pitch conditions on rugby athlete sprinting performance. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Nasrul Hadi, Johari).

Shathiswara Rao, Subramaniam (2019) Influence of 3D printing parameters on mechanical behaviour of polylactic acid (PLA) specimen utilizing FDM technique. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sheikh Mohammad Maniruzzaman, Al Masud (2023) Formulation of the sustainable educational development framework (sedf) to improve migrant workforce contribution in malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rohana, Hamzah).

Shoriya Aruni, Abdul Manaf (2015) Studies of bio waste materials from sago hampas and oil palm leaves for cell imaging applications. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: GURUMURTHY, HEGDE).

Shuhada, Abdul Muttalib (2014) Bioconversion of isoeugenol to vanillin with different straints of pseudomonas aeruginosa. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siddique, Md. Nurul Islam (2015) Co-digestion of petrochemical wastewater with activated manure in continuous stirred tank reactor for methane production. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Wahid, Zularisam).

Siddique, Md. Nurul Islam (2012) Treatment and enhanced degradation of petrochemical wastewater by continuous stirred tank reactor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sidra, Aman (2020) Exact solutions on unsteady convective flow of viscous, casson, second grade and maxwell nanofluids. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siew, Shing Wei (2023) Screening of pathogenic microbiota harbouring antibiotic resistance genes from healthcare wastes in Malaysia : a high-throughput amplicon sequencing approach. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Hajar Fauzan, Ahmad).

Singh, Lakhveer (2013) Biohydrogen production from palm oil mill effluent using polyethylene glycol immobilized cells in upflow anaerobic sludge blanket reactor. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Wahid, Zularisam).

Singh, Sharanjit (2019) Syngas production from methane reforming processes over boron promoted Ni/SBA-15 catalysts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti 'Ai'syah, Che Osmi (2019) An implementation plan of total maximum daily load (TMDL) and water quality modelling approach at the Melaka River, Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Samah, Nurlin).

Siti Aishah, Safi (2019) Theoretical analysis on the wind power and pumped hydropower storage integrated flood mitigation system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Aishah, Wahid (2019) Optimization of magneto-rheological fluid in squeeze mode using combined d-optimal mixture design. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Aissah, Mad Ali (2019) Enhancement of software project performance by overcoming waste, volatility and constraints simultaneously. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Shahryar, Sorooshian).

Siti Aisyah, Jilani (2024) Comparison studies between pressure-controlled pump with conventional pump for domestic application. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Akhtar Razul, Razali).

Siti Aisyah, Romli (2017) Kesan kejadian histeria terhadap guru di sekolah-sekolah menengah di daerah Kuantan. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahyuddin, Ismail).

Siti Aisyah Radhiah, Mohamed (2013) Production of beta-keratin from chicken feathers. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Arun, Gupta).

Siti Fadhilah, Mohamed Ibrahim (2019) Kalman Filter parameter estimation for Vanadium Redox Flow Battery (V-RFB) equivalent circuit with parasitic inductance. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rusllim, Mohamed).

Siti Fiqryyah, Musa (2014) Chemical composition and antibacterial activity of essential oil from cymbopogon citratus and cymbopogon nardus. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abduel Rahman, Azhari Hamid Nour).

Siti Hajar, Mat Zani (2018) Optimization of bioethanol from oil palm frond juice by using saccharomyces cerevisiae. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Hajar, Mohd Khairuddin (2022) Modelling of n-TH order limit language using automata theory in DNA splicing system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Azrin, Ahmad).

Siti Hajar, Mohd Rasdi (2018) Isolation and characterization of bacterial isolates for bioremediation of disposed x-ray sheets to produce silver nanoparticles. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Essam, A. Makky).

Siti Hajar Noor, Shaarani (2014) Functional characterization of flower morphogenesis and senescence related genes using virus induced gene silencing technique in petunia hybrida. PhD thesis, Okayama University Japan (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Hamidah Radiyah, Shiekh Mahmud (2021) The study on plant hormones and spent mushroom compost on the growth of ficus carica. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Hana, Abu Bakar (2014) Molecular interaction of patchouli extraction process using molecular dynamic simulation approach. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Haryani, Tomadi (2015) Kebolehmesinan komposit matriks logam Al-Si/A1N menggunakan mata alat pemotong karbida. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Hawa, Apandi (2016) Dashboard information model for social research network sites. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Khadijah, Mat Saad (2022) Developing a data monitoring system for methadone flexi dispensing (MFLEX) service using mahalanobis-taguchi system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Yazid, Abu).

Siti Maharah, Abdul Khalim (2021) The implementation of environmental management system (ems) in construction project : investigation of success factors. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Mazlifah, Ismail (2017) Biological treatment of acidic palm oil mill effluent (POME) by using soil mixed culture (SMC). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zainol, Norazwina).

Siti Nabihah, Othman (2022) A matlab-based graphical user interface (GUI) to predict the food quality during frying process. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazaliza, Mohd Jamil).

Siti Natrah, Ismail (2016) Mechanical extraction of ferulic acid from banana stem waste. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazwina, Zainol).

Siti Noor, Hajar Zamrus (2018) Synthesis and characterization of curcuminoids by claisen-schmidt condensation and their cytotoxic effects on hela and K562 cancer cell lines. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Noor Fahimah, Jusoh (2014) Identification of chemical constituents of agarwood (aquilaria malaccencis) oil extracted by supercritical fluid and hydrodistillation method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Noraishah, Masoum Raman (2021) Synthesis of modified rice husk activated carbon and study on their carbon dioxide (co2) adsorption capacity. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Norazila, Zahari (2017) Investigation of dynamics properties of dissimilar materials produced by friction stir welding. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Norazimah, Mohamad Aziz (2019) Reverse micelle extraction of erythromycin with mixed surfactant anionic and zwitterionic. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Norfatihah, Zulkifli (2023) Steady forced convection flow and heat transfer in a nanofluid with passive control model. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norhafizah, Md Sarif).

Siti Normunira, Ramli (2019) Development of flat sheet thin film composite nanofiltration membrane for separation of acetic acid inhibitor and sugar from biomass hydrolysate. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Norsita, Mohd Rawi (2013) Regeneration and recycling hemodialysis membrane dialyzer. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Nudra Shafinie, Ab Aziz (2017) Development of solar still for water purification and its performance analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Nur Aishah, Mohd Amin (2019) Kalman filter based impedance parameter estimation for transmission line and distribution line. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hamzah, Ahmad).

Siti Nur Farhain, Mohd Yusri (2023) Overcoming causes of claim disputes in construction projects: a dematel based model. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Lee, Chia Kuang).

Siti Nur Sakinah, Jamaludin (2011) Development of regenerative piezoelectric linear generator for alternative power generation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Nur Sakinah, Jamaludin (2015) A parametric study on design and characteristics of stepwise-built functionally graded Hydroxyapatite/Titanium. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Basri, Shahnor).

Siti Nuraffini , Kamarulizam (2012) Formulation a dual effect natural drag reduction agent. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Nurashiken, Md Sabudin (2023) Mathematical model for predicting the performance of photovoltaic system with delayed solar irradiance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazaliza, Mohd Jamil).

Siti Nurqurratulainie, Miskan (2023) Synthesis and catalytic evaluation of nickel supported on fibrous zeolite-y for co2 reforming of ch4. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Herma Dina, Setiabudi).

Siti Nursharah, Muhamad Zainon (2021) Heat transfer performance of green bio-glycol based TiO2-SiO2 nanofluids. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Nursyahirah, Ahmad Latfi (2018) Enhancement of ring and ripple microelectrodes design using dielectrophoresis (DEP) for biochip application. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Nursyuhada, Mahsahirun (2017) Development of S-PWM voltage source inverter for induction motor drives. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Nurzalikha Zaini, Husni Zaini (2018) Swiftlet sound identification using vector quantization and gaussian mixture model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Rohaida, Mohamed (2017) Mechanical and biocompatibility analyses of metabiomaterials cobalt chrome molybdenum manufactured by selective laser melting for load bearing implant. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Saiful Anwar, Che Ghani).

Siti Roslindar, Yaziz (2019) Modified Box-Jenkins and GARCH for forecasting highly volatile time series data. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Roslinazairimah, Zakaria).

Siti Sabrina, Mohd Sukri (2018) Immobilisation of xylanase for xylooligosaccharides production from meranti wood sawdust. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Shariah, Ghazali (2020) Photocatalytic degradation of pome over lanthanum doped calcium oxide derived from cockle shells. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Suhaila, Sabarudin (2022) 2D simulation of assistive grouser mechanism using discrete element method (dem) for traversing on unconsolidated soft sand. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Najmuddin, Ibrahim).

Siti Umairah , Mokhtar (2011) Application of dispersive liquid-liquid microextraction based on solidification of floating organic droplet in the analysis of anti-depressant drugs. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Zanariah, Satari (2015) Parameter estimation and outlier detection for some types of circular model. PhD thesis, University of Malaya (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Zubaidah, Adnan (2020) Evaluation of optimal cooling control for seeded batch crystallization inclusive dissolution with uncertainties. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Zubaidah, Sulaiman (2015) Gas explosion characteristics in confined straight and 90 degree bend pipes. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Soh, Jiah Chee (2017) Ethylene production from ethanol dehydration over non- modified and phosphorus modified zeolite Y. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Soh, Shi Chuan (2018) Multispectral palm vein image fusion for contactless palm vein verification system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zamri, Ibrahim).

Solahuddin, Azuwa (2022) Effects of shredded waste paper as an additive on properties of concrete and structural behaviour of reinforced concrete beam. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Fadzil, Mat Yahaya).

Soleh, Ardiansyah (2015) Rule extraction from multi-layer perceptron neural network using decision tree for currency exchange rates forecasting. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Solly, Aryza (2011) Speed estimation techniques for induction motor using digital signal processing. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Souleyman, Ahmat Issaka (2012) Application of microwave and ultrasonic demulsification techniques on petroleum based emulsions. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Yunus, Rosli).

Sri Murni, Astuti (2011) Optimization process of binahong extraction and characterization study. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sri Nur Areena, Mohd Zaini (2021) The application of using time-driven activity-based costing in product operation and service operation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Suaidah Syazwani, Sulaiman (2019) A cash study of performance measurement method for single minute exchange of die (SMED) in metal stamping industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhamad Arifpin, Mansor).

Sufihana, Yusof (2019) Screening and identification of fungi associated with natural and artificially induced agarwood from aquilaria malaccensis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Suhailah, Sujali (2019) Numerical study on engineering aspect of the cell geometries and flow channel design of Vanadium redox flow battery (V-RFB). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rusllim, Mohamed).

Suhaily, Suhaimi (2019) Synthesis of cyclodextrin (CD) using immobilized enzyme on hollow. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Suhazri Amrin, Rahmad (2022) A discrete simulated kalman filter optimizer for combinatorial optimization problems. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zuwairie, Ibrahim).

Suhirman, . (2016) A new soft set-based technique for clustering attribute selection in educational data mining. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jasni Mohamad, Zain).

Sui, Hai Juan (2017) Impacts of knowledge sharing and knowledge creation on employee engagement - case studies of Malaysian universities. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Suliana, Ab Ghani (2021) Online auto-tuned proportional-integral controller using particle swarm optimization for dual active bridge DC-DC converter. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Suliman Abdulmalek, Hamood Ahmed (2024) Internet of wearable things-based on lora and wi-fi healthcare monitoring system for medical applications. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Abdul Nasir, Abd Ghafar).

Sultana, Sharmin (2019) Kinetic modelling of ethanol production from oil palm trunk SAP during fermentation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazaliza, Mohd Jamil).

Sultana, Tahnim (2018) Cellulose supported poly (amidoxime) Cu/Pd nanoparticles for Aza-Michael and Suzuki-Miyaura reactions. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: M. Sarkar, Shaheen).

Sultana, Umme Salma (2019) Exploring the combined effort of authentic leadership and psychological capital on job satisfaction mediated by job stress, in Bangladesh, pharmaceutical industry. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sumaya, Sarmin (2020) Bio-electrochemical power generation from petrochemical wastewater using as substrates in microbial fuel cell. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rahman Khan, Maksudur).

Sumiliana, Sulong (2023) Development of flood depth-damage curve for urban area in kuantan, pahang. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noor Suraya, Romali).

Sunil, Vaishak (2023) Surface engineering of commercial activated carbon for improving the charge storability of electrochemical capacitors. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jose, Rajan).

Sureena, Abdullah (2014) Hydrogen production via simultaneous methane reforming and water splitting processes using membrane reactor. PhD thesis, Newcastle University (Contributors, UNSPECIFIED: UNSPECIFIED).

Surenthiran, Gnanasekaran (2022) Isolation of nanofibrillated cellulose derived from n36 ananas comosus leaf via chemo-mechanical treatment and reinforcement in chitosan-based composite films. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noor Ida Amalina, Ahamad Nordin).

Suria, Kupan (2016) Formation of aroma compounds by degradation of beta-carotene from crude palm oil and oil palm wastes. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Suryanti, Awang (2015) Feature fusion using a modified genetic algorithm for face and signature recognition system. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Sutarman, . (2016) Correlation-based subset evaluation of feature selection for dynamic Malaysian sign language. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Majid, Mazlina).

Sutarto, Auditya Purwandini (2011) The effect of heart variability biofeedback training for improving cognitive performance among female manufacturing operators. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhamad Nubli, Abdul Wahab).

Suzalina, Kamaruddin (2020) An ultraviolet based methyl mercaptan system for halitosis using an optical fibre sensor. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Manap, Hadi).

Sweeta, Akbari (2021) Characterizations of saponin and phenolic bioactive compounds extracted from fenugreek seed and aloe vera leaves via microwave-assisted extraction method. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hamid Nour, Abdurahman).

Syafikah, Ayob (2022) The numerical approximation for the indentation of granular materials by a smooth rigid wedge punch. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: Nor Alisa, Mohd Damanhuri).

Syafiq Fauzi, Kamarulzaman (2015) Design of multiple-functions controller based on machine learning. PhD thesis, University of Tsukuba (Contributors, Thesis advisor: Seiji, Yasunobu).

Syafiqah Amira, Khairuddin (2018) Synthesis and characterization of zeolites from palm oil fuel ash (POFA) by ultrasonic assisted hydrothermal approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Syafiqah Hanis, Mohd Fauzi (2021) Wastewater treatment process: a modified model for oxidation pond. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazaliza, Mohd Jamil).

Syahierah Eliya, Sabri (2019) Analysis of total harmonic distortion and switching losses of PWM in grid-connected photovoltaic system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sujod, Muhamad Zahim).

Syahrulanuar, Ngah (2021) Field programmable gate array based sigmoid function implementation using differential lookup table and second order nonlinear function. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rohani, Abu Bakar).

Syajaratul Jahriah, Hassan (2019) Investigation of thermodynamic properties of ascorbic acid crystal in different solvents using experimental and simulations methods. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Fatmawati, Adam).

Syamsutajri, Syamsol Bahri (2016) Development of mesoscale oscillatory baffled reactor (MOBR) for bioethanol production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Syarifah Norsuhaila, Syed Mahmud (2021) Fabrication of pu-efb composite as a microwave substrate for patch antenna at 2.4 ghz. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Syazwana, Sapee (2023) The effect of oxygenated turpentine and alpha pinene oil additives in diesel fuel on the performance, combustion, and emissions in diesel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Fitri, Yusop).

Syazwani, Mohd Zokri (2019) Convective boundary layer flow of Jeffrey fluid and Jeffrey nanofluid over various geometry. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Salleh, Mohd Zuki).

Syed Farhan, Hasany (2014) Synthesis, characterization and optimization of magnetic nanostructures by sol-gel technique and application in water purification. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Syed Muhamad Ubaidillah, Syed Husin (2021) School discipline management : legal restrictions and the importance of legal literacy amongst discipline teachers. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Syeda Najiha, Masood (2015) Performance investigation and multi-objective optimization of end milling of aluminium alloy 6061 T6 with coated and uncoated carbide tools under various cooling conditions. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Syifak Izhar, Hisham (2016) Enhanced LSB watermarking methods based on scanning patterns for authentication of medical images. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sylviano, Abu Bakar (2020) Keberkesanan kaedah pengajaran berasaskan teknologi mudah alih di kalangan guru pendidikan Islam dalam meningkatkan mutu pengajaran dan pembelajaran. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hasmadi, Hj.hassan).

Syukran Hakim, Norazman (2013) Study on an application of bioengineering by layer TIRF measurement. Masters thesis, Tokyo University of Science (Contributors, UNSPECIFIED: UNSPECIFIED).

Syurahbil, A (2011) Network instrusion prevention system ( NIPS) based on network intrusion detection system (NIDS) and ID3 algorithm decision tree classifier. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noraziah, Ahmad).

T

Tahseen Ahmad, Tahseen (2014) Optimal geometric arrangement of unfinned and finned flat tube heat exchangers under laminar forced convection. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Tamilarasi, Arasu (2023) Path towards an attainable quality : the effect of tooling design on the product competency and process efficiency. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Amiril Sahab, Abdul Sani).

Tan, Ji Siang (2018) Combined steam and CO2 reforming of methane over carbon-resistant boron-promoted Ni/SBA-15 catalysts for syngas production. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Dai-Viet, N. Vo).

Tan, Sze Pei (2019) Numerical study of crashworthiness on honeycomb filler subjected to impact loading. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Nadiah, Mohd Saffe).

Tan, Yeong Yu (2018) Properties of concrete containing eggshell powder as partial cement replacement. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Tang, Jin Cheng (2023) Vision-based human presence detection pipeline by means of transfer learning approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Fakhri, Ab. Nasir).

Tania Suhail, Hadi (2011) Suspended solids as drag reduction agents for liquid flow in a pipeline. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hayder A., Abdul Bari).

Tao, Hai (2012) Image watermarking optimization algorithms in transform domains and feature regions. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Taofeeq Durojaye, Moshood (2023) Determinants for sustainability of biodegradable plastics: a sequential exploratory mixed methods study. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Fatimah, Mahmud).

Tasiransurini, Ab Rahman (2019) Finite impulse response optimizers for solving optimization problems. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Tawafak, Ragad M (2020) An acceptance model for contributing factors of continuous intention to use E-learning systems in Oman higher education institutions. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Awanis, Romli).

Tawfiqullah, Ayoubi (2015) Stochastic modelling of time delay for solvent production by Clostridium Acetobutylicum P262. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Tengku Khamanur Azma, Tg. Mohd Zamri (2017) Adsorption studies of dyeing natural dyes from local resources onto bamboo yarn. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zularisam, Abd Wahid).

Tengku Khamanur Azma, Tg. Mohd Zamri (2013) Melastoma malabathricum L . natural preservatives business plan. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Tengku Nor Hidayati, Tengku Zainal Abidin (2017) Kaedah al-istibra haiwan akuatik menurut perspektif Islam dan sains akuakultur : pangasius sutchii. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hassan, Ahmad).

Tengku Nur Anisa, Tengku Sallehuddin (2019) Silver nanoparticles embedded polyamide nanofiltration membrane for antimicrobial properties. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Tg Mahizatulazwa, Tg Kamaruddin (2012) Synthesis and characterization of alumina nanofiber filled poly ether ether ketone (PEEK). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Thajeel, Ekhlas Mhawi (2018) Shunt active power filter based on particle swarm optimization-wavelet transform and zero crossing controller. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Thamer, Khalil Esmeel (2020) Increasing data anonymity using privacy techniques and advanced encryption standard. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Thamir Khalil, Ibrahim (2012) Modeling and performance enhancements of a gas turbine combined cycle power plant. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Mustafizur, Rahman).

Thangavel, Mythili (2022) Investigation on the effect of reaction parameters to the palm oil cross-metathesis using 1-octene and ruthenium based catalyst. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Chin, Sim Yee).

Thanoon, Raid Duraid (2018) Optimization, characterization and immobilization of alkaline protease from chicken feather and fish fin using mixed culture. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Thanusha, Thanihaik Kumaar (2017) Study on thermodynamic properties of MTBE/alcohol binary mixtures using nonlinear models and molecular interaction using spectroscopic approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Thiwaan Rao, Narasimma Naidu (2018) Flow and heat transfer characteristics of supercritical carbon dioxide in mini-channels. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Thum, Wei Seong (2018) Development on SNR estimator for audio-visual speech recognition based on waveform amplitude distribution analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Thurga Devi, Munusamy (2022) Production of hydrogen by photoreforming of formaldehyde containing wastewater over CdO–CuO@exfoliated g–C3N4 nanoheterojunction. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Maksudur, Rahman Khan).

Tie, Ming (2021) Finite element modeling and probabilistics analysis of prestressed inversted T-beam with web opening. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Cheng, Hock Tian).

Ting, Ei Wei (2018) Development of finger vein identification system using feature combination and dimensionality reduction. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Tiong, Meng Chung (2021) Hybrid moth flame optimization mppt algorithm for accurate real-time tracking under partially shaded photovoltaic system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Toh, Kang Yang (2020) CFD and techno-economic modelling of the effect of feed spacer on reverse osmosis membrane performance. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Liang, Yong Yeow).

Tong, Foo Sheng (2018) Investigating the physico-mechanical properties of bamboo fiber reinforced composite (BFRC) plates and its effects on strengthening of rc beams externally. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Touhidul Islam, A.S.M. (2020) Critical success factors for the implementation of problem solving principles of lean in Malaysian automotive industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mustafa, Shariman).

Tran, Ngoc Thang (2022) Lanthanum oxide-promoted cobalt catalyst supported on mesoporous alumina for syngas production via methane dry reforming. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sumaiya, Zainal Abidin @ Murad).

Triantoro, Safaria (2011) The investigation of Relationship Between Leadership Practices, Role Stressor, Religious Coping and Job Insecurity With Job Stress Among University Academician In Pahang And Jogyakarta. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Triveni, Soubam (2022) Development of bio-adhesives for composites wood using natural rubber latex and modified starch with crosslinkers. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Arun, Gupta).

Tuan Norsyalieza, Tuan Aznan (2018) Molecular and bioinformatics characterization of fruit bromelain from ananas comosus. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Aizi Nor Mazila, Ramli).

Tulasi, Martin (2022) Determinants of continuous mobile banking usage in Malaysian police force. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Fauri@Fauzi, Muhammad Ashraf).

test (2024) test. Masters thesis, test (Contributors, UNSPECIFIED: UNSPECIFIED).

U

Umarul Imran, Amran (2018) Environment and economic assessment of hydrogen production from methane and from ethanol. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Umi Kalsom, Masrom (2015) The effects of task complexity on the complexity of language production and task motivation in asynchronous computer-mediated communication (ACMC) environment. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Umi Rabiatul Ramzilah, P. Remli (2021) Photocatalytic degradation of methylene blue by cqds based composite derived from watermelon rinds. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ummu Kulthum, Jamaludin (2013) Developing and validating a new comprehensive glucose-insulin pharmacokinetics and pharmacodynamics model. PhD thesis, University of Canterbury, Christchurch, New Zealand (Contributors, UNSPECIFIED: UNSPECIFIED).

Urme, Binte Salam (2014) The effect of taubah and biofeedback based drug addiction intervention program among school students. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Uthayakumaran, Arulselvi (2019) The effect of tell me more (TMM) usability on students’ segmental and suprasegmental pronunciation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

V

Vidhyaa, Paroo Indran (2016) Boiler ash as catalyst for the catalytic synthesis of organic carbonates. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ab. Rahim, Mohd. Hasbi).

Vidyadharan, Baiju (2015) Development of nanocomposite nanowires by electrospinning as a supercapacitor electrode with high energy density, power density and rate capability. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Vigneswaran, Narayanamurthy (2017) A new carbon nanoparticle-polymer composite for cell imprint lithography. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Fahmi, Samsuri).

Vijayan, Bincy Lathakumary (2021) Pseudocapacitive augmentation of palm kernel shell carbon for high density supercapacitive charge storage. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Vikneswary, Rajendaran (2022) Development of membrane support for levulinic acid extraction using supported liquid membrane process. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syed Mohd Saufi, Tuan Chik).

Vivekanandan, Panneerselvam (2020) Optimisation of injection moulding process parameters using taguchi and desirability function. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Vorathin, Epin (2017) Improved static and dynamic FBG sensor system for real-time monitoring of composite structures. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

W

W. K., Ngui (2016) Blade fault diagnosis using artificial intelligence technique. PhD thesis, Universiti Teknologi Malaysia (Contributors, Thesis advisor: Leong, Mohd Salman).

Wafaa, Kamil Mahmood (2014) Elucidation of physio-chemical characterization of ultrasonic chemically demulsified crude oil. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wahaizad, Safiei (2022) Development of tri-hybrid nanofluids as cutting fluids to enhance performance of end milling process of aluminium alloy 6061-T6. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md Mustafizur, Rahman).

Wahida, Amat Fadzil (2017) Fabrication of novel particleboards from oil palm frond blended with empty fruit bunch and treated with preservative against termite. UNSPECIFIED thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wajahat, Taj Abbasi (2024) ESL teachers’ belief system and its impact on technology-based english language teaching in Pakistan. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Fatimah, Ali).

Wajiha Tasnim, Urmi (2021) Wear rate reduction mechanism of minimum quantity lubrication to enhance machinability using hybrid nano-coolant (TiO2- Al2O3). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Waleed Abdulmaged, Hammood (2021) Extending delone and mclean success model with diffusion of innovation theory factors for flood early warning and response system success model : a case study at pahang civil defence department. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ruzaini, Abdullah Arshah).

Waleed Khalid, Abduljabbar (2011) An integrated decision support system based on simulation and mathematical programming of Petroleum transportation logistics. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mat Tahar, Razman).

Wan Amnin, Wan Yahaya (2020) Development of semi refined carrageenan/glycerol/a-tocopherol reinforced with cellulose nanofiber for active packaging application. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Anuar, Wan Hassan (2014) Numerical simulation on the effect of anastomosis and stenosis upon radiocephalic arteriovenous fistula. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Atikah, Wan Omar (2018) The environmental fate and mobility of oestrogens into soils. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Farhana, W Idris (2024) Exfoliation of few-layer graphene in red spinach solution : the fabrication of smart “sticky note” sensor. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Zulhelmi, Ismail).

Wan Iryana, Wan Md Nor (2017) Wrinkling prediction in deep drawing metal forming : kinematic hardening model versus mixed hardening model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Ismail, Ibrahim (2020) Modelling and control strategies for hydrokinetic energy harnessing. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd. Rusllim, Mohamed).

Wan Marzuki, Wan Ismail (2021) Kajian persepsi penerapan elemen merentas kurikulum kreativiti di dalam pengajaran dan pembelajaran tulisan jawi. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hafizoah, Kassim).

Wan Maseri, Wan Mohd (2013) The influence of appropriation of knowledge management system and intrinsic motivation on social capital in higher education institutions. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Mohd Azlan, Wan Mohd Nowalid (2019) Integration chatter avoidance and minimum quantity lubrication condition in machining process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Mohd Hafizuddin, Wan Yussof (2012) Evaluation of heterogeneous quaternary ammonium catalyst for transesterification of trigycerides. PhD thesis, Newcastle University (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Mohd Nafis, Wan Lezaini (2019) Precision motion and energy exchange control on robot’s leg interaction with soft surface. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Muhamad Syafiq, Wan Ismail (2018) Co-gasification of coal and biomass (empty fruit bunch, oil Palm frond, and kempas) in an entrained flow gasifier. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rasid, Ruwaida).

Wan Muhammad Firdaus, Wan Sulaiman (2015) Analysis of sepic DC/DC converter using perturb & observe algorithm for photovoltaic charge controller. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daniyal, .Hamdan).

Wan Muhammad Noor Sarbani, Mat Daud (2022) Graphene additive effects on diesel blend fuels for performance, combustion and emissions on diesel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Adnin, Hamidi).

Wan Nor Afiqah, Wan Othman (2020) Relationship between employability and graduate’s competencies based on programme learning outcomes analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Nor Maawa, Wan Ghazali (2020) Performance, combustion and emissions analysis of water emulsified biodiesel in a diesel engine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Norlinda Roshana, Mohd Nawi (2012) Kajian keberkesanan sisa ekstrak patchouli (Pogostemon Cablin) terhadap kesan menghalau tikus sawah (Rattus Argentiventer). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Haji Rosli, Mohd Yunus).

Wan Nur Atiqah, Wan Shamsudin (2023) Green synthesis of silver nanoparticles mediated by neem leaves extract as antifungal agent against fungi isolated from water treatment. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Siti Hajar Noor, Shaarani).

Wan Nur Azhani, W. Samsudin (2017) Improved abnormal detection using self-adaptive social force model for visual surveillance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Nur Huda Aqilah, Alias (2021) Performance analysis on grid-connected pv system during grid faults with dc-link protection and decoupled current control. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Nursyafiqah, Wan Jusoh (2019) Strength of soft clay reinforced with encapsulated bottom ASH columns. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Nurul Syahirah, Wan Lanang (2022) Assessing the influence of attitudinal function on sustainability awareness in manufacturing industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Faiz, Mohd Turan).

Wan Rusyaini, Wan Mohd (2015) Measuring laziness through self-regulation using heart rate variability (HRV) biofeedback. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Nubli, Abdul Wahab).

Wan Sharuzi, Wan Harun (2013) Experimental and numerical studies on superhigh strengthening sintered low alloy steels fabricated by metal injection molding). PhD thesis, Kyushu University (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Sulaiman, Wan Mohamad (2011) A study of energy utilisation in a variable link length 3 DOF revolute articulated manipulator. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Syahirah, Wan Samsudin (2015) Initial assessment of facial nerve paralysis based on motion analysis using optical flow method. PhD thesis, Universiti Malaysia Perlis (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Syahirah, Wan Samsudin (2021) Severity scoring approach using modified optical flow method and lesion identification for facial nerve paralysis assessment. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Zaiton, Wan Sulaiman (2014) Explosion sensitivity and severity of south east asian coals. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Zulaisa Amira, Wan Jusoh (2016) Optimizing isotactic polypropylene membrane preparation condition via tips for carbon dioxide and nitrogen separation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Weerana, Eh Kan (2016) Titanium dioxide based hybrid photocatalyst for seawater desalination pre-treatment. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wen Li, Lim (2015) Single-stage DNA splicing system via Yusof-Goode approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Widodo Budi, Santoso (2016) Mixture formation and combustion characteristics of diesel-hydrogen dual fuel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Wong, Lo Ing (2015) Alternative method for economic dispatch utilizing grey wolf optimizer. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Herwan, Sulaiman).

Woon, Chee Wai (2017) Tailoring manganese dioxide electrocatalyst by platinum and carbon nanotube for air-cathode microbial fuel cell. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wu, Jing (2013) Development of teaching performance evaluation tool in higher education using artificial intelligent. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wu, Lihua (2013) Synthesis of polymer-stabilized metallic nanoparticles and their hydrogenation activity for vegetable oil. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wun, Wee Long (2020) Characterization and kinetic study of activated sludge process in palm oil mill effluent (POME) treatment. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Chua @ Yeo, Gek Kee).

X

Xiao, Rui (2012) Lane markings detection based on e-maxima transformation and improved hough. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kamarul Hawari, Ghazal).

Y

Yadav, Sumit Manohar (2017) Modification of nanoclay using transition metal ion and its effect on mechanical, physical, and thermal properties of wood-plastic composites. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kamal, Yusoh).

Yahya Ayesh, Qasem Dahawi (2022) Modeling and analysis of oil-palm biomass (opb) pyrolysis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Halim, Abdul Razik).

Yap, Chui Yan (2010) Predictive effects of managerial need support, basic psychological need satisfaction, and role overload on work engagement. PhD thesis, UNIVERSITI KEBANGSAAN MALAYSIA (Contributors, UNSPECIFIED: UNSPECIFIED).

Yap, Hiew Thong (2018) Evaluation of the sanitary sewerage system flow design in Kuantan city. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Yap, Wee Leong (2016) Development of ironless coreless axial flux permanent magnet generator. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Yashini, K.Selvanathan (2021) Microbial acid production by indigenous microorganism from ananas cosmosus. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nasratun, Masngut).

Yasin, Amina (2018) Design and development of new zinc porphyrin molecules as high performing photoacoustic contrast agents. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Yusoff, Mashitah).

Yasmeen, Hafiz Zaki Ahmed (2021) The performance of integrated ultrasonic membrane anaerobic system (IUMAS) in treating sugar cane wastewater. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Yasmin, Abdul Wahab (2017) 2 MHz electrical resistance tomography for static liquid solid profile measurement. PhD thesis, Universiti Teknologi Malaysia (Contributors, Thesis advisor: Ruzairi, Abdul Rahim).

Yasmin Amirah, Che Yahaya (2021) Three tongkat ali plants (eurycoma longifolia, polyalthia bullata, and stema tuberosa) studied for their aphrodisiac potentials with emphasis on their testosterone boosting capabilities. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Yau, Ti Dun (2023) An enhanced next generation security operation center framework for information system security management. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Faizal, Ab Razak).

Yogeswaran, Muthusamy (2015) Machinability of AISI304 stainless steel using Ethylene Glycol nano particles based coolant. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Yogeswaran, Muthusamy (2012) Prediction of grinding machinability when grind P20 tool steel using water based ZnO nano-coolant. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Yousaf, Iftikhar (2019) Determining suitability of pro-and anti-cultural literary texts for a specific interpretive community using HRV Biofeedback at Taibah university. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Wahab, Muhammad Nubli).

Yousif, Yousif Atalla (2019) Optimal channel dimensions and temperature characteristics of SI-FinFET transistor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Youventharan, Duraisamy (2016) Strength and stiffness improvement of bio-cemented sydney sand. PhD thesis, University of Sydney (Contributors, UNSPECIFIED: UNSPECIFIED).

Yuhai, He (2018) Optimization of ultrasound and enzyme assisted extraction of eurycomanone from eurycoma longifolia (tongkat ali). PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Yusmin, Jaffar (2021) Modelling success factors influencing industrialized building system project performance using dematel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Lee Chia, Kuang).

Yusof, Hashim (2020) The impact of organizational ergonomic risk factors on musculoskeletal disorders and driving fatigue towards near miss accident amongst Malaysian express bus drivers. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Yusra Yaseen, Lazim (2015) The influence of human resources management practices and governmental support on organizational performance in small manufacturing businesses in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Yuvaraj, A. R. (2016) Synthesis and characterization of azobenzene based compounds for their photo-induced effects. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Z

Zaenab, S.Abdul Majeed (2014) A Case study in the adoption of ICT in teaching and learning at a Malaysian Smart School. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zailin Shah, Yusoff).

Zafira Adlia, Mohd Fauzi (2020) Development of dynamic programming algorithm for maintenance scheduling problem. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zahidah, Ansari (2018) Sandwich square honeycomb structure from biodegradable and recyclable composites. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zahidy, Abd Hamid (2016) Develop the constructionpreneurial business success checklist in the construction industry. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zahrizan, Zakaria (2007) Web based information model to support maintenance and operations management. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zahrizan, Zakaria (2021) An empirical investigation the adoption factors of building information modelling (BIM) from the perspective of Malaysian Civil And Structure Consultant Firms. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Haron, Ahmad Tarmizi).

Zaidatul Syahida, Adnan (2022) The assessment on the acceptance of waste materials as a partial cement replacement in Malaysia construction industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nur Farhayu, Ariffin).

Zaidi, Syeda Maria (2019) Flood forecasting using semi-distributed hydrological model coupled with weather research and forecasting model. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zaied, Khalid (2020) Enhanced biogas production from anaerobic co-digestion of palm oil mill effluent using solar-assisted bioreactor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zainab, A Malik (2018) A system dynamics model to assess the interrelationship between different knowledge areas of PMBOK in a construction project. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Cheng, Jack Kie).

Zainab, Yousif Shnain (2016) Solid-polymer-surfactant complexes for enhancing the flow in pipelines. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zainah, Md. Zain (2012) Underactuated control for an autonomous underwater vehicle with four thrusters. EngD thesis, Okayama University (Contributors, Thesis advisor: Watanabe, Keigo).

Zainal Abidin, Kusmin (2021) Pembinaan prosedur operasi standard dalam mengendalikan kes perceraian yang melibatkan dakwaan sihir pemisah di Mahkamah Syariah. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zainal Ariffin, Selamat (2018) Optimization of lubrication techniques on machining performance of aluminium alloy 319. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zakirah, Mohd Zahari (2018) Model improvement and supersaturation control of crystallization process for the case of agglomeration and breakage. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noor Asma Fazli, Abdul Samad).

Zakri, Ghazalli (2011) Development of intelligent evaluation system for product end-of-life selection strategy. PhD thesis, Japan , Okayama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Zalili, Musa (2016) An enhancement particle-based method for dynamic object tracking. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Bakar, Rohani).

Zalinawati, Muhamad (2021) Performance of buri palm (corypha utan) reinforced epoxy composite : effect of alkali treatment. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zamri, Basumi (2020) Pengaruh faktor gaya pengajaran guru-guru bahasa inggeris terhadap pencapaian pelajar dalam subjek bahasa inggeris di sekolah-sekolah rendah daerah Mersing, Johor. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zamri, Mohamed (2014) A study of tyre cavity resonance noise mechanism and countermeasures using vibroacoustic analysis. PhD thesis, RMIT University (Contributors, UNSPECIFIED: UNSPECIFIED).

Zamzuri, Hamedon (2014) In-situ measurement and formability improvement in stamping of high strength steel and titanium alloy sheets. PhD thesis, Toyohashi University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Zarifa Amira, Zulkeflee (2023) Lean management implementation in Malaysian public sector : critical success factors and performance implications. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Siti Airin, Abdul Ghani).

Zarith Liyana, Zahari (2023) An enhanced stress indices in signal processing based on advanced matthew correlation coefficient (MCCA) and multimodal function using EEG signal. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahfuzah, Mustafa).

Zarith Sufia, Azlan (2022) Renewable energy project success in malaysia: the influence of stakeholder engagement indicators with the moderating effect of renewable energy policy implementation. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Puteri Fadzline, Muhamad Tamyez).

Zayer, Mehdi Qasim (2016) The improvement of the physical properties of indium tin oxide thin film through annealing processes. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zeti Akma, Rhazali (2014) Modeling the F region ionosphere peak height variations over Malaysia by Antenna Pattern Synthesis Technique. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zetty Akhtar, Abd Malek (2017) Effect of nickel doping into solder alloy and its strength between SnCu-Ni/immersion gold joint. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zeyohanness, Senait Sileshi (2018) Antimicrobial activities of the crude extracts and electrospun nanofibers containing rhodomyrtus tomentosa (kemunting) roots. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abd Hamid, Hazrulrizawati).

Zhang, Hui (2016) The measurement of un-signalized intersection elasticity of a traffic system for a new park-and-ride. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zhengxiaoming, Aminaimu (2020) The effect of balanced scorecard on business performance : a mediating effect of new product development success in food and beverage industry in Malaysia. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zianor Azrina, Zianon Abdin (2021) Nanocrystalline cellulose (NCC) from oil palm fiber via ultrasound assisted hydrolysis and it’s reinforcement in poly vinyl alcohol (PVA) hydrogel. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Dalour, Hossein Beg).

Ziaurahman, Zia (2016) An investigation of EFL learners’ foreign language anxiety in English language classroom in Afghanistan. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zubair, Khalil (2016) Energy absorption performance of press-formed shell. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zuhaira, Abdullah (2020) Analysis of long-chain alcoholbiodiesel-diesel tri-fuel blends on combustion characteristics, engine performances and exhaust emissions of diesel engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).

Zuhairah, Zulkfli (2023) An analysis on the effect of surface morphology, microstructure and hardness of friction stir processed Mg AZ91. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Zamzuri, Hamedon).

Zul Rasyied, Ab. Rasat (2021) An ultraviolet sulfur dioxide detection using an open-path optical fiber based sensor for enclosed building monitoring application. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Manap, Hadi).

Zularisam, A. W. (2008) Natural organic matter removal from surface water using submerged ultrafiltration membrane unit. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Zulhelmi, Ismail (2013) Study the effect of screw speed and temperature profile on structure, thermal and physical properties of melt blended polyamide 6/MMT nanocomposites. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zulhishamuddin, Abd Rahman (2018) Laser surface modification of Cr-MO powders on grey cast iron for surface properties improvement. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah Nur Aqida, Syed Ahmad).

Zulkarnain, Lubis (2011) Three phase induction motor coupled to DC motor in hybrid electric vehicle application. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zulkhibri, Ismail @ Mustofa (2016) Unsteady MHD flow of viscous and second grade fluids in a porous medium. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Zulkifli, Ahmad@Manap (2012) Analisis kepatahan ke atas vertebra lumbar tulang belakang menggunakan kaedah unsur terhingga dan monte carlo. Masters thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Zulkifli, Musa (2014) Intelligent monitoring system for the classification of customers using the hybrid face detection. Masters thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Zulkifly, Jemaat (2013) Treatment of complex industrial wastewaters containing ammonium and phenolic compounds using granular sludge in continuous airlift reactors. PhD thesis, Universitat Autonoma de Barcelona (Contributors, UNSPECIFIED: UNSPECIFIED).

Zulkifly, Mohammad @ Ab Aziz (2019) Influence on the structural optical and electrical properties of cuprous iodide complexes with tetramethylethylenediamine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zulli, Muhamad (2021) Kajian hubungan prestasi akademik dengan aktiviti kawad kaki pengakap serta koheren heart rate variability (hrv) di kalangan pelajar sekolah rendah. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Nubli, Abdul Wahab).

Zulsyazwan, Ahmad Khushairi (2013) Optimization of Oil Palm Trunk Core Biodelignification Using Pleurotus Ostreatus. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zulsyazwan, Ahmad Khushairi (2018) Production of ferulic acid from oil palm frond bagasse hydrolysis using mixed culture fermentation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zuraidah, Ali (2015) Recovery process of jacalin from crude protein of jackfruit seed powder : optimization of extraction and cytotoxicity study of jacalin towards human cancer cell. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Zuraidah, Mohd Ali (2010) Development of pretreatment techniques for high productivity gaharu extraction. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Yunus, Rosli).

Zuraina, Ali (2012) Effects of three vocabulary learning techniques on vocabulary retention. PhD thesis, Universiti Putra Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Zuriana, Sidi Ahmad (2013) Production of Sorbitol from Meranti Wood Sawdust Using Solid State Fermentation (SSF) Process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).