Items where Division is "Institute of Postgraduate Studies" and Year is 2019

Article

A. A. M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat and Mahendran, Samykano and G., Najafi (2019) Performance improvement in mobile air conditioning system using Al2O3/PAG nanolubricant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1299-1310. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

A. H., Sufian and A. S., Jamaludin and A. N., Ibrahim and M. N., Mhd Razali and M. S., Osman and S. B., Hamzah (2019) Tyre Safety Performance on Asphalt Pavement in Malaysia Climate - Analysis through Finite Element Method. Journal of the Society of Automotive Engineers Malaysia, 3 (3). pp. 236-245. ISSN 2600-8092(Printed); 2550-2239(Online). (Published)

A. K. M., Kafi and Alim, Samiul and Rajan, Jose and M. M., Yusoff (2019) Fabrication of a glucose oxidase/multiporous tin-oxide nanofiber film on Prussian blue–modified gold electrode for biosensing. Journal of Electroanalytical Chemistry, 852 (113550). pp. 1-6. ISSN 1572-6657. (Published)

Abd El-Hakim, Abou El fettouh Abd El Moneim and Haroun, Ahmed Abd Allah and Rabie, Abdel Gawad Mohamed and Ali, Gomaa A. M. and Abdelrahim, Mohamed Yahia Marei (2019) Improving the mechanical and thermal properties of chlorinated poly(vinyl chloride) by incorporating modified CaCO3 nanoparticles as a filler. Turkish Journal of Chemistry, 43 (3). pp. 750-759. ISSN 1300-0527. (Published)

Abdul Rahman, Mohd Kasim and Nur Syamilah, Arifin and Syazwani, Mohd Zokri and Mohd Zuki, Salleh (2019) Fluid-particle interaction with buoyancy forces on jeffrey fluid with newtonian heating. CFD Letters, 11 (1). pp. 1-16. ISSN 2180-1363. (Published)

Abdul Rahman, Talib and Hasan, Ahmad (2019) Keberkesanan latihan TVET dan bantuan modal peralatan kepada golongan asnaf fakir dan miskin dalam peningkatan di negeri Pahang. Jurnal Dunia Pengurusan, 1 (1). pp. 1-8. ISSN 2682-8251. (Published)

Abdulbari, Hayder A. and Basheer, Esmail Abdullah Mohammed (2019) Microfluidics chip for directional solvent extraction desalination of seawater. Scientific Reports, 9 (12576). pp. 1-11. ISSN 2045-2322. (Published)

Abdulwahab, Haneen A. and Noraziah, Ahmad and Al-Sewari, Abdul Rahman Ahmed Mohammed and Salih, Sinan Q. (2019) An enhanced version of black hole algorithm via levy flight for optimization and data clustering problems. IEEE Access, 7 (8809737). pp. 142085-142096. ISSN 2169-3536. (Published)

Adzmi, M. A. and Abdul Adam, Abdullah and Abdullah, Z. and Mrwan, Anes G. (2019) Effect of Al2O3 and SiO2 metal oxide nanoparticles blended with POME on combustion, performance and emissions characteristics of a diesel engine. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6859-6873. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Afiqah, Yeop and Jessinta, Sandanasamy and Pang, Sook Fun and Sureena, Abdullah and Mashitah, Mohd Yusoff and Jolius, Gimbun (2019) Extraction and identification of bioactive compounds from L. pumila. Journal of Engineering and Science Research, 3 (3). pp. 1-5. ISSN 2289-7127. (Published)

Afiqah, Yeop and Pang, Sook Fun and Law, Woon Phui and M. M., Yusoff and Jolius, Gimbun (2019) Assessment of Size Reduction and Extraction Methods on the Yield of Gallic Acid from Labisia pumila Leaf via Microstructures Analysis. Materials Today: Proceedings, 19. 1280 - 1286. ISSN 2214-7853. (Published)

Ahmad, M. S. (2019) Glycerol waste valorization to mesoxalic acid over a bimetallic Pt-Pd/CNT catalyst in alkaline medium. Journal of Nanoscience and Nanotechnology. pp. 1-29. ISSN 1533-4880 (Print); 1533-4899 (Online). (Submitted) (Submitted)

Ahmad, M. S. and Cheng, C. K. and Ong, Huei Ruey and Hamidah, Abdullah and Hong, Chi Shein and Chua, Gek Kee and Mishra, Puranjan and Khan, Maksudur R. (2019) Electro-oxidation of waste glycerol to tartronic acid over Pt/CNT nanocatalyst: study of effect of reaction time on product distribution. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. pp. 1-18. ISSN 1556-7036 (Print); 1556-7230 (Online). (In Press / Online First) (In Press / Online First)

Ahmad Faizrin, Fuzlin and Bakri, Hassan and Sahraoui, B. and Ahmad Salihin, Samsudin (2019) Study on the effect of lithium nitrate in ionic conduction properties based alginate biopolymer electrolytes. Materials Research Express, 7 (015902). pp. 1-15. ISSN 2053-1591. (Published)

Ahmad Faizrin, Fuzlin and Nagao, Y. and Izan Izwan, Misnon and Samsudin, Ahmad Salihin (2019) Studies on structural and ionic transport in biopolymer electrolytes based on alginate-LiBr. Ionics, 26. pp. 1923-1938. ISSN 1862-0760. (Published)

Ahmad Hafizi, Awang and Abdul Halim, Abdul Razik and Azuin, Mad Noor and Aainaa Izyan, Nafsun (2019) Modelling and optimization of torrefied pellet fuel production. Pertanika Journal of Science & Technology (JST), 27 (4). pp. 2139-2152. ISSN 0128-7680. (Published)

Ahmad Izul Fakhruddin, Azimi and Norazaliza, Mohd Jamil (2019) Mathematical analysis for a system of nonlinear ordinary differential equations related to ethanol production. ASM Science Journal, 12 (Special 6). pp. 193-199. ISSN 1823-6782. (Published)

Ahmed Zainul, Abideen and Fazeeda, Mohamad (2019) Supply chain lead time reduction in a pharmaceutical production warehouse – a case study. International Journal of Pharmaceutical and Healthcare Marketing, 14 (1). pp. 61-88. ISSN 1750-6123. (Published)

Aimi Asyiqin, Abu Kassim and Norhayati, Abdullah and Mohammad Zuhaili, Yahya (2019) The Pre-Evaluation of Crosslinked Anion Exchange (CAX) Resin on Nitrates Removal. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 5 (2). pp. 1-8. ISSN 0126-8139. (Published)

Akbari, Sweeta and Nour, A. H. and R. M., Yunus and Alara, Oluwaseun Ruth and Abayomi, Olalere Olusegun (2019) Extraction, characterization and antioxidant activity of fenugreek (Trigonella-Foenum Graecum) seed oil. Materials Science for Energy Technologies, 2 (2). pp. 349-355. ISSN 2589-2991. (Published)

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and Heim, Hans P. and Feldmann, Maik and Mariatti, M. (2019) Oxidative induction and performance of oil palm fiber reinforced polypropylene composites - effects of coupling agent and UV stabilizer. Composites Part A: Applied Science and Manufacturing, 125 (105577). ISSN 1359-835X. (Published)

Al-Amshawee, Sajjad and Mohd Yusri, Mohd Yunus (2019) Influence of light emitting diode (LED) on microalgae. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 5 (2). pp. 9-16. ISSN 0126-8139. (Published)

Al-Fasih, Mohammed Yahya Mohammed and Mohd Haziman, Wan Ibrahim and Nurul Fasihah, Basirun and Putra Jaya, Ramadhansyah and Mohd Syahrul Hisyam, Mohd Sani (2019) Influence of Partial Replacement of Cement and Sand with Coal Bottom Ash on Concrete Properties. International Journal of Recent Technology and Engineering, 8 (3S3). pp. 356-362. ISSN 2277-3878. (Published)

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod (2019) Voltage Sag Detection in Grid-Connected Photovoltaic Power Plant for Low Voltage Ride-Through Control. Recent Advances in Electrical & Electronic Engineering, 12. pp. 1-9. ISSN 2352-0973. (Published)

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod and Blaabjerg, Frede and Yang, Yongheng (2019) Fault ride-through control of grid-connected photovoltaic power plants: A review. Solar Energy, 180. pp. 180-190. ISSN 0038-092X. (Published)

Al-haimi, Basheer and Daing Mohd Nasir, Ibrahim and Ab Hamid, Mohd Rashid (2019) Building world class universities in Yemen: exploring Yemeni higher education expert’s perceptions and thoughts. International Journal of Recent Technology and Engineering, 8 (2S9). pp. 455-460. ISSN 2277-3878. (Published)

Alaeddin, Omar and Thabet, Wael M. and Thabet, Ahmed A. S. and Nurmukhamedov, Bakhodir (2019) Profitability and risk in relation to credit monitoring and recovery strategies of Palestinian commercial banking system. Humanities and Social Sciences Reviews, 7 (2). pp. 389-395. ISSN 2395-6518. (Published)

Alara, John Adewole and Alara, Oluwaseun Ruth (2019) Ethno-medicinal potentials and phytochemical properties of aloe vera: A review. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 5 (5). pp. 57-73. ISSN 0126-8139. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. (2019) Anti-diabetic activity and mineral elements evaluation of vernonia amygdalina leaves obtained from Malaysia. Marmara Pharmaceutical Journal, 23 (3). pp. 514-521. ISSN 1309-0801. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. (2019) GC-MS and FTIR analyses of oils from Hibiscus sabdariffa, Stigma maydis and Chromolaena odorataleaf obtained from Malaysia: Potential sources of fatty acids. Chemical Data Collections, 20. pp. 1-7. ISSN 2405-8300. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. (2019) Microwave-assisted extraction of phenolics from Hibiscus sabdariffacalyces : kinetic modelling and process intensification. Industrial Crops and Products, 137. pp. 528-535. ISSN 0926-6690. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. (2019) Microwave-assisted extraction of phenolics from hibiscus sabdariffa calyces : kinetic modelling and process intensification. Industrial Crops and Products, 137. pp. 528-535. ISSN 0926-6690. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. and Alara, John Adewole (2019) Two-level factorial screening of microwave-assisted extraction parameters for the recovery of phenolic compounds from vernonia cinerea leaf. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 5 (5). pp. 16-28. ISSN 0126-8139. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. and Ishmael, Ukaegbu Chinonso and Kabbashi, Nassereldeen Ahmed (2019) Extraction and characterization of bioactive compounds in Vernonia amygdalina leaf ethanolic extract comparing Soxhlet and microwave-assisted extraction techniques. Journal of Taibah University for Science, 13 (1). pp. 414-422. ISSN 1658-3655. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. and Siti Kholijah, Abdul Mudalip (2019) Screening of microwave-assisted-batch extraction parameters for recovering total phenolic and flavonoid contents from chromolaena odorata leaves through two-level factorial design. Indonesian Journal of Chemistry, 19 (2). pp. 511-521. ISSN 1411-9420 (Print); 2460-1578 (Online). (Published)

Alara, Oluwaseun Ruth and Siti Kholijah, Abdul Mudalip and Nour, A. H. and Mahmoud, Mohammed Saeed and Obanijesu, Emmanuel Ogo-Oluwa (2019) Data on parametric influence of microwave-assisted extraction on the recovery yield, total phenolic content and antioxidant activity of Phaleria macrocarpa fruit peel extract. Chemical Data Collections, 24. pp. 1-2. ISSN 2405-8300. (In Press / Online First) (In Press / Online First)

Alashwal, B Y and Gupta, Arun and Husain, M S B (2019) Characterization of dehydrated keratin protein extracted from chicken feather. IOP Conference Series: Materials Science and Engineering, 702 (012033). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Ali, Gomaa A. M. and Habeeb, Omar Abed and Algarni, H. and K. F., Chong (2019) CaO impregnated highly porous honeycomb activated carbon from agriculture waste: symmetrical supercapacitor study. Journal of Materials Science and Chemical Engineering, 54 (1). pp. 683-692. ISSN 2327-6045 (print); 2327-6053 (online). (Published)

Almelian, Mohamad Milood and Izzeldin, I. Mohd and Abu Zaharin, Ahmad and Salem, Mohamed and Omran, Mohamed Asghaiyer and Awang, Jusoh and Sutikno, Tole (2019) Enhancing the performance of cascaded three-level VSC STATCOM by ANN controller with SVPWM integegration. International Journal of Electrical and Computer Engineering (IJECE), 9 (5). pp. 3880-3890. ISSN 2088-8708. (Published)

Amalina Hanani, Ismail and Kusbiantoro, Andri and Chin, Siew Choo and Khairunisa, Muthusamy and Mukhlis, Islam and Tee, K. F. (2019) Pozzolanic reactivity and strength activity index of mortar containing palm oil clinker pretreated with hydrochloric acid. Journal of Cleaner Production, 242 (118565). pp. 1-10. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Amizatulhani, Abdullah and Mohammad Amirul Syukri, Md Zain and Mohd Yuhyi, Mohd Tadza and Hazarika, Hemanta (2019) Potential of tyre derived geomaterial as alternative material in gabion type retaining wall. International Journal of Integrated Engineering, 11 (6). pp. 274-284. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Ansah, Richard Hannis and Sorooshian, Shahryar (2019) Green economy: Private sectors’ response to climate change. Environmental Quality Management, 28 (3). pp. 63-69. ISSN 1088-1913. (Published)

Anthony Jr, Bokolo and Adzhar, Kamaludin and Awanis, Romli and Anis Farihan, Mat Raffei and Eh Phon, Danakorn Nincarean and Aziman, Abdullah and Gan, Leong Ming and Nurbiha, A. Shukor and Mohd Shukri, Nordin and Suria, Baba (2019) Exploring the role of blended learning for teaching and learning effectiveness in institutions of higher learning: An empirical investigation. Education and Information Technologies, 24 (6). pp. 3433-3466. ISSN 1573-7608. (Published)

Ashwindran, S. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Computational fluid dynamic (CFD) of vertical-axis wind turbine: Mesh and time-step sensitivity study. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5604 -5624. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ayodele, Bamidele V. and Siti Indati, Mustapa and Mohamed Yazrul, Mohd Yassin and Sureena, Abdullah (2019) Experimental and optimization studies of hydrogen production by steam methane reforming over lanthanum strontium cobalt ferrite supported Ni catalyst. International Journal of Energy Research, 43 (14). pp. 8118-8135. ISSN 0363-907X (print); 1099-114X (online). (Published)

Azamuddin, Abdul Rahman and Wan Isni Sofiah, Wan Din and M. N. M., Kahar (2019) Distance based thresholds for 2-tier relay nodes selection in WSN. Computer Standards & Interfaces, 66. pp. 1-16. ISSN 0920-5489. (Published)

Azrag, M. A. K. and Tuty Asmawaty, Abdul Kadir and Kabir, M. Nomani and Jaber, Aqeel S. (2019) Large-scale kinetic parameters estimation of metabolic model of escherichia coli. International Journal of Machine Learning and Computing, 9 (2). pp. 160-167. ISSN 2010-3700. (Published)

B S, Elarbe and N., Ridzuan and K., Yusoh and Ibrahim, Elganidi and N, Abdullah (2019) Screening of the factors for novel pour point depressant copolymer synthesis to improve the copolymer yield. IOP Conference Series: Materials Science and Engineering, 702 (012028). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Basheer, Esmail Abdullah Mohammed and Mahmood, Wafaa K. and Abdulbari, Hayder A. (2019) In situ ultrasound enhancement of octanoic acid directional solvent extraction for seawater desalination. Chemical Engineering Communications, 206 (7). pp. 940-952. ISSN 0098-6445 (print); 1563-5201 (online). (Published)

Bhuyar, P. and M. M., Yusoff and Mohd Hasbi, Ab. Rahim and Sundararaju, Sathyavathi and Gaanty Pragas, Maniam and Govindan, Natanamurugaraj (2019) Effect of Plant Hormones on the Production of Biomass and Lipid Extraction for Biodiesel Production from Microalgae Chlorella Sp. Journal of Microbiology Biotechnology and Food Sciences, 9 (4). pp. 671-674. ISSN 1338-5178. (Published)

Bhuyar, P. and Mohd Hasbi, Ab. Rahim and M. M., Yusoff and Gaanty Pragas, Maniam and Govindan, Natanamurugaraj (2019) A selective microalgae strain for biodiesel production in relation to higher lipid profile. Maejo International Journal of Energy and Environmental Communication, 1 (1). pp. 8-14. ISSN 2673-0537. (Published)

BinJubeir, Mohammed and Ali Ahmed, Abdul Ghani and Mohd Arfian, Ismail and Sadiq, Ali Safaa and Muhammad Khurram, Khan (2019) Comprehensive survey on Big Data Privacy Protection. IEEE Access, 8. pp. 2067-2079. ISSN 2169-3536. (Published)

Chahal, Sugandha and Kumar, A and Jahir Hussain, Fathima Shahitha (2019) Development of biomimetic electrospun polymeric biomaterials for bone tissue engineering. A review. Journal of Biomaterials Science, Polymer Edition, 30 (14). pp. 1308-1355. ISSN 0920-5063. (Published)

Charles, Ashwin and Cheng, C. K. (2019) Photocatalytic treatment of palm oil mill effluent by visible light-active calcium ferrite: effects of catalyst preparation technique. Journal of Environmental Management, 234. pp. 404-411. ISSN 0301-4797. (Published)

Charles, Ashwin and Khan, Maksudur R. and Ng, Kim Hoong and Wu, Ta Yeong and Lim, Jun Wei and Wongsakulphasatch, Suwimol and Witoon, Thongthai and Cheng, C. K. (2019) Facile synthesis of CaFe2O4 for visible light driven treatment of polluting palm oil mill effluent: Photokinetic and scavenging study. Science of The Total Environment, 661. pp. 522-530. ISSN 0048-9697. (Published)

Chong, Yee Chin and Sorooshian, Shahryar (2019) Possible Barriers Affecting Implementation of ISO28000 for the Supply Chain. International Journal of Supply Chain Management (IJSCM), 8 (1). pp. 90-97. ISSN 2050-7399 (Online). (Published)

Christopher Ngadi, Anak Julius and Lailatul Niza, Muhammad and Hamdan, Daniyal and Norazila, Jaalam and Nor Rul Hasma, Abdullah and Suliana, Ab Ghani (2019) A comparative study of hysteresis current controller and PI controller in grid-connected inverter. International Journal of Advanced Trends in Computer Science and Engineering, 8 (6). pp. 3182-3187. ISSN 2278-3091. (Published)

Elganidi, I. and Elarbe, B.S. and Norhayati, Abdullah and N., Ridzuan (2019) Characterization of a novel terpolymer containing maleic anhydride-co-stearyl methacrylate-cobenhely acrylate for wax inhibition application. IOP Conference Series: Materials Science and Engineering, 702 (1). pp. 12-27. ISSN 17578981. (Published)

Elhag, Husam Eldin Elhag Abugabr and Nailaa, Aishath and Nour, A. H. and Azilah, Ajit and Ahmad Ziad, Sulaiman and Badhrulhisham, Abdul Aziz (2019) Optimization of protein yields by ultrasound assisted extraction from Eurycoma longifolia roots and effect of agitation speed. Journal of King Saud University - Science, 31 (4). pp. 913-930. ISSN 1018-3647. (Published)

Erdiwansyah, . and Mahidin, . and R., Mamat and M. S. M., Sani and Fitri, Khoerunnisa and Asep, Kadarohman (2019) Target and demand for renewable energy across 10 ASEAN countries by 2040. The Electricity Journal, 32 (10). pp. 1-10. ISSN 1040-6190. (Published)

Fahad, Ahmed Mohammed and Alani, Sammer and Mahmood, Sarmad Nozad and Fahad, Nadia Mohammed (2019) NS2 based performance comparison study between DSR and AODV protocols. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.4 S1). pp. 379-393. ISSN 2278-3091. (Published)

Farouk, A M and Romali, N S and Rahman, R A and M A, Seman (2019) Optimization techniques for rehabilitating water distribution networks. International Conference of Sustainable Earth Resources Engineering 2020, 641 (1). 012-019. ISSN 10.1088. (Published)

Fatimah, Mahmud and Puteri Fadzline, Muhamad Tamyez and Mohamad Farizuan, Mohd Nor (2019) Determinants in developing a learning factory in higher educational institution. International Journal of Recent Technology and Engineering, 8 (2S7). pp. 189-192. ISSN 2277-3878. (Published)

Fatimah, Shamsudin and Abdul Muiz, Moktar and Syamsul Bahari, Abdullah (2019) Managing solid waste using chloride-based ionic liquids. International Journal of Environmental Analytical Chemistry, 99 (14). pp. 1484-1493. ISSN 0306-7319. (Published)

Fatin Farisha Alia, Azmi and Sahraoui, Bouchta and Saifful Kamaluddin, Muzakir (2019) Study of ZnO Nanospheres Fabricated via Thermal Evaporation for Solar Cell Application. Makara Journal of Technology, 23 (1). pp. 11-15. ISSN 2355-2786. (Published)

Fatin Zafirah, Mansur and Che Ku Mohammad Faizal, Che Ku Yahya and Noor Asma Fazli, Abdul Samad and Atnaw, Samson Mekbib and Shaharin, Sulaiman (2019) Experimental studies on gasification performance of sawdust and sawdust pellet in a downdraft biomass gasifier. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 5 (2). pp. 22-28. ISSN 0126-8139. (Published)

Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. (2019) Occupational ergonomics risk factors prioritization using integrated analytical hierarchy process (AHP) approach: a study of a local automotive component manufacturer. Human Factors & Ergonomics Journal (HFEJ), 4 (2). pp. 1-14. ISSN 2590-3705. (Published)

Fazliana, Fauzun and S. N., Aqida and Izwan, Ismail (2019) Design of laser melting of tool steel for surface integrity enhancement. Jurnal Tribologi, 22. pp. 18-31. ISSN 2289-7232. (Published)

Firdaus, Ahmad and Mohd Faizal, Ab Razak and Feizollah, Ali and Hashem, Ibrahim Abaker Targio and Mohamad, Hazim and Nor Badrul, Anuar (2019) The rise of “blockchain”: bibliometric analysis of blockchain study. Scientometrics, 120 (3). pp. 1289-1331. ISSN 0138-9130. (Published)

Ghawanmeh, Abdullah A. and Al-Bajalan, Hussein M. and Mackeen, Mukram Mohamed and Alali, Feras Q. and K. F., Chong (2019) Recent developments on (−)-colchicine derivatives: Synthesis and structure-activity relationship. European Journal of Medicinal Chemistry, 185 (111788). pp. 1-16. ISSN 0223-5234. (Published)

Haneen, Abd Wahab and Noraziah, Ahmad and Alsewari, Abdulrahman A. and Sinan, Q. Salih (2019) An enhanced version of black hole algorithm via levy flight for optimization and data lustering problems. IEEE Access, 7. pp. 142085-142096. ISSN 2169-3536. (Published)

Hazirah A., Razak and Nornasuha, Abdullah and Setiabudi, H. D. and Chin, S. Y. and Nurul Aini, Razali (2019) Refluxed Synthesis of SBA-15 Using Sodium Silicate Extracted from Oil Palm Ash for Dry Reforming of Methane. Materials Today: Proceedings, 19 (4). pp. 1363-1372. ISSN 2214-7853. (Published)

Hazrulrizawati, Hamid and Roziasyahira, Mutazah (2019) Synthesis of silver nanoparticles by clinacanthus nutans extract supported with identification of flavonoids by UPLC-QTOF/MS and its antimicrobial activity. Iranian Journal of Science and Technology, Transaction A: Science, 43 (5). pp. 2219-2225. ISSN 1028-6276. (Published)

Hong, Chi Shein and Chin, S. Y. and Cheng, C. K. and Chua, Gek Kee (2019) Selective oxidation of glycerol to mesoxalic acid by laccase/2,2,6,6-tetramethylpiperidine-N-oxyl system : effect of process conditions and the kinetic modeling. Chemical Engineering Communications, 206 (12). pp. 1645-1660. ISSN 0098-6445 (print); 1563-5201 (online). (Published)

Hossain, Mohammed Anwar and Ayodele, Bamidele V. and Cheng, C. K. and Khan, Maksudur R. (2019) Optimization of renewable hydrogen-rich syngas production from catalytic reforming of greenhouse gases (CH4 and CO2) over calcium iron oxide supported nickel catalyst. Journal of the Energy Institute, 92 (1). pp. 177-194. ISSN 1743-9671. (Published)

Hsieh, Chin-Hsien and Irene, Wei Kiong Ting and Asif, Jawad and Le, Hanh Thi My (2019) The role of controlling shareholders in determining investments of intellectual capital among Taiwanese semiconductor companies. Journal Of Intellectual Capital, 21 (1). pp. 62-86. ISSN 1469-1930. (Published)

Hujainah, Fadhl and Rohani, Abu Bakar and Abdulgabber, Abdullateef (2019) Investigation of requirements interdependencies in existing techniques of requirements prioritization. Tehnicki Vjesnik, 26 (4). pp. 1186-1190. ISSN 1330-3651. (Published)

Husain, M B S and Gupta, Arun and Alashwal, B Y (2019) Development of keratin based hydrogels for biomedical applications. IOP Conference Series: Materials Science and Engineering, 702. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Husin, Syed Muhamad Ubaidillah (2019) Teacher recruitment, selection and promotion: The role of teachers’ unions in Malaysia. Journal of Techno Social (JTS), 11 (2). pp. 24-32. ISSN 2229-8940. (Published)

Imran, Ali and Quazi, M. M. and Zalnezhad, E. and Sarhan, Ahmed A. D. and N. Liana, Sukiman and M., Ishak (2019) Hard anodizing of aerospace AA7075-T6 aluminum alloy for improving surface properties. Transactions of the Indian Institute of Metals, 72 (10). pp. 2773-2781. ISSN 0972-2815. (Published)

Intan Shafinaz, Abd Manaf and Mohd Hasbi, Ab. Rahim and Maniam, Gaanty Pragas (2019) Biodiesel production from catfish (Pangasius) fat via ultrasound- assisted method. Maejo International Journal of Energy and Environmental Communication, 1 (1). pp. 15-20. ISSN 2673-0537. (Published)

Jaliliantabar, Farzad and Ghobadian, Barat and Carlucci, Antonio Paolo and Najafi, Gholamhassan and Rizalman, Mamat and Ficarella, Antonio and Strafella, Luciano and Santino, Angelo and De Domenico, Stefania (2019) A comprehensive study on the effect of pilot injection, EGR rate, IMEP and biodiesel characteristics on a CRDI diesel engine. Energy, 194 (116860). pp. 1-13. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Jaya Vejayan, Palliah and Norliana, Munir and Yee, Lee Lian and Rupbansraaj, Bathmanathan and Halijah, Ibrahim and Srikumar, Chakravarthi (2019) Tropical fruits of mango and noni having dual effects of coagulating milk and enriching the curds with micro-constituents of medicinal potential. Malaysian Journal of Science, 38 (3). pp. 34-47. ISSN 2600-8688. (Published)

Jayshree, Thuraisingam and Mishra, Puranjan and Gupta, Arun and Soubam, Triveni and Mohd Bijarimi, Mat Piah (2019) Novel natural rubber latex/lignin-based bio-adhesive: synthesis and its application on medium density fiber-board. Iranian Polymer Journal volume, 28. pp. 283-290. ISSN 1735-5265. (Published)

Jing, Wang and Yaseen, Zaher Mundher and Shamsuddin, Shahid and Saggi, Mandeep Kaur and Tao, H. and Kisi, Ozgur and Salih, Sinan Q. and Al-Ansari, Nadhir and Chau, Kwok-Wing (2019) Implementation of evolutionary computing models for reference evapotranspiration modeling: Short review, assessment and possible future research directions. Engineering Applications of Computational Fluid Mechanics, 13 (1). pp. 811-823. ISSN 1994-2060. (Published)

Johari, N. A. and F. R. M., Romlay and W. S., Wan Harun (2019) SS 316L/HA composite via powder injection moulding: Mechanical and physical properties. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5480 -5492. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Jupin, John Arthur and Sutikno, Tole and Mohd Arfian, Ismail and Mohd Saberi, Mohamad and Shahreen, Kasim and Deris, Stiawan (2019) Review of the machine learning methods in the classification of phishing attack. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1545-1555. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Kamil Zakwan, Mohd Azmi and Ahmad Shahrizan, Abdul Ghani and Zulkifli, Md. Yusof and Zuwairie, Ibrahim (2019) Deep underwater image enhancement through colour cast removal and optimization algorithm. The Imaging Science Journal, 67 (6). 330 -342. ISSN 1368-2199 (Printed); 1743-131X. (Published)

Kamil Zakwan, Mohd Azmi and Ahmad Shahrizan, Abdul Ghani and Zulkifli, Md. Yusof and Zuwairie, Ibrahim (2019) Natural-based underwater image color enhancement through fusion of swarm-intelligence algorithm. Applied Soft Computing, 85 (105810). pp. 1-19. ISSN 1568-4946 (print); 1872-9681 (online). (Published)

Kanchana, Manirajah and Sheela, Sukumaran and Abdullah, PKC20005 and Nornasuha, Abdullah and Hazirah A., Razak and Nurul Aini, Razali (2019) Evaluation of low cost-activated carbon produced from waste tyres pyrolysis for removal of 2-chlorophenol. Bulletin of Chemical Reaction Engineering & Catalysis, 14 (2). pp. 443-449. ISSN 1978-2993. (Published)

Karim, Ahasanul and Islam, M. Amirul and C. K. M., Faizal and Yousuf, Abu and Howarth, Martin and Dubey, Bipro Nath and Cheng, C. K. and Khan, Maksudur R. (2019) Enhanced Biohydrogen Production from Citrus Wastewater Using Anaerobic Sludge Pretreated by an Electroporation Technique. Industrial & Engineering Chemistry Research, 58 (2). pp. 573-580. ISSN 1520-5045. (Published)

Karim, Ahasanul and Islam, M. Amirul and Yousuf, Abu and Khan, Maksudur R. and C. K. M., Faizal (2019) Microbial Lipid Accumulation through Bioremediation of Palm Oil Mill Wastewater by Bacillus cereus. ACS Sustainable Chemistry & Engineering, 7 (17). pp. 14500-14508. ISSN 2168-0485. (Published)

Khairunisa, Muthusamy and Mirza, Jahangir and Nur Azzimah, Zamri and Mohd Warid, Hussin and Anwar, P. P. Abdul Majeed and Kusbiantoro, Andri and Budiea, Ahmed Mokhtar Albshir (2019) Properties of high strength palm oil clinker lightweight concrete containing palm oil fuel ash in tropical climate. Construction and Building Materials, 199. pp. 163-177. ISSN 0950-0618. (Published)

Khalis, Mokhtar and Hazri Dahalan, Md Razip and Effinizam, Abdul Latip (2019) Operation effect to voltage SAG Immunity Levels of AC Contractors at petrochemical plant in Pahang, Malaysia. AIM, 1796. pp. 1-5. ISSN 2032-9644. (Published)

Khan, Imran and Ainol Haryati, Ibrahim and Asiah, Kassim and Khan, Raja Muhammad Ishtiaq (2019) Evaluating the efficacy of active reading software in enhancing EFL learners’ reading comprehension skills. International Journal of Scientific and Technology Research, 8 (12). pp. 1861-1869. ISSN 2277-8616. (Published)

Khan, Raja Muhammad Ishtiaq and Noor Raha, Mohd Radzuan and Alkhunaizan, Abdulmohsin Suliman and Mustafa, Ghulam and Khan, Imran (2019) The Efficacy of MALL Instruction in Business English Learning. International Journal of Interactive Mobile Technologies (iJIM), 13 (8). pp. 60-73. ISSN 1865-7923. (Published)

Khan, Tanveer Ahmed and Anisah Sajidah, Haji Saud and Saidatul Shima, Jamari and Mohd Hasbi, Ab. Rahim and Park, Ji-Won and Kim, Hyun-Joong (2019) Hydrothermal carbonization of lignocellulosic biomass for carbon rich material preparation : a review. Biomass and Bioenergy, 130. pp. 1-2. ISSN 0961-9534. (Published)

Kho, Yap Bing and Hussanan, Abid and Muhammad Khairul Anuar, Mohamed and Mohd Zuki, Salleh (2019) Heat and mass transfer analysis on flow of Williamson nanofluid with thermal and velocity slips: Buongiorno model. Propulsion and Power Research, 8 (3). pp. 243-252. ISSN 2212-540X. (Published)

Kiew, Hui Hii and Vigneswaran, Narayanamurthy and Fahmi, Samsuri (2019) ECG noise reduction with the use of the ant lion optimizer algorithm. Engineering, Technology & Applied Science Research, 9 (4). pp. 4525-4529. ISSN 2241-4487 (print); 1792-8036 (online). (Published)

Kozaki, D. and Norhasmira Idayu, Harun and Chong, C. H. and Murni Hayati, Esraruddin and Nor Atiah, Yunus and Aini Syazana, Derahman and Pu, Kee Seng and Nurul Syazwani, Alias and Kumutharani, Annamalai and Sarmila, Nagappan and Mohd Hasbi, Ab. Rahim and M. M., Yusoff (2019) Identification of polluted sites in four major rivers in Kuantan, Malaysia based on water chemistry estimates of aquatic microbial activity. Sustainability, 11 (14). pp. 1-19. ISSN 2071-1050. (Published)

Kunwar, Ria and Harilal, Midhun and Krishnan, Syam G. and Pal, Bhupender and Izan Izwan, Misnon and Mariappan, C. R. and Ezema, Fabian I. and Elim, Hendry Izaac and Yang, Chun-Chen and Rajan, Jose (2019) Pseudocapacitive charge storage in thin nanobelts. Advanced Fiber Materials, 1 (3-4). pp. 205-213. ISSN 2524-7921. (Published)

Lai, Kok Yee and Tan, Lit Ken and Asako, Yutaka and Lee, Kee Quen and Chuan, Zun Liang and Wan Nur Syahidah, Wan Yusoff and Homma, Koji and Arada, Gerald Pacaba and Gan, Yee Siang and Tey, Wah Yen and Kong, Calvin Leng Sing and Kamadinata, Jane Oktavia and Taguchi, Akira (2019) Cloud optical depth retrieval via sky’s infrared image for solar radiation prediction. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). pp. 1-14. ISSN 2289-7879. (Published)

Latifah Naina, Mohamed and Fernando, Yudi and Muhammad Shabir, Shaharudin (2019) Extended eco-efficient supply chain integration management model: A research note. Journal of Governance & Integrity, 3 (1). pp. 100-110. ISSN 2600-7479. (Published)

Law, Woon Phui and Norliyana, Erain and Noram Irwan, Ramli and Jolius, Gimbun (2019) Assessment of chlorine leak dispersion around Gebeng industrial area and potential evacuation route. Atmospheric Research, 216. pp. 117-129. ISSN 0169-8095. (Published)

Lim, Qian Pink and Darun, Mohd Ridzuan and Nawanir, Gusman and Chiam, Kee Swan (2019) Way to go: Mirroring real experiences of the escape rooms. International Journal of Innovative Technology and Exploring Engineering, 8 (12S2). pp. 1-12. ISSN 2278-3075. (Published)

M. A. H., M. Hanoin and N. S., Mohammed and M. A. I., Z. Arris and A. I., Abu Bakar and Nadzirah, Mohd Mokhtar and Amir, Abdul Razak (2019) Fabrication and performance evaluation of Integrated Solar Driven Membrane Distillation System with Serpentine-shape of Flat Plate Solar Collector for Seawater Desalination. Journal of Applied Membrane Science & Technology, 23 (3). pp. 49-63. ISSN 2600-9226. (Published)

M. K. K., Fazlul and Y., Farzana and A., Najnin and M. A., Rashid and M. H. M., Nazmul (2019) Detection of CTX-M-type ESBLs from escherichia coli clinical isolates from a Tertiary Hospital, Malaysia. Baghdad Science Journal, 16 (3). pp. 682-688. ISSN 2078-8665. (Published)

M. R., Kamaruzaman and Chin, S. Y. and Pui, E. C. L. and Prasetiawan, H. and Azizan, N. (2019) Synthesis of Biobased Polyester Polyol through Esterification of Sorbitol with Azelaic Acid Catalyzed by Tin(II) Oxide: A Kinetic Modeling Study. Industrial and Engineering Chemistry Research, 58 (2). pp. 510-516. ISSN 0888-5885. (Published)

M. Z., Sharif and Azmi, W. H. and A. A. M., Redhwan and R., Mamat and Najafi, G. (2019) Energy saving in automotive air conditioning system performance using SiO2/PAG nanolubricants. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1285-1297. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Ma, Quanjin and Rejab, M. R. M. and Idris, Mat Sahat and Zhang, Bo and Manoj Kumar, Nallapaneni (2019) Filament winding technique: SWOT analysis and applied favorable factors. SCIREA Journal of Mechanical Engineering, 2 (1). pp. 15-25. (Published)

Mahyuddin, Ismail and Nurkarimah, Yusof and Anita, Abdul Rani and Jahid, Sidek (2019) Subconscious Mind: A Perspective from Aqidah, Sharica, and Tasawwuf. Humanities & Social Sciences Reviews, 7 (4). pp. 555-558. ISSN 2395-6518. (Published)

Majid, Ahmad A. A. and Tanner, Braeden and Koh, Carolyn A. (2019) Cyclopentane hydrate slurry viscosity measurements coupled with visualization. Molecular Physics, 117 (23-24). pp. 3860-3870. ISSN 0026-8976. (Published)

Mezhuyev, Vitaliy and Sadat, M. S. Nazmus and Rahman, Md. Arafatur and Refat, Nadia and Asyhari, A. Taufiq (2019) Evaluation of the likelihood of friend request acceptance in online social networks. IEEE Access, 7. pp. 75318-75329. ISSN 2169-3536. (Published)

Mohamad Nawawy, Jusoh and Fatmawati, Latada (2019) Kemahiran kehidupan ibu tinggal terhadap kesejahteraan keluarga. Jurnal Dunia Pengurusan, 1 (3). pp. 36-44. ISSN 2682-8251. (Published)

Mohammad, Aslam and Senthil Kumar, T. and Shahryar, Sorooshian (2019) Social Versus Financial Performance of Microfinance: Bangladesh Perspective. Research in World Economy, 10 (3). pp. 263-272. ISSN 1923-3981. (Published)

Mohammad, Mahgoub Kamel Mahmoud and Nik Aloesnita, Nik Mohd Alwi (2019) The impact of task complexity on EFL learners' writing production across gender. International Journal of Engineering and Advanced Technology, 8 (5). pp. 1218-1220. ISSN 2249-8958. (Published)

Mohd Amirul Hakim, Sidek and R. M., Yunus and Ahmad Khan, Mohamad Al-Nizar Khan and Islam, Muhammad Remanul (2019) Industrial operation feasibility for red gypsum-based brick manufacturing. Asian Journal of Applied Sciences, 7 (4). pp. 1-23. ISSN 2321-0893. (Published)

Mohd Amirul Hakim, Sidek and R. M., Yunus and Ahmad Khan, Mohamad Al-Nizar Khan and Islam, Muhammad Remanul (2019) Optimization of processing parameters of red gypsum-based brick manufacturing using response surface methodology. Asian Journal of Applied Sciences, 7 (4). pp. 505-512. ISSN 2321-0893. (Published)

Mohd Azrul Hisham, Mohd Adib and Khairul Shah, Affendy Yakof and Zulfikar, Anuar and Nizam, Abdullah and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2019) The cardio vascular simulator (CardioVASS) device on monitoring the physiology of blood flow circulation via angiographic image for medical trainee. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 103-111. ISSN 2289-7879. (Published)

Mohd Faisal, Farhan and Nor Sakinah, Abdul Shukor and Mohd Ashraf, Ahmad and Mohd Helmi, Suid and Mohd Riduwan, Ghazali and Mohd Falfazli, Mat Jusof (2019) A simplify fuzzy logic controller design based safe experimentation dynamics for pantograph-catenary system. Indonesian Journal of Electrical Engineering and Computer Science, 14 (2). pp. 903-911. ISSN 2502-4752. (Published)

Mohd Faizul Farhan, Ahmad Hamidi and W. S., Wan Harun and Nur Zalikha, Khalil and Samykano, Mahendran (2019) Microstructural comparison and mechanical properties of stainless steel 316L fabricated by selective laser melting and metal injection moulding processes. International Journal of Manufacturing Technology and Management, 33 (1/2). pp. 76-87. ISSN 1368-2148. (Published)

Mohd Fauzi, Mohamad Yusof and Abu Zaharin, Ahmad (2019) Enrollment Issue, Power Energy Management Approach and Structure of Control of Renewable Energy Microgrid: A Review. International Journal of Engineering Technology And Sciences (IJETS), 6 (2). pp. 12-27. ISSN 2289-697X. (Published)

Mohd Fauzi, Mohamad Yusof and Abu Zaharin, Ahmad (2019) Enrollment Issue, Power Energy Management Approach and Structure of Control of Renewable Energy Microgrid: A Review. International Journal of Engineering Technology And Sciences (IJETS), 6 (2). pp. 12-27. ISSN 2289-697X. (Published)

Mohd Yuhyi, Mohd Tadza and Tengku Hafidatul Husna, Tengku Anuar and Fadzil, Mat Yahaya (2019) Investigation on Electrically Conductive Aggregates as Grounding Compound Produced by Marconite. Civil and Environmental Engineering Reports, 29 (3). pp. 86-96. ISSN 2450-8594. (Published)

Mohd Zulkifli, Mohamad Noor and Wong, Yi Teng and Sonny, Irawan (2019) Stabilization of silicone dioxide nanoparticle foam in tertiary petroleum production. Indonesian Journal of Chemistry, 19 (4). pp. 985-992. ISSN 1411-9420 (Print); 2460-1578 (Online). (Published)

Mudassir, Jahanzeb and Yusrida, Darwis and Suriani, Muhamad and Khan, Arshad Ali (2019) Self-assembled insulin and nanogels polyelectrolyte complex (Ins/NGs-PEC) for oral insulin delivery: Characterization, lyophilization and in-vivo evaluation. International Journal of Nanomedicine, 14. pp. 4895-4909. ISSN 1178-2013. (Published)

Muhamad Atif, Mohamed and Norazlianie, Sazali (2019) Polyimide-based Carbon Membrane: Effect of Coating Times on Helium Separations. Journal of Advanced Research in Applied Mechanics, 64 (1). pp. 1-6. ISSN 2289-7895. (Published)

Muhammad Azizur Rahman, Ramli and Mansor, Sulaiman and Noor Faezah, Basary (2019) The role of Majallah Ahkam Al-Adliyyah in developing conceptual sukuk model based on maqasid shariah: A qualitative study. International Journal of Advanced Research in Economics and Finance, 1 (1). pp. 29-37. ISSN 2682 - 812X. (Published)

Muzamir, Hasan and Ieszaliana, Ali and Hyodo, Masayuki (2019) Strength of soft clay reinforced with 10 mm single crushed coconut shell (CCS) column. International Journal of GEOMATE, 17 (63). pp. 353-359. ISSN 2186-2982 (print); 2186-2990(online). (Published)

N.A.S, Muhamad and Nadzirah, Mohd Mokhtar and Rosmawati, Naim and Lau, Woei Jye and A.F., Ismail (2019) A review of membrane distillation process: - Before, during and after testing. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 62-81. ISSN 2289-697X (Print); 2462-1269 (Online). (Published)

N.M.Z.A., Mustapha and M.H. Suid, Suid and R.M.T., Raja Ismail and A.N.K., Nasir and M.A. Ahmad, Ahmad and M.Z., Mohd Tumari and J. J., Jui (2019) A data-driven PID controller for flexible joint manipulator using normalized simultaneous perturbation stochastic approximation. Journal of Advanced Manufacturing Technology, 13 (2). pp. 143-154. ISSN 2289-8107. (Published)

Narayanamurthy, Vigneswaran and Fahmi, Samsuri and Firus Khan, Al'aina Yuhainis and Hairul Aini, Hamzah and Madia Baizura, Baharom and Kumary, T. V. and Anil Kumar, P. R. and Raj, Deepa K. (2019) Direct cell imprint lithography in superconductive carbon black polymer composites: Process optimization, characterization and in vitro toxicity analysis. Bioinspiration & Biomimetics, 15 (016002). pp. 1-19. ISSN 1748-3190. (Published)

Nithya Dewi, Subramaniam Chetty and Lina, Handayani and Noor Azida, Sahabudin and Zuraina, Ali and Norhasyimah, Hamzah and Nur Shamsiah, Abdul Rahman and Shahreen, Kasim (2019) Learning styles and teaching styles determine students’ academic performances. International Journal of Evaluation and Research in Education (IJERE), 8 (4). pp. 610-615. ISSN 2252-8822. (Published)

Noor Raihana, Abu Sepian and Nur Hidayah, Mat Yasin and N., Zainol and N. H., Rushan and A. L., Ahmad (2019) Fatty acid profile from immobilised Chlorella vulgaris cells in different matrices. Environmental Technology, 40 (9). pp. 1-9. ISSN 0959-3330. (Published)

Noor Syahirah, Nordin and Mohd Arfian, Ismail and Mezhuyev, Vitaliy and Shahreen, Kasim and Mohd Saberi, Mohamad and Ashraf Osman, Ibrahim (2019) Fuzzy modelling using firefly algorithm for phishing detection. Advances in Science, Technology and Engineering Systems Journal, 4 (6). pp. 291-296. ISSN 2415-6698. (Published)

Nor Mahirah, Mustapha and Sorooshian, Shahryar (2019) SME Performance Measurement: A Technical Review of Malaysia. International Journal of Innovative Technology and Exploring Engineering, 8 (8). pp. 1808-1812. ISSN 2278-3075. (Published)

Norbaizurah, Rahman and Amalina Hanani, Ismail and Kusbiantoro, Andri (2019) Effect of Dipotassium Hydrogen Phosphate and Calcium Nitrate on Strength and Microstructural Properties of Geopolymer Mortar. Key Engineering Materials. ISSN 1013-9826 (print); 1662-9795 (online). (In Press / Online First) (In Press / Online First)

Norhafzan, Junadi and Beg, M. D. H. and R. M., Yunus and Ridzuan, Ramli and Zianor Azrina, Z. A. and Alam, A. K. M. Moshiul (2019) Characterization of microcrystalline cellulose isolated through mechanochemical method. Indian Journal of Fibre & Textile Research (IJFTR), 44 (4). pp. 442-449. ISSN 0975-1025. (Published)

Norhidayah, Mohamad Nawawy and Hasan, Ahmad (2019) Permasalahan akidah di kalangan transgender mak nyah muslim. Jurnal Dunia Pengurusan, 1 (1). pp. 25-43. ISSN 2682-8251. (Published)

Norlin, Pauzi and Norashikin, Mat Zain and Nurul Amira, Ahmad Yusof (2019) Gum arabic as natural stabilizing agent in green synthesis of ZnO nanofluids for antibacterial application. Journal of Environmental Chemical Engineering, 8 (103331). pp. 1-7. ISSN 2213-3437. (Published)

Norlin, Pauzi and Norashikin, Mat Zain and Nurul Amira, Ahmad Yusof (2019) Microwave-Assisted Synthesis for Environmentally ZnO Nanoparticle Synthesis. Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018, 538. pp. 541-546. (Published)

Norsafiah, Fazli and Noor Sabrina, Ahmad Mutamim and Shem, Chan Yung and Syarifah, Abd Rahim (2019) Bioelectrochemical cell (BeCC) integrated with Granular Activated Carbon (GAC) in treating spent caustic wastewater. Journal of the Taiwan Institute of Chemical Engineers, 104. pp. 114-122. ISSN 1876-1070. (Published)

Nour, A. H. and Zaki, Yasmeen Hafiz and Mohamed, Hybat Salih and Rassem, Hesham H. A. (2019) The potentials of an Integrated Ultrasonic Membrane Anaerobic System (IUMAS) in treating sugar cane wastewater. Indonesian Journal of Chemistry, 19 (3). pp. 804-810. ISSN 1411-9420 (Print); 2460-1578 (Online). (Published)

Nur Farahin, Ishak and Nor Akmar, Mohd Yahya and Mohd Hanif, Yaacob and Auni Hamimi, Idris and Harun, S. W. and Norazlina, Saidin (2019) Optical fiber coated Zinc Oxide (ZnO) nanorods decorated with Palladium (Pd) for hydrogen sensing. Optical Materials, 96 (109291). pp. 1-7. ISSN 0925-3467. (Published)

Nur Farha, Shaafi and Saifful Kamaluddin, Muzakir and Bouchta, Sahraoui (2019) A study of the electron regeneration efficiency of solar cells fabricated using CMC/PVA-, Alginate-, and Xanthan-based electrolytes. Makara Journal of Technology, 23 (2). pp. 53-58. ISSN P-ISSN: 2355-2786 E-ISSN: 2356-4539. (Published)

Nur Hanani, Rushan and Nur Hidayah, Mat Yasin and Noor Raihana, Abu Sepian and Farhan, Mohd Said and Nurafifah Izzati, Shafei (2019) Effect of immobilization method on the growth of chlorella vulgaris and fatty acid profile for biodiesel production. Indonesian Journal of Chemistry, 19 (3). 767 -776. ISSN 1411-9420 (Print); 2460-1578 (Online). (Published)

Nur Nabillah, Mohd Arif and Sumaiya, Zainal Abidin and Osazuwa, Osarieme U. and Vo, Dai-Viet N. and Mohammad Tazli, Azizan and Taufiq Yap, Yun-Hin (2019) Hydrogen production via CO2 dry reforming of glycerol over Resingle bondNi/CaO catalysts. International Journal of Hydrogen Energy, 44 (37). pp. 20857-20871. ISSN 0360-3199. (Published)

Nur Nadiatul Hidayah, Shaikh Rohmat and Sumaiya, Zainal Abidin (2019) Extraction of light, medium and heavy rare-earth elements using synergist extractants developed from ionic liquid and conventional extractants. Comptes Rendus Chimie, 22 (11-12). pp. 728-744. ISSN 1631-0748. (Published)

Nur Suhaila, Anang Japar and Mohd Aizudin, Abd Aziz and Mohd Najib, Razali and Nur Aini Liyana, Zakaria and Nurul Waheeda, Abdu Rahman (2019) Preparation of Grease using Organic Thickener. Materials Today: Proceedings, 19 (Part 4). pp. 1303-1308. ISSN 2214-7853. (Published)

Nur Syawanie, Manam and W. S., Wan Harun and Mohd Halim Irwan, Ibrahim and Nur Zalikha, Khalil and Samykano, Mahendran (2019) Sintering temperature effects on the properties of stainless steel 316L compact fabricated by metal injection moulding. International Journal of Manufacturing Technology and Management, 33 (1/2). pp. 37-52. ISSN 1368-2148. (Published)

Nur Yani, Che Hussin (2019) Penggunaan alat EmWave Biofeedback untuk melihat kesan tafakur visual terhadap tekanan. Jurnal al-Sirat, 1 (18). pp. 47-56. ISSN 1823-4313. (Published)

Nurmunira, Muhammad and Siddiqua, Sumi (2019) Stabilization of silty sand using bentonite magnesium-alkalinization: Mechanical, physicochemical and microstructural characterization. Applied Clay Science, 183 (105325). pp. 1-12. ISSN 0169-1317. (Published)

Nurul Asmawati, Roslan and Nur Nabillah, Mohd Arif and Jessy, Lynn Jaspin and Nurul Aini, Mohamed Razali and Sumaiya, Zainal Abidin (2019) Hydrogen production by glycerol dry reforming over rhenium promoted Ni-based catalyst supported on Santa Barbara Amorphous 15 (SBA-15). Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. pp. 1-13. ISSN 1556-7036 (Print); 1556-7230 (Online). (In Press / Online First) (In Press / Online First)

Nurul Atikah, Mohd Rodzri and Salwani, Md Zain and Rafidah, Mohamed Ali Hanapiah and Rozaimi, Abu Samah and R. M., Illias (2019) Effect of physical parameters on ᴅ-xylonic acid production using recombinant E. coli BL21 (DE3). Materials Today: Proceedings, 19 (4). pp. 1247-1254. ISSN 2214-7853. (Published)

Nurulfadzilah, Hassan and Nurul Hazlina, Noordin and Mohamad Shaiful, Abdul Karim and Mohd Ruzaimi, Mat Rejab and Ma, Quan Jin (2019) Dielectric properties of epoxy–barium titanate composite for 5 GHz microstrip antenna design. SN Applied Sciences, 2 (62). pp. 1-8. ISSN 2523-3963 (Print); 2523-3971 (Online). (Published)

Olalere, Olusegun Abayomi and Nour, A. H. and Gan, Chee Yuen (2019) Microwave-enhanced extraction and mass spectrometry fingerprints of polyphenolic constituents in sesamum indicum leaves. Industrial Crops and Products, 131. pp. 151-159. ISSN 0926-6690. (Published)

Olalere, Olusegun Abayomi and Nour, A. H. and R. M., Yunus and Alara, Oluwaseun Ruth (2019) Parameters affecting antiradical, elemental composition and microstructural elucidation in the heat reflux extraction of dried piper nigrum seedlings. Jundishapur Journal of Natural Pharmaceutical Products, 14 (2). pp. 1-7. ISSN 1735-7780. (Published)

Omer, Manal Suliman and Adeleke, A. Q. (2019) Systematic critical review of Risk Management in Malaysian construction companies. Journal of Humanities and Social Sciences Studies (JHSS), 1 (5). pp. 60-70. ISSN 2663-7197. (Published)

Omer, Manal Suliman and Adeleke, A. Q. and Lee, Chia Kuang (2019) Level of risk management practice in Malaysia construction industry from a knowledge-based perspective. Journal of Architecture, Planning & Construction Management, 9 (1). pp. 112-129. (Published)

Omran, Mohamed Asghaiyer and Izzeldin, I. Mohd and Abu Zaharin, Ahmad and Salem, Mohamed and Almelian, Mohamad Milood and Awang, Jusoh and Sutikno, Tole (2019) Comparisons of PI and ANN controllers for shunt HPF based on STF-PQ Algorithm under distorted grid voltage. International Journal of Power Electronics and Drive System (IJPEDS), 10 (3). pp. 1339-1346. ISSN 2088-8694 (print); 2088-8694 (online). (Published)

Ong, Huei Ruey and Ponnarasy, Ganasen and Kalam, Md. Abul and Ethiraj, Baranitharan and Mohd Sabri, Mahmud and Khan, Maksudur R. (2019) Effect of light irradiation on esterification of oleic acid with ethanol catalyzed by immobilized Pseudomonas cepacia lipase. Canadian Journal of Chemical Engineering, 97 (11). pp. 2876-2882. ISSN 0008-4034. (Published)

Priyatharishini, Mardarveran and N. M., Mohktar and Risky Ayu, Kristanti (2019) Study on the Effectiveness of Banana Peel Coagulant in Turbidity Reduction of Synthetic Wastewater. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 82-90. ISSN 2289-697X. (Published)

Puteri Emme Marina, Mohamad and Ali, Gomaa A. M. and See, Li Min and Teo, Ellie Yi Lih and Ng, Eng-Poh and Chong, Kwok Feng (2019) In situ growth of redox-active iron-centered nanoparticles on graphene sheets for specific capacitance enhancement. Arabian Journal of Chemistry, 12 (8). pp. 3883-3889. ISSN 1878-5352. (Published)

Putra Jaya, Ramadhansyah and Mohd Rosli, Hainin and Khairil Azman, Masri and Youventharan, Duraisamy and Ekarizan, Shaffie (2019) Performance of Charcoal Coconut Shell Ash in the Asphalt Mixture under Long Term Aging. International Journal of Recent Technology and Engineering, 8 (3S3). pp. 383-387. ISSN 2277-3878. (Published)

Rahiwan Nazar, Romli and Mohamad Fadli, Zolkipli and Mohd Zamri, Osman (2019) Maldroid- attribute selection analysis for malware classification. Journal of Theoretical and Applied Information Technology, 97 (20). pp. 2419-2429. ISSN 1992-8645 (print); 817-3195 (online). (Published)

Rahman, Md. Arafatur and Salih, Qusay Medhat and Asyhari, A. Taufiq and Azad, Saiful (2019) Traveling distance estimation to mitigate unnecessary handoff in mobile wireless networks. Annales des Telecommunications/Annals of Telecommunications, 74 (11-12). pp. 717-726. ISSN 0003-4347 (print); 1958-9395 (online). (Published)

Ramakrishnan, Ramprasath and Ramakrishnan, Praveena and Ranganathan, Balu and Tan, Cowen and Sridhar, T. M. and Jolius, Gimbun (2019) Effect of Humidity on Formation of Electrospun Polycaprolactone Nanofiber Embedded with Curcumin using Needdleless Electrospinning. Materials Today: Proceedings, 19. 1241 - 1246. ISSN 2214-7853. (Published)

Ramalingam, Mritha and Puviarasi, R. and Chinnavan, Elanchezhian and Nur Sofea Iznie, Johan (2019) Developing a sensor based alerting system for stroke patients‟ safety. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 3646-3649. ISSN 2278-3075. (Published)

Raza, Muhammad Ahsan and Rahmah, Mokhtar and Noraziah, Ahmad and Raza, Sehrish and Roslina, Abd Hamid (2019) A Methodology for Engineering Domain Ontology using Entity Relationship Model. International Journal of Advanced Computer Science and Applications (IJACSA), 10 (8). pp. 326-332. ISSN 2156-5570(Online). (Published)

Redhwan, A. A. M. and Azmi, W. H. and Najafi, G. and M. Z., Sharif and N. N. M., Zawawi (2019) Application of response surface methodology in optimization of automotive air-conditioning performance operating with SiO2/PAG nanolubricant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1269-1283. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Rohana, Hamzah and Nurul Ain Fatehah, Baharuddin and Wan Jumani, Fauzi and Muhamad Afzamiman, Aripin (2019) The effectiveness of the leadership transformation programme among off-campus students. International Journal of Evaluation and Research in Education (IJERE), 8 (4). pp. 726-734. ISSN 2252-8822. (Published)

Ros Azlinawati, Ramli and Yuen, Mei Lian and Noraishah, Mohamad Nor and Nur Iffah Zulaikha, Azman (2019) Synthesis, characterization, and morphology study of coco peat-grafted-poly(acrylic acid)/NPK slow release fertilizer hydrogel. Journal of Polymer Research, 26 (12). ISSN 1022-9760. (Published)

Rubaiyi, M. Zaid and Mishra, Puranjan and Tabassum, Shabana and Zularisam, A. W. and Mimi Sakinah, A. M. (2019) High methoxyl pectin extracts from hylocereus polyrhizus's peels: Extraction kinetics and thermodynamic studies. International Journal of Biological Macromolecules, 141. pp. 1147-1157. ISSN 0141-8130. (Published)

Saadiah, Mohd Ali and Zhang, Dalun and Nagao, Yuki and Saifful Kamaluddin, Muzakir and Ahmad Salihin, Samsudin (2019) Reducing crystallinity on thin film based CMC/PVA hybrid polymer for application as a host in polymer electrolytes. Journal of Non-Crystalline Solids, 511. pp. 201-211. ISSN 0022-3093. (Published)

Saeed, Gamil Abdulraqeb Abdullah and Noryanti, Muhammad and Wan Nur Syahidah, Wan Yusoff (2019) Kernel Estimation in Line Transect Sampling for Parametric Model. ASM Science Journal, 12 (Special 5). pp. 137-142. ISSN 1823-6782. (Published)

Salh, Adeeb and Nor Shahida, Mohd Shah and Audah, Lukman and Abdullah, Lukman and Jabbar, Waheb A. (2019) Energy-efficient power allocation and joint user association in multiuser-downlink massive MIMO system. IEEE Access, 8. pp. 1314-1326. ISSN 2169-3536. (Published)

Sarifudin, M. S. and Mansor, M. A. (2019) Simplification of wastes for a warehouse using Boolean logic: A conceptual paper. Journal of Engineering Science and Technology, 14 (5). 2464 -2474. ISSN 1823-4690. (Published)

Sarifudin, M. S. and Mansor, M. A. and Safiei, W. (2019) Waste simplification for warehouse using Boolean logic. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 44-52. ISSN 2289-697X. (Published)

Shanono, Ibrahim Haruna and Nor Rul Hasma, Abdullah and Hamdan, Daniyal and Aisha, Muhammad (2019) Selective harmonic elimination (SHE) based 3-phase multilevel voltage source inverter (VSI) for standalone applications. SN Applied Sciences, 1 (1670). pp. 1-15. ISSN 2523-3963 (Print); 2523-3971 (Online). (Published)

Shin, Teh Muy and Asrul, Adam and Amar Faiz, Zainal Abidin (2019) A comparative study of PSO, GSA and SCA in parameters optimization of surface grinding process. Bulletin of Electrical Engineering and Informatics, 8 (3). pp. 1117-1127. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Sikder, Md. Belal Hossain and Islam, Md. Muksitu and Rashid, Shah Samiur and Moazzem, Md. Shakir (2019) Effect of shrimp chitosan coating on physicochemical properties and shelf life extension of banana. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 1-14. ISSN 2289-697X (Print), 2462-1269 (Online). (Published)

Siti Hajar, Saharudin and Jun Haslinda, Haji Shariffuddin and Noor Ida Amalina, Ahamad Nordin and Aqeela, Ismail (2019) Effect of Aging Time in the Synthesis of Biogenic Hydroxyapatite Derived from Cockle Shell. Materials Today: Proceedings, 19 (Part 4). pp. 1208-1215. ISSN 2214-7853. (Published)

Siti Hanani, Mat Yasin and Muhammad Khairul Anuar, Mohamed and Zulkhibri, Ismail and Basuki, Widodo and Mohd Zuki, Salleh (2019) Numerical solution on MHD stagnation point flow in ferrofluid with Newtonian heating and thermal radiation effect. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (1). pp. 12-22. ISSN 2289-7879. (Published)

Siti Noradila, Abdullah and Norazlianie, Sazali (2019) A mini review on low carbon steel in rapid cooling process. Journal of Advanced Research in Applied Mechanics, 63 (1). pp. 16-22. ISSN 2289-7895. (Published)

Siti Nur Amiera, Jeffry and Putra Jaya, Ramadhansyah and Mohd Rosli, Hainin and Norhidayah, Abdul Hassan and Haryati, Yaacob (2019) Effect of Nano Charcoal Ash Coconut Shell in Bitumen as Alternative Binder. International Journal of Recent Technology and Engineering, 8 (3S3). pp. 517-523. ISSN 2277-3878. (Published)

Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop and Cuce, Erdem and Solomin, Evgeny (2019) Analysis of solar PV glare in airport environment: Potential solutions. Results in Engineering, 5 (100079). pp. 1-5. ISSN 2590-1230. (Published)

Suliana, Ab‐Ghani and Hamdan, Daniyal and Nur Huda, Ramlan and Meng Chung, Tiong (2019) Online PSO‐tuned phase shift angle controller for dual active bridge DC–DC converter. SN Applied Sciences, 2 (73). pp. 1-8. ISSN 2523-3971. (Published)

Syafikah, Ayob and Nor Alisa, Mohd Damanhuri (2019) Centered fan field region under wedge indentation by numerical solution method. Test Engineering & Management, 81 (Nov/Dec). 789 -793. ISSN 0193-4120. (Published)

Syafikah, Ayob and Nor Alisa, Mohd Damanhuri (2019) Numerical approximation of plane deformation for the indentation of granular material by a smooth rigid wedge punch. Universal Journal of Mechanical Engineering, 7 (4). pp. 166-171. ISSN 2332-3353. (Published)

Syazwani, Mohd Zokri and Nur Syamilah, Arifin and Abdul Rahman, Mohd Kasim and Nurul Farahain, Mohammad and Mohd Zuki, Salleh (2019) On dissipative MHD mixed convection boundary layer flow of jeffrey fluid over an inclined stretching sheet with nanoparticles: Buongiorno model. Thermal Science, 23 (6B). 3817 -3832. ISSN 0354-9836. (Published)

Tan, Seng Teck and Subramaniam, Hemashwary and Sorooshian, Shahryar (2019) Exploring Challenges of the Fourth Industrial Revolution. International Journal of Innovative Technology and Exploring Engineering, 8 (9). pp. 27-30. ISSN 2278-3075. (Published)

Thum, Wei Seong and M. Z., Ibrahim and Mulvaney, D. J. (2019) WADA-W: A modified WADA SNR estimator for audio-visual speech recognition. International Journal of Machine Learning and Computing, 9 (4). pp. 446-451. ISSN 2010-3700. (Published)

Thuraiya, Thaim and Ruwaida, Abdul Rasid and Wan Muhamad Syafiq, Wan Ismail (2019) Torrefaction of oil palm fronds (OPF) as a potential feedstock for energy production processes. Journal of Environmental Engineering and Landscape Management, 27 (2). pp. 64-71. ISSN 1648-6897. (Published)

Turi, Jamshid Ali and Fatimah, Mahmud and Toheed, Hira and Sorooshian, Shahryar (2019) Synthetic Literature review of Organizational Forgetting. Archives of Business Research, 7 (4). pp. 203-210. ISSN 2054-7404. (Published)

Turi, Jamshid Ali and Fatimah, Mahmud and Toheed, Hira and Sorooshian, Shahryar (2019) Synthetic Review of Organizational learning. Advances in Social Sciences Research Journal, 6 (4). pp. 168-180. ISSN 2055-0286. (Published)

Turi, Jamshid Ali and KhasKhelly, Farhan Zeb and Riaz, Sakina and Shaikh, Sadia (2019) The Impact of Faculty Empowerment on Organizational Learning Effectiveness. The Women - Annual Research Journal of Gender Studies, 11 (11). pp. 30-42. (Published)

Turi, Jamshid Ali and Sorooshian, Shahryar (2019) The impact of organisational structure on organisational learning. Middle East Journal of Management, 6 (2). pp. 204-232. ISSN 2050-3644. (Published)

Turi, Jamshid Ali and Sorooshian, Shahryar and Fatimah, Mahmud and Nawanir, Gusman and Islam, A. S. M. Touhidul (2019) Philosophical prospective of organisational learning. International Journal of Knowledge and Learning (IJKL), 13 (1). pp. 1-9. ISSN 1741-1009. (Published)

V., Mansoureh Nazari and Mahmood, Syed and Subashini, Raman (2019) Comparative docking studies of rosmarinic acid and sinesitin to inhibit HSP70. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 114-119. ISSN 2289-697X. (Published)

V., Rajendaran and S. M., Saufi and M. A. K., Zahari and A. W., Mohammad (2019) Carrier selection in liquid membrane for extraction of levulinic acid using hybrid graphene-polyethersulfone supported liquid membrane. Materials Today: Proceedings, 17. pp. 1117-1125. ISSN 2214-7853. (Published)

V., Rajendaran and S. M., Saufi and M. A. K., Zahari and A. W., Mohammad (2019) Study on stripping phase conditions on the levulinic acid extraction using supported liquid membrane. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5625 -5636. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Vasu, Anusuiah and Hagos, F. Y. and R., Mamat and Kaur, Jesbains and M. M., Noor (2019) The effect of thermal cyclic variation on the thermophysical property degradation of paraffin as a phase changing energy storage material. Applied Thermal Engineering, 149. pp. 22-33. ISSN 1359-4311. (Published)

Veerendra, A. S. and Mohd Rusllim, Mohamed and M. H., Sulaiman and Peddakapu, K. and Sudhakar, K. and Sukumaran, Sreenath (2019) Speed regulation enhancement for SRM drive in PHEV applications by using hybrid fuzzy logic controller. International Journal of Recent Technology and Engineering, 8 (2). pp. 526-533. ISSN 2277-3878. (Published)

Vorathin, E. and Z. M., Hafizi and N., Ismail and M., Loman and A. M., Aizzuddin and K. S., Lim and H., Ahmad (2019) FBG Water-Level Transducer Based on PVC-Cantilever and Rubber-Diaphragm Structure. IEEE Sensors Journal, 19 (17). pp. 7407-7414. ISSN 1530-437X. (Published)

Wan Muhamad Syafiq, Wan Ismail and Thuraiya, Mohammad Thaim and Ruwaida, Abdul Rasid (2019) Biomass gasification of oil palm fronds (OPF) and Koompassia malaccensis (Kempas) in an entrained flow gasifier: A performance study. Biomass and Bioenergy, 124. pp. 83-87. ISSN 0961-9534. (Published)

Wan Nadja, Julika and Azilah, Ajit and Ahmad Ziad, Sulaiman and Aishath, Naila (2019) Physicochemical and Microbiological Analysis of Stingless Bees Honey Collected from Local Market in Malaysia. Indonesian Journal of Chemistry, 19 (2). pp. 522-530. ISSN 1411-9420 (Print); 2460-1578 (Online). (Published)

Wan Nur Aifa, W. A. and Putra Jaya, Ramadhansyah and Mohd Rosli, Hainin and Mohd Rosli, Mohd Hasan and Ekarizan, Shaffie (2019) X-Ray Diffraction Analysis of Bitumen Containing Untreated and Treated Waste Cooking Oil. International Journal of Recent Technology and Engineering, 8 (3S3). pp. 434-437. ISSN 2277-3878. (Published)

Wan Nurain Farahah, Wan Basri and Hanita, Daud and Lam, Man Kee and Cheng, C. K. and Oh, Wen Da and Tan, Wen Nee and Maizatul Shima, Shaharun and Yeong, Yin Fong and Ujang, Paman and Kusakabe, Katsuki and Evizal, Abdul Kadir and Show, Pau Loke and Lim, Jun Wei (2019) A sugarcane-bagasse-based adsorbent employed for mitigating eutrophication threats and producing biodiesel simultaneously. Processes, 7 (9). pp. 1-13. ISSN 2227-9717. (Published)

Wan Zulaisa Amira, Wan Jusoh and Sunarti, Abd Rahman and A. L., Ahmad and N. M., Mohktar (2019) Radial Distribution Function Analysis of the Polyamide Thin Film Composite formation using Trimesoyl Chloride and Piperazine. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 55-61. ISSN 2289-697X. (Published)

Wan Zulaisa Amira, Wan Jusoh and Sunarti, Abd Rahman and Abdul Latif, Ahmad and Nadzirah, Mohd Mokhtar (2019) Data for molecular recognition between polyamide thin film composite on the polymeric subtract by molecular dynamic. Data in Brief, 24 (103910). pp. 1-7. ISSN 2352-3409. (Published)

Wan Zulaisa Amira, Wan Jusoh and Sunarti, Abd Rahman and Abdul Latif, Ahmad and Nadzirah, Mohd Mokhtar (2019) Fabrication and characterisation of a polyamide thin-film composite membrane on a nylon 6,6 substrate for isopropanol dehydration. Comptes Rendus Chimie. pp. 1-6. ISSN 1631-0748. (In Press / Online First) (In Press / Online First)

Wan Zulaisa Amira, Wan Jusoh and Sunarti, Abd Rahman and Alia Aqilah, Ghazali (2019) Effect of Adipic Acid Concentration on the Isotactic Polypropylene Flat Sheet Using Methyl Salicylate Prepared by TIPS for CO2/N2 Separation. Journal of Physical Science, 30 (3). pp. 157-173. ISSN 1675-3402 (print); 2180-4230 (online). (Published)

Wan Zulaisa Amira, Wan Jusoh and Sunarti, Abdul Rahman and Abdul Latif, Ahmad and Nadzirah, Mohd Mokhtar (2019) Molecular recognition and interaction of polyamide thin film composite on the hydrophobic and hydrophilic polymeric subtract. Materials today proceedings, 19 (4). pp. 1151-1158. ISSN 2214-7853. (Published)

Yau’ Mee Hayati, Hj Mohamed Yusof and Ruzaini, Abdullah Arshah and Awanis, Romli (2019) Development of multi criteria tacit knowledge acquisition framework (MC-TKAF) to support talent development intervention program in a Malaysian comprehensive university. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.4 S1). pp. 490-500. ISSN 2278-3091. (Published)

Yeong, Yi Ling and Pang, Sook Fun and Afiqah, Yeop and M. M., Yusoff and Jolius, Gimbun (2019) Assessment of Maceration, Ultrasonic and Microwave Assisted Extraction for Total Phenolic Content, Total Flavonoid Content and Kaempferol Yield from Cassia alata via Microstructures Analysis. Materials Today: Proceedings, 19 (Part 4). 1273 - 1279. ISSN 2214-7853. (Published)

Zaid, Aziz Qannaf and Suriati, Ghazali (2019) Dataset on physicochemical properties of particle-sized moringa oleifera seed cake and its application as bio-coagulants in water treatment application. Chemical Data Collections, 24. pp. 1-2. ISSN 2405-8300. (Published)

Zaid, Aziz Qannaf and Suriati, Ghazali and Noor Sabrina, Ahmad Mutamim and Olalere, Olusegun Abayomi (2019) Experimental optimization of Moringa oleifera seed powder as bio-coagulants in water treatment process. SN Applied Sciences, 1 (504). pp. 1-5. ISSN 2523-3963 (Print); 2523-3971 (Online). (In Press / Online First) (In Press / Online First)

Zaied, Khalid and Siddique, Md. Nurul Islam and Mohd, Nasrullah and Singh, Lakhveer and Zularisam, A. W. and Mohd. Fadhli, Ahmad (2019) Application of solar assisted bioreactor for biogas production from palm oil mill effluent co-digested with cattle manure. Environmental Technology & Innovation, 16. pp. 1-12. ISSN 2352-1864. (Published)

Zulkifli, Siti Norfatihah and Md Sarif, Norhafizah and Salleh, M. Z. (2019) Numerical solution of boundary layer flow over a moving plate in a nanofluid with viscous dissipation: A revised model. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (2). pp. 287-295. ISSN 2289-7879. (Published)

Book Chapter

Ahmad Razlan, Yusoff and Syh Kai, Lim (2019) Microstructure and mechanical properties of boron sheet metal steels in hot press forming process with nanofluid as coolant. In: Reference Module in Materials Science and Materials Engineering. Elsevier, pp. 1-15. ISBN 978-0-12-803581-8

Al-haimi, Basheer and Daing Nasir, Ibrahim and Ab Hamid, Mohd Rashid (2019) Replicating Malaysian Model of Building World-Class Universities Across Yemen. In: Advancements in Global Business Research Across Emerging Countries: Monograph Book. McGraw Hill Education (India) Private Limited, India, pp. 294-312. ISBN 978-93-5316-740-0

Conference or Workshop Item

A. I., Ramadhan and W. H., Azmi and R., Mamat and K. A., Hamid and Norsakinah, S. (2019) Investigation on stability of tri-hybrid nanofluids in water-ethylene glycol mixture. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012068). ISSN 1757-899X (Published)

A. L., Amminudin and Putra Jaya, Ramadhansyah and Doh, Shu Ing and S. A., Mangi and W. I., Mohd Haziman (2019) Effect of dried sewage sludge on compressive strength of concrete. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 297-303.. (Published)

A. M., Faten Albtoush and R. A., Bahamid and Doh, Shu Ing and A. R., Rahimi and Saad, M. Syamsyul H. and S. Adilen, Lucia (2019) A review on causes of cost overrun in the construction projects. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 162-172.. (Published)

A. R., Radzi and Abdul Rahimi, Abdul Rahman and Doh, Shu Ing and M., Esa (2019) Construction readiness parameters for highway projects. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 195-204.. (Published)

A. S., Bawono and Mohamad Idris, Ali and S., Kusumadew and Noram Irwan, Ramli (2019) Methodological study to classification of damage state immediately subsequent to the Banjarnegara Indonesia earthquake on 2018. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 221-226.. (Published)

Abdul Rahman, R. N. U. and Ruwaida, A. R. and Ismail, M. (2019) Effect of temperature and residence time on the characteristics of torrefied food. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-11., 702 (1). ISSN 1757-8981 (Published)

Abu, Noratikah and Megat Muainuddin, Megat Muhammad Afif and Wan Yusoff, Wan Nur Syahidah and Ismail, Zuhaimy (2019) Ecotourism demand forecasting at National Park, Kuala Tahan, in Pahang. In: 9th Int. Conf. on Geotechnique, Construction Materials and Environment , 20 - 22 November 2019 , Hotel Continental Fuchu in Tokyo, Japan. pp. 1266-1270.. ISBN 978-4-909106025 (Submitted) (Submitted)

Adam Shariff Adli, Aminuddin and Ku Muhammad Naim, Ku Khalif and Fadhilah, Che Jamil and Nur Izzati, Jaini (2019) Fuzzy analytic hierarchy process using intuitive vectorial centroid for eco-friendly car selection. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019) , 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 1366 (012076). ISSN 1742-6596 (Published)

Ahmad, M. S. and Cheng, C. K. and Ong, Huei Ruey and Abdullah, H. and Khan, Maksudur R. (2019) Electro-oxidation of renewable glycerol to value added chemicals over phosphorous-doped Pt/MCNTs nanoparticles. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-12., 702 (012025). ISSN 1757-899X (Published)

Ahmad, Nafees and Ruwaida, Abdul Rasid (2019) Study of natural gas powered solid oxide fuel cell simulation and modeling. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-17., 702 (012017). ISSN 1757-8981 (Published)

Ahmad Azwan, Abdul Razak and Ahmad Nor Kasruddin, Nasir and Mohd Falfazli, Mat Jusof and Shuhairie, Mohammad and Nurul Amira, Mhd Rizal (2019) Opposition based Spiral Dynamic Algorithm with an Application to a PID Control of a Flexible Manipulator. In: 9th IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2019) , 29 November - 1 December 2019 , Penang, Batu Ferringhi. pp. 126-130. (19533470). ISBN 978-1-7281-3500-7 (Published)

Ahmad Fauzi, Fudzin and Ainul Akmar, Mokhtar and Mohd Amin, Abd Majid and Azizul Qayyum, Basri (2019) Analytical hierarchy process application of body in white modular sub-assembly for automotive manufacturing in Malaysia - A case study. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012004). ISSN 1757-899X (Published)

Ahmad Fikri Hadi Abdul, Rahman and Mohd Yusri, Mohd Yunus and Tengku Siti Laila Maisarah, Tengku Ahmad Nasaruddin and Noorlisa, Harun and Mazrul Nizam, Abu Seman (2019) Performance profiling of UV-grafted forward osmosis polyethersulfone membrane using multivariate classical scaling technique. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012043). ISSN 1757-8981 (Published)

Ahmad Huzaimi, Abd Jamil and Mohamad Syazli, Fathi (2019) Contractual issues for building information modelling (BIM)-based construction projects: An exploratory case study. In: IOP Conference Series: Materials Science and Engineering, 10th Asia Pacific Structural Engineering and Construction Conference 2018 , 13-15 November 2018 , Langkawi, Malaysia. pp. 1-9., 513 (012035). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Ahmad Izul Fakhruddin, Azimi and Norazaliza, Mohd Jamil (2019) Nonlinear partial differential equations model related to ethanol production. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019) , 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-12., 1336 (012051). ISSN 1742-6588 (Published)

Ahmad Nasser, Mohd Rose and N. M. Z., Nik Mohamed and M. F. F., Ab Rashid and Hafizzudin, Mohd Noor and Alias, Mohd (2019) Improving productivity using value stream mapping (VSM) - a case study. In: 4th International Conference on Engineering Technology (ICET 2019) , 6-7 July 2019 , DITC, Kemaman, Terengganu. pp. 1-5.. (Unpublished) (Unpublished)

Ahmad Nazrie, Mohd Nor and T., Senthil Kumar (2019) The chronology of microfinance development in Malaysia : a review. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1271-1284., 2019. ISSN 2518-668X (Published)

Ahmad Zairi, Mohd Zain and Mohd Ashraf, Ahmad (2019) A salp swarm algorithm to improve power production of wind plant. In: International Conference on Electrical, Control and Computer Engineering 2011 (InECCE 2011). , 21-22 June 2011 , Hyatt Regency, Kuantan, Pahang, Malaysia. pp. 1-7.. (Unpublished) (Unpublished)

Ahmed Zainul, Abideen and Fazeeda, Mohamad (2019) Empowering supply chain through discrete-event and agent-based simulation – A systematic review and bibliometric analysis. In: 2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies, CSUDET 2019 , 7-9 November 2019 , Penang. pp. 69-74. (9214764). ISBN 978-172813276-1 (Published)

Ahmed Zainul, Abideen and Fazeeda, Mohamad (2019) Improving pharmaceutical warehouse supply chain lead time – From production to cross-docking. In: 2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies, CSUDET 2019; , 7-9 November 2019 , Penang. pp. 63-68. (9214732). ISBN 978-172813276-1 (Published)

Aiman Awadh Saleh, Mokaizh and Nurdiana, Wirman and Jun Haslinda, Shariffuddin (2019) Synthesis of alumina from aluminium can waste to be applied as catalyst support for biodiesel production. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-12., 702 (012038). ISSN 1757-8981 (Published)

Aishah, Abdul Aziz and Wan Muhammad Noor Sarbani, Mat Daud and Sorooshian, Shahryar (2019) Exploring quality influencing factors for frozen food industry. In: IOP Conference Series: Materials Science and Engineering; 4th International Conference on Ergonomics and 2nd International Conference on Industrial Engineering, ICE and ICIE 2019 , 27 - 28 August 2019 , Kuala Terengganu, Terengganu. pp. 1-6., 697 (1). ISSN 1757-8981 (Published)

Al-Qaysi, Noor and Mohamad-Nordin, Norhisham and Al-Emran, Mostafa and Al-Sharafi, Mohammed A. (2019) Understanding the differences in students' attitudes towards social media use: A case study from Oman. In: 17th IEEE Student Conference on Research and Development, SCOReD 2019 , 15-17 October 2019 , Perak, Malaysia. pp. 176-179. (8896251). ISBN 978-1-7281-2613-5 (Published)

Al-haimi, Basheer and Daing Nasir, Ibrahim and Ab Hamid, Mohd Rashid (2019) An investigation of the current autonomy status of the Malaysian public and private universities: an empirical result. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 347-367.. ISSN 2518-668X (Published)

Alagorni, Abubaker H. and Zulkefli, Yaacob and Nour, A. H. and Radzuan, Junin (2019) Effect of Water Alternating Gas (WAG-N2 ) after Water or Gas Flooding on Crude Oil Recovery in Sandstone Reservoirs. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-15., 736 (022015). ISSN 1757-899X (Published)

Alajmi, Qasim and Al-Nuaimy, Louay A. and Arul Jose, G. Jai and Mastan, Mohammed and Al-Sharafi, Mohammed Ali (2019) Cloud computing services and its Effect on tertiary education : Using google classroom. In: 2019 7th International Conference on ICT and Accessibility, ICTA 2019; 7th International Conference on ICT and Accessibility, ICTA 2019 , 13-15 December 2019 , Hammamet. pp. 1-3. (9144797). ISBN 978-172816183-9 (Published)

Alenezi, R. A. and Norkhizan, A. M. and Rani, H. A. and Maulana, M. I. and Yasar, M. (2019) An experimental investigation of a diesel engine using carbon nanotubes blended with biodiesel. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012048). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Ali, Muna Jalal and Makky, Essam A. and Zareen, Seema and M. M., Yusoff (2019) Identification of bioactive phytochemicals using GC-Mass and TLC to the estimation of antimicrobial susceptibility of plant extracts. In: Journal of Physics: Conference Series, 2nd International Science Conference , 24-25 April 2019 , University of Al-Qadisiyah Diwaniyah, Iraq. pp. 1-11., 1294 (062013). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Alia Aqilah, Ghazali and Sunarti, Abd Rahman and Rozaimi, Abu Samah (2019) Preparation and Characterisation of Pineapple Peel Waste as Nanoadsorbent Incorporated into Pebax 1657 Nanocomposite Membrane for CO2/CH4 Separation. In: 11th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2019) , 19-20 November 2019 , Kuantan, Pahang. pp. 1-12.. (Unpublished) (Unpublished)

Alsajri, Mohammad and Mohd Arfian, Ismail and Abdul-Baqi, Saba (2019) A Review on the Recent Application of Jaya Optimization Algorithm. In: IEEE 1st Annual International Conference on Information and Sciences (AiCIS 2018) , 20-21 November 2018 , Fallujah, Iraq. pp. 129-132.. ISBN 978-1-5386-9188-5 (Published)

Alsewari, Abdulrahman A. and Kamal Z., Zamli and Lin, Mee Xuan (2019) Firefly combinatorial testing strategy. In: Intelligent Computing: Proceedings of the 2018 Computing Conference, Volume 1 , 10-12 July 2018 , London, United Kingdom. pp. 936-944., 858. ISBN 978-3-030-01173-4 (Published)

Anis Farhanah, Mohd Fadzir and Siti Ilyani, Rani and Gimbun, Jolius (2019) Experimental measurement for non-spherical bulk materials flow behaviour in rectangular enclosure. In: IOP Conference Series: Materials Science and Engineering; Electronic Packaging Interconnect Technology Symposium 2019, EPITS 2019 , 24 - 25 November 2019 , Penang. pp. 1-9., 701 (012061). ISSN 1757-8981 (Published)

Asiah, Kassim and Hafizoah, Kassim and Nursyafawati, Sabuan (2019) An online platform for reading comprehension achievements data: A cefr-aligned system. In: International Language and Education Conference (iLEC 2019) , 9-10 October 2019 , Sepang, Malaysia. pp. 1-14.. (Unpublished) (Unpublished)

Asmawati, Sajari and Hasnah, Haron and Ishak, Ismail and Chambers, Andrew (2019) Quality of chief integrity officer, ethical climate and the level of ethics and integrity in the Malaysian public sector. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 423-458., 2019. ISSN 2518-668X (Published)

Athirah, B. and Nurul Shahida, M. S. (2019) Occupational noise exposure among airport workers in Malaysia: an ergonomic investigation. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Azhari, Hamid Nour and Sundarajan, Siva (2019) Characterization of bioactive compounds extracted from patchouli : Comparing microwave-assisted hydrodistillation and hydrodistillation methods. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-11., 702 (012042). ISSN 1757-8981 (Published)

Azian, Ibrahim and Noorfadhleen, Mahmud and Nadrawina, Isnin and Dina Hazelbella, Dillah and Dayang Nurfauziah, Fauz Dillah (2019) Cyber warfare impact to national security - Malaysia experiences. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 206-224., 2019. ISSN 2518-668X (Published)

Azizul Qayyum, Basri and N. M. Zuki, N. M. and K. A. S. H. M., Yasir and H. M., Fazi and Ahmad Fauzi, Fudzin (2019) The validation of productivity on the changeover activity at the automotive stamping press line by comparing the embedded SMED frame-work versus SMED approach: A witness simulation case study. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012005). ISSN 1757-899X (Published)

Balya, Darohini and M. F., Abas and Pebrianti, Dwi and Hamzah, Ahmad and M. H., Ariff and M. R., Arshad (2019) Optimization of quaternion based on hybrid PID and Pw control. In: The 5th International Conference on Electrical, Control and Computer Engineering (INECCE2019) , 29-30 July 2019 , Swiss Garden Beach Resort Kuantan. pp. 1-6.. (Unpublished) (Unpublished)

Bari, Bifta Sama and Sabira, Khatun and Kamarul Hawari, Ghazali and Fa-kir, Md. Moslemuddin and Wan Nur Azhani, W. Samsudin and Mohd Falfazli, Mat Jusof and Rashid, Mamunur and Islam, Minarul and M. Z., Ibrahim (2019) Ultra wide Band (UWB) Based Early Breast Cancer Detection using Artificial Intelligence. In: 5th International Conference On Electrical, Control And Computer Engineering (INECCE2019) , 29-30 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-11.. (Unpublished) (Unpublished)

Bari, Bifta Sama and Sabira, Khatun and Kamarul Hawari, Ghazali and Fakir, Md. Moslemuddin and Mohd Hisyam, Mohd Ariff and Mohd Faizal, Jamlos and Rashid, Mamunur and Islam, Minarul and M. Z., Ibrahim and Mohd Falfazli, Mat Jusof (2019) Bandwidth and Gain Enhancement of a Modified Ultra-wideband (UWB) Micro-strip Patch Antenna using a Reflecting Layer. In: 5th International Conference On Electrical, Control And Computer Engineering (INECCE2019) , 29-30 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-10.. (Published)

Basma Y., Alashwal and Arun, Gupta and Mohamed Saad, Bala Husain (2019) Characterization of dehydrated keratin protein extracted from chicken feather using NaOH. In: The 1st Process Systems Engineering & Safety (ProSES) Symposium (ProSES 2019) , 4th September 2019 , Kuantan. pp. 1-8., 702 (012033). ISSN 1757-8981(Print); 1757-899X (Online) (Published)

Beg, M. D. H. and Islam, M. R. and Ahmed, Badlishah and R. M., Yunus and Abdullah, Abu Hannifa (2019) Optimization of reaction parameters of esterification on the synthesis of palm oil-based alkyds using response surface methods. In: IOP Conference Series: Materials Science and Engineering, 6th Global Conference on Polymer and Composite Materials (PCM 2019) , 8-11 July 2019 , Bangkok, Thailand. pp. 1-8., 634 (012038). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Benjunior, B. and Asnul Hadi, Ahmad and M. M., Rashidi (2019) Direct thermal method pouring temperature and holding time effect on aluminium alloy 6061 microstructure. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-4.. (Unpublished) (Unpublished)

Brapakaran, Paranitharan and Abdullah, N. A. Z. and M. Fouzi, S. M. and Sani, M. S.M. (2019) Correlation of numerical and experimental analysis for dynamic behaviour of a 3 blade propeller structure. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Selangor. pp. 1-10., 1262 (012019). ISSN 1742-6588 (Published)

Chan, W. S. and Rozaimi, Abu Samah and Norazwina, Zainol and Abdul Sahli, Fakharudin and Suraini, Abd-Aziz and Phang, Lai Yee (2019) Modeling of vanillin adsorption from aqueous solution using resin H103 by artificial neural network. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-13., 702 (012048). ISSN 1757-8981 (Published)

Cheng, Jack Kie and Hassan, Ahmed Khalif and Norhana, Mohd Aripin and Rafiuddin, Mohd Yunus (2019) An analytic hierarchy process approach in decision-making for material selection in an automotive company: a case study. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 472-484., 2019. ISSN 2518-668X (Published)

Chew, Wi Kang and Muhammad Aizzat, Zakaria (2019) Rover car outdoor localisation for navigation tracking using differential global positioning system estimation. In: Intelligent Manufacturing and Mechatronics: Proceedings of the 2nd Symposium on Intelligent Manufacturing and Mechatronics – SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 535-556.. ISBN 978-981-13-9539-0 (Published)

Chong, Chern How and Ahmad Shahrizan, Abdul Ghani (2019) Dual image fusion technique for underwater image contrast enhancement. In: The 11th National Technical Seminar on Unmanned System Technology (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang (UMP), Gambang Campus, Kuantan, Malaysia. pp. 1-6.. (Unpublished) (Unpublished)

Chuan, Zun Liang and Muhamad Husnain, Mohd Noh and Mohd Akramin, Mohd Romlay and Mu, Wen Chuan (2019) The productiveness of Bootstrap simulator in evaluating the accuracy parameters of measurement system for ball screw. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019) , 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-11., 1366 (012129). ISSN 1742-6596 (Published)

Danial, Mohamed and Mohd Yuhyi, Mohd Tadza and Rahisham, Abd Rahman and Mohd Ashraf, Mohamed Ismail (2019) On the effect of bio-corrosion of copper electrode in Andrassy bentonite as grounding material. In: The 11th National Technical Seminar on Unmanned System Technology (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang (UMP), Gambang Campus, Kuantan, Malaysia. pp. 1-2.. (Unpublished) (Unpublished)

E., Amri and Nurul Sa'aadah, Sulaiman and Qaid Alaw, Fares Ahmed (2019) Risk analysis of offshore pipeline due to third party damages. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (012053). ISSN 1757-8981 (Published)

E. F., Junis and J. J., Jui and Mohd Helmi, Suid and Mohd Ashraf, Ahmad (2019) Identification of continuous-time hammerstein system using sine cosine algorithm. In: International Conference on Smart Instrumentation, Measurement and Application 2019 , 27-29 August 2019 , Kuala Lumpur, Malaysia. pp. 1-6.. ISSN 2640-6535 ISBN 978-1-7281-3952-4 (Published)

Elhag, Husam Eldin Elhag Abugabr and Nailaa, Aishath and Azilah, Ajit and W. F. W., Ishak and A. Z., Sulaiman and Badhrulhisham, Abdul Aziz and Prasad, D. M. Reddy (2019) Optimization of protein yields in water extracts of Jackiopsis ornata roots by response surface methodology using microwave assisted extraction (MAE). In: AIP Conference Proceedings: Materials Characterization Using X-Rays and Related Techniques , 18-19 August 2018 , Kota Bharu, Kelantan, Malaysia. pp. 1-10., 2068 (020055). ISBN 978-0-7354-1796-0 (Published)

Elias, Bashar Qas and Alsajri, Mohammad and Ping, Jack Soh and Al-hadi, Azremi Abdullah (2019) Design of Flexible Planar Antennas Using Substrate Gap Structure for Surface Wave Reduction. In: IEEE 22nd International Conference on Control Systems and Computer Science (CSCS 2019) , 28-30 May 2019 , Bucharest, Romania. pp. 453-458.. ISSN 2379-0482 (Published)

Elizabeth, Marta and Yuhani, Yusof and Mohd Sham, Mohamad and Muhamad Faiz, Abu Bakar and Mohd Adhha, Ibrahim (2019) Efficacy of cupping in the treatment of hypertension disease using graph colouring. In: Journal of Physics: Conference Series, 2nd International Conference on Applied and Industrial Mathematics and Statistics (ICoAIMS 2019) , 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-9., 1366 (012044). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Emyra Ezzaty, Masiren and Noorlisa, Harun and Haslenda, Hashim (2019) Molecular interaction establishment of amine-absorption process for CO2 removal. In: 1st Euro-Asia Conference on Co2 Capture and Utilisation (EACCO2CU 2019) , 5-8 August 2019 , Sunway University, Selangor, Malaysia. pp. 1-28.. (Unpublished) (Unpublished)

Erdiwansyah and Leman, A. M. and Muhamad Norkhizan, Abdullah and Mulyadi, L. and Fitri, Khoerunnisa and Sardjono, R. E. and Maulana, M. I. and M. S. M., Sani (2019) Performance of a small diesel engine by experimental and numerical simulation analysis. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-12., 506 (012029). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Erdiwansyah, . and Leman, A.M. and Khoerunnisa, F. and Sardjono, R. E. and Munawir, . and Maulana, M. I. and M. S. M., Sani (2019) Engine modelling of a single cylinder diesel engine fuelled by diesel-methanol blend. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-14., 506 (012014). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Erdiwansyah, . and M. S. M., Sani and R., Mamat and J. M., Zikri and N. F. D., Razak and Munawir, . (2019) Experimental investigation of vibrations and noise characterization for spark ignition engine. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012014). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Fadhlyya Arawaney, Abdul Ghani and Mohd Shahridwan, Ramli and Nor Aida Zuraimi, Md Noar and Abdul Rahman, Mohd Kasim (2019) Mathematical modelling of wave overtopping at vertical structures. In: Journal of Physics: Conference Series, 2nd International Conference on Applied and Industrial Mathematics and Statistics (ICoAIMS 2019) , 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-7., 1366 (012046). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Fadwa Sameeha, Ismail and Kamal, Yusoh and Anis Sakinah, Zainal Abidin and Abu Hannifa, Abdullah and Zulhelmi, Ismail (2019) Three different types of tea as surfactant in liquid exfoliation of graphite : Green tea, black tea and oolong tea. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (1). ISSN 1757-8981 (Published)

Farag, Mohannad and Abdul Nasir, Abd Ghafar and Alsibai, Mohammed Hayyan (2019) Grasping and Positioning Tasks for Selective Compliant Articulated Robotic Arm using Object Detection and Localization: Preliminary Results. In: IEEE 6th International Conference on Electrical and Electronics Engineering (ICEEE 2019) , 16-17 April 2019 , Istanbul, Turkey. pp. 284-288.. ISBN 978-1-7281-3910-4 (Published)

Farag, Mohannad and Abdul Nasir, Abd Ghafar and Alsibai, Mohammed Hayyan (2019) Real-time robotic grasping and localization using deep learning-based object detection technique. In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS) , 29 June 2019 , Shah Alam, Selangor, Malaysia. pp. 139-144.. ISBN 978-1-7281-0784-4 (Published)

Farag, Mohannad and Alsibai, Mohammed Hayyan and Norsinnira, Zainul Azlan and Abdul Nasir, Abd Ghafar (2019) Slippage Detection for Grasping Force Control of Robotic Hand Using Force Sensing Resistors. In: ICCTA 2019 Proceedings of the 2019 5th International Conference on Computer and Technology Applications , 16-17 April 2019 , Istanbul, Turkey. pp. 1-5.. ISBN 978-1-4503-7181-0 (Published)

Farah Amalina, Ishak and Muhammad Haziq, Jamil and Abdul Syukor, Abd Razak and Ahmad Ridwan, Ahmad Faisal and Ab Hamid, Mohd Rashid (2019) Study of Palm Acid Oil (PAO) from Sludge Palm Oil Mill Effluent (POME) as Goat’s Feed. In: 11th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2019) , 19-20 November 2019 , Kuantan, Pahang. pp. 1-8.. (Unpublished) (Unpublished)

Farghaly, Alaa Taiseer and Mazlina, Abdul Majid (2019) A study on Green IT awareness among University Malaysia Pahang students. In: The International Conference on E-Learning (ICOEL2019) , 21-22 August 2019 , Universiti Malaysia Sarawak (UNIMAS), Sarawak, Malaysia. pp. 1-9.. (Published)

Fatimah, Mahmud and Nik Anis, Nik Azemi (2019) Factors influencing employee perception on performance management system. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 537-550., 2019. ISSN 2518-668X (Published)

Fatin Farisha Alia, Azmi and Mohd Fakhrul Zamani, Abdul Kadir and Aziz, Shujahadeen B. and Saifful Kamaluddin, Muzakir (2019) Characterization of opto-electronic properties of thermally evaporated ZnO. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018, AMC 2018 , 27-28 November 2018 , Kuching, Sarawak. pp. 179-184., 29. ISSN 2214-7853 (Published)

Fatin Hakimah, Sharifuddin and Kassa, Freselam Mulubrhan and Gebremariam, M. A. and Azmir, Azhari and Alemu, Tamiru (2019) Process simulation modelling and improvement on energy consumptions efficiency. In: 2019 IEEE 7th Conference on Systems, Process and Control (ICSPC) , 13 - 14 December 2019 , Melaka. pp. 76-79. (9067991). ISBN 978-172811826-0 (Published)

Fatin Zafirah, Mansur and C. K. M., Faizal and Atnaw, Samson M. and Shaharin Anwar, Sulaiman (2019) Performance modelling and validation on the co-gasification of coal and sawdust pellet in research-scale downdraft reactor. In: Sustainable Energy Towards the New Revolution: Proceedings of the 18th International Conference on Sustainable Energy Technologies , 20-22 August 2019 , Kuala Lumpur, Malaysia. pp. 87-98., 3. ISBN 9780853583318 (Published)

Fatin Zafirah, Mansur and Che Ku Mohammad Faizal, Che Ku Yahya and Noor Asma Fazli, Abdul Samad and Atnaw, Samson Mekbib and Shaharin Anwar, Sulaiman (2019) Performance modelling and validation on co-gasification of coal and sawdust pellet in research-scale downdraft reactor. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-15., 702 (012023). ISSN 1757-8981 (Published)

Fazeeda, Mohamad and Siti Filza, Saharin (2019) Application of discrete event simulation (DES) for queuing system improvement at hypermarket. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 330-346.. ISSN 2518-668X (Published)

Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. (2019) Participatory Ergonomics Intervention for Exploring Risk Factors Lead to Work-Related Musculoskeletal Disorders Among Automotive Production Workers. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 278-283.. ISBN 978-981-15-0950-6 (Published)

Fernando, Yudi and Fasihah, Elias and Muhammad Shabir, Shaharudin and Rajan, Jose (2019) Transforming Food Waste into Value Added Products: A Circular Economy Analysis of Malaysian. In: Proceeding of Nano-Micromaterials for Circular economy and Sustainability in the East Asia Pacific , 29 August - 1 September 2019 , National University of Singapore, Singapore. pp. 1-13.. (Published)

Fernando, Yudi and Gui, Anderes and Ika Sari, Wahyuni-TD and Seo, Yong Won and Hasnah, Haron (2019) Supplier sustainable integrity using a split-half method: Empirical evidence from Malaysia. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 579-592.. ISSN 2518-668X (Published)

Filzah Lina, Mohd Safeiee and Abu, Mohd Yazid and Nik Nurharyantie, Nik Mohd Kamil and Nurul Farahin, Zamrud (2019) Development of a new costing structure in production environment using activity based costing. In: The 4th International Conference on Engineering Technology 2019 (ICET 2019) , 6-7 July 2019 , TATI University of College, Terengganu. pp. 1-6.. (In Press / Online First) (In Press / Online First)

H., Badli and Md Noor, Ariffin and Siti Zubaidah, Sulaiman and Susaidevas, Jlyas and Nur Atikah, Mahamad and Nazrah Asyhiqin, Mahamad Khariol Nizar (2019) Assessment on the severity of low density polyethylene (LDPE)/Ethylene hybrid explosion. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (012050). ISSN 1757-8981 (Published)

Hamada, Hussein M. and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Humada, Ali Mahmood (2019) Comparison study between POFA and POCP in terms of chemical composition and physical properties - review paper. In: International Conference on Agricultural Technology, Engineering and Environmental Sciences, ICATES 2019 , 21-22 August 2019 , Banda Aceh, Indonesia. pp. 1-8., 365 (1). ISSN 1755-1307 (Published)

Hamidah, Abdullah and Khan, Md. Maksudur Rahman and Zahira, Yaakob and Nur Aminatulmimi, Ismail (2019) A kinetic model for the photocatalytic reduction of CO2 to methanol pathways. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012026). ISSN 1757-8981 (Published)

Hamizatun, Mohd Fazi and N. M. Zuki, N. M. and Azizul Qayyum, Basri (2019) Risks assessment at automotive manufacturing company and ergonomic working condition. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012106). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Hammood, Rasheed Abed and Sharifah Maszura, Syed Mohsin (2019) Effect use of steel fiber on mechanical properties of concrete mixture. In: IOP Conference Series: Earth and Environmental Science, International Conference on Agricultural Technology, Engineering and Environmental Sciences , 21-22 August 2019 , Banda Aceh, Indonesia. pp. 1-9., 365 (012061). ISSN 1755-1307 (Published)

Hamza, Nidal Abdelgadir Ahmed and Mazlina, Abdul Majid and Al-Bashiri, Hael (2019) Reducing the throughput time for patient flow in emergency department: simulation and modelling overview. In: IOP Conference Series: Materials Science and Engineering, The 6th International Conference on Software Engineering & Computer Systems , 25-27 September 2019 , Pahang, Malaysia. pp. 1-8., 769 (012013). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Hamzah, Ahmad and Nurul Syafiqah, Mohd and Nur Aqilah, Othman and Mohd Mawardi, Saari (2019) Design and development of wearable human activity recognition for heatlhcare monitoring. In: 3rd National Conference on Wind and Earthquake Engineering & International Seminar on Sustainable Construction Engineering , 12-13 July 2019 , Impiana KLCC Hotel, Kuala Lumpur. pp. 1-11.. (Unpublished) (Unpublished)

Hasmawani, Hashim and Muhammad Khairul Anuar, Mohamed and Nazila, Ishak and Norhafizah, Md Sarif and Mohd Zuki, Salleh (2019) Thermal radiation effect on MHD stagnation point flow of Williamson fluid over a stretching surface. In: Journal of Physics: Conference Series, 2nd International Conference on Applied and Industrial Mathematics and Statistics (ICoAIMS 2019) , 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-13., 1366 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Hasnah, Haron and Nur Nadiah Salihah, Mat Razali and Fazeeda, Mohamad (2019) Factors influencing financial planning retirement amongst employees in the private sector in East Coast Malaysia: literature review and research agenda. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1115-1129., 2019. ISSN 2518-668X (Published)

Hazirah A., Razak and Nornasuha, Abdullah and Setiabudi, H. D. and Chin, S. Y. and Nurul Aini, Razali (2019) Influenced of Ni loading on SBA-15 synthesized from oil Palm ash silica for syngas production. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-10., 702 (012024). ISSN 1757-899X (Published)

Hazman, Abu Hassan and R., Mamat and Hagos, F. Y. and Gholamhassan, Najafi (2019) Experiment of oxygenated fuel on diesel engine: Properties, performance and emission. In: International Symposium on Science, Technology and Engineering (ISSTE 2019) , 18-20 October 2019 , Melaka, Malaysia. pp. 1-14.. (Unpublished) (Unpublished)

Hazrulzurina, Suhaimi and Abdullah, Adam and Mrwan, Anes G. and Zuhaira, Abdullah and Mohd. Fahmi, Othman and Mohd. Kamal, Kamarulzaman and Hagos, F. Y. (2019) A comparative analysis on emissions of some next generation long-chain alcohol/diesel blends in a direct-injection diesel engine. In: AIP Conference Proceedings: 3rd International Conference On Automotive Innovation Green Energy Vehicle (AIGEV2018) , 25-26 July 2018 , Kuantan, Malaysia. pp. 1-13., 2059 (020053). ISBN 978-0-7354-1787-8 (Published)

Heng, Sheng Guang and Rosdiyana, Samad and Mahfuzah, Mustafa and Nor Rul Hasma, Abdullah and Pebrianti, Dwi (2019) Analysis of performance between kinect v1 and kinect v2 for various facial part movements. In: 9th IEEE International Conference on System Engineering and Technology, ICSET 2019 , 7 October 2019 , Shah Alam, Malaysia. pp. 17-22. (8906419). ISSN 2470-640X ISBN 9781728107585 (Published)

Heng, Sheng Guang and Rosdiyana, Samad and Mahfuzah, Mustafa and Nor Rul Hasma, Abdullah and Pebrianti, Dwi (2019) Analysis of performance between kinetic v1 and Kinect v2 for various facial part movements. In: 2019 IEEE 9th International Conference on System Engineering and Technology, ICSET 2019 - Proceeding , 7 October 2019 , Shah Alam. pp. 17-22. (8906419). ISBN 978-172810758-5 (Published)

Hong, Pui Khoon and Sharmila, Sevan and Nur Liyana, Mohd Izan (2019) functional edible coatings for dried guava (psidium guajava L.) slices. In: 2nd International Conference on Recent Advancements in Science and Technology (ICORAST 2019) , 27-30 October 2019 , Putrajaya, Malaysia. pp. 1-9.. (Unpublished) (Unpublished)

Hossain, Md Shamim and Jalab, Hamid A. and Kahtan, Hasan and Azma, Abdullah (2019) Image resolution enhancement using improved edge directed interpolation algorithm. In: Proceedings - 9th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2019 , 29 November-1 December 2019 , Penang. pp. 55-60. (9068535). ISSN 978-172813500-7 (Published)

Imran Edzereiq, Kamarudin and M. A., Ameedeen and Z. R. M., Azmi and M. I. U., Ong and Abbas Saliimi, Lokman (2019) Performance analysis on round trip available bandwidth estimation tools for wireless mesh network. In: 6th International Conference on Software Engineering & Computer Systems (ICSECS 2019) , 25-27 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Published)

Intan Suhana, Mohd Razelan and Azlina, Ismail and Azman, N. F. T. (2019) Impact of minerals freight and logistic operations towards Kuantan traffic flow. In: 3rd National Conference on Wind and Earthquake Engineering & International Seminar on Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8.. (Unpublished) (Unpublished)

Islam, A. S. M. Touhidul and Shariman, Mustafa and Sorooshian, Shahryar (2019) An error-proof approach for decision making using DEMATEL. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 244-258.. ISSN 2518-668X (Published)

J. M., Zikri and M. S. M., Sani and Erdiwansyah, . and Ahmad Fitri, Yusop and I., Izzudin and Syazwana, Sapee (2019) Vibration analysis on palm oil methyl ester biodiesel as a fuel with the additional of butanol. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 2-11., 1262 (012012). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Jing Thin, Heng and Abdulbari, Hayder A. and Abdullah Mohammed Basher, Esmail (2019) Assessment of capacitive deionization microfluidic desalination via electrode microstructure analysis. In: Materials Today: Proceedings ; 2018 International Conference on Chemical Sciences and Engineering: Advance and New Materials, ICCSE 2018 , 7-8 November 2018 , Melaka. pp. 1354-1362., 19. ISSN 2214-7853 (Published)

Juwairiah, Osman and Mardhiyyah, Zamani and Rosjuliana Hidayu, Rosli and Mohamad Baihaqi, Hasni and Nur Afza Syarfa, Rosli and Mohd Iszuani, Mohd Hassan and Syahrina, Ahmad (2019) The value of trust in the drama Tersasar di Jalan-Mu. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 132-166., 2019. ISSN 2518-668X (Published)

K. R., Raj and Sunarti, Abd Rahman (2019) Preliminary screening study using ffd on incorporation of graphene oxide in pvc in mixed matrix membrane to enhance CO2/CH4 separation. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-15., 702 (012041). ISSN 1757-899X (Published)

Kamarulzaman, Mahmad Khairai and Muhammad Nubli, Abdul Wahab and Ezrin Hani, Sukadarin (2019) Ergonomics study in the stress level among Electronics Assembly Line Workers. In: 4th International Conference on Ergonomics & 2nd International Conference on Industrial Engineering (ICE & ICIE 2019) , 27-28 August 2019 , Terengganu, Malaysia. pp. 1-11.. (Unpublished) (Unpublished)

Kavin, J. and Mohd Rashidi, Maarof and Ahmad, A. H. (2019) Investigation of nickel aluminium bronze castings properties by degassing agent technique. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-12., 469 (012037). ISSN 1757-899X (Published)

Kee, Heng Yik and Nur Syafiqah, Fauzan and Widia, Mirta (2019) Psychological impact of noise exposure among machine and non-machine operators in construction industry. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012055). ISSN 1757-8981 (Published)

Khairil Azman, Masri and Ahmad Kamil, Arshad and Putra Jaya, Ramadhansyah and Haryati, Awang and Mohamad Idris, Ali and Ekarizan, Shaffie and Juraidah, A. and Youventharan, Duraisamy (2019) Performance of nanosilica as modified binder to improve rutting and fatigue resistance. In: 4th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2019) , 30-31 October 2019 , Putrajaya International Convention Centre (PICC) Putrajaya, Malaysia. pp. 1-4.. (Unpublished) (Unpublished)

Khairul Aiman, Zainal Abidin and Muhammad Fakhrul, Yusuf (2019) Factors that influence abandoned housing project: An IPMA analysis on the Malaysian construction industry. In: Proceedings of Abstracts of the 3rd International Conference on the Future of Asean (ICoFA) 2019 , 4-6 June 2019 , Perlis, Malaysia. pp. 1-4.. ISBN 97896715843 (Published)

Khairull Nasruddin, Mansor and Mohd Shakirun Amin, Abdul Halim and Nazruddin, Mat Ali and W. Z. W. A., Rahman and Syamsul Bahari, Abdullah (2019) Integrating ILS in dissolving palm fruit cellulose. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (1). ISSN 1757-8981 (Published)

Khalimi Johan, Abd Hamid and S., Saad and Hazlan, Abdul Hamid and Nor Maslina, Mohsan and Doh, Shu Ing and Nor Ashikin, Muhamad Khairussaleh and Zahrizan, Zakaria and J., Mucklow (2019) Behaviour of perforated built-up cold-formed steel sections with edge and web stiffeners. In: Sustainable & Integrated Engineering International Conference (SIE2019) , 8-9 December 2019 , Putrajaya, Malaysia. p. 1.. (Unpublished) (Unpublished)

Latifah Naina, Mohamed and Fernando, Yudi (2019) Research note on eco-efficient supply chain integration. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 736-745.. ISSN 2518-668X (Published)

Lau Sze Yii, Betty and Wan Ismail, Wan Muhammad Syafiq and Fatin Nasuha, Yahya and Ruwaida, Abdul Rasid (2019) The effect of operating temperature and equivalence ratio in an entrained flow gasification of EFB. In: Materials Today: Proceedings; 2018 International Conference on Chemical Sciences and Engineering: Advance and New Materials, ICCSE 2018 , 7-8 November 2018 , Melaka. pp. 1373-1381., 19. ISSN 2214-7853 (Published)

Lebcir, Mohamed and Suryanti, Awang (2019) A review on type of attacks on fingerprint image and watermarking techniques. In: IOP Conference Series: Materials Science and Engineering, Joint Conference on Green Engineering Technology & Applied Computing 2019 , 4-5 February 2019 , Bangkok, Thailand. pp. 1-6., 551 (012071). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Lee, Chia Kuang and Yiu, Tak Wing and Lim, Wei Xin and Adeleke, A. Q. and Toh, Tien Choon (2019) Status and barriers impeding utilization of project management tools: epidemic for tripartite construction parties in Malaysia. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 289-312., 2019. ISSN 2518-668X (Published)

Lee, Khai Loon and Lim, Cean Peing (2019) Big data and predictive analytics capabilities : a review of literature on its impact on firm’s financial performance. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1057-1073., 2019. ISSN 2518-668X (Published)

Lim, Qian Pink and Mohd Ridzuan, Darun and Nawanir, Gusman (2019) Decrypting the real life escape room experience. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 385-407., 2019. ISSN 2518-668X (Published)

Lim, Sheh Hong and Matalif, Muhammad Uzair and Nurul Najihah, Mohd Nazri and Mohd Azrul Hisham, Mohd Adib (2019) Effects of blood flow pattern and cross-sectional area on hemodynamic of patient-specific cerebral aneurysm via fluid-structure interaction method: A review. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished) (Unpublished)

Liyana Nadirah, M. S. and Deraman, M. R. and Wan Ibrahim, W. H. and Harun, N. (2019) Diffusion coefficients of trivalent rare earth/actinide ions in acid and alkaline aqueous solutions. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang. pp. 1-10., 702 (012045). ISSN 1757-8981 (Published)

M., Norhafana and M. M., Noor and Hagos, F. Y. and A. Aziz, Hairuddin and K., Kadirgama and D., Ramasamy and M. M., Rahman and G., Najafi (2019) Study of fuel properties test: Diesel and various blending nanoparticles based diesel. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished) (Unpublished)

M., Waris and Zarith Sufia, Azlan and Puteri Fadzline, Muhamad Tamyez and Ullah, Mehfooz and Khan, Asadullah (2019) Analyzing the constructs of stakeholder engagement towards renewable energy projects success in Malaysia: a PLS approach. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 818-843., 2019. ISSN 2518-668X (Published)

M. A., Faten Albtoush and S. I., Doh (2019) Factors effecting the cost management in construction projects. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 173-178.. (Published)

M. F., Zolkepli and Mohd Fakhrurrazi, Ishak and M. S. I., Zaini (2019) Slope stability analysis using modified Fellenius's and Bishop's method. In: IOP Conference Series: Materials Science and Engineering, 11th International Conference on Geotechnical Engineering in Tropical Regions (GEOTROPIKA) and 1st International Conference on Highway and Transportation Engineering (ICHITRA) 2019 , 27-28 February 2019 , Kuala Lumpur, Malaysia. pp. 1-13., 527 (012004). ISSN 1757-899X (Published)

M. F. R. M., Mawardzi and A., Japper-Jaafar and M. S., Najib and S. M., Daud and T. M. Y. S., Tuan Ya (2019) Intelligent classification of waxy crude oil odor-profile at different temperature. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012071). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

M. H. N., Izham and M. S. M., Sani (2019) Model updating of frame structure with bolted joints. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-9., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

M. I., Adiyanto and Nur Hazwani, Mohd Rashid and Syed Abdul Haris, Syed Mustapa and Noram Irwan, Ramli (2019) Comparison on total weight of steel reinforcement for 5 story reinforced concrete building with and without seismic design. In: Proceedings of AICCE'19: AWAM International Conference on Civil Engineering , 21-22 August 2019 , Penang, Malaysia. pp. 685-694., 53. ISBN 978-3-030-32816-0 (Published)

M. I. F., Mohd Haniff and Mohd Ashraf, Ahmad and Mohd Helmi, Suid and Mohd Falfazli, Mat Jusof and Ahmad Nor Kasruddin, Nasir and Mohd Zaidi, Mohd Tumari (2019) Using piecewise affine PID control scheme for double pendulum overhead crane. In: 19th International Conference on Control, Automation and Systems (ICCAS 2019)) , 15-19 October 2019 , Jeju, Korea (South). pp. 1-6. (19301916). ISBN 978-89-93215-17-5 (Published)

M. N. A. M., Asri and N. A. Z., Abdullah and M. S. M., Fouzi and M. S. M., Sani (2019) Normal mode finite element analysis of aerofoil wing structure with different materials. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-9., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

M. S. I., Zaini and Mohd Fakhrurrazi, Ishak and Muhammad Farhan, Zolkepli (2019) Forensic assessment on landfills leachate through electrical resistivity imaging at Simpang Renggam in Johor, Malaysia. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Green Civil and Environmental Engineering , 4-6 September 2019 , Malang, East Java, Indonesia. pp. 1-11., 669 (012005). ISSN 1757-899X (Published)

M. S. M., Sani and M. A. F. A., Rahimi and Danial, Mohamed (2019) Sound intensity mapping of two stroke engine by using hemispherical surface coordinate arrangement. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012060). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

M. Z. A., Zamri and Noor Yahida, Yahya and Raihan Syahirah, Ramli and Norzita, Ngadi and Widia, Mirta (2019) Characterization of banana peels waste adsorbent for preliminary study of methylene blue removal from aqueous solution. In: IOP Conference Series: Materials Science and Engineering; 4th International Conference on Ergonomics and 2nd International Conference on Industrial Engineering, ICE and ICIE 2019 , 27 - 28 August 2019 , Kuala Terengganu, Terengganu. pp. 1-9., 697 (1). ISSN 1757-8981 (Published)

M. Z. M., Ismail and A. H., Zainal and Nazrul Idzham, Kasim and M. A. F. M., Mukhtar (2019) A mini review: Lean management tools in assembly line at automotive industry. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-12., 469 (012086). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Mahadi, Bahari and Syahida Nasuha, Bukhari and Jun, L.N. and Herma Dina, Setiabudi (2019) Development of fibrous mesoporous silica for catalytic reaction : A short review. In: Materials Today: Proceedings; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur. pp. 33-38., 42 (1). ISSN 2214-7853 (Published)

Mahmood, Mahmood H. and Osama, A K and Makky, Essam A. and Mohd Hasbi, Ab. Rahim and Nor Hafizah, Mat Ali and Nur Diana, Hazrudin (2019) Phytochemical screening, antimicrobial and antioxidant efficacy of some plants and their mixture extracts. In: The 2nd international conference on applied biochemistry and biotechnology (ABB 2019) , 21 - 24 Julai 2019 , Macau, China. pp. 1-17.. (Unpublished) (Unpublished)

Mahyuddin, Ismail and Mansor, Sulaiman and Nurkarimah, Yusof and Faizal, Abdul Khir and Zainal Abidin, Kusmin and Yuhaniz, Mohd Yusop (2019) The application of GSP 48 in dealing with divorce cases related to witchcraft. In: Symposium on Knowledge Transfer 2019 , 25 November 2019 , Universiti Sains Malaysia, Penang, Malaysia. pp. 1-4.. (Published)

Maity, Bipradeep and Raj Krishna Roshan, Kanasan and Sunarti, Abd Rahman (2019) CO2/CH4 separation using PVDF/PVC blended membrane. In: 11th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2019) , 19-20 November 2019 , Kuantan, Pahang. pp. 1-13.. (Unpublished) (Unpublished)

Maoqi, Li and M. I., Ishak and P. M., Heerwan (2019) The effect of parallel steering of a four-wheel drive and fourwheel steer electric vehicle during spinning condition: a numerical simulation. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012084). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Mas Ayu, Hassan and Mustaqieem, M. M. and A., Shah and Arafat, Andril and Dambatta, M. S. (2019) Effect PLA/HA coating on dental implant using finite element method. In: The 4th International Conference on Frontiers of Composite Materials , 13-16 November 2019 , The University of Queensland, Brisbane, Australia. pp. 1-9.. (Unpublished) (Unpublished)

Mat Aris, S. and Philip, Dick Carlos and Syed Mohsin, S. M. (2019) Preliminary study on properties of oil palm shell lightweight concrete with cockle shell as mixing ingredient. In: IOP Conference Series: Materials Science and Engineering; Postgraduate Symposium in Civil and Environmental Engineering 2019, PSCEE 2019 , 31 March 2019 , Batu Pahat, Johor. pp. 1-7., 601 (012016). ISSN 1757-8981 (Published)

Maziatun, Mohamad Mazlan and Nur Aqilah, Othman and Hamzah, Ahmad (2019) Diagonalization of covariance matrix in simultaneous localization and mapping of mobile robot. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018 , 27-28 September 2018 , Universiti Malaysia Pahang. pp. 285-297., 538. ISBN 978-981-13-3708-6 (Published)

Mazni, Ismail and Ruwaida, Abdul Rasid and R. N. U., Abdul Rahman and N. S., Ahmad and M. A. W., Mohd Radzuan (2019) Integrating microwave heating pre-treatment to improve torrefaction of food waste. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012009). ISSN 1757-899X (Published)

Mazni, Saad and Rosita, Husain and Anita, Abdul Rani and Airin, AbdulGhani (2019) Empowering employees with spiritual intelligence for higher quality food-hygiene practices and food service performance of on-premise caterers. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012066). ISSN 1757-8981 (Published)

Mohamad Hafidzul Rahman, Alias and Mohd Fadzil, Abdul Rahim and R. A., Bakar (2019) Single hole direct injector simulation validation and parametric sensitivity study. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30 - 31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 788 (0120635th). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Mohamed, Hybat Salih and Nour, A. H. and Zaki, Yasmeen Hafiz and Zulkifly, Jemaat and Azhari, H. Nour (2019) Treatment of Palm Oil Mill Effluent (POME) using Membrane Anaerobic System (MAS). In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-12., 702 (012029). ISSN 1757-899X (Published)

Mohammad Fazle, Rabbi and Nurul Wahidah, Arshad and Kamarul Hawari, Ghazali and Sikandar,, Tasriva and Rohana, Abdul Karim and M. Z., Ibrahim (2019) EMG activity of leg muscles with knee pain during islamic prayer (Salat). In: 15th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2019 , 8 - 9 March 2019 , Pulau Pinang. pp. 213-216.. ISBN 978-153867563-2 (Published)

Mohammed, Khudhair Abbas and Mazlina, Abdul Majid and Mohd Sharifuddin, Ahmad (2019) Conceptual design of a generic nodal abstraction (GNA) for a human-agent collaboration systems. In: IOP Conference Series: Materials Science and Engineering, Joint Conference on Green Engineering Technology & Applied Computing 2019 , 4-5 February 2019 , Bangkok, Thailand. pp. 1-5., 551 (012043). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Mohammed, Mostafa Abdulghfoor and Hasan, Raed Abdulkareem and Ahmed, Munef Abdullah and Tapus, Nicolae and Shnan, Marwan Ali and Khaleel, M. K. and Ali, Ahmed H. (2019) A Focal load balancer based algorithm for task assignment in cloud environment. In: IEEE 10th International Conference on Electronics, Computers and Artificial Intelligence (ECAI 2018) , 28-30 June 2018 , Iasi, Romania. pp. 1-6.. ISBN 978-1-5386-4901-5 (Published)

Mohammed Adam Ibrahim, Fakharaldien and Khalid, Adam and Noor Akma, Abu Bakar and Mazlina, Abdul Majid (2019) Weather data analysis using hadoop : Applications and challenges. In: IOP Conference Series: Materials Science and Engineering, Joint Conference on Green Engineering Technology & Applied Computing 2019 , 4-5 February 2019 , Bangkok, Thailand. pp. 1-6., 551 (012044). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Mohd Azrul Hisham, Mohd Adib and Muhammad Irfan, Abdul Jalal and Nur Hazreen, Mohd Hasni (2019) Improvement of the BT-heartomotive device for avert car accident using MY Brady Tachy Heart mobile application. In: 6th International Conference on Bioinformatics Research and Applications (ICBRA 2019) , 19-21 December 2019 , Seoul National University, Seoul, South Korea. pp. 1-5.. (Unpublished) (Unpublished)

Mohd Bijarimi, Mat Piah and Francisco, Vinoth and Mohammad Norazmi, Ahmad and Erna, Normaya and Sazmal Effendi, Arshad and Waleed Ali Murshed Hasan, Alhadadi (2019) Mechanical properties of poly(lactic acid) compounded with recycled tyre waste/graphene nanoplatelets nanocomposite. In: Materials Today: Proceedings; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur. pp. 265-269., 42 (1). ISSN 2214-7853 (Published)

Mohd Falfazli, Mat Jusof and Nurul Amira, Mhd Rizal and Ahmad Azwan, Abdul Razak and Shuhairie, Mohammad and Ahmad Nor Kasruddin, Nasir (2019) Exponentially adaptive sine-cosine algorithm for global optimization. In: 9th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2019 , 27-28 April 2019 , Kota Kinabalu. 6 -10. (8743786). ISBN 978-1-5386-8546-4 (Published)

Mohd Hafiz, Ali and Abdul Adam, Abdullah and Mohd Hafizil, Mat Yasin (2019) Effect of BHA and BHT antioxidant additives on engine performance and emission of a CI engine fueled with a palm oil methyl ester-diesel fuel blend. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10., 2059 (020051). ISBN 978-0-7354-1787-8 (Published)

Mohd Khaidi, Sarah and Abu, Noratikah and Muhammad, Noryanti (2019) Tourism demand forecasting – a review on the variables and models. In: Journal of Physics: Conference Series; 2nd International Conference on Applied and Industrial Mathematics and Statistics 2019, ICoAIMS 2019 , 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-8., 1366 (012111). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Mohd Mawardi, Saari and Ahmad Zahir, Irsyad Razak and Mohd Aufa Hadi, Putera Zaini and Nurul A’in, Nadzri and Mohd Razali, Daud and Hamzah, Ahmad (2019) Development of AC and DC Drive coils for magnetic particle imaging system. In: 5th International Conference on Electrical, Control and Computer Engineering (INECCE 2019) , 29-30 July 2019 , Swiss Garden Kuantan. pp. 1-11.. (Unpublished) (Unpublished)

Mohd Rizauddin, Deraman and Ruwaida, Abdul Rasid and Mohamad Rizza, Othman and Suli, L. N. M. (2019) Co-gasification of coal and empty fruit bunch in an entrained flow gasifier : A process simulation study. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-13., 702 (012005). ISSN 1757-8981 (Published)

Mohd Tamizi, Mazlan and Khairil Anuar, Ramly and Nur Emilia, Abdullah Harun (2019) Bauxite industries: lesson learn from governance perspective. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1214-1229., 2019. ISSN 2518-668X (Published)

Mohd Yazid, Abu and Filzah Lina, Mohd Safeiee and Nik Nurharyantie, Nik Mohd Kamil and Nurul Farahin, Zamrud (2019) Exploring beneficial of Mahalanobis Taguchi Method on production environment. In: The 4th International Conference on Engineering Technology 2019 (ICET 2019) , 6-7 July 2019 , TATI University of College, Terengganu. pp. 1-6.. (In Press / Online First) (In Press / Online First)

Mohd Yazid, Abu and Nik Nurharyantie, Nik Mohd Kamil and Nurul Farahin, Zamrud and Filzah Lina, Mohd Safeiee and Muchamad, Oktaviandri (2019) A review on the integration of mahalanobis-taguchi system and time-driven activity-based costing on production environment. In: 4th International Conference on Engineering Technology (ICET 2019) , 6-7 July 2019 , DITC, Kemaman, Terengganu. pp. 1-6.. (In Press / Online First) (In Press / Online First)

Mohd Zulkifli, Mohamad Noor and Mohamad Anas, Mohd Azmi and Mohd Shaiful Zaidi, Mat Desa and Mohd Bijarimi, Mat Piah and Azizan, Ramli (2019) The thermal properties of polyurethane/neoprene blends on prosthetic foot. In: The 4th International Conference on Materials Technology and Applications (ICMTA 2019) , 9-16 October 2019 , TKP GardenCity Kyoto, Japan. pp. 1-8.. (Unpublished) (Unpublished)

Mohd. Herzwan, Hamzah and Azri, Alias and R., Mamat and Abdul Adam, Abdullah and Sudrajad, Agung and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2019) Performance analysis of diesel engine running with tyre-derived fuel. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012107). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Muhamad Izdhar, Zaki and Saptaji, Kushendarsyah and Ramdan, R. D. and Kurniawan, Tedi (2019) Fabrication of micro dimples pattern using ball end mill. In: IOP Conference Series: Materials Science and Engineering, International Conference on Design and Application of Engineering Materials (IC-DAEM) in conjunction with Seminar Nasional Metalurgi dan Material XI (SENAMM) , 6-7 September 2018 , Bandung, Indonesia. pp. 1-8., 547 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Muhammad, Aisha and Shanono, Ibrahim Haruna (2019) Simulation of a Car crash using ANSYS. In: 2019 15th International Conference on Electronics, Computer and Computation, ICECCO 2019; 15th International Conference on Electronics, Computer and Computation, ICECCO 2019 , 10-12 December 2019 , Abuja. pp. 1-5. (9043275). ISSN 978-172815160-1 (Published)

Muhammad Firdaus, Masrom and Normaniha, Abd Ghani and Nur Fadzlina, Jamin and Nur Atiqah Adlina, Razali (2019) Motion control of triple links inverted pendulum on two-wheeled system using interval type-2 fuzzy logic control base on particle swarm optimization. In: IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2019) , 29 November - 1 December 2019 , Batu Feringghi, Penang, Malaysia. pp. 1-6.. (Unpublished) (Unpublished)

Muhammad Haziq, Jamil and Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Siddique, Md. Nurul Islam and Fung, Lee Sui (2019) Peat Swamp Groundwater Treatment: Efficiency of Mixed Citrus Peel and Kernel Activated Carbon Layer. In: 11th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2019) , 19-20 November 2019 , Kuantan, Pahang. pp. 1-10.. (Unpublished) (Unpublished)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and M. H., Aiman and Q., Zaifuddin (2019) The effect of laser surface hardening on surface hardness of mild steel. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-7.. (Unpublished) (Unpublished)

Muhammad Nazmi Hadi, Roslan and Nor Atiqah, Zolpakar and Normah, Mohd Ghazali and Fatimah Al-Zahrah, Mohd Saat (2019) Application of 3D printing technology in thermoacoustic stack fabrication. In: The 11th International Meeting on Advances In Thermofluids (IMAT2019) , 7-8 November 2019 , Chikushi Campus, Kyushu University, Japan. pp. 1-6.. (Unpublished) (Unpublished)

Munira, Halili and Fernando, Yudi (2019) A reflection of local supplier development towards sustainable social supply chain. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 726-735.. ISSN 2518-668X (Published)

Mustaffa, Zuriani and Sulaiman, Mohd Herwan and Mohsin, M. F. M. and Yusof, Y. and Ernawan, Ferda and Rosli, K. A. M. (2019) An application of hybrid swarm intelligence algorithms for dengue outbreak prediction. In: 2019 IEEE Jordan International Joint Conference on Electrical Engineering and Information Technology, JEEIT 2019 , 09-11 April 2019 , Amman, Jordan. pp. 731-735. (8717436). ISBN 978-153867942-5 (Published)

N., Abdullah and Jaafar, Jamiluddin and Hagos, F. Y. and Azri, Alias and N. S. N., Azmi (2019) Experimental investigation of pineapple leaf fiber as biomass fuel for renewable energy resource. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished) (Unpublished)

N. A., Mutalib and I., Ismail and S. M., Soffie and S. N., Aqida (2019) Magnetorheological finishing on metal surface: a review. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012092). ISSN 1757-899X (Published)

N. A. M., Radzi and K. A., Masri and Putra Jaya, Ramadhansyah and N. E., Jasni and A. K., Arshad and J., Ahmad and N., Mashros and H., Yaacob (2019) Stability and resilient modulus of porous asphalt incorporating steel fiber. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 185-189.. (Published)

N. A. N., Azman and K. A., Masri and Putra Jaya, Ramadhansyah and Mohd Shamsul Azmi, Samsudin and A., Ismail and A. K., Arshad and E., Shaffie and A. H., Norhidayah and M. R., Hainin (2019) Volumetric Properties and Resilient Modulus of Stone Mastic Asphalt incorporating Cellulose Fiber. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 190-194.. (Published)

N. A. S., Muhamad and N. M., Mohktar and Rosmawati, Naim and W. J., Lau and A. F., Ismail (2019) Current research on the applications of membrane distillation in wastewater treatment-a review. In: The 11th International Meeting on Advances In Thermofluids (IMAT2019) , 7-8 November 2019 , Chikushi Campus, Kyushu University, Japan. pp. 1-12.. (Unpublished) (Unpublished)

N. A. Z., Abdullah and M. S. M., Sani and Salwani, Mohd Salleh (2019) Comparison of crash behaviour prediction of a car crash box using initial and updated finite element model. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-10., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

N. J., Mohd Jamal and Ku Muhammad Naim, Ku Khalif and Mohd Sham, Mohamad (2019) Reliability fuzzy clustering algorithm for wellness of elderly people. In: 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICOAIMS 2019) , 23-25 July 2019 , Kuantan, Pahang. pp. 1-10.. (Unpublished) (Unpublished)

N. J., Mohd Jamal and Ku Muhammad Naim, Ku Khalif and Mohd Sham, Mohamad (2019) The implementation of z-numbers in fuzzy clustering algorithm for wellness of chronic kidney disease patients. In: Journal of Physics: Conference Series; 2nd International Conference on Applied and Industrial Mathematics and Statistics 2019, ICoAIMS 2019 , 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-12., 1366 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

N. K., Romli and M. R. M., Rejab and Xiaoxia, Jiang and Mohamad Nazirul Mubin, Merzuki (2019) Numerical modelling response of laser welded sandwich panel under three-point bending test. In: IOP Conference Series: Materials Science and Engineering: 1st International Postgraduate Conference on Mechanical Engineering (IPCME 2018) , 31 October 2018 , UMP Pekan, Pahang. pp. 1-7., 469 (012060). ISSN 1757-899X (Published)

N. M., Maliessa and S. R. A., Idris (2019) Effect of different amount of Silicon Carbide on SAC Solder-Cu Joint performance by using Microwave hybrid heating method. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012110). ISSN 1757-8981 (Published)

N. M., Sidek and Mohamad Rizza, Othman (2019) Assessment of heat pumping technology in oleochemical fatty acid fractionation. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (012012). ISSN 1757-899X (Published)

N. S., Noor Azmi and Siti Zubaidah, Sulaiman and A., Ramli and R. M., Kasmani and Siti Kholijah, Abdul Mudalip and Rohaida, Che Man and Shalyda, Md Shaarani and Zatul Iffah, Mohd Arshad and Nur Aqidah, Muhammad Harinder Khan and N. H., Semawi (2019) Biogas flame propagation in the interconnected pipe: The effect of biogas/air mixture concentration. In: IOP Conference Series: Earth and Environmental Science, International Conference on Sustainable Energy and Green Technology , 11-14 December 2018 , Kuala Lumpur, Malaysia. pp. 1-6., 268 (012032). ISSN 1755-1315 (Published)

N. S., Shamsuddin and Fahmi, Samsuri and Vigneswaran, Narayanamurthy (2019) Digital expert system for smart aquaculture farming. In: 11th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2019) , 19-20 November 2019 , Kuantan, Pahang. pp. 1-7.. (Unpublished) (Unpublished)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama and D., Ramasamy and M. A., Maleque (2019) Preparation methods and challenges of hybrid nanofluids: A review. In: 4th International Symposium on Fluid Mechanics and Thermal Sciences (4TH IS-FMTS 2019) , 13-15 December 2019 , Palm Garden Hotel IOI Resort City, Putrajaya, Malaysia. pp. 1-13.. (Unpublished) (Unpublished)

Nabila, Tamar Jaya and Siti Rabiatull Aisha, Idris (2019) Fibre laser soldering operation and its effect onto intermetallic compound at the solder joint: short review. In: Electronic Packaging Interconnect Technology Symposium , 22-26 November 2019 , Penang, Malaysia. pp. 1-9.. (Unpublished) (Unpublished)

Najwa Hayati Abdul, Halim and Suriyati, Saleh and Noor Asma Fazli, Abdul Samad (2019) Optimization of oil palm empty fruit bunch gasification temperature and steam to biomass ratio using response surface methodology. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-10., 702 (012006). ISSN 1757-8981 (Published)

Nawanir, Gusman and Binalialhajj, Mohammed and Lim, Kong Teong and Mohd Hanafiah, Ahmad (2019) Becoming lean: the way towards sustainability of higher educations institutions. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 603-626., 2019. ISSN 2518-668X (Published)

Nazlan, Mohamed Nazidin and Ishak, Ismail and Hasnah, Haron (2019) The intention to enroll among students of private higher learning institutions. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 498-510., 2019. ISSN 2518-668X (Published)

Nik Nurharyantie, Nik Mohd Kamil and Mohd Yazid, Abu and Nurul Farahin, Zamrud and Filzah Lina, Mohd Safeiee and Muchamad, Oktaviandri (2019) Application of mahalanobis-taguchi system on electrical & electronic industry. In: 4th International Conference on Engineering Technology (ICET 2019) , 6-7 July 2019 , DITC, Kemaman, Terengganu. pp. 1-6.. (In Press / Online First) (In Press / Online First)

Nik Ruqiyah, Nik Hassan and Noor Mazni, Ismail and Dewan Muhammad, Nuruzzaman and Noraini, Mohd Razali and Suriati, Ghazali (2019) The effect of MAPE compatibilizer agent on the tensile strength of recycled PET/HDPE plastic composite. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 484-489.. ISBN 978-981-15-0950-6 (Published)

Noor Sarbani, Wan Muhammad and Nurfaizah, Yusof and Mazita, Mokhtar (2019) The effectiveness of the environmental management system (EMS) implementation in green supply chain: A case study. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 943-962., 2019. ISSN 2518-668X (Published)

Nor Aishah, Hashim and Hasnah, Haron and Daing Mohd Nasir, Ibrahim (2019) Leadership and innovation on performance of private higher education institutions in Malaysia. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 511-526., 2019. ISSN 2518-668X (Published)

Nor Rokiah Hanum, Md. Haron and Iman Haddad Qaisara Dhia, Mohd Mahzan (2019) Ethics in procurement: A case study in a logistic company. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 930-942., 2019. ISSN 2518-668X (Published)

Nor Shafiqah, Mohd-Nasir and Nguyen, Trinh Duy and Jun, Lau N. and Mahadi, Bahari and Phuong, Pham T. T. and Bawadi, Abdullah and Vo, Dai-Viet N. (2019) Production of syngas from ethanol CO2 reforming on La-doped Cu/Al2O3 : Impact of promoter loading. In: AIP Conference Proceedings; 6th International Conference on Environment: Empowering Environment and Sustainable Engineering Nexus Through Green Technology, ICENV 2018 , 11-13 December 2018 , Penang. pp. 1-11., 2124 (020011). ISSN 0094-243X ISBN 978-073541864-6 (Published)

Nor Syafikah, Ayob and Nor Alisa, Mohd Damanhuri (2019) Numerical construction of stress field under wedge indentation. In: 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICOAIMS 2019) , 23-25 July 2019 , Kuantan, Pahang. pp. 1-10.. (Unpublished) (Unpublished)

Nor Syahidatul Nadiah, Ismail and Muhammad Nazrin, Kamaruddin and Nor Saradatul Akmar, Zulkifli and Syazana Syahirah, Jamaluddin (2019) Parents-Teacher Assisting Monitoring Application (PTAMA) System. In: IEEE International Conference on System Engineering and Technology (ICSET 2019) , 7 October 2019 , Shah Alam, Selangor, Malaysia. pp. 1-7.. ISBN 978-1-7281-0758-5 (Published)

Norazlianie, Sazali and Mohd Syafiq, Yusoff and Ihsan Naiman, Ibrahim and Haziqatulhanis, Ibrahim and Mohd Nizar, Mhd Razali and Wan Norharyati, Wan Salleh (2019) Dip-coating methods for carbon membrane fabrication: Effects of coating-carbonization-cycles on Hydrogen separation prepared from BTDA-TDI/MDI (P-84) polyimide blends with Nanocrystalline cellulose (NCC). In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 384-389.. ISBN 978-981-15-0950-6 (Published)

Norizam, Sulaiman and Al-Fakih, Nawfan Mohammed Mohammed Ahmed and Rashid, Mamunur and M. S., Jadin and Mahfuzah, Mustafa and Fahmi, Samsuri (2019) Offline EEG-based DC Motor Control for Wheelchair Application. In: The 11th National Technical Seminar on Unmanned System Technology 2019 (NUSYS’19) , 2-3 December 2019 , UMP, Gambang Campus, Kuantan, Malaysia. pp. 1-14.. (Unpublished) (Unpublished)

Norizam, Sulaiman and Beh, See Ying and Mahfuzah, Mustafa and Mohd Shawal, Jadin (2019) Offline LabVIEW-based EEG Signals Analysis for Human Stress Monitoring. In: 9th IEEE Control And System Graduate Research Colloquium (ICSGRC 2018) , 3-4 August 2018 , Shah Alam, Selangor. pp. 126-131. (18504705). ISBN 978-1-5386-6321-9 (Published)

Norlida, Jamil and A. R., Yusoff (2019) Effect of Machining Process Parameters on Acceleration Signal in Determining Surface Quality of Milling Process at Ductile Iron. In: Joint Conference of 4th International Manufacturing Engineering Conference (iMEC) & 5th Asia-Pacific Conference on Manufacturing System (APCOMS) , 21-22 August 2019 , Putrajaya, Malaysia. pp. 1-6.. (Unpublished) (Unpublished)

Norul Malakiah, Sidek and Mohamad Rizza, Othman (2019) A review of heat integration system in dividing wall column for oleochemicals separation. In: Materials Today: Proceedings; 2018 International Conference on Chemical Sciences and Engineering: Advance and New Materials, ICCSE 2018 , 7-8 November 2018 , Melaka. pp. 1225-1231., 19. ISSN 2214-7853 (Published)

Nur Ain Zakiah, Mohd Yusof and Hasnah, Haron and Ishak, Ismail and Chye, Ong Hock (2019) Independence of internal audit unit influence the internal audit capability of Malaysian public sector organizations. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1230-1253., 2019. ISSN 2518-668X (Published)

Nur Ashikin, Jamin and Noor Asma Fazli, Abdul Samad and Suriyati, Saleh (2019) Anhydrous weight loss kinetics model development for torrefied green waste. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-10., 702 (1). ISSN 1757-8981 (Published)

Nur Athirah, Mohamad Basir and Abdul Aziz, Mohd Azoddein and Abdulhalim, Abdulrazik and Wan Zulaisa Amira, Wan Jusoh and Nur’aishah, Zarime and Nur Asmaa' Asilah, Azman (2019) The use of laddle furnace slag in the treatment of contaminants water in acid mine drainage. In: 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished) (Unpublished)

Nur Ezreen, Jasni and K. A., Masri (2019) Performance of stone mastic asphalt incorporating steel fiber. In: 3rd National Conference on Wind and Earthquake Engineering & International Seminar on Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8.. (Unpublished) (Unpublished)

Nur Khalidah, Zainuddin and Ahmad Salihin, Samsudin (2019) Electrochemical properties cmc/k-carrageenan derivative hybrid solid bio-polymer electrolytes system. In: International Meeting On Collaboration Technologies 2019 (IMCT 2019) , 28 – 29 March 2019 , Yogyakarta, Indonesia. pp. 1-6.. ISSN 2087-2100 (Unpublished) (Unpublished)

Nur Syahirah, Kamarudin and Rohayu, Jusoh and Herma Dina, Setiabudi and Nuramira Fateha, Sukor and Jun Haslinda, Shariffuddin (2019) Potential nanomaterials application in wastewater treatment : Physical, chemical and biological approaches. In: 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9-11 August 2020 , Kuala Lumpur. pp. 107-114., 42. ISSN 2214-7853 (Published)

Nur Yani, Che Hussin and Muhammad Nubli, Abdul Wahab and Syakira, Mohamad Alba (2019) Could emotion be measured by computer? The use of emwave biofeedback tool to investigate the effect of visual tafakur towards stress. In: The 3rd International Conference on Sustainable Innovation (ICoSI 2019) , 30-31 July 2019 , Yogyakarta. pp. 1-6.. (Unpublished) (Unpublished)

Nurain, Abdul Mutalib and Izwan, Ismail and Soffarina M., Soffie and Syarifah Nur Aqida, Syed Ahmad (2019) Rheological Properties of Magnetorheological Polishing Fluid for Micro Mould Polishing. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 490-496.. ISBN 978-981-15-0950-6 (Published)

Nurasilah, Khamar Ludin and M. H., Sulaiman and Mohd Razali, Daud and Mohd Mawardi, Saari and Amir Izzani, Mohamed and Mohamad Kamarol, Mohd Jamil (2019) Effect of different edge radius of electrode on electric field distribution using finite element method (FEM). In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018) , 20 October 2018 , Shah Alam, Malaysia. pp. 94-98. (8603687). ISBN 978-1-5386-5654-9 (Published)

Nurazima, Ismail and Z. M., Hafizi and Che Ku Eddy Nizwan, Che Ku Husin and S., Ali (2019) Simulation of lamb wave interactions with defects in a thin plate. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-7., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Nurud Suria, Suhaimi and Sa'ari, Mustapha and Abdullah, I. and Normariah, A. and Mohd Rafee, Baharudin (2019) Influence of natural smoke vent opening in stairway of multistorey building. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (012056). ISSN 1757-8981 (Published)

Nurul Amira, Mhd Rizal and Shuhairie, Mohammad and Ahmad Azwan, Abdul Razak and Mohd Falfazli, Mat Jusof and Ahmad Nor Kasruddin, Nasir and Mohd Ashraf, Ahmad and Addie Irawan, Hashim (2019) Hybrid sine-spiral dynamic algorithm for dynamic modelling of a flexible manipulator. In: IEEE 19th International Conference on Control, Automation and Systems (ICCAS 2019) , 15-18 October 2019 , Jeju, Korea (South). pp. 1-6.. ISBN 978-89-93215-17-5 (Published)

Nurul Farahin, Zamrud and Abu, Mohd Yazid and Nik Nurharyantie, Nik Mohd Kamil and Filzah Lina, Mohd Safeiee and Oktaviandri, Muchamad (2019) A review on the application of activity-based costing and time driven activity-based costing in manufacturing industry. In: 4th International ‎Conference on Engineering ‎Technology (ICET 2019) , 6-7 July 2019 , DITC Kemaman, Terengganu, Malaysia. pp. 1-6.. (In Press / Online First) (In Press / Online First)

Nurul Farahin, Zamrud and Mohd Yazid, Abu and Nik Nurharyantie, Nik Mohd Kamil and Filzah Lina, Mohd Safeiee and Oktaviandri, Muchamad (2019) Application of Activity-Based Costing In Electronic Manufacturing. In: 4th International ‎Conference on Engineering ‎Technology (ICET 2019) , 6-7 July 2019 , DITC Kemaman, Terengganu, Malaysia. pp. 1-6.. (In Press / Online First) (In Press / Online First)

Nurul Farhanah, Mohd Idres and Hasnah, Haron and Mohd Hanafiah, Ahmad (2019) Factors influencing the intention of recipient to pay back education loan in state foundation. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 527-536., 2019. ISSN 2518-668X (Published)

Nurul Fatimah, Abdullah and Abbas, A. Wahab and Mohd Azri Hizami, Rasid (2019) Study of temperature rise in small brushed DC motor components under different speed. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012098). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Nurul Khair, Ishak and Hasnah, Haron and Ishak, Ismail (2019) Ethical leadership, ethical climate and unethical behaviour in institutions of higher learning. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 408-422., 2019. ISSN 2518-668X (Published)

Nurulain, S. and Sharif, N. O. and Siddiq, F. and Salim, M. R. and Hadi, Manap (2019) Light intensity comparison for different type of light sources. In: 16th Kyoto International Conference on Science, Engineering, Technology and Natural Resources (SETNR-19) , 26-28 November 2019 , Kyoto Garden Palace Hotel, Japan. pp. 1-4.. (Unpublished) (Unpublished)

Nurulfadzilah, Hasan and Nur Shahira, Mat Hussain and Ahmad Afif, Mohd Faudzi and Syamimi Mardiah, Shaharum and Nurhafizah, Abu Talip Yusof and Nurul Hazlina, Noordin and Nur Alia Athirah, Mohtadzar and Mohamad Shaiful, Abdul Karim (2019) Cured epoxy resin dielectric characterization based on accurate waveguide technique. In: AIP Conference Proceedings; 5th International Conference on Green Design and Manufacture (IConGDM 2019) , 29-30 April 2019 , Kota Bandung, Jawa Barat, Indonesia. pp. 1-6., 2129 (020080). ISSN 0094-243X ISBN 9780735418714 (Published)

Nuruzzaman, D. M. and Kusaseh, N. and Iqbal, AKM Asif and Khan, Maksudur R. and Azmir, Azhari and Zamzuri, Hamedon and Chan, Shin Yi (2019) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings; 4th Advanced Materials Conference 2018, AMC 2018 , 27 - 28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29. ISSN 2214-7853 (Published)

Omran, Mohamed A. and Izzeldin, I. Mohd and Abu Zaharin, Ahmad and Almelian, Mohamad Milood and Fahmi, Samsuri and Muhamad Zahim, Sujod and Walid, K. and Salem, Mohamed (2019) Utilization of filter harmonic current based on shunt hpf within the acceptable IEEE -519 standard. In: 5th International Conference On Electrical, Control And Computer Engineering (INECCE2019) , 29-30 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-10.. (Unpublished) (Unpublished)

Pebrianti, Dwi and Indra, Riyanto and Bayuaji, Luhur and Muhammad Syafrullah, . and Arumgam, Yogesvaran and Nurnajmin Qasrina, Ann (2019) PID controller design for mobile robot using Bat Algorithm with Mutation (BAM). In: IEEE 6th International Conference on Electrical Engineering, Computer Science and Informatics (EECSI 2019) , 18-20 September 2019 , Bandung, Indonesia. pp. 1-6.. ISBN 978-602-0737-30-0 (Published)

Pham, Tri Nhut and Chinh Nguyen, Duy and Duc Lam, Tri and Thinh, Pham Van and Le, Xuan Tien and Vo, Dai-Viet N. and Vu, Quang Hieu and Nguyen, Trinh Duy and Bach, Long Giang (2019) Extraction of anthocyanins from Butterfly pea (Clitoria ternatea L. Flowers) in Southern Vietnam: Response surface modeling for optimization of the operation conditions. In: IOP Conference Series: Materials Science and Engineering, 2018 the 6th International Conference on Mechanical Engineering, Materials Science and Civil Engineering , 21-22 December 2018 , Xiamen, China. pp. 1-6., 542 (012032). ISSN 1757-8981 (Published)

Pi Remli, Mohd Aminuddin and Ghazali, M. F. and Azmi, W. H. and Mohd Yusof, M. F. and M. Yusop, Hanafi and Azmi, M. L. (2019) Leak localization using empirical mode decomposition and teager-kaiser energy operator analysis based on pressure transient signal: experimental study. In: IOP Conference Series: Materials Science and Engineering; 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 Oktober 2018 , Universiti Malaysia Pahang, Pekan. pp. 1-10., 469 (1). ISSN 1757-8981 (Published)

Pi Remli, Muhammad Aminuddin and Ghazali, M. F. and Azmi, W. H. and M. Yusof, M. F. and M. Yusop, Hanafi and Azmi, M. L. (2019) Implementation of I-kaz with Teager-Kaiser energy operator in solving leakage problem using synthetic signal. In: IOP Conference Series: Materials Science and Engineering; 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 Oktober 2018 , Universiti Malaysia Pahang, Pekan. pp. 1-8., 469 (1). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Praptijanto, Achmad and Santoso, Widodo Budi and Nur, Arifin and Putrasari, Yanuandri and Dimyani, Ahmad and Suherman, Suherman and Pratama, Mulia and Wahono, Bambang and Wardana, Muhammad Khristamto Aditya and Rosli, Abu Bakar (2019) CFD study several injection timing on homogeneous charge compression ignition hydrogen diesel dual fuels. In: Proceeding - 2019 International Conference on Sustainable Energy Engineering and Application: Innovative Technology Toward Energy Resilience, ICSEEA 2019 , 23-24 October 2019 , Tangerang. pp. 95-100. (8938644). ISBN 978-172813931-9 (Published)

Priyatharishini, Mardarveran and N. M., Mohktar (2019) Effect of pH of Wastewater on Turbidity Reduction using Jackfruit Peel (Artocarpus heterophyllus) Coagulant. In: International Conference of Sustainable Environmental Technology (ISET2019) , 20-22 August 2019 , Johor, Malaysia. pp. 1-17.. (Unpublished) (Unpublished)

Puteri Fadzline, Muhamad Tamyez and Gerth, Natalie Christiane Isabella and Khairul Firdaus, Anuar (2019) Flood-related disaster communication and humanitarian logistics. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 15-39., 2019. ISSN 2518-668X (Published)

Quanjin, Ma and M. R. M., Rejab and M. S., Idris and Mohamad Nazirul Mubin, Merzuki and Shaoliang, Huang (2019) Compressive properties on the spherical-roof contoured-core with different amounts of diamond-shaped notches. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-6.. (Unpublished) (Unpublished)

Quanjin, Ma and M. R. M., Rejab and M. S., Idris and Zhang, Bo and Merzuki, M.N.M. and Kumar, Nallapaneni Manoj (2019) Wireless technology applied in 3-axis filament winding machine control system using MIT app inventor. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-12., 469 (012030). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Quanjin, Ma and Mohamad Nazirul Mubin, Merzuki and Rejab, M. R. M. and Noh, M. Z. C. (2019) Compressive behaviour of aluminium rectangular hollow tube using Digital Image Correlation (DIC) method. In: IOP Conference Series: Materials Science and Engineering; 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan. pp. 1-11., 863 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

R. A., Bahamid and Doh, Shu Ing and M. A., Al-Sharaf (2019) Risk factors affecting the construction projects in the developing countries. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering , 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-7., 244 (012040). ISSN 1755-1315 (Published)

R. A., Rahman and A. R., Radzi and Saad, M. Syamsyul H. and S. I., Doh (2019) Factors affecting the success of highway construction projects : the case of Malaysia. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 205-212.. (Published)

R. M., Yaacob and M. A. H., Hashim and M. S. M., Sani (2019) Finite element modeling and updating of the composite plate structure. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012013). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Rahman, Hammad A. and Khairi, N. D. A. and M. S. M., Sani (2019) Finite element model updating of dissimilar plate with rivet joint. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-10., 1262 (012035). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Raj, K. R. and Sunarti, Abd Rahman (2019) Preliminary fractional factorial design (FFD) study using incorporation of graphene oxide in PVC in mixed matrix membrane to enhance CO2 /CH4 separation. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-15., 702 (012041). ISSN 1757-8981 (Published)

Rashid, Mamunur and Norizam, Sulaiman and Mahfuzah, Mustafa and Sabira, Khatun and Bari, Bifta Sama and Hasan, Md Jahid (2019) Recent Trends and Open Challenges in EEG based Brain-Computer Interface Systems. In: 5th International Conference On Electrical, Control And Computer Engineering (INECCE2019) , 29-30 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-11.. (Unpublished) (Unpublished)

Rashid, Mamunur and Norizam, Sulaiman and Mahfuzah, Mustafa and Sabira, Khatun and Bari, Bifta Sama and Hasan, Md Jahid and Al-Fakih, Nawfan M. M. A. (2019) Investigating the Possibility of Brain Actuated Mobile Robot through Single Channel EEG Headset. In: 5th International Conference On Electrical, Control And Computer Engineering (INECCE2019) , 29-30 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-14.. (Published)

Rashid, Shah Samiur and Huan, Hu Shian and Mohd Hasbi, Ab. Rahim and Sikder, Md. Belal Hossain and Sasi, Ahmed Abdulsalam H. (2019) Laccase enzyme immobilization on ferromagnetic support material for oil palm empty fruit bunches (OPEFB) pretreatment. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Design and Manufacturing Engineering , 15-17 July 2019 , Australia. pp. 1-6., 627 (012025). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Rashid, Shah Samiur and Ukaegbu, Chinonso Ishmael and Hazrulrizawati, Hamid and Mohd Hasbi, Ab. Rahim and Zaidul, I. S. M. (2019) Antioxidant and antiproliferative activities of the extracts of Hypsizygus tessellatus (brown and white var.) and Flammulina velutipes cap. In: International Conference on Environment and Life Science (ICENLISC-19) , 21 May 2019 , Sydney, Australia. pp. 1-20.. (Unpublished) (Unpublished)

Ravendran, R. R. and Abdul Halim, Abdul Razik and Roziah, Zailan (2019) Aspen Plus simulation of optimal biogas production in anaerobic digestion process. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (012001). ISSN 1757-899X (Unpublished) (Unpublished)

Roduan, Siti Faqihah and Wahab, J. A. and Aiman, M. H. and Zaifuddin, A. Q. and Mohd Salleh, M. A. A. and Mahadzir, I. (2019) Effect of laser loop on surface morphology of copper substrate and wettability of solder joint. In: IOP Conference Series: Materials Science and Engineering; Electronic Packaging Interconnect Technology Symposium 2019, EPITS 2019 , 24 - 25 November 2019 , Penang. pp. 1-8., 701 (012040). ISSN 1757-8981 (Published)

Rosdi, Daud and M. Z. H., Jantan and H. M., Ayu and A., Shah (2019) Investigation of Fatigue Failure Performance of Ankle Implant Mobile Bearing using Finite Element Method. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference on Vibration, Sound and System Dynamics (ICVSSD 2019) , 1-3 December 2019 , Penang, Malaysia. pp. 1-9., 815 (012016). ISSN 1757-899X (Published)

Ruhaizad, Ishak and Ali, A. and Nazir, Muhammad S. and Malik, Muhammad Z. (2019) A Risk Assessment of Transmission Line Overload Based on MLSI/PSO. In: ICCDE' 19: Proceedings of the 2019 5th International Conference on Computing and Data Engineering , 4-6 May 2019 , Shanghai, China. pp. 24-28.. ISBN 978-1-4503-6124-8 (Published)

S., Kassim and Hasliza, A. Rahim and P. J., Soh and Mohamedfareq, Abdulmalek and M., Jusoh and M. H., Jamaluddin and Nur Syahirah, Sabli and M. N., Yassin and T., Sabapathy and F. H., Wee and M. N., Osman and Noormariani, Ismail (2019) Flexible Co-Planar Waveguide (CPW)-fed y-shaped patch UWB antenna for off-body communication. In: Journal of Physics: Conference Series, The 1st International Conference on Education and Technology (ICETECH) , 8 August 2019 , Madiun, Indonesia. pp. 1-7., 1464 (012058). ISSN 1742-6596 (Published)

S. D., Vijaya Kumar and Zainatul Bahiyah, Handani and Rohana, Abu (2019) Kinetic study of asymmetric synthesis of chiral amine with immobilized transaminase. In: Energy Security and Chemical Engineering Congress (ESCHE2019) , 17-19 July 2019 , Parkroyal Resort Penang, Malaysia. pp. 1-4.. (Unpublished) (Unpublished)

Saad, M. Syamsyul H. and W. R., Wan Salleh and R. A., Rahman and S. I., Doh (2019) Investigating the relationship between site supervision and IBS based construction projects. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 274-279.. (Published)

Saffuan, Wan Ahmad and Khairunisa, Muthusamy and M. H., Hashim and A. M., Albshir Budiea and Nur Farhayu, Ariffin (2019) Effect of unground palm oil fuel ash as partial sand replacement on compressive strength of oil palm shell lightweight concrete. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 236-241.. (Published)

Saidah An’nisaa, S. and Nur Farhayu, Ariffin and Nur Asyekin, R. and Mohamad Idris, Ali and Noram Irwan, Ramli (2019) Effect of government policy towards the abandoned housing project in Malaysia. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 227-235.. (Published)

Salma, Yaakub and Alsibai, Mohammad Hayyan (2019) An innovative autonomous wheelchair conversion kit. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-12., 2059 (020014). ISBN 978-0-7354-1787-8 (Published)

Sami, W. and M. R., Abdul Hamid (2019) Lipid profile of type 2 diabetics in Almajmaah, Saudi Arabia. In: Journal of Physics: Conference Series; 2nd International Conference on Applied and Industrial Mathematics and Statistics 2019, ICoAIMS 2019 , 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-7., 1366 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Senthil Kumar, T. and Mohd Ridzuan, Darun and Mohammad, Aslam (2019) Impact of Brexit on construction stocks listed on Bursa Malaysia. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 176-188., 2019. ISSN 2518-668X (Published)

Shahoodh, Mohammed Khalid and Mohd Sham, Mohamad and Yuhani, Yusof and Sahimel Azwal, Sulaiman (2019) Subgraph of Compatible Action Graph for Finite Cyclic Groups of p-Power Order. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019) , 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 1366 (012064). ISSN 1742-6596 (Published)

Shamsulkahar, Abdul Shukor and Suhaidah, Hussain (2019) Factors influencing the effective leadership succession planning: Study on a Malaysian GLC. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 963-991., 2019. ISSN 2518-668X (Published)

Shanono, Ibrahim Haruna and Nor Rul Hasma, Abdullah and Aisha, Muhammad (2019) Filter Design for a Nine Level Voltage Source Inverter for Renewable Energy Applications. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018 , 27-28 September 2018 , Universiti Malaysia Pahang. pp. 571-585., 538. ISBN 978-981-13-3708-6 (Published)

Sharifah Sakinah, Syed Abd Mutalib and Siti Zanariah, Satari and Wan Nur Syahidah, Wan Yusoff (2019) A new robust estimator to detect outliers for multivariate data. In: Journal of Physics: Conference Series; 2nd International Conference on Applied and Industrial Mathematics and Statistics 2019, ICoAIMS 2019 , 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-10., 1366 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Shoumy, Nusrat Jahan and Rahaman, D. M. and Sabira, Khatun and Wan Nur Azhani, W. Samsudin and Mohd Hisyam, Mohd Ariff and M. N., Morshed and Islam, Minarul and S. N. A., Manap and Mohd Falfazli, Mat Jusof (2019) Multi-hop file transfer in WiFi direct based cognitive radio network for cloud back-up. In: InECCE2019: Proceedings of the 5th International Conference on Electrical, Control & Computer Engineering , 29th July 2019 , Kuantan, Pahang, Malaysia. pp. 389-400., 632. ISBN 978-981-15-2317-5 (Published)

Shuhairie, Mohammad and Mohd Falfazli, Mat Jusof and Nurul Amira, Mhd Rizal and Ahmad Azwan, Abdul Razak and Ahmad Nor Kasruddin, Nasir and Raja Mohd Taufika, Raja Ismail and Mohd Ashraf, Ahmad (2019) Sine based bacterial foraging algorithm for a dynamic modelling of a twin rotor system. In: 19th International Conference on Control, Automation and Systems (ICCAS 2019)) , 15-19 October 2019 , Jeju, Korea (South). pp. 1-6.. ISBN 978-89-93215-17-5 (Published)

Sikandar, Tasriva and Wan Nur Azhani, W. Samsudin and Kamarul Hawari, Ghazali and Mohammad Fazle, Rabbi (2019) Triangle and trapezoid area features for gait authentication. In: 9th IEEE Control And System Graduate Research Colloquium (ICSGRC 2018) , 3-4 August 2018 , Shah Alam, Selangor. pp. 1-6. (8657624). ISBN 978-1-5386-6321-9 (Published)

Siti Hanani, Mat Yasin and Muhammad Khairul Anuar, Mohamed and Zulkhibri, Ismail and Widodo, Basuki and Mohd Zuki, Salleh (2019) MHD flow and heat transfer of ferrofluid on stagnation point along flat plate with convective boundary condition and thermal radiation effect. In: Journal of Physics: Conference Series, 2nd International Conference on Applied and Industrial Mathematics and Statistics (ICoAIMS 2019) , 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-10., 1366 (012008). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Siti Nor Amira, Rosli and Rohaida, Che Man and N., Masngut (2019) Factorial experimental design for xylanase production by Bacillus sp. isolated from Malaysia landfill soil. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-10., 736 (022074). ISSN 1757-899X (Published)

Siti Norfatihah, Zulkifli and Norhafizah, Md Sarif and Mohd Zuki, Salleh and Ezzatul Farhain, Azmi (2019) MHD stagnation point flow of micropolar nanofluid with soret and dufour effects. In: Journal of Physics: Conference Series, 2nd International Conference on Applied and Industrial Mathematics and Statistics (ICoAIMS 2019) , 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-10., 1366 (012015). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Siti Nur Atiqah, Mohd Sofi and Mohd Aizudin, Abd Aziz and Nur Suhaila, Anang Japar and Nurul Waheeda, Abdu Rahman and Mohd Yusri, Mohd Yunus (2019) Preparation and characterization of grease formulated from waste transformer oil. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012034). ISSN 1757-899X (Published)

Siti Syahirah, Azizan and Nur Farisha Irwayu, Effendy and Zainatul Bahiyah, Handani (2019) Superstructure optimization of bioethanol production from corn stover. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (012016). ISSN 1757-899X (Published)

Siti Zubaidah, Adnan and Noor Asma Fazli, Abdul Samad (2019) Application of extended method of classes for solving population balance equations and optimization study for crystallization process involving dissolution phenomena. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-11., 702 (012021). ISSN 1757-8981 (Published)

Siti Zubaidah, Sulaiman and Nurul Syazwana, Noor Azmi and Azizan, Ramli and Rafiziana, Md Kasmani and Siti Kholijah, Abdul Mudalip and Rohaida, Che Man and Shalyda, Md Shaarani and Zatul Iffah, Mohd Arshad (2019) Numerical simulation on the flame propagation in duct-vented gas explosion: The effect of duct length on the secondary explosion. In: IOP Conference Series: Materials Science and Engineering, Joint Conference on Green Engineering Technology & Applied Computing 2019 , 4-5 February 2019 , Bangkok, Thailand. pp. 1-5., 551 (012009). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Soubam, Triveni and Thuraisingam, Jasyhree and Gupta, Arun and Mohd Aizudin, Abd Aziz (2019) Synthesis of alkaline modified rice starch- NRL as an bioadhesive for wood composite bonding. In: 2nd Wood and Biofibre International Conference , 3-5 December 2019 , Kota Kinabalu, Sabah. pp. 1-2.. (Unpublished) (Unpublished)

Suhaidah, Hussain and Xian, See Huei (2019) Factors affecting employees’ turnover intention in construction companies in Klang, Selangor. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 108-131., 2019. ISSN 2518-668X (Published)

Suhaimi, Mohd Daud and M. S., Najib and Nurdiyana, Zahed and Muhammad Faruqi, Zahari and Nur Farina, Hamidon Majid and Suziyanti, Zaib and Mujahid, Mohamad and Addie Irawan, Hashim and Hadi, Manap (2019) Classification of lubricant oil geometrical odor-profile using cased-based reasoning. In: The 5th International Conference on Electrical, Control and Computer Engineering (INECCE2019) , 29-30 July 2019 , Swiss Garden Beach Resort Kuantan. pp. 1-13.. (Unpublished) (Unpublished)

Syafikah, Ayob and Nor Alisa, Mohd Damanhuri (2019) Numerical approximation of centred fan field region for the indentation of granular material by a smooth rigid wedge. In: AIP Conference Proceedings: The 4th Innovation and Analytics Conference and Exhibition (IACE 2019) , 25-28 March 2019 , Universiti Utara Malaysia, Kedah. pp. 1-2., 2138 (030008). ISSN 0094-243X ISBN 978-0-7354-1881-3 (Published)

Syifak Izhar, Hisham and Mohamad Nazmi, Nasir and Nasrul Hadi, Johari (2019) Comparative analysis on raster, spiral, hilbert, and peano mapping pattern of fragile watermarking to address the authentication issue in healthcare system. In: Communications in Computer and Information Science; 5th International Conference on Dependability in Sensor, Cloud, and Big Data Systems and Applications, DependSys 2019 , 12 - 15 November 2019 , Guangzhou, China. pp. 477-486., 1123 CCIS. ISSN 1865-0929 ISBN 9789811513039 (Published)

Sze Pei, Tan and Siti Nadiah, Mohd Saffe and Siti Aishah, Rusdan (2019) Energy absorption of circular honeycomb out-of-plane dynamic impact under oblique loading. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019 , 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 264-265.. ISBN 978-967-2145-65-3 (online) (Published)

T. N., Pham and B. P., Tran and T. H., Tran and D. C., Nguyen and T. N. P., Nguyen and T. Q., Nguyen and D. V. N., Vo and N. T. H., Le and X. T., Le and T. D., Nguyen and L. G., Bach (2019) Response surface modeling and optimizing conditions for anthocyanins extraction from purple sweet potato (Ipomoea batatas (L.) Lam) grown in Lam Dong province, Vietnam. In: IOP Conference Series: Materials Science and Engineering, The 3rd International Conference on New Material and Chemical Industry , 17-19 November 2018 , Sanya, China. pp. 1-8., 479 (012012). ISSN 1757-8981 (Published)

Tabassum, Shabana and Norhayati, Rosli and Mazma Sayahidatul Ayuni, Mazalan (2019) Mathematical modeling of cancer growth process: A review. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019) , 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-6., 1366 (012018). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Vijayan, Bincy Lathakumary and Izan Izwan, Misnon and Anilkumar, Gopinathan M. and Miyajima, Kieta and Rajan, Jose (2019) Thin metal oxide films on porous carbon for high density charge storage. In: Third International Conference on Advanced Functional Materials (ICAFM 2019) , 9-11 December 2019 , Trivandrum, India. p. 43.. (Published)

Wan Amnin, Wan Yahaya and Raja Nurliyana, Raja Ahmad and Nurul Aini, Mohd Azman and Ahmad Salihin, Samsudin and Wan Faizal, Wan Ishak (2019) Preparation and characterization of semi-rened carrageenan reinforced with cellulose nanofiber incorporated with a-tocopherol as an active food packaging. In: The 32nd Symposium of Malaysia Analytical Sciences (SKAM 32) , 14-16 August 2019 , Port Dickson, Negeri Sembilan, Malaysia. pp. 1-14.. (Unpublished) (Unpublished)

Wan Hasbullah, Mohd Isa and Hunt, Andres and HosseinNia, S. Hassan (2019) Active sensing methods of ionic polymer metal composite (IPMC) : Comparative study in frequency domain. In: RoboSoft 2019 - 2019 IEEE International Conference on Soft Robotics , 14-18 April 2019 , Seoul. pp. 546-551. (8722790). ISBN 978-153869260-8 (Published)

Wan Ismail, Ibrahim and Raja Mohd Taufika, Raja Ismail and Mohamed, Mohd Rusllim (2019) Micro-Hydro Energy Estimation for Hydrokinetic Energy Harnessing at Sungai Lembing. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018 , 27-28 September 2018 , Universiti Malaysia Pahang. pp. 549-562., 13. ISBN 978-981-13-3707-9 (Published)

Wan Syahirah, Wan Samsudin and Rosdiyana, Samad and Kenneth, Sundaraj and Mohd Zaki, Ahmad and Pebrianti, Dwi (2019) Regional assessment of facial nerve paralysis using optical flow method. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018 , 27-28 September 2018 , Universiti Malaysia Pahang. pp. 515-521., 538. ISBN 978-981-13-3708-6 (Online) (Published)

Wan Syahirah, Wan Samsudin and Rosdiyana, Samad and Mohd Zaki, Ahmad and Sundaraj, Kenneth (2019) Forehead lesion score for facial nerve paralysis evaluation. In: IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2019 , 29 June 2019 , Selangor, Malaysia. pp. 102-107. (8825061). ISBN 9781728107844 (Published)

Wan Zulaisa Amira, Wan Jusoh and Sunarti, Abd Rahman and N. M., Mokhtar and A. L., Ahmad (2019) Interaction study between M-Phenylenediamine, Trimesoyl Chloride and Nylon 66 using Molecular Dynamic Simulation. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012030). ISSN 1757-899X (Published)

Yahya, Fatin Nasuha and Mat Suli, Liyana Nadirah and Wan Ibrahim, W. H. and Abdul Rasid, Ruwaida (2019) Thermodynamic evaluation of the aqueous stability of rare earth elements in sulfuric acid leaching of monazite through pourbaix diagram. In: Materials Today: Proceedings; 2018 International Conference on Chemical Sciences and Engineering: Advance and New Materials, ICCSE 2018 , 7 - 8 November 2018 , Melaka. 1647 -1656., 19 (157391). ISSN 2214-7853 (Published)

Youventharan, Duraisamy and Rokiah, Othman and S. M., Arif (2019) The effects of bottom ash in coastal sand. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 289-296.. (Published)

Youventharan, Duraisamy and S. M., Arif and Rokiah, Othman (2019) Ultimate bearing capacity of peat treated with cement columns in physical model. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019) , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 304-310.. (Published)

Yuhani, Yusof and Mohd Sham, Mohamad and Noraziah, Adzhar and Nurfatihah, Mohamad Hanafi and Elizabeth, Marta and Muhamad Faiz, Abu Bakar and Mohd Adhha, Ibrahim (2019) Optimal medicinal cupping points selection for asthma disease via graph colouring: A preliminary study. In: Journal of Physics: Conference Series, 12th Seminar on Science and Technology 2018 , 2-3 October 2018 , Kota Kinabalu, Sabah, Malaysia. pp. 1-7., 1358 (012078). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Zafirah, R. C. and Ummu Kulthum, Jamaludin and Khalijah, Khalid and Luqman, H. M. and Aishah, A. F. Q. A. and Azrina, R. and Basri, M. N. M. and Fatanah, S. and Normy N., A. R. (2019) Study on the blood glucose management with controlled goal feed in Malaysian critically ill patients. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012097). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Zaki, Yasmeen Hafiz and Nour, A. H. and Mohamed, Hybat Salih and R. M., Yunus (2019) The efficiency of membrane anaerobic system (MAS) in treating sugarcane mill effluent (SCME). In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-12., 702 (012032). ISSN 1757-899X (Published)

Zarith Sufia, Azlan and M., Waris and Puteri Fadzline, Muhamad Tamyez (2019) Critical Success Factors for Stakeholder Engagement in Renewable Energy Projects of Malaysia. In: The European Proceedings of Social & Behavioural Sciences EpSBS: ICBSI 2018 - International Conference on Business Sustainability and Innovation , 17-19 October 2018 , Bayan Baru, Penang, Malaysia. pp. 166-173., LXV. ISSN 2357-1330 (Published)

Zhengxiaoming, Aminaimu and Fernando, Yudi (2019) A Concept Paper of Balanced Scorecard for New Product Development. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 569-578.. ISSN 2518-668X (Published)

Zhengxiaoming, Aminaimu and Fernando, Yudi (2019) Why does theory of inventive problem solving matter in Malaysian food and beverage industry? In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 746-757.. ISSN 2518-668X (Published)

Thesis

Abdul Rahman, Zahari (2019) Entrepreneurial intentions and capabilities on student enterprises’ performance in Malaysian higher educational institutions. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Afidatusshimah, Mazlan (2019) Correlation of welding current waveform with welding conditionbased on exploratory data analysis (EDA). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daniyal, Hamdan).

Ahmad, Iftikhar (2019) EFL teacher cognition in grammar teaching: an investigation in the Saudi Arabian bilingual educational context at university level. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Azwan, Abdul Razak (2019) Multi-objective spiral dynamic algorithms-based for a better accuracy and diversity. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Nor Kasruddin, Nasir).

Ahmad Kamal, Kunji (2019) A study on Malaysian roadside safety adopting safety recovery zone corridor concept. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kusbiantoro, Andri).

Ahmed, Ehab Ali (2019) Water level forecasting using feed forward neural networks optimized by African Buffalo Algorithm (ABO). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmed Mostafa, Mohammed Ragab (2019) Investigation of adjustable valve of semi-active damper for improving ride comfort in a passenger car. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Al-Bashiri, Hael Abdullah Hussein (2019) A proposed memory-based collaborative filtering technique based on a new similarity and MADM methods (CF-NSMA) for improving the recommendation accuracy. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdulgabber, Mansoor Abdullateef).

Al-Emran, Mostafa Nadhir Hassan (2019) Extending the technology acceptance model with knowledge management factors to examine the acceptance of mobile learning. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Al-Shetwi, Ali Qasem Saleh (2019) Design and control of large-scale grid-connected photovoltaic power plant with fault ride-through. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sujod, Muhamad Zahim).

Alagorni, Abubaker Hamza (2019) Experimental performance of selective simultaneous water alternating nitrogen (SSWAG-N2) technique for oil recovery in sandstone and carbonate. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Albashir, Walid Ali (2019) A study on determinants of adopting Islamic banking products in Libya: the role of customer involvement and perceived usefulness as mediator. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zainuddin, Yuserrie).

Ali, Ahmed Mahmood (2019) Design of optimal nanoscale channel dimensions of FinFET based on constituent semiconductor materials. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Shaif Abdullah, Waheb Abdul Jabbar).

Ali, Mohammed Rashid (2019) Experimental measurement and prediction of thermophysical properties of methyl tert-butyl ether (MTBE) with methanol, diisopropyl ether (DIPE) and N-methylaniline binary mixtures. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Alim, Samiul (2019) Development of electrochemical biosensor based on SnO2-nanofiber with enhanced electron transfer of redox biomolecule. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aljbour, Nawzat Deeb (2019) Preparation and characterization of chitosan/poly lactic acid nanofibers using electrospinning process for drug delivery applications. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Alkhateeb, Abdullah Nihad (2019) The impacts of intellectual capital on competitive advantage mediated by organizational performance in selected Malaysia research universities. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Amalina Hanani, Ismail (2019) Pozzolanic reactivity of chemically pre-treated palm oil clinker powder (POCP) with hydrochloric acid. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Amirruddin, Abdul Kadir (2019) Tribological performance analysis of nanocellulose-AL2O3-engine oil. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Amri Muaz, Azmimurad (2019) The relationship between technical vocabulary breadth, english language proficiency, and vocabulary learning strategies among engineering undergraduates at Universiti Malaysia Pahang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Anwar, Shahid (2019) An enhanced android botnet detection approach using feature refinement. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zolkipli, Mohamad Fadli).

Ashwinder, Chelliah (2019) Production and characterization of degradable polyethelene terephthalete using pro-degradant additives, polylactic acid and polylactic acid grafted maleic anhydride. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Atta, Mohammed Thamir (2019) The effect of usability and information quality on Malaysian user’s satisfaction of student information systems in higher education institutions. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Azwin, Ahmad (2019) The roles of xanthan gum, potato starch, and sorbitol in the formulation of gluten free bread. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Baarimah, Abdullah Omar Obaid (2019) Structural behaviour of fibers as part of shear reinforcement in reinforced concrete slab. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Bakr, Zinab Hassanien Hassanien (2019) Synthesis and characterization of tin based hybrid nanofibers and nanoflowers as photoelectrode in dye-sensitized solar cells. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Chan, Hwee Geem (2019) Investigation on the occurrence of tles associated positive cloud to ground (+CG) lightning in UMP Pekan. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Amir Izzani, Mohamed).

Che Mohammad Nizam, Che Kamaruddin (2019) Effects of environmental ergonomic factors towards muscles activities for lifting task. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Che Wan Mohd Noor, Che Wan Othman (2019) Experimental and prediction model of low compression marine diesel engine fuelled with palm biodiesel blends. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Das, Debashish (2019) An ensemble of neural network and modified grey wolf optimizer for stock prediction. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sadiq, Ali Safaa).

Din, Fakhrud (2019) A fuzzy adaptive teaching learning-based optimization strategy for generating mixed strength t-way test suites. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kamal Zuhairi, ZamlI).

Dzulaika Nubaillah, Noor (2019) Techno-economic analysis in optimisation of hybrid air-conditioning system combining chilled water storage and solar water heater. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Elfira, Anuar (2019) Thin film composite hollow fiber membrane for separation in biorefinery. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Engku Norfatima, Engku Dahalan (2019) Enhance formulation of organic coating for barrier protection of mild steel upon corrosive environment. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fakhrur Razil Alawi, Abdul Wahid (2019) Characterization and application of torrefied Malaysia biomass as a biofuel for gasification. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Saleh, Suriyati).

Farah Adiba, Azman (2019) Camera geometry determination based on circular's shape for peg-in-hole task. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daud, Mohd. Razali).

Farhana, Kaniz (2019) Design and development of highly efficient nano fluidic flat plate solar collector. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kadirgama, Kumaran).

Farouq, Ahmat (2019) Effect of leaching reagent on leaching process of europium, terbium and yttrium from liquid crystal display. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fayaz, Fahim (2019) Syngas production from ethanol dry reforming over La and Ce promoted Co/Al2O3 catalysts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Haque, Muhammad Ehteshamul (2019) A CFD model development and performance investigation of frost free refrigerator with nanoparticles suspended in the lubricant. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Hasan, Md Munirul (2019) A collaborative model for post flood activities exploiting an enhanced expanding neighborhood search algorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md Arafatur, Rahman).

Hassan Alajmi, Qasim Abdullah (2019) Adoption model for cloud-based E-learning in Omani higher education institutions. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Adzhar, Kamaludin).

Hassanal, Haris (2019) Fabrication & characterization of biomaterials from hydroxylethyl cellulose sponges coated with hydroxy apatite. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hazwani Hawa, Mohammad Sobani (2019) Treatment of palm oil mill effluent using struvite preciptation method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hossain, Mohammed Anwar (2019) Syngas production from methane dry reforming over CeO2 promoted Ni/CaFe2O4 catalyst. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Humaira’, Abdul Latif (2019) Modelling awareness of diabetes mellitus : case study at two public health centres. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rashid, Ab Hamid).

Ishmael, Ukaegbu Chinonso (2019) Study on antiproliferative activity of hypsizygus tessellatus and flammulina velutipes extracts adsorbed on sulphated zirconia nanoparticles against breast cancer cell lines. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Islam, Md Kamrul (2019) An online density-based clustering algorithm for data stream based on local optimal radius and cluster pruning. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zamli, Kamal Zuhairi).

Izzati, Ahmad Rudaini (2019) PVDF-alumina and PVDF-bentonite hollow fiber membrane for CO2 absorption via membrane contactor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Jamil, Roslan (2019) Hybrid solar still with addition of charcoal and oil palm fiber ash for seawater desalination. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Jamiluddin, Jaafar (2019) Characterization of short pineapple leaf fiber reinforced tapioca biopolymer composites. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siregar, Januar Parlaungan).

Jayshree, Thuraisingam (2019) Synthesis and characterization of bio-adhesive using natural rubber latex and bio-based fillers for medium density fibreboard manufacturing. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ju, Soon Yew, @ Yew, Soon Yu (2019) Employees’ organizational citizenship behaviour toward the environment : a conditional mediation model. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khadijah Husna, Abd Hamid (2019) Semi-refined carrageenan/glycerol/α-tocopherol hybrid films as active packaging for extending the shelf life of meat. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khalaf, Emad Taha (2019) An efficient indexing and retrieval of iris biometrics data using hybrid transform and firefly based K-means algorithm title. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: N. Mohammed, Muamer).

Khamisah, Abdul Hamid (2019) Forced convection heat transfer performance of TiO2-SiO2 nanofluids with wire coil inserts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khan, Asadullah (2019) Performance of public sector infrastructure projects in Pakistan : the role of project governance through stakeholder management and benefit management. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Koay, Li Woon (2019) Design and development of a wireless indoor smart energy saving and monitoring. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Manap, Hadi).

Lardhi, Fatima Ali Salah (2019) An analysis of English pronunciation learning strategies among Arab EFL learners in Universiti Malaysia Pahang (UMP). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Radzuan, Noor Raha).

Liew, Shi Yan (2019) Computational fluid dynamics and experimental study of hydrodynamics in an internal airlift reactor. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Gimbun, Jolius).

Ling, Jin Kiong (2019) Synthesis and characterization of Al2O3-SnO2 composite nanofibers by electrospinning for dye-sensitized solar cells. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Lingenthiran, Samylingam (2019) Modelling and verification of TiO2/ZnO/EGW nano coolant on the tin milling tool performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, A/l Kadirgama).

Madan Varmma, Suparmaniam (2019) Suppression of chatter in high-speed milling machine using spindle speed variation method with microphone feedback PID controlller. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Malar Vizhli, Sivaguru (2019) Synthesis of catalyst from eggshell and perna v. Shell for biolubricant production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mazma Syahidatul Ayuni, Mazlan (2019) Stochastic model of cancer growth with the effect of glycosaminoglycans (GAGs) as anticancer therapeutics. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Al Aamin, Razali (2019) Solid state fermentation of Monascus purpureus in stirred drum bioreactor for production of red pigment from oil palm frond. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamd Salih, Sinan Qahtan (2019) Nomadic people optimizer (NPO) for large-scale optimization problems. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdulrahman, A. Alsewari).

Mohammed, Marwah Noori (2019) Synthesis and characterization of thermoresponsive poly (N-vinylcaprolactam) / fillers nanocomposite. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed Al-Fakih, Kamal Ahmed (2019) Investigating the effects of high temperature on the performance of structural steel connections using FE analysis. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azraai, Mohd Razman (2019) Hunger behaviour classification of Lates Calcarifer using machine learning for automatic demand feeder through image processing. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hafizu, Zakaria (2019) Progressive tool wear in machining biomedical alloy using uncoated and titanium diboride coated tungsten carbide tools. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Shahridwan, Ramli (2019) Mathematical modelling of wave impact on landward-inclined and seaward-inclined seawalls. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nor Aida Zuraimi, Md Noar).

Mohd Zamani, Mohd Nor Peah (2019) Analisis kaedah pembuatan, jasad dan nilai estetika tembikar terenang di Pahang. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Wahab, Muhammad Nubli).

Mok, Ren Hao (2019) Model-free wind farm power production optimization using multi-resolution optimized relative step size random search. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ashraf, Ahmad).

Monir, Md. Minhaj Uddin (2019) Bioethanol production from CO-gasification of lignocellulosic biomass and charcoal. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abd Aziz, Azrina).

Muhammad Bilal, Muslim (2019) Model development and performance analysis of integrated gasification process and proton exchange membrane fuel cell. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noor Asma Fazli, Abdul Samad).

Muhammad Ihsan, Abdul Latiff (2019) Experimental analysis and pressureless sintering of powder processed functionally graded nickel alumina plates. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Munirah Ezzah, Tuan Zakaria (2019) Synthesis of superabsorbent carbonaceous fibre polymer via inverse-suspension polymerization for NPK coating. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Natassha, Jamil (2019) Immobilization of cyclodextrin glucanotransferase on polyvinylidene fluoride hollow fiber membrane for cyclodextrin production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nayef, Eman Ghanim (2019) Psychological effects of the recitation of the Quran among university students through the investigation of heart rate variability and breathing behaviour. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nazila, Ishak (2019) Boundary layer flow and heat transfer for Maxwell fluid and viscoelastic nanofluid over a stretching sheet. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Salleh, Mohd Zuki).

Nazratul Zaheera, Abdul Kapor (2019) Esterification of palm fatty acid distillate using sulfate based catalysts. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nazrolnizah, Mohamad Noorzeli (2019) Penggunaan teknik biofeedback dalam program peningkatan prestasi diri dan perniagaan usahawan kecil amanah ikhtiar malaysia (AIM). PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nazrotul Afina, Nazri (2019) Dynamic damage assessment of resistance spot welding for dissimilar plates by using model updating approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Noor Asma, Nik Wil (2019) Chemical constituents and antioxidant activities of Aquilaria malaccensis Lamk. (agarwood) leaves. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Tajuddin, Saiful Nizam).

Nik Nurul Husna, Muhmed Razali (2019) Hybrid energy harvesting of piezoelectric and electromagnetic using vibration excitation of bimorph cantilever beam. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Afifah, Fauzi (2019) Characterization and bioactivities of carboxymethyl cellulase produced by alcaligenes faecalis using disposed x-ray film as the substrate. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Hidayati, Abdul Aziz (2019) Simulated Kalman Filter algorithms for solving optimization problems. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Sakinah, Abdul Shukor (2019) Safe experimentation dynamics algorithm for data-driven PID controller of a class of underactuated systems. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Sakinah, Abdul Shukor (2019) Safe experimentation dynamics algorithm for data-driven PID controller of a class of underactuated systems. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Shafiqah, Mohd Nasir (2019) Ethanol CO₂ reforming over Ce and La promoted Cu/A1₂O3 catalysts for syngas production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhaslinda, Nordin (2019) Organisasi pembelajaran : satu kajian kes di syarikat makanan halal. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norizan, Yusof (2019) Keberkesanan intervensi modul integrasi spiritual dan biofeedback dalam psikoterapi berasaskan badan bagi pelajar bermasalah di institut latihan teknikal. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Nubli, Abd Wahab).

Norlaili, Hashim (2019) Microwave assisted extraction (MAE) of beta-sitosterol from plant legumes pod. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noormazlinah, Ahmad).

Nornasuha, Abdullah (2019) Utilization of palm oil fuel ash (POFA) as silica source of Ni/SBA-15 for CO2 reforming of CH4. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norul Wahida, Kamaruzaman (2019) Synthesis of graphene sand composite by using arenga palm and table sugar to remove methylene blue and nickel from aqueous solution. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Aidah Nabihah, Dandang (2019) Microstructures and properties of CoCrMo alloy by metal injection moulding process. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Sharuzi, Wan Harun).

Nur Aqidah, Muhammad Harinder Khan (2019) The evaluation of premixed biogas/air explosion characteristics in a 20 L closed vessel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Dini, Johari (2019) Production, optimization and characterization of L-glutaminase from marine bacteria. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Fazrina Mohamad, Salleh (2019) Ergonomic assessment of musculoskeletal symptoms and associated risk factors among pineapple plantation workers. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Hairunnisa, Kamarudin (2019) Modelling and optimisation of assembly line balancing problem with resource constraint. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Ab. Rashid).

Nur Hazirah Huda, Mohd Harun (2019) Physicochemical properties changes on Malaysia’s biomass torrefaction and development of torrefaction correlation model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Syahirah, Kamarudin (2019) Preparation of silver nanoparticles in aromatic leaves extract and ionic liquid for photodegradation of 2,4– dichlorophenoxyacetic acid. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Syazana, Muhamad Nasrah (2019) Biosynthesis of biobutanol from oil palm frond juice by Clostridium acetobutylicum. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Zahari, Mior Ahmad Khushairi).

Nuramira Fateha, Sukor (2019) Ultrasonic–probe assisted extraction of phenolic acids in ionic liquid from quercus infectoria galls. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurizzati, Md. Nizam (2019) Characterization and performance analysis of multi-stack vanadium redox flow battery. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamed, Mohd Rusllim).

Nurmaryam Aini, Hashim (2019) Optimisation and molecular dynamics simulation of mangiferin from mahkota dewa (Phaleria macrocarpa) extract in subcritical water extraction process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Parsia, Yasaman (2019) A procedure for minimization of nosocomial infections risk through upgrading and re-architecting of healthcare facilities. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhamad Tamyez, Puteri Fadzline).

Rabby, Gollam (2019) A tree based keyphrase extraction technique for academic literature. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md Saiful, Azad).

Rosshila, Idris (2019) Development of a port-stream based equation oriented modelling of dividing wall column using MOSAIC. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rozaida, Mohd Darus (2019) Organizational capabilities and the software project success in public sectors : process innovation as a mediator. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rubaiyi, Mat Zaid (2019) Study on the extraction of high methoxyl pectin from dragon fruit (hylocereus polyrhizus) peels and its adsorption performance againts cholesterol. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ruth, Alara Oluwaseun (2019) Optimizing microwave-assisted extraction of phenolic compounds, in vitro antioxidant and anti-diabetic activities of the extracts from bitter leaves (vernonia amygdalina) and purple fleabane (vernonia cinerea). PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sami, Waqas (2019) Statistical analysis of the nexus between dietary habits and practices with clinical outcome in Saudi patients with type 2 diabetes. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Selvamani, Sathish Kumar (2019) Mechanical behaviour of acrylonitrile butadiene styrene (ABS) specimen by fused deposition modelling (FDM). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, A/L Samykano).

Shamaileh, Abeer Moh'd Salem (2019) A new feature-based wavelet completed local ternary pattern (FEAT-WCLTP) for texture and medical image classification. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Taha Hussein, Rassem).

Shathiswara Rao, Subramaniam (2019) Influence of 3D printing parameters on mechanical behaviour of polylactic acid (PLA) specimen utilizing FDM technique. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Singh, Sharanjit (2019) Syngas production from methane reforming processes over boron promoted Ni/SBA-15 catalysts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Aishah, Safi (2019) Theoretical analysis on the wind power and pumped hydropower storage integrated flood mitigation system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Aishah, Wahid (2019) Optimization of magneto-rheological fluid in squeeze mode using combined d-optimal mixture design. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Aissah, Mad Ali (2019) Enhancement of software project performance by overcoming waste, volatility and constraints simultaneously. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Shahryar, Sorooshian).

Siti Norazimah, Mohamad Aziz (2019) Reverse micelle extraction of erythromycin with mixed surfactant anionic and zwitterionic. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Normunira, Ramli (2019) Development of flat sheet thin film composite nanofiltration membrane for separation of acetic acid inhibitor and sugar from biomass hydrolysate. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Roslindar, Yaziz (2019) Modified Box-Jenkins and GARCH for forecasting highly volatile time series data. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Roslinazairimah, Zakaria).

Suaidah Syazwani, Sulaiman (2019) A cash study of performance measurement method for single minute exchange of die (SMED) in metal stamping industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhamad Arifpin, Mansor).

Sufihana, Yusof (2019) Screening and identification of fungi associated with natural and artificially induced agarwood from aquilaria malaccensis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Suhaily, Suhaimi (2019) Synthesis of cyclodextrin (CD) using immobilized enzyme on hollow. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sultana, Umme Salma (2019) Exploring the combined effort of authentic leadership and psychological capital on job satisfaction mediated by job stress, in Bangladesh, pharmaceutical industry. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Syajaratul Jahriah, Hassan (2019) Investigation of thermodynamic properties of ascorbic acid crystal in different solvents using experimental and simulations methods. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Fatmawati, Adam).

Syazwani, Mohd Zokri (2019) Convective boundary layer flow of Jeffrey fluid and Jeffrey nanofluid over various geometry. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Salleh, Mohd Zuki).

Tan, Sze Pei (2019) Numerical study of crashworthiness on honeycomb filler subjected to impact loading. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Nadiah, Mohd Saffe).

Tengku Nur Anisa, Tengku Sallehuddin (2019) Silver nanoparticles embedded polyamide nanofiltration membrane for antimicrobial properties. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Uthayakumaran, Arulselvi (2019) The effect of tell me more (TMM) usability on students’ segmental and suprasegmental pronunciation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Mohd Nafis, Wan Lezaini (2019) Precision motion and energy exchange control on robot’s leg interaction with soft surface. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Nursyafiqah, Wan Jusoh (2019) Strength of soft clay reinforced with encapsulated bottom ASH columns. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Yousaf, Iftikhar (2019) Determining suitability of pro-and anti-cultural literary texts for a specific interpretive community using HRV Biofeedback at Taibah university. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Wahab, Muhammad Nubli).

Yousif, Yousif Atalla (2019) Optimal channel dimensions and temperature characteristics of SI-FinFET transistor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zaidi, Syeda Maria (2019) Flood forecasting using semi-distributed hydrological model coupled with weather research and forecasting model. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zulkifly, Mohammad @ Ab Aziz (2019) Influence on the structural optical and electrical properties of cuprous iodide complexes with tetramethylethylenediamine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).