Items where Year is 2012

'

'Imran, Ahmad Rosdi (2012) Design and investigate the manual sun tracking system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

A

A., Zulkiple and Sharifah, Awang (2012) Derivation of a Reliable and Consistent Volume Delay Functions for Town Road Network Based on Users Feedback. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 7-11. ISSN 2180-2742. (Published)

A. A., Jalil and S., Triwahyono and M. R., Yaakob and Z. Z. A., Azmi and N., Sapawe and N. H. N., Kamarudin and Setiabudi, H. D. and N. F., Jaafar and S. M., Sidik and S. H., Adam and B. H., Hameed (2012) Utilization of Bivalve Shell-Treated Zea mays L. (maize) Husk Leaf as a Low-Cost Biosorbent for Enhanced Adsorption of Malachite Green. Bioresource Technology, 120. pp. 218-224. ISSN 0960-8524. (Published)

A. K., Azad (2012) A Comprehensive Study of Di Diesel Engine Performance Withvegetable Oil: An Alternative Bio-Fuel Source of Energy. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 576-586. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

A. K. M., Moshiul Alam and Beg, M. D. H. and Prasad, D. M. Reddy and Khan, Maksudur R. and M. F., Fina (2012) Structures and Performances of Simultaneous Ultrasound and Alkali Treated Oil Palm Empty Fruit Bunch Fiber Reinforced Poly(lactic acid) Composites. Composites Part A: Applied Science and Manufacturing, 43 (11). pp. 1921-1929. ISSN 1359-835X. (Published)

Abd Jalil, Borham (2012) Manfaat hubungan IPTA-sekolah kluster. Berita Harian, (15 No . p. 15.

Abd Jalil, Borham (2012) Othmaniyyah Government Influence in Muslim Civil Laws in Malaysia : Reference to the Majalah Ahkam. In: Seminar Serantau Perbankan dan Kewangan Islam 2012 . . (Unpublished) (Unpublished)

Abd Jalil, Borham (2012) Tulisan Jawi: Tulisan Serantau. In: Seminar Jawi dan Teknologi Peringkat Kebangsaan 2012 , 18 Oct 2012 , Dewan Astaka, Universiti Malaysia Pahang. . (Unpublished) (Unpublished)

Abd Rahim, Ibrahim (2012) The survivors of low class contractor in construction industry related government contract with specific at Kelantan. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Abd Rahman, Safie (2012) UMP annual report 2012. Other. Penerbit Universiti Malaysia Pahang, Kuantan.

Abd Rahman Fahmi, Mat Hasan (2012) Analyze the inefficient takt time production and high customer complaint for support wheel carrier component to improve Lean production system level at Autokeen Sdn.Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Abdul Azim, Jais (2012) Study for detection of metallic contaminant in electrode of lithium-ion battery using a Hall probe. Masters thesis, Toyohashi University of Technology (Contributors, Thesis advisor: Ryoji, Inada).

Abdul Hadi, Abdul Ghani (2012) Food ordering system using IPad. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Abdul Hadi, Shamsul Kamar (2012) Design and development of motoraise grinding valve for motorcycle engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Kamil, Jamaludin (2012) Heart intelligence: 'Akinnah' intervention kit. Quest, 8 (5). p. 13. ISSN 1985-8159

Abdul Rahim, Mohamed (2012) Investigation of filler material to the corrosion behaviour of aluminium alloys weldment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Rahman, Hassan (2012) Synthesis and characterization of skinned-oriented asymmetric low pressure nanofiltration membrane. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdul Rashid, Muhammad (2012) Effects of tool path strategies on surface roughness in high speed milling. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Abdul Wahab, Abdul Aziz (2012) Tool wear on parallel turning of carbon steel bar. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Zarif, Abdul Malek (2012) Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdulbari, Hayder A. and R. M., Yunus and Nor' Aqilah, Norahzan (2012) A New Natural Drag Reducing Agent. In: IEEE Colloquium on Humanities, Science and Engineering (CHUSER 2012) , 3-4 December 2012 , Kota Kinabalu, Malaysia. pp. 631-636.. ISSN 978-1-4673-4617-7 (Published)

Abdulbari, Hayder A. and Siti Nuraffini, Kamarulizam and Nour, A. H. (2012) Grafted Natural Polymer as New Drag Reducing Agent: An Experimental Approach. Chemical Industry & Chemical Engineering Quarterly, 18 (3). pp. 361-371. (Published)

Abdulbari, Hayder A. and Siti Nuraffini, Kamarulizam and R. M., Yunus and Gupta, Arun (2012) Introducing Slag Powder as Drag Reduction Agent in Pipeline: An Experimental Approach. Scientific Research and Essay , 7 (18). pp. 1768-1776. ISSN 1992-2248. (Published)

Abdullah, Embong and Rohani, Abu Bakar and Syahrulanuar, Ngah (2012) Local Position Estimation Using an Artificial Neural Network Based Model with a Hardware Implementation. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 223-226.. (Published)

Abdullah, A. Mamun and Hans-Peter, Heim and Beg, M. D. H. and S. Kim, Tan and Sahrim, H. Ahmad (2012) PLA and PP Composites with Enzyme Modified Oil Palm Fibre: A Comparative Study. Composites Part A: Applied Science and Manufacturing, 53. pp. 160-167. ISSN 1359-835X. (Published)

Abdullah, Adam and R., Mamat and Nur Atiqah, Ramlan and Yoshiyuki, Kidoguchi and Azran, Zafri (2012) Analysis of Straight Vegetable Oil (SVO) Spray Characteristics at End of Injection (EOI). Journal of Medical and Bioengineering, 1 (1). pp. 59-62. ISSN 2301-3796. (Published)

Abdullah Munzir, Zul Safaruddin (2012) Design and fabricate a flexible toilet hose with spool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abu Bakar, Zulkiflli (2012) Determination of selected heavy metal in road dust along Gambang-Kuatan road. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Abu Hassan, Mohd Nazir (2012) Optimization of bacterial cellulose production in apple juice medium by using response surface methodology (RSM). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Abu Kashem Moshiul, Mohammad Alam (2012) Preparation and characterization of biodegradable poly lactid acid (PLA) composites with oil palm empty fruit bunch (EFB) fiber. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Achmad Fauzi, Abdul Wahab and Wan Mohd Nazmi, Wan Abdul Rahman and Zuraidah, Jauhari (2012) Utilization Waste Material as Stabilizer on Kuantan Clayey Soil Stabilization. In: Malaysian Technical Universities Conference on Engineering & Technology 2012 (MUCET 2012 ) , 20-21 Nov 2012 , Hotel Seri Malaysia, Kangar Perlis. pp. 389-392.. (Published)

Adam Mohd Izhan, Noor Azam (2012) A comparison study of liquid and vapor phase development at spray boundary of diesel spray, BDF and SVO spray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Addie Irawan, Hashim (2012) Force and impedance control for hydraulically driven hexapod robot walking on uneven terrain. PhD thesis, Chiba University (Contributors, UNSPECIFIED: UNSPECIFIED).

Addie Irawan, Hashim and Nonami, Kenzo (2012) Force threshold-based omni-directional movement for hexapod robot walking on uneven terrain. In: IEEE 4th International Conference on Computational Intelligence, Modelling and Simulation (CIMSim 2012) , 25-27 September 2012 , Kuantan, Pahang Darul Makmur. pp. 127-132.. ISBN 978-1-4673-3113-5 (Published)

Addy Firdaus, Omar (2012) Investigation of mechanical properties of welded aluminium alloys. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adeebah, Jamar (2012) Chemical identification based on spectrogram. Faculty of Electrical and Electronic Engineering, Universiti Malaysia Pahang.

Adham, Ali A. J. and Razman, Mat Tahar (2012) Enhancing efficiency of automobile assembly line using the Fuzzy logical and Multi-objective Genetic Algorithm. In: IEEE International Conference on Fuzzy Systems (FUZZ 2012) , 10-15 June 2012 , Brisbane, QLD, Australia. pp. 1-7.. ISBN 978-1-4673-1506-7 (Published)

Adnor Alhaimi, Adam (2012) Antioxidant Activity Of Ethanolic Extract Of Some Malaysian Herbs. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aeyzarq Muhammad Hadzreel, Mohd Razali (2012) Effects of alignment of reinforcement material to the properties of Polymer Matrix Composite (PMC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Afham Bazli, Razali (2012) A study of acoustic emission testing on galvanized iron MIG welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Afidatun Najwa, Mohd Sani (2012) Study the impact of coupling agent and fiber length on wood plastic composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Afiq, Lamaznun (2012) Network analysis and design at Teruntum Complex. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Afzan, Ahmad (2012) School Fees Payment Accounting Management System. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Ahmad, Othman and Safaria, Triantoro and Muhammad Nubli, Abdul Wahab (2012) Gender, Academic Rank, Employment Status, University Type and Job Stress among University Academic Staffs in Pahang, Malaysia and Jogjakarta, Indonesia Context. International Journal of Technology Management, 1. pp. 57-70. ISSN 2289-2753. (Published)

Ahmad, Salman and Razman, Mat Tahar (2012) Long-term Electricity Forecasting: A System Dynamics Approach. In: International Conference on Environment, Energy and Biotechnology , 5-6 May 2012 , Kuala Lumpur, Malaysia. . (Published)

Ahmad, Ibrahim (2012) CLIC: a pogram on cultivating true leadership. Ilham, 9 . p. 12. ISSN 1985-157X

Ahmad, Ibrahim (2012) CMLHS luncheon at Bukit Gambang Resort. Ilham, 9 . pp. 13-15. ISSN 1985-157X

Ahmad, Ibrahim (2012) Deputy Minister of Higher Education visit to MLCC. Ilham, 9 . p. 4. ISSN 1985-157X

Ahmad, Ibrahim (2012) Industrial soft skills seminars. Ilham, 9 . p. 20. ISSN 1985-157X

Ahmad, Ibrahim (2012) Partial Square (PLS) Approach Workshop. Ilham, 9 . p. 9. ISSN 1985-157X

Ahmad, Ibrahim (2012) Research Workshop for Research Grant. Ilham, 9 . p. 9. ISSN 1985-157X

Ahmad, Ibrahim (2012) Tazkirah ramadhan series. Ilham, 9 . p. 16. ISSN 1985-157X

Ahmad, Ibrahim (2012) Workshop on Ethnic Relations and TITAS measurement. Ilham, 9 . p. 16. ISSN 1985-157X

Ahmad, Ibrahim (2012) A seminar on ethnics relation. Ilham, 9 . p. 20. ISSN 1985-157X

Ahmad, Ibrahim and Hafizoah, Kassim (2012) CMLHS researchers shine at CITREX 2012. Ilham, 9 . p. 1. ISSN 1985-157X

Ahmad, Ibrahim and Mohd Firdaus, Mohd Kamaruzaman (2012) Research Colloquium. Ilham, 9 . p. 10. ISSN 1985-157X

Ahmad, Othman (2012) A study on the management system in the healthcare sector using service quality concept. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad, Othman and Ibrahim, Daing Nasir and Noor Azlinna, Azizan and Mustafa, Shariman and Hassan, Hasahudin and Majjah Mazita, Mokhtar and Azit, Azizan and Ghani, Airin Abdul and Ida Rizyani, Tahir and Syamimi Errymy, Sawal (2012) A study on the management system in the healthcare sector using service quality concept. , [Research Report] (Unpublished)

Ahmad Affendi, Hashim and Mazlina, Abdul Majid (2012) Guidelines and Assessment Tool for Making Web Text Legible on Full High Definition Display. In: Proceedings of the First International Conference on Computational Science and Information Management (ICoCSIM2012) , 3-5 December 2012 , Toba Lake, North Sumatra, Indonesia. pp. 55-58., 1. ISBN 978-967-0120-60-7 (Published)

Ahmad Afif, Mohd Faudzi (2012) Acquisition of context-based word recognition by reinforcement learning using a recurrent neural network. Masters thesis, Oita University (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Afif, Mohd Faudzi (2012) Acquisition of context-based word recognition by reinforcement learning using a recurrent neural network. Department of Electrical and Electronics Engineering, Oita University.

Ahmad Aiman, Ramlan (2012) Experimental and finite element evaluation of bending for mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Azril, Azmi (2012) Thermodynamic analysis for a six stroke engine for heat recovery. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Azril, Azmi (2012) Thermodynamic analysis for a six stroke engine for heat recovery. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Danial, Abdullah (2012) Mechanical properties of dissimilar aluminum-based alloy joints by mig welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Faiz, Nasir (2012) Analysis the performance of signalized intersection by using sidra. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Fatihy, Mohd Subbri (2012) Development of autogrease electric motor’s bearing system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Fazullah, Mohd Zainal Abidin and Imaduddin, Abidin and Jamal Rizal, Razali and Razak, Munira Abdul and Husna, Hashim and Ngah, Ezihaslinda and Ghani, Airin Abdul (2012) A case study on turnover of operational staff at multinational company in Kuantan, Pahang and its effect to the productivity = kajian kepuasan kerja dan komitmen organisasi serta kesannya terhadap kecenderungan / niat berhenti kerja di kalangan staf bahagian operasi syarikat multinasional di Kuantan, Pahang. , [Research Report] (Unpublished)

Ahmad Firdaus, Mohd (2012) The effects of process parameters on concentration of dragon fruit juices via freeze concentration technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmad Kamal, Mat Zain (2012) Clinic management system with notification using GSM modem. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad Muhaimin, Ismail (2012) Design and analysis of wheelchair in term of daily usage. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Muizz, Ishak (2012) Study of effects of fuel injection pressure on performance for diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Nasrullah, Norazaman (2012) Analysis on the behaviour of the transient response in turbocharger diesel engine by using simulation / Ahmad Nasrullah Norazaman. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Nor Kasruddin, Nasir and Normaniha, Abd Ghani and Mohd Ashraf, Ahmad (2012) A Novel Hybrid Spiral Dynamics Bacterial Chemotaxis Algorithm for Global Optimization with Application to Controller Design. In: UKACC International Conference on Control 2012 , 3-5 September 2012 , Cardiff, UK. pp. 753-758.. (Published)

Ahmad Nor Kasruddin, Nasir and Normaniha, Abd Ghani and Mohd Ashraf, Ahmad (2012) A Novel Hybrid Spiral-Dynamics Bacterial-Foraging Algorithm for Global Optimization with Application to Control Design. In: Workshop on Computational Intelligence (UKCI), 2012 12th UK , 5-7 September 2012 , Edinburgh, United Kingdom. pp. 1-7.. (Published)

Ahmad Nor Kasruddin, Nasir and Tokhi, M. O. and Nur Maniha, Abd Ghani and Raja Mohd Taufika, Raja Ismail (2012) Novel Adaptive Spiral Dynamics Algorithms for Global Optimization. In: Proceedings of 11th IEEE Conference on Cybernetic Intelligence Systems 2012 , 23 – 24 August 2012 , Limerick, Ireland. pp. 99-104.. (Published)

Ahmad Nor Kasruddin, Nasir and Mohd Zaidi, Mohd Tumari and Mohd Riduwan, Ghazali (2012) Performance comparison between Sliding Mode Controller SMC and Proportional-Integral-Derivative PID controller for a highly nonlinear two-wheeled balancing robot. In: International Conference on Soft Computing and Intelligent Systems , 20-24 November 2012 , Kobe, Japan. pp. 1403-1408.. ISBN 978-146732742-8 (Published)

Ahmad Rasdan, Ismail and Karagaratnana, Shashi Kumar S. A. and Rozli, Zulkifli and Baba, M. Deros and Mohd Nizam A., Rahman (2012) A review on thermal comfort assessment in Malaysian industries. Jurnal Teknologi (Sciences and Engineering), 59 (2). pp. 7-11. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Ahmad Redza, Ahmad Mokhtar (2012) Deposition of high hardness coating by low power atmospheric pressure microwave plasma spray and the characteristics evaluations. Masters thesis, Toyohashi University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Safwan, Abdul Halim (2012) The kinetic study of biodiesel production by using two step method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmad Saifudin, Mohd Kamel (2012) Research Acculturation Grant Scheme (RAGS). Quest, 8 (5). p. 7. ISSN 1985-8159

Ahmad Shahrul Amrie, Mohd Supri (2012) The study on the effect of laser power on kerf width for carbon dioxide laser cutting process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Shawal, Mohd Amin (2012) Design and fabrication of pesticide pump sprayer cart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syahiman, Mohd Shah (2012) Pattern layout optimization for low series resistance and capacitance in gan schottky barrier diodes. Masters thesis, University of Fukui (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Syauqi Fathuddin, Md Shaimi (2012) Study on crack interaction effect of API steel using finite element analysis. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ahmad Syazwan, Mohammad (2012) The effect of compaction pressure and sintering time on mechanical properties of a waste metal powder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syazwan, Yahya (2012) Effect of heat treatment on erosion-corrosion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Wafi Zaim, Kharudin (2012) Non revenue water (NRW) Sg. Lembing experienced. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Zaki, Zaimani (2012) Development hydrogen gas generator for dual fuel engine using yull brown method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Ziad, Sulaiman (2012) 66 anggota sertai Kursus Asas Perajurit Muda. CREATE . p. 42. ISSN 1823-7487

Ahmed Nizam, Thulkarunai (2012) Production of conductive polymer using carbon nanotube. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmmad Shukrie, Md Yudin (2012) Studies on the residence time distribution of solids in a swirling fluidized bed. Masters thesis, Universiti Teknologi Petronas (Contributors, UNSPECIFIED: UNSPECIFIED).

Aida Raihana, Abd Wahab (2012) Human diseases diagnosis system (HDDS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Aida Shafina, Shofi (2012) Sound identification in the swiftlet house. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Aida Syamsiah, Mohd Yusof (2012) Investigation of heat treatment on weld joint of steel and aluminum. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aiesyah, Ghazali (2012) Battery level monitoring system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Aimuni Izzati, Mohammad Yatim (2012) Separation of oil and water by using coconut coir. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Aina Azliyana, Mohamad (2012) Simulation of auto –tuning pid controller for dc motor using Ziegler-Nichols method. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ainatul Shahirah, Mohd Saru (2012) A study on causes of flood at Sungai Isap and Jalan Tun Ismail, Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Aini Rushda, Md Desa (2012) Effects of cutting tool coating on surface roughness in machining pre-hardened steel (p20). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ainihayati, Ismail (2012) Mathematical modeling of adsorption for wastewater treatment. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ainol Haryati, Ibrahim (2012) Podcasting as a tool in the development of public speaking skills. PhD thesis, International Islamic University Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Ainol Haryati, Ibrahim and Zailin Shah, Yusoff (2012) Teaching Public Speaking in a Blended Learning Environment. International Journal of Social Science and Humanity, 2 (6). pp. 573-576. ISSN 2010-3646. (Published)

Airina, Zubir (2012) Removal of acrylic acid from process water using continuous adsorption. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Akmal Hakim, Muhammad Sha'ani (2012) Compressive strength of lightweight foamed concrete using artificial aggregate from palm oil clinker. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Akorede, Mudathir Funsho (2012) Enhancing The Solar Energy Potential in Malaysia Using The Concentrated Photovoltaic (CPV) Technology. In: Planet Under Pressure 2012 Conferences , 26 – 29 March 2012 , International Convention Centre (ICC) London, UK. . (Published)

Al-Muhandisah, . (2012) Kejuruteraan Kimia di dalam Al-Quran. CREATE . pp. 48-49. ISSN 1823-7487

Al-Shaquerin, Katman (2012) Performance of IBS lightweight cold-formed steel roof truss. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Ali, Eman N. and Suleyman, A. Muyibi and Md Zahangir, Alam and Hamzah, M. Salleh (2012) Optimization of Water Treatment Parameters using Processed Moringa oleifera As a Natural Coagulant for Low Turbidity Water. In: 2012 International Conference on Statistics in Science, Business and Engineering (ICSSBE2012) , 10-12 September 2012 , Langkawi, Kedah. . (Published)

Ali, A. J. Adham (2012) An integrated model for production line balancing planning. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ali, A. J. Adham and Razman, Mat Tahar (2012) Optimum Efficiency of the Production Line at the Automotive Industry. International Journal of Technology Management, 1. pp. 89-102. ISSN 2289-2753. (Published)

Ali, Eman N. (2012) Moringa Oleifera Miracle Tree For Green Technology: A Review. In: International Conference on Green Technology (ICGTE 2012) , 28-30 May 2012 , Universiti of TUZLA, Bosnia. pp. 1-12.. (Published)

Ali Asghar, Jomah Adham and Razman, Mat Tahar (2012) A simulation study of a new rate-and-queue-based active queue management algorithm. Journal of Modelling in Management, 7 (3). pp. 274-286. ISSN 1746-5664. (Published)

Aliaa Diyana, Abdul Hisham (2012) Determination of stevioside and rebaudioside a in Stevia rebaudiana leaves via preparative HPLC. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Alisandra Arieza Fou, Muhd Farid Fou (2012) Surface roughness in lathe boring operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amalina, M. N. and Ayib Rosdi, Zainun and N. A., Rasheid and Rusop, M. (2012) The Electrical Conductivity of Copper (I) iodide (CuI) Thin Films Prepared by Mister Atomizer. In: 10th IEEE International Conference on Semiconductor Electronics (ICSE 2012) , 19-21 September 2012 , Kuala Lumpur, Malaysia. pp. 128-131.. ISBN 978-1-4673-2394-9 (Published)

Amatul, Zehra and Tuty Asmawaty, Abdul Kadir and Sabira, Khatun (2012) The Long-Term Prediction of Type II Diabetes Mellitus: A Review Study. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 140-146.. (Published)

Amin Luddin, Adnan (2012) Soft Set Theory for Data Reduction. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Amir, Al-Falahi and Yusoff, M. Z. and Diyar, I. Ahmed (2012) An Experimental Evaluation of Transient Flows in a Supersonic Gun Tunnel. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 701-712. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Amir, Abdul Razak (2012) Library Structure of Dynamic Simulation for Combined Heat and Power Plant in Modelica Language. Applied Mechanics and Materials, 110 (111). pp. 4925-4931. ISSN 1662-7482. (Published)

Amir, Aziz and R., Mamat and Amin, Makeen and Wan Khairuddin, Wan Ali (2012) Effect of propellant composition to the temperature sensitivity of composite propellant. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-7., 36 (012023). ISSN 1757-899X (Published)

Amir Asri, Mohd Al Kharid (2012) Design and development of semi automatic canting tool (Electrical). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Amir Fadli, Abu Bakar (2012) A potential of using palm oil solid waste by-product (palm oil clinker and oil palm shell) as partial aggregate replacement. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Amir Rahimie, Ridzuan (2012) Adsorption of methylene blue using activated carbon from mixed of palm oil press fibres and empty fruit bunch. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Amira, Mustapa (2012) A design methodology for a self-oscillating electronic ballast. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Amirah and Reddy Prasad, D. M. and Khan, Maksudur R. (2012) Comparison of extraction techniques on extraction of gallic acid from stem bark of Jatropha curcas. Journal of Applied Sciences, 12 (11). pp. 1106-1111. ISSN 1812-5654. (Published)

Amirah, Mohd (2012) Sungai Isap secondary school management website. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Amirah, Izam (2012) Solid-liquid extraction of hydrolysable tannin (galic acid) from stem bark of Jatropha Curcas using various type of extraction. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: D.M. Reddy, Prasad).

Amirah Afiqah, Ahmed (2012) Smart sun tracking with automated cleaning system for PV modules. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Amirul, Ramlan (2012) Design and analysis of three wheel prototype car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Azfar, Elias (2012) Optimization and performance analysis of a portable solar cooker system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Edham, Roslee (2012) Synthesis, characterization and catalytic activity of palladium supported on bleaching clay. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Amrina, Abu Bakar (2012) Projection on pavement life time for FR 222 access road to Gambang toll. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Anas, Mohd Naim (2012) Synthesis and characterization of Co/SBA-15 catalysts for Fischer-Tropsch synthesis. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Andrew, Yau-hau Tse (2012) Glossophobia of University Students in Malaysia. International Journal of Asian Social Science, 2 (11). pp. 2061-2073. ISSN 2226-5139. (Published)

Andrew, Yau-hau Tse (2012) Impacts of Short Message Service Texting on University Students in Malaysia. Asian Social Science, 8 (1). pp. 107-110. ISSN 1911-2017. (Published)

Andrew, Yau-hau Tse (2012) Language Learning Strategies of Hong Kong And Malaysian Students. In: Prague International Conference 2012 , 26-29 June 2012 , Euro-American University, Prague, Czech Republic. . (Unpublished) (Unpublished)

Andrew, Yau-hau Tse (2012) Using Songs in an English Language Teaching Classroom. In: 21st MELTA International Conference , 7-8 June 2012 , Four Points Hotel, Kuching, Malaysia. . (Unpublished) (Unpublished)

Ang, Tzy Guan (2012) Online product selection system of REH Trading. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Anis Farhana, Mohd Roslan (2012) Motor control-speed. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Anthony, Latisha (2012) Modification of nanofiller to improve the final properties of polylactic acid(PLA)nanocomposites. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Anuar, Abd. Aziz (2012) Bendera UMP berkibar di puncak Gunung Kinabalu. CREATE . pp. 8-9. ISSN 1823-7487

Anwar, P. P. A. Majeed and David, N. V. and S., Khairiyah (2012) Elastic And Dynamic Response Characteristics Of Kenaf/polypropylene Composites. In: High Performance Structures and Materials VI. WIT Transactions on The Built Environment, 124 . WIT Press, pp. 395-404. ISBN 978-1-84564-596-0 (print); 978-1-84564-597-7 (online)

Anwar, Ahmad and Ghufran, Rumana and Zularisam, A. W. (2012) Effect of cod loading rate on an upflow anaerobic sludge blanket reactor during anaerobic digestion of palm oil mill effluent with butyrate. Journal of Environmental Engineering and Landscape Management, 20 (4). pp. 256-264. ISSN 1648-6897. (Published)

Anwari, M. and Muhammad Ikram, Mohd Rashid and A. R. M., Ali (2012) An evaluation of hybrid wind/diesel energy potential in Pemanggil Island Malaysia. In: International Conference on Power Engineering and Renewable Energy (ICPERE 2012) , 3-5 July 2012 , Bali, Indonesia. pp. 1-5.. (Published)

Anwaruddin, Hisyam (2012) Design and operation of multivessel batch distillation. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Mohd Yunus).

Ardiansyah, Soleh and Mazlina, Abdul Majid and Jasni, Mohamad Zain (2012) Foreign Exchange Forecasting by using Artificial Neural Networks: A Survey of Literature. In: Proceeding National Conference for Postgraduate Research (NCON-PGR 2012) , 8-9 September 2012 , Universiti Malaysia Pahang. pp. 1-5.. (Published)

Ardiansyah, Soleh and Mazlina, Abdul Majid and Jasni, Mohamad Zain (2012) Hybrid Neural Network and Decision Tree for for Exchange Rates Forecasting. In: Proceedings of the First International Conference on Computational Science and Information Management (ICoCSIM2012) , 3-5 December 2012 , Toba Lake, North Sumatra, Indonesia. pp. 29-35., 1. ISBN 978-967-0120-60-7 (Published)

Arjianah, Aliamat (2012) Study on comparison of bio-cocosand filter and biosand filter for drinking water treatment in rural area. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Arkan Jasim, Hadi and Ghazi Faisal, Najmuldeen and Iqbal, Ahmed (2012) Polyolefins Waste Materials Reconditioning Using Dissolution/Reprecipitation Method. APCBEE Procedia, 3. pp. 281-286. (Published)

Arkan Jasim, Hadi and Najmuldeen, Ghazi Faisal and Kamal, Yusoh (2012) Recycling of polyolefins waste materials by dissolution/reprecipitation technique using an organic solvent. Energy Education Science and Technology Part A: Energy Science and Research, 30 (2). pp. 989-1004. ISSN 1308-772X. (Published)

Arulselvi, Uthayakumaran and Normah, Othman (2012) The Possible University-Industry Partnership between DRB-HICOM and University Malaysia Pahang. American Journal of Economics (Sp.). pp. 26-28. ISSN 2166-4951 (Print); 2166-496X (Online). (Published)

Arwa, Mukhtar and Awanis, Romli and Noorhuzaimi@Karimah, Mohd Noor and Mansoor, Abdullateef and Al-Bashiri, Hael (2012) Inventory visibility scenario to reduce safety stock in supply chain network using blockchain hyperledger composer. In: The International Conference on Software Engineering & Computer Systems , 24-26 August 2012 , Faculty of Computer Systems & Software Engineering , Universiti Malaysia Pahang.26600 Pekan , Pahang , Malaysia. pp. 1-6.. (Published)

Asdarina, Yahya (2012) UMP owns 180-acre of land. Quest, 8 (5). p. 3. ISSN 1985-8159

Asfidayu, Abdul Ghani (2012) Sustainable parking management strategy for Sultan Ahmad Shah Mosque, Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

At-Tasneem, Mohd Amin (2012) A study on the applicability of symbolic computation in stabilising control design for switched systems. Masters thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

At-Tasneem, Mohd Amin and Sallehuddin, Mohamed Haris and Zulkifli, Mohd Nopiah (2012) Stability of a Switched Linear System. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 320-330. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Atiqah, Nafsun (2012) Biodiesel from various vegetables and tallow oils. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Auji, Samsudin (2012) Design and fabrication of a single cylinder diesel engine test platform and it's experimental equipment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ayesha, Darawin (2012) Recovery of spent IPA by using evaporation process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ayesha, Darawin (2012) Recovery of spent IPA by using evaporation process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ayib Rosdi, Zainun and Sakamoto, Tomoya and Uzer, Mohd Noor and Mohamad, Rusop and Ichimura, Masaya (2012) New Approach for Generating Cu2O/TiO2 Composite Films for Solar Cell Applications. Materials Letters, 66. pp. 254-256. ISSN 0167-577X. (Published)

Ayib Rosdi, Zainun (2012) Characterization of tmed-copper (I) iodide (Cul) thin film and performance for solid state dye sensitized solar cell applications. PhD thesis, Universiti Teknologi Mara (Contributors, Thesis advisor: Mohamad Rusop, Mahmood).

Ayu Annur Fetrah, Yusoff (2012) Microcontroller based Delta Modulated PMW for three phase inverter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Azeddien, Kinsheel and Zahari, Taha and Abdelhakim, Deboucha and Tuan Mohammad Yusoff, Tuan Ya (2012) Robust Least Square Estimation Of The CRS A465 Robot Arm's Dynamic Model Parameters. Journal of Mechanical Engineering Research, 4 (3). pp. 89-99. ISSN 2141-2383. (Published)

Azhani, Zukri (2012) Pekan Soft Clay Treated With Hydrated Lime As A Method Of Soil Stabilizer. Procedia Engineering, 53. pp. 37-41. ISSN 1877-7058. (Published)

Azhari, H. Nour and Nour, A. H. and M. M., Yusoff and Jessinta, D/O Sandanasamy (2012) Bioactive Compounds from Basil (Ocimumbasilicum) Essential Oils with Larvicidal Activity against Aedesaegypti Larvae. In: 3rd International Conference on Biology, Environment and Chemistry , 24-25 November 2012 , Bangkok, Thailand. . (Published)

Azhari, H. Nour and Sandanasamy, Jessinta and M. M., Yusoff (2012) Antibacterial Activity of Different Extracts of Swietenia Macrophylla King. In: 13th Medicinal and Aromatic Plants Seminar 2012 (MAPS2012) , 25-26 September 2012 , Hotel Sunway Putra, Kuala Lumpur. . (Published)

Azimah, Hazeli (2012) Evaluation of small steel fiber for enhancing reinforced concrete flexural characteristics. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Azira, Yacob (2012) Kindergarden management system for Taska Anakku Comel UMP. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Azizul Helmi, Sofian and Noda, Kazuhiko (2012) Evaluation of zinc rich paint (ZRP) efficiency on mild steel in seashore environment. ECS Transactions, 50 (50). pp. 29-36. ISSN 1938-6737. (Published)

Azlina, Mohd Ariffin (2012) A visit to Instituto Cervantes. Ilham, 9 . p. 21. ISSN 1985-157X

Azlina, Zainuddin (2012) FSKKP jalin hubungan baik dengan syarikat peneraju industri komputer dan perisian. CREATE . p. 21. ISSN 1823-7487

Azma Salwani, Ab Aziz (2012) Optimization of abrasive machining of ductile cast iron using water based SiO2 nanocoolant : a radial basis function. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azrulhafiq, Mohd Azizi (2012) Experimental and analytical evaluation of bending for mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azwan Bukhari, Asmil (2012) The effect of coconut fibre on concrete properties (workability and flexural strength). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Azyyati, Johari (2012) An approach to market biofuel from waste castor bean shell. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: GHAZI FAISAL, NAJMULDEEN).

B

B., Ghobadian and P., Nematizade and G., Najafi (2012) Investigation of Fossil Fuel and Liquid Biofuel Blend Properties Using Artificial Neural Network. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 639-647. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

B. M., Deros and M. F. M., Ali and A., Ismail (2012) Bio-mechanics analysis of instep kicking among Malaysian football players. In: IEEE 2nd International Conference of Southeast Asian Network of Ergonomics Societies (SEANES 2012) , 9-12 July 2012 , Langkawi, Kedah. pp. 1-5. (12997653). ISBN 978-146731734-4 (Published)

B.B, Sahari and M.M, Shahzamanian and M, Bayat and Z.N, Ismarrubie and F, Mustapha (2012) Comparison of Thermoelastic Results in Two Types of Functionally Graded Brake Discs. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 660-669. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

Badshah, Gran and Liew, Siau-Chuin and Jasni, Mohamad Zain and Herawan, Tutut (2012) Tamper Localization and Recovery Medical Image Watermarking: A Review. In: Proceedings of the First International Conference on Computational Science and Information Management (ICoCSIM2012) , 3-5 December 2012 , Toba Lake, North Sumatra, Indonesia. pp. 267-270., 1. ISBN 978-967-0120-60-7 (Published)

Bagavathi, Krishnan (2012) Investigation of alumina additive in lubricant oil for enhanced engine performance. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Balkish, Muhammad Ali (2012) The performance of palm oil boiler stones (POBS) and quarry dust as partially sand replacement in mortar. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Bangga, Christabel Melanie (2012) Fabrication and comparison between poymeric membrane with mixed matrix membrane on their prformance for O2/N2 separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Bee Tin, Chew (2012) Kinetic evaluation of sewage sludge treatment by membrane anaerobic system (MAS). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Benedict, Maurice Lojikip (2012) One dimensional simulation of diesel hydrogen dual fuel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Bibi Rubiatul Adawiah, Mustafa Kamal (2012) Simulation on air conditioning using fuzzy logic. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Bindamin, Benjunior (2012) Effect of precipitate hardening treatment on microstructure and mechanical properties of cast aluminum silicon alloy (A356). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Budi, Wiyarno (2012) A study on the ultrasonic oil extraction and in situ transestrification of microalgae biodiesel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Mohd Yunus).

Budianto, A. and Kamarul Baharin, Tawi and M., Hussein and Supriyo, Bambang and Ariyono, S. and M. S., Che Kob and Mohd Ezlamy, Zulkifli and Khairuldean, A. K. and Aishah, Daraoh (2012) Microcontroller based proportional derivative plus conditional integral controller for electro-mechanical dual acting pulley continuously variable transmission ratio control. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-14., 36 (1). ISSN 1757-899X (Published)

C

C. K. M., Faizal and Shareena, Mohd Sharif (2012) Bisphenol A MIP Fabrication using the Application of Factorial Design Analysis. In: International Conference on Nanotechnology 2012 , 30 May-1 June 2012 , Kuala Lumpur. pp. 1-12.. (Published)

C. K. M., Faizal and Shareena, Mohd Sharif (2012) Influence of Factorial Design Analysis on the Performance of Bisphenol A Molecular Imprinted Polymer. International Journal of Chemical and Environmental Engineering, 3 (2). pp. 147-151. ISSN 2078-0737. (Published)

Cadence Isis, Tay (2012) Characteristics of Biodiesel Produced From Palm Oil via Base Catalyzed Transesterification. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Cek Seng, Koh (2012) Line balancing technique implementation in a small and medium industry. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chai, Yee Toong (2012) Hospital management system on mainframe. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chan, Chia Yik (2012) Vehicle tracking and speed estimation system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chan, Hong Lup (2012) Sub-surface constructed wetlands for pesticides removal by using vetiver grasses. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Charan Kanwal, Chitra Charan Suri (2012) Biodiesel production from rubber seed oil using activated clinker as catalyst. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Che Amri, Che Azmi (2012) Compressed concrete block using crushed laterite brick as sand substitution. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Che Hanisah, Yaacob (2012) Analysis of emulsion fuel spray characteristics using SAC and VCO nozzle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Che Ku Aili Nurfateen, Che Ku Ahmad (2012) Assessing flow accumulation area of Sungai Kuantan watershed using GIS techniques. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Che Muhammad Ridhwan, Che Hashim (2012) Design, detail analysis and performance testing of uav propulsion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Che Norrizuan, Che Abdul Rahim (2012) Esterification of oleic acid with ethanol catalysed by 12-tungstophosphoric acid supported on alumina. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Chen Sing, Winnie Lo (2012) Evaluation of effectiveness parameters on gas dehydration plant. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Cheng, C. K. and Jolius, Gimbun and Chin, S. Y. (2012) Influence of Promoter Type on Bimetallic Co-Ni/Al 2O3 Catalyst for Steam Reforming of Glycerol. In: 6th International Conference on Environmental Catalysis (ICEC 2012) , 12-15 September 2010 , Beijing, China. pp. 264-265.. (Published)

Cheng, C. K. and Lim, Rwi Hau and Anabil, Ubil and Chin, S. Y. and Jolius, Gimbun (2012) Hydrogen as Carbon Gasifying Agent During Glycerol Steam Reforming over Bimetallic Co-Ni Catalyst. Advances in Materials Physics and Chemistry, 2 (4). pp. 165-168. ISSN 2162-531X (print); 2162-5328 (online). (Published)

Cheng, Kam Hao (2012) Failure assessment : comparison of the failure mode between OPC mic and fiber mix concrete slab. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Cheok, Chin Loong (2012) California Bearing Ratio (CBR) improvement of Kuantan clay subgrade using glass waste as stabilizer. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Cheong Lee, Ho and Tutut, Herawan and Noraziah, Ahmad (2012) Evolutionary Grammars Based Design Framework For Product Innovation. Procedia Technology, 1. pp. 132-136. ISSN 2212-0173 . (Published)

Chew, Few Ne and Tan, Siang Wen and Boo, Chern Huey and Tey, Ti Beng (2012) Statistical Optimization of Green Fluorescent Protein Production from Escherichia coli BL21(DE3). Preparative Biochemistry and Biotechnology, 42 (6). pp. 535-550. ISSN 1082-6068. (Published)

Chew, Jun Jian (2012) Comparison of microwave-assisted chemicals in demulsification of water-in-crude oil emulsions. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Chew Fern, Tan (2012) Characterization, demulsification and transportation of heavy crude oil via oil-in-water (o/w) emulsion. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Chin, Pooi Ling (2012) Knowledge management system of coconut. Faculty of Computer Systems & Software Engineering , Universiti Malaysia Pahang.

Chin Hui, Ong (2012) RFID marathon timing system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ching, Wai Hoong (2012) Development of straight line robot movement. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Chong, Ah Kow (2012) 2 in 1 to begin 2012. Ilham, 9 . p. 4. ISSN 1985-157X

Chong, Ah Kow (2012) Chinese practical arts. Ilham, 9 . p. 21. ISSN 1985-157X

Chong, Ah Kow (2012) Fun at smart partnership program. Ilham, 9 . p. 11. ISSN 1985-157X

Chong, Soon Woei (2012) Emergency beacon for elderly. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Chowdhury, M. N. K. and Beg, M. D. H. and Khan, Maksudur R. and Mina, M. F. (2012) Synthesis of Copper Nanoparticles and Their Antimicrobial Performances in Natural Fibres. Materials Letters, 98. pp. 26-29. ISSN 0167-577X. (Published)

Chowdhury, M. N. K. and M. W., Khan and M. F., Fina and Beg, M. D. H. and Khan, Maksudur R. and A. K. M., Moshiul Alam (2012) Synthesis and Characterization of Radiation Grafted Films for Removal of Arsenic and Some Heavy Metals from Contaminated Water. Radiation Physics and Chemistry, 81 (10). pp. 1606-1611. ISSN 0969-806X. (Published)

Chui Teng, Chan (2012) Simulation of identifying shortest path walkway in library by using ant colony optimization. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chun Ling, Lu (2012) Job agent management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Cornelia, Chin Siew Ling (2012) Isolation and purification of pinellic acid from Pinellia Ternata. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

D

D., Ramasamy and Khoo, Aik Soon and Z. A., Zainal and Briggs, Horizon Walker-Gitano (2012) Variation of Air Flow Pattern Through Dissimilar Valve Lift In A Spark Ignition Engine. Journal of the Chinese Institute of Engineers, 36 (8). pp. 1-14. ISSN 0253–3839 (print); 2158–7299 (online). (Published)

Daelami, Aminuddin (2012) Development of mini micro injection moulding machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Daeng Mohd Ashik, Bachok (2012) Dye removal by thin film composite (TFC) membrane produced through interfacial polymerization technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Dayang Khairunnisa, Abang Kiprawi (2012) Biomechanical loading of instep kick for malaysian footballer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Desmond Chong Shin, Koh (2012) Transport scheduling system in SUK Pahang using heuristic method. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Devandran, Krisnan (2012) Development of fuzzy controller to control vehicle temperature. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Dheng Siew, Keah (2012) Meal electronic payment system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Diana Surya, Abd Wahab (2012) MPP baru angkat sumpah. Sinar Harian .

Dinish, Thegaraju (2012) Investigation of biodiesel fuel properties with the dispersion of carbon nanotubes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

E

Ebrahim, Nader Ale and Shamsuddin, Ahmed and Salwa Hanim, Abdul-Rashid and Zahari, Taha (2012) Effective Virtual Teams for New Product Development. Scientific Research and Essay , 7 (21). pp. 1971-1985. ISSN 1992-2248. (Published)

Edwin Hanjiang, Chan (2012) Design of a working model hovercraft. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ee Shuang, Lau (2012) Implementation of 7 QC tools by using Kaizen approach for SME manufacturing industry. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Elumalai, Naveen Kumar and Rajan, Jose and Archana, Panikar Sathyaseelan and Chellappan, Vijila and Ramakrishna, Seeram (2012) Charge Transport through Electrospun SnO2 Nanoflowers and Nanofibers: Role of Surface Trap Density on Electron Transport Dynamics. The Journal of Physical Chemistry C. pp. 22112-22120. (Published)

Elumalai, Naveen Kumar and Rajan, Jose and Archana, Panikar Sathyaseelan and Chellappan, Vijila and Ramakrishna, Seeram (2012) Charge transport through Electrospun SnO2 Nanoflowers and Nanofibers: Role of surface trap density on electron transport dynamics. Journal of Physical Chemistry C, 116 (42). pp. 22112-22120. ISSN 1932-7447 (print); 1932-7455 (online). (Published)

Ema Farima, Rustam Ali Khan (2012) Making an eco friendly board by using lignin- soy based natural adhesive. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Emilia, Adzmi (2012) Lecture timetabling using heuristic technique. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Engku Muhammad Syuhada, Raja Omar (2012) Food court ordering system using mobile application (fooCOSUMA). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Enti Nashila, Riazuddin (2012) Input shaping and PID controller for rotary crane. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Erny Afiza, Alias (2012) Skin friction reduction by micro bubbles in pipe flow. Masters thesis, Tokai University (Contributors, UNSPECIFIED: UNSPECIFIED).

Esfahani, J.A. and Karbasian, H.R. (2012) Optimizing the Shape of Rotor Blades for Maximum Power Extraction in Marine Current Turbines. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 722-729. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ezihaslinda, Ngah (2012) GIGVAGANZA 2 in the house! Ilham, 9 . p. 8. ISSN 1985-157X

Ezihaslinda, Ngah and Balan, Kunjambu and Wan Jumani, Fauzi (2012) Strategies for Kubang Kerian Nursing College. Ilham, 9 . p. 11. ISSN 1985-157X

Ezzad, Ezani (2012) Study on pool combustion of tire wasted fuel, plastic fuel and diesel fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ezzad, Ezani (2012) Study on pool combustion of tire wasted fuel, plastic fuel and diesel fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

F

F., Basrawi and Takanobu, Yamada and Kimio, Nakanish and Hideaki, Katsumata (2012) Analysis of the Performances of Biogas-Fuelled Micro Gas Turbine Cogeneration Systems (MGT-CGSs) in Middle- and Small-Scale Sewage Treatment Plants: Comparison of Performances and Optimization of Mgts with Various Electrical Power Outputs. Energy, 38. pp. 291-304. ISSN 0360-5442. (Published)

F., Basrawi and Yamada, Takanobu (2012) Energetic and Economic Analysis of a Micro Gas Turbine Cogeneration System in Residential Buildings in a Tropical Region. In: Malaysian Technical Universities Conference on Engineering and Techology , 20-21 November 2012 , Hotel Seri Malaysia, Kangar Perlis. . (Unpublished) (Unpublished)

Fadhilah, Ahmad and Noraziah, Ahmad and Suhailan, Safei and Azrul Amri, Bharun Abidin and Abdalla, Ahmed N. and Aznida Hayati, Zakaria Mohamad (2012) Developmental issues of web-based decision support system. Journal of Applied Sciences, 12 (19). pp. 2059-2064. ISSN 1812-5654. (Published)

Fadzida, Ismail and Noor Azlinna, Azizan and Nurhaizan, Mohd Zainudin and Suziyana, Mat Dahan and Lee, Chia Kuang (2012) Education Of Moral Principles in Future Construction Players. International Journal of Technology Management, 1. pp. 9-22. ISSN 2289-2753. (Published)

Fadzlan Nisha, Muhamad Nasharudin (2012) Analysis of control methods for boost DC-DC converter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Faidzarizal, Idris (2012) Faculty of system computer and software engineering asset management using RFID. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Fairuz, Rosni (2012) Continuous hydrogen production with anaerobic palm oil mill effluent (POME) sludge immobilized synthetic polymer. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Faisal, Jusoh (2012) Pemantapan pengurusan akademik melalui pembangunan Sistem Pengurusan Kualiti Akademik (AQMS). CREATE . p. 23. ISSN 1823-7487

Faiz Aswad, Ayop Azmi (2012) Design and analysis of wheelchair for usage of handicap people. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Faiz Misuari, Mohamad Ali (2012) Inventory management and payment system using RFID as a medium. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Fakhreldin, Mohammed Adam Ibrahim and Khalid, Edris and Jasni, Mohamad Zain and Norrozila, Sulaiman (2012) Efficient Algorithms to Index, Store and Query XML Documents. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 281-286.. (Published)

Fakhrul Hakimi, Saidi (2012) Secure text transfer via bluetooth using hybrid encryption. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Fakir, Md Moslemuddin and S., Basri and M. M., Rahman and R. A., Bakar (2012) Efficient finite element and differential quadrature methods for heat distribution in one-dimensional insulated-tip rectangular fin. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (1). ISSN 1757-899X (Published)

Farah Norhazrina, Rosli (2012) Estimating time travelling for flood from upstream to downstream using Muskingum method : Sungai Kuantan, Pahang Darul Makmur. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fareez Farhan, Suliman (2012) Welding fault detection using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Farid Ahammad, Sobhani and Azlan, Amran and Yuserrie, Zainuddin (2012) Sustainability Disclosure in Annual Reports and Websites: A Study of the Banking Industry in Bangladesh. Journal of Cleaner Production, 23 (1). pp. 75-85. ISSN 0959-6526. (Published)

Farid Ridwan, Abdull Hadi (2012) Intership management system. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Fatimah Azzahra, Misebah (2012) Effect of inoculums concentration, temperature and agitation rate on solvent production from palm oil mill effluent (POME) by Clostridium Beijerinckii ATCC 51743. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Fatin Nadiah, Abd Hamid (2012) Production and Characterization of Bamboo Fibre Reinforced PVC Composites. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Najibah, Raduan (2012) Delivery Notification System Using Web Based. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Fatinah, Abdul Ghani (2012) DC motor controlled based on microcontroller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Fatmawati, Adam and Nurul Kalyisah, Abd Khar (2012) Molecular Recognition of 2,6-Dihydroxybenzoic Acid Polymorph In Ethanol, Methanol and P-Xylene Solution. In: The 2nd International Conference On Computation For Science And Technology , 9-11 July 2012 , Nigde,Turkey. . (Published)

Faturachman, Danny (2012) Rescue Boat Design Utilizing Reused Plastic Bottles For Accident Preventation. In: 2nd International Conference on Mechanical and Manufacturing Engineering , 6-8 June 2012 , Putrajaya International Convention Centre. . (Published)

Faturachman, Danny and Shariman, Mustafa (2012) Analysis of Indonesian Ship Accident 2005-2010. In: International Conference on Computer, Electrical, and Systems Sciences, and Engineering (ICCESSE 2012) , 6-7 Dec 2012 , Penang. . (Unpublished) (Unpublished)

Faturachman, Danny and Shariman, Mustafa (2012) Indonesian'€™s Ship Safety Assessment Strategy. In: International Conference on Technology Management & Technopreneurship (IC-TMT 2012) , 6-7 February 2012 , Melaka. . (Unpublished) (Unpublished)

Faturachman, Danny and Shariman, Mustafa (2012) Performance of Safety Sea Transportation. Procedia - Social and Behavioral Sciences. (Published)

Faturachman, Danny and Shariman, Mustafa (2012) Sea Transportation Accident Analysis In Indonesia. In: The 2012 International (Spring) Conference on Asia Pacific Business Innovation and Technology Management , 13-15 January 2012 , Pattaya, Thailand . . (Published)

Faturachman, Danny and Shariman, Mustafa (2012) Trend Analysis of Ship Accidents in Indonesia. World Academy of Science, Engineering and Technology (2 (Jan). ISSN 2010-376x; 2010-3778 (electronic). (Published)

Fauzurrahman, Zulkepli (2012) Study on effect of crushed tile as coarse aggreagate replacement in concrete. Faculty of Civil Engineering, Universiti Malaysia Pahang.

Fazeeda, Mohamad and Razman, Mat Tahar (2012) Measuring Palm Oil Mill Capacity Using Modelling and Simulation. International Journal of Technology Management, 1. pp. 1-8. ISSN 2289-2753. (Published)

Faznurfariza, Firdaus@Nicholas (2012) Extraction of glycolic acid from natural sources. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ferdous, Kaniz and Uddin, M. Rakib and Islam, Rehnuma and Khan, Maksudur R. and Islam, M. A. (2012) Potentiality of Biodiesel Production From Non-Edible Oil: Bangladesh Perspective. Journal of Chemical Engineering, 27 (2). pp. 1-5. ISSN 2221-7436. (Published)

Ferdous, Kaniz and Uddin, M. Rakib and Uddin, M. Rahim and Khan, Maksudur R. and M. A., Islam (2012) Optimization of Three-Step Method For Biodiesel Production From Waste Cook Oil. Journal of Chemical Engineering, 27 (2). pp. 6-10. ISSN 2221-7436. (Published)

Finny, Mohamed (2012) UMP jalin kerjasama dengan PSMZA. CREATE . p. 16. ISSN 1823-7487

Firdaus, Muhamad (2012) Development of solar oven incorporating thermal energy storage application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Firdaus Haikal, Ramli (2012) Design of single cylinder variable compression ratio 4-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Flamino Doril, Zepher (2012) UMP library Wi-Fi access control system (ULWACS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Fong, Khai Yeh (2012) Finite element analysis of end-plate connection under seismic loading. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fong-Woon, Lai and Noor Azlinna, Azizan (2012) Critical Review of Literature on Enterprise Risk Management and the Cost of Capital: The Value Creation Perspective. African Journal of Business Management, 6 (9). pp. 3126-3133. ISSN 1993-8233. (Published)

Foo, Say Yei and Cheng, C. K. and Nguyen, Tuan-Huy and Adesina, Adesoji A. (2012) Syngas Production from CH4 Dry Reforming Over Coeni/Al2O3 Catalyst: Coupled Reaction-Deactivation Kinetic Analysis and the Effect of O2 Co-Feeding on H2:CO Ratio. International Journal of Hydrogen Energy, 37 (22). 17019 -17026. ISSN 0360-3199. (Published)

G

Gaanty Pragas, Maniam and Boey, Peng Lim and Shafida, Abd Hamid and Mohamed Hag Ali, Dafaalla (2012) Crab and Cockle Shells as Catalysts for the Preparation of Methyl Esters from Low Free Fatty Acid Chicken Fat. Journal of the American Oil Chemists' Society, 88 (Issue ). pp. 283-288. ISSN 0003-021X (Print), 1558-9331 (Online). (Published)

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan (2012) Rebuttal to the Arguments in the Letter to the Editor: Improvement May be Possible. Journal of the American Oil Chemists' Society, 89 (Issue ). pp. 737-740. ISSN 0003-021X (Print), 1558-9331 (Online). (Published)

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan and Melati, Khairuddean (2012) Sequential Conversion of High Free Fatty Acid Oils Into Biodiesel Using a New Catalyst System. Energy, 46 (Issue ). pp. 132-139. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan and Melati, Khairuddean and Lee, Siew Ee (2012) A New Heterogeneous Acid Catalyst System for Esterification of Free Fatty Acids Into Methyl Esters. Applied Catalysis A: General, 433–43. pp. 12-17. ISSN 0926-860X. (Published)

Gaanty Pragas, Maniam and Shangeetha, Ganesan and Boey, Peng Lim and Melati, Khairuddean and Sau-Lai, Lim (2012) A New Catalyst System in Transesterification of Palm Olein: Tolerance of Water and Free Fatty Acids. Energy Conversion and Management, 56 . pp. 46-52. ISSN 0196-8904. (Published)

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan and Melati, Khairuddean (2012) Catalysts Derived from Waste Sources in the Production of Biodiesel Using Waste Cooking Oil. Catalysis Today, 190 (Issue ). pp. 117-121. ISSN 0920-5861. (Published)

Gan, Leong Ming (2012) Development of dish-stirling concentrating solar thermal-electric energy conversion system /. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gan, Leong Ming (2012) Development of dish-stirling concentrating solar thermal-electric energy conversion system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ghaderi, Hadi and Avakh Darestani, Soroush and Zulkiffle, Leman and Mohd Yusof, Ismail (2012) Horizontal collaboration in logistics: A feasible task for group purchasing. International Journal of Procurement Management, 5 (1). pp. 43-54. ISSN 1753-8440. (Published)

Goh, Tok Mun (2012) Film behaviour of natural rubber latex treated with banana skin. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Goh, Swee Tian (2012) Home alarm monitoring network. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Govindasamy, Inba Malar (2012) Improving the water flow in pipelines using floating technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Gupta, Arun and Nuruldiyanah, Kamarudin and Chua, Gek Kee and R. M., Yunus (2012) Extraction of Keratin Protein from Chicken Feather. Journal of Chemistry and Chemical Engineering, 6 (8). pp. 732-737. ISSN 1934-7375 . (Published)

Gupta, Ritu and Norrozila, Sulaiman and Beg, M. D. H. and Gupta, Arun (2012) An Enhanced Model for Prediction of Young Modulus of Composite. Procedia Technology, 1. pp. 303-307. ISSN 2212-0173. (Published)

H

H. A., Salaam and Zahari, Taha and Tuan Mohammad Yusoff, Tuan Ya (2012) Minimum Quantity Lubrication (MQL) using Ranque - Hilsch Vortex Tube (RHVT) for Sustainable Machining. Applied Mechanics and Materials, 217-219. pp. 2012-2015. ISSN 1662-7482. (Published)

Hafiz Kamal, Leang (2012) Data clustering using maximum dependency of attributes and its application to cluster agricultural products. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hafizoah, Kassim (2012) Congratulations! Ilham, 9 . p. 17. ISSN 1985-157X

Hafizoah, Kassim (2012) NIU visit. Ilham, 9 . p. 5. ISSN 1985-157X

Hafizoah, Kassim (2012) Our achievements at Cendekia Bitara Awards 2011. Ilham, 9 . p. 8. ISSN 1985-157X

Hafizoah, Kassim (2012) Spring Sonata. Ilham, 9 . p. 18. ISSN 1985-157X

Hafizoah, Kassim (2012) Subject monitoring and review workshop. Ilham, 9 . p. 7. ISSN 1985-157X

Hafizoah, Kassim (2012) The first UMP-EPT. Ilham, 9 . p. 6. ISSN 1985-157X

Hajar, Abdullah (2012) Lean production system knowledge improvement by implementing lean production system simulation game at WSA Engineering Sdn Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Halimatul Syahida, Mohamad Sanusi (2012) Reuse of sewage treatment plant effluent and domestic wastewater as a sustainable alternative water supply for landscape irrigation using drip irrigation system. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Hamdya Farhana, Mohidin Yahya (2012) Synthesis, structure determination and characterization of novel organometallic chromium hexacarbonyl derivatives via ligand (L) substitution /. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Hamzah, Ahmad and Wan Nur Diyana, Wan Mustafa and Mohd Rusllim, Mohamed (2012) Adaptive Speed Control for Autonomous Mobile Robot using Fuzzy Logic Controller. In: International Conference on Intelligent Robotics, Automation and Manufacturing (IRAM) , 28-30 November 2012 , Monash University, Sunway Campus, Kuala Lumpur. . (Unpublished) (Unpublished)

Hamzah, Al‐Mawali and Yuserrie, Zainuddin and Noor Nasir, Kader Ali (2012) Customer Accounting Information Usage and Organizational Performance. Business Strategy Series, 13 (5). pp. 215-223. ISSN 1751-5637. (Published)

HaniShazwani, Mohd Suhaimi (2012) Study on adsorption parameter to remove zinc from spent ipa using activated carbon. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hardinnawirda, Kahar (2012) The effect of rice husks as filler in polymer matrix composites. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hariz Sufiyan, Mohamed Sunari (2012) Investigation of machining performance of the PVD coated tungsten carbide by sandblasting pre-treatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hartini, Hamzah (2012) Study of hybrid induction heating in distillation process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hartini, Mustafa and A. R., Yusoff and M. Yusoff, Ismail (2012) Productivity study and line balancing of GGMG & CALICO production line. Advanced Materials Research, 576. pp. 700-704. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Hasan, Ahmad and M. R., Abdul Hamid (2012) Modelling of Factors Correlated with the Umrah Performing Trend Among Middle Class Malaysian Muslims. In: SHP-KPT 2012 , 2012 , AKEPT . . (Unpublished) (Unpublished)

Hasfazri, Abdul Rahman (2012) Cylinder by cylinder engine modeling of single cylinder 4 stroke engine for control system development. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasmadi, Hassan and Hafizoah, Kassim (2012) Quantitative research course. Ilham, 9 . p. 10. ISSN 1985-157X

Hasrul, Che Shamsudin and Addie Irawan, Hashim and Zuwairie, Ibrahim and Amar Faiz, Zainal Abidin and Sophan Wahyudi, Nawawi and Muhammad Arif, Abdul Rahim and Kamal, Khalil (2012) A fast discrete gravitational search algorithm. In: IEEE 4th International Conference on Computational Intelligence, Modelling and Simulation (CIMSim 2012) , 25-27 September 2012 , Kuantan, Pahang Darul Makmur. pp. 24-28.. ISBN 978-1-4673-3113-5 (Published)

Hassan, Hishamudin (2012) The accuracy of micro-core compressive test to predict the strength of concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Hassanal, Haris (2012) The study of mass and heat transfer on shell and tube heat exchanger. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hazan Idayu, Abdul Halim (2012) Computational analysis of heat conduction in nanowood composite boards. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Haziatun, Mohd Fazi (2012) Biodelignification of oil palm trunk- optimization. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Haziratul Najihah, Othman (2012) Design and analysis of a cloth drying machine by using heat waste. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazlina, Faizal (2012) Financial sustainability in UMP's strategic plan. Quest, 8 (5). p. 14. ISSN 1985-8159

Hazlinda, Sapee (2012) Optimal design of inter-plant water network with centralized regeneration system. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hazlyza, Zainon (2012) Review of speed limit for FR222 access road to Gambang toll. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Hazreena, Hamzah (2012) The effects of moisturisers's physico-chemical properties on customers preference towards foreign and local products. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Hazwani, A Hazah (2012) Fabrication of nf membrane using phase inversion method for dye removal. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hazwani, Harif (2012) Impact of poor management in construction. Faculty of Civil Engineering, Universiti Malaysia Pahang.

Hazwani, Sidik (2012) Prediction of grinding machanability when grinds Haynes 242 using water based coolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazwani, Zulkiply (2012) Optimization of extraction parameters of total phenolic compound from Cosmos caudatus. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hazwani Liana, Abbas (2012) Sekolah Kebangsaan Alai online booking system (SKAOBS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hegde, Gurumurthy and Fun, Hoong-Kun and Loh, Wan-Sin and Shenvi, Seema and Isloor, Arun M. (2012) Ethyl 1-(2,4-dichloro­benz­yl)-4-oxo-7-trifluoro­meth­yl-1,4-dihydro­quinoline-3-carboxyl­ate. Acta Crystallographica Section E: Structure Reports Online, 68 (3). pp. 1-12. ISSN 1600-5368. (Published)

Hegde, Gurumurthy and Komitov, Lachezar (2012) Fast Switching Liquid Crystal Display Modes. In: Proceedings of SPIE Vol. 8280, Advances in Display Technologies IVI , 21 January 2012 , San Francisco, California, USA. p. 828006., 8280. (Published)

Hegde, Gurumurthy and Komitov, Lachezar and Kolev, Dimitar (2012) Future Generation Ultra-Fast Liquid Crystal Light Shutters. SID Symposium Digest of Technical Papers, 43 (1). pp. 1459-1461. ISSN 2168-0159. (Published)

Hegde, Gurumurthy and Garudacharia, B. and Satyanarayana, M. N. and Thippeswamy, B. and Shivakumar, C.K. and Shivananda, K.N. and Isloor, Arun M. (2012) Synthesis, Characterization and Antimicrobial Studies of Some New Quinoline Incorporated Benzimidazole Derivatives. European Journal of Medicinal Chemistry, 54. pp. 900-906. ISSN 0223-5234 (print); 1768-3254 (online). (Published)

Hegde, Gurumurthy and M. M., Yusoff and Lutfor, M. R. and Huey, Chong Kwong and Mohamed Ibrahim, Mohamed Tahir (2012) 1-[4-(Prop-2-en-1-yl­oxy)benz­yl]-2-[4-(prop-2-en-1-yl­oxy)phen­yl]-1H benzimidazole. Acta Crystallographica Section E - Crystallography Journals Online, 68 (12). pp. 3311-3312. ISSN 1600-5368. (Published)

Helal, Mohammed H.S. and Kamal Z., Zamli (2012) P2R - A Pairwise Testing Strategy Supporting Execution Resumption. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 239-250.. (Published)

Helmi, Mohamed Isa (2012) Technology Transfer Office. Quest, 8 (5). p. 16. ISSN 1985-8159

Helmy Muhamad, Khairi (2012) Study on bonding and chemical properties of coastal plastics waste. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Heng, Poh Chai (2012) Detection of driver cognitive distraction under secondary task using MATLAB. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Heng, Poh Xuan (2012) MC68000 Microprocessor stand alone educational board. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Herawan, Tutut and Noraziah, Ahmad and Zailani, Abdullah and Mustafa, Mat Deris and H. Abawajyd, Jemal (2012) EFP-M2: Efficient model for mining frequent patterns in transactional database. In: 4th International Conference on Computational Collective Intelligence (ICCCI 2012) , 28-30 November 2012 , Ho Chi Minh City, Viet Nam. pp. 29-38., 7654. ISSN 03029743 ISBN 978-364234706-1 (Published)

Herawan, Tutut and Zailani, Abdullah (2012) CNAR-M: A model for mining critical negative association rules. In: 6th International Symposium on Intelligence Computation and Applications (ISICA 2012) , 27-28 October 2012 , Wuhan, China. pp. 170-179., 316. ISBN 978-3-642-34289-9 (Published)

Hilda, Zainal (2012) Auto generate women cloth template. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ho, Ka Hui (2012) Cost reduction study of bicycle by using DFA methods. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hojabri, Mojgan and Mohammadsoroush, Soheilirad and Mahdi, Hedayati (2012) Available Transfer Capability and Least Square Method. Scientific Research and Essay , 7 (18). pp. 1777-1785. ISSN 1992-2248. (Published)

Hong, Yuen Fatt (2012) Synthesis and swelling behaviour of rice husk based superabsorbent polymer composite. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hooi Fong, Tan (2012) Automatic sport facilities management system (UMPASFMS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hossin, Amjed and Islam, Mir Sujaul and Nasly, Mohamed Ali and Zularisam, A. W. and Edriyana, Abd Aziz (2012) Spatial Variation of Surface Water Quality at Gebeng Industrial Estate, Pahang, Malaysia. In: National Conference on Postgraduate Research (NCON-PGR) 2012 , 8-9 September 2012 , Universiti Malaysia Pahang. . (Published)

Hou, Lo Wei (2012) Optimization of cutting parameters and surface roughness on dry turning of low carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hua Chyn, Lee (2012) Evaluation of membrane anaerobic system (MAS) for palm oil mill effluent (POME) treatment. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Huei, Ruey Ong (2012) Optimization and characterization of melamine urea formaldehyde (MUF) based adhesive using natural fillers for plywood. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Prasad, D.M. Reddy).

Hui Min, Chow (2012) Design of a working model hovercraft. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Husnul ‘Asyiyyah, Mohamad @ Awang (2012) Development of vision autonomous guided vehicle behaviour using neural network. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

I

Ibrahim, Thamir K. and M. M., Rahman (2012) Parametric study of a two-shaft gas turbine cycle model of power plant. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-13., 36 (012024). ISSN 1757-899X (Published)

Ibrahim Ali, Abushaiba and Yuserrie, Zainuddin (2012) Performance Measurement System Design, Competitive Capability, and Performance Consequences - A Conceptual Like. International Journal of Business and Social Science, 3 (11). pp. 184-193. ISSN 2219-1933 (Print); 2219-6021 (Online). (Published)

Insyirah, Mohd Yunus (2012) assenger information system (PIS) for Kuantan - Tanjung Lumpur bus route. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Intan Diana, Musa (2012) The causes and effect of delay in construction industry project. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Intan Sakinah, Mohd Sharip (2012) Fischer-Tropsch (FT) synthesis of hydrocarbon over mesoporous CO/SBA-15 catalysis. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Intan Shafinaz, Abd Manaf (2012) Poly (vinyl alcohol) (PVA) nanofibers embedded with silver nanoparticles for antibacterial studies-by electrospinning method. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Intan Suhana, M. R. and Zulkiple, Adnan and Ismail, Azlina B.H. and Mohd. Ziunizan, Hamzah and Amir Asyraf, Idris (2012) Modeling on the association between road environment contributory factors and road traffic accidents for Federal Road 2. , [Research Report] (Unpublished)

Irzad, Hairani (2012) Online repository system for Petakom club. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Isaac King, Yiu Joa (2012) Controlling speed and direction of stepper motor using XBEE module. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Iskandar, Salehuddin (2012) Pasukan Jabatan Bendahari, FKEE dan FKM juara Kejohanan Bola Tampar Tertutup UMP. CREATE . p. 54. ISSN 1823-7487

Iskandar Rizan, Muhamad (2012) Transmission mode ultrasonic tomography to identify liquid or solid flow regime. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Islam, Mir Sujaul and B. S., Ismail and Muhammad Barzani, Gasim and A. R., Sahibin and T., Mohd Ekhwan (2012) Hydrological Assessment and Water Quality Characteristics of Chini Lake, Pahang, Malaysia. American-Eurasian Journal of Agricultural & Environmental Sciences, 12 (6). pp. 737-749. ISSN 1818-6769. (Published)

Islam, Mir Sujaul and B. S., Ismail and Muhammad Barzani, Gasim and Mohd Ekhwan, Toriman and Sahibin, Abd. Rahim and Zularisam, A. W. (2012) Application of GIS for Detecting Changes of Land Use and Land Cover in Tasik Chini Watershed, Pahang, Malaysia. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 13-21. ISSN 2180-2742. (Published)

Islam, Mir Sujaul and Hossain, Mohamed Amjed and Nasly, Mohamed Ali and Edriyana, Abd Aziz (2012) Assessment of Spatial Variation of Surface Water Quality at Gebeng Industrial Estate, Pahang, Malaysia. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 61-66. ISSN 2180-2742. (Published)

Islam, Mir Sujaul and Hossain, Mohamed Amjed and Sobahan, Md Abdus and Zularisam, A. W. and Edriyana, Abd Aziz (2012) Spatial Variation of Water Quality Parameters in Gebeng Industrial Area, Pahang, Malaysia. In: International Proceedings of Chemical, Biological and Environmental Engineering (IPCBEE) , 29-30 December 2012 , Hong Kong. pp. 6-11., 49. ISSN 2010-4618 ISBN 2010-4618 (Published)

Islam, Mir Sujaul and Hossain, Mohamed Amjed and Zularisam, A. W. and Edriyana, Abd Aziz and Sobahan, Md Abdus (2012) Assessment of Water Quality Status in Gebeng Industrial Area, Pahang, Malaysia. In: International Seminar of Analytical Sciences 2012 (SKAM 25) , 12-13 November 2012 , Medan, Indonesia. p. 54.. (Published)

Islam, Mir Sujaul and Muhammad Barzani, Gasim and B. S., Ismail and A. R., Sahibin and T., Mohd Ekhwan (2012) Estimation of the Rate of Soil Erosion in the Tasik Chini Catchment, Malaysia using the RUSLE Model Integrated with the GIS. Australian Journal of Basic and Applied Sciences, 6 (12). pp. 286-296. ISSN 1991-8178. (Published)

Islam, S. M. Rafiqul (2012) Synthesis of xylitol from meranti wood sawdust in batch process by locally produced xylose reductase. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Ismail, Ibrahim and Zulkifli, Md. Yusof and Sophan Wahyudi, Nawawi and Muhammad Arif, Abdul Rahim and Kamal, Khalil and Hamzah, Ahmad and Zuwairie, Ibrahim (2012) A novel multi-state particle swarm optimization for discrete combinatorial optimization problems. In: IEEE 4th International Conference on Computational Intelligence, Modelling and Simulation (CIMSim 2012) , 25-27 September 2012 , Kuantan, Pahang Darul Makmur. pp. 18-23.. ISBN 978-1-4673-3113-5 (Published)

Izyan, Ismail (2012) Design of optimal water allocation network in chlor-alkali plant. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Izzat Hafifi, Ahmad Ariza (2012) Help Desk System. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

J

J. Hadiab, Arkan and Ghazi Faisal, Najmuldeen and Iqbal, AKM Asif (2012) Potential solvent for reconditioning polyolefin waste materials. Journal of Polymer Engineering, 32 (8-9). pp. 585-591. ISSN 2191-0340. (Published)

Jac Kie, Si (2012) A design of a community of practice (COP) portal. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Jahir Hussain, Fathima Shahitha and M. M., Yusoff (2012) Fabrication and Characterization of Electrospun Silver Nanofibers with Unmatched Porosity. In: 12th International Conference on Nanotechnology (IEEE NANO 2012) , 20-23 August 2012 , Birmingham, UK. . (Unpublished) (Unpublished)

Jailani, Salihon and N., Zainol (2012) Kinetic Modeling of Biogas Generation from Banana Stem Waste. In: Analysis and Design of Biological Materials and Structures. Advanced Structured Materials, 14 . Springer , Berlin Heidelberg, pp. 175-184. ISBN 978-3-642-22130-9 (print); 978-3-642-22131-6 (online)

Jaleha, Sathar (2012) Optimization Of Bacterial Cellulose Production From Acetobacter Xylinum By Using Response Surface Methodology (Rsm). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jamilah, Mohamad (2012) Sustainable parking management strategy for Tengku Ampuan Afzan Hospital Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Jamilah, Mustafha (2012) Prediction of grinding machinability when grind aluminium alloy using water based coolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jasni, Mohamad Zain and Abdullah, Embong and Rahayu, Santi Puteri and Juwari, S and Purnami, Santi Wulan (2012) Logistic Regression Methods with Truncated Newton Method. Procedia Engineering, 50. pp. 827-836. ISSN 1877-7058. (Published)

Jasni, Mohamad Zain and Ahmed, M. Mahmood and Ahmed, M. Masroor (2012) A Study on the Validation of Histogram Equalization as a Contrast Enhancement Technique. In: Proceedings of International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2012) , 26-28 November 2012 , Kuala Lumpur. pp. 253-256.. ISBN 978-1-4673-5832-3 (Published)

Jasni, Mohamad Zain and Ahmed, M. Masroor and Rana, M.T.A (2012) Context Independent Expectation Maximization Algorithm for Segmentation of Brain MR Images. In: Proceedings of International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2012) , 26-28 November 2012 , Kuala Lumpur. pp. 436-441.. (Published)

Jasni, Mohamad Zain and Deka, Ganesh Ch and Mahanti, Prabhat (2012) ICT's Role in e-Governance in India and Malaysia: A Review. Journal of Next Generation Information Technology, 3 (1). pp. 7-16. ISSN 2092-8637. (Published)

Jasni, Mohamad Zain and Tao, Hai and Ahmed, M. Masroor and Abdalla, Ahmed N. and Jing, Wang (2012) A Wavelet-Based Particle Swarm Optimization Algorithm for Digital Image Watermarking. Integrated Computer-Aided Engineering, 19 (1). pp. 81-91. ISSN 1069-2509 (print); 1875-8835 (online). (Published)

Jaycelyne, Lemba Jerry (2012) Modeling of PV systems by using Matlab/Simulink. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Jeniffer, Chegaram (2012) Image steganography. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Jessinta, Sandanasamy (2012) Larvicidal properties of extracts from different parts of neem (Azadirachta Indica) against Aedes Aegypti mosquitoes' larvae. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Jimy, Ronald Atorm (2012) Separation enhancement of palm kernel by its specific gravity and flow rate of clay water bath. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Jolius, Gimbun and Ali, Shahid and Chitra Charan, Suri Charan Kanwal and Liyana, Amer Shah (2012) Biodiesel Production from Rubber Seed Oil Using a Limestone Based Catalyst. Advances in Materials Physics and Chemistry, 2. pp. 138-141. ISSN 2162-531X (print); 2162-5328 (online). (Published)

Jolius, Gimbun and Rielly, Chris Rielly and Nagy, Zoltan Nagy and Derksen, Jos J. (2012) Detached Eddy Simulation on the Turbulent Flow in a Stirred Tank. AIChE Journal, 58. pp. 3224-3241. ISSN 1547-5905. (Published)

Jonatan, Jacqlyn (2012) Liquefied petroleum gas(LPG)storage design. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Junaidah, Zakaria and Sann, Lye Munn and Zailina, Hashim (2012) Asthma severity and environmental health risk factor among asthmatic primary school children in the selected areas. American Journal of Applied Sciences, 9 (10). pp. 1553-1560. ISSN 1546-9239 (print), 1554-3641 (online). (Published)

Junaidi, Zakaria and Muhammad Azlan, Nazeri (2012) Optimization of Bacterial Cellulose Production from Pineapple Waste: Effect of Temperature, pH and Concentration. In: 5th Engineering Conference, "Engineering Towards Change - Empowering Green Solutions" , 10-12th July 2012 , Kuching Sarawak. . (Published)

Junaidi, Zakaria and Shahril, Mohamad and Siew, Kah Weng (2012) Enhancement of Biocellulose Production in Mixed Medium Culture. In: Malaysian International Conference on Trends in Bioprocess Engineering 2012 (MICOTRIBE 2012) , 3-5 July 2012 , Meritus Pelangi Beach Resort & Spa, Langkawi. . (Unpublished) (Unpublished)

Juwari, S. and Chin, S. Y. and Badhrulhisham, Abdul Aziz and Rosbi, Mamat (2012) Experimental implementation of the Mp-GM (maximum peak-gain margin) tuning method a tuning method for 2DOF-IMC under uncertainty process. In: IEEE International Conference on Systems and Informatics (ICSAI 2012) , 19-20 May 2012 , Yantai, China. pp. 414-418.. ISBN 978-1-4673-0199-2 (Published)

K

K., Kadirgama and M. M., Rahman and A. R., Ismail and R. A., Bakar (2012) Surrogate Modelling to Predict Surface Roughness and Surface Texture When Grinding AISI 1042 Carbon Steel. Scientific Research and Essay , 7 (5). pp. 598-608. ISSN 1992-2248. (Published)

K., Kadirgama and M. M., Rahman and Bashir, Mohamed and R. A., Bakar and Ahmad Rasdan, Ismail (2012) Development of Temperature Statistical Model when Machining of Aerospace Alloy Materials. Thermal Science InternationalnScientific Journal, 18 (1). pp. 269-282. ISSN 2334-7163. (Published)

K., Ramesh and Anwaruddin, Hisyam and N., Aziz and S. R., Abd Shukor (2012) Nonlinear Model Predictive Control of a Distillation Column Using Wavenet Based Hammerstein Model. Engineering Letters, 20 (4). pp. 1-6. ISSN 1816-093X (Print); 1816-0948 (Online). (Published)

K. Kalyani, Radha and S.Naga, Sarada and K., Rajagopal (2012) Development of a Chest Freezer-Optimum Design of an Evaporator Coil. International Journal of Automotive and Mechanical Engineering (IJAME), 5, . pp. 597-611. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

Kae Shin, Yong (2012) Simulation of identifying shortest path walkway using particle swarm optimization (PSO). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Kah, Weng Siew (2012) Enhancement of biocellulose production in mixed medium culture. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Kamal, Yusoh (2012) Pemerkasaan program akademik visi berdaya saing. Berita Harian, (13 Se .

Kamal, M. A and Normah, Othman (2012) Training and Development for Library and Media Teachers in Selected Malaysian School Resource Centres. Journal of Education and Practice, 3 (6). ISSN 2222-1735 (Paper), 2222-288X (Online). (Published)

Kamal Z., Zamli and Rozmie Razif, Othman and Nugroho, Lukito Edi (2012) General Variable Strength T-Way Strategy Supporting Flexible Interactions. Maejo International Journal of Science and Technology , 6 (3). pp. 415-429. ISSN 1905-7873. (Published)

Kamal Z., Zamli and ‘Afaf Abdul Karim, Maryam and Rozmie Razif, Othman (2012) Lessons Learned from the Implementation of xGTWay families of Unit Testing Tool. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 233-238.. (Published)

Kamaluddin Sarif, Sukardi (2012) Optimization of fermentation for phb biopolymer using oil palm trunk SAP as medium component. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Kamarudin, Kamry (2012) Boost converter with power factor correction. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Kamarul Hawari, Ghazali and Jie, Maa and Rui, Xiao (2012) A PERCLOS-based Driver Fatigue Detection based Driver Fatigue Detection. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 51-54.. (Published)

Kamarul Hawari, Ghazali and Xiao, Rui and Ma, Jie (2012) Road lane detection using h-maxima and improved hough transform. In: 4th International Conference on Computational Intelligence, Modelling and Simulation (CIMSim 2012) , 25-27 September 2012 , Kuantan, Pahang Darul Makmur. pp. 205-208.. ISSN 2166-8523 (Published)

Kamisah, Kormin (2012) The contextual factors in the recognition of commercialization opportunity among Malaysian public universities researchers. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kaniz, Ferdous and Uddin, M. Rakib and Khan, Maksudur R. and Islam, M. A. (2012) Biodiesel from Sesame Oil: Base Catalyzed Transesterification. International Journal of Engineering and Technology, 1 (4). pp. 420-431. ISSN 2049-3444. (Published)

Karthik, Vasutheavan (2012) Production of biodiesel from rubber seed. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Karthini, Kanestion (2012) Development Of Glass Coating Using Liquid Epoxidised Natural Rubber. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kasim, A. R.M. (2012) Numerical solutions on non-newtonian fluid model. , [Research Report] (Unpublished)

Khafniza, Khanafiah (2012) Formulation of antibiotic ointmentfrom the jatropha latex curcas. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairi Ali, Abulgasem Alennabi (2012) Study on biodegradation of Miri and Masila crude oil and used car oil by microorganisms isolated from Malaysian soil and the effect of aeration and NKP addition on biodegradation process. EngD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Azhari Hamid, Nour).

Khairul Afif, Mohammad (2012) Silver recovery from spent IPA using solid liquid extraction. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Khairul Afiq, Zakaria (2012) Speed control of DC motor by using fuzzy logic controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Anuar, A. Rahman (2012) Design of revetec engine cam with cycloidal motion profile. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Anuar, A. Rahman (2012) Design of revetec engine cam with cycloidal motion profile. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Anuar, Shahid and Mohammad Amirulkhairi, Zubir and Aizat, Alias (2012) Structural Health Monitoring Based Time- Dependent Reliabilityanalysis of Concrete Bridge. In: International Conference on Civil Engineering 2012 , 28-30 August 2012 , Park Royal Penang. . (Unpublished) (Unpublished)

Khairul Anwar, Ibrahim (2012) The effect of corrosion defects on burst pressure of pipelines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Azlan, Ismail (2012) Optimization of cyclone efficiency for separation of fibre and shell from palm kernel. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Khairul Azmi, Mohd Mawardzi (2012) Investigation of machining performance of the coated carbide cutting tools with murakami surface pretreatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Azri, Ngadimen (2012) Develop a weight detection unit of the glass collection machine with reward system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Khairul Bariah, Mashid (2012) The parametric study of electromagnetic for energy harvester. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Syahmi, Ahmad (2012) Development of round die for press brake machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairun Nadrah, Hamidzon (2012) The evaluation on the performances of a roundabout at Taman Tas, Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Khairunisa, Muthusamy and Norul Wahida, Kamaruzaman (2012) Assessment of Malaysian Laterite Aggregate in Concrete. International Journal of Civil & Environmental Engineering, 12 (4). pp. 83-86. ISSN 2077-1258 (Online); 2227-2763 (Print). (Published)

Khairunisa, Muthusamy and Nurul Adha, Sabri (2012) Cockle Shell: A Potential Partial Coarse Aggregate Replacement in Concrete. International Journal of Science, Environment and Technology, 1 (4). pp. 260-267. ISSN 2277-663X (Print); 2278-3687 (Online). (Published)

Khalaf, Emad T (2012) Enhancement of cryptography and transform domain in steganography for higher embedding capacity. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Khalaf, Emad T (2012) Enhancement of cryptography and transform domain in steganography for higher embedding capacity. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazila, Sulaiman).

Khalaf I., Hamada and M. M., Rahman and A. Rashid, A. Aziz (2012) Time-averaged Heat Transfer Correlation for Direct Injection Hydrogen Fueled Engine. International Journal of Hydrogen Energy, 37. pp. 19146-19157. ISSN 0360-3199. (Published)

Khalaf Ibrahim, Hamada (2012) A study of the heat transfer in hydrogen fueled internal combustion engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rahman, Md. Mustafizur).

Khalid, Hasnan and Saesar, Luhur Budi and M. S., Ikhmatiar and Herawan, Tutut (2012) JOMS: System architecture for telemetry and visualization on unmanned vehicle. Procedia Engineering, 29. pp. 3899-3903. ISSN 1877-7058. (Published)

Khalid, Yunus and Saesar, Luhur Budi and Herawan, Tutut (2012) A hardware-in-the-loop simulation and test for unmanned ground vehicle on indoor environment. Procedia Engineering, 29. pp. 3904-3908. ISSN 1877-7058. (Published)

Khalilurrahman, Azizan (2012) Fabrication of antibacterial bio composite from bacterial cellulose and Areca Catechu extract. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khaliswaran, Keresnan (2012) Development of user interface for vibration measurement. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khan, Nawsher and Noraziah, Ahmad and Herawan, Tutut and Inayat, Zakira (2012) Cloud Computing: Locally Sub-Clouds instead of Globally One Cloud. International Journal of Cloud Applications and Computing (IJCAC), 2 (3). p. 68. ISSN 2156-1834 (print); 2156-1826 (online). (Published)

Khan, Nawsher and Noraziah, Ahmad and Ismail, Elrasheed I. and Mustafa, Mat Deris and Herawan, Tutut (2012) Cloud Computing: Analysis of Various Platforms. International Journal of E-Entrepreneurship and Innovation (IJEEI), 3 (2). pp. 51-59. ISSN 1947-8585 (print); 1947-8593 (online). (Published)

Khan, Nawsher and Noraziah, Ahmad and Tutut, Herawan and Elrasheed, Ismail (2012) Cloud Computing: Architecture for Efficient Provision of Services. Cloud Computing: Architecture for efficient provision of services . pp. 18-23. (Published)

Khan, Maksudur R. and Amin, M. S. A. and Sarker, S. and Ferdaus, K. (2012) Design and Fabrication of Membrane Less Microbial Fuel Cell (ML-MFC) using Food Industries Wastewater for Power Generation. Journal of Chemical Engineering, 27 (2). pp. 55-59. ISSN 2221-7436. (Published)

Khan, Maksudur R. and Bhattacharjee, Ripon and Amin, M. S. A. (2012) Performance of the Salt Bridge Based Microbial Fuel Cell. International Journal of Engineering & Technology, 1 (2). pp. 115-123. ISSN 2227-524X. (Published)

Khan, Maksudur R. and Mozumder, Salatul Islam and Islam, Akhtarul and Prasad, D. M. Reddy and Alam, M. Mohibul (2012) Methylene Blue Adsorption onto Water Hyacinth: Batch and Column Study. Water, Air and Soil Pollution , 223. pp. 2943-2953. ISSN 0049-6979 (print); 1573-2932 (online). (Published)

Khan, Maksudur R. and Saha, Pradip and Dep, T. K. and Sony, S. Y. and Baishnab, Ajit Chandra (2012) Treatment of Textile Dyes by Bio-chemical Process in Stirred Tank Sequencing Batch Bioreactor. Journal of Chemical Engineering, 27 (2). pp. 83-87. ISSN 2221-7436. (Published)

Khan, Nawsher and Noraziah, Ahmad and Herawan, Tutut (2012) A cloud architecture with an efficient scheduling technique. In: 3rd International Conference on Information Computing and Applications (ICICA 2012) , 14-16 September 2012 , Chengde, China. pp. 381-388., 7473. ISBN 978-3-642-34062-8 (Published)

Khan, Nawsher and Noraziah, Ahmad and Herawan, Tutut and Mustafa, Mat Deris (2012) Cloud computing: Analysis of various services. In: 3rd International Conference on Information Computing and Applications (ICICA 2012) , 14-16 September 2012 , Chengde, China. pp. 397-404.. ISBN 978-3-642-34062-8 (Published)

Khandakar Fazley, Rabbi (2012) Development of efficient t-way test data generation algorithm and execution strategies. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khong, Jia Wei (2012) Probabilistic finite element analysis of steel roof truss using Ansys. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Khoo, Choon Gek (2012) Production of virgin coconut oil via water soluble materials and centrifugation method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Khoo, Sue Ann (2012) Enhancement of flow in pipeline transportation for crude oil emulsion. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Kien Chung, Bert Chin (2012) Dynamic modeling of a reactive distillation column. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Koay, Gregory F. L. and Chuaha, Teong-Guan and Sumaiya, Zainal Abidin and Salmiah, Ahmad and Choonga, Thomas S. Y. (2012) Effects of temperature and solvent concentration on the solvent crystallization of palm-based dihydroxystearic acid with isopropyl alcohol. Particuology, 10 (1). pp. 127-131. (Published)

Kok Wah, Liew (2012) An efficient approach for vision inspection of IC chips. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Koo, Nelton Chwee Yang (2012) Design of wind tunnel (fluid flow analysis). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Kritiga Shankar, Murugesan (2012) A comparison between the modern hydro distillation technique and microwave extractor in extracting lignans from phyllanthus niruri. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kunasegeran, Thinesh (2012) Direct current motor control led by microcontroller created PWM. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Kusbiantoro, Andri and Mohd Sobri, Ibrahim and Khairunisa, Muthusamy and Aizat, Alias (2012) Development of Sucrose and Citric Acid as the Natural Based Admixture for Fly Ash Based Geopolymer. In: The 3rd International Conference on Sustainable Future for Human Security , 3 - 5 October 2012 , Kyoto University, Japan. . (Published)

Kusbiantoro, Andri and Muhd Fadhil, Nuruddin and Nasir, Shafiq and Sobia, Anwar Qazi (2012) The Effect of Microwave Incinerated Rice Husk Ash on the Compressive and Bond Strength of Fly Ash Based Geopolymer Concrete. Construction and Building Materials, 36. pp. 695-703. ISSN 0950-0618. (Published)

Kut Heng, Fred Tham and Noor Azlinna, Azizan and Yeap, Lau Wee (2012) Technical trading systems as crystal balls in reducing risk: The Malaysian stock market. International Business Management, 6 (2). pp. 140-146. ISSN 1993-5250. (Published)

Kwee Ming, Chang (2012) Integrated environmental protection biofeedback game (IEPBG) using galvanic skin response (GSR) sensor. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

L

L. H., Shah and Bun, T. and Nagata, S. and Shikama, T. (2012) The Effects of Gamma-Ray on the Mechanical Properties of Zr-Based Bulk Metallic Glass. International Journal of Automotive and Mechanical Engineering (IJAME), 6. pp. 713-721. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

L. Syam, Sundar and Kumar, N. T. Ravi and Naik, M. T. and Sharma, K. V. (2012) Effect of Full Length Twisted Tape Inserts on Heat Transfer and Friction Factor Enhancement with Fe3O4 Magnetic Nanofluid Inside a Plain Tube: An Experimental Study. International Journal of Heat and Mass Transfer, 55 (11-12). pp. 2761-2768. ISSN 0017-9310. (Published)

Lafsah, Mat Daud (2012) THD and efficiency study for PV grid-connected. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lai, Jin Frve (2012) Phytosterols from the seeds of petai (Parkia Speciosa). Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Lai, Woon Shyz (2012) Prediction of grinding machinability when grind P20 tool steel using TiO2 nanofluid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lai Ching, Wong (2012) Knowledge portal for handicraft products (KM). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lala, Neeta L. and Rajan, Jose and M. M., Yusoff (2012) Vanadium pentoxide nanotubes by eelectrospinning. In: International Conference on Nanotechnology - Research and Commercialization , 6-9 June 2011 , Sabah. pp. 389-401., 1502. ISSN 0094243X ISBN 978-073541119-7 (Published)

Lam, Kheng Yik (2012) Remote data logger with multi-sensor for greenhouse. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Latifah, Abu Bakar (2012) Miscibility study of gaharu essential oil in water and organic solvents. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Law, Xue Ni (2012) Detail design of waste plastic bottles rescue boat. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Law, Xue Ni (2012) Detail design of waste plastic bottles rescue boat. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lay Kee, New (2012) Enhancement of the tour guide webpage for Kinta tour guide webpage based on human computer interaction (HCI) elements by Jacob Nielsen. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lazim, Raghad Yaseen and Adzhar, Kamaludin (2012) Going Native: Native XML Database vs. Relational Database. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 287-291.. (Published)

Le Xin, Lee (2012) Design of obstacle avoidance robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lee, Chia Kuang and Noor Azlinna, Azizan (2012) Employers' Right in Set-Off as a Vindication for Non-Payment to the Contractors: A Discussion based on CIDB 2000, PAM 2006 and PWD Form 203(A) Standard Form of Contract. In: Malaysian Technical Universities Conference on Engineering and Technology MUCET2012 , 20-21 November 2012 , Hotel Seri Malaysia, Kangar Perlis. . (Published)

Lee, How Cheh (2012) Development of sound source separation as hand-free interface for in-vehicle infotainmenet system (IVIS). Faculty of Electric & Electronics Engineering, Universiti Malaysia Pahang.

Lee, Chee Wei (2012) Online ordering system of PCK engineering. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lee, Chia Kuang and Davidson, Elizabeth and Liu, Yao (2012) A Planned Behavior-Based Investigation of Knowledge Sharing in Construction Industry. In: International Management and Engineering Conference (EMC 2012) . . (Published)

Lee, Jin Yeow (2012) The finite element analysis of behavior of bolted column to I-beam connected with channel stiffeners. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee, Kok Wai (2012) Shear strength improvement of foundation soil by using polymer fiber reinforcement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee, Xin Leong (2012) Numerical analysis on simplified 2d model of heart valve leaflets during cardiac cycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Ying Ying (2012) Analysis of unbraced frame using ANSYS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee Ling, Ling (2012) YGK Payroll System. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Leong, Siew Yin (2012) Moringa oleifera as a potential source of lecithin. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Leong Wei, Theng (2012) IBM examination centre management system. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Liang, Yong Yeow (2012) Development of block-oriented model for reactive distillation column: MTBE synthesis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Lilan Sollan, Sarveswary (2012) UMP subject registration system in mainframe environment(zSRS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lilian, Cheah Mui Yeong (2012) Mechanical properties of concrete by using palm oil boiler stone (POBS) as partially fine aggregate replacement material. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lim, Qian Bing (2012) Implementation of ordering kanban for supplier at company Proreka (M) Sdn Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lim, Sing Wee (2012) CFD simulation using fluent to determine the heat transfer coefficient of a packed bed system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Linggang, Diana (2012) Biomass gasification of sugarcane bagasse and empty fruit bunch the effect of operating temperature and particle. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Loh, Wing Liong (2012) Performance of refrigerator operating with and without liquid-suction heating. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Loong, Winson Sia Shen (2012) Development Of Drilling Fluid System Using Carboxymethyl Cellulose (Cmc) For High Temperature-High Pressure (Hthp) Applications. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Low, Mee Peng (2012) Processed food knowledge portal. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Low, Miao Ying (2012) Effect of banana skins filler on thermal behavior of natural rubber latex films. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Lukman Nul-Hakem, Mohd Yusop (2012) Experimental study of six-stroke engine for heat recovery. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lutfor, M. R. and M. M., Yusoff and Huey, Chong Kwong and Hegde, Gurumurthy and Mohamed Ibrahim, Mohamed Tahir and Mohamad Zaki, Ab Rahman (2012) 4-{(E)-2-[4-(But-3-en-1-yloxy)phenyl]diazen-1-yl}Benzoic Acid. Acta Crystallographica Section E - Crystallography Journals Online, 68 (10). p. 2958. ISSN 1600-5368. (Published)

Lyntia, Ping Jawa (2012) A study on solid waste generation and composition from commercial sources (case study: Taman Tas Kuantan). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

M

M., Ishak and M. I., Rafiquel and M. M., Rahman (2012) Effects of Heat Input on Mechanical Properties of Metal Inert Gas Welded 1.6mm Thick Galvanized Steel Sheet. IOP Conference Series: Materials Science and Engineering, 36 (012011). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Ishak and Fatimah, S. and S. N., Aqida (2012) CO2 Laser Cutting of Glass Fiber Reinforce Polymer Composite. IOP Conference Series: Materials Science and Engineering, 36 (012033). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Ishak and Maekawa, Katsuhiro and Yamasaki, Kazuhiko (2012) The Characteristics of Laser Welded Magnesium Alloy Using Silver Nanoparticles as Insert Material. Materials Science and Engineering: A, 536 (February 2012). pp. 143-151. ISSN 0921-5093. (Published)

M., Ishak and Takagi, H. (2012) The Characteristics of Unidirectional Solidified Ni-Al-Mo Alloys = Charakterisierung von unidirektional erstarrten Ni-Al-Mo Legierungen. Materialwissenschaft und Werkstofftechnik = Materials Science and Engineering Technology, 43 (5). pp. 416-420. ISSN 0933-5137. (Published)

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2012) Laser Welding of Thin Sheet Magnesium Alloys. In: Nd YAG Laser. Intech Open Access Publisher, pp. 135-157. ISBN 978-953-51-0105-5 (online)

M., Kamal and M. M., Rahman (2012) Study on dynamic behaviour of wishbone suspension system. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012019). ISSN 1757-899X (Published)

M., Kamal and M. M., Rahman and Abdul Ghaffar, Abdul Rahman (2012) Fatigue Life Evaluation of Suspension Knuckle Using Multibody Simulation Technique. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 291-300. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. A., Ameedeen and Bordbar, Behzad (2012) A Case Analysis of IEEE 802.11 CSMACA Protocol Via Sequence Diagrams. In: Fourth International Conference on Computational Intelligence, Modelling and Simulation , 25-27 September 2012 , Kuantan, Pahang. pp. 347-351.. ISSN 2166-8531 ISBN 978-1-4673-3113-5 (Published)

M. A., Ameedeen and Zafril Rizal, M Azmi (2012) Wireless and configurationless iClassroom system with remote database via Bonjour. In: Computer Applications for Database, Education, and Ubiquitous Computing. EL2012, DTA2012. Proceedings , 16-19 December 2012 , Gangneug, South Korea. pp. 38-43., 352. ISBN 978-3-642-35603-2 (Published)

M. A., Hossain and Islam, Mir Sujaul and Nasly, Mohamed Ali and Zularisam, A. W. and Edriyana, Abd Aziz (2012) Assessment of Spatial Variation of Water Quality of Tunggak River Adjacent to Gebeng Industrial Estate, Malaysia. In: Proceedings of 3rd International Conference on Environmental Aspects of Bangladesh (ICEAB 2012) , 13-14 October 2012 , University of Kitakyushu, Fukuoka, Japan. pp. 23-26., 501 (47). ISBN 2186-4330 (print); 2186-4241 (online) (Published)

M. F., Ghazali (2012) Leak detection using instantaneous frequency analysis. PhD thesis, The University of Sheffield (Contributors, UNSPECIFIED: UNSPECIFIED).

M. F. F., Ab Rashid and Hutabarat, Windo and Tiwari, Ashutosh (2012) Development of a Tuneable Test Problem Generator for Assembly Sequence Planning and Assembly Line Balancing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (11). 1900-1913 . (Published)

M. F. M., Yunoh and S., Abdullah and Z. M., Nopiah and M. Z., Nuawi and Nurazima, Ismail (2012) Fatigue feature classification for automotive strain data. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (1). ISSN 1757-899X (Published)

M. H., Sulaiman (2012) Modified Firefly Algorithm in Solving Economic Dispatch Problems with Practical Constraints. In: IEEE International Conference on Power and Energy (PECON 2012) , 2-5 December 2012 , Kota Kinabalu, Sabah Malaysia. . (Unpublished) (Unpublished)

M. K. A., Mohamed and N. M., Nasir and N. S., Khasi'ie and Rahimah, Jusoh and Nor Hafizah, Moslim and Ezrinda, Mohd Zahidee and Mohd Zuki, Salleh (2012) Extreme pressure properties investigation of palm olein using four ball tribotester. In: AIP Conference Proceedings: International Conference on Fundamental and Applied Sciences (ICFAS2012) , 12-14 June 2012 , Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia. pp. 347-350., 1482 (347). ISBN 978-0-7354-1094-7 (Published)

M. M., Noor and Andrew P., Wandel and T. F., Yusaf (2012) MILD Combustion: A Technical Review Towards Open Furnace Combustion. In: 2nd Malaysian Postgraduate Conference , 7-9 July 2012 , Bond University, Gold Coast, Queensland, Australia . pp. 79-100.. (Published)

M. M., Noor and Wandel, Andrew P. (2012) Numerical Investigation of Influence of Air and Fuel Dilution for Open Furnace MILD Combustion Burner. In: Southern Regional Engineering Conference (SREC 2012) , 1-2 September 2012 , Toowoomba, Australia. . (Published)

M. M., Noor and Wandel, Andrew P. and T. F., Yusaf (2012) A Preliminary Study of Control Parameters for Open Furnace Mild Combustion Using CFD. In: 2nd Malaysian Postgraduate Conference , 7-9 July 2012 , Bond University, Gold Coast, Queensland, Australia . . (Published)

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2012) The Modelling of The Effect of Air Fuel Ratio on Unburned Hydrocarbons for MILD Combustion. In: 2nd Malaysian Postgraduate Conference , 7-9 July 2012 , Bond University, Gold Coast, Queensland, Australia . . (Published)

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2012) A Review of Mild Combustion and Open Furnace Design Consideration. International Journal of Automotive and Mechanical Engineering (IJAME), 6. pp. 730-754. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2012) The Study of Air Fuel Ratio for Open Furnace MILD Combustion of Biogas on Bluff-body Burner. In: Southern Regional Engineering Conference (SREC 2012) , 1-2 September 2012 , Toowoomba, Australia. . (Published)

M. M., Noor and A. Aziz, Hairuddin and Wandel, Andrew P. and Yusaf, T. F. (2012) Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-17., 36 (1). ISSN 1757-899X (Published)

M. M., Rahman (2012) Modeling of Machining Parameters of Ti-6Al-4V for Electric Discharge Machining: A Neural Network Approach. Scientific Research and Essay , 7 (8). pp. 881-890. ISSN 1992-2248. (Published)

M. M., Rahman and Khalaf, I. Hamada and A. Rashid, A. Aziz (2012) Characterization Of The Time-Averaged Overall Heat Transfer In A Direct-Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (11). pp. 4816-4830. ISSN 0360-3199. (Published)

M. M., Rahman and Khalaf I., Hamada and K., Kadirgama and R. A., Bakar (2012) Cycle Analysis of In-cyclinder Heat Transfer Characteristics for Hydrogen Fueled Engine. Scientific Research and Essay , 7 (8). pp. 891-902. ISSN 1992-2248. (Published)

M. M., Yusoff and Fazliana, Mansor and Gu, Harvest F. and Östenson, Claes-Göran and Wan Mohamud, Wan Nazaimoon (2012) Labisia Pumila Extract Down-Regulates Hydroxysteroid (11-beta) Dehydrogenase 1 Expression and Corticosterone Levels in Ovariectomized Rats. Journal of Natural Medicines, 66 (2). pp. 257-264. ISSN 1340-3443(print); 1861-0293(online). (Published)

M. M., Yusoff and Hegde, Gurumurthy and Abhishek, K. Srivastava and A.V., Adhikari and K., Vishnumurthy and V.G., Chigrinov and H.S, Kwok (2012) Recent Developments in Photoalignment Technology:Alignment Properties of a Thiophene Based Bis-hydrazone Derivative. In: 19th International Display Workshops 2012 (IDW/AD’12) , 4-5 December 2012 , Kyoto, Japan. pp. 97-98.. ISSN 1883-2490 (Published)

M. M., Yusoff and Hegde, Gurumurthy and V. G., Chigrinov and Hoi, Sing Kwok (2012) Nanoengineering of Aligning Cibacron Brilliant Yellow Using Light: Application in Flexible Displays. In: Malaysian Technical Universities Conference On Engineering and Technology (MUCET 2012) , 20-21 November 2012 , Hotel Seri Malaysia, Kangar, Perlis. pp. 727-730., 6. (Published)

M. M., Yusoff and Iwansyah, Ade Chandra (2012) Physicochemical, Minerals and Antioxidant Properties of Labisia pumila var. alata of Selected Geographic Origin. Journal of Agricultural Science (AGRIVITA), 34 (1). pp. 94-104. ISSN 0126-0537 (print), 2302-6766 (online). (Published)

M. M., Yusoff and Kuppusamy, Palaniselvam and Raj, R. S. David Paul and Natanamurugaraj, Govindan (2012) Isolation, Identification of Secondary Metabolites and Anti Bacterial Property of Memecylon Edule Leaves Extract. E-Journal of Life Science (EJLS), 1 (2). pp. 75-79. ISSN 2250-1800. (Published)

M. M., Yusoff and Nair, V. M. and Rajan, Jose and Kumar, G. M. Anil and Wariar, P. R. S. (2012) Nanocrystals of a New Complex Perovskite Dielectric Ba2TmSbO6. Journal of Alloys and Compounds, 512 (1). pp. 207-211. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

M. M., Yusoff and Rajan, Jose and Archana, Panikar Sathyaseelan and Viet, Anh Le and Bao, Qiao Liang and Loh, Kian Ping and Anil Kumar, Gopinathan Nair M. and Ramakrishna, Seeram (2012) Functional Films of Polymer-Nanocomposites by Electrospinning for Advanced Electronics, Clean Energy Conversion, and Storage. Advanced Materials Research, 545. pp. 21-26. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

M. M., Yusoff and Rajan, Jose and Kumar, E. Naveen and Archana, P. S. and Vijila, C. and Ramakrishna, Seeram (2012) High Performance Dye-Sensitized Solar Cells with Record Open Circuit Voltage using Tin Oxide Nanoflowers Developed by Electrospinning. Energy & Environmental Science, 5. pp. 5401-5407. ISSN 1754-5692 (print), 1754-5706 (online). (Published)

M. M., Yusoff and Tan, Wei Hsiang (2012) Chemical And Biological Studies Of Zingiber Phillipseae Rhizomes Extract. International Journal of Pharma & Bio Sciences, 3 (4). pp. 629-637. ISSN 0975-6299. (Published)

M. Mahmood, Ahmed and Jasni, Mohamad Zain and M. Masroor, Ahmed (2012) Image Partitioning Methods in Spatial and Frequency Domain. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 152-157.. (Published)

M. Nafis, O. Z. and Nafrizuan, Mat Yahya and Munira, Ali and Kartina, Johan (2012) Review on CNC-rapid prototyping. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012032). ISSN 1757-899X (Published)

M. R., Abdul Hamid and Zainol, Mustafa and Nur Riza, Mohd Suradi and Fazli, Idris and Mokhtar, Abdullah (2012) The Impact of Culture and Employee-Focused Criteria on Productivity: A Structural Equation Modelling Approach. In: AIP Conference Proceedings: 20th National Symposium on Mathematical Sciences , 18–20 December 2012 , Putrajaya. pp. 1442-1446., 1522 (1). ISBN 978-0-7354-1150-0 (Published)

M. R., Abdul Hamid and Zainol, Mustafa and Nur Riza, Mohd Suradi and Fazli, Idris and Mokhtar, Abdullah (2012) Value-Based Performance Excellence Measurement For Higher Education Institution: Instrument Validation. Quality & Quantity, 47 (6). pp. 3019-3030. ISSN 0033-5177. (Published)

M. R., Abdul Hamid and Zainol, Mustafa and Nur Riza, Mohd Suradi and Fazli, Idris and Mokhtar, Abdullah and Megawati, Omar (2012) Value-Based Performance Excellence Model for Higher Education Institutions in Malaysia: On Bayesian Structural Equation Modeling. Journal of Statistical Modeling and Analytics , 3 (1). pp. 52-57. ISSN 2180-3102 . (Published)

M. R., Abdul Hamid and Zainol, Mustafa and Nur Riza, Mohd Suradi and Fazli, Idris and Mokhtar, Abdullah and Nordin, Jamaluddin (2012) Model Kecemerlangan IPT Berasaskan Nilai Teras: Pendekatan Pemodelan Kuasa Dua Terkecil Separa. Journal of Quality Measurement and Analysis, 8 (1). pp. 1-15. ISSN 1823-5670. (Published)

M. R., Mohamed and S. M., Sharkh and H., Ahmad and M. N., Abu Seman and F. C., Walsh (2012) Design and Development of Unit Cell and System for Vanadium Redox Flow Batteries (V-RFB). International Journal of the Physical Sciences, 7 (7). pp. 1010-1024. ISSN 1992-1950. (Published)

M. Rafiqul, Islam and Mimi Sakinah, A. M. (2012) Kinetic studies on acid hydrolysis of Meranti wood sawdust for xylose production. Chemical Engineering Science, 71. pp. 431-437. (Published)

M. S., Najib and N. A., Mohd Ali and M. N., Mat Arip and M., Abd Jalil and M. N., Taib (2012) Classification of Agarwood using ANN. International Journal of Electrical and electronic Systems Research, 5. pp. 20-34. (Published)

M. S., Idris and M.Irwan, M. A. and N. M. M., Ammar (2012) Steady State Vortex Structure of Lid Driven Flow Inside Shallow Semi Ellipse Cavity. Journal of Mechanical Engineering and Sciences (JMES) , 2 (Jun. pp. 133-147. ISSN 2231-8380 . (Published)

M. S., Jadin and A. S., Nazmul Huda and Soib, Taib and Dahaman, Ishak (2012) A Semi-Automatic Approach for Thermographic Inspection of Electrical Installations Within Buildings. Energy and Buildings, 55. pp. 585-591. ISSN 0378-7788. (Published)

M. S., Jadin and Kamarul Hawari, Ghazali and Soib, Taib and Nazmul Huda, A. S. (2012) Finding Rois in Infrared Image of Electrical Installation for Qualitative Thermal Condition Evaluation. In: IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2012) , 23-25 November 2012 , Penang, Malaysia. pp. 244-249.. (Published)

M. S., Jadin and Soib, Taib (2012) Infrared Image Enhancement and Segmentation for Extracting the Thermal Anomalies in Electrical Equipment. Electronics and Electrical Engineering = Elektronika ir Elektrotechnika, 120 (4). pp. 107-112. ISSN 1392-1215 (print); 2029-5731 (online) . (Published)

M. S., Jadin and Soib, Taib (2012) Recent Progress in Diagnosing the Reliability of Electrical Equipment by Using Infrared Thermography. Infrared Physics & Technology, 55 (4). pp. 236-245. ISSN 1350-4495. (Published)

M. S., Jadin and Soib, Taib and Shahid, Kabir (2012) Thermal Imaging for Enhancing Inspection Reliability: Detection and Characterization. In: Infrared Thermography. InTech , Croatia, pp. 209-236. ISBN 978-953-51-0242-7

M. S., Najib (2012) Agarwood classification based on odor profile using intelligent signal processing technique. PhD thesis, Universiti Teknologi Mara (Contributors, UNSPECIFIED: UNSPECIFIED).

M. Z., Ibrahim and Mulvaney, D. J. (2012) Geometry based lip reading system using Multi Dimension Dynamic Time Warping. In: IEEE Visual Communications and Image Processing (VCIP 2012) , 27-30 November 2012 , San Diego, CA, United States. pp. 1-6.. ISBN 978-146734405-0 (Published)

M. Z., Yusoff and A. M., Mohseen and A., Al-Falahi and N. H., Shuaib (2012) The Effects of Area Contraction on Shock Wave Strength and Peak Pressure in Shock Tube. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 587-596. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

M.A., Mokhri and N.R., Abdullah and S.A., Abdullah and S., Kasalong and R., Mamat (2012) Soot Filtration Recent Simulation Analysis in Diesel Particulate Filter (DPF). Procedia Engineering, 41. pp. 1750-1755. ISSN 1877-7058. (Published)

M.Shahrinnahar, Abd Latib (2012) Dua universiti jalin kerjasama. Utusan Melayu .

Ma, Xiuqin (2012) New Parameter Reduction of Soft Sets. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norrozila, Sulaiman).

Ma Umaira Suhaddha, Zainal Abidin (2012) Solvent production from palm oil mill effluent (POME) by clostridium beijerinckii. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Madihah, Zubir (2012) Effect of dry machining on tool wear. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mahendran, Moorthy and Lee, Giok Chui and Sharma, K. V. and Shahrani, Anuar (2012) Performance Evaluation of Evacuated Tube Solar Collector Using Water-Based Titanium Oxide (TiO2) Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 301-310. ISSN 2231-8380 (online). (Published)

Mahyuddin, Ismail (2012) 'Kena Sihir' Sebagai Satu Pembelaan Dalam Kes Perceraian: Analisa Dari Sudut Hukum Syara' dan Pengaplikasiannya Di Mahkamah Syariah Di Malaysia. In: World Conference on Islamic Thought 2012 (WCIT 2012) , 11 September 2012 , Kinta Riverfront Hotel, Ipoh. . (Unpublished) (Unpublished)

Maisara Mohyeldin, Gasim Mohamed (2012) Six Stroke Engine Arrangement. In: 15th International Conference on Applied Mechanics and Mechanical Engineering , 29-31 May 2012 , Cairo Egypt. . (Published)

Maisara Mohyeldin, Gasim Mohamed and Lee, Giok Chui and Khirul Azhar, Anwar (2012) Experimental study on revetec engine cam performance. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-5., 36 (012014). ISSN 1757-899X (Published)

Makky, Essam A. (2012) Survey of Hospital Drains Antibiotic Resistant Bacteria for Hygiene and Health Care. In: International Conference on Chemical, Biological and Medical Sciences (ICCBMS'2012) , 25-26 August 2012 , Kuala Lumpur. pp. 1-4.. (Published)

Manikam, Ravindran (2012) Study of notch effect on the mechanical properties of modern gas pipeline. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Manoharan, M Nerranjini (2012) Improving the gas oil flow in pipelines by designing new floating technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mansor, Sulaiman (2012) Hubungan sunnah Allah dan pembinaan akhlak dalam kebangunan tamandun : analisis terhadap tamadun arab Islam zaman Rasulullah. PhD thesis, Universiti Malaya (Contributors, UNSPECIFIED: UNSPECIFIED).

Mansor, Sulaiman (2012) Kriteria Manusia Yang Menguasai Dan Dikuasai Berdasarkan Ayat-Ayat Sejarah Dalam Al-Quran: Iktibar Dalam Menghadapi Cabaran Penjajahan Bentuk Baharu. In: Conference on Colonialism and Decolonialism: Challenges and Prospects , 17-19 April 2012 , International Institute of Islamic Thought and Civilization (INSTAC), IIUM. pp. 1-22.. (Unpublished) (Unpublished)

Mansor, Sulaiman (2012) Peraturan Sebab-Musabab Di Sebalik Sesuatu Peristiwa: Tinjauan Khusus Terhadap Kebangkitan Dan Kejatuhan Masyarakat. In: Seminar kebangsaan Majlis Dekan Pendidikan IPTA 2012 , 7-9 October 2012 , The Zon Regency, Johor Bahru. pp. 1-17.. (Unpublished) (Unpublished)

Mansor, Sulaiman (2012) Tulisan Jawi Sebagai Penanda Aras Penguasaan Tamadun Islam di Nusantara : Meneladani Peranan Tamadun Islam Silam Dalam Mengukuhkan Penggunaan Tulisan Jawi. In: Seminar Kebangsaan Tulisan Jawi & Teknologi , 18 October 2012 , Universiti Malaysia Pahang. pp. 1-9.. (Unpublished) (Unpublished)

Maryudi, M. (2012) Degradation of high density polyethylene containing manganese carboxylates as pro-degradant additives under artificial and natural weathering. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Marziah, Ramli (2012) CMLHS lives up to expectation. Ilham, 9 . p. 18. ISSN 1985-157X

Maslinda, Johanis (2012) Study of fire damaged concrete structure. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mazlan, Abu Seman and Feng, Yun Tian and Zainorizuan, Mohd Jaini and Nasly, Mohamed Ali (2012) Transformer Explosion and Impact on the Reinforced Blast Wall. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 29-33. ISSN 2180-2742. (Published)

Mazlina, Abdul Majid and Ananthi, Krishnasami Masitry and Herawan, Tutut (2012) A Design of Educational Multimedia Software for Disability: A Case Study for Deaf People. In: The International Conference on Modeling and Simulation 2012 (MAS 2012) , 28-30 November 2012 , Jeju, Korea. pp. 1-8.. (Unpublished) (Unpublished)

Mazrul Nizam, Abu Seman and Khayet, M. and Hilal, N. (2012) Comparison of two different UV-grafted nanofiltration membranes prepared for reduction of humic acid fouling using acrylic acid and N-vinylpyrrolidone. Desalination, 287. pp. 19-29. ISSN 0011-9164. (Published)

Md Khusairi, Baharun (2012) The study local level supply in Malaysia construction industry : strategies in improvement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Md. Ashikur, Rahman Khan and M. M., Rahman and K., Kadirgama and A. R., Ismail (2012) RSM model to evaluate material removal rate in EDM of Ti-5Al-2.5Sn using graphite electrode. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012016). ISSN 1757-899X (Published)

Md. Noor, Arifin (2012) 35 sukarelawan FKKSA timba pengalaman jayakan persidangan gas sedunia 2012. CREATE . p. 32. ISSN 1823-7487

Mellisa, Abdullah (2012) Production and characterization of protein extract from lempoyang ginger. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Meor Airol Shafiq, Meor Shamsuddin (2012) Cost effective comparison between concrete and steel composite structure for 2 storeys building. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mimi Ilani, Mispun (2012) KK3 students mailing system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mimi Rabita, Abdul Wahit (2012) Mahasiswa UMP berbakti kepada masyarakat. Berita Harian .

Ming, Tie and Tian, Cheng Hock and Zahrizan, Zakaria and Ideris, Zakaria (2012) Application of Probabilistic Analysis in Finite Element Modeling of Prestressed Inverted T-Beam with Web Openings. Research Journal of Applied Sciences, Engineering and Technology, 4 (4). pp. 350-366. ISSN 2040-7467. (Published)

Mior Ahmad Khushairi, Mohd Zahari and Jailani, Salihon (2012) Factors Affecting Poly(3-hydroxybutyrate) Product Ion from Oil Palm Frond Juice by Cupriavidus Necator (CCUG52238T). Journal of Biomedicine and Biotechnology, 2012. (Published)

Mior Ahmad Khushairi, Mohd Zahari and Jailani, Salihon (2012) Renewable Sugars From Oil Palm Frond Juice as an Alternative Novel Fermentation Feedstock for Value-Added Products. Bioresource Technology, 110 (April ). pp. 566-571. ISSN 0960-8524. (Published)

Mior Ahmad Khushairi, Mohd Zahari and Hidayah, Ariffin and Mohd Noriznan, Mokhtar and Jailani, Salihon and Shirai, Yoshihito and Mohd Ali, Hassan (2012) Factors affecting poly(3-hydroxybutyrate) production from oil palm frond juice by cupriavidus necator (CCUG52238 T). Journal of Biomedicine and Biotechnology, 2012 (125865). pp. 1-8. ISSN 1110-7243. (Published)

Mohaimeen, Najib (2012) Development of load balanced inverter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohamad Al Rassid, Mohamad Borhanudin (2012) A new material supply mechanism for plunger type injection molding. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Alif, Mohd Nasir (2012) Development of flexural structure for chatter machining testing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Azman, Poniran (2012) Temperature distribution and heat flow in cylindrical fin with heat source. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Fadli, Zolkipli (2012) A framework for malware identification based on behavior. PhD thesis, Universiti Sains Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Faiz, Mohamed Yatim (2012) A study of interlayer gallery of modified sodium montmorillonite (MMT) nanofiller using ion exchange and surfactant method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Faza Firdaus, Mohd Rashid (2012) Design and fabrication of display unit for exploded components of single cylinder 4 stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Firdaus, Basrawi (2012) Performance analysis and optimization biogas-fuelled cogeneration systems in sewage treatment plants. PhD thesis, Kitami Institute of Technology, Hokkaido, Japan (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Firdaus, Mohamad Ghazali (2012) Synthesis and characterization of cobalt supported TiO2 with Mn/Zn/Zr promoters for fischer tropsch synthesis. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohamad Hafiz, Mohamad (2012) A new multipurpose soap dispenser prototype using design for manufacturing (DFM) approach. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Heerwan, Peeie (2012) Skid control of small electric vehicle with hydraulic-mechanical hybrid brake system. Masters thesis, School of Engineering (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Hilman, Mohamed Sabri (2012) Open channel flow analysis of drains at Universiti Malaysia Pahang campus Pekan using Infoworks CS. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Mohamad Hushairy, Abdul Jalil (2012) Simulation of performance of air conditioning system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Irsyad, Mohamad Mazuki (2012) Effect of Different Mesostructured Material Based On Silica (Tio2, Sba-15 And Cab-O-Sil) As Cobalt Supports For Fischer-Tropsch Synthesis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Izhar, Mohd Samin (2012) Cultivating conditions influence invertase production by Aspergillus Niger in submerged culture. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohamad Izwan, Abdul Ghani (2012) Comparison of erosion corrosion of titanium and stainless steel in seawater. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Izwan, Ghazali (2012) Design, fabricate and testing small rocket motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Jazmir Hassan, Mohamed (2012) Experimental and finite element evaluation of bending for stainless steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Kamal Hilmi, Mohd Rafi (2012) Energy management for a series hybrid electric vehicle (HEV). Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohamad Muhaimin, Zalani (2012) Encapsulation of therapeutic protein within polymeric nanofiber using co-axial electrospinning. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohamad Norahiman, Abdurahman (2012) Adsorption Studies of Synthetic Batik Dye Using Granular Activated Carbon in Continuous System. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Normazuan, Mustafa (2012) Design, analysis and fabricate small cross flow turbine for Sungai Pahang. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Ridhwan, Raja Mohd (2012) Design, fabrication and testing of small scale turbine jet engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Rizza, Othman and Hadya, L. and Repke, J.-U. and Wozny, G. (2012) Introducing Sustainability Assessment and Selection (SAS) into Chemical Engineering Education. Education for Chemical Engineers, 7 (3). pp. 118-124. ISSN 1749-7728. (Published)

Mohamad Sazuan, Sarifudin (2012) Design and analysis of car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Shariff, Ramli (2012) Waste minimization by recycling construction waste. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohamad Syahmi, Shahrom (2012) Taguchi method approach on effect of lubrication condition on surface roughness in milling operation. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Yusup, Abd Wahab (2012) Development of PCA-Based Fault Detection System Based on Various of NOC Models for Continuous-Based Process. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Zairi, Baharom and M. Z., Nuawi and Priyandoko, Gigih and S. M., Harris (2012) Eddy Current Braking Experiment using Brake Disc from Aluminium Series of A16061 and A17075. IOP Conference Series: Materials Science and Engineering, 36 (1). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Mohamad Zaki, Hamsah (2012) Corrosion behaviour of heat threated carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Zulfadli, Mohamad Rani (2012) Determination of burst pressure of defective steel pipes using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Zulhelmi, Man (2012) Kuala Lumpur Inner City Transport System (KLICTS). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Mohamed Fareez, Jafri (2012) Synthesis of biopetrol from rubber seed oil using zeolite catalyst using cracking process. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Mohamed Reza Zalani, Mohamed Suffian and A. R., Yusoff and Muhammad Adib, Shaharun (2012) Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-7., 36 (012044). ISSN 1757-899X (Published)

Mohamed Zulqarnain, Mohamed Akram (2012) Ductile fracture strain in uniaxial tensile test of plane specimen’s. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Adam, Azman (2012) The reliability of cube compressive strength test to monitoring the 7 and 28 day concrete strength. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohammad Affendy, Omardin (2012) Teknologi Taman di atas bumbung serlah bangunan mesra alam. CREATE . pp. 50-51. ISSN 1823-7487

Mohammad Farhan, Othman (2012) Analysis and prediction of micro injection molding part using moldflow simulation software. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohammad Iskandar, Othman (2012) Analysis of blood flow in 3d heart valve model under steady state condition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Muaz, Nordin (2012) Design and developement of semi automatic canting tool (body design and mechanism). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohammad Naqib Amirul, Abdul Rashid (2012) Development of diesel engines cooling system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Norshim, Mohamed Hashim (2012) Development of solid rocket propellant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Rafiq, Radzuan (2012) Design and fabricate a gantry type of co2 laser cutting machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad S., Hassan and Nurul Wahidah, Arshad and Kamarul Hawari, Ghazali and Rosyati, Hamid (2012) Data acquisition process for intelligent traffic light using vision sensor. In: 4th International Conference on Computational Intelligence, Modelling and Simulation (IMSim 2012) , 25-27 September 2012 , Kuantan, Pahang Darul Makmur. pp. 54-59.. ISSN 21668523 (Published)

Mohammad Safuan, Mat Noor (2012) Molecular Dynamics Simulation of Ibuprofen Crystal Polymorph. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Shahidil Saffuan, Rosli (2012) Design and development of android application of bernoulli equation ebook and calculator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammed Adam Ibrahim, Fakharaldien and Khalid, Edris and Jasni, Mohamad Zain and Norrozila, Sulaiman (2012) Efficient Mapping XML DTD to Relational Database. ASTL: Ubiquitous Computing and Multimedia Applications, 7. pp. 22-29. ISSN 2287-1233. (Published)

Mohd, Nasrullah and Singh, Lakhveer and Zularisam, A. W. (2012) Treatment of Sewage by Electrocoagulation and the Effect of High Current Density. Energy and Environmental Engineering Journal (EEEJ), 1 (1). pp. 27-31. ISSN 2227-3344 . (Published)

Mohd, Nasrullah and Zularisam, A. W. and Fadzil, Mat Yahaya (2012) Sewage Water Treatment by Electrocoagulation Process. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 41-45. ISSN 2180-2742. (Published)

Mohd, Yusri and Tsuchiya, Kazuyoshi and Kajiwarad, Kagemasa and Kimura, Minoru (2012) Fluctuation of salivary α-amylase affected by the time change of injection. In: IEEE International Symposium on Micro-NanoMechatronics and Human Science (MHS) 2012 , 4-7 Novemver 2012 , Nagoya, Japan. pp. 24-28.. ISBN 978-1-4673-4813-3 (Published)

Mohd 'Izzat, Mat Hassan (2012) Portable trip distance calculator. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohd Abu Zar, Bahri (2012) Improvement of a pre fabricate biogas digester tank. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Adzlan, Mohd Azmi (2012) Experimental & numerical study on sheet metal lateral bending with both ends pinned. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aedlan, Nur Ahmad (2012) Esterification of Acrylic Acid With 2-Ethyl Hexanol Over Sulfated Ferum Promoted Zirconia. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Afif, Abdullah (2012) Analysis of nail withdrawal strength in roof system. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Aizad, Aziz (2012) Road accident study by using GIS application along FT 2 Kuantan - Maran (KM 1 - KM 57). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Aizat, Mohd Hanif (2012) Geographical information system on logistics management for industrialized building system. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Akram, Abdul Razak (2012) TNC (A&A) terima tauliah Penolong Pesuruhjaya Kehormat JPAM. CREATE . p. 29. ISSN 1823-7487

Mohd Al-Adham, Ismail (2012) Engineering properties of laterite aggregate as coarse aggregate replacement in concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Ali Amri, Muhammad Hassan (2012) Mechanical properties of the acrylonitrile- butadienne- styrene (abs) – mixed recycled abs. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Alias, Ahmad (2012) Synthesis, characterization and catalytic activity of Ni supported on bleaching clay. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Mohd Amin, Mad Saad (2012) Design and analysis of modular wheelchair for usage of handicap people. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Amirol Redzuan, Mat Rofi (2012) Data clustering using max-max roughness and its application to cluster patients suspected heart disease. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Amirul Husaini, Saat (2012) Measurement and numerical simulation of internal air flow in faculty of mechanical engineering admin office ventilation system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Asri, Ibrahim (2012) A simplification of reading fluid properties using Microsoft Excel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Asyrak, Deraman (2012) Banana peels as an alternative source of sugar production. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Mohd Azfadir, Mat Daud (2012) Process damping technique for aluminium alloy at low speed machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azhar, Sahwan and Mohd Nizam, Ab Rahman and Baba, Md Deros (2012) Barriers to implement lean manufacturing in Malaysian automotive industry. Jurnal Teknologi (Sciences and Engineering), 59 (2). pp. 107-110. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Azim, Abdul Halim (2012) Upper and lower river physico-chemical characteristics of Pahang river : a baseline study. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Mohd Azimie, Ahmad (2012) Investigating the Performance of OKRA - Natural Mucilage Compounds as Flow Improver in Pipelines Carrying Liquid – Solid Solution. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azizul Hafiz, Abdul Sani (2012) Mig welding of dissimilar metal (steel and aluminium). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azmi, Sitam (2012) Reduction of diesel exhaust emission by using first stage seawater spray system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azrin, Mohd Arif Fadzillah (2012) Development of single station lightning detection system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Azrul Hisham, Mohd Adib and A. R., Ismail and F., Adnan and K., Kadirgama and H. A., Salaam and Zulkifli, Ahmad@Manap and Nasrul Hadi, Johari and Zulfika, Anuar and N. S. N., Azmi (2012) Computational analysis on performance of thermal energy storage (TES) diffuser. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-6., 36 (012015). ISSN 1757-899X (Published)

Mohd Azrul Hisham, Mohd Adib and K., Kadirgama and N.H, Mohd Hasni and K., Osman and O., Maskon (2012) Prediction of Blood Flow Velocity and Leaflet Deformation Via 2D Mitral Valve Model. Journal of Mechanical Engineering and Sciences (JMES) , 2, Jun. pp. 217-225. ISSN 2231-8380 . (Published)

Mohd Azrulnizam, Abd. Aziz (2012) Investigation of machining performance of coated alumina cutting tool insert with sand blasting surface pretreatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azwan, Mohd Saderi (2012) Biopetrol synthesized from rubber seed oil by zeolites catalyst : effect of operating temperature in cracking process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Azwan, Ramlan (2012) GSM car security system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohd Bijarimi, Mat Piah and Sahrim, Ahmad and Rozaidi, Rasid (2012) Mechanical, Thermal and Morphological Properties of PLA/PP Melt Blends. In: International Conference on Agriculture, Chemical And Environmental Sciences 2012 (ICACES 2012) , 6-7 October 2012 , Dubai, United Arab Emirates. pp. 115-117.. (Published)

Mohd Bijarimi, Mat Piah and Sahrim, Ahmad and Rozaidi, Rasid (2012) Mechanical, Thermal and Morphological Properties of Poly(lactic acid)/ Epoxidized Natural Rubber Blends. Journal of Elastomers & Plastics, 46 (4). pp. 338-354. ISSN 0095-2443 (print); 1530-8006 (online). (Published)

Mohd Dzulfahizi, Mohamad Saleh (2012) One dimensional engine modeling of single cylinder four stroke engine for different cng injection strategy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Dzulkiflee, Hamzah (2012) Study on Compatibilization of Recycled Polypropylene/ Polyethylene Terephthalate Blend From Coastal Plastic Waste Using Maleic Anhydride. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Fadhlan, Mohd Yusof (2012) Pemantauan dan penilaian retak lesu ke atas talian paip gas dengan menggunakan teknologi pancaran akustik. Masters thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Fadhlan, Mohd Yusof and Ummu Kulthum, Jamaludin and S., Abdullah and Z.H., Hanafi and M.S., M. Zain (2012) Monitoring and Assessment of Acoustic Emission Signatures During Fatigue Mechanism of Api5lx70 Gas Pipeline Steel. Journal of Mechanical Engineering and Sciences (JMES), 2 (June 2). 237 -250. ISSN 2231-8380 . (Published)

Mohd Fadzil, Abdul Rahim and M. M., Rahman and R. A., Bakar (2012) Cycle engine modelling of spark ignition engine processes during wide-open throttle (WOT) engine operation running by gasoline fuel. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012041). ISSN 1757-899X (Published)

Mohd Fadzli, Mat Lazim (2012) Design and simulation of prechamber with high pressure CNG injector system for single cylinder four stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadzrul Hisyam, Badarudin (2012) Parametric study on fatique failure using crack initiation method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fahmi, Jasni (2012) Experimental determination of forced convective heat transfer coefficient with nanofluid in a plain tube. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Faizan, Jamaluddin and N., Zainol (2012) Isolation and Identification of Acetic Acid Producer from Mixed Culture of Soil and Banana Stem Waste in Anaerobic Condition. International Journal of Chemical and Environmental Engineering, 3 (2). pp. 15-18. ISSN 2078-0737. (Published)

Mohd Faizol Hafiz, Ab Majid (2012) PID controller application on cutting tool vibration in milling process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fakhrurrazi, Ishak and Nazli, Ali and Azman, Kassim (2012) Tree Induce Suction For Slope Sustainability. Applied Mechanics and Materials, 170-173. pp. 1334-1338. ISSN 1662-7482. (Published)

Mohd Farhan, Mohd Khairudin (2012) School academic management system (SAMS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Fauzan, Abdullah (2012) Determination of malathion and glufosinate-ammonium in palm oil mill effluent using high performance liquid chromatography. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Mohd Fazrul Radziff, Ramli (2012) Performance of concrete by using product waste material from palm oil (clinker and shell) as aggregate replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Fazwan, Ishak (2012) Analysis of diesel spray characteristic using single hole SAC nozzle and VCO nozzle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ferdaus, Musa (2012) Pasukan Debat UMP juara Debat Diraja Kategori BM. CREATE . p. 47. ISSN 1823-7487

Mohd Fikree, Badderi (2012) Mechanical properties of kenaf fiber reinforced concrete with different water-cement ratio. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Mohd Firdaos, Abdul Wahab (2012) Defect and maintenance on concrete in government building. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Firdaus, Kamarudin (2012) Analysis of emulsion fuel spray characterictics using optical accessible chamber. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Bajuri (2012) Modelling magnetic levitation (maglev) train. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Mahamad Ali and Baba, Md. Deros and Ahmad Rasdan, Ismail (2012) Biomechanics analysis for dominant leg during instep kicking. Jurnal Teknologi (Sciences and Engineering), 59. pp. 37-40. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Firdaus, Mohd Kamaruzaman (2012) Smart Partnership Program: Seiring Menuju Puncak Menara. Ilham, 9 . p. 18. ISSN 1985-157X

Mohd Hafiz, Ismail (2012) Characterize the mechanical properties of selected type of coastal plastic waste. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Hafizil, Mat Yasin (2012) Characterization of biodiesel as a fuel in a compression ignition (CI) engine with additives. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizil, Mat Yasin and R., Mamat and K. V., Sharma and Ahmad Fitri, Yusop (2012) Influence of Palm Methyl Ester (PME) as an Alternative Fuel In Multicylinder Diesel Engine. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 331-339. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Hafizu, Hasan Basri (2012) Experimental and analytical evaluation of bending for stainless steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizuddin, Zahari (2012) Production and separation of glucose from cellulose hydrolysates using membrane reactor. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Hafizul Hakim, Basharudin (2012) Design and fabrication of microwave oven rack at the west station food outlet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hanafi, Muhammad Sidik (2012) Research on spiral movement robot. Masters thesis, Tokyo, Japan : Takushoku University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hasbi, Ab. Rahim and Forde, Michael M. and Jenkins, Robert L. and Hammond, Ceri and He, Qian and Dimitratos, Nikolaos and Lopez-Sanchez, Jose Antonio and Carley, Albert F. and Taylor, Stuart H. and Willock, David J. and Murphy, Damien M. and Kiely, Christopher J. and Hutchings, Graham J. (2012) Oxidation of Methane to Methanol with Hydrogen Peroxide Using Supported Gold–Palladium Alloy Nanoparticles. Angewandte Chemie International Edition, 52 (4). pp. 1280-1284. ISSN 1521-3773. (Published)

Mohd Hasnun Ariff, Hassan (2012) Design of a dynamometer engine coupling shaft. Masters thesis, Universiti Malaya (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hasrul, Yaakob (2012) The effects of process parameters on concentration of pineapple fruit juice via freeze concentration technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Hassnun Saiffuddin, Mohd Mustafa (2012) Fabrication of display unit for electrical and electronic wire harness of single cylinder four stroke engine for teaching purpose. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hazil Akhtar, Mohd Ghazali (2012) Solar system for irrigation system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Haziq, Ishak (2012) Driving school information system (DriSIS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Hazwan Syafiq, Harun (2012) Analysis of refrigeration system working with nanolubricant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Helmi, Suid and Mohd Zaidi, Mohd Tumari and Muhammad Salihin, Saealal and Yasmin, Abdul Wahab and Mohd Riduwan, Ghazali (2012) Simple Pole Placement Controller for Elastic Joint Manipulator. In: 19th International Conference on Mechatronics and Machine Vision in Practice (M2VIP12) , 28-30 November 2012 , Auckland, New Zealand. pp. 116-121.. (Published)

Mohd Herzwan, Hamzah and Abdul Adam, Abdullah and Mohd Aminuddin, Ayob (2012) An Experimental Study Of Di Diesel Engine Fuelled With Emulsion Fuel. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012 , Melaka, Malaysia. . (Unpublished) (Unpublished)

Mohd Ibrahim, Shapiai and Zuwairie, Ibrahim and Marzuki, Khalid (2012) Enhanced weighted kernel regression with prior knowledge using robot manipulator problem as a case study. Procedia Engineering, 41. pp. 82-89. ISSN 1877-7058. (Published)

Mohd Idham, Rosman (2012) Investigation of surface modification on aluminum oxide using acid etching surface pretreatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ihsan, Ab Rahim (2012) Fatigue life prediction on heat treated low carbon steel and aluminium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ikram, Md Yusoff (2012) Workability and compressive strength of kenaf fiber reinforced concrete with difference water-cement ratio. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Iqbal, Abd Razak (2012) Investigation of mig welding on dissimilar thickness of metal sheets (steel and stainless steel). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Izham, Ibrahim and Aman, Jantan and Mohammad, Rasmi (2012) A Defensive Evidence Model: An Approach of Security Model for Storing Digital Evidence in Network Forensics. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 251-258.. (Published)

Mohd Izuan, Abu Samah (2012) A study on compressive strength and water absorption in cement brick using RHA as part of sand replacement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Izul Aslam, Mohd Khalit (2012) Investigation of wear behavior of cutting tool insert for ti-alloy machining using carbon coated with sic sandblasting and hf acid pretreatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Izzat, Kamarulzaman (2012) Design and development of cross flow delta-wing water turbine for Pahang river. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Kasmawi, Harun (2012) Joining of plastic by using low power CO2 laser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul, Anwar Mamat (2012) Effect of different inorganic filler on development of polyethersulfone mixed matrix membranes for 02/N2 separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Khairul Na'im, Mohd Ariffin (2012) Effect of velocity in erosion corrosion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul Nizam, Baharudin (2012) Study the Reaction Mechanism of The Production of Novel Biopolymer [Poly (3-Hydroxybutyrate) (PHB)] from the Palm Oil Seed. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Khalid, Mohd Sapuan (2012) Rental car online system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Muhaymin, Ali (2012) House decision making system by using soft set theory. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Naeemil Mahmudi, Mahmud (2012) Reducing wrinkling and tearing of deep draw part. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Najib, Razali (2012) Alumni UMP hulur sumbangan bantu ringan beban Mughirah. CREATE . p. 57. ISSN 1823-7487

Mohd Nor Afiq, Nor Hashim (2012) Design and development of high pressure natural gas injector model for single cylinder four stroke engine using matlab simulink. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Norhafizzi, Sidek (2012) Utilizing of transceiver method to identify water and oil flow regime using ultrasonic tomography. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Nur Hilmi, Mohd Nazih (2012) BMM87 bearing load on a brass pin with aluminium plates. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nurarif, Zulhemay (2012) Review the implementation waste management practices in construction work around Taman Indera Sempurna, Pekan-Kuantan, Pahang Darul Makmur. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Nurunnajmi, Amat Janji (2012) Camshaft design for a six-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Radzi, Mohd Rasol (2012) Analysis of diesel particulate matter on single cylinder diesel engine using waste plastic fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rashid, Ab Hamid (2012) Model kecemerlangan prestasi IPT berasaskan nilai teras pendekatan pemodelan persamaan struktur (PPS). Faculty of Science and Technology, Universiti Kebangsaan Malaysia.

Mohd Rashidi, Maarof and Mohd Hasbullah, Idris (2012) A Study on Conversion of Higher Sulfur Pig Iron to Ductile Iron Using In-Mold Treatment Technique. International Review of Mechanical Engineering, 6 (4). pp. 896-900. ISSN 1970 - 8734. (Published)

Mohd Rasidi, Rasol (2012) Screening of factors for biodelignification of oil palm trunk using pleurotus ostreatus. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Raz Firdaus, Ramli (2012) Design improvement of coffee maker using design for assembly (DFA) method. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Razali, Daud (2012) LRF assissted mapping and obstacle avoidance for hexapod robot Comet. PhD thesis, Chiba University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Ridwan, Sulaiman (2012) Modal analysis on dissimilar metal using different thickness (steel and aluminium). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ridzuan, Azis (2012) Synthesis and Characterization of Sba-15 and Cu/Sba-15 Catalysts for Photoreduction of Carbon Dioxide. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Ridzuan, Darun (2012) The determinants of working capital management practices Malaysian perspective. PhD thesis, Lincoln University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Ridzuan, Nordin and Liu, Chengchao and Li, Jinlin and Liew, Kong Yong and Zhu, Junjiang (2012) An Environmentally Friendly Method for the Synthesis of Nano-Alumina with Controllable Morphologies. RSC Advances, 2. pp. 8352-8358. ISSN 2046-2069. (Published)

Mohd Ridzuan, Nordin and Shafii, Salimah and Wu, Lihua and Liew, Kong Yong and Li, Jinlin (2012) Structure Determination of Chitosan-Stabilized Pt and Pd Based Bimetallic Nanoparticles by X-Ray Photoelectron Spectroscopy and Transmission Electron Microscopy. Materials Chemistry and Physics, 137 (2). pp. 493-498. ISSN 0254-0584. (Published)

Mohd Ridzuan, Baharin (2012) Data clustering using min-min roughness and its application to cluster patients suspected diabetics. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Ridzuan, Husin (2012) Investigation on intake and discharge points of main drain for Taman Desa Darul Naim, Pasir Tumboh. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Mohd Ridzuan, Nordin and Mohd Husin, Mohd Haizal and Li, Jinlin and Liew, Kong Yong and Chin, S. Y. (2012) Copper Containing SBA-15 Prepared Through pH Modification Methods and its Catalytic Activity for N2O Decomposition. Journal of South-Central University for Nationalities (Natural Science Edition), 31 (1). pp. 1-7. ISSN 1672-4321. (Published)

Mohd Ridzwan, Hj Ramli (2012) Modeling magneto-rheological damper using ANFIS method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rohaizam, Mohd Sidek (2012) Solid Phase Transformation and Stability of Carbamazepine-adipic Acid Co-Crystal. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Rosyazwan Hanif, Ishak (2012) Design and fabrication of jig for butt welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rusllim, Mohamed and Hamzah, Ahmad and Mazrul Nizam, Abu Seman (2012) State of the art of all-Vanadium Redox Flow Battery: A Research Opportunities. In: International Conference on Green Technology & Ecosystems for Global Sustainable Development 2012 (ICGTEC2012) , 28-30 May 2012 , Universitt of Tuzla, Bosnia. pp. 1-8.. (Published)

Mohd Ruzaini, Ariffin (2012) Ultrasonic assisted transesterification of palm oil with methanol using barium oxide as catalyst. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Mohd Sabarudin, Hj Sulong (2012) Prediction of grinding machining parameters of ductile cast iron using water based zinc oxide nanoparticle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Sabree Fadzlee, Jaffri (2012) Strength prediction of hollow reinforced concrete beam. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Mohd Saffririzal, Abdul Halim (2012) An integrated type of MIG torch cleaner. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Salfarulizaman, Kamarul Baharin (2012) Analysis and simulation of z-source inverter control methods. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohd Salleh, Mat Sahat (2012) Design and fabrication of a multi touch screen desktop for multipurpose usage. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shafawi, Che Ibrahim (2012) Time � frequency domain analysis of acoustic emission sginal for milling process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shafeirul Zaman, Abd Majid and Mohammad Musab, Azmat Ali and Azwin Arif, Abdul Rahim and Nor Yazi, Khamis (2012) The Development of Technical English Multimedia Interactive Module to Enhance Student Centered Learning (SCL). Procedia Social and Behavioral Sciences, 67. pp. 345-348. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Mohd Shafeirul Zaman, Abd Majid and Mohammad Musab, Azmat Ali and Azwin Arif, Abdul Rahim and Nor Yazi, Khamis (2012) The Development of Technical English Multimedia Interactive Module to Enhance Student Centred Learning (SCL). Procedia Social and Behavioral Sciences, 67. pp. 345-348. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Mohd Shafiq, Mohd Sueb (2012) Efficient cultivation of Kluyveromyces Lactis in high cell density culture in fed-batch cultivation system. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Shahir, Mohd Sarif (2012) Development of battery impedance tester. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohd Shahril, Mohd Hassan (2012) Experimental and numerical study on sheet metal lateral bending with both ends fixed. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Sham, Mohamad (2012) Compatibility conditions and nonabelian tensor products of finite cyclic groups of ρ-power order. Faculty of Science, Universiti Teknologi Malaysia.

Mohd Shazufarizal Zuhri, Zainal (2012) The waste recycling of copper phthalocyanine (CuPC). Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Mohd Sobri, Ibrahim (2012) Study of fly ash based geopolymer mortar : citric acid and sucrose as proposed natural based retarder. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Sufian, Jamaludin (2012) A study of the causes of bouncing problems of shock absorber. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Syafiq, Mohd Saufi (2012) Effect of specimen size on fracture toughness of mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syah Waliyullah Ad-Dahlawi, Mat Razali (2012) Optimization of abrasive machining of ductile cast iron using water based ZnO nanoparticles : a support vector machine approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syahidan, Mohamed Nawi (2012) Effect of aging on corrosion behaviour of AA6061 aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syazwan, Zulkipli (2012) Development of a new type of sprayer head of a water mist system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syazwan Nizam, Mohd Moni (2012) The implementation of industrialised building system in construction industry. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd U'Kasyah, Hashim (2012) Optimization of feed system design in family mould using mould flow simulation software. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Wazir, Mustafa and M. H., Sulaiman and Omar, Aliman and Siti Rafidah, Abdul Rahim and A., Azmi (2012) Optimal Allocation and Sizing of Distributed Generation in Distribution System via Firefly Algorithm. In: IEEE International Power Engineering and Optimization Conference (PEDCO 2012) , 6-7 June 2012 , Melaka, Malaysia. pp. 84-89.. ISBN 978-1-4673-0660-7 (Published)

Mohd Yusri, Shamsuddin (2012) Development of test rig for knee pad. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zafrullah, Zulkifli (2012) Fuzzy PID controller applied on milling machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zaidi, Mohd Tumari and Muhammad Salihin, Saealal and Mohd Riduwan, Ghazali and Mohd Anwar, Zawawi and L. H., Shah (2012) H-Infinity Controller Based on LMI Region for Flexible Robot Manipulator. Research Journal of Applied Sciences, 7 (5). pp. 275-281. ISSN 1815-932X. (Published)

Mohd Zaidi, Mohd Tumari and Muhammad Salihin, Saealal and Mohd Riduwan, Ghazali and Yasmin, Abdul Wahab (2012) H-infinity with Pole Placement Constraint in LMI Region for a Buck-converter Driven DC Motor. In: 2012 IEEE International Conference on Power and Energy (PECon) , 2-5 December 2012 , Kota Kinabalu, Sabah Malaysia. pp. 530-535.. ISBN 978-1-4673-5019-8 (Published)

Mohd Zaidi, Mohd Tumari and Muhammad Salihin, Saealal and Yasmin, Abdul Wahab and Mohd Riduwan, Ghazali (2012) H-Infinity Controller with LMI Region Schemes for a Lab-Scale Rotary Pendulum Crane System. International Journal of Signal System Control and Engineering Application, 5 (1). pp. 14-20. ISSN 1997-5422 (Print). (Published)

Mohd Zaidi, Mohd Tumari and Muhammad Salihin, Saealal and Kamarul Hawari, Ghazali and Mohd Riduwan, Ghazali (2012) Comparative Study of Input Shaping with Different Polarities and Modes Selection in Hybrid Control Schemes of a DPTOC System. International Journal of Systems Signal Control and Engineering Application, 5 (6). pp. 5-13. ISSN 1997-5422. (Published)

Mohd Zaidi, Mohd Tumari and Muhammad Salihin, Saealal and Mohd Riduwan, Ghazali and Yasmin, Abdul Wahab (2012) H∞ Controller with Graphical LMI Region Profile for Gantry Crane System. In: Soft Computing and Intelligent Systems (SCIS) and 13th International Symposium on Advanced Intelligent Systems (ISIS 2012) , 20-24 November 2012 , Kobe, Japan. pp. 1397-1402.. ISBN 978-1-4673-2742-8 (Print); 978-1-4673-2743-5 (Online) (Published)

Mohd Zamri, Mohd Kama (2012) A study of humidity effect toward the quality of air from air conditioning system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zuki, Salleh and Najihah, Mohamed and Rozieana, Khairuddin and Najiyah Safwa, Khasi’ie and Roslinda, Nazar and Pop, Loan (2012) Free Convection over a Permeable Horizontal Flat Plate Embedded in a Porous Medium with Radiation Effects and Mixed Thermal Boundary Conditions. Journals of Mathematics and Statistics, 8 (1). pp. 122-128. ISSN 1549-3644 . (Published)

Mohd Zulfadli, Juhari (2012) California Bearing Ratio (CBR) improvement of Kuantan clay subgrade by using high density polyethylene (HDPE) as stabilizer. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Zulhilmi, Abdul Rahim (2012) The effect of limestone aggregate on the properties of fly ash based geopolymer concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Zulkifli, Mohd Nor (2012) Study on workability and strength of fresh and hardened concrete containing various percentage of chipboard waste. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd. Hafiz, Baharuddin (2012) Development of a stingray robot. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohd. Norhisham, Abdullah (2012) CERRM, JPS anjur seminar bincang kepentingan pengurusan air. CREATE . p. 24. ISSN 1823-7487

Mokhtar, Abdullah and M. R., Abdul Hamid and Zainol, Mustafa and Nooreha, Husain and Fazli, Idris and Nur Riza, Mohd Suradi and Wan Rosmanira, Ismail (2012) Value-Based Total Performance Excellence Model: A Conceptual Framework for Organisations. Total Quality Management, 23 (5). pp. 557-572. ISSN 1478-3371. (Published)

Mong, Bee Tong (2012) Outdoor-indoor corrosion of AISI 1010 steel in UMP Pekan. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Moniruzzaman, M. and Rakib, M. M. and Matin, F. T. (2012) Cr-Ni Alloy Electrodeposition and Comparison with Conventional Pure Cr Coating Technique. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 692-700. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Morina, Mohd Selih (2012) Optimization of statin (Simvastatin) by monascus Purpureus FTC 5356 in solid-state fermentation. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Mount, Nick J. and Abraharta, Robert J. and Dawson, Christian W. and Ngahzaifa, Ab. Ghani (2012) The need for operational reasoning in data-driven rating curve prediction. Hydrological Processes, 26 (26). pp. 3982-3400. ISSN 0885-6087. (Published)

Mr, Handrizal and Mr, Muhammad Zarlis and Noraziah, Ahmad and Abdalla, Ahmed N. (2012) An Improved of Channel Allocation for WLAN Using Vertex Merge Algorithm. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 205-213.. (Published)

Muhamad Ahnaf, Mohd Abd. Ghafar (2012) Water and oil flow regime identification using transmission-mode ultrasonic tomography. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Muhamad Aliff, Ramli (2012) Purification of fructosyltransferase (FTase) from Aspergillus Niger to enhance production of Fructooligosaccharides (FOS) as a food additive. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhamad Amin, Ab Rasak (2012) Design and fabrication of drain cover by casting process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Arifpin, Mansor and A., Ohsato and S., Sulaiman (2012) Knowledge Management for Maintenance Activities in the Manufacturing Sector. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 612-621. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

Muhamad Arifpin, Mansor and L. H., Shah and Hazami, Che Hussain (2012) Maintenance Performance of Malaysia's Automotive Sector: A Case Study. In: Proceedings of International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 271-275.. (Published)

Muhamad Aslam, Kamarudin (2012) Design and fabrication of go-kart chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Azman, Mohd Yamin (2012) Multi dimensional modelling of a high pressure natural gas fuel injection process in prechamber of a single cylinder four-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Azrul, Amir (2012) Effect of solution treatment temperature on microstructure and mechanical properties of a356 alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Edham, Saharudin (2012) Conceptual design of glass recycling machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Fadhli, Zainuddin (2012) MIG welding of dissimilar metal using different thicknesses (aluminum and mild steel). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Fahrid, Abd Wahid (2012) Design and fabricate of high sensitivity sensor holder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Faizal, Abd Ghani (2012) Comparative study of the strain signal and the edited strain signal. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Hafizuddin, Ismail (2012) Design and development of android application of gear design ebook and calculator. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhamad Hafizzan, Muhamad Zaidi (2012) Performance of concrete using aggregate laterite as aggregate replacement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhamad Hanif, Muhamad (2012) Effect of microstructure on plain strain fracture toughness of carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Khairul Hakimi , Hamid (2012) Computational analysis study of aerodynamic vehicle passenger car (front grill). Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhamad Khusairi, Hassim (2012) Finite element analysis of electromagnet actuator for non-contact modal testing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Moza, Muhamad Mohtar (2012) Maximizing Paper Fibre Recovery Using Property Cascade Analysis Technique. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Nasruldin, Hashim (2012) Implementation of single minute exchange die (SMED) technique to accelerate the mold changing time at sme company. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Nurzami, Ab Sota (2012) Water injection system design for six stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Sahddam, Mohd Rozani (2012) Perpetual motion magnetic elevation toy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Saiful Zakwan, Ramlan (2012) Effect of pre-strain on mechanical properties of low carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Shyamir Al Amar , Muhamad Tobib (2012) The effect of using quarry dust as a sand replacement material on compressive strength of concrete /. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Muhamad Solehin, Daud (2012) Design and analysis of urban concept car chassis for shell eco-marathon challenge. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Syafiq, Kadiran (2012) Charging and discharging methods of lead acid battery. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhamad Syafiq Eidham, Ab Rashid (2012) Production of extracellular tannase enyzme by Aspergillus Niger. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhamad Zahrul, Ghazali (2012) Transesterification of palm oil with methanol using barium oxide. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad, Mohd Noor (2012) Cost reduction study of automotive part using dfa method : car seat. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad, Rauf (2012) Design of real time intelligent buses notification system for passengers. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: N Abdalla,, Ahmad).

Muhammad @ S. A. Khushren, Sulaiman (2012) Water level forecasting model using improved artificial neural network architecture. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Adib, Ismail (2012) Performance of concrete with rice husk waste under different environments. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Adib, Shaharun and Mohamed Reza Zalani, Mohamed Suffian and A. R., Yusoff and Khairul Azha, Abd Jalal (2012) Performance of process damping in machining titanium alloys at low cutting speed with different helix tools. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (1). ISSN 1757-899X (Published)

Muhammad Adnin, Mat Bahari (2012) Design, construction, and testing of an open-loop low-speed wind tunnel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Afandi, Baharudin (2012) Design lab equipment tracking system using RFID. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Muhammad Afiq Naquiddin, Abd Rahman (2012) Modeling the magneto- rheological damper using recurrent neural network method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Aiman, Umar (2012) Development of web-based solar pv powered weather station. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Muhammad Alif Afnan, Ramli (2012) Production and Characterization of Polymer Blend From LDPE and Starch. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Aliff Nazreen, Norazmi (2012) Multiple objective optimization of electrical discharge machining on titanium alloy using grey relational analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Amirul , Miskon (2012) Study on the composition of municipal solid waste in Mahkota Aman residential area. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Muhammad Azhar , Mohd Yunus (2012) Synthesis, characterization and structure determination of novel chromium hexacarbonyl derivatives via substitution with various group 15 complex ligands (L) where L = ethylenebis diphenyl-arsine, P-bromophenyl diphenylphosphane, bis (diphenylphosphino) hexane, bis (diphenylphosphino) pentane, and triphenylarsine. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Muhammad Azim, Rozali (2012) Designing a good manufacturing practices (GMP) certified manufacturing unit for halal products in Gambang. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Azizuddin , Mohd Haris (2012) Leachate treatment using limestone and subsurface flow constructed wetland. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Azlan, Nazeri (2012) Optimization of bacterial cellulose production by using response surface methodology(RSM)effect of PH,temperature and concentration of fermentation medium. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Azlan , Ahmad (2012) Speaker localization for human-machine interaction. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Muhammad Azli, Shukri (2012) Ebook UMP Publisher from traditional to digital world. Quest, 8 (5). p. 12. ISSN 1985-8159

Muhammad Azli, Shukri (2012) Peluang staf bukan akademik dalam penerbitan melalui Penerbit UMP. UMP Press, Universiti Malaysia Pahang. (Unpublished)

Muhammad Azli, Shukri (2012) UMP Publisher's new office. Quest, 8 (5). p. 6. ISSN 1985-8159

Muhammad Azwan, Zainol Abidin (2012) Experimental validation for chatter stability prediction. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Danial, Mazelan (2012) Synthesis and swelling behaviour of bentonite based superabsorbent polymer composite. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Fadhli, Othman (2012) Design and fabricate gas stove stand and extractor hood stand. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Fadhlul Hanin, Ismail (2012) Optimization of Biodiesel Production from Cooking Palm Oil Using Response Surface Methodology (RSM) Approaces. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Fahmi , Jasri (2012) Investigation of machining performance of the coated carbide cutting tools with acid etching surface pretreatment. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Faisal, Siddiqui (2012) The Anti-Biofouling Effect of Piper Betle Extract on Membrane Biofouling in Bioreactor for Batik Wastewater Treatment. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Faisal, Siddiqui and Mimi Sakinah, A. M. and Singh, Lakhveer and Zularisam, A. W. (2012) Targeting N-acyl-homoserine-lactones to Mitigate Membrane Biofouling based on Quorum Sensing using a Biofouling Reducer. Journal of Biotechnology, 161. pp. 190-197. ISSN 0168-1656. (Published)

Muhammad Faiz Nor, Mohd Fozi (2012) Investigation and experimental work on power generation by piezoelectric devices. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Farhan, Abd. Karim (2012) Traffic calming study : the effectiveness of various types of speed humps. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Muhammad Farhan, Zainuddin (2012) Development of portable PV generated power supply. Faculty of Electrical & Electronics Engineering , Universiti Malaysia Pahang.

Muhammad Farhan, Kamarul Zaman (2012) The development of multi level buck converter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Fikri , Md Naziar (2012) Loading on aluminium rivet joint. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Firdaus, Othman (2012) Design and analysis of urban car for Shell eco marathons Asia. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Firdauz, Ali Sibramulisi (2012) Study on Production of Peg-Pvdf Membrane for Gas Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Hafidz Idham, Salahuddin (2012) Simulation of Transdermal Drug Delivery System for Breast Cancer Therapy Using COMSOL. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Hafiz, Ramli (2012) Frequency domain analysis on acoustic emission signal in bone tissues. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hafiz, Azam (2012) Experimental and finite element evaluation of bending for aluminium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hafiz Aswad, Ahmad Kamal (2012) AsarFonts enriches Jawi writing application through technology. Quest, 8 (5). p. 1. ISSN 1985-8159

Muhammad Hafiz Aswad, Ahmad Kamal (2012) Workshop on writing improvement of AsarFonts product with Dewan Bahasa & Pustaka. Quest, 8 (5). p. 9. ISSN 1985-8159

Muhammad Hafiz Aswad, Ahmad Kamal and Noor Syahidah, Sabran (2012) Seoul International Invention Fair (SIIF 2012) @ COEX Exhibition Centre, Seoul, Korea, 29 Nov - 02 Dis 2012. Quest, 8 (5). p. 8. ISSN 1985-8159

Muhammad Hafizuddin, Salim (2012) Development of variable intake system for sparkignition engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hairynizam, Muhd Taib and Jolius, Gimbun (2012) Mixing of EFB Fibre - Liquid in Stirred Tank Using Intermig Impellers. In: National Conference on Postgraduate Research (NCON-PGR) 2012 , 8-9 September 2012 , Universiti Malaysia Pahang. . (Published)

Muhammad Hasbullah, Idris (2012) Wireless xbee-based energy meter monitoring system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Hayyul, Sohaimi (2012) Development controller for 2 axis mechanism machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Haziq, Sahimi (2012) Use of Carbon Nanotubes To Enhance The Physical and Mechanical Properties of Wood Composites. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Haziq, Russli (2012) Determination of glufosinate-ammonium and malathion in residue oil from palm pressed fiber using high performance liquid chromatography. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Muhammad Ikhwan, Izhar (2012) Development of autonomous underwater vehicle. Faculty of Electrical Engineering, Universiti Malaysia Pahang.

Muhammad Ikhwan, Razak (2012) Design and fabrication of steering system for electric go kart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Ikram, Mohd Rashid and Hiendro, Ayong and Anwari, Makbul (2012) Optimal HE-PWM inverter switching patterns using differential evolution algorithm. In: International Conference on Power and Energy (PECon 2012) , 2-5 December 2012 , Kota Kinabalu, Sabah. pp. 32-37.. ISBN 978-1-4673-5017-4 (Published)

Muhammad Ikram, Mohd Rashid and Suliana, Abd Ghani and Nur Yasmin, Amran and Akorede, Mudathir Funsho (2012) Experiment on Power Quality of PV-grid System at FKEE UMP. In: International Conference On Green Technology & Ecosystems for Global Sustainable Development 2012(ICGTEC 2012) , 28-30 May 2012 , University of Tuzla, Tuzla, Bosnia & Herzegovina. . (Unpublished) (Unpublished)

Muhammad Ilyas , Mohd Junaidi (2012) Effectiveness of concrete strength using artificial fine aggregates from palm oil disposal waste product. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Muhammad Imran, Anwar and Sharidan, Shafie and Khan, Ilyas and Mohd Zuki, Salleh (2012) Conjugate Effects of Radiation Flux on Double Diffusive MHD Free Convection Flow of a Nanofluid over a Power Law Stretching Sheet. International Scholarly Research Network. pp. 1-7. (Published)

Muhammad Iqbal, Mohd Azit (2012) Optimization of carbon dioxide laser cutting parameters. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Izzat Hafiz, Ayub (2012) Design and develop android application of fluid kinematics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Izzat Shazali, Mohd Ramli (2012) Simple damage model for cracked thin plate tensile test. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Izzat Shazali, Mohd Ramli (2012) Simple damage model for cracked thin plate tensile test. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Izzuddin, Masrom (2012) Analysis of electromagnetic energy harvester for various length of beam. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Khairuddin, Pawiran (2012) Preparation of copper nano lubricant for high end application. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Muhammad Khairul Anuar, Mohamed and Mohd Zuki, Salleh and Roslinda, Nazar and Anuar, Ishak (2012) Stagnation Point Flow over a Stretching Sheet with Convective Boundary Conditions. In: Simposium Kebangsaan Sains Matematik ke-20 , 18-20 Dec 2012 , Putrajaya. . (Submitted) (Submitted)

Muhammad Khairul Anuar, Mohamed and Mohd Zuki, Salleh and Roslinda, Nazar and Anuar, Ishak (2012) Stagnation Point Flow over a Stretching Sheet with Newtonian Heating. Sains Malaysiana, 41 (11). pp. 1467-1473. ISSN 0126-6039. (Published)

Muhammad Muslim , Ramle (2012) Efficiency in construction process. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Mutammimul Ula, W. Abd. Latif (2012) Fixed bed adsorption for wastewater treatment. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Na'im Nasiruddin, Abd Rasidi (2012) Design and development of android application of static fluid e-book and calculator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Naim, Othman (2012) Design and fabrication of a new free and force vibration test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Nasoha, Mohd Rashid (2012) The compressive strength and water absorption of sand brick containing lime and different percentage of RHA a partially sand replacement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Nubli, Abdul Wahab and Maziah, Mohd Sapar and Mohd Firdaus, Mohd Kamaruzaman (2012) Keberkesanan Modul LINUS Berbantukan Terapi Biofeedback EmWave Terhadap Murid-Murid, di Zon Chenor, Pahang. In: Prosiding Seminar Internasional Pasca Siswazah Pendidikan Khas UKM-UPI Siri II 2012 , 27-28 January 2012 , Universiti Kebangsaan Malaysia. pp. 110-120.. ISSN 978-983-2267-35-5 (Published)

Muhammad Nurzuhaili, Zainudi (2012) Design and development of a photovoltaic power system for automatic bean sprout. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Muhammad Qaidir, Abdillah (2012) Effect of welding parameters on mechanical properties of welded carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Qusyairi, Abdul Nasib (2012) Estimation of core loss in transformer by using finite element method. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Quyyum, Sohaimi (2012) Analysis and countermeasure to improve a low takt production item based on LPS evaluation at Hicom Teck See Sdn. Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Razif, Noor Azam (2012) Embedded sensor networks for weather monitoring in UMP Pekan. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Remanul, Islam (2012) Effect of fibre surface treatment on kenaf filled recycled polypropylene composite. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Rezduan, Othman (2012) Smart distance measurement detector. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Muhammad Rozainei, Mat Saat (2012) Al2O3 supported alkali metal oxides (LINO3) for transesterification of palm oil. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Rusydi, Robaie (2012) Production of Polymer Blend from Algae and Polyethylene Blend. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Ruzilan, Rusli (2012) Design and fabrication of home drain cover. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Safwan, Azmi (2012) Optimization of abrasive machining of ductile cast iron using nanoparticles : A multilayer perceptron approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Safwan, Taharim (2012) Modeling of crude distillation unit (CDU). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Salihin, Saealal and Mohd Zaidi, Mohd Tumari and Kamarul Hawari, Ghazali and Mohd Syakirin, Ramli (2012) Practical Sway Motion Control for Double Pendulum-type Overhead Crane System. International Journal on Smart Sensing and Intelligent Systems, 5 (2). pp. 362-380. ISSN 1178-5608. (Published)

Muhammad Shahmi, Marsahid (2012) A study of acoustic emission properties on welded A240GR 317L stainless steel using acoustic amission transmission under tensile load. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Suhaimi, Man (2012) Effect of promoters (Mn, Zn and ZrO2) on the characterization of SBA-15 supported cobalt catalyst for fischer-tropsch synthesis. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Syafik, Isa (2012) Whole body vibration on taxi driver. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq, Khirrudin (2012) Production of bacterial cellulose effect of different mediums and modes of operation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq, Razali (2012) Design and fabricate of micro spray nozzle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Syarifuddin, Rahmat (2012) Hybrid wind and solar charge controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Yazid, Mohamad Yunus (2012) Synthesis and characterization of novel organometallic chromium hexacarbonyl derivatives via ligand (L) substitution, where L = tris (3-methylphenyl) arsine, tris (M-fluorophenyl) phosphine and tris [3, 5-Bis (trifluoromethyl) phenyl] phosphine. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Muhammad Zaid, Mohamad Mohtar (2012) The effect of assist gas on the surface roughness for carbon dioxide laser cutting process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Zaki, Che Md Nor (2012) Experimental and simulation study on the effect of inner span in a four-point bending test (4pb). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zakuan, Ahmad Salim (2012) Remote RF control for home appliance development board. FACULTY OF ELECTRICAL & ELECTRONICS ENGINEERING, Universiti Malaysia Pahang.

Muhammad Zulfadhli, Md Zaki (2012) Design and analysis of a composite drive shaft for an automobile. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zulhilmi, Mohd Ithnin (2012) Feasibility study on the usage of natural gas for electricity supply at Universiti Malaysia Pahang Gambang campus. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Zulhilmi, Ali (2012) Experimental study on strength of cracked concrete column repaired by jacketing method. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mukhlish, M. Zobayer and Khan, Maksudur R. and Sumona, Paul and Mithun, Chandra Bhoumick (2012) Papaya (Carica papaya L.) Leaf Powder: Novel Adsorbent for Removal of Methylene Blue from Aqueous Solution. Water, Air and Soil Pollution, 223 (8). pp. 4949-4958. ISSN 0049-6979 (print); 1573-2932 (online). (Published)

Mumtaz, Norman (2012) Study of cavity surface effect to the plastic flow. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Munira, Abdul Razak (2012) Research forum: “developing shariah-compliant fertility treatment guideline for muslim patients”. Ilham, 9 . p. 10. ISSN 1985-157X

Munira, Abdul Razak (2012) UMP Eid Fitr Celebration. Ilham, 9 . p. 17. ISSN 1985-157X

Munirah Idayu , Mohd (2012) The effectiveness using filter based on banana peel activated carbon for industrial wastewater treatment. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Murugan, Amarchand Chordia and Jibu, Thomas and Rajagopal, Raj Kumar and Mandal, AbulKalamAzad (2012) Metabolic responses of tea (Camellia sp.) to exogenous application of ascorbic acid. Journal of Crop Science and Biotechnology, 1 (15). pp. 53-57. ISSN 1975-9479. (Published)

Mustafa Mohamed, Mustafa Mahdi (2012) Telecommuting from the company perspective:employer intention to implement telecommuting. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mustafa Saifudeen, Abdul Walid (2012) An analysis of blasius boundary layer solution with different numerical methods. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

N

N., Masngut and Harvey, Adam. P. (2012) Intensification of biobutanol production in batch oscillatory baffled bioreactor. Procedia Engineering , 42. pp. 1079-1087. ISSN 1877-7058. (Published)

N. A., Jalanni and Mazrul Nizam, Abu Seman and C. K. M., Faizal (2012) Synthesis and performance of thin film composite nanofiltration polyester membrane for removal of natural organic matter substances. ASEAN Journal of Chemical Engineering, 12 (1). pp. 73-80. ISSN 1655-4418. (Published)

N. M. Zuki, N. M. (2012) Decomposition of Manufacturing Processes: A Review. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 545-560. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

N. M. Zuki, N. M. (2012) The development of a hybrid knowledge-based system for designing a low volume automotive manufacturing environment. PhD thesis, University of Bradford (Contributors, UNSPECIFIED: UNSPECIFIED).

Nabila , Abdul Malek and Normah, Othman (2012) UMP and DRB-HICOM: A Mismatch of Expectations. In: Global Conference Academic Research (GCAR2012) , 8 - 11 June 2012 . . (Unpublished) (Unpublished)

Nabilah, Harmain (2012) Development of solar dryer system for food drying purposes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nabilah, Harmain (2012) Development of solar dryer system for food drying purposes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nabilah Farha, Fadhlullah (2012) Attendance monitoring summary report. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nadia, Salleh (2012) Extraction performance study of gaharu using microwave extraction method. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Nadia Aida, Che Mustapa (2012) Effect of Cobalt and Zinc Precursor Loading on the Catalyst Activity of Fischertropsch Synthesis. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nadia Ashikin , Zainal Bahri (2012) Nonlinear finite element analysis of steel frame. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nadiah, Mokhtar and Noor Suraya, Romali and Siti Fatimah, Che Osmi (2012) Leachate Treatment Using Limestone Filled-Tank and Constructed Wetland. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012 , 3-5 July 2012 , Meritus Pelangi Beach Resort & Spa, Langkawi, Kedah. pp. 1-11.. (Unpublished) (Unpublished)

Nadiatul Adilah, Ahmad Abdul Ghani and Mohamed, A. Shahin and Hamid, R. Nikraz (2012) Use of Evolutionary Polynomial Regression (EPR) for Prediction of Total Sediment Load of Malaysian Rivers. International Journal of Engineering, 6 (5). pp. 265-277. (Published)

Nadirah, Ismail (2012) Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nadirah, Mohd Nasir and Yusof, Hashim and Siti Fatimah, Haji Ahmad Zabidi and Rahimah, Jusoh and Ezrinda, Mohd Zaihidee (2012) Preliminary study of student performance on algebraic concepts and differentiation. In: 2nd Regional Conference on Applied and Engineering Mathematics (RCAEM-II) , 29-31 May 2012 , Eastern & Oriental Hotel Penang . pp. 1-6.. (Unpublished) (Unpublished)

Nagor Nisah, Raja Mohammad (2012) Diabetes detection system. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Naimah Mardhyyah, Che Mat (2012) Study on water quality at Sg. Pandan, Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Najibah, Anuar (2012) The study on implementation of lean production system in front disc D54T line at Sapura Machining Corporation Sdn. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Najiha, M. S. and M. M., Rahman and A. R., Yusoff and K., Kadirgama (2012) Investigation of Flow Behavior in Minimum Quantity Lubrication Nozzle for End Milling Processes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 768-776. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and M., Kamal and A. R., Yusoff and K., Kadirgama (2012) Minimum Quantity Lubricant Flow Analysis In End Milling Processes: A Computational Fluid Dynamics Approach. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 340-345. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Najjahul Huda, Hassan (2012) IBakti Siswa 1Malaysia (GBS1M). Ilham, 9 . p. 6. ISSN 1985-157X

Najwa , Durizaki (2012) Malaysian private finance initiative. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nallavadu, Asha Rani (2012) University management system in system-z mainframe (zMS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Namdar, Abdoullah (2012) Evaluation of Landslide Possibility Based on Pore Water Pressure Mechanism and Mitigation. In: The 11th International Symposium on Advanced Technology (ISAT-Special) , 30 October 2012 , Hachioji Campus, Tokyo, Japan. . (Unpublished) (Unpublished)

Nasrul Azuan, Alang and Norhaida, Ab. Razak and Ahmad Syahrizan, Sulaiman (2012) Determination of burst pressure of API steel pipes using stress modified critical strain model. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012025). ISSN 1757-899X (Published)

Nasrul Hadi, Johari and Zulkifli, Ahmad@Manap and Syifak Izhar, Hisham (2012) A Quick Glance at Numerical Modeling in Obstructed Human Airway. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 276-280.. (Published)

Nasrul Hadi, Johari and Kahar, Osman and W. M., Basri and Zamani, Ngali (2012) Effect of tracheal stenosis at different locations on airflow in the trachea and main bronchi. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 1325-1332., 1440 (1325). ISSN 0094243X (Published)

Nasyrah, Abdul Rahim (2012) Smart meter-tnb dual tariff for domestic application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nawwar Ayuni, Razali (2012) Synthesis of amorphous silica from sugar cane leaf by chemical extraction method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nazira, Mahmud (2012) FIST anjur Seminar Bioteknologi. CREATE . p. 26. ISSN 1823-7487

Nazrith, Zulkafli (2012) Experimental and analytical evaluation of bending for aluminum. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nazrul Shafeeq, Shahadan (2012) Solid phase transformation and stability of carbamazepine-saccharin co-crystal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Neer Pandi, Rhuban (2012) GRID anti-theft system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Neeta L., Lala and Rajan, Jose and M. M., Yusoff and Seeram, Ramakrishna (2012) Continuous Tubular Nanofibers of Vanadium Pentoxide by Electrospinning for Energy Storage Devices. Journal of Nanoparticle Research, 14. p. 1201. ISSN 1388-0764 (print), 1572-896X (online). (Published)

Neshabran , Ramachandran (2012) Studies of esterification using Carica papaya lipase. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Ng, Shing Shian (2012) Investigation of MIG welding to the corrosion behaviour of heat treated carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ng, Wai Loon (2012) Investigation of MIG welding to the corrosion behaviour of carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ng , Yin Boon (2012) Antibacterial activity of neem (Azadirachta Indica) extracts against multiple drug resistant (MDR) bacteria. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Ng Yee, Shian (2012) Malaysia tour package website using rule-based expert system. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Ngahzaifa, Ab. Ghani (2012) An evaluation of the potential of adaptive neuro-fuzzy inference system in hydrological modelling and prediction. PhD thesis, University of Nottingham (Contributors, UNSPECIFIED: UNSPECIFIED).

Ngu Ming, Tiong (2012) Development of an Extractive Reactor Block in the Aspen Plus Simulator. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nidzamuddeen, Ishak and Abdalla, Ahmed N. and Noraziah, Ahmad (2012) Sustainable Energy Efficiency Implementation in Building. In: International Conference On Green Technology & Ecosystems for Global Sustainable Development 2012(ICGTEC 2012) , 28-30 May 2012 , University of Tuzla, Tuzla, Bosnia & Herzegovina. . (Published)

Nik Aloesnita, Nik Mohd Alwi and Adams, Rebecca and Newton, Jonathan (2012) Writing to Learn Via Text Chat: Task Implementation and Focus on Form. Journal of Second Language Writing, 21 (1). pp. 23-39. ISSN 1060-3743. (Published)

Nik Fatihaf, Nek Kamarzaman (2012) Photocatalytic Reduction of Co2 Using Zns Pillaring on Kaolin Catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nik Fazdrul, Nik Hussin (2012) Study on gas flow network analysis at Shah Alam Industrial area by using Cox's method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nik Izyani, Nik Nordin (2012) EPT workshop. Ilham, 9 . p. 7. ISSN 1985-157X

Nik Mohamad Yusof, Nik Mahmud (2012) A study of acoustic emission testing on mild steel MIG welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Mohd Farid, Nik Ibrahim (2012) Development of smart pv travel phone charger. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nik Nor Aziati, Nik Abd Aziz and Mimi Sakinah, A. M. and Noraziah, Abu Yazid (2012) Review: Glycerol Residue And Pitch Recovered From Oleo Chemical And Biodiesel Waste Industries. In: 2nd International Conference on Chemical, Biological and Environment Sciences (ICCEBS'2012) , 30 June-1 July 2012 , Bali Indonesia. . (Unpublished) (Unpublished)

Nik Nur Farah Ayu , Che Hamid (2012) Health care monitoring using wireless sensor network (H-Caring). Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nik Nur Zanaryah, Nik Hassan (2012) The effect of different coupling agent on zeolite modification for development of polyetehersulfone mmms for O2/N2 separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nik Nurul Ilani , N Redzauddin (2012) A study on effect of 4% total solid for biogas production from wastewater in anaerobic digestion at Indah Water Konsortium (IWK) treatment plant. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nik Rohani, Nik Mustapa (2012) Synthesis and characterization of ZSM-5 zeolite as catalyst in Claisen-Schmidt condensation reaction. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nik Shamim Uzaini , Nik Zulkiffli (2012) Membrane bioreactor for sewage treatment. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Nik Zuraida, Imran Adly (2012) Honeycomb ribs design on overcoming part warping. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nina Nadia, Sahim (2012) A study of performance analysis of fan coil unit system for FKM's air conditioner. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nithiya, Arumugam (2012) Improving the flow of petroleum products in pipelines using natural additives and powders. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hyder A., Abdul Bari).

Noor Aifadilah, Junoh (2012) The effect of number of coils on electromagnetic for energy harvester. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Ain Izzati, Rahim (2012) Wind turbine charge controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Noor Alia Atiqah , Ahmad Rohaidi (2012) The comparison between universal soil loss equation (USLE) and revised universal soil loss equation (RUSLE) for annual soil loss estimation at construction site. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Noor Amira Syuhada, Mahamad Salleh (2012) Fish detection based on echogram. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Noor Ashikin, Ohyanuddin (2012) Investigating the effect of gas flow on the drag reduction performance in multiphase flow system. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Noor Ashila, Ramle (2012) Possibility of using waste tire composites reinforced with oil palm frond as construction materials. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Noor Asikin, Ahmad Safri (2012) Study on extraction kinetics and formulation of natural mosquito repellent solution from marigold flower extracts. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Noor Asyiq, Mohd Johari (2012) Industrialised building system versus conventional system in waste production toward sustainability in construction. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Noor Atikah, Mohd Badruddin (2012) Separation of oil and water using sugarcane bagasse. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Noor Azirhan , Sahat (2012) The challenges of green building implementation in Malaysia. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Noor Azlinna, Azizan and Lee, Chia Kuang and Zeenat, Ahmed (2012) Forecasting Portfolio Risk Estimation by Using Garch and Var Methods. Research Journal of Finance and Accounting, 3 (11). pp. 62-69. ISSN 2222-1697 (Print); 2222-2847 (Online). (Published)

Noor Farahin, Sazali (2012) Development of PVDF Membrane with PEG Coating for CO2 and CH4 Gas Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Fatihah , Mazlam (2012) Enhancement of stemming process for malay illicit web content. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Hartini, Shamsudin (2012) School asset management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Noor Hidayah , Muhamad Jamil (2012) Bridge management system : review on current system and a case study. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Noor Nabilah , Mazlan (2012) The environmental benefits of reusing wastewater in landscape watering. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Noor Safiah, Sohame @ Suhaimi (2012) Fluoride and organic matter removal from groundwater using nanofiltration membrane. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Noor Shafika Syuhada, Rosli (2012) Applying Jakob Nielsen's rules on Kor Suksis UMP portal (KSUP). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Noor Shida , Mohd Noor (2012) Improving leachate treatment by using limestone filtration and free water surface constructed wetland. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Noor Suraya, Romali and Nadiah, Mokhtar and Siti Fatimah, Che Osmi (2012) A Study on the Effectiveness of Biofilter Based on Effective Microorganism (EM) and Empty Fruit Bunch (EFB) for Water Quality Improvement: An Application in Open Channel System. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012 , 3-5 July 2012 , Meritus Pelangi Beach Resort & Spa, Langkawi, Kedah. pp. 1-12.. (Published)

Noor Suzana, Bakar (2012) Characterization and process optimization of Collocalia Fuciphaga extract. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Noor Syafika, Jamaludin (2012) Task reminder system via sms. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Noor Syahidah, Sabran (2012) Bio Malaysia 2012 at Kuala Lumpur Convention Centre. Quest, 8 (5). p. 5. ISSN 1985-8159

Noor Syahidah, Sabran (2012) British Invention Show (BIS) 2012 @ Barbican Exhibition Centre, London, United Kingdom. Quest, 8 (5). p. 4. ISSN 1985-8159

Noor Syahidah, Sabran (2012) MUCET 2012. Quest, 8 (5). p. 15. ISSN 1985-8159

Noor Syahidah, Sabran (2012) UMP Gallery. Quest, 8 (5). p. 10. ISSN 1985-8159

Noor Zalina, Razali (2012) Online student performance evaluation in system-Z mainframe. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Noor Zulia, Bahaudin (2012) Sustainability considerations in modeling and improvement of acid gas removal unit in gas processing plant. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Noorhidayad, Mohd Noh (2012) Design and fabrication of laboratory printer table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noorhidayu, Che Hasmi (2012) Effect of incinerator fly ash in cement mortar toward compressive strength and leaching characteristic. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Noormariani, Ismail (2012) Settlement of embankment treated with preloading and prefabricated vertical drain (a case study). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nor Adiella, Mohd Kamarudin (2012) The Effect of Chemical Compositions and Beating Time on The Production of Cellulosic Packaging Materials (Pulp) Using Oil Palm Empty Fruit Bunch (Efb). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Adila, Said (2012) Feasibility Study for Biodiesel Production From Crude Palm Oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Afifah , Zabidi (2012) Building defect investigation and analysis. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nor Ain Syuhada, Zuhaimi (2012) Novel method of preparation of blue crude copper phthalocyanine having the reddish shade. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nor Aini, Md Rudin (2012) Design and operation of reactive distillation for biodiesel production case study. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nor Aisahton, Junet (2012) User benefit analysis of main pedestrian bridges in Kuantan Town Centre. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nor Amalina, Hussain (2012) Preparation, Characterization And Activity Evaluation Of Multi-Component Photocatalyst Under Visible Light Irradiation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Ashikin, Sulaiman (2012) UMP terima kunjungan delegasi dari SCUN. CREATE . p. 15. ISSN 1823-7487

Nor Azlina, Ab. Aziz and Zuwairie, Ibrahim (2012) Asynchronous particle swarm optimization for swarm robotics. Procedia Engineering, 41. pp. 951-957. ISSN 1877-7058. (Published)

Nor Azmi , Badri (2012) The effect of sodium chloride (NaS1) concentration to corrosion rate. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nor Azrini, Musa (2012) Palm oil clinkers as composite materials in marshall mix design. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nor Farahiyah, Ghazali (2012) Production of omega-3 fatty acid from Nannochloropsis Sp. on the effects of carbon dioxide and light intensity. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Fatihah, Ab Ghani (2012) Control of phycocyanin production from Spirulina platensis in fed-batch reactor using mid course correction policy. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Fazleen, Mohammad Nasir (2012) Election registration system on system Z/mainframe. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nor Hafizah, Abd Rauf (2012) A study on abnormal pattern recognition using mahalanobis distance for local exhaust ventilation system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Hamizah, Ahmad Azmi (2012) UMP driver schedulling reminder system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nor Hayati, Shahidan (2012) Extraction of Stevioside from Stevia Rebaudiana Leaves Using Cellulase. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Hidawati, Elias (2012) Production of succinic acid from glycerol and glycerol waste. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Hidayah, Ahmad Nordin (2012) Adsorption of Cu(II), Zn(II) and Fe(II) using Chengal sawdust. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nor Illiana , Mohd Nor (2012) Sulphated mesoporous silica synthesized from rice husk ash for chalcone production. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nor Liyana, Mohd (2012) Tenun wastewater treatment using membrane bioreactor (MBR) with external ceramic microfiltration. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nor Liyana , Suraini (2012) Effects of pulverized fuel ash as cement replacement material toward concrete microstructure. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Nor Liyana , Suraini (2012) Effects of pulverized fuel ash as cement replacement material toward concrete microstructure. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nor Rashidah, Ahmed (2012) Removal of acrylic acid from process water by using activated carbon based coconut shell. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nor Rul Hasma, Abdullah (2012) Computational intelligence based power system security assessment and improvement under multicontigencies conditions. PhD thesis, Universiti Teknologi MARA (Contributors, Thesis advisor: Ismail, Musirin).

Nor Sabrina, Ismail (2012) UMP serah sumbangan buat asnaf Kuala Pahang. CREATE . p. 36. ISSN 1823-7487

Nor Sakinah , Abdul Shukor (2012) Automated car driver assisted : road lane detection and tracking using vision sensor. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nor Sazana, Moh Sahaimi (2012) Reading assessment system on online (RASO). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nor Shafiza, Ghazali (2012) Synthesis of ZnS-Kaolin as an application of photoreduction of CO2. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nor Suaida, Abd Wahab (2012) Development of remote real time temperature monitoring system by using wireless sensor network. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nor Suhardiliana, Sahar (2012) PBMSK anjur English Camp S.YO.K bersama pelajar MRSM. CREATE . p. 23. ISSN 1823-7487

Nor' Aqilah, Norahzan (2012) Investigating the effect of gas flow rate on the drag reduction performance in gas oil-solid gas flow system. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Norafidah, Md Yusof (2012) English-Malay-English Dictionary. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Norain, Shahrom (2012) Mercury removal from wastewater by electrocoagulation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Norain , Md Yusof (2012) Effect of wind induced on road accident along east coast expressway (ECE). Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Norain , Md Yusof (2012) Effect of wind induced on road accident along east coast expressway (ECE). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Noraini, Misran (2012) Penentu kepimpinan berorientasikan pekerja dantugas terhadap kejayaan projek di kalangan kontraktor binaan di kuantan pahang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noraisah Nurul Fatwa, Mohd Razali (2012) ICAM-DRB HICOM visit. Ilham, 9 . p. 19. ISSN 1985-157X

Noraisah Nurul Fatwa, Mohd Razali (2012) KPTM visit. Ilham, 9 . p. 19. ISSN 1985-157X

Noraisah Nurul Fatwa, Mohd Razali (2012) Young creative writers discovered! Ilham, 9 . p. 12. ISSN 1985-157X

Noraniza, Samat and Noorhuzaimi@Karimah, Mohd Noor and Rahmah, Mokhtar (2012) A Case Study of an Analysis for E-Government Web Accessibility for the Disabled in Malaysia. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 227-232.. (Published)

Norayuni, Azizi (2012) Biodegradable behaviour of polylactic acid nanocomposite based on modified nanoclay. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Noraziah, Abu Yazid and Nurul Izyani, A.M. (2012) Influence of Carbon Source and Culture Condition on Arachidonic Acid Production by Candida Krusei in Submerged Culture. In: ISAET Proceedings: 2nd International Conference on Chemical, Biological and Environment Sciences 2012 , 30 June - 1 July 2012 , Bali, Indonesia. pp. 1-4.. (Published)

Noraziah, Ahmad and Ho, Cheong Lee and Herawan, Tutut (2012) Product Design Generation and Decision Making Through Strategic Integration of Evolutionary Grammars and Kano Model. International Journal of Intelligent Information Technologies (IJIIT), 8 (3). pp. 32-55. ISSN 1548-3657 (print); 1548-3665 (online). (Published)

Noraziah, Ahmad and Zailani, Abdullah and Herawan, Tutut and Mustafa, Mat Deris (2012) Scalable technique to discover items support from trie data structure. In: 3rd International Conference on Information Computing and Applications (ICICA 2012) , 14-16 September 2012 , Chengde, China. pp. 500-507.. ISBN 978-3-642-34062-8 (Published)

Noraziah, Ahmad and Zailani, Abdullah and Herawan, Tutut and Mustafa, Mat Deris (2012) WLAR-Viz: Weighted least association rules visualization. In: 3rd International Conference on Information Computing and Applications (ICICA 2012) , 14-16 September 2012 , Chengde, China. pp. 592-599.. ISBN 978-3-642-34062-8 (Published)

Norazimah, Harun (2012) Study on mechanical characteristics of mixed heterogeneous coastal plastic waste. Faculty of the Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Norazizan, Abd Rahim (2012) Kuantan clay subgrade stabilization by using fly ash as stabilizer. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Norazlianie, Sazali (2012) Experimental & numerical study on sheet metal lateral bending with fixed and pinned ends. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norazlina, Azman (2012) 12 v - 5 v switched capacitor DC-DC converter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norazreen, Samsuri (2012) Fabricate and investigate the performance of the flow-through solar evacuated tube using water-based nanofluids. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norazura, Abdul Halim (2012) Detection and summation of pus cell for sputum quality testing. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Norazura, Ahmad and Noraida, Abdul Ghani and Anton Abdulbasah, Kamil and Razman, Mat Tahar and Aik Howe, Teo (2012) Evaluating Emergency Department Resource Capacity Using Simulation. Modern Applied Science, 6 (11). pp. 9-19. ISSN 1913-1844 (printed); 1913-1852 (online). (Published)

Norfadilah, Che Yusoff (2012) Automation of 6 wheels robot (HOBO L3A1 robot). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norfadilah, Zulkefli (2012) Direction and speed control of DC motor. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norfariza, Ab. Wahab (2012) Estimation of corrugated cardboard strength with a new tensile or shear test method. Masters thesis, Nagaoka University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhafzan, Junadi (2012) Medium-density fibreboard (MDF) from oil-palm fronds. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ghazi Faisal, Najmuldeen).

Norhaida, Ab. Razak and Ahmad Syahrizan, Sulaiman and Nasrul Azuan, Alang (2012) Interaction effect of pressurized lamination pipe by using 2D finite element analysis. In: IOP Conference Series: Materials Science and Engineering; 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012027). ISSN 1757-899X (Published)

Norhaida, Ab. Razak and Nasrul Azuan, Alang and Khairidz Azuwar, Safie and Ahmad Syahrizan, Sulaiman (2012) Finite element analysis on burst pressure of defective steel pipes. In: 19th European Conference on Fracture (ECF19) , 26-31 August 2012 , Kazan, Russia. pp. 1-9.. (Unpublished) (Unpublished)

Norhamizah, Johari (2012) Batch extraction of 1,3,7-trymethylxanthine from KKM22 cocoa seeds. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Norhaniza, Mat Saad (2012) Production and Characterization of Insulator Material From Oil Palm Empty Fruit Bunch (EFB). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norhanom, Awang (2012) The Role of Simulation in Reducing Disturbance at Production Line. International Journal of Technology Management, 1. pp. 23-32. ISSN 2289-2753. (Published)

Norhapizin, Kushairi and Rasidah, Sanusi and Yusnita, Rahayu (2012) Performance analysis of parasitic effect on distributed spiral inductor for 0.15 μm GaAs pHEMT MMIC low noise amplifier. In: sia-Pacific Conference on Applied Electromagnetics (APACE 2012) , 11-13 December 2012 , Melaka. pp. 359-362.. ISBN 978-1-4673-3114-2 (Published)

Norhartini, Kassim (2012) Extractive Reaction of Biodiesel Synthesis Using Ethanol as a Solvent : a Conversion Study. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norhaslinda, Mohd Rosli (2012) Development of electrodynamics transducer for solid particle measurement. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norhaszjana, Awang Hasan (2012) Preparation and characterization of alumina loaded titania in the photoreduction of CO2. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Norhayati, Rosli (2012) Stochastic Runge-Kutta method for stochastic delay differential equations. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhazimah, Abdul Halim (2012) Identification and optimization of process parameters for the production of bioethanol from the fermentation of oil palm trunks SAP. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhazwani, Mat Sudin (2012) Synthesis and swelling behaviour of oil palm empty fruit bunch based superabsorbent polymer composite. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Norhidaya, Summah (2012) Production of PDMS/PVDF thin film composite membrane for CO2/N2 separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Norhidayah, Muhammad and Jasni, Mohamad Zain and Md Yazid, Mohd Saman (2012) New Lightweight Identity Based Encryption Algorithm for Mobile Device: Preliminary Study. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 147-151.. (Published)

Norhidayah , Ahmad (2012) Water quality monitoring at kuantan river. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Norida, Ridzuan and Muhammad Hidayat, Musa (2012) Comparison Between Treated and Untreated Zeolite Towards the Performance of Polyethersulfone Mixed Matrix Membranes (MMMs) for O2/N2 Gas Separation. Advanced Materials Research, 550-55. pp. 728-735. ISSN 1022-6680. (Published)

Noriyani, Mohd Zin and Noraziah, Ahmad and Abdalla, Ahmed N. and Ainul Azila, Che Fauzi (2012) Solving Two Deadlock Cycles through Neighbor Replication on Grid Deadlock Detection Model. Journal of Computer Science, 8 (2). pp. 265-271. ISSN 1549-3636. (Published)

Noriyani, Mohd Zin (2012) A novel deadlock detection algorithm for neighbour replication on grid environment. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noraziah, Ahmad).

Norizam, Sulaiman and Mohd Nasir, Taib and Sahrim, Lias and Zunairah, Murat and Siti Armiza, Mohd Aris and Mahfuzah, Mustafa and Nazre, Abdul Rashid (2012) Development of EEG-based stress index. In: International Conference on Biomedical Engineering, ICoBE 2012 , 27-28 Feb. 2012 , Penang, Malaysia. pp. 461-466. (6179059). ISBN 978-1-4577-1990-5 (Print); 978-1-4577-1991-2 (Online); 978-1-4577-1989-9 (CD ROM) (Published)

Norizam, Sulaiman and Mohd Nasir, Taib and Sahrim, Lias and Zunairah, Murat and Siti Armiza, Mohd Aris and Mahfuzah, Mustafa and Nazre, Abdul Rashid (2012) Electroencephalogram-Based Stress Index. Journal of Medical Imaging and Health Informatics, 2 (3). pp. 327-335. ISSN 2156-7018 (Print); 2156-7026 (Online). (Published)

Norlailah, Lanisa (2012) Development of breast cancer detection system using digital image. Faculty of Electrical and Electronic, Universiti Malaysia Pahang.

Norleen, Isa (2012) Computational Fluid Dynamics of Advanced Gas Dispersion: Deep Hollow Blade Turbine. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norlida, Jamil and A. R., Yusoff and M. M., Hatifi (2012) Literature Review Of Electromagnetic Actuator Force Generation For Dynamic Modal Testing Applications. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 311-319. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Norlinda, Mohd Rozar (2012) The effectiveness of e-learning training in industrial safety and health:a case in FCM company. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norliyana, Erain (2012) Study on performance of partial combustion unit at direct reduction plant by using CFD. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Norliza, Ishak (2012) Formulation of melamine urea formaldehyde (MUF) resin by using various types of filler. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Norlizaa, Mohamad (2012) Design and development of wind tunnel for contraction ratio effects to the velocity and boundary layer thickness. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Normardhati, Mustafa (2012) Study on the Effect of Processing Parameters on the Extraction of Stevioside Using Soxhlet Extractor. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Normimi Fatihah, Ibrahim (2012) Adsorption Studies of Synthetic Batik Dye (SBD) Using Granular Activated Carbon (GAC) : Batch Process. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norsukmawati, Ishak (2012) Development of real-time ultrasonic sensoring system to measure distance using labview. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Norsyafiera, Nawang (2012) Analysis of control methods for buck DC-DC converter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norsyahidatul Nazirah , Ismail (2012) Factors that affect the performance of public project in Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Norsyamsul Syazwan, Mohd Nuji (2012) Analysis of diesel spray characteristic at high pressure injection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norsyazwani, Badilah (2012) Effect of radius of fillet on shear stress for cylindrical shaft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norsyeeda, Ab Alim (2012) Study of machinability on drilling austenite stainless steel 316 L1 by solid cabide tool. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Norul Fadilah, Abdullah (2012) Jengking juarai Shell Eco-Marathon Asia 2012. CREATE . p. 38. ISSN 1823-7487

Norul Fadilah, Abdullah (2012) UMP sasarkan kecemerlangan pelaksanaan Self-Assessment SETARA 11 dan D-SETARA 11. CREATE . p. 22. ISSN 1823-7487

Norul Husna, Ibrahim (2012) Fabrication of wind tunnel. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Norul Wahida, Kamaruzaman and Khairunisa, Muthusamy (2012) Effect of Curing Regime on Compressive Strength of Concrete Containing Malaysian Laterite Aggregate. Advanced Materials Research, 626. pp. 839-843. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Norul Wahida, Kamaruzaman and Khairunisa, Muthusamy (2012) Engineering Properties of Concrete with Laterite Aggregate as Partial Coarse Aggregate Replacement. International Journal of Civil Engineering and Geo-Environmental, 3 (1). pp. 47-50. ISSN 2180-2742. (Published)

Norzafirah, Jantan (2012) Study on effectiveness 3R (reduce, reuse, recycle) of solid waste among UMP students and between university technical Malaysia (UMT and UMK). Faculty of Civil and Environmental Engineering, Universiti Malaysia Pahang.

Norziatul Husna, Mohd Ridzuan (2012) Analysis on the problems faced by contractors implementing traditional and design & build contract in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur 'Atikah , Abdullah (2012) Preparation and characterization of poly (hydroxamic acid) chelating resin for metal ions removal from water. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nur Adiba, Mohd Noor (2012) Troubleshooting on Scale-Up Process of Microalgae Growth from Flask to Photobioreactor. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Adila , Mamat (2012) Speed detection of moving vehicle using normal camera. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nur Adjla, Mohamad Hafizin (2012) Study on thickness effects of low carbon steel in rapid cooling process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Afiqah Fatihah, Hamidon (2012) Effect of water content on the properties of OPS concrete containing palm oil fuel ash. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Ain, Sukri (2012) Effect of different types of solvent on extraction of phenolic compounds from cosmos caudatus. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Ain Afiqah, Abdul Latiff (2012) Analysis of diesel particulate matter of single cylinder diesel engine running on tire derivated fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Ain Ithnin , Alias (2012) Analysis of steel beam-column assemblies under column removal scenario with web opening beam. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Aishah , Omar @ Yahya (2012) Assessment of fire damaged concrete structure. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nur Aishah Amalin, Ramjis (2012) Preparation of cation-exchange membrane chromatography through modification of polyamide membrane by grafting of acrylic acid monomer. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Aisyah , Mohamad Rosli (2012) Electrochemical study of nickel nanoparticle graphene composite. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nur Akmar , Abdul Ariff (2012) Investigation of corrosion effects on galvanized steel-aluminium weld joint. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nur Aliaa, Mohd Ezanee (2012) Radio frequency identification (RFID) based plate recognition for registered vehicle in UMP. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nur Amirah , Azhar (2012) Sol-gel derived silver doped nanocrystalline titania catalysed photodegradation of methylene blue from aqueous solution. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nur Anis, Saarani (2012) Screening and optimising metal salt concentration for marine microalgae harvesting by flocculation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Anis Adlina, Mat Noor (2012) Settlement of an embankment treated with preloading and prefabricated vertical drain of east-coast highway phase 2 (a case study). Faculty of Civil and Environmental Engineering, Universiti Malaysia Pahang.

Nur Aqilah, Othman (2012) A study on the impact of processing parameters on low-voltage power MOSFET. Faculty of Engineering , Universiti Malaya.

Nur Aqlili Naqqiah, Mokhtar (2012) aintenance management consideration in highway operation case study : east coast expressway. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Aqma Nadira , Mazuki (2012) Evaluation of natural additives for modification concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Arifah , Jaafar (2012) Determination of total polycyclic aromatic hydrocarbon (PAHs) in road dust along Kuantan-Gambang road. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nur Atiqah, Abu Bakar (2012) Effect of population growth on demand and water crisis in Universiti Malaysia Pahang. Faculty of of Civil and Environmental Engineering, Universiti Malaysia Pahang.

Nur Atiqah , Zulkifli (2012) The effectiveness of cement-palm oil fiber (POF) as soil stabilizer. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Azhani, Abd Razak and Juliawati, Alias and L. H., Shah and M., Ishak (2012) Effect of Heat Treatment on Corrosion Behaviour of Welded AA6061 Aluminium Alloy in Seawater. In: 15th International Conference on Advances in Materials & Processing Technologies , 23-26 September 2012 , Wollongong, Australia. . (Published)

Nur Azzimah, Zamri (2012) Properties of concrete containing POFA with different fineness as partial sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Darwani, Abd Rahman (2012) Problems of building defects after handing over the key. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Diyana, Mohd Samsuddin (2012) Community water quality monitoring. Faculty of Industrial Sciences And Tecnology, Universiti Malaysia Pahang.

Nur Diyana Wahida, Adam (2012) A simplification of reading thermodynamic properties using microsoft excel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Fadhilah, Che Nordin (2012) Implementing Jakob Nielsen�s 10 Heuristics of usability in development of web based dental system (WEBDENT). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nur Faezah, Harith (2012) Study on water demand and capacity at UMP Gambang campus. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Farahain, Khusnun (2012) Mixed-mode interaction membrane chromatography for protein fractionation. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Nur Farahana , Mat Khairi (2012) Face detection of thermal images based on color image processing. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nur Farahin, Mohd Razlan (2012) Extraction of caffeine from PBC123. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Farzana, Omar (2012) Production of Biodiesel from Castor Oil Using Egg Shell Waste as Solid Catalysts. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Fatiha , Amat Sani (2012) Determination of heavy metals in Gambang Lake Water. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nur Fitriah, Mohd Jaafar (2012) Effects of carbon dioxide on flammability limits of acetylene. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Haezah, Mamat (2012) Design and develop current limiter for mosfet during overvoltage operation. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Hamidah , Abdul Jalal (2012) Assessing water yield by using remote sensing at Sungai Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nur Hidayah, Hashim (2012) Fabricating a simple fan system for small low speed wind tunnel and studying the parameter for frequency adjustment. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nur Idayu, Nirda Ismail (2012) Production of bio-oil from sawdust and oil palm fronds biomass uaing gas fired pyrolysis system. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Iffatul Hanisa, Mohamad Rozulan (2012) Knowledge management system for vegetables farmers in Pahang. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nur Isma Idayu, Ismail (2012) Production of Beta-Carotene by Dunaliella Salina : Effect of Nano3 Concentration and Light Intensity. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Izzati , Khairuddin (2012) Performance of diesel engine using hydrogen as a fuel. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nur Liyana, Yusoff (2012) Real - time temperature monitoring system using MATLAB. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nur Madieha, Md Yusof (2012) Thermal behaviour of polylactic acid (PLA) nanocomposite based on modified nanoclay. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Nabilah, Zulkifli (2012) Electrochemical study of polyaniline powder and its characterization. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nur Nadiah, Mohammad Alwudin (2012) The reduction of work in progress between process in strut production line of a manufacturing factory. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nur Nadiah, Mohd Nazim (2012) The compressibility behavior of natural clay soil with sodium chloride & distilled water. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Najiah, Mohd Nasir (2012) Design a smart insect repeller using ultrasonic sensor. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Sakinah, Abd Aziz (2012) Synthesis and swelling behaviour of bentonite based superabsorbent polymer composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Shahida, Nawi (2012) The detection and summation of squamous epithelial cells for sputum quality testing. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Shahidah, Ahmad Sobri (2012) A case study : flood mitigation project in Kelantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Shahira Diana , Salehuddin (2012) Compressive strength of concrete using glass powder as a filler replacement. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Nur Shazwani, Nadzri (2012) The optimization of red pigment by monascus purpureus FTC 5356 in solid state fermentation. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Nur Suhaida, Roslan (2012) Study on workability and strength of fresh and hardened concrete containing different percentage of chipboard waste. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Suraini, Hashim (2012) Design of mini CNC machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nur Syahidah, Yusoff and Maman Abdurachman, Djauhari (2012) The Influence Of Geothermal Environment To The Quality Of Porcelain Insulator: A Gap Analysis. In: International Conference on Statistics in Science, Business, and Engineering (ICSSBE 2012) , 10-12 September 2012 , Langkawi, Kedah. pp. 1-4.. (Published)

Nur Syahidah, Yusoff and Maman Abdurachman, Djauhari and Ebi Shahrin, Suleiman (2012) A social network analysis on organizational commitment in Malaysia. IEEE Xplore. pp. 1-4. (Published)

Nur Syahidah, Yusoff and Maman Abdurachman, Djauhari and Shamshuritawati, Sharif and Ebi Shahrin, Suleiman (2012) Organizational Commitment in Malaysian Public University: An Evidence via Social Network Analysis. International Journal of Basic & Applied Sciences IJBAS-IJENS, 12 (5). pp. 17-21. (Published)

Nur Syahirah Adiba , Jamsus (2012) Strength characteristic of bentonite and kaolin with and without thermal mixed with sand. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nur Syahkina, Sahabe Marubi (2012) Chili disease system (CDS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nur Syamiera Nabila , Masri (2012) The effect of drying temperature towards quantity and quality of palm oil extracted from dried decanter cake. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nur Syarmim , Mohamed Noor (2012) Heavy metals content in Pahang river stream sediment : upper and lower baseline studies. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nur Syazreen, Ardnan (2012) Foreground and background detection of thermal image for h1ni screening. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Syazwan , Omar (2012) The effectiveness of palm oil clinker (POC) as soil stabilizer. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Wahidah, Kamaruddin (2012) Site investigation on Sg. Belat bridge and road approaching KM1 federal road FR012 Jalan Gambang-Muadzam Shah, Pahang. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Yasmin, Amran (2012) Experimental study for PV grid connected. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur `Afifah, Mohd Mansor (2012) Solvent and temperature effect in the polymorphism study of 2,6-dihydroxybenzoic acid crystal. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Nur'ain , Abdullah (2012) Ultrafiltration of groundwater and rainwater as drinking water. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nuraini, Aziz (2012) Design and modal analysis of flat plate with eccentric hole. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nuraini, Mansor (2012) Optimization and chemical demulsification of crude oil emulsions. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdurahman, Hamid Nour).

Nurasyikin, Jusoh (2012) Synthesis of Polyester Nanofiltration Membrane for Removal of Natural Organic Matter. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurazma, Ariffin (2012) 3D bedroom decoration. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurbaitee, Mohamad Fauzi (2012) Case study : energy dissipater constructed in Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurfathin Izzati , Mohd Azhar (2012) The effect of sodium chloride on compressibility behaviour of pure kaolinite and natural soil. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurhafizah , Abdul Razak (2012) Formulation of lubricating grease from castor bean. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Nurhafizah , Nashruddin (2012) Strength analysis of cold-rolled steel roof truss members consist of hat channel and c-channel with different thickness. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nurhazwani , Musa (2012) Determination of vitamin C and minerals from spinach (Amaranthus viridis) chips for nutrients facts. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nurhidayah, Ramli (2012) Songket recognition using image processing (SRUIP). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Nuriasnizam , Mat Din (2012) The application of geographical information system (GIS) mapping the wind hazard in Perlis, Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Nurizzuddin , Ahmad Hussin (2012) The electrochemical study of graphene. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nurkhairunnisa, Zainudin (2012) Transport management system (TMS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurlaila, Ismail and Mohd Hezri Fazalul, Rahiman and Rozita, Jailani and Nor Azah, Mohd Ali and Mohd Nasir, Taib and Saiful Nizam, Tajuddin (2012) Investigation of Common Compounds in High Grade and Low Grade Aquilaria Malaccensis using Correlation Analysis. In: IEEE Control and System Graduate Research Colloquium (ICSGRC 2012) , 16-17 July 2012 , Shah Alam, Selangor. pp. 277-281.. ISBN 978-1-4673-2035-1 (Published)

Nurliana, Ramli (2012) Interactive learning using augmented reality. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurliany , Abd. Rahman (2012) A study of household solid waste composition and generation at Taman Tas Kuantan Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Nurlin, Abu Samah and A.D.A., Hisham and S.A., Rahim (2012) Determination of Stevioside and Rebaudioside A in Stevia Rebaudiana Leaves via preparative High Performance Liquid Chromatography (prep-HPLC). International Journal of Chemical and Environmental Engineering. pp. 7-10. ISSN 2078-0737. (Published)

Nurlina Auni , Mazelan (2012) A study on the characteristics of potential landfill site in Kuantan, Pahang, Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurmunira, Muhammad and Abdoullah, Namdar and Ideris, Zakaria (2012) Improving Peat Engineering Properties by Natural Mineral Mixture. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 23-27. ISSN 2180-2742. (Published)

Nurramlah, Abu Nasir (2012) Diagnosis of breast cancer using case-based reasoning. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nursyilla, Mohd Fauzi (2012) Effects of carbon dioxide gas on flammability limits of LPG. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul 'Izzati, Ab Rahim (2012) Study on Ageing Process of Polymer Modified Bitumen. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Adrina, Mohd Nasir (2012) Design and fabrication of silicon glue gun. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Afiqah, Abdul Rahim (2012) Synthesis of silver nanoparticle synthesis from tea leaf (Camellia Sinensis)extract and study on its antimicrobial. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Aida, Jamaluddin (2012) Computational fluid dynamics of flooding, loading and fully dispersed regime in gas-liquid stirred tank. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Ain, Ahmed (2012) Virtual room decorator in android. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurul Ain, Hamdan Abd. Khalek (2012) A study on ultrasonic assisted extraction and formulate natural hair shampoo from sapindus emarginatus. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Ain, Zainodin (2012) The effectiveness study of cockle shell in treating acidic surface water. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Ain, Zainodin (2012) The effectiveness study of cockle shell in treating acidic surface water. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Akma, Aliyah (2012) Adsorption of lead using rice husk. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Nurul Alia, Khalil (2012) Preparation of cation-exchange membrane chromatography by modification of polyamide membrane through grafting of methacrylic acid monomer. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Ariffah, Hamidi (2012) Design and fabrication of adjustable and portable 4- legs walker. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Asmaa , Ibrahim (2012) The effect of seawater and sodium chloride on the compressibility behavior of clay soil. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Asmida, Kamaruddin (2012) Investigation of corrosion effects on aluminum-stainless steel weld joint. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Asqi, Md Rashid (2012) Design and fabricate of cat feeder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Asyikin , Zulkepli (2012) Properties of concrete containing finely crushed oil palm shell as partial sand replacement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Atikah, Nasir (2012) Adjustable closed-loop DC motor speed controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurul Atikah , Abdul Halim (2012) Thin films hydroxyethyl cellulose/silver nanoparticles (HEC/AGNP) for antibacterial studies. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nurul Atiqah , Ajis (2012) Study on the improvement code of practices in structural design and material specifications. Faculty of Civil and Environmental Engineering, niversiti Malaysia Pahang.

Nurul Atiqah Syazwani, Kamarudin (2012) Landmark detection for vision based of autonomous guided vehicle. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurul Azimah, Othman (2012) A study on lean manufacturing implementation at metal products industry for small medium enterprises (SMEs). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurul Bazlinda, Bazalan (2012) Study the effect of pressure on flammability limits of acetylene. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Fadzlina, Jamin (2012) LED street lamp detection for automotive auto beam detection. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nurul Farah Ain, Abdul Hamid (2012) Warning system for ethic of visitor in hospital ICU using vision system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurul Farhana, Alias (2012) Novel method of preparation of blue crude copper phthalocyanine having the grennish shade. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Nurul Farhana, Mohamed Basri (2012) Cation exchanger mixed matrix membrane (MMM) for lead (II) removal from wastewater. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Fateha, Abd Aziz (2012) A case study on implementation of just-in-time (JIT) production system in Malaysia automotive industry. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurul Fatehah, Abdul Ghafar (2012) Pencirian pencilan bakteria anaerob selulolitik dan ligninolitik dalam biodegradasi sisa batang pisang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Fatin Shazwani, Suhaimi (2012) Bio-oil Production from Pyrolysis of Palm Oil Wastes. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Fazirah, Ghazali (2012) Implementation of real time lighting data for Pekan and validation data with lighting TNBR. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurul Hazlina, Noordin and Erdogan, Ahmet T. and Arslan, Tughrul and Flynn, Brian (2012) Compact Directional Patch Antenna with Slotted Ring for LTE Frequency Band. In: Loughborough Antennas & Propagation Conference (LAPC 2012) , 12-13 November 2012 , Loughborough, UK. pp. 1-4.. (Published)

Nurul Hazlina, Noordin and Erdogan, Ahmet T. and Arslan, Tughrul and Haridas, Nakul and El-Rayis, Ahmed O. (2012) Antenna Array with Wide Angle Scanning Properties. In: 6th European Conference on Antennas and Propagation (EUCAP 2012) , 26-30 March 2012 , Prague, Czech Republic. pp. 1636-1640.. (Published)

Nurul Hazlina, Noordin and Erdogan, Ahmet T. and Arslan, Tughrul and Zhou, Wei (2012) Single-Feed Polarization Reconfigurable Patch Antenna. In: IEEE Antennas and Propagation Society International Symposium (APSURSI 2012) , 8-14 July 2012 , Chicago, Illanois. pp. 1-2.. (Published)

Nurul Hidayah, Kadzim (2012) A study on effectiveness of pedestrian bridge utilization. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Hidayah, Razak (2012) Machining characteristics of hastelloy c-2000 in end milling using artificial intelligence approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Mustafizur, Rahman).

Nurul Hidayah, Razak and M. M., Rahman and K., Kadirgama (2012) Response surface design model to predict surface roughness when machining hastelloy C-2000 using uncoated carbide insert. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012022). ISSN 1757-899X (Published)

Nurul Hidayati, Salleh (2012) Semi solid metal pouring temperature effects on mechanical properties of Al-Si alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Huda, Baso (2012) Design and development a small stirling engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Husna, Hashim (2012) Study on the Effect of Processing Parameters on the Extraction of Stevioside Using Ultrasonic Extractor. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Idayu, Mohamad (2012) Simulation of fuzzy logic for watering plant using sprinkler. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurul Izyani, Abdul Manan (2012) Production of arachidonic acid from candida krusei. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Izyatulikma, Yusoff (2012) A pre-study on the potential plants to treat heavy metals in contaminated soil. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Izzah, Ishak (2012) Children monitoring system using radio frequency (RF) technology. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurul Izzati, Yusop (2012) Experimental and simulation study of wind turbine grid connected. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurul Jannah , Aziz (2012) Analysis of risk on construction site. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nurul Kalyisah, Abd Khar (2012) The molecular dynamics simulation of 2,6-dihydroxybenzoic acid crytal in ethanol, methanol and p-xylene at 20°c using compass force field. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Mahaya, Abdul Razak (2012) English courseware for preschool student. Faculty of Computer System & Sofware Engineering, Universiti Malaysia Pahang.

Nurul Muhammad, Ahmad (2012) Alternative leachate treatment using cement kiln dust. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Nadia, Samin (2012) Reduction of Fe(II), Zn(II) and Cd(II) using rice husk. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Nadiah , Zulkefle (2012) Investigative study on common curing methods in reducing plastic shrinkage in concrete slabs. Bachelor of Civil Engineering, Universiti Malaysia Pahang .

Nurul Syamila, Mohd Rosli (2012) Stator resistance estimation of induction motor using genetic algorithm. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Syazwani, Rohaimi (2012) CFD study on the effect of velocity and temperature toward the performance on partial combustion unit. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Zawarni , Zaim (2012) Improvement on engineering properties of Pekan soft clay treated with hydrated lime as a method of soil stabilizer. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nurulain , Mohamed Hatta (2012) Measuring and modeling the shrinkage characteristics of plastic clays. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nurulain , Zaini (2012) Bus rail transit as an optimum solution for Majlis Bandaraya Melaka Bersejarah future public transportation demand. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurulfaizah , Mohd Ismail (2012) The effect of waste foundry sand as partial sand replacement towards porosity and chloride resistance in mortar. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nurulfarhana, Mohd Azhar (2012) Auto generate men cloth template. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nuruliana, Ismail (2012) Enhancement production biogas from palm oil mill effluent (POME). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nuruljannah, Samidi (2012) Development of cement kiln dust (CKD) based catalyst for biodiesel production from waste cooking oil. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nuruzzaman, D. M. and Chowdhury, M. A. (2012) Friction Coefficient and Wear Rate of Copper and Aluminum Sliding against Mild Steel. International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies , 4 (1). pp. 29-40. ISSN 2228-9860(print); 1906-9642(online). (Published)

Nuur Husna, Hasnin (2012) A Preliminary Development of Baseline For Normal Condition of Local Exhaust Ventilaton System (Lev)By Using Mahalanobis Distance (Md) Method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

O

Omar, Arshad (2012) Effect of constant and varying mixture properties in spark ignition engine combustion process using computational fluid dynamics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Omer, Abdeen Mustafa (2012) Built Environment: Relating The Benefits of Renewable Energy Technologies. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 561-575. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

Ong, Foo Kheng (2012) Identification of chemical compounds in liquid aroma for swiftlet ranching. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Ong, Hui Fong (2012) Extraction of essential oil from orange peels. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ong, Chien Young (2012) Order and supporting system for Lido Enterprise. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ong, Huei Ruey and Reddy Prasad, D. M. and Khan, Maksudur R. and Rao, D. Subba and Jeyaratnam, N. and Raman, Dinesh Kumar (2012) Effect of jatropha seed oil meal and rubber seed oil meal as melamine urea formaldehyde adhesive extender on the bonding strength of plywood. Journal of Applied Sciences, 12 (11). pp. 1148-1153. ISSN 1812-5654. (Published)

P

P. Jonga, Rudiyanto and Kahar, Osman and Mohd Azrul Hisham, Mohd Adib (2012) Determination of correlation between backflow volume and mitral valve leaflet young modulus from two dimensional echocardiogram images. In: AIP Conference Proceedings: The 4th International Meeting Of Advances In Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 604-611., 1440. ISSN 0094-243X (Published)

Pei Chyi, Tan (2012) Sport facility booking system (SFBS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Pejabat, Naib Canselor UMP (2012) Teks Ucapan Yang Hormat Profesor Dato' Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang Sempena Majlis Amanat Tahunan Naib Canselor 2012 dan Majlis Pelancaran Sambutan 10 Tahun UMP. In: Inovasi Berdisiplin Sepanjang Migrasi, 16 Februari 2012, Dewan Kompleks Sukan Universiti, UMP Kampus Gambang. (Unpublished)

Pejabat, Naib Canselor UMP (2012) Laporan Tahunan 2012 : Universiti Malaysia Pahang. Universiti Malaysia Pahang.

Pek Ling, Wee (2012) Integrated staff attendance system (ISAS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Perwira Putra, Iskandar (2012) Design and develop new glass bottle recycling system in Kuantan community. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Peter , Meredan (2012) Kuantan clay subgrade stabilization by using oil palm empty fruit brunches (OPEFB) ash mixed with Portland cement as stabilizer. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Pillai Ganasekaram, Regupathi Raja (2012) Biopetrol synthesized from rubber seed oil by zeolite catalyst :effect of ethanol in solvent extraction of rubber seeds. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Pin, Banchaa Inthaknu (2012) Development of an energy management system for an inhouse parallel hybrid electric vehicle. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Prabagar, Murukesavan (2012) Computational fluid flow analysis of a side mirror for a passenger car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Pramnath, Ravi (2012) Analysis of reduction of particulate matter concentration and size distribution of di diesel engine by seawater spray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Prima, Vitasari and Muhammad Nubli, Abdul Wahab and Ahmad, Othman and Mohd Ghani, Awang (2012) Psyshophysiological Treatment in Reduced Anxiety With Biofeedback Training for University Students. International Journal of Technology Management, 1. pp. 71-76. ISSN 2289-2753. (Published)

Puteri Norfazreen, Razali (2012) Development of high efficiency combustor system for industrial furnace. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Q

Qamaruddin, Mohd Fauzi (2012) Design and fabrication of environmental noise reduction device. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Qin, Hongwu and Ma, Xiuqin and Jasni, Mohamad Zain and Herawan, Tutut (2012) A Novel Soft Set Approach in Selecting Clustering Attribute. Knowledge-Based Systems, 36. pp. 139-145. ISSN 0950-7051. (Published)

Qin, Hongwu (2012) The new efficient and accurate attribute-oriented clustering algorithms for categorical data. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jazni, Mohamad Zain).

R

R. S., Hadi and Z., Khalidin and Kamarul Hawari, Ghazali and M., Zeehaida (2012) Human parasitic worm detection using image processing technique. In: IEEE Symposium on Computer Applications and Industrial Electronics (ISCAIE 2012) , 3-4 December 2012 , Kota Kinabalu, Sabah. pp. 196-201.. ISBN 978-1-4673-3033-6 (Published)

Rabbi, Khandakar Fazley and Beg, Abul Hashem and Herawan, Tutut (2012) MT2Way: A novel strategy for pair-wise test data generation. In: 6th International Symposium on Intelligence Computation and Applications (ISICA 2012) , 27-28 October 2012 , Wuhan, China. pp. 180-191., 316. ISBN Online ISBN 978-3-642-34289-9 (Published)

Rabiatul Adawiyah, Zaukifli (2012) Formulation of Wound Healing Hydrogel from Keratin Protein. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Rabiei, Mamat and Herawan, Tutut and Noraziah, Ahmad and Mustafa, Mat Deris (2012) On soft partition attribute selection. In: 3rd International Conference on Information Computing and Applications (ICICA 2012) , 14-16 September 2012 , Chengde, China. pp. 508-515.. ISBN 978-3-642-34062-8 (Published)

Radhiah, Zainon (2012) Paddy disease detection system using image processing. Faculty of Computer Systema and Software Engineering, Universiti Malaysia Pahang.

Rafidah, Rahim (2012) Performance of biodiesel blends on compression ignition engine. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rafidah, Rahim and R., Mamat and Mohd Yusof, Taib (2012) Comparative study of biofuel and biodiesel blend with mineral diesel using one-dimensional simulation. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (012009). ISSN 1757-899X (Published)

Rafidah, Rahim and R., Mamat and Mohd Yusof, Taib and Abdul Adam, Abdullah (2012) Influence of Fuel Temperature on Diesel Engine Performance Operating With Biodiesel Blend. Journal of Mechanical Engineering and Sciences (JMES) , 2. pp. 226-236. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Rafidah, Rahim and R., Mamat and Mohd Yusof, Taib and Abdul Adam, Abdullah (2012) Influence of Fuel Temperature on a Diesel Engine Performance Operating with Biodiesel Blended. International Journal of Advanced Science and Technology, 43. pp. 115-126. ISSN 2005-4238 . (Published)

Rahimah, Abd Rahim (2012) Optimization Of Phenolic Content From Tulsi Plant (Ocimum Sanctum) By Ultrasonic-Assisted Extraction: Comparison With Conventional Soxhlet Extraction Method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rahimah, Yusoff (2012) Effect of palm oil fuel ash (POFA) as cement replacement material toward concrete microstructure. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Rahmah, Mokhtar (2012) Model pengguna aplikasi tutoran web adaptif pintar. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, Thesis advisor: Nor Azan, Mat Zin).

Rahman, Md. Arafatur and Caleffi, Marcello and Paura, Luigi (2012) Joint Path and Spectrum Diversity in Cognitive Radio Ad-hoc Networks. EURASIP Journal on Wireless Communications and Networking, 235. pp. 1-9. ISSN 1687-1499. (Published)

Raihan, Abdul Rashid (2012) Study of polypropylene (PP) cartridge filter characteristics and development of liquid filtration system test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Raja Ariffin, Raja Ghazilla and Zahari, Taha and Salwa Hanim, Abdul-Rashid and Sakundarini, Novita and Gonzales, Julirose (2012) Product Recovery Oriented Approach For Fastener Selection During Conceptual Design. International Journal of Sustainable Design, 2 (1). pp. 64-82. ISSN 1743-8284 (Print); 1743-8292 (Online). (Published)

Raja Nur Nadhirah, Raja Othman (2012) Solubility study of 2,6- dihydroxybenzoic acid in o-xylene, methanol and acetonitrile using HPLC method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Rajan, Jose and Kumar, V. Ratheesh and Wariar, P. R. S. and Pazhani, R. and Thomas, J. K. and Koshy, J. (2012) Development, Characterization, Sintering, Dielectric and Optical Properties of NdBa2ZrO5·5 Nanocrystals. Bulletin of Materials Science, 35 (7). pp. 1039-1045. ISSN 0250-4707 (print); 0973-7669 (online). (Published)

Rajan, Jose and M. M., Yusoff (2012) Tailoring of electron diffusion through TiO2 nanowires. In: International Conference on Nanotechnology - Research and Commercialization (ICONT 2011) , 6-9 June 2011 , Sabah. pp. 5-25., 1502 (1). ISSN 0094243X ISBN 978-073541119-7 (Published)

Rajinder Singh, Harvinder Kaur (2012) English learning system using speech recognition for visual impaired user (ELSRVI). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ramanathan, Geetha (2012) Investigating the effect of magnetic force on the flow behavior of pipeline. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ramani, Deepa (2012) Pre-schooler learning system using mobile application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ramdan, Razali (2012) V/I control method and its an implementation for maximizing attainable efficiency of induction motor. PhD thesis, Multimedia University Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Ramdan, Razali and Abdalla, Ahmed N. and Ruzlaini, Ghoni and Venkataseshaiah, C. (2012) Improving Squirrel Cage Induction Motor Efficiency: Technical Review. International Journal of Physical Sciences , 7 (8). pp. 1129-1140. ISSN 1992-1950. (Published)

Ranitha, Mathialagan (2012) Extraction and characterization of essential oil from ginger (Zingiber Officinale Roscoe) and lemongrass (Cymbopogon Citratus) by microwave-assisted hydrodistillation (MAHD). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ranj, Sirwan and Alghoul, M.A. and K., Sopian and Yusoff, Ali (2012) Thermodynamic Analysis of an Ejector-Flash Tank-Absorption Cooling System. Applied Thermal Engineering, 58 (1-2). pp. 85-97. ISSN 1359-4311. (Published)

Rasha, Mohammed Abd and Nour, A. H. (2012) Optimisation of immobilised cellulase onto carbon nanotubes using response surface methodology. International Journal of the Physical Sciences, 7 (5). pp. 841-849. ISSN 1992-1950. (Published)

Rashag, Hassan Farhan and S. P., Koh and Abdalla, Ahmed N. and Nadia M. L., Tan and K. H., Chong and S. K., Tiong (2012) DTC Torque Ripple Minimization Based on PSO-PID Controller. Scientific Research and Essays, 7 (15). pp. 1564-1572. ISSN 1992-2248. (Published)

Rawaida , Jaafar (2012) Unclean hand detection machine using vision sensor. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Reddy Prasad, D. M. and Amirah, Izam and Khan, Maksudur R. (2012) Jatropha curcas: Plant of Medical Benefits. Journal of Medicinal Plants Research, 6 (4). pp. 2691-2699. ISSN 1996-0875. (Published)

Riduan, Abdul Rahman (2012) Noise extraction using frequency domain analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rohaizamri, Shuhaimin (2012) Study on workability and strength properties of concrete containing 0%, 5%, 15% and 25% quarry dust as fine aggregate replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Roshaiza, Muhamad (2012) Improvement of the Cold Flow Property of Biodiesel from Palm Oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Rosliana, Abdul Jalil (2012) Design and fabricate knee walker for malaysian elderly and disable people. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Roslinazairimah, Zakaria and Howlett, P. G. and Piantadosi, J. and Boland, J. W. (2012) Rainfall modelling using the sum of independent gamma variables. In: AIP Conference Proceedings: International Conference on Fundamental and Applied Sciences (ICFAS2012) , 12-14 June 2012 , Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia. pp. 369-372., 1482. ISBN 978-0-7354-1094-7 (Published)

Rosmanira, Mohd Ab Ghani (2012) Continuous hydrogen production with anaerobic palm oil mill effluent (POME) sludge immobilized by synthetic polymer. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Rosmawati, Naim and A. F., Ismail and Mansourizadeh, A. (2012) Effect of non-solvent additives on the structure and performance of PVDF hollow fiber membrane contactor for CO 2 stripping. Journal of Membrane Science, 423-424. pp. 503-513. ISSN 0376-7388. (Published)

Rosmawati, Naim and Ahmad Fauzi, Ismail and Mansourizadeh, A. (2012) Effect of Non-Solvent Additives on the Structure and Performance of PVDF Hollow Fiber Membrane Contactor for CO2 Stripping. Journal of Membrane Science, 423-42. pp. 503-513. ISSN 0376-7388. (Published)

Rosmawati, Naim and Ahmad Fauzi, Ismail and Mansourizadeh, A. (2012) Preparation of Microporous PVDF Hollow Fiber Membrane Contactors for CO2 Stripping from Diethanolamine Solution. Journal of Membrane Science, 392-393. pp. 29-37. ISSN 0376-7388. (Published)

Rosnadia, Rosli (2012) A case study on floods at Rantau Panjang, Kelantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Rosnia, Masruki and Noor Azlinna, Azizan (2012) The Impact of Asian Financial Crisis to Earnings Management and Operating Performance in Malaysia. The Social Sciences, 7 (4). pp. 510-516. ISSN 1818-5800. (Published)

Rossi, Passarella and Zahari, Taha (2012) Lightweight Solar Vehicle Impact Analysis Using ABAQUS/EXPLICIT. Computer Engineering and Applications, 1 (2). pp. 85-96. ISSN 2252-4274 (Print); 2252-5459 (Online). (Published)

Rosyati, Hamid and Norazura, Abd. Halim and Faradila, Naim and Kamarul Hawari, Ghazali and Zeehaida, Mohamed and Nurul Wahidah, Arshad (2012) Detection And Summation Of Pus Cells And Epithelial Cells For Sputum Quality Grading Using K-Means Clustering And Color Thresholding. In: 7th International Conference on Computing and Convergence Technology (ICCCT 2012) , 3-5 December 2012 , Seoul, Korea. pp. 1378-1383.. (Published)

Rozita, Mohd Yusof and Norrozila, Sulaiman (2012) Postprocessing algorithm for security features extraction. In: IEEE International Conference on E-Learning and E-Technologies in Education (ICEEE 2012) , 24-26 September 2012 , Lodz, Poland. pp. 219-222.. ISBN 978-1-4673-1678-1 (Published)

Rozita, Mokhtar and Yuserrie, Zainuddin (2012) Entrepreneurial Intention of Engineering Students in Malaysian Polytechnics Institutions: A Theory of Planned Behavior Approached. International Journal of Technology Management, 1. pp. 103-110. ISSN 2289-2753. (Published)

Rubyatul Jannah, Ismail (2012) Cation exchanger mixed matrix membrane for copper removal. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Rumana, Ghufran (2012) Enhanced Anaerobic Degradation Of Palm Oil Mill Effluent Using Butyrate, Cao-Ckd And Denitrifying Sulfide Removal. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rushdina, Roslan (2012) Automatic detection of human parasite worm using microscopic image. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Rusmawarni, Ramli (2012) Removal of lignin from meranti wood sawdust for enhances enzymatic hydrolysis and production of sugar alcohol. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Ruzaini, Abdullah Arshah (2012) Assessment instrument for integrated information system success in institution of higher learning. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Ruzaini, Abdullah Arshah and Mohammad Ishak, Desa and Ab. Razak, Che Hussin (2012) Classifying Domains for Criteria and Factors of Successful Integrated Information System. In: AWERProcedia Information Technology & Computer Science 2nd World Conference on Innovation and Computer Sciences - 2012 , 2012 . . (Published)

Ruzaini, Abdullah Arshah and Mohammad Ishak, Desa and Ab. Razak, Che Hussin (2012) Establishing Important Criteria and Factors for Successful Integrated Information System. In: AWERProcedia Information Technology & Computer Science, 2nd World Conference on Innovation and Computer Sciences - 2012 , 2nd World Conference on Innovation and Computer Sciences - 2012. . (Published)

Ruzinah, Isha and Williams, Paul. T (2012) Experimental design methodology for optimising catalytic performance of Ni/Ce/α-Al 2O 3 catalyst for methane steam reforming. Journal of the Energy Institute, 85 (1). pp. 22-28. ISSN 01442600. (Published)

S

S., Izman and M. A., Hassan and Mas Ayu, Hassan and Mohammed Rafiq, Abdul Kadir and Mohammed Ruslan, Abdullah and Mahmood, Anwar and A., Shah and R., Daud (2012) Effect of pretreatment process on thermal oxidation of biomedical grade cobalt based alloy. Advanced Materials Research, 399-401. pp. 1564-1567. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

S.M., Sulong and Kamarul Hawari, Ghazali and Jasni, Mohamad Zain and Z., Mohamed (2012) Ascaris Lumbricoides Egg Detection from Digital Microscopic Fecal Sample Images. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 59-62.. (Published)

S.Y., Lam and N. H., Shuaib and H., Hasini and N. A., Shuaib (2012) Computational Fluid Dynamics Investigation on the use of Heat Shields for Thermal Management in a Car Underhood. International Journal of Automotive and Mechanical Engineering (IJAME), 6. pp. 785-796. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sabira, Khatun and Ali K., Marzook and Alyani, Ismail and Aduwati, Sali and Mohannad Hamed, Khalaf and Borhan, M. Ali (2012) Reduced Rank Technique for Joint Channel Estimation and Joint Data Detection in TD-SCDMA Systems. Wireless Personal Communications, 69 (4). pp. 1629-1646. ISSN 0929-6212 (print); 1572-834X (online). (Published)

Sabtu, Rahimah (2012) Removal of acrylic acid (AA) from process water by using alumina. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Saha, Pradip and Khan, Maksudur R. and Deb, T. K. and Majumdar, S. and Alam, F. and Sarker, N. C. (2012) Enzymatic Hydrolysis of Rice Straw to Fermentable Sugar: Kinetic Study. Journal of Chemical Engineering, 27 (2). pp. 20-24. ISSN 2221-7436. (Published)

Saharudin, Ramli and Hafizoah, Kassim (2012) The Deputy Vice Chancellor (A&A) Roadshow. Ilham, 9 . p. 8. ISSN 1985-157X

Saharudin, Ramli and Zuraina, Ali (2012) The National Jawi Script and Technology Seminar 2012. Ilham, 9 . p. 6. ISSN 1985-157X

Saher, Faisal Nadeem and Nasly, Mohamed Ali and Tuty Asmawaty, Abdul Kadir and Teruggi, Giacomo (2012) Environmental Degradation in Malaysia's Pahang River Basin and its Relation with River Pollution: Strategic Plan from Assessment to Mitigation using Geo-Informatics. In: International Conference on Energy, Environment and Sustainable Development, Jamshoro, Pakistan, 2012 , 27-29 February 2012 , Jamshoro, Sindh, Pakistan. pp. 1-8.. (Published)

Saidatul Shima, Jamari and Jonathan R., Howse (2012) The Effect of the Hydrothermal Carbonization Process on Palm Oil Empty Fruit Bunch. Biomass and Bioenergy, 47. pp. 82-90. ISSN 0961-9534. (Published)

Saifful Kamaluddin, Muzakir and Izan Izwan, Misnon and Rajan, Jose and M. M., Yusoff (2012) International Conference on Nanotechnology 2012 (ICONT 2012) : Program Book & Compilation of Abstracts. Universiti Malaysia Pahang, Kuantan.

Saifudin, Razali (2012) Smoothing techniques and a spherical simplex unscented transformation in solving a SLAM problem. PhD thesis, Okayama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Saiful Amin, Kamaruddin (2012) Modelling and simulation of skyhook controllersemi-active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sajadin, Sembiring (2012) An application of predicting student performance using kernel k-means and smooth support vector machine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad@ Hamza, Mohd. Azwan).

Sakundarini, Novita and Zahari, Taha and Raja Ariffin, Raja Ghazillaa and Salwa Hanim, Abdul Rashid and Gonzales, Julirose (2012) A framework of integrated recyclability tools for automobile design. International Journal of Industrial Engineering, 19 (10). pp. 401-411. ISSN 1943-670X. (Published)

Salam, Urme and Muhammad Nubli, Abdul Wahab and Ahmad, Ibrahim (2012) The Effect of Zikir on the Performance Psychology of Diploma Student through Heart Rate Variability Biofeedback. International Proceedings of Economics Development & Research, 53 (5). pp. 20-24. ISSN 2010-4626. (Published)

Salimah, Shafii (2012) The effect of preparation methods condition on the activity of palladium and platinum catalysts towards hydrogenation of palm olein. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Salman Ahmad, Akhwanzada and Razman, Mat Tahar (2012) Strategic Forecasting of Electricity Demand Using System Dynamics Approach. International Journal of Environmental Science and Development, 3 (4). pp. 328-333. ISSN 2010-0264. (Published)

Samylingam, Lingenthiran (2012) Improve material handling system in Hirotako Acoustic Sdn.Bhd'��s : logistic department area. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Sangeetha, Govindasamy (2012) Optimization of grinding parameter when grind haynes 242 using water based titanium oxide (TiO2) nanocoolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Santi Puteri Rahayu, - (2012) Logistic regression methods for classification of imbalanced data sets. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: R.J Asnim, Ohamadz Zain).

Sarad, S. Naga and Raju, A.V. Sita Rama and Radha, K. Kalyani and Sunder, L. Syam (2012) Augmentation of Turbulent Flow Heat Transfer in A Horizontal Tube with Varying Width Twisted Tape Inserts. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 797-810. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sarah, Zulkiple (2012) Share Your Knowledge (S.Y.O.K). Ilham, 9 . p. 21. ISSN 1985-157X

Sarah, Zulkiple (2012) Workshop for Kolej Komuniti Rompin. Ilham, 9 . p. 22. ISSN 1985-157X

Sarawanakumar, Segar (2012) Bulan Restu bus ticketing system (online). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Sasikala, Mahalingam (2012) Cytotoxic activity of different fractions of Tinospora Crispa stems extracts. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Sasikala, Appalasuwami (2012) Biotransformation of eugenol and isoeugenol to vanillin by Aspergillus Niger. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Sellamuthu, Santhana Kumari (2012) Nucleate boiling on prepared surface. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Selvakumar, Raja Saravana Kumar and Kamarul Hawari, Ghazali and Nik Mohd Kamil, Nik Yusof (2012) Framework of Multi-Microcontroller Evaluation Tool for a use of Academic Environment. International Journal of Advanced Computer Science, 2 (7). pp. 263-268. ISSN 2251-6379. (Published)

Selvakumar, Raja Saravana Kumar (2012) Design of multiple microcontrollers platform for use in academic environment. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ghazali, Kamarul Hawari).

Ser Er, Chang (2012) Separation of crude oil emulsions via microwave heating technology. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Seydametova, Emine and Jailani, Salihon and N., Zainol and Convey, Peter (2012) Production of Lovastatin by Penicillium spp. Soil Microfungi. International Journal of Chemical Engineering and Applications (IJCEA), 3 (5). pp. 337-339. ISSN 2010-0221. (Published)

Shafizah , Sa'adon (2012) Synthesis of niobium-doped mcm-48 molecular sieves and its catalytic performance for production of chalcone. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Shaharuddin , Kormin (2012) Development and characterization of biodegradable blends of low density polyethylene (LDPE) incorperated with thermoplastic sago starch. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Shahrizal, Ibrahim (2012) Experimental evaluation of heat flow from rectangular fins array under forced convection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shakaib, M. and S. M. F., Hasani and Iqbal, Ahmed and R. M., Yunus (2012) A CFD study on the Effect of Spacer Orientation on Temperature Polarization in Membrane Distillation Modules. Desalination, 284. pp. 332-340. ISSN 0011-9164. (Published)

Shalini, Mariyappan (2012) Pediatric Vaccination System (I-Vacci). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Shamshuritawati, Sharif and Nur Syahidah, Yusoff and Maman Abdurachman, Djauhari (2012) Network Topology of Foreign Exchange Rate. Modern Applied Science, 6 (11). pp. 36-43. ISSN 1913-1852 . (Published)

Shamugam, Shanker (2012) Biopetrol synthesized from rubber seed oil using zeolite as catalyst:effect of hexane in solvent extraction of rubber seed. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Sharifah Hanis, Syed Ahmad (2012) An expert system to track dengue fever. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Sharifah Maszura, Syed Mohsin (2012) Behaviour of fibre-reinforced concrete structures under seismic loading. PhD thesis, Imperial College London (Contributors, UNSPECIFIED: UNSPECIFIED).

Sharifah Nadia, Syed Ahmad (2012) Coastal defence : a study on the performance of Labuan block. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Sharifah Rahimah, Wan Mahdi (2012) Gas flow network analysis in putrajaya residential area using cox method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Sharizan , Ramli (2012) Evaluation of roof truss system under wind load using SAP 2000. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Shun Yung, Lee (2012) E-society. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Sia, Florence and Alfred, Rayner (2012) Evolutionary-based feature construction with substitution for data summarization using DARA. In: IEEE 4th Conference on Data Mining and Optimization (DMO 2012) , 2-4 September 2012 , Langkawi, Kedah. pp. 53-58.. ISBN 978-1-4673-2718-3 (Published)

Siddique, Md. Nurul Islam (2012) Treatment and enhanced degradation of petrochemical wastewater by continuous stirred tank reactor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siddique, Md. Nurul Islam and Zularisam, A. W. (2012) Continuous Stirred Tank Reactor Application for Renewable Methane from Anaerobic Biodegradation of Petrochemical Wastewater. Engineering e-Transaction, 7 (1). pp. 23-27. ISSN 1823-6379. (Published)

Siddique, Md. Nurul Islam and Zularisam, A. W. (2012) Renewable Methane from Ammonium Bicarbonate Supplemented Petrochemical Wastewater Treatment During Anaerobic Co-Digestion in CSTR. In: International Conference on Advances Science and Contemporary Engineering (ICASCE 2012) , 24 - 25 October 2012 , Bina Nusantara University, Jakarta, Indonesia. . ISSN 1877-7058 (Unpublished) (Unpublished)

Siew Ann, Lilian Tong (2012) Window based personalized time management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Siew Ching, Saw (2012) Heart disease dianosis system by applying case-based reasoning (CBR). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Siew Tien, Lau (2012) Improvement of quality performance in SME's manufacturing industries using statistical process control (SPC). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Singh, Rupinder (2012) Comparison of Polyjet Printing and Silicon Moulding as Rapid Plastic Moulding Solution. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 777-784. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Singh, Rupinder and Singh, Rajinder (2012) Effect of Workpiece Volume on Shell Wall Thickness Reduction in Rapid Casting of Aluminum using Three-Dimensional Printing. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 680-691. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sinnasamy, Thilageswari (2012) Clarification of musk lime base on color. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Siow Yi, Sam (2012) Polymer nanocomposites based on functionalized carbon nanotubes. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Siti Aishah, Mat Ali (2012) Cost comparison for construction of house using conventional and interlocking block method. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Siti Aisyah, Zakaria (2012) Evaluation on the operational effects of U-turn movement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Siti Aisyah , Jamil (2012) Application of natural fiber in ground improvement. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Siti Aisyah Radhiah, Mohamed (2012) Adsorption of methylene blue by using activated carbon from empty fruit bunch and palm press fiber. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Siti Balqis, Idris (2012) iBook by using Apple's bonjour protocol in a wireless classroom. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Siti Fairuszila, Izhar (2012) Compressive and flexural strengths of concrete with iron ore as sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Siti Farhana, Haron (2012) To study the production viability of bio-briquette from oil palm decanter cake. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Siti Hajar, Mustafar (2012) Study on the effect of different preparation methods of dope solution on development of polyethersulfone MMMs for O2/N2 separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Siti Hajar Fattyne , Zulkfli (2012) The comparison of soil contaminated by landfill leachate & industrial wastewater. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Siti Hazlina, Mokhtar (2012) Development of statistical process control (SPC) matlab-based software for automotive industries application. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Intansyafinaz, Abdul Kadir (2012) Moving average filter for ripple current elmination. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Siti Khadijah, Md Esa (2012) Production of PDMS/PEG-PVDF thin film composite membrane for CO2/N2 separation. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Siti Khadijah, Mohamad (2012) Car driver asissted for blind spot detection system. Universiti Malaysia Pahang, Universiti Malaysia Pahang.

Siti Khairunnisa, Daud (2012) Production of extracellular protease enzyme by aspergillus niger. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Siti Mahfuzah, Mohamad (2012) Improvement of take-away water cup design by using concurrent engineering approach. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Mariam , Ramli (2012) Effect of soil types on erosion. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Siti Masarah , Mohd Said (2012) Effects of palm oil fuel ash (POFA) on concrete towards chloride resistance. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Siti Muslihah, Isnain and Ahmad, Ibrahim (2012) SK Sri Iman educational visit. Ilham, 9 . p. 19. ISSN 1985-157X

Siti Muslihah, Isnain and Ezihaslinda, Ngah (2012) Bahasa Melayu for International Students (BMfIS) 2012. Ilham, 9 . p. 5. ISSN 1985-157X

Siti Natrah, Ismail (2012) Fabrication of bio composite from bacterial cellulose/starch. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Siti Natrah , Musa (2012) ffect of wind induced to road accident at north-south expressway (Kuala Lumpur to Tangkak). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Siti Noor Ain, Muhamad Husain (2012) Study on groundwater quality at Kampung Jaya Gading, Kuantan, Pahang. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Siti Nor Asikin, Kamalzaman and Sharifah Mashita, Syed Mohamad and Shahida, Sulaiman and Kamal Z., Zamli (2012) Supporting Maintenance of Web Applications Using User-Centered Technique. 2012 19th Asia-Pacific Software Engineering Conference. pp. 43-49. ISSN 1530-1362. (Published)

Siti Nor Hafizah , Mohd Sapawi (2012) Effect of erosion corrosion with different fluids mechanism. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Norazarina, Razali (2012) A study of establishing WBV's profile for bus drivers along Road from East to West Coast of Malaysia. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Norfarha, Jumaat (2012) Implement solar powered notenook. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Siti Norhafiza, Othman (2012) New fire alarm and smoke detector sensor using CCTV. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Norhafizah, Japri (2012) Measuring and modeling of shrinkage characteristic naturalsoil in Kuantan Pahang. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Siti Nur Ain, Abdul Kadir (2012) Blackouts mitigation of power system using fuzzy technique. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Siti Nur Aishah, Ahmad Shah (2012) Chemical concentration calculation based on spectrogram. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Siti Nur Aishah Rodziah, Alkhushairi (2012) Car plate detection system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Siti Nur Atikah, Abdullah (2012) A study of whole body vibration exposure for a bus driver along Kuantan to Johor Bharu. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Nur Khairunisa, Mohd Amir (2012) Development of bio-medical & cosmetic products from keratin protein:the production of anti aging cream with UV protection from chicken feathers. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Siti Nur Saadah, Mohd Jali (2012) Banana grading system using color histogram (BGS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Siti Nuraffini , Kamarulizam (2012) Formulation a dual effect natural drag reduction agent. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Nurul Aishah, Ahmad Nordin (2012) Effect of sulphuric acid concentration on oil palm empty fruit bunch (EFB) to produce advanced carbon product. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nurzalikha Zaini , Husni Zaini (2012) Sound characteristics for swiftlets attraction. Faculty of Electrical & Electronics Engineering , Universiti Malaysia Pahang.

Siti Rabiatull Aisha, Idris and Hardinnawirda, Kahar (2012) Effect of Rice Husks as Filler in Polymer Matrix Composites. Journal of Mechanical Engineering and Sciences (JMES) , 2. pp. 181-186. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman and Ali, Ourdjini (2012) Effect of Nickel Doping on Interfacial Reaction between Lead-free Solder and Ni-P Substrate. Advanced Materials Research, 488-48. pp. 1375-1379. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman and Ali, Ourdjini and Azmah Hanim, Mohamad Ariff (2012) Effect of Different Aging Temperatures on Interfacial Reaction between SAC305 and ENEPIG Surface Finish. Advanced Materials Research, 415-417. pp. 1181-1185. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Siti Rabiatull Aisha, Idris and Ali, Ourdjini and Y. T., Chin (2012) Effect of Nickel Addition into Sn-3Ag-0.5Cu on Intermetallic Compound Formation during Soldering on Copper. In: Proceedings of the 35th IEEE/CPMT International Electronics Manufacturing Technology Symposium (IEMT 2012) , 6-8 November 2012 , Kinta Riverfront Hotel, Ipoh, Perak. pp. 1-3.. (Published)

Siti Raihana, Shahadan (2012) Survey of project management methods which employed by fixed position layout in Malaysia. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Ramlah , Badarudin (2012) Preparations and characterization of wolfram doped photocatalyst with mesoporous titanium dioxide (TiO2) via a sol-gel method. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Siti Roseha, Mohd Hamzah (2012) Study on design and modelling of paper fibre recovery network. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Siti Syazwani, Razi (2012) Detection of gram positive and gram negative organisms in sputum quality testing. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Siti Zaharah, Sulaiman (2012) Adsorption of Pb(II), Zn(II) and Fe(II) Using Rubber Seed Shell. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Zuhaila, Zulkepeli (2012) Formulation of natural non-toxic mouthwash lotion from extraction of jathropa curcas latex. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Siva Kumar, Supayah (2012) Preparation and characterization of poly (amidoxime) chelating resin for metal ions removal from water. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Soon Li, Lee (2012) PR excellent creative with integrated event budget calculator (PRECEBC). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Souleyman, Ahmat Issaka (2012) Application of microwave and ultrasonic demulsification techniques on petroleum based emulsions. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Yunus, Rosli).

Steaphnie Saiful, Ahmad Savaran (2012) Formulation and production of facial cream from papaya. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Sudrajad, Agung and Ismail, Ali and Hazmie, Hamdan and Herzwan, Hamzah (2012) Exhaust emissions of DI diesel engine using unconventional fuels. In: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 425-430., 1440. ISSN 0094-243X (Published)

Sudrajad, Agung and Ismail, Ali and Samo, Khalid and Faturachman, Danny (2012) An experimental study of gaseous exhaust emissions of diesel engine using blend of natural fatty acid methyl ester. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-6., 36 (1). ISSN 1757-899X (Published)

Suganthi, Jayaraman (2012) Prediction of grinding machinability when grind aluminium alloy using water based zinc oxide nanocoolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suharti, Md Ishak (2012) Effect of sawdust species and particle size on xylose production. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Suhaya, Sekeri (2012) The effect of waste wash water on the concrete properties. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Sulaiman, Noor Suhana and Rohani, Abu Bakar and Norrozila, Sulaiman (2012) A Review on Soft Computing Technique in Intrusion Detection System. International Journal of Computer, Electrical, Automation, Control and Information Engineering, 6 (12). pp. 1-6. (Published)

Suliana, Abd Ghani and Lafsah, Mat Daud and Noor Zirwatul Ahlam, Naharuddin (2012) Simulation Study Using SIMULINK/MATLAB on THD for PV Grid Connected System. In: International Conference On Green Technology & Ecosystems for Global Sustainable Development 2012(ICGTEC 2012) , 28-30 May 2012 , University of Tuzla, Tuzla, Bosnia & Herzegovina. . (Unpublished) (Unpublished)

Sum, Yong Tat (2012) 24 season drums society management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Sumaiya, Zainal Abidin and F. Haigh, Kathleen and Saha, Basudeb (2012) Esterification of free fatty acids in used cooking oil using ion-exchange resins as catalysts: An efficient pretreatment method for biodiesel feedstock. Industrial and Engineering Chemistry Research, 51 (45). pp. 14653-14664. ISSN 0888-5885. (Published)

Sundara Morthty, Nirmala Devi (2012) Text messaging encryption system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Surain, Sazali (2012) Development of soil characteristics database system for Kuantan area. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Suria, Mahmud (2012) Analytical quantification method of protein denaturation in spray drying. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Sutarto, Auditya Purwandini and Muhammad Nubli, Abdul Wahab and Nora, Mat Zin (2012) Resonant Breathing Biofeedback Training for Stress Reduction Among Manufacturing Operators. International Journal of Occupational Safety and Ergonomics (JOSE), 18 (4). pp. 549-561. ISSN 1080-3548. (Published)

Suziyana, Mat Dahan and Mohd Yusof, Taib and Nurhaizan, Mohd Zainudin and Fadzida, Ismail and Ahmad Nazif, Noor Kamar (2012) Implementation and Analysis of Chemical Hazard Risk Assessment (CHRA) at a Petrochemicals Company, Malaysia. International Journal of Technology Management, 1. pp. 47-56. ISSN 2289-2753. (Published)

Swee Leong, Lee (2012) Potential application derived from the essential oil of pandan leaves (Pandanus Amaryllifolis Roxb.). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Syafiq, Hashim (2012) Investigate the effectiveness of stop drill hole in delaying crack from crack initiation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syafiqah, Mohamed Salleh (2012) Analysis the performance of unsignalized intersection based on gap acceptance studies. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Syahmi, Ahmad Ramly (2012) Design of exhaust gas recirculation system (EGR) for diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syahril Azeem Ong, Haji Maliki Ong (2012) Bearing fault detection using discrete wavelet transform. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syahrina, Ahmad and Mohd Iszuani, Mohd Hassan (2012) Bahasa Jepun Mudah 2. Penerbit Universiti Malaysia Pahang, Universiti Malaysia Pahang, 01-107. ISBN 978967012041515

Syakhsiah , Jaafar (2012) Chemical characteristics of rainwater collected at selected sites around Kuantan. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Syarifuddin, Mohamad (2012) 80 staf diberi pendedahan tentang Kempen Kenali Ubat Anda. CREATE . p. 43. ISSN 1823-7487

Syazana, Noorshirwan (2012) Design and fabrication of driver compartment of an electric Go Kart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syazrina, Ahmad Safawi (2012) Target strength of fish based on echogram. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Syed Muhammad Adib, Syed Mohd Zaki (2012) Productivity improvement via simulation in manufacturing industry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syifak Izhar, Hisham and Liew, Siau-Chuin and Jasni, Mohamad Zain (2012) A Quick Glance at Digital Watermarking in PACS. In: Proceedings of the First International Conference on Computational Science and Information Management (ICoCSIM2012) , 3-5 December 2012 , Toba Lake, North Sumatra, Indonesia. pp. 1-6., 1. ISBN 978-967-0120-60-7 (Published)

T

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2012) Analysis of Laminar Forced Convection of Air for Crossflow Over Two Staggered Flat Tubes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul-De). pp. 755-767. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2012) A Numerical Study of Forced Convection Heat Transfer Over a Series of Flat Tubes Between Parallel Plates. Journal of Mechanical Engineering and Sciences (JMES), 3. pp. 271-280. ISSN 2231-8380 (online). (Published)

Talhah-Abdullah, Amir (2012) Simulation of Hybrid Induction Heating Distillation for Wateroil Mix in Refinery Pond Utilities. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Tan, Wee Yeong (2012) Antibacterial activities of extracts from different parts of Swietenia mahagoni against multiple-drug resistant bacteria. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Tan, Ni Yen (2012) Product simplification design improvement by using DFMA method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tao, Hai (2012) Image watermarking optimization algorithms in transform domains and feature regions. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Taslim, Kassim (2012) Finite element analysis of Arch concrete slab system for upper floors. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Tew, Seow Ting (2012) Phosphorylated orange adsorption gel for removal of selected heavy metals. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Tg Mahizatulazwa, Tg Kamaruddin (2012) Synthesis and characterization of alumina nanofiber filled poly ether ether ketone (PEEK). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Thamir K., Ibrahim and M. M., Rahman (2012) Effect of Comparison Ration on Performance of Combined Cycle Gas Turbine. International Journal of Energy Engineering, 2 (1). pp. 9-14. ISSN 2163-1891 (Print); 2163-1905 (online). (Published)

Thamir K., Ibrahim and M. M., Rahman (2012) Thermal Impact of Operating Conditions on the Performance of a Combined Cycle Gas Turbine. Journal of Applied Research and Technology, 10 (4). pp. 567-577. ISSN 1665-6423. (Published)

Thamir Khalil, Ibrahim (2012) Modeling and performance enhancements of a gas turbine combined cycle power plant. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Mustafizur, Rahman).

Thandayithabani, Maran Pillai (2012) Voltage mode control for buck converter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Thanimalay, Dinesh Raj (2012) Biopetrol synthesized from rubber seed oil through heterogeneous catalytic cracking using zeolites catalyst: effect of acetone in solvent extraction of rubber seed. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Thoiebah, Ahmad Mukhtar (2012) Echocardiogram : left ventricle chamber detection using image processing. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Tuan Abdul Hadi, Tuan Jusoh (2012) Design suitable punch or die to overcome springback on u-bending. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Tuan Nor Imani, Tuan Yusof (2012) Biosorption of copper using rice husk. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

U

UMP, . (2012) 700 mahasiswa UMP berbuka bersama ksu kpt. Utusan Malaysia .

UMP, . (2012) Gembira lanjut pengajian di UMP. Harian Metro .

UMP, . (2012) Jalinan mesra UMP di Sabah. Berita Harian .

UMP, . (2012) Lebih 300 warga Universiti Malaysia Pahang hadiri program selamatkan Gaza. Utusan Malaysia .

UMP, . (2012) Lynas bukan loji nuklear,hanya kilang kimia. Utusan Malaysia .

UMP, . (2012) SAE UMP Chapter dinobat pasukan terbaik Shell Eco-Marathon. Utusan Malaysia .

UMP, . (2012) Seramai 40 mahasiswa UMP laksana kerja amal. Sinar Harian .

UMP, CMLHS (2012) Training of trainers (Tot) by Soft Skills Department. Ilham, 9 . p. 12. ISSN 1985-157X

UMP, LIB (2012) Komuniti. Kosmo .

UMP, PNC (2012) 1,364 pelajar terima wang pendahuluan PTPTN masuk ke IPT. CREATE . p. 27. ISSN 1823-7487

UMP, PNC (2012) 100 mahasiswa jayakan program Kampus Hijau. CREATE . pp. 34-35. ISSN 1823-7487

UMP, PNC (2012) 120 peserta Sinar ECER berkampung di UMP Kampus Gambang. CREATE . pp. 12-13. ISSN 1823-7487

UMP, PNC (2012) 130 hasil penyelidikan dalam pameran Citrex 2012. CREATE . p. 24. ISSN 1823-7487

UMP, PNC (2012) 130 peserta hadir Seminar Bijak Mengurus Wang. CREATE . p. 39. ISSN 1823-7487

UMP, PNC (2012) 2 pelajar NIU pelajari komunikasi autentik dalam BMFIS. CREATE . p. 25. ISSN 1823-7487

UMP, PNC (2012) 2,000 pengunjung meriahkan sambutan Malam Kebudayaan Tahun Baharu Cina. CREATE . p. 15. ISSN 1823-7487

UMP, PNC (2012) 28 sukarelawan jayakan Program Semai Bakti. CREATE . p. 48. ISSN 1823-7487

UMP, PNC (2012) 31 pingat diraih penyelidik dalam ITEX 2012. CREATE . p. 20. ISSN 1823-7487

UMP, PNC (2012) 344 kaki pancing rebut juara di Pertandingan Memancing Terbuka UMP. CREATE . p. 52. ISSN 1823-7487

UMP, PNC (2012) 4 pelajar Kejuruteraan Awam cipta sejarah di Taiwan. CREATE . p. 27. ISSN 1823-7487

UMP, PNC (2012) 40 peserta Ekspedisi UMP dekati masyarakat Sabah. CREATE . p. 30. ISSN 1823-7487

UMP, PNC (2012) 450 pelajar IPT sertai Cabaran Berkayak Sungai Pahang 2012. CREATE . p. 41. ISSN 1823-7487

UMP, PNC (2012) 500 pelajar jayakan Larian Kampus Pekan 2012. CREATE . p. 36. ISSN 1823-7487

UMP, PNC (2012) 97 pelajar IT terpilih sertai Program Infosys ‘Campus Connect’. CREATE . p. 40. ISSN 1823-7487

UMP, PNC (2012) Affin Islamic Bank sumbang RM100 ribu dana endowmen. CREATE . p. 11. ISSN 1823-7487

UMP, PNC (2012) Akademi Sains Malaysia berkunjung ke UMP. CREATE . p. 16. ISSN 1823-7487

UMP, PNC (2012) Centralised laboratory. Quest, 8 (5). p. 2. ISSN 1985-8159

UMP, PNC (2012) Delegasi Sudan tinjau peluang kerjasama. CREATE . p. 19. ISSN 1823-7487

UMP, PNC (2012) Delegasi UTY Indonesia lawat UMP. CREATE . p. 18. ISSN 1823-7487

UMP, PNC (2012) FIST anjur persidangan ICONT bincang teknologi nano. CREATE . p. 22. ISSN 1823-7487

UMP, PNC (2012) FKEE anjur Celik Elektronik dedah bidang robotik untuk pelajar sekolah. CREATE . p. 28. ISSN 1823-7487

UMP, PNC (2012) ICT Business Centre kongsi kepakaran bersama rakan niaga. CREATE . p. 45. ISSN 1823-7487

UMP, PNC (2012) Iftar bersama jalin hubungan erat UMP - Media Kuantan. CREATE . p. 37. ISSN 1823-7487

UMP, PNC (2012) KSU KPT berbuka puasa dan bersahur bersama warga UMP. CREATE . p. 10. ISSN 1823-7487

UMP, PNC (2012) Karnival Kerjaya dan Keusahawanan tawar 300 peluang pekerjaan. CREATE . p. 31. ISSN 1823-7487

UMP, PNC (2012) Kolaborasi UMP dan MBM lahirkan generasi belia berpengetahuan. CREATE . p. 42. ISSN 1823-7487

UMP, PNC (2012) Laman Web Rasmi UMP bertaraf 5 bintang. CREATE . p. 44. ISSN 1823-7487

UMP, PNC (2012) Mahasiswa In-Smartive bantu pelajar sekolah menguasai bahasa Inggeris. CREATE . p. 50. ISSN 1823-7487

UMP, PNC (2012) Malam Anugerah Cendekia Bitara iktiraf penyelidik, pensyarah cemerlang. CREATE . pp. 4-5. ISSN 1823-7487

UMP, PNC (2012) Malam Puisi Riong cetus sinergi generasi baharu. CREATE . pp. 10-11. ISSN 1823-7487

UMP, PNC (2012) Malam Santai Budaya kenali masyarakat 3 negara. CREATE . p. 46. ISSN 1823-7487

UMP, PNC (2012) Maulidur Rasul disambut meriah. CREATE . p. 30. ISSN 1823-7487

UMP, PNC (2012) Menteri mentor lancar koperasi UMP. CREATE . pp. 6-7. ISSN 1823-7487

UMP, PNC (2012) Pelajar sekolah berkayuh ke UMP sambut kemerdekaan. CREATE . p. 45. ISSN 1823-7487

UMP, PNC (2012) Pengetua dan Felo Kolej Kediaman lawat anak yatim Permata. CREATE . p. 39. ISSN 1823-7487

UMP, PNC (2012) Penyelidik cipta nama di INPEX Amerika Syarikat. CREATE . p. 18. ISSN 1823-7487

UMP, PNC (2012) Persidangan ICG Tech manfaatkan kerjasama dua hala UMP dan University of Tuzla. CREATE . p. 19. ISSN 1823-7487

UMP, PNC (2012) Profesor Datin Nasly perkenal rumah mampu milik menggunakan Sistem Industri CCA. CREATE . p. 21. ISSN 1823-7487

UMP, PNC (2012) SME-University Internship buka peluang pelajar tawar khidmat perundingan perniagaan. CREATE . p. 38. ISSN 1823-7487

UMP, PNC (2012) SeMAMPAN anjur Forum Bicara Nadir Bumi. CREATE . p. 17. ISSN 1823-7487

UMP, PNC (2012) Seminar DSSCM II pupuk kesedaran keselamatan budaya kerja selamat. CREATE . p. 28. ISSN 1823-7487

UMP, PNC (2012) Staf manfaatkan Hari Bertemu Pelanggan. CREATE . p. 37. ISSN 1823-7487

UMP, PNC (2012) Tengku Mahkota Pahang rasmi Empower ECER Mahkota Kuala Pahang. CREATE . p. 4. ISSN 1823-7487

UMP, PNC (2012) Tun Mahathir terima Anugerah Ijazah Kehormat Doktor Kejuruteraan Automotif. CREATE . p. 6. ISSN 1823-7487

UMP, PNC (2012) UMP buka tirai Sukan MASUM 2012. CREATE . p. 53. ISSN 1823-7487

UMP, PNC (2012) UMP dan Politeknik LP3I Indonesia jalin kerjasama strategik. CREATE . p. 13. ISSN 1823-7487

UMP, PNC (2012) UMP fokus inovasi capai universiti pilihan utama. CREATE . pp. 8-9. ISSN 1823-7487

UMP, PNC (2012) UMP kibar Jalur Gemilang semarakkan Sambutan Bulan Kemerdekaan Ke-55. CREATE . p. 33. ISSN 1823-7487

UMP, PNC (2012) UMP menang pingat emas dan anugerah khas dalam EUROINVENT 2012. CREATE . p. 26. ISSN 1823-7487

UMP, PNC (2012) UMP pengendali program kolaborasi perkongsian pintar Kolej Komuniti. CREATE . p. 17. ISSN 1823-7487

UMP, PNC (2012) UMP perkukuh hubungan bilateral dengan UoS. CREATE . p. 20. ISSN 1823-7487

UMP, PNC (2012) UMP terima bantuan wang zakat. CREATE . p. 31. ISSN 1823-7487

UMP, PNC (2012) UMP terima kunjungan pengurusan tertinggi Affin Bank. CREATE . p. 41. ISSN 1823-7487

UMP, PNC (2012) UMP tuan rumah Debat Perdana Intergriti. CREATE . p. 14. ISSN 1823-7487

UMP, PNC (2012) UMP, JPS timba kepakaran teknologi Korea urus sungai. CREATE . p. 40. ISSN 1823-7487

UMP, PNC (2012) UMP, PKNP jalin kerjasama dalam merancakkan industri tenunan Pahang. CREATE . p. 12. ISSN 1823-7487

UMP, PNC (2012) UMP- UTY kongsi amalan terbaik dalam bidang penyelidikan dan paten. CREATE . p. 14. ISSN 1823-7487

UMP, PNC (2012) UMP-KKTM bakal jalin kerjasama dalam bidang pendidikan dan latihan. CREATE . p. 43. ISSN 1823-7487

Ulianas, Alizar and Heng, Lee Yook and Sharina, Abu Hanifah and Tan, Ling Ling (2012) An electrochemical DNA microbiosensor based on succinimide-modified acrylic microspheres. Sensors, 12 (5). pp. 5445-5460. ISSN 1424-8220. (Published)

Umaimah, Mohamed Khir (2012) BTX treatment from petrochemical wastewater using Pseudomonas Putida. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Umi Najwa, Maulad Mohd Noor (2012) Optimize The Production Of Charcoal From Local Bio-Material. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ummu Atirah , Hanipah (2012) Study the energy recovery in acrylic boiler /. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Ummu Kulthum, Jamaludin and Docherty, Paul D. and Chase, J. Geoffrey and Le Compte, Aaron and Shaw, Geoffrey M. and Desaive, Thomas and Preiser, Jean-Charles (2012) Observation of Incretin Effects During Enteral Feed Transitions of Critically Ill Patients. e-SPEN Journal, 7 (4). pp. 154-159. ISSN 1751-4991. (Published)

V

Valerian Victor, Kong (2012) Elucidation of Sonochemical Reaction Kinetics of Biodiesel Production from Jatropha Oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Valliammai, S.Palaniappan (2012) Investigation of cast resin transformer manufacturing in AM SGB Sdn Bhd. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Vidhyaa, Parooindran (2012) Antioxidant activity of different fractions from Tinospora crispa stems extracts. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

W

Wafa', Mohd Salleh (2012) Assessment of rainfall and wind induced soil erosion at Cameron Highlands, Pahang, Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Wahida, Mat Zin (2012) Kuantan clay subgrade stabilization by using carpet fibers as stabilizer. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Wai Mun, Yap (2012) Production of methane from palm oil mill effluent by using iltrasonicated membrane anaerobic system (UMAS). Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Wan Ainur Afeeqa, Wan Azmi (2012) Futsal court management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Wan Aliuddin, Wan Razdi (2012) Characterization and modification of castor oil extracted from the newly malaysian produced castor beans. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Wan Anuar, Wan Hassan and Kahar, Osman and Mohammed Rafiq, Abdul Kadir and Wan Ahmad Kamil, Wan Abdullah and Juhara, Haron and Mohd Zamani, Ngali (2012) Effect of anastomosis angle on hemodynamic of side-to-end radiocephalic arteriovenous fistula (RCAVF). In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 665-670., 1440 (665). ISSN 0094-243X (Published)

Wan Anwar Faiz, Wan Nasaruddin (2012) Oil palm shell (OPS) as fine aggregate in concrete properties. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Wan Hafizee , Wan Zulkiflee (2012) Design and development of noise reduction device for hand drilling machine. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Wan Ismail, Ibrahim and Amir, A.S.M (2012) Multi-Station Short Baseline Lightning Monitoring System. In: 16th Asian Conference on Electrical Discharge (ACED) , 10-13 December 2012 , The Zon Legacy By The Sea, Johor Bahru. . (Unpublished) (Unpublished)

Wan Ismail, Ibrahim and Mohd Riduwan, Ghazali (2012) Measurements of Electric and Magnetic Fields due to Lightning Strokes Based on Single-station Detection. In: 2012 IEEE Asia Pacific Conference on Applied Electromagnetics (APACE2012) , 11-13 December 2012 , Avillion Legacy Melaka. . (Submitted) (Submitted)

Wan Ismail, Ibrahim and Mohd Riduwan, Ghazali (2012) An Overview of Pekan Lightning Detection System (PLDS). In: IEEE International Conference on Power and Energy (PECON 2012) , 2-5 December 2012 , Kota Kinabalu, Sabah, Malaysia. pp. 718-723.. ISBN 978-1-4673-5019-8 (Published)

Wan Ismail, Ibrahim and Mohd Riduwan, Ghazali and Mohd Zaidi, Mohd Tumari (2012) Development of Straight Line Robot Movement Using Digital Compas Module. In: The 6th International Conference on Soft Computing and Intelligent System & The 13th International Symposium on Advanced Intelligent System , 20-24 Nov 2012 , Kobe, Japan. 1409-1413 .. (Submitted) (Submitted)

Wan Jumani, Fauzi (2012) ML restructuring workshop. Ilham, 9 . p. 7. ISSN 1985-157X

Wan Khairul Azizi, Wan Dris (2012) Study on the composition of municipal solid waste in Mahkota Aman commercial area. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Wan Maseri, Wan Mohd and Beg, Abul Hashem and Herawan, Tutut and Fazley Rabbi, Khandakar (2012) MaxD K-Means: A clustering algorithm for auto-generation of centroids and distance of data points in clusters. Communications in Computer and Information Science, 316. pp. 192-199. (Published)

Wan Mohd Ariff, Wan Azli (2012) Single objective optimization of EDM machining on titanium workpiece using Taguchi method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Hafizuddin, Wan Yussof (2012) Ce-405: Evaluation of Quaternary Ammonium Catalysts for Transesterification of Triglycerides. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012 , 3-5 July 2012 , Meritus Pelangi Beach Resort & Spa, Langkawi, Kedah. . (Published)

Wan Mohd Hafizuddin, Wan Yussof (2012) Evaluation of heterogeneous quaternary ammonium catalyst for transesterification of trigycerides. PhD thesis, Newcastle University (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Mohd Hanif, Othman (2012) Simulation of center location of fluid flow in shear driven cavity using lattice Boltzmann method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Hazwan, Wan Ariff (2012) Video imaging study of ethanol- gasoline blends fuel spray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Huzaifi, W Ibrahim (2012) A Study on Temperature Control System For Biomass Gasification Process. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Mohd Rashdan, Wan Mansor (2012) Development of high pressure spray triggering. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Muhamad Irfan Hilmi, Wan Harun (2012) Optimization of air intake system for inline-4 diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Muhammad Hafizi, Wan Hassan (2012) Resistance spot welding of stainless steel and mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Muhammad Syahmi, Wan Muhammad (2012) Design of minimum water network for global water operation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Wan Muhd Farid, Wan Hamat (2012) Bioethanol Production from Sugar Cane Molasses. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Nazrul Helmy, Wan Mohd Zain (2012) 187 calon UPSR Daerah Jempol terima manfaat Projek Kilauan Mutiara. CREATE . p. 44. ISSN 1823-7487

Wan Nazrul Helmy, Wan Mohd Zain (2012) Alumni UMP gah di Volvo. CREATE . p. 56. ISSN 1823-7487

Wan Nazrul Helmy, Wan Mohd Zain (2012) Kem Interaksi Pemimpin Muda bentuk kepimpinan pelajar SMK Chini. CREATE . p. 51. ISSN 1823-7487

Wan Nazrul Helmy, Wan Mohd Zain (2012) Mahasiswa turun padang dalam Projek Semaian Budi di Agropolitan Lepar. CREATE . p. 49. ISSN 1823-7487

Wan Nazrul Helmy, Wan Mohd Zain (2012) Sempurnakan amanah kepimpinan dengan penuh kesedaran – NC. CREATE . p. 29. ISSN 1823-7487

Wan Norlinda Roshana, Mohd Nawi (2012) Kajian keberkesanan sisa ekstrak patchouli (Pogostemon Cablin) terhadap kesan menghalau tikus sawah (Rattus Argentiventer). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Haji Rosli, Mohd Yunus).

Wan Nur Azhani, W. Samsudin and Kamarul Hawari, Ghazali (2012) Motion detection using Horn-Schunck optical flow. In: International Conference on Future Generation Communication and Networking , 16-19 December 2012 , Gangneug, South Korea. pp. 202-209., 350. ISSN 18650929 ISBN 978-364235593-6 (Published)

Wan Nur Farhanah , Wan Zakaria (2012) Ant colony optimization (ACO) algorithm for CNC route problem. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Wan Nur Hidayu, Wan Ja’afar (2012) Hostel management system (HMS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Wan Nuratiqah Ilyani, Wan Yusoff (2012) Bearing capacity of fiber reinforced soil. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Wan Nurmaisarah, Wan Hamaruddin (2012) Study of heat transfer in plate heat exchanger by using CFD simulation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Wan Shalamyza , Wan Husin (2012) Time domain analyis of acoustic emissions signal for milling process. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Wan Zulaisa Amira, Wan Jusoh (2012) Study on the adsorption of zinc from waste ipa by using granular activated carbon. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Wang, Jing and Muhammad Nubli, Abdul Wahab and Abdalla, Ahmed N. and Gu, Ming and Liu, Yao and Hanisah, Mohd Noor (2012) The Influence of Relaxation with Electromyography and Islamic Prayer Programs for Female Muslim. International Journal of the Physical Sciences, 7 (22). pp. 2897-2904. ISSN 1992-1950. (Published)

Wei, Yeap Jia (2012) Ecommerce using search engine optimization. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Wi Ven, Lai (2012) Production of methane from poultry manure. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Widodo Budi, Santoso and R. A., Bakar and Sugeng, Ariyono and Nur, Cholis (2012) Study of Cyclic Variability in Diesel-Hydrogen Dual Fuel Engine Combustion. International Journal of Mechanical & Mechatronics Engineering, 12 (4). pp. 52-56. ISSN 2077-124X. (Published)

Wong, Michael Sie Ung (2012) Simulation behaviour of fire response to fire resistance steel beams /. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Wong, Wei Leong (2012) Implementation of ump course registration system using heuristic method. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Wong, Chun Yuan (2012) Portable electronics queue control system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Wong, Kam Man (2012) Automated teller machine using UMP smart card in DB2. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Wong, Ying Yin (2012) Smart online electrical billing management system (SOEBIMS) using GSM. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Wong , Pei Yin (2012) Shear strength of fibre reinforced clay soil. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

X

Xiao, Rui (2012) Lane markings detection based on e-maxima transformation and improved hough. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kamarul Hawari, Ghazal).

Y

Yang, Jian Yu (2012) Homestay Online Booking and Management System. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Yanti Salina, Shaari (2012) German for Beginners. Penerbit UMP, Kuantan, Pahang. ISBN 978-967-0120-52-2

Yap, Suet Lee (2012) Assignation of PSM evaluator using genetic algorithm. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Yasmin, Abdul Wahab and Iskandar, Rizan Muhamad and Shahrizal, Saat (2012) Identification of Water/Solid Flow Regime Using Ultrasonic Tomography. In: International Conference on System Engineering and Technology (ICSET 2012) , 11-12 September 2012 , Institut Teknologi Bandung, Indonesia. pp. 1-5.. ISBN 978-1-4673-2376-5 (Published)

Yasotha, Padmanathan (2012) Multi-entrances security door system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Yen Leng, Lim (2012) ATM locator mobile application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Yogeswaran, Muthusamy (2012) Prediction of grinding machinability when grind P20 tool steel using water based ZnO nano-coolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yogeswaran, Muthusamy (2012) Prediction of grinding machinability when grind P20 tool steel using water based ZnO nano-coolant. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Yong, Ying Mei (2012) CMLHS Eid Celebration. Ilham, 9 . p. 17. ISSN 1985-157X

Yuhani, Yusof and Nor Haniza, Sarmin and Goode, T. Elizabeth (2012) Hierarchy of Certain Types of DNA Splicing Systems. International Journal of Modern Physics: Conference Series, 9. pp. 271-277. ISSN 2010-1945. (Published)

Yunus, Rosli Mohd and Isha, Ruzinah and Zainal Abidin, Sumaiya and Abdul Rasid, Ruwaida (2012) Production of biodiesel from used cooking oil. , [Research Report] (Unpublished)

Yunus, Rosli Mohd and Razali, Mohd Najib and Jemaat, Zulkifly (2012) Development of chitosan based adsorbent for removal of oil from industrial wastewater. , [Research Report] (Unpublished)

Yusra Yaseen, Lazim and Noor Azlinna, Azizan (2012) The Influence of Human Resources Management Practices & Employees' Outcomes in the Organizational Performance of Small Businesses in Baghdad. International Journal of Technology Management (1). pp. 77-88. ISSN 2289-2753. (Published)

Yusriha , Mohd Yusoff (2012) Effect of banana skin on biodegradable NR latex. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Yuvarajan Naidu, Thanarajan (2012) Design and fabrication of leak test rig. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Z

Z., Ismail and Z., Ibrahim and Ong, A. Z. C. and A. G. A., Rahman (2012) Approach to reduce the limitations of modal identification in damage detection using limited field data for nondestructive structural health monitoring of a cable-stayed concrete bridge. Journal of Bridge Engineering, 17 (6). pp. 867-875. ISSN 1084-0702. (Published)

Z. A., Abdul Majid and N., Hazali and M. A. K. M., Hanafiah and Abdul Adam, Abdullah and A. F., Ismail and M. H., Ruslan and K., Sopian and M. S., Mohd Azmi (2012) Design and performance of 20 watts portable solar generator. In: 1st International Conference on Mechanical Engineering Research , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-6., 36 (1). ISSN 1757-899X (Published)

Z. M., Hafizi and Epaarachchi, J. and Che Ku Eddy Nizwan, Che Ku Husin and Lau, K. T. (2012) Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (1). ISSN 1757-899X (Published)

Z. M., Hafizi and Epaarachchi, J. and Lau, K. T. (2012) Modal Analysis Of High Frequency Acoustic Signal Approach For Progressive Failure Monitoring In Thin Composite Plates. In: 2nd Malaysian Postgraduate Conference (MPC2012) , 7-9 July 2012 , Bond University, Gold Coast, Queensland, Australia . pp. 61-66.. (Published)

Zafril Rizal, M Azmi and Herawan, Tutut and Kamalrulnizam, Abu Bakar and Abdul Hanan, Abdullah and Mohd Shahir, Shamsir (2012) Combinatorial Rules Approach to Improve Priority Rules Scheduler in Grid Computing Environment. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 259-265.. (Published)

Zahari, Taha and Jessnor Arif, Mat Jizat (2012) A Comparison of Two Approaches for Collision Avoidance of an Automated Guided Vehicle Using Monocular Vision. Applied Mechanics and Materials, 145. pp. 547-551. ISSN 1662-7482. (Published)

Zahari, Taha and Jessnor Arif, Mat Jizat (2012) Landmark Navigation in Low Illumination Using Omnidirectional Camera. In: The 9th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI 2012) , 26-28 November 2012 , Daejeon Convention Center (DCC), Daejeon, Korea. . (Unpublished) (Unpublished)

Zahari, Taha and Jessnor Arif, Mat Jizat and Ismayuzri, Ishak (2012) Bar Code Detection Using Omnidirectional Vision for Automated Guided Vehicle Navigation. In: International Conference for Automatic Control and Artificial Intelligence 2012 , 24-27 March 2012 , Xiamen, China. . (Unpublished) (Unpublished)

Zahari, Taha and Sarkawt, Rostam (2012) A hybrid fuzzy AHP-PROMETHEE decision support system for machine tool selection in flexible manufacturing cell. Journal of Intelligent Manufacturing, 23 (6). pp. 2137-2149. ISSN 1572-8145. (Published)

Zahari, Taha and Soewardi, Hartomo and Siti Zawiah, Md Dawal (2012) Color preference of the Malay population in the design of a virtual environment. In: IEEE 18th International Conference on Virtual Systems and Multimedia: Virtual Systems in the Information Society (VSMM 2012) , 2-5 September 2012 , Milan, Italy. pp. 545-548.. ISBN 978-1-4673-2564-6 (Published)

Zahrizan, Zakaria and Nasly, Mohamed Ali and Amanda, Marshall Ponting and Ahmad Tarmizi, Haron and Zuhairi, Abd Hamid (2012) An Exploratory Study on the Potential of Implementing Building Information Modelling (BIM) in Malaysian Construction Industry: Lesson Learnt from Singapore and Hong Kong Construction Industry. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 1-6. ISSN 2180-2742. (Published)

Zahrizan, Zakaria and Nasly, Mohamed Ali and Amanda, Marshall-Ponting and Ahmad Tarmizi, Haron and Zuhairi, Abd. Hamid (2012) The potential of implementing Building Information Modelling (BIM) in Malaysian Construction Industry: An exploratory study. In: Proceeding National Conference for Postgraduate Research (NCON-PGR 2012) , 8-9 September 2012 , Universiti Malaysia Pahang. pp. 1-15.. (Published)

Zaihin, Mohd Zahib (2012) Development of bicycle powered water pump. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zailani, Abdullah and Herawan, Tutut and Noraziah, Ahmad and Mustafa, Mat Deris (2012) DFP-growth: An efficient algorithm for mining frequent patterns in dynamic database. In: 3rd International Conference on Information Computing and Applications (ICICA 2012) , 14-16 September 2012 , Chengde, China. pp. 51-58.. ISSN 0302-9743 ISBN 978-3-642-34062-8 (Published)

Zailin Shah, Yusoff and Nik Aloesnita, Nik Mohd Alwi and Ainol Haryati, Ibrahim (2012) Investigating Students' Perception of Using Wikis in Academic Writing. 3L: The Southeast Asian Journal of English Language Studies, 18 (3). pp. 91-102. ISSN 0128-5157 . (Published)

Zainah, Md. Zain (2012) Underactuated control for an autonomous underwater vehicle with four thrusters. EngD thesis, Okayama University (Contributors, Thesis advisor: Watanabe, Keigo).

Zainol, Mustafa and Norbayani, Basri and Norkisme, Zainal Abidin and Nur Riza, Mohd Suradi and Zalina, Mohd Ali and Faridatul Azna, Ahmad Shahabudin and M. R., Abdul Hamid (2012) Modeling of Engineering Student Satisfaction. Journals of Mathematics and Statistics, 8 (1). pp. 64-71. ISSN 1549-3644 . (Published)

Zajalara, Mat Lazi (2012) Stress analysis of the various dimensions of the spring. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zalida Wati, Ahmad (2012) Head count for thermal images in H1N1 screening at KLIA. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Zamani, Ngali and Kahar, Osman and Nasrul Hadi, Johari (2012) Splitting solver with immersed boundary extension for the analysis of backward-facing step flow. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 1040-1048., 1440 (1040). ISSN 0094-243X (Published)

Zamri, Mohamed and Egab, Laith and Wang, Xu (2012) Tyre Cavity Coupling Resonance and Countermeasures. In: Proceedings of the 4th International Conference on Noise, Vibration and Comfort (NVC 2012) , 26-28 November 2012 , Hotel Melia, Kuala Lumpur. pp. 7-12.. (Published)

Zamri, Mohamed and Sainty, Samuel and Tawaf, Anthony and Richard, Jonathon and Wang, Xu (2012) Analysis Of Potential Solutions To Audible Tire Cavity And Rim Coupling Resonance Noise. In: ASME 2012 Noise Control and Acoustics Division Conference at InterNoise 2012 , 19-22 August 2012 , New York City, USA. pp. 15-21.. (Published)

Zamri, Harun and Mohamad Dali, Isa and Zamri, Mohamed and Shahrum, Abdullah (2012) The Contributions of Professional Engineers at the Instituitions of Higher Learning. Procedia Social and Behavioral Sciences, 102. pp. 221-227. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Zeon Poee, Liang (2012) Reputation system for an e-commerce system using fuzzy logic. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Zetty Akhtar, Abd Malek (2012) Investigation on weld quality using different filler metals. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zhao, Yanxi and Zhang, Yuhua and Chen, Jian and Li, Jinlin and Liew, Kong Yong and Mohd Ridzuan, Nordin (2012) SBA-16-Supported Cobalt Catalyst with High Activity and Stability for Fischer–Tropsch Synthesis. ChemCatChem, 4. pp. 265-275. ISSN 1867-3899. (Published)

Zul Rasyied, Ab. Rasat (2012) Speaker recognition using neural network. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Zul Shukri, Nawawi (2012) Modelling of material removal rate on grinding ductile iron using water based SIO2 nanocoolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulfadhli, Mohd (2012) Design formulation of rabbit feed based on palm kernel cake (PKC) and oil palm frond (OPF). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Zulfadhli, Sohok (2012) Design & develop automatic battery cyclic tester. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Zulfadli Adha, Nadzri (2012) Design and fabricate welding machine cart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulhazleen, Mohd Zulkipli (2012) Separation Fermentation Products by Using Batch Distillation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Zulhilmi, Shafie (2012) Design B-Series propeller of traditional fishing vessel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zuliza Amina , Zulkifli (2012) Effective safety management ethics for construction industry. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Zulkifli, Ahmad@Manap and Ahmad Rasdan, Ismail and Mohd Azrul Hisham, Mohd Adib and Nasrul Hadi, Johari (2012) Probabilistic Analysis of the Human Vertebra Under Compressive Loading. In: 2nd Regional Conference on Applied and Engineering Mathematics 2012 , 30-31 May 2012 , Eastern & Oriental Hotel, Penang, Malaysia . . (Unpublished) (Unpublished)

Zulkifli, Nawawi (2012) Vibration investigation for passenger car with different damping characteristics on car suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulkifli, Ahmad@Manap (2012) Analisis kepatahan ke atas vertebra lumbar tulang belakang menggunakan kaedah unsur terhingga dan monte carlo. Masters thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Zulkifli, Ahmad@Manap and A. K., Ariffin (2012) Monte Carlo analysis of the human vertebra based on compressive loading. International Journal of Mechanical & Mechatronics Engineering, 12 (5). pp. 69-73. ISSN 2077-124X. (Published)