Items where Subject is "T Technology > TS Manufactures"

Article

A., Asogan and N., Sazali and F. M., Said and R. Z., Edros and M. F., Ghazali and S. A., Che Ghani (2023) A Mini Review on Working Mechanism, Standard Operating Procedure (SOP) and Preventative Maintenance of Low Temperature Long Term (LTLT) Milk Pasteurizer. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (1). pp. 24-29. ISSN 2636-9575. (Published)

A., Hameed and Oudah, Ali A. (2014) On The Impact of User Payload on Deployment Requirements of LTE Networks. Wseas Transactions On Communications, 13. pp. 348-354. ISSN 2224-2864. (Published)

A. N., Oumer and Abdulwehab A., Ibrahim and Nuruzzaman, D. M. and Khairi, Yusuf (2016) Simulation on Effect of Flow Induced Fiber Orientation on the Mechanical Properties of Fiber Reinforced Composites. ARPN Journal of Engineering and Applied Sciences, 11 (18). 10931 -10934. ISSN 1819-6608. (Published)

A. R., Yusoff and Mohamad Syahmi, Shahrom (2014) Review of Aluminum Chip Machining Using Direct Recycling Process. Advanced Materials Research, 903. pp. 157-162. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

A. R., Yusoff and Mohamed Reza Zalani, Mohamed Suffian and Mohd Yusof, Taib (2011) Literature Review of Optimization Techniques for Chatter Suppression In Machining. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 47-61. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. Razak, J. and Mohamad, N. and Mahamood, M. A. and Jaafar, R. and Othman, I. S. and Ismail, M. M. and Tee, L. K. and Ramli, Junid and Mustafa, Z. (2019) On the preparation of EPDM-g-MAH compatibilizer via melt-blending method. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5424 -5440. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ab Rahman, Nur Naajihah and Nafrizuan, M. Y. and Zainal Abidin, Nuril Aqilah (2022) Investigation of the performance of PID control scheme for linear conveyor system of manufacturing shopfloor. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 1-7. ISSN 2637-0883. (Published)

Abduaziz, Oumer and Jack, Kie Cheng and Razman, Mat Tahar and Ramaraju, Ramgopal Varma (2015) A hybrid Simulation model for Green Logistics Assessment in Automotive Industry. Procedia Engineering, 100. pp. 960-969. ISSN 1877-7058. (Published)

Abdul Haleem, Habeeb Mohamed and Muhammad Aizzat, Zakaria (2019) Torque control analysis of platform based end effector ankle foot orthosis for rehabilitation. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 35-38. ISSN 2637-0883. (Published)

Abdul Haleem, Habeeb Mohamed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Anwar P. P., Abdul Majeed and Mohamad Heerwan, Peeie (2020) Rain classification for autonomous vehicle navigation : A support vector machine approach. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 74-80. ISSN 2637-0883. (Published)

Abdul Halim, Abdul Razik and Khor, Cheng Seong and Elkamel, Ali (2019) A model-based approach for biomass-to-bioproducts supply chain network planning optimization. Food and Bioproducts Processing, 118. pp. 293-305. ISSN 0960-3085. (Published)

Abdul Rahim, Jalil and Muhammad Sharfi, Najib and Suhaimi, Mohd Daud and Mujahid, Mohamad and Saiful Nizam, Tajuddin and Che Mohd Aizal, Che Mohd and Razam, Abd Latip and Mohammad Saiful Nizam, Ismail and Mohamad Nor Azizi, Shabudin and Wan Rusyidah, W. Rusik (2020) Intelligent classification of palm oil tree pollination using E-nose. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 28-37. ISSN 2637-0883. (Published)

Abdul Syakir, Abdul Mubin and Norhafizan, Ahmad and Azuddin, Mamat and Zahari, Taha and Iskandar, Hasanuddin (2015) CFD Study of Drag and Lift of Sepak Takraw Ball at Different Face Orientations. Advances in Mechanical Engineering, 7 (1). pp. 1-10. ISSN 1687-8132 (Print); 1687-8140 (Online). (Published)

Abdullah, Arif and M. F. F., Ab Rashid and Ponnambalam, S. G. and Zakri, Ghazalli (2019) Energy efficient modeling and optimization for assembly sequence planning using moth flame optimization. Assembly Automation, 39 (2). pp. 356-368. ISSN 0144-5154. (Published)

Abdullah, N. A. Z. and Asri, M. N. A. M. and M. S. M., Sani (2022) Strategies of finite element modeling for spot welded joints and its modal correlation with experimental data. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9543-9550. ISSN 2180-1606. (Published)

Abdullah Make, Muhammad Razif and M. F. F., Ab Rashid and Razali, Muhamad Magffierah (2016) A Review of Two-sided Assembly Line Balancing Problem. International Journal of Advanced Manufacturing Technology. pp. 1-21. ISSN 0268-3768 (Print), 1433-3015 (Online). (In Press / Online First) (In Press / Online First)

Abdulrazak, Lway Faisal and Oudah, Ali A. (2015) Interference Mitigation Technique Through Shielding and Antenna Discrimination. International Journal of Multimedia and Ubiquitous Engineering (IJMUE), 10 (3). pp. 343-352. ISSN 1975-0080. (Published)

Abdulwahid, Arman and Hagos, F. Y. and Abdul Adam, Abdullah and Abd Rashid, Abd Aziz and R., Mamat and Cheng, C. K. and Vo, Dai-Viet N. (2020) Kinetic and CFD Modeling of Exhaust Gas Reforming of Natural Gas in a Catalytic Fixed‐Bed Reactor for Spark Ignition Engines. Chemical Engineering and Technology, 43 (4). pp. 705-718. ISSN 1521-4125. (Published)

Abu-Samah, Asma and Normy Norfiza, Abdul Razak and Ummu Kulthum, Jamaludin and Fatanah, M. Suhaimi and Azrina, M. Ralib (2019) Determination of favorable blood glucose target range for stochastic TARgeted (STAR) glycemic control in Malaysia. Indonesian Journal of Electrical Engineering and Computer Science, 15 (1). pp. 133-141. ISSN 2502-4752. (Published)

Afifuddin Arif, Shihabuddin Arip and Norazlianie, Sazali and Kadirgama, Kumaran and Ahmad Shahir, Jamaludin and Faiz, Mohd Turan and Norhaida, Ab. Razak (2024) Object Detection for Safety Attire Using YOLO(You Only Look Once). Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 37-51. ISSN 2289-7895. (Published)

Ahamed, Nizam Uddin and Ahmed, Nasim and Ali, Md. Sharafat and Ahmad, Badlishah and Rahman, S. A. M. Matiur (2014) Analysis EDFA Gain in OCDMA System for Fiber-to-the-Home Network. International Journal of Microwave & Optical Technology (IJMOT), 9 (3). pp. 244-248. ISSN 1553-0396. (Published)

Ahmad, Redza and Toshiki, Kondo and Toshiaki, Yasui and Masahiro, Fukumoto (2016) High Anatase Rate Titanium Dioxide Coating Deposition by Low Power Microwave Plasma Spray. IOP Conference Series: Materials Science and Engineering, 114 (012031). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Ahmad Faizal, Mohd Zain and Jia, Wei Low and Nafarizal, Nayan and Mohd Zainizan, Sahdan and Mohd Khairul, Ahmad and Ali Yeon, Md Shakaff and Ammar, Zakaria (2015) Spectroscopic Studies of Magnetron Sputtering Plasma Discharge in Cu/O2/Ar Mixture for Copper Oxide Thin Film Fabrication. Jurnal Teknologi (Sciences and Engineering), 73 (1). pp. 11-15. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Ahmad Fakhri, Ab. Nasir and M Nordin, A Rahman and Nashriyah, Mat and Abd Rasid, Mamat and Ahmad Shahrizan, Abdul Ghani (2018) Image pre-processing algorithm for Ficus deltoidea Jack (Moraceae) varietal recognition: a repeated perpendicular line scanning approach. International Journal of Engineering & Technology, 7 (2). pp. 49-53. ISSN 2227-524X. (Published)

Ahmad Fakhri, Ab. Nasir and M. Nordin, A. Rahman and Nashriyah, Mat and A. Rasid, Mamat and Ahmad Shahrizan, Abdul Ghani (2017) Ficusdeltoidea (Jack) Moraceae Varietal Identification Using Statistical Recognition Approach. World Applied Sciences Journal. pp. 82-88. ISSN 1818-4952. (Published)

Ahmad Imran, Mohd Thaim and Norazlianie, Sazali and Kadirgama, Kumaran and Ahmad Shahir, Jamaludin and Faiz, Mohd Turan and Norhaida, Ab. Razak (2023) Smart Glove for Sign Language Translation. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 80-87. ISSN 2289-7895. (Published)

Ahmad Noor Syukri, Zainal Abidin and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and Azzuhana, Roslan and Roziana, Shahril and Zulhaidi, Mohd Jawi and Khairil Anwar, Abu Kassim (2021) Potential application of Artificial Neural Network (ANN) analysis method on Malaysian road crash data. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (2). pp. 95-105. ISSN 2636-9575. (Published)

Ahmad Noor Syukri, Zainal Abidin and Azzuhana, Roslan and Roziana, Shahril and Arief Hakimi, Azmi and Ahmad Shahir, Jamaludin and Nur Aini Safiah, Abdullah and Zulhaidi, Mohd Jawi and Khairil Anwar, Abu Kassim (2021) Malaysian road traffic crash data: Where do we stand now. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (2). pp. 88-94. ISSN 2636-9575. (Published)

Ahmad Rosli, Abdul Manaf and Jiwang, Yan (2017) Improvement of Form Accuracy and Surface Integrity of Si-HDPE Hybrid Micro-Lens Arrays in Press Molding. Precision Engineering, 47. pp. 469-479. ISSN 0141-6359. (Published)

Ahmad Rosli, Abdul Manaf and Sugiyama, Tsunetoshi and Yan, Jiwang (2017) Design and Fabrication of Si-HDPE Hybrid Fresnel Lenses for Infrared Imaging Systems. Optics Express, 25 (2). pp. 1202-1220. ISSN 1094-4087. (Published)

Ahmmad Shukrie, Md Yudin and Oumer, A. N. and N. F. M., Roslan and Mohd Azlan, Zulkarnain (2020) Computational and experimental study on pressure drop in a fluidised bed with different air distributor designs. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 8043 -8051. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Aikhuele, Daniel O. and Faiz, Mohd Turan (2018) A conceptual model for the implementation of lean product development. International Journal of Service Science, Management, Engineering, and Technology, 9 (1). pp. 1-9. ISSN 1947-959X. (Unpublished) (Unpublished)

Aikhuele, Daniel O. and Faiz, Mohd Turan (2017) An intuitionistic fuzzy multi-criteria decision-making method based on an exponential-related function. International Journal of Fuzzy System Applications, 6 (4). pp. 33-46. ISSN 2156-177X. (Published)

Aikhuele, Daniel O. and Odofin, S. M. (2017) A generalized triangular intuitionistic fuzzy geometric averaging operator for decision-making in engineering and management. Information (Switzerland), 8 (3). ISSN 2078-2489. (Published)

Aikhuele, Daniel Osezua (2017) Interval-valued intuitionistic fuzzy multi-criteria model for design concept selection. Management Science Letters, 7 (9). pp. 457-466. ISSN 1923-9335 (Print); 1923-9343 (Online). (Published)

Aikhuele, Daniel Osezua (2017) Systematic model for lean product development implementation in an automotive related company. Management Science Letters, 7 (7). ISSN 1923-9335 (Print); 1923-9343 (Online). (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2017) An Exponential-Related Function for Decision-Making In Engineering and Management. Open Engineering, 7 (1). pp. 153-160. ISSN 2081‐9927. (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2017) Extended TOPSIS Model for Solving Multi-Attribute Decision Making Problems in Engineering. Decision Science Letters, 6. pp. 365-376. ISSN 1929-5804 (Print); 1929-5812 (Online). (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) A Hybrid Fuzzy Model for Lean Product Development Performance Measurement. IOP Conference Series: Materials Science and Engineering, 114 (1). 012048. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) An Improved Methodology for Multi-Criteria Evaluations in the Shipping Industry. Brodogradnja/Shipbuilding, 67 (3). pp. 59-72. ISSN 0007-215X (Print); 1845-5859 (Online). (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2017) An Integrated Fuzzy Dephi and Interval-Valued Intuitionistic Fuzzy M-Topsis Model for Design Concept Selection. Pakistan Journal of Statistics and Operation Research, 13 (2). pp. 425-438. ISSN 2220-5810. (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2018) A Modified Exponential Score Function for Troubleshooting an Improved Locally Made Offshore Patrol Boat Engine. Journal of Marine Engineering & Technology, 17 (1). pp. 52-58. ISSN 2046-4177 (Print); 2056-8487 (Online). (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) Proposal for a Conceptual Model for Evaluating Lean Product Development Performance: A Study of LPD Enablers in Manufacturing Companies. IOP Conference Series: Materials Science and Engineering, 114 (1). 012047. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2017) A Subjective and Objective Fuzzy-Based Analytical Hierarchy Process Model for Prioritization of Lean Product Development Practices. Management Science Letters, 7 (6). pp. 297-310. ISSN 1923-9335 (Print); 1923-9343 (Online). (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan and Odofin, S. M. and Ansah, Richard Hannis (2017) Interval-Valued Intuitionistic Fuzzy Topsis-Based Model For Troubleshooting Marine Diesel Engine Auxiliary System. International Journal Maritime Engineering, 159 (Pt. A1). pp. 107-114. ISSN 1479-8751. (Published)

Aikhuele, Daniel Osezua and Souleman, Fathi S. and Amir, Azizi (2014) Application of Fuzzy AHP for Ranking Critical Success Factors for the Successful Implementation of Lean Production Technique. Australian Journal of Basic and Applied Sciences, 8 (18). pp. 399-407. ISSN 1991-8178. (Published)

Ainaa Mardhiah, Sabri and Norfazillah, Talib and Amiril Sahab, Abdul Sani and Kamaruddin, Kamdani (2023) Evaluation of physicochemical and tribological performances of hBN/WS2 and hBN/TiO2 hybrid nanoparticles-MJO-based oil. Jurnal Tribologi, 37. pp. 84-97. ISSN 2289-7232. (Published)

Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2021) Recent Study on Hard to Machine Material – Micromilling process. Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 8 (2). pp. 445-453. ISSN 2432-5953 (Online). (Published)

Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and Akira, Hosokawa and Furumoto, Tatsuaki and Mohd Shahril, Osman (2019) Bold approach in finite element simulation on minimum quantity lubrication effect during machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 33-41. ISSN 2636-9575. (Published)

Aisha, Muhammad and Shanono, I. H. (2020) Finite element analysis of the heat transfer in a piston. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 45-51. ISSN 2636-9575. (Published)

Akm Asif, Iqbal and Norfatihah, Ismail (2022) Mechanical properties and corrosion behavior of silica nanoparticle reinforced magnesium nanocomposite for bio-implant application. Materials, 15 (8164). pp. 1-11. ISSN 1996-1944. (Published)

Al-Hadi, Abdulsalam Khaled Abdullah and Siti Zubaidah, Ismail (2021) Developing palm oil inventory control system using Ms Excel macro. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 51-55. ISSN 2636-9575. (Published)

Alao, Abdur-Rasheed and Azmir, Azhari (2021) Investigation of indentation size effect and R-curve behaviour of Li2O–SiO2 and Li2O–2SiO2 glass ceramics. Journal of the Mechanical Behavior of Biomedical Materials, 124 (104842). pp. 1-13. ISSN 1751-6161. (Published)

Ali, Mohammed A. H. and Alshamer, Mohammed A. (2018) An intelligent adjustable spanner for automated engagement with multi-diameter bolts/nuts during tightening/loosening process using vision system and fuzzy logic. The International Journal of Advanced Manufacturing Technology. pp. 1-19. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Ali, Mohammed A. H. and Au, Kai Lun (2018) A cascading fuzzy logic with image processing algorithm-based defect detection for automatic visual inspection of industrial cylindrical object’s surface. The International Journal of Advanced Manufacturing Technology. pp. 1-14. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Ali, Mohammed A. H. and Mailah, Musa (2018) Path Planning and Control of Mobile Robot in Road Environments using Sensor Fusion and Active Force Control. IEEE Transactions on Vehicular Technology. pp. 1-20. ISSN 0018-9545. (Published)

Ali, Mohammed A. H. and Mailah, Musa (2019) A simulation and experimental study on wheeled mobile robot path control in road roundabout environment. International Journal of Advanced Robotic Systems, 16 (2). pp. 1-17. ISSN 1729-8806. (Published)

Ali, Mohammed A. H. and Musa, Mailah (2018) Laser simulator: a novel search graph-based path planning approach. International Journal of Advanced Robotic Systems, 15 (5). pp. 1-16. ISSN 1729-8806. (Published)

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof (2017) An Intelligent Robust Control of Wheeled Mobile Robot in Restricted Environment. International Journal of Control Systems and Robotics, 2. pp. 6-11. ISSN 2367-8917. (Published)

Ali Ibrahim, Muhammad Naqiuddin and Najib, M. S. and Mohd Daud, Suhaimi (2022) Correlation investigation of odour-profile and temperature intensity. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 48-57. ISSN 2637-0883. (Published)

Alisha, E. and Najwa, N. and Jamaludin, A. S. and Razali, M. N. M. and Saffe, S. N. M. (2022) Analysis on auger pump performance during handling high viscous liquid. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 48-54. ISSN 2636-9575. (Published)

Almanifi, Omair Rashed Abdulwareth and Ahmad Fakhri, Ab. Nasir and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Abdul Majeed, Anwar P. P. (2022) Heartbeat murmurs detection in phonocardiogram recordings via transfer learning. Alexandria Engineering Journal, 61 (12). pp. 10995-11002. ISSN 1110-0168. (Published)

Almanifi, Omair Rashed Abdulwareth and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed (2022) Human activity recognition based on wrist PPG via the ensemble method. ICT Express. pp. 1-5. ISSN 2405-9595. (In Press / Online First) (In Press / Online First)

Almanifi, Omair Rashed Abdulwareth and Ng, Jee Kwan and Anwar P. P., Abdul Majeed (2021) The classification of FTIR plastic bag spectra via label spreading and stacking. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 70-76. ISSN 2637-0883. (Published)

Almuallim, Basel and Wan Sharuzi, Wan Harun and Al Rikabi, Ihab Jabbar and Mohammed, Hussein A. (2022) Thermally conductive polymer nanocomposites for filament-based additive manufacturing. Journal of Materials Science, 57 (6). 3993 -4019. ISSN 0022-2461. (Published)

Alqadami, Abdulrahman Shueai Mohsen and Jamlos, M. F. and Mohd Aminudin, Jamlos (2019) Efficacy of a wideband flexible antenna on a multilayer polymeric nanocomposites Fe3O4-PDMS substrate for wearable applications. Current Applied Physics, 19 (11). pp. 1259-1265. ISSN 1567-1739. (Published)

Amiera Azwa, Abdul Ghafar and Noraini, Mohd Razali (2022) The significant of lean practice on the sustainability performance in automotive manufacturing industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 83-89. ISSN 2636-9575. (Published)

Amilia, Hasbullah and Wan Zahari, Wan Yusoff and Maziah, Ismail and Vitasari, Prima (2011) A framework study of school facilities performance in public primary school of Batubara district in Indonesia. Procedia Social and Behavioral Sciences, 15. pp. 3708-3712. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Amir, Azizi (2014) Integration of Seasonal Autoregressive Integrated Moving Average and Bayesian Methods to Predict Production Throughput Under Random Variables. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1236-1250. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Amir, Azizi and Amir Yazid, Ali and Loh, Wei Ping (2013) An Adaptive Neuro-Fuzzy Inference System for a Dynamic Production Environment under Uncertainties. World Applied Sciences Journal, 25 (3). pp. 428-433. ISSN 1818-4952. (Published)

Amir, Azizi (2014) A Decision Model to Assess Current Methods in Capacity Planning for Semiconductor Industry. Australian Journal of Basic and Applied Sciences, 8 (15 (Sp). pp. 319-325. ISSN 1991-8178. (Published)

Amir, Azizi (2015) Evaluation Improvement of Production Productivity Performance using Statistical Process Control, Overall Equipment Efficiency, and Autonomous Maintenance. Procedia Manufacturing, 2. pp. 186-190. ISSN 2351-9789. (Published)

Amir, Azizi and Aikhuele, Daniel O. and Souleman, Fathi S. (2015) A Fuzzy TOPSIS Model to Rank Automotive Suppliers. Procedia Manufacturing, 2. pp. 159-164. ISSN 2351-9789. (Published)

Amiril Sahab, Abdul Sani and Sousa, Fábio José Pinheiro (2020) The effect of pressure gradient and abrasive tool wear when polishing ceramic tiles. Materials Today: Proceedings, 46 (4). pp. 1770-1777. ISSN 2214-7853. (Published)

Amiril Sahab, Abdul Sani and Zubaidah, Zamri and Radhiyah, Abd Aziz and Ainaa Mardhiah, Sabri and Norfazillah, Talib (2024) Tribological performance of novel modified calophyllum inophyllum nano-fluid from Pahang, Malaysia. Jurnal Tribologi, 40. pp. 1-13. ISSN 2289-7232. (Published)

Anati, N. and Aqida, S. N. and Ismail, Nurazima and Kasim, M. S. (2022) Mechanical characterisation of water-jet shot peened H13 tool steel surface. Journal of Mechanical Engineering and Sciences (JMES), 16 (3). 9122 -9128. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Anwar, M. Shahril and Rasid, Mohd Azri Hizami (2022) Evaluation of direct-quadrature position and saturation of a SynRM machine with segmented rotor. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 1-5. ISSN 2637-0883. (Published)

Anwar, P. P. Abdul Majeed and Abdul Aziz, Jaafar and Sapuan, S. M. and Shahnor, Basri (2014) Velocity Measurements Using High-Speed Imaging System for Impact Test. Advanced Materials Research, 903. pp. 187-193. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Aqilah, Kamaruzaman and Nurul Akmal, Che Lah (2020) Formation of Ag nanowires in the presence of tannic acid. Materials Today: Proceedings, 29 (Part 1). pp. 240-243. ISSN 2214-7853. (Published)

Aqilah, Kamaruzaman and Nurul Akmal, Che Lah (2021) Morphological changes of ZnO nanostructures upon addition of Trisodium Citrate (Na3C6H5O7) at different reaction temperatures. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 18-22. ISSN 2636-9575. (Published)

Aqilah, Kamaruzaman and Nurul Akmal, Che Lah (2021) Morphological changes of ZnO nanostructures upon addition of tannic acid. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 23-26. ISSN 2636-9575. (Published)

Areena, Zaini and Haryantie, Kamil and Mohd Yazid, Abu (2020) A case study on the un-used capacity assessment using time driven activity based costing for magnetic components. International Journal of Industrial Management (IJIM), 6 (1). pp. 18-39. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Arslan, A. and Masjuki, H. H. and Quazi, M. M. and Kalam, Md. Abul and Varman, M. and Jamshaid, M. and Rahman, S. M. Ashrafur and Imran, M. and Zulfattah, Z. M. and Anwar, M. T. and Gohar, G. A. and Mandalan, S. M. and Harith, M. H. (2019) Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads. Materials Research Express, 6 (10). pp. 1-2. ISSN 2053-1591. (Published)

Arvind, Kottasamy and Mahendran, Samykano and Kumaran, Kadirgama and Rahma, Mustafizur and Muhamad, Mat Noor (2021) Experimental investigation and prediction model for mechanical properties of copper-reinforced polylactic acid composites (Cu-PLA) using FDM-based 3D printing technique. Journal of Advanced Manufacturing Technology, 119. pp. 5211-5232. ISSN 2289-8107. (Published)

Asnul Hadi, Ahmad and Naher, Sumsun and Brabazon, Dermot (2014) The Effect of Direct Thermal Method, Temperature and Time on Microstructure of a Cast Aluminium Alloy. Materials and Manufacturing Processes, 29 (2). pp. 134-139. ISSN 1532-2475. (Published)

Asyraf, Abdullah and Siti Rabiatull Aisha, Idris (2023) A review: effect of copper percentage solder alloy after laser soldering. Soldering & Surface Mount Technology, ahead-of-print (ahead-of-print). pp. 1-29. ISSN 0954-0911. (Published)

Awanis, Romli and Prickett, Paul and Setchi, Rossitza and Soe, Shwe (2015) Integrated Eco-design Decision-making for Sustainable Product Development. International Journal of Production Research, 53 (2). pp. 1-24. ISSN 0020-7543 (Print), 1366-588X (Online). (Published)

Awanis, Romli and Setchi, Rossitza and Prickett, Paul and De la Pisa, Miguel (2016) Eco-Design Case-Based Reasoning Tool: The Integration of Ecological Quality Function Deployment and Case-Based Reasoning Methods for Supporting Sustainable Product Design. Proc IMechE Part B: Journal Engineering Manufacture. pp. 1-20. ISSN 0954-4054 (Print); 2041-2975 (Online). (Published)

Ayda, Emdadian and Ponnambalam, S. G. and Kanagaraj, G. (2018) An implementation of differential evolution algorithm for a single product and single period multi-echelon supply chain network model. Journal of Modern Manufacturing Systems and Technology, 1. pp. 1-14. ISSN 2636-9575. (Published)

Azeddien, Kinsheel and Zahari, Taha and Abdelhakim, Deboucha and Tuan Mohammad Yusoff, Tuan Ya (2012) Robust Least Square Estimation Of The CRS A465 Robot Arm's Dynamic Model Parameters. Journal of Mechanical Engineering Research, 4 (3). pp. 89-99. ISSN 2141-2383. (Published)

Azizul Qayyum, Basri and N. M. Zuki, N. M. and Nelfiyanti, Nelfiyanti and Yusrizal, Yusoof (2021) SMED Simulation in Optimising the Operating Output of Tandem Press Line in the Automotive Industry using WITNESS Software. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 8895-8906. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Azmir, Azhari and Schindler, Christian and Hilbert, K. and Godardb, C. and Kerscher, Eberhard (2014) Influence of Waterjet Peening and Smoothing on the Material Surface and Properties of Stainless Steel 304. Surface and Coatings Technology, 258 (Nov.). pp. 1176-1182. ISSN 0257-8972. (Published)

Azmir, Azhari and Schindler, Christian and Nkoumbou, Jhislain and Kerscher, Eberhard (2014) Surface Erosion of Carbon Steel 1045 During Waterjet Peening. Journal of Materials Engineering and Performance, 23 (5). pp. 1870-1880. ISSN 1059-9495. (Published)

Aznilnda, Zainodin and Aida Khairunisa, Ab. Kadir and M. Nasir, Ayob and Ahmad Fariz, Hasan and Amar Faiz, Zainal Abidin and Fazlinashatul Suhaidah, Zahid and Hazriq Izuan, Jafar and Ismail, Mohd Khairuddin (2014) An Experimental Study Of Combinational Logic Circuit Minimization Using Firefly Algorithm. Coloquium on Robotics, Unmaned Systems And Cybernetics 2014 (CRUSC 2014). pp. 17-21. (Published)

B., Norhafzan and S. N., Aqida and E., Chikarakara and D., Brabazon (2016) Surface Modification of AISI H13 Tool Steel by Laser Cladding with NiTi Powder. Applied Physics A. pp. 2-6. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

Bagaber, Salem Abdullah and A. R., Yusoff (2018) Energy and Cost Integration for Multi-Objective Optimisation in a Sustainable Turning Process. Measurement. pp. 1-35. ISSN 0263-2241. (In Press / Online First) (In Press / Online First)

Bagaber, Salem Abdullah and A. R., Yusoff (2018) Sustainable optimization of dry turning of stainless steel based on energy consumption and machining cost. Procedia CIRP, 77. pp. 397-400. ISSN 2212-8271. (Published)

Bagaber, Salem Abdullah and Abdullahi, Tijjani and Zawati, Harun and Daib, Nateq and Mohd Hafiz Dzarfan, Othman (2017) The Effect of Lanthanum Addition on the Microstructure and Mechanical Properties of A390 Aluminium Alloy. Arabian Journal for Science and Engineering, 42 (11). pp. 4559-4564. ISSN 1319-8025 (print); 2191-4281 (online). (Published)

Baharuddin, N. J. and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin (2022) Study on die shoulder patterning method (DSPM) to minimise springback of U-bending. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9509-9518. ISSN 2180-1606. (Published)

Bathrinath, S. and Charan, Vadakapur Sai and Ponnambalam, S. G. and Saravanasankar, S. (2019) Identification and evaluation of criteria of agile manufacturing using dematel: a case from an indian metal fabrication industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 61-74. ISSN 2636-9575. (Published)

Beg, M. D. H. and Zaman, Haydar U. (2016) Banana Fiber Strands–Reinforced Polymer Matrix Composites. Composite Interfaces, 23 (4). pp. 281-295. ISSN 0927-6440 (print); 1568-5543 (online). (Published)

Bhalaji, R. K. A. and Bathrinath, S. and Ponnambalam, S. G. and Saravanasankar, S. (2019) A Fuzzy Decision-Making Trial and Evaluation Laboratory approach to analyse risk factors related to environmental health and safety aspects in the healthcare industry. Sadhana, 44 (55). pp. 1-15. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Bhalaji, R. K. A. and Bathrinath, S. and Ponnambalam, S. G. and Saravanasankar, S. (2020) A soft computing methodology to analyze sustainable risks in surgical cotton manufacturing companies. Sadhana, 45 (1). pp. 1-22. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Bhalaji, R. K. A. and Bathrinath, S. and Ponnambalam, S. G. and Saravanasankar, S. (2020) A soft computing methodology to analyze sustainable risks in surgical cotton manufacturing companies. Sadhana, 45 (1). pp. 1-2. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Chak, Wen Zheng and Abu, Mohd Yazid (2019) Application of Activity Based Costing for Palm Oil Plantation. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 1-14. ISSN 2636-9575. (Published)

Chia, Yun Qi and Mohd Nizar, Mhd Razali and Ahmad Shahir, Jamaludin and Ahmad Redza, Ahmad Mokhtar and Saiful Bahari, Hamzah and Mohd Shahril, Osman (2019) Surface texturing potential on carbide insert in reducing aluminium alloy adhesiveness during machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 42-50. ISSN 2636-9575. (Published)

Chowdhury, M. A. and Debnath, U. K. and Kamruzzaman, M. and Nuruzzaman, D. M. and Mia, Md. Shahin (2019) Analysis and optimization of turned surfaces of AISI 1060 using ANOVA and regression. Tribology in Industry, 41 (1). pp. 23-32. ISSN 0354-8996. (Published)

Chowdhury, M. A. and Nuruzzaman, D. M. and Kumar Roy, Biplov and M. M., Rahman and Md. Shahin, Mia and Md. Rashed, Mia and Shazib, Bhumik (2013) Experimental Investigation of Friction Coefficient and Wear Rate of Different Sliding Pairs. World Applied Sciences Journal, 28 (5). pp. 608-619. ISSN 1818-4952. (Published)

Chowdhury, M. A. and Nuruzzaman, D. M. and Roy, Biplov Kumar (2013) Experimental Investigation of Friction Coefficient and Wear Rate of Stainless Steel 304 Sliding against Smooth and Rough Mild Steel Counterfaces. Gazi University Journal of Science, 26 (4). pp. 597-609. (Published)

Chowdhury, Mohammad Asaduzzaman and Nuruzzaman, D. M. and Roy, Biplov Kumar and Rahman, Muhammad Mahmudur and Azad, Md. Abul Kalam and Rahman, Md.Mijanur and Bhumik, Shazib (2013) Friction Coefficient and Wear Rate of Copper Mating with Smooth and Rough Stainless Steel 304 Counterfaces. Journal of American Science, 9 (5). pp. 361-368. ISSN 1545-1003 (Print); 2375-7264 (Online). (Published)

Chua, Wei Ming and Khairul Fikri, Muhammad (2021) Development of walking robot using compliance mechanism. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 49-56. ISSN 2637-0883. (Published)

Cionita, Tezara and Siregar, Januar Parlaungan and Wong, Ling Shing and Cheng, Wan Hee and Fitriyana, Deni Fajar and Jamiluddin, Jaafar and Ramli, Junid and Irawan, Agustinus Purna and Hadi, Agung Efriyo (2022) The influence of filler loading and alkaline treatment on the mechanical properties of palm kernel cake filler reinforced epoxy composites. Polymers, 14 (3063). pp. 1-17. ISSN 2073-4360. (Published)

Cuce, Erdem and Cuce, Pinar Mert and Carlucci, Salvatore and Sen, Harun and Sudhakar, Kumarasamy and Md., Hasanuzzaman and Daneshazarian, Reza (2022) Solar chimney power plants : A review of the concepts, designs and performances. Sustainability (Switzerland), 14 (3). pp. 1-66. ISSN 2071-1050. (Published)

Danial Haziq, Rizal and Wan Hasbullah, Mohd Isa and Muhammad Amirul, Abdullah and Abdul Majeed, Anwar P. P. and Norasmiza, Mohd (2023) Effects of varied planar dimensions of IPMC on simulated actuation using COMSOL. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (2). pp. 1-5. ISSN 2637-0883. (Published)

Darestani, S. Avakh and M. Y., Ismail and N., Ismail and R. M., Yusuff (2011) A material and product audit method for determining the level of quality. Advanced Materials Research, 264-265. pp. 1714-1718. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Darshana, Kumari Raguphaty and Shamsuddin, Baharin and Faiz, Mohd Turan (2020) University industry collaboration: The role of public universities within the Malaysian manufacturing landscape. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 36-44. ISSN 2636-9575. (Published)

Dawood Gani, Anisha Banu and Fernando, Yudi (2021) The cybersecurity governance in changing the security psychology and security posture: insights into e-procurement. International Journal of Procurement Management, 14 (3). pp. 308-327. ISSN 1753-8440. (Published)

Djojodihardjo, H. and M. F., Abdul Hamid and Abdul Aziz, Jaafar and Shah Nor, Basri and F. I., Romli and F., Mustapha and A. S., Mohd Rafie and D. L. A., Abdul Majid (2013) Computational Study on the Aerodynamic Performance of Wind Turbine Airfoil Fitted with Coanda Jet. Journal of Renewable Energy, 2013. pp. 1-17. (Published)

Doolun, Ian Shivraj and Ponnambalam, S. G. and Subramanian, Nachiappan and Kanagaraj, G. (2018) Data driven hybrid evolutionary analytical approach for multi objective location allocation decisions: Automotive green supply chain empirical evidence. Computers and Operations Research, 98. pp. 265-283. ISSN 0305-0548. (Published)

Ebrahim, Nader Ale and Shamsuddin, Ahmed and Salwa Hanim, Abdul-Rashid and Zahari, Taha (2012) Effective Virtual Teams for New Product Development. Scientific Research and Essay , 7 (21). pp. 1971-1985. ISSN 1992-2248. (Published)

Ee, Ken-ji and Ahmad Fakhri, Ab. Nasir and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman and Nur Hafieza, Ismail (2021) The animal classification: An evaluation of different transfer learning pipeline. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 27-31. ISSN 2637-0883. (Published)

Erdiwansyah, . and Mahidin, . and Ahmad Fitri, Yusop and Muhammad Zaki, . and R., Mamat and Muhibbuddin, . and Ratna Eko, Sardjono and Nor Azwadi, Che Sidik and Husni, Husin (2021) Investigation of the effect biodiesel-butanol-water fuel blend pressure on a single-cylinder diesel engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). 39 -47. ISSN 2289-7879. (Published)

Eswaramoorthi, Vijayamurugan and Kuan, Garry and Mohamad Razali, Abdullah and Anwar, P. P. Abdul Majeed and Suppiah, Pathmanathan K. and Musa, Rabiu Muazu (2022) Design and validation of a virtual physical education and sport science–related course: A learner’s engagement approach. International Journal of Environmental Research and Public Health, 19 (13). pp. 1-16. ISSN 1661-7827. (Published)

Eswaramoorthi, Vijayamurugan and Muhammad Zulhusni, Suhaimi and Mohamad Razali, Abdullah and Zulkefli, Sanip and Anwar, P. P. Abdul Majeed and Muhammad Zuhaili, Suhaimi and Clark, Cain C. T. and Musa, Rabiu Muazu (2022) Association of physical activity with anthropometrics variables and health-related risks in healthy male smokers. International Journal of Environmental Research and Public Health, 19 (12). pp. 1-15. ISSN 1661-7827. (Published)

F. R. M., Romlay and Wan Azhar, Wan Yusoff and Kamal Arifin, Mat Piah (2016) Increasing the Efficiency of Traveling Wave Ultrasonic Motor by Modifying the Stator Geometry. Ultrasonics Sonochemistry, 64. pp. 177-185. ISSN 1350-4177. (Published)

Faiz, Mohd Turan and Badrul, Omar (2014) Design Evaluation Framework for Design Engineers using Improved Rough-Grey Analysis - A Case Study. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 366-373. ISSN 1991-8178. (Published)

Faiz, Mohd Turan (2016) Incorporating Customer Requirements in Assessing Criteria Based On Triz - A Case Study. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7558-7564. ISSN 1819-6608. (Published)

Faiz, Mohd Turan and Aikhuele, Daniel Osezua (2017) Need for Reliability Assessment of Parent Product before Redesigning a New Product. Current Science, 112 (1). pp. 10-11. ISSN 0011‐3891. (Published)

Faiz, Mohd Turan and Badrul, Omar (2014) Design Evaluation Method for Design Engineer in Manufacturing Industries using Integrated Rough-Grey Analysis Approach. Applied Mechanics and Materials, 660. pp. 1052-1056. ISSN 1662-7482. (Published)

Faiz, Mohd Turan and Badrul, Omar (2014) A Three-stage Methodology for Design Evaluation in Product Development. International Journal of Computers & Technology, 12 (6). pp. 3602-3625. ISSN 2277-3061. (Published)

Faiz, Mohd Turan and Kartina, Johan (2016) Assessing Sustainability Framework Of Automotive-Related Industry in the Malaysia Context Based on GPM P5 Standard. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7606-7611. ISSN 1819-6608. (Published)

Faiz, Mohd Turan and Kartina, Johan and Nik Hisyamudin, Muhd Nor and Badrul, Omar (2017) Sustainability Assessment Model in Product Development. IOP Conference Series: Materials Science and Engineering, 226. pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Farah Nur Arina, Baharudin and Nor Azlina, Ab. Aziz and Mohamad Razwan, Abdul Malek and Anith Khairunnisa, Ghazali and Zuwairie, Ibrahim (2022) Indoor comfort and energy consumption optimization using an inertia weight artificial bee colony algorithm. Algorithms, 15 (395). pp. 1-21. ISSN 1999-4893. (Published)

Farhan Nabil, Mohd Noor and Wan Hasbullah, Mohd Isa and Anwar P. P., Abdul Majeed (2020) The diagnosis of diabetic retinopathy by means of transfer learning with conventional machine learning pipeline. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 62-67. ISSN 2637-0883. (Published)

Farzad, Tahriri and Zahari, Taha (2010) The Concept of Integrating Virtual Group (VG) and Agile Supplier Selection (ASS). Journal of Business Management and Economics, 1 (1). pp. 32-37. (Published)

Fatchurrohman, Nanang and Suraya, Sulaiman and S. M., Sapuan and M. K. A., Ariffin and B. T. H. T., Baharuddin (2015) Analysis of a Metal Matrix Composites Automotive Component. International Journal of Automotive and Mechanical Engineering (IJAME), 11 (June). pp. 2531-2540. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Fatemeh, D. B. and Loo, C. K. and Kanagaraj, G. and Ponnambalam, S. G. (2018) A hybrid SP-QPSO algorithm with parameter free adaptive penalty method for constrained global optimization problems. Journal of Modern Manufacturing Systems and Technology, 1. pp. 15-26. ISSN 2636-9575. (Published)

Fatimah, Mahmud and Puteri Fadzline, Muhamad Tamyez and Mohamad Farizuan, Mohd Nor (2019) Determinants in developing a learning factory in higher educational institution. International Journal of Recent Technology and Engineering, 8 (2S7). pp. 189-192. ISSN 2277-3878. (Published)

Fatin Munirah, Nasarudin and Muhammad Sharfi, Najib and Suhaimi, Mohd Daud and Mujahid, Mohamad and Saiful Nizam, Tajuddin and Che Mohd Aizal, Che Mohd (2020) Intelligent clasification sewage treatment plant (STP) using E-nose. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 79-88. ISSN 2637-0883. (Published)

Fatkhurrahman, Manani and Siti Zubaidah, Ismail (2021) Enhancing palm oil inventory control support analytic tools. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 46-50. ISSN 2636-9575. (Published)

Fazilah, Abdul Aziz and Nur Aisyah Mardhiah, Halim (2022) Consequences of risk factors related to prolonged computer use on musculaokeletal pain in public unversity students: A case study. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 69-75. ISSN 2636-9575. (Published)

Fazilah, Abdul Aziz and Nur Najmiah, Jaafar and Suraya, Sulaiman (2014) Critical Success Factors of New Product Development and Impact on Performance of Malaysian Automotive Industry. Advanced Materials Research, 903. pp. 431-437. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. (2019) Occupational ergonomics risk factors prioritization using integrated analytical hierarchy process (AHP) approach: a study of a local automotive component manufacturer. Human Factors & Ergonomics Journal (HFEJ), 4 (2). pp. 1-14. ISSN 2590-3705. (Published)

Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. and Amri, Isfar (2017) Assessing exposure to physical risk factors for work-related musculoskeletal disorders and relevant psychosocial factors among assembly workers in an automotive component assembly plant. Human Factors & Ergonomics Journal (HFEJ), 2 (1). pp. 34-51. ISSN 2590-3705. (Published)

Fazliana, Fauzun and S. N., Aqida and I., Ismail and Norhafzan, Bariman (2017) Micro-Bulges Investigation on Laser Modified Tool Steel Surface. MATEC Web of Conferences, 95. pp. 1-4. ISSN 2261-236X. (Published)

Fazliana, Fauzun and S. N., Aqida and Izwan, Ismail (2019) Design of laser melting of tool steel for surface integrity enhancement. Jurnal Tribologi, 22. pp. 18-31. ISSN 2289-7232. (Published)

Fernando, Yudi and Muhammad Shabir, Shaharudin and Ahmed Zainul, Abideen (2022) Circular economy-based reverse logistics: dynamic interplay between sustainable resource commitment and financial performance. European Journal of Management and Business Economics, 1 (1). pp. 1-22. ISSN 2444-8494. (Published)

Fernando, Yudi and Nor Hazwani, Mohd Rozuar and Mergeresa, Fineke (2021) The blockchain-enabled technology and carbon performance: Insights from early adopters. Technology in Society, 64 (1). p. 101507. ISSN 0160-791X. (Published)

Fernando, Yudi and Tseng, Min-Lang and Aziz, Nurarif and Ikhsan, Ridho Bramulya and Wahyuni-TD, Ika Sari (2022) Waste-to-energy supply chain management on circular economy capability: An empirical study. Sustainable Production and Consumption, 31. pp. 26-38. ISSN 2352-5509. (Published)

Fernando, Yudi and Tseng, Ming-Lang and Nur, Gulam Muhammad and Ikhsan, Ridho Bramulya and Lim, Ming K. (2022) Practising circular economy performance in Malaysia: Managing supply chain disruption and technological innovation capability under industry 4.0. International Journal of Logistics Research and Applications, 1 (1). pp. 1-25. ISSN 1367-5567. (Published)

Fernando, Yudi and Wahyuni-TD, Ika Sari and Abideen, Ahmed Zainul and Mergeresa, Fineke (2022) Traceability technology, halal logistics brand and logistics performance: Religious beliefs and beyond. Journal of Islamic Marketing, 1 (1). pp. 1-25. ISSN 1759-0833. (Published)

Filzah Lina, Mohd Safeiee and Siti Khadijah, M. Saad and Mohd Yazid, Abu (2020) A case study on the application of activity-based costing on the inductor component. Jurnal Teknik Industri, 10 (3). pp. 248-254. ISSN 2622-5131 (Online). (Published)

Firdaus Shazriq, Mohd Fadzil and Nur Izzati Khoirunnisa, Ismail and Nurrina, Rosli (2018) Study on the effects of nozzle distance to surface roughness of workpiece under minimum quantity lubricant (MQL) milling process. Journal of Modern Manufacturing Systems and Technology, 1. pp. 76-81. ISSN 2636-9575. (Published)

Fukuoka, Yasuhiro and Komatsu, Ryunosuke and Machii, Kenta and Yokota, Masaaki and Tobe, Masaki and Ahmad Najmuddin, Ibrahim and Fukui, Takahiro and Habu, Yasushi (2022) Pace running of a quadruped robot driven by pneumatic muscle actuators : An experimental study. Applied Sciences (Switzerland), 12 (9). pp. 1-17. ISSN 2076-3417. (Published)

Ganapathy, Veanuga and Kurniawan, Tedi and Mas Ayu, Hassan and Asmara, Y. P. and R., Daud and Prastomo, Niki and Dani Nandiyanto, Asep Bayu (2018) Aluminum alloy AA2024 coated with ZrO2 using a sol-gel-assisted dip-coating technique and its corrosion performance. Journal of Engineering Science and Technology, 13 (6). pp. 1713-1721. ISSN 1823-4690. (Published)

Gani, Anisha Banu Dawood and Fernando, Yudi (2022) Digital empathy and supply chain cybersecurity challenges: concept, framework and solutions for small-medium enterprises. International Journal of Management Concepts and Philosophy. pp. 1-10. ISSN 1741-8135. (In Press / Online First) (In Press / Online First)

Gesang, Nugroho and Zahari, Taha and Tedy, Setya Nugraha and Hatyo, Hadsanggeni (2015) Development of a Fixed Wing Unmanned Aerial Vehicle (UAV) for Disaster Area Monitoring and Mapping. Journal of Mechatronics, Electrical Power, and Vehicular Technology, 6 (2). pp. 83-88. ISSN 2087-3379. (Published)

Ghaderi, Hadi and Avakh Darestani, Soroush and Zulkiffle, Leman and Mohd Yusof, Ismail (2012) Horizontal collaboration in logistics: A feasible task for group purchasing. International Journal of Procurement Management, 5 (1). pp. 43-54. ISSN 1753-8440. (Published)

Gopi, Ajith and Sudhakar, K. and Ngui, Wai Keng and Krishnan, Ananthu R. and Priya, S. Shanmuga (2021) Performance modeling of the weather impact on a utility-scale PV power plant in a tropical region. International Journal of Photoenergy, 2021 (5551014). pp. 1-10. ISSN 1687-529X (Online). (Published)

Guna Rao, Kishyen Raao and Nur Qurratul Ain, Adanan and Anis Izzati, Md Yusoff and Faiz, Mohd Turan and Norazlianie, Sazali (2024) Optimisation of Injection Moulding Process Parameters. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 182-198. ISSN 2289-7895. (Published)

Gupta, Ritu and Noraziah, Ahmad and Gupta, Arun and Ainul Azila, Che Fauzi (2017) Challenges in predicting wood plastic composites (WPCs). Advanced Science Letters, 23 (11). pp. 11035-11039. ISSN 1936-6612. (Published)

Hadi, Agung Efriyo and Mohamad Hamdan, Mohammad Hazim and Siregar, J. P. and Ramli, Junid and Tezara, Cionita and Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Rihayat, Teuku (2021) Application of micromechanical modelling for the evaluation of elastic moduli of hybrid woven jute–ramie reinforced unsaturated polyester composites. Polymers, 13 (15). pp. 1-11. ISSN 2073-4360. (Published)

Hadi, Agung Efriyo and Siregar, Januar Parlaungan and Cionita, Tezara and Norlaila, Mohd Bakeri and Muhammad Amin, Mohd Badari and Irawan, Agustinus Purna and Jamiluddin, Jaafar and Rihayat, Teuku and Ramli, Junid and Fitriyana, Deni Fajar (2022) Potentiality of utilizing woven pineapple leaf fibre for polymer composites. Polymers, 14 (13). pp. 1-11. ISSN 2073-4360. (Published)

Haizad, Hassim and Ahmad Rosli, Abdul Manaf (2022) Investigation of optimum milling parameters in micro dimples machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (1). 73- 81. ISSN 2636-9575. (Published)

Hartini, Mustafa and A. R., Yusoff and M. Yusoff, Ismail (2012) Productivity study and line balancing of GGMG & CALICO production line. Advanced Materials Research, 576. pp. 700-704. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Hasimah, Sapiri and Razman, Mat Tahar (2014) System Dynamics Approach As A Risk Management Tool In Analyzing Pension Expenditure: The Case Of Malaysian Employees Public Pension Plan. The Singapore Economic Review, 59 (5). ISSN 0217-5908. (Published)

Hassan Abdulrssoul, Abdulhadi and S. N., Aqida and M., Ishak and I., Ismail and Ghusoon, Ridha Mohammed (2017) Experimental Investigation of Thermal Fatigue Die Casting Dies by Using Response Surface Modelling. Metals, 7 (6). pp. 1-13. ISSN 2075-4701. (Published)

Hassan Murshid, Zsa Zsa Nura’in and Ismail, Siti Zubaidah (2022) Investigating efficiency of materials management at original equipment manufacturer (OEM). Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 18-25. ISSN 2636-9575. (Published)

Hegde, Gurumurthy and Garudachari, B. and Isloor, Arun M. and Satyanarayana, M. N. and Fun, Hoong-Kun (2014) Click Chemistry Approach: Regioselective One-pot Synthesis of Some New 8-Trifluoromethylquinoline Based 1,2,3-Triazoles as Potent Antimicrobial Agents. European Journal of Medicinal Chemistry, 74. pp. 324-332. ISSN 0223-5234. (Published)

Hilmi, Amiruddin and Wan Mohd Faizal, Wan Mahmood and Shahrir, Abdullah and Mohd Radzi, Abu Mansor and R., Mamat and Azri, Alias (2018) Investigation of the pressure ratio and efficiency of a turbocharger centrifugal compressor with a vaned diffuser. World Review of Science, Technology and Sustainable Development, 14 (2-3). pp. 228-240. ISSN 1741-2242. (Published)

Hoseini, S. S. and Najafi, G. and Ghobadian, B. and Ebadi, M. T. and R., Mamat and Yusaf, T. (2020) Biodiesels from three feedstock : the effect of graphene oxide (GO) nanoparticles diesel engine parameters fuelled with biodiesel. Renewable Energy, 145. pp. 190-201. ISSN 0960-1481. (Published)

Hossain, Toufiq Md and Jamlos, M. F. and Mohd Aminudin, Jamlos and Soh, Ping Jack and Siti Zuraidah, Ibrahim and Muammar, Mohamad Isa and Schreurs, Dominique M. M.-P. and Narbudowicz, Adam and Mohd Fairusham, Ghazali (2019) Compact broadband triple-ring five-port reflectometer for microwave brain imaging applications. IEEE Access, 7. pp. 29597-29609. ISSN 2169-3536. (Published)

How, Chun Kit and Mohd Khairuddin, Ismail and Mohd Razman, Mohd Azraai and Anwar, P. P. Abdul Majeed and Mohd Isa, Wan Hasbullah (2022) Development of audio-visual speech recognition using deep-learning technique. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 88-95. ISSN 2637-0883. (Published)

Hussin, N.F.R. and Rosli, N. (2022) Study of underfill flow in microchip packaging using ansys. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 76-82. ISSN 2636-9575. (Published)

I. I., Azmi and S. N. A. M., Zaini and Mohd Yazid, Abu (2019) Application of Mahalanobis-Taguchi system in palm oil plantation. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 1-8. ISSN 2636-9575. (Published)

I. M., Sollehudin and Mohamad Heerwan, Peeie (2020) Speed estimation of the electric-powered wheelchair by proposing the state observer method based on experimental data. SN Applied Sciences, 2 (2). pp. 1-8. ISSN 2523-3963 (Print); 2523-3971 (Online). (Published)

I. M., Yusri and Anwar, P. P. Abdul Majeed and R., Mamat and M. F., Ghazali and Awad, Omar I. and Azmi, W. H. (2018) A review on the application of response surface method and artificial neural network in engine performance and exhaust emissions characteristics in alternative fuel. Renewable and Sustainable Energy Reviews, 90. pp. 665-686. ISSN 1364-0321. (Published)

I. M., Zulhilmi and Mohamad Heerwan, Peeie and S. M., Asyraf and I. M., Sollehudin and I. M., Ishak (2020) Experimental Study on the Effect of Emergency Braking without Anti-Lock Braking System to Vehicle Dynamics Behaviour. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). pp. 7832-7841. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ibrahim, Thamir K. and M. M., Rahman (2016) Effects Of Cycle Peak Temperature Ratio On The Performance Of Combined Cycle Power Plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3389-3400. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ibrahim, Thamir K. and M. M., Rahman and F., Basrawi (2016) Statistical analysis and optimum performance of the gas turbine power plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3215-3225. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Iqbal, A. R. and Muhammad, Khairul Fikri (2022) Analysis and design of control system for desktop size concrete 3D printer. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 80-87. ISSN 2637-0883. (Published)

Iqbal, AKM Asif and Arai, Yoshio (2016) Analysis of Fatigue Crack Propagation Behaviour in SiC Particulate Al2O3 Whisker Reinforced Hybrid MMC. IOP Conference Series: Materials Science and Engineering, 114 (012115). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Iqbal, AKM Asif and Arai, Yoshio (2019) Micromechanical investigation of the fatigue crack propagation and damage development in Al/Al2O3/SiC hybrid metal matrix composite. Russian Journal of Non-Ferrous Metals, 60 (5). pp. 566-574. ISSN 1067-8212. (Published)

Iqbal, AKM Asif and Arai, Yoshio (2015) Study On Low-Cycle Fatigue Behavior Of Cast Hybrid Metal Matrix Composites. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2504-2514. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Iqbal, AKM Asif and Chen, Songchun and Arai, Yoshio and Araki, Wakako (2015) Study on Stress Evolution in SiC Particles During Crack Propagation in Cast Hybrid Metal Matrix. Engineering Failure Analysis, 52. pp. 109-115. ISSN 1350-6307. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Cionita, Tezara and Siregar, Januar Parlaungan and Laksmidewi, Dwinita and Baskara, Gregorius Dimas and Mohd Zulkifly, Abdullah and Ramli, Junid and Hadi, Agung Efriyo and Mohammad Hazim, Mohamad Hamdan and Najid, Najid (2022) Overview of the important factors influencing the performance of eco-friendly brake pads. Polymers, 14 (1180). pp. 1-22. ISSN 2073-4360. (Published)

Iskandar, Hasanuddin and Zahari, Taha and Nukman, Y. and Norhafizan, Ahmad and Raja Ariffin, Raja Ghazilla and Tuan Mohammad Yusoff Shah, Tuan Ya (2015) Investigation of the Head Impact Power of a Sepak Takraw Ball on Sepak Takraw Players. Movement, Health & Exercise (MoHE), 4 (2). pp. 45-56. ISSN 2231-9409. (Published)

Ismail, Mohd Khairuddin and Amira Sarayati, Ahmad Dahalan and Amar Faiz, Zainal Abidin and Yee, Yang Lai and Nur Anis, Nordin and Siti Fatimah, Sulaiman and Hazriq Izzuan, Jaafar and Syahrul Hisham, Mohamad and Noor Hafizah, Amer (2014) Modeling and Simulation of Swarm Intelligence Algorithms for Parameters Tuning of PID Controller in Industrial Couple Tank System. Advanced Materials Research, 903. pp. 321-326. ISSN 1662-8985. (Published)

Ismail, Mohd Khairuddin and Siti Fatimah, Sulaiman and Khairuddin, Osman and Mohd Fu'ad, Rahmat and Amar Faiz, Zainal Abidin (2014) Tracking Performances of A Hot Air Blower System Using Different Types Of Controllers. Journal of Theoretical and Applied Information Technology, 69 (2). pp. 385-393. ISSN 1992-8645 (print); 817-3195 (online). (Published)

Ismail, Ibrahim and Hamzah, Ahmad and Zuwairie, Ibrahim and Mohd Falfazli, Mat Jusof and Zulkifli, Md. Yusof and Sophan Wahyudi, Nawawi and Kamal, Khalil and Muhammad Arif, Abdul Rahim (2014) Multi-State Particle Swarm Optimization for Discrete Combinatorial Optimization Problem. International Journal of Simulation: Systems, Science & Technology (IJSSST), 15 (1). pp. 15-25. ISSN 1473-8031 (print); 1473-804x (online). (Published)

Ismail, Mohd Khairuddin and Anwar, P. P. A. Majeed and Abdul Aziz, Jaafar and Jessnor Arif, Mat Jizat (2014) Modeling and PID Control of a Quadrotor Aerial Robot. Advanced Materials Research, 903. pp. 327-331. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Ismail, Mohd Khairuddin and Anwar, P. P. Abdul Majeed and Ann, Lim and Mohd Azraai, M. Razman and Abdul Aziz, Jaafar (2014) Altitude and Attitude Control of a Trirotor UAV. Advanced Materials Research, 903. pp. 309-314. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Ismail, Mohd Khairuddin and Zahari, Taha and Anwar, P. P. Abdul Majeed and Abdel Hakeem, Deboucha and Mohd Azraai, M. Razman and Abdul Aziz, Jaafar and Zulkifli, Mohamed (2016) A Hybrid Joint Based Controller for an Upper Extremity Exoskeleton. Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-899X. (Published)

Izzeldin, I. Mohd and Oudah, Ali A. and A., Hameed (2014) Modern Control Techniques in Wind Turbine. International Journal of Hybrid Information Technology, 7 (4). pp. 101-122. ISSN 1738-9968. (Published)

Jabbar, Waheb A. and Mei Ting, Tan and Mohd Fikri Ikmal, Hamidun and Ajwad Hariz, Che Kamarudin and Wu, Wenyan and Sultan, Jamil and Alsewari, Abdulrahman A. and Mohammad A.H., Ali (2024) Development of LoRaWAN-based IoT system for water quality monitoring in rural areas. Expert Systems with Applications, 242 (122862). pp. 1-18. ISSN 0957-4174. (Published)

Jahan, Ali and M. Yusof, Ismail and S., Shuib and Dayangku Noorfazidah, Awang Sh'ri and Edwards, K. L. (2011) An aggregation technique for optimal decision-making in materials selection. Materials & Design, 32 (10). pp. 4918-4924. ISSN 0264-1275. (Published)

Jamiluddin, Jaafar and Siregar, J. P. and Tezara, C. and Mohammad Hazim, Mohamad Hamdan and Teuku, Rihayat (2019) A review of important considerations in the compression molding process of short natural fiber composites. The International Journal of Advanced Manufacturing Technology, 105 (7-8). pp. 3437-3450. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Jasri, Mohamad and Mohd Zaidi, Sidek (2019) Springback prediction using finite element simulation incorporated with hardening data acquired from cyclic loading tool. International Journal of Materials Forming and Machining Processes (IJMFMP), 6 (1). pp. 19-39. ISSN 2334-4571. (Published)

Jessnor Arif, Mat Jizat and Anwar, P. P. Abdul Majeed and Ahmad Fakhri, Ab. Nasir and Zahari, Taha and Yuen, Edmund (2021) Evaluation of the machine learning classifier in wafer defects classification. ICT Express. pp. 1-5. ISSN 2405-9595. (In Press / Online First) (In Press / Online First)

Johari, N. A. and F. R. M., Romlay and W. S., Wan Harun (2019) SS 316L/HA composite via powder injection moulding: Mechanical and physical properties. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5480 -5492. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Jothi Letchumy, Mahendra Kumar and Rashid, Mamunur and Rabiu Muazu, Musa and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2021) The classification of EEG-based winking signals: a transfer learning and random forest pipeline. PeerJ, 9 (e11182). pp. 1-16. ISSN 2167-8359. (Unpublished) (Unpublished)

Junaidah, Zakaria and Che Rosmani, Che Hassan and Mahar Diana, Hamid and Ezrin Hani, Sukadarin (2019) Safety climate factors at selected chemical manufacturing plant in Malaysia. Process Safety Progress (e12096). ISSN 1547-5913. (Published)

Junita, Mohd Said and Faiz, Mohd Turan and Norazlianie, Sazali (2023) Integrated Assessment of MIG Welding Parameters on Carbon Steel using RSM Optimisation. Journal of Advanced Research in Applied Mechanics, 111 (1). pp. 16-29. ISSN 2289-7895. (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2010) Effect of Dry Cutting on Force and Tool Life when Machining Aerospace Material. International Journal of Mechanical and Materials Engineering, 1 (2). (Published)

K., Kadirgama and M. M., Rahman and A. R., Ismail and R. A., Bakar (2012) Surrogate Modelling to Predict Surface Roughness and Surface Texture When Grinding AISI 1042 Carbon Steel. Scientific Research and Essay , 7 (5). pp. 598-608. ISSN 1992-2248. (Published)

K., Jun Li and Radhiyah, Abd Aziz (2020) Mini review of carbon based additive in machining lubricant. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 61-65. ISSN 2636-9575. (Published)

K., Kadirgama (2020) Nanofluid as an Alternative Coolant in Machining: A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 163-173. ISSN 2289-7879. (Published)

Kamarul Nizam, Hassan and Jamaluddin, Mahmud and Anwar, P. P. Abdul Majeed and Mohd Azman, Yahaya (2018) Quantifying tensile properties of bamboo silicone biocomposite using Yeoh Model. International Journal of Engineering & Technology, 7 (4). pp. 245-250. ISSN 2227-524X. (Published)

Kamil Zakwan, Mohd Azmi and Ahmad Shahrizan, Abdul Ghani and Zulkifli, Md. Yusof and Zuwairie, Ibrahim (2019) Natural-based underwater image color enhancement through fusion of swarm-intelligence algorithm. Applied Soft Computing, 85 (105810). pp. 1-19. ISSN 1568-4946 (print); 1872-9681 (online). (Published)

Kamil Zakwan, Mohd Azmi and Zuwairie, Ibrahim and Pebrianti, Dwi and Mohd Falfazli, Mat Jusof and Nor Hidayati, Abdul Aziz and Nor Azlina, Ab. Aziz (2019) Enhancing simulated kalman filter algorithm using current optimum opposition-based learning. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 1-13. ISSN 2637-0883. (Published)

Kartina, Johan (2015) Perception of Students Towards Lecturers Teaching Engineering Courses with Industry Experience: A Case Study in Malaysia Technical University. Procedia Social and Behavioral Sciences, 195. pp. 925-931. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Kassa, Freselam Mulubrhan and Gebremariam, M. A. (2020) Selection of optimum replacement option for amine pump in a gas processing plant using fuzzy analytical hierarchy process. Journal of Critical Reviews, 7 (5). pp. 899-904. ISSN 2394-5125. (Published)

Keeran, Anamalai and Lingenthiran, Samylingam and K., Kadirgama and Samykano, Mahendran and G., Najafi and D., Ramasamy and M. M., Rahman (2019) Multi-objective optimization on the machining parameters for bio-inspired nanocoolant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1533-1544. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Khaleaf, Hussain K. and Kamarul Hawari, Ghazali and Ajisman, Apen (2013) A Novel Image Edges Detection by Using Gaussian Functions. International Journal of Technology Management, 2. pp. 1-7. ISSN 2289-2753. (Published)

Khaled Abdul Rahman, Jomaa and Cheng, Jack Kie (2017) An integrated model to control traffic lights : controlling of traffic lights in multiple intersections using fuzzy logic and genetic algorithm. Business and Economics Journal, 8 (1). pp. 1-9. ISSN 2151-6219. (Published)

Khilji, Irshad Ahamad and Siti Nadiah, Mohd Saffe and Pathak, Sunil and Chilakamarry, Chaitanya Reddy and Amiril Sahab, Abdul Sani and Reddy, Venugopal Jayarama (2022) Facile manufacture of oxide-free Cu particles coated with oleic acid by electrical discharge machining. Micromachines, 13 (6). pp. 1-10. ISSN 2072-666X. (Published)

Kiethson, Branden Adems and Mohd Khairuddin, Ismail and Anwar P. P., Abdul Majeed and Mohd Razman, Mohd Azraai and Abdullah, Muhammad Amirul and Mohd Isa, Wan Hasbullah (2022) Artificial intelligence approach for fire monitoring and warning system design. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 58-63. ISSN 2637-0883. (Published)

Kit, Tam Jun and Sarah ‘Atifah, Saruchi and Nurhaffizah, Hassan and Nor Aziyatul, Izni (2023) Cyclist fall detection system via the internet of things (IoT). International Journal of Computing and Digital Systems, 13 (1). pp. 1025-1033. ISSN 2210-142X. (Published)

Kobayashi, Ikkei and Ogawa, Kazuki and Uchino, Daigo and Ikeda, Keigo and Kato, Taro and Endo, Ayato and Mohamad Heerwan, Peeie and Narita, Takayoshi and Kato, Hideaki A basic study on hybrid systems for small race car to improve dynamic performance using lap time simulation. Actuators, 11 (7). pp. 1-17. ISSN 2076-0825. (Published)

Koondhar, Mohsin Ali and Laghari, Imtiaz Ali and Asfaw, Belay Million and Reji Kumar, Rajamony and Lenin, A. Haiter (2022) Experimental and simulation-based comparative analysis of different parameters of PV module. Scientific African, 16 (e01197). pp. 1-16. ISSN 2468-2276. (Published)

Kumaresan, Rajan and Mahendran, Samykano and Kumaran, Kadirgama and Wan Sharuzi, Wan Harun and Rahman, Md. Mustafizur (2022) Fused deposition modeling: process, materials, parameters, properties, and applications. The International Journal of Advanced Manufacturing Technology, 120. pp. 1531-1570. ISSN 1433-3015 (Online); 0268-3768 (Printed). (Published)

Kwai, Yang Sak and Ahmad Najmuddin, Ibrahim (2020) Field study of low-energy long-distance wireless communication for IoT application in remote areas. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 52-62. ISSN 2637-0883. (Published)

Kwan, Ze Zhen and Mohd Khairuddin, Ismail and Mohd Razman, Mohd Azraai and Anwar, P. P. Abdul Majeed and Mohd Isa, Wan Hasbullah (2022) Design a precision motion control of an upper limb robotic arm. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 6-15. ISSN 2637-0883. (Published)

L., Sandanamsamy and W. S. W., Harun and I., Ishak and F. R. M., Romlay and K., Kadirgama and D., Ramasamy and S. R. A., Idris and F., Tsumori (2022) A comprehensive review on fused deposition modelling of polylactic acid. Progress in Additive Manufacturing. pp. 1-25. ISSN 2363-9520. (Published)

L. H., Shah and N., Huda and Esmaeili, S. and Walbridge, S. and Gerlich, A. P. (2020) Structural morphology of Al-Mg-Si alloy friction stir welds through tool eccentricity. Materials Letters, 275 (128098). pp. 1-4. ISSN 0167-577X. (Published)

L. M., Keong and Ahmad Shahir, Jamaludin and M. N. M., Razali and A. N. S. Z., Abidin and M. R. M., Yasin (2020) Modelling of PID speed control based collision avoidance system. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 66-72. ISSN 2636-9575. (Published)

Lam, Zhi Kien and Sheikh Muhammad Hafiz Fahami, Zaina (2023) Stability control of humanoid biped robot using PID controllers. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 88-96. ISSN 2637-0883. (Published)

Lau, Ngee Bing and Ismail, Mohd Khairuddin (2023) A PID-controlled approach in the design of a physiotherapy robot for upper arm rehabilitation. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (2). pp. 14-22. ISSN 2637-0883. (Published)

Lee, Helen May Shian and Ismayuzri, Ishak and Mohd Zairulnizam, Mohd Zawawi (2023) Rapid Fabrication of Glass Micro and Nanostructures via Laser-assisted Hot Embossing. JLMN-Journal of Laser Micro/Nanoengineering, 18 (1). pp. 1-7. ISSN 1880-0688. (Published)

Lee, Helen May Shian and Syarifah Nur Hasanah, Syed Kamarudin and Ismayuzri, Ishak and Ahmad Shahir, Jamaludin and Ahmad Rosli, Abdul Manaf and Mohd Zairulnizam, Mohd Zawawi (2021) Laser-assisted thermal imprinting of glass guided mode resonant (GMR) optical filter. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 63-70. ISSN 2636-9575. (Published)

Lee, Ji Zhe and Anwar P. P., Abdul Majeed (2021) Classification of skin cancer by means of transfer learning models. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 77-81. ISSN 2637-0883. (Published)

Lee, Jie Ying and Ahmad Rosli, Abdul Manaf (2022) Investigation of optimum EDM die sinking parameters in micro dimple machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (1). pp. 58-65. ISSN 2636-9575. (Published)

Lee, Wei Loon and Sreekar Reddy, S. and A. K., Prasada Rao (2019) CFD simulation of direct chill casting process of magnesium alloy billets. Journal of Manufacturing Processes, 45. pp. 447-454. ISSN 1526-6125. (Published)

Leong, W. D. and Lam, H. L. and Lim, C. H. and Tan, C. P. and Ponnambalam, S. G. (2019) Outcome based approach to lean and green manufacturing processing. Chemical Engineering Transactions, 72. pp. 361-366. ISSN 2283-9216. (Published)

Leong, W. D. and Teng, S. Y. and How, B. S. and Ngan, S. L. and Lam, H. L. and Tan, C. P. and Ponnambalam, S. G. (2019) Adaptive analytical approach to lean and green operations. Journal of Cleaner Production, 235. pp. 190-209. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Li, Zixiang and Janardhanan, Mukund Nilakantan and Tang, Qiuhua and Ponnambalam, S. G. (2019) Model and metaheuristics for robotic two-sided assembly line balancing problems with setup times. Swarm and Evolutionary Computation, 50 (100567). ISSN 2210-6502. (Published)

Lim, Syh Kai and Ahmad Razlan, Yusoff (2023) Effects of Hybrid Nanocooling-Lubricants MQCL on Machining Temperature and Tool Wear Mechanisms under Turning Process of Titanium Alloy. Tribology Online, 18 (6). pp. 385-395. ISSN 1881-218X(Printed) 1881-2198 (Online). (Published)

Loh, Jit Hao and M. Nafis, O. Z. (2022) A study on obstacle detection for IoT based automated guided vehicle (AGV). Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 30-41. ISSN 2637-0883. (Published)

Luqman Hakim, Ahmad Shah and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2020) Influence of tool eccentricity on the material flow and microstructural properties of AA6061 aluminum alloy friction stir welds. Journal of Alloys and Compounds, 826 (154219). pp. 1-11. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Luqman Hakim, Ahmad Shah and Sonbolestan, Seyedhossein and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2019) Dissimilar friction stir welding of thick plate AA5052-AA6061 aluminum alloys: effects of material positioning and tool eccentricity. The International Journal of Advanced Manufacturing Technology, 105 (1-4). pp. 889-904. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

M., Azwan and M. A., Maleque and M. M., Rahman (2018) TIG torch surfacing of metallic materials - a critical review. Transactions of the IMF, 97 (1). pp. 12-21. ISSN 1745-9192. (Published)

M., Ishak and M. Rafiqul, Islam and Toshiyuki, Sawa (2014) GMA Spot Welding of A7075-T651/AZ31B Dissimilar Alloys using Stainless Steel Filler. Materials and Manufacturing Processes, 29 (8). pp. 980-987. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

M. A., Hassan and Amir Radzi, Ab. Ghani and Zahari, Taha and M. A., Hamdi (2015) Mechanics of Energy Absorption by Progressive Plastic Deformation of a Square Column with an Ellipsoidal Bulge Base. Applied Mathematics & Information Sciences, 9. pp. 51-58. ISSN 1935-0090. (Published)

M. F., Hamizatun and S. A, Haikal and Nik Mohd Zuki, Nik Mohamed (2023) Ergonomic embedded in designing welding assembly tool for automotive manufacturing process. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (2). pp. 23-30. ISSN 2636-9575. (Published)

M. F. F., Ab Rashid (2015) An Improved Mathematical Model to Predict Surface Roughness Using Hybrid Method. International Journal of Materials, Mechanics and Manufacturing, 3 (1). pp. 36-39. ISSN 1793-8198. (Published)

M. F. F., Ab Rashid and Hutabarat, Windo and Tiwari, Ashutosh (2012) Development of a Tuneable Test Problem Generator for Assembly Sequence Planning and Assembly Line Balancing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (11). 1900-1913 . (Published)

M. F. F., Ab Rashid (2017) A Hybrid Ant-Wolf Algorithm to Optimize Assembly Sequence Planning Problem. Assembly Automation, 37 (2). pp. 238-248. ISSN 0144-5154. (Published)

M. F. F., Ab Rashid and A. N. M., Rose and N. M. Zuki, N. M. and F. R. M., Romlay (2019) Improved moth flame optimization algorithm to optimize cost-oriented two-sided assembly line balancing. Engineering Computations, 37 (2). pp. 638-663. ISSN 0264-4401. (Published)

M. F. F., Ab Rashid and Ariff Nijay, Ramli (2023) A new multiobjective tiki-taka algorithm for optimization of assembly line balancing. Engineering Computations. pp. 1-30. ISSN 0264-4401. (In Press / Online First) (In Press / Online First)

M. F. F., Ab Rashid and Hutabarat, Windo and Tiwari, Ashutosh (2016) Multi-Objective Discrete Particle Swarm Optimisation Algorithm for Integrated Assembly Sequence Planning and Assembly Line Balancing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. pp. 1-16. ISSN 2041-2975. (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N., Mohd Rose (2015) Simulation Study of a Vehicle Production Line for Productivity Improvement. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1283-1292. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N., Mohd Rose (2016) A Study of Postural Loading in Malaysian Mining Industry using Rapid Entire Body Assessment. Advances in Smart Systems Research, 5 (1). pp. 30-38. ISSN 2050-8662. (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N. M., Rose (2015) Optimization of Traveling Salesman Problem with Precedence Constraint using Particle Swarm Optimization. Journal of Scienctific Research & Development , 2 (13). pp. 212-216. ISSN 1115-7569. (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and F. R. M., Romlay and M., Jusop (2018) Optimization of travelling salesman problem with precedence constraint using modified GA encoding. Advanced Science Letters, 24 (2). pp. 1484-1487. ISSN 1936-6612. (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and Oumer, A. N. (2022) Modelling and optimization of energy efficient assembly line balancing using modified moth flame optimizer. International Journal of Integrated Engineering, 14 (1). pp. 25-39. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

M. F. F., Ab Rashid and Tiwari, Ashutosh and Hutabarat, Windo (2019) Integrated optimization of mixed-model assembly sequence planning and line balancing using multi-objective discrete particle swarm optimization. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 33 (3). pp. 332-345. ISSN 1469-1760. (Published)

M. F. F., Ab Rashid and Tiwari, Ashutosh and Windo, Hutabarat (2017) Comparison of Sequential and Integrated Optimisation Approaches for ASP and ALB. Procedia CIRP, 63. pp. 505-510. ISSN 2212-8271. (Published)

M. Farid, M. Sharif and M. A. Hanafiah, Saharudin and M. Shaifil Hakimin, M. Sakri and Nur Asyran Wani, Baharom (2014) Experimental Analysis on Cooling Channels Parameters in Hot Stamping Tools (SKD61). American-Eurasian Journal of Sustainable Agriculture, 8 (11). pp. 44-48. ISSN 1995-0748. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and Mahfodzah, M. Padzi (2019) Development of a wireless surface electromyography (sEMG) signal acquisition device for power-assisted wheelchair system. International Journal of Engineering and Advanced Technology, 8 (6). pp. 3414-3418. ISSN 2249-8958. (Published)

M. Haiqal, Hamdan and Mohd Zuhaifi, Zainol and Zubair, Khalil (2022) Simulation of fault detection system of automotive coil spring by using acoustic method. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 95-104. ISSN 2636-9575. (Published)

M. M., Noor and K., Kadirgama and M. M., Rahman (2011) Particle Swarm Optimisation Prediction Model for Surface Roughness. International Journal of Physical Sciences, 6 (13). pp. 3082-3090. ISSN 1992-1950. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama (2011) Current Research Trends on Dry, Near-Dry and Powder Mixed Electrical Discharge Machining. Advanced Materials Research, 264-26. pp. 956-961. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Pattern Recognition Method to Predict Recycling Strategy for Electronic Equipments. Advanced Materials Research, 264-26. pp. 949-955. ISSN 1022-6680. (Published)

M. M., Noor and Talal, Yusaf and Baker, P. and Hamawand, I. (2013) Effect of Compressed Natural Gas Mixing on the Engine Performance and Emissions. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1416-1429. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) Design and Development of MILD Combustion Burner. Journal of Mechanical Engineering and Sciences (JMES) , 5. pp. 664-676. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. M., Rahman and A. A., Adebisi and M. A., Maleque (2011) Metal Matrix Composite Brake Rotor: Historical Development and Product Life Cycle Analysis. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul. pp. 471-480. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. Mukhtar, N. A. and Abd Rashid, Abd Aziz and Hagos, F. Y. and M. M., Noor and K., Kadirgama and R., Mamat and Abdul Adam, Abdullah (2019) The influence of formulation ratio and emulsifying settings on tri-fuel (diesel–ethanol–biodiesel) emulsion properties. Energies, 12 (9). pp. 1-24. ISSN 1996-1073. (Published)

M. N., Mat Nawi and Alzaghir, A. F. and H., Husin and Gebremariam, M. A. and Mohd Azmir, Mohd Azhari (2023) Effect of waterjet cleaning parameters during paint removal operation on automotive steel components. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (2). pp. 31-38. ISSN 2636-9575. (Published)

M. N. M., Baharuddin and Norazwani, Muhammad Zain and Eida Nadirah, Roslin and Wan Sharuzi, Wan Harun and Zaeime, Sulong@Zakaria (2019) Physical properties of homogeneous particleboard based on acacia tree and polyurethane adhesive as a resins. International Journal of Engineering and Advanced Technology, 8 (6). pp. 3382-3387. ISSN 2249-8958. (Published)

M. Nafis, O. Z. and Case, Keith and Watts, Darren (2015) End Mill Tools Integration in CNC Machining for Rapid Manufacturing Processes: Simulation Studies. Production & Manufacturing Research, 3 (1). pp. 274-288. ISSN 2169-3277. (Published)

M. Nafis, O. Z. and Case, Keith and Watts, Darren (2014) Optimization of Roughing Operations in CNC Machining for Rapid Manufacturing Processes. Production & Manufacturing Research, 2 (1). pp. 519-529. ISSN 2169-3277. (Published)

M. R. A., Mohd Reduan and Z., Zulkfli and Zamzuri, Hamedon and Fatchurrohman, Nanang (2022) Effect of Tool Shoulder-to-Pin Diameter Ratio (D/d) on the Mechanical Properties of Friction Stir Processed Mg-Micro Al2O3 Composite. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10103-10111. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. Y., Yuserny and M. H., Aiman and M. M., Quazi and M., Ishak and J., Shamini (2021) Viability of the novel process of indirect laser brazing. Lasers in Engineering, 51 (6). pp. 379-389. ISSN 1029-029X. (Published)

M. Zaini, S. N. A. and M. Saad, S. K. and Jaafar, Nur Najmiyah and Abu, M. Y. (2022) Application of Mahalanobis-Taguchi System in the down-up case of methadone flexi dispensing program. Applied Mathematics and Computational Intelligence, 11 (1). pp. 73-87. ISSN 2289-1315. (Published)

M.M., Razali and M. F. F., Ab Rashid and M. R. A., Make (2020) Assessment of metaheuristic algorithms to optimize of mixed-model assembly line balancing problem with resource constraints. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 73-83. ISSN 2636-9575. (Published)

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Devarajan, Ramasamy and Farhana, Kaniz and Salih, Khalid and Yusaf, Talal (2022) Experimental study on the efficiency improvement of flat plate solar collector using hybrid nanofluids graphene/waste cotton. Energies, 15 (2309). pp. 1-27. ISSN 1996-1073. (Published)

Mahmood, Ahmed and Jabbar, Waheb A. and Hashim, Yasir and Hadi, Manap (2019) Electrical characterization of Ge-FinFET transistor based on nanoscale channel dimensions. Journal of Nano- and Electronic Physics, 11 (1). pp. 1-5. ISSN 2077-6772. (Published)

Mansor, M. A. and Ismail, A. R. and Hamran, N. N. N. and Sarifudin, M. S. (2018) Knowledge management to boost productivity in manufacturing. Journal of Fundamental and Applied Sciences, 10 (3S). pp. 19-31. ISSN 1112-9867. (Published)

Mardina, Abdullah and Badariah, Bais and Alina Marie, Hasbi and Rosadah, Abd Majid and Baharudin, Yatim and Mohd Alauddin, Mohd Ali and Siti Aminah, Bahari and Noridawaty, Mat Daud and Mohd Hezri, Mokhtar and Ahmad Faizal, Mohd Zain and Mhd Fairos, Asillam (2013) Development of UKM-SID Teaching Module for Space Science Education. Procedia - Social and Behavioral Sciences, 102. pp. 80-85. ISSN 1877-0428(print); 1877-0428(online). (Published)

Marini, C. D. and Fatchurrohman, Nanang (2015) A Review On The Fabrication Techniques Of Aluminium Matrix Nanocomposites. Jurnal Teknologi (Sciences and Engineering), 74 (10). pp. 103-109. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Marini, C. D. and Fatchurrohman, Nanang and Azmir, Azhari and Suraya, Sulaiman (2016) Product Development using QFD, MCDM and the Combination of these Two Methods. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Marini, C.D. and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2021) Investigation of wear performance of friction stir processed aluminium metal matrix composites. Materials Today: Proceedings, 40 (4). pp. 1740-1744. ISSN 2214-7853. (Published)

Marini, C.D. and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2021) Morphological study of friction stir processed aluminium metal matrix composites. Materials Today: Proceedings, 40 (4). pp. 1745-1748. ISSN 2214-7853. (Published)

Masitah, Jusop and M. F. F., Ab Rashid (2016) Optimisation of Assembly Line Balancing Type-E with Resource Constraints using NSGA-II. Key Engineering Materials, 701. pp. 195-199. ISSN 1662-9795. (Published)

Mebrahitom, A. and O., Mamat and F., Ahmad and A. K., Prasada Rao (2015) Thermal Shock and Fatigue Behavior of Pressureless Sintered Al2O3–SiO2–ZrO2 Composites. Journal of Advanced Ceramics, 4 (3). ISSN 2226-4108. (Published)

Mehek, Rimsha and Iqbal, Naseem and Javed, Omama and Noor, Tayyaba and Liu, Wei (2024) Improved rate capability and long cycle life of metal-organic framework derived TiO2 @V2O5 composite as an efficient cathode for sodium-ion batteries. Journal of Energy Storage, 78 (109921). pp. 1-15. ISSN 2352-152X. (Published)

Mohamad, M. H. and M. Nafis, O. Z. (2019) Simulation program for 4th axis CNC machining in NX CAM system. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6971-6986. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohamad Shaiful, Abdul Karim and Norazwina, Zainol and Nur izaty Ak'ma, Abu Hassan As'ari and Nurhafizah, Abu Talip Yusof and Nor Hazwani, Aziz (2022) Effect of processing parameters on cellulose content extracted from pineapple leaf. Biocatalysis and Agricultural Biotechnology, 42 (102339). pp. 1-12. ISSN 1878-8181. (Published)

Mohamed Saiful, Firdaus Hussin and Halyani, Mohd. Yassim and Nursabillilah, Mohd. Ali and Muhammad Ashraf, Fauzi and Zulkefli, Ismail and Fatin Farhana, Rosli (2019) Conceptual design approach and ergonomics analysis of fire resistant purpose shield. ARPN Journal of Engineering and Applied Sciences, 14 (6). pp. 1264-1268. ISSN 1819-6608. (Published)

Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Tezara, Cionita and Jamiluddin, Jaafar and Efriyohadi, Agung and Ramli, Junid and Ahmad, Kholil (2019) Water absorption behaviour on the mechanical properties of woven hybrid reinforced polyester composites. The International Journal of Advanced Manufacturing Technology, 104 (1 - 4). pp. 1075-1086. ISSN 0268-3768 (Print); 1433-3015 (Online). (Published)

Mohammad Shahnawaze, Ansari and Mohd Hafiz Dzarfan, Othman and Mohammad Omaish, Ansari and Sana, Ansari and Norazlianie, Sazali (2021) Large spin-dependent tunneling magnetoresistance in Fe3O4/PET heterostructures developed at room temperature: A promising candidate for flexible and wearable spintronics. Materials Science & Engineering: B, 265 (115033). pp. 1-10. ISSN 0921-5107. (Published)

Mohd, Nizar and Arimatsu, Naoya and Kawamitsu, Hiroshi and Takai, Kazuteru and Fukumoto, Masahiro (2016) Study on Optimal Surface Property Of WC-Co Cutting Tool for Aluminium Alloy Cutting. IOP Conference Series: Materials Science and Engineering, 114 (012024). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Mohd Aiman Syahmi, Kamarul Baharin and Ahmad Shahrizan, Abdul Ghani and Normawaty, Mohammad-Noor and Hasnun Nita, Ismail and Syafiq Qhushairy, Syamsul Amri (2022) Automatic phytoplankton image smoothing through integrated dual image histogram specification and enhanced background removal method. The Imaging Science Journal. pp. 1-23. ISSN 1368-2199 (Printed); 1743-131X. (Published)

Mohd Ali Hanafiah, Shaharudin and A. R., Yusoff and Amir, Aziz (2021) Influence of cutting parameters to surface area roughness in dimple machining using milling process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9094-9100. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Ali Hanafiah, Shaharudin and Ahmad Razlan, Yusoff (2023) Using Finite Element simulation to investigate the effect of cutting edge radius on burr formation for inclined dimple milling operation. Jurnal Tribologi, 38. pp. 49-68. ISSN 2289-7232. (Published)

Mohd Ali Hanafiah, Shaharudin and Zahari, Taha (2017) Numerical Model of Heat Transfer Coefficient in Hot Stamping Process. Applied Mathematics & Information Sciences, 11 (2). pp. 401-406. ISSN 1935-0090 (Print); 2325-0399 (Online) . (Published)

Mohd Azhar, Sahwan and Mohd Nizam, Ab Rahman and Baba, Md Deros (2012) Barriers to implement lean manufacturing in Malaysian automotive industry. Jurnal Teknologi (Sciences and Engineering), 59 (2). pp. 107-110. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Azhar, Sahwan and Mohd Nizam A., Rahman and Baba, M. Deros (2014) Case Studies on the Implementation of Lean Manufacturing in the Automotive Malaysian Companies. Applied Mechanics and Materials, 465-46. pp. 1180-1184. ISSN 1662-7482. (Published)

Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff (2014) Bouc-Wen Model Parameter Identification for a MR Fluid Damper Using Particle Swarm Optimization. Advanced Materials Research, 903. pp. 279-284. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Azrul Hisham, Mohd Adib and Khairul Shah, Affendy Yakof and Zulfikar, Anuar and Nizam, Abdullah and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2019) The cardio vascular simulator (CardioVASS) device on monitoring the physiology of blood flow circulation via angiographic image for medical trainee. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 103-111. ISSN 2289-7879. (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak (2019) L-statistical analysis of sound signal acquired from pulse mode laser welding for characterising weld geometry. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6987-7006. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Fadzil Faisae, Ab Rashid (2021) Tiki-taka algorithm: a novel metaheuristic inspired by football playing style. Engineering Computations, 38 (1). pp. 313-343. ISSN 0264-4401. (Published)

Mohd Fadzil Faisae, Ab Rashid and Ariff Nijay, Ramli (2021) A review of assembly line balancing optimisation with energy consideration using meta-heuristic algorithms. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 236 (5). pp. 475-485. ISSN 2041-2975. (Published)

Mohd Fadzil Faisae, Ab Rashid and Muhammad Ammar, N. M. (2022) A novel Tiki-Taka algorithm to optimize hybrid flow shop scheduling with energy consumption. Engineering and Applied Science Research, 49 (2). pp. 189-200. ISSN 2539-6218. (Published)

Mohd Fadzil Faisae, Ab Rashid and Nik Mohd Zuki, Nik Mohamed and Ahmad Nasser, Mohd Rose (2022) Multi-objective multi-verse optimiser for integrated two-sided assembly sequence planning and line balancing. Journal of Combinatorial Optimization, 44 (1). 850 -876. ISSN 1573-2886. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Drilling of bone: Effect of drill bit geometries on thermal osteonecrosis risk regions. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233 (2). pp. 207-218. ISSN 0954-4119. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Drilling of bone: thermal osteonecrosis regions induced by drilling parameters. Biomedical Physics & Engineering Express, 5 (6). 065003-1. ISSN 2057-1976. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2020) Fast & Injurious: Reducing thermal osteonecrosis regions in the drilling of human bone with multi-objective optimization. Measurement, 152 (107835). pp. 1-15. ISSN 0263-2241. (Published)

Mohd Farid, Ismail and Azmi, Wan Hamzah and Rizalman, Mamat and Hamisa, Abdul Hamid (2022) Experimental Investigation on Newtonian Behaviour and Viscosity of TiO2/PVE Nanolubricants for Application in Refrigeration System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 92 (1). pp. 9-17. ISSN 2289-7879. (Published)

Mohd Fawzi, Zamri and A. R., Yusoff (2015) Heuristic Optimization of Cooling Channel Design in the Hot Stamping Die for Hot Stamping Process. Advances in Materials and Processing Technologies, 1 (1-2). pp. 27-35. ISSN 2374-068X (Print), 2374-0698 (Online). (Published)

Mohd Fawzi, Zamri and A. R., Yusoff (2018) Heuristic design of U-shaped die cooling channel for producing ultra-high strength steel using hot press forming. The International Journal of Advanced Manufacturing Technology, 97 (9-12). pp. 4101-4114. ISSN 0268-3768 (Print); 1433-3015 (Online). (In Press / Online First) (In Press / Online First)

Mohd Fawzi, Zamri and Ahmad Razlan, Yusoff (2022) Effect of rake angle and feed rate on tool wear and surface topography for different chip size in machining carbon steels. Jurnal Tribologi, 34 (MITC202ONE (Part 2)). pp. 1-11. ISSN 2289-7232. (Published)

Mohd Fawzi, Zamri and Lim, Syh Kai and A. R., Yusoff (2016) Experimental Validation for Hot Stamping Process by Using Taguchi Method. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Mohd Fawzi, Zamri and Zahari, Taha and A. R., Yusoff and Mohamad Farid, Mohamad Sharif and Mohd Ali Hanafiah, Shaharudin (2014) Comparison of Cooling Performance Between High Thermal Conductivity Steel (HTCS 150) and Hot Work Tool Steel (SKD 61) Insert for Experimental Tool Using Finite Element Analysis. Advanced Materials Research, 903. pp. 163-168. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Hasnun Ariff, Hassan and Tan, F. Y. and M. A., Abdullah and N. Q., Radzuan and K. A., Abu Kassim (2020) Does a circular convex blind spot mirror increase the driver’s field of view? Journal of the Society of Automotive Engineers Malaysia, 4 (1). pp. 44-49. ISSN 2550-2239. (Published)

Mohd Idris Shah, Ismail and Zahari, Taha (2014) Surface Hardening of Tool Steel by Plasma Arc with Multiple Passes. International Journal of Technology, 5 (1). pp. 79-87. ISSN 2086-9614. (Published)

Mohd Irman, Ibrahim and Ong, Huei Ruey and Azrul Zamir, Mohd Idris and Khan, Maksudur R. and Gomes, Martin Discovering the knowledge transfers framework on aero-composite manufacturer in Malaysia. International Journal of Industrial Management (IJIM), 17 (2). pp. 84-89. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Mohd Izzat, Mohd Rahman and Mohd Azraai, Mohd Razman and Abdul Majeed, Anwar P. P. and Muhammad Nur Aiman, Shapiee and Muhammad Amirul, Abdullah and Musa, Rabiu Muazu (2023) Unsupervised Fertigation and Machine Learning for Crop Vegetation Parameter Analysis. International Journal of Intelligent Systems and Applications in Engineering (IJISAE), 11 (3). pp. 417-425. ISSN 2147-6799. (Published)

Mohd Jamil, A. W. and Faridah, A. A. and Nor Marzuina, F. K. N. and Zafirah, Z. F. (2019) Accuracy of conventional computations in assessing volume of small diameter logs of hopea odorata. Journal of Tropical Forest Science, 31 (1). pp. 125-133. ISSN 0128-1283. (Published)

Mohd Noor Hanif, M. R. and Wan Hasrulnizzam, W. H. and Musfirah, A. H. and Muhammad Ashlyzan, R. and Seri Rahayu, K. (2022) Organizing the Internal Manufacturing Complexity Elements in Adaptation of Current Manufacturing Environment: A Fuzzy Approach. Journal of Mechanical Engineering, 19 (2). pp. 169-185. ISSN 1823-5514. (Published)

Mohd Rashidi, Maarof and Mohd Hasbullah, Idris (2013) Effect of Inoculation On Microstructure, Mechanical and Corrosion Properties of High Manganese Ductile Ni-resist Alloy. Materials and Design, 51 (Oktober). pp. 861-869. ISSN 0261-3069. (Published)

Mohd Said, Rahaini and A Aziz, Khairul Azha and Zainal Abidin, Amar Faiz and Mat Jizat, Jessnor Arif and Mohd Khairuddin, Ismail and Widiyanto, Sigit and Abdul Waduth, Mohamed Faisal (2022) A study on the parameter selection of bat algorithm in in optimizing parameters in camera auto calibration problem. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 50-55. ISSN 2637-0883. (Published)

Mohd Salleh, Abdul Rahim and Izwan, Ismail and S. N., Aqida (2017) Effects of Nano Copper Additive on Thermal Conductivity of Magnetorheological Fluid at Different Environment Temperature. Materials Science Forum, 890. pp. 108-111. ISSN 0255-5476. (Published)

Mohd Syahray Izham, Muhazihat and Nurrina, Rosli and Radhiyah, Abd Aziz and Abdul Aziz, Jaafar (2018) Potential of direct evaporative cooling system under metal plate attachment to wetted pad application. Journal of Modern Manufacturing Systems and Technology, 1. pp. 69-75. ISSN 2636-9575. (Published)

Mohd Yazid, Abu and Nik Nurharyantie, Nik Mohd Kamil and Sri Nur Areena, Mohd Zaini (2021) Feasibility study on the implementation of mahalanobis taguchi system and time driven activity based costing in electronic industry. International Journal of Industrial Management (IJIM), 10 (1). pp. 160-172. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Mohd Yazid, Abu and Nurul Farahin, Zamrud and Sri Nur Areena, Mohd Zaini (2021) A case study on the application of activity based costing on the magnetic inductor. International Journal of Industrial Management (IJIM), 10 (1). pp. 195-205. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Mohd Yazid, Abu and Sri Nur Areena, Mohd Zaini (2021) Constructing a new cost structure using time-driven activity based costing for replanting at palm oil plantation. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 55-69. ISSN 2289-679X (Print); 2462-1269 (Online). (Published)

Mohd Yazid, Abu and Sri Nur Areena, Mohd Zaini (2021) Development a new costing structure using time driven activity-based costing for palm oil plantation. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 11-25. ISSN 2289-679X (Print); 2462-1269 (Online). (Published)

Mohd Yazid, Abu and Sri Nur Areena, Mohd Zaini and N.N.N.M., Kamil (2021) A case study on the application of Mahalanobis-Taguchi system for magnetic component. International Journal of Engineering Technology And Sciences (IJETS), 7 (2). pp. 1-12. ISSN 2289-679X (Print); 2462-1269 (Online). (Published)

Mohd Yusoof, M. Y. and Nik Mohamed, N. M. Z. and Nelfiyanti, . and Md Yasir, A. S. H. (2023) The assessment of man and method toward the assembly line improvement in automotive manufacturing. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (1). pp. 7-14. ISSN 2636-9575. (Published)

Mohd Zaidi, Sidek (2016) Determination of Heat Transfer Coefficient for an Interaction of Sub-cooled Gas and Metal. Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-899X. (Published)

Mohd Zaidi, Sidek and Mohd Syahidan, Kamarudin and Mohamad Nafis, Jamaluddin (2015) Simulation and Fabrication of Open-Type Boiler of Fish Cracker Production Line. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

Mohd Zaidi, Sidek and Muhammad Afiq Miqhail, Johari (2022) Study on effectiveness of air-horn device for bird deterrent in paddy cultivation area. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). 90 -94. ISSN 2636-9575. (Published)

Molamohamadi, Zohreh and Arshizadeh, Rahman and Napsiah, Ismail and Amir, Azizi (2014) An economic order quantity model with completely backordering and nondecreasing demand under two-level trade credit. Advances in Decision Sciences, 2014 (340135). pp. 1-11. ISSN 2090-3359. (Published)

Moniruzzaman, M. and Rakib, M. M. and Matin, F. T. (2012) Cr-Ni Alloy Electrodeposition and Comparison with Conventional Pure Cr Coating Technique. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 692-700. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mubarik, Abdirisak and Sarah ‘Atifah, Saruchi and Mahmud Iwan, Solihin and Teh, Boon Hong and Ng, Weng Kent (2023) A mini review on nanorobots in medical field: Applications and challenges. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 13-17. ISSN 2637-0883. (Published)

Muchamad , Oktaviandri and Adnan, Hassan and Awaluddin, Mohd. Shaharoun (2016) Generation of Look-Up Tables for Dynamic Job Shop Scheduling Decision Support Tool. Materials Science and Engineering, 114. pp. 1-9. (Published)

Muhamad Afiq, Izuan and Nor Imrah, Yusoff (2022) Simulation of heat generation in friction surface cladding (FSC) of multilayer AA2024. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 63-68. ISSN 2636-9575. (Published)

Muhamad Azwar, Azhari and Nor Hasrul Akhmal, Ngadiman and Noordin, Mohd Yusof and Ani, Idris and Norazlianie, Sazali (2023) Feasibility Studies of Treated Used Cooking Palm Oil as Precursor for Bio-Lubricant. Journal of Advanced Research in Applied Mechanics, 111 (1). pp. 30-37. ISSN 2289-7895. (Published)

Muhamad Azwar, Azhari and Nor Hasrul Akhmal, Ngadiman and Noordin, Mohd Yusof and Ani, Idris and Norazlianie, Sazali (2023) Influence of Molybdenum Disulphide (MoS2) Nanoparticles Loading in Treated Used Palm Oil Bio-lubricant on Surface Roughness during Turning of AISI420. Journal of Advanced Research in Micro and Nano Engineering, 14 (1). pp. 1-7. ISSN 2756-8210. (Published)

Muhamad Magffierah, Razali and M. F. F., Ab Rashid and Muhammad Razif, Abdullah Make (2017) Optimization of Automotive Manufacturing Layout for Productivity Improvement. Journal of Mechanical Engineering , SI 4 (1). pp. 171-184. ISSN 1823- 5514(print); 2550-164X(online). (Published)

Muhammad Adib , Shaharun and A. R., Yusoff (2015) Effects of Irregular Tool Geometry and Machining Process Parameters on the Wavelength Performance of Process Damping in Machining Titanium Alloy at Low Cutting Speed. The International Journal of Advanced Manufacturing Technology. pp. 1-15. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Muhammad Aizzat, Zakaria and Jabbar, Waheb A. and Noorazliza, Sulaiman (2023) Development of a smart sensing unit for LoRaWAN-based IoT flood monitoring and warning system in catchment areas. Internet of Things and Cyber-Physical Systems, 3. pp. 249-261. ISSN 2667-3452. (Published)

Muhammad Aizzat , Zakaria and Hairi, Zamzuri and Saiful Amri, Mazlan (2016) Dynamic Curvature Steering Control for Autonomous Vehicle: Performance Analysis. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Muhammad Arieffuddin, Mohd Jamil and Fadhlur Rahman, Mohd Romlay and Khairul Fikri, Muhammad and Shamsudin, Abdul Samat and Ismayuzri, Ishak (2021) Pressure based control for a variable speed diesel engine driven pump controller. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 65-69. ISSN 2637-0883. (Published)

Muhammad Arif, Abdullah and M. F. F., Ab Rashid and Z., Ghazalli (2019) Optimization of Assembly Sequence Planning Using Soft Computing Approaches: A Review. Archives of Computational Methods in Engineering, 26 (2). pp. 461-474. ISSN 1886-1784. (Published)

Muhammad Daniel Haiqal, Mansor and Noor Mazni, Ismail (2022) Compressive strength of the 5cmx5cm coconut empty fruit bunch fiber reinforced cement cubes. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 105-110. ISSN 2636-9575. (Published)

Muhammad Faez, Mohamad Tajudin and Asnul Hadi, Ahmad and Juliawati, Alias and Nur Azhani, Abd Razak and Nasrul Azuan, Alang (2023) Grain refinement in semi‐solid metal processing: current status and recent development. The International Journal of Advanced Manufacturing Technology, 124. pp. 1379-1399. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Muhammad Fahmi Izuwan, Samion and Nur Ziana, Norizat and Ahmad Redza, Ahmad Mokhtar (2020) Flow study in structure of the plasma torch for microwave plasma spray. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 56-60. ISSN 2636-9575. (Published)

Muhammad Ihsan, Abdul Latiff and Siti Nur Sakinah, Jamaludin and Shahnor, Basri and Ahmad, Hussain and Dheya, Shuja Alothmany and Faizal, Mustapha and Nuruzzaman, D. M. and Noor Mazni, Ismail and Izwan, Ismail (2014) Effect of sintering temperature on functionally graded nickel/alumina plate. Applied Mechanics and Materials, 629. pp. 437-443. ISSN 1662-7482. (Published)

Muhammad Irfan Syahmi, Sidun and Ismayuzri, Ishak (2023) Bead characterization for wire based laser directed energy deposition fabrication process. Jurnal Teknologi, 13 (2). pp. 58-64. ISSN 2541-1535. (Published)

Muhammad Nur Aiman, Shapiee and Muhammad Ar Rahim, Ibrahim and Muhammad Amirul, Abdullah and Rabiu Muazu, Musa and Noor Azuan, Abu Osman and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman (2020) The classification of skateboarding tricks : A transfer learning and machine learning approach. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 1-12. ISSN 2637-0883. (Published)

Muhammad Razif, Abdullah Make and M. F. F., Ab Rashid (2020) Optimisation of two-sided assembly line balancing with resource constraints using modified particle swarm optimisation. Scientia Iranica. pp. 1-38. ISSN 1026-3098. (Published)

Muhammad Razif, Abdullah Make and M. F. F., Ab Rashid and Muhamad Magffierah, Razali and Manugari, Perumal (2017) Assembly Line Balancing using Heuristic Approaches in Manufacturing Industry. Journal of Mechanical Engineering, SI 4 (2). pp. 171-185. ISSN 1823-5514. (Published)

Muhammad Shafinaim Akmal, Zulkifli and Ahmad Shahrizan, Abdul Ghani and Mohd Yazid, Abu and Fusaomi, Nagata (2023) Development of controllino program to integrate the sensor inputs for motors control. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 36-45. ISSN 2637-0883. (Published)

Muhammad Syafiq, Idris and Irnie Azlin, Zakaria and Wan Azmi, Wan Hamzah and Wan Ahmad Najmi, Wan Mohamed (2021) The characteristics of hybrid Al2O3:SiO2 nanofluids in cooling plate of PEMFC. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (3). pp. 96-109. ISSN 2289-7879. (Published)

Muhammad Syahrir, Ahmad and Ahmad Rosli, Abdul Manaf (2024) Hot Embossing of Micro Grating and Its Replication Accuracy. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 118-137. ISSN 2289-7895. (Published)

Muhammad Yusuff Izzuddin, Roslan and Ahmad Redza, Ahmad Mokhtar (2022) Metal coating by TIG arc deposition method. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 111-118. ISSN 2636-9575. (Published)

Munanday, Anbananthan Pillai and Norazlianie, Sazali and Asogan, Arjun and Ramasamy, Devarajan and Ahmad Shahir, Jamaludin (2023) The Implementation of Transfer Learning by Convolution Neural Network (CNN) for Recognizing Facial Emotions. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 255-276. ISSN 2462-1943. (Published)

Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Ahmad Fakhri, Ab. Nasir and Mohd Hasnun Ariff, Hassan and Mohd Azraai, Mohd Razman (2019) Technical and tactical performance indicators discriminating winning and losing team in elite Asian beach soccer tournament. PLoS ONE, 14 (6). pp. 1-10. ISSN 1932-6203. (Published)

Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Zahari, Taha (2019) A machine learning approach of predicting high potential archers by means of physical fitness indicators. PLoS ONE, 14 (1). pp. 1-12. ISSN 1932-6203. (Published)

Mussada, Eswara Krishna and Choo, Chee Hua and Prasada Rao, A. K. (2018) Surface hardenability studies of the die steel machined by WEDM. Materials and Manufacturing Processes, 33 (16). pp. 1745-1750. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

N, Abdul Wahab and Fatchurrohman, Nanang and Z., Zulkfli (2020) Investigation on the effect of different friction stir machining tools shape on the mechanical properties of magnesium alloy work piece. IOP Conference Series: Earth and Environmental Science, 700. pp. 1-9. ISSN 1755-1307(Print); 1755-1315(Online). (Published)

N. E. H., Zamiruddin and Nurrina, Rosli (2020) Application of minimum quantity lubrication for various machining processes - A mini review. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 40-47. ISSN 2636-9575. (Published)

N. F., Jamin and N. M. A., Ghani and Zuwairie, Ibrahim and M. F., Masrom and N. A. A, Razali and A. M., Almeshal (2018) Two-wheeled wheelchair stabilization using interval type-2 fuzzy logic controller. International Journal of Simulation Systems, Science & Technology (IJSSST), 19 (3). 3.1-3.7. ISSN 1473-8031 (print); 1473-804x (online). (Published)

N. F., Zamrud and S.N.A.M., Zaini and M. Y., Abu (2020) A case study on the determination of unused capacity using time driven activity-based costing for electronic component. International Journal of Engineering Technology And Sciences (IJETS), 7 (2). pp. 74-85. ISSN 2289-697X. (Published)

N. F. A., Ghani and S. N. A. M., Zaini and Mohd Yazid, Abu (2020) Assessment the unused capacity using time driven activity based costing in automotive manufacturing industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 82-94. ISSN 2636-9575. (Published)

N. H. K., Anuar and Mohd Nizar, Mhd Razali and Mohamad Rusydi, Mohamad Yasin and Musfirah, Abdul Hadi and Abdul Nasir, Abd Ghafar (2021) Custom centrifugal pump performance in supplying high viscos liquid. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 80-88. ISSN 2636-9575. (Published)

N. M., Yahya and Tokhi, M. O. (2017) A Modified Bats Echolocation-Based Algorithm for Solving Constrained Optimisation Problems. International Journal of Bio-Inspired Computation, 10 (1). pp. 12-23. ISSN 1758-0366 . (Published)

N. S., Mohamed and Juliawati, Alias (2019) The influence of friction stir welding of dissimilar AZ31 and AZ91 magnesium alloys on the microstructure and tensile properties. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6675-6683. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. W., Awang and D., Ramasamy and K., Kadirgama and Najafi, G. and Nor Azwadi, Che Sidik (2019) Study on friction and wear of Cellulose Nanocrystal (CNC) nanoparticle as lubricating additive in engine oil. International Journal of Heat and Mass Transfer, 131. pp. 1196-1204. ISSN 0017-9310. (Published)

Nabiilah, Ab Rahim and Zamzuri, Hamedon and Faiz, Mohd Turan (2017) Bits Reduction in the Electrodeposition Process of a Pickup Truck – A case study. Jordan Journal of Mechanical and Industrial Engineering, 11 (1). pp. 27-33. ISSN 1995-6665. (Published)

Nabiilah, Ab Rahim and Zamzuri, Hamedon and Faiz, Mohd Turan (2018) Improving Quality of Light Commercial Vehicle Using PDCA Approach. Journal of Advanced Manufacturing Technology, 12 (1). pp. 525-533. ISSN 2289-8107. (Published)

Nafrizuan, Mat Yahya and A. R., Yusoff and Azlyna, Senawi and Tokhi, M. Osman (2019) Dual level searching approach for solving multi objective optimisation problems using hybrid particle swarm optimisation and bats echolocation-inspired algorithms. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 45-57. ISSN 2637-0883. (Published)

Nagahiro, R. and Nurrina, Rosli and Hangai, Y. and Yano, A. and Amagai, Kenji (2019) Uniform Heating Model Analysis for the Formation Process of Aluminium Foam by Spot-Type Halogen Lamp. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (4). pp. 7170-7180. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2016) Environmental Impacts and Hazards Associated With Metal Working Fluids and Recent Advances in the Sustainable Systems: A Review. Renewable and Sustainable Energy Reviews, 60. pp. 1008-1031. ISSN 1364-0321. (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2013) Modeling of the end milling process for aluminum alloy AA6061T6 using hss tool. International Journal of Automotive and Mechanical Engineering (IJAME), 8 (1). pp. 1140-1150. ISSN 2180-1606. (Published)

Najwa Wahida, Zainal Abidin and M. F. F., Ab Rashid and N. M. Zuki, N. M. (2017) A Review of Multi-holes Drilling Path Optimization Using Soft Computing Approaches. Archives of Computational Methods in Engineering. pp. 1-12. ISSN 1134-3060(print); 1886-1784(online). (In Press / Online First) (In Press / Online First)

Naqibah, Azman and Nik Hisyamudin, Muhd Nor and Mohd Fahrul, Hassan and Mohd Hafiz, Burhan and Siti Zarina, Mohd Muji and Fariza, Mohamad and Faiz, Mohd Turan and Abdul Rahman, Bahasa and Seiji, Yokoyama (2020) Industrial guideline for injection moulding: case of jaundice meter. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.1). pp. 299-303. ISSN 2278-3091. (Published)

Naseer, Abqaat and Faiz, Ahmad and Aslam, Muhammad and Beh, Hoe Guan and Wan Sharuzi, Wan Harun and Norhamidi, Muhamad and Muhammad Rafi, Raza and German, Randall M. (2019) A review of processing techniques for graphene-reinforced metal matrix composites. Materials and Manufacturing Processes, 34 (9). pp. 957-985. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

Nawanir, Gusman and Fernando, Yudi and Lim, Kong Teong (2021) The complementarity of lean manufacturing practices with importance-performance analysis: how does it leverage inventory performance? International Journal of Services and Operations Management, 39 (2). pp. 212-234. ISSN 1744-2389. (Published)

Nazira, Mahmud and Rosentrater, Kurt A. (2019) Life-cycle assessment (LCA) of different pretreatment and product separation technologies for butanol bioprocessing from oil palm frond. Energies, 13 (1). pp. 1-21. ISSN 1996-1073. (Published)

Neeta L., Lala and Rajan, Jose and M. M., Yusoff and Seeram, Ramakrishna (2012) Continuous Tubular Nanofibers of Vanadium Pentoxide by Electrospinning for Energy Storage Devices. Journal of Nanoparticle Research, 14. p. 1201. ISSN 1388-0764 (print), 1572-896X (online). (Published)

Nelfiyanti, . and N. M. Zuki, N. M. (2020) Quick response manufacturing and ergonomic consequences in manufacturing environment. Conf. Series: Materials Science and Engineering, 788 (1). pp. 1-10. ISSN 1757-899X. (Published)

Nik Nurharyantie, Nik Mohd Kamil and Mohd Yazid, Abu (2018) Integration of Mahalanobis-Taguchi System and activity based costing for remanufacturing decision. Journal of Modern Manufacturing Systems and Technology, 1. pp. 39-51. ISSN 2636-9575. (Published)

Nizam Hafiz, Bandi and Ahmad Nazif, Noor Kamar and Cheng, Jack Kie (2022) Investigating the impact of lean manufacturing practices on operational performance. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 42-47. ISSN 2636-9575. (Published)

Nolia, Harudin and Faizir, Ramlie and Wan Zuki Azman, Wan Muhamad and M. N., Muhtazaruddin and Khairur Rijal, Jamaludin and Mohd Yazid, Abu and Zulkifli Marlah, Marlan (2021) Binary bitwise artificial bee colony as feature selection optimization approach within Taguchi’s T-method. Mathematical Problems in Engineering, 2021 (5592132). pp. 1-10. ISSN 1024-123X (print); 1563-5147 (online). (Published)

Nolia, Harudin and Faizir, Ramlie and Wan Zuki Azman, Wan Muhamad and Muhtazaruddin, M. N. and Khairur Rijal, Jamaludin and Mohd Yazid, Abu and Zulkifli Marlah, Marlan (2021) Binary bitwise artificial bee colony as feature selection optimization approach within taguchi's t-method. Mathematical Problems in Engineering, 2021. pp. 1-10. ISSN 1024-123X. (Published)

Noor Danish, N. H. D. and Musfirah, Abdul Hadi (2022) Optimization of cutting parameter for machining Ti-6Al-4V titanium alloy. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (1). 53- 57. ISSN 2636-9575. (Published)

Noor Maizura, Ismail and Nur Afaliza, Yusaini and Jannah, Jafa and S. M., Anisuzzaman and Chiam, Chel Ken and Nurmin, Bolong and A. R., Razali and Ahmad Fauzi, Ismail (2020) Carbon dioxide/methane separation performance by mixed matrix membrane from polysulfone/ halloysite nanotubes. Jurnal Teknologi (Sciences and Engineering), 82 (3). pp. 91-100. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Nor Athira, Jamaluddin and Norfazillah, Talib and Amiril, S. A.S. (2021) Performance comparative of modified jatropha based nanofluids in orthogonal cutting process. Evergreen, 8 (2). pp. 461-468. ISSN 2189-0420. (Published)

Nor Azlina, Ab. Aziz and Zuwairie, Ibrahim and Marizan, Mubin and Sophan Wahyudi, Nawawi and Mohd Saberi, Mohamad (2018) Improving particle swarm optimization via adaptive switching asynchronous – synchronous update. Applied Soft Computing, 72. pp. 298-311. ISSN 1568-4946. (Published)

Nor Imrah, Yusoff and L. H., Sulaiman (2023) Influence of clad layer thickness of aluminium alloy by friction surface cladding process. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (2). pp. 17-22. ISSN 2636-9575. (Published)

Nor Shuhada, Ibrahim and Nafrizuan, Mat Yahya and Saiful Bahri, Mohamed (2022) Metaheuristic nature-inspired algorithms for reservoir optimization operation: A systematic literature review. Indonesian Journal of Electrical Engineering and Computer Science, 26 (2). pp. 1050-1059. ISSN 2502-4752. (Published)

Noraini, Mohd Razali (2015) An Efficient Genetic Algorithm for Large Scale Vehicle Routing Problem Subject to Precedence Constraints. Procedia - Social and Behavioral Sciences, 195. pp. 1922-1931. ISSN 1877-0428, ESSN: 1877-0428. (Published)

Norazlianie, Sazali (2020) Emerging technologies by hydrogen: A review. International Journal of Hydrogen Energy, 45 (38). pp. 18753-18771. ISSN 0360-3199. (Published)

Norfazilasari, Yasman and Raja Murfiqah, Raja Mohd Fouzy and Mohd Zairulnizam, Mohd Zawawi (2024) Fabrication of Polymer Light Guide Plate (LGP) using Direct CO2 Laser Structuring. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 79-91. ISSN 2289-7895. (Published)

Norhamiza, Hamzah and Siti Zubaidah, Ismail (2020) Integrating comprehensive industrial raw material delivery planning and product-service system inventory control. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 14-22. ISSN 2636-9575. (Published)

Norhana, Mohd Aripin and Nawanir, Gusman and Fatimah, Mahmud and Muhammad Ashraf, Fauzi and Suhaidah, Hussain and Lee, Khai Loon (2023) Systematic literature review: Theory perspective in lean manufacturing performance. Management Systems in Production Engineering, 31 (2). pp. 230-241. ISSN 2299-0461. (Published)

Norlida, Jamil and A. R., Yusoff (2016) Electromagnetic Actuator for Determining Frequency Response Functions of Dynamic Modal Testing on Milling Tool. Measurement, 82. pp. 355-366. ISSN 0263-2241. (Published)

Noroozi, Siamak and A. G. A., Rahman and Eng, H. C. and Dupac, M. and Ong, Zhi Chao and Khoo, Shin Yee and Kong, K. K. (2019) A novel investigation into the application of non-destructive evaluation for vibration assessment and analysis of in-service pipes. Nondestructive Testing and Evaluation, 34 (4). pp. 413-428. ISSN 1058-9759. (Published)

Norsafiah, Fazli and Noor Sabrina, Ahmad Mutamim and Nur Maizatul, Azwan and Nurul Aisyah, Mohd Ramli Microbial fuel cell (MFC) in treating spent caustic wastewater: varies in hydraulic retention time (HRT) and mixed liquor suspended solid (MLSS). Journal of Environmental Chemical Engineering, 6 (4). pp. 4339-4346. ISSN 2213-3437. (Published)

Norsuhailizah, Sazali and Zawati, Harun and Norazlianie, Sazali (2024) Additional of Organic Amendments in the Soil to Increase the Various Crop Yield: A Review. Journal of Advanced Research in Applied Sciences and Engineering Technology, 35 (2). pp. 158-174. ISSN 2462-1943. (Published)

Norsuhailizah, Sazali and Zawati, Harun and Norazlianie, Sazali and Afdhal, Junaidi (2023) Optimizing Fruit Growth in Cherry Tomato (Solanum lycopersicum): A Zeolite LTA Mass Approach. Journal of Advanced Research Design, 73 (1). pp. 1-4. ISSN 2289-7984. (Published)

Nur Ameerah, Hakimi and Mohd Azhar, Mohd Razman and Anwar P. P., Abdul Majeed (2021) The classification of Covid-19 cases through the employment of transfer learning on X-ray images. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 44-51. ISSN 2637-0883. (Published)

Nur Hairunnisa, Kamarudin and M. F. F., Ab Rashid (2017) Assembly Line Balancing with Resource Constraints using New Rank-Based Crossovers. Journal of Physics: Conference series, 908 (012059). pp. 1-7. ISSN 1742-6588 (print); 1742-6596 (online). (Published)

Nur Khalidah, Zainuddin and Noor Saadiah, Mohd Ali and Anwar, P. P. Abdul Majeed and Ahmad Salihin, Samsudin (2018) Characterization on conduction properties of carboxymethyl cellulose/kappa carrageenan blend-based polymer electrolyte system. International Journal of Polymer Analysis and Characterization, 23 (4). pp. 321-330. ISSN 1023-666X. (Published)

Nur Naajihah, Ab Rahman and Nafrizuan, Mat Yahya and Mohd Haziq, Na'im Amin and Nur Iffah, Mohamed Azmi (2023) Application of modified adaptive bats sonar algorithm with doppler effect and levy flight (MABSA-DELF) to optimize mechanical engineering problems. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (2). pp. 32-40. ISSN 2637-0883. (Published)

Nuraini, Abdullah and Noor Mazni, Ismail and Dewan Muhammad, Nuruzzaman (2018) The influence of growth temperature on the properties of zinc oxide by thermal oxidation. Malaysian Journal of Analytical Sciences, 22 (6). pp. 1084-1089. ISSN 1394 - 2506. (Published)

Nuramirah, Che Lah and Noor Mazni, Ismail (2019) Empty fruit bunch (EFB) fibers as reinforcement in polypropylene. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 84-92. ISSN 2636-9575. (Published)

Nurrina, Rosli and Nur Izzati Khoirunnisa, Ismail and Amiril Sahab, Abdul Sani and Afifah Nailah, Muhamad (2023) Investigation of Lubricant Oil Film Thickness on Workpiece under Minimum Quantity Lubrication Milling Process. Tribology Online, 18 (6). pp. 365-372. ISSN 1881-218X(Printed) 1881-2198 (Online). (Published)

Nursyiqah, Jasman and Ahmad Shahir, Jamaludin and M. N. N., Razali and A. N. A., Ghafar and M. A., Hadi (2020) Design of spline surface vacuum gripper for pick and place robotic arms. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 48-55. ISSN 2636-9575. (Published)

Nurul Afiqah , Zainal and Ajisman, Apen and A. R., Yusoff (2016) Modelling of Photovoltaic Module Using Matlab Simulink. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-9. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Nurul Akmal, Che Lah (2023) Tunable Functionality of Pure Nano Cu- and Cu-based Oxide Flexible Conductive Thin Film with Superior Surface Modification. Surfaces and Interfaces, 38 (102819). ISSN 2468-0230. (Published)

Nurul Akmal, Che Lah and Aqilah, Kamaruzaman (2019) The optical quantification measurement on aggregated aqueous ZnO nanostructures upon exposure to tannic acid. Materials Research Express, 6 (12). ISSN 2053-1591. (Published)

Nurul Akmal, Che Lah and Aqilah, Kamaruzaman and Trigueros, Sonia (2020) pH-dependent formation of oriented zinc oxide nanostructures in the presence of tannic acid. Nanomaterials, 11 (1). pp. 1-14. ISSN 2079-4991. (Published)

Nurul Akmal, Che Lah and Gray, Robert and Trigueros, Sonia (2021) Synthesis, characterisation and cytotoxicity of gold microwires for ultra-sensitive biosensor development. Microbial Cell Factories, 20 (1). pp. 1-11. ISSN 1475-2859. (Published)

Nurul Akmal, Che Lah and Muhammad Nasrulamin, Mesran and Mohd Mawardi, Saari (2020) Frequency-dependent of AC susceptibility in chitosan oligosaccharide-Ag nanostructures. Journal of Alloys and Compounds, 835 (155366). pp. 1-16. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Nurul Akmal, Che Lah and Murthy, Puhanes and Mohd Nashrul, Mohd Zubir (2022) The physical and optical investigations of the tannic acid functionalised Cu‑based oxide nanostructures. Scientific Reports, 12 (1). pp. 1-20. ISSN 2045-2322. (Published)

Nurul Akmal, Che Lah and Puhanes, Murthy and Mohd Nashrul, Mohd Zubir (2022) The physical and optical investigations of the tannic acid functionalised Cu-based oxide nanostructures. Scientific Reports, 12 (9909). pp. 1-20. ISSN 2045-2322. (Published)

Nurul Farahin, Zamrud and Mohd Yazid, Abu (2020) Comparative study: Activity based costing and time driven activity based costing in electronic industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 68-81. ISSN 2636-9575. (Published)

Nurul Farhana, Abu Kassim and Wan Farhana, Wan Idris and Abu Hannifa, Abdullah and Kamal, Yusoh and Zulhelmi, Ismail (2020) The preparation of graphene ink from the exfoliation of graphite in pullulan, chitosan and alginate for strain-sensitive paper. International Journal of Biological Macromolecules, 153. pp. 1211-1219. ISSN 0141-8130. (Published)

Nurul Farhana, Mohadzir and Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2020) In-situ worn geometry effect over the surface roughness propagation during micro milling process. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 1-7. ISSN 2636-9575. (Published)

Nurul Haziyani, Aris and Mohd Yazid, Abu and Sri Nur Areena, Mohd Zaini and Muhammad Arieffudin, Mohd Jamil and Nur Syafikah, Punueh and Wan Zuki Azman, Wan Muhamad and Faizir, Ramlie and Nolia, Harudin and Sari, Emelia (2023) Mahalanobis-taguchi system and time-driven activity-based costing integration of printed circuit board. Journal of Theoretical and Applied Information Technology, 101 (24). pp. 8247-8261. ISSN 1992-8645 (print); 817-3195 (online). (Published)

Nurul Hidayah, Razak and Zhan, W. Chen and Timotius, Pasang (2017) Effects of Increasing Feed Rate on Tool Deterioration and Cutting Force during End Milling of 718Plus Superalloy Using Cemented Tungsten Carbide Tool. Metals, 7 (10). pp. 1-14. ISSN 2075-4701. (Published)

Nurul Huda, Abu Bakar and Ali, Gomaa A. M. and Jamil, Ismail and Algarni, H. and K. F., Chong (2019) Size-dependent corrosion behavior of graphene oxide coating. Progress in Organic Coatings, 134. pp. 272-280. ISSN 0300-9440. (Published)

Nurul Najihaha, . and Gebremariam, M. A. and Azmir, Azhari and Mulubrhan, Freselam (2021) Simulation modeling of a manufacturing process using Tecnomatix plant simulation software. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 56-62. ISSN 2636-9575. (Published)

Nuruzzaman, D. M. and Siti Nur Sakinah, Jamaludin and Faizal, Mustapha and Shah Nor, Basri (2013) A Review on the Fabrication Techniques of Functionally Graded Ceramic-Metallic Materials in Advanced Composites. Scientific Research and Essay , 8 (21). pp. 828-840. ISSN 1992-2248. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. (2012) Friction Coefficient and Wear Rate of Copper and Aluminum Sliding against Mild Steel. International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies , 4 (1). pp. 29-40. ISSN 2228-9860(print); 1906-9642(online). (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Roy, B. K. and Sorker, N. Ch. and Karim, R. and Hasan, M. and Mia, S. (2014) Experimental Study on Friction Coefficient and Wear Rate of Gun Metal Sliding Against Different Counterface Materials. Journal of the Balkan Tribological Association, 20 (2). pp. 169-183. ISSN 1310-4772. (Published)

Nuruzzaman, D. M. and Rahaman, Mohammad Lutfar and Chowdhury, M. A. (2014) Experimental Investigation on Friction Coefficient of Engineering Polymers Sliding Against Different Counterface Materials. Advanced Materials Research, 903. pp. 90-95. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Obed M., Ali and R., Mamat and C. K. M., Faizal (2014) Characterization of Blended Biodiesel Fuel Properties with Small Portion of Butanol as a Fuel Additive. Applied Mechanics and Materials, 465-46. pp. 137-141. ISSN 1662-7482. (Published)

Oktaviandri, Muchamad and Kah, Keat Foong (2019) Design and development of visitor management system. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 73-79. ISSN 2637-0883. (Published)

Olalere, Olusegun Abayomi and Nour, A. H. and R. M., Yunus and Alara, Oluwaseun Ruth (2017) Multi-response optimization and neural network modeling for parameter precision in heat reflux extraction of spice oleoresins from two pepper cultivars (Piper nigrum). Journal of King Saud University - Science, 31 (4). pp. 789-797. ISSN 1018-3647. (Published)

Omar, Ibrahim Ayasrah and Faiz, Mohd Turan (2020) Research gaps in multi-criteria decision making methods for researchers as an areas of interest. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 1-6. ISSN 2636-9575. (Published)

Ooi, Peng Toon and Muhammad Aizzat, Zakaria and Ahmad Fakhri, Ab. Nasir and A. P. P., Abdul Majeed and Chung, Young Tan and Leonard Chong, Yew Ng (2019) Autonomous tomato harvesting robotic system in greenhouses: deep learning classification. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 80-86. ISSN 2637-0883. (Published)

Oudah, Ali A. and Izzeldin, I. Mohd and A., Hameed and Zulkifli, Md. Yusof (2014) Wind Turbines: Novel Control Algorithm in Region II. Journal Electronic Engineering Technology, 91. pp. 742-749. ISSN 1975-0102 (Print); 2093-7423 (Online). (Published)

P. N. F. M., Shamsuddin and Muhamad Arifpin, Mansor and M. S. A., Hadi and N. Z., Abidin and R., Ibrahim (2020) Development of water trash collector. Journal of Advanced Industrial Electronics Research and Applications (JAIERA), 1 (1). pp. 1-5. ISSN 2756-7842. (Published)

Panigrahi, Shrikant and Yuserrie, Zainuddin and Noor Azlinna, Azizan (2014) Linkage of Management Decision to Shareholder's Value: EVA Concept. International Journal of Finance & Banking Studies, 3 (1). pp. 114-125. ISSN 2147-4486. (Published)

Parsia, Yasaman and Sorooshian, Shahryar (2016) Redox Potential, the Main Barrier of Laccase-Mediated Biobleaching of Pulp in Paper Industry. BioTechnology: An Indian Journal, 12 (5). pp. 1-6. ISSN 0974-7435. (Published)

Pathak, Sunil and Jain, N. K. (2017) Critical Review Of Electrochemical Honing: Sustainable And Alternative Gear Finishing Process. Part 2: Effects Of Various Process Parameters On Surface Characteristics And Material Removal Rate. Transactions of the IMF, 95 (5). pp. 241-254. ISSN 0020-2967 (Print); 1745-9192 (Online). (Published)

Pathak, Sunil and Saha, Gobinda C. (2017) Development of Sustainable Cold Spray Coatings and 3D Additive Manufacturing Components for Repair/Manufacturing Applications: A Critical Review. Coatings, 7 (8). pp. 1-27. ISSN 2079-6412. (Published)

Pathak, Sunil and Saha, Gobinda C. and Musfirah, Abdul Hadi and Jain, Neelesh K. (2021) Engineered nanomaterials for aviation industry in COVID-19 context: A time-sensitive review. Coatings, 11 (4). pp. 1-20. ISSN 2079-6412. (Published)

Pinueh, N.S. and Abu, Mohd Yazid and S K M, Saad and N.H, Aris and Sari, E. (2023) Methadone Flexi Dispensing (MFlex) Intelligence System utilizing the Mahalanobis-Taguchi System. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (1). pp. 30-41. ISSN 2636-9575. (Published)

Prasada Rao, A. K. and W. Q., Ain and M. K., Faisal and B. I., Mazni (2018) Undiluted recycling of aluminum scrap alloy using Hume-Rothery’s rule. Metallography, Microstructure, and Analysis, 7 (2). pp. 239-244. ISSN 2192-9262 (Print); 2192-9270 (Online). (Published)

Putri Nur Farhanah, Mohd Shamsuddin and Muhamad Arifpin, Mansor and Roshahliza, M. Ramli and Raja Mariatul Qibtiah, Raja Jaapar (2020) Development of navigation system for unmanned surface vehicle by improving path tracking performance. Journal of Engineering Science and Technology, 15 (2). pp. 1371-1383. ISSN 1823-4690. (Published)

Quazi, M. M. and M., Ishak and Fazal, M. A. and Arslan, A. and Rubaiee, Saeed and Qaban, Abdullah and Aiman, Mohd Halil and Sultan, Tipu and Ali, M. M. and Manladan, S. M. (2020) Current research and development status of dissimilar materials laser welding of titanium and its alloys. Optics & Laser Technology, 126 (106090). ISSN 0030-3992. (Published)

Qutaba, Syed and Asmelash, Mebrahitom and Azmir, Azhari (2023) Investigation on the multiple plies structure of aluminum-lithium alloy and glass fiber composite with respect to deformation failure. Materials Research Express, 10 (016507). pp. 1-17. ISSN 2053-1591. (Published)

R., Rifin and Fang, T. E. and A. F. Z., Abidin and Asrul, Adam and M. A., Majid and A., Zainuddin and S. H., Mohammad and M. H., Harun and Z. I., Rizman (2018) Examwiz: a development and implementation of an android based examination. Journal of Fundamental and Applied Sciences, 10 (6S). pp. 965-976. ISSN 1112-9867. (Published)

Rabiu Muazu, Musa and Isyaku, Hassan and Mohamad Razali, Abdullah and Mohd Nazri, Latiff Azmi and Abdul Majeed, Anwar P. P. and Noor Azuan, Abu Osman (2022) A longitudinal analysis of injury characteristics among elite and amateur tennis players at different tournaments from electronic newspaper reports. Frontiers in Public Health, 10 (835119). pp. 1-14. ISSN 2296-2565. (Published)

Radhiyah, Abd Aziz and Nurul Farahin, Zamrud and Nurrina, Rosli (2018) Comparison on cooling efficiency of cooling pad materials for evaporative cooling system. Journal of Modern Manufacturing Systems and Technology, 1. pp. 61-68. ISSN 2636-9575. (Published)

Radhiyah, Abd Aziz and Rajan, Jose (2017) Charge Storage Capability of Tunnel MnO2 and Alkaline Layered Na-MnO2 as Anode Material for Aqueous Asymmetry Supercapacitor. Journal of Electroanalytical Chemistry, 799. pp. 538-546. ISSN 1572-6657. (Published)

Radhiyah, Abd Aziz and Ramprabhu, Kandasan and Nurrina, Rosli (2018) Development of TiO2 coated activated carbon foam as cooling pad for direct evaporative cooling system. Journal of Modern Manufacturing Systems and Technology, 1. pp. 52-60. ISSN 2636-9575. (Published)

Raja Ariffin, Raja Ghazilla and Zahari, Taha and Salwa Hanim, Abdul-Rashid and Sakundarini, Novita and Gonzales, Julirose (2012) Product Recovery Oriented Approach For Fastener Selection During Conceptual Design. International Journal of Sustainable Design, 2 (1). pp. 64-82. ISSN 1743-8284 (Print); 1743-8292 (Online). (Published)

Raman, Nordin and Yuserrie, Zainuddin and Fuad and Rasid, Mail and Noor Kaziemah, Sariman (2015) Performance Outcomes of Strategic Management Accounting Information Usage in Malaysia: Insights from Electrical and Electronics Companies. Procedia Economics and Finance, 31. pp. 13-25. ISSN 2212-5671. (Published)

Ramaraju, Ramgopal Varma and Rao, G. Venkateswazra (2014) Combined effects of geometric and material non-linearities on one dimensional structural members. International Journal of Engineering Technology And Sciences (IJETS), 1 (1). pp. 1-4. ISSN 2289-697X. (Published)

Ramli, Junid (2011) The Effects of Photoinitiator Addition to the Mechanical and Physical Properties of the Epoxy and Vinyl Ester Fiber Glass Laminated Composites. International Journal of Applied Science and Technology, 1 (3). pp. 74-79. (Published)

Razali, Muhamad Magffierah and Kamarudin, N.H. and M. F. F., Ab Rashid and Ahmad Nasser, Mohd Rose (2019) Recent trend in mixed-model assembly line balancing optimization using soft computing approaches. Engineering Computations, 36 (2). pp. 622-645. ISSN 0264-4401. (Published)

Reddy, Baridula Ravinder and Ramgopal , Varma Ramaraju and Abdullah, Ibrahim and C. K. M., Faizal (2016) Effect of Nano Particle Deposition on Mechanical Properties of Friction Stir Welded Dissimilar Aluminium Alloys by Taguchi Technique. Transactions of the Indian Institute of Metals. (Published)

Rinei, Arifin and Siti Zubaidah, Ismail (2019) Investigation of inventory record accuracy in product-service system. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 93-105. ISSN 2636-9575. (Published)

Ros Azlinawati, Ramli and Nur Zuriati, Zakaria and Ummu Umaira, Abdul Rahman and Nur Basyirah, Ahmad Bakhtiar and Siti Noor Hidayah, Mustapha and Yuen, Mei Lian (2018) Effect of mineral fillers on mechanical, thermal and morphological properties of kenaf recycled polyethylene wood plastic composite. European Journal of Wood and Wood Products, 76 (6). pp. 1737-1743. ISSN 0018-3768 (Print); 1436-736X (Online). (Published)

Ros Azlinawati, Ramli and Yuen, Mei Lian and Noraishah, Mohamad Nor and Nur Iffah Zulaikha, Azman (2019) Synthesis, characterization, and morphology study of coco peat-grafted-poly(acrylic acid)/NPK slow release fertilizer hydrogel. Journal of Polymer Research, 26 (266). pp. 1-6. ISSN 1022-9760. (Published)

Rosli, Danial N. and Rasid, Mohd Azri Hizami (2022) Modal analysis of an 8/6 pole switched reluctance motor core with different materials and assembly method using FEA. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 40-47. ISSN 2637-0883. (Published)

Rosmazi, Rosli and Zamri, Mohamed (2021) Optimization of modified Bouc–Wen model for magnetorheological damper using modified cuckoo search algorithm. Journal of Vibration and Control, 27 (17-18). pp. 1-12. ISSN 1077-5463 (print); 1741-2986 (online). (Published)

Rossi, Passarella and Zahari, Taha (2012) Lightweight Solar Vehicle Impact Analysis Using ABAQUS/EXPLICIT. Computer Engineering and Applications, 1 (2). pp. 85-96. ISSN 2252-4274 (Print); 2252-5459 (Online). (Published)

Rozaidi, Zaharudin and Radhiyah, Abd Aziz (2020) Thermal conductivity and stability studies of cooking and waste cooking oil as a based fluid of TiO2 nanofluid for carbon steel quenching process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 78 (2). pp. 22-33. ISSN 2289-7879. (Published)

Ruhaizin, Sulaiman and Zahari, Taha and Siti Zawiah, Md. Dawal (2013) Application of Anthropometric Dimensions for Estimating Stove Height, Stove Depth and Cooking Task Envelope for Malaysian Elderly Population. Pertanika Journal of Science & Technology (JST), 21 (1). pp. 283-298. ISSN 0128-7680. (Published)

Rusila Zamani, Abd Rashid and Norhasnidawani, Johari and Saiful Amri, Mazlan and Siti Aishah, Abdul Aziz and Nur Azmah, Nordin and Nurhazimah, Nazmi and S. N., Aqida and Mohd Aidy Faizal, Johari (2021) Effects of silica on mechanical and rheological properties of EPDM-based magnetorheological elastomers. Smart Materials and Structures, 30 (10). pp. 1-2. ISSN 0964-1726. (Published)

S., Sharif and A. S., Ramli and A. Y. M., Said and Z., Karim and E. A., Rahim and Amiril Sahab, Abdul Sani (2019) Effect of cutting parameters on tool wear when trochoidal pocket milling Ti6Al4V. International Journal of Integrated Engineering, 11 (4). pp. 159-165. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

S., Sreenath and K., Sudhakar and A. F., Yusop (2021) Sustainability at airports: Technologies and best practices from ASEAN countries. Journal of Environmental Management, 299 (113639). pp. 1-15. ISSN 0301-4797. (Published)

S., Sreenath and K., Sudhakar and A. F., Yusop and Solomin, Evgeny and I. M., Kirpichnikova (2020) Solar PV energy system in Malaysian airport: Glare analysis, general design and performance assessment. Energy Reports, 6. pp. 698-712. ISSN 2352-4847. (Published)

S. H., Mohamed Noor and K., Syam and Abdul Aziz, Jaafar and M. F., Mohamad Sharif and Mohd Riduwan, Ghazali and Wan Ismail, Ibrahim and M. F., Atan (2016) Development of a Working Hovercraft Model. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

S. K., Lim and Azmi, W. H. and A. R., Yusoff (2016) Investigation of Thermal Conductivity and Viscosity of Al2O3/Water-Ethylene Gylcol Mixture Nanocoolant for Cooling Channel of Hot-press Forming Die Application. International Communications in Heat and Mass Transfer, 78. pp. 182-189. ISSN 0735-1933. (Published)

S. K. M., Saad and S. N. A. M., Zaini and M. Y., Abu (2021) Application of Mahalanobis-Taguchi system in ascending case of methadone flexi dispensing (MFlex) program. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 117-128. ISSN 2636-9575. (Published)

S. K. M., Saad and S. N. A. M., Zaini and M. Y., Abu (2021) Application of Mahalanobis-Taguchi system in descending case of methadone flexi dispensing (MFlex) program. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 84-97. ISSN 2636-9575. (Published)

S. M. H., Fahami and Faiz, Mohd Turan (2022) Directional Control of Wheel Syncronization in Vehicle Steer by Wire System. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 96-103. ISSN 2637-0883. (Published)

S. N., Aqida and Brabazon, Dermot and Naher, Sumsun and Kovacs, Z. and Browne, D. (2010) Laser Micro-Processing Of Amorphous And Partially Crystalline cu45Zr48Al7 Alloy. Applied Physics A: Materials Science and Processing, 101. pp. 357-360. (Published)

S. N. A. M., Zaini and C. W., Zheng and Mohd Yazid, Abu (2020) Costing structure improvement using activity based costing in palm oil plantation of Malaysia. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 95-109. ISSN 2636-9575. (Published)

S.K., Lim and M. F., Zamri and Ahmad Razlan, Yusoff (2022) Structure integrity analysis on nickel–diamond blade in dicing of hard-brittle ceramic die. Procedia CIRP, 108. pp. 465-469. ISSN 2212-8271 (Online). (Published)

Saadiah, Mohd Ali and Singh, Pramod Kumar and Samsudin, Ahmad Salihin (2021) Effect of C3 H4 O3 on band gap narrowing of proton conductive hybrid polymer electrolyte. Macromolecular Symposia, 397 (1). pp. 1-2. ISSN 1521-3900. (Published)

Sahu, Alok K. and Sudhakar, K. and Sarviya, R. M. (2019) Influence of U.V light on the thermal properties of HDPE/Carbon black composites. Case Studies in Thermal Engineering, 15 (100534). pp. 1-7. ISSN 2214-157X. (Published)

Saiful Anwar, Che Ghani and Siti Rohaida, Mohamed and Munirah, Sha’ban and W. S., Wan Harun and Nor Aida Zuraimi, Md Noar (2020) Experimental investigation of biological and mechanical properties of CoCrMo based selective laser melted metamaterials for bone implant manufacturing. Procedia CIRP, 89. pp. 79-91. ISSN 2212-8271. (Published)

Sakib, Md. Nazmus and Iqbal, AKM Asif (2021) Epoxy based nanocomposite material for automotive application- a short review. International Journal of Automotive and Mechanical Engineering, 18 (3). pp. 9127-9140. ISSN 2229-8649. (Published)

Sakinah, Hisham and Kadirgama, Kumaran and Alotaibi, Jasem Ghanem and Alajmi, Ayedh Eid and Ramasamy, Devarajan and Norazlianie, Sazali and Mohd Kamal, Kamarulzaman and Yusaf, T. and Samylingam, L. and Aslfattahi, Navid and Kok, Chee Kuang (2024) Enhancing stability and tribological applications using hybrid nanocellulose-copper (II) oxide (CNC-CuO) nanolubricant: An approach towards environmental sustainability. Tribology International, 194 (109506). pp. 1-15. ISSN 0301-679X. (Published)

Sakundarini, Novita and Zahari, Taha and Salwa Hanim, Abdul-Rashid and Raja Ariffin, Raja Ghazilla and Gonzales, Julirose (2013) Multi-Objective Optimization For High Recyclability Material Selection Using Genetic Algorithm. The International Journal of Advanced Manufacturing Technology, 68 (5-8). pp. 1441-1451. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Salve, Aniket and Kulkarni, R. R. and Mache, Ashok (2016) A Review: Fiber Metal Laminates (FML’s) - Manufacturing, Test Methods and Numerical Modeling. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 71-84. ISSN 2289-697X. (Published)

Samsiah, Suaily and Siti Zubaidah, Ismail (2018) Development of Product Service System Modelling in SMED: The Case of Inventory Control. Journal of Modern Manufacturing Systems and Technology (JMMST), 1. pp. 94-106. ISSN 2636-9575. (Published)

Saptaji, Kushendarsyah (2016) Micro-Milling of Thin Mould for Continuous Productions of Polymer Microfluidic Devices. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14225-14230. ISSN 1819-6608. (Published)

Sarifudin, M. S. and Mansor, M. A. (2019) Simplification of wastes for a warehouse using Boolean logic: A conceptual paper. Journal of Engineering Science and Technology, 14 (5). 2464 -2474. ISSN 1823-4690. (Published)

Sarifudin, M. S. and Mansor, M. A. and Safiei, W. (2019) Waste simplification for warehouse using Boolean logic. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 44-52. ISSN 2289-697X. (Published)

Seng, Bunrith and Risky Ayu, Kristanti and Hadibarata, Tony and Hirayama, Kimiaki and Hirayama, Keiko Katayama and Kaneko, Hidehiro (2016) Mathematical Model of Organic Substrate Degradation in Solid Waste Windrow Composting. Bioprocess and Biosystems Engineering, 39 (1). pp. 81-94. ISSN 1615-7591 (print); 1615-7605 (online). (Published)

Shahrom, Mohd Syahmi and A. R., Yusoff (2017) Cyclic extrusion compression back pressure technique for hot forging process in direct recycling of aluminium 6061 machining chip. Journal of Manufacturing Processes, 29. pp. 1-9. ISSN 1526-6125. (Published)

Sharma, Korada Viswanatha and B., Vijaya Lakshmi and T., Subrahmanyam and V., Dharma Rao (2011) Turbulent Film Condensation of Pure Vapors Flowing Normal to a Horizontal Condenser Tube - Constant Heat Flux at the Tube Wall. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul. pp. 455-470. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Shiave, Ali Imran and Mohan, Ram and Samykano, M. (2021) Morphological and growth characteristics of template-assisted electrodeposited cobalt nanowires: Effect of synthesis current density and temperature. MRS Advances, 6 (26). 659 -663. ISSN 2059-8521. (Published)

Shin, Teh Muy and Asrul, Adam and Amar Faiz, Zainal Abidin (2019) A comparative study of PSO, GSA and SCA in parameters optimization of surface grinding process. Bulletin of Electrical Engineering and Informatics, 8 (3). pp. 1117-1127. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Sin-Ye, Phoon and Hwa, Jen Yap and Zahari, Taha and Yun, Suen Pai (2017) Interactive Solution Approach For Loop Layout Problem Using Virtual Reality Technology. The International Journal of Advanced Manufacturing Technology, 89 (5-8). pp. 2375-2385. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Singh, Rupinder (2012) Comparison of Polyjet Printing and Silicon Moulding as Rapid Plastic Moulding Solution. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 777-784. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Singh, Rupinder and Singh, Rajinder (2012) Effect of Workpiece Volume on Shell Wall Thickness Reduction in Rapid Casting of Aluminum using Three-Dimensional Printing. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 680-691. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Singh, Rupinder and Singh, Gurchetan and Singh, Jaskaran and Kumar, Ranvijay and M. M., Rahman and Ramakrishna, Seeram (2019) Thermomechanical investigations of PEKK-HAp-CS composites. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233 (11). pp. 1196-1203. ISSN 0954-4119. (Published)

Siti Aishah, Wahid and Izwan, Ismail (2020) Optimization of Magneto-Rheological Fluids on the volume fraction and viscosity for MR damper application. Southeast Asian Journal of Technology and Science, 1 (1). pp. 1-6. (Published)

Siti Faqihah, Roduan and Juyana, A. Wahab and Mohd Arif Anuar, Mohd Salleh and Nurul Aida Husna, Mohd Mahayuddin and Aiman, Mohd Halil and M., Ishak (2020) Effect of LST parameter on surface morphology of modified copper substrates. Jurnal Tribologi, 26. pp. 84-91. ISSN 2289-7232. (Published)

Siti Nur Athirah, Ahmad Latfi and Nur Najmiyah, Jaafar (2022) An investigation of travel time pattern of T224 RapidKL bus using AVL data. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (1). pp. 66-72. ISSN 2636-9575. (Published)

Siti Nur Sakinah, Jamaludin and Shah Nor, Basri and Hussain, Ahmad and Al-Othmany, Dheya Shujaa and F., Mustapha and Nuruzzaman, D. M. (2014) Three-Dimensional Finite Element Modeling of Thermomechanical Problems in Functionally Graded Hydroxyapatite/Titanium Plate. Mathematical Problems in Engineering, 2014. pp. 1-20. ISSN 1024-123X (print); 1563-5147 (online). (Published)

Siti Rabiatull Aisha, Idris and Ourdjini, Ali and Azmah Hanim, Mohamad Ariff and Saliza Azlina, Osman (2013) Effect of Reflow Profile on Intermetallic Compound Formation. IOP Conference Series: Materials Science and Engineering, 46. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Siti Sarah, Abdul Manan and Muhammed Nafis, Osman Zahid (2023) A parametric study of insertion and retention forces in cantilever hook. Journal of Mechanical Engineering and Sciences (JMES), 17 (1). 9360 -9369. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Soffarina M., Soffie and Izwan, Ismail and Nurain, Mutalib and Syarifah N., Aqida (2020) The morphological and surface roughness of magnetorheological polished AISI 6010 surface. Jurnal Tribologi, 24. pp. 80-99. ISSN 2289-7232. (Published)

Sri Nur Areena, Mohd Zaini and Abu, Mohd Yazid (2019) A Review on Time-Driven Activity-Based Costing System in Various Sectors. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 15-22. ISSN 2636-9575. (Published)

Sri Nur Areena, Mohd Zaini and Filzah Lina, Mohd Safeiee and Ahmad Shahrizan, Abdul Ghani and Nur Najmiyah, Jaafar and Mohd Yazid, Abu (2023) Integration of Mahalanobis-Taguchi System and Time-Driven Activity-Based Costing in a Production Environment. Applied Sciences, 13 (4). pp. 1-15. ISSN 2076-3417. (Published)

Sri Nur Areena, Mohd Zaini and Mohd Yazid, Abu (2022) Development A New Costing Structure In Product And Service Operation Using Time Driven Activity based Costing. Journal of Technology and Operations Management, 17 (1). pp. 11-26. ISSN 2590-4175 (Online). (Published)

Sri Nur Areena, Mohd Zaini and Mohd Yazid, Abu (2023) Implementing time-driven activity-based costing for unused capacity measurement in local university. Sustainability, 15 (4). pp. 1-19. ISSN 2071-1050. (Published)

Subhaa, R. and Jawahar, N. and Ponnambalam, S. G. (2019) An improved design for cellular manufacturing system associating scheduling decisions. Sadhana, 44 (7). pp. 1-23. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Sudhakar, K. and Winderl, Maximilian and Priya, S. Shanmuga (2019) Net-zero building designs in hot and humid climates: A state-of-art. Case Studies in Thermal Engineering, 13. pp. 1-16. ISSN 2214-157X. (Published)

Sugoro Bhakti , Sutono and Salwa Hanim, Abdul-Rashid and Zahari, Taha (2017) Integration of Grey-Based Taguchi Method and Principal Component Analysis for Multi-Response Decision-Making in Kansei Engineering. European Journal of Industrial Engineering, 11 (2). pp. 205-227. ISSN 1751-5254 (Print); 1751-5262 (Online). (Published)

Sundarajoo, Suresh and Ahmad Shahrizan, Abdul Ghani (2018) Improvement of Auto-Tracking Mobile Robot based on HSI Color Model. Indonesian Journal of Electrical Engineering and Computer Science, 12 (3). pp. 1349-1357. ISSN 2502-4752. (Published)

Suparmaniam, Madan Varmma and A. R., Yusoff (2019) Suppression of Chatter in High Speed Milling Machine Using Spindle Speed Variation Method with Acoustic Feedback PID Controller. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 21-26. ISSN 2637-0883. (Published)

Sutikno, Juwari P. and Azizah, Z. and Renanto, Handogo and Riza Aris, Hikmadiyar and Anwaruddin, Hisyam (2019) Inverted decoupling 2DoF internal model control for mimo processes. International Journal of Technology, 10 (3). pp. 502-511. ISSN 2086-9614. (Published)

Syafiq Qhushairy, Syamsul Amri and Ahmad Shahrizan, Abdul Ghani and Mohd Aiman Syahmi, Kamarul Baharin and Mohd Yazid, Abu and Fusaomi, Nagata (2023) Improving images in turbid water through enhanced color correction and particle swarm-intelligence fusion (CCPF). Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 18-35. ISSN 2637-0883. (Published)

Syahrul Ramadhan, A. K. A. and Jasri, Mohamad and Bazli, M. A. (2020) Determining dominant process parameters in polyester yarn winding. Journal of Industrial and Modern Manufacturing, 1 (2). pp. 12-17. ISSN 2716-5965. (Published)

Syazwan Izharuddin, Mohamad Sabri and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Wan Sharuzi, Wan Harun and K., Kadirgama and D., Ramasamy (2023) Investigation on water quality for farmed aquatic species by IoT monitoring system. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 317-327. ISSN 2462-1943. (Published)

Syed Radzi, Rahamaddulla and Zulkiflle, Leman and B. T. Hang Tuah, Baharudin and Siti Azfanizam, Ahmad (2021) Conceptualizing smart manufacturing readiness-maturity model for small and medium enterprise (SME) in Malaysia. Sustainability, 13 (17). pp. 1-18. ISSN 2071-1050. (Published)

Syh Kai, Lim and Wan Hamzah, Azmi and Ahmad Shahir, Jamaludin and Ahmad Razlan, Yusoff (2022) Characteristics of Hybrid Nanolubricants for MQL Cooling lubrication machining application. Lubricants, 10 (350). pp. 1-19. ISSN 2075-4442 (Online). (Published)

Tahar, M. S. M. and Rosli, Nurrina (2022) Simulation study of cooling system for photovoltaic panel using ansys. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 26-33. ISSN 2636-9575. (Published)

Talal, Yusaf and Louis, Fernandes and Abd Rahim, Abu Talib and Yazan S. M., Altarazi and Waleed, Alrefae and Kadirgama, Kumaran and Ramasamy, Devarajan and Jayasuriya, Aruna and Brown, Gordon and Rizalman, Mamat and Hayder, Al Dhahad and Benedict, F. and Mohamd, Laimon (2022) Sustainable aviation—hydrogen is the future. Sustainability (Switzerland), 14 (1). pp. 1-17. ISSN 2071-1050. (Published)

Talu, Stefan and Kulesza, Slawomir and Bramowicz, Miroslaw and Pathak, Sunil and Jain, N. K. (2019) Multiscale surface texture and fractal analysis of straight bevel gears finished by PECH and PECF process. Materials and Manufacturing Processes, 34 (16). pp. 1882-1887. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

Tan, Chee Wang and Amiril Sahab, Abdul Sani and Zubaidah, Zamri (2023) Parametric investigations of drying callophyllum inophyllum fruit for the oil extraction process. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 46-50. ISSN 2637-0883. (Published)

Tan, Eijyne and Rishwaraj, G. and Ponnambalam, S. G. (2020) Development of a task-oriented, auction-based task allocation framework for a heterogeneous multirobot system. Sadhana, 45 (1). pp. 1-13. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Tan, Jun Qi and Mohd Yazid, Abu (2018) Performance evaluation of wire electrical discharge machining on Titanium Alloy. Journal of Modern Manufacturing Systems and Technology, 1. pp. 27-38. ISSN 2636-9575. (Published)

Tanushan, S. and Noraini, Mohd Razali (2021) An investigation into lean practices and their impact on sustainability performance in the latex glove manufacturing industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (2). pp. 15-21. ISSN 2636-9575. (Published)

Tariq, Syed Qutoba and Asmelash, Mebrahitom and Saptaji, Kushendarsyah and Azmir, Azhari (2022) A review on peening processes and its effect on surfaces. The International Journal of Advanced Manufacturing Technology. pp. 4233-4270. ISSN 0268-3768 (Printed), 1433-3015 (online). (Published)

Teo, Jia Chern and Mohd Khairuddin, Ismail and Mohd Razman, Mohd Azraai and Anwar, P. P. Abdul Majeed and Mohd Isa, Wan Hasbullah (2022) Automated detection of knee cartilage region in X-ray image. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 104-109. ISSN 2637-0883. (Published)

Urmi, W. T. and M. M., Rahman and Safiei, W. and Kadirgama, K. and Maleque, M. A. (2022) Effects of minimum quantity lubrication technique in different machining. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). 135 -159. ISSN 2289-7879. (Published)

Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Kadirgama, Kumaran and Zetty Akhtar, Abd Malek and Wahaizad, Safiei (2022) A comprehensive review on thermal conductivity and viscosity of nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 91 (2). pp. 15-40. ISSN 2289-7879. (Published)

Varma, Ramaraju Ramgopal and Abdullah, Ibrahim (2013) Instrumentation to Measure the Heat Transfer Coefficients in an Automobile Radiator. Journal Of Innovation in Electronics and Communication, 3 (2). pp. 24-27. ISSN 2240-9946. (Published)

Varma, Ramaraju Ramgopal and Abdullah, Ibrahim and Reddy, Baridula Ravinder (2014) Evaluating the Strength of the Friction Stir Welded Joints at Various Rotational Speeds. Applied Mechanics and Materials, 446 - . pp. 312-315. ISSN 1662-7482. (Published)

VijayaKumar, Shamala Devi and Junaidi, Zakaria and Norida, Ridzuan (2021) Molecular dynamics approach on intermolecular interaction between n-icosane and gemini surfactant assisted nanoparticles. Petroleum Research. pp. 1-7. ISSN 2096-2495. (In Press / Online First) (In Press / Online First)

Vinayak, Akhil and Muhammad Aizzat, Zakaria and Baarath, K. and Peeie, Mohamad Heerwan and Muhammad Izhar, Ishak (2023) A Novel Triangular-Based Estimation Technique for Bezier Curve Control Points Generation on Autonomous Vehicle Path Planning at the Roundabout Intersection. Journal of Intelligent and Robotic Systems: Theory and Applications, 109 (4). pp. 1-18. ISSN 1573-0409. (Published)

Vitasari, Prima and Muhammad Nubli, Abdul Wahab and Herawan, Tutut and Ahmad, Othman and Suriya Kumar, Sinnadurai (2011) Re-test of State Trait Anxiety Inventory (STAI) among engineering students in Malaysia: Reliability and validity tests. Procedia Social and Behavioral Sciences, 15. pp. 3843-3848. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Vitasari, Prima and Muhammad Nubli, Abdul Wahab and Herawan, Tutut and Ahmad, Othman and Suriya Kumar, Sinnadurai (2011) Validating the instrument of study anxiety sources using factor analysis. Procedia Social and Behavioral Sciences, 15. pp. 3831-3836. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Vitasari, Prima and Muhammad Nubli, Abdul Wahab and Herawan, Tutut and Ahmad, Othman and Suriya Kumar, Sinnadurai (2011) A pilot study of pre-post anxiety treatment to improve academic performance for engineering students. Procedia Social and Behavioral Sciences, 15. pp. 3826-3830. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Vitasari, Prima and Muhammad Nubli, Abdul Wahab and Herawan, Tutut and Suriya Kumar, Sinnadurai (2011) Psychophysiological treatment in reduced anxiety with biofeedback training for university students. Procedia - Social and Behavioral Sciences, 30. pp. 629-633. ISSN 1877-0428(print); 1877-0428(online). (Published)

Vitasari, Prima and Muhammad Nubli, Abdul Wahab and Herawan, Tutut and Suriya Kumar, Sinnadurai (2011) Representation of social anxiety among engineering students. Procedia - Social and Behavioral Sciences, 30. pp. 620-624. ISSN 1877-0428, ESSN: 1877-0428. (Published)

Vitasari, Prima and Muhammad Nubli, Abdul Wahab and Herawan, Tutut and Suriya Kumar, Sinnadurai and Ahmad, Othman and Muhamad Ghani, Awang (2011) Assessing of physiological arousal and cognitive anxiety toward academic performance: The application of catastrophe model. Procedia - Social and Behavioral Sciences, 30. pp. 615-619. ISSN 1877-0428, ESSN: 1877-0428. (Published)

Vivekanandan, Panneerselvam and Faiz, Mohd Turan (2019) Optimization of process parameters of injection moldings for plastic pallets manufacturing industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 75-83. ISSN 2636-9575. (Published)

Vorathin, E. and Z. M., Hafizi (2020) Bandwidth modulation and centre wavelength shift of a single FBG for simultaneous water level and temperature sensing. Measurement, 163 (107955). pp. 1-8. ISSN 0263-2241. (Published)

W.J., Kh’ng and Wan Asma, Ibrahim and Zulkafli, Hassan and Izirwan, Izhab (2022) Catalytic cracking of castor oil via microwave assisted method. Energy Reports, 8 (15). pp. 11-18. ISSN 2352-4847. (Published)

Wajiha Tasnim, Urmi and Rahman, Md Mustafizur and Wahaizad, Safiei and Kumaran, Kadirgama and Md Abdul, Maleque (2022) Effects of minimum quantity lubrication technique in different machining processes - a comprehensive review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). pp. 135-159. ISSN 2289-7879. (Published)

Wan Hasbullah, Mohd Isa and Hunt, Andres and HosseinNia, S. Hassan (2019) Sensing and self-sensing actuation methods for ionic polymer–metal composite (IPMC) : a review. Sensors, 19 (18). ISSN 1424-8220. (Published)

Wan Qurratul Ain, Wan Mohamad and M. K., Faisal and M. K., Talari and W., Darham and M. M., Ratnam and Y., Kwon and N. J., Kim and A. K., Prasada Rao (2016) Effect of Mo on the High-Temperature Creep Resistance and Machinability of a Recycled Al-Alloy with High Iron Impurity. Journal of Materials Engineering and Performance, 25 (10). pp. 4310-4316. ISSN 1059-9495. (Published)

Wan Zateel Aqmaer, Wan Ab Halim and Ramli, Junid and Norazlianie, Sazali and Siregar, Januar Parlaungan and Jeefferie, Abd Razak and Deni Fajar Fitriyana, . and Cionita, Tezara and Jamiluddin, Jaafar (2024) Enhancement of flexural modulus and strength of epoxy nanocomposites with the inclusion of functionalized GNPs using Tween 80. Journal of Engineering and Applied Sciences, 71 (69). pp. 1-14. ISSN 1816-949X. (Published)

Wei, Jie Woon and Siti Zubaidah, Ismail (2018) Development of Product Resource Inventory Control Using Forecasting In ‘SMED’. Journal of Modern Manufacturing Systems and Technology, 1. pp. 82-93. ISSN 2636-9575. (Published)

Widia, Mirta and Siti Zawiah, M. D. and Nukman, Yusof (2019) Maximum acceptable frequency of lift for combined manual material handling task in Malaysia. PLoS ONE, 14 (5). pp. 1-13. ISSN 1932-6203. (Published)

Wong, Sze Yin and Radhiyah, Abd Aziz (2021) Stability studies of hybrid TiO2 based nanofluids. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 37-45. ISSN 2636-9575. (Published)

Yip, Zi Ying and Mohd Khairuddin, Ismail and Mohd Isa, Wan Hasbullah and Abdul Majeed, Anwar P. P. and Abdullah, Muhammad Amirul and Mohd Razman, Mohd Azraai (2022) Badminton smashing recognition through video performance by using deep learning. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 70-79. ISSN 2637-0883. (Published)

Yusof, Hashim and Zahari, Taha (2014) The Impact of Ergonomics Driving Risk Factors on Musculoskeletal Health of Malaysian Express Bus Drivers. International Journal of Contemporary Business Management (IJCBM), 1 (1). pp. 20-29. (Published)

Z., Zulkfli and Fatchurrohman, Nanang (2021) Advancement in friction stir processing on magnesium alloys. IOP Conference Series: Materials Science and Engineering, 1092 (012006). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Z., Zulkifli and N. H., Abdul Halim and Z. H., Solihin and J., Saedon and A. A., Ahmad and A. H., Abdullah and N., Abdul Raof and Musfirah, Abdul Hadi (2023) The analysis of grid independence study in continuous disperse of MQL delivery system. Journal of Mechanical Engineering and Sciences (JMES), 17 (3). 9586 -9596. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zahari, Taha and Jessnor Arif, Mat Jizat (2012) A Comparison of Two Approaches for Collision Avoidance of an Automated Guided Vehicle Using Monocular Vision. Applied Mechanics and Materials, 145. pp. 547-551. ISSN 1662-7482. (Published)

Zahari, Taha and Aliq, Zuhdi and Tahriri, Farzad (2011) Job sequencing and layout optimization in virtual production line. Journal of Quality, 18 (4). pp. 351-374. ISSN 1022-0690. (Published)

Zahari, Taha and Anwar, P. P. A. Majeed and Mohd Yashim, Wong Paul Tze and Abdul Ghaffar, Abdul Rahman (2015) Preliminary Investigation on the Development of a Lower Extremity Exoskeleton for Gait Rehabilitation: A Clinical Consideration. Journal of Medical and Bioengineering, 4 (1). pp. 1-6. ISSN 2301-3796. (Published)

Zahari, Taha and Anwar, P. P. A. Majeed and Mohd Yashim, Wong Paul Tze and Ali, Mohammed A. H. and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman (2016) Modelling and Control of an Upper Extremity Exoskeleton for Rehabilitation. IOP Conference Series: Materials Science and Engineering, 114 (012134). pp. 1-8. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Zahari, Taha and Chei, Ming Lee and Nizam, U. Ahamed and Saju, Joseph and S. Faris, S. Omar (2016) Performance Analysis in Strength Training: An Innovative Instrumentation. Procedia Engineering, 147. pp. 455-460. ISSN 1877-7058. (Published)

Zahari, Taha and Haque, Mainul and Musa, Rabiu Muazu and Mohamad Razali, Abdullah and Maliki, Ahmad Bisyri Husin Musawi and Norzulaika, Alias and Norlaila Azura, Kosni (2017) Intelligent Prediction of Suitable Physical Characteristics Toward Archery Performance Using Multivariate Techniques. Journal of Global Pharma Technology, 9 (7). pp. 44-52. ISSN 0975 -8542. (Published)

Zahari, Taha and Jessnor, Arif Mat-Jizat and Syed Faris, Syed Omar and Suwarganda, Edin (2016) Correlation between Archer's Hands Movement While Shooting and its Score. Procedia Engineering, 147. pp. 145-150. ISSN 1877-7058. (Published)

Zahari, Taha and Kun, Liu and Wang, Hongrui and Xiao, Jinzhuang (2015) Analysis of Human Standing Balance by Largest Lyapunov Exponent. Computational Intelligence and Neuroscience, 2015. pp. 1-10. ISSN 1687-5265 (print); 1687-5273 (online). (Published)

Zahari, Taha and Lum, Shirley and Mohd Azraai, Mohd Razman (2017) A Review on Non-Invasive Hypertension Monitoring System by using Photoplethysmography Method. Movement, Health & Exercise (MoHE), 6 (1). pp. 47-57. ISSN 2231-9409. (Published)

Zahari, Taha and Mohammad Syawaludin, Syafiq Hassan and Hwa, Jen Yap and Wee, Kian Yeo (2016) Preliminary Investigation of an Innovative Digital Motion Analysis Device for Badminton Athlete Performance Evaluation. Procedia Engineering, 147. pp. 461-465. ISSN 1877-7058. (Published)

Zahari, Taha and Mohd Azraai, Mohd Razman and Faeiz Azizi, Adnan and Anwar, P. P. A. Majeed and Rabiu Muazu, Musa (2017) The Development of the Putt.It.In Monitoring Device and the Establishment of Its Reliability: A Solution for Putting-In Analysis in Golf. Movement, Health & Exercise (MoHE), 6 (1). pp. 31-38. ISSN 2231-9409. (Published)

Zahari, Taha and Mohd Hasnun Ariff, Hassan (2016) Parametric Analysis of the Influence of Elastomeric Foam on the Head Response During Soccer Heading Manoeuvre. Procedia Engineering, 147. pp. 139-144. ISSN 1877-7058. (Published)

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Iskandar, Hasanuddin (2015) Analytical Modelling of Soccer Heading. Sadhana, 40 (5). pp. 1567-1578. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Zahari, Taha and Muhammad Syukur, Norman and Syed Faris, Syed Omar and Edin, Suwarganda (2016) A Finite Element Analysis of a Human Foot Model to Simulate Neutral Standing on Ground. Procedia Engineering, 147. pp. 240-245. ISSN 1877-7058. (Published)

Zahari, Taha and Rabiu Muazu, Musa and Anwar, P. P. Abdul Majeed and Muhammad Muaz, Alim and Mohamad Razali, Abdullah (2018) The Identification of High Potential Archers Based on Fitness and Motor Ability Variables: A Support Vector Machine Approach. Human Movement Science, 57. pp. 184-193. ISSN 0167-9457. (Published)

Zahari, Taha and Rabiu Muazu, Musa and Mohamad Razali, Abdullah and Mohd Azrai, Mohd Razman and Chei, Ming Lee and Faeiz Azizi, Adnan and Muhammad Amirul, Abdullah and Haque, Mainul (2017) The Application of Inertial Measurement Units and Wearable Sensors to Measure Selected Physiological Indicators in Archery. Asian Journal of Pharmaceutical Research and Health Care, 9 (2). pp. 85-92. ISSN 2250-1460 . (Published)

Zahari, Taha and Raja Ariffin, Raja Ghazilla and Sumiani, Yusoff and Salwa Hanim, Abdul-Rashid (2014) Development of Decision Support System for Fastener Selection in Product Recovery Oriented Design. The International Journal of Advanced Manufacturing Technology, 70 (5-8). pp. 1403-1413. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Zahari, Taha and Rossi, Passarella and Sugiyono, . and Nasrudin, Abd Rahim and Jamali, M. Sah and Aznijar, Ahmad Yazid (2011) CFD analysis for merdeka 2 solar vehicle. Advanced Science Letters, 4 (8-10). pp. 2807-2811. ISSN 1936-6612. (Published)

Zahari, Taha and Sakundarini, Novita and Salwa Hanim, Abdul-Rashid and Raja Ariffin, Raja Ghazilla (2014) Incorporation of High Recyclability Material Selection in Computer Aided Design. Materials and Design, 56. pp. 740-749. ISSN 0261-3069. (Published)

Zahari, Taha and Samrat, Nahidul Hoque and Norhafizan, Ahmad and Choudhury, Ahmed Imtiaz (2014) Modeling, Control, and Simulation of Battery Storage Photovoltaic-Wave Energy Hybrid Renewable Power Generation Systems for Island Electrification in Malaysia. The Scientific World Journal, 2014. pp. 1-21. ISSN 2356-6140 (print); 1537-744X (online). (Published)

Zahari, Taha and Sarkawt, Rostam (2012) A hybrid fuzzy AHP-PROMETHEE decision support system for machine tool selection in flexible manufacturing cell. Journal of Intelligent Manufacturing, 23 (6). pp. 2137-2149. ISSN 1572-8145. (Published)

Zahari, Taha and Sugiyono, . and T. M. Y. S., Tuan Ya and Sawada, Tatsuo (2011) Numerical investigation on the performance of Wells turbine with non-uniform tip clearance for wave energy conversion. Applied Ocean Research, 33 (4). pp. 33-4. ISSN 0141-1187. (Published)

Zahari, Taha and Tai, Vin Cent and See, Phen Chiak (2011) Design and manufacture of a miniature UAV using 3D rapid prototyping. Advanced Materials Research, 308-310. pp. 1426-1435. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zahari, Taha and Teuku, Firsa and Raja Ariffin, Raja Ghazilla (2014) AVL Boost Simulation of Engine Performance and Emission for Compressed Natural Gas Direct Injection Engine. Journal of Energy & Environment, 6 (1). pp. 1-3. ISSN 1985-7462. (Published)

Zaimi, M. and Azran, M. N. and Kasim, M. S. and Kamal, M. R. M. and Othman, I. S. and Lau, K. T. and Widodo, T. D. and Azizul Helmi, Sofian (2019) Effect of heat treatment on the tribological performance of electroless quaternary nickel alloy. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5637 -5652. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zainal Ariffin, Selamat and Nor Bahiyah, Baba and Mohd, Alias and A. R., Yusoff and M. M., Rahman (2016) Effect of Coolant Nozzle Sizes on Turning Aluminum Alloy AL319. Indian Journal of Science and Technology, 9 (9). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Zainal Ariffin, Selamat and Nor Bahiyah, Baba and Mohd, Alias and Nornajmiah, Mohamad and A. R., Yusoff and M. M., Rahman (2016) Effect of CNC Lathe Machining Performance by Varying Coolant Nozzle Diameter. Indian Journal of Science and Technology, 9 (9). pp. 1-4. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Zainal Ariffin, Selamat and Razali, M. and A. R., Yusoff and M. M., Rahman (2014) Investigation on Effect of Cutting Fluid Pressure Toward Machinability Using Stainless Steel 304 With Coated Cemented. Australian Journal of Basic and Applied Sciences, 8 (4 (Special)). pp. 695-699. ISSN 1991-8178. (Published)

Zaitun, Zainal Abidin and Siti Zubaidah, Ismail (2020) Analysis of product-service solution inventory record for Malaysian palm oil argibusiness. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 1-6. ISSN 2636-9575. (Published)

Zamzuri, Hamedon and Mori, Ken-ichiro and Abe, Yohei and Watanabe, Saharu (2014) Prevention of Wrinkling in Shrink Flanging of Ultra-High Strength Steel Sheets Using Gradually Contacting Punch. Journal of the Japan Society for Technology of Plasticity, 55 (639). pp. 341-345. (Published)

Zamzuri, Hamedon and A. R., Yusoff and Azmir, Azhari and Abe, Yohei and Mori, Ken-ichiro (2016) Design of Hollow Section of High Strength Steel Sheets Join by Hemming Process for Energy Absorbtion Application. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3640-3643. ISSN 1819-6608. (Published)

Zamzuri, Hamedon and Mon, Thet Thet and S., Sharif and Venkatesh, V. C. and A. R. M., Masri and Sue-Rynley, Anak Emley (2011) Performance of nitrogen gas as a coolant in machining of titanium. Advanced Materials Research, 264-265. pp. 962-966. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zhao, Yue and Mishra, Puranjan and Han, Fengrong and Liu, Xinni and Shen, Zhou (2019) Surface micro-alcoholysis treatment : a novel approach towards froth flotation based separation for binary mixtures of polyethylene terephthalate and polyvinyl chloride. Journal of Cleaner Production, 232. pp. 848-857. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Zulayti, Zakaria and Kean Hua, Ang and Mohamad Pirdaus, Yusoh and Junaidah, Yusof and Norena, Abdul Karim Zamri and Mohd Fadzil Ali, Ahmad (2023) Critical Evaluation Psychology on Vagrancy Intervention Programs: The Case in Malaysia. Journal for Re Attach Therapy and Developmental Diversities, 6 (10). pp. 1-26. ISSN 2589-7799. (Published)

Zulhelmi, Ismail (2019) Green reduction of graphene oxide by plant extracts: A short review. Ceramics International, 45 (18 part A). pp. 23857-23868. ISSN 0272-8842. (Published)

Zulhelmi, Ismail (2019) Layer-layer assembly of water-based graphene for facile fabrication of sensitive strain gauges on paper. Cellulose, 26 (3). pp. 1417-1429. ISSN 1572-882X. (Published)

Zulhelmi, Ismail and Abdullah, Abu Hannifa and Zainal Abidin, Anis Sakinah and Kamal, Yusoh (2017) Production of functional graphene by kitchen mixer: mechanism and metric development for in situ measurement of sheet size. Journal of Nanostructure in Chemistry, 7 (3). pp. 231-242. ISSN 2008-9244 (Print); 2193-8865 (Online). (Published)

Zulhelmi, Ismail and Abu Hannifa, Abdullah and Anis Sakinah, Zainal Abidin and Kamal, Yusoh (2017) Application of graphene from exfoliation in kitchen mixer allows mechanical reinforcement of PVA/graphene film. Applied Nanoscience, 7 (6). pp. 317-324. ISSN 2190-5509 (Print); 2190-5517 (Online). (Published)

Zulhelmi, Ismail and Nurul Farhana, Abu Kassim and Abu Hannifa, Abdullah and Anis Sakinah, Zainal Abidin and Fadwa Sameha, Ismail and Kamal, Yusoh (2017) Black Tea Assisted Exfoliation Using a Kitchen Mixer Allowing One-Step Production of Graphene. Materials Research Express, 4 (7). ISSN 2053-1591. (Published)

Zulkefle, Mohamad Hafizie and Abdul Ghani, A. S. (2022) Investigation of rectangular shape object detection and classification using python. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 32-39. ISSN 2637-0883. (Published)

Zurghiba, Hizanorhuda and Kadirgama, Kumaran and Norazlianie, Sazali and Muhammad, Mat Noor and Rosli, Abu Bakar and Sivaraos, Subramaniam and Talal, Yusaf and Alsalman, Ali and Yaw, Chong Tak and Paw, Koh Siaw and Kiong, Tiong Sieh and Foo, Benedict (2024) Exploring the Potentials of Copper Oxide and CNC Nanocoolants. Journal of Advanced Research in Applied Sciences and Engineering Technology, 34 (2). pp. 315-326. ISSN 2462-1943. (Published)

Zuwairie, Ibrahim and Nor Azlina, Ab. Aziz and Nor Hidayati, Abd Aziz and Tasiransurini, Ab Rahman (2018) Asynchronous simulated kalman filter optimization algorithm. International Journal of Engineering and Technology(UAE), 7 (4). pp. 44-49. ISSN 2227524X. (Published)

Zuwairie, Ibrahim and Suad Khairi, Mohammed and Badaruddin, Muhammad and Nor Azlina, Ab. Aziz and Nor Hidayati, Abdul Aziz and Tasiransurini, Ab Rahman and Norazian, Subari (2018) A simulated Kalman filter optimizer with white hole operator. International Journal of Engineering & Technology (IJET), 7 (4.36). pp. 420-425. ISSN 2227-524X. (Published)

Book

M., Ishak and Siti Rabiatull Aisha, Idris and S. N., Aqida and Siti Haryani, Tomadi and Mohd Rashidi, Maarof (2016) BMM3611 Manufacturing Processes Laboratory. Penerbit Universiti Malaysia Pahang, Kuantan, Malaysia. ISBN 978-967-0691-97-8

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Fauzi, Ismail (2023) Advanced polymeric membrane technology for gas separation processes. Penerbit UMPSA, Pahang. ISBN 978-967-2831-94-5

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Machine Learning in Sports: Identifying Potential Archers. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 1-9. ISBN 978-981-13-2592-2

Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Devarajan, R. and Norazlianie, Sazali (2023) A route to a high-impact journal article: The most functional strategy in modern history. Penerbit UMPSA, Pahang. ISBN 978-967-2831-95-2

Wan Sharuzi, Wan Harun and Mohd Fairusham, Ghazali and Norazlianie, Sazali and Mohamad Huzaimy, Jusoh and Shahrul Niza, Mokhatar (2023) Steps to become a professional engineer in Malaysia. Penerbit UMPSA, Pahang. ISBN 9789672831914

Yusuf, Muhammad Fakhrul and Ashari, Hasbullah and Razalli, Mohd Rizal (2021) Demand for environmental technological innovation in the manufacturing industry. Penerbit Universiti Malaysia Pahang, Pahang, Malaysia. ISBN 9789672831167

Book Chapter

Ahmad Fakhri, Ab. Nasir and Ahmad Shahrizan, Abdul Ghani and M. Nordin, A. Rahman (2018) Parallel guided image processing model for ficus deltoidea (Jack) moraceae varietal recognition. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 487-503. ISBN 9789811087875

Ahmad Najmuddin, Ibrahim and Fukuoka, Yasuhiro (2018) Effect of assistive grouser mechanism on lightweight rover power consumption pattern on steep soft sand inclines. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 343-351. ISBN 9789811087875

Ahmad Najmuddin, Ibrahim and Pang, Oh Yi and Yap, Wong Kien and Ahmad Shahrizan, Abdul Ghani (2018) Design of fast climbing robot for tree with multiple diverging branche. In: Lecture Notes in Mechanical Engineering. Springer Nature Singapore, pp. 395-402. ISBN 978-981-13-8322-9

Ahmad Shahir, Jamaludin and Hosokawa, A. and Tatsuaki, Furumoto and Tomohiro, Koyano and Yohei, Hashimoto (2018) High precision estimation on physical behavior for cutting with various tool rake angle by finite element method. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 715-723. ISBN 9789811087875

Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and Amiril Sahab, Abdul Sani and Saiful Bahari, Hamzah and Mohd Shahril, Osman (2018) Modelling of fuzzy inference system for micro milling - a preliminary study through FEM. In: Lecture Notes in Mechanical Engineering. Universiti Malaysia Pahang, pp. 445-456. ISBN 978-981-13-8323-6

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof (2015) Wheeled Mobile Robot Path Control in a Complex Trajectory using HybridMethods. In: Recent Advances in Electrical Engineering. Recent Advances in Electrical Engineering Series, 47 . WSEAS Press, Bulgaria, pp. 38-43. ISBN 978 -1-61804- 299 -6

Baarath, Kunjunni and Muhammad Aizzat, Zakaria and Nurul Afiqah, Zainal (2018) An investigation on the effect of lateral motion on normal forces acting on each tires for nonholonomic vehicle. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 611-621. ISBN 9789811087875

Bathrinath, S. and Rahul, K. and Pradeep, J. and Ponnambalam, S. G. and Saravanasankar, S. (2019) Evaluation of influence of principles involved in industry 4.0 over coal industries using TISM. In: Industry 4.0 and Hyper-Customized Smart Manufacturing Supply Chains. IGI Global, Hershey, PA, pp. 244-245. ISBN 9781522590781

Choong, Chun Sern and Ahmad Fakhri, Ab. Nasir and Anwar, P. P. Abdul Majeed and Muhammad Aizzat, Zakaria and Mohd Azraai, M. Razman (2018) Machine learning approach in identifying speed breakers for autonomous driving: an overview. In: Lecture Notes in Mechanical Engineering. Springer, Singapore, pp. 409-424. ISBN 978-981-13-8323-6

El Sawy, Abdelrahman and Anwar, P. P. Abdul Majeed and Musa, Rabiu Muazu and Mohd Azraai, M. Razman and Mohd Hasnun Ariff, Hassan and Abdul Aziz, Jaafar (2018) The Flexural Strength Prediction of Porous Cu-Sn-Ti Composites via Artificial Neural Networks. In: Lecture Notes in Mechanical Engineering. Universiti Malaysia Pahang, pp. 403-407. ISBN 978-981-13-8323-6

Faiz, Mohd Turan and Badrul, Omar (2015) Application of Integrated Fuzzy-AHP for Design Concept Evaluation: A Case Study on Mold Design Selection. In: The Malaysia-Japan Model on Technology Partnership : International Proceedings 2013 of Malaysia-Japan Academic Scholar Conference. Springer, Japan, pp. 101-113. ISBN 978-4-431-54438-8 (Print); 978-4-431-54439-5 (Online)

Faiz, Mohd Turan and Kartina, Johan and Chui Sheng, Tay (2018) Business Sustainability Performance (BSP) quantifier for Malaysia context. In: Lecture Notes in Mechanical Engineering. Springer Singapore, Singapore, pp. 373-384. ISBN 978-981-13-8323-6

Fatchurrohman, Nanang and Azriee, Abdullah (2018) Surface roughness and wear properties of Al–Al2O3 metal matrix composites fabricated using friction stir processing. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 155-160. ISBN 9789811087875

Ismail, Ibrahim and Zuwairie, Ibrahim and Hamzah, Ahmad and Zulkifli, Md. Yusof (2016) An Assembly Sequence Planning Approach with a Multi-State Particle Swarm Optimization. In: Trends in Applied Knowledge-Based Systems and Data Science. Lecture Notes in Computer Science, 9799 . Springer International Publishing, Switzerland, pp. 841-852. ISBN 978-3-319-42006-6

Khilji, Irshad Ahamad and Pathak, Sunil and Siti Nadiah, Mohd Saffe and Biswas, Shatarupa and Singh, Yogesh (2021) Opportunities and ehallenges in Nanoparticles Formation by Electrical Discharge Machining. In: Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 203-210. ISBN 978-981-15-7711-6

Lim, H. Y. and Muhammad Aizzat, Zakaria (2018) Trajectory tracking analysis of planar end-effector upper limb rehabilitation device. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 183-195. ISBN 9789811087875

M., Azuddin and Zahari, Taha (2016) Micro Plastic Part Filling Capabilities through Simulation and Experiment A Case Study on Micro Gear Shape. In: Comprehensive Materials Finishing. Elsevier , pp. 441-465. ISBN 978-0-12-803249-7

M. R. M., Rejab and Mohammad Hazim, Mohamad Hamdan and Quanjin, Ma and Siregar, J. P. and Bachtiar, Dandi and Muchlis, Yusrizal (2020) Historical development of hybrid materials. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier, pp. 445-455. ISBN 978-0-12-813196-1

Mas Ayu, Hassan and Zubaidah, Zamri and Rosdi, Daud and Norizah, Redzuan and Izman, Sudin (2022) The Effect of PLA/HA Coating Thickness on Crack Formation and Corrosion Performance. In: Advanced Materials and Engineering Technologies. Advanced Structured Materials book series (STRUCTMAT), 162 . Springer, Cham, Cham, pp. 47-53. ISBN 978-3-030-92963-3 (Printed); 978-3-030-92964-0(Online)

Miminorazeansuhaila, Loman and Mohd Hafizi, Zohari (2022) Fatigue Detection on glass fibre reinforced polymer material using Fiber Bragg Grating sensor. In: Structural Integrity Cases in Mechanical and Civil Engineering. Structural Integrity, 23 (23). Springer, Cham, Springer. Cham, pp. 115-125. ISBN 978-3-030-85645-8 (Printed); 978-3-030-85646-5(Online)

Mohd Falfazli, Mat Jusof and Ahmad Azwan, Abdul Razak and Shuhairie, Mohammad and Ahmad Nor Kasruddin, Nasir and Mohd Helmi, Suid and Mohd Ashraf, Ahmad and Zuwairie, Ibrahim (2018) Simulated kalman filter algorithm with improved accuracy. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 343-351. ISBN 978-981-13-3708-6

Mohd Hasnun Arif, Hassan and Zahari, Taha and Mohd Ali Hanafiah, Shaharudin and Lim, Kok Wee and Zulfika, Anuar (2018) Development of a soccer ball launching device. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 591-598. ISBN 9789811087875

Muhammad Aizzat, Zakaria and Anwar, P. P. A. Majeed and Ismail, Mohd Khairuddin and Zahari, Taha (2017) Kinematics Analysis of a 3DoF Lower Limb Exoskeleton for Gait Rehabilitation: A Preliminary Investigation. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympics Success: From Theory to Practice. Springer, pp. 168-172. ISBN 978-981-10-3736-8

Muhammad Nur Farhan, Saniman and Nadzir Akif, Dzulkifli and Khairul Anuar, Abd Wahid and Wan Mansor, Wan Muhamad and Khairul Azhar, Mohamad and Erny Afiza, Alias and Jamilah, Mohd Shariff (2022) Water retention properties of a fused deposition modeling based 3D printed polylactic acid vessel. In: Advanced Maritime Technologies and Applications Papers from the ICMAT 2021. Advanced Structured Materials book series, 166 . Sprinter. Champ, pp. 311-323. ISBN 978-3-030-89991-2(Printed); 978-3-030-89992-9 (Online)

Nabi, F. G. and Sundaraj, K. and Kiang, L. C. and Palaniappan, R. and Sundaraj, S. and Ahamed, Nizam Uddin (2017) Artificial Intelligence Techniques Used for Wheeze Sounds Analysis: Review. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympic Success: From Theory to Practice. IFMBE Proceedings, 58 . Springer, Singapore, pp. 37-40. ISBN 978-981-10-3736-8

Ng, Weng Seng and Ahmad Shahrizan, Abdul Ghani (2018) Vision based smart sorting machine. In: Lecture Notes in Mechanical Engineering. Universiti Malaysia Pahang, pp. 13-25. ISBN 978-981-13-8323-6

Norfazillah, Talib and Ainaa Mardhiah, Sabri and Nor Athira, Jamaluddin and Mohamad Hafiz Akmal, Suhimi and Amiril Sahab, Abdul Sani (2022) Effect of Vegetable-Based Nanofluid Enriched with Nanoparticles as Metalworking Fluids During Orthogonal Cutting Process. In: Proceedings of the 3rd Malaysian International Tribology Conference. Lecture Notes in Mechanical Engineering . Springer Nature, Singapore, pp. 90-93. ISBN 978-981-16-9949-8 (Printed); 978-981-16-9949-8(Online)

Nurainaa, Elias and Nafrizuan, Mat Yahya and Sing, Er Hong (2018) Numerical analysis of fuzzy logic temperature and humidity control system in pharmaceutical warehouse using MATLAB fuzzy toolbox. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 623-629. ISBN 9789811087875

Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and K., Baarath (2018) A study on the exposure of vertical vibration towards the brain on seated human driver model. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 601-609. ISBN 9789811087875

Nurul Ain, Abdul Shukor and Idris, Mat Sahat and Mohd Azrul Hisham, Mohd Adib (2018) Ergonomic study on wrist rehabilitation therapy (WRist-T) device. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering, 55 . Springer Singapore, Singapore, pp. 557-563. ISBN 9789811087875

Osman, Azim Azuan and Ahmad Nazif, Noor Kamar and Rahamaddulla, Syed Radzi (2023) Towards Achieving a Sustainable Lean Transformation: Measuring Tangible and Intangible Gains. In: Innovation, Strategy, and Transformation Frameworks for the Modern Enterprise. IGI Global, Hershey, Pennsylvania, pp. 60-87. ISBN 9798369304587, EISBN: 9798369304594

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Anthropometry correlation towards archery performance. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, pp. 29-35. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Concluding remarks. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, p. 45. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Psycho-fitness parameters in the identification of high-potential archers. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, pp. 37-44. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Psychological variables in ascertaining potential archers. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, pp. 21-27. ISBN 978-981-13-2592-2

Rajaram, R. and Jawahar, N. and Ponnambalam, S. G. and Mukund Nilakantan, Janardhanan (2019) Multi objective optimization of economic and environmental aspects of a three-Echelon Supply Chain. In: Industry 4.0 and Hyper-Customized Smart Manufacturing Supply Chains. IGI Global, Hershey, PA, pp. 127-128. ISBN 9781522590781

Rosdi, Daud and Nurazlina, Sulaeman and Mas Ayu, Hassan and Arman Shah, Abdullah (2022) Prediction of Malaysian Talus Bone Morphology Using Artificial Intelligence. In: Advanced Materials and Engineering Technologies. Advanced Structured Materials book series (STRUCTMAT), 162 . Springer Science and Business Media Deutschland GmbH, Springer Link Malaysia, pp. 29-37. ISBN 978-3-030-92963-3 (Printed); 978-3-030-92964-0(Online)

Sin, Yi Lim and Mohd Saberi, Mohamad and Lian, En Chai and Safaai, Deris and Weng, Howe Chan and Sigeru, Omatu and Muhammad Farhan, Sjaugi and Muhammad Mahfuz, Zainuddin and Gopinathaan, Rajamohan and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2016) Investigation of the Effects of Imputation Methods for Gene Regulatory Networks Modelling Using Dynamic Bayesian Networks. In: Distributed Computing and Artificial Intelligence, 13th International Conference. Springer International Publishing, pp. 413-421. ISBN 978-3-319-40161-4

Siregar, J. P. and Z. M., Hafizi and M. R. M., Rejab and Jamiluddin, Jaafar and Mohammad Hazim, Mohamad Hamdan and Bachtiar, Dandi and Tezara, C. and S. M., Sapuan (2019) Vibration analysis of hybrid-reinforced unsaturated polyester composites. In: Unsaturated Polyester Resins: Fundamentals, Design, Fabrication and Applications. Elsevier, Amsterdam, Netherlands, pp. 489-514. ISBN 978-0-12-816129-6

Zahari, Taha and Anwar, P. P. Abdul Majeed and Ismail, Mohd Khairuddin and M. Y., Wong and M. A., Abdullah and M. A., Mohd Razman (2017) The Control of an Upper-Limb CC by Means of a Particle Swarm Optimized Active Force Control for Motor Recovery. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympics Success: From Theory to Practice. Springer, pp. 56-62. ISBN 978-981-10-3736-8

Zahari, Taha and Anwar, P. P. Abdul Majeed and M. A., Abdullah and I.M., Khairuddin and M.A., Zakaria and M. H. A., Hassan (2017) The identification and control of an upper extremity exoskeleton for motor recovery. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), p. 483. ISBN 9789670257884

Zahari, Taha and Jessnor Arif, Mat Jizat (2015) Landmark Tracking Using Unrectified Omniirectional Image for an Automated Guided Vehicle. In: Robot Intelligence Technology and Applications 3. Advances in Intelligent Systems and Computing, 345 . Springer, Switzerland, pp. 663-673. ISBN 978-3-319-16840-1 (print); 978-3-319-16841-8 (online)

Zahari, Taha and Mohd Azraai, M. Razman and N. F., Adnan (2018) The Identification of hunger behaviour of lates calcarifer using k-nearest neighbour. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 393-399. ISBN 9789811087875

Zahari, Taha and Rabiu Muazu, Musa and M.R., Abdullah and M. H. A., Hassan and M. A. M., Razman and Anwar, P. P. Abdul Majeed (2017) Reliability testing of inertial measurement units in the analysis of physiological variables in archery. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 140-141. ISBN 9789670257884

Zamzuri, Hamedon and I., Razemi and Ahmad Rosli, Abdul Manaf and Nafrizuan, Mat Yahya (2018) Innovative method of measuring electrode wear during EDM drilling process using vision system. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 53-63. ISBN 9789811087875

Zetty Ain, Kamaruzzaman and Zaini, Muhamad Zuhaili and Noraina Mazuin, Sapuan (2021) Put an End to Manual Data Entry: How Small Businesses Can Adapt The Changes and Transform? In: Service and Operation Management (Series 3). Series 3 . Penerbit UTHM, Batu Pahat, Johor. ISBN 978-967-2817-33-8

Zuhairah, Zulkfli and M. Faris, Zaidi and Fatchurrohman, Nanang and Zamzuri, Hamedon (2022) Investigation on the Effect of Machining Parameters on Mechanical Properties of Friction Stir Processed Mg–Al-Micro Al2O3 Metal Matrix Composites. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials. Lecture Notes in Mechanical Engineering . Springer Nature Singapore, Singapore, pp. 589-598. ISBN 978-981-19-2889-5 (Printed); 978-981-19-2890-1(Online)

Bulletin

Mohamad Rusydi, Mohamad Yasin (2014) Prof. Emeritus Dr. Ario kongsi kepakaran teknologi kejuruteraan pembuatan. CREATE . p. 13. ISSN 1823-7487

Mohd Fawzi, Zamri and A. R., Yusoff (2014) Development of hot stamping tool by using indirect hot stamping for basic bending part (u-shape). Auto Inexss (7). ISSN 1985-8434

Mohd Zairulnizam, Mohd Zawawi UMP and 3 foreign universities shared expertise in the manufacturing industry. Pekan Review, 9 . p. 38. ISSN 2180-3099

Mohd Zairulnizam, Mohd Zawawi (2013) UMP, 3 universiti luar negara kongsi kepakaran industri pembuatan. CREATE . p. 22. ISSN 1823-7487

UMP, . (2011) Kereta solar “Kilau”merentasi Benua Australia. CREATE . p. 28. ISSN 1823-7487

UMP, . (2011) Tempurung sawit dikitar semula menjadi bahan binaan. CREATE (11). ISSN 1823-7487

UMP, . (2010) UMP, Miyazu perkasakan industri pembuatan acuan. CREATE (38). ISSN 1823-7487

UMP, PNC 61 FKP students graduate from MAI apprentice programme. Pekan Review, 4 . p. 24. ISSN 2180-3099

UMP, PNC Natural Products R&D: gets international recognition. Pekan Review, 1 . pp. 44-45. ISSN 2180-3099

UMP, PNC UMP, KUAS tie-up to enhance mould & die manufacturing. Pekan Review, 3 . pp. 30-31. ISSN 2180-3099

Zuryaty, Zol FKP to assist cluster school to compete at an F1 International Competition for schools. Pekan Review, 9 . p. 77. ISSN 2180-3099

Zuryaty, Zol (2015) UMP-ITB anjur persidangan antarabangsa iMEC dan APSCOMS. CREATE . p. 13. ISSN 1823-7487

Conference or Workshop Item

A., Shah and Siti Nurul Fasehah, . and Mas Ayu, Hassan and Rosdi, Daud and Che Ghani, Che Kob (2021) Improvement of corrosion resistance of tin coated on titanium alloy for biomedical application. In: Journal of Physics: Conference Series; 2nd UPY International Conference on Applied Science and Education, UPINCASE 2020 , 3 - 4 November 2020 , Yogyakarta, Virtual. pp. 1-10., 1823 (1). ISSN 1742-6588

A., Shah and Siti Nurul Fasehah, Ismail and Mas Ayu, Hassan and R., Daud and Che Ghani, Che Kob (2021) Improvement of corrosion resistance of tin coated on titanium alloy for biomedical application. In: Journal of Physics: Conference Series; 2nd UPY International Conference on Applied Science and Education, UPINCASE 2020 , 3 - 4 November 2020 , Yogyakarta, Virtual. pp. 1-10., 1823 (1). ISSN 1742-6588 (print); 1742-6596 (online)

A. H, Hamisa and Mohd Yusof, Taib and W. H., Azmi and R., Mamat and M. Z., Sharif (2020) The stability of TiO2/POE nanolubricant for automotive air-conditioning system of hybrid electric vehicles. In: 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan; Malaysia. pp. 1-10., 863 (1). ISSN 17578981

A. J. S., Hanifah and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak and T., Ariga (2020) Enhancement of mechanical properties of Copper Brazed by laser surface modification. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-12., 788 (012012). ISSN 1757-899X

A. K., Prasada Rao and Oh, Y. S. and Ain, W. Q. and Azhari, A. and Basri, S. and Kim, N. J. (2016) Al-TiH2 Composite Foams Magnesium Alloy. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-5., 114 (1). ISBN 1757-8981 (print); 1757-899X (online)

A. K., Prasada Rao and Shu Yin, Oh and M. K., Faisal and N. J., Kim (2016) Cladding of Mg Alloy with Zr Based BMG Alloy. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-4., 114.

A. M., Efendee and M., Saifuldin and Gebremariam, M.A. and Azmir, Azhari (2018) Effect of magnetic polarity on surface roughness during magnetic field assisted EDM of tool steel. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 1757-8981

A. N., Oumer and Azizuddin, Abd Aziz and Noor Azirhan, Sahat (2018) Numerical investigation on effect of blade shape for stream water wheel performance. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-10., 342 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

A. Q., Zaifuddin and Aiman, Mohd Halil and M., Ishak and T., Ariga (2020) Effect of laser surface modification (LSM) on laser energy absorption for laser brazing. In: OP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019 (ICMER 2019) , 30-31 Julai 2019 , Vistana Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 788 (012013). ISSN 1757-899X

A. R., Marjuki and Farah Amira, Mohd Ghazali and N. M., Ismail and S., Sulaiman and Ismail, Mohd Khairuddin and Anwar, P. P. Abdul Majeed and Abdul Aziz, Jaafar and F., Mustapha and Shahnor, Basri (2016) CAE Applications in a Thermoforming Mould Design. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-10., 114 (012012).

A. R., Yusoff and Bagaber, Salem Abdullah and Fawzi, Zamri (2018) Sustainable machining process calculator. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted)

A. R., Yusoff and Fitriyanti, Arsyad (2015) Evaluation of Surface Roughness and Power Consumption in Machining FCD 450 Cast Iron using Coated and Uncoated Irregular Milling Tools. In: International Manufacturing Engineering Conference 2015 , 12-14 November 2015 , Kuala Lumpur. pp. 1-8., 3 (1). ISSN 2289-697X (Unpublished)

A. R., Yusoff and Nafrizuan, Mat Yahya (2011) A refined differential evolution algorithm for improving the performance of optimization process. In: International Conference on Informatics Engineering and Information Science (ICIEIS 2011) , 14-16 November 2011 , Kuala Lumpur. pp. 184-194., 252 (2). ISSN 1865-0929 ISBN 978-364225452-9

A. S. A., Sani and F. J. P., Sousa and Zamzuri, Hamedon and Azmir, Azhari (2016) Contact Pressure Distribution During the Polishing Process of Ceramic Tiles: A Laboratory Investigation. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-19., 114 (012008). ISSN 1757-8981 (Print), 1757-899X (Online)

A.F., Mohd Sadullah and Nur Fahriza, M. A. and A., Zulkiple (2018) Mode choice for the journey to work during morning peak hour in Klang, Malaysia. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 187-188.. ISBN 9789672145202

Abdul Haleem Habeeb, Mohamed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Anwar, P. P. Abdul Majeed and Mohamed Heerwan, Peeie and Choong, Chun Sern and Baarath, Kunjunni (2021) Rain classification for autonomous vehicle navigation using machine learning. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Universiti Malaysia Pahang (Virtual). pp. 895-903., 730. ISBN 978-981334596-6

Abdul Wahab, Hashmi and Mali, Harlal Singh and Meena, Anoj and Khilji, Irshad Ahamad and Chilakamarry, Chaitanya Reddy and Siti Nadiah, Mohd Saffe (2022) Experimental investigation on magnetorheological finishing process parameters. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1892-1898., 48 (Part 6). ISSN 2214-7853

Abdulwahid, Arman and Hagos, F. Y. and Abdul Adam, Abdullah and R., Mamat and Abd Rashid, Abd Aziz and Cheng, C. K. (2020) Syngas production through steam and CO2 reforming of methane over Ni-based catalyst-A Review. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-18., 736 (042032). ISSN 1757-899X

Abu Hannifa, Abdullah and Zulhelmi, Ismail and Anis Sakinah, Zainal Abidin and Fadwa Sameeha, Ismail and Kamal, Yusoh (2018) PVA/Graphene nanocomposite: morphology and its thermal properties. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (1). ISSN 17578981

Afrouzeh, Mohsen and Konukman, Ferman and Musa, Rabiu Muazu and Suppiah, Pathmanathan K. and Abdul Majeed, Anwar P. P. and Mohd Azraai, Mohd Razman (2022) Kinematic variables defining performance of basketball free-throw in novice children : An information gain and logistic regression analysis. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 949-956., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Ahamed, Nizam Uddin and Zulkifli, Md. Yusof and Zamzuri, Hamedon and Rabbi, M. F. and Tasriva, Sikandar and Palaniappan, Rajkumar and Ali, Md. Asraf and Rahman, S. A. M. Matiur and Sundaraj, Kenneth (2016) Fuzzy Logic Controller Design for Intelligent Drilling System. In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2016) , 22 October 2016 , Shah Alam, Malaysia. pp. 208-213.. ISBN 978-1-5090-4186-2 (In Press / Online First)

Ahmad, Redza and Yasui, Toshiaki and Fukumoto, Masahiro (2016) Deposition of Hard Chrome Coating onto Heat Susceptible Substrates by Low Power Microwave Plasma Spray. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-10., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Ahmad Bisyri Husin, Musawi Maliki and Mohamad Razali, Abdullah and Hafizan, Juahir and Farhana, Abdullah and Nurul Ain Shahirah, Abdullah and Rabiu Muazu, Musa and Siti Musliha, Mat-Rasid and Aleesha, Adnan and Norlaila Azura, Kosni and Wan Siti Amalina, Wan Muhamad and Nur Afiqah, Mohamad Nasir (2018) A multilateral modelling of Youth Soccer Performance Index (YSPI). In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-9., 342 (1). ISSN 17578981

Ahmad Bisyri Husin, Musawi Maliki and Mohamad Razali, Abdullah and Hafizan, Juahir and Wan Siti Amalina, Wan Muhamad and Nur Afiqah, Mohamad Nasir and Rabiu Muazu, Musa and Siti Musliha, Mat-Rasid and Aleesha, Adnan and Norlaila Azura, Kosni and Farhana, Abdullah and Nurul Ain Shahirah, Abdullah (2018) The role of anthropometric, growth and maturity index (AGaMI) influencing youth soccer relative performance. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-9., 342 (1). ISSN 1757-8981

Ahmad Faizal, Mohd Zain and Jia, Wei Low and Nafarizal, Nayan and Mohd Zainizan, Sahdan and Mohd Khairul, Ahmad and Ali Yeon, Md Shakaff and Ammar, Zakaria (2014) Correlation Between the Microstructure of Copper Oxide Thin Film and Its Gas Sensing Response. In: Proceedings of the IEEE International Conference on Semiconductor Electronics (ICSE 2014)) , 27-29 August 2014 , Kuala Lumpur. pp. 32-35..

Ahmad Faizal, Mohd Zain and Sabirin, Abdullah and Zeti Akma, Rhazali (2013) Determination of Gyro Frequency from Critical Frequency Measurements Over Parit Raja, Malaysia. In: International Conference on Space Science and Communication (IconSpace) , 1-3 July 2013 , Melaka. pp. 440-443..

Ahmad Fakhri, Ab. Nasir and Siti Suhaila, Sabarudin and Anwar, P. P. Abdul Majeed and Ahmad Shahrizan, Abdul Ghani (2018) Automated egg grading system using computer vision: Investigation on weight measure versus shape parameters. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-9., 342 (1). ISSN 17578981

Ahmad Najmuddin, Ibrahim and Fukuoka, Yasuhiro and Siti Suhaila, Sabarudin (2019) Effects of Wheel Grouser Angle of Attack on Simulated Robot Wheel Performance on Soft Sand with High Slip Condition. In: IEEE 4th International Conference on Advanced Robotics and Mechatronics (ICARM 2019) , 3-5 July 2019 , Osaka University, Japan. pp. 1-6.. (Unpublished)

Ahmad Nasser, Mohd Rose and Mohd Fadzil Faisae, Ab. Rashid and Nik Mohd Zuki, Nik Mohamed and Muhammad Aiman Safwan, Jubri (2021) The implementation of lean manufacturing and ergonomics in small medium enterprise – Case study. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (012057). ISSN 1757-8981

Ahmad Noor Syukri, Zainal Abidin and Arief Hakimi, Azmi and Khairil Anwar, Abu Kassim and Ahmad Shahir, Jamaludin and Mohd Nizari, Mhd Razal (2022) A Review on Automotive Tires Significant Characteristic Identification for General Consumers. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 375-385.. ISSN 2195-4356 ISBN 978-981-19-4425-3 (In Press / Online First)

Ahmad Rasdan, Ismail (2010) Regression Analysis In Determining The Influence Of Relative Humidity Towards Workers' Performance. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Ahmad Rasdan, Ismail and Norfadzilah, Jusoh and Nor Kamilah, Makhtar and Raemy, Md Zein and Muhammad, Mat Noor and Khairul Azhar, Mat Daud (2021) Optimization of Temperature and Relative Humidity with Maximum Oxygen Uptake (VO2max) and Heart Rate (HR) by Using Response Surface Methodology (RSM). In: Human-Centered Technology for a Better Tomorrow: Proceedings of HUMENS 2021 , 22 February 2021 , Pekan, Pahang, Malaysia. pp. 723-734.. ISBN 978-981-16-4115-2

Ahmad Ridhauddin, Abdul Rauf and Wan Hasbullah, Mohd Isa and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Mohd Hafiz, Arzmi and Abdul Majeed, Anwar P. P. (2022) The classification of oral squamous cell carcinoma (OSCC) by means of transfer learning. In: Lecture Notes in Networks and Systems; 9th International Conference on Robot Intelligence Technology and Applications, RiTA 2021 , 16-17 December 2021 , Daejeon. pp. 386-391., 429. ISBN 978-303097671-2

Ahmad Shahir, Jamaludin and Hosokawa, A. and Furumoto, T. and Koyano, T. and Hashimoto, Y. (2018) Study on the effectiveness of Extreme Cold Mist MQL system on turning process of stainless steel AISI 316. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 17578981

Ahmad Shahrizan, Abdul Ghani and Ahmad Fakhri, Ab. Nasir (2019) Superposition of dual image fusion with improved dehazing methods for high visibility of underwater image. In: The 17th IEEE International Conference On Pervasive Intelligence And Computing (PICOM 2019) , 3 - 9 Ogos 2019 , Fukoaka, Japan. pp. 1-6.. ISBN 978-1-7281-3025-5 (Print); 978-1-7281-3024-8 (Online)

Ahmad Shahrizan, Abdul Ghani and Muhammad Daniel Naim, Zulkifflee (2022) Investigation on data acquisition accuracy for long range communication using RFM LoRa. In: 2022 8th International Conference on Control, Decision and Information Technologies, CoDIT 2022 , 17-20 May 2022 , Istanbul. pp. 320-325. (180591). ISBN 978-166549607-0

Ahmad Shahrizan, Abdul Ghani and Suresh, Sundarajoo (2018) Development of auto-tracking mobile robot. In: 4th International Conference on Science in Information Technology (ICSITECH 2018) , 30-31 Oct 2018 , Melaka. pp. 1-6.. (Unpublished)

Ainizar, Mustapa and Zulkifli, Md. Yusof and Asrul, Adam and Badaruddin, Muhammad and Zuwairie, Ibrahim (2018) Solving assembly sequence planning using angle modulated simulated kalman filter. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Ainur Munira, Rosli and Norlida, Jamil and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and A. R., Yusoff (2021) Tool Wear Observation During Unconventional Low Speed Machining Using Low Cost Micromilling. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 589-597.. ISBN 978-981-15-9505-9

Aisha, Muhammad and Ali, Mohammed A. H. and Haruna, Shanono Ibrahim (2019) Structural analysis of a diesel engine connecting rod using four different materials. In: 1st International Conference On Mechatronics, Automation And Cyber-Physical Computer Systems (MAC-2019) , 7 March 2019 , Federal University of Technology Owrrie Nigeria. pp. 1-8.. (Unpublished)

Al-Talib, Ammar A. and Sarah Atifah, Saruchi and Suhana, Hassan and Nor Aziyatul Izni, Mohd Rosli (2023) Design and Fabrication of a Mutual Control Electronic Circuit for Solar and Electrical Water Heating. In: 28th International Conference on Artificial Life and Robotics, ICAROB 2023 , 9 February - 12 February 2023 , Virtual, Online. pp. 689-693., 28. ISSN 2188-7829 ISBN 2188-7829

Al-Talib, Ammar A. M. and Tew, Hwa Hui and Sarah ‘Atifah, Saruchi and Noor Idayu, Mohd Tahir and Nor Fazilah, Abdullah (2024) Auto indoor hydroponics plant growth chamber. In: Proceedings Of The 2024 International Conference On Artificial Life And Robotics. The 2024 International Conference On Artificial Life And Robotics (ICAROB 2024) , 22 - 25 February 2024 , Oita, Japan. pp. 1-9.. ISBN 978-4-9913337-0-5

Al-Talib, Ammar Abdulaziz Majeed and Aung, Ik Chu and Noor Idayu, M. Tahir and Sarah ‘Atifah, Saruchi (2023) Solar powered outdoor air purifier with air quality monitoring. In: Proceedings of International Conference on Artificial Life and Robotics; 28th International Conference on Artificial Life and Robotics, ICAROB 2023 , 9-12 February 2023 , Virtual, Online. pp. 688-693. (290429). ISSN 2435-9157 ISBN 978-499083508-8

Al-Talib, Ammar Abdulaziz Majeed and They, Kai Yang and Noor Idayu, M.Tahir and Sarah ‘Atifah, Saruchi (2023) Design and fabrication of power generating treadmill. In: Proceedings of International Conference on Artificial Life and Robotics; 28th International Conference on Artificial Life and Robotics, ICAROB 2023 , 9-12 February 2023 , Virtual, Online. pp. 710-714. (290429). ISSN 2435-9157 ISBN 978-499083508-8

Alanas, Edith and Erdawati, Erdawati and Saefurahman, Ganjar and Amiril Sahab, Abdul Sani (2021) Utilization of cellulose nanocrystals (CNC) as a filler for chitosan-based films for chili peppers packaging. In: IOP Conference Series: Earth and Environmental Science, International Conference of Biomass and Bioenergy 2020 , 10-11 August 2020 , Bogor, Indonesia. pp. 1-12., 749 (012028). ISSN 1755-1307

Alenezi, R. A. and Norkhizan, A. M. and Rani, H. A. and Maulana, M. I. and Yasar, M. (2019) An experimental investigation of a diesel engine using carbon nanotubes blended with biodiesel. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012048). ISSN 1757-8981 (Print), 1757-899X (Online)

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof (2016) Mechatronic Design and Development of an Autonomous Mobile Robotics System for Road Mark Painting. In: 15th International Conference on Circuits, Systems, Electronics, Control and Signal Processing , 14-18 April 2016 , Istanbul, Turkey. pp. 1-6.. (Unpublished)

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof and Anwar, P. P. Abdul Majeed (2016) Sensors Fusion based Online Mapping and Features Extraction of Mobile Robot in the Road Following and Roundabout. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-12., 114. ISSN 1757-8981 (Print); 1757-899X (Online)

Ali, Mohammed A. H. and Nortasha, A. Yusoff (2018) Development of tele-monitoring attendance system using RFID and photo-cell. In: 2018 IEEE International Conference On Automatic Control And Intelligent Systems (I2CACIS 2018) , 20 - 21 Oktober 2018 , Shah Alam, Selangor. pp. 1-6.. (Unpublished)

Ali, Mohammed A. H. and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof and Musa, Mailah (2017) Global Mobile Robot Path Planning using Laser Simulator. In: International Symposium on Robotics and Manufacturing Automation (ROMA) 2016 , 25-27 September 2016 , Ipoh, Perak. . ISBN 9781509009282

Aliaa, Zanurin and Nor Azmi, Hj Johari and Juliawati, Alias and Mas Ayu, Hassan and Norizah, Hj Redzuan and Sudin, Izman (2021) Research progress of sol-gel ceramic coating : A review. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1849-1854., 48 (176050). ISSN 2214-7853

Alzaghir, Abdullah Faisal and Mohd Nazir, Mat Nawi and Asmelash, Mebrahitom Asmelash and Azmir, Azhari (2022) Optimization of waterjet paint removal operation using artificial neural network. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 11-20., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Amerrudin, Azizi and Norazlianie, Sazali and Mohd Nizar, Mhd Razali and Muhamad Zahim, Sujod and Ahmad Afif, Mohd Faudzi and Siregar, Januar Parlaungan (2022) Investigation of stabilizing internal temperature and humidity of peltier-based cooling refrigerator supplied by small scale PV. In: Engineering Technology International Conference (ETIC 2022). Engineering Technology International Conference (ETIC 2022) , 7-8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 159-163., 2022. ISBN 978-1-83953-782-0

Amiir Haamzah, Mohamed Ismail and Anwar, P. P. Abdul Majeed and E. H., Yap and A. H. P., Tan and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and M. A., Abdullah (2022) The employment of transfer learning for Covid-19 diagnostics: A ResNet evaluation. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 128..

Amir, Azizi (2015) An Integrated Framework of Critical Techniques in Implementation of Total Quality Management. In: International Conference on Industrial Engineering and Operations Management (IEOM 2015) , 3-5 March 2015 , Dubai. pp. 1-7.. ISBN 978-1-4799-6064-4

Amir, Azizi (2015) Relationships between Total Quality Management Critical Techniques in Automotive Industry. In: International Conference on Industrial Engineering and Operations Management (IEOM 2015) , 3-5 March 2015 , Dubai. pp. 1-8..

Amir, Azizi and Daniel, Osezua Aikhuele (2015) An Integrated Model of Kano and Quality Function Deployment for Evaluation of Lean Production Tools in Assembly Environment. In: International Conference on Industrial Engineering and Operations Management (IEOM 2015) , 3-5 March 2015 , Dubai. pp. 1-6..

Amira Qistina Syamimi, Zaifuddin and Aiman, Mohd Halil and Quazi, Moinuddin Mohammed and Muhammad Izhar, Ishak (2021) Enhancement of laser absorptivity in metal by laser surface modification. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and A. Z., Hishamudin (2019) Effect of nozzle distance and cutting parameters on MQL machining of AISI 1045. In: Journal of Physics: Conference Series, International Conference on Mechanical and Manufacturing Engineering (ICME2018) , 16-17 July 2018 , Johor, Malaysia. pp. 1-8., 1150 (012045). ISSN 1742-6596

Amiril Sahab, Abdul Sani and Muhammad Asyraaf Rusyaidi, Abdul Rauf and Aifa Arina, Mohd Alwi and Nur Hidayah, Mohd Nizam (2021) Calophyllum inophyllum (CI) fruits kernel seed separator for biolubricant production line. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Amiril Sahab, Abdul Sani and Muhammad Nur Qayyum, Kamarulbahrin (2021) Halogen dryer for roselle tea production. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Amiril Sahab, Abdul Sani and Nor Athira, Jamaluddin and Ahmad Shahir, Jamaludin and Norfazillah, Talib (2021) Calophyllum-Inophyllum from Pahang Malaysia as Biolubricant Feedstock for Industrial Application. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 441-449., 1. ISBN 978-981-15-9505-9

Amiril Sahab, Abdul Sani and Shahandzir, Baharom and Noor Asimah, Mamat and Amirah Sakinah, Mohd Rozlan and Norfazillah, Talib (2022) Comparative evaluation of crude Tamanu oil performance as metalworking fluids. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1783-1788., 48 (Part 6). ISSN 2214-7853

Amirul Ashraf, Makhtar and Nurul Hidayah, Razak and Zhang, Cheng (2020) Tool deterioration of stainless steel 316 in wet milling operation using carbide tool. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 590-595.. ISBN 978-981-15-0950-6

Anes, G. Mrwan and Ang, F. Chen and M. Akmal, Adzmi and M., Hafiz and K., Kamal and Mohd Fahmi, Othman and Abdul Adam, Abdullah (2019) Effect of AL2O3, SIO2 and CNT nanoparticles blend fuels on diesel engine performances and emission characteristics. In: 8th Global Conference On Global Warming , 22-25 April 2019 , Qatar University, Doha, Qatar. pp. 1-34.. (Unpublished)

Anhar, Muhammad P. and Sutikno, S. and M. S. M., Sani (2019) Analysis of bulletproof vest made from fiber carbon composite and hollow glass microsphere (HGM) in absorbing energy due to projectile impact. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012001). ISSN 1757-8981 (Print), 1757-899X (Online)

Anis Sakinah, Zainal Abidin and Kamal, Yusoh and Saidatul Shima, Jamari and A. H., Abdullah and Zulhelmi, Ismail (2016) Enhanced Performance of Alkylated Graphene Reinforced Polybutylene Succinate Nanocomposite. In: AIP Conference Proceedings, 2nd International Conference on Functional Materials and Metallurgy (ICoFM 2016) , 28 May 2016 , Penang, Malaysia. pp. 1-5., 1756 (040005). ISBN 978-0-7354-1414-3

Anuar, Mohamed and Nur Aqilah, Othman and Hamzah, Ahmad and Mohd Hasnun Ariff, Hassan (2022) Investigation of the optimal sensor location and classifier for human motion classification. In: ICCSCE 2022 - Proceedings: 2022 12th IEEE International Conference on Control System, Computing and Engineering , 21-22 October 2022 , Penang. pp. 142-146. (184194). ISBN 978-166548339-1

Anwar, P. P. Abdul Majeed and Zahari, Taha and A. F. Z., Abidin and Muhammad Aizzat, Zakaria and Ismail, Mohd Khairuddin and M. A. M., Razman and Z., Mohamed (2017) The Control of a Lower Limb Exoskeleton for Gait Rehabilitation: A Hybrid Active Force Control Approach. In: IEEE International Symposium on Robotics and Intelligent Sensors, IRIS 2016 , 17- 20 December 2016 , Hosei UniversityTokyo; Japan. pp. 183-190., 105. ISSN 1877-0509

Anwar, P. P. Abdul Majeed and Zahari, Taha and Ismail, Mohd Khairuddin and Mohd Yashim, Wong Paul Tze and Muhammad Amirul, Abdullah and Mohd Azraai, M. Razman (2017) The Control of an Upper-Limb Exoskeleton by Means of a Particle Swarm Optimised Active Force Control for Motor Recovery. In: IFMBE Proceedings: 3rd International Conference on Movement, Health & Exercise (MoHE 2016) , 28-30 September 2016 , Melaka, Malaysia. pp. 56-62., 58. ISBN 978-981-10-3737-5

Anwar, P. P. Abdul Majeed and Zahari, Taha and M. A., Abdullah and I.M., Khairuddin and M. A., Zakaria (2018) The control of an upper limb exoskeleton system for passive stroke rehabilitation: An active force control approach. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 297-298.. ISBN 9789672145202

Anwar Ilmar, Ramadhan and W. H., Azmi and R., Mamat (2020) Heat transfer characteristics of car radiator using tri-hybrid nanocoolant. In: 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October. 2019 , Kuantan; Malaysia. pp. 1-10., 863 (1). ISSN 17578981

Aqilah, Kamaruzaman and Nurul Akmal, Che Lah (2020) Formation of ZnO nanoparticles in the presence of Tannic acid. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 61-64., 41 (168124). ISSN 2214-7853

Asogan, Arjun and Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Haziqatulhanis, Ibrahim and Krishnan, Rishen Nair (2023) FTIR analysis of plant-based cellulose as adsorbents for water remediation. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 89-94.. ISSN 2195-4356 ISBN 978-981-19-4425-3

Asrul, Adam (2018) Parameters optimization of surface grinding process with particles swarm optimization, gravitational search, and sine cosine algorithms: a comparative analysis. In: International Conference On Electrical, Electronic, Communication And Control Engineering (ICEECC 2018) , 28 - 29 November 2018 , KSL Hotel, Johor Bahru, Malaysia. pp. 1-8.. (Unpublished)

Athirah, B. and Nurul Shahida, M. S. (2019) Occupational noise exposure among airport workers in Malaysia: an ergonomic investigation. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Atnaw, Samson M. and Shaharin, A. Sulaiman and Japar, Abdul Rahman (2014) Study on Co-Gasification of Oil Palm Fronds and Wood. In: International Renewable and Sustainable Energy Conference (IRSEC 2014) , 17-19 October 2014 , Congress Palace Ouarzazate, Morocco. pp. 536-541..

Aussawarangkul, Thitisak and S. A., Che Ghani and Wattanasinbumrung, Pakanun and Sawangsri, Worapong (2023) Comparative Study on the Automated Warehouse with Cartesian Robot Using PLC and Arduino. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 627-636.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Azizol Heirey, Bahari and Zamzuri, Hamedon (2022) Lean management in quality improvement of cutting and hot forming process for window tint. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 70..

Azmir, Azhari and Schindler, Christian and Godard, Claudia and Gibmeier, Jens and Kerscher, Eberhard (2015) Effect of Multiple Jet Passes Treatment in Waterjet Peening on Fatigue Performance. In: 1st International Conference on Applied Surface Science (ICASS 2015) , 27-30 July 2015 , Shanghai, China. pp. 1-20.. (Unpublished)

Azmir, Azhari and Zamzuri, Hamedon and Mebrahitom, A. (2017) A study on Wire Breakage in Electrical Discharge Machining of Polyurethane Foam. In: Materials Today: Proceedings, 6th International Conference of Materials Processing and Characterization (ICMPC 2016) , 5-7 December 2016 , Hyderabad, India. pp. 5222-5227., 4 (4). ISSN 2214-7853

B., Norhafzan and S. N., Aqida and F., Mifthal and A. R., Zulhishamuddin and I., Ismail (2017) Effect of heating time on hardness properties of laser clad gray cast iron surface. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Baarath, Kunjunni and Muhammad Aizzat, Zakaria and Suparmaniam, M. V. and Mohd Yazid, Abu (2017) Platooning Strategy of Mobile Robot: Simulation and Experiment. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-13., 90 (01060). ISSN 2261-236X

Badaruddin, Muhammad and Mohd Saberi, Mohamad and Zuwairie, Ibrahim and Kamil Zakwan, Mohd Azmi and Mohd Ibrahim, Shapiai and Mohd Falfazli, Mat Jusof (2019) Oppositional learning prediction operator with jumping rate for simulated kalman filter. In: International Conference on Computer and Information Sciences, ICCIS 2019 , 3 - 4 April 2019 , Jouf University, Aljouf, Kingdom of Saudi Arabia. pp. 1-7.. ISBN 978-153868125-1

Bagaber, Salem Abdullah and A. R., Yusoff (2017) A comparative study on performance of CBN inserts when turning steel under dry and wet conditions. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012041). ISSN 1757-899X

Benjunior, B. and Asnul Hadi, Ahmad and M. M., Rashidi (2019) Direct thermal method pouring temperature and holding time effect on aluminium alloy 6061 microstructure. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-4.. (Unpublished)

Bhalaji, R. K. A. and Bathrinath, S. and Ponnambalam, S. G. and Saravanasankar, S. (2020) Analyze the factors influencing human-robot interaction using MCDM method. In: Materials Today: Proceedings; 3rd International Conference on Advanced Materials and Modern Manufacturing, ICAMMM 2020 , 3 - 4 April 2020 , Tamil Nadu, India. pp. 100-104., 39. ISSN 2214-7853

Brapakaran, Paranitharan and Abdullah, N. A. Z. and M. Fouzi, S. M. and Sani, M. S.M. (2019) Correlation of numerical and experimental analysis for dynamic behaviour of a 3 blade propeller structure. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Selangor. pp. 1-10., 1262 (012019). ISSN 1742-6588

Cassinath, Z. and A. K., Prasada Rao (2016) Development of Axial Continuous Metal Expeller for Melt Conditioning of Alloys. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-6., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Ch'Ng, S. Q. and Nasir, S. M. and Fathullah, M. and Noriman, N. Z. and Mohd Sazli, Saad (2018) Warpage analysis on thick shell part using response surface methodology (RSM) and bat algorithm (BA) to optimize parameter setting in injection molding process. In: AIP Conference Proceedings; 4th International Conference on Green Design and Manufacture 2018, IConGDM 2018 , 29 - 30 April 2018 , Eden Star Saigon Hotel, Ho Chi Minh, Vietnam. pp. 1-2., 2030 (020167). ISSN 0094-243X ISBN 9780735417526

Chang, Yong En and Ali, Mohammed A. H. (2018) Control of wheeled mobile robot in restricted environment. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 17578981

Che Dini Marini, Che Mohammad Ishkandar El-Rahimin and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2020) Investigation of wear performance of friction stir processed aluminium metal matrix composites. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1740-1744., 46 (169722). ISSN 2214-7853

Che Dini Marini, Che Mohammad Ishkandar El-Rahimin and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2020) Morphological study of friction stir processed aluminium metal matrix composites. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1745-1748., 46 (169722). ISSN 2214-7853

Chen, Qiqi and Zhang, Bo and Bai, Yutian and Wang, Liheng and M. R. M., Rejab (2020) Review of phononic crystals and acoustic metamaterials. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-10., 788 (012052). ISSN 1757-8981 (Print), 1757-899X (Online)

Cheng, Jack Kie and Hassan, Ahmed Khalif and Norhana, Mohd Aripin and Rafiuddin, Mohd Yunus (2019) An analytic hierarchy process approach in decision-making for material selection in an automotive company: a case study. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 472-484., 2019. ISSN 2518-668X

Cheng, Wong See and Rassem, Taha Hussein (2021) 3D game-based learning music theory with augmented reality (AR). In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Chew, Wi Kang and Muhammad Aizzat, Zakaria (2019) Rover car outdoor localisation for navigation tracking using differential global positioning system estimation. In: Intelligent Manufacturing and Mechatronics: Proceedings of the 2nd Symposium on Intelligent Manufacturing and Mechatronics – SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 535-556.. ISBN 978-981-13-9539-0

Chi Hung, Chong and Mohd Azri Hizami, Rasid (2019) Improvement of heat transfer for DC motor windings. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Chilakamarry, Chaitanya Reddy and Dr. Mimi Sakinah, Abdul Munaim and Zularisam, Abdul Wahid and Ahamad Khilji, Irshad (2022) Growth profile study of Escherichia Coli K12 by optical density measurement. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 85..

Chin, Hau Lim and Mahendra Kumar, Jothi Letchumy and Rashid, Mamunur and Musa, Rabiu Muazu and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2022) The Classification of Hallucination: The Identification of Significant Time-Domain EEG Signals. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 989-997., 730. ISSN 1876-1100 ISBN 978-981334596-6

Choon, Cheow Shek and Ismayuzri, Ishak (2022) Feasibility study of CO, CO2, NO2 and O2 sensors for hazardous gas detection system in vehicle cabin. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 537-547., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

D. M., Nuruzzaman and Nurizzathanis, Mohamad Kusaseh and Noor Mazni, Ismail and Iqbal, A. K. M. Asif and M. M., Rahman and A., Azhari and Zamzuri, Hamedon and C., Shin Yi (2020) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018 , 27-28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29 (Part 1). ISSN 2214-7853

Danial, Mohamed and Mohd Yuhyi, Mohd Tadza and Rahisham, Abd Rahman and Mohd Ashraf, Mohamed Ismail (2019) Characterization of Andrassy bentonite as grounding enhancement material. In: The 11th National Technical Seminar on Unmanned System Technology (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang (UMP), Gambang Campus, Kuantan, Malaysia. p. 1.. (Unpublished)

Das, S. and Ain, W. Q. and Azmir, Azhari and A. K., Prasada Rao (2016) Temperature Gradient Field Theory of Nucleation. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Drajad, Wiryawan and Joni, Suhartono and Surjandy, . and Fernando, Yudi and Idris, Gautama So and Gui, Anderes (2019) Malware mobile devices in Indonesia. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 259-267.. ISSN 2518-668X

Efendee, A. M. and Azmir, Azhari and Hasnain, A. R. and Zainal Ariffin, S. and Mukhtar, M. (2021) Investigation of magnetic field effect on MRR, EWR and surface roughness during EDM of AISI420 tool Steel. In: IOP Conference Series: Materials Science and Engineering; International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , 10 - 11 November 2020 , Pekan, Malaysia. pp. 1-11., 1068 (1). ISSN 1757-899X

Eltayeb, Ahmed and Mohd Fua’ad, Rahmat and Mohd Ariffanan, Mohd Basri and Mansour, Mohammed A. M. (2020) Adaptive sliding mode control design for the attitude of the quadrotor unmanned aerial vehicle (UAV). In: IOP Conference Series: Materials Science and Engineering; 2019 Sustainable and Integrated Engineering International Conference, SIE 2019 , 8 - 9 December 2019 , The Everly Putrajaya, Putrajaya. pp. 1-8., 884 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Emilawati, Othman and Nik Nor Fatihah, Nik Mood and Radhiyah, Abd Aziz (2022) Investigation the effect of different fraction EG : H the stability of tio2 nanofluid. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 118..

Erdiwansyah, . and Leman, A.M. and Khoerunnisa, F. and Sardjono, R. E. and Munawir, . and Maulana, M. I. and M. S. M., Sani (2019) Engine modelling of a single cylinder diesel engine fuelled by diesel-methanol blend. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-14., 506 (012014). ISSN 1757-8981 (Print), 1757-899X (Online)

F. A., Adnan and F. R. M., Romlay and Nasir, Shafiq (2018) Real-time slicing algorithm for Stereolithography (STL) CAD model applied in additive manufacturing industry. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-8., 342 (1). ISSN 17578981

F. M., Fakharuddin and Fatchurrohman, Nanang and S., Puteh and H. M. A. R., Puteri (2018) A prototype for communitising technology: development of a smart salt water desalination device. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-7., 342 (1). ISSN 1757-8981

Fadwa Sameeha, Ismail and Kamal, Yusoh and Anis Sakinah, Zainal Abidin and Abu Hannifa, Abdullah and Zulhelmi, Ismail (2019) Three different types of tea as surfactant in liquid exfoliation of graphite : Green tea, black tea and oolong tea. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (1). ISSN 1757-8981

Faisal, Jusoh and M. Nafis, O. Z. (2018) Ergonomics risk assessment among support staff in Universiti Malaysia Pahang. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (012059). ISSN 1757-899X

Faiz, Mohd Turan (2015) Criteria Assessment in Design Evaluation for Product Development using Integrated Fuzzy-TOPSIS. In: 9th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (ECODESIGN 2015) , 2-4 December 2015 , Tokyo, Japan. pp. 1-7.. (Unpublished)

Faiz, Mohd Turan and Kartina, Johan and Muhammad Irfan, Abu Sofian (2018) Development of Sustainability Assessment Tool for Malaysian hydropower industry: A case study. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-10., 342 (012009).

Faiz, Mohd Turan and Kartina, Johan and Nik Hisyamudin, Muhd Nor (2016) Criteria Assessment Model for Sustainable Product Development. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-9., 160. ISSN 1757-8981 (Print); 1757-899X (Online)

Faiz, Mohd Turan and Kartina, Johan and Nur Atiqah, Omar (2018) Development of hydropower sustainability assessment method in Malaysia context. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (012006). ISSN 1757-899X

Faiz, Mohd Turan and Kartina, Johan and Nur Soliha, Sahimi and Nik Hisyamudin, Muhd Nor (2017) Development of Integrated Assessment System for Underground Power Cable Performance: A Case Study. In: 3rd and 4th International Engineering Research and Innovation Symposium, IRIS 2017 , 6–7 May 2017 , Melaka, Malaysia. pp. 1-9., 226 (012020). ISSN 1757-8981 (Print); 1757-899X (Online)

Faiz, Mohd Turan and Kartina, Johan and Wan Nurul Syahirah, Wan Lanang (2017) Assessing sustainability in environmental management: a case study in malaysia industry. In: International Research And Innovation Summit (IRIS) , 6-7 May 2017 , Kings Green Malaysia, Melaka. pp. 1-11..

Faiz, Mohd Turan and Kartina, Johan and Wan Nurul Syahirah, Wan Lanang and Nik Hisyamudin, Muhd Nor (2016) Development of Systematic Sustainability Assessment (SSA) for the Malaysian Industry. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-7., 160 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Fakir, Md Moslemuddin and S., Basri and I. B. M., Sahat and Sharma, K. V. and Sabira, Khatun (2011) OFEM: An optimum finite element algorithm for heat transfer problem in twodimensional insulated-tip rectangular fin. In: 3rd International Conference on Computational Intelligence, Communication Systems and Networks , 26-28 July 2011 , Bali, Indonesia. pp. 173-177.. ISBN 978-1-4577-0975-3

Fakir, Md Moslemuddin and S., Basri and M. M., Rahman and R. A., Bakar (2012) Efficient finite element and differential quadrature methods for heat distribution in one-dimensional insulated-tip rectangular fin. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (1). ISSN 1757-899X

Farah Amira, Mohd Ghazali and M. N., Ahmad and M. F., Ab. Rahim and Abdul Aziz, Jaafar (2016) Temperature Assessment of Heating Stage for a Thermoforming Equipment. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-7., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Farah Fazira, Kamaruzaman and Nuruzzaman, Dewan Muhammad and Noor Mazni, Ismail and Zamzuri, Hamedon and Iqbal, AKM Asif and Azmir, Azhari (2017) Microstructure and Properties of Aluminium-Aluminium Oxide Graded Composite Materials. In: 4th Asia Pacific Conference on Manufacturing System and 3rd International Manufacturing Engineering Conference (APCOMS-iMEC 2017) , 7-8 December 2017 , Yogyakarta, Indonesia. . (Unpublished)

Farhan Anis, Azhar and Mahfuzah, Mustafa and Norizam, Sulaiman and Rashid, Mamunur and Bari, Bifta Sama and Islam, Md Nahidul and Hasan, Md Jahid and Nur Fahriza, Mohd Ali (2022) The Classification of Electrooculogram (EOG) through the application of Linear Discriminant Analysis (LDA) of selected time-domain signals. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 583-591., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Fatchurrohman, Nanang and F.M., Fakharuddin and S., Puteh and H., Puteri (2018) A prototype for communitizing technology: development of smart salt water desalination device. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences ICITES 2018 , 01-02 March 2018 , UMP Pekan, Pahang. p. 1., 342 (1). ISSN 17578981

Fatchurrohman, Nanang and Farhana, N. and Marini, C. D. (2017) Investigation on the effect of Friction Stir Processing Parameters on Micro-structure and Micro-hardness of Rice Husk Ash reinforced Al6061 Metal Matrix Composites. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (012032). ISSN 1757-899X

Fatchurrohman, Nanang and Marini, C. D. and Suraya, Sulaiman and Iqbal, AKM Asif (2015) Investigation of Product Performance of Al-Metal Matrix Composites Brake Disc using Finite Element Analysis. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

Fatchurrohman, Nanang and Nurul Najihah Najlaa, Noor Hamdan and Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah (2020) Investigation on the effect of build orientation and heat treatment on tensile strength and fracture mechanism of FDM 3D printed PLA. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 461-465.. ISBN 978-981-15-0950-6

Fatchurrohman, Nanang and S., Sulaiman (2017) Solidification analysis in permanent mould casting of aluminium alloy LM6 reinforced titanium carbide particulates metal matrix composites. In: 5th International Conference on Engineering and Innovative Materials (ICEIM 2016) , 10-12 September 2016 , Kuala Lumpur. pp. 148-151., 889. ISBN 9783038357704

Fatchurrohman, Nanang and S. T., Chia (2017) Performance Of Hybrid Nano-Micro Reinforced Magnesium Composites Brake Calliper: Simulation Approach. In: 4th International Conference On Mechanical Engineering Research (ICMER 2017) , 1-2 August 2017 , Swiss Garden, Kuantan.. pp. 1-7., 257 (1). ISSN 17578981

Fatchurrohman, Nanang and Suraya, Sulaiman (2016) Solidification Analysis of Aluminium 11.8% Silicon Alloy Reinforced With Titanium Carbide Particulates Produced Using Vortex Mixing - Permanent Mould Casting. In: 10th International Materials Technology Conference & Exhibition (IMTCE 2016) , 16-18 May 2016 , Putra World Trade Centre (PWTC), Kuala Lumpur. . ISSN 2325-0887 (Unpublished)

Fazeeda, Mohamad and Siti Filza, Saharin (2019) Application of discrete event simulation (DES) for queuing system improvement at hypermarket. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 330-346.. ISSN 2518-668X

Fazilah, Abdul Aziz and Nik Mohd Zuki, Nik Mohamed and Ahmad Nasser, Mohd Rose (2023) Introduction of AHP Decision Model for Prioritizing Critical Risk of WMSD in the Automotive Working Environment. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 425-435.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Fazilah, Abdul Aziz and Noraini, Mohd Razali and Nur Najmiyah, Jaafar (2015) Ergonomics Risk Awareness in Associated with Employee’s Learning and Experiences. In: International Symposium on Advancement In Ergonomic and Safety 2015(ERGOSYM2015) , 30 November - 1 Decemcer 2015 , UniMAP, Perlis.. . (Unpublished)

Fazilah, Abdul Aziz and Noraini, Mohd Razali and Nur Najmiyah, Jaafar (2015) An Investigation Into Low Ergonomic Risk Awareness Among Staffs at Early Product Development Phase in Malaysia Automotive Industries. In: Joint Conference of 2nd International Manufacturing Engineering Conference & 3rd Asia Pacific Conference Of Manufacturing Systems 2015 , 12-14 November 2015 , Swiss Garden Hotel, Kuala Lumpur. . (Unpublished)

Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. (2021) Development of a Web-Based System for Assessing and Prioritizing the Critical Ergonomics Risk Factors: A Case Study in a Local Automotive Vehicle Manufacturer. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 471-484.. ISBN 978-981-15-9505-9

Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. (2019) Participatory Ergonomics Intervention for Exploring Risk Factors Lead to Work-Related Musculoskeletal Disorders Among Automotive Production Workers. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 278-283.. ISBN 978-981-15-0950-6

Filzah Lina, Mohd Safeiee and Abu, Mohd Yazid and Nik Nurharyantie, Nik Mohd Kamil and Nurul Farahin, Zamrud (2019) Development of a new costing structure in production environment using activity based costing. In: The 4th International Conference on Engineering Technology 2019 (ICET 2019) , 6-7 July 2019 , TATI University of College, Terengganu. pp. 1-6.. (In Press / Online First)

Filzah Lina, Mohd Safeiee and Mohd Yazid, Abu and Nik Nurharyantie, Nik Mohd Kamil and Nurul Farahin, Zamrud (2020) The Application of Time-Driven Activity Based Costing System on Inductors in Electrics and Electronics Industry. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 88-95.. ISBN 978-981-15-0950-6

Filzah Lina, Mohd Safeiee and Mohd Yazid, Abu and Nik Nurharyantie, Nik Mohd Kamil and Nurul Farahin, Zamrud (2020) Diagnosis and Costing Optimization on Inductors in Electrics and Electronics Industry. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 121-127.. ISBN 978-981-15-0950-6

Fong, Jin Hiung and M. S., Idris (2020) Development of wrist monitoring device to measure wrist range of motion. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-11., 788 (012033). ISSN 1757-8981 (Print), 1757-899X (Online)

H. A., Salaam and M. S., H. Jaman and Ramli, Junid (2019) Sustainability performance model: a case study of pneumatic nipple hose connector. In: International Conference on Mechanical Engineering Research (ICMER) 2019 , 30 - 31 Julai 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-8.. (Unpublished)

H. A., Salaam and Zahari, Taha and T. M. Y. S., Tuan Ya (2018) Multi objective optimization using genetic algorithm of a pneumatic connector. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (012071). ISSN 1757-8981 (Print), 1757-899X (Online)

H. A., Salaam and Zahari, Taha and T.M.Y.S, Tuan Ya and Mohd Razali, Mohamad (2014) Sustainability Product Design Assessment: A Case Study of a Screw Design. In: Proceedings of the Asia Pasific Industrial Engineering & Management System (APIEMS 2014) , 12-15 October 2014 , Jeju, Korea. pp. 517-524..

Halili, Munira and Fernando, Yudi and Tseng, Ming-Lang (2021) Nexus of Sustainable Social Supply Chain Practices, Local Supplier Development and Safety Performance. In: The 2021 Asia Pacific Industrial Engineering & Management Systems 5th Webinar , 3-4 December 2021 , Taiwan. pp. 1-7., 1 (1).

Harun Dzulquornain, Idris and Ahmad Najmuddin, Ibrahim (2023) Effect of tag-to-anchor and multiple tag interference on uwb sensors accuracy for dynamic real-time position tracking of mobile robot in indoor environment. In: 2023 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2023 - Proceedings , 17 June 2023 , Hybrid, Shah Alam. pp. 287-291.. ISBN 979-835032130-2

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Wan Norharyati, Wan Salleh (2019) A significant review on utilization of hybrid nanofluid in heat exchangers: Theoretical and experimental. In: 4th International Manufacturing Engineering Conference (IMEC 2019) , 21-22 August 2019 , The Everly Hotel, Putrajaya, Malaysia. pp. 1-6.. (Unpublished)

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Rishen Nair, Krishnan (2022) Possible Health Risk of Cellulose-Based Materials. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 109-115.. ISBN 978-981-19-2890-1

Hazwan, M. H.M. and Shayfull, Z. and Mohd Rashidi, Maarof and Nasir, S. M. and Noriman, N. Z. (2018) Warpage optimization on front panel housing by using glowworm swarm optimization (GSO) approach. In: AIP Conference Proceedings; 4th International Conference on Green Design and Manufacture 2018, IConGDM 2018 , 29 - 30 April 2018 , Eden Star Saigon Hotel, Ho Chi Minh, Vietnam. pp. 1-2., 2030 (020151). ISSN 0094-243X ISBN 9780735417526

Hazwan, Syafiq and A. M. N., Kamarizan and M. F., Ghazali and A. R., Yusoff (2016) Statistical Analysis of Deep Drilling Process Conditions Using Vibrations and Force Signals. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 74 (00002). ISSN 2261-236X

Hazwan, Syafiq and A. R., Yusoff and A. M. N., Kamarizan and M. F., Ghazali (2015) Statistical Analysis of Deep Drilling Processs Conditions Using Vibrations and Force Signals. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

Hong, Cheow Shek and Ahmad Shahrizan, Abdul Ghani and Ismail, Mohd Khairuddin (2018) Development of an Electronic Kit for detecting asthma in Human Respiratory System. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-8., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Hung, William Chin Wei and Muhammad Aizzat, Zakaria and Muhammad Izhar, Ishak and Mohamad Heerwan, Peeie (2022) Object tracking for autonomous vehicle using YOLO V3. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang, Kuantan. pp. 265-273., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

I. A., Kamaruddin and Mohd Azri Hizami, Rasid and Nurul Fatimah, Abdullah and Abbas, Abdul Wahab (2022) Evaluation of a DC Motor temperature response characterization method under different sampling interval. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 345-360., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

I. M., Sollehudin and Mohamad Heerwan, Peeie (2019) The investigation on dynamic behavior of electric powered wheelchair during the obstacle avoidance. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

Intan Noralisya, Mohd Yusoff and Mohd Yazid, Abu and Sri Nur Areena, Mohd Zaini (2024) Application of activity-based costing and time-driven activity-based costing for kitchen cabinet. In: Springer Proceedings in Materials. Innovative Manufacturing, Mechatronics & Materials Forum, iM3F 2023 , 7 - 8 August 2023 , Pekan, Malaysia. pp. 91-101., 40. ISBN 978-981-99-9848-7

Intan Nur Aqiella, Che Aziz and Ahmad Najmuddin, Ibrahim and Ikmanizardi, Basri and Fukuoka, Yasuhiro (2023) Rover wheel assistive grouser shape effects on traction force in flat soft terrain. In: 2023 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2023 - Proceedings , 17 June 2023 , Hybrid, Shah Alam. pp. 281-286.. ISBN 979-835032130-2

Intan Nur Aqiella, Che Aziz and Ahmad Najmuddin, Ibrahim and Ikmanizardi, Basri and Fukuoka, Yasuhiroo (2023) Rover wheel assistive grouser angle of attack effects on traction force in soft terrain. In: 2023 19th IEEE International Colloquium on Signal Processing and Its Applications, CSPA 2023 - Conference Proceedings , 3-4 March 2023 , Kedah. pp. 236-241.. ISBN 978-166547692-8

Iqbal, AKM Asif and Arai, Yoshio (2014) Experimental and Numerical Study on the Low Cycle Fatigue Behaviour of a Cast Hybrid Metal Matrix Composites. In: International Conference on Automotive Innovation and Green Energy Vehicle , 26-27 August 2014 , Kuantan, Pahang. pp. 1-11.. (Unpublished)

Iqbal, AKM Asif and Arai, Yoshio (2017) Investigation of the Fatigue Crack Propagation Behaviour in the Al Alloy/Hybrid MMC Bi-layer Material. In: IOP Conference Series: Materials Science and Engineering, International Conference on Materials and Intelligent Manufacturing (ICMIM 2017) , 21-23 August 2017 , National University of Singapore (NUS), Singapore. pp. 1-6., 244 (012013). ISSN 1757-8981 (Print), 1757-899X (Online)

Iqbal, AKM Asif and Arai, Yoshio (2016) Stress Measurement During Crack Propagation In Metal Matrix Composites Using Micro-Raman Spectroscopy. In: 17th European Conference on Composite Materials (ECCM17) , 26-30 June 2016 , Munich, Germany. pp. 1-8.. (Unpublished)

Iqbal, AKM Asif and Arai, Yoshio (2017) Stress analysis on the reinforcement particles of the metal matrix composite by Raman spectroscopy. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Irshad Ahamad, Khilji and Siti Nadiah, Mohd Saffe (2021) Collection of nanoparticles using novel filter process by edm. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Ismail, Ibrahim and Zuwairie, Ibrahim and Hamzah, Ahmad and Mohd Falfazli, Mat Jusof and Zulkifli, Md. Yusof and Sophan Wahyudi, Nawawi and Marizan, Mubin (2014) Gravitational Search Algorithm for Assembly Sequence Planning. In: Colloquium on Robotics, Unmanned Systems And Cybernetics 2014 (CRUSC 2014) , 20 Nov 2014 , Universiti Malaysia Pahang. pp. 32-36..

Ismail, Mohd Khairuddin and Lim, Shi Xuen and Mohd Azraai, Mohd Razman and Jessnor Arif, Mat Jizat and Yuen, Edmund and Jiang, Haochuan and Yap, Eng Hwa and Anwar, P. P. Abdul Majeed (2023) The Classification of Wafer Defects: A Support Vector Machine with Different DenseNet Transfer Learning Models Evaluation. In: Robot Intelligence Technology and Applications 7: RiTA 2022 , 7-9 December 2022 , Daejeon, Korea. pp. 304-309., 642. ISBN 978-3-031-26889-2

Ismail, Mohd Khairuddin and S. N., Sidek and H., Md Yusof and Baarath, K. and Anwar, P. P. Abdul Majeed (2017) Assistive-as-needed strategy for upper-limb robotic systems: an initial survey. In: 6th International Conference on Mechatronics (ICOM 2017) , 8-9 August 2017 , Gombak, Selangor. pp. 1-6., 260 (1). ISSN 1757-8981

Ismail, Mohd Khairuddin and S. N., Sidek and H., Md. Yusof and Anwar, P. P. Abdul Majeed and A., Ahmad Puzi and H., Mat Rosly (2018) Assistive-as-needed strategy for upper-limb robotic systems: a preliminary evaluation of the impedance control architecture. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-6., 342 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Ismail Ali, Abdul Aziz and Daing Mohamad Nafiz, Daing Idris and Mohd Hasnun Ariff, Hassan and F., Basrawi and Ahmad Fitri, Yusop and Wafiuddin, Md Ghazali (2017) Finite element analysis on effects of rim and web thicknesses on root stress of thin-rimmed spur gear with asymmetric web arrangement. In: 3rd Advanced Materials Conference (AMC 2016) , 28 - 29 November 2016 , Bayview Hotel, Langkawi, Kedah. , 1901 (1). ISSN 0094-243X

Ismail Ali, Abdul Aziz and S. R., Mohd Hanafi and Daing Mohamad Nafiz, Daing Idris and M. R. M., Rejab and Mohd Hasnun Ariff, Hassan and F., Basrawi (2017) Investigating Effects of Rim and Web Thicknesses on Root Stress of Thin-rimmed Spur Gear with Symmetric Web Arrangement. In: MECHANICAL ENGINEERING RESEARCH DAY 2017 , 30 Mac 2017 , Perpustakaan UTEM. pp. 1-2.. ISBN 978-967-0257-88-4 (online)

Ismed, Iskandar (2016) Competing Risk Models in Reliability Systems, A Gamma Distribution Model with Bayesian Analysis Approach. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-7., 114 (012098).

Ismed, Iskandar (2018) Competing risk models in reliability systems, an exponential distribution model with Bayesian analysis approach. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Ismed, Iskandar (2017) Competing risk models in reliability systems, an exponetial distribution model with Bayesian analysis approach. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 17578981

Ismed, Iskandar and Muchamad, Oktaviandri and R., Wangsaputra and Zamzuri, Hamedon (2019) Competing risk models in reliability systems, an Exponential distribution model with Gamma prior distribution, a Bayesian analysis approach. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 335-341.. ISBN 978-981-15-0950-6

Ismed, Iskandar and Yudi Satria, Gondokaryono (2015) Competing Risk Models in Reliability Systems, a Weibull Distribution Model with Bayesian Analysis Approach. In: Joint Conference Imec-Apcoms 2015 Universiti Malaysia Pahang (Ump) and Institut Teknologi Bandung (ITB), Indonesia , 12-14 November 2015 , Kuala Lumpur. pp. 1-8.. (Unpublished)

J., Mogan and L., Sandanamsamy and N. A., Halim and W. S. W., Harun and K., Kadirgama and D., Ramasamy (2021) A review of FDM and graphene-based polymer composite. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-14., 1078 (012032). ISSN 1757-899X

Javed, Omama and Abd Aziz, Radhiyah (2022) Review: Two-dimensional layered material based electrodes for lithium ion and sodium ion batteries. In: Lecture Notes in Electrical Engineering; 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 399-418., 882. ISSN 1876-1100 ISBN 978-981191576-5

Javed, Omama and Radhiyah, Abd Aziz (2022) Effect of graphene oxide loading on cobalt oxide performance as electrocatalyst for methanol oxidation reaction. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 126..

Jia, Wei Low and Nafarizal, Nayan and Mohd Zainizan, Sahdan and Mohd Khairul, Ahmad and Ali Yeon, Md Shakaff and Ammar, Zakaria and Ahmad Faizal, Mohd Zain (2013) Morphology, Topography and Thickness of Copper Oxide Thin Films Deposited using Magnetron Sputtering Technique. In: Micro and Nanoelectronics (RSM), 2013 IEEE Regional Symposium , Langkawi, The Jewel of Kedah. pp. 352-355..

Jothi Letchumy, Mahendra Kumar and Mamunur, Rashid and Rabiu Muazu, Musa and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2021) The Classification of Wink-Based EEG Signals: The identification on efficiency of transfer learning models by means of kNN classifier. In: RiTA 2020: Proceedings of the 8th International Conference on Robot Intelligence Technology and Applications , 11-13 December 2020 , Virtual hosted by EUREKA Robotics Lab, Cardiff School of Technologies, Cardiff Metropolitan University. pp. 205-213.. ISBN 978-981164802-1

Junaidah, Zakaria and Che Rosmani, Che Hassan and Mahar Diana, Hamid and Ezrin Hani, Sukadarin and Zakaria, Razak (2020) Safety culture level among workers in the selected manufacturing plant. In: IOP Conference Series: Materials Science and Engineering, 26th Regional Symposium on Chemical Engineering (RSCE 2019) , 30 Oktober-1 November 2019 , Kuala Lumpur, Malaysia. pp. 1-8., 778 (012153). ISSN 1757-8981 (Print), 1757-899X (Online)

Junita, Mohd Said and Faiz, Mohd Turan (2022) Optimising MIG weld bead geometry of hot rolled carbon steel using response surface method. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 179-188.. ISBN 978-981-19-2890-1

K., Baarath and Muhammad Aizzat, Zakaria and Nurul Afiqah, Zainal (2019) An investigation on the effect of lateral motion on normal forces acting on each tires for nonholonomic electric vehicle: Experimental results. In: The 26th IAVSD Symposium on Dynamics of Vehicles on Roads and Tracks , 12-16 August 2019 , Gothenburg, Sweden. . (Unpublished)

K. A., Johari and Azizan, Ramli and Mohd Shaiful Zaidi, Mat Desa (2019) Workplace risk Assessment Program for Advanced Technology Training Center (AdTec), Jerantut. In: Symposium on Knowledge Transfer 2019 , 24 - 26 Nov. 2019 , Universiti Sains Malaysia. pp. 1-2.. (Unpublished)

Kai, Gavin Lim Jiann and Ahmad Fakhri, Ab Nasir and Anwar, P. P. Abdul Majeed and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Li, Lim Thai (2022) The classification of impact signal of 6 DOF cobot by means of machine learning model. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. 553- 560., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Kai, Gavin Lim Jiann and Mahendra Kumar, Jothi Letchumy and Rashid, Mamunur and Rabiu Muazu, Musa and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Abdul Majeed, Anwar P. P. (2022) The classification of blinking: an evaluation of significant time-domain features. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. 999 -1004., 730. ISSN 1876-1100 ISBN 978-981334596-6

Kamal Arifin, Mat Piah and Wan Azhar, Wan Yusoff and Nur Iffah, Mohamed Azmi and F. R. M., Romlay (2018) Pso-based PID speed control of traveling wave ultrasonic motor under temperature disturbance. In: IOP Conference Series: Materials Science and Engineering, Asia Pacific Conference On Manufacturing Systems And International Manufacturing Engineering Conference 2017 , 7-8 Disember 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 1757-899X (online)

Kamarulzaman, Mahmad Khairai and Nurul Shamime, Salleh and A. R., Yusoff (2018) Occupational noise reduction in CNC striping process. In: IOP Conference Series: Materials Science and Engineering: The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 17578981

Kamil Zakwan, Mohd Azmi and Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and Anwar, P. P. Abdul Majeed (2021) A Simulated Kalman Filter (SKF) approach in identifying optimum speed during cornering. In: RiTA 2020: Proceedings of the 8th International Conference on Robot Intelligence Technology and Applications , 11-13 December 2020 , Virtual hosted by EUREKA Robotics Lab, Cardiff School of Technologies, Cardiff Metropolitan University. pp. 433-439.. ISBN 978-981-16-4802-1

Kartina, Johan and Faiz, Mohd Turan (2016) The Development of Sustainability Graduate Community (SGC) as a Learning Pathway for Sustainability Education - a Framework for Engineering Programmes in Malaysia Technical Universities Network (MTUN). In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-7., 160 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Kartina, Johan and Faiz, Mohd Turan (2017) Framework of Systematic Sustainability Assessment Strategy (FSSAS) for Hydroelectric Power Industry in Malaysia. In: IOP Conference Series: Materials Science and Engineering, International Research and Innovation Summit (IRIS2017) , 6-7 May 2017 , Melaka, Malaysia. pp. 1-10., 226 (012060). ISSN 1757-8981 (Print), 1757-899X (Online)

Kartina, Johan and Faiz, Mohd Turan (2016) Industrial Training Approach using GPM P5 Standard for Sustainability in Project Management: A Framework for Sustainability Competencies in the 21st Century. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-6., 160 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Kartina, Johan and Faiz, Mohd Turan and Nur Syazwani, Abdul Gani (2018) A New Framework for Sustainable Hydropower Development Project. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (012007). ISSN 1757-899X

Kelvin Leong, Jiun Kiat and Nur Izzati Khoirunnisa, Ismail and Nurrina, Rosli and Erny Afiza, Alias (2019) Study of nozzle distance and oil flow rate effects on the droplets size of minimum quantity lubrication. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Khoo, Jun Li and Radhiyah, Abd Aziz (2021) Callophyllum Inophyllum shell derived of activated carbon for additive of machining lubricant. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1868-1872., 48 (6). ISSN 2214-7853

Kormin, S. and Kormin, F. and Beg, M. D. H. (2019) Effect of plasticizer on physical and mechanical properties of ldpe/sago starch blend. In: Journal of Physics: Conference Series, International Conference on Mechanical and Manufacturing Engineering (ICME2018) , 16-17 July 2018 , Johor, Malaysia. pp. 1-11., 1150 (012032). ISSN 1742-6588 (print); 1742-6596 (online)

Kothari, Richa and Ahmad, Shamshad and Samykano, M. and Tyagi, V. V. and Pandey, A. K. and Saidur, R. (2021) Optimization of extraction process of jatropha oil by using quenching agent. In: IOP Conference Series: Materials Science and Engineering; International Scientific Forum (ISF 2019) , 16th-17th December 2019 , Malacca, Malaysia. pp. 1-9., 1127 (1). ISSN 1757-899X

Latifah Naina, Mohamed and Fernando, Yudi (2019) Research note on eco-efficient supply chain integration. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 736-745.. ISSN 2518-668X

Lee, Chia Kuang and Noor Azlinna, Azizan and Fadzida, Ismail and Nurhaizan, Mohd Zainudin (2013) Developing a Proactive Model to Assess Safety and Health Performance in Electrical and Electronic (E&E) Manufacturing Industries. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET) , 3-4 DECEMBER 2013 , MS GARDEN HOTEL KUANTAN, PAHANG. pp. 1-2..

Lee, Helen and Syarifah Nur Hasanah, Syed Kamarudin and Ismayuzri, Ishak and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin and Mohd Ali Hanafiah, Shaharudin and Mohd Zairulnizam, Mohd Zawawi (2021) Feasibility Study of Wafer Scale Laser Assisted Thermal Imprinting of Glass Nanostructures. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 917-923.. ISBN 978-981-15-9505-9

Lee, Helen May Shian and Syarifah Nur Hasanah, Syed Kamarudin and Mohd Zairulnizam, Mohd Zawawi (2022) Experimental and Numerical Simulation of Hot Embossing for Fabrication of Glass Microlens Array. In: Innovative Manufacturing, Mechatronics & Materials Forum (iM3F 2022) , 20 July 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 1-4.. ISBN 978-1-83953-781-3

Lee, Khai Loon and Lim, Cean Peing (2022) The role of big data and predictive analytics capabilities in supply chain management: The perspective of Malaysia manufacturing firm. In: 12th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2021) , 16-18 November 2021 , Melaka, Malaysia. pp. 295-296..

Lee May Shian, Helen and Aina Aishah, Maharon and Raja Murfiqah, Raja Mohd Fouzy and Norfazilasari, Yasman and Mohd Zairulnizam, Mohd Zawawi (2022) Fabrication of glass microlens array using laser-assisted contactless hot embossing. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 86..

Lemma, Tamiru Alemu and Noraimi, Omar and Gebremariam, M.A. and Shazaib, Ahsan (2019) Anti-friction bearing malfunction detection and diagnostics using hybrid approach. In: Lecture Notes in Mechanical Engineering; 4th International Conference on Mechanical, Manufacturing and Plant Engineering, ICMMPE 2018 , 14 - 15 November 2018 , Melaka. pp. 117-131.. ISSN 2195-4356 ISBN 978-981138296-3

Lim, Sheh Hong and Matalif, Muhammad Uzair and Nurul Najihah, Mohd Nazri and Mohd Azrul Hisham, Mohd Adib (2019) Effects of blood flow pattern and cross-sectional area on hemodynamic of patient-specific cerebral aneurysm via fluid-structure interaction method: A review. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

Lim, Syh Kai and Nurrina, Rosli and A. R., Yusoff (2020) Refining the composition of recycled spent lubricants mixed with alumina nanofluids for machining purpose. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 365-370.. ISBN 978-981-15-0950-6

M., Azuddin and Zahari, Taha and Choudhury, Ahmed Imtiaz (2011) Observation of polypropylene (PP) melt flow on macro and micro cavities during filling phase of injection molding. In: International Conference on Advanced Design and Manufacturing Engineering (ADME 2011) , 16-18 September 2011 , Guangzhou, China. pp. 1273-1277., 314-316. ISSN 1022-6680 ISBN 978-303785215-6

M., Ishak and Norazlianie, Sazali and M. F., Ghazali (2020) A short review on different metal alloys on rapid cooling process. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress (ESChE) 2019 , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8., 736 (052034). ISSN 1757-8981 (Print), 1757-899X (Online)

M., Murugan and Mebrahitom, A. and Azmir, Azhari and Zamzuri, Hamedon (2018) Performance analysis of abrasive waterjet machining process at low pressure. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 17578981

M., Nasuha and M. M., Rashidi and A., Hadi and Z., Shayfull (2021) Effect of thickness on the microstructure and morphology of copper alloy castings. In: AIP Conference Proceedings: Proceedings of Green Design And Manufacture 2020 , 23-24 July 2020 , Arau, Perlis, Malaysia. pp. 1-7., 2339 (020032). ISSN 0094-243X

M., Nasuha and M. M., Rashidi and A., Hadi and Z., Shayfull (2021) Investigation on microstructure and morphology of copper alloy castings. In: AIP Conference Proceedings: Proceedings of Green Design And Manufacture 2020 , 23-24 July 2020 , Arau, Perlis, Malaysia. pp. 1-6., 2339 (020031). ISSN 0094-243X ISBN 978-0-7354-4091-3

M., Norhafana and M. M., Noor and Hagos, F. Y. and A. Aziz, Hairuddin and K., Kadirgama and D., Ramasamy and M. M., Rahman and G., Najafi (2019) Study of fuel properties test: Diesel and various blending nanoparticles based diesel. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

M. A., Anwar and A. K., Zainal and Kurniawan, Tedi and Asmara, Y. P. and W. S., Wan Harun and Priyadonko, G. and Saptaji, Kushendarsyah (2019) Electrochemical exfoliation of pencil graphite core by salt electrolyte. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. p. 1., 469 (1). ISSN 1757-8981

M. F. F., Ab Rashid and Mohd Rizal, Abdul Lani (2010) Surface Roughness Prediction for CNC Milling Process using Artificial Neural Network. In: Proceedings of the World Congress on Engineering 2010 , 30 June - 2 July 2010 , London, UK. pp. 2219-2224..

M. F. F., Ab Rashid and Shah, Izwandi (2009) Optimization of Turning Parameters to Minimize Production Cost using Genetic Algorithm. In: 2nd CUTSE International Conference , 24-25 November 2009 , Curtin University of Technology, Sarawak Campus, Miri, Sarawak. pp. 1-4.. (Unpublished)

M. F. F., Ab Rashid and Tiwari, Ashutosh and Hutabarat, Windo (2011) An Integrated Representation Scheme for Assembly Sequence Planning and Assembly Line Balancing. In: Proceedings of the 9thInternational Conference on Manufacturing Research (ICMR 2011) , 6-8 September 2011 , Glasgow, UK. pp. 125-131..

M. F. F., Ab Rashid and Ahmad Nasser, Mohd Rose and N. M. Zuki, N. M. (2022) Hybrid flow shop scheduling with energy consumption in machine shop using moth flame optimization. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 77-86., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

M. F. F., Ab Rashid and Mohd Abdul, Hadi Osman (2020) Optimisation of energy efficient hybrid flowshop scheduling problem using firefly algorithm. In: 10th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2020 , 18 - 19 April 2020 , Malaysia. pp. 36-41.. ISBN 978-1-7281-5033-8

M. H., M. Ramli and Anwar, P. P. Abdul Majeed and M. A., M. Anuar and Z., Mohamed (2018) Modelling and control of a nonlinear magnetostrictive actuator system. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-7., 342 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

M. M., Noor and K., Kadirgama and E. H., Jamaluddin and M. M., Rahman (2009) Method of Predicting, Estimating and Improving Mean Time between Failures in Reducing Reactive Work in Maintenance Organization. In: Proceedings of National Conference on Postgraduate Research (NCON-PGR) 2009 , 1st October 2009 , UMP Conference Hall, Malaysia. pp. 1176-1186., 8. ISSN 1985-9325(Print); 2180-1606 (Online)

M. N., M. Husnain and M. R. M., Akramin and Z. L., Chuan and K., Rozieana (2019) Statistical distribution for prediction of stress intensity factor using bootstrap s-version finite element model. In: International Conference on Mechanical Engineering Research , 30-31 July 2019 , Kuantan, Pahang. pp. 1-7.. (Unpublished)

M. Nafis, O. Z. and Case, Keith and Watts, D. M. (2015) Cutting Orientations for Non-Complex Parts in 4th Axis Machining. In: International Manufacturing Engineering Conference 2015 . pp. 1-7.. (Unpublished)

M. Nafis, O. Z. and Case, Keith and Watts, Darren (2014) Cutting Tools in Finishing Operations for CNC Rapid Manufacturing Processes: Simulation Studies. In: Advances in Manufacturing Technology XXVIII: Proceedings of the 12 th International Conference on Manufacturing Research (ICMR2014) , 9-11 September 2014 , Southampton Solent University. pp. 163-168.. ISBN 978-0-9926958-4-2

M. Nafis, O. Z. and Mohamad Hafiz, Mohamad (2018) Development of machining simulation application using visual basic programming in NX CAM system environment. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 73-74.. ISBN 9789672145202

M. S., Shaari and A. K., Ariffin and Akiyuki, Takahashi and M. R. M., Akramin and S., Abdullah and M. N., M. Husnain (2019) Fatigue crack growth prediction using S-version finite element method for AlSi10Mg: an additive manufacturing material. In: 11th International Conference on Numerical Analysis In Engineering (NAE 2019) , 20-22 August 2019 , Bangi, Malaysia. pp. 1-12.. (Unpublished)

M. S. A., Radzak and Ali, Mohammed A. H. and S., Sha'amri and A. R., Azwan (2018) An overview on real-time control schemes for wheeled mobile robot. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 1757-8981

M. S. A., Rahim and I., Ismail and S. A., Wahid and S. N., Aqida (2017) Magnetic Field Simulation of a Thermal Conductivity Measurement Instrument for Magnetorheological Fluid. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01061). ISSN 2261-236X

M. Sawal, A. R. and Ali, Mohammed A. H. and Sha'akmal, S. and Azwan, A. R. A (2018) Review on real-time control schemes for wheeled mobile robot. In: International Conference On Innovative Technology, Engineering And Sciences ICITES 2018 , 1-2 March 2018 , Pekan Campus Library Pekan, Pahang. pp. 1-5.. (Unpublished)

M. Sawal, A. R. and Ali, Mohammed A. H. and Sha’akmal, S. and A. Azwan, A. R. (2018) Design, fabrication and modelling of four-wheeled mobile robot platform with two differential and two caster wheels. In: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 1-7.. (Unpublished)

M. Z., Azir and W. S. W., Harun and K., Kadirgama (2020) A mechanical property evaluation of Ti6Al4V cellular lattice structures fabricated by selective laser melting. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-12., 788 (012010). ISSN 1757-8981 (Print), 1757-899X (Online)

M. Z., Farid and Azmi, W. H. and Zawawi, N. M. M. and R., Mamat and A. I. M., Shaiful (2019) Energy and exergy analysis of compact automotive air conditioning (AAC) system. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012042). ISSN 1757-899X

M. Z. M., Ismail and A. H., Zainal and Nazrul Idzham, Kasim and M. A. F. M., Mukhtar (2019) A mini review: Lean management tools in assembly line at automotive industry. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-12., 469 (012086). ISSN 1757-8981 (Print), 1757-899X (Online)

M.N., Ismail and A. N. M., Rose and N. Z., Mohammed and M. F. F., Ab Rashid (2017) Development of six sigma methodology for CNC milling process improvements. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-15., 257 (1). ISSN 17578981

Ma, Quanjin and Rejab, M. R. M. and Idris, Mat Sahat and Manoj Kumar, Nallapaneni and Abdullah, M. H. and Reddy, Guduru Ramakrishna (2020) Recent 3D and 4D intelligent printing technologies: A comparative review and future perspective. In: Procedia Computer Science; 2019 International Conference on Computational Intelligence and Data Science, ICCIDS 2019 , 6 - 7 September 2019 , Gurugram, India. pp. 1210-1219., 167. ISSN 1877-0509

Madan Varmma, Suparmaniam and A. R., Yusoff (2016) Investigation of Surface Roughness and Tool Wear Length With Varying Combination of Depth of Cut and Feed Rate of Aluminium Alloy and P20 Steel Machining. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-9., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Mahamude, A. S. F. and W. S., W. Harun and K., Kadirgama and D., Ramasamy and Farhana, K. (2021) Cotton waste research follows the effect of pre-treatment and the observation of physical appearance. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. , 1078 (012014). ISSN 1757-899X

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Devarajan, Ramasamy (2021) Numerical Studies of Graphene Hybrid Nanofluids in Flat Plate Solar Collector. In: International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen. pp. 1-6.. ISBN 978-1-6654-1224-7

Mardina, Abdullah and Sabirin, Abdullah and Siti Aminah, Bahari and Asnawi, . and Suparta, Wayan and Ahmad Faizal, Mohd Zain and Kadokura, Akira and Bjornsson, Gunnlaugur (2011) TEC variations at GPS stations over high-latitude and at the equatorial region. In: Proceeding of the 2011 IEEE International Conference on Space Science and Communication (IconSpace) , 12-13 July 2011 , Penang. pp. 121-124. (6015865). ISSN 2165-431X ISBN 978-1-4577-0564-9

Marina, Mohamad and Jeefferie, Abd Razak and Noraiham, Mohamad and Sahrim, Haji Ahmad and Ramli, Junid and Puspitasari, Poppy (2020) A short review on polyurethane-based nanocomposites for various applications. In: IOP Conference Series: Materials Science and Engineering; 2020 International Conference on Sustainable Materials, ICoSM 2020 , 3 September 2020 , Pahang, Virtual. pp. 1-8., 957 (012029). ISSN 1757-8981

Marini, C. D. and Fatchurrohman, Nanang (2018) Microstructure and hardness performance of AA6061 aluminium composite using friction stir processing. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-4.. (Unpublished)

Mas Ayu, Hassan and Sudin, Izman and Rosdi, Daud and A., Shah and Siti Haryani, Tomadi and M. S., Dambatta (2019) Thermal oxidation promotes growth of nanocrystalline diamond on biomedical grade Co Cr mo alloy. In: 4th International Conference on Advances in Manufacturing and Materials Engineering 2019 , 29 Oct-1 Nov. 2019 , Putrajaya, Malaysia. pp. 1-3.. (Unpublished)

Mawarnie, Ismail and Mohd Ruzaimi, Mat Rejab and Siregar, J. P. and Zalinawati, Muhamad and Quanjin, Ma (2020) Tensile properties of hybrid woven glass fibre/PALF reinforced polymer composite. In: Lecture Notes in Mechanical Engineering; 4th International Manufacturing Engineering Conference and 5th Asia Pacific Conference on Manufacturing Systems, iMEC-APCOMS 2019 , 21 - 22 August 2019 , Putrajaya, Malaysia. 448 -454.. ISSN 2195-4356 ISBN 978-981-15-0949-0

Maziyana, Marzuki and Noor Mazni, Ismail and Muhammad Ihsan, Abdul Latiff (2021) Preparation and microstructural characterization of five-layered aluminium-aluminium oxide functionally graded material. In: IOP Conference Series: Materials Science and Engineering; The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 - 23 December 2020 , Pekan, Pahang. pp. 1-9., 1092 (012031). ISSN 1757-899X

Mebrahitom, A. and Nur Amalina, Sabuan and Azmir, Azhari and Zamzuri, Hamedon and Tamiru Alemu, Lemma (2018) Microstructural and process characterization on the electrical conductivity and electrical discharge machinability of Al2O3-based ceramic composites. In: Advanced Energy Materials (AEM2018) Conference , 10 - 12 September 2018 , University of Surrey, England. p. 1.. (Unpublished)

Mebrahitom, A. and Rizuan, D. and Azmir, Azhari and M., Nassif (2016) Effect of High-Speed Milling Tool Path Strategies on the Surface Roughness of Stavax ESR Mold Insert Machining. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-6., 114. ISSN 757-8981 (print); 1757-899X (online)

Mebrahitom, A. and Seow , Xiang and Azmir, Azhari and Tamiru, A. (2017) Remaining Tool Life Prediction Based On Force Sensors Signals During End Milling Of Stavax ESR Tool Steel. In: International Mechanical Engineering Congress and Exposition (IMECE) , 3-9 November 2017 , Swiss Garden Hotel, Balok, Kuantan, Pahang. pp. 1-7.. ISBN 9780791858356

Mohamad, Hafiz and M. Nafis, O. Z. (2019) Investigation of the correlation between radial depth of cut (RDOC) and axial depth of cut (ADOC) using NX CAM system: simulation studies. In: Engineering Applications Of Artificial Intelligence Conference 2018 (EAAIC 2018) , 2-6 December 2018 , Sutera Harbour Resort, Sabah, Malaysia. pp. 1-6., 255. ISSN 2261-236X

Mohamad Hafiz, Mohamad and M. Nafis, O. Z. (2018) Investigation of roughing machining simulation by using visual basic programming in NX CAM system. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981

Mohamad Radzi, Mohd Sojak and Mohd Azraai, Mohd Razman and Anwar, P. P. Abdul Majeed and Rabiu Muazu, Musa and Ahmad Shahrizan, Abdul Ghani and Ismed, Iskandar (2018) The identification of oreochromis niloticus feeding behaviour through the integration of photoelectric sensor and logistic regression classifier. In: The 6th International Conference On Robotics Intelligence And Applications 2018 , 15-19 Disember 2018 , Putrajaya, Malaysia. pp. 1-7.. (Unpublished)

Mohamad Rusydi, Mohamad Yasin and S. N. A., Abdul Razak (2021) Effect of high temperature solution heat treatment time on quality index and morphology of A356 DC alloy. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1924-1928., 48. ISSN 2214-7853

Mohamad Syazwan, Mohd Zin and M. N., Abdul Rani and M. A., Yunus and W. I. I., Wan Iskandar Mirza and M. S. M., Sani (2019) Experimental modal analysis procedure for a laser spot welded hat-plate structure. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfor , 7 March 2019 , Selangor, Malaysia. pp. 1-9., 1262 (012015). ISSN 1742-6588 (print); 1742-6596 (online)

Mohammed Hamood Hezam, Alshameri and Oumer, Ahmed Nurye and Azizuddin, Abd Aziz (2021) Novel compact fin and tube heat exchanger made of reinforced composite plate fins. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Mohd Ali Hanafiah, Shaharudin and A. R., Yusoff (2023) Experimental and Simulation Approach; Investigation Effect of Axial Feed Rate to the Cutting Force in Dimple Milling Using Ball End Mill Tool. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 33-50.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Mohd Azlan, Zulkarnain and Mohamad Khadri, Shahriman and Ahmmad Shukrie, Md Yudin (2019) Drying characteristics of cocoa bean in a swirling fluidized bed dryer: an experimental study. In: UTP-UMP-UAF Symposium on energy system 2019 (SES2019) , 1-2 Oct. 2019 , UMP Library. pp. 1-10.. (Unpublished)

Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff and M. F. F., Ab Rashid (2014) Optimizing Hysteresis Parameters Of Magneto-Rheological Fluid Damper Using Particle Swarm Optimization. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-10.. (Unpublished)

Mohd Azri Hizami, Rasid and Muhammad Nor Azril, Zulkafli and Daing Mohamad Nafiz, Daing Idris and Nurul Fatimah, Abdullah (2022) Experimental evaluation of temperature distribution in armature of a brushed dc machine using thermal imaging. In: 2022 International Conference on Electrical Machines, ICEM 2022 , 5-8 September 2022 , Valencia. pp. 1927-1933. (183486). ISBN 978-166541432-6

Mohd Bijarimi, Mat Piah and Sahrim, Ahmad and Rozaidi, Rasid (2012) Mechanical, Thermal and Morphological Properties of PLA/PP Melt Blends. In: International Conference on Agriculture, Chemical And Environmental Sciences 2012 (ICACES 2012) , 6-7 October 2012 , Dubai, United Arab Emirates. pp. 115-117..

Mohd Fadzil, Abdul Rahim and A. A., Jaafar and R., Mamat and Zahari, Taha (2020) Parametric study of CNG-DI engine operational parameters by using analytical vehicle model. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 611-616.. ISBN 978-981-15-0950-6

Mohd Fadzil Faisae, Ab. Rashid (2021) A novel tiki-taka algorithm for engineering optimisation. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Mohd Fawzi, Zamri and A. R., Yusoff (2018) Effect of rake angle and feed rate on chip segmentation in machining carbon steel 1050. In: 9th International Conference on Manufacturing Science and Technology 2018 , 11 - 13 Aug 2018 , Kuala Lumpur. pp. 1-7.. (Unpublished)

Mohd Ghazali, Maarof and Sorooshian, Shahryar and Suhaila, Abdul Hamid (2017) What drives a successful Kaizen implementation? An insight from Malaysian automotive manufacturers. In: 7th Annual Conference on Industrial Engineering and Operations Management, IEOM 2017 , 11-13 April 2017 , Hotel Sofitel Rabat Jardin des RosesRabat; Morocco. pp. 983-984.. ISSN 2169-8767 ISBN 978-098554976-3

Mohd Hafiz, Burhan and Nik Hisyamudin, Muhd Nor and Mogan, Yarwindran and Mustaffa, Ibrahim and Mohd Fahrul, Hassan and Mohd Azwir, Azlan and Faiz, Mohd Turan and Kartina, Johan (2017) Designing an Orthotic Insole by Using Kinect® XBOX Gaming Sensor Scanner and Computer Aided Engineering Software. In: 3rd and 4th International Engineering Research and Innovation Symposium, IRIS 2017 , 6–7 May 2017 , Melaka, Malaysia. pp. 1-9., 226 (012026). ISSN 1757-8981 (Print); 1757-899X (Online)

Mohd Hafiza, Abdul Kadir and Gebremariam, Mebrahitom Asmelash and Azmir, Azhari (2021) Investigation on welding distortion in stainless steel sheet using gas tungsten arc welding process. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1674-1679., 46 (Part 4). ISSN 2214-7853

Mohd Hasnun Ariff, Hassan and Zahari, Taha (2018) The effect of spin and friction on reaction forces in a soccer ball impact: A computational study. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 87-88.. ISBN 9789672145202

Mohd Jamil Mohamed, Mokhtarudin and Mohamad Fairul, Hubakri and Mohd Amirul Syafiq, Zamri and Mohd Noor Akmal, Hamzah and Rabiatul Adawiyah, Roslan (2021) Design and development of test rig for PIV fluid flow experiment for biomedical engineering application. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Mohd Khairuddin, Ismail and Shahrul Na’im, Sidek and Anwar, P. P. Abdul Majeed and Asmarani, Ahmad Puzi and Hazlina, Md Yusof (2020) A hybrid automata framework for an adaptive impedance control of a robot-assisted training system. In: RITA 2018: Proceedings of the 6th International Conference on Robot Intelligence Technology and Applications , 16-18 December 2018 , Putrajaya, Malaysia. pp. 257-265., 113. ISBN 978-981-13-8323-6

Mohd Mawardi, Saari and Mohd Herwan, Sulaiman and Nurul Akmal, Che Lah and Mohd Razali, Daud and Kiwa, Toshihiko (2023) Non-regularized reconstruction of magnetic moment distribution of magnetic nanoparticles using barnacles mating optimizer. In: Proceedings of 2023 International Conference on System Science and Engineering, ICSSE 2023 , 27-28 August 2023 , Virtual, Ho Chi Minh City. pp. 533-536. (192135). ISBN 979-835032294-1

Mohd Mawardi, Saari and Nazatul Shareena, Suhaimi and M. H., Sulaiman and Nurul Akmal, Che Lah and Kenji, Sakai and Toshihiko, Kiwa and Keiji, Tsukada (2018) Dynamic magnetization of thermally blocked iron oxide nanoparticles characterized by a sensitive AC magnetometer using a resonant excitation coil. In: 6th Edition of International Conference On Superconductivity and Magnetism (ICSM2018) , 29 April - 4 May 2018 , Premier Palace Hotel Beldibi, Antalya, Turkey. pp. 1-11.. (Unpublished)

Mohd Nazir, Mat Nawi and Hafiz, Husin and Gebremariam, M. A. and Azmir, Azhari (2020) Investigation on the Effect of Multiple Passes in Plain Waterjet Cleaning of Paint. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 537-543.. ISBN 978-981-15-0949-0

Mohd Rahimi, Ramli and Norasiah, Abd Razak and Izwan, Ismail and Ahmad Shahir, Jamaludin and Ahmad Rosli, Abdul Manaf (2021) Effect of Dimple Size onto Wear Rate of Mild Steel AISI 1060 Surface. In: The 7th International Conference and Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM 2021) , 23 November 2021 , Virtual Conference. pp. 1-4..

Mohd Sahril, Mohd Fouzi and M. S. M., Sani and M. F. R., Ishak (2019) Identification dynamic behaviour of disc brake based on finite element model updating approach. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012006). ISSN 1742-6588 (print); 1742-6596 (online)

Mohd Saifuldin, Mohd Mokhtar and A. R., Yusoff (2023) Effect of Machining Parameters on Surface Quality of Aluminium Puncher for Microchannel Fabrication Using Micro Cutting Process. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 11-20.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Mohd Syahidan, Kamarudin and Mohd Zaidi, Sidek (2015) Line Balancing Analysis of a Multi-Products Processing with a Single Type of Supply. In: Proceedings of International Conference on Knowledge Transfer (ICKT'15) , 1-3 December 2015 , Putrajaya Marriott Hotel, Malaysia. pp. 25-30.. ISBN 978-967-394-255-8

Mohd Yazid, Abu and E. E., Mohd Nor and M. S., Abd Rahman (2018) Costing improvement of remanufacturing crankshaft by integrating Mahalanobis-Taguchi System and Activity based Costing. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-10., 342 (012006). ISSN 1757-899X

Mohd Yazid, Abu and F.L.M., Safeiee (2020) Optimization using Mahalanobis-Taguchi System for inductor component. In: Journal of Physics: Conference Series, The 2nd Joint International Conference on Emerging Computing Technology and Sports (JICETS 2019) , 25-27 November 2019 , Bandung, Indonesia. pp. 1-7., 1529 (052045). ISSN 1742-6588

Mohd Yazid, Abu and Filzah Lina, Mohd Safeiee and Nik Nurharyantie, Nik Mohd Kamil and Nurul Farahin, Zamrud (2019) Exploring beneficial of Mahalanobis Taguchi Method on production environment. In: The 4th International Conference on Engineering Technology 2019 (ICET 2019) , 6-7 July 2019 , TATI University of College, Terengganu. pp. 1-6.. (In Press / Online First)

Mohd Yazid, Abu and Nik Nurharyantie, Nik Mohd Kamil and Nurul Farahin, Zamrud and Filzah Lina, Mohd Safeiee and Muchamad, Oktaviandri (2019) A review on the integration of mahalanobis-taguchi system and time-driven activity-based costing on production environment. In: 4th International Conference on Engineering Technology (ICET 2019) , 6-7 July 2019 , DITC, Kemaman, Terengganu. pp. 1-6.. (In Press / Online First)

Mohd Yazid, Abu and Norizan, N. S. and M. S., Abd Rahman (2018) Integration of Mahalanobis-Taguchi system and traditional cost accounting for remanufacturing crankshaft. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-9., 342 (012005). ISSN 1757-899X

Mohd Yazid, Abu and S K M, Saad and M H M, Razali and F, Ramlie and N, Harudin and W Z A, W Muhamad and R, Dolah (2021) Optimizing the MFlex monitoring system using Mahalanobis-Taguchi system. In: The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , Pekan Pahang , 22-23 December 2020. pp. 1-10.. ISSN 1757-8981 (Print); 1757-899X (Online)

Mohd Yazid, Abu and S N A M, Zaini (2021) Comparative study between product- and service-based operations using time-driven activity-based costing. In: The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , Pekan Pahang , 22-23 December 2020. pp. 1-8.. ISSN 1757-8981 (Print); 1757-899X (Online)

Mohd Yazid, Abu and S.N.A.M., Zaini (2020) Development a new costing structure for palm oil industry using time driven activity based costing. In: 2nd Joint International Conference on Emerging Computing Technology and Sports, JICETS 2019 , 25-27 November 2019 , Bandung; Indonesia. pp. 1-7., 1529 (5). ISSN 1742-6588

Mohd Zaidi, Mohd Tumari and Wan Norhisyam, Abd Rashid and Ab Wafi, Ab Aziz and Shahrizal, Saat and Mohd Helmi, Suid (2018) The control scheme of vehicle steer by wire system by using hybrid single input fuzzy logic controller and PID controller. In: 5th Mechanical Engineering Research Day (MERD'18) , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 1-2.. ISBN 9789672145202

Mohd Zaidi, Sidek and Syahidan, Kamaruddin (2016) Experimental and Numerical Analysis of Metal Radiated by an Infra-Red Heater. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015 , 11-13 October 2015 , Johor Bahru, Johor, Malaysia. .

Muhamad Arif, Abdullah and M. F. F., Ab. Rashid and Z., Ghazalli and N. M. Z., Nik Mohamed and A. N., Mohd Rose (2018) Modelling of Assembly Sequence Planning Problem using Base Part Concept. In: AIP Conference Proceedings: Proceedings of the 4th International Conference on Green Design and Manufacture 2018 , 29-30 April 2018 , Ho Chi Minh, Vietnam. pp. 1-6., 2030 (020013). ISBN 978-0-7354-1752-6

Muhamad Arifpin, Mansor and L. H., Shah and Hazami, Che Hussain (2012) Maintenance Performance of Malaysia's Automotive Sector: A Case Study. In: Proceedings of International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 271-275..

Muhamad Izdhar, Zaki and Saptaji, Kushendarsyah and Ramdan, R. D. and Kurniawan, Tedi (2019) Fabrication of micro dimples pattern using ball end mill. In: IOP Conference Series: Materials Science and Engineering, International Conference on Design and Application of Engineering Materials (IC-DAEM) in conjunction with Seminar Nasional Metalurgi dan Material XI (SENAMM) , 6-7 September 2018 , Bandung, Indonesia. pp. 1-8., 547 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhamad Magffierah, Razali and M. F. F., Ab Rashid and Muhammad Razif, Abdullah Make (2016) Mathematical Modelling of Mixed-Model Assembly Line Balancing Problem with Resources Constraints. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-10., 012002 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhammad, Aisha and Ali, Mohammed A. H. and Shanono, Ibrahim Haruna (2019) Fatigue and harmonic analysis of a diesel engine Crankshaft using ANSYS. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 371-376.. ISBN 978-981-15-0950-6

Muhammad, Aisha and Ali, Mohammed A. H. and Shanono, Ibrahim Haruna and Abdullah, Nor Rul Hasma (2021) Analysis of a 440C steel roller bearing using finite element method. In: Materials Today: Proceedings; 11th International Conference on Materials Processing and Characterization , 15 - 17 December 2020 , Indore, India. pp. 1750-1754., 44. ISSN 2214-7853

Muhammad, Aisha and Ali, Mohammed A. H. and Shanono, Ibrahim Haruna and Abdullah, Nor Rul Hasma (2021) A systematic and bibliometric analysis on 3D printing published in scientific citation index-expanded indexed journals between 1999 and 2019. In: Materials Today: Proceedings; 11th International Conference on Materials Processing and Characterization , 15 - 17 December 2020 , Indore, India. pp. 1739-1743., 44 (168673). ISSN 2214-7853

Muhammad, Aisha and Shanono, Ibrahim Haruna (2019) Simulation of a Car crash using ANSYS. In: 2019 15th International Conference on Electronics, Computer and Computation, ICECCO 2019; 15th International Conference on Electronics, Computer and Computation, ICECCO 2019 , 10-12 December 2019 , Abuja. pp. 1-5. (9043275). ISSN 978-172815160-1

Muhammad Aizzat, Zakaria and Anwar, P. P. Abdul Majeed and Zahari, Taha and M. M., Alim and Baarath, K. (2018) Forward and inverse predictive model for the trajectory tracking control of a lower limb exoskeleton for gait rehabilitation: simulation modelling analysis. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Muhammad Asyraf, Abdullah and Siti Rabiatull Aisha, Idris (2023) Effect of Sn-xCu Solder Alloy onto Intermetallic Formation After Laser Soldering. In: Technological Advancement in Mechanical and Automotive Engineering: ICMER 2021 , 26-27 October 2021 , Virtual Conference, Universiti Malaysia Pahang. pp. 869-880.. ISBN 978-981-19-1457-7

Muhammad Faez, Mohamad Tajudin and Asnul Hadi, Ahmad and Juliawati, Alias and Nur Azhani, Abd Razak and Nasrul Azuan, Alang (2024) The Effects of Different Cooling Rate Conditions on the Thermal Profile and Microstructure of Al-Si Alloy with Magnesium Addition. In: AIP Conference Proceedings. The 5th International Conference on Automotive Innovation & Green Energy Vehicle 2022 , 5-6 December 2022 , Langkawi, Malaysia. pp. 1-9., 2998 (060002). ISBN 978-0-7354-4793-6

Muhammad Fahmi Izuwan, . and Ahmad Redza, Ahmad Mokhtar and Mohd Nizar, Mhd Razali (2020) Study on operational characteristic of microwave oven driven plasma spray device. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 558-563.. ISBN 978-981-15-0950-6

Muhammad Haziq, Mohd Rasid and Noor Liza, Simon and Asrul, Adam (2020) Using neural network with random weights and mutual information for systolic peaks classification of PPG signals. In: ICBET 2020: Proceedings of the 2020 10th International Conference on Biomedical Engineering and Technology , September 2020 , Tokyo, Japan. pp. 276-283.. ISBN 978-1-4503-7724-9

Muhammad Naqiuddin, Mat Salleh and M., Ishak and M. H., Aiman and Q., Zaifuddin (2019) The effect of laser surface hardening on surface hardness of mild steel. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-7.. (Unpublished)

Muhammad Nur Aiman, Shapiee and Muhammad Ar Rahim, Ibrahim and Mohd Azraai, M. Razman and Muhammad Amirul, Abdullah and Musa, Rabiu Muazu and Mohd Hasnun Ariff, Hassan and A. P. P., Abdul Majeed (2019) The classification of skateboarding trick manoeuvres through the integration of image processing techniques and machine learning. In: 5th International Conference on Electrical, Control and Computer Engineering (INECCE 2019) , 29-30 July 2019 , Swiss Garden Kuantan. pp. 1-7.. (Unpublished)

Muhammad Rafsanjani, Basri and Fahmi, Samsuri (2022) Design and analysis of an early heart attack detection using openCV. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 163..

Muhammad Razif, Abdullah Make and M. F. F., Ab Rashid and Muhamad Magffierah, Razali (2016) Modelling of Two-sided Assembly Line Balancing Problem with Resource Constraints. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-9., 160 (012005). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhammad Shabir, Shaharudin and Fernando, Yudi and Ganesan, Yuvaraj and Shamil, Abu Hassan (2021) Carbon trading system : Model and application for low carbon performance matrix and sustainable development goals alignment. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Muhammad Zuhairi, Azharudin and Norazlianie, Sazali (2023) Investigation of Monitoring Electrical Consumption on Load Using IoT. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 115-121.. ISSN 2195-4356 ISBN 978-981-99-1244-5 (In Press / Online First)

Muhammed Nafis, Osman Zahid and Muhammad Zulhilmi, Shamsul Amran (2023) Optimization of the Automotive Manufacturing Plant Using Systematic Layout Planning (SLP) with Modular Layout. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 401-410.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Mujahid, Mohamad and Muhammad Sharfi, Najib and Saiful Nizam, Tajuddin and Suhaimi, Mohd Daud and Nur Farina, Hamidon Majid and Suziyanti, Zaib and Muhamad Faruqi, Zahari kNN: Classification of agarwood types in oil and wooden using E-nose. In: The 6th International Conference on Electrical, Control and Computer Engineering (InECCE2021) , 23rd August 2021 , Microsoft Teams platform. pp. 1-15.. (Unpublished)

Munira, Halili and Fernando, Yudi (2019) A reflection of local supplier development towards sustainable social supply chain. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 726-735.. ISSN 2518-668X

Murthy, Puhanes and Nurul Akmal, Che Lah (2022) The optical and structural of the synthesised cu nanostructure using hydrothermal microwave-assisted method. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 97..

Musa, Rabiu Muazu and Afrouzeh, Mohsen and Suppiah, Pathmanathan K. and Abdul Majeed, Anwar P. P. and Afroozeh, Mohammad Sadegh and Mohamad Razali, Abdullah (2022) The application of modified equipment in retention of motor task performance amongst children of low and high working memory capacity. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 931-939., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Musfirah, Abdul Hadi and Jaharah, A. Ghani (2020) Enhancement of surface integrity in cryogenic high speed ball nose end milling process of inconel 718. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 512-518.. ISBN 978-981-15-0950-6

Muthanna , Jamil and Noraini, Mohd Razali (2016) Simulation of Assembly Line Balancing in Automotive Component Manufacturing. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

N., Abdul Rahman and M. F. F., Ab Rashid (2024) Modeling of Optimizing Multi-hole Drilling Toolpath Distance with Multiple Tool Dimension. In: Journal of Physics: Conference Series. 7th International Conference on Mechanical Engineering Research 2023 (ICMER 2023) , 12-13 September 2023 , AC Marriot Hotel, Kuantan, Pahang. , 2688 (012001). ISSN 1742-6596

N., Abdul Wahab and Fatchurrohman, Nanang and Z., Zulkfli (2021) Investigation on the effect of different friction stir machining tools shape on the mechanical properties of magnesium alloy work piece. In: IOP Conference Series: Earth and Environmental Science; 9th Engineering International Conference, EIC 2020 , 24 September 2020 , Semarang, Indonesia. pp. 1-9., 700 (1). ISSN 1755-1307

N., Abdullah and Jaafar, Jamiluddin and Hagos, F. Y. and Azri, Alias and N. S. N., Azmi (2019) Experimental investigation of pineapple leaf fiber as biomass fuel for renewable energy resource. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

N., Jamil and A. R., Yusoff (2018) Kurtosis quantification of different minimal quantity lubrication effects in machining cast iron with coated and uncoated tool. In: 6th Asia International Conference On Tribology , 17 - 20 Sept 2018 , Kuching, Sarawak. pp. 1-2.. (Unpublished)

N., Sazali and H., Ibrahim and A. S., Jamaludin and M. A., Mohamed and W. N. W., Salleh and M. N. Z., Abidin (2020) Degradation and stability of polymer: A mini review. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-16., 788 (012048). ISSN 1757-8981 (Print), 1757-899X (Online)

N., Sazali and H., Ibrahim and A. S., Jamaludin and M. A., Mohamed and W. N. W., Salleh and M. N. Z., Abidin (2020) A short review on polymeric materials concerning degradable polymers. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-15., 788 (012047). ISSN 1757-8981 (Print), 1757-899X (Online)

N. A., Azlan and Nafrizuan, Mat Yahya (2019) Modified adaptive bats sonar algorithm with doppler effect mechanism for solving single objective unconstrained optimization problems. In: 15th IEEE Colloquium On Signal Processing And Its Application (CSPA2019) , 8-9 March 2019 , Penang, Malaysia. pp. 27-30.. ISBN 978-1-5386-7563-2

N. A., Mutalib and I., Ismail and S. M., Soffie and S. N., Aqida (2019) Magnetorheological finishing on metal surface: a review. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012092). ISSN 1757-899X

N. H., Kamarudin and M. F. F., Ab Rashid (2017) Modelling of Simple Assembly Line Balancing Problem Type 1 (SALBP-1) with Machine and Worker Constraints. In: International Postgraduate Conference On Engineering, Science & Technology (GUEST2017) , 15-18 October 2017 , Universiti Tun Hussein Onn Malaysia., Johor. pp. 1-10.. (Unpublished)

N. H., Othman and M., Ishak and L. H., Shah (2017) Effect of shoulder to pin ratio on magnesium alloy Friction Stir Welding. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-9., 238 (1). ISSN 17578981

N. M., Kusaseh and Nuruzzaman, D. M. and Noor Mazni, Ismail and Zamzuri, Hamedon and Azmir, Azhari and Iqbal, AKM Asif (2018) Flexure and impact properties of glass fiber reinforced nylon 6-polypropylene composites. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

N. M., Maliessa and S. R. A., Idris (2023) Microwave hybrid heating as an alternative method for soldering—A brief review. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 565-577.. ISSN 2195-4356 ISBN 978-981191456-0

N. W., Z. Abidin and N., Salim and M. F. F., Ab Rashid and N. M. Zuki, N. M. and Ahmad Nasser, Mohd Rose and Ahmad Redza, Ahmad Mokhtar (2022) Experimental of multi-holes drilling toolpath using particle swarm optimization and CAD-CAM software on PCB. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 197-204., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Nabiilah, Ab Rahim and Zamzuri, Hamedon and Faiz, Mohd Turan and Ismed, Iskandar (2016) Reducing Bits in Electrodeposition Process of Commercial Vehicle - A Case Study. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Nabil Zhafri, Mohd Nasir and Muhammad Aizzat, Zakaria and Saifudin, Razali and Mohd Yazid, Abu (2017) Autonomous Mobile Robot Localization using Kalman Filter. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01069). ISSN 2261-236X

Nafrizuan, Mat Yahya and M. Nafis, O. Z. (2018) Work-related musculoskeletal disorders (WMDs) risk assessment at core assembly production of electronic components manufacturing company. In: 3th International Manufacturing Engineering Conference 2017 (IMEC 2017) , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (012036).

Nafrizuan, Mat Yahya and Nur Iffah, Mohamed Azmi (2023) PSO-LFDE Algorithm on Constrained Real-Parameter Optimisation Test Functions. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 559-568.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Nafrizuan, Mat Yahya and Nurainaa, Elias and Muhammad Hazim, Mohd Nordin (2022) A comparison of type 1 and type 2 fuzzy logic controller for DC motor system. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 125-133., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Nagilla, Dheeraj Kumar and V. V., Tyagi and Kumaran, Kadirgama and K., Chopra and A. K., Pandey and Kothari, Richa (2021) Application of phase change materials in solar water heating systems for thermal energy storage. In: IOP Conference Series: Materials Science and Engineering, International Scientific Forum (ISF 2019) , 16-17 December 2019 , Melaka, Malaysia. pp. 1-11., 1127 (012012). ISSN 1757-899X

Nalliah, Nivishan and Abd Anasghaneem, Abd Aziz and Juliawati, Alias and Nasrul Azuan, Alang (2021) Design and development of motorbike roof shield for delivery service. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Naqib Hakim, Kamarudin and Mebrahitom, A. and Azmir, Azhari (2017) Assembly meshing of abrasive waterjet nozzle erosion simulation. In: IOP Conference Series: Materials Science and Engineering, International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017) , 8-9 August 2017 , Kuala Lumpur, Malaysia. pp. 1-8., 290 (012069). ISSN 1757-899X

Naqibah, Azman and Nik Hisyamudin, Muhd Nor and Mohd Fahrul, Hassan and Saifulnizan, Jamian and Muhammad Hanif, Abd Rashid and Badrul, Omar and Siti Zarina, Mohd Muji and Fariza, Mohamad and Mohd Fauzi, Ahmad and Faiz, Mohd Turan and Elmi, Abu Bakar (2017) Review on Design for Medical Device. In: MATEC Web of Conferences: 8th International Conference on Mechanical and Manufacturing Engineering 2017 (ICME’17) , 22-23 July 2017 , Langkawi, Malaysia. pp. 1-10., 135 (00020). ISSN 2261-236X

Narayanan, T. and Jeefferie, Abd Razak and Intan Sharhida, Othman and Noraiham, Mohamad and Mohd Edeerozey, Abd Manaf and Mazlin Aida, Mahamood and Hazman, Hasib and Mohd Muzafar, Ismail and Ramli, Junid (2019) Tensile, flexural and fracture morphological properties of recycled polypropylene (rPP) filled dried banana leaves fibre (DBLF) composites: Effects of DBLF loadings. In: Advances in Material Sciences and Engineering , 14-15 November 2018 , Melaka, Malaysia. pp. 609-618.. ISSN 2195-4356 ISBN 978-981-13-8297-0

Nasrul Azuan, Alang and N., Ab Razak (2019) Application of ductility exhaustion based damage model to predict creep rupture time of grade 92 steel. In: IOP Conference Series: Materials Science and Engineering, 6th International Conference on Applications and Design in Mechanical Engineering , 26-27 August 2019 , Pulau Pinang, Malaysia. pp. 1-7., 670 (012001). ISSN 1757-899X

Nawanir, Gusman and Binalialhajj, Mohammed and Lim, Kong Teong and Mohd Hanafiah, Ahmad (2019) Becoming lean: the way towards sustainability of higher educations institutions. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 603-626., 2019. ISSN 2518-668X

Nazrin, Mokhtar and Asmelash, Mebrahitom and Saptaji, Kushendarsyah and Azmir, Azhari (2023) Surface Roughness Analysis on Sheet Metals During AWJ Machining Using Low Pressure. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 59-64.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Nazrin, Mokhtar and Gebremariam, M.A. and Mohd Hafizi, Zohari and Azmir, Azhari (2018) Analysis of acoustic emission during abrasive waterjet machining of sheet metals. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 17578981

Nelfiyanti, . and Nik Mohamed Zaki, Nik Mohd Nasir and Ab Rashid, Mohd Fadzil Faisae (2022) Integration of QRM and ergonomics in the design of a framework in identification complaints among automotive assembly line workers. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 38..

Ng Liang, Shing (2014) Part Time "Gardeners as "Nuclei of Sustainable Communities". In: National Urban Horticulture Conference , 16 April 2014 , Johor Bahru. pp. 3-7..

Ng Liang, Shing and Corbin, Champion (2015) The One Universal Graph – a Free and Open Graph Database. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

Ng Liang, Shing and J. S., Sak and R., Dhinesh (2015) Low Cost Night Vision System for Intruder Detection. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

Ng Liang, Shing and K. O., Tan and T. H., Clement and T. H. , Lai and S. K., Ng (2015) Open Source Hardware and Software Platform for Robotics and Artificial Intelligence. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

Nik Nurharyantie, Nik Mohd Kamil and Mohd Yazid, Abu and Nurul Farahin, Zamrud and Filzah Lina, Mohd Safeiee (2020) Analysis of Magnetic Component Manufacturing Cost Through the Application of Time-Driven Activity-Based Costing. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 74-80.. ISBN 978-981-15-0950-6

Nik Nurharyantie, Nik Mohd Kamil and Mohd Yazid, Abu and Nurul Farahin, Zamrud and Filzah Lina, Mohd Safeiee (2020) Proposing of Mahalanobis-Taguchi System and Time-Driven Activity-Based Costing on Magnetic Component of Electrical & Electronic Industry. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 108-114.. ISBN 978-981-15-0950-6

Nik Nurharyantie, Nik Mohd Kamil and Mohd Yazid, Abu and Nurul Farahin, Zamrud and Filzah Lina, Mohd Safeiee and Muchamad, Oktaviandri (2019) Application of mahalanobis-taguchi system on electrical & electronic industry. In: 4th International Conference on Engineering Technology (ICET 2019) , 6-7 July 2019 , DITC, Kemaman, Terengganu. pp. 1-6.. (In Press / Online First)

Nik Nurjihan Nisrina, Nik Zaid and Norazlianie, Sazali (2023) Investigation of IoT Devices for Fire Alarm Detection Systems Using Raspberry Pi. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 123-129.. ISSN 2195-4356 ISBN 978-981-99-1244-5 (In Press / Online First)

Nik Ruqiyah, Nik Hassan and Noor Mazni, Ismail and Dewan Muhammad, Nuruzzaman and Noraini, Mohd Razali and Suriati, Ghazali (2019) The effect of MAPE compatibilizer agent on the tensile strength of recycled PET/HDPE plastic composite. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 484-489.. ISBN 978-981-15-0950-6

Nik Ruqiyah, Nik Hassan and Noor Mazni, Ismail and Suriati, Ghazali and Nuruzzaman, D. M. (2018) Thermal properties of polyethylene reinforced with recycled– poly (ethylene terephthalate) flakes. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-6., 342 (1). ISSN 17578981

Noor Aishah, Kamarudin and Mohamad Razali, Abdullah and Eswaramoorthi, Vijayamurugan and Ahmad Bisyri Husin Musawi, Maliki and Aina Munirah, Ab Rasid and Abdul Majeed, Anwar P. P. and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu (2022) A cluster analysis of identifying team and individual sports athlete based on anthropometric, health and skill related components. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 561-570., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Noor Sarbani, Wan Muhammad and Shariman, Mustafa and Syed Radzi, Rahamaddulla and S. A., Che Ghani and Anwaruddin, Hisyam (2016) Technical and Economic Feasibility Study of Coconut Shell Charcoal Production as precursor to Activated Carbon in East Coast Malaysia. In: Advances in Business Research International Conference (ABRIC2016) , 16-17 November 2016 , Langkawi, Malaysia. pp. 1-11.. (Unpublished)

Nor Azlina, Ab. Aziz and Marizan, Mubin and Zuwairie, Ibrahim and Norrima, Mokhtar and Nor Hidayati, Abdul Aziz and Mohd Ibrahim, Shapiai (2019) A fitness-based adaptive synchronous-asynchronous switching in simulated kalman filter optimizer. In: International Conference on Computer and Information Sciences, ICCIS 2019 , 3 - 4 April 2019 , Jouf University, Aljouf, Kingdom of Saudi Arabia. pp. 1-5.. ISBN 978-153868125-1

Nor Azlina, Ab. Aziz Nor and Hidayati, Abdul Aziz and Aminurafiuddin, Zulkifli and Zuwairie, Ibrahim and Tasiransurini, Ab. Rahman (2018) Is gravitational search algorithm's initial gravitational constant a function dependent parameter? In: ACM International Conference Proceeding Series: International Conference on E-Business and Mobile Commerce (ICEMC 2018) , 21-23 May 2018 , Chengdu, China. pp. 60-66.. ISBN 978-145036430-0

Nor Rokiah Hanum, Md. Haron and Iman Haddad Qaisara Dhia, Mohd Mahzan (2019) Ethics in procurement: A case study in a logistic company. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 930-942., 2019. ISSN 2518-668X

Noraini, Mohd Razali and Geraghty, John (2011) Genetic Algorithm Performance with Different Selection Strategies in Solving TSP. In: The 2011 International Conference of Computational Intelligence and Intelligent Systems , 6-8 July, 2011 , Imperial College, London. .

Noraini, Mohd Razali and Mohd Nizam A., Rahman (2020) Value stream mapping – a tool to detect and reduce waste for a lean manufacturing system. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 266-271.. ISBN 978-981-15-0950-6

Noraini, Mohd Razali and Siti Murni, Mohamad Khadri and Ee, Toh Con (2018) Six sigma approach to improve stripping quality of automotive electronics component - A case study. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Noraishah, Mohamad Noor and Muhammad Nashrur Faizzi, Abdul Razak and A. R., Yusoff (2020) Finite Element Analysis of Baseplate for Failure Estimation in Light Railway Transit Fastening Systems. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 505-511.. ISBN 978-981-15-0950-6

Norasmiza, Mohd and Zubair, Khalil (2020) Eco design for rooftop in urban housing. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 531-536.. ISBN 978-981-15-0950-6

Norazlianie, Sazali and A. S., Jamaludin and Mohd Rusllim, Mohamed and W. N., W. Salleh (2019) Degradation and stability of polymer: A brief review. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-13.. (Unpublished)

Norazlianie, Sazali and Asogan, Arjun (2021) Modified ghee/clarified butter composition for food technology. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Norazlianie, Sazali and Mohd Syafiq, Sharip and Haziqatulhanis, Ibrahim and Ahmad Shahir, Jamaludin and Wan Norharyati, Wan Salleh (2020) Fabrication of carbon molecular sieve (CMS)-based membranes: a review. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-7., 788 (012036). ISSN 1757-8981 (Print), 1757-899X (Online)

Norazlianie, Sazali and Mohd Syafiq, Yusoff and Ihsan Naiman, Ibrahim and Haziqatulhanis, Ibrahim and Mohd Nizar, Mhd Razali and Wan Norharyati, Wan Salleh (2019) Dip-coating methods for carbon membrane fabrication: Effects of coating-carbonization-cycles on Hydrogen separation prepared from BTDA-TDI/MDI (P-84) polyimide blends with Nanocrystalline cellulose (NCC). In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 384-389.. ISBN 978-981-15-0950-6

Norazlianie, Sazali and Ummu Kulthum, Jamaludin and W. N., W. Salleh (2019) Brief review on polymeric materials concerning degradable polymers. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-14.. (Unpublished)

Norazwina, Zainol and Nur izaty Ak'ma, Abu Hassan As'ari and Mohamad Shaiful, Abdul Karim and Nur Shahira, Mat Hussain (2021) Cellulose extraction from pineapple leaves to produce dielectric materials. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Norfazilasari, Yasman and Raja Murfiqah, Raja Mohd Fouzy and Mohd Zairulnizam, Mohd Zawawi (2023) Direct fabrication of glass microfluidic channel using CO2 laser. In: Materials Today: Proceedings. 2nd International Symposium on Advanced Functional Materials , Feb 16, 2023 - Feb 16, 2023 , Kuala Lumpur, Malaysia. . ISSN 2214-7853 (In Press / Online First)

Norfazillah, Talib and Nur Fatin Amira, Mohd Sukor and Ainaa Mardhiah, Sabri and Haslina, Abdullah and Amiril Sahab, Abdul Sani (2022) Experimental study on physical properties of modified jatropha oilbased nanofluids for machining purposes. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1831-1835., 48 (176050). ISSN 2214-7853

Norhafizah Suhada, Abdullah and Siti Humairah, Kamarul Bahrain and Nur Aini Sabrin, Manssor and Anwar, P. P. Abdul Majeed and Jamaluddin, Mahmud (2020) Compressive and viscoelastic behavior of arenga pinnata-silicone biocomposite. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 83-87., 41 (168124). ISSN 2214-7853

Norhashimah, Maktar Zani and Fadzida, Ismail (2021) Fermented Food Packaging Process: A Case Study of Khoriff By Bonda. In: 2nd Langkawi International Conference on Multi-Disciplinary Research 2021 (LICM2021) , 27 December 2021 , Bayview Hotel, Langkawi. pp. 63-67.. ISBN 978-967-2963-19-6

Norul Amierah, Nor Zamani and Iqbal, AKM Asif and Nuruzzaman, D. M. (2019) Fabrication and characterization of Al2O3 nanoparticle reinforced aluminium matrix composite via powder metallurgy. In: Materials Today: Proceedings; 4th Advanced Materials Conference 2018, AMC 2018 , 27 - 28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 190-195., 29 (1). ISSN 2214-7853

Nur Aini Safiah, Abdullah and Fatin Farisha, Abdullah and Amirul Hakim, Sufian and Ahmad Noor Syukri, Zainal Abidin and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2021) Effect of degradation by temperature onto nitrile rubber elastomer mechanical properties. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1941-1946., 48 (6). ISSN 2214-7853

Nur Amalina, Sabuan and Nurfatini, Zolkafli and Mebrahitom, A. and Azmir, Azhari and Othman, Mamat (2018) The development of Zirconia and Copper toughened Alumina ceramic insert. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-8., 342 (012106). ISSN 1757-899X

Nur Atikah, Nor’Azlan and Nur Asmiza, Selamat and Nafrizuan, Mat Yahya (2018) Multivariable PID controller design tuning using bat algorithm for activated sludge process. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-9., 342 (1). ISSN 1757-8981

Nur Azhani, Abd Razak and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2018) Thermal analysis of aluminium 7075 prior to semisolid metal processing. In: The 4th International Conference On Green Design And Manufacture , 29 April - 30 April 2018 , Ho Chi Minh, Vietnam. p. 1., 2030 (1).

Nur Aziera, Nur Aziera and Mebrahitom, A. and Azmir, Azhari and Saptaji, Kushendarsyah (2023) Mechanical Performance Evaluation of Al2O3–ZrO2–Ti Composite Materials. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 657-663.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Nur Ezzatul Balqis, Mohd Zahari and Norazlianie, Sazali and Zawati, Harun and Norsuhailizah, Sazali (2023) The analysis of risk factor repetitive motion in manufacturing activities based on ergonomics. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 119-125.. ISSN 2195-4356 ISBN 978-981-19-4425-3

Nur Fahriza, Mohd Ali and Ahmad Farhan, Mohd Sadullah and A., Zulkiple (2018) A preliminary survey on mode choice and its effect in users' satisfaction on their journey to the railway station. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-12., 342 (1). ISSN 1757-899X

Nur Fahriza, Mohd Ali and Ahmad Farhan, Mohd Sadullah and Abdul Majeed, Anwar P. P. and Mohd Azraai, Mohd Razman and Choong, Chun Sern and Musa, Rabiu Muazu (2022) Forecasting daily travel mode choice of kuantan travellers by means of machine learning models. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 979-987., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Nur Farina, Hamidon Majid and M. S., Najib and Suhaimi, Mohd Daud and Nurdiyana, Zahed and Muhamad Faruqi, Zahari and Suziyanti, Zaib and Mujahid, Mohamad and Tuan Sidek, Tuan Muda and Hadi, Manap (2020) The investigation of meat classification based on significant authentication features using odor-profile intelligent signal processing approach. In: Lecture Notes in Electrical Engineering; 5th International Conference on Electrical, Control and Computer Engineering, InECCE 2019 , 29 July 2019 , Kuantan. pp. 179-191., 632. ISBN 9789811523175

Nur Farina, Hamidon Majid and M. S., Najib and Suhaimi, Mohd Daud and Nurdiyana, Zahed and Muhamad Faruqi, Zahari and Suziyanti, Zaib and Mujahid, Mohamad and Tuan Sidek, Tuan Muda and Hadi, Manap (2020) The investigation of meat classification based on significant authentication features using odor-profile intelligent signal processing approach. In: Lecture Notes in Electrical Engineering; 5th International Conference on Electrical, Control and Computer Engineering, InECCE 2019 , 29 - 30 July 2019 , Swiss Garden Beach Resort, Kuantan. pp. 179-191., 632. ISSN 1876-1100 ISBN 9789811523168

Nur Farina, Hamidon Majid and Muhammad Sharfi, Najib and Muhamad Faruqi, Zahari and Suziyanti, Zaib and Tuan Sidek, Tuan Muda The classification of meat odor-profile using K-nearest neighbors (KNN). In: The 6th International Conference on Electrical, Control and Computer Engineering (InECCE2021) , 23rd August 2021 , Microsoft Teams platform. pp. 1-12.. (Unpublished)

Nur Farziana, Husein and Nurul Hidayah, Razak (2021) Tool deterioration of 316 stainless steel in dry down-milling using carbide insert. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 911-915., 48 (4). ISSN 2214-7853

Nur Fazrina, Mohamad Salleh and Hanida, Abdul Aziz and Ezrin Hani, Sukadarin (2023) New and emerging occupational risk and associations with small and medium enterprise (SMEs) in Malaysia: A review. In: 3rd Symposium on Industrial Science and Technology (SISTEC2021) , 25–26 August 2021 , Pahang, Malaysia. , 2682 (1). ISBN 978-0-7354-4326-6

Nur Hanisah, Azman and Oktaviandri, Muchamad and Muhammad Rizal, Ramedan (2022) SCADA system for industrial manipulator PLC trainer. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 375-385., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Nur Izzati, Pakhor Anuar and Hanida, Abdul Aziz (2023) Process equipment information web-based system for process industries. In: 2nd Process Systems Engineering and Safety (ProSES) Symposium 2021 , 1 December 2021 , Pahang, Malaysia. , 2792 (1). ISBN 978-0-7354-4640-3

Nur Izzati Khoirunnisa, Ismail and Abdul Sani, A. S. and Rosli, Nurrina (2020) Study of oil flow rates effects on lubricant oil behaviour during minimum quantity lubrication milling process. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1635-1639., 46 (169722). ISSN 2214-7853

Nur Izzati Khoirunnisa, Ismail and Nurrina, Rosli and Amagai, Kenji (2020) Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 584-589.. ISBN 978-981-15-0950-6

Nur Khadijah, Mazlan and Nazrin, Mokhtar and Asmelash, Mebrahitom Asmelash and Azmir, Azhari (2022) Prediction of abrasive waterjet machining of sheet metals using artificial neural network. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 43-50., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Nur Naajihah, Ab Rahman and Nafrizuan, Mat Yahya (2022) System identification for a mathematical model of DC motor with PI controller. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 73..

Nur Soliha, Sahimi and Faiz, Mohd Turan and Kartina, Johan (2017) Development of Sustainability Assessment Framework in Hydropower sector. In: 3rd and 4th International Engineering Research and Innovation Symposium, IRIS 2017 , 6-7 May 2017 , Melaka, Malaysia. pp. 1-6., 226 (012048). ISSN 1757-8981 (Print); 1757-899X (Online)

Nur Soliha, Sahimi and Faiz, Mohd Turan and Kartina, Johan (2017) Development of Systematic Sustainability Assessment (SSA) Tool for Enviromental Management in Malaysia Hydroelectric Project. In: Proceedings of the FGIC 1st Conference on Governance & Integrity , 3 - 4 April 2017 , Yayasan Pahang, Kuantan Pahnag, Malaysia.. pp. 9-16.. ISBN 978-967-2054-37-5

Nur Soliha, Sahimi and Faiz, Mohd Turan and Kartina, Johan (2018) Framework of Sustainability Assessment (FSA) method for manufacturing industry in Malaysia. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-7., 342 (012079). ISSN 1757-899X

Nur Syahirah, Mohamad Azlan and Noraini, Mohd Razali (2023) Perception of Employees on Lean Six Sigma Practices and Corporate Sustainability in Automotive Manufacturing Industry. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 539-547.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Nurainaa, Elias and Nafrizuan, Mat Yahya (2018) Fuzzy logic controller for DC motor position control. In: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 1-6.. (Unpublished)

Nurainaa, Elias and Nafrizuan, Mat Yahya (2022) Fuzzy logic controller optimized by MABSA for DC servo motor on physical experiment. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 561-570., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Nurainaa, Elias and Nafrizuan, Mat Yahya (2018) An ergonomics prototype of adjustable chin stands aid for visual mechanical inspection at electronic manufacturing-based company in Kuantan, Malaysia. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-6., 342 (012031). ISSN 1757-899X

Nuraini, Abdullah and Noor Mazni, Ismail and Dewan Muhammad, Nuruzzaman (2018) Characterization of tin oxide (SnO2) nanostructures prepared by thermal oxidation. In: AIP Conference Proceedings: 6th International Conference on Production, Energy and Reliability, ICPER 2018 , 13 - 14 Aug 2018 , Kuala Lumpur Convention Center, Kuala Lumpur. pp. 1-6., 2035. ISSN 0094243X ISBN 978-073541761-8

Nuraini, Abdullah and Noor Mazni, Ismail and Nuruzzaman, D. M. (2018) Preparation of tin oxide (SnO2) thin films using thermal oxidation. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Nuraini, Aziz and S. N., Aqida and I., Ismail (2017) Microstructural analysis of hot press formed 22MnB5 steel. In: 20th International ESAFORM Conference on Material Forming (ESAFORM 2017) , 26-28 April 2017 , University Dublin, Ireland. , 1896 (1). ISSN 0094243X ISBN 978-073541580-5

Nuramira, Zulkarnain and Nur Izzati, Pakhor Anuar and Hanida, Abdul Aziz and Wan Norlinda Roshana, Mohd Nawi (2023) Determination of leading indicator for proactive safe performance in chemical process industries (CPI). In: 2nd Process Systems Engineering and Safety (ProSES) Symposium 2021 , 1 December 2021 , Pahang, Malaysia. , 2792 (1). ISBN 978-0-7354-4640-3

Nurazima, Ismail and Z. M., Hafizi and Che Ku Eddy Nizwan, Che Ku Husin and S., Ali (2019) Simulation of lamb wave interactions with defects in a thin plate. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-7., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Nurizzathanis, Mohamad Kusaseh and Dewan Muhammad, Nuruzzaman and Chowdhury, Mohammad Asaduzzaman and Oumer, A. N. and Noor Mazni, Ismail and Shahnor, Basri (2017) Tensile Properties of Glass Fiber Reinforced Polyamide 6-Polypropylene Composites. In: 5th International Conference and Exhibition Sustainable Energy and Advanced Material (ICE-SEAM) , 16-19 October 2017 , Melaka, Malaysia. pp. 1-5.. (Unpublished)

Nurizzathanis, Mohamad Kusaseh and Dewan Muhammad, Nuruzzaman and Mohammad Asaduzzaman, Chowdhury and A. K. M., Asif Iqbal and Noor Mazni, Ismail and Fatchurrohman, Nanang and Chan, Shin Yi (2020) Influence of glass fiber content on the flexural properties of polyamide 6-polypropylene blend composites. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 466-471.. ISBN 978-981-15-0950-6

Nurrina, Rosli and K., Amagai (2016) Measurement of Interfacial Profiles of Wavy Film Flow on Inclined Wall. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-10., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Nurrina, Rosli and Kenji, Amagai (2015) Thickness Measurement of Liquid Sheet Spay Before Breakup. In: The 10th International Symposium On Advanced Science And Technology In Experimental Mechanics , 1-4 Nov 2015 , Matsue. . (Unpublished)

Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and Baarath, Kunjunni and Abdul Majeed, Anwar P. P. and Ahmad Fakhri, Ab Nasir and Papaioannou, Georgios (2022) Normal forces effects of a two in-wheel electric vehicle towards the human body. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 693-701., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and K., Baarath and Anwar, P. P. Abdul Majeed and Umar Zakir, Abdul Hamid (2019) The vibration effects of a two in-wheel electric vehicle towards the human brain. In: 5th International Conference on Recent Advances in Automotive Engineering , 20 - 22 Ogos 2019 , Bangi Resort Hotel Malaysia. pp. 1-6.. (Unpublished)

Nurul Afiqah, Zainal and Viknesh, Punichelvan and Ajisman, Apen (2014) Flywheel Energy Storage for Wind Energy System with SEIG-Motor Set. In: International Conference on Electrical Power Engineering and Applications (ICEPEA 2014) , 15-16 November 2014 , Langkawi, Kedah. .

Nurul Aida, Amir Khatif and Mohamad Aliff Kamil, Awang Kecik and Mohd Ali Hanafiah, Shaharudin and A. K., Prasada Rao and Noor Mazni, Ismail (2015) The Effect of Heat Treatment on The Hardness and Impact Properties of Medium Carbon Steel. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

Nurul Ain, Rosli and Aina Najwa, Azmi and Muhammad Ariff Hakimi, Mohd Kamal and Mohamad Rusydi, Mohamad Yasin (2021) Development of semi-automated guided vehicle for fertigation agriculture. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Nurul Farahin, Zamrud and Abu, Mohd Yazid and Nik Nurharyantie, Nik Mohd Kamil and Filzah Lina, Mohd Safeiee and Oktaviandri, Muchamad (2019) A review on the application of activity-based costing and time driven activity-based costing in manufacturing industry. In: 4th International ‎Conference on Engineering ‎Technology (ICET 2019) , 6-7 July 2019 , DITC Kemaman, Terengganu, Malaysia. pp. 1-6.. (In Press / Online First)

Nurul Farahin, Zamrud and Mohd Yazid, Abu and Nik Nurharyantie, Nik Mohd Kamil and Filzah Lina, Mohd Safeiee (2019) A Comparative Study of Product Costing by Using Activity-Based Costing (ABC) and Time-Driven Activity-Based Costing (TDABC) Method. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 171-178.. ISBN 978-981-15-0950-6

Nurul Farahin, Zamrud and Mohd Yazid, Abu and Nik Nurharyantie, Nik Mohd Kamil and Filzah Lina, Mohd Safeiee (2020) The Impact of Capacity Cost Rate and Time Equation of Time-Driven Activity-Based Costing (TDABC) on Electric Component. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 81-87.. ISBN 978-981-15-0950-6

Nurul Farahin, Zamrud and Mohd Yazid, Abu and Nik Nurharyantie, Nik Mohd Kamil and Filzah Lina, Mohd Safeiee and Oktaviandri, Muchamad (2019) Application of Activity-Based Costing In Electronic Manufacturing. In: 4th International ‎Conference on Engineering ‎Technology (ICET 2019) , 6-7 July 2019 , DITC Kemaman, Terengganu, Malaysia. pp. 1-6.. (In Press / Online First)

Nurul Hazlina, Noordin and Hwa, L. B. and N., Hassan and Rosdiyana, Samad and Zuwairie, Ibrahim (2018) An RF switching circuit using PIN diode for a 2.4GHz frequency reconfigurable antenna. In: Symposium on Computer Applications & Industrial Electronics (ISCAIE 2018) , 28-29 April 2018 , Penang, Malaysia. pp. 259-262.. ISBN 978-1-5386-3527-8

Nurul Hidayah, Ghazali and Rodziah, Nazlan and Siti Norain, Abdul Mubin (2021) Waste-to-wealth : From printer toner waste into valuable magnetic materials. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Nurul Hidayah, Othman and L. H., Shah and M., Ishak (2015) Mechanical and Microstructural Characterization of Single and Double Pass Aluminum AA6061 Friction Stir Weld Joints. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012016). ISSN 1757-8981 (Print), 1757-899X (Online)

Nurul Hidayah, Razak (2020) The influence of coolant on tool deterioration of uncoated carbide tools in endmilling hardened inconel 718plus nickel based superalloy. In: RITA 2018: Proceedings of the 6th International Conference on Robot Intelligence Technology and Applications , 16-18 December 2018 , Putrajaya, Malaysia. pp. 117-122., 113. ISBN 978-981-13-8322-9

Nurul Kamariah, Md Saiful Islam and Wan Sharuzi, Wan Harun and S. A., Che Ghani and Mohd Asnawi, Omar and Mohd Hazlen, Ramli and Muhammad Hussain, Ismail (2017) Physical Properties and Microstructure Study of Stainless Steel 316L Alloy Fabricated by Selective Laser Melting. In: AIP Conference Proceedings: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-6., 1901 (100015). ISBN 978-0-7354-1589

Nurul Mubinah, Suhaimi and Zhang, Yixuan and Joseph, Mary and Kim, Miso and Parker, Andrea G. and Griffin, Jacqueline (2022) Investigating older adults’ attitudes towards crisis informatics tools : Opportunities for enhancing community resilience during disasters. In: Conference on Human Factors in Computing Systems - Proceedings; 2022 CHI Conference on Human Factors in Computing Systems, CHI 2022 , 30 April-5 May 2022 , Virtual, Online. pp. 1-16. (258). ISBN 978-145039157-3

Nurul Nazihah, Hawari and Razman, Mat Tahar (2011) Some Issues in the Strategic University Management. In: 19th Triennal Conference of the International Federation of Operationals Research Societies , 10-15 July 2011 , Melbourne Convention and Exhibition Center, Melbourne. pp. 1-5..

Nurul Nazihah, Hawari and Razman, Mat Tahar (2010) System Dynamic Simulation Model for Higher Education Strategic Planning. In: Asian Pacific Operational Research Conference (APORS) 2010 , 4-8 Dicember 2010 , Bayview Beach Resort Hotel, Ferringhi Penang. pp. 1-6..

Nuruzzaman, D. M. and Iqbal, AKM Asif and Maziyana, Marzuki and Chowdhury, Mohammad Asaduzzaman and Noor Mazni, Ismail and Muhammad Ihsan, Abdul Latiff and Rahman, M. M. and Gebremariam, M. A. (2020) Investigation on microstructure and hardness of aluminium-Aluminium oxide functionally graded material. In: Lecture Notes in Mechanical Engineering; 4th International Manufacturing Engineering Conference and 5th Asia Pacific Conference on Manufacturing Systems, iMEC-APCOMS 2019 , 21 - 22 August 2019 , Putrajaya, Malaysia. 478 -483.. ISSN 2195-4356 ISBN 978-981-15-0950-6

Nuruzzaman, D. M. and Kusaseh, N. and Iqbal, AKM Asif and Khan, Maksudur R. and Azmir, Azhari and Zamzuri, Hamedon and Chan, Shin Yi (2019) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings; 4th Advanced Materials Conference 2018, AMC 2018 , 27 - 28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29. ISSN 2214-7853

Nurziana Kong, Johan Kong and R. A., Bakar and Lim Yi, Leang and Mohd Adnin, Hamidi (2019) The analysis of wind blade on the performance of vertical axis wind turbine (VAWT). In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Oktaviandri, Muchamad and Aidil Shafiza, Safiee (2018) Modelling electrical energy consumption in automotive paint shop. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-8., 319 (012060). ISSN 1757-8981 (Print); 1757-899X (Online)

Oudah, Ali A. (2017) Deployments Scenarios of 5G Networks. In: The 5th International Conference On Wireless Systems And Networks (ICWSN-2017) , 24-27 April 2017 , Toronto, Canada. pp. 1-10.. (Unpublished)

Oudah, Ali A. (2016) RFID-Based Automatic Bus Ticketing: Features And Trends. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-10., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Oumer, Abduaziz Jama and Cheng, Jack Kie and Razman, Mat Tahar (2015) Green manufacturing and logistics in automotive industry: A simulation model. In: 2015 9th International Conference on IT in Asia: Transforming Big Data into Knowledge, CITA 2015 , 4-5 Aug. 2015 , Kota Samarahan, Malaysia. pp. 1-6. (7349839). ISBN 9781479999392

P., Gupta and J., Roy and R. N., Rai and A. K., Prasada Rao and S. C., Saha (2016) Effect of B2O3 Containing Fluxes on the Microstructure and Mechanical Properties in Submerged Arc Welded Mild Steel Plates. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-7., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Phang, Yun Moon and Gebremariam, M. A. and Hamedon, Zamzuri B. and Azhari, Azmira (2020) Investigation on turning operation using die sinking EDM process. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1569-1573., 46 (169722). ISSN 2214-7853

Qutaba, Syed and Azmir, Azhari and Mebrahitom, Asmelash (2024) Effect Of Surface Topography Of 8090 Al-Li Alloy During Abrasive Waterjet Peening Process. In: AIP Conference Proceedings. 5th International Conference on Automotive Innovation & Green Energy Vehicle (AiGEV2022) , 5 – 6 December 2022 , Langkawi, Kedah. pp. 1-7., 2998 (060005). ISBN 978-0-7354-4793-6

Rabiatul Syuhada, Hasan and Muhammed Nafis, Osman Zahid (2022) Implementation of lean tools as waste assessment method in a coil spring manufacturing. In: The 4th International Conference on Engineering and Technology for Sustainable Development (4th ICET4SD 2021) . pp. 1-13.. (Submitted)

Rabiu Muazu, Musa and Anwar, P. P. Abdul Majeed and Mohd Azraai, M. Razman and Mohd Ali Hanafiah, Shaharudin (2018) Match outcomes prediction of six top English Premier League clubs via machine learning technique. In: The 6th International Conference On Robotics Intelligence And Applications 2018 , 15-19 Disember 2018 , Putrajaya, Malaysia. pp. 1-10.. (Unpublished)

Radhiyah, Abd Aziz and Nurziela, K. (2020) Effect of TiO2 nanofluid and hybrid TiO2 nanofluid on mechanical properties of steels for automotive applications. In: Journal of Physics: Conference Series, The 2nd Joint International Conference on Emerging Computing Technology and Sports (JICETS) , 25-27 November 2019 , Bandung, Indonesia. pp. 1-8., 1529 (052036). ISSN 1742-6596

Radhiyah, Abd Aziz and Rajan, Jose (2019) Modification of layered structure in Manganese oxide nanorods for electrode of supercapacitor. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 455-460.. ISBN 978-981-15-0950-6

Radhwan, H. and Nasir, S. M. and Mohd Rashidi, Maarof and Kamarudin, K. and Abdellah, Abdellah el-hadj (2019) Optimization parameters to reduce the warpage defect of plastic injection molding process for a thin-shell part using design of experiment. In: IOP Conference Series: Materials Science and Engineering, Joint Conference on Green Engineering Technology & Applied Computing 2019 , 4-5 February 2019 , Bangkok, Thailand. pp. 1-7., 551 (012027). ISSN 1757-8981 (Print), 1757-899X (Online)

Rahman, Sam Matiur and Ali, Md. Asraf and Altwijri, Omar and Alqahtani, Mahdi and Ahmed, Nasim and Ahamed, Nizam Uddin (2020) Ensemble-based machine learning algorithms for classifying breast tissue based on electrical impedance spectroscopy. In: International Conference on Applied Human Factors and Ergonomics : AHFE 2019 , 24 - 28 July 2019 , Washington D.C., United States. pp. 260-266., 965. ISSN 2194-5357 ISBN 978-3-030-20453-2 (Print); 978-3-030-20454-9 (Online)

Raja Murfiqah, Raja Mohd Fouzy and Norfazilasari, Yasman and Mohd Zairulnizam, Mohd Zawawi (2024) Fabrication of micro and nanostructures on glass using non-isothermal thermal imprinting. In: Materials Today: Proceedings. 2nd International Symposium on Advanced Functional Materials , Feb 16, 2023 - Feb 16, 2023 , Kuala Lumpur, Malaysia. . ISSN 2214-7853 (In Press / Online First)

Razman, Mat Tahar (2011) Evaluating Capacity Of Palm Oil Mill Using Simulation Towards Effective Supply Chain - A Case Study. In: International Conference Management , 13-14 June 2011 , Hydro Hotel, Penang. . (Unpublished)

Razman, Mat Tahar and Fazeeda, Mohamad and Norhanom, Awang (2011) Reducing Disturbance in Manufacturing System with Discrete-event Simulation. In: International Management Conference 2011 , 16-17 April 2011 , Taman Tamadun Islam, Kuala Terengganu. . (Unpublished)

Reddy, Guduru Ramakrishna and Singh, Harpreet and Domeika, Aurelijus and Manoj Kumar, Nallapaneni and Quanjin, Ma (2020) Modelling of heuristic distribution algorithm to optimize flexible production scheduling in Indian industry. In: Procedia Computer Science; 2019 International Conference on Computational Intelligence and Data Science, ICCIDS 2019 , 6 - 7 September 2019 , Gurugram, India. pp. 1120-1127., 167. ISSN 1877-0509

Rosdi, Daud and Kennedy, S. J. and Mas Ayu, Hassan and A., Shah (2021) Effect of thread profile on bending strength of pedicle screw. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME2021) , 19-20 January 2021 , Universiti Malaysia Pahang, Pekan, Malaysia. pp. 1-8., 1078 (012026). ISSN 1757-899X

Rosdi, Daud and Mas Ayu, Hassan and R., Norizah and A. K., Nasution (2023) Deformation Behaviour of a High Carbon Co–Cr–Mo Medium-Entropy Alloy via Thermal Oxidation. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 649-656.. ISSN 2195-4356 ISBN 978-981-99-1244-5

S., Aid and I., Ismail and S. A., Wahid and M. S., A. Rahim (2015) Magnetorheological Fluid Materials Properties, Rheological Behaviour and Device Design in Valve Application. In: 2nd International Manufacturing Engineering Conference (IMEC2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

S., Sha'akmal and Ali, Mohammed A. H. and A. R., M. Sawal (2018) Modeling and design of two link robotic manipulator for grading and sorting of rotationally symmetric products. In: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 1-8.. (Unpublished)

S., Zainal Ariffn and Efendee, A. M. and Alias, M. and Redhwan, A. A. M. and Muhamed, M. N. and A. R., Yusoff (2021) Optimization on the effect of nozzle orifice coolant supply during machining automotive material Al319. In: Journal of Physics: Conference Series; 1st International Recent Trends in Engineering, Advanced Computing and Technology Conference, RETREAT 2020 , 1 - 3 December 2020 , Paris, France (Virtual). pp. 1-9., 1874 (1). ISSN 1742-6588 (print); 1742-6596 (online)

S. A., Wahid and I., Ismail and M. S. A., Rahim (2016) Magneto-rheological Defects and Failures: A Review. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-11., 114. ISSN 1757-8981 (Print); 1757-899X (Online)

S. K., Lim and M. F., Zamri and A. R., Yusoff (2018) Numerical simulation of hot press forming process for quenchable sheet metal between nanocoolant and chilled water. In: 9th International Conference on Nanoscience & Nanotechnology (NANO-SCIETECH 2018) , 26 February - 1 March 2018 , UiTM, Shah Alam. pp. 1-2.. (Unpublished)

S. K., Lim and N. Z., Mohamad and A. R., Yusoff (2019) Experimental investigation of recycled machining coolant mixed with nanofluids based Al2O3. In: International Conference On Recent Advances In Industrial Engineering And Manufacturing (ICRAIEM 2018) , 12 - 13 Disember 2018 , Penang. pp. 1-6., 530 (012002). ISSN 17578981

S. M., Asyraf and Mohamad Heerwan, Peeie and I. M., Zulhilmi and I. M., Izhar (2019) Plugging brake system as a hill descend control for electric powered wheelchair: Experimental analysis. In: IEEE International Conference on Advanced Robotics and Mechatronics (ICARM 2019) , 3-5 July 2019 , Toyonaka Campus, Osaka University, Japan. pp. 319-324.. ISBN 978-1-7281-0064-7

S. M., Rosdi and R., Mamat and Alias, Azri and H., Hamzah and K., Sudhakar and Gholamhassan, Najafi and Farzad, Jaliliantabar (2019) Performance and emission of turbocharger engine using gasoline and ethanol blends. In: IOP Conference Series: Materials Science and Engineering, Symposium on Energy Systems 2019 (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-11., 863.

S. N., Aqida (2008) An Overview of Laser Surface Modification of Die Steels. In: 25th International Manufacturing Conference . pp. 120-128..

S. N. A. M., Zaini and Abu, Mohd Yazid (2021) Measuring the Unused Capacity for Mature and Immature Area in Palm Oil Nursery Using Time Driven Activity-Based Costing. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 33-41.. ISSN 978-981-15-7309-5

S. N. S., Jamaludin and M. I. A., Latiff and D. M., Nuruzzaman and N. M., Ismail and S., Basri (2020) Investigation on microstructure and hardness of nickel-alumina functionally graded material. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018 , 27-28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 127-132., 29 (Part 1). ISSN 2214-7853

S. Z. A., Sakinah and W. H., Azmi and J., Alias (2020) Characterization of TiO2 nanopaint for automotive application. In: 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October. 2019 , Kuantan; Malaysia. pp. 1-8., 863 (1). ISSN 17578981

Sai, T. K. and Saptaji, Kushendarsyah and Gebremariam, M.A. and Fatchurrohman, Nanang (2019) Study on end brush deburring and sintered diamond ball deburring of micro-features milled. In: IOP Conference Series: Materials Science and Engineering, International Conference on Recent Advances in Industrial Engineering and Manufacturing , 12-13 December 2018 , Penang, Malaysia. pp. 1-8., 530 (012025). ISSN 1757-899X

Sajith, Akhil Vinayak and Zakaria, M. A. and Baarath, K. and Anwar, P. P. Abdul Majeed (2021) A novel Bezier curve control point search algorithm for autonomous navigation using N-order polynomial search with boundary conditions. In: 2021 IEEE International Intelligent Transportation Systems Conference (ITSC) , 19-22 September 2021 , Indianapolis, IN, USA. 3884 -3889., 2021. ISSN 978-172819142-3

Sanderasagran, Ashwindran Naidu and Azizuddin, Abd Aziz and Oumer, Ahmed Nurye (2021) Novel bio-hybrid drag induced wind turbine. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Saptaji, Kushendarsyah and Subbiah, Sathyan (2016) Finite Element Study on The Effect of Substrate Properties in Micro-cutting Thin Workpiece Materials. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-11., 114 (012005).

Shan, Kho Y. and Mahmood, Anwar and Islam, Sumaiya and Debnath, Sujan and Mas Ayu, Hassan (2019) Electrical behaviour of nanosilver doped gallium flexible conductor for biomedical application. In: IOP Conference Series: Materials Science and Engineering, 11th Curtin University Technology, Science and Engineering (CUTSE) , 26-28 November 2018 , Curtin University Malaysia, Miri, Sarawak. pp. 1-6., 495 (012084). ISSN 1757-8981 (Print), 1757-899X (Online)

Shanono, Ibrahim Haruna and Nor Rul Hasma, Abdullah and Nur Fajrina, Mohd Noh and Muhammad, Aisha (2022) Distribution network reconfiguration for transmission loss minimization and voltage profile Improvement using salp swarm optimization algorithm. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 1103-1123., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6

Sha’Akmal, S. and Ali, Mohammed A. H. and M. Sawal, A. R. and A. Azwan, A. Razak (2018) A review on control of robotic manipulator for performing grading and sorting of rotational symmetric products. In: 14th World Conference On Applied Science, Engineering And Technology , 21-22 November 2018 , Kual Lumpur. pp. 1-6.. (Unpublished)

Sheng, Annie Lau and I., Ismail and S. N., Aqida (2018) Effect of laser parameters on surface roughness of laser modified tool steel after thermal cyclic loading. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (012002). ISSN 1757-8981 (Print), 1757-899X (Online)

Siti Haryani, Tomadi and Nor Farah Huda, Abd Halim and Mas Ayu, Hassan and Rosdi, Daud and Muhammad Ariff, Zakaria (2023) Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL. In: Lecture Notes in Mechanical Engineering; 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022 , 9-10 August 2022 , Kuala Lumpur. pp. 637-643. (294689). ISSN 2195-4356 ISBN 978-981199508-8

Siti Khairatul Atika, Ahmad Kamal and Ahmad Shahrizan, Abdul Ghani (2018) Implementation of aggregate channel feature (ACF) function detector feature-based vehicle detection for an autonomous vehicle detection. In: 10th National Technical Seminar on Underwater System Technology 2018 (NUSYS'18) , 26 - 27 September 2018 , Universiti Malaysia Pahang. pp. 1-15.. (Unpublished)

Siti Munirah, Muhammad Ali and El-Bouri, Wahbi K. and Mohd Jamil, Mohamed Mokhtarudin (2022) Age-based sensitivity analysis on cardiac hemodynamics using lumped-parameter modelling. In: 7th IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2022 - Proceedings , 7-9 December 2022 , Virtual, Online. pp. 160-164. (187642). ISBN 978-166549469-4

Siti Norhana, Selamat and Nik Hisyamudin, Muhd Nor and Muhammad Hanif, Abdul Rashid and Mohd Fauzi, Ahmad and Fariza, Mohamad and Al Emran, Ismail and Mohd Fahrul, Hassan and Faiz, Mohd Turan and Zamzuri, Hamedon and Elmi, Abu Bakar and Seiji, Yokoyama (2017) Review of CO2 Reduction Technologies using Mineral Carbonation of Iron and Steel Making Slag in Malaysia. In: Journal of Physics: Conference Series, International Conference on Materials Physics and Mechanics 2017 , 23 July 2017 , Langkawi, Malaysia. pp. 1-14., 914 (012012). ISSN 1742-6596

Siti Nursuhailah, Md Suhaidin and Norazlianie, Sazali and Wan Norharyati, Wan Salleh (2022) The development of quick response manufacturing in supply chains activities based on product planning control. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 127-132.. ISSN 2195-4356 ISBN 978-981-19-4425-3

Siti Suhaila, Sabarudin and Ahmad Najmuddin, Ibrahim and Ahmad Shahir, Jamaludin and Fukuoka, Yasuhiro (2019) Effects of grouser movement to sand-grouser interaction on unconsolidated soft sand incline using discrete element method (DEM) simulation. In: 4th International ‎Conference on Engineering ‎Technology (ICET 2019) , 6-7 July 2019 , DITC Kemaman, Terengganu, Malaysia. pp. 1-6.. (Unpublished)

Siti Suhaila, Sabarudin and Ahmad Najmuddin, Ibrahim and Fukuoka, Yasuhiro (2019) Effect of Grouser Angle of Attack on Performance of Adjustable Robot Wheel Assistive Grouser. In: Joint Conference of 4th International Manufacturing Engineering Conference (iMEC) & 5th Asia-Pacific Conference on Manufacturing System (APCOMS) , 21-22 August 2019 , Putrajaya, Malaysia. pp. 1-6.. (Unpublished)

Suhaimi, Mohd Daud and Muhammad Sharfi, Najib and Saiful Nizam, Tajuddin and Muhamad Faruqi, Zahari and Nur Farina, Hamidon Majid and Suziyanti, Zaib and Mujahid, Mohamad Lubricant oil odor-profile classification using case based reasoning intelligent classification method. In: The 6th International Conference on Electrical, Control and Computer Engineering (InECCE2021) , 23rd August 2021 , Microsoft Teams platform. pp. 1-13.. (Unpublished)

Suhazri Amrin, Rahmad and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2021) A Modified Simulated Kalman Filter Optimizer with State Measurement, Substitution Mutation, Hamming Distance Calculation, and 2-Opt Operator. In: IEEE 19th Student Conference on Research and Development (SCOReD 2021) , 23-25 November 2021 , Kota Kinabalu, Malaysia. pp. 91-95.. ISBN 978-1-6654-0193-7

Suhazri Amrin, Rahmad and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2021) A Modified Simulated Kalman Filter Optimizer with State Measurement, Substitution Mutation, Hamming Distance Calculation, and Swap Operator. In: IEEE International Conference on Computer System, Information Technology, and Electrical Engineering (COSITE 2021) , 20-21 October 2021 , Banda Aceh, Indonesia. pp. 181-185.. ISBN 978-1-6654-2509-4

Suhazri Amrin, Rahmad and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2022) Simulated Kalman Filter with modified measurement, substitution mutation and hamming distance calculation for solving traveling salesman problem. In: Enabling Industry 4.0 through Advances in Mechatronics: selected articles from iM3F 2021, Malaysia , 20 September 2021 , Universiti Malaysia Pahang (UMP). pp. 309-320.. ISBN 978-981-19-2095-0

Suparmaniam, M. V. and A. R., Yusoff and Ajisman, Apen (2016) Development of Variable Frequency Drive for Compact Three Phase Induction Motor using Discrete Components. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 352-361..

Suraidah, S. and Muhamad Ridzuwan, . and Gebremariam, M. A. and Azmir, Azhari and Kassa, Freselam Mulubrhan (2020) End milling finite element method for cutting force prediction and material removal analysis. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-8., 788 (012020). ISSN 1757-8981 (Print), 1757-899X (Online)

Suraya, Sulaiman and M. D., Azman and Fatchurrohman, Nanang and Abdul Aziz, Jaafar and A. R., Yusoff (2016) Simulation on the Effect of Bottle Wall Thickness Distribution using Blow Moulding Technique. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-7., 114 (012004). ISSN 1757-8981 (Print), 1757-899X (Online)

Suziyana, Mat Dahan and Nurhaizan, Mohd Zainudin and Lee, Chia Kuang and Mohd Yusof, Taib (2011) Innovation Process: A Review of Existing Models and Development of an Alternative Model. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011) , 13-15 August 2011 , Johor, Malaysia. pp. 1-9..

Suziyana, Mat Dahan and S. M., Yusof (2019) A simulation-based approach to assess eco-process innovation performance. In: Joint Conference of the 6th Annual Conference of Industrial and System Engineering 2019, ACISE 2019 and 1st International Conference on Risk Management as an Interdisciplinary Approach 2019, ICRMIA 2019 , 23-24 April 2019 , Gumaya, Hotel Semarang, Central Java. pp. 1-10., 598 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Suziyanti, Zaib and Muhammad Sharfi, Najib and Suhaimi, Mohd Daud and Muhammad Faruqi, Zahari and Mujahid, Mohamad The study of groundwater source by using KNN classification. In: The 6th International Conference on Electrical, Control and Computer Engineering (InECCE2021) , 23rd August 2021 , Microsoft Teams platform. pp. 1-12.. (Unpublished)

Syafiq Qhushairy, Syamsul Amri and Ahmad Shahrizan, Abdul Ghani and Mohd Aiman Syahmi, Kamarul baharin (2023) Implementation of underwater image enhancement for corrosion pipeline inspection (UIECPI). In: 2023 19th IEEE International Colloquium on Signal Processing and Its Applications, CSPA 2023 - Conference Proceedings , 3-4 March 2023 , Kedah. pp. 195-200.. ISBN 978-166547692-8

Syarifah Nur Hasanah, Syed Kamarudin and Lee, Helen and Ismayuzri, Ishak and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin and Mohd Ali Hanafiah, Shaharudin and Mohd Zairulnizam, Mohd Zawawi (2021) Rapid Direct Continuous Method for Hot Embossing of Glass Microlens Array Combined with CO2 Laser Irradiation and External Preheating/Cooling. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 669-675.. ISBN 978-981-15-9505-9

Syarifah Nur Hasanah, Syed Kamarudin and Lee, Helen May Shian and Mohd Zairulnizam, Mohd Zawawi (2022) Direct formation of periodic parallel microgrooves on glass using CO2 laser irradiation. In: Innovative Manufacturing, Mechatronics & Materials Forum (iM3F 2022) , 20 July 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 1-4.. ISBN 978-1-83953-781-3

Syazwani, H. and Mebrahitom, A. and Azmir, Azhari (2016) A Review on Nozzle Wear in Abrasive Water Jet Machining Application. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114. ISSN 1757-899X

Syed, Qutaba and Azmir, Azhari and Gebremariam, Mebrahitom Asmelash and Yadav, Aman and Lusi, Nuraini (2022) Development of fiber metal laminate composite with different glass fiber gsm. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-8.. ISSN 2214-7853 (In Press / Online First)

Tai, K. Siang and Anusuiah, Vasu and Hagos, F. Y. and M. M., Noor and R., Mamat and K., Kadirgama and Azmi, W. H. and Samykano, Mahendran and Sharma, Ravi Kumar (2018) Effect of loading temperature on thermophysical properties of paraffin wax as PCM for thermal energy storage. In: Proceedings of International Conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN 2019) , 8-9 March 2019 , Manipal University Jaipur. p. 55..

Tan, Sien Siang and Ali, Mohammed A. H. (2018) Smart mobile robot system for rubbish collection. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-9., 319 (1). ISSN 17578981

Tan, Z Q and Nurrina, Rosli and Muchamad, Oktaviandri (2018) Simulation on effect of preform diameter in injection stretch blow molding. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 17578981

Tasiransurini, Ab Rahman and Mohd Ibrahim, Shapiai and Zuwairie, Ibrahim and Nor Hidayati, Abdul Aziz and Nor Azlina, Ab. Aziz and Mohd Saberi, Mohamad (2019) Evaluation of Different Horizon Lengths in Single-agent Finite Impulse Response Optimizer. In: IEEE International Conference on Computer and Information Sciences (ICCIS 2019) , 3-4 April 2019 , Jouf University, Aljouf, Kingdom of Saudi Arabia. pp. 1-7.. ISBN 978-1-5386-8125-1