Items where Year is 2013

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 
Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items: 1905.

Muhammad Kharin Annuar, Sairan (2013) The effect of low sulphur wax residique (LSWR) and sorbitan monooleate (SPAN-80) to the emulsion fuel stability. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

A

A., Shamsudeen and S., Abdullah and A. K., Ariffin and Yusoff, Ali (2013) Design and Simulation of a Cylinder Head Structure for A Compressed Natural Gas Direct Injection Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 9 . pp. 1620-1629. ISSN 1985-9325(Print); 2180-1606 (Online)

A. N., Abdalla and Mortaza, Mohamed and Ramdan, Razali and Muhammad, Rauf (2013) Response Surface Method In-Cooperating Embedded System For Bus Route Optimization. In: International Conference on Technological Advances in Electrical, Electronics and Computer Engineering (TAEECE), 9-11 May 2013 , Konya. pp. 66-71..

A. N. M., Rose and B. M., Deros and M. N., Ab. Rahman (2013) Lean Manufacturing Perceptions and Actual Practice Among Malaysian SME’s in Automotive Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 7 . pp. 820-829. ISSN 1985-9325(Print); 2180-1606 (Online)

A. N. M., Rose and B. M., Deros and M. N., Ab. Rahman (2013) A Study on Lean Manufacturing Implementation in Malaysian Automotive Component Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 8 . pp. 1467-1476. ISSN 1985-9325(Print); 2180-1606 (Online)

A. R., Abdul Aziz and M. B., Nishazini and Noor Azlinna, Azizan (2013) Improving Customer Satisfaction: Implementing Decentralised Inpatient Discharges At Ward Level. Journal of Business and Management, 12 (4). pp. 51-55. ISSN 2319-7668

A. R., Abd Aziz and M. B., Nishazini and Azlinna, Azizan (2013) Quality Improvement Culture in KPJ Seremban Specialist Hospital, Malaysia: The Impact of Total Quality Management. Asian Journal of Pharmaceutical and Health Sciences, 3 (3). pp. 774-778. ISSN 2231-234X

A. R., Abdul Aziz and M. B., Nishazini and S., Fazira and Noor Azlinna, Azizan (2013) Impact Of A Special Protocol (Integrated Intravenous Care) To Reduce Intravenous Thrombophlebitis:Sharing The Experience Of Kpj Seremban Hospital Malaysia. Journal of Business and Management, 13 (5). pp. 60-64. ISSN 2319-7668

A. R., Abdul Aziz and M. B., Nishazini and U., Azlina and Noor Azlinna, Azizan (2013) To See The Impact Of Various Interventions On Staff Knowledge And Compliances By Conducting Waste Audit In Kpj Seremban Specialist Hospital Malaysia. Journal Of Environmental Science, Toxicology And Food Technology , 5 (1). pp. 64-72. ISSN 2319-2399

A. R., Razali and Qin, Yi (2013) A Review on Micro-manufacturing, Micro-forming and Their Key Issues. Procedia Engineering, 53 . pp. 665-672. ISSN 1877-7058

AL-Duliamy, Mushtaq N. Ahmad and Hojabri, Mojgan and Hamdan, Daniyal and Humada, Ali Mahmood (2013) Simulation of Regulated Power Supply for Solar Photo-Voltaic Model. International Journal of Engineering Sciences & Research Technology, 2 (12). pp. 3607-3613. ISSN 2277-9655

Abd Jalil, Borham (2013) Development Framework on the Potential Personal Leadership in Realizing the Holistic Education. International Journal of Technology Management, 2 . pp. 41-46. ISSN 2289-2753

Abd Jalil, Borham (2013) Development Module of Holistic Leadership Training in Facing of Global Challenges. International Journal of Education and Research, 1 (9). pp. 1-8. ISSN 2201-6740

Abd Jalil, Borham (2013) A Framework Module Of Holistic Human Development In Facing Of Global Economic Transformation. In: International Conference on Research in Ethics Educational, 18-25 November, 2013 , Istanbul, Turkey. .

Abd Jalil, Borham (2013) The Influence of Turkish Ottoman Islamic Civil Law in 19th Century in the State of Johor, Malaysia. American International Journal of Contemporary Research, 3 (8). pp. 59-62. ISSN 2162-142X

Abd Jalil, Borham (2013) Jawi tulisan serantau. Berita Harian, (25 Ja . p. 29.

Abd Jalil, Borham (2013) Konsep Siyasah Syar`Iyyah Dan Pelaksanaannya Dalam Konteks Malaysia. In: Seminar Kebangsaan Pelaksanaan Siyasah Syar`iyyah Dalam Konteks Masa Kini: Isu Dan Cabaran, 21 February 2013 , Kolej Universiti Islam Melaka. . (Unpublished)

Abd Jalil, Borham (2013) Malaysian Experience In Implementation Of The Banking And Financial Transactions Without Riba. International Journal of Research In Social Sciences, 3 (2). pp. 40-47. ISSN 2307-227X

Abd Jalil, Borham (2013) The Relationship Between Turkey And Malaysia In 19th Century And The Impact Of Implementation Of Majalah Ahkam Johor. The International Journal of Social Sciences (TIJOSS), 013 (1 -- 2013). pp. 46-50. ISSN 2305-4557

Abd Jalil, Borham and Munira, Abdul Razak (2013) Women As The Catalyst Of Human Capital Development: A Case Study In Malaysia. The International Journal of Social Sciences (TIJOSS), 16 (1). pp. 29-45. ISSN 2305-4557

Abd Jalil, Borham (2013) Pengurusan risiko jaminan inovasi kewangan Islam. Berita Harian, (7 Mac . p. 29.

Abd Rahman, Safie (2013) UMP annual report 2013. Other. Penerbit Universiti Malaysia Pahang, Kuantan.

Abdul Ghaffar, Abdul Rahman and Kong, K. K. and Z., Ismail and Chong, W. T. (2013) Determination of Vibration Borne Stress in a Pipeline Using Fluid Structure Interaction. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10.. (Unpublished)

Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Zubaidah, Ismail and Chong, Wen Tong and Noroozi, Siamak (2013) Impact Force Identification by Using Modal Transformation Method in Collocated and Non-Collocated Cases. Journal of Mechanical Engineering and Sciences (JMES) , 6 . pp. 968-974. ISSN 2289-4659 (print); 2231-8380 (online)

Abdul Hadi, Che Hussin (2013) Leakage detection in pipelines using synchrosqueeze wavelet transform. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Abdul Haffizh, Zulkifli (2013) Investigation the effect of cationic surfactant on heat transfer performance in heat exchanger. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Kadir, Samta (2013) Leak detection in pipelines using wavelet and cepstrum analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Karim, Shaikh Abdul Nasir (2013) Development of Polyvinylidene Fluoride - Polydimethylsiloxane (Pvdf-Pdms) Thin Film Composite (Tfc) Membrane For Co2/ N2 Gas Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Muhaimin, Aris (2013) Experimental investigation of the minimum quantity lubrication in end-milling of AA6061T6 by coated carbide tools. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Muiz, Jaafar (2013) Experiment and analysis of motocycle exhaust design. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Abdul Mutholib, Osman (2013) Fatigue analysis of similar and dissimilar solid rod welding using friction welding process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Nasir, Abd Ghafar (2013) Research of material dispersion in optical materials for optical waveguides. Masters thesis, Universiti Malaysia Sarawak.

Abdul Rahim, Zulkufli Ahmad (2013) Development of neck dummy for head impact (soccer heading) experimental setup. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Rahman, Ahmad (2013) Pelajar raih 6 pingat emas dan 3 Anugerah Khas dalam i-ENVEX. CREATE . p. 31. ISSN 1823-7487

Abdul Rahman, Mohamad (2013) Simulation of mini hydro power based on river configuration at river upstream. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Abdul Razak, Raaff (2013) Pengeluar air jampi perlu kena tindakan. Berita Harian .

Abdul Syukor, Abd Razak (2013) Phytogreen sistem mesra alam rawat sisa kumbahan. Berita Harian . p. 29.

Abdullah, Embong (2013) Pengkomputeran awam perkasa pembelajaran. Berita Harian, (18 Ju .

Abdullah, Muhamad Nawi (2013) Computational analysis of two dimensional flows on a convertible car roof. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abid Abbas, Mohamed Arifin (2013) Analysis of propellers for micro hydro power for domestic and comercial loads. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Achmad Fauzi, Abdul Wahab and Fauzi, Usama Juniansyah and Wan Mohd Nazmi, Wan Abdul Rahman (2013) Engineering Quality Improvement Of Kuantan Clay Subgrade Using Recycling And Reused Materials as Stabilizer. Procedia Engineering, 54 . pp. 675-708. ISSN 1877-7058

Achmad Fauzi, Abdul Wahab and Usama Juniansyah, Fauzi (2013) De-aggregation of New National Seismic Hazard Maps for Indonesia. In: The 10th International Conference on Urban Earthquake Engineering (10CUEE Conference), 1-2 Mar 2013 , O-okayama Campus, Tokyo Institute of Technology, Tokyo, Japan. pp. 175-178..

Achmad Fauzi, Abdul Wahab and Zuraidah, Fauzi and Usama Juniansyah, Fauzi (2013) Evaluation of CBR Increase on Stabilized Kuantan Clay by Using Waste Glass, HDPE and Carpet Fiber. International Journal of Civil Engineering and Geo-Environmental, 4 . pp. 9-13. ISSN 2180-2742

Ade Chandra, Iwansyah and M. M., Yusoff (2013) Identifikasi Dan Kuantifikasi Asam Galat Sebagai Sumber Antioksidan Pada Ekstrak Daun Kacip Fatimah (Labisia pumila var. alata) Larut Air. Jurnal Aplikasi Teknologi Pangan, 2 (3). pp. 133-138.

Adib, Azmi (2013) Fabrication of a test bed for performance testing of Unmanned Aerial Vehicle (UAV) propulsion system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Adib, Azmi (2013) Fabrication of a test bed for performance testing of Unmanned Aerial Vehicle (UAV) propulsion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adilah, Abd Rashid (2013) The study of drying parameter of carrageenan using spray dryer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Adnan, M. Husein and R. A., Bakar and K., Kadirgama and K. V., Sharma (2013) Experimental Measurements of Nanofluids Thermal Properties. International Journal of Automotive and Mechanical Engineering (IJAME), 7 . pp. 850-863. ISSN 1985-9325(Print); 2180-1606 (Online)

Adnan Mohammed, Hussein and K. V., Sharma and R. A., Bakar and K., Kadirgama (2013) Heat Transfer Enhancement With Nanofluids – A Review. Journal of Mechanical Engineering and Sciences (JMES) , 4 . pp. 452-461. ISSN 2289-4659 (print); 2231-8380 (online)

Adzmil, Abdul Aziz (2013) Analysis of burst pressure on elbow and t-section in the presence of defect. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adzuieen, Nordin and M. Amin, A Majid (2013) Analysis of Carbon Dioxide Emission of Gas Fueled Cogeneration Plant. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10..

Afiq Fikri, Hamid (2013) Development of remotely operated underwater vehicle. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Affendi, Hashim and Mazlina, Abdul Majid (2013) A Study on Colour Combination Guidelines for Text and Background in Web Legibility Perspective. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS 2013) , 20-22 August 2013 , Kuantan, Pahang. pp. 1-10.. (Unpublished)

Ahmad Affendi, Hashim and Mazlina, Abdul Majid and Balsam, A. Mustafa (2013) Legibility of Web Page on Full High Definition Display. In: Advanced Computer Science Applications and Technologies (ACSAT), 23-24 Dec. 2013 , Kuching. pp. 521-524..

Ahmad Afif, Mohd Faudzi and Hirotaka, Takano and Junichi, Murata (2013) A study on Visual Abstraction for Reinforcement Learning Problem Using Learning Vector Quantization. In: Proceedings of SICE Annual Conference (SICE), 14-17 Sept. 2013 , Nagoya, Japan. pp. 1326-1331..

Ahmad Afifi, Ibrahim (2013) Effect of pH and enzyme loading on the protein concentration during collocalia fuciphaga hydrolysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Aizuddin Faiz, Che Jaafar (2013) A study of the spray characteristic for valve covered orifice diesel nozzle injector using CFD. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Alif, Ahmad Adam (2013) Predicting crack pattern on archimedes screw runner blade of micro hydro power. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Amirhilmi, A. Razak (2013) The Study of Two-Phase Flow for Crude Oil Production Using Computational Fluid Dynamics (CFD). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Basirul Subha, Alias and Thegaraju, D. and Sharma, K. V. (2013) Effect of Carbon Nanotube Dispersions to the Palm Oil Diesel-Biodiesel Blend Properties. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-14.. (Unpublished)

Ahmad Faisal, Hasanuddin (2013) DSPTMS320F2812 based variable frequency power inverter. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Ahmad Faiz, Ilyas (2013) Broadcasting real time information using mobile and internet tehcnology on Malaysian super league live score application. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Ahmad Faizal, Mohd Zain and Sabirin, Abdullah and Zeti Akma, Rhazali (2013) Determination of Gyro Frequency from Critical Frequency Measurements Over Parit Raja, Malaysia. In: International Conference on Space Science and Communication (IconSpace), 1-3 July 2013 , Melaka. pp. 440-443..

Ahmad Fathi, Mohd Zainuddin (2013) Performance of lithium polymer battery on electric propulsion system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Fitri, Yusop and Mohd Hafizil, Mat Yasin and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz (2013) PM Emission of Diesel Engines Using Ester-Ethanol-Diesel Blended Fuel. Procedia Engineering, 53 . pp. 530-535. ISSN 1877-7058

Ahmad Hakimi, Abdul Nasir (2013) Development of ammonium perchlorate based solid propellant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Hamidi, Ahmad Hamidi (2013) Decomposition of calcium carbonate in cockle shell. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Hilmy, Agir (2013) Pelajar baharu pelajari budaya keusahawanan dalam kampus. CREATE . p. 23. ISSN 1823-7487

Ahmad Hilmy, Agir (2013) Pusat Keusahawanan bangunkan modul berstruktur kredit dan tidak berkredit. CREATE . p. 21. ISSN 1823-7487

Ahmad Ikmal 'Akif, Abdul Khalil (2013) Design and fabrication of smoke piping system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ahmad Irfan, Ikmal Hisham (2013) Kaedah Hitungan Tempoh Enam Bulan Dua Lahzah Bagi Anak Tak Sah Taraf Serta Furu' Masa'il. In: Muzakarah Falak Kebangsaan Anjuran JAKIM 2013, 27-29 Ogos 2013 , MS Garden Hotel. pp. 1-12.. (Unpublished)

Ahmad Irfan, Ikmal Hisham (2013) Syarat membolehkan pelihara anjing. Berita Harian, (14 Se .

Ahmad Irfan, Ikmal Hisham (2013) Jerebu tindak balas kerakusan manusia. Berita Harian, (6 Aug . p. 38.

Ahmad Irfan, Ikmal Hisham (2013) TITAS: indoktrinasi perpaduan universal. Berita Harian, (19 Ju .

Ahmad Khaidir, Hamzah (2013) E – prestasi pensyarah (lecturer performance evaluation system). Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Ahmad Najmuddin, Ibrahim (2013) Experimental development of stiffness-variable foot sole mechanism for bipedal robots. Masters thesis, Ibaraki University, Japan.

Ahmad Nor Kasruddin, Nasir and Tokhi, M. O. and Nor Maniha, Abd Ghani (2013) Novel Hybrid Bacterial Foraging and Spiral Dynamics Algorithms. In: Proceeding of The 13th Annual UK Workshop on Computational Intelligence UKCI 2013, September 9-11, 2013 , University of Surrey, Guildford, United Kingdom. pp. 199-205..

Ahmad Nor Kasruddin, Nasir and Tokhi, M. O. and Sayidmarie, O. and Raja Mohd Taufika, Raja Ismail (2013) A Novel Adaptive Spiral Dynamic Algorithm for Global Optimization. In: Proceeding of The 13th Annual UK Workshop on Computational Intelligence UKCI 2013, September 9-11, 2013 , University of Surrey, Guildford, United Kingdom. pp. 334-341..

Ahmad Nor Kasruddin, Nasir and Tokhi, M. Osman (2013) A Novel Hybrid Spiral-Dynamics Random-Chemotaxis Optimization Algorithm With Application To Modelling Of A Flexible Robot Manipulator. In: The Sixteenth International Conference on Climbing and Walking Robots, 14-17 July 2013 , Sydney, Australia. pp. 667-674.. ISSN 978-981-4525-52-7

Ahmad Nur Zakwan, Ahmad Nazari (2013) Machinability study of high thermal conductivity tool steel (HTSC-150 ) in hot press die. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Rasdan, Ismail and Shashi Kumar, S A Karagaratnan and K., Kadirgama (2013) Thermal Comfort Findings: Scenario At Malaysian Automotive Industry. Thermal Science, 17 (2). pp. 387-396.

Ahmad Rasyidi, Abd Razak (2013) Development and implementation of a fuzzy logic controller for a high performance battery charging system using microcontroller. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Ahmad Rosli, Abdul Manaf and Mohd Zairulnizam, Mohd Zawawi and Nik Zuraida, Imran Adly (2013) Thin Walled Part Warping Overcoming by Honeycomb Ribs Design. Advanced Materials Research, 903 . pp. 181-186. ISSN 1022-6680 (print), 1662-8985 (online)

Ahmad Saifudin, Mohd Kamel (2013) Ump's grant performance between January and May, 2013. Quest, 9 (5). pp. 4-5. ISSN 1985-8159

Ahmad Shahir, Jamaludin (2013) Development of fem model for high speed machining using small ball end milling processes. Masters thesis, Universiti Malaysia Sarawak.

Ahmad Syafiq, Shiro (2013) Energy projection analysis of solar energy for water pump system using gridline power with focus on control system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syazwan, Ahmad Tarmizi (2013) Bezacube web based application systems. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Ahmad Taufiq, Ayub (2013) Biomechanics and measurement on archery athlete: balancing body posture. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ahmad Zainul Ariffin, Mohamad (2013) Optimal design of electric bicycle (electric bicycle motor). Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Ahmad Zakki, Jilan (2013) Siswa UMP ambil BB1M. Utusan Malaysia .

Ahmad Ziad, Sulaiman (2013) UMP lahir graduan sulung Sarjana Kejuruteraan Kimia dengan Keusahawanan. CREATE . p. 10. ISSN 1823-7487

Ahmad Ziad, Sulaiman (2013) UMP latih usahawan mengenai pengekstrakan dan teknik pemprosesan herba. CREATE . p. 31. ISSN 1823-7487

Ahmed, Irfan and Fakharuddin, Azhar and Mohd Hasbi, Ab. Rahim and Rajan, Jose (2013) Electrospun Hematite Nanowires for Photoelectrochemical Cell. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET), 3-4 December 2013 , MS Garden Hotel, Kuantan. pp. 1-2..

Aidil Amsyar, Mohd Azamee (2013) Eco home monitoring system. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Aina Syafiza, Jamalulail (2013) To study and recommend measures to make fkm administration block be more energy efficient. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ainal Marhaton, Abd Ghani (2013) Kayuhan cegah jenayah.

Ainal Marhaton, Abd Ghani (2013) Penghidap SMA cemerlang akademik. Berita Harian .

Aini, Ahmad (2013) Islamic Perspective of the Learning Organization. In: Handbook of Research on the Learning Organization: Adaptation and Context. Edward Elgar Publishing, UK, pp. 145-156. ISBN 9781781004890 (print); 9781781004906 (ebook)

Aiza, Abd Rahman (2013) Kinetic study of acetic acid production from banana stem waste using soil bacteria, Bacillus Thuringiensis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aizat, Alias and Fadilah, Sapawi and Kusbiantoro, Andri and Mohammad Amirulkhairi, Zubir and Ahmad Baharuddin, Abdul Rahman (2013) Performance of Grouted Splice Sleeve Connector Under Tensile Load. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Aizat, Alias and Mohammad Amirulkhairi, Zubir and Khairul Anuar, Shahid and Ahmad Baharuddin, Abdul Rahman (2013) Structural Performance of Grouted Sleeve Connectors with and without Transverse Reinforcement for Precast Concrete Structure. Procedia Engineering, 53 . pp. 116-123. ISSN 1877-7058

Akhtar, Muhammad Nadeem and Nadiah, Abu and Wan, Yong Ho and Swee, Keong Yeap and Noorjahan Banu, Alitheen (2013) 3-Bromo-1-Hydroxy-9,10-Anthraquinone (BHAQ) Inhibits Growth and Migration of the Human Breast Cancer Cell Lines MCF-7 and MDA-MB231. Molecules, 18 (9). pp. 10367-10377. ISSN 1420-3049 (print); 1420-3049 (online)

Akhtar, Muhammad Nadeem and Nadiah, Abu and Wan, Yong Ho and Swee, Keong Yeap and Mohd Puad, Abdullah and Abdul Rahman, Omar and Noorjahan Banu, Alitheen (2013) The Flavokawains: Uprising Medicinal Chalcones. Cancer Cell International, 13 (201). pp. 1-7. ISSN 1475-2867 (print); 1475-2867 (online)

Akhtar, Muhammad Nadeem and Noor Azlina, Abu Bakar and Mohd Roslan, Sulaiman and Nordin, Lajis and Akira Omar, Farouk (2013) Participation of Large Ca2+ Activated Potassium Channel in Antinociceptive Activity of Chalcone Derivative (3-(2, 5-dimethoxyphenyl)-1-(5-methylfuran-2-yl) prop-2-en-1-one) DMPF-1 Action in Mice Model. In: 3rd International Conference on Medical, Biological and Pharmaceutical Sciences (ICMBPS'2013), 4-5 January 2013 , Bali, Indonesia. pp. 204-206..

Akhtar, Muhammad Nadeem and Shaik Ibrahim, Khalivulla and Lee, Ming-Tatt and Nordin, Lajis and Enoch Kumar, Perimal and Ahmad, Akira and Daud Israf, Ali and Mohd Roslan, Sulaiman (2013) Anti-hyperalgesic Effect of a Benzilidine-cyclohexanone Analogue on a Mouse Model of Chronic Constriction Injury-induced Neuropathic Pain: Participation of the κ-opioid Receptor and KATP. Pharmacology Biochemistry and Behavior, 114-115 . pp. 58-63. ISSN 0091-3057 (print); 1873-5177 (online)

Akhtar, Muhammad Nadeem and Yar, Muhammad and Mushtaq, Nafeesa and Afzal, Sadia and Khan, Abdul Samad and Khan, Islam Ullah and Zareen, Seema and Shahzad, Sohail Anjum and Khan, Zulfiqar Ali and Naqvi, Syed Ali Raza and Mahmood, Nasir and Tahir, Lubna (2013) Synthesis, Biological Evaluation and Study of the Effect of Various N-Substituents on the Thermal Stabilities of Some New Diethanolamine Derivatives. Asian Journal of Chemistry , 25 (13). pp. 7297-7304. ISSN 0970-7077

Akhtar, Muhammad Nadeem and Zareen, Seema and Swee, Keong Yeap and Wan, Yong Ho and Kong, Mun Lo and Hasan, Aurangzeb and Noorjahan Banu, Alitheen (2013) Total Synthesis, Cytotoxic Effects of Damnacanthal, Nordamnacanthal and Related Anthraquinone Analogues. Molecules, 18 (8). pp. 10042-10055. ISSN 1420-3049 (print); 1420-3049 (online)

Akhtar, Muhammad Nadeem and Mohd Nasier, Kamaldin and Azam Shah, Mohamad and Lajis, Nordin and Perimal, Enoch Kumar and Akira, Ahmad and Lee, Ming-Tatt and Israf, Daud Ahmad and Mohd Roslan, Sulaiman (2013) Peripheral Antinociception of a Chalcone, Flavokawin B and Possible Involvement of the Nitric Oxide/Cyclic Guanosine Monophosphate/Potassium Channels Pathway. Molecules, 18 (4). pp. 4209-4220. ISSN 1420-3049 (print); 1420-3049 (online)

Akhtar, Muhammad Nadeem and Shahzadi, Tayyab and Abbasi, Muhammad Athar and Ur-Rehman, Aziz and Riaz, Tauheed and Khan, Khalid Mohammed and Mohd Ashraf, Ahmad and Afzal, Iftikhar and Ajaib, Muhammad (2013) Antioxidant and Lipoxygenase Inhibiting New Iridoid Glucosides from Caryopteris Odorata. Natural Product Research: Formerly Natural Product Letters, 27 (4-5). pp. 302-313. ISSN 1478-6419 (print); 1478-6427 (online)

Akhwanzada, Salman A. and Razman, Mat Tahar (2013) Analyzing the Effect of Feed-in Tariff and Reserve Margin on Renewable Generation Capacity Expansion. In: Business Engineering and Industrial Applications Colloquium (BEIAC), 2013 IEEE , 7-9 April 2013 , Langkawi, Kedah. pp. 714-718..

Akmalhabibi, Rosli (2013) Condition monitoring of faculty air conditioning system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Al, Muhandisah (2013) Kejuruteraan kimia di dalam al-Quran. Utusan Malaysia, (1 Nov .

Al-Dabbagh, Jinan B. and M., Ishak and Rozman, Mohd Tahar and Siti Aisyah, Harun (2013) Effect of the Milling Parameters on the Characteristics of Ti-50%Al Nanocrystallite Synthesized by Mechanical Alloying (MA). International Journal of Engineering Research & Technology (IJERT), 2 (8). pp. 2113-2119. ISSN 2278-0181

Al-Sameraai, Raafat Salih Hadi and Kamarul Hawari, Ghazali and Zeehaida, Mohamed (2013) Automated System for Diagnosis Intestinal Parasites by Computerized Image Analysis. Modern Applied Science, 7 (5). pp. 98-114. ISSN 1913-1844 (printed), 1913-1852 (online)

Al-Sameraai, Raafat Salih Hadi and Zulkeflee, Kalidin and Kamarul Hawari, Ghazali and Zeehaida, Mohamed (2013) Automated Fecal Parasite Detection System. American Journal of Scientific Research, Issue . pp. 87-96. ISSN 2301-2005 (1450-223x)

Ali, Eman N. and Nazik, Musa (2013) An investigation of Anti -Cancer Activity of Moringa Oleifera Leaves. In: 11th International Symposium on Biocontrol and Biotechnology (ISBB 2013), 1 - 4 October 2013 , Alexandria-Egypt. pp. 1-6..

Ali, Eman N. and Tay, Cadence Isis (2013) Characterization of Biodiesel Produced from Palm Oil via Base Catalyzed Transesterification. Procedia Engineering, 53 . pp. 7-12. ISSN 1877-7058

Ali, A. J. Adham and Ahmad Nazif, Noor Kamar and Abdullah, Ibrahim and Sorooshian, Shahryar (2013) Simulation Model and Genetic Algorithm to Assembly Line Balancing. International Journal of Technology Management, 2 . pp. 63-72. ISSN 2289-2753

Ali, Abdul Rahman and Najmuldeen, Ghazi Faisal (2013) Effects of Adding Alcohols, Electrolytes and Carboxyl Methyl Cellulose (CMC) on Design Parameters in Internal Loop Airlift Bubble Column. International Journal of Engineering Sciences & Research Technology, 2 (12). pp. 3415-3426. ISSN 2277-9655

Ali, Gomaa A. M. and Fouad, Osama A. and Makhlouf, Salah A. (2013) Structural, Optical and Electrical Properties of Sol–Gel Prepared Mesoporous Co3O4/SiO2 Nanocomposites. Journal of Alloys and Compounds, 579 . pp. 606-611. ISSN 0925-8388 (print), 1873-4669 (online)

Ali, Mahmood (2013) Siswa UMP bantu mangsa banjir lumpur. Utusan Malaysia .

Alkasasbeh, Hamzeh Taha and Mohd Zuki, Salleh and Razman, Mat Tahar and Roslinda, Nazar (2013) Effect of Radiation on Magnetohydrodynamic Free Convection Boundary Layer Flow on a Solid Sphere with Newtonian Heating. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-3..

Almeshal, A. M. and Goher, K. M. and Ahmad Nor Kasruddin, Nasir and Tokhi, M. O. and Agouri, S. A. (2013) Hybrid Spiral Dynamic Bacterial Chemotaxis Ooptimisation For Hybrid Fuzzy Logic Control Of A Novel Two Wheeled Robotic Vehicle. In: Sixteenth International Conference on Climbing and Walking Robots CLAWAR 2013, 14 – 17 July 2013 , Sydney, Australia. pp. 179-188..

Aman, Ahamad (2013) Fluid structural interface of force excitation on pipeline elbow joint. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Amatul, Zehra and Tuty Asmawaty, Abdul Kadir and M.A. M., Aznan (2013) A Comparative Study on the Pre-Processing and Mining of Pima Indian Diabetes Dataset. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS - 2013), 20-22 August 2013 , Universiti Malaysia Pahang. pp. 1-10..

Amierul Amin, Abdul Aziz (2013) Fabrication of aquaponic gravity flow plantation system for lettuce plant. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Amin Khairi, Rosli (2013) Automatic temperature control system for aquaponic green house. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Amina, Yasin and Rajan, Jose and M. M., Yusoff (2013) Quantum Chemical Simulation of Molecular Structures for High Efficiency Solar Cells. In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Amir, Azizi and Amir Yazid, Ali and Loh, Wei Ping (2013) An Adaptive Neuro-Fuzzy Inference System for a Dynamic Production Environment under Uncertainties. World Applied Sciences Journal, 25 (3). pp. 428-433. ISSN 1818-4952

Amir, Azizi and Darestani, Soroush Avakh and Ghavami, Samane (2013) Supply Chain Management: Supplier Selection Problem with Multi-objective Considering Incremental Discount. In: Asia Pacific Industrial Engineering and Management System 2013, 3-6 December 2013 , Cebu, Philippines. pp. 1-9..

Amir, Aziz and R., Mamat and W. K., Wan Ali (2013) Development of Strand Burner for Solid Propellant Burning Rate Studies. In: 2nd International Conference on Mechanical Engineering Research (ICMER 2013) . pp. 1-8..

Amir, Aziz and R., Mamat and W. K., Wan Ali (2013) Low Pressure Strand Burner for Solid Propellant Burning Rate Studies. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

Amir Izzani, Mohamed (2013) Space charge behavior in polymeric insulating materials under DC stress and pre-breakdown phenomena. PhD thesis, Ehime University JAPAN.

Amir Syahmi, Nordin (2013) Effect of different cooling rate on integrated circuit (ic) package. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Amirul Izwan, Abdullah (2013) Design and fabrication of tandem rear part. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Amran, Kamarudzaman (2013) Potential solid waste conversion for power generation (with case studies in Pekan and Rompin). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Anas Basri, Musthafa (2013) Experimental and numerical investigation on part thicknesses effects in tailor welded blank process. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Anas Muzamil, Hamiddin (2013) Design of synchronous serial communication to control pitches of angklung. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Andalib, Tarnima Warda (2013) Human Rights in Human Resources Management: A Comparison Study of Technology Industries between Bangladesh and Malaysia. In: 6th International Economics and Business Management Conference (IEBMC 2013), 2-4 October 2013 , Kuantan, Pahang. pp. 1-17..

Andalib, Tarnima Warda and Mohd Ridzuan, Darun and Azlinna, Azizan (2013) Frustration of Employees: Reasons, Dimensions and Resolving Techniques. In: Proceeding of the World Conference on Integration of Knowledge (WCIK 2013), 25-26 November 2013 , Langkawi, Kedah. pp. 15-25..

Andrew, Yau-hau Tse (2013) The Notion of Self-Access Language Learning in Malaysia. In: Annual Multidisiplinary Conference Munich 2013, 23-26 June 2013 , Hotel IBIS, Munich, German. pp. 1-6.. (Unpublished)

Ang, Chun How (2013) Photocatalysis of glycerol solution. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Angelina, Lawrence (2013) Effects of thickness difference and loading direction on fatigue properties of tailored welded blanks. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Anis Hazwana, Mohamad Wazir (2013) Design of MIDI decoder for auto angklung. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Anis Syarliza, Ahmad (2013) Modeling, simulation and experimental verification of hydraulic servo system. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Anita, Abdul Rani and Aini, Ahmad (2013) Jurnal Kecerdasan Spiritual Pekerja Pentadbiran. Penerbit UMP, Kuantan.

Anita, Abdul Rani and Imaduddin, Abidin and M. R., Abdul Hamid (2013) The Impact of Spiritual Intelligence on Work Performance: Case Studies in Government Hospitals of East Coast of Malaysia. The Macrotheme Review , 2 (3). pp. 46-59. ISSN 1848-4735

Anuj, Kumar (2013) Influence of nanofillers on the properties of urea formaldehyde resin and medium density fiberboard. PhD thesis, Universiti Malaysia Pahang.

Anuj, Kumar and Gupta, Arun and K. V., Sharma and Mohammed, Nasir and Khan, Tanveer Ahmed (2013) Influence of Activated Charcoal as Filler on the Properties of Wood Composites. International Journal of Adhesion and Adhesives, 46 . pp. 34-39. ISSN 0143-7496

Anwar, P. P. A. Majeed and Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris and Nina Nadia, Sahim (2013) An Overview Of Sports Engineering: History, Impact And Research. Movement, Health & Exercise (MoHE), 2 . pp. 1-14. ISSN 2231-9409

Appalasuwami, Sasikala and Jahir Hussain, Fathima Shahitha and M. M., Yusoff (2013) HEC Capped Silver Nanoparticles - Synthesis, Characterization and Its Application. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Aqilah, Yahya (2013) Biodiesel production from moringa oleifera seeds using heterogeneous acid and alkali catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ardiansyah, Soleh and Mazlina, Abdul Majid and Jasni, Mohamad Zain (2013) Applying Artificial Neural Networks in Forecasting US Dollars-Indonesian Rupiah Exchange. In: The 2013 International Conference on Computer Science and Information Technology (CSIT-2013), 16-18 June 2013 , Jogjakarta, Indonesia. pp. 1-5..

Ardiansyah, Soleh and Mazlina, Abdul Majid and Jasni, Mohamad Zain (2013) The Use of Artificial Neural Network for Forecasting of FTSE Bursa Malaysia KLCI Stock Price Index. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS 2013) , 20-22 August 2013 , Kuantan, Pahang. pp. 1-9.. (Unpublished)

Arif Hanafi, Sharif Katullah (2013) Data transmission using aes encryption via email and sms. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Ariffin, Abdullah (2013) Vibration suppression of flexible beam using electromagnetic shunt damper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

As Eleyana, Ali (2013) Modelling and Environmental Assessment of Heterogeneous Catalysis Biodiesel Process Using War Algorithm. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Asdarina, Yahya (2013) Encouraging achievement in external grant performance. Quest, 10 (6). p. 12. ISSN 1985-8159

Asdarina, Yahya (2013) Working visits to MARDI, Nasuha Herb Farm and Bogor Agricultural Institute. Quest, 9 (5). p. 6. ISSN 1985-8159

Asdarina, Yahya and R. M., Yunus (2013) Influence of Sample Preparation and Extraction Time on Chemical Composition of Steam Distillation Derived Patchouli Oil. Procedia Engineering, 53 . pp. 1-6. ISSN 1877-7058

Ashaari, Ibrahim (2013) The effect of torch distance on weldability of dissimilar welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Asmadi, Ali @ Mahmud (2013) Synthesis, Characterizationa Performance of Polysulfone/Cellulose Acetate Phthalate/ Polyvinylpyrrolidone (Psf/CAP/PVP) Blend Ultrafiltration Membranes. PhD thesis, Universiti Malaysia Pahang.

Asmadiyana, Mahadi (2013) Feasibility study on locally isolated strain for butanol production by using oil palm trunk sap. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Asmara, Y. P. and Juliawati, Alias and Ahmad Shahrizan, Sulaiman and Jamiluddin, Jaafar (2013) Mechanistic Model of Stress Corrosion Cracking (SCC) of Carbon Steel in Acidic Solution with Presence of H2s. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online)

Atabani, A. E. and Mahlia, T. M. I. and Masjuki, H. H. and Irfan Anjum, Badruddin and Wan Mohd Hafizuddin, Wan Yussof and Chong, W. T. and Teong Lee, Keat (2013) A Comparative Evaluation of Physical and Chemical Properties of Biodiesel Synthesized from Edible and Non-Edible Oils and Study on the Effect of Biodiesel Blending. Energy, 58 . pp. 296-304. ISSN 0360-5442 (Print), 1873-6785 (Online)

Atikah, Mad Nawi (2013) Formulation of Shampoo From Keratin Protein. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Avazpour, Mahrokh and Lutfor, M. R. and M. M., Yusoff and Hegde, Gurumurthy (2013) Photosensitive Bent Core Liquid Crystal for Optical Storage Devices. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET) , 3-4 December 2013 , MS Garden Hotel Kuantan, Pahang. pp. 1-2..

Awang Shri, Dayangku Noorfazidah and Tsuchiya, Koichi and Yamamoto, Akiko (2013) Surface Characterization of TiNi Deformed by High-pressure Torsion. Applied Surface Science, 289 . pp. 338-344. ISSN 0169-4332

Ayib Rosdi, Zainun and M., Ichimura (2013) Performance of n-TiO2/dye/p-Cul Incorporated with New Chelating Agent for Solid State DYE Sensitized Solar Cell Applications. In: 8th International Conference on Surface, Coatings and Nanostructured Materials (Nanosmat 2013), 22-25 September 2013 , Granada, Spain. pp. 1-12..

Ayuni Athirah, Azman (2013) Effect of ph solution on the water absorbency of superabsorbent polymer composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azian, Othman (2013) Investigation on the potential of orange peel waste in the production of useful homemade solution. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aziee Edna Diawati, Hazwan (2013) Modal analysis on different type of aluminium, joined by tig welding. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Aziman, Abdullah (2013) My Strategy in PhD Application. Bit@FSKKP . pp. 14-16. ISSN 1985-7969

Azizi, Amir (2013) An Integrated Approach Based on SARIMA and Bayesian to Estimate Production Throughput under Five Random Variables. In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-12..

Azizi, Amir and Hosseini, Seyed Mehrshad Parvin and Lin, Lau Sow (2013) A study on the Export of Small and Medium Enterprises in the Manufacturing. In: Proceedings of International Conference on Business, Accounting, Finance, and Economics (BAFE 2013), 4 October 2013 , Universiti Tunku Abdul Rahman, Kampar, Perak. pp. 285-293..

Azizi, Amir and Sorooshian, Shahryar (2013) Fuzzy Bases. World Applied Sciences Journal, 26 (10). pp. 1335-1339. ISSN 1818-4952

Azma, Abdullah and Liu, Shaoying (2013) Hazard Analysis for Safety-critical Systems Using SOFL. In: 2013 IEEE Symposium on Computational Intelligence for Engineering Solutions (CIES 2013), 16 April 2013 , Singapore. pp. 133-140..

Azmah Hanim, Mohamad Ariff and Ourdjini, Ali and Saliza Azlina, Osman and Siti Rabiatull Aisha, Idris (2013) Intermetallic Evolution for Isothermal Aging up to 2000 Hours on Sn-4Ag-0.5Cu and Sn-37Pb Solders with Ni/Au Layers. International Journal of Automotive and Mechanical Engineering (IJAME), 8 . pp. 1348-1356. ISSN 1985-9325(Print); 2180-1606 (Online)

Azmi, W. H. and K. V., Sharma and R., Mamat and Shahrani, Anuar (2013) Nanofluid Properties For Forced Convection Heat Transfer: An Overview. Journal of Mechanical Engineering and Sciences (JMES) , 4 . pp. 397-408. ISSN 2289-4659 (print); 2231-8380 (online)

Azmi, W. H. and Sharma, K. V. and R., Mamat and Shahrani, Anuar (2013) Turbulent Forced Convection Heat Transfer of Nanofluids with Twisted Tape Insert in a Plain Tube. Energy Procedia, 52 . pp. 296-307. ISSN 1876-6102

Azmi, W. H. and Sharma, K. V. and Sarma, P. K. and R., Mamat and Shahrani, Anuar and V. Dharma, Rao (2013) Experimental Determination of Turbulent Forced Convection Heat Transfer and Friction Factor with SiO2 Nanofluid. Experimental Thermal and Fluid Science, 51 . pp. 103-111. ISSN 0894-1777

Azni Yusra, Ahmad Kasmiri (2013) Developments of 2 Inches Loop Pipelines for Paraffin Deposition Testing Facility Using Plant Design Management System (PDMS). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Azri, Marmoh (2013) Optimal design of heat recovery system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azri, Alias (2013) Evaluation of various estimation equations for particle-fluid interaction forces and modeling of heat transfer between particles for dem simulations. PhD thesis, Okayama University of Science.

Azrulrizawati, Abd Hamid (2013) Characterisation and Biological Activities of Tinospora Crispa (Menispermaceae) Extract with Emphasis on Alkaloids. PhD thesis, Universiti Malaysia Pahang.

Azuan, Ismail (2013) Railroad inspector for railroad department in Malaysia /. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

B

Badariah, Mohd Nasir (2013) The Effect of Extraction Parameters on Antioxidant Activity of Cosmos Caudatus. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Badhrulhisham, Abdul Aziz (2013) Establishment of Malaysian Rare Earth Industry as Contribution to the Green Technology Initiatives. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2013), 3-4 December 2013 , MS Garden Hotel, Kuantan. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Future Direction and Challenges of Engineering Technology in Malaysia. In: Science and Engineering Technology National Conference (SETNC) 2013, 3-4 July 2013 , Bandar Baru Bangi, Selangor, Malaysia. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Future Direction and Challenges of Malaysian Rare Earth Industry as a Potential Green Economy Engine. In: International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2013), 28 - 29 August 2013 , Kuantan, Pahang. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Knowledge Application Generates Transformation. In: National Conference on Engineering Technology (NCET) 2013, 1-2 July 2013 , Shah Alam, Selangor. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Malaysian Board of Technology (MBOT) and The Future of Technicians. In: Inaugural National Conference for Technicians and TVET Semi-Professionals, 7 Oct 2013 , Kuching, Sarawak. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Melayu Islam dan Cabaran. In: Persidangan Kebangsaan Pegawai MARA Daerah, 9 December 2013 , Melaka. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Roles and Contribution Of Universities in Managing Controversial Issues in Community: Case Study Of UMP’s Involvement in Lynas Project. In: National Conference on Higher Education Institution and Community Engagement, 26-27 August 2013 , Universiti Malaysia Kelantan, Jeli, Kelantan. . (Unpublished)

Badshah, Gran and Liew, Siau-Chuin and Jasni, Mohamad Zain and Syifak Izhar, Hisham (2013) Watermark Compression in Digital Medical Image Watermarking. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. . (Unpublished)

Bahrun, Mohd Shakir (2013) Production of Modified Cassava Flour (MOCAF). Masters thesis, Universiti Malaysia Pahang.

Balqis, Adam (2013) Development of natural adhesive using lignin and soy protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Bariah, Yusob and Siti Mariyam, Shamsuddin and Haza Nuzly, Abdull Hamed (2013) Spiking Self-organizing Maps for Classification Problem. Procedia Technology, 11 . pp. 57-64. ISSN 2212-0173

Bashar, S. Mohammed and Cheng, Hock Tian (2013) Immediate Deflection of Pretensioned Inverted T-Beam with Circular Web Openings Strengthened with GFRP Using Response Surface Methodology. Key Engineering Materials, 594/95 . pp. 516-520. ISSN 1013-9826 (print); 1662-9795 (online)

Bastian Wibar, Momang (2013) Design analysis of exterior car body part. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Beg, Abul Hashem and Noraziah, Ahmad and A. N., Abdalla and Rabbi, Khandakar Fazley (2013) Framework of Persistence Layer Synchronous Replication to Improve Data Availability into a Heterogeneous System. International Journal of Computer Theory and Engineering, 5 (4). pp. 611-615. ISSN 1793-8201

Beg, M. D. H. and M. R., Islam (2013) Characterization of Laccase-Treated Kenaf Fibre Reinforced Recycled Polypropylene Composites. BioResources, 8 (3). pp. 3753-3770. ISSN 1930-2126 (print); 1930-2126 (online)

Beh, Alicia (2013) Analysis and countermeasure to improve production system performance by using overall equipment effectiveness at bi technologies sdn. Bhd. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Bello, Ibrahim Garko (2013) Development of new green demulsifier composition for oil production. Masters thesis, Universiti Malaysia Pahang.

Bhuiyan, Md. Khairul Hassan and Rahman, Md. Mahbubur and Mina, Md. Forhad and M. R., Islam and Gafur, Md. Abdul and Begum, Afia (2013) Crystalline Morphology and Properties of Multi-walled Carbon Nanotube Filled Isotactic Polypropylene Nanocomposites: Influence of Filler Size and Loading. Composites Part A: Applied Science and Manufacturing, 52 . pp. 70-79. ISSN 1359-835X

Billy Zhi Yang, Chang (2013) Compression in image recovery watermarking using PNG (Portable Network Graphic). Faculty of Computer System & Software Engineering , Universiti Malaysia Pahang.

C

Chai Siew, Li (2013) Employing Psychoacoustic Model for Digital Audio Watermarking. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Chan, Christoper Sing Kong (2013) Energy projection analysis of solar energy for water pump system using gridline power with focus on control system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Chan, Neol Christopher (2013) Analysis of spindle cooling system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Changkari, Ravindran (2013) A study on food quality dimensions of 3 in 1 instant packet drink. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Che Ahmad Arif, Che Mud (2013) Separation of aromatic from aliphatic by using [EIM][ETSO4] ionic liquid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Che Azral Izzuddin, Che Rudi (2013) Finite element based fatique analysis of aluminium tailor welded blanks. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Che Engku Nuzuwal Ikram, Che Engku Abdullah (2013) Design and development an ergonomic SMED’s external prerparation for small press die at FKP lab /. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Che Ku Eddy Nizwan, Che Ku Husin and S. A., Ong and Mohd Fadhlan, Mohd Yusof and Mohamad Zairi, Baharom (2013) A Wavelet Decomposition Analysis of Vibration Signal for Bearing Fault Detection. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

Chee Wei, Wong (2013) Study on domestic waste water treated using modified rice husk sequences slow sand filter (MRHSSSF). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chen, Rui (2013) Development of compressed air powered engine system based on subaru ea71 model. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Cheong, Kok Soon (2013) Fiinite element analysis on multi-plane defects of ASTM 106 steel pipe. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chew, Hong Ping (2013) Sinusoidal PWM controller of voltage source inverter for better efficiency of three phase induction motor. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chew Sin, Seng (2013) Courseware for Driving Simulation. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Chia, Ming Xuan (2013) Clustering of frequency-based vibration signal for bearing fault detection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chia Meng, Sia (2013) Detection of presence marks in stegocontent. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Chin, Siew Choo and Shafiq, Nasir and Nuruddin, Muhd Fadhil (2013) Effects of Large Openings in the Shear Zone of Reinforced Concrete Beams. Malaysian Construction Research Journal, 13 (2). ISSN 1985-3807

Chin, S. Y. and Anwaruddin, Hisyam and Norul Shahida, Che Din and Haniif, Prasetiawan and Abdullah, Azahari and Ikmal Hisham, Maharon (2013) Reactor Modeling and Simulation for Intensifying The Propylene Production In A Petrochemical Plant. In: 1st National Conference on Knowledge Transfer (KTP 01), 21 - 23 August 2013 , Hotel Equatorial Bangi, Selangor. pp. 1-10.. (Unpublished)

Chin, Sui Yee (2013) Hand gesture based user interface system. Faculty Of Computer System And Software Engineering, Universiti Malaysia Pahang.

Chin Ming, Lee (2013) Web based integrated food ordering system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chin Weng, Foo (2013) Membrane Application in the Recovery of Gaharu Active Marker Compound from Water Mixture. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Ching, Geraldine Chan Sue (2013) Study on the effect of clay loading under normal and auto-thermal extrusion to the morphology structure and thermal properties of nylon 6 nanocomposites. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ching, Mah Yoke (2013) Serious game for internal medical practice (crowd simulation). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ching, Ng Choon (2013) Rough set based clustering for finding relevant document /. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chong, Michael Ka Wai (2013) PSM / PTA evaluation web management system. Faculty Of Computer System And Software Engineering, Universiti Malaysia Pahang.

Chowdhury, M. A. and Nuruzzaman, D. M. and Kumar Roy, Biplov and M. M., Rahman and Md. Shahin, Mia and Md. Rashed, Mia and Shazib, Bhumik (2013) Experimental Investigation of Friction Coefficient and Wear Rate of Different Sliding Pairs. World Applied Sciences Journal, 28 (5). pp. 608-619. ISSN 1818-4952

Chowdhury, M. A. and Nuruzzaman, D. M. and Roy, Biplov Kumar (2013) Experimental Investigation of Friction Coefficient and Wear Rate of Stainless Steel 304 Sliding against Smooth and Rough Mild Steel Counterfaces. Gazi University Journal of Science, 26 (4). pp. 597-609.

Chowdhury, M. N. K. and Beg, M. D. H. and Khan, Maksudur R. (2013) Biodegradability of Nanoparticle Modified Fiber Reinforced Polyester Resin Nanocomposite. Procedia Engineering, 68 . pp. 431-438. ISSN 1877-7058

Chowdhury, M. N. K. and Beg, M. D. H. and Khan, Md. Ashikur Rahman and M. F., Fina (2013) Modification of Oil Palm Empty Fruit Bunch Fibers by Nanoparticle Impregnation and Alkali Treatment. Cellulose, 20 (3). pp. 1477-1490. ISSN 0969-0239

Chowdhury, M. N. K. and M. F., Fina and Khan, Maksudur R. and Beg, M. D. H. (2013) Cu Nanoparticles for Improving the Mechanical Performances of Oil Palm Empty Fruit Bunch Fibers as Analyzed by Weibull Model. Polymer Bulletin, 70 (11). pp. 3103-3113. ISSN 0170-0839(Print); 1436-2449(Online)

Chowdhury, Mohammad Asaduzzaman and Nuruzzaman, D. M. and Roy, Biplov Kumar and Rahman, Muhammad Mahmudur and Azad, Md. Abul Kalam and Rahman, Md.Mijanur and Bhumik, Shazib (2013) Friction Coefficient and Wear Rate of Copper Mating with Smooth and Rough Stainless Steel 304 Counterfaces. Journal of American Science, 9 (5). pp. 361-368. ISSN 1545-1003 (Print); 2375-7264 (Online)

Choy Chok, Hong (2013) Information retrieval using LUCENE. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Chua, Gek Kee and Abdul-Rahman, Badarulhisam and Chisti, Yusuf (2013) Production and Scale-Up of a Monoclonal Antibody Against 17-Hydroxyprogesterone. Biotechnology Progress, 29 (1). pp. 154-164. ISSN 1520-6033

Chua, Yee Leong (2013) Productivity improvement in SME industry through new plant layout design by using witness software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chuen, Teh Yung (2013) Dynamic timetable generator using particle swarm optimization (PSO) method. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

D

Dayangku Siti Nur Baizura, Awangku Matali (2013) A study of the characteristics of thunderstorm. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Dhiyatul Ridhwan, Md Nasarudin (2013) Potential evaluation oil palm frond juice for bioethanol fermentation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Diana Erika, Phillip (2013) Evaluation of plasticity of Kuantan clayey soil stabilized by rcycle and reuse material mixed with lime. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Dina Diyana, Rastam Tan (2013) A system dynamic approach in human resource planning in oil and gas industry. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Djojodihardjo, H. and M. F., Abdul Hamid and Abdul Aziz, Jaafar and Shah Nor, Basri and F. I., Romli and F., Mustapha and A. S., Mohd Rafie and D. L. A., Abdul Majid (2013) Computational Study on the Aerodynamic Performance of Wind Turbine Airfoil Fitted with Coanda Jet. Journal of Renewable Energy, 2013 . pp. 1-17.

E

E., Baranitharan and Khan, Maksudur R. and D. M. R., Prasad and Jailani, Salihon (2013) Bioelectricity Generation from Palm Oil Mill Effluent in Microbial Fuel Cell Using Polacrylonitrile Carbon Felt as Electrode. Water, Air and Soil Pollution , 224 (1533). pp. 1-11. ISSN 0049-6979 (print); 1573-2932 (online)

E., Baranitharan and Khan, Maksudur R. and D. M. R., Prasad and Jailani, Salihon (2013) Effects of Electrode Materials on Power Generation of Microbial Fuel Cell. In: 2nd International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB) 2013, 28-29 August 2013 , Zenith Hotel, Kuantan. pp. 1-6.. (Unpublished)

Edzamila, Dzaidi (2013) Development of once per revolution sensor chatter. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

El-Hadad, Omar (2013) Introducing a New Technology for Seawater Treatment With Solar Energy. In: Water Malaysia 2013, 23-25 April 2013 , Kuala Lumpur Convention Centre. . (Unpublished)

Elexanderio Julit, Iling (2013) Development of wireless ignition system (WISys) for solid rocket motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Elrasheed Ismail, Sultan (2013) Quantum Particle Swarm Optimization Technique for Load Balancing in Cloud Computing. PhD thesis, Universiti Malaysia Pahang.

Elumalai, Naveen Kumar and Tan, Mein Jin and Vijila, Chellappan and Rajan, Jose and Suresh Kumar, Palaniswam and Sundaramurthy, Jayaraman and Hemant, Kumar Raut and Seeram, Ramakrishna (2013) Electrospun ZnO Nanowire Plantations in the Electron Transport Layer for High-Efficiency Inverted Organic Solar Cells. Applied Materials & Interfaces, 5 (19). pp. 9396-9404.

Emine, Seydametova (2013) Production of Pravastatin by Filamentous Fungi Isolated from Soil. PhD thesis, Universiti Malaysia Pahang.

Emyra Ezzaty, Masiren (2013) Effect of Additive on Asymmetric Polyvinylidene Flouride Membrane for CO2/N2 Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

En, Tan Kang (2013) Interactive mathematics game using kinect. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Engku Ersyad, Engku Abas (2013) Design and fabrication of ankle-foot orthoses through 3D scanning and rapid prototyping. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Erna Wati, Hajar (2013) Identification and characterization of stevia rebaudiana extraction for total phenolic compound using soxhlet extraction and microwave-assisted extraction techniques. Masters thesis, Universiti Malaysia Pahang.

Eugene Hien Yoong, Ng (2013) Dynamic Simulation of Bulk Polymerisation of Styrene Using ODE Solver Within Matlab Software. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

F

F., Basrawi and Yamada, Takanobu and Obara, Shin’ya (2013) Theoretical Analysis of Performance of a Micro Gas Turbine Co/Trigeneration System for Residential Buildings in a Tropical Region. Energy and Buildings, 67 . pp. 108-117. ISSN 0378-7788

F., Basrawi and Hassan, Ibrahim and Mohd Yusof, Taib and Lee, Giok Chui (2013) Optimum Thickness of Wall Insulations and Their Thermal Performance for Buildings in Malaysian Climate. International Journal of Automotive and Mechanical Engineering (IJAME), 8 . pp. 1207-1217. ISSN 1985-9325(Print); 2180-1606 (Online)

Fadhli, Suhaimi (2013) UMP menang 10 pingat dalam BioMalaysia 2013. CREATE . p. 27. ISSN 1823-7487

Fadhlur Rahman, Mohd Romlay (2013) Increasing performance of rotary ultrasonic motor through stator modification. PhD thesis, Universiti Malaysia Pahang.

Fadilah, Siali and Liu, Yao and Cheng, Jack Kie (2013) Inventory Management and Logistics Cost Reduction: A Case of a Malaysia Herbal Medicine Company. Technology and Investment, 4 (3). pp. 204-212.

Fadli, Mislan@Mishadi (2013) Comparison study of corrosion measurement technique. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Fadzil, Mat Yahaya and Hanisah, Harun and Wan Mohd Nazmi, Wan Abdul Rahman (2013) Concrete Corrosion Performance using Palm Oil Fuel Ash (POFA) as a Cement Replacement Material. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-4.. (Unpublished)

Fadzilah, Abdul Latif (2013) Humic acid removal by polyester nanofiltaration (NF) membrane synthesized from triethanolamine (TEOA) monomer. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Faezah, Bakar (2013) Modelling and simulation of fermentation product purification using batch distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fairuz, Idris (2013) To study the multi-objective optimization of EDM using genetic algorithm. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Faiz, Mohd Turan (2013) A three-stage methodology for design evaluation in product development. PhD thesis, Universiti Tun Hussein Onn.

Fakhri Fadullilah, Sulaiman (2013) Fabrication of Medium Density Fibre Board From Oil Palm Frond Using Waste Low Density Polyethylene (LDPE) Composites as Possible Partial Replacement For Binder. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Fakhrurrazi, Ab Karim (2013) Experimental and finite element evaluation of bending for galvanized iron. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Falatoonitoosi, Elham and Zulkiflle, Leman and Sorooshian, Shahryar (2013) Modeling for Green Supply Chain Evaluation. Mathematical Problems in Engineering, 2013 (201208). pp. 1-9. ISSN 1024-123X (print); 1563-5147 (online)

Fansurina, Abdullah (2013) 4 penuntut UMP bakal ke Jerman. Utusan Malaysia .

Fanurul Kemp, Abd Hakim (2013) Causes of delay in Malaysian IT projects. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Faradila, Naim and Rawaida, Jaafar and Nurul Wahidah, Arshad and Rosyati, Hamid and Mohd Najib, Razali (2013) Unclean Hand Detection Machine using Vision Sensor. In: Electronics, Communications and Photonics Conference (SIECPC), 2013 Saudi International, 27-30 April 2013 , Riyadh. pp. 1-4..

Farah Amira, Mohd Ghazali (2013) The effects of recycled polypropylene mixing ratio on the tensile strength of polypropylene. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Farah Fatihah, Mohd Azhari (2013) A Simulation Study on Model Predictive Control Application for Depropanizer Using Aspen Hysys. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Farah Hafidzah, Ahmad (2013) Antioxidant Activity and Total Phenolic Content of Benincasa Hispida Fruit Extracts From Various Extraction Solvents. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Farah Hanani, Zulkifli and Jahir Hussain, Fathima Shahitha and M. M., Yusoff and Chahal, Sugandha (2013) Scaffolds from Chemically Modified Cellulose Nanofibers for Skin Tissue Engineering. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. p. 1..

Farah Hanani, Zulkifli and Jahir Hussain, Fathima Shahitha and M. M., Yusoff and Nurul Nadiah, Hamidon and Sugandha, Chahal (2013) Cross-Linking Effect on Electrospun Hydroxyethyl Cellulose/Poly(Vinyl Alcohol) Nanofibrous Scaffolds. Procedia Engineering, 53 . pp. 689-695. ISSN 1877-7058

Farah Liyana, Hassan (2013) Lead time reduction in SME by using value stream mapping (VSM) technique. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Farah Syazana, Roslan and Suliana, Ab Ghani and Muhammad Ikram, Mohd Rashid and Noor Lina, Ramli (2013) LED Traffic Light with Single Display. In: International Conference on Electrical, Control and Computer Engineering (InECCE 2013), 27-28 August 2013 , M.S Garden Hotel Kuantan, Pahang. pp. 1-4.. (Unpublished)

Farhanah, Amanulla Khan (2013) Fermentative Production of Butanol From Oil Palm Trunk (OPT) Sap Using Clostridium Acetobutylicum and Clostridium Beijerinckii. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Faridah, Mohd Nor (2013) A comparative study on the effect of clay loading under normal and auto thermal extrusion to the morphology structure and thermal stability of nylon 6 nanocomposites. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fathin, Idros (2013) Supply chain decision making in chemical industries using Analytical Hierarchy Process (AHP) a palm oil industry case study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatimah, Dzaharudin and Suslov, Sergey A. and Manasseh, Richard and Ooi, Andrew (2013) Effects of Coupling, Bubble Size, and Spatial Arrangement on Chaotic Dynamics of Microbubble Cluster in Ultrasonic Fields. The Journal of Acoustical Society of America, 134 (5). pp. 3425-3434. ISSN 0001-4966

Fatin, . (2013) 53 pelajar tingkat kemahiran berbahasa Inggeris. CREATE . p. 61. ISSN 1823-7487

Fatin Adnin, Mohamad Prim Nasir (2013) Sediment concentration and size at Galing River, Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Nadhirah, Mahazan (2013) Formulation, characterization, and optimation of emulsion fuel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Sufina, Abdul Rashid (2013) Analysis of wind effect on the canopy structure. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin ‘Atikah, Abd. Manan (2013) Exploring of the Transesterification of Castor Oil to Produce Biodiesel Using Quicklime as a Basic Catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Fatinnurhazwani, Zainal (2013) Effect of Ultrasound on Enzymatic Extraction of Zingiber Officinale. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Fatmawati, Adam (2013) Boost efforts to make our own drugs. New Straits Times, (15 Ap . p. 19.

Faturachman, Danny and Shariman, Mustafa (2013) Safety & Security Analysis of Sea Transportation in Indonesia. In: International Conference on Knowledge Management (ICKM 2013), 14 - 15 Feb 2013 , Kuala Lumpur. pp. 527-529.. (Unpublished)

Faturachman, Danny and Shariman, Mustafa and Muslim, Muswar (2013) The Utilization of Solar Cell for Power Lighting Equipment on the Ferry. In: 6th International Engineering Conference (Encon): "Energy and Environment" 2013, Hilton Kuching Hotel, Sarawak , 2-4 July 2013. . (Unpublished)

Faturachman, Danny and Shariman, Mustafa and Muswar, Muslim (2013) Indonesian’s Sea Transportation Accident Analysis. In: 2nd International Conference on Technology Management, Business and Entrepreneurship 2013, 4-5 December 2013 , Melaka. pp. 1-8.. (Unpublished)

Faturachman, Danny and Shariman, Mustafa and Octaviany, Fanny and Novita, Theresia D. (2013) Failure Mode and Effects Analysis of Diesel Engine for Ship Navigation System Improvement. In: The International Conference on Business Innovation, Entrepreneurship and Engineering 2013 (ICOBIEE 2013), 6-8 December 2013 , Penang. pp. 1-13.. (Unpublished)

Fazreeny, Adnan (2013) Car rental management sytem with SMS alert. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Feng, Shangsu and A., Zulkiple (2013) The Application of Energy Saving Technology in High Rise Building a Lanzhou. Procedia Civil Engineering . pp. 1-4.

Feng, Cheng (2013) Comparison of design experiment in carbon dioxide (co2) corrosion prediction. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ferdaus, Musa (2013) Hari Kokurikulum UMP beri penghargaan kepada pelajar. CREATE . p. 47. ISSN 1823-7487

Ferdous, Kaniz and Uddin, M. Rakib and Uddin, M. Rahim and Khan, Maksudur R. and Islam, M. A. (2013) Preparation and Optimization of Biodiesel Production from Mixed Feedstock Oil. Chemical Engineering and Science, 1 (4). pp. 62-66. ISSN 2328-7381

Fong, Kong Hing (2013) Self-cleaning solar cell module with sun tracking using microcontroller for battery charger. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Fong, Woan Shiuan (2013) Causes and effects of abuses in a feasibility study : a study in malaysian construction industry. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Foong, Lee Sai (2013) Texture recognition by using artificial neural network. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

G

G., Venkateswara Rao and Ramaraju, Ramgopal Varma (2013) Mechanical Postbuckling Behavior of Circular Plates Through Concept of Equivalent Radial Tensile Load. Journal of Structural Engineering, 40 (5). pp. 507-511.

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan and Melati, Khairuddean and Efendi, Jon (2013) A New Heterogeneous Acid Catalyst for Esterification: Optimization Using Response Surface Methodology. Energy Conversion and Management, 65 . pp. 392-396. ISSN 0196-8904

Gaanty Pragas, Maniam and Irma, Nurfitri and Noor, Hindryawati and M. M., Yusoff and Shangeetha, Ganesan (2013) Potential of Feedstock and Catalysts from Waste in Biodiesel Preparation: A Review. Energy Conversion and Management, 74 . pp. 395-402. ISSN 0196-8904

Gaanty Pragas, Maniam and Kuppusamy, Palaniselvam and M. M., Yusoff and Govindan, Natanamurugaraj (2013) A case study - Regulation and Functional Mechanisms of Cancer Cells and Control its Activity Using Plants and their Derivatives. Journal of Pharmacy Research , 6 (Issue ). pp. 884-892. ISSN 0974-6943

Gaanty Pragas, Maniam and Noor, Hindryawati and Irma, Nurfitri and Rajan, Jose and Mohd Hasbi, Ab. Rahim and Farrah Aini, Dahalan and M. M., Yusoff (2013) Decanter Cake as a Feedstock for Biodiesel Production: A First Report. Energy Conversion and Management, 76 . pp. 527-532. ISSN 0196-8904

Gan, Leong Ming (2013) Tukun tiruan bantu pelihara ekosistem hidupan. CREATE . p. 27. ISSN 1823-7487

Geoffrey, Ogadimma Asiegbu (2013) Defect detection on electrical power equipment using thermal imaging technology. Masters thesis, Universiti Malaysia Pahang.

Gharehghani, A. and Koochak, M. and Mirsalim, M. and Yusaf, Talal (2013) Experimental Investigation of Thermal Balance of a Turbocharged SI engine Operating on Natural Gas. Applied Thermal Engineering, 60 (1-2). pp. 200-207. ISSN 1359-4311

Go Bee, Chew (2013) Wastewater Treatment by Continuous Stirred Tank Reactor (CSTR). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Goh, Ming Hui (2013) Dynamics analysis of 3 axis gantry type multipurpose CNC machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Goh Mun, Chun (2013) Study on Optimum Condition of Empty Fruit Bunch-Graft-Poly (Acrylamide) Superabsorbent Polymer Composites. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Gopi, Vesuvapateran (2013) Durability of concrete containing laterite aggregate as partial coarse aggregate replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Gupta, Arun and Khan, Tanveer Ahmed and Saidatul Shima, Jamari and Rajan, Jose and Mohammed, Nasir and Anuj, Kumar (2013) Synthesis and Characterization of Carbon Fibers and their Application in Wood Composites. BioResources, 8 (3). pp. 4171-4184. ISSN 1930-2126 (print); 1930-2126 (online)

Gupta, Ritu and Norrozila, Sulaiman and Gupta, Arun (2013) An Improved Algorithm for Prediction of Young's Modulus of Wood Plastic Composites. Scientific Research and Essay , 8 (16). pp. 649-656. ISSN 1992-2248

Gwee Xian, Fu (2013) Ultrasonic Extraction of Anthocyanins From Clitoria Ternatea Flowers Using Response Surface Methodology. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

H

Hadianatun Saadiah, Jasni (2013) Design and fabrication of printer table. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Hafidz Arif, Osman (2013) Water quality index of Sungai Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hafizoah, Kassim (2013) The Relationship Between Learning Styles, Creative Thinking Performance and Multimedia Learning Materials. Procedia - Social and Behavioral Sciences, 97 . pp. 229-237. ISSN 1877-0428, ESSN: 1877-0428

Haitham Mohammed, Ali Al-Abee (2013) In situ Transesterification of Biodiesel For Possible Biodiesel Production. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Hajar Athirah, Mohd Sukri (2013) Reduction of Cd(II), Ag(II) AND Cu(II) Using Rubber Seed Shell : Adsorption Isotherm and Kinetics. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Hajar Fauzan, Ahmad (2013) Evaluation of interferon gamma release assay using mycobacterium tuberculosis antigens for diagnosis of pulmonary tuberculosis in BCG vaccinated population of Kelantan, Malaysia. Masters thesis, Universiti Malaysia Pahang.

Haliza, Abdul Rahman and Arifah, Bahar and Norhayati, Rosli (2013) Parameter Estimation of Lotka-Volterra Model: A Two-Step Model. Jurnal Teknologi (Sciences and Engineering), 63 (2). pp. 21-25. ISSN 0127-9696 (print); 2180-3722 (online)

Hamada, Khalaf I. and M. M., Rahman and A. Rashid, A. Aziz (2013) Parametric Study Of Instantaneous Heat Transfer Based on Multidimensional Model in Direct-Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (28). pp. 12465-12480. ISSN 0360-3199

Hamada, Khalaf I. and M. M., Rahman and M. A., Abdullah and R. A., Bakar and A. Rashid, A. Aziz (2013) Effect of Mixture Strength and Injection Timing on Combustion Characteristics of a Direct Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (9). pp. 3793-3801. ISSN 0360-3199

Hamdi Abdullah, Mohammed Mudhsh (2013) Design and analysis of piping system for an open channel flume’s flow. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Hamidah, Jusoh (2013) Simulation of the ceramic ball formation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hamizatun, Mohd Fazi (2013) Correlation study of the strain and vibration signals of a beam. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hamzah, Ahmad and Saifudin, Razali and Mohd Rusllim, Mohamed (2013) Fuzzy Logic Controller Design for A Robot Grasping System with Different Membership Functions. In: 5th International Conference on Mechatronics (ICOM 2013), 2-4 July 2013 , Berjaya Times Square Hotel, Kuala Lumpur, Malaysia. pp. 1-8.. (Submitted)

Hanifan, Abd Jalil (2013) Catalytic water oxidation of wastewater containing acetic acid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hanisah, Harun (2013) Corrosion performance of concrete using palm oil fuel ash (POFA) as a cement replacement material. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hanna, Mustafa (2013) Thermal simulation of laser surface processing for hot forming die surface hardening. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Haryani, Abdullah (2013) Naib Canselor rasmi Kejohanan Sukan MWGi di kalangan pelajar Malaysia. CREATE . p. 62. ISSN 1823-7487

Haryani, Abdullah and Mohamad Rozi, Hassan (2013) Inovasi Perkhidmatan Melalui Pendekatan Strategik Antara “Orientasi Keusahawanan” & Pembangunan HR-IMS UMP. In: Persidangan Kebangsaan Pentadbiran Sumber Manusia IPTA (PESUMA 2013) , 4-6 Jun 2013 , Kuala Terengganu, Malaysia. pp. 1-17..

Haryani, Abdullah and Mohamad Rozi, Hassan and Sabarehan, Ismail (2013) Amalan Pengurusan Kejat (Lean Management) Melalui Teknologi Maklumat : Pengalaman Aplikasi “Human Resource-Integrated Management System (HR-IMS)” UMP. In: Seminar Inovasi Sektor Awam Peringkat Kebangsaan 2013, 18-19 November 2013 , Pulau Pinang, Malaysia. pp. 1-12..

Hasan, Zainal Abidin (2013) Vibration suppression of flexible beam using eddy current damper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasany, Syed Farhan and Nour, A. H. and Kumar, Anuj and Sunarti, Abd Rahman (2013) Facile Fabrication of y-Fe2O3 Embedded Nanocomposite of Multiwalled Carbon Nanotubes (MWCNTs). In: 3rd Nano Today Conference, 8-11 December 2013 , Singapore. p. 1.. (Unpublished)

Hasnah, Hussiin (2013) Elemen tarik pengundi pilih pemimpin. Berita Harian, (4 Apr . p. 26.

Hasnah, Hussiin (2013) Eratkan perpaduan. Berita Harian, (23 Ma . V15.

Hasnah, Hussiin (2013) Memahami hikmah disebalik penjajahan kuasa asing. Berita Harian, (15 Ju . p. 38.

Hasnah, Hussiin (2013) Menyingkap gaya hidup orang dulu-dulu. CREATE . pp. 70-71. ISSN 1823-7487

Hasnah, Hussiin (2013) Pelbagai elemen jadikan negara model keharmonian bangsa. Berita Harian, (27 Ju . p. 39.

Hasnah, Hussiin (2013) Pembangunan luar bandar diteruskan. Berita Harian, (18 Ja . p. 32.

Hasnah, Hussiin (2013) Penjawat awam jadikan SKT wadah nilai prestasi diri. Berita Harian, (15 Ju . p. 29.

Hasnah, Hussiin (2013) Peristiwa di sebalik penubuhan Malaysia wajar dihayati. Berita Harian, (19 Se . p. 29.

Hasnah, Hussiin (2013) Persediaan mahasiswa ke peringkat global. Berita Harian, (17 Ja . p. 24.

Hasnah, Hussiin (2013) Siswa berdaya saing elak pengangguran. Berita Harian, (23 Oc . p. 27.

Hasnah, Hussiin (2013) Subjek hubungan etnik eratkan perpaduan kaum. CREATE . p. 62. ISSN 1823-7487

Hasnah, Hussiin (2013) Tangan asing kian mencengkam kemerdekaan kita. Berita Harian, (28 Au . p. 24.

Hasnah, Hussiin (2013) Ubat herba melalui kaedah bioteknologi. Berita Harian, (4 Apr . p. 29.

Hasudungan, Rofilde and Rohani, Abu Bakar (2013) DNA Computing Technique to Solve Vertex Coloring Problem. In: 2013 International Conference on Advanced Computer Science Applications and Technologies (ACSAT), 23-24 Dec. 2013 , Kuching. pp. 341-345..

Hasudungan, Rofilde and Rohani, Abu Bakar (2013) DNA Computing for Solving Distribution Center Location Problem. In: Proceedings of the IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2013), 29 November - 1 December 2013 , Mindeb, Penang, Malaysia. pp. 563-567..

Hasudungan, Rofilde and Rohani, Abu Bakar and Rozlina, Mohamed (2013) DNA Computing and Its Application on NP Completeness Problem. In: The 3rd International Conference on Software Engineering & Computer Systems (ICSECS 2013), 20-22 August 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-9., 4 (3).

Hazlina, Faizal (2013) Cost reduction workshops. Quest, 9 (5). p. 12. ISSN 1985-8159

Hazlina, Faizal (2013) The new Deputy Vice Chancellor (Research and Innovation). Quest, 10 (6). p. 1. ISSN 1985-8159

Hazwan Arif, Mazlan (2013) Dynamic simulation tools for main metabolic pathway of escherichia coli. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Hegde, Gurumurthy and Alla, Rasha Ata and Komito, Lachezar and Morelli, Andrea and Chiellini, Emo and Galli, Giancarlo (2013) Composite Materials Containing Perfluorinated and Siloxane Units for Vertical Alignment of Liquid Crystals. Soft Nanoscience Letters, 3 (1). pp. 11-13. ISSN 2160-0600 (print); 2160-0740 (online)

Hegde, Gurumurthy and Ata Alla, Rasha and Matharuc, Avtar and Komitov, Lachezar (2013) Azo Containing Thiophene Based Prop-2-enoates for Photoalignment of a Nematic Liquid Crystal. Journal of Materials Chemistry C, 1 . pp. 3600-3605. ISSN 2050-7526

Hegde, Gurumurthy and Elamain, Omaima and Fodor-Csorba, Katalin and Komitov, Lachezar (2013) Optically Isotropic State in Bent Core Nematic Mixtures with Rod Like Molecules Induced by Direct Current Electric Field. Applied Physics Letters, 103 (16). pp. 163501-1. ISSN 0003-6951 (print); 1077-3118 (online)

Hegde, Gurumurthy and Elamain, Omaima and Fodor-Csorba, Katalin and Komitov, Lachezar (2013) Field-induced Optically Isotropic State in Bent Core Nematic Liquid Crystals: Unambiguous Proof of Field-induced Optical Biaxiality. Journal of Physics D: Applied Physics, 46 (45). pp. 1-7. ISSN 1361-6463 (print); 0022-3727 (online)

Hegde, Gurumurthy and Elamain, Omaima and Komitov, Lachezar (2013) Alignment and Alignment Transition of Bent Core Nematics. Applied Physics Letters, 103 (2). 023301-1. ISSN 0003-6951 (print); 1077-3118 (online)

Hegde, Gurumurthy and Namdar, Abdoullah and Ideris, Zakaria (2013) Application of Recycle Material in Construction Industry a Method of Sustainable Development. International Journal of Materials Science and Engineering, 1 (1). pp. 41-44. ISSN 2315-4462

Hegde, Gurumurthy and Sarojini, B. K. and Manjula, P. S. and Kour, Dalbir and Anthal, Sumati and Gupta, Vivek K. and Kant, Rajni (2013) 4-Amino-3-(3-methoxybenzyl)-1H-1,2,4-triazole-5(4H)-thione. Acta Crystallographica Section E: Structure Reports Online, 69 (5). pp. 1-7. ISSN 1600-5368

Hegde, Gurumurthy and Sarojini, B. K. and Manjula, P. S. and Kour, Dalbir and Gupta, Vivek K. and Kant, Rajni (2013) 3-Methyl-4-{(E)-[4-(methylsulfanyl)-benzylidene]amino}-1H-1, 2,4-triazole-5(4H)-thione. Acta Crystallographica Section E: Structure Reports Online, 69 (5). pp. 718-719. ISSN 1600-5368

Hegde, Gurumurthy and Ata Alla, Rasha and Komitov, Lachezar (2013) Light-control of Liquid Crystal Alignment from Vertical to Planar. Applied Physics Letters, 102 (23). pp. 233505-1. ISSN 0003-6951 (print); 1077-3118 (online)

Hegde, Gurumurthy and M. M., Yusoff and Chigrinov, V. G. (2013) Novel Concept of Aligning the Molecules for Electronic Paper Displays. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Helmi, Mohamed Isa (2013) Working visit to universities and industries in Saudi Arabia. Quest, 9 (5). p. 2. ISSN 1985-8159

Herawan, Tutut and Wan Maseri, Wan Mohd (2013) RMF: Rough Set Membership Function-based for Clustering Web Transactions. International Journal of Multimedia and Ubiquitous Engineering (IJMUE), 8 (6). pp. 105-118. ISSN 1975-0080

Hiew, Hon Hoi (2013) A study of the effectiveness of recruitment in selecting qualified talents in service organization. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Hilmi Rasyad, Mohd Hassan (2013) The impact of technology application in the improvement of service delivery: a case study at the Road Transport Department Malaysia law enforcement division of Pulau Pinang. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Himala, Dewi Jaganathan (2013) Estimation system using function point. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ho, Kah Sing and Chye, Joanna Jo Ean and Chin, S. Y. and Cheng, C. K. (2013) Characterization of Industrial Pt-Sn/Al2O3 Catalyst and Transient Product Formations during Propane Dehydrogenation. Bulletin of Chemical Reaction Engineering & Catalysis, 8 (1). pp. 77-82. ISSN 1978-2993

Ho, Siang Ven (2013) Design and implementation of an autonomous multistoried car parking system with human machine interface (HMI) controlled by programmable logic controller (PLG). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Hojabri, Mojgan and Ali Mahmood, Humada and Mortaza, Mohamed and Mushtaq, N. Ahmed and M. H., Sulaiman and Mudathir Funsho, Akorede (2013) Reconfiguration Method Based on DC/DC Central Converter within Different Mismatch Conditions. International Journal of Engineering Sciences & Research Technology, 2 (12). pp. 3634-3639. ISSN 2277-9655

Hojabri, Mojgan and Toudeshki, A. and Mariun, Norman and Nizam, H. and N. I., Abdul Wahab and Y., Ali Sai'd and Saadatian, O. and M., Mansoor and Saadatian, E. (2013) Derivation of Load Peak Voltage, Power Consumption and Potential Energy Management in a Thyristor Controlled Marx Impulse Generator for Capacitor Discharge Application. Majlesi Journal of Energy Management, 2 (2). pp. 1-5. ISSN 2322-3073

Hojabri, Mojgan and Toudeshki, Arash (2013) Power Quality Consideration for Off-Grid Renewable Energy Systems. Energy and Power Engineering, 5 (5). pp. 377-383. ISSN 1949-243X (print); 1947-3818 (online)

Hong, Fam Sheng (2013) House monitoring system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hong, Peck Hui (2013) Tutoring system for fraction using siemer’s & angelides its architecture. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hoong, Chan Chung (2013) Wi-Fi Remote Control Car Via Mobile Device. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hossain, Mohamed Amjed and Mir, Sujaul Islam and Nasly, Mohamed Ali (2013) Surface Water Quality Assessment of Tunggak River Gebeng, Pahang, Malaysia. In: 4th International Conference on Water and Flood Management (ICWFM-2013), 9-11 Mac 2013 , Dhaka, Bangladesh. pp. 47-53.. (Unpublished)

Hossain, Mohamed Amjed and Nasly, Mohamed Ali and Mir, Sujaul Islam (2013) Automated QUAL2Kw for Water Quality Modeling in the Tunggak River, Gebeng, Kuantan, Malaysia. In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-6..

Hou Lee, Sii (2013) Mechanical properties of concrete containing crushed cockle shell as coarse aggregate replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

How, Liew Futt (2013) Production of biodiesel from palm oil through heterogeneous catalysis using calcined eggshell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

How, Teoh Wei (2013) Recovery of dilute acetic acid via esterification reaction catalyzed by Amberlyst 15. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hua, Chyn Lee and Jolius, Gimbun and Suzana, Yusup and Cheng, C. K. (2013) Bio-syngas Production from Glycerol Dry Reforming over Cement Clinker-supported Nickel Catalyst. In: 2nd Postgraduate Colloquium for Environmental Research 2013 (POCER 2013) , 28-29 June 2013 , Awana Hotels and Resorts, Genting Highlands, Pahang. pp. 1-2.. (Unpublished)

Hua, Chyn Lee and Kah, Weng Siew and Jolius, Gimbun and Cheng, C. K. (2013) Application of Cement Clinker as Ni-Catalyst Support for Glycerol Dry Reforming. Bulletin of Chemical Reaction Engineering & Catalysis, 8 (2). pp. 137-144. ISSN 1978-2993

Hui, Zhang (2013) Operational analysis of motorized and non-motorized vehicle flow at intersection of Changying anf Wanshow roads. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

I

Ida Rizyani, Tahir and Mazita, Mokhtar and Noor Azlinna, Azizan and Shariman, Mustafa (2013) Market Orientation Of Male And Female Entrepreneurs: A Preliminary Study In Malaysia Halal Food Industry. In: International Conference on Management and Business Science (AICMBS 2013), 5-6 September 2013 , Batu, Indonesia. . (Unpublished)

Ida Rizyani, Tahir and Mohani, Abdul (2013) The Role of Religious Orientation in the Business Performance of Women Owned Firms: A Preliminary Study in Malaysia Halal Food Industry. The Macrotheme Review , 2 (Issue ). pp. 40-45. ISSN 1848-4735

Ikhwan Hafiz, Muhamad and Fairuz Rizal, Mohamad Rashidi (2013) In-Car Suffocating Prevention Using Image Motion Detection. In: 2nd International Conference on Systems, Control, Power, Robotics (SCOPORO '13), 23-25 April 2013 , Morioka City, Iwate, Japan. pp. 145-150..

Ikhwan Hafiz, Muhamad and Fairuz Rizal, Mohamad Rashidi (2013) Vehicle's Interior Movement Detection and Notification System. In: 2nd International Conference on Systems, Control, Power, Robotics (SCOPORO '13), 23-25 April 2013 , Morioka City, Iwate, Japan. pp. 139-144..

Ilmanfaiq, Hamzah (2013) Effect of mig and tig welding on hybrid structure using modal analysis. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Iman Khalid, A. Qader and Yuserrie, Zainuddin (2013) The Impact of Safety and Health Concerns on Environmental Attitudes towards Green Electronic Products among Lecturers. International Journal of Management Sciences, 1 (6). pp. 217-227.

Imran, Anwar and Abdul Rahman, Mohd Kasim and Zulkhibri, Ismail and Mohd Zuki, Salleh and Sharidan, Shafie (2013) Chemical Reaction and Uniform Heat Generation or Absorption Effects on MHD Stagnation-Point Flow of a Nanofluid over a Porous Sheet. World Applied Sciences Journal, 24 (10). pp. 1390-1398. ISSN 1818-4952

Imran Edzereiq, Kamarudin and Syahrizal Azmir, Md Sharif and Tutut, Herawan (2013) On Analysis and Effectiveness of Signature Based in Detecting Metamorphic Virus. International Journal of Security and Its Applications, 7 (4). pp. 375-385.

Imran Edzereiq, Kamarudin and Syahrizal Azmir, Md Sharif and Tutut, Herawan (2013) Performance Analysis on the Effect of G.729, Speex and GSM Speech Codec on 802.11g Wireless Local Area Network over VoIP using Packet Jitter. International Journal of Control and Automation, 6 (4). pp. 387-396. ISSN 2005-4297

Indran, Vidhyaa Paroo and Mohd Hasbi, Ab. Rahim and Gaanty Pragas, Maniam and M. M., Yusoff and Taufiq, Yap Yun Hin (2013) Boiler Ash-Catalysed Synthesis of Glycerol Carbonate from Glycerol. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Intan NurMarzliny, Mohd Akmallah (2013) Early stage writing application for beginners with precision evaluation (alphabet module). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Iqmil, Hamdan (2013) Utilization of Eggshell Waste as Solid Catalyst for Biodiesel Production from Jatropha Curcas Oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Irawan, Addie and Ai, Chern Lim (2013) Polystyrene Foam-Based Leg Tip Strider Robot. In: Proceeding of 2nd International Conference on Electrical, Control and Computer Engineering (inECCE 2013), 27 -28 August 2013 , MS Garden Hotel, Kuantan. pp. 143-146..

Irawan, Addie and Nonami, Kenzo and Mohd Razali, Daud (2013) Optimal Impedance Control with TSK-type FLC for Hard Shaking Reduction on Hydraulically Driven Hexapod Robot. In: Autonomous Control Systems and Vehicles. Intelligent Systems, Control and Automation: Science and Engineering, 65 . Springer, Japan, pp. 223-236. ISBN 978-4-431-54275-9 (print); 978-4-431-54276-6 (online)

Irawan, Addie and Tan, Yee Yin and Mohd Syakirin, Ramli and Mohd Riduwan, Ghazali and Nonami, Kenzo (2013) Hexa-Quad Transformation Control for Hexapod Robot Based on Support Polygon Pattern. In: The 8th international Sysmposium on Artificial Life and Robotics (AROB 2013), 30 January - 1 February 2013 , Daejeon Convention Center (DCC), Daejeon, Korea. pp. 529-534..

Irwan, Misalam (2013) Flow straightening analysis in an open channels flume. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ismail, Khairuddin (2013) Pelajar FKP menang pertandingan reka bentuk inovasi Malaysia. CREATE . p. 28. ISSN 1823-7487

Ismail Ammar, Mohamat (2013) The study characteristics of electrospinning nanofibers in polyetyhlene oxide(PEO)for controlled released and target delivery. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ismayuzri, Ishak (2013) Development of an image rotary encoder for motion control. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Iza Nor Afinie, Mohd Samuri (2013) Ergonomic study on eye discomfort for using ump website homepage by applying Jakob Nielsen’s heuristics. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Izirwan, Izhab and Mohd, Asmadi and Nor Aishah, Saidina Amin (2013) Characterization of Oil Palm Shell Activated Carbon and ZSM-5 Supported Cobalt Catalysts. In: 6th International Congress of Chemistry and Environment 2013, 8-10 July 2013 , Antwerp, Belgium. pp. 1-8.. (Unpublished)

Izzat Zikri, Musa (2013) Design and fabricate tandem bicycle front part. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

J

Jaber, Aws Naser and Mohamad Fadli, Zolkipli (2013) Use of Cryptography in Cloud Computing. In: IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2013), 29 Nov - 1 Dis 2013 , Mindeb, Malaysia. pp. 179-184.. ISBN 978-1-4799-1508-8

Jagatis, Balaiyah (2013) Effect of chronic obstructive pulmonary disease on airflow motion using computational fluid dynamics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jamiah, Manap and Arena, Che Kassim and Suzana, Hoesni and Salina, Nen and Fazilah, Idris and Siti Fatihah, Ghazali (2013) The Purpose of Marriage among Single Malaysian Youth. Procedia - Social and Behavioral Sciences, 82 . pp. 112-116. ISSN 1877-0428, ESSN: 1877-0428

Jasni, Mohamad Zain and Qin, Hongwu and Ma, Xiuqin and Herawan, Tutut (2013) An Improved Genetic Clustering Algorithm for Categorical Data. In: Emerging Trends in Knowledge Discovery and Data Mining: PAKDD 2012 International Workshops: DMHM, GeoDoc, 3Clust, and DSDM, Kuala Lumpur, Malaysia, May 29 – June 1, 2012, Revised Selected Papers. Lecture Notes in Computer Science, 7769 (Lectur). Springer, Berlin Heidelberg, pp. 100-111. ISBN 978-3-642-36778-6

Jasni, Mohamad Zain and Sutarman, na and Mazlina, Abdul Majid (2013) A Review on the Development of Indonesian Sign Language Recognition System. Journal of Computer Science, 9 (11). pp. 1496-1505. ISSN 1549-3636

Jasri, Mohamad (2013) Springback prediction in sheet metal forming: constitutive equations, finite element simulations and experimental validation. PhD thesis, University of Strathclyde.

Jasveena, R.Prabhagaran (2013) Study on Delignification of Fiber on the Temperature and Naoh Added Concentration by Ultrasound Assistance. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Jaya Vejayan, Palliah and Sarsaifi, Kazhal and Omar, Mohamed-Ariff and Rosnina, H. Yusoff and Abd-Wahid, Haron and Hani, Homayoun and Yimer, Nurhusein and Naing, Soe W. and Abas Mazni, Othman (2013) Development of Superovulation Program and Heterologous in vitro Fertilization Test Assessment in Hamsters. Asian Journal of Animal and Veterinary Advances, 8 (6). pp. 796-805. ISSN 1683-9919 (print); 1996-3289 (online)

Jee, Keh Lih (2013) A study of causes and effects of project change in construction industry. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Jessinta, Sandanasamy and Azhari, H. Nour and Saiful Nizam, Tajuddin and Nour, A. H. (2013) Fatty Acid Composition and Antibacterial Activity of Neem (Azadirachta indica) Seed Oil. The Open Conference Proceedings Journal, 4 . pp. 42-48. ISSN 2210-2892

Jia, Wei Low and Nafarizal, Nayan and Mohd Zainizan, Sahdan and Mohd Khairul, Ahmad and Ali Yeon, Md Shakaff and Ammar, Zakaria and Ahmad Faizal, Mohd Zain (2013) Morphology, Topography and Thickness of Copper Oxide Thin Films Deposited using Magnetron Sputtering Technique. In: Micro and Nanoelectronics (RSM), 2013 IEEE Regional Symposium , Langkawi, The Jewel of Kedah. pp. 352-355..

Jia Xin, Jong (2013) Study on water quality at Tasik Chini, Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Jie, Liew Kok (2013) Scale up study of salt added batch distillation of azeotropic mixture : isopropanol/water. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jie, Ma and Rui, Xiao and Kamarul Hawari, Ghazali (2013) Driver's Face Tracking Based On Improved CAMShift for Drowsiness Detection. Applied Mathematics & Information Sciences Letters An International Journal, 1 (1). pp. 19-27. ISSN 2325-0399

Joanne, Tey Choo Hong (2013) Ferulic acid production from banana stem waste: kinetic study. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jolius, Gimbun (2013) Pelajar FKKSA menang pertandingan IEM Plant Design. CREATE . p. 32. ISSN 1823-7487

Jolius, Gimbun (2013) Research paper competition. Quest, 9 (5). p. 13. ISSN 1985-8159

Jolius, Gimbun and Ali, Shahid and Kanwal, Chitra Charan Suri Charan and Liyana, Amer Shah and Nurul Hidayah, Muhamad Ghazali and Cheng, C. K. and Said, N. (2013) Biodiesel Production from Rubber Seed Oil Using Activated Cement Clinker as Catalyst. Procedia Engineering, 53 . pp. 13-19. ISSN 1877-7058

Jou, Wendy Kong Yin (2013) Removal of manganese from synthetic wastewater by adsorption. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Juliawati, A. and Nur Azhani, Abd Razak (2013) Hydrogen Embrittlement Susceptibility of Pipeline Steel. Applied Mechanics and Materials, 315 . pp. 820-824. ISSN 1662-7482

K

K., Kadirgama and Adnan, M. Husein and Sharma, Korada Viswanatha and R. A., Bakar (2013) The Effect of Cross Sectional Area of Tube on Friction Factor and Heat Transfer Nanofluid Turbulent Flow. International Communications in Heat and Mass Transfer, 47 . pp. 49-55. ISSN 0735-1933

K., Kadirgama and Hussein, Adnan M. and R. A., Bakar and Sharma, Korada Viswanatha (2013) The Effect of Nanofluid Volume Concentration on Heat Transfer and Friction Factor inside a Horizontal Tube. Journal of Nanomaterials, 2013 . pp. 1-12. ISSN 1687-4110 (print); 1687-4129 (online)

K., Kadirgama and Zahari, Taha and Abdul Rahim, Ismail and Azrul, Hisham and A., Zulkifli and Nasrul Hadi, Johari and Zulfika, Anuar (2013) Effect Of Knee Pad On Kicking A Ball And Gait Analysis. Movement, Health & Exercise, 2 . pp. 41-46.

K., Ramesh and R., Ramesh and T. R., Kubendran (2013) Application of McAllister Model to Measure and Predict Thermo Physical Properties of Binary Liquid Mixture at Various Temperatures. In: International Conference on Chemical and Biological Engineering (ICCBE 2013), 14-15 November 2013 , Venice, Italy. pp. 670-674..

Kah, Weng Siew and Hua, Chyn Lee and Jolius, Gimbun and Cheng, C. K. (2013) Hydrogen Production via Glycerol Dry Reforming Over La-NiAl2O3 Catalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 8 (2). pp. 160-166. ISSN 1978-2993

Kamal Z., Zamli and Al-Sewari, Abdul Rahman Ahmed Mohammed and Mohd Hafiz, Mohd Hassin (2013) MC/DC Implications for Software Testing from (Combinational) Logic Design. In: The 3rd International Conference on Software Engineering & Computer Systems (ICSECS 2013), 20-22 August 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-8., 37. ISSN 0268005X (Unpublished)

Kamal Z., Zamli and Al-Sewari, Abdul Rahman Ahmed Mohammed and Mohd Hafiz, Mohd Hassin (2013) On Test Case Generation Satisfying the MC/DC Criterion. International Journal of Advances in Soft Computing and Its Application (Int. J. Advance Soft Compu. Appl.), 5 (3). pp. 104-115. ISSN 2074-852

Kamal Z., Zamli and Al-Sewari, Abdul Rahman Ahmed Mohammed and Norazlina, Khamis (2013) Greedy Interaction Elements Coverage Analysis for AI-Based T-Way Strategies. Malaysian Journal of Computer Science, 26 (1). pp. 23-33. ISSN 0127-9084

Kamal Z., Zamli and H. C. Soh, Zainal and Syahrul A. C., Abdullah (2013) A Distributed T-Way Test Suite Generation Using “One-Parameter-at-a-Time” Approach. International Journal of Advances in Soft Computing and Its Application (Int. J. Advance Soft Compu. Appl.), 5 (3). pp. 91-103. ISSN 2074-852

Kamal Z., Zamli and Mazlina, Abdul Majid and Azlina, Zainuddin (2013) Constraints T-Way Testing Strategy With Modified Condition /Decision Coverage (MC/DC). In: Malaysian Technical Universities Conference Technology on Engineering and Technology (MUCET), 3-4 December 2013 , MS Garden Hotel, Kuantan. p. 1..

Kamal Z., Zamli and Mohd Hazli, Mohammed Zabil (2013) Adopting Bees Algorithm for Sequenced Based T-Way Test Data Generation. ICIC Express Letters , 7 (3). pp. 929-933. ISSN 1881-803X

Kamal Z., Zamli and Rozmie R., Othman and Sharifah Mashita, Syed Mohamad (2013) T-Way Testing Strategies: A Critical Survey and Analysis. International Journal of Digital Content Technology and Its Applications (JDCTA), 7 (9). pp. 222-235. ISSN 1975-9339

Kamariah, Gono (2013) Perpustakaan martabatkan Seni Tenun Pahang. CREATE . p. 61. ISSN 1823-7487

Kamarul Hawari, Ghazali and Hadi, R. S. and Zeehaida, Mohamed (2013) Microscopy Image Processing Analaysis for Automatic Detection of Human Intestinal Parasites ALO and TTO. In: Electronics, Computer and Computation (ICECCO), 7-9 November 2013 , Ankara. pp. 40-43..

Kamarul Hawari, Ghazali and Ma, Jie and Xiao, Rui (2013) Driver's Face Tracking based on Improved CAMShift. International Journal of Image, Graphics and Signal Processing (IJIGSP), 5 (1). pp. 1-7. ISSN 2074-9074 (print); 2074-9082 (online)

Kamilia Hani, Mohd Bashri (2013) Study on a maximum paper fibre recovery network design. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kamini, Citalingam and Zareen, Seema and Khozirah, Shaari and Syahida, Ahmad (2013) Effects of Payena dasyphylla (Miq.) on Hyaluronidase Enzyme Activity and Metalloproteinases Protein Expressions in Interleukin-1β Stimulated Human Chondrocytes Cells. BMC Complementary and Alternative Medicine, 13 (213). pp. 1-12. ISSN 1472-6882

Kanagesswary, Shanmuganathan (2013) Online Personal Tutoring System. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Kangeswary, Kuppusamy (2013) Automating the UMP open registration (or) system for course timetabling problem. Faculty Of Computer System And Software Engineering, Universiti Malaysia Pahang.

Karen, Yap Chia Ern (2013) A study of defects reduction in injection process of production line. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Karim, Md. Rezaul and Noor, Hindryawatia and Gaanty Pragas, Maniam and K. F., Chong (2013) Cooking Oil Waste Transesterification Over Alkali Metal (Li, Na, K) Impregnated with Rice Husk Silica: a Potential Heterogonous Base Catalysis. In: 4th Regional AFOB Symposium 2013, 17-19 Januari 2013 , Chiangmai Grandview Hotel and Convention Center, Thailand. . (Unpublished)

Karisma Dritanti, Maulidah Putri (2013) Finitte element analysis of knee pad. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Kathrina Nirmala, Manoharan (2013) Radiation grafting of fuctional polymers. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Keong, Lau Weng (2013) Catalystic wet oxidation of wastewater containing acrylic acid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kew Hong, Soo (2013) A study on waste generation in commercial area at Indera Mahkota 5, Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Khairin, Syam (2013) A model working hovercraft. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Khairina, Yasin (2013) Agih BB1M Februari ini. Berita Harian .

Khairina, Yasin (2013) Yo! pelajar UMP terbaik keseluruhan. Berita Harian .

Khairool Azizul, Mohammad (2013) Strength agent application in mechanical pulps for packaging application. Masters thesis, Monash University.

Khairul Anuar, Shahid and Mohd Arif, Sulaiman and Norhaiza, Ghazali and Wafty, Abdul Rahman and Azhani, Zukri (2013) Palm Oil Clinker as Drainage Layer in Green Roof System under Malaysia Climatic Conditions. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2.. (Unpublished)

Khairul Anuar, Shahid and Mohd Faizal, Md Jaafar and Norhaiza, Ghazali and Fadzil, Mat Yahaya (2013) Self-Healing Behaviour of Pre-Cracked POFA-Concretes Under Curing Conditions. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Khairul Anwar, Zainal Abidin (2013) Design and development of android application for fluid properties ebook and calculator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Azirul, Muhamad Asrai (2013) Destabilization of crude oil emulsions via microwave assisted ultrasonic technology. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairunisa, Muthusamy and N. A., Zulkepli and Fadzil, Mat Yahaya (2013) Exploratory Study of Oil Palm Shell as Partial Sand Replacement in Concrete. Research Journal of Applied Sciences, Engineering and Technology, 5 (7). pp. 2372-2375. ISSN 2040-7459

Khairunisa, Mohd Kadir (2013) Design reed controller for MIDI auto-saxophone. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Khaleaf, Hussain K. and Kamarul Hawari, Ghazali and Ajisman, Apen (2013) A Novel Image Edges Detection by Using Gaussian Functions. International Journal of Technology Management, 2 . pp. 1-7. ISSN 2289-2753

Khaled Salem, Aljfairi (2013) Ultrasonic membrane anaerobic system for wastewater treatment. Masters thesis, Universiti Malaysia Pahang.

Khalid, Edris and Mohammed Adam, Ibrahim Fakharaldien and Jasni, Mohamad Zain and Tuty Asmawaty, Abdul Kadir (2013) XML Digital Watermarking. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS - 2013), 20-22 August 2013 , Universiti Malaysia Pahang. pp. 1-10.. (Unpublished)

Khalifaturrahim, Ab Rahman (2013) Experimental study of alternative fuel performance operating in single cylinder diesel engine. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Khan, Maksudur R. and E., Baranitharan and D. M. R., Prasad (2013) Treatment of Palm Oil Mill Effluent in Microbial Fuel Cell Using Polyacrylonitrile Carbon Felt as Electrode. Journal of Medical and Bioengineering, 2 (4). pp. 252-256. ISSN 2301-3796

Khan, Maksudur R. and Ferdous, Kaniz and Deb, Anjan and Ferdous, Jannatul and Uddin, M. Rakib and Islam, M. A. (2013) Aphanamixis Polystachya: A Potential Non-Edible Source of Biodiesel in Bangladesh. Journal of Chemical Engineering, 28 (1). pp. 45-49. ISSN 2221-7436

Khan, Maksudur R. and Ferdous, Kaniz and Deb, Anjan and Ferdous, Jannatul and Uddin, M. Rakib and Islam, M. A. (2013) Preparation of Biodiesel from Higher FFA Containing Castor Oil. International Journal of Scientific & Engineering Research, 4 (12). pp. 401-406. ISSN 2229-5518

Khan, Maksudur R. and Ferdous, Kaniz and Uddin, M. Rakib and Islam, M. A. (2013) Preparation of Biodiesel from Soybean Oil by using Heterogeneous Catalyst. International Journal of Energy and Environment (IJEE), 4 (2). pp. 243-252. ISSN 2076-2895 (Print); 2076-2909 (Online)

Khan, Maksudur R. and Reddy Prasad, D. M. and Hamidah, Abdullah and Mohidin Batcha, Abeed Fatima (2013) Kinetic Analysis on Cell Growth and Biosynthesis of Poly (3-Hydroxybutyrate) (PHB) in Cupriavidus Necator H16. International Journal of Bioscience, Biochemistry and Bioinformatics, 3 (5). pp. 516-519. ISSN 2010-3638

Khan, Maksudur R. and Saha, Pradip and Sony, Shamima Yesmin and Mazumder, Sraboni and Deb, Tanmoy Kanti and Islam, Akhtarul (2013) Kinematic Study of Reducing Sugar Production From Rice Straw by Raw Woodrotting Enzyme Strain. Journal of Chemical Engineering, 28 (1). pp. 32-35. ISSN 2221-7436

Khan, Maksudur R. and Salam, M. A. and Pondith, Paritush Chandra and Islam, Ariful and Uddin, Mohammad Rakib and M. A., Islam (2013) Conversion of Cellulosic Waste into Fermentable Sugar: Process Optimization. Journal of Chemical Engineering, 28 (1). pp. 27-31. ISSN 2221-7436

Khan, Md. Ashikur Rahman and M. M., Rahman (2013) Development of Regression Equation for Surface Finish and Analysis of Surface Integrity in EDM. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 7 (3). pp. 178-183.

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2013) Artificial Intelligent Approach for Machining Titanium Alloy in a Nonconventional Process. International Journal of Mathematical, Computational, Physical and Quantum Engineering, 7 (11). pp. 1122-1127.

Khan, Muhammad and Azhari, H. Nour and Nour, A. H. and Elhussein, Salah A. A. (2013) Non-edible Part of Capsicum annuum-novel Source of Acetylcholinesterase Inhibition: Molecular Docking and in Vitro Enzymatic Studies. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Khan, Musaddiq Majid and Khan, Israr Ahamd (2013) The Thirst for Religion in the Modern World and Islamic View point amongst the World Religions = Hajatu al-Insan Ila al-din. Al- Adwa, 28 (39). pp. 317-340. ISSN 19957904

Khim, Tan Weng (2013) Dynamic modelling of crude distillation unit. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khleaf, Hussain Kareem and Kamarul Hawari, Ghazali and A. N., Abdalla (2013) Features Extraction Technique for ECG Recording Paper. In: Proceedings of International Conference on Artificial Intelligence in Computer Science and ICT (AICS 2013), 25 - 26 November 2013 , Bayview Hotel, Langkawi, Malaysia. pp. 1-6..

Kian, Sheng Lim and Zuwairie, Ibrahim and Salinda, Buyamin and Anita, Ahmad and Faradila, Naim and Kamarul Hawari, Ghazali and Norrima, Mokhtar (2013) Improving Vector Evaluated Particle Swarm Optimisation by Incorporating Nondominated Solutions. The Scientific World Journal, 2013 . pp. 1-19. ISSN 2356-6140 (print); 1537-744X (online)

Kim Sung, Chong (2013) Prediction of burst pressure on steel pipes using Gurson-Tvergaard-Needleman (GTN) model. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kit, Thium Keng (2013) UMP virtual directory in augmented reality. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Kong, Deyi (2013) CFD simulation of particle mixing in a fluidized bed. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kong, Pu Wei (2013) Evaluation of tensile properties of natural sand particle reinforced polymer composite. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Koochak, Mostafa and Gharehghani, Ayatallah and Shahbakhti, Mahdi (2013) Experimental and Simulation Study of In-Cylinder Strategies For Regeneration of Lean Nitrogen Oxide Traps In A High-Speed Direct-Injection Diesel Engine. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 227 (12 ). pp. 1661-1673. ISSN 2041-2991

Kozaki, Daisuke and Mori, Masanobu and Nakatani, Nobutake and Arai, Kaori and Masuno, Tomoe and Koseki, Masakazu and Itabashi, Hideyuki and Tanaka, Kazuhiko (2013) Indirect UV Detection-€“Ion-exclusion/Cation-exchange Chromatography of Common Inorganic Ions with Sulfosalicylic Acid Eluent. Analytical Sciences, 29 (1). pp. 121-126. ISSN 0910-6340

Kuppusamy, Palaniselvam and M. M., Yusoff and Mohammed, Suliman and Gaanty Pragas, Maniam and Govindan, Natanamurugaraj (2013) Preliminary Identification of Bioactive Compounds from Commelina nudiflora. L and its Antioxidant, Antibacterial Activities. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. p. 1..

L

L. H., Shah and A. R., Razali and M., Ishak (2013) Investigation of Aluminum-Stainless Steel Dissimilar Weld Quality using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8 . pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online)

L. H., Shah and Nur Azhani, Abd Razak and Juliawati, Alias and M., Ishak (2013) Investigation on the Mechanical Properties of TIG Welded AA6061 Alloy Weldments using Different Aluminium Fillers. GSTF Journal of Engineering Technology, 2 (2). p. 116. ISSN 2251-3701 (print); 2251-371X (online)

L. H., Shah and Zetty Akhtar, Abd Malek and M., Ishak (2013) Investigation on Aluminium-Stainless Steel Dissimilar Weld Quality Using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8 . pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online)

KOMITOV Lachezar (2013) Polymer Network Stabilized Flexoelectric Polarization. 20130114008.

Lagunesvary, Ganesan (2013) Heat exchanger for solar collector. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Lai, Saw Wai (2013) Simulating modelling for improving productivity of rice packaging mill. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Lai Kin Ming, Vera (2013) Preparation and characterization of catalyst from local industry waste, red gypsum for biodiesel synthesis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Laing, Penelope Ering (2013) Effects of media components on arachidonic acid production by Candida krusei under submerged condition. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Latifah Sakinah, Ismail (2013) Thermodynamic analysis of glycerol dry reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lau, Siaw Jing (2013) Thermal degradation kinetics of bioflavonoids from Orthosiphon stamineus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lazim, Yusra Yaseen and Noor Azlinna, Azizan (2013) The influence of Human Resources Management Practices, and Government’s Role in the Organizational Performance of Small Businesses in Malaysia. Asian Journal of Management Research, 4 (2). pp. 266-287. ISSN 2229-3795

Lee, Chia Kuang and Noor Azlinna, Azizan and Fadzida, Ismail and Nurhaizan, Mohd Zainudin (2013) Developing a Proactive Model to Assess Safety and Health Performance in Electrical and Electronic (E&E) Manufacturing Industries. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET) , 3-4 DECEMBER 2013 , MS GARDEN HOTEL KUANTAN, PAHANG. pp. 1-2..

Lee, Yue Wei (2013) Development of anion-exchange membrane chromatography from regenerated cellulose membrane by attaching different spacer arm length of diamine monomer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lee, Chee Wor (2013) Stress behaviour of tailor welded blanks for dissimilar metals using finite element method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Chia Kuang and Yusmin, Jaafar (2013) Prioritization of Factors Influencing Safety Performance on Construction Sites: A Study Based on Grade Seven (G7) Main Contractors' Perspectives. In: International Proceedings of Economics Development and Research: International Conference on Business, Management and Governance (ICBMG2012), 29-30 December 2012 , Hong Kong. pp. 6-12., 57. ISSN 2010-4626

Lee, Ho Cheong and Siti Normaziah, Ihsan (2013) Business opportunities arising from cloud computing in information technology industry. Bit@FSKKP . pp. 17-21. ISSN 1985-7969

Lee, Kok Keong (2013) To design rainwater collection system for domestic use and the economic cost analysis of the system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Lee, Tsu Xin (2013) Evaluating the performance of material handling system using simulation. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Lee Jian, Hao (2013) The implementation of partial graph heuristic with improvement method to solve the UMP examination timetabling problem. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Lee Lay, Khoon (2013) Dynamic web-based driver task assignment calendar system project. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Lee Siew, Ling (2013) Microencapsulation and Spray Drying of Orthosiphon Staminues. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Lee Sim, Siew (2013) Patient's Chatting Mechanism Serious Game for Internal Medicine Practice. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Leenaloshni, Joganathan and A., Zulkiple (2013) Walkway Subgrade Stabilization Using Fly Ash. Procedia Civil Engineering .

Leon, Mei Chen (2013) Pitting corrosion behaviour of aluminium alloys. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Leong, Guo Bang (2013) Fabrication of air-hybrid all terrain vehicles front suspension system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Leong, Sheng Yau (2013) Copper doped titanium dioxide (TiO2) nanoparticles for enhanced photocatalytic activity under visible light irradiation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Liew, Kean Teong (2013) Design and implementation of adaptive conveyer belt for material sorting and handling assisted with image processing technology control by microcontroller. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang .

Liew, Siau-Chuin and Liew, Siau-Way and Jasni, Mohamad Zain (2013) Tamper Localization and Lossless Recovery Watermarking Scheme with ROI Segmentation and Multilevel Authentication. Journal of Digital Imaging, 26 (2). pp. 316-325. ISSN 0897-1889

Lim, Beng Seng (2013) Production and characterization of chitosan from shrimp shells. Faculty of Chemical & Natural Resources Engineerig, Universiti Malaysia Pahang.

Lim, Tien Yong (2013) Productivity improvement through re-design workplace area. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lim Jun, Lun (2013) A study of the vibration signals behavior. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Lim Ruey, Long (2013) Solving Toronto Examination Timetabling Using Heuristic Method. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Lin, Choo Quan (2013) Simultaneous power generation and waste water treatment using microbial fuel cell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ling, Yeu Shin (2013) Study on the effect of processing parameters in the adsorption of xylose from glucose-xylose mixture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Liu, Yao and A. N., Abdalla (2013) Evaluating the Managerial Behavior of Managing Knowledge in Chinese SMEs. Information Technology and Management, 14 (2). pp. 159-165. ISSN 1385-951X(Print); 1573-7667(Online)

Liza Evianti, Tanjung (2013) Assessment of heavy metal deposition in surface water and sediment in Balok and Tunggak River, Kuantan, Malaysia. Masters thesis, Universiti Malaysia Pahang.

Loh, Chong Sean (2013) Design, fabrication & testing of water channel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Loh, Quo Liang (2013) Experimental analysis into the main artery of 2 chamber heart model during cardiac cycle. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Lok, Leh Leong (2013) Soft set approach for decision attribute selection in data clustering. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Loke, Yi San (2013) A study of causes and effects of conflict in construction industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lokman, Faradianna E. and Harvest, F. Gu and Wan Nazaimoon, Wan Mohamud and M. M., Yusoff and Keh, Leong Chia and Claes-Göran, Östenson (2013) Antidiabetic Effect of Oral Borapetol B Compound, Isolated from the Plant Tinospora crispa, by Stimulating Insulin Release. Evidence-Based Complementary and Alternative Medicine , 2013 .

Loo Zhang, Bin (2013) Automatic question determination level based on OBE using brute force string matching. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Luqman Hakim, Ahmad Shah (2013) Wajarkah Malaysia miliki loji nuklear. Berita Harian, (19 Au . p. 27.

Luqman Nulhaqem, Abdul Aziz (2013) Influence of heat treatment on the microstructure and mechanical properties of 6061 aluminum alloy. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lutfor, M. R. and M. M., Yusoff and Hegde, Gurumurthy and Muhammad, Nor Fazli and Abdul, Malek and Nurlin, Abu Samah and H. T., Srinivasa (2013) Synthesis of Banana-Shaped Liquid Crystals for Photoswitching Properties. Molecular Crystals and Liquid Crystals, 587 . pp. 41-53. ISSN 1542-1406 (print); 1563-5287 (online)

M

M., Ishak and Tahseen, Tahseen Ahmad and M. M., Rahman (2013) Experimental Investigation on Heat Transfer and Pressure Drop Characteristics of Air Flow over a Staggered Flat Tube Bank in Crossflow. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (2013). pp. 900-911. ISSN 2229-8649 (Print); 2180-1606 (Online)

M., Ishak and Tahseen, Tahseen Ahmad and M. M., Rahman (2013) Laminar Forced Convection Heat Transfer over Staggered Circular Tube Banks: A CFD Approach. Journal of Mechanical Engineering and Sciences (JMES), 4 (June 2). pp. 418-430. ISSN 2231-8380 (online)

M., Sarizam and H., Terasaki and Y., Komizo (2013) Effect of Holding Temperature to Bainite Transformation in Cr Mo Steel. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-11..

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2013) Characteristics of Welded Thin Sheet AZ31 Magnesium Alloy. In: Experimental and Numerical Investigation of Advanced Materials and Structures. Advanced Structured Materials, 41 . Springer International Publishing, pp. 147-160. ISBN 978-3-319-00505-8 (print), 978-3-319-00506-5 (online)

M., Kamal and M. M., Rahman and M. S. M., Sani (2013) Application of Multibody Simulation for Fatigue Life Estimation. International Journal of Automotive and Mechanical Engineering (IJAME), 7 . pp. 912-923. ISSN 1985-9325(Print); 2180-1606 (Online)

M., Kamal and M. M., Rahman and M. S. M., Sani (2013) Fatigue Life Prediction Using Simplified Endurance Function Model. Advances in Mechanical Engineering, 2013 (581754). pp. 1-12. ISSN 1687-8132 (Print); 1687-8140 (Online)

M., Saifizi and M. Z., Ab Muin and Sazali, Yaacob and M. S., Mohamad (2013) Comparison of Arx and Armax Model for Thermoelectric Refrigerator. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10..

M., Shakaib and Iqbal, Ahmad and R. M., Yunus and Mohd Zulkifli, Mohamad Noor (2013) Preparation and Characterization of Modified Nylon 66 Membrane for Blood Purification. International Journal of Polymeric Materials and Polymeric Biomaterials, 63 . pp. 80-85. ISSN 0091-4037(Print); 1563-535X(Online)

M. A., Aris and Zahari, Taha and M. H. A., Hassan (2013) The Influence of Football Boot Construction on Ball Velocity and Deformation. In: International Conference on Mechanical Engineering Research (ICMER 2013), 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

M. A., Azmi and H. Z., Abdullah and M. I., Idris (2013) Properties of Polyurethane Foam/Coconut Coir Fiber as a Core Material and as a Sandwich Composites Component. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-7..

M. F., Abas (2013) Autonomous formation flight control of multiple UAVs with motion capture system. PhD thesis, Chiba, Japan : Chiba University.

M. H., Sulaiman (2013) An Application of Differential Search Algorithm in Solving Non-Convex Economic Dispatch Problems with Valve-Point Effects. International Review on Modelling and Simulations (I.R.E.M.O.S), 6 (5). pp. 1593-1599. ISSN 1974-9821

M. H., Sulaiman (2013) Differential Search Algorithm for Economic Dispatch with Valve-Point Effects. In: The 2nd International Conference on Engineering and Applied Science 2013 (ICEAS 2013), 15-17 Mar 2013 , Toshi Center Hotel, Tokyo, Japan. . (Unpublished)

M. H., Sulaiman (2013) Pengajaran di sebalik kehidupan serangga. Berita Harian, (13 Au . p. 26.

M. H., Sulaiman and Mohd Wazir, Mustafa (2013) Solving Economic Dispatch Problems with Practical Constraints Utilizing Differential Search Algorithm. In: 2013 IEEE Symposium on Humanities, Science and Engineering Research (SHUSER), 23-25 June 2013 , Pulau Pinang. pp. 310-314.. ISBN 978-1-4799-0443-3

M. H., Sulaiman and Z. N., Zakaria and Muhammad Ikram, Mohd Rashid and S. R., Abdul Rahim (2013) A New Swarm Intelligence Technique for Solving Economic Dispatch Problem. In: 2013 IEEE 7th International Power Engineering and Optimization Conference, 3-4 June 2013 , Langkawi, The Jewel of Kedah.. pp. 199-202..

M. H. A., Hassan and Zahari, Taha and Zulfika, Anuar and M. A., Aris (2013) Brain Acceleration During Ball-To-Head Impact in Soccer. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-6.. (Unpublished)

M. Hussein, Adnan and R. A., Bakar and K., Kadirgama and Sharma, K. V. (2013) Simulation Study of Turbulent Convective Heat Transfer Enhancement in Heated Tube Flow Using Tio2-Water Nanofluid. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online)

M. M., Noor and Andrew P., Wandel and Talal, Yusaf (2013) Detail Guide for Cfd on the Simulation of Biogas Combustion in Bluff-Body Mild Burner. In: International Conference on Mechanical Engineering Research (ICMER2013), , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-25.. (Unpublished)

M. M., Noor and Andrew P., Wandel and Talal, Yusaf (2013) The Development of Mild Combustion Open Burner Experimental Setup. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-20.. (Unpublished)

M. M., Noor and Talal, Yusaf and Baker, P. and Hamawand, I. (2013) Effect of Compressed Natural Gas Mixing on the Engine Performance and Emissions. International Journal of Automotive and Mechanical Engineering (IJAME), 8 . pp. 1416-1429. ISSN 1985-9325(Print); 2180-1606 (Online)

M. M., Noor and Talal, Yusaf and Wandel, Andrew P. (2013) Mild Combustion: The Future for Lean and Clean Combustion. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-15..

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) The Analysis of Recirculation Zone and Ignition Position of Non-Premixed Bluff-Body for Biogas Mild Combustion. International Journal of Automotive and Mechanical Engineering (IJAME), 8 . pp. 1176-1186. ISSN 1985-9325(Print); 2180-1606 (Online)

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) Design and Development of MILD Combustion Burner. Journal of Mechanical Engineering and Sciences (JMES) , 5 . pp. 664-676. ISSN 2289-4659 (print); 2231-8380 (online)

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) Numerical Study of Oxygen Dilution and Temperature Distribution of Biogas Combustion in Bluff-Body MILD Burner. In: Proceedings of the Australian Combustion Symposium, November 6-8, 2013 , The University of Westerm Australia. .

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2013) Discretization of Three Dimensional Non-Uniform Grid: Conditional Moment Closure Elliptic Equation Using Finite Difference Method. In: Proceedings of the 3rd Malaysian Postgraduate Conference (MPC) 2013, 4-5 July 2013 , Sydney, Australia. pp. 48-60..

M. M., Yusoff and Hegde, Gurumurthy and Lutfor, M. R. and Muhammad Nor Fazli, Abd Malek and Srinivasa, Hosapalya T. and Kumar, Sandeep (2013) New Pyrimidine-based Photo-switchable Bent-core Liquid Crystals. New Journal of Chemistry, 37 (8). pp. 2460-2467. ISSN 1144-0546

M. M., Yusoff and Lutfor, M. R. and Hegde, Gurumurthy and Mahrokh, Azazpour and Sandeep, Kumar (2013) Synthesis and Characterization of Liquid Crystalline Azobenzene Chromophores with Fluorobenzene Terminal. Journal of Fluorine Chemistry, 156 . pp. 230-235. ISSN 0022-1139

M. M., Yusoff and Mehdi, Qasim and Al-Dabbagh, Jinan B. and A. N., Abdalla and Hegde, Gurumurthy (2013) Radial Basis Function Neural Network Model for Optimizing Thermal Annealing Process Operating Condition. Nano Hybrids , 4 . pp. 21-31. ISSN 2234-9871

M. M., Yusoff and Muhammed, B. Suliman and Nour, A. H. and Azhari, H. Nour and Kuppusamy, Palaniselvam and A. R., Yuvaraj and Adam, Mazza S. (2013) Fatty Acid Composition and Antibacterial Activity of Swietenia Macrophylla King Seed Oil. African Journal of Plant Science, 7 (7). pp. 300-303. ISSN 1996-0824

M. M., Yusoff and Rajan, Jose and K. F., Chong and Radhiyah, Abd Aziz and Izan Izwan, Misnon (2013) Layered Sodium Titanate Nanostructures as a New Electrode for High Energy Density Supercapacitors. Electrochimica Acta, 113 . pp. 141-148. ISSN 0013-4686

M. M., Yusoff and Rasha, Ata Alaa and Hegde, Gurumurthy and Arun, M Isloor and Boodappa, Chandrakantha and Shridhar, Mallad and Lachezar, Komitov (2013) Nano-Engineering of New Photoreactive Materials Having Fluorine Units: Synthesis and Photoalignment of Liquid Crystals. Soft Nanoscience Letters, 3 (1). pp. 1-6. ISSN 2160-0600 (print), 2160-0740 (online)

M. N., Mat Hassan and Norhidayah, Abdull (2013) Assessment of Freshwater Quality in Endau Area. International Journal of Technology Management, 2 . pp. 73-83. ISSN 2289-2753

M. R., Abdul Hamid and Zainol, Mustafa and Fazli, Idris and Mokhtar, Abdullah and Nur Riza, Mohd Suradi and Wan Rosmanira, Ismail (2013) Multi-Factor Of Cultural Values: A Confirmatory Factor Analytic Approach. Quality & Quantity, 47 . pp. 499-513. ISSN 0033-5177

M. R., Abdul Hamid and Zainol, Mustafa and Nur Riza, Mohd Suradi and Fazli, Idris and Mokhtar, Abdullah (2013) Perbandingan Anggaran Parameter Terhadap Model Kecemerlangan Prestasi Institut Pengajian Tinggi (IPT) Bersandarkan Nilai Teras: Pendekatan Penganggaran Kebolehjadian Maksimum (ML) dan Kuasa Dua Terkecil Separa (PLS). Sains Malaysiana, 42 (8). pp. 1159-1166. ISSN 0126-6039

M. R., Mohamed and H., Ahmad and M. N., Abu Seman and S., Razali and M. S., Najib (2013) Electrical Circuit Model of a Vanadium Redox Flow Battery Using Extended Kalman Filter. Journal of Power Sources, 239 . pp. 284-293. ISSN 0378-7753

M. R. M., Rejab and Cantwell, W. J. (2013) The Mechanical Behaviour of Corrugated-Core Sandwich Panels. Composites Part B: Engineering, 47 . pp. 267-277. ISSN 1359-8368

M. S., Idris and N. M. M., Ammar and T. M. Y. S., Tuan Ya and A. M., Amin (2013) Transient Semi-Circular Lid-Driven Cavity Flow Using Nonuniform Structured Grid Method with Upwind Scheme. Journal of Mechanical Engineering and Sciences (JMES) , 5 . pp. 713-722. ISSN 2289-4659 (print); 2231-8380 (online)

M. S., Idris and N. M. M., Ammar and Tuan Mohammad Yusoff, Tuan Ya and At-Tasneem, Mohd Amin (2013) Transient Semi Circular Lid Driven Cavity Flow Using Non Uniform Structured Grid Method with Upwind Scheme. Journal of Mechanical Engineering and Sciences (JMES) , 5 . pp. 713-722. ISSN 2289-4659 (print); 2231-8380 (online)

M. S., Jadin and Kamarul Hawari, Ghazali and Soib, Taib (2013) Thermal Condition Monitoring of Electrical Installations Based on Infrared Image Analysis. In: Electronics, Communications and Photonics Conference (SIECPC), 2013 Saudi International, 27-30 April 2013 , Riyadh. pp. 1-6..

M. S., Najib (2013) Teknologi Pengesanan Bau Secara Saintifik. CREATE . p. 64. ISSN 1823-7487

M. S., Najiha and M. M., Rahman and A. R., Yusoff (2013) Modeling of the End Milling Process for Aluminium Alloy AA6061T6 Using HSS Tool. International Journal of Automotive and Mechanical Engineering (IJAME), 8 . pp. 1140-1150. ISSN 1985-9325(Print); 2180-1606 (Online)

M. S. Azman, Abdul Rahim and Jailani, Salihon and M. M., Yusoff and M. Rizal, Martua Damanik (2013) Antioxidative Activity and Phenols Content in Five Tropical Lamiaceae Plants. Journal of Tropical Resources and Sustainable Science, 1 (2013). pp. 49-54. ISSN 2289-3946

M. S. M., Sani and Ouyang, H. and Cooper, J.E. and Che Ku Eddy Nizwan, Che Ku Husin (2013) Smart Methodology of Stiffness Nonlinearity Identification Vibration System. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10.. (Unpublished)

M. Surenderen, Morgan (2013) Performance of Proton Green Mobility Challenge electric car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

M. Z., Muzzakar and S., Ahmad and M. A., Yarmo and A., Jalar and Mohd Bijarimi, Mat Piah (2013) Shear Strength of Single Lap Joint Aluminium-Thermoplastic Natural Rubber (Al-TPNR) Laminated Composite. Journal of Physics: Conference Series, 423 . pp. 1-6. ISSN 1742-6588

MUHAMMAD SYAMIM, EMBONG (2013) Wind hazard in peninsular Malaysia: level of awareness. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mahadevan, Deshan (2013) Fiber characterisation of oil palm empty fruit bunch OPEFB)enzymme treatment and ultrasound treatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mahendran, Moorthy and H.L., Ong and Lee, Giok Chui and K., Thanikaikumaran (2013) An Experimental comparison study between Single-Axis Tracking and Fixed Photovoltaic Solar Panel Efficiency and Power Output: Case Study in East Coast Malaysia. In: Sustainable Development Conference 2013, 21-23 June 2013 , Bangkok, Thailand. .

Mahendran, Samykano and Lee, Giok Chui and Shahrani, Anuar and R. A., Bakar and K., Kadirgama and Amir, Abdul Razak and Sharma, K. V. (2013) Diurnal Pattern and Estimation of Global Solar Radiation in East Coast Malaysia. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-14.. (Unpublished)

Mahfuzah, Mustafa and M. Nasir, Taib and Zunairah, Murat and Sahrim, Lias and Norizam, Sulaiman (2013) Statistical Analysis of Balanced Brain and IQ Applications. In: IEEE 3rd International Conference on System Engineering and Technology (ICSET) 2013, 19-20 August 2013 , UiTM, Shah Alam. pp. 157-161..

Mahfuzah, Mustafa and Mohd Nasir, Taib and Sahrim, Lias and Zunairah, Murat and Norizam, Sulaiman (2013) EEG Spectrogram Classification Employing ANN for IQ Application. In: Technological Advances In Electrical, Electronics And Computer Engineering (TAEECE), 9-11 May 2013 , Konya. pp. 199-203..

Mahfuzah, Mustafa and Nor Anis Aneza, Lokman (2013) kNN Classification of Epilepsy Brainwaves. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Mahfuzah, Mustafa and Norizam, Sulaiman (2013) Classification of EEG Spectrogram Using ANN for IQ Application. In: The International Conference on Technological Advances in Electrical, Electronics and Computer Engineering, 9-11 Mei 2013 , Mevlana University, Turki. . (Unpublished)

Maizatul Asnida, Hassan (2013) Optimization of the electrical discharge machining performance on titanium alloy by using statistical method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Maizatul Mastura, Muhammad Nazri (2013) Aluminium chip waste for secondary materials using direct recycling process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Makeen, Mohd Amin and Abdul, Hadi and M. F., Ghazali (2013) Leakage Detection in Pipeline Using Synchrosqueeze Wavelet Transform. Applied Mechanics and Materials, 465-466 . pp. 467-471. ISSN 1662-7482

Makky, Essam A. and Jee, Jian Ong and Karim, Md. Rezaul and Lee, Chin Mei (2013) Production and Optimization of L-asparaginase by Bacillus sp. KK2S4 From Corn Cob. African Journal of Biotechnology, 12 (19). pp. 2654-2658. ISSN 1684-5315

Makky, Essam A. and Mohd Rasdi, S. H. and Al-Dabbagh, Jinan B. and Najmuldeen, Ghazi Faisal (2013) Microbial Utilization Of Waste for Nanoparticles Production. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Universiti Malaysia Pahang (2013) Method for Bioleaching of Silver Nanoparticles Under Thermophilic Conditions. 2013001239.

Mani, Shalini (2013) Extraction and characterization of Jatropha Curcas Linnaues seed oil through soxhlet method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mansor, Sulaiman (2013) Characteristics Of Those Who Dominated And Those Who Were Dominated From Historical Verses In al-Quran: Lessons Learnt Analysis. Quranica, International Journal of Quranic Research, 5 (2). pp. 73-90. ISSN 2289-5396

Mansor, Sulaiman (2013) Memahami Konsep Sebab dan Akibat. Majalah Q&A (21). pp. 94-95. ISSN 2232-0083

Mansor, Sulaiman (2013) Persoalan Pewarisan Kuasa Menurut al-Quran: Analisis Politik Dunia Islam Hari Ini. In: Prosiding Quran: Melonjak Transformasi Ummah, 20-21 November 2013 , Fakulti Pengajian Quran dan Sunnah, USIM. pp. 357-370..

Mansor, Sulaiman and Hasan, Ahmad and Ahmad Irfan, Ikmal Hisham and Noradilah, Md Nordin and Saharudin, Ramli (2013) Had Al-Kifayah Di Kalangan Masyarakat Islam: Merungkai Keperluan Kaedah Penentuan Garis Miskin Dan Kaya Berasaskan Sunnah Di Malaysia. In: Seminar Antarabangsa Sunnah Nabawiyah (Musnad 2) : Realiti dan Cabaran, 3-4 July 2013 , Akademi Pengajian Islam, Universiti Malaya. pp. 1-14.. (Unpublished)

Mansor, Sulaiman (2013) Apa sebenarnya yang ‘kita’ takutkan? CREATE . pp. 68-69. ISSN 1823-7487

Mansor, Sulaiman (2013) Janji kemenangan tegak kebenaran. Berita Harian, (11 Ma . p. 31.

Mansor, Sulaiman (2013) Janji kemenangan tegak kebenaran. Berita Harian .

Mardina, Abdullah and Badariah, Bais and Alina Marie, Hasbi and Rosadah, Abd Majid and Baharudin, Yatim and Mohd Alauddin, Mohd Ali and Siti Aminah, Bahari and Noridawaty, Mat Daud and Mohd Hezri, Mokhtar and Ahmad Faizal, Mohd Zain and Mhd Fairos, Asillam (2013) Development of UKM-SID Teaching Module for Space Science Education. Procedia - Social and Behavioral Sciences, 102 . pp. 80-85. ISSN 1877-0428(print); 1877-0428(online)

Marlina, Yakno (2013) Intelligent hand vein image exposure system to aid peripheral intravenous access. Masters thesis, Universiti Sains Malaysia.

Maryudi, M. and Anwaruddin, Hisyam and R. M., Yunus and Beg, M. D. H. (2013) Thermo-oxidative Degradation of High Density Polyethylene Containing Manganese Carboxylate. International Journal of Engineering Research and Applications (IJERA), 3 (2). pp. 1156-1165. ISSN 2248-9622

Mashur, Samhuji (2013) Experimental Analysis on Active Bandwidth Estimation Tools for Mesh Wireless Local Area Network (WLAN). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Mazlan, Abu Seman and Yuantian, Feng and Z. M., Jaini (2013) Computational modelling of reinforced concrete wall subjected to transformer tank rupture. In: Research and Applications in Structural Engineering, Mechanics and Computation. CSC Press, pp. 1-5.

Mazlina, Abdul Majid and Herawan, Tutut (2013) Modelling Reactive and Proactive Behaviour in Simulation: A Case Study in a University Organisation. International Journal of Multimedia and Ubiquitous Engineering (IJMUE), 8 (6). pp. 329-338. ISSN 1975-0080

Mazlina, Abdul Majid and Masitry, Ananthi Krishnasami and Muhammad Zulfahmi Toh, Abdullah and Sutarman, and Herawan, Tutut (2013) An Investigation on Learning Performance among Disabled People Using Educational Multimedia Software: A Case Study for Deaf People. International Journal of Bio-Science and Bio-Technology (IJBSBT), 5 (6). pp. 9-20. ISSN 2233-7849

Mazni, Ismail (2013) Model development and validation of samaria doped ceria (SDC) based solid oxide fuel cell operating with practical fuels. PhD thesis, University of Waterloo.

Mazrul Nizam, Abu Seman and Nidal, Hilal and M., Khayet (2013) UV-Photografting Modification of NF Membrane Surface for NOM wfouling Reduction. Desalination and Water Treatment, 51 (25-27). pp. 4855-4861. ISSN 1944-3994

Md, Izzuddin (2013) Hala tuju graduan dipantau. Metro .

Md Asyraf Zulfadhly, Md Zainudin (2013) The effects of pin profile on joining aluminium alloy by using friction stir welding technique. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Md Izzuddin, . (2013) Mudah kenal pasti mutu air. Berita Harian .

Md Razak, Daud and Syahrullail, Samion and Azli, Yahya and Nazriah, Mahmud and Nor Liyana Safura, Hashim and Kartiko, Nugroho (2013) The Effect of Current Rates on Surface SKD 11 for Electrical Discharge Machine Die Sinker. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-7..

Mei, Charlotte Kho Sui (2013) Investigating oil mixture flow characterization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mimi Rabita, Abdul Wahit (2013) Azwan usahawan contoh. Berita Harian .

Mimi Rabita, Abdul Wahit (2013) Dua minggu di Kaherah. Berita Harian .

Mimi Rabita, Abdul Wahit (2013) Kembara Pahang FM,UMP. Berita Harian .

Mimi Rabita, Abdul Wahit (2013) Latihan kemahiran UMP dengan ECERDC laksana program untuk belia di Kuala Pahang. Harian Metro .

Mimi Rabita, Abdul Wahit (2013) Pelajar UMP ke Medan. Berita Harian .

Mimi Rabita, Abdul Wahit (2013) Pelajar UMP melalui kehidupan harian seorang penternak. Berita Harian .

Mimi Rabita, Abdul Wahit (2013) Perbincangan isu air UMP-UoS di Seoul. Berita Harian .

Mimi Rabita, Abdul Wahit (2013) UMP kongsi kepakaran di Jepun. Berita Harian .

Mimi Rabita, Abdul Wahit (2013) UMP teroka kerjasama dengan IPT Turki. Berita Harian .

Miminorazeansuhaila, Loman and Che Ku Eddy Nizwan, Che Ku Husin and Norshalawati, Mat Yusof (2013) Defect Detection on Welding Joint using Acoustic Emission Technology. In: International Conference on Innovations in Engineering and Technology (ICIET'2013), 25-26 December 2013 , Bangkok, Thailand. pp. 154-157..

Mior Ahmad Khushairi, Mohd Zahari (2013) Scaling up of poly (3-hydroxybutyrate) production from oil palm frond juice by Cupriavidus necator (CCUG52238T). Research Journal of Chemistry and Environment, 17 (7 ). pp. 18-24. ISSN 0972-0626 (Print), 2278-4527 (online)

Mior Ahmad Khushairi, Mohd Zahari and Dhiyatul Ridhwan, Md Nasarudin (2013) Potential Evaluation of Oil Palm Frond Juice for The Production of Bioethanol. In: Conference on Industrial Academia Initiative in Biotechnology (CIA:Biotech 2013), 5-7 December 2013 , Equatorial Cameron Highlands,Pahang. .

Universiti Putra Malaysia (2013) Renewable Sugars From Oil Palm Wastes. WO/2013/043036.

Mir, Sujaul Islam and B. S., Ismail and Muhammad Barzani, Gasim and A. R., Sahibin and T., Mohd Ekhwan (2013) Hydrological Assessment and Suspended Sediment Loading of the Chini Lake Catchment, Pahang, Malaysia. International Journal of Water Resources and Environmental Engineering, 5 (6). pp. 303-309. ISSN 1991-637X

Mir, Sujaul Islam and Hossain, Mohamed Amjed and Nasly, Mohamed Ali (2013) Multivariate Statistical Techniques to Identify the Source of Pollution and Assessment of Surface Water Quality. International Journal of Ecology and Environmental Sciences, 39 (3). pp. 187-193. ISSN 2320-5199

Mir, Sujaul Islam and Hossain, Mohamed Amjed and Sobahan, Md Abdus and Ideris, Zakaria (2013) Spatial Distribution of Soil Properties and Heavy Metals Content around the Chini Lake Watershed. In: 4th Regional AFOB Symposium 2013, 17-19 Januari 2013 , Chiangmai Grandview Hotel and Convention Center, Thailand. p. 37..

Mir, Sujaul Islam and Hossain, Mohamed Amjed and Sobahan, Md Abdus and Rasul, M. G. and Zakaria, I. (2013) Impact of Industrial Effluents on Water Quality of Receiving River in Gebeng Estate, Kuantan, Pahang. In: National Conference on Industry-Academia Initiatives in Biotechnology (CIA:BIOTECH13), 5-7 December 2013 , Equatorial Cameron Highlands, Pahang. p. 53..

Mir, Sujaul Islam and Sobahan, Md Abdus and Ideris, Zakaria and Hossain, Mohamed Amjed (2013) Surface Water Contamination Due to Industrial Activities in Gebeng Area, Kuantan, Malaysia. In: International Conference on Civil and Architecture Engineering (ICCAE'2013), 6-7 May 2013 , Kuala Lumpur. pp. 53-61..

Mira Syahirah, Abd Wahit (2013) Utilizing classical scaling for fault identification based on continuous-based process. Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Miss Hasimawaty, Mat Kiah (2013) Premixed flame acceleration in straight and bend close pipe. Masters thesis, Universiti Teknologi Malaysia .

Moganaraj, Murugiah (2013) Detail experimental testing of unmanned aerial vehicles engine performance. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Afiq, Abdullah (2013) UMP summons system. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Mohamad Arif, Roslan (2013) Evaluation on the performances of a micro gas turbine, gas engine-cogeneration system in sewage treatment plant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Asyraf, Ahmad Bustamang (2013) Modal analysis of electromagnetic actuator for non-contact modal testing. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohamad Azwan, Mohd Ghazali (2013) Modelling the role of acidic species on CO2 corrosion prediction. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Firdaus, Omar (2013) Optimal design of electric bicycle : bicycle frame design. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Hadi, Tairin (2013) Development of polyethersulfone–poly vinylidenefluoride (PES-PVDF) thin film composite membrane FOR CO2/N2 gas separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Hilmi, Mat Said (2013) UMP anjur Rehlah dan Ziarah. CREATE . p. 40. ISSN 1823-7487

Mohamad Khairuazlan, Kamaruzaman (2013) Investigation of chloride stress corrosion cracking in austenitic stainless steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Luqman, Zaki Monsarif (2013) Modeling magneto-rheological damper using neural network and simulated annealing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Maliki, Sulaiman (2013) Design and fabrication of push button coconut palm collector. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohamad Nabil, Nor Azman (2013) Development of short term hydrostatic test for PVC pipes. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohamad Nafis, Jamaluddin (2013) Improvement of boiling process in fish cracker production. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Nasrul, Mohd Nasir (2013) Modelling, simulation and experimental verification of a semi active absorber system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Nazirul Mubin, Merzuki (2013) Tensile properties of alkali treated sugar palm fiber. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohamad Nazreen, Sharan (2013) Design and fabricate a droplet formation nozzle for dispersion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Nazwan, Shafie (2013) Mobi parking navigator system. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Mohamad Norfaiza Anuar, Mahmood (2013) Measurement and validation of fluid structure interface. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Norzuhri, Basirun (2013) A study on Pipeline Inspection Gauge (PIG) Flow Parameters in Small Size Pipe. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Roslan, Dzulkifli (2013) Extraction of anthraquinone glycosides from the mixture of cassia alata stems and leaves. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Rozi, Hassan (2013) PKS perlu bijak manipulasi aset tingkat daya saing. Berita Harian, (7 Mac . p. 29.

Mohamad Rozi, Hassan (2013) PKS perlu bijak manipulasi aset tingkat daya saing. Berita Harian .

Mohamad Ruzaini, Mohamed Ibrahim (2013) Design and fabrication of motorized cutter prototype. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Saiful Anuar, Yusof (2013) Study loan management system (SLMS) with MVC model & servlet. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Mohamad Sazwan, Ismail (2013) Extraction of beta-carotene from carrot via soxhlet extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Shafis, Ahmad Ramli (2013) Design and fabrication of lead detection test rig. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohamad Shahir, Mohamed Nafi (2013) Development of extended range and blended control module for plug-in hybrid air motorcycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Shofi, Mat Isa (2013) Jelajah Ramadan RTM, UMP. Utusan Malaysia .

Mohamad Syahmi, Shahrom and A. R., Yusoff (2013) Experimental Cold Compression of Aluminum 6061 Chips from Different Lubricant Condition. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. p. 1..

Mohamad Syahmi, Shahrom and A. R., Yusoff and Mohd Amri, Lajis (2013) Taguchi Method Approach for Recyling Chip Waste from Machining Aluminum (AA6061) Using Hot Press Forging Process. Advanced Materials Research, 845 . pp. 637-641. ISSN 1022-6680, ESSN: 1662-8985

Mohamad Yusri, Mohamad Zin (2013) Experimental analysis of drowsiness detection system based on grasping steering bahavior. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Mohamad Zaidi, Yahaya (2013) Study on factors affecting extraction of carotene from carrot by using soxhlet extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Zairi, Baharom (2013) Sistem brek elektromagnetik boleh kawal menggunakan arus pusar. Masters thesis, Universiti Kebangsaan Malaysia.

Mohamad Zikril Hakim, Md Saleh (2013) Numerical study on the pipe containing multiple aligned axial cracks. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Zulhilmi, Rosli (2013) Design and fabrication of hybrid tig/heating and mig welding torch holder. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohamad Zulhisyam, Mohd Razmi (2013) Analysis on thin sheet metal feeding characteristic by a servo roll feeder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamed Asshafie, Mohamed Sharif (2013) Solid phase transformation of carbamazepine-fumaric acid cocrystal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad, Ismail (2013) The study of spray characteristics by using video image processing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad, Nasir and Gupta, Arun and Beg, M. D. H. and Chua, Gek Kee and Jawaid, Mohammad and Kumar, Anuj and Ahmed Khan, Tanveer (2013) Fabricating Eco-friendly Binderless Fiberboard from Laccase-treated Rubber Wood Fiber. BioResources, 8 (3). pp. 3599-3608. ISSN 1930-2126 (print); 1930-2126 (online)

Mohammad Affendy, Omardin (2013) Amalan penyelenggaraan dan keselamatan di kediaman anda. CREATE . p. 60. ISSN 1823-7487

Mohammad Affendy, Omardin (2013) Penjenamaan semula tenaga mahir selenggara bangunan. Berita Harian, (22 Fe . p. 31.

Mohammad Affendy, Omardin (2013) Penjenamaan semula tenaga mahir selenggara bangunan. Berita Harian .

Mohammad Afifuddin, Abd Razak (2013) Product design simplification through DMFA methods. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohammad Aizzat, Nawi (2013) Separation of xylose from glucose-xylose solution using ion exchange resins. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Amar, Mohammad Ali (2013) tudy on optimum condition of empty fruit bunch-graft-acrylic acid superabsorbent polymer composites. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Amirulkhairi, Zubir and Azlina, Ismail and Siti Fatimah , Che Osmi (2013) Teams That Teach and Learn using Steered Module in Civil Engineering Courses (TELUS MOD): An Overview. In: Taylor's 6th Teaching and Learning Conference (TTLC2013), 23 November 2013 , Taylor's University, Selangor. .

Mohammad Haeri, Jaiman (2013) Online voting system (ovs) on server site. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Mohammad Haziq, Zamri (2013) The effectiveness of using steel reinforce concrete in comparison with filexible bitumen with polymer modified binder and how it will affect the project time and cost : a case study at kuala lumpur international airport (KLIA). Faculty of Engineering Technology, Universiti Malaysia Pahang.

Mohammad Izzat, Junid (2013) Fabrication of on/off magnetic clamp for welding process. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohammad Khairulnizam, Ibrahim (2013) Development of the small scale piston type briquetting tool. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohammad Nazree, Abd Malek (2013) Conceptual study on hydrogen powered bicycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Shafei, Ramli (2013) Experimental study of alternative tire pyrolysis oil performance operating in single cylinder diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Syahir Syahmi, Hassan (2013) Fabrication of aquaponic dry gravel plantation system for tomato plant. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohammad Syawaludin Syafiq, Hassan and Mohd Razali, Daud (2013) Detection of Emergency Vehicle Using Combination of HSV Color Space and RGB Color Space Technique for Intelligent Traffic Light System. In: International Conference on Artificial Intelligence & Computer Science (AICS 2013), 25 - 26 November 2013 , Bayview Hotel, Langkawi, Malaysia. pp. 1-9.. (Unpublished)

Mohammad Syazwan, Fauzi (2013) Design and development of laser CNC machine structure. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohammed, Kamil and M. M., Rahman and R. A., Bakar (2013) Integrated Simulation Model for Composition and Properties of Gases in Hydrogen Fueled Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 8 . pp. 1242-1255. ISSN 1985-9325 (Print); 2180-1606 (Online)

Mohammed, Muamer N. and Norrozila, Sulaiman (2013) Performance Analysis of DSR, AODV On-Demand Routing Protocols in Mobile Ad hoc Networks. In: The 2013 Annual International Conference on Advances Technology in Telecommunication, Broadcasting, and Satellite (TelSaTech), 2-3 August 2013 , Jakarta, Indonesia. pp. 1-5.. (Unpublished)

Mohammed, Mohammed Adam Taheir and Wan Maseri, Wan Mohd and Ruzaini, Abdullah Arshah and Liu, Yao (2013) Predefined Object Reduction. International Journal of Advanced Research in Computer Engineering & Technology (IJARCET) , 2 (12). pp. 3066-3070. ISSN 2278-1323

Mohammed, Nasir (2013) Fabrication and characterization of medium density fiber board prepared from enzyme treated fiber and lignin based bio adhesive. PhD thesis, Universiti Malaysia Pahang.

Mohammed, Nasir and Gupta, Arun and Beg, M. D. H. and Chua, Gek Kee and Kumar, Anuj (2013) Fabrication of Medium Density Fibreboard from Enzyme Treated Rubber Wood (Hevea brasiliensis) Fibre and Modified Organosolv Lignin. International Journal of Adhesion & Adhesives, 44 . pp. 99-104. ISSN 0143-7496

Mohammed Adam, Ibrahim Fakharaldien and Jasni, Mohamad Zain and A. N., Abdalla and Mohamad Fadli, Zolkipli and Ramdan, Razali (2013) Cloud Computing Model for MyGRANTs Project. In: The 3rd International Conference on Software Engineering & Computer Systems (ICSECS 2013), 20-22 August 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-8., 121. ISSN 03062619 (Unpublished)

Mohammed Al-Sewari, Abdulrahman Ahmed and Kamal Z., Zamli and Mohd Hafiz, Mohd Hassin (2013) Towards Supporting Input-Output Relation within Harmony Search Strategy for T-Way Testing. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS - 2013), 20-22 August 2013 , Universiti Malaysia Pahang. pp. 1-8.. (Unpublished)

Mohammed Zabil, Mohd H. and Kamal Z., Zamli (2013) Test Data Generation for Event Driven System Using Bees Algorithm. In: Postgraduate Research Workshop @ SOFTEC 2013 , Kuala Lumpur. pp. 1-6..

Mohana, Muniapan (2013) Effect of Enzyme Concentration and Temperature on Viscosity and Betacyanin Content From Pitaya Waste Extract. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Abas, Jamaluddin (2013) Structure and tuning internal model control for integrating process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Adnin, Hamidi (2013) Comparison of PRF and toluene/n-heptane mixture in the mechanism of compression ignition using transient species measurements and simplified model analysis. Masters thesis, Toyama University.

Mohd Affendi, Ibrahim (2013) A study on various type of rotor disc brake using fae analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aiman, Mahusin (2013) Design and development of mountain bike rear suspension for all mountain riding style. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Akmal, Mat Ludin (2013) Design of pico-hydro turbine by using a pump as a generator. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Akram, Abdul Razak (2013) Kor SISPA UMP muncul juara. CREATE . p. 44. ISSN 1823-7487

Mohd Amirul Hakim, Hamidi (2013) Removal mercury from wastewater by electrocoagulation using iron plate as electrode. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Anwar, Zawawi and O' Keeffe, S. and Lewis, E. (2013) Plastic Optical Fibre Sensor for Spine Bending Monitoring. Journal of Physics: Conference series, 450 (1). pp. 1-6. ISSN 1742-6588 (print); 1742-6596 (online)

Mohd Ashraf, Abdul Rahman (2013) Study of removal btx by pseudomonas putida in bioreactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Azfar Irfan, Md Nasir (2013) Improvement of soft soil by using fly ash and bottom ash as soil stabilizer. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Azri, Abdul Rahman (2013) 3 axis CNC machine controllers. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Azrin, Mohd Radin (2013) Effect of Solvents and Temperatures on Photo-Reduction of Carbon Dioxide Using Alumina Doped Tio2 Catalysts. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Azrul Hisham, Mohd Adib and Mohd Firdaus, Jaafar (2013) Review: Modelling of Meniscus of Knee Joint During Soccer Kicking. In: 2nd International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-8..

Mohd Azrul Hisham, Mohd Adib and Mohd Firdaus, Mohd Jaafar and Nur Hazreen, Mohd Hasni (2013) Review: Modeling of Meniscus of Knee Joint During Soccer Kicking. In: IOP Conference Series: Materials Science and Engineering, 2nd International Conference on Mechanical Engineering Research (ICMER 2013), 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-9., 50 (012027). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Azrul Hisham, Mohd Adib (2013) Kejuruteraan biomekanik bantu pembangunan negara. Berita Harian, (17 Ju . p. 31.

Mohd Azrul Hisham, Mohd Adib (2013) Kejuruteraan biomekanik bantu pembangunan negara. Berita Harian .

Mohd Azrul Hisham, Mohd Adib and Norashikin, Nor Tuah and Nur Hazreen, Mohd Hasni and Kahar, Osman (2013) Prediction of Blood Pattern in S-Shaped Model of Artery under Normal Blood Pressure. Journal of Mechanical Engineering and Sciences (JMES) , 4 . pp. 496-503. ISSN 2289-4659 (print); 2231-8380 (online)

Mohd Azrulnizam, Suna Abdullah (2013) Greenvec game for skin conductivity level (SCL) biofeedback performance simulator using galvanic skin respnose (GSR) sensor. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Mohd Ehran, Razali (2013) Study on batch adsorption process of Monoethanolamine (MEA) wastewater treatment using rice husk and banana peels. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Erman Fairuz, Zaidi (2013) Leakage detection in pipelines using empirical mode decomposition. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Fadhirul Amran, Jali @ Ali (2013) The development of a suspension spring in term of dimension. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadhli, Che Ismail (2013) Modal analysis of dissimilar metal (steel and aluminium) joint by spot wleding. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Fadzil Faisae, Ab. Rashid (2013) Intergrated multi-objective optimisation of assembly sequence planning and assembly line balancing using particle swarm optimisation. PhD thesis, University of Cranfield.

Mohd Faiz, A. Razak (2013) Influence of biodiesel formulation and blending to fuel properties. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Faizal, Md Jaafar and Hamidah, Mohd Saman and Muhd Norhasri, Muhd Sidek (2013) Simultaneous Monitoring on Corrosion-pH-Temperature using Multiplexed Fiber Bragg Grating Sensors Techniques in New RC Structure: A Review. International Journal of Civil Engineering and Geo-Environmental, 4 . pp. 41-49. ISSN 2180-2742

Mohd Faizan, Jamaluddin (2013) Isolation and identification of acetic acid producer from soil using banana stem waste as a substrate. Masters thesis, Universiti Malaysia Pahang.

Mohd Faridhwan, Mohamad Zulkapli (2013) Dynamic model of co2 removal using aspen hysys. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Fikri, Arifin (2013) Modelling magneto-rheological damper using radial basis function neural network. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Firdaus, Ibrahim (2013) Effect of different sodium chloride (NaCl) concentration on corrosion of coated steel. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Firdaus, Mohd Jaafar (2013) Modeling analysis of meniscus of knee joint during soccer kicking. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Firdaus, Mohd Rosli (2013) Design, analysis & fabrication of a scaled down model of an open channel flow flume and weir. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdhaus, Ahmad (2013) Leak detection in pipelines using ensemble empirical mode decomposition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fizree, Abdul Razak (2013) Prediction of wrinkling using finite element simulation. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Hafiezal, Nordin (2013) Development of shaker ( controller ). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Hafiz, Abdul Mutalif (2013) A study on the effectiveness of technology transfer towards the work performance in SME‘s. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Mohd Hafiz, Razak @ Ali (2013) Hydrodynamic behaviour in liquid-liquid flow system: bench scale study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hafiz, Roslan (2013) Online music store (oms). Faculty Of Computer System And Software Engineering, Universiti Malaysia Pahang.

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Rafidah, Rahim and Amir, Aziz and Liyana, Amer Shah (2013) Fuel Physical Characteristics of Biodiesel Blend Fuels with Alcohol as Additives. Procedia Engineering, 53 . pp. 701-706. ISSN 1877-7058

Mohd Hafizil, Mat Yasin and R., Mamat and Amir, Aziz and Ahmad Fitri, Yusop (2013) Cyclic Variations of Combustion Characteristics in Diesel Engine Operating With B20 Blends with Alcohol Additives. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-13.. (Unpublished)

Mohd Hafizuddin, Abdul Rahim (2013) Spray development and combustion simulation for simple injection chamber. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizuddin, Mohamed Ariffin (2013) Solar power inverter. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Mohd Hafizuddin, Mokhtor (2013) Gravity flow vertical farming using aquaphonic system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Hamka, Mohd Jaapar (2013) Design and development of plasma CNC machine structure (plate). Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Hanafi, Shaari (2013) Denitrogenation of model oil using imidazalium-based ionic liquid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hanafi, Shaari (2013) Denitrogenation of model oil using imidazalium-based ionic liquid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hanis, Rani and Abdullah, Embong (2013) Predicting Student Performance in Object Oriented Programming Using Decision Tree : A Case at Kolej Poly-Tech Mara, Kuantan. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS - 2013), 20-22 August 2013 , Universiti Malaysia Pahang. pp. 11-8.. (Unpublished)

Mohd Hasbi, Ab. Rahim and Forde, Michael M. and Hammond, Ceri and Jenkins, Robert L. and Dimitratos, Nikolaos and Lopez-Sanchez, Jose Antonio and Carley, Albert F. and Taylor, Stuart H. and Willock , David J. and Hutchings, Graham J. (2013) Systematic Study of the Oxidation of Methane Using Supported Gold Palladium Nanoparticles Under Mild Aqueous Conditions. Topics In Catalysis, 56 . pp. 1843-1857. ISSN 1572-9028

Mohd Hasnul Mubakir, Osman (2013) Design of signal for electrical drive system for electrical drive system for technology demonstrator. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Hatim Helmi, Mohd Zahariman (2013) Photocatalytic Reduction of CO2 With Solvent on Alumina Supported With Tio2. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Haziq, Khairul Salleh (2013) Two wheeled balanced vehicle. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Haziq, Nordin (2013) Biomechanics analysis of kicking motion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hazli, Mohamed Zabil and Kamal Z., Zamli (2013) Implementing a T-Way Test Generation Strategy Using Bees Algorithm. International Journal of Advances in Soft Computing and Its Application (Int. J. Advance Soft Compu. Appl.), 5 (3). pp. 116-126. ISSN 2074-8523

Mohd Hazwan, Abd Latif (2013) Estimation of operational intention and personal adaptation in power assist system. Masters thesis, Toyohashi University of Technology.

Mohd Hazwan, Hamdan (2013) Solid waste landfill site selection using analytical hierarchy process (AHP): a case study in Kuantan, Pahang, Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Hazwan Syafiq , Harun and Zahari, Taha and Hadi, Abdul Salaam (2013) Sustainable Manufacturing: Effect of Material Selection and Design to the Environmental Impact in the Manufacturing Process. In: IOP Conference Series: Materials Science and Engineering, 2nd International Conference on Mechanical Engineering Research (ICMER 2013), 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-7., 50 (012060). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Helmi, Rasid (2013) Acoustic emission analysis for bearing condition monitoring. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Herwan, Sulaiman (2013) Pengajaran di sebalik kehidupan serangga. Berita Harian .

Mohd Hilmi, Mohd Zin (2013) Computational study of fuel spray structure. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hisyam, Mohd Ariff and Ismarani, Ismail (2013) Livestock Information System Using Android Smartphone. In: Conference on Systems, Process & Control (ICSPC), 13-15 Dec. 2013 , Kuala Lumpur. pp. 154-158..

Mohd Huzaifah, Hamzah (2013) Implementing PCA Based on Fault Detection System Based on Selected Important Variables for Continuous Process. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Idzwanrosli, Mohd Ramly (2013) UMP Racing Team juarai perlumbaan EIMARace 2013. CREATE . p. 30. ISSN 1823-7487

Mohd Iezany, Rosli (2013) Enhancing the efficiency process for separation of dry shell and palm kernel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Izrey Izuan, Mat Lazin (2013) Development of plug-in hybrid electric motorcycle powertrain system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Izuan, Hashim (2013) Vibration suppression of rotating disc using eddy current method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Izzat, Zulkafli (2013) Fabrication of hybrid air ATV rear suspension system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Kamal, Mohd Nawawi and N. M. Zuki, N. M. and Adam Shariff Adli, Aminuddin (2013) Planning and Design of a Knowledge Based System for Green Manufacturing Management. In: IOP Conference Series: Materials Science and Engineering, 2nd International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Kuantan, Pahang, Malaysia. pp. 1-9., 50 (1). ISBN 1757-8981 (print); 1757-899X (online)

Mohd Khairi, Mohammad (2013) Analysis of a spur gear in automative system using finite element software. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Khairi Azri, Shapie (2013) The study of laser drilling of polymeric material. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Khairil Hafizi, Khairolazar (2013) Cutting performance of different coatings during minimum quantity lubricant milling of AA6061T6. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul Anwar, Md Nor (2013) Extraction of bioactive compound from pulp and roots of benincasa hispida a.k.a. kundur. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Khazzarul Khazreen, Mohd Zaidi (2013) Genetic algortihm to solve pcb component placement modeled as travelling salesman problem. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Mizuan, Omar (2013) An investigation of using moringa oleifera seeds oil as lubricant. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Nadzrizal, Mohamad Ghaazali (2013) The study of joining strength based on differential joining technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Najmi, Mohamad (2013) Mahasiswa FKM ke Persidangan Pemimpin Belia Aceh-Malaysia. CREATE . p. 49. ISSN 1823-7487

Mohd Naqiuddin, Harun (2013) Mobi parking navigator system (cost estimation). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Naqiuddin, Mohd Salleh (2013) Experimental and numerical analysis of heat distribution for different joining metal of tailor welded process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nazarni, Che Isa (2013) Effect of pH and Temperature on Fructosyltransferase (Ftase) Production from Candida Krusei. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Nazeri, Mohd Annuar (2013) Optimization of quenching process in hot stamping of boron alloyed steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Na’imullah, Jamaludin (2013) Mobi parking navigator system (user dashboard module). Faculty Of Computer System And Software Engineering, Universiti Malaysia Pahang.

Mohd Noor Zakuan, Rosman (2013) A study on determination moment of inertia of regular-shaped body using trifilar torsional pendulum. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Nor Aidil, Mohd Azlan (2013) Cfd simulation of swirling in fluidized bed by using annular type distributor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nor Amir, Nordin (2013) Design aluminium sacrificial anode properties in soil corrosion. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Norfaez, Ismail (2013) Laser surface modification of gray cast iron using ND: YAG laser for enhanced surface properties. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Norhafifi, Zainudin (2013) Clustering method for bone tissue classification using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Norlihazmey, Ghazali (2013) Car rental system with e-commerce technology using Zend framework. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Mohd Nur Syaffiq, Mahmood (2013) Strength investigation on resistance spot welding of low carbon steel and stainless steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rafi, Mamat (2013) Pembakar semangat saya. Harian Metro .

Mohd Rafi, Mamat (2013) Tolak belajar di India. Harian Metro .

Mohd Rafi’uddin, Ramlan (2013) Hydrogen powered lawnmower. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Raizalhilmy, Mohd Rais and Zainuddin, Mat Hussin and Aziman, Abdullah (2013) Hi-PET – Meraikan Kepelbagaian Bakat Kepimpinan Dalam Organisasi Abad Ke-21. In: Seminar Inovasi Sektor Awam Peringkat Kebangsaan 2013, 18 Nov 2013 , Pulau Pinang. . (Unpublished)

Mohd Rashid, Ab Hamid (2013) Peranan Sains Matematik dalam pembangunan negara. CREATE . p. 66. ISSN 1823-7487

Mohd Rashid, Ab Hamid (2013) Sistem pengukuran prestasi penting dalam organisasi. Berita Harian, (4 Apr . p. 27.

Mohd Rashid, Ab Hamid (2013) Sistem pengukuran prestasi penting dalam organisasi. Berita Harian .

Mohd Rashidi, Maarof (2013) Microstructure and Mechanical Properties of Modified Ductile Ni-resist With Higher Manganese Content. Materials Science and Engineering : A, 574 (2 . pp. 226-234.

Mohd Rashidi, Maarof and Mohd Hasbullah, Idris (2013) Effect of Inoculation On Microstructure, Mechanical and Corrosion Properties of High Manganese Ductile Ni-resist Alloy. Materials and Design, 51 (Oktober). pp. 861-869. ISSN 0261-3069

Mohd Redzuan, Hasan (2013) Experiment and analysis of intake pipe for single cylinder engine. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Ridhuan, Hussain (2013) School student administration system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Ridwan, Kasim (2013) Design and fabricate test rig for kicking soccer ball. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Ridzuan, Darun (2013) Theories should be relevant. New Straits Times, (21 Fe . p. 19.

Mohd Rizal, Azman Rifin (2013) Kasih ibu tiada bandingan. Harian Metro .

Mohd Rozali, Senik and Muhammad Nubli, Abdul Wahab (2013) A Pilot Study of the Effect of Zikir on the Performance Psychology Using Heart Rate Variability (HRV). In: 4th International Graduate Conference on Engineering, Science & Huminities (IGCESH ) 2013, 16-17 April 2013 , Universiti Teknologi Malaysia, Johor. pp. 1-4..

Mohd Rozali, Senik and Muhammad Nubli, Abdul Wahab and Mardiyyah, Zamani (2013) The Study of Heart Rate Variability (HRV) Biofeedback Through Zikir (Islamic Recitation) of High School Students. In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-4..

Mohd Rusllim, Mohamed (2013) Experimental characterisation and modeling of a vanadium redox flow battery. PhD thesis, Universiti Malaysia Pahang.

Mohd Rusllim, Mohamed and Hamzah, Ahmad and Mazrul Nizam, Abu Seman (2013) Estimating the State-of-Charge of All-Vanadium Redox Flow Battery using a Divided, Open-circuit Potentiometric Cell. Electronics and Electrical Engineering = Elektronika ir Elektrotechnika, 19 (3). pp. 37-42. ISSN 1392-1215 (print); 2029-5731 (online)

Mohd Rusllim, Mohamed and M. S., Najib (2013) Review of Redox Flow Batteries as Back Up Storage For Retaining Block Wall For I-Flow Project. In: 3rd Malaysia-Korea Symposium on Watershed Management, 26 - 28 June 2013 , University of Seoul, Korea. pp. 1-6..

Mohd Ruzaimi, Mat Rejab (2013) The mechanical properties of novel lightweight structures based on corrugated-cores. PhD thesis, University of Liverpool.

Mohd Safuan, Ismail (2013) Flexural strength interlocking block beam laterite soil. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Salehuddin, Idres (2013) Active force control on active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Sani, Idris (2013) Investigation of mechanical properties of aluminium-steel welding using different welding technique and processes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Sapar, Maziah (2013) Keberkesanan kaedah latihan biofeedback emwave terhadap prestasi membaca murid-murid linus di Sekolah Kebangsaan Jengka Batu 13, Chenor. Masters thesis, Universiti Malaysia Pahang .

Mohd Shafiq Azrul, Azmi (2013) A study of dynamic characteristics for crack identification. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syahmi, Mohd Nong (2013) A new material supply mechanism for plunger type injection molding. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Syakirin, Zulkarnain (2013) Simulation and Environmental Assessment of Biodiesel Using Supercritical Methanol. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Syazali, Mohd Arif (2013) Process improvement on fish cleaning in fish cracker production. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Syazwan, Safie (2013) Fabrication and Characterization of Bacteria Cellulose, Polyvinyl Alcohol and Fragrant Oil With Antimicrobial Effect For Wound Healing Application. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Syazwi Helmi, Jashari (2013) Automatic inverted pendulum control system. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Mohd Taufiq, Rasdi (2013) Scale up study on production of biodiesel from Jatropha crude oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Yashim, Wong Paul Tze (2013) Development of a simple exoskeleton (hardware). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Yuhyi, Mohd Tadza (2013) Hargai Khazanah Bumi Tanah Liat. CREATE . p. 68. ISSN 1823-7487

Mohd Yusof, Taib and Shahrani, Anuar and Hassan, Ibrahim (2013) Numerical Investigation of Ground Cooling Potential for Malaysian Climate. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Mohd Zaidi, Mohd Tumari and Latifah, Shabudin and Mohd Anwar, Zawawi and L. H., Shah (2013) Active Sway Control of a Gantry Crane Using Hybrid Input Shaping and PID Control Schemes. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-11. ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Zaidi, Mohd Tumari and Latifah, Shabudin and Mohd Anwar, Zawawi and Mohd Razali, Daud (2013) Experimental Investigation on Active Sway Control of a Gantry Crane System using PID Controller. In: 2nd International Conference on Electrical, Control and Computer Engineering (InECCE2013), 27-28 August 2013 , M.S Garden Hotel Kuantan, Pahang. pp. 295-299..

Mohd Zaidi, Mohd Tumari and Mohd Ashraf, Ahmad and Ahmad Nor Kasruddin, Nasir (2013) Composite Fuzzy Logic Control Approach to a Flexible Joint Manipulator. International Journal of Advanced Robotic Systems, 10 . ISSN 1729-8806

Mohd Zaidi, Mohd Tumari and Muhammad Salihin, Saealal and Mohd Riduwan, Ghazali and Yasmin, Abdul Wahab (2013) H-Infinity controller with graphical LMI region profile for Gantry Crane System. In: The Eighteenth International Symposium on Artificial Life and Robotics 2013 (AROB 18th ™'13), 30 Jan - 01 Feb 2013 , Daejeon Convention Center, Daejeon, Korea. pp. 346-351..

Mohd Zaidi, Mohd Tumari and Zuwairie, Ibrahim and Ismail, Ibrahim and Mohd Falfazli, Mat Jusof and Faradila, Naim and Kamarul Hawari, Ghazali and Lim, Kian Sheng and Salinda, Buyamin and Anita, Ahmad (2013) Convergence and Diversity Evaluation for Vector Evaluated Particle Swarm Optimization. In: International Conference of Modelling Identification and Control (ICMIC2013), 31 August - 2 September 2013 , Cairo, Egypt. pp. 280-285..

Mohd Zaidi, Mohd Tumari and Zuwairie, Ibrahim and Kamarul Hawari, Ghazali and Faradila, Naim and Mohd Falfazli, Mat Jusof and Ismail, Ibrahim and Zulkifli, Md. Yusof and Kamal, Khalil and Muhammad Arif, Abdul Rahim and Sophan Wahyudi, Nawawi (2013) A Study of the Contribution of Nearest-Neighbour Thermodynamic Parameters to the DNA Sequences Generated by Ant Colony Optimisation. In: International Conference of Modelling Identification and Control (ICMIC2013), 31 August - 2 September 2013 , Cairo, Egypt. pp. 287-291..

Mohd Zaidi, Sidek and Nur Adjla, Mohamad Hafizin and Ahmad Nasser, Mohd Rose and Khairul Azha, Abd Jalal (2013) Experimental Analysis on Martensite Formation of Low Carbon Steel During Rapid Cooling Process. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Mohd Zaidi, Sidek (2013) The development of a heat assisted section rolling process for strip. PhD thesis, Imperial College London .

Mohd Zaidi, Sidek and Anas Basri, Musthafa and Jasri, Mohamad and Muhamad Rozikin, Kamaluddin (2013) Finite Element Analysis on Dissimilar Thickness Joining of The Tailor-Welded Blank Process. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Mohd Zairulnizam, Mohd Zawawi (2013) UMP, 3 universiti luar negara kongsi kepakaran industri pembuatan. CREATE . p. 22. ISSN 1823-7487

Mohd Zhafir, Mohd Jais (2013) The effectiveness of palm oil fuel ash (POFA) to resist chloride ion in concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Zuki, Salleh and Muhammad Khairul Anuar, Mohamed and Anwar, Muhammad Imran and Shafie, Sharidan and Anuar, Ishak (2013) Effects of Magnetohydrodynamic on Stagnation Point Flow Past a Stretching Sheet in Presence of Thermal Radiation with Newtonian Heating. International Conference on Mathematical Sciences and Statistics 2013 . Springer, Singapore. ISBN 978-981-4585-32-3 (print); 978-981-4585-33-0 (eBook)

Mohd Zuki, Salleh and Muhammad Khairul Anuar, Mohamed and Roslinda, Nazar and Anuar, Ishak (2013) Numerical Investigation Of Stagnation Point Flow Over a Stretching Sheet With Convective Boundary Conditions. Boundary Value Problems, 2013 (4). pp. 1-10. ISSN 1687-2770

Mohd Zulfahmi, Ibrahim (2013) Innovative curing chamber for sustainable green geopolymer brick. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Zulhilmi, Abd Jabar (2013) Analysis of aiming technique in archery shooting. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zuraidi, Salehudin (2013) Behaviour of kenaf fiber reinforced concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd. Aizad, Johari (2013) Application of industrialised building system in school project in Malaysia: the challenge. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd. Fairuz, Yusof (2013) Pelajari penyelidikan, inovasi. Utusan Malaysia .

Mohd. Herzwan, Hamzah and Abdul Adam, Abdullah and Agung, Sudrajad and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2013) Performance of Diesel Engine Operating with Waste Plastic Disposal Fuel. Applied Mechanics and Materials, 465-46 . pp. 423-427. ISSN 1662-7482

Mohd. Zaki, Ahmad (2013) Malam Santai Budaya erat hubungan UMP-UMRAH. CREATE . p. 46. ISSN 1823-7487

Mohd.Halimi, Azman (2013) Mechanistic study of co2 corrosion related to corrosion in oil and gas exploration and production. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohs Ashry, Jusoh and Z., Abbas and M. A. A., Rahman and C. E., Meng and M. F., Zainuddin and F., Esa (2013) Critical Study of Open-ended Coaxial Sensor by Finite Element Method (FEM). International Journal of Applied Science and Engineering, 11 (4). pp. 343-360. ISSN 1727-2394

Mokhtar, Abdullah and Ab Hamid, M. R. and Zainol, Mustafa and Fazli, Idris and Nur Riza, Mohd Suradi (2013) Mediating Effect of Organisational Culture between Leadership Values on Innovation: A Partial Least Squares (PLS) Path-Modeling. Jurnal Teknologi (Sciences and Engineering), 63 (2). pp. 101-105. ISSN 0127-9696 (print); 2180-3722 (online)

Ms., Jebunnesa and Abdullah, Ibrahim (2013) An investigation of the English proficiency of potential nurses from University College Shahputra and Kolej Kejururawatan by Occupational English Writing Test: a case study. IOSR Journal of Humanities and Social Science, 18 (1). pp. 62-63. ISSN 2279-0845 (print), 2279-0837 (online)

Mudabera, Mohammad Hassan and Yuhani, Yusof and Mohd Sham, Mohamad (2013) Some Relations Between Two Stages DNA Splicing Languages. In: Proceedings of the 3rd International Conference on Mathematical Sciences, 17-19 December 2013 , Kuala Lumpur. pp. 254-259..

Mudathir Funsho, Akorede and Muhammad Ikram, Mohd Rashid and Mohd Herwan, Sulaiman and Norainon, Mohamed and Suliana, Ab Ghani (2013) Appraising the Viability of Wind Energy Conversion System in the Peninsular Malaysia. Energy Conversion and Management, 76 . pp. 801-810. ISSN 0196-8904

Muhamad Afiq, Saukit (2013) Conceptual study of hydrogen powered wheelbarrow using fuel cell. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Afiq , Azman (2013) The effect of hollow section to the flexural strength of the beam. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhamad Aizuddin , Abdul Aziz (2013) Effect of fatigue life to the natural frequency of metallic component. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhamad Akmal, Muhamad Yusuf (2013) 3D design of heterogeneous catalytic biodiesel reactor and its plant using Aveva PDMS. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Bakri, Abdul Hamid (2013) Analysis of battery performance on electric bicycle rear wheel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Daud, Azizul Rahman (2013) Photo-Catalytic Reduction of Carbon Dioxide Over Alumina Doped Titanium Dioxide Catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Faruqi , Zahari (2013) A study of drag force on different type of airfoil in a subsonic wind tunnel. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Firdaus, Zaini (2013) Automatic solar power for feeding system for aquaphonic farming. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Hadi, Sulaiman (2013) Solvent screening study of carbamazepine crystal polymorph. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Haffiz, Muhamad Adlin (2013) Intruder detection. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Muhamad Hisyamuddin, Jaffar (2013) Analysis on the performances of autoclaved aerated concretes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Idaham, Umar (2013) Freemium Business Model: The Darkside of free stuff. Bit@FSKKP . p. 12. ISSN 1985-7969 (Unpublished)

Muhamad Ifrad, Ibrahim (2013) The effect of recycled thermoplastic elastomer(TPE) mixing ratio on the tensile strength of thermoplastic elastomer (TPE) polymer. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Khairul Anuar, Shaharuddin (2013) Design and fabrication of handy loose coconut palm collector. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhamad Shafiq, Shahruddin (2013) Analysis of ligament behaviour for healthyhuman leg with or without kneepad after kicking the ball. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhamad Shafiq, Shahruddin (2013) Analysis of ligament behaviour for healthyhuman leg with or without kneepad after kicking the ball. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad, Khan and Norasyidah, Harun and Azhari, H. Nour and Elhussein, Salah A. A. (2013) In Vitro Antioxidant Evaluation of Extracts of Three Wild Malaysian Plants. Procedia Engineering, 53 . pp. 29-36. ISSN 1877-7058

Muhammad, Shahid Ali Wafa and Jolius, Gimbun and Cheng, C. K. and Said, N. (2013) Enhancement of Biodiesel Yield from High FFA Malaysian Rubber Seed Oil with Sodium Methoxide Treated Limestone. Journal of Engineering and Technology, 4 (1). pp. 123-132. ISSN 2180-3811

Muhammad , Ali (2013) Case study: congestion at traffic signal of junction Jalan Bukit Ubi and Jalan Dato Lim Hoe Lek. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad 'Afif, Mohamed Azmi (2013) A wavelet analysis for crack location detection on cantilever beam. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad 'Azri, Mohd Razi (2013) Development of padded bandana for takraw players. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Adlin, Hasmar (2013) Analysis and design of an open channel flow flume : reservoir section. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Afiq, Azmi (2013) Football league for mobile using android application technology. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Muhammad Aifa , Mohamad Suhaimi (2013) Study on the alkaline activation of palm oil fuel ash in fly ash based geopolymer concrete containing oil palm shell. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Aizuddin , Ramly (2013) The sorption of organic compound in soils. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Akmal, Jamaludin (2013) Development of two wheels space-frame plug-in hybrid electric motorcycle chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Akmal , Yaakob (2013) Proposing demand meet capacity waiting area for passenger at station Star LRT Masjid Jamek Kuala Lumpur. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Alif Hafiz, Abd Murad (2013) Burst pressure prediction of collinear crack in steel pipeline. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Aminuddin, Adnan (2013) Effect of corrosion on printed circuit board. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Amir Akmal, Ahamad Khalid (2013) Fabrication of hybrid electric chopper tyre motorcycle front suspension. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Amir Sufi , Shukri (2013) Flexural behaviour of reinforcement beam using slab deck permanent formwork. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Amirul, Zainal Abidin (2013) The role of information and communications technology (ICT) in supply chain management (SCM) in distributor perspective - a study of distributor company of automotive parts in Klang area. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Asyraf, Jusoh (2013) A study on production of emulsified biodiesel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Azli, Shukri (2013) 'Islam in Pahang' named as the best original work. Quest, 9 (5). p. 6. ISSN 1985-8159

Muhammad Azli, Shukri (2013) Kuala Lumpur International Book Fest: UMP Publisher among the 10 best university publishers. Quest, 9 (5). pp. 15-16. ISSN 1985-8159

Muhammad Azli, Shukri (2013) Penerbit UMP antara 10 penerbit universiti terbaik di PBAKL 2013. CREATE . p. 32. ISSN 1823-7487

Muhammad Azli, Shukri (2013) UMP Vice Chancellor won National Book Award 2013. Quest, 10 (6). pp. 1-3. ISSN 1985-8159

Muhammad Azrin, Ahmad and Nor Haniza, Sarmin and Heng, Fong Wan and Yuhani, Yusof (2013) An Extension of First Order Limit Language. In: Proceedings of the 3rd International Conference on Mathematical Sciences, 17-19 December 2013 , Kuala Lumpur. pp. 627-631..

Muhammad Azrul Faiz , Nor Adzmi (2013) Genetic algorithm to optimize routing problem modelled as the travelling salesman problem. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Badrul, Ishak Mustafa (2013) Design and fabricated pump trolley. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Faez Helmie, Mohd Suhaimi (2013) Effect of hydrogen adsorption to the high strength steel in soil aqueous environment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Fais, Haron (2013) Kinetic modeling of transesterification of refined palm oil to produce biodiesel using Strontium Oxide(SrO)as a heterogeneous catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Fakhrul, Hashim (2013) Toughness investigation on ferrous-nonferrous weld metal joint (galvanized iron-aluminium alloy). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Fakhrur-Razi, Abd Rahim (2013) Biomechanical analysis of weightlifting. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Farhan, Adnan (2013) The effect of temperature on polymethyl methacrylate acrylic (PMMA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Firdaus, Ab Moin (2013) Effect of corrosion on aluminium tailor welded blanks (similar material welding). Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Firdaus, Ismail (2013) The level of service quality for the public transport : a study of Rapid Kuantan in Kuantan routes. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Fitri, Mohamed Hassan (2013) Blade design for windmill generator. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Fuad Fikri, Amir (2013) Effect of different additives on the production of bacterial cellulose from pineapple waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Hafiz, Muhamad Hendri (2013) Real time server alert system using port scanning and reachability test functions. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Muhammad Hafiz Aswad, Ahmad Kamal (2013) Review session for 2013's pre-commercialisation grant. Quest, 10 (6). p. 7. ISSN 1985-8159

Muhammad Hafiz Aswad, Ahmad Kamal (2013) UMP signed MoU with New Advanced Technology Sdn.Bhd. (NATECH). Quest, 10 (6). pp. 8-9. ISSN 1985-8159

Muhammad Hafizuddin , Ismail (2013) Parametric investigation on the aerodynamic characteristic of NACA2415 airfoil at low reynolds number. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Haikal, Abdullah (2013) Development of rough grinding equipment for raw biomass resource. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Halifi, Muhamad (2013) Design of MIDI decoder and controller program for MIDI auto saxophone. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Hamizan, Khalid (2013) Quality improvement for manufacturing process by using 7 QC tools in SME. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Hariz, Muhammad (2013) Supply chain decision making using Analytical Hierarchy Process (AHP) : a pharmaceutical industry case study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Hariz, Mohamed Idris (2013) Effects of by-products as cement replacement materials towards concrete carbonation depth. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Hasbi, Abd Halid (2013) A study on the performance of local exhaust ventilation system using Mahalanobis approach. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Idzwan, Latif (2013) Design and development of mould calculation software. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Ikram, Mohd Rashid and Aim Izzuddin Hakimi, Mohamad Bekri (2013) Development of Low Power LED Driver Using LTSpice Software. In: 2nd International Conference on Electrical, Control and Computer Engineering (InECCE2013), 27-28 August 2013 , M.S Garden Hotel Kuantan, Pahang. pp. 1-7.. (Unpublished)

Muhammad Ikram, Mohd Rashid and Suliana, Abd Ghani and Mohamad Fakhrudin, Sulaiman Mustahim (2013) Development of High Power LED Driver Using LTSpice Software. In: 2013 IEEE 7th International Power Engineering and Optimization Conference, 3-4 Jun 2013 , Bayview Hotel, Langkawi. . (Unpublished)

Muhammad Iqbal, Ghazali (2013) Investigation of evacuated direct flow tube solar collector using different types of solar relfector with water-bases nanofluid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Iqbal Jafar, Jafar (2013) Development of shaker ( mechanical ). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Izhar, Ishak (2013) Research on skid control system of small electric vehicle : (the effect of regenerative brake control on in-wheel small electric vehicle with anti-lock brake system). Masters thesis, Tokai University.

Muhammad Izzuddin, Jaafar (2013) Fuzzy speed controller for DC motor drives. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Muhammad Kamal, Jamali (2013) Study the Effect of Oxygen to Methane Ratio on the Temperature of Partial Oxidation Unit at Direct Reduction Plant by Using CFD. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Khairul Anuar , Mohamed (2013) Mathematical modeling for the convection boundary layer flow in a viscous fluid with newtonian heating and convective boundary conditions. Masters thesis, Universiti Malaysia Pahang.

Muhammad Khairul Haziq, Muhd Fuzi (2013) The impact of branchless banking to business performance: case study at BSN. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Maghribi, Selamat (2013) Design and fabrication two degree of freedom free vibration translation motion test rig. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Nabil, Abdul Razak (2013) Investigation on the steel preheating effects on the aluminium-steel welding. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Nadzir, Nordin (2013) Innovation and development of a high pressure water nozzle discharged with curtain spray for oil leakage in offshore. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Naqeeb, Meor Ruslan (2013) Fabrication of automative body part using carbon fiber. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Noor Azreen, Mohd Khairu (2013) Study on Continuous Adsorption Process for Monoethanolamine (MEA) Wastewater Treatment Using Granular Activated Carbon and Sugarcane Bagasse. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Nor Asnizan, Nawawi (2013) Dynamics simulation of Vinyl Chloride Monomer (VCM) reactor using aspen hysys. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Nor Ridzuan, M. Taifor (2013) Development of emulsion fuel mixer system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Norazan , Abu Hassan (2013) Fatty acid of moringa oleifera oil at different sample condition. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Norkhuzairi, Shaharin (2013) Analysis of the water flow in rectangular open channel flume with rectangular sharp crested weir. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Nubli, Abdul Wahab and Noraziah, Ahmad and Muhd Azrulnizam, Suna Abdullaha and Herawan, Tutut and Ho, Cheong Lee (2013) Development of Integrated GreenVec Biofeedback Game with Galvanic Skin Response Sensor. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS - 2013), 20-22 Ogos , Universiti Malaysia Pahang. pp. 1-13.. (Unpublished)

Muhammad Nubli, Abdul Wahab and Salam, Urme (2013) The Effects of Islamic Spiritual Activities on Psycho-physiological Performance. Journal of Educational, Health and Community Psychology, 2 (2). pp. 1-12. ISSN 2088-3129

Muhammad Nubli, Abdul Wahab and Wan, Rusyaini (2013) Measuring Persistence in Youth Competencies Development Using Heart Rate Variability (HRV). In: International Conference on Youth 2013 (ICYOUTH 2013), 29 – 31 October 2013 , Mines Wellness Hotel, Sri Kembangan, Selangor Malaysia. pp. 351-361.. ISSN 978-967-10933-2-0

Muhammad Nubli, Abdul Wahab (2013) Pendidikan hati lahir masyarakat sejahtera. Berita Harian, (17 Ju . pp. 30-31.

Muhammad Nubli, Abdul Wahab (2013) Pendidikan hati lahir masyarakat sejahtera. Berita Harian .

Muhammad Nur Alif, Azman (2013) Flexural behaviour of reinforced concrete with rectangular hollow section. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Nur Ilyas , Amran Noor (2013) A case study on comparison between wood truss and steel truss for roof structure. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Rafiq, Muhammad Amin (2013) Design of transformerless inverter using H-Bridge Mosfet as a switching device. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Muhammad Redho, Mardzuki (2013) Project crashing in construction industry: investigation of the strategies, challenges and impacts. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Ridzuan, Mamat (2013) Utilizing multiple linear regression technique for interential measure of continuous-based process monitoring. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Safwan, Said (2013) Muktabaah amal by using mobile application. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Muhammad Sarkawi, Rosalam (2013) Medical adaptive web based tutoring: audiology. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Muhammad Shahir, Nazir (2013) The application of adhesive bonding for different types of material for car body parts. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Shahiruddin, Alias (2013) Design and development of 3D foot scanning rig. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Shahrul, Sabri (2013) Numerical and experimental analysis of wake effect on tidal current turbine. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Shukran, Zaini (2013) Mechanical and electrical support for MIDI auto saxophone. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Suhaimi, Man (2013) Production of Bio-Oil from Empty Fruitbunch (EFB) via Pyrolysis Process. Masters thesis, Universiti Malaysia Pahang.

Muhammad Syafiq, Abd Rahman (2013) Nanobeads formation for anticancer drug release controlled by electrospinning. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq, Aziz (2013) Thermodynamic simulation of biogas composition in agricultural waste gasification. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq, Aziz (2013) Thermodynamic simulation of biogas composition in agricultural waste gasification. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq , Mansoruddin (2013) Effect of pine fiber on concrete compressive and flexural strength. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Syamim , Hisham (2013) Macroscopic study of waste management by domestic consumer. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Syauqi, Shaidan (2013) Development of edm tool for producing titanium alloy automotive valve application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Yunus, Zainal Abidin (2013) Stability of papain in aqueous organic solvent by reverse phase liquid chromatography. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Zaid, Nor Azlan (2013) Analysis on the performances of a micro gas turbine cogeneration system in sewage treatment plants. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zakiran, Abd Aziz (2013) Identification of kinematic hardening parameters for mild steel by cyclic loading. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Zulfahmi Toh, Abdullah and Abbas Saliimi, Lokman and Ku Saimah, Ku Ibrahim (2013) Component Testing for VsImaging Library Using Pixel Comparison Technique. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS - 2013), 20-22 August 2013 , Universiti Malaysia Pahang. pp. 1-8.. (Unpublished)

Muhammad Zulhilmi, Zakaria (2013) Vibration control of single link flexible manipulator by using neural network. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad ‘Imran, Zainal Abdin (2013) Fluid flow analysis of gas flow in oil and gas pipeline. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mupit, Datusahlan and Wan Faizal, Wan Ishak and Makky, Essam A. (2013) Biodegradation of Wastewater Oil Pollutants, Identification and Characterization: A Case Study – Galing River, Kuantan Pahang, Malaysia. International Journal of Bioscience, Biochemistry and Bioinformatics, 3 (6). pp. 579-582. ISSN 2010-3638

Murat, Balcı and Ömer, Gündoğdu (2013) Determination of Physical Properties of Laminated Composite Beam Via the Method of Inverse Vibration Problem. Journal of Mechanical Engineering and Sciences (JMES) , 5 . pp. 611-622. ISSN 2289-4659 (print); 2231-8380 (online)

Mustika Yasti, Yasril (2013) Development of plug in drive train system for hybrid electric motorcycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muzamir, Hasan (2013) Strength and compressibility of soft soil reinforced with bottom ash columns. PhD thesis, Universiti Malaysia Pahang.

Muzammil, Mohamad Alias (2013) Study of spray breakup and mixture in a gasoline direct injection engine by using simulation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

N

N., Masngut (2013) A study of butanol production in a batch oscillatory baffled bioreactor. PhD thesis, Newcastle University.

N. A., Jalanni and M. N., Abu Seman and C. K. M., Faizal (2013) Investigation of New Polyester Nanofiltration (NF) Membrane Fouling with Humic Acid Solution. Jurnal Teknologi (Sciences and Engineering), 65 (4). pp. 69-72. ISSN 0127-9696 (print); 2180-3722 (online)

N. H., Mohammad Abdul Aziz and N., Harun and H., Kamal and Nor Rul Hasma, Abdullah and L. N., Mohamad (2013) Allocation and Sizing of Distributed Generation (DG) using EP, AIS and PSO. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

N. M., Fadhillahanafi and K. Y., Leong and M. S., Risby (2013) Stability and Thermal Conductivity Characteristic of Carbon Nanotube Based Nanofluids. International Journal of Automotive and Mechanical Engineering (IJAME), 8 . pp. 1376-1405. ISSN 1985-9325(Print); 2180-1606 (Online)

N. M. M., Ammar and Ahmad Alif, Ahmad Adam and Nurul Suraya, Azahari (2013) Predicting Errosion Pattern on Archimedes Screw Runner Blade of Hydro Power. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

N. M. M., Ammar and Nasir, Ali and M. S., Idris and A. N., Oumer (2013) Numerical and Qualitative Analysis of a Single Particle Behavior in a Shear Driven Flow in Equilateral Triangular Cavity. Applied Mechanics and Materials, 465-46 . pp. 557-561. ISSN 1662-7482

N. S., Nasri and Siti Noraishah, Ismail and U. D., Hamza and M. M., Hamed (2013) Study on the Use and Modification of a Sustainable Solid Waste Material for Carbon Dioxide Capturing. In: Proceedings of the 6th International Conference on Process Systems Engineering (PSE ASIA), Kuala Lumpur , 25-27 June 2013. pp. 555-571..

N. S., Nasri and U. D., Hamza and A., Abdulkadir and Siti Noraishah, Ismail and M. M., Hamed (2013) Utilization of Sustainable Palm Empty Fruit Bunch Sorbents for Carbon dioxide Capture. In: Proceedings of the 6th International Conference on Process Systems Engineering (PSE ASIA), Kuala Lumpur , 25-27 June 2013. pp. 582-587..

N. S., Zainuddin and A. A. H., Khalid and M. R. A., Karim (2013) Water Loss and Flow Characteristics of Uitm Shah Alam Water Supply System through Hydraulic Simulations. In: 3rd Malaysian Postgraduate Conference (MPC2013), 4-5 July 2013 , Sydney, New South Wales, Australia. pp. 291-302..

N.A., Che Azhar and M.A., Mansor (2013) Development of Plant Maintenance Management System (PMMS): a Case Study. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-5..

Nabil Fikri, Zuiful Zubri (2013) Design and analysis of the support structure for an open channel flume. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nabila Hakim, Mohamad Asri (2013) Production of methane gas by Ultrasonic Membrane Anaerobic System (UMAS) using sewage sludge as substrate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nadarajan, Ramanan (2013) Title production and characterization of plastic from marine algae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nadiatul Adilah, Ahmad Abdul Ghani and Norasman, Othman and Mohd Khairun Hafiz, Baharudin (2013) Study on Characteristics of Sediment and Sedimentation Rate at Sungai Lembing, Kuantan, Pahang. Procedia Engineering, 53 . pp. 81-92. ISSN 1877-7058

Nadiatul Adilah , Ahmad Abdul Ghani and Fatin Adnin, Mohamad Prim Nasir (2013) Preliminary Study on Sediment Load at Sungai Galing, Kuantan, Pahang. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Nadzirah, Sha'ari (2013) Study the Mix Culture and Wild Strain Sp. of Microalgae in Highly Concentrated Municipal Waste Water. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nahdiyyah, Rosslan (2013) Inoculum development in 2L stirred tank fermenter for production of PHB biopolymer in a 20 L stirred tank fermentation on a medium of oil palm frond juice (OPFJ). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nair, V. M. and Rajan, Jose and Raju, K. and Wariar, P. R. S. (2013) Optimization Of Citrate Complex Combustion For Synthesis Of Transition Metal Oxide Nanostructures. Journal of Alloys and Compounds, 552 . pp. 180-185. ISSN 0925-8388 (print), 1873-4669 (online)

Najib , Md Saad (2013) Mathematical model to reduce the lead time at workstations. Faculty of Industrial Management, Universiti Malaysia Pahang.

Nasihah, Mohd Nor (2013) Enzymatic extraction of stevioside from Stevia Rebaudiana leaves using cellulase. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nasihah Sakinah , Zainudin (2013) The impact of agricultural activity towards water quality in Tasik Chini. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nasir Ali, Mat Sani (2013) Study on behavior of particle flow in the lid driven cavity based on various geometries. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nasirul Muzaffar, Nasri (2013) Design and fabrication of knee pad. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nasly, Mohamed Ali and Saher, Faisal Nadeem (2013) A Visual Aided DSS Prototype Development to Mitigate the Flood Hazards. American Journal of Geographic Information System, 2 (3). pp. 37-46. ISSN 2163-1131 (print), 2163-114X (online)

Nasly, Mohamed Ali and Hossain, Mohamed Amjed and M. R., Islam and Sobahan, Md Abdus (2013) Effect of Industrial Pollution on the Spatial Variation of Surface Water Quality. American Journal of Environmental Science, 9 (2). pp. 120-129. ISSN 1553-345X

Nasly, Mohamed Ali and Hossain, Mohamed Amjed and Mir, Sujaul Islam (2013) Source Apportionment and Quality Assessment of Surface Water Using Principal Component Analysis and Multiple Linear Regression statistics. Environment Conservation Journal, 14 (3). pp. 9-16. ISSN 0972-3099 (Print), 2278-5124 (Online)

Nasly, Mohamed Ali and Hossain, Mohamed Amjed and Mir, Sujaul Islam (2013) Water Quality Index: an Indicator of Surface Water Pollution in Eastern part of Peninsular Malaysia. Research Journal of Recent Sciences, 2 (10). pp. 10-17. ISSN 2277-2502

Nasly, Mohamed Ali and Hossain, Mohammed Amjed and Mir, Sujaul Islam (2013) Water Quality Index of Sungai Tunggak : An Analytical Study. In: 3rd International Conference on Chemical, Biological and Environment Sciences (ICCEBS'2013), 8-9 January 2013 , Kuala Lumpur. pp. 40-45..

Nasrual Azuan, Alang and Nur Azhani, Abd Razak and M.R., Zulfadli (2013) The Influence of Gouge Defects on Failure Pressure of Steel Pipes. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-7.. (Unpublished)

Nasruddin , Md Jariman (2013) Effect on flexural strength of joist due to external side reinforcement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nasrul Hadi, Johari and Kahar, Osman and Mohammed Rafiq, A. Kader (2013) The Effect of Tracheal Stenosis on Airflow in the Trachea and Main Bronchi:A Numerical Modelling Analysis. Advanced Science Letters, 19 (10). pp. 3041-3046. ISSN 1936-6612

Nasyrah Fahada, Abdul Razak (2013) The impact of multilayer subcontracting system in construction industry in Pahang. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Nazar Syafiq, Nazri (2013) Linked up web apps and web services. Faculty Of Computer System And Software Engineering, Universiti Malaysia Pahang.

Nazarudin , Shahari (2013) Lonjak kebolehpasaran siswazah. Utusan Malaysia .

Nazirul Azim, Mohd Asri (2013) A study of vibration features for rotating specimenunder cyclic loading. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Neena Kaylisia, Brum (2013) Study of geometric effect to the crevice corrosion behaviour in stainless steel. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ng, Choon-Ching and Siau-Chuin, Liew and Wan Muhammad Syahrir, Wan Hussin and Tutut, Herawan (2013) Identifying the Dominant Language of Web Page Using Supervised N-grams. 2012 International Conference on Advanced Computer Science Applications and Technologies . pp. 344-348.

Ng, Jun Pin (2013) A study of the strain signals behaviour. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ng, Kim Hoong (2013) Photo-treatment of palm oil mills effluent (pome) over cu/tio2 photocatalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ng, Kok Hwang (2013) Identicifation of isotropic hardening parameters for stainless steel sheet by cyclic loading tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ng, Wei Keong (2013) Lubricant ester synthesis from rubber seeds waste using cockle shells as solid catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ng, Yew Keong (2013) Numerical analysis on failure pressure of pipelines with multi-corroded region. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ng, Yew Keong (2013) Numerical analysis on failure pressure of pipelines with multi-corroded region. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ng Kah, Yee (2013) Eco-audit in e-learning implementation of FSKKP. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Ng Wei, Yee (2013) Effect of Sawdust Species and Particle Size on Glucose Production. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Ngien, S. K. and Pian, Ng Sook (2013) An Evaluation of the Design Criterion For Sewerage Peak Flow Factor At Segi University Hostel. SEGi Review, 6 . pp. 65-71. ISSN 1985-5672

Ngoh, Rui Yong (2013) Identification of mixed hardening parameters for aluminium sheet by cyclic loading tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nguang, Suok Ling (2013) Potential application of papain enzyme from papaya leaves in making antibacteria and antifungal handwash and hand sanitizer. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nik Fatima, Nek Kamarzaman (2013) Ultrasonic extraction of Clinacanthus nutans and its antioxidant activity. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nik Muhamad Firdaus, Nik Salahuddin (2013) Modal analysis on cnc milling cutting tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Muhd Hazwan , Nik Abd Aziz (2013) Experimental study on process parameter to reduce wrinkling in sheet metal forming. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nik Nadia Farhana, Nik Zulkifli (2013) Laser surface modification of AISI 1025 steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Nor Aziati, Abd Aziz (2013) Optimization of pre-treatment process of glycerol residue for succinic acid production. Masters thesis, Universiti Malaysia Pahang.

Nik Nor Hasliza , Bekhari (2013) The effect of sawdust on shear strength properties of peat soil. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nik Nurul Ain, Nik Suki (2013) Age invariant face recogntion system using automated voronoi diagram segmentation. Masters thesis, Universiti Teknologi Malaysia.

Nik Rosli, Abdullah and R., Mamat and Wyszynski, Miroslaw L. and Tsolakis, Anthanasios and Xu, Hongming (2013) Effects of Pilot Injection Timing and EGR on a Modern V6 Common Rail Direct Injection Diesel Engine. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online)

Nik Siti Aishah, Nik Li (2013) The effectiveness of road calming devices in reducing vehicle speed. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nik Sukry, Ramli (2013) UMP jayakan misi bantu umat Islam Kemboja. Berita Harian .

Nina Farhana, Mohd Jamaludin and N., Zainol (2013) Screening of Factors Affecting Pre-Treatment by Ammonia-N Removal From Poultry Manure Wastewater by Using Soil Water to Improve Biogas Production. In: 27th Regional Conference on Solid State Science & Technology ( RCSSST27), 20-22 December 2013 , The Magellan Sutera Resort and Spa, Kota Kinabalu, Sabah. pp. 1-6..

Nisham Asmeer, Roslan (2013) Biodegradable films from poly (lactic acid) (PLA)-chitosan-polyethylene glycol (PEG) : fabrication and evaluation of mechanical properties. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nitthiyah, Jeyaratnam (2013) Optimization and Characterization of Melamine Urea Formaldehyde (MUF) Based Adhesive With Waste Rubber Powder (WRP) as Filler. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Noli Maishara, Nordin and Farrah Dieba, Rashid Ali and Sharifah Intan Safina, Syed Zubir and Roslan, Sadjirin (2013) ESL Learners Reactions Towards Code Switching in Classroom Settings. Procedia Social and Behavioral Sciences, 90 . pp. 478-487. ISSN 1877-0428 (print); 1877-0428 (online)

Noli Maishara, Nordin and Sabariah, Md. Rashid and Sharifah Intan Safina, Syed Zubir and Roslan, Sadjirin (2013) Differences in Reading Strategies: How esl Learners Really Read. Procedia Social and Behavioral Sciences, 90 . pp. 468-477. ISSN 1877-0428 (print); 1877-0428 (online)

Nong Sofeah, Mohd Razif (2013) Performance analysis of speech codec (GSM, ILBC, SPEEX) for voip over wireless local area network (WLAN) with respective signal to noise-ratio (SNR). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Noor Adilah , Md Salehan (2013) Study on continuous adsorption process for Monoethanolamine (MEA) wastewater treatment using treated rice husk and sugarcane bagasse. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Amira Syuhada, Mahamad Salleh and Kamarul Hawari, Ghazali (2013) Thermal Imaging Analysis of Potentially Harmful Subject for Night Vision System. In: International Conference on Artificial Intelligence in Computer Science and ICT (AICS 2013), 25 - 26 November 2013 , Bayview Hotel, Langkawi, Malaysia. pp. 265-271..

Noor Atikah, Mohd Badruddin (2013) Zeolites catalyst from oil palm ash for petrochemical industries. Masters thesis, Universiti Malaysia Pahang.

Noor Azlinna, Abu Bakar (2013) A Comparative Study on the Carbon Products from Hydrothermal Carbonization and Torrefaction Process Using Wood Fiber Waste. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Noor Azlinna, Azizan and Wan Emril Nizar, Wan Embong (2013) The Determinants Of Work Engagement And Its Effect On Turnover Intention And Discretionary Efforts: Examining The Moderating Effect Of Organizational Culture ( A Pilot Study ). Asian Journal Of Social Sciences & Humanities, 2 (3). pp. 370-374. ISSN 2186-8484(Print); 2186-8492(Online)

Noor Azlinna, Azizan and Bahari, Mohamed (2013) The Effects of Perceived Service Quality on Patient Satisfaction at a Public Hospital in State of Pahang, Malaysia. Asian Journal Of Social Sciences & Humanities, 2 (3). pp. 307-323. ISSN 2186-8484

Noor Azuani, Suliman (2013) Influence of orifice nozzle geometry on flow and spray characteristics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Elleza Aqila, Abdullah (2013) A study on implementation of information technology (IT) and its relationship with firm performance. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Noor Elyya, Mohd (2013) The effect of sawdust on compaction properties of peat soil. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Noor Fadilah, Mohd Sabri and Syed, M. Saufi (2013) Screening of Cation Resins for the Preparation of Cation Exchanger Mixed Matrix Membranes for Copper Ion Removal. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. .

Noor Fauzani, Ayop (2013) Enzyme hydrolysis of old newspaper to produce simple sugar for fermentation process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Fiza Asiqin, Mohd Ramlan (2013) Biogas Production from Benincasa Hispida Waste. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Hana , Md Yusof (2013) Pyrolysis of agricultural waste: effect of temperature and heating rate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Hariah , Wahab (2013) Temperature effect on polymerization kinetics of poly methyl methacrylate (PMMA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Hidayatul Adawiyah, Shahizan (2013) Process capability study in electronic industry- case study on aircoil lead frame welding (HM72B-06XXX). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Noor Ida Amalina, Ahamad Nordin and Hidayah, Ariffin and Yoshito, Andou and Mohd Ali, Hassan and Yoshihito, Shirai and Haruo, Nashida and Wan Md Zin, Wan Yunus and Subbian, Karuppuchamy and Nor Azowa, Ibrahim (2013) Modification of Oil Palm Mesocarp Fiber Characteristics Using Superheated Steam Treatment. Molecules, 18 . pp. 9132-9146. ISSN 1420-3049 (print); 1420-3049 (online)

Noor Intan Shafinas, Muhammad and Jolius, Gimbun (2013) Detached Eddy Simulation (DES) of Co-Current Spray Dryer. International Journal of Technology Management, 2 . pp. 17-22. ISSN 2289-2753

Noor Sabrina, Ahmad Mutamim and Zainura, Zainon Noor and Mohd Ariff, Abu Hassan and Yuniarto, Adhi and Olsson, Gustaf (2013) Membrane Bioreactor: Applications and Limitations in Treating High Strength Industrial Wastewater. Chemical Engineering Journal, 225 . pp. 109-119. ISSN 1385-8947

Noor Shahira, Saripa (2013) Study on the effect of ultrasound on oxygen uptake rate (gas-liquid mass transfer) of saccharomyces cerevisae fermentation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Syahidah, Sabran (2013) 16th International Salon of Invention and Innovation Technologies (ARCHIMEDES). Quest, 9 (5). p. 12. ISSN 1985-8159

Noor Syahidah, Sabran (2013) 2 penyelidik raih pingat emas di ARCHIMEDES Rusia. CREATE . p. 27. ISSN 1823-7487

Noor Syahidah, Sabran (2013) Best of the best award at MTE 2013. Quest, 9 (5). p. 1. ISSN 1985-8159

Noor Syahidah, Sabran (2013) 'Cendekia Bitara Award 2012'. Quest, 9 (5). pp. 7-9. ISSN 1985-8159

Noor Syahidah, Sabran (2013) Creation, Innovation, Technology and Research Exposition (CITREx 2013), March 27-28, 2013 Universiti Malaysia Pahang (UMP) Sports Complex. Quest, 9 (5). p. 11. ISSN 1985-8159

Noor Syahidah, Sabran (2013) UMP researchers won three gold medals, three silver medals and four bronze medals at the BioMalaysia Exhibition 2013 in Persada, Johor Bharu. Quest, 10 (6). p. 10. ISSN 1985-8159

Noor Syahidah, Sabran (2013) UMP won big at ITEX 2013. Quest, 9 (5). p. 14. ISSN 1985-8159

Noor Syahidah, Sabran (2013) UMP won special platinum award and five gold medals in the British Invention Show (BIS) 2013. Quest, 10 (6). p. 3. ISSN 1985-8159

Noor Syahidah, Sabran (2013) UMP's six entries all won medals including two gold medals at Water Malaysia Exhibition and Competition 2013. Quest, 9 (5). p. 10. ISSN 1985-8159

Noor Syahidah, Sabran (2013) Ump researchers garnered a special award and gold medal, three silver medals and six bronze medals in the inventors exhibition 2013. Quest, 10 (6). pp. 4-6. ISSN 1985-8159

Noor Syahidah, Sabran and Fadhli, Suhaimi (2013) Penyelidik raih 10 pingat dan Anugerah Khas dalam Pecipta 2013. CREATE . p. 26. ISSN 1823-7487

Noor Zalika , Kornain (2013) Model and control on the ascending process of rotating wing helicopter. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Noorlisa, Harun and Douglas, P. L. and Croiset, E. and Sandoval, L. A. (2013) Dynamic Simulation and Control of MEA Absorption Process for CO2 Capture from Power Plants. In: Proceedings of the 6th Conference on Process Systems Engineering (PSE ASIA 2013), 25-27 June 2013 , Putra World Trade Centre (PWTC), Kuala Lumpur. pp. 1-6.. (Unpublished)

Noornaziha, Mohd Lazim (2013) Development of experimental bench for characterization of frictional properties of contact lens. Masters thesis, Universität zu Lübeck.

Noorul Ahlami, Kamarul Zaman (2013) Efficient Stock Control Management System. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Noorul Farina, Arifin (2013) Repository Form (UMP-IR). Unit Pengurusan Ilmu, Perpustakaan Universiti Malaysia Pahang.

Nor Ain, Binti Musa (2013) A study on muslim consumers’ awareness on JAKIM halal logo. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nor Akmal , Halim (2013) Finite element analysis on human knee. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Ashikin, Ahmad (2013) Pupuk minat pelajar sekolah dalam manfaatkan pusat sumber dan perpustakaan. CREATE . p. 56. ISSN 1823-7487

Nor Ashikin , Abdul Hamid (2013) Natural dye products business plan. Masters thesis, Universiti Malaysia Pahang.

Nor Asyikin, Basharuddin (2013) UMP rangkul 13 pingat, 2 anugerah di MTE 2013. CREATE . p. 29. ISSN 1823-7487

Nor Azazi, Mamat (2013) Perancangan rapi bantu Malaysia ungguli AUG. Berita Harian .

Nor Azimah , Mohd Nor'aini (2013) Effect of different type of soil in efficiency of thermal reduction in earth air heat exchanger (EAHE). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nor Azura, Abdul Jalil and Norul Awatif, Romli (2013) Aku dah jadi siswa! Metro .

Nor Emma Erwina, Wahab and C. K. M., Faizal (2013) Enhancement of Gas Separation performance of Carbon Nanotubes Mixed Matrix Membranes with Acid and Alkali Treatment. In: Conference on Membrane Science and Technology, 27-28 August 2013 , Hotel MS Garden,Kuantan. pp. 1-7.. (Unpublished)

Nor Fillianie, Aziz (2013) A study on service quality in relations towards customer satisfaction among express bus customer in Kuantan /. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Nor Hafipah, Mohamed Dasuki (2013) Development of maintenance record database using GIS technique: a case study bridge Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nor Hafriz, Abd Halil (2013) Two dimensional particle flow inside driven trapezoid applying eularian-lagrangian approach. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nor Hanimah, Hamidi (2013) Enzymatic depolymerazation of lignin by laccases. PhD thesis, University of Nottingham.

Nor Hanis , Ahmad Nazri (2013) Altitude meaurement and calibration on miling operation. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nor Hazwani Syuhada, Azmi (2013) Adsorption Study of Fructosyltransferase Immobilization By Using Various Adsorbent. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Ilma, Mustafa Kamal (2013) When should an investor choose utility innovation over patent. Quest, 9 (5). p. 3. ISSN 1985-8159

Nor Nabilah, Che Mansor (2013) Fluid structural interface analysis of force excitation on straight pipeline. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nor Rul Hasma, Abdullah and Ismail, Musirin and Muhammad Murtadha, Othman (2013) Operating Generator Selection Applied for Reactive Power Dispatched Using Evolutionary Programming Technique. In: Power Engineering and Optimization Conference (PEOCO), 3-4 June 2013 , Langkawi. pp. 583-587..

Nor Rul Hasma, Abdullah and I., Musirin (2013) Optimal Reactive Power Dispatch for Voltage Stability Improvement Considering Line Contingencies using PSO. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Nor Saiyidah, Abd Ghani (2013) Characterization of palm oil fuel ash (POFA) and fly ash blend in geopolymerization process. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nor Salwani, Ismail (2013) Study on wax deposition of heavy crude oil in pipeline transportation by using oil in water emulsion method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Shafiqah, Mohd Nasir (2013) Development of membrane anaerobic system (MAS) for palm oil mill effluent (POME) treatment. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Nor Syazwani, Hamsan (2013) Design and development of tire nut removal. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nor Zawani, Zainuddin (2013) Studying the delignification of wood fibers using laccase enzymes. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noradlinnaini, Muhamad (2013) Study on the Adsorption Process of Monoethanolamine (MEA) Wastewater Using Activated Carbon and Treated Rice Husk. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norafitah, Mahidin (2013) A study on the solid waste composition and solid waste generation rate in commercial area of Taman Sri Gading, Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Norain, Chin (2013) Heat transfer measurement through building glass material. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Noraini, Ibrahim (2013) Performance of vertical subsurface flow constructed wetland with limestone filter for leachate treatment. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Noraini , Mat Daud (2013) Development of edge finder. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Norani, Mohammad Zaki (2013) Performance analysis of 8kbps voice codec (G.729, G.711 ALAW, G.711 ULAW) for voip over wireless local area network with respective signal-to-noise ratio NOISE RATIO. FACULTY OF COMPUTER SYSTEM AND SOFTWARE ENGINEERING , Universiti Malaysia Pahang.

Noraniza, Samat (2013) FSKKP anjur Persidangan ICSECS 2013 kali ke-3. CREATE . p. 14. ISSN 1823-7487

Norashikin, Nor Tuah (2013) Modeling analysis on blood flow into the main artery around knee joint of human leg during sports activities. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Noraziah, Abu Yazid and Theng, C. C (2013) Production of Food Grade Thickener from Benincasa Hispida. In: 4th International Conference on Biotechnology and Food Science/Journal of Bioscience,Biochemistry and Bioinformative, 21 - 22 April 2013 , Jinma Hotel, Beijing China. pp. 1-5.. (Unpublished)

Noraziah, Ahmad and A. N., Abdalla and Beg, Abul Hashem (2013) Managing Heterogeneous Database Replication Using Persistence Layer Synchronous Replication (PLSR). Wulfenia Journal, 20 (2). pp. 221-239. ISSN 1561-882X

Noraziah, Ahmad and Abdulla Fairuzullah, Ahmad Tajuddin and Ainul Azila, Che Fauzi and Nurzety, Aqtar and Azlina, Zainuddin and Herawan, Tutut (2013) Fault Tolerance On Binary Vote Assignment Cloud Quorum (BVACQ) Replication Technique. In: Proceeding of t he 2013 International Conference on Computer Science and Information Technology (CSIT 2013), 16-18 June 2013 , Jogjakarta, Indonesia. pp. 1-6..

Noraziah, Ahmad and Ainul Azila, Che Fauzi and Fairuzullah, A. and Nurzety Aqtar, Ahmad Azuan and Azlina, Zainuddin (2013) Fault Tolerence on Binary Vote Assignment Cloud Quorum (BVACQ) Replication Technique. In: Proceeding of the 2013 International Conference on Computer Science and Information Technology (CSIT-2013), 16-18 June 2013 , Yogyakarta, Indonesia. pp. 2-6..

Norazila, Md Tahar (2013) Molecular recognition of carbamazepine polymorph. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norazlina, Rusli (2013) To study the relationship between bank layout and customer satisfaction. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Norazlinda, Hanen (2013) Colour removal of raw carrageenan by using sodium hypochlorite as bleaching agent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noraznafulsima, Khamshah (2013) Fuzzy temperature compensation scheme for hot wire mass airflow sensor. Masters thesis, Universiti Malaysia Pahang.

Norazrin , Sarju @ Hj Mohd Nor (2013) Evaluation of the design of national car’s seat belt for comfort of pregnant women or big size driver. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Norehan, Saleh (2013) Masum: 145 atlet UMP berentap. Utusan Malaysia .

Norehan, Saleh (2013) Misi kemanusiaan UMP di Kemboja. Utusan Malaysia .

Norehan , Saleh (2013) Pelajar luar negara gamatkan suasana raya. Utusan Malaysia .

Norfarahanim, Muhamad@Ramli (2013) Effects of carburization process on the mechanical properties of carburized mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norfatin Sahira, Saidi (2013) Physical Characterization on Hydrothermal Carbonization and Torrefaction Product from Wood Fibre Waste. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norhafizah, Md Sarif and Mohd Zuki, Salleh and Razman, Mat Tahar and Roslinda, Nazar (2013) Free Convection Boundary Layer Flow of a Horizontal Circular Cylinder in a Micropolar Fluid with Convective Boundary Conditions. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Norhafizah, Md Sarif and Mohd Zuki, Salleh and Razman, Mat Tahar and Roslinda, Nazar (2013) Numerical Solution of The Free Convection Boundry Layer Flow Over a Horizontal Circular Cylinder With Convective Boundry Conditions. In: The 3rd International Conference on Mathematical Science (ICMS3), 17-19 December 2013 , Putra Word Trade Center (PWTC) Kuala Lumpur. pp. 1-4.. (Unpublished)

Norhafizah, Md Sarif and Mohd Zuki, Salleh and Roslinda, Nazar (2013) Boundary Layer Flow and Heat Transfer over a Stretching Sheet with Convective Boundary Conditions. AIP Conference Proceeding, 1522 (1). pp. 420-425.

Norhafizah, Md Sarif and Mohd Zuki, Salleh and Roslinda, Nazar (2013) Numerical Solution of Flow and Heat Transfer over a Stretching Sheet with Newtonian Heating using the Keller Box Method. Procedia Engineering, 53 . pp. 542-554. ISSN 1877-7058

Norhafizuddin, Husein @ Yusof (2013) The Study of Multiphase Flow for Petroleum Production Using Computational Fluid Dynamics (CFD). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norhaida, Ab. Razak and Nasrul Azuan, Alang and M. A, Murad (2013) Burst Pressure Prediction of Multiple Cracks in Pipelines. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Norhashima, Mokhtar (2013) Process Monitoring of CO2 Absorption in Diethanolamine Using Fourier Transform Infrared Spectroscopy (FTIR). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norhasnida , Hasanuddin (2013) Adaptive medical courseware system for medical student. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Norhayantie, A.Rahman (2013) Total phenolic content and antioxidant activity of some Malaysian herbs. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norhayati, Rosli and Arifah, Bahar and Hoe, Yeak Su and Haliza, Abdul Rahman (2013) Stochastic Taylor Methods for Stochastic Delay Differential Equations. MATEMATIKA, 29 (1c). pp. 241-251. ISSN 0127-8274

Norhayati, Rosli and Arifah, Bahar and S. H., Yeak and X., Mao (2013) A Systematic Derivation of Stochastic Taylor Methods for Stochastic Delay Differential Equations. Bulletin of the Malaysian Mathematical Sciences Society, 36 (3). pp. 555-576. ISSN 0126-6705 (Print); 2180-4206 (Online)

Norhayati, Rosli and Arifah, Bahar and Yuhani, Yusof and Nadirah, Mohd Nasir and Madihah, Md Salleh and Mohd Zuki, Salleh (2013) Stochastic Modelling of Solvent Production by C Acetobutylicum P262 in Fermentation Process. In: Creation, Innovation, Technology & Research Exposition (CITReX 2013), 27-28 May 2013 , Universiti Malaysia Pahang. .

Norhidayah, Muhammad and Jasni, Mohamad Zain and Md Yazid, Mohd Saman (2013) Loop-based RSA Key Generation Algorithm using String Identity. In: 13th International Conference on Control, Automation and Systems (ICCAS 2013), 20-23 October 2013 , Kimdaejung Convention Center, Gwangju, Korea. pp. 255-258.. ISSN 2093-7121

Norhidayah, Abdull and Kuang, Lee Chia and M. K., Azhar and S., Nurulwahida (2013) Indoor Air Quality and Sick Building Syndrome in Three Selected Buildings. Procedia Engineering, 53 . pp. 93-98. ISSN 1877-7058

Norhumaira, Juhai (2013) The relationship between factor of motivation and employee performance : the study of manufacturing industry in my sutera sdn.bhd pengkalan chepa, Kelantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Noriha, Abdullah (2013) The performance use waste glass in concrete tile. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Norita, Abu Kori (2013) Determination of explosion parameters of hydrogen-air mixtures in closed vessel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norizam, Sulaiman and Sri Nor Hafidah, Mohammad Jalani and Mahfuzah, Mustafa and Kamarul Hawari, Ghazali (2013) Development of Automatic Vehicle Plate Detection System. In: IEEE 3rd International Conference on System Engineering and Technology (ICSET 2013), 19-20 August 2013 , Shah Alam. pp. 130-135..

Norlida, Jamil and A. R., Yusoff and Muhammad Hatifi, Mansor (2013) Experimental Study of the Static Modal Analysis on Milling Machine Tool. In: International Manufacturing Engineering Conference (IMEC 2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-6.. (Unpublished)

Norliza Zafira, Razali (2013) An analysis on reducing defect rate in moulding process of phone casing. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Noroozi, Siamak and Abdul Ghaffar, Abdul Rahman and Vinney, John and Ong, Zhi Chao and Khoo, Shin Yee (2013) Simulation of Performance Enhancement of Bi-Lateral Lower-Limb Amputees Through Impulse Synchronisation with Self Selected Running Step Frequency. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-13.. (Unpublished)

Norrozila, Sulaiman and Ng, Liang Shen and M. A., Ameedeen (2013) Network Security Encryption Techniques for Reliablility Data Transmission on Password System. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS - 2013), 20-22 August 2013 , Universiti Malaysia Pahang. pp. 1-5.. (Unpublished)

Norzaini, Abd. Rahim (2013) Physicochemical characterization of Ni-Al2O3 and La-promoted Ni-Al2O3 catalyst for methane dry reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norzamirah , Kamaruzaman (2013) Design and development of storage management system at FKP. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nour, A. H. and Azhari, H. Nour (2013) Performance of Ultrasonic Membrane Anaerobic System (UMAS) in Membrane Fouling Control. International Journal of Engineering Science and Innovative Technology (IJESIT), 2 (6). pp. 480-491. ISSN 2319-5967

Nour, A. H. and Ranitha, Mathialagan and Azhari, H. Nour and Ahmad Ziad, Sulaiman (2013) Extraction and Characterization of Essential Oil From Lemongrass (Cymbopogon Citratus) by Microwave-Assisted Hydrodistillation. In: Proceedings of International Conference on Enviromental Protection and Renewable Energy, 6-10 September 2013 , Pattaya, Thailand. pp. 175-161..

Nugroho, Dewayanto and Ruzinah, Isha and Mohd Ridzuan, Nordin (2013) Catalytic Pyrolysis of Palm Oil Decanter Cake using CaO and γ-Al2O3 in Vacuum Fixed Bed Reactor to Produce Bio-oil. In: International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2013), 28-29 August 2013 , Kuantan, Pahang. pp. 1-8..

Nur, Cholis (2013) Electro-mechanical single acting pulley rubber V-belt continuously variable transmission (EMSAP RVB-CVT) for scooter. Masters thesis, Universiti Malaysia Pahang.

Nur Adilah, Ahmad (2013) Development of thermal barrier coating on tool steel surface. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nur Afeefa, Mohd Khairi (2013) Antioxidant Activity of Cosmos Caudatus Extracts By Using Different Types of Extraction Methods. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Afifah, Hassan (2013) Enhancement of PCA-based fault detection system through utilising dissimilarity matrix for continuous-based process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Afifah, Hassan (2013) Enhancement of PCA-based fault detection system through utilising dissimilarity matrix for continuous-based process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Afiqah , Noor Azman (2013) Optimize flow layout and analysis of effectiveness at bi technologies Corporation Sdn. Bhd. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Nur Aida, Zakiriah (2013) Solid phase transformation of Carbamazepine-Saccharin (CBZ-SAC) co-crystal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Ain , Hasan (2013) The effect of wet coconut fibre on concrete properties (compressive strength and flexural strength). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Ain Amelia, Sathari (2013) The effects of single-pass/double-pass technique on friction stir welding of aluminium. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nur Ain Farhana, Ghani (2013) The use of seawater as a source of magnesium chloride in magnesium ammonium phosphate (MAP)treatment method. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Ain Izzati, Zainudin (2013) Grain and size effect: a review on their influence in micro-manufacturing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Akmalina, Azeman (2013) Production of abe (acetone-butanol-ethanol) from pome by clostridium beijerinckii. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Amirah , Roslan (2013) Managing change resistance among employees. Faculty of Industrial Management, Universiti Malaysia Pahang.

Nur Amirra, Rashid (2013) Dry machining and minimum quantity lubricant of aluminum alloy 6061-t6 using coated carbide tools. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nur Aqilah, Othman and Hamzah, Ahmad (2013) The Effect of Intermittent Measurement in Simultaneous Localization and Mapping. In: Control System, Computing and Engineering (ICCSCE), 29 Nov - 1 Dec 2013 , Mindeb. pp. 152-156..

Nur Aqilah, Othman and Hamzah, Ahmad and Saifudin, Razali (2013) Analysis of Intermittent Measurement for KF-based SLAM. In: International Conference on Electrical, Control and Computer Engineering (InECCE 2013), 27-28 August 2013 , M.S Garden Hotel Kuantan, Pahang. pp. 1-5.. (Unpublished)

Nur Ashidah, Abdul Satapa (2013) Optimization of yellow pigment production by Monascus purpureus from banana peel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Asyran Wanie , Baharom (2013) Experimental assessment of stamping parameters in a non-isothermal sheet metal forming technology. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Nur Athirah Afifa, M. L. and Norhidayah, Abdull and Leman, A.M. and Paiman, N.A. (2013) Monitoring of Respirable Particulate among Workers Exposure in Paper Based Industry. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET) , 3-4 December 2013 , MS Garden Hotel Kuantan, Pahang. pp. 1-2..

Nur Atikah, Che Embee (2013) Development of Polysulfone-Polydimethylsiloxane (Psf Pdms) Thin Film Composite (Tfc) Membrane for Co2/ N2 Gas Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Nur Atiqah , Aminudin (2013) Analysis of pesticide residues in the fresh fruits by using gas chromatography with electron capture detector (GC-ECD). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Azhani, Abd Razak and Wai, Loon Ng and Juliawati, Alias (2013) Effects of Mig Welding to Corrosion Behaviour of Carbon Steel. Applied Mechanics and Materials, 315 . pp. 914-918. ISSN 1662-7482

Nur Azirah, Abdul Rahim (2013) Simulation of micro hydro power based on river configuration at river upstream. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Azleen, Abdol Mulok (2013) Effects of composite layer plate on modal experimental analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Baiti, Zahir and Rosdiyana, Samad and Mahfuzah, Mustafa (2013) Initial Experimental Results of Real-Time Variant Pose Face Detection and Tracking System. In: IEEE International Conference on Signal and Image Processing Applications (ICSIPA 2013), 8-10 October 2013 , Melaka. 264-268 .. ISSN 978-1-4799-0269-9/13

Nur Bashirah, Azli (2013) Biodegradable films from poly (lactic acid) (PLA)-chitosan-silver nanoparticles : preparation and characterization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Fahriza , Mohd Ali (2013) Biohydrogen production from palm oil mill effluent (POME) using immobilized mixed culture (SLUDGE). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Fakhriah, Mohd Noordin (2013) Lean manufacturing techniques implementation at Zest Venture Sdn Bhd. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Farahain, Khusnun (2013) Jatropha oil based bio-adhesive for plywood application. Masters thesis, Universiti Malaysia Pahang.

Nur Farahin, Ishak and Sook, Fun Pang and Noor Intan Shafinas, Muhammad and Nuraini, Mohd Yusoff and Mohd Arman, Abd Kadir and Sazwani, Suhaimi and Hafizah, Ramli and Mohd Faried, Abdullah and Zainal, Giman and Jolius, Gimbun (2013) Extraction of Antioxidant, Flavonoids and Phenolic content from N. Sativa. In: International Conference of Chemical Engineering and Industrial Biotechnology, 28-29 August 2013 , Kuantan, Pahang. pp. 1-2..

Nur Farhanim , Mustaffa (2013) Pyrolysis of agricultural waste: effect of catalyst application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Fariezah , Zaidon (2013) The effect of transmembrane pressure (TMP) towards the harvested rainwater quality. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Fariza, Talib (2013) Determination of remaining strength of corroded pipeline using closed – form solution. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Fatihah, Muhamad (2013) The effects of rice husk on the compaction properties of peat soil. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Fitrina, Mat Nawi (2013) Development of a rocket recovery system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Hafiza Iryani , Zahanapi (2013) Design and development of liquid handling device at FKP. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nur Hafizah, Hussin (2013) Demulsification of Crude Oil Emulsions via Microwave Assisted Chemicals (Environmental Friendly). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Hasmiza , Yusof (2013) Effect of pipe materials on thermal reduction in earth air heat exchanger. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Hazieqah, Kahil (2013) Modelling of hydrodynamics in Airlift reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Hazieqah, Kahil (2013) Modelling of hydrodynamics in Airlift reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Hazwani , Alias (2013) The flexural strength of polystyrene sandwich beam. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Izdihar, Ab Ghani (2013) Mobile edutainment games: road safety for kids. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Nur Liyana, Abdul Rahim (2013) Solar collector storage tank. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Liyana, Zulkifle and Nor Adila, Mhd Omar and Saiful Nizam, Tajuddin and Mohd Rosly, Shaari (2013) Antidiabetic Activities of Malaysian Agarwood (Aquilaria SPP) Leaves Extract. In: National Conference On Industry-Acamedia Initiative in Biotechnology (CIA:BIOTECH 2013), 5 - 7 December 2013 , Equatorial Cameron Highlands, Pahang. pp. 1-4.. (Unpublished)

Nur Putih Ikhram Ilani, Alias (2013) Production of xylitol by candida krusei using xylose from oil palm empty fruit bunch (opefb) as a substrate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Shafiqa, Suhaimi (2013) A linear static analysis of truss footbridge. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Syazana , Norruddin (2013) The effect of sawdust on shear strength properties of peat soil. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Syazwani, Mohd Noor (2013) Biomechanical analysis on archery athletes. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nur Syazwani , Samsudin (2013) Data filtering of 5-axis inertial measurement unit using kalman filter. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nur Zahirah, Mohd Ali (2013) Adaptive Embedded Clonal Evolutionary Programming (AECEP) for optimal Distributed Generation (DG) location and sizing in a distribution system. Masters thesis, Universiti Malaysia Pahang.

Nur'Atikah , Ab Rahman (2013) Analysis of the wind effect on the patio cover (awning) structure in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurafni , Herman (2013) Text to braille translator. Faculty Of Computer System And Software Engineering, Universiti Malaysia Pahang.

Nuraini, Aziz and S. N., Aqida (2013) Optimization of Quenching Process In Hot Press Forming of 22mnb5 Steel For High Strength Properties. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-6. ISSN 1757-8981 (Print), 1757-899X (Online)

Nuraini, Nurazaman (2013) Photocatalysis of glycerol over Pt/TiO2 catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nuraini, Mohd Yusoff and Jolius, Gimbun and M. M., Yusoff (2013) Thermal Denaturation Kinetics of Whey Protein and Maltodextrin Mixture. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer, US, pp. 151-157. ISBN 978-1-4614-6207-1, 978-1-4614-6208-8 (online)

Nuramalina Munirah, Rosli (2013) Evaluation of effectiveness parameters on gas dehydration plant. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nuratiqah, Marsidi (2013) Biological treatment of POME (high acidic content) factorial analysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurdinie, Md Baliami (2013) Formulation of wound healing product from keratin protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurernie Sabrilna , Maesman (2013) Study of labor utilization and man to machine ratio at automative component company. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurfarahin, Harun (2013) Microwave Assisted Extraction (MAE) of Castor Oil From Castor Bean. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurfarahin, Sharkawi (2013) Improvement of air quality for a passive earth air heat exchanger (EAHE). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurfaridatul Aini, Abdullah (2013) Study on the relationship between leader‘s personality and employees work satisfaction. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nurfariha, Kamaruddin (2013) Development of PVDF/PEG Thin Film Composite Membrane For CO2/N2 Gas Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurfariha Fathmi, Zakaria (2013) Application of ultrasound technique for Steviol Glycosides separation from mixtures of S.Rebaudiana stems and leaves using methanol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurfatin, Nohadin (2013) Rule based adaptive emotional solving web tutoring (AESWT) for kindergarden school on learning mathematics. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Nurhaizan, Mohd Zainudin and Fadzida, Ismail and Lee, Chia Kuang and Noor Azlinna, Azizan (2013) The Effectiveness of Global Sourcing in Malaysia: Risk Assessing in Construction Industry. International Journal of Technology Management, 2 . pp. 23-36. ISSN 2289-2753

Nurhamizah, Ahmad Zaini (2013) Formulation of Anti-Aging Cream from Keratin Protein. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Nurhamizah, Ibrahim (2013) Effects of drying methods on the antioxidant activities on Benincasa Hispida seed extracts. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurhanis Sofiah, Abd Ghafar (2013) Prototype development of normal Asian human skull. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurhassikin , Sulaiman (2013) The effect of palm oil fuel ash (POFA) as cement replacement on high performance concrete (HPC). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurizzatul Atikha, Rahmat (2013) Prediction of maximum strain and strain rate in SHPB specimens based on energy analysis. Masters thesis, Japan , Okayama University.

Nurkhalida, Shahari (2013) Investigating the Effect of Nonionic Surfactant Molecular Weight on Its Drag Reduction Performance. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurlaila, Ismail and Mohd Hezri, Fazalul Rahiman and Mod Nasir, Taib and Nor Azah, Mohd Ali and Mailina, Jamil and Saiful Nizam, Tajuddin (2013) Analysis of Chemical Compounds of Agarwood Oil based on Headspace-Solid Phase Microextraction combined with Gas Chromatography Mass-Spectrometry. In: IEEE 9th International Colloquium on Signal Processing and its Applications, 8-10 March 2013 , Kuala Lumpur. pp. 215-218..

Nurlaila, Ismail and Mohd Hezri Fazalul, Rahiman and Mohd Nasir, Taib and Nor Azah, Mohd Ali and Mailina, Jamil and Saiful Nizam, Tajuddin (2013) Classification of the Quality of Agarwood Oils from Malaysia using Z-Score Technique. In: IEEE 3rd International Conference on System Engineering and Technology (ICSET 2013), 19-20 August 2013 , Shah Alam, Malaysia. pp. 78-82..

Nurlaila, Ismail and Nor Azah, Mohd Ali and Mailina, Jamil and Mohd Hezri, Fazalul Rahiman and Saiful Nizam, Tajuddin and Mohd Nasir, Taib (2013) A Review Study of Agarwood Oil and Its Quality Analysis. Jurnal Teknologi, 68 (1). pp. 37-42. ISSN 2180-3722

Nurmunira, Muhammad and Ideris, Zakaria and Namdar, Abdoullah (2013) Modification of Kaolin Mineralogy and Morphology by Heat Treatment and possibility of Use in Geotechnical Engineering. International Journal of GEOMATE, 5 (2). pp. 685-689. ISSN 2186-2982 (print); 2186-2990(online)

Nursakinah, Mat Saad (2013) Simulation and validation of adsorption process for acrylic acid removal from waste water. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurshahiera, Mohidin (2013) Experimental investigation the effect of nanofluid on the pressure drop across the solar collector. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nursyafinaz, Jaafar (2013) E-ECLAB inventory system for FKP ( software development ). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nursyiqah, Jasman (2013) The performance of limestone filter with horizontal subsurface flow (HSF) wetland in landfill treatment. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Afiqah , Zainal (2013) The potential of wind and solar energy for development of hybrid energy system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurul Aini, Ibrahim (2013) The effects of worker stress on the job performance in electronic manufacturing. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Nurul Ajilah, Mohamad Rosalan (2013) A study on inventory control system practice in Kuantan food processing small medium enterprise (sme). Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Nurul Akma , Reduan (2013) Study on optimum condition in ph solution of rice husk based superabsorbent polymer composite. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Nurul Amirah, Abdullah (2013) Experimental analysis of passive bandwidth estimation tool for multiple hop wireless networks /. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurul Anis , Mazni (2013) A research on critical factors that influence construction productivity related to human power in Gambang and Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Ashikin, Mansor (2013) Interactive driver educational courseware. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Nurul Asmawati, Roslan (2013) Study the effect of operation parameter for monoethanolamine (mea) wastewater treatment using activated carbon, chitosan and rice husk. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Fadhilah, Roslan (2013) Development of PCA-Based Fault Detection System Based on Various Modes of NOC Models for Continuous-Based Process. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Fahana, Abdul Pattah (2013) Extraction of Lantana Camara for Wound Healing Application. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Farhana, Rosly and Rabeah Adawiyah, Abdul Razak and Palaniselvam, Kuppusamy and M. M., Yusoff and Natanamurugaraj, Govindan (2013) Induction of Bioactive Compound Composition from Marine Microalgae (Lyngbya sp.) by using Different Stress Condition. Journal of Coastal Life Medicine, 1 (3). 209-213. ISSN 2309-5288 (Print), 2309-6152 (Online)

Nurul Farhanah, Rosli (2013) Analysis and prediction of injected parts by using mould filling simulation software. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurul Fariha, Mohamad (2013) The effect of recycled polycarbonate mixing ratio on the tensile strength of polycarbonate polymer. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Nurul Fatehah, Sulaiman (2013) Smkdiy attendance management system with sms service. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurul Fatimah, Abdul Basir (2013) Investigating the Effect of Polymer Molecular Weight on Drag Reduction Performance Using Rotating Disk Apparatus (RDA). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Fazilawani , Mohamad (2013) The effect of bottom ash (BA) as partial sand replacement on concrete compressive strength and workability. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Hafifah , Arifin (2013) A study on commercial solid waste composition and generation rate in Indera Mahkota 16, Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Hafizah, Johar (2013) PSM/PTA asset management ystem (PAMS). Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Nurul Hafizah , Abdullah Hasim (2013) Energy conversion from DC generator part in wind turbine to produce electricity /. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurul Haslin, Adnan (2013) Business Plan for the Production of Fructo-Oligosaccharide. Masters thesis, Universiti Malaysia Pahang.

Nurul Hazlina, Noordin and Arslan, Tughrul and Flynn, Brian (2013) 3-Faceted Array With Low Side Lobe Levels Using Tunable Windows. In: 7th European Conference on Antennas and Propagation (EuCAP 2013), 8-12 April 2013 , Gothenburg, Sweeden. pp. 600-604..

Nurul Hazlina, Noordin and Arslan, Tughrul and Flynn, Brian and Erdogan, Ahmet T. and El-Rayis, Ahmed O. (2013) Single-Port Beamforming Algorithm for 3-Faceted Phased Array Antenna. IEEE Antennas and Wireless Propagation Letters, 12 . pp. 813-816. ISSN 1536-1225

Nurul Hazlina, Noordin (2013) Adaptive array antenna design for wireless communication systems. PhD thesis, University of Edinburgh.

Nurul Hidayah, Saifuddin and Abdullah, Embong (2013) EEG Brain Waves Pattern Analysis on the Specified Human Daily Activity. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS - 2013), 20-22 August 2013 , Universiti Malaysia Pahang. pp. 1-10.. (Unpublished)

Nurul Husna, Mahmud (2013) Demi kesucian tempat ibadah. Metro .

Nurul Izzah , Ahmad (2013) Characterization and thermostability study of invertase by Aspergillus niger in submerged culture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Izzati, Abd Ghalib (2013) Ammonia-N removal using soil mixed culture : factorial analysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Jasmie, Che Ahamed (2013) Optimizing of stud configuration on soccer boot: a finite element method. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nurul Khairiyyah, Mohd Zain and Izan Izwan, Misnon and Radhiyah, Abd Aziz and Mohd Hasbi, Ab. Rahim and M. M., Yusoff and Rajan, Jose (2013) High Performance Electrochemical Capacitor Based on Activated Carbon Derive from Palm Oil Kernel Shell. In: American Chemical Society Meeting . pp. 1-2.. (Unpublished)

Nurul Mimi Suziana , Abdul Aziz (2013) Investigating the potential of using moringa oleifera husks for bioethanol production. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Salwa Azliyana, Hamzah (2013) Chemistry solution study of gaharu water-mixture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Salwana, Mohamad Kamal (2013) Job characteristics affecting employees' job involvement in fast food industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nurul Suhada, Drahim (2013) Study on polyester composite nanofiltration (nf) membrane by interfacial polymerization for Natural Organic Matter (NOM) removal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Suraya, Azahari (2013) Particle impact prediction of an archimedes screw runner blade for micro hydro turbine. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nurul Syuhada, Md Nasir (2013) Mail/parcel management system with SMS. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Nurul Umaira Nisa, Mazelan (2013) Desulfurization of model oil using pyridinium-based ionic liquid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Umaira Nisa, Mazelan (2013) Desulfurization of model oil using pyridinium-based ionic liquid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Wahidah, Mohd Zin (2013) Implement Jacob Nielsen heuristic on develop sistem pengurusan guru ganti Selangor ESPGGS. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Nurul Wahidah, Zainal Al Abidin (2013) My mobile class assistant application on android platform. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Nurul'ain , Othman (2013) Effectiveness Magnesium ammonium phospate (MAP) precipitation and filtration method in treatment of palm oil mill effluent (POME). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurulamni, Md Mukhtar (2013) Experimental analysis on water pipe turbine-generator design parameters. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nurulfatiha , Ismail (2013) Linear static analysis of a steel roof truss. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurulhidayah, Rosli (2013) Simulation on the effect of temperature on forward osmosis process across membrane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurulilliani , Mohd Shukri (2013) Chemical characteristics of carbon nanoparticle converts from wood fiber waste via subcritical liquid and pyrolysis conditions. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang.

Nurulnizam , Mohamed (2013) Comparison of methods for evaluating bond strength between concrete substrate and repair materials. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nuruzzaman, D. M. and Siti Nur Sakinah, Jamaludin and Faizal, Mustapha and Shah Nor, Basri (2013) A Review on the Fabrication Techniques of Functionally Graded Ceramic-Metallic Materials in Advanced Composites. Scientific Research and Essay , 8 (21). pp. 828-840. ISSN 1992-2248

Nusaibah, Ghazali (2013) Effect of ultrasound on anaerobic fermentation by Saccharomyces Cerevisiae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

O

Obed M., Ali and R., Mamat (2013) Improving Engine Performance and Low Temperature Properties of Blended Palm Biodiesel Using Additives. A Review. Applied Mechanics and Materials, 315 . pp. 68-72. ISSN 1662-7482

Obed M., Ali and R., Mamat and C. K. M., Faizal (2013) Effects of Diethyl Ether Additives on Palm Biodiesel Fuel Characteristics and Low Temperature Flow Properties. International Journal of Advanced Science and Technology (IJAST), 52 . pp. 111-120. ISSN 2005-4238

Obed M., Ali and R., Mamat and C. K. M., Faizal (2013) Review of the Effects of Additives on Biodiesel Properties, Performance, and Emission Features. Journal of Renewable and Sustainable Energy, 5 (1). ISSN 1941-7012

Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2013) Effects of Blending Ethanol with Palm Oil Methyl Esters on Low Temperature Flow Properties and Fuel Characteristics. International Journal of Advanced Science and Technology, 59 . pp. 85-96. ISSN 2005-4238

Oluwasoga, Akindoyo Edward (2013) Introducing a new trio effects portable water treatment plant for rural areas. Masters thesis, Universiti Malaysia Pahang.

Ong, Horn Lu (2013) Single axis rotation pv solar panel tracking system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ong, Rong San (2013) Design and development automated gripper control for robotic arm. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ong , Pui Sze (2013) Design, analyse and manufacture propeller blade for remotely underwater vehicle. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ooi, Yew Kun (2013) Study on domestic wastewater treated using modified rice husk slow sand filter. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ooi Boon, Khuan (2013) Study of FSKKP portal based on Shneiderman’s eight golden rules. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Oudah, Ali A. (2013) Resource Element-Level Dimensioning Of Long Term Evolution Networks. Resource Element-Level Dimensioning Of Long Term Evolution Networks .

P

P., Murukesavan and N. M. M., Ammar and M. S., Idris (2013) Computational Analysis of an Effect of Aerodynamic Pressure on the Side View Mirror Geometry. In: International Conference on Mechanical Engineering Research (ICMER 2013), 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

Pang, Sook Fun (2013) Identification, Extraction and Microencapsulation of Phenolic Compounds from Orthosiphon Stamineus Leaves. Masters thesis, Universiti Malaysia Pahang.

Pebrianti, Dwi and Rosdiyana, Samad and Zainah, Md. Zain and Irawan, Addie and Mohd Razali, Daud (2013) Visual Impaired Person Navigation Assistance Using Motion Sensor. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Pejabat, Naib Canselor UMP (2013) Ucapan Yang Hormat Profesor Dato' Dr Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang Sempena Majlis Amanat Tahunan Naib Canselor 2013. In: Menuju Kecemerlangan, Kembali Kepada Asas, 20 Februari 2013, Dewan Kompleks Sukan Universiti, UMP Kampus Gambang. (Unpublished)

Peng Yang, Chua (2013) Evaluation of coeffecient of consolidation and compression index of Kuantan clayey soils stabilised by recycled and reused soils stabilised by recycled and reused materials mixed with portland cement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Perabu, Moorty (2013) Design an automobile simulation test rig. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Phillisca Prima , Adan (2013) Analysis of pesticide residues in the vegetables by using gas chromatography - electron capture detector. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Phoon, Sin Ye (2013) Green manufacturing: effect of vortex tube on machinability of Mild steel. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Phui, Law Woon (2013) Optimization of solution polymerization of methyl methacrylate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Prakash Raj, Subramaniam (2013) Failure pressure prediction of pipelines steel in the presence of corrosion defects and pre-strain. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Prakash Raj, Subramaniam (2013) Failure pressure prediction of pipelines steel in the presence of corrosion defects and pre-strain. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Prof Dato' Dr Daing Nasir, Daing Ibrahim (2013) Relevant, applicable learning and research. News Strait Times ((15 Ju).

Prof Dato' Dr Daing Nasir, Daing Ibrahim (2013) The postgraduate relationship. New Straits Times, (15 Au . p. 5.

Prof Dato' Dr Daing Nasir, Daing Ibrahim (2013) Advancing automotive agenda. New Straits Times, (15 Oc . p. 6.

Prof Dato' Dr Daing Nasir, Daing Ibrahim (2013) Platform for internationalisation. New Straits Times, (15 Ju . p. 18.

Prof Dato' Dr Daing Nasir, Daing Ibrahim (2013) Pursuing research collaboration potentials. New Straits Times, (15 No . p. 7.

Prof Dato' Dr Daing Nasir, Daing Ibrahim (2013) Transformasi pengajian tinggi ubah landskap pendidikan negara. Berita Harian, (6 May . pp. 28-29.

Puteri Emme Marina, Mohamad and Ling, Ling Tan and K. F., Chong (2013) Functionalized Graphene as Energy Storage Supercapacitor. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. p. 1..

Puvanesan, Muthusamy (2013) Experimental investigation of minimum quantity lubrication on tool wear in aluminum alloy 6061-T6 using different cutting tools. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Q

Qurratuaini, Hassanusi (2013) Thermodynamic Study of Propane Dehydrogenation Into Propylene. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

R

R., Mamat and Abdul Adam, Abdullah and Mohd Hafizil, Mat Yasin and Nik Rosli, Abdullah and Wyszynski, Miroslaw L. (2013) Cycle-to-Cycle Variations of a Diesel Engine Operating with Palm Biodiesel. In: Proceedings of 39th International Scientific Congress on Powertrain and Transport Means European (KONES2013), 6-12 September 2013 , Turata, Poland. pp. 1-9..

R., Ridzuan and Beg, M. D. H. and R. M., Yunus and S., Samahani and M. H., Rohaya and A. A., Astimar and I., Zawawi (2013) Effects of Coupling Agent and Flame Retardant on the Performances of Oil Palm Empty Fruit Bunch Fiber Reinforced Polypropylene Composites. World Academy of Science, Engineering and Technology, 7 (6). pp. 1962-1970. ISSN 2010-3778

R. M., Hizam and A., Manalo and W., Karunasena (2013) Effect of Eccentricity on the Behavior of Pultruded FRP Bolted Joint. In: 3rd Malaysian Postgraduate Conference (MPC2013), 4-5 July 2013 , Sydney, New South Wales, Australia. pp. 303-311..

Raafat Salih , Hadi (2013) Classification of human parasitic worm using microscopic image processing technique. Masters thesis, Universiti Malaysia Pahang.

Rabbiatul Addawiyyah, Ahmad Bustaman (2013) Assessment on effect of geometry defect for steel pipe. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Rabiatul Adawiyah, Sharom (2013) Whey protein fractionation using Q-Sepharose anion exchange chromatography and SP-Sepharose cation exchange chromatography. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Racqueal Manggau , Donold (2013) Causes, effects and possible solutions of variation order in project performance. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Radhiah, Abd Razak (2013) Optimal design of a competition bicycle for comfort riding ( focus on bicycle seat for female). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Rafidah, Saidin (2013) The effect of solar geometry on a window shade for energy efficient design of building. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Rafiqa Liyana, Rahimi (2013) To study optimum parameters in the soap production derived from palm kernel oil and palm oil by saponification. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Raghad, Yaseen Lazim and Adzhar, Kamaludin (2013) Going Native: Indexing Architecture of eXist-db_ An Open Source Native XML Database System. In: 2013 IEEE International Conference of Region 10 TENCON 2013, 22-25 October 2013 , Xian, China. pp. 1-4.. ISBN 978-1-4799-2827-9

Raheem, Ajiboye Adeleke and Ruzaini, Abdullah Arshah and Hongwu, Qin (2013) Datasets Size: Effect on Clustering Results. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS - 2013), 20-22 Ogos 2013 , Universiti Malaysia Pahang. pp. 1-9.. (Unpublished)

Raheem, Ajiboye Adeleke and Ruzaini, Abdullah Arshah and Qin, Hongwu (2013) Risk Status Prediction and Modelling Of Students’ Academic Achievement - A Fuzzy Logic Approach. International Journal Of Engineering And Science, 3 (11). pp. 7-14. ISSN 2319-6483(Print); 2278-4721(Online)

Raja Hartieni, Raja Muhamad Tamrin (2013) Optimization of biohydrogen from palm oil mill effluent (POME) using immobilized biomass. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Raja Norain Hidayah , Raja Abdul Aziz (2013) 'Jangan gadai kesucian Islam'. Harian Metro .

Rajan, Jose and Fakharuddin, Azhar and Panikar, Sathyaseelan Archana and M. M., Yusoff (2013) On The Scalability of Dye-Sensitized Solar Cells : Effect of Photoelectrode Area on the Photovoltaic and Charge Transport Parameters. In: Spring 2013 New Orleans ACS National Meeting, 7-11 April 2013 , New Orleans, Louisiana. pp. 1-2..

Rajan, Jose and M. M., Yusoff and Archana, P. S. and Kumar, E. Naveen and Vijila, C. and Ramakrishna, S. (2013) Random Nanowires of Nickel Doped TiO2 With High Surface Area and Electron Mobility for High Efficiency Dye-Sensitized Solar Cells. Dalton Transactions, 42 . pp. 1024-1032. ISSN 1477-9226 (print); 1477-9234 (online)

Rajandran, Kanagaraj (2013) Bioethanol production from cassava by fermentation process using Saccharomyces Cerevisiae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Raman, Ashok Kumar Nair (2013) Improvement of cold flow properties of biodiesel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Raman, Dinesh Kumar (2013) Optimization and characterization of glycolysis of waste polyethylene terephthalate (PET) with polyethylene glycol (PEG). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ramaraju, Ramgopal Varma and Reddy, M. Chandra Sekhara and Rao, Veeredhi Vasudeva (2013) Experimental Investigation Of Relative Performance Of Water Based Tio2 And Zno Nanofluids In A Double Pipe Heat Exchanger. In: International Manufacturing Engineering Conference (IMEC 2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-10.. (Unpublished)

Ramdan, Razali and Mortaza, Mohamed and A. N., Abdalla and Muhammad, Rauf (2013) Design And Develop Automatic Battery Cyclic Tester. In: Technological Advances in Electrical, Electronics and Computer Engineering (TAEECE) , Konya. pp. 61-65..

Rameish Rao, Subarmaniyan (2013) Investigation of carbon nanotube and zinc oxide as additive for enhanced lubricant performance. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rashidi, Abbas and Mohd Rizuan, Abd Kadir (2013) Customers Preferences Towards Syariah Compliant Products And Services: The Case Study Among Academician and Non-Academician In Higher Education Institutions (HEIs) In Pahang. Jurnal Muamalat, 3 . pp. 1-17. ISSN 1985-6156

Rashidi, Abbas (2013) Pembangunan akhlak dalam kalangan pelajar institusi pengajian tinggi awam di Malaysia menerusi penerapan kemahiran insaniah. PhD thesis, Universiti Malaya.

Rashidi, Abbas and Fakhrul Adabi, Abdul Kadir and Ilhamie, Abdul Ghani Azmi (2013) The Importance of Entrepreneurial Skills in Generic Skills Elements as Perceived by Malaysian Soft Skills Scale (My3S). Jurnal Muamalat, 6 . pp. 153-186. ISSN 1985-6156

Rashidi, Abbas and Fakhrul Adabi, Abdul Kadir and Ilhamie, Abdul Ghani Azmi (2013) Integrating Islamic Values in the Theory and Practice of Entrepreneurship. An Analysis in Higher Learning Institution in Malaysia. International Journal of Education and Research, 1 (4). pp. 209-220. ISSN 2201-6333 (Print); 2201-6740 (online)

Rashidi, Abbas and Fakhrul Adabi, Abdul Kadir and Ilhamie, Abdul Ghani Azmi (2013) Integrating Soft Skills Assessment Through Soft Skills Workshop Program for Engineering Students at University of Pahang: An Analysis. International Journal of Research In Social Sciences, 2 (1). pp. 33-46. ISSN 2307-227X

Rashidi, Abbas and Fakhrul Adabi, Abdul Kadir and Ilhamie, Abdul Ghani Azmi (2013) My3s (Malaysian Soft Skills Scale) Strategies for Soft Skills Development Through the Fostering of Entrepreneurial Skills: An Analysis. International Journal of Technology Management, 2 . pp. 47-62. ISSN 2289-2753

Rashidi, Abbas and Mohd Rizuan, Abd Kadir (2013) Customers Preferences Towards Shariah Compliant Products And Services: The Case Study Among Academician and Non-Academician in Higher Education Institutions (HEIs) in Pahang. Jurnal Muamalat, 6 . pp. 187-205. ISSN 1985-6156

Razman, Mat Tahar and Cheng, Jack Kie and Ahmad Borhan, Ahmad Nordin (2013) Measuring Performance Efficiency of Oil Palm Plantations using Window Analysis. Oil Palm Industry Economic Journal, 13 (1). pp. 22-34. ISSN 1675-0632

Reza, M. S. and S. N., Aqida and Mohd Toff, Mohd Radzi and Brabazon, D. (2013) Thermal Barrier Coatings on Laser Surface Modified AISI H13 Tool Steel Using Atmospheric Plasma Spray Technique. Key Engineering Materials, 554-55 . pp. 603-610.

Ridawanah, Upe (2013) The effectt of natural fiber using lalang grass as an additive in reinforced concrete on compressive strength and flexural strength. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ridzuan, Ramli and Khan, Maksudur R. and Chowdhury, Najmul Kabir and Beg, M. D. H. and Rohaya, Mohamed Halim and Astimar, Abdul Aziz and Zawawi, Ibrahim and Nahrul Hayawin, Zainal (2013) Development of Cu Nanoparticle Loaded Oil Palm Fibre Reinforced Nanocomposite. Advances in Nanoparticles, 2 . pp. 358-365.

Robiatun Ain, Maidin (2013) Extraction and characterization of gelatine from chicken skin. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rodianah, Alias (2013) An Inexpensive & Safe Method for Preparation of Caryophyllene Oxide. Masters thesis, Universiti Malaysia Pahang.

Rofiza, Mansor and Norafattull Salwa , Ab Rahman and Siti Fatimah, Mohamad and Kuppusamy, Palaniselvam and M. M., Yusoff and Govindan, Natanamurugaraj (2013) Isolation and Identification of Marine Algae (Oscillatoria Sp.) From Kuantan Coastal Region Malaysia and Studies on Their Bioactive and Antibacterial Properties. World Applied Sciences Journal, 28 (2). pp. 200-204. ISSN 1818-4952

Rohaida, Ramli and Shahida, Sulaiman and Kamal Z., Zamli (2013) Designing a Test Set for Structural Testing in Automatic Programming Assessment. International Journal of Advances in Soft Computing and Its Application (Int. J. Advance Soft Compu. Appl.), 5 (3). pp. 41-64. ISSN 2074-8523

Rohana, Abdul Karim and Nor Farizan, Zakaria and Mohd Asyraf, Zulkifley and Mohd Marzuki, Mustafa (2013) Telepointer Technology in Telemedicine : A Review. BioMedical Engineering, 12 (21). pp. 1-19.

Ros Arianty, Mohamad Ghazali (2013) Evaluation on national car's seat belt design for comfort of small size driver. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ros Ayu, Abdullah and Mohd Lazim, Abdullah and Wan Salihin Wong , Abdullah and M. R., Abdul Hamid (2013) Pengesahan Instrumen Penerimaan Pembelajaran-E. Journal of Quality Measurement and Analysis, 9 (2). pp. 1-10. ISSN 1823-5670

Rosdi, Daud and Mohammed Rafiq, Abdul Kadir and Sudin, Izman and Amir Putra, Md Saat and Muhammad Hisyam, Lee and Aminudin, Che Ahmad (2013) Three-Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali. The Journal of Foot and Ankle Surgery, 52 . pp. 426-431. ISSN 1067-2516

Rosdiyana, Samad and Fauziah, Zawawi (2013) Oil Palm Fruit Maturity Grading System using Computer Vision Technique. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Roslinazairimah, Zakaria and J. W., Boland and Nor Hafizah, Moslim (2013) Comparison of Sum of Two Correlated Gamma Variables for Alouini's Model and McKay Distribution. In: 20th International Congress on Modelling and Simulation, 1-6 December 2013 , Adelaide, Australia. pp. 408-414..

Roslinazairimah, Zakaria and Howlett, P. G. and Piantadosi, J. and Boland, J. W. and Nor Hafizah, Moslim (2013) Modelling Catchment Rainfall Using Sum of Correlated Gamma Variables. Jurnal Teknologi (Sciences and Engineering), 63 (2). pp. 85-88. ISSN 0127-9696 (print); 2180-3722 (online)

Rosmawati, Naim and Khulbe, K.C. and A. Fauzi, Ismail and T., Matsuura (2013) Characterization of PVDF Hollow Fiber Membrane for CO2 Stripping by Atomic Force Microscopy Analysis. Separation and Purification Technology, 109 . pp. 98-106. ISSN 1383-5866

Rosmawati, Naim and A. Fauzi, Ismail (2013) Effect of Polymer Concentration on the Structure and Performance of PEI Hollow Fiber Membrane Contactor for CO2 Stripping. Journal of Hazardous Materials, 250-25 . pp. 354-361. ISSN 0304-3894

Rosmawati, Naim and Ahmad Fauzi, Ismail and N. B., Cheer and M. S., Abdullah (2013) Polyvinylidene Fluoride and Polyetherimide Hollow Fiber Membranes for CO2 Stripping in Membrane Contactor. Chemical Engineering Research and Design, 92 (7). pp. 1391-1398. ISSN 0263-8762

Rosmazi, Rosli (2013) Active force control with iterative learning control algorithm for a vehicle suspension. Masters thesis, Universiti Teknologi Malaysia.

Rosmimie, Abdullah (2013) Industrial gas piping system for chemical engineering laboratory Universiti Malaysia Pahang. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rosniza, Mohd Taha (2013) Kit histeria ciptaan UMP. Berita Harian .

Rosniza, Mohd Taha (2013) Pengiktirafan untuk penuntut IPT. Berita Harian .

Rosniza, Mohd Taha (2013) UMP bantu industri automotif. Berita Harian .

Rosniza, Mohd Taha (2013) UMP berazam lahirkan pakar jurutera perniagaan. Berita Harian .

Rosniza, Mohd Taha (2013) UMP jalin kerjasama dengan 4 IPT Turki. Berita Harian .

Rosniza, Mohd Taha and Basir, Zahrom (2013) Pengiktirafan untuk penuntut IPT. Berita Harian .

Rosyati, Hamid and Faradila, Naim and Nurul Wahidah, Arshad and Zeehaida, Mohamed (2013) Automated Detection And Counting Of Pus Cells On Sputum Images. In: Electronics, Computer and Computation (ICECCO), 7-9 Nov. 2013 , Ankara. pp. 5-8..

Rosyati, Hamid and Norazura, Abd. Halim and Nurul Wahidah, Arshad and Faradila, Naim and Mohd Falfazli, Mat Jusof and Zeehaida, Mohamed (2013) Feature Extraction of Pus Cells Detection and Counting in Sputum Slide Images. In: Electronics, Communications and Photonics Conference (SIECPC), 2013 Saudi International, 27-30 April 2013 , Riyadh. pp. 1-6..

Rozita, Mohd Yusof and Norrozila, Sulaiman (2013) A Review on Minutiae Extraction of Fingerprint. Global Journal of Computer Sciences, 3 (2). pp. 31-36.

Rubiah, Ahmad and Yasmin, Abdul Wahab (2013) Application of Ultrasonic Tomography to Display Tomogram of Liquid/Solid Flow Regime by Using Linear Back Projection. In: 2nd International Conference on Electrical,Control and Computer Engineering 2013 (InECCE 2013), 27-28 August 2013 , M. S. Garden Hotel, Kuantan. pp. 1-4.. (Unpublished)

Ruhaizin, Sulaiman and Zahari, Taha and Siti Zawiah, Md. Dawal (2013) Application of Anthropometric Dimensions for Estimating Stove Height, Stove Depth and Cooking Task Envelope for Malaysian Elderly Population. Pertanika Journal of Science & Technology (JST), 21 (1). pp. 283-298. ISSN 0128-7680

Ruhil Amal, Azmuddin and Mohammad Musab, Azmat Ali and Nor Yazi, Khamis (2013) Belonging in Australia not Turkey: The Sense of Belonging for Turkish Australians Living in Sydney. International Journal of Education and Research, 1 (8). pp. 1-10. ISSN 2201-6333 (Print); 2201-6740 (online)

Ruhil Amal, Azmuddin and Nor Yazi, Khamis and Mohammad Musab, Azmat Ali (2013) Belonging in Australia Not Turkey: The Sense of Belonging for Turkish Australians Living in Sydney. International Journal of Education and Research, 1 (8). pp. 1-10. ISSN 2201-6333 (Print); 2201-6740 (online)

Ruzainisuhanaliza, Abdul Muni and Ruzaini, Abdullah Arshah and Tuty Asmawaty, Abdul Kadir and Mazlina, Abdul Majid and Rozlina, Mohamed (2013) Compilation of Social Media and Social Networking Sites Features. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS 2013), 20-22 August 2014 , Kuantan, Pahang. .

Ruzlaini, Ghoni (2013) Modeling and implementation of space vector modulation for three-phase direct torque control matrix converter. PhD thesis, Universiti Malaysia Pahang.

S

S., Abdullah and Che Ku Eddy Nizwan, Che Ku Husin and M. F. M., Yunoh and M. Z., Nuawi and Z. M., Nopiah (2013) Fatigue Features Extraction of Road Load Time Data Using the S-Transform. International Journal of Automotive Technology, 14 (5). pp. 805-815. ISSN 1229-9138

S. A., Che Ghani and Kai, Cheng and Timothy, Minton (2013) Back Chip Temperature in Environmentally Conscious Turning with Conventional and Internally Cooled Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 4 . pp. 356-372. ISSN 2289-4659 (print); 2231-8380 (online)

S. Jaber, Aqeel and Abu Zaharin, Ahmad and A. N., Abdalla (2013) An Investigation of Scaled-FLC Using PSO for Multi-area Power System Load Frequency Control. Energy and Power Engineering, 5 (4). pp. 458-462. ISSN 1949-243X (print); 1947-3818 (online)

S. N., Aqida and Brabazon, Dermot and Naher, Sumsun (2013) Atomic Diffusion in Laser Surface Modified AISI H13 Steel. Applied Physics A, 112 (1). pp. 139-142. ISSN 0947-8396 (Print) 1432-0630 (Online)

S. N., Aqida and Brabazon, Dermot and S., Naher (2013) An Investigation of Phase Transformation and Crystallinity in Laser Surface Modified H13 Steel. Applied Physics A, 110 (3). pp. 673-678. ISSN 0947-8396 (Print) 1432-0630 (Online)

S. N., Aqida and Fauzun, Fazliana and Wahab, Md. Saidin (2013) Laser Surface Modification of AISI 1025 Low Carbon Steel using Pulsed Nd:YAG Laser for Enhanced Surface Properties. Key Engineering Materials , 554-55 . pp. 596-602.

S. N., Aqida (2013) UMP dan 3 Universiti Asia kongsi kepakaran dalam teknologi acuan tekap. CREATE . p. 33. ISSN 1823-7487

S. R. A., Rahim and Ismail, Musirin and M. M., Othman and M. H., Hussain and M. H., Sulaiman and A., Azmi (2013) Effect of Population Size for DG Installation using EMEFA. In: 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO2013), 3-4 June 2013 , Langkawi. pp. 746-751..

Saad, Saima and Abdullah, Ibrahim and Asma, Omme and Muhammad Saad, Khan and Abdul Qadir, Aneesa (2013) PRINCE2 Methodology: An Innovative Way of Project Management. In: Proceedings of 3rd International Conference on Business Management (ICoBM 2013), 27-28 February 2013 , Lahore, Pakistan. pp. 1-22..

Safuan Fathy, Amran (2013) Pressure management in pipe distribution system at Kuantan district. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Saher, Faisal Nadeem and Nasly, Mohamed Ali and Tuty Asmawaty, Abdul Kadir and Nasehir Khan, Yahaya (2013) Decision Support System Development Through GIS for Computer Aided River Management and Enhanced Agricultural Productivity. In: United National Pakistan International Workshop on Integrated use of Space Technology, 11-15 March 2013 , Islamabad, Pakistan. . (Unpublished)

Said, N. and Zulkarnain, Jema'at and Nurfariha F., Zakaria and Ahmad Z., Sulaiman (2013) Mixtures of S.rebaudiana Leaves and Stems Waste for Steviol g. (Steviosides) Synthesis Using Ethanol-Water Solvents. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-3..

Saidatul Shima, Jamari and Howse, Jonathan R. and Azlinna, A. Bakar (2013) A Morphological Study on the Carbon Particles from Wood Fiber Waste via Hydrothermal Carbonization Process. International Journal of Chemical Engineering and Applications (IJCEA), 4 (3). pp. 149-152. ISSN 2010-0221

Saifful Kamaluddin, Muzakir@Lokman (2013) Density Functional Theory: From Quantum Dots to Solar Cell. In: Introduction to Density Functional Theory , Universiti Malaysia Terengganu. . (Unpublished)

Saifful Kamaluddin, Muzakir@Lokman (2013) Realistic cluster model of (CdSe)26 quantum confined structure. Royal Society of Chemistry, London, UK.

Saifful Kamaluddin, Muzakir@Lokman (2013) Realistic cluster model of (CdSe)32 quantum confined structure. Royal Society of Chemistry, London, UK.

Saifful Kamaluddin, Muzakir@Lokman (2013) Realistic model of IonLic BMII electrolyte (1-butyl-3-methylimidazolium iodide). Royal Society of Chemistry, London, UK.

Saifful Kamaluddin, Muzakir@Lokman (2013) Realistic model of mercaptoacetic acid - (CdSe)13 quantum dot conjugate. Royal Society of Chemistry, London, UK.

Saifful Kamaluddin, Muzakir@Lokman (2013) Realistic model of mercaptoacetic acid ligand. Royal Society of Chemistry, London, UK.

Saifful Kamaluddin, Muzakir@Lokman (2013) Realistic model of mercaptobenzoic acid - (CdSe)13 quantum dot conjugate. Royal Society of Chemistry, London, UK.

Saifful Kamaluddin, Muzakir@Lokman (2013) Realistic model of mercaptobenzoic acid ligand. Royal Society of Chemistry, London, UK.

Saifful Kamaluddin, Muzakir@Lokman (2013) Realistic model of mercaptopropionic acid - (CdSe)13 quantum dot conjugate. Royal Society of Chemistry, London, UK.

Saifful Kamaluddin, Muzakir@Lokman (2013) Realistic model of mercaptopropionic acid ligand. Royal Society of Chemistry, London, UK.

Saifful Kamaluddin, Muzakir@Lokman (2013) Realistic model of mercaptosuccinic acid - (CdSe)13 quantum dot conjugate. Royal Society of Chemistry, London, UK.

Saifful Kamaluddin, Muzakir@Lokman (2013) Realistic model of mercaptosuccinic acid - (CdSe)16 quantum dot conjugate. Royal Society of Chemistry, London, UK.

Saifful Kamaluddin, Muzakir@Lokman (2013) Realistic model of mercaptosuccinic acid ligand. Royal Society of Chemistry, London, UK.

Saifful Kamaluddin, Muzakir@Lokman and M. M., Yusoff and Rajan, Jose (2013) The Links Toward Highly Efficient Quantum Dot Solar Cells. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-3..

Saifful Kamaluddin, Muzakir@Lokman and Rajan, Jose and Nabilah, Alias and M. M., Yusoff (2013) On the Missing Links in Quantum Dot Solar Cells: a DFT Study on Fluorophore Oxidation and Reduction Processes in Sensitized Solar Cells. Physical Chemistry Chemical Physics, 15 (38). pp. 16275-16285. ISSN 1463-9076 (print), 1463-9084 (online)

Saifuddin , Baharuddin (2013) Investigation on the hybridoma cell requirement of glucose and glutamine concentration for growth. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Saiful Nizam, Tajuddin and Nurlaila, Ismail and Mohd Ali, Nor Azah and Mailina, Jamil and Mohd Hezri, Fazalul Rahiman and Mohd Nasir, Taib (2013) Analysis Of High Quality Agarwood Oil Chemical Compounds By Means Of Spme/Gc-Ms And Z-Score Technique. Malaysian Journal of Analytical Sciences, 17 (3). pp. 403-413. ISSN 1394-2506

Saiful Nizam, Tajuddin and Nurlaila, Ismail and Nor Azah, Mohd Ali and Mailina, Jamil and Mohd Hezri, Fazalul Rahiman and Mohd Nasir, Taib (2013) Differentiating Agarwood Oil Quality Using Artificial Neural Network. Malaysian Journal of Analytical Sciences, 17 (3). pp. 490-498. ISSN 1394-2506

Saiful Nizam, Tajuddin and M. M., Yusoff and Norfatirah, S. Muhamad and Mohd A., Yarmo (2013) Characterization of the Chemical Constituents of Agarwood Oils from Malaysia by Comprehensive Two-Dimensional Gas Chromatography–Time-of-Flight Mass Spectrometry. Mendeleev Communications, 23 (1). pp. 51-52. ISSN 0959-9436 (print), 1364-551X (online)

Saima, Said and Abdullah, Ibrahim and Omme, Asma and Muhammad Saad, Khan and Junaid, Akhter (2013) Prince2 Methodology: An Innovative Way for Improving Performance of Malaysian Automotive Industry. Journal of Technology Management and Technopreneurship, 1 (1). pp. 101-116. ISSN 2231-7996

Sakina, Shahabudin (2013) Epitope mapping and functional characterization of monoclonal antibodies against the tip-localized adhesions of CFA/I, CS17 and CS2 class 5 fimbriae of enterotoxigenic Escherichia coli. Masters thesis, The Pennsylvania State University.

Sakinah, Muhamad Hisham (2013) Experimental setup and biomechanics measurement of knee pads. Faculty of Mechanical Engineering, Universiti Teknologi Malaysia.

Sakundarini, Novita and Zahari, Taha and Salwa Hanim, Abdul-Rashid and Raja Ariffin, Raja Ghazilla and Gonzales, Julirose (2013) Multi-Objective Optimization For High Recyclability Material Selection Using Genetic Algorithm. The International Journal of Advanced Manufacturing Technology, 68 (5-8). pp. 1441-1451. ISSN 0268-3768 (Print), 1433-3015 (Online)

Salam, Urme and Muhammad Nubli, Abdul Wahab (2013) Drug Addiction Students and Heart Rate Variability Biofeedback: A Study on Solat Effect. Educational Technologies Series, 5 . WSEAS Press, Athens, Greece, pp. 103-108. ISBN 978-1-61804-172-2

Salam, Urme and Muhammad Nubli, Abdul Wahab and Ahmad, Ibrahim (2013) Potentiality of Taubah (Islamic repentance) and Listening to the Holy Quran Recitation on Galvanic Skin Response. International Journal of Psychology and Counselling, 5 (2). pp. 33-37. ISSN 2141 - 2499

Saleeza Azura , Sulaiman (2013) Extraction of essential oil from Cinnamomum Zeylanicum by various methods as a perfume oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Salman, Ahmad and Razman, Mat Tahar (2013) Using system dynamics to evaluate renewable electricity development in Malaysia. Kybernetes, 43 (1). pp. 24-39. ISSN 0368-492X

Salman, Ahmad and Razman, Mat Tahar (2013) Can Malaysia Meet Its Renewable Power Plant Expansion Target by 2015? Evidence from System Dynamics Model. International Journal of Technology Management, 2 . pp. 37-40. ISSN 2289-2753

Salwani, Mohd Salleh (2013) Computational crashworthy optimization of partially filled aluminium foam for automative side member. PhD thesis, Universiti Putra Malaysia.

Sandaray, Parthiban (2013) Flooding phenomena in two immiscible liquids system : conceptual approach. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sanmugam, Kumanan (2013) Charecterisation of Palm Oil Empty Fruit Bunch (POEFB) fiber via enzyme treatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sarah Fathiah , Ali (2013) Design & development of poka-yoke system for nut identification to defect prevention. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sarina, Shafie (2013) Coil winding machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Saw Hui, Ann (2013) Analysis of Microscopic Blood Samples for Detecting Malaria. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Sazwan, Sahar (2013) Design and analysis of the test section for an open channel flow flume. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sebastian, Heng Junjie (2013) Exploration of educational building with cultural elements using shape grammar. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Seow, Kok Foo (2013) Development of archery test rig. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ser, Beng Sian (2013) Development of four wheels space-frame hybrid air motorcycle chassis. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Shafie, Sulaiman (2013) Productivity improvement using industrial engineering tools (SMEs company). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shafiq, Suhaimi and R., Mamat and Nik Rosli, Abdullah (2013) Investigation of the Effects of Inlet System Configuration on the Airflow Characteristics. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

Shahfina , Mohd Jaafar (2013) The impact of mining activity on water quality at Tasik Chini. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Shahid , Ali (2013) Activated cement clinker catalyst development for biodiesel production. Masters thesis, Universiti Malaysia Pahang.

Shahren, Abd Manap (2013) Development of portable desk for biomechanics equipment. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Shahriar, Badsha and Norrima, Mokhtar and Hamzah, Arof and Ai Lian Lim, Yvonne and Marizan, Mubin and Zuwairie, Ibrahim (2013) Automatic Cryptosporidium And Giardia Viability Detection in Treated Water. EURASIP Journal on Image and Video Processing, 56 . pp. 1-10. ISSN 1687-5281

Shahrinnahar, Latib (2013) UMP pantau data AMS. Utusan Malaysia .

Shahrul Nazmi, Ismail (2013) Thesis project archive system (T-PAS). Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Shalash, Nadheer A. and Abu Zaharin, Ahmad (2013) New Reliability Index for Power System Protection Based On Multi-Agent Technique. In: Electric Power and Energy Conversion Systems (EPECS), 2-4 Oct. 2013 , Istanbul. pp. 1-6..

Shalfarina, Shahriman (2013) 47 terima peralatan sekolah. Berita Harian .

Shalfarina, Shahriman (2013) Penerbit UMP berusaha terbitkan pelbagai karya ilmiah. CREATE . p. 31. ISSN 1823-7487

Shamir , Sharafaddin (2013) Hybird fiber reinforced concrete: steel and coconut coir. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Sharifah Fathiyah, Sy Mohamad and Shahril, Mohamad and Azila, Abdul Aziz (2013) The Susceptibility of Aphids, Aphis gossypii Glover to Lauric Acid Based Natural Pesticide. Procedia Engineering, 53 . pp. 20-28. ISSN 1877-7058

Sharifah Shufiza Khaziri, Tuan Hadi (2013) Performance of red pigment production by Monascus purpureus at different extraction methods. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sharos Azuanuddin, Mat Sidek (2013) Mobi parking navigator system (sensor monitoring). Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Sharul Rizuan , Ismail (2013) To study the effectiveness of solid waste collection and transportation system around Kuantan municipal housing area. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Sharveenesh, Vathivellu (2013) Analysis of an archery bow using finite element method and the development of an arcery bow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shazmier Shah, Dilbar Shah (2013) Improvement of drying process in fish cracker production. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Shazril, Shaedi (2013) Lead acid battery management system for solar harvesting system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Shazwani , Ibrahim (2013) Effect of drying method on the antioxidant capacity of Cosmos Caudatus extract. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Shia, Hui Ching (2013) Weather notification system using GSM. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Shiew, Chan Fong (2013) Development of multiple interactions mixed matrix membrane chromatography using lewatit MP500 anion resin and lewatit CNP 105 cation resin for whey protein fractionation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shing Shian, Ng and Nur Azhani, Abd Razak (2013) Investigation of Mig Welding to Corrosion Behavior of Heat Treated Carbon Steel. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Shu Yuen, Ngang (2013) Waste glass as partial replacement for fine aggregate in mortar. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siddique, Md. Nurul Islam and Mimi Sakinah, A. M. and Zularisam, A. W. (2013) Anaerobic co-digestion of Petrochemical Wastewater: Effect of H2O2 on Cycle Time Minimization During Bio-methane Production. Energy Education Science and Technology Part A: Energy Science and Research, 31 (3). pp. 1229-1246. ISSN 1308-772X

Siddique, Md. Nurul Islam and Mimi Sakinah, A. M. and Zularisam, A. W. (2013) Role of Hydrogen Peroxide (H2O2) Enhanced Anaerobic Co-digestion of Petrochemical Wastewater on Cycle Time Minimization During Biomethanation. Scientific Research and Essay , 8 (22). pp. 996-1009. ISSN 1992-2248

Siddique, Md. Nurul Islam and Zularisam, A. W. (2013) Cycle Time Minimization During Renewable Methane Production from H2O2 Enhanced Anaerobic Co-Digestion of Petrochemical Wastewater in Continuous Stirred Tank Reactor. Asian Journal of Chemistry, 25 (2). pp. 1140-1148. ISSN 0970-7077

Siddique, Md. Nurul Islam and Zularisam, A. W. (2013) Role of Ammonium Bicarbonates in Methenogenesis While Co-digesting Petrochemical Wastewater with Activated Manure Sludge. Energy Education Science and Technology Part A: Energy Science and Research, 31 (3). ISSN 1308-772X

Siew, Kah Weng and Cheng, C. K. and Jolius, Gimbun (2013) Glycerol Dry Reforming Over Alumina-Supported Nickel Catalysts. In: 2nd Postgraduate Colloquium for Environmental Research 2013 (POCER 2013) , 28-29 June 2013 , Awana Hotels and Resorts, Genting Highlands, Pahang. pp. 1-2.. (Unpublished)

Singh, Lakhveer (2013) Biohydrogen production from palm oil mill effluent using polyethylene glycol immobilized cells in upflow anaerobic sludge blanket reactor. PhD thesis, Universiti Malaysia Pahang.

Singh, Lakhveer and Muhammad Faisal, Siddiqui and Anwar, Ahmad and Mohd Hasbi, Ab. Rahim and Mimi Sakinah, A. M. and Zularisam, A. W. (2013) Application of Immobilized Upflow Anaerobic Sludge Blanket Reactor Using Clostridium LS2 For Enhanced Biohydrogen Production and Treatment Efficiency of Palm Oil Mill Effluent. Biochemical Engineering Journal, 70 . pp. 158-165. ISSN 1369-703X

Singh, Lakhveer and Muhammad Faisal, Siddiqui and Anwar, Ahmad and Mohd Hasbi, Ab. Rahim and Mimi Sakinah, A. M. and Zularisam, A. W. (2013) Application of Polyethylene Glycol Immobilized Clostridium sp. LS2 for Continuous Hydrogen Production From Palm Oil Mill Effluent in Upflow Anaerobic Sludge Blanket Reactor. Biochemical Engineering Journal, 70 . pp. 158-165. ISSN 1369-703X

Singh, Lakhveer and Siddiqui, Muhammad Faisal and Ahmad, Anwer and Mohd Hasbi, Ab. Rahim and Mimi Sakinah, A. M. and Zularisam, A. W. (2013) Biohydrogen Production from Palm Oil Mill Effluent Using Immobilized Mixed Culture. Journal of Industrial and Engineering Chemistry, 19 (2). pp. 659-664. ISSN 1226-086X

Singh, Lakhveer and Zularisam, A. W. and Siddique, Md. Nurul Islam and Anwar, Ahmad and Mohd Hasbi, Ab. Rahim and Mimi Sakinah, A. M. (2013) Biohydrogen Production from Palm Oil Mill Effluent Using Immobilized Clostridium Butyricum EB6 in Polyethylene Glycol. Process Biochemistry, 48 (2). pp. 294-298. ISSN 1359-5113

Sirwan, Ranj and Alghoul, M.A. and Sopian, K. and Yusoff, Ali and Jasim, Abdulateef (2013) Evaluation Of Adding Flash Tank To Solar Combined Ejector–Absorption Refrigeration System. Solar Energy, 91 . pp. 283-296. ISSN 0038-092X

Siti A'isyah, Sukaimi (2013) Doakan kami. Harian Metro .

Siti Afifah , Hassan (2013) Design of an automatic antenna tuner. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Aina Mardhia, Dol Haji (2013) Design and fabricate of portable cnc milling machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Aishah, Muhmed (2013) Quantification of bioactive compounds from Averrhoa Bilimbi. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Aishah, Rusdan and Tarlochan, Faris and Mohamad Rusydi, Mohamad Yasin (2013) Modeling and Optimization of Tapered Rectangular Thin-walled Columns Subjected to Oblique Loading for Impact Energy Absorption. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Siti Aisyah, Shamshun Baharin (2013) Study on Optimum Condition of Empty Fruit Bunch (EFB) Based Superabsorbent Polymer Composite. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Aisyah Radhiah, Mohamed @ Ayub (2013) Production of beta-keratin from chicken feathers. Masters thesis, Universiti Malaysia Pahang.

Siti Amirah, Nor Effendi (2013) Permeability & characterization study of (polylactic acid) PLA-modified NA+ nanocomposites for packaging application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Amni Husna , Roslan (2013) The effect of recycled – high density polyethylene (hdpe) mixing ratio on the tensile strength of high density polyethylene (hdpe) polymer. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Anom , Lehan (2013) The effect of iron powder particle size to the cracked core defect - a case study on molded inductor (HM72A-12XXX). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti At Thahirah, Hasanul Ridza (2013) Temperature effect on polymerization kinetics of polystyrene. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Fairun Annisha, Hassan (2013) Absorption study of bis phenol a using molecular imprinted membrane. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Siti Faiznur, Daud (2013) Environmental Assessment of Alkali-Catalysed Biodiesel Process Using War Algorithm. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Farah, Mansor (2013) Intellectual property report. Quest, 10 (6). p. 6. ISSN 1985-8159

Siti Farahin, Badrul Hisham (2013) Assembly line balancing improvement : a case study in an electronic industry. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Siti Firdaus, Md Salleh (2013) Ductile failure analysis of API steel pipe using strain based failure criteria. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Siti Haifullia, Ayob (2013) The effectiveness of accuracy in cost estimation by using monte carlo simulation model. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Siti Haizum , Abu Hassan (2013) Moringa oleifera a possible source of biodiesel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Hajar , Zerry @ Azhari (2013) Study on the effect of ultrasound on cellulose hydrolysis by cellulase. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Hartini , Embong @ Ab Wahab (2013) Simulation modeling and analysis of productivity Enhancement in manufacturing company using arena Software. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Hatijah, Mortan and Wan Ruhayu, Wan Ramli (2013) Preliminary Study on Factors that Enhanced the Production of Uricase by Aspergillus Flavus. International Journal of Bioscience, Biochemistry and Bioinformatics, 3 (5). pp. 513-515. ISSN 2010-3638

Siti Hawa, Apandi and Rozlina, Mohamed (2013) Development of Attendance Management System: an Experience. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS - 2013), 20-22 Ogos 2013 , Universiti Malaysia Pahang. pp. 1-9.. (Unpublished)

Siti Ilyani, Rani and Jolius, Gimbun and B. A., Aziz (2013) Modeling of Gas-Solid Turbulence Flow in Silo. In: Proceedings of the 6th International Conference on Process Systems Engineering (PSE ASIA), Kuala Lumpur , 25-27 June 2013. pp. 784-798..

Siti Khadijah, Hubadillah (2013) Analysis of column cross section towards buckling analysis using civilfem with ansys software. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Kholijah, Abdul Mudalip and Mohd R., Abu Bakar and Parveen, Jamal and Fatmawati, Adam (2013) Solubility and Dissolution Thermodynamic Data of Mefenamic Acid Crystals in Different Classes of Organic Solvents. Journal of Chemical & Engineering Data, 58 (12). pp. 3447-3452. ISSN 0021-9568

Siti Marini , Saat (2013) Study on factor and criteria to select the ideal hydrology station. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Nadhira , Mohammad Sunar (2013) Design and development of wireless controller in CNC machining. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Siti Nafsiah, Mohamed Omar (2013) Production of Xylose from Oil Palm Trunk. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Najibah, Abd Rahman (2013) Comparison of chemical solvent for co2 removal from power plant using amine scrubbing process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nor , Ya (2013) A study on production productivity improvement in food processing industries. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Siti Nor Azira , Mahmood @ Che Mood (2013) Treatment of fish wastewater by using water spinach (ipomoea aquatica) in an aquaponic system. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Nor Suziyana, Dollah (2013) Simulation of micro hydro power based on river configuration at river downstream. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Siti Norashikin, Yusoff (2013) Lift structural plan and design for Kolej Kediaman Tiga Universiti Malaysia Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Norhaslina, Halim (2013) Synthesis on Bio Reaction Kinetics of Biodiesel Production from Rubber Seed Oil Using Lipase as the Catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Siti Norizat, Shikh Abdul Jalil (2013) Jasa siswa UMP kepada warga emas. Utusan Malaysia .

Siti Norizat, Shikh Abdul Jalil (2013) Mahasiswa UMP bantu mangsa banjir. Utusan Malaysia .

Siti Norizat, Shikh Abdul Jalil (2013) Matahari sumbang peralatan sekolah. Utusan Malaysia .

Siti Norizat, Shikh Abdul Jalil (2013) UMP pamer produk penyelidikan. Utusan Malaysia .

Siti Norsita, Mohd Rawi (2013) Regeneration and recycling hemodialysis membrane dialyzer. Masters thesis, Universiti Malaysia Pahang.

Siti Nudra Shafinie, Ab Aziz (2013) Determination of Phytochemical in Extracted Punica Granatum Peels and its Efficacy of Healing Burn Injuries. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nur Affizza , Md Yusuf (2013) A study on the characteristic and performance of cascade drain in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Nur Ain, Md Salleh (2013) The effect of recycled-acrylonitrile-butadiene-styrene (abs) mixing ratio on the tensile strength of acrylonitrile-Butadiene-styrene (abs) polymer. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Nur Liyana, Ahamd (2013) Implementing PCA-Based Fault Detection System Based on Selected Imported Variables for Continuous-Based Process. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nurhidayah, Daud (2013) Shooting techniques in archery sport based on biomechanics engineering: arm vibration analysis. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Siti Nurhidayah, Mohamad Khazali (2013) Progress monitoring system for student final year project. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Siti Nurzalikha Zaini, Husni Zaini and Sunardi, Dr. and Kamarul Hawari, Ghazali and Saiful Nizam, Tajuddin (2013) Application of Speech Recognition for Swiftlet Vocalizations. In: International Conference on Artificial Intelligence in Computer Science and ICT (AICS 2013), 25 - 26 November 2013 , Bayview Hotel, Langkawi, Malaysia. pp. 260-264..

Siti Rabiatull Aisha, Idris and Ali, Ourdjini (2013) Effect of Multiple Reflow on IMC Formation using Various Surface Finishes. International Journal of Microstructure and Materials Properties, 7 (6). pp. 502-516. ISSN 1741-8410 (print); 1741-8429 (online)

Siti Rabiatull Aisha, Idris and Muhammad Hadzreel, M. R. Aeyzarq (2013) Effect of Reinforcement Alignment to the Properties of Polymer Matrix Composite. Journal of Mechanical Engineering and Sciences (JMES) , 4 . pp. 548-554. ISSN 2289-4659 (print); 2231-8380 (online)

Siti Rabiatull Aisha, Idris and Azmah Hanim, Mohamad Ariff and Ali, Ourdjini and Saliza Azlina, Osman (2013) Effect of Isothermal Aging 2000 Hours on Intermetallics Formed Between Ni-Pd-Au with Sn-4Ag-0.5Cu Solders. Advanced Materials Research, 650 . pp. 194-199. ISSN 1022-6680 (print), 1662-8985 (online)

Siti Rabiatull Aisha, Idris and Azmah Hanim, Mohamad Ariff and Ourdjini, Ali and Saliza Azlina, Osman (2013) Intermetallic Evolution for Isothermal Aging Up To 2000hours on Sn-4ag-0.5cu and Sn-37pb Solders with Ni/Au Layers. International Journal of Automotive and Mechanical Engineering (IJAME), 8 . pp. 1348-1356. ISSN 1985-9325(Print); 2180-1606 (Online)

Siti Rabiatull Aisha, Idris and Ourdjini, Ali and Azmah Hanim, Mohamad Ariff and Saliza Azlina, Osman (2013) Effect of Reflow Profile on Intermetallic Compound Formation. IOP Conference Series: Materials Science and Engineering, 46 . pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online)

Siti Radiah, Arrippin (2013) Fluid structure interface (FSI) of force excitation on pipeline t-joint. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Roslindar, Yaziz and Noor Azlinna, Azizan and Roslinazairimah, Zakaria and Maizah Hura, Ahmad (2013) The Performance of Hybrid ARIMA-GARCH Modeling in Forecasting Gold Price. In: 20th International Congress on Modelling & Simulation 2013 (MODSIM2013), 1-6 December 2013 , Adelaide, Australia. pp. 1201-1207..

Siti Sabilah, Mohd Abdullah (2013) Adaptive web based tutoring system for medical student : gynecology. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Siti Salbiah, Mutalib (2013) Production of Bioethanol from Kundur [Benincisa Hispida (Thunb) Cogn]. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Sarah, Abd Rahman (2013) Finite element analysis (FEA) for soccer ball impact. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Sarah , Abdullah (2013) Optimization of enzymatic extraction of stevioside from stevia rebaudiana leaves by using cellulase. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Sarah , Kassim (2013) The impact of loading activity toards water quality and ecosystem of Tasik Chini, Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Solehah , Mohd Rusadi (2013) Design and development of SMED quick die change tools for small press dies. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Solehan, Tajuddin (2013) A study on the factors of employee empowerment on work performance in manufacturing industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Siti Suhairah, Omar (2013) hermostability of protein in starch derivative emulsion. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Zubidah, Jamrus (2013) Methanol production from carbon dioxide by photocatalytic reduction process. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Zulaikha, Ahmad Hamizan (2013) Finite element analysis of helical staircase using ansys software. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Zulaikha, Mohamad Amin (2013) Finite element analysis of concrete shell using ansys software. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Zuraida, Ismail (2013) Design and development of andon system for machining machine at FKP lab. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Sivarajah, Veeramony (2013) Analyzing non-value added process in order to improve layout design at P211A rear bumper production area in HICOM teck See. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Sivasangari, Krishnan (2013) Hiding and retrieval of text content using discrete cosine transformation (DCT) and tripledes (3Des) method. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Soh, Yan Xin (2013) Analysis of structure borne wave signatures in pipeline leakage detection. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Soheilirad, M. and Hizam, H. and Farzan, P. and Hojabri, Mojgan and Fallah, S. N. and Soheilirad, G. (2013) Wind Farm Reactive Power Optimization by Using Imperialist Competitive Algorithm. In: 2013 International Conference on Power, Energy and Control (ICPEC) . .

Solomon, Eugene Phang (2013) Evaluation of cohesion and friction angle of Kuantan clayey soil stabilised by recycled and reused materials mixed with lime. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Sorooshian, Shahryar (2013) Fuzzy Approach to Statistical Control Charts. Journal of Applied Mathematics, 2013 (745153). pp. 1-6. ISSN 1110-757X (print); 1687-0042 (online)

Sorooshian, Shahryar and Suziyana, Mat Dahan (2013) Analysis on Factors of Non-Compliance of Halal Standard. Journal of Engineering and Applied Sciences, 8 (9-12). pp. 280-281. ISSN 1816-949X

Sri Pooveyninthran, Nair (2013) Breast cancer drug delivery systems by differential delivery system using finite element analysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Suga Ganeshan, Kalaichalban (2013) CFD of a screw blade for standalone micro hydro generator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sugandha, Chahal and Jahir Hussain, Fathima Shahitha and M. M., Yusoff (2013) Characterization of Modified Cellulose (MC)/Poly (vinyl alcohol) Electrospun Nanofibers for Bone Tissue Engineering. Procedia Engineering, 53 . pp. 683-688. ISSN 1877-7058

Sughan Nair , Prabhakaran (2013) Broadcasting real time information using mobile and internet technology (badminton tournament live score system). Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Suhail Hadri , Shamsudin (2013) Modelling and analyzing of an active magnetic bearing. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Suhaimi , Ahmad (2013) Performance of fly ash based geopolymer concrete at high temperature. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Suhana , Sufian (2013) Case study of roadway visibility at Hulu Langat - Ampang Road. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Suhirman, na and Jasni, Mohamad Zain (2013) Applying Rough Set Theory for Student Clustering on Assessment Datasets. In: The 5th International Conference on Computer Science and Information Technology (CSIT 2013) , 27-28 March 2013 , Amman, Jordan. pp. 1-6.. (Unpublished)

Sulaiman, S. Z. and Kasmani, R. M. and Mustafa, A. and Mohsin, R. (2013) Effect of Obstacle on Deflagration to Detonation Transition (DDT) in Closed Pipe or Channel–An Overview. Jurnal Teknologi, 66 (1). pp. 49-52. ISSN 2180-3722

Sumaiya, Zainal Abidin and Haigh, Kathleen F. and Vladisavljević, Goran T. and Saha, Basudeb (2013) Comparison Of Novozyme 435 And Purolite D5081 As Heterogeneous Catalysts For The Pretreatment Of Used Cooking Oil For Biodiesel Production. Fuel, 111 . pp. 186-193. ISSN 0016-2361

Sunardi, D. and Noor Zirwatul Ahlam, Naharuddin and M., Azrul and Yudhana, Anton (2013) Prevent Turtle Trap in the Fishing Gear using Ultrasound. In: 8th IEEE Conference on Industrial Electronics and Applications (ICIEA), 2013, 19-21 June 2013 , Melbourne. pp. 1382-1387..

Sunarti, Abd Rahman and A. L., Ahmad (2013) Optimization Studies on TFC Membrane for Membrane Gas Absorption (MGA) Application. IOP Conference Series: Materials Science and Engineering, 46 (1). pp. 1-15. ISSN 1757-8981 (Print), 1757-899X (Online)

Suraj, Vijanathan (2013) Designing and fabrication of racket test rig. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Suriani, Mat Noor (2013) The role of project managers in sustainable building process: a study on Malaysian construction industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Suriati, Ghazali and Mariatti, Jaafar and Azizan, Aziz (2013) Synthesis of Silver Nanoparticles by Chemical Reduction Method and a Comparison Study of Silver-filled Epoxy Thin Film Composites. In: 3rd International Conference on the Advancement of Materials and Nanotechnology 2013 (ICAMN 2013), 19-22 November 2013 , Penang. pp. 1-5..

Suriyati, Saleh and Hansen, Brian Brun and Jensen, Peter Arendt and Dam-Johansen, Kim (2013) Efficient Fuel Pretreatment: Simultaneous Torrefaction and Grinding of Biomass. Energy and Fuels, 27 (12). pp. 7531-7540. ISSN 0887-0624 (Print); 1520-5029 (Online)

Suriyati, Saleh and Hansen, Brian Brun and Jensen, Peter Arendt and Dam-Johansen, Kim (2013) Influence of Biomass Chemical Properties on Torrefaction Characteristics. Energy & Fuels, 27 (12). pp. 7541-7548. ISSN 0887-0624

Suryanti, Awang and Rubiyah, Yusof and Mohamad Fairol, Zamzuri and Reza, Arfa (2013) Feature Level Fusion of Face and Signature Using a Modified Feature Selection Technique. In: International Conference on FSignal-Image Technology & Internet-Based Systems (SITIS 2013), 2-5 December 2013 , Kyoto. pp. 706-713..

Suryati , Mohd Mokhtar (2013) Ammonia-N removal using soil mixed culture:kinetic. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sutarman, na and Mazlina, Abdul Majid and Jasni, Mohamad Zain (2013) Vision-Based Sign Language Recognition Systems : A Review. In: The 5th International Conference on Computer Science and Information Technology (CSIT 2013) , 27-28 March 2013 , Amman, Jordan. pp. 1-7.. (Unpublished)

Suziella, Awang (2013) Design a novel inhibitor for corrosion protection in oil and gas environments. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suziyana, Mat Dahan and Mohd Yusof, Taib and Nurhaizan, Mohd Zainudin and Fadzida, Ismail and Ahmad Nazif, Noor Kamar (2013) A Study on Student's Perception Towards The Quality of Services Provided by The Library, University Malaysia Pahang (UMP). In: International Conference on Engineering Education 2013, 24-25 December 2013 , Madinah. pp. 1-7.. (Unpublished)

Suziyana, Mat Dahan and S. N., Nina and T. M., Yusof and Ahmad Basirul Subha, Alias (2013) Analysis of Heat Gain in Computer Laboratory and Excellent Centre by using CLTD/CLF/SCL Method. Procedia Engineering, 53 . pp. 655-664. ISSN 1877-7058

Syahida Asma , Ab Aziz (2013) Road defect causes by underground infrastructure installation. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Syahidah Nafisa, Abdul Malik (2013) Development of graphical user interface (GUI) for bearing fault detection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syahirah, Razib (2013) Effect of particle size on xylose, glucose and arabinose production from oil palm trunk. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Syahrul A. C., Abdullah and Zainal H. C., Soh and Kamal Z., Zamli (2013) Variable-Strength Interaction for T-Way Test Generation Strategy. International Journal of Advances in Soft Computing and Its Application (Int. J. Advance Soft Compu. Appl.), 5 (3). pp. 65-74. ISSN 2074-8523

Syahrul Ramadhan, Ahmad Kamal Ariffin (2013) Computation of solar radiation heat gain in analysing energy efficient operation of an air-conditioning system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Syahrulhazwan , Shamsuddin (2013) A study of responsibility and performance of project management consultant (PMC) in the construction industry in Malaysia (residential project). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Syaidatul Akma, Bahani (2013) The relationship between job satisfaction and job performance : a case study of a malaysian electronic organization. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Syamimi Hazirah, Busro (2013) Interactive driver education curriculum (idec) courseware for illiterate user. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Syamimi Soliha, Mohd (2013) Construction of the sunpath diagrams for Pekan area for simulating the solar radiation effects to a building. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syamsul, Abdullah and Z., Man and L., Ismail and A., Maulud and M. A., Bustam (2013) Ionic Liquids Classification for Fuel Desulphurization. International Journal of General Engineering and Technology (IJGET), 2 (2). pp. 29-38. ISSN 2278-9928

Syamsul, Abdullah and Z., Man and M. A., Bustam (2013) Investigation on Aromaticity Index and Double-Bond Equivalent of Aromatic Compounds and Ionic Liquids for Fuel Desulphurization. Journal of Chemistry . pp. 1-7.

Syarifah, Yunus and N. R., Abdullah and R., Mamat and A. A., Rashid (2013) An Overview of Palm, Jatropha & Algae as a Potential Biodiesel Feedstock in Malaysia. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online)

Syazwan, Msar (2013) Bengkel ADD medium perkasa pengajaran. Berita Harian .

Syazwana, Mohd Zabidi (2013) Finite element method of electromagnetic energy harvester : simple beam-mass system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Syazwana , Mohd Sukri (2013) Sugarcane bagasse ash as replacement of cement mortar. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Syazwani, Sapiee (2013) The Extraction of Anthocyanin From Clitoria Ternatea (Blue Pea Flower) by Using Spray Dryer. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Syed Mohd Nor Irsyad, Sayed Mohd Nordin (2013) Experimental study of rapid prototyping of manufacturing plastic product using response surface methodology. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Syed Mohd Saufi, Tuan Chik and Fee, Conan J. (2013) Mixed Matrix Membrane Chromatography Based on Hydrophobic Interaction for Whey Protein Fractionation. Journal of Membrane Science, 444 . pp. 157-163. ISSN 0376-7388

Syed Muhammad , Syed Kamil (2013) Evaluation of California bearing ratio of Kuantan clayey soils stabilized by recycled and reuse material mixed with portland cement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Syed Musa Kazim , Syed Zainal Abidin (2013) Development of solar powered mobile robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Syifak Izhar, Hisham and Jasni, Mohamad Zain and Afifah Nailah, Muhamad and Gran, Badshah (2013) Localization Watermarking for Authentication of Text Images in Quran. In: 2013 Taibah University International Conference on Advances in Information Technology for the Holy Quran and Its Sciences, 22-25 December 2013 , Taibah University, Madinah, Saudi Arabia. pp. 1-6.. ISBN 978-1-4799-2822-4

Syifak Izhar, Hisham and Afifah Nailah, Muhamad and Jasni, Mohamad Zain and Badshah, Gran and Nurul Wahidah, Arshad (2013) Digital Watermarking for Recovering Attack Areas of Medical Images using Spiral Numbering. In: Proceeding of International Conference on Electronics, Computer and Computation (ICECCO 2013), 7-9 November 2013 , Ankara. pp. 285-288..

Syifak Izhar, Hisham and Liew, Siau-Chuin and Jasni, Mohamad Zain (2013) A Quick Glance at Digital Watermarking in Medical Images Technique Classification, Requirements, Attacks and Application of Tamper Localization. Biomedical Engineering Research (BER), 2 (2). pp. 79-87. ISSN 2306-6008 (Print); 2306-5990 (Online)

Sylvia, Philip (2013) Transesterification of Castor Oil to Biodiesel by Using Magnesium Oxide as Solid-Base Catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Syukran Hakim, Norazman (2013) Study on an application of bioengineering by layer TIRF measurement. Masters thesis, Tokyo University of Science.

T

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2013) Estimation of Heat Transfer and Pressure Drop in an In-Line Flat Tubes Bundle by Radial Basis Function Network (RBFN). In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-8..

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2013) A Numerical Study Laminar Forced Convection of Air for In-Line Bundle of Cylinders Crossflow. Asian Journal of Scientific Research, 6 (2). pp. 217-226. ISSN 1992-1454

Tan, Suat Hian and Dhurga, Devi Rajaratanam (2013) Antioxidant and Antibacterial Properties on Different Tissues of Syzygium Aromaticum. In: Proceedings of International Conference on Sciences and Social Sciences 2013 : Research and Development Sustainable Life Quality, 18-19 July 2013 , Rajabhat Maha Sarakham University, Thailand. pp. 1-8..

Tan, Beng Leng (2013) Development of plug-in air powered four wheels motorcycle drivetrain control unit. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tan, See Ying (2013) Microalgae for tertiary treatment of palm oil mill effluent (pome)- effect of light penetration and kinetic study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tan, Soon Wea (2013) Design and fabrication of two degree of freedom free vibration test rig : coordinate coulping. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Tan, Suat Hian and Maziah, Mahmood (2013) Effect of Precursors on Flavonoid Production in Pegaga Cell Suspension Cultures. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Tan, Suat Hian and Maziah, Mahmood and Ariff, Arbakariya (2013) Synergism Effect Between Inoculum Size and Aggregate Size on Flavonoid Production In Centella Asiatica (L.) Urban (Pegaga) Cell Suspension Cultures. International Journal of Research in Engineering and Technology (IJRET), 2 (8). pp. 244-253. ISSN 2321-7308 (print); 2319-1163 (online)

Tan , Boon Aik (2013) Study the applied voltage and wire speed influences on machining aluminium alloy 6061 using wire-EDM process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Tan Gui, Jiu (2013) Medical Image Watermarking Scheme Using 13 Bits Enhanced Block Average Intensity. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Tan Ni, King (2013) Flow Study on Medium Size Pipeline Testing Loop. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Tan Poh, Yee (2013) Interior design using augmented reality. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Tan Yang, Hong (2013) Catalytic Wet Air Oxidation of Wastewater Containing Acetic Acid. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Mohd Farid, Zainudin (2013) Investigation of Potential Waste Insulating Material Properties with Different Heat Transfer Fluid for Thermal Storage Application. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

Tatt, Chan Wei (2013) Kinetic study of catalytic glycolysis of PET wastes with zinc acetate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Taufik, Abu Bakar (2013) Conceptual 3D design of batch distillation column by using AVEVA PDMS. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tay, Joo Hui and Yee, Fong See and Han, Wau Leong and Norhayati, Mohd Tahir (2013) Distribution Of N-Alkanes In Surface Soils Of Kuantan City, Pahang, Malaysia. In: International Conference on Sciences and Social Sciences 2013: Research and Development for Sustainable Life Quality, 18-19 July 2013 , Rajabhat Maha Sarakham University, Thailand. pp. 1-6.. (Unpublished)

Tee Chor, Shen (2013) Training kits for JPJ. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Teh, Gek Yu (2013) Engineering properties of concrete coarsely crushed cockle shell as coarse aggregate replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Teh, Swee Ing (2013) Vibration analysis of vehicle engine mounting. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Teh, Weng Khuin (2013) Notch effect to the fatigue life. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Teng, Lik Ching (2013) Evaluating the performance of the operation at the sawmill production company. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Tengku Khamanur Azma, Tg. Mohd Zamri (2013) Melastoma malabathricum L . natural preservatives business plan. Masters thesis, Universiti Malaysia Pahang.

Tengku Mohd Muaz, Tengku Zakaria (2013) Feasibilty study of dissilmilar metal welding between galvanized steel and alluminium alloys using metal inert gas welding(MIG). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tengku Mohd Nurul Naim, Tengku Jaapar (2013) Photo-reduction of Carbon Dioxide Using Zns Supported Kaolin in a Photo Catalytic Batch Reactor System. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Teoh, S. J. and R. A., Bakar and Gan, Leong Ming (2013) Computational Analysis on Plug-in Hybrid Electric Motorcycle Chassis. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10.. (Unpublished)

Tey, Fanny Pei Boon (2013) Power consumption of dosmetic refrigerator using nanoparticles Al2O3 lubricant mixture. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Thaibah , Ali (2013) The optimization of co2 sequestration by microalgae in pome medium. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Thamir K., Ibrahim and M. M., Rahman (2013) Effects of Isentropic Efficiency and Enhancing Strategies on Gas Turbine Performance. Journal of Mechanical Engineering and Sciences (JMES) , 4 . pp. 383-396. ISSN 2289-4659 (print); 2231-8380 (online)

Tharmathas, Alagappan (2013) Microwave assisted thermal cracking of castor oil with zeolite as catalyst for possible biofuel production. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Thivagar, Sugumaran (2013) Use of Carbon Fibers to Enhance the Physical and Mechanical Properties of Wood Composites. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Thiwaan Rao, Narasimma Naidu (2013) Cfd simulation of multiple array arrangement of micro hydro power turbines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tiong, Chiong Chii (2013) Investigation of the joining of acrylic by low power CO2 laser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Toudeshki, Arash and Mariun, Norman and Hashim, Nizam and Noor Izzri, Abdul Wahab and Hojabri, Mojgan and Ali Sai’d, Yunusa and Saadatian, Omidreza and Muhammad, Mansoor and Saadatian, Elham (2013) Derivation of Load Peak Voltage, Power Consumption and Potential Energy Management in a Thyristor Controlled Marx Impulse Generator for Capacitor Discharge Application. Majlesi Journal of Energy Management, 2 (2). pp. 1-5.

Tracey Chia Ai, Quin (2013) Industrial training e-logbook system. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Tuan Mohammad Yusoff, Tuan Ya and Sabir, O. and Norhafizan, Ahmed and Y., Nukman (2013) A Two Pressure-Velocity Approach for Immersed Boundary Methods in Three Dimensional Incompressible Flows. In: International Conference on Mechanical Engineering Research (ICMER2013),, 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Tuan Noordiyana , Tuan Ismail (2013) Structural characteristics of chasis model for a technology demonstrator. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

U

UMP, . (2013) 102 penuntut UMP berjaya ikuti program degree++. Utusan Malaysia .

UMP, . (2013) 200 pelajar sertai program kecemerlangan. Metro .

UMP, . (2013) 2000 penuntut UMP sertai syarahan umum. Berita Harian .

UMP, . (2013) 36 mahasiswa dekati masyarakat melalui Program Kembara UMP 2013. Utusan Malaysia .

UMP, . (2013) 385 pelajar baru mendaftar di UMP. Berita Harian .

UMP, . (2013) 47 dapat kelengkapan sekolah. Harian Metro .

UMP, . (2013) 500 hadiri kolokium Pak Sako di UMP. Utusan Malaysia .

UMP, . (2013) 53 pelajar UMP ikuti kem tingkat kemahiran bahasa Inggeris. Utusan Malaysia .

UMP, . (2013) 60 penuntut UMP kayuh 60 kilometer. Metro .

UMP, . (2013) ASM, UMP anjur Seminar Antarabangsa Nadir Bumi. Utusan Malaysia .

UMP, . (2013) Abu Azam terima Ijazah kehormat Doktor Falsafah Kejuruteraan Kimia. Utusan Malaysia .

UMP, . (2013) Daing Nasir kekal naib canselor UMP. Kosmo .

UMP, . (2013) Dr Daing Nasir dilantik semula Naib Canselor UMP. Metro .

UMP, . (2013) Dr.Daing Nasir azam terus bawa kecemerlangan UMP. Utusan Malaysia .

UMP, . (2013) Dua pelajar UMP ditemui lemas. Berita Harian .

UMP, . (2013) Hadiah sanjungan UMP iktiraf pelajar. Berita Harian .

UMP, . (2013) Hari Sains Universiti Malaysia Pahang semai pelajar minat bidang sains. Utusan Malaysia .

UMP, . (2013) Ilmu pengetahuan asas pembentukan masyarakat. Utusan Malaysia .

UMP, . (2013) Impian Muhd Fakhrur Razi tercapai. Berita Harian .

UMP, . (2013) Jambori Remaja Muslim semai bakat kepimpinan 120 calon Sijil Pelajaran Malaysia. Utusan Malaysia .

UMP, . (2013) KPT wujud sistem pengesanan graduan. Berita Harian .

UMP, . (2013) Kajian UMP menang anugerah. Berita Harian .

UMP, . (2013) Karnival kerjaya di Gambang hari ini. Utusan Malaysia .

UMP, . (2013) Kelab In-Smartive UMP terus berbakti. Berita Harian .

UMP, . (2013) Kerjasama UMP dengan tiga universiti di Asia. Utusan Malaysia .

UMP, . (2013) Lebih 200 warga UMP raikan sambutan Bulan Kemerdekaan. Utusan Malaysia .

UMP, . (2013) MBM,UMP jalin kerjasama latih pakar tempatan. Berita Harian .

UMP, . (2013) Mashitah TNC baharu UMP. Utusan Malaysia .

UMP, . (2013) Menyelami kehidupan warga kampung. Berita Harian .

UMP, . (2013) Mercedes mahu tingkat rakyat tempatan. Utusan Malaysia .

UMP, . (2013) Mercedes-Benz Malaysia ambil graduan sebagai eksekutif. Kosmo .

UMP, . (2013) Murid kerdil perlu kerusi khas. Harian Metro .

UMP, . (2013) Pelajar IPT minta jumlah BB1M ditingkatkan. Berita Harian .

UMP, . (2013) Pelajar diminta guna BB1M di kedai koperasi universiti. Utusan Malaysia .

UMP, . (2013) Pensyarah IUG lawat IPT Malaysia. Berita Harian .

UMP, . (2013) Penuntut UMP bimbing murid SK Beserah. Utusan Malaysia .

UMP, . (2013) Penuntut UMP raih 2 anugerah di Hunan, China. Utusan Malaysia .

UMP, . (2013) Penyelidik UMP diiktiraf. Utusan Malaysia .

UMP, . (2013) Program baru UMP. Uutsan Malaysia .

UMP, . (2013) Sidek Baba beri ucapan di UMP. Utusan Malaysia .

UMP, . (2013) Suasana raya. Berita Harian .

UMP, . (2013) Syarahan UMP berkaitan Lynas dihadiri 500 peserta. Utusan Malaysia .

UMP, . (2013) TalentCorp anjur Pameran Kerjaya Sektor Tumpuan Utama di UMP. Berita Harian .

UMP, . (2013) Tamat kursus. Sinar Harian .

UMP, . (2013) Terima anugerah berkat sabar. Metro .

UMP, . (2013) Transformasi ubah landskap sosioekonomi. Utusan Malaysia .

UMP, . (2013) Tujuh buaya berjemur jadi tarikan. Berita Harian .

UMP, . (2013) Tukun tiruan di perairan Tioman. Berita Harian .

UMP, . (2013) UMP anjur Karnival Expoconvo'13, Sabtu ini. Utusan Malaysia .

UMP, . (2013) UMP di Kampung Budu. Berita Harian .

UMP, . (2013) UMP meterai MoU dengan Mercedes-Benz. Utusan Malaysia .

UMP, . (2013) UMP pantau aktiviti perkilangan Lynas. Metro .

UMP, . (2013) UMP perkenalkan Format Ghani untuk pelajar sekolah. Utusan Malaysia .

UMP, . (2013) UMP rangkul 13 pingat di Ekspo Teknologi Malaysia. Utusan Malaysia .

UMP, . (2013) UMP semarak semangat patriotisme. Berita Harian .

UMP, . (2013) UMP, ECERDC jayakan program Empower Mahkota ECER. Utusan Malaysia .

UMP, . (2013) UiTM, UMP rebut tahkta juara hari ni. Utusan Malaysia .

UMP, . (2013) Warga UMP digesa terus cipta kejayaan. Utusan Malaysia .

UMP, . (2013) Warga universiti perlu pergiat aktiviti penyelidikan, inovasi. Metro .

UMP, . (2013) Yakin lahir tenaga kerja berdaya saing, mahir. Sinar .

UMP, FSKKP (2013) Effective persistence layer synchronous replication heterogonous database. Bit@FSKKP . pp. 8-9. ISSN 1985-7969

UMP, FSKKP (2013) International Conference on Software Engineering Computer Systems 2013. Bit@FSKKP . pp. 32-33. ISSN 1985-7969

UMP, FSKKP (2013) Smart Attendance Management System (SAMS). Bit@FSKKP . p. 6. ISSN 1985-7969

UMP, FSKKP (2013) Wireless and Configurationless iClassroom System. Bit@FSKKP . pp. 4-5. ISSN 1985-7969 (Unpublished)

UMP, LIB (2013) 500 meriahkan Malam Antarabangsa UMP. Utusan Malaysia .

UMP, LIB (2013) 75 penuntut UMP cat Surau Haji Jaafar. Utusan Malaysia .

UMP, LIB (2013) Cipta perisian tulisan jawi. Harian Metro .

UMP, LIB (2013) Pensyarah cipta aplikasi tulisan jawi. Berita Harian .

UMP, LIB (2013) Perhimpunan haram musnah masa depan mahasiswa. Sinar Harian .

UMP, LIB (2013) 'Saya percaya mereka bijak'. Harian Metro .

UMP, LIB (2013) UMP adakan perarakan sambutan Maulidur Rasul. Utusan Malaysia .

UMP, LIB (2013) UMP bangunkan aplikasi indeks kebersihan air. Utusan Malaysia .

UMP, LIB (2013) UMP bantu penuntut terlibat banjir. Utusan Malaysia .

UMP, LIB (2013) UMP bantu pulihara hidupan marin. Berita Harian .

UMP, LIB (2013) UMP jalin kerjasama bersama MTDS. CREATE . p. 45. ISSN 1823-7487

UMP, LIB (2013) UMP, MTDS jalin kerjasama pendidikan. Harian Metro .

UMP, PNC (2013) 1,000 anak pokok ditanam sempena Hari Hutan Antarabangsa. CREATE . p. 13. ISSN 1823-7487

UMP, PNC (2013) 100 berkonvoi motosikal dekati masyarakat. CREATE . p. 53. ISSN 1823-7487

UMP, PNC (2013) 130 staf terima hadiah kecemerlangan. CREATE . p. 7. ISSN 1823-7487

UMP, PNC (2013) 164 pelajar aliran Sains sertai program kecemerlangan akademik. CREATE . p. 17. ISSN 1823-7487

UMP, PNC (2013) 179 calon SPM pelajari Format Ghani untuk mudah ingat pelajaran. CREATE . p. 20. ISSN 1823-7487

UMP, PNC (2013) 2,095 graduan terima ijazah dan diploma dalam Majlis Konvokesyen Ke-8. CREATE . p. 6. ISSN 1823-7487

UMP, PNC (2013) 27 kontinjen staf UMP sertai perarakan Maulidur Rasul. CREATE . p. 48. ISSN 1823-7487

UMP, PNC (2013) 3 Penyelidik harumkan nama UMP. CREATE . p. 28. ISSN 1823-7487

UMP, PNC (2013) 385 pelajar baharu mendaftar peringkat Diploma. CREATE . p. 15. ISSN 1823-7487

UMP, PNC (2013) 4 pelajar Mekatronik ditawar penempatan ke Jerman. CREATE . p. 18. ISSN 1823-7487

UMP, PNC (2013) 4 pelajar lakar kejayaan dalam penyelidikan. CREATE . p. 30. ISSN 1823-7487

UMP, PNC (2013) 40 anggota Wataniah tamat Kursus KADAR. CREATE . p. 54. ISSN 1823-7487

UMP, PNC (2013) 40 ribu pengunjung banjiri Jom Masuk U Zon 7. CREATE . pp. 14-15. ISSN 1823-7487

UMP, PNC (2013) 5 pelajar terima bantuan banjir. CREATE . p. 50. ISSN 1823-7487

UMP, PNC (2013) 5 pelajar terima bantuan banjir. CREATE . p. 50. ISSN 1823-7487 (Unpublished)

UMP, PNC (2013) 600 pelajar sekolah meriahkan Karnival Bahasa Tamil. CREATE . p. 52. ISSN 1823-7487

UMP, PNC (2013) 73% keluar mengundi pilih barisan kepimpinan mahasiswa UMP. CREATE . p. 46. ISSN 1823-7487

UMP, PNC (2013) ASM, UMP anjur Seminar Antarabangsa Nadir Bumi. CREATE . p. 23. ISSN 1823-7487

UMP, PNC (2013) Anugerah Cendekia Bitara hargai penyelidik dan pensyarah cemerlang. CREATE . pp. 6-7. ISSN 1823-7487

UMP, PNC (2013) Azwan harumkan nama UMP rangkul Ikon Varsiti BH. CREATE . p. 16. ISSN 1823-7487

UMP, PNC (2013) Bicara Merdeka semarakkan sambutan Bulan Kemerdekaan. CREATE . p. 43. ISSN 1823-7487

UMP, PNC (2013) ‘Big Cleaning Day’ pupuk kesedaran warga kampus mengenai kebersihan. CREATE . p. 9. ISSN 1823-7487

UMP, PNC (2013) Buku Program Disebalik Tabir Upin & Ipin Dari Kaca Mata Tok Dalang. Program UMP . pp. 1-6. (Unpublished)

UMP, PNC (2013) CAIC anjur perkongsian amalan terbaik Pengajaran & Pembelajaran. CREATE . p. 21. ISSN 1823-7487

UMP, PNC (2013) CITREX pamer 179 penyelidikan UMP. CREATE . p. 30. ISSN 1823-7487

UMP, PNC (2013) De Kuala Cafe lambang kerjasama ECER dan UMP. CREATE . p. 5. ISSN 1823-7487

UMP, PNC (2013) Engr. Abdul Syukor terima Anugerah Tertinggi World Inventor Grand Order of Merit 2013. CREATE . p. 23. ISSN 1823-7487

UMP, PNC (2013) FTek anjur Program Ramah Mesra Bersama Industri. CREATE . p. 17. ISSN 1823-7487

UMP, PNC (2013) Festival Bayu Kenyalang perkenal kepelbagaian budaya etnik. CREATE . p. 57. ISSN 1823-7487

UMP, PNC (2013) Haida Akmar diamanahkan kendali projek jutaan ringgit. CREATE . p. 70. ISSN 1823-7487

UMP, PNC (2013) Hari Raya disambut meriah. CREATE . p. 11. ISSN 1823-7487

UMP, PNC (2013) Ibu 6 tahun temani anak kurang upaya terima pengiktirafan UMP. CREATE . pp. 4-5. ISSN 1823-7487

UMP, PNC (2013) In-Smartive semarakkan kolaborasi UMP-UTY. CREATE . p. 51. ISSN 1823-7487

UMP, PNC (2013) International Night perkenal budaya dan tradisi antarabangsa. CREATE . p. 48. ISSN 1823-7487

UMP, PNC (2013) Jelajah Ramadan RTM - UMP dekati masyarakat Kuala Pahang. CREATE . p. 47. ISSN 1823-7487

UMP, PNC (2013) KTAR dan Taylor’s University juara Bola Keranjang Tiga Lawan 3. CREATE . p. 56. ISSN 1823-7487

UMP, PNC (2013) Karnival Kerjaya dapat sambutan mahasiswa UMP. CREATE . p. 55. ISSN 1823-7487

UMP, PNC (2013) Kefahaman Sains dan Teknologi terhadap pembangunan industri kimia. CREATE . p. 16. ISSN 1823-7487

UMP, PNC (2013) Kembali kepada asas - NC. CREATE . pp. 8-9. ISSN 1823-7487

UMP, PNC (2013) Kembara Amal Bermotosikal rai anak yatim. CREATE . p. 13. ISSN 1823-7487

UMP, PNC (2013) Kembara UMP bertemu masyarakat Chemomoi. CREATE . p. 50. ISSN 1823-7487

UMP, PNC (2013) Keperluan kejuruteraan teknologi penuhi kehendak industri. CREATE . p. 16. ISSN 1823-7487

UMP, PNC (2013) Kolokium Pak Sako bincang Transformasi Pendidikan di Malaysia. CREATE . p. 13. ISSN 1823-7487

UMP, PNC (2013) Lebih 6,000 sukarelawan bantu mangsa banjir Kuantan. CREATE . p. 44. ISSN 1823-7487

UMP, PNC (2013) MB Johor tawar kerjasama dengan UMP. CREATE . p. 6. ISSN 1823-7487

UMP, PNC (2013) MTUN anjur persidangan universiti teknikal. CREATE . p. 29. ISSN 1823-7487

UMP, PNC (2013) Mahasiswa PERSIS bantu pelajar sekolah tingkat motivasi. CREATE . p. 24. ISSN 1823-7487

UMP, PNC (2013) Mahasiswa UMP kuasai bacaan Al-Quran bersanad. CREATE . p. 42. ISSN 1823-7487

UMP, PNC (2013) Mahasiswa baharu lafaz ikrar janji tunai amanah. CREATE . p. 19. ISSN 1823-7487

UMP, PNC (2013) Mahasiswa berkayuh 60 km sambil melawat lombong bijih timah. CREATE . p. 49. ISSN 1823-7487

UMP, PNC (2013) Mahasiswa jelajah kampung dalam Kembara Pahang FM bersama UMP. CREATE . p. 52. ISSN 1823-7487

UMP, PNC (2013) Majlis Jasa Dikenang hargai sumbangan pegawai universiti. CREATE . p. 42. ISSN 1823-7487

UMP, PNC (2013) Majlis Makan Malam erat hubungan warga kerja UMP. CREATE . p. 34. ISSN 1823-7487

UMP, PNC (2013) Menteri KPT galak mahasiswa sertai program khidmat masyarakat. CREATE . p. 12. ISSN 1823-7487

UMP, PNC (2013) Menteri Mentor UMP serah BB1M. CREATE . p. 10. ISSN 1823-7487

UMP, PNC (2013) Misi Kemanusiaan “We Love We Care” laksana 13 projek pembangunan pelajar Kemboja. CREATE . p. 40. ISSN 1823-7487

UMP, PNC (2013) Myrza Fasha kongsi pengalaman ekspedisi Everest. CREATE . p. 41. ISSN 1823-7487

UMP, PNC (2013) NC diberi penghormatan sampaikan anugerah di Majlis Graduasi MRSM. CREATE . p. 21. ISSN 1823-7487

UMP, PNC (2013) NC lancar Majlis Graduasi Prauniversiti MSAB. CREATE . p. 20. ISSN 1823-7487

UMP, PNC (2013) NC menang Anugerah Buku Negara 2013. CREATE . p. 22. ISSN 1823-7487

UMP, PNC (2013) Naib Canselor adakan lawatan ke China. CREATE . p. 43. ISSN 1823-7487

UMP, PNC (2013) Naib Canselor rasmi Tunas Saintis MRSM peringkat Kebangsaan. CREATE . p. 20. ISSN 1823-7487

UMP, PNC (2013) PBMSK sumbang kerusi untuk kemudahan pelajar sekolah. CREATE . p. 39. ISSN 1823-7487

UMP, PNC (2013) PEKA 2 anjur Kem Jambori Remaja Muslim. CREATE . p. 50. ISSN 1823-7487

UMP, PNC (2013) Pelajar FKKSA menang pertandingan Chem-E-Car anjuran IEM. CREATE . p. 55. ISSN 1823-7487

UMP, PNC (2013) Pelajar UMP catat sejarah tawan puncak Gunung Everest. CREATE . pp. 4-5. ISSN 1823-7487

UMP, PNC (2013) Pelajar masuk desa dekati komuniti Kampung Budu. CREATE . p. 45. ISSN 1823-7487

UMP, PNC (2013) Pelajar perlu manfaatkan bantuan Netbook 1 Malaysia. CREATE . p. 33. ISSN 1823-7487

UMP, PNC (2013) Pengalaman baharu 30 pelajar antarabangsa sambut raya di Malaysia. CREATE . p. 19. ISSN 1823-7487

UMP, PNC (2013) Pensyarah FSTI rangkul Anugerah Tesis PhD Terbaik 2013. CREATE . p. 16. ISSN 1823-7487

UMP, PNC (2013) Penyelidik UMP terus cemerlang di SIIF Korea. CREATE . p. 25. ISSN 1823-7487

UMP, PNC (2013) Penyelidik muda cipta kejayaan menang 4 pingat dan 2 anugerah khas dalam INOVA 2013. CREATE . p. 28. ISSN 1823-7487

UMP, PNC (2013) Penyelidikan UMP diiktiraf di Amerika Syarikat. CREATE . p. 25. ISSN 1823-7487

UMP, PNC (2013) Perasmian Karnival Expoconvo disambut meriah. CREATE . p. 54. ISSN 1823-7487

UMP, PNC (2013) Perpustakaan anjur Program Bulan Membaca. CREATE . p. 60. ISSN 1823-7487

UMP, PNC (2013) Perpustakaan ke arah pensijilan MS IS0 9001:2008 pada 2015. CREATE . p. 65. ISSN 1823-7487

UMP, PNC (2013) Persatuan MATAHARI sambut ulang tahun ke-3. CREATE . p. 35. ISSN 1823-7487

UMP, PNC (2013) Persatuan Wanita UMP hulur sumbangan bantu anak yatim dan miskin Nur Iman. CREATE . p. 38. ISSN 1823-7487

UMP, PNC (2013) Program Profesor Bersama Masyarakat manfaatkan perkongsian kepakaran. CREATE . p. 24. ISSN 1823-7487

UMP, PNC (2013) Program Selangkah ke UMP suntik semangat pelajar sekolah cipta kejayaan. CREATE . p. 51. ISSN 1823-7487

UMP, PNC (2013) Sinergi berterusan UMP dan ECERDC tingkat pencapaian akademik pelajar luar bandar. CREATE . p. 26. ISSN 1823-7487

UMP, PNC (2013) Syarahan Umum Profesor bincang kebolehpasaran graduan. CREATE . p. 12. ISSN 1823-7487

UMP, PNC (2013) Syarahan umum antarabangsa bincang kejuruteraan perniagaan. CREATE . p. 18. ISSN 1823-7487

UMP, PNC (2013) UMP anjur Seminar Pengajaran Cemerlang dalam Pendidikan Tinggi. CREATE . p. 15. ISSN 1823-7487

UMP, PNC (2013) UMP anjur Wacana Ilmu Profesor Bersama Masyarakat. CREATE . p. 19. ISSN 1823-7487

UMP, PNC (2013) UMP anjur kejohanan sukan antara jabatan. CREATE . p. 52. ISSN 1823-7487

UMP, PNC (2013) UMP bangunkan modul transformasi belia. CREATE . p. 7. ISSN 1823-7487

UMP, PNC (2013) UMP bantu pulihara hidupan marin. CREATE . p. 49. ISSN 1823-7487

UMP, PNC (2013) UMP hargai penulis tamu sumbang kepakaran bersama masyarakat. CREATE . p. 40. ISSN 1823-7487

UMP, PNC (2013) UMP jalin kerjasama dengan 4 IPT Turki. CREATE . p. 11. ISSN 1823-7487

UMP, PNC (2013) UMP jalin kerjasama dengan Mercedez Benz. CREATE . p. 42. ISSN 1823-7487

UMP, PNC (2013) UMP jalinan kerjasama dalam program pembangunan kemasyarakatan PKNP. CREATE . p. 46. ISSN 1823-7487

UMP, PNC (2013) UMP lancar Hari Koperasi Siswa. CREATE . p. 45. ISSN 1823-7487

UMP, PNC (2013) UMP menang Anugerah Platinum dan 5 Pingat Emas dalam Reka Cipta BIS London. CREATE . p. 24. ISSN 1823-7487

UMP, PNC (2013) UMP peneraju Pusat Kecemerlangan Industri Bioteknologi. CREATE . p. 4. ISSN 1823-7487

UMP, PNC (2013) UMP praktik ilmu di luar kelas. CREATE . p. 55. ISSN 1823-7487

UMP, PNC (2013) UMP rangkul 18 pingat dan anugerah khas dalam ITEX 2013. CREATE . p. 26. ISSN 1823-7487

UMP, PNC (2013) UMP terima 1,656 mahasiswa baharu. CREATE . p. 18. ISSN 1823-7487

UMP, PNC (2013) UMP terima 70 ribu sumbangan zakat Etiqa bantu ringankan beban pelajar. CREATE . p. 33. ISSN 1823-7487

UMP, PNC (2013) UMP terima sijil ISO ISO/IEC 27001 perkukuh keselamatan ICT. CREATE . p. 47. ISSN 1823-7487

UMP, PNC (2013) UMP terima sumbangan 30 ribu zakat Bank Islam Info Sekitar Kampus. CREATE . p. 36. ISSN 1823-7487

UMP, PNC (2013) UMP, AELB jalin kerjasama dalam kawal seliaan keselamatan sinaran dan nuklear. CREATE . p. 34. ISSN 1823-7487

UMP, PNC (2013) UMP, Alumni hargai media dan rai anak yatim. CREATE . p. 8. ISSN 1823-7487

UMP, PNC (2013) UMP, ECERDC dan BiotechCorp bangunkan Taman Bio-Aromatik Pahang. CREATE . p. 32. ISSN 1823-7487

UMP, PNC (2013) UMP, Kolej KLIA meterai kerjasama dalam bidang keselamatan dan kesihatan pekerjaan. CREATE . p. 38. ISSN 1823-7487

UMP, PNC (2013) UMP, NAHRIM jalin kerjasama erat Kejuruteraan Hidraulik dan Rawatan Air Bersih. CREATE . p. 39. ISSN 1823-7487

UMP, PNC (2013) UMP, PKNP turun padang anjur Seminar Transformasi Masyarakat dan Motivasi Pelajar. CREATE . p. 41. ISSN 1823-7487

UMP, PNC (2013) UMP, UoS anjur simposium bincang pengurusan lembangan air sungai. CREATE . p. 29. ISSN 1823-7487

UMP, PNC (2013) UMP– RTM terus jelajah kampung dekati masyarakat. CREATE . p. 53. ISSN 1823-7487

UMP, PNC (2013) UPIN dan IPIN dalam Syarahan Umum Kebangsaan UMP. CREATE . p. 14. ISSN 1823-7487

UMP, PNC (2013) Universiti memasyarakatkan pendidikan. CREATE . p. 25. ISSN 1823-7487

UMP, PNC (2013) Warga UMP bantu mangsa banjir dalam Gotong-Royong Perdana. CREATE . pp. 8-9. ISSN 1823-7487

UMP, PNC (2013) Warga UMP sumbang 12 ribu bantu dana Tabung Palestin-Gaza. CREATE . p. 11. ISSN 1823-7487

UMP, PNC (2013) Warga kerja UMP rai sambutan Bulan Kemerdekaan. CREATE . p. 12. ISSN 1823-7487

Uddin, M. Rakib and Ferdous, Kaniz and Md. Arifur, Rahman and Anup, K. Roy and Khan, Maksudur R. (2013) Amylatic Activity of Agaricus and Moulds for the Production of Bioethanol. Chemical Engineering and Science, 1 (1). pp. 7-11. ISSN ISSN (Print): 2328-7381 ISSN (Online): 2328-7373

Ul haq, Riaz and Norrozila, Sulaiman and Muhammad, Alam (2013) A Survey Of Supervised Machine Learning In Wireless Sensor Network: A Power Management Perspective. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Ul haq, Riaz and Norrozila, Sulaiman and Muhammad, Alam (2013) A Survey of Stochastic processes in Wireless Sensor Network: a Power Management Prospective. In: 3rd International Conference on Software Engineering & Computer Systems (ICSECS - 2013), 20-22 Ogos 2013 , Universiti Malaysia Pahang. pp. 1-10.. (Unpublished)

Umi Kalsom, Mohamad (2013) Lap joint dissimilar welding of aluminium and steel sheet using tig welding. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Umi Kalsom, Mohamad (2013) Lap joint dissimilar welding of aluminium and steel sheet using tig welding. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ummu Kulthum, Jamaludin (2013) Developing and validating a new comprehensive glucose-insulin pharmacokinetics and pharmacodynamics model. PhD thesis, University of Canterbury, Christchurch, New Zealand .

V

Varma, Ramaraju Ramgopal and Abdullah, Ibrahim (2013) Instrumentation to Measure the Heat Transfer Coefficients in an Automobile Radiator. Journal Of Innovation in Electronics and Communication, 3 (2). pp. 24-27. ISSN 2240-9946

Varma, Ramaraju Ramgopal and Abdullah, Ibrahim and Reddy, B. Ravinder (2013) Evaluating the Strength of the Friction Stir Welded Joints at Various Rotational Speeds. Applied Mechanics and Materials, 446 - . pp. 312-315. ISSN 1662-7482

Veloo Kutty, Rajaletchumy and Feng, Si-Shen (2013) Cetuximab Conjugated Vitamin E TPGS Micelles for Targeted Delivery of Docetaxel for Treatment of Triple Negative Breast Cancers. Biomaterials, 34 (38). pp. 10160-10171. ISSN 0142-9612

Veyolla, Jaffrey (2013) Effect of clamping distance and voltage on weldability of dissimilar welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Vidhyadharan, Baiju and Izan Izwan, Misnon and Nurul Khayyriah, Mohd Zain and Radhiyah, Abd Aziz and M. M., Yusoff and Rajan, Jose (2013) "Green" -electrospun Metal Oxide Nanowires for High Performance Supercapacitors. In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. p. 1..

Vikinesh, Mariappan (2013) Production of Biodiesel From Microalgae Using Ultrasound. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Viknesh, Punichelvan (2013) Design and implementation of flywheel energy storage system for supporting critical load. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

W

W. B., Santoso and R. A., Bakar and Nur, A. (2013) Combustion Characteristics of Diesel-Hydrogen Dual Fuel Engine at Low Load. Energy Procedia, 32 . pp. 3-10. ISSN 1876-6102

Wan, Dong Hua (2013) Structural dynamic analysis of oil and gas transmission pipe. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Ahmad Syafiq , Wan Ghafar (2013) Modeling, simulation and experimental verification of variable parameter of suspension spring. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Wan Azlee, Wan Abdullah (2013) 8 delegasi UMT lawat PPKPK. CREATE . p. 36. ISSN 1823-7487

Wan Azlee, Wan Abdullah (2013) UMP semak Pelan Strategik 2011-2015 ukur tahap pencapaian. CREATE . p. 37. ISSN 1823-7487

Wan Azlee, Wan Abdullah (2013) Wacana Pengurusan bincang tadbir urus terbaik. CREATE . p. 37. ISSN 1823-7487

Wan Faizal, Wan Ishak (2013) Sikap pengguna buang sisa pepejal punca banjir kilat. Berita Harian, (30 Ja . p. 29.

Wan Faizal, Wan Ishak (2013) UMP mulai bincang rangka kerjasama dengan IUG Palestin. CREATE . p. 10. ISSN 1823-7487

Wan Faizal, Wan Ishak and Makky, Essam A. and Datusahlan, Mupit (2013) Biodegradation of Wastewater Oil Pollutants, Identification and Characterization: A Case Study - Galing River, Kuantan Pahang, Malaysia. International Journal of Bioscience, Biochemistry and Bioinformatics, 3 (6). pp. 579-582. ISSN 2010-3638

Wan Faizal, Wan Ishak and Nadiah, Mokhtar and Noor Suraya, Romali and Siti Fatimah, Che Osmi and Mohd Armi, Abu Samah (2013) Municipal Solid Waste Composition Study of Selected Area in Gambang, Pahang. IOP Conference Series: Earth and Environmental Science, 16 . 012-041. ISSN 1755-1315

Wan Faizal, Wan Ishak and Nasly, M. A. and Saher, F. N. and T. A. A., Kadir and N. K. E. M., Yahaya (2013) Managing Flood Water of Hill Torrents as Potential Source for Irrigation. Journal of Flood Risk Management, 7 (3). pp. 1-9. ISSN 1753-318X

Wan Humaiyah, Wan Mohamad (2013) Mechanism of reward for glass recycling activities in Kuantan community based on mpk redemption system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Wan Iryana, Wan Md Nor (2013) Fatigue behaviour of aluminium 6061 in tailor welded blank. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Ismail, Ibrahim and Mohd Riduwan, Ghazali and Lailatul Niza, Muhammad and Suliana, Ab Ghani and Nurul Azlina, Abdul Rahman and Norhasliza, Mohd Hatta (2013) Pekan Lightning Detection System (PLDS) and Data Validation with Lightning TNBR. In: 2nd International Conference on Electrical, Control and Computer Engineering (InECCE2013), 27-28 August 2013 , M.S Garden Hotel Kuantan, Pahang. .

Wan Ismail, Ibrahim and Mohd Riduwan, Ghazali and Suliana, Ab Ghani and Mohd Falfazi, Mat Yusof (2013) Development of Single-station Early Warning Lightning Alarm System. In: 2nd International Conference on Electrical, Control and Computer Engineering (InECCE2013), 27-28 August 2013 , M.S Garden Hotel Kuantan, Pahang. .

Wan Maseri, Wan Mohd (2013) The influence of appropriation of knowledge management system and intrinsic motivation on social capital in higher education institutions. PhD thesis, Universiti Malaysia Pahang.

Wan Mohamad Azam, Wan Mahmod (2013) A study on the effect of the flow rate on the power produced by the pico hydropower. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Afiq Asyraf , Wan Junoh (2013) Determination of fracture strain using stress relaxation method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Asyraf, Wan Mohd Razali (2013) The potential of damages induced by wind speed. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Wan Mohd Nazmi, Wan Abdul Rahman and Achmad Fauzi, Abdul Wahab (2013) Optimisation of Recycled High Density Polyethylene Pallet as Aggregate Replacement for Road Pavement. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-3..

Wan Mohd Nazmi, Wan Abdul Rahman and Achmad Fauzi, Abdul Wahab (2013) Green Pavement using Recycled Polyethylene Terephthalate (PET) as Partial Fine Aggregate Replacement in Modified Asphalt. Procedia Engineering, 53 . pp. 124-128. ISSN 1877-7058

Wan Mohd Syazwan , Wan Abdullah (2013) Desulfurization of model oil using imidazolium-based ionic liquids. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Muhammad Firdaus, Wan Sulaiman and Hamdan, Daniyal (2013) Modeling and Simulation of Photovoltaic Module with MPPT. In: Proceedings of the 2nd Annual International Conference on Sustainable Energy and Environmental Science (SEES 2013), 25-26 February 2013 , Singapore. pp. 98-103..

Wan Najibah, Mohamad (2013) Preparation of Ion Exchange Membrane Chromatography by Modification of Polyethersulfone Membrane Through UV Grafting of [2-(Acryloyloxy) Ethyl] Trimethyl Ammonium Chloride and Acrylic Acid Monomer. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Nazrul Helmy, Wan Mohd Zain (2013) 97 Pelajar SMASH dan SMAI sertai Projek Kilauan Mutiara. CREATE . p. 48. ISSN 1823-7487

Wan Nazrul Helmy, Wan Mohd Zain (2013) In-Smartive, Persatuan Matahari jayakan Projek Kilauan Mutiara. CREATE . ISSN 1823-7487

Wan Nazrul Helmy, Wan Mohd Zain (2013) Kem Interaksi Pemimpin Muda perkasakan jati diri pelajar sekolah. CREATE . p. 60. ISSN 1823-7487

Wan Nazrul Helmy, Wan Mohd Zain (2013) Projek Semaian Budi dekati warga RSK Bedong dan SEMUJI. CREATE . p. 58. ISSN 1823-7487

Wan Nazrul Helmy, Wan Mohd Zain (2013) Pupuk semangat sukarelawan mahasiswa. Berita Harian, (22 Ma . p. 30.

Wan Nazrul Helmy, Wan Mohd Zain (2013) Semaian Budi 3.0 inisiatif sulung Kelab In-Smartive di Arau. CREATE . p. 59. ISSN 1823-7487

Wan Norain, Awang Long (2013) Production of Methane Gas by Ultrasonic Membrane System (UMAS) Using Palm Oil Mill Effluent (POME) as a Substrate. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Nur AtiqaH, Wan Yusoff (2013) Biodelinification as Pretreatment to Acid Hydrolysis of Oil Palm Trunk (OPT) : Kinetic Study. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Nur Azhani , W. Samsudin and Kamarul Hawari, Ghazali and Mohd Falfazi, Mat Yusof (2013) Analysis of Motion Detection using Social Force Model. In: Proceeding of the International Conference on Artificial Intelligence and Computer Science 2013, 25-26 November 2013 , Bayview, Langkawi, Kedah. pp. 227-233..

Wan Nur Shakira Ain, Wan Ranizang (2013) Tamper localization for medical images using cyclic redundancy check (CRC). Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Wan Nur Syahidah, Wan Yusoff and Maman Abdurachman, Djauhari (2013) A Statistical Test for the Stability of Covariance Structure. Jurnal Teknologi (Sciences and Engineering), 63 (2). pp. 81-83. ISSN 0127-9696 (print); 2180-3722 (online)

Wan Nurlisa, Wan Ahmad (2013) Analysis on the performance of adsorption route in a tropical region. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Nursyazwani, Ibrahim (2013) Design and fabrication of a solid rocket motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Nurul Afiqah, Wan Mohd Shafie (2013) Productivity improvement of fish crackers processing using simulation technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Ruhayu , Wan Ramli (2013) Enhanced production of extracellular urate oxidase by Aspergillus Flavus. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Sharuzi, Wan Harun (2013) Experimental and numerical studies on superhigh strengthening sintered low alloy steels fabricated by metal injection molding). PhD thesis, Kyushu University.

Wan Siti Noorhashimah, Wan Kamaruzaman (2013) A Study of Morphological and Thermal Properties of Polylactic Acid (PLA) Modified MMT (Ion Exchange Method) Nanocomposite. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Zarriqbar Hakim , Wan Hilmi (2013) Structure construction materials: casting and strength of concrete arch pan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Wang , Le Wei (2013) Behavious based computer user clustering using rough set theory. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Withy Nurul Jannah, Mohd Hussein (2013) Performance analysis of video codec (H.263+, H.264) for videoconferencing over wireless local area network (WLAN). Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Wong Weng, Tim (2013) Talent Analytics System for UMP Lecturer Performance. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Wooi Chuan, Tan (2013) Modification of titanium dioxide nanoparticle to enhance the photoactivity in visible light region. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wu, Jing (2013) Development of tteachingg performance evaluation tool in higher education using artificial intelligent. Masters thesis, Universiti Malaysia Pahang.

Wu, Lihua (2013) Synthesis of polymer-stabilized metallic nanoparticles and their hydrogenation activity for vegetable oil. Masters thesis, Universiti Malaysia Pahang.

X

Xiong, Kun and Zhang, Yuhua and Li, Jinlin and Liew, Kong Yong (2013) Catalytic Properties of Ru Nanoparticles Embedded on Ordered Mesoporous Carbon with Different Pore Size in Fischer-Tropsch Synthesis. Journal of Energy Chemistry, 22 (4). pp. 560-566. ISSN 2095-4956

Xuan, Leong Yi (2013) Production and characterisation of roofing materials from natural fibres. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Y

Yap, Chee Kien (2013) Bridge modeling on the backwater effect due to arrangement and type of piers. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Yap, Qing Fu (2013) A study on the causes and methods to prevent construction delay in Selangor state and Kuala Lumpur. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Yaw Choon, Kit (2013) Steganography: Text File Hiding in Image. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Yeap, Chuen Theng (2013) A study of waste minimization at Fujikura Federal Cables Sdn. Bhd. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Yee Chee, Kang (2013) Business Impact Analyst (BIA) session runner. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Yee Ket, Chiew (2013) Optimization on acrylic acid plant by using Aspen Plus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yin, Phoon Wei (2013) Web management system for serious game in internal medical practice. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ying, Kong Zi (2013) Thermodynamic analysis of methane dry reforming. Faculty of Chemical & Natural Resources Engineering, University Malaysia Pahang.

Yok, Loke Kam (2013) Optimization of emulsion polymerization of styrene and methyl methacrylate (MMA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yong, Ying Mei (2013) Jamunaa menang 2 anugerah dalam pertandingan Chinese Bridge 2013. CREATE . p. 43. ISSN 1823-7487

Yuhani, Yusof and Nor Haniza, Sarmin and Fong, Wan Heng and Gooded , T. Elizabeth and Muhammad Azrin, Ahmad (2013) An Analysis of Four Variants of Splicing Systems. In: AIP Conference Proceedings: Proceedings of the 20th National Symposium on Mathematical Sciences, 18-20 December 2012 , Palm Garden Hotel, Putrajaya, Malaysia. pp. 888-895., 1522 (1). ISBN 978-0-7354-1150-0

Z

Z. M. , Hafizi and Epaarachchi, J. and Lau, K. T. (2013) An Investigation of Acoustic Emission Signal Attenuation for Monitoring of Progressive Failure in Fiberglass Reinforced Composite Laminates. International Journal of Automotive and Mechanical Engineering (IJAME), 8 . pp. 1442-1456. ISSN 2229-8649 (Print); 2180-1606 (Online)

Z. M. , Hafizi and Epaarachchi, J. and Lau, K. T. (2013) Wave Propagation Scattering Due to Defect on Thin Composite Plates. In: Proceedings of the 3rd Malaysian Postgraduate Conference (MPC2013), 4-5 July 2013 , Sydney, New South Wales, Australia. pp. 80-88..

Zahairin, Zakaria (2013) Monitoring device for electronics components inventory management system of FKP. FACULTY OF MANUFACTURING ENGINEERING, Universiti Malaysia Pahang .

Zahari, Taha and Aris, Mohd Azri and Zulkifli, Ahmad@Manap and Mohd Hasnun Ariff, Hassan and Nina Nadia, Sahim (2013) A Low Cost 3D Foot Scanner for Custom-Made Sports Shoes. Advanced Materials Research . ISSN 1022-6680

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris (2013) The Efficacy of Impact-Absorbing Materials during Collision with a Soccer Ball. Applied Mechanics and Materials, 440 . pp. 363-368. ISSN 1662-7482

Zahari, Taha and Hadi, Abdul Salaam and Tuan Mohammad Yusoff, Tuan Ya and S. Y., Phoon and C. F., Tan and M. A., Akiah (2013) Vortex Tube Air Cooling: The Effect on Surface Roughness and Power Consumption in Dry Turning. International Journal of Automotive and Mechanical Engineering (IJAME), 8 . pp. 1477-1586. ISSN 1985-9325(Print); 2180-1606 (Online)

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris and Zulfika, Anuar (2013) Predicting Brain Acceleration During Heading Of Soccer Ball. Materials Science and Engineering, 50 . pp. 1-6. ISSN 1757-899X

Zahidah Ansari, Ansari (2013) Wind turbine ( wind mapping ). FACULTY OF MANUFACTURING, Universiti Malaysia Pahang.

Zahrizan, Zakaria and Nasly, Mohamed Ali and Ahmad Tarmizi, Haron and Amanda, Marshall-Ponting and Zuhairi, Abd. Hamid (2013) Exploring The Adoption Of Building Information Modelling (BIM) In The Malaysian Construction Industry: A Qualitative Approach. International Journal of Research in Engineering and Technology (IJRET), 2 (8). pp. 384-395. ISSN 2321-7308 (print); 2319-1163 (online)

Zaidatul Syima, Zainal (2013) Surface roughness characterization on p20 tool steel in wirecut electrical discharge machining (wedm) process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Zaidi, Salim (2013) Application of Process Monitoring Based on Inferential Measurement Approach. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Zailani, Abdullah and Tutut, Herawan and Mustafa, Mat Deris (2013) Tracing Significant Association Rules Using Critical Least Association Rules Model. International Journal of Innovative Computing and Applications, 5 (1). pp. 3-17. ISSN 1751-648X (Print); 1751-6498 (Online)

Zailin Shah, Yusoff and Nuraihan, Mat Daud (2013) Frequency and Types of Revision Made in Wiki Assisted Writing Classroom. World Applied Sciences Journal, 21 . pp. 153-160. ISSN 1818-4952

Zainah, Md. Zain and Watanabe, Keigo and Izumi, Kiyotaka and Nagai, Isaku (2013) A Discontinuous Exponential Stabilization of Chained form System for an X4-AUV. Artificial Life and Robotics, 17 (3). pp. 463-469. ISSN 1433-5298 (Print) 1614-7456 (Online)

Zainol, Mustafa and Wong, Wai Ling and M. R., Abdul Hamid (2013) Persepsi Pelajar Terhadap Hasil Pembelajaran Bidang Kejuruteraan. Jurnal Teknologi (Sciences and Engineering), 62 (1). pp. 41-48. ISSN 0127-9696 (print); 2180-3722 (online)

Zaitul Aqmal , Mohd Asri (2013) Physical test of stainless steel 316 between different manufactures. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zaman, Haydar U. and A. Khan, Ruhul and A. Khan, Mubarak and Beg, M. D. H. (2013) Physico-Mechanical and Degradation Properties of Biodegradable Photografted Coir Fiber With Acrylic Monomers. Polymer Bulletin, 70 (8). pp. 2277-2290. ISSN 0170-0839(print); 1436-2449(online)

Zamardina, Zainal (2013) Lignin Production from Oil Palm Biomass. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Zambri, Harun and Nor Kamaliana, Khamis and Mohamad Dali, Isa and Zamri, Mohamed and Hashimah, Hashim (2013) The Roles of Professional Engineers at the Institutions of Higher Learning in Nation-Building. International Education Studies, 6 (6). pp. 137-142. ISSN 1913-9020

Zenfoong, Andy Pue (2013) Online data visualization for UMP strategic plan dashboard. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Zhang, Fang (2013) Exploring the provision of bus service for historical sites in south of Xi'an city. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Zhu, Lau Mei (2013) Extraction of phenolic compounds and flavonoids compounds from Orthosiphon Stamineus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zikrulhakim, Muhd Zahid (2013) A study on tool deflection during deep pocketing cycle. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Zul Fadli, Mohamad Tohid (2013) Automatic control valve using servo motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zul Fazrin, Zainul Abidin (2013) Seria staff movements management system (ssmms). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Zularisam, A. W. and Mimi Sakinah, A. M. and Siddique, Md. Nurul Islam (2013) Behaviour of Natural Organic Matter (NOM), Colloidal Particle and Solution Chemistry on Ultra-filtration Performance. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Zulfadly Syazwan, Zolkhair (2013) Different coating type on copper substrate. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulhafiz, Zulkifli (2013) Study on the adsorption process of monoethanolamine (MEA) wastewater using untreated rice husk and treated rice husk. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zulhelmi, Ismail (2013) Study the effect of screw speed and temperature profile on structure, thermal and physical properties of melt blended polyamide 6/MMT nanocomposites. Masters thesis, Universiti Malaysia Pahang.

Zulkarnain, Jema'at (2013) Isolation of Steviol Glycosides from the Mixtures of S.Rebaudiana Stems and Leaves Using Ethanol and Ultrasound Technique. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Zulkarnain , Muhamad (2013) Adaptable effectiveness of industrialised building (IBS) in construction projects. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Zulkhibri, Ismail and Hussanan, Abid and Khan, Ilyas and Sharidan, Shafie (2013) MHD and Radiation Effects on Natural Convection Flow in a Porous Medium past an Infinite Inclined Plate with Ramped Wall Temperature: An Exact Analysis. International Journal of Applied Mathematics and Statisics, 45 (15). pp. 77-86. ISSN 0973-1377 (Print); 0973-7545 (Online)

Zulkiflee, Sulaiman (2013) Effect of mercury concentration and operating parameters to mercury removal using portable mercury removal rig (PMRR) for petrochemical wastewater. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zulkifli, Ahmad@Manap and K., Kadirgama (2013) Optimization of The Surface Crack on The Human Lumbar Vertebra. In: The 9th International Conference on Fracture and Strength of Solids 2013, 9-13 June 2014 , Jeju, Korea. pp. 1-8.. (Unpublished)

Zulkifly, Jemaat (2013) Treatment of complex industrial wastewaters containing ammonium and phenolic compounds using granular sludge in continuous airlift reactors. PhD thesis, Universitat Autonoma de Barcelona.

Zulsyazwan, Ahmad Khushairi (2013) Optimization of Oil Palm Trunk Core Biodelignification Using Pleurotus Ostreatus. Masters thesis, Universiti Malaysia Pahang.

Zuraidah, Mohamad (2013) Copper removal from aqueous solution using Amberlite IR-120 cation exchanger mixed matrix membrane chromatography. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zuriana, Sidi Ahmad (2013) Production of Sorbitol from Meranti Wood Sawdust Using Solid State Fermentation (SSF) Process. Masters thesis, Universiti Malaysia Pahang.

Zuryaty, Zol (2013) FKP bantu sekolah kluster berentap ke pertandingan antarabangsa F1. CREATE . p. 22. ISSN 1823-7487

Zuryaty, Zol (2013) UMP-ITB meterai memorandum persefahaman. CREATE . p. 35. ISSN 1823-7487

Zuwairie, Ibrahim and Ismail, Ibrahim and Zulfakar, Aspar and Kamal, Khalil and Sophan Wahyudi, Nawawi and Muhammad Arif, Abdul Rahim and Wan Khairunizam, Wan Ahmad (2013) Noise Elimination for Image Subtraction in Printed Circuit Board Defect Detection Algorithm. International Journal Of Computers & Technology, 10 (2). pp. 1317-1329. ISSN 2277-3061

This list was generated on Sun Nov 19 10:28:43 2017 MYT.

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my