Items where Year is 2022

A

A., Irawan and Putra Azahar, M. I. and Hashimi, M. A. (2022) Sensorless force estimation on fingertip with gravitational compensation for heavy-duty pneumatic tri-grasper robot. In: Engineering Technology International Conference (ETIC 2022) , 7 - 8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 1-5.. ISBN 978-1-83953-782-0 (Published)

A. Fahmi Huwaidi, M. Noor and Nasrul Hadi, Johari (2022) Brief review on recent technology in particle image velocimetry studies on hemodynamics in carotid artery. In: Human Engineering Symposium, HUMENS 2021 , 22 February 2021 - 22 February 2021 , Virtual Online. pp. 267-277. (266559). ISSN 21954356 ISBN 9789811641145 (Published)

A. Fahmi Huwaidi, M. Noor and Nasrul Hadi, Johari (2022) Modeling the effect of different locations of carotid atherosclerosis on hemodynamics parameters. In: 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual Online. pp. 615-627., 882. ISSN 1876-1100 ISBN 9789811915772 (Published)

A. K., Verma and A. K., Nadda and A., Gupta and S., Sharma (2022) Plastic degradation and utilization by microbes: Challenges and scope. In: Enzymes for Pollutant Degradation. Microorganisms for Sustainability, 30 . Springer, Singapore, https://doi.org/10.1007/978-981-16-4574-7_9, pp. 177-192.

A. M., Aizzuddin and Danial Shafiq, Mohd Rashid and Mohd Yusof, Taib and Wan Azmi, Wan Hamzah (2022) Simulation of the ground heat exchanger under malaysian environment based on different thermal conductivity of soil and pipe materials. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 155.. (Published)

A. M., Faten Albtoush and S. I., Doh and R. A., Rahman and A. H., Al-Momani (2022) Critical success factors of construction projects in Jordan : An empirical investigation. Asian Journal of Civil Engineering, 23 (7). pp. 1087-1099. ISSN 1563-0854. (Published)

A. Rani, Hafnidar and Abdelrahman, M. Farouk and Anandh, K. S. and Almutairi, Saud and Rahimi, A. Rahman (2022) Impact of COVID-19 on Construction Projects: The Case of India. Buildings, 12 (762). pp. 1-21. ISSN 2075-5309. (Published)

AL-Japairai, Khater and Syed Mahmood, . and Mohd Azmir, Arifin and Nadiya, Abdul Halim and Almurisi, Samah Hamed (2022) Development and validation of HPLC method for determination of benidipine hydrochloride in lipid vesicles formulations. International Journal of Membrane Science and Technology, 9 (2). pp. 40-47. ISSN 2410 -1869. (Published)

Ab Rahman, Nur Naajihah and Nafrizuan, M. Y. and Zainal Abidin, Nuril Aqilah (2022) Investigation of the performance of PID control scheme for linear conveyor system of manufacturing shopfloor. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 1-7. ISSN 2637-0883. (Published)

Abbasi, Wajahat Taj and Ainol Haryati, Ibrahim and Fatimah, Ali (2022) Perceptions about English as second language teachers’ technology based English language teaching in Pakistan: Attitudes, uses of technology and challenges. In: Lecture Notes in Networks and Systems; International Conference on Emerging Technologies and Intelligent Systems, ICETIS 2021 , 25 - 26 June 2021 , Al Buraimi. 314 -325., 299. ISSN 2367-3370 ISBN 978-303082615-4 (Published)

Abbasi, Wajahat Taj and Ainol Haryati, Ibrahim and Fatimah, Ali (2022) The Relationship between Teachers’ Belief Systems, Creativity and the Use of Technology-Based English Teaching. International Journal of Language Education and Applied Linguistics (IJLEAL), 12 (2). pp. 6-17. ISSN 2289-7208 (print); 2289-9294 (online). (Published)

Abd Anasghaneem, Abd Aziz and Juliawati, Alias (2022) Performance of graphene as the corrosion inhibitor of magnesium alloy for automotive application. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 218.. (Published)

Abd Jalal, Ahmad Farid and Abdul Rahim, Rahimin Affandi and Mat Said, Mohamad Hilmi and Awang Pawi, Awang Azman (2022) Impak falsafah pasca-kolonialism terhadap muzium: Satu analisis kritikal. International Journal of Humanities Technology and Civilization (IJHTC), 7 (2). pp. 1-9. ISSN 2289-7216. (Published)

Abdalla, Ahmed N. and Jing, Wang and Nazir, Muhammad Shahzad and Jiang, Mingxing Xin and Tao, Hao (2022) Socio-economic impacts of solar energy technologies for sustainable green energy: A review. Environment, Development and Sustainability, Ahead of print. pp. 1-38. ISSN 1387-585X. (Published)

Abdul, Wahab and Muzamir, Hasan and Faradiella, Mohd Kusin and Zaidi, Embong and Uz Zaman, Qamar and Zaheer Uddin, Babar and Muhammad Syamsul Imran, Zaini (2022) Physical properties of undisturbed tropical peat soil at Pekan District, Pahang, West Malaysia. International Journal of Integrated Engineering, 14 (4). pp. 403-414. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Abdul, Wahab and Muzamir, Hasan and Kusin, F. M. and Rehman, R. U. and Din, Z. U. and Zaman, Q. U. (2022) The electrokinetic impact on heavy metals remediation of Tasik Chini iron ore mine tailings at Pahang State, Peninsular Malaysia. Journal of Engineering and Technology (JET), 14 (1). pp. 75-90. ISSN 2180-3811. (Published)

Abdul Akram Azfar, Abd Fadzir (2022) Modelling Study Ol High-Current Density Chlorophyll-Based Dyesensitized Solar Cell. College of Engineering, Universiti Malaysia Pahang.

Abdul Basit, Khairul Salleh and Hussain, Suhaidah (2022) Exploring the influence of service quality (SQ) on patient satisfaction (PS): A case study of Universiti Malaysia Pahang Health Centre (UMPHC). International Journal of Industrial Management (IJIM), 15 (1). pp. 26-37. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Abdul Ghani, Radiah and Hassan, Habibah and Ahmad Roslee, Athirah Nur and Ahmad Irfan, Ikmal Hisham (2022) Physiology of integumentary system: Integration from Islamic perspective. In: 1st International Conference on Contemporary Islamic Studies (ICIS 2021) , 8 June 2021 , Virtual Conference. pp. 283-288.. ISBN 978-981-19-2390-6 (Published)

Abdul Hadi, Mohd Hanif and Mohd Shawal, Jadin and Norizam, Sulaiman and Airul Sharizli, Abdullah and Jun, Lee Woan (2022) Improving the effect of non-uniform thermal distribution and electrical mismatch for PV Panel during partial shading condition. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 1067-1080., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6 (Published)

Abdul Halim, Abdul Razik and Roziah, Zailan and Elkamel, Marwen and Elkamel, Ali (2022) Multi-product productions from malaysian oil palm Empty Fruit Bunch (EFB) : Selection for optimal process and transportation mode. Resources, 11 (67). pp. 1-31. ISSN 2079-9276. (Published)

Abdul Mudalip, S. K. and Hashim, Nurmaryam AIni and Ganesun, Yogeswary and Md Shaarani, Shalyda and Sulaiman, S. Z. (2022) Intensification of phenolic content and antioxidant activity of extract from red pitaya (hylocereus polyrhzius) peel. In: AIP Conference Proceedings; 2nd Energy Security and Chemical Engineering Congress, ESChE 2021 , 3 - 5 November 2021 , Gambang, Kuantan. pp. 1-6., 2610 (060019). ISSN 0094-243X ISBN 978-073544378-5 (Published)

Abdul Muiz, Hasim and Khairul Anuar, Shahid and Nur Farhayu, Ariffin and Nurul Natasha, Nasrudin and Muhamad Nor Syahrul, Zaimi (2022) Properties of high-volume coal bottom ash in concrete production. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum (iM3F2021) , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang, Pekan, Malaysia. pp. 1861-1867., 48 (Part 6). ISSN 2214-7853 (Published)

Abdul Muiz, Hasim and Khairul Anuar, Shahid and Nur Farhayu, Ariffin and Nurul Natasha, Nasrudin and Muhammad Nor Syahrul, Zaimi (2022) Study on mechanical properties of concrete inclusion of high-volume coal bottom ash with the addition of fly ash. In: Materials Today: Proceedings, 3rd Symposium on Industrial Science and Technology (SISTEC2021) , 25-26 August 2021 , Virtual Conference, Universiti Malaysia Pahang. pp. 1355-1361., 51 (Part 2). ISSN 2214-7853 (Published)

Abdul Muiz, Hasim and Khairul Anuar, Shahid and Nur Farhayu, Ariffin and Nurul Natasha, Nasrudin and Muhammad Nor Syahrul, Zaimi and Mohd Khairul Amri, Kamarudin (2022) Coal bottom ash concrete: Mechanical properties and cracking mechanism of concrete subjected to cyclic load test. Construction and Building Materials, 346 (128464). pp. 1-15. ISSN 0950-0618. (Published)

Abdul Mu’iz Zulfadli, Ab Wahab (2022) Optimal Power Flow Solution With Stochastic Renewable Energies Using Nature Inspired Algorithm. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang.

Abdul Nasir, Abd Ghafar (2022) Pendidikan hingga ke menara gading dipandang sepi atau kekal relevan. UMP News .

Abdul Rahman, Mohd Kasim (2022) Pusat Sains Matematik, Universiti Malaysia Pahang (PSM UMP) adakan pra perbincangan dengan Universiti Teknologi Petronas (UTP) dan dua (2) universiti dari Indonesia (Universitas Islam Riau (UIR) dan Universitas Telkom (Tel-U)) untuk inisiatif geran padanan antarabangsa. News & Events PSM . pp. 1-2.

Abdul Rahman, Mohd Kasim and Laila Amera, Aziz and Noor Amalina Nisa, Ariffin and Mohamad Hidayad, Ahmad Kamal and Iskandar, Waini and Mohd Zuki, Salleh and Dennis, Ling Chuan Ching (2022) Flow Analysis on Boundary Layer of Porous Horizontal Circular Cylinder Filled by Viscoelastic-Micropolar Fluid. CFD Letters, 14 (11). pp. 49-62. ISSN 2180-1363. (Published)

Abdul Rashid, Abdul Rahman (2022) UMP sedia pelan segera dan jangka panjang. Kosmo . p. 3.

Abdul Razak, Ahmad Azwan and Nasir, Ahmad Nor Kasruddin and Abd Ghani, N. M. and Mat Jusof, Mohd Falfazli (2022) Manta ray foraging optimization with quasi-reflected opposition strategy for global optimization. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. 477 -485., 842. ISSN 1876-1100 ISBN 978-981168689-4 (Published)

Abdul Razak, Ahmad Azwan and Nasir, Ahmad Nor Kasruddin and Abd Ghani, N. M. and Mohammad, Shuhairie and Mat Jusof, Mohd Falfazli and Mhd Rizal, Nurul Amira (2022) Non-dominated sorting manta ray foraging algorithm with an application to optimize PD control. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. 463 -474., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Abdul Wahab, Hashmi and Mali, Harlal Singh and Meena, Anoj and Khilji, Irshad Ahamad and Chilakamarry, Chaitanya Reddy and Siti Nadiah, Mohd Saffe (2022) Experimental investigation on magnetorheological finishing process parameters. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1892-1898., 48 (Part 6). ISSN 2214-7853 (Published)

Abdul Wahab, Hashmi and Mali, Harlal Singh and Meena, Anoj and Khilji, Irshad Ahamad and Mohammad Farukh, Hashmi and Siti Nadiah, Mohd Saffe (2022) Machine vision for the measurement of machining parameters: A review. Materials Today: Proceeding, 56 (4). pp. 1939-1946. (Published)

Abdul Wahab, Norwazli and Sapuan, Noraina Mazuin and Abdinazarovich, Omonov Akrom (2022) Internal corporate governance mechanism: A review. Journal of Governance & Integrity, 5 (2). 237 -248. ISSN 2600-7479. (Published)

Abdul Wahab Hashmi, Hashmi and Harlal Singh Mali, Harlal Singh and Anoj Meena, Anoj and Khilji, Irshad Ahamad and Mohammad Farukh, Hashmi and Siti Nadiah, Mohd Saffe (2022) Artificial intelligence techniques for implementation of intelligent machining. Materials Today: Proceeding, 56 (4). pp. 1947-1955. ISSN 2214-7853. (Published)

Abdullah, Mohd Amirul Mukmin and Abu Seman, M. N. and Saufi, S. M. and Abdullah, Syamsul B. (2022) Factorial design in optimizing parameters for thermoresponsive ionic liquids as draw solution. Process Safety And Environmental Protection, 161. pp. 34-49. ISSN 0957-5820. (Published)

Abdullah, N. A. Z. and Asri, M. N. A. M. and M. S. M., Sani (2022) Strategies of finite element modeling for spot welded joints and its modal correlation with experimental data. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9543-9550. ISSN 2180-1606. (Published)

Abdullah, Nayeem (2022) Synthesis of polysulfide adsorbent from waste cooking palm oil for the removal of iron (ⅲ). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jun Haslinda, Shariffuddin).

Abdullah, Nayeema and Jun Haslinda, Shariffuddin and Mohd Faizal, Ali (2022) Waste cooking palm oil as sustainable material for polysulfide synthesis : Characterization as a crosslinker for inverse vulcanization. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 143.. (Published)

Abdullah, Z. and Peeie, M. H. and Zakaria, M. A. and Ishak, M. I. and Shahrom, M. A. and Kujunni, B. (2022) Motion planning and tracking trajectory of an autonomous emergency braking pedestrian (AEB-P) system based on different brake pad friction coefficients on dry road surface. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). 10002 -10013. ISSN 2180-1606. (Published)

Abdullah Adnan, Mohamed and Amy Zulaikha, Mohd Ali and Wan Jumani, Fauzi (2022) UMP perkenalkan budaya Malaysia kepada pelajar luar negara melalui jendela maya. UMP News .

Abdulmajeed Ali Mohammed, Nasser Al-Hokabi (2022) Performance of soft clay stabilized with the replacement of palm oil fuel ash and gypsum. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muzamir, Hasan).

Abdulmalek, Suliman and Abd Ghafar, Abdul Nasir and Jabbar, Waheb A. and Almuhaya, Mukarram A. M. and Bairagi, Anupam Kumar and Khan, Md. Al-Masrur and Kee, Seong-Hoon (2022) IoT-based healthcare-monitoring system towards improving quality of life: A review. Healthcare, 10 (10). pp. 1-30. ISSN 2227-9032. (Published)

Abdulmalek, Suliman and Abdul, Nasir and Jabbar, Waheb A. and Almuhaya, Mukarram A. M. and Babu, Devin (2022) An Internet of Wearable Things (IOWT) Based System For Smart Healthcare Monitoring. In: Engineering Technology International Conference 2022 (ETIC 2022) , 7 - 8 September 2022 , Pekan, Universiti Malaysia Pahang, Malaysia. pp. 1-7.. (Unpublished) (Unpublished)

Abdusalam, Youssif Hussin and Islam, Mir Sujaul and Khalid, Zaied and Abdulali Habberrih, Salah Omar and Fadzil, Mat Yahaya (2022) Assessment of physico-chemical parameters of surface water quality in Chini Lake Area, Pahang, Malaysia. In: Engineering Technology International Conference 2022 (ETIC 2022) , 7 - 8 September 2022 , Universiti Malaysia Pahang, Pahang. pp. 1-12.. (Unpublished) (Unpublished)

Abdusalam, Youssif Hussin and Islam, Mir Sujaul and Zaied, Khalid and Abdulali Habberrih, Salah Omar and Fadzil, Mat Yahaya (2022) Assessment of heavy metal contamination of agricultural and mining soil around Chini Lake: Implication of seasonal variation. In: Engineering Technology International Conference 2022 (ETIC 2022) , 7 - 8 September 2022 , Universiti Malaysia Pahang, Pahang. pp. 1-16.. (Unpublished) (Unpublished)

Abed, Munther Hameed and Mohd Nizam Mohmad, Kahar (2022) Guided genetic algorithm for solving unrelated parallel machine scheduling problem with additional resources. Indonesian Journal of Electrical Engineering and Computer Science, 26 (2). pp. 1036-1049. ISSN 2502-4752. (Published)

Abu Jafar, Md Muzahid (2022) Reinforcement learning based decision-making model in autonomous vehicle control for cooperation and mitigation of collision among multiple vehicles. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syafiq Fauzi, Kamarulzaman).

Abu Jafar, Md Muzahid and Syafiq Fauzi, Kamarulzaman and Rahman, Md. Arafatur and Alenezi, Ali H. (2022) Deep reinforcement learning based driving strategy for avoidance of chain collisions and its safety efficiency analysis in autonomous vehicles. IEEE Access, 4. pp. 1-18. ISSN 2169-3536. (Published)

Abu Shadate, Faisal Mahamude (2022) Performance investigation of solar collector with cotton-based cnc and graphene hybrid nano fluids. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Sharuzi, Wan Harun).

Addie Irawan, Hashim and Mohd Iskandar Putra, Azahar and Pebrianti, Dwi (2022) Interaction Motion Control on Tri-finger Pneumatic Grasper using Variable Convergence Rate Prescribed Performance Impedance Control with Pressure-based Force Estimator. Journal of Robotics and Control (JRC), 3 (5). pp. 716-724. ISSN 2715-5072. (Published)

Adhikary, Apurba and Bhuiya, Joy and Murad, Saydul Akbar and Hossain, Md. Bipul and Aslam Uddin, K. M. and Faysal, MD Estihad and Rahaman, Abidur and Bairagi, Anupam Kumar (2022) Performance evaluation of micro lens arrays: Improvement of light intensity and efficiency of white organic light emitting diodes. PLoS ONE, 17 (5). pp. 1-28. ISSN 1932-6203. (Published)

Adhikary, Apurba and Murad, Saydul Akbar and Munir, Md Shirajum and Choong Seon, Hong Seong (2022) Edge assisted crime prediction and evaluation framework for machine learning algorithms. In: International Conference on Information Networking; 36th International Conference on Information Networking, ICOIN 2022 , 12-15 January 2022 , Virtual, Jeju Island. pp. 417-422., 2022 (176661). ISSN 1976-7684 ISBN 978-166541332-9 (Published)

Adhwa Wirdany, Abdul Razak and Saidatul Shima, Jamari (2022) Biodegradability effects on the PHA/NFC nanocomposite. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 207.. (Published)

Adnan, Siti Zubaidah and Abdul Samad, Noor Asma Fazli (2022) Effects of nucleation and crystal growth rates on crystal size distribution for seeded batch potash alum crystallization process. ASEAN Journal of Chemical Engineering, 22 (2). pp. 258-273. ISSN 1655-4418. (Published)

Afiq Anwar, Akmal (2022) State Of Charge Estimation Of Battery Management System. College of Engineering, Universiti Malaysia Pahang.

Afiq Danial, Noorzam (2022) Healthcare Information System For Audiology Department (IIUM Hearing & Speech Clinic System). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Afiq Ikhwan, Mohd Fauzi (2022) Computer Vision Estimation Of Volume And Weight Of Apple By Using 2d Noncontact Measuring Method. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Afiq Ikhwan, Mohd Fauzi and Mohd Zamri, Ibrahim and Muhammad Salihin, Saealal (2022) Estimation of volume and weight of apple by using 2D contactless computer vision measuring method. In: International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022 , 16-18 November 2022 , Male. pp. 1-6. (185686). ISBN 978-166547095-7 (Published)

Afiq Rahimi, Rosmani (2022) Monitoring for uninterruptible power supply (UPS) system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Afiqah R., Radzi and Abdul Rahimi, Abdul Rahman and Almutairi, Saud (2022) Modeling COVID-19 impacts and response strategies in the construction industry: PLS–SEM approach. International Journal of Environmental Research and Public Health, 19 (9). pp. 1-25. ISSN 1661-7827. (Published)

Afkar Rabbani Hidayatullah, Hipeni and T’ng, J.W. and N., Hashim and Nur Shuhada, Jasmi Shah and Khairatun Najwa, Mohd Amin (2022) Variation of nanocellulose reinforced recycled paper : Effect on tensile strength. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 153.. (Published)

Afrouzeh, Mohsen and Konukman, Ferman and Musa, Rabiu Muazu and Suppiah, Pathmanathan K. and Abdul Majeed, Anwar P. P. and Mohd Azraai, Mohd Razman (2022) Kinematic variables defining performance of basketball free-throw in novice children : An information gain and logistic regression analysis. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 949-956., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Afrouzeh, Mohsen and Konukman, Ferman and Musa, Rabiu Muazu and Suppiah, Pathmanathan K. and P.P. Abdul Majeed, Anwar and Mohd Azraai, Mohd Razman (2022) Kinematic variables defining performance of basketball free-throw in novice children : An information gain and logistic regression analysis. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang. pp. 949-956., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Ahamad Khilji, Irshad and Siti Nadiah, Mohd Saffe and Reddy Chilakamarry, Chaitanya and Siti Aishah, Rusdan (2022) The crashworthiness performance of the energy-absorbing composite structure—A review. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials. Lecture Notes in Mechanical Engineering (LNME) . Springer, Singapore, Singapore, pp. 637-650. ISBN 978-981-19-2889-5 (Print); 978-981-19-2890-1(Online)

Ahlam, Aljabali and Abdul Rahman, Mohd Kasim and Nur Syamilah, Arifin and Noor Amalina Nisa, Ariffin and Dennis, Ling Chuan Ching and Iskandar, Waini and Najiyah Safwa, Khasi’ie and Nurul Amira, Zainal (2022) Two-Phase Flow of Eyring–Powell Fluid with Temperature Dependent Viscosity over a Vertical Stretching Sheet. Mathematics, 10 (3111). ISSN 2227-7390. (Published)

Ahmad, Abdulla Obaid and Fam, Soo-Fen and Chuan, Zun Liang and Wahjono, Sentot Imam and Mohd Nusa, Najwa and Husseini, Saleh Ali (2022) Integration of TQM practices and ERP to enhance innovation culture and innovative work behavior: A proposed framework. Journal of Positive School Psychology, 6 (3). pp. 4668-4676. ISSN 2717-7564 (Online). (Published)

Ahmad, Omar and Muhammad Nubli, Abdul Wahab (2022) Kajian Keberkesanan Permainan Puzzle dan Latihan Biofeedbackdalam Meningkatkan Prestasi Pelajar Sekolah Rendah. Sains Insani, 7 (2). pp. 31-39. ISSN 0127-7871. (Published)

Ahmad, Omar and Muhammad Nubli, Abdul Wahab (2022) Kajian Penggunaan Permainan Puzzle dan Latihan Biofeedback Dalam Meningkatkan Prestasi Matematik Pelajar Sekolah Rendah. Sains Insani, 7 (2). pp. 31-39. ISSN 0127-7871. (Published)

Ahmad Amjad, Ahmad Daud (2022) Development of vision based automated guided vehicle. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Aqil Safwan, Ahmad Zabidi (2022) Development of multi-legged robot controller with remotely control system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Ashraf, Abdul Halim and Andrew, Allan Melvin and Wan Azani, Mustafa and Mohd Najib, Mohd Yasin and Muzammil R.I., Mat Jusoh and Veeraperumal, Vijayasarveswari and Mohd Amiruddin, Abd Rahman and Norshuhani, Zamin and Mary, Mervin Retnadhas and Khatun, Sabira (2022) Optimized intelligent classifier for early breast cancer detection using ultra-wide band transceiver. Diagnostics, 12 (2870). pp. 1-19. ISSN 2075-4418. (Published)

Ahmad Azahari, Hamzah and Yasmin, Abdul Wahab and Ruzairi, Abdul Rahim and Farah Aina, Mohamad Jamal and Suzanna, Ridzuan Aw and Mohd Hafiz Fazalul, Rahiman and Pusppanathan, Jaysuman and Nasarudin, Ahmad and Mohamad Shukri, Abdul Manaf and San, Chan Kok and Green, Robert Garnett and Nur Arina Hazwani, Samsun Zaini and Ahmad Ridhwan, Wahap (2022) Investigation of solid velocity measurement using single-plane versus dual-plane of electrical capacitance tomography for coal power plant application. In: Lecture Notes in Electrical Engineering; 3rd International Conference on Control, Instrumentation and Mechatronics Engineering, CIM 2022 , 2-3 March 2022 , Virtual, Online. 752 -769., 921 LNEE (280399). ISSN 1876-1100 ISBN 978-981193922-8 (Published)

Ahmad Azwan, Abdul Razak and Ahmad Nor Kasruddin, Nasir (2022) Gradient-based mutation manta ray foraging optimization (gbm-mrfo) for solving constrained real-world problems. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 122.. (Published)

Ahmad Azwan, Abdul Razak and Ahmad Nor Kasruddin, Nasir and Nor Maniha, Abd Ghani (2022) Super-opposition spiral dynamic-based fuzzy control for an inverted pendulum system. Bulletin of Electrical Engineering and Informatics, 11 (5). pp. 2737-2745. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Ahmad Azwan, Abdul Razak and Ahmad Nor Kasruddin, Nasir and Nurul Amira, Mhd Rizal and Nor Maniha, Abd Ghani and Mohd Falfazli, Mat Jusof and Mohd Ashraf, Ahmad (2022) Quasi oppositional—Manta ray foraging optimization and its application to pid control of a pendulum system. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. 923- 935., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6 (Published)

Ahmad Faizrin, Ahmad Fuzlin and Ahmad Salihin, Samsudin (2022) Review on provision of solid-state polymer electrolytes for electrochemical energy storage devices. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 144.. (Published)

Ahmad Faizrin, Fuzlin and Nor Fatihah, Mazuki and Nurhasniza, Mamajan Khan and Saadiah, M. A. and Hasan, Md. M. and Nagao, Y. and Ahmad Salihin, Samsudin (2022) Studies on the ions transportation behavior of alginate doped with H+ carrier-based polymer electrolytes. Materials Chemistry and Physics, 287 (126207). pp. 1-12. ISSN 0254-0584. (Published)

Ahmad Faizrin, Fuzlin and Saadiah, M. A. and Hasan, Md. M. and Nagao, Y. and Izan Izwan, Misnon and Ahmad Salihin, Samsudin (2022) Involvement of ethylene carbonate on the enhancement H+ carriers in structural and ionic conduction performance on alginate bio-based polymer electrolytes. International Journal of Hydrogen Energy, 47 (12). pp. 7846-7860. ISSN 0360-3199. (Published)

Ahmad Farid, Abd Jalal and Rahimin Affandi, Abdul Rahim and Mohamad Hilmi, Mat Said and Muhammad Jumaidy, Abdul Manap (2022) Kearifan ketatanegaraan dan gender Melayu Islam Pahang di Aceh: Satu analisa. International Journal of Humanities Technology and Civilization (IJHTC), 7 (1). pp. 97-107. ISSN 2289-7216. (Published)

Ahmad Farimin, Ahmad Osman and Ahmad Hafiz, Mohd Jamil and Shamsul, Zakaria (2022) Electromechanical performances of dual system PDMS dielectric elastomer. In: 2022 10th International Conference on Control, Mechatronics and Automation, ICCMA 2022 , 9-12 November 2022 , Luxembourg. pp. 31-35. (186083). ISBN 978-166549048-1 (Published)

Ahmad Farimin, Ahmad Osman and Shamsul, Zakaria and Nur Syamimi, Ramlee and Nur Hanisah, Asri (2022) Bilayered polydimethylsiloxane (PDMS) composite for dielectric elastomer applications. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics & Material Forum 2022, iM3F 2022 , 20 July 2022 , Pekan. pp. 63-67., 75 (149158). ISSN 2214-7853 (Published)

Ahmad Firdaus, Zainal Abidin and Aldharhani, Ghassan Saleh and Zahian, Ismail and Mohd Faizal, Ab Razak (2022) The summer heat of cryptojacking season : Detecting cryptojacking using heatmap and fuzzy. In: International Conference on Cyber Resilience, ICCR 2022 , 6-7 October 2022 , Dubai. pp. 1-5. (185824). ISBN 978-166546122-1 (Published)

Ahmad Fitri, Yusop and Mohamad Adzuan, Aziz and Mohd Adnin, Hamidi and Daing Mohamad Nafiz, Daing Idris and Ummi Hafsah, Zaidi (2022) Investigation on the RCCI engine on performance and emission. In: Eurasia Proceedings of Science, Technology, Engineering and Mathematics. International Conference on Technology, Engineering and Science, IConTES 2022 , 16 - 19 November 2022 , Antalya. pp. 525-540., 21. ISSN 2602-3199 ISBN 978-605728324-5 (Published)

Ahmad Hakimi, Hasnan (2022) Leader follower pattern formation control using ros for mobile robot application. College of Engineering, Universiti Malaysia Pahang.

Ahmad Hisyam, Suryanto Sugian (2022) Optimized Image Watermarking Based On HD And SVD In IWT Domain. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Irfan, I. H. (2022) Cerapan anak bulan dibantu data dari sumber diiktiraf. In: Anak Bulan Syawal: Monograf Penentuan Aidilfitri 1443/2022. Persatuan Jurufalak Syarie, Putrajaya, pp. 29-32. ISBN 978-629-97041-1-9

Ahmad Irfan, Ikmal Hisham (2022) Cerapan anak bulan dibantu data dari sumber diiktiraf. Berita Harian .

Ahmad Irfan, Ikmal Hisham (2022) Kemerdekaan Malaysia perlu dipertahankan dan bantu pembebasan Palestin. UMP News .

Ahmad Irfan, Ikmal Hisham (2022) Malaysias independence must be defended and aid Palestine liberation. UMP News .

Ahmad Luqmann, Afandi (2022) Scaling Up TiO2 Anodization Device For Gas-Phase Photocatalysis. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Mahfuz, Gazali (2022) Covid-19, monkeypox, and others when will new infectious diseases stop emerging. Code Blue .

Ahmad Mahfuz, Gazali (2022) Dos penggalak Covid-19 mampu tingkatkan sistem imun lawan jangkitan Omicron. UMP News .

Ahmad Mahfuz, Gazali (2022) Hand, Foot And Mouth Disease: Are We Closer To Finding A Drug Or Vaccine? CodeBlue - 27 May 2022 . p. 1.

Ahmad Mahfuz, Gazali (2022) Manfaat MySejahtera untuk kajian Long COVID. UMP News .

Ahmad Mahfuz, Gazali (2022) Prioritising Scientific Data In Covid-19 Vaccine Policy. CodeBlue - 18 March 2022 . p. 1.

Ahmad Mahfuz, Gazali (2022) An updated review of type 1 diabetes in Malaysia. IIUM Medical Journal Malaysia, 21 (3). 15 -24. ISSN 2735-2285. (Published)

Ahmad Muhaimin, Mohamad and Rohana, Hamzah and Anita, Abdul Rani and Rashidi, Abbas and Mohd Suhardi, Mat Jusoh and Siti Fatihah, Ghazali and Nurul Fatihah, Abdul Rahman (2022) Analisis kefahaman kewajipan solat dan kefasihan bacaan Al-Fatihah dalam kalangan pelajar kejuruteraan. Journal of Quran Sunnah Education and Special Needs (JQSS), 6 (1). pp. 14-30. ISSN 2590-3799. (Published)

Ahmad Noor Syukri, Zainal Abidin and Arief Hakimi, Azmi and Khairil Anwar, Abu Kassim and Ahmad Shahir, Jamaludin and Mohd Nizari, Mhd Razal (2022) A Review on Automotive Tires Significant Characteristic Identification for General Consumers. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 375-385.. ISSN 2195-4356 ISBN 978-981-19-4425-3 (In Press / Online First) (In Press / Online First)

Ahmad Nor Kasruddin, Nasir and Mohd Falfazli, Mat Jusof and Mohd Redzuan, Ahmad and Addie Irawan, Hashim (2022) Spiral-sooty tern optimization algorithm for dynamic modelling of a twin rotor system. In: Proceedings - 2022 Innovations in Intelligent Systems and Applications Conference, ASYU 2022 , 7-9 September 2022 , Antalya. pp. 1-6. (183936). ISBN 978-166548894-5 (Published)

Ahmad Nor Kasruddin, Nasir and Mohd Falfazli, Mat Jusof and Nor Maniha, Abdul Ghani and Raja Mohd Taufika, Raja Ismail (2022) Opposition-sooty tern algorithm for fuzzy control optimization of an inverted pendulum system. In: Proceedings - 2022 Innovations in Intelligent Systems and Applications Conference, ASYU 2022 , 7-9 September 2022 , Antalya. pp. 1-5. (183936). ISBN 978-166548894-5 (Published)

Ahmad Redzuan, Abdul Razak (2022) High Efficiency Isolated Three Port Dc-Dc Converter For Dc Charger Stations. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Ridhauddin, Abdul Rauf and Wan Hasbullah, Mohd Isa and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Mohd Hafiz, Arzmi and Abdul Majeed, Anwar P. P. (2022) The classification of oral squamous cell carcinoma (OSCC) by means of transfer learning. In: Lecture Notes in Networks and Systems; 9th International Conference on Robot Intelligence Technology and Applications, RiTA 2021 , 16-17 December 2021 , Daejeon. pp. 386-391., 429. ISBN 978-303097671-2 (Published)

Ahmad Shahrizan, Abdul Ghani and Ismail Mohd., Khairuddin and Muhammad Amirul, Abdullah and Ahmad Fakhri, Ab. Nasir and Jessnor Arif, Mat Jizat and Mohd. Azraai, Mohd. Razman and Muhammad Aizzat, Zakaria and Wan Hasbullah, Mat Isa and Anwar P. P., Abdul Majeed (2022) Enabling Industry 4.0 through Advances in Mechatronics. LNEE, 1 (1). Springer Singapore, Springer Link. ISBN 1876-1100

Ahmad Shahrizan, Abdul Ghani and Muhammad Daniel Naim, Zulkifflee (2022) Investigation on data acquisition accuracy for long range communication using RFM LoRa. In: 2022 8th International Conference on Control, Decision and Information Technologies, CoDIT 2022 , 17-20 May 2022 , Istanbul. pp. 320-325. (180591). ISBN 978-166549607-0 (Published)

Ahmad Shukri, Mohd Noor and Auni, Che Fauzi and Ainul Azila, Che Fauzi and Noraziah, Ahmad and Mohamad Syauqi, Arifin (2022) An automate failure recovery for synchronous distributed database system. Indonesian Journal of Electrical Engineering and Computer Science, 28 (2). pp. 973-979. ISSN 2502-4752. (Published)

Ahmad Syafiq, Deraman and M. H., Hasbullah and Niirmel, Ranjanendran and Mujahid, Mohamad (2022) Study of trapezoidal flexible horizontal piezoelectric cantilever beam based on ANSYS. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 1187-1195., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6 (Published)

Ahmad Syahmi Aiman, Mohd Zuri (2022) Optimal Planning Of Distributed Generation Considering Time Varying Load. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Zairi, Mohd Zain and Mohd Ikhwan, Muhammad Ridzuan and Nur Zahirah, Mohd Ali (2022) Impacts of incorporating Distributed Generation (DG) to the reliability of electric distribution network using Monte Carlo Simulation (MCS). In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 329-334., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)

Ahmarof, Ahmad Afif and kamaruzzaman, zetty ain and Abdul Rahman, Hamirahanim and Masri, K. A. and Abdul Rahim, Nadirah and Shariff, S.Sarifah Radiah and Idrus, Zanariah and Ismail, Siti Nurbaya and Ahmad, Afida (2022) Development of a computer simulation on road pricing strategy to reduce congestion and carbon dioxide emission: A system dynamics approach. In: 6th IEEE International Conference on Recent Advances and Innovations in Engineering, ICRAIE 2021 , 1 - 3 December 2021 , Kedah, Virtual. pp. 1-6. (177296). ISBN 978-1-6654-3402-7 (Published)

Ahmed, Marzia and Shaha, Rony and Sarker, Kaushik and Mahi, Rifat Bin and Kashem, Mohammod Abul (2022) Design and implementation of intelligent dustbin with garbage gas detection for hygienic environment based on IoT. In: 2022 International Conference on Advancement in Electrical and Electronic Engineering, ICAEEE 20222 , 24 - 26 February 2022 , Dhaka University of Engineering & Technology (DUET), Bangladesh. pp. 1-7. (181480). ISBN 978-166546944-9 (Published)

Ahmed, Marzia and Sulaiman, M. H. and Mohamad, A. J. and Rahman, Mostafijur (2022) A hybrid method for analyzing the situation based on cumulative fully vaccinated and confirmed cases of Covid-19 in Malaysia. In: 4th International Conference On Sustainable Technologies For Industry 4.0, STI2022 , 18 - 19 Dec, 2022 , Green University of Bangladesh, Bangladesh. pp. 1-6. (188193). ISBN 978-166549045-0 (Published)

Ahmed, Mashuk and Nasser, Abdullah B. and Kamal Z., Zamli (2022) Construction of prioritized t-way test suite using Bi-objective Dragonfly Algorithm. IEEE Access, 10. 71683 -71698. ISSN 2169-3536. (Published)

Ahmed, Mashuk and Nasser, Abdullah B. and Kamal Z., Zamli and Heripracoyo, Sulistyo (2022) Comparison of performances of Jaya Algorithm and Cuckoo Search algorithm using benchmark functions. In: Lecture Notes in Networks and Systems; International Conference on Emerging Technologies and Intelligent Systems, ICETIS 2021 , 25 - 26 June 2021 , Al Buraimi. 114 -125., 299. ISSN 2367-3370 ISBN 978-303082615-4 (Published)

Ahmed, Mohammad Tofayal and Monir, Minhaj Uddin and Azrina, Abd Aziz and Hasan, Yeasir and Hossain Khan, Mohammad Forrukh and Islam, Kamrul and Hasan, Mehedi and Biswas, Biplob Kumar and Woobaidullah, Abu Sale and Samad, Abdus and Ahmed, Fee Faysal and Rifat, Shamiul Islam and Al Noman, Abdullah and Faruque, Jamal (2022) Hydrochemical investigations of coastal aquifers and saltwater intrusion in severely affected areas of Satkhira and Bagerhat districts, Bangladesh Bangladesh. Arabian Journal of Geosciences, 15 (712). pp. 1-22. ISSN 1866-7511. (Published)

Ahmmed, Mohammad Badal and Kamal Z., Zamli (2022) A population division based multi-task optimization algorithm for solving multiple-team formation problem based on Tiki-Taka optimization algorithm. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 53.. (Published)

Ain Eazriena, Che Man and Yasmin, Abdul Wahab and Nurhafizah, Abu Talip and Suzanna, Ridzuan Aw and Mohd Mawardi, Saari and Ruzairi, Abdul Rahim and Sia, Yee Yu (2022) Simulation of frequency selection for invasive approach of electrical capacitance tomography for conducting pipe application using oil-gas regimes. In: Engineering Technology International Conference (ETIC 2022) , 7 - 8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 63-68.. ISBN 978-1-83953-782-0 (Published)

Aina Najwa, Nadzri and Mohd Jamil Mohamed, Mokhtarudin and Wan Naimah, Wan Ab Naim and Payne, Stephen J. (2022) Simulation of Craniectomy Size in Decompressive Craniectomy for Ischaemic Stroke. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 599-607.. ISBN 978-981-19-2890-1 (Published)

Ainie Hayati, Noruzman and Ngahzaifa, Ab Ghani and Nor Saradatul Akmar, Zulkifli (2022) A comparative study on autism among children using machine learning classification. In: Lecture Notes in Networks and Systems. International Conference on Emerging Technologies and Intelligent Systems, ICETIS 2021 , 25 - 26 June 2021 , Al Buraimi. pp. 131-140., 322. ISSN 2367-3370 (Published)

Ainie Hayati, Noruzman and Ngahzaifa, Ab Ghani and Nor Saradatul Akmar, Zulkifli (2022) A comparative study on autism among children using machine learning classification. In: Lecture Notes in Networks and Systems; International Conference on Emerging Technologies and Intelligent Systems, ICETIS 2021 , 25-26 June 2021 , Al Buraimi. pp. 131-140., 322 (263669). ISSN 2367-3370 ISBN 978-303085989-3 (Published)

Ainie Hayati, Noruzman and Ngahzaifa, Ab Ghani and Nor Saradatulakmar, Zulkifli (2022) FURIA stacking ensemble for ASD classification. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 110.. (Published)

Ainol Mardhiyah, Rahmat and Idaya Husna, Mohd and Muhamad Khalil, Omar and Rosemaliza, Kamalludeen and Wan Mohd Zulhafiz, Wan Zahari and Nurhidayah, Azmy and Airil Haimi, Mohd Adnan (2022) Integrating Socio-Digital Skills in the Industry 4.0 era for graduates' employability: An employers’ perspective. Journal of Positive School Psychology, 6 (3). pp. 8493-8507. ISSN 2717-7564 (Online). (Published)

Ainul Naqueah, Zainal Abidin and Mohd Shukri, Mohd Aris and Ailin, Razali and Norazura, Ismail (2022) Prevention and Management Intervention (PMI) of occupational ototoxic exposure in industrial perspective globally : A systematic review. Malaysian Journal of Medicine and Health Sciences, 18. pp. 308-317. ISSN 1675-8544, (eISSN 2636-9346). (Published)

Ainur Munira, Rosli (2022) Microcutting performance monitoring – investigation on tool failure criterion. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Shahir, Jamaludin).

Aisha, Muhammad (2022) A generalized laser simulator algorithm for optimal path planning in constraints environment. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohammed Abdo, Hashem).

Aisyah I., Sulaiman and Mohd S., Ahmad and Roshahliza, M. Ramli and Waheb, A. Jabbar and Ammar, Tajuddin (2022) Performance analysis of sigfox deployment. In: Engineering Technology International Conference 2022 (ETIC 2022) , 7 - 8 September 2022 , Universiti Malaysia Pahang, Pahang. . (Unpublished) (Unpublished)

Aisyah Khaleeda, Rosli and Noor Raha, Mohd Radzuan (2022) Degree of Formality: Analyses of Linguistic Deviations in a Facebook Status and Comments Section. In: Spearheading Excellence in Humanities, Social Sciences and Business Management Research. Penerbit UMP, Kuantan, Pahang, pp. 1-6. ISBN 978-967-2831-36-5

Aizi Nor Mazila, Ramli and Sufihana, Yusof and Bhuyar, Prakash and Aimi Wahidah, Aminan and Saiful Nizam, Tajuddin and Hazrulrizawati, Abd Hamid (2022) Production of volatile compounds by a variety of fungi in artificially inoculated and naturally infected aquilaria malaccensis. Current Microbiology, 79 (151). pp. 1-14. ISSN 0343-8651. (Published)

Aizzuddin, A. M. and Asrudin, A. A. and Taib, M. Y. and Azmi, W. H. (2022) Soil characteristic study to improve heat conductivity capability in ground heat exchanger. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 707 -719.. ISSN 2195-4356 ISBN 978-981-19-1457-7 (Published)

Ajibike, Waliu Adeniyi and Adeleke, Adekunle Qudus and Muuka, Gerry Nkombo and Bamgbade, Jibril Adewale and Mohd Ridzuan, Darun and Moshood, Taofeeq Durojaye (2022) Impacts of oil and gas internal risk factors on project success : Moderating role of government support. Construction Economics and Building, 22 (1). pp. 47-69. ISSN 2204-9029. (Published)

Ajith, Gopi (2022) Performance modelling and analysis of a utility scale solar photovoltaic power plant in a tropical region. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sudhakar, Kumarasamy).

Akama, Shunsuke and Hobara, Yashuhide and Amir Izzani, Mohamed and Gomes, Chandima and Shiokawa, Kazuo and Hirai, Shu and Kikuchi, Hiroshi and Stock, Michael (2022) Spatio-temporal characteristics of energetic lightning in southeast asia : Preliminary statistical results. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 317-327., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4 (Published)

Akasyah, Mohd Khathri and Muhammad Yusri, Ismail and Abdul Adam, Abdullah and Rizalman, Mamat and Sutiman, . (2022) Performance, exhaust emissions and optimization using response surface methodology of a water in diesel emulsion on diesel engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (1). pp. 1-12. ISSN 2289-7879. (Published)

Akhtar, Shamim and Muhamad Zahim, Sujod and Rizvi, Syed Sajjad Hussain (2022) An Intelligent Data-Driven Approach for Electrical Energy Load Management Using Machine Learning Algorithms. Energies, 15 (15). ISSN 1996-1073. (Published)

Akhyari, Nasir and Ruzaini, Abdullah Arshah and Mohd Rashid, Ab Hamid and Syahrul, Fahmy (2022) Information Security Culture Concept towards Information Security Compliance: A Comparison between IT and Non-IT Professionals. International Journal of Integrated Engineering, 14 (3). pp. 157-165. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Akm Asif, Iqbal and Norfatihah, Ismail (2022) Mechanical properties and corrosion behavior of silica nanoparticle reinforced magnesium nanocomposite for bio-implant application. Materials, 15 (8164). pp. 1-11. ISSN 1996-1944. (Published)

Al Aliyani, Wafa Rashid and Lee, Chia Kuang (2022) A systematic review on identifying factors influencing total quality management implementation. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-4.. (Published)

Al Biajawi, Mohammad I. and Rahimah, Embong and Khairunisa, Muthusamy and Norasyikin, Ismail and Obianyo, Ifeyinwa I. (2022) Recycled coal bottom ash as sustainable materials for cement replacement in cementitious Composites: A review. Construction and Building Materials, 338 (127624). pp. 1-20. ISSN 0950-0618. (Published)

Al Dhahebi, Adel Mohammed and Jose, Rajan and Mazli, Mustapha and Mohamed Shuaib, Mohamed Saheed (2022) Ultrasensitive aptasensor using electrospun MXene/polyvinylidene fluoride nanofiber composite for Ochratoxin A detection. Food Chemistry, 390 (133105). pp. 1-10. ISSN 03088146. (Published)

Al Masud, Sheikh Mohammad Maniruzzaman and Rohana, Hamzah and Hasan, Ahmad (2022) Foreign Workers’ Recruitment and Reconsideration of Crucial Factors: A Sequential Exploratory Mixed-Methods Study of Migrant Labourers in Malaysia. Migration Letters, 19 (4). pp. 475-488. ISSN 1741-8992. (Published)

Al Masud, Sheikh Mohammad Maniruzzaman and Rohana, Hamzah and Hasan, Ahmad (2022) Foreign Workers’ Smooth Repatriation and Reassessment of Crucial Factors: A Mixed-Method Study of Migrant Labourers in Malaysia. International Journal of Management and Applied Science (IJMAS), 8 (4). pp. 29-39. ISSN 2394-7926. (Published)

Al Masud, Sheikh Mohammad Maniruzzaman and Rohana, Hamzah and Hasan, Ahmad (2022) Foreign workers’ recruitment and reconsideration of crucial factors : A sequential exploratory mixed-methods study of migrant labourers in Malaysia. Migration Letters, 19 (4). pp. 475-488. ISSN 1741-8984. (Published)

Al Masud, Sheikh Mohammad Maniruzzaman and Rohana, Hamzah and Hasan, Ahmad (2022) Re-evaluation of foreign workers' placement and repatriation factors. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 33.. (Published)

Al-Amoudi, Ibrahim and Rosdiyana, Samad and Nor Rul Hasma, Abdullah and Mahfuzah, Mustafa and Pebrianti, Dwi (2022) Automatic attendance system using face recognition with deep learning algorithm. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 573-588., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6 (Published)

Al-Amshawee, Sajjad Khudhur Abbas and Husain, Mohamed Saad Bala and Mohd Yusri, Yunus and Nor Fadhillah, Mohamed Azmin and Oladosu, Temidayo Lekan (2022) Extruded and overlapped geometries of feed spacers for solution mixing in electrochemical reactors and electrodialysis-related processes. Chemical Engineering Communications. pp. 1-26. ISSN 0098-6445. (Published)

Al-Attar, Alyaa A. and Hamada, Hussein Mahmood and Tayeh, Bassam A. and Awoyera, Paul Oluwaseun (2022) Exploring engineering properties of waste tire rubber for construction applications. In: Materials Today: Proceedings, 11th Solid State Surfaces and Interfaces Conference (SSSI 2020) , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. A1-A17., 53. ISSN 2214-7853 (Published)

Al-Bahr, Tareq M. and Sitti Asmah, Hassan and Othman, Che Puan and Nordiana, Mashros and Nur Sabahiah, Abdul Sukor (2022) Speed-flow-geometric relationship for urban roads network. Applied Sciences (Switzerland), 12 (9). pp. 1-23. ISSN 2076-3417. (Published)

Al-Dhahebi, Adel Mohammed and Ling, Jin Kiong and Syam, G. Krishnan and Yousefzadeh, Maryam and Elumalai, Naveen Kumar and Mohamed Saheed, Mohamed Shuaib and Seeram, Ramakrishna and Rajan, Jose (2022) Electrospinning research and products: The road and the way forward. Applied Physics Reviews, 9 (011319). pp. 1-44. ISSN 1931-9401. (Published)

Al-Douri, Yarub and Jose, Rajan (2022) Optical properties of quantum dots. In: Graphene, Nanotubes and Quantum Dots-Based Nanotechnology: Fundamentals and Application. Woodhead Publishing Series in Electronic and Optical Materials . Elsevier, New Delhi, India, pp. 631-663. ISBN 978-0-323-85457-3

Al-Hasanol Gumanti, Sudirman (2022) Non-contact Heart Rate Estimation using High Radio Frequency Radar. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Al-Madani, Mohammed and Fernando, Yudi and Pua, Wee Sin (2022) Blockchain Depolyment in Energy Supply Chain Management: Implications for Report Integrity. International Journal of Industrial Management (IJIM), 13 (1). pp. 408-421. ISSN 2289-9286 (Print); 0127-564x (Online). (Submitted) (Submitted)

Al-Madani, Mohammed and Fernando, Yudi and Pua, Wee Sin (2022) Implications of Blockchain Deployment in Energy Supply Chain Management: Report Integrity. International Journal of Industrial Management (IJIM), 13 (1). pp. 408-421. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Al-Madani, Mohammed Hammam Mohammed and Fernando, Yudi and Tseng, Ming-Lang (2022) Assuring Energy Reporting Integrity: Government Policy’s Past, Present, and Future Roles. Sustainability, 14 (22). pp. 1-24. ISSN 2071-1050. (Published)

Al-Madani, Mohammed Hammam Mohammed and Fernando, Yudi and Tseng, Ming-Lang and Abideen, Ahmed Zainul (2022) Uncovering four domains of energy management in palm oil production: a sustainable bioenergy production trend. Environmental Science and Pollution Research, 1 (1). pp. 1-18. ISSN 0944-1344. (Published)

Al-Mohammad, Mohammad S. and Ahmad Tarmizi, Haron and Esa, Muneera and Aloko, Mohammad Numan and Alhammadi, Yasir and K. S., Anandh and Rahimi, A. Rahman (2022) Factors affecting BIM implementation: evidence from countries with different income levels. Construction Innovation, ahead-of-pri. pp. 1-28. ISSN 1471-4175. (Published)

Al-Shoukry, Suhad and M. Jawad, Bushra Jaber and Zalili, Musa and Sabry, Ahmad H. (2022) Development of predictive modeling and deep learning classification of taxi trip tolls. Eastern-European Journal of Enterprise Technologies, 13 (3 (117)). pp. 6-12. ISSN 1729-3774. (Published)

Al-Shoukry, Suhad and Zalili, Musa and Amer, Duha and Kareem, Safaa Muhsen (2022) Development of images segmentation using image thresholder and batch processing technique on the blood smears. International Journal of Nonlinear Analysis and Applications (IJNAA), 13 (2). pp. 3251-3259. ISSN 2008-6822. (Published)

Al-hokabi, Abdulmajeed and Muzamir, Hasan and Amran, Mugahed and Fediuk, Roman and Vatin, Nikolai Ivanovich and Alshaeer, Honin (2022) The effect of POFA-gypsum binary mixture replacement on the performance of mechanical and microstructural properties enhancements of clays. Materials, 15 (4). pp. 1-23. ISSN 1996-1944. (Published)

Alabadla, Mustafa and Fatimah, Sidi and Iskandar, Ishak and Hamidah D., Ibrahim and Lilly Suriani, Affendey and Zafienas, Che Ani and A. Jabar, Marzanah Ab and Bukar, Umar Ali and Devaraj, Navin Kumar and Ahmad Sobri, Muda and Tharek, Anas and Noritah, Omar and Mohd Izham, Mohd Jaya (2022) Systematic review of using machine learning in imputing missing values. IEEE Access, 10. pp. 44483-44502. ISSN 2169-3536. (Published)

Alabdan, Rusul Hisham and Zainuddin, Y. (2022) The effect of market trends and customer relationship management for performance in microfinance institutions of developing countries. TELEMATIQUE, 21 (1). pp. 6033-6065. ISSN 1856-4194. (Published)

Alam, Mohammad Khurshed and M. H., Mohammed Faozi and A. R., Yusoff and M. Z., Zainol and Z., Khalil (2022) Fault Detection for Automotive Coil Spring Using Signal Processing Analysis. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 415-426.. ISBN 978-981-19-2890-1 (Published)

Alam, Mohammad Khurshed and Mohd Herwan, Sulaiman and Ferdowsi, Asma and Sayem, Md. Shaoran and Khair, Nazmus Sakib (2022) Moth Flame Optimization Algorithm including Renewable Energy for Minimization of Generation & Emission Costs in Optimal Power Flow. In: IEEE 5th Asia Conference on Energy and Electrical Engineering (ACEEE) , 8-10 July 2022 , Kuala Lumpur, Malaysia. pp. 41-45.. ISBN 978-1-6654-9933-0 (Published)

Alam, Mohammad Khurshed and Mohd Herwan, Sulaiman and Sayem, MD Shaoran and Chowdhury, Jannat Khair and Foysal, Md. and Akter Ringku, Md. Mahfuzur (2022) Study on criticality Minimizing Cost in power system with optimal design of stochastic wind power generators using moth flow optimization. In: Engineering Technology International Conference (ETIC 2022). Engineering Technology International Conference (ETIC2022) , 7 - 8 September 2022 , Universiti Malaysia Pahang, Pahang. pp. 323-328., 2022. ISBN 978-1-83953-782-0 (Published)

Alam, Mohammad Khurshed and Sulaiman, Mohd Herwan (2022) Optimal loading analysis with penalty factors for generators using brute force method. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 37-46., 842. ISSN 1876-1100 ISBN 978-981168689-4 (Published)

Alam Miah, Mohammad Badrul and Suryanti, Awang (2022) KDA: An unsupervised approach for analyzing keyphrases distance from news articles as a feature of keyphrase extraction. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 83.. (Published)

Albarqouni, Yasin M. Y. and Soon, Poh Lee and Ali, Gomaa A. M. and Ethiraj, Anita Sagadevan and Chong, Kwok Feng (2022) Facile synthesis of reduced graphene oxide aerogel in soft drink as supercapacitor electrode. Journal of Nanostructure in Chemistry, 12. pp. 417-427. ISSN 2008-9244 (Print); 2193-8865 (Online). (Published)

Alberto, V. and Gupta, Arun (2022) Various drying techniques for conversion of extracted chicken feather keratin solution to powder. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 8 (2). pp. 8-19. ISSN 0126-8139. (Published)

Alenzi, Eisa and Sitti Asmah, Hassan and Othman, Che Puan (2022) Car following behaviours on multilane highways in Kuwait: A case study on road 40 during winter season. Journal of Engineering Research, 10 (1B). pp. 86-102. ISSN 2307-1885. (Published)

Alfaz, Nazia and Sarwar, Talha and Das, Argho and Noorhuzaimi, Mohd Noor (2022) A densely interconnected convolutional neural network-based approach to identify COVID-19 from Chest X-ray Images. In: Lecture Notes in Electrical Engineering; 11th International Conference on Robotics, Vision, Signal Processing and Power Applications, RoViSP 2021 , 5-6 April 2021 , Virtual, Online. pp. 419-425., 829 LNEE (272139). ISSN 1876-1100 ISBN 978-981168128-8 (Published)

Alhafizul, Ibnohasim (2022) Development of power supply using solar energy for smart agriculture system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Alhaj, Nura Abdalrhman and Mohd Faizal, Jamlos and Sulastri, Abdul Manap and Bakhit, Abdelmoneim Ahmed and Rizalman, Mamat (2022) A review of multiple access techniques and frequencies requirements towards 6G. In: Proceedings - 2022 RFM IEEE International RF and Microwave Conference, RFM 2022 , 19-21 December 2022 , Kuala Lumpur. pp. 1-4. (187406). ISBN 978-166548977-5 (Published)

Alhamed, Abdulrahman and Mohd Romlay, Fadhlur Rahman and Muhammad, Khairul Fikri and Mohd Zawawi, Mohd Zairulnizam and Ishak, I. (2022) Support-free fused deposition modelling printing for overhangs structure. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 64-71. ISSN 2637-0883. (Published)

Ali Abdullah, Hassan and Salwani, Abdullah and Kamal Z., Zamli and Rozilawati, Razali (2022) Whale optimization algorithm strategies for higher interaction strength t-way testing. Computers, Materials and Continua, 73 (1). pp. 2057-2077. ISSN 1546-2218. (Published)

Ali Ibrahim, Muhammad Naqiuddin and Najib, M. S. and Mohd Daud, Suhaimi (2022) Correlation investigation of odour-profile and temperature intensity. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 48-57. ISSN 2637-0883. (Published)

Ali Imran, Awaludin and S. H., Tomadi and Rosdi, D. and Mas Ayu, H. (2022) Analysis and simulation of temperature distribution and stress development in wire edm of tungsten carbide. In: Journal of Physics: Conference Series, Third International Conference on Emerging Electrical Energy, Electronics and Computing Technologies 2021 , 16-17 December 2021 , Virtual Conference. pp. 1-12., 2312 (012046). ISSN 1742-6588 (Published)

Ali Laghari, Imtiaz and Samykano, Mahendran and Pandey, A.K and Said, Zafar and Kadirgma, K. and Tyagi, V.V. (2022) Thermal conductivity and Thermal properties enhancement of Paraffin/Titanium Oxide based Nano enhanced Phase change materials for Energy storage. Advances in Science and Engineering Technology International Conferences (ASET). pp. 1-5. ISSN 978-1-6654-1801. (Published)

Ali Muttaleb, Hasan (2022) Knowledge based semantic representation for semantic relatedness measurements. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Taha Hussein, Alaaldeen Rassem).

Ali Salah, Fatima Lardhi and Noor Raha, Mohd Radzuan (2022) Phonetic instruction in English language learning: Perceptions of Yemeni elementary students. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 133.. (Published)

Ali Zainal-Abidin, Mohamad Termizi (2022) The Mixing Of Solid Waste From Palm Acid Oil (PAO) And Palm Kernel Cake (PKC) As A Source Of Animal Feed (Free Range Chicken). Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ali Zainal-Abidin, Mohamad Termizi and Muhammad Amirul Syafiq, Nasarudin and Nurul Farah Anisa, Hairolnizam and Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Suryati, Sulaiman (2022) The mixing of solid waste from palm acid oil and palm kernel cake as a source of animal feed (free range chicken). In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 188.. (Published)

Aliman, Omar and Bakiss Hiyana, Abu Bakar and Khairunisa, Muthusamy and Albiajawi, Mohammad Ismail Yousef (2022) Rehabilitation of fire-damaged reinforced concrete members by using fiber-reinforced polymers and ultra-high fiber reinforced concrete: An overview. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 59.. (Published)

Aliman, Omar and Bakiss Hiyana, Abu Bakar and Khairunisa, Muthusamy and Mohammad Ismail Yousef, AlBiajawi (2022) Effect of fire exposure on mechanical properties of normal strength concrete: An overview. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 60.. (Published)

Alisha, E. and Najwa, N. and Jamaludin, A. S. and Razali, M. N. M. and Saffe, S. N. M. (2022) Analysis on auger pump performance during handling high viscous liquid. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 48-54. ISSN 2636-9575. (Published)

Aliyah, Jamaludin and Che Ku Mohammad Faizal, Che Ku Yahya (2022) Direct energy conversion from metroxylon sagu via multienzyme catalysis in enzymatic biofuel cell. Materials Science Forum, 1069. pp. 193-199. ISSN 1662-9752. (Published)

Aliyah, Jamaludin and Che Ku Mohammad Faizal, Che Ku Yahya (2022) Membraneless enzymatic biofuel cell powered by starch biomass. In: 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3-5 November 2021 , Universiti Malaysia Pahang (Virtual Conference). pp. 1-8., 2610 (1). ISBN 978-0-7354-4378-5 (Published)

Aljaerani, Hatem Ahmad and M., Samykano and A. K., Pandey and K., Kadirgama and George, Mathew and R., Saidur (2022) Thermophysical properties enhancement and characterization of CuO nanoparticles enhanced HITEC molten salt for concentrated solar power applications. International Communications in Heat and Mass Transfer, 132 (105898). pp. 1-9. ISSN 0735-1933. (Published)

Almanifi, Omair Rashed Abdulwareth and Ahmad Fakhri, Ab. Nasir and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Abdul Majeed, Anwar P. P. (2022) Heartbeat murmurs detection in phonocardiogram recordings via transfer learning. Alexandria Engineering Journal, 61 (12). pp. 10995-11002. ISSN 1110-0168. (Published)

Almanifi, Omair Rashed Abdulwareth and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed (2022) Human activity recognition based on wrist PPG via the ensemble method. ICT Express. pp. 1-5. ISSN 2405-9595. (In Press / Online First) (In Press / Online First)

Almuallim, Basel and Wan Sharuzi, Wan Harun and Al Rikabi, Ihab Jabbar and Mohammed, Hussein A. (2022) Thermally conductive polymer nanocomposites for filament-based additive manufacturing. Journal of Materials Science, 57 (6). 3993 -4019. ISSN 0022-2461. (Published)

Almuhaya, Mukarram A. M. and Jabbar, Waheb A. and Noorazliza, Sulaiman and A. H. A., Sulaiman (2022) An Overview on LoRaWAN Technology Simulation Tools. In: IRICT 2021: Advances on Intelligent Informatics and Computing , 22-23 December 2021 , Virtual Conference. pp. 345-358., 127. ISBN 978-3-030-98741-1 (Published)

Almuhaya, Mukarram A. M. and Jabbar, Waheb A. and Noorazliza, Sulaiman and Abdulmalek, Suliman (2022) A Survey on LoRaWAN Technology: Recent Trends, Opportunities, Simulation Tools and Future Directions. Electronics, 11 (1). pp. 1-32. ISSN 2079-9292. (Published)

Almurisi, Samah Hamed and AL-japairai, Khater Ahmed Saeed and Alshammari, Farhan and Alheibshy, Fawaz and Sammour, Rana M.F. and Doolaanea, Abd Almonem (2022) Stability of paracetamol instant jelly for reconstitution: Impact of packaging, temperature and humidity. Gels, 8 (3). pp. 1-14. ISSN 2310-2861. (Published)

Alshaeer, Honin Ali Yahya and Irwan, J. M. and Alshalif, Abdullah Faisal and Al-Fakih, Amin and Ewais, Dina Yehia Zakaria and Salmi, Abdelatif and Alhokabi, Abdulmajeed Ali (2022) Review on carbonation study of reinforcement concrete incorporating with bacteria as self-healing approach. Materials, 15 (5543). pp. 1-17. ISSN 1996-1944. (Published)

Alyaa Afiqah, Zi @Fauzi and Rahayu, Rahmad and Mohamad Shaiful, Abdul Karim and Faiz, Arith and Ahmad Syahiman, Mohd Shah (2022) Chlorophyll’s dependency towards electrical characteristics of banana midrib-based dye- sensitized solar cell for waste management solution. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 114.. (Published)

Alzaghir, Abdullah Faisal and Mohd Nazir, Mat Nawi and Asmelash, Mebrahitom Asmelash and Azmir, Azhari (2022) Optimization of waterjet paint removal operation using artificial neural network. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 11-20., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Alzaghir, Abdullah Faisal and Mohd Nazir, Mat Nawi and Gebremariam, Mebrahitom Asmelash and Azmir, Azhari (2022) Optimization of waterjet paint removal operation using artificial neural network. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 11-20., 900. ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Amar Hakimi, Bahar (2022) Voltage Instability Analysis For Electrical Power System Using Voltage Stability Index. College of Engineering, Universiti Malaysia Pahang.

Ameen, H. AL-A. Nader and P. J., Ramadhansyah (2022) Performance of Asphalt Mixture Incorporated Encapsulated Cigarette Butts as Bitumen Modifier. Construction, 2 (1). pp. 10-21. ISSN 2785-8731. (Published)

Ameen Ali, Mohammed Ba Homaid (2022) A hybrid kidney algorithm strategy for combinatorial interaction testing problem. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahman Ahmed, Mohammed Al-Sewari).

Ameerah Humaira', Mohamad Hilmi and Nur Hartini, Mohd Hatta (2022) Penerbit UMP lancar 6 buah buku terbitan terkininya. UMP News .

Ameerah Humaira', Mohamad Hilmi and Nur Hartini, Mohd Hatta (2022) UMP Press publishes 6 new books. UMP News .

Amer Hudhaifah, Hamzah and Wan Ahmad Fauzi, Wan Husain (2022) Batu Tarsilah Sebagai Alat Kebesaran dan Kedaulatan: Salasilah Raja Brunei Dinilai dari Segi Ilmu Nasab Islam [Batu Tarsilah Being Regalia And Symbol Of Sovereign: The Pedigree Of Brunei Sultanate Viewed From Islamic Lineage Perspective]. Jurnal Islam dan Masyarakat Kontemporari (JIMK), 23 (3). pp. 245-272. ISSN 1985-7667. (Published)

Amerrudin, Azizi and Norazlianie, Sazali and Mohd Nizar, Mhd Razali and Muhamad Zahim, Sujod and Ahmad Afif, Mohd Faudzi and Siregar, Januar Parlaungan (2022) Investigation of stabilizing internal temperature and humidity of peltier-based cooling refrigerator supplied by small scale PV. In: Engineering Technology International Conference (ETIC 2022). Engineering Technology International Conference (ETIC 2022) , 7-8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 159-163., 2022. ISBN 978-1-83953-782-0 (Published)

Amerrudin, Azizi and Norazlianie, Sazali and Mohd Nizar, Mhd Razali and Muhamad Zahim, Sujod and Ahmad Afif, Mohd Faudzi and Siregar, Januar Parlaungan (2022) Investigation of stabilizing internal temperature and humidity of peltierbased cooling refrigerator supplied by small scale PV. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 159-163., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)

Amiera Azwa, Abdul Ghafar and Noraini, Mohd Razali (2022) The significant of lean practice on the sustainability performance in automotive manufacturing industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 83-89. ISSN 2636-9575. (Published)

Amiir Haamzah, Mohamed Ismail and Anwar, P. P. Abdul Majeed and E. H., Yap and A. H. P., Tan and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and M. A., Abdullah (2022) The employment of transfer learning for Covid-19 diagnostics: A ResNet evaluation. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 128.. (Published)

Aminatul Nor, Mohamed Said (2022) Pengarah MIDA Pahang berkunjung ke UMP buka peluang usaha sama Industri-Akademia dan Penempatan Kerjaya. UMP News .

Aminatul Sobirah, Zahari (2022) Effect of molecular weight on Piezoelectric properties of electrospun polyvinylidene fluoride blended with cellulose nanocrystals. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Hafiz, Mazwir).

Aminuddin, Afrig and Ernawan, F. (2022) AuSR2: Image watermarking technique for authentication and self-recovery with image texture preservation. Computers & Electrical Engineering, 102. pp. 108-207. ISSN 0045-7906. (Published)

Aminuddin, Afrig and Ernawan, Ferda (2022) AuSR1 : Authentication and self-recovery using a new image inpainting technique with LSB shifting in fragile image watermarking. Journal of King Saud University - Computer and Information Sciences. pp. 1-19. ISSN 1319-1578. (In Press / Online First) (In Press / Online First)

Aminuddin, Afrig and Ernawan, Ferda (2022) AuSR1: Authentication and self-recovery using a new image inpainting technique with LSB shifting in fragile image watermarking. Journal of King Saud University - Computer and Information Sciences, 34 (8). pp. 5822-5840. ISSN 1319-1578. (Published)

Amir, Abdul Razak (2022) Hybrid Solar Heat Pump Dryer for Marine Products. FTKMA Bulletin (3). p. 26. ISSN 2773-594X

Amir, Abdul Razak and A. F., Sharol and Z. A. A., Majid and M. A. A., Azmi and M. A. S. M., Tarminzi and Ming, Y. H. and Z. A, Zakaria and M. A, Harun and A., Fazlizan and K., Sopian (2022) Effect of thermal energy storage material on the performance of double-pass solar air heater with cross-matrix absorber. Journal of Energy Storage, 51 (104494). pp. 1-15. ISSN 2352-152X. (Published)

Amir Asyraf, Mohd Fauzi (2022) Satellite-Based Risk Analysis Mapping For Urban Development In Kuantan District, Pahang. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Amir Farhan, Mohd Rasidi (2022) The Design For An Aerial Monitoring System For Environmental Surveillance Applications. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Amir Izzani, Mohamed and Mohd Razali, Daud and Mohd Herwan, Sulaiman and Ahmad Afif, Mohd Faudzi and Norlin, Pauzi and Mohamad Kamarol, Mohd Jamil (2022) Inactivation of mucose on bread by using plasma jet. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 1125-1131., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6 (Published)

Amir Muhammad Hafiz, Othman (2022) Machine Learning Malware Detection For Android. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Amirah, Ya'acob (2022) Study on the microbial growth inhibition by using pineapple leaves juice. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazwina, Zainol).

Amirah, Ya'acob and Norazwina, Zainol and Kamaliah, Abdul Samad (2022) Pineapple leaf juice characterization and kinetic study on microbial growth inhibition. Jurnal Teknologi, 84 (2). 133 -144. ISSN 0127-9696. (Published)

Amirah Nurhafizah, Abu Bakar and Nuratiqah, Mohd Isa and Mohamad Shaiful, Abdul Karim and Ruhaizad, Ishak and Suazlan, Mt Aznam and Ahmad Syahiman, Mohd Shah (2022) Study of linear-correlation based solar irradiance measurement device photovoltaic application. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 805-819., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Amiril Sahab, Abdul Sani and Shahandzir, Baharom and Noor Asimah, Mamat and Amirah Sakinah, Mohd Rozlan and Norfazillah, Talib (2022) Comparative evaluation of crude Tamanu oil performance as metalworking fluids. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1783-1788., 48 (Part 6). ISSN 2214-7853 (Published)

Amiril Sahab, Abdul Sani and Zubaidah, Zamri and Puteri Humairah, Megat Ahmad Radzi and Ainaa Mardhiah, Sabri and Norfazillah, Talib (2022) Modified Tamanu Plant-Based Oil from Pahang Malaysia as biodegradable metalworking fluids. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics & Material Forum 2022, iM3F 2022 , 20 - 20 July 2022 , Pekan, Pahang. 39 -45., 75 (149158). ISSN 2214-7853 (Published)

Amirudin, Zulkepli (2022) Frit-based controller tuning of a dc-dc boost converter. College of Engineering, Universiti Malaysia Pahang.

Amirul Hafiiz, Ruhaimi and Che Ku Nor Liana, Che Ku Hitam and Muhammad Arif, Ab Aziz and Norul Hisham, A. Hamid and Herma Dina, Setiabudi and Teh, L. P. (2022) The role of surface and structural functionalisation on graphene adsorbent nanomaterial for CO2 adsorption application : Recent progress and future prospects. Renewable and Sustainable Energy Reviews, 167 (112840). pp. 1-22. ISSN 1364-0321. (Published)

Anati, N. and Aqida, S. N. and Ismail, Nurazima and Kasim, M. S. (2022) Mechanical characterisation of water-jet shot peened H13 tool steel surface. Journal of Mechanical Engineering and Sciences (JMES), 16 (3). 9122 -9128. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Anbananthan Pillai, Munanday (2022) Facial recognition for human disposition identification. College of Engineering, Universiti Malaysia Pahang.

Anis Hazirah ‘Izzati H., Al-Hadi and Aqib Fawwaz, Mohd Amidon and Nurlaila F., Ismail and Siti Mariatul Hazwa, Mohd Huzir and Zakiah, Mohd Yusoff and Saiful Nizam, Tajuddin and Mohd Nasir, Taib (2022) Statistical analysis of high grade samples from four grades Aquilaria Malaccensis oil. In: 2022 IEEE 10th Conference on Systems, Process & Control (ICSPC) , 17 December 2022 , Hatten Hotel Melaka, Malaysia. pp. 117-122. (185865). ISBN 978-166547098-8 (Published)

Anis Naema Atiyah, Rafai and Noraziah, Adzhar and Nor Izzati, Jaini (2022) A review on path planning and obstacle avoidance algorithms for autonomous mobile robots. Journal of Robotics, 2022 (2538220). pp. 1-14. ISSN 1687-9600. (Published)

Anisha Banu, Dawood Gani (2022) Determinants and practices towards cyber supply chain performance with cyber supply chain visibility as a mediator. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Yudi, Fernando).

Annamalai, Nagaletchimee and Ramírez García, Antonia and Mažeikienė, Viktorija and Alqaryouti, Marwan Harb and Radzuwan, Ab Rashid and Uthayakumaran, Arulselvi (2022) A phenomenological study of online assessment during a pandemic crisis : Insights from Malaysia, Lithuania, and Spain. Frontiers in Psychology, 13 (957896). pp. 1-11. ISSN 1664-1078. (Published)

Anuar, Mohamed (2022) 2d08 formulation of machine learning model to classify human motion based on kinematics data of daily activities. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang.

Anuar, Mohamed and Nur Aqilah, Othman and Hamzah, Ahmad and Mohd Hasnun Ariff, Hassan (2022) Investigation of the optimal sensor location and classifier for human motion classification. In: ICCSCE 2022 - Proceedings: 2022 12th IEEE International Conference on Control System, Computing and Engineering , 21-22 October 2022 , Penang. pp. 142-146. (184194). ISBN 978-166548339-1 (Published)

Anwar, M. Shahril and Rasid, Mohd Azri Hizami (2022) Evaluation of direct-quadrature position and saturation of a SynRM machine with segmented rotor. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 1-5. ISSN 2637-0883. (Published)

Anwary, Arif Reza and Rahman, Md Arafatur and Abu Jafar, Md Muzahid and Ul Ashraf, Akanda Wahid and Patwary, Mohammad Nuruzzaman and Hussain, Amir (2022) Deep learning enabled fall detection exploiting gait analysis. In: Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS; 44th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2022 , 11-15 July 2022 , Glasgow. pp. 4683-4686., 2022-July (182637). ISSN 1557-170X ISBN 978-172812782-8 (Published)

Arif Mustaqim, Md Salleh and Ahmad Yusri Aizad, Ahamad Termuzi and Aili, Debora Anak and Nurmunira, Muhammad (2022) The installation of solar panel plant based on the site selection assessment, solar irradiance and slope analysis in malaysia. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 221.. (Published)

Ariffin, Arifuddin and A. A.M., Redhwan and A. M., Syafiq and S., Zainal Ariffin and A. R.M., Aminullah and Wan Hamzah, Azmi (2022) Stability analysis of hybrid Al2O- TiO2 nano-cutting fluids. Archives of Materials Science and Engineering, 117 (1). pp. 5-12. ISSN 1897-2764. (Published)

Arifin, Samsul and Muktyas, Indra Bayu and Al Maki, Wikky Fawwaz and Mohd Khairul Bazli, Mohd Aziz (2022) Graph coloring program of exam scheduling modeling based on bitwise coloring algorithm using python. Journal of Computer Science, 18 (1). pp. 26-32. ISSN 1549-3636. (Published)

Arifin, Zainal and Adiyasa, I. Wayan and Mohd Azri Hizami, Rasid (2022) Design optimization analysis on the performance of BLDC motors on electric bicycles. In: Journal of Physics: Conference Series ; 5th International Conference on Electrical, Electronics, Informatics, and Vocational Education, ICEELINVO 2022 , 5-6 October 2022 , Yogyakarta. pp. 1-9., 2406 (012016). ISSN 1742-6588 (Published)

Arifuddin, Ariffin and Abd Aziz, Mohammad Redhwan and Wan Hamzah, Wan Azmi and Nurul Nadia, Mohd Zawawi (2022) Performance of Al2O3/TiO2 hybrid nano-cutting fluid in mql turning operation via RSM approach. Lubricants, 10 (366). pp. 1-16. ISSN 2075-4442. (Published)

Arman, Salih and Mohd Nadzeri, Omar and Nasrul Hadi, Johari and Mohd Hasnun, Arif Hassan (2022) Effect of using anti-wear and friction modifier-based additives on tribological performance of engine lubricants. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 54-60., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)

Arwa Mukhtar, Makki Kanani (2022) The enhanced model of hyperledger composer supply chain (hcsc) for the product environmental in supply chain networks. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Awanis, Romli).

Asar, A. K. (2022) Three ṭalaqs in one session from the perspective of maqaṣid al-sharīah. International Journal of Humanities Technology and Civilization (IJHTC), 7 (2). pp. 62-66. ISSN 2289-7216. (Published)

Asghar, Rafiq and Mohd Herwan, Sulaiman and Saeed, Sarmad and Wadood, Hamid and Mehmand, Taimoor Khan and Ullah, Zahid (2022) Application of linear and nonlinear control schemes for the stability of smart grid. In: ICETECC 2022 - International Conference on Emerging Technologies in Electronics, Computing and Communication , 7-9 December 2022 , Jamshoro, Sindh. pp. 1-6. (187454). ISBN 978-166549087-0 (Published)

Asghar, Rafiq and Mohd Herwan, Sulaiman and Zuriani, Mustaffa and Ali, Zohaib and Ullah, Zahid (2022) Integration of electric vehicles in smart grids : A review of the advantages and challenges of vehicle-to-grid technology. In: 2022 International Conference on IT and Industrial Technologies, ICIT 2022 , 3-4 October 2022 , Chiniot. pp. 1-7. (185677). ISBN 978-166548945-4 (Published)

Asghar, Rafiq and Ullah, Zahid and Azeem, Babar and Aslam, Sheraz and Hashmi, Muhammad Harris and Rasool, Ehtsham and Shaker, Bilawal and Anwar, Muhammad Junaid and Mustafa, Kainat (2022) Wind energy potential in Pakistan : A feasibility study in sindh province. Energies, 15 (8333). pp. 1-23. ISSN 1996-1073. (Published)

Ashaa, Supramaniam and Muhammad Aizzat, Zakaria and Mohamad Heerwan, Peeie and Papaioannou, Gerogious (2022) Investigating vehicle characteristics behaviour for roundabout cornering. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang, Kuantan. 519 -528., 900. ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Asiah, Kassim (2022) Embracing the endemic phase - Msctils goes hybrid. Centre for Modern Languages News .

Asmadi, Ali and Rosli, Mohd Yunus and Mohamad, Awang and Sofiah, Hamzah and Mohammad Hakim, Che Harun and Fazureen, Azaman and Muhammad Abbas, Ahmad Zaini (2022) Polysulfone/Cellulose Acetate Phthalate/Polyvinylpyrrolidone (PSf/CAP/PVP) Blend Membranes: Effect of Evaporation Time on Blend Membrane Characteristics. In: Design in Maritime Engineering. Advanced Structured Materials book series (STRUCTMAT), 167 . Springer Champ, Cham, pp. 145-152. ISBN 978-3-030-89987-5(Printed); 978-3-030-89988-2(Online)

Asri Syahmi, Asnor (2022) Successful implementation of erosion and sedimentation control plan for reducing environmental impact in the construction industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahimi, Abdul Rahman).

Asri Syahmi, Asnor and Al-Mohammad, Mohammad S. and Saffuan, Wan Ahmad and Almutairi, Saud and Abdul Rahimi, Abdul Rahman (2022) Challenges for implementing environmental management plans in construction projects : The case of Malaysia. Sustainability (Switzerland), 14 (10). pp. 1-17. ISSN 2071-1050. (Published)

Asrol, Awang (2022) Dr Yuserrie dilantik Naib Canselor UMP. Harian Metro .

Asrol, Awang (2022) Dua dekad capai kegemilangan UMP perkasa bidang TVET. Berita Harian .

Asrol, Awang (2022) Dugaan hilang 3 insan ketika pengajian. Berita Harian .

Asrol, Awang (2022) Graduan UMP perlu bijak rebut peluang - Abi Musa. Berita Harian .

Asrol, Awang (2022) Guna PerantiSiswa sebaik mungkin. Harian Metro .

Asrol, Awang (2022) Jualan nombor plat khas UC cecah RM3 juta. Harian Metro .

Asrol, Awang (2022) Nombor plat khas UC boleh dibida. Harian Metro .

Asrol, Awang (2022) Rahmad Mega buat kejutan kepada anak. Harian Metro .

Asrol, Awang (2022) UMP cipta Rajawali. Berita Harian .

Asrol, Awang (2022) UMP diiktiraf di persada antarabangsa. Berita Harian .

Asrol, Awang (2022) UMP jalin kerjasama dua universiti Turkiye. Berita Harian .

At-Tasneem, Mohd Amin and Wan Azmi, Wan Hamzah and Mohd Azmi, Ismail (2022) Thermo-Hydraulic Performance of Heated Tube with Twisted Delta Winglet Swirler Insert: A Numerical Simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 100 (1). pp. 181-200. ISSN 2289-7879. (Published)

Atalla, Y. and Hashim, Y. and Abdul Nasir, Abd Ghafar (2022) The impact of channel fin width on electrical characteristics of Si-FinFET. International Journal of Electrical and Computer Engineering, 12 (1). pp. 201-207. ISSN 2088-8708. (Published)

Atalla, Yousif and Hashim, Yasir and Abdul Nasir, Abd Ghafar (2022) The impact of channel fin width on electrical characteristics of Si-FinFET. International Journal of Electrical and Computer Engineering (IJECE), 12 (1). pp. 201-207. ISSN 2088-8708. (Published)

Athirah, Ruzaini and Nur Hartini, Mohd Hatta (2022) UMP Press, Perbadanan Kota Buku intensify book marketing efforts to international market. UMP News .

Athirah, Ruzaini and Safriza, Baharuddin (2022) Penerbit UMP terbit kamus kompetensi pertama di Malaysia. UMP News .

Atik, Faysal (2022) Noise eliminated ensemble empirical mode decomposition scalogram analysis for rotating machinery fault diagnosis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ngui Wai, Keng).

Atik, Faysal and W. K., Ngui and M. H., Lim and M. S., Leong (2022) Ensemble Augmentation for Deep Neural Networks Using 1-D Time Series Vibration Data. Journal of Vibration Engineering & Technologies. pp. 1-25. ISSN 2523-3939. (Published)

Attirmizi, Zulkifli (2022) Development of Internet of Thing (IoT) system for monitoring ruminant grass growth enviroment in vertical farming system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Auni Hamimi, Idris and Che Azurahanim, Che Abdullah and Nor Azah, Yusof and Mohd Basyaruddin, Abdul Rahman (2022) One-pot synthesis of iron oxide nanoparticles: Effect of stirring rate and reaction time on its physical characteristics. Inorganic and Nano-Metal Chemistry. pp. 1-7. ISSN 2470-1556. (In Press / Online First) (In Press / Online First)

Auni Hasyilah, Abu Yazid (2022) Effectiveness Of Using Liquid Organic Fertilizer From Oil Palm Empty Fruit Bunch Fiber Waste On Plants Growth. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Auni Zahidah, Mohd Rasol (2022) Gripper configuration and control design on omnidirectional mobile manipulator arm. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Awalin, Lilik J. and Syahirah, Abd Halim and Syahiman, . and Nor Azuana, Ramli and Naidu, Kanendra and Bazilah, Ismail and Wani, Rosli and Ibrahim, Ali (2022) Dynamic modeling of power network-integrated wind turbine. Wind Engineering. pp. 1-14. ISSN 2048-402X. (Published)

Awalin, Lilik Jamilatul and Syahirah, Abd Halim and Nor Azuana, Ramli and Jafferi, Jamaluddin and Mohd Syukri, Ali (2022) Wide area monitoring system control management of the IEEE-14 bus system using least square support vector regression. Indonesian Journal of Electrical Engineering and Computer Science, 27 (2). pp. 780-792. ISSN 2502-4752. (Published)

Awi, Anis Aniza and Muhamad Tamyez, Puteri Fadzline (2022) Kumpulan Fokus. In: Metodologi kuantitatif dan kualitatif dalam sains sosial. Penerbit Universiti Malaya, Universiti Malaya, Kuala Lumpur, pp. 39-58. ISBN 978-967-488-230-3

Ayanasamy, Kohmalam and Baharudin, Aishah and Jamek, Shariza and Saufi, S. M. and Hairom, Nur Hanis Hayati and Mohd Sueb, M. S. (2022) High sugar production from hydrolysate of pineapple residues via integrated enzyme-membrane system. Chemical Engineering and Technology, 45 (10). 1777 -1784. ISSN 0930-7516. (Published)

Ayasrah, Omar and Faiz, Mohd Turan (2022) Assessing integrated TOPSIS Model with exponential intuitionistic entropy measure: A case study. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 49-57., 1. ISBN 978-981-19-2890-1 (Published)

Ayman, Mohammad Mansour and Al Biajawi, Mohammad Ismail Yousef (2022) The effect of the addition of metakaolin on the fresh and hardened properties of blended cement products : A review. In: Materials Today: Proceedings. The 14th AUN/SEED-Net Regional Conference on Materials and 4th International Postgraduate Conference on Materials, Minerals and Polymer (RCM & MAMIP 2021). , 2022 . pp. 2811-2817., 66. ISSN 2214-7853 (Published)

Azam, M. and Hassan, S. A. and Puan, O. C. and Azhari, S. F. and Faiz, R. U. (2022) Performance of autonomous vehicles in mixed traffic under different demand conditions. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10050-10062. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Azizol Heirey, Bahari and Zamzuri, Hamedon (2022) Lean management in quality improvement of cutting and hot forming process for window tint. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 70.. (Published)

Azizol Heirey, Bahari and Zamzuri, Hamedon (2022) Quality improvement in cutting process of window tint using DMAIC approach. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 17-20., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)

Azizul Helmi, Sofian (2022) Aplikasi Teknologi Realiti Terimbuh dalam mendidik masyarakat mendepani marabahaya bencana. UMP News .

Azizul Helmi, Sofian (2022) What can we do in light of the Global Risks Report 2022 s ranking of the world s greatest threats. UMP News .

Azmana, Motia and Mohd Azmir, Arifin and Syed, Mahmood (2022) Review on transfersomes : Promising carrier for transdermal drug delivery. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 151.. (Published)

Azra Shakira, Hassan and Nurul Huda, Abu Bakar (2022) Structural, optical and morphological properties of pure and silver doped zinc oxide thin films. In: Materials Today: Proceedings, 3rd Symposium on Industrial Science and Technology (SISTEC2021) , 25-26 August 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1376-1380., 51 (Part 2). ISSN 2214-7853 (Published)

Azri, Qurratul Aini and Mat Jahari, Fatini Illyana and Jahir Hussain, Fathima Shahitha and Zulkifli, Farah Hanani (2022) Synthesis and characterization of bromelain enzyme/poly (vinyl alcohol) as potential bone scaffold. Current Science and Technology (CST), 2 (1). pp. 67-73. ISSN 2785-8804. (Published)

Azrina, Abd Aziz and Fatema, Khatun and Minhaj, Uddin Monir and Lan Ching, Sim and Kah Hon, Leong (2022) TiO2 A semiconductor photocatalyst. In: Titanium Dioxide. Advances and Applications . InTechOpen, Malaysia, pp. 47-57. ISBN 978-1-83969-476-9 (Printed); 978-1-83969-477-6(Online)

Azrizulazmi, Bustan (2022) The impacts of the university policies during covid-19 pandemic towards academic operation, financial, facilities and staff operation in universiti malaysia pahang: A dematel based model. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Lee, Chia Kuang).

B

B., Pal and A., Yasin and V., Sunil and Z., Sofer and C. -C., Yang and R., Jose (2022) Enhancing the materials circularity: from laboratory waste to electrochemical capacitors. Materials Today Sustainability, 20 (100221). pp. 1-10. ISSN 2589-2347. (Published)

B. A., Solahuddin and F. M., Yahaya (2022) Properties of concrete containing shredded waste paper as an additive. In: Materials Today: Proceedings, The 3rd Symposium on Industrial Science and Technology (SISTEC 2021) , 25-26 August 2021 , Universiti Malaysia Pahang (Virtual Conference). pp. 1350-1354., 52 (Part 2). ISSN 2214-7853 (Published)

Babu, Devin and Abdul, Nasir and A. S., Jamaludin and Muhammad Hisyam, Rosle (2022) Holding, grasping and sensing of prosthetic robot arm like a real human hand, a journey beyond limits: An extensive review. In: Human-Centered Technology for a Better Tomorrow: Proceedings of HUMENS 2021 , 22 February 2020 , Pekan, Pahang, Malaysia. pp. 485-504.. ISBN 978-981-16-4115-2 (Published)

Babu, Devin and Abdul Nasir, Abd Ghafar and Farag, Mohannad and M. H., Muhammad Sidik (2022) Development of Prosthetic Robotic Arm with Patient Monitoring System For Disabled Children; Preliminary Results. In: 9th International Conference on Electrical and Electronics Engineering (ICEEE 2022) , 29-31 March 2022 , Alanya, Turkey. pp. 1-7.. ISBN 978-1-6654-6754-4 (Published)

Babu Arigela, Sri Satya Veerendra (2022) Hybrid power management for fuel cell-supercapacitor powered hybrid electric vehicle. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rusllim, Mohamed).

Badhrulhisham, Abdul Aziz (2022) Industri Perlombongan Negara dan matlamat pembangunan mampan SDG satu tinjauan. UMP News .

Badhrulhisham, Abdul Aziz (2022) Mat Kilau dan Hasil Bumi Negara. UMP News .

Badraddin, Abdulmalek Khaled Mohammed and Afiqah R., Radzi and Almutairi, Saud and Rahimi, A. Rahman (2022) Critical success factors for concrete recycling in construction projects. Sustainability, 14 (5). pp. 1-19. ISSN 2071-1050. (Published)

Bahamid, Rami A. and Doh, Shu Ing and Muhamad, Azry Khoiry and Kassem, Mukhtar A. and Al-Sharafi, Mohammed A. (2022) The Current Risk Management Practices and Knowledge in the Construction Industry. Buildings, 12 (7). pp. 1-13. ISSN 2075-5309. (Published)

Baharuddin, N. J. and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin (2022) Study on die shoulder patterning method (DSPM) to minimise springback of U-bending. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9509-9518. ISSN 2180-1606. (Published)

Bahirah, Mohd Bashah and Ku Muhammad Naim, Ku Khalif and Nor Azuana, Ramli (2022) Classification of cervical cancer using random forest. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 57.. (Published)

Bakhit, Abdelmoneim Ahmed and Mohd Faizal, Jamlos and Alhaj, Nura Abdalrhman and Rizalman, Mamat (2022) Biofloc farming with IoT and machine learning predictive water quality system. In: Proceedings - 2022 RFM IEEE International RF and Microwave Conference, RFM 2022 , 19-21 December 2022 , Kuala Lumpur. pp. 1-4. (187406). ISBN 978-166548977-5 (Published)

Bakhit, Abdelmoneim Ahmed and Mohd Faizal, Jamlos and Alhaj, Nura Abdalrhman and Rizalman, Mamat and Hamza, Jamilu B. (2022) Smart home applications based on internet of things: Current scenario, issues and proposed solutions. In: 2022 IEEE International RF and Microwave Conference (RFM) , 19-21 December 2022 , Kuala Lumpur. pp. 1-4. (187406). ISBN 978-166548977-5 (Published)

Bakhtyari, Mohammad Basir and Hafizoah, Kassim (2022) English language speaking anxiety among Afghan University students. Journal of Curriculum and Teaching, 11 (8). pp. 238-249. ISSN 1927-2677. (Published)

Bakiss Hiyana, Abu Bakar (2022) A solution to finite escape time in H∞ filter slam. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Hamzah).

Bakiss Hiyana, Abu Bakar and Hamzah, Ahmad (2022) H∞Filter with fuzzy logic estimation : An analysis to refrain Finite Escape Time (FET). In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 909-921., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6 (Published)

Bambang Widi, Pratolo and Nur, Fatimah and Soviyah, . and Zuraina, Ali (2022) Digital Literacy readiness: Voices of Indonesian Primary and Secondary English Teachers. English Language Teaching Educational Journal, 5 (2). pp. 129-142. ISSN 2621-6485. (Published)

Bambang Widi, Pratolo and Nur, Fatimah and Soviyah, . and Zuraina, Ali (2022) Digital literacy readiness Voices of Indonesian primary and secondary English teachers. English Language Teaching Educational Journal, 5 (2). pp. 129-142. ISSN 2621-6485. (Published)

Basar, Mohd Nur Fadzly and Noraina Mazuin, Sapuan (2022) Retirement financial wellness index: Conceptual framework and research agenda. In: 12th Creation, Innovation, Technology & Research Exposition (CITREX 2022) , 11 March 2022 , Virtual Event. p. 1.. (Published)

Bashir, M. Nasir and Saad, Hafiz Muhammad and Muhammad, Rizwan and Quazi, Moinuddin Mohammed and Ali, Muhammad Mahmood and Ahmed, Arslan E.M. and Zaidi, Asad Ali and Soudagar, Manzoore Elahi M. and Haseeb, Abdul S.Md Abdul and Naher, Sumsun (2022) Effects of tin particles addition on structural and mechanical properties of eutectic Sn–58Bi solder joint. Journal of Materials Science: Materials in Electronics, 33 (28). pp. 22499-22507. ISSN 0957-4522. (Published)

Basma Yahya Muaydh, Ahmed Alashwal (2022) Synthesis, characterization and optimization of chicken feather-based keratin biopolymers. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Arun, Gupta).

Benraghda, Abdelmadjid and Noor Raha, Mohd Radzuan and Lardhi, Fatima Ali Salah (2022) Self-assessment as a self-regulated learning approach in English oral presentations: College students’ choices and perceptions. Cogent Education, 9 (1). pp. 1-15. ISSN 2331-186X. (Published)

Bernama, . (2022) Read about communism but dont take up arms, says ex cop. Free Malaysia Today .

Bernama, . (2022) Tiada ruang kegiatan Komunis muncul semula dalam negara. Bernama .

Bernama, . (2022) Tiada ruang komunis muncul semula dalam negara, kata bekas polis. Free Malaysia Today .

BinJubeir, Mohammed Ma. and Mohd Arfian, Ismail and Ali Ahmed, Abdulghani and Sadiq, Ali Safaa (2022) Slicing-based enhanced method for privacy-preserving in publishing big data. Computers, Materials & Continua, 72 (2). pp. 3665-3686. ISSN 1546-2226. (Published)

Budiea, Ahmed Mokhtar Albshir and Yee, Hau Chong and Shahrul Niza, Mokhatar and Khairunisa, Muthusamy and Mohamed Abdel Kader, IsmaiI (2022) Assessment of acid attack on concrete containing spent garnet as partial sand replacement. International Journal of Sustainable Building Technology and Urban Development, 13 (2). pp. 178-183. ISSN 2093-7628. (Published)

Bunyamin, Bunyamin and Febrina Dian, Kurniasari and Reza Pahlevi, Munirwan and Putra Jaya, Ramadhansyah (2022) Effect of coral aggregates of blended cement concrete subjected to different water immersion condition. Advances in Civil Engineering, 2022 (2919167). pp. 1-10. ISSN 1687-8094. (Published)

Bunyamin, Mubarokah and Abdul Wahab, Norwazli (2022) The impact of financial literacy on finance and economy: A literature review. Labuan Bulletin of International Business and Finance (LBIBF), 20 (2). pp. 49-65. ISSN 2600- 7894. (Published)

Bunyamin, Mubarokah and Abdul Wahab, Norwazli (2022) The influence of financial behaviour on financial risk tolerance in investment decision: A conceptual paper. International Journal of Industrial Management (IJIM), 14 (1). pp. 529-542. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

C

C. M., Low and A. N., Ilia Anisa and B. L., Chua and N. H., Abdurahman (2022) Investigation of the base oil properties in optimizing the demulsification. In: Journal of Physics: Conference Series, 16th International Engineering and Computing Research Conference (16th EURECA 2021) , 24 November 2021 , Virtual Conference, Taylor's University, Malaysia. pp. 1-14., 2222 (012015). ISSN 1742-6588 (Published)

C. M., Ng and Liew, Nicole Siaw Ing and Nur Ailah Taklima, Zukri and Putra Jaya, Ramadhansyah and Haryati, Awang (2022) The effect of mineral bottle as fine aggregate for manufacturing sustainable road construction. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 87.. (Published)

Cao, Xiawei and Ji, Yuanfa and Sun, Xiyan and Liang, Weibin and Kamarul Hawari, Ghazali (2022) EMS decoding algorithm that introduced shuffled strategy and improved variable node update. In: 2022 7th International Conference on Computer and Communication Systems, ICCCS 2022 , 22-25 April 2022 , Wuhan. pp. 398-402. (181990). ISBN 978-166545060-7 (Published)

Carlos, Enseriban (2022) IoT smart laboratory system using node-red and raspberry PI. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Chai, S. W. and Kamaluddin, M. R. and Ab Rashid, M. F. F. (2022) Optimisation of vehicle routing problem with time windows using Harris Hawks optimiser. Journal of Mechanical Engineering and Sciences (JMES), 16 (3). 9056 -9065. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Chandrathevan, Sathiamurthy (2022) Multi-Robot Learning with Bat Algorithm With Mutation (Bam). College of Engineering, Universiti Malaysia Pahang.

Chang, Ling Shing (2022) Solving ump examination timetabling problem using dynamic exploration step counting hill climbing algorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Nizam, Mohmad Kahar).

Charles, Kenny and Gui, Anderes and Fernando, Yudi and Ikhsan, Ridho Bramulya and Ernawaty, . and Gabby, Maria (2022) Analysis of factors affecting the intensity of mobile transportation applications usage in Pekanbaru. In: 7th International Conference on Information Management and Technology, ICIMTech 2022 , 11 - 12 August 2022 , Semarang, Indonesia. pp. 374-379. (22185084). ISBN 978-166545090-4 (Published)

Che Akmal, Che Yahaya and Ahmad, Firdaus and Ernawan, Ferda and Wan Isni Sofiah, Wan Din (2022) The relevance of bibliometric analysis to discover the area's research efforts: Root exploit evolution. International Journal on Informatics Visualization, 6 (2-2). pp. 489-497. ISSN 2549-9904. (Published)

Che Ku Eddy Nizwan, Che Ku Husin (2022) Establishment of spectral subtraction-based algorithm for experimental modal analysis under operating condition. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fairusham, Ghazali).

Che Mohd Nasril, Che Mohd Nassir and Mohd Khairul Izamil, Zolkefley and Muhammad Danial, Che Ramli and Haziq Hazman, Norman and Hafizah, Abdul Hamid and Muzaimi, Mustapha (2022) Neuroinflammation and COVID-19 ischemic stroke recovery—Evolving evidence for the mediating roles of the ACE2/Angiotensin-(1–7)/Mas Receptor Axis and NLRP3 Inflammasome. International Journal of Molecular Sciences, 23 (3085). pp. 1-23. ISSN 1661-6596. (Published)

Che Mohd Nasril, Che Mohd Nassir and Mohd Khairul Izamil, Zolkefley and Muhammad Danial, Ramli and Haziq Hazman, Norman and Hafizah, Abdul Hamid and Muzaimi, Mustapha (2022) Neuroinflammation and COVID-19 ischemic stroke recovery—Evolving evidence for the mediating roles of the ACE2/angiotensin-(1–7)/mas receptor axis and NLRP3 inflammasome. International Journal of Molecular Sciences, 23 (6). pp. 1-23. ISSN 1661-6596. (Published)

Che Muhamad Asad Safwan, Che Aziz and Norhafidzah, Mohd Saad and Mohammad Fadhil, Abas and Suliana, Ab Ghani and Ali, Abid (2022) Optimization of distributed generation using mix-integer optimization by genetic algorithm (MIOGA) Considering Load Growth. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 245-255., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4 (Published)

Cheah, J. and Leong, S. Y. and Fernando, Yudi (2022) Innovation strategies and organisational performance: The moderating role of company size among small- and medium-sized companies. Benchmarking: An International Journal, 1 (1). pp. 1-15. ISSN 1463-5771. (Published)

Cheang, Chi Qing (2022) Development of ammonia gas leakage detection, precaution and purging system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Cheng, Jack Kie and Muhamad Tamyez, Puteri Fadzline and Mohamad, Fazeeda and Zetty Ain, Kamaruzzaman and Zulkipli, Faridah and Mohd Zainudin, Maizura (2022) Utilising causal loop diagram to explore public integrity for effective COVID-19 preventive measures in Malaysia. Journal of Governance and Integrity (JGI), 5 (3). pp. 360-369. ISSN 2600-7479. (Published)

Cheok, J. W. and Kee, T. K. and Chew, L. C. and Saffuan, Wan Ahmad and A., Adnan (2022) Structure vulnerability and risk analysis of 4-legged offshore structure. Construction, 2 (1). pp. 126-135. ISSN 2785-8731. (Published)

Chilakamarry, Chaitanya Reddy (2022) Optimization of solid state fermentation parameters for bioethanol production from waste glycerol using immobilized escherichia coli. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Chilakamarry, Chaitanya Reddy and Dr. Mimi Sakinah, Abdul Munaim and Zularisam, Abdul Wahid and Ahamad Khilji, Irshad (2022) Growth profile study of Escherichia Coli K12 by optical density measurement. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 85.. (Published)

Chilakamarry, Chaitanya Reddy and Mimi Sakinah, A. M. and Zularisam, A. W. (2022) Opportunities of biodiesel industry waste conversion into value-added products. In: Materials Today: Proceedings, International Symposium of Reaction Engineering, Catalysis & Sustainable Energy (RECaSE 2021) , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1014-1020., 57 (3). ISSN 2214-7853 (Published)

Chilakamarry, Chaitanya reddy and Mimi Sakinah, A. M. and Zularisam, A. W. and Irshad Ahamad, Khilji and Noormazlinah, Ahmad (2022) Advances in solid-state fermentation for bioconversion of agricultural wastes to value-added products: Opportunities and challenges. Bioresource Technology, 343 (126065). pp. 1-11. ISSN 0960-8524. (Published)

Chilakamarry, Chaitanya reddy and Mimi Sakinah, A. M. and Zularisam, A. W. and Khilji, Irshad Ahamad and Kumarasamy, Sudhakar (2022) Glycerol Waste to Bio-Ethanol: Optimization of Fermentation Parameters by the Taguchi Method. Journal of Chemistry, 2022. pp. 1-11. ISSN 2090-9071. (Published)

Chin, Hau Lim and Mahendra Kumar, Jothi Letchumy and Rashid, Mamunur and Musa, Rabiu Muazu and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2022) The Classification of Hallucination: The Identification of Significant Time-Domain EEG Signals. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 989-997., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Chin, Hong Jie (2022) Car Rental System With Rule Based Technique. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Chong, Jia Xin (2022) IoT integrated antenna rotator. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Chong, Y. K. and Liang, Y. Y. and Lau, W. J. and Fimbres Weihs, G. A. (2022) 3D CFD study of hydrodynamics and mass transfer phenomena for spiral wound membrane submerged-type feed spacer with different node geometries and sizes. International Journal of Heat and Mass Transfer, 191 (122819). pp. 1-10. ISSN 0017-9310. (Published)

Chong, Yie Kai and Liang, Yong Yeow and Lau, Woei Jye and Adolfo, Gustavo (2022) Modelling flow and mass transfer inside spacer-filled channels for reverse osmosis membrane modules. In: 60 Years of the Loeb-Sourirajan Membrane. Principles, New Materials, Modelling, Characterization, and Applications . Elsevier, India, pp. 413-432. ISBN 978-0-323-89977-2

Choon, Cheow Shek and Ismayuzri, Ishak (2022) Feasibility study of CO, CO2, NO2 and O2 sensors for hazardous gas detection system in vehicle cabin. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 537-547., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Choong, Chun Sern and Ahmad Fakhri, Ab. Nasir and P.P. Abdul Majeed, Anwar and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman (2022) Investigation of features for classification RFID reading between two RFID reader in various support vector machine kernel function. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang. pp. 127-139., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Christina Andin, Nur Qistina Abdullah and Jeannet, Stephen and Abdul Said, Ambotang and Yusri, Kamin and Rosmiza, M. and Rohana, Hamzah and Daniel, Ugih (2022) The Demand of Change in Teaching and Learning: What are the teachers' reactions? International Journal of Special Education (IJSE), 37 (3s.). pp. 522-535. ISSN 1917-7844. (Published)

Christine Tan, Nya-Ling and Muhammad Ashraf, Fauzi and Ojo, Adedapo Oluwaseyi (2022) Predictors of the dependence on smartphones: The neglect of studies among Muslim students. Global Knowledge, Memory and Communication. pp. 1-16. ISSN 2514-9342. (In Press / Online First) (In Press / Online First)

Chuan, Zun Liang and Fam, S. F. and Lee, Q. H. and Kok, J. S. and Azam, M. N. B. M. (2022) Modelling the impacts of climate change and air pollutants on the agricultural production yields in Malaysia using Random-Effects Error Components Regression model. Data Analytics and Applied Mathematics (DAAM), 3 (2). pp. 1-12. ISSN 2773-4854. (Published)

Chuan, Zun Liang and Wan Nur Syahidah, Wan Yusoff and Azlyna, Senawi and Mohd Akramin, Mohd Romlay and Fam, Soo-Fen and Shinyie, Wendy Ling and Ken, Tan Lit (2022) A comparative effectiveness of hierarchical and nonhierarchical regionalisation algorithms in regionalising the homogeneous rainfall regions. Pertanika Journal of Science and Technology, 30 (1). pp. 319-342. ISSN 0128-7680. (Published)

Chuan, Zun Liang and Wan Nur Syahidah, Wan Yusoff and Azlyna, Senawi and Mohd Akramin, Mohd Romlay and Fam, Soo-Fen and Wendy Ling, Shinyie and Tan Lit, Ken (2022) A comparative effectiveness of hierarchical and non-hierarchical regionalisation algorithms in regionalising the homogeneous rainfall regions. Pertanika Journal of Science & Technology (JST), 30 (1). pp. 319-342. ISSN 0128-7680. (Published)

Cionita, Tezara and Siregar, Januar Parlaungan and Wong, Ling Shing and Cheng, Wan Hee and Fitriyana, Deni Fajar and Jamiluddin, Jaafar and Ramli, Junid and Irawan, Agustinus Purna and Hadi, Agung Efriyo (2022) The influence of filler loading and alkaline treatment on the mechanical properties of palm kernel cake filler reinforced epoxy composites. Polymers, 14 (3063). pp. 1-17. ISSN 2073-4360. (Published)

Cuce, Erdem and Cuce, Pinar Mert and Carlucci, Salvatore and Sen, Harun and Sudhakar, Kumarasamy and Md., Hasanuzzaman and Daneshazarian, Reza (2022) Solar chimney power plants : A review of the concepts, designs and performances. Sustainability (Switzerland), 14 (3). pp. 1-66. ISSN 2071-1050. (Published)

Cuce, Pinar Mert and Cuce, Erdem and Sudhakar, Kumarasamy (2022) A systematic review of thermal insulation performance of hollow bricks as a function of hollow geometry. International Journal of Ambient Energy, 43 (1). pp. 4406-4415. ISSN 0143-0750. (Published)

Cucus, Ahmad and Aji, Luhur Bayu and Al Fahim, Mubarak Ali and Aminuddin, Afrig and Farida, Lilis Dwi (2022) Selection of prospective workers using profile matching algorithm on crowdsourcing platform. In: ICOIACT 2022 - 5th International Conference on Information and Communications Technology: A New Way to Make AI Useful for Everyone in the New Normal Era, Proceeding; 5th International Conference on Information and Communications Technology, ICOIACT 2022 , 24-25 August 2022 , Yogyakarta. pp. 122-126. (185076). ISBN 978-166545140-6 (Published)

Cucus, Ahmad and B.A, Luhur and Al-Fahim, Mubarak Ali and Yuli Endra, Robby and Aprlinda, Yuthsi (2022) Bibliometrical analysis of workers quality on crowdsourcing based on VOS viewer. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 32.. (Published)

Cynthia, Ignatius (2022) Universiti Malaysia Pahang and Aspen Technology to Build an Ecosystem of Knowledge Sharing. Business Today .

D

D. F., Fitriyana and F. W., Nugraha and M. B., Laroybafih and R., Ismail and A. P., Bayuseno and R. C., Muhamadin and M. B., Ramadan and A. R. A., Qudus and J. P., Siregar (2022) The effect of hydroxyapatite concentration on the mechanical properties and degradation rate of biocomposite for biomedical applications. In: IOP Conference Series: Earth and Environmental Science, The 10th Engineering International Conference , 23 September 2021 , Virtual Conference, Semarang, Indonesia. pp. 1-9., 969 (012045). ISSN 1755-1307 (Published)

D. J., Krishna Kishore and M. R., Mohamed and K., Sudhakar and K., Peddakapu (2022) An improved grey wolf optimization based MPPT algorithm for photovoltaic systems under diverse partial shading conditions. In: Journal of Physics: Conference Series, Third International Conference on Emerging Electrical Energy, Electronics and Computing Technologies 2021 , 16-17 December 2021 , Virtual Conference. pp. 1-14., 2312 (012063). ISSN 1742-6588 (Published)

D. M., Taofeeq and A. Q., Adeleke and Lee, Chia Kuang (2022) Individual factors influencing contractors’ risk attitudes among Malaysian construction industries: the moderating role of government policy. International Journal Of Construction Management, 22 (4). pp. 612-631. ISSN 1562-3599 (Print) 2331-2327 (Online). (Published)

Das, Likhan and Rubbi, Fazlay and Khairul, Habib and Aslfattahi, Navid and Rahman, Saidur and Yahya, Syed Mohd and Kadirgama, Kumaran (2022) Insight into the investigation of diamond nanoparticles suspended therminol 55 nanofluids on concentrated photovoltaic/thermal solar collector. Nanomaterials, 12 (2975). pp. 1-22. ISSN 2079-4991. (Published)

Das, Likhan and Rubbi, Fazlay and Khairul, Habib and Aslfattahi, Navid and Saidur, Rahman Md and Yahya, Syed Mohd and Kadirgama, Kumaran (2022) Insight into the investigation of diamond nanoparticles suspended therminol®55 nanofluids on concentrated photovoltaic/thermal solar collector. Nanomaterials, 12 (2975). pp. 1-22. ISSN 2079-4991. (Published)

Daud, Nor Khonisah and M. Najib, N. H. I. (2022) CO₂ adsorption on zeolites and Fe-MOF for carbon capture and storage (CCS). Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 8 (1). pp. 27-32. ISSN 0126-8139. (Published)

Devarajan, Rajasegaran (2022) Digital filtering optimization on noisy human speech in assistive listening system. College of Engineering, Universiti Malaysia Pahang.

Dhaliwal, Jagjit Singh and Moshawih, Said and Goh, Khang Wen and Loy, Mei Jun and Hossain, Md Sanower and Hermansyah, Andi and Vijay, Kotra and Kifli, Nurolaini and Goh, Hui Poh and Sodhi Dhaliwal, Sachinjeet Kaur and Pg Hj Md Yassin, Hayati and Ming, Long Chiau (2022) Pharmacotherapeutics applications and chemistry of chalcone derivatives. Molecules, 27 (7062). pp. 1-24. ISSN 1420-3049. (Published)

Dhevindran, Ravi (2022) Range finder measurement system using ultrasonic waves. College of Engineering, Universiti Malaysia Pahang.

Dhilen, Manimaran (2022) Robotic hand controlled based on flexible sensor by glove using wireless communication. College of Engineering, Universiti Malaysia Pahang.

Diana Surya, Abd Wahab (2022) Pelajar perlu celik demokrasi berparlimen, raja berpelembagaan. Utusan Malaysia .

Din, Fakhrud and Kamal Zuhairi, Zamli (2022) Hyper-heuristic strategy for input-output-based interaction testing. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 967-977., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Din, Fakhrud and Kamal Zuhairi, Zamli and Abdullah, Nasser (2022) Assessing the chaotic map population initializations for sine cosine algorithm using the case study of pairwise test suite generation. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 371-380., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4 (Published)

Din, Fakhrud and Khalid, Shah and Fayaz, Muhammad and Gwak, Jeonghwan and Kamal Z., Zamli and Mashwani, Wali Khan (2022) Fuzzy adaptive teaching learning-based optimization for solving unconstrained numerical optimization problems. Mathematical Problems in Engineering, 2022 (2221762). pp. 1-17. ISSN 1024-123X. (Published)

Ditte Olsen, Lützhøft and Tim, Sinioja and Berit Ø., Christoffersen and Jakobsen, Rasmus Riemer and Dawei, Geng and Hajar Fauzan, Ahmad and Ellen Marie, Straarup and Karen-Margrethe, Pedersen and Kot, Witold and Henrik Duelund, Pedersen and Susanna, Cirera and Tuulia, Hyötyläinen and Dennis Sandris, Nielsen and Axel Kornerup, Hansen (2022) Marked gut microbiota dysbiosis and increased imidazole propionate are associated with a NASH Göttingen Minipig model. BMC Microbiology, 22 (287). pp. 1-14. ISSN 14712180. (Published)

Doh, S. I. and Ho, Chia Min and Chin, S. C. and Jing, G. Q. and Li, Xiaofeng (2022) Mechanical and water absorption properties of cement mortar incorporating basic oxygen furnace slag as fine aggregate. In: 12th Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2021 , 16 - 18 November 2021 , Virtual Conference. pp. 241-242.. (Published)

Doh, S. I. and Li, J. (2022) Railway defect detection method: A review. Construction, 2 (2). pp. 22-30. ISSN 2785-8731. (Published)

Doh, Shu Ing and Chia, Min Ho and Li, Xiaofeng and Putra Jaya, Ramadhansyah and Mohd Mustafa Al Bakri, Abdullah and Siew, Choo Chin and Nur Liza, Rahim and Nabiałek, Marcin (2022) The Effect of Particle Size on the Mechanical Properties of Alkali Activated Steel Slag Mortar. Archives of Civil Engineering, 68 (2). pp. 51-61. ISSN 1230-2945. (Published)

Doh, Shu Ing and Putra Jaya, Ramadhansyah and Chia, Min Ho and Siew, Choo Chin and Nabiałek, Marcin and Mohd Mustafa Al Bakri, Abdullah and Garus, Sebastian and Śliwa, Agata (2022) The Impact of Microwave Treatment on the Chemical Properties of Sewerage Sludge. Archives of Civil Engineering, 68 (1). pp. 365-377. ISSN 1230-2945. (Published)

Drury, Brett and Drury, Samuel Morais and Rahman, Md. Arafatur and Ullah, Ihsan (2022) A social network of crime : A review of the use of social networks for crime and the detection of crime. Online Social Networks and Media, 30 (100211). pp. 1-17. ISSN 2468-6964. (Published)

Duraisamy, Youventharan and Kirushna Moorthi, Jeevithan and Rokiah, Othman and T., Stark and Mohd Arif, Sulaiman (2022) Effects of concrete debris and bottom ash usage on the improvement of ballast degradation. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 105.. (Published)

Duraisamy, Youventharan and Rokiah, Othman and S., Mohd Arif and Kirushna Moorthi, Jeevithan (2022) Influences of waste inclusion on impact and crushing force resistance of track ballast. Key Engineering Materials, 912. pp. 225-240. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Durrani Aimi, Abdul Malik (2022) Hybrid fuzzy analytical hierarchy process with fuzzy inference system on ranking stem approach towards blended learning in mathematics. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Yuhani, Yusof).

E

Ekarizan, Shae and Putra Jaya, Ramadhansyah and Juraidah, Ahmad and Ahmad Kamil, Arshad and Mohd Afiq, Zihan and Fiona, Shiong (2022) Prediction Model of the Coring Asphalt Pavement Performance through Response Surface Methodology. Advances in Materials Science and Engineering, 2022 (6723396). pp. 1-17. ISSN 1687-8442. (Published)

Ekarizan, Shaffie and Ahmad Kamil, Arshad and Juraidah, Ahmad and Wardati, Hashim and Putra Jaya, Ramadhansyah and Khairil Azman, Masri and Mohd Amin, Shafii and Haryati, Yacoob (2022) Prediction of HMA mixture performance from rheological and rutting evaluation of nanopolymer asphalt binder. In: Lecture Notes in Civil Engineering; 5th International Conference on Sustainable Civil Engineering Structures and Construction Materials, SCESCM 2020 , 8 - 9 December 2020 , Virtual, Online. 1371 -1384., 215. ISSN 2366-2557 ISBN 978-981167923-0 (Published)

Elmutasim, Imadeldin Elsayed and Izzeldin Ibrahim, Mohamed Abdelaziz and Bilal, Khalid Hamid (2022) Seawater for the novelty era of communications-opportunities and challenges. Journal of Theoretical and Applied Information Technology, 100 (24). 4818 -4823. ISSN 1992-8645 (print); 817-3195 (online). (Published)

Elmy Johana, Mohamad and Kian Sek, Tee and Choon, Chewchang and Omar Mohd Faizan, Marwah and Mimi Mohaffyza, Mohamad and Noor Nazihah, Mohd Noor and Ruzairi, Abdul Rahman and Jaysuman, Pusppanathan and Mohd Hafiz, Fazalul Rahiman and Yasmin, Abdul Wahab and Suzanna, Ridzuan Aw (2022) Smart farming IoT based management during post Covid-19. In: 2022 2nd International Conference on Emerging Smart Technologies and Applications, eSmarTA 2022 , 25-26 October 2022 , Ibb. pp. 1-7. (184190). ISBN 978-166546181-8 (Published)

Elnaem, Mohamed Hassan and Mubarak, Naeem and Mohammed Salim, K. T. and Barakat, Muna M. and Abdelaziz, Doaa H. and Mansour, Noha O. and Thabit, Abrar K. and Ramatillah, Diana Laila and Al-Jumaili, Ali Azeez and Syed, Nabeel Kashan and Adam, Mohammed Fathelrahman and Hossain, Md Sanower and Baraka, Mohamed A. and Jose, Jimmy and Elkalmi, Ramadan M. and Chandran, Sarath and Singh Dehele, Inderpal and Elrggal, Mahmoud E. and Fathelrahman, Ahmed Ibrahim (2022) Assessment of mental wellbeing of undergraduate pharmacy students from 14 countries : The role of gender, lifestyle, health-related, and academic-related factors. Frontiers in Public Health, 10 (1011376). pp. 1-12. ISSN 2296-2565. (Published)

Elneel, Duha Awad and Abdul Sahli, Fakharudin and Ahmed, Elsadig Musa and Abdullateef, Mansoor (2022) Stakeholder identification overview and challenges in requirements engineering prospective. In: 2nd International Conference on Computing and Information Technology, ICCIT 2022 , 5-27 January 2022 , University of Tabuk, Saudi Arabia. 314 -319.. ISBN 978-166543605-2 (Published)

Eltwati, Ahmed Salama and Al-Saffar, Zaid Hazim and Azman, Mohamed and Mohd Rosli, Hainin and Elnihum, Ahmed and Enieb, Mahmoud (2022) Synergistic effect of SBS copolymers and aromatic oil on the characteristics of asphalt binders and mixtures containing reclaimed asphalt pavement. Construction and Building Materials, 327 (127026). pp. 1-14. ISSN 0950-0618. (Published)

Eltwati, Ahmed Salama and Azman, Mohamed and Mohd Rosli, Hainin and Jusli, Euniza and Enieb, Mahmoud (2022) Rejuvenation of aged asphalt binders by waste engine oil and SBS blend : Physical, chemical, and rheological properties of binders and mechanical evaluations of mixtures. Construction and Building Materials, 346 (128441). pp. 1-18. ISSN 0950-0618. (Published)

Elya Shaffiqa, Anuar (2022) Bioelectricity Generation From A Mixture Of Palm Oil Mill Effluent And Wet Palm Oil Sludge In Microbial Fuel Cell By Using Copper As An Electrode. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Emilawati, Othman and Nik Nor Fatihah, Nik Mood and Radhiyah, Abd Aziz (2022) Investigation the effect of different fraction EG : H the stability of tio2 nanofluid. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 118.. (Published)

Emma Melati, Burhanuddin (2022) WSCC Series 2022 kumpul pakar bidang kejuruteraan angin dan gempa bumi. UMP News .

Engku Nadia, Engku Mat Nasir (2022) Crystal size distribution characterisation of Carbamazepine-saccharin co-crystal in batch cooling crystallisation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah, Abd Rahim).

Erdiwansyah, . and Asri, Gani and Nurdin, M. H. and Rizalman, Mamat and R. E., Sarjono (2022) Policies and laws in the application of renewable energy Indonesia: A reviews. AIMS Energy, 10 (1). pp. 23-44. ISSN 2333-8326. (Published)

Erdiwansyah, . and Mahidin, . and M. S. M., Sani and Rizalman, Mamat and Asri, Gani and Munawir, . and Susmanto, . (2022) Effect of vibration and noise on spark ignition engines of methanol fuel blended with gasoline. Journal of Scientific & Industrial Research, 81 (1). pp. 32-38. ISSN 0975-1084 (Online). (Published)

Erdiwansyah, . and Mahidin, . and M. S. M., Sani and Rizalman, Mamat and Asri, Gani and Munawir, . and Susmanto, . (2022) Effect of vibration and noise on spark ignition engines of methanol fuel blended with gasoline. Journal of Scientific & Industrial Research, 81. 32 -38. ISSN 0022-4456. (Published)

Erdiwansyah, E. and Gani, Asri and Rizalman, Mamat and Mahidin, M. and Sudhakar, Kumarasamy and S. M., Rosdi and Husin, Husni (2022) Biomass and wind energy as sources of renewable energy for a more sustainable environment in Indonesia: a review. Archives of Environmental Protection, 48 (3). pp. 57-69. ISSN 2083-4772. (Published)

Erdiwansyah, Erdiwansyah and Mahidin, Mahidin and Husin, Husni and Faisal, Muhammad and Usman, Usman and Muhtadin, Muhtadin and Gani, Asri and Rizalman, Mamat (2022) Modification of perforated plate in fluidized-bed combustor to provide sufficient air supply in the combustion. Frontiers in Heat and Mass Transfer (FHMT), 18 (25). pp. 1-6. ISSN 2151-8629. (Published)

Ernawan, Ferda and Adi, Prajanto Wahyu and Liew, Siau-Chuin and Sarwoko, Eko Adi and Winarno, Edy (2022) Fast image watermarking based on signum of cosine matrix. Indonesian Journal of Electrical Engineering and Computer Science, 25 (3). pp. 1383-1391. ISSN 2502-4752. (Published)

Ernawan, Ferda and Afrig, Aminuddin and Eh Phon, Danakorn Nincarean and Alsheikh, Emad Addin and Wibowo, Adi (2022) Self-Recovery in Fragile Image Watermarking Using Integer Wavelet Transform. In: 2022 IEEE 8th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) , Melaka, Malaysia. pp. 21-25. (183892). ISSN 978-166548800-6 (Published)

Ernawan, Ferda and Aminuddin, Afrig and Eh Phon, Danakorn Nincarean and Mohd Faizal, Ab Razak and Ahmad Firdaus, Zainal Abidin (2022) Three layer authentications with a spiral block mapping to prove authenticity in medical images. International Journal of Advanced Computer Science and Applications (IJACSA), 13 (4). pp. 211-223. ISSN 2158-107X; 2156-5570(Online). (Published)

Ernawati, Muji and Ernawan, Ferda and Abbker, Yagoub and Fakhreldin, Mohammad Adam Ibrahim and Adi, Prajanto Wahyu (2022) Image splicing forgery approachs: A review and future direction. In: Proceedings - International Conference on Informatics and Computational Sciences; 6th International Conference on Informatics and Computational Sciences, ICICoS 2022 , 28-29 September 2022 , Virtual, Online. pp. 134-139., 2022 (183902). ISSN 2767-7087 ISBN 978-166546099-6 (Published)

Erny Haslina, Abd Latib and Nurlaila, Ismail and Saiful Nizam, Tajuddin and Jasmin, Jamil and Zakiah, Mohd Yusoff (2022) k-nearest neighbor modelling of agarwood oil samples available in capital of Malaysia market. International Journal of Electrical and Computer Engineering, 12 (3). pp. 3158-3165. ISSN 2088-8708. (Published)

Esmaeili Shayan, Mostafa and Najafi, Gholamhassan and Ghobadian, Barat and Gorjian, Shiva and Rizalman, Mamat and Mohd Fairusham, Ghazali (2022) Multi-microgrid optimization and energy management under boost voltage converter with Markov prediction chain and dynamic decision algorithm. Renewable Energy, 201. pp. 179-189. ISSN 0960-1481. (Published)

Essa, Abu Yamin (2022) Program SULUNG diperluas ke 20 universiti awam tahun depan. Berita Harian .

Essa, Wafa K. and Yasin, Suhad A. and Abdullah, Anwar H. and Thalji, Mohammad R. and Saeed, Ibtisam A. and Assiri, Mohammed A. and Chong, Kwok Feng and Ali, Gomaa A. M. (2022) Taguchi L25 (54) approach for methylene blue removal by polyethylene terephthalate nanofiber‐multi‐walled carbon nanotube composite. Water, 14 (8). pp. 1-16. ISSN 2073-4441. (Published)

Eswaramoorthi, Vijayamurugan and Kuan, Garry and Mohamad Razali, Abdullah and Anwar, P. P. Abdul Majeed and Suppiah, Pathmanathan K. and Musa, Rabiu Muazu (2022) Design and validation of a virtual physical education and sport science–related course: A learner’s engagement approach. International Journal of Environmental Research and Public Health, 19 (13). pp. 1-16. ISSN 1661-7827. (Published)

Eswaramoorthi, Vijayamurugan and Muhammad Zulhusni, Suhaimi and Mohamad Razali, Abdullah and Zulkefli, Sanip and Anwar, P. P. Abdul Majeed and Muhammad Zuhaili, Suhaimi and Clark, Cain C. T. and Musa, Rabiu Muazu (2022) Association of physical activity with anthropometrics variables and health-related risks in healthy male smokers. International Journal of Environmental Research and Public Health, 19 (12). pp. 1-15. ISSN 1661-7827. (Published)

Ezzah Naziha, Roslim (2022) Covariance Inflation Method In Ros Based Mobile Robot Navigation. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

F

Fadhel, Mahmoud Muhanad and Razali, Muda and Hamzah, Abdulwahhab Essa and Norazida, Ali and Mohd Saiful, Dzulkefly Zan and Norhana, Arsad (2022) Microsecond pulse generation in an actively q-switched all-pm fiber laser based on an electro-optic modulator. In: 2022 IEEE 9th International Conference on Photonics, ICP 2022 , 8-10 August 2022 , Kuala Lumpur. pp. 31-32. (183601). ISBN 978-166542766-1 (Published)

Fadzidah, Mohd Idris and Khamirul, Amin Matori and Ismayadi, Ismail and Idza Riati, Ibrahim and Rodziah, Nazlan and Farah Nabilah, Shafiee and Mohd Shamsul Ezzad, Shafie (2022) Materials’ characterization and properties of multiwalled carbon nanotubes from industrial waste as electromagnetic wave absorber. Journal of Nanoparticle Research, 24 (244). pp. 1-15. ISSN 1388-0764 (print), 1572-896X (online). (Published)

Faeeza, Abdul Halim and Firdaus, Basrawi and Ahmad Syazwan, Ramli and Oumer, A. N. and Nurul Aini, Mohd Azman (2022) Effect of surface roughness and temperature on the performance of low-temperature vacuum drying with induced nucleation boiling method in dewatering stingless bees honey. Drying Technology. pp. 1-13. ISSN 0737-3937. (In Press / Online First) (In Press / Online First)

Faezah, Isa and Haslinda, Zabiri and Noorlisa, Harun and Azmi, Mohammad Shariff (2022) CO2 Removal via an environmental green solvent, K2CO3-Glycine (PCGLY ) : Investigative analysis of a dynamic and control study. ACS Omega, 7 (22). pp. 18213-18228. ISSN 2470-1343. (Published)

Faiqah Masturina, Abd Aziz (2022) Drivers and barriers of project management practices in logistic industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Lee, Chin Kuang).

Faiz Hafeez, Azhar and Norsuhailizah, Sazali and Zawati, Harun and Mohan Raj, Paramasivam and Rosniza, Hussin and Zakiah, Kamdi and Norazlianie, Sazali and Riduan, Jamalludin and Siti Khadijah, . (2022) Simple Approach in Measuring the Synthesized Zeolite from Kaolin as Nutrient Retention for Mung Bean Growth. Emerging Advances in Integrated Technology, 3 (2). pp. 52-59. ISSN 2773-5540. (Published)

Fakhira Faaiqah, Hasan and Nur Aisha Wahida, Mohd Zahidi and Vivi Safitri, Bahar and Umi Rabiatul Ramzilah, P. Remli and Azrina, Abd Aziz (2022) Carbon quantum dots (CQDs) based composites photocatalyst for wastewater purification. In: Materials Science Forum; 3rd Postgraduate Symposium on Industrial Science and Technology, SISTEC 2021 , 25 - 26 August 2021 , Virtual, Online. pp. 111-117., 1056. ISSN 0255-5476 ISBN 978-303571649-8 (Published)

Fally Fiona, Basila and Puteri Fadzline, Muhamad Tamyez and Abdul Rahman, Zahari and Yao, Liu and Ahmad Afif, Ahmarofi (2022) Packaging waste generation by households: A mixed method study. International Journal of Environmental Studies. pp. 1-15. ISSN 1029-0400. (Published)

Faradila, Naim and Mahfuzah, Mustafa and Norizam, Sulaiman and Noor Aisyah, Ab Rahman (2022) The study of time domain features of EMG signals for detecting driver’s drowsiness. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang. pp. 427-438., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Faradila, Naim and Mahfuzah, Mustafa and Norizam, Sulaiman and Zarith Liyana, Zahari (2022) Dual-layer ranking feature selection method based on statistical formula for driver fatigue detection of EMG signals. Traitement du Signal, 39 (3). pp. 1079-1088. ISSN 0765-0019. (Published)

Farah, Amalina and Abdul Syukor, Abd Razak and Krishnan, Santhana and A. W., Zularisam and Mohd, Nasrullah (2022) A comprehensive assessment of the method for producing biochar, its characterization, stability, and potential applications in regenerative economic sustainability – A review. Cleaner Materials, 3 (100045). pp. 1-18. ISSN 2772-3976. (Published)

Farah, Amalina and Abdul Syukor, Abd Razak and Santhana, Krishnan and A. W., Zularisam and Mohd, Nasrullah (2022) Water hyacinth (Eichhornia crassipes) for organic contaminants removal in water – A review. Journal of Hazardous Materials Advances, 7 (100092). pp. 1-10. ISSN 2772-4166. (Published)

Farah, Amalina and Abdul Syukor, Abd Razak and Santhana, Krishnan and A. W., Zularisam and Mohd, Nasrullah (2022) A review of eco-sustainable techniques for the removal of Rhodamine B dye utilizing biomass residue adsorbents. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103267). ISSN 1474-7065. (Published)

Farah, Amalina and Abdul Syukor, Abd Razak and Santhana, Krishnan and Haspina, Sulaiman and A. W., Zularisam and Mohd, Nasrullah (2022) Advanced techniques in the production of biochar from lignocellulosic biomass and environmental applications. Cleaner Materials, 6 (100137). ISSN 2772-3976. (Published)

Farah, Amalina and Abdul Syukor, Abd Razak and Santhana, Krishnan and Haspina, Sulaiman and A. W., Zularisam and Mohd, Nasrullah (2022) Biochar production techniques utilizing biomass waste-derived materials and environmental applications – A review. Journal of Hazardous Materials Advances, 7 (100134). ISSN 2772-4166. (Published)

Farah Aina, Mohamad Jamal and Ruzairi, Abdul Rahim and Nasarudin, Ahmad and Juliza, Jamaludin and Fazlul Rahman, Mohd Yunus and Yasmin, Abdul Wahab and Nur Arina Hazwani, Samsun Zaini and Rajan, Navintiran and Ahmad Ridhwan, Wahap (2022) A study on the arrival time of ultrasonic waves in concrete material. In: Lecture Notes in Electrical Engineering; 3rd International Conference on Control, Instrumentation and Mechatronics Engineering, CIM 2022 , 2-3 March 2022 , Virtual, Online. pp. 83-92., 921 LNEE (280399). ISSN 1876-1100 ISBN 978-981193922-8 (Published)

Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Krishnan, Santhana and Sulaiman, Haspina and Zularisam, Abdul Wahid and Mohd Nasrullah, Zulkifli (2022) Advanced techniques in the production of biochar from lignocellulosic biomass and environmental applications. Cleaner Materials, 6 (100137). pp. 1-17. ISSN 2772-3976. (Published)

Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Krishnan, Santhana and Zularisam, Abdul Wahid and Mohd, Nasrullah (2022) Dyes removal from textile wastewater by agricultural waste as an absorbent – A review. Cleaner Waste Systems, 3 (100051). pp. 1-15. ISSN 2772-9125. (Published)

Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Krishnan, Santhana and Zularisam, Abdul Wahid and Mohd, Nasrullah (2022) The effects of chemical modification on adsorbent performance on water and wastewater treatment - A review. Bioresource Technology Reports, 20 (101259). pp. 1-12. ISSN 2589-014X. (Published)

Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Krishnan, Santhana and Zularisam, Abdul Wahid and Nasrullah, Mohd (2022) The synthetization of activated carbon from electrocoagulated palm oil mill effluent sludge for wastewater treatment. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 98.. (Published)

Farah Nadiah, Sidek and Suriyati, Saleh and Noor Asma Fazli, Abdul Samad (2022) Kinetic parameter estimation for drying stage during gasification of empty fruit bunch. In: Materials Today: Proceedings, 3rd Symposium on Industrial Science and Technology (SISTEC2021) , 25-26 August 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1338-1343., 51 (Part 2). ISSN 2214-7853 (Published)

Farah Nur Arina, Baharudin and Nor Azlina, Ab. Aziz and Mohamad Razwan, Abdul Malek and Anith Khairunnisa, Ghazali and Zuwairie, Ibrahim (2022) Indoor comfort and energy consumption optimization using an inertia weight artificial bee colony algorithm. Algorithms, 15 (395). pp. 1-21. ISSN 1999-4893. (Published)

Farah Nurshahida, Mohd Subakir and Nazikussabah, Zaharudin and Nurul Aini, Mohd Azman and N., Samat (2022) Thiobarbituric Reactive Substance (TBARS) and sensory evaluation of breast chicken meat from broiler fed with Kappaphycus alvarezii and Sargassum polycystum seaweeds formulated feed. Food Research, 6. 107 -115. ISSN 2550-2166. (Published)

Farah Shazwani, Ali (2022) Jalan konkrit tahan sampai 30 tahun. Sinar Harian .

Farhah, M. and Fatanah, M. S. and Mohd Zulfakar, M. and Ummu Kulthum, Jamaludin and Normy, R. and Syatirah, M. Z. and Jihan, M. Z.N. (2022) Modeling of insulin sensitivity for Sepsis-AKI and Sepsis Non-AKI. In: 7th IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2022 - Proceedings. 7th IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2022 , 7 - 9 December 2022 , Virtual, Online. pp. 223-227.. ISBN 978-166549469-4 (Published)

Farhan Anis, Azhar and Mahfuzah, Mustafa and Norizam, Sulaiman and Mamunur, Rashid and Bari, Bifta Sama and Islam, Md Nahidul and Hasan, Md Jahid and Nur Fahriza, Mohd Ali (2022) The classification of Electrooculogram (EOG) through the application of Linear Discriminant Analysis (LDA) of selected time-domain signals. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang. pp. 583-591., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Farhan Anis, Azhar and Mahfuzah, Mustafa and Norizam, Sulaiman and Rashid, Mamunur and Bari, Bifta Sama and Islam, Md Nahidul and Hasan, Md Jahid and Nur Fahriza, Mohd Ali (2022) The Classification of Electrooculogram (EOG) through the application of Linear Discriminant Analysis (LDA) of selected time-domain signals. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 583-591., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Farhan Arshad, Mohamad Rai’zuddin and Ramli, Nor Azuana and Ab Rashid, Nuryasmin (2022) Analysis of Malaysia’s future talents using time series. Mathematics and Computational Sciences, 3 (1). pp. 1-12. ISSN 9772442284003. (Published)

Farhan Nabil, Mohd Noor and Wan Hasbullah, Mohd Isa and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Ahmad Fakhri, Ab Nasir and Abdul Majeed, Anwar P. P. (2022) The diagnosis of diabetic retinopathy : An evaluation of different classifiers with the inception V3 model as a feature extractor. In: Lecture Notes in Networks and Systems; 9th International Conference on Robot Intelligence Technology and Applications, RiTA 2021 , 16-17 December 2021 , Daejeon. pp. 392-397., 429 LNNS (276219). ISSN 2367-3370 ISBN 978-303097671-2 (Published)

Farhan Nabil, Mohd Noor and Wan Hasbullah, Mohd Isa and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Ahmad Fakhri, Ab. Nasir and P.P. Abdul Majeed, Anwar (2022) The diagnosis of diabetic retinopathy : An evaluation of different classifiers with the inception V3 model as a feature extractor. In: Lecture Notes in Networks and Systems. 9th International Conference on Robot Intelligence Technology and Applications, RiTA 2021 , 16 - 17 December 2021 , Daejeon. pp. 392-397., 429 LNNS. ISSN 2367-3370 ISBN 978-303097671-2 (Published)

Farhana, Kaniz and Sneha, Zakiya Zohura and Mondol, Subrota and Farin, Faijun and Mahamude, Abu Shadate Faisal (2022) Business trend analysis of RMG industry in context of Bangladesh-A case study. International Journal of Industrial Management (IJIM), 14 (1). pp. 515-528. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Farhana, Zaimustafa (2022) Production Of Biogas By Using Air Stripping As Pre-Treatment Process In Anaerobic Digestion Of Palm Oil Mill Effluent (POME). Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Fariza, Md Sham and Hafizan, Mat Som and Suhaidah, Hussain and Siti Jamiaah, Abd Jalil and Hasiah, Salleh and Razalina, Abdul Rashid and Siti Aisyah, Ismail (2022) Dasar Dan Pelan Tindakan Wanita Pahang 2022-2026. UCYP Press, Kuantan, Pahang. ISBN 978-967-2491-19-4

Farouk, Rahim and Wan Ahmad Fauzi, Wan Husain (2022) Orang Melayu, Orang Asal Dan Pendatang Yang Diterima, Semuanya Rakyat Raja Melayu. Demi Malaiu . p. 1.

Farra Herliena, Md Zin (2022) Investigation Of Traffic Sign Image Classification For Self Driving Car. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Farra Herliena, Md Zin and Fahmi, Samsuri (2022) Investigation of traffic sign image classification for self driving car. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 158.. (Published)

Farzad, Jaliliantabar and Abdul Adam, Abdullah and Carlucci, Paolo and Kumarasamy, Sudhakar (2022) Biofuel combustion generated particles analysis. In: Application of Clean Fuels in Combustion Engines. Energy, Environment, and Sustainability . Springer, Singapore, pp. 117-129. ISBN 978-981-16-8751-8

Fathie Ahmad, Zakil and Raffiza, Mohd Isa and Mohd Shafiq, Mohd Sueb and Ruzinah, Isha (2022) Growth performance and mineral analysis of Pleurotus ostreatus (oyster mushroom) cultivated on spent mushroom medium mixed with rubber tree sawdust (In press). Materials Today: Proceedings. pp. 1-9. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Fatimah, Ali and Nur Syafawati, Sabuan (2022) Lets fly high Intermediate English For Officers Iefo training. Pusat Bahasa Moden .

Fatimah, Daing Jamil (2022) Fitness function determination of uav anomaly detection in large data set via pso. College of Engineering, Universiti Malaysia Pahang.

Fatin Amira Sofiyya, Abd Halim and Afiqah, Radzi and Ahmad Rizal, Alias and Abdul Rahimi, Abdul Rahman (2022) Well-being in high-rise construction sites : Key factors. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 36-42., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)

Fatin Azira, Abd Rahim and Nurhuda Dini, Faridon and Mazni, Ismail and Ruwaida, Abdul Rasid and A., Kadri and Engliman, N. S. (2022) Microwave torrefaction of sawdust as biomass energy source. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 206.. (Published)

Fatin Farisha Alia, Azmi and Saifful Kamaluddin, Muzakir and Mohd Fakhrul Zamani, Kadir and Shujahadeen B., Aziz (2022) On the structural-optical correlation of ZnO nanospheres synthesized using thermal evaporation technique. Molecular Crystals and Liquid Crystals, 693 (1). pp. 66-75. ISSN 1542-1406 (print); 1563-5287 (online). (Published)

Fatin Nur Amalina, Zainol and Mohd Zamri, Ibrahim (2022) Image approach to english digits recognition using deep learning. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 6-11., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)

Fatin Nur Amalina, Zainol and Mohd Zamri, Ibrahim (2022) Implementation of artificial neural network to recognize numbers from voice. In: Lecture Notes in Electrical Engineering. 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan. pp. 895-904., 842. ISSN 1876-1100 ISBN 978-981168689-4 (Published)

Fatin Nur Amalina, Zainol and Mohd Zamri, Ibrahim (2022) Implementation of artificial neural network to recognize numbers from voice. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 895-904., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4 (Published)

Fatinah, Mohd Rahalim and Juliza, Jamaludin and Syarfa Najihah, Raisin and Wan Zakiah, Wan Ismail and Irneza, Ismail and Ruzairi, Abdul Rahim and Yasmin, Abdul Wahab (2022) An application of charge-coupled Device (CCD) tomography system for gemological industry - a review. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 31-41. (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Fauzi, M. A. (2022) A bibliometric review on knowledge management in tourism and hospitality: Past, present and future trends. International Journal of Contemporary Hospitality Management, Ahead-of-print (Ahead-of-print). pp. 1-24. ISSN 0959-6119. (In Press / Online First) (In Press / Online First)

Fauzi, M. A. and Muhamad Tamyez, Puteri Fadzline and Kumar, Senthil (2022) Social entrepreneurship and social innovation in ASEAN: Past, present, and future trends. Journal of Social Entrepreneurship. pp. 1-24. ISSN 1942-0684. (In Press / Online First) (In Press / Online First)

Fauzi, Muhammad Ashraf and Kamaruzzaman, Zetty Ain and Abdul Rahman, Hamirahanim (2022) Bibliometric review on human resources management and big data analytics. International Journal of Manpower, ahead-of-print (ahead-of-print). pp. 1-21. ISSN 0143-7720. (Published)

Faysal, Atik and Ngui, Wai Keng and M. H., Lim (2022) Performance Evaluation of BPSO & PCA as Feature Reduction Techniques for Bearing Fault Diagnosis. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 605-615., 730. (Published)

Fazilah, Abdul Aziz and Nur Aisyah Mardhiah, Halim (2022) Consequences of risk factors related to prolonged computer use on musculaokeletal pain in public unversity students: A case study. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 69-75. ISSN 2636-9575. (Published)

Fazilah, Abdul Aziz and Nur Aqila, Nor Azmi (2022) The impact of risk factors associated with long-term computer use on musculoskeletal discomfort among administrative staff: A case study. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 7-17. ISSN 2636-9575. (Published)

Fazilah, Idris and Wardah, Mustafa Din and Mohammad Rezal, Hamzah and Jamiah, Manap and Rajan, Munusamy and Anita, Abdul Rani and Nur Aini Aiman, Zulkifli Airwan (2022) Factors Contributing To University Students’ Integrity. International Journal of Academic Research in Business and Social Sciences (IJARBSS), 12 (12). pp. 266-280. ISSN 2222-6990. (Published)

Fazlul Rahman, Mohd Yunus and Suzanna, Ridzuan Aw and Ruzairi, Abdul Rahim and Leow, Pei Ling and Mohd Hafiz, Fazalul Rahiman and Yasmin, Abdul Wahab and Nor Muzakir, Nor Ayob and Shahrulnizahani, Mohammad Din and Puspanathan, Jaysuman (2022) Hardware Development of Dual-Modality Tomography Using Electrical Resistance and Ultrasonic Transmission Tomography for Imaging Liquid and Gas. In: Control, Instrumentation and Mechatronics: Theory and Practice. Lecture Notes in Electrical Engineering, 921 . Springer, Singapore, pp. 793-808. ISBN 978-981-19-3922-8 (Printed); 978-981-19-3923-5(Online)

Fazlul Rahman, Mohd Yunus and Suzanna, Ridzuan Aw and Ruzairi, Abdul Rahim and Leow, Pei Ling and Mohd Hafiz, Fazalul Rahiman and Yasmin, Abdul Wahab and Nor Muzakir, Nor Ayob and Shahrulnizahani, Mohammad Din and Puspanathan, Jaysuman (2022) Hardware Development of Dual-Modality Tomography Using Electrical Resistance and Ultrasonic Transmission Tomography for Imaging Liquid and Gas. In: Control, Instrumentation and Mechatronics: Theory and Practice. Lecture Notes in Electrical Engineering, 921 (1). Springer, Malaysia, pp. 793-808. ISBN 978-981-19-3922-8 (Printed); 978-981-19-3923-5(Online)

Feizollah, Ali and Nor Badrul, Anuar and Mehdi, Riyadh and Ahmad Firdaus, Zainal Abidin and Ainin, Sulaiman (2022) Understanding COVID-19 halal vaccination discourse on facebook and twitter using aspect-based sentiment analysis and text emotion analysis. International Journal of Environmental Research and Public Health, 19 (10). pp. 1-17. ISSN 1661-7827. (Published)

Ferda, Ernawan and Kartika, Handayani and Mohammad, Fakhreldin and Yagoub, Abbker (2022) Light Gradient Boosting with Hyper Parameter Tuning Optimization for COVID-19 Prediction. International Journal of Advanced Computer Science and Applications (IJACSA), 13 (8). pp. 514-523. ISSN 2156-5570(Online). (Published)

Ferdaus, R. and K. A., Masri and P. J., Ramadhansyah (2022) Sustainable use of polymer in asphalt mixture: A review. Construction, 2 (2). pp. 12-21. ISSN 2785-8731. (Published)

Ferdous, I. U. and Alang, Nasrul Azuan and Alias, J. (2022) Prediction of the creep behavior of P91 Steel at 873 K using continuum damage mechanics model. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 359-371. ISBN 978-981-19-2890-1

Ferdous, Talukdar Raian and Hasan, Rifath and Alam, Mohammad Khurshed and Islam, Muhammad Muinul and Rahman, Md Asadur (2022) A simple design of a Matlab-Based function for topographical presentation of FNIRS Data. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 511-519., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4 (Published)

Fernando, Yudi and Halili, Munira and Tseng, Ming-Lang and Tseng, Jiun Wei and Lim, Ming K. (2022) Sustainable social supply chain practices and firm social performance: Framework and empirical evidence. Journal of Sustainable Production and Consumption, 32. pp. 160-172. ISSN 2352-5509. (Published)

Fernando, Yudi and Jasmi, Muhamad Fairuz Ahmad and Wahyuni-TD, Ika Sari and Mergeresa, Fineke and Khamis, Kamarul Azman and Fakhrorazi, A and Omar, Rusdi (2022) Supply chain integration and halal frozen meat product returns. Journal of Islamic Marketing, ahead-of-print (ahead-of-print). pp. 1-27. ISSN 1759-0833. (In Press / Online First) (In Press / Online First)

Fernando, Yudi and Muhammad Shabir, Shaharudin and Ahmed Zainul, Abideen (2022) Circular economy-based reverse logistics: dynamic interplay between sustainable resource commitment and financial performance. European Journal of Management and Business Economics, 1 (1). pp. 1-22. ISSN 2444-8494. (Published)

Fernando, Yudi and Tseng, Min-Lang and Aziz, Nurarif and Ikhsan, Ridho Bramulya and Wahyuni-TD, Ika Sari (2022) Waste-to-energy supply chain management on circular economy capability: An empirical study. Sustainable Production and Consumption, 31. pp. 26-38. ISSN 2352-5509. (Published)

Fernando, Yudi and Tseng, Ming-Lang and Nur, Gulam Muhammad and Ikhsan, Ridho Bramulya and Lim, Ming K. (2022) Practising circular economy performance in Malaysia: Managing supply chain disruption and technological innovation capability under industry 4.0. International Journal of Logistics Research and Applications, 1 (1). pp. 1-25. ISSN 1367-5567. (Published)

Fernando, Yudi and Tseng, Ming-Lang and Wahyuni-TD, Ika Sari and Sroufe, Robert and Mohd-Zailani, Nik Ida Amiera (2022) Blockchain technology adoption for carbon trading and energy efficiency: ISO manufacturing firms in Malaysia. International Journal of Logistics Research and Applications. pp. 1-22. ISSN 1367-5567. (In Press / Online First) (In Press / Online First)

Fernando, Yudi and Wahyuni-TD, Ika Sari and Abideen, Ahmed Zainul and Mergeresa, Fineke (2022) Traceability technology, halal logistics brand and logistics performance: Religious beliefs and beyond. Journal of Islamic Marketing, 1 (1). pp. 1-25. ISSN 1759-0833. (Published)

Fernando, Yudi and Wahyuni-TD, Ika Sari and Gui, Anderes and Ikhsan, Ridho Bramulya and Mergeresa, Fineke and Yuvaraj, Ganesan (2022) A mixed-method study on the barriers of industry 4.0 adoption in the Indonesian SMEs manufacturing supply chains. Journal of Science and Technology Policy Management, ahead-of-pri. pp. 1-18. ISSN 2053-4620. (Published)

Fiezreen, . (2022) Cemerlang 8 kali Anugerah Dekan, William dinobatkan sebagai penerima Anugerah Pelajaran Diraja UMP. Remaja.my .

Fikrah, Admin (2022) UMP raih 14 pingat emas di ITEX 2022. Fikrah Pahang .

Firdaus, Ismail and Hwai Ern, Eng and Teoh, Chee Shan and Abdul Syukor, Abd Razak (2022) Phytoremediation and bioremediation of heavy metal from domestic wastewater by lepironia articulata, monochoria vaginalis and typha angustifolia. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 197.. (Published)

Fitriady, Muhammad Arifuddin and Nurizzatul Atikha, Rahmat and Ahmad Faiz, Mohammad (2022) Effect of mesh refinement on vertical and lateral velocity profiles of the wake flow behind a spire based on cfd. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 160.. (Published)

Fitriyana, Deni Fajar and Anis, Samsudin and Al Qudus, Abdul Rachman and Lakuy, Mirza Aufa Nugraha and Ismail, Rifky and Nugroho, Sri and Haryadi, Gunawan Dwi and Bayuseno, Athanasius Priharyoto and Siregar, Januar Parlaungan (2022) The effect of post-heat treatment on the mechanical properties of FeCrBMnSi coatings prepared by twin wire arc spraying (TWAS) method on pump impeller from 304 stainless steel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (2). pp. 138-147. ISSN 2289-7879. (Published)

Fitriyana, Deni Fajar and Doni Widodo, Rahmat and Kriswanto, Kriswanto and Athoillah, Ahmad and Prasetyo, Ares Yudi and Alrasyid, Mochamad Dzaki and Aripin, Muhammad Bustanul and Dimyati, Saeful and Irawan, Agustinus Purna and Cionita, Tezara and Siregar, Januar Parlaungan and Ismail, Rifky and Bayuseno, Athanasius Priharyoto (2022) Addition Rice Husk on the Density and Impact Strength of Non-Asbestos Brake Pad Composites Prepared by The Hand Layup Method. Jurnal Penerapan Teknologi dan Pembelajaran, 20 (1). pp. 20-28. ISSN 2527-6964. (Published)

Foong, Kin Hong (2022) Music Recommender System Using Machine Learning Content-Based Filtering Technique. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Francis, Angel and Ramyashree, M. S. and Shanmuga Priya, S. and Kumar, Surendra Harish and Sudhakar, Kumarasamy and Fan, Wei Keen and Tahir, Muhammad (2022) Carbon dioxide hydrogenation to methanol : Process simulation and optimization studies. International Journal of Hydrogen Energy, 47 (86). pp. 36418-36432. ISSN 0360-3199. (Published)

Fukuoka, Yasuhiro and Komatsu, Ryunosuke and Machii, Kenta and Yokota, Masaaki and Tobe, Masaki and Ahmad Najmuddin, Ibrahim and Fukui, Takahiro and Habu, Yasushi (2022) Pace running of a quadruped robot driven by pneumatic muscle actuators : An experimental study. Applied Sciences (Switzerland), 12 (9). pp. 1-17. ISSN 2076-3417. (Published)

Fukuoka, Yasuhiro and Oshino, Kazuyuki and Ahmad Najmuddin, Ibrahim (2022) Negotiating uneven terrain by a simple teleoperated tracked vehicle with internally movable center of gravity. Applied Sciences (Switzerland), 12 (1). pp. 1-16. ISSN 2076-3417. (Published)

G

G., Kadirgama and A., Kumar and M., Sandhya and L., Samylingam and D., Ramasamy and K., Kadirgama and H. A., Mohammed and M., Samykano and R., Saidur (2022) Graphene nanoplatelets–cellulose nanocrystals in engine oil for automotive applications. Green Materials, Ahead of Print. pp. 1-9. ISSN 2049-1239. (Published)

G. M., Salim and M. A., Zawawi (2022) Optical Sensor Assembly on knee Brace for continuous knee monitoring application. Journal of Medical and Biological Engineering. pp. 1-9. ISSN 1609-0985 (print); 2199-4757 (online). (Published)

G. M., Salim and M. A., Zawawi (2022) Optical goniometer for continuous knee monitoring application based on linear array photodiode. Optik, 264. pp. 1-12. ISSN 0030-4026. (Published)

Games, Donard and Hidayat, Tedi and Fhardilha, Jingga and Fernando, Yudi and Sari, Dessy Kurnia (2022) The impact of trust, knowledge sharing, and affective commitment on SME innovation performance. Journal of Governance & Integrity, 5 (2). pp. 267-274. ISSN 2600-7479. (Published)

Gan, Kar Hou (2022) Mobile Savings Application With Gamification (Msag). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Gani, Anisha Banu Dawood and Fernando, Yudi (2022) Digital empathy and supply chain cybersecurity challenges: concept, framework and solutions for small-medium enterprises. International Journal of Management Concepts and Philosophy. pp. 1-10. ISSN 1741-8135. (In Press / Online First) (In Press / Online First)

Gani, Anisha Banu Dawood and Fernando, Yudi and Lan, Shulin and Lim, Ming K. and Tseng, Ming-Lang (2022) Interplay between cyber supply chain risk management practices and cyber security performance. Industrial Management and Data Systems, Ahead-of-print (Ahead-of-print). pp. 1-19. ISSN 0263-5577. (In Press / Online First) (In Press / Online First)

Gani, Asri and Erdiwansyah, Erdiwansyah and Sardjono, Ratnaningsih Eko and Mariana, Mariana and Rizalman, Mamat (2022) Comparison of remaining coal-burning ash-based on cd, pb, and hg concentration at different temperatures : A case study in aceh province. Journal of Environmental Engineering and Landscape Management, 30 (3). pp. 342-349. ISSN 1648-6897. (Published)

Gardezi, Syed Shujaa Safdar and Nasir, Shafiq and Muhammad Waris, Ali Khan (2022) Relational pre-impact assessment of conventional housing features and carbon footprint for achieving sustainable built environment. Environment, Development and Sustainability, 24 (6). pp. 8441-8463. ISSN 1387-585X. (Published)

Ghassan, Maan Salim (2022) Optical goniometer device for continuous monitoring of the knee movement in physiotherapy application. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Anwar, Zawawi).

Ghazali, Alias (2022) UMP cipta produk nutrisi tanaman. Kosmo .

Ghazali, M. S. M. and Romlay, F. R. M. and Ehsan, A. A. (2022) Development of polymer-based Y-branch symmetric waveguide coupler using soft lithography technique. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. 71 -76., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Goh, H.C. and Putra Jaya, Ramadhansyah (2022) The influence of eggshell powder as additive on the physical and mechanical properties of stone mastic asphalt. Construction, 2 (1). pp. 79-87. ISSN 2785-8731. (Published)

Goh, Pei Sean and Noor Azlinda, Ahmad and Lim, Junwei and Liang, Yong Yeow and Kang, Hooi Siang and Ahmad Fauzi, Ismail and Arthanareeswaran, Gangasalam (2022) Microalgae-enabled wastewater remediation and nutrient recovery through membrane photobioreactors : Recent achievements and future perspective. Membranes, 12 (11). pp. 1-25. ISSN 2077-0375. (Published)

Gupta, Shreya and Sharma, Swati and Kumar Nadda, Ashok and Saad Bala Husain, Mohamed and Gupta, Arun Kumar (2022) Biopolymers from waste biomass and its applications in the cosmetic industry : A review. In: Materials Today: Proceedings. The Indo-US International Conferences on Materials & Sustainable Engineering in Chemical and Allied Industry , 2022 . pp. 873-879., 68. ISSN 2214-7853 (Published)

H

H., Ab. Rahim and H., Ahmad and N., Wahab and M. H., Ab. Rahim (2022) Development of Kaya Slice (coconut jam slice): evaluation of physicochemical, sensory evaluation and macronutrients composition when cooperated with gelatin. Food Research, 6 (2). pp. 241-247. ISSN 2550-2166. (Published)

H., Norazlina and A., Suhaila and M., Rabiatul Manisah and A., Nabihah and H., Lili Shakirah and M. S., Nurul Aniyyah and Y., Kamal (2022) Application of response surface methodology (RSM) in analyzing the hydrolytic degradation of plasticized MWCNTs nanocomposites. In: Journal of Physics: Conference Series, International Conference on Chemical Innovation (ICCI 2021) , 25-26 October 2021 , Virtual Conference, University College TATI (UC TATI). pp. 1-9., 2266 (012001). ISSN 1742-6588 (Published)

Habberrih, Salah Omar Abdulali and Islam, Mir Sujaul and Zaied, Khalid and Che Ku Mohammad, Faizal and Fadzil, Mat Yahaya (2022) Anti-fungal efficacy of aqueous leaf extracts Neem (Azadirachta indica) in the treatment of tap water. Ecology, Environment and Conservation, 28 (Suppl. Issue). pp. 446-460. ISSN 0971-765X. (Published)

Hadi, Agung Efriyo and Siregar, Januar Parlaungan and Cionita, Tezara and Norlaila, Mohd Bakeri and Muhammad Amin, Mohd Badari and Irawan, Agustinus Purna and Jamiluddin, Jaafar and Rihayat, Teuku and Ramli, Junid and Fitriyana, Deni Fajar (2022) Potentiality of utilizing woven pineapple leaf fibre for polymer composites. Polymers, 14 (13). pp. 1-11. ISSN 2073-4360. (Published)

Hadijah, Ahmad (2022) 3 ciri kepemimpinan diri jayakan langkah kurangkan jam bekerja. Berita Harian .

Hadijah, Ahmad (2022) Memperkasakan Pendidikan TVET Mencerna Pemahaman Masyarakat. UMP News .

Hadijah, Ahmad (2022) Pemantapan Kursus Integriti dan Anti Rasuah melalui pembelajaran berasaskan pengalaman: dengan kaedah pembelajaran Sesi Moot Court. UMP News .

Hadijah, Ahmad (2022) Pengukuhan pengalaman 18 pelajar dalam Kursus Integriti dan Anti Rasuah (KIAR) melalui lawatan ke SPRM Pahang. UMP News .

Hadijah, Ahmad and Fatmawati, Latada and Siti Fatihah, Ghazali and Ahmad Muhaimin, Mohamad and Mohd Rahimi, Ramli (2022) Soft Skills Nurturing Altruistic Leaders. 2nd series . Centre for Human Sciences, UMP, Kuantan, Pahang. ISBN 978-967-2831-50-1 (eISBN)

Hafiz Hakimie, Mat Tahir (2022) Investigation Of Standard Test Condition Requirement In Establishing Reliable Current-Voltage Characterization System For Dye –Sensitized Solar Cell (Dssc) As An Alternative For Commercial Solar Simulator And Photovoltaic Measurement System. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Hafizatulazlin, Abdul Aziz (2022) Profesor Madya Dr. Hazrulrizawati hasilkan produk rawatan tulang melalui tanduk rusa. UMP News .

Hafizatulazlin, Abdul Aziz and Nur Hartini, Mohd Hatta (2022) Profesor Madya Dr. Ramadhansyah Putra Jaya hasilkan konkrit berliang yang boleh digunakan dalam masa 24 jam. UMP News .

Haizad, Hassim and Ahmad Rosli, Abdul Manaf (2022) Investigation of optimum milling parameters in micro dimples machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (1). 73- 81. ISSN 2636-9575. (Published)

Hajar, Mohammed A. and Alkahtani, Ammar Ahmed and Daing Nasir, Ibrahim and Al-Sharafi, Mohammed A. and Alkawsi, Gamal and Noorminshah, A. Iahad and Mohd Ridzuan, Darun and Tiong, Sieh Kiong (2022) The effect of value innovation in the superior performance and sustainable growth of telecommunications sector : Mediation effect of customer satisfaction and loyalty. Sustainability (Switzerland), 14 (10). pp. 1-20. ISSN 2071-1050. (Published)

Halili, Munira and Fernando, Yudi (2022) Challenges of social sustainability: Supply chain management perspective. International Journal of Management Concepts and Philosophy, 1 (1). pp. 1-12. ISSN 1741-8135. (In Press / Online First) (In Press / Online First)

Halizan, Mohmood (2022) Deans List for 8 semesters, William Mah Wey Lian receives Royal Education Award Pingat Jaya Cemerlang. UMP News .

Halizan, Mohmood (2022) Nurain receives Royal Education Award Pingat Jaya Cemerlang, Dual Degree Excellence Prize. UMP News .

Halizan, Mohmood (2022) Prihatin Business Registration Scheme SPPP benefits UMP students. UMP News .

Halizan, Mohmood (2022) Skim Pendaftaran Perniagaan Prihatin SPPP beri manfaat buat pelajar UMP. UMP News .

Halizan, Mohmood (2022) UMP and Aspen Technology will expand collaboration in technology field. UMP News .

Halizan, Mohmood (2022) UMP dan Aspen Technology bakal perluas kerjasama dalam bidang teknologi. UMP News .

Halizan, Mohmood (2022) Willian Mah Wey Lian Anugerah Dekan 8 Semester terima Anugerah Pelajaran Diraja (Pingat Jaya Cemerlang). UMP News .

Halizan, Mohmood and Muhamad Tamyez, Puteri Fadzline (2022) Researchers’ motivation, interaction channels, and strategies towards university-industry collaboration: A case study approach. International Journal of Industrial Management (IJIM), 15 (1). pp. 17-25. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Halizan, Mohmood and Nur Hartini, Mohd Hatta (2022) Farhana Environmental Scientist receives Royal Education Award Pingat Jaya Cemerlang. UMP News .

Halizan, Mohmood and Nur Hartini, Mohd Hatta (2022) Farhana Saintis Alam Sekitar penerima Anugerah Pelajaran Diraja Pingat Jaya Cemerlang. UMP News .

Halizan, Mohmood and Siti Nurfarmy, Ibrahim (2022) Nurain terima Anugerah Pelajaran Diraja Pingat Jaya Cemerlang, Hadiah Kecemerlangan Dual Ijazah. UMP News .

Hamada, Hussein Mahmood and Al-Attar, Alyaa A. and Tayeh, Bassam and Fadzil, Mat Yahaya (2022) Optimizing the concrete strength of lightweight concrete containing nano palm oil fuel ash and palm oil clinker using response surface method. Case Studies in Construction Materials, 16 (e01061). pp. 1-22. ISSN 2214-5095. (Published)

Hamada, Hussein Mahmood and Alattar, Alyaa and Tayeh, Bassam and Fadzil, Yahaya and Adesina, Adeyemi (2022) Sustainable application of coal bottom ash as fine aggregates in concrete: A comprehensive review. Case Studies in Construction Materials, 16 (e01109). pp. 1-17. ISSN 2214-5095. (Published)

Hamada, Hussein Mahmood and Alattar, Alyaa and Tayeh, Bassam A. and Fadzil, Mat Yahaya and Almeshal, Ibrahim (2022) Influence of different curing methods on the compressive strength of ultra-high-performance concrete : A comprehensive review. Case Studies in Construction Materials, 17 (e01390). pp. 1-16. ISSN 2214-5095. (Published)

Hamada, Hussein Mahmood and Alattar, Alyaa and Tayeh, Bassam A. and Fadzil, Mat Yahaya and Skariah Thomas, Blessen (2022) Effect of recycled waste glass on the properties of high-performance concrete : A critical review. Case Studies in Construction Materials, 17 (e01149). pp. 1-18. ISSN 2214-5095. (Published)

Hamada, Khalaf I. and Rahim, M. F. and Raham, M. M. and A. Bakar, Rosli (2022) Throttling effect on the performance and emissions of a multi-cylinder gasoline fuelled spark ignition engine. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10084-10093. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Hamdan, Z. A and Ahmad, Z. and Johari, N. H. (2022) Investigation of muscle fatigue of the archer’s during endurance shooting. Journal of Mechanical Engineering and Sciences (JMES), 16 (3). 8987 -8995. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Hamidon, N. N. and Roslee, A. E. and Zulkapli, S. N. A. (2022) Adsorbent screening for glycidyl methacrylate extraction: A preliminary study using density functional theory. In: Innovative Manufacturing, Mechatronics & Materials Forum 2022 (iM3F 2022) , 20 July 2022 , Virtual Conference. pp. 1-4.. ISBN 978-1-83953-781-3 (Published)

Hamir Hamzah, Jaafar and Mohamad Hilmi, Mat Said and Nor Yazi, Khamis (2022) The Design and Development of a Tajweed Learning Innovation. In: KnE Social Sciences: International Conference Transdisciplinary Paradigm on Islamic Knowledge (ICONIK 2020) , 7-8 September 2020 , Kendari, Indonesia. pp. 497-507.. ISSN 2518-668X (Published)

Hamood Ahmed, Suliman Abdulmalek and Abdul Nasir, Abd Ghafar and Mohd Amir Shahlan, Mohd Aspar and Mukarram Abduljalil Mahmood, Al-Muhaya (2022) Machine learning based data monitoring system for chicken poultry. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 136.. (Published)

Hamzah, Ahmad and Mohd Syakirin, Ramli and Nur Aqilah, Othman and Badaruddin, Mohamad and Mohd Mawardi, Saari (2022) Intermittent measurement and finite escape time correlations study in H∞ filter in navigation. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 601-611., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4 (Published)

Han, Fengrong (2022) Development an accurate and stable range-free localization scheme for anisotropic wireless sensor networks. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamed Abdelaziz, Izzeldin Ibrahim).

Hanafi, M. Yusop and Ghazali, M. F. and Yusof, M. F.M. and Pi Remli, Muhammad Aminuddin and Mohd Sabri, Ahmad Azri Syazwan (2022) Leakage identification based on hydraulic transient analysis. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 37.. (Published)

Hanis Athirah, Roslan and Mohd Irwan, Adiyanto (2022) Effect of seismic design on the cost of structural works for two-storey residential building. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 153-158., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)

Hanis Hazirah, Arifin and Libriati, Zardasti and Nordin, Yahaya and Lim, Kar Sing and Nur Hafizah, Abd Khalid and Siti Asma, Abd Latif and Norhazilan, Md Noor (2022) Effect of multi-walled carbon nanotubes on infill material for pipeline composite repair. International Journal of Integrated Engineering, 14 (1). pp. 313-321. ISSN 2229-838X. (Published)

Hanis Nadiah, Ruslan (2022) Properties of mortar with natural cockle shell waste as partial sand replacement. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Khairunisa, Muthusamy).

Hanis Nadiah, Ruslan and Khairunisa, Muthusamy and Hoe, Yip Kam and N., Mohamad and Nur Farah Aziera, Jamaludin (2022) Study of workability and compressive strength of eggshell concrete. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 92.. (Published)

Hanis Nadiah, Ruslan and Khairunisa, Muthusamy and Nur Farhayu, Ariffin and Mohamed Mubarak, Abdul Wahab and Nabilla, Mohamad (2022) Effect of crushed cockle shell as partial fine aggregate replacement on workability and strength of lightweight concrete. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum (iM3F2021) , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang, Pekan, Malaysia. pp. 1826-1830., 48 (Part 6). ISSN 2214-7853 (Published)

Hanisah, Kasbon and Wan Noor Farah, Wan Shamsuddin and Nor Yazi, Khamis and Farah Liyana, Ahmad Azmey (2022) 2022 RECAP. SEE YOU IN 2023. PBM News .

Hasan, Md. Yeasir and Monir, Minhaj Uddin and Ahmed, Mohammad Tofayal and Abd Aziz, Azrina and Shovon, Shaik Muntasir and Akash, Faysal Ahamed and Hossain Khan, Mohammad Forrukh and Faruque, Md. Jamal and Rifat, Md. Shamiul Islam and Hossain, Md. Jafar and Kundu, Prionti and Akter, Rafica and Ali, Sohag (2022) Sustainable energy sources in Bangladesh: A review on present and future prospect. Renewable and Sustainable Energy Reviews, 155 (111870). pp. 1-20. ISSN 1364-0321. (Published)

Hashim, N. A. and Mazilan, M. S. R. and Che Man, R. and Mohd Arshad, Z. I. and Abdul Mudalip, S. K. (2022) Recovery of omega-3 fish oil from Monopterus albus using microwave assisted extraction process. In: AIP Conference Proceedings; 2nd Energy Security and Chemical Engineering Congress, ESChE 2021 , 3 - 5 November 2021 , Gambang, Kuantan. pp. 1-2., 2610 (060015). ISSN 0094-243X ISBN 978-073544378-5 (Published)

Hasiah, Mat Salleh and Norazmi, Anas and Siti Marsitah, Mohd Mokhtar and Norhapizah, Mohd Burhan and Rashidi, Abbas (2022) Muslim Elderly Care based on Maqasid Shariah A Case Study of Pahang State, Malaysia. International Journal of Academic Research in Business and Social Sciences (IJARBSS), 12 (11). pp. 2222-2231. ISSN 2222-6990. (Published)

Hasimi, Muhamad (2022) Tuntutan waris Sultan Sulu Dewan Rakyat disaran syor bentang kertas putih. Astro Awani .

Hasmiza, Yaakob (2022) Integrasi pembelajaran sains dan latihan biofeedback dalam meningkatkan prestasi mata pelajaran sains sekolah rendah. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Nubli, Abdul Wahab).

Hasmiza, Yaakob and Muhammad Nubli, Abdul Wahab (2022) Integrasi pembelajaran sains dan latihan biofeedback dalam meningkatkan prestasi mata pelajaran sains murid sekolah rendah. International Journal of Humanities Technology and Civilization (IJHTC), 7 (1). pp. 26-32. ISSN 2289-7216. (Published)

Hasnah, Hussiin (2022) Kebebasan di media sosial lunturkan nilai murni masyarakat. Berita Harian . p. 10.

Hasnah, Hussiin (2022) Kesang Tua, Melaka: Dari Selat Melaka ke Pentas Dunia. UMP News .

Hasnah, Hussiin (2022) Mendidik masyarakat fahami politik. Harian Metro .

Hasnah, Hussiin (2022) Penerimaan pelajar UMP terhadap pembelajaran subjek Pengajian Malaysia satu kajian ringkas. UMP News .

Hasnah, Hussiin (2022) Rumusan permasalahan dan cabaran pelajar UMP dalam menjalani pembelajaran secara dalam talian. UMP News .

Hasnah, Hussiin (2022) Wanita perlu berani teroka peluang, elak ketinggalan. Berita Harian .

Hasnah, Junid (2022) Empat universiti Malaysia meterai surat hasrat kerjasama TVET di China. Bernama .

Hasnulhadi, Jaafar and Liyana, Tajul and Mohd, Zamzuri and Zailani Zainal, Abidin and Muhamad Nasir, Murad and Zamzuri, Hamedon (2022) Effect of small corner radius in cold punching of 22MnB5 die-quenched boron steel sheets. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 90-93., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)

Hassan Murshid, Zsa Zsa Nura’in and Ismail, Siti Zubaidah (2022) Investigating efficiency of materials management at original equipment manufacturer (OEM). Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 18-25. ISSN 2636-9575. (Published)

Hassin, Noor Syafiqah and Misnon, I. I. and Rasidi, R. and Ahmad, Mohd Rozi and Jasmani, Latifah and Jose, Rajan (2022) Regenerated cellulose from oil palm empty fruit bunch using ionic liquids mixture. Current Science and Technology (CST), 2 (1). pp. 12-19. ISSN 2785-8804. (Published)

Hazim, Yusof and Islam, Md Nahidul and Mohd Shawal, Jadin and Mahfuzah, Mustafa and Norizam, Sulaiman (2022) EEG mechanism interaction to evaluate vehicle’s driver microsleep. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 120.. (Published)

Haziq Syakir, Hamzah (2022) Design And Analysis Of Electronic Measurement Circuits Of Invasive Electrical Capacitance Tomography In Identifying Oil-Gas Regime For Conducting Pipe Application. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Nor Hasrul Akhmal, Ngadiman and Nor Akmal, Fadil and Zawati, Harun (2022) Outlook on the Carbon-Based Materials for Heavy Metal Removal. Biointerface Research In Applied Chemistry, 12 (4). pp. 5303-5323. ISSN 2069-5837. (Published)

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Rishen Nair, Krishnan (2022) Possible Health Risk of Cellulose-Based Materials. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 109-115.. ISBN 978-981-19-2890-1 (Published)

Hazirah, Ismail (2022) Investigation of quenching heat transfer characteristics in metal oxide nanofluids. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhamad Zuhairi, Sulaiman).

Hazirah, Ismail and Muhamad Zuhairi, Sulaiman and Okawa, Tomio (2022) Heat transfer characteristics of metallic body during quenching in saturated nanofluids. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9403-9411. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Hazlina, Faizal (2022) UMP first time listed in world rating THE WUR 2023. UMP News .

Hazlina, Faizal (2022) UMP julung kali tersenarai dalam penarafan dunia THE WUR 2023. UMP News .

Hazmin, Aris (2022) Kolaborasi strategik akademik UMP pergiat inisiatif pengantarabangsaan. UMP News .

Hazmin, Aris (2022) UMPs academic strategic collaboration intensifies internationalisation initiative. UMP News .

Hazwani, Shafei and Afiqah, R. Radzi and Algahtany, Mohammed and Rahimi, A. Rahman (2022) Construction 4.0 Technologies and Decision-Making: A Systematic Review and Gap Analysis. Buildings, 12 (2206). pp. 1-19. ISSN 2075-5309. (Published)

Heja Ibrahim, Adil and Mohammad R., Thalji and Suhad A., Yasin and Ibtisam A., Saeed and Mohammed A., Assiri and Chong, Kwok Feng and Gomaa A. M., Ali (2022) Metal-organic frameworks (MOFs) based nanofiber architectures for the removal of heavy metal ions. RSC Advances, 12 (3). pp. 1433-1450. ISSN 2046-2069. (Published)

Helmi, Mohamed Isa (2022) MTUN buka peluang pengajian tinggi untuk bidang TVET. UMP News .

Heng, Sheng Guang (2022) Analysis of performance between kinect v1 and kinect v2 for various facial part movements using supervised machine learning techniques. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosdiyana, Samad).

Heri, Pratikno and Mohd Zamri, Ibrahim (2022) Image segmentation of women’s salivary ferning patterns using harmony frangi filter. In: Lecture Notes in Electrical Engineering; 5th International Conference on Electrical, Control and Computer Engineering, InECCE 2019 , 29 July 2019 , Kuantan. pp. 605-622., 632. ISSN 1876-1100 ISBN 978-981152316-8 (Published)

Hezelin Elayana, Shaian (2022) Chemical composition of treated agarwood (Aquilaria malaccensis) essential oil. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Saiful Nizam, Tajuddin).

Hian, Heng Chun and Mohd Najib, Yacob (2022) Emergency response and preparedness assessment among migrant construction workers. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 220.. (Published)

Hidayat, Untung and Hendrawati, Tri Yuni and Budiyanto, Budiyanto and Ramadhan, Anwar Ilmar and Wan Hamzah, Azmi (2022) Drying and pectin extraction from waste lemon peel (citrus limon) using extraction process with ultrasonic waves. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 225.. (Published)

Ho, Chia Hui (2022) Vision Based Pedestrian Traffic Counting Using Deep Learning Method. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ho, Chia Min and Doh, S. I. and Li, X. and Chin, S. C. and Ashraf, Teara (2022) RSM-based modelling of cement mortar with various water to cement ratio and steel slag content. Physics and Chemistry of the Earth, 128 (103256). pp. 1-9. ISSN 1474-7065. (Published)

Ho, Chia Min and Doh, Shu Ing and A. K. A., Mohammad Al-Btoush and Li, XiaoFeng and Siew, Choo Chin (2022) The impact of alkali activator dosage on the compressive strength and water absorption of steel slag concrete. In: Materials Today: Proceedings, 3rd Symposium on Industrial Science and Technology (SISTEC2021) , 25-26 August 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1323-1326., 52 (Part 2). ISSN 2214-7853 (Published)

Hoque, Md. Ikramul and Abdo Qasem, Mohammed Hasan and Parvez, Md. Shohan (2022) Municipal solid waste management in Khulna City Corporation Bangladesh. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 78.. (Published)

Hossain, Md Junayed and Abdullah, Sheikh Md and Barkatullah, Mohammad and Miahh, Md Saef Ulla and Sarwar, Talha and Monir, Md Fahad (2022) Predicting the success of suicide terrorist attacks using different machine learning algorithms. In: Proceedings of 2022 25th International Conference on Computer and Information Technology, ICCIT 2022 , 17-19 December 2022 , Cox's Bazar. pp. 1-6. (187046). ISBN 979-835034602-2 (Published)

Hossain, Md. Sanower and Hidayah, Karuniawati and Jairoun, Ammar Abdulrahman and Urbi, Zannat and Ooi, Der Jiun and John, Akbar and Lim, Ya Chee and K. M., Kaderi Kibria and A. K. M., Mohiuddin and Ming, Long Chiau and Goh, Khang Wen and Hadi, Muhammad Abdul (2022) Colorectal cancer: A review of carcinogenesis, global epidemiology, current challenges, risk factors, preventive and treatment strategies. Cancers, 14 (7). pp. 1-25. ISSN 2072-6694. (Published)

Hossen, Md. Arif and Solayman, H. M. and Leong, Kah Hon and Sim, Lan Ching and Yaacof, Nurashikin and Abd Aziz, Azrina and Lihua, Wu and Monir, Minhaj Uddin (2022) A comprehensive review on advances in TiO2 nanotube (TNT)-based photocatalytic CO2 reduction to value-added products. Energies, 15 (22). pp. 1-23. ISSN 1996-1073. (Published)

Hossen, Md. Arif and Solayman, H. M. and Leong, Kah Hon and Sim, Lan Ching and Yaacof, Nurashikin and Abd Aziz, Azrina and Wu, Lihua and Monir, Minhaj Uddin (2022) Recent progress in TiO2-Based photocatalysts for conversion of CO2 to hydrocarbon fuels: A systematic review. Results in Engineering, 16 (100795). pp. 1-18. ISSN 2590-1230. (Published)

Hou, Wentao and Ding, Yuquan and Huang, Guoqaing Qiang and Huda, Nazmul and Luqman Hakim, Ahmad Shah and Piao, Zhongyu and Shen, Yifu and Shen, Zhikang and Gerlich, Adrian P. (2022) The role of pin eccentricity in friction stir welding of Al‑Mg‑Si alloy sheets : microstructural evolution and mechanical properties. International Journal of Advanced Manufacturing Technology, 121 (11-12). pp. 7661-7675. ISSN 0268-3768. (Published)

How, Chun Kit and Mohd Khairuddin, Ismail and Mohd Razman, Mohd Azraai and Anwar, P. P. Abdul Majeed and Mohd Isa, Wan Hasbullah (2022) Development of audio-visual speech recognition using deep-learning technique. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 88-95. ISSN 2637-0883. (Published)

Hu, Haichao and Wei, Qiang and Liu, Boya and Liu, Yun and Hu, Ning and Quanjin, Ma and Wang, Chuancai (2022) Progressive damage behaviour analysis and comparison with 2D/3D hashin failure models on carbon fibre–reinforced aluminium laminates. Polymers, 14 (2946). pp. 1-25. ISSN 2073-4360. (Published)

Hudi @ Jahid, Hj Sidek (2022) Pembinaan modul kaedah rawatan refleksologi spiritual islam (RSI) dan penilaian keberkesanannya di pusat rawatan islam manarah. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahyuddin, Ismail).

Hung, William Chin Wei and Muhammad Aizzat, Zakaria and Muhammad Izhar, Ishak and Mohamad Heerwan, Peeie (2022) Object tracking for autonomous vehicle using YOLO V3. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang, Kuantan. pp. 265-273., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Husna Izzati, Osman and Ching, Dennis Ling Chuan and Nur Fatihah, Mod Omar and Vieru, Dumitru and Zulkhibri, Ismail (2022) Generalized cattaneo’s law over a vertical cylinder on casson fluids. CFD Letters, 14 (12). pp. 38-51. ISSN 2180-1363. (Published)

Husna Izzati, Osman and Nur Fatihah, Mod Omar and D., Vieru and Zulkhibri, Ismail (2022) The convection of unsteady casson fluid over an infinite inclined isothermal plate. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 162.. (Published)

Husna Izzati, Osman and Nur Fatihah, Mod Omar and Vieru, Dumitru and Zulkhibri, Ismail (2022) A Study of MHD Free Convection Flow Past an Infinite Inclined Plate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 92 (1). pp. 18-27. ISSN 2811-3950. (Published)

Husna Izzati, Osman and Vieru, Dumitru and Zulkhibri, Ismail (2022) Transient Axisymmetric Flows of Casson Fluids with Generalized Cattaneo’s Law over a Vertical Cylinder. Symmetry, 14 (7). pp. 1-14. ISSN 2073-8994. (Published)

Husni, Husin and Erdiwansyah, Erdiwansyah and Ahmadi, Ahmadi and Fahrizal, Nasution and Rinaldi, Wahyu and Abnisa, Faisal and Rizalman, Mamat (2022) Efficient hydrogen production by microwave-assisted catalysis for glycerol-water solutions via NiO/zeolite-CaO catalyst. South African Journal of Chemical Engineering, 41. pp. 43-50. ISSN 1026-9185. (Published)

Husni, M. and Jaya, M. Izham and Eh Phon, Danakorn Nincarean and Hisham, Syifak Izhar and Ab Razak, Mohd Faizal (2022) Perception and adoption of digital technology in students’ data management: A case study of tasmik program. Mathematical Statistician and Engineering Applications (MSEA), 71 (3s2). pp. 1422-1443. ISSN 2094-0343. (Published)

Hussain, Suhaidah and Sumiea, Ebrahim Hamid Hasan and Ahmad, Mohd Hanafiah and Kumar, Senthil and Moshood, Taofeeq D. (2022) Factors affecting the public higher education institution (PHEI) acceptance of online meetings applications during COVID-19 pandemic: An empirical study. Journal of Applied Research in Higher Education, Ahead-of-print (Ahead-of-print). pp. 1-21. ISSN 2050-7003. (In Press / Online First) (In Press / Online First)

Hussin, N.F.R. and Rosli, N. (2022) Study of underfill flow in microchip packaging using ansys. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 76-82. ISSN 2636-9575. (Published)

Hwa, Phua Jia and Mahendra Kumar, Jothi Letchumy and Rashid, Mamunur and Musa, Rabiu Muazu and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2022) The classification of electrooculography signals: A significant feature identification via mutual information. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. 1005 -1012., 730. ISSN 1876-1100 ISBN 978-981-33-4596-6 (Published)

I

I. A., Kamaruddin and Mohd Azri Hizami, Rasid and Nurul Fatimah, Abdullah and Abbas, Abdul Wahab (2022) Evaluation of a DC Motor temperature response characterization method under different sampling interval. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 345-360., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Ibrahim, Azian and Fernando, Yudi and Tseng, Ming-Lang and Lim, Ming K. (2022) Low-carbon warehousing practices and challenges: Insights from emerging country. International Journal of Logistics Research and Applications, ahead-of-print (ahead-of-print). pp. 1-21. ISSN 1367-5567. (In Press / Online First) (In Press / Online First)

Ibrahim, Elganidi and Basem, Elarbe and Norida, Ridzuan and Norhayati, Abdullah (2022) Synthesis, characterisation and pre-evaluation of a novel terpolymer as pour point depressants to improve the Malaysian crude oil flowability. Journal of Petroleum Exploration and Production Technology, 12 (7). 2067 -2081. ISSN 2190-0558. (Published)

Ibrahim, Rosli (2022) Development and fabrication of ammonia gas leakage detection and monitoring system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ibrahim Moh'd Abdel, Qader Saraireh (2022) Bim adoption framework to enhance efficiency of contractual issues in the jordanian construction sector. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Haron, Ahmad Tarmizi).

Idris, Idasuzana and Idris, Mohd Awang and Muhamad Tamyez, Puteri Fadzline and Zynuddin, Siti Nadya (2022) Kajian Longitudinal. In: Metodologi kuantitatif dan kualitatif dalam sains sosial. Penerbit Universiti Malaya, Universiti Malaya, Kuala Lumpur, pp. 59-84. ISBN 978-967-488-230-3

Ihsan Naiman, Ibrahim (2022) Simulation and experimental analysis on automotive radiator using organic nanocellulose. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Devarajan, Ramasamy).

Ilyana Najwa Aiza, Asmad and Mubarak-Ali, Al-Fahim and Nik Intan Syahiddatul Ilani, Jailani (2022) Enhancement of generic code clone detection model for python application. International Journal of Software Engineering & Computer Sciences (IJSECS), 8 (1). pp. 1-10. ISSN 2289-8522. (Published)

Imaduddin, Abidin (2022) University-industry collaborations and its impact on firm performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rashidi, Ab Hamid).

Imam, Ul Ferdous (2022) Influence of notch constraint on creep damage evolution and rupture life of grade 91 steel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nasrul Azuan, Alang).

Imtiaz, Hassan Taj (2022) Augmenting efl vocabulary learning and reading comprehension through mobile phone-based vocabulary learning tasks and computer-based reading activites. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ali, Fatimah).

Intan Syahiera, Azli and Afkar Rabbani Hidayatullah, Hipeni and Khairatun Najwa, Mohd Amin (2022) Cellulose nanocrystals derived from oil palm empty fruit bunch reinforced natural rubber latex nanocomposites. Journal of Oil Palm Research, 34 (3). pp. 497-505. ISSN 1511-2780. (Published)

Iqbal, A. R. and Muhammad, Khairul Fikri (2022) Analysis and design of control system for desktop size concrete 3D printer. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 80-87. ISSN 2637-0883. (Published)

Iqbal, Mohammad and Setiawan, Muhammad Nanda and Isa Irawan, Mohammad Isa and Ku Muhammad Naim, Ku Khalif and Noryanti, Muhammad and Mohd Khairul Bazli, Mohd Aziz (2022) Cardiovascular disease detection from high utility rare rule mining. Artificial Intelligence in Medicine, 131 (102347). pp. 1-12. ISSN 0933-3657. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Cionita, Tezara and Siregar, Januar Parlaungan and Laksmidewi, Dwinita and Baskara, Gregorius Dimas and Mohd Zulkifly, Abdullah and Ramli, Junid and Hadi, Agung Efriyo and Mohammad Hazim, Mohamad Hamdan and Najid, Najid (2022) Overview of the important factors influencing the performance of eco-friendly brake pads. Polymers, 14 (1180). pp. 1-22. ISSN 2073-4360. (Published)

Irene, Wei Kiong Ting and Norazlin, Ahmad and Gurrib, Ikhlaas and Bhaskaran, Rajesh Kumar (2022) The role of controlling shareholders in influencing firm efficiency: a case of Taiwanese electronics firms. International Journal of Business Excellence (IJBEX), 26 (2). pp. 261-279. ISSN 1756-0055. (Published)

Irnie Azlin, Zakaria and Wan Ahmad Najmi, Wan Mohamed and N. H.A., Azid and M. A., Suhaimi and Wan Hamzah, Azmi (2022) Heat transfer and electrical discharge of hybrid nanofluid coolants in a fuel cell cooling channel application. Applied Thermal Engineering, 210 (118369). pp. 1-13. ISSN 1359-4311. (Published)

Irza Hanie, Abu Samah and Ummi Naiemah, Saraih and Wan Ahmad Fauzi, Wan Husain and Nur Syafiqah, A. Rahim and Siti Aisyah, Panatik and Zulhaidi, Mohd Jawi (2022) Using Confidence Interval Based Estimation of Relevance (CIBER) to Determine Women's Emotion and Perception on Malaysia Road Environment During COVID-19. SSRN. pp. 1-10. (Published)

Isarji, Sarudin and Amir Akramin, Shafie and Zainab, Mohd Noor and Mohd Azmir, Mohd Azhari and Masria, Mustafa and Rozzana, Mohd Said and Nik Aloesnita, Nik Mohd Alwi (2022) Mapping Integration of Sustainable Development Goals for Engineering Programmes at International Islamic University Malaysia (IIUM). In: 5th International Conference on Engineering Professional Ethics And Education (ICEPEE’22) , 9-10 August 2022 , Virtual Conference. pp. 1-7.. (Accepted)

Iskandar, Waini and Abdul Rahman, Mohd Kasim and Najiyah Safwa, Khasi’ie and Nurul Amira, Zainal and Anuar, Ishak and Ioan, Pop (2022) Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎. Journal of Applied and Computational Mechanics, 8 (2). pp. 745-753. ISSN 2383-4536. (Published)

Iskandar, Waini and Najiyah Safwa, Khashi’ie and Abdul Rahman, Mohd Kasim and Nurul Amira, Zainal and Khairum, Hamzah and Norihan, Md Arifin and Pop, Ioan (2022) Unsteady magnetohydrodynamics (mhd) flow of hybrid ferrofluid due to a rotating disk. Mathematics, 10 (10). pp. 1-20. ISSN 2227-7390. (Published)

Iskandar, Waini and Najiyah Safwa, Khasi’ie and Abdul Rahman, Mohd Kasim and Nurul Amira, Zainal and Anuar, Ishak and Ioan, Pop (2022) Radiative heat transfer of Reiner–Philippoff fluid flow past a nonlinearly shrinking sheet Dual solutions and stability analysis. Chinese Journal of Physics, 77. pp. 45-56. ISSN 0577-9073. (Published)

Iskandar, Waini and Najiyah Safwa, Khasi’ie and Abdul Rahman, Mohd Kasim and Nurul Amira, Zainal and Anuar, Ishak and Ioan, Pop (2022) Thermal analysis of non‑Newtonian fluid flow past a permeable shrinking wedge with magnetohydrodynamic effects: Reiner–Philippoff model. Journal of Thermal Analysis and Calorimetry, 47 (23). pp. 13561-13571. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Islam, Aminul and Roy, Srimonta and Teo, Siow Hwa and Khan, Shahjalal and Taufiq-Yap, Yun Hin and Azrina, Abd Aziz and Monir, Minhaj Uddin and Rashid, Umer and Vo, Dai-Viet N. and Mohd Lokman, Ibrahim and Znad, Hussein and Awual, Md. Rabiul (2022) Functional novel ligand based palladium(II) separation and recovery from e-waste using solvent-ligand approach. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 632 (127767). pp. 1-11. ISSN 0927-7757. (Published)

Islam, Md Nahidul and Ahmed, Fahim and Ahammed, Md Tanvir and Rashid, Mamunur and Bari, Bifta Sama (2022) Rice disease identification through leaf image and IoT based smart rice field monitoring system. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 529-539., 900. ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Islam, Md Nahidul and Ahmed, Fahim and Ahammed, Md Tanvir and Rashid, Mamunur and Bari, Bifta Sama (2022) Rice disease identification through leaf image and iot based smart rice fieldmonitoring system. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 529-539., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Islam, Md Nahidul and Norizam, Sulaiman and Bari, Bifta Sama and Rashid, Mamunur and Mahfuzah, Mustafa (2022) A hybrid scheme for AEP based hearing deficiency diagnosis: CWT and convoluted k-nearest neighbour (CKNN) pipeline. Neuroscience Informatics, 2 (1). pp. 1-13. ISSN 2772-5286. (Published)

Islam, Md Nahidul and Norizam, Sulaiman and Rashid, Mamunur and Mahfuzah, Mustafa and Md Jahid, Hasan (2022) Auditory Evoked Potentials (AEPs) Response Classification: A Fast Fourier Transform (FFT) and Support Vector Machine (SVM) Approach. In: Proceedings of the 12th National Technical Seminar on Unmanned System Technology 2020: NUSYS’20 , 27-28 October 2020 , Virtually via the IEEE OES Malaysia Virtual/Online Conference Platform. pp. 539-549., 770. (Published)

Islam, Md Nahidul and Norizam, Sulaiman and Rashid, Mamunur and Mahfuzah, Mustafa and Mohd Shawal, Jadin (2022) Investigation of Time-Domain and Frequency-Domain Based Features to Classify the EEG Auditory Evoked Potentials (AEPs) Responses. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Universiti Malaysia Pahang (Virtual). pp. 497-508., 730. ISBN 978-981-33-4597-3 (Published)

Islam, Md Shofiqul and Islam, Md Nahidul and Noramiza, Hashim and Rashid, Mamunur and Bari, Bifta Sama and Al Farid, Fahmid (2022) New hybrid deep learning approach using bigru-bilstm and multilayered dilated cnn to detect arrhythmia. IEEE Access, 10. pp. 58081-58096. ISSN 2169-3536. (Published)

Islam, Md Shofiqul and Sultana, Sunjida and Farid, Fahmid Al and Islam, Md Nahidul and Rashid, Mamunur and Bari, Bifta Sama and Noramiza, Hashim and Mohd Nizam, Husen (2022) Multimodal hybrid deep learning approach to detect tomato leaf disease using attention based dilated convolution feature extractor with logistic regression classification. Sensors, 22 (6079). pp. 1-31. ISSN 1424-8220. (Published)

Islam, Md. Nahidul and Norizam, Sulaiman and Mahfuzah, Mustafa (2022) Diagnosis of hearing impairment based on wavelet transformation and machine learning approach. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 705-715., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4 (Published)

Islam, Md. Toriqule and Hasan, Md Kamrul and Zaied, Khalid and Fadzil, Mat Yahaya (2022) A comprehensive review of the features of self‑compacting rubberized concrete in the fresh and hardened states. Architecture, Structures and Construction. pp. 1-23. ISSN 2730-9894. (Published)

Islam, Mir Sujaul and Khalid, Z. B. and Gabar, S. M. and Fadzil, Mat Yahaya (2022) Heavy metals pollution sources of the surface water of the Tunggak and Balok River in the Gebeng Industrial Area, Pahang, Malaysia. International Journal of Energy and Water Resources, 6 (1). pp. 113-120. ISSN 2522-0101. (Published)

Ismail, Muhammad Yusri and Beg, M. S. and Jamlos, M. F. and Azmi, W. H. and Badrulhisam, N. H. and Awad, Omar I. (2022) Potential and limitation of internet of things (IOT) application in the automotive industry: An overview. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). 9939 -9949. ISSN 2180-1606. (Published)

Ismail, Rifky and Cionita, Tezara and Lai, Yinling and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Bayuseno, Athanasius Priharyoto and Nugraha, Fariz Wisda and Muhamadin, Rilo Chandra and Irawan, Agustinus Purna and Hadi, Agung Efriyo (2022) Characterization of PLA/PCL/green mussel shells Hydroxyapatite (HA) biocomposites prepared by chemical blending methods. Materials, 15 (8641). pp. 1-17. ISSN 1996-1944. (Published)

Ismail, Siti Noraishah and Ramli, Azizan and Abdul Aziz, Hanida (2022) Does expert judgement is important in mining industry?: A systematic literature review. Journal of Governance & Integrity, 5 (2). pp. 249-266. ISSN 2600-7479. (Published)

Ismail Ali, Abdul Aziz (2022) Tooth bending stress and tooth impact stress of thin-rimmed spur gear. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daing Mohamad Nafiz, Daing Idris).

Ittoo, Bhavishkar and Ooi, Jong Boon and Tran, Manh Vu and Jaliliantabar, Farzad and Najafi, Gholamhassan and Swamy, Varghese (2022) Effects of dispersed multiwalled carbon nanotubes on the micro-explosion and combustion characteristics of 2-methylfuran – diesel mixture droplets. Fuel, 316 (123308). pp. 1-10. ISSN 0016-2361. (Published)

J

J., Kananathan and K., Rajan and M., Samykano and K., Kadirgama and K., Moorthy and M. M., Rahman (2022) Preliminary Tensile Investigation of FDM Printed PLA/Coconut Wood Composite. In: ICMER 2021: Technological Advancement in Instrumentation & Human Engineering , 26-27 October 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 339-350., 882. ISBN 978-981-15-7309-5 (Published)

J. J., Jui and M. A., Ahmad and M. I. M., Rashid (2022) Levy slime mould algorithm for solving numerical and engineering optimization problems. In: Proceedings of the 6th International Conference on Electrical, Control and Computer Engineering , 23 August 2021 , Kuantan, Malaysia. pp. 381-394., 842. ISBN 978-981168689-4 (Published)

J. J., Jui and M. A., Ahmad and M. I. M., Rashid (2022) Levy tunicate swarm algorithm for solving numerical and real-world optimization problems. In: Proceedings of the 6th International Conference on Electrical, Control and Computer Engineering , 23 August 2021 , Kuantan, Malaysia. pp. 417-427., 842. ISBN 978-981168689-4 (Published)

Jabbar, Waheb A. and Annathurai, Sanmathy and Tajul Ariffin, A. Rahim and M. Fitri, Mohd Fauzi (2022) Smart energy meter based on a long-range wide-area network for a stand-alone photovoltaic system. Expert Systems with Applications, 197 (116703). pp. 1-18. ISSN 0957-4174. (Published)

Jabbar, Waheb A. and Subramaniam, Thanasrii and Ong, Andre Emelio and Mohd Iqmal, Shu'Ib and Wu, Wenyan and de Oliveira, Mario A. (2022) LoRaWAN-Based iot system implementation for long-range outdoor air quality monitoring. Internet of Things, 19 (100540). pp. 1-25. ISSN 2542-6605. (Published)

Jacob, Jeeja and Pandey, Adarsh Kumar and Nasrudin, Abd Rahim and Selvaraj, Jeyraj A.L. and Samykano, Mahendran and Saidur, Rahman Md and Tyagi, Vineet Veer (2022) Concentrated Photovoltaic Thermal (CPVT) systems : Recent advancements in clean energy applications, thermal management and storage. Journal of Energy Storage, 45 (103369). pp. 1-25. ISSN 2352-152X. (Published)

Jadhav, Pramod and Bin Khalid, Zaied and Mishra, Puranjan and Zularisam, Abdul Wahid and Mohd Nasrullah, Zulkifli (2022) Challenges and emerging approaches in life cycle assessment of engineered nanomaterials usage in anaerobic bioreactor. In: Techno economics and Life Cycle Assessment of Bioreactors: Post-Covid19 Waste Management Approach. Elsevier, India, pp. 185-206. ISBN 978-0-323-89848-5

Jadhav, Pramod and Zaied, Khalid and Mishra, Puranjan and Zularisam, Abdul Wahid and Mohd, Nasrullah (2022) Challenges and emerging approaches in life cycle assessment of engineered nanomaterials usage in anaerobic bioreactor. In: Techno economics and Life Cycle Assessment of Bioreactors Post Covid19 Waste Management Approach. Post-Covid19 Waste Management Approach . Elsevier, U.K., pp. 207-222. ISBN 978-0-323-89848-5

Jadhav Pramod, Chandrakant and Zaied, Khalid and Krishnan, Santhana and Bhuyar, Prakash and A. W., Zularisam and Abdul Syukor, Abd Razak and Mohd Nasrullah, Zulkifli (2022) Application of iron‐cobalt‐copper (Fe‐Co–Cu) trimetallic nanoparticles on anaerobic digestion (AD) for biogas production. Biomass Conversion and Biorefinery. pp. 1-11. ISSN 2190-6823. (Published)

Jagathesvaran, Veeramony and M. Nafis, O. Z. (2022) A customizable controller for 3 axis modular CNC machine. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 55-62. ISSN 2636-9575. (Published)

Jaiyeoba, Haruna Babatunde and Moha Asri, Abdullah and Wan Mohd Naziman, Wan Ahmad and Fernando, Yudi (2022) Do Microtakaful Schemes as Risk Management Tools Contribute to Halal Small Business Sustainability? Evidence from Malaysia. Journal of Islamic Finance, 11 (2). pp. 126-137. ISSN 2289-2117. (Published)

Jaliliantabar, F. (2022) Thermal conductivity prediction of nano enhanced phase change materials: A comparative machine learning approach. Journal of Energy Storage, 46 (103633). pp. 1-20. ISSN 2352-152X. (Published)

Jaliliantabar, Farzad and Rizalman, Mamat and Kumarasamy, Sudhakar (2022) Latent heat prediction of nano enhanced phase change material by ann method. Energy Engineering: Journal of the Association of Energy Engineering, 119 (3). pp. 847-861. ISSN 0199-8595. (Published)

Jamilah Bebe, Mohamad (2022) Keluarga merdeka UMP. UMP News .

Jamilah Bebe, Mohamad (2022) Moh dereh atlet UMP. UMP News .

Jarrud Mohamed, Muftah Mohamed (2022) Flexural performance of built-up cold-formed steel beam (CFSB) filled with concrete. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Lim, Kar Sing).

Javed, Omama and Abd Aziz, Radhiyah (2022) Review: Two-dimensional layered material based electrodes for lithium ion and sodium ion batteries. In: Lecture Notes in Electrical Engineering; 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 399-418., 882. ISSN 1876-1100 ISBN 978-981191576-5 (Published)

Javed, Omama and Radhiyah, Abd Aziz (2022) Bimetallic Prussian Blue Analogues: An Efficient Electrode Alternative for Energy Storage Applications. Materials Science Forum, 1056. pp. 45-52. ISSN 1662-9752. (Published)

Javed, Omama and Radhiyah, Abd Aziz (2022) Effect of graphene oxide loading on cobalt oxide performance as electrocatalyst for methanol oxidation reaction. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 126.. (Published)

Jawad, Asif (2022) Controlling shareholdings, intellectual capital and firm performance: evidence from Malaysian listed firms. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wei, Irene Kiong Ting).

Jaya, M. Izham and Ab Razak, Mohd Faizal (2022) Dynamic ransomware detection for windows platform using machine learning classifiers. JOIV: International Journal on Informatics Visualization, 6 (2). 469 -474. ISSN 2549-9904. (Published)

Jaya, M. Izham and Ab Razak, Mohd Faizal and Mohamad, Mastura and Hisham, Syifak Izhar (2022) Cybercrime behaviour in the context of youth development. Mathematical Statistician and Engineering Applications (MSEA), 71 (3s2). pp. 1395-1421. ISSN 2094-0343. (Published)

Jaya Vejayan, Palliah and Sharifah Aminah, Tuan Said and Ahmad, M. Farid and Hani K., Agustar and Srikumar, Chakravarthi (2022) Antioxidant, antidiabetic and antibacterial activities of curd derived from selected plants fortified with ocimum tenuiflorum. Tropical Journal of Natural Product Research, 6 (10). pp. 1607-1613. ISSN 2616-0684. (Published)

Jayabharty, Mogan and Wan Sharuzi, Wan Harun and Ishak, Ismail and Fadhlur Rahman, Mohd Romlay (2022) Parameter influence on mechanical properties of ABS; using FDM. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 68.. (Published)

Jeff Collven, Claisdell Lorren (2022) Voltage Sag And Swell Mitigation Using Grey Wolf Optimizer (Gwo) For A Single-Phase Grid-Connected Photovoltaic System. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Jeroish, Z. E. and Bhuvaneshwari, K. S. and Samsuri, F. and Narayanamurthy, V. (2022) Microheater: Material, design, fabrication, temperature control, and applications—a role in COVID-19. Biomedical Microdevices, 24 (3). pp. 1-49. ISSN 1387-2176. (Published)

Jeroish Zachariah, Ezhilnavaroji (2022) Design and analysis of integrated paper based biochip with microheater for lamp using viral mimicking nano particles. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Fahmi, Samsuri).

Jessnor Arif, Mat Jizat and Anwar, P. P. Abdul Majeed and Ahmad Fakhri, Ab. Nasir and Zahari, Taha and Yuen, Edmund and Lim, Shi Xuen (2022) Evaluation of the Transfer Learning Models in Wafer Defects Classification. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Universiti Malaysia Pahang (Virtual). pp. 873-881., 730. ISBN https://doi.org/10.1007/978-981-33-4597-3_78 (Published)

Ji, Yuanfa and He, Jianzhong and Sun, Xiyan and Bai, Yang and Wei, Zhaochuan and Kamarul Hawari, Ghazali (2022) Learning augmented memory joint aberrance repressed correlation filters for visual tracking. Symmetry, 14 (1502). pp. 1-19. ISSN 2073-8994. (Published)

Ji, Yuanfa and Liu, Yu and Sun, Xiyan and Guo, Ning and Zhao, Songke and Kamarul Hawari, Ghazali (2022) Modeling and correction analysis of regional ionospheric modeling. In: IEEE 6th Information Technology and Mechatronics Engineering Conference, ITOEC 2022 , 4-6 March 2022 , Chongqing. pp. 1037-1042. (177924). ISBN 978-166543185-9 (Published)

Ji, Yuanfa and Song, Sisi and Sun, Xiyan and Kamarul Hawari, Ghazali and Zhao, Songke (2022) Analysis of anti-multipath performance based on traditional acquisition algorithm of boc signal. In: 2022 IEEE 5th International Conference on Artificial Intelligence and Big Data, ICAIBD 2022 , 27-30 May 2022 , Virtual, Chengdu. pp. 455-458. (180907). ISBN 978-166549913-2 (Published)

Jia, Tanzhen and Zulkifli, Ahmad@Manap and Muhammad Amirul Afiq, Saidi and Mohamad Zairi, Baharom (2022) Development and effect of the body balance to the pressure sensor monitoring. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 120-123., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)

Jing, L. and Kamarudin, D. and Hu, X. (2022) Research limitations and future directions on the effect of educational practice on the cultivation of teachers' professional competency of education major students: A case of M University in China. International Journal of Education and Knowledge Management, 5 (3). pp. 1-15. ISSN 2616-4698. (Published)

Joachim, Agostain (2022) Ump Intelligent Chatbot Using Dialogflow. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Joannes Niegel, Mekiun (2022) Design and development of surface unmanned vehicle (SUV) system mechanism and vessel. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Johari, N. A. and Juliawati, A. and Zanurin, A. and Mohamed, N. S. and Alang, N. A. and M. Zain, M. Z. (2022) Recent progress of self-healing coatings for magnesium alloys protection. Journal of Coatings Technology and Research, 19 (3). 757 -774. ISSN 1547-0091. (Published)

John Paul, Nadakkal and K., Kadirgama and Mahendran, Samykano and Saidur, R. and Pandey, A. K. and Mohan, R. V. (2022) An updated review on low-temperature nanocomposites with a special focus on thermal management in buildings. Energy Engineering, 119 (4). 1299 -1325. ISSN 0199-8595. (Published)

John Paul, Nadakkal and Kadirgama, Kumaran and Samykano, Mahendran (2022) Thermophysical characterization of paraffin/palmitic acid binary eutectic composite for thermal energy harvesting. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 66.. (Published)

Jolius, Gimbun and Ramakrishnan, Ramprasath and Ramakrishnan, Praveen and Ranganathan, Balu (2022) Needleless Electrospun Nanofibers for Drug Delivery Systems. In: Electrospun Nanofibers from Bioresources for High-Performance Applications. CRC Press, 6000 Broken Sound Pkwy NW, Boca Raton, FL 33487, USA, pp. 87-104. ISBN 9781003225577

Jose, Rajan and Al-Douri, Yarub (2022) Introduction to quantum dots. In: Graphene, Nanotubes and Quantum Dots-Based Nanotechnology: Fundamentals and Application. Woodhead Publishing Series in Electronic and Optical Materials . Elsevier, pp. 579-599. ISBN 978-0-323-85457-3

Joseph, Brennen Sta Maria and Hafizoah, Kassim and Ruhil Amal, Azmuddin (2022) The utilisation of digital tools on ESL learners’ creativity: A systematic literature review. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 131.. (Published)

Joyce Cynthia, Jalani and Zatul Iffah, Mohd Arshad (2022) PLA Degradation and PLA-Degrading Bacteria: A Mini-Review Journal: Key Engineering Materials. Key Engineering Materials, 932. pp. 103-110. ISSN 1662-9795. (Published)

Juani Munir, Abu Bakar (2022) Letak kewajipan Yang di-Pertuan Agong lindungi Bahasa Kebangsaan. Utusan Malaysia .

Jui, Julakha Jahan and Mohd Ashraf, Ahmad and Muhammad Ikram, Mohd Rashid (2022) Metaheuristics algorithms to identify nonlinear Hammerstein model: A decade survey. Bulletin of Electrical Engineering and Informatics, 11 (1). pp. 454-465. ISSN 2089-3191. (Published)

Jui, Julakha Jahan and Molla, M. M.Imran and Alam, Mohammad Khurshed and Ferdowsi, Asma (2022) Prostate cancer prediction using feedforward neural network trained with particle swarm optimizer. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 395-405., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4 (Published)

Juliza, Mohamad Arif (2022) Fuzzy analytical hierarchy process based risk assessment for malware detection in android mobile system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Faizal, Ab Razak).

Junita, Mohd Said and Faiz, Mohd Turan (2022) Optimising MIG weld bead geometry of hot rolled carbon steel using response surface method. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 179-188.. ISBN 978-981-19-2890-1 (Published)

Jusoo, S. H. and Mohamad, Mohd Sham and Sulaiman, Sahimel Azwal and Faisal, . (2022) Some analysis on conjugacy search problem for Diffie-Hellman protocol. Data Analytics and Applied Mathematics (DAAM), 3 (2). pp. 13-17. ISSN 2773-4854. (Published)

K

K Mohana, Priya (2022) Sukarelawan KILAU UMP edar juadah sahur. Berita Harian .

K., Balakrishnan and N.F., Buang and Mohammad Adam, Adman (2022) Factors affecting construction productivity: comparative study between worker's nationality. UMP Research Series: Construction Engineering and Management, 1 (1). pp. 20-30. ISSN 978-967-2831-41-9. (Published)

K., Foo and Y. Y., Liang and P. S., Goh and A. L., Ahmad and D. K., Wang and D. F., Fletcher (2022) Comparison of analytical film theory and a numerical model for predicting concentration polarisation in membrane gas separation. Chemical Engineering Research and Design. ISSN 0263-8762. (Published)

K. A., Masri and Nur Syafiqah Shamimi, Mohd Zali and Putra Jaya, Ramadhansyah and Mazlan, Abu Seman and Mohd Rosli, Mohd Hasan (2022) The influence of nano titanium as bitumen modifier in stone mastic asphalt. Advances in Materials Science and Engineering, 2022 (4021618). pp. 1-19. ISSN 1687-8442. (Published)

K. T., Lee and D., Youventharan (2022) Shear Wave Velocity Measurements in Tropical Peat Using In-house Device. Construction, 2 (1). pp. 22-30. ISSN 2785-8731. (Published)

Kabbashi, Nassereldeen Ahmed and Firdaus, Abd-Wahab and Bahaaddin, Warqaa Muhammed and Musa, Lubna Muhamed and Nour, Abdurahman Hamid and Qudsieh, Isam Yasseen (2022) Potential of low carbon nanotubes dosage on chromium removal from water. IIUM Engineering Journal, 23 (2). pp. 10-19. ISSN 1511-788X. (Published)

Kader, Md. Abdul and Zamli, Kamal Z. and Alkazemi, Basem Yousef (2022) An experimental study of a fuzzy adaptive emperor penguin optimizer for global optimization problem. IEEE Access, 10. 116344 -116374. ISSN 2169-3536. (In Press / Online First) (In Press / Online First)

Kader, Md. Ashraful and Kafi, A. K. M. and Azmi, Nina Suhaity (2022) Applications of nanomaterials for biosensor fabrication based on redox enzyme and protein: A mini-review. Current Science and Technology (CST), 2 (2). pp. 20-28. ISSN 2785-8804. (Published)

Kai, Gavin Lim Jiann and Ahmad Fakhri, Ab Nasir and Anwar, P. P. Abdul Majeed and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Li, Lim Thai (2022) The classification of impact signal of 6 DOF cobot by means of machine learning model. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. 553- 560., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Kai, Gavin Lim Jiann and Ahmad Fakhri, Ab. Nasir and P.P. Abdul Majeed, Anwar and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Li, Lim Thai (2022) The classification of impact signal of 6 DOF cobot by means of machine learning model. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021through 20 September 2021 , Gambang. pp. 553-560., 900. ISSN 1876-1100 ISBN 978-981192094-3 (Published)

Kai, Gavin Lim Jiann and Mahendra Kumar, Jothi Letchumy and Rashid, Mamunur and Rabiu Muazu, Musa and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Abdul Majeed, Anwar P. P. (2022) The classification of blinking: an evaluation of significant time-domain features. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. 999 -1004., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Kalbana, Perimbanayagam and Muhammad, Aizzuddin (2022) Appreciate fallen heroes who fought communists, youth told. New Straits Times .

Kalidasan, B. and Pandey, Adarsh Kumar and Saidur, Rahman Md and Samykano, Mahendran and Tyagi, Vineet Veer (2022) Optical absorptivity and thermal conductivity analysis of silver nanoparticle dispersed salt hydrate PCM. In: 2022 IEEE International Conference on Power and Energy : Advancement in Power and Energy Systems towards Sustainable and Resilient Energy Supply, PECon 2022Pages 203 - 2082022; 9th IEEE International Conference on Power and Energy, PECon 2022 , 5 - 6 December 2022 , Langkawi, Kedah. pp. 328-332. (185592). ISBN 978-166540990-2 (Published)

Kalidasan, B. and Pandey, Adarsh Kumar and Saidur, Rahman Md and Yadav, Aman and Samykano, Mahendran and Tyagi, Vineet Veer (2022) Graphene–silver hybrid nanoparticle based organic phase change materials for enhanced thermal energy storage. Sustainability (Switzerland), 14 (13240). pp. 1-16. ISSN 2071-1050. (Published)

Kamal Z., Zamli and Kader, Md. Abdul (2022) Solving multi-task optimization problems using the sine cosine algorithm. In: ACM International Conference Proceeding Series; 11th International Conference on Software and Computer Applications (ICSCA 2022) , 24 - 26 February 2022 , Melaka, Malaysia. pp. 219-224.. ISBN 978-1-4503-8577-0 (Published)

Kamaruddeen, Ahmed M. and Rui, Ling Siao and Lee, Khai Loon and Alzoubi, Haitham M. and Alshurideh, Mohammad (2022) Determinants of Emerging Technology Adoption For Safety Among Construction Businesses. Academy of Strategic Management Journal, 21 (Special Issue 3). pp. 1-20. ISSN 1939-6104. (Published)

Kamarul Hawari, Ghazali and Ismail, . (2022) The automatic focus segmentation of multi-focus image fusion. Bulletin of the Polish Academy of Sciences: Technical Sciences, 70 (1). pp. 1-8. ISSN 0239-7528. (Published)

Kamarulzaman, Mahmad Khairai (2022) The study of stress and work-life balance program at bi technologies corporation sdn bhd on cognitive ergonomics functions to improve work performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nubli, Abdul Wahab).

Kamaruzzaman, Zetty Ain (2022) Customer profiling and segmentation of starbucks Malaysia: Empirical investigation during CMCO 2.0. In: AIP Conference Proceedings; 5th Innovation and Analytics Conference and Exhibition, IACE 2021 , 23 - 24 November 2021 , Kedah, Virtual. pp. 1-8., 3472 (050014). ISSN 0094-243X ISBN 978-073544387-7 (Published)

Kamil, Samar and Siti Norul Huda, Sheikh Abdullah and Ahmad Firdaus, Zainal Abidin and Usman, Opeyemi Lateef (2022) The rise of ransomware: a review of attacks, detection techniques, and future challenges. In: 2022 International Conference on Business Analytics for Technology and Security, ICBATS 2022 , 16-17 February 2022 , Dubai. pp. 1-7. (179001). ISBN 978-166540920-9 (Published)

Kamil Khalili, Haji Abdullah and Nurizzatul Atikha, Rahmat and Khairun Adhani, Khairunizam (2022) Flow pattern around traditional malay house using enhanced smoke wire technique in a boundary layer wind tunnel. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 49-56., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)

Kamleshvari, Panerselvan (2022) Design And Analysis Of Substrate Integrated Waveguide Antenna Performance For Material Characterization (Teflon). College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Kanagesan, Karthiani and Rahmath, Abdulla and Eryati, Derman and Mohd Khalizan, Sabullah and Govindan, Natanamurugaraj and Gansau, Jualang Azlan (2022) A sustainable approach to green algal bioplastics production from brown seaweeds of Sabah, Malaysia. Journal of King Saud University - Science, 34 (102268). pp. 1-7. ISSN 1018-3647. (Published)

Kangxing, Dong and Swan, Chiam Kee and Hafizoah, Kassim (2022) An Investigation of ESL learners’ Affective Attributes Toward Online Reading. In: 3rd International Conference on Language Learning & Teaching (ICOLLT2021) , 24-25 August 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-8.. (Published)

Kangxing, Dong and Swan, Chiam Kee and Hafizoah, Kassim (2022) An Investigation on Online Metacognitive Reading Strategies Used by Malaysian Engineering Undergraduates. In: Spearheading Excellence: in Humanities, Social Sciences and Business Management Research. Penerbit UMP, Kuantan, Pahang, pp. 37-52. ISBN 978-967-2831-36-5

Kaniz, Farhana and Kumaran, Kadirgama and Mahamude, Abu Shadate Faisal and Mushfika, Tasnim Mica (2022) Energy consumption, environmental impact, and implementation of renewable energy resources in global textile industries: an overview towards circularity and sustainability. Materials Circular Economy, 4 (15). ISSN 2524-8154. (Published)

Kanna, Vitee (2022) Development of smart system for agriculture. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Kannapiran, Sushma and Vitta, Samhita and Ranganathan, Balu and Rajagopal, Vidhya and Jolius, Gimbun and Ballamurugan, Anbalagan (2022) PEG-PLA Nanoformulation for Breast Cancer Therapy. Trends in Biomaterials and Artificial Organs, 36 (S1). pp. 76-82. ISSN 0971-1198. (Published)

Kao, Fangchen and Ting, Irene Wei Kiong and Chou, Hanchung and Liu, Yisung (2022) Exploring the Influence of corporate social responsibility on efficiency : An extended dynamic data envelopment analysis of the global airline industry. Sustainability (Switzerland), 14 (12712). pp. 1-21. ISSN 2071-1050. (Published)

Karim Khan, Md Fazlul and Rashid, Shah Samiur and Aizi Nor Mazila, Ramli and Kabir, Muhammad Nomani and Hasan Maziz, Mohammad Nazmul (2022) The characterisation of diarrhoeagenic verotoxin producing non-o157 coli among young children in Kuantan, Malaysia. Malaysian Journal of Medical Sciences, 29 (2). pp. 55-68. ISSN 1394-195X. (Published)

Karthiani, Kanagesan (2022) Cultivation of microalgae nannochloropsis sp. In palm oil mill effluent for biodiesel production. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Natanamurugaraj, Govindan).

Karthick Murugan, Palanisamy and Gaanty Pragas, Maniam and Mohd Hasbi, Ab. Rahim and Natanamurugaraj, Govindan (2022) Palm oil mill effluent for lipid production by the diatom thalassiosira pseudonana. Fermentation, 8 (1). pp. 1-16. ISSN 2311-5637. (Published)

Karthick Murugan, Palanisamy and Mohd Hasbi, Ab. Rahim and Natanamurugaraj, Govindan and Rameshprabu, Ramaraj and Palaniselvam, Kuppusamy and Gaanty Pragas, Maniam (2022) Effect of blue light intensity and photoperiods on the growth of diatom Thalassiosira pseudonana. Bioresource Technology Reports, 19 (101152). pp. 1-6. ISSN 2589-014X. (Published)

Karuniawati, Hidayah and Sari, Nila and Hossain, Md. Sanower and Wan Ismahanisa, Ismail and Haq, Aniq Hudiyah Bil and Yulianti, Tri and Taufik, Taufik and Sudarsono, Gardhika Rizky (2022) Assessment of mental health and quality of life status of undergraduate students in indonesia during covid-19 outbreak : A cross-sectional study. International Journal of Environmental Research and Public Health, 19 (12011). pp. 1-14. ISSN 1661-7827. (Published)

Kasim, Nur Muneerah and Fauzi, M. A. and Wider, Walton and Yusuf, Muhammad Fakhrul (2022) Understanding social media usage at work from the perspective of social capital theory. Administrative Sciences, 12 (4). pp. 1-21. ISSN 2076-3387. (Published)

Kasim, Nur Muneerah and Fauzi, M. A. and Yusuf, Muhammad Fakhrul and Wider, Walton (2022) The effect of whatsapp usage on employee innovative performance at the workplace: Perspective from the stressor–strain–outcome model. Behavioral Sciences, 12 (11). pp. 1-19. ISSN 2076-328X. (Published)

Kassim, Muhammad Hatta and Hussain, Suhaidah and Abdul Wahab, Norwazli (2022) The effectiveness of border crossing management between Malaysia & Thailand with reference to Bukit Kayu Hitam – Sadao and Padang Besar – Padangbasa. Journal of Governance and Integrity (JGI), 5 (3). 336 -359. ISSN 2600-7479 (Print); 2600-786X (Online). (Published)

Kasturi, Sivabalan and Zuraina, Ali (2022) The Effectiveness of WhatsApp in Vocabulary Learning. Innovative Teaching and Learning Journal. ISSN 2289-2370. (In Press / Online First) (In Press / Online First)

Kasturi, Sivabalan and Zuraina, Ali (2022) Effects of WhatsApp as Vocabulary Instructional Tool for Distance Learning among Tertiary Students. Journal of Contemporary Social Science and Education Studies (JOCSSES). ISSN 2785-8774. (In Press / Online First) (In Press / Online First)

Kavindran, Suresh (2022) Modeling of cupping suction system based on system identification method. College of Engineering, Universiti Malaysia Pahang.

Kavinmugil, Kalaiselvan (2022) Degassing effect on nickel aluminum bronze alloy castings. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Maarof, Mohd Rashidi).

Kee, T. K. and Cheok, C. J. and M. A. Amzar, Kamarudin and Saffuan, Wan Ahmad (2022) Structure vulnerability and risk analysis of 3-legged offshore structure. In: Engineering Technology International Conference (ETIC 2022) , 7 - 8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 1-8.. ISBN 978-1-83953-782-0 (Published)

Kelvin Wong, Khai Voon and Ahmad Mahfuz, Gazali and Normaiza, Zamri and Kamal, Rullah and Mohd Fadhlizil Fasihi, Mohd Aluwi (2022) A Mini-Review on the Insight into the Effect of Natural and Synthetic α,β-Unsaturated Carbonyl-Containing Compounds on PI3K/AKT/mTOR Signaling Pathways to Treat Breast Cancer. Journal of Computational Biophysics and Chemistry. pp. 1-16. ISSN 2737-4173. (Published)

Kesavarma, Seluraju (2022) Investigation of mechanical behavior and properties prediction modelling of copper-filled filament for 3d printing. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Khairatun Najwa, Mohd Amin (2022) 13 - Enhanced thermal stability of cellulose nanocrystals for processing polymer nanocomposites at a high temperature. In: Industrial Applications of Nanocellulose and Its Nanocomposites. A volume in Woodhead Publishing Series in Composites Science and Engineering . Elsevier, New Delhi, India, pp. 327-335. ISBN 978-0-323-89909-3 (Printed); 978-0-323-89917-8 (Online)

Khairatun Najwa, Mohd Amin and Chaleat, Celine and Edwards, Grant and Martin, Darren J. and Pratheep Kumar, Annamalai (2022) A cleaner processing approach for cellulose reinforced thermoplastic polyurethane nanocomposites. Polymer Engineering and Science, 62 (3). 949 -961. ISSN 0032-3888. (Published)

Khairatun Najwa, Mohd Amin and Hosseinmardi, Alireza and Martin, Darren J. and Annamalai, Pratheep K. (2022) A mixed acid methodology to produce thermally stable cellulose nanocrystal at high yield using phosphoric acid. Journal of Bioresources and Bioproducts, 7 (2). pp. 99-108. ISSN 2369-9698. (Published)

Khairil Anuar, Abdul Hamid and Ezrin Hani, Sukadarin and Widia, Mirta (2022) Reliability Analysis of Covid-19 Risk Management System in Malaysia Higher Learning Institution. In: Proceedings of the 3rd Asia Pacific International Conference on Industrial Engineering and Operations Management. 3rd Asia Pacific International Conference on Industrial Engineering and Operations Management , September 13-15, 2022 , Johor Bahru, Malaysia. pp. 1-12.. ISSN 2169-8767 ISBN 978-1-7923-9162-0 (Published)

Khairil Azman, Masri and Nur Hamizah, Katini and Ahmad Kamil, Arshad and Shahnewaz, Shoaib and Rashida, Ferdaus (2022) Microstructure analysis of porous asphalt incorporating kenaf fiber in the pavement. In: Materials Today: Proceedings, International Symposium of Reaction Engineering, Catalysis & Sustainable Energy (RECaSE 2021) , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1191-1195., 57 (3). ISSN 2214-7853 (Published)

Khairul, Mohd Arshad and Muhamad, Mat Noor and Asrulnizam, Abd Manaf and Kawarada, Hiroshi and Falina, Shaili and Mohd, Syamsul (2022) A comparative modelling study of new robust packaging technology 1mm2 VCSEL packages and their mechanical stress properties. Micromachines, 13 (1513). pp. 1-15. ISSN 2072-666X. (Published)

Khairul, Mohd Arshad and Muhamad, Mat Noor and Asrulnizam, Abd Manaf and Kawarada, Hiroshi and Shaili Falina, Mohd Sukri and Mohd Nasyriq, Syamsul (2022) A comparative modelling study of new robust packaging technology 1 mm2 VCSEL packages and their mechanical stress properties. Micromachines, 13 (1513). pp. 1-15. ISSN 2072-666X. (Published)

Khairul Ikhwan, Anuar (2022) Biomethane Production From Potato And Pseudostem Banana Waste By Anaerobic Digestion. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Khairul Salleh, Abdul Basit (2022) Exploring the influence of service quality (sq) on patient satisfaction (ps) : a case study of universiti malaysia pahang health centre (umphc). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Suhaidah, Hussain).

Khairulafizal, Sultan Ali and Mohd Nadzeri, Omar and Nasrul Hadi, Johari and Mohd Hasnun Ariff, Hassan (2022) A Study on the Wear Resistance and Lubrication Properties of Mixed Engine Oils. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 95-107.. ISSN 2195-4356 ISBN 978-981-19-4425-3 (Published)

Khairulnadzmi, Jamaluddin and Sharifah Rafidah, Wan Alwi and Zainuddin, Abdul Manan and Khaidzir, Hamzah and Klemeš, Jiří Jaromír and Roziah, Zailan (2022) Optimal nuclear trigeneration system considering life cycle costing. Journal of Cleaner Production, 370 (133399). pp. 1-20. ISSN 0959-6526. (Published)

Khairunisa, Muthusamy and Nur Farah Aziera, Jamaludin and Adibah Zulaikha, Zainuddin and Mohd Faizal, Md Jaafar and Kirgiz, M. S. (2022) Effect of spent garnet waste as partial fine aggregate replacement on properties of high strength lightweight aggregate concrete. In: Key Engineering Materials; 5th World Sustainable Construction Conference, WSCC 2021 , 15 - 16 October 2021 , Virtual, Online. pp. 17-23., 912. ISSN 1013-9826 (print); 1662-9795 (online) ISBN 978-303571792-1 (Published)

Khairunisa, Muthusamy and Nur Farah Aziera, Jamaludin and Mohd Faizal, Md Jaafar and Ahmed Mokhtar Albshir, Budiea and Mohamed A., Ismail (2022) Compressive Strength of Palm Oil Lightweight Aggregate Concrete Containing Industrial Waste as Partial Sand Replacement. Materials Science Forum, 1056. pp. 55-60. ISSN 1662-9752. (Published)

Khairunisa, Muthusamy and Saffuan, Wan Ahmad and Mohd Hanafi, Hashim and Nabilla, Mohamad and Kırgız, Mehmet Serkan and Muhammad Aimran Amzar, Kamarudin and Ravindran, Gobinath (2022) Sulphate resistance of lightweight aggregate concrete comprising sieved palm oil fuel ash as fine aggregate replacement. In: Materials Today: Proceedings. 2022 International Conference on Recent Advances in Engineering Materials. , 2022 . pp. 2536-2540., 66. ISSN 2214-7853 (Published)

Khalid, N. S. and Rahim, M. R. and Hassan, M. F. (2022) Sensitivity identification of low-frequency cantilever fibre bragg grating accelerometer using cascade-forward backpropagation neural network. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9419-9432. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Khamisa, Abdul Hamid and Wan Azmi, Wan Hamzah and Mohd Yusof, Taib and Mohd Farid, Ismail and Anwar Ilmar, Ramadhan (2022) Rheological properties of TiO2/POE nanolubricant for automotive air conditioning system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (1). pp. 10-22. ISSN 2289-7879. (Published)

Khan, Burhan Ul Islam and Anwar, Farhat and Farah Diyana, Abdul Rahman and Olanrewaju, Rashidah Funke and Goh, Khang Wen and Zuriati, Janin and Rahman, Md Arafatur (2022) SGM : Strategic game model for resisting node misbehaviour in IoT-cloud ecosystem. Information (Switzerland), 13 (544). pp. 1-19. ISSN 2078-2489. (Published)

Khan, Md. Nafiul Alam and Miah, M. Saef Ullah and Shahjalal, Md. and Sarwar, Talha and Rokon, Md. Shahariar (2022) Predicting young imposter syndrome using ensemble learning. Complexity, 2022 (8306473). pp. 1-10. ISSN 1076-2787. (Published)

Khan, Nida and K., Sudhakar and Mamat, Rizalman (2022) Thermogravimetric Analysis of Marine Macroalgae Waste Biomass as Bio-Renewable Fuel. Journal of Chemistry, 2022. pp. 1-9. ISSN 2090-9071. (Published)

Khan, Sanjay and Sudhakar, K. and Mohd Hazwan, Yusof (2022) Techno-Environmental Analysis of Facade Integrated Photovoltaics and Electric Vehicle Charging for University Building. Mathematical Problems in Engineering, 2022 (7186009). ISSN 1024-123X (print); 1563-5147 (online). (Published)

Khilji, Irshad Ahamad and Siti Nadiah, Mohd Saffe and Pathak, Sunil and Chilakamarry, Chaitanya Reddy and Amiril Sahab, Abdul Sani and Reddy, Venugopal Jayarama (2022) Facile manufacture of oxide-free Cu particles coated with oleic acid by electrical discharge machining. Micromachines, 13 (6). pp. 1-10. ISSN 2072-666X. (Published)

Khilji, Irshad Ahamad and Siti Nadiah, Mohd Saffe and Pathak, Sunil and Ţălu, Ştefan and Kulesza, Slawomir and Bramowicz, Miroslaw and Venugopal Jayarama, Reddy (2022) Titanium alloy particles formation in electrical discharge machining and fractal analysis. The Journal of The Minerals, Metals & Materials Society (TMS), 74. pp. 448-455. ISSN 1543-1851. (Published)

Khir, Hazim and Pandey, Adarsh Kumar and Saidur, Rahman Md and Muhammad, Shakeel Ahmad and Nasrudin, Abd Rahim and Dewika, M. and Samykano, Mahendran (2022) Recent advancements and challenges in flexible low temperature dye sensitised solar cells. Sustainable Energy Technologies and Assessments, 53 (102745). pp. 1-23. ISSN 2213-1388. (Published)

Khong, S. C. and Yee, J. J. and Doh, S. I. and Chin, S. C. (2022) A review of agro-potential waste as a constituent in railway sleepers. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103238). p. 1. ISSN 1474-7065. (Published)

Kiethson, Branden Adems and Mohd Khairuddin, Ismail and Anwar P. P., Abdul Majeed and Mohd Razman, Mohd Azraai and Abdullah, Muhammad Amirul and Mohd Isa, Wan Hasbullah (2022) Artificial intelligence approach for fire monitoring and warning system design. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 58-63. ISSN 2637-0883. (Published)

King, Sze Soon and Rahimi, A. Rahman and Muhammad Ashraf, Fauzi and Ahmad Tarmizi, Haron (2022) Critical analysis of pandemic impact on AEC organizations: The covid-19 case. Journal of Engineering, Design and Technology, 20 (1). pp. 358-383. ISSN 1726-0531. (Published)

Kiriyadhatshini, Gunaratnam and Azma, Abdullah and Rohani, Abu Bakar and Hujainah, Fadhl Mohammed Omar (2022) Hazard analysis techniques, methods and approaches: A review. International Journal of Advanced Research in Engineering Innovation (IJAREI), 4 (1). pp. 23-34. ISSN 2682-8499. (Published)

Kirpichnikova, I.M. and Sudhakar, K. and Makhsumov, I.B. and Martyanov, A.S. and ShanmugaPriya, S. (2022) Thermal model of a photovoltaic module with heat-protective film. Case Studies in Thermal Engineering, 30. pp. 1-10. ISSN 2214-157X. (Published)

Kishore, D. J. Krishna and Mohamed, M. R. and Jewaliddin, S. K. and Peddakapu, K. and Srinivasarao, P. (2022) Cost regulation and power quality enhancement for PV-wind-battery system using grasshopper optimisation approach. International Journal of Ambient Energy, 43 (1). 8763 -8774. ISSN 0143-0750 (Print); 2162-8246 (Online). (Published)

Kishore, D. J. Krishna and Mohamed, M. R. and Sudhakar, K. and Peddakapu, K. (2022) Grey wolf optimization and differential evolution-based maximum power point tracking controller for photovoltaic systems under partial shading conditions. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44 (3). 6286 -6302. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Koh, Qing Zhe (2022) Home Fitness Mobile Application. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Koh, Yeong Cherng (2022) Integrated Smart Irrigation System For Okra Plant. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Koondhar, Mohsin Ali and Laghari, Imtiaz Ali and Asfaw, Belay Million and Reji Kumar, Rajamony and Lenin, A. Haiter (2022) Experimental and simulation-based comparative analysis of different parameters of PV module. Scientific African, 16 (e01197). pp. 1-16. ISSN 2468-2276. (Published)

Krijah, Vatumalai (2022) Performance Analysis Of Dynamic Control In Dual Active Bridge Dc-Dc Converter. College of Engineering, Universiti Malaysia Pahang.

Krishna Kishore, Dokala Janandra and Mohd Rusllim, Mohamed and Sudhakar, Kumarasamy and Peddakapu, kurukuri and D., Anantha koteswara Rao (2022) A hybrid PEO based maximum power point tracking controller for pv system under partial shading conditions. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 63.. (Published)

Krishnan, S. and Nasrullah, M. and S., Mohamad (2022) Effect of pellet size and adhesive ratio on the production of kenaf pellet as a fossil fuel. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 8 (1). pp. 14-17. ISSN 0126-8139. (Published)

Krishnan, Santhana and Mohd, Nasrullah and Kamyab, Hesam and Noor, Suzana and Mimi Sakinah, Abdul Munaim and Zularisam, Abdul Wahid and Ali, Ismat Hassan and Salehi, Reza and Chaiprapat, Sumate S. (2022) Fouling characteristics and cleaning approach of ultrafiltration membrane during xylose reductase separation. Bioprocess and Biosystems Engineering, 45 (7). pp. 1125-1136. ISSN 1615-7591. (Published)

Kritharan, Rajandran (2022) Microcontroller-Based Spectrum Analyzer System. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Kumar, Harish and Soh, Ping Jack and Mohd Arfian, Ismail (2022) Big data streaming platforms : A review. Iraqi Journal for Computer Science and Mathematics, 3 (2). pp. 95-100. ISSN 2788-7421. (Published)

Kumar Awasthi, Mukesh Kumar and Nur Izyan, Wan Azelee and Aizi Nor Mazila, Ramli and Siti Aishah, Rashid and Nor Hasmaliana, Abdul Manas and Dailin, Daniel Joe and Rosli, Md Illias and Rajagopal, Rajinikanth and Chang, Soon Woong and Zhang, Zeng Qiang and Ravindran, Balsubramani (2022) Microbial biotechnology approaches for conversion of pineapple waste in to emerging source of healthy food for sustainable environment. International Journal of Food Microbiology, 373 (109714). pp. 1-14. ISSN 0168-1605. (Published)

Kumar R, Reji and A.K., Pandey and Samykano, Mahendran and Nath Mishra, Yogeshwar and R.V. Mohan, R.V. and Sharma, Kamal and Tyagi, V.V. (2022) Effect of surfactant on functionalized multi-walled carbon nano tubes enhanced salt hydrate phase change material. Journal of Energy Storage, 55 (105654). pp. 1-15. ISSN 2352-152X. (Published)

Kumaran, Vikniswari Vija and Haron, Nazatul Faizah and Ridzuan, Abdul Rahim and Saudi, Nur Surayya and Sapuan, Noraina Mazuin (2022) Evaluating climate change towards sustainable development. In: Handbook of Energy and Environmental Security. Academic Press, Elsevier, United Kingdom, pp. 377-397. ISBN 978-0-12-824084-7

Kumaresan, Rajan and Mahendran, Samykano and Kumaran, Kadirgama and Wan Sharuzi, Wan Harun and Rahman, Md. Mustafizur (2022) Fused deposition modeling: process, materials, parameters, properties, and applications. The International Journal of Advanced Manufacturing Technology, 120. pp. 1531-1570. ISSN 1433-3015 (Online); 0268-3768 (Printed). (Published)

Kwan, Ze Zhen and Mohd Khairuddin, Ismail and Mohd Razman, Mohd Azraai and Anwar, P. P. Abdul Majeed and Mohd Isa, Wan Hasbullah (2022) Design a precision motion control of an upper limb robotic arm. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 6-15. ISSN 2637-0883. (Published)

Kweh, Qian Long and Ting, Irene Wei Kiong and Lu, Wen-Min and Hanh, Le Thi My (2022) Nonlinearity in the relationship between intellectual capital and corporate performance: Evidence from Vietnamese listed companies. Journal Of Intellectual Capital, 23 (6). pp. 1246-1275. ISSN 1469-1930. (Published)

L

L., Sandanamsamy and W. S. W., Harun and I., Ishak and F. R. M., Romlay and K., Kadirgama and D., Ramasamy and S. R. A., Idris and F., Tsumori (2022) A comprehensive review on fused deposition modelling of polylactic acid. Progress in Additive Manufacturing. pp. 1-25. ISSN 2363-9520. (Published)

Laghari, Imtiaz Ali and M., Samykano and A.K., Pandey and K., Kadirgama and Mishra, Yogeshwar Nath (2022) Binary composite (TiO2-Gr) based nano-enhanced organic phase change material: Effect on thermophysical properties. Journal of Energy Storage, 51 (104526). (Published)

Lai, Chong Jin (2022) System Identification And Control Of Automatic Car Pedal Pressing System For Low-Speed Driving In A Road Traffic Delay. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Laila Amera, Aziz and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and Faye, Ibrahim (2022) Flow of viscoelastic fluid with microrotation at a boundary layer flow of a horizontal circular cylinder. CFD Letters, 14 (12). pp. 66-74. ISSN 2180-1363. (Published)

Laila Amera, Aziz and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and Faye, Ibrahim (2022) Flow of viscoelastic fluid with microrotation at a boundary layer flow of a horizontal circular cylinder. CFD Letters, 14 (12). pp. 66-74. ISSN 2180-1363. (Published)

Laila Fadhillah, Ulta Delestri and Foo, Ngai Kok and Al Abed, Amr and Dokos, Socrates and Mohd Jamil, Mohamed Mokhtarudin and Bressloff, Neil W. and Azam, Ahmad Bakir (2022) Computational analysis of the effect of cardiac motion on left main coronary artery hemodynamics. In: Computing in Cardiology. Computing in Cardiology; 2022 Computing in Cardiology, CinC 2022 , 4 - 7 September 2022 , Tampere, Finland. pp. 1-4., 49 (September). ISSN 2325-8861 ISBN 979-835030097-0 (Published)

Laili, Zulkepeli (2022) Kolaborasi UMP, MNR dan UMW dalam penyelidikan minyak gris gred makanan. UMP News .

Laili, Zulkepeli (2022) Optimization of industrial matching grant application system in ump : a value stream mapping approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Gusman, Nawanir).

Laili, Zulkepeli (2022) UMP, MNR and UMW collaboration in food grade grease oil research. UMP News .

Lam, Yan Shin (2022) House interior design with Augmented Reality technology. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lau, Kuen Yao and Noor Zirwatul Ahlam, Naharuddin and Abas, A. F. and Alresheedi, Mohammed Thamer and N. H., Zainol Abidin and Mohd Adzir, Mahdi (2022) Gold-nanoparticles microfiber saturable absorber for mode-locked erbium-doped fiber laser. In: 2022 IEEE 9th International Conference on Photonics, ICP 2022 , 8-10 August 2022 , Kuala Lumpur. pp. 8-9. (183601). ISBN 978-166542766-1 (Published)

Laupa, Junus (2022) Jawatan naib canselor masih kosong di empat IPTA. Utusan Malaysia .

Laupa, Junus (2022) Penyelidik UMP hasilkan inovasi sistem Smart Aqua jamin kualiti air ternakan udang kara berkualiti. Jurnal.my .

Laupa, Junus (2022) SCAV bas pintar tanpa pemandu inovasi terbaharu UMP. Jurnal.my .

Lebcir, Mohamed and Suryanti, Awang and Benziane, Ali (2022) Robust blind watermarking approach against the compression for fingerprint image using 2D-DCT. Multimedia Tools and Applications, 81. pp. 20561-20583. ISSN 1380-7501(print); 1573-7721(online). (Published)

Lee, Chia Kuang (2022) Professional Certifications Propelling the Project Economy. UMP News .

Lee, Chia Kuang and Chen, Min Si and Mohd Zainudin, Nurhaizan and Fauzi, M. A. and Toh, Tien Choon (2022) Transformation of industrial revolution 4.0 in the construction industry: Understanding drivers & barriers with dematel algorithm. International Journal of Industrial Management (IJIM), 16 (1). pp. 31-43. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Lee, Chia Kuang and Yiu, Tak Wing and Cheung, Sai On (2022) Intervening decision-making in using alternative dispute resolutions: A parsimonious intervention model. In: Construction Dispute Research Expanded. Springer Tracts in Civil Engineering . Springer Nature, Switzerland AG, pp. 369-398. ISBN 978-3-030-80256-1

Lee, Helen May Shian and Syarifah Nur Hasanah, Syed Kamarudin and Mohd Zairulnizam, Mohd Zawawi (2022) Experimental and Numerical Simulation of Hot Embossing for Fabrication of Glass Microlens Array. In: Innovative Manufacturing, Mechatronics & Materials Forum (iM3F 2022) , 20 July 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 1-4.. ISBN 978-1-83953-781-3 (Published)

Lee, Jie Ying and Ahmad Rosli, Abdul Manaf (2022) Investigation of optimum EDM die sinking parameters in micro dimple machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (1). pp. 58-65. ISSN 2636-9575. (Published)

Lee, Khai Loon (2022) Boosting performance: Through supply chain capabilities and technology adoption. UMP Publisher, Kuantan. ISBN 9789672831495

Lee, Khai Loon and Lim, Cean Peing (2022) The role of big data and predictive analytics capabilities in supply chain management: The perspective of Malaysia manufacturing firm. In: 12th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2021) , 16-18 November 2021 , Melaka, Malaysia. pp. 295-296.. (Published)

Lee, Khai Loon and Nurul Ain Najiha, Azmi and Hanaysha, Jalal Rajeh and Alzoubi, Haitham M. and Alshurideh, Muhammad Turki (2022) The effect of digital supply chain on organizational performance: An empirical study in Malaysia manufacturing industry. Uncertain Supply Chain Management, 10 (2). pp. 495-510. ISSN 2291-6830 (Online). (Published)

Lee, Khai Loon and Puteri Nurhazira, Romzi and Hanaysha, Jalal Rajeh and Alzoubi, Haitham M. and Alshurideh, Muhammad (2022) Investigating the impact of benefits and challenges of IOT adoption on supply chain performance and organizational performance: An empirical study in Malaysia. Uncertain Supply Chain Management, 10 (2). pp. 537-550. ISSN 2291-6830 (Online). (Published)

Lee, Khai Loon and Shaharud-din, Afiq Muqri (2022) Procurement 4.0 and organizational performance in the Malaysian construction industry. International Journal of Service Science, Management, Engineering, and Technology (IJSSMET), 13 (1). pp. 1-22. ISSN 1947-959X. (Published)

Lee, Yi Ming (2022) Cloud web server for IoT smart laboratory system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lee, Zhan Sheng (2022) Catalytic oxidative hydrothermal treatment of palm oil mill effluent over CuO/Al2O3 and Ce-CuO/Al2O3 catalysts. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Chin, Sim Yee).

Lee, Zheng Ping (2022) A novel decision support tool for assessing the suitability of design-build method for civil construction projects in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahimi, Abdul Rahman).

Lee, Zheng Ping (2022) A novel decision support tool for assessing the suitability of designbuild method for civil construction projects in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahimi, Abdul Rahman).

Lee, Zheng Ping and Abdul Rahimi, Abdul Rahman and Doh, Shu Ing (2022) Application of decision support tool in design-build projects: A quasi-experiment with novice decision makers. Built Environment Project and Asset Management, ahead-of-pri. pp. 1-19. ISSN 2044-124X. (Published)

Lee May Shian, Helen and Aina Aishah, Maharon and Raja Murfiqah, Raja Mohd Fouzy and Norfazilasari, Yasman and Mohd Zairulnizam, Mohd Zawawi (2022) Fabrication of glass microlens array using laser-assisted contactless hot embossing. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 86.. (Published)

Lestari, Puji Tri and Fernando, Yudi and Ikhsan, Ridho Bramulya and Wahyuni-Td, Ika Sari and Prasarry, Yudhita Valen and Mergeresa, Fineke (2022) A survey on electronic dialogue, risk assessment, customer access, and customers relationship lifetime. In: Proceedings of 2022 International Conference on Information Management and Technology, ICIMTech 2022; 7th International Conference on Information Management and Technology, ICIMTech 2022 , 11-12 August 2022 , Semarang. pp. 100-104. (183707). ISBN 978-166545090-4 (Published)

Li, Chaochao and Huang, Miansong and Tian, Juncang and Isabella Anak Gisen, Jacqueline (2022) Research and application of the mathematical model for extreme weather event in coastal urban areas. Physics and Chemistry of the Earth, 125 (103075). pp. 1-8. ISSN 1474-7065. (Published)

Li, X. and Doh, S. I. and Ho, Chia Min and Jing, G. and Ashraf, Teara (2022) The investigation on properties of sodium sulfate-activated mortar incorporating steel slag with various replacement ratio and particle size. Physics and Chemistry of the Earth, 127 (103241). pp. 1-7. ISSN 1474-7065. (Published)

Li, Xiao Feng and Doh, S. I. and Ho, Chia Min and Chin, S. C. and Jing, Guo Qing (2022) The effect of water to cement ratio on the fresh and hardened mortar containing steel slag as cement replacement material. In: Key Engineering Materials; 5th World Sustainable Construction Conference, WSCC 2021 , 15 - 16 October 2021 , Virtual, Online. 93 -101., 912. ISSN 1013-9826 (print); 1662-9795 (online) ISBN 978-303571792-1 (Published)

Li, Xiaofeng and Doh, S. I. and Ho, Chia Min and Chin, S. C. and Chong, B. W. (2022) Investigation on the effect of steel slag as cement replacement material on mechanical properties of mortar. In: 12th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2021) , 16 - 18 November 2021 , Melaka, Malaysia. pp. 235-236.. (Published)

Li, Xiaofeng and Doh, Shu Ing and Ho, Chia Min and Mohammad I, AlBiajawi (2022) Durability properties of mortar containing steel slag as supplementary cementitious material. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 67.. (Published)

Liew, Chin Seng and Wong, Chung Yiin and Abdelfattah, Eman A. and Raksasat, Ratchaprapa and Rawindran, Hemamalini and Lim, Jun Wei and Kiatkittipong, Worapon and Kiatkittipong, Kunlanan and Mohamad, Mardawani and Yek, Peter Nai Yuh and Herma Dina, Setiabudi and Chin, Kui Cheng and Lam, Su Shiung (2022) Fungal fermented palm kernel expeller as feed for black soldier fly larvae in producing protein and biodiesel. Journals of Fungi, 8 (4). pp. 1-12. ISSN 2309-608X. (Published)

Liew, Nicole Siaw Ing and Ng, C.M. and Nur Syamimi Nabilah, Mohd Sori and Ramadhansyah, Putra Jaya and Khairil Azman, Masri (2022) Influence of aggregates shape on porous asphalt mixture. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 112.. (Published)

Liew Siaw Ing, Nicole and Ng, Cui Ming and Muzamir, Hasan and Putra Jaya, Ramadhansyah and Ekarizan, Shaffie and Nordiana, Mashros and Mohamed, Abdullahi Ali (2022) The influence of coal bottom ash as filler in asphalt mixture. In: Key Engineering Materials; 5th World Sustainable Construction Conference, WSCC 2021 , 15 - 16 October 2021 , Virtual, Online. 185 -198., 912. ISSN 1013-9826 (print); 1662-9795 (online) ISBN 978-303571792-1 (Published)

Likhan, Das and Navid, Aslfattahi and Khairul, Habib and R., Saidur and Kashif, Irshad and Syed Mohd, Yahya and Kadirgama, K. (2022) Improved thermophysical characteristics of a new class of ionic liquid + diethylene glycol/Al2O3 + CuO based ionanofluid as a coolant media for hybrid PV/T system. Thermal Science and Engineering Progress, 36 (101518). pp. 1-19. ISSN 24519049. (Published)

Lim, Aun Xian (2022) University E-voting System Utilizing Blockchain Technology and Zero-Knowledge Proofs. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lim, J.Q. and R. S. R., Mohd Zaki and S. N., Miskan and N. Aini, Razali and N. F., Jaafar (2022) Optimization of Pb(II) removal using Magnetic y-Fe2O3/KCC-1 Synthesized from Palm Oil Fuel Ash. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 8 (1). pp. 18-26. ISSN 0126-8139. (Published)

Lim, Jun Wei and Tan, Da Hui and Azrina, Abd Aziz and Singh, Lakhveer and Khodapanah, Nasrin (2022) Development of carbon nanotubes (CNTs) membrane from waste plastic: Towards waste to wealth for water treatment. In: Materials Science Forum; 3rd Postgraduate Symposium on Industrial Science and Technology, SISTEC 2021 , 25 - 26 August 2021 , Virtual, Online. pp. 143-149., 1056. ISSN 0255-5476 (Published)

Lim, Pei Yee (2022) Optimal path planning algorithm for swarm robots using bat algorithm with mutation (bam). College of Engineering, Universiti Malaysia Pahang.

Lim, Shi Ru (2022) Predicting Mental Health Disorder On Twitter Using Machine Learning Techniques. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lim, Wei Jie and Normaniha, Abd Ghani (2022) Covid-19 mandatory self-quarantine wearable device for authority monitoring with edge ai reporting & flagging system. Health and Technology, 12. pp. 215-226. ISSN 2190-7188 (printed), 2190-7196(Online). (Published)

Lina Khalida, Norazmi (2022) Internet of things (IoT) based grid tension monitoring system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ling, Fiona Wang Ming (2022) Biocatalysts synthesis and deposition in microfluidics flow system. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hayder, A. Abdulbari).

Ling, Jin Kiong and Karuppiah, Chelladurai and Das, Santanu and Izan Izwan, Misnon and Mohd Hasbi, Ab. Rahim and Yang, Chun-Chen and Jose, Rajan (2022) Electrospun ternary composite metal oxide fibers as an anode for lithium-ion batteries. Frontiers in Materials, 9 (815204). pp. 1-10. ISSN 2296-8016. (Published)

Ling, Jin Kiong and Karuppiah, Chelladurai and Das, Santanu and Singh, Vivek Kumar and Izan Izwan, Misnon and Mohd Hasbi, Ab. Rahim and Peng, Shengjie and Yang, Chun Chen and Rajan, Jose (2022) Quasi-anisotropic benefits in electrospun nickel–cobalt–manganese oxide nano-octahedron as anode for lithium-ion batteries. New Journal of Chemistry, 46 (20). pp. 9799-9810. ISSN 1144-0546. (Published)

Ling, JinKiong and Kunwar, Ria and Li, Linlin and Peng, Shengjie and Izan Izwan, Misnon and Mohd Hasbi, Ab. Rahim and Yang, Chun-Chen and Rajan, Jose (2022) Self-rechargeable energizers for sustainability. eScience, 2 (4). 347 -364. ISSN 2667-1417. (Published)

Lo, Norman Kun King (2022) Direct Tuning Phase-Shift Angle In Dab Dc-Dc Converter Using Moth Flame Optimization (Mfo) Algorithm. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Logadarshan, Krishnan (2022) Hunter For A Blood Donor Application. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Logenthiran, Machap and Kohbalan, Moorthy (2022) Survival analysis for the identified cancer gene subtype from the co-clustering algorithm. In: International Conference on Electrical, Computer, and Energy Technologies, ICECET 2022 , 20-22 July 2022 , Prague-Czech Republic. pp. 1-6. (182630). ISBN 978-166547087-2 (Published)

Loh, Jit Hao and M. Nafis, O. Z. (2022) A study on obstacle detection for IoT based automated guided vehicle (AGV). Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 30-41. ISSN 2637-0883. (Published)

Loh, Kin Ming (2022) Cancer Prediction Based On Data Mining Using Decision Tree Algorithm. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Loke, J.Y. and Ros Shazuin Rayyanu, Mohd Zaki and Setiabudi, Herma Dina (2022) Photocatalytic degradation of methylene blue using ZnO supported on wood waste-derived activated carbon (ZnO/AC). Materials Today: Proceedings, 57. pp. 1315-1321. ISSN 2214-7853. (Published)

Low, Wen-Pei and Siow, Jia-Min and Lee, Hoong-Pin and Abdul Rahman, Nurharniza and Jusli, Euniza and Putra Jaya, Ramadhansyah (2022) Mass transfer analysis of total nitrogen adsorption from river water onto tea waste (Camellia Sinensis). Physics and Chemistry of the Earth, Parts A/B/C, 128 (103249). pp. 1-6. ISSN 1474-7065. (Published)

Lu, Hongkun and Muhamad, Mat Noor and Kadirgama, Kumaran (2022) Numerical simulation of influence of eccentric needle movement on internal flow characteristics of groove-type voc nozzle. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 447-457., 2022 (22). ISSN 27324494 ISBN 978-183953782-0 (Published)

Lu, Yang and Ma, XiaoTong and Bao, Chao and Norhazilan, Md Noor and Lian, Huahua and Lim, Kar Sing (2022) Influence of earthquake disturbance on concrete strength at early age. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103280). ISSN 1474-7065. (Published)

Luqman, Abdul Halim and Firdaus, Basrawi and Ahmmad Shukrie, Md Yudin and Nurul Aini, Mohd Azman and Oumer, Ahmed Nurye and Shamsul Bahri, Abd Razak (2022) Pulsation-assisted fluidised bed drying of heat-sensitive and sticky materials: effect of basic parameter, and pulsation-specific parameter. Particulate Science and Technology. pp. 1-14. ISSN 0272-6351 (Print); 1548-0046 (Online). (Published)

Luqman, Abdul Halim and Firdaus, Basrawi and Mohammad Wajdi, Ibrahim and Ahmmad Shukrie, Md Yudin and Nurul Aini, Mohd Azman (2022) Effect of Temperature on Drying Performance of Stingless Bee Pot-Pollen Using Swirling Fluidized Bed Dryer. In: 18th International Conference on Clean Energy (ICCE2022) , Borneo Convention Centre Kuching (BCCK), Sarawak , 27-27 July 2022. pp. 1-5.. (In Press / Online First) (In Press / Online First)

Luqman Hakim, Ahmad Shah and Hou, Wentao and Razmpoosh, Mohammad Hadi and Walbridge, Scott S. and Gerlich, Adrian P. (2022) Strain rate and microtexture analysis of rapid-quenched AA6061 friction stir welds produced with tool eccentricity. Journal of Materials Research and Technology, 21. pp. 1434-1441. ISSN 2238-7854. (Published)

M

M., Faris and Fadhlur Rahman, Mohd Romlay and Akhtar Razul, Razali and M. R., Hanifah and A., Ghazali (2022) Electric vehicle drive specification modelling for three wheels scooter configuration. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 85-95., 900. ISSN 1876-1100 ISBN 978-981192094-3 (Published)

M., Faris and Fadhlur Rahman, Mohd Romlay and Akhtar Razul, Razali and M. R., Hanifah and A., Ghazali (2022) Electric vehicle drive specification modelling for three wheels scooter configuration. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 85-95., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)

M., Sandhya and D., Ramasamy and K., Kadirgama and W. S. W., Harun and R., Saidur (2022) Experimental study on properties of hybrid stable & surfactant-free nanofluids GNPs/CNCs (Graphene nanoplatelets/cellulose nanocrystal) in water/ethylene glycol mixture for heat transfer application. Journal of Molecular Liquids, 348 (118019). pp. 1-10. ISSN 0167-7322. (Published)

M., Thangavel and S. Y., Chin (2022) Valorization of palm oil via cross-metathesis reaction using 1-octene. Chemical Engineering Communications. pp. 1-14. ISSN 1563-5201. (Published)

M. A, Muhammed Nor and A. F., Yusop and M. N., Omar and N. A., Abdul Hamid and W. M., Wan Mohamed (2022) Alternative railway tools and sustainability in RAMS: A review. In: Technological Advancement in Instrumentation & Human Engineering. Lecture Notes in Electrical Engineering book series (LNEE), 882 . Springer, Singapore, pp. 541-554. ISBN 978-981-19-1576-5 (Printed); 978-981-19-1577-2(Online)

M. A., Seman and S. M., Syed Mohsin and A. M. A., Zaidi and Z. M., Jaini (2022) Numerical investigation on reduced moment resistance and increased reinforcement spacing in reinforced concrete wall subjected to blast load. International Journal of Integrated Engineering, 14 (1). pp. 353-362. ISSN 2229-838X. (Published)

M. A., Seman and Sharifah Maszura, Syed Mohsin and A.M.A., Zaidi and Z. M., Jaini (2022) Numerical investigation on reduced moment resistance and increased reinforcement spacing in reinforced concrete wall subjected to blast load. International Journal of Integrated Engineering, 14 (1). pp. 353-362. ISSN 2229-838X. (Published)

M. C., Tiong and H., Daniyal and M. H., Sulaiman and M. S., Bakar (2022) Moth flame optimization maximum power point tracking algorithm for photovoltaic system under partial shaded conditions. In: Proceedings of the 6th International Conference on Electrical, Control and Computer Engineering , 27-28 August 2022 , Virtual Conference. pp. 1-2., 842. ISBN 978-981-16-8690-0 (Published)

M. F., Ishak and M. F., Zolkepli and E. M. H., Masyhur and N. Z. M., Yunus and A. S. A., Rashid and M. A., Hezmi and D. Z. A., Hasbollah and A. R., Yusoff (2022) Interrelationship between borehole lithology and electrical resistivity for geotechnical site investigation. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103279). pp. 1-9. ISSN 1474-7065. (Published)

M. F., Ishak and M. F., Zolkepli and S., Daud and N. Z. M., Yunus and A. S. A., Rashid (2022) Unmanned Aerial Vehicle (UAV) for Slope Mapping at Perumahan Gambang Damai, Pahang: A Case Study. In: Engineering Technology International Conference (ETIC 2022) , 7 - 8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 539-546.. ISBN 978-1-83953-782-0 (Published)

M. F., Ismail and W. H., Azmi and R., Mamat and R., Ab Rahim (2022) Rheological Behaviour and Thermal Conductivity of Polyvinyl Ether Lubricant Modified with SiO2-TiO2 Nanoparticles for Refrigeration System. International Journal of Refrigeration, 138. pp. 118-132. ISSN 0140-7007. (Published)

M. F., Zolkepli and M. F., Ishak and Z., Abu Talib (2022) Unmanned Aerial Vehicle (UAV)-Based for Slope Mapping and the Determination of Potential Slope Hazard. International Journal of Integrated Engineering, 14 (1). pp. 232-239. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

M. F. F., Ab Rashid and Ahmad Nasser, Mohd Rose and N. M. Zuki, N. M. (2022) Hybrid flow shop scheduling with energy consumption in machine shop using moth flame optimization. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 77-86., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and Oumer, A. N. (2022) Modelling and optimization of energy efficient assembly line balancing using modified moth flame optimizer. International Journal of Integrated Engineering, 14 (1). pp. 25-39. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

M. F. M., Jusof and S., Mohammad and A. A. A., Razak and N. A. M., Rizal and A. N. K., Nasir and M. A., Ahmad (2022) Hybrid manta ray foraging—particle swarm algorithm for PD control optimization of an inverted pendulum. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-13., 730. ISBN 978-981334596-6 (Published)

M. Haiqal, Hamdan and Mohd Zuhaifi, Zainol and Zubair, Khalil (2022) Simulation of fault detection system of automotive coil spring by using acoustic method. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 95-104. ISSN 2636-9575. (Published)

M. L., Deng and C., Bao and A. T. S., Hung and N., Md. Noor and K. S., Lim (2022) Effect of defect geometries upon burst capacity of composite repaired pipe. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103274). pp. 1-6. ISSN 1474-7065. (Published)

M. M., Ruslan and M. F., Hassan (2022) Unbalance failure recognition using recurrent neural network. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (2). pp. 9668-9680. ISSN 2180-1606. (Published)

M. M.I., Mohd and Mohd Shafie, Bakar and Mohd Shawal, Jadin (2022) A simulation study of wireless power transfer for electric vehicle. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 305-316., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4 (Published)

M. N., Noordin and H., Osman and Hanida, Abdul Aziz and N., Rosli and M., Widia and E. H., Sukadarin and Nur Syafiqah, Fauzan and H. R., Zadry and Ahmad Azad, Ab. Rashid and Zulhaidi, Mohd Jawi (2022) Injury Pattern among drivers involved in Single Frontal Crash based on the Police Reported Accident Data in Malaysia. In: Human-Centered Technology for a Better Tomorrow: Proceedings of HUMENS 2021 , 22 February 2020 , Pekan, Pahang, Malaysia. pp. 219-229.. ISBN 978-981-16-4115-2 (Published)

M. R. A., Mohd Reduan and Z., Zulkfli and Zamzuri, Hamedon and Fatchurrohman, Nanang (2022) Effect of Tool Shoulder-to-Pin Diameter Ratio (D/d) on the Mechanical Properties of Friction Stir Processed Mg-Micro Al2O3 Composite. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10103-10111. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. Razali, Hanipah and Mikalsen, R. and Roskilly, A.P. (2022) The real-time interaction model for transient mode investigations of a dual-piston free-piston engine generator. Applied Thermal Engineering, 212 (118629). pp. 1-28. ISSN 13594311. (Published)

M. W., Fazil and Lee, Chia Kuang and P. F. M., Tamyez (2022) The moderating effect of project complexity on the relationship between organizational controls and cost estimation performance: A conceptual model. In: IOP Conference Series: Earth and Environmental Science, 5th International Conference on Research Methodology for Built Environment and Engineering (ICRMBEE) 2021 , 10 November 2021 , Shah Alam, Malaysia. pp. 1-10., 1067 (012045). ISSN 1755-1315 (Published)

M. Z., Sharif and W. H., Azmi and N. N. M., Zawawi and M. F., Ghazali (2022) Comparative air conditioning performance using SiO2 and Al2O3 nanolubricants operating with Hydrofluoroolefin-1234yf refrigerant. Applied Thermal Engineering, 205 (118053). pp. 1-13. ISSN 1359-4311. (Published)

M. Zaini, S. N. A. and M. Saad, S. K. and Jaafar, Nur Najmiyah and Abu, M. Y. (2022) Application of Mahalanobis-Taguchi System in the down-up case of methadone flexi dispensing program. Applied Mathematics and Computational Intelligence, 11 (1). pp. 73-87. ISSN 2289-1315. (Published)

Ma, Quanjin and Rejab, M. R. M. and Abu Hassan, Shukur and Hu, Haichao and Kumar, A. Praveen (2022) Potentiality of MWCNT on 3D-printed bio-inspired spherical-roof cubic core under quasi-static loading. Journal of the Mechanical Behavior of Biomedical Materials, 136 (105514). pp. 1-7. ISSN 1751-6161. (Published)

Ma, Quanjin and Rejab, M. R. M. and Azman, O. and Aleem, S. A. A. and Tung, N. A. and Asan, S. K. and Rahim, S. R. A. and Kumar, A. Praveen (2022) Development of the real-time winding angle measurement device for the laboratory-scale 3-axis winding machine. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Macnister Gestney Langga, Anding (2022) Development Of Integrative Food Waste Treatment And Lactic Acid Production. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Maha, M. R.A. and Khairul Idham, M. and Mohd Rosli, Hainin and Siti Nur Naqibah, Kamarudin and Amirah, N. A. (2022) Application of alternative filler in asphalt mixture : An overview from Indonesia perspective. In: IOP Conference Series: Earth and Environmental Science. 12th International Conference on Geotechnical Engineering in Tropical Regions: Fostering Future Through Geotechnical, Sustainable Engineering and Technology, GEOTROPIKA 2021 and 2nd International Conference on Highway and Transportation Engineering , 21 - 22 September 2021 , Semarang, Virtual. pp. 1-9., 971 (012005). ISSN 1755-1307 (Published)

Mahadi, Bahari and Aishah, Abdul Jalil and Che Rozid, Mamat and Nurul Sahida, Hassan and Herma Dina, Setiabudi and Vo, Dai Viet N. (2022) Insight into the development of silica-based materials as photocatalysts for CO2 photoconversion towards CH3OH : A review and recent progress. Surfaces and Interfaces, 31 (102049). pp. 1-20. ISSN 2468-0230. (Published)

Mahadi, Bahari and Che Rozid, Mamat and Aishah, Abdul Jalil and Nurul Sahida, Hassan and Nabgan, Walid and Herma Dina, Setiabudi and Vo, Dai Viet N. and Phuong Thuy, Bui Thi (2022) Mesoporous alumina : A comprehensive review on synthesis strategies, structure, and applications as support for enhanced H2 generation via CO2-CH4 reforming. International Journal of Hydrogen Energy, 47 (98). pp. 41507-41526. ISSN 0360-3199. (Published)

Mahadi B., Bahari and Che Rozid, Mamat and Aishah, Abdul Jalil and Siang, Tan Ji and Nurul Sahida, Hassan and Nur Farahain, Khusnun and Walid, Nabgan and Nurul Asmawati, Roslan and Sumaiya Zainal, Zainal Abidin and Herma Dina, Setiabudi and Vo, Dai Viet N. (2022) Cobalt-based catalysts for hydrogen production by thermochemical valorization of glycerol: a review. Environmental Chemistry Letters, 20 (4). pp. 2361-2384. ISSN 1610-3653. (Published)

Mahamude, Abu Shadate Faisal and Muhamad Kamal, Kamarulzaman and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Devarajan, Ramasamy and Farhana, Kaniz and Rosli, Abu Bakar and Yusaf, Talal and Subramanion, Sivarao and Yousif, Belal (2022) A Comprehensive Review on Efficiency Enhancement of Solar Collectors Using Hybrid Nanofluids. Energies, 15 (4). ISSN 1996-1073. (Published)

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Devarajan, Ramasamy and Farhana, Kaniz and Salih, Khalid and Yusaf, Talal (2022) Experimental study on the efficiency improvement of flat plate solar collector using hybrid nanofluids graphene/waste cotton. Energies, 15 (2309). pp. 1-27. ISSN 1996-1073. (Published)

Mahdi, Mazin Mustafa and Thajeel, Ekhlas Mhawi and Abu Zaharin, Ahmad (2022) Simulation of adaptive gain control via 2-D lookup table for isolated hybrid micro-grid system. International Journal of Power Electronics and Drive Systems, 13 (2). pp. 1255-1265. ISSN 2088-8694. (Published)

Mahima, Karim (2022) Hybrid mac strategy exploiting markov chain model for iot enabled intra-vehicular health monitoring system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Arafatur, Rahman).

Mahmed, Ali Nader and Mohd Nizam Mohmad, Kahar (2022) Window-based multi-objective optimization for dynamic patient scheduling with problem-specific operators. Computers, 11 (5). pp. 1-16. ISSN 2073-431X. (Published)

Mahmood, M. H. and Maleque, M. A. and Rahman, Md Mustafizur (2022) Hard-hydrophobic nano-CuO coating via electrochemical oxidation for heat transfer performance enhancement. Arabian Journal for Science and Engineering, 47 (5). 6013 -6023. ISSN 2193-567X (Print); 2191-4281 (Online). (Published)

Mahmood, Wafaa Kamil and Abdulkarim, Makarim H. and Abdulbari, Hayder A. (2022) Surfactant–solid complex for enhancing the low in pipelines : An experimental approach. Beni-Suef University Journal of Basic and Applied Sciences, 11 (85). pp. 1-12. ISSN 2314-8535. (Published)

Mail, Mohd Azuwan Efendy and Ab Razak, Mohd Faizal and Ab Rahman, Munirah (2022) Malware detection system using cloud sandbox, machine learning. International Journal of Software Engineering & Computer Sciences (IJSECS), 8 (2). pp. 25-32. ISSN 2289-8522. (Published)

Maisarah, Sheikh Rahim (2022) Apa pilihan Najib ada. Utusan Malaysia .

Maisarah, Sheikh Rahim (2022) Bangun pelan bantu rakyat tampung kos sara hidup. Utusan Malaysia .

Maisarah, Sheikh Rahim (2022) Undi pos pelajar IPT. Utusan Malaysia .

Malek, Ahmad Faiz and Rosli, Siti Nor Amira and Roslan, Nurul Asmawati and Mohd-Nasir, Nor Shafiqah and Lian, William Mah Wey and Mohd Razali, Nur Aqilah and Osazuwa, Osarieme Uyi and Zainal Abidin, Sumaiya (2022) Syngas production from glycerol dry reforming using Nd2RuO5 perovskite catalysts. In: AIP Conference Proceedings; nd Energy Security and Chemical Engineering Congress, ESChE 2021 , 3 - 5 November 2021 , Gambang, Kuantan. pp. 1-14., 2610 (030013). ISSN 0094-243X ISBN 978-073544378-5 (Published)

Manda, M. S. and M. R. M., Rejab and A.H, Shukur and S.S, Amirnuddin and M.K, Kasmar (2022) Analytical Model Evaluation on Tin Slag Polymer Concrete Behavior under Compression. In: Proceedings of the International Conference on Aerospace & Mechanical Engineering (ICAME 21). International Conference on Aerospace & Mechanical Engineering (ICAME 21) , 16-18 December 2021 , India. . (Published)

Mansor, S. and Ahmad, H. (2022) Pemberian nafkah wajib seorang wanita berpendapatan kepada kerabat dan hubungannya dengan tolakan zakat pendapatan. International Journal of Humanities Technology and Civilization (IJHTC), 7 (2). pp. 28-34. ISSN 2289-7216. (Published)

Maoqi, Li and Ishak, M. I. and Peeie, M. H. (2022) A numerical simulation of vehicle dynamics behavior for a four-wheel steering vehicle with the passive control system. Journal of Mechanical Engineering and Sciences (JMES), 16 (2). 8953 -8964. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Maoqi, Li and M. I., Ishak and P. M., Heerwan and Muhammad Aizzat, Zakaria (2022) An Approach to Neutral Steering of a 4WIS Vehicle with Yaw Moment Control. In: Enabling Industry 4.0 through Advances in Mechatronics: selected articles from iM3F 2021, Malaysia , 20 September 2021 , Universiti Malaysia Pahang (UMP). pp. 459-469., 900. ISBN 978-981-19-2095-0 (Published)

Mariah, Che Mamat (2022) Sulfide removal from petroleum refinery wastewater using hydrogen peroxide and chemically modified activated carbon. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Aziz, Mohd Azoddein).

Marlina, Yakno and Junita, Mohamad-Saleh and Mohd Zamri, Ibrahim (2022) Dorsal hand vein segmentation using Vein-Generative Adversarial Network (V-GAN) Model. In: Lecture Notes in Electrical Engineering; 11th International Conference on Robotics, Vision, Signal Processing and Power Applications, RoViSP 2021 , 5-6 April 2021 , Virtual, Online. pp. 585-591., 829 LNEE (272139). ISSN 1876-1100 ISBN 978-981168128-8 (Published)

Marzuki, Omar and Azizan, Ramli and Kharul Anwar, Johari and Saeid, Mohammed Faraj (2022) Risk-Based inspection for ammonia storage unit by using PRIMS: A case study. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 45-53., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)

Mas Ayu, Hassan and Zubaidah, Zamri and Rosdi, Daud and Norizah, Redzuan and Izman, Sudin (2022) The Effect of PLA/HA Coating Thickness on Crack Formation and Corrosion Performance. In: Advanced Materials and Engineering Technologies. Advanced Structured Materials book series (STRUCTMAT), 162 . Springer, Cham, Cham, pp. 47-53. ISBN 978-3-030-92963-3 (Printed); 978-3-030-92964-0(Online)

Mas Ira Syafila, Mohd Hilmi Tan and Mohd Faizal, Jamlos and Ahmad Fairuz, Omar and Kamarulzaman, Kamarudin and Mohd Aminudin, Jamlos (2022) Ganoderma boninense classification based on near-infrared spectral data using machine learning techniques. Chemometrics and Intelligent Laboratory Systems, 232 (104718). pp. 1-11. ISSN 0169-7439. (Published)

Masri, K. A. and Putra Jaya, Ramadhansyah and Chin, S. C. and Wan Ibrahim, Mohd Haziman (2022) Prediction of rutting resistance of porous asphalt mixture incorporating nanosilica. In: Risk, Reliability and Sustainable Remediation in the Field of Civil and Environmental Engineering. Elsevier Inc., Amsterdam, Netherlands, pp. 477-486. ISBN 9780323856980

Masriah, Mansur and Zetty Ain, Kamaruzzaman and Ahmad Afif, Ahmarofi and Cheng, Jack Kie and Hamirahanim, Abdul Rahman and K. A., Masri and Nadirah, Abdul Rahim and Sarifah Radiah, ShariffS (2022) Linking integrity with road pricing cause-and-effect model: A system dynamics simulation approach. Journal of Governance and Integrity,, 5 (3). pp. 370-381. ISSN 2600-7479. (Published)

Masrom, Umi Kalsom and Nik Mohd Alwi, Nik Aloesnita and Tarmidi, Mahlindayu (2022) Assessing The Satisfaction of Malaysian Undergraduate Students in Virtual Flipped Classroom (VFC) During Covid-19 Pandemic. In: 16th International Technology, Education and Development Conference , Online Conference , 7-8 March, 2022. pp. 10575-10583.. ISSN 2340-1079 ISBN 978-84-09-37758-9 (Published)

Masturah, Hassan (2022) Electrical system in enabled portable irrigation system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Mat Zain, Siti Nur Syamimi and Ramli, Nor Azuana and Adnan, Rose Adzreen (2022) Customer sentiment analysis through social media feedback: A case study on telecommunication company. International Journal of Humanities Technology and Civilization, 7 (2). pp. 54-61. ISSN 2600-8815 (Online) 2289-7216 (Printed). (Published)

Maziatun, Mohamad Mazlan and Nur Aqilah, Othman and Hamzah, Ahmad (2022) Improving Covariance Matrix Diagonalization in SLAM of Mobile Robot. In: Proceedings of the 12th National Technical Seminar on Unmanned System Technology 2020: NUSYS’20 , 27-28 October 2020 , Virtually via the IEEE OES Malaysia Virtual/Online Conference Platform. pp. 995-1007., 770. ISBN 978-981-16-2406-3 (Published)

Mazita, Mokhtar (2022) Taklimat Pendaftaran Syarikat oleh Suruhanjaya Syarikat Malaysia (SSM). Fakulti Pengurusan Industri dengan kerjasama Pusat Pembangunan Usahawan Kreatif (PUPUK), Universiti Malaysia Pahang.

Mazita, Mokhtar (2022) Teks Ucapan Presiden Persatuan Wanita UMP di Majlis Hi-Tea Matahari, UMP pada 14 Februari 2022. In: Majlis Hi-Tea bersama Persatuan Wanita Universiti Malaysia Pahang (Matahari), 14 Februari 2022, Hotel Zenith, Kuantan, Pahang.

Mazita, Mokhtar and Azizan, Azit and Fernando, Yudi and Wan Khairul Anuar, Wan Abd Manan (2022) The good of natural citronella soap and halal certification for Malaysian. In: Silver Award: 12th Creation, Innovation, Technology & Research Exposition (CITREX) 2022 , 11 March 2022 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Mazita, Mokhtar and NorHasnul Azirah, Abdul Hamid and Nurul Athirah, Ahmad Nazri (2022) SEATROBS: Development of Sealife Travel & Tour Online Booking System Using Usability Theory. In: Proceedings of Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2021 , 16-18 November 2021 , Virtual Conference, Universiti Teknikal Malaysia Melaka (UTeM). pp. 402-403., 28 Julai 2022. ISSN 2948-4413 (Published)

Mazita, Mokhtar and Salme, Yahya and Zetty Ain, Kamaruzzaman and Muhammad Waris, Ali Khan (2022) Motivational Factors Underlying the Intention of Herbal Soap Entrepreneurs to obtain Halal Certificate in Malaysia. Journal of Fatwa Management And Research, 27 (1). pp. 1-14. ISSN 2232-1047(Print); 0127-8886(Online). (Published)

Mazita, Mokhtar and Syed Ibrahim, Syed Ahmad (2022) Posisi, tugas dan tanggungjawab kaum hawa menurut perspektif Islam. Fikrah Pahang, Kuantan. (Unpublished)

Mazita, Mokhtar and Zulkepli, Osman (2022) Luaskan sinarmu, MATAHARI. Fikrah Pahang . pp. 1-3.

Maziyah, Mat Noh and Hamzah, Ahmad and Nur Aqilah, Othman and Pebrianti, Dwi and Herdawatie, Abdul Kadir (2022) Robust nonlinear liquid level control of a coupled-tank system using backstepping integral sliding mode control. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 665-677., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4 (Published)

Maziyah, Mat Noh and Mohd Rizal, Arshad and Rosmiwati, Mohd Mokhtar (2022) Robust nonlinear control of a buoyancy-driven airship system using backstepping integral sliding mode control. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 171-189., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6 (Published)

Mazli, Mamat and Rahimi, Ramli (2022) Peranan agen sosialisasi ibu bapa terhadap pengetahuan politik mahasiswa Melayu di universiti awam. International Journal of Humanities Technology and Civilization (IJHTC), 7 (1). pp. 33-43. ISSN 2289-7216. (Published)

Md Azam, Muhammad Nadzmi and Ramli, Nor Azuana (2022) Reported malicious codes incident within Malaysia’s landscape: Time series modelling and a timeline analysis. Advanced Data Science and Intelligence Analytics, 2 (2). pp. 1-16. ISSN 97724422680003. (Published)

Md Hasan, Siti Aishah and Ibrahim, Abdullah (2022) Firm’s technological capabilities towards technology transfer performance in Malaysian manufacturing companies: The antecedents that lead to successful development of firm’s technological capabilities. International Journal of Industrial Management (IJIM), 14 (1). 491 -505. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Md Munirul, Hasan and Rahman, Md Mustafizur and Suraya, Abu Bakar and Islam, Mir Sujaul and Kabir, Muhammad Nomani (2022) An overview of effect of activation functions on training and performance of artificial neural network modelling. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 115.. (Published)

Md Nahidul, Islam (2022) Human hearing disorder recognition model using eeg-aep based signal. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norizam, Sulaiman).

Md. Ikramul, Hoque and Muzamir, Hasan (2022) Factors affecting the construction quality in Bangladesh. International Journal of Building Pathology and Adaptation, Ahead of print (Ahead of print). pp. 1-17. ISSN 2398-4708. (In Press / Online First) (In Press / Online First)

Md. Nazmus, Sakib (2022) Study on the fabrication and mechanical characterization of graphene-epoxy nanocomposite material. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nafrizuan, Mat Yahya).

Md. Noor, Ariffin and Tarek, Mostafa and Khan, Md. Maksudur Rahman (2022) Efficient treatment of organic pollutants by boron doped TiO2 photocatalysts under visible light radiation. Chemical Engineering Research and Design, 180. pp. 1-9. ISSN 0263-8762. (Published)

Media, Baharu (2022) Program Sedekad Jelajah Ramadan rai keluarga nelayan. Berita RTM .

Media, Baharu (2022) Program jihad pendidikan, bantu ringankan beban pelajar asnaf dan B40. Berita RTM .

Media, Baharu (2022) Semat semangat patriotisme sepanjang masa bukan bermusim - Razaruddin. Berita RTM .

Megalingam, Arumugampillai and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof and Sudhakar, Kumarasamy (2022) Viscosity measurements in semi-solid metal processing: Current status and recent developments. The International Journal of Advanced Manufacturing Technology, 119 (3-4). pp. 1435-1459. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Miah, M. Saef Ullah and Junaida, Sulaiman and Sarwar, Talha and Naseer, Ateeqa and Ashraf, Fasiha and Kamal Zuhairi, Zamli and Jose, Rajan (2022) Sentence boundary extraction from scientific literature of electric double layer capacitor domain: Tools and techniques. Applied Sciences, 12 (3). pp. 1-19. ISSN 2076-3417. (Published)

Miah, Md Saef Ullah and Sarwar, Talha and Islam, Saima Sharleen and Haque, Md Samiul and Masuduzzaman, Md and Bhowmik, Abhijit (2022) An adaptive medical cyber-physical system for post diagnosis patient care using cloud computing and machine learning approach. In: 2022 3rd International Conference for Emerging Technology, INCET 2022 , 27-29 May 2022 , Belgaum. pp. 1-6. (180997). ISBN 978-166549499-1 (Published)

Miah, Mohammad Badrul Alam and Suryanti, Awang and Md Saiful, Azad and Rahman, Md Mustafizur (2022) Keyphrases Concentrated Area Identification from Academic Articles as Feature of Keyphrase Extraction: A New Unsupervised Approach. International Journal of Advanced Computer Science and Applications (IJACSA), 13 (1). pp. 788-796. ISSN 2156-5570(Online). (Published)

Miah, Mohammad Badrul Alam and Suryanti, Awang and Rahman, Md Mustafizur and A. S. M., Sanwar Hosen and Ra, In-Ho (2022) Keyphrases Frequency Analysis from Research Articles: A Region-Based Unsupervised Novel Approach. IEEE Access. pp. 1-12. ISSN 2169-3536. (Published)

Miah, Mohammad Badrul Alam and Suryanti, Awang and Rahman, Md Mustafizur and Sanwar Hosen, A. S. M. and Ra, In-Ho (2022) A New Unsupervised Technique to Analyze the Centroid and Frequency of Keyphrases from Academic Articles. Electronics, 11 (17). pp. 1-20. ISSN 2079-9292. (Published)

Miah, Roney (2022) Identification of usnic acid derivatives as new antiviral agents via virtual screening on dengue, influenza A and avian influenza A. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadhlizil Fasihi, Mohd Aluwi).

Mimi Rabita, Abdul Wahit (2022) 103 Pegawai Kadet PALAPES UMP terima pentauliahan. UMP News .

Mimi Rabita, Abdul Wahit (2022) 103 UMP ROTU Cadet Officers commissioned. UMP News .

Mimi Rabita, Abdul Wahit (2022) 11 tahun berjuang, kini Dr. Abdullah Fairuzullah genggam PhD. UMP News .

Mimi Rabita, Abdul Wahit (2022) 11 years of struggle, now Dr. Abdullah Fairuzullah has his PhD. UMP News .

Mimi Rabita, Abdul Wahit (2022) 15 Management and Professional Talent Enhancement Special Programme graduands receive MBA. UMP News .

Mimi Rabita, Abdul Wahit (2022) 15 graduan Program Khas Pemantapan Bakat Pengurusan dan Profesional terima MBA. UMP News .

Mimi Rabita, Abdul Wahit (2022) 2 Projek Inovasi UMP rangkul juara IIC 2021. UMP News .

Mimi Rabita, Abdul Wahit (2022) 2 UMP Innovation Project named 2021 IIC champions. UMP News .

Mimi Rabita, Abdul Wahit (2022) 200 SPM candidates benefit from Yayasan PETRONAS empower ECER Academic programme. UMP News .

Mimi Rabita, Abdul Wahit (2022) 22 UMP researchers listed 2 worlds top scientists for two achievement categories. UMP News .

Mimi Rabita, Abdul Wahit (2022) 22 penyelidik UMP tersenarai 2% saintis terbaik dunia bagi dua kategori pencapaian. UMP News .

Mimi Rabita, Abdul Wahit (2022) 3,472 UMP students receive student devices. UMP News .

Mimi Rabita, Abdul Wahit (2022) 3,472 mahasiswa UMP terima peranti siswa. UMP News .

Mimi Rabita, Abdul Wahit (2022) 3,556 UMP students graduate starting tomorrow for 4 days. UMP News .

Mimi Rabita, Abdul Wahit (2022) 3,556 graduan UMP bakal bergraduasi mulai esok selama 4 hari. UMP News .

Mimi Rabita, Abdul Wahit (2022) 300 staf dan kepimpinan Kumpulan UMP Holdings tunai lafaz ikrar bebas rasuah. UMP News .

Mimi Rabita, Abdul Wahit (2022) 300 staff and leadership of UMP Holdings Group sign corruption-free pledge. UMP News .

Mimi Rabita, Abdul Wahit (2022) 314 pelatih 5 UA ditauliah Inspektor Kor Sukarelawan Polis Siswa Siswi. UMP News .

Mimi Rabita, Abdul Wahit (2022) 314 trainees from 5 public universities commissioned as Inspector of Police Undergraduate Voluntary Corps. UMP News .

Mimi Rabita, Abdul Wahit (2022) 35 Competency Based Talent Management (CBTM) programme graduands celebrated by UMP Advanced. UMP News .

Mimi Rabita, Abdul Wahit (2022) 35 graduan program Competency Based Talent Management CBTM dirai dalam program anjuran UMP Advanced. UMP News .

Mimi Rabita, Abdul Wahit (2022) 4,083 UMP students graduate in 16th MKK. UMP News .

Mimi Rabita, Abdul Wahit (2022) 4,083 graduan UMP bergraduasi dalam MKK Ke-16. UMP News .

Mimi Rabita, Abdul Wahit (2022) 4,535 UMP graduands celebrated in MKK17 starting this Saturday. UMP News .

Mimi Rabita, Abdul Wahit (2022) 4,535 graduan UMP bakal dirai dalam MKK17 mulai Sabtu ini. UMP News .

Mimi Rabita, Abdul Wahit (2022) 50 KILAU UMP volunteers plant 400 trees in Tasik Chini. UMP News .

Mimi Rabita, Abdul Wahit (2022) 50 joined Post Flood Volunteer Mission in Mentakab. UMP News .

Mimi Rabita, Abdul Wahit (2022) 50 sukarelawan KILAU UMP tanam 400 pokok di Tasik Chini. UMP News .

Mimi Rabita, Abdul Wahit (2022) 6 UMP subjects listed in QSWUR by Subject 2022, world-recognised. UMP News .

Mimi Rabita, Abdul Wahit (2022) 6 subjek UMP tersenarai di QSWUR by Subject 2022, diiktiraf dunia. UMP News .

Mimi Rabita, Abdul Wahit (2022) Age 83 is not a hindrance Dr. Jahid gets a second PhD. UMP News .

Mimi Rabita, Abdul Wahit (2022) Aidilfitri disambut meriah, UMP rai Saintis dan pelajar. UMP News .

Mimi Rabita, Abdul Wahit (2022) Amalan gaya hidup lestari sumbang terhadap pemeliharaan alam sekitar. UMP News .

Mimi Rabita, Abdul Wahit (2022) Aplikasi MyPerahu UMP perkasa aktiviti sosioekonomi dan ekopelancongan nelayan. UMP News .

Mimi Rabita, Abdul Wahit (2022) Associate Professor Ts. Dr. Rusllim appointed TNC HEPA UMP. UMP News .

Mimi Rabita, Abdul Wahit (2022) Biasiswa Sulung Yayasan UMP khas buat pelajar B40. UMP News .

Mimi Rabita, Abdul Wahit (2022) Collaboration between DVS and UMP on blockchain system for swiftlet bird nest industry launched. UMP News .

Mimi Rabita, Abdul Wahit (2022) DREBARedu latih pelajar TVET fahami sistem robotik, bina robot. UMP News .

Mimi Rabita, Abdul Wahit (2022) Dr. Noormazlinah smart SSB research produces additional nutrients for plants. UMP News .

Mimi Rabita, Abdul Wahit (2022) E-anfun detects odour volatility in industry, UMP and SDR find solution due to pollution. UMP News .

Mimi Rabita, Abdul Wahit (2022) E-anfun kesan kemeruapan bau dalam industri, UMP dan SDPR temui solusi akibat pencemaran. UMP News .

Mimi Rabita, Abdul Wahit (2022) Examining the role of green human resources management (GHRM) in building green corporate image and green competitive advantage in malaysian public universities. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Ashraf, Fauri@Fauzi).

Mimi Rabita, Abdul Wahit (2022) Flexible education opportunity to increase knowledgeable human capital development. UMP News .

Mimi Rabita, Abdul Wahit (2022) German Ambassadors visit to UMP strengthens bilateral good relations. UMP News .

Mimi Rabita, Abdul Wahit (2022) Golf Tournament strengthens family ties between UA. UMP News .

Mimi Rabita, Abdul Wahit (2022) Graduan berkompetensi tinggi punyai kelebihan dalam kebolehpasaran. UMP News .

Mimi Rabita, Abdul Wahit (2022) Graduan berkompetensi, berkepimpinan menjadi pilihan majikan. UMP News .

Mimi Rabita, Abdul Wahit (2022) Graduan pintar teknologi dan ilmu keusahawanan beri nilai tambah. UMP News .

Mimi Rabita, Abdul Wahit (2022) Graduates with competencies and leadership sought by employers. UMP News .

Mimi Rabita, Abdul Wahit (2022) High-competence graduates have advantages in marketability. UMP News .

Mimi Rabita, Abdul Wahit (2022) His Majesty the Regent of Pahang appointed Royal Patron of UMP Volunteers. UMP News .

Mimi Rabita, Abdul Wahit (2022) Imbau kenangan konvo UMP yang bermakna. UMP News .

Mimi Rabita, Abdul Wahit (2022) Impian konvokesyen yang tidak mungkin tiba - Sakinah. UMP News .

Mimi Rabita, Abdul Wahit (2022) Jualan nombor plat khas UC cecah RM3 juta, kini dibuka untuk jualan umum. UMP News .

Mimi Rabita, Abdul Wahit (2022) KDYMM Pemangku Raja Pahang dilantik Penaung Diraja Sukarelawan UMP. UMP News .

Mimi Rabita, Abdul Wahit (2022) KILAU UMP Volunteers join Baling Post Flood Volunteer Mission. UMP News .

Mimi Rabita, Abdul Wahit (2022) KILAU UMP volunteers donate sahur meals to city residents. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kalam On The Go Virtual Immersive Learning Experience finalist AKRI 2022. UMP News .

Mimi Rabita, Abdul Wahit (2022) Karnival Bahasa dan Budaya UMP meriah. UMP News .

Mimi Rabita, Abdul Wahit (2022) Karnival STEM UMP terap budaya pemikiran saintifik, kreatif dan inovatif. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kejohanan Golf erat hubungan kekeluargaan antara UA. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kekal pencapaian 5 bintang, UMP fokus peningkatan kualiti pendidikan tinggi. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kembara UMP Prihatin serves Kapit community. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kembara UMP prihatin berbakti bersama masyarakat Kapit. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kerja sukarelawan dekat di hati Saiyidatul Marsyitah. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kerjasama UMP, YIM manfaatkan Ruang Reka STIE buat komuniti Bera. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kolaborasi Geran Penyelidikan CRG UMP UTHM UMK UUM. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kolaborasi UMP, Sango-Town dan Social Welfare Corporation Lemonkai bangunkan program rehabilitasi dan kepimpinan inklusif. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kolaborasi strategik UMP dan Seeloz dalam pembangunan Teknologi AI. UMP News .

Mimi Rabita, Abdul Wahit (2022) Konvokesyen UMP melabuh tirainya catat sejarah 12,174 graduan dirai sepanjang tahun 2022. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kunjungan Duta Besar Jerman ke UMP perkukuh hubungan baik dua hala. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kunjungan rasmi delegasi UMP ke MMU Cyberjaya teroka kerjasama strategik. UMP News .

Mimi Rabita, Abdul Wahit (2022) Lebih 1,000 pelajar rebut peluang sambung belajar dalam Program B40 UPU2U. UMP News .

Mimi Rabita, Abdul Wahit (2022) MS ISO 9001 2015 certification improve UMP holistic graduates competitiveness. UMP News .

Mimi Rabita, Abdul Wahit (2022) MTUN meterai MoU dengan JPKK perkasa TVET negara. UMP News .

Mimi Rabita, Abdul Wahit (2022) MTUN seals MoU with JPPKK empowers national TVET. UMP News .

Mimi Rabita, Abdul Wahit (2022) Medium Cendawan Nanas hasil penyelidikan UMP dilancar. UMP News .

Mimi Rabita, Abdul Wahit (2022) Mini Karnival KPT Prihatin Keluarga Malaysia assists Mersing residents. UMP News .

Mimi Rabita, Abdul Wahit (2022) Mini Karnival KPT Prihatin Keluarga Malaysia santuni penduduk Mersing. UMP News .

Mimi Rabita, Abdul Wahit (2022) More than 1,000 students seize opportunity to pursue study in B40 UPU2U Programme. UMP News .

Mimi Rabita, Abdul Wahit (2022) More than 300 UMP volunteers help clean up flood waste. UMP News .

Mimi Rabita, Abdul Wahit (2022) Muhammad Arif juarai WorldSkills Malaysia Belia wakili negara dalam bidang Digital Construction. UMP News .

Mimi Rabita, Abdul Wahit (2022) Muhammad Arif wins WorldSkills Malaysia Youth represents country in Digital Construction. UMP News .

Mimi Rabita, Abdul Wahit (2022) NST journalist receives masters degree from UMP. UMP News .

Mimi Rabita, Abdul Wahit (2022) Nombor plat khas UMP UC mulai dibida 1 Februari depan. UMP News .

Mimi Rabita, Abdul Wahit (2022) Nurul Ashikin mahasiswa UMP galas cabaran dalam Sukan SEA Hanoi. UMP News .

Mimi Rabita, Abdul Wahit (2022) Our Kitchen Project helps UMP students. UMP News .

Mimi Rabita, Abdul Wahit (2022) PLPU meets UMP campus residents observe Ramadan. UMP News .

Mimi Rabita, Abdul Wahit (2022) PLPU santuni warga kampus UMP imarahkan Ramadan. UMP News .

Mimi Rabita, Abdul Wahit (2022) Pelajar FK berjaya bawa pulang hadiah sagu hati dalam Huawei ICT Competition 2022-2023. UMP News .

Mimi Rabita, Abdul Wahit (2022) Pelajar UMP mulai pulang ke kampung balik mengundi. UMP News .

Mimi Rabita, Abdul Wahit (2022) Pelajar UMP teruja raikan sambutan Aidilfitri. UMP News .

Mimi Rabita, Abdul Wahit (2022) Pendidikan fleksibel peluang tingkat keupayaan pembangunan modal insan berilmu. UMP News .

Mimi Rabita, Abdul Wahit (2022) Pengalaman Pembelajaran Imersif Maya Kalam On The Go finalis AKRI 2022. UMP News .

Mimi Rabita, Abdul Wahit (2022) Pensijilan MS ISO 9001 2015 tingkat daya saing graduan holistik UMP. UMP News .

Mimi Rabita, Abdul Wahit (2022) Penyelidikan Dr. Noormazlinah SMART SSB hasilkan tambahan nutrisi terhadap tanaman. UMP News .

Mimi Rabita, Abdul Wahit (2022) Pineapple Mushroom Medium UMP research output launched. UMP News .

Mimi Rabita, Abdul Wahit (2022) Plant rare trees treasures for younger generation. UMP News .

Mimi Rabita, Abdul Wahit (2022) Prof. Dato Ts. Dr. Yuserrie dilantik Naib Canselor UMP ke 5. UMP News .

Mimi Rabita, Abdul Wahit (2022) Prof. Madya Ts. Dr. Rusllim dilantik TNC HEPA UMP. UMP News .

Mimi Rabita, Abdul Wahit (2022) Profesor Dato Ts. Dr. Yuserrie dilantik semula sebagai Naib Canselor UMP. UMP News .

Mimi Rabita, Abdul Wahit (2022) Professor Dato Ts. Dr. Yuserrie re appointed UMP Vice Chancellor. UMP News .

Mimi Rabita, Abdul Wahit (2022) Program Outreach UMP KPT JAKM fokus Inovasi Sosial dan STEM. UMP News .

Mimi Rabita, Abdul Wahit (2022) Projek CSR UMP Lighting Up The Community diperluas bantu komuniti. UMP News .

Mimi Rabita, Abdul Wahit (2022) Projek Dapur Kita bantu mahasiswa UMP. UMP News .

Mimi Rabita, Abdul Wahit (2022) Remain 5 star achievement, UMP focuses on improving higher education quality. UMP News .

Mimi Rabita, Abdul Wahit (2022) Sesi libat urus UMP bersama pengamal media dan pegawai agensi di Negeri Pahang. UMP News .

Mimi Rabita, Abdul Wahit (2022) Singgah Sahur UMP santuni pelajar luar kampus, asnaf dan petugas barisan hadapan. UMP News .

Mimi Rabita, Abdul Wahit (2022) Sistem Blockchain Perusahaan Sarang Burung Walet hasil kerjasama DVS dan UMP dilancar. UMP News .

Mimi Rabita, Abdul Wahit (2022) Spread the opportunity for Jom Masuk UMP. UMP News .

Mimi Rabita, Abdul Wahit (2022) Strategic collaboration between UMP and Seeloz in developing AI technology. UMP News .

Mimi Rabita, Abdul Wahit (2022) Sukarelawan KILAU UMP sumbang juadah sahur buat warga kota. UMP News .

Mimi Rabita, Abdul Wahit (2022) Sukarelawan UMP KILAU sertai Misi Kesukarelawanan Pascabanjir Baling. UMP News .

Mimi Rabita, Abdul Wahit (2022) Sukarelawan UMP Kilau hulur bantuan banjir Pantai Timur. UMP News .

Mimi Rabita, Abdul Wahit (2022) Sustainable lifestyle contributes to environmental preservation. UMP News .

Mimi Rabita, Abdul Wahit (2022) Tech-and entrepreneur-savvy add value to graduates. UMP News .

Mimi Rabita, Abdul Wahit (2022) UC special plate number sale reaches RM3 million, now open for public. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP MyPerahu app empowers fishermens socioeconomic and ecotourism activities. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP STEM Carnival inculcates culture of scientific, creative and innovative thinking. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP UC special plate numbers bid opens 1 February. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP UTHM UMK UUM Research Grant Collaboration CRG. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP and HsMA Germany are offering dual degree programme in business engineering. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP and Pahang State Government collaborate in big data analytics. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP cakna kebajikan pelajar. Berita Harian .

Mimi Rabita, Abdul Wahit (2022) UMP celebrates volunteers watch Mat Kilau Kebangkitan Pahlawan. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP collaborates with 3 industries to improve graduate competitiveness. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP collaborates with NanoMalaysia Berhad in BICEP Research Project. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP collaborates with industries to strengthen WBL, career placement. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP convocation officially ends, 12,174 graduands celebrated throughout 2022. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP dan Kerajaan Negeri Pahang jalin kerjasama dalam analitis data raya. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP diiktiraf hab bidang Automotif TVET. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP engagement session with Pahang media practitioners and agency officials. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP hantar pasukan Sukarelawan KILAU bantu mangsa banjir di Baling. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP hosts 49th Public University Golf Tournament. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP hosts MASUM Sports Tournament Phase 1. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP jalin kerjasama antarabangsa dengan Istanbul Medipol University IMU dan Ankara Medipol University AMU. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP jalin kerjasama dengan 3 industri tingkatkan daya saing graduan. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP jalin kerjasama dengan 8 rakan industri. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP jalin kerjasama dengan NanoMalaysia Berhad dalam Projek Penyelidikan BICEP. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP jalin kerjasama dengan industri perkukuh pembelajaran WBL, penempatan kerjaya. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP lancar buku Rukun Negara dan Pancasila Ideologi dan Amalan. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP lancar pakej makanan Ready to Eat guna teknologi retort. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP launches Ready to Eat food package using retort technology. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP launches book on Rukun Negara dan Pancasila Ideologi dan Amalan. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP naik ke tangga 103 terbaik dunia dalam penarafan UI GWUR 2022. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP offers Science and Technology Foundation Programme. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP perhebat bantuan di musim peperiksaan. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP prihatin bantu bawa pelajar baharu daftar masuk kampus. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP provides a helping hand during exam season. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP rai sukarelawan tonton filem Mat Kilau Kebangkitan Pahlawan. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP ranked 301-400 in THE Impact Rankings. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP receives MPV from Perodua. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP receives RM63,650 research grant for Pahang State Pondok School Education System. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP recognised as hub for TVET automotive. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP residents celebrate Aidilfitri, appreciate frontliners. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP sends KILAU Volunteers to help flood victims in Baling. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP sends volunteers to focus on clean-up operations and aid distribution. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP student Nurul Ashikin shoulder challenge in Hanoi SEA Games. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP students begin returning home to cast votes. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP students excited to celebrate Eid. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP students use Adab UMP cash coupon app Food Campus. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP students use Kad Prihatin Siswa instead of matric cards. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP tawar Program Asasi Sains dan Teknologi. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP terima MPV sumbangan Perodua. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP tersenarai di kedudukan 301-400 THE Impact Rankings. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP tuan rumah Kejohanan Golf Universiti Awam Kali Ke-49. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP tuan rumah Penganjuran Kejohanan Sukan MASUM Fasa 1. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP volunteers continue to provide assistance for flood victims. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP wins Special Award and 14 gold medals in ITEX 2022. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, ASSB jalin kerjasama strategik dalam akademik dan pembangunan insan. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, ASSB establish strategic collaboration in academic and human development. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, HsMA meterai kerjasama dalam program Dual Ijazah Kejuruteraan Perniagaan. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, HsMA seal collaboration in Business Engineering Dual Degree programme. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, Huawei Services Hong Kong Co., Limited improve collaboration in telecommunications and mobile application technology. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, Huawei Services Hong Kong Co., Limited tingkat kerjasama dalam bidang telekomunikasi dan teknologi aplikasi mudah alih. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, IMPACT MALAYSIA meterai kerjasama program Inovasi Belia dan Komuniti. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, IMPACT MALAYSIA seal collaboration of Youth and Community Innovation programme. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, MBK bakal berkolaborasi dalam pengurusan sistem lalu lintas dan pengangkutan awam yang efektif. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, MBK collaborate in effective management of traffic and public transport systems. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, Sango-Town and Social Welfare Corporation Lemonkai collaboration establishes inclusive rehabilitation and leadership programme. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, Ulm University of Applied Sciences collaborate on German Model campus sustainability programme. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, Ulm University of Applied Sciences jalin kerjasama dalam program kelestarian kampus Model Jerman. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, YASA meterai kerjasama strategik dalam program pendidikan, penyelidikan dan komuniti. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, Yasa seal strategic collaboration in education, research and community programmes. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP-MOHE JAKM Outreach Programme focuses on Social Innovation and STEM. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP-RTM santuni masyarakat Nenasi dalam Jelajah Ramadan Sedekad. UMP News .

Mimi Rabita, Abdul Wahit (2022) Unsung heroes Yo save flood victims. UMP News .

Mimi Rabita, Abdul Wahit (2022) Usia 83 bukan halangan Dr. Jahid dapat PhD kedua. UMP News .

Mimi Rabita, Abdul Wahit (2022) Wan Raizulhazmi terima tuah Siswa Sulung UMP. UMP News .

Mimi Rabita, Abdul Wahit (2022) Warga UMP sambut Aidilfitri, rai barisan hadapan. UMP News .

Mimi Rabita, Abdul Wahit (2022) Wartawan NST terima ijazah sarjana UMP. UMP News .

Mimi Rabita, Abdul Wahit (2022) Yayasan UMP Sulung Scholarship especially for B40 students. UMP News .

Mimi Rabita, Abdul Wahit (2022) Yayasan UMP receives RM470,648 from MUIP for zakat distribution and disaster relief. UMP News .

Mimi Rabita, Abdul Wahit (2022) Yayasan UMP terima RM470,648 sumbangan MUIP untuk agihan zakat dan bantuan bencana. UMP News .

Mimi Rabita, Abdul Wahit (2022) Yo service remembered, receives award from UMP. UMP News .

Miminorazeansuhaila, Loman and Mohd Hafizi, Zohari (2022) Fatigue Detection on glass fibre reinforced polymer material using Fiber Bragg Grating sensor. In: Structural Integrity Cases in Mechanical and Civil Engineering. Structural Integrity, 23 (23). Springer, Cham, Springer. Cham, pp. 115-125. ISBN 978-3-030-85645-8 (Printed); 978-3-030-85646-5(Online)

Miza Liyana Taha, Sulaiman and Muhammed Nafis, Osman Zahid (2022) Leveraging six sigma tools to improve student performance in technical courses at secondary school. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 83-89., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)

Mohamad, Ahmad Muhaimin (2022) Analisis pola penggunaan portal e-pembelajaran dan pencapaian subjek. Journal of ICT in Education, 9 (1). pp. 100-116. ISSN 2289-7844. (Published)

Mohamad, Ahmad Muhaimin (2022) Kefasihan bacaan Al-Fatihah: Analisis dalam kalangan pelajar kejuruteraan. Journal of Islamic, Social, Economics and Development (JISED), 7 (45). pp. 156-165. ISSN 0128-1755. (Published)

Mohamad Azhar, Amley (2022) IoT-based smart energy meter. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Mohamad Dzol, M. A.A. and Balasundram, Vekes and Shameli, Kamyar and Norazana, Ibrahim and Zainuddin, Abdul Manan and Ruzinah, Isha (2022) Catalytic pyrolysis of high-density polyethylene over nickel-waste chicken eggshell/HZSM-5. Journal of Environmental Management, 324 (116392). pp. 1-6. ISSN 0301-4797. (Published)

Mohamad Ezuan, Abdul Jalil and Azizan, Ramli and Nurulain Athirah, Khairul Fahmi (2022) A study on Process Safety Management (PSM) effectiveness based on human, technological and organizational factors in an oleochemical plant. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 36-39., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)

Mohamad Faizal, Ridzwan and Saiful Anwar, Che Ghani and Goyal, A. (2022) Numerical analysis of internal flow in internally cooled cutting tool. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 116.. (Published)

Mohamad Hafidzul Rahman, Alias (2022) Optimization of solenoid driver and controller for gaseous fuel high-pressure direct injector using model-based approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil, Abdul Rahim).

Mohamad Idris, Ali and Mohammad Syamsyul Hairi, Saad (2022) Risiko Bencana Banjir Pentingnya Pengetahuan dan Kesedaran. UMP News .

Mohamad Idris, Ali and Syamsul Bahari, Abdullah (2022) Bersama kurangkan kesan bencana banjir. UMP News .

Mohamad Iqhmannabil, Karim (2022) Model And Control Of Double Link Flexible Robotic Manipulator System For Spatial Trajectory Tracking Following Task. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Mohamad Iqhmannabil, Karim and Azrul Azim, Abdullah Hashim and Nor Maniha, Abdul Ghani (2022) Control of double link flexible robotic manipulator system. Journal Europeen des Systemes Automatises, 55 (6). pp. 759-763. ISSN 1269-6935. (Published)

Mohamad Izuan, Izzudin (2022) Investigation on performance, combustion and emission characteristics using biodiesel-butanol-water blends in diesel engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Fitri, Yusop).

Mohamad Milood, Mohamad Almelian (2022) Enhancement of performance and response time of cascaded vsc statcom in the presence of voltage variation and low power factor. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Izzeldin Ibrahim, Mohamed Abdelaziz).

Mohamad Razwan, Abdul Malek and Nor Azlina, Ab. Aziz and Alelyani, Salem and Mohana, Mohamed and Farah Nur Arina, Baharudin and Zuwairie, Ibrahim (2022) Comfort and energy consumption optimization in smart homes using bat algorithm with inertia weight. Journal of Building Engineering, 47 (103848). pp. 1-14. ISSN 2352-7102. (Published)

Mohamad Rizza, Othman (2022) Pensyarah UMP bantu reka bentuk sistem modular kawalan pencemaran udara bagi pembakaran sisa klinikal. UMP News .

Mohamad Rizza, Othman (2022) UMP lecturers assist in design of air pollution control modular system for clinical waste incineration. UMP News .

Mohamad Rizza, Othman (2022) UMP perkasa Agenda Transformasi Digital Program TVET melalui kerjasama strategik bersama AspenTech. UMP News .

Mohamad Sazuan, Sarifudin (2022) Waste reduction guideline for production line using boolean algebra. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhamad Arifpin, Mansor).

Mohamad Shaiful, Abdul Karim and Norazwina, Zainol and Nur izaty Ak'ma, Abu Hassan As'ari and Nurhafizah, Abu Talip Yusof and Nor Hazwani, Aziz (2022) Effect of processing parameters on cellulose content extracted from pineapple leaf. Biocatalysis and Agricultural Biotechnology, 42 (102339). pp. 1-12. ISSN 1878-8181. (Published)

Mohamad Shofi, Mat Isa (2022) 1,400 juadah berbuka puasa setiap hari kepada penuntut UMP. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2022) 10 peserta Kursus Fiber Optik Muip-UMP Advanced peroleh pekerjaan. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2022) Bapa kuatkan hati terima anugerah Anumerta arwah anak. UMP News .

Mohamad Shofi, Mat Isa (2022) Dua dekad mencapai kegemilangan, UMP sanjung jasa staf. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2022) Enam subjek UMP tersenarai di QSWUR by Subject 2022, diiktiraf dunia. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2022) Ibu sebak naik pentas terima ijazah arwah anak. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2022) Jualan nombor plat khas UC cecah RM3 juta, kini dibuka untuk jualan umum. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2022) Kekal pencapaian lima bintang, UMP fokus tingkat kualiti pendidikan tinggi. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2022) MPP baharu UMP disaran subur empat budaya dan kebersamaan mahasiswa. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2022) PRU15: Anak muda 18 hingga 21 tahun perlu lakar sejarah. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2022) UMP pergiat kerjasama industri teroka teknologi berimpak tinggi. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2022) UMP perkenal Skim Insentif Penerbitan buat pelajar pascasiswazah. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2022) UMP perluas jaringan kerjasama antarabangsa dengan Konstanz University of Applied Sciences Jerman. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2022) Yuserrie dilantik Naib Canselor UMP. UMP News .

Mohamad Syafiq, Abdul Wahab (2022) Development of graphene oxide incorporated polysulfone/pebax thin-film composite membranes for isopropanol dehydration. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sunarti, Abd Rahman).

Mohamad Syahmi, Ismail (2022) Design And Simulation Study Of Antenna For Wireless Body Area Network (Wban). College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Mohamad Syahmi, Ismail and Fahmi, Samsuri (2022) Design and simulation study of antenna for wireless body area network (WBAN). In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 214.. (Published)

Mohamad Zaidi, Mohd Akmal Naim and Sapuan, Noraina Mazuin and Kusairi, Suhal (2022) The business survival of micro-enterprises in facing economic uncertainty. Journal of Governance & Integrity, 5 (3). pp. 328-335. ISSN 2600-7479. (Published)

Mohamad Zainuddin, Mohamed and Ahmad Irfan, Ikmal Hisham (2022) Pemikiran intelektual Syeikh Abd Al-Samad Al-Falimbani. International Journal of Humanities Technology and Civilization (IJHTC), 7 (1). pp. 44-48. ISSN 2289-7216. (Published)

Mohamad Zulhelmi, Hasan (2022) Improvement Of Power Factor In Distribution Network With Correlation To Harmonic. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Mohamed, Latifah Naina and Fernando, Yudi and Gani, Anisha Banu Dawood (2022) A conceptualization of Industrial Internet of Things towards Manufacturing Safety Performance. Journal of Advanced Research in Business and Management Studies, 29 (1). pp. 1-8. ISSN 2462-1935. (Published)

Mohamed Ariff, Ameedeen (2022) Transforming education with cutting-edge technology. CIOReview .

Mohamed Reza Zalani, Mohamed Suffian (2022) Plasma spray of nicraly coating on laser surface modified H13 tool steel. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah Nur Aqida, Syed Ahmad).

Mohamed Saad, Bala Husain (2022) Synthesis and characterization of wound healing hydrogel using keratin protein from chicken feathers. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Arun, Gupta).

Mohamed Zul Fadhli, Khairuddin and Khairunnisa, Hasikin and Nasrul Anuar, Abd Razak and Lai, Khin Wee and Mohd Zamri, Osman and Aslan, Muhammet Fatih and Sabanci, Kadir and Muhammad Mokhzaini, Azizan and Satapathy, Suresh Chandra (2022) Predicting occupational injury causal factors using text-based analytics : A systematic review. Frontiers in Public Health, 10 (984099). pp. 1-17. ISSN 2296-2565. (Published)

Mohammad, Azeem and Hamdan, Haji Ya and Kumar, Mukesh and Stabla, Paweł and Smolnicki, Michal Jan and Gemi, Lokman and Khan, Rehan and Ahmed, Tauseef and Quanjin, Ma and Sadique, Rehan Rehan and Ainul Akmar, Mokhtar and Mazli, Mustapha (2022) Application of filament winding technology in composite pressure vessels and challenges : A review. Journal of Energy Storage, 49 (103468). ISSN 2352-152X. (Published)

Mohammad Aidil Shafiq, Mustafa and Nuranis Yasira, Abd Halim and Nurfatin Husna, Najamulharis and Fatin Zafirah, Mansur (2022) Fabrication and characterization of the eco-brick using plastic waste. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 210.. (Published)

Mohammad Amirulkhairi, Zubir and Muhammad Nazrin Akmal, Ahmad Zawawi and Mohd Fairuz, Azmi (2022) Mechanical properties of synthetic lightweight coarse aggregate infuse with offshore sand. Journal of Advanced Research in Applied Sciences and Engineering Technology, 28 (2). pp. 372-379. ISSN 2462-1943. (Published)

Mohammad Azimuddin, Izani and Nurul `Azyyati, Sabri and Nurul Nadiah, Hamidon and Kooi Yeong, Khaw and Iekhsan, Othman and Mueller, Jochen and Joo Hui, Tay (2022) Validation of analytical method for testing the levels of illicit drugs in Municipal Wastewater influent samples. In: 2 nd Applied Science Research International Conference 2022 (2 nd ASRIC 2022) , 21 September 2022 , Virtual Conference. pp. 1-3.. ISBN 978-629-97630 (online) (Published)

Mohammad Khamees Khaleel, Alsajri (2022) Improved hybrid teaching learning based optimization-jaya and support vector machine for intrusion detection systems. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Arfian, Ismail).

Mohammad Syukur, Md Noh and Saiful Anwar, Che Ghani and Wan Sharuzi, Wan Harun (2022) Investigation the contribution of process areas to lower back pain among manual assembly workers in medical device industry. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 281-288., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)

Mohammed, Ahmed Talab (2022) Integration of blcm and flbp in low resolution face recognition. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Suryanti, Awang).

Mohammed, Badiea Abdulkarem and Senan, Ebrahim Mohammed and Al-Mekhlafi, Zeyad Ghaleb and Rassem, Taha Hussein and Makbol, Nasrin M. and Alanazi, Adwan Alownie and Almurayziq, Tariq S. and Ghaleb, Fuad A. and Sallam, Amer A. (2022) Multi-method diagnosis of CT images for rapid detection of intracranial hemorrhages based on deep and hybrid learning. Electronics (Switzerland), 11 (2460). ISSN 2079-9292. (Published)

Mohammed Hammam, Mohammed Almadani (2022) The effects of energy management practices on ecological performance: mediating role of renewable energy supply chain. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Yudi, Fernando).

Mohan, Varun Geetha and Al-Fahim, Mubarak-Ali and Ameedeen, Mohamed Ariff and Vijayan, Bincy Lathakumary and Aminuddin, Afrig and Widayani, Wiwi (2022) Predictive models using supervised neural network for pollutant removal efficiency in petrochemical wastewater treatment. In: 2022 5th International Conference on Information and Communications Technology (ICOIACT) , 24-25 August 2022 , Yogyakarta, Indonesia. pp. 1-6.. ISSN 2770-4661 ISBN 978-1-6654-5140-6 (Published)

Mohan, Varun Geetha and Ameedeen, Mohamed Ariff and Vijayan, Bincy Lathakumary and Al-Fahim, Mubarak-Ali (2022) A review on predictive models designed from artificial intelligence techniques in the wastewater treatment process. In: Trends, Paradigms, and Advances in Mechatronics Engineering. Premier Reference Source . IGI Global, Pennsylvania, United States, pp. 242-264. ISBN 9781668458877

Mohd, Nasrullah and Ansar, Sabah and Krishnan, Santhana and Singh, Lakhveer and Gouse Peera, S. Gouse and Zularisam, Abdul Wahid (2022) Electrocoagulation treatment of raw palm oil mill effluent : Optimization process using high current application. Chemosphere, 299 (134387). pp. 1-10. ISSN 0045-6535. (Published)

Mohd Aiman Syahmi, Kamarul Baharin and Ahmad Shahrizan, Abdul Ghani and Normawaty, Mohammad-Noor and Hasnun Nita, Ismail and Syafiq Qhushairy, Syamsul Amri (2022) Automatic phytoplankton image smoothing through integrated dual image histogram specification and enhanced background removal method. The Imaging Science Journal. pp. 1-23. ISSN 1368-2199 (Printed); 1743-131X. (Published)

Mohd Ali, Nur Fahriza and Mohd Sadullah, Ahmad Farhan and Zulkiple, A. (2022) Logistic regression approach in studying travel demand during morning peak hour: A case study in Klang Komuter Station, Malaysia. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 91-99. ISSN 2637-0883. (Published)

Mohd Amin, Jalil (2022) UMP dekati masyarakat melalui kempen Sikamat Sihat. Berita Harian .

Mohd Aminudin, Jamlos and Nurasma Husna, Mohd Sabri and Mohd Faizal, Jamlos and Wan Azani, Mustafa and Syed Zulkarnain, Syed Idrus and Mohamad Nur Khairul Hafizi, Rohani and Khairul Najmy, Abdul Rani and Mohd Al Hafiz, Mohd Nawi (2022) 5.8 GHz circularly polarized rectangular microstrip antenna arrays simulation for point-to-point application. Journal of Advanced Research in Applied Sciences and Engineering Technology, 28 (3). pp. 209-220. ISSN 2462-1943. (Published)

Mohd Amir Izuddin, Mohamad Ghazali and Zuraina, Ali and A.A.A, Rahim (2022) Examining ESL pre-service teachers’ perceived roles and perceived responsibilities of teaching writing skills. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 140.. (Published)

Mohd Amir Izuddin, Mohamad Ghazali and Zuraina, Ali and Azwin Arif, Abdul Rahim (2022) Adopting Design and Development Research (DDR) Approach in Framing the ESL Preservice Teachers’ Roles and Responsibilities to Teach Writing Skills. Journal of Pharmaceutical Negative Results, 13 (6). pp. 695-704. ISSN 0976-9234. (Published)

Mohd Amiruddin, Fikri and Wan Mohcd Faizal, Wan Ishak and Hasyiya Karimah, Adli and Rizalman, Mamat and Wan Azmi, Wan Hamzah and Anwar Ilmar, Ramadhan (2022) TiO2-SiO2 nanofluids mixture with W/EG for solar water heating system: Thermal conductivity analysis based on different ratios. In: AIP Conference Proceedings, International Conference on Bioengineering and Technology (IConBET2021) , 24-25 May 2021 , Kelantan, Malaysia. pp. 1-8., 2454 (040008). ISBN 978-0-7354-4193-4 (Published)

Mohd Amirul Hakim, Sidek and Rosli, Mohd Yunus and Muhammad Remanul, Islam and Firouzi, Amin (2022) Physical and Mechanical Properties of Waste Red-Gypsum Based Concrete Composites. In: Advanced Transdisciplinary Engineering and Technology. Advanced Structured Materials (STRUCTMAT), 174 . Springer, Champ, pp. 235-251. ISBN 978-3-031-01487 (Printed) 978-3-031-01488-8(Online)

Mohd Amirul Hilmi, Mohd Hanoin (2022) Development of solar assisted membrane distillation system using solar thermal collector. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nadzirah, Mokhtar).

Mohd Amirul Hilmi, Mohd Hanoin and Farah Najihah, Zainuddin and Nadzirah, Mohd Mokhtar (2022) A review of solar-powered membrane distillation system : Concept design and development. In: Eurasia Proceedings of Science, Technology, Engineering and Mathematics. International Conference on Technology, Engineering and Science, IConTES 2022 , 16 - 19 November 2022 , Antalya. pp. 27-38., 21. ISSN 2602-3199 ISBN 978-605728324-5 (Published)

Mohd Amirul Hilmi, Mohd Hanoin and Nadzirah, Mohd Mokhtar (2022) Performance evaluation of solar assisted membrane distillation for seawater desalination using solar simulator. In: Eurasia Proceedings of Science, Technology, Engineering and Mathematics. International Conference on Technology, Engineering and Science, IConTES 2022 , 16 - 19 November 2022 , Antalya. pp. 404-411., 21. ISSN 2602-3199 ISBN 978-605728324-5 (Published)

Mohd Ashraf, Ahmad and Jui, Julakha Jahan and Mohd Riduwan, Ghazali (2022) Using adaptive safe experimentation dynamics algorithm for maximizing wind farm power. In: 2022 57th International Universities Power Engineering Conference: Big Data and Smart Grids, UPEC 2022 - Proceedings , 30 August-2 September 2022 , Istanbul. pp. 1-4. (183656). ISBN 978-166545505-3 (Published)

Mohd Ashraf, Ahmad and Jui, Julakha Jahan and Mohd Riduwan, Ghazali (2022) Using adaptive safe experimentation dynamics algorithm for maximizing wind farm power production. In: 2022 57th International Universities Power Engineering Conference: Big Data and Smart Grids, UPEC 2022 - Proceedings. 57th International Universities Power Engineering Conference: Big Data and Smart Grids, UPEC 2022 , 30 August - 2 September 2022 , Istanbul. pp. 1-4.. ISBN 978-166545505-3 (Published)

Mohd Ashraf, Ahmad and Mohd Zaidi, Mohd Tumari and Mohd Riduwan, Ghazali and Mohd Helmi, Suid (2022) Implementation of safe experimentation spiral dynamics algorithm for self-tuning of PID controller in elastic joint manipulator. In: 2022 IEEE 10th Conference on Systems, Process and Control, ICSPC 2022 - Proceedings , 17 December 2022 , Malacca. pp. 56-61. (185865). ISBN 978-166547098-8 (Published)

Mohd Aufa Hadi Putera, Zaini and Mohd Mawardi, Saari and Ummi Sabihah, Mohd Yusdi and Nurul A'in, Nadzri and Zulkifly, Mohammad @ Ab Aziz and Ngien, Su Kong (2022) Development of a differential magnetic probe to evaluate metal loss due to corrosion. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 75.. (Published)

Mohd Azam, Muhamad Akhir (2022) 26 Pegawai Kadet UMP ditauliah Leftenan Muda. UMP News .

Mohd Azlan Fahmi, Muhammad Azmi and Mohd Fadzil, Abdul Rahim and Rizalman, Mamat (2022) Simulation of direct injection, mixing and combustion of CNG fuel in a single - cylinder engine with different injector orientations using CFD. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 83-90., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)

Mohd Azmir, Arifin and Mel, Maizirwan and Swan, Sia Yiik and Nurhusna, Samsudin and Hashim, Yumi Zuhanis Has-Yun and Mohd Salleh, Hamzah (2022) Optimization of ultraviolet/ozone (UVO3) process conditions for the preparation of gelatin coated polystyrene (PS) microcarriers. Preparative Biochemistry and Biotechnology, 52 (2). pp. 181-196. ISSN 1082-6068. (Published)

Mohd Aznorizamin, Ismail (2022) Profesor Ts. Dr. Mohd Rusllim Mohamed dilantik sebagai Presiden AUSC. UMP News .

Mohd Aznorizamin, Ismail (2022) UMP will host 2022 Public University Golf Tournament. UMP News .

Mohd Azri Hizami, Rasid (2022) Estimation of iron losses in a SynRM with segmented rotor. In: 1st IEEE Industrial Electronics Society Annual On-Line Conference, ONCON 2022. 1st IEEE Industrial Electronics Society Annual On-Line Conference, ONCON 2022 , 9 - 11 December 2022 , Kharagpur. pp. 1-6.. ISBN 979-835039806-9 (Published)

Mohd Azri Hizami, Rasid and Muhammad Nor Azril, Zulkafli and Daing Mohamad Nafiz, Daing Idris (2022) Evaluation of DC machine armature winding temperature estimation using temperature measured on brush and bearing. In: 1st IEEE Industrial Electronics Society Annual On-Line Conference, ONCON 2022. 1st IEEE Industrial Electronics Society Annual On-Line Conference, ONCON 2022 , 9 - 11 December 2022 , Kharagpur. pp. 1-6.. ISBN 979-835039806-9 (Published)

Mohd Azri Hizami, Rasid and Muhammad Nor Azril, Zulkafli and Daing Mohamad Nafiz, Daing Idris and Nurul Fatimah, Abdullah (2022) Experimental evaluation of temperature distribution in armature of a brushed dc machine using thermal imaging. In: 2022 International Conference on Electrical Machines, ICEM 2022 , 5-8 September 2022 , Valencia. pp. 1927-1933. (183486). ISBN 978-166541432-6 (Published)

Mohd Azrul, Mohd Azmi (2022) Development of ROV cleaning robot. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Mohd Azrul Hisham, Mohd Adib and Rabiatul Aisyah, Ariffin and Mohd Hanafi, Abdul Rahim and Muhammad, Rais Rahim and Muhammad Shazzuan, Sharudin and Afif Awaluddin, Othman and Ahmad Hijran, Nasaruddin and Afiq Ikmal, Zahir and Idris Mat, Sahat and Nurul Shahida, Mohd Shalahim and Narimah, Daud and Nur Hazreen, Mohd Hasni (2022) Development of Physiotherapy-Treadmill (PhyMill) as Rehabilitation Technology Tools for Kid with Cerebral Palsy. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 829-838., 730 (262829). ISSN 18761100 ISBN 978-981334596-6 (Published)

Mohd Azrul Hisham, Mohd Adib and Rahim, Md Abdur and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2022) Pediatrics technology applications : Enhance the bilirubin jaundice (BiliDice) device for neonates using color sensor. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 839-847., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Mohd Bazli, Bahar and Mohd Shahrieel, Mohd Aras and Shahrum Shah, Abdullah and San, Ng Sin and Zainah, Md Zain and Ahmad Anas, Yusof and Mohd Zaidi, Mohd Tumari (2022) Design and development of Spherical Amphibian Vehicle (SAV). In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 3-11., 770 (266059). ISSN 18761100 ISBN 978-981162405-6 (Published)

Mohd Fadzil Faisae, Ab Rashid and Muhammad Ammar, N. M. (2022) A novel Tiki-Taka algorithm to optimize hybrid flow shop scheduling with energy consumption. Engineering and Applied Science Research, 49 (2). pp. 189-200. ISSN 2539-6218. (Published)

Mohd Fadzil Faisae, Ab Rashid and Nik Mohd Zuki, Nik Mohamed and Ahmad Nasser, Mohd Rose (2022) Multi-objective multi-verse optimiser for integrated two-sided assembly sequence planning and line balancing. Journal of Combinatorial Optimization, 44 (1). 850 -876. ISSN 1573-2886. (Published)

Mohd Fadzil Faisae, Ab Rashid and Nik Mohd Zuki, Nik Mohamed and Oumer, Ahmed Nurye (2022) Modelling and optimization of energy efficient assemblyline balancing using modified moth flame optimizer. International Journal of Integrated Engineering, 14 (1). pp. 25-39. ISSN 2229-838X. (Published)

Mohd Faizal, Ab Razak and Mohd Izham, Jaya and Ernawan, Ferda and Ahmad Firdaus, Zainal Abidin and Nugroho, Fajar Agung (2022) Comparative analysis of machine learning classifiers for phishing detection. In: Proceedings - International Conference on Informatics and Computational Sciences; 6th International Conference on Informatics and Computational Sciences, ICICoS 2022 , 28-29 September 2022 , Virtual, Online. pp. 84-88., 2022 (183902). ISSN 2767-7087 ISBN 978-166546099-6 (Published)

Mohd Falfazli, Mat Jusof and Ahmad Nor Kasruddin, Nasir and Ahmad Azwan, Abdul Razak and Nurul Amira, Mhd Rizal and Mohd Ashraf, Ahmad and Ikhwan Hafiz, Muhamad (2022) Adaptive-somersault MRFO for global optimization with an application to optimize PD control. In: Proceedings of the 12th National Technical Seminar on Unmanned System Technology 2020: NUSYS’20 , 27-28 October 2020 , Virtually via the IEEE OES Malaysia Virtual/Online Conference Platform. pp. 1027-1039., 770. ISBN 978-981162405-6 (Published)

Mohd Farid, Ismail (2022) Performance of polyvinyl ether based nanolubricants in residential air conditioning. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Azmi, Wan Hamzah).

Mohd Farid, Ismail and Azmi, Wan Hamzah and Rizalman, Mamat and Hamisa, Abdul Hamid (2022) Experimental Investigation on Newtonian Behaviour and Viscosity of TiO2/PVE Nanolubricants for Application in Refrigeration System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 92 (1). pp. 9-17. ISSN 2289-7879. (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat (2022) Comparison of Preparation Methods Effect on the Stability of Compressor oil-based Nanolubricant. Journal of Advanced Research in Applied Mechanics, 91 (1). pp. 1-6. ISSN 2289-7895. (Published)

Mohd Fauzi, Mohamad Yusof (2022) Power energy management and control for isolated hybrid pv/energy storages microgrid system. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Zaharin, Ahmad).

Mohd Fauzi, Syafiqah Hanis and Mohd Jamil, Norazaliza (2022) Oxi-P GUI: A Graphical User Interface (GUI) for wastewater treatment process in oxidation pond. Data Analytics and Applied Mathematics (DAAM), 3 (1). pp. 52-60. ISSN 2773-4854. (Published)

Mohd Fawzi, Zamri and Ahmad Razlan, Yusoff (2022) Effect of rake angle and feed rate on tool wear and surface topography for different chip size in machining carbon steels. Jurnal Tribologi, 34 (MITC202ONE (Part 2)). pp. 1-11. ISSN 2289-7232. (Published)

Mohd Ghazali, Maarof and Gusman, Nawanir and Muhammad Fakhrul, Yusuf (2022) Review paper: Enhancing manufacturing flexibility implementation through industry 4.0 technology. International Journal of Business and Economy, 4 (3). pp. 290-302. ISSN 2682-8359. (Published)

Mohd Ghazali, Maarof and Gusman, Nawanir and Muhammad Fakhrul, Yusuf (2022) The meaning of manufacturing flexibility as perceived by Malaysian Manufacturing Practitioners. International Journal of Business and Technology Management, 4 (1). pp. 112-119. ISSN 2682-7646. (Published)

Mohd Hafizi, Zohari (2022) Fiber Bragg Grating Gap Sensor as An Innovative Idea for Critical Flange Monitoring. FTKMA Bulletin, 3 . p. 16. ISSN 2773-594X

Mohd Hafizi, Zohari and Epin, Vorathin and Nur Ainaa Adhreena, Muhamad Shukri (2022) Turnkey fibre bragg grating interrogator for real-time static and dynamic monitoring applications. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 250-254., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)

Mohd Hanafi, Abdul Rahim (2022) Development design study of heart rate, spo2, and temperature measurement of infant using non-invasive infawrap device. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Azrul Hisham, Mohd Adib).

Mohd Hanafi, Abdul Rahim and Mohd Azrul Hisham, Mohd Adib and Mohamad Zairi, Baharom and Nur Hazreen, Mohd Hasni (2022) Infant-Wrap (InfaWrap) device as pediatric technology tool: The heart rate and SpO2 monitoring for neonates. In: 6th Kuala Lumpur International Conference on Biomedical Engineering 2021 , 28-29 July 2021 , Kuala Lumpur, Malaysia. pp. 331-339., 86 (86). ISSN 1680-0737 (Printed); 1433-9277 (Online) ISBN 978-3-030-90723-5 (Printed); 978-3-030-90724-2 (Online) (Published)

Mohd Hanafi, Muhammad Sidik and Saiful Anwar, Che Ghani and Abdul, Nasir and Muhammad Nur Farhan, Saniman (2022) Evaluation of misclassification matrix method in validation of an assistive device for manual wheelchair propulsion. International Journal of Engineering Trends and Technology, 70 (12). pp. 272-280. ISSN 2349-0918. (Published)

Mohd Hanif, Ismai and Megat Azmi, Megat Johari and Kamar Shah, Ariffin and Putra Jaya, Ramadhansyah and Mohd Haziman, Wan Ibrahim and Yugashini, Yugashini (2022) Performance of high strength concrete containing Palm Oil Fuel Ash and Metakaolin as Cement Replacement Material. Advances in Civil Engineering. pp. 1-11. ISSN 1687-8094. (Published)

Mohd Harizan, Zul and M., Ishak and Aiman, Mohd Halil and Quazi, M. M. (2022) Fabrication of Superhydrophobic on Ti6Al4V by Using the Hybrid Process of Nanosecond Laser Texturing. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. Lecture Notes in Mechanical Engineering. 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3-5 November 2021 , Universiti Malaysia Pahang (Virtual Conference). pp. 341-350.. ISSN 2195-4356 ISBN 978-981-19-4424-6 (Published)

Mohd Hefzan, Azmi and Muhammad Nubli, Abdul Wahab (2022) Construction of Enhanced Recovery Training Module for Former Drug Addicts. EDUCATUM Journal of Social Sciences (EJoSS), 8 (1). pp. 92-103. ISSN 2289-9391. (Published)

Mohd Hefzan, Azmi and Muhammad Nubli, Abdul Wahab (2022) Construction of Enhanced Recovery Training Module for FormerDrug Addicts. EDUCATUM Journal of Social Sciences (EJoSS), 8 (1). pp. 92-103. ISSN 2289-9391. (Published)

Mohd Herwan, Sulaiman and Zuriani, Mustaffa (2022) Optimal chiller loading solution for energy conservation using Barnacles Mating Optimizer algorithm. Results in Control and Optimization, 7 (100109). pp. 1-12. ISSN 2666-7207. (Published)

Mohd Herwan, Sulaiman and Zuriani, Mustaffa (2022) Optimal placement and sizing of FACTS devices for optimal power flow using metaheuristic optimizers. Results in Control and Optimization, 8 (100145). pp. 1-12. ISSN 2666-7207. (Published)

Mohd Hilmy Naim, Mohd Yakin and Nik Abdullah, Nik Mohamed and Mohd Ruzaimi, Mat Rejab (2022) Effect of particle discretization and horizon size on the displacement and damage plot using bond-based peridynamics. In: Technological Advancement in Mechanical and Automotive Engineering. Lecture Notes in Mechanical Engineering . Springer, Singapore, 881 -897. ISBN 978-981-19-1456-0

Mohd Hilmy Naim, Mohd Yakin and Nik Mohamed, Nik Abdullah and Mohd Ruzaimi, Mat Rejab and Nur A., Hashim (2022) 1D peridynamics subjected to quasi-static load with adaptive dynamic relaxation. Journal of Engineering and Technology (JET). pp. 1-4. ISSN 2180-3811. (In Press / Online First) (In Press / Online First)

Mohd Hisyam, Ariff and Imran, Saifullah and Rahimah, Jusoh and Mohammed Nazmus, Shakib and Mohammad Fadhil, Abas (2022) U-slot microstrip patch array antenna for UHF RFID reader. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 927-937., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4 (Published)