Items where Year is 2015

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Number of items: 2337.

Article

A., Mahfurdz and Sunardi, . and Hamzah, Ahmad and Syed, Abdullah and Nazuki, . (2015) Distinguish sea turtle and fish using sound technique in designing acoustic deterrent device. Telkomnika, 13 (4). pp. 1305-1311. ISSN 1693-6930. (Published)

A. K., Prasada Rao (2015) Nucleation in Al Alloys Processed By MCDC Casting. Journal of Materials Engineering and Performance, 24 (6). pp. 2219-2224. ISSN 1544-1024. (Published)

A. K., Prasada Rao and S. L., Pramod and B. S., Murty and Srinivasa R., Bakshi (2015) Effect of Sc Addition on the Microstructure and Wear Properties of A356 Alloy and A356–TiB2in Situ Composite. Materials and Design, 78. pp. 85-94. ISSN 0261-3069. (Published)

A. K. M., Moshiul Alam and Beg, M. D. H. and R. M., Yunus (2015) Influence of Carbon Nano Tubes on the Thermo-Mechanical Properties of Unsaturated Polyester Nanocomposite. IOP Conference Series: Materials Science and Engineering, 78. pp. 1-6. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

A. N., Oumer and M. S., Idris and N. M. M., Ammar and Kurniawan, Tedi (2015) Numerical and Experimental Investigation on Tensile Properties of Natural-Sand Reinforced Polypropylene. Advanced Materials Research, 1115. pp. 283-287. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

A. R., Mohd Farhan and K. Y., Pin and M. S., Zamree and Luqman Chuah, Abdullah and Nazira, Mahmud (2015) Optimisation of Solid Liquid Extraction of Orthosiphon stamineus Leaves using Response Surface Methodology Technique. Pertanika Journal of Tropical Agricultural Science, 38 (2). pp. 259-270. ISSN 1511-3701 (Print); 2231-8542 (Online). (Published)

A. R., Razali and M., Ishak and Mohd Azam, Musa and Nazrul Idzham, Kasim and Wan Ahmad Najmuddin, Wan Saidin (2015) Improvement of Overall Equipment Effectiveness (OEE) through Implementation of Autonomous Maintenance in Crankcase Line. Applied Mechanics and Materials, 761. pp. 165-169. ISSN 1662-7482. (Published)

A. R., Razali and M., Ishak and Nazrul Idzham, Kasim and Mohd Azam, Musa (2015) Effect of Magnetic Flux on Rotor-Stator Arrangement of Neodymium Permanent Magnet. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7749-7752. ISSN 1819-6608. (Published)

A. R., Razali and Nazrul Idzham, Kasim and Mohd Azam, Musa and Noraishah, Mohamad Noor and Wan Ahmad Najmuddin, Wan Saidin (2015) Improvement of Overall Equipment Effectiveness (OEE) through Implementation of Total Productive Maintenance (TPM) in Manufacturing Industries. Applied Mechanics and Materials, 761. pp. 180-185. ISSN 1662-7482. (Published)

A. R., Zulhishamuddin and S. N., Aqida (2015) An Overview of High Thermal Conductive Hot Press Forming Die Material Development. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1686-1694. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abd Hamid, Zahidy and Noor Azlinna, Azizan and Sorooshian, Shahryar (2015) Predictors for the Success and Survival of Entrepreneurs in the Construction Industry. International Journal of Engineering Business Management, 7 (1). pp. 1-11. ISSN 1847-9790. (Published)

Abduaziz, Oumer and Jack, Kie Cheng and Razman, Mat Tahar and Ramaraju, Ramgopal Varma (2015) A hybrid Simulation model for Green Logistics Assessment in Automotive Industry. Procedia Engineering, 100. pp. 960-969. ISSN 1877-7058. (Published)

Abdul Adam, Abdullah and Amir, Khalid and N., Jaat and A., Sapit and A., Razali and Bukhari, Manshoor and Izzuddin, Zaman (2015) Performance and Emissions Characteristics of Crude Jatropha Oil Biodiesel Blends in a Diesel Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2447-2457. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Abdul Adam, Abdullah and Mohd Herzwan, Hamzah and Agung, Sudrajad and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2015) Analysis of Combustion Characteristics of Waste Plastic Disposal Fuel (WPDF) and Tire Derived Fuel (TDF). Applied Mechanics and Materials, 773 (774). pp. 600-604. ISSN 1662-7482. (Published)

Abdul Aziz, Mohd Azoddein and Ahmad Bazli, Bustary and F. A. M., Azli and N. H. Z., Abidin and I. M., Ali and M. S. M., Desa (2015) Study of Palm Oil Mill Effluents Treatment Using Bio Engineered Structure Biomedia. Journal of Engineering and Technology, 6 (2). pp. 67-74. ISSN 2180-3811. (Published)

Abdul Aziz, Mohd Azoddein and Hazlan, Haris and Faten Ahada, Mohd Azli (2015) Treatment of palm oil mill effluent (POME) using membrane bioreactor. Malaysian Journal of Analytical Sciences, 19 (3). pp. 463-471. ISSN 1394-2506. (Published)

Abdul Hamid, K. and Azmi, W. H. and R., Mamat and Usri, N. A. and G., Najafi (2015) Effect of Temperature on Heat Transfer Coefficient of Titanium Dioxide in Ethylene Glycol-based Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1367-1375. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abdul Hamid, K. and Azmi, W. H. and R., Mamat and Usri, N. A. and G., Najafi (2015) Investigation of Al2O3 Nanofluid Viscosity for Different Water/EG Mixture Based. Energy Procedia, 79. pp. 354-359. ISSN 1876-6102 . (Published)

Abdul Syakir, Abdul Mubin and Norhafizan, Ahmad and Azuddin, Mamat and Zahari, Taha and Iskandar, Hasanuddin (2015) CFD Study of Drag and Lift of Sepak Takraw Ball at Different Face Orientations. Advances in Mechanical Engineering, 7 (1). pp. 1-10. ISSN 1687-8132 (Print); 1687-8140 (Online). (Published)

Abdul Syukor, Abd Razak and Norbaizurah, Rahman and Nur Azzimah, Zamri and Suryati, Sulaiman and Noor Asyikin Aisyah, Burhanudin and Hasmanie, Abdul Halim and Edriyana, Abd Aziz (2015) COD, BOD and Heavy Metal Removal from Ground Water Treatment by using WASRA System: A Case Study on Universiti Malaysia Pahang Mosque. Advances in Environmental Biology, 9 (1). pp. 26-29. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Abdul Syukor, Abd Razak and Nur Azzimah, Zamri and Norbaizurah, Rahman and Suryati, Sulaiman and Nurhidayah, Mahazam and Hasmanie, Abdul Halim and Edriyana, Abd Aziz (2015) Removal of Physical Properties in Water Supply by WASRA for Sustainable Irrigation System. Advances in Environmental Biology, 9 (1). pp. 30-34. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Abdulbari, Hayder A. and Basheer, Esmail Abdullah Mohammed and Ainoon, Shabirin and Wafaa, Kamil Mahmood (2015) Investigating the Degradation Resistance Improvement of Polymer Surfactant Complex Drag Reducing Agent. Applied Mechanics and Materials, 789-790. pp. 7-14. ISSN 1662-7482. (Published)

Abdulbari, Hayder A. and Faraj, Emsalem (2015) Studying the Interaction between a New Mixture in Enhancing Drag Reduction Efficiency. International Journal of Chemical Engineering and Applications (IJCEA), 6 (4). pp. 277-280. ISSN 2010-0221. (Published)

Abdulbari, Hayder A. and Faraj, Emsalem and Jolius, Gimbun and Mahmood, Wafaa K. (2015) Energy Dissipation Reduction Using Similarly-Charged Polymer-Surfactant Complex. Advances and Applications in Fluid Mechanics, 18 (1). pp. 113-128. ISSN 0973-4686. (Published)

Abdulbari, Hayder A. and Fiona Ling, Wang Ming (2015) Drag Reduction Properties of Nanofluids in Microchannels. The Journal of Engineering Research (TJER), 12 (2). pp. 60-67. ISSN 1726-6009 (print); 1726-6742(online). (Published)

Abdulbari, Hayder A. and Hassan D., Mahammed and Zulkefli B. Y., Hassan (2015) Bio-Inspired Passive Drag Reduction Techniques: A Review. ChemBioEng Reviews, 2 (3). pp. 185-203. ISSN 2196-9744. (Published)

Abdulbari, Hayder A. and Hawege, Emsalem (2015) Polymer-Surfactant Complex for Enhancing the Mechanical and Drag Reduction Performances of a Turbulent Flow. Australian Journal of Basic and Applied Sciences, 9 (8). pp. 1-6. ISSN 1991-8178. (Published)

Abdulbari, Hayder A. and Oluwasoga, Akindoyo Edward (2015) Drag Reduction Efficacy of CTABr and Nanosilica Particles Using Rotating Disk Apparatus (RDA). Australian Journal of Basic and Applied Sciences, 9 (8). pp. 136-144. ISSN 1991-8178. (Published)

Abdulbari, Hayder A. and Oluwasoga, Akindoyo Edward and Zainab, Yousif (2015) A Dual Mechanism of the Drag Reduction by Rigid Polymers and Cationic Surfactant: Complex and Nanofluids of Xanthan Gum and Hexadecyl Trimethyl Ammonium Chloride. International Journal of Research in Engineering and Technology (IJRET), 4 (2). pp. 84-93. ISSN 2321-7308 (print); 2319-1163 (online). (Published)

Abdulbari, Hayder A. and R. M., Yunus and Charles, A. (2015) A Turbulence-altering Pseudo-surface (TAPS) for Enhancing the Flow in Pipes. Chemical Engineering Communications, 203 (2). pp. 278-286. ISSN 1563-5201. (Published)

Abdullah, Nasser and Alsewari, Abdulrahman A. and Kamal Z., Zamli (2015) Tuning of Cuckoo Search Based Strategy for T-Way Testing. Journal of Engineering and Applied Sciences, 10 (19). 8948 -89453. ISSN 1819-6608. (Published)

Abdulrazak, Lway Faisal and Oudah, Ali A. (2015) Interference Mitigation Technique Through Shielding and Antenna Discrimination. International Journal of Multimedia and Ubiquitous Engineering (IJMUE), 10 (3). pp. 343-352. ISSN 1975-0080. (Published)

Abolghasem, Akbari and Leila, Sedaei and Mehdi, Naderi and Azizan, Abu Samah and Nazila, Sedaei (2015) The Application of the Water Erosion Prediction Project (WEPP) Model for the Estimation of Runoff and Sediment on a Monthly Time Resolution. Environmental Earth Sciences, 74 (7). pp. 5827-5837. ISSN 1866-6299. (Published)

Adams, Rebecca and Nik Aloesnita, Nik Mohd Alwi and Newton, Jonathan (2015) Task Complexity Effects on the Complexity and Accuracy of Writing Via Text Chat. Journal of Second Language Writing, 29 (Sept.). pp. 64-81. ISSN 1060-3743. (Published)

Adamu I., Abu Bakar and Akram, M. Zeki and Haruna, Chiroma and Sanah, Abdullahi Muaz and Eka, Novita Sari and Tutut, Herawan (2015) Spread Spectrum Audio Watermarking Using Vector Space Projections. Advances in Intelligent Systems and Computing, 320. pp. 297-307. (Published)

Addie Irawan, Hashim and A. R., Razali and Wan Faizal, Wan Ishak and Mohd Rizal, Arshad and Tan, Yee Yin (2015) Development of Hexaquad Robot: Modeling and Framework. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17506-17513. ISSN 1819-6608. (Published)

Addie Irawan, Hashim and Alam, Md. Moktadir and Yee, Yin Tan and Mohd Rizal, Arshad (2015) Center of Mass-Based Admittance Control for Multi-Legged Robot Walking on the Bottom of Ocean. Jurnal Teknologi (Sciences and Engineering), 74 (9). pp. 1-7. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Afifuddin Husairi, Hussain and Mohd Khairi, Abu Husain and Adi Irfan, Che Ani and Noor Irza, Mohd Zaki and Mohd Ali, Z. (2015) Unlocking the Potential Value of BIM Implementation in Malaysia: A Pilot Study. European Journal of Advances in Engineering and Technology, 2 (12). pp. 11-20. ISSN 2394 - 658X. (Published)

Ahamed, Nizam Uddin and Ahmed, Nasim and Alqahtani, Mahdi and Altwijri, Omar and Ahmad, Badlishah and Sundaraj, Kenneth (2015) Investigation of the EMG-Time Relationship of the Biceps Brachii Muscle During Contractions. Journal of Physical Therapy Science, 27 (1). pp. 39-40. ISSN 0915-5287. (Published)

Ahamed, Nizam Uddin and Zulkifli, Md. Yusof and Al-Mamun, Md. Abdullah and Rahman, S. A. M. Matiur and Ahmed, Nasim and Hassnawi, L. A. (2015) Automatic Car Parking and Controlling System Using Programmable Logic Controller (PLC). International Journal of Applied Engineering Research (IJAER), 10 (1). pp. 69-75. ISSN 0973-4562 (print); 1087-1090 (online). (Published)

Ahamed, Nizam Uddin and Zulkifli, Md. Yusof and Alqahtani, Mahdi and Altwijri, Omar and Rahman, S. A. M. Matiur and Sundaraj, Kenneth (2015) Gender Effects in Surface Electromyographic Activity of the Biceps Brachii Muscle during Prolonged Isometric Contraction. Procedia Computer Science, 61. pp. 448-453. ISSN 1877-0509. (Published)

Ahmad, Awais and Akbari, Abolghasem and Iqbal, Javed (2015) GIS-Based Identification Of Overloaded Distribution Transformers & Calculation Of Technical Electric Power Losses. International Journal of Civil Engineering and Geo-Environmental, 6 (1). pp. 14-21. ISSN 2180-2742. (Published)

Ahmad Affendi, Hashim and Mazlina, Abdul Majid (2015) Effects of Video Display Terminal Resolutions to the Legibility of Text on a Web Page. International Journal of Software Engineering & Computer Sciences (IJSECS), 1. pp. 131-154. ISSN 2289-8522. (Published)

Ahmad Faizal, Mohd Zain and Jia, Wei Low and Nafarizal, Nayan and Mohd Zainizan, Sahdan and Mohd Khairul, Ahmad and Ali Yeon, Md Shakaff and Ammar, Zakaria (2015) Spectroscopic Studies of Magnetron Sputtering Plasma Discharge in Cu/O2/Ar Mixture for Copper Oxide Thin Film Fabrication. Jurnal Teknologi (Sciences and Engineering), 73 (1). pp. 11-15. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Ahmad Nor Kasruddin, Nasir and Nor Maniha, Abd Ghani and Tokhi, M. O. (2015) Novel Adaptive Bacterial Foraging Algorithms for Global Optimisation with Application to Modelling of a TRS. Expert Systems with Applications, 42 (3). pp. 1513-1530. ISSN 0957-4174. (Published)

Ahmad Nor Kasruddin, Nasir and Raja Mohd Taufika, Raja Ismail and Mohd Ashraf, Ahmad (2015) Exponential-Based Spiral Dynamic Algorithm for Modelling of a Flexible Manipulator System. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17450-17456. ISSN 1819-6608. (Published)

Ahmad Nor Kasruddin, Nasir and Tokhi, M. O. (2015) An Improved Spiral Dynamic Optimization Algorithm with Engineering Application. IEEE Transactions On Systems, Man, And Cybernetics: Systems, 45 (6). pp. 943-954. ISSN 2168-2216. (Published)

Ahmad Nor Kasruddin, Nasir and Tokhi, M. O. (2015) Novel Metaheuristic Hybrid Spiral-Dynamic Bacteria-Chemotaxis Algorithms for Global Optimisation. Applied Soft Computing, 27. pp. 357-375. ISSN 1568-4946 (print); 1872-9681 (online). (Published)

Ahmad Rasdan, Ismail and S. N. A., Abdullah and Abdul Adam, Abdullah and B. M., Deros (2015) Whole-Body Vibration Exposure Of Malaysian Taxi Drivers. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2786-2792. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahmad Rasdan, Ismail and Siti Nur Atikah, Abdullah and Ahmad Adam, Abdullah and Ab Hamid, Mohd Rashid and Baba, M. Deros (2015) Relationship between thermal comfort and driving performance among Malaysian bus driver. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7406-7411. ISSN 1819-6608. (Published)

Ahmad Rasdan, Ismail and Siti Nur Atikah, Abdullah and Ahmad Adam, Abdullah and Ab Hamid, Mohd Rashid and Baba, M. Deros (2015) Relationship between thermal comfort and driving performance among Malaysian bus driver. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7406-7411. ISSN 1819-6608. (Published)

Ahmad Tarmizi, Haron and Marshall-Ponting, Amanda J. and Zahrizan, Zakaria and Mohd Nasrun, Mohd Nawi and Zuhairi, Abd Hamid and Kamarul Anuar, Mohamad Kamar (2015) An industrial report on the Malaysian building information modelling (BIM) taskforce: Issues and recommendations. Malaysian Construction Research Journal, 17 (2). pp. 21-36. ISSN 1985-3807 (Print), 2590-4140 (Online). (Published)

Ahmed, Abdulghani Ali and Aman, Jantan and Wan, Tat-Chee (2015) Filtration Model for the Detection of Malicious Traffic in Large-Scale Networks. Computer Communications. ISSN 0140-3664. (In Press / Online First) (In Press / Online First)

Ahmed, Abdulghani Ali (2015) Filtration Model For DDoS Attack Detection in Real-Time. International Journal of Software Engineering & Computer Sciences (IJSECS), 1. pp. 95-108. ISSN 2289-8522. (Published)

Ahmed, Abdulghani Ali (2015) Investigation Model for Ddos Attack Detection in Real-Time. International Journal of Software Engineering & Computer Sciences (IJSECS), 1. pp. 93-105. ISSN 2289-8522. (Published)

Ahmed, Yassin Mustafa and Khidhir, Basim A. and Khairul Saleh, Mohamed Sahari and M., Ishak (2015) Study of Mechanical Properties on Thick Titanium Alloy (Ti - 6Al- 4V) Multi-Passes Weld. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2 (4). pp. 660-665. ISSN 3159-0040. (Published)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2015) Heat Transfer of Alumina Sands in Fluidized Bed Combustor with Novel Circular Edge Segments Air Distributor. Energy Procedia, 75. pp. 1752-1757. ISSN 1876-6102. (Published)

Aini Norhidayah, Mohamed and Jaya Vejayan, Palliah and M. M., Yusoff (2015) Detection and Quantification of Eurycomanone Levels in Tongkat Ali Herbal Products. Journal of Applied Sciences, 15 (7). pp. 999-1005. ISSN 1812-5654 (print); 1812-5662 (online). (Published)

Aini Norhidayah, Mohamed and Jaya Vejayan, Palliah and M. M., Yusoff (2015) Review on Eurycoma longifolia Pharmacological and Phytochemical Properties. Journal of Applied Sciences, 15 (6). pp. 831-844. ISSN 1812-5654. (Published)

Ajiboye, Adeleke Raheem and Ruzaini, Abdullah Arshah and Qin, Hongwu (2015) Using an Enhanced Feed-Forward BP Network for Predictive Model Building From Students’ Data. Intelligent Automation and Soft Computing, 2015. pp. 1-7. ISSN 1079-8587. (Published)

Akbari, Abolghasem and Sedaei, Leila and Mehdi, Naderi and Azizan, Abu Samah and Sedaei, Nazila (2015) The Application of the Water Erosion Prediction Project (WEPP) Model for the Estimation of Runoff and Sediment on a Monthly Time Resolution. Environmental Earth Sciences, 74 (7). pp. 5827-5837. ISSN 1866-6299. (Published)

Akbari, Abolghasem and Sedaei, Nazila and Sedaei, Leila and Cox, Jonathan Peter (2015) Customization of the OSSEM Model for Application to Annual Data from the Talar Aquifer, Northern Iran. Water Science & Technology: Water Supply, 15 (3). pp. 656-666. ISSN 1606-9749. (Published)

Akbari, Sweeta and Nour, A. H. and Fayaz, Fahim (2015) The Influence of Process Parameters on Stability Of Water-In-Crude Oil Emulsion Stabilized by Span 80. International Journal of Engineering Sciences & Research Technology, 4 (5). pp. 526-534. ISSN 2277-9655. (Published)

Akhtar, Muhammad Nadeem and Rasool, Shahid and Rehman, Aziz-ur and Abbasi, Muhammad Athar (2015) Synthesis of N'-Substituted-2-((5-(4-Chlorophenyl)-1,3,4-Oxadiazol-2-ylthio Acetohydrazie Derivatives as Suitable Antibacterial Agents. Tropical Journal of Pharmaceutical Research, 14 (6). pp. 1081-1088. ISSN 1596-5996 (print); 1596-9827 (online). (Published)

Akhtar, Muhammad Nadeem and Rehman, Aziz-ur and Gul, Samreen and Abbasi, Muhammad Athar and Nafeesa, Khadija and Ahmad, Irshad and Afzal, Saira (2015) Synthesis, Structural Analysis and Screening of Some Novel 5-Substituted Aryl/Aralkyl-1,3,4-Oxadiazol-2-Yl 4-(Morpholin-4-Ylsulfonyl)Benzyl Sulfides as Potential Antibacterial Agents. Phosphorus, Sulfur, and Silicon and the Related Elements. ISSN 1042-6507 (print); 1563-5325 (online). (Published)

Akhtar, Muhammad Nadeem and Seema, Zareen and Nurshafika, Sakeh and Gul, Sana and Syed Adnan, Ali Shah and Syahida, Ahmad (2015) Design and Synthesis of Chalcone Derivatives as Potent Tyrosinase Inhibitors and Their Structural Activity Relationship. Journal of Molecular Structure, 1085. pp. 97-1. ISSN 0022-2860. (Published)

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and M. R., Islam (2015) The Effects of Poly Dimethyl Siloxane on Water Absorption and Natural Degradation of Poly(lactic acid)/Oil Palm Empty Fruit Bunch Fiber Biocomposites. Journal of Applied Polymer Science, 132 (45). p. 42784. ISSN 1097-4628. (Published)

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and M. R., Islam (2015) The Effects of Wettability, Shear Strength, and Weibull Characteristics of Fiber-reinforced Poly(lactic acid) Composites. Journal of Polymer Engineering. ISSN 0334-6447 (Print); 2191-0340 (Online). (Published)

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and M. R., Islam and Al Mamun, Abdullah (2015) Preparation and Characterization of Poly(lactic acid)-Based Composites Reinforced with Poly Dimethyl Siloxane/Ultrasound-Treated Oil Palm Empty Fruit Bunch. Polymer-Plastics Technology and Engineering, 54 (13). pp. 1321-1333. ISSN 0360-2559 (Print); 1525-6111 (Online). (Published)

Al-Dabbagh, Jinan B. and Rozman, Mohd Tahar and M., Ishak and Siti Aisyah, Harun (2015) Structural and Phase Formation of TiAl Alloys Synthesized by Mechanical Alloying and Heat Treatment. International Journal Nanoelectronics and Materials, 8. pp. 23-32. ISSN 1985-5761 (print); 2232-1535 (online). (Published)

Alagorni, Abubaker Hamza and Zulkefli, Yaacob and Nour, A. H. (2015) An Overview of Oil Production Stages: Enhanced Oil Recovery Techniques and Nitrogen Injection. International Journal of Environmental Science and Development, 6 (9). pp. 693-701. ISSN 2010-0264. (Published)

Alam, Jahangir and Das, Bipul Chandra and Rahman, Md. Wasikur and Biswas, Biplob Kumar and Khan, Maksudur R. (2015) Removal of Dark Blue-GL from Wastewater using Water Hyacinth: A Study of Equilibrium Adsorption Isotherm. Desalination and Water Treatment, 56 (6). pp. 1520-1525. ISSN 1944-3994. (Published)

Alam, Jahangir and Rahman, Md. Wasikur and Mazid, Russel A. and Khan, Maksudur R. (2015) Gamma-Irradiated Gelatin-Based Films Modified by HEMA for Medical Application. International Journal of Polymer Analysis and Characterization, 20 (5). pp. 426-434. ISSN 1023-666X. (Published)

Alam, Md. Moktadir and Addie Irawan, Hashim and Yee, Yin Tan (2015) Buoyancy Effect Control in Multi Legged Robot Locomotion on Seabed using Integrated Impedance-Fuzzy Logic Approach. Indian Journal of Geo-Marine Sciences (IJMS), 44 (12). pp. 1937-1945. ISSN 0975-1033. (Published)

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, Mustafa M. and Wan Faizal, Wan Ishak and Kamaruddin, Samira A. (2015) An Overview of Photographic Methods in Monitoring Non-Aqueous Phase Liquid Migration in Porous Medium. Special Topics & Reviews in Porous Media, 6 (4). pp. 367-381. ISSN 2151-4798 (print); 2151-562X (online). (Published)

Alginahi, Yasser M. and Mudassar, Mohammed and M. Nomani, Kabir (2015) An Arabic Script Recognition System. KSII Transactions on Internet and Information Systems, 9 (9). pp. 3701-3720. ISSN 1976-7277. (Published)

Ali, Eman N. and Alfarra, Sabreen R. and M. M., Yusoff and Lutfor, M. R. (2015) Environmentally Friendly Biosorbent from Moringa Oleifera Leaves for Water Treatment. International Journal of Environmental Science and Development, 6 (3). pp. 165-169. ISSN 2010-0264. (Published)

Ali, Eman N. and M. Z., Jamaludin (2015) Possibility of Producing Ethanol from Moringa Oleifera Pod Husk. Journal of Advanced Research Design, 5 (1). pp. 1-9. ISSN 2289-7984. (Published)

Ali, Gomaa A. M. and M. M., Yusoff and K. F., Chong (2015) Electrochemical Properties of Electrodeposited MnO2 Nanoparticles. Advanced Materials Research, 1113. pp. 550-553. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Ali, Gomaa A. M. and M. M., Yusoff and Yun, Hau Ng and Hong, Ngee Lim and K. F., Chong (2015) Potentiostatic and Galvanostatic Electrodeposition of Manganese Oxide for Supercapacitor Application: A Comparison Study. Current Applied Physics, 15 (10). pp. 1143-1147. ISSN 1567-1739. (Published)

Ali, Gomaa A. M. and Makhlouf, Salah A. and Chong, Kwok Feng and M. M., Yusoff (2015) Structural and Electrochemical Characteristics of Graphene Nanosheets as Supercapacitor Electrodes. Reviews on Advanced Materials Science, 41 (1). pp. 35-43. ISSN 1605-8127. (Published)

Ali, Gomaa A. M. and Wahba, Osama A.G and Hassan, Ali M. and Fouad, Osama A. and K. F., Chong (2015) Calcium-based Nanosized Mixed Metal Oxides for Supercapacitor Application. Ceramics International, 41 (6). pp. 8230-8234. ISSN 0272-8842. (Published)

Ali, Md. Asraf and Sundaraj, Kenneth and R. Badlishah, Ahmad and Ahamed, Nizam Uddin and Islam, Md. Anamul and Sundaraj, Sebastian (2015) Muscle Fatigue in the Three Heads of the Triceps Brachii During a Controlled Forceful Hand Grip Task with Full Elbow Extension Using Surface Electromyography. Journal of Human Kinetics, 46. pp. 69-76. ISSN 1899-7562. (Published)

Ali, Muna Jalal and Makky, Essam A. and Batool, Tahira and M. M., Yusoff (2015) Susceptibility of Oral Bacteria to Antimicrobial Agents and Virulence Factors. Journal of Chemical and Pharmaceutical Research, 7 (3). pp. 1822-1829. ISSN 0975-7384. (Published)

Ali, Muna Jalal and Makky, Essam A. and M. M., Yusoff (2015) Bacteriological Study on Dental Caries and Test their Sensitivity to Virulence Factors and Heavy Metals. Advances in Environmental Biology, 9 (27). 301-306 . ISSN 1995-0756 (Print); 1998-1066 (Online). (Published)

Ali, Muna Jalal and Makky, Essam A. and M. M., Yusoff (2015) Oral Bacteria: Antimicrobial and Virulence. Journal of Chemical and Pharmaceutical Research, 7 (3). pp. 1816-1821. ISSN 0975-7384 . (Published)

Ali, Mushtaq and Jasni, Mohamad Zain and Mohamad Fadli, Zolkipli and Badshah, Gran (2015) Mobile cloud computing & mobile's battery efficiency approaches: A review. Journal of Theoretical and Applied Information Technology , 79 (1). pp. 153-175. ISSN 1992-8645. (Published)

Ali, Mushtaq and Jasni, Mohamad Zain and Mohamad Fadli, Zolkipli and Gran, Badshah (2015) Taxonomy of Computational Offloading in Mobile Devices. World Applied Sciences Journal, 33 (12). pp. 1798-1805. ISSN 1818-4952. (Published)

Alinejad, T. and Kwong, Q. Bin and Jaya Vejayan, Palliah and Othman, R. Y. and Bhassu, S. (2015) Proteomic Analysis of Differentially Expressed Protein in Hemocytes of Wild Giant Freshwater Prawn Macrobrachium Rosenbergii Infected with Infectious Hypodermal and Hematopoietic Necrosis Virus (IHHNV). Meta Gene, 5 (Sept.). pp. 55-67. ISSN 2214-5400. (Published)

Alsariera, Yazan A. and Mazlina, Abdul Majid and Kamal Z., Zamli (2015) A Bat-inspired Strategy for Pairwise Testing. Journal of Engineering and Applied Sciences, 10 (18). pp. 8500-8506. ISSN 1819-6608. (Published)

Alsewari, Abdulrahman A. and Tairan, Nasser M. and Kamal Z., Zamli (2015) Survey on input output relation based combination test data generation strategies. ARPN Journal of Engineering and Applied Sciences, 10 (18). pp. 8427-8430. ISSN 1819-6608. (Published)

Alsewari, Abdulrahman A. and Tairan, Nasser M. and Kamal Z., Zamli (2015) Survey on input output relation based combination test data generation strategies. ARPN Journal of Engineering and Applied Sciences, 10 (18). pp. 8427-8430. ISSN 1819-6608. (Published)

Alsibai, Mohammad Hayyan and Abdul Manap, Sulastri (2015) A Study on Smart Wheelchair Systems. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 25-35. ISSN 2289-697X. (Published)

Alsibai, Mohammad Hayyan and Hadi, Manap and Abdul Adam, Abdullah (2015) Enhanced Face Recognition Method Performance on Android vs Windows Platform. ARPN Journal of Engineering and Applied Sciences, 10 (23). 17479 -17485 . ISSN 1819-6608. (Published)

Amin, Teyfouri and Milad, Ahmadi and Erfan, Shamsaddini lori and Sorooshian, Shahryar (2015) A Review on Micro Formings. Modern Applied Science, 9 (9). pp. 230-239. ISSN 1913-1844 (printed), 1913-1852 (online). (Published)

Amir, Aziz and R., Mamat and Wan Khairuddin, Wan Ali and Mohd Rozi, Mohd Perang (2015) Review on Typical Ingredients for Ammonium Perchlorate Based Solid Propellant. Applied Mechanics and Materials, 773/74. pp. 470-475. ISSN 1662-7482. (Published)

Amir, Azizi (2015) Evaluation Improvement of Production Productivity Performance using Statistical Process Control, Overall Equipment Efficiency, and Autonomous Maintenance. Procedia Manufacturing, 2. pp. 186-190. ISSN 2351-9789. (Published)

Amir, Azizi and Aikhuele, Daniel O. and Souleman, Fathi S. (2015) A Fuzzy TOPSIS Model to Rank Automotive Suppliers. Procedia Manufacturing, 2. pp. 159-164. ISSN 2351-9789. (Published)

Andalib, Tarnima Warda and Mohd Ridzuan, Darun and Noor Azlinna, Azizan (2015) Western Trends of Human Resources Management: Theories and Practices. International Journal of Industrial Management (IJIM), 1. pp. 1-9. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Ansah, Richard Hannis and Sorooshian, Shahryar and Shariman, Mustafa (2015) Analytic Hierarchy Process Decision Making Algorithm. Global Journal of Pure and Applied Mathematics, 11 (4). pp. 2393-2400. ISSN 0973-1768 (print); 0973-9750 (online). (Published)

Appalasuwami, Sasikala and Jahir Hussain, Fathima Shahitha and K., Kadirgama and Lakshmi, Prema and M. M., Yusoff (2015) Hydroxyethyl Cellulose Stabilized Copper Nanoparticles and its Antibacterial Activity. Journal of Applied Sciences Research, 11 (24). pp. 67-73. ISSN 819-544X (print); 816-157X (online). (Published)

Asan Vernyuy, Wirba and Abdullahi, Abubakar Mas'ud and Firdaus, Muhammad-Sukki and Salman, Ahmad and Razman, Mat Tahar and Ruzairi, Abdul Rahim and Abu Bakar, Munir and Md Ershadul, Karim (2015) Renewable Energy Potentials In Cameroon: Prospects and Challenges. Renewable Energy, 76. pp. 560-565. ISSN 0960-1481. (Published)

Asar, A. K. and Ghalia, Bouhedda (2015) Research in Women's Public Office Positions in Islam. International Journal of Science and Research (IJSR), 4 (10). pp. 2219-2222. ISSN 2319-7064. (Published)

Asmadi, Ali and R. M., Yunus and Mohamad, Awang and Anwar, Johari and Ramli, Mat (2015) Effect of Shear Rate on Characteristics, Performance and Morphology of Polysulfone Blend Membranes. Applied Mechanics and Materials, 699. pp. 305-310. ISSN 1662-7482. (Published)

Asmadi, Ali and R. M., Yunus and Mohamad, Awang and Mohd Azizi, Che Yunus (2015) Influence of Hydrophilic Polymer on Proteins Separation, Molecular Weight Cut-off (MWCO) and Average Pore Size of Polysulfone Blend Membrane. Jurnal Teknologi (Sciences and Engineering), 74 (7). pp. 53-56. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Asmara, Y. P. and Siregar, J. P. and L. H., Shah and Cionita, Tezara (2015) Experimental Investigations On Corrosion Model Of Welded 6061 Aluminum Exposed In NaCl Solution. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2600-2607. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Asnul Hadi, Ahmad and Naher, Sumsun and Brabazon, Dermot (2015) Mechanical Properties of Thixoformed 7075 Feedstock Produced Via The Direct Thermal Method. Key Engineering Materials, 651-53. pp. 1569-1574. ISSN 1662-9795. (Published)

Athirah, Razak and Normy Norfiza, A. Razak and Nurhamim, Ahamad and Fatanah, Suhaimi and Ummu Kulthum, Jamaludin (2015) Virtual Trial And Monte Carlo Analysis Of Model-Based Glycaemic Control Protocol With Reduced Nursing Effort. Jurnal Teknologi (Sciences and Engineering), 77 (7). pp. 55-59. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Atnaw, Samson M. and Kulkarni, R. R. (2015) Application of Computer Aided Process Planning in Manufacturing Industries. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 52-65. ISSN 2289-697X. (Published)

Aufa, Zin and Kamarul Hawari, Ghazali and Norliana, Khamisan (2015) Thermal Detection of Water Saturation Spots For Landslide Prediction. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17114-17119. ISSN 1819-6608. (Published)

Awanis, Romli and Prickett, Paul and Setchi, Rossitza and Soe, Shwe (2015) Integrated Eco-design Decision-making for Sustainable Product Development. International Journal of Production Research, 53 (2). pp. 1-24. ISSN 0020-7543 (Print), 1366-588X (Online). (Published)

Ayesha, Noor and Yuserrie, Zainuddin (2015) Effect of Job Dissatisfaction on Employee Turnover in the Palm Oil Industry of Malaysia. International Journal of Industrial Management (IJIM), 1. pp. 1-7. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Ayodele, Bamidele V. and Cheng, C. K. (2015) Modelling and Optimization of Syngas Production from Methane Dry Reforming Over Ceria-Supported Cobalt Catalyst Using Artificial Neural Networks and Box–Behnken Design. Journal of Industrial and Engineering Chemistry, 32. pp. 246-258. ISSN 1226-086X. (Published)

Ayodele, Bamidele V. and Cheng, C. K. (2015) Process Modelling, Thermodynamic Analysis and Optimization of Dry Reforming, Partial Oxidation and Auto-Thermal Methane Reforming for Hydrogen and Syngas Production. Chemical Product and Process Modeling, 10 (4). pp. 211-220. ISSN 2194-6159 (print); 1934-2659 (online). (Published)

Ayodele, Bamidele V. and Khan, Maksudur R. and Cheng, C. K. (2015) Syngas Production from CO2 Reforming of Methane Over Ceria Supported Cobalt Catalyst: Effects of Reactants Partial Pressure. Journal of Natural Gas Science and Engineering. pp. 1-8. ISSN 1875-5100. (In Press / Online First) (In Press / Online First)

Azhar, Fakharuddin and Palma, Alessandro L. and Giacomo, Francesco Di and Casaluci, Simone and Matteocci, Fabio and Wali, Qamar and Rauf, Muhammad and Carlo, Aldo Di and Brown, Thomas M. and Rajan, Jose (2015) Solid State Perovskite Solar Modules by Vacuum-vapor Assisted Sequential Deposition on Nd:YVO4 Laser Patterned Rutile TiO2 Nanorods. Nanotechnology, 26. 494002 . ISSN 09574484. (Published)

Azhar, Fakharuddin and Rajan, Jose and Francesco, Di Giacomo and Alessandro, L. Palma and Fabio, Matteocci and Irfan, Ahmed and Stefano, Razza and Alessandra, D'Epifanio and Silvia, Licoccia and Jamil, Ismail and Aldo, Di Carlo and Thomas, M. Brown (2015) Vertical TiO2 Nanorods as a Medium for Durable and High Efficiency Perovskite Solar Modules. ACS Nano, 9 (8). pp. 8420-8429. ISSN 1936-0851. (Published)

Azrag, M. A. K. and Tuty Asmawaty, Abdul Kadir and Jaber, Aqeel S. and Odili, Julius Beneoluchi (2015) Large-scale Kinetic Parameter Identification of Metabolic Network Model of E. coli using PSO. Advances in Bioscience and Biotechnology, 6 (2). pp. 120-130. ISSN 2156-8456 (print); 2156-8502 (online). (Published)

Azrina, Abd Aziz and Shaliza, Ibrahim and Pichiah, Saravanan (2015) Nanocrystal TiO2 Engulfed SiO2-Barium Hexaferrite for Enhanced Electrons Mobility and Solar Harvesting Potential. Materials Science Forum, 819. pp. 226-231. ISSN 1662-9752. (Published)

Azwin Arif, Abdul Rahim and Aliff, Nawi and Mohd Isa, Hamzah (2015) Teachers Acceptance Of Mobile Learning For Teaching And Learning In Islamic Education: A Preliminary Study. Turkish Online Journal of Distance Education, 16 (1). pp. 184-192. ISSN 1302-6488. (Published)

Barudin, Mohd Aiman and Mohd Hairul, Ab. Rahim and Tan, Suat Hian (2015) Identification of Fragrance-Related Transcripts from Selected Orchids Using cDNA Representational Difference Analysis (cDNA-RDA) Approach. International Journal of Interdisciplinary and Multidisciplinary Studies, 2 (4). pp. 198-207. ISSN 2348 – 0343. (Published)

Barudin, Mohd Aiman and Mohd Hairul, Ab. Rahim and Tan, Suat Hian (2015) Sequence Analysis of New Isolated O-methyltransferase Transcript (VMPOMT) from Vanda Mimi Palmer. Scholars Academic Journal of Biosciences (SAJB), 3 (3). pp. 239-247. ISSN 2321-6883 (Online); 2347-9515 (Print). (Published)

Bastian Wibar, Momang and N. M. Zuki, N. M. (2015) Development Concept of A Portable Quality-Confirmation Inspection Device for Automotive Body Parts. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2738-2746. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Batool, Tahira and Chia, Vi Vien and Makky, Essam A. and Nina Suhaity, Azmi and Mashitah, Mohd Yusoff (2015) Production and optimization of l-asparaginase by e.coli atcc10536 from food waste. Journal of Chemical and Pharmaceutical Research, 7 (10). pp. 394-401. ISSN 0975-7384. (Published)

Beg, M. D. H. and Akindoyo, John Olabode and Suriati, Ghazali and Abdullah, A. Mamun (2015) Impact Modified Oil Palm Empty Fruit Bunch Fiber/Poly(Lactic) Acid Composite. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 9 (1). pp. 165-170. (Published)

Beg, M. D. H. and Alam, A. K. M. Moshiul and Mina, M. F. and Mamun, A. A. and Bledzki, A. K. (2015) Degradation And Stability Of Green Composites Fabricated From Oil Palm Empty Fruit Bunch Fiber And Polylactic Acid: Effect Of Fiber Length. Journal of Composite Materials. ISSN 0021-9983 (print); 1530-793X (online). (Published)

Beg, M. D. H. and Alam, A. K. M. Moshiul and R. M., Yunus and Mina, M. F. (2015) Improvement of Interaction between Pre-dispersed Multi Walled Carbon Nanotubes and Unsaturated Polyester Resin. Journal of Nanoparticle Research, 17 (1). p. 53. ISSN 1388-0764 (print), 1572-896X (online). (Published)

Beg, M. D. H. and M. R., Islam and Gupta, Arun and Rivai, M. (2015) Characterization Of Ultrasound-Treated Oil Palm Empty Fruit Bunch-Glass Fiber-Recycled Polypropylene Hybrid Composites. Journal of Polymer Engineering, 35 (2). pp. 135-143. ISSN 2191-0340. (Published)

Beg, M. D. H. and R. M., Yunus and Ridzuan, Ramli and Norhafzan, Junadi (2015) Microcrystalline Cellulose (MCC) from Oil Palm Empty Fruit Bunch (EFB) Fiber via Simultaneous Ultrasonic and Alkali Treatment. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 9 (1). pp. 8-11. ISSN 2010-3778. (Published)

Beg, M. D. H. and Shaharuddin, Kormin and Mohd Bijarimi, Mat Piah and Haydar, U. Zaman (2015) Effects of Different Starch Types on the Physico-Mechanical and Morphological Properties of Low Density Polyethylene Composites. Journal of Polymer Engineering, 35 (8). pp. 793-804. ISSN 2191-0340. (Published)

Beg, M. D. H. and Shaharuddin, Kormin and Mohd Bijarimi, Mat Piah and Haydar, U. Zaman (2015) Environmentally Degradable Sago Starch Filled Low-density Polyethylene. Journal of Polymer Engineering, 35 (6). pp. 551-563. ISSN 2191-0340. (Published)

Beg, M. D. H. and Zaman, Haydar U. (2015) Improvement of Physico-Mechanical, Thermomechanical, Thermal and Degradation Properties of PCL/Gelatin Biocomposites: Effect of Gamma Radiation. Radiation Physics and Chemistry, 109. pp. 73-82. ISSN 0969-806X. (Published)

Benraghda, Abdelmadjid and Zuraina, Ali and Noor Raha, Mohd Radzuan (2015) An Analysis of Beliefs among UMP International Students towards English Oral Presentation “Pilot Study". International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-3. ISSN 2289-697X. (Published)

Benraghda, Abdelmadjid and Zuraina, Ali and Noor Raha, Mohd Radzuan (2015) Attitudes among International University Students in Delivering English Oral Presentation in Academic Settings. International Journal of English and Education, 4 (1). pp. 280-287. ISSN 2278-4012. (Published)

Billy, Anak Sup and Mohd Farid, Zainudin and Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming (2015) Effect of Rim Angle to the Flux Distribution Diameter in Solar Parabolic Dish Collector. Energy Procedia, 68. pp. 45-52. ISSN 1876-6102 . (Published)

Butt, Saad Masood and Mazlina, Abdul Majid and Yaqoob, Lubna (2015) Review Paper on the Importance of Usability in Agile Software Development. Durreesamin Journal, 1 (2). pp. 1-5. ISSN 2204-9827. (Published)

C. L., Hoo and Sallehuddin, Mohamed Haris and Edwin, C.Y. Chung and Nik Abdullah, Nik Mohamed (2015) New Integral Antiwindup Scheme for PI Motor Speed Control. Asian Journal of Control, 17 (6). pp. 2115-2132. ISSN 1934-6093. (Published)

Cacciapuoti, Angela Sara and Caleffi, Marcello and Paura, Luigi and Rahman, Md. Arafatur (2015) Channel Availability for Mobile Cognitive Radio Networks. Journal of Network and Computer Applications, 47. pp. 131-136. ISSN 1084-8045. (Published)

Chan, Fong Shiew and Nurul, Shamsinar and Nurul Izwanie, Rasli and Syed Mohd Saufi, Tuan Chik (2015) Multiple Interactions Mixed Matrix Membrane Chromatography Using Anion and Cation Exchanger Resin for Whey Protein Fractionation. Jurnal Teknologi (Sciences and Engineering), 75 (1). pp. 259-263. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Che Mohammad Nizam, Che Kamaruddin and Ahmad Rasdan, Ismail and Ong, Pit Wah and Ahmad Fauzi, Awang and Rosnizawati, Bharom (2015) The effects muscle activities at constant illuminance with multiple temperatures for rubber scrap industries. International Journal of Current Research and Academic Review (Special-2). pp. 49-55. ISSN 2347-3215. (Published)

Chee, Wai Woon and Huei, Ruey Ong and K. F., Chong and Khan, Maksudur R. (2015) MnO2/CNT as ORR Electrocatalyst in Air-Cathode Microbial Fuel Cells. Procedia Chemistry, 16. pp. 640-647. ISSN 1876-6196. (Published)

Chee, Wai Woon and Jia, Han Lim and Huei, Ruey Ong and Khan, Maksudur R. (2015) Simultaneous Power Generation and Wastewater Treatment by Using Air-Cathode Single Chamber Microbial Fuel Cell. International Journal of Material Science Innovations (IJMSI), 3 (1). pp. 33-41. ISSN 2289-4063. (Published)

Chen, Chee Lek and Sunarti, Abd Rahman (2015) Formulation of Mixed-Matrix Membrane (PSF/Zeolite) for CO2/N2 Separation: Screening of Polymer Concentration. Journal of Materials Science and Chemical Engineering, 3 (5). pp. 1-10. ISSN 2327-6045 (print); 2327-6053 (online). (Published)

Cheng, C. K. and Kong, Zi Ying and Khan, Maksudur R. (2015) Photocatalytic-Fenton Degradation of Glycerol Solution over Visible Light-Responsive CuFe2O4. Water, Air and Soil Pollution, 226 (327). pp. 1-12. ISSN 0049-6979 (print); 1573-2932 (online). (Published)

Cheng, C. K. and Mohd Rizauddin, Deraman and Khan, Maksudur R. (2015) Evaluation of the Photocatalytic Degradation of Pre-Treated Palm Oil Mill Effluent (POME) Over Pt-Loaded Titania. Journal of Environmental Chemical Engineering. pp. 1-10. ISSN 2213-3437. (Published)

Chi, Shein Hong and Chin, S. Y. and Cheng, C. K. and Mohd Sabri, Mahmud and Chua, Gek Kee (2015) Enzymatic Conversion of Glycerol to Glyceric Acid with Immobilised Laccase in Na-Alginate Matrix. Procedia Chemistry, 16. pp. 632-639. ISSN 1876-6196. (Published)

Chin, S. Y. and Haniif, Prasetiawan and Anwaruddin, Hisyam and Abdullah, Azahari and Ikmal Hisham, Maharon (2015) Sensitivity Study of the Propane Dehydrogenation Process in an Industrial Radial Moving Bed Reactor. Journal of Engineering Science and Technology, 2 (1). pp. 62-74. ISSN 1823-4690. (Published)

Chin, S. Y. and M. A. A., Ahmad and M. R., Kamaruzaman and Cheng, C. K. (2015) Kinetic Studies of the Esterification of Pure and Dilute Acrylic Acid with 2-ethyl Hexanol Catalysed by Amberlyst 15. Chemical Engineering Science, 129. p. 116. ISSN 0009-2509. (Published)

Choo, Wei Chun and Nina Farhana, Mohd Jamaludin and N., Zainol (2015) Optimization Of Biogas Production From Poultry Manure Wastewater In 250 Ml Flasks. Jurnal Teknologi (Sciences and Engineering), 75 (1). pp. 275-285. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Choon, Lih Hoo and Sallehuddin, Mohamed Haris and Edwin Chin, Yau Chung and Nik Abdullah, Nik Mohamed (2015) Steady-State Integral Proportional Integral Controller for PI Motor Speed Controllers. Journal of Power Electronics, 15 (1). pp. 177-189. ISSN 1598-2092. (Published)

Chowdhury, M. N. K. and Ahmad Fauzi, Ismail and Beg, M. D. H. and Hegde, Gurumurthy and Gohari, Rasoul Jamshidi (2015) Polyvinyl Alcohol/polysaccharide Hydrogel Graft Materials for Arsenic and Heavy Metal Removal. New Journal of Chemistry, 39 (7). pp. 5823-5832. ISSN 1144-0546. (Published)

Chowdhury, M. N. K. and Ahmad Fauzi, Ismail and Khan, Maksudur R. and Beg, M. D. H. and Mohd Hafiz Dzarfan, Othman and Gohari, Rasoul Jamshidi and Moslehyani, Ali (2015) Physicochemical and Micromechanical Investigation of a Nanocopper Impregnated Fibre Reinforced Nanocomposite. RSC Advances, 5 (122). pp. 100943-100955. ISSN 2046-2069. (Published)

Chua, Gek Kee and Nur Anis, Saarani (2015) Screening and Optimising Metal Salt Concentration for Harvesting Nannochloropsis Sp. by Flocculation. Journal of Engineering and Technology, 6 (2). pp. 109-120. ISSN 2180-3811 (print); 2289-814X (online). (Published)

D., Ramasamy and K., Kadirgama and M. M., Rahman and Z. A., Zainal (2015) Analysis of Compressed Natural Gas Burn Rate and Flame Propagation on a Sub-Compact Vehicle Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2405-2416. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Dzulqarnain, Abu Bakar and Norazura, Ismail (2015) Integral Safety Needs Analysis towards Optimizing Safety Performance in Malaysian-Based Multinational Pipe Coating Industry. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 69-80. ISSN 2289-697X. (Published)

E., Baranitharan and Khan, Maksudur R. and D. M. R., Prasad and Wee, Fei Aaron Teo and Geok, Yuan Annie Tan and Rajan, Jose (2015) Effect of Biofilm Formation on the Performance of Microbial Fuel Cell for the Treatment of Palm Oil Mill Effluent. Bioprocess and Biosystems Engineering, 38 (1). pp. 15-24. ISSN 1615-7591 (print); 1615-7605 (online). (Published)

E. A., Aziz and W. A., Wan Omar and N. A., Zainordin (2015) The Environmental Fate of Natural and Synthetic Oestrogens; Comparison between Prediction Tools and Experimental Values. International Journal of Environmental Science and Development, 6 (7). pp. 526-529. ISSN 2010-0264. (Published)

Ekhlas, Mhawi and Hamdan, Daniyal and Mohd Herwan, Sulaiman (2015) Advanced Techniques in Harmonic Suppression via Active Power Filter: A Review. International Journal of Power Electronics and Drive System (IJPEDS), 6 (2). pp. 185-195. ISSN 2088-8694 (print); 2088-8694 (online). (Published)

Elhussein, Salah Ahmed and Mabubu, Juma Ibrahim and Osman, Nour Ahmed and Hua, Hongxia (2015) Evaluation of Antimalarial Activity of Sesquiterpene Lactones of Wild Sudanese Basil (Ocimum basilicum L.) through their in vitro Inhibition of Dihydrofolate Reductase (DHFR). Journal of Biology, Agriculture and Healthcare, 5 (1). pp. 21-27. ISSN 2224-3208 (print); 2225-093X (online). (Published)

Ellie Yi, Lih Teo and Hong, Ngee Lim and Rajan, Jose and K. F., Chong (2015) Aminopyrene Functionalized Reduced Graphene Oxide as a Supercapacitor Electrode. RSC Advances, 5 (48). pp. 38111-38116. ISSN 2046-2069. (Published)

Emyra Ezzaty, Masiren and Noorlisa, Harun and W. H. W., Ibrahim and Fatmawati, Adam (2015) Effect of Temperature on Diffusivity of Monoethanolamine (MEA) on Absorption Process for CO2 Capture. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 43-51. ISSN 2289-697X. (Published)

F., Basrawi and Hassan, Ibrahim and Yamada, Takanobu (2015) Optimal Unit Sizing of Biogas-Fuelled Micro Gas Turbine Cogeneration Systems in a Sewage Treatment Plant. Energy Procedia, 75. pp. 1052-1058. ISSN 1876-6102 . (Published)

F., Basrawi and K., Habib and Hassan, Ibrahim and Lee, Giok Chui (2015) Effect of Solar Fraction on the Economic Performance of a Solar Air Conditioning by an Adsorption Chiller. Jurnal Intelek, 9 (2). pp. 14-20. ISSN 2231-7716. (Published)

F., Basrawi and Thamir K., Ibrahim and Giok, Chui Lee and Khairul, Habib and Hassan, Ibrahim (2015) Effect of Solar Fraction on the Economic and Environmental Performance of Solar Air-Conditioning by Adsorption Chiller in a Tropical Region. Journal of Solar Energy Engineering, 137 (6). 061009-1. ISSN 0199-6231 (print); 1528-8986 (online). (Published)

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and Zahari, Taha and K., Kadirgama and Nasrul Hadi, Johari (2015) The Investigation of Mechanical Properties on Natural Fiber Composites for Recurve Bow Material Selection. Advances in Environmental Biology, 9 (25). pp. 27-31. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Mohd Warid, Hussin (2015) Effect of Curing Regime on Compressive Strength of Aerated Concrete Containing Palm Oil Fuel Ash as Partial Sand Replacement. Concrete Research Letters, 6 (2). pp. 54-59. ISSN 2180-1371. (Published)

Farhan, Mohd Said (2015) Development of Simvastatin Production by Monascus Purpureus In Solid-State Fermentation Using Agricultural Product. Journal of Engineering and Technology, 6 (2). pp. 18-28. ISSN 2180-3811. (Published)

Faridah, Taju Rahim and Yuserrie, Zainuddin (2015) Study on the Impact of Technological Innovation Capabilities on Competitive Advantage and Firm Performance in the Automotive Industry in Malaysia: A Conceptual Framework. Journal of Scienctific Research & Development, 2 (13). pp. 194-202. ISSN 1115-7569. (Published)

Fatanah, M. Suhaimi and Chase, J. Geoffrey and Pretty, G. Christopher and Shaw, M. Geoffrey and Normy Norfiza, A. Razak and Ummu Kulthum, Jamaludin (2015) Insulin Sensitivity as a Model-Based Marker for Sepsis Diagnosis. IFAC-PapersOnLine, 48 (20). pp. 372-376. ISSN 2405-8963. (Published)

Fatchurrohman, Nanang and Suraya, Sulaiman and S. M., Sapuan and M. K. A., Ariffin and B. T. H. T., Baharuddin (2015) Analysis of a Metal Matrix Composites Automotive Component. International Journal of Automotive and Mechanical Engineering (IJAME), 11 (June). pp. 2531-2540. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Fazlul Rahman, Mohd Yunus and Ruzairi, Abdul Rahim and Leow, Pei Ling and Nor Muzakkir, Nor Ayob and Yasmin, Abdul Wahab and Suzanna, Ridzuan Aw and Anita, Ahmad and Nasarudin, Ahmad and Mohd Hafiz, Fazalul Rahiman (2015) Simulation of Electrode for Dual-Modality Electrical Resistance Tomography and Ultrasonic Transmission Tomography for Imaging Two-Phase Liquid and Gas. Jurnal Teknologi (Sciences and Engineering), 77 (17). pp. 55-61. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

G., Najafi and B., Ghobadian and Talal, Yusaf and Seyed Mohammad, Safieddin Ardebili and R., Mamat (2015) Optimization of Performance and Exhaust Emission Parameters of a SI (Spark Ignition) Engine with Gasoline–ethanol Blended Fuels using Response Surface Methodology. Energy, 90 (Prt 2.). pp. 1815-1829. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Gaanty Pragas, Maniam and Noor, Hindryawati and Irma, Nurfitri and Intan Shafinaz, Abd Manaf and Neshabran, Ramachandran and Mohd Hasbi, Ab. Rahim (2015) Utilization of Waste Fat from Catfish (Pangasius) in Methyl Esters Preparation Using Cao Derived from Waste Marine Barnacle and Bivalve Clam as Solid Catalysts. Journal of the Taiwan Institute of Chemical Engineers, 49. pp. 58-66. ISSN 1876-1070. (Published)

Gan, Leong Ming and Law, Hoon Chit and R. A., Bakar (2015) Development of a Briquetting Facility with the Integration of a Hydraulic System for Biomass Densification. Energy and Sustainability V: Special Contributions, 206. pp. 335-345. ISSN 1743-3541. (Published)

Gan, Siew Mei and Zynia, Fernandes Pearl and A. R., Yuvaraj and Lutfor, M. R. and Hegde, Gurumurthy (2015) Polarity Dependent Photoisomerization of Ether Substituted Azodyes: Synthesis and Photoswitching Behavior. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 149. pp. 875-880. ISSN 1386-1425 (print); 1873-3557 (online). (Published)

Geraldine Chan, Sue Ching and Willy Wong, Xiu Fa and Chong, Fui Chin (2015) Immobilization of Hepatitis B Antibody Onto the Reduced Graphene Oxide. Jurnal Teknologi (Sciences and Engineering), 77 (31). pp. 25-29. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Gesang, Nugroho and Zahari, Taha and Tedy, Setya Nugraha and Hatyo, Hadsanggeni (2015) Development of a Fixed Wing Unmanned Aerial Vehicle (UAV) for Disaster Area Monitoring and Mapping. Journal of Mechatronics, Electrical Power, and Vehicular Technology, 6 (2). pp. 83-88. ISSN 2087-3379. (Published)

Ghafar, Hany H. Abdel and Ali, Gomaa A. M. and Fouad, Osama A. and Makhlouf, Salah A. (2015) Enhancement of Adsorption Efficiency of Methylene Blue on Co3O4/SiO2 Nanocomposite. Desalination and Water Treatment, 53 (11). pp. 2980-2989. ISSN 1944-3994. (Published)

Gholipour, Amir and Akbari, Abolghasem (2015) Sensitivity Analysis of Wastewater Flow Quality in A Channel Under The Influence of Hydraulic Retention Time Variations. International Journal of Civil Engineering and Geo-Environmental, 6 (1). pp. 1-5. ISSN 2180-2742. (Published)

Gisen, J. I. A. and Savenije, H. H. G. (2015) Estimating Bankfull Discharge and Depth in Ungauged Estuaries. Water Resources Research, 51 (4). pp. 2298-2316. ISSN 1944-7973. (Published)

Gisen, J. I. A. and Savenije, H. H. G. and Nijzink, R. C. (2015) Revised Predictive Equations for Salt Intrusion Modelling in Estuaries. Hydrology and Earth System Sciences, 19. pp. 2791-2830. ISSN 1027-5606. (Published)

Gouda, Gamal A. and Ali, Gomaa A. M. and Elnasr, Tarek A. Seaf (2015) Stability Studies of Selected Metal Ions Chelates with 2-(4-amino-1,5- dimethyl-2-phenyl-1,2-dihydro-pyrazol-3-ylideneamino) Phenol. International Journal of Nanomaterials and Chemistry, 1 (2). pp. 39-44. ISSN 2090-9578 (Print); 2090-9586 (Online). (Published)

Gran, Badshah and Liew, Siau-Chuin and Jasni, Mohamad Zain and Syifak Izhar, Hisham and Amatul, Zehra (2015) Importance of Watermark Lossless Compression in Digital Medical Image Watermarking. Research Journal of Recent Sciences, 4 (3). pp. 75-79. ISSN 2277-2502. (Published)

Gupta, Arun and Tanveer, Ahmad Khan and Saidatul Shima, Jamari and Rajan, Jose (2015) Examination of Selected Synthesis Parameters for Composite Adhesive-type Urea-Formaldehyde/activated Carbon Adhesives. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-6. ISSN 2289-697X. (Published)

Hadi, Manap and Lewis, Elfed (2015) The Interference Study of Green-House Gases for an Ammonia Sensor. Applied Mechanics and Materials, 704. pp. 244-247. ISSN 1662-7482. (Published)

Hafizoah, Kassim and Najah, Osman and Aziman, Abdullah (2015) Creative strategy : A pilot evaluation of a hypothetical learning model through public speaking performance. Procedia Social and Behavioral Sciences, 171 (2015). pp. 919-928. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Hagos, F. Y. and A. R. A., Aziz and S. A., Sulaiman (2015) Investigation Of Deposit Formation In Direct-Injection Spark-Ignition Engine Powered On Syngas. International Journal of Automotive Technology (IJAT), 16 (3). pp. 479-485. ISSN 1229-9138 (print);1976-3832 (online). (Published)

Hagos, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman (2015) Methane Enrichment of Syngas (H2/CO) in a Spark-ignition Direct-injection Engine: Combustion, Performance and Emissions Comparison With Syngas and Compressed Natural Gas. Energy, 90 (Prt. 2). pp. 2006-2015. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Hamidah, Abdullah and Khan, Maksudur R. and Manoj, Pudukudya and Zahira, Yaakob and Nur Aminatulmimi, Ismail (2015) CeO2-TiO2 as a Visible Light Active Catalyst for the Photoreduction of CO2 to Methanol. Journal of Rare Earths, 33 (11). pp. 1155-1161. ISSN 1002-0721. (Published)

Hamzah, Ahmad and Nur Aqilah, Othman (2015) The Impact of Cross-Correlation on Mobile Robot Localization. International Journal of Control, Automation and Systems, 13 (5). pp. 1251-1261. ISSN 1598-6446. (Published)

Hamzah, Ahmad and Nur Aqilah, Othman and Namerikawa, Toru (2015) Sufficient Condition for Estimation in Designing H∞ Filter-Based SLAM. Mathematical Problems in Engineering, 2015. pp. 1-14. ISSN 1024-123X (print); 1563-5147 (online). (Published)

Hamzah, Ahmad and Siti Nur Aini, Basiran (2015) Fuzzy logic based vehicle speed control performance considering different membership types. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9773-9778. ISSN 1819-6608. (Published)

Hamzeh Taha, Alkasasbeh and Mohd Zuki, Salleh and Razman, Mat Tahar and Roslinda, Nazar (2015) Effect of Radiation and Magnetohydrodynamic Free Convection Boundary Layer Flow on a Solid Sphere with Convective Boundary Conditions. Walailak Journal of Science and Technology (WJST), 12 (9). pp. 849-861. ISSN 686-3933 (print); 2228-835X (online). (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2015) Effect of Cooling and Isothermal Aging on Microstructure Using Electroless Nickel (Boron) Plating. Applied Mechanics and Materials, 695. pp. 352-356. ISSN 1662-7482. (Published)

Hariri, Hilwani and Hasnah, Haron and Patel, Chris (2015) Factors Influencing the Independence of Government Auditors. Journal of Problems and Perspectives in Management, 13 (2 (sp)). pp. 380-388. ISSN 1727-7051. (Published)

Haris, Hassanal and Jahir Hussain, Fathima Shahitha and K., Kadirgama and M. M., Yusoff (2015) Crystallization, Characterization, & Application of Hydroxyl Apatite on Hydroxyl Ethyl Cellulose in the Present of Stimulated Body Fluid Solution (SBF). Australian Journal of Basic and Applied Sciences, 9 (37). pp. 185-190. ISSN 19918178. (Published)

Hasan, Mohammed M. and M., Ishak and M. R. M., Rejab (2015) A Simplified Design of Clamping System and Fixtures for Friction Stir Welding of Aluminium Alloys. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1628-1639. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Hasnah, Haron and Ishak, Ismail and Aw, Lo Na (2015) The Effect of Moral Reasoning, Exposure to Ethics and Perceived Ethical Climate on Ethical Judgement of Auditors in Malaysia. Asian Journal of Business and Accounting, 8 (2). pp. 25-65. ISSN 1985-4064. (Published)

Hazim, Sharudin and Nik Rosli, Abdullah and A. M. I., Mamat and Obed M., Ali and R., Mamat (2015) An Overview of Spark Ignition Engine Operating on Lower-Higher Molecular Mass Alcohol Blended Gasoline Fuels. Jurnal Teknologi (Sciences and Engineering), 76 (5). pp. 101-105. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Hazrulrizawati, Hamid and M. M., Yusoff and M., Liu and M. R., Karim (2015) α-Glucosidase and α-amylase Inhibitory Constituents of Tinospora crispa: Isolation and Chemical Profile Confirmation by Ultra-high Performance Liquid Chromatography-quadrupole Time-of-flight/mass spectrometry. Journal of Functional Foods, 16. pp. 74-80. ISSN 1756-4646. (Published)

He, Yu Hai and Ahmad Ziad, Sulaiman and Azilah, Ajit (2015) Effect of Ultrasound and Enzyme on The Extraction of Eurycoma Longifolia (Tongkat Ali). International Journal of Chemical and Molecular Engineering, 9 (4). pp. 1-21. (Published)

Hegde, Gurumurthy and A. R., Yuvaraj and Wan, Sinn Yam and Tze, Nee Chan and Yit, Peng Goh (2015) New Para-substituted Non-symmetric Isoflavones for Their Fast Photo-switching Ability: Synthesis and Their Liquid Crystal Characterization. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 135. pp. 1115-1122. ISSN 1386-1425 (print); 1873-3557 (online). (Published)

Hegde, Gurumurthy and A. R., Yuvaraj and Wan, Sinn Yam and Tze, Nee Chan and Yit, Peng Goh (2015) New Para-substituted Non-symmetric Isoflavones for their Fast Photo-switching Ability: Synthesis and their Liquid Crystal Characterization. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 135. pp. 1115-1122. ISSN 1386-1425 (print); 1873-3557 (online). (Published)

Hegde, Gurumurthy and Pearl Zynia, Fernandes and A. R., Yuvaraj and Gan, Siew Mei and Lutfor, M. R. and M. M., Yusoff (2015) Light Sensitive Molecule for Photonic Devices. Polymer Science & Technology General , 353 (1). (Published)

Hegde, Gurumurthy and Shoriya Aruni, Abdul Manaf and Kumar, Anuj and Ali, Gomaa A. M. and K. F., Chong and Zainab, Ngaini and K. V., Sharma (2015) Biowaste Sago Bark Based Catalyst Free Carbon Nanospheres: Waste to Wealth Approach. ACS Sustainable Chemistry & Engineering, 3 (9). pp. 2247-2253. ISSN 2168-0485. (Published)

Hegde, Gurumurthy and Yuvaraj, A. R. and Wan, Sinn Yam and M. M., Yusoff (2015) Fast Photoswitching Azo Dyes. Polymer Science & Technology General, 353 (1). (Published)

Hesami, Majid and Gupta, Arun and Jaafar, Abdullah and Avazpour, Mahrokh (2015) Effect of Electron Radiations on the Physical Properties of Laminated Particle Boards. Asian Journal of Applied Sciences, 3 (2). pp. 324-331. ISSN 2321–0893. (Published)

Hiew, Thong yap and Ngien, S. K. (2015) Analysis of Flow Characteristics in Sewerage System. Applied Mechanics and Materials, 802. pp. 599-604. ISSN 1662-7482. (Published)

Hojjat, Damirchi and G., Najafi and Siamak, Alizadehnia and B., Ghobadian and Talal, Yusaf and R., Mamat (2015) Design, Fabrication and Evaluation of Gamma-Type Stirling Engine to Produce Electricity from Biomass for the Micro-CHP System. Energy Procedia, 75. pp. 137-143. ISSN 1876-6102. (Published)

Hong, Mee Song and M. H., Sulaiman and Mohd Rusllim, Mohamed (2015) An Application of Flower Pollination Algorithm to Solve Combined Economic Emission Dispatch by Considering Valve-point Loading Effect. International Review on Modelling and Simulations (I.R.E.M.O.S), 8 (4). pp. 427-435. ISSN 1974-9821. (Published)

Hong, Mee Song and Wan Ismail, Ibrahim and Nor Rul Hasma, Abdullah (2015) Optimal Load Frequency Control in Single Area Power System Using Pid Controller Based on Bacterial Foraging & Particle Swarm Optimization. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 10733-10739. ISSN 1819-6608. (Published)

Hossain, Mokarram and Amin, A. F. M. S. and M. Nomani, Kabir (2015) Eight-Chain and Full-Network Models and Their Modified Versions for Rubber Hyperelasticity: A Comparative Study. Journal of the Mechanical Behavior of Materials, 24 (1-2). pp. 11-24. ISSN 0334-8938. (Published)

Huei, Ruey Ong and Khan, Maksudur R. and Ridzuan, Ramli and Yonghua, Du and Shibo, Xi and R. M., Yunus (2015) Facile Synthesis of Copper Nanoparticles in Glycerol at Room Temperature: Formation Mechanism. RSC Advances, 5 (31). pp. 24544-24549. ISSN 2046-2069. (Published)

Huei, Ruey Ong and Khan, Maksudur R. and Yousuf, Abu and Nor Amalina, Hussain and Cheng, C. K. (2015) Synthesis and Characterization of a CaFe2O4 Catalyst for Oleic Acid Esterification. RSC Advances, 121 (5). pp. 100362-100368. ISSN 2046-2069. (Published)

Hussain K., Khaleaf and Kamarul Hawari, Ghazali and Mithaq Na'ma, Raheema and Abdalla, Ahmed N. (2015) A New Approach in a Gray-Level Image Contrast Enhancement by using Fuzzy Logic Technique. International Journal of Scientific Research in Science, Engineering and Technology, 1 (1). pp. 19-23. ISSN 2395-1990. (Published)

Hussanan, Abid and Mohd Zuki, Salleh and Khan, Ilyas and Razman, Mat Tahar and Zulkhibri, Ismail (2015) Soret Effects on Unsteady Magnetohydrodynamic Mixed-convection Heat-and-mass-transfer Flow in a Porous Medium with Newtonian Heating. Maejo International Journal of Science and Technology, 9 (02). pp. 224-245. ISSN 1905-7873. (Published)

Ibrahim, Tamir K. and M. M., Rahman (2015) Effects of Isentropic Efficiencies on the Performance of Combined Cycle Power Plants. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2914-2928. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ida Rizyani, Tahir and Junaidu, Abubakar Sambo and Bashir, Muktar (2015) The Role of Quality Assurance in Pahang Halal Food Industry in Malaysia. Journal of Business Administration and Management Sciences Research , 4 (3). 060-068. ISSN 2315-8727. (Published)

Iftikhar, Ahmad and Noor Raha, Mohd Radzuan (2015) EFL Teacher Perceptions of Error Correction in Grammar Teaching: A Case Study. International Journal of Language Education and Applied Linguistics (IJLEAL), 3. pp. 37-50. ISSN 2289-7208 (print); 2289-9294 (online). (Published)

Ilva, Arashnia and G., Najafi and B., Ghobadian and Talal, Yusaf and R., Mamat and Maurice, Kettner (2015) Development of Micro-scale Biomass-fuelled CHP System Using Stirling Engine. Energy Procedia, 75. pp. 1108-1113. ISSN 1876-6102 . (Published)

Imaduddin, Abidin and Mohd Rashid, Ab Hamid and Yap, Chui Yan and Ida Rizyani, Tahir and Norlida, Ramli (2015) University-Industry Collaboration (UIC) and the Resources-Based View (RBV). International Journal of Advanced Research in Business, 1 (2). pp. 2-6. (Published)

Intan Suhana, Mohd Razelan and H., Hussain and T. H., Law and Ahmad Farhan, Md. Shokeri (2015) Locating Problematic Road Sections: Comparisons between Crash Data and Composite Index Method. Applied Mechanics and Materials, 802. pp. 345-350. ISSN 1662-7482. (Published)

Iqbal, A. K. M. Parvez and Zabri, N. H. M. and Sahari, K. S. M. and Iqbal, AKM Asif and Ishak, Aris (2015) Process Involved in Designing of an Intelligent Additional Track Mechanism Tracked Vehicle for Swamp Peat Terrain. Indian Journal of Science and Technology, 8 (17). pp. 1-6. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Iqbal, AKM Asif and Arai, Yoshio (2015) Study On Low-Cycle Fatigue Behavior Of Cast Hybrid Metal Matrix Composites. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2504-2514. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Iqbal, AKM Asif and Chen, Songchun and Arai, Yoshio and Araki, Wakako (2015) Study on Stress Evolution in SiC Particles During Crack Propagation in Cast Hybrid Metal Matrix. Engineering Failure Analysis, 52. pp. 109-115. ISSN 1350-6307. (Published)

Irene, Wei Kiong Ting and Noor Azlinna, Azizan (2015) Managerial Overconfidence and Debt Decision: Evidence from Malaysia. Journal of Advanced & Applied Sciences (JAAS), 3 (4). pp. 125-135. ISSN 2289-6260. (Published)

Irene, Wei Kiong Ting and Noor Azlinna, Azizan and Qian, Long Kweh (2015) Does CEO Ownership Matter in Malaysian Government-controlled Firms' Performance? Journal for International Business and Entrepreneurship Development, 8 (3). pp. 268-280. ISSN 1747-6763. (Published)

Irfan, Ahmed and Fakharuddin, Azhar and Qamar, Wali and Ayib Rosdi, Zainun and Jamil, Ismail and Rajan, Jose (2015) Mesoporous Titania-Vertical Nanorod Films With Interfacial Engineering For High Performance Dye-Sensitized Solar Cells. Nanotechnology, 26 (105401). pp. 1-8. ISSN 0957-4484. (Published)

Irnie, Zakaria and Azmi, W. H. and W. A. N., W. Mohamed and R., Mamat and G., Najafi (2015) Experimental Investigation of Thermal Conductivity and Electrical Conductivity of Al2O3 Nanofluid in Water - Ethylene Glycol Mixture for Proton Exchange Membrane Fuel Cell Application. International Communications in Heat and Mass Transfer, 61. pp. 61-68. ISSN 0735-1933. (Published)

Irnie, Zakaria and W. A. N., W. Mohamed and A. M. I., Mamat and R., Saidur and Azmi, W. H. and R., Mamat and K. I., Sainan (2015) Numerical Study On Heat Transfer Enhancement And Fluid Flow for Low Concentration of Al2O3 Water - Ethylene Glycol Mixture Nanofluid in A Single PEMFC Cooling Plate. Energy Procedia, 79. pp. 259-264. ISSN 1876-6102 . (Published)

Irnie, Zakaria and W. A. N., W. Mohamed and A. M. I., Mamat and R., Saidur and Azmi, W. H. and R., Mamat and S. F. A., Talib (2015) Experimental Investigation of Al2O3 - Water Ethylene Glycol Mixture Nanofluid Thermal Behaviour in a Single Cooling Plate for PEM Fuel Cell Application. Energy Procedia, 79. pp. 252-258. ISSN 1876-6102 . (Published)

Irnie, Zakaria and W. A. N. W., Mohamed and A. M. I., Mamat and R., Saidur and Azmi, W. H. and R., Mamat and K. I., Sainan and H., Ismail (2015) Thermal Analysis On Heat Transfer Enhancement And Fluid Flow for Low Concentration of Al2O3 Water - Ethylene Glycol Mixture Nanofluid in A Single PEMFC Cooling Plate. Energy Procedia, 79. pp. 259-264. ISSN 1876-6102 . (Published)

Irnie, Zakaria and Z., Michael and W. A. N., W. Mohamed and A. M. I., Mamat and Azmi, W. H. and R., Mamat and R., Saidur (2015) A Review of Nanofluid Adoption in Polymer Electrolyte Membrane (PEM) Fuel Cells as an Alternative Coolant. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1351-1366. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ishtiaq, Muhammad and Zuraina, Ali and Salem, Muhammad (2015) The Effects of Student Teams Achievement Division (STAD) on Motivation of Saudi EFL Adult Learners. International Journal of Language Education and Applied Linguistics (IJLEAL), 3. pp. 11-24. ISSN 2289-7208 (print); 2289-9294 (online). (Published)

Iskandar, Hasanuddin and Zahari, Taha and Nukman, Y. and Norhafizan, Ahmad and Raja Ariffin, Raja Ghazilla and Tuan Mohammad Yusoff Shah, Tuan Ya (2015) Investigation of the Head Impact Power of a Sepak Takraw Ball on Sepak Takraw Players. Movement, Health & Exercise (MoHE), 4 (2). pp. 45-56. ISSN 2231-9409. (Published)

Islam, Anamul and Sundaraj, Kenneth and R. Badlishah, Ahmad and Ahamed, Nizam Uddin and Md. Asraf, Ali (2015) Analysis of Crosstalk in the Mechanomyographic Signals Generated by Forearm Muscles During Different Wrist Postures. Muscle & Nerve, 51 (6). pp. 899-906. ISSN 1097-4598. (Published)

Islam, Mir Sujaul and Ismail, Sahid and Muhammad Barzani, Gasim and Sahibin, Abd. Rahim and Mohd Ekhwan, Toriman (2015) Prediction of Soil and Nutrient Losses from the Lake Chini Watershed, Pahang, Malaysia. Journal of Physical Science, 26 (1). pp. 53-70. ISSN 1675-3402 (print); 2180-4230 (online). (Published)

Islam, Mir Sujaul and M. A., Sobahan and Edriyana, Abd Aziz and Fadzil, Mat Yahaya and R. M., Yunus (2015) Adverse Impacts of Poor Wastewater Management Practices on Water Quality in Gebeng Industrial Area, Pahang, Malaysia. International Journal of Environmental, Ecological, Geological and Geophysical Engineering, 9 (5). pp. 286-289. (Published)

Islam, Mir Sujaul and M. G., Rasul and Fadzil, Mat Yahaya and Lubna, Alam and Mazlin, Mokhtar (2015) Effects of Anthropogenic Impact on Water Quality in Bertam Catchment, Cameron Highlands, Malaysia. International Journal of Ecology and Environmental Sciences, 41 (1-2). pp. 75-86. ISSN 2320-5199. (Published)

Islam, Mir Sujaul and Md Abdus, Sobahan and R. M., Yunus and Md Abdul, Karim (2015) Evaluation of Novel Bio-friendly Two-step Process in the Removal of Heavy Metals from the Wastewater. Bangladesh Journal of Botany, 44 (4). pp. 571-579. ISSN 0253-5416 (print); 2079-9926 (online) . (Published)

Islam, Mir Sujaul and Sobahan, Md Abdus and Karim, Md Abdul (2015) Status and Contamination Level of the Wastewater of Gebeng Industrial Estate, Pahang, Malaysia. Bangladesh Journal of Botany, 44 (1). pp. 103-110. ISSN 0253-5416 (print); 2079-9926 (online) . (Published)

Islam, Mir Sujaul and Sobahan, Md Abdus and R. M., Yunus (2015) An Investigation of Water Quality Status in Gebeng Industrial Estate, Pahang, Malaysia. Environment Conservation Journal, 16 (1 & 2). pp. 25-35. ISSN 0972-3099 (Print), 2278-5124 (Online). (Published)

Ismail, Ibrahim and Zuwairie, Ibrahim and Hamzah, Ahmad and Mohd Falfazli, Mat Jusof and Zulkifli, Md. Yusof and Sophan Wahyudi, Nawawi and Marizan, Mubin (2015) An Assembly Sequence Planning Approach with a Rule-based Multi-state Gravitational Search Algorithm. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768 (Print), 1433-3015 (Online). (In Press / Online First) (In Press / Online First)

Ismail, Ibrahim and Zuwairie, Ibrahim and Hamzah, Ahmad and Zulkifli, Md. Yusof (2015) An improved multi-state particle swarm optimization for discrete combinatorial optimization problems. International Journal of Simulation: Systems, Science & Technology (IJSSST), 16 (6). 14.1-14.8. ISSN 1473-8031 (print); 1473-804x (online). (Published)

Ismail, Ibrahim and Zuwairie, Ibrahim and Hamzah, Ahmad and Zulkifli, Md. Yusof (2015) A novel multi-state gravitational search algorithm for discrete optimization problems. International Journal of Simulation: Systems, Science & Technology (IJSSST), 16 (6). 15.1-15.8. ISSN 1473-8031 (print); 1473-804x (online). (Published)

Issaka, Souleyman A. and Nour, A. H. and R. M., Yunus (2015) 20-80% Water-In-Diesel Emulsion Fuel Formulations and Stability Study for Duration of Two. International Journal Of Advanced Research, 3 (7). pp. 1394-1398. ISSN 2320-5407. (Published)

Issaka, Souleyman A. and Nour, A. H. and R. M., Yunus (2015) A Comparative Investigation on Petroleum Demulsification Techniques (Centrifuge and Green Chemicals Versus Conventional Chemicals). International Journal of Current Research, 7 (6). pp. 17292-17296. ISSN 0975-833X. (Published)

Issaka, Souleyman A. and Nour, A. H. and R. M., Yunus (2015) Effect of 20% Water Content on the Properties (Cetane Number, Rheology and Stability) of Emulsion Fuel in Comparison to the Commercial Diesel. International Journal of Current Research, 7 (7). pp. 17798-17805. ISSN 0975-833X. (Published)

Issaka, Souleyman A. and Nour, A. H. and R. M., Yunus (2015) Review on the Fundamental Aspects of Petroleum Oil Emulsions and Techniques of Demulsification. Journal of Petroleum & Environmental Biotechnology, 6 (2). pp. 1-15. ISSN 2157-7463. (Published)

Izan Izwan, Misnon and Baiju, Vidyadharan and R. A., Aziz and Rajan, Jose (2015) High Performance Flower Shape Manganese Oxide For Asymmetric Supercapacitor Device. Journal of Engineering and Technology, 6 (1). pp. 100-110. ISSN 2180-3811. (Published)

Izzeldin, I. Mohd and Amran, Abdul Hadi and Md Rizal, Othman and Oudah, Ali A. (2015) Performance Analysis of Seamless Vertical Handover in 4G Networks. Journal of Theoretical and Applied Information Technology, 79 (2). pp. 215-224. ISSN 1992-8645 (print); 817-3195 (online). (Published)

Izzuddin, Zaman and Abdurasad, M. R. and Manshoor, B. and Khalid, A. and M. S. M., Sani (2015) Study on Dynamic Behaviour of Grass Trimmer Using Finite Element Analysis. Applied Mechanics and Materials, 786. pp. 383-387. ISSN 1662-7482. (Published)

Jaber, Aws Naser and Mohamad Fadli, Zolkipli and D. Ahmed, Firas D. Ahmed and Mazlina, Abdul Majid (2015) Security Everywhere Cloud: An Intensive Review of DoS and DDoS Attacks in Cloud Computing. Journal of Advanced & Applied Sciences (JAAS), 3 (5). pp. 152-158. ISSN 2289-6260. (Published)

Jahir Hussain, Fathima Shahitha and M. M., Yusoff and Farah Hanani, Zulkifli (2015) Improved Cellular Response of Chemically Crosslinked Collagen Incorporated Hydroxyethyl Cellulose/poly(vinyl) Alcohol Nanofibers Scaffold. Journal of Biomaterials Applications, 29 (7). pp. 1014-1027. ISSN 0885-3282 (print); 1530-8022 (online). (Published)

Jasim, S. E. and Mohamad Ashry, Jusoh and Muhammad Hafiz, Mazwir and S. N. S., Mahmud (2015) Finding The Best Feeding Point Location Of Patch Antenna Using HFSS. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17444-17449. ISSN 1819-6608. (Published)

Jayakumar, Saravanan and Liang, Yan Peng and Mohd Hasbi, Ab. Rahim and Gaanty Pragas, Maniam (2015) Studies About The Effect of Different Photosynthetic Light Intensity On Two Isolated Species of Marine Microalgae (Diatom) for High Lipid Production. Advances in Environmental Biology, 9 (27). pp. 332-340. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Jessinta, Sandanasamy and Azhari, H. Nour and Hazrulrizawati, Hamid and Ahmad Ziad, Sulaiman and Saiful Nizam, Tajuddin and Nour, A. H. (2015) Bioassay Guided Isolation and Identification of a Cytotoxic Compound from Azadirachta indica Leaves. Journal of the Chinese Chemical Society, 62 (8). pp. 680-688. ISSN 0009-4536 (print); 2192-6549 (online). (Published)

Jia, Xing Yeoh and Chuii, Khim Chong and Mohd Saberi, Mohamad and Yee, Wen Choon and Lian, En Chai and Safaai, Deris and Zuwairie, Ibrahim (2015) Parameter Estimation Using Improved Differential Evolution And Bacterial Foraging Algorithms To Model Tyrosine Production In Mus Musculus(Mouse). Jurnal Teknologi (Sciences and Engineering), 72 (1). pp. 49-56. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Jolius, Gimbun and Noor Intan Shafinas, Muhammad and Law, Woon Phui (2015) Fluid Dynamics and Transport Phenomena Unsteady RANS and Detached Eddy Simulation of the Multiphase Flow in a Co-Current Spray Drying. Chinese Journal of Chemical Engineering, 23 (9). pp. 1421-1428. ISSN 1004-9541. (Published)

Jolius, Gimbun and Noor Intan Shafinas, Muhammad and Law, Woon Phui (2015) Unsteady RANS and Detached Eddy Simulation of the Multiphase Flow in a Co-Current Spray Drying. Chinese Journal of Chemical Engineering, 23 (9). 1421 - 1428. ISSN 1004-9541. (Published)

K., Jayaraman and Hasnah, Haron and Yit, Lu Yee and Shruthi, R. (2015) Reasons for the Failure of Web-Based Application of Information Technology Projects: An Empirical Study in Malaysia. Journal of Problems and Perspectives in Management, 13 (2 (sp)). pp. 277-287. ISSN 1727-7051. (Published)

K., Nithyakalyani and R., Kalpana and S., Sudhakar and N., Vigneswaran (2015) A Novel Pixel Counting Technique to Assess the Volumetric Changes in Human Brain Morphology. Biosciences Biotechnology Research Asia, 12 (1). pp. 677-685. ISSN 0973-1245. (Published)

K. H., Koo and M. R. R., Chand and Hassan, Ibrahim and Azizuddin, Abd Aziz and F., Basrawi (2015) Theoretical Analysis on the Effect of Operation Strategies on the Environmental Performance of Micro Gas Turbine Trigeneration System in Tropical Region. Journal of Mechanical Engineering and Automation, 5 (3A). pp. 19-25. ISSN 2163-2405 (Print); 2163-2413 (Online). (Published)

Kah, Weng Siew and Hua, Chyn Lee and Jolius, Gimbun and Chin, S. Y. and Khan, Maksudur R. and Yun Hin, Taufiq-Yap and Cheng, C. K. (2015) Syngas Production from Glycerol-dry(CO2) Reforming Over La-promoted Ni/Al2O3 Catalyst. Renewable Energy, 74 (Feb.). pp. 441-447. ISSN 0960-1481. (Published)

Kah, Weng Siew and Hua, Chyn Lee and Khan, Maksudur R. and Jolius, Gimbun and Cheng, C. K. (2015) CO2 Reforming of Glycerol over La-Ni/Al2O3 Catalyst: A Longevity Evaluative Study. Journal of Energy Chemistry, 24 (3). pp. 366-373. ISSN 2095-4956. (Published)

Kamal, Yusoh and Norazlina, H. (2015) Graphene Modifications in Polylactic Acid Nanocomposites: A Review. Polymer Bulletin, 72 (4). pp. 931-961. ISSN 0170-0839. (Published)

Kamal Z., Zamli and Alsariera, Yazan A. (2015) A Bat-inspired Strategy for T-Way Interaction Testing. Advanced Science Letters, 21 (7). pp. 2281-2284. ISSN 1936-6612. (Published)

Kamal Z., Zamli and Alsariera, Yazan A. and Nasser, Abdullah B. and Alsewari, Abdulrahman A. (2015) On Adopting Parameter Free Optimization Algorithms for Combinatorial Interaction Testing. Journal of Engineering and Applied Sciences, 10 (19). pp. 8987-8994. ISSN 1819-6608 . (Published)

Kamal Z., Zamli and Alsewari, Abdulrahman A. and Al-Kazemi, Basem (2015) Comparative Benchmarking Of Constraints T-Way Test Generation Strategy Based On Late Acceptance Hill Climbing Algorithm. International Journal of Software Engineering & Computer Sciences (IJSECS), 1. pp. 14-26. ISSN 2289-8522. (Published)

Kamal Z., Zamli and Hasneeza, L. Zakaria (2015) Experimental Model for Teaching Software Testing. Advanced Science Letters, 21 (7). pp. 2493-2496. ISSN 1936-6612. (Published)

Kamal Z., Zamli and Nasser, Abdullah B. and AlSariera, Yazan A. and Al-Sewari, Abdul Rahman Ahmed Mohammed (2015) A Cuckoo Search Based Pairwise Strategy For Combinatorial Testing Problem. Journal of Theoretical and Applied Information Technology, 82 (1). pp. 154-162. ISSN 1992-8645 . (Published)

Kamarul Hawari, Ghazali and M. S., Jadin and Ma, Jie and Rui, Xiao (2015) Novel Automatic Eye Detection and Tracking Algorithm. Optics and Lasers in Engineering, 67. pp. 49-56. ISSN 0143-8166. (Published)

Kamarul Hawari, Ghazali and Norulzahrah, M. Zainudin and Suzaimah, Ramli and M. Lazim, Talib and Nor Asiakin, Hasbullah (2015) A Study on Implementing Physiology-Based Approach and Optical Flow Algorithm to Thermal Screening System for Flu Detection. International Journal of Information and Electronics Engineering, 5 (1). pp. 31-34. ISSN 2010-3719. (Published)

Kamil Zakwan, Mohd Azmi and Zuwairie, Ibrahim (2015) Simultaneous Computation of Model Order and Parameter Estimation for Arx Model Based on Multiswarm Particle Swarm Optimization. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17191-17196. ISSN 1819-6608. (Published)

Kamil Zakwan, Mohd Azmi and Zuwairie, Ibrahim and Pebrianti, Dwi and Sophan Wahyudi, Nawawi and Nor Azlina, Ab. Aziz (2015) Simultaneous Computation of Model Order and Parameter Estimation of a Heating System Based on Gravitational Search Algorithm for Autoregressive with Exogenous Inputs. Journal of Engineering and Applied Sciences, 10 (2). pp. 633-642. ISSN 1816-949X. (Published)

Kartina, Johan (2015) Perception of Students Towards Lecturers Teaching Engineering Courses with Industry Experience: A Case Study in Malaysia Technical University. Procedia Social and Behavioral Sciences, 195. pp. 925-931. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Kashif, Irshad and Khairul, Habib and F., Basrawi and Nagarajan, Thirumalaiswamy and R., Saidur and Bidyut, Baran Saha (2015) Thermal Comfort Study of a Building Equipped with Thermoelectric Air Duct System for Tropical Climate. Applied Thermal Engineering, 91. pp. 1141-1155. ISSN 1359-4311. (Published)

Katanoda, Hiroshi and Mohd Hazwan, Yusof and Morita, Hiromitsu (2015) Energy Separation Mechanism in Unconfined Laminar Compressible Vortex. International Journal of Refrigeration, 59. pp. 115-123. ISSN 0140-7007. (Published)

Keream, Settar S. and Abdalla, Ahmed N. and Mohd Razali, Daud and Ruzlaini, Ghoni and Al Mashhadany, Youssif (2015) Power Factor Control of Matrix Converter Based Induction Motor Drive. Modern Applied Science, 9 (8). pp. 112-120. ISSN 1913-1844 (printed), 1913-1852 (online). (Published)

Khairatun Najwa, Mohd Amin and Pratheep, Kumar Annamalai and Isabel, Catherine Morrow and Darren, J. Martin (2015) Production of Cellulose Nanocrystals Via a Scalable Mechanical Method. RSC Advances, 70 (5). pp. 57133-57140. ISSN 2046-2069. (Published)

Khairunisa, Muthusamy and Norul Wahida, Kamaruzaman and Mohamed A., Ismail and A. M. A., Budiea (2015) Durability Performance of Concrete Containing Laterite Aggregates. KSCE Journal of Civil Engineering. pp. 1-8. ISSN 1226-7988 (Print); 1976-3808 (Online). (In Press / Online First) (In Press / Online First)

Khairunisa, Muthusamy and Norul Wahida, Kamaruzaman and Mohammad Amirulkhairi, Zubir and Mohd Warid, Hussin and Abdul Rahman, Mohd Sam and Ahmed, Budiea (2015) Long Term Investigation on Sulphate Resistance of Concrete Containing Laterite Aggregate. Procedia Engineering, 125. pp. 811-817. ISSN 1877-7058. (Published)

Khairunisa, Muthusamy and Norul Wahida, Kamaruzaman and Saffuan, Wan Ahmad and Fadzil, Mat Yahaya (2015) Study on Durability Performance of Concrete Containing Laterite Aggregates. Concrete Research Letters, 6 (2). pp. 60-68. ISSN 2180-1371. (Published)

Khairunisa, Muthusamy and Nur Azzimah, Zamri (2015) Mechanical Properties of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash as Partial Cement Replacement. KSCE Journal of Civil Engineering, 00. pp. 1-9. ISSN 1226-7988 (Print); 1976-3808 (Online). (Published)

Khairunisa, Muthusamy and Nur Azzimah, Zamri (2015) Short Term Investigation on Sulphate Resistance of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash as Partial Cement Replacement. Research Journal of Applied Sciences, Engineering and Technology, 10 (1). pp. 91-94. ISSN 2040-7459. (Published)

Khairunisa, Muthusamy and Nur Azzimah, Zamri and Iqbal, Mohd Haniffa and Noor Nabilah, Sarbini and Fadzil, Mat Yahaya (2015) Acid Resistance of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash. Applied Mechanics and Materials, 754. pp. 326-330. ISSN 1662-7482. (Published)

Khairunisa, Muthusamy and Nur Azzimah, Zamri and Mohammad Amirulkhairi, Zubir and Kusbiantoro, Andri and Saffuan , Wan Ahmad (2015) Effect of Mixing Ingredient on Compressive Strength of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash. Procedia Engineering, 125. pp. 804-810. ISSN 1877-7058. (Published)

Khalaf, Emad Taha and Norrozila, Sulaiman (2015) Multibiometric systems and template security survey. Journal of Scienctific Research & Development, 2 (14). pp. 38-46. ISSN 1115-7569. (Published)

Khalaf, Emad Taha and Norrozila, Sulaiman (2015) A new biometric template protection based on secure data hiding approach. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 480-487. ISSN 1819-6608. (Published)

Khalaf, Emad Taha and Norrozila, Sulaiman (2015) A new secure storing system for biometric templates based encryption and concealment. Journal of Applied Sciences, 15. pp. 773-782. ISSN 1812-5654. (Published)

Khalaf, Emad Taha and Norrozila, Sulaiman (2015) A survey of multi-biometrics and fusion levels. Indian Journal of Science and Technology, 8 (32). pp. 1-10. ISSN 0974-5645. (Published)

Khalid, Edris and Jasni, Mohamad Zain and Tuty Asmawaty, Abdul Kadir (2015) Reversible Watermarking Based on Sorting Prediction Algorithm. International Journal of Software Engineering & Computer Sciences (IJSECS), 1. pp. 119-130. ISSN 2289-8522. (Published)

Khalil Mesbah, Abdul Jalil and Yuserrie, Zainuddin (2015) Validation of the Theoretical Framework for Adoption of Accounting Information System Using Structural Equation Modelling. International Journal of Industrial Management (IJIM), 1. pp. 1-10. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Khamisah, Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri and G., Najafi (2015) Effect of Titanium Oxide Nanofluid Concentration on Pressure Drop. Journal of Engineering and Applied Sciences, 10 (17). pp. 7815-7820. ISSN 1819-6608. (Published)

Khan, Maksudur R. and Baranitharan, E. and Cheng, C. K. and Yousuf, Abu and Wee, Fei Aaron Teo and Tan, Geok Yuan Annie (2015) Enhanced Power Generation Using Controlled Inoculum From Palm Oil Mill Effluent Fed Microbial Fuel Cell. Fuel, 143. pp. 72-79. ISSN 0016-2361. (Published)

Khan, Maksudur R. and Chuan, Tan Wooi and Yousuf, Abu and Chowdhury, M. N. K. and Cheng, C. K. (2015) Schottky Barrier and Surface Plasmonic Resonance Phenomena Towards the Photocatalytic Reaction: Study of Their Mechanisms to Enhance Photocatalytic Activity. Catalysis Science & Technology, 5 (5). pp. 2522-2531. ISSN 2044-4753. (Published)

Khan, Maksudur R. and Huei, Ruey Ong and Yousuf, Abu and Nitthiyah, Jeyaratnam and Prasad, D. M. Reddy (2015) Effect of Waste Rubber Powder as Filler for Plywood Application. Polish Journal of Chemical Technology, 17 (1). pp. 41-47. ISSN 1899-4741. (Published)

Khan, Maksudur R. and Kar, Min Chan and Huei, Ruey Ong and Cheng, C. K. and Wasikur, Rahman (2015) Nanostructured Pt/MnO2 Catalysts and Their Performance for Oxygen Reduction Reaction in Air Cathode Microbial Fuel Cell. International Journal of Electrical, Computer, Electronics and Communication Engineering, 9 (3). pp. 270-276. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2015) An Experimental Investigation on Surface Finish in Die-Sinking EDM Of Ti-5Al-2.5Sn. The International Journal of Advanced Manufacturing Technology, 77 (9). pp. 1727-1740. ISSN 0268-3768. (Published)

Khan, Musaddiq Majid (2015) The Role of De facto Circumstances in Understanding the Religion = دور الواقع في فهم الدين. Al-Qalam, 20 (2). pp. 416-426. ISSN 2071-8683. (Published)

Khudhur, Ahmed Mahmood and Abdalla, Ahmed N. (2015) A New Neuron Ion Channel Model with Noisy Input Current. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

Kim, Hoong Ng and Cheng, C. K. (2015) A Novel Photomineralization of POME over UV-responsive TiO2 Photocatalyst: Kinetics of POME Degradation and Gaseous Product Formations. RSC Advances, 5 (65). pp. 53100-53110. ISSN 2046-2069. (Published)

Kulkarni, Ajaykumar D. and Lutfor, M. R. and M. M., Yusoff and Huey, Chong Kwong and Ching, Kheng Quah (2015) Crystal Structure of 4-({(1E,2E)-3-[3-(4-fluorophenyl)-1- isopropyl-1H-indol-2-yl]allylidene}amino)-5-methyl-1H-1,2,4-triazole-5(4H)-thione. Acta Crystallographica Section E: Crystallographic Communications, E71 (11). pp. 1411-1413. ISSN 2056-9890. (Published)

Kulkarni, Ajaykumar D. and Lutfor, M. R. and M. M., Yusoff and Huey, Chong Kwong and Ching, Kheng Quah (2015) Crystal Structure of 4-({(1E,2E)-3-[3-(4-fluorophenyl)-1-isopropyl-1H-indol-2-yl]allylidene}amino)1H-1,2,4-triazole-5(4H)-thione. Acta Crystallographica Section E: Crystallographic Communications, E71 (12). pp. 1525-1527. ISSN 2056-9890. (Published)

Kulkarni, R. R. and Shaikh, Ummid and Chavan, Priyanka (2015) An Experimental Investigation of Free Space Cooling by Phase Change Material (PCM). International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 19-24. ISSN 2289-697X. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. and Mohd Fadhil, Md Din (2015) Exoelectrogens in Microbial Fuel Cells toward Bioelectricity Generation: A Review. International Journal of Energy Research, 39 (8). pp. 1048-1067. ISSN 0363-907X (print); 1099-114X (online). (Published)

Kuppusamy, Palaniselvam and M. M., Yusoff and Narasimha, Reddy Parine and Solachuddin J.A., Ichwan and Gaanty Pragas, Maniam and Natanamurugaraj, Govindan (2015) Intracellular Biosynthesis of Au and Ag Nanoparticles using Ethanolic Extract of Brassica oleracea L. and Studies on their Physicochemical and Biological Properties. Journal of Environmental Sciences, 29. pp. 151-157. ISSN 1001-0742. (Published)

Kuppusamy, Palaniselvam and Natanamurugaraj, Govindan and Gaanty Pragas, Maniam and M. M., Yusoff and J. A. Ichwan, Solachuddin and Parine, Narasimha Reddy (2015) Commelina Nudiflora L. Edible Weed as a Novel Source for Gold Nanoparticles Synthesis and Studies on Different Physical-Chemical and Biological Properties. Journal of Industrial and Engineering Chemistry, 27. pp. 59-67. ISSN 1226-086X. (Published)

Kuppusamy, Palaniselvam and Paul Raj, R.S. David and Ilavenil, Soundharrajan and Kaleeswaran, Balasubramanian and Govindan, Natanamurugaraj and Maniam, Gaanty Pragas and Ravikumar, Sivanesan (2015) Evaluation of antihypercholesterolemic effect using Memecylon edule Roxb. ethanolic extract in cholesterol-induced Swiss albino mice. Journal of Acute Medicine, 5 (4). pp. 85-91. ISSN 2211-5587. (Published)

Kusbiantoro, Andri and Norbaizurah, Rahman (2015) Investigation on the Degree of Reaction and Strength Performance of Fly Ash Based Geopolymer Binder with Alternnative Chemical Reagents. Materials Science Forum, 803. pp. 115-119. ISSN 0255-5476. (Published)

L. C., Wor and M. M., Rahman (2015) Stress Behavior Of Tailor-Welded Blanks For Dissimilar Metals Using Finite Element Method. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2541-2554. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L. H., Shah and Nur Farhana, Zainal Ariffin and A. R., Razali (2015) Parameter Optimization of AA6061-AA7075 Dissimilar Friction Stir Welding using the Taguchi Method. Applied Mechanics and Materials, 695. pp. 20-23. ISSN 1662-7482. (Published)

Law, Woon Phui and Jolius, Gimbun (2015) A CFD Study Of A Partial Combustion Lance. Journal of Engineering Science and Technology, 10 (S. I.). pp. 68-78. ISSN 1823-4690. (Published)

Law, Woon Phui and Jolius, Gimbun (2015) Evaluation of the Unsteady Turbulence Modelling and Thermal Insulation on the Performance of Partial Combustion Lance. Chemical Engineering Transactions, 45. pp. 817-822. ISSN 2283-9216. (Published)

Law, Woon Phui and Jolius, Gimbun (2015) Influence of Nozzle Design on the Performance of a Partial Combustion Lance: A CFD Study. Chemical Engineering Research and Design, 104. 558 - 570. ISSN 0263-8762. (Published)

Leong, Puiki and Heck, Stenio Cristaldo and Amietszajew, Tazdin and Mohd Rusllim, Mohamed and Conde, Maria Belen and Dashwood, Richard J. and Bhagat, Rohit (2015) Performance and Polarization Studies of the Magnesium–Antimony Liquid Metal Battery With the use of In-Situ Reference Electrode. RSC Advances, 5 (101). pp. 83096-83105. ISSN 2046-2069. (Published)

Liew, Siau-Chuin and Badshah, Gran and Jasni, Mohamad Zain and Mushtaq, Ali (2015) Secured Telemedicine Using Whole Image as Watermark with Tamper Localization and Recovery Capabilities. Journal of Information Processing Systems, 11 (4). pp. 601-615. ISSN 1976-913X (print); 2092-805X (online). (Published)

Lim, Kar Sing and Siti Nor Fariza, Mior Mohd Tahir and Nordin, Yahaya and Norhazilan, Md Noor and Azlan, Abdul Rahman (2015) Underground Corrosion Model of Steel Pipelines Using In Situ Parameters of Soil. Journal of Pressure Vessel Technology, 137 (5). pp. 1-6. ISSN 0094-9930 (print); 1528-8978 (online). (Published)

Lim, Meng Hee and Leong, Mohd Salman and Inayat-Hussain, J. I. and Ngui, Wai Keng (2015) Diagnosis of blade fault based on wavelet scalogram and blade pass vibration signature analysis. Journal of Vibrational Engineering and Technologies, 3 (4). pp. 497-512. ISSN 2321-3558. (Published)

Lim, Sim Yi and Tan, Li Chin and Mohd Saberi, Mohamad and Safaai, Deris and Saad, Subair and Zuwairie, Ibrahim (2015) A Review on Metabolic Pathway Analysis in Biological Production. Mini-Reviews in Organic Chemistry, 13 (6). pp. 506-523. ISSN 1570-193X (print); 1875-6298 (online). (Published)

Ling, En Hong and Ruzairi, Abdul Rahim and Anita, Ahmad and Mohd Amri, Md. Yunus and Khairul, Hamimah Aba and Leow, Pei Ling and Herman, Wahid and Nasarudin, Ahmad and Mohd Fadzli, Abd Shaib and Yasmin, Abdul Wahab and Suzanna, Ridzuan Aw and Mohd Hafiz, Fazalul Rahiman and Zulkarnay, Zakaria (2015) Fundamental Sensor Development in Electrical Resistance Tomography. Jurnal Teknologi (Sciences and Engineering), 73 (6). pp. 117-124. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Lo, Ing Wong and M. H., Sulaiman and Mohd Rusllim, Mohamed (2015) Solving Economic Dispatch Problems with Practical Constraints Utilizing Grey Wolf Optimizer. Applied Mechanics and Materials, 785. pp. 511-515. ISSN 1662-7482. (Published)

Lovely, Afroza Khanam and Fatimah, Mahmud and M. H., Rohaya (2015) Determination of the Harvesting factors of Independent Smallholder Oil Palm Estate. Journal of Advanced & Applied Sciences (JAAS), 3 (4). pp. 136-144. ISSN 2289-6260. (Published)

Lutfor, M. R. and Biswas, Tapan Kumar and Sarkar, Shaheen M. and M. M., Yusoff and Muhammad Nor Fazli, Abd Malek and Tschierske, Carsten (2015) New U-shaped Liquid Crystals Azobenzene Derived from Catechol for Photoswitching Properties. Journal of Molecular Liquids, 202. pp. 125-133. ISSN 0167-7322. (Published)

Lutfor, M. R. and Sarkar, Shaheen M. and M. M., Yusoff and Kumar, Sandeep and Tschierske, Carsten (2015) Synthesis of New U-Shaped Azobenzene Liquid Crystals for Photoswitching Properties. RSC Advances, 5 (106). pp. 87019-87029. ISSN 2046-2069. (Published)

M., Ghafoori and B., Ghobadian and G., Najafi and M., Layeghi and A., Rashidi and R., Mamat (2015) Effect of Nano-Particles on the Performance and Emission of a Diesel Engine using Biodiesel-Diesel Blend. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3097-3109. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ishak and N. F. M., Noordin and A. S. K., Razali and L. H., Shah and F. R. M., Romlay (2015) Effect Of Filler On Weld Metal Structure Of AA6061 Aluminum Alloy By Tungsten Inert Gas Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2438-2446. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and Ahmad Syazwan, Kamil Razali and L. H., Shah (2015) The Effect of Filler ER4043 and ER5356 on Weld Metal Structure of 6061 Aluminium Alloy by Metal Inert Gas (MIG). International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and Ahmad Syazwan, Kamil Razali and L. H., Shah (2015) The Effect of Filler ER5356 on Weld Metal Structure of 6061 Aluminium Alloy by Metal Inert Gas (MIG). International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and L. H., Shah (2015) Feasibility Study on Joining Dissimilar Aluminum Alloys AA6061 and AA7075 by Tungsten Inert Gas (TIG). Jurnal Teknologi (Sciences and Engineering), 75 (7). pp. 79-84. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and L. H., Shah (2015) Parametric Studies on Tensile Strength in Joining AA6061-T6 and AA7075-T6 by Gas Metal Arc Welding Process. IOP Conference Series: Materials Science and Engineering, 100 (012042). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Kaamal and M. M., Rahman (2015) Dual-Criteria Method For Determining Critical Plane Orientation For Multiaxial Fatigue Prediction Using A Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2571-2581. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman (2015) Fatigue Life Estimation Based On Continuum Mechanics Theory With Application Of Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2586-2598. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman (2015) An Integrated Approach For Fatigue Life Estimation Based On Continuum Mechanics Theory And Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2756-2770. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Yogeswaran and K., Kadirgama and M. M., Rahman and D., Ramasamy (2015) Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2272-2281. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. A., Alaa and K., Yusoh and S. F., Hasany (2015) Pure Polyurethane and Castor Oil Based Polyurethane: Synthesis and Characterization. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1507-1515. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. A., Hassan and Amir Radzi, Ab. Ghani and Zahari, Taha and M. A., Hamdi (2015) Mechanics of Energy Absorption by Progressive Plastic Deformation of a Square Column with an Ellipsoidal Bulge Base. Applied Mathematics & Information Sciences, 9. pp. 51-58. ISSN 1935-0090. (Published)

M. A., Mohd Ali and R. M., Yunus and Cheng, C. K. and Jolius, Gimbun (2015) Successive Optimisation of Waste Cooking Oil Transesterification in a Continuous Microwave Assisted Reactor. RSC Advances, 5 (94). pp. 76743-76751. ISSN 2046-2069. (Published)

M. F. F., Ab Rashid (2015) An Improved Mathematical Model to Predict Surface Roughness Using Hybrid Method. International Journal of Materials, Mechanics and Manufacturing, 3 (1). pp. 36-39. ISSN 1793-8198. (Published)

M. F. F., Ab Rashid and N. M. Z., Nik Mohamed and A. N., Mohd Rose and S. A., Che Ghani and W. S., Wan Harun (2015) Implementation of Ant Colony Optimization Algorithm to Minimize Cost of Turning Process. Applied Mechanics and Materials, 695. pp. 558-561. ISSN 1662-7482. (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N., Mohd Rose (2015) Simulation Study of a Vehicle Production Line for Productivity Improvement. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1283-1292. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N. M., Rose (2015) Optimization of Traveling Salesman Problem with Precedence Constraint using Particle Swarm Optimization. Journal of Scienctific Research & Development , 2 (13). pp. 212-216. ISSN 1115-7569. (Published)

M. H., Sulaiman and Zuriani, Mustaffa and Mohd Rusllim, Mohamed and Omar, Aliman (2015) Using the Gray Wolf Optimizer for Solving Optimal Reactive Power Dispatch Problem. Applied Soft Computing, 32. pp. 286-292. ISSN 1568-4946 (print); 1872-9681 (online). (Published)

M. H. M., Yasin and R., Mamat and A., Aziz and Ahmad Fitri, Yusop and M. H., Ali (2015) Investigation on Combustion Parameters of Palm Biodiesel Operating with a Diesel Engine. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1714-1726. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. Kh., Abdolbaqi and Azmi, W. H. and R., Mamat (2015) Computational Fluid Dynamics Study of Heat Transfer Enhancement in a Circular Tube using Nanofluid. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-6. ISSN 2289-697X. (Published)

M. Kh., Abdolbaqi and C. S. N., Azwadi and R., Mamat and Azmi, W. H. and G., Najafi (2015) Nanofluids Heat Transfer Enhancement Through Straight Channel Under Turbulent Flow. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2294-2305. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and R., Mamat and Azmi, W. H. (2015) Experimental and Numerical Study of Thermo-Hydraulic Performance of Circumferentially Ribbed Tube with Al2O3 Nanofluid. International Communications in Heat and Mass Transfer, 69. pp. 34-40. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and R., Mamat and Azmi, W. H. (2015) Experimental and numerical study of thermo-hydraulic performance of circumferentially ribbed tube with Al2O3 nanofluid. International Communications in Heat and Mass Transfer, 69. pp. 34-40. ISSN 0735-1933. (Published)

M. M., Hasan and M. M., Rahman and K., Kadirgama (2015) A Review on Homogeneous Charge Compression Ignition Engine Performance using Biodiesel–Diesel Blend as a Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2199-2211. ISSN 1985-9325(Print); 2180-1606(Online). (Published)

M. M., Rahman and D., Ramasamy and K., Kadirgama and M. R., Shukri (2015) Artificial Neural Network Optimization Modeling On Engine Performance Of Diesel Engine Using Biodiesel Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2332-2347. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor (2015) Material Removal Rate and Surface Roughness on Grinding of Ductile Cast Iron Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2471-2483. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. N. M., Kahar and Kendall, Graham (2015) A great deluge algorithm for a real-world examination timetabling problem. Journal Of The Operational Research Society, 66 (1). pp. 116-133. ISSN 0160-5682. (Published)

M. Nafis, O. Z. and Case, Keith and Watts, Darren (2015) End Mill Tools Integration in CNC Machining for Rapid Manufacturing Processes: Simulation Studies. Production & Manufacturing Research, 3 (1). pp. 274-288. ISSN 2169-3277. (Published)

M. Nomani, Kabir and Alginahi, Yasser M. and Islam, Kamrul (2015) Simulation of Oxidation Catalyst Converter for After-Treatment in Diesel Engines. International Journal of Automotive Technology, 16 (2). pp. 193-199. ISSN 1229-9138 (print); 1976-3832 (online). (Published)

M. R., Islam and Beg, M. D. H. and Saidatul Shima, Jamari (2015) Characterization of Multiwalled Carbon Nanotube Filled, Palm-Oil-Based Polyalkyds: Effects of Loading and In Situ Reaction. Journal of Applied Polymer Science, 133 (5). p. 42934. ISSN 1097-4628. (Published)

M. R., Islam and Beg, M. D. H. and Saidatul Shima, Jamari (2015) The Effects of Five Different Types of Acid Anhydrides and Incorporation of Montmorillonite Nanoclays on Thermosetting Resins. Polymer Bulletin, 72 (11). pp. 3007-3030. ISSN 0170-0839(Print); 1436-2449(Online). (Published)

M. R., Islam and Beg, M. D. H. and Saidatul Shima, Jamari (2015) The Effects of Increasing Unsaturation in Palm Oil and Incorporation of Carbon Nanotubes on Resinous Properties. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 9 (3). pp. 475-480. (Published)

M. R., Islam and Gupta, Arun and M., Rivai and Beg, M. D. H. (2015) Characterization of Microwave-Treated Oil Palm Empty Fruit Bunch/Glass Fibre/Polypropylene Composites. Journal of Thermoplastic Composite Materials. ISSN 1530-7980 (print); 0892-7057 (online). (Published)

M. R. M., Akramin and M. S., Shaari and A. K., Ariffin and Masanori, Kikuchi and S., Abdullah (2015) Surface Crack Analysis Under Cyclic Loads Using Probabilistic S-Version Finite Element Model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (6). pp. 1851-1865. ISSN 1806-3691. (Published)

M. Rafiqul, Islam and Mimi Sakinah, A. M. and Zularisam, A. W. (2015) Enzymatic Production of Bioxylitol from Sawdust Hydrolysate: Screening of Process Parameters. Applied Biochemistry and Biotechnology, 176 (4). pp. 1071-1083. ISSN 1559-0291. (Published)

M. Rafiqul, Islam and Mimi Sakinah, A. M. and Zularisam, A. W. (2015) Evaluation of Sawdust Hemicellulosic Hydrolysate for Bioproduction of Xylitol by Enzyme Xylose Reductase. Food and Bioproducts Processing, 94. pp. 82-89. ISSN 0960-3085. (Published)

M. Rahim, Uddin and Khan, Maksudur R. and Md. Wasikur, Rahman and Cheng, C. K. and Yousuf, Abu (2015) Photocatalytic Conversion of CO2 into Methanol: Significant Enhancement of the Methanol Yield over Bi2S3/CdS Photocatalyst. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-5. ISSN 2289-697X. (Published)

M. S., Jadin and Salah, Wael A. and Dahaman, Ishak and Zneid, Basem Abu and Abu_Al_Aish, Amir and Sneineh, Anees Abu (2015) Implementation of PWM Control Strategy for Torque Ripples Reduction in Brushless DC Motors. Electrical Engineering. ISSN 0948-7921. (Published)

M. S., Jadin and Soib, Taib and Kamarul Hawari, Ghazali (2015) Finding Region of Interest in the Infrared Image of Electrical Installation. Infrared Physics & Technology, 71. pp. 329-338. ISSN 1350-4495. (Published)

M. S., Norhidayah and A., Norhidayah (2015) Physiological and Psychological Effects on Heat Acclimatization in Extreme Hot Environment. International Journal of Advances in Science Engineering and Technology, 3 (1). pp. 46-52. ISSN 2321-9009. (Published)

M. S. M., Sani and Izzuddin, Zaman and M. M., Rahman (2015) Analysis of Split Air Conditioner Noise using Sound Intensity Mapping. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 9 (1). pp. 28-33. ISSN 2289-7879. (Published)

M. S. M., Sani and M. M., Rahman and M. Z., Baharom and I., Zaman (2015) Sound Intensity Mapping of an Engine Dynamometer. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2820-2829. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. S. M., Sani and Muhamad Norhisham, Abdul Rani and Mohd Azmi, Yunus and Ahmad Azlan, Mat Isa and Liyana, Roslan (2015) Force Appropriation Method for Two Degrees of Freedom Nonlinear System. Jurnal Teknologi (Sciences and Engineering), 76 (8). pp. 5-9. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

M. T. S., Syaima and K. H., Ong and Ishenny, Mohd Noor and M. I. M., Zamratul and S. A., Brahim and M. M., Hafizul (2015) The Synthesis of Bio-Lubricant Based Oil by Hydrolysis and Non-Catalytic of Palm Oil Mill Effluent (Pome) Using Lipase. Renewable and Sustainable Energy Reviews, 44. pp. 669-675. ISSN 1364-0321. (Published)

M. Y., Taib and Shahrani, Anuar and Hassan, Ibrahim (2015) A Review of Ground Heat Exchangers for Cooling Application in the Malaysian Climate. Journal of Mechanical Engineering and Sciences (JMES), 8. pp. 1426-1439. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. Z., Ibrahim and Mulvaney, D. J. (2015) Geometrical-Based Lip-Reading using Template Probabilistic Multi-Dimension Dynamic Time Warping. Journal of Visual Communication and Image Representation , 30. 219 - 233. ISSN 1047-3203. (Published)

M. Z., Ibrahim and Mulvaney, D. J. and M. F., Abas (2015) Feature-Fusion based Audio-Visual Speech Recognition using Lip Geometry Features in Noisy Environment. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17521-17527. ISSN 1819-6608. (Published)

M.K.A., Mohamed and Nor Aida Zuraimi, Md Noar and Mohd Zuki, Salleh and A., Ishak (2015) Stagnation Point Flow Past a Stretching Sheet in a Nanofluid with Slip Condition. AIP Conference Proceedings, 1643. pp. 635-641. (Published)

Mahgoub, B. K. M. and Sulaiman, S. A. and Karim, Z. A. A. and Hagos, F. Y. (2015) Experimental Study on the Effect of Varying Syngas Composition on the Emissions of Dual Fuel CI Engine Operating at Various Engine Speeds. IOP Conference Series: Materials Science and Engineering, 100 (012006). pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Mahmoodian, Reza and Hamdi, M. and Hassan, M. A. and Akbari, Abolghasem (2015) Mechanical and Chemical Characterization of a TiC/C System Synthesized Using a Focus Plasma Arc. PLoS ONE, 10 (6). pp. 1-10. ISSN 1932-6203. (Published)

Mahmoudi Khatir, Nadia and Abdul-Malek, Zulkurnain and Zak, Ali Khorsand and Akbari, Abolghasem and Sabbagh, Farzaneh (2015) Sol–gel Grown Fe-doped ZnO Nanoparticles: Antibacterial and Structural Behaviors. Journal of Sol-Gel Science and Technology. pp. 1-8. ISSN 0928-0707. (Published)

Makky, Essam A. and Ali, Muna Jalal and M. M., Yusoff (2015) Impact of Antibiotic and Heavy Metals Sensitivity on Oral Isolate: A case study. Journal of Chemical and Pharmaceutical Research, 7 (7). pp. 1102-1108. ISSN 0975-7384 . (Published)

Makky, Essam A. and M. M., Yusoff (2015) Bioeconomy: Pectinases Purification and Application of Fermented Waste from Thermomyces Lanuginosus. Journal of Medical and Bioengineering, 4 (1). pp. 76-80. ISSN 2301-3796. (Published)

Makky, Essam A. and Manaf, Almatar (2015) Chemotherapeutic Agents: Taxol and Vincristine Isolated from Endophytic Fungi. International Journal of Current Pharmaceutical, 6 (1). pp. 80-88. ISSN 0976 - 822X. (Published)

Mansurov, Fatkhiddin and Faudzinaim, Badaruddin (2015) Khwaja Yusuf Hamadani: Distinguished Mutasawwif Among Sunni = Khwaja Yusuf Hamadani: Mutasawif Tersohor dalam Kalangan Ahli Sunnah. Jurnal Hadhari: An International Journal, 7 (1). pp. 19-31. ISSN 1985-6830. (Published)

Mardhiana, Ismail and Ghazi Faisal, Najmuldeen and Wan Mohd Hafizuddin, Wan Yussof (2015) Exploring the Transesterification of Castor Oil to Produce Second Generation Biodiesel using a Novel Catalyst. International Journal of Engineering Research & Technology (IJERT), 4 (1). pp. 289-293. ISSN 2278-0181. (Published)

Marini, C. D. and Fatchurrohman, Nanang (2015) A Review On The Fabrication Techniques Of Aluminium Matrix Nanocomposites. Jurnal Teknologi (Sciences and Engineering), 74 (10). pp. 103-109. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Maryam, Zahaba and Rafiqa Azira, M. R. and Noor Faizul, Hadry and N. Norhidayah, A. and Mohd Shukri, M. A. (2015) Indoor Microbial Contamination Through Water Mist Aerosol at Public Restaurants. Jurnal Teknologi (Sciences and Engineering), 77 (24). pp. 45-50. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mathivanan, D. B. and Siregar, J. P. and Bachtiar, Dandi and M. R. M., Rejab and Tezara, C. (2015) Effect of Fibre Loading on the Flexural Properties of Natural Fibre Reinforced Polymer Composites. Applied Mechanics and Materials, 695. pp. 1-4. ISSN 1662-7482. (Published)

Maziyah, Mat Noh and M. R., Arshad and Rosmiwati, Mohd Mokhtar (2015) The Evaluation Of Controller Tracking Performance Based On Taylor’s Series Expansion Model. Jurnal Teknologi (Sciences and Engineering), 74 (9). pp. 175-181. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mazlina, Abdul Majid and Butt, Saad Masood and Suziyanti, Marjudi and Butt, Shahid Masood and Azura, Onn and Butt, Moaz Masood (2015) CASI Method for Improving the Usability of IDS. Science International (Lahore), 27 (1). pp. 275-286. ISSN 1013-5316. (Published)

Mazlina, Abdul Majid and Naser, Aws and Mohamad Fadli, Zolkipli and Khan, Nusrat Ullah (2015) Security Scheme for Protecting Cloud Computing Services Against Bursty DDoS Attacks. International Journal on Advances in Information Sciences and Service Sciences, 7 (1). pp. 39-45. ISSN 2233-9345. (Published)

Mazma Syahidatul Ayuni, Mazlan and Norhayati, Rosli and Nina Suhaity, Azmi and Arifah, Bahar (2015) Modelling the cervical cancer growth process by stochastic delay differential equations. Sains Malaysiana, 44 (8). pp. 1153-1157. ISSN 0126-6039. (Published)

Mazrul Nizam, Abu Seman and L. M., Kei and M. A., Yusoff (2015) Synthesis and Performance of Polyamide Forward Osmosis Membrane for Natural Organic Matter (NOM) Removal. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 9 (2). pp. 368-371. ISSN 2010-3778. (Published)

Md Abdus, Sobahan and Islam, Mir Sujaul (2015) Integrated Assessment of Heavy Metal Contamination in Sediments from Gebeng Industrial Estate, Pahang, Malaysia. Research Journal of Recent Sciences, 4 (11). pp. 26-35. ISSN 2277-2502. (Published)

Md. Ashlyzan, Razik and Razman, Mat Tahar and Wan Hasrulnizzam, Wan Mahmood and Norlinda, Mohd Rozar (2015) Integrated Quality Function Deployment (QFD) Model for Dry Bulk Terminal Improvements (DBTI) in Malaysian Ports. Journal of Economics, Business and Management, 3 (4). pp. 413-416. ISSN 2301-3567. (Published)

Mebrahitom, A. and O., Mamat and F., Ahmad and A. K., Prasada Rao (2015) Thermal Shock and Fatigue Behavior of Pressureless Sintered Al2O3–SiO2–ZrO2 Composites. Journal of Advanced Ceramics, 4 (3). ISSN 2226-4108. (Published)

Mei, Gan Siew and A. R., Yuvaraj and Lutfor, M. R. and M. M., Yusoff and Hegde, Gurumurthy (2015) Synthesis, Liquid Crystal Characterization and Photo-Switching Studies on Fluorine Substituted Azobenzene based Esters. RSC Advances, 5 (9). pp. 6279-6285. ISSN 2046-2069. (Published)

Mior Ahmad Khushairi, Mohd Zahari and Nur Falia Syazana Manja, Farid and Hidayah, Ariffin and Mohd Rahimi, Zakaria Mamat and Mohd Ali, Hassan (2015) Non-Solvent Pretreatment of Poly(3-Hydroxybutyrate) for Improved Bio-Based Crotonic Acid Production. RSC Advances, 5 (42). pp. 33546-33553. ISSN 2046-2069. (Published)

Mofijur, M. and Masjuki, H. H. and Kalam, Md. Abul and Rahman, S. M. Ashrafur and Mahmudul, H. M. (2015) Energy Scenario and Biofuel Policies and Targets in ASEAN Countries. Renewable and Sustainable Energy Reviews, 46. pp. 51-61. ISSN 1364-0321. (Published)

Mohamad, Mazuina and Hadi, Manap (2015) THE OPTIMAL ABSORPTION OF BILIRUBIN USING AN OPTICAL FIBRE SENSOR. ARPN Journal of Engineering and Applied Sciences. ISSN 1819-6608. (Published)

Mohamad Rizza, Othman and Umarul Imran, Amran and Gade Padu, Rangaiah (2015) Process Optimization of DWC for Fatty Acid Fractionation using Taguchi Methods of Experimental Design. Chemical Engineering Transactions, 45. pp. 925-930. ISSN 2283-9216. (Published)

Mohamad Rusdi, Abdul Rahman and L. H., Shah and M., Ishak (2015) Parameter Optimization of Preheating Method on Aluminium Stainless Steel Metal Inert Gas (MIG) Dissimilar Welding. Applied Mechanics and Materials, 773-74. pp. 253-256. ISSN 1662-7482. (Published)

Mohamad Z., Nordin and Mohamad R., Othman and Mohd K. A., Hamid (2015) Application of Sustainable Integrated Process Design and Control for Four Distillation Column Systems. Chemical Engineering Transactions, 45. pp. 211-216. ISSN 2283-9216. (Published)

Mohamad Zairi, Baharom and Priyandoko, Gigih and F. R. M., Romlay and M. S. M., Sani and M. S., Salleh and M. H. M., Yusof (2015) Voltage Induced Effect for Vibration Suppression Using Eddy Current on Power Steering System. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7482-7487. ISSN 1819-6608. (Published)

Mohamed Mostafa, A. Azim and M. Nomani, Kabir (2015) Availability Analysis Of Shared Backup Path Protection Under Multiple-Link Failure Scenario In WDM Networks. Annals of Telecommunications, 70 (5). pp. 249-262. ISSN 0003-4347 (print); 1958-9395 (online). (Published)

Mohammad Akmal, Akashah and R., Mamat and Abdul Adam, Abdullah and A., Aziz and H. M., Yassin (2015) Effect Of Ambient Temperature On Diesel-Engine Combustion Characteristics Operating With Alcohol Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2373-2382. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohammad Amirulkhairi, Zubir and Muhammad Nazrin Akmal, Ahmad Zawawi and Mohd Fairuz, Azmi (2015) Synthetic Lightweight Coarse Aggregate using Offshore Sand. Journal of Advanced Research in Applied Mechanics, 12 (1). pp. 16-22. ISSN 2289-7895. (Published)

Mohammed, Kamil and M. M., Rahman (2015) Effect of Injection Hole Diameter on Operational Conditions of Common-Rail Fuel-Injection System for Portinjection Hydrogen-Fueled Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2383-2395. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohammed, Kamil and M. M., Rahman (2015) Performance Prediction of Spark-Ignition Engine Running on Gasoline-hydrogen and Methane-hydrogen Blends. Applied Energy, 158. pp. 556-567. ISSN 0306-2619. (Published)

Mohammed, Maysoon A. and Mazlina, Abdul Majid and Balsam, A. Mustafa and Ghani, Rana Fareed (2015) CPU Burst Processes Prioritization Using Priority Dynamic Quantum Time Algorithm: A Comparison with Varying Time Quantum and Round Robin Algorithms. International Journal of Electrical & Computer Sciences IJECS-IJENS, 15 (06). pp. 23-34. ISSN 2227-2739(Print); 2077-1231(Online). (Published)

Mohammed, Mohammed Adam Taheir and Wan Maseri, Wan Mohd and Ruzaini, Abdullah Arshah (2015) Pre Soft Parameter Reduction From Soft Set. Asian Academic Research Journal Of Multidisciplinary, 2 (6). pp. 95-105. ISSN 2319-2801. (Published)

Mohammed, Nasir and Othman, Sulaiman and Rokiah, Hashim and Hossain, Kaizar and Gupta, Arun and Mohd, Asim (2015) Rubberwood Fiber Treatment by Laccase Enzyme and Its Application in Medium Density Fiberboard. Journal of Pure and Applied Microbiology, 9 (3). pp. 2095-2100. ISSN 0973-7510. (Published)

Mohd Affandi, Mohd Ali and Jolius, Gimbun and Cheng, C. K. and R. M., Yunus (2015) Optimization of Waste Cooking Oil Transesterification in a Continuous Microwave Assisted Reactor. Chemical Engineering Transactions, 45. pp. 1279-1284. ISSN 2283-9216. (Published)

Mohd Anwar, Zawawi and O’Keeffe, Sinead and Lewis, Elfed (2015) An Extrinsic Optical Fiber Bending Sensor: A Theoretical Investigation and Validation. IEEE Sensors Journal, 15 (9). pp. 5333-5339. ISSN 1530-437X. (Published)

Mohd Anwar, Zawawi and O’Keeffe, Sinead and Lewis, Elfed (2015) Optical Fibre Bending Sensor With Automatic Intensity Compensation. Journal of Lightwave Technology, 33 (12). pp. 2492-2498. ISSN 0733-8724. (Published)

Mohd Arfian, Ismail and Safaai, Deris and Mohd Saberi, Mohamad and Afnizanfaizal, Abdullah (2015) A Newton Cooperative Genetic Algorithm Method for In Silico Optimization of Metabolic Pathway Production. PLoS ONE, 10 (5). pp. 1-19. ISSN 1932-6203. (Published)

Mohd Arfian, Ismail and Safaai, Deris and Mohd Saberi, Mohamad and Mohd Adham, Isa and Afnizanfaizal, Abdullah and Muhammad Akmal, Remli and Mohi-Aldeen, Shayma Mustafa (2015) A Hybrid of Optimization Method for Multi-Objective Constraint Optimization of Biochemical System Production. Journal of Theoretical and Applied Information Technology, 81 (3). pp. 502-513. ISSN 1992-8645 (print); 817-3195 (online). (Published)

Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff and M. F. F., Ab Rashid (2015) Parametric Optimization Of Magneto-Rheological Fluid Damper Using Particle Swarm Optimization. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2591-2599. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Bakar, Mohd Mishani and Ong, Zhi Chao and Chong, Wen Tong and Khoo, Shin Yee and Abdul Ghaffar, Abdul Rahman (2015) A Simplified Technique to Distinguish Unbalance and Misalignment Using Frequency Domain Operating Deflection Shape. Jurnal Teknologi (Sciences and Engineering), 76 (8). pp. 1-4. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Farid, Zainudin and R. A., Bakar and Gan, Leong Ming and Tanti Zanariah, Shamshir Ali and Billy, Anak Sup (2015) Design and Stress Simulation of Crankshaft for Slider Crank-Drive Stirling Engine. Applied Mechanics and Materials, 699. pp. 678-683. ISSN 1662-7482. (Published)

Mohd Faris, Mustafa and Noor Asma Fazli, Abdul Samad and Kamarul, Asri Ibrahim and Norzana, Ibrahim and Mohd Kamaruddin, Abd Hamid (2015) Energy efficient distillation columns design for retrofit NGLs fractionation process. Advanced Materials Research, 1113. pp. 667-673. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Fawzi, Zamri and A. R., Yusoff (2015) Heuristic Optimization of Cooling Channel Design in the Hot Stamping Die for Hot Stamping Process. Advances in Materials and Processing Technologies, 1 (1-2). pp. 27-35. ISSN 2374-068X (Print), 2374-0698 (Online). (Published)

Mohd Hafizil, Mat Yasin and Perowansa, Paruka and R., Mamat and Ahmad Fitri, Yusop and G., Najafi and Azri, Alias (2015) Effect of Low Proportion Palm Biodiesel Blend on Performance, Combustion and Emission Characteristics of a Diesel Engine. Energy Procedia, 75. pp. 92-98. ISSN 1876-6102 . (Published)

Mohd Hafizil, Mat Yasin and Perowansa, Paruka and R., Mamat and Mohd Hafiz, Ali (2015) Fundamental Study of Dual Fuel on Exhaust Gas Recirculation (EGR) Operating with a Diesel Engine. Applied Mechanics and Materials, 773. pp. 415-419. ISSN 1662-7482. (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Amir, Aziz and G., Najafi (2015) Comparative Study on Biodiesel-Methanol-Diesel Low Proportion Blends Operating with a Diesel Engine. Energy Procedia, 75. pp. 10-16. ISSN 1876-6102 . (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Perowansa, Paruka and Talal, Yusaf and G., Najafi (2015) Effects of Exhaust Gas Recirculation (EGR) on a Diesel Engine Fuelled with Palm-Biodiesel. Energy Procedia, 75. pp. 30-36. ISSN 1876-6102 . (Published)

Mohd Haizal, Mohd Husin and Dewayanto, Nugroho and Mohd Ridzuan, Nordin and Li, Jinlin (2015) The Characteristics of Copper Containing SBA-15 Prepared by Impregnation and pH Adjustment Methods and Their Activities For N2O Decomposition. Advances in Environmental Biology, 9 (6). pp. 6-14. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Mohd Haizal, Mohd Husin and Mohd Ridzuan, Nordin and Imran Syakir, Mohamad and Jin Lin, Li (2015) Synthesis and Characteristics of Mesoporous SBA-15 Influence by HMTA as an Internal pH Modifier. Applied Mechanics and Materials, 761. pp. 473-478. ISSN 1662-7482. (Published)

Mohd Hasnun Ariff, Hassan and Zahari, Taha (2015) Finite Element Analysis of Soccer Heading. Procedia Engineering, 112. pp. 46-51. ISSN 1877-7058. (Published)

Mohd Jamil Mohamed, Mokhtarudin and Payne, S. J. (2015) Mathematical Model of the Effect of Ischemia–reperfusion on Brain Capillary Collapse and Tissue Swelling. Mathematical Biosciences, 263. pp. 111-120. ISSN 0025-5564. (Published)

Mohd Mawardi, Saari and Tsukamoto, Yuya and Kusaka, Toki and Ishihara, Yuichi and Sakai, Kenji and Kiwa, Toshihiko and Tsukada, Keiji (2015) Effect of diamagnetic contribution of water on harmonics distribution in a dilute solution of iron oxide nanoparticles measured using high-Tc SQUID magnetometer. Journal of Magnetism and Magnetic Materials, 394. pp. 260-265. ISSN 0304-8853. (Published)

Mohd Razali, Hanipah and R., Mikalsen and A. P., Roskilly (2015) Recent Commercial Free-Piston Engine Developments for Automotive Applications. Applied Thermal Engineering, 75. pp. 493-503. ISSN 1359-4311. (Published)

Mohd Razali, Daud and Nur Afzan, Murtadza and Saifudin, Razali (2015) 3D Panorama Scene Reconstruction Using Kinect Camera. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9802-9806. ISSN 1819-6608. (Published)

Mohd Ridzuan, Darun and Jamal, Roudaki and Radford, Jack (2015) Forces Shaping Working Capital Management Practices: A Preliminary Study. International Business Management, 9 (3). pp. 310-318. ISSN 1993-5250. (Published)

Mohd Ridzuan, Darun and Roudaki, Jamal and Radford, Jack (2015) The Evolution of Working Capital Management Research. International Business Management, 9 (5). pp. 987-997. ISSN 1993-5250. (Published)

Mohd Rusllim, Mohamed and P. K., Leung and M. H., Sulaiman (2015) Performance Characterization of a Vanadium Redox Flow Battery at Different Operating Parameters under a Standardized Test-Bed System. Applied Energy, 137. pp. 402-412. ISSN 0306-2619. (Published)

Mohd Shahril, Abu Hanifah (2015) Prevalence of Revalence of Musculoskeletal Problems Among Manual Handling Workers In Courier Service Industry. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 81-88. ISSN 2289-697X. (Published)

Mohd Syakirin, Ramli and Shigeru, Yamamoto (2015) A Lyapunov Function Approach to Dynamic Stable Matching in A Multi-agent System. ICGST International Journal on Automatic Control & System Engineering , 15 (1). pp. 1-13. ISSN 1687-4811. (Published)

Mohd Yuhyi, Mohd Tadza and Hazwani Hawa, Mohammad Sobani and Nur Ain Farhana, Ghani (2015) Characteristics of Struvite Precipitate from Palm Oil Mill Effluent. Journal of Science and Technology in the Tropics, 11 (1). pp. 1-8. ISSN 1823-5034. (Published)

Mohd Yusof, Taib and Azim, Arshad and Suziyana, Mat Dahan and F., Basrawi (2015) Experimental Study of a Domestic Refrigerator with POE-AI2O3 Nanolubricant. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2243-2252. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Zaidi, Sidek and Mohd Syahidan, Kamarudin and Mohamad Nafis, Jamaluddin (2015) Simulation and Fabrication of Open-Type Boiler of Fish Cracker Production Line. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

Mohd. Shafie, Bakar and Kamarul Hawari, Ghazali and Hamdan, Daniyal and Nasrudin, Abd. Rahim (2015) Experimental Study Of SBPWM For Z-Source Inverter Five Phase. International Journal of Power Electronics and Drive System (IJPEDS), 6 (1). pp. 45-55. ISSN 2088-8694 (print); 2088-8694 (online). (Published)

Mudaber, Mohammad Hassan and Yuhani, Yusof and Mohd Sham, Mohamad and Wen, Li Lim (2015) Persistency and permanency of two stages splicing languages via Yusof-Goode approach: two initial strings and two rules. Jurnal Teknologi (Sciences and Engineering), 77 (1). pp. 223-228. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mudaber, Mohammad Hassan and Yuhani, Yusof and Mohd Sham, Mohamad and Wen, Li Lim (2015) Persistent and Permanent Point of Views of Two Stages DNA Splicing Languages. Research Journal of Mathematical and Statistical Sciences, 3(1). pp. 15-23. ISSN 2320–6047. (Published)

Muhamad, N. and M. M., Yusoff and Jolius, Gimbun (2015) Thermal Degradation Kinetics of Nicotinic Acid, Pantothenic Acid and Catechin Derived from Averrhoa bilimbi Fruits. RSC Advances, 5 (90). pp. 74132-74137. ISSN 2046-2069. (Published)

Muhammad Adib , Shaharun and A. R., Yusoff (2015) Effects of Irregular Tool Geometry and Machining Process Parameters on the Wavelength Performance of Process Damping in Machining Titanium Alloy at Low Cutting Speed. The International Journal of Advanced Manufacturing Technology. pp. 1-15. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Muhammad Asri, Zainal Abidin and Wan Ismail, Ibrahim and M. S., Jadin (2015) Design of Inductive Power Transfer (IPT) for Low-Power Application. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9807-9812. ISSN 1819-6608. (Published)

Muhammad Azim, Azizi and Ahmad Kamal Ariffin, Mohd Ihsan and Nik Abdullah, Nik Mohamed (2015) The Peridynamic Model of Viscoelastic Creep and Recovery. Multidiscipline Modeling in Materials and Structures, 11 (4). pp. 579-597. ISSN 1573-6105. (Published)

Muhammad Azrin, Ahmad and Nor Haniza, Sarmin and Wan, Heng Fong and Yuhani, Yusof (2015) A Comparison of Second Order and Non-Second Order Limit Language Generated by Yusof-Goode Splicing System. Jurnal Teknologi (Sciences and Engineering), 72 (1). pp. 27-31. ISSN 2180-3722. (Published)

Muhammad Faisal, Siddiqui and Miles, Rzechowicz and Winters, Harvey and Zularisam, A. W. and G. Fane, Anthony (2015) Quorum Sensing Based Membrane Biofouling Control for Water Treatment: A Review. Journal of Water Process Engineering, 7. pp. 112-122. ISSN 2214-7144. (Published)

Muhammad Ikram, Mohd Rashid and Hamdan, Daniyal (2015) Modelling and Simulation of Split Plug-in Hybrid Electric Vehicle using ADVISOR. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9860-9865. ISSN 1819-6608. (Published)

Muhammad Khairul Anuar , Mohamed and Mohd Zuki, Salleh and Anuar, Ishak and Ioan, Pop (2015) Stagnation Point Flow and Heat Transfer Over a Stretching/ Shrinking Sheet in a Viscoelastic Fluid with Convective Boundary Condition and Partial Slip Velocity. The European Physical Journal Plus, 130 (8). ISSN 2190-5444. (Published)

Muhammad Nubli, Abdul Wahab and Aiman, Atta (2015) The Study on the Effect of Zikir Protocols Training towards Performance of Heart Rate Variability (HRV) and Academic Achievement among Secondary Schools Students. International Journal of Computer Applications, 117 (1). pp. 18-22. ISSN 0975–8887. (Published)

Muhammad Nubli, Abdul Wahab and Azham, Abdul Rahman (2015) A Study On The Effects of Breathing Cycle Training Technique Together With Dzikr Recitation Towards Achievement of Students’ HRV. International Journal of Computer Applications, 114 (17). pp. 8-14. ISSN 0975–8887. (Published)

Muhammad Nubli, Abdul Wahab and Azham, Abdul Rahman (2015) A Study of the Effect Of Dzikr on the Psychology of Students with Disciplinary Problems using Heart Rate Variability (HRV). Research Journal of Social Science & Management, 5 (3). pp. 111-116. ISSN 2251-1571. (Published)

Muhammad Nubli, Abdul Wahab and Wan Rusyaini, Wan Mohd and Azham, Abdul Rahman (2015) A Study on Self Regulation Techniques Training Towards Achievement of Students’ HRV. International Journal of Computer Applications, 117 (1). pp. 32-40. ISSN 0975-8887. (Published)

Murugan, Amarchand Chordia and Karim, Md. Rezaul and M. M., Yusoff and Tan, Suat Hian and Mohd Fazli, Farida Asras and Rashid, Shah Samiur (2015) New Insights into Seaweed Polyphenols on Glucose Homeostasis. Pharmaceutical Biology, 53 (8). pp. 1087-1097. ISSN 1388-0209. (Published)

Murugan, Amarchand Chordia and Vallal, Dahineeswari and Karim, Md. Rezaul and Govindan, Natanamurugaraj and M. M., Yusoff and Rahman, Md. Mokhlesur (2015) In vitro antiradical and neuroprotective activity of polyphenolic extract from marine algae Padina australis H. Journal of Chemical and Pharmaceutical Research, 7 (8). pp. 355-362. ISSN 0975-7384 . (Published)

Mushtaq, Al-Duliamy and Hojabri, Mojgan and Hamdan, Daniyal and Ali Mahmood, Humada (2015) Maximum Power Prediction for PV System based on P&O Algorithm. Journal of Advanced & Applied Sciences (JAAS), 3 (4). pp. 113-118. ISSN 2289-6260. (Published)

Muzamir, Hasan and Nuraini, Yusuf and Noor Amirah, Noor Shahrudeen and Anas Mohammed, Husian Kassim (2015) Strength of Soft Clay Reinforced with Group Crushed Polypropylene (PP) Columns. The Electronic Journal of Geotechnical Engineering (EJGE), 20 (B. 22). pp. 12291-12308. ISSN 8606-9849. (Published)

N., Vigneswaran and Fahmi, Samsuri and Kalyani, K. Nithya (2015) Bioimprinting Based Scaffold Development for Tissue Engineering Applications. Biomedical and Pharmacology Journal (BPJ), 8 (1). pp. 337-343. ISSN 0974-6242 (Print); 2456–2610 (Online). (Published)

N., Zainol and Emine, Seydametova and Jailani, Salihon and Convey, Peter (2015) Mangrove Rhizosphere Soils: A Unique Natural Source of Pravastatin-Producing Penicillium Microfungi. International Journal of Extensive Research, 5. pp. 79-87. ISSN 2394-0301. (Published)

N., Zainol and Siti Mazlifah, Ismail (2015) The Study on Biological PH Treatment of Acidic Palm Oil Mill Effluent. Jurnal Teknologi (Sciences and Engineering), 76 (1). pp. 139-146. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid (2015) Forced Convection Heat Transfer Using Water-Ethylene Glycol (60:40) Based Nanofluids in Automotive Cooling System. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2747-2755. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid (2015) Thermal Conductivity Enhancement of Al2O3 Nanofluid in Ethylene Glycol and Water Mixture. Energy Procedia, 79. pp. 397-402. ISSN 1876-6102 . (Published)

N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2015) Mechanical Strength Of Dissimilar AA7075 and AA6061 Aluminum Alloys Using Friction Stir Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2713-2721. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. A. Z., Abdullah and M. S. M., Sani and M. M., Rahman and Izzuddin, Zaman (2015) A Review on Model Updating In Structural Dynamics. IOP Conference Series: Materials Science and Engineering, 100 (1). 012015. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

N. F., Adnan and M. F., Ghazali and Makeen, Mohd Amin and A. M. A., Hamat (2015) Leak Detection in Gas Pipeline using Hilbert-Huang Transform. Applied Mechanics and Materials, 815. pp. 403-407. ISSN 1662-7482. (Published)

N. I. A.A, Nordin and H., Ariffin and M. A., Hasan and N. A., Ibrahim and Yoshihito, Shirai and Y., Andou (2015) Effects of Milling Methods on Tensile Properties of Polypropylene/ Oil Palm Mesocarp Fibre Biocomposite. Pertanika Journal of Science & Technology (JST), 23 (2). pp. 325-337. ISSN 0128-7680. (Published)

N. M. Zuki, N. M. and Mohd Kamal, Mohd Nawawi and Adam Shariff Adli, Aminuddin (2015) Hybrid Knowledge-Based System for Collaborative Green Automotive Manufacturing Management. Applied Mechanics and Materials, 752/53. pp. 1333-1338. ISSN 1662-7482. (Published)

N. N., Razak and A. A., Razak and C. G., Pretty and N. H., Ahamad and F. M., Suhaimi and U., Jamaluddin (2015) Virtual Trial Protocol Analysis of Nursing Workload Intensity within ICU. International Conference for Innovation in Biomedical Engineering and Life Sciences, 56. pp. 294-297. ISSN 1680-0737. (Published)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama (2015) Neural Network Modeling Of Grinding Parameters Of Ductile Cast Iron Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2608-2621. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. S. M., Shalahim and Siti Zawiah, M. D. and Case, Keith (2015) The Relationship Between Anthropometry and Hand Grip Strength Among Elderly Malaysians. International Journal of Industrial Ergonomics, 50. pp. 17-25. ISSN 0169-8141. (Published)

Nadia, Refat (2015) Derivation: An Efficient Way of Enhancing English Vocabulary. International Journal of Language Education and Applied Linguistics (IJLEAL), 2. pp. 17-26. ISSN 2289-7208 (print); 2289-9294 (online). (Published)

Nahar, Ali Kareem and Yusnita, Rahayu (2015) Design of Selectable Modems for MC-CDMA Based on Software Defined Radio. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

Naif, Yasir Hashim (2015) A Review on Transistors in Nano Dimensions. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 8-18. ISSN 2289-697X. (Published)

Naif, Yasir Hashim and Othman, Sidek (2015) Optimization of Nanowire Resistance Load Logic Inverter. Journal of Nanoscience and Nanotechnology, 15 (9). pp. 6840-6842. ISSN 1533-4880 (Print); 1533-4899 (Online). (Published)

Naif, Yasir Hasyim and Alsibai, Mohammad Hayyan and Abdul Manap, Sulastri (2015) Optimization of Nanowires Ratio in Nano-scale SiNWT Based SRAM Cell. MATEC Web of Conferences, 27. pp. 1-5. ISSN 2261-236X. (Published)

Najah, Osman and Hafizoah, Kassim (2015) Exploring Strategic Thinking Skills in Process Oriented Task in ESL Classroom. Procedia - Social and Behavioral Sciences, 171. pp. 937-944. ISSN 1877-0428, ESSN: 1877-0428. (Published)

Najiha, M. S. and M. M., Rahman (2015) Experimental Study on Minimum Quantity Lubrication in End Milling of AA6061-T6 Using Tialn Coated Carbide Tools. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2771-2785. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2015) Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool. Journal of Manufacturing Science and Engineering, 137 (6). pp. 1-7. ISSN 1087-1357 (print); 1528-8935 (online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2015) Flank Wear Characterization in Aluminum Alloy (6061 T6) with Nanofluid MQL Environment using Uncoated Carbide Tool. Journal of Manufacturing Science and Engineering, 137 (6). pp. 1-7. ISSN 1087-1357 (print); 1528-8935 (online). (In Press / Online First) (In Press / Online First)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2015) Machining Performance Of Aluminum Alloy 6061-T6 On Surface Finish Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2699-2712. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama and M. M., Noor and D., Ramasamy (2015) Multi-Objective Optimization of Minimum Quantity Lubrication in end Milling of Aluminum Alloy AA6061T6. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3003-3017. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najihah, Mohamed and Ahmad, Abd Majid and Abd Rahni, Mat Piah (2015) Data Fitting by G1 Rational Cubic Bézier Curves Using Harmony Search. Egyptian Informatics Journal, 16 (2). pp. 175-185. ISSN 1110-8665. (Published)

Najihah, Mohamed and M. M., Rahman and K., Kadirgama (2015) Experimental Investigation and Optimization of Minimum Quantity Lubrication for Machining of AA6061-T6. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2722-2737. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najmuldeen, Ghazi Faisal and Al Ezzi, Ali Abdul Rahman (2015) Application of a Novel Design for Air Lift Reactor In Waste Water Treatment. International Journal of Scientific Research in Science, Engineering and Technology, 1 (1). pp. 1-7. ISSN 2395-1990. (Published)

Najmuldeen, Ghazi Faisal and G. G., Faisal and S. M., Zakaria (2015) In Vitro Antibacterial Activity of Eurycoma Longifolia Jack (Tongkat Ali) Root Extract. The International Medical Journal Malaysia, 14 (1). pp. 77-81. (Published)

Nasly, Mohamed Ali and Hossain, Mohamed Amjed and Islam, Mir Sujaul (2015) Spatial Distribution and Source Apportionment of Heavy Metals in Soils of Gebeng Industrial City, Malaysia. Environmental Earth Sciences, 73 (1). pp. 115-126. ISSN 1866-6299. (Published)

Navale, S. J. and Kulkarni, R. R. and Thipse, S. S. (2015) Simulation Model of Hydrogen Fueled SI Engine. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 1-8. ISSN 2289-697X. (Published)

Naveen, Kumar Elumalai and Chellappan, Vijila and Rajan, Jose and Ashraf, Uddin and Seeram, Ramakrishna (2015) Metal Oxide Semiconducting Interfacial Layers for Photovoltaic and Photocatalytic Applications. Materials for Renewable and Sustainable Energy, 4 (11). pp. 1-25. ISSN 2194-1459 (Print); 2194-1467 (Online). (Published)

Ngien, S. K. and R., Sa'ari and N. A., Rahman and H. N., Abdul Latif and Z. M., Yusof and S. A., Kamaruddin and M., Mustaffar and M. A., Hezmi (2015) Application of Digital Image Processing Technique in Monitoring LNAPL Migration in Double Porosity Soil Column. Jurnal Teknologi (Sciences and Engineering), 72 (3). pp. 23-29. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Nik Aloesnita, Nik Mohd Alwi and Umi Kalsom, Masrom and Nor Shidrah, Mat Daud (2015) Task Complexity and the Complexity of Written Language Production: A Review of Literature. International Journal of Linguistics, 7 (3). pp. 78-93. ISSN 1948-5425. (Published)

Noor, Hindryawati and Gaanty Pragas, Maniam (2015) Novel Utilization of Waste Marine Sponge (Demospongiae) as a Catalyst In Ultrasound-Assisted Transesterification of Waste Cooking Oil. Ultrasonics Sonochemistry, 22. pp. 454-462. ISSN 1350-4177. (Published)

Noor Afeefah, Nordin and Othman, Sulaiman and Rokiah, Hashim and Nurjannah, Salim and Mohammed, Nasir and Masatoshi, Sato and Salim, Hiziroglu (2015) Effect of Adhesive Spreading Rate on the Performance of Laminated Compressed Oil Palm Trunks. BioResources, 10 (4). pp. 6378-6387. ISSN 1930-2126 (print); 1930-2126 (online). (Published)

Noor Ashila, Ramle and Syarifah, Abd Rahim and El-Hadad, Omar and Nornizar, Anuar (2015) Solubility of Carbamazepine-Succinic Co-Crystal in Ethanolic Solvent System. Advanced Materials Research, 1113. pp. 434-439. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Noor Azlinna, Azizan and Irene, Wei Kiong Ting and Qian, Long Kweh (2015) Upper Echelon Theory Revisited: The Relationship between CEO Personal Characteristics and Financial Leverage Decision. Procedia Social and Behavioral Sciences, 195. pp. 686-694. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Noor Azlinna, Azizan and Qian, Long Kweh and Irene, Wei Kiong Ting (2015) Efficiency of Malaysian Politically Connected Insurers: Revisiting the Resource-based View. Journal for International Business and Entrepreneurship Development, 8 (3). (Published)

Noor Azlinna, Azizan and Qian, Long Kweh and Wen-Min, Lu and Irene, Wei Kiong Ting (2015) Strategically Integrating Risk Management into Intellectual Capital Management. International Journal of Learning and Intellectual Capital, 12 (2). p. 193. ISSN 1479-4853 (print); 1479-4861 (online). (Published)

Noor Suzana, Bakar and Mimi Sakinah, A. M. (2015) Resistance in Series Model for Ultrafiltration Xylose Reductase from Product Mixtures. Journal of Applied Science and Agriculture, 10 (5 Sp.). pp. 222-227. ISSN 1816-9112. (Published)

Noor Zaihah, Jamal and Omar, Aliman and M. H., Sulaiman (2015) Inverse definite overcurrent relay discrimination algorithm and its application in industrial power systems. ARPN Journal of Engineering and Applied Sciences, 10 (23). ISSN 1819-6608. (Published)

Noorul Ain, Mohd Akib and Nor Hashila, Mohd Hirmizi and Wei, Leng Tan and Noor Hana Hanif, Abu Bakar and Mohamad, Abu Bakar and Jamil, Ismail and Cheng, Hoon Teoh and Chun, Hwa See (2015) Synthesis of Dispersed and Self-Assembled Metal Particles in Epoxy via Aqueous to Organic Phase Transfer Technique. International Journal of Theoretical and Applied Nanotechnology, 3. pp. 9-19. ISSN 1929-1248. (Published)

Nor Adila, Mhd Omar and Sumaiyah, Abdullah and Noorlidah, Abdullah and Kuppusamy, Umah Rani and Abdulla, Mahmood Ameen and Sabaratnam, Vikineswary (2015) Lentinus squarrosulus (Mont.) mycelium enhanced antioxidant status in rat model. Drug Design, Development and Therapy, 9. pp. 5957-5964. ISSN 1177-8881. (Published)

Nor Aida Zuraimi, Md Noar and Greenhow, Martin (2015) Wave Impacts on Structures with Rectangular Geometries: Part 1. Seawalls. Applied Ocean Research, 53. pp. 132-141. ISSN 0141-1187. (Published)

Nor Ain Syuhada, Zuhaimi and Vidhyaa, Paroo Indran and Mohd Asyrak, Deraman and Nor Farihan, Mudrikah and Gaanty Pragas, Maniam and Yun Hin, Taufiq-Yap and Mohd Hasbi, Ab. Rahim (2015) Reusable Gypsum Based Catalyst for Synthesis of Glycerol Carbonate from Glycerol and Urea. Applied Catalysis A: General, 502. pp. 312-319. ISSN 0926-860X. (Published)

Nor Azwadi, Che Sidik and Muhammad Noor Afiq Witri, Mohd Yazid and R., Mamat (2015) A Review on the Application of Nanofluids in Vehicle Engine Cooling System. International Communications in Heat and Mass Transfer, 68. pp. 85-90. ISSN 0735-1933. (Published)

Nor Azwadi, Che Sidik and R., Mamat (2015) Recent Progress on Lattice Boltzmann Simulation of Nanofluids: A review. International Communications in Heat and Mass Transfer, 66. pp. 11-22. ISSN 0735-1933. (Published)

Nor Rul Hasma, Abdullah and Mahaletchumi, Morgan and Ismail, Musirin (2015) Constrained Reactive Power Control (CRPC) Based Multi-Objective Optimization under Multi-Contingencies (N-m). Applied Mechanics and Materials, 785. pp. 414-418. ISSN 1662-7482. (Published)

Nor Shahirah, Mohd Nasir and Jolius, Gimbun and Sook, Fun Pang and Rossyuhaida, Mohd Zakria and Cheng, C. K. and Chua, Gek Kee and Mohd Fazli, Farida Asras (2015) Influence of Nutrient Addition on the Bioethanol Yield from Oil Palm Trunk Sap Fermented by Saccharomyces Cerevisiae. Journal of Industrial and Engineering Chemistry, 23. pp. 213-217. ISSN 1226-086X. (Published)

Nor Yazi, Khamis and Azwin Arif, Abdul Rahim and Suriya Kumar, Sinnadurai and Zarina, Mohd Ali and Zuraina, Ali (2015) ESL Educators’ Belief in Teaching English for Academic Purposes (EAP) to Low Level Learners. International Journal of Language Education and Applied Linguistics (IJLEAL), 3. pp. 63-77. ISSN 2289-7208 (print); 2289-9294 (online). (Published)

Noraini, Mohd Razali (2015) An Efficient Genetic Algorithm for Large Scale Vehicle Routing Problem Subject to Precedence Constraints. Procedia - Social and Behavioral Sciences, 195. pp. 1922-1931. ISSN 1877-0428, ESSN: 1877-0428. (Published)

Noraziah, Ahmad and Ainul Azila, Che Fauzi and Herawan, Tutut and Zailani, Abdullah (2015) Binary Vote Assignment on Cloud Quorum Algorithm for Fragmented MyGRANTS Database Replication. Wulfenia Journal, 22 (1). pp. 375-386. ISSN 1561-882X. (Published)

Noraziah, Ahmad and Muhd Azrulnizam, Suna Abdullaha and Nurzety Aqtar, Ahmad Azuan and Mohammed Adam, Ibrahim Fakharaldien and Muhammad Nubli, Abdul Wahab (2015) Greenvec Game for Skin Conductivity Level (SCL) Biofeedback Performance Simulator Using Galvanic Skin Response (GSR) Sensor. International Journal of Software Engineering & Computer Sciences (IJSECS), 1. pp. 39-52. ISSN 2289-8522. (Published)

Norazlina, Hashim and Kamal, Yusoh (2015) Supercritical Carbon Dioxide-Assisted Process In Synthesis of Polymer/Clay Melt. Macromolecular Research, 23 (5). pp. 403-417. ISSN pISSN 1598-5032 eISSN 2092-7673. (Published)

Norazlina, Hasyim and Kamal, Yusoh (2015) Supercritical Carbon Dioxide-Assisted Process in Synthesis of Polymer/Clay Melt. Macromolecular Research, 23 (5). pp. 403-417. ISSN 1598-5032. (Published)

Norfadzilah, Jusoh and R. A., Bakar and Ahmad Rasdan, Ismail and Tanti Zanariah, Shamshir Ali (2015) Computational Analysis of Thermal Building in a No-uniform Thermal Environment. Energy Procedia, 68. pp. 438-445. ISSN 1876-6102 . (Published)

Norfadzilah, Jusoh and R. A., Bakar and Ahmad Rasdan, Ismail and Tanti Zanariah, Shamshir Ali and Shamshir, Ali and Farrah Wahida, Mustafar (2015) The Impact of Thermal History on Buildings Occupants’ Thermal Assessments in Air-Conditioned Office Buildings. Journal of Advanced & Applied Sciences (JAAS), 3 (5). pp. 159-168. ISSN 2289-6260. (Published)

Norhidayah, Abdull (2015) Heavy Metal Emitting from Welding Fumes in automative Industry. International Journal of Current Research and Academic Review (2). pp. 148-156. ISSN 2347-3215. (Published)

Norhidayah, M. S. and Ahmad Rasdan, Ismail and Norhidayah, Abdullah (2015) Perception Study on Ergonomics Practices at Malaysian Quarry and Mining Industry. International Journal of Current Research and Academic Review (Sp. 2). pp. 140-147. ISSN 2347-3215. (Published)

Norida, Ridzuan and Fatmawati, Adam and Zulkefli, Yaacob (2015) Effects of Shear Rate and Inhibitors on Wax Deposition of Malaysian Crude Oil. Oriental Journal of Chemistry, 31 (4). pp. 1999-2004. ISSN 0970-020X (print); 2231-5039 (online). (Published)

Norliana, Khamisan and Kamarul Hawari, Ghazali and Aufa Huda, Muhammad Zin (2015) A thermograph image extraction based on color features for induction motor bearing fault diagnosis monitoring. ARPN Journal of Engineering and Applied Science, 10 (22). pp. 17095-17101. ISSN 1819-6608. (Published)

Norliana, Khamisan and Kamarul Hawari, Ghazali and W. L., Ching (2015) Detection of indoor air pollution on wet or moist walls using thermal image processing technique. ARPN Journal of Engineering and Applied Sciences, 10 (3). pp. 1154-1160. ISSN 1819-6608. (Published)

Norlinda, Mohd Rozar and Abdullah, Ibrahim and Muhammad Ashlyzan, Razik (2015) Using Quality Function Deployment (Qfd) in Designing the “Green Practice” of Gscm For Malaysia’s SMEs Industries. International Journal of Application or Innovation in Engineering & Management (IJAIEM), 4 (10). pp. 30-37. ISSN 2319 - 4847. (Published)

Norsharina, Ismail and Akhtar, Muhammad Nadeem and Maznah, Ismail and Seema, Zareen and Syed Adnan, Ali Shah and Nordin, Hj Lajis and Saiful Nizam, Tajuddin (2015) Neuroprotective Effect from Stem Bark Extracts of Knema Laurina Against H2O2-and Aβ1-42-induced Cell Death in Human SH-SY5Y Cells. Natural Product Research: Formerly Natural Product Letters, 29 (16). pp. 1571-1574. ISSN 1478-6419 (print); 1478-6427 (online). (Published)

Nour, A. H. and Mohamad Amirul, Anuar (2015) Biomethanation Of Sugarcane Wastewater By Ultrasonic Membrane Anaerobic System (UMAS) To Produce Methane Gas. International Journal of Engineering Sciences & Research Technology, 4 (2). pp. 1-9. ISSN 2277-9655. (Published)

Nour, A. H. and Mohd Amirul, Anuar (2015) Biomethanation of Sugarcane Wastewater by Ultrasonic Membrane Anaerobic System (UMAS) to Produce Methane Gas. International Journal of Engineering Sciences & Research Technology, 4 (2). pp. 413-419. ISSN 2277-9655. (Published)

Nour, A. H. and R. M., Yunus and Azhari, H. Nour (2015) Ultrasonic Membrane Anaerobic System (UMAS) Applications Intreating Slaughterhouse Wastewater. Australian Journal of Basic and Applied Sciences, 9 (31). pp. 79-89. ISSN 1991-8178. (Published)

Nour, A. H. and R. M., Yunus and Azhari, H. Nour and Abdulbari, Hayder A. (2015) The Potential of Ultrasonic Membrane Anaerobic Systems in Treating Slaughterhouse Wastewater. Journal of Water Reuse and Desalination, 5 (3). pp. 293-300. ISSN 2220-1319. (Published)

Nugroho, Dewayanto and Mohd Haizal, Mohd Husin and Mohd Ridzuan, Nordin (2015) Solid Fuels from Decanter Cake and Other Palm Oil Industry Waste. Jurnal Teknologi (Sciences and Engineering), 76 (5). pp. 57-60. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Nur Adillah, Abdul Razak and Sorooshian, Shahryar (2015) Case Improvement based on Lower Quality Mode and Effects Analysis. Journal of Advanced & Applied Sciences (JAAS), 3 (3). pp. 145-151. ISSN 2289-6260. (Published)

Nur Atiqah, Ramlan and Abdul Adam, Abdullah and Mohd Herzwan, Hamzah and Nur Fauziah, Jaharudin and R., Mamat (2015) Evaluation of Diesel Engine Performance and Exhaust Emission Characteristics Using Waste Cooking Oil. Applied Mechanics and Materials, 773. pp. 425-429. ISSN 1662-7482. (Published)

Nur Fahriza, M. A. and A., Zulkiple (2015) Trigger Levels on Transport Mode Choice by Using Graphical Analysis. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 44-51. ISSN 2289-697X. (Published)

Nur Fauziah, Jaharudin and Nur Atiqah, Ramlan and Mohd Herzwan, Hamzah and Abdul Adam, Abdullah and R., Mamat (2015) Study on Particulate Matter of Diesel Engine Using Waste Cooking Oil. Applied Mechanics and Materials, 773. pp. 420-424. ISSN 1662-7482. (Published)

Nur Hamizah, H. and Abdul Syukor, Abd Razak and Suryati, Sulaiman (2015) Performance of Typha Angustifolia and Lepironia Articulata for Refurbishment Domestic Wastewater in an Integrated Phytogreen System. International Journal of Innovative Science, Engineering & Technology, 2 (12). pp. 1-6. ISSN 2348-7968. (Published)

Nur Izzatie Hannah, Razman and Salasiah, Endud and Zainab, Ramli and Hendrik, Oktendy Lintang and Izan Izwan, Misnon and Hanapi, Mat (2015) Enhanced Capacitance of a Nitrogen-containing Carbon-based Nanocomposite via Noncovalent Functionalization Method. Journal of Industrial and Engineering Chemistry, 31. pp. 343-351. ISSN 1226-086X. (Published)

Nurhafizah, Abu Talip and Hayashi, Tatsuya and Taniguchi, Jun and Hiwasa, Shin (2015) Lifetime Amelioration of Antireflection Structure Molds by Means of Partial-filling Ultraviolet Nanoimprint Lithography. Microelectronic Engineering, 141. pp. 81-86. ISSN 0167-9317. (Published)

Nurhafizah, Abu Talip and Hayashi, Tatsuya and Taniguchi, Jun and Hiwasa, Shin (2015) Lifetime Amelioration of Release-Agent-Free Antireflection-Structured Replica Molds by Partial-Filling Ultraviolet Nanoimprint Lithography. Japanese Journal of Applied Physics, 54 (6S1). pp. 1-7. ISSN 0021-4922. (Published)

Nurlaila, Ismail and Nor Azah, Mohd Ali and Mailina, Jamil and Mohd Hezri Fazalul, Rahiman and Mohd Nasir, Taib and Saiful Nizam, Tajuddin (2015) Major Volatile Chemical Compounds of Agarwood Oils From Malaysia Based On Z-Score Technique. Chemistry of Natural Compounds, 51 (4). pp. 776-779. ISSN 1573-8388. (Published)

Nurrina, Rosli and Amagai, Kenji (2015) Study of Liquid Film Flow Structure on Inclined Wall Using Photochromic Dye Marking Method. Journal of JSEM, 15 (S. I.). s21-s25. ISSN 1346-4930. (Published)

Nurul, Izzah and Liu, Yao and Cheng, Jack Kie and Damhuji, Rifai (2015) Measuring Competitiveness of Islamic Banking Industry in Malaysia from the Perspective of Knowledge Management. International Journal of Industrial Management (IJIM), 1. pp. 1-9. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Nurul Ain , Jalanni and Mazrul Nizam, Abu Seman and C. K. M., Faizal (2015) New Polyester Nanofiltration (NF) Membrane for Humic Acid Removal. Advanced Materials Research, 1107. pp. 383-388. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nurul Aini, Mohd Azman and Gallego, Maria Gabriela and Julia, Luis and Fajari, Lluis and Almajano, María Pilar (2015) The Effect of Convolvulus arvensis Dried Extract as a Potential Antioxidant in Food Models. Antioxidants, 4 (1). pp. 170-184. ISSN 2076-3921. (Published)

Nurul Aini, Mohd Azman and Gordon, Michael H. and Skowyra, Monika and Segovia, Francisco and Almajano, María Pilar (2015) Use of lyophilised and powdered Gentiana lutea root in fresh beef patties stored under different atmospheres. Journal of the Science of Food and Agriculture, 95 (9). pp. 1804-1811. ISSN 1097-0010. (Published)

Nurul Azwa, Othman and Hamdan, Daniyal (2015) Investigation on Chassis Dynamometer with Capability to Test Regenerative Braking Function. International Journal of Power Electronics and Drive System (IJPEDS), 4 (3). pp. 657-664. ISSN 2088-8694 (print); 2088-8694 (online). (Published)

Nurul Azwa, Othman and Hamdan, Daniyal and Mohd. Shafie, Bakar (2015) Simulation on modified hysteresis current control in half-bridge bidirectional DC-DC converter. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9813-9818. ISSN 1819-6608. (Published)

Nurul Izzah, Mohd Shah and Liu, Yao and Damhuji, Rifai (2015) A Review of Logistic Management, Knowledge Management and E-business - How is Malaysia's E-business Development and Logistics Management Practices Now? Journal of Scienctific Research & Development, 2 (13). pp. 165-182. ISSN 1115-7569. (Published)

Nurul Nadrah Aqilah, Tukimat and Sobri, Harun (2015) Climate change impact on rainfall and temperature in Muda irrigation area using multicorrelation matrix and downscaling method. Journal of Water and Climate Change, 6 (3). pp. 647-660. ISSN 2040-2244. (Published)

Nurulasma, Zainudin and M. M., Yusoff and K. F., Chong (2015) Flow Injection Analysis Nitrite Sensor Based on Reduced Graphene Oxide Modified Electrode. Advanced Materials Research, 1113. pp. 411-416. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Debnath, U. K. and Islam, M. M. (2015) Experimental Evaluation of Erosion of Gunmetal under Asymmetrical Shaped Sand Particle. Advances in Tribology, 2015. pp. 1-31. ISSN 1687-5915. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and M. M., Rahman and Kowser, M. A. and Roy, B. K. (2015) Experimental Investigation on Friction Coefficient of Composite Materials Sliding Against SS 201 and SS 301 Counterfaces. Procedia Engineering, 105. pp. 858-864. ISSN 1877-7058. (Published)

Nuruzzaman, D. M. and Debnath, U. K. and Chowdhury, M. A. and M. M., Rahman and Roy, B. K. and Kowser, M. A. and Islam, M. M. (2015) Erosion Characteristics of Teflon under Different Operating Conditions. Journal of Polymer Engineering, 35 (9). pp. 889-904. ISSN 2191-0340. (Published)

Nuruzzaman, D. M. and Siti Nur Sakinah, Jamaludin and Farah Fazira, Kamaruzaman and Basri, S. and Nur Amira Mardian, Zulkifli (2015) Fabrication and Mechanical Properties of Aluminium-Aluminium Oxide Metal Matrix Composites. International Journal of Mechanical and Mechatronics Engineering (IJMME), 15 (6). pp. 68-75. ISSN 2227-2771 (Print); 2077-124X (Online). (Published)

Obed M., Ali and Nik Rosli, Abdullah and R., Mamat and Abdul Adam, Abdullah (2015) Comparison of the Effect of Different Alcohol Additives with Blended Fuel on Cyclic Variation in Diesel Engine. Energy Procedia, 75. pp. 2357-2362. ISSN 1876-6102 . (Published)

Obed M., Ali and R., Mamat and Awad, Omar I. (2015) Characterization of High Blended Palm Biodiesel Fuel Properties with Chemical Additive. Journal of Pure and Applied Microbiology, 9 (Sp. 2). pp. 505-512. ISSN 0973-7510. (Published)

Obed M., Ali and R., Mamat and Nik R., Abdullah and Abdul Adam, Abdullah (2015) Analysis of Blended Fuel Properties and Engine Performance with Palm Biodiesel-diesel Blended Fuel. Renewable Energy, 86. pp. 59-67. ISSN 0960-1481. (Published)

Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2015) Analysis of Blended Fuel Properties and Engine Cyclic Variations with Ethanol Additive. Journal of Biobased Materials and Bioenergy, 9 (2). pp. 108-114. ISSN 1556-6560. (Published)

Odili, Julius Beneoluchi and M. N. M., Kahar (2015) African Buffalo Optimization (ABO): A New Metaheuristic Algorithm. Journal of Advanced & Applied Sciences (JAAS), 03 (03). pp. 101-106. ISSN 2289-6260. (Published)

Odili, Julius Beneoluchi and M. N. M., Kahar and Shahid, Anwar (2015) African Buffalo Optimization: A Swarm-Intelligence Technique. Procedia Computer Science, 76. pp. 443-448. ISSN 1877-050. (Published)

Ong, Huei Ruey and Khan, Maksudur R. and Ridzuan, Ramli and R. M., Yunus (2015) Effect of CuO Nanoparticle on Mechanical and Thermal Properties of Palm Oil Based Alkyd/Epoxy Resin Blend. Procedia Chemistry, 16. pp. 623-631. ISSN 18766196. (Published)

Ong, Huei Ruey and Khan, Maksudur R. and Ridzuan, Ramli and Rahman, Md. Wasikur and R. M., Yunus (2015) Tailoring Base Catalyzed Synthesis of Palm Oil Based Alkyd Resin Through CuO Nanoparticles. RSC Advances, 5 (116). pp. 95894-95902. ISSN 2046-2069. (Published)

Ouache, Rachid and M. Nomani, Kabir and Ali, A. J. Adham (2015) A Reliability Model for Safety Instrumented System. Safety Science, 80. pp. 264-273. ISSN 09257535. (Published)

P. K., Leung and Mohd Rusllim, Mohamed and A. A., Shah and Q., Xu and M. B., Conde-Duran (2015) A Mixed Acid Based Vanadium–cerium Redox Flow Battery with a Zero-gap Serpentine Architecture. Journal of Power Sources, 274. pp. 651-658. ISSN 0378-7753. (Published)

Palaniselvam, Kuppusamy and M. M., Yusoff and Narasimha, Reddy Parine and Natanamurugaraj, Govindan (2015) Evaluation of In-vitro Antioxidant and Antibacterial Properties of Commelina nudiflora L. Extracts Prepared by Different Polar Solvents. Saudi Journal of Biological Sciences, 22 (3). pp. 293-301. ISSN 1319-562X. (Published)

Panigrahi, Shrikant and Yuserrie, Zainuddin (2015) Dividend Policy Decisions: Theoretical Views and Relevant Issues. Reports on Economics and Finance, 1. pp. 43-58. ISSN 2367-7805 (Online). (Published)

Panigrahi, Shrikant and Yuserrie, Zainuddin and Noor Azlinna, Azizan (2015) Empirical Analysis On Shareholder’s Wealth Creation Through Value Based Measurement Tools. International Journal of Industrial Management (IJIM), 1. pp. 1-11. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Panigrahi, Shrikant and Yuserrie, Zainuddin and Noor Azlinna, Azizan (2015) Empirical Analysis on Impact of Economic Value Added on Shareholder’s Value: A Perspective from Malaysian Construction Companies. Australian Journal of Basic and Applied Sciences, 9 (2). pp. 64-72. ISSN 1991-8178. (Published)

Parameswary, Sundara and Mohd Rosli, Hainin and Che Puan, Othman and Kamal Z., Zamli (2015) Influence of Darkness Dry and Darkness Rainfall on Malaysian Expressway for Traffic Characteristics using Greenshield’s Model. Journal of Basic and Applied Scientific Research, 5 (11). pp. 34-42. ISSN 2090-4304 (Print); 090-424x (Online). (Published)

Pirozzi, Domenico and Fiorentino, Nunzio and Impagliazzo, Adriana and Sannino, Filomena and Yousuf, Abu and Zuccaro, Gaetano and Fagnano, Massimo (2015) Lipid Production from Arundo Donax Grown under Different Agronomical Conditions. Renewable Energy, 77. pp. 456-462. ISSN 0960-1481. (Published)

Pirozzi, Domenico and Toscano, Giuseppe and Caputo, Gerardo and Florio, Ciro and Rugari, Felicia and Travaglini, Giuseppe and Yousuf, Abu and Zuccaro, Gaetano (2015) Effect of Nickel Contamination on the Growth of Oleaginous Yeasts in Hydrolisates of Arundo Donax. Environmental Engineering and Management Journal, 14 (7). pp. 1683-1690. ISSN 1843-3707. (Published)

Poddar, Pradeep Kumar and Gupta, Arun and Saidatul Shima, Jamari and Ng, Siew Kim and Khan, Tanveer Ahmed and Sharma, Swati and Mohd Aizudin, Abd Aziz (2015) Synthesis of Nanocellulose from Rubberwood Fibers Via Ultrasonication Combined with Enzymatic and Chemical Pretreatments. Asian Journal of Applied Sciences, 3 (5). pp. 520-527. ISSN 2321–0893. (Published)

Ponnusamy, Barath and Wong, Fei Yong and Zulkifli, Ahmad@Manap (2015) A Low Cost Automated Table Tennis Launcher. ARPN Journal of Engineering and Applied Sciences, 10 (1). pp. 291-296. ISSN 1819-6608. (Published)

Priyandoko, Gigih and Cholis, N. and Ariyono, S. (2015) Design of Single Acting Pulley Actuator (SAPA) Continuously Variable Transmission (CVT). Energy Procedia, 68. pp. 389-397. ISSN 1876-6102 . (Published)

Qamar, Wali and Azhar, Fakharuddin and Rajan, Jose (2015) Tin Oxide as a Photoanode for Dye-sensitised Solar Cells: Current Progress and Future Challenges. Journal of Power Sources, 293. pp. 1039-1052. ISSN 0378-7753. (Published)

Qamar, Wali and Azhar, Fakharuddin and Yasin, Amina and Mohd Hasbi, Ab. Rahim and Jamil, Ismail and Rajan, Jose (2015) One Pot Synthesis of Multi-functional Tin Oxide Nanostructures for High Efficiency Dye-sensitized Solar Cells. Journal of Alloys and Compounds, 646. pp. 32-39. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Qasim, Ban and Abdul Syukor, Abd Razak and Siddique, Md. Nurul Islam and Suryati, Sulaiman and Nur Hamizah, H. (2015) Controlling Assessment of Disinfection by Products in Drinking Water - A Review. International Journal of Innovative Science, Engineering & Technology, 2 (12). pp. 896-902. ISSN 2348-7968. (Published)

Qian, Long Kweh and Noor Azlinna, Azizan (2015) Efficiency Performance of General Insurance Companies in Malaysia. Journal of Advanced & Applied Sciences (JAAS), 3 (4). pp. 119-124. ISSN 2289-6260. (Published)

R., Mamat and Azmi, W. H. and G., Najafi and Ghobadian, B. and Yusaf, Talal (2015) Solar Energy in Iran: Current State and Outlook. Renewable and Sustainable Energy Reviews, 49. pp. 931-942. ISSN 1364-0321. (Published)

R., Mamat and Fayyazi, E. and Ghobadian, B. and G., Najafi and Hosseinzadeh, B. and Hosseinzadeh, J. (2015) An Ultrasound-Assisted System For The Optimization Of Biodiesel Production From Chicken Fat Oil Using A Genetic Algorithm And Response Surface Methodology. Ultrasonics Sonochemistry. ISSN 1350-4177. (In Press / Online First) (In Press / Online First)

R., Mamat and I. M., Yusri and M. K., Akasyah and O. M., Ali (2015) Combustion and Emissions Characteristics of a Compression Ignition Engine Fuelled with N-Butanol Blends. Jurnal Teknologi (Sciences and Engineering), 77 (8). pp. 69-73. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

R., Mamat and Moosavian, Ashkan and Khazaee, Meghdad and G., Najafi and Kettner, Maurice (2015) Spark Plug Fault Recognition Based on Sensor Fusion and Classifier Combination using Dempster–Shafer Evidence Theory. Applied Acoustics, 93. pp. 120-129. ISSN 0003-682X. (Published)

R., Mamat and Nor Azwadi, Che Sidik and Alawi, Omer A. (2015) Performance Analysis of Nanorefrigerants in Heated and Rotating Concentric And Eccentric Annulus Cylinders. Jurnal Teknologi (Sciences and Engineering), 77 (8). pp. 91-97. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

R., Mamat and Wan Nor Maawa, Wan Ghazali and H. H., Masjuki and G., Najafi (2015) Effects of Biodiesel from Different Feedstocks on Engine Performance and Emissions: A Review. Renewable and Sustainable Energy Reviews, 51. pp. 585-602. ISSN 1364-0321. (Published)

R. A., Bakar and Ammar Alfaiz, M. A. and Musthafah, M. T. and M. Shahir, Ali and Abdul, Muhaimin (2015) New Design of a Low Cost Small Engine Dynamometer for Engine Testing. Applied Mechanics and Materials, 699. pp. 642-647. ISSN 1662-7482. (Published)

R. A., Bakar and Musthafah, Mohd Tahir and M. S., Ali and M. A., Salim and A. M., Fudhail and M. Z., Hassan and M. S., Abdul Muhaimin (2015) Performance Analysis of a Spark Ignition Engine using Compressed Natural Gas (CNG) as Fuel. Energy Procedia, 68. pp. 355-362. ISSN 1876-6102 . (Published)

R. A., Bakar and Tanti, Ali and Billy, Anak Sup and Mohd Farid, Zainudin and Gan, Leong Ming (2015) Study on Thermal-fluid Effect of Thermal Energy Storage Tank Design in Solar Energy Applications. Energy Procedia, 68. pp. 3-11. ISSN 1876-6102 . (Published)

Rabbi, M. F. and Kamarul Hawari, Ghazali (2015) On The Cooperative and Doppler Diversity for Amplify-and-Forward Relay Network. ARPN Journal of Engineering and Applied Sciences, 10 (19). pp. 9048-9054. ISSN 1819-6608. (Published)

Rachid, Ouache and Ali, A. J. Adham (2015) Reliability Of Risk Assessment In Petrochemical Industries. International Journal of Industrial Management (IJIM), 1. pp. 1-12. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Raheem, Ajiboye Adeleke and Ruzaini, Abdullah Arshah and Hongwu, Qin and Kebbe, H. Isah (2015) Evaluating the Effect of Dataset Size on Predictive Model Using Supervised Learning Technique. International Journal of Software Engineering & Computer Sciences (IJSECS), 1. pp. 74-84. ISSN 2289-8522. (Published)

Rahman, Md. Wasikur and Alam, Jahangir and Khan, Maksudur R. (2015) Effect of Manganese on Radiation Vulcanization of Natural Rubber. International Journal of Polymer Analysis and Characterization, 20 (5). pp. 406-413. ISSN 1023-666X. (Published)

Raihatul Jannah, Ahmad and Puteri Fadzline, Muhamad Tamyez (2015) Fan Pages On The Customer-Brand Relationship and Its Motivation To Participate: A Conceptual Paper. International Journal of Industrial Management (IJIM), 1. pp. 1-11. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Raja Hamzah, Raja Ismail (2015) Mechanical Design on Cutting Tool Life. Research Gate. (Published)

Raja Mohd Taufika, Raja Ismail and That, Nguyen D. and Ha, Q. P. (2015) Modelling and Robust Trajectory Following for Offshore Container Crane Systems. Automation in Construction, 59. pp. 179-187. ISSN 0926-5805. (Published)

Rajan, Jose and Azhar, Fakharuddin and Irfan, Ahmed and Wali, Qamar and Giacomo, Di Francesco and Brown, Thomas M. (2015) Role of Morphology and Crystallinity of Nanorod and Planar Electron Transport Layers on the Performance and Long Term Durability of Perovskite Solar Cells. Journal of Power Sources, 283. pp. 61-67. ISSN 0378-7753. (Published)

Rajan, Jose and Baiju, Vidyadharan and Archana, P. S. and M. M., Yusoff and Jamil, Ismail (2015) Improved Supercapacitive Charge Storage in Electrospun Niobium Doped Titania Nanowires. RSC Advances, 5. pp. 50087-50097. ISSN 2046-2069. (Published)

Rajan, Jose and Izan Izwan, Misnon and Baiju, Vidyadharan and Jamil, Ismail and M. M., Yusoff (2015) High Performance Asymmetric Supercapacitors Using Electrospun Copper Oxide Nanowires Anode. Journal of Alloys and Compounds, 633 (5). pp. 22-30. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Rajan, Jose and Izan Izwan, Misnon and Jamil, Ismail and K. F., Chong and Vidyadharan, Baiju (2015) Doubling of Electrochemical Parameters via the Pre-intercalation of Na+ in Layered MnO2 Nanoflakes Compared to a-MnO2 Nanorods. RSC Advances, 5 (13). pp. 9667-9673. ISSN 2046-2069. (Published)

Rajan, Jose and Izan Izwan, Misnon and Nurul Khairiyyah, Mohd Zain and Radhiyah, Abd Aziz and Baiju, Vidyadharan (2015) Electrochemical Properties of Carbon from Oil Palm Kernel Shell for High Performance Supercapacitors. Electrochimica Acta, 174. pp. 78-86. ISSN 0013-4686. (Published)

Rajan, Jose and Krishnan, Syam G. and Midhun, Harilal and Baiju, Vidyadharan and Izan Izwan, Misnon and Mohd Hasbi, Ab. Rahim and Jamil, Ismail (2015) Characterization of MgCo2O4 as an Electrode for High Performance Supercapacitors. Electrochimica Acta, 161. 312-321. ISSN 0013-4686. (Published)

Raman, Nordin and Yuserrie, Zainuddin and Fuad and Rasid, Mail and Noor Kaziemah, Sariman (2015) Performance Outcomes of Strategic Management Accounting Information Usage in Malaysia: Insights from Electrical and Electronics Companies. Procedia Economics and Finance, 31. pp. 13-25. ISSN 2212-5671. (Published)

Ramaraju, Ramgopal Varma and M. Chandra, Sekhara Reddy and Veeredhi, Vasudeva Rao (2015) Experimental Investigation of Relative Performance of Water Based Tio and Zno Nanofluids in a Double Pipe Heat Exchanger. Journal on Mechanical Engineering,, 5 (1). pp. 6-11. (Published)

Rashid, Khalid T. and Sunarti, Abd Rahman and Alsalhy, Qusay (2015) Hydrophobicity Enhancement of Poly (Vinylidene Fluoride-co-Hexafluoro Propylene) for Membrane Distillation. Journal of Polymer Science and Technology, 1 (1). pp. 1-9. (Published)

Rassem, Hesham H. A. and Nour, A. H. (2015) Synthesis, Characterization and Chromogenic Properties of 4-Hydroxy-(2-Hydroxybenzylidene) Benzohydrazide. International Journal of Engineering Sciences & Research Technology, 4 (7). pp. 1036-1042. ISSN 2277-9655. (Published)

Rassem, Hesham H. A. and Nour, A. H. (2015) Synthesis, Characterization and Chromogenic Properties of Lead (II) Complexes Containing Hydrazonic Ligands. Australian Journal of Basic and Applied Sciences, 9 (31). pp. 90-102. ISSN 1991-8178. (Published)

Rassem, Taha H. and Bee, Ee Khoo (2015) Performance evaluation of new colour histogram-based interest point detectors. Multimedia Tools and Applications, 74. pp. 11357-11398. ISSN 1380-7501(Print); 1573-7721(Online). (Published)

Rassem, Taha Hussein Alaaldeen and Khoo, Bee Ee and Bayuaji, Luhur and Makbol, Nasrin M. and Suryanti, Awang and UNSPECIFIED (2015) Object and Scene Category Recognition using a Combination of Dense Color SIFT Descriptors. Australian Journal of Basic and Applied Sciences, 9 (12). pp. 93-103. ISSN 1991-8178. (Published)

Rauf, Abdul and Shahzad, Sohail Anjum and Bajda, Marek and Yar, Muhammad and Ahmed, Faiz and Hussain, Nazar and Akhtar, Muhammad Nadeem and Khan, Ajmal and Jończyk, Jakub (2015) Design and Synthesis of New Barbituric- and Thiobarbituric Acid Derivatives as Potent Urease Inhibitors: Structure Activity Relationship and Molecular Modeling Studies. Bioorganic & Medicinal Chemistry, 23 (17). pp. 6049-6058. ISSN 0968-0896. (Published)

Rebecca Ng, Shin Mei and M. H., Sulaiman and Zuriani, Mustaffa (2015) Ant Lion Optimizer for Optimal Reactive Power Dispatch Solution. Journal of Electrical Systems, Sp Iss (3). pp. 67-74. ISSN 1112-5209. (Published)

Reza, Alebrahim and Sallehuddin, Mohamed Haris and Nik Abdullah, Nik Mohamed and Shahrum, Abdullah (2015) Vibration Analysis of Self-Healing Hybrid Composite Beam Under Moving Mass. Composite Structures, 119. pp. 463-476. ISSN 0263-8223. (Published)

Risky Ayu, Kristanti and Hadibarata, Tony (2015) Biodegradation and Identification of Transformation Products of Fluorene by Ascomycete Fungi. Water, Air and Soil Pollution , 226 (12). p. 406. ISSN 0049-6979 (print); 1573-2932 (online). (Published)

Rohaida, Che Man and Ahmad Fauzi, Ismail and Nazlee Faisal, Ghazali and Siti Fatimah Zaharah, Mohd Fuzi and Rosli, Md. Illias (2015) Effects of the Immobilization of Recombinant Escherichia Coli on Cyclodextrin Glucanotransferase (CGTase) Excretion and Cell Viability. Biochemical Engineering Journal, 98. pp. 91-98. ISSN 1369-703X. (Published)

Rohaida, Romli and Shahida, Sulaiman and Kamal Z., Zamli (2015) Improving Automated Programming Assessments: User Experience Evaluation Using FaSt-generator. Procedia Computer Science, 72. pp. 186-193. ISSN 1877-0509. (Published)

Rohana, Abu and Woodley, John M. (2015) Application of Enzyme Coupling Reactions to Shift Thermodynamically Limited Biocatalytic Reactions. ChemCatChem, 7 (19). pp. 3094-3105. ISSN 1867-3899. (Published)

Roslina, Mohd Sidek and Abdul Azim, Abdul Ghani and Salmi, Baharom and Hazura, Zulzazil (2015) A Preliminary Study of Adaptive Random Testing Techniques. International Journal of Information Technology & Computer Science (IJITCS), 19 (1). pp. 116-126. ISSN 2091-1610. (Published)

Roslinazairimah, Zakaria and Nor Hafizah, Moslim (2015) Independent Gamma Variables of McKay Distribution for Rainfall Model. Journal of Computer Science & Computational Mathematics, 5 (1). pp. 9-12. ISSN 2231-8879. (Published)

Roziah, Zailan and Amir, Abdul Razak and Firdaus, Muhamad (2015) Development of Solar Oven Incorporating Thermal Energy Storage Application. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-4. ISSN 2289-697X. (Published)

Rubab, Kaniz and Abbasi, Muhammad Athar and Ur-Rehman, Aziz and Siddiqui, Sabahat Zahra and Ashraf, Muhammad and Shaukat, Ayesha and Ahmad, Irshad and Lodhi, Muhammad A. and Khan, Farman Ali and Shahid, Muhammad and Akhtar, Muhammad Nadeem (2015) Convergent synthesis of new N -substituted 2-{[5-(1H -indol-3-ylmethyl)-1,3,4-oxadiazol-2-yl]sulfanyl} acetamides as suitable therapeutic agents. Brazilian Journal of Pharmaceutical Sciences, 51 (4). pp. 931-947. ISSN 1984-8250. (Published)

S. A., Sulaiman and S., Balamohan and M., Moniruzzaman and Atnaw, Samson M. and A. O., Mohamed (2015) Feasibility Study of Gasification of Oil Palm Fronds. Journal of Mechanical Engineering and Sciences (JMES) , 9. pp. 1744-1757. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

S. F., Sagimin and Muhammad Nubli, Abdul Wahab (2015) Models of Education: In-Depth Review. International Journal of Education and Learning, 4 (2). pp. 1-8. ISSN 2234-8034. (Published)

S. J., Teoh and R. A., Bakar and Gan, Leong Ming and Mustika, Yasti (2015) Conceptual Design and Performance Analysis of Parallel Drive-Train for Hybrid Electric Motorcycle. Applied Mechanics and Materials, 699. pp. 1-8. ISSN 1662-7482. (Published)

S. Z., Sulaiman and R. M., Kasmani and A., Mustafa (2015) Effects Of Obstacles On Premixed Hydrogen-Air Mixtures Explosion In Closed Pipe. Jurnal Teknologi (Sciences and Engineering), 75 (6). pp. 109-113. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Sadiq, Ali Safa and Ghafoor, Kayhan Zrar and Lloret, Jaime and Marwan, Aziz Mohammed (2015) Improved Geographical Routing in Vehicular Ad Hoc Networks. Wireless Personal Communications, 80 (2). pp. 785-804. ISSN 0929-6212 (print); 1572-834X (online). (Published)

Sadiq, Ali Safa and Kamarulnizam, Abu Bakar and Ghafoor, Kayhan Zrar and Lloret, Jaime and Fakhreldin, Mohammed Adam Ibrahim (2015) A Developed Network Layer Handover Based Wireless Networks. International Journal of Software Engineering & Computer Sciences (IJSECS), 1. pp. 109-118. ISSN 2289-8522. (Published)

Saffuan, Wan Ahmad and Azlan, Adnan and Rozaimi, Mohd Noor and Khairunisa, Muthusamy and Sk Muiz, Sk Razak and Awang, Taib and Muhd Zulham Affandi, Mohd Zahid (2015) Attenuation Function Relationship for Far Field Earthquake Considered by Strike Slip Mechanism. Applied Mechanics and Materials, 754. pp. 897-901. ISSN 1662-7482. (Published)

Said, N. and Amalina, Roslan and Mazza Seddiq, A. Abbakar and Syafiqah , A. Khairuddin and Hajar Atirah, M. Sukri (2015) Rock Melon Activated Carbon (RMAC) for Removal of Cd(II), Ni(II) and Cu(II) from Wastewater: Kinetics and Adsorption Equilibrium. International Journal of Chemical Engineering and Applications (IJCEA), 6 (2). pp. 105-110. ISSN 2010-0221. (Published)

Said, N. and Misebah, Fatimah A. and Siti F., Haron and R. M., Yunus (2015) Transesterification Kinetics of Jatropha Methyl Ester and Trimethylol propane for Biolubricant Synthesis Using Paphiaundulata Shell Waste. Advances in Environmental Biology, 9 (1). pp. 35-43. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Said, N. and Nurul A., Rosnan and Nur S., Ghazali and Jolius, Gimbun and Nour, A. H. and Siti F., Haron (2015) Economical Biodiesel Fuel Synthesis from Castor Oil Using Mussel Shell-Base Catalyst (MS-BC). Energy Procedia, 79. 576 - 583. ISSN 1876-6102 . (Published)

Said, N. and Nurul A., Rosnan and Nur S., Ghazali and Jolius, Gimbun and Nour, A. H. and Siti F., Haron (2015) Economical biodiesel fuel synthesis from castor oil using mussel shell-base catalyst (MS-BC). Energy Procedia. ISSN 1876-6102 . (Published)

Saidatul Shima, Jamari and Suriati, Ghazali and Wan Siti Nadiah, Wan Yaacob (2015) Effect of Superabsorbent Polymer Composite Filled Carbon Fiber Towards the Germination of Abelmoschus Esculentus. Journal of Advanced Agricultural Technologies , 2 (2). pp. 156-159. ISSN 2373-423X (Print); 2301-3737 (Online). (Published)

Sajid, Muhammad Khalid Mehmood (2015) A Survey of Reading Comprehension Difficulties for Saudi Students with English Text. Journal of American Academic Research, 3 (9). pp. 52-66. ISSN 2328-1227. (Published)

Salman, Ahmad and Razman, Mat Tahar and Firdaus, Muhammad-Sukki and Abu Bakar, Munir and Ruzairi, Abdul Rahim (2015) Role of Feed-in Tariff Policy in Promoting Solar Photovoltaic Investments in Malaysia: A System Dynamics Approach. Energy, 84. pp. 808-815. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Salvinder, Singh and Shahrum, Abdullah and Nik Abdullah, Nik Mohamed and Mohd Salmi, Mohd Noorani (2015) Markov Chain Modelling of Reliability Analysis and Prediction under Mixed Mode Loading. Chinese Journal of Mechanical Engineering, 28 (2). pp. 307-314. ISSN 1000-9345. (Published)

Salvinder Singh, Karam Singh and Shahrum, Abdullah and Nik Abdullah, Nik Mohamed (2015) Reliability Analysis and Prediction of Time to Failure Distribution of an Automobile Crankshaft. Maintenance and Reliability, 17 (3). pp. 408-415. ISSN 1507-2711. (Published)

Salwani, M. S. and Adeyemi, K. D. and Sarah, S. A. and Jaya Vejayan, Palliah and Zulkifli, I. and Sazili, A. Q. (2015) Skeletal Muscle Proteome and Meat Quality of Broiler Chickens Subjected to Gas Stunning Prior Slaughter or Slaughtered Without Stunning. CyTA - Journal of Food. pp. 1-7. ISSN 1947-6337 (Print); 1947-6345 (Online). (Published)

Santhana, Krishnan and Zularisam, A. W. and Chua, Gek Kee and Chew, Few Ne and Mimi Sakinah, A. M. (2015) Optimization of Monoclonal Antibodies Purification Expressed in H-192 cells using Preparative Native-Polyacrylamide Gel Electrophoresis. Journal Of Biochemistry, Microbiology and Biotechnology , 3 (1). pp. 21-25. ISSN 2289-5779. (Published)

Sarkar, Shaheen M. and Lutfor, M. R. and M. M., Yusoff (2015) Heck, Suzuki and Sonogashira Cross-coupling Reactions using ppm level of SBA-16 supported Pd-complex. New Journal of Chemistry, 39 (5). pp. 3564-3570. ISSN 1144-0546. (Published)

Sarkar, Shaheen M. and Lutfor, M. R. and M. M., Yusoff (2015) Highly Active Thiol-functionalized SBA-15 Supported Palladium catalyst for Sonogashira and Suzuki-Miyaura Cross-coupling Reactions. RSC Advances, 5. pp. 1295-1300. ISSN 2046-2069. (Published)

Sarkar, Shaheen M. and Lutfor, M. R. and M. M., Yusoff (2015) Pyridinyl Functionalized MCM-48 Supported Highly Active Heterogeneous Palladium Catalyst for Crosscoupling Reactions. RSC Advances, 5 (25). pp. 19630-19637. ISSN 2046-2069. (Published)

Sarkar, Shaheen M. and M. M., Yusoff and Lutfor, M. R. (2015) Mesoporous Silica MCM-41 Supported N-Heterocyclic Carbene-Pd Complex for Heck and Sonogashira Coupling Reactions. Journal of the Chinese Chemical Society, 62 (1). pp. 33-40. ISSN 0009-4536 (print); 2192-6549 (online). (Published)

Sarkar, Shaheen M. and Md. Eaqub, Ali and Islam, Md. Shahrul and Lutfor, M. R. and Rashid, S. S. and Karim, Md. Rezaul and M. M., Yusoff (2015) Mesoporous Silica-Supported Sulfonyldiamine Ligand for Microwave-Assisted Transfer Hydrogenation. Journal of Nanomaterials, 2015 (674752). pp. 1-6. ISSN 1687-4110 (print); 1687-4129 (online). (Published)

Sarsaifi, Kazhal and Abd Wahid, Haron and Jaya Vejayan, Palliah and Rosnina, Yusoff and Homayoun, Hani and Mohamed Ariff, Omar and Lai, Wei Hong and Nurhusien, Yimer and Tan, Ying Ju and Abas Mazni, Othman (2015) Two-dimensional Polyacrylamide Gel Electrophoresis of Bali Bull (Bos javanicus) Seminal Plasma Proteins and their Relationship with Semen Quality. Theriogenology, 84 (6). pp. 956-968. ISSN 0093-691X. (Published)

Sarsaifi, Kazhal and Jaya Vejayan, Palliah and Abd Wahid, Haron and Rosnina, Yusoff and Homayoun, Hani and Mina, Rasoli and Mohamed Ariff, Omar and Abas Mazni, Othman (2015) Protein Profile and Functionality of Spermatozoa from Two Semen Collection Methods in Bali Bulls. Livestock Science, 172. pp. 96-105. ISSN 1871-1413. (Published)

Seydametova, Emine (2015) Novel Pravastatin-Producing Penicillium janthinellum Strain Isolated from Soil. International Journal of Bioscience, Biochemistry and Bioinformatics, 5 (2). pp. 80-90. ISSN 2010-3638. (Published)

Shahab, Suhail Najm and Abdulkafi, Ayad Atiyah and Ayib Rosdi, Zainun (2015) Assessment of Area Energy Efficiency of LTE Macro Base Stations in Different Environments. Journal of Telecommunications and Information Technology, 1. pp. 59-66. ISSN 1509-4553 (print); 1899-8852 (online). (Published)

Shahabaldin, Rezania and Mohd Fadhil, Md Din and Shazwin, Mat Taib and Farrah Aini, Dahalan and Ahmad Rahman, Songip and Singh, Lakhveer and Hesam, Kamyab (2015) The Efficient Role of Aquatic Plant (Water Hyacinth) in Treating Domestic Wastewater in Continuous System. International Journal of Phytoremediation. ISSN 1522-6514 (print); 1549-7879 (online). (Published)

Shahidah, Hamzah and Muhammad Nubli, Abdul Wahab (2015) The Relationship Between Dicipline and Student Performance Using Heart Rate Variability (HRV) Biofeedback. Research Journal of Social Science & Management, 5 (8). pp. 91-95. ISSN 2251-1571. (Published)

Shahidah, Hamzah and Muhammad Nubli, Abdul Wahab (2015) The Relationship Between Sub-Element of Integrity With Student Achievement Using Breathing. Research Journal of Social Science & Management, 5 (1). pp. 145-151. ISSN 2251-1571. (Published)

Shamsudin, Norazidah and Mohammed, Mustafa Omar (2015) Performance Direction towards Performance Achievement: Case on Local Islamic Banks in Malaysia. Journal of Economics, Business and Management, 3 (9). pp. 889-893. ISSN 2301-3567. (Published)

Shamsul, Zakaria and Morshuis, Peter H. F. and Benslimane, Mohamed Yahia and Yu, Liyun and Skov, Anne Ladegaard (2015) The Electrical Breakdown Strength of Pre-stretched Elastomers, with and without Sample Volume Conservation. Smart Materials and Structures, 24 (5). pp. 1-10. ISSN 0964-1726. (Published)

Shamsul, Zakaria and Yu, Liyun and Kofod, Guggi and Skov, Anne Ladegaard (2015) The Influence of Static Pre-stretching on the Mechanical Ageing of Filled Silicone Rubbers for Dielectric Elastomer Applications. Materials Today Communications, 4 (Sept.). 204 - 213. ISSN 2352-4928. (Published)

Shatat, M. R. and Ali, Gomaa A. M. and Tantawy, M. A. (2015) Hydration Characteristics and Immobilization of Cr (VI) in Slag Cement-CKD Pastes under Hydrothermal Treatment. Journal of Wuhan University of Technology-Mater. Sci. Ed., 30 (5). pp. 1013-1019. ISSN 1000-2413 (Print); 1993-0437 (Online). (Published)

Shoriya Aruni, Abdul Manaf and Roy, Partha and Sharma, K. V. and Zainab, Ngaini and Victor, Malgras and Aldalbahi, Ali and Alshehri, Saad M. and Yamauchi, Yusuke and Hegde, Gurumurthy (2015) Catalyst-free Synthesis of Carbon Nanospheres for Potential Biomedical Applications: Waste to Wealth Approach. RSC Advances, 5 (31). pp. 24528-24533. ISSN 2046-2069. (Published)

Siddique, Md. Nurul Islam and Mimi Sakinah, A. M. and Zularisam, A. W. (2015) Feasibility Analysis of Anaerobic Co-Digestion of Activated Manure and Petrochemical Wastewater in Kuantan (Malaysia). Journal of Cleaner Production, 106. pp. 380-388. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Siddique, Md. Nurul Islam and Mimi Sakinah, A. M. and Zularisam, A. W. (2015) Role of Biogas Recirculation in Enhancing Petrochemical Wastewater Treatment Efficiency of Continuous Stirred Tank Reactor. Journal of Cleaner Production, 91. pp. 229-234. ISSN 0959-6526 (print), 1879-1786 (online). (In Press / Online First) (In Press / Online First)

Siddique, Md. Nurul Islam and Zularisam, A. W. (2015) Effect of Strong Base During Co-digestion of Petrochemical Waste Water and Cow Dung. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-4. ISSN 2289-697X. (Published)

Siddique, Md. Nurul Islam and Zularisam, A. W. and Mimi Sakinah, A. M. (2015) Influence of Flow Rate Variation On Bio-Energy Generation During Anaerobic Co-Digestion. Journal of Industrial and Engineering Chemistry, 27. pp. 44-49. ISSN 1226-086X. (Published)

Singh, Lakhveer and Zularisam, A. W. (2015) Methods for Enhancing Bio-hydrogen Production from Biological Process: A Review. Journal of Industrial and Engineering Chemistry, 21. pp. 70-80. ISSN 1226-086X. (Published)

Siregar, J. P. and Cionita, Tezara and Bachtiar, Dandi and M. R. M., Rejab (2015) Tensile Properties of Pineapple Leaf Fibre Reinforced Unsaturated Polyester Composites. Applied Mechanics and Materials, 695. pp. 159-162. ISSN 1662-7482. (Published)

Siti Ferdaus, Aspari and Law, Woon Phui and Jolius, Gimbun (2015) CFD Simulation Of Hydrodynamics In Counter-Current Spray Dryer Tower. Science Technology Progress, 1. pp. 2-5. ISSN 2454-5147. (Published)

Siti Hawa, Apandi and Ruzaini, Abdullah Arshah (2015) Validation of a Proposed Dashboard Model for Researchers In Social Research Network Sites. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 1-10. ISSN 1819-6608. (Published)

Siti Ilyani, Rani and B. A., Aziz and Jolius, Gimbun (2015) Analysis of Dust Distribution in Silo during Axial Filling using Computational Fluid Dynamics: Assessment on Dust Explosion Likelihood. Process Safety And Environmental Protection, 96. pp. 14-21. ISSN 0957-5820. (Published)

Siti Nur Atikah, Abdullah and Abdul Adam, Abdullah and Ahmad Rasdan, Ismail and B. M., Deros (2015) A Descriptive Analysis Of Factors Contributing To Bus Drivers’ Performances While Driving: A Case Study In Malaysia. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2430-2437. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Siti Nursyahirah, Ahmad Latfi and Fahmi, Samsuri (2015) Biochip Development for Biological Cells Manipulation Using DEP. ARPN Journal of Engineering and Applied Sciences, 10 (22). 17091 -17094. ISSN 1819-6608. (Published)

Siti Rabiatull Aisha, Idris and Azmah Hanim, Mohamad Ariff and Ali, Ourdjini and Saliza Azlina, Osman (2015) Thermal Cyclic Test for Sn-4Ag-0.5Cu Solders on High P Ni/Au and Ni/Pd/Au Surface Finishes. Journal of Mechanical Engineering and Sciences (JMES) , 9. pp. 1572-1579. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Siti Rabiatull Aisha, Idris and Ourdjini, Ali and Azmah Hanim, Mohamad Ariff and Saliza Azlina, Osman (2015) Development of Diffusion Barrier Layer on Copper-Printed Circuit Board Using Electroless Plating Method. International Journal of Computational Methods and Experimental Measurements, 3 (4). pp. 329-339. ISSN 2046-0546 (print); 2046-0554 (online). (Published)

Siti Rabiatull Aisha, Idris and Ourdjini, Ali and Azmah Hanim, Mohamad Ariff and Saliza Azlina, Osman (2015) Effect of Reflow Soldering Profile on Intermetallic Compound Formation. International Journal of Computer Applications in Technology, 52 (4). pp. 244-250. ISSN 0952-8091 (print); 1741-5047 (online). (Published)

Siti Roslindar, Yaziz and Maizah Hura, Ahmad and Pung, Yean Ping and Nor Hamizah, Miswan (2015) Forecasting Malaysian Gold Using a Hybrid of ARIMA and GJR-GARCH Models. Applied Mathematical Sciences, 9 (30). pp. 1491-1501. ISSN 1314-7552 (print); 1312-885X (online). (Published)

Siti Umairah, Mokhtar and Chin, S.-T. and Vijayaraghavan, R. and MacFarlane, D. R. and Drummer, O. H. and Marriott, P. J. (2015) Direct Ionic Liquid Extractant Injection for Volatile Chemical Analysis - A Gas Chromatography Sampling Technique. Green Chemistry, 17 (1). pp. 573-581. ISSN 1463-9270. (Published)

Siti Zanariah, Satari and Abdul Ghapor, Hussin and Yong Zulina, Zubairi (2015) A New Efficient Approximation for Concentration Parameter of Circular Data. Chiang Mai Journal of Science, 42 (2). pp. 528-537. ISSN 0125-2526. (Published)

Siti Zanariah, Satari and Yong Zulina, Zubairi and Abdul Ghapor, Hussin and Siti Fatimah, Hassan (2015) Some Statistical Characteristic of Malaysian Wind Direction Recorded at Maximum Wind Speed: 1999-2008. Sains Malaysiana, 44 (10). pp. 1521-1530. ISSN 0126-6039. (Published)

Sivarao, S. and M. J., Raguvaran and A. S., Dahlan and K., Kadirgama and M. A., Amran (2015) Air Permeability Investigation Towards Automotive Tyre Pressure Sustainability and Life Saving. ARPN Journal of Engineering and Applied Sciences, 10 (10). pp. 4404-4412. ISSN 1819-6608. (Published)

Sook, Fun Pang and M. M., Yusoff and Luqman Chuah, Abdullah and Jolius, Gimbun (2015) Ultrasonic Assisted Extraction of Phenolic and Flavonoid Content from Orthosiphon Stamineus Leaves. Science Technology Progress, 1. pp. 10-13. ISSN 2454-5147. (Published)

Sorooshian, Shahryar (2015) Alternative Method for Evaluation of DaGang Deep Drilling Applications. The Electronic Journal of Geotechnical Engineering (EJGE), 20 (Bun.13). pp. 5209-5212. ISSN 1089-3032. (Published)

Sorooshian, Shahryar and Li, Wenping and Yusof, Ismaiel (2015) Landslide Susceptibility Mapping: A Technical Note. The Electronic Journal of Geotechnical Engineering (EJGE), 20 (Bun.22). pp. 12547-12550. ISSN 1089-3032. (Published)

Su, Shiung Lam and Rock, Kee Liew and Cheng, C. K. and Chase, Howard A. (2015) Catalytic Microwave Pyrolysis of Waste Engine Oil using Metallic Pyrolysis Char. Applied Catalysis B: Environmental, 176. pp. 601-617. ISSN 0926-3373. (Published)

Sudrajad, Agung and Ahmad Fitri, Yusop (2015) Review of Electrostatic Precipitator Device for Reduce of Diesel Engine Particulate Matter. Energy Procedia, 68. pp. 370-380. ISSN 1876-6102. (Published)

Sugandha, Chahal and Jahir Hussain, Fathima Shahitha and Anuj, Kumar and M. M., Yusoff and Mohamad Syaiful Bahari, Abdull Rasad (2015) Electrospun Hydroxyethyl Cellulose Nanofibers Functionalized With Calcium Phosphate Coating for Bone Tissue Engineering. RSC Advances, 5 (37). pp. 29497-29504. ISSN 2046-2069. (Published)

Suhail Najm, Shahab and Ayib Rosdi, Zainun and Nurul Hazlina, Noordin and Ahmad Johari, Mohamad and Omar, Khaldoon A. (2015) Performance Analysis of Smart Antenna Based on MVDR Beamformer using Rectangular Antenna Array. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17132-17138. ISSN 1819-6608. (Published)

Sunardi, S. and Yudhana, Anton and Azrul, Mahfudz and Sharipah Salwa, Mohamed (2015) Echo Voltage Reflected by Turtle on Various Angles. International Journal of Advances in Intelligent Informatics , 1 (1). pp. 48-56. ISSN 2442-6571. (Published)

Sunarti, Abd Rahman and Ahmad, A. L. (2015) Evaluation of Membrane Gas Absorption Performance by Using Various of Liquid Absorbents. International Journal of Engineering and Innovative Technology (IJEIT), 4 (8). pp. 10-12. ISSN 2277-3754. (Published)

Sunarti, Abd Rahman and M. S., Abdul Wahab (2015) Development of PEBAX Based Membrane for Gas Separation: A Review. International Journal of Membrane Science and Technology, 2. pp. 78-84. ISSN 2410 -1869. (Published)

Sunarti, Abd Rahman and Wan Zulaisa Amira, Wan Jusoh (2015) Optimization of the Preparation of Hydrophobic Isotactic Polypropylene Flat Sheet Membrane by Response Surface Methodology Design. Journal of Scientific Research & Reports, 7 (5). pp. 322-337. ISSN 2320-0227. (Published)

Suria, Kupan and Kulkarni, Ajaykumar D. and Hazrulrizawati, Hamid and M. M., Yusoff (2015) Extraction of Palm Carotenes and Effect of Oxidative Degradation on β-carotene. International Journal of Engineering Research & Technology (IJERT), 4 (1). pp. 662-667. ISSN 2278-0181. (Published)

Suzanna, Ridzuan Aw and Ruzairi, Abdul Rahim and Fazlul Rahman, Mohd Yunus and Mohd Hafiz, Fazalul Rahiman and Yasmin, Abdul Wahab and Mohd Badril, Nor Shah and Jayasuman, Pusppanathan and Elmy Johana, Mohamad (2015) Sensitivity Map Generation for Conducting Strategy In Electrical Resistance Tomography. Jurnal Teknologi (Sciences and Engineering), 77 (17). pp. 91-97. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Suzanna, Ridzuan Aw and Ruzairi, Abdul Rahim and Mohd Hafiz, Fazalul Rahiman and Elmy Johana, Mohamad and Fazlul Rahman, Mohd Yunus and Yasmin, Abdul Wahab and Naizatul Shima, Mohd Fadzil and Juliza, Jamaludin (2015) Simulation Study on Electrical Resistance Tomography using Metal Wall for Bubble Detection. Jurnal Teknologi (Sciences and Engineering), 73 (6). pp. 31-35. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Suziyana, Mat Dahan and Ahmad Nazif, Noor Kamar and Rabiatul Syuhada, H. and Nurhaizan, Mohd Zainudin and Fadzida, Ismail (2015) The Determinants of Innovation in Malaysian Food Processing Small and Medium Enterprises (SMEs). Procedia Social and Behavioral Sciences. ISSN 1877-0428 (print); 1877-0428 (online). (Unpublished) (Unpublished)

Swee, Keong Yeap and Akhtar, Muhammad Nadeem and Kian, Lam Lim and Nadiah, Abu and Wan, Yong Ho and Seema, Zareen and Kiarash, Roohani and Huynh, Ky and Sheau, Wei Tan and Nordin, Lajis and Noorjahan Banu, Alitheen (2015) Synthesis of an Anthraquinone Derivative (DHAQC) and its Effect on Induction of G2/M Arrest and Apoptosis in Breast Cancer MCF-7 Cell Line. Drug Design, Development and Therapy, 9. pp. 983-992. ISSN 1177-8881. (Published)

Syarifah, Abd Rahim and Fatinah, Ab Rahman and Engku N. E. M., Nasir and Noor Ashila, Ramle (2015) Carbamazepine Co-crystal Screening with Dicarboxylic Acids Co-Crystal Formers. International Journal of Environmental, Chemical, Ecological, Geological and Geophysical Engineering, 9 (5). pp. 414-417. (Published)

T. T., Ayu and M. H., Hailu and Hagos, F. Y. and Atnaw, Samson M. (2015) Energy Audit and Waste Heat Recovery System Design for a Cement Rotary Kiln in Ethiopia: A Case Study. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2983-3002. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Taha, Khalaf Emad and Norrozila, Sulaiman (2015) A Survey of multi-biometrics and fusion levels. Indian Journal of Science and Technology, 8 (32). ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2015) An Overview on Thermal and Fluid Flow Characteristics in a Plain Plate Finned and Un-Finned Tube Banks Heat Exchanger. Renewable and Sustainable Energy Reviews, 43. pp. 363-380. ISSN 1364-0321. (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2015) Effect of Tube Spacing, Fin Density and Reynolds Number on Overall Heat Transfer Rate for In-line Configuration. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3065-3075. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2015) Experimental Study on Heat Transfer and Friction Factor in Laminar Forced Convection over Flat Tube in Channel Flow. Procedia Engineering, 105. pp. 46-55. ISSN 1877-7058. (Published)

Talib, S. F. A. and Azmi, W. H. and Irnie, Zakaria and W. A. N. W., Mohamed and A. M. I., Mamat and H., Ismail and W. R. W., Daud (2015) Thermophysical Properties of Silicon Dioxide (SiO2) in Ethylene Glycol/Water (EG/W) Mixture for Proton Exchange Membrane Fuel Cell Cooling Application. Energy Procedia, 79. pp. 366-371. ISSN 1876-6102 . (Published)

Tan, Ching Siang and Ting, Wai Soon and Shahreen, Kasim and Mohd Saberi, Mohamad and Chan, Weng Howe and Safaai, Deris and Zalmiyah, Zakaria and Zuraini, Ali Shah and Zuwairie, Ibrahim (2015) A Review of Cancer Classification Software for Gene Expression Data. International Journal of Bio-Science and Bio-Technology (IJBSBT), 7 (4). pp. 89-108. ISSN 2233-7849. (Published)

Tanti, Ali and Norfadzilah, Jusoh and R. A., Bakar and Teoh, S. J. and K., Kadirgama (2015) Thermal Effect of Thermal Energy Storage (TES) Tank for Solar Energy Application During Charging Cycle Based on the Grid Sensitivity Analysis. Energy Procedia, 79. pp. 245-251. ISSN 1876-6102 . (Published)

Tesfamariam, Dawit Abay and Bayray, Mulu and Tesfay, Meseret and Hagos, F. Y. (2015) Modeling and Experiment of Solar Crop Dryer for Rural Application. Journal of Chemical and Pharmaceutical Sciences, Sp (9). pp. 109-118. ISSN 0974-2115 . (Published)

Tesfay, A. H. and Hagos, F. Y. and Yohannes, K. G. and Nydal, O. J. (2015) Preparing Side Charging of PCM Storage: Theoretical and Experimental Investigation. IOP Conference Series: Materials Science and Engineering, 100 (012021). pp. 1-13. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Thajeel, Ekhlas Mhawi and Hamdan, Daniyal and M. H., Sulaiman (2015) Performance Analysis of Active Power Filter for Harmonic Compensation using PI-PSO. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9885-9891. ISSN 1819-6608. (Published)

Thajeel, Ekhlas Mhawi and Hamdan, Daniyal and M. H., Sulaiman and Mazin Mustafa, Mahdi (2015) Effects of Time Delay on the Performance of Harmonics Elimination in Active Power Filter. Research Journal of Applied Sciences, Engineering a nd Technology, 11 (7). pp. 770-779. ISSN 2040-7467. (Published)

Thajeel, Ekhlas Mhawi and M. H., Sulaiman and Hamdan, Daniyal (2015) Active Power Filter Based Optimum Design Of PI Controller Using Particle Swarm Optimization Method. International Journal of Energy and Power Engineering Research, 3 (2). pp. 31-36. ISSN 2289-5620. (Published)

Thamir K., Ibrahim and M. M., Rahman (2015) Optimum Performance Improvements of the Combined Cycle Based on an Intercooler–Reheated Gas Turbine. Journal of Energy Resources Technology, 137. pp. 1-11. ISSN 0195-0738 (print); 1528-8994 (online). (Published)

Theeba, M. Rajasegran and Easther, George Kiluk and Toh, Wei Kian and Foo, Qiao Lin and Lee, Pui Chee and Singh, Lakhveer (2015) Pilot Study on Development of Mobile Water Treatment System for Flood Prone Area. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 57-68. ISSN 2289-697X. (Published)

Tutut, Herawan and Haruna, Chiroma and Prima, Vitasari and Zailani, Abdullah and Maizatul Akmar, Ismail and Mohd Khalit, Othman (2015) Mining Critical Least Association Rules from Students Suffering Study Anxiety Datasets. Quality & Quantity, 49 (6). pp. 2527-2547. ISSN 0033-5177. (Published)

Uddin, M. and Alsaqour, Raed and Abdelhaq, Maha and Saeed, Rashid and Alsukour, Ola and Al-Hubaishi, Mohammed and Alahdal, Tariq (2015) Dynamic Packet Beaconing for GPSR Mobile Adhoc Position Based Routing Protocol Using Fuzzy Logic. Journal of Network and Computer Applications, 47 (1). pp. 32-46. ISSN 1084-8045. (Published)

Uddin, M. and Jamshed, Memon and M. Z. A., Rozan and Kamariah, Ismail and DzurllKanian, Daud (2015) Mentoring an Entrepreneur: Guide for a Mentor. SAGE Open. pp. 1-10. ISSN 2158-2440 (print); 2158-2440 (online). (Published)

Uddin, M. J. and M. Nomani, Kabir and Alginahi, Yasser M. (2015) Lie Group Analysis and Numerical Solution of Magnetohydrodynamic Free Convective Slip Flow of Micropolar Fluid Over a Moving Plate With Heat Transfer. Computers & Mathematics with Applications, 70 (5). pp. 846-856. ISSN 08981221. (Published)

Uddin, M. Rahim and Khan, Maksudur R. and Rahman, M. Wasikur and Yousuf, Abu and Cheng, C. K. (2015) Photocatalytic Reduction of CO2 Into Methanol Over CuFe2O4/TiO2 under Visible Light Irradiation. Reaction Kinetics, Mechanisms and Catalysis, 116 (2). pp. 589-604. ISSN 1878-5190. (Published)

Uddin, Md. Jashim and M. Nomani, Kabir and Alginahi, Yasser M. (2015) Computational Investigation of Hydromagnetic Thermo-Solutal Nanofluid Slip Flow in a Darcian Porous Medium With Zero Mass Flux Boundary Condition Using Stretching Group Transformations. Journal of Porous Media, 18 (12). pp. 1187-1200. ISSN 1091-028X. (Published)

Umi Kalsom, Masrom and Nik Aloesnita, Nik Mohd Alwi and Nor Shidrah, Mat Daud (2015) The Effects of Task Complexity on the Complexity of the Second Language Written Production. Journal of Second Language Teaching & Research, 4 (1). pp. 38-66. ISSN 2045-4031. (Published)

Umi Kalsom, Masrom and Nik Aloesnita, Nik Mohd Alwi and Nor Shidrah, Mat Daud (2015) The Role of Task Complexity And Task Motivation In Language Production. GEMA Online Journal of Language Studies, 15 (2). pp. 33-49. ISSN 1675-8021. (Published)

Umme Salma, Sultana and Mohd Ridzuan, Darun and Liu, Yao (2015) Transactional or Transformational Leadership: Which Works Best for Now? International Journal of Industrial Management (IJIM), 1. pp. 1-9. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Ummu Kulthum, Jamaludin and Docherty, Paul D. and Chase, J. Geoffrey and Shaw, Geoffrey M. (2015) Impact of Haemodialysis on Insulin Kinetics of Acute Kidney Injury Patients in Critical Care. Journal of Medical and Biological Engineering, 35 (1). pp. 125-133. ISSN 1609-0985 (print); 2199-4757 (online). (Published)

Usri, N. A. and Azmi, W. H. and R., Mamat and Abdul Hamid, K. and Najafi, G. (2015) Heat Transfer Augmentation of Al2O3 Nanofluid in 60:40 Water to Ethylene Glycol Mixture. Energy Procedia, 79. pp. 403-408. ISSN 1876-6102 . (Published)

Vo, Dai-Viet N. and Arcotumapathy, Viswanathan and Alenazey, Feraih and Al-Otaibi, Raja L. and Alotaibi, Faisal M. and Adesina, Adesoji A. (2015) Mechanistic investigation of methane steam reforming over Ce-promoted Ni/SBA-15 catalyst. Appl Petrochem Res, 5. (Published)

W. K., Chee and H. N., Lim and I., Harrison and K. F., Chong and Z., Zainal and C. H., Ng and N. M., Huang (2015) Performance of Flexible and Binderless Polypyrrole/Graphene Oxide/Zinc Oxide Supercapacitor Electrode in a Symmetrical Two-Electrode Configuration. Electrochimica Acta, 157. pp. 88-94. ISSN 0013-4686. (Published)

Wael A., Salah and Dahaman, Ishak and Basem, Abu Zneid and Amir, Abu_Al_Aish and M. S., Jadin and Anees, Abu Sneineh (2015) Implementation of PM Control Strategy for Torque Ripples Reduction in Brushless DC Motors. Electrical Engineering, 97 (3). pp. 239-250. ISSN 0948-7921. (Published)

Wahida, Amat Fadzil and Najmuldeen, Ghazi Faisal (2015) One Layer Experimental Particleboard from Oil Palm Frond Particles and Empty Fruit Bunch Fibers. International Journal of Engineering Research & Technology (IJERT), 4 (1). pp. 199-202. ISSN 2278-0181. (Published)

Walinjkar, Devavrat and A. K., Prasada Rao (2015) C-DC and MC-DC Casting of Al-alloys-A Comsol Approach. Materials Letters, 161. pp. 698-700. ISSN 0167-577X. (Published)

Wan Azlan, Wan Mohd Nowalid and A. R., Yusoff and Muhammad Adib, Shaharun (2015) Effect of lubrication conditions to the cutting force coefficients in machining process. Advanced Materials Research, 1115. pp. 55-58. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Wan Ismail, Ibrahim and Erliza, Serri and Mohd Riduwan, Ghazali (2015) Evaluation Algorithm - Based on PID Controller Design for the Unstable Systems. Journal of Engineering and Applied Sciences, 10 (23). pp. 17457-17462. ISSN 1819-6608. (Published)

Wan Mohd Hafizuddin, Wan Yussof and Syamsutajri, Syamsol Bahri and Harvey, Adam P. (2015) Kinetic Modeling of Transesterification of Triacetin Using Synthesized Ion Exchange Resin (SIERs). International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 9 (1). pp. 99-103. (Published)

Wen-Min, Lu and Yuhani, Yusof and Norhayati, Rosli and Mudabera, Mohammad Hassan (2015) Modelling the Behaviour of Single Stage Splicing Language: A Yusof Goode Computational Approach. Jurnal Teknologi (Sciences and Engineering), 73 (1). pp. 135-138. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Yadav, Sumit Manohar and Kamal, Yusoh (2015) Mechanical And Physical Properties of Wood-Plastic Composites Made of Polypropylene, Wood Flour and Nanoclay. International Journal of Agricultural, Forestry & Plantation (IJAFP), 1. pp. 1-10. ISSN 2462-1757. (Published)

Yasin, Amina and Rajan, Jose and M. M., Yusoff (2015) Predicting Larger Absorption Cross-Section in Porphyrin Dyes using DFT Calculations. Journal of Porphyrin and Phthalocyanines, 19 (12). pp. 1270-1278. ISSN 1088-4246 (Print); 1099-1409 (Online). (Published)

Yasin Mustafa, Ahmed and Khairul Saleh, Mohamed Sahari and Basim A., Khidhir and M., Ishak (2015) Optimization of Multi-layer Welding of Titanium Alloy. Research Journal of Applied Sciences, Engineering and Technology, 10 (9). pp. 1029-1034. ISSN 2040-7459 (Print); 2040-7467 (Online). (Published)

Yasmin, Abdul Wahab and Ruzairi, Abdul Rahim and Mohd Hafiz, Fazalul Rahiman and Leow, Pei Ling and Suzanna, Ridzuan Aw and Fazlul Rahman, Mohd Yunus and Herlina, Abdul Rahim and Herman, Wahid and Shafishuhaza, Sahlan and Mohd Amri, Md. Yunus and Norhaliza, Abdul Wahab and Azian, Abd Aziz (2015) Compatible Study on Utilizing Frequency for Non-Invasive Electrical Resistance Tomography Using COMSOL Multiphysics. Jurnal Teknologi (Sciences and Engineering), 73 (6). pp. 65-70. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Yasmin, Abdul Wahab and Ruzairi, Abdul Rahim and Mohd Hafiz, Fazalul Rahiman and Leow, Pei Ling and Suzanna, Ridzuan Aw and Fazlul Rahman, Mohd Yunus and Herlina, Abdul Rahim and Naizatul Shima, Mohd Fadzil and Mohd Zikrillah, Zawahir and Juliza, Jamaludin and Muhammad Saiful Badri, Mansor and Mohd Fadzli, Abdul Sahib and Ling, En Hong (2015) Simulation Study On Non-Homogenous System Of Non-Invasive Ert Using Comsol Multiphysics. Jurnal Teknologi (Sciences and Engineering), 77 (17). pp. 43-48. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Yasmin, Abdul Wahab and Ruzairi, Abdul Rahim and Mohd Hafiz, Fazalul Rahiman and Suzanna, Ridzuan Aw and Fazlul Rahman, Mohd Yunus and Chiew, Loon Goh and Herlina, Abdul Rahim and Leow, Pei Ling (2015) Non-invasive Process Tomography in Chemical Mixtures – A Review. Sensors and Actuators B: Chemical, 210. pp. 602-617. ISSN 0925-4005. (Published)

Yasmin, Abdul Wahab and Ruzairi, Abdul Rahim and Mohd Hafiz, Fazalul Rahiman and Suzanna, Ridzuan Aw and Fazlul Rahman, Mohd Yunus and Goh, Chiew Loon and Herlina, Abdul Rahim and Leow, Pei Ling (2015) Non-Invasive Process Tomography in Chemical Mixtures - A Review. Sensors and Actuators, B: Chemical, 210. pp. 602-617. ISSN 0925-4005. (Published)

Yogeswaran, Muthusamy and K., Kadirgama and M. M., Rahman and D., Ramasamy and M. M., Noor (2015) Effect of ZnO Nano Materials on Grinding Surface Finishing. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2829-2843. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Yong, Ying Mei and Lee, Chia Kuang (2015) Types of Linguistic Error on Mandarin Time Phrase Construction among Malay Learners. International Journal of Language Education and Applied Linguistics (IJLEAL), 2. pp. 3-15. ISSN 2289-7208 (print); 2289-9294 (online). (Published)

Youventharan, Duraisamy and Airey, David (2015) Performance of Biocemented Sydney Sand using ex-situ mixing technique. DFI Journal: The Journal of the Deep Foundations Institute, 9 (1). pp. 48-56. ISSN 1937-5247 (print); 1937-5255 (online). (Published)

Yusra Yaseen, Lazim and Noor Azlinna, Azizan and Sorooshian, Shahryar (2015) How are the Performance of Small Businesses Influenced by HRM Practices and Governmental Support? Mediterranean Journal of Social Sciences, 6 (1). pp. 97-108. ISSN 2039-9340(Print); 2039-2117(Online) . (Published)

Yusra Yaseen , Lazim and Noor Azlinna, Azizan and Sorooshian, Shahryar (2015) Regression Factors of Small Businesses Performance: Conceptual Model. International Journal of Industrial Management (IJIM), 1. pp. 1-7. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Z. M., Hafizi and Epaarachchi, J. and Lau, K. T. (2015) Impact Location Determination on Thin Laminated Composite Plates Using an NIR-FBG Sensor System. Measurement, 61. pp. 51-57. ISSN 0263-2241. (Published)

Zaenab, S. Majeed and Zailin Shah, Yusoff (2015) Are We ‘Smarter’ Now? Case Study of Smart School Implementation in a Developing Nation. Journal of Studies in Education, 5 (3). pp. 236-258. ISSN 2162-6952. (Published)

Zahari, Taha and Anwar, P. P. A. Majeed and Mohd Yashim, Wong Paul Tze and Abdul Ghaffar, Abdul Rahman (2015) Preliminary Investigation on the Development of a Lower Extremity Exoskeleton for Gait Rehabilitation: A Clinical Consideration. Journal of Medical and Bioengineering, 4 (1). pp. 1-6. ISSN 2301-3796. (Published)

Zahari, Taha and Deboucha, Abdelhakim and Ahamed, Nizam Uddin and Anwar, P. P. A. Majeed and Wong, Yashim (2015) IIR Filter Order and Cut-off Frequency Influences on EMG Signal Smoothing. Biomedical Research (India), 26 (4). pp. 616-620. ISSN 0970-938X . (Published)

Zahari, Taha and Kun, Liu and Wang, Hongrui and Xiao, Jinzhuang (2015) Analysis of Human Standing Balance by Largest Lyapunov Exponent. Computational Intelligence and Neuroscience, 2015. pp. 1-10. ISSN 1687-5265 (print); 1687-5273 (online). (Published)

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Iskandar, Hasanuddin (2015) Analytical Modelling of Soccer Heading. Sadhana, 40 (5). pp. 1567-1578. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Zahari, Taha and Salaam, H. A. and Phoon, Sin Ye and T. M. Y. S., Tuan Ya and Mohd Razali, Mohamad (2015) Application of integrated sustainability assessment: Case study of a screw design. International Journal of Industrial Engineering, 22 (1). pp. 1-10. ISSN 1943-670X. (Published)

Zaid, Rubaiyi M. and Chong, Fui Chin and Teo, Ellie Yi Lih and Ng, Eng-Poh and Chong, Kwok Feng (2015) Reduction of graphene oxide nanosheets by natural beta carotene and its potential use as supercapacitor electrode. Arabian Journal of Chemistry, 8 (4). pp. 560-569. ISSN 18785352. (Published)

Zainah, Md. Zain and Nur Fadzillah, Harun (2015) Backstepping Control Strategy For An Underactuated X4-AUV. Jurnal Teknologi (Sciences and Engineering), 74 (9). pp. 17-23. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Zamri, Mohamed (2015) Tire Cavity Resonance Mitigation using Acoustic Absorbent Materials. Journal of Vibration and Control. ISSN 1077-5463 (print); 1741-2986 (online). (Published)

Zamri, Mohamed and Wang, Xu (2015) A Study of Tyre Cavity Resonance and Noise Reduction using Inner Trim. Mechanical Systems and Signal Processing, 50-51. pp. 498-509. ISSN 0888-3270. (Published)

Zatul Iffah, Mohd Arshad and Azura, Amid and Muhd. Ezza Faiez, Othman (2015) Comparison of Different Cell Disruption Methods And Cell Extractant Buffers For Recombinant Bromelain Expressed in E.COLI BL21-A1. Jurnal Teknologi (Sciences and Engineering), 77 (24). pp. 83-87. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Zia, Ziaurahman and Norrihan, Sulan (2015) EFL Learners’ Levels of Classroom Performance Anxieties and Their causes in Classroom Speaking Activities in Afghanistan. International Journal of English and Education, 4 (1). pp. 239-249. ISSN 2278-4012. (Published)

Zularisam, A. W. and Anwar, Ahmad (2015) Immobilized Cement Kiln Dust Enhances Biomass and Neutralizing of Palm Oil Mill Effluent for Biogas Production. Environmental Progress & Sustainable Energy, 34 (3). pp. 736-743. ISSN 1944-7442 (print); 1944-7450 (online). (Published)

Zulkifli, Ahmad@Manap and Mohd Aminuddin, Pi Remli and Mohd Haziq, Nordin and Nasrul Hadi, Johari and Z., Ghazalli and K., Kadirgama (2015) The Performance of Kicking by Different Boots Material. Journal of Human Sport and Exercise, 10 (Proc 2). pp. 657-665. ISSN 1988-5202. (Published)

Zulkifly, Jemaat and Tora, Josep Anton and Bartroli, Albert and Carrera, Julian and Perez, Julio (2015) Achievement of High Rate Nitritation with Aerobic Granular Sludge Reactors Enhanced by Sludge Recirculation Events. Frontiers of Environmental Science & Engineering, 9 (3). pp. 528-533. ISSN 2095-2201. (Published)

Zuraina, Ali (2015) A Case Study of Tertiary Students' Experiences Using Edmodo in Language Learning. International Journal of Language Education and Applied Linguistics (IJLEAL), 2. pp. 39-48. ISSN 2289-7208. (Published)

Zuriani, Mustaffa and M. H., Sulaiman (2015) Rice Predictive Analysis Mechanism Utilizing Grey Wolf Optimizer-Least Squares Support Vector Machines. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17486-17491. ISSN 1819-6608. (Published)

Zuriani, Mustaffa and M. H., Sulaiman and Yuhani, Yusof (2015) An Application of Grey Wolf Optimizer for Commodity Price Forecasting. Applied Mechanics and Materials, 785. pp. 473-478. ISSN 1662-7482. (Published)

Zuwairie, Ibrahim and Mohamad Nizam, Aliman and Fardila, Naim and Sophan Wahyudi, Nawawi and Shahdan, Sudin (2015) Performance evaluation of Black Hole Algorithm, Gravitational Search Algorithm and Particle Swarm Optimization. Malaysian Journal of Fundamental and Applied Sciences, 11 (1). pp. 10-20. ISSN 2289-5981. (Published)

Zuwairie, Ibrahim and Nor Hidayati, Abdul Aziz and Nor Azlina, Ab. Aziz and Saifudin, Razali and Mohd Ibrahim, Shapiai and Sophan Wahyudi, Nawawi and Mohd Saberi, Mohamad (2015) A Kalman Filter Approach for Solving Unimodal Optimization Problems. ICIC Express Letters, 9 (12). pp. 3415-3422. ISSN 1881-803X. (Published)

Zuwairie, Ibrahim and Sophan Wahyudi, Nawawi and Saifudin, Razali and Bakhtiar, Muhammad and K. Z. M., Azmi and Zulfakar, Aspar and Nor Azlina, Ab. Aziz (2015) Simultaneous computation of model order and parameter estimation of a heating system based on particle swarm optimization for autoregressive with exogenous model. ICIC Express Letters, 9 (4). pp. 1159-1165. ISSN 1881-803X. (Published)

Zuwairie, Ibrahim and Swee, Kuan Loha and Swee, Thing Low and Mohd Saberi, Mohamad and Safaai, Deris and Shahreen, Kasim and Choon, Yee Wen and Susilo, Bambang and Hendrawan, Yusuf and Wardani, Agustin Krisna (2015) A Review of Software for Predicting Gene Function. International Journal of Bio-Science and Bio-Technology (IJBSBT), 7 (2). pp. 57-70. ISSN 2233-7849. (Published)

Book

Addie Irawan, Hashim and et, al. (2015) Proceeding of Colloquium on Robotics, Unmanned Systems and Cybernetics 2014. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang, Malaysia. ISBN 978-967-0691-42-8

Ali, A. J. Adham (2015) Operation research methods for industrial system. Penerbit UMP, Kuantan, Pahang. ISBN 9789670691602

Azlina, Mohd Ariffin (2015) Estudiar Español Conmigo (nivel 2). Penerbit UMP, Kuantan, Pahang, pp. 1-61. ISBN 978-967-0691-50-3

Imaduddin, Abidin and Jamal Rizal, Razali and Azimi, Hamzah (2015) Transformasi belia (Trans-B): pemacu kelestarian kehidupan belia luar bandar. Penerbit UMP, Kuantan, Pahang. ISBN 9789670691411

Jahid, Hj. Sidek and Mahyuddin, Ismail (2015) Isu-isu berkaitan akidah dan syariah dalam perubatan tradisional dan komplementari. Penerbit UMP, Kuantan, Pahang. ISBN 9789670691275

Kamal Z., Zamli and Alkazemi, Basem Y. (2015) Combinatorial T-way testing. Penerbit UMP, Kuantan, Pahang. ISBN 9789670691350

Muhammad Nubli, Abdul Wahab (2015) Kit zikir untuk remaja cemerlang. Penerbit UMP, Kuantan. ISBN 9789670691190

Muhammad Nubli, Abdul Wahab (2015) Merubah diri dalam 21 minit menggunakan teknik biomaklumbalas. Penerbit UMP, Kuantan. ISBN 9789670691480

Muhammad Nubli, Abdul Wahab (2015) Modul bina insan menggunakan teknik biofeedback. Penerbit UMP, Kuantan, Pahang. ISBN 9789670691695

Muhammad Nubli, Abdul Wahab (2015) Modul rahsia hati dan perubahan diri. Penerbit UMP, Kuantan, Pahang. ISBN 9789670691718

Noor Azlinna, Azizan and Mazita, Mokhtar and Azizan, Azit and Ida Rizyani, Tahir and Siti Airin, Abdul Ghani and Wan Khairul Anuar, Wan Abdul Manan (2015) Technopreneurship Module. Pusat Keusahawanan, Universiti Malaysia Pahang, Kuantan, Pahang. ISBN 978-967-0691-40-4

Singh, Lakhveer and Zularisam, A. W. (2015) Application of immobilized cell systems in biohydrogen production. Penerbit UMP, Kuantan, Pahang. ISBN 9789670691527

Sorooshian, Shahryar and Falatoonitoosi, Elham (2015) Green supply chain. Penerbit UMP, Kuantan, Pahang. ISBN 9789670691138

Sorooshian, Shahryar and Noor Azlinna, Azizan (2015) Writing a research proposal: (for elementary research level). Penerbit UMP, Kuantan, Pahang. ISBN 9789670691299

Book Chapter

Abubakar, Adamu I. and Zeki, Akram M. and Chiroma, Haruna and Muaz, Sanah Abdullahi and Sari, Eka Novita and Herawan, Tutut (2015) Spread Spectrum Audio Watermarking Using Vector Space Projections. In: Advances in Intelligent Informatics. Advances in Intelligent Systems and Computing, 320 . Springer, Switzerland, pp. 297-307. ISBN 978-3-319-11217-6 (print); 978-3-319-11218-3 (online)

Ali, Eman N. and Ahmad Adzhim, Abdull Aziz (2015) Comparison of Biodiesel Properties Produced from Moringa oleifera Seeds Oil and Palm Oil. In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM) , Melaka, pp. 261-265. ISBN 978-967-0257-53-2

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof (2015) Wheeled Mobile Robot Path Control in a Complex Trajectory using HybridMethods. In: Recent Advances in Electrical Engineering. Recent Advances in Electrical Engineering Series, 47 . WSEAS Press, Bulgaria, pp. 38-43. ISBN 978 -1-61804- 299 -6

Azizul Helmi, Sofian and Kazuhiko, Noda (2015) The Investigation of Zinc-Rich Paint (ZRP) Behavior in NaCl Solution by Electrochemical Methods. In: The Malaysia-Japan Model on Technology Partnership : International Proceedings 2013 of Malaysia-Japan Academic Scholar Conference. Springer, Japan, pp. 3-7. ISBN 978-4-431-54438-8 (Print); 978-4-431-54439-5 (Online)

Azura, Amid and Nurul Azira, Ismail and Zatul Iffah, Mohd Arshad (2015) Case Study: Recombinant Bromelain Selection. In: Recombinant Enzymes - From Basic Science to Commercialization. Springer International Publishing, Switzerland, pp. 143-157. ISBN 978-3-319-12396-7 (Print); 978-3-319-12397-4 (Online)

Chin, Siew Choo and Doh, Shu Ing (2015) Behaviour of Reinforced Concrete Deep Beams with Openings in the Shear Zone. In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM), Melaka, pp. 107-112. ISBN 978-967-0257-53-2

Chiroma, Haruna and Abdulkareem, Sameem and Muaz, Sanah Abdullahi and Abubakar, Adamu I. and Sutoyo, Edi and Mungad , Mungad and Saadi, Younes and Sari, Eka Novita and Tutut, Herawan (2015) An Intelligent Modeling of Oil Consumption. In: Advances in Intelligent Informatics. Advances in Intelligent Systems and Computing, 320 . Springer International Publishing, Switzerland, pp. 557-568. ISBN 978-3-319-11217-6 (print); 978-3-319-11218-3 (online)

Ellie Yi, Lih Teo and M. M., Yusoff and K. F., Chong (2015) 1-Pyrenebutyric Acid Functionalized Reduced Graphene Oxide (1-Pb-Rgo) Energy Storage. In: ICGSCE 2014. Proceedings of the International Conference on Global Sustainability and Chemical Engineering . Springer, Singapore, pp. 185-193. ISBN 978-981-287-504-4 (print); 978-981-287-505-1 (online)

Faiz, Mohd Turan and Badrul, Omar (2015) Application of Integrated Fuzzy-AHP for Design Concept Evaluation: A Case Study on Mold Design Selection. In: The Malaysia-Japan Model on Technology Partnership : International Proceedings 2013 of Malaysia-Japan Academic Scholar Conference. Springer, Japan, pp. 101-113. ISBN 978-4-431-54438-8 (Print); 978-4-431-54439-5 (Online)

Imran Edzereiq, Kamarudin and M. A., Ameedeen and Zafril Rizal, M Azmi (2015) Experimental Analysis on Available Bandwidth Estimation Tools for Wireless Mesh Network. In: Advanced Computer and Communication Engineering Technology. Lecture Notes in Electrical Engineering, 315 . Springer, Switzerland, pp. 525-535. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (online)

Ismail, Abustan and Mohd Yuhyi, Mohd Tadza and Mohd Tadza, Abdul Rahman (2015) Feasability Study on Phytoremediation in Treatment of Open Landfill Leachate. In: Ecological Modelling for Sustainable Development. Proceedings Series . Penerbit Universiti Sains Malaysia, Penang. ISBN 978-983-861-501-3

Kamarul Hawari, Ghazali and Zuwairie, Ibrahim and Faradila, Naim and Kian, Sheng Lim and Salinda, Buyamin and Anita, Ahmad and Sophan Wahyudi, Nawawi and Norrima, Mokhtar (2015) An Improved VEPSO Algorithm for Multi-objective Optimisation Problems. In: The Malaysia-Japan Model on Technology Partnership. Springer, Japan, pp. 253-263. ISBN 978-4-431-54438-8 (print); 978-4-431-54439-5 (online)

Lee, Lay Khoon and Liew, Siau-Chuin and Thong, Weng Jie (2015) A Review of Image Segmentation Methodologies in Medical Image. In: Advanced Computer and Communication Engineering Technology: Proceedings of the 1st International Conference on Communication and Computer Engineering. Lecture Notes in Electrical Engineering, Pt. II (315). Springer, Switzerland, pp. 1069-1080. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (online)

Marlina, Yakno and Junita, Mohd Saleh and Bakhtiar, Affendi Rosdi (2015) Grayscale and Binary Image Enhancement of Hand Vein Images to Aid Peripheral Intravenous Access. In: New Developments In Biology, Biomedical & Chemical Engineering And Materials Science. Recent Advances in Biology and Biomedicine Series (8). INASE, Austria, pp. 60-67. ISBN 978-1-61804-284-2

Mazlan, Abu Seman and Zainorizuan, Mohd Jaini and Shahrul Niza, Mokhatar and Yuantian, Feng (2015) 2D Multi-scale Simulation and Homogenization of Foamed Concrete Containing Rubber Bars. In: InCIEC 2014:Proceedings of the International Civil and Infrastructure Engineering Conference 2014. Springer, Singapore, pp. 625-638. ISBN 978-981-287-289-0 (print); 978-981-287-290-6 (online)

Mohd Affandi, Mohd Ali and Jolius, Gimbun and Cheng, C. K. and R. M., Yunus (2015) Waste Cooking Oil Transesterification using Continuous Microwave Assisted Reactor (CMAR). In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM), Melaka, pp. 269-273. ISBN 978-967-0257-53-2

Mohd Ashraf, Ahmad and Mohd Syakirin, Ramli and Raja Mohd Taufika, Raja Ismail and Reza Ezuan, Samin (2015) Trajectory Control and Sway Suppression of a Rotary Crane System. In: Machine Vision and Mechatronics in Practice. Springer-Verlag, Berlin Heidelberg, pp. 165-175. ISBN 978-3-662-45513-5 (print); 978-3-662-45514-2 (online)

Mohd Faizal, Md Jaafar and Hamidah, M. S. and Muhd Norhasri, M. S. and Noorli, I. and Mohamad Ezad Hafez, M. P. (2015) Chloride Permeability of Nanoclayed Ultra-High Performance Concrete. In: InCIEC 2014:Proceedings of the International Civil and Infrastructure Engineering Conference 2014. Springer, Singapore, pp. 612-623. ISBN 978-981-287-289-0 (print); 978-981-287-290-6 (online)

Muddasser, Inayat and Shaharin, A. Sulaiman and Aini, Abd Jamil and Fiseha, M. Guangul and Atnaw, Samson M. (2015) The Study of Temperature Profile and Syngas Flare in Co-gasification of Biomass Feedstock in Throated Downdraft Gasifier. In: ICGSCE 2014 : Proceedings of the International Conference on Global Sustainability and Chemical Engineering. Springer, Singapore, pp. 203-210. ISBN 978-981-287-505-1 (online)

N., Mohd Jamil (2015) Mathematical Analysis of a Kinetic Model for Enzymatic Cellulose Hydrolysis. In: Energy and Sustainability V. WIT Press, pp. 499-510. ISBN 978-1-78466-095-6

N. A. M., Khairussaleh and Parke, G. A. R. and Imam, M. (2015) Fatigue Analysis of Cable Anchorages on Cable-Stayed Bridges. In: Multi-span Large Bridges: Proceeedings of the International Conference on Multi-span Large Bridges. CRC Press, Leiden, The Netherlands, pp. 937-946. ISBN 9781138027572

N. F., Adnan and M. F., Ghazali (2015) Detecting Leak in Gas Pipeline using Continuous Wavelet Transform and Kurtosis. In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM), Melaka, pp. 347-351. ISBN 978-967-0257-53-2

Nik Aloesnita, Nik Mohd Alwi (2015) Language Learning Performance using Engineering-Based Tasks via Text Chat. In: Contemporary Task-Based Language Teaching in Asia. Contemporary Studies in Linguistics . Bloomsbury Publishing Plc, London, pp. 193-210. ISBN 9781472572219

Noor Suraya, Romali and Muhammad @ S. A., Kushren Sulaiman and Zulkifli, Yusop and Zulhilmi, Ismail (2015) Flood Damage Assessment: A Review of Flood Stage-Damage Function Curve. In: ISFRAM 2014: Proceedings of the International Symposium on Flood Research and Management. Springer, Singapore, pp. 147-159. ISBN 978-981-287-364-4 (print); 978-981-287-365-1 (online)

Noor Zirwatul Ainee, Naharuddin and Nurul Hazlina, Noordin (2015) Parametric Analysis of a Low Profile UWB Trapezoidal Antenna for Ultra Wireless Communication System. In: Theory and Applications of Applied Electromagnetics. Springer International Publishing, Switzerland, pp. 295-304. ISBN 978-3-319-17268-2 (print), 978-3-319-17269-9 (online)

Norhidayah, Muhammad and Jasni, Mohamad Zain and Md Yazid, Mohd Saman and Mohd Fadhil, Ramle (2015) Enhancement of RSA Key Generation Using Identity. In: Advanced Computer and Communication Engineering Technology : Proceedings of the 1st International Conference on Communication and Computer Engineering. Lecture Notes in Electrical Engineering, 315 . Springer International Publishing, Switzerland, pp. 683-692. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (e-book)

Nur Sukinah, Aziz and Adzhar, Kamaludin (2015) Validation of Questionaire for Website Usability (QWU) Instrument Based on Experts Review. In: Advanced Computer and Communication Engineering Technology. Lecture Notes in Electrical Engineering, 362 . Springer International Publishing, Switzerland, pp. 891-902. ISBN 978-3-319-24582-9 (Print); 978-3-319-24584-3 (Online)

Rossyuhaida, Mohd Zakria and Chua, Gek Kee and Jolius, Gimbun and Nor Shahirah, Mohd Nasir and Sook, Fun Pang and Mohd Fazli, Farida Asras and Cheng, C. K. and Ahmad Ziad, Sulaiman (2015) Optimisation of Bioethanol Yield from Oil Palm Trunk Sap. In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM), Melaka, pp. 340-346. ISBN 978-967-0257-53-2

Thong, Weng Jie and M. A., Ameedeen (2015) A Survey of Petri Net Tools. In: Advanced Computer and Communication Engineering Technology: Proceedings of the 1st International Conference on Communication and Computer Engineering. Lecture Notes in Electrical Engineering, 315 (Ch. 51). Springer, Switzerland, pp. 537-551. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (online)

Zafril Rizal, M Azmi and M. A., Ameedeen and Imran Edzereiq, Kamarudin (2015) Multi-objective Functions in Grid Scheduling. In: Advanced Computer and Communication Engineering Technology. Lecture Notes in Electrical Engineering, 315 . Springer International Publishing, Switzerland, pp. 501-524. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (online)

Zahari, Taha and Jessnor Arif, Mat Jizat (2015) Landmark Tracking Using Unrectified Omniirectional Image for an Automated Guided Vehicle. In: Robot Intelligence Technology and Applications 3. Advances in Intelligent Systems and Computing, 345 . Springer, Switzerland, pp. 663-673. ISBN 978-3-319-16840-1 (print); 978-3-319-16841-8 (online)

Bulletin

Abdul Rahman, Ahmad (2015) Mahasiswa UMP curah bakti bersama masyarakat Laos dan Thailand. CREATE . p. 26. ISSN 1823-7487

Abdul Rahman, Ahmad (2015) More successful feats by UMP undergrads at the international scene. Quest, 13 (10). p. 12. ISSN 1985-8159

Abdul Rahman, Ahmad (2015) Pelajar UMP harumkan nama universiti di KIDE 2015. CREATE . p. 22. ISSN 1823-7487

Ahmad Hilmy, Agir (2015) Majlis Hari Raya UMP Pekan meriah. CREATE . p. 45. ISSN 1823-7487

Ahmad Hilmy, Agir (2015) UMP entrusted by Japanese company to develop algae production project in Malaysia. Quest, 13 (10). p. 12. ISSN 1985-8159

Ahmad Ziad, Sulaiman (2015) FKKSA, Petronas LDPE kongsi kepakaran tangani letupan silo dan elektrostatik. CREATE . p. 25. ISSN 1823-7487

Ahmad Ziad, Sulaiman (2015) Kursus Asas Perajurit Muda Sukarela uji ketahanan disiplin dan mental peserta. CREATE . p. 70. ISSN 1823-7487

Ahmad Ziad, Sulaiman (2015) UMP, UTM anjur partandingan Three Minutes Thesis 2015. CREATE . p. 27. ISSN 1823-7487

Amira Alia, Zulkifli (2015) Mahasiswa hulur bantuan kanak-kanak mangsa taufan Haiyan dan gelandangan di Filipina. CREATE . p. 63. ISSN 1823-7487

Asraf, Ahmad and Noor Ain Nadhirah, Zainudin (2015) Kesukarelawan Pendidikan In-Smartive di Ho Chi Minh. CREATE . p. 62. ISSN 1823-7487

Asraf, Ahmad and Nor 'Aisyatul Sakinah, Baharudin (2015) 50 fasilitator curah bakti di Kuala Berang. CREATE . p. 48. ISSN 1823-7487

Asraf, Ahmad and Nor 'Aisyatul Sakinah, Baharudin (2015) In-Smartive suntik semangat jati diri pelajar SMK Bandar Tasik. CREATE . p. 65. ISSN 1823-7487

Asraf, Ahmad and Nor 'Aisyatul Sakinah, Baharudin (2015) Kelab In-Smartive UMP bimbing calon UPSR SK Wira. CREATE . p. 43. ISSN 1823-7487

Asraf, Ahmad and Nor 'Aisyatul Sakinah, Baharudin (2015) Kesukarelawan Pendidikan Mahasiswa UMP bersama pelajar SMK Tengku Indra Putra 1. CREATE . p. 83. ISSN 1823-7487

Asraf, Ahmad and Nor 'Aisyatul Sakinah, Baharudin (2015) Projek Kilauan Mutiara bantu sekolah kluster kecemerlangan. CREATE . p. 82. ISSN 1823-7487

Asraf, Ahmad and Nor 'Aisyatul Sakinah, Baharudin (2015) Projek Kilauan Mutiara manfaatkan pelajar di negeri Perlis dan Thailand. CREATE . p. 74. ISSN 1823-7487

Azazi, Mamat (2015) 10 atlet ke Ho Chi Minh, Vietnam. CREATE . p. 84. ISSN 1823-7487

Badrul Naim, Abidin (2015) Kumpulan Dikir Barat Warisan Sri Pujangga ukir nama. CREATE . p. 50. ISSN 1823-7487

Emma Melati, Burhanuddin and Nurul Nadia, Nor Hamran (2015) UMP jalin kerjasama dengan NIU tawar program dwiijazah. CREATE . p. 19. ISSN 1823-7487

Emma Melati, Burhanuddin and Nurul Nadia, Nor Hamran (2015) UMP terokai peluang kerjasama dengan University of Houston Amerika Syarikat untuk program Teknologi Kejuruteraan. CREATE . p. 7. ISSN 1823-7487

Ernie Nurazlin, Lizam (2015) Penyelidik UMP cemerlang di PECIPTA 2015. CREATE . p. 23. ISSN 1823-7487

Ernie Nurazlin, Lizam (2015) Ump received national and international recognition for research projects. Quest, 13 (9). p. 11. ISSN 1985-8159

Ezrin Hani, Sukadarin (2015) Penyelidik FTeK dan FKASA pantau kualiti udara akibat jerebu. CREATE . p. 30. ISSN 1823-7487

Faisal, Jusoh (2015) UMP kongsi amalan terbaik penggunaan teknologi dalam P&P. CREATE . p. 40. ISSN 1823-7487

Fatmawati, Adam (2015) 4 pelajar FKKSA timba ilmu ke Turki. CREATE . p. 25. ISSN 1823-7487

Hanafi, Anuwar (2015) UMP and Gaya Naturals Sdn. Bhd. to jointly develop patchouli oil project in Pahang. Quest, 13 (10). p. 5. ISSN 1985-8159

Hazlina, Faizal (2015) MyGift programme: an initiative to generate income. Quest, 13 (10). pp. 8-9. ISSN 1985-8159

Hazlina, Faizal (2015) Ump researchers' sterling performance in British Invention Show 2015. Quest, 13 (10). p. 5. ISSN 1985-8159

Hazmin, Aris (2015) UMP anjur program pengurusan bakat staf bukan akademik. CREATE . p. 63. ISSN 1823-7487

IBM Centre of Excellence, (IBM CoE) (2015) Consultation bulletin and technical service contents for Quest magazine July-December 2015. Quest, 13 (10). p. 11. ISSN 1985-8159

Jamal Rizal, Razali and Imaduddin, Abidin (2015) Berfikir secara kritis dan kreatif. CREATE . p. 92. ISSN 1823-7487

Juliana, Mohd Ali (2015) Kolokium P&P kongsi kepakaran lahirkan graduan seimbang dan holistik. CREATE . p. 18. ISSN 1823-7487

Juliana, Mohd Ali (2015) PPTI serah sumbangan pascabanjir sempena Kempen 1 Makmum, 1 Sejadah. CREATE . p. 35. ISSN 1823-7487

Juliana, Mohd Ali (2015) Pencapaian UMP dalam P&P diiktiraf. CREATE . p. 26. ISSN 1823-7487

Laila, Zulkepele (2015) UMP appointed by Mara to conduct halal gelatine project. Quest, 13 (10). p. 4. ISSN 1985-8159

Laili, Zulkepeli (2015) Anti-Hysteria Kit launched. Quest, 13 (9). p. 5. ISSN 1985-8159

Laili, Zulkepeli (2015) UMP exploring possible collaboration with Proton. Quest, 13 (9). p. 4. ISSN 1985-8159

Magribi, Selamat (2015) PEKA 5 anjur Klinik Bot Kawalan Jauh. CREATE . p. 81. ISSN 1823-7487

Mohamad Aizat, Zaki (2015) Mahasiswa UMP jayakan Kem Interaksi Pemimpin Muda. CREATE . p. 51. ISSN 1823-7487

Mohammad Affendy, Omardin (2015) Kediaman sihat dengan terapi penyelenggaraan. CREATE . p. 74. ISSN 1823-7487

Mohd Akmal, Azhar (2015) FTeK berjaya anjur persidangan ETIC. CREATE . p. 12. ISSN 1823-7487

Mohd Ferdaus, Musa (2015) PEKA 2 anjur Kem Kecemerlangan Perintis Muda Pahang. CREATE . p. 80. ISSN 1823-7487

Mohd Nizam, Abdul Rashid (2015) UMP took part in Mosti's trade and investment mission for bio-technology in Milan, Itali. Quest, 13 (9). pp. 1-3. ISSN 1985-8159

Mohd Nizam, Abdul Rashid (2015) UMP, GIP, Biotechcorp signed a memorandum of collaboration to strengthen bio-aromatic ecosystem in Malaysia. Quest, 13 (10). p. 6. ISSN 1985-8159

Mohd Nizam, Abdul Rashid (2015) Working visit to Kebun Kota Sdn Bhd. CREATE . pp. 1-2. ISSN 1823-7487

Mohd Raizalhilmy, Mohd Rais and Azlina, Abd. Mubin (2015) UMP raih dua pingat Projek Kesukarelaan Terbaik VCORE. CREATE . p. 40. ISSN 1823-7487

Mohd Ruzaini, Hashim (2015) 50 staf tingkat pengetahuan pengurusan arkib berkesan. CREATE . p. 61. ISSN 1823-7487

Mohd Ruzaini, Hashim (2015) 60 staf sertai ULead UMP tingkat kompetensi kepimpinan staf. CREATE . p. 66. ISSN 1823-7487

Mohd Ruzaini, Hashim (2015) BLPK anjur Program Keberkatan dan Kecemerlangan Bekerja. CREATE . p. 57. ISSN 1823-7487

Mohd Ruzaini, Hashim (2015) BLPK anjur TransU sasar elemen menuju kegemilangan. CREATE . p. 69. ISSN 1823-7487

Mohd Ruzaini, Hashim (2015) BLPK anjur program kesiapsiagaan menghadapi banjir. CREATE . p. 67. ISSN 1823-7487

Mohd Ruzaini, Hashim (2015) Program Pengurusan Bakat dan Pelan Penggantian, Pemangkin ‘Menuju Kegemilangan’ UMP. CREATE . p. 68. ISSN 1823-7487

Mohd Ruzaini, Hashim (2015) Program TransU perkukuh perasaan sayang kepada universiti. CREATE . p. 64. ISSN 1823-7487

Mohd. Zaki, Ahmad (2015) UMP pamer seni pertahanan diri di pentas dunia. CREATE . p. 22. ISSN 1823-7487

Muhammad Aizat, Azed (2015) Mahasiswa UMP terpilih dalam Mobiliti Antarabangsa Mahasiswa Malaysia-Mexico. CREATE . p. 24. ISSN 1823-7487

Muhammed Fawwaz, Abdul Rasid (2015) Pelajar pendidikan khas (autisme) melawat UMP. CREATE . p. 58. ISSN 1823-7487

Nazatul Shima, Baroji (2015) Jom Baca 10 Minit dapat sambutan warga UMP. CREATE . p. 58. ISSN 1823-7487

Ngahzaifa, Ab. Ghani (2015) UMP tuan rumah dua Persidangan Antarabangsa Sistem Komputer. CREATE . p. 13. ISSN 1823-7487

Noor Afiza, Mohd. Asmi (2015) 40 mahasiswa pelajari budaya Nusantara. CREATE . p. 23. ISSN 1823-7487

Noor Afiza, Mohd. Asmi (2015) Baraqah Beggers raih kemenangan. CREATE . p. 44. ISSN 1823-7487

Noor Azlinda, Zainal Abidin (2015) Pengalaman sahabat TH di tanah suci, satu perjalanan rohani menuju Ilahi. CREATE . p. 72. ISSN 1823-7487

Noor Syahidah, Sabran and Ernie Nurazlin, Lizam (2015) Celebrating the success of UMP's leading researchers in the seventh Cendekia Bitara Award. Quest, 13 (9). pp. 8-9. ISSN 1985-8159

Nor 'Aisyatul Sakinah, Baharudin (2015) Mahasiswa bimbing pemimpin pelajar. CREATE . p. 47. ISSN 1823-7487

Nor Adzizi, Najiruddin (2015) 40 pelajar sertai cabaran ekspedisi berkayak. CREATE . p. 67. ISSN 1823-7487

Nor Adzizi, Najiruddin (2015) UMP pilih peserta bagi Pendakian Merdeka Kinabalu UMP 2015. CREATE . p. 53. ISSN 1823-7487

Nor Ilma, Mustafa Kamal (2015) UMP participation in SIFF 2015. Quest, 13 (10). p. 13. ISSN 1985-8159

Nor Saiful, Basri (2015) Pembelajaran UMP bukan sekadar di dalam dewan kuliah; Nor Saiful Basri. CREATE . p. 66. ISSN 1823-7487

Norhanani, Mohamad Nor (2015) Workshop on writing, evaluating and fine-tuning application for FRGS and PRGS Grants. Quest, 13 (9). p. 7. ISSN 1985-8159

Norhayati, Ismail (2015) Seminar Menjejak Personaliti tingkat penampilan staf. CREATE . p. 53. ISSN 1823-7487

Nur Adam, Maximillian (2015) Pusat Sukan UMP anjur Sukan Pantai dan Tasik. CREATE . p. 37. ISSN 1823-7487

Nur Najwa Farhana, Sahadan (2015) Kembara ASEAN bantu madrasah di Filipina. CREATE . p. 73. ISSN 1823-7487

Nurhidayah, Azmy (2015) FTeK lawat USQ bincang program dwi-ijazah Program Pengurusan Infrastruktur. CREATE . p. 18. ISSN 1823-7487 (Unpublished)

Nurhidayah, Azmy (2015) Program Teknologi Kejuruteraan (Pengurusan Infrastruktur) bakal diiktiraf antarabangsa. CREATE . p. 21. ISSN 1823-7487

Nurul Akma, Mohamad Rani (2015) Mahasiswa UMP dan MBM bersama komuniti Kota Pariaman. CREATE . p. 76. ISSN 1823-7487

Nurul Nadia, Nor Hamran and Wan Nur A'in, Mohd Kamal Ibrahim and Norhidayatul Akmal, Azahar (2015) FTeK anjur bengkel penyelenggaraan enjin bot bantu nelayan. CREATE . p. 45. ISSN 1823-7487

Putra Mohd Darul Ridzuan, Rosli (2015) Ump getting good tips from UTM on processes and practices involved when applying for research grant. Quest, 13 (9). p. 10. ISSN 1985-8159

Raja Allen Jordan Izzuddin Shah, Raja Baharudin (2015) Khidmat masyarakat PTMK bantu pembelajaran Kelas KAFA. CREATE . p. 38. ISSN 1823-7487

Ruzinah, Isha (2015) 10 pelajar FKKSA tempa kejayaan dalam Simposium Kejuruteraan Kimia. CREATE . p. 9. ISSN 1823-7487

Ruzinah, Isha (2015) Weerana a/p Eh Kan menang Anugerah Emas Thesis dalam Sambutan Hari Air Sedunia 2015. CREATE . p. 28. ISSN 1823-7487

Shalfarina, Shahriman (2015) 100 articles evaluated by IJAME and JMES. Quest, 13 (9). p. 13. ISSN 1985-8159

Shalfarina, Shahriman (2015) Al-Majallah menang Anugerah Buku Negara 2015. CREATE . p. 21. ISSN 1823-7487

Shalfarina, Shahriman (2015) Al-Majallah won National Book Award 2015. Quest, 13 (10). p. 2. ISSN 1985-8159

Shalfarina, Shahriman (2015) Bengkel Penulisan dan Penyediaan Modul Pengajaran tarik minat pensyarah menulis. CREATE . p. 29. ISSN 1823-7487

Shalfarina, Shahriman (2015) PUMP unveiled 21 books. Quest, 13 (9). p. 12. ISSN 1985-8159

Shalfarina, Shahriman (2015) Penerbit UMP lancar 21 buku baharu. CREATE . p. 51. ISSN 1823-7487

Shalfarina, Shahriman (2015) Penerbit UMP lancar buku Software Testing. CREATE . p. 52. ISSN 1823-7487

Shalfarina, Shahriman (2015) Penerbit dan FKM anjur Bengkel Penilaian Jurnal Scopus UMP. CREATE . p. 15. ISSN 1823-7487

Shalfarina, Shahriman (2015) UMP terima anugerah CREAM bagi penerbitan Jurnal IJAME. CREATE . p. 20. ISSN 1823-7487

Siti Nurfashiha, Mohd Yasin (2015) List of seminars/trainings by central laboratory. Quest, 13 (10). p. 10. ISSN 1985-8159

Suhana, Mohd. Nor (2015) 50 staf baharu sertai Program Transformasi Minda. CREATE . p. 58. ISSN 1823-7487

Suhana, Mohd. Nor (2015) 80 staf baharu sertai Program Orientasi. CREATE . p. 59. ISSN 1823-7487

UMP, LIB (2015) Emeritus Profesor Dr. Robin W.King dalam Syarahan Kejuruteraan Teknologi. CREATE . p. 8. ISSN 1823-7487

UMP, PNC (2015) 1,000 mahasiswa bincang hala tuju cabaran kontemporari. CREATE . p. 78. ISSN 1823-7487

UMP, PNC (2015) 12 beradik gembira terima sumbangan dalam Program Jejak Asnaf UMP. CREATE . p. 61. ISSN 1823-7487

UMP, PNC (2015) 137 staf UMP terima Anugerah Perkhidmatan Cemerlang. CREATE . p. 42. ISSN 1823-7487

UMP, PNC (2015) 18 staf sertai Bengkel Latihan Juruaudit Program Profesional UMP. CREATE . p. 43. ISSN 1823-7487

UMP, PNC (2015) 2,000 hadir Menelusuri Jejak Merdeka. CREATE . p. 55. ISSN 1823-7487

UMP, PNC (2015) 2,000 mahasiswa berjalan 10 ribu langkah. CREATE . p. 77. ISSN 1823-7487

UMP, PNC (2015) 25 hasil kajian dibentangkan dalam Persidangan Antarabangsa ICoGOIA. CREATE . p. 17. ISSN 1823-7487

UMP, PNC (2015) 45 pendaki pengamal media Pahang dan warga UMP tawan puncak Gunung Rajah. CREATE . p. 55. ISSN 1823-7487

UMP, PNC (2015) 46 staf bukan akademik terima surat kenaikan pangkat. CREATE . p. 86. ISSN 1823-7487

UMP, PNC (2015) 56 pensyarah UMP kongsi kepakaran dalam penulisan. CREATE . p. 56. ISSN 1823-7487

UMP, PNC (2015) 60 peserta kayuhan berbasikal berkunjung ke UMP Kampus Pekan. CREATE . p. 40. ISSN 1823-7487

UMP, PNC (2015) 600 sertai Larian Amal Penyayang 2.0. CREATE . p. 46. ISSN 1823-7487

UMP, PNC (2015) Alumni UMP turun padang bantu mangsa banjir Temerloh. CREATE . p. 30. ISSN 1823-7487

UMP, PNC (2015) Anugerah Kokurikulum & Sanjungan iktiraf pencapaian pelajar. CREATE . p. 50. ISSN 1823-7487

UMP, PNC (2015) Anugerah Pelajaran Diraja hadiah hari jadi istimewa Mohamad Arif. CREATE . p. 36. ISSN 1823-7487

UMP, PNC (2015) Bangunan KPU UMP Pekan mula beroperasi November 2015. CREATE . p. 10. ISSN 1823-7487

UMP, PNC (2015) Bangunan PTMK dan PBMSK di UMP Pekan siap sepenuhnya. CREATE . p. 11. ISSN 1823-7487

UMP, PNC (2015) Buku Program Majlis Perasmian Kampus Utama & Penyerahan Status Autonomi Serta Pertukaran Memorandum Dengan Rakan Industri. Program UMP . pp. 1-10. (Unpublished)

UMP, PNC (2015) Creation, Innovation, Technology and Research Exposition (CITREX). Quest, 13 (9). p. 6. ISSN 1985-8159

UMP, PNC (2015) Diari ramadan untuk warga UMP. CREATE . p. 50. ISSN 1823-7487

UMP, PNC (2015) Duta Jauhar bantu 15 usahawan wanita Johor. CREATE . p. 75. ISSN 1823-7487

UMP, PNC (2015) FKKSA anjur program QGen bantu remaja. CREATE . p. 42. ISSN 1823-7487

UMP, PNC (2015) FSKKP rai pelajar pascasiswazah. CREATE . p. 45. ISSN 1823-7487

UMP, PNC (2015) German Day @UMP 2015. Program UMP . (Unpublished)

UMP, PNC (2015) Hari Industri dan Pameran Kerjaya berasaskan sektor manfaatkan pelajar UMP. CREATE . p. 24. ISSN 1823-7487

UMP, PNC (2015) Hari Terbuka UMP sebar maklumat pengajian tinggi terhadap masyarakat. CREATE . p. 12. ISSN 1823-7487

UMP, PNC (2015) IPS anjur Bengkel Penambahbaikan Polisi dan Garis Panduan Pengajian Siswazah. CREATE . p. 44. ISSN 1823-7487

UMP, PNC (2015) Inovasi UMP hasilkan kit anti-histeria. CREATE . p. 17. ISSN 1823-7487

UMP, PNC (2015) Jejak Asnaf Kembali ke Sekolah bantu pelajar susah. CREATE . p. 54. ISSN 1823-7487

UMP, PNC (2015) Jom Makan Durian erat hubungan baik UMP dan Media. CREATE . p. 55. ISSN 1823-7487

UMP, PNC (2015) ‘Jom Masuk IPT’ buka tirai Karnival Pendidikan di Pahang. CREATE . pp. 10-11. ISSN 1823-7487

UMP, PNC (2015) Khairu Aizam bawa nama sehingga ke China. CREATE . p. 87. ISSN 1823-7487

UMP, PNC (2015) Kolaborasi industri lonjakkan kecemerlangan UMP. CREATE . pp. 4-5. ISSN 1823-7487

UMP, PNC (2015) Kolaborasi industri-akademia jalin hubungan baik. CREATE . p. 34. ISSN 1823-7487

UMP, PNC (2015) Kongsi budaya dalam Malam Antarabangsa UMP. CREATE . p. 34. ISSN 1823-7487

UMP, PNC (2015) Konvoi Berbasikal Mahasiswa hangatkan promosi Expoconvo UMP. CREATE . p. 53. ISSN 1823-7487

UMP, PNC (2015) Konvoi Merdeka UMP semarakkan sambutan bulan kemerdekaan. CREATE . p. 59. ISSN 1823-7487

UMP, PNC (2015) Kursus Masakan Empower Mahkota bantu belia dan ibu tunggal. CREATE . p. 37. ISSN 1823-7487

UMP, PNC (2015) Lebih 2,500 sukarelawan IPT bantu operasi pascabanjir. CREATE . pp. 14-15. ISSN 1823-7487

UMP, PNC (2015) Lebih 500 warga UMP berjalan 10,000 langkah. CREATE . p. 66. ISSN 1823-7487

UMP, PNC (2015) MPP UMP yang baharu angkat sumpah tunai kewajipan. CREATE . p. 72. ISSN 1823-7487

UMP, PNC (2015) Mahasiswa UMP berbakti di Pulau Tioman. CREATE . p. 64. ISSN 1823-7487

UMP, PNC (2015) Mahasiswa bergotong-royong memasak bubur asyura. CREATE . p. 79. ISSN 1823-7487

UMP, PNC (2015) Mahasiswa cipta produk dari bahan kitar semula. CREATE . p. 27. ISSN 1823-7487

UMP, PNC (2015) Majlis Iftar pelajar antarabangsa meriah. CREATE . p. 46. ISSN 1823-7487

UMP, PNC (2015) Majlis Perasmian Kampus Utama & Penyerahan Status Autonomi Serta Pertukaran Memorandum Dengan Rakan Industri. Program UMP . pp. 1-4. (Unpublished)

UMP, PNC (2015) Menteri Pendidikan Tinggi bangga dengan program Kejuruteraan Jerman UMP. CREATE . p. 6. ISSN 1823-7487

UMP, PNC (2015) Naib Canselor UMP terima Anugerah Kepimpinan Pendidikan. CREATE . p. 11. ISSN 1823-7487

UMP, PNC (2015) Nasyrah Fahida- perintis pembukaan Pusat Koordinasi GST. CREATE . p. 69. ISSN 1823-7487

UMP, PNC (2015) Ng Teck Huai terima Anugerah Pelajaran Diraja. CREATE . p. 37. ISSN 1823-7487

UMP, PNC (2015) PBMSK anjur Persidangan Zakat dalam Pembangunan Ekonomi Peringkat Kebangsaan 2015. CREATE . pp. 22-23. ISSN 1823-7487

UMP, PNC (2015) Pahang destinasi pertama Jelajah KPT 'Soaring Upwards'. CREATE . pp. 4-5. ISSN 1823-7487

UMP, PNC (2015) Pelajar tunai tanggungjawab pilih perwakilan dalam pilihan raya kampus. CREATE . p. 71. ISSN 1823-7487

UMP, PNC (2015) Pendidikan fleksibel mendokong pembelajaran sepanjang hayat. CREATE . p. 90. ISSN 1823-7487

UMP, PNC (2015) Pengarah Urusan Motorola kongsi kepakaran dengan pelajar UMP. CREATE . p. 8. ISSN 1823-7487

UMP, PNC (2015) Pensyarah FKKSA menang Anugerah TESLA IBC Cambridge bagi penerbitan biografi. CREATE . p. 19. ISSN 1823-7487

UMP, PNC (2015) Pensyarah UMP menang Anugerah Cabaran Inovasi Inklusif MOSTI. CREATE . p. 24. ISSN 1823-7487

UMP, PNC (2015) Penyelidik UMP cemerlang dalam penyelidikan dan penerbitan ilmiah. CREATE . p. 8. ISSN 1823-7487

UMP, PNC (2015) Penyelidik muda menang enam pingat di IWIS 2015 Poland. CREATE . p. 18. ISSN 1823-7487

UMP, PNC (2015) Penyelidikan UMP menang anugerah ITEX. CREATE . p. 30. ISSN 1823-7487

UMP, PNC (2015) Perisian bahasa isyarat e-MySL & MyKOD diiktiraf. CREATE . p. 26. ISSN 1823-7487

UMP, PNC (2015) Perpustakaan UMP anjur NCOAL. CREATE . p. 56. ISSN 1823-7487

UMP, PNC (2015) Persatuan Wanita UMP anjur Tazkirah Ramadan. CREATE . p. 54. ISSN 1823-7487

UMP, PNC (2015) Persidangan Antarabangsa Mekanikal UMP perkasa bidang kejuruteraan automotif. CREATE . p. 14. ISSN 1823-7487

UMP, PNC (2015) Persidangan COMRET kumpul tenaga pakar kaji nadir bumi. CREATE . p. 33. ISSN 1823-7487

UMP, PNC (2015) Peserta Latihan Kemahiran Empower ECER Iftar bersama warga UMP. CREATE . p. 41. ISSN 1823-7487

UMP, PNC (2015) Prof. Dr. Mashitah dilantik Penolong Pesuruhjaya Kehormat JPAM. CREATE . p. 59. ISSN 1823-7487

UMP, PNC (2015) Profesor Dato' Dr. Daing Nasir dilantik semula NC UMP. CREATE . p. 10. ISSN 1823-7487

UMP, PNC (2015) Profesor Kamal bincang kaedah pengujian perisian dan kaitan dengan fenomena alam semula jadi. CREATE . p. 20. ISSN 1823-7487

UMP, PNC (2015) Program Leadership Diagnostic menilai prestasi kepimpinan ketua. CREATE . p. 62. ISSN 1823-7487

UMP, PNC (2015) Program PIE tingkat penguasaan mahasiswa antarabangsa berbahasa Inggeris. CREATE . p. 27. ISSN 1823-7487

UMP, PNC (2015) Program PPRN manfaatkan industri dan usahawan. CREATE . p. 20. ISSN 1823-7487

UMP, PNC (2015) Program Penanaman Serai Wangi dan Kraftangan Jerami bantu ibu tunggal dan miskin. CREATE . p. 38. ISSN 1823-7487

UMP, PNC (2015) Program Singgah Sahur erat hubungan dengan masyarakat. CREATE . p. 47. ISSN 1823-7487

UMP, PNC (2015) Pusat Sukan anjur UMP Pekan Sports Day 2015. CREATE . p. 85. ISSN 1823-7487

UMP, PNC (2015) Sukarelawan UMP dan IKWAM serah sumbangan kepada mangsa banjir. CREATE . p. 31. ISSN 1823-7487

UMP, PNC (2015) UAE anjur Pemantapan Program Profesional bersama 15 rakan strategik. CREATE . p. 41. ISSN 1823-7487

UMP, PNC (2015) UMP Berani Berbeza Memaknakan Autonomi. CREATE . pp. 4-5. ISSN 1823-7487

UMP, PNC (2015) UMP Colour Run meriah. CREATE . p. 52. ISSN 1823-7487

UMP, PNC (2015) UMP agih sumbangan mangsa banjir Perkampungan Bukit Rangin. CREATE . p. 34. ISSN 1823-7487

UMP, PNC (2015) UMP anjur Ceramah Kenegaraan. CREATE . p. 56. ISSN 1823-7487

UMP, PNC (2015) UMP anjur Dialog Perundangan Amalan Sihir. CREATE . p. 41. ISSN 1823-7487

UMP, PNC (2015) UMP anjur Karnival Bola Keranjang Tiga Lawan Tiga IPT. CREATE . p. 52. ISSN 1823-7487

UMP, PNC (2015) UMP bakal jalin kerjasama dengan Purdue University. CREATE . p. 17. ISSN 1823-7487

UMP, PNC (2015) UMP bangunkan model kompetensi dan kepimpinan staf. CREATE . p. 60. ISSN 1823-7487

UMP, PNC (2015) UMP bantu komuniti Lipis dalam program operasi pascabanjir. CREATE . p. 32. ISSN 1823-7487

UMP, PNC (2015) UMP dan Yayasan Sabah jalin hubungan kerjasama akademik. CREATE . p. 28. ISSN 1823-7487

UMP, PNC (2015) UMP hargai jasa staf bersara. CREATE . p. 49. ISSN 1823-7487

UMP, PNC (2015) UMP hasilkan lemang meriahkan Pesta Lemang besar-besaran. CREATE . p. 44. ISSN 1823-7487

UMP, PNC (2015) UMP hulur sumbangan bantu mangsa banjir dalam kalangan pengamal media. CREATE . p. 33. ISSN 1823-7487

UMP, PNC (2015) UMP iktiraf sumbangan atlet cemerlang. CREATE . p. 54. ISSN 1823-7487

UMP, PNC (2015) UMP jalin kerjasama dengan Bosch tawar biasiswa dan latihan industri. CREATE . p. 31. ISSN 1823-7487

UMP, PNC (2015) UMP jalin kerjasama dengan Inno Bio Ventures Sdn. Bhd. CREATE . p. 32. ISSN 1823-7487

UMP, PNC (2015) UMP jalin kerjasama dengan Universiti Kazakhstan. CREATE . p. 32. ISSN 1823-7487

UMP, PNC (2015) UMP kekalkan tradisi sedia juadah berbuka puasa dalam talam. CREATE . p. 49. ISSN 1823-7487

UMP, PNC (2015) UMP lahir graduan perintis program dwiijazah Mekatronik hasil kerjasama dengan HsKA. CREATE . p. 6. ISSN 1823-7487

UMP, PNC (2015) UMP laksana Program Pengurusan Bakat ULead. CREATE . p. 65. ISSN 1823-7487

UMP, PNC (2015) UMP lancar program RCP bantu pelajar tingkat penguasaan bahasa Inggeris. CREATE . p. 35. ISSN 1823-7487

UMP, PNC (2015) UMP menjadi tanda aras terbaik pelaksanaan program OBE. CREATE . p. 25. ISSN 1823-7487

UMP, PNC (2015) UMP meterai hubungan kerjasama dengan Guizhou University. CREATE . p. 16. ISSN 1823-7487

UMP, PNC (2015) UMP meterai kerjasama dengan JKR Malaysia bagi pembangunan BIM dalam industri binaan. CREATE . p. 29. ISSN 1823-7487

UMP, PNC (2015) UMP meterai persefahaman dengan HTAA tingkat kecekapan perkhidmatan. CREATE . p. 33. ISSN 1823-7487

UMP, PNC (2015) UMP perkenal program MyGift sebagai saluran sumbangan endowmen universiti. CREATE . p. 60. ISSN 1823-7487

UMP, PNC (2015) UMP raih anugerah dan 9 pingat dalam MTE. CREATE . p. 16. ISSN 1823-7487

UMP, PNC (2015) UMP raikan bakal jemaah haji. CREATE . p. 43. ISSN 1823-7487

UMP, PNC (2015) UMP researchers shines at PECIPTA 2015. Quest, 13 (10). p. 3. ISSN 1985-8159

UMP, PNC (2015) UMP sentiasa relevan dalam pasaran pengajian tinggi negara. CREATE . p. 12. ISSN 1823-7487

UMP, PNC (2015) UMP sumbang Bubur Lambuk untuk komuniti. CREATE . p. 48. ISSN 1823-7487

UMP, PNC (2015) UMP terima 2,274 pelajar baharu. CREATE . p. 9. ISSN 1823-7487

UMP, PNC (2015) UMP teroka kerjasama dengan Universiti KAZATU Kazakhtan. CREATE . p. 15. ISSN 1823-7487

UMP, PNC (2015) UMP tuan rumah Pertandingan Debat Diraja Antara IPT. CREATE . p. 7. ISSN 1823-7487

UMP, PNC (2015) UMP, ECERDC rai pelajar cemerlang dan peserta tamat latihan kemahiran dan keusahawanan program empower ECER Mahkota. CREATE . p. 57. ISSN 1823-7487

UMP, PNC (2015) UMP, MUIP bantu mangsa banjir dalam Gotong-Royong Mahkota Amal. CREATE . p. 6. ISSN 1823-7487

UMP, PNC (2015) UMP, POLISAS meterai perjanjian persefahaman NoU. CREATE . p. 18. ISSN 1823-7487

UMP, PNC (2015) UMP, RTM Pahang bertemu komuniti Sungai Koyan dalam program Kembara. CREATE . p. 36. ISSN 1823-7487

UMP, PNC (2015) UMP-UNS jalin kerjasama tawar program dwiijazah Kedoktoran. CREATE . p. 14. ISSN 1823-7487

UMP, PNC (2015) UMPH anjur majlis apresiasi hargai perunding universiti. CREATE . p. 21. ISSN 1823-7487

UMP, PNC (2015) Wacana NC bentang laporan interim pencapaian universiti. CREATE . p. 16. ISSN 1823-7487

UMP, PNC (2015) Warga UMP jayakan Kempen 3R tingkat kesedaran pengurusan sisa pepejal. CREATE . p. 48. ISSN 1823-7487

UMP, PNC (2015) Warga UMP sambut Maulidur Rasul. CREATE . p. 39. ISSN 1823-7487

UMP, PNC (2015) Warga UMP semarakkan kemeriahan Expoconvo 2015. CREATE . p. 51. ISSN 1823-7487

UMP, PNC (2015) Warga kampus semarakkan Festival Bayu Kenyalang 3.0. CREATE . p. 49. ISSN 1823-7487

Yong, Ying Mei (2015) MLCC anjur Pertandingan Bertutur Bahasa Mandarin. CREATE . p. 42. ISSN 1823-7487

Zainal, Bahari (2015) Lima strategi utama mantapkan UAE. CREATE . p. 57. ISSN 1823-7487

Zainal, Bahari (2015) Program Empower ECER Mahkota bantu golongan belia kembangkan perniagaan. CREATE . p. 36. ISSN 1823-7487

Zainal, Bahari (2015) UMP, ECERDC bangunkan Medan Ikan Bakar dan Pusat Pemprosesan Hasil Laut. CREATE . p. 35. ISSN 1823-7487

Zuraina, Ali (2015) Belia perlu versatil menceburi bidang keusahawanan. CREATE . p. 64. ISSN 1823-7487

Zuryaty, Zol (2015) Pasukan Elixir Racing sekolah kluster harumkan UMP. CREATE . p. 39. ISSN 1823-7487

Zuryaty, Zol (2015) UMP-ITB anjur persidangan antarabangsa iMEC dan APSCOMS. CREATE . p. 13. ISSN 1823-7487

Conference or Workshop Item

A., Azidin and Z. A. M., Taib and W. S., Wan Harun and S. A., Che Ghani and M. F. F., Ab Rashid and M. A., Omar and H., Ramli (2015) Investigation of Mechanical Properties for Open Cellular Structure CoCrMo Alloy Fabricated by Selective Laser Melting Process. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

A., Rahimi and B., Ghobadian and G., Najafi and F., Jaliliantabar and R., Mamat (2015) Performance and Emission Parameters of Single Cylinder Diesel Engine Using Castor Oil Bio-Diesel Blended Fuels. In: IOP Conference Series: Materials Science and Engineering: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100. ISBN 1757-8981 (print); 1757-899X (online)

A. K. M., Kafi and M. M., Yusoff and S. N., Nina (2015) Fabrication of 3-dimensional Cross-linked Redox Protein/Nanomaterials. In: The 3rd International Conference on Advanced Electromaterials , 17-20 November 2015 , Jeju, Korea. p. 1.. (Unpublished)

A. N., Oumer and N. M., Hamidi and Idris, Mat Sahat (2015) Numerical Prediction of Flow Induced Fibers Orientation in Injection Molded Polymer Composites. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

A. R., Yusoff and Fitriyanti, Arsyad (2015) Evaluation of Surface Roughness and Power Consumption in Machining FCD 450 Cast Iron using Coated and Uncoated Irregular Milling Tools. In: International Manufacturing Engineering Conference 2015 , 12-14 November 2015 , Kuala Lumpur. pp. 1-8., 3 (1). ISSN 2289-697X (Unpublished)

A. S., Samsudin and M. I. N., Isa (2015) Conductivity Study on Plasticized Solid bio-electrolytes CMC-NH4Br and Application in Solid-state Proton Batteries. In: International Symposium On Sciences And Mathematics (ISYSM 2015) , 24-26 November 2015 , Bandung, Indonesia. pp. 1-6.. (Unpublished)

Abdul Alif Wafi, Ab Razak and Fahmi, Samsuri (2015) Active RFID-based Indoor Positioning System (IPS) for Industrial Environment. In: IEEE International RF and Microwave Conference (RFM 2015) , 14-16 December 2015 , Kuching, Sarawak. pp. 89-91.. ISBN 978-1-4673-8170-3

Abdul Aziz, Mohd Azoddein and R. A., Bakar and Nik Meriam, Nik Sulaiman and Ahmad Bazli, Bustary and Nur Athirah, Mohamad Basir (2015) Mercury Removal from Actual Petroleum Based Industries Wastewater by P. putida in Membrane Bioreactor. In: New Directions in Multidisciplinary Research & Practice (NDMRP 2015) , 12-13 May 2015 , Istanbul, Turkey. pp. 313-330..

Abdul Rahman, Mohd Kasim and Noraihan Afiqah, Rawi and Lim, Y. Jiann and Mukheta, Isa and Sharidan, Shafie (2015) g-Jitter Induced Free Convection of Heat and Mass Transfer Flow near a Two-Dimensional Stagnation Point in Micropolar Fluid. In: Proceedings of the 3rd International Conference on Mathematical, Computational and Statistical Science (MCSS 2015) , 22-24 February 2015 , Dubai, UAE. pp. 254-262., 40. ISSN 978-1-61804-275-0 ISBN 978-1-61804-275-0

Abdul Syukor, Abd Razak (2015) Relationships for Fundamental Interactions Between Aquatic Plants and Contaminants in Oxidation Pond (OP) Via Phytogreen System. In: IWA Malaysia Young Water Professionals Conference , 17-20 March 2015 , Kuala Lumpur, Malaysia. . (Unpublished)

Abdul Syukor, Abd Razak (2015) The Role of Aeration Zone in an Integrated Phytogreen System for Bod, Cod and SS Removal from Wastewater in Conventional Oxidation Pond. In: The 3rd International Conference on Water Resources (ICWR 2015) , 24-25 November 2015 , Langkawi, Kedah. pp. 1-8.. (Unpublished)

Abdul Syukor, Abd Razak and Zularisam, A. W. and M. I. M., Said and S., Sulaiman and Siddique, Md. Nurul Islam (2015) Bio-sorption of Chromium using Aquatic Plant, Lepironia Articulata. In: IWA Malaysia Young Water Professionals Conference , 17-20 March 2015 , Kuala Lumpur, Malaysia. pp. 1-13.. ISSN 1995-0756(Print); 1998-1066(Online) (Unpublished)

Abdul Syukor, Abd Razak and Zularisam, A. W. and M. I. M., Said and Suryati, Sulaiman and Hasmanie, Abdul Halim (2015) The Effectiveness of Phytogreen System in Phytoremediation and Bioremediation Process to Enhance the Quality of Domestic Wastewater. In: IWA Malaysia Young Water Professionals Conference , 17-20 March 2015 , Kuala Lumpur, Malaysia. pp. 1-11., 65 (3). ISSN 1992-8645 (print); 817-3195 (online)

Abdullah, Embong and Muhammad Wasif, Nabeel (2015) Innovative Knowledge Management Collaboration Through Internet of Things. In: Prosiding NCOAL 2015 - Persidangan Kebangsaan Perpustakaan Akademik , 17-18 March 2015 , Kuantan, Pahang. pp. 117-127.. ISBN 978-967-0691-68-8 (In Press / Online First)

Abdullah, Ibrahim and Siti Aishah, Md Hasan (2015) The Development of the Malaysian Technology Content Framework towards the Establishment of the Malaysian Technology Index in Manufacturing Industry. In: International Conference on Recent Trends in Engineering Science and Management (ICRTESM-2015) , 14-16 March 2015 , New Delhi. . (Unpublished)

Abdullah, Nasser and Alsewari, Abdulrahman A. and Kamal Z., Zamli (2015) Adopting search-based algorithms for pairwise testing. In: 4th International Conference on Software Engineering and Computer Systems (ICSECS 2015) , 19-21 August 2015 , Kuantan, Pahang. pp. 124-129.. ISBN 978-146736722-6

Abdullah, Nasser and Hujainah, Fadhl and Alsewari, Abdulrahman A. and Kamal Z., Zamli (2015) Sequence and sequence-less T-way test suite generation strategy based on flower pollination algorithm. In: IEEE Student Conference on Research and Development (SCOReD 2015) , 13-14 December 2015 , Kuala Lumpur, Malaysia. pp. 676-680.. ISBN 978-146739572-4

Abdullah Adnan, Mohamed and Adelina, Asmawi and M. R., Abdul Hamid and Zainol, Mustafa (2015) Descriptive Analysis Of Context Evaluation Instrument For Technical Oral Presentation Skills Evaluation: A Case Study In English Technical Communication Course. In: AIP Conference Proceeding: The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 536., 1643. ISBN 978-0-7354-1281-1

Abid, Hussanan and Mohd Zuki, Salleh and Razman, Mat Tahar and Khan, Ilyas (2015) Thermal-Diffusion Effects on Mixed Convection Flow in a Heat Absorbing Fluid with Newtonian Heating and Chemical Reaction. In: AIP Conference Proceeding: The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 587., 1643 (1). ISBN 978-0-7354-1281-1

Addie Irawan, Hashim and Alam, Md. Moktadir (2015) Adaptive Impedance Control Based on CoM for Hexapod Robot Walking on the Bottom of Ocean. In: The 5th International Conference On Underwater System Technology (USYS'14) , 3-4 December 2014 , Melaka. .

Addie Irawan, Hashim and Alam, Md. Moktadir (2015) PD-FLC with Admittance Control for Hexapod Robot's Leg Positioning on Seabed. In: 10th Asian Control Conference (ASCC) , 31 May - 3 Jun 2015 , Kota Kinabalu, Sabah. pp. 1-5., 5 (6). ISSN 2233-7849

Addie Irawan, Hashim and Alam, Md. Moktadir (2015) PD-like FLC with Admittance Control of Hexapod Robot’s Leg Vertical Positioning for Seabed Locomotion. In: The 10th Asian Control Conference (ASCC 2015) , 31 May - 3 Jun 2015 , Kota Kinabalu, Sabah. . (Unpublished)

Addie Irawan, Hashim and Hoe, Lih Jiun and M. M., Alam (2015) Control Input Converter for Robot’s Leg Joint with Parallel Actuation Configuration. In: International Conference on Electrical and Computer Engineering (ICECE 2014) , 20-22 December 2014 , Dhaka. pp. 757-760..

Ahamed, Nizam Uddin and Altwijri, Omar and Rahaman, S. A. M. Matiur and Alqahtani, Mahdi and Ahmed, Nasim and Sundaraj, Kenneth (2015) Relation Between EMG Signal Activation and Time Lags Using Feature Analysis During Dynamic Contraction. In: 2nd IEEE International Conference on Advanced Informatics: Concepts, Theory and Applications (ICAICTA 2015) , 19-22 August 2015 , Chonburi, Thailand. pp. 1-4., 2015. ISSN 978-1-4673-8142-0 ISBN 978-1-4673-8142-0

Ahamed, Nizam Uddin and Rahman, Matiur and Alqahtani, Mahdi and Altwijri, Omar and Sundaraj, Kenneth and Ahmed, Nasim (2015) Relationship between EMG Activity and Endurance Time in the Biceps Brachii Muscle during Isokinetic Contraction. In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2014) , 23-25 November 2014 , Copthorne Hotel, Cameron Highland, Malaysia. pp. 1-7.. (In Press / Online First)

Ahmad Irfan, Ikmal Hisham (2015) Analisis Tematik Hadith Berkaitan Faqir dan Miskin Dalam Sahih Bukhari. In: Prosiding NCOZ 2015 - Persidangan Zakat Dalam Pembangunan Ekonomi Peringkat Kebangsaan 2015 = National Conference On Zakat and Economic Development 2015 , 1 June 2015 , Kuantan, Pahang. pp. 109-135.. ISBN 978-967-0691-47-3

Ahmad Irfan, Ikmal Hisham and Ishak, Suliaman (2015) Penyelewengan Fakta Mengenai Femonena Falak; Keperluan Penyelidikan Tematik Ḥadīth Berkaitan Objek Selestial Di Dalam Al-Kutub Al-Sittah. In: Seminar Antarbangsa Sunnah Nabawiah (MUSNAD III) , 27-28 Oktober 2015 , Universiti Malaya Kuala Lumpur. pp. 1-32..

Aini, Ahmad (2015) The Application of Learning Organization Idea at Malaysian University: A Case Study of University Malaysia Pahang (UMP). In: Prosiding NCOAL 2015 - Persidangan Kebangsaan Perpustakaan Akademik , 17-18 March 2015 , Kuantan, Pahang. pp. 33-41.. ISBN 978-967-0691-68-8

Aini, Ahmad and Nordin, Norhaslinda (2015) Halal Food Industries and Learning Organization. In: National Conference on Postgraduate Research 2015 (NCON-PGR 2015) , 24-25 January 2015 , Universiti Malaysia Pahang. pp. 1-5..

Aini, Ahmad and Norhaslinda, Nordin (2015) Potential Application of Learning Organization Principle in Zakat Institution in Malaysia. In: Prosiding NCOZ 2015 - Persidangan Zakat Dalam Pembangunan Ekonomi Peringkat Kebangsaan 2015 = National Conference On Zakat and Economic Development 2015 , 1 June 2015 , Kuantan, Pahang. pp. 415-425.. ISBN 978-967-0691-47-3

Aishah, Safi and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin and Mohd, Nazani (2015) Electrical energy generation from Malaysia’s annual flood event by using pumped water storage - from crisis to opportunity. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6.. (Unpublished)

Ajiboye, Adeleke Raheem and Ruzaini, Abdullah Arshah and Qin, Hongwu (2015) Using an Enhanced Feed-Forward Neural Network Technique for Prediction of Students' Performance. In: Proceedings of 3rd International Conference on Computer Science and Data Mining (ICCSDM 2015) , 20-21 May 2015 , Dubai, UAE. pp. 22-27..

Akbari, Abolghasem and Azizan, Abu Samah (2015) Slope Adjustment of Runoff Curve Number (CN) using Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Global Digital Elevation Model (GDEM) for Kuantan River Basin. In: Proc. SPIE 9644. Earth Resources and Environmental Remote Sensing/GIS Applications VI , 20-24 September 2015 , Toulouse, France. pp. 1-11., 9644. ISSN 0277786X

Akbari, Abolghasem and Fadzil, Mat Yahaya and Samah, Azizan Abu (2015) Optimization of ASTER Elevation Data to Improve Watershed Delineation. In: Proceeding of the International Conference on Space Science and Communication (IconSpace2015) , 10-12 August 2015 , Langkawi, Malaysia. pp. 444-448..

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali (2015) Ultrasound Enhanced Structural Modification of Oil Palm Empty Fruit Bunch (OPEFB) Fiber/Poly(Lactic) Acid Composites. In: National Conference for Postgraduate Research (NCON-PGR 2015) , 24-25 January 2015 , Universiti Malaysia Pahang (UMP). .

Akindoyo, John Olabode and Suriati, Ghazali and Beg, M. D. H. (2015) Structural and Thermal Properties of Ultrasound Treated Oil Palm Empty Fruit Bunch (OPEFB) Fiber. In: Proceedings of Tenth TheIIER International Conference , 12 February 2015 , Kuala Lumpur. pp. 60-64..

Al Adresi, Alaeldeen Saleh and Mohd Ridzuan, Darun (2015) Exploring Best SHRM Practices-Trust Relationship: An Empirical Approach. In: Advances In Global Business Research: Proceedings of the 12th Annual World Congress of the Academy for Global Business Advancement (AGBA) , 16-19 November 2015 , Faculty of Industrial Management University of Malaysia Pahang, Kuantan, Pahang. pp. 1084-1095., 12 (1). ISSN 1549-9332

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod and Noor Lina, Ramli (2015) A Review of the Fault Ride Through Requirements in Different Grid Codes Concerning Penetration of PV System to the Electric Power Network. In: International Conference on Electrical Control and Computer Engineering 2015 , 27-28 October 2015 , Kuantan, Pahang. pp. 1-6.. (Unpublished)

Alavi, Sayed Qasim and Norhayati, Rosli and Mohd Zuki, Salleh (2015) Numerical Solutions of the Stagnation-Point Flow and Heat Transfer Towards An Exponentially Stretching/Shrinking Sheet with Constant Heat Flux. In: AIP Conference Proceeding, 541, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 541..

Ali, A. J. Adham and Mohamed, Younis (2015) Planning to Design a Railway Network System: Using a Simulation Model. In: International Conference On Business Strategy And Social Sciences , 16-17 August 2015 , Kuala Lumpur. . (Unpublished)

Ali, Eman N. and Mohamad Syazwan, Abdul Halim (2015) Comparison of Bioethanol Yield Produced from Moringa Oleifera Seeds Husk Removed Manually and Mechanically. In: 4th International Scientific Conference on Apllied Science & Engineering , 3-4 October 2015 , Langkawi. pp. 1-6., 4. ISSN 2415-2072 (Online); 2518-2552 (Print)

Ali, Eman N. and Umarul, I. A. (2015) Possibility of Producing bioethanol from Moringa oleifera Press Cake. In: Proceedings of The Energy & Materials Research Conference (EMR2015): "Materials and Technologies for Energy Efficiency" , 25-27 February 2015 , Madrid, Spain. pp. 22-25..

Ali, Muna Jalal and Makky, Essam A. and M. M., Yusoff (2015) Impact of Antimicrobial Agents against Oral Isolates. In: Proceedings of International Conference on Agricultural, Ecological and Medical Sciences (AEMS-2015) , 10-11 February 2015 , Penang, Malaysia. pp. 19-22..

Ali, Mushtaq and Jasni, Mohamad Zain and Mohamad Fadli, Zolkipli and Gran, Badshah (2015) Battery Efficiency of Mobile Devices through Computational Offloading: A Review. In: IEEE Student Conference on Research and Development (SCOReD 2015) , 13-14 December 2015 , Kuala Lumpur, Malaysia. pp. 317-322.. ISBN 978-1-4673-9572-4

Alkasasbeh, Hamzeh Taha and Norhafizah, Md Sarif and Mohd Zuki, Salleh and Razman, Mat Tahar and Roslinda, Nazar and Pop, Loan (2015) Effect Of Radiation And Magnetohydrodynamic Free Convection Boundary Layer Flow On A Solid Sphere With Newtonian Heating In A Micropolar Fluid. In: AIP Conference Proceeding, 662, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 662..

Alsariera, Yazan A. and Mazlina, Abdul Majid and Kamal Z., Zamli (2015) An Interaction Strategy for Testing Software Product Lines using the Bat-inspired Algorithm. In: 4th International Conference on Software Engineering & Computer Systems (ICSECS 2015) , 19-21 August 2015 , Kuantan, Pahang. pp. 148-153.. ISBN 978-1-4673-6722-6

Alsibai, Mohammad Hayyan and Hoo, Min Sing (2015) A Smart Driver Monitoring System Using Android Application and Embedded System. In: International Conference on Control Systems, Computing and Engineering (ICCSCE 2015) , 27-29 November 2015 , Penang. pp. 1-6.. (Unpublished)

Amir, Azizi (2015) An Integrated Framework of Critical Techniques in Implementation of Total Quality Management. In: International Conference on Industrial Engineering and Operations Management (IEOM 2015) , 3-5 March 2015 , Dubai. pp. 1-7.. ISBN 978-1-4799-6064-4

Amir, Azizi (2015) Relationships between Total Quality Management Critical Techniques in Automotive Industry. In: International Conference on Industrial Engineering and Operations Management (IEOM 2015) , 3-5 March 2015 , Dubai. pp. 1-8..

Amir, Azizi and Daniel, Osezua Aikhuele (2015) An Integrated Model of Kano and Quality Function Deployment for Evaluation of Lean Production Tools in Assembly Environment. In: International Conference on Industrial Engineering and Operations Management (IEOM 2015) , 3-5 March 2015 , Dubai. pp. 1-6..

Ang, Chan Mun and Hagos, F. Y. and R., Mamat and A. N., Oumer and Azmi, W. H. (2015) Modelling Phase Change Material for Concentrating Energy Storage in Solar Thermal Cooking Stove. In: International Conference on Mechanical Engineering and Advanced Material 2015 , 3-4 December 2015 , Kota Kinabalu, Sabah. pp. 4-11., 1 (1).

Asar, Abdul Karim and Bouhedda, Ghalia and M. R., Abdul Hamid (2015) Women’s Public Office Positions in Islamic Jurisprudence: The Case of Malaysia. In: International Conference on Social Science , 27-28 July 2015 , Universiti Sains Malaysia. .

Asar, Abdul Karim and Nik Marniwati, Jusoh (2015) Pemerkasaan Tulisan Jawi di Malaysia: Realiti atau Mimpi? In: Konferensi Antarabangsa Islam Borneo VIII , 2-3 Sept 2015 , Sarawak. . (Unpublished)

Ashis Kumar, Mandal and M. N. M., Kahar (2015) Combination of Graph Heuristic with Hill Climbing Search for Solving Capacitated Examination Timetabling Problem. In: 4th International Conference on Software Engineering and Computer Systems (ICSECS 2015) , 19-21 August 2015 , Kuantan, Pahang. pp. 118-123..

Ashis Kumar, Mandal and M. N. M., Kahar (2015) Solving Examination Timetabling Problem using Partial Exam Assignment with Great Deluge Algorithm. In: 2015 International Conference on Computer, Communications, and Control Technology (I4CT) , 21-23 April 2015 , Kuching, Sarawak. pp. 535-539., 11 (8). ISSN 1097-8135 (Unpublished)

Ashis Kumar, Mandal and M. N. M., Kahar (2015) Solving Examination Timetabling Problem using Partial Exam Assignment with Hill Climbing Search. In: IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE 2015) , 12-14 April 2015 , Langkawi, Kedah. pp. 84-89..

Asrul, Adam and Norrima, Mokhtar and Marizan, Mubin and Zuwairie, Ibrahim and Mohd Ibrahim, Shapiai (2015) Dingle's Model-based EEG Peak Detection using a Rule-based Classifier. In: Proceedings of the 2015 International Conference on Artificial Life and Robotics (ICAROB 2015) , 10-12 January 2015 , Oita, Japan. pp. 1-4..

Atnaw, Samson M. and Kitaw, Daniel (2015) Investigation Of Industrial Energy Efficiency: A Case Study. In: International conference on Mechanical and Automotive Engineering (ICMA2015) , 27-28 October 2015 , Kuching, Malaysia. pp. 1-5..

Avazpour, Mahrokh and Abdulbari, Hayder A. (2015) Rheology Charactrization of Drag Reducing Agents. In: National Postgraduate Conference 2015 , 24-25 January 2015 , Universiti Malaysia Pahang. pp. 1-2.. (Unpublished)

Ayoubi, Tawfiqullah and Norhayati, Rosli and Arifah, Bahar and Madihah, Md Salleh (2015) Time Delay and Noise Explaining the Behaviour of the Cell Growth in Fermentation Process. In: AIP Conf. Proc. : The 2nd ISM International Statistical Conference 2014 (ISM-II) , 12–14 August 2014 , Pahang, Malaysia. pp. 547-554., 1643. ISBN 978-0-7354-1281-1

Aziman, Abdullah and Rahmah, Mokhtar and Amelia, Hasan (2015) Evaluation of Universiti Malaysia Pahang Online Resources Access with Mobile Technology Towards Strategic Knowledge Management. In: Prosiding NCOAL 2015 - Persidangan Kebangsaan Perpustakaan Akademik , 17-18 March 2015 , Kuantan, Pahang. pp. 56-64.. ISBN 978-967-0691-68-8

Aziz, Nur Sukinah and Adzhar, Kamaludin (2015) Development of website usability instrument based on experts review. In: 2015 2nd International Conference on Communication and Computer Engineering (ICOCOE) , 9-11 Jun 2018 , Sea Sun Sand Resort & Spa Phuket, Phuket, Thailand. pp. 1-10.. (Unpublished)

Azma, Abdullah and Rohani, Abu Bakar and Roslina, Abd Hamid and Muhammad Zulfahmi Toh, Abdullah (2015) Capturing Requirement Specification for Safety-critical System using SOFL and UML. In: Computational Science and Information Management (ICOCSIM 2015) , 19-21 August 2015 , Kuantan, Pahang. . (Unpublished)

Azmah Hanim, Mohamad Ariff and Ourdjini, Ali and Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman (2015) Thermal Cyclic Test For Sn-4Ag-0.5Cu Solders On High P Ni/Au AND Ni/Pd/Au Surface Finishes. In: International Conference On Mechanical Engineering Research (ICMER) 2015 , 18-19 August 2015 , Kuantan, Pahang. .

Azmir, Azhari and Schindler, Christian and Godard, Claudia and Gibmeier, Jens and Kerscher, Eberhard (2015) Effect of Multiple Jet Passes Treatment in Waterjet Peening on Fatigue Performance. In: 1st International Conference on Applied Surface Science (ICASS 2015) , 27-30 July 2015 , Shanghai, China. pp. 1-20.. (Unpublished)

B., Abdul Aziz (2015) Future Prospect for Engineering Technology. In: Academic Festival, Terengganu Advanced Technical Institute University College (TATIUC) , 13 May 2015 , Terengganu. pp. 1-34.. (Unpublished)

B., Ghobadian and G., Najafi and R., Mamat and M., Abbasian (2015) Combustion Parameters of Spark Ignition Engine using Waste Potato Bioethanol and Gasoline Blended Fuels. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9., 100 (012008).

B., Ghobadian and G., Najafi and R., Mamat and M. M., Noor and R., Yahyaee (2015) Performance and Emission Characteristics of a Diesel Engine Fueled with Fish-Oil Biodiesel. In: International Conference On Mechanical Engineering Research (ICMER) 2015 , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

Badaruddin, Muhammad and Zuwairie, Ibrahim and Kamarul Hawari, Ghazali and Kamil Zakwan, Mohd Azmi and Nor Azlina, Ab. Aziz and Nor Hidayati, Abd Aziz and Mohd Saberi, Mohamad (2015) A New Hybrid Simulated Kalman Filter and Particle Swarm Optimization for Continuous Numerical Optimization Problems. In: International Conference on Electrical Control and Computer Engineering 2015 , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Badhrulhisham, Abdul Aziz (2015) Opportunities and Challenges of Engineering Technology Education for Developing Countries. In: Proceedings of Engineering Technology International Conference (ETIC 2015) , 10-11 August 2015 , Bali, Indonesia. .

Badhrulhisham, Abdul Aziz and Daing Nasir, Ibrahim and Gharayeb, O. and Ibrahim, A. (2015) The Process and Challenges of International Academic Collaboration in STEM. In: NAFSA 2013 Annual Conference & Expo , 28-31 May 2013 , St Louis, USA. pp. 1-18., 8 (1). ISSN 1738 - 9984 (Unpublished)

Balsam, A. Mustafa (2015) Influence of Developing Professional Communication on the Success of Postgraduate Research Supervisory. In: Proceedings of the 14th International Conference on Education and Educational Technology (EDU '15) , 23-25 April 2015 , Kuala Lumpur, Malaysia. pp. 69-73.. ISBN 978-1-61804-300-9

C. T., Ann and A. R., Razali and N. A. I., Zainudin and Y. W., Leong (2015) Size Effects in Thin Sheet Metal Forming. In: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10.. (Unpublished)

C. W., Mohd Noor and R., Mamat and G., Najafi and W. B., Wan Nik and M., Fadhil (2015) Application of Artificial Neural Network for Prediction of Marine Diesel Engine Performance. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10., 100 (012023). ISSN 1757-8981 (Print); 1757-899X (Online)

Chan, Hwee Geem and M. S., Jadin and Amir Izzani, Mohamed (2015) Observation of Transient Luminous Events (TLEs) In Pekan. In: International Conference on Electrical, Control and Computer Engineering (INECCE 2015) , 27-28 October 2015 , Kuantan, Pahang. pp. 1-6.. (Unpublished)

Chi, Shein Hong and Chin, S. Y. and Chin, Fui Cheng and Mohd Sabri, Mahmud and Chua, Gek Kee (2015) Kinetic Study of Enzymatic Oxidation On Glycerol with Immobilised Laccase/TEMPO System. In: Asian Congress on Biotechnology 2015 (ACB2015) , 15-19 November 2015 , Kuala Lumpur. .

Chin, Siew Choo and Fadzil, Mat Yahaya and Doh, Shu Ing and Kusbiantoro, Andri and Wen, Khai Chong (2015) Experimental Study on Shear Strengthening of RC Deep Beams with Large Openings Using CFRP. In: Proceedings of International Conference on Architecture, Structure and Civil Engineering (ICASCE'15) , 7-8 September 2015 , Antalya, Turkey. pp. 89-95..

Cindy, Olin and Hassan, Ibrahim and Azri, Alias and Ahmmad Shukrie, Md Yudin and F., Basrawi (2015) A Study on a Higher Heating Value of Agricultural Waste in Malaysia. In: World Conference on Engineering & Applied Sciences , 30-31 May 2015 , Kuala Lumpur. . (Unpublished)

Daing Nasir, Ibrahim (2015) Teks Ucapan Naib Canselor UMP Di Majlis Perasmian Persidangan Kebangsaan Perpustakaan Akademik (NCOAL). In: Prosiding NCOAL 2015 - Persidangan Kebangsaan Perpustakaan Akademik , 17-18 March 2015 , Kuantan, Pahang. pp. 1-5.. ISBN 978-967-0691-68-8

Das, Debashish and Sadiq, Ali Safa and Noraziah, Ahmad (2015) GCMT-189 An Efficient Time Series Analysis for Pharmaceutical Sector Stock Prediction by Applying Hybridization of Data Mining and Neural Network Technique. In: Global Congress on Computing and Media Technologies (GCMT’15) , 25-27 November 2015 , Chennai, Tamil Nadu, India. pp. 1-8..

F. A., Fauzi and Z., Ghazalli and J. P., Siregar (2015) Effect of Various Fiber Content of Kenaf Fiber on Mechanical Properties of the Composites. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015 , 11-13 October 2015 , Johor Bahru, Johor, Malaysia. pp. 1-7.. (Unpublished)

Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Saffuan, Wan Ahmad and Mohd Warid, Hussin (2015) Sulphate Resistance of Aerated Concrete Containing Palm Oil Fuel Ash as Partial Sand Replacement. In: Proceedings of International Conference on Innovations in Civil and Structural Engineering (ICICSE 2015) , 3-4 June 2015 , Istanbul, Turkey. pp. 246-251..

Faiz, Mohd Turan (2015) Criteria Assessment in Design Evaluation for Product Development using Integrated Fuzzy-TOPSIS. In: 9th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (ECODESIGN 2015) , 2-4 December 2015 , Tokyo, Japan. pp. 1-7.. (Unpublished)

Farhan, M. Said and Shobana, Sinniah (2015) Antioxidant Activity of Monascus sp. Fermented With Morinda citrifolia. In: Asian Congress on Biotechnology 2015 (ACB2015) , 15-19 November 2015 , Kuala Lumpur. . (Unpublished)

Fatchurrohman, Nanang and Marini, C. D. and Suraya, Sulaiman and Iqbal, AKM Asif (2015) Investigation of Product Performance of Al-Metal Matrix Composites Brake Disc using Finite Element Analysis. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

Fatimah, Mahmud and Baba, Md Deros and Dzuraidah, Abdul Wahab and Norazidah, Shamsudin (2015) The Perception on the Importance and Practice of Top Management Commitment and Leadership in Palm Oil Industry Benchmarking Implementation. In: Book of Abstracts 12th Annual World Congress of the Academy for Global Business Advancement (AGBA) , 16-19 November 2015 , Kuantan, Malaysia. p. 170., 12 (1). ISSN 1549-9332

Fazilah, Abdul Aziz and Noraini, Mohd Razali and Nur Najmiyah, Jaafar (2015) Ergonomics Risk Awareness in Associated with Employee’s Learning and Experiences. In: International Symposium on Advancement In Ergonomic and Safety 2015(ERGOSYM2015) , 30 November - 1 Decemcer 2015 , UniMAP, Perlis.. . (Unpublished)

Fazilah, Abdul Aziz and Noraini, Mohd Razali and Nur Najmiyah, Jaafar (2015) An Investigation Into Low Ergonomic Risk Awareness Among Staffs at Early Product Development Phase in Malaysia Automotive Industries. In: Joint Conference of 2nd International Manufacturing Engineering Conference & 3rd Asia Pacific Conference Of Manufacturing Systems 2015 , 12-14 November 2015 , Swiss Garden Hotel, Kuala Lumpur. . (Unpublished)

Firas, D. Ahmed and Aws Naser, Jaber and Mazlina, Abdul Majid and Mohd Sharifuddin, Ahmad (2015) Agent-based Big Data Analytics in Retailing: A Case Study. In: International Conference on Software Engineering and Computer Systems (ICSECS) , 19-21 August 2015 , Kuantan, Pahang, Malaysia. pp. 67-72.. ISBN 978-1-4673-6722-6

Gaanty Pragas, Maniam and Mohd Hasbi, Ab. Rahim and M. M., Yusoff and Noor, Hindryawati and Shalizanis Mariyanti, Dora Siswanto (2015) Esterification of Palm Fatty Acid Distillate Using Organophosphonic Acid-Functionalised Rice Husk Silica. In: International Conference on Green Energy 2015 , 21-23 Sept 2015 , Florida, USA. . (Unpublished)

Gan, Leong Ming and Gan, Hui Leng and Law, Hoon Chit (2015) Analysis on the Grinding Quality of Palm Oil Fibers By Using A Combined Grinding Equipment. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012047).

Ghanbari, M. and Najafi, G. and Ghobadian, B. and R., Mamat and M. M., Noor and A., Moosavian (2015) Support Vector Machine to predict diesel engine performance and emission parameters fueled with nano-particles additive to diesel fuel. In: 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012069). ISSN 17578981

Ghulami, Hassan Rahnaward and Ab Hamid, Mohd Rashid and Roslinazairimah, Zakaria (2015) Comparative Analysis Of Positive And Negative Attitudes Toward Statistics. In: AIP Conference Proceeding, 212, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 212..

Ghulami, Hassan Rahnaward and Ab Hamid, Mohd Rashid and Roslinazairimah, Zakaria (2015) Students’ Attitudes Towards Learning Statistics. In: AIP Conference Proceeding, 1660, 050035 : International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28-30 May 2015 , Penang, Malaysia. pp. 1-7..

Hadi, Manap and Zul, Rasyied and M. S., Najib (2015) Optimization Methods for Optical Ammonia Sensor. In: International Conference on Sensors Engineering and Electronics Instrumental Advances (SEIA' 2015) , 21-22 Nov 2015 , Dubai. . (Unpublished)

Hafizoah, Kassim and Najah, Osman and Aziman, Abdullah (2015) A pilot evaluation of creative strategy learning model through public speaking performance. In: The International Conference on Education and Educational Psychology (ICEEPSY) 2014 , 22-25 October 2014 , Kyrenia, Cyprus. pp. 1-10.. ISSN 1877-0428 (print); 1877-0428 (online) (Unpublished)

Hamidah, Abdullah and Syarifah, Abd Rahim and Zahira, Yaakob and Khan, Maksudur R. and Nur Aminatulmimi, Ismail (2015) Characterization and Photocatalytic Activity of CeO2-TiO2 for Photoreduction of CO2 to Methanol under Visible Light. In: 28th Symposium Of Malaysian Chemical Engineers (SOMCHE) 2015 , 20-22 Oct 2015 , Putrajaya. . (Unpublished)

Hamzah, Ahmad and Nor Syahidah, Samsuri and Mohd Rusllim, Mohamed (2015) Kalman Filter Based Formaldehyde Odor Characteristics Estimation in Pathology Department, HTAA. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015 , 11-13 October 2015 , Johor Bahru, Johor, Malaysia. pp. 1-6.. (Unpublished)

Hamzah, Ahmad and Nur Aqilah, Othman (2015) HF-Fuzzy Logic based Mobile Robot Navigation; A Solution to Finite Escape Time. In: 3rd International Conference On Electrical, Control And Computer Engineering 2015 (INECCE 2015) , 27-28 October 2015 , Kuantan, Pahang. . (In Press / Online First)

Hamzah, Ahmad and Nur Aqilah, Othman (2015) A Solution to Finite Escape Time for H∞ Filter Based SLAM. In: 10th Asian Control Conference , 31 Mei - 3 Jun 2015 , Kota Kinabalu. pp. 1-6.. (Unpublished)

Hasan, Ahmad (2015) Ḥadd al-Kifāya (حد الکفاية): Cabaran Konseptualisasi Patuh Syariah dan Alternatif Panduan Garis Kemiskinan Negara. In: Prosiding NCOZ 2015 - Persidangan Zakat Dalam Pembangunan Ekonomi Peringkat Kebangsaan 2015 = National Conference On Zakat and Economic Development 2015 , 1 June 2015 , Kuantan, Pahang. pp. 1-20.. ISBN 978-967-0691-47-3

Hasan, Ahmad and Maimunah, Sukeri (2015) Islamic Economic Development Through Halal Businesses Among Malaysian Community. In: Prosiding NCOZ 2015 - Persidangan Zakat Dalam Pembangunan Ekonomi Peringkat Kebangsaan 2015 = National Conference On Zakat and Economic Development 2015 , 1 June 2015 , Kuantan, Pahang. pp. 149-163..

Hasmadi, Hassan (2015) Zakat Pada Kacamata Siswa-Siswi Universiti Malaysia Pahang dari Aspek Kepengetahuan. In: Prosiding NCOZ 2015 - Persidangan Zakat Dalam Pembangunan Ekonomi Peringkat Kebangsaan 2015 = National Conference On Zakat and Economic Development 2015 , 1 June 2015 , Kuantan, Pahang. pp. 197-210.. ISBN 978-967-0691-47-3

Hasmanizam, Abdul Majid and Mazlina, Abdul Majid and Mohd Izham, Ibrahim and Wan Nurul Safawati, Wan Manan and Muhammed Ramiza, Ramli (2015) Investigation of Security Awareness on e-Learning System Among Lecturers and Students in Higher Education Institution. In: International Conference on Computer, Communications, and Control Technology (I4CT 2015) , 21-23 April 2015 , Kuching, Sarawak, Malaysia. pp. 216-220..

Hasmawani, Hashim and Muhammad Khairul Anuar, Mohamed and Abid, Hussanan and Nazila, Ishak and Norhafizah, Md Sarif and Mohd Zuki, Salleh (2015) The Effects of Slip Conditions and Viscous Dissipation on the Stagnation Point Flow over a Stretching Sheet. In: The 2nd Innovation and Analytics Conference & Exhibition (IACE 2015) , 29 Sept - 1 Okt 2015 , Alor Setar, Kedah, Malaysia. pp. 1-9.. (Unpublished)

Hasneeza, L. Zakaria and Kamal Z., Zamli (2015) Migrating Birds Optimization based Strategies for Pairwise Testing. In: IEEE 9th Malaysian Software Engineering Conference (MySEC) , 16-17 December 2015 , Kuala Lumpur, Malaysia. pp. 19-24.. ISBN 978-1-4673-8227-4

Hasneeza, L. Zakaria and Kamal Z., Zamli (2015) T-way test data generation startegy with MBO algorithm. In: 8th SOFTEC Asia 2015 conference, (SOFTEC 2015) Postgraduate Workshop , 7 September 2015 , Kuala Lumpur, Malaysia. pp. 16-21..

Hazwan, Syafiq and A. R., Yusoff and A. M. N., Kamarizan and M. F., Ghazali (2015) Statistical Analysis of Deep Drilling Processs Conditions Using Vibrations and Force Signals. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

He, Yu Hai and Ahmad Ziad, Sulaiman (2015) Optimization Of Eurycomanone Yield Using Response Surface Methodology By Water Extraction. In: National Conference on Postgraduate Studies (NCON-PGR 2015) , 24-25 January 2015 , Kuantan, Pahang. pp. 1-20..

Hojabri, Mojgan (2015) Third-Order Passive Filter Improvement for Renewable Energy Systems to Meet IEEE 519-1992 Standard Limits. In: IEEE Conference on Energy Conversion (CENCON2015) , 19-20 Aug 2015 , Johor Bahru. . (Unpublished)

Hojabri, Mojgan and Hojabri, Mehrdad (2015) Design, Application and Comparison of Passive Filters for Three-Phase Grid-Connected Renewable Energy Systems. In: Joint International Conference On Electrical, Control and Computer Engineering 2015 (INECCE2015) , 27-28 October 2015 , Kuantan, Pahang. . (Unpublished)

Homaid, Ameen A. Ba and Alsewari, Abdulrahman A. (2015) A variable combinatorial test suite strategy based on modified greedy algorithm. In: IEEE 4th International Conference on Software Engineering and Computer Systems, ICSECS 2015: Virtuous Software Solutions for Big Data , 19 - 21 August 2015 , Swiss-Garden Beach Resort, Kuantan, Pahang. pp. 154-159. (7333101). ISBN 9781467367226

Hoong, Chan Chung and M. A., Ameedeen (2015) Intuitive Content Management System. In: IEEE International Conference on Computer, Communications, and Control Technology (I4CT2015) , 21-23 April 2015 , Kuching. pp. 541-543.. ISSN 2252-5459 ISBN 978-1-4799-7952-3

I. M., Yusri and R., Mamat and O. M., Ali and A., Aziz and M. K., Akasyah and M. K., Kamarulzaman and C. K., Ihsan and Mahmudul, H. M. and S. M., Rosdi (2015) Combustion and Emissions Characteristics of a Compression Ignition Engine Fueled with N-butanol Blends. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9., 100 (012048). ISSN 1757-899X

Intan Suhana, Mohd Razelan and Hussain, H. and Law, T. H. and Ahmad Farhan, Md. Shokeri (2015) Modeling Crucial Road Environment Risk Factor for Developing Asian Countries Using Principal Component Analysis. In: Conference of Asean Road Safety 2015 , 3-6 November 2015 , Kuala Lumpur. pp. 1-7.. (Unpublished)

Islam, Md. Shaharul and Karim, Md. Rezaul and Tan, Suat Hian and Rashid, Shah Samiur and Sarkar, Shaheen M. (2015) Antiamylolytic Activityof Okra (Abelmoschus esculentusL.) Pod Glycoprotein. In: International Conference Of Biotechnology In Health And Agriculture (ICBHA) , 9-10 January 2015 , Dhaka, Bangladesh. pp. 18-19.. ISSN 1802-2685

Ismail, Ibrahim and Zuwairie, Ibrahim and Hamzah, Ahmad and Zulkifli, Md. Yusof (2015) An Improved Multi-State Particle Swarm Optimization for Discrete Optimization Problems. In: 7th International Conference on Computational Intelligence, Communication Systems and Networks (CICSyN 2015) , 3–5 June 2015 , Riga, Latvia. pp. 3-8..

Ismail, Ibrahim and Zuwairie, Ibrahim and Hamzah, Ahmad and Zulkifli, Md. Yusof (2015) A Multi-State Gravitational Search Algorithm for Combinatorial Optimization Problems. In: Proceedings of the 7th International Conference on Computational Intelligence, Communication Systems and Networks (CICSyN 2015) , 3–5 June 2015 , Riga, Latvia. pp. 9-14..

Ismail, Ibrahim and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2015) Rule-Based Multi-State Gravitational Search Algorithm for Discrete Optimization Problem. In: 4th International Conference on Software Engineering and Computer Systems , 19-21 August 2015 , Kuantan, Pahang, Malaysia. pp. 142-147..

Ismed, Iskandar and Yudi Satria, Gondokaryono (2015) Competing Risk Models in Reliability Systems, a Weibull Distribution Model with Bayesian Analysis Approach. In: Joint Conference Imec-Apcoms 2015 Universiti Malaysia Pahang (Ump) and Institut Teknologi Bandung (ITB), Indonesia , 12-14 November 2015 , Kuala Lumpur. pp. 1-8.. (Unpublished)

Jaber, Ali Y. and L. A., Latiff and Norulhusna, Ahmad and Abdalla, Ahmed N. (2015) Joint Clipping and Amplifying Techniques for PAPR Reduction in OFDM Systems. In: 1st International Conference on Telematics and Future Generation Networks (TAFGEN) , 26-28 May 2015 , Kuala Lumpur. pp. 54-58.. ISBN 978-1-4799-7315-6

Jamal Rizal, Razali and Imaduddin, Abidin and Abdullah Adnan, Mohamed (2015) Pengkonsepsian zakat: Abstrak tetapi konkrit. In: Prosiding NCOZ 2015 - Persidangan Zakat Dalam Pembangunan Ekonomi Peringkat Kebangsaan 2015 = National Conference On Zakat and Economic Development 2015 , 1 June 2015 , Kuantan, Pahang. pp. 278-291.. ISBN 978-967-0691-47-3

Jamaludin, Sallim and Rozlina, Mohamed and Roslina, Abd Hamid (2015) A Modified ACO-based Search Algorithm for Detecting Protein Functional Module From Protein Interaction Network. In: International Conference on Computer, Communication and Information Sciences, and Engineering (ICCCISE 2015) , 26-27 Jan 2015 , Jeddah, Saudi Arabia. . (Unpublished)

Jamil, Roslan and Nor Natashah, Nasir and Nur Aminatulmimi, Ismail and Hafizah, Ramli (2015) Extraction of Essential Oil from Murraya Koenigii Leaves'. In: International Conference of Fluid & Chemical Engineering 2015 , 25-27 November 2015 , Adya Hotel, Langkawi. . (Unpublished)

K. H., Mah and Wan Mohd Hafizuddin, Wan Yussof and Mazrul Nizam, Abu Seman and A. W., Mohammad (2015) Separation Of Xylose From Glucose Using Thinfilm Composite Membrane: A Study On Separation Performance And Fouling Properties. In: International Conference on Environment 2015 (ICENV 2015) , 18-19 August 2015 , Eastin Hotel, Pulau Pinang. pp. 1-8..

Kamal Z., Zamli and Rozlina, Mohamed and Rohani, Abu Bakar and Alsewari, Abdulrahman A. (2015) Feature analysis of android-based holy Quran applications. In: 2013 Taibah University International Conference on Advances in Information Technology for the Holy Quran and Its Sciences , 22-25 December 2013 , Taibah University, Madinah, Saudi Arabia. pp. 194-198. (7277245). ISBN 978-1-4799-2823-1

Kamal Z., Zamli and Yazan A., Alsariera and Mazlina, Abdul Majid (2015) SPLBA: an interaction strategy for testing software product lines using the bat-inspired algorithm. In: 2015 4th International Conference on Software Engineering and Computer Systems (ICSECS) , 19-21 August 2015 , Kuantan, Malaysia. pp. 148-153.. ISBN 978-146736722-6

Kamariah, Gono (2015) Ucapan Pengerusi, Persidangan Kebangsaan Perpustakaan Akademik 2015. In: Prosiding NCOAL 2015 - Persidangan Kebangsaan Perpustakaan Akademik , 17-18 March 2015 , Kuantan, Pahang. p. 9.. ISBN 978-967-0691-68-8

Kamil Zakwan, Mohd Azmi and Pebrianti, Dwi and Zuwairie, Ibrahim and Shahdan, Sudin and Sophan Wahyudi, Nawawi (2015) Simultaneous Computation of Model Order and Parameter Estimation for System Identification Based on Gravitational Search Algorithm. In: 6th International Conference on Intelligent Systems, Modelling and Simulation , 9-12 February 2015 , Kuala Lumpur, Malaysia. pp. 135-140..

Khairul Anuar, Shahid and Norhaiza, Ghazali and Khairunisa, Muthusamy (2015) A Bayesian Approach for Structural Health Monitoring of Concrete Bridge. In: Proceedings of International Conference on Architecture, Structure and Civil Engineering (ICASCE'15) , 7-8 September 2015 , Antalya, Turkey. pp. 25-30..

Khairul Anuar, Shahid and Sharifah Maszura, Syed Mohsin and Norhaiza, Ghazali (2015) The Potential of Cooling Effect Using Palm Oil Clinker as Drainage Layer in Green Roof System. In: Proceedings of Engineering Technology International Conference (ETIC 2015) , 10-11 August 2015 , Bali, Indonesia. pp. 1-8..

Khairunisa, Muthusamy and Nur Azzimah, Zamri and Norhaiza, Ghazali and Sharifah Maszura, Syed Mohsin (2015) Compressive Strength and Density of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash under Different Curing Regime. In: Proceedings of 2015 International Conference on Innovations in Civil and Structural Engineering (ICICSE'15) , 3-4 June 2015 , Istanbul, Turkey. pp. 242-247..

Khalid, Adam and Fakhreldin, Mohammed Adam Ibrahim and Jasni, Mohamad Zain and Mazlina, Abdul Majid and Noraziah, Ahmad (2015) Big Data: Issues, Challenges, Technologies and Methods. In: International Conference on Data Engineering (DAENG2015) , 25-26 April 2015 , Bali, Indonesia. .

Khalid Adam, Ismail Hammad and Fakhreldin, Mohammed Adam Ibrahim and Jasni, Mohamad Zain and Mazlina, Abdul Majid (2015) Big Data Analysis and Storage. In: Proceedings of the 2015 International Conference on Operations Excellence and Service Engineering , 10-11 September 2015 , Orlando, Florida, USA. pp. 648-659..

Khamisah, Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri and G., Najafi (2015) Viscosity Of AL2O3 Nanofluid in Different Base Mixture Ratio. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

Khoo, Chun Keong and Mahfuzah, Mustafa and Ahmad Johari, Mohamad and M. H., Sulaiman (2015) Real Time Flood Prediction for Sungai Isap Residence Using Support Vector Machine. In: Technology & Applications for Disaster Management International Conference 2015 - Conference Proceeding Book , 27-28 October 2015 , Kuala Lumpur. pp. 26-29.. ISBN 978-983-41773-5-5

Khor, Hui Liang and Liew, Siau-Chuin and Jasni, Mohamad Zain (2015) Algorithm Design of Digital Watermarking Scheme for Multi-frames Medical Images. In: The 2nd International Conference on Computational Science and Information Management (ICoCSIM 2015) , 19-21 August 2016 , Kuantan, Pahang. pp. 1-5.. (Unpublished)

Khor, Hui Liang and Liew, Siau-Chuin and Jasni, Mohamad Zain (2015) A Review on Parallel Medical Image Processing on GPU. In: IEEE 4th International Conference on Software Engineering and Computer Systems , 19-21 August 2015 , Kuantan, Pahang, Malaysia. pp. 45-48.. ISBN 978-1-4673-6722-6

Kong, Zi Ying and Cheng, C. K. and Khan, Maksudur R. (2015) Application of CuFe2O4 For Photocatalytic Fenton Treatment of Glycerol Solution. In: 5th International Conference on Environment (ICENV 2015) , 18-19 August 2015 , Penang, Malaysia. pp. 1-10.. (Unpublished)

L. H., Shah and N. F., Zainal Ariffin and M., Ishak and A. R., Razali (2015) Mechanical and Microstructural Characterization of AA6061- AA7075 Dissimilar Friction Stir Welding. In: 6th International Conference on Manufacturing Science and Technology , 1-2 Jun 2015 , Bandar Seri Begawan, Brunei. pp. 1-6.. (Unpublished)

Law, Woon Phui and Jolius, Gimbun (2015) Retrofits of a Partial Combustion Lance using a Computational Fluid Dynamics. In: 8th Malaysian University Campus Emission Tool (MUCET) 2014 , 10-11 November 2014 , Melaka. pp. 320-326., 1. ISBN 978-967-0257-53-2

Lee, Lay-Khoon and Liew, Siau-Chuin (2015) Breast Ultrasound Automated ROI Segmentation with Region Growing. In: IEEE 4th International Conference on Software Engineering and Computer Systems , 19-21 August 2015 , Kuantan, Pahang, Malaysia. pp. 177-182.. ISBN 978-1-4673-6722-6

Lee, Lay-Khoon and Liew, Siau-Chuin (2015) A Survey of Medical Image Processing Tools. In: IEEE 4th International Conference on Software Engineering and Computer Systems , 19-21 August 2015 , Kuantan, Pahang, Malaysia. pp. 171-176.. ISBN 978-1-4673-6722-6

Lim, Tien Sze and Wen, Guey Cheaw and Zahari, Awang Ahmad and Choo, Ai Ling and Koo, Voon Chet and Habibah, Lateh and Bayuaji, Luhur (2015) High Resolution DEM Generation Using Small Drone for Interferometry SAR. In: Proceedings of the 2015 International Conference on Space Science and Communication (IconSpace 2015) , 10-12 Aug 2015 , Langkawi, Kedah. pp. 366-369..

Liu, Yao and Kee, Shin Woan and Mohd Hanafiah, Ahmad (2015) The Relationship between Leadership Styles and Employee Engagement: Evidences from Construction Companies in Malaysia. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015 , 11-13 October 2015 , Johor Bahru, Johor, Malaysia. pp. 1-9.. (In Press / Online First)

Lok, Leh Leong and Abbas Saliimi, Lokman (2015) A Critical Review of General Method and Game-based Method in Learning Time Dilation. In: International Conference On Computational Science and Information Management (ICOCSIM-2015) , 19-21 August 2015 , Kuantan, Pahang. . (Unpublished)

M., Ghanbari and G., Najafi and B., Ghobadian and R., Mamat and M. M., Noor (2015) Performance and Emission Characteristics of a Ci Engine Fueled With Nanodiesel. In: International Conference On Mechanical Engineering Research (ICMER) 2015 , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

M., Ghanbari and G., Najafi and B., Ghobadian and R., Mamat and M. M., Noor and A., Moosavian (2015) Adaptive Neuro-Fuzzy Inference System (Anfis) to Predict Ci Engine Parameters Fueled with Nano-Particles Additive to Diesel Fuel. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012070). ISSN 1757-8981 (Print); 1757-899X (Online)

M., Hazim and L., Chee Wai and G., Devandran and M., Khalid and M., Hanis (2015) Design and Development of Five Parallel Engines for Lubricantsand Fuel Testing Experimental Rigs, Part 3. In: 2 nd Integrated Design Project Conference (IDPC) 2015 , 11 Dec 2015 , Universiti Malaysia Pahang (UMP). pp. 1-18..

M., Ishak and A. S. K., Razali and N. F. M., Noordin and L. H. A., Shah and F. R. M., Romlay (2015) The Effect of Filler on Weld Metal Structure of AA6061 Aluminum Alloy by Tungsten Inert Gas (TIG). In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. , 11 (1). ISSN 22298649

M., Ishak and M. A. H. M., Jasri and M., Afendi and A., Ismail (2015) The Hardness Effect of Friction Stir Welding by MILKO 37 Milling Machine. In: AIP Conference Proceeding 1660, 070096 : International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28–30 May 2014 , Penang, Malaysia. pp. 1-6..

M., Ishak and M. A. H. M., Jasri and M., Afendi and A., Ismail (2015) The Microstructure of Aluminum A5083 Butt Joint by Friction Stir Welding. In: AIP Conference Proceeding 1660 : International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. pp. 1-9..

M., Ishak and M. N. M., Salleh and F. R. M., Romlay (2015) A Study on Bead on Plate Welding of AA7075 By Low Power Fiber Laser. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

M., Jusop and M. F. F., Ab Rashid (2015) A Review on Simple Assembly Line Balancing Type-e problem. In: IOP Conference Series: Materials Science and Engineering : 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9., 100 (1). ISBN 1757-899X

M., Muziana and Kamal Z., Zamli (2015) Development of Simulated Annealing Based Scheduling Algorithm for Two Machines Flow Shop Problem. In: Proceeding Book MUCET 2014, Volume: 1 Engineering & Technology , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 1-5..

M. H., Lim and W. K., Ngui (2015) Diagnosis of Twisted Blade in Rotor System. In: The 22nd International Congress on Sound and Vibration , 12-16 July 2015 , Italy. pp. 1-7.. (Unpublished)

M. H., Sulaiman and Zuriani, Mustaffa and Nor Rul Hasma, Abdullah (2015) An Application of Cuckoo Search Algorithm for Solving Combined Economic and Emission Dispatch Problem. In: 4th International Conference on Informatics, Electronics and Vision (ICIEV2015) , 15-18 Jun 2015 , Fukuoka, Japan. pp. 1-5.. ISBN 978-1-4673-6902-2

M. I. N., Isa and Ahmad Salihin, Samsudin (2015) Characterization of Plasticized CMC-NH4BR Based Biopolymer Electrolyte and Electrochemical Studies on the Solid-State Batteries. In: 5th International Conference on Functional Materials and Devices (ICFMD 2015) , 4-6 Aug 2015 , Johor Bahru. . (Unpublished)

M. M., Yusoff and Saiful Nizam, Tajuddin (2015) Gas Chromatographic Analysis of Complex Sesquiterpenes in Malaysian Agarwood Essential Oil. In: International Congress on Natural Sciences and Engineering (ICNSE 2015) , 7-9 May 2015 , Kyoto, Japan. . (Unpublished)

M. Nafis, O. Z. and Case, Keith and Watts, D. M. (2015) Cutting Orientations for Non-Complex Parts in 4th Axis Machining. In: International Manufacturing Engineering Conference 2015 . pp. 1-7.. (Unpublished)

M. R., Abdul Hamid and Noor Azura, Omar and Zainol, Mustafa (2015) Investigating the Encouraging Factors for Scholarly Works Contributiontowards Institutional Repository: A Case Study at a Malaysian University. In: World Academy of Science, Engineering and Technology , 26-27 January 2015 , Jeddah, Saudi Arabia. p. 126.. (In Press / Online First)

M. R. M., Rejab and S. H. S. M., Fadzullah and K. A., Kamarudin and F., Mat (2015) Numerical Modelling of Triangular Corrugated-core Sandwich Panel subjected to Impact Loading. In: Proceeding Book MUCET 2014: Engineering & Technology , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 374-378., 1.

M. S., Jadin and Intan Zalika, Mohd Nasiri and Ruhaizad, Ishak (2015) A Sizing Tool for PV Standalone System. In: International Conference on Electrical, Control and Computer Engineering (INECCE 2015) , 27-28 October 2015 , Kuantan, Pahang. pp. 1-6.. (Unpublished)

M. S., Jadin and Nur Asyikin, Setapa and Amir Izzani, Mohamed (2015) Development of Hybrid Thermoelectric and Photovoltaic Power Generation. In: International Conference on Electrical, Control and Computer Engineering (INECCE 2015) , 27-28 October 2015 , Kuantan, Pahang. pp. 1-6.. (Unpublished)

M. S. A., Rahim and I., Ismail (2015) Review of Magnetorheological Fluids and Nanofluids Thermal Behaviour. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10., 100 (012040). ISSN 1757-899X

M. S. Hendriyawan, Achmad and Mohd Razali, Daud and Pebrianti, Dwi and Saifudin, Razali (2015) Laser-Inertial Aided 30 Scanner Using Geometric Invariant for Terrain Construction. In: 2nd International Conference on Mechanics and Mechatronics Research (ICMMR2015) , 11-12 June 2015 , Kuala Lumpur, Malaysia. pp. 957-963., 799.

M. Zabri, Abu Bakar and Rosdiyana, Samad and Pebrianti, Dwi and Mahfuzah, Mustafa and Nor Rul Hasma, Abdullah (2015) Computer Vision-Based Hand Deviation Exercise for Rehabilitation. In: International Conference on Control Systems, Computing and Engineering , 27-29 November 2015 , Penang. pp. 1-6.. (Unpublished)

M.S., Hendriyawan Achmad and Nur Afzan, Murtdza and Nor Anis Aneza, Lokman and Mohd Razali, Daud and Saifudin, Razali and Pebrianti, Dwi (2015) Exploration of Unknown Environment with Ackerman Mobile Robot Using Robot Operating System (ROS). In: International Conference on Electrical, Control and Computer Engineering 2015 , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

MM. Zabri, Abu Bakar and Rosdiyana, Samad and Pebrianti, Dwi and Mahfuzah, Mustafa and Nor Rul Hasma, Abdullah (2015) Finger Application Using K-Curvature Methods and Kinect Sensor in Real-time. In: International Symposium on Technology Management and Emerging Technologies , 25-27 August 2014 , Langkawi, Kedah. . (Unpublished)

Mahadi, Bahari and Abdullah, Bawadi and Alenazey, Feraih and Vo, Dai-Viet N. (2015) Ethanol Dry Reforming for H2-Rich Syngas Production Over Ce-Ni/Al2O3 Catalyst. In: 5th International Conference on Environment 2015 , 18-19 August 2015 , Penang, Malaysia. . (Unpublished)

Mahadi, Bahari and Nguyen, Huu Huy Phuc and Nurul Aini, Razali and Vo, Dai-Viet N. (2015) Evaluation of La-promoted Ni/Al2O3 Catalyst for Ethanol Dry Reforming. In: The 15th Korea - Japan Symposium on Catalysis , 26-28 May 2015 , Busan, Republic of Korea. . (Unpublished)

Mahadi, Bahari and Vo, Dai-Viet N. and Nguyen, Huu Huy Phuc and Nurul Aini, Razali (2015) Catalytic Performance of La-Ni/Al2O3 Catalyst for CO2 Reforming of Ethanol. In: The International Chemical Congress of Pacific Basin Societies (PACIFICHEM 2015) , 15-20 December 2015 , Hawaii, US. pp. 1-6.. (Unpublished)

Mahaletchumi, Morgan and Nor Rul Hasma, Abdullah and M. H., Sulaiman and Mahfuzah, Mustafa and Rosdiyana, Samad (2015) Benchmark Studies on Multi-Objective Evolutionary Programming (MOEP) using Mutation Based on Adaptive Mutation Operator (AMO) and Polynomial Mutation Operator (PMO). In: International Conference on Advanced Mechanics, Power and Energy 2015 (AMPE2015) , 5 December 2015 , Hotel Holiday Inn Kuala Lumpur, Glenmarie, Shah Alam, Malaysia. . (Unpublished)

Mahaletchumi, Morgan and Nor Rul Hasma, Abdullah and M. H., Sulaiman and Mahfuzah, Mustafa and Rosdiyana, Samad (2015) Computational Intelligence Technique For Static Var Compensation (SVC) Installation Considering Multi-Contingencies (N-m). In: International Conference on Electrical, Control and Computer Engineering (INECCE 2015 , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Mahfuzah, Mustafa and Nur Syuhaida Hani, Abdul Hamid and Nor Rul Hasma, Abdullah and Rosdiyana, Samad and Pebrianti, Dwi (2015) Brain Dominance Using Brainwave Signal. In: IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2015)) , 27-29 November 2015 , Batu Ferringhi, Penang. pp. 1-5..

Mahfuzah, Mustafa and Rul Azreen, Mustafar and Rosdiyana, Samad and Nor Rul Hasma, Abdullah and Norizam, Sulaiman (2015) Observation of the Effects of Playing Games with the Human Brain Waves. In: Medical Engineering Conference 2015 , 22-23 August 2015 , Johor Bahru. . (In Press / Online First)

Mahfuzah, Mustafa and Sia, KeeHuong and Norizam, Sulaiman and Rosdiyana, Samad and Nor Rul Hasma, Abdullah and Nasrul Salim, Pakheri and Mohd Nasir, Taib (2015) Initial Result of Body Earthing on Student Stress Performance. In: International Conference on BioSignal Analysis, Processing and Systems (ICBAPS) , 26-28 Mei 2015 , Kuala Lumpur. . (Unpublished)

Mahyuddin, Ismail (2015) Keperluan Transformasi Dalam Perundangan Syariah Bagi Menangani Kes Mal Dan Jenayah Melibatkan Ilmu Sihir. In: The International Conference on Development of Education, Environment, Tourism, Economics, Politics, Arts and Heritage , 23-26 November 2015 , Kuala Terengganu. pp. 1-10..

Mahyuddin, Ismail and Zulfakar, Ramlee and Jahid, Sidek (2015) Menzahirkan Sisi Ghaib Perbuatan Jenayah (فعل جنائي) Dan Niat Jenayah (قصد جنائي) Dalam Kesalahan Membunuh Menggunakan Sihir: Satu Analisa Dengan Merujuk Seksyen 152 Perintah Kanun Hukuman Jenayah Syariah Brunei Darussalam. In: Konferensi Antarabangsa Islam Borneo (KAIB VIII) , 3-4 September 2015 , Brunei. pp. 1-7..

Makeen, Mohd Amin and M. F., Ghazali (2015) Leakage Detection in Galvanized Iron Pipelines using Ensemble Empirical Mode Decomposition Analysis. In: AIP Conference Proceedings: International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28-30 May 2014 , Penang, Malaysia. pp. 1-5., 1660 (070003). ISBN 978-0-7354-1304-7

Makeen, Mohd Amin and M. F., Ghazali and N. F., Adnan (2015) Leak Detection in Medium Density Polyethylene (MDPE) Pipe Using Pressure Transient Method. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-6., 100 (012007). ISSN 1757-899X

Makky, Essam A. and Ali, Muna Jalal and M. M., Yusoff (2015) Toothpaste Novelty and Reality. In: 9th International Conference On Energy And Development, Environment And Biomedicine (EDEB 2015) , 5-7 Sept 2015 , Seoul, South Korea. . (Unpublished)

Makky, Essam A. and Chan, Cai Wen and Ali, Muna Jalal and M. M., Yusoff (2015) Termite Control Biotechnology. In: Global Conference On Engineering And Applied Science (GCEAS 2015) , 6-8 July 2015 , Hong Kong. , 1. (Unpublished)

Malakhov, Eugene and Mezhuyev, Vitaliy (2015) Ontology-based Development of the Metamodels for Modelling Distributed Parallel Software Systems. In: 3rd IEEE International Conference on Artificial Intelligence, Modelling and Simulation , 2-4 December 2015 , Kota Kinabalu, Sabah. pp. 1-4.. (Unpublished)

Mansor, Sulaiman (2015) Pemilik Kenderaan dan Penganggur/ Tiada Pekerjaan Dalam Pengiraan Had Al-Kifayah: Suatu Penilaian. In: Prosiding NCOZ 2015 - Persidangan Zakat Dalam Pembangunan Ekonomi Peringkat Kebangsaan 2015 = National Conference On Zakat and Economic Development 2015 , 1 June 2015 , Kuantan, Pahang. pp. 306-322..

Marlina, Yakno and Junita, Mohd Saleh and Bakhtiar, Affendi Rosdi (2015) New Technique for Larger ROI Extraction of Hand Vein Images. In: International Conference on BioSignal Analysis, Processing and Systems (ICBAPS) , 26-28 Mei 2015 , Kuala Lumpur. pp. 82-87.. ISBN 978-1-4799-6879-4

Mas Ayu, Hassan and S., Izman and Mohammed Rafiq, Abdul Kadir and R., Daud and Salwani, Mohd Salleh and Mohd Faiz, Mohd Yusoff and Mahmood, Anwar and G., Krishnamurithy and T., Tamarul (2015) The Effects of Oxide Layer on Co-Cr-Mo: Preliminary Study In-vitro. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015) , 19-22 Sept 2015 , Johor Bahru. . (Unpublished)

Mas Ayu, Hassan and Sudin, Izman and Mohammed Rafiq, Abdul Kadir and R., Daud and Mohd Faiz, Mohd Yusoff and Mahmood, Anwar and A., Shah (2015) Creating Oxide Interlayer Through Thermal Oxidation Improves Adhesion Strength Of Hydroxyapatite Coating on Co-Cr-Mo Substrates. In: 1st International Conference on Materials and Manufacturing Engineering and Technology , 28-31 July 2015 , Seoul, Korea. . (Unpublished)

Maysoon, A. Mohammed and Mazlina, Abdul Majid and Balsam, A. Mustafa and Rana, Fareed Ghani (2015) Queueing Theory Study of Round Robin Versus Priority Dynamic Quantum Time Round Robin Scheduling Algorithms. In: 4th International Conference on Software Engineering and Computer Systems , 19-21 August 2015 , Kuantan, Pahang, Malaysia. pp. 189-194.. ISBN 978-1-4673-6722-6

Maz Jamilah, Masnan and Nor Idayu, Mahat and Ali Yeon, Md Shakaff and Abu Hassan, Abdullah and Nur Zawatil, Ishqi Zakaria and Nurlisa, Yusuf and Norazian, Subari and Ammar, Zakaria and Abdul Hallis, Abdul Aziz (2015) Understanding Mahalanobis Distance Criterion for Feature Selection. In: AIP Conf. Proc., 1660, 050075 : International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28-30 May 2014 , Penang. pp. 1-6..

Mazin Mustafa, Mahdi and Abu Zaharin, Ahmad and Ekhlas, Mhawi (2015) High-Penetration, without Storage, PV Solar-Diesel Generator In Isolated System. In: 4th International Conference on Global Optimization and Its Applications (ICoGOIA2015) , 10-11 August 2015 , Universiti Malaysia Pahang (UMP). pp. 1-7.. (Unpublished)

Mazlina, Abdul Majid and Kamal Z., Zamli and Fakhreldin, Mohammed Adam Ibrahim (2015) Modelling A Complex Human Centre Queuing System for Enhancing The Capability of Agent Based Simulation. In: International Conference on Data Engineering (DAENG2015) , 25-26 April 2015 , Bali, Indonesia. .

Mazma Syahidatul Ayuni, Mazlan and Norhayati, Rosli (2015) A Gompertzian Model With Random Effects To Cervical Cancer Growth. In: AIP Conference Proceedings: International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28-30 May 2014 , Penang, Malaysia. pp. 1-7., 1660 (050008). ISSN 0094-243X ISBN 978-0-7354-1304-7

Mezhuyev, Vitaliy and Mazlina, Abdul Majid and Ravi, Samikannu (2015) Estimating the Efficiency of Information Technology for Domain-Specific Mathematical Modelling. In: 2nd International Conference on Computer, Communication and Control Technology (I4CT2015) , 21-23 April 2015 , Kuching, Sarawak. pp. 289-293..

Mohamad Al Amin, Razali and Farhan, M. Said (2015) Preliminary Study on Solid State Fermentation of Monascus Purpureus for Pigment Production in 2.3 L Stirred Drum Bioreactor. In: 5th International Conference on Advancement in Science and Technology (ICAST 2015) , 10-12 Aug 2015 , Cherating, Kuantan. . (Unpublished)

Mohamad Eliyass, Jamaruppin and Bayuaji, Luhur and Pebrianti, Dwi (2015) Land Cover Classification Using Landsat Data (Study Area: Pekan District, Pahang State, Malaysia). In: 4th International Conference on Software Engineering and Computer Systems (ICSECS'15) , 19-21 August 2015 , Kuantan, Pahang. pp. 1-5.. (Unpublished)

Mohamad Hilmi, Mat Said and Saharudin, Ramli and Norsuhaila, Musa (2015) Zakat Pendapatan: Satu Tinjauan Awal Sejauhmana Komitmen Staf Universiti Malaysia Pahang. In: Prosiding NCOZ 2015 - Persidangan Zakat Dalam Pembangunan Ekonomi Peringkat Kebangsaan 2015 = National Conference On Zakat and Economic Development 2015 , 1 June 2015 , Kuantan, Pahang. pp. 353-360.. ISBN 978-967-0691-47-3

Mohamad Husaini, Badrul Zamin and Norazidah, Shamsudin and Puteri Fadzline, Muhamad Tamyez and Mohd Ghazali, Maarof (2015) Perceive Influence of Third-Party Logistics (3PL) Customer Satisfction Indicators and the Company’s Financial Performance. In: Programme & Abstract Book of International Conference on Global Optimization and Its Applications (ICoGOIA) 2015 , 10-11 August 2015 , Universiti Malaysia Pahang (UMP). p. 25. (1).

Mohamed, Mohamed Ackiel and Manurung, Yupiter HP and L. H., Shah and Nurul Hidayah, Othman (2015) Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding. In: 68th IW International Conference High-Strength Materials , 2-3 July 2015 , Helsinki, Finland. pp. 1-8..

Mohammad Amirul, Mohd Yusof and Mazrul Nizam, Abu Seman (2015) Polymide Forward Osmosis Membrane: Synthesis, Characterization, and its Performances for Humic Acid Removal. In: 5th International Conference on Environment 2015 , 18-19 August 2015 , Penang, Malaysia. pp. 1-10.. (Unpublished)

Mohammed, Mohammed Adam Taheir and Wan Maseri, Wan Mohd and Ruzaini, Abdullah Arshah and Mungad, M. and Sutoyo, Edi and Chiroma, Haruna (2015) An Alternative Algorithm for Soft Set Parameter Selection using Special Order. In: The 2nd International Conference on Advanced Data and Information Engineering (DaEng-2015) , 25-26 April 2015 , Bali, Indonesia. pp. 1-12.. (Unpublished)

Mohammed, Mohammed Adam Taheir and Wan Maseri, Wan Mohd and Ruzaini, Abdullah Arshah and Mungad, M. and Sutoyo, Edi and Chiroma, Haruna (2015) Hybrid Filter for Attributes Reduction in Soft Set. In: The 2nd International Conference on Advanced Data and Information Engineering (DaEng-2015) , 25-26 April 2015 , Bali, Indonesia. pp. 1-13.. (Unpublished)

Mohammed, Mohammed Adam Taheir and Wan Maseri, Wan Mohd and Ruzaini, Abdullah Arshah and Mungad, M. and Sutoyo, Edi and Chiroma, Haruna (2015) Hybrid Framework Parameterization Reduction Combination in Soft Set. In: The 2nd International Conference on Advanced Data and Information Engineering (DaEng-2015) , 25-26 April 2015 , Bali, Indonesia. pp. 1-12.. (Unpublished)

Mohammed Hasan, Ali and Mohamad Fadli, Zolkipli and Aws Naser, Jaber (2015) Performance Comparison of Transmission Control Protocol and User Datagram Protocol over Wireless Networks. In: International Conference On Computational Science and Information Management (ICOCSIM-2015) , 19-21 August 2015 , Kuantan, Pahang. . (Unpublished)

Mohd Anwar, Zawawi and O'Keeffe, S. and Lewis, Elfed and O'Sullivan, K. (2015) Extrinsic optical fibre bending sensor for spine monitoring. In: IEEE Sensors 2015 , 1-4 November 2015 , Busan, South Korea. pp. 1-4. (7370422). ISSN 9781479982028

Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail and Mohd Falfazli, Mat Jusof and Mohd Helmi, Suid and Ahmad Nor Kasruddin, Nasir (2015) A Model-Free PID Tuning to Slosh Control Using Simultaneous Perturbation Stochastic Approximation. In: International Conference on Control Systems, Computing and Engineering , 27-29 November 2015 , Penang. pp. 1-4.. (Unpublished)

Mohd Farid, Zainudin and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup (2015) Thermodynamic Cycle Evaluation of Rhombic Drive Beta-configuration Stirling Engine. In: Energy Procedia, Vol. 68, 2nd International Conference on Sustainable Energy Engineering and Application (ICSEEA 2014) , 14-15 Oktober 2014 , Bandung, Indonesia. pp. 419-428., 68. ISSN 1876-6102

Mohd Hafizi, Mohammad Yusoff and N. M. M., Ammar and Idris, Mat Sahat (2015) Study on the Behavior of Particles in High Reynolds Number in Semi Ellipse Lid Driven Cavity. In: Proceedings of the International MultiConference of Engineers and Computer Scientists (IMECS) 2014 Vol II , 12-14 March 2014 , Hong Kong. .

Mohd Hanafiah, Ahmad and Mohd Rashid, Ab Hamid and Noor Azlinna, Azizan (2015) Partial Least Squares Path Modelling of the Impact of National Cultures on Organisational Justice of Malaysian Assessment Centre. In: Seminar Kebangsaan Institut Statistik Malaysia ke-9 (SKISM-IX) , 31 Mac 2015 , Universiti Kebangsaan Malaysia, Bandar Baru Bangi. .

Mohd Helmi, Suid and Mohd Falfazli, Mat Jusof and Nor Ashidi, Mat Isa (2015) Sliding Statistics Switching Median Filter for the Removalof Low Level Mix Impulse Noise. In: International Congress on Natural Sciences and Engineering , 7-9 May 2015 , Kyoto, Japan. pp. 1-9.. (Unpublished)

Mohd Helmi, Suid and Mohd Falfazli, Mat Jusof and Zulkifli, Musa and Nor Ashidi, Mat Isa (2015) A New Approach of Hybrid Switching Median Filter for Very Low Level Impulse Noise Reduction in Digital Images. In: International Congress on Natural Sciences and Engineering (ICNSE 2015) , 7-9 May 2015 , Kyoto, Japan. pp. 1-10..

Mohd Najib, Razali and M. Luqman Hakim, M. Effendi and Musfafikri, Musa and R. M., Yunus (2015) Formulation of Bitumen from Industrial Waste. In: 17th International Conference on Chemical Engineering (ICCE 2015) , 27-28 October 2015 , Yogyakarta, Indonesia. . (Unpublished)

Mohd Najib, Razali and Mohammad Hafizuddin, Hambali and R. M., Yunus (2015) Recovery of Base Oil from Waste Sludge Using Ultrasonic Solvent Extraction Method. In: The 5th International Renewable Energy and Environment Conference (IREEC-2016) , 11-13 July 2015 , Madrid, Spain. pp. 1-7.. (Unpublished)

Mohd Rashid, Ab Hamid and Mohd Rusllim, Mohamed and Zainol, Mustafa (2015) Assessment Method Of Study Program: Results From Regression Analysis. In: AIP Conference Proceeding, 531, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 531..

Mohd Rashid, Ab Hamid and Mokhtar, Abdullah and Zainol, Mustafa and Nur Balqishanis, Zainal Abidin and Hanafiah, Ahmad (2015) Conceptual Framework of Innovation Excellence Model for Higher Education Institutions. In: Procedia Social and Behavioral Sciences, Vol. 174, International Conference on New Horizons in Education (INTE 2014) , Paris, France , 25-27 June 2014. pp. 2846-2848., 174. ISSN 1877-0428 (print); 1877-0428 (online)

Mohd Rusllim, Mohamed (2015) Control of Dc Motor External Resistor Starter by Using Armature Current Decay Sensing Technique. In: 3rd International Conference On Electrical, Control And Computer Engineering 2015 (INECCE 2015) , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Mohd Sabri, Mahmud and Parthiban, Sandaray and Said, N. and Zahira, Yaakob (2015) Flooding Possibility in Two-Immiscible-Liquid System of Enzymatic Biodiesel Synthesis. In: Proceeding Book MUCET 2014, Volume: 1 Engineering & Technology , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 370-373..

Mohd Syahidan, Kamarudin and Mohd Zaidi, Sidek (2015) Line Balancing Analysis of a Multi-Products Processing with a Single Type of Supply. In: Proceedings of International Conference on Knowledge Transfer (ICKT'15) , 1-3 December 2015 , Putrajaya Marriott Hotel, Malaysia. pp. 25-30.. ISBN 978-967-394-255-8

Mudaber, Mohammad Hassan and Yuhani, Yusof and Mohd Sham, Mohamad and Wen, Li Lim (2015) Persistency And Permanency of Two Stages DNA Splicing Languages with Respect to One Initial String and Two Rules Via Yusof-Goode (Y-G) Approach. In: AIP Conference Proceeding, 689, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 689..

Muhamad Arifpin, Mansor and A. R., Ismail and M. R. M., Yasin and A., Halim (2015) Implementation of Single Minutes of Exchange Die (SMED) in Malaysia Metal Stamping Industry: A Case Study. In: The 4th International Congress on Natural Sciences and Engineering , 7-9 May 2015 , Kyoto, Japan. . (Unpublished)

Muhamad Arifpin, Mansor and A. R., Ismail and Mohamad R., M. Yasin and A., Halim (2015) A Framework for Measuring The Effect of Changeover Time To Overall Equipment Effectiveness. In: The 4th International Congress on Natural Sciences and Engineering , 7-9 May 2015 , Kyoto, Japan. pp. 1-9.. (Unpublished)

Muhammad Azrin, Ahmad and Nor Haniza, Sarmin and Fong, Wan Heng and Yuhani, Yusof (2015) Second Order Limit Language Associated with Two Rules. In: Proceeding Book : Science and Mathematics for Sustainable Society, 2nd International Science Postgraduate Conference (ISPC 2014) , 10-12 March 2014 , Universiti Teknologi Malaysia. pp. 670-676.. ISSN 978-967-0194-39-4

Muhammad Azrin, Ahmad and Nor Haniza, Sarmin and Yuhani, Yusof and Wan, Heng Fong (2015) Some Restrictions on the Existence of Second Order Limit Language. In: AIP Conference Proceedings: The 22nd National Symposium on Mathematical Sciences (SKSM22) , 24-26 November 2014 , Selangor. pp. 1-7., 1682 (1). ISBN 978-0-7354-1329-0

Muhammad Khairul Anuar, Mohamed and Norhafizah, Md Sarif and Abdul Rahman, Mohd Kasim and Nor Aida Zuraimi, Md Noar and Mohd Zuki, Salleh and Anuar, Ishak (2015) Effects of Viscous Dissipation on Free Convection Boundary Layer Flow towards a Horizontal Circular Cylinder. In: The Engineering Technology International Conference (ETIC 2015) , 10-11 August 2015 , Bali, Indonesia. . (Unpublished)

Muhammad Shahrin, Sabri and M. M. A., Rahman and F. T., Suhaimi and A. S., Ngah and A., Aseli and Muhammad Fazrul Qazwan, Mohd Zaki (2015) Design and Development of Test Rig for Conversion of Pure Bio Oil Onto Biodiesel for Internal Combustion Engine Using Acidic (Esterification) Method and Alkaline (Trans-Esterification) Method. In: 2nd Integrated Design Project Conference (IDPC) 2015 , 11 Dec 2015 , Universiti Malaysia Pahang (UMP). pp. 1-14..

Muhammad Wasif, Nabeel and Abdullah, Embong and Mushtaq, Ali (2015) Computation offloading for smart internet devices. In: 4th International Conference on Software Engineering and Computer Systems, ICSECS 2015 , 19- 21 August 2015 , Swiss-Garden Beach Resort, Kuantan, Pahang. pp. 223-228. (7333115). ISBN 9781467367226

Muhammad Wasif, Nabeel Qureshi and Abdullah, Embong (2015) Computation Offloading – an Effective Approach to Enhance Smartphone Capabilities. In: National Conference for Postgraduate Research (NCON-PGR 2015) , 24-25 January 2015 , Universiti Malaysia Pahang (UMP). pp. 1-2..

Munira, Abdul Razak and Muhammad Nubli, Abdul Wahab and Ahmad Fazullah, Ahmad Zainal Abidin and Noradilah, Md Nordin and Wan Marzuki, Wan Ismail and Mohd Iszuani, Mohd Hassan and Imaduddin, Abidin and Anita, Abdul Rani and Mansor, Mohd Noor and Ummi Munirah Syuhada, Mohamad Zan and Ahmad Zul Hakimi, Hassim (2015) Political competitiveness and voters behavior : An exploratory study on socioeconomic issues. In: International Conference on Social Science Research, ICSSR 2015 , 8 & 9 June 2015 , Kuala Lumpur. pp. 859-867..

Munira, Abdul Razak and Muhammad Nubli, Abdul Wahab and Noradilah, Md Nordin (2015) Political Competitiveness and Voters Behaviour: An Exploratory Study. In: 3rd International Conference On Social Sciences Research (ICSSR 2015) , 8 & 9 June 2015 , Kuala Lumpur. . (Unpublished)

Munirah Ezzah, Tuan Zakaria and Saidatul Shima, Jamari and Norlirabiatuladawiyah, Che Ani and Suriati, Ghazali and Tanveer, Ahmad Khan (2015) Production of Carbonaceous Kenaf Fiber via Hydrothermal Carbonization Process. In: The International Conference on Fluids and Chemical Engineering (FLUIDSCHE 2015) , 25-27 November 2015 , Langkawi, Kedah. pp. 1-5.. (Unpublished)

Muzamir, Hasan and Suki, Suzillco (2015) Undrained Shear Strength of Soft Clay Reinforced with Single Encapsulated Bottom Ash Columns. In: Proceedings of The 4th International Congress on Engineering and Information (ICEAI 2015) , 7-9 May 2015 , Kyoto, Japan. pp. 391-400., 1. ISBN 978-967-0257-53-2

N., Ismail and M. F. M., Yusof and C. K. E., Nizwan and S., Abdullah (2015) On the Need of the Wavelet Analysis for Fatigue Condition Monitoring. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

N., Mohd Yamin and Noor Lina, Ramli and Suliana, Ab Ghani and N., Md. Saad and S. A., Md. Sharif (2015) Implementation of Passive Infrared Sensor in Street Lighting Automation System. In: International Conference on Electrical Control and Computer Engineering 2015 , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

N. A., Mohd Yusoff and Noor Lina, Ramli and Mohd Rusllim, Mohamed (2015) Investigation of the Potential Harnessing Tidal Energy in Malaysia. In: International Conference on Electrical Control and Computer Engineering 2015 , 27-28 October 2015 , Kuantan, Pahang. pp. 1-7.. (Unpublished)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid and G., Najafi (2015) Effect of Aluminium Oxide Nanoparticles Suspended in Different Eg-Base Ratio to Enhanced Thermal Conductivity. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid and G., Najafi (2015) Experimental Studies on Convective Heat Transfer Performance Using Ethylene Glycol Based Nanofluid. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

N. F., Adnan and M. F., Ghazali and Makeen, Mohd Amin and A. M. A., Hamat (2015) Leak Detection In Gas Pipeline by Acoustic and Signal Processing – A Review. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9.. (Unpublished)

N. M. S., Abd Malek and S. R., Mohamed and S. A., Che Ghani and W. S., Wan Harun (2015) Critical Evaluation on Structural Stiffness of Porous Cellular Structure of Cobalt Chromium Alloy. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10., 100 (1).

N. Nor, Azaini and N., Masngut (2015) Biobutanol Production in a Mixed Culture System of Clostridium Acteobutylicum ATCC 824 and Bacillus Subtilis DSM 4451. In: The International Conference on Fluids and Chemical Engineering (FLUIDSCHE 2015) , 25-27 Nov 2015 , Langkawi, Kedah. . (Unpublished)

N. S. M., Nawi and B. M., Deros and M. N., A. Rahman and Ezrin Hani, Sukadarin and N., Nordin and S. B. M., Tamrin and S. A., Bakar and M. L., Norzan (2015) Conceptual Design of Semi-Automatic Wheelbarrow to Overcome Ergonomics Problems Among Palm Oil Plantation Workers. In: IOP Conference Series: Materials Science and Engineering: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-7., 100. ISSN 1757-899X

Nadiatul Adilah, Ahmad Abdul Ghani and Bambang, Winarta and Azhani, Zukri and Mohamad Idris, Ali (2015) Flood Mitigation Study at Kg. Binjai and Kg. Kechau Tui, Lipis, Pahang. In: The 3rd International Conference on Water Resources (ICWR 2015) , 24-25 Nov 2015 , Langkawi, Kedah. . (Unpublished)

Naif, Yasir Hashim and Alsibai, Mohammad Hayyan and Abdul Manap, Sulastri (2015) Optimization of Channel Length Nano-Scale Sinwt Based Sram Cell. In: MATEC Web of Conferences: International Conference On Advanced Science, Engineering And Technology (ICASET) , 21-22 December 2015 , Penang, Malaysia. pp. 1-5. (01009).

Naif, Yasir Hashim and Hadi, Manap (2015) Diameter Optimization of Nano-scale SiNWT Based SRAM Cell. In: 2015 IEEE International Conference on Control System, Computing and Engineering , 27 - 29 November 2015 , Penang, Malaysia. pp. 87-90..

Najah, Osman (2015) Utilization Of Strategic Thinking Skills in Sustaining And Maintaining Strategies In Language Learning Process. In: e-Proceedings of the 1st Global Conference on Technology in Language Learning 2015 (GLIT2015) , 8-9 June 2015 , Melia Kuala Lumpur, Malaysia. pp. 112-119..

Najihah, Mohamed and Ahmad, Abd Majid and Abd Rahni, Mt Piah and Zainul, Ahmad Rajion (2015) Designing of skull defect implants using C1 rational cubic Bezier and offset curves. In: International Conference on Mathematics, Engineering and Industrial Applications, ICoMEIA 2014 , 28-30 May 2014 , Penang; Malaysia. pp. 1-6., 1660 (050003). ISSN 0094243X ISBN 978-073541304-7

Nasly, Mohamed Ali and Sharifah Maszura, Syed Mohsin and Mazlan, Abu Seman and Zainorizuan, Mohd Jaini (2015) Numerical Prediction of Cantilevered Reinforced Concrete Wall Subjected to Blast Load. In: Proceedings of the 9th Asia Pacific Structural Engineering and Construction Conference (APSEC 2015) & 8th Asean Civil Engineering Conference (ACEC 2015) , 3-5 November 2015 , Universiti Teknologi Malaysia Kuala Lumpur (UTMKL). pp. 72-78.. ISBN 978-983-44826-8-8

Nazila, Ishak and Hasmawani, Hashim and Muhammad Khairul Anuar, Mohamed and Norhafizah, Md Sarif and Mohd, Khaled and Norhayati, Rosli and Mohd Zuki, Salleh (2015) MHD Flow And Heat Transfer for the Upper-Convected Maxwell Fluid Over a Stretching/ Shrinking Sheet with Prescribed Heat Flux. In: AIP Conf. Proc. : The 2nd Innovation and Analytics Conference & Exhibition (IACE 2015) , 29 September - 1 October 2015 , Kedah. pp. 1-8., 1691 (040011). ISBN 9780735413382

Ng Liang, Shing and Corbin, Champion (2015) The One Universal Graph – a Free and Open Graph Database. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

Ng Liang, Shing and J. S., Sak and R., Dhinesh (2015) Low Cost Night Vision System for Intruder Detection. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

Ng Liang, Shing and K. O., Tan and T. H., Clement and T. H. , Lai and S. K., Ng (2015) Open Source Hardware and Software Platform for Robotics and Artificial Intelligence. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

Ngien, S. K. and J. E., Tan and Akbari, Abolghasem and S. W., Ahmad (2015) Physical Modelling of Floating Debris Boom. In: 3rd International Conference on Water Resources , 24-25 Nov 2015 , Langkawi, Kedah. . (Unpublished)

Ngien, S. K. and Norasman, Othman and Nadiatul Adilah, Ahmad Abdul Ghani (2015) Investigation of Sewage Flows in Universiti Malaysia PAHANG’s Sewerage System. In: Proceeding Book MUCET 2014, Volume: 1 Engineering & Technology , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 154-157..

Ngien, S. K. and Tan, Lit Ken (2015) Numerical Model For Napl Migration In Double-Porosity Subsurface Systems. In: E-proceedings of the 36th IAHR World Congress , 28 June – 3 July 2015 , Netherlands . pp. 1-5..

Noor Adilah, Md Salehan and Ahmad Ziad, Sulaiman and Azilah, Ajit (2015) Effect of Ultrasound on the Extraction of Gallic Acid from Labisia pumila (Kacip Fatimah) for the food applications. In: New Zealand Institute of Food Science & Technology Conference ( NZIFST) , 2 July 2015 , Palmerston North, New Zealand. .

Noor Adilah, Md Salehan and Ahmad Ziad, Sulaiman (2015) Effect of Ultrasound on the Extraction of Gallic Acid from Labisia Pumila (Kacip Fatimah). In: National Conference for Postgraduate Research (NCON-PGR 2015) , 24-25 January 2015 , Universiti Malaysia Pahang (UMP). pp. 544-546..

Noor Lina, Ramli and M. S., Abdul Wahab and S. A., Md. Sharif and N. H., Ramly (2015) Implementation of Microbial Fuel Cell in Harvesting Energy Using Wastewater. In: 2015 Progress in Applied Mathematics in Science and Engineering (PIAMSE) , 28Sept - 1Oct 2015 , Bali, Indonesia. . (Unpublished)

Noor Nabilah, Sarbini and Saffuan, Wan Ahmad and Khairunisa, Muthusamy and I. S., Ibrahim and A. A., Saim (2015) The Influence of Fibre Aspect Ratio on the Fracture Toughness of SFRC. In: International Conference on Advances in Civil and Environmental Engineering 2015 , 28-30 July 2015 , Penang. pp. 1-13.. (Unpublished)

Noor Raha, Mohd Radzuan and Abdullah Adnan, Mohamed and Nor Ashikin, Abdul Aziz (2015) Teachers’ Skills Preference in Teaching Oral Presentations to Technical Students. In: International Conference on Language Learning & Teaching (ICOLLT 2015) , 1-3 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Noor Raha, Mohd Radzuan and Zarina, Mohd Ali and Abdullah Adnan, Mohamed and Nurkarimah, Yusof and Mohd Asyraf, Othman (2015) The Role of Mobile Instant Messaging (Mim) Application in Enhancing Technical Students’ Frequency of Communication, Social Connectedness and Group Attitude: A Proposed Framework. In: The 1st International Conference on Educational Studies , 3-4 April 2015 , Pulai, Johor. . (Unpublished)

Noor Sarbani, Wan Muhammad and Nur Syamimi, Zulkefli and Zarith Sufia, Azlan and Sorooshian, Shahryar (2015) JIT and Small Companies. In: Advances In Global Business Research: Proceedings of the 12th Annual World Congress of the Academy for Global Business Advancement (AGBA) , 16-19 November 2015 , Faculty of Industrial Management University of Malaysia Pahang, Kuantan, Pahang. pp. 1051-1055., 12 (1). ISSN 1549-9332

Noor Zirwatul Ainee, Naharuddin and Nurul Hazlina, Noordin (2015) Multiband UWB Trapezoidal Antenna Using U and Pi-Shaped Slots. In: International Workshop on Electromagnetics: Applications and Student Innovation Competition (iWEM 2015) , 16-18 November 2015 , Hsin-Chu, Taiwan. pp. 1-2..

Noor Zirwatul Ainee, Naharuddin and Nurul Hazlina, Noordin (2015) UWB Trapezoidal Antenna with a Band-Notch Characteristic. In: International Workshop on Electromagnetics: Applications and Student Innovation Competition (iWEM 2015) , 16-18 November 2015 , Hsin-Chu, Taiwan. pp. 1-2..

Noorul Farina, Arifin and Ratna Wilis Haryati, Mustapa (2015) Promosi UMP-IR: Pengalaman Perpustakaan Universiti Malaysia Pahang. In: Prosiding NCOAL 2015 - Persidangan Kebangsaan Perpustakaan Akademik , 17-18 March 2015 , Kuantan, Pahang. pp. 177-189.. ISBN 978-967-0691-68-8

Nor Aida Zuraimi, Md Noar and Greenhow, Martin (2015) Wave Impact on a Deck or Baffle. In: AIP Conference Proceeding, 670, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. pp. 670-676..

Nor Aida Zuraimi, Md Noar and Greenhow, Martin (2015) Wave Impact on a Vertical Baffle. In: The Engineering Technology International Conference (ETIC 2015) , 10-11 August 2015 , Bali, Indonesia. . (Unpublished)

Nor Anis Aneza, Lokman and Norsyahirah Izzati, Zaidi and Mohd Razali, Daud and Khor, Ai Chia and Hendriyawan, Achmad (2015) Fire Recognition Using RGB and YCBCR Color Space. In: International Conference on Electrical, Control and Computer Engineering 2015 , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Nor Farhana, Hamid and Farhan, Mohd Said (2015) Screening of Significant Factors for Red Pigment Production by Monascus Purpureus FTC 5356 under Solid State Fermentation using Factorial Design. In: 5th International Conference on Advancement in Science and Technology (ICAST 2015) , 10-12 Aug 2015 , Cherating, Kuantan. . (Unpublished)

Nor Mahirah, Mustapha and Sorooshian, Shahryar and Noor Azlinna, Azizan (2015) A performance measurement systems: how are they different for Malaysian SME. In: International Conference on Operations Excellence and Service Engineering , 10-11 September 2015 , Orlando, Florida, USA. . (Submitted)

Nor Rul Hasma, Abdullah and M. F. S., Nasarudin and M., Mustafa and Pebrianti, Dwi and Rosdiyana, Samad (2015) Boundary Segmentation and Detection of Diabetic Retinopathy (DR) in Fundus Image. In: Medical Engineering Conference 2015 , 22-23 August 2015 , Johor Bahru. pp. 1-4.. (In Press / Online First)

Nor Rul Hasma, Abdullah and Norazizah, Ghazali and Norshafiqah, Ibrahim and Nadiatul Fatini, Solleh and Rosdiyana, Samad and Mahfuzah, Mustafa and Pebrianti, Dwi (2015) Solving Economic Dispatch (ED) Problem Using Artificial Immune System, Evolutionary Programming and Particle Swarm Optimization. In: International Conference on Electrical, Control and Computer Engineering (INECCE 2015) , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Noraihan Afiqah, Rawi and Nor Athirah, Mohd Zin and Abdul Rahman, Mohd Kasim and Sharidan, Shafie (2015) g-Jitter Induced MHD Mixed Convection Flow of Nanofluids Past a Vertical Stretching Sheet. In: AIP Conf. Proc. : Proceedings of 23rd Malaysian National Symposium of Mathematical Sciences (SKSM23) , 24–26 November 2015 , Johor Bahru, Malaysia. pp. 1-7., 1750. ISBN 978-0-7354-1407-5

Noralisa, Ismail and Norazlina, Rahmat and Norzaidah, Ngali and Norazidah, Shamsudin (2015) Hi-Viz Florescent SOTRA. In: Abstract Book of National Invention, Innovation, Design and Research 2015 , 29 October 2015 , Amansari Residence Resort, Johor, Malaysia. p. 22.. ISBN 978-983-42771-6-1

Noraniza, Samat and Rahmah, Mokhtar and Muhammad Iman, Mohd Salleh and Ngahzaifa, Ab. Ghani and Bayuaji, Luhur and Siti Normaziah, Ihsan (2015) The Effectiveness of Interactive Augmented Reality for Preschool Science Education. In: International Conference Of Computer Sciences & Information Management (ICOCSIM 2015) , 19-21 August 2015 , Kuantan, Pahang. pp. 1-4.. (Unpublished)

Noraziah, Ahmad and Herawan, Tutut and Ng, Liang Shen and Zailani, Abdullah and Balsam, A. Mustafa (2015) Fault Tolerance Impact on Near Field Communication for Data Storage of Mobile Commerce Technology in Cloud Computing. In: International Conference on Data Engineering(DAENG2015) , 25-26 Apr 2015 , Bali, Indonesia. . (Unpublished)

Noraziah, Ahmad and Wan Maseri, Wan Mohd and Ainul Azila, Che Fauzi (2015) Managing MyGRANTS Fragmented Database Using Binary Vote Assignment Grid Quorum with Association Rule (BVAGQ-AR) Replication Model. In: International Conference on Data Engineering(DAENG2015) , 25-26 Apr 2015 , Bali, Indonesia. . (Unpublished)

Norazidah, Shamsudin and Fatimah, Mahmud and Safiynaz, Omar (2015) Islamic Bank’s Financial Performance Indicators. In: Book of Abstracts 12th Annual World Congress of the Academy for Global Business Advancement (AGBA) , 16-19 November 2015 , Kuantan, Malaysia. p. 162., 12 (1). ISSN 1549-9332

Norhayati, Rosli and Arifah, Bahar and S. H., Yeak and Rahimah, Jusoh (2015) 2–stage Stochastic Runge–Kutta for Stochastic Delay Differential Equations. In: AIP Conf. Proc. : International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28-30 May 2015 , Penang, Malaysia. pp. 1-9., 1660 (050006). ISBN 978-0-7354-1304-7

Norhayati, Rosli and Mazma Syahidatul Ayuni, Mazlan and Arifah, Bahar (2015) Gompertzian Stochastic Model with Delay Effect to Cervical Cancer Growth. In: AIP Conference Proceeding: The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. pp. 570-576., 1643 (1). ISBN 978-0-7354-1281-1

Norhidayah, M. S. and Ahmad Rasdan, Ismail and Muhamad Arifpin, Mansor (2015) Perception Study On Ergonomics Practices In Malaysian Quarry And Mining Industry. In: 3rd Scientific Conference on Occupational Safety and Health (Sci-Cosh 2014) , 14-17 October 2014 , Johor Bahru, Johor, Malaysia. pp. 197-202., 12 (1).

Norlirabiatuladawiyah, Che Ani and Saidatul Shima, Jamari and Khan, Tanveer Ahmed (2015) Investigation of the Elemental Analysis of Carbonaceous Kenaf Fiber from HTC Process. In: National Conference on Postgraduate Studies (NCON-PGR 2015) , 24-25 January 2015 , Kuantan, Pahang. pp. 1-5..

Nour, A. H. and Azhari, H. Nour and Said, N. (2015) The Potentials of Water-in-Diesel Emulsions as a Future Fuel. In: International Conference on Alternative Energy in Developing Countries and Emerging Economies (2015 AEDCEE) , 28 & 29 May 2015 , Bangkok, Thailand. . (Unpublished)

Nur Aimi Syairah, Mohd Abdul Alim and Ahmad Ziad, Sulaiman and Azilah, Ajit (2015) Effect of Ultrasound on the Extraction of Ficus Deltoidea Leaves. In: FLUIDSCHE 2015 , 25-27 November 2015 , Langkawi, Kedah. p. 1.. (Unpublished)

Nur Fadzillah, Harun and Zainah, Md. Zain (2015) A Backstepping Based Pid Controller for Stabilizing an Underactuated X4-AUV. In: International Conferences on Electrical, Control and Computer Engineering (INECCE2015) , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Nur Fadzillah, Harun and Zainah, Md. Zain (2015) Integral Backstepping Control for Stabilizing an Underactuated X4-AUV. In: International Conference on Innovation in Science and Technology (IICIST 2015) , 20 Apr 2015 , Kuala Lumpur. . (Unpublished)

Nur Sakinah, Abd Aziz and Adzhar, Kamaludin (2015) Development Of Instrument For Evaluating Website Usability Focusing On University Website. In: Proceedings of the 5th International Conference on Computing and Informatics (ICOCI 2015) , 11-13 August 2015 , Istanbul, Turkey. pp. 114-120..

Nur Sukinah, Aziz and Adzhar, Kamaludin (2015) Using pre-test to validate the Questionnaire for Website Usability (QWU). In: 4th International Conference on Software Engineering and Computer Systems (ICSECS), 2015 , 19-21 August 2015 , Kuantan, Pahang. pp. 107-111.. ISBN 978-1-4673-6722-6

Nur Syahidah, Yusoff and Shamshuritawati , Sharif (2015) Understanding the Shift of Correlation Matrices During Financial Crisis: A Network Topology. In: AIP Conference Proceeding, 335, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. .

Nurhafizah, Abu Talip and Hayashi, Tatsuya and Tanighuchi, Jun and Hiwasa, Shin (2015) Lifetime Prolongation of Release Agent on Antireflection Structure Molds by Means of Partial-filling Ultraviolet Nanoimprint Lithography. In: Proceedings of the International Conference on Electronic Packaging and iMAPS All Asia Conference (ICEP-IACC 2015) , 14-17 April 2015 , Kyoto, Japan. pp. 418-421..

Nurhafizah, Abu Talip and Hayashi, Tatsuya and Taniguchi, Jun and Hiwasa, Shin (2015) Lifetime Prolongation of Release Agent on Antireflection Structure Molds by Means of Partialfilling Ultraviolet Nanoimprint Lithography. In: ICEP-IAAC 2015 Proceedings : International Conference on Electronics Packaging and iMAPS All Asia Conference , 14-17 April 2015 , Kyoto, Japan. pp. 418-421..

Nurlaila, Ismail and M., Ibrahim and Seema, Zareen and Saiful Nizam, Tajuddin and Mohd Hezri Fazalul, Rahiman and Mohd Nasir, Taib (2015) Analysis of Aroma Profile of Agarwood Incense Smoke by SPME and GCFID Combined with GC-MS. In: Internatiaonal Conference on Engineering Technologies and Entrepreneurship (ICETE 2015) , 16-18 November 2015 , Universiti Kuala Lumpur (UniKL). . (Unpublished)

Nurlaila, Ismail and Mohd Hezri Fazalul, Rahiman and Mohd Nasir, Taib and Mastura, Ibrahim and Seema, Zareen and Saiful Nizam, Tajuddin (2015) Identification of Significant Compounds of Agarwood Incense Smoke Different Qualities using Z-Score. In: IEEE 11th International Colloquium on Signal Processing & its Applications (CSPA2015) , 6-8 March 2015 , Kuala Lumpur. pp. 203-207., 1 (2).

Nurrina, Rosli and Kenji, Amagai (2015) Thickness Measurement of Liquid Sheet Spay Before Breakup. In: The 10th International Symposium On Advanced Science And Technology In Experimental Mechanics , 1-4 Nov 2015 , Matsue. . (Unpublished)

Nurshafiqa, Sharif and Rahmah, Mokhtar and Siti Normaziah, Ihsan and Azlina, Zainuddin and Nor Azan, Mat Zin (2015) Capturing Data of Children’ Concentration and Meditation Levels : How Learners’ Effort Influence the Academic Emotional Response Level. In: International Conference of Computational Science and Information Management (ICOCSIM 2015) , 19-21 August 2015 , Kuantan, Pahang. . (Unpublished)

Nurul Aida, Amir Khatif and Mohamad Aliff Kamil, Awang Kecik and Mohd Ali Hanafiah, Shaharudin and A. K., Prasada Rao and Noor Mazni, Ismail (2015) The Effect of Heat Treatment on The Hardness and Impact Properties of Medium Carbon Steel. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

Nurul Amirah, Ismail and Zainah, Md. Zain and Pebrianti, Dwi and Bayuaji, Luhur (2015) Attitude Control of Quadrotor. In: Malaysian Technical Universities Conference On Engineering And Technology (MUCET 2015) , 11-13 October 2015 , Johor Bahru. . (Unpublished)

Nurul Asyikin, Zainal and Zuriani, Mustaffa (2015) A Literature Review on Gold Price Predictive Techniques. In: 4th International Conference On Software Engineering & Computer Systems (ICSECS15) , 19-21 August 2015 , Kuantan, Pahang. . (Unpublished)

Nurul Atikah, Mohd Rodzri and Zulsyazwan, Ahmad Khushairi and Wan Mohd Hafizuddin, Wan Yussof and N., Zainol and Rozaimi, Abu Samah (2015) Main Factor Contribution in Factorial Screening for Ferulic Acid Production from Fibre-Pressed Oil Palm Frond (FPOPF) Using Mixed Culture. In: Asian Congress on Biotechnology 2015 (ACB2015) , 15-19 November 2015 , Kuala Lumpur. , 11. ISSN 1985-9325(Print); 2180-1606 (Online)

Nurul Fadzilah, Hasan and M. R. M., Rejab and Nurul Hidayah, Sapar (2015) Implementation of Speech Recognition Home Control System Using Arduino. In: International Conference on Electrical, Control and Computer Engineering 2015 , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Nurul Fatihah, Mahamad Roli and Wan Mohd Hafizuddin, Wan Yussof and Syed Mohd Saufi, Tuan Chik and Mazrul Nizam, Abu Seman and Abdul W., Mohammad (2015) Synthesis of Nanofiltration Membrane Developed from Different Concentration of Triethanolamine (TEOA) for Separation of Xylose from Glucose. In: International Conference on Environment 2015 (ICENV 2015) , 18-19 August 2015 , Eastin Hotel, Pulau Pinang. pp. 1-10.. (Unpublished)

Nurul Hidayah, Othman and L. H., Shah and M., Ishak (2015) Mechanical and Microstructural Characterization of Single and Double Pass Aluminum AA6061 Friction Stir Weld Joints. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012016). ISSN 1757-8981 (Print), 1757-899X (Online)

Nurul Nazihah, Hawari and Razman, Mat Tahar (2015) Microworlds of the Dynamic Balanced Scorecard for University (DBSC-UNI). In: AIP Conf. Proc. : The 2nd Innovation and Analytics Conference & Exhibition (IACE 2015) , 29 September - 1 October 2015 , Kedah. , 1691 (030009). ISBN 9780735413382

Nurul Shafiqa, Ahmad Zabidi and Sadiq, Ali Safa (2015) Transmission Power Adaption Technique for VANET by Using Piggyback Information. In: 2nd International Conference On Computational Science and Information Management (ICOCSIM-2015) , 19-21 August 2015 , Kuantan, Pahang. pp. 18-23.. (Unpublished)

Nurul Suraya, Azahari and N. M. M., Ammar and Ummu Kulthum, Jamaludin (2015) The Effect of Substantive Parameters On The Efficiency Of Archimedes Screw Microhydro Power: A Review. In: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9.. (Unpublished)

Nurul Wahidah, Mohd Zin and Mazlina, Abdul Majid and Fakhreldin, Mohammed Adam Ibrahim (2015) Improving Web Color using Color Scheme Assessment Tool (COSAT). In: 2nd International Conference on Industrial Technology and Applications , 2-3 October 2015 , Kuching, Sarawak. pp. 1-7.. (Unpublished)

Nurul ‘Azyyati, Sabri and M. M., Yusoff and Saiful Nizam, Tajuddin and Maizatul Farhain, Ismail (2015) Alternative to conventional method of nitrite elimination of bird nest (Swiftlet). In: Creation, Innovation Technology & Research Exposition 2015 (CITREX ’15) , 9-10 March 2015 , Universiti Malaysia Pahang, Gambang, Pahang. p. 1..

Nurulasma, Zainudin and M. M., Yusoff and K. F., Chong (2015) A Promising Electrochemical Sensing Platform Based On A Graphene Nanomaterials For Sensitive Sulfite Determination. In: 2nd International Conference on Biomedical Engineering (ICoBE 2015) , 30-31 March 2015 , Penang. pp. 1-4..

Odili, Julius Beneoluchi and M. N. M., Kahar and Shahid, Anwar and Azrag, M. A. K. (2015) A Comparative Study of African Buffalo Optimization and Randomized Insertion Algorithm for Asymmetric Travelling Salesman's Problem. In: 4th International Conference on Software Engineering and Computer Systems (ICSECS'15) , 19-21 August 2015 , Kuantan, Pahang. pp. 90-95.. ISBN 978-1-4673-6722-6

Ooi, Jessie and Hongwu, Qin and Ma, Xiuqin and Siau-Chuin, Liew (2015) A Survey of Query Expansion, Query Suggestion and Query Refinement Techniques. In: 4th International Conference on Software Engineering and Computer Systems (ICSECS 2015) , 19-21 August 2015 , Kuantan, Pahang. pp. 1-7.. ISBN 978-1-4673-6722-6

Osamah, I. Khalaf and Norrozila, Sulaiman and Ghaidaa M., Abdilsahib (2015) Effect of Different Error Correction Algorithms on Video Quality over Heterogeneous Networks. In: International Conference on Computer Science & Computational Mathematics , 7-8 May 2015 , Langkawi, Kedah. , 495. (Unpublished)

Oumer, Abduaziz Jama and Cheng, Jack Kie and Razman, Mat Tahar (2015) Green manufacturing and logistics in automotive industry: A simulation model. In: 2015 9th International Conference on IT in Asia: Transforming Big Data into Knowledge, CITA 2015 , 4-5 Aug. 2015 , Kota Samarahan, Malaysia. pp. 1-6. (7349839). ISBN 9781479999392

Pebrianti, Dwi and Rosdiyana, Samad and Mahfuzah, Mustafa and Nor Rul Hasma, Abdullah and Bayuaji, Luhur (2015) Bank of Kalman Filters for Fault Detection in Quadrotor MAV. In: Malaysian Technical Universities Conference On Engineering And Technology (MUCET 2015) , 11-13 October 2015 , Johor Bahru. . (Unpublished)

Poobalan, Kumaraguru and Liew, Siau-Chuin (2015) Fire Detection Based on Color Filters and Bag-of- Features Classification. In: IEEE Student Conference on Research and Development (SCOReD 2015) , 13-14 December 2015 , Kuala Lumpur . pp. 389-392.. ISBN 978-1-4673-9571-7

Poobalan, Kumarguru and Liew, Siau-Chuin (2015) Fire Detection Algorithm using Image Processing Techniques. In: E-Proceeding of the 3rd International Conference on Artificial Intelligence and Computer Science (AICS2015) , 12-13 October 2015 , BayView Hotel, Penang, Malaysia. pp. 160-168.. ISBN 978-967-0792-06-4 (Online)

Putri Shazlia, Rosman (2015) Water Quality Assessment of Muar River Using Environmetric Techniques and Artificial Neural Networks. In: Proceeding of Engineering Technology International Conference (ETIC 2015) , 10-11 August 2015 , Bali, Indonesia. pp. 1-8..

Qian, Long Kweh and Noor Azlinna, Azizan and Irene, Wei Kiong Ting and Wen-Min, Lu (2015) The Impacts of Risk Management Structure on Efficiency Performance in Politically Connected Malaysian General Insurance Companies. In: Asian Academy Of Management , 2-5 Oct 2015 , Penang. . (Unpublished)

R., Daud and Mohammed Rafiq, Abdul Kadir and Sudin, Izman and Mas Ayu, Hassan and Hanumantharao, Balaji Raghavendran and Tunku, Kamarul (2015) Development of Talus Implant based on Artificial Neural Network prediction of Talus Morphological Parameters. In: 1st International Conference on Materials and Manufacturing Engineering and Technology , 28-31 July 2015 , Korea. . (Unpublished)

R., Daud and N. Zara, Kolan and Mas Ayu, Hassan and Siti Haryani, Tomadi and Sudin, Izman (2015) Study of Flow and Temperature Effect on Carbon Steel in Oil and Gas Environment. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015) , 19-22 Sept 2015 , Johor Bahru. . (Unpublished)

R., Daud and Suaidah, S. and Mohammed Rafiq, Abdul Kadir and Sudin, Izman and Mas Ayu, Hassan and Hanumantharao, Balaji Raghavendran and Tunku, Kamarul (2015) Deveploment of Novel Talus Implant Based on Artificial Neural Network Prediction of Talus Morphological Parameters. In: World Bio Summit & Expo 2015 , 1-5 Nov 2015 , Dubai. . (Unpublished)

R., Ramesh and M. Y. M., Yunus and K., Ramesh (2015) Applications of Nonlinear Models to Measure and Predict Thermo Physical Properties of Binary Liquid Mixture1, 4 Dioxane with Bromo benzene at Various Temperatures. In: International Conference on Chemical Engineering and Technology , 20-21 August 2015 , London, United Kingdom. . (Unpublished)

Rabbi, M. F. and Yusnita, Rahayu and Kamarul Hawari, Ghazali (2015) Time Varying Channel Estimation for Amplify-and-Forward Relay Network. In: Proceedings of the 4th International Conference on Computer Science & Computational Mathematics (ICCSCM 2015) , 7-8 May 2015 , Langkawi, Kedah. pp. 527-531..

Rahimah, Embong and Nasir, Shafiq and Kusbiantoro, Andri (2015) Silica Extraction and Incineration Process of Sugarcane Bagasse Ash (SCBA) As Pozzolanic Materials: A Review. In: Proceeding of Engineering Technology International Conference (ETIC 2015) , 10-11 August 2015 , Bali, Indonesia. . (Unpublished)

Rahimah, Embong and Nasir , Shafiq and Kusbiantoro, Andri (2015) Extraction of Silica Gel from Agricultural Waste for Pozzolanic Application: A Review. In: 1st International Conference On Science, Engineering & Environment , 17-22 Nov 2015 , Tsu Mie, Japan. . (Unpublished)

Rahman, Md. Arafatur and Kabir, M. Nomani and Azad, Saiful and Ali, Jahan (2015) On mitigating hop-to-hop congestion problem in IoT enabled Intra-Vehicular communication. In: 4th International Conference on Software Engineering and Computer Systems (ICSECS2015) , 19-21 August 2015 , Kuantan, Pahang, Malaysia. pp. 213-217.. ISBN 978-1-4673-6722-6

Rahman, Md. Arafatur and Qusay, Medhat Salih and Mohamad Fadli, Zolkipli (2015) Design a Technique for Minimizing Unnecessary Handoff in Mobile Wireless Networks. In: 4th International Conference on Software Engineering and Computer Systems (ICSECS 2015) , 19-21 August 2015 , Kuantan, Pahang. pp. 218-222..

Rahman, Md. Arafatur and Savoia, Roberto and Uddin, Mohammad Moshee (2015) MCAST: Mobility-aware Channel-Availability based Channel Selection Technique. In: The 11th International Conference on Networking and Services , 24-29 May 2015 , Rome, Italy. . (Unpublished)

Ramle, Abid and Norida, Abdullah and Kalthom, Hussin and Rosli, Saadan and Mohamad, Bokhari (2015) Testing Moderating Effects for the Causal Structure Model of Self-Action-Outcome (SAO Model). In: Proceedings, Vol. 1.: International Conference on New Directions In MultiDisciplinary Research & Practice (NDMRP 2015) , 12-13 May 2015 , Istanbul, Turkey. pp. 57-73..

Rassem, Taha H. and Mohammed, Mohammed Falah and Khoo, Bee Ee and Makbol, Nasrin M. (2015) Performance Evaluation of Completed Local Ternary Patterns (CLTP) for Medical, Scene and Event Image Categorisation. In: 4th International Conference on Software Engineering and Computer Systems (ICSECS 2015) , 19-21 August 2015 , Kuantan, Pahang. pp. 33-38.. ISBN 978-1-4673-6722-6

Rehan, Zainol Abidin and Gaanty Pragas, Maniam and Mohd Hasbi, Ab. Rahim (2015) Transesterification of Waste Cooking Oil Using K/Si/Fe3O4 Magnetic Composite as a Solid Catalyst. In: National Conference for Postgraduate Research (NCON-PGR 2015) , 24-25 January 2015 , Universiti Malaysia Pahang (UMP). .

Rehan, Zainol Abidin and Gaanty Pragas, Maniam and Mohd Hasbi, Ab. Rahim (2015) Utilization of De-Oiled Spent Bleaching Clay as a Catalyst for Transesterification of Palm Olein. In: Engineering Technology International Conference (ETIC 2015) , 10-11 August 2015 , Bali, Indonesia. .

Rehan, Zainol Abidin and Mohd Hasbi, Ab. Rahim and Gaanty Pragas, Maniam (2015) Utilization of Ca/Si/Fe3O4 Magnetic Composite as a Solid Catalyst in Transesterification of Waste Cooking Oil. In: Conference on Nano- & Bioresource March, 28-29 th 2015 Technology 2015 , 28-29 March 2015 . . (Unpublished)

Rohani, Abu Bakar and Kamal Z., Zamli and Basem, Al-Kazemi (2015) Late Acceptance Hill Climbing Based Strategy for Test Redundancy Reduction and Prioritization. In: Proceeding Book MUCET 2014, Volume: 1 Engineering & Technology , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 474-479., 9 (1).

Rokiah, Othman and Nasly, Mohamed Ali and Khairunisa, Muthusamy (2015) Influence of Eco Process Pozzolan on the properties of Foamed Concrete. In: 9th Asia Pacific Structural Engineering and Construction Conference & 8th ASEAN Civil Engineering Conference (APSEC-ACEC 2015) , 3-5 November 2015 , Universiti Teknologi Malaysia, Kuala Lumpur. pp. 1-6..

Roslinazairimah, Zakaria and Muhammad Az-Zuhri, Azman and Noor Fadhilah, Ahmad Radi (2015) Estimation of Missing Rainfall Data in Pahang using Modified Spatial Interpolation Weighting Methods. In: AIP Conference Proceeding, 65, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 65..

Roslinazairimah, Zakaria and Noor Fadhilah, Ahmad Radi and Muhammad Az-Zuhri, Azman (2015) Estimation of Missing Rainfall Data Using Spatial Interpolation and Imputation Methods. In: AIP Conference Proceeding, 42, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 42..

Roslinazairimah, Zakaria and Nor Hafizah, Moslim (2015) Independent Mixed-gamma Variables for Modelling Rainfall. In: 6th NAUN European Conference on Applied Mathematics and Informatics (AMATHI 2015) , 10-12 January 2015 , Spain. pp. 239-244..

Ruslan, Che Pee (2015) Teks Ucapan Ketua Pustakawan Di Majlis Perasmian Persidangan Kebangsaan Perpustakaan Akademik (NCOAL). In: Prosiding NCOAL 2015 - Persidangan Kebangsaan Perpustakaan Akademik , 17-18 March 2015 , Kuantan, Pahang. pp. 6-8.. ISBN 978-967-0691-68-8

S., Aid and I., Ismail and S. A., Wahid and M. S., A. Rahim (2015) Magnetorheological Fluid Materials Properties, Rheological Behaviour and Device Design in Valve Application. In: 2nd International Manufacturing Engineering Conference (IMEC2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

S. A., Che Ghani and W. S., Wan Harun and M. F. F., Ab Rashid and Rasidi, Ibrahim (2015) Numerical Analysis of Internal Flow Embedded in a Cutting Tool. In: Proceedings of Engineering Technology International Conference (ETIC 2015) , 10-11 August 2015 , Bali, Indonesia. pp. 1-5..

S. H., Teo and Gan, Leong Ming (2015) Speeding Driving Behaviour: Age And Gender Experimental Analysis. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. . (Unpublished)

S. N., Fadilah and N., Md. Saad and M. F., Abas and Noor Lina, Ramli (2015) Modeling and Simulation of UPFC or Dynamic Voltage Control in Power System Using PSCAD/EMTDC Software. In: International Conference on Electrical Control and Computer Engineering 2015 , 27-28 October 2015 , Kuantan, Pahang. pp. 1-6.. (Unpublished)

S. W., Ahmad and Azlan, Adnan and Rozaimi, Mohd Noor and Ramli, Nazir and Noor Nabilah, Sarbini and Khairunisa, Muthusamy and Awang, Taib and S. K. Muiz, S. K. Razak (2015) Ground Motion Prediction Equations for Far Field Earthquake Considered by Strike Slip Fault Mechanism. In: Proceedings of the 9th Asia Pacific Structural Engineering and Construction Conference (APSEC 2015) & 8th Asean Civil Engineering Conference (ACEC 2015) , 3-5 November 2015 , Universiti Teknologi Malaysia Kuala Lumpur (UTMKL). pp. 354-358..

S. W., Tan and Mohamad Fadli, Zolkipli and M., Rosyazwan and N., Hafizah and M., Shahrel (2015) Design And Development Of Wear Testing Analysis On Cylinder Head Valve. In: 2nd Integrated Design Project Conference (IDPC) 2015 , 11 December 2015 , Universiti Malaysia Pahang (UMP). pp. 1-14.. (Unpublished)

Sabrina, Tiun and Zakr, Hamed and Masnizah, Mohd and Noor Azlinda, Zainal Abidin and Ahmad Irfan, Ikmal Hisham (2015) Word sense disambiguation for English Quranic IR system. In: 2013 Taibah University International Conference on Advances in Information Technology for the Holy Quran and Its Sciences, NOORIC 2013 , 22 - 25 December 2013 , Madinah, Saudi Arabia. pp. 199-202. (7277246). ISBN 9781479928231

Safwan, Mohd Rawi and Zainah, Md. Zain (2015) Design and Development of an Underactuacted Autonomous Underwater Vehicle (X4-AUV) with Four-Inputs and Six-States. In: International Conference on Innovation in Science and Technology (IICIST 2015) , 20 Apr 2015 , Kuala Lumpur. . (Unpublished)

Sahimel Azwal, Sulaiman and Mohd Sham, Mohamad and Yuhani, Yusof (2015) Compatible Pair of Nontrivial Actions for Some Cyclic Groups of 2-Power Order. In: AIP Conference Proceeding, 700, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 700..

Sahimel Azwal, Sulaiman and Mohd Sham, Mohamad and Yuhani, Yusof and Nor Haniza, Sarmin and Nor Muhainiah, Mohd Ali and Tan, Lit Ken and Tahir, Shah (2015) Compatible pair of nontrivial actions for some cyclic groups of 2-power order. In: AIP Conference Proceedings: The 2nd ISM International Statistical Conference 2014 (ISM-II) , 12-14 August 2014 , Kuantan, Pahang, Malaysia. pp. 700-705., 1643. ISSN 0094-243X ISBN 978-0-7354-1281-1

Said, N. and R. M., Yunus and Abdul Aziz, Mohd Azoddein and Syafiqah, A. Khairuddin and Hajar Athirah, M. Sukri and Chuah, C. Wooi (2015) Green Palm Oil Mill Fuel Ash Zeolites (G-POMFAZ) Using Hydrothermal-Alkaline-Ultrasound Technique (HAUT). In: International Conference on Knowledge Transfer 2015 , 1-3 December 2015 , Putrajaya Marriott Hotel, Malaysia. . (Unpublished)

Saifful Kamaluddin, Muzakir (2015) Introduction to Faculty of Industrial Sciences and Technology (For Promotion and Publicity Usage). In: Program Lawatan Sambil Belajar dan Kem Matematik Sekolah SMK Ahmad, Pekan Ke UMP , 6 August 2015 , UMP Pekan Campus. pp. 1-5.. (Unpublished)

Saiful Nizam, Tajuddin and Nurul ‘Azyyati, Sabri and Nazira, Mahmud and M. M., Yusoff and Lee, Chin Mei and Maizatul Farhain, Ismail (2015) ELIMINIT: Combating Nitrite in Edible Bird Nest. In: 26th International Invention & Innovation Exhibition (ITEX 2015) , 21-23 May 2015 , Kuala Lumpur Convention Centre (KLCC), Malaysia. . (Unpublished)

Salwani, Mohd Salleh and M.S., Husaini (2015) Strain-Rate Sensitivity of Boron Alloyed Steel. In: Automotive Vehicle Technologies Conference 2015 , 23-25 November 2015 , Taksim, Istanbul. p. 1.. (Unpublished)

Salwani, Mohd Salleh and Muhammad Aiman, S. (2015) Energy Absorption Capability of Stainless Steel Type 304 and Type 316. In: International Conference on Intelligent Computing, Mechanical and Production Processes 2015 , 23-24 Sept 2015 , Penang. . (Unpublished)

Samira, Alizadeh and Abdolhamid, Dehvari and Akbari, Abolghasem (2015) Assessment of Climate Change in Order to Optimize Water Resources Planning. In: The 2th National Conference on Desert , 11-12 November 2014 , Semnan University, Semnan, Iran. pp. 1-9..

Samira, Alizadeh and Abdolhamid, Dehvari and Akbari, Abolghasem (2015) The Effects of DEM Resolution in Extraction of Physiographic and Hydrological Characteristics of Karde-Dam Watershed. In: The 3rd International Conference on Rainwater Catchment Systems , 18-19 February 2015 , Birjan University, Birjand, Iran. pp. 1-9..

Santoso, Ardhi W. and Pebrianti, Dwi and Bayuaji, Luhur and Jasni, Mohamad Zain (2015) Performance of Various Speckle Reduction Filters on Synthetic Aperture Radar Image. In: 4th International Conference on Software Engineering and Computer Systems (ICSECS 2015) , 19-21 August 2015 , Kuantan, Pahang. pp. 11-14.. ISBN 978-1-4673-6722-6

Sarwari, Abdul Qahar and Muhammad Nubli, Abdul Wahab (2015) The Role of English Language Proficiency on Increase of Intercultural Communication Competence among International Postgraduate Students. In: International Conference of Language Learning and Teaching (ICoLLT 2015) , 1-3 October 2015 , Kuantan, Pahang. . (Unpublished)

Sayed Ahmed, Ebtehal Atta Elsayed and Abdullah, Ibrahim and Noor Azlinna, Azizan (2015) Wireless Technology to Handle Marketing Risks. In: 4th International Conference on Global Optimization and Its Applications (ICoGOIA2015) , 10-11 August 2015 , Universiti Malaysia Pahang (UMP). pp. 1-9..

Setiabudi, H. D. and Nurul, Ainirazali and S. F. R. M., Suhaimi and Fatin Nadia, Pauzi and K. H., Lim and Chin, S. Y. (2015) CO2 reforming of CH4 over Ni/SBA-15 catalyst: Effect of Nickel Loading. In: 4th Conference on Emerging Energy and Process Technology (CONCEPT2015) , 15-16 December 2015 , Melaka. p. 1.. (Unpublished)

Shahid, Anwar and Mohamad Fadli, Zolkipli and Aws Naser, Jaber and Jasni, Mohamad Zain and Zakira, Inayat and Odili, Julius Beneoluchi (2015) Response Option for Attacks Detected by Intrusion Detection System. In: 4th International Conference on Software Engineering and Computer Systems (ICSECS), 2015 , 19-21 August 2015 , Kuantan, Pahang. pp. 195-200..

Sharifah Maszura, Syed Mohsin and Noor Nabilah, Sarbini and I. S., Ibrahim and A. A., Saim (2015) Development of Shear Stress Equation Contributing from Steel Fibre in Reinforced Concrete. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015 , 11-13 October 2015 , Johor Bahru, Johor, Malaysia. pp. 1-7.. (In Press / Online First)

Siti Aisyah, Romli and Mahyuddin, Ismail (2015) Kesan Kejadian Histeria Dalam Kalangan Pelajar Sekolah. In: Prosiding Konvensyen Sains Islam 2015 (KONGSI'15) , 29 Oktober 2015 , Galeri Canselori, Bangunan Canselori USIM. pp. 1-9..

Siti Hajar, Mat Zani and Mior Ahmad Khushairi, Mohd Zahari and Nina Suhaity, Azmi (2015) Optimization of parameters affecting bioethanol production from oil palm frond juice by saccharomyces cerevisiae. In: Asian Congress on Biotechnology (ACB 2015) , 15-19 November 2015 , Kuala Lumpur. p. 1.. (Unpublished)

Siti Hajar, Mat Zani and Mior Ahmad Khushairi, Mohd Zahari and Nina Suhaity, Azmi (2015) Utilization of Oil Palm Frond (OPF) juice for the production of bioethanol. In: National Postgraduate Conference 2015; NCON-PGR 2015 , 24-25 January 2015 , Universiti Malaysia Pahang. pp. 1-2.. (Unpublished)

Siti Hawa, Apandi and Ruzaini, Abdullah Arshah (2015) A Design of Proposed Dashboard Model for Researchers in Social Research Network Sites. In: 2nd International Conference On Computational Science and Information Management (ICOCSIM-2015) , 19-21 August 2015 , Kuantan, Pahang. . (Unpublished)

Siti Kholijah, Abdul Mudalip and M. R., Abu Bakar and Fatmawati, Adam and Parveen, Jamal and Z., Alam (2015) Investigating the Role of Molecular Interactions in Polymorphism of Mefenamic Acid in Ethyl Acetate Solution. In: 228th Symposium Of Malaysian Chemical Engineers (SOMCHE 2015) , 21-22 October 2015 , Putrajaya. pp. 1-10.. (Unpublished)

Siti Normaziah, Ihsan and Rahmah, Mokhtar and Chan, Quok Qeith and Noraniza, Samat and Abbas Saliimi, Lokman and Azlina, Mohd Ariffin (2015) Data Analysis for Interactive Spanish (i-Spanish) in Virtual Reality Environment: A Case Study in University Malaysia Pahang (UMP). In: The Second International Conference on Computational Science and Information Management 2015 (COCSIM) , 19 -20 August 2015 , Swiss Garder Kuantan. .

Siti Norzaimalina, Abd Majid and Hafizoah, Kassim and Munira, Abdul Razak (2015) Evaluating the Creativity of a Product Using Creativity Measurement Tool. In: E-Proceeding of the International Conference on Social Science Research (ICSSR 2015) , 8-9 June 2015 , Melia Hotel, Kuala Lumpur. pp. 257-263..

Siti Rabiatull Aisha, Idris and Zetty Akhtar, Abd Malek and Hardinnawirda, Kahar (2015) A Review on Effect of Nickel Doping on Solder Joint Reliability. In: National Conference for Postgraduate Research (NCON-PGR 2015) , 24-25 January 2015 , Universiti Malaysia Pahang (UMP). pp. 1-16..

Siti Roslindar, Yaziz and Noor Azlinna, Azizan and Maizah Hura, Ahmad and Roslinazairimah, Zakaria and Agrawal, Manju and Boland, John (2015) Preliminary Analysis on Hybrid Box-Jenkins - GARCH Modeling In Forecasting Gold Price. In: AIP Conference Proceeding, 289, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 289..

Siti Salina, Saidin and Yulita Hanum, P. Iskandar and Noornina, Dahlan (2015) Examining Internet Addiction as a Mediating Role Towards Online Training Utilization and Employee Performance from the Task and Social Technology Fit Perspectives In Malaysia's ICT Industry. In: The 2nd International Symposium on Technology Management and Emerging Technologies (ISTMET 2015) , 25-27 August 2015 , Langkawi, Kedah. pp. 459-462.. ISBN 978-1-4799-1723-5

Siti Zubaidah, Sulaiman and R. M., Kasmani and A., Mustafa and Miss Hasimawaty, Mat Kiah (2015) Experimental and Simulation Study on Gas Explosion in Confined Pipe. In: The International Conference on Fluids and Chemical Engineering (FLUIDSCHE 2015) , 25-27 November 2015 , Langkawi, Kedah. pp. 1-13.. (Unpublished)

Sook, Fun Pang and Jolius, Gimbun and M. M., Yusoff and Luqman Chuah, Abdullah (2015) Microencapsulation of Polyphenols from Orthosiphon stamineus Leaves Extracts using Polysaccharide and Protein. In: Proceeding Book MUCET 2014, Volume: 1 Engineering & Technology , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 352-358..

Soon-Yew, Ju and Noor Azlinna, Azizan and Ramayah, Thurasamy (2015) Environmental Leadership and Employees' Organizational Citizenship Behavior Towards the Environment (OCBE): Psychological Distance as a Moderating Variable. In: Advances In Global Business Research: Proceedings of the 12th Annual World Congress of the Academy for Global Business Advancement (AGBA) , 16-19 November 2015 , Faculty of Industrial Management University of Malaysia Pahang, Kuantan, Pahang. pp. 949-953., 12 (1). ISSN 1549-9332

Sorooshian, Shahryar (2015) Modification of Risk Assessment Value to Test Industry Reliability. In: AIP Conference Proceeding 1660, 090009 : International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28–30 May 2014 , Penang, Malaysia. pp. 1-4..

Sridhathan, C. and N., Vigneswaran and Fahmi, Samsuri (2015) Power Line Based Biotelemetry System for Human Health Monitoring. In: The 2nd International Conference on Geological and Civil Engineering (ICGCE 2015) , 10-11 January 2015 , Dubai, UAE. pp. 67-71., 80. ISSN 2010-4618

Sunarti, Abd Rahman and A. L., Ahmad (2015) Performances of Automated Control System of Membrane Gas Absorption: Optimization Study. In: World Virtual Conference on Applied Sciences and Engineering Applications (WVCASEA 2015) , 27-29 March 2015 , Johor Bharu. pp. 1-20., 8 (1). ISSN 1978-2993 (Unpublished)

Suriati, Ghazali and Nurul F., Salim (2015) Green Synthesis of Silver Nanoparticle: Effect of Reaction PH and Temperature. In: International Conference on Chemistry and Chemical Engineering (ICCCE 2015) , 14-15 May 2015 , Amsterdam, The Netherlands. .

Sutarman, na and Jasni, Mohamad Zain and Mazlina, Abdul Majid and Arief, Hermawan (2015) Malaysian Sign Language Recognition Using Skeleton Data with Neural Network. In: International Conference on Science in Information Technology (ICSITECH 2015) , 27-28 Oct 2015 , Yogjakarta, Indonesia. . (Unpublished)

Syafiq Fauzi, Kamarulzaman and Yasunobu, Seiji (2015) Compound Learning Control for Autonomous Position and Obstacle Control of Aerial Hovering Vehicles. In: The 10th Asian Control Conference (ASCC 2015) , 31 May - 3 Jun 2015 , Kota Kinabalu, Sabah. pp. 1-6..

Syahrul A. C., Abdullah and Muhammad F. M., Nazri and H. C. Soh, Zainal and Kamal Z., Zamli (2015) Evaluation of Virtual Desktop Infrastructure host using User Workload Simulator. In: Conference on Open Systems , 24-26 August 2015 , Melaka. pp. 28-33..

Syahrulanuar, Ngah and Rohani, Abu Bakar and Abdullah, Embong (2015) Review of the Sigmoid Function Implementation into Digital Hardware. In: International Conference Of Computer Sciences & Information Management (ICOCSIM 2015) , 19-21 August 2015 , Kuantan, Pahang. . (Unpublished)

Syarifah, Abd Rahim and M. I. E., Azizi (2015) Stirring Speed Effect On Carbamazepine Saccharin (CBZ-SAC) Co-Crystal Crystallization Process. In: The International Conference on Fluids and Chemical Engineering (FLUIDSCHE 2015) , 25-27 November 2015 , Langkawi, Kedah. . (Unpublished)

Syifak Izhar, Hisham and Jasni, Mohamad Zain and Nurul Wahidah, Arshad and Siau-Chuin, Liew (2015) HILBERT-LSB-C as Authentication System for Color Medical Images. In: 4th International Conference on Software Engineering and Computer Systems , 19-21 August 2015 , Kuantan, Pahang, Malaysia. pp. 15-20.. (Unpublished)

T. K., Thanusha and R., Ramesh and N. A. F. A., Samad and Mohd Yusri, Mohd Yunus and K., Ramesh (2015) Measurement and Prediction of Fuel Oxygenates Mixtures Excess Thermophysical Properties - A Review. In: Malaysian Technical Universities Conference On Engineering And Technology (MUCET 2015) , 11-13 October 2015 , Johor Bahru. pp. 1-8.. (Unpublished)

T. M., Yusof and S., Anuar and Hassan, Ibrahim (2015) Thermal Analysis of a Ground Passive Cooling (GPC) Using Experimental Method. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

Tan, Suat Hian and Willy Wong, Xiu Fa (2015) Plant Stress Response Towards Different Light Spectrum. In: International Conference on Life Science & Biological Engineering , 4-6 November 2015 , Nagoya, Japan. . (Unpublished)

Tan, Xhing Rong and Norazura, Ismail (2015) Noise Induced Hearing Loss and Non-Auditory (Stress and Hypertension) Effects on Automotive Plant Workers Exposed to Noise. In: Engineering Technology International Conference (ETIC 2015) , 10-11 August 2015 , Bali, Indonesia. . (Unpublished)

Thajeel, Ekhlas Mhawi and Hamdan, Daniyal and M. H., Sulaiman and Mazin Mustafa, Mahdi (2015) Current Harmonics Reduction Of Non-Linear Load By Using An Optimal Controller For Active Power Filter. In: 4th International Conference on Global Optimization and Its Applications (ICoGOIA2015) , 10-11 August 2015 , Universiti Malaysia Pahang (UMP). pp. 1-9.. (Unpublished)

Thong , Weng Jie and M. A., Ameedeen (2015) A Model Driven Method to Represent Free Choice Petri Nets as Sequence Diagram. In: 4th International Conference on Software Engineering and Computer Systems (ICSECS 2015) , 19-21 August 2015 , Kuantan, Pahang. pp. 166-170.. ISBN 978-1-4673-6722-6

Tiong , Meng Chung and Hamdan, Daniyal (2015) Arduino Based Power Meter Using Instantaneous Power Calculation Method. In: International Conference On Electrical, Control and Computer Enginnering (INECCE2015) , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

W. N., Mawaa and R., Mamat and G., Najafi and Obed M., Ali and A., Aziz (2015) Engine Performance and Emission of Compression Ignition Engine Fuelled With Emulsified Biodiesel-Water. In: IOP Conference Series: Materials Science and Engineering : International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-7., 100 (012061). ISBN 1757-8981 (print); 1757-899X (online)

Wan Azlan, Wan Mohd Nowalid and A. R., Yusoff (2015) Integrated chatter avoidance and minimum quantity lubrication conditions for chatter vibration problem in the machining process. In: Advanced Manufacturing Processing Technology(AMPT2015) , 20-21 November 2015 , Madrid, Spain. p. 1.. (Submitted)

Wan Azlee, Wan Abdullah (2015) E-Dashboard: Inovasi Bagi Pengurusan Data Strategik. In: Prosiding NCOAL 2015 - Persidangan Kebangsaan Perpustakaan Akademik , 17-18 March 2015 , Kuantan, Pahang. pp. 83-102.. ISBN 978-967-0691-68-8

Wan Iryana, Wan Md Nor and Jasri, Mohamad (2015) Finite Element Simulation to Predict Wrinkling in Low Carbon Steel Deep Drawing Process Using Isotropic Model. In: 2nd International Conference on Mechanical Design and Manufacturing (ICMDM 2015) , 27-28 Disember 2015 , Phuket, Thailand. pp. 1-4.. (Unpublished)

Wan Muhammad Firdaus, Wan Sulaiman and Bakri, Hassan and Hamdan, Daniyal (2015) Analysis of Single Ended Primary Inductance Converter (Sepic) Efficiency and Losses. In: International Conference on Power, Energy, And Communication Systems (IPECS 2015) , 24-25 August 2015 , Universiti Malaysia Perlis. pp. 1-6., 72 (1). ISSN 0127-9696 (print); 2180-3722 (online) (In Press / Online First)

Wan Nazrul Helmy, Wan Mohd Zain and Asraf, Ahmad (2015) Transformasi Tadbir Urus Korporat Institusi Zakat Di Negeri Pahang Darul Makmur: Cabaran dan Prospek. In: Prosiding NCOZ 2015 - Persidangan Zakat Dalam Pembangunan Ekonomi Peringkat Kebangsaan 2015 = National Conference On Zakat and Economic Development 2015 , 1 June 2015 , Kuantan, Pahang. pp. 323-340..

Wen, Li Lim and Yuhani, Yusof (2015) Modeling Limit Languages via Limit Adjacency Matrix and Yusof-Goode Approaches. In: AIP Conference Proceedings: International Conference on Mathemathics, Engineering & Industrial Applications (ICoMEIA 2014) , 28-30 May 2014 , Pulau Pinang. pp. 1-7., 1660. ISBN 978-0-7354-1304-7

Weng, Jie Thong and M. A., Ameedeen (2015) A Survey of UML Tools. In: The 2nd International Conference on Advanced Data and Information Engineering (DaEng 2015) , 25-26 April 2015 , Bali, Indonesia. . ISSN 1432-8488

Wong, Fei Yong and Zulkifli, Ahmad@Manap and Idris, Mat Sahat (2015) Development and Analysis of Arrow for Archery. In: International Conference On Industrial And Design Engineering (INCIDE2015) , 12-13 September 2015 , Putrajaya. pp. 1-7.. (Unpublished)

Yap, H. T. and Ngien, S. K. (2015) Analysis of Flow Characteristics in Sewerage System. In: Awam International Conference on Civil Engineering (AICCE2015) , 9-11 September 2015 , PWTC, Kuala Lumpur, Malaysia. pp. 1-6..

Yin Tan, Yee and Addie Irawan, Hashim (2015) Combination of Transverse-Trot Gait Pattern for Quadruped Walking Robot. In: Proceeding of Colloquium on Robotics, Unmanned Systems and Cybernetics 2014 (CRUSC) , 20 November 2014 , Universiti Malaysia Pahang. pp. 56-60..

Yong, Ying Mei and Sharifah Intan Safina, Syed Zubir (2015) Perception on Mandarin Oral Presentation Among Non-Chinese Students. In: International Conference On Language Learning & Teaching (ICOLLT) , 1-3 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Yuhani, Yusof and Lim, Wen Li and Mohammad Hassan, Mudaber (2015) Modeling of DNA Single Stage Splicing Language via Yusof-Goode Approach: One String with Two Rules. In: AIP Conference Proceeding, 695, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. pp. 695-699.. ISBN 9780735412811

Yuhani, Yusof and Mudaber, Mohammad Hassan and Mohd Sham, Mohamad and Nadirah, Mohd Nasir (2015) Prediction Model of DNA Splicing Languages. In: Creation, Innovation, Technology & Research Exposition (CITReX 2015) , 09-10 March 2015 , Universiti Malaysia Pahang. .

Yuhani, Yusof and Wen, Li Lim and Norhayati, Rosli and Mohd Fariduddin, Mukhtar and Sahimel Azwal, Sulaiman (2015) Behaviour of DNA Splicing Language Predictor. In: Creation, Innovation, Technology & Research Exposition (CITReX 2015) , 09-10 March 2015 , Universiti Malaysia Pahang. .

Yuhani, Yusof and Wen, Li Lim and T. Elizabeth, Goode and Nor Haniza, Sarmin and Fong, Wan Heng and Mohd Firdaus, Abdul Wahab (2015) Molecular Aspects of DNA Splicing System. In: AIP Conference Proceeding : International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28-30 May 2015 , Penang, Malaysia. pp. 1-8., 1660 (050045).

Yusof, Hashim and Zahari, Taha (2015) Partial Least Square Method For Modelling Ergonomic Risks Factors On Express Bus Accidents In The East Coast Of Peninsular West Malaysia. In: AIP Conference Proceeding, 166, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 166..

Yusvana, Rama and Roslinazairimah, Zakaria and Farahanim, Misni (2015) Blended Student Learning Experience: Combining Virtual Learning Environment, 3D Design and Active Community Engagement within a Framework of Knowledge Transfer Program. In: Innovative Practices In Higher Education Expo 2015 (I-PHEX) , 6 August 2015 , Universiti Teknologi, Kuala Lumpur. pp. 1-9.. (Unpublished)

Yuvaraj, A. R. and Tay, Joo Hui and Siti Maznah, Kabeb and Lutfor, M. R. and M. M., Yusoff and Hegde, Gurumurthy (2015) Spacer Effect Caused by Azobenzene System in E/Z Isomerization: An Application for Optical Storage Device. In: National Conference for Postgraduate Research (NCON-PGR 2015) , 24-25 January 2015 , Universiti Malaysia Pahang (UMP). pp. 1-5..

Z. M., Hafizi and J. A., Epaarachchi (2015) Dynamic Response and Signal to Noise Ratio Investigation of NIR-FBG Dynamic Sensing System for Monitoring Thinwalled Composite Plate. In: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10..

Z. M., Hafizi and M. S., Idris and N. M. M., Ammar (2015) Study on the Behavior of Particles in High Reynolds Number in Semi Ellipse Lid Driven Cavity. In: Proceedings of The International MultiConference of Engineers and Computer Scientists 2015, Vol II, (IMECS) , 18-20 March 2015 , Hong Kong. pp. 786-791..

Z. M., Hafizi and Mohd Fadhlan, Yusof and Siregar, J. P. and Lim, Kok Sing (2015) The Applications of FBG sensor for Realtime Strain Mapping of Thin Composite Plate under Point Loading. In: International Conference on Advanced Mechanics, Power and Energy 2015 (AMPE2015) , 5-6 December 2015 , Shah Alam, Selangor. .

Z. M., Zain and Mohd Rizal, Arshad and M. M., Noh and Pebrianti, Dwi and N. M., Zain and K. A., A. Rahim (2015) Invariant Manifold for Extended Nonholonomic Double Integrator Systems. In: International Conferences on Electrical, Control and Computer Engineering (INECCE2015) , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Zahari, Taha and H. A., Salaam and Tuan Mohammad Yusoff, Tuan Ya (2015) Triple Bottom Line Optimization for Sustainable Product Design. In: The 16th Asia Pacific Industrial Engineering and Management System Conference , 8-11 December 2015 , Caravelle Hotel, Ho Chi Minh City, Vietnam. . (Unpublished)

Zahari, Taha and Hwa, Jen Yap and Mohammad Syawaludin Syafiq, Hassan and Wee, Kian Yeo (2015) Digital Analysis of Badminton Athlete Motion. In: International Conference on Movement, Health and Exercise (MOHE 2015) , 5-7 Oct 2015 , Penang. . (Unpublished)

Zahari, Taha and M. Ali, Hanafiah (2015) Estimation of Thermal Contact Conductance Between Blank and Tool Surface in Hot Stamping Process. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

Zahidy, Abd-Hamid and Noor Azlinna, Azizan and Sorooshian, Shahryar (2015) Acquisition of Experts’ Opinions to Explore the Drivers of Business Success in the Construction Industry. In: Advances In Global Business Research: Proceedings of the 12th Annual World Congress of the Academy for Global Business Advancement (AGBA) , 16-19 November 2015 , Faculty of Industrial Management University of Malaysia Pahang, Kuantan, Pahang. pp. 1096-1110., 12 (1). ISSN 1549-9332

Zainah, Md. Zain and M. R., Arshad and K. A., A. Rahim (2015) Double Integrator Model and Invariant Manifold Theory Algorithm for an X4-AUV. In: International Conferences on Electrical, Control and Computer Engineering (INECCE2015) , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Zainah, Md. Zain and N. N. A., Hanipah and Maziyah, Mat Noh and N., Harun and K. A. A., Rahim and N. M., Zain (2015) Sliding Mode Control of An X4-AUV. In: International Conferences on Electrical, Control and Computer Engineering (INECCE2015) , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Zainah, Md. Zain and Nur Fadzillah, Harun and Keigo, Watanabe and Isaku, Nagai (2015) Comparison of an X4-AUV Performance Using A Direct Lyapunov - PD Controller and Backstepping Approach. In: The 10th Asian Control Conference (ASCC 2015) , 31 May-3 June 2015 , Kota Kinabalu, Sabah. pp. 1-6., 3 (4). ISSN 2301-3796

Zarina, Dzolkhifli and Wan Nurul Safawati, Wan Manan and Mohd Hafiz, Mohd Hassin and Hamidah, Ibrahim (2015) Pre-Fetch Data Caching Strategy in Mobile Database System for Integrity Constraints Checking. In: International Conference on Software Engineering & Computer Systems (ICSECS 2015) , 19-20 Aug 2015 , Kuantan, Pahang. . (Unpublished)

Zarith Sufia, Azlan and Nur Syamimi, Zulkefli and Nurhaizan, Mohd Zainudin and Puteri Fadzline, Muhamad Tamyez (2015) Awareness of Green Building Index (GBI) Implementation among Malaysian Contractors. In: Malaysian Technical Universities Conference On Engineering And Technology (MUCET 2015) , 11-13 October 2015 , Johor Bahru. pp. 1-11.. (Unpublished)

Zulkhibri, Ismail and Khan, Ilyas and Nadirah, Mohd Nasir and Rahimah, Jusoh and Mohd Zuki, Salleh and Sharidan, Shafie (2015) The Effects Of Magnetohydrodynamic And Radiation On Flow Of Second Grade Fluid Past An Infinite Inclined Plate In Porous Medium. In: AIP Conference Proceeding, 563, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 563..

Zulkhibri, Ismail and Khan, Ilyas and Rahimah, Jusoh and Nadirah, Mohd Nasir and Mohd Zuki, Salleh and Sharidan, Shafie (2015) Rotation Effects on Unsteady Magnetohydrodynamic Second Grade Fluid Flow In A Porous Medium Past An Infinite Inclined Plate. In: AIP Conference Proceeding, 555, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 555..

Zulkifli, Md. Yusof and Ismail, Ibrahim and Siti Nurzulaikha, Satiman and Zuwairie, Ibrahim and Nor Hidayati, Abd Aziz and Nor Azlina, Ab. Aziz (2015) BSKF: Binary Simulated Kalman Filter. In: International Conference on Artificial Intelligence, Modelling and Simuation , 2-4 December 2015 , Kota Kinabalu, Sabah. pp. 1-5..

Zulkifli, Md. Yusof and Zuwairie, Ibrahim and Ismail, Ibrahim and Kamil Zakwan, Mohd Azmi and Nor Azlina, Ab. Aziz and Nor Hidayati, Abd. Aziz and Mohd Saberi, Mohamad (2015) Distance Evaluated Simulated Kalman Filter for Combinatorial Optimization Problems. In: International Conference on Electrical Control and Computer Engineering 2015 , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Zulsyazwan, Ahmad Khushairi and Hafizuddin, Wan Yussof and N., Zainol and R. A., Samah and Nurul Atikah, Rodzri (2015) Screening of Factors Affecting Ferulic Acid Production from Oil Palm Frond Waste via Mix Culture Hydrolysis: Interaction between Factors. In: The International Conference on Fluids and Chemical Engineering (FluidsChE) 2015 , 25-27 November 2015 , Langkawi, Kedah. . (Unpublished)

Zuraina, Ali (2015) Students' Perceptions and Usability of Playing AcadS, a Board and Card Sentence Building Game. In: The Pekan International Education Conference (PIEC 2015) , 28-30 August 2015 , The International College of Automotive (ICAM), Pekan, Pahang, Malaysia. pp. 204-207..

Zuraina, Ali and Mohd Amir Izuddin, Mohamad Ghazali (2015) VocBlast: A Qualitative Evaluation on the Use Vocabulary Mobile App From Teachers’ Views. In: e - Proceeding of the Global Conference on Technology in Language Learning (GLIT 2015) , 8-9 June 2015 , Kuala Lumpur. pp. 99-111..

Zuraina, Ali and Mohd Amir Izuddin, Mohamad Ghazali and Supyan, Hussin and Ahmad Fauzi, Mohd Ayub and Hafizoah, Kassim and Nadia, Muhammad and Rosnani, Ismail and Siti Norzaimalina, Abd Majid (2015) VocBlast: A Preview of a Mobile Vocabulary Application to Learn Specialized Engineering Vocabulary. In: The 3rd International Conference on Language, Education and Innovation (ICLEI 2015) , 12-13 December 2015 , Bali, Indonesia. pp. 30-36., 8 (3). ISSN 1930-2126 (Unpublished)

Zuraina, Ali and Nurul Nadia, Muhammad and Hafizoah, Kassim and Siti Norzaimalina, Abd Majid and Rosnani, Ismail and Mohd Amir Izuddin, Mohamad Ghazali and Supyan, Hussin and Ahmad Fauzi, Ayob (2015) Entertainment VS. Education: Students’ Perspectives on the Use of Apps. In: Proceedings of the International Seminar on Language Teaching ISeLT 2015 , 4-5 February 2015 , Bangi, Selangor. .

Zuriani, Mustaffa and M. H., Sulaiman and M. N. M., Kahar (2015) Training LSSVM with GWO for Price Forecasting. In: 4th International Conference on Informatics, Electronics and Vision (ICIEV2015) , 15-18 Jun 2015 , Fukuoka, Japan. pp. 1-6..

Zuriani, Mustaffa and Mohd Herwan, Sulaiman and M. N. M., Kahar (2015) LS-SVM Hyper-parameters Optimization Based on GWO Algorithm for Time Series Forecasting. In: IEEE 4th International Conference On Software Engineering & Computer Systems (ICSECS15) , 19-21 August 2015 , Kuantan, Pahang. pp. 183-188..

Zuriani, Mustaffa and Yuhanis, Yusof (2015) Time Series Forecasting of Energy Commodity using Grey Wolf Optimizer. In: Proceedings of the International MultiConference of Engineers and Computer Scientist (IMECS 2015) , 18-20 March 2015 , Hong Kong. pp. 25-30..

Zuwairie, Ibrahim and Mohd Ibrahim, Shapiai and Siti Nurzulaikha, Satiman and Mohd Saberi, Mohamad and Nurul Wahidah, Arshad (2015) A Complete Investigation of Using Weighted Kernel Regression for The Case of Small Sample Problem With Noise. In: International Conferences on Electrical, Control and Computer Engineering (INECCE2015) , 27-28 Oct 2015 , Kuantan, Pahang. . (Unpublished)

Reports

Abd Rahman, Safie (2015) UMP annual report 2015. Other. Penerbit Universiti Malaysia Pahang, Kuantan.

Newspaper

Abd Ghani, Ainal Marhaton (2015) Hanya tinggal kenangan. Harian Metro .

Abd Mutalib, Zanariah (2015) UMP bangun model pembinaan 3D. Berita Harian .

Abdul Kahar, Abdullah (2015) Sukarelawan iM4U sentiasa bersedia. Berita Harian .

Abdul Rahman, Ahmad (2015) Mahasiswa UMP curah bakti bersama masyarakat Laos dan Thailand. UMP News . (Unpublished)

Ahmad, Mohd Hafizi and Ariffin, Ahmad Zainul (2015) Beberapa universiti setuju KPT haramkan vape: 'Lebih baik mencegah daripada mengubati'. Kosmo .

Ahmad Hilmy, Agir (2015) Kejohanan bowling erat hubungan warga kampus UMP. UMP News . (Unpublished)

Ahmad Hilmy, Agir (2015) Majlis Hari Raya kampus Pekan meriah. UMP News . (Unpublished)

Ahmad Irfan, Ikmal Hisham (2015) Keindahan pelaksanaan hudud sepanjang zaman. Berita Harian .

Ahmad Zakki, Jilan (2015) Polisas jalin kerjasama dengan UMP, AmMetlife Insurance. Utusan Malaysia .

Ahmad Zakki, Jilan (2015) UMP tawar teknologi bina rumah mangsa banjir. Utusan Malaysia . p. 24.

Ahmad Ziad, Sulaiman (2015) Kursus Asas Perajurit Muda Sukarela uji ketahanan disiplin dan mental peserta. UMP News . (Unpublished)

Ahmad Ziad, Sulaiman (2015) UMP, UTM anjur pertandingan 3 minutes thesis 2015. UMP News . (Unpublished)

Ainal Marhaton, Abd Ghani (2015) Latihan jadi tentera. Berita Harian .

Aini, Ahmad (2015) Sesungguhnya aku berpuasa. Utusan Malaysia .

Ainul Fatihah, Mansor (2015) UMP cipta kit antihisteria halau setan. Harian Metro .

Alagesh, T.N. (2015) Man dies, wife injured in first trip outside India. New Straits Times .

Ali, Mahathir (2015) Empower ECER Mahkota bantu murid orang asli peroleh 5A. Mingguan Malaysia .

Amin Ridzuan, Ishak (2015) UMP bina rumah kabin. Berita Harian .

Amin Ridzuan, Ishak and Syafikha, Sazili and Nor Amalina, Alias and Siti Rohana, Idris and Ahmad Suhael, Adnan and Nur Izzati, Muhammad (2015) Baik pulih kenderaan percuma; pelbagai pihak tampil bantu ringankan beban mangsa banjir. Berita Harian .

Amira Alia, Zulkifli (2015) Mahasiswa UMP hulur bantuan kanak-kanak mangsa taufan Haiyan dan gelandangan. UMP News . (Unpublished)

Asraf, Ahmad (2015) Kesukarelawan Pendidikan Mahasiswa UMP bersama pelajar SMK Tengku Indra Putra 1. UMP News . (Unpublished)

Asraf, Ahmad (2015) Kesukarelawan pendidikan In-Smartive. UMP News . (Unpublished)

Asraf, Ahmad (2015) Kesukarelawanan pendidikan mahasiswa In-Smartive di Perlis dan Thailand. UMP News .

Asraf, Ahmad (2015) Projek Kilauan Mutiara UMP bantu Sekolah Kluster Kecemerlangan. UMP News .

Asraf, Ahmad and Nor ‘Aisyatul Sakinah, Baharudin (2015) Kelab In-Smartive UMP bimbing Calon UPSR SK Wira. UMP News . (Unpublished)

Asraf, Ahmad and Nor ‘Aisyatul Sakinah, Baharudin (2015) Mahasiswa In-Smartive bantu pelajar sekolah Jengka. UMP News . (Unpublished)

Asraf, Ahmad and Nor ‘Aisyatul Sakinah, Baharudin (2015) Mahasiswa UMP curah bakti. UMP News . (Unpublished)

Asraf, Ahmad and UMP, PNC and Nor ‘Aisyatul Sakinah, Baharudin (2015) In-Smartive suntik semangat jati diri 100 pelajar SMK Bandar Tasik Selatan. UMP News . (Unpublished)

Asrol, Awang (2015) 56 skuad rentap futsal. Harian Metro .

Asrol, Awang (2015) UMP jalin kerjasama program dwi-ijazah. Berita Harian .

Aswany, Omar (2015) IPT pertama di dunia guna CGPA. Sinar Harian .

Azazi, Mamat (2015) Sambutan hari sukan galak warga UMP amalkan gaya hidup sihat. UMP News .

Azlina, Abd. Mubin (2015) UMP raih 2 pingat projek kesukarelaan terbaik. UMP News . (Unpublished)

Badrul Naim, Abidin (2015) Kumpulan Dikir Barat Warisan Sri Pujangga UMP ukir nama. UMP News . (Unpublished)

Dhiya', Zulhilmi Daud (2015) 29 mahasiswa timba pengalaman di Mexico. Utusan Malaysia .

Diana Surya, Abd Wahab (2015) Malaysia jadi pilihan pelajar asing. Sinar Harian .

Emma Melati, Burhanuddin (2015) Mahasiswa FteK bantu bersih tumpahan minyak. UMP News . (Unpublished)

Emma Melati, Burhanuddin and Nurul Nadia, Nor Hamran (2015) UMP jalin kerjasama dengan NIU tawar program dwi-ijazah. UMP News . (Unpublished)

Emma Melati, Burhanuddin and Nurul Nadia, Nor Hamran (2015) UMP terokai peluang kerjasama dengan University of Houstan Amerika Syarikat. UMP News . (Unpublished)

Erma Yusnida, Jusoh (2015) UMP perkenal program Mygift. Sinar Harian .

Ezrin Hani, Sukadarin (2015) Penyelidik UMP pantau kualiti udara akibat jerebu. UMP News .

Fakhrurrazi, Usuldin (2015) Tanda aras cemerlang. Harian Metro .

Fazrol, Nasir (2015) Bawa bekal kaedah berjimat. Berita Harian .

Fazrol, Nasir (2015) Program jom singgah sahur UMP di rumah anak yatim dan miskin Nur Iman. Berita Harian .

Haika, Khazi (2015) UA mampu tersenarai 100 universiti terbaik. Berita Harian .

Hasanudin, Ahmad (2015) Program Jalinan Kebitaraan Bahasa Malaysia. UMP News . (Unpublished)

Hasnah, Hussiin (2015) Kegawatan ekonomi bukan musibah jika berfikiran positif. Berita Harian .

Hazmin, Aris (2015) UMP anjur program pengurusan bakat staf bukan akademik. UMP News .

Ikhwan, Ideris (2015) Kutip tin sara lima adik. Kosmo .

Jilan, Ahmad Zakki (2015) 76 guru sertai program Empower ECER Mahkota. Utusan Malaysia .

Juliana, Mohd Ali (2015) Kolokium P & P kongsi kepakaran lahirkan Graduan Seimbang dan Holistik. UMP News . (Unpublished)

Juliana, Mohd Ali (2015) Pencapaian UMP dalam P & P diiktiraf. UMP News . (Unpublished)

Juliana, Mohd. Ali (2015) PPTI UMP serah sumbangan pasca banjir sempena Kempen '1 Makmum 1 Sejadah'. UMP News . (Unpublished)

Khairunnisa, Kamaruddin (2015) Tauke Woodydolly. Harian Metro .

Latib, Shahrinnahar (2015) Masyarakat Kuala Pahang terima manfaat. Utusan Malaysia .

Mahathir, Ali (2015) Majlis amanat tahunan UMP. Utusan Malaysia .

Mahfuz, Mohamad (2015) Lahirkan pereka barang kemas serba boleh. Kosmo .

Mimi Rabita, Abdul Wahit (2015) Kuasai bahasa inggeris menerusi PIE. Berita Harian .

Mimi Rabita, Abdul Wahit (2015) Suburkan tradisi. Berita Harian .

Mimi Rabita, Abdul Wahit (2015) Tauke 'percetakan'. Beita Harian .

Mimi Rabita, Abdul Wahit (2015) Teroka keunikan Mexico. Berita Harian .

Mimi Rabita, Abdul Wahit (2015) UMP tawar program dwiijazah. Berita Harian .

Mimi Rabita, Abdul Wahit (2015) UMP, BiotechCorp tawar program MBA Bioekonomi. Berita Harian .

Mohamad Aizat, Zaki (2015) Mahasiswa UMP jayakan Kem Interaksi Pemimpin Muda. UMP News . (Unpublished)

Mohamad Naufal, Mohamad Idris (2015) Kit anti histeria mula dipasarkan. Sinar Harian .

Mohamad Shofi, Mat Isa (2015) Malaysia ke-9 pilihan pelajar antarabangsa. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2015) Pekan Gambang pesat membangun. Utusan Malaysia .

Mohd Akmal, Azhar (2015) FTeK berjaya anjur persidangan ETIC. UMP News . (Unpublished)

Mohd Rafi, Mamat (2015) Detik manis tanpa ayah. Metro .

Mohd Rafi, Mamat (2015) Pasaran graduan UMP meningkat. Berita Harian .

Mohd Rafi, Mamat (2015) Prestasi antarabangsa kriteria pilihan. Berita Harian .

Mohd Rafi, Mamat (2015) Simpati insan mulia. Harian Metro .

Mohd Rafi, Mamat (2015) Warga universiti turun padang. Berita Harian .

Mohd Ridzuan, Abu Hassan (2015) Tawan puncak Gunung Kerinci. Sinar Harian .

Mohd Shariza, Abdullah (2015) UMP jadi pilihan program bertaraf antarabangsa. Utusan Malaysia .

Mohd. Raizalhilmy, Mohd. Rais (2015) Pengarah Urusan Motorola kongsi kepakaran dengan pelajar UMP. UMP News .

Mohd. Ruzaini, Hashim (2015) Program Trans U elemen menuju kegemilangan UMP. UMP News .

Mohd. Ruzaini, Hashim (2015) Program TransU perkukuh semangat sayang UMP. UMP News .

Mohd. Ruzaini, Hashim (2015) Staf UMP tingkat pengetahuan pengurusan arkib berkesan. UMP News .

Mohd. Ruzaini, Hashim (2015) UMP anjur Program Keberkatan dan Kecemerlangan Bekerja. UMP News .

Mohd. Ruzaini, Hashim (2015) UMP bangunkan model kompetensi dan kepimpinan staf. UMP News .

Mohd. Turmadzi, Madun (2015) Hasil penyelidikan dua tahun guna kaedah sains, perubatan Islam; UMP cipta kit antihisteria. Kosmo .

Mohd. Zaki, Ahmad (2015) UMP pamer Seni Pertahanan Diri di pentas dunia. UMP News . (Unpublished)

Muhammad Aizat, Azed (2015) Mahasiswa UMP terpilih dalam Mobiliti Antarabangsa Mahasiswa Malaysia-Mexico. UMP News . (Unpublished)

Muhammed Fawwaz, Abdul Rasid (2015) Pelajar Pendidikan Khas (Autisme) melawat UMP. UMP News .

Muhayudin, Salleh (2015) Pelajar UMP maut kereta jatuh gaung. Sinar Harian .

N. Feisal, Norawi (2015) Usahasama Jaip, UMP Lupus al-Quran. Sinar Harian .

Nas Norziela, Nasbah (2015) 48 universiti berentap peringkat prasuku akhir. Berita Harian .

Naufal, Samsudin (2015) UMP, JAIP agih 3,000 bubur lambuk. Berita Harian .

Nazatul Shima, Baroji (2015) Warga UMP serentak membaca untuk 10 minit. UMP News . (Unpublished)

Nik Min, Nik Amirulmu'min (2015) Pembangunan UMP beri kesan positif. Sinar Harian .

Noor Afiza, Mohd Asmi (2015) Baraqah Beggers raih kemenangan. UMP News . (Unpublished)

Noor Afiza, Mohd. Asmi (2015) Mahasiswa UMP pelajari budaya nusantara. UMP News . (Unpublished)

Noor Atiqah, Sulaiman (2015) Kit halau makhluk halus; kit antihisteria UMP rawat gangguan makhluk halus. Berita Harian .

Noor Azlina, Zainudin (2015) UMP siap siaga. Berita Harian .

Nor Adzizi, Najiruddin (2015) Cabaran mahasiswa UMP berkayak. UMP News .

Nor Adzizi, Najiruddin (2015) UMP pilih peserta bagi Pendakian Merdeka Kinabalu UMP 2015. UMP News . (Unpublished)

Nor Fadzillah, Zulkipli (2015) Mahasiswa generasi peneraju kecemerlangan. UMP News . (Unpublished)

Nor Fadzillah, Zulkipli (2015) Menelusuri jejak merdeka. UMP News . (Unpublished)

Nor Fadzillah, Zulkipli (2015) Naib Canselor UMP terima Anugerah Kepimpinan Pendidikan. UMP News . (Unpublished)

Nor Fadzillah, Zulkipli (2015) Pensyarah UMP menang anugerah TESLA IBC Cambridge bagi penerbitan biografi. UMP News . (Unpublished)

Nor Fadzillah, Zulkipli (2015) Program Leadership Diagnostic menilai prestasi kepimpinan ketua. UMP News .

Nor Fadzillah, Zulkipli (2015) Program Siswa Sihat berjalan 10 ribu langkah. UMP News . (Unpublished)

Nor Fadzillah, Zulkipli (2015) Program singgah sahur UMP erat hubungan dengan masyarakat. UMP News . (Unpublished)

Nor Fadzillah, Zulkipli (2015) UMP jalin kerjasama dengan Universiti Kazakhstan. UMP News .

Nor Fadzillah, Zulkipli (2015) UMP menjadi tanda aras terbaik pelaksanaan program OBE. UMP News . (Unpublished)

Nor Fadzillah, Zulkipli (2015) UMP terima 2274 pelajar baharu. UMP News . (Unpublished)

Nor Fadzillah, Zulkipli (2015) UMP tuan rumah pertandingan Debat Diraja antara IPT. UMP News . (Unpublished)

Nor ‘Aisyatul Sakinah, Baharudin (2015) Mahasiswa UMP bimbing pemimpin pelajar. UMP News . (Unpublished)

Norawazni, Yusof (2015) UMP berada di landasan tepat. Sinar Harian .

Norhayati, Ismail (2015) Seminar menjejak personaliti tingkat penampilan staf. UMP News . (Unpublished)

Nur Adam, Maximillian (2015) Pusat Sukan UMP anjur Sukan Pantai dan Tasik. UMP News . (Unpublished)

Nurul Akma, Mohamad Rani (2015) Mahasiswa UMP dan MBM bersama komuniti Kota Pariaman. UMP News .

Nurul Nadia, Nor Hamran and Wan Nur A’in, Mohd Kamal Ibrahim and Norhidayatul , Akmal Azahar (2015) FTeK anjur Bengkel Penyelenggaraan Enjin Bot bantu nelayan. UMP News . (Unpublished)

Nurulatiqah, Sahadan (2015) PBMSK dan Perpustakaan anjur program membaca RCP. UMP News . (Unpublished)

Raaff, Abdul Razak and Abd Ghani, Ainal Marhaton (2015) UMP peroleh status autonomi. Berita Harian .

Raja Abdul Aziz, Raja Norain Hidayah (2015) Lakar hala tuju sendiri. Harian Metro .

Raja Allen Jordan Izzuddin Shah, Raja Baharudin (2015) Khidmat masyarakat PTMK bantu pembelajaran kelas Kafa. UMP News . (Unpublished)

Rashiqah Ilmi, Abdul Rahim (2015) Gangguan emosi punca histeria. Sinar Harian .

Rosniza, Mohd Taha (2015) Ais kacang 'cairkan' pengunjung. Berita Harian .

Rosniza, Mohd Taha (2015) Inovasi bantu masyarakat. Berita Harian .

Rosniza, Mohd Taha (2015) Mahasiswa sepakat turun padang. Berita Harian .

Rosniza, Mohd Taha (2015) Mohamad Syafiq cetus gerakan sukarelawan. Berita Harian .

Ruhaiza , Rusmin (2015) Transformasi UA. Metro .

Salwani, Md Zain (2015) Manfaatkan zaman kampus. Sinar Harian .

Shahrinnahar, Latib (2015) UMP buka peluang dalam bidang keusahawanan. Utusan .

Shahrul Nizam, Mohamad (2015) Tragedi gaung. Metro .

Shalfarina, Shahriman (2015) Bazar buku manfaatkan pelajar UMP. UMP News . (Unpublished)

Shalfarina, Shahriman (2015) Bengkel Penulisan dan Penyediaan Modul Pengajaran tarik minat pensyarah menulis. UMP News . (Unpublished)

Shalfarina, Shahriman (2015) Ingat fakta menerusi format Ghani. Berita Harian .

Shalfarina, Shahriman (2015) Jurnal UMP jadi rujukan dunia. Berita Harian .

Shalfarina, Shahriman (2015) Penerbit UMP lancar buku software testing. UMP nEWS .

Shalfarina, Shahriman (2015) Penerbit dan FKM anjur Bengkel Penilaian Jurnal Scopus UMP. UMP News . (Unpublished)

Shalfarina, Shahriman (2015) Penerbit lancar 21 buku baru. UMP News . (Unpublished)

Shalfarina, Shahriman (2015) UMP terbit buku isu-isu berkaitan Akidah dan Syariah dalam perubatan tradisional. UMP News . (Unpublished)

Shalfarina, Shahriman (2015) UMP terima anugerah Cream bagi penerbitan jurnal IJAME. UMP News . (Unpublished)

Siti Norizat, Shikh Abdul Jalil (2015) Pelan strategik UMP diteruskan. Utusan Malaysia .

Siti Norizat, Shikh Abdul Jalil (2015) Semarak aidilfitri. Utusan Malaysia .

Siti Sarah, Mohamad Rajimi (2015) 60 peserta kayuhan berbasikal berkunjung ke UMP Pekan. UMP News . (Unpublished)

Siti Sarah, Mohamad Rajimi (2015) UMP hulur sumbangan bantu mangsa banjir di kalangan pengamal. UMP News . (Unpublished)

Suhana, Mohd Nor (2015) 50 staf baharu sertai Program Transformasi Minda. UMP News .

Suhana, Mohd Nor (2015) Program orientasi staf baharu UMP. UMP News .

Suraya, Roslan (2015) Wajar warta sesat. Harian Metro .

Syah Hairizal, Kamarul Arifin (2015) UMP, Kolej KLIA tandatangani MoU. Utusan Malaysia .

Syah Rul Aswari, Abdullah (2015) Anugerah suntik semangat. Harian Metro .

Syazwan, Msar (2015) 11 fakulti diiktiraf dunia. Berita Harian .

Syazwan, Nasir (2015) 11 fakulti terbaik di dunia. Harian Metro .

T. N., Alagesh and Zafira, Anwar (2015) UMP: anti-hysteria kit works. New Straits Time .

UMP, . (2015) 11 keluarga daif terima sumbangan UMP. Berita Harian .

UMP, . (2015) 1300 penuntut sertai Hari Sukan UMP. Utusan Malaysia .

UMP, . (2015) 159 anggota AW tamat kursus. Sinar Harian .

UMP, . (2015) 2 atlet dinobat olahragawan, olahragawati. Berita Harian .

UMP, . (2015) 20 syarikat, individu terima penganugerahan CIDB. Kosmo .

UMP, . (2015) 200 kakitangan UMP jayakan program mengacau bubur asyura sempena Muharam. Berita Harian .

UMP, . (2015) 2000 pelajar UMP sertai PROSIS. Berita Harian .

UMP, . (2015) 25 media personnel receive UMP aid. New Straits Times .

UMP, . (2015) 300 hasil penyelidikan pada hari terbuka UMP. Utusan Malaysia .

UMP, . (2015) 45 pendaki berjaya tawan Gunung Rajah di Bentong. Kosmo .

UMP, . (2015) 50 kereta nasional sertai konvoi merdeka UMP. Utusan Malaysia .

UMP, . (2015) 600 mahasiswa UMP sertai larian amal penyayang 2.0. Kosmo .

UMP, . (2015) Aktif hasilkan produk. Berita Harian .

UMP, . (2015) All in a day's work to build single mum a home. Berita Harian .

UMP, . (2015) Askar Wataniah tiga universiti tamat latihan. Kosmo .

UMP, . (2015) Banjir: UMP terima sumbangan syarikat swasta. Utusan Malaysia .

UMP, . (2015) Bantu masjid dilanda banjir. Sinar Harian .

UMP, . (2015) Beri peluang imam, siak lanjut pelajaran. Harian Metro .

UMP, . (2015) Bincang sebelum keluar zakat untuk pelarian Rohingya. Sinar Harian .

UMP, . (2015) Daing Nasir dilantik semula Naib Canselor. Berita Harian .

UMP, . (2015) Edar 100000 topeng muka. Harian Metro .

UMP, . (2015) Guna kontena bina rumah. Kosmo .

UMP, . (2015) Hibur si cilik rasa terkurung. Harian Metro .

UMP, . (2015) Huawei bantu graduan. Harian Metro .

UMP, . (2015) IPT digalak jaya program hijaukan bumi. Berita Harian .

UMP, . (2015) Inovasi e-pembelajaran UMP diiktiraf. Sinar Harian .

UMP, . (2015) JPNP pelawa IPT sertai program hijaukan bumi. Sinar Harian .

UMP, . (2015) KPTN 2015 bermula Ahad ini. Utusan Malaysia .

UMP, . (2015) Kit antihisteria UMP bukan cari untung. Berita Harian .

UMP, . (2015) Kompleks pentadbiran utama UMP beroperasi di Pekan. Utusan Malaysia .

UMP, . (2015) Kutip kotak, tin bantu tampung persekolahan adik. Sinar Harian .

UMP, . (2015) Larian warna warni. Harian Metro .

UMP, . (2015) MBM hantar tiga pelajar ke perhimpunan belia PBB di New York. Kosmo .

UMP, . (2015) Mahasiswa sertai UMP colour run. Kosmo .

UMP, . (2015) Malam pelajar antarabangsa UMP. Utusan Malaysia .

UMP, . (2015) Man continues to climb Gunung Rajah despite brush with death. New Straits Times .

UMP, . (2015) Pasukan khas kaji banjir. Harian Metro .

UMP, . (2015) Pelajar UMP menyerlah di Taiwan. Berita Harian .

UMP, . (2015) Pelajar cipta tutorial solat 3D. Harian Metro .

UMP, . (2015) Pembalakan, teroka tanah punca banjir. Sinar Harian .

UMP, . (2015) Penyelidik UMP cemerlang MTE 2015. Utusan Malaysia .

UMP, . (2015) Persidangan Mekanikal UMP perkasa bidang kejuruteraan automotif. Berita Harian .

UMP, . (2015) Projek serai wangi jana pendapatan penduduk. Harian Metro .

UMP, . (2015) Puncak Gunung Rajah ditawan. Sinar Harian .

UMP, . (2015) Satu fakulti di lima universiti perintis iCGPA. Sinar Harian .

UMP, . (2015) 'Saya tak pernah jemu didik anak bangsa'. Harian Metro .

UMP, . (2015) Semarak bidang mekatronik. Harian Metro .

UMP, . (2015) Semarak semangat bangsa merdeka. Sinar Harian .

UMP, . (2015) Serah Ph.D. Utusan Malaysia .

UMP, . (2015) Tak mahu hidup susah. Harian Metro .

UMP, . (2015) Tawan Gunung Kerinci. Berita Harian .

UMP, . (2015) Teroka pengalaman belajar di Turki. Berita Harian .

UMP, . (2015) Teruskan tradisi berbuka puasa dalam talam. Sinar Harian .

UMP, . (2015) 'There is always a scientific explanation'. New Straits Times .

UMP, . (2015) Tiga belia bawa nama negara. Berita Harian .

UMP, . (2015) UMP ambil langkah keselamatan. Sinar Harian .

UMP, . (2015) UMP anjur hari terbuka 9-10 Mac. Utusan Malaysia .

UMP, . (2015) UMP anjur karnival jualan bazar buku. Harian Metro .

UMP, . (2015) UMP bantu kanak-kanak gelandangan di Filipina. Berita Harian .

UMP, . (2015) UMP bantu peniaga promosi produk. Berita Harian .

UMP, . (2015) UMP berkonvoi semarakkan bulan kemerdekaan. Sinar Harian .

UMP, . (2015) UMP cadang bina rumah kontena. Sinar Harian .

UMP, . (2015) UMP cemerlang penyelidikan dan penerbitan. Utusan Malaysia .

UMP, . (2015) UMP cipta kit antihisteria. Utusan Malaysia .

UMP, . (2015) UMP jadi pilihan tawar program pengajian bertaraf dunia. Sinar Harian .

UMP, . (2015) UMP rangkul tiga pingat pada I-PHEX. Berita Harian .

UMP, . (2015) UMP salur maklumat. Harian Metro .

UMP, . (2015) UMP tawar pelbagai program lepasan SPM. Berita Harian .

UMP, . (2015) UMP terbit buku sihir dalam perubatan. Berita Harian .

UMP, . (2015) UMP terima 2,274 pelajar baharu. Utusan Malaysia .

UMP, . (2015) UMP terima zakat RM250,000. Sinar Harian .

UMP, . (2015) UMP, Bosch jalin MoU kemudahan latihan industri. Berita Harian .

UMP, . (2015) UMP, Ikwam bantu mangsa banjir. Utusan Malaysia .

UMP, . (2015) UMP, Keysight Technologies jalin kerjasama. Harian Metro .

UMP, LIB (2015) ARkids tarik minat prasekolah. Utusan Malaysia .

UMP, LIB (2015) Bendung 'trend' tidak sihat. Harian Metro .

UMP, LIB (2015) Bina 4 rumah dalam 6 minggu. Metro . p. 14.

UMP, LIB (2015) Dua sahabat maut kereta terjunam bawah tebing. Kosmo .

UMP, LIB (2015) Empower ECER UMP lahirkan usahawan baharu. Utusan Malaysia .

UMP, LIB (2015) Gred A bukan ukuran kejayaan dalam hidup. Berita Harian .

UMP, LIB (2015) Kerjasama DHU, UMP mampu maju industri automotif. Harian Metro .

UMP, LIB (2015) Minta Pusat Zakat salur dana bina rumah mangsa. Berita Harian . p. 18.

UMP, LIB (2015) MyGift jana kewangan UMP. Sinar Harian .

UMP, LIB (2015) Prosis UMP bentuk generasi muda sihat. Utusan .

UMP, LIB (2015) UMP dianugerah status autonomi. Mingguan Malaysia .

UMP, LIB (2015) UMP perkenal MyGift. Berita Harian .

UMP, PNC (2015) 12 beradik gembira terima sumbangan program jejak asnaf UMP. UMP News . (Unpublished)

UMP, PNC (2015) 218 atlit UMP bersaing dalam sukan MASUM. UMP News . (Unpublished)

UMP, PNC (2015) 25 hasil kajian dibentangkan dalam Persidangan Antarabangsa ICoGOIA. UMP News . (Unpublished)

UMP, PNC (2015) 300 penyelidikan jadi tarikan Hari Terbuka UMP. UMP News . (Unpublished)

UMP, PNC (2015) 46 staf bukan akademik terima surat kenaikan pangkat. UMP News .

UMP, PNC (2015) Alumni UMP turun padang bantu mangsa banjir Temerloh. UMP News . (Unpublished)

UMP, PNC (2015) Anugerah kokurikulum & sanjungan UMP iktiraf pencapaian pelajar. UMP News .

UMP, PNC (2015) Bangunan KPU UMP Pekan siap dan bakal beroperasi. UMP News .

UMP, PNC (2015) Bangunan PTMK dan PBMSK di UMP Pekan siap sepenuhnya. UMP News .

UMP, PNC (2015) Diari Ramadan untuk warga UMP. UMP News .

UMP, PNC (2015) Emeritus Profesor Dr. Robin W.King dalam syarahan Kejuruteraan Teknologi. UMP News .

UMP, PNC (2015) Had Kifayah hasil kajian UMP dengan kerjasama Pusat Kutipan Zakat Negeri Pahang. UMP News .

UMP, PNC (2015) Hari Terbuka UMP sebar maklumat pengajian tinggi terhadap masyarakat. UMP News . (Unpublished)

UMP, PNC (2015) Inovasi UMP hasilkan kit anti-histeria. UMP News .

UMP, PNC (2015) Jom Masuk IPT buka tirai karnival di Pahang. UMP News . (Unpublished)

UMP, PNC (2015) Jom makan durian erat hubungan baik UMP dan media. UMP News . (Unpublished)

UMP, PNC (2015) Karnival kerjaya dan pameran kerjaya berasaskan sektor manfaatkan pelajar UMP. UMP News . (Unpublished)

UMP, PNC (2015) Kolaborasi industri - akademia jalin hubungan baik. UMP News . (Unpublished)

UMP, PNC (2015) Kongsi budaya dalam Malam Antarabangsa UMP. UMP News .

UMP, PNC (2015) Konvoi Berbasikal Mahasiswa hangatkan promosi Expoconvo UMP. UMP News . (Unpublished)

UMP, PNC (2015) Konvoi Merdeka UMP semarakkan Sambutan Bulan Kemerdekaan. UMP News . (Unpublished)

UMP, PNC (2015) Kursus Masakan Empower Mahkota bantu belia dan ibu tunggal. UMP News . (Unpublished)

UMP, PNC (2015) Larian amal mahasiswa UMP dan amalan gaya hidup sihat. UMP News . (Unpublished)

UMP, PNC (2015) MPP UMP yang baharu angkat sumpah tunai kewajipan. UMP News .

UMP, PNC (2015) Mahasiswa UMP berbakti di Pulau Tioman. UMP News .

UMP, PNC (2015) Mahasiswa UMP bergotong-royong memasak bubur Asyura. UMP News .

UMP, PNC (2015) Mahasiswa UMP bincang hala tuju cabaran kontemporari. UMP News .

UMP, PNC (2015) Mahasiswa UMP cipta produk dari bahan kitar semula. UMP News .

UMP, PNC (2015) Majlis iftar pelajar antarabangsa meriah. UMP News . (Unpublished)

UMP, PNC (2015) Menteri KPT bangga dengan Program Kejuruteraan Jerman. UMP News . (Unpublished)

UMP, PNC (2015) Pahang destinasi pertama jelajah KPT `Soaring Upwards'. UMP News . (Unpublished)

UMP, PNC (2015) Pelajar tunai tanggungjawab pilih perwakilan dalam pilihanraya kampus. UMP News .

UMP, PNC (2015) Pensyarah UMP kongsi kepakaran dalam penulisan. UMP News . (Unpublished)

UMP, PNC (2015) Pensyarah UMP menang Anugerah Cabaran Inovasi Inklusif MOSTI. UMP News . (Unpublished)

UMP, PNC (2015) Penyelidik muda UMP menang 6 pingat di IWIS 2015 Poland. UMP News .

UMP, PNC (2015) Penyelidikan UMP menang anugerah ITEX. UMP News .

UMP, PNC (2015) Perisian bahasa isyarat e-MySL & MyKOD diiktiraf. UMP News .

UMP, PNC (2015) Perpustakaan UMP anjur NCOAL. UMP News . (Unpublished)

UMP, PNC (2015) Peserta Latihan Kemahiran Empower ECER Iftar bersama warga UMP. UMP News . (Unpublished)

UMP, PNC (2015) Prof.Dr Mashitah dilantik Penolong Pesuruhjaya Kehormat JPAM. UMP News . (Unpublished)

UMP, PNC (2015) Profesor Kamal bincang kaedah pengujian perisian dan kaitan dengan fenomena alam semula jadi. UMP News .

UMP, PNC (2015) Program PIE tingkat penguasaan mahasiswa antarabangsa berbahasa Inggeris. UMP News . (Unpublished)

UMP, PNC (2015) Program PPRN manfaatkan industri dan usahawan. UMP News . (Unpublished)

UMP, PNC (2015) Program Penanaman Serai Wangi dan Kraftangan Jerami bantu ibu tunggal dan miskin. UMP News .

UMP, PNC (2015) Program Selangkah ke Menara Gading manfaatkan pelajar luar bandar. UMP News . (Unpublished)

UMP, PNC (2015) Program berjalan 10,000 langkah meriahkan Kempen Gaya Hidup Sihat UMP. UMP News .

UMP, PNC (2015) Seramai 2150 sukarelawan IPT bantu operasi pasca banjir. UMP News . (Unpublished)

UMP, PNC (2015) Sukarelawan UMP dan IKWAM serah sumbangan kepada mangsa banjir. UMP News . (Unpublished)

UMP, PNC (2015) Tazkirah Ramadan dan sumbangan kuih raya Matahari. UMP News . (Unpublished)

UMP, PNC (2015) UMP Colour Run meriah. UMP News . (Unpublished)

UMP, PNC (2015) UMP agih sumbangan mangsa banjir perkampungan Bukit Rangin. UMP News . (Unpublished)

UMP, PNC (2015) UMP anjur Ceramah Kenegaraan. UMP News .

UMP, PNC (2015) UMP anjur Karnival Bola Keranjang Tiga Lawan Tiga Institusi Pengajian Tinggi (IPT). UMP News . (Unpublished)

UMP, PNC (2015) UMP anjur dialog berkaitan Perundangan Amalan Sihir. UMP News . (Unpublished)

UMP, PNC (2015) UMP berani berbeza memaknakan autonomi. UMP News . (Unpublished)

UMP, PNC (2015) UMP cemerlang penyelidikan dan penerbitan ilmiah. UMP News . (Unpublished)

UMP, PNC (2015) UMP dan RTM Pahang bertemu komuniti Sungai Koyan dalam program Kembara. UMP News . (Unpublished)

UMP, PNC (2015) UMP dan Swansea University metrai kerjasama dengan ECERDC bangunkan program penyelidikan. UMP News . (Unpublished)

UMP, PNC (2015) UMP hasilkan lemang meriahkan pesta lemang besar-besaran. UMP News . (Unpublished)

UMP, PNC (2015) UMP iktiraf sumbangan atlet cemerlang. UMP News . (Unpublished)

UMP, PNC (2015) UMP jalin kerjasama dengan Bosch tawar biasiswa dan latihan industri. UMP News . (Unpublished)

UMP, PNC (2015) UMP jalin kerjasama strategik dengan SEDIA. UMP News .

UMP, PNC (2015) UMP jejak asnaf serah sumbangan untuk fakir miskin. UMP News .

UMP, PNC (2015) UMP kekalkan tradisi sedia juadah berbuka puasa dalam talam. UMP News .

UMP, PNC (2015) UMP lahir graduan perintis program dwiijazah mekatronik hasil kerjasama dengan HsKA. UMP News .

UMP, PNC (2015) UMP lancar program RCP bantu pelajar tingkat penguasaan bahasa Inggeris. UMP News .

UMP, PNC (2015) UMP metrai persefahaman dengan HTAA tingkat kecekapan perkhidmatan. UMP News .

UMP, PNC (2015) UMP perkenal program MyGift sebagai saluran sumbangan endowmen Universiti. UMP News .

UMP, PNC (2015) UMP rai staf akademik dan felo tamat pengajian. UMP News .

UMP, PNC (2015) UMP raih anugerah dan 9 pingat. UMP News . (Unpublished)

UMP, PNC (2015) UMP raikan bakal jemaah haji. UMP News . (Unpublished)

UMP, PNC (2015) UMP sumbang bubur lambuk untuk komuniti. UMP News . (Unpublished)

UMP, PNC (2015) UMP, ECERDC rai pelajar cemerlang dan peserta tamat latihan kemahiran dan keusahawanan program empower ECER Mahkota. UMP News . (Unpublished)

UMP, PNC (2015) UMP, MUIP bantu mangsa banjir dalam Gotong-Royong Mahkota Amal. UMP News . (Unpublished)

UMP, PNC (2015) UMPH Anjur Majlis Apresiasi Hargai Perunding Universiti. UMP News . (Unpublished)

UMP, PNC (2015) UMP­-UNS jalin kerjasama tawar program dwi­-PhD. UMP News .

UMP, PNC (2015) Wacana NC Bentang laporan interim pencapaian universiti. UMP News . (Unpublished)

UMP, PNC (2015) Warga UMP berjalan malam hargai nilai alam sekitar. UMP News .

UMP, PNC (2015) Warga UMP sambut Maulidur Rasul. UMP News . (Unpublished)

UMP, PNC (2015) Warga UMP semarakkan kemeriahan Expokonvo 2015. UMP News .

UMP, PNC (2015) Warga kampus semarakkan Festival Bayu Kenyalang 3.0. UMP News .

Yong, Ying Mei (2015) Pertandingan bertutur bahasa Mandarin anjuran MLCC dapat sambutan. UMP News . (Unpublished)

Zahrom, Basir (2015) Penarafan universiti dunia, autonomi lonjak pendidikan. Berita Harian .

Zainal, Bahari (2015) Lima strategi utama mantapkan UAE. UMP News . (Unpublished)

Zainal, Bahari (2015) Program Empower ECER Mahkota bantu golongan belia kembangkan perniagaan. UMP News . (Unpublished)

Zainal, Bahari (2015) UMP, ECERDC bangunkan Medan Ikan Bakar dan Pusat Pemprosesan Hasil Laut. UMP News . (Unpublished)

Zamzurina, Ahmad (2015) 2 beradik cari barang terpakai bantu ibu. Utusan Malaysia .

Zamzurina, Ahmad (2015) I-solat menang Anugerah Ciptaan Kreatif UMP. Utusan Malaysia .

Zuryaty, Zol (2015) Pasukan Elixir Racing sekolah kluster harumkan UMP. UMP News .

Research Book Profile

Chin, Sim Yee and Anwaruddin, Hisyam and Mohamad Rizza, Othman and Sumaiya, Zainal Abidin @ Murad (2015) Development of a reactive distillation column prototype to convert acrylic acid in the petrochemical wastewater to valuable butyl acrylate through esterification. , [Research Book Profile: Research Report] (Unpublished)

Hagos, Ftwi Yohaness and Rizalman, Mamat and Abdul Adam, Abdullah and Amir, Aziz and Omer, Ahmed Nurye and Abd. Rashid, Abd. Aziz (2015) Investigation of micro-explosion phenomenon in the combustion of tri-fuel (diesel, biodiesel and bioethanol) emulsion in compression ignition engines. , [Research Book Profile: Research Report] (Unpublished)

Research Report

Ajit, Azilah and Chin, Sim Yee and Zainol, Norazwina (2015) Biological cyanide treatment of petrochemical industry wastewater via bioremediation process. , [Research Report: Research Report] (Unpublished)

Irawan, Addie (2015) Development of mini forklift system for confined area. , [Research Report: Research Report] (Unpublished)

Yunus, M. Y. M. and Kanthasamy, Ramesh and Fatin Syazwana, Hashim (2015) Development of multivariate statistical process monitoring system using multidimensional scalling technique for continuous and batch-based process. , [Research Report: Research Report] (Unpublished)

Speech

Pejabat, Naib Canselor UMP (2015) Teks Ucapan Yang Hormat Profesor Dato’ Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang Sempena Majlis Anugerah Cendekia Bitara 2015. In: Majlis Anugerah Cendekia Bitara 2015, 20 Mei 2015, Zenith Hotel, Kuantan. (Unpublished)

Talk Series

Saifful Kamaluddin, Muzakir (2015) Introduction to Faculty of Industrial Sciences & Technology. Faculty of Industrial Sciences & Technology, University Malaysia Pahang (UMP). (Unpublished)

Thesis

Ahmad Affendi, Hashim (2015) An improved legibility guideline for text in web pages. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Majid, Mazlina).

Ahmad Afif, Mohd Faudzi (2015) Policy abstraction for transfer learning using learning vector quantization in reinforcement learning framework. PhD thesis, Kyushu University (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Fitri, Yusop (2015) Investigation of particulate matter and combustion characteristics of a diesel engine fueled with palm oil methyl ester and diesel blends. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Jahed, Mushtaq (2015) Habits and motives of reading newspaper among students in Al-Beroni Universiti of Afghanistan. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Nasser, Mohd Rose (2015) Kerangka kerja untuk pelaksanaan sistem pembuatan lean di perusahaan kecil dan sederhana (PKS) bagi komponen automotif. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Akindoyo, John Olabode (2015) Oil palm Empty Fruit Bunch (EFB) fiber reinforced poly(lactic) acid composites : effects of fiber treatment and impact modifier. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Alaa Mashjel, Ali (2015) Synthesis of novel high performance Polyurethane nanocomposites from castor oil as renewable Polyol : study on mechanical, thermal and barrier properties. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Anita, Abdul Rani (2015) Influence of spiritual intelligence, age and tenure on work performance of nurses in selected hospitals, Peninsular Malaysia. UNSPECIFIED thesis, Universiti Putra Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Asnul Hadi, Ahmad (2015) Effect of temporal thermal field on quality of semi-solid metal formed components. PhD thesis, Dublin City University (Contributors, UNSPECIFIED: UNSPECIFIED).

Auni Hamimi, Idris (2015) Incorporating energy generation process in environmental assessment of a biopharmaceutical process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Awanis, Romli (2015) Integrated eco-design decision making for sustainable product design. PhD thesis, Cardiff University (Contributors, UNSPECIFIED: UNSPECIFIED).

Azhar, Fakharuddin (2015) A dye – sensitized solar cell module with enhanced charge collection efficiency. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Azmi, W. H. (2015) Heat transfer augmentation of water based TIO2 AND SIO2 nanofluids in a tube with twisted tape. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Bahari, Mohamed (2015) The effects of perceived service quality on patient satisfaction and behavioral compliance at a multi speciality public hospital in state of Pahang. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Beny, Cahyono (2015) Effects of swirl at intake manifold on engine performance using ethanol fuel blend. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

D., Ramasamy (2015) Improvement of in cylinder airflow using dissimilar valve lift in a compressed natural gas bi-fuel engine. PhD thesis, Universiti Sains Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Dayang Siti Hazimmah, Ali (2015) Investigation on the properties of acrylic emulsion polymer based ordinary portland cement concrete reinforced with hooked steel fiber. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Khairunisa, Muthusamy).

Diyana, Kamarudin (2015) Comparing online and traditional interview techniques : a qualitative study of the experiences of researchers and participants in the Malaysian context. PhD thesis, Western Michigan University (Contributors, UNSPECIFIED: UNSPECIFIED).

Egbal Hassan, Altoum Mohammed (2015) Methane production from sewage sludge treatment by ultrasonicated membrane anaerobic system (UMAS). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdurahman, Hamid Nour).

Fadzil, Mat Yahaya (2015) Effects of by-product materials (POFA and PFA) as partial cement replacement on concretetowards corrosion reisitance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Farah Hanani, Zulkifli (2015) Biomimetic scaffolds based on hydroxyethyl cellulose for skin tissue engineering. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jahir Hussain, Fathiima Shahitha).

Fazliana, Fauzun (2015) Experimental and statistical analysis for surface modification of steel and cast iron using Nd:yag laser. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gan, Siew Mei (2015) Azobenzene-liquid crystal composite for fabrication of optical storage devices. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hegde, Gurumurthy).

Gisen, J. I. A. (2015) Prediction in ungauged estuaries. PhD thesis, Delft University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Gomaa Abdelgawad, Mohammed Ali (2015) Preparation and characterization of manganese-based and carbon-based nanomaterials for supercapasitors application. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hamzeh Taha, Salman Alkasasbeh (2015) Numerical solutions for convective boundary layer flow over a solid sphere of newtonion and non-newtonion fluids. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Zuki, Salleh).

Hassan Rahnaward, Ghulami (2015) Partial least squares path modelling of UMP students’ attitudes on statistics achievements. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hussain Kareem, Khleaf (2015) Electrocardiogram based heart disease diagnosis using artificial intelligence. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Intan Suhana, Mohd Razelan (2015) Development of composite risk index for federal roads in Malaysia. PhD thesis, Universiti Putra Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Irma, Nurfitri (2015) Methyl Ester production using feedstock and catalysts from waste sources. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Gaanty Pragas, A/L Maniam).

Jun Haslinda, Haji Shariffuddin (2015) Investigating the catalytic properties of hydroxyapatite derived from mussel shells for the treatment of wastewater. PhD thesis, The University of Auckland (Contributors, UNSPECIFIED: UNSPECIFIED).

K., Palaniselvam (2015) In-vitro biological activities of Au and Ag nanoparticles biosynthesized using commelina nudiflora L. aqueous extract. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Natanamurugaraj, Govindan).

Khalil Mesbah, AbdulJalil (2015) An investigation on user's intention to adopt accounting information system in Libyan small and medium enterprises: an analysis of structural equation modeling. UNSPECIFIED thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kong, Zi Ying (2015) Application of CuFe2O4 for photocatalytic fenton degradation of glycerol. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Cheng, Chin Kui).

Liang, Yong Yeow (2015) Concentration polarisation minimisation in membrane channels through electro-osmotic mixing. PhD thesis, Universiti of New South Wales (Contributors, Thesis advisor: Wiley, Dianne).

Lingenthiran, Samylingam (2015) Mechanical and physical properties of kenaf fibre reinforced thermoplastic elastomer composites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

M. Rafiqul, Islam (2015) An experimental study and modeling on gas metal arc welded lap joint of A7075-T651 aluminium alloy to AZ31B magnesium alloy. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ishak, Mahadzir).

Mahendran, Samykano (2015) Physical and mechanical characterization of electrodeposited nickel nanowires - influence of current density and external magnetic field. PhD thesis, North Carolina A&T State University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mas Ayu, Hassan (2015) Effects of hydroxyapatite coating with oxide interlayer on bioactivity performances in CoCrMo alloy. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Masood, Kamal (2015) A new hybrid multiaxial fatigue life model based on critical plane continuum damage mechanics and genetic algorithm. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Mustafizur, Rahman).

Mazza Seddig, Adam Abbakar (2015) Ultrasonicated Membrane Anaerobic System (UMAS) for sewage sludge treatment. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Md Abdus, Sobahan (2015) Effects of industrial wastewater on water and sediment qualities and effectiveness of bioremediation methods of industrial wastewater treatment, Gebeng, Pahang, Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad Basir, Bakhtyari (2015) Afghanistan students' perceptions of the use of online tools for enhancing learning. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad Hassan, Mudaber (2015) Persistency and permanency of two stages splicing languages based on DNA recombination process by using Yusof-Goode (Y-G) approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad Nasim, Tahsildar (2015) The impact of teaching cohesive devices on l2 students’ listening comprehension test scores and language accuracy in written production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed Adam, Kunna Azrag (2015) Kinetic paramaters identification for large-scle metabolic model of escherichia coli. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Tuty Asmawaty, Abdul Kadir).

Mohd Anwar, Zawawi (2015) An optical fibre sensor for physiological bending monitoring in clinical environment. PhD thesis, University of Limerick (Contributors, Thesis advisor: Elfed, Lewis).

Mohd Ashraf, Ahmad (2015) Model-free controller design based on simultaneous perturbation stochastic approximation. PhD thesis, Department of Systems Science (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Faizal, Ali (2015) Development of mucoadhesive biopolymers for food formulation. PhD thesis, University of Birmingham (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hazwan, Yusof (2015) A study on energy separation mechanism in Ranque-Hilsch vortex tube. PhD thesis, Kagoshima University (Contributors, Thesis advisor: Katanoda, Hiroshi).

Mohd Mawardi, Saari (2015) Development of a highly sensitive ACDC magnetometer utilizing high-Tc squid for characterization of magnetic mixture materials. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Rashidi, Maarof (2015) Effect of magnesium addition on the microstructure and properties of ductile Ni-resist alloy using in-mould magnesium treatment method. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Razali, Hanipah (2015) Development of a spark ignition free-piston engine generator. PhD thesis, Newcastle University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Rizauddin, Deraman (2015) Synthesis and characterization of platinum doped titania and silver doped titania for photo-catalytic degradation of pre-treated palm oil mill effluent. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Syakirin, Ramli (2015) A study on multi-agent systems for stable matching. PhD thesis, Kanazawa University, Japan (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd. Herzwan, Hamzah (2015) An experimental study on performance of diesel engine operating with waste tire and waste plastic derived fuel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).

Muhammad, Khan (2015) Antioxidant and anti-acetylcholinesterase potential from waste of selected solanaceous plants: isolation and identification of the active compound. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abduelrahman, Azhari Hamid Nour).

Muhammad Adib, Shaharun (2015) Effect of variable helix and pitch tool geometries on process damping performance in endmilling process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Hafiz, Mazwir (2015) Ketumpatan arus genting antara butiran superkonduktor Bi1.6Pb0.4Sr2Ca2Cu3O10 dalam bentuk pukal dan pita bersarung perak dengan penambahan nanozahrah magnet NiF2, CoFe2O4 dan Co0.5Ni0.5Fe2O4 sebagai pusat pengepinan fluks. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Nazrol, Zawawi (2015) New antenna for milimetre wave radar. PhD thesis, University of Nice Sophia Antipolis (Contributors, Thesis advisor: Migliaccio, Claire).

Muhammad Remanul, Islam (2015) Preparation and characterization of palm oil based polyalkyd films and composites with multi-walled carbon nanotubes. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Ridzuan, Kamaruzaman (2015) Chemical Equilibrium and kinetic study of the esterification of acrylic acid with butanol catalysed by sulfonated expanded polystyrene. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Chin, Sim Yee).

Mupit, Datusahlan (2015) Isolation and identification of lipolytic bacteria from galing river water kuantan to degrade waste cooking oil. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Faizal, Wan Ishak).

Nadheer Abdulridha, Shalash (2015) Fuzzy-based multi-agent approach for reliability assessment and improvement of power system protection. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nailah, Sa’adah (2015) Application of enzyme-producing bacteria for municipal solid waste biodegradation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Ishak, Wan Mohd Faizal).

Noor Sabrina, Ahmad Mutamim (2015) Aerobic submerged membrane bioreactor for spent caustic wastewater treatment. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Alisa, Mohd Damanhuri (2015) The numerical approximation to solutions for the double-slip and double-spin model for the deformation and flow of granular materials. PhD thesis, University of Manchester (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Hadzfizah, Mohd Radi (2015) Measurement and modeling of hand grip strength and endurance of Malaysian female. Masters thesis, Universiti Putra Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Maniha, Abdul Ghani (2015) Modelling and control of a reconfigurable multipurpose wheelchair for elderly/disabled mobility. PhD thesis, University of Sheffield (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor'Aqilah, Misman (2015) Integration of median filter and oriented field estimation for fingerprint identification system. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Norasyikin, Ismail (2015) Syngas production from microwave plasma gasification of oil palm char. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Norazaliza, Mohd Jamil (2015) Mathematical modeling and simulation of biofuel production from lignocellulosic biomass. PhD thesis, University of South Carolina (Contributors, UNSPECIFIED: UNSPECIFIED).

Norbaizurah, Rahman (2015) Effects of chemical reagents on the properties of fly ash based geopolymer. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norfariza, Ab. Wahab (2015) Modeling of cutting process and flow stress under high strain rate. PhD thesis, University of Agriculture and Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhidayah, Muhammad (2015) Enhance key generation algorithm based user string identity as public key. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norizam, Sulaiman (2015) Determination and classification of human stress index using non-parametric analysis of EEG signals. PhD thesis, Universiti Teknologi MARA (Contributors, Thesis advisor: Taib, Mohd Nasir).

Norlida, Jamil (2015) Electromagnetic force generation for dynamic modal testing applications. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norliza, Ishak (2015) Development of multivariate statistical process monitoring using combination MLR-PCA method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nugroho, Dewayanto (2015) Utilisation of decanter cake from palm oil milling plant as new substrate for the production of bio-oil through catalytic vacuum pyrolysis. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Atiqah , Ramlan (2015) A study on diesel engine performance using biodiesel from waste cooking oil (WCO). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Fauziah, Jaharudin (2015) Analysis of particulate matter emission in diesel engine operated with waste cooking oil biodiesel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).

Nur Shafiza Afzan, Sharif (2015) Synthesis and characterization of lead Zirconate Titanate (Pb[Zr0.52Ti0.48]O3) properties via high energy planetary ball milling. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurrina, Rosli (2015) Observation of free surface flow behavior using laser tagging method by photochromic dye tracer. PhD thesis, Gunma University (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Ain, Jalanni (2015) Synthesis,characterization and performance of triethanolamine-based thin film composite nanofiltration membrane. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Hidayah, Muhamad @ Ghazali (2015) Development of limestone based catalyst for biodiesel production from waste cooking oil. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Izwanie, Rasli (2015) Fabrication of chromatographic membrane via surface-grafted membrane for protein separation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Khairiyyah, Mohd Zain (2015) Synthesis and characterization of activated carbon from palm kernel shells for electrochemical double layer capacitor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Shamsinar, Shahirin (2015) Development of multiple interactions mixed matrix membrane chromatography for protein fractionation in chicken egg white. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Raja Mohd Taufika, Raja Ismail (2015) Modelling and control of offshore crane systems. PhD thesis, University of Technology, Sydney (Contributors, UNSPECIFIED: UNSPECIFIED).

Rajaletchumy, Veloo Kutty (2015) Targeted delivery of vitamin E TPGS based nanomedicine for treatment of triple negative breast cancer. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rasha, Mohammed Abd (2015) Emulsification and demulsification of water-in-crude oil emulsion via microwave-assisted chemical treatment. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rofilde, Hasudungan (2015) Generic DNA encoding design scheme to solve combinatorial problems. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rohayu, Jusoh (2015) Mesostructured silica nanoparticles supported electrosynthesized goethite in cationic surfactant for photodegradation of 2–chlorophenol. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Aishah, Abdul Jalil).

Rossyuhaida, Mohd Zakria (2015) Improved bioethanol production from oil palm trunk sap. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rozita, Mohd Yusof (2015) Image enhancement and segmentation on simultaneous latent fingerprint detection. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rozman, Mohd Tahar (2015) Characterization of titanium aluminide alloys synthesized by mechanical alloying technique. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ishak, Mahadzir).

Ruhaizad, Ishak (2015) Penempatan dan pensaizan optimum bagi penjana teragih dalam sistem kuasa untuk peningkatan kestabilan voltan. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Sabreen, Ramzi Alfarra (2015) Biosorption of Cd (II), Cu (II), Fe (III) And Pb (II) from water system using moringa oleifera leaves. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: N. Ali, Eman).

Saifful Kamaluddin, Muzakir (2015) Structural – electronic properties correlation of CdSe quantum dot solar cell using experimental and theoretical investigations. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Saifful Kamaluddin, Muzakir (2015) Structural–electronic properties correlation of CdSe quantum dot solar cell using experimental and theoretical investigations. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sayed Javid, Azimi (2015) Structural behaviour of kenaf fiber as part shear reinforcement in oil palm shell reinforced concrete beams. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sayed Qasim, Alavi (2015) Boundary layer stagnation point flow towards an exponentially stretching/shrinking sheet. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Salleh, Mohd Zuki).

Sharifah, Awang (2015) An investigation on leading characteristics of rapidkuantan bus passengers using correspondence analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zulkiple, Adnan).

Shoriya Aruni, Abdul Manaf (2015) Studies of bio waste materials from sago hampas and oil palm leaves for cell imaging applications. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: GURUMURTHY, HEGDE).

Siddique, Md. Nurul Islam (2015) Co-digestion of petrochemical wastewater with activated manure in continuous stirred tank reactor for methane production. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Wahid, Zularisam).

Siti Haryani, Tomadi (2015) Kebolehmesinan komposit matriks logam Al-Si/A1N menggunakan mata alat pemotong karbida. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Nur Sakinah, Jamaludin (2015) A parametric study on design and characteristics of stepwise-built functionally graded Hydroxyapatite/Titanium. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Basri, Shahnor).

Siti Zanariah, Satari (2015) Parameter estimation and outlier detection for some types of circular model. PhD thesis, University of Malaya (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Zubaidah, Sulaiman (2015) Gas explosion characteristics in confined straight and 90 degree bend pipes. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Soleh, Ardiansyah (2015) Rule extraction from multi-layer perceptron neural network using decision tree for currency exchange rates forecasting. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Suryanti, Awang (2015) Feature fusion using a modified genetic algorithm for face and signature recognition system. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Syafiq Fauzi, Kamarulzaman (2015) Design of multiple-functions controller based on machine learning. PhD thesis, University of Tsukuba (Contributors, Thesis advisor: Seiji, Yasunobu).

Syeda Najiha, Masood (2015) Performance investigation and multi-objective optimization of end milling of aluminium alloy 6061 T6 with coated and uncoated carbide tools under various cooling conditions. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Tawfiqullah, Ayoubi (2015) Stochastic modelling of time delay for solvent production by Clostridium Acetobutylicum P262. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Umi Kalsom, Masrom (2015) The effects of task complexity on the complexity of language production and task motivation in asynchronous computer-mediated communication (ACMC) environment. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Vidyadharan, Baiju (2015) Development of nanocomposite nanowires by electrospinning as a supercapacitor electrode with high energy density, power density and rate capability. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Muhammad Firdaus, Wan Sulaiman (2015) Analysis of sepic DC/DC converter using perturb & observe algorithm for photovoltaic charge controller. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daniyal, .Hamdan).

Wan Rusyaini, Wan Mohd (2015) Measuring laziness through self-regulation using heart rate variability (HRV) biofeedback. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Nubli, Abdul Wahab).

Wan Syahirah, Wan Samsudin (2015) Initial assessment of facial nerve paralysis based on motion analysis using optical flow method. PhD thesis, Universiti Malaysia Perlis (Contributors, UNSPECIFIED: UNSPECIFIED).

Wen Li, Lim (2015) Single-stage DNA splicing system via Yusof-Goode approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wong, Lo Ing (2015) Alternative method for economic dispatch utilizing grey wolf optimizer. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Herwan, Sulaiman).

Yogeswaran, Muthusamy (2015) Machinability of AISI304 stainless steel using Ethylene Glycol nano particles based coolant. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Yusra Yaseen, Lazim (2015) The influence of human resources management practices and governmental support on organizational performance in small manufacturing businesses in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zuraidah, Ali (2015) Recovery process of jacalin from crude protein of jackfruit seed powder : optimization of extraction and cytotoxicity study of jacalin towards human cancer cell. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

UMPSA News

Ruzinah, Isha (2015) Pelajar UMP menang anugerah emas thesis dalam sambutan Hari Air Sedunia 2015. UMP News .

Abdul Manap, Sulastri and Mohd. Azlan, Sayuti and Mohd. Norman, Nizam Mansor and Mohammad Firdaus, Rosli (2015) FTeK anjur pertandingan Robot LEGO pupuk minat pelajar sekolah. UMP News . (Unpublished)

Ahmad Ziad, Sulaiman (2015) FKKSA, Petronas LDPE kongsi kepakaran tangani letupan silo dan elektrostatik. UMP News . (Unpublished)

Fatmawati, Adam (2015) Mobiliti pelajar FKKSA timba ilmu ke Turki. UMP News . (Unpublished)

Ngahzaifa, Ab. Ghani (2015) UMP tuan rumah dua Persidangan Antarabangsa Sistem Komputer. UMP News . (Unpublished)

Nurhidayah, Azmy (2015) Program teknologi kejuruteraan (pengurusan infrastruktur) bakal diiktiraf antarabangsa. UMP News . (Unpublished)

Nurul Syuhaida, Mohd. Asri and Imaduddin, Abidin (2015) PBMSK laksana Program Transformasi Belia. UMP News . (Unpublished)

UMP, . (2015) Terowong angin pelbagai guna. Utusan Malaysia .

Wan Nazrul Helmy, Wan Mohd Zain (2015) In-Smartive UMP bentuk kepimpinan pengawas sekolah. UMP News . (Unpublished)

Undergraduates Project Papers

Abdul Rashid, Marjuki (2015) Qualitative assessment of structural strength for thermoformed honeycomb sandwiched structures. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Adam, Ismail (2015) The effectiveness of rectangular block as energy dissipation structure. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Adam Zakwan, Zainuddin (2015) Application of drone in visual inspection for construction project. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Afiq Hafizi, Azizi (2015) Photocatalytic seawater desalination: the effect of metal loading in the hybrid tio2 and the effect of wavelength. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Al Asfahan, Abdull Rahim (2015) Implementation of project monitoring and controlling in construction in Pahang. Faculty of Industrial Management, Universiti Malaysia Pahang.

Ahmad Amirul, Mohd Zaki (2015) Comparison of factor of safety using different method of analysis for slope stability. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Bukhari, Abdullah (2015) Breast cancer detector software (BCDS) using case-based reasoning. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Ahmad Muhddin Hidir, Othman (2015) Dual function mouse. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Ahmad Nazif Naim, Zali (2015) The use of eggshell as partial sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Salahuddin, Mat Hassan (2015) Study on adaptability culture and project performance in project-based companies. Faculty of Industrial Management, Universiti Malaysia Pahang.

Ahmad Shahroom, Mohd Shah (2015) Recycling of nickel oxide from palm oil mill fuel ash (POMFA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Syahmi Azri, Mohmad Anua (2015) Assessment of effect of flood mitigation construction at Perkampungan Sungai Isap, kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Wafiq Firdaus, Zulkifli (2015) Finite element analysis of steel arch frame using ANSYS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Zakwan, Zulkefly (2015) Analysis of under-deck cable stayed bridge and combined cable stayed bridge. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmed Ashraf, Zaki Mohd (2015) Palm kernel shell as partially replacement of fine aggregates in concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ain Art Atiqah, Selamat (2015) The effect of water content and nutrient on soil microbial behaviour. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ainaa Bisyarah, Mohd Yusoff (2015) The effect of palm oil fuel ash as partial cement replacement material on concrete toward heat generation. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ainaa Farhana, Rosli (2015) Acceptance of an innovation toward performance within construction industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Ainin Sofia, Azni (2015) Optimisation of phenolic compounds extraction from misai kucing using RSM. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ainur Nadhirah, Hamsan (2015) The investigation of fire growth pattern from different combustible materials. fFaculty of Engineering Technology, Universiti Malaysia Pahang.

Allyson, Hilbert (2015) Rainfall runoff simulation using modified SCS-CN and HEC-HMS model in Kuantan watershed. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amaran, Krishnamuthi (2015) Sediment transport modelling around bridge at Sungai Tuiusing 1D quasi unsteady flow HEC-RAS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amir Aizat, Jamil (2015) Rainfall runoff simulation using slop adjusted Curve number in Kuantan river basin. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amir Aliff, Amri (2015) Prediction of flood event by using artificial neural network at Padas River. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amir Saifuddin, Amram (2015) Soil properties comparison of lime treated soft clay. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amira Shafika, Ab Manaf (2015) The impact of human resource management practices on financial performance of Pasdec Corporation in Kuantan. Faculty of Industrial Management, Universiti Malaysia Pahang.

Andi Razif, Andi Rahim (2015) Kanban food ordering system. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Ang, Xiao Pei (2015) The challenges of managing stakeholders in multiple types of event management projects. Faculty of Industrial Management, Universiti Malaysia Pahang.

Ang, Yip Hong (2015) Analysis of squat shear wall with different dimensions and position of opening under different type of static loads. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Anis Amira, Abdul Karim (2015) Soil–water characterictic curve (SWCC) for FMC Kaolin. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Anis Izzati, Ab Fauzan (2015) Kids edutainment application: islamic pre-school syllabus (KEAIPS). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Aqwa, Nawi (2015) Biodiesel production from moringa oleifera seeds oil by using MgO as a catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Arsyad, Fitriyanti (2015) Evaluation of surface roughness and power consumption in machining FCD 450 using coated and uncoated irregular milling tools. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ashwinder, Chelliah (2015) Separation of essential oil from mixtures of melissa officinalis and cymbopogan citratus leaves for mosquito repellent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aui, Shwu Harn (2015) Particle size distribution measurement from different indoor activities. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Awis, Ibrahim (2015) A study on decision making in managing maintenance and building services in military organization. Faculty of Industrial Management, Universiti Malaysia Pahang.

Ayuni, Mohamad Ali (2015) Pretreatment of forestry residue via torrefaction process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azmira, Ab Aziz (2015) Comparisons between mix designs towards SF-OPSC mechanical properties. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Azyyati, Abd Hamid (2015) Ultrasonic extraction of palm pressed fibre for oil recovery. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ban Kiat, Tey (2015) Synthesis of reduced graphene oxide by using palm oil mill effluent (POME). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Candra, Menan Nagappan (2015) Finite element modelling analysis on built-up column. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Chan, Chia Jing (2015) Risk assesstment of noise exposure in wooden furniture manufacturing industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Chan, Sooi Tat (2015) Fuzzy logic controlled solar module for driving three-phase induction motor. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chang, Jian Fei (2015) Design and development of smart car parking system using arduino and android. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chang, Ling Shing (2015) Mobile patient appoinment and helping system for emergency. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Che Ku Mohd Shahidan, Che Ku Mohd Yusof (2015) The risk assessment of roof truss structure in Malaysia due to windstorm. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Che Muhammad Faris, Che Mohd Shamshudin (2015) Mechanical behavior of palm kernal shell concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Cheah, Kar Jun (2015) Study on the depth reduction of concrete beam using mega mesh polypropylene fibres under flexural load. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Chee Heng, Hor (2015) Effect of irradiation of ultraviolet on the quantitation method of enhanced green fluorescent protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chin, Pei Qi (2015) Image analysis of non aqueous phase liquid migration in aggregated kaolin. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Chin, Steny Loong (2015) Evalutaion of thunderstrom hazards within Peninsular Malaysia using geographical information system (GIS). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chong, Soo Ling (2015) Fabrication of glucose sensor using graphene. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chong, Wen Khai (2015) Experimental study on the behaviour of reinforced concrete deep beams with large circular openings strengthened using CFRP. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Chong, Yew Puay (2015) The influence of the big five personality traits in team selection for construction project. Faculty of Industrial Management, Universiti Malaysia Pahang.

Choong, Wai Kit (2015) Mechanical behaviour of concrete added with bamboo fibre. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Costello Fifo, Nyuwus (2015) A case study to investigate the wind load factor that possibly cause the failure of roof Stadium, Kuala Terengganu. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Debbie Cynthia, Clarence Botiti (2015) A study to investigate the cause of failure and collapse of UMNO Tower Penang. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Dhinesh, Ramotharan (2015) Unmanned aerial vehicle with night vision for tracking intruder. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Dominick, Gira (2015) Ethanol dry reforming over Ce-promoted NI/AI203 catalyst for H2. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dushendran, Bala Krisnain (2015) Analysis on the effect of different bracing types and layouts on lateral drift of 30-storey steel framed building subjected to lateral forces using ANSYS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Effa Syarmiza, Saharudin (2015) Finite element analysis on the flexural behaviour of internally pre-stressed i-beam. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Elizabeth, Hendroff (2015) Production of fuel grade bio oil and fuel gas from catalytic plastic pyrolysis : effect of temperature. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Elliza, Marcellus (2015) A study to investigate the cause of failure of pedestrian bridge Pasir Gudang, Johor. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ernie Zayani, Kamaruzaman (2015) Biological production of methanol by using pectin methylesterase (PME). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fan, Chin Yet (2015) Heat optimization in internal curing process of geopolymer mortar by using steel dust. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fang, Liew Siew (2015) Determination of optimum moisture content for aggregation of S300 kaolin. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Farah Fazira, Kamaruzaman (2015) Fabrication & properties of aluminium-silicon carbide (A1/SiC) composite material. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Farah Syahirah, Yahya (2015) Development of operator training simulator using aspen simulation workbook (ASW): a reactor case study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Farah Zafirah, Mod Ma'asum (2015) Effect of palm oil fuel ash pofa)with limestone as a partial cement replacement material towards compressive strength and corrosion resistance. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Farahani, Sarajuddin (2015) Hydrogen production via glycerol dry reforming over nickel catalyst supported on sio2 and Al2O3 modified by La. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatimah Hanim, Khairudin (2015) Study of reduce, reuse and recycle techniques in sustainable construction waste management. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fatin Ajeerah, Mad Din (2015) Influence of elevated temperature on physical properties and compressive strength of concrete containing laterite as partial fine aggregate replacement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fatin Nabilah, Mender (2015) Stabilizaton of clayey soil using polyethylene and polypropylene. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fatin Nadia, Pauzi (2015) Adsorption of methylene blue from aquoues solution by using imprata cylindrica waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Nur Amni, Aminuddin (2015) The effect of plywood thickness on profile steel sheeting dry board (PSSDB) floor panel with foam concrete in-fill. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fazerah, Moen (2015) Effect of rotation speed and temperature to wax deposition for Malaysian crude oil. Project Paper (Bachelors of Chemical Engineering) -- Universiti Malaysia Pahang – 2015, Universiti Malaysia Pahang.

Filzah ‪Lina, Mohd Safeiee (2015) Football speed analysis and game analysis by using image processing. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Fiona, Gasing (2015) Evaluation of wind hazard over Sabah And Sarawak. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fong Fong, Kiew (2015) Copper removal using ion exchanger flat sheet mixed matrix membrane : effect of polyethersulfone composition on membrane properties. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Gan, Gek Hian (2015) Performance analysis of a downdraft and fluidized bed biomass gasification using thermodynamic equilibrium model. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Goh, Chin Guan (2015) Design and implementation of an automatic coin sorting and counting machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Goh, Ghee Hau (2015) PSAT : a pairwise test data generation tool based on simulated annealing algorithm. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Hafizah Dalilah, Mohamad Zin (2015) An evaluation of hospitality industry's efficiency using data envelopment analysis (DEA). Faculty of Industrial Management, Universiti Malaysia Pahang.

Han Jie, Chan (2015) Synthesis and characterization of EFB clinker supported nickel and cobalt catalysts for methane dry reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hasmida, Noordin (2015) Analysis of hybrid arch and cable-stayed bridge. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Hasyima, Idris (2015) The impact on-the-job (OTJ) training towards employees performance in manufacturing company at Seremban, Negeri Sembilan. Faculty of Industrial Management, Universiti Malaysia Pahang.

Hazim Adly Harun, Harun (2015) Case study on delay factors in steel bridge construction. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hazimah, Abdul Rahim (2015) Modelling and simulation of flexible production line for coil winding assembly. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Hazrina, Abdul Halim (2015) Pretreatment of palm oil waste via torrefaction process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hie Lian, Hii (2015) Synthesis and charaterization of polyamide (PA) forward osmosis membrane. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hon Kit, Lee (2015) Molecular simulation studies of mea absorption process for CO2 capture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hong, Jia Hi (2015) Seismic response of 4-legged fixed offshore structure in Malaysia due to surrounding earthquake. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Hoo, Zi Hao (2015) Study on the concrete beam depth reduction using steel fibre under flexural load. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Izyan Shahirah Aimi, Shaharuddin (2015) Assessement variability of annual daily maximum rainfall of Pahang, Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Izzatulhanis, Rosli (2015) Adverse effect of anthropogenic activities on water quality of the Pekan River. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Jeevan Nair, Vasudevan (2015) Development of coating for formaldehyde scavengers in wood composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ji Siang, Tan (2015) Hydrogen production from CO2 reforming of methane over cobalt-based catalysts. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jiah Chee, Soh (2015) Green reduction of graphene oxide by using phtoextracts from banana peels. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kah Hoay, Tan (2015) Synthesis and characterisation of hydrophobic catalyst – Cs salt of 12-phosphotungstic acid functionalised dealuminated usy for the esterification of acrylic acid with butanol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kang, Kelvin Kai Wen (2015) Web based interactive multimedia courseware for history subject. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Kau Mun Kit, Joshua (2015) Hydrodynamic of two immiscilible liquid flow system : biodiesel synthesis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairil Anis, Suhaimi (2015) A study of quality of concrete at site construction and working culture during concreting. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Khairul Rizal, Suhaimi (2015) Strength performance of banana fiber ash mortar. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Kong, Zi Ling (2015) Enzymatic conversion of cassava starch to flour. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kuah, Yi Mei (2015) Flexural behaviour of polyethylene terephthalate (PET) fibre in concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Kwo Wei, Teh (2015) Study on the valorization of rice waste by using torrefaction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lau, Kun Lu (2015) Continuous transesterification for tubular reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lau Chin Yee, Cindy (2015) Reusability and leakage of immobilized laccase enzyme. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Law, Jessica Ka Ing (2015) Analysis and countermeasure to improve machine efficiency by using overall equipment effectiveness (OEE) method. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lawanya, K. Ramu (2015) Optimization of bioethanol production using oil palm frond juice. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lee, Cheng Yee (2015) Water desorption characteristic of red gypsum. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee, Jia Wei (2015) Finite element analysis of 3D transmission tower using ANSYS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee, Swet Jean (2015) A study of integration of risk management and value management in construction project. Faculty of Industrial Management, Universiti Malaysia Pahang.

Lee, Ti Soon (2015) Mana rehab : a game that helps in fine motor skills rehabilitation. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lee, Wai Yee (2015) Effects of human resource management (HRM) practices on project performance in construction industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Leong, Kah Seng (2015) Investigation on the undrained shear strength of soft clay mixed with various percentages of lime and 6 % of silica fume. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Leong, Meng Li (2015) A study of PM₂.₅ emitted from cooking activities in indoor environment. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Liang, Kai Jun (2015) FEM analysis (3D) of reinforced concrete beam with openings. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Liew, Pei Qi (2015) Sewerage inflow and infiltration in Universiti Malaysia Pahang (Gambang). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Liew, Pei Shan (2015) The study of soft factors in team selection for construction project. Faculty of Industrial Management, Universiti Malaysia Pahang.

Lim, Jia Jun (2015) Determination of earthquake design criteria for fixed offshore platform (four-legged) due to Aceh earthquake in Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lim, Say Choon (2015) Helper system for managing Alzheimer's people using mobile application. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lim, Syh Ho (2015) Study of silica gel as self-healing agent in ordinary portland cement (OPC) mortar exposed to extremely high temperatures. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ling, Michael Chee Siang (2015) Multi-users workstations. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Ling Wang Ming, Fiona (2015) Drag reduction in microfluidic. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Logapriya, Logamaintan (2015) Adsorption of natural dye on bamboo yarn. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Low, Wei Keat (2015) Study of silica gel as self-healing agent in geopolymer mortar exposed to extremely high temperature. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Low,, Yee Hwa (2015) Analysis of a 4-legged fixed offshore structure in Malaysia under seismic loading. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lydiaizna, Adam (2015) Adverse effect of poor waste water management practise on the Tunggak River Pahang, Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mardiah, Johari (2015) Student attendace for final examination system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Mariah, Che Mamat (2015) Development of natural product based flocculant agent to treat petroleum refinery industry wastewater. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mei Kei, Lai (2015) Characterization of cellulose tri acetate (CTA) forward osmosis membrane for nom removal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mimi Syahida, Muhamad (2015) The effect of palm oil fuel ash (POFA) as a partial cement replacement towards the formation of delayed ettringite formation (DEF) in concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohamad Adam, Hassan (2015) A case study of the improvement in batik production. Faculty of Industrial Management, Universiti Malaysia Pahang.

Mohamad Aidil, Abd Kassim (2015) Finite element analysis of a geodesic dome structure by using staadpro software. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohamad Aizuddin, Kamar (2015) The water resistance of interlocking block wall. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohamad Amirul, Anuar (2015) Biomethanation of sugarcane wastewater by ultrasonic membrane anaerobic system (UMAS). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Firdaus, Mohamad (2015) Smart homerity system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Mohamad Hafiz Zulkarnain, Azman (2015) Molecular simulation studies of 1, 6 hexamethylenediamine (HMDA) absorption process for co2 capture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Hazmi, Marinamarican (2015) The effect of eggshell powder on concrete brich performance as partial replacement of cement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohamad Hazni Aizal, Hamdan (2015) The contributing factors affects on special events and shopping venue. Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Mohamad Salihi, Ramli (2015) Microcrystalline cellulose from biomass-palm oil frond. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Syafiq, Othman (2015) Effect of alkaline solution on compressive strength of cement laterized cube with different soil grains size. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohamad Zuhairi, Zulkifli (2015) Performance of foamed concrete arch tile as permenent formwork for upper floor SLAB. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohammad Farhan, Abu Samah (2015) Study of concrete grade under stress using image provides by infrared thermography (IRT). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohammad Firdaus, Sahda (2015) Development of equilibrium model of vacuum distillation for benzene/toluene separation using mosaic software. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Hafizezazmi, Ajamain (2015) Pressure drop of different flow pattern in multiphase flow system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Hafizuddin, Mohd Yusoff (2015) Biomass thermal pre-treatment for co gasification: CO2 torrefaction. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Ikwan, Abdullah (2015) Job stress and project performance among construction company in Terengganu. Faculty of Industrial Management, Universiti Malaysia Pahang.

Mohammad Syafiq, Ideris (2015) Strength of kaolin stabilized with various percentage of lime and 4% silica fume. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Amizar, Abdul Majid (2015) Augmented reality for construction engineering field (ARG). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Mohd Faiz, Anwar (2015) Thunderstorm effect to building damages in peninsular Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Fauzan, Mohd Zain (2015) Superbike services management system (SSMS). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Mohd Hafizul Afiq, Su' Aif (2015) The relationship between customer service and the organizational performance. Faculty of Industrial Management, Universiti Malaysia Pahang.

Mohd Jozaimi Izwan, Jalaluddin (2015) Aquarium pump drive by solar cell using maximum power point tracking (MPPT). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Khairul Azam, Md Khairudin (2015) Finite element analysis of steel frame structure for food court using ANSYS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Syahiran, Yusuf (2015) Comparison study on the extraction of moringa oleifera seeds oil by soxhlet and microwave methods. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Syahmi Hafizi, Ghani (2015) Development of hot melt ethylene vinyl acetate (EVA) adhesive for packaging industry. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Taufiq, Hasabulah (2015) The mechanical property of palm oil fuel ash as partial cement replacement in cement brick. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Yusani, Ayub (2015) Event management system (EMS). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Muhaiza , Awang (2015) Building information modelling creating customized wall family liblary using revit 2014. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhamad Afiq, Mustafa (2015) Prediction of Temerloh River water level for prediction of flood using Artificial Neural Network (ANN) method. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhamad Afiq Naqiuddin, Kamarizan (2015) A signal processing of deep drilling process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Ariff Shazlan, Roslan (2015) Characterization of e-waste : rare earth element identification. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Azami Fitri, Ab Manan (2015) Android based dot-matrix led display scrolling text console. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Fadhil, Abdul Halim (2015) Factors that drive green building implementation and the cost impact of green building implementation. Faculty of Industrial Management, Universiti Malaysia Pahang.

Muhamad Hisyam, Zakaria (2015) Methane dry reforming over Ce-promoted Ni/Al2O3 catalyst : kinetic studies. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Khairul Naim, Saad (2015) Comparison of moringa oliefera seed oil characterization produced by chemical and mechanical method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Lukman Hakim, Wahab (2015) The use of banana trunks ash as cement replacement in mortar. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Adib, Embong (2015) Finite element analysis of 3D reinforced concrete frame using ANSYS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Aidil Azhar, Noor Azmi (2015) Mobile web to control farming system (MFS). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Muhammad Aizat , Abd Ghafar (2015) Mechanical properties of lighweight concrete arch pan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Amirudin, Shikh Ali (2015) Hydrology study and trend of rainfall event at UMP Gambang. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Asyraf , Zulkifli (2015) Thermal resistance of interlocking block wall with infill. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Audi Adib, Mohd Zim (2015) Soil stabilization using chemical additive. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Faiz, Ab. Rahim (2015) Remote temperature monitoring and analysis of thermoforming process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Fathi, Asrul (2015) Ceramic tiles waste as coarse aggregates partial replacement for concrete production. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Fathurrahman, Rizal (2015) 3D interactive courseware for education: anatomy of human brain. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Muhammad Fawwaz, Abdul Wahab (2015) Oil-in-water emulsion technique enhancement for viscous crude oil flow in pipelines. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Firdaus, Azmi (2015) Application of six sigma model in production and quality of the stabiliser. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Fizree , Ghazali (2015) Production and strenght of fiber reinforced arch pan as permenent formwork for floor slabs. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Hadi, Asmuni (2015) A study on communication among foreign worker at construction site. Faculty of Industrial Management, Universiti Malaysia Pahang.

Muhammad Hafezan, Omar (2015) Basic Quran learning applications for adult (IQRA'). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Muhammad Hashrul Tahpiz, Ibrahim (2015) Formulation, characterisation, and optimization of emulsion fuel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Iqbal Hisyam, Mohd Zahari (2015) Programming for reinforced concrete design for two-way restrained solid slab to eurocode 2. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Mu’izzuddin, Abd Malek (2015) Optimization of polyphenols encapsulation from Orthosiphon Stamineus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Nabil Fikry, Rohyzat (2015) UMP business application. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Muhammad Nasrullah, Rosli (2015) My tajwid mobile application. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Muhammad Ridhwan, Salman (2015) Estimation of solubility parameter using small and fedors method for ionic liquids. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Saiful Azreen, Ismail (2015) Corrosion inhibition of mild steel in hydrochloric acid solutions by the extract of nypa fruticans wurmb. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Syahredzuan, Rusli (2015) Effect of cement – aggregate ratio with an alkaline addition (NaOH) on the mechanical properties of compressed stabilised earth cubes. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Syaiful Safwan , Nordin (2015) Materials takeoff in building information modeling. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Syazuwan, Nordin (2015) A CFD simulation study on the effect of velocity and pressure distributions in wet gas metering using slotted orifice flow. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Zulhelmi, Mohd Fauzi (2015) UMP vehicle entry & exit monitoring system (UMP VEEMS). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Muna Shafawati, Yusoff (2015) Driving school learning (DSL). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Munita, Tan (2015) The role and impact of information technology towards the Unemployment rate of human resource management. Faculty of Industrial Management, Universiti Malaysia Pahang.

Nabilah, Mamat (2015) Study of rainfall-runoff relationship by using hydrologic modeling system (HEC-HMS) for Kuantan River Basin, Pahang. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nadia, Arib (2015) Exploration on drivers’ perception towards traffic inventory performance. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nadia Izaty, Baharuddin (2015) Communication tools and issues among the construction project team. Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Naim Shauqi , Mohd Noor (2015) The impact of watershed hydrology on landscape development. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Narayani, Kanesan (2015) Biology e-learning system (SPM student). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Natasha, Abdul Raoff (2015) Evaluating the efficiency of warehouse using data envelopment analysis (DEA). Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Nawawi, Osman (2015) The relationship of project management innovation and project performance in Kedah construction industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Nazariah, Abdullah (2015) Smart pigeonhole system by sending notification through short messagging system. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Nazratul Izzana, Ishak (2015) Study of deserted construction projects in Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nazrolnizah, Mohamad Noorzeli (2015) Pengukuran sifat bersungguh-sungguh untuk peserta program Amanah Ikhtiar Malaysia (AIM) menggunakan teknik biofeedback bagi usahawan wanita projek agropolitan Tanjung Batu, Pekan, Pahang. Centre For Modern Languages and Human Sciences, Universiti Malaysia Pahang.

Ng, Kin Mun (2015) Strengthening of reinforced concrete deep beams having large square openings in shear zone with carbon fiber reinforced polymer (CFRP) wrap. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ng, Weng Kai (2015) Mobile robot simulator with jmonkeyengine (java base programming). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ng, Zone Fhong (2015) Evaluation of different semivariogram models in groundwater quality mapping using GIS-based simple kriging at Khorasan Razavi-Iran. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nik Ruqiyah, Nik Hassan (2015) Preparation of thermoplastic container via thermoforming process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nonih, Gampuhur (2015) Contribution of steel fiber in a small scale reinforced concrete beam. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Noor Afiqah, Sharifmuddin (2015) Integrated glycerol processor and proton exchange membrane fuel cell (PEMFC) systems for stationary applications. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Ain , Mohd Nasir@Mazlan (2015) Assessment of rainfall distribution over peninsular Malaysia using satellite-based rainfall data. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Noor Amirah, Noor Shahrudeen (2015) Strength of soft clay reinforced with single crushed polypropylene (pp) column. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Noor Asikin, Ibrahim (2015) Extraction of thorns of ceiba petandra for phytochemicals studies. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Hafizatul Ashikin, Rozali (2015) To review the effectiveness of project management in construction process. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Noor Khairunnisa, Mat Yusof (2015) Invigilator system for UMP examination problem based on Faculty of Computer System & Software Engineering (FSKKP). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Noor Syahirah, Othman (2015) Synthesis and characterization of hypercrosslinked polymer : effect of reaction time. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noordiana, Ariffin (2015) Production of ethanol by immobilized saccharomyces cerevisiae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noorhaya, Kasa (2015) A study of optimum coconut shell (CS) ratio in cement sand bricks. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nor Ashifah, Hamzah (2015) Land use/land cover classification and change analysis by multitemporal remote sensing data. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Nor Asmaq, Baharom (2015) The effect of screw spacing on the Profiled Steel Sheet Dry Board (PSSDB) with foamed concrete infill floor panel stiffness. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nor Atikah, Mohd (2015) Characterization of polyvinylidene fluoride (PVDF) hollow fiber membrane on different lithium chloride (LICL) loading for carbon dioxide (CO2) removal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Faezah, Affri (2015) Effect of water to cement ratio to the mechanical properties of oil palm shell lightweight concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nor Farahiah, Ibrahim (2015) The effectiveness of the cylinder block on stilling basin as energy dissipation system. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nor Hazwani, Abdul Rahman (2015) Kid’s online typing game (cabaran keyboard). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Nor Hidayah, Azman (2015) Health risk assessment of linear alkylbenzene sulfonate among snow wash workers. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nor Hidayah, Muhamad Asri (2015) Impact of industrial effluents on water quality at the Tiram River, Kuantan Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nor Izatie, Mohamad Nadry (2015) Automated shopping list generator. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Nor Nadiah, Mohamad (2015) Isolation of lignin from oil palm empty fruit bunch (OPEFB) by using organosolv method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Shahroon, Hameed Sultan (2015) Esterification of highly acidified oil using waste cooking oil and ionic liquid supported by divinyl benzene as catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Syafizah, Mohd Sanusi (2015) Doa mobile application for autism children (e-DOA). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Noraini, Ghazali (2015) Transformation of carbamazepine dihydrate to anhydrous carbamazepine. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noramirah, Abdul Rahaman (2015) The problem of communication among stakeholder in construction project. Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Norashikin, Abd Razak (2015) Utilization of waste high density polyethylene (HDPE) as a course aggregate replacement with fly ash filler on hot mix asphalt. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Norashima, Nawir (2015) The nuisance from industrial activities in Gebeng, Kuantan (a case study in taman balok makmur). Faculty of Industrial Management, Universiti Malaysia Pahang.

Noratiqah, Chik (2015) Adhesion of bacterial on metal surfaces : effect of surface roughness. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norhamiza, Rossli (2015) Parking study at Klinik Kesihatan Bandar Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Norhidayah, Masstor (2015) Temperature alert alarm system (TAAS). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Norhisyam , Awang (2015) Factors affecting house purchase decision of middle class income in Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Norra Azlina, Rohmat (2015) Awareness of lean management in construction industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Norsyafiqah, Jamaluddin (2015) Mobile car alarm via bluetooth application. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Norul Nazifah, Yusuff (2015) Web based interactive family photo album (N-IFPA). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Nur Alia Adnin, Zainol Abidin (2015) Molecular simulation studies of AMP/MDEA absorption process for CO2 capture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Aliyana, Alihad (2015) The performance of palm coir pith for methylene blue dye removal in textile wastewater. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Amira, Ariffin (2015) Fingerprint database. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Nur Annissa, Najib (2015) Influence of stress towards employee’s performance in oil and gas industry at Kuala Lumpur. Faculty of Industrial Management, Universiti Malaysia Pahang.

Nur Aqilah, Jamaludin (2015) Organizational structure impacts on project performance among worker at oil and gas industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Nur Aqilah, Muhd Drus (2015) A study of the strength of soft clay in reinforced with group encapsulated bottom ash columns. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Ashida Ayu, Abdul Rani (2015) A study of assessor training strategies and its effect on accuracy, discriminant validity and interrater reliability in UMP. Faculty of Industrial Management, Universiti Malaysia Pahang.

Nur Ashikin, Jamin (2015) Rare earth identification from electronic waste : solid phase separation (acid leaching). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Asma', Suhaimee (2015) The development of intensity-duration-frequency curves for Pahang. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Athirah, Mohamad Khalil (2015) Equilibria of the triglycerides + faee + ethanol system and extraction of two immiscible liquid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Atiqah , Mohamad (2015) Synthesis and characterization of gel-type polymers via aqueous dispersion polymerization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Atirah, Abit (2015) A study of queuing time in waiting line of supermarket at cashier counter by using simulation. Faculty of Industrial Management, Universiti Malaysia Pahang.

Nur Ayna, Azmi (2015) The effect of palm oil fuel ash (POFA) with limestone as a partial cement replacement material toward concrete microstructure and hydration. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Azira Ayuni, Ab Aziz (2015) Assessment variability of annual daily maximum rainfall of Terengganu, Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Faizah, Yousof (2015) Physical properties, characterizations & solubility study between calcium sulphate and glutamic acid, n, n-diacetic acid, tetrasodium salt. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Farah Najwa, Mat Lazin (2015) Implementation of project crashing among contractors in Pahang. Faculty of Industrial Management, Universiti Malaysia Pahang.

Nur Farehah, Abdullah Anastas Zorin (2015) Assessment variability of annual daily maximum rainfall of Johor, Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Fatihah, Hanafi (2015) The extraction of asystasia gangetica using ethyl lactate solvent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Fatihah, Mohd Ghani (2015) Respiratory health among workers at bakery company. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nur Fatihah, Zakeri (2015) The causes and effect of delay to handover the project in construction industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Nur Fatin, Muhammad (2015) Screening of factors affecting the enzymatic hydrolysis of fiber pressed palm frond (FPOPF). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Fatin Nadiah, Fauzi (2015) Screening on the factor affecting the alkaline pretreatment of fiber pressed oil palm frond. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Hakam, Hakamazaman (2015) Soft soil stabilization using crushed glass and polypropylene. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Hashibah, Rozi (2015) Software courses in interactive Malaysia map for children (IMMFC). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Nur Irwani, Othman (2015) Study of mechanical behavior of steel fibre oil palm shell concrete (SF-OPSC). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Nadia Amira, Rosely (2015) Analysis of structure behaviour of domes. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Raudzah Fasahah, Abdul Wahab (2015) Study on sandy beach morphological changes during dry and wet season at Desaru, Johor. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Rukiah, Badaron (2015) Virtual education game for gncology children using mobile (VEGOC). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Nur Sabrina, Rahmat (2015) Preparation and characterization of photocatalyst for the conversion of co2 to methanol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Sarafina, Samsudin (2015) Biomethanation of sewage sludge by using ultrasonic membrane anaerobic system (UMAS) using sewage sludge as substrate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Shafikal, Zakaria (2015) Development of the rainfall runoff relationship for Kecau River by using HEC-HMS and it’s application to Tanum River. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Sharifah Ayu, Salim (2015) Study of rainfall-runoff relationship using hydrologic modeling system (HEC-HMS) for Lipis River. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Syafikah Nabilla, Zaharuddin (2015) Mobibike application for android. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Nur Syahirah, Mohd Shkuri (2015) Production of ferulic acid from banana stem waste by using co-culture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Syamimi, Azli (2015) Investigation of saw wood chips with different percentages in sand brick ratio 1:3. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nuradibah, Zainaludin (2015) Groundwater pumping simulation using hydrology apparatus. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurain Zahidah, Nazarudin (2015) Study of the strength of soft clay reinforced with single encapsulated bottom ash columns. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nuraini, Yusuf (2015) Strength of soft clay reinforced with group crushed polypropylene (PP) columns. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurashikin, Muhd Ramli (2015) Soil-water characteristic curve for SPV 200. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nuredah Aisyah, Nor Azman (2015) Bio-surfactant synthesis from waste cooking oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurhidayah, Mohd Zainal (2015) Enrichment of heavy metal and risk assessment in surface water of Tunggak River, Gebeng, Pahang. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurizzathanis, Mohamad Kusaseh (2015) Modeling and properties of glass fibre-reinforced nylon. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurmarsyita, Mohd Shah (2015) Measuring the performance of image data by using RLE algorithm in lossless compression technique. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurmazidah , Abdullah Zawawi (2015) Utilization of waste high density polyethylene (HDPE) as course aggregate replacement and glasses as filler in hot mix asphalt. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurshahira Saidatul Hasna , Abdul Jabar (2015) Case study on supply and demand for parking facilities at LYC Hypermarket (road Gambang-Kuantan). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurshamiera, Muhamad Fudzi (2015) Design of lightweight concrete arch tiles as permanent formwork for upper floor slab by using polystyrene beads. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nursofia, Mohd Yunus (2015) Carbon dioxide (CO2) dry reforming of glycerol for hydrogen production using Ni/La2O3 and Co/La2O3. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nursyafiqah, Jalaludin (2015) The effect of temperature on natural corrosion inhibition of carbon steel by using pineapple peels (ananascomosus l.) extract in acid sollution. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nursyazwani, Mat Lazim (2015) Effect of fiber hybridzation of the behaviour of oil palm shell concrete slab. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul 'Adilah, Rosnan (2015) Combination of mussel shell and potassium hydroxide as solid waste basic catalyst (SWBC) for fatty acid methyl ester (FAME) synthesis from castor oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Ain, Abd Rashid (2015) Determination of soil strength, settlement and chemical content of Bukit Ampang landfill. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Ain, Ibrahim (2015) Adsorption of betacyanin on yarns. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Aina, Husaini (2015) Study of the strength of soft clay reinforced with square and triangular encapsulated bottom ash column. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Amira, Ahmad Yusof (2015) Investigation on natural blue colorant of clitoria ternatea l. fabaceae (bunga telang): the effects of stabilizers to extracts. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Aqilah, Rahman (2015) An evaluation of resources efficiency in University Malaysia Pahang using data envelopment analysis (DEA) method. Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Nurul Arpah, Abd Malek (2015) Furfural separation from palm empty fruit bunch (pefb) using solid waste catalyst (SWC). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Athirah, Mohd Nasir (2015) Conflict and dispute reduction mechanism of procurement method for construction industry in Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Atikah, Adinnin (2015) Development of laboratory scale of palm oil mill effluent (POME) treatment plant by using Elaeis Guineensis biosorbent. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nurul Atikah, Azmi (2015) Effect of air speed on particle deposition rates in indoor building. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nurul Atikah, Mohd Rodzri (2015) Factorial screening of ferulic acid production from fiber pressed oil palm frond using mixed culture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Farhana, Ab Manaf (2015) Implementation of GIS techniques in mapping the characteristics of Temperah and Tui river’s catchment. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Farhana, Ahmad Tarmizi (2015) Public private partnership : challenges and success factor of PPP implementation in housing project in Kuala Lumpur. Faculty of Industrial Management, Universiti Malaysia Pahang.

Nurul Ika Amira, Zakaria (2015) Liquid detergent from palm oil and palm kernel oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Lyana, Al-Zahaba (2015) Study of infrared thermorgrapy in evaluate the characteristics of concrete grade based on thermal insulation. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Masliana, Khairil Anuar (2015) Efficiency of slow sand filter in purifying of tube well water in Kg. Fajar, Gambang, Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Murshida, Mohd Sabri (2015) Development of forecasting in Sungai Muda, Kuala Muda, Kedah by utilizing artificial neural network (ANN). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Nabila, Fazilan (2015) Seismic response of a typical 3-legged jacket of fixed offshore platform in Malaysia due to Aceh earthquake. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Naqiyaah, Omar (2015) English learning application for slow learner. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Nurul Norliana, Salahuddin (2015) A Study of women career in construction industry. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Syifaa’, Ramli (2015) Quality of work life impact to workers’ performance at Padiberas Nasional Berhad (BERNAS). Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Nurul Zafirah, Othman (2015) Impact of industrial effluent on water quality at the Belat River, Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul ellyanna , Kamaruddin (2015) Assessment impact of land use land cover changes the water yield. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurulsuriani, Awang (2015) Production of lactic acid using facultative anaerobic bacteria : Optimization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur’amirah, Abdul Ghafar (2015) Effect of organic and inorganic additives in membrane composition on the properties and performance of nanofiltration membrane for xylose and glucose separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nyap Xiang, Wong (2015) Synthesis and characterization of MgFe2O4 for photo-catalytic degradation of pre-treated pome. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ooi, Choon Kheng (2015) Development of a computerized inventory management system (IMS) for industry application. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ooi, Chun Shu (2015) Study on steel dust as filler material in cement based masonry. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ooi, Wei Jie (2015) Assessment of the potential natural ventilation on typical house in Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Pang, Zee Yee (2015) Effect of densified oil palm empty fruit bunch towards the torrefaction process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Pius Antonio , Ng Yew Shang (2015) Laboratory investigation on water quality and soil consolidation behaviour of soil- activated carbon mixture in riverbank filtration system. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Poon, Siew Voon (2015) Compressive behaviour of polyethylene terephthalate (PET) as partial coarse aggregate replacement in concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Rabiatul Arbiyah, Ruslan (2015) Calibrating a HEC-RAS model of V-Notch weir as inline structure using open channel flume flow method and its application for sediment transport. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Raja Abdul Aziz , Raja Mohamad (2015) The effect of crushed eggshell on concrete pavement block behaviour as a replacement of fine aggregate. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Raja Norhayati, Raja Sulaiman (2015) A study satisfaction about quality of taxi service in Kota Bharu, Kelantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Razlina, Mohamed (2015) Manpower needs in construction (foreign labour issues). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Rebecca, Stephen (2015) Treatment of industrial oleochemical wastewater by electrocoagulation method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rosezaimee, Abdullah @ Ismail (2015) The managerial perspective on influx of foreign workers in construction companies in Pahang. Faculty of Industrial Management, Universiti Malaysia Pahang.

Rosnani, Deraman (2015) Usage of foamed lightweight concrete arch tile as permanent formwork for upper floor slab. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Roziela, Hassan (2015) Delivery capabilities impact project performance. Faculty of Industrial Management, Universiti Malaysia Pahang.

Rushdan AmrI, Abdul Rashid (2015) UMP medical refrigerator alert system using sms notification. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Sak, Jenn Shin (2015) Night vision camera system for intruder detection in indoor and outdoor environment. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Salina, Ahmad Safii (2015) Extraction kinetics of fatty acids ethyl esters (FAEE) from oil phase using aqueous ethanol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sapiyah , Mohd Sukri (2015) Physical properties, characterization and interaction mechanism study between barium sulphate and diethylenetriaminepentaacetic acid pentapotassium salt. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Seow, Chun Mun (2015) Finite element analysis of RC deep beams with openings strengthened by carbon fiber reinforced polymer (CFRP). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Shim, Chee Wei (2015) Numerical analysis on the behaviour of cfrp shear- strengthened rc deep beams with large square and circular openings. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Sin Wan, Lum (2015) A study into photocatalytic degradation of methylene blue and glycerol aqueous solution over copper ferrite catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siow, Sin Yang (2015) Effect of opening with various size and location on RC deep beam. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Siti Aisyah, Saahri (2015) Design and fabrication of an automatic fish feeding system for home aquarium. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Farah Amirah, Ahmed (2015) Study effect of additive on PVDF membrane for CO2/N2 gas separation process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Farrah Nadzirah, Awaludin (2015) The compressive strength of lightweight concrete cube with recycled paper as aggregate replacement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Siti Fatimah, Mohamed Salleh (2015) Flexural behaviour of reinforced concrete beam using partial synthetic lightweight coarse aggregate (SYLCAG). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Siti Fatin Raihanah, Mohd Suhaimi (2015) Potential of oil palm leaves as an adsorbent for the removal of methylene blue from aqueous solution. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Fitriana, Alang Ahmat (2015) Modelling simultaneous nitritation and p-nitrophenol removal using aerobic granular biomass in a continuous airlift reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Haizan, Mohd Mukhtar Affandi (2015) Optimization of bleaching earth and extraction of free fatty acid (FFA) in palm oil refinery process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Hajar, Sulaiman (2015) Storing and query XML document using relation database. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Siti Irhith Bushrah, Noor Mahadi (2015) Palm oil-based polyol for coatings. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Maizatul Ashikin, Shah Bahrim (2015) Assessment variability of annual daily maximum rainfall of Kelantan, Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Siti Munirah, Kadir (2015) UMP library system (VB system). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Siti Nazriah, Hamdan (2015) Catalyst deactivation study of the esterification of dilute acrylic acid with different concentration catalyzed by ion exchange resin. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nor Fadhilah, Yasim (2015) Study on thermal decomposition and characterization of palm oil waste and forestry residues. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nur Amira, Hassan (2015) The performance of concrete using synthetic lightweight coarse aggregate (SYLCAG) on flexural behavior. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Siti Nur Ashikin, Abu Bakar (2015) Payment issues : The problems of Malaysian construction industry. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Siti Nur Fathiah, Adnan (2015) Mail management system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Siti Nur Haslizawati, Abdullah (2015) The critical success factor of entrepreneurs in information technology (IT) industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Siti Nurafiqah, Jaafar (2015) Text searching algorithm using boyer moore horspool (BMH) algorithm. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Siti Nurhafizah, Shaharuddin (2015) The impacts of performance related pay (PRP) towards the performance of SMEs workers in Alor Setar, Kedah. Faculty of Industrial Management, Universiti Malaysia Pahang.

Siti Nursuhana, Abu Bakar (2015) Utilization of waste high density polyethylene (HDPE) as coarse aggregate replacement and kaolin as filler in hot mix asphalt. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Nursyazwani, Kahapah (2015) Awareness of implementation building information modelling (BIM) in construction industries. Faculty of Industrial Management, Universiti Malaysia Pahang.

Siti Rohani , Mohamad (2015) The mode of choice for non-mandotary activities, case studies in Kota Bharu, Kelantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Sarah, Yahya (2015) Evaluating supplier performance using data envelopment analysis (DEA). Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Siti Zulaiha, Zainol (2015) Study of assesment of supply and demand of parking at Giant Hypermarket, Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Solihah, A. Aziz (2015) Seismic response of a typical 3-legged jacket of fixed offshore platform in Malaysia due to Philippines earthquake. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Su, Hui Min (2015) A study of risk management in it system towards a better performance in organization. Faculty of Industrial Management, Universiti Malaysia Pahang.

Suguna , Jeganathan (2015) Formulation of hair straightening cream from keratin protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Suhaila Hani, Abu Hamid (2015) A study on the potential of ex-mining lakes as alternative water sources. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Suzillco , Suki (2015) A study of the undrained shear strength of soft clay reinforced with 10mm and 16mm diameter single encapsulated bottom ash column. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Syamim Nadiah, Mohd Najib (2015) Adverse effect of anthropogenic activities on water quality of the Sungai Lembing. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Syarifah Aida Syafiqa, Sayed Azmi (2015) The effect of cockleshells on compressive strength of compressed sawdust concrete cube. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Syaza Nadia , Mohdin (2015) Assessment of the correlation between TMPA satellite-based and rain gauge rainfall. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Syaza Syafiqah, Muhamad Kamel (2015) Simulation study on forward osmosis desalination process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Syazwina Zafira, Zamanuddin (2015) Effect of soil suction on soil microbial activity. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Tai, Chan Kong (2015) Ethanol dry reforming for h2 production over lanthanide-group promoted Co/Al2O3 catalysts. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tan, Hock Hee (2015) Analysis of structural behaviour of 3D slender coupled shear wall with opening using ANSYS software. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Tan, Jo Ee (2015) Experimental modelling of floating debris boom. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Tan, Kean Wei (2015) A study of delay sources of construction project in Kuantan area. Faculty of Industrial Management, Universiti Malaysia Pahang.

Tan, Kee Kian (2015) PCB drilling using arduino. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Tan, Kim Guan (2015) The use of sewage sludge ash (SSA) as partial replacement of cement in concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Tan, Kit Oon (2015) Android mobile gripping robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Tan, Soon Teck (2015) Waste plastic bottle cap polypropylene (PP) as coarse aggregate replacement in concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Tan, Sze Yee (2015) Evaluative study of glycerol photocatalytic degradation over CuFe2O4 and La-CuFe2O4 photocatalysts. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tan, Yeong Yu (2015) The performance of closed loop steel fiber concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Tan, Yew Boon (2015) Electrical signal activity on upper limb muscle during mechanical load carrying : a study on emg-angle relationship. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Teck Huai, Ng (2015) Synthesis of bio-lubricant by esterification of pelargonic acid with 2-ethylhexanol over amberlyst 36. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Teh, Joe Ean (2015) Physicochemical characteristics of fine coarse particles in indoor building. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Tengku Muhammad Hasif, Tengku Mohamed Salim (2015) Finite element analysis of 3d steel jacket frame (offshore structure) using ANSYS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Thuraiya , Mohammad Thaim (2015) Study on the foaming tendency of ionic liquids of different anion and nmethyldiethanolamine (MDEA) for the removal of carbon dioxide. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ting, Li Chao (2015) Study on behaviour of concrete added with different length of bamboo fibres. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Toh, Shu Yuen (2015) T-way testing : a test case generator based on melody search algorithm. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Tong, Foo Sheng (2015) Shear strengthening of RC deep beams with large openings using carbon fiber reinforced polymers (CFRP). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Tsong, Jia Yan (2015) Noise exposure and stress responses in textile industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Umairah ‘Aqilah, Sudin (2015) The impact of benchmarking approach towards performance in construction industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Umi Nasrah, Mohamad Ismail (2015) Study of nitrogen containing compounds in a closed recirculating water of an aquaponic system growing tritcum aestivum (wheatgrass). Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Vignes, Rasiah (2015) Synthesis of iron based electrocatalyst for air-cathode mircrobial fuel cell (MFC). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wai Kean, Sin (2015) Molecular simulation studies of MDEA absorption process for CO2 capture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wai Mun, Low (2015) Process optimization for xylitol purification using liquid-liquid batch extraction : effect of volume ratios and number of stages. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Mohamad Aim Emirul Faiez, Wan Salleh (2015) The recruitment and effect to the project performance. Faculty of Industrial Management, Universiti Malaysia Pahang.

Wan Muhamad Syafiq , Wan Ismail (2015) Physical properties, characterization & interaction mechanism study between iron (II) sulphate (FeSO4) and glutamic acid, N,N-diacetic acid, tetrasodium (GLDA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Nur Hafieza, Wan Mat (2015) Shear performance of concrete slab with the addition of oil palm shell as lightweight concrete aggregate. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Wan Nurul Hafizah, Abd Razak (2015) Flood forecasting at Kinabatangan River, Sabah by utilizing artificial neural network (ann). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Wan Nurul Najihah, Wan Ghafar (2015) Effect of metal oxide nanoparticle on curing kinetic of bioresin. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Nurul Syahirah, Wan Lanang (2015) Surface EMG (Electrical Signal) based fatigue analysis during repetitive work. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Wei, Teo Kah (2015) Probabilistics finite element analysis of 3d portal frame using ANSYS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Wei Chun, Choo (2015) Production of biogas from poultry manure wastewater : optimization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wong, Choon Chen (2015) Implementation of assembly sequence by arduino and monitoring system using ni myrio. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Wong, Yih Kang (2015) Partial replacement of cement with sewage sludge ash (SSA) in mortar. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Wong Jing Zhi, Kelvin (2015) Effects of polyvinylpyrrolidone additive on the performance of hollow fiber ion exchanger mixed matrix membrane for copper removal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yana, Nuratri (2015) Assessing storage stability and mercury reduction of freeze-dried pseudomonas putida within different types of lyoprotectant. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yap, Hiew Thong (2015) Analysis of flow characteristics in sewerage systems. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Yap, Sin Wee (2015) Study of poly (ethylene-co-vinyl acetate) as a self healing agent in geopolymer with exposure to various curing temperature. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Yap, Yee Von (2015) Estimation and validation of wind speed by using spatial interpolation. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Yew, Yee Shien (2015) Heavy metal exposure assessment using nail as bio-indicator among the farmers in Malaysia. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Yu Xun, Teo (2015) Devolatilization studies of oil palm plantation residues via torrefaction process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yusrina, Mhamd Azizmy (2015) Landslide susceptibility mapping using logistic regression method and gis tool in Cameron Highlands. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Zhang, Kai Yuan (2015) Finite element analysis of box girder by using ANSYS software. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Zulfazli, Foazi (2015) Wet coconut fiber as an additive in concrete mixture. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Zuriyani, Zulkifli (2015) Investigation of saw wood dust with different percentages in sand brick ratio 1:3. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Other

Pejabat, Naib Canselor UMP (2015) Laporan Tahunan 2015 : Universiti Malaysia Pahang. Universiti Malaysia Pahang, Kuantan, Pahang.

This list was generated on Thu Mar 28 18:17:59 2024 +08.