Items where Year is 2016

Nor Azhar, Ahmad and Noor Azida, Sahabudin and Awanis, Romli, eds. (2016) Proceeding of International Competition and Exhibition on Computing Innovation 2016 (iCE-CInno 2016). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang. ISBN 978-967-2054-04-7

'Arifah Nadiah, Che Zainol Ariff (2016) Percutian santai di Pulau Perhentian. Wadah . p. 14. ISSN 2180-0456

A., Idris and Chua, Gek Kee and Mohamad Rizza, Othman (2016) Incorporating Potential Environmental Impact from Water for Injection in Environmental Assessment of Monoclonal Antibody Production. Chemical Engineering Research and Design, 109. pp. 430-442. ISSN 0263-8762. (Published)

A., Jamar and Z. A. A., Majid and Azmi, W. H. and M., Norhafana and A. A., Razak (2016) A Review of Water Heating System for Solar Energy Applications. International Communications in Heat and Mass Transfer, 76. pp. 178-187. ISSN 0735-1933. (Published)

A., Malik Hamat and M. F., Ghazali and Makeen, Mohd Amin and Fatihah, Adnan (2016) Irregularity Detection In Numerical Signal Using Time-Frequency Analysis. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3593-3597. ISSN 1819-6608. (Published)

A., Shah and S., Izman and Mas Ayu, Hassan (2016) Influence Of Nitrogen Flow Rate In Reducing Tin Microdroplets On Biomedical TI-13ZR-13NB Alloy. Jurnal Teknologi (Sciences and Engineering), 78 (5-10). pp. 6-10. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

A., Shah and Sudin, Izman and Mas Ayu, Hassan and Ramlee, Mustapha (2016) Optimization of Chemical Pretreatment for Removing Cobalt on Tungsten Carbide Substrate Using Response Surface Methodology. Jurnal Teknologi (Sciences and Engineering), 78 (5-10). pp. 24-32. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

A. A .M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat (2016) Development of Nanolubricant Automotive Air Conditioning (AAC) Test Rig. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8.. (Unpublished)

A. A., Mohammed and Bachtiar, Dandi and Siregar, J. P. and M. R. M., Rejab (2016) Effect of Sodium Hydroxide on The Tensile Properties of Sugar Palm Fibre Reinforced Thermoplastic Polyurethane Composites. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1765-1777. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. A., Razak and Z. A. A., Majid and Azmi, W. H. and M. H., Ruslan and Choobchian, Sh. and G., Najafi and K., Sopian (2016) Review on Matrix Thermal Absorber Designs for Solar Air Collector. Renewable and Sustainable Energy Reviews, 64. pp. 682-693. ISSN 1364-0321. (Published)

A. A. M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat (2016) Development of Nanorefrigerants for Various Types of Refrigerant based: A Comprehensive Review on Performance. International Communications in Heat and Mass Transfer, 76. pp. 285-293. ISSN 0735-1933. (Published)

A. F., Jusoh and M. R. M., Rejab and Siregar, J. P. and Bachtiar, Dandi (2016) Natural Fiber Reinforced Composites: A Review on Potential for Corrugated Core of Sandwich Structures. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00033). ISSN 2261-236X

A. G. N., Sofiah and Samykano, Mahendran and J., Rivas Murillo and Nurul Akmal, Che Lah and D., Ramasamy and K., Kadirgama and M. M., Rahman (2016) Effect of the length on the tensile deformation of nickel nanowires using molecular dynamics simulations. In: International Conference on Computational Science and Engineering 2016 , 28-30 November 2016 , The Magellan Sutera Resort, Kota Kinabalu. pp. 1-5., 4 (2).

A. K., Prasada Rao and Oh, Y. S. and Ain, W. Q. and Azhari, A. and Basri, S. and Kim, N. J. (2016) Al-TiH2 Composite Foams Magnesium Alloy. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-5., 114 (1). ISBN 1757-8981 (print); 1757-899X (online)

A. K., Prasada Rao and Shu Yin, Oh and M. K., Faisal and N. J., Kim (2016) Cladding of Mg Alloy with Zr Based BMG Alloy. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-4., 114.

A. K. M., Kafi and Nina Suhaity, Azmi and Mashitah, Mohd Yusoff (2016) Integration of horseradish peroxidase/carbon nanotube to construct a novel platform for direct electrochemistry of enxymes and biosensing applications. Abstract of Applied Sciences and Engineering, 11. ISSN 2415-2072. (Published)

A. K. M., Moshiul Alam (2016) Fabrication and characterization of modified multi walled carbon nanotube reinforced unsaturated polyester nanocomposites. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

A. N., Oumer and Abdulwehab A., Ibrahim and Nuruzzaman, D. M. and Khairi, Yusuf (2016) Simulation on Effect of Flow Induced Fiber Orientation on the Mechanical Properties of Fiber Reinforced Composites. ARPN Journal of Engineering and Applied Sciences, 11 (18). 10931 -10934. ISSN 1819-6608. (Published)

A. N., Oumer and N. T., Rao and F., Basrawi and Hassan, Ibrahim (2016) Numerical Simulation on Flow and Heat Transfer Characteristics of Supercritical Fluids in Mini-Channels. Journal of Advances in Technology and Engineering Research. pp. 1-5. ISSN 2414-4592. (Published)

A. R., Marjuki and Farah Amira, Mohd Ghazali and N. M., Ismail and S., Sulaiman and Ismail, Mohd Khairuddin and Anwar, P. P. Abdul Majeed and Abdul Aziz, Jaafar and F., Mustapha and Shahnor, Basri (2016) CAE Applications in a Thermoforming Mould Design. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-10., 114 (012012).

A. R., Yusoff (2016) Identifying Bifurcation Behavior during Machining Process for an Irregular Milling Tool Geometry. Measurement, 93. pp. 57-66. ISSN 0263-2241. (Published)

A. R., Yuvaraj and M. M., Yusoff and Lutfor, M. R. (2016) Synthesis of Bent-shaped Azobenzene Liquid Crystals Derived from Resorcinol for Optical Storage Properties. Molecular Crystals and Liquid Crystals, 631 (1). pp. 21-30. ISSN 1542-1406 (print); 1563-5287 (online). (Published)

A. R., Zulhishamuddin and S. N., Aqida and E. A., Rahim (2016) Optimization of Pulsed Nd:YAG Laser Melting of Gray Cast Iron At Different Spot Sizes for Enhanced Surface Properties. In: AIP Conference Proceedings: 19th International Esaform Conference On Material Forming (ESAFORM 2016) , 27–29 April 2016 , Nantes, France. pp. 1-6., 1769 (030004). ISBN 978-0-7354-1236-1

A. S. A., Sani and F. J. P., Sousa and Zamzuri, Hamedon and Azmir, Azhari (2016) Contact Pressure Distribution During the Polishing Process of Ceramic Tiles: A Laboratory Investigation. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-19., 114 (012008). ISSN 1757-8981 (Print), 1757-899X (Online)

Abayomi, Olalere Olusegun and Ruth, Alara Oluwaseun and Bala, Mohamed Saad and Twibi, Mohamed Farag (2016) A multi-criteria proximal bundle-based optimization approach to chick-mash feed formulation. Research & Reviews: Journal of Agriculture and Allied Sciences, 5 (1). pp. 1-8. ISSN 2347-226X. (Published)

Abbas, Ali A. and Sharifah Maszura, Syed Mohsin and Cotsovos, Demetrios M. (2016) A Simplified Finite Element Model for Assessing Steel Fibre Reinforced Concrete Structural Performance. Computers & Structures, 173. pp. 31-49. ISSN 0045-7949. (Published)

Abbas, Ali. M. H. and Ali, Jahan and Rahman, Md. Arafatur and Azad, Saiful (2016) Comparative Investigation on CSMA/CA-Based MAC protocols for Scalable Networks. In: 6th International Conference on Computer and Communication Engineering 2016 (ICCCE 2016) , 25-27 July 2016 , Kuala Lumpur, Malaysia. pp. 428-433..

Abbas Saliimi, Lokman and Ngahzaifa, Ab. Ghani and Lok, Leh Leong (2016) Simulating Dynamic Time Dilation in Relativistic Virtual Environment. International Journal of Computer Theory and Engineering, 8 (5). pp. 385-388. ISSN 1793-8201 . (Published)

Abd Hamid, Hazrulrizawati (2016) Production of aroma compounds by degradation of carotene from crude palm oil. , [Research Report: Research Report] (Unpublished)

Abd Hamid, Zahidy and Noor Azlinna, Azizan and Sorooshian, Shahryar (2016) Identification Analysis of Influencing Factors of Construction Business Success: A Case of the Malaysian Construction Industry. In: GRDS Conference Proceedings: 11th International Conference on Social Science and Humanities (ICSSH) , 19-20 September 2016 , London, England. pp. 1-20..

Abd Rahman, Safie (2016) UMP Annual Report 2016. Other. Penerbit Universiti Malaysia Pahang, Kuantan.

Abd. Aziz, Itar (2016) Kongsi kepakaran demi anak bangsa. Utusan Malaysia . p. 10.

Abdalla, Ahmed N. and Keream, Settar S. and Ibrahim, Thamir K. and Tao, Hai (2016) Adaptive Dynamic Inverse Controller for Advanced Coupled Tank Liquid Levels System. In: The 5th International Conference on Computer Science and Computational Mathematics (ICCSCM 2016) , 5-6 May 2016 , Langkawi, Malaysia. pp. 1-6..

Abdalla A. M., Ben Ali (2016) Investigation on asphaltene precipitation during carbon dioxide flooding for oil recovery. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zulkefli, Yaacob).

Abdelhakim, Deboucha (2016) A comprehensive analysis of surface electromyography for control of lower limb exoskeleton. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zahari, Taha).

Abdul Adam, Abdullah and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin and Mohd Herzwan, Hamzah and Mohd Fahmi, Othman (2016) Analysis of Combustion Characteristics and Emissions of Diesel Engine Fueled With Waste Source Fuel. In: 4th European Conference on Renewable Energy Systems (ECRES 2016) , 28-31 August 2016 , Istanbul, Turkey. pp. 1-6.. (Unpublished)

Abdul Aziz, Mohd Azoddein and F. A. M., Azli and A. B., Bustary and M. H., Sulaiman and A. Z. M., Salehen and Mazrul Nizam, Abu Seman and Said, N. and M., Sulaiman (2016) Characterization of Enzyme Produced from Pseudomonas Putida for BTX (Benzene, Toluene & Xylene) Treatment in Petrochemical Industry Wastewater System. International Journal of Research in Engineering and Science (IJRES), 4 (9). pp. 6-20. ISSN 2320-9364. (Published)

Abdul Aziz, Mohd Azoddein and Mani Malam, Ahmad and R. M., Yunus and Nik Meriam, Nik Sulaiman (2016) A Bioremediation Approach to Mercury Removal in a Shake Flask Culture Using Pseudomonas putida (ATCC 49128). Journal of Analytical & Bioanalytical Techniques, 7 (3). pp. 1-6. ISSN 2155-9872. (Published)

Abdul Hafaz, Ngah (2016) Barriers and enablers to the adoption of halal transportation and halal warehousing services among halal manufacturers in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zainuddin, Yuserrie).

Abdul Hafiz, Mohd Idzhan (2016) Water lever measure and control using ultrasonic sensor. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Abdul Nasir, Abd Ghafar (2016) Development and analysis of low-cost wearable servo valve using buckled tubes and embedded controller. PhD thesis, Okayama University of Science (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdul Qadir Jailani, Muchtar (2016) Modelling human queuing at Kuantan cinema. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and Imran, Anwar and Sharidan, Shafie (2016) Radiation Effect on MHD Stagnation-Point Flow of a Nanofluid over a Nonlinear Stretching Sheet with Convective Boundary Condition. Heat Transfer Research, 47 (9). pp. 797-816. ISSN 1064-2285(Print); 2162-6561(Online). (Published)

Abdul Razak, Raaff and Amin Ridzuan, Ishak (2016) 'Nostalgia penuh bermakna'. Berita Harian .

Abdul Razak, Raaff and Nik Sukry, Ramli and Amin Ridzuan, Ishak (2016) Kerajaan komited jaga rizab UNESCO. Berita Harian . p. 3.

Abdul Shukor Lim, Nor Hasanah and Samadi, Mostafa and Shafegat, Arezou and Nur Farhayu, Ariffin and Keyvanfar, Ali and Mohd. Sam, Abdul Rahman (2016) Effect of Homogenous Ceramic Waste on Drying Shrinkage of Mortar. Journal of Environmental Treatment Techniques , 4 (4). pp. 149-152. ISSN 2309-1185 . (Published)

Abdul Syukor, Abd Razak (2016) Memurnikan alam dengan pemulihan Phyto: suatu kajian konklusif. Penerbit UMP, Kuantan, Pahang. ISBN 9789670691671

Abdul Syukor, Abd Razak and Nur Azzimah, Zamri and Norbaizurah, Rahman and Suryati, Sulaiman and Munirah, T. K. and Shazarina, M. N. and Zularisam, A. W. and Edriyana, Abd Aziz and Suriayanti, N. M. Z. (2016) Assessment of Physico-Chemical Analysis of Ground Water Quality in Rural Area: Kampung Chendrawasih, Pekan Pahang for Drinking Purpose. In: Proceedings of International Conference on Knowledge Transfer (ICKT'15) , 1-3 December 2015 , Putrajaya Marriott Hotel, Malaysia. pp. 223-228.. ISBN 978-967-394-255-8

Abdul Syukor, Abd Razak and Suryati, Sulaiman (2016) Sistem wasra, pilihan untuk sumber air bersih di luar bandar - Kajian ke atas air bersih daripada sistem wasra untuk tujuan bersuci di masjid Universiti Malaysia Pahang (UMP). Penerbit UMP, Kuantan, Pahang. ISBN 9789672054122

Abdul Syukor, Abd Razak and Suryati, Sulaiman and Aimi Ilmar, Ramli and Khoo, Lai Peng (2016) Waste to wealth: oil palm mesocarp and empty fruit bunch mixture as a raw material of artificial bait to control subterranean termites. Penerbit UMP, Kuantan, Pahang. ISBN 9789672054115

Abdul Syukor, Abd Razak and Suryati, Sulaiman and Siddique, Md. Nurul Islam and Zularisam, A. W. and M. I. M., Said (2016) Integration of Phytogreen for Heavy Metal Removal from Wastewater. Journal of Cleaner Production, 112 (Prt. 4). pp. 3124-3131. ISSN 0959-6526 (print); 1879-1786 (online). (Published)

Abdulbari, Hayder A. (2016) Active drag reduction technique for enhancing the liquid-liquid mixing intensity in micromixers. , [Research Report: Research Report] (Unpublished)

Abdulbari, Hayder A. and Fiona Ling, Wang Ming (2016) Liquid Flow Enhancement using Natural Polymeric Additives: Effect of Concentration. In: 9th International Conference on Thermal Engineering: Theory and Application , 24-26 March 2016 , Abu Dhabi, UAE. pp. 1-3.. ISSN 1051-8215

Abdulbari, Hayder A. and Hassan D., Mahammed and Zulkefli, Yaacob and Wafaa, Kamil Mahmood (2016) Wall-Pressure Fluctuations of Modified Turbulent Boundary Layer with Riblets. International Journal of Mechanical & Mechatronics Engineering, 16 (1). pp. 23-34. ISSN 2077-124X (Online); 2227-2771 (Print). (Published)

Abdulbari, Hayder A. and Mahammed, Hassan D. and Zulkefli, Yaacob and Wafaa, Kamil Mahmood (2016) Wall Pressure Signatures of Turbulent Flow Over Longitudinal. In: MATEC Web of Conferences: International Conference on Measurement Instrumentation and Electronics (ICMIE 2016) , 6-8 June 2016 , Munich, Germany. pp. 1-5., 75 (01007). ISSN 2261-236X

Abdulbari, Hayder A. and R. M., Yunus and Charles, A. (2016) A Turbulence-Altering Pseudo-Surface for Enhancing the Flow in Pipes. Chemical Engineering Communications, 203 (2). pp. 278-286. ISSN 0098-6445. (Published)

Abdullah, Ali D. and Gisen, J. I. A. and Pieter, van der Zaag and Hubert H. G., Savenije and Usama F. A., Karim and Ilyas, Masih and Ioana, Popescu (2016) Predicting the Salt Water Intrusion in the Shatt al-Arab Estuary using an Analytical Approach. Hydrology and Earth System Sciences, 20 (10). pp. 4031-4042. ISSN 1027-5606. (Published)

Abdullah, Nasser and Hujainah, Fadhl and Alsewari, Abdulrahman A. and Kamal Z., Zamli (2016) A Unified Strategy for Sequence and Sequence-less T-way Test Suite Generation. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 72-79.. ISBN 978-967-2054-04-7

Abdullah, Nasser and Sariera, Yazan A. and Alsewari, Abdulrahman A. and Kamal Z., Zamli (2016) Assessing optimization based strategies for t-way test suite generation: The case for flower-based strategy. In: 5th IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2015) , 27-29 November 2015 , Penang, Malaysia. pp. 150-155.. ISBN 978-147998252-3

Abdullah Make, Muhammad Razif and M. F. F., Ab Rashid and Razali, Muhamad Magffierah (2016) A Review of Two-sided Assembly Line Balancing Problem. International Journal of Advanced Manufacturing Technology. pp. 1-21. ISSN 0268-3768 (Print), 1433-3015 (Online). (In Press / Online First) (In Press / Online First)

Abid, Hussanan and Khan, Ilyas and Hasmawani, Hashim and Muhammad Khairul Anuar, Mohamed and Nazila, Ishak and Norhafizah, Md Sarif and Mohd Zuki, Salleh (2016) Unsteady MHD Flow of Some Nanofluids Past an Accelerated Vertical Plate Embedded in a Porous Medium. Jurnal Teknologi (Sciences and Engineering), 78 (2). pp. 121-126. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Abid, Hussanan and Mohd Zuki, Salleh and Khan, Ilyas (2016) Effects of Newtonian Heating and Inclined Magnetic Field on Two Dimensional Flow of a Casson Fluid over a Stretching Sheet. In: Proceedings of 5th World Conference on Applied Sciences, Engineering and Technology (WCSET 2016) , 2-4 June 2016 , Ho Chi Minh City, Vietnam. pp. 251-255.. ISBN 978-81-930222-2-1

Abid, Hussanan and Mohd Zuki, Salleh and Khan, Ilyas and Razman, Mat Tahar (2016) Heat and Mass Transfer in a Micropolar Fluid with Newtonian Heating: An Exact Analysis. Neural Computing and Applications. pp. 1-9. ISSN 0941-0643. (Published)

Abid, Hussanan and Mohd Zuki, Salleh and Khan, Ilyas and Razman, Mat Tahar (2016) Unsteady Heat Transfer Flow of a Casson Fluid with Newtonian Heating and Thermal Radiation. Jurnal Teknologi (Sciences and Engineering), 78 (4-4). pp. 1-7. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Abid, Hussanan and Mohd Zuki, Salleh and Khan, Ilyas and Sharidan, Shafie (2016) Analytical Solution for Suction and Injection Flow of a Viscoplastic Casson Fluid Past a Stretching Surface in the Presence of viscous dissipation. Neural Computing and Applications, 2016. pp. 1-9. ISSN 0941-0643. (Published)

Abu, Taher and Lee, Dong-Jin and Lee, Ik-Mo and Lutfor, M. R. and Sarkar, Shaheen M. (2016) A Novel Graphene-Supported Palladium Catalyst for Suzuki–Miyaura Coupling of Less Reactive Heteroaryl Halides in Water. Bulletin of The Korean Chemical Society, 37 (9). pp. 1478-1485. ISSN 1229-5949. (Published)

Achmad, Hendriyawan and Mohd Razali, Daud and Saifudin, Razali and Pebrianti, Dwi (2016) A ROS‐based human‐robot interaction for indoor exploration and mapping. International Journal of Advanced and Applied Sciences, 3 (4). pp. 88-92. ISSN 0973-4562 (Print); 0973-9769 (Online). (Published)

Achmad, M. S. Hendriyawan and Findari, Widya Setia and Nurnajmin Qasrina, Ann and Pebrianti, Dwi and Mohd Razali, Daud (2016) Stereo Camera - Based 3D Object Reconstruction Utilizing Semi-Global Matching Algorithm. In: International Conference on Science and Technology-Computer (ICST) , 27-28 October 2016 , Yogyakarta, Indonesia. pp. 1-6.. ISBN 978-1-5090-4357-6

Achmad, M. S. Hendriyawan and Priyandoko, Gigih and Mohd Razali, Daud and Hamzah, Ahmad (2016) Human-Robot Interaction for Remote Application. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 224-230.. ISBN 978-967-2054-04-7

Adam, A. Y. and Oumer, A. N. and Azri, Alias and M., Ishak (2016) Effect of vortex generator on the air-side thermal-hydraulic performance of flat tube heat exchangers. In: National Conference for Postgraduate Research (NCON-PGR) , 24-25 September 2016 , Universiti Malaysia Pahang, Malaysia. pp. 1-8.. (Unpublished)

Adam, Fatmawati and Abu Seman, M. N. and Chik, Syed M.Saufi Tuan and Tajuddin, Saiful Nizam (2016) Molecular sieve application in the recovery of Gaharu active marker compound from water mixture. , [Research Report: Research Report] (Unpublished)

Afikah, Abd Rahman @ Othman (2016) The relationship between motivations factors and online shopping participation among student in University Malaysia Pahang. Faculty of Industrial Management, Universiti Malaysia Pahang.

Afzam, Zulkepli and Hassan, Ibrahim and Azri, Alias and F., Basrawi (2016) Review on the Recent Developments of Photovoltaic Thermal (PV/T) and Proton Exchange Membrane Fuel Cell (PEMFC) Based Hybrid System. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-8., 74 (00019). ISSN 2261-236X

Afzam, Zulkepli and Lim, Wei Yong and Mohd Yusof, Taib and Zafri, Azran and F., Basrawi (2016) Analysis on the Performance of Copper Indium Gallium Selenide (CIGS) Based Photovoltaic Thermal. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-5., 38 (02004). ISSN 2261-236X

Agarwal, Shilpi and Sadegh, Hamidreza and Monajjemi, Majid and Hamdy, Abdel Salam and Ali, Gomaa A. M. and Memar, Amir O. H. and Shahryari-ghoshekandi, Ramin and Tyagi, Inderjeet and Gupta, Vinod Kumar (2016) Efficient Removal of Toxic Bromothymol Blue and Methylene Blue from Wastewater by Polyvinyl Alcohol. Journal of Molecular Liquids, 218. pp. 191-197. ISSN 0167-7322. (Published)

Aghelie, Amir and Sorooshian, Shahryar and Noor Azlinna, Azizan (2016) Mathematical Modeling of Interrelationship Analysis to Determine Multi-Criteria Decision Making Casual Relations. Journal of Advanced Research Design, 20 (1). pp. 18-33. ISSN 2289-7984. (Published)

Ahamed, J. U. and Raiyan, M. F. and Hossain, MD. S. and M. M., Rahman and Salam, B. (2016) Production Of Biogas From Anaerobic Digestion Of Poultry Droppings And Domestic Waste Using Catalytic Effect Of Silica Gel. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 2180-1606. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahamed, N. U. and Zahari, Taha and Ismail, Mohd Khairuddin and Rabbi, M. F. and Rahaman, S. A. M. Matiur and Sundaraj, Kenneth (2016) Fuzzy Logic Controller Design for Intelligent Air-Conditioning System. In: IEEE 2nd International Conference on Control Science and Systems Engineering (ICCSSE 2016) , 27-29 July 2016 , Singapore. pp. 232-236.. ISBN 978-1-4673-9872-5

Ahamed, Nizam Uddin and Alqahtani, Mahdi and Rahman, Matiur (2016) Age-related EMG responses of the biceps brachii muscle of young adults. Biomedical Research (India), 27 (3). pp. 787-793. ISSN 0970-938X. (Published)

Ahamed, Nizam Uddin and Zahari, Taha and Sundaraj, Kenneth (2016) Age Related Differences in the Surface EMG Signals on Adolescent's Muscle during Contraction. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-6., 114 (012131). ISSN 1757-8981 (Print); 1757-899X (Online)

Ahamed, Nizam Uddin and Zulkifli, Md. Yusof and Zamzuri, Hamedon and Rabbi, M. F. and Tasriva, Sikandar and Palaniappan, Rajkumar and Ali, Md. Asraf and Rahman, S. A. M. Matiur and Sundaraj, Kenneth (2016) Fuzzy Logic Controller Design for Intelligent Drilling System. In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2016) , 22 October 2016 , Shah Alam, Malaysia. pp. 208-213.. ISBN 978-1-5090-4186-2 (In Press / Online First)

Ahmad, Asraf and Sorooshian, Shahryar and Cheng, Jack Kie (2016) Formulation of Logit Regression. Journal of Advanced Research Design, 21 (1). pp. 6-9. ISSN 2289-7984. (Published)

Ahmad, Mani Malam and Abdul Aziz, Mohd Azoddein and Mior Ahmad Khushairi, Mohd Zahari and Mazrul Nizam, Abu Seman (2016) Application Of Factorial Design To The Stress Phenomenon Of Bacillus Cereus (Atcc 14579) Growth. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 148-156. ISSN 1991-8178. (Published)

Ahmad, Mani Malam and Abdul Aziz, Mohd Azoddein and Mior Ahmad Khushairi, Mohd Zahari and Mazrul Nizam, Abu Seman and Mohammad Saedi, Jami and Faten Ahada, Mohd Azli (2016) Assessment of Sulfide Concentration Effects in a Micro-Oxygenated Condition on the Growth and Removal by Pseudomonas putida (ATCC 49128). Journal of Advanced Research in Materials Science, 27 (1). pp. 1-10. ISSN 2289-7992. (Published)

Ahmad, Redza and Toshiki, Kondo and Toshiaki, Yasui and Masahiro, Fukumoto (2016) High Anatase Rate Titanium Dioxide Coating Deposition by Low Power Microwave Plasma Spray. IOP Conference Series: Materials Science and Engineering, 114 (012031). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Ahmad, Redza and Yasui, Toshiaki and Fukumoto, Masahiro (2016) Deposition of Hard Chrome Coating onto Heat Susceptible Substrates by Low Power Microwave Plasma Spray. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-10., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Ahmad Amirul Faiz, Ahmad Tajudin (2016) CERRM shared its expertise on bauxite mining. Pekan Review, 11 . p. 36.

Ahmad Amirul Faiz, Ahmad Tajudin (2016) Kerjasama erat UMP dan Yamaguchi University. UMP News . (Unpublished)

Ahmad Azwan, Abdul Razak (2016) Solution for instability in magnetizing of toroidial coil winding. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Azzreen, Dalawi and Fahmi, Samsuri (2016) Low-Power Active RFID System Using nRF24L01. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 413-420..

Ahmad Badruzzaman, Idris (2016) 86 pelajar SMK Ahmad sertai In-Team. CREATE . p. 80. ISSN 1823-7487

Ahmad Badruzzaman, Idris (2016) Modul Bahasa Inggeris berkonsepkan Fun Learning tingkat kemahiran pelajar sekolah. CREATE . p. 72. ISSN 1823-7487

Ahmad Badruzzaman, Idris and Nur ‘Aisyatul Sakinah, Baharudin (2016) 85 pemimpin pelajar sekolah timba pengalaman. UMP News . (Unpublished)

Ahmad Badruzzaman, Idris and Nur ‘Aisyatul Sakinah, Baharudin (2016) Khidmat UMP bersama pelajar SMK Ahmad. UMP News . (Unpublished)

Ahmad Badruzzaman, Idris and Nur ‘Aisyatul Sakinah, Baharudin (2016) Mahasiswa UMP jalin perkongsian pintar dengan pelajar SK LKTP Jengka 5. UMP News . (Unpublished)

Ahmad Badruzzaman, Idris and Nur ‘Aisyatul Sakinah, Baharudin and Nur Amani Husna, Chai Lom and Rifaie, Mohamed (2016) Mahasiswa jalin perkongsian pintar dengan pelajar SK LKTP Jengka 5. CREATE . p. 73. ISSN 1823-7487

Ahmad Faiz, Ghani (2016) Wireless power transfer with multilevel output voltages. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Ahmad Farhan, Ahmad Nazri (2016) Pedestrian perception towards signalized crossing. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Huzaimi, Abd Jamil and Mohamad Syazli, Fathi (2016) The Integration of Lean Construction and Sustainable Construction: A Stakeholder Perspective in Analyzing Sustainable Lean Construction Strategies in Malaysia. Procedia Computer Science, 100. pp. 634-643. ISSN 1877-0509. (Published)

Ahmad Irfan, Ikmal Hisham (2016) Analisis Tematik Kalimah Al-Hilāl Di Dalam Al-Kutub Al-Sittah. In: Takwim Hijri: Isu & Pengurusan. Centre For Islamic Development Management Studies (ISDEV), Universiti Sains Malaysia, Pulau Pinang, pp. 61-74. ISBN 978-967-394-262-6

Ahmad Irfan, Ikmal Hisham (2016) Fenomena alam dari perspektif ilmiah, agama. Berita Harian .

Ahmad Irfan, Ikmal Hisham (2016) Fiqh Kosmos: Hubungan Jasad Samawi Dengan ‘Ibadah. In: Konvensyen Fiqh Dan Teknologi UMP 2016 , 03-04 September 2016 , Kuantan, Pahang. pp. 1-13..

Ahmad Irfan, Ikmal Hisham (2016) Istiwa' A'zam Menurut Perspektif Fiqh Kosmos. [Video]

Ahmad Irfan, Ikmal Hisham (2016) Pemeliharaan Alam Sekitar Menurut al-Quran dan al-Hadith. [Video]

Ahmad Lutfi, Mohd Yusof (2016) Seismic performance of cantilever retaining wall structure under earthquake loading. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Nazif, Noor Kamar and Suziyana, Mat Dahan and Nurirafarina Hanim, Abu Bakar and Ali, A. J. Adham and Sorooshian, Shahryar (2016) Improving Productivity by Simulate Facility Layout: A Case Study in a Car Component Manufacturer. International Journal of Industrial Management (IJIM), 2. pp. 72-80. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Ahmad Nazirul Ariff, A. Majid (2016) Implementation of android versatile drive interface in a vehicle model. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Nor Kasruddin, Nasir and Raja Mohd Taufika, Raja Ismail and Tokhi, M. O. (2016) Adaptive Spiral Dynamics Metaheuristic Algorithm for Global Optimisation with Application to Modelling of a Flexible System. Applied Mathematical Modelling, 40 (9-10). pp. 5442-5461. ISSN 0307-904X. (Published)

Ahmad Qushairi, Mohamad and Khan, Ilyas and Nor Athirah, Mohd Zin and Zulkhibri, Ismail and Sharidan, Shafie (2016) Effect of Ramped Wall Temperature on Unsteady Mixed Convection Flow of Rotating Second Grade Fluid in Porous Medium. In: Proceedings of the 6th IGCESH2016: International Graduate Conference on Engineering, Science and Humanities , 15-17 August 2016 , Universiti Teknologi Malaysia, Johor. pp. 415-417.. ISBN 978-967-0194-67-7

Ahmad Qushairi, Mohamad and Khan, Ilyas and Zulkhibri, Ismail and Nor Athirah, Mohd Zin and Sharidan, Shafie (2016) Heat Transfer On Mixed Convection Flow Of Rotating Second Grade Fluid With Ramped Wall Temperature. In: AIP Conference Proceedings: Proceedings of the 2nd International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA2016) , 10-12 August 2016 , Songkhla, Thailand. pp. 1-7., 1775 (030013). ISBN 978-0-7354-1433-4

Ahmad Rabiul, Zulkifli (2016) Eksport ikan laga. Harian Metro . p. 7.

Ahmad Redza, Ahmad Mokhtar (2016) Study on operational characteristics of low power atmospheric pressure microwave plasma spray method. PhD thesis, Toyohashi University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Saifuddin, Othman (2016) Prediction of future climate trend using stochastic weather generator. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Salihin, Samsudin and M. I. N., Isa (2016) Conductivity study on plasticized solid bioelectrolytes cmc-nh¬4br and application in solid-state proton batteries. Jurnal Teknologi (Sciences and Engineering), 78 (6-5). pp. 43-48. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Ahmad Syahiman, Mohd Shah (2016) Full-mode control in utilizing stored energy in lithium-ion batteries based on forecasted PV output implemented for HEMS. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Zakki, Jilan (2016) 4 perkara jadikan negara lebih cemerlang. Utusan Malaysia .

Ahmad Zakki, Jilan (2016) Fun Run sempena Ekspokonvo UMP meriah. Utusan Malaysia . p. 13.

Ahmad Zakki, Jilan (2016) Golf amal. Mingguan Malaysia . p. 2.

Ahmad Zakki, Jilan (2016) Pemenang larian 'Fun Run' UMP-Utusan. Utusan Malaysia . p. 2.

Ahmad Zakki, Jilan (2016) Tengku Abdullah, MB Pahang berbuka puasa bersama 4,000 warga UMP. Utusan Malaysia . p. 22.

Ahmad Zakki, Jilan (2016) Zakat. Utusan Malaysia . p. 2.

Ahmad Ziad, Sulaiman (2016) Pengekstrakan Herba Mudah-Alih melalui Teknik Enzim dan Ultrasonik Jana Geran RM 3 Juta. CREATE . p. 61. ISSN 1823-7487

Ahmed, AL-Saffar and Bilal, Sabri and Hai, Tao and Suryanti, Awang and Mazlina, Abdul Majid and Wafaa, ALSaiagh (2016) Sentiment Analysis in Arabic Social Media Using Association Rule Mining. Journal of Engineering and Applied Sciences, 11 (14). pp. 3239-3247. ISSN 1816-949x (Print); 1818-7803 (Online). (Published)

Ahmed, Abdulghani Ali and Nurul Amirah, Abdullah (2016) Real time detection of phishing websites. In: 7th IEEE Annual Information Technology, Electronics and Mobile Communication Conference, IEEE IEMCON 2016 , 13 - 15 October 2016 , Universtiy of British Columbia, Vancouver, Canada. pp. 1-6. (7746247). ISBN 9781509009961

Ahmed, Abdulghani Ali and Sadiq, Ali Safa and Mohamad Fadli, Zolkipli (2016) Traceback Model for Identifying Sources of Distributed Attacks in Real Time. Security and Communication Networks, 9 (13). pp. 2173-2185. ISSN 1939-0122. (Published)

Ahmed, Bestoun S. and Sahib, Mouayad A. and Gambardella, Luca M. and Afzal, Wasif and Kamal Z., Zamli (2016) Optimum Design of PIλDμ Controller for an Automatic Voltage Regulator System Using Combinatorial Test Design. PlosOne, 11 (11). pp. 1-20. ISSN 1932-6203 . (Published)

Ahmed, Hussam Alddin Shihab and Mohamad Fadli, Zolkipli (2016) Data Security Issues In Cloud Computing: Review. International Journal of Software Engineering & Computer Sciences (IJSECS), 2. pp. 58-65. ISSN 2289-8522. (Published)

Ahmed Yousif Adam, Mohammed and A. N., Oumer and Azri, Alias and M., Ishak (2016) Effect of Vortex Generator on the Air-Side Thermal-Hydraulic Performance of Flat Tube Heat Exchangers. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 582-590..

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and A. N., Oumer (2016) Air Distributor Designs for Fluidized Bed Combustors: A Review. Engineering, Technology & Applied Science Research, 6 (3). pp. 1029-1034. ISSN 1792-8036. (Published)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and A. N., Oumer (2016) Improvement On Particulate Mixing Through Inclined Slotted Swirling Distributor In A Fluidized Bed: An Experimental Study. Advanced Powder Technology, 27 (5). pp. 2102-2111. ISSN 0921-8831. (Published)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2016) Characterization and Development of Geldart’s Fluidizing Velocity Profile of Sand Particles for the Application in Fluidized Bed Combustor (FBC). In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2014). Springer, Singapore, pp. 147-156. ISBN 978-981-10-0532-9 (Print); 978-981-10-0534-3 (Online)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) A Hybrid Fuzzy Model for Lean Product Development Performance Measurement. IOP Conference Series: Materials Science and Engineering, 114 (1). 012048. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) An Improved Methodology for Multi-Criteria Evaluations in the Shipping Industry. Brodogradnja/Shipbuilding, 67 (3). pp. 59-72. ISSN 0007-215X (Print); 1845-5859 (Online). (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) An Interval Fuzzy-Valued M-TOPSIS Model for Design Concept Selection. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 374-384..

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) Intuitionistic Fuzzy-based Model for Failure Detection. SpringerPlus, 5 (1938). pp. 1-15. ISSN 2193-1801. (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) Proposal for a Conceptual Model for Evaluating Lean Product Development Performance: A Study of LPD Enablers in Manufacturing Companies. IOP Conference Series: Materials Science and Engineering, 114 (1). 012047. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Aiman, Mohd Halil (2016) Ohmic contact formation of gallium nitride and electrical properties improvement. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aiman Syakir, Sobki (2016) Hand detection for computer graphical user interface control. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Aimi Fatimah, Abd Malek (2016) 30 mahasiswa T-REX sampai ke kemuncak Gunung Liang. CREATE . p. 88. ISSN 1823-7487

Aimi Fatimah, Abd Malek (2016) 30 mahasiswa UMP sampai ke kemuncak Gunung Liang. UMP News . (Unpublished)

Ain Rashida, Abdullah (2016) Application of planning software in construction industries : study on effectiveness of planning software toward project planning. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ainaa Nabila, Md Abd Aziz (2016) The earthquake effect of double storey RC building due to surrounding earthquake in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ainal Marhaton, Abd Ghani (2016) 73 kali masuk ICU. Harian Metro . p. 8.

Ainal Marhaton, Abd Ghani (2016) Empower Boot Camp lahir pelajar lebih berdaya saing. Berita Harian . p. 7.

Ainal Marhaton, Abd Ghani (2016) Promosi sambil mengurut. Harian Metro . p. 3.

Ainal Marhaton, Abd Ghani (2016) UMP komited lahir graduan holistik. Berita Harian .

Ainal Marhaton, Abd Ghani (2016) UMP tak sekat. Harian Metro . p. 21.

Aini, Ahmad and Hasan, Ahmad (2016) A Review of Learning Organization Concept from Islamic Perspectives. International Journal of Humanities Technology and Civilization (IJHTC), 1. pp. 45-55. ISSN 2289-7216. (Published)

Aini Norhidayah, Mohamed (2016) Characterizing and isolating protein marker in authenticating eurycoma longifolia herbal products. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ainizar, Mustapa and Zuwairie, Ibrahim and Zulkifli, Md. Yusof and Ismail, Ibrahim (2016) Global Optimum Distance Evaluated Particle Swarm Optimization for Combinatorial Optimization Problem. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 943-950..

Aireen Mak, Siew Fern and Hasnah, Haron and Ishak, Ismail and Yuvaraj, Ganesan and Fathyah, Hashim (2016) Assessment on Internal Audit Capability Level in a Public Sector Organisation Case Study on a Local Government. Jurnal Pengauditan Sektor Awam, 1. pp. 1-21. ISSN 2180-2955. (Published)

Airinah Nazli, Aziz (2016) A study on ethics practices of construction industry in Wilayah Persekutuan. Faculty of Industrial Management, Universiti Malaysia Pahang.

Aishah, Safi and Shahrani, Anuar and D. M. N., D. Idris and Ahmmad Shukrie, Md Yudin and F., Basrawi and Mohd, Nazani (2016) Modelling flood reservoir integrated with pumped hydropower storage for electricity production using HOMER. In: Symposium on Energy Systems 2016 (SES 2016) , 21 September 2016 , Pekan, Pahang. pp. 1-7.. (Unpublished)

Aishah, Safi and Shahrani, Anuar and D. M. N., D. Idris and F., Basrawi and Ahmmad Shukrie, Md Yudin and Mohd, Nazani (2016) Feasibility of Pumped Hydro Storage for Energy Production and Flood Mitigation in Pekan. International Journal of Advanced and Applied Sciences, 3 (5). pp. 39-43. ISSN 0973-4562(print); 0973-9769(online). (Published)

Aizi Nor Mazila, Ramli and Tuan Norsyalieza, Tuan Aznan and Rosli, Md. Illias (2016) Bromelain: from Production to Commercialisation. Journal of the Science of Food and Agriculture. pp. 1-10. (Published)

Ajiboye, Adeleke Raheem and Ruzaini, Abdullah Arshah and Hongwu, Qin and Jamila, Abdul Hadi (2016) Comparing the Performance of Predictive Models Constructed Using the Techniques of Feed-Forword and Generalized Regression Neural Networks. International Journal of Software Engineering & Computer Sciences (IJSECS), 2. pp. 66-73. ISSN 2289-8522. (Published)

Ajit, Azilah (2016) Kinetic correlations of gas-liquid mass transfer coefficient and oxygen uptake rate of heterologous protein cultivation by sonobioreactor. (Unpublished)

Akbari, Abolghasem (2016) 5th Workshop on: Rainfall-runoff Simulation Supporting with GIS and Satellite Data. In: Workshop on: Rainfall-runoff Simulation Supporting with GIS and Satellite Data , 18-20 July 2016 , Faculty of Civil Engineering & Earth Resources, University of Malaysia Pahang. . (Unpublished)

Akbari, Abolghasem (2016) Application of DEMs in Geo-hazard Modeling. Faculty of Civil Engineering & Earth Resources, University Malaysia Pahang (UMP). (Unpublished)

Akbari, Abolghasem (2016) GIS & RS Applications in Simulation of Hydrological Process. In: GIS&RS Application in Simulation of Hydrological Process , 14-15 April 2016 , Network of Women Scientists of the Islamic World, Tehran, Iran. . (Unpublished)

Akbari, Abolghasem (2016) GIS-based River Discharge Modelling. In: GIS-based River Discharge Modelling , 1-3 June 2016 , University of Malaya, 50603 Kuala Lumpur. . (Unpublished)

Akbari, Abolghasem and Azizan, Abu Samah and Daryabor, Farshid (2016) Raster-Based Derivation of a Flood Runoff Susceptibility Map using the Revised Runoff Curve Number (CN) for the Kuantan Watershed, Malaysia. Environmental Earth Sciences, 75 (137). pp. 1-8. ISSN 1866-6299. (Published)

Akbari, Abolghasem and Azizan, Abu Samah and Ngien, S. K. (2016) Effect Of Slope Adjustment On Curve Number Using Global Digital Elevation Data: New Look Into Sharply-Williams And Huang Methods. In: Proceeding of Second International Conference on Scienc, Engineering & Environment , 21-23 November 2016 , Osaka City, Japan. pp. 946-950.. ISBN 978-4-9905958-7-6

Akbari, Abolghasem and Noram Irwan, Ramli and Ngien, S. K. and Reyhane, Azimi (2016) Application of Public Domain Satellite-Based DEMs in Natural Hazard Modeling. International Journal of Environmental Science and Development, 7 (2). pp. 140-144. ISSN 2010-0264. (Published)

Akbari, Sweeta (2016) Formation of water in crude oil emulsions and microwave-assisted chemical demulsification. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Akbari, Sweeta and Nour, A. H. and Fayaz, Fahim and Halimi, Mohammad Sediq and Nazari, Ahmadshah (2016) Analysis of Microwave Heating Process for Demulsification of Water-in-Crude Oil Emulsions. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 1-10. ISSN 1991-8178. (Published)

Akbari, Sweeta and Nour, A. H. and Saidatul Shima, Jamari and Fayaz, Fahim (2016) Rheology and Stability Mechanism of Water-in-crude Oil Emulsions Stabilized by Span 83. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2230-2235. ISSN 1819-6608. (Published)

Akbari, Sweeta and Nour, A. H. and Saidatul Shima, Jamari and Rajabi, Abdul Qayom (2016) Demulsification of Water-in-Crude Oil Emulsion via Conventional Heating and Microwave Heating Technology in their Optimum Conditions. Australian Journal of Basic and Applied Sciences, 10 (4). pp. 66-74. ISSN 1991-8178. (Published)

Akhtar, Muhammad Nadeem and Swee, Keong Yeap and Seema, Zareen and Siti Noor Hajar, Zamrus and Addila, Abu Bakar and Saiful Nizam, Tajuddin and Noorjahan Banu, Alitheen (2016) Small Molecules with Potential Biological Activities. In: International Conference in Organic Synthesis Malaysia , 21-24 August 2016 , Kuching, Sarawak. . (Unpublished)

Akhwanzada, Salman A. and Razman, Mat Tahar and Firdaus, Muhammad-Sukki and Abu Bakar, Munir and Ruzairi, Abdul Rahim (2016) Application of System Dynamics Approach in Electricity Sector Modelling: A Review. Renewable and Sustainable Energy Reviews, 56. pp. 29-37. ISSN 1364-0321. (Published)

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and M. R., Islam and Nitthiyah, Jeyaratnam and Yuvaraj, A. R. (2016) Polyurethane Types, Synthesis and Applications - A Review. RSC Advances, 6 (115). pp. 114453-114482. ISSN 2046-2069. (Published)

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and Nitthiyah, Jeyaratnam (2016) Effects of Ultrasound Treatment and Impact Modifier on Mechanical Properties of Oil Palm Fiber Reinforced Poly (Lactic) Acid Composites. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 437-444..

Al Adresi, Alaeldeen Saleh and Mohd Ridzuan, Darun (2016) Enhancing Employee’s Trust and Commitment through Strategic Human Resource Management: A Literature Review. International Journal of Academic Research in Business and Social Sciences (IJARBSS), 6 (5). pp. 413-426. ISSN 2222-6990. (Published)

Al-Sharafi, Mohammed A. and Ruzaini, Abdullah Arshah (2016) The Impact of Customer Trust and Perception of Security and Privacy on the Acceptance of Online Banking Services: Structural Equation Modeling Approach. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 171-177..

Al-Sharafi, Mohammed A. and Ruzaini, Abdullah Arshah and Abu-Shanab, Emad and Elayah, Nabil (2016) The Effect of Security and Privacy Perceptions on Customers’ Trust to Accept Internet Banking Services: An Extension of TAM. Journal of Engineering and Applied Sciences, 11 (3). pp. 545-552. ISSN 1816-949x (Print); 1818-7803 (Online). (Published)

Al-Sharafi, Mohammed A. and Ruzaini, Abdullah Arshah and Alajmi, Qasim and Herzallah, Fadi (2016) Understanding Online Banking Acceptance By Jordanian Customers: The Effect Of Trust Perceptions. In: Proceedings of the 6th IGCESH2016: International Graduate Conference on Engineering, Science and Humanities , 15-17 August 2016 , Universiti Teknologi Malaysia, Johor. pp. 436-438.. ISBN 978-967-0194-67-7

Al-Sharifi, H. A. M. and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh (2016) Effect of Newtonian Heating on the Mixed Convection Boundary Layer Flow of Eyring-Powell Fluid Across a Nonlinearly Stretching Sheet. Journal of Engineering and Applied Sciences, 11 (11). pp. 2372-2377. ISSN 1816-949x (Print); 1818-7803 (Online). (Published)

Al-Sharifi, H. A. M. and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and Norhafizah, Md Sarif and N. F., Mohammad and S., Shafie and A., Ali (2016) Influence Of Slip Velocity On Convective Boundary Layer Flow Of Jeffrey Fluid Under Convective Boundary Conditions. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10950-10953. ISSN 1819-6608. (Published)

Al-Sharifi, H. A. M. and L. A., Aziz and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and S., Shafie (2016) Influence of Slip Velocity and Aligned Magnetohydrodynamics on Convective Boundary Layer Flow of Jeffrey Fluid with Convective Boundary Condition Across Stretching Sheet. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 . pp. 886-891..

Al-Shetwi, Ali Q. and Alomoush, Muwaffaq I. (2016) A New Approach To The Solution Of Economic Dispatch Using Genetic Algorithm. Journal of Engineering and Technology, 7 (1). pp. 40-48. ISSN 2180-3811 (print); 2289-814X (online). (Published)

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod (2016) Modeling And Simulation Of Photovoltaic Module With Enhanced Perturb And Observe MPPT Algorithm Using Matlab/Simulink. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12033-12038. ISSN 1819-6608. (Published)

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod (2016) Modeling and Ddynamics Study of Large Scale PV System Connected Malaysian Grid under Different Fault Conditions. In: International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES) , 14-16 November 2016 , Putrajaya, Malaysia. pp. 488-494.. ISBN 978-1-5090-2889-4

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod (2016) Sizing and Design of PV Array for Photovoltaic Power Plant Connected Grid Inverter. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 193-199..

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod and Al Tarabsheh, A. and Altawil, Ibrahim A. (2016) Design and Economic Evaluation of Electrification of Small Villages in Rural Area in Yemen Using Stand-Alone PV System. International Journal of Renewable Energy Research, 6 (1). pp. 1442-1451. ISSN 1309-0127. (Published)

Al-haimi, Basheer and Hujainah, Fadhl (2016) Business Process Reengineering and Changing Management: A Case Study of Yemen Culture Attaché in Malaysia. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 49-52..

Alaa A., Al-Omoush and Al-Sewari, Abdul Rahman Ahmed Mohammed and Ameen, Bahomaid and Alamri, Hammoudeh S. and Kamal Z., Zamli (2016) Hyperdize Jaya Algorithm for Harmony Search Algorithm's Parameters Selection. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 788-791..

Alaa Azmi, Allahham and Mohammed, Muamer N. and Sadiq, Ali Safa (2016) Performance Evaluation of DSR, AODV, and OLSR Routing Protocols in MANET. In: International Conference On Computer Science & Computational Mathematics (ICCSCM 2016) , 5-6 May 2016 , Langkawi, Malaysia. pp. 1-8.. (Unpublished)

Alajmi, Qasim and Sadiq, Ali Safa (2016) Cloud Computing Technology Setups to Support: The Learning Management System (LMS) in Higher Education Institutions in Oman. In: Proceedings of International Conclave on Innovations in Engineering & Management (ICIEM-16) , 24-25 February 2016 , Waljat College of Applied Sciences, Sultanate of Oman. pp. 50-54.. ISBN 978-99969-0-773-9

Alajmi, Qasim and Sadiq, Ali Safa (2016) Opportunities and Challenges in Management Information Systems. International Journal of Applied Sciences and Management, 1 (2). pp. 171-182. ISSN 2413-3396. (Published)

Alajmi, Qasim and Sadiq, Ali Safa (2016) “What should be done to achieve greater use of cloud computing by higher education institutions”. In: IEEE 7th Annual Information Technology, Electronics and Mobile Communication Conference (IEMCON2016) , 13-15 October 2016 , Vancouver, BC, Canada. pp. 1-5.. ISBN 978-1-5090-0996-1

Alam, A. K. M. Moshiul and Beg, M. D. H. and R. M., Yunus (2016) Micro structure and Fractography of Multiwalled Carbon Nanotube Reinforced Unsaturated Polyester Nanocomposites. Polymer Composites. pp. 1-10. ISSN 1548-0569. (In Press / Online First) (In Press / Online First)

Alam, A. K. M. Moshiul and Beg, M. D. H. and R. M., Yunus and Mina, Md. Forhad and Maria, K. H. and Mieno, T. (2016) Evolution of Functionalized Multi-walled Carbon Nanotubes by Dendritic Polymer Coating and their Anti-scavenging Behavior During Curing Process. Materials Letters, 167 (March). pp. 58-60. ISSN 0167-577X. (Published)

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. and Wan Faizal, Wan Ishak (2016) Investigation of Light Non-Aqueous Phase Liquid Migration Single and Double-Porosity Soil Using Light Transmission Visualization Method (LTV). In: MATEC Web of Conferences: The 3rd International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2015) , 1-2 December 2015 , Melaka, Malaysia. pp. 1-6., 47 (03023). ISSN 2261-236X

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Samira, A. Kamaruddin (2016) Investigation of the Influence of Particle Size on the Migration of DNAPL in Unsaturated Sand. In: Proceedings of the 3rd International Conference on Civil, Offshore and Environmental Engineering (ICCOEE 2016) , 15-17 August 2016 , Kuala Lumpur, Malaysia. pp. 289-292.. ISBN 978-1-138-02978-1

Alazaiza, M. Y. D. and Ngien, S. K. and Mustafa, M. Bob and Samira, A. Kamaruddin and Wan Faizal, Wan Ishak (2016) Application of Light Reflection Method to Observe DNAPL Movement in Different Soil Media. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 95-99..

Alazaiza, M. Y. D. and Ngien, S. K. and Mustafa, M. Bob and Samira, A. Kamaruddin and Wan Faizal, Wan Ishak (2016) Behaviour Of Soil Structure In Double-Porosity Kaolin Media Using Light Transmission Visualization (LTV) Method. In: 10th International Conference of Geotechnical and Transportation Engineering (GEOTROPIKA 2016) , 17-18 February 2016 , Kuala Lumpur. pp. 1-6..

Alazaiza, M. Y. D. and Ngien, S. K. and Wan Faizal, Wan Ishak and Samira, A. Kamaruddin (2016) A Review of Light Reflection and Transmission Methods in Monitoring Non-Aqueous Phase Liquid Migration in Porous Media. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2319-2326. ISSN 1819-6608. (Published)

Albtoosh, Ja’far A. Aldibat and Ahmad Tarmizi, Haron and AL-Btoush, Mohammed A. KA. (2016) An Overview of Using Building Information Modelling (BIM) in Construction Management. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 541-543..

Alginahi, Yasser M. and Kabir, M. Nomani (2016) Simulation of Building Evacuation: Performance Analysis and Simplified Model. International Journal of Advanced Computer Science and Applications (IJACSA), 7 (8). pp. 10-17. ISSN 2156-5570(Online). (Published)

Ali, A. and Abdalla, Ahmed N. and Ruhaizad, Ishak and Jaber, Aqeel S. (2016) Overloaded Transmission Lines Protection Based On Intelligent Control Protection Scheme. Journal of Engineering and Applied Sciences, 11 (2). pp. 192-198. ISSN 1816-949X. (Published)

Ali, Eman N. (2016) Removal of Copper from Water System using Moringa oleifera Press Cake. In: International Association of Civil, Agricultural & Environmental Engineering Researchers (ACEE-16) , 18-19 April 2016 , Istanbul City, Turkey. pp. 15-18.. ISSN 0126-6039 ISBN 978-93-84468-49-1

Ali, Eman N. and K. N. S., Muhamad (2016) Comparison of Moringa Oleifera Seeds Oil Characterization Produced Chemically and Mechanically. IOP Conference Series: Earth and Environmental Science, 36. pp. 1-7. ISSN 1755-1315. (Published)

Ali, Gomaa A. M. and Fouad, Osama A. and Makhlouf, Salah A. (2016) Electrical Properties of Cobalt Oxide/Silica Nanocomposites Obtained by Sol-Gel Technique. American Journal of Engineering and Applied Sciences, 9 (1). pp. 12-16. ISSN 1941-7020 (Print); 1941-7039 (Online). (Published)

Ali, Gomaa A. M. and Fouad, Osama A. and S. A., Makhlouf and M. M., Yusoff and K. F., Chong (2016) Optical and Electrochemical Properties of Co3O4/SiO2 Nanocomposite. Advanced Materials Research, 1133. pp. 447-451. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Ali, Gomaa A. M. and M. M., Yusoff and K. F., Chong (2016) Graphene: Electrochemical Production and its Energy Storage Properties. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015 , 11-13 October 2015 , Johor Bahru, Johor, Malaysia. pp. 1-5..

Ali, Gomaa A. M. and Shoriya Aruni, Abdul Manaf and Divyashree, A and K. F., Chong and Hegde, Gurumurthy (2016) Superior Supercapacitive Performance in Porous Nanocarbons. Journal of Energy Chemistry, 25 (4). pp. 734-739. ISSN 2095-4956. (Published)

Ali, Mahathir (2016) Manfaat tempoh penangguhan untuk cari penyelesaian. Utusan Malaysia .

Ali, Md. Asraf and Sundaraj, Kenneth and R. Badlishah, Ahmad and Ahamed, Nizam Uddin and Islam, Md. Anamul and Sundaraj, Sebastian (2016) sEMG Activities of the Three Heads of the Triceps Brachii Muscle During Cricket Bowling. Journal of Mechanics in Medicine and Biology, 16 (2). pp. 1-13. ISSN 0219-5194. (Published)

Ali, Md. Yousuf and Rahman, Md. Wasikur and Moniruzzaman, Md. and Alam, Jahangir and Saha, Indrajit and Halim, Md. Abdul and Deb, Anjan and Sumi, Mst. Sumaia Akter and Parvin, Shahanaz and Biswas, Biplob Kumar and Haque, Md. Azizul and Khan, Maksudur R. and Khan, Mala (2016) Nypa Fruticans As A Potential Low Cost Adsorbent To Uptake Heavy Metals From Industrial Wastewater. In: Conference of Engineering & Technology, Computer, Basic & Applied Sciences (ECBA 2016) , 25-26 January 2016 , Singapore. pp. 18-25., 55 (5). ISBN 978-969-670-137-8

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof (2016) Mechatronic Design and Development of an Autonomous Mobile Robotics System for Road Mark Painting. In: 15th International Conference on Circuits, Systems, Electronics, Control and Signal Processing , 14-18 April 2016 , Istanbul, Turkey. pp. 1-6.. (Unpublished)

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof and Anwar, P. P. Abdul Majeed (2016) Sensors Fusion based Online Mapping and Features Extraction of Mobile Robot in the Road Following and Roundabout. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-12., 114. ISSN 1757-8981 (Print); 1757-899X (Online)

Ali, Muna Jalal and Makky, Essam A. and M. M., Yusoff (2016) Impact of Antimicrobial Agents on Bacterial Isolates from Dental Decay. ARPN Journal of Engineering and Applied Sciences, 11 (16). 9689-9693 . ISSN 1819-6608. (Published)

Ali, Muna Jalal and Makky, Essam A. and M. M., Yusoff (2016) Impact of Ethnomedicinal Plants on Toothpaste Improvement. In: The 2nd International Congress On Economics, Social Sciences and Information Management (ICESSIM 2016) , 19-20 March 2016 , Bali, Indonesia. . ISSN 0141-5492(Print); 1573-6776(Online)

Ali, Muna Jalal and Makky, Essam A. and M. M., Yusoff (2016) Microbiological Study against Bacterial Isolates from Different Patients. Australian Journal of Basic and Applied Sciences, 10 (14). pp. 366-373. ISSN 1991-8178. (Published)

Ali, Muna Jalal and Makky, Essam A. and M. M., Yusoff (2016) Oral Health Care Improvement using Combined Toothpaste with Traditional Medicinal Plants. Advances in Environmental Biology , 10 (7). pp. 315-321. ISSN 1995-0756. (Published)

Ali Kareem, Nahar (2016) Enhanced PAPR reduction and channel estimation techniques in multi-carrier wireless communication system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ali Mahmood, Humada (2016) Mathematical modelling and hybrid ACO-PSO technique for PV performance improvement. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mojgan, Hojabri).

Ali Mahmood, Humada and Hojabri, Mojgan and M. H., Sulaiman and Saad, Mekhilef (2016) Five Parameter PV Model Extraction and Improvement Based on Experimental Data. In: Advances In Functional Materials International Conference , 8-11 August 2016 , Jeju Island, South Korea. pp. 1-22.. (Unpublished)

Ali Zulfakar, Khairudin (2016) Design and development of drill bit sharpening jig for bench grinder. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Alkhateeb, Abdullah N. A. and Liu, Yao and Cheng, Jack Kie and Shaban, Omar Kassim A. (2016) Review On Intellectual Capital And Its Components Towards Competitive Advantage In Universities. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 763-774..

Almatar, Manaf and Batool, Tahira and Makky, Essam A. (2016) Therapeutic Potential of N-Acetylcysteine for Wound Healing, Acute Bronchiolitis, and Congenital Heart Defects. Current Drug Metabolism, 17 (2). pp. 156-167. ISSN 1875-5453. (Published)

Almatar, Manaf and Makky, Essam A. (2016) Cladosporium Cladosporioides from the Perspectives of Medical and Biotechnological Approaches. 3 Biotech, 6 (4). pp. 1-8. ISSN 2190-572X (print); 2190-5738 (online). (Published)

Alrubaye, Ali Jamal and Muzamir, Hasan and Al-Fattah, Mohammad (2016) Improving Geotechnical Characteristics of Kaolin Soil Using Silica Fume and Lime. Special Topics & Reviews in Porous Media: An International Journal, 7 (1). pp. 77-85. ISSN 2151-4798 (print); 2151-562X (online). (Published)

Alrubaye, Ali Jamal and Muzamir, Hasan and Fattah, Mohammed Y. (2016) Engineering Properties of Clayey Soil Stabilized with Lime. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2434-2441. ISSN 1819-6608. (Published)

Alsibai, Mohammad Hayyan and Abdul Manap, Sulastri (2016) A Study on Driver Fatigue Notification Systems. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10987-10992. ISSN 1819-6608. (Published)

Alyaa' 'Izzati, Ibrahim (2016) Analysis of lag time between the rainfall and flooding during december 2014 flood inccident in Pahang River Basin, Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amanlou, Yasaman and Hashjin, Teymour Tavakoli and Ghobadian, B. and G., Najafi and R., Mamat (2016) A comprehensive review of Uniform Solar Illumination at Low Concentration Photovoltaic (LCPV) Systems. Renewable and Sustainable Energy Reviews, 60. pp. 1430-1441. ISSN 1364-0321. (Published)

Ameer Ferdaus, Ab. Aziz (2016) 36 kontinjen sertai perarakan Maulidur Rasul di UMP. Utusan Malaysia . p. 30.

Ameer Ferdaus, Ab. Aziz (2016) Dekati Orang Asli menerusi dakwah. Utusan Malaysia . p. 30.

Ameer Ferdaus, Ab. Aziz (2016) UMP, KTYS jalin kerjasama akademik. Utusan Malaysia . p. 32.

Amiera, Saidi (2016) Consequence modelling using ALOHA for estimation of toxic gas dispersion from a chemical plant and evacuation planning in Teluk Kalong Industrial Area. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Amin Ridzuan, Ishak (2016) 4K punca prestasi graduan merosot. Berita Harian . p. 16.

Amin Ridzuan, Ishak (2016) Pensyarah UMP hasil kapsul halal daripada rumpai laut. Berita Harian . p. 4.

Amin Ridzuan, Ishak (2016) Serah bantuan air bersih, tenaga solar. Berita Harian . p. 11.

Amin Ridzuan, Ishak (2016) Syahir dinobat Olahragawan UMP 2015. Berita Harian (53).

Amin Ridzuan, Ishak (2016) UMP cipta aplikasi bantu pelajar hafal al-Quran. Berita Harian . p. 3.

Amin Ridzuan, Ishak (2016) UMP lulus biasiswa MyGift RM400,000. Berita Harian . p. 33.

Amir, Aghelie and Sorooshian, Shahryar and Noor Azlinna, Azizan (2016) Research Gap in Sustainopreneurship. Indian Journal of Science and Technology, 9 (12). pp. 1-6. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Amir, Aziz and Atiqah, Nisfun and R., Mamat and Ahmad Fitri, Yusop and Najafi, G. (2016) Properties of Biodiesel Derived from Vegetable Oil, Animal Fat and Waste Cooking Oil. In: 6th International Conference On “Engineering & Technology, Computer, Basic & Applied Sciences-ECBA , 29-30 July 2016 , Osaka Japan. pp. 1-6.. (Unpublished)

Amir, Khalid (2016) Finalis PABM 2016 tenangkan fikiran menjelang saingan akhir. Utusan Malaysia .

Amir Adhwa Afiq, Samsuri and Mohamad Fakhruddin, Mustafa and Nor Azhar, Ahmad (2016) A New Security Passcode Approach for Alzheimier Patient based on GeoLocation Identification. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 21-32.. ISBN 978-967-2054-04-7

Amira, Mohd Mustafa and Sorooshian, Shahryar (2016) Success and failure of small and medium enterprise. Penerbit UMP, Kuantan, Pahang. ISBN 9789672054238

Amirah Athirah, Sazali (2016) Substrates effect on structural and optical properties of indium tin oxide (ITO) thin films by sol gel method. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Amirruddin, Abdul Kadir and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Investigation of Waste Cooking Oil as a Tribological Lubricant for Piston Skirt Application. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

Amirul Hakim, Kamarazaman (2016) Spindle speed modulation for chatter suppression in machining process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Amirul Syafiq, Ibrahim (2016) Chatter detection on thin wall machining of alluminum alloy under MQL condition. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Andalib, Tarnima Warda and Mohd Ridzuan, Darun (2016) Identified Determinants of the Conceptual HRM Framework. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 939-942..

Aneesa Aqeela, Mohd Asha’ari (2016) Guest satisfaction survey on public bus services: a case study in Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Anis Ayesha, Noraini (2016) Comparison of soil-water characteristic curve (SWCC) on unburned and burned soil at varying temperature. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Anis Sakinah, Zainal Abidin and Kamal, Yusoh and Saidatul Shima, Jamari and A. H., Abdullah and Zulhelmi, Ismail (2016) Enhanced Performance of Alkylated Graphene Reinforced Polybutylene Succinate Nanocomposite. In: AIP Conference Proceedings, 2nd International Conference on Functional Materials and Metallurgy (ICoFM 2016) , 28 May 2016 , Penang, Malaysia. pp. 1-5., 1756 (040005). ISBN 978-0-7354-1414-3

Anisah Sajidah, Haji Saud and Indran, Vidhyaa Paroo and Nazira, Mahmud and Mohd Hasbi, Ab. Rahim (2016) Low Metal Loading Palladium Mixed-Oxides Catalyst for the Synthesis of Glycerol Carbonate. Asian Journal of Applied Sciences, 4 (1). pp. 181-189. ISSN 2321–0893. (Published)

Ansah, Richard Hannis and Sorooshian, Shahryar and Shariman, Mustafa (2016) Lean Construction: An Effective Approach for Project Management. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1607-1612. ISSN 1819-6608. (Published)

Ansah, Richard Hannis and Sorooshian, Shahryar and Shariman, Mustafa and Duvvuru, Gomanth (2016) Advancing Towards Delay-Free Construction Project: A Review. In: Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management , 23-25 September 2016 , Detroit, Michigan, USA. pp. 744-751.. ISBN 978-0-9855497-5-6

Ansah, Richard Hannis and Sorooshian, Shahryar and Shariman, Mustafa and Duvvuru, Gomanth (2016) Assessment of Environmental Risks in Construction Projects: A Case of Malaysia. In: Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management , 23-25 September 2016 , Detroit, Michigan, USA. pp. 752-763.. ISBN 978-0-9855497-5-6

Ansah, Richard Hannis and Sorooshian, Shahryar and Shariman, Mustafa and Duvvuru, Gomanth (2016) An Environmental Impact Framework for Evaluating Construction Projects Delays. In: Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management , 23-25 September 2016 , Detroit, Michigan, USA. pp. 764-772.. ISBN 978-0-9855497-5-6

Ansah, Richard Hannis and Sorooshian, Shahryar and Shariman, Mustafa and Duvvuru, Gomanth (2016) Lean Construction Tools. In: Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management , 23-25 September 2016 , Detroit, Michigan, USA. pp. 784-793..

Ansha, Richard Hannis (2016) Adoption of lean tools to control delays in Malaysian construction projects. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: UNSPECIFIED).

Anthony, Bokolo Jnr. and Mazlina, Abdul Majid (2016) Green IS for Sustainable Decision Making in Software Management. Journal of Soft Computing and Decision Support Systems, 3 (3). pp. 20-34. ISSN 2289-8603. (Published)

Anuar, Puteh and Rashidi, Abbas and Abd Ghafar, Don and Zilal, Saari and Muhammad Syafiee, Elias (2016) The Zakat Distribution Management of Majlis Agama Islam Negeri Johor for the Mu’allaf Asnaf. The International Journal of Islamic Studies, 38 (1). pp. 25-34. ISSN 0126-5636 . (Published)

Anuar, Puteh and Rashidi, Abbas and Abd. Ghafar, Don and Zilal, Saari and Muhammad Syafiee, Elias (2016) Pengurusan Agihan Zakat Asnaf Mu’allaf di Majlis Agama Islam Negeri Johor. Jurnal Islamiyyat, 38 (1). pp. 25-34. ISSN 0216-5636. (Published)

Arafat, Md. Yasir and Islam, Mir Sujaul and Mohamad Idris, Ali and Zularisam, A. W. (2016) Status and contamination level of water quality in Lake Chini, Malaysia. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 309-314..

Aravinda, Kottasamy and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and M. M., Noor and M. M., Rahman (2016) Aluminium Oxide (AL2O3) Nanoparticles with Long Life Coolant for Car Radiator Application. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished)

Arif, Hanafi and Sulaiman, Harun and Enggari, Sofika and Rani, Larissa Navia (2016) Detecting Duplicate Entry in Email Field using Alliance Rules-based Algorithm. Journal of Computer Science and Information Technology, 1 (1). pp. 71-81. (Published)

Arifah Nadiah, Che Zainol Ariff (2016) Fenomena perubahan iklim: tanda kiamat sudah dekat? Wadah (1). p. 3. ISSN 2180-0456

Arifah Nadiah, Che Zainol Ariff (2016) Klik dengan bijak. Wadah (1). p. 4. ISSN 2180-0456

Ariful, Haque and Kamal Z., Zamli (2016) Comparative Analysis of Neighborhood based Meta-heuristic Algorithms for MC/DC Test Data Generation. In: 3rd International Conference on Communication and Computer Engineering (ICOCOE 2016) , 15-17 March 2016 , Bandung, Indonesia. pp. 1-10.. (Unpublished)

Arina, Mazelan (2016) Design of miniature waterjet machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Asar, A. K. (2016) Pembinaan alat kufu' (kesetaraan) dalam perkahwinan (e-Kufu). , [Research Report: Research Report] (Unpublished)

Asar, A. K. and Ghalia, Bouhedda (2016) Islāmic Guidelines for Women to Work and Hold Public Office Positions. International Journal of Science and Research (IJSR), 5 (10). pp. 1311-1315. ISSN 2319-7064. (Published)

Ashmal Shahira, Ismail (2016) Synthesis and characterization of bio-phenolic glyoxal resins via liquefaction and resinification of empty fruit bunch fibres. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Asiah, Kassim and Ahmad Nasaruddin, Sulaiman (2016) Speaking Skills: Business English for Workplace Communication (Module 1). In: Business English for Workplace Communication Workshop , July - September 2016 , CMLHS, Universiti Malaysia Pahang, Gambang. . (Unpublished)

Asiah, Kassim and Ahmad Nasaruddin, Sulaiman (2016) Writing Skills: Business English for Workplace Communication (Module 2). In: Business English for Workplace Communication Workshop , July - September 2016 , CMLHS, Universiti Malaysia Pahang, Gambang. . (Unpublished)

Asmadianatasha, Asmanizam (2016) Assessing sustainability in environmental management system for Malaysian industry. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Asmara, Y. P. and J. P., Siregar and Cionita, Tezara and Chang, Tai Ann (2016) Improving Efficiency of Aluminium Sacrificial Anode Using Cold Work Process. IOP Conference Series: Materials Science and Engineering, 114 (1). pp. 1-6. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Asmara, Y. P. and M. F., Ismail and L., Giok Chui (2016) Predicting Effects of Corrosion Erosion of High Strength Steel Pipelines Elbow on CO2-Acetic Acid (HAc) Solution. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-5., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Asmara, Y. P. and Siregar, J. P. and C., Tezara and Wan, Nurlisa and J., Jamiluddin (2016) Long Term Corrosion Experiment of Steel Rebar in Fly Ash-Based Geopolymer Concrete in NaCl Solution. International Journal of Corrosion. (Published)

Asmara, Y. P. and Sutjipto, A. G. E. and H. N. M., Zuki and Siregar, J. P. and Bachtiar, Dandi and T., Kurniawan and M. C., Ismail (2016) Corrosion Inhibition of Carbon Steel in Oil and Gas Environments. International Journal of Advanced and Applied Sciences, 3 (5). pp. 88-91. ISSN 0973-4562 (Print); 0973-9769 (Online). (Published)

Asmawati, Sajari and Hasnah, Haron and Ishak, Ismail (2016) Role of Chief Integrity Officer in Malaysian Public Sector. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 135-141..

Asrol, Awang (2016) Tangan tak berfungsi tapi boleh berdiri. Harian Metro .

Asrul, Adam and Zuwairie, Ibrahim and Mohd Ibrahim, Shapiai and Marizan, Mubin (2016) Evaluation Of Different Peak Models Of Eye Blink Eeg For Signal Peak Detection Using Artificial Neural Network. Neural Network World, 1. pp. 67-89. ISSN 1210-0552. (Published)

Asrul, Adam and Zuwairie, Ibrahim and Norrima, Mokhtar and Mohd Ibrahim, Shapiai and Cumming, Paul and Marizan, Mubin (2016) Evaluation of Different Time Domain Peak Models using Extreme Learning Machine‐Based Peak Detection for EEG Signal. SpringerPlus, 5 (1036). pp. 1-14. ISSN 2193-1801. (Published)

Asrul, Adam and Zuwairie, Ibrahim and Norrima, Mokhtar and Mohd Ibrahim, Shapiai and Marizan, Mubin and Ismail, Saad (2016) Feature Selection using Angle Modulated Simulated Kalman Filter for Peak Classification of EEG Signals. SpringerPlus. pp. 1-24. ISSN 2193-1801. (Published)

Aswany, Omar (2016) Bantu pelajar buat pilihan. Sinar Harian .

Aswany, Omar (2016) Tiada bukti sahih. Sinar Harian . p. 38.

Athirah, Zulkifli (2016) The development of isohyet map for Pahang State using Kriging method. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Atikah, Selamat (2016) Simulation-based scheduling system at R2 Print Enterprise Kuantan. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Atnaw, Samson M. and Singh, Lakhveer and Hagos, F. Y. and Yousuf, Abu (2016) Road Construction Equipment Management: A Case Study on Selected Industry. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 91-97. ISSN 2289-697X. (Published)

Aufa, Zin and Kamarul Hawari, Ghazali and Norliana, Khamisan (2016) Early Detection of Spots High Water Saturation for Landslide Prediction Using Thermal Imaging Analysis. International Journal of Environmental Science and Development, 7 (1). pp. 41-45. ISSN 2010-0264. (Published)

Awad, Omar I. and R., Mamat and Obed M., Ali and I. M., Yusri (2016) Effect of Fuel Oil - Gasoline Fusel Blends on the Performance and Emission Characteristics of Spark Ignition Engine: A Review. Journal of Scienctific Research & Development , 3 (5). pp. 31-36. ISSN 1115-7569. (Published)

Awadalla, Mohamed Osman and Nour, A. H. (2016) Diagnostics of Electron Temperature in Laser Produced Plasma from Iron Using Plasma X-ray Emission. Australian Journal of Basic and Applied Sciences, 10 (17). pp. 107-113. ISSN 1991-8178. (Published)

Awanis, Romli and Marziah, Ab Wahab (2016) Application of ECO-CBR Tool for Sustainability Product Design. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 80-84.. ISBN 978-967-2054-04-7

Awanis, Romli and Prickett, Paul and Setchi, Rossitza and Soe, Shwe (2016) An Integrated Eco-Design Decision Making Tool. In: Sustainable Design and Manufacturing 2016. Springer International Publishing, pp. 537-548. ISBN 978-3-319-32096-0

Awanis, Romli and Setchi, Rossitza and Prickett, Paul and De la Pisa, Miguel (2016) Eco-Design Case-Based Reasoning Tool: The Integration of Ecological Quality Function Deployment and Case-Based Reasoning Methods for Supporting Sustainable Product Design. Proc IMechE Part B: Journal Engineering Manufacture. pp. 1-20. ISSN 0954-4054 (Print); 2041-2975 (Online). (Published)

Ayesha, Noor and Yuserrie, Zainuddin (2016) Job embeddedness model and employee intention to stay in ICT industries of Malaysia. In: 10th Asia-Pasific Business & Humanities Conference , 22-23 Feb 2016 , Hotel Istana, Kuala Lumpur, Malaysia. . (Unpublished)

Ayodele, Bamidele V. and Cheng, C. K. (2016) Biorefinery for the Production of Biodiesel, Hydrogen and Synthesis Gas Integrated with CHP from Oil Palm in Malaysia. Chemical Product and Process Modeling. ISSN 2194-6159 (print); 1934-2659 (online). (Published)

Ayodele, Bamidele V. and Hossain, M. Anwar and Chong, Soo Ling and Soh, Jiah Chee and Abdullah, Sureena and Khan, Maksudur R. and Cheng, C. K. (2016) Non-Isothermal Kinetics and Mechanistic Study of Thermal Decomposition of Light Rare Earth Metal Nitrate Hydrates using Thermogravimetric Analysis. Journal of Thermal Analysis and Calorimetry. pp. 1-13. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Ayodele, Bamidele V. and Hossain, M. Anwar and Nor Shahirah, Mohd Nasir and Khan, Maksudur R. and Cheng, C. K. (2016) Synthesis, Characterization and Catalytic Performance of Samarium Sesquioxide supported Cobalt Catalyst for Methane Dry Reforming to Syngas. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 809-819..

Ayodele, Bamidele V. and Hossain, Sk Safdar and Lam, Su Shiung and Osazuwa, Osarieme U. and Khan, Maksudur R. and Cheng, C. K. (2016) Syngas Production from CO2 Reforming of Methane over Neodymium Sesquioxide Supported Cobalt Catalyst. Journal of Natural Gas Science and Engineering, 34. pp. 873-885. ISSN 1875-5100. (Published)

Ayodele, Bamidele V. and Khan, Maksudur R. and Cheng, C. K. (2016) Catalytic Performance of Ceria-supported Cobalt Catalyst for CO-rich Hydrogen Production from Dry Reforming of Methane. International Journal of Hydrogen Energy, 41 (1). pp. 198-207. ISSN 0360-3199. (In Press / Online First) (In Press / Online First)

Ayodele, Bamidele V. and Khan, Maksudur R. and Cheng, C. K. (2016) Greenhouse Gases Mitigation by CO2 Reforming of Methane to Hydrogen-rich Syngas using Praseodymium Oxide Supported Cobalt Catalyst. Clean Technologies and Environment Policy. pp. 1-13. ISSN 1618-954X (Print); 1618-9558 (Online). (Published)

Ayodele, Bamidele V. and Khan, Maksudur R. and Cheng, C. K. (2016) Production of CO-rich Hydrogen Gas from Methane Dry Reforming over Co/CeO2 Catalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 210-219. ISSN 1978-2993. (Published)

Ayodele, Bamidele V. and Khan, Maksudur R. and Lam, Su Shiung and Cheng, C. K. (2016) Production of CO-rich Hydrogen from Methane Dry Reforming Over Lanthania-Supported Cobalt Catalyst: Kinetic and Mechanistic Studies. International Journal of Hydrogen Energy, 41 (8). pp. 4603-4615. ISSN 0360-3199. (Published)

Ayodele, Bamidele V. and Khan, Maksudur R. and Nooruddin, Sk Safdar and Cheng, C. K. (2016) Modelling and Optimization of Syngas Production by Methane Dry Reforming Over Samarium Oxide Supported Cobalt Catalyst: Response Surface Methodology and Artificial Neural Networks Approach. Clean Technologies and Environmental Policy, 19 (93). pp. 1-13. ISSN 1618-954X(Print); 1618-9558(Online). (Published)

Ayodele, Freida Ozavize and Liu, Yao and Hasnah, Haron and Sui, Hai Juan (2016) Review on Knowledge Sharing: Barriers and Motivations. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 225-237..

Ayu Andirah, Sakka (2016) Comparative studies between guidelines and actual practice of safety on site in perspective of PPE. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ayu Shakira, Shafie (2016) Comparison of different methods in estimating potential evapotranspiration. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azad, Saiful and Badia, Leonardo and Rahman, Md. Arafatur and Jasni, Mohamad Zain (2016) Raising Fairness Issue of Vehicle Routing Problem. In: IEEE International Conference on Intelligent Transportation Engineering (ICITE) , 20-22 August 2016 , Singapore. pp. 13-17.. ISBN 978-1-4673-9048-4

Azad, Saiful and Rahman, Md. Arafatur and Liew, Soung-Yue and Goh, Hock Guan (2016) A Store-and-delivery Based MAC Protocol for Air-ground Collaborative Wireless Networks for Precision Agriculture. In: 2015 IEEE 21st International Conference on Parallel and Distributed Systems , 14-17 December 2015 , Melbourne, Australia. pp. 792-796.. ISSN 1521-9097 ISBN 978-0-7695-5785-4

Azad, Saiful and Ranak, M. S. A. Noman and Rahman, Md. Arafatur (2016) VAP Code: A Secure Graphical Password Scheme for Smart Devices. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 443-450.. ISBN 978-967-2054-04-7

Azhari, H. Nour and Mohammed, Sulieman and M. M., Yusoff and Nour, A. H. and Mazza, M. Adam (2016) Bioassay-guided Isolation and Identification of Antifungal Compounds from Seeds of Swietenia Macrophylla King. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 55-62. ISSN 1991-8178. (Published)

Aziemah, Hashim (2016) Investigating the strength of polystyrene as aggregate replacement to produce ligthweight concrete wall panel. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azila-Nadiah, Dulli and Cheng, Jack Kie and Fazeeda, Mohamad (2016) Integrating discrete event simulation and value stream map in improving body shop production performance. In: 5th International Conference on Global Optimization and Its Applications (ICoGOIA 2016) , 21-22 October 2016 , Bandung, Indonesia. pp. 1-5.. (Unpublished)

Azim Ashraf, Othman (2016) Simulating river discharge for Selangor River Basin. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azimah, Saman and Mimi Sakinah, A. M. and Zularisam, A. W. (2016) Contribution of membrane fouling during Ultrafiltration of Hylocereus Polyrhizus Peel Extract. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 65-70..

Azimah, Saman and Mimi Sakinah, A. M. and Zularisam, A. W. (2016) Extraction of Betacyanin from Hylocereus Polyrhizus Peel Effect of Operating Conditions. In: International Conference in Organic Chemistry (ICOS2016) , 21-24 August 2016 , Kuching, Sarawak, Malaysia. pp. 1-7.. (Unpublished)

Aziman, Abdullah and Mukhlis, Mohamad and Farhah Nur Aina, Ghazali and Nur Alina, Ahmad Shuhaili and Nurul Saffinas, Maswi and Rubasri, Balamurali (2016) Digital iCGPA Simulator. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 156-159.. ISBN 978-967-2054-04-7

Aziz, Amir and Mamat, Rizalman and Abdullah, Abdul Adam and Zailan, Roziah (2016) Ambient air quality monitoring of particulate matter in around waste facilities. , [Research Report: Research Report] (Unpublished)

Aziz Zaid, Aziz Qannaf (2016) Extraction of carotene from moringa oleifera leaves for cosmetics uses. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azizan, Ramli and Mazlin, Mokhtar and Tuan Sidek, T. M. (2016) Pembangunan Industri Halal: Konsep Halalan-Toyyiban dan Pengurusan Keselamatan Industri dalam Kerangka Maqasid al-Shariah = Halal Industry Development: The Concept of Halalan-Toyyiban and Industrial Safety Management within the Framework of Maqasid al-Shariah. Ulum Islamiyyah Journal, 18. pp. 91-114. ISSN ISSN 1675 - 5936. (Published)

Azmi, Mohd Shariff and Hanida, Abdul Aziz and Noor Diana, Abdul Majid (2016) Way Forward in Process Safety Management (PSM) for Effective Implementation in Process Industries. Current Opinion in Chemical Engineering, 14. pp. 56-60. ISSN 2211-3398. (Published)

Azmi, Mohd Shariff and Hanida, Abdul Aziz and Noor Diana, Abdul Majid (2016) Way forward in Process Safety Management (PSM) for Effective Implementation in Process Industries. Current Opinion in Chemical Engineering, 14. pp. 56-60. ISSN 2211-3398. (Published)

Azmi, W. H. and A. A. M., Redhwan and M. Z., Sharif and R., Mamat (2016) Thermal Conductivity Enhancement Of AL2O3 and SIO2 Nanolubricants. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9.. (Unpublished)

Azmi, W. H. and Khamisah, Abdul Hamid and N. A., Usri and R., Mamat and K. V., Sharma (2016) Heat Transfer Augmentation of Ethylene Glycol: Water Nanofluids and Applications – A review. International Communications in Heat and Mass Transfer, 75. pp. 13-23. ISSN 0735-1933. (Published)

Azmi, W. H. and Khamisah, Abdul Hamid and R., Mamat and K. V., Sharma and Mohd Sham, Mohamad (2016) Effects of Working Temperature on Thermo-Physical Properties and Forced Convection Heat Transfer of TiO2 Nanofluids in Water–Ethylene Glycol Mixture. Applied Thermal Engineering, 106. pp. 1190-1199. ISSN 1359-4311. (Published)

Azmi, W. H. and Khamisah, Abdul Hamid and Usri, N. A. and R., Mamat and Mohd Sham, Mohamad (2016) Heat Transfer and Friction Factor of Water and Ethylene Glycol Mixture Based TiO2 and Al2O3 Nanofluids Under Turbulent Flow. International Communications in Heat and Mass Transfer, 76. pp. 24-32. ISSN 0735-1933. (Published)

Azmir, Azhari and S., Sulaiman and A. K., Prasada Rao (2016) A Review on the Application of Peening Processes for Surface Treatment. IOP Conference Series: Materials Science and Engineering, 114 (012002). pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Azmir, Azhari and Schindler, Christian and Godard, Claudia and Gibmeier, Jens and Kerscher, Eberhard (2016) Effect of Multiple Passes Treatment in Waterjet Peening on Fatigue Performance. Applied Surface Science. pp. 1-7. ISSN 0169-4332. (Published)

Azniah, Ismail and Maizatul Hayati, Mohamad Yatim and Noor Azida, Sahabudin and Nor Zuhaidah, Mohamed Zain (2016) Capability of Primary School Pupils in Learning and Exploring Visual Programing Language = Keupayaan murid sekolah rendah mempelajari dan menerokai bahasa pengaturcaraan visual. Journal of ICT in Education (JICTIE), 3 (1). pp. 89-97. ISSN 2289-7844. (Published)

Azoddein, Abdul Aziz Mohd and Abu Seman, M. N. and Said, Nurdin and Nik Meriam, Nik Sulaiman (2016) Characterization of enzyme produced from pseudomonas putida for BTX (benzene, toluene & xylene) treatment in petrochemical industry wastewater system. , [Research Report: Research Report] (Unpublished)

Azra Shakira, Hassan (2016) Comparison of structural and optical properties of zinc oxide and silver doped zinc oxide thin films at various layers using spin coating technique. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Azree, Mohamad Azizi (2016) The effect of thermoforming temperature and mould vent hole to the thermoplastic container made of 0.5 mm polypropylene (PP) sheet. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Azwan, Airuddin (2016) Study of liquid contact angle in different solid surfaces. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Azwan, Harun and Nik Khairul Irfan, Nik Ab Lah and Hazlina, Husin and Zulkafli, Hassan (2016) An Overview of Wax Crystallization, Deposition Mechanism and Effect of Temperature & Shear. In: International Conference on Industrial Engineering, Management Science and Application (ICIMSA) , 23-26 MAY 2016 , Jeju Island, South Korea. pp. 1-5.. ISBN 978-1-5090-1671-6

Azwin, Ahmad and Mimi Sakinah, A. M. and S. Mohd, Ahmadi (2016) Optimization of Gluten Free Bread Formulation by Adding Xanthan Gum, Potato Starch and Sorbitol Using Response Surface Methodology. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 607-615..

A’azimah, Sa’adon Zubir (2016) A simulation study of photovoltaic modelling for DC-DC converter system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

B., Norhafzan and S. N., Aqida and E., Chikarakara and D., Brabazon (2016) Surface Modification of AISI H13 Tool Steel by Laser Cladding with NiTi Powder. Applied Physics A. pp. 2-6. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

Baarath, Kunjunni (2016) Implementation of platooning strategy for autonomous mobile robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Baarimah, A. O. and Sharifah Maszura, Syed Mohsin (2016) An Overview of Using Steel Fibers in Reinforced Concrete Structural Elements to Improve Shear Reinforcement. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 260-265..

Badaruddin, Muhammad and Khairul Hamimah, Abas and Mohd Riduwan, Ghazali (2016) Vector Evaluated Gravitational Search Algorithm Assisted by Non-dominated Solutions in Solving Multiobjective Optimization Problems. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 961-966..

Badaruddin, Muhammad and Zuwairie, Ibrahim and Kamil Zakwan, Mohd Azmi and Khairul Hamimah, Abas and Nor Azlina, Ab. Aziz and Nor Hidayati, Abd Aziz and Mohd Saberi, Mohamad (2016) Four Different Methods to Hybrid Simulated Kalman Filter (SKF) with Gravitational Search Algorithm (GSA). In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 854-864..

Badaruddin, Muhammad and Zuwairie, Ibrahim and Kamil Zakwan, Mohd Azmi and Khairul Hamimah, Abas and Nor Azlina, Ab. Aziz and Nor Hidayati, Abd Aziz and Mohd Saberi, Mohamad (2016) Four Different Methods to Hybrid Simulated Kalman Filter (SKF) with Particle Swarm Optimization (PSO). In: National Conference For Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 843-853..

Badaruddin, Muhammad and Zuwairie, Ibrahim and Kamil Zakwan, Mohd Azmi and Khairul Hamimah, Abas and Nor Azlina, Ab. Aziz and Nor Hidayati, Abd Aziz and Mohd Saberi, Mohamad (2016) Performance Evaluation of Hybrid SKF Algorithms: Hybrid SKF-PSO and Hybrid SKF-GSA. In: National Conference For Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 865-874..

Badhrulhisham, Abdul Aziz (2016) The Role of Higher Education in Managing Conflict Situations in Society for Sustainable Development: A Case Study Of UMP’s Contribution in the Controversial Lynas Rare Earth Project. In: The Global Higher Education Forum (GHEF2016) , 5-7 April 2016 , Penang, Malaysia. pp. 1-11.. (Unpublished)

Badihah, Ismail (2016) Intelligent light control system (ILIC). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Badrul Naim, Abidin (2016) Warisan Sri Pujangga UMP raih johan dikir barat. UMP News . (Unpublished)

Badshah, Gran and Liew, Siau-Chuin and Jasni, Mohamad Zain and Mushtaq, Ali (2016) Watermark Compression in Medical Image Watermarking Using Lempel-Ziv-Welch (LZW) Lossless Compression Technique. Journal of Digital Imaging, 29 (2). pp. 216-225. ISSN 0897-1889. (Published)

Bagaber, Salem Abdullah and A. R., Yusoff (2016) Analysis of Dry Turning Process of AISI316 for Coated and Uncoated Insert Tools Based on Economical Method. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 683-692..

Bagaber, Salem Abdullah and Izman, Sudin (2016) Assessment Influence of Microwave Heating on a Physical Properties of Dried Clay Bricks Compared with Conventional Methods. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 676-682..

Balakrishnan, Yogaraja and At-Tasneem, Mohd Amin (2016) Parametric Study of Multiple Configurations of Pico Hydrokinetic Turbines using CFD. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-8., 74 (00024). ISSN 2261-236X

Basheer, Esmail Abdullah Mohammed (2016) Investigating the effect of design parameters on the performance of microfluidics electrochemical biosensor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Basir, Zahrom (2016) Jana pendapatan, optimumkan perbelanjaan. Berita Harian .

Basir, Zahrom (2016) Sumber gula glikosaminoglikan daripada sisa ikan. Berita Harian (342). V4.

Batool, Tahira (2016) Production of microbial L-asparaginase. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Batool, Tahira and Makky, Essam A. and Ali, Muna Jalal and M. M., Yusoff (2016) A Comprehensive Review on l-Asparaginase and Its Applications. Applied Biochemistry and Biotechnology, 178 (5). pp. 900-923. ISSN 1559-0291. (Published)

Bechshøft, Rasmus Leidesdorff and Reitelseder, Søren and Højfeldt, Grith and Castro-Mejía, Josué Leonardo and Khakimov, Bekzod and Hajar Fauzan, Ahmad and Kjær, Michael and Engelsen, Søren Balling and Johansen, Susanne Margrete Bølling and Rasmussen, Morten Arendt and Lassen, Aske Juul and Jensen, Tenna and Beyer, Nina and Serena, Anja and Perez-Cueto, Frederico Jose Armando and Nielsen, Dennis Sandris and Jespersen, Astrid Pernille and Holm, Lars (2016) Counteracting age-related loss of skeletal muscle mass: a clinical and ethnological trial on the role of protein supplementation and training load (CALM Intervention Study): Study protocol for a randomized controlled trial- no UMP affiliation. Trials, 17 (1). pp. 1-17. ISSN 1745-6215. (Published)

Beg, M. D. H. and Akindoyo, John Olabode and Suriati, Ghazali and Nitthiyah, Jeyaratnam (2016) Synthesis and Characterization of Hydroxyapatite from Biowaste for Potential Medical Application. In: 18th International Conference on Materials Processing and Metallurgical Fundamentals , 5-6 September 2016 , Narita Tobu Hotel Airport Japan, Tokyo, Japan. . (Unpublished)

Beg, M. D. H. and Kormin, S. and Mohd Bijarimi, Mat Piah and Zaman, Haydar U. (2016) Preparation and Characterization of Low-density Polyethylene/Thermoplastic Starch Composites. Advances in Polymer Technology, 35 (1). p. 21521. ISSN 1098-2329. (Published)

Beg, M. D. H. and Zaman, Haydar U. (2016) Banana Fiber Strands–Reinforced Polymer Matrix Composites. Composite Interfaces, 23 (4). pp. 281-295. ISSN 0927-6440 (print); 1568-5543 (online). (Published)

Beg, M. D. H. and Zaman, Haydar U. (2016) Mechanical, Thermal, And Rheological Properties of Nano-Calcium Carbonate/Polypropylene Composites Modified Bymethacrylic Acid. Journal of Thermoplastic Composite Materials. ISSN 1530-7980 (print); 0892-7057 (online). (Published)

Beh, Khi Khim (2016) Process development of the device using in-house plate-to-plate tool with nanoimprint lithography technique for biochip application. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Benedick Conolius, Gabriel Addris (2016) Current measurement of engine oil with various gap length electrode. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Benraghda, Abdelmadjid (2016) A correlational study between attitudes and oral presentation performance among undergraduates in Universiti Malaysia Pahang (UMP). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zuraina, Ali).

Bijarimi, Mohd and Beg, M. D.H. and Yunus, Rosli Mohd (2016) Investigation of thermal, mechanical and fracture toughness properties of biodegradable hybrid nanocomposites. , [Research Report: Research Report] (Unpublished)

Biswas, Tapan Kumar and Sarkar, Shaheen M. and M. M., Yusoff and Lutfor, M. R. (2016) Synthesis and Characterization of Azobenzene-Based Gold Nanoparticles for Photo-Switching Properties. Journal of Molecular Liquids, 214. pp. 231-237. ISSN 0167-7322. (Published)

Bokolo, Anthony Jnr and Mazlina, Abdul Majid (2016) Development of a Green ICT Model for Sustainable Enterprise Strategy. Journal of Soft Computing and Decision Support Systems, 3 (3). pp. 1-12. ISSN 2289-8603. (Published)

Boland, J. W. and Howlett, P. G. and Piantadosi, J. and Roslinazairimah, Zakaria (2016) Modelling and Simulation of Volumetric Rainfall for a Catchment in the Murray-Darling Basin. ANZIAM Journal. pp. 1-24. ISSN 1445-8735. (In Press / Online First) (In Press / Online First)

Brubaker, C. E. and Messersmith, P. B. and S. N., Aqida (2016) Biological Adhesion. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-22. ISBN 978-0-12-803581-8

C. Santhana, Krishnan and Mimi Sakinah, A. M. and Singh, Lakhveer and Zularisam, A. W. (2016) Production of Biodiesel using Tannery Fleshing as a Feedstock via Solid-state Fermentation. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 10 (5). pp. 532-537. ISSN 1307-6892. (Published)

C. W., Mohd Noor and R., Mamat and G., Najafi and Mohd Hafizil, Mat Yasin and C. K., Ihsan and M. M., Noor (2016) Prediction of Marine Diesel Engine Performance by Using Artificial Neural Network Model. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1917-1930. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

C. W., Mohd Noor and R., Mamat and Wan Mohd, Norsani and M. M., Noor (2016) An investigation of using palm biodiesel blend on the performance of a stationary marine diesel engine. Defence S&T Technical Bulletin, 9 (2). pp. 86-97. ISSN 1985-6571. (Published)

C. Zafirah, Rosly and Ummu Kulthum, Jamaludin and Nurul Suraya, Azahari (2016) Parametric Study on Efficiency of Archimedes Screw Turbine. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10904-10908. ISSN 1819-6608. (Published)

Cai, Huayang and Savenije, H. H. G. and Gisen, J. I. A. (2016) A Coupled Analytical Model for Salt Intrusion and Tides in Convergent Estuaries. Hydrological Sciences Journal, 61 (2). pp. 402-419. ISSN 2150-3435. (Published)

Cassinath, Z. and A. K., Prasada Rao (2016) Development of Axial Continuous Metal Expeller for Melt Conditioning of Alloys. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-6., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Cecelia, Linggang (2016) Performance of modified sampling technique in reducing disturbance on peat soil sample. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chahal, Sugandha (2016) Electrospun hydroxyethyl cellulose nanofibrous scaffolds functionalized with hydroxyapatite for bone tissue engineering. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Chahal, Sugandha and Jahir Hussain, Fathima Shahitha and Kumar, Anuj and Mohammad Syaiful Bahari, Abdull Rasad and M. M., Yusoff (2016) Fabrication, Characterization and In Vitro Biocompatibility of Electrospun Hydroxyethyl Cellulose/poly (vinyl) Alcohol Nanofibrous Composite Biomaterial for Bone Tissue Engineering. Chemical Engineering Science, 144. pp. 17-29. ISSN 0009-2509. (Published)

Chan, Chao Shiung (2016) Design of software code to improve the accuracy of shrimp grading machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chan, Chung Hoong and M. A., Ameedeen (2016) Intuitive Content Management System to Preferences Template Throughout Data Collection by using Data Mining Classification of Prediction Method. In: Progress in Computer Sciences and Information Technology International Conference (PROCSIT) , 20 December 2016 , Kedah, Malaysia. pp. 1-4.. (Unpublished)

Chan, Shi Jing and Pebrianti, Dwi (2016) Fault Detection and Identification in Quadrotor System (Quadrotor Robot). In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS) , 22 October 2016 , Shah Alam, Malaysia. pp. 11-16.. ISBN 978-1-5090-4186-2

Chan, Shi Jing and Pebrianti, Dwi and M. F., Abas and Luhur, Bayuaji (2016) Fault Tolerance for Complex System. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 343-351..

Chan, Shiao Ting (2016) Evaluation of sewerage inflow and infiltration in residential areas within Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chan, Weng Howe and Mohd Saberi , Mohamad and Safaai , Deris and Corchado, Juan Manuel and Omatu, Sigeru and Zuwairie, Ibrahim and Shahreen, Kasim (2016) An Improved gSVM-SCADL2 with Firefly Algorithm for Identification of Informative Genes and Pathways. International Journal of Bioinformatics Research and Applications, 12 (1). (Published)

Chang, Tai Ann (2016) Development and analysis of direct current low energy micro-sheet-forming machine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Chang, Ying Shi (2016) Methane dry reforming over copper and iron substituted strontium cobalt oxide perovskite catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chatterton, Charlene Cassandra (2016) Extracting bioactive compounds from moringa oleifera leaves for anticancer product. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Che Nur Mazadillina, Zahari and Nina Suhaity, Azmi (2016) Halal source of medication; glycosaminoglycan based medicinal plantc. International Journal of Applied Chemistry, 12 (4). pp. 803-810. ISSN 0973-1792. (Published)

Cheah, Chor Sooi and Hasnah, Haron (2016) Little Boardroom Dissent. FocusM . pp. 10-12.

Cheang, Yee (2016) Strengthening of slab with openings located in the shear zone with CFRP sheets and anchors. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Cheng, C. K. and Chang, Ying Shi (2016) Strontium Cobalt Oxide Perovskite for Methane Dry Reforming. In: eProceedings of iCAT2016: International Conference on Catalysis , 20-21 September 2016 , Johor Bahru, Malaysia. . (In Press / Online First)

Cheng, C. K. and Han, Jie Chan (2016) Potential of Empty Fruit Bunch Clinker as a Support for Nickel and Cobalt Catalysts in Methane Dry Reforming: Waste to Wealth Approach. Journal of the Taiwan Institute of Chemical Engineers, 62. pp. 76-83. ISSN 1876-1070. (Published)

Cheng, C. K. and Mohd Rizauddin, Deraman and Ng, Kim Hoong and Khan, Maksudur R. (2016) Preparation of Titania Doped Argentum Photocatalyst and its Photoactivity Towards Palm Oil Mill Effluent Degradation. Journal of Cleaner Production, 112 (Prt. 1). pp. 1128-1135. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Cheng, Chin Kui (2016) Synthesis and characterization of efb clinker supported nickel catalyst for syngas production from reactive fluid mixture of CO2-CH4. , [Research Book Profile: Research Report] (Unpublished)

Cheng, Ching Yee and Yong, Ying Mei (2016) The analysis of polysemous words In HSK level 1 exam papers. In: International Conference on Teaching Mandarin as a Second Language in Malaysia , 5 - 6 November 2016 , Kong Zi Institute, University of Malaya, Kuala Lumpur, Malaysia. .

Chew, Few Ne and Abd Rahim, Syarifah and Cheng, Chin Kui (2016) Seawater corrosion resistant heat transfer agent (HTA) to improve water evaporation in solar still. , [Research Report: Research Report] (Unpublished)

Chia, Vi Vien and Batool, Tahira and Makky, Essam A. and Nina Suhaity, Azmi and Mashitah, Mohd Yusoff (2016) Production of L-asparaginase from natural substrates by escherichia coli atcc 10536 and comparison of physiology parameters. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9680-9684. ISSN 1819-6608. (Published)

Chia, Zhen Hon and Nor Azhar, Ahmad (2016) An Effective Fast Searching Algorithm for Internet Crawling Usage. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 58-63.. ISBN 978-967-2054-04-7

Chiam, Siew Ting (2016) Design selection of floating brake calliper magnesium hybrid composites. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chin, S. Y. and Anwaruddin, Hisyam and Haniif, Prasetiawan (2016) Modeling and Simulation Study of an Industrial Radial Moving Bed Reactor for Propane Dehydrogenation Process. International Journal of Chemical Reactor Engineering, 14 (1). pp. 33-44. ISSN 2194-5748 (Print); 1542-6580 (Online). (Published)

Chin, S. Y. and Anwaruddin, Hisyam and Haniif, Prasetiawan (2016) Modeling and Simulation Study of an Industrial Radial Moving Bed Reactor for Propane Dehydrogenation Process. International Journal of Chemical Reactor Engineering, 14 (1). pp. 33-44. ISSN 2194-5748. (Published)

Chin, S. Y. and M. R., Kamaruzaman and M. A. A., Ahmad (2016) Synthesis and Characterization of Dealuminated Ultra-Stable Zeolite Y Supported Cesium Salt of Phosphotungstic Acid for the Esterification of Acrylic Acid with Butanol. Chemical Engineering Communications, 203 (11). pp. 1515-1521. ISSN 0098-6445 (print); 1563-5201 (online). (Published)

Chin, Siew Choo and Doh, Shu Ing and Kusbiantoro, Andri and Yih, Kang Wong and Saffuan, Wan Ahmad (2016) Characterization of Sewage Sludge Ash (SSA) in Cement Mortar. Journal of Engineering and Applied Sciences, 11 (4). pp. 2242-2247. ISSN 1819-6608. (Published)

Chin, Siew Choo and Shafiq, Nasir and Nuruddin, Muhd Fadhil (2016) Behaviour of RC Beams with CFRP-Strengthened Openings. Structural Concrete, 17 (1). pp. 32-43. ISSN 1751-7648. (Published)

Chong, Soo Ling and Soh, Jiah Chee and Cheng, C. K. (2016) Production of Ethylene from Ethanol Dehydration over H3PO4-Modified Cerium Oxide Catalyst. In: 3rd International Conference on Advanced Technology & Sciences (ICAT'16) , 1-3 September 2016 , Konya, Turkey. pp. 1-10.. (Submitted)

Choo, Chee Hua (2016) Surface modification using EDM wire cut method: a feasibility study. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chowdhury, M. N. K. and Ahmad Fauzi, Ismail and Beg, M. D. H. and Khan, Maksudur R. and Gohari, Rasoul Jamshidi and Muhammad Abdul Razis, Saidin and M. R., Islam and Ong, Huei Ruey (2016) Control of Biodegradability in a Natural Fibre based Nanocomposite as a Function of Impregnated Copper Nanoparticle. RSC Advances, 6 (34). pp. 28937-28946. ISSN 2046-2069. (Published)

Chowdhury, Mohammad Asaduzzaman and Debnath, Uttam K. and Nuruzzaman, D. M. and Islam, Md. Monirul (2016) Experimental Analysis of Aluminum Alloy under Solid Particle Erosion Process. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 230 (12). pp. 1516-1541. ISSN 2041-305X. (Published)

Christine, Wong (2016) Mechanical properties of concrete incorporating porcelain granite tiles as partial aggregate. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chua, Gek Kee (2016) Development of a Low Serum Medium for the Production of Monoclonal Antibody Against Congenital Adrenal Hyperplasia by Hybridoma Culture. Preparative Biochemistry and Biotechnology, 46 (7). pp. 679-685. ISSN 1082-6068. (Published)

Chua, Gek Kee and Chin, Sim Yee and Zainol, Norazwina (2016) Tertiary treatment of palm oil mill effluent (POME) by the combination of microalgae and activated sludge using sequential batch reactor. , [Research Report: Research Report] (Unpublished)

Chuan, Yi Foo and Hong, Ngee Lim and Mohd Adzir, Mahdi and K. F., Chong and Nay, Ming Huan (2016) High-Performance Supercapacitor Based on Three-Dimensional Hierarchical rGO/Nickel Cobaltite Nanostructures as Electrode Materials. Journal of Physical Chemistry C, 120 (38). pp. 21202-21210. ISSN 1932-7447 (print); 1932-7455 (online). (Published)

Chun, Yi Leong and Chua, Gek Kee and Rozaimi, Abu Samah and Chew, Few Ne (2016) Purity and concentration of solubilized inclusion bodies in protein refolding. In: The International Conference on Bioscience and Medical Engineering (ICBME) 2016 , 10 October 2016 , Universiti Teknologi Malaysia, Faculty of Bioscience & Medical Engineering. . (Unpublished)

D., Mathivanan and H., Norfazilah and J. P., Siregar and M. R. M., Rejab and Bachtiar, Dandi and C., Tezara (2016) The Study of Mechanical Properties of Pineapple Leaf Fibre Reinforced Tapioca Based Bioplastic Resin Composite. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-4., 74 (00016). ISSN 2261-236X

D., Ramasamy and K., Kadirgama and M. M., Rahman and M. M., Noor (2016) Wood Based Cellulose Nano Particles for Automotive Radiator. Auto INEXSS Issue 11:2016, 11 . pp. 25-26.

D., Ramasamy and M. M., Noor and M. M., Rahman and W. G. B. , Horizon (2016) Analysis of Modifications on a Spark Ignition Engine for Operation with Natural Gas. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00031). ISSN 2261-236X

D., Ramasamy and Z. A., Zainal and K., Kadirgama and Briggs, Horizon Walker-Gitano (2016) Effect of Dissimilar Valve Lift on a bi-fuel CNG Engine Operation. Energy, 112. 509 - 519. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

D. N., Noor and Azim, Arshad and Z., Azran and Hassan, Ibrahim and F., Basrawi (2016) A Review on the Recent Development of Solar Absorption and Vapour Compression based Hybrid Air Conditioning with Low Temperature Storage. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-9., 38 (02007). ISSN 2261-236X

Damhuji, Rifai and Abdalla, Ahmed N. and Kharudin, Ali (2016) Defect Signal Analysis For Nondestructive Testing Assesment. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2160-2167. ISSN 1819-6608. (Published)

Damhuji, Rifai and Abdalla, Ahmed N. and Kharuldin, Ali and Ramdan, Razali (2016) Giant Magnetoresistance Sensors: A Review on Structures and Non-Destructive Eddy Current Testing Applications. Sensors, 16 (3). pp. 298-328. ISSN 1424-8220. (Published)

Damhuji, Rifai and Abdalla, Ahmed N. and Noraznafulsima, Khamshah and Mohd, Aizat and Mohd, Fadzli (2016) Subsurface Defects Evaluation using Eddy Current Testing. Indian Journal of Science and Technology, 9 (9). pp. 1-7. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Damirchi, Hojjatollah and G., Najafi and Alizadehnia, Siamak and R., Mamat and Che Sidik, Nor Azwadi and Azmi, W. H. and M. M., Noor (2016) Micro Combined Heat and Power to Provide Heat and Electrical Power using Biomass and Gamma-type Stirling Engine. Applied Thermal Engineering, 103. pp. 1460-1469. ISSN 1359-4311. (Published)

Daryabor, Farshid and See, Hai Ooi and Azizan, Abu Samah and Akbari, Abolghasem (2016) Tides and Their Dynamics over the Sunda Shelf of the Southern South China Sea. PLoS ONE, 11 (9). pp. 1-24. ISSN 1932-6203. (Published)

Daryabor, Farshid and See, Hai Ooi and Azizan, Abu Samah and Akbari, Abolghasem (2016) Dynamics of the Water Circulations in the Southern South China Sea and Its Seasonal Transports. PLoS ONE, 11 (7). pp. 1-20. ISSN 1932-6203. (Published)

Das, Debashish and Sadiq, Ali Safa and Noraziah, Ahmad (2016) An Efficient Time Series Analysis for Pharmaceutical Sector Stock Prediction by Applying Hybridization of Data Mining and Neural Network Technique. Indian Journal of Science and Technology, 9 (21). pp. 1-7. ISSN 0974-6846. (Published)

Das, S. and Ain, W. Q. and Azmir, Azhari and A. K., Prasada Rao (2016) Temperature Gradient Field Theory of Nucleation. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Das, Sreejon and Yousuf, Abu and Khan, Maksudur R. and Iqbal, Salma Akhter and Md. Nasir, Uddin (2016) Assessment of Organic Acid-Rich Bio-Sap to Generate Electricity. International Journal of Sustainable Energy. pp. 1-11. ISSN 1478-6451 (print); 1478-646X (online). (Published)

Debnath, U. K. and Chowdhury, M. A. and Nuruzzaman, D. M. (2016) Study of Erosion Performance and Characterization of Ebonite Reinforced With Carbon Fibers. Materials Performance and Characterization, 5 (1). pp. 312-329. ISSN 2165-3992 . (Published)

Diana Surya, Abd Wahab (2016) Kerajaan ajak belia ternak kelulut. Sinar Harian .

Diana Surya, Abd Wahab (2016) Pindah mangsa banjir lebih awal. Sinar Harian . p. 36.

Diana Surya, Abd Wahab (2016) Selesai masalah urus sumber air. Sinar Harian . p. 36.

Diana Surya, Abd Wahab (2016) UMP memasyarakatkan teknologi. Sinar Harian .

Divyashree, A. and Shoriya Aruni, Abdul Manaf and Yallappa, S. and Kathyayini, N. and Hegde, Gurumurthy (2016) Low Cost, High Performance Supercapacitor Electrode Using Coconut Wastes: Eco-Friendly Approach. Journal of Energy Chemistry, 25 (5). pp. 880-887. ISSN 2095-4956. (Published)

Doh, Shu Ing and Chin, Siew Choo and Tan, Kim Guan and Suil, Adilen (2016) The Use of Sewage Sludge Ash (SSA) as Partial Replacement of Cement in Concrete. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3371-3375. ISSN 1819-6608. (Published)

Dzulqarnain, Abu Bakar and Norazura, Ismail (2016) The Integral Approach to Safety. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 19-24. ISSN 2289-697X. (Published)

E, Soon Shen (2016) Formulation and characterization of water-in-diesel emulsion as environmental friendly fuel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

E. J., Mohamad and Ruzairi, Abdul Rahim and Mohd Hafiz, Fazalul Rahiman and H. L. M., Ameran and Yasmin, Abdul Wahab and O. M. F., Marwah (2016) Analysis of Crude Palm Oil Composition in a Chemical Process Conveyor using Electrical Capacitance Tomography. Flow Measurement and Instrumentation, 50. pp. 57-64. ISSN 0955-5986. (Published)

E. N., Engku Mat Nasir and Fatinah, Ab Rahman and S., Abd Rahim and Raihana Z., Edros and N., Anuar (2016) Effect on Operating Parameters Towards Metastable Zone Width of Carbamazepine-Saccharin Co-Crystal. In: The 18th International Conference on Crystal Growth and Epitaxy , 07-12 August 2016 , Nagoya, Japan. . (Unpublished)

Edriyana, Abd Aziz and Abdul Syukor, Abd Razak and Suryati, Sulaiman and Hasmanie, Abdul Halim and Islam, Mir Sujaul and N. A., Zainodin and W. A., Wan Omar (2016) The Performance of Coconut Husk and Shell for the Removal of Methyl Red from Aqueous Solution: Adsorption Equilibrium and Kinetic Study. Journal of Engineering and Applied Sciences, 11 (11). pp. 2500-2507. ISSN 1816-949X. (Published)

Edriyana, Abd Aziz and W. A., Wan Omar and Aznilnda, Zainodin and Islam, Mir Sujaul (2016) The Role of Organic Carbon in Natural and Synthetic Oestrogens Sorption onto Soils. International Journal of Environmental Science and Development, 7 (7). pp. 520-524. ISSN 2010-0264. (Published)

Edwind, Liaw Yee Kang (2016) Image based autonomous indoor parallel parking assist on omni-directional vehicle (ODV). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Elhag, Husam Eldin Elhag Abugabr and Ahmad Ziad, Sulaiman and Azilah, Ajit (2016) A Review on the Exraction Methods of Extracts and Phytochemicals from Eurycoma longifolia (Tongkat Ali Jack). In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 253-259..

Ellie Yi, Lih Teo and Lingeswarran, Muniandy and Eng, Poh Ng and Farook, Adam and Abdul Rahman, Mohamed and Rajan, Jose and K. F., Chong (2016) High Surface Area Activated Carbon from Rice Husk as a High Performance Supercapacitor Electrode. Electrochimica Acta, 192. pp. 110-119. ISSN 0013-4686. (Published)

Emma Melati, Buhanuddin (2016) UMP formed partnerships with us universities to reinforce its engineering technology programme. Pekan Review, 11 . pp. 20-21. ISSN 2180-3099

Emma Melati, Burhanuddin (2016) Pertemuan dua hala FTeK - LJM bincang teknologi kejuruteraan. UMP News . (Unpublished)

Emma Melati, Burhanuddin (2016) UMP jalin hubungan baik dengan IPT Amerika Syarikat bagi memperkasa bidang teknologi kejuruteraan. UMP News . (Unpublished)

Emsalem, Faraj Hawege (2016) Performance investigation of water-soluble additives for drag reduction agent in pipelines. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Emyra Ezzaty, Masiren and Noorlisa, Harun and Wan Hanisah, Wan Ibrahim and Fatmawati, Adam (2016) Intermolecular Interaction of Monoethanolamine, Diethanolamine, Methyl diethanolamine, 2-Amino-2-methyl-1-propanol and Piperazine Amines in Absorption Process to Capture CO2 using Molecular Dynamic Simulation Approach. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 385-397..

Engku Norfatima, Engku Dahalan and Azizul Helmi, Sofian and Arman, Abdullah and Norhazilan, Md Noor and Abdul Halim Hadi, Che Mohammad Yahya (2016) Effect of Organic Zinc Coating Layers on Steel Corrosion Behaviour. Australian Journal of Basic and Applied Sciences, 10 (17 (Special)). pp. 40-47. ISSN 1991-8178. (Published)

Eriena, Kamarozaman (2016) Bengkel Pelan Strategik UMP menjana kegemilangan. UMP News . (Unpublished)

Erma Yusnida, Jusoh (2016) Lawan penyakit demi PhD. Sinar Harian . p. 36.

Ernawan, Ferda (2016) A New Psychovisual Threshold Technique in Image Processing Applications. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 9-20.. ISBN 978-967-2054-04-7

Ernawan, Ferda (2016) Robust Image Watermarking based on Psychovisual Threshold. Journal of ICT Research and Applications, 10 (3). pp. 228-242. ISSN 23375787. (Published)

Ernawan, Ferda and Zuriani, Mustaffa and Bayuaji, Luhur (2016) An Efficient Image Compression Using Bit Allocation based on Psychovisual Threshold. Information (Japan), 19 (9B). pp. 4177-4182. ISSN 1343-4500. (Published)

Erny Afiza, Alias (2016) Clarification of anatomical structure and functions in human nasal cavity by airflow patterns. PhD thesis, Tokai University (Contributors, Thesis advisor: Takakura).

Ervina Efzan, Ervina Efzan and Nur Faziera, Mhd Nasir and Siti Rabiatull Aisha, Idris (2016) A Review: Lead Free Solder and Its Wettability Properties. Soldering & Surface Mount Technology, 28 (3). pp. 125-132. ISSN 0954-0911. (Published)

Ezrin Hani, Sukadarin and Baba, M. Deros and Jaharah, A. Ghani and Ahmad Rasdan, Ismail and Nursyazwani, Mohd Nawi and Norhidayah, Abdull (2016) Validity Test For Simple Ergonomics Risk Assessment (SERA) Method. Malaysian Journal of Public Health Medicine, 1 (Suppl.). pp. 134-143. ISSN 1675-0306. (Published)

Ezrin Hani, Sukadarin and Baba, M. Deros and Nur Syazwani, Mohd Nawi and Jaharah, A. Ghani and Ahmad Rasdan, Ismail and Junaidah, Zakaria (2016) A Preliminary Study of Postural Problems among Oil Palm Workers: Is OWAS Method Suitable to Investigate Those Problems? International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 79-90. ISSN 2289-697X. (Published)

Ezrin Hani, Sukadarin and Baba, Md Deros and Nur Syazwani, Mohd Nawi and Jaharah, A. Ghani and Ahmad Rasdan, Ismail and Junaidah, Zakaria (2016) Back Pain and the Observed Factors among Oil Palm Workers. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 70-78. ISSN 2289-697X. (Published)

Ezrin Hani, Sukadarin and Norhidayah, Abdull and Junaidah, Zakaria and Abdullah, Ibrahim (2016) Psychosocial issue among office workers: a case study at a Public Higher Education Institution in Malaysia. The Social Sciences, 11 (18). pp. 4534-4538. ISSN 1818-5800 (Print); 1993-6125 (Online). (Published)

Ezrinda, Mohd Zaihidee and Kamarul Hawari, Ghazali and Almisreb, Ali Abd (2016) Comparison of Human Segmentation using Thermal and Color Image in Outdoor Environment. In: IEEE Conference on Systems, Process and Control (ICSPC 2015) , 18-20 December 2015 , Bandar Sunway, Malaysia . pp. 152-156..

F., Basrawi and Ibrahim, Thamir K. and Khairul, Habib and Yamada, Takanobu (2016) Effect of Operation Strategies on the Economic and Environmental Performance of a Micro Gas Turbine Trigeneration System in a Tropical Region. Energy, 97. pp. 262-272. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

F., Basrawi and Izwan, Ismail and Thamir Khalil, Ibrahim and Daing Mohamad Nafiz, Daing Idris and Shahrani, Anuar (2016) A Study On The Power Generation Potential Of Mini Wind Turbine In East Coast Of Peninsular Malaysia. In: International Tropical Renewable Energy Conference (i-TREC) 2016 , 26-28 October 2016 , Bogor, Indonesia. pp. 1-9.. (Unpublished)

F., Basrawi and M. R. R., Chand and K. H., Koo and Ibrahim, Thamir K. (2016) Theoretical Analysis on the Economic Performance of Micro Gas Turbine-Trigeneration System with Different Operation Strategies for Residential Building in a Tropical Region. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-7., 38 (01003). ISSN 2261-236X

F., Wasbari and R. A., Bakar and Gan, Leong Ming and A. A., Yusof (2016) Simulation of Storage Performance on Hydro-Pneumatic Driveline. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-15..

F., Wasbari and R. A., Bakar and Gan, Leong Ming and Ahmad Anas, Yusof and Zarina, Amat Jafar (2016) Simulation of Storage Performance on Hydropneumatic Driveline in Dual Hybrid Hydraulic Passenger Car. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-13., 90 (01052). ISSN 2261-236X

F., Wasbari and R. A., Bakar and Gan, Leong Ming and M. A., Salim (2016) Feasibility Studies on Utilization of Low-Pressure in Hydro-pneumatic Driveline. Journal of Engineering and Technology (JET), 7 (2). pp. 28-42. ISSN 2180-3811. (Published)

F. A., Fauzi and Kurniawan, Tedi and Y. S., Bin and W. S., Wan Harun (2016) Chromium Enrichment on P11 Ferritic Steel by Pack Cementation. In: MATEC Web of Conferences: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-3., 74 (00036). ISSN 2261-236X

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and Tezara, C. (2016) Investigation of Thermal Behavior for Natural Fibres Reinforced Epoxy using Thermogravimetric and Differential Scanning Calorimetric Analysis. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-7., 78 (01042). ISSN 2261-236X

F. M., Suhaimi and J. G., Chase and G. M., Shaw and Ummu Kulthum, Jamaludin and Normy Norfiza, A. Razak (2016) Prediction of Sepsis Progression in Critical Illness Using Artificial Neural Network. In: International Conference for Innovation in Biomedical Engineering and Life Sciences. IFMBE Proceedings, 56 . Springer, Singapore, pp. 127-132. ISBN 978-981-10-0265-6 (print); 978-981-10-0266-3 (online)

F. R. M., Romlay and Wan Azhar, Wan Yusoff and Kamal Arifin, Mat Piah (2016) Increasing the Efficiency of Traveling Wave Ultrasonic Motor by Modifying the Stator Geometry. Ultrasonics Sonochemistry, 64. pp. 177-185. ISSN 1350-4177. (Published)

Fa, Fu Win (2016) Plastic to fuel : effect of catalyst support for nickel catalst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fadzida, Ismail and Yuserrie, Zainuddin and Norazidah, Shamsudin and Rozana, Sahadan and Ramle, Abid and Saiful Bahri, Ahmad Bakarim (2016) Kajian Impak RTC dan mRTC Pahang. In: Persidangan Kebangsaan Ekonomi Malaysia Ke-11 , 27-28 Julai 2016 , Bandar Baru Bangi, Selangor. pp. 1-10..

Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Mohd Warid, Hussin (2016) Long Term Investigation on Sulphate Resistance of Aerated Concrete Containing Palm Oil Fuel Ash. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2406-2411. ISSN 1819-6608. (Published)

Faisal Abdullah, Sakhar Al Amry (2016) A risk assessment study on electronic voting system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Cheng, Jack Kie).

Faisol, Mustafa (2016) Alumni EC imbau nostalgia zaman sekolah. Mingguan Malaysia . p. 15.

Faiz, Mohd Turan (2016) Incorporating Customer Requirements in Assessing Criteria Based On Triz - A Case Study. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7558-7564. ISSN 1819-6608. (Published)

Faiz, Mohd Turan and Kartina, Johan (2016) Assessing Sustainability Framework Of Automotive-Related Industry in the Malaysia Context Based on GPM P5 Standard. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7606-7611. ISSN 1819-6608. (Published)

Faiz, Mohd Turan and Kartina, Johan and Nik Hisyamudin, Muhd Nor (2016) Criteria Assessment Model for Sustainable Product Development. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-9., 160. ISSN 1757-8981 (Print); 1757-899X (Online)

Faiz, Mohd Turan and Kartina, Johan and Wan Nurul Syahirah, Wan Lanang and Nik Hisyamudin, Muhd Nor (2016) Development of Systematic Sustainability Assessment (SSA) for the Malaysian Industry. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-7., 160 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Faizatul Farhana, Farush Khan (2016) Razif bimbing 50 pelajar UMP. Berita Harian (337). p. 16.

Faizatul Farhana, Farush Khan (2016) Temasya olahraga medan tonjol potensi. Berita Harian . p. 16.

Fakharuddin, Azhar and De Rossi, Francesca and Watson, Trysten M. and Scmidt-Mende, Lukas and Rajan, Jose (2016) Research Update: Behind the High Efficiency of Hybrid Perovskite Solar Cells. APL Materials , 4 (091505). pp. 1-16. ISSN 2166-532X. (Published)

Fakhruddin, Sarmad K. and Abdulbari, Hayder A. and Ahmad Ziad, Sulaiman and Rafeeq, Hind A. (2016) Investigating The Improvement Of Degradation Resistant With The Addition Of SDBS Anionic Surfactant To Peo Polymer. In: 2nd Symposium on Energy Systems (SES 2016) , 22 September 2016 , Pekan, Pahang, Malaysia. pp. 1-6.. (Unpublished)

Farah Amira, Mohd Ghazali and M. N., Ahmad and M. F., Ab. Rahim and Abdul Aziz, Jaafar (2016) Temperature Assessment of Heating Stage for a Thermoforming Equipment. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-7., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Farah Ayuni, Fauzi and Z., Ghazalli and Siregar, J. P. (2016) Investigation of Thermal Behavior for Natural Fibres Reinforced Epoxy using Thermogravimetric and Differential Scanning Calometric Analysis. In: The International Conference on Green Design and Manufacture 2016 , 1-2 May 2016 , Phuket, Thailand. pp. 1-6.. (Unpublished)

Faraj, Moneer A. and Fahmi, Samsuri and Abdalla, Ahmed N. and Damhuji, Rifai and Kharudin , Ali (2016) Construct coil probe using GMR sensor for eddy current testing. In: 2nd Symposium on Energy Systems (SES 2016) , 22 September 2016 , Pekan, Universiti Malaysia Pahang. pp. 1-5..

Farhan, Mohd Said and Nor Farhana, Hamid (2016) Factorial Design Screening For the Red Pigment Production By Monascus Purpureus FTC 535. Jurnal Teknologi, 78 (11-2). pp. 13-17. ISSN 2180-3722. (Published)

Faridah, Taju Rahim and Yuserrie, Zainuddin (2016) Study on the Impact of Linkage Capabilities on Technological Competitive Advantage and Firm Performance in the Automotive Industry in Malaysia. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 285-301..

Faridah, Zulkipli and Zulkifli, Mohd Nopiah and Noor Ezlin, Ahmad Basri and Cheng, Jack Kie (2016) Stock Flow Diagram Analysis on Solid Waste Management in Malaysia. In: AIP Conference Proceedings: The 4th International Conference On Quantitative Sciences And Its Applications (ICOQSIA 2016) , 16–18 August 2016 , Bangi, Selangor, Malaysia. pp. 1-6., 1782 (1). ISBN 978-0-7354-1444-0

Faris Imadi, Ahmad Nadzri (2016) Design and development of sedimentation measurement device for magnetorheological fluid. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Fatchurrohman, Nanang and Suraya, Sulaiman (2016) Solidification Analysis of Aluminium 11.8% Silicon Alloy Reinforced With Titanium Carbide Particulates Produced Using Vortex Mixing - Permanent Mould Casting. In: 10th International Materials Technology Conference & Exhibition (IMTCE 2016) , 16-18 May 2016 , Putra World Trade Centre (PWTC), Kuala Lumpur. . ISSN 2325-0887 (Unpublished)

Fathimah, Abdul Halim and M. S., Najib and Kamarul Hawari, Ghazali and Muhamad Faruqi, Zahari and Abdul Aziz, Mohd Azoddein (2016) Classification of Ammonia Odor-profile Using k-NN Technique. Journal of Electrical, Electronics, Control and Instrumentations Engineering (JEECIE), 1 (9). pp. 42-46. ISSN 2462-2303. (Published)

Fatimah, Dzaharudin and Ummu Kulthum, Jamaludin and Mohd Nazri, Kasuan (2016) Numerical Study on the Effects of a Boundary on the Chaotic Behavior of a Small Cluster of Microbubbles in an Ultrasonic Field. In: 4th International Conference on Mathematical Sciences , 15-17 November 2016 , Putrajaya, Malaysia. . (Unpublished)

Fatin Fazlinda, Hamzah (2016) A study on the factor effecting project delay in the housing construction. Faculty of Industrial Management, Universiti Malaysia Pahang.

Fatin Nabilah, Mohamad Salleh and Nor Shahida , Mohd Shah and Nurul Nadia , Shamsuddin and Siti Nurul Sharina , Mat Yaacob (2016) High Non-Linear Fiber Length Verification in Optical Regeneration using Non-Return Zero and Return Zero Signal. In: National Conference For Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 362-367..

Fatin Nabilah, Mohamad Salleh and Nor Shahida , Mohd Shah and Nurul Nadia , Shamsuddin and Siti Nurul Sharina , Mat Yaacob (2016) Investigation on Fiber Optical Parametric Amplifier (FOPA) Bandwidth using Optisystem. In: National Conference For Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 368-373..

Fatin Nadiah, Kamarudin (2016) The eartquake effect of single storey RC building structure due to surrounding earthquake in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Syazwana, Hashim and H. W., Yussof and Mior Ahmad Khushairi, Mohd Zahari and Rosli Md, Illias and R. A., Rahman (2016) A Factorial Analysis Study on Enzymatic Hydrolysis of Fiber Pressed Oil Palm Frond for Bioethanol Production. In: IOP Conference Series: Earth and Environmental Science, International Conference on Advances in Renewable Energy and Technologies (ICARET 2016) , 23-25 February 2016 , Putrajaya, Malaysia. pp. 1-6., 32 (012071). ISSN 1755-1307 (Print); 1755-1315 (Online)

Fatin Umiayu, Nasaruddin (2016) Rehabilitation support system using shapetapeTM sensor. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Fatin Zulaika, Hasan (2016) Effect on EMG signal from upper limb muscle during conscious and subconscious perception. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Fatin Zulaikha, Mohd Hatanan (2016) The effect of sheet thickness to formability using hyperform. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Fatmawati, Adam (2016) UMP and NUS – a gateway program. Pekan Review, 11 . p. 33. ISSN 2180-3099

Fatmawati, Adam and Siti Hana, A. B. and Saiful Nizam, Tajuddin and M. M., Yusoff (2016) Solvent Role in Molecular Recognition of Patchouli Extraction Process. Asian Journal of Chemistry , 28 (6). pp. 1253-1257. ISSN 1253-1257. (Published)

Fatmawati, Latada (2016) Reliability and Validity of UMP-KI Items. International Journal of Humanities Technology and Civilization (IJHTC), 1. pp. 11-21. ISSN 2289-7216. (Published)

Fatmawati, Latada and Norrihan, Sulan and Amirul Mukmin, Abdullah (2016) Manual kejayaan ibu tunggal: the unsung heroes. Penerbit UMP, Kuantan. ISBN 9789672054306

Fauzan Hanisah, Zulhaimi (2016) Prediction of water stream flow in the context of climate change. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fauzi, Baharudin (2016) Tajaan akhbar digital, lawatan UMP ke pejabat Utusan. Utusan Malaysia . p. 2.

Fauzi, Baharudin (2016) UMP-Utusan perkukuh kerjasama strategik. Utusan Malaysia . p. 4.

Fayaz, Fahim and Ahmad Ziad, Sulaiman and Singh, Sharanjit and Akbari, Sweeta (2016) Influence of CO2 Partial Pressure on Ethanol Dry Reforming Using 5%Ce-10%Co/Al2O3 Catalyst for Hydrogen Production. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 712-716..

Fayaz, Fahim and Danh, Huong T. and Nguyen-Huy, Chinh and Vu, Khanh B. and Bawadi, Abdullah and Vo, Dai-Viet N. (2016) Promotional Effect of Ce-dopant on Al2O3-supported Co Catalysts for Syngas Production via CO2 Reforming of Ethanol. Procedia Engineering, 148. pp. 646-653. ISSN 1877-7058. (Published)

Fazilah, Abdul Aziz and Zakri, Ghazalli and N. M. Zuki, N. M. (2016) Alternative structure of new knowledge-based ergonomics risk assessment system. In: The 4th SEANES International Conference on Human Factors and Ergonomics in South East Asia , 28 November 2016 - 1 Disember 2016 , Bandung, Indonesia. pp. 1-11.. (Unpublished)

Fazleena, Aziz (2016) 'More jobs for TVET grads'. New Straits Times . p. 13.

Fiona Ling, Wang Ming and Abdulbari, Hayder A. and Noraishah, Abdul Latip and Heidarinik, Somaye (2016) Insoluble Nano-powders Additives Enhancing the Flow of Liquid in Microchannel: Effect of Particle Size. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2146-2152. ISSN 1819-6608. (Published)

Firas, D. Ahmed and Mazlina, Abdul Majid and Mohd Sharifuddin, Ahmad and Aws Naser, Jaber (2016) Software Agent And Cloud Computing: A Brief Review. International Journal of Software Engineering & Computer Sciences (IJSECS), 2. pp. 108-113. ISSN 2289-8522. (Published)

Firdaus, Hashim (2016) Pesilat Cina curi tumpuan. Harian Metro . p. 63.

Foo, Weng Kar and Muhammad Afiq, Yusof and Sorooshian, Shahryar and Syed Radzi, Rahamaddulla (2016) Implementation of Total Quality Management and ISO 9000 Certification. International Journal of Engineering Applied Sciences and Technology, 1 (6). pp. 33-36. ISSN 2455-2143. (Published)

Foong, Yuen Kei (2016) Study on reinforced concrete beams strengthened externally using mengkuang leaves-epoxy composite plate. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Gaanty Pragas, Maniam and Nurul Hajar, Embong and Mohd Hasbi, Ab. Rahim and Lee, Keat Teong and Huisingh, Donald (2016) Utilization of Palm Fatty Acid Distillate in Methyl Esters Preparation using SO42/TiO2-SiO2 as a Solid Acid Catalyst. Journal of Cleaner Production, 116. pp. 244-248. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Gaanty Pragas, Maniam and Rehan, Zainol Abidin and Mohd Hasbi, Ab. Rahim (2016) Transesterification of Waste Cooking Oil using Calcium Loaded on Deoiled Spent Bleaching Clay as a Solid Base Catalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 176-181. ISSN 1978-2993. (Published)

Gan, Gek Hian and Suriyati, Saleh and Noor Asma Fazli, Abdul Samad (2016) A generic thermodynamic equilibrium model-based framework for biomass gasification processes. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2222-2229. ISSN 1819-6608. (Published)

Gan, Wei Kang (2016) Design selection of brake disc hybrid aluminium matrix composites reinforced with micro and nano particulates. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Geraldine Chan, Sue Ching (2016) Development of a graphene based immuno-biosensor for hepatitis b virus surface antigen detection. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Giacomo, Francesco Di and Azhar, Fakharuddin and Rajan, Jose and Brown, Thomas M. (2016) Progress, Challenges and Perspectives in Flexible Perovskite Solar Cells. Energy and Environmental Science, 9. pp. 3007-3035. ISSN 1754-5692 (Print); 1754-5706 (Online). (Published)

Gimbun, Jolius (2016) Elucidation of thermal degradation kinetics of Labisia pumila’s polyphenols. , [Research Book Profile: Research Report] (Unpublished)

Goh, Ke Pei (2016) Screening parameters on the biological active compounds of coffee bean mixed with nigella sativa. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Gran, Badshah (2016) Watermarking of single and multi frame ultrasound medical images. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gran, Badshah and Liew, Siau-Chuin and Jasni, Mohamad Zain and Mushtaq, Ali (2016) Watermarking of Ultrasound Medical Images in Teleradiology Using Compressed Watermark. Journal of Medical Imaging, 3 (1). 017001. ISSN 2329-4302 (print); 2329-4310 (online). (Published)

Guni, Geogia and Addie Irawan, Hashim (2016) Identification and Characteristics of Parallel Actuation Robot’s Leg Configuration Using Hammerstein-Wiener Approach. Journal of Electrical, Electronics, Control and Instrumentations Engineering (JEECIE), 1 (10). pp. 48-62. ISSN 2462-2303. (Published)

Gupta, Arun and Kumar, Anuj and Sharma, K. V. and Gupta, Ritu (2016) Application of High Conductive Nanoparticles to Enhance Thermal and Mechanical Properties of Wood Composite. In: International Conference On Advanced Materials and Applications , 15-17 Jun 2016 , BMS college of Engineering, India. . (Unpublished)

H., Hanafi and M. M., Noor and K., Kadirgama and D., Ramasamy (2016) Numerical Modeling on Homogeneous Charge Compression Ignition Combustion Engine Fueled by Diesel-Ethanol Blends. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-9., 74 (00037). ISSN 2261-236X

H., Hanafi and M. M., Noor and M. M., Rahman and K., Kadirgama and D., Ramasamy and C. K., Ihsan and M. K., Kamarulzaman and Y., Selvaraj (2016) Numerical Study of N-Heptane Fuelled Hcci Under Different Air Fuel Ratio and Inlet Air Temperature. In: The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV) 2016 , 1-4 August 2016 , MAI, Cyberjaya. . (Unpublished)

H. D., Setiabudi and N. S. A., Razak and F. R. M., Suhaimi and F. N., Pauzi (2016) CO2 reforming of CH4 over Ni/SBA-15: Influence of Ni-loading methods. Malaysian Journal of Catalysis, 1 (1). pp. 1-6. ISSN 0128-2581. (Published)

H. M., Asnida and Sakinah, Muhamad Hisham and M. M., Noor and K., Kadirgama and D., Ramasamy (2016) Copper (II) Oxide Nanoparticle As Friction Reduction and Anti-Wear Additive In Lubricating Oil. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

H. M., Mahmudul and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah (2016) Impact of Oxygenated Additives to Diesel-Biodiesel Blends in the Context of Performance and Emissions Characteristics of a CI Engine. IOP Conference Series: Materials Science and Engineering, 160 (1). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

H. M., Mahmudul and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah and Awad, Omar I. (2016) Experimental Investigation of the Impact of Using Alcohol-Biodiesel-Diesel Blending Fuel on Combustion of Single Cylinder CI Engine. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-10., 160 (012038). ISSN 1757-8981 (Print), 1757-899X (Online)

Habeeb, Omar Abed and K., Ramesh and Ali, Gomaa A. M. and M. Y. M., Yunus and Thanusha, T. K. and Olalere, Olusegun Abayomi (2016) Modeling and Optimization For H2s Adsorption From Wastewater Using Coconut Shell Based Activated Carbon. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 136-147. ISSN 1991-8178. (Published)

Habeeb, Omar Abed and K., Ramesh and R. M., Yunus and Ahmad, Mani Malam and Olalere, Olusegun Abayomi (2016) Experimental Study of the Effect of PH on the Adsorption Capacity of H2S from Waste Water by Using Calcination of Eggshell as an Adsorbent. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 338-342..

Hadi, Manap (2016) Design and Analysis of A Double Guided Roller for a Jigsaw. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7221-7224. ISSN 1819-6608. (Published)

Hadi, Manap and Mohd Rusllim, Mohamed and M. S., Najib (2016) Lower Detection Limit Enhancement for Low Concentration Ammonia Measurement. Sensors and Actuators B: Chemical, 243. pp. 882-887. ISSN 0925-4005. (Published)

Hadi, Manap and Nor Mazlee, Norazmi and K., Suzalina and M. S., Najib (2016) An Open-Path Optical Fibre Sensor For Ammonia Measurement In The Ultra Violet Region. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10940-10943. ISSN 1819-6608. (Published)

Hadi, Manap and Suzalina, Kamaruddin and M. S., Najib (2016) A Potential Development of Breathing Gas Sensor Using An Open Path Fibre Technique. Microelectronic Engineering, 164. pp. 59-62. ISSN 0167-9317. (Published)

Hafizi, Z. M. and Yusof, Mohd Fadhlan M. and Ghazali, M. F. and Sani, M. S.M. (2016) The application of dynamic pressure sensor based on fiber Bragg grating for monitoring of water supply system. , [Research Report: Research Report] (Unpublished)

Hafizoah, Kassim and Nik Aloesnita, Nik Mohd Alwi and Zailin Shah, Yusoff and Ainol Haryati, Ibrahim (2016) Integrating Task-Based Blended Learning Approach in Teaching Public Speaking. In: International University Carnival On e-Learning (IUCEL 2016) , 19-21 September 2016 , Universiti Teknologi Malaysia, Skudai, Johor. . (Unpublished)

Hafizuddin, Mohamad Shafiee (2016) Hardness and flexural properties of heat treated SKD61 medium carbon steel. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Hafizuddin, Wan Yussof and N., Zainol and Zulsyazwan, Ahmad Khushairi (2016) Optimization of Ferulic Acid Production From Oil Palm Frond Waste Via Enzymatic Hydrolysis Using Soil Culture. In: Conference Proceeding: 6th International Conference On Biotechnology For The Wellness Industry 2016 (ICBWI 2016) , Melaka, Malaysia , 16-17 August 2016. pp. 110-114.. ISBN 978-983-99322-3-2

Hagos, F. Y. and Abd Rashid, A. Aziz and Shaharin, A. Sulaiman (2016) Effect of Injection Timing on Combustion, Performance and Emissions of Lean-burn Syngas (H2/CO) in Spark-Ignition Direct-Injection Engine. International Journal of Engine Research, 17 (9). pp. 921-933. ISSN 1468-0874 (print); 2041-3149 (online). (Published)

Hagos, F. Y. and Abd Rashid, Abd Aziz and Shaharin Anwar, Sulaiman and Mahgoub, Bahaaddein K. M. (2016) Low and Medium Calorific Value Gasification Gas Combustion in IC Engines. In: Developments in Combustion Technology. InTech, Croatia, pp. 1-28. ISBN 978-953-51-2668-3 (Print); 978-953-51-2669-0 (Online)

Hajjar, Husein (2016) A Study on water quality of Galing River,Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hakim, Razak and Fatimah, Mahmud and Fazeeda, Mohamad (2016) Total Quality Management Practices In Malaysian Small and Medium Enterprises. In: International Business Engineering Conference Proceedings , 26-27 September 2016 , Kuala Lumpur, Malaysia. pp. 332-359.. ISBN 9-789670-691916

Halizan, Mohmood (2016) Alumni UMP Zon Utara bertemu perkukuh hubungan. UMP News . (Unpublished)

Hamada, Hussein M. and Ahmad Tarmizi, Haron and Zahrizan, Zakaria and Humada, Ali M. (2016) Challenges and Obstacles of Adoption BIM Technology in the Construction Industry in Iraq. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 43-48..

Hamada, Khalaf I. and M. M., Rahman and D., Ramasamy and M. M., Noor and K., Kadirgama (2016) Numerical Investigation of In-Cylinder Flow Characteristics of Hydrogen-Fuelled Internal Combustion Engine. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1792-1802. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Hamat, A. Malik and M. F., Ghazali and Amin, Makeen and Fatihah, Adnan (2016) Irregularity detection in artificial signal using time-frequency analysis. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3593-3597. ISSN 1819-6608. (Published)

Hamed, Atyaf Khalid and Dewayanto, Nugroho and Du, Dongyu and Mohd Hasbi, Ab. Rahim and Mohd Ridzuan, Nordin (2016) Novel Modified ZSM-5 as an Efficient Adsorbent for Methylene Blue Removal. Journal of Environmental Chemical Engineering, 4 (3). pp. 2607-2616. ISSN 2213-3437. (Published)

Hamed, Atyaf Khalid and Mohd Hasbi, Ab. Rahim and Dewayanto, Nugroho and Du, Dongyu and Mohd Ridzuan, Nordin (2016) Kinetic and Thermodynamics of Methylene Blue Adsorption onto Zero Valent Iron Supported on Mesoporous Silica. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 250-261. ISSN 1978-2993. (Published)

Hamizah, Badiran (2016) Turun bantu gelandangan. Harian Metro . p. 53.

Hamizatun, Mohd Fazi and N. M. Zuki, N. M. and M. F. F., Ab Rashid and A. N. M., Rose (2016) Ergonomics study for workers at food production industry. In: 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute (MAI)Cyberjaya, Selangor. pp. 1-7., 90. ISSN 2261236X

Hammid, Ali Thaeer and Hojabri, Mojgan and M. H., Sulaiman and Abdalla, Ahmed N. and Kadhim, Atheer A. (2016) Load Frequency Control for Hydropower Plants using PID Controller. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 8 (10). pp. 47-51. ISSN 2180-1843. (Published)

Hamzah, Ahmad and Nur Aqilah, Othman (2016) Fuzzy Logic Based EKF for Mobile Robot Navigation: An Analysis of Different Fuzzy Membership Functions. In: 3rd International Multi-Conference on Artificial Intelligence Technology (M-CAIT 2016) , 23-24 August 2016 , Melaka, Malaysia. pp. 1-8..

Hamzah, Ahmad and Nur Aqilah, Othman and Saifudin, Razali and Mohd Razali, Daud (2016) FEKF Estimation for Mobile Robot Localization and Mapping Considering Noise Divergence. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015 , 11-13 October 2015 , Johor Bahru, Johor, Malaysia. .

Hana, Marican and Raihana Z., Edros and Mahadi, Mohammad and Sazlina, Salleh (2016) Antimicrobial Activity of Tropical Soft Corals Found in the Northern Straits of Malacca. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 1-10. ISSN 2289-697X. (Published)

Haque, Muhammad E. and R. A., Bakar and Gan, Leong Ming and Shakaib, M. (2016) Predicting Airflow and Temperature Pattern Inside A Refrigerator Through CFD. ARPN Journal of Engineering and Applied Sciences, 11 (14). 8621 -8628. ISSN 1819-6608. (Published)

Haque, Muhammad E. and R. A., Bakar and K., Kadirgama and M. M., Noor and Shakaib, M. (2016) Performance of a Domestic Refrigerator Using Nanoparticles-Based Polyolester Oil Lubricant. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1778-1791. ISSN 2289-4659. (Published)

Har, Lai Yee (2016) Crystal growth of ZnO bar using joule heating. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Deposition of Electroless Nickel Boron as Printed Circuit Board Surface Finish. Advanced Materials Research, 1133. pp. 391-395. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Influence of Second Reflow on the Intermetallic Compound Growth with Different Surface Finish. Key Engineering Materials, 701. pp. 127-131. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Intermetallic Growth and Shear Strength of SAC305/EN-Boron. Soldering & Surface Mount Technology, 28 (3). pp. 141-148. ISSN 0954-0911. (Published)

Harrydass, Ellapan (2016) CO2 reforming of methane over Zr-promoted Ni/SBA-15 catalyst : effect of zirconium loading. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hartwig, J. B. and Hartwig, J. and S. N., Aqida (2016) X-Ray Topography. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-9. ISBN 978-0-12-803581-8

Hasan, Ahmad (2016) Peniaga tak ikut 'teori' turun naik harga minyak. Berita Harian .

Hasan, Ahmad and Aini, Ahmad (2016) Establishing Halal Lifestyle Term in Clothing: Guideline and Guidance from Islamic Viewpoint. International Journal of Humanities Technology and Civilization (IJHTC), 1. pp. 67-72. ISSN 2289-7216. (Published)

Hasan, Mohammad Mehedi (2016) Numerical investigation on combustion, performance and emissions characteristics in homogeneous charge compression ignition engine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hasany, S. F. and Nour, A. H. and Sunarti, Abd Rahman (2016) Wet Chemical Approach for Vanadium Doped Maghemite (Fe2-xVxO3) Nanocrystals. Current Nanoscience, 12 (5). pp. 617-620. ISSN 1573-4137 (Print); 1875-6786 (Online). (Published)

Hasmadi, Hassan (2016) Teaching and Learning in Industry: How Dominant is the Workers' Attitude in Predicting E-training Readiness? International Journal of Humanities Technology and Civilization (IJHTC), 1. pp. 73-81. ISSN 2289-7216. (Published)

Hasmawani, Hashim and Muhammad Khairul Anuar, Mohamed and Abid, Hussanan and Nazila, Ishak and Norhafizah, Md Sarif and Mohd Zuki, Salleh (2016) Flow and Heat Transfer Analysis of Williamson Viscous Fluid on the Stagnation Point Past a Stretching Surface with Viscous Dissipation and Slip Conditions. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 725-738..

Hasnah, Haron (2016) Study on awareness and perception of CA2010 and MyCC in Malaysia. , [Research Report: Research Report] (Unpublished)

Hasnah, Haron and Ishak, Ismail and Nur Ain Zakiah, Mohd Yusof (2016) Importance of Internal Audit Capability in Management Accounting and Organization Performance. In: New Zealand Management Accounting Symposium 2016 , 24-25 November 2016 , The University of Auckland, New Zealand. pp. 1-33..

Hasnah, Haron and Ishak, Ismail and Yuvaraj, Ganesan and Fathyah, Hashim and Aireen Mak, Siew Fern (2016) Assessment on Internal Audit Capability Level in a Public Sector Organisation. Keeping In Touch, 2016 (Ap-Jun). pp. 13-14.

Hasnah, Haron and Ishak, Ismail and Yuvaraj, Ganesan and Shalene, Kalyanasundaram (2016) Factors Influencing Consumers’ Level of Acceptance of Goods and Services Tax: A Case Of MBA Students. In: Persidangan Kebangsaan Ekonomi Malaysia Ke-11 , 27-28 Julai 2016 , Bandar Baru Bangi, Selangor. pp. 1-11.. (Unpublished)

Hasnah, Haron and Ishak, Ismail and Yuvaraj, Ganesan and Zulhalwati, Hamzah (2016) Audit Exemption for Small and Medium Enterprises: Perceptions of Malaysian Auditors. Asian Academy of Management Journal, 21 (2). pp. 153-182. ISSN 1394-2603 (print); 2180-4184 (online). (Published)

Hasnah, Haron and Lok, Char Lee and Chong, Meng Fong (2016) Corporate Governance And Directors’ Remuneration In Malaysian Public Listed Companies. The Advocate, 2016 (Oct.). pp. 5-6.

Hasnah, Haron and Mohd Ridzuan, Darun and Ishak, Ismail (2016) An Integrated Curriculum in Malaysian Universities: A Conceptual Study. In: International Business Engineering Conference Proceedings , 26-27 September 2016 , Kuala Lumpur, Malaysia. pp. 116-141.. ISBN 9-789670-691916

Hasnah, Haron and Tong, Chue Qun (2016) The Relationship between Internal Audit Characteristic, Audit Committee Characteristic and Interaction between Internal Audit and Audit Committee on Internal Audit Contribution. The Advocate, 2016 (June). pp. 10-11.

Hassan, A. Abdulhadi and S. N., Aqida and M., Ishak and Mohammed, Ghusoon R. (2016) Thermal Fatigue of Die-Casting Dies: An Overview. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00032). ISSN 2261-236X

Hayder Baqer, Mahdi (2016) Effect of ambient temperature on the performance of combined cycle power plant with cooling system in a subtropical region. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hazlina, Faizal (2016) UMP jalin kerjasama dengan Neopeutics dalam bidang bioteknologi. UMP News . (Unpublished)

Hazlina, Faizal (2016) UMP jalin persefahaman dengan Micromidas Inc. UMP News . (Unpublished)

Hazrim, Abdul Karim (2016) Improved strength of peat soil by using kaolin and quicklime stabilizer. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hazriq Izzuan, Jaafar and Mohd Ashraf, Ahmad and Rozaida, Ghazali and A. M., Kassim (2016) Linear and Nonlinear Dynamic Model of a Gantry Crane System. In: Proceedings of Mechanical Engineering Research Day 2016. Centre for Advanced Research on Energy (CARe), Universiti Teknikal Malaysia Melaka, pp. 41-42. ISBN 978-967-0257-70-9 (online)

Hazrulrizawati, Abd Hamid and Mashitah, Mohd Yusoff (2016) Development of chemical markers and chromatographic fingerprint of Clinachantus nutans for evaluation of therapeutic products. , [Research Book Profile: Research Report] (Unpublished)

Hazrulrizawati, Hamid and Izzah Hayati, Yahaya (2016) Cytotoxicity of Clinacanthus Nutans Extracts on Human Hepatoma (HepG2) Cell Line. International Journal of Pharmacy and Pharmaceutical Sciences, 8 (10). pp. 293-295. ISSN 0975–1491. (Published)

Hazrulrizawati, Hamid and Izzah Hayati, Yahaya and M. M., Yusoff and Seema, Zareen (2016) Bioassay-guided Isolation and Antioxidant Activity of Sulfur-containing Compounds from Clinacanthus nutans. Journal of the Chinese Chemical Society, 63 (12). pp. 1033-1037. ISSN 2192-6549. (Published)

Hazwan, Syafiq and A. M. N., Kamarizan and M. F., Ghazali and A. R., Yusoff (2016) Statistical Analysis of Deep Drilling Process Conditions Using Vibrations and Force Signals. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 74 (00002). ISSN 2261-236X

Herwansyah, Lago and Mohd Faizal, Jamlos and Soh, Ping J. and Vandenbosch, Guy A. E. (2016) AMC-integrated reconfigurable beamforming folded dipole antenna with parasitic and RF MEMS. Progress In Electromagnetics Research C, 69. pp. 159-167. ISSN 1937-8718. (Published)

Herwansyah, Lago and Ping, Jack Soh and Mohd Faizal, Jamlos and Nursuriati, Shohaimi and Sen, Yan and Vandenbosch, Guy A. E. (2016) Textile Antenna Integrated with Compact AMC and Parasitic Elements for WLAN/WBAN Applications. Applied Physics A, 122 (1059). pp. 1-6. ISSN 0947-8396 (Print); 1432-0630 (Online). (Published)

Hew, Chan Phang (2016) Effect of solvent : solid ratio, solvent, temperature, time and method on extraction on total phenolic compound from propolis (Trigona Thoracica). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hew, Xiao Jun (2016) Application of bio polymer reinforced with natural fiber for car door panel. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Hidayah, Mahmud (2016) Alumni UMP bantu 55 keluarga daif. Berita Harian . p. 36.

Hind, M. Kh. and Özakça, Mustafa and Ekmekyapar, Talha and Abdolbaqi, Mohammed Khdher (2016) Flexural behavior of concrete beams reinforced with different types of fibers. Computers and Concrete, 18 (5). pp. 999-1018. ISSN 1598-8198. (Published)

Hind, Mahmood Khudhur and Mustafa, Özakça and Abdolbaqi, Mohammed Khdher and Talha, Ekmekyapar (2016) Flexural Performance of PVA Reinforced ECC Beams: Numerical and Parametric Studies. In: National Conference For Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 625-640..

Hisyam, A. and Ismail, N. A. and Mohd Taib, M. K. A. and Shariff, S. (2016) Leaching Study Of Precious Metal Recovery From Ferric Permanent Magnet Waste. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9981-9984. ISSN 1819-6608. (Published)

Ho, Chai Har and Al-Sewari, Abdul Rahman Ahmed Mohammed (2016) Test Cases Minimization Strategy Based On Flower Pollination Algorithm. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 403-408.. ISBN 978-967-2054-04-7

Ho, Wai Kei (2016) Rehabilitation of partially-failed reinforced concrete beam by using aluminium coil. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ho, Xi Cui (2016) Analysis of DNAPL migration in aggregated kaolin and sand using light transmission visualization (LTV) method. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hong, Chi Shein (2016) Production of mesoxalic acid from glycerol oxidation by laccase/2,2,6,6-tetramethylpiperidine-1-oxyl (LACASSE/TEMPO) system : effect of process parameters and kinetic study. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hong, Mee Song (2016) An alternative method to solve combined economic emission dispatch problems using flower pollination algorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Herwan, Sulaiman).

Hong, Pui Khoon and Ndagijimana, Maurice and Betti, Mirko (2016) Glucosamine-induced glycation of hydrolysed meat proteins in the presence or absence of transglutaminase: Chemical modifications and taste-enhancing activity. Food Chemistry, 197. pp. 1143-1152. ISSN 03088146. (Published)

Hor, Chee Heng and Chew, Few Ne (2016) Determination of Green Fluorescent Protein by Ultraviolet-Excited Gel Imaging. Instrumentation Science and Technology, 44 (5). pp. 558-565. ISSN 1525-6030. (Published)

Hossain, M. Anwar and Ayodele, Bamidele V. and Cheng, C. K. and Khan, Maksudur R. (2016) Artificial Neural Network Modeling of Hydrogen-rich Syngas Production from Methane Dry Reforming over Novel Ni/CaFe2O4 Catalysts. International Journal of Hydrogen Energy, 41 (26). pp. 11119-11130. ISSN 0360-3199. (Published)

Hossain, M. Anwar and Ayodele, Bamidele V. and Cheng, C. K. and Khan, Maksudur R. (2016) Syngas Production from Methane Dry Reforming Over 15wt%Ni/85wt%CaFe2O4 Catalyst. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 147-156..

Huei, Ruey Ong and Hegde, Gurumurthy and Vladimir, G. Chigrinov and Khan, Maksudur R. (2016) Sulfuric Disazo Dye Stabilized Copper Nanoparticle Composite Mixture: Synthesis and Characterization. RSC Advances, 6 (18). pp. 15094-15100. ISSN 2046-2069. (Published)

Huei, Ruey Ong and Khan, Maksudur R. and Ridzuan, Ramli and R. M., Yunus and Rahman, Md. Wasikur (2016) Glycerolysis of Palm Oil Using Copper Oxide Nanoparticles Combined With Homogeneous Base Catalyst. New Journal of Chemistry. ISSN 1144-0546. (Published)

Hujainah, Fadhl and Halina, Dahlan and Al-haimi, Basheer and Hujainah, Ammar and Al-Bashiri, Hael and Abdulgabber, Mansoor Abdullateef (2016) New usability guidelines with implementation ways of mobile learning application based on mobile learning usability attributes. Indian Journal of Science and Technology, 9 (37). pp. 1-10. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Hujainah, Fadhl and Rohani, Abu Bakar and Al-haimi, Basheer and Abdullah, Nasser (2016) Analyzing requirement prioritization techniques based on the used aspects. Research Journal of Applied Sciences, 11 (6). pp. 327-332. ISSN 1815-932X. (Published)

Humada, Ali M. and Hojabri, Mojgan (2016) Photovoltaic Grid-Connected Modeling and Characterization Based on Experimental Results. PLoS ONE, 11 (4). pp. 1-13. ISSN 1932-6203. (Published)

Humada, Ali Mahmood and Hojabri, Mojgan and Hamada, Hussein M. and Fahmi, Samsuri and Ahmed, Mushtaq N. (2016) Performance Evaluation of Two PV Technologies (c-Si and CIS) for Building Integrated Photovoltaic based on Tropical Climate Condition: A Case Study in Malaysia. Energy and Buildings, 119 (May). pp. 233-241. ISSN 0378-7788. (Published)

Humada, Ali Mahmood and Hojabri, Mojgan and Mekhilef, Saad and Hamada, Hussein M. (2016) Solar Cell Parameters Extraction Based on Single and Double-Diode Models: A Review. Renewable and Sustainable Energy Reviews, 56. pp. 494-509. ISSN 1364-0321. (Published)

Humaira, Abdul Latif and Noor Azlinna, Azizan and M. R., Abdul Hamid (2016) Exploratory Study of the Awareness on Diabetes Mellitus. In: Proceedings of the 6th IGCESH2016: International Graduate Conference on Engineering, Science and Humanities , 15-17 August 2016 , Universiti Teknologi Malaysia, Johor. pp. 713-715.. ISBN 978-967-0194-67-7

Husniah, Sahamid (2016) Developing critical thinking through Socratic Questioning: An Action Research Study. International Journal of Education & Literacy Studies (IJELS), 4 (3). pp. 62-72. ISSN 2202-9478. (Published)

Husniah, Sahamid and Nor Ashikin, Abdul Aziz and Nor, Syaheeda (2016) Teachers Use of Questioning in the ESL Classroom: Questioning as a Teaching Strategy. Journal of Global Academic Institute Education & Social Sciences, 2 (3). pp. 20-25. ISSN 2375-9577 (Online). (Published)

Hussain, Ahmad and Ali, Shahid and Iqbal, Ahmed and Jolius, Gimbun and Albeirutty, Muhammad H. and Rehan, Zulfiqar Ahmad (2016) Microwave Reinforced Transesterification of Rubber Seed Oil Using Waste Cement Clinker Catalyst. Current Nanoscience, 12 (5). pp. 576-585. ISSN 1573-4137 (Print); 1875-6786 (Online). (Published)

Hussain, H. and Mohd Razelan, Intan Suhana and Law, T. H. and Ahmad Farhan, M. S. (2016) Development of Composite Road Environment Safety Index. Journal of Transportation Safety & Security, 8 (1). pp. 1-17. ISSN 1943-9962 (Print) 1943-9970 (Online). (Published)

Hussanan, Abid (2016) Exact solutions for some types of newtonian and non-newtonian fluids. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hussanan, Abid and Khan, Ilyas and Mohd Zuki, Salleh and Sharidan, Shafie (2016) Slip Effects on Unsteady Free Convective Heat and Mass Transfer Flow with Newtonian Heating. Thermal Science, 20 (6). pp. 1939-1852. ISSN 0354-9836(Print); 2334-7163(Online). (Published)

I. M., Yusri and R., Mamat and Amir, Aziz and Ahmad Fitri, Yusop and Awad, Omar I. and S. M., Rosdi (2016) Investigation of Emissions Characteristics of Secondary Butyl Alcohol-Gasoline Blends in a Port Fuel Spark Ignition Engines. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-12.. (Unpublished)

I. M., Yusri and R., Mamat and Azmi, W. H. and G., Najafi and N. A. C., Sidik and Awad, Omar I. (2016) Experimental Investigation of Combustion, Emissions and Thermal Balance of Secondary butyl alcohol-gasoline Blends in a Spark Ignition Engine. Energy Conversion and Management, 123. pp. 1-14. ISSN 0196-8904. (Published)

I. M., Yusri and R., Mamat and Obed M., Ali and M. K., Akasyah and M. K., Kamarulzaman and C. K., Ihsan and H. M., Mahmudul (2016) The Combustion Of N-Butanol-Diesel Fuel Blends And Its Cycle To Cycle Variability In A Modern Common-Rail Diesel Engine. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2297-2301. ISSN 1819-6608. (Published)

Ibrahim, Thamir K. and Awad, Omar I. and M. Kh., Abdolbaqi (2016) Thermal and Economic Analysis of Gas Turbine Using Inlet Air Cooling System. In: UTP-UMP Symposium on Energy Systems 2016 , 22 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 1-10.. (Unpublished)

Ibrahim, Thamir K. and F., Basrawi and Marwah Noori, Mohammed and Hassan, Ibrahim (2016) Effect Of Perforation Area On Temperature Distribution Of The Rectangular Fins Under Natural Convection. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6371-6375. ISSN 1819-6608. (Published)

Ibrahim, Thamir K. and M. M., Rahman (2016) Effects Of Cycle Peak Temperature Ratio On The Performance Of Combined Cycle Power Plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3389-3400. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ibrahim, Thamir K. and M. M., Rahman and F., Basrawi (2016) Statistical analysis and optimum performance of the gas turbine power plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3215-3225. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ibrahim Khalil, Adam and A. Rashid, A. Aziz and Suzana, Yusup and Morgan, Heikel and Hagos, F. Y. (2016) Optimization of Performance and Emissions of a Diesel Engine Fuelled with Rubber Seed-Palm Biodiesel Blends using Response Surface Method. Asian Journal of Applied Sciences, 4 (2). pp. 401-421. ISSN 2321–0893. (Published)

Ida Rizyani, Tahir and Mazita, Mokhtar and Azizan, Azit and Wan Khairul Anuar, Wan Abdul Manan and Airin, AbdulGhani and Wan Mohd Hafis, Wan Embong (2016) The Relationship Between Organizational Culture and Project Performance. In: International Business Engineering Conference Proceedings , 26-27 September 2016 , Kuala Lumpur, Malaysia. pp. 1-28.. ISSN 9-789670-691916

Iftikhar Yousaf, Muhammad and Muhammad Nubli, Abdul Wahab and Nor Ashikin, Abdul Aziz and Iqbal, Muhammad (2016) Existence of God: Antithetical Themes in “Dr. Faustus” and “Waiting for Godot”. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 22-33..

Iftikhar Yousaf, Muhammad and Muhammad Nubli, Abdul Wahab and Nor Ashikin, Abdul Aziz and Muhammad, Iqbal (2016) A Pilot Study on Measuring the Readers’ Emotions Using HRV Biofeedback at University Malaysia Pahang. International Journal of Applied Linguistics & English Literature, 5 (6). pp. 9-17. ISSN 2200-3592 (Print); 2200-3452 (Online). (Published)

Ikram , Hafiz Mansoor and Rasool, Nasir and Zubair, Muhammad and Khan, Khalid Mohammed and Chotana, Ghayoor Abbas and Akhtar, Muhammad Nadeem and Nadiah, Abu and Noorjahan Banu, Alitheen and Elgorban, Abdallah Mohamed and Rana, Usman Ali (2016) Efficient Double Suzuki Cross-Coupling Reactions of 2,5-Dibromo-3-hexylthiophene: Anti-Tumor, Haemolytic, Anti-Thrombolytic and Biofilm Inhibition Studies. Molecules, 21 (977). pp. 1-11. ISSN 1420-3049 (print); 1420-3049 (online). (Published)

Imaduddin, Abidin and Jamal Rizal, Razali and Anita, Abdul Rani (2016) TRIZ : Strategi pemecahan dan penyelesaian masalah secara tuntas. International Journal of Humanities Technology and Civilization (IJHTC), 1 (2). pp. 83-91. ISSN 2289-7216. (Published)

Imla Syafiqah, Mohd Salleh (2016) Ramah mesra alumni Sarjana Kejuruteraan Kimia dengan Keusahawanan. UMP News . (Unpublished)

Indran, Vidhyaa Paroo and Anisah Sajidah, Haji Saud and Gaanty Pragas, Maniam and Yun Hin, Taufiq-Yap and Mohd Hasbi, Ab. Rahim (2016) Viable Glycerol Carbonate Synthesis Through Direct Crude Glycerol Utilization from Biodiesel Industry. Waste and Biomass Valorization. pp. 1-11. ISSN 1877-2641. (Published)

Intan Alyani Nazirah, Wahgiman (2016) The impact of hypermarket operation to local retailing business in Bukit Gambir, Ledang District, Johor Darul Ta’zim. Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Intan Bazliah, Mohd and Abdullah, Ibrahim (2016) A Case Study of Production Line Balancing With Simulation. International Journal of Industrial Management (IJIM), 2. pp. 15-26. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Intan Bazliah, Mohd and Abdullah, Ibrahim (2016) Composing of Lead Time Reduction Approach in Assembling an Electrical Product. International Journal of Industrial Management (IJIM), 2. pp. 27-39. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Intan Nursyafiqah, Mohamed Hissam (2016) The Effect of Malaysia Goods & Services Tax (GST) to the construction industry. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Intan Shafinaz, Abd Manaf (2016) Transesterification of crude palm oil adsorbed on spent bleaching clay and catfish oil using CaO and ZnO as catalysts. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Intan Shafinaz, Abd Manaf and Nurul Hajar, Embong and Mohd Hasbi, Ab. Rahim and Gaanty Pragas, Maniam (2016) In-Situ Transesterification Of Spent Bleaching Clay Using CaO Supported On ZnO As A Basic Catalyst. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7229-7232. ISSN 1819-6608. (Published)

Intan Yasmin, Ismail (2016) Monitoring of the surface roughness by using acoustic emission analysis during end milling process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Iqbal, AKM Asif and Arai, Yoshio (2016) Analysis of Fatigue Crack Propagation Behaviour in SiC Particulate Al2O3 Whisker Reinforced Hybrid MMC. IOP Conference Series: Materials Science and Engineering, 114 (012115). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Iqbal, AKM Asif and Arai, Yoshio (2016) Stress Measurement During Crack Propagation In Metal Matrix Composites Using Micro-Raman Spectroscopy. In: 17th European Conference on Composite Materials (ECCM17) , 26-30 June 2016 , Munich, Germany. pp. 1-8.. (Unpublished)

Iqbal, AKM Asif and Nuruzzaman, D. M. (2016) Effect of the Reinforcement on the Mechanical Properties of Aluminium Matrix Composite: A Review. International Journal of Applied Engineering Research, 11 (21). pp. 10408-10413. ISSN 0973-4562. (Published)

Irene, Wei Kiong Ting and Hooi, Hooi Lean and Qian, Long Kweh and Noor Azlinna, Azizan (2016) Managerial Overconfidence, Government Intervention and Corporate Financing Decision. International Journal of Managerial Finance, 12 (1). pp. 4-24. ISSN 1743-9132. (Published)

Irene, Wei Kiong Ting and Noor Azlinna, Azizan and Kweh, Qian Long (2016) Managerial Overconfidence and Leverage Decision. The Moderating Effect of Human Governance in Malaysia. Journal for Global Business Advancement (JGBA), 9 (1). pp. 38-51. ISSN 1746-966X (print); 1746-9678 (online). (Published)

Irnie, Zakaria and Azmi, W. H. and A. M. I., Mamat and R., Mamat and R. , Saidur and S. F., Abu Talib and W. A. N., W. Mohamed (2016) Thermal Analysis of Al2O3–water Ethylene Glycol Mixture Nanofluid for Single PEM Fuel Cell Cooling Plate: An Experimental Study. International Journal of Hydrogen Energy, 41 (9). pp. 5096-5112. ISSN 0360-3199. (Published)

Irwan Shafrizan, Ismail (2016) 'Hargai keamanan dikecapi negara kita'. Berita Harian . p. 4.

Irwan Shafrizan, Ismail (2016) TVET tingkat martabat belia. Berita Harian . p. 19.

Isafiq, M. and Shayfull, Z. and Nasir, S. M. and Rashidi, M. M. and Fathullah, M. and Noriman, N. Z. (2016) Shrinkage Analysis on Thick Plate Part using Response Surface Methodology (RSM). In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-8., 78 (01084). ISSN 2261-236X

Ishak, Ismail and Hasnah, Haron (2016) Ethics is all about doing good. New Straits Times . p. 18.

Ishak, Ismail and Hasnah, Haron and Asmawati, Sajari (2016) A Case Study on the Role of Chief Integrity Officer (CIO) as a Control Mechanism in Malaysian Public Sector Organizations. In: New Zealand Management Accounting Symposium 2016 , 24-25 November 2016 , The University of Auckland, New Zealand. pp. 1-27..

Ishmael, Ukaegbu Chinonso (2016) Optimization of pretreatment and saccharification processes of empty fruit bunches (efb) for bioethanol production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ishmael, Ukaegbu Chinonso and Rashid, Shah Samiur and Jaya Vejayan, Palliah and Mohd Fazli, Farida Asras and Sharifah Suhaiza, Nik Wan Ahmad and Ayodele, Bamidele V. (2016) Statistical Modeling and Optimization of Enzymatic Pretreatment of Empty Fruit Bunches with Laccase Enzyme. BioResources , 11 (2). pp. 5013-5032. ISSN 1930-2126. (Published)

Ishmael, Ukaegbu Chinonso and Rashid, Shah Samiur and Nik Sharifah Suhaiza, Nik Wan Ahmad (2016) Optimization of Laccase Enzyme Pretreatment Process Parameters of Empty Fruit Bunches (EFB) Using One-Factor-At-a-Time (OFAT). In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 178-186..

Islam, M. Amirul and Chee, Wai Woon and Baranitharan, E. and Yousuf, Abu and Cheng, C. K. and Khan, Maksudur R. (2016) Evaluation of Electricity Generation and Wastewater Treatment from Palm Oil Mill Effluent Using Single and Dual Chamber Microbial Fuel Cell. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 100-106..

Islam, M. Amirul and Chee, Wai Woon and E., Baranitharan and Cheng, C. K. and Yousuf, Abu and Khan, Maksudur R. (2016) Prolonged Stability of Air-Cathode Microbial Fuel Cell Performance by Inhibiting Aerobic Microbial Growth Using Platinum and Carbon Nanotube (PT-CNT) Nanoparticles as a Cathode Catalyst. In: Proceedings of the 6th IGCESH2016: International Graduate Conference on Engineering, Science and Humanities , 15-17 August 2016 , Universiti Teknologi Malaysia, Johor. pp. 251-253.. ISBN 978-967-0194-67-7

Islam, M. Amirul and Khan, Maksudur R. and Yousuf, Abu and Cheng, C. K. and Woon, Chee Wai (2016) Performance of Klebsiella oxytoca to Generate Electricity from POME in Microbial Fuel Cell. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-6., 38 (03004). ISSN 2261-236X

Islam, M. R. and Beg, M. D. H. (2016) Effects Of Reinforcing Arrangement Of Kenaf Fibres Into Unsaturated Polyester For Improved Properties. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). pp. 2020-2030. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Islam, M. R. and M., Ishak and Luqman Hakim, Ahmad Shah and Siti Rabiatull Aisha, Idris and Meric, C. (2016) Dissimilar Welding Of A7075-T651 and AZ31B Alloys by Gas Metal Arc Plug Welding Method. The International Journal of Advanced Manufacturing Technology, 88 (9). pp. 2773-2783. ISSN 0268-3768(Print); 1433-3015(Online). (Published)

Islam, Md Shaharul and Mandal, Bablu Hira and Biswas, Tapan Kumar and Lutfor, M. R. and Rashid, S. S. and Tan, Suat Hian and Sarkar, Shaheen M. (2016) Poly(hydroxamic acid) Functionalized Copper Catalyzed C–N Bond Formation Reactions. RSC Advances, 6. pp. 56450-56457. ISSN 2046-2069. (Published)

Islam, Md. Amirul and Khan, Maksudur R. and Yousuf, Abu and Woon, Chee Wai and Cheng, C. K. (2016) Electricity Generation form Pretreated Palm Oil Mill Effluent Using Klebsiella Variicola as an Inoculum in Microbial Fuel Cell. In: 4th International Conference on the Development in the in Renewable Energy Technology (ICDRET 2016) , 7-9 January 2016 , United International University, Dhaka, Bangladesh. pp. 1-4..

Islam, Mir Sujaul and Arafat, Md. Yasir and Zularisam, A. W. and Mohamad Idris, Ali (2016) Status of Contamination and Distribution of Effluents in Tasik Chini, Pahang, Malaysia. International Journal of Ecology and Environmental Sciences, 42 (3). pp. 201-208. ISSN 2320-5199. (Published)

Islam, Mir Sujaul and B. S., Ismail and M. A., Tayeb (2016) Hydrology and Sediment Loading in a Degrading Natural Lake System in Malaysia. Environmental Earth Sciences, 75 (231). pp. 1-7. ISSN 1866-6299. (Published)

Islam, Mir Sujaul and B. S., Ismail and M. A., Tayeb and Muhammad Barzani, Gasim and Sahibin, Abd. Rahim (2016) Morphological and Physico-Chemical Characteristics of Soils in the Tasik Chini Catchment in Pahang, Malaysia. Pertanika Journal of Science & Technology (JST), 24 (1). pp. 71-87. ISSN 0128-7680. (Published)

Ismail, Ibrahim (2016) Multi-state PSO GSA for solving discrete combinatorial optimization problems. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ismail, Ibrahim and Zuwairie, Ibrahim and Hamzah, Ahmad and Zulkifli, Md. Yusof (2016) An Assembly Sequence Planning Approach with a Multi-State Particle Swarm Optimization. In: Trends in Applied Knowledge-Based Systems and Data Science. Lecture Notes in Computer Science, 9799 . Springer International Publishing, Switzerland, pp. 841-852. ISBN 978-3-319-42006-6

Ismail, Mohd Khairuddin and Zahari, Taha and Anwar, P. P. Abdul Majeed and Abdel Hakeem, Deboucha and Mohd Azraai, M. Razman and Abdul Aziz, Jaafar and Zulkifli, Mohamed (2016) A Hybrid Joint Based Controller for an Upper Extremity Exoskeleton. Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-899X. (Published)

Ismail Ali, Hj Abdul Aziz and D. M. N., D. Idris and Wafiuddin, Md Ghazali (2016) Investigating Bending Strength of Spur Gear : A Review. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01037).

Ismed, Iskandar (2016) Competing Risk Models in Reliability Systems, A Gamma Distribution Model with Bayesian Analysis Approach. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-7., 114 (012098).

Iswan Akim, Ismail (2016) Pameran legasi kepimpinan Tun Abdul Razak & Dato' Sri Mohd Najib Tun Haji Abdul Razak. Wadah (1). pp. 7-8. ISSN 2180-0456

Iswan Akim, Ismail (2016) Perpustakaan UMP jadi tumpuan pamer Legasi Kepimpinan. UMP News . (Unpublished)

Izan Izwan, Misnon (2016) Development of supercapacitors with in-situ polymerized polyaniline on MnO2 and Co3O4 anodes and activated carbon cathodes. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Izham, Jaafar (2016) Golf amal UMP. Mingguan Malaysia . p. 2.

Izzat, Nazar (2016) Mechanical behaviour of polymer based bamboo composite 1. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Izzuddin, Bassam A. and Jokhio, Gul A. (2016) Mixed-Dimensional Coupling for Parallel Partitioned Nonlinear Finite-Element Analysis. Journal of Computing in Civil Engineering, 31 (3). pp. 1-13. ISSN 0887-3801. (Published)

Izzudin, Nazar (2016) Analysis of wear on abrasive water jet nozzle. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

J. A., Ghani and C. H., Che Haron and Mohd Shahir, Kasim and Mohd Amri, Sulaiman and Siti Haryani, Tomadi (2016) Wear Mechanism of Coated and Uncoated Carbide Cutting Tool in Machining Process. Journal of Materials Research, 31 (13). pp. 1873-1879. ISSN 0884-2914 (print); 2044-5326 (online). (Published)

Jaber, Aws Naser and Mohamad Fadli, Zolkipli and Othman, Hanshal (2016) A Conceptual Model Using The Elliptic Curve Diffie–Hellman With An Artificial Neural Network Over Cloud Computing. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 534-540..

Jaber, Aws Naser and Mohamad Fadli, Zolkipli and Shahid, Anwar and Al-Hawawreh, Muna Sulieman (2016) Present Status and Challenges in Cloud Monitoring Framework: A Survey. In: IEEE European Intelligence and Security Informatics Conference (EISIC 2016) , 17-19 August 2016 , Uppsala, Sweden . p. 201.. ISBN 978-1-5090-2857-3

Jamal Rizal, Razali and Imaduddin, Abidin (2016) Dialek Keturunan Tok Linggi dalam Kerangka Kearifan Tempatan. International Journal of Humanities Technology and Civilization (IJHTC), 1 (2). pp. 92-105. ISSN 2289-7216. (Published)

Jamil, Zulkeple (2016) Mechanical behaviour of polymer based bamboo composite 2. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Jamilah Bebe, Mohamad (2016) Amalan Sosiobudaya Di Dalam Novel Terjemahan Terpilih Harry Potter: Analisis Wacana Kritis. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 490-504..

Jamilah Bebe, Mohamad and Anis Nabilla, Ahmad and Jamal Rizal, Razali (2016) Faktor-faktor Keterancaman Budaya Material Masyarakat Orang Asli Che Wong. Journal of Education and Social Sciences, 5 (2). pp. 307-317. ISSN 2289-1552. (Published)

Jamilah Bebe, Mohamad and Nursyaheedah, Muhammad Isa and Rosjuliana Hidayu, Rosli (2016) A day of cultural exchange - discover the beauty of the Prophet’s language. Pekan Review, 11 . p. 55. ISSN 2180-3099

Jamiluddin, Jaafar and J. P., Siregar and A., Sulaiman and K. A. A., Jalal and Tezara, C. (2016) Study on Properties of Tapioca Resin Polymer. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3178-3189. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Jarial, Rini and Singh, Lakhveer and Thakur , Sevta and Zularisam, A. W. and Mimi Sakinah, A. M. and Kanwar, S. S. (2016) Applications of Fern Dipteris Conjugate in Anti-bacterial and Anti-lipolytic Purpose. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 775-782..

Jasri, Mohamad (2016) A New Tool to Acquire Sheet Metal Cyclic Plasticity Data for Hardening Models. In: Conference Proceedings: International Conference On Materials Science, Metal & Manufacturing (M3 2016) , 18-19 January 2016 , Singapore. pp. 94-100.. ISSN 2251-1857

Jasri, Mohamad and Wan Iryana, Wan Md Nor (2016) Reliability of Isotropic Model in Finite Element Simulation to Predict Wrinkling in Deep Drawing Process. In: MATEC Web of Conferences: 7th International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2016) , 1-3 February 2016 , Cape Town, South Africa. pp. 1-4., 54 (03003). ISSN 2261-236X

Jaya Vejayan, Palliah (2016) Adverse Effects of Tannin Contained in Mimosa pudica Root Extract. Journal of Applied Sciences, 16 (10). pp. 477-483. ISSN 1812-5654 (print); 1812-5662 (online). (Published)

Jaya Vejayan, Palliah (2016) Tongkat Ali: Pusaka bumi di persada dunia. Wadah (2). pp. 12-13. ISSN 2180-0456

Jaya Vejayan, Palliah (2016) The application of proteins from less likely studied samples from South East Asia. In: 7th International Conference and Exhibition on Analytical & Bioanalytical Techniques , 28-30 September 2016 , Orlando, USA. p. 1., 7 (5). ISSN 2155-9872

Jayshree, Thraisingam and Gupta, Arun and Malini, Subramaniam (2016) Natural Rubber Latex (NRL) and Rice Starch as an Alternative Binder in Wood Composite Industry. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 101-106. ISSN 1991-8178. (Published)

Jessie, Tiong Kung Yen (2016) Peat soil treatment using transformed egg shells (tes) as chemical stabilizer. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Jolius, Gimbun and Liew, Shi Yan and Nagy, Zoltan K. and Rielly, Chris D. (2016) Three-Way Coupling Simulation of a Gas-Liquid Stirred Tank using a Multi-Compartment Population Balance Model. Chemical Product and Process Modeling, 11 (3). pp. 205-216. ISSN 1934-2659. (Published)

Jose, Rajan and Misnon, Izan Izwan and Ismail, Jamil (2016) Tailoring the electrochemical propertiesof titanium dioxide for high performance energy storage device. , [Research Report: Research Report] (Unpublished)

Joyce, Ting Shu Qian (2016) Behaviour of reinforced concrete beams strengthened externally using pineapple leaf fibre (PALF) epoxy composite plate. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ju, Meng and Wang, Yuexin and Yong, Ying Mei (2016) A study on Chinese culture learning among non-Chinese students in Malaysia. In: International Conference on Teaching Mandarin as a Second Language in Malaysia , 5 - 6 November 2016 , Kong Zi Institute, University of Malaya, Kuala Lumpur, Malaysia. .

Juliana, Ali (2016) Ketua Pegawai Eksekutif TNB dilantik jayakan CEO@Faculty Programme. CREATE . p. 14. ISSN 1823-7487

Juliana, Junaidi (2016) Solid waste management in building construction site. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Juliana, Md Nor (2016) The importance of reliability of machine on operational improvement : a case study. Faculty of Industrial Management, Universiti Malaysia Pahang.

Juliawati, Alias (2016) The influence of hot forming-quenching (HFQ) on the microstructure and corrosion performance of AZ31 magnesium alloys. PhD thesis, University of Manchester (Contributors, UNSPECIFIED: UNSPECIFIED).

K., Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri (2016) Thermal Conductivity Enhancement of TiO2 Nanofluid in Water and Ethylene Glycol (EG) Mixture. Indian Journal of Pure & Applied Physics, 54. pp. 651-655. ISSN 0975-1041. (Published)

K., Yusoh (2016) Scratch Property of Polyurethane Nanocomposites Studied by Nanoindentation. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015 , 11-13 October 2015 , Johor Bahru, Johor, Malaysia. pp. 1-6.. ISSN 1819-6608

K. A., Hamid and Azmi, W. H. and R., Mamat and K. V., Sharma (2016) Experimental Investigation on Heat Transfer Performance of TiO2 Nanofluids in Water-Ethylene Glycol Mixture. International Communications in Heat and Mass Transfer, 73. pp. 16-24. ISSN 0735-1933. (Published)

K. H., Mah and Wan Mohd Hafizuddin, Wan Yussof and Mazrul Nizam, Abu Seman and A. W., Mohammad (2016) Separation of Xylose Using a Thin-Film Composite Nanofiltration Membrane: Screening of Interfacial Polymerization Factors. RSC Advances, 6 (73). pp. 69454-69464. ISSN 2046-2069. (Published)

K. I., Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris (2016) The Effect of Shielding Gas Flow Rate on Fiber Laser Welding of Boron Steel. In: 3rd TMAC Symposium 2016 , 28 Feb - 1 March 2016 , UTEM Melaka. pp. 1-5.. (Unpublished)

K. M., Ahmad and Mohd Rashidi, Maarof and M., Ishak and M. S., Huzairi (2016) Microstructure and Mechanical Properties of Austenitic Compacted Cast Iron with Additive Manganese. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 74 (00009). ISSN 2261-236X

K. V., Sharma and Azmi, W. H. and Kamal, Subhash and Sarma, P. K. and Vijayalakshmi, Bathula (2016) Theoretical Analysis of Heat Transfer and Friction Factor for Turbulent Flow of Nanofluids through Pipes. The Canadian Journal of Chemical Engineering, 94 (3). pp. 565-575. ISSN 1939-019X. (Published)

K. V., Sharma and Azmi, W. H. and Kamal, Subhash and Suhaimi, Hasan (2016) Numerical Analysis of Experimental Turbulent Forced Convection Heat Transfer for Nanofluid Flow in a Tube. Applied Mechanics and Materials, 819. pp. 132-141. ISSN 1662-7482. (Published)

Kaaliarasan, Ramachandran and Balakumaran, Yeesvaran and K., Kadirgama and D., Ramasamy and S. A., Che Ghani and Keeran, Anamalai (2016) State of Art of Cooling Method for Dry Machining. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90.

Kadhim, Nassir and Mohammed, Muamer N. and Mazlina, Abdul Majid and Mohamd, Sinan Q. and Tao, Hai (2016) An Efficient Route Selection based on AODV Algorithm for VANET. Indian Journal of Science and Technology, 9 (38). pp. 1-6. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Kahtan, Hasan and Nordin, Abu Bakar and Rosmawati, Nordin and Abdulgabber, Mansoor Abdullateef (2016) 2DCBS: A Model for Developing Dependable Component-Based Software. Mathematics & Computer Science . pp. 1-30. (Published)

Kamal Z., Zamli (2016) A Chaotic Teaching Learning Based Optimization Algorithm for Optimization Emergency Flood Evacuation Routing. In: International Symposium of Information and Internet Technology , 26 - 28 Jan 2016 , Melaka. .

Kamal Z., Zamli and Alkazemi, Basem Y. and Kendall, Graham (2016) A Tabu Search Hyper-Heuristic for t-way Test Suite Generation. Applied Soft Computing, 44. pp. 57-74. ISSN 1568-4946. (Published)

Kamal Z., Zamli and Alsariera, Yazan A. (2016) TBat: A Novel Strategy for Minimization of T-Way Interaction Test Suite Based on the Particle Swarm Optimization and the Bat Algorithm. In: The Invention & New Product Exposition (INPEX) 2016 , 7-9 June 2016 , Pittsburgh, United States of America. p. 1..

Kamal Z., Zamli and Alsariera, Yazan A. and Nasser, Abdullah B. (2016) Benchmarking of Bat-inspired Interaction Testing Strategy. International Journal of Computer Science and Information Engineering (IJCSIE), 7 (1). pp. 71-79. ISSN 0976-626X. (Published)

Kamal Z., Zamli and Alsewari, Abdulrahman A. (2016) Search based software testing. Penerbit UMP, Kuantan, Pahang. ISBN 9789672054344

Kamaliah, Abdul Samad and N., Zainol (2016) Release of Ferulic Acid from Banana Stem Waste by Ferulic Acid Esterase from Co-culture. International Research Journal of Engineering and Technology (IRJET), 3 (8). pp. 819-823. ISSN 2395-0072 (Print); 2395 -0056 (Online). (Published)

Kamaliah, Abdul Samad and N., Zainol and Nur Syahirah, Mohd Shkuri (2016) Development of Soil Co-Culture System for Ferulic Acid Production. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2253-2257. ISSN 1819-6608. (Published)

Kamariah, Gono (2016) Perkongsian maklumat & kursus asas pengurusan perpustakaan. Wadah (1). p. 8. ISSN 2180-0456

Kamariah, Gono (2016) Sumbangan perpustakaan dalam penarafan universiti. Wadah (1). pp. 9-10. ISSN 2180-0456

Kamarul Hawari, Ghazali and Nurul Wahidah, Arshad and Faradila, Naim and Rohana, Abdul Karim and Nor Farizan, Zakaria and Mohd Falfazli, Mat Jusof and Nazriyah, Che Zan@Zain and Rosyati, Hamid and Lailatul Niza, Muhammad (2016) Computer vision system. Penerbit UMP, Kuantan. ISBN 9789670691992

Kamil, Mohammed and M. M., Rahman and R. A., Bakar (2016) Development of a Complete Single Jet Common Rail Injection System Gas Dynamic Model for Hydrogen Fueled Engine with Port Injection Feeding System. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (6). pp. 976-984. (Published)

Kamil Zakwan, Mohd Azmi and Zulkifli, Md. Yusof and Siti Nurzulaikha, Satiman and Badaruddin, Muhammad and Saifudin, Razali and Zuwairie, Ibrahim and Nor Azlina, Ab. Aziz and Nor Hidayati, Abd Aziz (2016) Solving Airport Gate Allocation Problem Using Angle Modulated Simulated Kalman Filter. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 875-885..

Kanchana, Manirajah (2016) Evaluation of activated carbon from waste tyre for the adsorption of 2-chlorophenol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kartina, Johan and Faiz, Mohd Turan (2016) The Development of Sustainability Graduate Community (SGC) as a Learning Pathway for Sustainability Education - a Framework for Engineering Programmes in Malaysia Technical Universities Network (MTUN). In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-7., 160 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Kartina, Johan and Faiz, Mohd Turan (2016) Industrial Training Approach using GPM P5 Standard for Sustainability in Project Management: A Framework for Sustainability Competencies in the 21st Century. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-6., 160 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Kaviraj, Anbarasan (2016) Comparison of activation processes of activated carbon in removing pollutiants from palm oil mill effluents. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Kelvin, Lazarus and Nurul Hazlina, Noordin and Kamil Zakwan, Mohd Azmi and Nor Hidayati, Abdul Aziz and Zuwairie, Ibrahim (2016) Adaptive Beamforming Algorithm based on Generalized Opposition-based Simulated Kalman Filter. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 1-9..

Keong, Stephanie Wei San (2016) Effect of nonmagnetic PbO nanoparticles addition on the microstructure and electrical transport properties of YBa2Cu3O7. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Keream, Settar S. and Abdalla, Ahmed N. and Frayyeh, Hatem Fahad and Mohd Razali, Daud (2016) Three Phase Induction Motor Torque Ripple Minimization Based On a Novel Nonlinear Dynamic Inverse Controller. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 321-329..

Keream, Settar S. and Abdalla, Ahmed N. and Mohd Razali, Daud and Koh, Johnny (2016) Dynamic inverse controller with Matrix Converter Drive Feed Three Phase Induction Motor. In: UTP-UMP Symposium on Energy Systems 2016 , 22 September 2016 , Universiti Malaysia Pahang (UMP). pp. 1-15.. (Unpublished)

Kettner, M. and Dechent, S. and Hofmann, M. and Huber, E. and Arruga, H. and R., Mamat and G., Najafi (2016) Investigating the Influence of Water Injection on the Emissions of a Diesel Engine. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1863-1881. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Khairil Ashraff, Ab Rahim and Zainah, Md. Zain and Nurfadzillah, Harun and Maziyah, Mat Noh (2016) Hull Design for ROV with Four Thrusters (X4-ROV). In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 157-164..

Khairul Bariyah, Abd Hamid and Mohd Armi, Abu Samah and Kamaruzzaman, Yunus and Afiza, Abdullah Suhaimi (2016) An Overview on Rare Earth Management in Malaysia. Journal of Malaysian Critical Metals, 1. pp. 25-30. ISSN 0128-2557. (Published)

Khairunisa, Muthusamy and Nurul Nadrah Aqilah, Tukimat (2016) Exploratory Study on the Use of Crushed Cockle Shell as Partial Sand Replacement in Concrete. International Journal of Research in Engineering and Science, 4 (2). pp. 67-71. ISSN 2320-9356. (Published)

Khairunnisa, Muhammad Husain (2016) A Study of optimum oil palm frond (OPF) ratio in cement sand brick. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Khalaf, Emad Taha and Mohammed, Muamer N. and Norrozila, Sulaiman (2016) Iris template protection based on enhanced hill cipher. In: International Conference on Communication and Information Systems , 16-18 December 2016 , Bangkok, Thailand. pp. 53-57.. ISBN 978-1-4503-4791-4

Khalid Adam, Ismail Hammad and Jasni, Mohamad Zain and Mazlina, Abdul Majid and Noor Akma, Abu Bakar (2016) Big Data Prediction Framework for Weather Temperature Based on MapReduce Algorithm. In: Conference on Open Systems (ICOS) , 10-12 October 2016 , Langkawi. pp. 13-17.. ISSN 24733660 ISBN 9781509026036

Khalid Hassan, Mohamed Edris (2016) Robust image watermarking techniques using image features. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khamisah, Abdul Hamid (2016) Experimental investigation on forced convection heat transfer of water - ethylene glycol based TIO2 nanofluid. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khan, Ilyas and Abid, Hussanan and Mohd Zuki, Salleh and Razman, Mat Tahar (2016) Exact Solutions of Accelerated Flows for a Generalized Burgers' Fluid, I: The Case. In: Proceedings of the 4th International Conference on Computer Science & Computational Mathematics (ICCSCM 2015) , 7-8 May 2015 , Langkawi, Malaysia. pp. 47-52..

Khan, Maksudur R. and E., Baranitharan and D. M. R., Prasad and Cheng, C. K. (2016) Fast Biofilm Formation and Its Role on Power Generation in Palm Oil Mill Effluent Fed Microbial Fuel Cell. In: MATEC Web of Conferences: 3rd International Conference on Chemical and Food Engineering , 8-9 April 2016 , Tokyo, Japan. pp. 1-6., 62 (04002). ISSN 2261-236X

Khan, Maksudur R. and Rahman, Md. Wasikur and Mozumder, Md. Salatul Islam and Ferdous, Kaniz and Ong, Huei Ruey and Chan, Kar Min and Prasad, D. M. Reddy (2016) Performance of a Submerged Adsorption Column Compared with Conventional Fixed-bed Adsorption. Desalination and Water Treatment, 57 (21). pp. 9705-9717. ISSN 1944-3994. (Published)

Khan, Maksudur R. and Rahman, Md. Wasikur and Ong, Huei Ruey and Ainihayati, Ismail and Cheng, C. K. (2016) Tea Dust as a Potential Low-Cost Adsorbent for the Removal of Crystal Violet from Aqueous Solution. Desalination and Water Treatment, 57 (31). pp. 14728-14738. ISSN 1944-3994. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and Salehina, Zayed Us and Rahman, Md. Saifur (2016) Optimal Set-up and Surface Finish Characteristics in Electrical Discharge Machining on Ti-5al-2.5sn using Graphite. Perspectives in Science, 8. pp. 440-443. ISSN 2213-0209. (Published)

Khan, Musaddiq Majid (2016) جوانب الرحمة في حقوق غير المسلمين في المجتمع الإسلامي: الدستور الأول للإسلام نموذجًا = Aspek Kasih Sayang Dalam Hak Orang Bukan Islam dalam Masyarakat Islam : Perlembangaan Pertama Model Islam (Kajian, Deskriptif, Analisis). مجلة جيل حقوق الإنسان = Jurnal Generasi Hak Asasi Manusia, 3 (12). pp. 15-28. ISSN 2311-3650. (Published)

Khan, Musaddiq Majid (2016) Distinguished Approach of Qur’aic Invocation. Al-Azwa, 31 (46). pp. 1-20. ISSN 1995-7904. (Published)

Khan, Musaddiq Majid (2016) Qur'ānic Methodology for Religious Vocation. In: Proceedings of International Conference on Language, Education and Civilization , 24-25 May 2016 , Ipoh, Perak, Malaysia. pp. 641-656., 1 (1). ISBN 978-967-5741-40-1

Kharsah, Wael Sahdo and Fatmawati, Latada (2016) The Correlation between Levels of Self-Esteem, University Commitment and Academic Performance among Undergraduate Students. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 200-205..

Khatun, Fatema and Monir, Md. Minhaj Uddin and Arham, S. M. Nafefun and Zularisam, A. W. (2016) Implementation of Carbon Dioxide Gas Injection Method for Gas Recovery at Rashidpur Gas Field, Bangladesh. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 52-61. ISSN 2289-697X. (Published)

Khi, Khim Beh and Fahmi, Samsuri and Tze, Pin Lee and Khairudin, Mohamed (2016) The Fabrication of PDMS mould for Microelectrode Array Biochip using NIL. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-11., 114 (213001). ISSN 1757-8981 (Print), 1757-899X (Online)

Khoo, Chun Keong and Mahfuzah, Mustafa and Ahmad Johari, Mohamad and M. H., Sulaiman and Nor Rul Hasma, Abdullah (2016) Artificial Neural Network Flood Prediction for Sungai Isap Residence. In: 2016 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS2016). , 22 October 2016 , Shah Alam, Malaysia. pp. 1-6.. (Unpublished)

Khoo, Chun Keong and Mahfuzah, Mustafa and Ahmad Johari, Mohamad and M. H., Sulaiman and Nor Rul Hasma, Abdullah and Rosdiyana, Samad and Pebrianti, Dwi (2016) Levenberg-Marquardt Flood Prediction for Sungai Isap Residence. In: IEEE Conference on System, Process and Control (ICSPC 2016) , 16-18 December 2016 , Swiss-Garden Hotel & Residences Melaka. pp. 1-6.. (Unpublished)

Khor, Ai Chia and Mohd Rusllim, Mohamed and M. H., Sulaiman and Hamdan, Daniyal and A. N., Oumer and P. K. , Leung (2016) Numerical Investigation on Serpentine Flow Field and Rhombus Electrolyte Compartment of Vanadium Redox Flow Battery (V-RFB). ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6715-6720. ISSN 1819-6608. (Published)

Khor, Hui Liang and Liew, Siau-Chuin and Jasni, Mohamad Zain (2016) Parallel Digital Watermarking Process on Ultrasound Medical Images in Multicores Environment. International Journal of Biomedical Imaging, 2016 (958372). pp. 1-14. ISSN 1687-4188 (Print); 1687-4196 (Online). (Published)

Koay, Boon Hui (2016) A study of lean six sigma implementation on improving automotive operational performance. Faculty of Industrial Management, Universiti Malaysia Pahang.

Koh, Rui Shuan (2016) Sulphide removal using phytoremediation process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Koh, Zhi Yuan (2016) Flexural behavior of reinforced concrete beam with variation of coated reinforcement. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kozaki, Daisuke and Mohd Hasbi, Ab. Rahim and Wan Faizal, Wan Ishak and M. M., Yusoff and Mori, Masanobu and Nakatani, Nobutake and Tanaka, Kazuhiko (2016) Assessment of the River Water Pollution Levels in Kuantan, Malaysia, Using Ion-Exclusion Chromatographic Data, Water Quality Indices, and Land Usage Patterns. Air, Soil and Water Research, 9. pp. 1-11. ISSN 1178-6221. (Published)

Krishnan, Santhana and Singh, Lakhveer and Mimi Sakinah, A. M. and Thakur, Sveta and Zularisam, A. W. and Alkasrawi, Malek (2016) Process Enhancement of Hydrogen And Methane Production from Palm Oil Mill Effluent Using Two-Stage Thermophilic and Mesophilic Fermentation. International Journal of Hydrogen Energy, 41 (30). pp. 12888-12898. ISSN 0360-3199. (Published)

Krishnan, Syam G. and Archana, P. S. and Vidyadharan, Baiju and Izan Izwan, Misnon and Vijayan, Bincy Lathakumary and Nair, V. Manikantan and Gupta, Arunava and Rajan, Jose (2016) Modification of Capacitive Charge Storage of TiO2 with Nickel Doping. Journal of Alloys and Compounds, 684. pp. 328-334. ISSN 0925-8388 (print); 1873-4669 (online). (Published)

Krishnan, Syam G. and Harilal, Midhun and Mohd Hasbi, Ab. Rahim and Rajan, Jose (2016) Hydrothermal Synthesis of α-MnO2 Nanorods and its Electrochemical Characterization for Supercapacitor Applications. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 1-6..

Krishnan, Syam G. and Mohd Hasbi, Ab. Rahim and Rajan, Jose (2016) Synthesis and Characterization of MnCo2O4 Cuboidal Microcrystals as a High Performance Psuedocapacitor Electrode. Journal of Alloys and Compounds, 656. pp. 707-713. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2016) Bioelectricity Generation and Treatment of Sugar Mill Effluent Using a Microbial Fuel Cell. Journal of Clean Energy Technologies, 4 (4). pp. 249-252. ISSN 1793-821X. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2016) Development of a Metal Oxide Cathode Catalyst for Aircathode Microbial Fuel Cells. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 700-703..

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2016) Exoelectrogens: Recent Advances in Molecular Drivers Involved in Extracellular Electron Transfer and Strategies used to Improve it for Microbial Fuel Cell Applications. Renewable and Sustainable Energy Reviews, 56. pp. 1322-1336. ISSN 1364-0321. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. and Hai, Faisal I. (2016) Potential of Porous Co3O4 Nanorods as Cathode Catalyst for Oxygen Reduction Reaction in Microbial Fuel Cells. Bioresource Technology, 220. pp. 537-542. ISSN 0960-8524. (Published)

Kuppusamy, Palaniselvam and Ichwan, Solachuddin J. A. and Putri Nur Hidayah, Al-Zikri and Wastuti Hidayati, Suriyah and Soundharrajan, Ilavenil and Natanamurugaraj, Govindan and Gaanty Pragas, Maniam and M. M., Yusoff (2016) In Vitro Anticancer Activity of Au, Ag Nanoparticles Synthesized Using Commelina Nudiflora L.Aqueous Extract Against HCT-116 Colon Cancer Cells. Biological Trace Element Research , 173 (2). pp. 297-305. ISSN 0163-4984(Print); 1559-0720(Online). (Published)

Kuppusamy, Palaniselvam and M. M., Yusoff and Gaanty Pragas, Maniam and Natanamurugaraj, Govindan (2016) Biosynthesis of Metallic Nanoparticles Using Plant Derivatives and Their New Avenues in Pharmacological Applications – An Updated Report. Saudi Pharmaceutical Journal, 24 (4). pp. 473-484. ISSN 1319 - 0164. (Published)

Kurniawan, Tedi and Farah Alia, Fauzi and Asmara, Y. P. (2016) High-temperature Oxidation of Fe-Cr Steels in Steam Condition - A Review. Indonesian Journal of Science & Technology, 1 (1). pp. 107-114. ISSN 2527-8045. (Published)

Kusbiantoro, Andri and Nabilah, Mamat and Norbaizurah, Rahman and Doh, Shu Ing (2016) Heat Optimization in Internal Curing Process of Geopolymer Mortar by Using Steel Dust. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 463-468..

Kusbiantoro, Andri and Norbaizurah, Rahman and Chin, Siew Choo and Aji, Ridho Bayu (2016) Effect of Poly (Ethylene-Co-Vinyl Acetate) as a Self-Healing Agent in Geopolymer Exposed to Various Curing Temperatures. Materials Science Forum, 841. pp. 16-20. ISSN 0255-5476. (Published)

Kusbiantoro, Andri and Rahimah, Embong and Nasir, Shafiq (2016) Adaptation of Eco-Friendly Approach in the Production of Soluble Pozzolanic Material. In: 8th International Conference on Comparing Design In Nature with Science and Engineering , 13-15 September 2016 , New Forest, United Kingdom. pp. 1-9.. (Unpublished)

Kusbiantoro, Andri and Rahimah, Embong and Nasir, Shafiq and Muhd Fadhil, Nuruddin (2016) Strength and Microstructural Properties of Fly Ash Based Geopolymer Concrete Containing High-Calcium and Water-Absorptive Aggregate. Journal of Cleaner Production, 112 (Prt 1.). pp. 816-822. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Kuwagi, Kenya and Takami, Toshihiro and Azri, Alias and Rong, Degang and Takeda, Hiroshi and Yanase, Shinichiro and Kouchi, Toshinori and Hyakutake, Toru and Yokoyama, Kaoru and Ohara, Yoshiyuki and Takahashi, Nobuo and Sugitsue, Noritake (2016) Development of DEM-CFD Simulation of Combustion Flow in Incinerator with the Representative Particle Model. Journal of Chemical Engineering of Japan, 49 (5). pp. 425-434. ISSN 0021-9592. (Published)

L., Sujatha and S., Kalaiselvi and Vigneswaran, Narayanamurthy (2016) Out-of-plane Characterization of Silicon-on-insulator Multiuser MEMS Processes-based Tri-axis Accelerometer. Sensors & Transducers, 205 (10). pp. 63-71. ISSN 2306-8515 (print); 1726-5479 (online). (Published)

L. H., Shah and U. K., Mohamad and K. I., Yaakob and A. R., Razali and M., Ishak (2016) Lap Joint Dissimilar Welding of Aluminium AA6061 and Galvanized Iron Using TIG Welding. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1817-1826. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Lai, Wui Chung (2016) Mobile application on learning cardiopulmonary resuscitation (L-CPR). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lau, Lik Yun (2016) Application of palm oil fuel ash (POFA) as a stabilizer in tropical peat soil. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Law, Woon Phui and Jolius, Gimbun (2016) Scale-Adaptive Simulation on the Reactive Turbulent Flow in a Partial Combustion Lance: Assessment of Thermal Insulators. Applied Thermal Engineering, 105. pp. 887-893. ISSN 1359-4311. (Published)

Law, Woon Phui and Wan Hanisah, Wan Ibrahim and Jolius, Gimbun (2016) Modeling of Methyl Methacrylate Polymerization Using MATLAB. Chemical Product and Process Modeling, 11 (3). pp. 185-196. ISSN 1934-2659. (Published)

Lazim, Raghad Yaseen (2016) Evaluation of XML documents queries based on native XML database. UNSPECIFIED thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Lee, Chun Hoong (2016) Waste wood block as partial coarse aggregate replacement in reinforced concrete beam. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Clement Yuon Sien (2016) Optimal charging strategy for plug-in hybrid electric vehicle using evolutionary algorithm. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Lee, Jeng Ye (2016) Fuzzy logic based obstacle avoidance strategy for mobile robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lee, Jie Yen (2016) Strength of soft clay embedded with single crushed polypropylene (PP) column. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Lay Khoon and Liew, Siau-Chuin (2016) A Survey Of Medical Image Processing Tools. International Journal of Software Engineering & Computer Sciences (IJSECS), 2. pp. 10-27. ISSN 2289-8522. (Published)

Lee, Li Fei (2016) The barriers and challenges of ISO 14001 environmental management system implementation in Malaysia industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Lee, Pei Qi (2016) Phytoremediation of heavy metals and desalination of brackish water with ipomoea aquatica using aquaponics system. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Lee, Wei Loon (2016) Simulation of heat flow in a direct-chill caster using comsol multiphysics. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lee, Yong Yong (2016) Composition and biological activities of strobilanthes crispus leaves for essential oils extracted by hydrodistillation (HD) and microwave-assisted hydrodistillation (MAHD) methods. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lee, Zhan Sheng (2016) Process simulation of co-gasification system using adaro coal & Empty Fruit Bunches (EFB) in aspen hysys. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Leong, Chin Jian and Aziman, Abdullah (2016) Public Reporting System for Assessing Public Awareness on Vector Borne Diseases by Digital Crowdsourcing. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 151-155.. ISBN 978-967-2054-04-7

Leong, Pei Mun (2016) Study on ionic interaction in carboxymethyl cellulose-kappa carrageenan doped NH4Cl for bio-electrolyte membranes. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Leong, Zi Zheng (2016) Microcontroller based head-lamp alignment system for automobile. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Li, Zhenya and Sinnott, Richard O. and Choon, Yee Wen and Sjaugi, Muhammad Farhan and Mohd Saberi, Mohamad and Safaai, Deris and Suhaimi, Napis and Omatu, Sigeru and Corchado, Juan Manuel and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2016) Exploring the High Performance Computing-Enablement of a Suite of Gene-Knockout Based Genetic Engineering Applications. In: 10th International Conference on Practical Applications of Computational Biology & Bioinformatics. Advances in Intelligent Systems and Computing, 477 . Springer International Publishing, Switzerland, pp. 133-139. ISBN 978-3-319-40125-6

Liew, Hui Ching (2016) Development and characterization of dual modality system using polymeric nanocarrier. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Liew, Tzun Ming (2016) Study of parking parameters and parking management in Hospital Tengku Ampuan Afzan (HTAA). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Chia Ni (2016) Investigation of DNAPL migration in double-porosity media using image analysis. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Chin Kuan (2016) Factors in achieving technology transfer project success : a case study of third party claims administration in Malaysia. Faculty of Industrial Management, Universiti Malaysia Pahang.

Lim, Kok Wee (2016) Micro autonomous underwater vehicle. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lim, Mei Jing (2016) Study on fabrication and mechanical properties of Al-SiC nano-composite materials. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lim, Pei Jiun (2016) Adoptation of engine for smaller enterprise (E4SE) performance measurement system (PMS) in small project based company in Malaysia. Faculty of Industrial Management, Universiti Malaysia Pahang.

Lim, Shi Han (2016) Prediction of temperature distribution during flashover caused by backdraft fire. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lock, Irene S. M. and Lock, Serene S. M. and Vo, Dai-Viet N. and Bawadi, Abdullah (2016) Thermo-Catalytic Methane Decomposition for Hydrogen Production: Effect of Palladium Promoter on Ni-based Catalysts. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 191-199. ISSN 1978-2993. (Published)

Loi, Shi Jun (2016) Ultimate bearing capacity of cement columns treated peat soil using physical model. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lokman Hakiem, Abd. Samad (2016) MyGift UMP, sumbangan korporat bantu pelajar. Mingguan Malaysia . p. 18.

Low, Wai Mun and M. Rafiqul, Islam and Mimi Sakinah, A. M. and Zularisam, A. W. (2016) Purification of Bioxylitol by Liquid–Liquid Extraction from Enzymatic Reaction Mixture. Separation Science and Technology , 51 (14). pp. 2369-2377. ISSN 0149-6395 (Print); 1520-5754 (Online). (Published)

Luqman Ridhwan, Mohd Nor (2016) Peluang sertai SASTIEC 2016. Kosmo . p. 18.

Lutfor, M. R. and Kulkarni, Ajaykumar D. and M. M., Yusoff and Huey, Chong Kwong and Ching, Kheng Quah (2016) Crystal Structure of 3-{5-[3-(4-fluorophenyl)-1-isopropyl-1Hindol-2-yl]-1H-pyrazol-1-yl}indolin-2-one ethanol monosolvate. Acta Crystallographica Section E: Crystallographic Communications, E72 (3). pp. 283-286. ISSN 2056-9890. (Published)

Lutfor, M. R. and Manda, Bablu Hira and Sarkar, Shaheen M. and Nor Asiken, Abdul Wahab and M. M., Yusoff and Sazmal E., Arshad and Musta, Baba (2016) Synthesis of Poly(hydroxamic acid) Ligand from Polymer Grafted Khaya Cellulose for Transition Metals Extraction. Fibers and Polymers, 17 (4). pp. 521-532. ISSN 1229-9197(Print); 1875-0052(Online). (Published)

Lutfor, M. R. and Mandal, Bablu Hira and Sarkar, Shaheen M. and M. M., Yusoff and Arshad, Sazmal and Musta, Baba (2016) Synthesis of Poly(hydroxamic acid) Ligand from Polymer Grafted Corn-cob Cellulose for Transition Metals Extraction. Polymers for Advanced Technologies, 27 (12). pp. 1625-1636. ISSN 1625-1636. (Published)

Lutfor, M. R. and Mandal, Bablu Hira and Sarkar, Shaheen M. and M. Nomani, Kabir and Farid, Eddy M. and Arshad, Sazmal E. and Musta, Baba (2016) Synthesis of Tapioca Cellulose-Based Poly(hydroxamic acid) Ligand for Heavy Metals Removal from Water. Journal of Macromolecular Science, Part A, 53 (8). pp. 515-522. ISSN 1060-1325 (Print); 1520-5738 (Online). (Published)

Lutfor, M. R. and Sarkar, Shaheen M. and M. M., Yusoff (2016) Efficient Removal of Heavy Metals from Electroplating Wastewater using Polymer Ligands. Frontiers of Environmental Science & Engineering, 10 (2). pp. 352-361. ISSN 2095-2201. (Published)

Lutfor, M. R. and Sarkar, Shaheen M. and M. M., Yusoff and Kulkarni, Ajaykumar D. and Chowdhury, Zaira Zaman and Md. Eaqub, Ali (2016) Poly(amidoxime) from Polymer-Grafted Khaya Cellulose : An Excellent Medium for the Removal of Transition Metal Cations from Aqueous Solution. BioResources, 11 (3). pp. 6780-6800. ISSN 1930-2126. (Published)

Lutfor, M. R. and Sarkar, Shaheen M. and M. M., Yusoff and Mohd Harun, Abdullah (2016) Efficient Removal of Transition Metal Ions using Poly(amidoxime) Ligand from Polymer Grafted Kenaf Cellulose. RSC Advances, 6 (1). pp. 745-757. ISSN 2046-2069. (Published)

Lutfor, M. R. and Tapan, Kumar Biswas and Sarkar, Shaheen M. and M. M., Yusoff and A. R., Yuvaraj and Sandeep, Kumar (2016) Synthesis of New Liquid Crystals Embedded Gold Nanoparticles for Photoswitching Properties. Journal of Colloid and Interface Science, 478. pp. 384-393. ISSN 0021-9797. (Published)

Lwee, Kui Choo (2016) Partial replacement of cement with incinerated sewage sludge ash (ISSA) in mortar brick with natural calcium carbonate as additive. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

M'hamed, Beriache and Nor Azwadi, Che Sidik and Mohammad Noor Afiq Witri, Muhammad Yazid and R., Mamat and G., Najafi and G. H. R., Kefayati (2016) A Review on Why Researchers Apply External Magnetic Field on Nanofluids. International Communications in Heat and Mass Transfer, 78. pp. 60-67. ISSN 0735-1933. (Published)

M'hamed, Beriache and Nor Azwadi, Che Sidik and Mohd Faizal, Ali Akhbar and R., Mamat and G., Najafi (2016) Experimental study on thermal performance of MWCNT nanocoolant in Perodua Kelisa 1000cc radiator system. International Communications in Heat and Mass Transfer, 76. pp. 156-161. ISSN 0735-1933. (Published)

M., Azuddin and Zahari, Taha (2016) Micro Plastic Part Filling Capabilities through Simulation and Experiment A Case Study on Micro Gear Shape. In: Comprehensive Materials Finishing. Elsevier , pp. 441-465. ISBN 978-0-12-803249-7

M., Hussein Adnan and R. A., Bakar and K., Kadirgama and K. V., Sharma (2016) Heat Transfer Enhancement with Elliptical Tube Under Turbulent Flow Tio2-Water Nanofluid. Thermal Science, 20 (1). pp. 89-97. ISSN 2334-7163. (Published)

M., Ishak (2016) Introductory Chapter: A Brief Introduction to Joining and Welding. In: Joining Technologies. Intech, Croatia. ISBN 978-953-51-2596-9 (Print); 978-953-51-2597-6 (online)

M., Ishak and Siti Rabiatull Aisha, Idris and S. N., Aqida and Siti Haryani, Tomadi and Mohd Rashidi, Maarof (2016) BMM3611 Manufacturing Processes Laboratory. Penerbit Universiti Malaysia Pahang, Kuantan, Malaysia. ISBN 978-967-0691-97-8

M., Jamshidian and P., Thamburaja and T., Rabczuk (2016) Modeling the Effect of Surface Energy on Stressed Grain Growth in Cubic Polycrystalline Bodies. Scripta Materialia, 113. pp. 209-213. ISSN 1359-6462. (Published)

M., Kamal and M. M., Rahman (2016) Multiaxial Fatigue Life Modelling using Hybrid Approach of Critical Plane and Genetic Algorithm. Fatigue & Fracture of Engineering Materials & Structures, 39 (4). pp. 479-490. ISSN 1460-2695. (Published)

M., Waris and Asim, Zeeshan (2016) Production + Program: An Integrated Approach for the Revamping and Expansion of an Iron and Steel Making Facility: A Case Study. In: International Business Engineering Conference Proceedings , 26-27 September 2016 , Kuala Lumpur, Malaysia. pp. 63-73.. ISBN 9-789670-691916

M. A., Ameedeen and Marhaini, M. S. (2016) The Potential of a Classification-based Algorithm to Calculate Calories in Real-Time Via Pattern Recognition. In: 3rd International Conference on Communication and Computer Engineering (ICOCOE 2016) , 15-17 March 2016 , Bandung, Indonesia. . (Unpublished)

M. A., Hassan and Sakinah, Muhamad Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Tribological Behaviour Improvement of Lubricant Using Copper (II) Oxide Nanoparticles as Additive. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (2). pp. 363-371. (Published)

M. A., Maleque and M. M., Rahman (2016) Wear Study of Mg-SiCp Reinforcement Aluminium Metal Matrix Composite. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1758-1764. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. E., Babiker and A. R. A., Aziz and M., Heikal and S., Yusup and Hagos, F. Y. (2016) Experimental and Simulation Study on Steam Gasification of Phoenix-Dactylifera Date Palm Seeds. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3201-3214. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. F. F., Ab Rashid and Hutabarat, Windo and Tiwari, Ashutosh (2016) Multi-Objective Discrete Particle Swarm Optimisation Algorithm for Integrated Assembly Sequence Planning and Assembly Line Balancing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. pp. 1-16. ISSN 2041-2975. (Published)

M. F. F., Ab Rashid and M. M., Razali and Make, M. R. Abdullah and N. M. Zuki, N. M. and A. N. M., Rose (2016) NSGA-II Algorithm for Assembly Line Balancing with Multi-Resource Constraints. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 317-321.. ISBN 978-967-2054-04-7

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N., Mohd Rose (2016) A Study of Postural Loading in Malaysian Mining Industry using Rapid Entire Body Assessment. Advances in Smart Systems Research, 5 (1). pp. 30-38. ISSN 2050-8662. (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N. M., Rose (2016) Multi-Objective Optimisation of CNC Milling Process for Al 6061 using Modified NSGA-II. In: 20th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES 2016) , 5-7 September 2016 , York, United Kingdom. pp. 1-8.. (Unpublished)

M. F. F., Ab Rashid and W. S., Wan Harun and S. A., Che Ghani (2016) Optimization of EDM Small Hole Drilling Process Using Taguchi Approach. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2501-2504. ISSN 1819-6608. (Published)

M. H., Sulaiman and Zuriani, Mustaffa and Mohd Rusllim, Mohamed and Omar, Aliman (2016) An Application of Multi-Verse Optimizer for Optimal Reactive Power Dispatch Problem. In: 10th International Power Engineering and Optimization Conference (PEOCO2016) , 26-27 March 2016 , Shah Alam, Selangor. . (Unpublished)

M. H. S., Harun and M. F., Ghazali and A. R., Yusoff (2016) Tri-axial Time-frequency Analysis for Tool Failures Detection in Deep Twist Drilling Process. Procedia CIRP, 46. pp. 508-511. ISSN 2212-8271. (Published)

M. I. N., Isa and Ahmad Salihin, Samsudin (2016) Potential Study of Biopolymer-based Carboxymethylcellulose Electrolytes System for Solid-State Battery Application. International Journal of Polymeric Materials and Polymeric Biomaterials, 65 (11). pp. 561-567. ISSN 0091-4037. (Published)

M. Kh., Abdolbaqi and Azmi, W. H. and R., Mamat and K. V., Sharma and G., Najafi (2016) Experimental Investigation of Thermal Conductivity and Electrical Conductivity of BioGlycol - Water Mixture Based Al2O3 Nanofluid. Applied Thermal Engineering, 102 (June). pp. 932-941. ISSN 1359-4311. (Published)

M. Kh., Abdolbaqi and Azmi, W. H. and R., Mamat and N. M. Zuki, N. M. and G., Najafi (2016) Experimental Investigation of Turbulent Heat Transfer by Counter and Co-Swirling Flow in a Flat Tube Fitted with Twin Twisted Tapes. International Communications in Heat and Mass Transfer, 75. pp. 295-302. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and N. A. C., Sidik and Azmi, W. H. and R., Mamat (2016) An Experimental Determination of Thermal Conductivity and Electrical Conductivity of Bio Glycol Based Al2O3 Nanofluids and Development of New Correlation. International Communications in Heat and Mass Transfer, 73. pp. 75-83. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and Amir, Aziz and R., Mamat and Azmi, W. H. and Mohammad Noor Afiq Witri, Muhammad Yazid and G., Najafi (2016) An Experimental Determination of Thermal Conductivity and Viscosity of BioGlycol/water based TiO2 Nanofluids. International Communications in Heat and Mass Transfer, 77. pp. 22-32. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and Mohd Fadzil, Abdul Rahim and R., Mamat and Azmi, W. H. and Mohammad Noor Afiq Witri, Muhammad Yazid and G., Najafi (2016) Experimental Investigation and Development of New Correlation for Thermal Conductivity and Viscosity of BioGlycol/water based SiO2 Nanofluids. International Communications in Heat and Mass Transfer, 77. pp. 54-63. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and Muhammad Noor Afiq Witri, Mohd Yazid and R., Mamat and Azmi, W. H. and Hind, M. Kh. (2016) Experimental and Numerical Investigation of Heat Transfer Augmentation Using Al2o3-Ethylene Glycol Nanofluids Under Turbulent Flows in a Flat Tube. Jurnal Teknologi (Sciences and Engineering), 78 (9-2). pp. 39-44. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

M. M., Hasan and M. M., Rahman (2016) Homogeneous Charge Compression Ignition Combustion: Advantages Over Compression Ignition Combustion, Challenges and Solutions. Renewable and Sustainable Energy Reviews, 57. pp. 282-291. ISSN 1364-0321. (Published)

M. M., Rahman and Chowdhury, M. A. and Nuruzzaman, D. M. and Debnath, U. K. and Kowser, M. A. and Roy, B. K. (2016) Deposition Rates on Stainless Steel Substrates of Different Surface Roughnesses Under Different Operating Conditions using Thermal CVD. International Journal of Surface Science and Engineering, 10 (3). pp. 282-302. ISSN 1749-7868. (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor and D., Ramasamy (2016) Optimization of Abrasive Machining of Ductile Cast Iron Using Tio2 Nanoparticles: A Multilayer Perceptron Approach. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2529-2534. ISSN 1819-6608. (Published)

M. Nomani, Kabir and Alginahi, Yasser M. and Mohamed, Ali I. (2016) Modeling and Simulation of Traffic flow: A Case Study - First Ring Road in Downtown Madinah. International Journal of Software Engineering & Computer Sciences (IJSECS), 2 (Feb.). pp. 89-107. ISSN 2289-8522. (Published)

M. R., Abdul Hamid (2016) Pembangunan pendidikan ikut acuan tersendiri. Berita Harian .

M. R., Islam and Beg, M. D. H. and Saidatul Shima, Jamari (2016) Dispersion of Montmorillonite Nanoclays and Their Effects on the Thermomechanical, Structural and Drying Properties of Palm Oil Based Coating. Progress in Organic Coatings, 91. pp. 17-24. ISSN 0300-9440. (Published)

M. R., Islam and Gupta, Arun and Rivai, M. and Beg, M. D. H. and Mina, Md. Forhad (2016) Effects of Fiber-surface Treatment on the Properties of Hybrid Composites Prepared from Oil Palm Empty Fruit Bunch Fibers, Glass Fibers, and Recycled Polypropylene. Journal of Applied Polymer Science, 133 (11). p. 43049. ISSN 1097-4628. (Published)

M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and A. F., Jusoh and N. Z. M., Zaid and W. J., Cantwell (2016) The Mechanical Behaviour of Foam-filled Corrugated Core Sandwich Panels In Lateral Compression. In: Proceedings of the American Society for Composites 2016 , 19-22 September 2016 , Williamsburg, Virginia, USA. .

M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and Paruka, P. and S. H. S. M., Fadzullah and Zhang, B. and Cantwell, W. J. (2016) The Mechanical Behavior of Foam-filled Corrugated Core Sandwich Panels in Lateral Compression. In: Proceedings of the American Society for Composites 2016: Thirty-First Technical Conference on Composite Materials , 19-22 September 2016 , Williamsburg, Virginia. pp. 1-17.. ISBN 978-1-60595-316-8

M. R. M., Rejab and N. Z. M., Zaid and J. P., Siregar and Bachtiar, Dandi (2016) Scaling Effects for Compression Loaded of Corrugated-core Sandwich Panels. Advanced Materials Research, 1133. pp. 241-245. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

M. R. R., Chand and F., Basrawi and Hassan, Ibrahim and Mohd Yusof, Taib and Afzam, Zulkepli (2016) A Study on Energy Consumption of a Resort Located in the East Coast of Malaysia. International Journal of Advanced and Applied Sciences, 3 (5). pp. 49-54. ISSN 0973-4562 (Print); 0973-9769 (Online). (Published)

M. R. R., Chand and Hassan, Ibrahim and Zafri, Azran and Azim, Arshad and F., Basrawi (2016) Review on Recent Development Micro Gas Turbine -Trigeneration System and Photovoltaic Based Hybrid Energy System. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 74 (00028). ISSN 2261-236X

M. S., Abdul Wahab and Sunarti, Abd Rahman (2016) Role of PEBAX 1657 On TFC Membranes for Biogas Separation: Biomethane Purification for Sustainable Energy. In: National Congress on Membrane Technology , 24-25 August 2016 , Pulai Spring Resort, Johor Bahru. .

M. S., Ali and M. T., Musthafah and A. M., Mohd Shafei and A. M. T., Khairil and N. F. M., Noordin and R. A., Bakar (2016) Performance of Compressed Natural Gas (CNG) Engine with Pre Chamber. In: Proceedings of Mechanical Engineering Research Day 2016 , 31 March 2016 , Universiti Teknikal Malaysia Melaka. pp. 7-8.. ISBN 978-967-0257-70-9 (online)

M. S., Norhidayah and N. M. Zuki, N. M. and Muhamad Arifpin, Mansor and Ahmad Rasdan, Ismail (2016) A Study of Postural Loading in Malaysian Mining Industry using Rapid Entire Body Assessment. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-4., 74 (00014). ISSN 2261-236X

M. S., Reza and S. N., Aqida and I., Ismail (2016) Interface Bonding of NiCrAlY Coating on Laser Modified H13 Tool Steel Surface. Applied Physics A, 122 (611). pp. 1-6. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

M. S., Shaari and M. R. M., Akramin and A. K., Ariffin and S., Abdullah and Masanori, Kikuchi (2016) Prediction of Fatigue Crack Growth for Semi-Elliptical Surface Cracks using S-version Fem under Tension Loading. Journal of Mechanical Engineering and Sciences (JMES) , 10 (3). pp. 2375-2386. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. S. M., Sani and H., Ouyang (2016) Identification of Nonlinearities in Joints of a Wing Structure. In: MATEC Web of Conferences: International Conference on Structural Nonlinear Dynamics and Diagnosis (CSNDD 2016) , 23–25 May 2016 , Marrakech, Morocco. pp. 1-4., 83 (03006). ISSN 2261-236X

M. S. M., Sani and N. A., Nazri and S. N., Zahari and N. A. Z., Abdullah and G., Priyandoko (2016) Dynamic Study of Bicycle Frame Structure. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-8., 160 (012009). ISSN 1757-8981 (Print), 1757-899X (Online)

M. S. M., Sani and N. A. Z., Abdullah and Siti Norazila, Zahari and Siregar, J. P. and M. M., Rahman (2016) Finite Element Model Updating of Natural Fibre Reinforced Composite Structure in Structural Dynamics. In: MATEC Web of Conferences: International Conference on Structural Nonlinear Dynamics and Diagnosis (CSNDD 2016) , 23–25 May 2016 , Marrakech, Morocco. pp. 1-4., 83 (03007). ISSN 2261-236X

M. S. M., Sani and Siti Norazila, Zahari and N. I. M., Azmi and S., Musa (2016) Secret to Success: Securing Petronas Vendor Development Program (VDP). In: Proceedings of International Conference on Knowledge Transfer (ICKT'15) , 1-3 December 2015 , Putrajaya Marriott Hotel, Malaysia. pp. 113-120.. ISBN 978-967-394-255-8

M. Y., Isafiq and Z., Shayfull and S. M., Nasir and Mohd Rashidi, Maarof and M., Fathullah and N. Z., Noriman (2016) Shrinkage Analysis on Thick Plate Part using Response Surface Methodology (RSM). In: 2nd International Conference on Green Design and Manufacture (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-8., 78.

M. Z., Sharif (2016) Performance analysis of SiO₂PAG nanolubricant in automotive air conditioning system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

M. Z., Sharif and Azmi, W. H. and A. A. M., Redhwan and R., Mamat (2016) Investigation of Thermal Conductivity and Viscosity of Al2O3/PAG Nanolubricant for Application in Automotive Air Conditioning System. International Journal of Refrigeration, 70. pp. 93-102. ISSN 0140-7007. (Published)

M. Z., Sharif and Azmi, W. H. and Mohamad Redhwan, Abd. Aziz (2016) Effect of Nanolubricant on Evaporator and Condenser Pressure of Automotive Air Conditioning System. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 302-308..

M.S., Hendriyawan Achmad and Mohd Razali, Daud and Saifudin, Razali and Pebrianti, Dwi (2016) Human-Robot Interaction Using ROS Framework for Indoor Mapping Missions. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 330-337..

Madan Varmma, Suparmaniam and A. R., Yusoff (2016) Investigation of Surface Roughness and Tool Wear Length With Varying Combination of Depth of Cut and Feed Rate of Aluminium Alloy and P20 Steel Machining. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-9., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Madsen, Frederikke B. and Shamsul, Zakaria and Liyun, Yu and Skov, Anne Ladegaard (2016) Mechanical and Electrical Ageing Effects on the Long-Term Stretching of Silicone Dielectric Elastomers with Soft Fillers. Advanced Engineering Materials. ISSN 1527-2648. (Published)

Mah, Kah Hong (2016) Optimization of interfacial polymerization thin film composite membrane for separation of xylose from glucose. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mahadi, Bahari and Goo, Boon Chin and Pham, Thong L. M. and Tan, Ji Siang and Danh, Huong T. and Nurul, Ainirazali and Vo, Dai-Viet N. (2016) Hydrogen-rich Syngas Production from Ethanol Dry Reforming on La-doped Ni/Al2O3 Catalysts: Effect of Promoter Loading. Procedia Engineering, 148. pp. 654-661. ISSN 1877-7058. (Published)

Mahadi, Bahari and Ming, Fiona-Ling W. and Fayaz, Fahim and Nurul, Ainirazali and Phuc, Nguyen Huu Huy and Vo, Dai-Viet N. (2016) Evaluation of Co-promoted Ni/Al2O3 Catalyst for CO2 Reforming of Ethanol. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7249-7253. ISSN 1819-6608. (Published)

Mahadi, Bahari and Phuc, Nguyen Huu Huy and Bawadi, Abdullah and Alenazey, Feraih and Vo, Dai-Viet N. (2016) Ethanol Dry Reforming for Syngas Production Over Ce-promoted Ni/Al2O3 Catalyst. Journal of Environmental Chemical Engineering. ISSN 2213-3437. (In Press / Online First) (In Press / Online First)

Mahaletchumi, Morgan and Nor Rul Hasma, Abdullah and M. H., Sulaiman and Mahfuzah, Mustafa and Rosdiyana, Samad (2016) Benchmark studies on Optimal Reactive Power Dispatch (ORPD) Based Multi-Objective Evolutionary Programming (MOEP) using Mutation Based on Adaptive Mutation Operator (AMO) and Polynomial Mutation Operator (PMO). Journal of Electrical Systems, 12 (1). pp. 121-132. ISSN 1112-5209. (Published)

Mahamarowi, Omar and Mohd Faizal, Jani and Mohd. Jais Anuar, Ahmad and Ahmad Irfan, Ikmal Hisham (2016) Sikap Dan Peranan Pencerap Muslim Semasa Gerhana Menurut Hadith. In: Prospektus Gerhana Matahari Penuh Palembang 2016. Salam Sdn. Bhd., Selangor, pp. 1-10.

Mahanum, Sulaiman and Hasnah, Haron and Effiezal Aswadi, Abdul Wahab (2016) Factors that Motivates Management to Commit Fraudulent Financial Reporting. The Advocate, 2016 (Apr). p. 7.

Mahathir, Ali (2016) Amanat Naib Canselor. Utusan Malaysia .

Mahathir, Ali (2016) Manfaatkan hasil kajian UMP. Utusan Malaysia .

Mahathir, Ali (2016) Pertandingan Kalam Jamaie. Utusan Malaysia .

Mahathir, Ali (2016) UMP tuan rumah Majlis Anugerah Tokoh Siswa. Utusan Malaysia . p. 30.

Mahdi Hishamuddin, Abdul Aziz (2016) UMP squash reservation system using lighting control. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Mahdi Hishamuddin, Abdul Aziz and Junaida, Sulaiman (2016) UMP Squash Reservation System using Lighting Control. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 435-442.. ISBN 978-967-2054-04-7

Mahendran, Samykano and Md. Mustafizur, Rahman and Kumaran, Kadirgama and Jose, Rajan and Devarajan, Ramasamy and Muhamad, Mat Noor and Nurul Akmal, Che Lah and Pooria, Pasbakhsh (2016) Synthesis and characterization of one dimensional modified cobalt Nanowires for nanoscale mechanical. , [Research Book Profile: Research Report] (Unpublished)

Mahmood, Anwar and S., Izman and Mohammed Rafiq, Abdul Kadir and E. M., Nazim and Aini, Abdul Kadir and M., Konneh and Mas Ayu, Hassan (2016) Elemental Diffusion Behaviour of Biomedical Grade Titanium Alloy through Thermal Oxidation. Applied Mechanics and Materials, 819. pp. 591-595. ISSN 1662-7482. (Published)

Mahmud Jamil, Muhammad and Isa Adamu, Muhammad and Nor Azwadi, Che Sidik and Muhammad Noor Afiq Witri, Muhammad Yazid and R., Mamat and G., Najafi (2016) The Use of Nanofluids for Enhancing the Thermal Performance of Stationary Solar Collectors: A Review. Renewable and Sustainable Energy Reviews, 63. pp. 226-236. ISSN 1364-0321. (Published)

Mahyuddin, Ismail and Jahid, Sidek and Syed Hadzrullathfi, Syed Omar (2016) Pembangunan Instrumen Pengukuran Pematuhan Syariah Bagi Pengamal Perubatan Tradisional dan Komplementari. In: 6th International Conference on Local Knowledge (ICLK 2016) , 27- 28 July 2016 , Penang, Malaysia. pp. 1-6..

Mahyuddin, Ismail and Mansor, Sulaiman and Zulfakar, Ramlee and Mohd Syahrizal Syah, Zakaria (2016) Transferring Knowledge and Expertise to Legal Officers on How to Prosecute Criminals Relating to Witchcraft. In: Proceedings of International Conference on Knowledge Transfer (ICKT'15) , 1-3 December 2015 , Putrajaya Marriott Hotel, Malaysia. pp. 519-524.. ISBN 978-967-394-255-8

Maizatil Akma, Yaacob (2016) The behaviour of normal concrete containing POFA as partial fine aggregate replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Maizatul Farhain, Ismail (2016) Peranan Bioteknologi dalam Konteks Pembangunan Negara. In: Sains-Lah! Catatan Saintis Muda. Simptomatik Press, pp. 1-17. ISBN 9789672011132

Maizatul Farhain, Ismail and Mohd Hairul, Ab. Rahim and Nurul ‘Azyyati, Sabri and Saiful Nizam, Tajuddin (2016) Identification of Nitrogen Fixing Bacteria from Indigenous Microorganisms (IMO) Isolated From Bamboo Area at Taman Pertanian and Lepar Hilir, Pahang. In: The 4th International Conference on Biotechnology Engineering (ICBioE'16) , 25-27 July 2016 , Kuala Lumpur, Malaysia. pp. 1-4..

Makbol, Nasrin M. and Bee, Ee Khoo and Rassem, Taha H. (2016) Block-Based Discrete Wavelet Transform-Singular Value Decomposition Image Watermarking Scheme Using Human Visual System Characteristics. IET Image Processing, 10 (1). pp. 34-52. ISSN 1751-9667. (Published)

Makky, Essam A. and Muna, Jalal and M. M., Yusoff (2016) An Oral Care Composition Against Oral Pathogens. [Intellectual Property (IP)]

Makky, Essam A. and Shaiful Zahid, M. Z. and Manaf, Almatar and M. M., Yusoff (2016) Preliminary Phylogenetic Analysis of Thermophilic Bacteria Producing Protease isolated from Kuantan Malaysia. Journal of Biotechnology Science Research (JBSR), 3 (5). pp. 166-174. ISSN 2409-9775. (Published)

Mandal, Ashis Kumar (2016) Partial examination assignment approaches for solving examination timetabling problems. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mandal, Bablu Hira and Lutfor, M. R. and Mohd Hasbi, Ab. Rahim and Sarkar, Shaheen M. (2016) Highly Active Kenaf Bio-Cellulose Based Poly(hydroxamic acid) Copper Catalyst for Aza-Michael Addition and Click Reactions. ChemistrySelect, 1 (11). pp. 2750-2756. ISSN 2365-6549. (Published)

Mandal, Bablu Hira and Sarkar, Shaheen M. and Lutfor, M. R. and Mohd Hasbi, Ab. Rahim (2016) Kenaf Cellulose Supported Highly Active Poly(Amidoxime) Palladium Complex as a Reusable Heterogeneous Catalyst For Allylic Arylation Reactions. In: Proceedings of the 6th IGCESH2016: International Graduate Conference on Engineering, Science and Humanities , 15-17 August 2016 , Universiti Teknologi Malaysia, Johor. pp. 498-500.. ISBN 978-967-0194-67-7

Mandal, Bablu Hira and Sarkar, Shaheen M. and Lutfor, M. R. and Mohd Hasbi, Ab. Rahim (2016) Synthesis of Kenaf Cellulose Supported Highly Active Poly(amidoxime) Palladium Complex and Its Application as a Reusable Catalyst for Allylic Arylation reactions. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 663-675..

Mandiartha, Putu and Duffield, Colin (2016) A Balanced Approach to Project Management in Partnering Types of Contract: A Public Private Partnerships Framework. In: Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management , 8-10 March 2016 , Kuala Lumpur, Malaysia. pp. 187-196.. ISBN 978-0-9855497-4-9

Mandiartha, Putu and Duffield, Colin F. and Thompson, Russell G. and Wigan, Marcus R. (2016) Measuring Pavement Maintenance Effectiveness using Markov Chains Analysis. Structure and Infrastructure Engineering. pp. 1-11. ISSN 1573-2479. (Published)

Mangaibagan, Rajandran (2016) Performance of the reinforced concrete beam with arch shaped tension steel bar. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Manimekalai, Jambulingam and Sorooshian, Shahryar and Caroline Sumathi, Selvarajah (2016) Tendency of Generation-Y in Malaysia to Purchase Online Technological Products. International Business Management, 10 (2). pp. 134-146. ISSN 1993-5250. (Published)

Manpreet Kaur, Paramjit Singh and Mimi Sakinah, A. M. and Zularisam, A. W. (2016) Adsorption Study of Betacyanin on Fibre. In: 18th International Conference on Textile Engineering (ICTE 2016) , 24-25 March 2016 , Miami, USA. pp. 1-8.. ISSN 2010-3778 (In Press / Online First)

Mansor, Sulaiman (2016) Pendekatan Tarbiyyah (Pendidikan) Menerusi Nas-Nas Al-Quran Berkenaan Sunnah Jatuh Bangun Tamadun Manusia: Suatu Analisis. International Journal of Humanities Technology and Civilization (IJHTC), 1 (2). pp. 1-12. ISSN 2289-7216. (Published)

Mansor, Sulaiman (2016) Peraturan Kejatuhan dan Kebangkitan Masyarakat Menurut Al-Quran dan Perkaitannya dengan Hukum Sebab-Musabab dalam Ilmu Usul Fiqh. International Journal of Humanities Technology and Civilization (IJHTC), 1. pp. 1-9. ISSN 2289-7216. (Published)

Mansor, Sulaiman and Azizur, Rahman and Fatmawati, Latada and Hasan, Ahmad and Mohamad Hilmi, Mat Said (2016) Ijtihad Dan Perkaitannya Dengan Maslahah: Suatu Kupasan. In: The 4th International Conference on Islam and Higher Education (ICIHE-2016) , 5-6 Oktober 2016 , Kolej Yayasan Pahang, Kuantan, Pahang. pp. 1-18.. ISSN 978-967-15028-0-8

Mansor, Sulaiman and Hasan, Ahmad and Husna, Hashim (2016) Keperluan Terhadap Penentuan Had Al-Kifayah Kepada Pembayar Zakat Pendapatan. In: Isu Kontemporari Had Kifayah Zakat Dan Pengurusan Di Malaysia. Penerbit USIM, pp. 39-54. ISBN 978-967-440-320-1

Mansurov, Fatkhiddin (2016) The Influence of Teaching methods of Khawaja Yusuf Hamadānī on the Formation of Sufi Orders in Central Asia. In: Canada International Conference on Education (CICE 2016) , 27-30 June 2016 , University of Toronto Mississauga, Canada . pp. 1-4..

Mansurov, Fatkhiddin (2016) Khawaja Yusuf Hamadānī: His Life, Thoughts and Contribution to the Contemporary Sufism. Literacy Information and Computer Education Journal (LICEJ), 7 (2). pp. 2316-2322. ISSN 2040-2589. (Published)

Mansurov, Fatkhiddin (2016) Redefinition Meaning of Tasawwuf in Contemporary Times. In: Proceedings of International Conference on Language, Education and Civilization , 24-25 May 2016 , Ipoh, Perak, Malaysia. pp. 680-692.. ISBN 978-967-5741-40-1

Mansurov, Fatkhiddin and Khan, Musaddiq Majid (2016) Concept of Hayat, Iman, Ruh, Qadar and al-Kawn in the Teaching of Khawaja Yusuf Hamadani: An Analytical and Descriptive Study. Journal of Epistemology, 3 (3). pp. 1-24. ISSN 2519-6480. (Published)

Mardhiyyah, Zamani and Nurazan, Mohmad Rouyan (2016) Pengaruh Serta Peranan Ibu Bapa Dalam Pembentukan Personaliti Dan Keperibadian Syed Qutb: Analisis Autobiografi “Kisah Seorang Anak Kampung ”. International Journal of Humanities Technology and Civilization (IJHTC), 1 (2). pp. 106-115. ISSN 2289-7216. (Published)

Marekan, M. E. S. and Afiza, Abdullah Suhaimi and N. M., Hussin and R. A., Romzay (2016) Cancer Risk Assessment of Trihalomethanes Exposure in Tap and Swimming Pool Water in Kuantan Hotel. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 11-18. ISSN 2289-697X. (Published)

Marina, Mohd Sham and Nina Suhaity, Azmi (2016) Blue-spotted stingray : A promising source of beneficial glycosaminoglycans (GAGs). International Journal of Applied Chemistry, 12 (4). pp. 795-802. ISSN 0973-1792. (Published)

Marini, C. D. and Fatchurrohman, Nanang and Azmir, Azhari and Suraya, Sulaiman (2016) Product Development using QFD, MCDM and the Combination of these Two Methods. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Marlene Insin, Jack (2016) Strength stabilization of peat soil using ordinary portland cement (OPC). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Marwah Noori, Mohammed and Kamal, Yusoh and Jun Haslinda, Haji Shariffuddin (2016) Methodized Depiction of Design of Experiment for Parameters Optimization in Synthesis of Poly(Nvinylcaprolactam) Thermoresponsive Polymers. Materials Research Express, 3 (12). ISSN 2053-1591. (Published)

Mas Ida, R.Arifuddin (2016) Perceived of procedural justice in selection system : a case study among the successful candidates in Universiti Malaysia Pahang (UMP). Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Masitah, Jusop (2016) Multi-objective optimisation of assembly line balancing type-e problem with resource constraints. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Ab. Rashid).

Masitah, Jusop and M. F. F., Ab Rashid (2016) Optimisation of Assembly Line Balancing Type-E with Resource Constraints using NSGA-II. Key Engineering Materials, 701. pp. 195-199. ISSN 1662-9795. (Published)

Masitah, Jusop and M. F. F., Ab Rashid (2016) Optimization of Assembly Line Balancing with Resource Constraint using NSGA-II: A Case Study. International Journal of Applied Engineering Research (IJAER), 12 (7). pp. 1421-1426. ISSN 0973-4562 (print); 1087-1090 (online). (Unpublished) (Unpublished)

Masturah, Suliman Atoriy (2016) Standardized work approach toward kaizen event of the Front Hub MyVi D54T line at Sapura Machining Corporation Sdn Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mat-Noh, Maziyah and Zain, Zainah Md and Pebrianti, Dwi and Irawan, Addie and Daud, Mohd Razali (2016) Development and robust controller design for underactuated underwater glider platform for UMP lake monitoring. , [Research Report: Research Report] (Unpublished)

Mathivanan, D. B. and Siregar, J. P. and M. R. M., Rejab and Bachtiar, Dandi and Tezara, C. (2016) Modification of Pineapple Leaf Fibre to Reinforce Polylactic Acid Composite with Improved Mechanical Properties. In: International Symposium on Advanced Polymeric Materials (ISAPM 2016) , 16-19 May 2016 , Putra World Trade Centre (PWTC), Kuala Lumpur. .

Mattei, G. and S. N., Aqida (2016) Optical Properties of Surface Layers Enhanced Raman Scattering. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-11. ISBN 978-0-12-803581-8

Mazin Mustafa , Mahdi and Abu Zaharin, Ahmad (2016) Load Frequency Control in Microgrid Using Fuzzy Logic Table Control. In: 11th IEEE International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG 2017) , 4-6 April 2017 , Cadiz, Spain. pp. 318-323.. ISSN 2166-9546

Mazita, Mokhtar and Noor Azlinna, Azizan (2016) The Important of Leadership In Confirming The Success of Herbal Industries In Malaysia. In: 1st International Conference On Advanced Business& Social Science(ICABSS-2016) , 27-30 January 2016 , Kuta, Bali. . (Unpublished)

Mazlan, Hashim and Nadzri M., Reba and Muhammad I., Nadzri and Amin, Pour and Mohd R., Mahmud and Abdull R., Mohd Yusoff and Mohamad Idris, Ali and Jaw, S. W. and Mohammad S., Hossain (2016) Satellite-Based Run-Off Model for Monitoring Drought in Peninsular Malaysia. Remote Sensing, 8 (8). pp. 1-26. ISSN 2072-4292. (Published)

Mazlina, Abdul Majid and Fakhreldin, Mohammed Adam Ibrahim and Kamal Z., Zamli (2016) Comparing Discrete Event and Agent Based Simulation in Modelling Human Behaviour at Airport Check-in Counter. In: Human-Computer Interaction. Theory, Design, Development and Practice. Lecture Notes in Computer Science, 9731 . Springer, Switzerland, pp. 510-522. ISBN 978-3-319-39510-4

Mazlina, Abdul Majid and Fakhreldin, Mohammed Adam Ibrahim and Kamal Z., Zamli (2016) An Enhanced Simulation Model for Complex Human Pedestrian Movement System using Hybrid Discrete Event and Agent Based Simulation. In: 18th International Conference on Human-Computer Interaction (HCI 2016) , 17-22 July 2016 , Toronto, Canada. pp. 1-6.. (Unpublished)

Mazma Syahidatul Ayuni, Mazlan and Norhayati, Rosli and Nina Suhaity, Azmi (2016) Modelling the cancer growth process by stochastic delay differential equations under verhults and gompertz’s law. Jurnal Teknologi (Sciences and Engineering), 78. pp. 77-82. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mazma Syahidatul Ayuni, Mazlan and Norhayati, Rosli and Nina Suhaity, Azmi (2016) Modelling the cancer growth process by stochastic delay diffferential equations under verhults and gompertz's law. Jurnal Teknologi (Sciences and Engineering), 78 (3-2). pp. 77-82. ISSN 2180-3722. (Published)

Mazuina, Mohamad and Hadi, Manap and N. M., Norazmi (2016) Bilirubin Sensing and a Cross Sensitivity Evaluation with Co2 and O2 Using Optical Fiber Sensor. In: Proceedings of the 6th IGCESH2016: International Graduate Conference on Engineering, Science and Humanities , 15-17 August 2016 , Universiti Teknologi Malaysia, Johor. pp. 208-210.. ISBN 978-967-0194-67-7

Md. Rahim, Uddin (2016) Development of Tio2 loaded Cufe2o4 photocatalyst for CO2 conversion into methanol under visible light irradiation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mebrahitom, A. and Rizuan, D. and Azmir, Azhari and M., Nassif (2016) Effect of High-Speed Milling Tool Path Strategies on the Surface Roughness of Stavax ESR Mold Insert Machining. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-6., 114. ISSN 757-8981 (print); 1757-899X (online)

Melissa, Goretti Michael (2016) Identifications of problematic road side environment factors at signalized intersection in Kuantan town. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Meor Ahmad Nasriin Rizal, Ishak (2016) Jurnal terbitan UMP cemerlang. Berita Harian (341). V3.

Meraa Divi, Pannirselvan and Syed Radzi, Rahamaddulla and Puteri Fadzline, Muhamad Tamyez and Mohd Ghazali, Maarof and Sorooshian, Shahryar (2016) Innovative Solution for Barriers of Green Logistics in Food Manufacturing Industries. International Journal of Applied Engineering Research (IJAER), 11 (18). pp. 9478-9487. ISSN 0973-4562 (print); 1087-1090 (online). (Published)

Meraadivi, Pannirselvan (2016) Green logistics study in food manufacturing industries in Johor Darul Takzim. Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Milad, Nasradeen Ali Khalifa (2016) Prediction of road pavement damage for local roads in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mimi Rabita, Abdul Wahit (2016) Sehati@Gambang bantu masyarakat. Berita Harian . p. 6.

Mimi Rabita, Abdul Wahit (2016) UMP perkenal MyGift untuk kebajikan siswa. Berita Harian . p. 20.

Mimi Sakinah, A. M. and Siti Sabrina, M. S. (2016) Combination of Immobilization Techniques of Xylanase by Entrapment and Covalent Binding on Alginate Hydrogel Beads. In: International Conference in Organic Synthesis 2016 (ICOS2016) , 21-24 August 2016 , Kuching, Sarawak. pp. 1-10..

Mofijur, M. and Rasul, Md Golam and Hyde, J. and Azad, A. K. and R., Mamat and Bhuiya, M. M. K. (2016) Role of Biofuel and Their Binary (Diesel–Biodiesel) and Ternary (Ethanol–Biodiesel–Diesel) Blends on Internal Combustion Engines Emission Reduction. Renewable and Sustainable Energy Reviews, 53. pp. 265-278. ISSN 1364-0321. (Published)

Mohamad Affendy, Omardin (2016) Penyelenggaraan fasiliti wujud persekitaran sekolah ceria, selamat. Berita Harian . p. 33.

Mohamad Amilhasan, Shafie (2016) Development of low cost vehicle dynamic data acquisition device using GPS, IMU and OBD integrated system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Amirul Aliff, Yahya (2016) Effect of reinforcement volume fraction on the mechanical properties of the al-sic composite. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Amran, Mohd Salleh and Rashed, Musaab K. and Abdulbari, Hayder A. and M. Halim Shah, Ismail (2016) A Novel Polymer-Surfactant Complex Mixture to Improve Diesel Fuel Flow in a Rotating Disk Apparatus. Advances and Applications in Fluid Mechanics, 19 (3). pp. 669-685. ISSN 0973-4686. (Published)

Mohamad Azam, Ramly (2016) Phytoremediation potential of water spinach, ipomoea aquatic and aquaponic farming system in improving water quality of heavy metals contaminated water resources. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Mohamad Azwani, Londing (2016) Effectiveness of maintanance system at palm oil mill. Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Mohamad Dzulfiqar, Rasli and Muhammad Zaki Mukhtar, Mohd Nor and Sorooshian, Shahryar and Tan, Seng Teck and Md. Yusof, Ismail (2016) How Productivity Can Be Affected By Human Capital. International Journal of Engineering Applied Sciences and Technology, 1 (6). pp. 29-32. ISSN 2455-2143. (Published)

Mohamad Eliyass, Jamaruppin and Bayuaji, Luhur and Ngahzaifa, Ab. Ghani and Rahman, Md. Arafatur and Farid Wajdi, Akashah and Azlan, Shah (2016) Forest Fire Occurrence Analysis Base on Land Brightness Temperature Using Landsat Data (Study Area: Jalan Kuantan-Pekan, Pahang, Malaysia). In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 798-805..

Mohamad Firdaus, Mohamad Azhar (2016) The effect of elevated temperature on properties of mortar containing crushed cockle shell and palm oil fuel ash as mixing ingredient. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohamad Hafizuddin, Rasid (2016) UMP laksana Misi Kemanusiaan ke Kemboja kali ke-4. CREATE . p. 66. ISSN 1823-7487

Mohamad Heerwan, Peeie and Ogino, Hirohiko and Oshinoya, Yasuo (2016) Skid Control of a Small Electric Vehicle with Two In-Wheel Motors: Simulation Model of ABS and Regenerative Brake Control. International Journal of Crashworthiness, 21 (5). pp. 396-406. ISSN 1358-8265. (Published)

Mohamad Hilmi, Mat Said (2016) Mekanisme Pendidikan Insan dan Ciri-Ciri Kekuatannya Berdasarkan Analisa Ayat-Ayat Al-Qur'an Terpilih. International Journal of Humanities Technology and Civilization (IJHTC), 1. pp. 83-92. ISSN 2289-7216. (Published)

Mohamad Hilmi, Mat Said and Hasan, Ahmad and Mansor, Sulaiman (2016) Kajian Komitmen Pensyarah Terhadap Tatacara Berpakaian, Sahsiah dan Rupa Diri Pelajar IPT Malaysia. In: Seminar Kebangsaan Tamadun dan Warisan Islam (TAWIS) 2016 , 8-9 Disember 2016 , Universiti Kebangsaan Malaysia, Bangi. pp. 1-15.. (Unpublished)

Mohamad Ridhwan Shahril, Baharudin (2016) Design and deveploment of motion and thermal controller for thermal fatigue machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Rizza, Othman and Rosshila, Idris and Mimi Haryani, Hassim and Wan Hanisah, Wan Ibrahim (2016) Prioritizing HAZOP Analysis using Analytic Hierarchy Process (AHP). Clean Technologies and Environmental Policy, 18 (5). pp. 1345-1360. ISSN 1618-954X. (Published)

Mohamad Shaiful, Mohd Shariff (2016) Assessment of potential climatic scenario in Pahang state. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohamad Shofi, Mat Isa (2016) Huffaz-M bantu hafazan al-Quran. Utusan Malaysia . p. 32.

Mohamad Shofi, Mat Isa (2016) Lima bergelar Datuk genggam ijazah sarjana. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2016) Warga UMP berkayak Sehati Sejiwa. Utusan Malaysia . p. 28.

Mohamad Syahmi, Shahrom (2016) Direct recycling of aluminium alloy 6061 and 7075 employing cyclic extrusion compression back pressure technique. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Zhafrul Amir, Mohamad Zaki Amir (2016) Milk type classification: a case based reasoning using electronic nose (e-nose). Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohamad Zulfadhli, Che Hassim (2016) Public awareness on sustainable transportation : a case study in Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohamad Zulfahdli, Masli and Sarani, Zakaria and Chia, Chin Hua and Rasidi, Roslan (2016) Polymeric reaction between aldehyde group in furfural and phenolic derivatives from liquefaction of oil palm empty fruit bunch fiber as phenol-furfural resin. In: AIP Conference Proceedings; 2016 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2016 , 13 - 14 April 2016 , Faculty of Science and Technology, Universiti Kebangsaan Malaysia, Selangor. pp. 1-2., 1784 (040030). ISSN 0094-243X ISBN 9780735414464

Mohamed Reza Zalani, Mohamed Suffian and S. N., Aqida and Izwan, Ismail (2016) Interface bonding of NiCrAlY coating on laser modified H13 tool steel surface. Applied Physics A: Materials Science and Processing, 122 (611). pp. 122-611. ISSN 09478396. (Published)

Mohamed Yazrul, Mohd Yassin (2016) Cooperation between laccase and glucose oxidase in the oxidation of lignin model compound. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Affendy, Omardin (2016) Kepentingan selenggara kediaman kekal estetika. Berita Harian .

Mohammad Affendy, Omardin (2016) Pembinaan Infrastuktur Lebih Kreatif. CREATE . pp. 100-101. ISSN 1823-7487

Mohammad Affendy, Omardin (2016) Realisasi pembangunan infrastruktur mapan demi kesejahteraan komuniti. Berita Harian .

Mohammad Affendy, Omardin (2016) Transformasi Pengurusan Penyelenggaraan Bangunan Awam dan Premis Kerajaan. CREATE . pp. 80-81. ISSN 1823-7487

Mohammad Amirul, Mohd Yusof and Mazrul Nizam, Abu Seman (2016) Polyamide Forward Osmosis Membrane: Synthesis, Characterization and Its Performance for Humic Acid Removal. Journal of Membrane Science & Research, 2. pp. 90-94. (Published)

Mohammad Amirul, Mohd Yusof and Mazrul Nizam, Abu Seman and Nidal, Hilal (2016) Development of Polyamide Forward Osmosis Membrane for Humic Acid Removal. Desalination and Water Treatment, 57 (60). pp. 29113-29117. ISSN 1944-3986. (Published)

Mohammad Fazle, Rabbi (2016) High mobility channel estimation based on amplifyand-forward model in cooperative network. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad Hameez, Mat Zin and Ali, Jahan and Rahman, Md. Arafatur and Azad, Saiful and M. Nomani, Kabir (2016) IoT Enabled Intra-Vehicular Communication for Designing A Smart Car. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 253-259.. ISBN 978-967-2054-04-7

Mohammad Hassan, Mudaber and Yuhani, Yusof and Mohd Sham, Mohamad and Aizi Nor Mazila, Ramli and Wen, Li Lim (2016) Modelling Of Two Stages DNA Splicing Languages On De Bruijn Graph. Jurnal Teknologi (Sciences and Engineering), 78 (1). pp. 73-78. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohammad Huzaifah, Che Manaf (2016) Arduino- based temperature monitoring and control via can bus. Faculty of Electrical & Electronics Engineering, University Malaysia Pahang.

Mohammad Samir, Abu Bakar (2016) Developing the rapidkuantan system to reduce idle time among the stations using simulation model. Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Mohammad Shafiqul Naim, Shafie (2016) An investigation to improve performance of grounding system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohammad Syawaludin Syafiq, Hassan (2016) The development of a tracking algorithm for ambulance detection using squaring of RGB and HSV color processing techniques. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad Zuhaili, Yahya and Norhayati, Abdullah (2016) Development of Hypercrosslinked Hydrophilic Polymer using Dispersion Polymerization Technique for Separation Process. Journal of Malaysian Critical Metals, 1. pp. 31-39. ISSN 0128-2557. (Published)

Mohammed, Ausama A. and Bachtiar, Dandi and Siregar, J. P. and M. R. M., Rejab and Syed Farhan, Hasany (2016) Physico-chemical Study of Eco-friendly Sugar Palm Fiber Thermoplastic Polyurethane Composites. BioResources, 11 (4). pp. 9438-9454. ISSN 1930-2126 (print); 1930-2126 (online). (Published)

Mohammed, Ausama Al-sarraf and Bachtiar, Dandi and Siregar, J. P. and M. R. M., Rejab and Syed Farhan, Hasany (2016) Physicochemical study of eco-friendly sugar palm fiber thermoplastic polyurethane composites. BioResources, 11 (4). pp. 9438-9454. ISSN 1930-2126 (print); 1930-2126 (online). (Published)

Mohammed, Ghusoon R. and M., Ishak and S. N., Aqida and Hassan, A. Abdulhadi (2016) The Effect of Fiber Laser Parameters on Microhardness and Microstructure of Duplex Stainless Steel. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (01024). ISSN 2261-236X

Mohammed, K. Mohammed and M. Kh., Abdolbaqi and Ibrahim, Thamir K. and R., Mamat and Awad, Omar I. (2016) Experimental and Numerical investigation of Heat transfer enhancement using Al2O3-Ethylene Glycol/Water Nanofluids in Straight Channel. In: UTP-UMP Symposium on Energy Systems 2016 , 22 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 1-9.. (Unpublished)

Mohammed, Maysoon A. and Mazlina, Abdul Majid and Balsam, A. Mustafa (2016) Multi-queue CPU Process Prioritization using a Dynamic Quantum Time Algorithm Compared with Varying Time Quantum and Round-Robin Algorithms. International Journal of Computer Applications, 134 (7). pp. 33-37. ISSN 0975-8887. (Published)

Mohammed, Maysoon A. and Mazlina, Abdul Majid and Balsam, A. Mustafa (2016) A Proposed Priority Dynamic Quantum Time Algorithm to Enhance Varying Time Quantum Round Robin Algorithm. International Journal of Computer Applications in Technology, 54 (3). pp. 184-191. ISSN 0952-8091 (print); 1741-5047 (online). (Published)

Mohammed, Maysoon A. and Mazlina, Abdul Majid and Balsam, A. Mustafa and Ghani, Rana Fareed (2016) CPU Thread Prioritization Using a Dynamic Quantum Time Round-Robin Algorithm. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13084-13089. ISSN 1819-6608. (Published)

Mohammed, Mohammed Adam Taheir and Wan Maseri, Wan Mohd and Ruzaini, Abdullah Arshah and Mungad, M. and Sutoyo, Edi and Chiroma, Haruna (2016) Analysis of Parameterization Value Reduction of Soft Sets and its Algorithm. International Journal of Software Engineering & Computer Sciences (IJSECS), 2. pp. 51-57. ISSN 2289-8522. (Published)

Mohammed, Mostafa Abdulghafoor and Salih, Zeyad Hussein and Tapus, Nicolae and Hasan, Raed Abdulkareem (2016) Security and accountability for sharing the data stored in the cloud‏. In: IEEE 15th RoEduNet Conference: Networking in Education and Research , 7-9 September 2016 , Bucharest, Romania. . ISSN 2247-5443

Mohammed Alyaqoobi, Zainab and Fatimah, Ali (2016) An Analysis of Errors Caused by Omani ESL Learners in Pronouncing Certain Consonant Sounds. In: Conference Proceedings: 2nd International Conference on Learning, Education and Pedagogy (LEAP) 2016 , 24-25 May 2016 , Rumah Kelab PAUM Clubhouse (Persatuan Alumni Universiti Malaya), Kuala Lumpur, Malaysia. pp. 1-26..

Mohammed Alyaqoobi, Zainab and Fatimah, Ali and Norrihan, Sulan (2016) An Analysis of Errors Caused by Omani EFL Learners in Pronouncing Certain Consonant Sounds. International Journal of Language Education and Applied Linguistics (IJLEAL), 5. pp. 59-71. ISSN 2289-7208 (print); 2289-9294 (online). (Published)

Mohammed Babiker, Suliman Blal (2016) Investigation of antimicrobial activity, bioassay-guided isolation and identification of antimicrobial compounds from swietenia macrophylla king. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed Firdaus, Ramli (2016) Dc - dc charge controller for a small pv system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohammed M., Hassan and M., Ishak and M. R. M., Rejab (2016) Influence of Machine Variables and Tool Profile on the Tensile Strength of Dissimilar AA7075-AA6061 Friction Stir Welds. The International Journal of Advanced Manufacturing Technology. pp. 1-11. ISSN 0268-3768 (Print); 1433-3015 (Online). (Published)

Mohamrned A, Al-Sharafi and Ruzaini, Abdullah Arshah and Emad, Abu-Shanab and Nabil, Elayah (2016) The Effect of Security and Privacy Perceptions on Customers' Trust to Accept Internet Banking Services An Extension of TAM. Journal of Engineering and Applied Sciences, 11 (3). pp. 545-552. ISSN 1819-6608. (Published)

Mohanaad, Shakir and Asmidar, Abu Bakar and Younus, Yousoff and Mostafa, Al-Emran and Maytham, Hammood (2016) Application Of Confidence Range Algorithm In Recognizing User Behavior Through EPSB in Cloud Computing. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 415-427. ISSN 1992-8645 (print); 817-3195 (online). (Published)

Mohd, Nizar and Arimatsu, Naoya and Kawamitsu, Hiroshi and Takai, Kazuteru and Fukumoto, Masahiro (2016) Study on Optimal Surface Property Of WC-Co Cutting Tool for Aluminium Alloy Cutting. IOP Conference Series: Materials Science and Engineering, 114 (012024). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Mohd Adnin, Hamidi (2016) Ignition mechanism analyzed through transient species measurements and its correlation with O-D and 3-D simulations for PRF and toluene n-heptane mixture. Masters thesis, Toyama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Aidil, Awaluddin (2016) Effect of hydrogen concentration on the explosion severity in a closed vessel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Aiman, Barudin (2016) Molecular characterization of fragrance-related transcripts in benzenoid/phenylpropanoid pathway of Vanda Mimi Palmer. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Tan Suat, Hian).

Mohd Akmal, Azhar and Norshafiqa, Salim (2016) Isolation and Molecular Characterization of Local Goat Milk Casein for Nutraceutical Value. In: Engineering Technology International Conference 2016 , 4-5 August 2016 , Ho Chi Minh, Vietnam. pp. 1-4.. (Unpublished)

Mohd Akramin, Mohd Romlay (2016) Analysis of fatigue surface crack using the probabilistic s-version finite element model. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Arfian, Ismail (2016) Hybrid multi-objective optimization methods for in silico biochemical system production. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Ariffin, Abdul Aziz (2016) Cara memulakan Kelab Buku. Wadah (1). p. 5. ISSN 2180-0456

Mohd Ariffin, Abdul Aziz (2016) Google Scholar mudahnya menggunakannya. Wadah, 2 . p. 5. ISSN 2180-0456

Mohd Ashraf, Ahmad and Azuma, Shun-ichi and Sugie, Toshiharu (2016) Identification of Continuous-Time Hammerstein Systems by Simultaneous Perturbation Stochastic Approximation. Expert Systems with Applications, 43. pp. 51-58. ISSN 0957-4174. (Published)

Mohd Asmawi, Md Desa (2016) Behaviour of oil palm shell reinforced concrete beam partly replaced by palm oil fuel ash. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Asyraf, Othman (2016) UMP bantu guru taska tingkat kemahiran berbahasa Inggeris. UMP News . (Unpublished)

Mohd Ayaz, Mohd Abdul Nassir (2016) The properties of cement-sand brick containing different type of shredded paper as mixing ingredient. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Azam, Muhammad Akhir and Muhammad Nubli, Abdul Wahab and Zarina, Mohd Ali (2016) Pengukuran dan Penilaian Tahap Emosi Pelajar dalam Aktiviti Kokurikulum: Permasalahan dan Cadangan. International Journal of Humanities Technology and Civilization (IJHTC), 1 (2). pp. 72-82. ISSN 2289-7216. (Published)

Mohd Azfar Shazwan, Mustari (2016) Interactive slideshow remote control (SRC) mobile application for android. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Mohd Azimie, Ahmad and Airul Sharizli, Abdullah (2016) Novel Wireless Monitoring for Water Discharge in Industry. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 311-316.. ISBN 978-967-2054-04-7

Mohd Azimie, Ahmad and Norazura, Ismail and Mohamad Rizza, Othman (2016) An Analysis of Dust Explosion Incidents in Industries and Mitigation Best Practices within Malaysia. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 483-489..

Mohd Azri Hizami, Rasid (2016) Contribution to multi-physical studies of small synchronous-reluctance machine for automotive equipment. PhD thesis, Université de Technologie de Compiègne (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azri Hizami, Rasid and Ospina, Alejandro and Benkara, Khadija El Kadri and Lanfranchi, Vincent (2016) A Thermal Study on Small Synchronous Reluctance Machine in Automotive Cycle. In: IEEE 25th International Symposium on Industrial Electronics (ISIE 2016) , 8-10 June 2016 , Santa Clara, CA, USA. pp. 1-7.. (Unpublished)

Mohd Burhanuddin, Hamzah and Nor Azhar, Ahmad (2016) Real Time Water Level Detection Systems for Water Treatment Plant. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 347-351.. ISBN 978-967-2054-04-7

Mohd Esuadi, Mustaffa (2016) XPDC cinta Gunung Kinabalu. Wadah . p. 15. ISSN 2180-0456

Mohd Fadhlan, Mohd Yusof and C. K. E., Nizwan and S. A., Ong and M. Q. M., Ridzuan (2016) Clustering of Frequency Spectrum from Different Bearing Fault using Principle Component Analysis. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished)

Mohd Fadhlan, Mohd Yusof and M. A., Kamaruzaman and M., Zubair and M., Ishak (2016) Detection Of Defects On Weld Bead Through The Wavelet Analysis Of The Acquired Arc Sound Signal. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). pp. 2031-2042. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Fadhlan, Mohd Yusof and Muhammad Aizat, Kamaruzaman and M., Ishak and M. F., Ghazali (2016) Porosity Detection by Analyzing arc Sound Signal Acquired During the Welding Process of Gas Pipeline Steel. The International Journal of Advanced Manufacturing Technology. pp. 1-10. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Mohd Fadzli Shah, Ahmad Hamim (2016) Modeling and analysis performance of BLDC motor electric bicycle. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohd Faizal, Ab Razak and Nor Badrul, Anuar and Rosli, Salleh and Ahmad, Firdaus (2016) The Rise of “malware”: Bibliometric Analysis of Malware Study. Journal of Network and Computer Applications, 75. pp. 58-76. ISSN 1084-8045. (Published)

Mohd Faizal, Md Jaafar and Hamidah, M. S. and Muhd Nurhasri, M. S. and Noorli, I. (2016) Effect of Clay as a Nanomaterial on Corrosion Potential of Steel Reinforcement Embedded in Ultra-High Performance Concrete. In: InCIEC 2015: Proceedings of the International Civil and Infrastructure Engineering Conference. Springer, Singapore, pp. 679-687. ISBN 978-981-10-0154-3

Mohd Faizul Farhan, Ahmad Hamidi and Wan Sharuzi, Wan Harun and Faiz, Ahmad and Abu Bakar, Sulong (2016) Effect of Binders on Physical and Mechanical Properties of Stainless Steel 316L Alloy Fabricated by Metal Injection Moulding Process. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 85-88..

Mohd Fakhrurrazi, Ishak and F.F., Sulaiman and N., Ali and A., Kassim (2016) Tree Water Uptake and Suction Distribution on Tropical Residual Soil Slope. In: 3rd International Conference on Geological, Geographical, Aerospace and Earth Science, AeroEarth 2015 , 26-27 September 2015 , The Double Tree Hilton, Jakarta; Indonesia. pp. 1-7., 30 (1). ISSN 1755-1307

Mohd Fakhrurrazi, Ishak and Muhammad Farhan, Zolkepli (2016) Exploration of Methods for Slope Stability Analysis Influenced by Unsaturated Soil. Electronic Journal of Geotechnical Engineering (EJGE), 21 (Bund. 16). pp. 5627-5641. ISSN 1089-3032. (Published)

Mohd Fakhrurrazi, Ishak and Nazri, Ali and Azman, Kassim (2016) Analysis of suction distribution response to rainfall event and tree canopy. Jurnal Teknologi (Sciences and Engineering), 78 (8-5). pp. 83-87. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Fakhrurrazi, Ishak and Nazri, Ali and Azman, Kassim (2016) Tree Induced Suction On Slope Stabilization Analysis. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7204-7208. ISSN 1819-6608. (Published)

Mohd Fakhrurrazi, Ishak and Shaedon, S. and Noor Asiah, Mohamad and M.H., Zainal Abidin (2016) Stabilisation analysis of slope on bauxite mining area. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2587-2591. ISSN 1819-6608. (Published)

Mohd Falfazli, Mat Jusof (2016) Opposition-based learning simulated kalman filter for Numerical optimization problems. , [Research Book Profile: Research Report] (Unpublished)

Mohd Fawzi, Zamri and Lim, Syh Kai and A. R., Yusoff (2016) Experimental Validation for Hot Stamping Process by Using Taguchi Method. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Mohd Ferdaus, Musa (2016) Sahur percuma setiap Rabu sempena Ramadan. CREATE . p. 48. ISSN 1823-7487

Mohd Firdaus, Zainal Abidin (2016) Buck-boost converter for PV solar system. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Mohd Ghazali, Maarof and Fatimah, Mahmud (2016) A Review of Contributing Factors and Challenges In Implementing Kaizen in Small and Medium Enterprises. Procedia Economics and Finance, 35. pp. 522-531. ISSN 2212-5671. (Published)

Mohd Ghazali, Maarof and Sorooshian, Shahryar and Syed Radzi, Rahamaddulla (2016) University-Industry Collaboration: Barriers to Commercialization. In: 8th International Management and Accounting Conference (IMAC8) , 28-29 September 2016 , Langkawi, Malaysia. pp. 1-8..

Mohd Haizal, Mohd Husin (2016) Study on copper incorporated mesoporous silica SBA-15 for N2O catalytic decomposition. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hanafiah, Ahmad and Ab Hamid, Mohd Rashid and Noor Azlinna, Azizan (2016) Cultural Factors and their Effects on Organisational Justice. A Conceptual Framework for Malaysians Assessment Centres. In: Saudi International Conference On Business, Economics and Management (SICBEM) , 22-24 March 2016 , Jeddah, Saudi Arabia. pp. 1-12.. (Unpublished)

Mohd Hanif, Razali (2016) Development of strength performance monitoring system for lower limb. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Hasbi, Ab. Rahim (2016) Novel Fuel Additives Chemical from Oil Palm Sap. In: The Invention & New Product Exposition (INPEX) 2016 , 7-9 June 2016 , Pittsburgh, United States of America. p. 1..

Mohd Hasbi, Ab. Rahim and Robert, D. Armstrong and Ceri, Hammond and Nikolaos, Dimitratos and Simon, J. Freakley and Michael, M. Forde and David, J. Morgan and Georgi, Lalev and Robert, L. Jenkins and Jose Antonio, Lopez-Sanchez and Stuart, H. Taylor and Graham, J. Hutchings (2016) Low temperature selective oxidation of methane to methanol using titania supported gold palladium copper catalysts. Catalysis Science & Technology. ISSN 2044-4753 (printed); 2044-4761 (online). (Published)

Mohd Haslizam, Abdullah and Mohd Hafizu, Zakaria and Muhamad Sollehudin, Ibrahim and Ahmad Damanhuri, Mohamad Yussof and S. A., Che Ghani (2016) Ultraxtor - Low Resources High Yield Benchtop Agarwood Essential Oil Extractor. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 138-144.. ISBN 978-967-2054-04-7

Mohd Hasnun Ariff, Hassan (2016) Modelling and analysis of soccer heading and protective headgear to understand and prevent mild traumatic brain injury. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zahari, Taha).

Mohd Hazwan, Yusof and Katanoda, Hiroshi (2016) Mixing Temperature Measurement of Swirl Cold Flow Exiting Cold Exit of Vortex Tube. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-5., 38 (01006). ISSN 2261-236X

Mohd Hazwan, Yusof and Muhammad Fadhli, Suhaimi and Mohd Hilmi, Mohd Aris and Syed Mohammad, Akhtar (2016) Numerical Study on the Effect of Geometrical Parameters on the Performance of Vortex Tube Cooling Device Using Simflow. In: International Conference on Science, Engineering, Management and Social Sciences (ICSEMSS 2016) , 6-8 October 2016 , Universiti Teknologi Malaysia. pp. 1-8..

Mohd Husni, Mohd Noor (2016) 6 pelajar orang asli ke UK. Harian Metro . p. 47.

Mohd Iqbal, Mustaparudin (2016) Control of a quadcopter. Faculty of Manufacturing 'Engineering, Universiti Malaysia Pahang.

Mohd Ishak, Ismail and Rahman, Md. Arafatur and Azad, Saiful (2016) Exploiting Privacy-Policy and -Management Features on Social Networks: A User's Perspective. In: 6th International Conference on Computer and Communication Engineering: Innovative Technologies to Serve Humanity (ICCCE 2016) , 26-27 July 2016 , Kuala Lumpur, Malaysia. pp. 66-71. (7808285). ISBN 9781509024278

Mohd Ishak, Ismail and Ruzaini, Abdullah Arshah (2016) The Impacts Of Social Networking Sites In Higher Learning. International Journal of Software Engineering & Computer Sciences (IJSECS), 2. pp. 114-119. ISSN 2289-8522. (Published)

Mohd Iszuani, Mohd Hassan (2016) Bahasa Jepun Mudah 1. Penerbit UMP, Kuantan, Pahang. ISBN 9789670120324

Mohd Mawardi, Saari and Saifudin, Razali and Amir Izzani, Mohamed and Hamdan, Daniyal and Hamzah, Ahmad and Sutjipto, Agus Geter Edy and Nazatul Sharreena, Suhaimi and Muhammad Hafiz, Mazwir (2016) Investigating the magnetic fluid characteristics in low concentration solutions to enhance harmonics generation. , [Research Book Profile: Research Report] (Unpublished)

Mohd Najib, Razali and Muhamed Yusuf, Shahul Hamid and Abdul Aziz, Mohd Azoddein (2016) Recovery of Mineral Oil from Waste Emulsion using Electrocoagulation Method. MATEC Web of Conferences, 38 (03005). pp. 1-7. ISSN 2261-236X. (Published)

Mohd Nasaruddin, Parzi (2016) Bulan 'tawaf' kelilingi Kaabah mesej palsu. Berita Harian . p. 9.

Mohd Nor Fikry, Jamaludin (2016) Improvement of interlocking thin sheet metal in joining using plastic deformation process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Nordin, Zainol (2016) The failure factors of implementing tqm at construction organization at Kuantan. Faculty of Industrial Management, Universiti Malaysia Pahang.

Mohd Rafi, Mamat (2016) Kulit kerang bantu pertumbuhan tulang. Berita Harian . p. 21.

Mohd Rafi, Mamat (2016) Racun serangga UMP bolot tujuh emas. Berita Harian . p. 4.

Mohd Rashid, Ab Hamid (2016) PSH bantu lahir pemimpin berilmu. Berita Harian . p. 22.

Mohd Rashid, Ab Hamid (2016) Pendidikan TVET berasaskan PSH. Berita Harian . p. 14.

Mohd Rashid, Ab Hamid (2016) Pendidikan fleksibel PSH lahir sumber manusia berpengetahuan. Berita Harian .

Mohd Razali, Hanipah and Zamri, Mohamed (2016) Numerical Investigations on the Port Flow Field of a Two-Stroke Poppet Valve Engine. In: 2nd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2016) , 2-3 August 2016 , MAI, Cyberjaya, Malaysia. pp. 1-11.. (Unpublished)

Mohd Riduwan, Ghazali and Mohd Helmi, Suid and Zuwairie, Ibrahim and Muhammad Salihin, Saealal and Mohd Zaidi, Mohd Tumari (2016) Single Input Fuzzy Logic Controller for Flexible Joint Manipulator. International Journal of Innovative Computing, Information and Control, 12 (1). pp. 181-191. ISSN 1349-4198. (Published)

Mohd Ridzuan, Abu Hassan (2016) UMP wujudkan makmal iMAMS. Sinar Harian . p. 37.

Mohd Saiful, Mohd Sahak (2016) Ekspokonvo UMP gegar Pahang. Utusan Malaysia . p. 1.

Mohd Saiful Akmal, Razali (2016) Simulation of assembly line for production performance improvement. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Shafeirul Zaman, Abd Majid and Azwin Arif, Abdul Rahim and Razmi, Ab Rahman and Zetti Adela, Zolkepli (2016) A Conceptual Framework for Teaching English in TVET Environment. In: Proceedings of 6th National Conference in Education, Technical & Vocational in Education and Training 2016 , 27-28 September 2016 , Politeknik Sultan Haji Ahmad Shah, Kuantan, Pahang. pp. 144-151. (1). ISBN 978-967-0778-16-7

Mohd Shahri, Mohd Akhir (2016) UMP menang anugerah khas MIPA dan 13 emas dalam ITEX 2016. UMP News . (Unpublished)

Mohd Shahrir Ashraf, Abdul Wahab (2016) Study of surface roughness effects to liquid contact angle on solid surface. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Shaiful Zaidi, Mat Desa and Azman, Hassan and Agus, Arsad and Reza, Arjmandi and Nor Nisa Balqis, Mohammad (2016) Influence of Rubber Content on Mechanical, Thermal, and Morphological Behavior of Natural Rubber Toughened Poly(Lactic Acid)-Multiwalled Carbon Nanotube Nanocomposites. Journal of Applied Polymer Science, 133 (48). p. 1. ISSN 1097-4628. (Published)

Mohd Shariza, Abdullah (2016) Pertandingan catur UMP meriah. Utusan Malaysia . p. 30.

Mohd Shariza, Abdullah (2016) UMP ejen transformasi, memasyarakatkan teknologi. Utusan Malaysia . p. 2.

Mohd Syafiq, Yusoff and Zamzuri, Hamedon (2016) Prevention of Springback of High Strength Steel Sheet in L-Bending Process. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 398-403..

Mohd Syukran, Ab Razak (2016) The potential of oven dry sewage sludge as partial sand replacement in concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Warid, Hussin and Khairunisa, Muthusamy and Mohd Azreen, Mohd Ariffin and Nur Farhayu, Ariffin and Nor Hasanah, Abdul Shukor Lim (2016) POFA concrete theory and application. Penerbit UMP, Kuantan, Pahang. ISBN 9789672054030

Mohd Yazid, Abu (2016) Integration of mahalanobis-taguchi system and activity based costing in decision making for remanufacturing. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Yuhyi, Mohd Tadza (2016) Industry Centre of Excellence (ICOE): Graduate Employability through BIM Initiatives. In: Seminar on Building Information Modeling (BIM) Initiative In 11th Malaysian Plan , 5 April 2016 , MDec, Cyberjaya. pp. 1-20.. (Unpublished)

Mohd Yuhyi, Mohd Tadza (2016) Kuantan - Mars on Earth: Environmental Problems and Solutions. In: 2nd International Conference in Environmental and Civil Engineering Technology (ENVICET 2016) , 4-6 October 2016 , Penang, Malaysia. pp. 1-23..

Mohd Yuhyi, Mohd Tadza and Anis Ayesha, Noraini (2016) Effect of Wildfire on Soil-Water Characteristics of Natural Slope Containing Temperature Sensitive Silica-alumina Polymorph Minerals. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 157-163. ISSN 1991-8178. (Published)

Mohd Yuhyi, Mohd Tadza and Mohd Fazli, Farida Asras and Muhammad Afiq, Mohd Tadza and Jamil, Ismail and Nurhidayah, Mahazam and Nurul Shafiqah, Mohd Azmi (2016) Intrusion of Polyethylene Glycol during Osmotic Tests: Identifying Cellulose Acetate Degrading Microbes. Jurnal Teknologi (Sciences and Engineering), 78 (8-5). pp. 11-16. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Yuhyi, Mohd Tadza and Nur Ain Farhana, Ghani and Hazwani Hawa, Mohammad Sobani (2016) Evaluation of Sludge from Coagulation of Palm Oil Mill Effluent with Chitosan Based Coagulant. In: Environmental And Civil Engineering Technology International Conference 2015 (ENVICET'15) , 1-3 December 2015 , Krabi, Thailand. pp. 1-6.. ISSN 0127-9696 (print); 2180-3722 (online)

Mohd Yuhyi, Mohd Tadza and Nur Ain Farhana, Ghani and Hazwani Hawa, Mohammad Sobani (2016) Evaluation of sludge from coagulation of palm oil mill effluent with chitosan based coagulant. Jurnal Teknologi (Sciences and Engineering), 78 (5-4). pp. 19-22. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Yusri, Mohd Yunus and Nurul Ain, Ismail and Badhrulhisham, Abdul Aziz and Anwaruddin, Hisyam and Mohd Aizuddin, Abdul Aziz (2016) Introduction to Separation Index: Modelling of Rare Earth Element Extraction Complexity for Feasible Processing. Journal of Malaysian Critical Metals, 1. pp. 48-64. ISSN 0128-2557. (Published)

Mohd Zaidi, Sidek (2016) Determination of Heat Transfer Coefficient for an Interaction of Sub-cooled Gas and Metal. Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-899X. (Published)

Mohd Zaidi, Sidek and Syahidan, Kamaruddin (2016) Experimental and Numerical Analysis of Metal Radiated by an Infra-Red Heater. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015 , 11-13 October 2015 , Johor Bahru, Johor, Malaysia. .

Mohd Zul Asri, Mohd Ramli (2016) Magnetic field simulation of pinch mode magnetorheological fluid valve. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mokhtar, Siti Umairah and Chin, S. -T. and Kee, C. L. and Low, M. Y. (2016) Rapid determination of sildenafil and its analogues in dietary supplements using gas chromatography–triple quadrupole mass spectrometry. Journal of Pharmaceutical and Biomedical Analysis, 121. pp. 188-196. ISSN 0731-7085. (Published)

Mostafa, Saifuldun and Saad, Hayder and Mustafa, Musa Jaber and Ali, Mohammed Hasan and Dhafer, Karam (2016) The Design Trends of Keystream Generator for Stream Cipher for High Immunity Attacks. In: Advanced Computer and Communication Engineering Technology. Lecture Notes in Electrical Engineering, 362 (1). Springer International Publishing, Switzerland , pp. 877-889. ISBN 978-3-319-24582-9 (Print); 978-3-319-24584-3 (Online)

Muchamad , Oktaviandri and Adnan, Hassan and Awaluddin, Mohd. Shaharoun (2016) Generation of Look-Up Tables for Dynamic Job Shop Scheduling Decision Support Tool. Materials Science and Engineering, 114. pp. 1-9. (Published)

Muhamad Adib, Rinalto (2016) Activated carbon (AC) production from spent mushroom substrate (SMS) from frozen food industry. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Aiman, Mahmud (2016) Sustainable design concept evaluation (SDCE). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Aiman, Muhamad Azmi (2016) Arduino based SPWM three phase full bridge inverter for variable speed drive application. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daniyal, Hamdan).

Muhamad Aslam, Abdul Raub (2016) Condition monitoring of deep drilling process for cooling channel making in hot press die. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Faiz, A Razak (2016) Product improvement by using design for assembly : a case study on heavy duty staple gun. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Faqihiddin Syah, Muhamad Khalil (2016) Investigation of the mechanical properties of Al-SiC MMC fabricated with different particle size. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Faruqi, Zahari and M. S., Najib and Kamarul Hawari, Ghazali and Fathimah, Abdul Halim and Saiful Nizam, Tajuddin and Erny Haslina, Abd Latib (2016) Gaharu Sensor: Classification using Case Based Reasoning (CBR). Journal of Electrical, Electronics, Control and Instrumentations Engineering (JEECIE), 1 (8). pp. 38-41. ISSN 2462-2303. (Published)

Muhamad Faruqi, Zahari (2016) Intelligent classification of ammonia concentration based on odor profile. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhamad Faruqi, Zahari and M. S., Najib and Kamarul Hawari, Ghazali and Fathimah, Abdul Halim and Abdul Aziz, Mohd Azoddein (2016) Classification of Ammonia in water for Oil and Gas Industry using Case Based Reasoning (CBR). Journal of Electrical, Electronics, Control and Instrumentations Engineering (JEECIE), 1 (7). pp. 34-37. ISSN 2462-2303. (Published)

Muhamad Fitri, Othman and Norasikin, Jamburi and Nornizar, Anuar and Syarifah, Abd Rahim and Nurul Hazwani, Rohalim (2016) Ibuprofen-Amino Acids Co-Crystal Screening Via Co-Grinding Methods. In: MATEC Web of Conferences: 5th International Conference on Chemical and Process Engineering (ICCPE 2016) , 23-25 May 2016 , Jeju Island, South Korea. pp. 1-6., 69 (03002). ISSN 2261-236X

Muhamad Hafizuddin, Afiq Anuar and Noorlin, Mohd Ali and Al-Fahim, Mubarak-Ali and Syahrulanuar, Ngah (2016) Door Access System via Fingerprint with GSM (ReSMART). In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 160-164.. ISBN 978-967-2054-04-7

Muhamad Haikal Hazazi, Mohd Rusland (2016) Studies on correlation between electronic structure and electronic conductivity in MoX2 (X = S, Se and Te). Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Muhamad Idaham, Umar Ong and M. A., Ameedeen (2016) A Business Process Modelling and Notation Meta-Model Approach to Enhance Prioritization for Decision-Making in Requirement Engineering. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 8 (6). pp. 109-112. ISSN 2180-1843. (Published)

Muhamad Magffierah, Razali and M. F. F., Ab Rashid and Muhammad Razif, Abdullah Make (2016) Mathematical Modelling of Mixed-Model Assembly Line Balancing Problem with Resources Constraints. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-10., 012002 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhamad Nur Kamal, Awang (2016) Workload, roles and staff development in relation to managing library and media in Terengganu. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhamad Tasyrif, Ghazali (2016) UMP perkenal EAP bantu staf bangunkan budaya cemerlang. UMP News . (Unpublished)

Muhamad Zarith Haiqal, Mohd Jamil (2016) The air compressed powered car. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhamad Zuhairi, Sulaiman and Matsuo, Daisuke and Enoki, Koji and Okawa, Tomio (2016) Systematic Measurements of Heat Transfer Characteristics in Saturated Pool Boiling of Water-Based Nanofluids. International Journal of Heat and Mass Transfer, 102. pp. 264-276. ISSN 0017-9310. (Published)

Muhammad, Mansoor and Mariun, Norman and Toudeshki, Arash and Noor Izzri, Abdul Wahab and Ahmad Umair, Mian and Hojabri, Mojgan (2016) Innovating Problem Solving in Power Quality Devices: A Survey Based on Dynamic Voltage Restorer Case (DVR). Renewable and Sustainable Energy Reviews, 70. pp. 1207-1216. ISSN 1364-0321. (Published)

Muhammad Adib, Abid and Rahman, Md. Arafatur and Azad, Saiful and Hasan, Md. Munirul and Mohammad Hameez, Mat Zin (2016) IoT Enabled Relay Network for Designing An Energy Efficient Highway Lighting System. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 260-266.. ISBN 978-967-2054-04-7

Muhammad Aiman, Ishak (2016) Development of ceramics cutting tool for machining using aluminium oxide reinforced with copper powder. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Aizat, Azed (2016) The potential of calcium carbonate as additive and microwaved sewage sludge ash as cement replacement in mortar brick. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Aizzat, Zakaria (2016) Karnival kerjaya manfaatkan pelajar FKP. UMP News . (Unpublished)

Muhammad Aizzat , Zakaria and Hairi, Zamzuri and Saiful Amri, Mazlan (2016) Dynamic Curvature Steering Control for Autonomous Vehicle: Performance Analysis. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Muhammad Akmal Helmy, Burhanuddin (2016) 38 sukarelawanan PEKA 5 anjur program Lil’ Elephant. CREATE . p. 71. ISSN 1823-7487

Muhammad Akmal Helmy, Burhanuddin (2016) Kesukarelawanan mahasiswa PEKA 5 dalam Lil Elephant. UMP News . (Unpublished)

Muhammad Amir Syahiran, Muhammad Tarminzi (2016) Design and fabrication of dual axis solar system tracker. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Amirul Anshor, Sapiee @ Muhammad Syafiei (2016) Effects of thermal to frequency response function on milling tool using finite element analysis. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Amirul Hadi, Zainal Abidin (2016) The operating characteristic of free public 'Bas Selangorku' in Shah Alam. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Ammar Faris, Muhammad Yazid (2016) Finite element analysis of hybrid energy harvesting of Piezoelectric and electromagnetic. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Azam, Abang Affandi (2016) Development of automatic inserting chain/ring for keyholder. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Azdnan, Amat (2016) Analysis of the influence of viscosity to the liquid film flow between two plates. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Azli, Shukri (2016) Guru Bahasa Jepun UMP diiktiraf. UMP News . (Unpublished)

Muhammad Azli, Shukri (2016) Industry’s recognition to UMP Japanese language teacher. Pekan Review, 11 . p. 50. ISSN 2180-3099

Muhammad Bilal, Muslim and Suriyati, Saleh and Tuan Amran, Tuan Abdullah and Arshad, Ahmad and Noor Asma Fazli, Abdul Samad (2016) Performance Comparison on Biomass Gasification Reactor for Hydrogen Production. In: The 7th International Symposium on Design, Operation and Control of Chemical Processes (PSE ASIA 2016) , 24-27 July 2016 , University of Tokyo, Japan. pp. 1-6.. (Unpublished)

Muhammad Faiz, Mohamed Ameen (2016) Factorial analysis on nitrogen, phosphorus and potassium contents in mushroom waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Farhan, Soed (2016) Behaviour of lightweight beam using EPS beads as partial replacement of aggregates. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Faris Hanif, Yusoff (2016) Microbial cell wall distruption by electroporation. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Hafiz, Ramli and Mohd Arfian, Ismail (2016) Vehicle Assistance Android Application. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 451-454.. ISBN 978-967-2054-04-7

Muhammad Hafizuddin, Basri (2016) Hardware development on auto focuse microscope. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Muhammad Hafizuddin, Rasid (2016) Mahasiswa UMP curah bakti di Kemboja. UMP News . (Unpublished)

Muhammad Haikal, Amirol Lai (2016) The effect of product development and commercialization on competitive advantage. Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Muhammad Hanif, Mohamad Sharif (2016) The effect of different sizes of shredded newspaper on Compressive strength of mortar. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Haniff, Nizulkeman (2016) Preparation and characterization of poly lactic acid (PLA) / polyoxymethylene (POM) blends. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Hariz, Mohamed Idris and Khairunisa, Muthusamy and Rokiah, Othman (2016) Effect of Palm Oil Fuel Ash as Partial Cement Replacement on Strength of Foamed Palm Oil Clinker Concrete. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 115-119..

Muhammad Hariz, Mohamed Idris and Khairunisa, Muthusamy and Rokaih, Othman and Nur Azzimah, Zamri and Muhammad Nazrin Akmal, Ahmad Zawawi and Nasly, Mohamed Ali (2016) Workability and Strength Performance of Foamed Palm Oil Waste Concrete. In: Proceeding – Putrajaya International Built Environment, Technology and Engineering Conference (PIBEC2016) , 24-25 September 2016 , Bangi, Malaysia. pp. 177-184.. ISBN 978-967-13952-8-8

Muhammad Hisyam, Abdullah and Mohamad Idris, Ali and Ngien, S. K. (2016) Analysis for Wind Characteristics in Teluk Kalung, Kemaman, Terengganu. International Journal of Science, Environment and Technology, 5 (6). pp. 3827-3833. ISSN 2277-663X (print); 2278-3687 (online). (Published)

Muhammad Hisyam, Abdullah and Mohamad Idris, Ali and Ngien Su, Kong (2016) Analysis for wind characteristics in Teluk Kalung, Kemaman, Terengganu. International Journal of Science, Environment, 5 (6). pp. 3827-3833. ISSN 2278-3687. (Published)

Muhammad Hisyam, Azman (2016) Design and analysis of unmanned surface vehicle for phytoplankton detection. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Ikram, Mohd Rashid and Hamdan, Daniyal and Aizat, Abd Muttalib (2016) Modeling and Performance Analysis of Plug-In Split Hybrid Electric Vehicle. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 505-511..

Muhammad Ikram, Mohd Rashid and Hamdan, Daniyal and Danial, Mohamed (2016) Comparison Performance of Split Plug-in Hybrid Electric Vehicle and Hybrid Electric Vehicle using ADVISOR. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

Muhammad Ikram, Mohd Rashid and James Ranggi, Johnny Osman (2016) Design and Implementation of Battery Management System for Electric Bicycle. In: Engineering Technology International Conference (ETIC 2016) , 4-5 August 2016 , Ho Chi Minh City, Vietnam. pp. 1-9.. (Unpublished)

Muhammad Ikram, Mohd Rashid and Mohd Khomaini, Mohd Noor and Suliana, Ab Ghani (2016) Self Balancing Unicycle Controlled by Using Arduino. In: International Congress on Natural Sciences and Engineering (ICNSE 2015) , 7-9 May 2015 , Kyoto, Japan. .

Muhammad Irfan, Izham (2016) Effect of A1 doping on the microstructure and electrical transport properties of YBCO superconductor. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Muhammad Izhar, Ishak (2016) Improvement of mobility and stability for small electric vehicle : integration of oversteering characteristic, four wheel drive and independent steering. PhD thesis, Tokai University (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Khairul Anuar, Mohamed and Hasmawani, Hashim and Nor Aida Zuraimi, Md Noar and Norhafizah, Md Sarif and Mohd Zuki, Salleh and Anuar, Ishak (2016) Suction/Injection Effect on a Boundary Layer Flow Past a Stretching Cylinder with Slip Condition. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 739-746..

Muhammad Khairul Anuar, Mohamed and Mohd Zuki, Salleh and Abid, Hussanan and Norhafizah, Md Sarif and Nor Aida Zuraimi, Md Noar and Anuar, Ishak and Widodo, Basuki (2016) Mathematical Model of Free Convection Boundary Layer Flow on Solid Sphere with Viscous Dissipation and Thermal Radiation. International Journal of Computing Science and Applied Mathematics, 2 (2). pp. 20-24. ISSN 2477-5401. (Published)

Muhammad Khairul Anuar, Mohamed and Mohd Zuki, Salleh and Abid, Hussanan and Norhafizah, Md Sarif and Nor Aida Zuraimi, Md Noar and Anuar, Ishak and Widodo, Basuki (2016) Mathematical Model of Free Convection Boundary Layer Flow on Solid Sphere with Viscous Dissipation and Thermal Radiation. International Journal of Computing Science and Applied Mathematics, 2 (2). pp. 20-25. ISSN 2477-5401. (Published)

Muhammad Khairul Anuar, Mohamed and Mohd Zuki, Salleh and Nor Aida Zuraimi, Md Noar and Anuar, Ishak (2016) The Viscous Dissipation Effects on the Mixed Convection Boundary Layer Flow on a Horizontal Circular Cylinder. Jurnal Teknologi (Sciences and Engineering), 78 (4). pp. 73-79. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Muhammad Khairul Anuar, Mohamed and Nor Aida Zuraimi, Md Noar and Mohd Zuki, Salleh and Anuar, Ishak (2016) Free Convection Boundary Layer Flow on a Horizontal Circular Cylinder in a Nanofluid with Viscous Dissipation. Sains Malaysiana, 45 (2). pp. 289-296. ISSN 0126-6039. (Published)

Muhammad Khairul Anuar, Mohamed and Nor Aida Zuraimi, Md Noar and Mohd Zuki, Salleh and Anuar, Ishak (2016) Mathematical Model of Boundary Layer Flow over a Moving Plate in a Nanofluid with Viscous Dissipation. Journal of Applied Fluid Mechanics, 9 (5). pp. 2369-2377. ISSN 1735-3572(Print); 1735-3645(Online). (Published)

Muhammad Khairul Anuar, Mohamed and Nor Aida Zuraimi, Md Noar and Mohd Zuki, Salleh and Ishak, Anuar (2016) Slip flow on Stagnation Point over a Stretching Sheet in a Viscoelastic Nanofluid. In: 4th International Conference on Mathematical Sciences , 15-17th November 2016 , Putrajaya, Malaysia. . (Unpublished)

Muhammad Khairul Anuar, Mohamed and Nor Aida Zuraimi, Md Noar and Zulkhibri, Ismail and Abdul Rahman, Mohd Kasim and Norhafizah, Md Sarif and Mohd Zuki, Salleh and Anuar, Ishak (2016) Slip Effect on Stagnation Point Flow past a Stretching Surface with the Presence of Heat Generation/Absorption and Newtonian Heating. In: 2nd International Conference on Mathematics: Pure, Applied and Computation , 23 November 2016 , Surabaya, Indonesia. . (Unpublished)

Muhammad Khairul Anuar, Mohamed and Norhafizah, Md Sarif and Nor Aida Zuraimi, Md Noar and Mohd Zuki, Salleh and Anuar, Ishak (2016) Viscous Dissipation Effect on the Mixed Convection Boundary Layer Flow towards Solid Sphere. Transactions on Science and Technology, 3 (1-2). pp. 59-67. ISSN 2289-8786. (Published)

Muhammad Khairulhariz, Md Zaki (2016) Thermoelectric cooler ( tec ) for automotive cabin. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Muhammad Muzzammil, Mohd Zuki (2016) Study on mechanical properties and microstructure of Al-SiC composite fabricated with different volume fraction of reinforcement. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Najmi, Ahmat (2016) Productivity improvement using VSM at TT Electronis Sdn Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Naqiuddin, Mat Salleh and M., Ishak and F. R. M., Romlay and Aiman, Mohd Halil (2016) A Study on Bead-on-Plate Welding of AA7075 using Low Power Fiber Laser. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). 2065 -2075. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Muhammad Nazrin Akmal, Ahmad Zawawi and Khairunisa, Muthusamy and Nasly, Mohd Ali (2016) Compressive strength of oil palm shell lightweight aggregate concrete containing clinker as sand replacement. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 165-168.. (Unpublished)

Muhammad Nazrin Akmal, Ahmad Zawawi and Khairunisa, Muthusamy and Norhaiza, Nordin and Nur Azzimah, Zamri and Nasly, Mohamed Ali (2016) Compressive Strength of Palm Oil Waste Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash as Partial Cement Replacement. In: Proceeding – Putrajaya International Built Environment, Technology and Engineering Conference (PIBEC2016) , 24-25 September 2016 , Bangi, Malaysia. pp. 194-199.. ISBN 978-967-13952-8-8

Muhammad Nazrin Akmal, Ahmad Zawawi and Khairunisa, Muthusamy and Shahrul Munir, Abdul Nasir and Mohamad Firdaus, Mohamad Azhar and Aizam, Uzer (2016) Compressive Strength of Brick Containing Crushed Cockle Shell as Partial Sand Replacement. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 529-533..

Muhammad Noor Afiq Witri, Muhammad Yazid and Nor Azwadi, Che Sidik and R., Mamat and G., Najafi (2016) A Review of the Impact of Preparation on Stability of Carbon Nanotube Nanofluids. International Communications in Heat and Mass Transfer, 78. pp. 253-263. ISSN 0735-1933. (Published)

Muhammad Nubli, Abdul Wahab (2016) Bio Transform: The Best Way to Change Your Heart. In: The Invention & New Product Exposition (INPEX) 2016 , 7-9 June 2016 , Pittsburgh, United States of America. p. 1..

Muhammad Nubli, Abdul Wahab and Nazrolnizah, Mohamad Noorzeli and Azham, Abdul Rahman (2016) The Usage of Biofeedback Techniques at Schools In the District of Maran to Invervene Drugs Abuse and Diciplinary Cases. In: Proceedings of International Conference on Knowledge Transfer (ICKT'15) , 1-3 December 2015 , Putrajaya Marriott Hotel, Malaysia. pp. 504-518.. ISBN 978-967-394-255-8

Muhammad Razif, Abdullah Make and M. F. F., Ab Rashid and Muhamad Magffierah, Razali (2016) Modelling of Two-sided Assembly Line Balancing Problem with Resource Constraints. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-9., 160 (012005). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhammad Saufi, Sanusi (2016) Age-related muscle function identification using emg amplitude analysis. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Shafiq, Mohamad Arif (2016) Water irrigation system using sms notification. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Muhammad Shafiq, Mohd Shaberi (2016) Computerize remote control car. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq, Mohd Zamil (2016) Modeling and mechanical properties of glass fiber reinforced nylon. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Yazid, Muhammad Ammar Faris and Jamil, Norlida and Muhmed Razali, Nik Nurul Husna and Yusoff, A. R. (2016) Finite element analysis of hybrid energy harvesting of piezoelectric and electromagnetic. In: MATEC Web of Conferences; 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016 , 2 - 3 August 2016 , Cyberjaya, Selangor. pp. 1-10., 90 (01039). ISSN 2261-236X

Muhammad Yusran, Abdul Aziz and Nadiah, Abu and Yeap, Swee Keong and Ho, Wan Yong and Abdul Rahman, Omar and Nor Hadiani, Ismail and Syahida, Ahmad and Pirozyan, Mehdi R. and Akhtar, Muhammad Nadeem and Noorjahan Banu, Alitheen (2016) Combinatorial Cytotoxic Effects of Damnacanthal and Doxorubicin Against Human Breast Cancer MCF-7 Cells in Vitro. Molecules, 21 (9). pp. 1-15. ISSN 1420-3049 (print); 1420-3049 (online). (Published)

Muhammad Zulfahmi Toh, Abdullah and Noraziah, Ahmad and Mohammad Affendy, Omardin and Nursharina, Zainuddin (2016) Managing building checkist plans Using BUSCLIS. International Journal of Software Engineering & Computer Sciences (IJSECS), 2. pp. 74-88. ISSN 2289-8522. (Published)

Muhammad Zulfikri, Ibrahim (2016) Wind hazard mapping in Peninsular Malaysia using geographical information system. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Zulhilmi, Haris (2016) Assessment of kinematic performance of A4-wheels ground vehicle in a structured terrain environment. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhd Nur Hakimi, Mazlan (2016) Effects of training on employees performance of construction firms in Pahang. Faculty of Industrial Management, Universiti Malaysia Pahang.

Muhideen Abbas, Hasan and Fahmi, Samsuri and Gan, Kok Beng (2016) A Novel Photoplethysmograph Sensor Probe Design For Motion Artifact Detection: A Comparison Study With Three Axis Accelerometer. Journal of Theoretical and Applied Information Technology, 94 (1). pp. 142-150. ISSN 1992-8645 (print); 817-3195 (online). (Published)

Mukhlish, M. Zobayer and Khan, Maksudur R. and Islam, A.R. and Akanda, A.N.M.S. (2016) Removal of Reactive Dye from Aqueous Solution Using Coagulation–Flocculation Coupled with Adsorption on Papaya Leaf. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1884-1894. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Munirah Ezzah, Tuan Zakaria and Norlirabiatuladawiyah, Che Ani and Saidatul Shima, Jamari and Suriati, Ghazali and Khan, Tanveer Ahmed and Mohd Faizal, Ali (2016) Effect of Mixing towards the Production of Carbonaceous Kenaf Fiber via Hydrothermal Carbonization Process. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 122-127. ISSN 1991-8178. (Published)

Mushtaq, Najeeb and Ramdan, Razali and K. G., Mohammed and Hamdan, Daniyal and Ali, M. Humada (2016) PID Parameters Improvement for AGC in Three Parallel-Connected Power Systems. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 544-551..

Muslim, Muhammad (2016) Estimating discharge in ungauged catchment of Sungai Muar. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muthanna , Jamil and Noraini, Mohd Razali (2016) Simulation of Assembly Line Balancing in Automotive Component Manufacturing. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Muzafar, A. K. and Rashidi, M. M. and Mahadzir, Ishak and Shayfull, Z. (2016) Effect on Mechanical Properties of Heat Treated High Manganese Austenitic Cast Iron. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-8., 78 (01081). ISSN 2261-236X

Muzafar, A. K. and Rashidi, M. M. and Mahadzir, Ishak and Shayfull, Z. (2016) Investigation on Microstructure of Heat Treated High Manganese Austenitic Cast Iron. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-9., 78 (01079). ISSN 2261-236X

Muzamir, Hasan (2016) Capsize of Bulk Cargo Carrying Bauxite from Kuantan: Investigation of Geotechnical Properties of Kuantan Bauxite. In: International Symposium Between Centre for Earth Resources Research & Management (CERRM) UMP with Yamaguchi University, Japan , 17-18 October 2016 , Kuantan, Pahang. pp. 1-45..

Muzamir, Hasan (2016) Capsize of Bulk Cargoes Carrying Bauxite from Kuantan: Investigation of Geotechnical Properties of Kuantan Bauxite. In: Seminar on Engineer Subject Matter Expert Exchanges (SMEE) In Collaboration with US Pacific Fleet (USPACFLT) and Malaysian Army , 8 August 2016 , UMP Gambang Campus, Pahang Darul Makmur. pp. 1-39..

Muzamir, Hasan (2016) Geotechnical and Morphological Properties of Kuantan Bauxite. In: National Awareness Workshop on the Implementation of The International Maritime Solid Bulk Cargoes (IMSBC) Code , 25-28 April 2016 , Kuantan, Pahang. pp. 1-39..

Muzamir, Hasan and Alrubaye, Ali Jamal and Leong, Kah Seng and Mohammad Syafiq, Ideris and Aminaton, Marto (2016) Undrained Shear Strength of Soft Clay Mixed With Different Percentages of Lime and Silica Fume. Jurnal Teknologi (Sciences and Engineering), 78 (8-5). pp. 23-30. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Muzamir, Hasan and Norhayani, Pangee @ Mohd Nor and Suki, Suzillco (2016) Shear Strength of Soft Clay Reinforced with Single Encased Bottom Ash Columns. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1562-1569. ISSN 1819-6608. (Published)

Muzamir, Hasan and Nurul Aina, Husaini and Norhayani, Pangee @ Mohd Nor (2016) Strength of Soft Clay Reinforced with Square and Triangular Pattern Encapsulated Bottom Ash Columns. In: Second International Conference on Science, Engineering & Environment (SEE 2016) , 21-23 November 2016 , Osaka City, Japan. pp. 320-326.. ISBN 978-4-9905958-7-6

N., Shamsinar and Syed Mohd Saufi, Tuan Chik (2016) Adsorptive Cation Exchanger Mixed Matrix Membrane Chromatography for the Isolation of Lysozyme from Chicken Egg White. Arabian Journal for Science and Engineering. pp. 1-7. ISSN 1319-8025 (print); 2191-4281 (online). (Published)

N., Yaacob and Ahmad Salihin, Samsudin (2016) Proton conducting biopolymer membrane electrolytes based on kappa carrageenan doped NH4BR : Structural and ionic conductivity study. In: 2nd International Conference on Advances in Functional Materials (AFM 2016) , 8-11 August 2016 , Jeju Island, South Korea. . (Unpublished)

N., Zainol and N., Masngut and S. N., Ismail (2016) Effect of Pre-treatment Processes to Ferulic Acid Extraction from Banana Stem Waste. In: The 3rd International Conference on Agricultural and Food Engineering (CAFEI2016) , 23-25 August 2016 , The Seri Pacific Hotel Kuala Lumpur. pp. 332-337.. ISBN 978-967-960-401-6

N., Zainol and Nanthienie, Thangaperumal and N. H., Aziz (2016) Kinetic Study on Flooded Soil Recovery Using Soil Containing Arbuscular Mycorrhizal Fungi. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-7., 78 (01087). ISSN 2261-236X

N., Zainol and Nanthienie, Thangaperumal and Nur Hanisah, Zahari and Nor Hazwani, Aziz (2016) Factorial Analysis on Flooded Soil Recovery using Soil Containing Arbuscular Mycorrhizal Fungi. In: The 2nd Electronic and Green Materials International Conference (EGM 2016) , 1-2 May 2016 , Phuket, Thailand. . (Unpublished)

N. A. M. A., Zainal and Muhamad Arifpin, Mansor and S. N., M. Saffe (2016) Development of A Dynamic Network DEA Model To Measure Production Line's Performance: A Conceptual Paper. In: Second International Conference on Science, Engineering & Environment (SEE 2016) , 21-23 November 2016 , Osaka City, Japan. pp. 1-6.. ISBN 978-4-9905958-7-6

N. A. M. A., Zainal and Muhamad Arifpin, Mansor and S. N., M. Saffe (2016) Development of a Network DEA Model to Measure Production Line’s Performance: A Conceptual Paper. In: 2nd International Conference on Engineering, Technology and Management (ICETM 2016) , 19-20 August 2016 , Kuala Lumpur, Malaysia. pp. 1-5..

N. F., Yah and M. S., Idris and A. N., Oumer (2016) Numerical Investigation on Effect of Immersed Blade Depth on the Performance of Undershot Water Turbines. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00035). ISSN 2261-236X

N. F. A., Shafie and J. M., Uloi and A. M., Som and Nour, A. H. and Zulkafli, Hassan and R. M., Yunus and A., Yahya (2016) The Performance Study of Ultrasonic-Assisted Membrane Anaerobic System (UMAS) in Palm Oil Mill Effluent (POME) Treatment. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 20-26. ISSN 1991-8178. (Published)

N. H., Ramli and N. E., Badrul Hisham and Farhan, Mohd Said and T., Mariyappan (2016) The Effect of Weight Ratio on the Physiochemical Properties of Compost From Palm Oil Mill Effluent (POME) Sludge and Decanter Cake. Australian Journal of Basic and Applied Sciences, 10 (17 (Special)). pp. 34-39. ISSN 1991-8178. (Published)

N. H., Zakaria and N. M. Zuki, N. M. and A. N. M., Rose and M. F. F., Ab Rashid (2016) Lean Manufacturing Implementation in Small and Medium Industry. In: 20th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES2016) , 5-7 September 2016 , York, United Kingdom. . (Unpublished)

N. M., Mohktar and Lau, W. J. and A. F., Ismail and S., Kartohardjono and Lai, S. O. and H. C., Teoh (2016) The Potential of Direct Contact Membrane Distillation for Industrial Textile Wastewater Treatment Using PVDF-Cloisite 15A Nanocomposite Membrane. Chemical Engineering Research and Design, 111. pp. 284-293. ISSN 0263-8762. (Published)

N. M., Yahya and Tokhi, M. Osman and Kasdirin, Hyreil Anuar (2016) A New Bats Echolocation-based Algorithm for Single Objective Optimisation. Evolutionary Intelligence, 9 (1). pp. 1-20. ISSN 1864-5909 (Print); 1864-5917 (Online). (Published)

N. N., Razak and A. A., Razak and C. G., Pretty and N. H., Ahamad and F. M., Suhaimi and Ummu Kulthum, Jamaludin (2016) Trial Protocol Analysis of Nursing Workload Intensity within ICU. In: International Conference for Innovation in Biomedical Engineering and Life Sciences. IFMBE Proceedings, 56 . Springer, Singapore, pp. 294-297. ISBN 978-981-10-0265-6 (Print); 978-981-10-0266-3 (Online)

N. S. M., Noor and Z., Ghazalli and R., Mamat and K., Kadirgama and M. S. M., Sani and Z., Ahmad and Nasrul Hadi, Johari (2016) The enhancement of driver seat comfort for small size car: a preliminary study. Malaysian Journal of Public Health Medicine, 16 (Suppl. 1). pp. 108-114. ISSN 1675-0306. (Published)

N. S. M., Shalahim (2016) The relationship between anthropometry and hand grip strength among older Malaysian people. PhD thesis, University of Malaya (Contributors, UNSPECIFIED: UNSPECIFIED).

N. T., Rao and A. N., Oumer and Ummu Kulthum, Jamaludin and A. Y., Adam (2016) Numerical Analysis of Flow and Heat Transfer Characteristics of CO2 at Vapour and Supercritical Phases in Micro-Channels. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00011). ISSN 2261-236X

N. Z. M., Zaid and M. R. M., Rejab and A. F., Jusoh and Bachtiar, Dandi and Siregar, J. P. (2016) Finite Element Analysis of Trapezoidal Corrugated-Core for Sandwich Structure. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

N. Z. M., Zaid and M. R. M., Rejab and A. F., Jusoh and Bachtiar, Dandi and Siregar, J. P. and Zhang, Dian Ping (2016) Fracture Behaviours in Compression-loaded Triangular Corrugated Core Sandwich Panels. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture ((IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-9., 78 (01041). ISSN 2261-236X

N. Z. M., Zaid and M. R. M., Rejab and N. A. N., Mohamed (2016) Sandwich Structure Based On Corrugated-Core: A Review. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00029). ISSN 2261-236X

N.A., Che Azhar and Muhamad Arifpin, Mansor and S. A., Rusdan and S. N., M. Saffe (2016) Development of Two-Stage Network Data Envelopment Analysis (DEA) Model to Measure Production Line’s Performance: Combination of Automation and Labor. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 37-43. ISSN 2289-697X. (Published)

Nabiilah, Ab Rahim and Zamzuri, Hamedon and Faiz, Mohd Turan and Ismed, Iskandar (2016) Reducing Bits in Electrodeposition Process of Commercial Vehicle - A Case Study. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Nabil Zhafri, Mohd Nasir (2016) Kalman filter implementation on localization of mobile robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nabilah, Md Mashod Fakeh (2016) Undrained shear strength of soft clay reinforce with single 16mm diameter encapsulated bottom ash column. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nadia, Refat and Hafizoah, Kassim (2016) From Cognitive to Meta-cognitive Strategies: Integration of Grammar Learning in MALL Environment. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 820-823..

Nadiah, Abu and Akhtar, Muhammad Nadeem and Swee, K. Yeap and Kian, Lam Lim and Wan, Yong Ho and Mohd Puad, Abdullah and Chai, Ling Ho and Abdul Rahman, Omar and Jamil, Ismail and Noorjahan Banu, Alitheen (2016) Flavokawain B Induced cytotoxicity in Two Breast Cancer Cell Lines, MCF-7 and MDA-MB231 and Inhibited the Metastatic Potential of MDA-MB231 via the Regulation of Several Tyrosine Kinases In vitro. BMC Complementary and Alternative Medicine, 16 (86). pp. 1-14. ISSN 1472-6882. (Published)

Nadiah, Abu and Swee, K. Yeap and Ahmad Z., Mat Pauzi and Akhtar, Muhammad Nadeem and Nur R., Zamberi and Jamil, Ismail and Seema, Zareen and Noorjahan Banu, Alitheen (2016) Dual Regulation of Cell Death and Cell Survival upon Induction of Cellular Stress by Isopimara-7,15-Dien-19-Oic Acid in Cervical Cancer, HeLa Cells In vitro. Frontiers in Pharmacology, 7 (89). pp. 1-11. ISSN 1663-9812. (Published)

Nadiah, Hudoh @ Ramli (2016) Qualitative research into motivations and barriers to cycling in UMP campus. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nadiatul Adilah, Ahmad Abdul Ghani (2016) Investigation into the robustness of evolutionary programming regression for sedimentation study. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1555-1561. ISSN 1819-6608. (Published)

Nadiatul Adilah, Ahmad Abdul Ghani and Noor Asiah, Mohamad and Teo, Wei Hui (2016) Rainfall Analysis to Determine the Potential of Rainwater Harvesting Site in Kuantan, Pahang. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7264-7268. ISSN 1819-6608. (Published)

Nafrizuan, Mat Yahya (2016) Bats echolocation-inspired algorithms for global optimisation problems. PhD thesis, The University of Sheffield (Contributors, UNSPECIFIED: UNSPECIFIED).

Nafrizuan, Mat Yahya and M. Nafis, O. Z. (2016) Application of adaptive bats sonar algorithm for solving a single objective of practical business optimisation problem PROBLEM. In: The 4th International Conference on Artificial Intelligence and Computer Science (AICS2016) , 28 - 29 November 2016 , Langkawi, Malaysia. pp. 84-96.. ISBN 978-967-11768-3-2

Naif, Yasir Hashim (2016) Nanowire NMOS Logic Inverter Characterization. Journal of Nanoscience and Nanotechnology, 16 (6). pp. 5923-5928. ISSN 1533-4880 (Print); 1533-4899 (Online). (Published)

Naif, Yasir Hashim (2016) A New Simulation Model for Nanowire-CMOS Inverter Circuit. In: The 2016 International Conference on Advanced Informatics: Concepts, Theory and Application (ICAIATA 2016) , 16-19 August 2016 , Penang, Malaysia. pp. 1-6.. ISBN 978-1-5090-1636-5

Naif, Yasir Hashim (2016) Optimization of Channel Length Nano-Scale SiNWT Based SRAM Cell. In: AIP Conference Proceeding: International Conference on Advanced Science, Engineering and Technology (ICASET 2015) , 21-22 December 2015 , Penang, Malaysia. pp. 1-7., 1774 (050020). ISBN 978-0-7354-1432-7

Nair, Anju V. and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh (2016) Mathematical Formulation to Study the Thermal Post Buckling of Orthotropic Circular Plates. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 933-938..

Najafi, G. and Ghobadian, B. and Moosavian, A. and Yusaf, T. and R., Mamat and M., Kettner and Azmi, W. H. (2016) SVM and ANFIS for Prediction of Performance and Exhaust Emissions of a SI Engine with Gasoline–Ethanol Blended Fuels. Applied Thermal Engineering, 95. pp. 186-203. ISSN 1359-4311. (Published)

Najeeb, Mushtaq and Shahooth, Mohammed and Mohaisen, Arrak and Ramdan, Razali and Hamdan, Daniyal (2016) An Optimized PID Parameters for LFC in Interconnected Power Systems Using MLSL Optimization Algorithm. ARPN Journal of Engineering and Applied Sciences, 11 (19). pp. 11770-11781. ISSN 1819-6608. (Published)

Najiha, M. S. and M. M., Rahman (2016) Experimental Investigation of Flank Wear in end Milling of Aluminum Alloy with Water-Based TiO2 Nanofluid Lubricant in Minimum Quantity Lubrication Technique. The International Journal of Advanced Manufacturing Technology. pp. 1-11. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2016) Environmental Impacts and Hazards Associated With Metal Working Fluids and Recent Advances in the Sustainable Systems: A Review. Renewable and Sustainable Energy Reviews, 60. pp. 1008-1031. ISSN 1364-0321. (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Minimum Quantity Lubrication: Quantifying Non-Deterministic Component Of Sustainability Index For Machining Operations. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3190-3200. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Parametric Optimization of End Milling Process Under Minimum Quantity Lubrication With Nanofluid as Cutting Medium Using Pareto Optimality Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3345-3360. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Performance Of Water-Based TiO2 Nanofluid During The Minimum Quantity Lubrication Machining Of Aluminium Alloy, AA6061-T6. Journal of Cleaner Production, 135. pp. 1623-1636. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Najihah, S. N. and Shayfull, Z. and Nasir, S. M. and Mohd Sazli, Saad and Rashidi, M. M. and Fathullah, M. and Noriman, N. Z. (2016) Analysis of Shrinkage on Thick Plate Part using Genetic Algorithm. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-12., 78 (01083). ISSN 2261-236X

Najmi Hafizi, Zabawi (2016) Parking lot detection using tunable two- mode region of interest. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nandiyanto, Asep Bayu Dani and Munawaroh, Heli Siti Halimatul and Kurniawan, Tedi and Mudzakir, Ahmad (2016) Influences of Temperature on the Conversion of Ammonium Tungstate Pentahydrate to Tungsten Oxide Particles with Controllable Sizes, Crystallinities, and Physical Properties. Indonesian Journal of Chemistry, 16 (2). pp. 124-129. ISSN 1411-9420 (Print); 2460-1578 (Online). (Published)

Naqib Hakim, Kamarudin and A. K., Prasada Rao and Azmir, Azhari (2016) CFD based erosion modelling of abrasive waterjet nozzle using discrete phase method. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (012016). ISSN 1757-8981 (Print), 1757-899X (Online)

Nasir, Akhyari and Ruzaini, Abdullah Arshah and Mohd Tamizan, Abu Bakar (2016) Exploring Studies of Information Security Culture in Malaysia. In: 2nd International Conference on Information Technology (ICET 2016) , 6-7 August 2016 , DITC, TATI University College (TATIUC), Malaysia. pp. 1-5.. (Unpublished)

Nasrah, Mohd Azmi (2016) Fabrication & properties of aluminium-aluminium oxide (Al/Al2o3) composite material. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nasser, Abdul B. and Alsewari, Abdulrahman A. and Mu’azu, Aminu A. and Kamal Z., Zamli (2016) Comparative Performance Analysis of Flower Pollination Algorithm and Harmony Search based strategies: A Case Study of Applying Interaction Testing in the Real World. In: Proceeding Book: 2nd International Conference on New Directions in Multidisciplinary Research & Practice , 12-13 May 2016 , Istanbul, Turkey. pp. 1-5.. ISSN 2325-0887 ISBN 978-969-9948-47-3

Nassir Sallom , Kadhim and Mohammed, Muamer N. and Mazlina, Abdul Majid and Sinan Q., Mohamd (2016) An Efficient Route Selection Based on AODV Algorithm for VANET. In: The Fifth International Conference On Computer Science & Computational Mathematics (ICCSCM 2016) , 5-6 May 2016 , Langkawi, Malaysia. pp. 1-6., 9 (38). ISSN (Print) 0974-6846; (Online) 0974-5645

Natrah, Zulkipli (2016) The effectiveness recruitment method of employee in the fast food industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Naufal, Shamsuddin (2016) Naib Canselor Universiti Malaysia Pahang (UMP) mengacau bubur lambuk. Berita Harian . p. 5.

Nazani, Nazri and Shahrani, Anuar and F., Basrawi and Ahmmad Shukrie, Md Yudin and Siti, Aishah (2016) Estimation of Energy Potential and Power Generation from Tidal Basin in Coastal Area of Malaysia. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-8., 38. ISSN 2261-236X

Nazathul Najwa, Sulaiman (2016) A study of flexural strength of rectangular beam using polystyrene beads as a partial replacement of fine aggregates. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nazira, Azman and Sarah Nabiha, Hamdan and Nor Azhar, Ahmad (2016) Teaching Technique Support System Based on Classroom Indoor Air Quality (IAQ) Analysis. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 395-402.. ISBN 978-967-2054-04-7

Nazrin, Sharom (2016) Performance of eco process pozzolann foamed concrete as cement replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nazriyah, Haji Che Zan @ Che Zain (2016) Intelligent non-destructive classification of josapine pineapple maturity using artificial neural network. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nazrolnizah, Mohamad Noorzeli and Muhammad Nubli, Abdul Wahab (2016) A Study of the Usage of Biofeedback Techniques to Improve Self Performance and HRV Profile Among Ikhtiar Malaysia Entrepreneurs. Malaysian Journal of Social Sciences and Humanities (MJ-SSH), 1 (3). pp. 1-13. ISSN 2504-­‐8562. (Published)

Neo, Chan Loong (2016) Intelligent home automation system (IHAS) with security protection. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Ng, K. H. and Cheng, C. K. (2016) Photo-polishing of palm oil mill effluent (POME) over UV/ZnO system. In: International Conference on Catalysis 2016 (ICAT 2016) , 20-21 September 2016 , Grand Bluewave Hotel, Johor Bahru. p. 1.. (Unpublished)

Ng, Keat Yong (2016) Integrated assessment method for underground power cable performance. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ng, Kim Hoong and Cheng, C. K. (2016) Photo-polishing of POME into CH4-Lean Biogas over The UV-Responsive ZnO Photocatalyst. Chemical Engineering Journal. ISSN 1385-8947. (In Press / Online First) (In Press / Online First)

Ng, Kim Hoong and Cheng, Yoke Wang and Khan, Maksudur R. and Cheng, C. K. (2016) Optimization of Photocatalytic Degradation of Palm Oil Mill Effluent in UV/ZnO system based on Response Surface Methodology. Journal of Environmental Management, 184 (Pt. 3). pp. 487-493. ISSN 0301-4797. (Published)

Ng, Kim Hoong and Lee, Chea Hui and Khan, Maksudur R. and Cheng, C. K. (2016) Photocatalytic Degradation of Recalcitrant POME Waste by using Silver Doped Titania: Photokinetics and Scavenging Studies. Chemical Engineering Journal, 286. pp. 282-290. ISSN 1385-8947. (Published)

Ng, Noveen Nico Alexandra and A. A. A., Ahmad Shamsuddin and M. M., Hasin and N. S., Mazlan and M. L., Mohd Isnin (2016) Design and Development of Ion Probe Testing on Four Stroke Engine Model. In: 2nd Integrated Design Project Conference (IDPC) 2015 , 11 Dec 2015 , Universiti Malaysia Pahang (UMP). pp. 1-18..

Ng, Zone Fhong and Akbari, Abolghasem (2016) ASTER-DEM Derived Flood Inundation Map Using 1D-2D Flood Modeller Pro in Kuantan River Basin. In: 2nd International Congress on Technology - Engineering & Science (ICONTES) , 282-29 July 2016 , Kuala Lumpur, Malaysia. .

Ngien, S. K. and Chin, Pei Qi and Muzamir, Hasan and Mohamad Idris, Ali and Mohd Yuhyi, Mohd Tadza and Norhaniza, Abd. Rahman (2016) Image Analysis of Non-Aqueous Phase Liquid Migration in Aggregated Kaolin. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6393-6398. ISSN 1819-6608. (Published)

Nidzamuddeen, Ishak (2016) Energy management practices and implementation in campus building. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Afieza, Che Azhar (2016) Development of a two-stage network data envelopment analysis (DEA) model to analyze production line's performance : combination of automation and labor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Aloesnita, Nik Mohd Alwi (2016) Glocal Mobility Model: Promoting Language Learning and Intercultural Competence in Open Education. In: MQA & IQA International Seminar on Quality Assurance of Higher Education and Roundtable Meeting (2016 MISQAHE) , 17-18 October 2016 , Petaling Jaya, Malaysia. pp. 1-28..

Nik Aloesnita, Nik Mohd Alwi and Umi Kalsom, Masrom (2016) Designing Task Complexity in Promoting Language Performance. In: 3rd International Innovative Practices in Higher Education Expo 2016 (I-PHEX 2016) , 9-10 August 2016 , Kuala Lumpur, Malaysia. pp. 1-3.. (Unpublished)

Nik Amirulmu'min, Nik Min (2016) Rapid Kuantan luaskan liputan. Berita Harian .

Nik Naizi, Husin (2016) UMP students travel to Banda Aceh to help orphans. The Star . p. 4.

Nik Nor Aziati, Abdul Aziz and Mimi Sakinah, A. M. (2016) Characterization Of Raw Material (Glycerol Residue) And Escherichia Coli In Immobilized Cell For Succinic Acid Production. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 902-907..

Nik Nor Aziati, Abdul Aziz and Mimi Sakinah, A. M. (2016) Effect of Time, Inoculum size (%) and Mass Substrate on succinic acid production from glycerol residue using immobilized Escherichia Coli. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 75-83. ISSN 1991-8178. (Published)

Nik Nor Aziati, Abdul Aziz and Mimi Sakinah, A. M. (2016) Optimization of Succinic Acid from Fermentation Process by Using Immobiized Escherichia Coli Cells Via Anaerobic Fermentation. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 908-912..

Nik Nurulhusna, Muhmed Razali (2016) Vision system for strain measurement in tensile test of boron sheet metal. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nik Rohani, Nik Mustapa and Muhammad Nor Fazli, Abd Malek and M. M., Yusoff and Lutfor, M. R. (2016) Ion Imprinted Polymers for Selective Recognition and Separation of Lanthanum and Cerium Ions from other Lanthanide. Separation Science and Technology, 51 (7). pp. 2762-2771. ISSN 0149-6395 (Print) 1520-5754 (Online). (Published)

Nik Ruqiyah, Nik Hassan and Farah Amira, Mohd Ghazali and Abdul Aziz, Jaafar and Noor Mazni, Ismail (2016) Preparation of polypropylene thermoplastic container via thermoforming process. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-10., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Nik Sukry, Ramli (2016) Makan tengah hari RM1. Berita Harian .

Nik Sukry, Ramli (2016) Pelajar UMP hasilkan penawar kencing manis. Berita Harian .

Nik Sukry, Ramli (2016) UMP komited tingkat kemahiran industri, belia. Berita Harian . p. 31.

Nina Farhana, Mohd Jamaludin (2016) Biogas production from poultry manure wastewater using soil mixed culture. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: Zainol, Norazwina).

Nissa Dayanah, Mohd Anuar (2016) Sulfide elimination by using an aerobic sequencing batch reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nitthiyah, Jeyaratnam (2016) A comparative study of cinnamomum cassia (CINNAMON) bark oil extraction through hydrodistillation (HD) and microwave assisted hydrodistillation (MAHD). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdurahman Hamid, Nour).

Nitthiyah, Jeyaratnam and Nour, A. H. and Akindoyo, John Olabode (2016) Comparative Study between Hydrodistillation and Microwave-assisted Hydrodistillation for Extraction of Cinnamomum Cassia Oil. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2647-2652. ISSN 1819-6608. (Published)

Nitthiyah, Jeyaratnam and Nour, A. H. and Akindoyo, John Olabode (2016) The Potential of Microwave Assisted Hydrodistillation in Extraction of Essential Oil from Cinnamomum Cassia (cinnamon). ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2179-2183. ISSN 1819-6608. (Published)

Nitthiyah, Jeyaratnam and Nour, A. H. and K., Ramesh and Akindoyo, John Olabode (2016) Mechanism of Microwave Assisted Hydrodistillation Studied Through Heat Analysis. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 445-452..

Nitthiyah, Jeyaratnam and Nour, A. H. and K., Ramesh and Azhari, H. Nour and A. R., Yuvaraj and Akindoyo, John Olabode (2016) Essential Oil from Cinnamomum Cassia Bark Through Hydrodistillation and Advanced Microwave Assisted Hydrodistillation. Industrial Crops and Products, 92. pp. 57-66. ISSN 0926-6690. (Published)

Noah Arputharaj, Nhanam (2016) On the microstructure properties correlation of the recycled aluminium alloy. Faculty of Manufacturing Engineering Theses Gred A, Universiti Malaysia Pahang.

Noor Adilah, Md Salehan and Ahmad Ziad, Sulaiman and Azilah, Ajit (2016) Effect of Temperature and Sonication on The Extraction of Gallic Acid from Labisia Pumila (Kacip Fatimah). ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2193-2198. ISSN 1819-6608. (Published)

Noor Afifah, Fauzi and Siti Hajar, Mohd Rasdi and Makky, Essam A. and Mohd Hasbi, Ab. Rahim (2016) Bioremediation of Disposed X-Ray Film For Enzymes Production. Global Journal of Advanced Research, 3 (2). pp. 101-106. ISSN 2394-5788 . (Published)

Noor Afiza, Mohd Asmi (2016) Eksplorasi Fotografi Shutterbuster serlah kreativiti. CREATE . p. 69. ISSN 1823-7487

Noor Afiza, Mohd Asmi (2016) Eksplorasi fotografi Shutterbuster serlah kreativiti. UMP News . (Unpublished)

Noor Afiza, Mohd Asmi (2016) Kumpulan Teater Senandika raih naib juara. UMP News . (Unpublished)

Noor Aina Suhaila, Anuar (2016) Synthesis and characterizations of bio-phenolic furfural resins via liquefaction and resinification of empty fruit bunch fibres. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Noor Amalina, Abdull Manaf (2016) A study on the success factors of women in construction industry in Kota Bharu, Kelantan. Faculty of Industrial Management, Universiti Malaysia Pahang.

Noor Athirah, Ismail (2016) Fabrication of nickel-cobalt intermetallic nanotapes by electrospinning. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Noor Atiqah, Sulaiman (2016) Kerjasama sedia latihan industri. Berita Harian .

Noor Azlinda, Zainal Abidin (2016) Kursus KTP Kindy bantu pengasuh tingkat kemahiran Bahasa Inggeris. UMP News . (Unpublished)

Noor Azlinda, Zainal Abidin and Zuraina, Ali (2016) Maximizing the Use of Edmodo in Writing with the Aids of Online Collaborative Learning Tools. In: TESOL Indonesia 2016 International Conference , 11-13 August 2016 , University of Mataram, Lombok, Indonesia. .

Noor Elisurianie, Salehudin and Kamaazura, Abu Bakar and Ahmad Shahnun, Ibrahim (2016) Point of Selection of Working Adult to Further Their Study in Higher Education Institutions: Evidence from Pahang State of Malaysia. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 58-64..

Noor Raha, Mohd Radzuan and Sarjit, Kaur (2016) Engineering Students' Communication Apprehension and Competence in Technical Oral Presentations. In: Handbook of Research on Effective Communication, Leadership, and Conflict Resolution. IGI Global, USA, pp. 371-383. ISBN 9781466699700 (Print); 9781466699717 (Online)

Noor Raha, Mohd Radzuan and Wan Syariza, Wan Yadri (2016) Sukarelawan: Peradaban Serta Sifat Ketamadunan. CREATE . pp. 102-103. ISSN 1823-7487

Noor Raha, Mohd Radzuan and Zarina, Mohd Ali and Abdullah Adnan, Mohamed and Nurkarimah, Yusof (2016) MIM-GA: Measuring Non-Native Students’ Group Attitude (GA) in using Mobile Instant Messaging (MIM) in Learning English. Asian EFL Journal, 4 (13). pp. 110-123. ISSN 1738-1460. (Published)

Noor Sabrina, Ahmad Mutamim and Chin, Hong Neoh and Zainura, Zainon Noor and Chi, Kim Lim (2016) Green technology in Wastewater Treatment Technologies: Integration of Membrane Bioreactor with Various Wastewater Treatment Systems. Chemical Engineering Journal, 283. pp. 582-594. ISSN 1385-8947. (Published)

Noor Sarbani, Wan Muhammad and Shariman, Mustafa and Syed Radzi, Rahamaddulla and S. A., Che Ghani and Anwaruddin, Hisyam (2016) Technical and Economic Feasibility Study of Coconut Shell Charcoal Production as precursor to Activated Carbon in East Coast Malaysia. In: Advances in Business Research International Conference (ABRIC2016) , 16-17 November 2016 , Langkawi, Malaysia. pp. 1-11.. (Unpublished)

Noor Suhana, Sulaiman and Rohani, Abu Bakar (2016) Rough Set Discretization: Equal Frequency Binning, Entropy/MDL and Semi Naives Algorithms of Intrusion Detection System. In: Advances in Digital Technologies: Proceedings of the 7th International Conference on Applications of Digital Information and Web Technologies 2016. Frontiers in Artificial Intelligence and Applications, 282 . IOS Press, Amsterdam, pp. 77-87. ISBN 978-1-61499-636-1 (print); 978-1-61499-637-8 (online)

Noor Suhana, Sulaiman and Rohani, Abu Bakar (2016) Rough Set Discretize Classification of Intrusion Detection System. Journal of Engineering and Applied Sciences, 11 (3). pp. 488-496. ISSN 1816-949x (Print); 1818-7803 (Online). (Published)

Noor Suhana, Sulaiman and Rohani, Abu Bakar (2016) Rough Set Significant Reduction and Rules of Intrusion Detection System. In: Advances in Digital Technologies: Proceedings of the 7th International Conference on Applications of Digital Information and Web Technologies 2016. Frontiers in Artificial Intelligence and Applications, 282 . IOS Press, Amsterdam, pp. 65-76. ISBN 978-1-61499-636-1 (print); 978-1-61499-637-8 (online)

Noor Suhana, Sulaiman and Rohani, Abu Bakar (2016) Rough set discretization: Equal frequency binning, entropy/MDL and semi naives algorithms of intrusion detection system. In: 7th International Conference on Applications of Digital Information and Web Technologies, ICADIWT 2016 , 29-31 March 2016 , National Taiwan Ocean University Keelung; Taiwan. pp. 77-87., 282. ISSN 09226389 ISBN 978-161499636-1

Noor Syafiqah, Hassin (2016) Effect of activated carbon to the structural properties of copper zinc ferrite prepared via mechanosynthesis. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Noor Syahidah, Sabran (2016) CAIC anjur Bengkel Penyediaan & Pembangunan Laluan Kerjaya Staf Akademik. CREATE . p. 22. ISSN 1823-7487

Noor Syahidah, Sabran (2016) Kongsi amalan terbaik dengan pemenang AAN. UMP News . (Unpublished)

Noorfatinah, Fauzi (2016) The perception of fairness of staff selection procedure and its influence on anxiety among successful candidates. Faculty of Industrial Management, Universiti Malaysia Pahang.

Noorhuzaimi@Karimah, Mohd Noor (2016) Resolusi anafora artikel Bahasa Melayu berasaskan pengetahuan terhad dan kelas semantik. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Noorli, Ismail and Hanita, Yusof and Mohd Faizal, Md Jaafar (2016) The Influenced of Localized Corrosion on the Natural Frequency in the Reinforced Concrete Beam. In: InCIEC 2015: Proceedings of the International Civil and Infrastructure Engineering Conference. Springer, Singapore, pp. 117-124. ISBN 978-981-10-0154-3

Noorlin, Mohd Ali and Tsuboi, Ryo and Matsumoto, Yuta and Koishi, Daisuke and Inoue, Kentaro and Maeda, Kazuhiro and Kurata, Hiroyuki (2016) Web Application for Genetic Modification Flux with Database to Estimate Metabolic Fluxes of Genetic Mutants. Journal of Bioscience and Bioengineering, 122 (1). pp. 111-116. ISSN 1389-1723. (Published)

Noorul Farina, Arifin (2016) UMP-IR: Depositor's Guide = UMP-IR: Panduan Pendeposit. UMP. (Unpublished)

Nor Aida Zuraimi, Md Noar and Greenhow, Martin (2016) Wave impact on a vertical baffle. ARPN Journal of Engineering and Applied Sciences , 11 (11). pp. 7269-7273. ISSN 18196608. (Published)

Nor Alisa, Mohd Damanhuri and Nor Aida Zuraimi, Md Noar (2016) The Numerical Integration to Solutions for the Double-slip Model for the Deformation and Flow of Granular Materials. In: Creation, Innovation, Technology & Research Exposition (CITREx) 2016 , 7-8 Mac 2016 , Universiti Malaysia Pahang. .

Nor Amiera Syahida, Arsyad and Mohammad Khairul Azhar, Abdul Razab and An’amt, Mohamed Noor and Mohd Hazim, Mohamad Amini and Nik Nurul Anis, Nik Yusoff and Zamani, A. H. and Nik Alnur Auli, Nik Yusuf and Mohamad Najmi, Masri and Muhammad Azwadi, Sulaiman and Nor Hakimin, Abdullah (2016) Effect of chemical treatment on production of activated carbon from cocos nucifera L. (Coconut) shell by microwave irradiation method. Journal of Tropical Resources and Sustainable Science, 4 (1). pp. 112-116. ISSN 2289-3946 (print), 2462-2389 (eISSN). (Published)

Nor Anis Aneza, Lokman and Hamzah, Ahmad and Mohd Razali, Daud (2016) Design and Analysis of FLC and Feedback Control for Three Finger Gripper System. In: Applied Mathematics in Science and Engineering International Conference (APPEMSE 2016) , 26-28 January 2016 , Melaka, Malaysia. pp. 1-7.. (Unpublished)

Nor Anis Aneza, Lokman and Hamzah, Ahmad and Mohd Razali, Daud (2016) Three Fingered Gripper Grasping Analysis of Different Objects using FLC. In: 3rd International Conference on Computer, Communication, and Control Technology (I4CT) , 19-21 April 2016 , Promenade Hotel Kota Kinabalu, Sabah. pp. 1-5.. (Unpublished)

Nor Ashikin, Muhamad Khairussaleh (2016) Fatigue of cable anchorages on a cable-stayed bridge. PhD thesis, The University of Surrey (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Atikah, Mat Yusoff (2016) Optimization of pre-treatments of extraction methods for quality of agarwood (Aquilaria malaccensis) essential oil. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Atiqah, Mat Refin (2016) Experimental study on the prism strength of expanded polystryene lightweight brick. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nor Atiqah, Mohd Sukri (2016) The earthquakes effect of fixed jacket platform due to surrounding earthquake in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nor Azhar, Ahmad and Rahmah, Mokhtar and Roslina, Abd. Hamid and Fauziah, Zainuddin and Emi Syakilah, Takhta (2016) Utilizing Augmented Reality Technology for Teaching Aid Tools based on Model-based Learning (AR-MB). In: Proceedings of the International University Carnival on e-Learning (IUCEL 2016) , 20-21 September 2016 , Universiti Teknologi Malaysia, Johor. pp. 135-138., 1. ISBN 978-967-0194-70-7

Nor Azlina, Alias (2016) DAA1723 Fluid Mechanics Module. Penerbit Universiti Malaysia Pahang, Kuantan, Malaysia. ISBN 978-967-0691-86-2

Nor Azlina, Alias and Lariyah, Mohd Sidek (2016) Application of 1D Shallow Flow Model for Simulation of Pollution Fate and Streamflow. In: ISFRAM 2015. Springer, Singapore, pp. 251-263. ISBN 978-981-10-0499-5 (Print); 978-981-10-0500-8 (Online)

Nor Azlina, Alias and Lariyah, Mohd Sidek (2016) An Integrated Numerical Hydrodynamic Shallow Flow-Solute Transport Model for Urban Area. IOP Conference Series: Earth and Environmental Science, 32. pp. 1-5. ISSN 1755-1315. (Published)

Nor Azliza, Jamili (2016) Effect of different type of soil in efficiency of thermal reduction in earth air heat exchanger (EAHE). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nor Azma, Laila (2016) 80 calon menang tanpa bertanding. Berita Harian . p. 28.