Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: Article | Book | Book Chapter | Bulletin | Conference or Workshop Item | Edited book | Intellectual Property (IP) | Newspaper | Research Book Profile | Research Report | Talk Series | Thesis | UMPSA News | Undergraduates Project Papers
Number of items at this level: 5491.

Article

A., Zulkiple and Norlela, Ismail and Mohd Sufian, Abdul Karim (2005) Social Impact Assessment of Transportation Projects by Benefit or Damage Cost Analysis. Journal of Transportation Science Society of Malaysia. pp. 101-109. (Published)

A., Omar and Khairunisa, Muthusamy Concrete industry, environment issue, and green concrete: A review. Construction, 2 (1). pp. 1-9. ISSN 2785-8731. (Published)

A., Taib and M. Z. A. M., Zahid and M. A. A., Rahim and Faisal, Ade and Saffuan, Wan Ahmad (2017) Selection Of Multiple Earthquakes Considering Vertical Ground Motion To Structures. International Journal of Civil Engineering and Geo-Environmental, Sp. (NCWE). pp. 10-14. ISSN 2180-2742. (Published)

A., Zulkiple and Sharifah, Awang (2012) Derivation of a Reliable and Consistent Volume Delay Functions for Town Road Network Based on Users Feedback. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 7-11. ISSN 2180-2742. (Published)

A. F., Ahmad and A. R., Razali and F. R. M., Romlay and I. S. M., Razelan (2021) Energy Harvesting on Pavement: A Review. International Journal of Renewable Energy Research, 11 (3). pp. 1250-1266. ISSN 1309-0127. (Published)

A. M., Faten Albtoush and S. I., Doh and R. A., Rahman and A. H., Al-Momani (2022) Critical success factors of construction projects in Jordan : An empirical investigation. Asian Journal of Civil Engineering, 23 (7). pp. 1087-1099. ISSN 1563-0854. (Published)

A. Malik, Hamat and M. F., Ghazali and Priyandoko, Gigih (2017) The use of transmission line modelling for detection of leakage in pipeline. Journal of Mechanical Engineering, SI 4 (4). pp. 74-83. ISSN 1823-5514. (Published)

A. Rani, Hafnidar and Abdelrahman, M. Farouk and Anandh, K. S. and Almutairi, Saud and Rahimi, A. Rahman (2022) Impact of COVID-19 on Construction Projects: The Case of India. Buildings, 12 (762). pp. 1-21. ISSN 2075-5309. (Published)

AL-japairai, Khater Ahmed Saeed and Almurisi, Samah Hamed and Syed, Mahmood and Madheswaran, Thiagarajan and Chatterjee, Bappaditya and Sri, Prasanthi and Nadiatul Azra, Ahmad Mazlan and Al Hagbani, Turki and Alheibshy, Fawaz (2023) Strategies to improve the stability of amorphous solid dispersions in view of the hot melt extrusion (HME) method. International Journal of Pharmaceutics, 647 (123536). pp. 1-13. ISSN 0378-5173. (Published)

AL-japairai, Khater Ahmed Saeed and Hamed Almurisi, Samah and Almonem Doolaanea, Abd and Syed, Mahmood and Alheibshy, Fawaz and Alobaida, Ahmed and Nadiya, Abdul-Halim and Chatterjee, Bappaditya (2023) A review on taste masked multiparticulate dosage forms for paediatric for tenacity and toughness improvement. International Journal of Pharmaceutics, 632 (122571). pp. 1-16. ISSN 0378-5173. (Published)

Aainaa Hatin, Ahmad Tarmizi and Siti Nazahiyah, Rahmat and Ahmad Tarmizi, Abd Karim and Nurul Nadrah Aqilah, Tukimat (2019) Climate change and its impact on rainfall. International Journal of Integrated Engineering, 11 (1). pp. 170-177. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Aamina, Aamina and Hossen, Md. Arif and Azrina, Abd Aziz (2023) Influence of Anodizing Parameters on the Morphological Characteristics of TNTAs. Construction, 3 (2). pp. 230-240. ISSN 2785-8731. (Published)

Ab Rahman, Tasiransurini and Nor Azlina, Ab. Aziz and Zuwairie, Ibrahim (2023) A performance of AFIRO among asynchronous iteration strategy metaheuristic algorithms. ECTI Transactions on Computer and Information Technology, 17 (3). pp. 319-329. ISSN 2286-9131. (Published)

Abbas, Ali A. and Sharifah Maszura, Syed Mohsin and Cotsovos, Demetrios M. (2014) Seismic Response of Steel Fibre Reinforced Concrete Beam-Column Joints. Engineering Structures, 59. pp. 261-283. ISSN 0141-0296. (Published)

Abbas, Ali A. and Sharifah Maszura, Syed Mohsin and Cotsovos, Demetrios M. (2016) A Simplified Finite Element Model for Assessing Steel Fibre Reinforced Concrete Structural Performance. Computers & Structures, 173. pp. 31-49. ISSN 0045-7949. (Published)

Abbas, Ali A. and Sharifah Maszura, Syed Mohsin and Cotsovos, Demetrios M. and Ruiz-Teran, Ana M. (2014) Statically-Indeterminate SFRC Columns under Cyclic Loads. Advances in Structural Engineering, 17 (10). pp. 1403-1418. ISSN 1369-4332. (Published)

Abd El-Hakim, Abou El fettouh Abd El Moneim and Haroun, Ahmed Abd Allah and Rabie, Abdel Gawad Mohamed and Ali, Gomaa A. M. and Abdelrahim, Mohamed Yahia Marei (2019) Improving the mechanical and thermal properties of chlorinated poly(vinyl chloride) by incorporating modified CaCO3 nanoparticles as a filler. Turkish Journal of Chemistry, 43 (3). pp. 750-759. ISSN 1300-0527. (Published)

Abdalla, Ahmed N. and Jing, Wang and Nazir, Muhammad Shahzad and Jiang, Mingxing Xin and Tao, Hao (2022) Socio-economic impacts of solar energy technologies for sustainable green energy: A review. Environment, Development and Sustainability, Ahead of print. pp. 1-38. ISSN 1387-585X. (Published)

Abdalrhman Alhaj, Nura and Mohd Faizal, Jamlos and Sulastri, Abdul Manap and Abdelsalam, Samah and Ahmed Bakhit, Abdelmoneim and Rizalman, Mamat and Mohd Aminudin, Jamlos and Mohammed Gismalla, Mohammed Salih and Hamdan, Mosab (2023) Integration of hybrid networks, AI, Ultra Massive-MIMO, THz frequency, and FBMC modulation toward 6g requirements : A Review. IEEE Access, 12. pp. 483-513. ISSN 2169-3536. (Published)

Abdel-Raheem, Ashraf and Dulaimi, Anmar and S. Mohamed, Ahmed and S. Moussa, Ghada and Özkılıç, Yasin Onuralp and Mashaan, Nuha and Putra Jaya, Ramadhansyah and Abdel-Wahed, Talaat (2023) Investigating the Potential of High-Density Polyethylene and Nano Clay Asphalt-Modified Binders to Enhance the Rutting Resistance of Asphalt Mixture. Sustainability (Switzerland), 15 (8). pp. 1-19. ISSN 2071-1050. (Published)

Abdoullah, Namdar and Fadzil, Mat Yahaya (2014) The Effect of Nanoparticles of Ordinary Portland Cement (OPC) on Compressive Strength of Concrete. Advanced Materials Research, 894. pp. 342-348. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Abdoullah, Namdar and Fadzil, Mat Yahaya and Chua, Pei Shan and Nabila Shahilla, Rajagopal (2014) Effect of Seashell Powder on Flexural and Compressive Strength of Cement Mortar in Early Age. Advanced Materials Research, 894. pp. 65-69. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Abdoullah, Namdar and Fadzil, Mat Yahaya and Kok, Jun Jie and Lim, Yeng Ping (2014) An Investigation on Effect of Oil Palm Shell Ash on Flexural Strength and Compressive Strength of Cement Mortar. Advanced Materials Research, 894. pp. 55-59. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Abdoullah, Namdar and Fadzil, Mat Yahaya and M. M., Yusoff (2014) Using High Temperature for Improve Compressive Strength of Ordinary Portland Cement Paste (OPC) – A New Approach. Advanced Materials Research, 894. pp. 70-76. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Abdul, Wahab and Muzamir, Hasan and Faradiella, Mohd Kusin and Zaidi, Embong and Uz Zaman, Qamar and Zaheer Uddin, Babar and Muhammad Syamsul Imran, Zaini (2022) Physical properties of undisturbed tropical peat soil at Pekan District, Pahang, West Malaysia. International Journal of Integrated Engineering, 14 (4). pp. 403-414. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Abdul, Wahab and Muzamir, Hasan and Kusin, F. M. and Rehman, R. U. and Din, Z. U. and Zaman, Q. U. (2022) The electrokinetic impact on heavy metals remediation of Tasik Chini iron ore mine tailings at Pahang State, Peninsular Malaysia. Journal of Engineering and Technology (JET), 14 (1). pp. 75-90. ISSN 2180-3811. (Published)

Abdul, Wahab and Zaidi, Embong and Muzamir, Hasan and Musa, Habib and Uz Zaman, Qamar and Ullah, Hidyat (2020) Peat soil engineering and mechanical properties improvement under the effect of EKS technique at Parit Kuari, Batu Pahat, Johor, West Malaysia. Bulletin of the Geological Society of Malaysia, 70. pp. 133-138. ISSN 0126-6187. (Published)

Abdul Halim, Abdul Razik and Roziah, Zailan and Elkamel, Marwen and Elkamel, Ali (2022) Multi-product productions from malaysian oil palm Empty Fruit Bunch (EFB) : Selection for optimal process and transportation mode. Resources, 11 (67). pp. 1-31. ISSN 2079-9276. (Published)

Abdul Rahimi, Abdul Rahman and Ayer, Steven K. (2019) Enhancing the non-technological skills required for effective building information modeling through problem-based learning. Journal of Information Technology in Construction, 24. pp. 154-166. ISSN 1874-4753. (Published)

Abdul Rahimi, Abdul Rahman and Ayer, Steven K. and London, Jeremi S. (2019) Applying problem-based learning in a building information modeling course. International Journal of Engineering Education, 35 (3). pp. 956-967. ISSN 0949-149X. (Published)

Abdul Rahman, Ahmad Fikri Hadi and Ahmad Khushairi, Zulsyazwan and Abu Seman, M. N. and Mohamed, Khayet (2021) Optimization of UV-photografting factors in preparation of polyacrylic-polyethersulfone forward osmosis membrane using response surface methodology. Korean Journal of Chemical Engineering, 38 (11). pp. 2313-2323. ISSN 0256-1115 (Print); 1975-7220 (Online). (Published)

Abdul Syukor, Abd Razak and Norbaizurah, Rahman and Nur Azzimah, Zamri and Suryati, Sulaiman and Noor Asyikin Aisyah, Burhanudin and Hasmanie, Abdul Halim and Edriyana, Abd Aziz (2015) COD, BOD and Heavy Metal Removal from Ground Water Treatment by using WASRA System: A Case Study on Universiti Malaysia Pahang Mosque. Advances in Environmental Biology, 9 (1). pp. 26-29. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Abdul Syukor, Abd Razak and Nur Azzimah, Zamri and Norbaizurah, Rahman and Suryati, Sulaiman and Nurhidayah, Mahazam and Hasmanie, Abdul Halim and Edriyana, Abd Aziz (2015) Removal of Physical Properties in Water Supply by WASRA for Sustainable Irrigation System. Advances in Environmental Biology, 9 (1). pp. 30-34. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Abdul Syukor, Abd Razak and Suryati, Sulaiman and Siddique, Md. Nurul Islam and Zularisam, A. W. and M. I. M., Said (2016) Integration of Phytogreen for Heavy Metal Removal from Wastewater. Journal of Cleaner Production, 112 (Prt. 4). pp. 3124-3131. ISSN 0959-6526 (print); 1879-1786 (online). (Published)

Abdul Syukor, Abd Razak and Zularisam, A. W. and Ideris, Zakaria and Mohd. Ismid, Mohd. Said and Suryati, Sulaiman and Hasmanie, Abdul Halim and Diana Laura, Thomas (2013) Potential of Aquatic Plant as Phytoremediator for Treatment of Petrochemical Wastewater in Gebeng Area, Kuantan. Advances in Environmental Biology, 7 (12). pp. 3808-3814. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Abdul-Rahman, Mazin and Al-Attar, Alyaa and Hamada, Hussein M. and Tayeh, Bassam (2020) Microstructure and structural analysis of polypropylene fibre reinforced reactive powder concrete beams exposed to elevated temperature. Journal of Building Engineering, 29 (101167). pp. 1-8. ISSN 2352-7102. (Published)

Abdulkarim Abdulrahman, Mohamed Suliman and Ruzinah Isha, Isha and Mazrul Nizam, Abu Seman and Abdul Latif, Ahmad (2020) Synthesis and characterization of TiO2 and palm oil fiber ash hybrid photocatalysts for water pretreatment. Maejo International Journal of Energy and Environmental Communication, 2 (3). pp. 1-10. ISSN 2673-0537. (Published)

Abdulla, Firdos M. and Shnain, Zainab Yousif and Alwasiti, Asawer A. and Abid, Mohammad Fadhil and Azhari, Nour Hamid Abduelraman (2024) Photocatalysis technology for treating petroleum wastewater andthe potential application of tapered bubble column (TBC) : A review. Global Nest Journal, 26 (05681). pp. 1-16. ISSN 1790-7632. (Published)

Abdullah, Ali D. and Gisen, J. I. A. and Pieter, van der Zaag and Hubert H. G., Savenije and Usama F. A., Karim and Ilyas, Masih and Ioana, Popescu (2016) Predicting the Salt Water Intrusion in the Shatt al-Arab Estuary using an Analytical Approach. Hydrology and Earth System Sciences, 20 (10). pp. 4031-4042. ISSN 1027-5606. (Published)

Abdullah Omar Abdullah, Baqadeem and Khairil Azman, Masri (2023) Fibers in asphalt mixture : A state-of-the-art review. Construction, 3 (1). pp. 115-122. ISSN 2785-8731. (Published)

Abdullah Zawawi, Munzir and Abdul Hassan, Norhidayah and Mahmud, Mohd Zul Hanif and Putra Jaya, Ramadhansyah and Mohamed, Azman (2023) Effect of Evotherm 3G on the performance of asphalt mixture. Physics and Chemistry of the Earth, Parts A/B/C, 130 (103392). pp. 1-4. ISSN 1474-7065. (In Press / Online First) (In Press / Online First)

Abdulmalek, Suliman and Abdul Nasir, Abd Ghafar and Jabbar, Waheb A. (2024) LoRaWAN-based hybrid internet of wearable things system implementation for smart healthcare. Internet of Things (Netherlands), 25 (101124). pp. 1-21. ISSN 2542-6605. (Published)

Abed, Munther Hameed and Mohd Nizam Mohmad, Kahar (2022) Guided genetic algorithm for solving unrelated parallel machine scheduling problem with additional resources. Indonesian Journal of Electrical Engineering and Computer Science, 26 (2). pp. 1036-1049. ISSN 2502-4752. (Published)

Abed, S. A. and Aljanabi, M. and Ameer, N. H. A. and Ismail, M. A. and Kasim, S. and Hassan, R. and Sutikno, T. (2021) Application of the Jaya algorithm to solve the optimal reliability allocation for reduction oxygen supply system of a spacecraft. Indonesian Journal of Electrical Engineering and Computer Science, 24 (2). pp. 1202-1211. ISSN 2502-4752. (Published)

Abesh Ahmadlou, Leila and Najafi, Gholamhassan and Loni, Reyhaneh and Kasaeian, Alibakhsh Bakhash and Rizalman, Mamat and Mohd Fairusham, Ghazali and Arman, Abdullah and Ei-Shafy, A. S. and Mousa, Mohamed (2023) Experimental investigation of PV/T and thermoelectric systems using CNT/ water nanofluids. Applied Thermal Engineering, 227 (120350). pp. 1-14. ISSN 1359-4311. (Published)

Abolghasem, Akbari and Leila, Sedaei and Mehdi, Naderi and Azizan, Abu Samah and Nazila, Sedaei (2015) The Application of the Water Erosion Prediction Project (WEPP) Model for the Estimation of Runoff and Sediment on a Monthly Time Resolution. Environmental Earth Sciences, 74 (7). pp. 5827-5837. ISSN 1866-6299. (Published)

Abrahart, Robert J. and Mount, Nick J. and Ngahzaifa, Ab. Ghani and Clifford, Nicholas J. and Dawson, Christian W. (2011) DAMP: A protocol for contextualising goodness-of-fit statistics in sediment-discharge data-driven modelling. Journal of Hydrology, 409 (3-4). pp. 596-611. ISSN 0022-1694. (Published)

Abu Jafar, Md Muzahid and Syafiq Fauzi, Kamarulzaman and Rahman, Md Arafatur and Murad, Saydul Akbar and Kamal, Md Abdus Samad and Alenezi, Ali H. (2023) Multiple vehicle cooperation and collision avoidance in automated vehicles : Survey and an AI‑enabled conceptual framework. Scientific Reports, 13 (603). pp. 1-27. ISSN 2045-2322. (Published)

Abubakar Abdulkadir, Bashir Abubakar and Ros Shazuin Rayyanu, Mohd Zaki and Ahmad Tarmizi, Abd Wahab and Siti Nurqurratulainie, Miskan and Nguyen, Anh Tam and Vo, Dai Viet N. and Herma Dina, Setiabudi (2024) A concise review on surface and structural modification of porous zeolite scaffold for enhanced hydrogen storage. Chinese Journal of Chemical Engineering, 70. pp. 33-53. ISSN 1004-9541. (Published)

Achmad Fauzi, Abdul Wahab and Fauzi, Usama Juniansyah and Wan Mohd Nazmi, Wan Abdul Rahman (2013) Engineering Quality Improvement Of Kuantan Clay Subgrade Using Recycling And Reused Materials as Stabilizer. Procedia Engineering, 54. pp. 675-708. ISSN 1877-7058. (Published)

Achmad Fauzi, Abdul Wahab and Irsyam, Masyhur and Fauzi, Usama Juniansyah (2014) Empirical Correlation of Shear Wave Velocity And N-Spt Value for Jakarta. International Journal of GEOMATE, 7 (1). pp. 980-984. ISSN 2186-2982 (print); 2186-2990(online). (Published)

Achmad Fauzi, Abdul Wahab and Wan Mohd Nazmi, Wan Abdul Rahman and Usama Juniansyah, Fauzi (2011) Kuantan Clay Properties and Examination of Fly Ash and Bottom Ash Utilization as Soil Stabilizer. International Journal of Civil Engineering and Geo-Environmental, 2. pp. 27-31. ISSN 2180-2742. (Published)

Achmad Fauzi, Abdul Wahab and Zuraidah, Fauzi and Usama Juniansyah, Fauzi (2013) Evaluation of CBR Increase on Stabilized Kuantan Clay by Using Waste Glass, HDPE and Carpet Fiber. International Journal of Civil Engineering and Geo-Environmental, 4. pp. 9-13. ISSN 2180-2742. (Published)

Adam Ismail Hammad, Khalid and Mohamed Abdelaziz, Izzeldin Ibrahim and Younis, Younis M. (2021) The impact of the soft errors in convolutional neural network on GPUS: Alexnet as case study. Procedia Computer Science, 182. pp. 89-94. ISSN 1877-0509. (Published)

Adarsh Kumar, Pandey and Reji, Kumar. R and M., Samykano (2021) Solar energy: direct and indirect methods to harvest usable energy. Dye-Sensitized Solar Cells Emerging Trends and Advanced Applications. pp. 1-24. ISSN 978-0-12-818206-2. (Published)

Addepalli, Phanindra and Sawangsri, Worapong and Saiful Anwar, Che Ghani (2024) A scientometric analysis of bone cutting tools & methodologies : Mapping the research landscape. Injury, 55 (111458). pp. 1-12. ISSN 0020-1383. (Published)

Adeleke, A. Q. and Adeniyi, A. W. and Muuka, G. N. (2021) The influence of delay factors on Pahang Malaysian construction industry: A PLS-SEM approach. International Journal of Industrial Management (IJIM), 11 (1). 206 -216. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Adeleke, A. Q. and Mohd Nasrun, Mohd Nawi and Saipol Bari, Abd-Karim (2020) Where are we? the level of risk management in Malaysian construction industries. International Journal of Supply Chain Management (IJSCM), 9 (1). 527 -535. ISSN 2050-7399 (Online). (Published)

Adhikary, Apurba and Bhuiya, Joy and Murad, Saydul Akbar and Hossain, Md. Bipul and Aslam Uddin, K. M. and Faysal, MD Estihad and Rahaman, Abidur and Bairagi, Anupam Kumar (2022) Performance evaluation of micro lens arrays: Improvement of light intensity and efficiency of white organic light emitting diodes. PLoS ONE, 17 (5). pp. 1-28. ISSN 1932-6203. (Published)

Adhreena, M S N A and Z. M., Hafizi and Vorathin, E. and N., Zahir (2023) A Study Of Fiber Bragg Grating Temperature Sensor For Under Water Temperature Monitoring. Journal of Engineering and Technology (JET), 14 (1). pp. 237-244. ISSN 2180-3811. (Published)

Adil, M. Osman and Nour, Abdurahman Hamid and Noormazlinah, Ahmad (2023) A review study on the potential of microalgae biomass producing biopolymer material. Current Science and Technology (CST), 2 (2). pp. 49-55. ISSN 2785-8804. (Published)

Adiza, Jamadin and Zainah, Ibrahim and Mohd Zamin, Jumaat and Ezahtul Shahreen, Ab Wahab (2019) Effect of high-cyclic loads on dynamic response of reinforced concrete slabs. KSCE Journal of Civil Engineering, 23 (3). pp. 1293-1301. ISSN 1226-7988 (Print); 1976-3808 (Online). (Published)

Afiqah, R. Radzi and Hashim, R. Bokhari and Abdul Rahimi, Abdul Rahman and K. Ayer, Steven (2019) Key Attributes of Change Agents for Successful Technology Adoptions in Construction Companies: A Thematic Analysis. ASCE International Conference on Computing in Civil Engineering 2019. pp. 430-437. (Published)

Afiqah, R. Radzi and M. Farouk, Abdelrahman and Noor Suraya, Romali and Farouk, Mohamed and Elgamal, Mohamed and Rahimi, A. Rahman (2024) Assessing Environmental Management Plan Implementation in Water Supply Construction Projects: Key Performance Indicators. Sustainability, 16 (2). pp. 1-21. ISSN 2071-1050. (Published)

Afiqah R., Radzi and Abdul Rahimi, Abdul Rahman and Ahmad Rizal, Alias and Almutairi, Saud Jaza (2023) Validating the impact of psychological, physical and social factors on workplace well-being at construction sites. International Journal of Integrated Engineering, 15 (2). pp. 245-255. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Afiqah R., Radzi and Abdul Rahimi, Abdul Rahman and Almutairi, Saud (2022) Modeling COVID-19 impacts and response strategies in the construction industry: PLS–SEM approach. International Journal of Environmental Research and Public Health, 19 (9). pp. 1-25. ISSN 1661-7827. (Published)

Afiqah R., Radzi and Anandh, K. S. and Ahmad Rizal, Alias and Algahtany, Mohammed and Abdul Rahimi, Abdul Rahman (2024) Modeling the factors affecting workplace well-being at construction sites : A cross-regional multigroup analysis. Journal of Engineering, Design and Technology. pp. 1-24. ISSN 1726-0531. (In Press / Online First) (In Press / Online First)

Afiqah R., Radzi and Nur Farhana, Azmi and Syahrul Nizam, Kamaruzzaman and Abdul Rahimi, Abdul Rahman and Papadonikolaki, Eleni (2023) Relationship between digital twin and building information modeling : A systematic review and future directions. Construction Innovation, ahead-of-print. pp. 1-19. ISSN 1471-4175. (In Press / Online First) (In Press / Online First)

Afnan Azzahra, Ahmad Kamal and Suhaimi, Mohamad and Mardawani, Mohamad and Rizki, Wannahari and Ahmad Ziad, Sulaiman and Azilah, Ajit and Lim, Jun-Wei and Nurul Akmar, Che Zaudin (2021) Extraction of gallic acid from chromolaena sp. using ultrasound-assisted extraction. Engineering Journal, 25 (2). pp. 269-276. ISSN 0125-8281. (Published)

Aghasiloo, Peyman and Yousefzadeh, Maryam and Latifi, Masoud and Rajan, Jose (2019) Highly porous TiO2 nanofibers by humid-electrospinning with enhanced photocatalytic properties. Journal of Alloys and Compounds, 790. pp. 257-265. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Agi, Augustine and Oseh, Jeffrey O. and Gbadamosi, Afeez and Fung, Cheo Kiew and Junin, Radzuan and Jaafar, Mohd Zaidi (2023) Performance evaluation of nanosilica derived from agro-waste as lost circulation agent in water-based mud. Petroleum Research, 8 (2). pp. 256-269. ISSN 2096-2495. (Published)

Agi, Augustine Aja and Mohd Zaidi, Jaafar and Zulkifli, Abdul Majid and Nor Aishah, Saidina Amin and Mohd Akhmal, Sidek and Yakasai, Faruk and Muhammad Abbas, Ahmad Zaini and Azrul Nurfaiz, Mohd Faizal and Gbadamosi, Afeez and Sirajo, Lawal and Oseh, Jeffrey Onuoma and Norida, Ridzuan and Ngouangna, Eugene N. (2023) Dynamic modelling of reservoir fines retention by mesoporous silica nanofluid to improve oil recovery during low salinity water flooding of a consolidated sandstone. Geoenergy Science and Engineering, 231 Part A (212328). ISSN 2949-8910. (Published)

Ahamed, Nizam Uddin and Ahmed, Nasim and Alqahtani, Mahdi and Altwijri, Omar and Ahmad, Badlishah and Sundaraj, Kenneth (2015) Investigation of the EMG-Time Relationship of the Biceps Brachii Muscle During Contractions. Journal of Physical Therapy Science, 27 (1). pp. 39-40. ISSN 0915-5287. (Published)

Ahamed, Nizam Uddin and Alqahtani, Mahdi and Rahman, Matiur (2016) Age-related EMG responses of the biceps brachii muscle of young adults. Biomedical Research (India), 27 (3). pp. 787-793. ISSN 0970-938X. (Published)

Ahamed, Nizam Uddin and Sundaraj, K and Alqahtani, Mahdi and Altwijri, Omar and Ali, A and Islam, A (2014) EMG-force relationship during static contraction: Effects on sensor placement locations on biceps brachii muscle. Technology and Health Care, 22 (4). pp. 505-513. ISSN 0928-7329. (Published)

Ahmad, Anwar and Ghufran, Rumana and Nasir, Qazi and Shahitha, Fathima and Al-Sibani, Mohammed and Al-Rahbi, Amal (2023) Enhanced anaerobic co-digestion of food waste and solid poultry slaughterhouse waste using fixed bed digester : Performance and energy recovery. Environmental Technology and Innovation, 30 (103099). pp. 1-15. ISSN 2352-1864. (Published)

Ahmad, Awais and Akbari, Abolghasem and Iqbal, Javed (2015) GIS-Based Identification Of Overloaded Distribution Transformers & Calculation Of Technical Electric Power Losses. International Journal of Civil Engineering and Geo-Environmental, 6 (1). pp. 14-21. ISSN 2180-2742. (Published)

Ahmad Ashraf, Abdul Halim and Andrew, Allan Melvin and Wan Azani, Mustafa and Mohd Najib, Mohd Yasin and Muzammil R.I., Mat Jusoh and Veeraperumal, Vijayasarveswari and Mohd Amiruddin, Abd Rahman and Norshuhani, Zamin and Mary, Mervin Retnadhas and Khatun, Sabira (2022) Optimized intelligent classifier for early breast cancer detection using ultra-wide band transceiver. Diagnostics, 12 (2870). pp. 1-19. ISSN 2075-4418. (Published)

Ahmad Ashraf, Abdul Halim and Veeraperumal, Vijayasarveswari and Andrew, Allan Melvin and Mohd Najib, Mohd Yasin and Mohd Zamri Zahir, Ahmad and Hossain, Kabir and Bari, Bifta Sama and Fatinnabila, Kamal (2023) UWB-based early breast cancer existence prediction using artificial intelligence for large data set. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 81-90. ISSN 2462-1943. (Published)

Ahmad Azwan, Abdul Razak and Ahmad Nor Kasruddin, Nasir and Nor Maniha, Abd Ghani (2022) Super-opposition spiral dynamic-based fuzzy control for an inverted pendulum system. Bulletin of Electrical Engineering and Informatics, 11 (5). pp. 2737-2745. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Ahmad Azwan, Abdul Razak and Ahmad Nor Kasruddin, Nasir and Nor Maniha, Abdul Ghani and Mohammad Osman, Tokhi (2024) Opposition-based manta ray foraging algorithm for global optimization and its application to optimize nonlinear type-2 fuzzy logic control. Journal of Low Frequency Noise Vibration and Active Control. pp. 1-24. ISSN 1461-3484. (Published)

Ahmad Fadzil, Sharol and Amir, Abdul Razak and Zafri Azran, Abdul Majid and Ahmad, Fudholi (2019) Experimental study on performance of square tube absorber with phase change material. International Journal of Energy Research, 44 (2). pp. 1000-1011. ISSN 0363-907X (print); 1099-114X (online). (Published)

Ahmad Fadzil, Sharol and Amir, Abdul Razak and Zafri Azran, Abdul Majid and Muhammad Amirul Azwan, Azmi and Muhammad Amir Syahiran, Muhammad Tarminzi (2020) Evaluation on the Performance of Cross-Matrix Absorber Double-Pass Solar Air Heater (CMA-DPSAH) with and without Thermal Energy Storage Material. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (2). pp. 37-49. ISSN 2289-7879. (Published)

Ahmad Fitri, Yusop and Mohd Hafizil, Mat Yasin and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz (2013) PM Emission of Diesel Engines Using Ester-Ethanol-Diesel Blended Fuel. Procedia Engineering, 53. pp. 530-535. ISSN 1877-7058. (Published)

Ahmad Huzaimi, Abd Jamil and Mohamad Syazli, Fathi and Lee, Chia Kuang (2023) Validation of model content through a building information modelling-based contract administration. Global Business and Management Research: An International Journal, 15 (2s). pp. 196-209. ISSN 1947-5667. (Published)

Ahmad Noor Syukri, Zainal Abidin and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and Azzuhana, Roslan and Roziana, Shahril and Zulhaidi, Mohd Jawi and Khairil Anwar, Abu Kassim (2021) Potential application of Artificial Neural Network (ANN) analysis method on Malaysian road crash data. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (2). pp. 95-105. ISSN 2636-9575. (Published)

Ahmad Nor Kasruddin, Nasir and Raja Mohd Taufika, Raja Ismail and Tokhi, M. O. (2016) Adaptive Spiral Dynamics Metaheuristic Algorithm for Global Optimisation with Application to Modelling of a Flexible System. Applied Mathematical Modelling, 40 (9-10). pp. 5442-5461. ISSN 0307-904X. (Published)

Ahmad Rasdan, Ismail and Che Mohammad Nizam, Che Kamaruddin and Mohd Hanifiah, Mohd Haniff and Baba, Md Deros (2014) The Impact of Workers Productivity Under Simulated Environmental Factor by Taguchi Analysis. APCBEE Procedia, 10. pp. 263-268. ISSN 2212-6708. (Published)

Ahmad Ridzuan, Abu Bakar and Ahmad Tarmizi, Haron and Rahimi, A. Rahman (2020) Building Information Modelling Execution Plan (BEP): A comparison of global practice. International Journal of Engineering Technology And Sciences (IJETS), 7 (2). pp. 1-11. ISSN 2289-697X. (Published)

Ahmad Salam, Farooqi and Siti Nur Fatihah, Adnan and Setiabudi, Herma Dina and Syed Anuar Faua’ad d, Sye Muhammad and Shahrul, Ismail and Aslam, Sameen and Bawadi, Abdullah (2023) Syngas production via bi-reforming of methane over fibrous KCC-1 stabilized ni catalyst. Topics in Catalysis, 66 (1-4). pp. 235-246. ISSN 1022-5528. (Published)

Ahmad Shukri, Mohd Noor and Auni, Che Fauzi and Ainul Azila, Che Fauzi and Noraziah, Ahmad and Mohamad Syauqi, Arifin (2022) An automate failure recovery for synchronous distributed database system. Indonesian Journal of Electrical Engineering and Computer Science, 28 (2). pp. 973-979. ISSN 2502-4752. (Published)

Ahmad Syafadhli, Abu Bakar and Ku Muhammad Naim, Ku Khalif and Asma, Ahmad Shariff and Gegov, Alexander and Fauzani, Md Salleh (2020) Fuzzy risk analysis under influence of non-homogeneous preferences elicitation in fiber industry. Applied Intelligence, 50 (1). pp. 157-168. ISSN 0924-669X. (Published)

Ahmad Syafiq, Deraman and Mohd Rusllim, Mohamed and Wan Ismail, Ibrahim and Leung, Puiki (2023) Flexible horizontal piezoelectric energy generator for sea wave applications. e-Prime - Advances in Electrical Engineering, Electronics and Energy, 4 (100151). pp. 1-13. ISSN 2772-6711. (Published)

Ahmad Tarmizi, Haron and A., Marshall-Ponting and Mohd Nasrun, Mohd Nawi and Mohd Harris, Ismail (2014) Building information modelling: A case study approach to identify readiness criteria for process requirement. American-Eurasian Journal of Sustainable Agriculture, 8 (7S2). pp. 85-91. ISSN 1995-0748. (Published)

Ahmad Yunus, Nasution and Mohd Ruzaimi, Mat Rejab and Siregar, J. P. and Ma, Quanjin (2023) Combination of frustra shapes with cross sections and trigger circles for crash box design to absorb energy. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Ahmad Ziad, Sulaiman and Azilah, Ajit and R. M., Yunus and Chisti, Yusuf (2011) Ultrasound-assisted fermentation enhances bioethanol productivity. Biochemical Engineering Journal. pp. 141-150. (Published)

Ahmed, Mokhtar Albshir Budiea and Mohd Warid, Hussin and Khairunisa, Muthusamy and Mohamed, Ismail El Gelany (2010) Performance of High Strength POFA Concrete in Acidic Environment. Concrete Research Letters, 1 (1). pp. 14-18. ISSN 2180-1371. (Published)

Ahmed Mokhtar Albshir, Budiea and Nordin, Yahaya and Khairunisa, Muthusamy and Shahrulniza, Mokhatar (2021) Corrosion of steel under simulated condition of offshore seabed sediment. Malaysian Construction Research Journal, SpecialIssue 13 (Issue SUPPL.2). p. 94. ISSN 1985-3807. (Published)

Ahmi, Nur Nadia and Mohd Zainudin, Nurhaizan and Lee, Chia Kuang (2023) Effectiveness of CIPAA Implementation in Construction Industry from the Perspective of Contractors in Malaysia. Global Business and Management Research: An International Journal, 15 (2s). pp. 73-86. ISSN 1947-5667. (Published)

Ahmmad Shukrie, Md Yudin and Oumer, A. N. and N. F. M., Roslan and Mohd Azlan, Zulkarnain (2020) Computational and experimental study on pressure drop in a fluidised bed with different air distributor designs. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 8043 -8051. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Aikhuele, Daniel O. and Odofin, S. M. (2017) A generalized triangular intuitionistic fuzzy geometric averaging operator for decision-making in engineering and management. Information (Switzerland), 8 (3). ISSN 2078-2489. (Published)

Ain Nadhira, Mohd Taib and Fauziah, Zainuddin and Rahmah, Mokhtar and Kamalia Azma, Kamaruddin and Nadzirah, Ahmad Basri (2024) A systematic literature review of an advisory system. International Journal of Computing and Digital Systems, 15 (1). pp. 855-864. ISSN 2210-142X. (Published)

Ainaa Mardhiah, Sabri and Norfazillah, Talib and Nur Syazwani Filzah, Mohd Saad and Amiril Sahab, Abdul Sani and Kunar, Sandip and Said, Ahmad and Haslina, Abdullah and Woon Kiow, Lee and Aslinda, Salleh (2023) Physical properties of new formulation of hybrid nanofluid-based Minimum Quantity Lubrication (MQL) from modified jatropha oil as metalworking fluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences (1). pp. 1-10. ISSN 2289-7879. (Unpublished) (Unpublished)

Aishah, Abu Bakar and Nur Afifah Fatinnisa', Rizal Imran (2023) Standard penetration test in Malaysia: Safety issues and improvement opportunities. Construction, 3 (2). 263 -274. ISSN 2785-8731. (Published)

Aizat, Alias and Amin, A. F. M. (2021) Blast loaded steel-concrete composite slab. Journal of Mechanical Engineering and Sciences (JMES), 15 (1). 7874 -7884. ISSN 2231-8380 (online). (Published)

Aizat, Alias and Mohammad Amirulkhairi, Zubir and Khairul Anuar, Shahid and Ahmad Baharuddin, Abdul Rahman (2013) Structural Performance of Grouted Sleeve Connectors with and without Transverse Reinforcement for Precast Concrete Structure. Procedia Engineering, 53. pp. 116-123. ISSN 1877-7058. (Published)

Aizat, Mohd Taib and Ming, Fei Law and Reza Pahlevi, Munirwan and Mohd Firdaus, Md Dan and Putra Jaya, Ramadhansyah (2024) The stability of natural and man‑made unsaturated slopes influenced by different rainfall patterns. Environmental Science and Pollution Research. pp. 1-19. ISSN 1614-7499. (In Press / Online First) (In Press / Online First)

Ajibike, W. A. and Adeleke, A. Q. and Fazeeda, Mohamad and M. N. M., Nawi and Bamgbaded, J. A. and S. R. M., Riazi and Md Fauzi, Ahmad (2020) Achieving environmental sustainability in Malaysian construction industry through institutional pressure. Journal of Critical Reviews, 7 (7). pp. 1159-1167. ISSN 2394-5125. (Published)

Ajibike, W. A. and Adeleke, A. Q. and Fazeeda, Mohamad and M. N.M., Nawi and T.D., Moshood (2020) Examining technology orientation constructs: A validation study. Productivity Management, 25 (5). pp. 1069-1080. ISSN 1868-8519. (Published)

Akbari, Abolghasem and Azimi, Rehayne and Noram Irwan, Ramli (2014) Influence of Slope Aspects and Depth on Soil Properties in a Cultivated Ecosystem. The Electronic Journal of Geotechnical Engineering (EJGE), 19. pp. 8601-8608. ISSN 1089-3032. (Published)

Akbari, Abolghasem and Azizan, Abu Samah and Daryabor, Farshid (2016) Raster-Based Derivation of a Flood Runoff Susceptibility Map using the Revised Runoff Curve Number (CN) for the Kuantan Watershed, Malaysia. Environmental Earth Sciences, 75 (137). pp. 1-8. ISSN 1866-6299. (Published)

Akbari, Abolghasem and Daryabor, Farshid and Azizan, Abu Samah and Fanodi, Mohsen (2017) Validation of TRMM 3B42 V6 for estimation of mean annual rainfall over ungauged area in semiarid climate. Environmental Earth Sciences, 76 (15). pp. 1-2. ISSN 1866-6299. (Published)

Akbari, Abolghasem and Mozafari, Golamali and Fanodi, Mohsen and Sadat Hemmesy, Maliheh (2014) Impact of Landuse Change on River Floodplain Using Public Domain Hydraulic Model. Modern Applied Science, 8 (5). pp. 80-86. ISSN 1913-1844 (printed), 1913-1852 (online). (Published)

Akbari, Abolghasem and Noram Irwan, Ramli and Ngien, S. K. and Reyhane, Azimi (2016) Application of Public Domain Satellite-Based DEMs in Natural Hazard Modeling. International Journal of Environmental Science and Development, 7 (2). pp. 140-144. ISSN 2010-0264. (Published)

Akbari, Abolghasem and Noram Irwan, Ramli and Ngien, S. K. and Reyhane, Azimi (2014) Application of Public Domain Satellite-based DEMs in Geohazard Modeling. APCBEE Procedia (6). (Published)

Akbari, Abolghasem and Sedaei, Leila and Mehdi, Naderi and Azizan, Abu Samah and Sedaei, Nazila (2015) The Application of the Water Erosion Prediction Project (WEPP) Model for the Estimation of Runoff and Sediment on a Monthly Time Resolution. Environmental Earth Sciences, 74 (7). pp. 5827-5837. ISSN 1866-6299. (Published)

Akbari, Abolghasem and Sedaei, Nazila and Sedaei, Leila and Cox, Jonathan Peter (2015) Customization of the OSSEM Model for Application to Annual Data from the Talar Aquifer, Northern Iran. Water Science & Technology: Water Supply, 15 (3). pp. 656-666. ISSN 1606-9749. (Published)

Akbari, Sweeta and Nour, Abdurahman Hamid (2018) Emulsion types, stability mechanisms and rheology: A review. International Journal of Innovative Research and Scientific Studies, 1 (1). pp. 11-17. ISSN 2617-6548. (Published)

Akbari, Sweeta and Nour, Abdurahman Hamid (2018) Stabilization of crude oil emulsions using different surfactants. International Journal of Innovative Research and Scientific Studies, 1 (1). pp. 23-26. ISSN 2617-6548. (Published)

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and Heim, Hans P. and Feldmann, Maik and Mariatti, M. (2019) Oxidative induction and performance of oil palm fiber reinforced polypropylene composites - effects of coupling agent and UV stabilizer. Composites Part A: Applied Science and Manufacturing, 125 (105577). ISSN 1359-835X. (Published)

Akm Asif, Iqbal and Norfatihah, Ismail (2022) Mechanical properties and corrosion behavior of silica nanoparticle reinforced magnesium nanocomposite for bio-implant application. Materials, 15 (8164). pp. 1-11. ISSN 1996-1944. (Published)

Al Alyani, Wafa Rashid and Lee, Chia Kuang (2024) Determinants of Total Quality Management and Institutional Pressure towards Project Performance: A Review of Literature. International Journal of Academic Research in Business and Social Sciences (IJARBSS), 14 (2). pp. 38-48. ISSN 2222-6990. (Published)

Al Alyani, Wafa Rashid and Lee, Chia Kuang (2024) Investigating factors affecting project performance moderated by project governance. Problems and Perspectives in Management, 22 (1). pp. 268-278. ISSN 1810-5467. (Published)

Al Biajawi, Mohammad I. and Rahimah, Embong (2023) Influence of setting time and compressive strength for coal bottom ash as partial cement replacement in mortar. Maejo International Journal of Energy and Environmental Communication, 5 (3). pp. 1-5. ISSN 2673-0537. (Published)

Al Biajawi, Mohammad I. and Rahimah, Embong and Khairunisa, Muthusamy and Jabar, Haneen Abdel and Hilal, Nahla and Fadzli, Mohamed Nazri (2024) On the post-heat behavior of cement mortar containing mechanically modified ground coal bottom ash. Salud, Ciencia y Tecnologia - Serie de Conferencias, 3 (813). pp. 1-14. ISSN 2953-4860. (Published)

Al Biajawi, Mohammad I. and Rahimah, Embong and Khairunisa, Muthusamy and Norasyikin, Ismail and Obianyo, Ifeyinwa I. (2022) Recycled coal bottom ash as sustainable materials for cement replacement in cementitious Composites: A review. Construction and Building Materials, 338 (127624). pp. 1-20. ISSN 0950-0618. (Published)

Al Biajawi, Mohammad I. and Rahimah, Embong and Shubbar, Ali S (2023) Engineering properties of self-compacting concrete incorporating coal bottom ash (CBA) as sustainable materials for green concrete: a review. Journal of Building Pathology and Rehabilitation, 8 (105). pp. 1-16. ISSN 2365-3167. (Published)

Al Biajawi, Mohammad I. and Rahimah, Embong and Tayeh, Bassam A. (2023) A review of the role of glass waste on the fresh and mechanical properties of concrete as an environmentally friendly materials. Innovative Infrastructure Solutions, 8 (11). pp. 1-19. ISSN 2364-4176. (Published)

Al Biajawi, Mohammad Ismail Yousef and Wahppe Alkasawneh, Rufaidah and Mostafa, Sahar A. and Izwan, Johari and Rahimah, Embong and Khairunisa, Muthusamy (2021) Performance of sustainable concrete containing recycled latex gloves and silicone catheter under elevated temperature. Journal of King Saud University - Engineering Sciences. pp. 1-13. ISSN 1018-3639. (In Press / Online First) (In Press / Online First)

Al Farsi, Ghaliya and Azmi, Mohd Yusof and Awanis, Romli and Tawafak, Ragad M. and Malik, Sohail Iqbal and Jabbar, Jasiya and Mohd Ezanee, Rsuli (2021) A review of virtual reality applications in an educational domain. International Journal of Interactive Mobile Technologies, 15 (22). pp. 99-110. ISSN 1865-7923. (Published)

Al Gariri, Salem Mohammed Salem and Baqadeem, Abdullah Omar Abdullah and Moon, Lee Pei and Mazlan, Abu Seman and Khairil Azman, Masri (2023) The performance of stone mastic asphalt incorporating iron ore. Civil Engineering and Architecture, 11 (6). pp. 3571-3576. ISSN 2332-1091. (Published)

Al Jaber, Maryam and Nurmunira, Muhammad and Selvaraj, Jeevanraj (2024) Application of industrial by‑product waste as soil stabilising backfill material using a multi‑layering method. Discover Civil Engineering, 1 (31). pp. 1-15. ISSN 2948-1546. (Published)

Al Jasmi, S. and Nur Farhayu, Ariffin and Seman, M. A. (2021) The research of blast resistant of reinforcement concrete beams in concrete structures at off-site oil and gas plant. Construction, 1 (2). pp. 85-92. ISSN 2785-8731. (Published)

Al Mansur, Ahmed and Amin, Md Ruhul and Hossain Lipu, Molla Shahadat and Islam, Md Imamul and Ashique, Ratil H. and Shams, Zubaeer and Haq, Mohammad Asif ul and Maruf, Md Hasan and Shihavuddin, Asm S.M. (2023) The effects of non-uniformly-aged photovoltaic array on mismatch power loss : A practical investigation towards novel hybrid array configurations. Sustainability (Switzerland), 15 (13153). pp. 1-17. ISSN 2071-1050. (Published)

Al Mansur, Ahmed and Islam, Md Imamul and Alam, Md Sabbir and Mohd Shawal, Jadin and Sultana, Zinat and Ali, Md Mortuza Naushad and Shihavuddin, Asm S.M. (2024) Optimizing photovoltaic arrays : A tested dataset of newly manufactured PV modules for data-driven analysis and algorithm development. Data in Brief, 54 (110482). pp. 1-8. ISSN 2352-3409. (Published)

Al-Amshawee, Sajjad Khudhur Abbas and Husain, Mohamed Saad Bala and Mohd Yusri, Yunus and Nor Fadhillah, Mohamed Azmin and Oladosu, Temidayo Lekan (2022) Extruded and overlapped geometries of feed spacers for solution mixing in electrochemical reactors and electrodialysis-related processes. Chemical Engineering Communications. pp. 1-26. ISSN 0098-6445. (Published)

Al-Amshawee, Sajjad Khudhur Abbas and Mohd Yusri, Mohd Yunus (2023) Impact of membrane spacers on concentration polarization, flow profile, and fouling at ion exchange membranes of electrodialysis desalination: Diagonal net spacer vs. ladder-type configuration. Chemical Engineering Research and Design, 191. pp. 197-213. ISSN 0263-8762. (Published)

Al-Bahr, Tareq M. and Sitti Asmah, Hassan and Othman, Che Puan and Nordiana, Mashros and Nur Sabahiah, Abdul Sukor (2022) Speed-flow-geometric relationship for urban roads network. Applied Sciences (Switzerland), 12 (9). pp. 1-23. ISSN 2076-3417. (Published)

Al-Btoush, Mohammed A. KA. and Ahmad Tarmizi, Haron (2017) Barriers and Challenges of Building Information Modelling Implementation in Jordanian Construction Industry. Global Journal of Engineering Science and Research Management, 4 (9). pp. 9-20. ISSN 2349-4506. (Published)

Al-Dhahebi, Adel Mohammed and Ling, Jin Kiong and Syam, G. Krishnan and Yousefzadeh, Maryam and Elumalai, Naveen Kumar and Mohamed Saheed, Mohamed Shuaib and Seeram, Ramakrishna and Rajan, Jose (2022) Electrospinning research and products: The road and the way forward. Applied Physics Reviews, 9 (011319). pp. 1-44. ISSN 1931-9401. (Published)

Al-Fakih, K. and Chin, Siew Choo and Doh, Shu Ing (2017) Finite Element Analysis of Beam to Column Bolted Connection - A Review. Indian Journal of Science and Technology, 10 (8). pp. 1-9. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Al-Fakih, Kamal Ahmed and Chin, Siew Choo and Doh, Shu Ing (2017) Behavior Study of Top Seat Angle Steel Beam to Column Connections. Journal of Engineering and Applied Sciences, 12 (24). pp. 7539-7547. ISSN 1816-949x (Print); 1818-7803 (Online). (Published)

Al-Fakih, Kamal Ahmed and Chin, Siew Choo and Doh, Shu Ing (2018) Behavior of Extended End-Plate Steel Beam to Column Connections. The Open Civil Engineering Journal, 12. pp. 250-262. ISSN 1874-1495. (Published)

Al-Jasmi, Salah and Nur Farhayu, Ariffin and Mazlan, Abu Seman (2023) Model analysis of carbon fiber reinforcement properties for reinforced concrete beams to resist blast loads. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Al-Jbour, Nawzat D. and M. D. H., Beg and Jolius, Gimbun and A. K. M., Moshiul Alam (2021) Preparation and characterization of low molecular weight chitosan with different degrees of deacetylation by the acid hydrolysis method. International Journal of Applied Pharmaceutics, 13 (2). pp. 153-164. ISSN 0975-7058. (Published)

Al-Jipouri, Ali and Almurisi, Samah Hamed and AL-japairai, Khater Ahmed Saeed and Latifah Munirah, Bakar and Doolaanea, Abd Almonem (2023) Liposomes or extracellular vesicles : A comprehensive comparison of both lipid bilayer vesicles for pulmonary drug delivery. Polymers, 15 (318). pp. 1-63. ISSN 2073-4360. (Published)

Al-Khaleefa, Ahmed Salih and Mohd Riduan, Ahmad and Azmi Awang, Md Isa and Al-Saffar, Ahmed Ali Mohammed and Mona Riza, Mohd Esa and Reza Firsandaya, Malik (2019) MFA-OSELM algorithm for WiFi-based indoor positioning system. Information (Switzerland), 10 (4). pp. 1-20. ISSN 2078-2489. (Published)

Al-Mamun, Md. Abdullah and Ahmed, Nasim and Ahamed, Nizam Uddin and Rahman, S. A. M. Matiur and Ahmad, Badlishah and Sundaraj, K. (2014) Use of Wireless Sensor and Microcontroller to Develop Water-level Monitoring System. Indian Journal of Science and Technology, 7 (9). pp. 1325-1330. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Al-Mohammad, Mohammad and Ahmad Tarmizi, Haron and Mohammad Numan, Aloko and Rahimi, A. Rahman (2021) Factors affecting BIM implementation in post-conflict low-income economies: the case of Afghanistan. Journal of Engineering, Design and Technology. pp. 1-20. ISSN 1726-0531. (Published)

Al-Mohammad, Mohammad and Omar, Jamaludin (2018) A review of causes of delay in construction projects. International Journal of Engineering & Technology, 7 (4). pp. 5078-5083. ISSN 2227-524X. (Published)

Al-Mohammad, Mohammad S. and Ahmad Tarmizi, Haron and Esa, Muneera and Aloko, Mohammad Numan and Alhammadi, Yasir and K. S., Anandh and Rahimi, A. Rahman (2022) Factors affecting BIM implementation: evidence from countries with different income levels. Construction Innovation, ahead-of-pri. pp. 1-28. ISSN 1471-4175. (Published)

Al-Mohammad, Mohammad S. and Ahmad Tarmizi, Haron and Maya, Rana and Rahimi, A. Rahman (2024) Optimal Government Strategies for BIM Implementation in Low-Income Economies: A Case Study in Syria. Journal of Architectural Engineering, 30 (3). pp. 1-16. ISSN 1076-0431. (Published)

Al-Saffar, Zaid Hazim and Eltwati, Ahmed and Essam Aziz, Ehab and Yaacob, Haryati and Abdulsattar Dawood, Halah and Putra Jaya, Ramadhansyah and S. Al Jawahery, Mohammed and Shaffie, Ekarizan (2023) The use of vacuum residue as a potential rejuvenator in reclaimed asphalt pavement: Physical, rheological, and mechanical traits analysis. Recycling, 8 (3). pp. 1-16. ISSN 2313-4321. (Published)

Al-hokabi, Abdulmajeed and Muzamir, Hasan and Amran, Mugahed and Fediuk, Roman and Vatin, Nikolai Ivanovich and Alshaeer, Honin (2022) The effect of POFA-gypsum binary mixture replacement on the performance of mechanical and microstructural properties enhancements of clays. Materials, 15 (4). pp. 1-23. ISSN 1996-1944. (Published)

Alabadla, Mustafa and Fatimah, Sidi and Iskandar, Ishak and Hamidah D., Ibrahim and Lilly Suriani, Affendey and Zafienas, Che Ani and A. Jabar, Marzanah Ab and Bukar, Umar Ali and Devaraj, Navin Kumar and Ahmad Sobri, Muda and Tharek, Anas and Noritah, Omar and Mohd Izham, Mohd Jaya (2022) Systematic review of using machine learning in imputing missing values. IEEE Access, 10. pp. 44483-44502. ISSN 2169-3536. (Published)

Alara, Oluwaseun Ruth and Abdurahman, N.H. and Ali, H.A. and Zain, N.M. (2021) Microwave-assisted extraction of phenolic compounds from Carica papaya leaves: An optimization study and LC-QTOF-MS analysis. Future Foods, 3 (100035). pp. 1-8. ISSN 2666-8335. (Published)

Alara, Oluwaseun Ruth and Abdurahman, Nour Hamid and Ali, Hassan Alsaggaf (2023) Optimization of microwave-enhanced extraction parameters to recover phenolic compounds and antioxidants from Corchorus olitorius leaves. Chemical Papers, 77 (8). pp. 4217-4233. ISSN 0366-6352. (Published)

Alashwal, Basma Yahya and Saad Bala, M. and Gupta, Arun and Sharma, Swati and Mishra, Puranjan (2020) Improved Properties of Keratin-based Bioplastic Film Blended with Microcrystalline Cellulose: A Comparative Analysis. Journal of King Saud University - Science, 32 (1). pp. 853-857. ISSN 1018-3647. (Published)

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. and W. M. F., Wan Ishak (2018) Non-aqueous phase liquids distribution in three-fluid phase systems in double-porosity soil media: Experimental investigation using image analysis. Groundwater for Sustainable Development, 7. pp. 133-142. ISSN 2352-801X. (Published)

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Samira A., Kamaruddin and Wan Faizal, Wan Ishak (2017) Quantification Of Dense Nonaqueous Phase Liquid Saturation In Double-Porosity Soil Media Using A Light Transmission Visualization Technique. Journal of Porous Media, 20 (7). pp. 591-606. ISSN 1934-0508. (Published)

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, Mustafa M. and Samira, A. Kamaruddin and Wan Faizal, Wan Ishak (2017) Assessment of the Behaviour of Soil Structure in Double-Porosity Kaolin Media Using Light Transmission Visualization (LTV) Method. International Journal of Geotechnical Engineering, 11 (3). pp. 316-320. ISSN 1938-6362 (Print) 1939-7879 (Online). (Published)

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, Mustafa M. and Wan Faizal, Wan Ishak and Kamaruddin, Samira A. (2015) An Overview of Photographic Methods in Monitoring Non-Aqueous Phase Liquid Migration in Porous Medium. Special Topics & Reviews in Porous Media, 6 (4). pp. 367-381. ISSN 2151-4798 (print); 2151-562X (online). (Published)

Alazaiza, M. Y. D. and Ngien, S. K. and Copty, N. and Bob, M. M. and Samira A., Kamaruddin (2019) Assessing the influence of infiltration on the migration of light non-aqueous phase liquid in double-porosity soil media using a light transmission visualization method. Hydrogeology Journal, 27 (2). pp. 581-593. ISSN 1431-2174 (print); 1435-0157 (online). (Published)

Alazaiza, M. Y. D. and Ngien, S. K. and Wan Faizal, Wan Ishak and Samira, A. Kamaruddin (2016) A Review of Light Reflection and Transmission Methods in Monitoring Non-Aqueous Phase Liquid Migration in Porous Media. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2319-2326. ISSN 1819-6608. (Published)

Alazaiza, Motasem Y. D. and Copty, Nadim K. and Ngien, S. K. and Bob, Mustafa M. and Aburas, Maher M. (2019) Characterization of capillary pressure–saturation relationships for double-porosity medium using light transmission visualization technique. Transport in Porous Media, 130 (2). pp. 513-528. ISSN 0169-3913. (Published)

Alazaiza, Motasem Y. D. and Ngien, S. K. and Mustafa, M. Bob and Samira, A. Kamaruddin and Wan Faizal, Wan Ishak (2017) Influence of Macro-pores on DNAPL Migration in Double-Porosity Soil Using Light Transmission Visualization Method. Transport in Porous Media, 117 (1). pp. 103-123. ISSN 0169-3913. (Published)

Albtoosh, Ja’far A. Aldibat and Ahmad Tarmizi, Haron (2017) Variation Orders Causes in Construction Buildings Projects in Jordan. Global Journal of Engineering Science and Research Management, 4 (9). pp. 42-48. ISSN 2349-4506. (Published)

Albtoosh, Ja’far A. Aldibat and Ahmad Tarmizi, Haron and Shaqdan, Ashraf (2018) Analysis of Government Residential Projects Overruns in Jordan. Journal of Engineering and Applied Sciences, 13 (9). pp. 2570-2574. ISSN 1816-949x (Print); 1818-7803 (Online). (Published)

Albtoush, Faten Ahmad and Doh, Shu Ing (2019) A review on causes of cost overrun in the construction projects. International Journal of New Innovations in Engineering & Technology, 12 (3). pp. 15-22. ISSN 2319-6319. (Published)

Albtoush, Faten Ahmad and Doh, Shu Ing and A. R., Rahimi and Albtoush, Ja'far A. Aldiabat (2020) Factors effecting the cost management in construction projects. International Journal of Civil Engineering and Technology (IJCIET), 11 (1). pp. 105-111. ISSN 0976-6316. (Published)

Alenzi, Eisa and Sitti Asmah, Hassan and Othman, Che Puan (2022) Car following behaviours on multilane highways in Kuwait: A case study on road 40 during winter season. Journal of Engineering Research, 10 (1B). pp. 86-102. ISSN 2307-1885. (Published)

Aletba, Salam Ridha Oleiwi and Abdul Hassan, Norhidayah and Putra Jaya, Ramadhansyah and Aminudin, Eeydzah and Radeef, Hasanain Radhi and Al-Saffar, Zaid Hazim (2023) Marshall properties of asphalt containing alternative fine aggregates under different ageing conditions. Suranaree Journal of Science and Technology, 30 (1). pp. 1-7. ISSN 0858-849X. (Published)

Algahtany, Mohammed and Afiqah, R. Radzi and Al-Mohammad, Mohammad S. and Rahimi, A. Rahman (2023) Government Initiatives for Enhancing Building Information Modeling Adoption in Saudi Arabia. Buildings, 13 (9). ISSN 2075-5309. (Published)

Alhammadi, Ali and Soar, Jeffrey and Yusaf, Talal F. and Ali, Bashar Mahmood and Kadirgama, Kumaran (2023) Redefining procurement paradigms: A critical review of buyer-supplier dynamics in the global petroleum and natural gas industry. Extractive Industries and Society, 16 (101351). pp. 1-11. ISSN 2214-790X. (Published)

Alhammadi, Ali and Yusaf, Talal F. and Soar, Jeffrey and Ali, Bashar Mahmood and Kadirgama, Kumaran and Yousif, Belal F (2024) Revolutionizing procurement : Unveiling next-gen supplier strategies in UAE’s oil & gas sector. Extractive Industries and Society, 17 (101428). pp. 1-15. ISSN 2214-790X. (Published)

Alhammadi, Yasir and Al-Mohammad, Mohammad S. and Rahimi, A. Rahman (2024) Modeling the causes and mitigation measures for cost overruns in building construction : The case of higher education projects. Buildings, 14 (2). pp. 1-26. ISSN 2075-5309. (Published)

Alhammadi, Yasir and M. Farouk, Abdelrahman and Rahimi, A. Rahman (2024) Enhancing construction safety education : Insights from student perspectives. Buildings, 14 (660). pp. 1-18. ISSN 2075-5309. (Published)

Ali, Gomaa A. M. and Megiel, Elzbieta and Cieciórski, Piotr and Thalji, Mohammad R. and Romański, Jan and Algarni, H. and K. F., Chong (2020) Ferrocene functionalized multi-walled carbon nanotubes as supercapacitor electrodes. Journal of Molecular Liquids, 318 (114064). pp. 1-9. ISSN 0167-7322. (Published)

Ali Abdullah, Hassan and Salwani, Abdullah and Kamal Z., Zamli and Rozilawati, Razali (2022) Whale optimization algorithm strategies for higher interaction strength t-way testing. Computers, Materials and Continua, 73 (1). pp. 2057-2077. ISSN 1546-2218. (Published)

Ali Huddin, Ibrahim and Mohd Rosli, Mohd Hasan and Sani, Ashiru and Sharvin, Poovaneshvaran and Wong, Tracy Leh Xin and Megat Azmi, Megat Johari and Choong, Kok Keong and Putra Jaya, Ramadhansyah (2021) Physicomechanical assessments and heavy metals' leaching potential of modified asphalt binders incorporating crumb rubber and tin slag powders. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434. (Published)

Ali Laghari, Imtiaz and Samykano, Mahendran and Pandey, A.K and Said, Zafar and Kadirgma, K. and Tyagi, V.V. (2022) Thermal conductivity and Thermal properties enhancement of Paraffin/Titanium Oxide based Nano enhanced Phase change materials for Energy storage. Advances in Science and Engineering Technology International Conferences (ASET). pp. 1-5. ISSN 978-1-6654-1801. (Published)

Ali Zainal-Abidin, Mohamad Termizi and Abdul Syukor, Abd Razak and Muhammad Amirul Syafiq, Nasarudin and Nurul Farah Anisa, Hairolnizam and Farah Amalina, Ishak and Suryati, Sulaiman and Mohd Rashid, Ab Hamid and Noraini, Samat (2024) A review: The utilization of Indigofera Zollingeriana as animal feed additional supplements. Construction, 4 (2). pp. 118-123. ISSN 2785-8731. (Published)

Almanifi, Omair Rashed Abdulwareth and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed (2022) Human activity recognition based on wrist PPG via the ensemble method. ICT Express. pp. 1-5. ISSN 2405-9595. (In Press / Online First) (In Press / Online First)

Almuallim, Basel and Wan Sharuzi, Wan Harun and Al Rikabi, Ihab Jabbar and Mohammed, Hussein A. (2022) Thermally conductive polymer nanocomposites for filament-based additive manufacturing. Journal of Materials Science, 57 (6). 3993 -4019. ISSN 0022-2461. (Published)

Almurisi, Samah Hamed and AL-japairai, Khater Ahmed Saeed and Alshammari, Farhan and Alheibshy, Fawaz and Sammour, Rana M.F. and Doolaanea, Abd Almonem (2022) Stability of paracetamol instant jelly for reconstitution: Impact of packaging, temperature and humidity. Gels, 8 (3). pp. 1-14. ISSN 2310-2861. (Published)

Alrubaye, Ali Jamal and Muzamir, Hasan and Fattah, Mohammed Y. (2018) Effects of Using Silica Fume and Lime in the Treatment of Kaolin Soft Clay. Geomechanics and Engineering, 14 (3). pp. 247-255. ISSN 2005-307X(Print), 2092-6219(Online) . (Published)

Alrubaye, Ali Jamal and Muzamir, Hasan and Mohammed, Y. Fattah (2017) Stabilization of Soft Kaolin Clay with Silica Fume and Lime. International Journal of Geotechnical Engineering, 11 (1). pp. 90-96. ISSN 1938-6362 . (Published)

Alshaeer, Honin Ali Yahya and Irwan, J. M. and Alshalif, Abdullah Faisal and Al-Fakih, Amin and Ewais, Dina Yehia Zakaria and Salmi, Abdelatif and Alhokabi, Abdulmajeed Ali (2022) Review on carbonation study of reinforcement concrete incorporating with bacteria as self-healing approach. Materials, 15 (5543). pp. 1-17. ISSN 1996-1944. (Published)

Alsudani, Mustafa Qahtan and Abbdal Reflish, Salah and Moorthy, Kohbalan and Adnan, Myasar Mundher (2023) A new hybrid teaching learning based optimization -extreme learning machine model based intrusion-detection system. Materials Today: Proceedings, 80. pp. 2701-2705. ISSN 2214-7853. (Published)

Alsumaidaee, Yaseen Ahmed Mohammed and Paw, Johnny Koh Siaw and Yaw, Chong Tak and Tiong, Sieh Kiong and Chen, Chai Phing and Yusaf, Talal F. and Benedict, Foo and Kadirgama, Kumaran and Hong, Tanchung and Abd Alla, Ahmed N. (2023) Fault detection for medium voltage switchgear using a deep learning hybrid 1D-CNN-LSTM model. IEEE Access, 11. pp. 97574-97589. ISSN 2169-3536. (Published)

Alwashali, Salah Aldeen Muthanna Abdullah and Chin, Siew Choo (2023) A numerical study of brace-viscous damper system of fixed offshore jacket platforms under extreme environmental loads. International Journal of Integrated Engineering, 15 (2). pp. 273-282. ISSN 2229-838X. (Published)

Amalina Hanani, Ismail and Kusbiantoro, Andri and Chin, Siew Choo and Khairunisa, Muthusamy and Mukhlis, Islam and Tee, K. F. (2019) Pozzolanic reactivity and strength activity index of mortar containing palm oil clinker pretreated with hydrochloric acid. Journal of Cleaner Production, 242 (118565). pp. 1-10. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Amalina Hanani, Ismail and Kusbiantoro, Andri and Yian, Lee Tsu and Khairunisa, Muthusamy and Nurul Aida, Mohd Mortar (2024) Acceleration of early strength development in mortars containing soluble silica extracted from palm oil clinker. Archives of Metallurgy and Materials, 69 (1). pp. 269-273. ISSN 1733-3490. (Published)

Amani, Nima and Nasly, Mohamed Ali and Hosseini, Seyedmohsen (2011) Building component maintenance/ repair management: An economic analysis simulation. Applied Mechanics and Materials, 94-96. pp. 2134-2137. ISSN 1662-7482. (Published)

Aminuddin, Afrig and Ernawan, Ferda (2022) AuSR1 : Authentication and self-recovery using a new image inpainting technique with LSB shifting in fragile image watermarking. Journal of King Saud University - Computer and Information Sciences. pp. 1-19. ISSN 1319-1578. (In Press / Online First) (In Press / Online First)

Amirul Edham, Roslee and Nik Abdullah, Nik Mohamed and Thamburaja, Prakash and Jose, Rajan (2023) A generalized thermophysical model for materials from molecular clusters to bulk crystals. Physica B: Condensed Matter, 659 (414877). pp. 1-11. ISSN 0921-4526. (Published)

Amirul Hafiiz, Ruhaimi and Che Ku Nor Liana, Che Ku Hitam and Muhammad Arif, Ab Aziz and Norul Hisham, A. Hamid and Herma Dina, Setiabudi and Teh, L. P. (2022) The role of surface and structural functionalisation on graphene adsorbent nanomaterial for CO2 adsorption application : Recent progress and future prospects. Renewable and Sustainable Energy Reviews, 167 (112840). pp. 1-22. ISSN 1364-0321. (Published)

Amirul Syafiq, Murad and Nur Ain, Zuhairi and Mohd Amir Shahlan, Mohd Aspar and Mohd Akmal, Azhar (2024) Isolation and characterisation of potential probiotic yeast strains from local fermented foods : Gastrointestinal tolerance and antimicrobial activity assessment. Asia-Pacific Journal of Molecular Biology and Biotechnology, 32 (1). pp. 116-125. ISSN 0128-7451. (Published)

Amizatulhani, Abdullah and Mohammad Amirul Syukri, Md Zain and Mohd Yuhyi, Mohd Tadza and Hazarika, Hemanta (2019) Potential of tyre derived geomaterial as alternative material in gabion type retaining wall. International Journal of Integrated Engineering, 11 (6). pp. 274-284. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

An, Xue and Che, Jialing and Liu, Haifeng and Yang, Shuyan and Doh, Shu Ing (2021) Study on freeze-thaw resistance with NaCl of desert sand engineering cement composites. Physics and Chemistry of the Earth, 121. pp. 1-8. ISSN 1474-7065. (Published)

Anthony, Bokolo Jnr. and Mazlina, Abdul Majid and Awanis, Romli (2018) A proposed model for green practice adoption and implementation in information technology based organizations. Problemy Ekorozwoju - Problems Of Sustainable Development, 13 (1). pp. 95-112. ISSN 1895-6912. (Published)

Anwar, Ahmad and Ghufran, Rumana and Zularisam, A. W. (2011) Bioenergy from anaerobic degradation of lipids in palm oil mill effluent. Reviews in Environmental Science and Bio/Technology, 10 (4). pp. 353-376. ISSN 1572-9826. (Published)

Anwar, Ahmad and Ghufran, Rumana and Zularisam, A. W. (2012) Effect of cod loading rate on an upflow anaerobic sludge blanket reactor during anaerobic digestion of palm oil mill effluent with butyrate. Journal of Environmental Engineering and Landscape Management, 20 (4). pp. 256-264. ISSN 1648-6897. (Published)

Anwar, Ahmad and Ghufran, Rumana and Zularisam, A. W. (2011) Role of calcium oxide in sludge granulation and methanogenesis for the treatment of palm oil mill effluent using UASB reactor. Journal of Hazardous Materials, 198. pp. 40-48. ISSN 0304-3894. (Published)

Anwar, Ahmad and Rumana, Ghufran (2014) Evaluation of the Bio-Kinetics of Cement Kiln Dust In An Upflow Anaerobic Sludge Blanket Reactor for Treatment of Palm Oil Mill Effluent As A Function of Hydraulic Retention Time. Separation and Purification Technology, 133. pp. 129-137. ISSN 1383-5866. (Published)

Anwar, Ahmad and Rumana, Ghufran and Zularisam, A. W. (2011) Phytosequestration of Metals in Selected Plants Growing on a Contaminated Okhla Industrial Areas, Okhla, New Delhi, India. Water, Air, & Soil Pollution, 217 (1). pp. 255-266. ISSN 0049-6979(Print); 1573-2932(Online). (Published)

Ariffin, Arifuddin and A. A.M., Redhwan and A. M., Syafiq and S., Zainal Ariffin and A. R.M., Aminullah and Wan Hamzah, Azmi (2022) Stability analysis of hybrid Al2O- TiO2 nano-cutting fluids. Archives of Materials Science and Engineering, 117 (1). pp. 5-12. ISSN 1897-2764. (Published)

Arifin, Hanis Hazirah and Zardasti, Libriati and Lim, Kar Sing and Md. Noor, Norhazilan and Yahaya, Nordin and Mazlan, Ain Naadia and Mohd. Sam, Abdul Rahman (2021) Stress distribution analysis of composite repair with carbon nanotubes reinforced putty for damaged steel pipeline. International Journal of Pressure Vessels and Piping, 194, Part A (104537). pp. 1-12. ISSN 0308-0161. (Published)

Arifuddin, Ariffin and Abd Aziz, Mohammad Redhwan and Wan Hamzah, Wan Azmi and Nurul Nadia, Mohd Zawawi (2022) Performance of Al2O3/TiO2 hybrid nano-cutting fluid in mql turning operation via RSM approach. Lubricants, 10 (366). pp. 1-16. ISSN 2075-4442. (Published)

Arslan, A. and Masjuki, H. H. and Quazi, M. M. and Kalam, Md. Abul and Varman, M. and Jamshaid, M. and Rahman, S. M. Ashrafur and Imran, M. and Zulfattah, Z. M. and Anwar, M. T. and Gohar, G. A. and Mandalan, S. M. and Harith, M. H. (2019) Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads. Materials Research Express, 6 (10). pp. 1-2. ISSN 2053-1591. (Published)

Asghar, Rafiq and Ullah, Zahid and Azeem, Babar and Aslam, Sheraz and Hashmi, Muhammad Harris and Rasool, Ehtsham and Shaker, Bilawal and Anwar, Muhammad Junaid and Mustafa, Kainat (2022) Wind energy potential in Pakistan : A feasibility study in sindh province. Energies, 15 (8333). pp. 1-23. ISSN 1996-1073. (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Unsteady computational study of novel biologically inspired offshore vertical axis wind turbine at different tip speed ratios: a two-dimensional study. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6753-6772. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Asmara, Yuli Panca and Raman, Jeya Gopi and Suparjo, , and Herlina, Firda and Wei, Yap Chun (2024) Empirical study of the effect of nanocoolant particles on corrosion rate of 316 stainless steel. International Journal of Corrosion, 2024 (5577674). pp. 1-8. ISSN 1687-9325. (Published)

Asraf, M. Shuhaimi and Liyana, Mohamed Yusof and Rahimi, A. Rahman (2024) Drivers, capabilities, and challenges for adopting digital twin in facility management: A profound qualitative investigation. Journal of the Malaysian Institute of Planners, 22 (3). pp. 598-615. ISSN 1675-6215. (Published)

Asri, S. Asnor and Rahimi, A. Rahman and Saffuan, Wan Ahmad (2020) Causal factors for implementing environmental regulation: evidence from the erosion and sediment control plan in malaysia. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-11. ISSN 2289-697X (Print): 2462-1269 (Online). (Published)

Asri Syahmi, Asnor and Al-Mohammad, Mohammad S. and Saffuan, Wan Ahmad and Almutairi, Saud and Abdul Rahimi, Abdul Rahman (2022) Challenges for implementing environmental management plans in construction projects : The case of Malaysia. Sustainability (Switzerland), 14 (10). pp. 1-17. ISSN 2071-1050. (Published)

Athirah, Abdul Razak and Asma’, Abu-Samah and Normy Norfiza, A. Razak and Saliza, Baharudin and Fatanah, Suhaimi and Ummu Kulthum, Jamaludin and Azrina, Ralib and Mohd Basri, Mat Nor (2018) Virtual trial of glycaemic control performance and nursing workload assessment in diabetic critically ill patients. International Journal of Engineering & Technology, 7 (4). pp. 54-58. ISSN 2227-524X. (Published)

Atik, Faysal and Ngui, Wai Keng and Lim, M. H. (2021) Noise eliminated ensemble empirical mode decomposition for bearing fault diagnosis. Journal of Vibration Engineering & Technologies. pp. 1-17. ISSN 2523-3939. (Published)

Awad, Omar I. and Zhou, Bo and Kadirgama, Kumaran and Chen, Zhenbin and Mohammed, M. N. (2024) Nonthermal plasma-assisted catalysis NH3 decomposition for COx-free H2 production : A review. International Journal of Hydrogen Energy, 56. pp. 452-470. ISSN 0360-3199. (Published)

Awang Shri, D.N. and Tsuchiya, Koichi and Yamamoto, Akiko (2014) Effect of high-pressure torsion deformation on surface properties and biocompatibility of Ti-50.9 mol. %Ni alloys. Biointerphases, 9 (2). 029007-1. ISSN 1934-8630. (Published)

Azad, Saiful and Mahmud, Mufti and Kamal Zuhairi, Zamli and Kaiser, M. Shamim and Jahan, Sobhana and Razzaque, Md Abdur (2024) iBUST: An intelligent behavioural trust model for securing industrial cyber-physical systems. Expert Systems with Applications, 238 (121676). pp. 1-16. ISSN 0957-4174. (Published)

Azad, Saiful and Mokthar Neffati, Ahmed Ali and Mahmud, Mufti R. and Kaiser, M. Shamim and Ahmed, Muhammad Raisuddin and Kamruzzaman, Joarder (2023) UDTN-RS : A new underwater delay tolerant network routing protocol for coastal patrol and surveillance. IEEE Access, 11. pp. 142780-142793. ISSN 2169-3536. (Published)

Azam, M. and Hassan, S. A. and Puan, O. C. and Azhari, S. F. and Faiz, R. U. (2022) Performance of autonomous vehicles in mixed traffic under different demand conditions. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10050-10062. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Azed, M. A. and Doh, Shu Ing (2021) Properties of concrete containing microwaved sewage sludge ash. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8469 -8479. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Azhani, Zukri (2023) Bearing capacity of footing on soft clay strengthened by lightweight expanded clay aggregate raft. Construction, 3 (1). pp. 6-14. ISSN 2785-8731. (Published)

Azhani, Zukri (2012) Pekan Soft Clay Treated With Hydrated Lime As A Method Of Soil Stabilizer. Procedia Engineering, 53. pp. 37-41. ISSN 1877-7058. (Published)

Azhani, Zukri (2021) Settlement analysis of treated soft clay using LECA replacement through numerical modelling. Construction, 1 (2). pp. 76-84. ISSN 2785-8731. (Published)

Azhani, Zukri and Nadiatul Adilah, Ahmad Abdul Ghani (2014) A Study of Soil Stabilization by Hydrated Lime at Kampung Kedaik Asal, Rompin, Pahang, Malaysia. Applied Mechanics and Materials, 695. pp. 738-741. ISSN 1662-7482. (Published)

Azhani, Zukri and Ramli, Nazir and Dayang Zulaika, Abang Hasbollah and Amir Hamzah, Mustapha (2023) Lightweight Expanded Clay Aggregate (LECA) as replacement materials for geotechnical application. Physics and Chemistry of the Earth, 130 (103366). pp. 1-7. ISSN 1474-7065. (Published)

Azhani, Zukri and Ramli, Nazir and Shien, Ng Kok (2018) Settlement prediction of a group of lightweight aggregate (LECA) columns using finite element modelling. International Journal of Engineering and Technology(UAE), 7 (4). pp. 59-65. ISSN 2227-524X. (Published)

Azizi, Muzhda and Akbari, Sweeta (2018) A review on production of biodiesel from waste cooking oils. International Journal of Innovative Research and Scientific Studies, 1 (2). pp. 32-41. ISSN 2617-6548. (Published)

Azizuddin, Abd Aziz and Daisuke, Sumiyoshi and Yasunori, Akashi (2017) Low Cost Humidity Controlled Air-Conditioning System for Building Energy Savings in Tropical Climate. Journal of Building Engineering, 11. pp. 9-16. ISSN 2352-7102. (Published)

Azlina, Ismail and Intan Suhana, Mohd Razelan and A., Zulkiple and Siti Fatimah, Che Osmi and Norhaiza, Ghazali and Aizat, Alias (2011) Microscopic Simulation & Microscopic Analytical Model Comparison in Analyzing a Signalized Intersection. International Journal of Civil Engineering and Geo-Environmental, 2. pp. 19-25. ISSN 2180-2742. (Published)

Azliza, Abdullah and Liyana, Mohamed Yusof and Rahimi, A. Rahman (2024) Indicators, challenges and strategies in implementing net-zero carbon construction projects. Journal of the Malaysian Institute of Planners, 22 (3). pp. 303-319. ISSN 1675-6215. (Published)

Azman, Idris and Azim, Arshad and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin and Rosdi, Hussin (2014) Study of tidal current power generation by vertical axis underwater turbine with diffuser in Costal Peninsular Malaysia. Advances in Environmental Biology, 8 (22). pp. 116-119. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Azrag, Mohammed Adam Kunna and Tuty Asmawaty, Abdul Kadir and Jaber, Aqeel S. (2018) Segment particle swarm optimization adoption for large-scale kinetic parameter identification of escherichia coli metabolic network model. IEEE Access, 6 (8565855). pp. 78622-78639. ISSN 2169-3536. (Published)

Azreen Harina, Azman and Nurul Nadrah Aqilah, Tukimat and M A, Male (2021) Comparison of missing rainfall data treatment analysis at Kenyir Lake. IOP Conference Series: Materials Science and Engineering, 1144. pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Azreen Harina, Azman and Nurul Nadrah Aqilah, Tukimat and M. A., Malek (2021) Analysis of Linear Scaling Method in Downscaling Precipitation and Temperature. Water Resources Management. pp. 1-9. ISSN 0920-4741 (print); 1573-1650 (online). (Published)

Azreen Harina, Azman and Nurul Nadrah Aqilah, Tukimat and Male, M.A. (2021) Climate change impacts on hydropower generation at Kenyir Lake. Journal of Engineering Science and Technology, 16 (2). pp. 1287-1298. ISSN ISSN: 1823-4690. (Published)

Azri, Alias and Kuwagi, Kenya and Kogane, Atsuto and Hirano, Hiroyuki and Takami, Toshihiro (2014) Non-dimensionalization and Three-dimensional Flow Regime Map for Fluidization Analyses. Chemical Engineering Science, 119. pp. 199-211. ISSN 0009-2509. (Published)

Azrin, Abdul Aziz and Muhammad Yusri, Ismail and K., Sudhakar and C W, Mohd Nor and A, Zainal and Anwar, P. P. Abdul Majeed (2021) An overview of the spark plug engine profile in a spark ignition engine. IOP Conf. Series: Materials Science and Engineering, 1092 (012030). pp. 1-12. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Azrin, Abdul Aziz and Muhammad Yusri, Ismail and M.H., Mat Yasin and A., Zainal (2021) Effects of park energy on spark plug fault recognition in a spark ignition engine. Energy Engineering. ISSN 0199-8595. (Unpublished) (Unpublished)

B.A., Solahuddin and Yahaya, F. M. (2023) A state-of-the-art review on experimental investigation and finite element analysis on structural behaviour of fibre reinforced polymer reinforced concrete beams. Heliyon, 9 (e14225). pp. 1-35. ISSN 2405-8440. (Published)

Bachtiar, Dandi and Siregar, J. P. and Ahmad Shahrizan, Sulaiman and M. R. M., Rejab (2014) Tensile Properties of Hybrid Sugar Palm/Kenaf Fibre Reinforced Polypropylene Composites. Applied Mechanics and Materials, 695. pp. 155-158. ISSN 1662-7482. (Published)

Badaruddin, Muhammad and Zuwairie, Ibrahim and Kamarul Hawari, Ghazali and Mohd Riduwan, Ghazali and Kian, Sheng Lim and Sophan Wahyudi, Nawawi and Nor Azlina, Ab. Aziz and Marizan, Mubin and Norrima, Mokhtar (2014) Performance Evaluation of Vector Evaluated Gravitational Search Algorithms Based on ZDT Test Functions. International Journal of Simulation: Systems, Science & Technology (IJSSST), 15 (1). pp. 1-6. ISSN 1473-8031 (print); 1473-804x (online). (Published)

Badraddin, A. K. and Abdul Rahimi, Abdul Rahman and Almutairi, Saud and Esa, Muneera (2021) Main challenges to concrete recycling in practice. Sustainability, 13 (19). pp. 1-15. ISSN 2071-1050. (Published)

Badraddin, Abdulmalek Khaled Mohammed and Afiqah R., Radzi and Almutairi, Saud and Rahimi, A. Rahman (2022) Critical success factors for concrete recycling in construction projects. Sustainability, 14 (5). pp. 1-19. ISSN 2071-1050. (Published)

Bahamid, Rami A. and Doh, Shu Ing and Muhamad, Azry Khoiry and Kassem, Mukhtar A. and Al-Sharafi, Mohammed A. (2022) The Current Risk Management Practices and Knowledge in the Construction Industry. Buildings, 12 (7). pp. 1-13. ISSN 2075-5309. (Published)

Baker, E. J. and Alazawi, S. A. and Ahmed, N. T. and Ismail, M. A. and Hassan, R. and Halim, S. A. and Sutikno, T. (2021) User identification system for inked fingerprint pattern based on central moments. Indonesian Journal of Electrical Engineering and Computer Science, 24 (2). pp. 1149-1160. ISSN 2502-4752. (Published)

Bakhit, Abdelmoneim Ahmed and Mohd Faizal, Jamlos and Muhammad Aqil Hafizzan, Nordin and Mohd Aminudin, Jamlos and Rizalman, Mamat and M. A. M., Nawi and Agus, Nugroho (2024) Design of a low-cost IoT-based biofloc water quality monitoring system. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 153-162. ISSN 2289-7895. (Published)

Balfaqih, M. and Jabbar, W. and Khayyat, M. and Hassan, R. (2021) Design and development of smart parking system based on fog computing and internet of things. Electronics (Switzerland), 10 (24). pp. 1-18. ISSN 2079-9292. (Published)

Bao, Chao and Lv, Dahai and Wang, Huxiang and Zhang, Yuhang and Ma, Xiaotong and Lim, Kar Sing and Zhang, Juping (2023) Progressive collapse resistance mechanism of RC frame structure considering reinforcement corrosion. Modelling and Simulation in Engineering, 2023 (4451011). pp. 1-21. ISSN 1687-5591. (Published)

Baqadeem, A. O. A. and Khairil Azman, Masri (2023) Fibers in asphalt mixture: A state-of-the-art review. Construction, 3 (1). pp. 115-122. ISSN 2785-8731. (Published)

Bashar, S. Mohammed and Cheng, Hock Tian (2013) Immediate Deflection of Pretensioned Inverted T-Beam with Circular Web Openings Strengthened with GFRP Using Response Surface Methodology. Key Engineering Materials, 594/95. pp. 516-520. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Bashir, Abubakar Abdulkadir and Rahida S.R., Mohd Zaki and A. T., Abd Wahab and Siti Nurqurratulainie, Miskan and Nguyen, Anh Tam and Vo, Dai Viet N. and Herma Dina, Setiabudi (2024) A concise review on surface and structural modification of porous zeolite scaffold for enhanced hydrogen storage. Chinese Journal of Chemical Engineering, 70. pp. 33-53. ISSN 1004-9541. (Published)

Bashir, M. Nasir and Saad, Hafiz Muhammad and Muhammad, Rizwan and Quazi, Moinuddin Mohammed and Ali, Muhammad Mahmood and Ahmed, Arslan E.M. and Zaidi, Asad Ali and Soudagar, Manzoore Elahi M. and Haseeb, Abdul S.Md Abdul and Naher, Sumsun (2022) Effects of tin particles addition on structural and mechanical properties of eutectic Sn–58Bi solder joint. Journal of Materials Science: Materials in Electronics, 33 (28). pp. 22499-22507. ISSN 0957-4522. (Published)

Batool, Uzma and Mohd Ibrahim, Shapiai and Mostafa, Salama A. and Mohd Zamri, Ibrahim (2023) An attention-augmented convolutional neural network with focal loss for mixed-type wafer defect classification. IEEE Access, 11. 108891 -108905. ISSN 2169-3536. (Published)

Beg, M. D. H. and Gupta, Arun (2014) An Empirical Approach for Prediction of Natural Fiber Reinforced Polypropylene Composite Properties. Applied Mechanics and Materials, 534. pp. 69-73. ISSN 1662-7482. (Published)

Beg, Mohammad Sojon and Muhammad Yusri, Ismail and Miah, Md Saef Ullah and Mohamad Heerwan, Peeie (2023) Enhancing Driving Assistance System with YOLO V8-Based Normal Visual Camera Sensor. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (1). pp. 226-236. ISSN 2462-1943. (Published)

Beriache, M'hamed and Cherki, Brahim Hicham and Mokhtar Saïdia, Leila and Nor Azwadi, Che Sidik and Rizalman, Mamat (2023) Heat transfer enhancement through different heat sink/impinging air jet parameters an experimental approach. Mechanika, 29 (1). pp. 27-33. ISSN 1392-1207. (Published)

Bhallamudi, Ramkiran and Kumarasamy, Sudhakar and Sundarabalan, Chinnayan Karuppaiyah (2021) Effect of dust and shadow on performance of solar photovoltaic modules : Experimental analysis. Energy Engineering: Journal of the Association of Energy Engineering, 118 (6). pp. 1827-1838. ISSN 0199-8595. (Published)

Bhuvaneshwari, K. S. and Jeroish, Zachariah Ezhilnavaroji and Futane, Abhishek and Fahmi, Samsuri and Narayanamurthy, Vigneswaran (2024) Filtration analysis of microparticles using paper‑based microluidics. Chromatographia. ISSN 0009-5893. (Published)

Bhuvaneshwari, K.S. and Jeroish, Zachariah Ezhilnavaroji and Futane, Abhishek and Fahmi, Samsuri and Narayanamurthy, Vigneswaran (2024) Filtration analysis of microparticles using paper-based microfluidics. Chromatographia. pp. 1-11. ISSN 0009-5893. (In Press / Online First) (In Press / Online First)

Bing, Kho Yap and Rahimah, Jusoh and Mohd Zuki, Salleh and Zulkhibri, Ismail and Mohd Hisyam, Ariff (2021) Influence of viscous dissipation on the boundary layer flow of Cu-Al2O3 hybrid nanofluid. JP Journal of Heat and Mass Transfer, 23 (2). pp. 235-246. ISSN 0973-5763. (Published)

Bryan Andrew, Balasan and Azhan, Hashim and Muhammad Hafiz, Mazwir and Farah Hanani, Zulkifli (2020) Electrospinning synthesis of Bi-2223 superconducting nanowires. Solid State Phenomena, 307. pp. 93-97. ISSN 1662-9779. (Published)

Buhairi, Minhalina Ahmad and Mohd Foudzi, Farhana and Jamhari, Fathin Iliana and Sulong, Abu Bakar and Mohd Radzuan, Nabilah Afiqah and Muhamad, Norhamidi and Mohamed, Intan Fadhlina and Azman, Abdul Hadi and Wan Sharuzi, Wan Harun and M.S.H., Al-Furjan (2023) Review on volumetric energy density: inluence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion. Progress in Additive Manufacturing, 8 (2). pp. 265-283. ISSN 23639512. (Published)

Bunyamin, Bunyamin and Febrina Dian, Kurniasari and Reza Pahlevi, Munirwan and Putra Jaya, Ramadhansyah (2022) Effect of coral aggregates of blended cement concrete subjected to different water immersion condition. Advances in Civil Engineering, 2022 (2919167). pp. 1-10. ISSN 1687-8094. (Published)

Bunyamin, Bunyamin and Munirul, Hady and Reza Pahlevi, Munirwan and Putra Jaya, Ramadhansyah (2024) Cymbopogon nardus Leaf Ash as an Alternative Material for Enhancing Concrete Strength. Advances in Civil Engineering, 2024 (4997651). pp. 1-15. ISSN 1687-8094. (Published)

Bég, O. Anwar and Kabir, Muhammad Nomani and Md Jashim, Uddin and Ahmad Izani, Md Ismail and Alginahi, Yasser M. (2021) Numerical investigation of Von Karman swirling bioconvective nanofluid transport from a rotating disk in a porous medium with Stefan blowing and anisotropic slip effects. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235 (9). pp. 1-29. ISSN 0954-4062. (Published)

Cai, Huayang and Savenije, H. H. G. and Gisen, J. I. A. (2016) A Coupled Analytical Model for Salt Intrusion and Tides in Convergent Estuaries. Hydrological Sciences Journal, 61 (2). pp. 402-419. ISSN 2150-3435. (Published)

Cai, Weihan and Liu, Haifeng and Xu, Wenjing and Che, Jialing and Doh, Shu Ing (2024) The bonding performance of desert sand self-compacting concrete overlay on normal strength concrete substrate : Macro, micro, and ultrasonic testing. Journal of Building Engineering, 90 (109502). pp. 1-29. ISSN 2352-7102. (Published)

Chai, Changsaar and Tang, Joseph Tzuenyao and Chan, Szewen and Lee, Chia Kuang and Goh, Kaichen (2023) BIM Integration in Agile Scrum During The Design Phase. Journal of Engineering Science and Technology, Special Issue 4. pp. 302-316. ISSN 1823-4690. (Published)

Chairullah, Banta and Sungkar, Munira and Munirwan, Reza Pahlevi and Jamaluddin, Khaizal and Ramadhani, Ferda Febrian and Putra Jaya, Ramadhansyah (2024) The investigation of stability on slopes utilizing reinforcement gabion walls and concrete piles for mitigating landslide disasters. The Open Construction & Building Technology Journal, 18 (ahead-of-print). pp. 1-9. ISSN 1874-8368. (In Press / Online First) (In Press / Online First)

Chaitanya Reddy, Chilakamarry and Mimi Sakinah, A. M. and Zularisam, A. W. and Pandey, Ashok (2021) Glycerol waste to value added products and its potential applications. Systems Microbiology and Biomanufacturing, 1 (2). pp. 1-19. ISSN 2662-7663. (Published)

Chan, Szewen and Chai, Changsaar and Lim, Bibiana Chiuyiong and Ekambaram, Palaneeswaran and Mohd Khairolden, Ghani and Lee, Chia Kuang (2023) Navigating the path to construction 4.0: Policies, challenges, and strategies in Malaysian construction industry. GATR Journal of Business and Economics Review, 8 (3). pp. 89-103. ISSN 2636-9184. (Published)

Chan, Yi Shee and Chan, Mieow kee and Ngien, S. K. and Chew, Sho Yin and Teng, Yong Kang (2018) Performance of PEG on Immobilization of Zero Valent Metallic Particles on PVDF Membrane for Nitrate Removal. Membrane Water Treatment, 9 (1). pp. 1-7. ISSN 2005-8624 (Print), 2092-7037 (Online). (Published)

Che, Jialing and Liu, Chen and Wu, Ping and Li, Xinping and Liu, Haifeng and Doh, Shu Ing (2024) Comparative study on seismic behavior of corroded RC columns strengthened by ECC combined with steel cage /fiber grid/CFRP. Structures, 66 (106866). pp. 1-15. ISSN 2352-0124. (Published)

Che Wan, Mohd Noor and Amirah Nur, Fhatihah and Rizalman, Mamat and Wan Mohd, Norsani and Wan Nurdiyana, Wan Mansor and Mohammad Nor, Khasbi (2023) Properties study of B20 palm-methyl ester biodiesel added with oxidenanoparticle towards green marine fuels. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 212-222. ISSN 2462-1943. (Published)

Cheng, Hock Tian (2011) Engineering Properties of Epoxy Polymer Cement Concrete Reinforced with Glass Fibers. Journal of Engineering and Applied Sciences, 6 (3). pp. 191-199. ISSN 1816-949X. (Published)

Cheng, Hock Tian and Bashar, S. Mohammed and Kamal Nasharuddin, Mustapha (2009) Interaction diagram and response surface plot of pretensioned inverted T-beam with circular web openings. International Journal of Modelling, Identification and Control (IJMIC), 7 (2). pp. 209-218. ISSN 1746-6172. (Published)

Cheng, Hock Tian and Bashar S., Mohammed and Kamal Nasharuddin, Mustapha (2009) Finite element analysis and structural design of pretensioned inverted T-beams with web openings. Frontiers of Architecture and Civil Engineering in China, 3 (2). pp. 148-157. ISSN 1673-7407. (Published)

Cheng, Hock Tian and Bashar S., Mohammed and Kamal Nasharuddin, Mustapha (2009) Ultimate load analysis of pretensioned inverted T-beams with circular web openings. Frontiers of Architecture and Civil Engineering in China, 3 (3). pp. 262-271. ISSN 1673-7407. (Published)

Cheng, Hock Tian and Mohammed, Bashar S. and Kamal Nasharuddin, Mustapha (2009) Experimental and analytical analysis of pretensioned inverted T-beam with circular web openings. International Journal of Mechanics and Materials in Design, 5 (2). pp. 203-215. ISSN 1569-1713. (Published)

Cheng, Yoke Wang and Chong, Chi Cheng and Cheng, Chin Kui and Wang, Chi Hwa and Ng, Kim Hoong and Witoon, Thongthai and Lam, Man Kee and Lim, Jun Wei (2024) Long-term evaluation of palm oil mill effluent (POME) steam reforming over lanthanum-based perovskite oxides. Journal of Environmental Management, 351 (119919). pp. 1-13. ISSN 0301-4797. (Published)

Cheok, J. W. and Kee, T. K. and Chew, L. C. and Saffuan, Wan Ahmad and A., Adnan (2022) Structure vulnerability and risk analysis of 4-legged offshore structure. Construction, 2 (1). pp. 126-135. ISSN 2785-8731. (Published)

Chin, Siew Choo and Shafiq, Nasir and Kusbiantoro, Andri and Nuruddin, Muhd Fadhil Reinforced Concrete Deep Beams with Openings Strengthened Using FRP - A Review. Advanced Materials Research. (In Press / Online First) (In Press / Online First)

Chin, Siew Choo and Shafiq, Nasir and Nuruddin, Muhd Fadhil (2013) Effects of Large Openings in the Shear Zone of Reinforced Concrete Beams. Malaysian Construction Research Journal, 13 (2). ISSN 1985-3807. (Published)

Chin, Siew Choo and Shafiq, Nasir and Nuruddin, Muhd Fadhil FRP as strengthening material for Reinforced Concrete beams with openings - A review. KSCE Journal of Civil Engineering. (In Press / Online First) (In Press / Online First)

Chin, Siew Choo and Doh, Shu Ing and Kusbiantoro, Andri and Yih, Kang Wong and Saffuan, Wan Ahmad (2016) Characterization of Sewage Sludge Ash (SSA) in Cement Mortar. Journal of Engineering and Applied Sciences, 11 (4). pp. 2242-2247. ISSN 1819-6608. (Published)

Chin, Siew Choo and Moh, Jacky Neing Sheng and Doh, Shu Ing and Fadzil, Mat Yahaya and Jolius, Gimbun (2019) Strengthening of Reinforced Concrete Beams Using Bamboo Fiber/Epoxy Composite Plates in Flexure. Key Engineering Materials, 821. pp. 465-471. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Chin, Siew Choo and Shaaban, Ibrahim G. and Rizzuto, Joseph P. and Khan, Sadaqat U. and Diana, Mohamed and Nurul Iman, Muhammad Roslan and Azizah, Abdul Aziz (2024) Predictive models for mechanical properties of hybrid fibres reinforced concrete containing bamboo and basalt fibres. Structures, 61 (106093). pp. 1-8. ISSN 2352-0124. (Published)

Chin, Siew Choo and Shafiq, Nasir and Nuruddin, Muhd Fadhil (2016) Behaviour of RC Beams with CFRP-Strengthened Openings. Structural Concrete, 17 (1). pp. 32-43. ISSN 1751-7648. (Published)

Chin, Siew Choo and Tee, Kong Fah and Tong, Foo Sheng and Doh, Shu Ing and Jolius, Gimbun (2020) External strengthening of reinforced concrete beam with opening by bamboo fiber reinforced composites. Materials and Structures, 53 (6). pp. 1-12. ISSN 1359-5997. (Published)

Chin, Siew Choo and Tee, Kong Fah and Tong, Foo Sheng and Ong, Huei Ruey and Jolius, Gimbun (2019) Thermal and mechanical properties of bamboo fiber reinforced composites. Materials Today Communications, 23 (100876). pp. 1-14. ISSN 2352-4928. (Published)

Ching, Khong Sheh and Choo, Chin Siew (2024) Potential utilization of spent coffee waste in permeable concrete. Open Construction and Building Technology Journal, 18 (e18748368295411). pp. 1-15. ISSN 1874-8368. (Published)

Chong, B. W. and Rokiah, Othman and Putra Jaya, Ramadhansyah and Doh, Shu Ing and Li, Xiaofeng (2021) Mathematical modelling of concrete compressive strength with waste tire rubber as fine aggregate. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8344 -8355. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Chong, Beng Wei and Rokiah, Othman and Chan, Yee Ying and Ramadhansyah, Putra Jaya and Doh, Shu Ing and Mangi, Sajjad Ali (2020) Properties of mortar with fine eggshell powder as partial cement replacement. Materials Today: Proceedings, 46 (4). pp. 1574-1581. ISSN 2214-7853. (Published)

Chong, Beng Wei and Rokiah, Othman and Putra Jaya, Ramadhansyah and Doh, Shu Ing and Xiaofeng, Li (2020) Properties of concrete with eggshell powder: a review. Physics and Chemistry of the Earth, Parts A/B/C, 120. p. 1. ISSN 1474-7065. (Published)

Chowdhury, M. N. K. and Ahmad Fauzi, Ismail and Beg, M. D. H. and Khan, Maksudur R. and Gohari, Rasoul Jamshidi and Muhammad Abdul Razis, Saidin and M. R., Islam and Ong, Huei Ruey (2016) Control of Biodegradability in a Natural Fibre based Nanocomposite as a Function of Impregnated Copper Nanoparticle. RSC Advances, 6 (34). pp. 28937-28946. ISSN 2046-2069. (Published)

Chua, Gek Kee and Chew, Few Ne and Siti Hatijah, Mortan and Noraziah, Abu Yazid (2023) Protease production from fishery wastes for sustainable development of industrial biotechnology in malaysia. Environmental Engineering and Management Journal, 22 (4). pp. 671-688. ISSN 1582-9596. (Published)

Chuan, Zun Liang and Wan Nur Syahidah, Wan Yusoff and Azlyna, Senawi and Mohd Akramin, Mohd Romlay and Fam, Soo-Fen and Shinyie, Wendy Ling and Ken, Tan Lit (2022) A comparative effectiveness of hierarchical and nonhierarchical regionalisation algorithms in regionalising the homogeneous rainfall regions. Pertanika Journal of Science and Technology, 30 (1). pp. 319-342. ISSN 0128-7680. (Published)

Cionita, Tezara and Mohammad Hazim, Mohamad Hamdan and Siregar, Januar Parlaungan and Fitriyana, Deni Fajar and Ramli, Junid and Wong, Lingshing and Jamiluddin, Jaafar and Irawan, Agustinus Purna and Rihayat, Teuku and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Jehadus, Emilianus (2024) Overview of jute fibre as thermoplastic matrix polymer reinforcement. Journal of Renewable Materials, 12 (3). pp. 457-483. ISSN 2164-6325. (Published)

Cionita, Tezara and Siregar, Januar Parlaungan and Wong, Ling Shing and Cheng, Wan Hee and Fitriyana, Deni Fajar and Jamiluddin, Jaafar and Ramli, Junid and Irawan, Agustinus Purna and Hadi, Agung Efriyo (2022) The influence of filler loading and alkaline treatment on the mechanical properties of palm kernel cake filler reinforced epoxy composites. Polymers, 14 (3063). pp. 1-17. ISSN 2073-4360. (Published)

Cuce, Pinar Mert and Cuce, Erdem and Sudhakar, Kumarasamy (2022) A systematic review of thermal insulation performance of hollow bricks as a function of hollow geometry. International Journal of Ambient Energy, 43 (1). pp. 4406-4415. ISSN 0143-0750. (Published)

Cui, ZiZhi and Jing, Xin and Hao, JiaXing and Doh, Shu Ing (2020) Analysis of capillary water migration law of compacted loess in Ningxia. Polish Journal of Environmental Studies, 30 (1). pp. 61-70. ISSN 1230-1485. (Published)

D., Ramasamy and Z. A., Zainal and K., Kadirgama and Briggs, Horizon Walker-Gitano (2016) Effect of Dissimilar Valve Lift on a bi-fuel CNG Engine Operation. Energy, 112. 509 - 519. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Dar, Qamar Uz Zaman and Renhai, Pu and Sajid, Zulqarnain and Mehmood, Mubashir and Abdul, Wahab (2021) The provenance and tectonic settings of the greywacke member of the late neoproterozoic hazara formation lesser himalayas, northern pakistan: Evidence from geochemistry and petrography. Sains Malaysiana, 50 (12). pp. 3505-3522. ISSN 0126-6039. (Published)

Das, Likhan and Aslfattahi, Navid and Khairul, Habib and Saidur, R. and Das, Anupom and Kadirgama, Kumaran (2023) Thermohydraulic performance investigation of a heat exchanger with combined effect of ribbed insert and Therminol55/MXene+Al2O3 nanofluid : A numerical two-phase approach. Heliyon, 9 (e14283). pp. 1-17. ISSN 2405-8440. (Published)

Das, Likhan and Rubbi, Fazlay and Khairul, Habib and Aslfattahi, Navid and Rahman, Saidur and Yahya, Syed Mohd and Kadirgama, Kumaran (2022) Insight into the investigation of diamond nanoparticles suspended therminol 55 nanofluids on concentrated photovoltaic/thermal solar collector. Nanomaterials, 12 (2975). pp. 1-22. ISSN 2079-4991. (Published)

Das, Likhan and Rubbi, Fazlay and Khairul, Habib and Aslfattahi, Navid and Saidur, Rahman Md and Yahya, Syed Mohd and Kadirgama, Kumaran (2022) Insight into the investigation of diamond nanoparticles suspended therminol®55 nanofluids on concentrated photovoltaic/thermal solar collector. Nanomaterials, 12 (2975). pp. 1-22. ISSN 2079-4991. (Published)

Dayangku Noorfazidah, Awang Sh'ri and Muhammad Abdul Hisyam, Abu Hassan and Zahiruddeen Salam, Zahari and W. S., Wan Harun (2019) Finite element simulation of equal channel angular pressing: effect of die angle and number of passes. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6402-6414. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Dayangku Noorfazidah, Awang Sh'ri and Zahiruddeen Salam, Zahari and Yamamoto, Akiko (2021) Effect of ECAP die angle on mechanical properties and biocompatibility of SS316L. Metals, 11 (10). pp. 1-10. ISSN 2075-4701. (Published)

Deng, Meilin L. and Yang, Jing and Bao, Chao and Norhazilan, Md Noor and Lim, Kar Sing (2024) An overview of theoretical analysis method for composite repaired pipelines. The Open Civil Engineering Journal, 18 (e18741495285483). pp. 1-14. ISSN 1874-1495. (Published)

Dewi, Rozanna and Sylvia, Novi and Zulnazri, , and Riza, Medyan and Siregar, Januar Parlaungan and Cionita, Tezara and Kusuma, Budhi Santri (2024) Characterization of sago starch-based degradable plastic with agricultural waste cellulose fiber as filler. AIMS Environmental Science, 11 (2). pp. 304-323. ISSN 2372-0352. (Published)

Diana, Mohamed Ali and Chin, Siew Choo and Bao, Chao and Jolius, Gimbun (2024) Enhancement of reinforced concrete durability and performance by bamboo and basalt fibres. Physics and Chemistry of the Earth, Parts A/B/C, 134 (103572). pp. 1-8. ISSN 1474-7065. (Published)

Din, Fakhrud and Khalid, Shah and Fayaz, Muhammad and Gwak, Jeonghwan and Kamal Z., Zamli and Mashwani, Wali Khan (2022) Fuzzy adaptive teaching learning-based optimization for solving unconstrained numerical optimization problems. Mathematical Problems in Engineering, 2022 (2221762). pp. 1-17. ISSN 1024-123X. (Published)

Doh, S. I. and Li, J. (2022) Railway defect detection method: A review. Construction, 2 (2). pp. 22-30. ISSN 2785-8731. (Published)

Doh, Shu Ing and Alhokabi, Abdulmajeed Ali (2019) Study on the mechanical properties of bottom ash as a partial sand replacement in a non-load bearing fly ash bricks. Study on The Mechanical Properties of Bottom Ash as a Partial Sand Replacement in a Non-Load Bearing Fly Ash Bricks. pp. 59-66. ISSN 2523-2231. (Published)

Doh, Shu Ing and Chin, Siew Choo and Tan, Kim Guan and Suil, Adilen (2016) The Use of Sewage Sludge Ash (SSA) as Partial Replacement of Cement in Concrete. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3371-3375. ISSN 1819-6608. (Published)

Doh, Shu Ing and Lim, Kar Sing and Jolius, Gimbun and Chin, Siew Choo and Lim, S.P. and Tong, Foo Sheng (2019) Application of bamboo fibre composite in structural strengthening. Malaysian Construction Research Journal, 6 (1). pp. 185-192. ISSN 1985-3807. (Published)

Duraisamy, Youventharan and Rokiah, Othman and S., Mohd Arif and Kirushna Moorthi, Jeevithan (2022) Influences of waste inclusion on impact and crushing force resistance of track ballast. Key Engineering Materials, 912. pp. 225-240. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Durez, Asif and Ali, Muzaffar and Waqas, Adeel and Nazir, Kamran and Sudhakar, Kumarasamy (2023) Modelling and optimization of phase change materials (PCM)-based passive cooling of solar PV panels in multi climate conditions. Frontiers in Energy Research, 11 (1121138). pp. 1-11. ISSN 2296-598X. (Published)

Dwivedi, Pushpendu and Ganesh, Sujay Ashwinraj and Kumarasamy, Sudhakar and Soni, Archana and Priya, S. Shanmuga (2023) Thermal and electrical performance of uncooled, nature-cooled, and photovoltaic thermal module. International Journal of Photoenergy, 2023 (4720545). pp. 1-12. ISSN 1687-529X (Online). (Published)

E. A., Aziz and W. A., Wan Omar and N. A., Zainordin (2015) The Environmental Fate of Natural and Synthetic Oestrogens; Comparison between Prediction Tools and Experimental Values. International Journal of Environmental Science and Development, 6 (7). pp. 526-529. ISSN 2010-0264. (Published)

Edi, Syafri and Jamaluddin, Jamaluddin and Nasmi, Herlina Sari and Melbi, Mahardika and Lisman, Suryanegara and Rafles, Sinaga and Ferriawan, Yudhanto and Rahadian, Zainul and Agus, Nugroho and Anish, Khan and Mohammad, A. Wazzan (2023) Effect of ultrafine grinding and ultrasonication duration on the performance of polyvinyl alcohol (PVA) agave gigantea cellulose micro fiber (CMF) bio-composite film. Journal Of Natural Fibers, 20 (2192545). pp. 1-19. ISSN 1544-0478. (Published)

Edriyana, Abd Aziz and Abdul Syukor, Abd Razak and Suryati, Sulaiman and Hasmanie, Abdul Halim and Islam, Mir Sujaul and N. A., Zainodin and W. A., Wan Omar (2016) The Performance of Coconut Husk and Shell for the Removal of Methyl Red from Aqueous Solution: Adsorption Equilibrium and Kinetic Study. Journal of Engineering and Applied Sciences, 11 (11). pp. 2500-2507. ISSN 1816-949X. (Published)

Edriyana, Abd Aziz and Syazwan N., Moni and Marlinda, Abdul Malek and Nadiah, Mokhtar and Amirul A., Borhan (2018) Prediction of blue water footprint accounting for water treatment plants in Kuantan river basin. International Journal of Engineering & Technology, 7 (4). pp. 286-293. ISSN 2227-524X. (Published)

Edriyana, Abd Aziz and W. A., Wan Omar and Aznilnda, Zainodin and Islam, Mir Sujaul (2016) The Role of Organic Carbon in Natural and Synthetic Oestrogens Sorption onto Soils. International Journal of Environmental Science and Development, 7 (7). pp. 520-524. ISSN 2010-0264. (Published)

Edy, Fradinata and Noor, M. M. and Zurnila Marli, Kesuma and Sakesun, Suthummanon and Didi, Asmadi (2024) Leveraging hybrid ANN–AHP to optimize cement industry average inventory levels. International Journal of Advances in Intelligent Informatics, 10 (1). pp. 159-170. ISSN 2442-6571. (Published)

Ekarizan, Shaffie and H. A., Rashid and Shiong, Fiona and Ahmad Kamil, Arshad and Juraidah, Ahmad and Wardati, Hashim and Putra Jaya, Ramadhansyah and K. A., Masri (2021) Performance characterization of stone mastic asphalt using steel fiber. Journal of Advanced Industrial Technology and Application, 2 (2). pp. 22-33. ISSN 2716-7097. (Published)

Elagib, Tienah H.H. and Kabbashi, Nassereldeen A. and Alam, Md Zahangir and Hassan, Elwathig A.M. and Mirghani, Mohamed Elwathig Saeed and Azhari, Nour Hamid Abduelraman (2023) Dual nitrogen-sulfur-doping induce microwave absorption and EMI shielding in nanocomposites based on graphene. Journal of Advanced Dielectrics (2350029). pp. 1-11. ISSN 2010-135X. (In Press / Online First) (In Press / Online First)

Elangovan, Kavery and Saravanan, Prabhu and Campos, Cristian H. and Sanhueza-Gómez, Felipe and Khan, Md Maksudur Rahman and Chin, Sim Yee and Krishnan, Santhana and Viswanathan Mangalaraja, Ramalinga (2023) Outline of microbial fuel cells technology and their significant developments, challenges, and prospects of oxygen reduction electrocatalysts. Frontiers in Chemical Engineering, 5 (1228510). pp. 1-27. ISSN 2673-2718. (Published)

Elarbe, Basem and Elganidi, Ibrahim and Norida, Ridzuan and Kamal, Yusoh and Norhayati, Abdullah and Vijaya Kumar, Shamala (2021) Application of full factorial design to screen the factors influencing the wax deposition of Malaysian crude oil. Journal of Petroleum Exploration and Production Technology, 12. pp. 1829-1839. ISSN 2190-0558. (Published)

Elarbe, Basem and Elganidi, Ibrahim and Norida, Ridzuan and Kamal, Yusoh and Norhayati, Abdullah and Vijayakumar, Shamala (2021) Synthesis, characterization and evaluation of stearyl acrylate-co-behenyl acrylate copolymer as a pour point depressant of waxy crude oil. Journal of Petroleum Exploration and Production Technology, 12. pp. 1811-1828. ISSN 2190-0558. (Published)

Elarbe, Basem and Elganidi, Ibrahim and Ridzuan, N. and Abdullah, N. and Kamal, Y. (2021) Paraffin wax deposition and its remediation methods on crude oil pipelines: A systematic review. Maejo International Journal of Energy and Environmental Communication, 3 (3). pp. 6-34. ISSN 2673-0537. (Published)

Eljak, Hana and Ashraf Osman, Ibrahim and Saeed, Fakhreldin and Hashem, Ibrahim Abaker Targio and Abdelmaboud, Abdelzahir and Syed, Hassan Jamil and Abulfaraj, Anas Waleed and Mohd Arfian, Ismail and Elsafi, Abu bakar (2024) E-learning-based cloud computing environment : A systematic review, challenges, and opportunities. IEEE Access, 12. pp. 7329-7355. ISSN 2169-3536. (Published)

Elkbuli, Mohamed O. and Nurhidayah, Azmy and Lee, Chia Kuang (2024) Enhancing project manager communication soft skills and risk management practices in Libyan oil and gas construction projects: The role of experience. Journal of Engineering, Design and Technology, ahead-of-print (ahead-of-print). pp. 1-22. ISSN 1726-0531. (In Press / Online First) (In Press / Online First)

Elmahaishi, Madiha Fathi and Raba’ah Syahidah, Azis and Ismayadi, Ismail and Muhammad Syazwan, Mustaffa and Zulkifly, Abbas and Khamirul Amin, Matori and Farah Diana, Muhammad and Nor Kamilah, Saat and Rodziah, Nazlan and Idza Riati, Ibrahim and Nor Hapishah, Abdullah and Nurhidayaty, Mokhtar (2021) Structural, electromagnetic and microwave properties of magnetite extracted from mill scale waste via conventional ball milling and mechanical alloying techniques. Materials, 14 (22). pp. 1-24. ISSN 1996-1944. (Published)

Elmutasim, Imadeldin Elsayed and Izzeldin Ibrahim, Mohamed Abdelaziz and Bilal, Khalid Hamid (2023) Seawater salinity modelling based on electromagnetic wave characterization. International Journal of Electrical and Computer Engineering (IJECE), 13 (4). pp. 4112-4118. ISSN 2088-8708. (Published)

Eltwati, Ahmed Salama and Al-Saffar, Zaid Hazim and Azman, Mohamed and Mohd Rosli, Hainin and Elnihum, Ahmed and Enieb, Mahmoud (2022) Synergistic effect of SBS copolymers and aromatic oil on the characteristics of asphalt binders and mixtures containing reclaimed asphalt pavement. Construction and Building Materials, 327 (127026). pp. 1-14. ISSN 0950-0618. (Published)

Eltwati, Ahmed Salama and Azman, Mohamed and Mohd Rosli, Hainin and Jusli, Euniza and Enieb, Mahmoud (2022) Rejuvenation of aged asphalt binders by waste engine oil and SBS blend : Physical, chemical, and rheological properties of binders and mechanical evaluations of mixtures. Construction and Building Materials, 346 (128441). pp. 1-18. ISSN 0950-0618. (Published)

Elzein, Nahla Mohammed and Mazlina, Abdul Majid and Hashem, Ibrahim Abaker Targio and Ashraf Osman, Ibrahim and Abulfaraj, Anas W. and Binzagr, Faisal (2023) JQPro : Join query processing in a distributed system for big RDF data using the hash-merge join technique. Mathematics, 11 (5). pp. 1-20. ISSN 2227-7390. (Published)

Erdiwansyah, E. and Gani, Asri and Rizalman, Mamat and Mahidin, M. and Sudhakar, Kumarasamy and S. M., Rosdi and Husin, Husni (2022) Biomass and wind energy as sources of renewable energy for a more sustainable environment in Indonesia: a review. Archives of Environmental Protection, 48 (3). pp. 57-69. ISSN 2083-4772. (Published)

Erdiwansyah, E. and Gani, Asri and Rizalman, Mamat and Nizar, Muhammad and Yana, Syaifuddin and S. M., Rosdi and Mohd Zaki, Muhammad Faiz and Sardjono, Ratnaningsih Eko (2023) The business model for access to affordable re on economic, social, and environmental value : A review. Geomatics and Environmental Engineering, 17 (5). pp. 5-43. ISSN 1898-1135. (Published)

Erdiwansyah, Erdiwansyah and Mahidin, Mahidin and Husin, Husni and Faisal, Muhammad and Usman, Usman and Muhtadin, Muhtadin and Gani, Asri and Rizalman, Mamat (2022) Modification of perforated plate in fluidized-bed combustor to provide sufficient air supply in the combustion. Frontiers in Heat and Mass Transfer (FHMT), 18 (25). pp. 1-6. ISSN 2151-8629. (Published)

Erdiwansyah, Erdiwansyah and Mahidin, Mahidin and Husin, Husni and Nasaruddin, Nasaruddin and Gani, Asri and Faisal, Muhammad and Muhtadin, Muhtadin and Zaki, Muhammad and Rizalman, Mamat (2023) Comparison of temperature, radiation rate, heat loss, furnace and thermal efficiencies of different plates in the FBC combustion chamber. Frontiers in Heat and Mass Transfer, 20 (29). pp. 1-9. ISSN 2151-8629. (Published)

Erdiwansyah, Erdiwansyah and Mahidin, Mahidin and Husni, Husin and Nasaruddin, Nasaruddin and Asri, Gani and Rizalman, Mamat (2023) Modification of perforated plate in fluidized-bed combustor chamber through computational fluid dynamics simulation. Results in Engineering, 19 (101246). pp. 1-12. ISSN 2590-1230. (Published)

Ernawan, Ferda (2023) An improved hiding information by modifying selected DWT coefficients in video steganography. Multimedia Tools and Applications. pp. 1-17. ISSN 1380-7501(print); 1573-7721(online). (In Press / Online First) (In Press / Online First)

Ernawan, Ferda and Adi, Prajanto Wahyu and Liew, Siau-Chuin and Sarwoko, Eko Adi and Winarno, Edy (2022) Fast image watermarking based on signum of cosine matrix. Indonesian Journal of Electrical Engineering and Computer Science, 25 (3). pp. 1383-1391. ISSN 2502-4752. (Published)

Ernawan, Ferda and Aminuddin, Afrig and Eh Phon, Danakorn Nincarean and Mohd Faizal, Ab Razak and Ahmad Firdaus, Zainal Abidin (2022) Three layer authentications with a spiral block mapping to prove authenticity in medical images. International Journal of Advanced Computer Science and Applications (IJACSA), 13 (4). pp. 211-223. ISSN 2158-107X; 2156-5570(Online). (Published)

Ernawan, Ferda and Ariatmanto, Dhani (2023) An efficient adaptive scaling factor for 4×4 DCT image watermarking. Multimedia Tools and Applications, 82 (6). pp. 8603-8621. ISSN 1380-7501. (Published)

Ernawan, Ferda and Ariatmanto, Dhani (2023) A recent survey on image watermarking using scaling factor techniques for copyright protection. Multimedia Tools and Applications, 82 (18). pp. 27123-27163. ISSN 1380-7501. (Published)

Ernawan, Ferda and Ramalingam, Mritha and Sadiq, Ali Safa and Zuriani, Mustaffa (2017) An improved imperceptibility and robustness of 4×4 DCT-SVD image watermarking using modified entropy. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (2-7). pp. 111-116. ISSN 2180-1843. (Published)

Esfahani, Hamid and Ramakrishna, Seeram and Rajan, Jose (2017) Electrospun Ceramic Nanofiber Mats Today: Synthesis, Properties, and Applications. Materials, 10 (11). pp. 1-43. ISSN 1996-1944. (Published)

Esmaeili Shayan, Mostafa and Najafi, Gholamhassan and Ghobadian, Barat and Gorjian, Shiva and Rizalman, Mamat and Mohd Fairusham, Ghazali (2022) Multi-microgrid optimization and energy management under boost voltage converter with Markov prediction chain and dynamic decision algorithm. Renewable Energy, 201. pp. 179-189. ISSN 0960-1481. (Published)

Eswaramoorthi, Vijayamurugan and Kuan, Garry and Mohamad Razali, Abdullah and Anwar, P. P. Abdul Majeed and Suppiah, Pathmanathan K. and Musa, Rabiu Muazu (2022) Design and validation of a virtual physical education and sport science–related course: A learner’s engagement approach. International Journal of Environmental Research and Public Health, 19 (13). pp. 1-16. ISSN 1661-7827. (Published)

Eswaramoorthi, Vijayamurugan and Muhammad Zulhusni, Suhaimi and Mohamad Razali, Abdullah and Zulkefli, Sanip and Anwar, P. P. Abdul Majeed and Muhammad Zuhaili, Suhaimi and Clark, Cain C. T. and Musa, Rabiu Muazu (2022) Association of physical activity with anthropometrics variables and health-related risks in healthy male smokers. International Journal of Environmental Research and Public Health, 19 (12). pp. 1-15. ISSN 1661-7827. (Published)

Ezazi, Mohammadamin and Quazi, Moinuddin Mohammed (2023) Recent developments in two-dimensional materials-based membranes for oil–water separation. Membranes, 13 (677). pp. 1-24. ISSN 2077-0375. (Published)

Ezrin Hani, Sukadarin and Tong, Sudaratt Pet and Balqis Syahirah, Jamaludin and Junaidah, Zakaria and Nur Syazwani, Mohd Nawi (2019) Work-related musculoskeletal problems and the associated risk factors among rubber tappers: A case study at a village in Northern Peninsular Malaysia. Human Factors & Ergonomics Journal (HFEJ), 4 (2). pp. 29-34. ISSN 2590-3705. (Published)

F., Basrawi and Yamada, Takanobu and Obara, Shinaya (2014) Economic and Evironmental based Operation Strategies of a Hybrid Photovoltaic-microgas Turbine Trigeneration System. Applied Energy, 121. pp. 174-183. ISSN 0306-2619. (Published)

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and Zahari, Taha and K., Kadirgama and Nasrul Hadi, Johari (2015) The Investigation of Mechanical Properties on Natural Fiber Composites for Recurve Bow Material Selection. Advances in Environmental Biology, 9 (25). pp. 27-31. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Nurhasshikin, Sulaiman (2014) Corrosion Resistance of High Strength Concrete Containing Palm Oil Fuel Ash as Partial Cement Replacement. Research Journal of Applied Sciences, Engineering and Technology, 7 (22). pp. 4720-4722. ISSN 2040-7459. (Published)

Fadzil, Mat Yahaya and Namdar, Abdoullah (2014) Recent Advances on Study of Liquefaction and Time to Failure of Sandy Subsoil. The Electronic Journal of Geotechnical Engineering (EJGE), 19. pp. 1501-1517. ISSN 1089-3032. (Published)

Fadzil, Mat Yahaya and Akbari, Abolghasem and Azamirad, Mahmoud and Fanodi, Mohsen (2014) Landslide Susceptibility Mapping Using Logistic Regression Analysis and GIS Tools. The Electronic Journal of Geotechnical Engineering (EJGE), 19. pp. 1687-1696. ISSN 1089-3032. (Published)

Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Mohd Warid, Hussin (2015) Effect of Curing Regime on Compressive Strength of Aerated Concrete Containing Palm Oil Fuel Ash as Partial Sand Replacement. Concrete Research Letters, 6 (2). pp. 54-59. ISSN 2180-1371. (Published)

Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Mohd Warid, Hussin (2016) Long Term Investigation on Sulphate Resistance of Aerated Concrete Containing Palm Oil Fuel Ash. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2406-2411. ISSN 1819-6608. (Published)

Faeeza, Abdul Halim and Firdaus, Basrawi and Ahmad Syazwan, Ramli and Oumer, A. N. and Nurul Aini, Mohd Azman (2022) Effect of surface roughness and temperature on the performance of low-temperature vacuum drying with induced nucleation boiling method in dewatering stingless bees honey. Drying Technology. pp. 1-13. ISSN 0737-3937. (In Press / Online First) (In Press / Online First)

Faezah, Isa and Haslinda, Zabiri and Noorlisa, Harun and Azmi, Mohammad Shariff (2022) CO2 Removal via an environmental green solvent, K2CO3-Glycine (PCGLY ) : Investigative analysis of a dynamic and control study. ACS Omega, 7 (22). pp. 18213-18228. ISSN 2470-1343. (Published)

Fahim, Fayaz and He, Chao and Goel, Avishek and Rintala, Jukka and Konttinen, Jukka (2023) Oxidative ethanol dry reforming for production of syngas over Co-based catalyst : Effect of reaction temperature. Materials Today Communications, 35 (105671). pp. 1-7. ISSN 2352-4928. (Published)

Fakir, Md Moslemuddin and Sabira, Khatun (2017) A numerical approach for efficiency analysis of heat distribution through fin. International Review of Aerospace Engineering, 10 (6). pp. 337-344. ISSN 1973-7459. (Published)

Farah, Amalina and Abdul Syukor, Abd Razak and Santhana, Krishnan and A. W., Zularisam and Mohd, Nasrullah (2022) A review of eco-sustainable techniques for the removal of Rhodamine B dye utilizing biomass residue adsorbents. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103267). ISSN 1474-7065. (Published)

Farah, Amalina and Abdul Syukor, Abd Razak and Santhana, Krishnan and Haspina, Sulaiman and A. W., Zularisam and Mohd, Nasrullah (2022) Advanced techniques in the production of biochar from lignocellulosic biomass and environmental applications. Cleaner Materials, 6 (100137). ISSN 2772-3976. (Published)

Farah, Amalina and Abdul Syukor, Abd Razak and Santhana, Krishnan and Haspina, Sulaiman and A. W., Zularisam and Mohd, Nasrullah (2022) Biochar production techniques utilizing biomass waste-derived materials and environmental applications – A review. Journal of Hazardous Materials Advances, 7 (100134). ISSN 2772-4166. (Published)

Farah, Amalina and Santhana, Krishnan and A. W., Zularisam and Mohd, Nasrullah (2023) Biochar and sustainable environmental development towards adsorptive removal of pollutants: Modern advancements and future insight. Process Safety And Environmental Protection, 173. pp. 715-728. ISSN 0957-5820. (Published)

Farah Amalina, . and Abdul Syukor, Abd Razak and Zularisam, Abdul Wahid and Mohd Aizudin, Abd Aziz and Krishnan, Santhana and Mohd Nasrullah, Zulkifli (2023) Comprehensive assessment of biochar integration in agricultural soil conditioning: Advantages, drawbacks, and future prospects. Physics and Chemistry of the Earth, Parts A/B/C, 132 (103508). pp. 1-13. ISSN 1474-7065. (Published)

Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Krishnan, Santhana and Sulaiman, Haspina and Zularisam, Abdul Wahid and Mohd Nasrullah, Zulkifli (2022) Advanced techniques in the production of biochar from lignocellulosic biomass and environmental applications. Cleaner Materials, 6 (100137). pp. 1-17. ISSN 2772-3976. (Published)

Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Krishnan, Santhana and Zularisam, Abdul Wahid and Mohd, Nasrullah (2022) Dyes removal from textile wastewater by agricultural waste as an absorbent – A review. Cleaner Waste Systems, 3 (100051). pp. 1-15. ISSN 2772-9125. (Published)

Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Krishnan, Santhana and Zularisam, Abdul Wahid and Mohd, Nasrullah (2022) The effects of chemical modification on adsorbent performance on water and wastewater treatment - A review. Bioresource Technology Reports, 20 (101259). pp. 1-12. ISSN 2589-014X. (Published)

Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Krishnan, Santhana and Zularisam, Abdul Wahid and Mohd, Nasrullah (2023) The synthesization of activated carbon from electrocoagulated palm oil mill effluent sludge for wastewater treatment. Materials Today: Proceedings. pp. 1-9. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Farah Amalina, Ishak and Krishnan, Santhana and Zularisam, Abdul Wahid and Mohd, Nasrullah (2024) Pristine and modified biochar applications as multifunctional component towards sustainable future : Recent advances and new insights. Science of The Total Environment, 914 (169608). pp. 1-22. ISSN 0048-9697. (Published)

Farah Amalina, Ishak and Krishnan, Santhana and Zularisam, Abdul Wahid and Mohd Nasrullah, Zulkifli (2023) Recent advancement and applications of biochar technology as a multifunctional component towards sustainable environment. Environmental Development, 46 (100819). pp. 1-17. ISSN 2211-4645. (Published)

Farah Nur Arina, Baharudin and Nor Azlina, Ab. Aziz and Mohamad Razwan, Abdul Malek and Anith Khairunnisa, Ghazali and Zuwairie, Ibrahim (2022) Indoor comfort and energy consumption optimization using an inertia weight artificial bee colony algorithm. Algorithms, 15 (395). pp. 1-21. ISSN 1999-4893. (Published)

Farah Salwati, Ibrahim and Muneera, Esa and Abdul Rahimi, Abdul Rahman (2021) The adoption of IOT in the Malaysian construction industry: Towards construction 4.0. International Journal of Sustainable Construction Engineering and Technology, 12 (1). pp. 56-67. ISSN 2180-3242. (Published)

Farah Salwati, Ibrahim and Nur Diyana, Shariff and Muneera, Isa and Abdul Rahimi, Abdul Rahman (2019) The barriers factors and driving forces for BIM implementation in Malaysian AEC companies. Journal of Advanced Research in Dynamical and Control Systems, 11 (8 special). pp. 275-281. ISSN 1943-023X. (Published)

Faraj, Moneer A. and Abdalla, Ahmed N. and Fahmi, Samsuri and Damhuji, Rifai and Kharudin, Ali (2017) Investigate of the Effect of Width Defect on Eddy Current Testing Signals Under Different Materials. Indian Journal of Science and Technology, 10 (2). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Farhana, Kaniz and Kadirgama, Kumaran and Faisal Mahamude, Abu Shadate and Jose, Rajan (2024) Review of MXenes as a component in smart textiles and an adsorbent for textile wastewater remediation. Chinese Chemical Letters, 35 (108533). pp. 1-15. ISSN 1001-8417 (print); 1878-5964 (online). (Published)

Farouk, A M and Romali, N S and Rahman, R A and M A, Seman (2019) Optimization techniques for rehabilitating water distribution networks. International Conference of Sustainable Earth Resources Engineering 2020, 641 (1). 012-019. ISSN 10.1088. (Published)

Farouk, Abdelrahman M. and Rahimi, A. Rahman and Noor Suraya, Romali (2021) Non-revenue water reduction strategies: a systematic review. Smart and Sustainable Built Environment, ahead-of-pri. pp. 1-19. ISSN 2046-6099. (Published)

Fatanah, M. Suhaimi and Chase, J. Geoffrey and Pretty, Christopher G. and Shaw, Geoffrey M. and Normy Norfiza, A. Razak and Ummu Kulthum, Jamaludin (2017) Insulin Sensitivity and Sepsis Score: A Correlation between Model-based Metric and Sepsis Scoring System in Critically Ill Patients. Biomedical Signal Processing and Control, 32. pp. 112-123. ISSN 1746-8094. (Published)

Fauzi, Baharudin and Nur Fatt-Hiyyah, Mohd Adlan and Jalina, Kassim and Nurhidayah, Hamzah and Suriati, Ghazali (2023) Effect of heating, ventilation, and air conditioning (HVAC) system on indoor air quality in a medical facility. Journal of Sustainable Civil Engineering and Technology (JSCET), 2 (2). pp. 80-90. ISSN 2948-4294. (Published)

Fayaz, Fahim and Ahmad Ziad, Sulaiman and Singh, Sharanjit and Akbari, Sweeta (2018) Effect of co2 partial pressure on dry reforming of ethanol for hydrogen production. International Journal of Innovative Research and Scientific Studies, 1 (1). pp. 6-10. ISSN 2617-6548. (Published)

Fayaz, Fahim and Herma Dina, Setiabudi and Nguyen Vo, Dai-Viet and Nguyen Thi, Anh Nga and Thong Lee, Minh Pham and Huong Thi, Danh and Bawadi, Abdullah (2018) Hydrogen production form ethanol dry reforming over lanthania-promoted Co/Al2O3 catalyst. IIUM Engineering Journal, 19 (1). pp. 24-33. ISSN 1511-788X. (Published)

Fazilah, Abdul Aziz and Nur Aqila, Nor Azmi (2022) The impact of risk factors associated with long-term computer use on musculoskeletal discomfort among administrative staff: A case study. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 7-17. ISSN 2636-9575. (Published)

Feizollah, Ali and Nor Badrul, Anuar and Mehdi, Riyadh and Ahmad Firdaus, Zainal Abidin and Ainin, Sulaiman (2022) Understanding COVID-19 halal vaccination discourse on facebook and twitter using aspect-based sentiment analysis and text emotion analysis. International Journal of Environmental Research and Public Health, 19 (10). pp. 1-17. ISSN 1661-7827. (Published)

Felayati, Frengki Mohamad and Semin, . and Cahyono, Beny and Rosli, Abu Bakar and Birouk, Madjid (2021) Performance and emissions of natural gas/diesel dual-fuel engine at low load conditions: Effect of natural gas split injection strategy. Fuel Processing Technology, 300 (121012). pp. 1-12. ISSN 0378-3820. (Published)

Feng, Shangsu and A., Zulkiple (2013) The Application of Energy Saving Technology in High Rise Building a Lanzhou. Procedia Civil Engineering. pp. 1-4. (Published)

Feng, Tan wei and Raihana Zahirah, Edros and Ngahzaifa, Ab Ghani and Siti Umairah, Mokhtar and Dong, Ruihai (2024) Prediction of blood-brain barrier permeability of compounds by machine learning algorithms. Journal of Advanced Research in Applied Sciences and Engineering Technology, 33 (2). pp. 269-276. ISSN 2462-1943. (Published)

Feng, Weiying and Deng, Yuxin and Yang, Fang and Miao, Qing Feng and Ngien, Su Kong (2023) Systematic review of contaminants of emerging concern (CECs): Distribution, risks, and implications for water quality and health. Water (Switzerland), 15 (3922). pp. 1-16. ISSN 2073-4441. (Published)

Fengrong, Han and Izzeldin Ibrahim, Mohamed Abdelaziz and Xinni, Liu and Kamarul Hawari, Ghazali and Wang, Hao (2020) A survey on DV-Hop localization techniques in Three-dimensional wireless sensor networks. International Journal of Online and Biomedical Engineering (iJOE), 16 (10). pp. 24-38. ISSN 2626-8493. (Published)

Ferdaus, R. and K. A., Masri and Putra Jaya, Ramadhansyah and Md. Shahnewaz, Shoaib (2023) Rheological and mechanical properties of hot mix asphalt incorporating polypropylene and polyethylene fibers. Construction Technologies and Architecture, 4. pp. 115-123. ISSN 2674-1237. (Published)

Fikri Hakim, Zainudin and Muhammad Shafiq, Zulkifli and Anisah Sajidah, Haji Saud and Salim, Nurjannah and Hanafi, Ani and Anwaruddin, Hisyam and Edy Sutjipto, Agus Geter and Mohd Hasbi, Ab Rahim (2023) Formulation of Malaysian clay into inert ceramic balls : Effect of sintering temperature. Materials Today: Proceedings, 75. pp. 197-201. ISSN 2214-7853. (Published)

Firdaus, Ismail and Abdul Syukor, Abd Razak and Ali Zainal-Abidin, Mohamad Termizi and Muhammad Amirul Syafiq, Nasarudin and Suryati, Sulaiman (2024) The performance of pistia stratiotes and eichornia crassipes for the heavy metal removal during backwash water from WASRA system. Construction, 4 (2). pp. 156-164. ISSN 2785-8731. (Published)

Firdaus Shazriq, Mohd Fadzil and Nur Izzati Khoirunnisa, Ismail and Nurrina, Rosli (2018) Study on the effects of nozzle distance to surface roughness of workpiece under minimum quantity lubricant (MQL) milling process. Journal of Modern Manufacturing Systems and Technology, 1. pp. 76-81. ISSN 2636-9575. (Published)

Firmansyah, Rachman and Tamalkhani, Syammaun and Putra Jaya, Ramadhansyah and R., Akmal (2023) The effect of faunus ater shell as filler in asphalt concrete wearing course (AC-WC) mixtures. AIP Conference Proceedings, 2702 (1). pp. 1-7. ISSN 0094-243X. (Published)

Fitriady, Muhammad Arifuddin and Nurizzatul Atikha, Rahmat and Ahmad Faiz, Mohammad (2023) Vertical and spanwise wake flow structures of a single spire over smooth wall surface in a wind tunnel. Journal of Applied Fluid Mechanics, 16 (12). pp. 2459-2470. ISSN 1735-3572. (Published)

Fitriyana, Deni Fajar and Anis, Samsudin and Al Qudus, Abdul Rachman and Lakuy, Mirza Aufa Nugraha and Ismail, Rifky and Nugroho, Sri and Haryadi, Gunawan Dwi and Bayuseno, Athanasius Priharyoto and Siregar, Januar Parlaungan (2022) The effect of post-heat treatment on the mechanical properties of FeCrBMnSi coatings prepared by twin wire arc spraying (TWAS) method on pump impeller from 304 stainless steel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (2). pp. 138-147. ISSN 2289-7879. (Published)

Fitriyana, Deni Fajar and Doni Widodo, Rahmat and Kriswanto, Kriswanto and Athoillah, Ahmad and Prasetyo, Ares Yudi and Alrasyid, Mochamad Dzaki and Aripin, Muhammad Bustanul and Dimyati, Saeful and Irawan, Agustinus Purna and Cionita, Tezara and Siregar, Januar Parlaungan and Ismail, Rifky and Bayuseno, Athanasius Priharyoto (2022) Addition Rice Husk on the Density and Impact Strength of Non-Asbestos Brake Pad Composites Prepared by The Hand Layup Method. Jurnal Penerapan Teknologi dan Pembelajaran, 20 (1). pp. 20-28. ISSN 2527-6964. (Published)

Fitriyana, Deni Fajar and Irawan, Agustinus Purna and Bahatmaka, Aldias and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Muhamadin, Rilo Chandra and Cionita, Tezara and Siregar, Januar Parlaungan and Jehadus, Emilianus and Baskara, Gregorius Dimas and Laksmidewi, Dwinita and da Silva Guterres, Natalino Fonseca (2023) The effect of temperature on the hydrothermal synthesis of carbonated apatite from calcium carbonate obtained from green mussels shells. ARPN Journal of Engineering and Applied Sciences, 18 (11). pp. 1215-1224. ISSN 1819-6608. (Published)

Foo, Sheng Tong and Chin, Siew Choo and Doh, Shu Ing and Jolius, Gimbun (2017) Natural Fiber Composites as Potential External Strengthening Material – A Review. Indian Journal of Science and Technology, 10 (2). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Francis, Angel and Ramyashree, M. S. and Shanmuga Priya, S. and Kumar, Surendra Harish and Sudhakar, Kumarasamy and Fan, Wei Keen and Tahir, Muhammad (2022) Carbon dioxide hydrogenation to methanol : Process simulation and optimization studies. International Journal of Hydrogen Energy, 47 (86). pp. 36418-36432. ISSN 0360-3199. (Published)

Fukuoka, Yasuhiro and Komatsu, Ryunosuke and Machii, Kenta and Yokota, Masaaki and Tobe, Masaki and Ahmad Najmuddin, Ibrahim and Fukui, Takahiro and Habu, Yasushi (2022) Pace running of a quadruped robot driven by pneumatic muscle actuators : An experimental study. Applied Sciences (Switzerland), 12 (9). pp. 1-17. ISSN 2076-3417. (Published)

Fukuoka, Yasuhiro and Oshino, Kazuyuki and Ahmad Najmuddin, Ibrahim (2022) Negotiating uneven terrain by a simple teleoperated tracked vehicle with internally movable center of gravity. Applied Sciences (Switzerland), 12 (1). pp. 1-16. ISSN 2076-3417. (Published)

Futane, Abhishek and Jadhav, Pramod and Mustafa, Abu Hasnat and Srinivasan, Arthi and Narayanamurthy, Vigneswaran (2024) Aptamer‑functionalized MOFs and AI‑driven strategies for early cancer diagnosis and therapeutics. Biotechnology Letters, 46 (1). pp. 1-17. ISSN 0141-5492. (Published)

Futane, Abhishek and Narayanamurthy, Vigneswaran and Jadhav, Pramod and Srinivasan, Arthi (2023) Aptamer-based rapid diagnosis for point-of-care application. Microfluidics and Nanofluidics, 27 (15). pp. 1-33. ISSN 1613-4982. (Published)

G., Danoshini and A., Baqadeem and A. K. S., Al-Shakhrit and N. E., Jasni and Khairil Azman, Masri (2021) Statistical Analysis of Stone Mastic Asphalt Incorporating Kenaf Fibre. Construction, 1 (1). pp. 12-17. ISSN 2785-8731. (Published)

Gani, Asri and Erdiwansyah, E. and Desvita, Hera and Munawar, Edi and Rizalman, Mamat and Nizar, Muhammad Afdi and Darnas, Yeggi and Sardjono, Ratnaningsih Eko (2024) Comparative analysis of HHV and LHV values of biocoke fuel from palm oil mill solid waste. Case Studies in Chemical and Environmental Engineering, 9 (100581). pp. 1-7. ISSN 2666-0164. (Published)

Gani, Asri and Erdiwansyah, E. and Munawar, Edi and Mahidin, M. and Rizalman, Mamat and S. M., Rosdi (2023) Investigation of the potential biomass waste source for biocoke production in Indonesia : A review. Energy Reports, 10. pp. 2417-2438. ISSN 2352-4847. (Published)

Gani, Asri and Erdiwansyah, Erdiwansyah and Sardjono, Ratnaningsih Eko and Mariana, Mariana and Rizalman, Mamat (2022) Comparison of remaining coal-burning ash-based on cd, pb, and hg concentration at different temperatures : A case study in aceh province. Journal of Environmental Engineering and Landscape Management, 30 (3). pp. 342-349. ISSN 1648-6897. (Published)

Gbonhinbor, Jeffrey Randy and Yelebe, Zekieni Robert and Obuebite, Ann A. and Agi, Augustine Aja (2023) Variations in formation resistivity and geometric tortuosity factors for consolidated niger delta formations. Natural Resources Research, 32 (3). pp. 1093-1109. ISSN 1520-7439. (Published)

Ghadami, Abbas and Ghamari, Ali and Putra Jaya, Ramadhansyah (2024) Improving the behavior of the CBF system using an innovative box section damper: Experimental and numerical study. Structures, 62 (106210). pp. 1-13. ISSN 2352-0124. (Published)

Ghamari, Ali and Seong-Hoon, Jeong and Thongchom, Chanachai and Putra Jaya, Ramadhansyah (2023) An innovative shear links as dampers compound of shear plates and round HSS sections. Journal of Materials Research and Technology. pp. 1-16. ISSN 2238-7854. (Published)

Ghazirah, Mustapha and Wan Ruzaini, Wan Sulaiman and Anwar, P. P. Abdul Majeed and Nur Hayati, Mohd Yahya and Jamaluddin, Mahmud (2014) Kinematics and Efficacy Analysis of the Seni Silat Cekak Malaysia (Kaedah A). Applied Mechanics and Materials, 680. pp. 267-270. ISSN 1662-7482. (Published)

Ghiasi, Pedram and Najafi, Gholamhassan and Ghobadian, Barat and Jafari, Ali and Rizalman, Mamat and Mohd Fairusham, Ghazali (2023) CFD-study of the H-Rotor Darrius wind turbine performance in drag-lift and lift regime : Impact of type, thickness and chord length of blades. Alexandria Engineering Journal, 67. pp. 51-64. ISSN 1110-0168. (Published)

Ghiasi, Pedram and Salehi, Amar and Hoseini, S. S. and Najafi, G. and R., Mamat and Balkhaya, . and Fitri, Khoerunnisa (2020) Investigation of the effect of flow rate on fluid heat transfer in counter-flow helical heat exchanger using CFD method. CFD Letters, 12 (3). pp. 98-111. ISSN 2180-1363. (Published)

Gholipour, Amir and Akbari, Abolghasem (2015) Sensitivity Analysis of Wastewater Flow Quality in A Channel Under The Influence of Hydraulic Retention Time Variations. International Journal of Civil Engineering and Geo-Environmental, 6 (1). pp. 1-5. ISSN 2180-2742. (Published)

Ghosh, P. and Kumar, M. and Kapoor, R. and Kumar, S. S. and Singh, Lakhveer and Vijay, V. and Vijay, V. K. and Kumar, V. and Thakur, I. S. (2020) Enhanced biogas production from municipal solid waste via co-digestion with sewage sludge and metabolic pathway analysis. Bioresource Technology, 296. pp. 1-2. ISSN 0960-8524. (Published)

Giacomo, Francesco Di and Azhar, Fakharuddin and Rajan, Jose and Brown, Thomas M. (2016) Progress, Challenges and Perspectives in Flexible Perovskite Solar Cells. Energy and Environmental Science, 9. pp. 3007-3035. ISSN 1754-5692 (Print); 1754-5706 (Online). (Published)

Giahi, Masoud and Pathania, Deepak and Agarwal, Shilpi and Ali, Gomaa A. M. and K. F., Chong and Gupta, Vinod Kumar (2019) Preparation of Mg-doped TiO2 nanoparticles for photocatalytic degradation of some organic pollutants. Studia Universitatis Babes-Bolyai, Chemia, 64 (1). pp. 7-18. ISSN 1224-7154. (Published)

Gisen, J. I. A. and Savenije, H. H. G. (2015) Estimating Bankfull Discharge and Depth in Ungauged Estuaries. Water Resources Research, 51 (4). pp. 2298-2316. ISSN 1944-7973. (Published)

Gisen, J. I. A. and Savenije, H. H. G. and Nijzink, R. C. (2015) Revised Predictive Equations for Salt Intrusion Modelling in Estuaries. Hydrology and Earth System Sciences, 19. pp. 2791-2830. ISSN 1027-5606. (Published)

Goel, Varun and Dwivedi, Ankur and Kumar, Rajat and Kumar, Reji Rajamony and Pandey, Adarsh Kumar and Chopra, Kapil and Tyagi, Vineet Veer (2023) PCM-assisted energy storage systems for solar-thermal applications: Review of the associated problems and their mitigation strategies. Journal of Energy Storage, 69 (107912). pp. 1-30. ISSN 2352-152X. (Published)

Goh, H.C. and Putra Jaya, Ramadhansyah (2022) The influence of eggshell powder as additive on the physical and mechanical properties of stone mastic asphalt. Construction, 2 (1). pp. 79-87. ISSN 2785-8731. (Published)

Goh, Pei Sean and Lau, Woei Jye and Ahmad Fauzi, Ismail and Samawati, Zahra and Liang, Yong Yeow and Kanakaraju, Devagi (2023) Microalgae-enabled wastewater treatment : A sustainable strategy for bioremediation of pesticides. Water (Switzerland), 15 (70). pp. 1-21. ISSN 2073-4441. (Published)

Goh, Pei Sean and Noor Azlinda, Ahmad and Lim, Junwei and Liang, Yong Yeow and Kang, Hooi Siang and Ahmad Fauzi, Ismail and Arthanareeswaran, Gangasalam (2022) Microalgae-enabled wastewater remediation and nutrient recovery through membrane photobioreactors : Recent achievements and future perspective. Membranes, 12 (11). pp. 1-25. ISSN 2077-0375. (Published)

Gopi, Ajith and Sharma, Prabhakar and Sudhakar, Kumarasamy and Ngui, Wai Keng and Kirpichnikova, Irina and Cuce, Erdem (2023) Weather impact on solar farm Performance : A comparative analysis of machine learning techniques. Sustainability (Switzerland), 15 (439). pp. 1-28. ISSN 2071-1050. (Published)

Gu, Hongyan and Liang, Huimin and Tong, Guoyun and Liu, Fang and Liu, Yu and Liu, Xing and Jia, Zhen and Paul, John (2021) Research on vibration mechanism and control technology of building structure under earthquake action. Journal of Vibroengineering, 23 (6). pp. 1395-1406. ISSN 1392-8716. (Published)

Gul, Yasmeen and Sultan, Zahid and Jokhio, Gul Ahmed (2018) The association between the perception of crime and walking in gated and non-gated neighbourhoods of Asian developing countries. Heliyon, 4 (8). pp. 1-15. ISSN 2405-8440. (Published)

Gul, Yasmeen and Sultan, Zahid and Moeinaddini, Mehdi and Jokhio, Gul A. (2018) The effects of physical activity facilities on vigorous physical activity in gated and non-gated neighborhoods. Land Use Policy, 77. pp. 155-162. ISSN 0264-8377. (Published)

Gul, Yasmeen and Zahid, Sultan and Moeinaddini, Mehdi and Jokhio, Gul A. (2018) Measuring the differences of neighbourhood environment and physical activity in gated and non-gated neighbourhoods in Karachi, Pakistan. Journal of Urban Design. pp. 1-20. ISSN 1357-4809. (In Press / Online First) (In Press / Online First)

Gupta, Ritu and Noraziah, Ahmad and Gupta, Arun and Ainul Azila, Che Fauzi (2017) Challenges in predicting wood plastic composites (WPCs). Advanced Science Letters, 23 (11). pp. 11035-11039. ISSN 1936-6612. (Published)

H. A., Roslan and M. I., Adiyanto and S. A. H. S., Mustapa and T. A., Majid and N. S. H., Harith (2019) Increment of Steel Tonnage for Reinforced Concrete School Building Considering Seismic Design. International Journal of Recent Technology and Engineering, 8 (3S3). pp. 351-355. ISSN 2277-3878. (Published)

H. M., Hamada and A. A., Alattar and F. M., Yahaya and K., Muthusamy and Tayeh, Bassam A. (2021) Mechanical properties of semi-lightweight concrete containing nano-palm oil clinker powder. Physics and Chemistry of the Earth, Parts A/B/C, 121 (102977). pp. 1-6. ISSN 1474-7065. (Published)

H. Mohd, Hanafi and Khairunisa, Muthusamy and Wan Ahmad, Saffuan and Budiea, Ahmed Mokhtar Albshir and Kusbiantoro, Andri and Nabilla, Mohamad and Rafiza, Abdul Rahman and Błoch, Katarzyna (2024) Mechanical properties of lightweight aggregate concrete containing unground palm oil fuel ash as partial sand replacement. Archives of Metallurgy and Materials, 69 (1). pp. 297-301. ISSN 1733-3490. (Published)

H. O., Salah and I. M., Sujaul and Karim, Md Abdul and Mohd Hafeez, Mohd Nasir and Abdalmnam, A. and C. K. M., Faizal (2020) An Investigation of Tap Water Quality in Kuantan, Pahang, Malaysia. Bangladesh Journal of Botany, 49 (1). pp. 191-196. ISSN 0253-5416 (print); 2079-9926 (online). (Published)

H. Sovester, H and M. I., Adiyanto (2017) Seismic Performance Of Reinforced Concrete School Buildings In Sabah. International Journal of Civil Engineering and Geo-Environmental, Sp. (NCWE). pp. 148-152. ISSN 2180-2742. (Published)

Habib, M. A. a and Raja-Yusof, R. -J. and Salim, S. S.a and Sani, A. A. a and Sofian, H. and Abu Bakar, A. (2021) Analyzing students’ experience in programming with computational thinking through competitive, physical, and tactile games: The quadrilateral method approach. Turkish Journal of Electrical Engineering and Computer Sciences, 25 (9). pp. 2280-2297. ISSN 1300-0632. (Published)

Hadhirra Nurdiana, Abdul Hamid and Noor Suraya, Romali and Rahimi, A. Rahman (2023) Key Barriers and Feasibility of Implementing Green Roofs on Buildings in Malaysia. Buildings, 13 (9). pp. 1-16. ISSN 2075-5309. (Published)

Hadi, Agung Efriyo and Siregar, Januar Parlaungan and Cionita, Tezara and Norlaila, Mohd Bakeri and Muhammad Amin, Mohd Badari and Irawan, Agustinus Purna and Jamiluddin, Jaafar and Rihayat, Teuku and Ramli, Junid and Fitriyana, Deni Fajar (2022) Potentiality of utilizing woven pineapple leaf fibre for polymer composites. Polymers, 14 (13). pp. 1-11. ISSN 2073-4360. (Published)

Hadi, Arkan J. and AbdulKadir, H. K. and Hadi, Ghassan J. and Kamal, Yusoh and Hasany, S. F. (2018) Mechanical and thermal properties of the waste low and high density polyethylene-nanoclay composites. Oriental Journal of Chemistry, 34 (2). pp. 1069-1077. ISSN 0970-020X. (Published)

Hafizi, Z. M. and Ibrahim, I. N, and Vorathin, E. (2023) Delamination detection in thin-walled composite structures using acoustic pitch-catch technique with Fiber Bragg Grating Sensors. Jurnal Teknologi (Sciences & Engineering), 85 (3). pp. 35-42. ISSN 2180–3722. (Published)

Hai, Tao and Bhuiyan, Md Zakirul Alam and Wang, Jing and Wang, Tian and Hsu, D. Frank and Li, Yafeng and Salih, Sinan Q. and Wu, Jie and Liu, Penghui (2020) DependData: data collection dependability through three-layer decision-making in BSNs for healthcare monitoring. Information Fusion, 62. pp. 32-46. ISSN 1566-2535. (Published)

Hamada, Hussein M. and Ahmad Tarmizi, Haron and Zahrizan, Zakaria and Humada, Ali Mahmood (2017) Implementation of 4D/BIM in the Iraqi construction industry. International Journal of Engineering Systems Modelling and Simulation, 9 (4). pp. 227-236. ISSN 1755-9758. (Published)

Hamada, Hussein M. and Al-attar, Alya’a A. and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Tayeh, Bassam A. and Humada, Ali M. (2020) Effect of high-volume ultrafine palm oil fuel ash on the engineering and transport properties of concrete. Case Studies in Construction Materials, 12 (e00318). pp. 1-12. ISSN 2214-5095. (Published)

Hamada, Hussein M. and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Jokhio, Gul A. and Humada, Ali M. (2019) Fresh and hardened properties of palm oil clinker lightweight aggregate concrete incorporating Nano-palm oil fuel ash. Construction and Building Materials, 214. pp. 344-354. ISSN 0950-0618. (Published)

Hamada, Hussein M. and Jokhio, Gul A. and Al Attar, A.A. and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Humada, Ali Mahmood and Gul, Yasmeen (2020) The use of palm oil clinker as a sustainable construction material: A review. Cement and Concrete Composites, 106 (103447). (Published)

Hamada, Hussein M. and Tayeh, Bassam A. and Al-Attar, Alyaa A. and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Humada, Ali Mahmood (2020) The present state of the use of eggshell powder in concrete: a review. Journal of Building Engineering, 32 (101583). pp. 1-36. ISSN 2352-7102. (In Press / Online First) (In Press / Online First)

Hamada, Hussein M. and Tayeh, Bassam A. and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Al-Attar, Alyaa A. (2020) Effects of nano-palm oil fuel ash and nano-eggshell powder on concrete. Construction and Building Materials, 261 (119790). pp. 1-11. ISSN 0950-0618. (Published)

Hamada, Hussein M. and Tayeh, Bassam A. and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Al-Attar, Alyaa A. (2020) Effects of nano-palm oil fuel ash and nano-eggshell powder on concrete. Construction and Building Materials, 261 (119790). pp. 1-11. ISSN 0950-0618. (Published)

Hamada, Hussein M. and Thomas, Blessen Skariah and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Yang, Jian and Abdalla, Jamal A. and Hawileh, Rami A. (2021) Sustainable use of palm oil fuel ash as a supplementary cementitious material: A comprehensive review. Journal of Building Engineering, 40 (102286). pp. 1-14. ISSN 2352-7102. (Published)

Hamada, Hussein M. and Thomas, Blessen Skariah and Tayeh, Bassam A. and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Yang, Jian (2020) Use of oil palm shell as an aggregate in cement concrete: a review. Construction and Building Materials, 265 (120357). pp. 1-16. ISSN 0950-0618. (Published)

Hamada, Hussein Mahmood and Abdulhaleem, Khamees N. and Majdi, Ali and Al Jawahery, Mohammed S. and Thomas, Blessen Skariah and Yousif, Salim T. (2023) Effect of wastewater as sustainable concrete material on concrete performance : A critical review. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Hamada, Hussein Mahmood and Abdulhaleem, Khamees N. and Majdi, Ali and Al Jawahery, Mohammed S. and Thomas, Blessen Skariah and Yousif, Salim T. (2023) The durability of concrete produced from pozzolan materials as a partially cement replacement : A comprehensive review. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Hamada, Hussein Mahmood and Abed, Farid and Alattar, Alyaa and Fadzil, Mat Yahaya and Tayeh, Bassam A. and Aisheh, Yazan I.Abu (2023) Influence of palm oil fuel ash on the high strength and ultra-high performance concrete : A comprehensive review. Engineering Science and Technology, an International Journal, 45 (101492). pp. 1-10. ISSN 2215-0986. (Published)

Hamada, Hussein Mahmood and Al-Attar, Alyaa A. and Tayeh, Bassam and Fadzil, Mat Yahaya (2022) Optimizing the concrete strength of lightweight concrete containing nano palm oil fuel ash and palm oil clinker using response surface method. Case Studies in Construction Materials, 16 (e01061). pp. 1-22. ISSN 2214-5095. (Published)

Hamada, Hussein Mahmood and Alattar, Alyaa and Tayeh, Bassam and Fadzil, Yahaya and Adesina, Adeyemi (2022) Sustainable application of coal bottom ash as fine aggregates in concrete: A comprehensive review. Case Studies in Construction Materials, 16 (e01109). pp. 1-17. ISSN 2214-5095. (Published)

Hamada, Hussein Mahmood and Alattar, Alyaa and Tayeh, Bassam A. and Fadzil, Mat Yahaya and Almeshal, Ibrahim (2022) Influence of different curing methods on the compressive strength of ultra-high-performance concrete : A comprehensive review. Case Studies in Construction Materials, 17 (e01390). pp. 1-16. ISSN 2214-5095. (Published)

Hamada, Hussein Mahmood and Alattar, Alyaa and Tayeh, Bassam A. and Fadzil, Mat Yahaya and Skariah Thomas, Blessen (2022) Effect of recycled waste glass on the properties of high-performance concrete : A critical review. Case Studies in Construction Materials, 17 (e01149). pp. 1-18. ISSN 2214-5095. (Published)

Hamada, Hussein Mahmood and Attar, Alyaa and Shi, Jinyan and Fadzil, Mat Yahaya and Al Jawahery, Mohammed and Yousif, Salim (2023) Optimization of sustainable concrete characteristics incorporating palm oil clinker and nano-palm oil fuel ash using response surface methodology. Powder Technology, 413 (118054). pp. 1-12. ISSN 0032-5910. (Published)

Hamidah, Abdullah and Khan, Maksudur R. and Huei, Ruey Ong and Zahira, Yaakob (2017) Modified TiO2 Photocatalyst for CO2 Photocatalytic Reduction: An overview. Journal of CO2 Utilization, 22. pp. 15-32. ISSN 2212-9820. (Published)

Hamisa, Abdul Hamid and Wan Hamzah, Wan Azmi and Mohd Farid, Ismail and Rosminazuin, Ab Rahim and Ali, Hafiz Muhammad (2023) Tribology performance of polyol-ester based TiO2, SiO2 and their hybrid nanolubricants. Lubricants, 11 (18). pp. 1-20. ISSN 2075-4442 (Online). (Published)

Hamzah, Ahmad and Nur Aqilah, Othman (2015) The Impact of Cross-Correlation on Mobile Robot Localization. International Journal of Control, Automation and Systems, 13 (5). pp. 1251-1261. ISSN 1598-6446. (Published)

Han, Fengrong and Izzeldin, Ibrahim Mohamed Abdelaziz and Kamarul Hawari, Ghazali and Zhao, Yue and Li, Ning and UNSPECIFIED (2023) Optimized range-free localization scheme using autonomous groups particles swarm optimization for anisotropic wireless sensor networks. IEEE Access, 11. pp. 26906-26920. ISSN 2169-3536. (Published)

Hanis Athirah, Roslan and Nur Shairah, Zulkhibri and Faisal, Ade and Mohd Irwan, Adiyanto (2023) Cost estimation of structural work for residential building with seismic design consideration. International Journal of Integrated Engineering, 15 (2). pp. 263-272. ISSN 2229-838X. (Published)

Hanis Hazirah, Arifin and Libriati, Zardasti and Nordin, Yahaya and Lim, Kar Sing and Nur Hafizah, Abd Khalid and Siti Asma, Abd Latif and Norhazilan, Md Noor (2022) Effect of multi-walled carbon nanotubes on infill material for pipeline composite repair. International Journal of Integrated Engineering, 14 (1). pp. 313-321. ISSN 2229-838X. (Published)

Hanis Hazirah, Arifin and Norhazilan, Md Noor and Nordin, Yahya and Lim, Kar Sing and Mohamad Shazwan, Ahmad Shah and Sarehati, Umar and Kim, Jang Ho Jay (2024) Influence of defect geometry on putty performance in pipeline composite repair assessments. International Journal of Pressure Vessels and Piping, 209 (105190). pp. 1-18. ISSN 0308-0161. (Published)

Hanis Hazirah, Arifin and Nurfarahin, Zainal and Libriati, Zardasti and Nordin, Yahaya and Lim, Kar Sing and Norhazilan, Md Noor (2019) Mechanical properties of carbon nanotubes-modified epoxy grout for pipeline repair system. Jurnal Teknologi (Sciences & Engineering), 81 (3). pp. 169-177. ISSN 2180–3722. (Published)

Hanis Nadiah, Ruslan and Khairunisa, Muthusamy and Fadzil, Mat Yahaya and Muhammad Ashraf, Fauzi and Ismail, Mohamed A. and Zuraina, Ali (2024) Review on performance of self compacting concrete containing solid waste and bibliometric properties: A review. Journal of Building Engineering, 86 (108752). pp. 1-24. ISSN 2352-7102. (Published)

Hanis Nadiah, Ruslan and Khairunisa, Muthusamy and Mohd Faizal, Md Jaafar and Nabilla, Mohamad and Nur Farah Aziera, Jamaludin (2023) Compressive strength and fire resistance of mortar containing crushed cockle shell as fine aggregate replacement. Materials Today: Proceedings. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Hanis Nadiah, Ruslan and Khairunisa, Muthusamy and Mohd Faizal, Md Jaafar and Nur Azzimah, Zamri and Ramadhansyah, Putra Jaya (2023) Mechanical Properties of Mortar with Anadara Granosa Waste as Partial Sand Replacement. The Open Civil Engineering Journal, 17. ISSN 1874-1495. (Published)

Harilal, Midhun and Krishnan, Syam G. and Pal, Bhupender and Reddy, M. Venkatashamy and Mohd Hasbi, Ab. Rahim and M. M., Yusoff and Rajan, Jose (2018) Environment-modulated crystallization of Cu2O and CuO nanowires by electrospinning and their charge storage properties. Langmuir, 34 (5). pp. 1873-1882. ISSN 0743-7463. (Published)

Hariram, Nediyirippil Prakasan and Mekha, K. B. and Suganthan, Vipinraj and Sudhakar, Kumarasamy (2024) Decoding the epics of sustainable world : Sustainalism. Social Sciences and Humanities Open, 10 (100958). pp. 1-16. ISSN 2590-2911. (Published)

Hariram, Nediyirippil Prakasan and Mekha, K. B. and Suganthan, Vipinraj and Sudhakar, Kumarasamy (2023) Sustainalism: An integrated socio-economic-environmental model to address sustainable development and sustainability. Sustainability (Switzerland), 15 (10682). pp. 1-37. ISSN 2071-1050. (Published)

Haryati, Awang and A F, Salmanfarsi and A, Arizam and Mohamad Idris, Ali (2021) Engineering characterisation of weathered rock at Sri Jaya, Pahang, Malaysia. IOP Conference Series: Earth and Environmental Science, 682. 012-016. ISSN 1755-1315. (Published)

Haryati, Awang and A F, Salmanfarsi and M S I, Zaini and M A F, Mohamad Yazid and Mohd Idris, Ali (2021) Investigation of groundwater table under rock slope by using electrical resistivity imaging at Sri Jaya, Pahang, Malaysia. IOP Conference Series: Earth and Environmental Science, 682. 012-017. ISSN 1755-1315. (Published)

Haryati, Awang and Song, Ki Il and Rini Asnida, Abdullah (2019) Effect of void ratio to the strength parameters of sedimentary rocks. Bulletin of the Geological Society of Malaysia, 68. pp. 147-150. ISSN 0126-6187. (Published)

Hasan, K. and Fadzil, Mat Yahaya and Karim, A. and Rokiah, Othman (2021) Investigation on the properties of mortar containing palm oil fuel ash and seashell powder as partial cement replacement. Construction, 1 (2). pp. 50-61. ISSN 2785-8731. (Published)

Hasan, K. and Islam, M. T. and Tohfa, T. S. and Fadzil, Mat Yahaya (2023) Using basalt fiber reinforced polymer as steel reinforcement - Review. Construction, 3 (1). pp. 40-53. ISSN 2785-8731. (Published)

Hasan, K. and Islam, Md. Toriqule and Ferdaus, Rashida and Fadzil, Mat Yahaya (2023) Experimental study on environment-friendly concrete production incorporating palm oil clinker & cockle shell powder as cement partial replacement. Materials Today: Proceedings. p. 183. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Hasan, K. and Rahaman, Md Mafuzur and Ali, Muaz and Urmi, Mst. Arefn Jannat and Fariha, Noshin Anjum and Islam, Md. Toriqule and Nahar, Tahmina Tasnim and Fadzil, Mat Yahaya (2023) A comprehensive review of the application of waste tire rubber in concrete/mortar as fine aggregate replacement. Architecture, Structures and Construction. pp. 1-21. ISSN 2730-9894. (Published)

Hasan, Kamrul and Karim, Ahasanul and Islam, Md. Toriqule and Ali, Muaz and Rahman, Md. Towsikur and Rahman, Md. Mahfuzur and Fadzil, Mat Yahaya (2023) A review of the mechanical properties and durability of concrete containing recycled seashells as a partial cement replacement. Journal of Material Cycles and Waste Management, 25. pp. 3192-3216. ISSN 1611-8227. (Published)

Hasan, Md. Yeasir and Monir, Minhaj Uddin and Ahmed, Mohammad Tofayal and Abd Aziz, Azrina and Shovon, Shaik Muntasir and Akash, Faysal Ahamed and Hossain Khan, Mohammad Forrukh and Faruque, Md. Jamal and Rifat, Md. Shamiul Islam and Hossain, Md. Jafar and Kundu, Prionti and Akter, Rafica and Ali, Sohag (2022) Sustainable energy sources in Bangladesh: A review on present and future prospect. Renewable and Sustainable Energy Reviews, 155 (111870). pp. 1-20. ISSN 1364-0321. (Published)

Hasan, Nawaid and Azlan, Abd Aziz and Azwan, Mahmud and Yusoff, Alias and Rosli, Besar and Luqman Hakim, Ahmad Shah and Mohd Adnin, Hamidi (2024) Vehicle sensing and localization in vehicular networks. International Journal of Technology, 15 (3). pp. 641-653. ISSN 2086-9614. (Published)

Hasanuddin, Iskandar and Mawardi, Indra and Nurdin, N. and Putra Jaya, Ramadhansyah (2023) Evaluation of properties of hybrid laminated composites with different fiber layers based on Coir/Al2O3 reinforced composites for structural application. Results in Engineering, 17 (100948). pp. 1-8. ISSN 2590-1230. (Published)

Hasnain, Syed Muhammad Wajahat ul and Farooqi, Ahmad Salam and Victor Ayodele, Bamidele and Setiabudi, Herma Dina and Farooqi, Abid Salam and Alshareef, Rayed S. and Bawadi, Abdullah (2024) Synthesis, characterization, and catalytic performance of Ni supported on sustainable POFA-derived SBA-15 for hydrogen-rich syngas from CO2 reforming of methane. Journal of Industrial and Engineering Chemistry. pp. 1-17. ISSN 1226-086X. (In Press / Online First) (In Press / Online First)

Hassan, M. H. A. and Othman, N. A. (2021) Flipped classroom approach in rigid body dynamics: A case study of five-semester observation. International Journal of Engineering Pedagogy, 11 (1). pp. 87-94. ISSN 2192-4880. (Published)

Hassan, Mohamed and Singh, Manwinder and Hamid, Khalid and Elmutasim, Imadeldin Elsayed (2023) Enhancement of outage probability for down link cooperative non-orthogonal multiple access in fifth-generation network. International Journal of Electrical and Computer Engineering, 13 (4). pp. 4119-4126. ISSN 2088-8708. (Published)

Hassan Murshid, Zsa Zsa Nura’in and Ismail, Siti Zubaidah (2022) Investigating efficiency of materials management at original equipment manufacturer (OEM). Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 18-25. ISSN 2636-9575. (Published)

Hazim, Khir and Pandey, Adarsh Kumar and Saidur, Rahman Md and Muhammad Shakeel, Ahmad and Samykano, Mahendran and Nasrudin, Abd Rahim (2024) Bismuth as efficient sintering aid for TiO2-based low temperature dye sensitized solar cell. Materials Science in Semiconductor Processing, 169 (107918). pp. 1-9. ISSN 1369-8001. (Published)

Hazimmah, S. D. S. and S., Mohd and Cheng, Hock Tian (2011) Mechanical characterization of steel fibre reinforced acrylic emulsion polymer modified concrete. Journal of Engineering and Applied Sciences, 6 (3). pp. 185-190. ISSN 1818-7803. (Published)

Hazwani, Shafei and Abdul Rahimi, Abdul Rahman and Lee, Yong Siang (2024) Effectiveness evaluation of Construction 4.0 technologies in improving built environment resilience. International Journal of Disaster Resilience in the Built Environment. pp. 1-21. ISSN 1759-5908. (In Press / Online First) (In Press / Online First)

Hazwani, Shafei and Abdul Rahimi, Abdul Rahman and Lee, Yong Siang and Che Khairil Izam, Che Ibrahim (2024) Implications of Construction 4.0 technologies to enhancing well-being : A fuzzy TOPSIS evaluation. Construction Innovation. pp. 1-35. ISSN 1471-4175. (In Press / Online First) (In Press / Online First)

Hazwani, Shafei and Afiqah, R. Radzi and Algahtany, Mohammed and Rahimi, A. Rahman (2022) Construction 4.0 Technologies and Decision-Making: A Systematic Review and Gap Analysis. Buildings, 12 (2206). pp. 1-19. ISSN 2075-5309. (Published)

Hazwani, Shafei and Rahimi, A. Rahman and Lee, Yong Siang (2024) Construction 4.0 technologies evaluation using fuzzy TOPSIS Comparison between sustainability and resiliency, well-being, productivity, safety, and integrity. Environmental Science and Pollution Research. pp. 1-36. ISSN 1614-7499. (In Press / Online First) (In Press / Online First)

Hazwani, Shafei and Rahimi, A. Rahman and Lee, Yong Siang (2024) Evaluating Construction 4.0 technologies in enhancing safety and health: case study of a national strategic plan. Journal of Engineering, Design and Technology. pp. 1-32. ISSN 1726-0531. (In Press / Online First) (In Press / Online First)

Herman, Indah Thuraya and Khairuddin, Md Isa and Naimah, Ibrahim and Saiful Azhar, Saad and Tuan Amran, Abdullah and Mohd Aizudin, Abd Aziz and Muhammad Auni, Hairunnaja (2024) Performance of waste cooking oil esterification for biodiesel production using various catalysts. Pertanika Journal of Science and Technology, 32 (2). pp. 669-684. ISSN 0128-7680. (Published)

Hiew, Thong Yap and Ngien, S. K. and Norasman, Othman and Nadiatul Adilah, Ahmad Abdul Ghani and Norhan, Abd. Rahman (2017) Parametric Investigation in Malaysian Separate Sewer Systems. Proceedings of the Institution of Civil Engineers - Municipal Engineer, 170 (ME2). pp. 90-96. ISSN 0965-0903 (Print); 1751-7699 (Online). (Published)

Hiew, Thong yap and Ngien, S. K. (2015) Analysis of Flow Characteristics in Sewerage System. Applied Mechanics and Materials, 802. pp. 599-604. ISSN 1662-7482. (Published)

Hin, Lee Lee and Fredolin, Tangang and Gisen, J. I. A. and Saim, Suratman (2017) Prediction of Salinity Intrusion in the Sheltered Estuary of Terengganu River in Malaysia using 1-D Empirical Intrusion Model. Acta Oceanologica Sinica, 36 (5). pp. 57-66. ISSN 0253-505X (Print) 1869-1099 (Online). (Published)

Hind, M. Kh. and Özakça, Mustafa and Ekmekyapar, Talha and Abdolbaqi, Mohammed Khdher (2016) Flexural behavior of concrete beams reinforced with different types of fibers. Computers and Concrete, 18 (5). pp. 999-1018. ISSN 1598-8198. (Published)

Ho, C. M. and Tan, Q. N. and Doh, S. I. and Omar, J. and Mohammed Al-Btoush, K. A. (2021) A study on the acceptance level of rack housing in Malaysia. Construction, 1 (2). pp. 1-8. ISSN 2785-8731. (Published)

Ho, Chia Min and Doh, S. I. and Li, X. and Chin, S. C. and Ashraf, Teara (2022) RSM-based modelling of cement mortar with various water to cement ratio and steel slag content. Physics and Chemistry of the Earth, 128 (103256). pp. 1-9. ISSN 1474-7065. (Published)

Ho, Chia Min and Doh, Shu Ing and Chin, Siew Choo and Li, Xiaofeng (2024) The effect of particle sizes of steel slag as cement replacement in high strength concrete under elevated temperatures. Construction and Building Materials, 411 (134531). ISSN 0950-0618. (Published)

Hoareau, Carol Emilly and Noraziah, Ahmad and Maria, Nuid and Rubiyatno, . and Khoi, Dao Nguyen and Kristanti, Risky Ayu (2021) Sustainable technology in developed countries: waste municipal management. Industrial and Domestic Waste Management, 1 (1). pp. 48-55. ISSN 2809-4255. (Published)

Hong, J. Y. and Saffuan, Wan Ahmad and Azlan, Adnan and Khairunisa, Muthusamy and Nur Farhayu, Ariffin and Fadzil, Mat Yahaya and Sharifah Maszura, Syed Mohsin (2020) Seismic performance and cost analysis for reinforced concrete school building under different type of soil. Physics and Chemistry of the Earth, Parts A/B/C, 120 (102933). pp. 1-5. ISSN 1474-7065. (Published)

Hong Kun, Lu and Noor, M. M. and Wenlin, Yu and K., Kadirgama and Badruddin, I. A. and Kamangar, S. (2024) Experimental research on heat transfer characteristics of a battery liquid-cooling system with ⊥-shaped oscillating heat pipe under pulsating flow. International Journal of Heat and Mass Transfer, 224 (125363). pp. 1-15. ISSN 0017-9310. (Published)

Hongkun, Lu and Muhamad, Mat Noor and Li, Li and Kadirgama, Kumaran (2024) Numerical simulation on the spray angle of the dual-layer hole nozzle in a partition combustion system of the diesel Engine. Journal of Advanced Research in Numerical Heat Transfer, 19 (1). pp. 29-42. ISSN 2735-0142. (Published)

Hoque, Md. Ikramul and Hasan, Muzamir and Hossain Khondoker, Md. Tareq (2023) Laboratory tests based strength evaluation of alluvial soil: A case study. Journal of Advances in Geotechnical Engineering, 6 (1). pp. 46-63. (Published)

Hoque, Md. Ikramul and Muzamir, Hasan and Datta, Shuvo Dip (2024) Undrained shear strength of soft clay reinforced with encapsulated stone dust columns. International Journal of Building Pathology and Adaptation. pp. 1-14. ISSN 2398-4708. (In Press / Online First) (In Press / Online First)

Hoque, Md. Ikramul and Muzamir, Hasan and Islam, Md Shofiqul and Houda, Moustafa and Abdallah, Mirvat and Sobuz, Md. Habibur Rahman (2023) Machine learning methods to predict and analyse unconfined compressive strength of stabilised soft soil with polypropylene columns. Cogent Engineering, 10 (1). pp. 1-21. ISSN 2331-1916. (Published)

Hoque, Md. Ikramul and Muzamir, Hasan and Jahan Mim, Nusrat (2023) Shear Strength of Soft Clay Reinforced with Single Encased Stone Dust Columns. Jurnal Teknologi (Sciences and Engineering), 85 (5). pp. 27-34. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Hoque, Md. Ikramul and Muzamir, Hasan and Meem, Tamanna Islam and Datta, Shuvo Dip (2023) Influence of Silt Content and void ratio on the properties of sand silt mixture. Journal of Advances in Geotechnical Engineering, 6 (3). pp. 8-21. (Published)

Hoque, Md. Ikramul and Muzamir, Hasan and Shuvo, Dip Datta (2023) Effect of waste plastic strip on the shear strength and permeability characteristics of black cotton soil. Journal of Applied Science and Engineering, 27 (2). pp. 2019-2028. ISSN 1560-6686. (Published)

Hossain, Mohamed Amjed and Islam, Mir Sujaul and Nasly, Mohamed Ali (2014) Application of QUAL2Kw for Water Quality Modeling in the Tunggak River, Kuantan, Pahang, Malaysia. Research Journal of Recent Sciences, 3 (6). pp. 6-14. ISSN 2277-2502. (Published)

Hossain, Toufiq Md and Jamlos, M. F. and Mohd Aminudin, Jamlos and Soh, Ping Jack and Siti Zuraidah, Ibrahim and Muammar, Mohamad Isa and Schreurs, Dominique M. M.-P. and Narbudowicz, Adam and Mohd Fairusham, Ghazali (2019) Compact broadband triple-ring five-port reflectometer for microwave brain imaging applications. IEEE Access, 7. pp. 29597-29609. ISSN 2169-3536. (Published)

Hossen, Md Arif and Azrina, Abd Aziz and Ikreedeegh, Riyadh Ramadhan and Aamina, Din Muhammad and Nurashikin, Yaacof and Kah, Hon Leong and Wu, Lihua (2024) Optimization of anodizing parameters for the morphological properties of TiO2 nanotubes based on response surface methodology. Next Materials, 2 (100061). pp. 1-10. ISSN 2949-8228. (Published)

Hossen, Md. Arif and Ikreedeegh, Riyadh Ramadhan and Azrina, Abd Aziz and Zerga, Abdelmoumin Yahia and Tahir, Muhammad (2024) Carbon-based nanomaterials (CNMs) modified TiO2 nanotubes (TNTs) photo-driven catalysts for sustainable energy and environmental applications A comprehensive review. Journal of Environmental Chemical Engineering, 12. pp. 1-42. ISSN 2213-3437. (Published)

Hossen, Md. Arif and Nurashikin, Yaacof and Fariha Najwa, Azahar and Noraziah, Ahmad and Azrina, Abd Aziz (2024) Removal of ammoniacal nitrogen from Malaysian palm oil mill effluent (POME) using optimized operating parameters of peat soil as natural adsorbent. Cleaner Water, 2 (100031). pp. 1-22. ISSN 2950-2632. (In Press / Online First) (In Press / Online First)

Hossen, Md. Arif and Solayman, H. M. and Leong, Kah Hon and Sim, Lan Ching and Yaacof, Nurashikin and Abd Aziz, Azrina and Lihua, Wu and Monir, Minhaj Uddin (2022) A comprehensive review on advances in TiO2 nanotube (TNT)-based photocatalytic CO2 reduction to value-added products. Energies, 15 (22). pp. 1-23. ISSN 1996-1073. (Published)

Hossen, Md. Arif and Solayman, H. M. and Leong, Kah Hon and Sim, Lan Ching and Yaacof, Nurashikin and Abd Aziz, Azrina and Wu, Lihua and Monir, Minhaj Uddin (2022) Recent progress in TiO2-Based photocatalysts for conversion of CO2 to hydrocarbon fuels: A systematic review. Results in Engineering, 16 (100795). pp. 1-18. ISSN 2590-1230. (Published)

Hossen, Md. Arif and Yaacof, Nurashikin and Abd Aziz, Azrina and Lihua, Wu (2023) Latest progress on the influencing factors affecting the formation of TiO2 nanotubes (TNTS) in electrochemical anodization- A minireview. Acta Chemica Malaysia (ACMY), 7 (1). pp. 8-15. ISSN 2576-6732. (Published)

Hou, Wentao and Ding, Yuquan and Huang, Guoqaing Qiang and Huda, Nazmul and Luqman Hakim, Ahmad Shah and Piao, Zhongyu and Shen, Yifu and Shen, Zhikang and Gerlich, Adrian P. (2022) The role of pin eccentricity in friction stir welding of Al‑Mg‑Si alloy sheets : microstructural evolution and mechanical properties. International Journal of Advanced Manufacturing Technology, 121 (11-12). pp. 7661-7675. ISSN 0268-3768. (Published)

Hu, Haichao and Wei, Qiang and Liu, Boya and Liu, Yun and Hu, Ning and Quanjin, Ma and Wang, Chuancai (2022) Progressive damage behaviour analysis and comparison with 2D/3D hashin failure models on carbon fibre–reinforced aluminium laminates. Polymers, 14 (2946). pp. 1-25. ISSN 2073-4360. (Published)

Hua, Z. Z. and Jamaludin, Omar and Doh, Shu Ing (2024) Investigation on the Space Patterns and Influential Factors for Distribution of Traditional Villages in Sichuan. Construction, 4 (2). 193 -207. ISSN 2785-8731. (Published)

Hujainah, Fadhl and Rohani, Abu Bakar and Al-haimi, Basheer and Abdulgabber, Mansoor Abdullateef (2018) Investigation of stakeholder analysis in requirement prioritization techniques. Advanced Science Letters, 24 (10). pp. 7227-7231. ISSN 1936-6612. (Published)

Humada, Ali Mahmood and Hojabri, Mojgan and Mekhilef, Saad and Hamada, Hussein M. (2016) Solar Cell Parameters Extraction Based on Single and Double-Diode Models: A Review. Renewable and Sustainable Energy Reviews, 56. pp. 494-509. ISSN 1364-0321. (Published)

Husin, Husni and Mahidin, Mahidin and Marwan, Marwan and Nasution, Fahrizal and Erdiwansyah, Erdiwansyah and Ahmadi, Ahmadi and Muchtar, Syawaliah and Yani, Firda Tirta and Rizalman, Mamat (2023) Conversion of polypropylene-derived crude pyrolytic oils using hydrothermal autoclave reactor and Ni/aceh natural zeolite as catalysts. Heliyon, 9 (e14880). pp. 1-10. ISSN 2405-8440. (Published)

Husni, Husin and Erdiwansyah, Erdiwansyah and Ahmadi, Ahmadi and Fahrizal, Nasution and Rinaldi, Wahyu and Abnisa, Faisal and Rizalman, Mamat (2022) Efficient hydrogen production by microwave-assisted catalysis for glycerol-water solutions via NiO/zeolite-CaO catalyst. South African Journal of Chemical Engineering, 41. pp. 43-50. ISSN 1026-9185. (Published)

Hussanan, Abid and Mohd Zuki, Salleh and Khan, Ilyas and Chen, Zhi-Min (2019) Unsteady water functionalized oxide and non-oxide nanofluids flow over an infinite accelerated plate. Chinese Journal of Physics, 62. pp. 115-131. ISSN 0577-9073. (Published)

Hussein M., Hamada and Alyaa A., Al-Attar and Bassam, Tayeh and Fadzil, Mat Yahaya and Yazan I., Abu Aisheh (2023) Optimising concrete containing palm oil clinker and palm oil fuel ash using response surface method. Ain Shams Engineering Journal, 14 (102150). pp. 1-14. ISSN 2090-4479. (Published)

I., Albiajawi and R., Embong and K., Muthusamy (2021) Influence of mineral admixtures on the properties of self-compacting concrete: An overview. Construction, 1 (2). pp. 62-75. ISSN 2785-8731. (Published)

Ikreedeegh, Riyadh Ramadhan and Hossen, Md Arif and Sherryna, Areen and Muhammad, Tahir (2024) Recent advances on synthesis and photocatalytic applications of MOF-derived carbon materials : A review. Coordination Chemistry Reviews, 510 (215834). pp. 1-40. ISSN 0010-8545. (Published)

Ikreedeegh, Riyadh Ramadhan and Hossen, Md. Arif and Tahir, Muhammad and Azrina, Abd Aziz (2023) A comprehensive review on anodic TiO2 nanotube arrays (TNTAs) and their composite photocatalysts for environmental and energy applications: Fundamentals, recent advances and applications. Coordination Chemistry Reviews, 499 (215495). pp. 1-30. ISSN 0010-8545. (Published)

Ikreedeegh, Riyadh Ramadhan and Tasleem, Sehar and Hossen, Md Arif (2024) Facile fabrication of binary g-C3N4/NH2-MIL-125(Ti) MOF nanocomposite with Z-scheme heterojunction for efficient photocatalytic H2 production and CO2 reduction under visible light. Fuel, 360 (130561). pp. 1-17. ISSN 0016-2361. (Published)

Imran, Ali and Quazi, M. M. and Zalnezhad, E. and Sarhan, Ahmed A. D. and N. Liana, Sukiman and M., Ishak (2019) Hard anodizing of aerospace AA7075-T6 aluminum alloy for improving surface properties. Transactions of the Indian Institute of Metals, 72 (10). pp. 2773-2781. ISSN 0972-2815. (Published)

Indra, Mawardi and Hanif, Razak and Zaini, Akadir and Putra Jaya, Ramadhansyah (2024) The effect of containing Al2O3 microparticles in different matrix polymers on properties of pineapple fiber-reinforced composites. Frattura ed Integrità Strutturale, 18 (67). pp. 94-107. ISSN 1971-8993. (Published)

Indra, Mawardi and Nurdin, N. and Fakhriza, Fakhriza and Ali, Jannifar and Hanif, Razak and Putra Jaya, Ramadhansyah (2024) Performance of blockboard using particle composite bagasse waste as core layer materials. Composites and Advanced Materials, 33. pp. 1-11. ISSN 2634-9833. (Published)

Intan Najiha Akhmar, Saharuddin and Doh, Shu Ing (2019) Factors Influencing Road Damage in Developing Countries. International Journal of Engineering Research and Management (IJERM), 6 (2). pp. 1-4. ISSN 2349-2058. (Published)

Intan Najiha Akhmar, Saharuddin and Doh, Shu Ing (2021) A study of soil characteristics of road damages in Jeram, Kuala Selangor. IOP Conf. Series: Materials Science and Engineering, 1062 (012009). pp. 1-7. (Published)

Intan Suhana, Mohd Razelan (2017) Safer Roads: Comparisons Between Road Assessment Program and Composite Road Safety Index Method. MATEC Web of Conferences (08005). pp. 1-9. ISSN 2261-236X. (Published)

Intan Suhana, Mohd Razelan and Azlina, Ismail and Zahrizan, Zakaria (2019) Proactive safety measure using road environment assessment program (REAP). International Journal of Integrated Engineering, 11 (2). pp. 269-279. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Intan Suhana, Mohd Razelan and H., Hussain and T. H., Law and Ahmad Farhan, Md. Shokeri (2015) Locating Problematic Road Sections: Comparisons between Crash Data and Composite Index Method. Applied Mechanics and Materials, 802. pp. 345-350. ISSN 1662-7482. (Published)

Intan Suhana, Mohd Razelan and Hussain, Hamid and Teik Hwa, Law and Ahmad, Farhan (2014) Identification of Hazardous Road Sections: Crash Data versus Composite Index Method. IACSIT International Journal of Engineering and Technology, 6 (6). pp. 481-486. (Published)

Intan Syahiera, Azli and Afkar Rabbani Hidayatullah, Hipeni and Khairatun Najwa, Mohd Amin (2022) Cellulose nanocrystals derived from oil palm empty fruit bunch reinforced natural rubber latex nanocomposites. Journal of Oil Palm Research, 34 (3). pp. 497-505. ISSN 1511-2780. (Published)

Iqbal, A. R. and Muhammad, Khairul Fikri (2022) Analysis and design of control system for desktop size concrete 3D printer. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 80-87. ISSN 2637-0883. (Published)

Iqbal, AKM Asif and Lim, Mei Jing (2023) A relationship of porosity and mechanical properties of spark plasma sintered scandia stabilized zirconia thermal barrier coating. Results in Engineering, 19 (101263). pp. 1-7. ISSN 2590-1230. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Cionita, Tezara and Siregar, Januar Parlaungan and Laksmidewi, Dwinita and Baskara, Gregorius Dimas and Mohd Zulkifly, Abdullah and Ramli, Junid and Hadi, Agung Efriyo and Mohammad Hazim, Mohamad Hamdan and Najid, Najid (2022) Overview of the important factors influencing the performance of eco-friendly brake pads. Polymers, 14 (1180). pp. 1-22. ISSN 2073-4360. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Anggarina, Paula Tjatoerwidya and Utama, Didi Widya and Rihayat, Teuku and Rusiyanto, Rusiyanto and Dimyati, Saeful and Aripin, Muhammad Bustanul and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Baskara, Gregorius Dimas and Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi (2023) Influence of varying concentrations of epoxy, rice husk, Al2O3, and Fe2O3 on the properties of brake friction materials prepared using hand layup method. Polymers, 15 (2597). pp. 1-19. ISSN 2073-4360. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Anggarina, Paula Tjatoerwidya and Utama, Didi Widya and Rihayat, Teuku and Rusiyanto, Rusiyanto and Dimyati, Saeful and Aripin, Muhammad Bustanul and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Baskara, Gregorius Dimas and Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi (2023) Influence of varying concentrations of epoxy, rice husk,Al2O3, and Fe2O3on the properties of brake friction materials prepared using hand layup method. Polymers, 15 (2597). pp. 1-19. ISSN 2073-4360. (Published)

Irene, Wei Kiong Ting and Noor Azlinna, Azizan and Kweh, Qian Long (2016) Managerial Overconfidence and Leverage Decision. The Moderating Effect of Human Governance in Malaysia. Journal for Global Business Advancement (JGBA), 9 (1). pp. 38-51. ISSN 1746-966X (print); 1746-9678 (online). (Published)

Irna Haslina, Ibrahim and Nor Shafiqah, Mohd Nasir and Siti Nor Amira, Rosli and Hassan, Mohamed and Panpranot, Joongjai and Cuong Nguyen, Van and Sumaiya, Zainal Abidin Optimization of syngas production via methane bi-reforming using CeO2 promoted Cu/MnO2 catalyst. Chemical Engineering Research and Design. ISSN 0263-8762. (Published)

Irnie Azlin, Zakaria and Wan Ahmad Najmi, Wan Mohamed and N. H.A., Azid and M. A., Suhaimi and Wan Hamzah, Azmi (2022) Heat transfer and electrical discharge of hybrid nanofluid coolants in a fuel cell cooling channel application. Applied Thermal Engineering, 210 (118369). pp. 1-13. ISSN 1359-4311. (Published)

Ishak, M.F. and Muhammad Farhan, Zolkepli (2017) Exploration of Method for Slope Stabilization Influenced by Unsaturated Soil. Science International, 29 (1). pp. 105-108. ISSN 1013-5316. (Published)

Iskandar, Waini and Khairum, Hamzah and Najiyah, Safwa Khashi'ie and Nurul Amira, Zainal and Mohd Kasim, Abdul Rahman and Anuar, Ishak and Pop, Ioan (2023) Brownian and thermophoresis diffusion effects on magnetohydrodynamic Reiner–Philippoff nanofluid flow past a shrinking sheet. Alexandria Engineering Journal, 67. pp. 183-192. ISSN 1110-0168. (Published)

Iskandar, Waini and Najiyah Safwa, Khashi’ie and Abdul Rahman, Mohd Kasim and Nurul Amira, Zainal and Khairum, Hamzah and Norihan, Md Arifin and Pop, Ioan (2022) Unsteady magnetohydrodynamics (mhd) flow of hybrid ferrofluid due to a rotating disk. Mathematics, 10 (10). pp. 1-20. ISSN 2227-7390. (Published)

Islam, Aminul and Ahmed, Tofayal and Awual, Md. Rabiul and Rahman, Aminur and Sultana, Monira and Azrina, Abd Aziz and Monir, Minhaj Uddin and Teo, Siow Hwa and Hasan, Mehedi (2020) Advances in sustainable approaches to recover metals from e-waste-A review. Journal of Cleaner Production, 244 (118815). ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Islam, Anamul and Sundaraj, Kenneth and R. Badlishah, Ahmad and Ahamed, Nizam Uddin and Md. Asraf, Ali (2015) Analysis of Crosstalk in the Mechanomyographic Signals Generated by Forearm Muscles During Different Wrist Postures. Muscle & Nerve, 51 (6). pp. 899-906. ISSN 1097-4598. (Published)

Islam, Md Shofiqul and Hasan, Khondokar Fida and Sultana, Sunjida and Uddin, Shahadat and Lio’, Pietro and Quinn, Julian M.W. and Moni, Mohammad Ali (2023) HARDC : A novel ECG-based heartbeat classification method to detect arrhythmia using hierarchical attention based dual structured RNN with dilated CNN. Neural Networks, 162. pp. 271-287. ISSN 0893:6080. (Published)

Islam, Md Shofiqul and Islam, Md Nahidul and Noramiza, Hashim and Rashid, Mamunur and Bari, Bifta Sama and Al Farid, Fahmid (2022) New hybrid deep learning approach using bigru-bilstm and multilayered dilated cnn to detect arrhythmia. IEEE Access, 10. pp. 58081-58096. ISSN 2169-3536. (Published)

Islam, Md Shofiqul and Kabir, Muhammad Nomani and Ngahzaifa, Ab Ghani and Kamal Zuhairi, Zamli and Nor Saradatul Akmar, Zulkifli and Rahman, Md Mustafizur and Moni, Mohammad Ali (2024) "Challenges and future in deep learning for sentiment analysis: a comprehensive review and a proposed novel hybrid approach". Artificial Intelligence Review, 57 (62). pp. 1-79. ISSN 0269-2821. (Published)

Islam, Md Shofiqul and Ngahzaifa, Ab Ghani and Kamal Zuhairi, Zamli and Md Munirul, Hasan and Abbas Saliimi, Lokman (2024) KHACDD : A knowledge-based hybrid method for multilabel sentiment analysis on complex sentences using attentive capsule and dual structured recurrent network. Neural Computing and Applications. pp. 1-22. ISSN 0941-0643. (In Press / Online First) (In Press / Online First)

Islam, Md Shofiqul and Sultana, Sunjida and Farid, Fahmid Al and Islam, Md Nahidul and Rashid, Mamunur and Bari, Bifta Sama and Noramiza, Hashim and Mohd Nizam, Husen (2022) Multimodal hybrid deep learning approach to detect tomato leaf disease using attention based dilated convolution feature extractor with logistic regression classification. Sensors, 22 (6079). pp. 1-31. ISSN 1424-8220. (Published)

Islam, Md. Imamul and Jadin, Mohd Shawal and Mansur, Ahmed Al and Mohamed Kamari, Nor Azwan and Jamal, Taskin and Hossain Lipu, Molla Shahadat and Mohd Azlan, Mohd Nurulakla and Sarker, Mahidur R. and Shihavuddin, A.S.M. (2023) Techno-economic and carbon emission assessment of a large-scale floating solar pv system for sustainable energy generation in support of malaysia’s renewable energy roadmap. Energies, 16 (4034). pp. 1-32. ISSN 1996-1073. (Published)

Islam, Md. Imamul and Maruf, Md Hasan and Al Mansur, Ahmed and Ashique, Ratil H. and Asif ul Haq, Mohammad and Shihavuddin, Asm S.M. and Mohd Shawal, Jadin (2023) Feasibility analysis of floating photovoltaic power plant in Bangladesh: A case study in Hatirjheel Lake, Dhaka. Sustainable Energy Technologies and Assessments, 55 (102994). pp. 1-16. ISSN 2213-1388. (Published)

Islam, Mir Sujaul and Arafat, Md. Yasir and Zularisam, A. W. and Edriyana, Abd Aziz (2017) Characterization of Chini Lake Water Quality with Malaysian WQI using Multivariate Statistical Analysis. Bangladesh Journal of Botany, 46 (2). pp. 691-699. ISSN 0253-5416. (Published)

Islam, Mir Sujaul and B. S., Ismail and M. A., Tayeb (2016) Hydrology and Sediment Loading in a Degrading Natural Lake System in Malaysia. Environmental Earth Sciences, 75 (231). pp. 1-7. ISSN 1866-6299. (Published)

Islam, Mir Sujaul and B. S., Ismail and M. A., Tayeb and Muhammad Barzani, Gasim and Sahibin, Abd. Rahim (2016) Morphological and Physico-Chemical Characteristics of Soils in the Tasik Chini Catchment in Pahang, Malaysia. Pertanika Journal of Science & Technology (JST), 24 (1). pp. 71-87. ISSN 0128-7680. (Published)

Islam, Mir Sujaul and B. S., Ismail and Muhammad Barzani, Gasim and A. R., Sahibin and T., Mohd Ekhwan (2012) Hydrological Assessment and Water Quality Characteristics of Chini Lake, Pahang, Malaysia. American-Eurasian Journal of Agricultural & Environmental Sciences, 12 (6). pp. 737-749. ISSN 1818-6769. (Published)

Islam, Mir Sujaul and B. S., Ismail and Muhammad Barzani, Gasim and Mohd Ekhwan, Toriman and Sahibin, Abd. Rahim and Zularisam, A. W. (2012) Application of GIS for Detecting Changes of Land Use and Land Cover in Tasik Chini Watershed, Pahang, Malaysia. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 13-21. ISSN 2180-2742. (Published)

Islam, Mir Sujaul and Hossain, Mohamed Amjed and Nasly, Mohamed Ali (2013) Multivariate Statistical Techniques to Identify the Source of Pollution and Assessment of Surface Water Quality. International Journal of Ecology and Environmental Sciences, 39 (3). pp. 187-193. ISSN 2320-5199. (Published)

Islam, Mir Sujaul and Karim, Md. Abdul and Mohamad Idris, Ali and Noram Irwan, Ramli (2017) Assessment of Heavy Metal Contents in Surface Sediment of the Tungguk River Surrounding the Industrial Complex of Gebeng City. Bioresearch Communications, 3 (1). pp. 362-371. ISSN 2411-0485 (Print); 2411-0272 (Online). (Published)

Islam, Mir Sujaul and M. G., Rasul and Fadzil, Mat Yahaya and Lubna, Alam and Mazlin, Mokhtar (2015) Effects of Anthropogenic Impact on Water Quality in Bertam Catchment, Cameron Highlands, Malaysia. International Journal of Ecology and Environmental Sciences, 41 (1-2). pp. 75-86. ISSN 2320-5199. (Published)

Islam, Mir Sujaul and Md Abdus, Sobahan and R. M., Yunus and Md Abdul, Karim (2015) Evaluation of Novel Bio-friendly Two-step Process in the Removal of Heavy Metals from the Wastewater. Bangladesh Journal of Botany, 44 (4). pp. 571-579. ISSN 0253-5416 (print); 2079-9926 (online) . (Published)

Islam, Mir Sujaul and Muhammad Barzani, Gasim and B. S., Ismail and A. R., Sahibin and T., Mohd Ekhwan (2012) Estimation of the Rate of Soil Erosion in the Tasik Chini Catchment, Malaysia using the RUSLE Model Integrated with the GIS. Australian Journal of Basic and Applied Sciences, 6 (12). pp. 286-296. ISSN 1991-8178. (Published)

Islam, Mir Sujaul and Rasul, Md Golam and R. M., Yunus and Mazlin, Mokhtar and Arafat, Md Yasir (2018) Adverse Impact of Land Use Changes on Degrading Environment in Bertam River Catchment, Cameron Highlands, Malaysia. International Journal of Ecology and Environmental Sciences, 44 (2). pp. 155-163. ISSN 2320-5199 (Online). (Published)

Islam, Mir Sujaul and Sobahan, Md Abdus and R. M., Yunus (2015) An Investigation of Water Quality Status in Gebeng Industrial Estate, Pahang, Malaysia. Environment Conservation Journal, 16 (1 & 2). pp. 25-35. ISSN 0972-3099 (Print), 2278-5124 (Online). (Published)

Ismael Sahib, Hussein and Alsudani, Mustafa Qahtan and Ali, Mohammed Hasan and Qassim Abbas, Haydar and Moorthy, Kohbalan and Adnan, Myasar Mundher (2023) Proposed intelligence systems based on digital Forensics : Review paper. Materials Today: Proceedings, 80. pp. 2647-2651. ISSN 2214-7853. (Published)

Ismail, Mohd Khairuddin and Shahrul Naim, Sidek and Anwar, P. P. Abdul Majeed and Mohd Azraai, Mohd Razman and Asmarani, Ahmad Puzi and Hazlina, Md Yusof (2021) The classification of movement intention through machine learning models: the identification of significant time-domain EMG features. PeerJ Computer Science, 7. pp. 1-15. ISSN 2376-5992. (Published)

Ismail, Muhammad Yusri and Beg, M. S. and Jamlos, M. F. and Azmi, W. H. and Badrulhisam, N. H. and Awad, Omar I. (2022) Potential and limitation of internet of things (IOT) application in the automotive industry: An overview. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). 9939 -9949. ISSN 2180-1606. (Published)

Ismail, Rifky and Cionita, Tezara and Lai, Yinling and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Bayuseno, Athanasius Priharyoto and Nugraha, Fariz Wisda and Muhamadin, Rilo Chandra and Irawan, Agustinus Purna and Hadi, Agung Efriyo (2022) Characterization of PLA/PCL/green mussel shells Hydroxyapatite (HA) biocomposites prepared by chemical blending methods. Materials, 15 (8641). pp. 1-17. ISSN 1996-1944. (Published)

Ismail, Rifky and Fitriyana, Deni Fajar and Bayuseno, Athanasius Priharyoto and Jamari, Jamari and Pradiptya, Putut Yoga and Muhamadin, Rilo Chandra and Nugraha, Fariz Wisda and Rusiyanto, Rusiyanto and Setiyawan, Andri and Bahatmaka, Aldias and Firmansyah, Hendrix Noviyanto and Anis, Samsudin and Irawan, Agustinus Purna and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Investigating the effect of deacetylation temperature on the characterization of chitosan from crab shells as a candidate for organic nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 55-67. ISSN 2289-7879. (Published)

Ismail, Rifky and Fitriyana, Deni Fajar and Bayuseno, Athanasius Priharyoto and Munanda, Rafi and Nugraha, Fariz Wisda and Rusiyanto, R. and Setiyawan, Andri and Bahatmaka, Aldias and Firmansyah, Hendrix Noviyanto and Anis, Samsudin and Irawan, Agustinus Purna and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Design, manufacturing and characterization of biodegradable bone screw from PLA Prepared by fused deposition modelling (FDM) 3D printing technique. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 205-215. ISSN 2289-7879. (Published)

Ittoo, Bhavishkar and Ooi, Jong Boon and Tran, Manh Vu and Jaliliantabar, Farzad and Najafi, Gholamhassan and Swamy, Varghese (2022) Effects of dispersed multiwalled carbon nanotubes on the micro-explosion and combustion characteristics of 2-methylfuran – diesel mixture droplets. Fuel, 316 (123308). pp. 1-10. ISSN 0016-2361. (Published)

Izatti, Md Amin and Mohd Rafi, Adzman and Haziah, Abdul Hamid and Muhd Hafizi, Idris and Melaty, Amirruddin and Omar, Aliman (2023) Differential equation fault location algorithm with harmonic effects in power system. Telkomnika (Telecommunication Computing Electronics and Control), 21 (3). pp. 684-694. ISSN 1693-6930. (Published)

Izzuddin, Bassam A. and Jokhio, Gul A. (2016) Mixed-Dimensional Coupling for Parallel Partitioned Nonlinear Finite-Element Analysis. Journal of Computing in Civil Engineering, 31 (3). pp. 1-13. ISSN 0887-3801. (Published)

J., Mogan and W. S. W., Harun and K., Kadirgama and D., Ramasamy and F. M., Foudzi and A. B., Sulong and F., Tarlochan and F., Ahmad (2023) Fused Deposition Modelling of Polymer Composite: A Progress. Polymers, 15 (1). pp. 1-27. ISSN 2073-4360. (Published)

Jaafar, H.I. and Mohamed, Z. and Mohd Ashraf, Ahmad and Wahab, N.A. and Ramli, L. and Shaheed, M.H. (2021) Control of an underactuated double-pendulum overhead crane using improved model reference command shaping: Design, simulation and experiment. Mechanical Systems and Signal Processing, 151 (107358). pp. 1-18. ISSN 0888-3270. (Published)

Jabbar, Waheb A. and Annathurai, Sanmathy and Tajul Ariffin, A. Rahim and M. Fitri, Mohd Fauzi (2022) Smart energy meter based on a long-range wide-area network for a stand-alone photovoltaic system. Expert Systems with Applications, 197 (116703). pp. 1-18. ISSN 0957-4174. (Published)

Jabbar, Waheb A. and Mei Ting, Tan and Mohd Fikri Ikmal, Hamidun and Ajwad Hariz, Che Kamarudin and Wu, Wenyan and Sultan, Jamil and Alsewari, Abdulrahman A. and Mohammad A.H., Ali (2024) Development of LoRaWAN-based IoT system for water quality monitoring in rural areas. Expert Systems with Applications, 242 (122862). pp. 1-18. ISSN 0957-4174. (Published)

Jabbar, Waheb A. and Subramaniam, Thanasrii and Ong, Andre Emelio and Mohd Iqmal, Shu'Ib and Wu, Wenyan and de Oliveira, Mario A. (2022) LoRaWAN-Based iot system implementation for long-range outdoor air quality monitoring. Internet of Things, 19 (100540). pp. 1-25. ISSN 2542-6605. (Published)

Jabbar, Waheb A. and Tiew, Lu Yi and Nadiah Yasmin, Ali Shah (2024) Internet of things enabled parking management system using long range wide area network for smart city. Internet of Things and Cyber-Physical Systems, 4. pp. 82-98. ISSN 2667-3452. (Published)

Jacob, Jeeja and Pandey, Adarsh Kumar and Nasrudin, Abd Rahim and Selvaraj, Jeyraj and Paul Nadakkal, John (2024) Multi-wall carbon nanotubes tailored eutectic composites for solar energy harvesting. Energy, 288 (129777). pp. 1-12. ISSN 0360-5442. (Published)

Jacob, Jeeja and Pandey, Adarsh Kumar and Nasrudin, Abd Rahim and Selvaraj, Jeyraj A.L. and Samykano, Mahendran and Saidur, Rahman Md and Tyagi, Vineet Veer (2022) Concentrated Photovoltaic Thermal (CPVT) systems : Recent advancements in clean energy applications, thermal management and storage. Journal of Energy Storage, 45 (103369). pp. 1-25. ISSN 2352-152X. (Published)

Jadhav, Pramod and Krishnan, Santhana and Kamyab, Hesam and Zaied, Khalid and Bhuyar, Prakash and A. W., Zularisam and Mohd Nasrullah, Zulkifli (2023) Characterisation of synthesised trimetallic nanoparticles and its influence on anaerobic digestion of palm oil mill effluent. Chemosphere, 246 (140512). ISSN 0045-6535. (Published)

Jadhav, Pramod and Nurmunira, Muhammad and Bhuyar, Prakash and Krishnan, Santhana and Abdul Syukor, Abd Razak and Zularisam, A. W. and Mohd Nasrullah, Zulkifli (2021) A review on the impact of conductive nanoparticles (CNPs) in anaerobic digestion: Applications and limitations. Environmental Technology & Innovation, 23 (101526). pp. 1-16. ISSN 2352-1864. (Published)

Jadhav Pramod, Chandrakant and Zaied, Khalid and Krishnan, Santhana and Bhuyar, Prakash and A. W., Zularisam and Abdul Syukor, Abd Razak and Mohd Nasrullah, Zulkifli (2022) Application of iron‐cobalt‐copper (Fe‐Co–Cu) trimetallic nanoparticles on anaerobic digestion (AD) for biogas production. Biomass Conversion and Biorefinery. pp. 1-11. ISSN 2190-6823. (Published)

Jadhav Pramod, Chandrakant and Zaied, Khalid and Zularisam, A. W. and Krishnan, Santhana (2021) The role of iron-based nanoparticles (Fe-NPs) on methanogenesis in anaerobic digestion (AD) performance. Environmental Research (112043). pp. 1-48. ISSN 0013-9351. (In Press / Online First) (In Press / Online First)

Jahan, Israt and Uddin, K. M. Aslam and Murad, Saydul Akbar and Miah, Md Saef Ullah and Khan, Tanvir Zaman and Masud, Mehedi and Aljahdali, Sultan and Bairagi, Anupam Kumar (2023) 4D : A real-time driver drowsiness detector using deep learning. Electronics (Switzerland), 12 (235). pp. 1-17. ISSN 2079-9292. (Published)

Jaliliantabar, Farzad and Ghobadian, Barat and Carlucci, Antonio Paolo and Najafi, Gholamhassan and Rizalman, Mamat and Ficarella, Antonio and Strafella, Luciano and Santino, Angelo and De Domenico, Stefania (2019) A comprehensive study on the effect of pilot injection, EGR rate, IMEP and biodiesel characteristics on a CRDI diesel engine. Energy, 194 (116860). pp. 1-13. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Jaliliantabar, Farzad and Rizalman, Mamat and Kumarasamy, Sudhakar (2022) Latent heat prediction of nano enhanced phase change material by ann method. Energy Engineering: Journal of the Association of Energy Engineering, 119 (3). pp. 847-861. ISSN 0199-8595. (Published)

Jamal Hisham, Hashim and Mohammad Adam, Adman Health Impact Assessment as a planning and decision-making tool. Malaysian Journal of Medicine and Health Sciences, 17 (3). pp. 303-307. ISSN 2636-9346 (Online). (Published)

Jamiluddin, Jaafar and Siregar, J. P. and Tezara, C. and Mohammad Hazim, Mohamad Hamdan and Teuku, Rihayat (2019) A review of important considerations in the compression molding process of short natural fiber composites. The International Journal of Advanced Manufacturing Technology, 105 (7-8). pp. 3437-3450. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Jarrud, Mohammed Muftah and Lim, Kar Sing and Mohd Syahrul Hisyam, Mohd Sani (2021) An overview of numerical studies on flexural performance of built-up cold-formed steel beam (CFSB) filled with concrete. International Journal of Emerging Trends in Engineering Research, 9 (2). pp. 15-24. ISSN 2347-3983. (Published)

Jasim, Saleh Eesaa and Mohamad Ashry, Jusoh and Muhammad Aizat, Kamarudin and Fahmiruddin, Esa and Rodziah, Nazlan (2020) Effect of processing parameters on the morphology, particulate, and superconducting properties of electrospun YBCO nanostructures. Journal of Nano Research, 63. pp. 89-97. ISSN 1662-5250. (Published)

Javed, Omama and Radhiyah, Abd Aziz (2022) Bimetallic Prussian Blue Analogues: An Efficient Electrode Alternative for Energy Storage Applications. Materials Science Forum, 1056. pp. 45-52. ISSN 1662-9752. (Published)

Jaya Devi, Anathan and Liyana, Mohamed Yusof and Rahimi, A. Rahman (2023) Internet of Things (IoT) impact on facility management of office buildings: A qualitative study. Journal of Engineering, Project, and Production Management, 13 (3). pp. 1-12. ISSN 2221-6529. (Published)

Ji, Yuanfa and He, Jianzhong and Sun, Xiyan and Bai, Yang and Wei, Zhaochuan and Kamarul Hawari, Ghazali (2022) Learning augmented memory joint aberrance repressed correlation filters for visual tracking. Symmetry, 14 (1502). pp. 1-19. ISSN 2073-8994. (Published)

Jiang, Xia and Yan, Wei and Shi, Gaofeng and Cai, Wei and Lu, Shiwu and Mishra, Puranjan (2023) Bioenzyme activation preparation of Fe3O/carbon nanofibers as supercapacitor electrode materials. Ionics, 29 (4). pp. 1617-1626. ISSN 0947-7047. (Published)

Jiang, Yanjie and Liu, Haotian and Liu, Haifeng and Che, Jialing and Liu, Yijiang and Yang, Weiwu and Doh, Shu Ing (2024) Effect of stress level on the frost resistance and uniaxial compressive properties of desert sand concrete. Journal of Material in Civil Engineering, 36 (12). pp. 1-16. ISSN 1943-5533. (Published)

Jing, Wang and Naji, Hafeth Ibrahem and Zehawi, Raquim Nihad and Hasan Ali, Zainab and Al-Ansari, Nadhir and Yaseen, Zaher Mundher (2019) System dynamics modeling strategy for civil construction projects : the concept of successive legislation periods. Symmetry, 11 (5). pp. 1-18. ISSN 2073-8994. (Published)

Jing, Xin and Cui, ZiZhi and Doh, Shu Ing and Ma, Li and Wei, Lu (2021) Effect of freeze-thaw cycles on shear strength of unsaturated bentonite modified clay. Physics and Chemistry of the Earth, 121. pp. 1-10. ISSN 1474-7065. (Published)

Johari, N. A. and F. R. M., Romlay and W. S., Wan Harun (2019) SS 316L/HA composite via powder injection moulding: Mechanical and physical properties. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5480 -5492. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Johari, N. A. and Juliawati, A. and Zanurin, A. and Mohamed, N. S. and Alang, N. A. and M. Zain, M. Z. (2022) Recent progress of self-healing coatings for magnesium alloys protection. Journal of Coatings Technology and Research, 19 (3). 757 -774. ISSN 1547-0091. (Published)

John Paul, Nadakkal and K., Kadirgama and Mahendran, Samykano and Saidur, R. and Pandey, A. K. and Mohan, R. V. (2022) An updated review on low-temperature nanocomposites with a special focus on thermal management in buildings. Energy Engineering, 119 (4). 1299 -1325. ISSN 0199-8595. (Published)

Jokhio, Gul Ahmed and Saad, Fatehi Mansoor and Gul, Yasmeen and Sharifah Maszura, Syed Mohsin and Noram Irwan, Ramli (2018) Uniaxial compression and tensile splitting tests on adobe with embedded steel wire reinforcement. Construction and Building Materials, 176. pp. 383-393. ISSN 0950-0618. (Published)

Jothi Letchumy, Mahendra Kumar and Rashid, Mamunur and Musa, Rabiu Muazu and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2021) The classification of EEG-based wink signals: A CWT-Transfer Learning pipeline. ICT Express. pp. 1-5. ISSN 2405-9595. (In Press / Online First) (In Press / Online First)

Jothi Letchumy, Mahendra Kumar and Rashid, Mamunur and Musa, Rabiu Muazu and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2020) An evaluation of different fast fourier transform - transfer learning pipelines for the classification of wink-based EEG signals. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 1-7. ISSN 2637-0883. (Published)

Jui, Julakha Jahan and Mohd Ashraf, Ahmad and Muhammad Ikram, Mohd Rashid (2022) Metaheuristics algorithms to identify nonlinear Hammerstein model: A decade survey. Bulletin of Electrical Engineering and Informatics, 11 (1). pp. 454-465. ISSN 2089-3191. (Published)

Juliawati, Alias (2020) Role of aluminium on the microstructure and corrosion behaviour of magnesium prepared by powder metallurgy method. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (3). pp. 1-8. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Jun Haslinda, Shariffuddin and Jones, Mark Ian and Patterson, Darrell Alec (2013) Greener photocatalysts : Hydroxyapatite derived from waste mussel shells for the photocatalytic degradation of a model azo dye wastewater. Chemical Engineering Research and Design, 91 (9). pp. 1693-1704. ISSN 0263-8762. (Published)

Jupin, John Arthur and Sutikno, Tole and Mohd Arfian, Ismail and Mohd Saberi, Mohamad and Shahreen, Kasim and Deris, Stiawan (2019) Review of the machine learning methods in the classification of phishing attack. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1545-1555. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Juraidah, Ahmad and Mohd Rosli, Hainin and Ekarizan, Shaffie and Khairil Azman, Masri and Mohd Amin, Shaffi (2020) Effect of temperature on phase angle and dynamic modulus of asphalt mixtures using SPT. Materials Science Forum, 1007. pp. 99-104. ISSN 0255-5476. (Published)

K., Balakrishnan and N.F., Buang and Mohammad Adam, Adman (2022) Factors affecting construction productivity: comparative study between worker's nationality. UMP Research Series: Construction Engineering and Management, 1 (1). pp. 20-30. ISSN 978-967-2831-41-9. (Published)

K., Peddakapu and M. R., Mohamed and P., Srinivasarao and A. S., Veerendra and D. J., K. Kishore and P. K., Leung (2021) Review on automatic generation control strategies for stabilising the frequency deviations in multiarea power system. International Journal of Ambient Energy, 1969272. pp. 1-25. ISSN 0143-0750 (Print); 2162-8246 (Online). (Published)

K., Peddakapu and M. R., Mohamed and P., Srinivasarao and P.K, Leung (2021) Frequency stabilization in interconnected power system using bat and harmony search algorithm with coordinated controllers. Applied Soft Computing, 113 (107986). pp. 1-18. ISSN 1568-4946 (print); 1872-9681 (online). (Published)

K. A., Masri and Nur Syafiqah Shamimi, Mohd Zali and Putra Jaya, Ramadhansyah and Mazlan, Abu Seman and Mohd Rosli, Mohd Hasan (2022) The influence of nano titanium as bitumen modifier in stone mastic asphalt. Advances in Materials Science and Engineering, 2022 (4021618). pp. 1-19. ISSN 1687-8442. (Published)

K. T., Lee and D., Youventharan (2022) Shear Wave Velocity Measurements in Tropical Peat Using In-house Device. Construction, 2 (1). pp. 22-30. ISSN 2785-8731. (Published)

Kabbashi, Nassereldeen Ahmed and Firdaus, Abd-Wahab and Bahaaddin, Warqaa Muhammed and Musa, Lubna Muhamed and Nour, Abdurahman Hamid and Qudsieh, Isam Yasseen (2022) Potential of low carbon nanotubes dosage on chromium removal from water. IIUM Engineering Journal, 23 (2). pp. 10-19. ISSN 1511-788X. (Published)

Kabiru Rogo, Usman and Mohd Rosli, Hainin and Mohd Khairul Idham, Mohd Satar and Muhammad Naqiuddin, Mohd Warid and Aliyu, Usman and Al-Saffar, Zaid Hazim and Bilema, Munder Abdullah (2021) A comparative assessment of the physical and microstructural properties of waste garnet generated from automated and manual blasting process. Case Studies in Construction Materials, 14 (e00474). pp. 1-17. ISSN 2214-5095. (Published)

Kadarohman, Asep and Khoerunnisa, Fitri and Syazwana, Sapee and Sardjono, Ratnaningsih Eko and Izuan, Izzudin and Hendrawan, . and R., Mamat and Ahmad Fitri, Yusop and Erdiwansyah, . and Yusaf, Talal (2021) The effect of oxygenated turpentine oil additive in diesel fuel on the performance and emission characteristics in one-cylinder di engines. Designs, 5 (4). pp. 1-17. ISSN 2411-9660. (Published)

Kadhem, Athraa Ali and Noor Izzri, Abdul Wahab and Ishak, Aris and Jasronita, Jasni and Abdalla, Ahmed N. and Matsukawa, Yoshiaki (2017) Reliability assessment of generating systems with wind power penetration via BPSO. International Journal on Advanced Science, Engineering and Information Technology, 7 (4). pp. 1248-1254. ISSN 2088-5334. (Published)

Kadirgama, Kumaran and Awad, Omar I. and Mohammed, M.N and Tao, Hai and Bash, Ali A. H. Karah (2023) Sustainable green energy management : Optimizing scheduling of multi-energy systems considered energy cost and emission using attractive repulsive shuffled frog-leaping. Sustainability, 15 (10755). pp. 1-19. ISSN 2071-1050. (Published)

Kalidasan, B. and Pandey, A. K. and Saidur, R. and Samykano, M. and Tyagi, V. V. (2023) Nano additive enhanced salt hydrate phase change materials for thermal energy storage. International Materials Reviews, 68 (2). pp. 140-183. ISSN 1743-2804. (Published)

Kalidasan, B. and Pandey, Adarsh Kumar and Saidur, Rahman Md and Yadav, Aman and Samykano, Mahendran and Tyagi, Vineet Veer (2022) Graphene–silver hybrid nanoparticle based organic phase change materials for enhanced thermal energy storage. Sustainability (Switzerland), 14 (13240). pp. 1-16. ISSN 2071-1050. (Published)

Kamal Zuhairi, Zamli and Din, Fakhrud and Alhadawi, Hussam S. (2023) Exploring a Q-learning-based chaotic naked mole rat algorithm for S-box construction and optimization. Neural Computing and Applications, 35 (14). pp. 10449-10471. ISSN 0941-0643. (Published)

Kamal Zuhairi, Zamli and Din, Fakhrud and Alhadawi, Hussam S. and Khalid, Shah and Alsolai, Hadeel and Nour, Mohamed K. and Al-Wesabi, Fahd N. and Assam, Muhammad (2023) Exploiting an Elitist Barnacles Mating Optimizer implementation for substitution box optimization. ICT Express, 9 (4). pp. 619-627. ISSN 2405-9595. (Published)

Kamaliah, Abdul Samad and Norazwina, Zainol and Hafizuddin, Wan Yussof and Zulsyazwan, Ahmad Khushairi and Nurul Shareena Aqmar, Mohd Sharif and Nur Syahirah, Mohd Syukri (2020) Isolation, identification and characterization of soil bacteria for the production of ferulic acid through co-culture fermentation using banana stem waste. SN Applied Sciences, 2 (3). pp. 1-12. ISSN 2523-3971. (Published)

Kamil Zakwan, Mohd Azmi and Ahmad Shahrizan, Abdul Ghani and Zulkifli, Md. Yusof and Zuwairie, Ibrahim (2019) Natural-based underwater image color enhancement through fusion of swarm-intelligence algorithm. Applied Soft Computing, 85 (105810). pp. 1-19. ISSN 1568-4946 (print); 1872-9681 (online). (Published)

Kaniz, Farhana and Kumaran, Kadirgama and Mahamude, Abu Shadate Faisal and Mushfika, Tasnim Mica (2022) Energy consumption, environmental impact, and implementation of renewable energy resources in global textile industries: an overview towards circularity and sustainability. Materials Circular Economy, 4 (15). ISSN 2524-8154. (Published)

Karim, Kaykobad Md. Rezaul and Tarek, Mostafa and Ong, Huei Ruey and Hamidah, Abdullah and Yousuf, Abu and Cheng, C. K. and Khan, Maksudur R. (2018) Photoelectrocatalytic Reduction of Carbon Dioxide to Methanol Using CuFe2O4 Modified with Graphene Oxide under Visible Light Irradiation. Industrial & Engineering Chemistry Research, 58 (2). pp. 563-572. ISSN 1520-5045. (Published)

Kasma Diana, Saharuddin and Mohd Hatta, Mohammed Ariff and Bahiuddin, Irfan and Nurhazimah, Nazmi and Mohd Azizi, Abdul Rahman and Mohd Ibrahim, Shapiai and Fauzan, Ahmad and Sarah Atifah, Saruchi (2024) A comparative study on various ANN optimization algorithms for magnetorheological elastomer carbonyl iron particle concentration estimation. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 124-133. ISSN 2756-8210. (Published)

Kassem, Mukhtar A. and Afiqah R., Radzi and Pradeep, Asankha and Algahtany, Mohammed and Abdul Rahimi, Abdul Rahman (2023) Impacts and response strategies of the COVID-19 pandemic on the construction industry using structural equation modeling. Sustainability (Switzerland), 15 (2672). pp. 1-24. ISSN 2071-1050. (Published)

Kauthar, Mohd Daud and Ananda, Ridho and Suhaila, Zainudin and Chan, Weng Howe and Moorthy, Kohbalan and Nurul Izrin, Md Saleh (2023) Optimizing the production of valuable metabolites using a hybrid of constraint-based model and machine learning algorithms : A review. International Journal of Advanced Computer Science and Applications, 14 (10). pp. 1091-1105. ISSN 2158-107X. (Published)

Kazem, Shahverdi and Gholamhassan, Najafi and Rizalman, Mamat and Mohd Fairusham, Ghazali and A.S., EI-Shafy and Mohamed, Mousa (2023) Introducing a design procedure for Archimedes Screw Turbine based on optimization algorithm. Energy for Sustainable Development, 72. pp. 162-172. ISSN 0973-0826. (Published)

Kee, T. K. and Cheok, C. J. and M. A. Amzar, Kamarudin and Saffuan, Wan Ahmad and Suryanti, Reni (2023) Seismic Effect of the Offshore Structure Under Different Earthquake Loadings. International Journal of Integrated Engineering, 15 (1). pp. 256-262. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Keng, Ngui Wai and Mohd Salman, Leong and Mohd Ibrahim, Shapiai and Hee, Lim Meng (2023) Blade fault localization with the use of vibration signals through artificial neural network: a data-driven approach. Pertanika Journal of Science and Technology, 31 (1). pp. 51-68. ISSN 0128-7680. (Published)

Khadijah Husna, Abd Hamid and Azilah, Ajit and Azren Aida, Asmawi and Mohd Hafiz, Arzmi and Nurul Aini, Mohd Azman (2024) Physicochemical properties of films from semirefined carrageenan/TiO2 integrated with cinnamaldehyde pickering emulsion for active food packaging. Journal of Research Updates in Polymer Science, 13. pp. 1-10. ISSN 1929-5995. (Published)

Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi and Fitriyana, Deni Fajar and Widodo, Rahmat Doni and Ismail, Rifky and Irawan, Agustinus Purna and Cionita, Tezara and Siregar, Januar Parlaungan and Nur Hidayah, Ismail (2023) A Study on Characteristics of Brake Pad Composite Materials by Varying the Composition of Epoxy, Rice Husk, Al2O3, and Fe2O3. Automotive Experiences, 6 (2). pp. 303-319. ISSN 2615-6202. (Published)

Khair, Nazmus Sakib and Nurhafizah, Abu Talip Yusof and Yasmin, Abdul Wahab and Bari, Bifta Sama and Nur Idayu, Ayob and Maizatul, Zolkapli (2023) Substrate-integrated waveguide (SIW) microwave sensor theory and model in characterising dielectric material : A review. Sensors International, 4 (100244). pp. 1-10. ISSN 2666-3511. (Published)

Khairatun Najwa, Mohd Amin and Hosseinmardi, Alireza and Martin, Darren J. and Annamalai, Pratheep K. (2022) A mixed acid methodology to produce thermally stable cellulose nanocrystal at high yield using phosphoric acid. Journal of Bioresources and Bioproducts, 7 (2). pp. 99-108. ISSN 2369-9698. (Published)

Khairool Azizul, Mohammad and Wei, Michelle Ho Siaw and Engku Nuraishah Huda, Engku Zainudin and Syarifah, Abd Rahim (2024) Impact of the SAC : CBZ ratio on polymorphic transformation and morphology of carbamazepine-saccharin co-crystals using fast cooling crystallization. Journal of Thermal Analysis and Calorimetry. pp. 1-13. ISSN 1388-6150. (In Press / Online First) (In Press / Online First)

Khairul, Mohd Arshad and Muhamad, Mat Noor and Asrulnizam, Abd Manaf and Kawarada, Hiroshi and Falina, Shaili and Mohd, Syamsul (2022) A comparative modelling study of new robust packaging technology 1mm2 VCSEL packages and their mechanical stress properties. Micromachines, 13 (1513). pp. 1-15. ISSN 2072-666X. (Published)

Khairul, Mohd Arshad and Muhamad, Mat Noor and Asrulnizam, Abd Manaf and Kawarada, Hiroshi and Shaili Falina, Mohd Sukri and Mohd Nasyriq, Syamsul (2022) A comparative modelling study of new robust packaging technology 1 mm2 VCSEL packages and their mechanical stress properties. Micromachines, 13 (1513). pp. 1-15. ISSN 2072-666X. (Published)

Khairul Anuar, Shahid and Bunnori, N. Muhammad and Megat Johari, M. A. and Hassan, M. H. and Sani, Ashiru (2020) Assessment of corroded reinforced concrete beams: Cyclic load test and acoustic emission techniques. Construction and Building Materials, 233 (117291). pp. 1-13. ISSN 0950-0618. (Published)

Khairul Anuar, Shahid and M. F. M., Jaafar and F. M., Yahaya (2014) Self-Healing Behaviour of Pre-Cracked Pofa-Concretes in Different Curing Conditions. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1227-1235. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Khairul Anuar, Shahid and Vignesh, Ganesh and Norhaiza, Ghazali (2024) The incorporation of spent coffee grounds as an additive in cement ventilation blocks. The Open Civil Engineering Journal, 18 (e18741495286280). pp. 1-12. ISSN 1874-1495. (Published)

Khairul Firdaus, Anuar and Nurhaizan, Mohd Zainudin and Muhammad Ashraf, Fauzi (2024) A content validity: Organisational performance’s assessment instrument in the construction industry. Built Environment Journal (BEJ), 21 (2). pp. 141-158. ISSN 2637-0395. (Published)

Khairul Zahreen, Mohd Arof and Syuhaida, Ismail and Chitdrakantan, Subramaniam and Shamila, Azman and Wan Nurul Mardiah, Wan Mohd Rani and Muhammad Farhan, Zolkepli (2020) Critical strategies for construction players in the adoption of biophilic city concept in Malaysia. Planning Malaysia: Journal of the Malaysian Institute of Planners, 18 (1). pp. 181-192. ISSN 0128-0945. (Published)

Khairulnadzmi, Jamaluddin and Sharifah Rafidah, Wan Alwi and Zainuddin, Abdul Manan and Khaidzir, Hamzah and Klemeš, Jiří Jaromír and Roziah, Zailan (2022) Optimal nuclear trigeneration system considering life cycle costing. Journal of Cleaner Production, 370 (133399). pp. 1-20. ISSN 0959-6526. (Published)

Khairun Najihah, Kamarudin and Nurmunira, Muhammad and Namdar, Abdoullah (2024) Design of industrial Mg-Rich gypsum waste with concrete waste aggregate for compressibility of problematic soil. Journal of Advanced Research in Applied Mechanics, 116 (1). pp. 103-116. ISSN 2289-7895. (Published)

Khairunisa, Muthusamy and Mohd Warid, Hussin and Fadhadli, Zakaria (2010) Effect of Mixing Constituent toward Engineering Properties of POFA Cement-Based Aerated Concrete. Journal of Materials in Civil Engineering , 22 (4). pp. 287-295. ISSN 0899-1561. (Published)

Khairunisa, Muthusamy and N. A., Zulkepli and Fadzil, Mat Yahaya (2013) Exploratory Study of Oil Palm Shell as Partial Sand Replacement in Concrete. Research Journal of Applied Sciences, Engineering and Technology, 5 (7). pp. 2372-2375. ISSN 2040-7459. (Published)

Khairunisa, Muthusamy and Vesuvapateran, Gopi and Norul Wahida, Kamaruzaman (2014) Acid Resistance of Concrete Containing Laterite Aggregate as Partial Coarse Aggregate Replacement. Research Journal of Applied Sciences, Engineering and Technology, 7 (19). pp. 3983-3985. ISSN 2040-7459. (Published)

Khairunisa, Muthusamy and Abidatul Munawwarah, Kamaruzaman and Hanis Nadiah, Ruslan and Mohammed A., Ismail (2023) Properties of sustainable concrete consisting crushed eggshell waste as fine aggregate replacement. Construction, 3 (2). 207 -214. ISSN 2785-8731. (Published)

Khairunisa, Muthusamy and El Gelany, Mohamed Ismail and Budiea, Ahmed Mokhtar and Hussin, Mohd Warid (2010) Effect of POFA Fineness on Durability of High Strength Concrete. The Indian Concrete Journal, 84 (11). pp. 21-27. ISSN 0019-4565. (Published)

Khairunisa, Muthusamy and M. F. S., Ali and M. N. A. A. , Zawawi and N., Nordin and Sharifah Maszura, Syed Mohsin and Nur Farhayu, Ariffin (2017) Palm Oil Clinker: A Potential Partial Sand Replacement In Brick Production. International Journal of Civil Engineering and Geo-Environmental, Sp. (NCWE). pp. 132-136. ISSN 2180-2742. (Published)

Khairunisa, Muthusamy and Mirza, Jahangir and Nur Azzimah, Zamri and Mohd Warid, Hussin and Anwar, P. P. Abdul Majeed and Kusbiantoro, Andri and Budiea, Ahmed Mokhtar Albshir (2019) Properties of high strength palm oil clinker lightweight concrete containing palm oil fuel ash in tropical climate. Construction and Building Materials, 199. pp. 163-177. ISSN 0950-0618. (Published)

Khairunisa, Muthusamy and Mohamad Hafizuddin, Rasid and Jokhio, Gul Ahmed and Budiea, Ahmed Mokhtar Albshir and Mohd Warid, Hussin and Mirza, Jahangir (2020) Coal bottom ash as sand replacement in concrete: a review. Construction and Building Materials, 236 (117507). pp. 1-12. ISSN 0950-0618. (Published)

Khairunisa, Muthusamy and Mohd Warid, Hussin (2010) Fire Resistance Properties of Palm Oil Fuel Ash Cement Based Aerated Concrete. Concrete Research Letters, 1 (3). pp. 107-114. ISSN 2180-1371. (Published)

Khairunisa, Muthusamy and Muhammad Azreen, Ibrahim and Nor Hazurina, Othman and Budiea, Ahmed Mokhtar Albshir and Saffuan, Wan Ahmad (2018) Properties of sand cement brick containing ground palm oil fuel ash as fine aggregate replacement. Challenge Journal of Concrete Research Letters, 9 (3). pp. 71-74. ISSN 2548-0928. (Published)

Khairunisa, Muthusamy and Norhaiza, Nordin and G., Vesuvapateran and M., Ali and N. A., Mohd Annual and H., Harun and H., Ullap (2014) Exploratory Study of Rubber Seed Shell as Partial Coarse Aggregate Replacement in Concrete. Research Journal of Applied Sciences, Engineering and Technology, 7 (6). pp. 1013-1016. ISSN 2040-7459. (Published)

Khairunisa, Muthusamy and Norul Wahida, Kamaruzaman (2012) Assessment of Malaysian Laterite Aggregate in Concrete. International Journal of Civil & Environmental Engineering, 12 (4). pp. 83-86. ISSN 2077-1258 (Online); 2227-2763 (Print). (Published)

Khairunisa, Muthusamy and Norul Wahida, Kamaruzaman and Mohamed A., Ismail and A. M. A., Budiea (2015) Durability Performance of Concrete Containing Laterite Aggregates. KSCE Journal of Civil Engineering. pp. 1-8. ISSN 1226-7988 (Print); 1976-3808 (Online). (In Press / Online First) (In Press / Online First)

Khairunisa, Muthusamy and Norul Wahida, Kamaruzaman and Mohammad Amirulkhairi, Zubir and Mohd Warid, Hussin and Abdul Rahman, Mohd Sam and Ahmed, Budiea (2015) Long Term Investigation on Sulphate Resistance of Concrete Containing Laterite Aggregate. Procedia Engineering, 125. pp. 811-817. ISSN 1877-7058. (Published)

Khairunisa, Muthusamy and Norul Wahida, Kamaruzaman and Saffuan, Wan Ahmad and Fadzil, Mat Yahaya (2015) Study on Durability Performance of Concrete Containing Laterite Aggregates. Concrete Research Letters, 6 (2). pp. 60-68. ISSN 2180-1371. (Published)

Khairunisa, Muthusamy and Nur Azzimah, Zamri (2014) Exploratory Study of Palm Oil Fuel Ash as Partial Cement Replacement in Oil Palm Shell Lightweight Aggregate Concrete. Research Journal of Applied Sciences, Engineering and Technology, 8 (2). pp. 150-152. ISSN 2040-7459. (Published)

Khairunisa, Muthusamy and Nur Azzimah, Zamri (2015) Mechanical Properties of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash as Partial Cement Replacement. KSCE Journal of Civil Engineering, 00. pp. 1-9. ISSN 1226-7988 (Print); 1976-3808 (Online). (Published)

Khairunisa, Muthusamy and Nur Azzimah, Zamri (2015) Short Term Investigation on Sulphate Resistance of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash as Partial Cement Replacement. Research Journal of Applied Sciences, Engineering and Technology, 10 (1). pp. 91-94. ISSN 2040-7459. (Published)

Khairunisa, Muthusamy and Nur Azzimah, Zamri and Andri, Kusbiantoro (2018) Effect of mixing ingredient on workability and compressive strength of palm oil clinker lightweight concrete containing palm oil fuel ash. Challenge Journal of Concrete Research Letters, 9 (4). pp. 110-113. ISSN 2548-0928. (Published)

Khairunisa, Muthusamy and Nur Azzimah, Zamri and Iqbal, Mohd Haniffa and Noor Nabilah, Sarbini and Fadzil, Mat Yahaya (2015) Acid Resistance of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash. Applied Mechanics and Materials, 754. pp. 326-330. ISSN 1662-7482. (Published)

Khairunisa, Muthusamy and Nur Farah Aziera, Jamaludin and Mohd Faizal, Md Jaafar and Ahmed Mokhtar Albshir, Budiea and Mohamed A., Ismail (2022) Compressive Strength of Palm Oil Lightweight Aggregate Concrete Containing Industrial Waste as Partial Sand Replacement. Materials Science Forum, 1056. pp. 55-60. ISSN 1662-9752. (Published)

Khairunisa, Muthusamy and Nurul Adha, Sabri (2012) Cockle Shell: A Potential Partial Coarse Aggregate Replacement in Concrete. International Journal of Science, Environment and Technology, 1 (4). pp. 260-267. ISSN 2277-663X (Print); 2278-3687 (Online). (Published)

Khairunisa, Muthusamy and Nurul Nadrah Aqilah, Tukimat (2016) Exploratory Study on the Use of Crushed Cockle Shell as Partial Sand Replacement in Concrete. International Journal of Research in Engineering and Science, 4 (2). pp. 67-71. ISSN 2320-9356. (Published)

Khairunisa, Muthusamy and Rahimah, Embong and Nabilla, Mohamad and Nur Syahira Hanim, Kamarul Bahrin and Fadzil, Mat Yahaya (2021) Setting time and compressive strength of mortar containing cockle shell powder as partial cement replacement. Key Engineering Materials, 879. pp. 62-67. ISSN 1662-9795. (Published)

Khalid, Adam and Izzeldin, I. Mohd and Ibrahim, Younis (2021) Analyzing the instructions vulnerability of dense convolutional network on GPUS. International Journal of Electrical and Computer Engineering (IJECE), 11 (5). pp. 4481-4488. ISSN 2088-8708 (Print); 2722-2578 (Online). (Published)

Khalifa, N. A. and A., Zulkiple and Ogab, Mohammed (2020) The impact of different road damage factors on the pavement of local roads (JKR U2/U3) in Malaysia. International Journal of Pavement Research and Technology. pp. 1-7. ISSN 1996-6814. (In Press / Online First) (In Press / Online First)

Khalifa, Nasradeen A. and A., Zulkiple and H. F., Suhandri (2019) Factors influencing local road (JKR U2/U3) damage in Malaysia. Jordan Journal of Civil Engineering, 13 (4). pp. 609-622. ISSN 1993-0461. (Published)

Khamisa, Abdul Hamid and Wan Azmi, Wan Hamzah and Mohd Yusof, Taib and Mohd Farid, Ismail and Anwar Ilmar, Ramadhan (2022) Rheological properties of TiO2/POE nanolubricant for automotive air conditioning system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (1). pp. 10-22. ISSN 2289-7879. (Published)

Khan, Burhan Ul Islam and Anwar, Farhat and Farah Diyana, Abdul Rahman and Olanrewaju, Rashidah Funke and Goh, Khang Wen and Zuriati, Janin and Rahman, Md Arafatur (2022) SGM : Strategic game model for resisting node misbehaviour in IoT-cloud ecosystem. Information (Switzerland), 13 (544). pp. 1-19. ISSN 2078-2489. (Published)

Khan, Nida and Sudhakar, Kumarasamy and Rizalman, Mamat (2024) Eco-friendly nutrient from ocean : Exploring Ulva seaweed potential as a sustainable food source. Journal of Agriculture and Food Research, 17 (101239). pp. 1-18. ISSN 2666-1543. (Published)

Khan, Nida and Sudhakar, Kumarasamy and Rizalman, Mamat (2024) Macroalgae farming for sustainable future : Navigating opportunities and driving innovation. Heliyon, 10 (e28208). pp. 1-28. ISSN 2405-8440. (Published)

Khan, Nida and Sudhakar, Kumarasamy and Rizalman, Mamat (2023) Seaweed farming : A perspectives of genetic engineering and nano-technology application. Heliyon, 9 (e15168). pp. 1-13. ISSN 2405-8440. (Published)

Khir, Hazim and Pandey, Adarsh Kumar and Saidur, Rahman Md and Muhammad, Shakeel Ahmad and Nasrudin, Abd Rahim and Dewika, M. and Samykano, Mahendran (2022) Recent advancements and challenges in flexible low temperature dye sensitised solar cells. Sustainable Energy Technologies and Assessments, 53 (102745). pp. 1-23. ISSN 2213-1388. (Published)

Khir, Hazim and Pandey, Adarsh Kumar and Saidur, Rahman Md and Muhammad Shakeel, Ahmad and Nasrudin, Abd Rahim and Dewika, M. and Samykano, Mahendran (2023) Improved charge transfer through the minimal addition of Pb as a sintering aid to TiO2-based low-temperature dye sensitised solar cell. Ceramics International, 49 (11). 17620 -17628. ISSN 0272-8842. (Published)

Kho, Yap Bing and Hussanan, Abid and Muhammad Khairul Anuar, Mohamed and Mohd Zuki, Salleh (2019) Heat and mass transfer analysis on flow of Williamson nanofluid with thermal and velocity slips: Buongiorno model. Propulsion and Power Research, 8 (3). pp. 243-252. ISSN 2212-540X. (Published)

Khodapanah, Nasrin and N., Syairah and Mohd Mustaqim, . and Syed Mahmood, . (2023) Emulsifying Properties of Proteins Extracted from Jatropha curcas L. to Harvest Chlorella vulgaris sp. Microalgae. Ecology, Environment and Conservation, 29 (2). pp. 935-939. ISSN 0971-765X. (Published)

Khong, S. C. and Yee, J. J. and Doh, S. I. and Chin, S. C. (2022) A review of agro-potential waste as a constituent in railway sleepers. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103238). p. 1. ISSN 1474-7065. (Published)

Khong, Sheh Ching and Chin, Siew Choo (2024) Potential utilization of spent coffee waste in permeable concrete. The Open Construction & Building Technology Journal, 18. pp. 1-15. ISSN 1874-8368. (Published)

Khoo, Pui San and Shukur, Abu Hassan and Ahmad Ilyas, Rushdan and Quanjin, Ma and Reby, Roy K.E. and M, Mubarak Ali and Loganathan, T. G. and Adhiguna, Rizky Tirta (2023) Compressive behaviour of tin slag polymer concrete confined with glass fibre reinforced epoxy under various loading speeds. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Khoo, Yingsiew and Nadiene Salleha, Mohd Nawi and Liang, Yong Yeow and Sim, Ling Kai and Lau, Woei Jye and Thamaraiselvan, Chidambaram (2024) Surface modification of NF membrane via an environmentally friendly and rapid approach for desalination Process: performance and stability evaluation. Separation and Purification Technology, 329 (125119). pp. 1-9. ISSN 1383-5866. (Published)

Khor, Ai Chia and Mohd Rusllim, Mohamed and K. F., Chong and P. K., Leung (2018) Electrochemical studies on Alizarin Red S as Negolyte for Redox Flow Battery: A Preliminary Study. International Journal of Engineering & Technology, 7 (4.35). 375- 377. ISSN 2227-524X. (Published)

Khudhair, Zahraa S. and Zubaidi, Salah L. and Dulaimi, Anmar and Al-Bugharbee, Hussein and Muhsen, Yousif Raad and Putra Jaya, Ramadhansyah and Mohammed Ridha, Hussein and Raza, Syed Fawad and Ethaib, Saleem (2024) Metaheuristic algorithms applied in ANN salinity modelling. Results in Engineering, 23 (102541). pp. 1-10. ISSN 2590-1230. (Published)

Kim, Kate and Hourfar, Farzad and Abdul Halim, Abdul Razik and Rizwan, Muhammad and Almansoori, Ali and Fowler, Michael W. and Elkamel, Ali (2023) Importance of microalgae and municipal waste in bioenergy products hierarchy—integration of biorefineries for microalgae and municipal waste processing : A review. Energies, 16 (6361). pp. 1-39. ISSN 1996-1073. (Published)

King, Sze Soon and Rahimi, A. Rahman and Muhammad Ashraf, Fauzi and Ahmad Tarmizi, Haron (2022) Critical analysis of pandemic impact on AEC organizations: The covid-19 case. Journal of Engineering, Design and Technology, 20 (1). pp. 358-383. ISSN 1726-0531. (Published)

Kirpichnikova, I.M. and Sudhakar, K. and Makhsumov, I.B. and Martyanov, A.S. and ShanmugaPriya, S. (2022) Thermal model of a photovoltaic module with heat-protective film. Case Studies in Thermal Engineering, 30. pp. 1-10. ISSN 2214-157X. (Published)

Kishore, D. J. Krishna and Mohamed, M. R. and Jewaliddin, S. K. and Peddakapu, K. and Srinivasarao, P. (2022) Cost regulation and power quality enhancement for PV-wind-battery system using grasshopper optimisation approach. International Journal of Ambient Energy, 43 (1). 8763 -8774. ISSN 0143-0750 (Print); 2162-8246 (Online). (Published)

Kishore, D. J. Krishna and Mohamed, M. R. and Sudhakar, K. and Peddakapu, K. (2022) Grey wolf optimization and differential evolution-based maximum power point tracking controller for photovoltaic systems under partial shading conditions. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44 (3). 6286 -6302. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Kit, Tam Jun and Sarah ‘Atifah, Saruchi and Nurhaffizah, Hassan and Nor Aziyatul, Izni (2023) Cyclist fall detection system via the internet of things (IoT). International Journal of Computing and Digital Systems, 13 (1). pp. 1025-1033. ISSN 2210-142X. (Published)

Koay, B. K. and Mohd Fakhrurrazi, Ishak and M. S. I., Zaini and M. F., Zolkepli (2018) Investigation and monitoring of groundwater level: building crack near to IIUM Kuantan. International Journal of Engineering Technology And Sciences (IJETS), 5 (3). pp. 51-56. ISSN 2289-697X. (Published)

Kobayashi, Ikkei and Kuroda, Jumpei and Uchino, Daigo and Ogawa, Kazuki and Ikeda, Keigo and Kato, Taro and Endo, Ayato and Peeie, Mohamad Heerwan and Narita, Takayoshi and Kato, Hideaki (2023) Research on yaw moment control system for race cars using drive and brake torques. Vehicles, 5 (2). pp. 1-20. ISSN 2624-8921. (Published)

Kobayashi, Ikkei and Ogawa, Kazuki and Uchino, Daigo and Ikeda, Keigo and Kato, Taro and Endo, Ayato and Mohamad Heerwan, Peeie and Narita, Takayoshi and Kato, Hideaki A basic study on hybrid systems for small race car to improve dynamic performance using lap time simulation. Actuators, 11 (7). pp. 1-17. ISSN 2076-0825. (Published)

Koondhar, Mohsin Ali and Laghari, Imtiaz Ali and Asfaw, Belay Million and Reji Kumar, Rajamony and Lenin, A. Haiter (2022) Experimental and simulation-based comparative analysis of different parameters of PV module. Scientific African, 16 (e01197). pp. 1-16. ISSN 2468-2276. (Published)

Krishnan, Santhana and Mohd, Nasrullah and Kamyab, Hesam and Noor, Suzana and Mimi Sakinah, Abdul Munaim and Zularisam, Abdul Wahid and Ali, Ismat Hassan and Salehi, Reza and Chaiprapat, Sumate S. (2022) Fouling characteristics and cleaning approach of ultrafiltration membrane during xylose reductase separation. Bioprocess and Biosystems Engineering, 45 (7). pp. 1125-1136. ISSN 1615-7591. (Published)

Krishnan, Santhana and Mohd, Nasrullah and Saravanan, Prabhu and Mohd Fadhil, Md Din (2024) Bioprocess designing towards clean energy production from industrial wastewater. Frontiers in Chemical Engineering, 6 (1412081). pp. 1-4. ISSN 2673-2718. (Published)

Krishnan, Santhana and Nor Syahidah, Zulkapli and Mohd Fadhil, Md Din and Zaiton, Abd Majid and Honda, Mitsuhiro and Ichikawa, Yo and Fadzlin, Md Sairan and Mohd Nasrullah, Zulkifli and Nickholas Anting, Anak Guntor (2019) Statistical optimization of titanium recovery from drinking water treatment residue using response surface methodology. Journal of Environmental Management, 255 (109890). ISSN 0301-4797. (Published)

Krishnasamy, Kirrthana and Mohd Asraff, Asmadi and Nor Aishah Saidina, Amin and Muzakkir Mohammad, Mohammad Zainol and Zaki Yamani, Zakaria and Sureena, Abdullah (2023) One-pot liquefaction of cellulose to ethyl levulinate via 1-sulfonic acid-3-methyl imidazolium trichlorozincate as Brønsted-Lewis catalyst. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Kristanti, Risky Ayu and Mardarveran, Priyatharishini and Almaary, Khalid Salmeen and Elshikh, Mohammad Soliman and AbdelGawwad, Mohamed Ragab and Tang, Kuok Ho Daniel (2023) Phytoremediation of bauxite wastewater potentiality by Jatropa curcas. Bioprocess and Biosystems Engineering, 46 (3). pp. 373-379. ISSN 1615-7591. (Published)

Kumar, Harish and Soh, Ping Jack and Mohd Arfian, Ismail (2022) Big data streaming platforms : A review. Iraqi Journal for Computer Science and Mathematics, 3 (2). pp. 95-100. ISSN 2788-7421. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2016) Bioelectricity Generation and Treatment of Sugar Mill Effluent Using a Microbial Fuel Cell. Journal of Clean Energy Technologies, 4 (4). pp. 249-252. ISSN 1793-821X. (Published)

Kunji, Ahmad Kamal and Ali, Nasly Mohamed and Zulkiple, Adnan Safety recovery zone corridor for malaysian roads derived from live field experiments. Proceedings of International Seminar Slope and Road Foundation Drainage and Stormwater Management. (Published)

Kunji, Ahmad Kamal and Kusbiantoro, Andri and Zulkiple, Adnan and Ramli, Harzah M (2018) Roadside safety recovery zone corridor widths derived from live field experiments and comparison to past accidents records. International Journal of Engineering Technology And Sciences (IJETS), 5 (3). pp. 105-117. ISSN 2289-697X. (Published)

Kunji, Ahmad Kamal and Kusbiantoro, Andri and Zulkiple, Adnan and Ramli, Harzah M. (2018) Characteristic of safety recovery zone and roadside hazard cases in malaysia road: A review. International Journal of Engineering Technology And Sciences (IJETS), 5 (3). pp. 90-104. ISSN 2289-697X. (Published)

Kurniawan, Tedi and Anwar, M. A. and Oktiani, R. and Ragadhita, R. and Nandiyanto, A. B. D. and Aziz, M. (2019) Influences of solvent types on the formation of graphene in the electrochemical exfoliation method. Materials Physics and Mechanics, 42 (2019). pp. 151-157. ISSN 1605-8119. (Published)

Kusbiantoro, Andri and Norbaizurah, Rahman (2015) Investigation on the Degree of Reaction and Strength Performance of Fly Ash Based Geopolymer Binder with Alternnative Chemical Reagents. Materials Science Forum, 803. pp. 115-119. ISSN 0255-5476. (Published)

Kusbiantoro, Andri and Norbaizurah, Rahman and Noor Fifinatasha, Shahedan (2014) Interrelationship Analysis of Geopolymer Components using Pearson Correlation Technique. Applied Mechanics and Materials, 567. pp. 417-421. ISSN 1662-7482. (Published)

Kusbiantoro, A. and A. H., Ismail and S. K., Jema'in and Khairunisa, Muthusamy and F. F., Zainal (2023) Infrared imaging as a non-destructive testing method for geopolymer concrete. Archives of Metallurgy & Materials, 68 (3). pp. 1047-1052. ISSN 1733-3490. (Published)

Kusbiantoro, Andri and Norbaizurah, Rahman and Chin, Siew Choo and Aji, Ridho Bayu (2016) Effect of Poly (Ethylene-Co-Vinyl Acetate) as a Self-Healing Agent in Geopolymer Exposed to Various Curing Temperatures. Materials Science Forum, 841. pp. 16-20. ISSN 0255-5476. (Published)

Kusbiantoro, Andri and Rahimah, Embong and Nasir, Shafiq and Muhd Fadhil, Nuruddin (2016) Strength and Microstructural Properties of Fly Ash Based Geopolymer Concrete Containing High-Calcium and Water-Absorptive Aggregate. Journal of Cleaner Production, 112 (Prt 1.). pp. 816-822. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

L. H., Shah and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2020) Influence of tool offsetting and base metal positioning on the material flow of AA5052-AA6061 dissimilar friction stir welding. Journal of Mechanical Engineering and Sciences (JMES), 14 (1). pp. 6393-6402. ISSN 2231-8380 (online). (Published)

L. H., Shah and N., Huda and Esmaeili, S. and Walbridge, S. and Gerlich, A. P. (2020) Structural morphology of Al-Mg-Si alloy friction stir welds through tool eccentricity. Materials Letters, 275 (128098). pp. 1-4. ISSN 0167-577X. (Published)

L. Provis, John and Putra Jaya, Ramadhansyah and Napoli, Annalisa and Kanellopoulos, Antonios (2024) Editorial: 2022 Retrospective: structural materials. Frontiers in Materials, 11. pp. 1-2. ISSN 22968016. (Published)

Laghari, Imtiaz Ali and M., Samykano and A.K., Pandey and K., Kadirgama and Mishra, Yogeshwar Nath (2022) Binary composite (TiO2-Gr) based nano-enhanced organic phase change material: Effect on thermophysical properties. Journal of Energy Storage, 51 (104526). (Published)

Laghari, Imtiaz Ali and Pandey, Adarsh Kumar and Samykano, Mahendran and Aljafari, Belqasem and Kadirgama, Kumaran and Sharma, Kamal Kant and Tyagi, Vineet Veer (2023) Thermal energy harvesting of highly conductive graphene‑enhanced parain phase change material. Journal of Thermal Analysis and Calorimetry, 148 (18). pp. 9391-9402. ISSN 1388-6150. (Published)

Lai, Kok Yee and Tan, Lit Ken and Asako, Yutaka and Lee, Kee Quen and Chuan, Zun Liang and Wan Nur Syahidah, Wan Yusoff and Homma, Koji and Arada, Gerald Pacaba and Gan, Yee Siang and Tey, Wah Yen and Kong, Calvin Leng Sing and Kamadinata, Jane Oktavia and Taguchi, Akira (2019) Cloud optical depth retrieval via sky’s infrared image for solar radiation prediction. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). pp. 1-14. ISSN 2289-7879. (Published)

Lau, N. Jun and Mahadi, Bahari and Pham, T. T. Phuong and Nguyen, Huu Huy Phuc and Chanatip, Samart and Bawadi, Abdullah and Setiabudi, H. D. and Vo, Dai-Viet N. (2018) Ethylene glycol dry reforming for syngas generation on Ce‑promoted Co/Al2O3 catalysts. Applied Petrochemical Research, 8 (4). pp. 253-261. ISSN 2190-5533. (Published)

Lee, Chia Kuang and Bujna, Marián and Ahmad Huzaimi, Abd Jamil and Ee, Pei Theng (2023) A cause and effect of a nonpayment model based on the DEMATEL algorithm. Journal of Legal Affairs and Dispute Resolution in Engineering and Construction, 15 (1). pp. 1-12. ISSN 1943-4162. (Published)

Lee, Chia Kuang and Chong, Fui Yee and Liew, Siau-Chuin and Tay, Joo Hui and Toh, Tien Choon (2023) Critical Risk Factors in Construction Projects: A Dematel-Based Model. Malaysian Construction Research Journal (MCRJ), 18 (Sp. 1). pp. 168-188. ISSN 1985-3807. (Published)

Lee, Chia Kuang and Foo, Mei Yit (2020) Risk attitudes and the big five personality traits: A study on construction project practitioners in Malaysia. International Journal Of Construction Management. pp. 1-11. ISSN 1562-3599 (Print) 2331-2327 (Online). (Published)

Lee, Khai Loon and Shaharud-din, Afiq Muqri (2022) Procurement 4.0 and organizational performance in the Malaysian construction industry. International Journal of Service Science, Management, Engineering, and Technology (IJSSMET), 13 (1). pp. 1-22. ISSN 1947-959X. (Published)

Lee, Man Djun and Tang, Ridge Wei Cheong and Micheal, Zeno and Miqdad, Khairulmaini and Azmi, Roslan and Ahmad Faidzal, Khodori and Hazim, Sharudin and Lee, Pui San (2024) Physical and mechanical properties of light red meranti treated with boron preservatives. Journal of the Korean Wood Science and Technology, 52 (2). 157 -174. ISSN 1017-0715. (Published)

Lee, Ong Vienna and Heryanto, Ahmad and Mohd Faizal, Ab Razak and Anis Farihan, Mat Raffei and Eh Phon, Danakorn Nincarean and Shahreen, Kasim and Sutikno, Tole (2020) A malicious URLs detection system using optimization and machine learning classifiers. Indonesian Journal of Electrical Engineering and Computer Science, 17 (3). pp. 1210-1214. ISSN 2502-4752. (Published)

Lee, Z. P. and A. R., Rahimi and Doh, Shu Ing (2020) Key drivers for adopting design build: A comparative study between project stakeholders. Physics and Chemistry of the Earth, Parts A/B/C (102945). ISSN 1474-7065. (In Press / Online First) (In Press / Online First)

Lee, Zhen Ping and Rahimi, A. and Doh, Shu Ing (2020) Critical success factors for implementing design-build: analysing Malaysian Public Projects. Journal of Engineering, Design and Technology. ISSN 1726-0531. (In Press / Online First) (In Press / Online First)

Lee, Zheng Ping and Abdul Rahimi, Abdul Rahman and Doh, Shu Ing (2022) Application of decision support tool in design-build projects: A quasi-experiment with novice decision makers. Built Environment Project and Asset Management, ahead-of-pri. pp. 1-19. ISSN 2044-124X. (Published)

Leenaloshni, Joganathan and A., Zulkiple (2013) Walkway Subgrade Stabilization Using Fly Ash. Procedia Civil Engineering. (Published)

Li, Chaochao and Huang, Miansong and Tian, Juncang and Isabella Anak Gisen, Jacqueline (2022) Research and application of the mathematical model for extreme weather event in coastal urban areas. Physics and Chemistry of the Earth, 125 (103075). pp. 1-8. ISSN 1474-7065. (Published)

Li, X. and Doh, S. I. and Ho, Chia Min and Jing, G. and Ashraf, Teara (2022) The investigation on properties of sodium sulfate-activated mortar incorporating steel slag with various replacement ratio and particle size. Physics and Chemistry of the Earth, 127 (103241). pp. 1-7. ISSN 1474-7065. (Published)

Li, Xiaofeng and Doh, Shu Ing and Feng, Weiying and Albtoosh, Ja'far A. Aldiabat and Chong, Beng Wei (2020) The mechanical properties of concrete incorporating steel slag as supplementary cementitious material. Key Engineering Materials, 879. p. 81. ISSN 1013-9826 (print); 1662-9795 (online). (Submitted) (Submitted)

Li, Xiaofeng and Doh, Shu Ing and Jing, Guo Qing and Chong, Beng Wei and Suil, Adilen Lucia and Chin, Siew Choo (2021) A comparative review on American, European and Chinese standard for railway concrete sleeper. Physics and Chemistry of the Earth, Parts A/B/C, 124 (Part 2). pp. 1-6. ISSN 1474-7065. (Published)

Li, Zhang and M. N. A., Azman and Putra Jaya, Ramadhansyah (2023) Review on the treatment method to improve the strengthening of recycled aggregate concrete. Construction, 3 (1). pp. 135-141. ISSN 2785-8731. (Published)

Lichtfouse, Eric and Morin-Crini, Nadia and Fourmentin, Marc and Nascimento, Inara Oliveira Carmo do and Queiroz, Luciano Matos and Mohd Yuhyi, Mohd Tadza and Picos-Corrales, Lorenzo A. and Pei, Haiyan and Wilson, Lee D. and Crini, Grégorio (2019) Chitosan for direct bioflocculation of wastewater. Environmental Chemistry Letters. pp. 1-19. ISSN 1610-3661. (In Press / Online First) (In Press / Online First)

Liew, Nicole Siaw Ing and Cui Ming, Ng and Putra Jaya, Ramadhansyah and Muzamir, Hasan and Masri, K. A. and Abdul Hassan, Norhidayah and Mohamed Jaafar, Zul Fahmi and Nordiana, Mashros (2023) Influence of sawdust ash as filler in asphalt mixture. AIP Conference Proceedings, 2688 (020005). pp. 1-14. ISSN 0094-243X. (Published)

Liew, Nicole Siaw Ing and Ng, Cui Ming and Nur Syamimi Nabilah, Mohd Sori and Putra Jaya, Ramadhansyah and Khairil Azman, Masri (2023) Influence of aggregates shape on porous asphalt mixture. Construction, 3 (1). pp. 1-5. ISSN 2785-8731. (Published)

Liew, Yee Zhing and Abdul Majeed, Anwar P.P (2024) Formulation of a deep learning model for automated detection via segmentation of lung cancer. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 6 (1). pp. 114-119. ISSN 2637-0883. (Published)

Liew, Yu Xuan and Norliana, Bakar and Lim, Kar Sing and Doh, Shu Ing and Putra Jaya, Ramadhansyah and Chin, Siew Choo (2023) Shear Strengthening of Reinforced Concrete Beams Using GFRP. Open Civil Engineering Journal, 17 (e18741495221222). pp. 1-10. ISSN 1874-1495. (Published)

Liew, Yu Xuan and Putra Jaya, Ramadhansyah and Chin, Siew Choo (2023) Suitability of Using LA Abrasion Machine for the Nano Manufacturing of Palm Oil Fuel Ash and Incorporating in Mortar Mixture. The Open Civil Engineering Journal, 17 (2023). pp. 1-15. ISSN 1874-1495. (Published)

Lim, Kar Sing and Nordin, Yahaya and Jeom, Kee Paik and Norhazilan, Md Noor and Mohd Hairil, Mohd (2017) Effects Of Soil Properties On The Corrosion Progress Of X70-Carbon Steel In Tropical Region. Ships and Offshore Structures, 12 (7). pp. 991-1002. ISSN 1744-5302 (Print); 1754-212X (Online). (Published)

Lim, Kar Sing and Nordin, Yahaya and Valipour, Alireza and Zardasti, Libriati and Siti Nur Afifah, Azraai and Norhazilan, Md Noor (2018) Mechanical Properties Characterization and Finite Element Analysis of Epoxy Grouts in Repairing Damaged Pipeline. Journal of Pressure Vessel Technology, 140 (6). 061701-1. ISSN 0094-9930 (print); 1528-8978 (online). (Published)

Lim, Kar Sing and Siti Nor Fariza, Mior Mohd Tahir and Nordin, Yahaya and Norhazilan, Md Noor and Azlan, Abdul Rahman (2015) Underground Corrosion Model of Steel Pipelines Using In Situ Parameters of Soil. Journal of Pressure Vessel Technology, 137 (5). pp. 1-6. ISSN 0094-9930 (print); 1528-8978 (online). (Published)

Lim, Kar Sing and Siti Nur Afifah, Azraai and Nordin, Yahaya and Norhazilan, Md Noor and Zardasti, Libriati and Kim, Jang-Ho Jay (2019) Behaviour of steel pipelines with composite repairs analysed using experimental and numerical approaches. Thin-Walled Structures, 139. pp. 321-333. ISSN 0263-8231. (Published)

Lim, Kar Sing and Siti Nur Afifah, Azraai and Nordin, Yahaya and Zardasti, Libriati and Norhazilan, Md Noor (2017) Strength Development of Epoxy Grouts for Pipeline Rehabilitation. Jurnal Teknologi (Sciences and Engineering), 79 (1). pp. 9-14. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Lim, Wei Jie and Normaniha, Abd Ghani (2022) Covid-19 mandatory self-quarantine wearable device for authority monitoring with edge ai reporting & flagging system. Health and Technology, 12. pp. 215-226. ISSN 2190-7188 (printed), 2190-7196(Online). (Published)

Lin, Lijin and Ting, Irene Wei Kiong and Siti Zur Aainaa, Roslan and Asif, Jawad (2024) Exploring the effect of employee engagement on the social aspect of firm sustainability: Evidence from the Malaysian construction industry. International Journal of Industrial Management (IJIM), 18 (1). pp. 32-42. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Liu, Xinni and Kamarul Hawari, Ghazali and Han, Fengrong and Izzeldin Ibrahim, Mohamed Abdelaziz (2023) Review of CNN in aerial image processing. Imaging Science Journal, 71 (1). pp. 1-13. ISSN 1368-2199. (Published)

Lu, Yang and Ma, XiaoTong and Bao, Chao and Norhazilan, Md Noor and Lian, Huahua and Lim, Kar Sing (2022) Influence of earthquake disturbance on concrete strength at early age. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103280). ISSN 1474-7065. (Published)

Luqman Hakim, Ahmad Shah and Hou, Wentao and Razmpoosh, Mohammad Hadi and Walbridge, Scott S. and Gerlich, Adrian P. (2022) Strain rate and microtexture analysis of rapid-quenched AA6061 friction stir welds produced with tool eccentricity. Journal of Materials Research and Technology, 21. pp. 1434-1441. ISSN 2238-7854. (Published)

Luqman Hakim, Ahmad Shah and Sonbolestan, Seyedhossein and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2019) Dissimilar friction stir welding of thick plate AA5052-AA6061 aluminum alloys: effects of material positioning and tool eccentricity. The International Journal of Advanced Manufacturing Technology, 105 (1-4). pp. 889-904. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

M Arif, Abdullah and Mohd Fadzil Faisae, Ab Rashid and Zakri, Ghazalli and Nik Zuki, Nik Mohamed and Ahmad Nasser, Mohd Rose (2018) Modelling of assembly sequence planning problem using base part concept. AIP Publishing. pp. 200131-200135. ISSN 978-0-7354-1752-6. (Published)

M., Azwan and M. A., Maleque and M. M., Rahman (2018) TIG torch surfacing of metallic materials - a critical review. Transactions of the IMF, 97 (1). pp. 12-21. ISSN 1745-9192. (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and L. H., Shah (2015) Feasibility Study on Joining Dissimilar Aluminum Alloys AA6061 and AA7075 by Tungsten Inert Gas (TIG). Jurnal Teknologi (Sciences and Engineering), 75 (7). pp. 79-84. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

M. A., Amzar Kamarudin and S. W., Ahmad and W. A. R., Wan Ariffin (2021) The behaviour of high-rise building with or without shear wall under different earthquakes. Construction, 1 (2). 93 -101. ISSN 2785-8731. (Published)

M. A., Seman and S. M., Syed Mohsin and A. M. A., Zaidi and Z. M., Jaini (2022) Numerical investigation on reduced moment resistance and increased reinforcement spacing in reinforced concrete wall subjected to blast load. International Journal of Integrated Engineering, 14 (1). pp. 353-362. ISSN 2229-838X. (Published)

M. A., Seman and Sharifah Maszura, Syed Mohsin and A.M.A., Zaidi and Z. M., Jaini (2022) Numerical investigation on reduced moment resistance and increased reinforcement spacing in reinforced concrete wall subjected to blast load. International Journal of Integrated Engineering, 14 (1). pp. 353-362. ISSN 2229-838X. (Published)

M. A. H., M. Hanoin and N. S., Mohammed and M. A. I., Z. Arris and A. I., Abu Bakar and Nadzirah, Mohd Mokhtar and Amir, Abdul Razak (2019) Fabrication and performance evaluation of Integrated Solar Driven Membrane Distillation System with Serpentine-shape of Flat Plate Solar Collector for Seawater Desalination. Journal of Applied Membrane Science & Technology, 23 (3). pp. 49-63. ISSN 2600-9226. (Published)

M. A. S. M., Tarminzi and Amir, Abdul Razak and M. A. A., Azmi and Y. H., Ming and M. R. M., Akramin and N. M., Mohktar and A. F., Sharol (2021) Recent advances in solar drying system: A review. International Journal of Engineering Technology And Sciences (IJETS), 8 (1). pp. 1-13. ISSN 2289-697X. (Published)

M. F., Ishak and M. F., Zolkepli and E. M. H., Masyhur and N. Z. M., Yunus and A. S. A., Rashid and M. A., Hezmi and D. Z. A., Hasbollah and A. R., Yusoff (2022) Interrelationship between borehole lithology and electrical resistivity for geotechnical site investigation. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103279). pp. 1-9. ISSN 1474-7065. (Published)

M. F., Tajul Baharuddin and Samsudin, Taib and Roslan, Hashim and Mohd Hazreek, Zainal Abidin and Mohd Fakhrurrazi, Ishak (2011) Time-lapse resistivity investigation of salinity changes at an ex-promontory land: A case study of Carey Island, Selangor, Malaysia. Environmental Monitoring and Assessment, 180 (1-4). pp. 345-369. ISSN 0167-6369 (print); 1573-2959 (online). (Published)

M. F., Zolkepli and M. F., Ishak and S., Daud (2023) The Application of Unmanned Aerial Vehicle (UAV) For Slope Mapping at Gambang Damai Residents, Pahang: A Case Study. International Journal of Integrated Engineering, 15 (2). pp. 219-227. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

M. F., Zolkepli and M. F., Ishak and Z., Abu Talib (2022) Unmanned Aerial Vehicle (UAV)-Based for Slope Mapping and the Determination of Potential Slope Hazard. International Journal of Integrated Engineering, 14 (1). pp. 232-239. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

M. F., Zolkepli and Mohd Fakhrurrazi, Ishak and F. N. A., Zolfan and N. S., Yusoff and S., Daud and N. S., M. Zin (2023) The implementation of unmanned aerial vehicle (UAV) for slope mapping. International Journal of Engineering Technology And Sciences (IJETS), 10 (1). pp. 16-23. ISSN 2289-697X. (Published)

M. F., Zolkepli and Mohd Fakhrurrazi, Ishak and M. S.I., Zaini (2018) Analysis of slope stability on tropical residual soil. International Journal of civil Engineering and Technology (IJCIET), 9 (2). pp. 402-416. ISSN 0976-6308(Print); 0976-6316(Online). (Published)

M. Farouk, Abdelrahman and Afiqah, R. Radzi and Noor Suraya, Romali and Farouk, Mohamed and Elgamal, Mohamed and Hassan, Raouf and M. Omer, Mazen and Rahimi, A. Rahman (2024) Performance indicators for assessing environmental management plan implementation in water projects. Sustainability, 16 (8). pp. 1-19. ISSN 2071-1050. (Published)

M. Farouk, Abdelrahman and Ahmad Zhahiruddin, Zulhisham and Lee, Yong Siang and Rajabi, Mohammad Sadra and Abdul Rahimi, Abdul Rahman (2023) Factors, Challenges and Strategies of Trust in BIM-Based Construction Projects: A Case Study in Malaysia. Infrastructures, 8 (1). pp. 1-13. ISSN 2412-3811. (Published)

M. Farouk, Abdelrahman and Naganathan, Hariharan and Rahimi, A. Rahman and Kim, Jonghoon (2024) Exploring the economic viability of virtual reality in architectural, engineering, and construction education. Buildings, 14 (9). pp. 1-18. ISSN 2075-5309. (Published)

M. Farouk, Abdelrahman and Rahimi, A. Rahman (2023) Integrated applications of building information modeling in project cost management: a systematic review. Journal of Engineering, Design and Technology, AoP. pp. 181-199. ISSN 1726-0531. (Published)

M. L., Deng and C., Bao and A. T. S., Hung and N., Md. Noor and K. S., Lim (2022) Effect of defect geometries upon burst capacity of composite repaired pipe. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103274). pp. 1-6. ISSN 1474-7065. (Published)

M. N., Muhd Sidek and M. A., Megat Johari and M. F., Arshad and Mohd Faizal, Md Jaafar (2013) Behaviour of Metakaolin Concrete in Different Curing Condition. International Journal of Civil Engineering and Geo-Environmental, 4. pp. 1-7. ISSN 2180-2742. (Published)

M. N. M., Baharuddin and Norazwani, Muhammad Zain and Eida Nadirah, Roslin and Wan Sharuzi, Wan Harun and Zaeime, Sulong@Zakaria (2019) Physical properties of homogeneous particleboard based on acacia tree and polyurethane adhesive as a resins. International Journal of Engineering and Advanced Technology, 8 (6). pp. 3382-3387. ISSN 2249-8958. (Published)

M. Rafiqul, Islam and Mimi Sakinah, A. M. (2012) Kinetic studies on acid hydrolysis of Meranti wood sawdust for xylose production. Chemical Engineering Science, 71. pp. 431-437. (Published)

M. S., Norhidayah and A., Norhidayah (2015) Physiological and Psychological Effects on Heat Acclimatization in Extreme Hot Environment. International Journal of Advances in Science Engineering and Technology, 3 (1). pp. 46-52. ISSN 2321-9009. (Published)

M. S. A., Rahim and Izwan, Ismail and Choi, S. B. and Azmi, W. H. and S. N., Aqida (2017) Thermal Conductivity Enhancement and Sedimentation Reduction of Magnetorheological Fluids with Nano-Sized Cu and Al Additives. Smart Materials and Structures, 26 (115009). pp. 1-11. ISSN 0964-1726. (Published)

M. S. I., Zaini and Mohd Fakhrurrazi, Ishak and M. F., Zolkepli and M. S., Wahap and J. I., Jaafar Sidek and A., Mohd Yasin and M. N., Zolkepli and M. H., Mohmad Sidik and K. Z., Mohd Arof and Z., Abu Talib (2020) Granite exploration by using electrical resistivity imaging (ERI): a case study in Johor. International Journal of Integrated Engineering, 12 (8). pp. 328-347. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

M. S. I., Zaini and Muzamir, Hasan and K. A., Masri (2023) Stabilization of kaolinitic soil using crushed tile column. Magazine of Civil Engineering, 7 (123). p. 12303. ISSN 2712-8172. (Published)

M. S. M., Sani and K. M., Jelani and N. A. Z., Abdullah and M. N., Abdul Rani and M. A., Yunus (2023) Finite Element Modelling and Updating of Motorcycle Structure with Suitable Length of Connecting Element. Journal of Acoustics and Vibration Research (JAVR), 1 (1). p. 7689. (Published)

M. Z., Sharif and Azmi, W. H. and A .A. M., Redhwan and R., Mamat and T. M., Yusof (2017) Performance Analysis of Sio2/PAG Nanolubricant in Automotive Air Conditioning System. International Journal of Refrigeration, 75. pp. 204-216. ISSN 0140-7007. (Published)

M. Z., Sharif and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Samykano, Mahendran and Ali, Hafiz Muhammad (2023) Performance improvement strategies of R1234yf in vapor compression refrigeration system as a R134a replacement : A review. Journal of the Taiwan Institute of Chemical Engineers, 148 (105032). pp. 1-16. ISSN 1876-1070. (Published)

M.A.M., Jamil and M. Y., Abu and S.N.A.M., Zaini and N.H., Aris and Pinueh, N.S. and W.Z.A.W., Muhamad and F., Ramlie and N., Harudin and E., Sari and Nadiatul Adilah, Ahmad Abdul Ghani and Nur Najmiyah, Jaafar (2023) Application of Mahalanobis-Taguchi System in rainfall trends at UMP Gambang Campus. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (2). pp. 17-24. ISSN 2637-0883. (Published)

M.M., Naser and A., Zulkiple and Al bargi, W.A. and Khalifa, N.A. and Daniel, B.D. (2017) Modeling pedestrian gap crossing index under mixed traffic condition. Journal of Safety Research, 63. pp. 91-98. ISSN 0022-4375. (Published)

Ma, Quanjin and Kuai, Tengfei and M. R. M., Rejab and Manoj Kumar, Nallapaneni and M. S., Idris and Abdullah, M. H. (2020) Effect of boundary factor and material property on single square honeycomb sandwich panel subjected to quasi-static compression loading. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). 7348 -7360. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Mohammad, Azeem and Mat Sahat, Idris and M.F., Rani and Kumar, A.Praveen (2023) Axial and radial crushing behaviour of thin-walled carbon fiber-reinforced polymer tubes fabricated by the real-time winding angle measurement system. Forces in Mechanics, 10 (100170). pp. 1-10. ISSN 2666;3597. (Published)

Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Song, Yiheng and Zhang, Xin and Hanon, Muammel M. and M. H., Abdullah and Kumar, A. Praveen (2024) Effect of infill pattern of polylactide acid (PLA) 3D-printed integral sandwich panels under ballistic impact loading. Materials Today Communications, 38 (107626). pp. 1-6. ISSN 2352-4928. (Published)

Ma, XiaoTong and Bao, Chao and Doh, Shu Ing and Liu, HaiFeng and Zhang, L. X. and Ma, Z. W. and He, Y. (2021) Dynamic response analysis of story-adding structure with isolation technique subjected to near-fault pulse-like ground motions. Physics and Chemistry of the Earth, Parts A/B/C, 121. pp. 1-8. (Published)

Madkour, Dina M. and Mohd Ibrahim, Shapiai and Shaza Eva, Mohamad and Aly, Hesham Hamdy and Zool Hilmi, Ismail and Mohd Zamri, Ibrahim (2023) A systematic review of deep learning microalgae classification and detection. IEEE Access, 11. pp. 57529-57555. ISSN 2169-3536. (Published)

Madusari, Sylvia and Bindar, Yazid and Prakoso, Tirto and Noor Ida Amalina, Ahamad Nordin and Saidatul Shima, Jamari (2023) Morphological and thermal stability characteristics of oil palm frond and trunk by ultrasound-low alkali-based pretreatment. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Mahadi, Bahari and Aishah, Abdul Jalil and Che Rozid, Mamat and Nurul Sahida, Hassan and Herma Dina, Setiabudi and Vo, Dai Viet N. (2022) Insight into the development of silica-based materials as photocatalysts for CO2 photoconversion towards CH3OH : A review and recent progress. Surfaces and Interfaces, 31 (102049). pp. 1-20. ISSN 2468-0230. (Published)

Mahadi, Bahari and Che Rozid, Mamat and Aishah, Abdul Jalil and Nurul Sahida, Hassan and Nabgan, Walid and Herma Dina, Setiabudi and Vo, Dai Viet N. and Phuong Thuy, Bui Thi (2022) Mesoporous alumina : A comprehensive review on synthesis strategies, structure, and applications as support for enhanced H2 generation via CO2-CH4 reforming. International Journal of Hydrogen Energy, 47 (98). pp. 41507-41526. ISSN 0360-3199. (Published)

Mahadi B., Bahari and Che Rozid, Mamat and Aishah, Abdul Jalil and Siang, Tan Ji and Nurul Sahida, Hassan and Nur Farahain, Khusnun and Walid, Nabgan and Nurul Asmawati, Roslan and Sumaiya Zainal, Zainal Abidin and Herma Dina, Setiabudi and Vo, Dai Viet N. (2022) Cobalt-based catalysts for hydrogen production by thermochemical valorization of glycerol: a review. Environmental Chemistry Letters, 20 (4). pp. 2361-2384. ISSN 1610-3653. (Published)

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Ramasamy, D. and Samylingam, L. and Aslfattahi, Navid (2021) Thermal performance of nanomaterial in solar collector: State-of-play for graphene. Journal of Energy Storage, 42 (103022). pp. 1-16. ISSN 2352-152X. (Published)

Mahmed, Ali Nader and Mohd Nizam, Mohmad Kahar (2024) Simulation for dynamic patients scheduling based on many objective optimization and coordinator. Informatica (Slovenia), 48 (1). pp. 91-106. ISSN 0350-5596. (Published)

Mahmed, Ali Nader and Mohd Nizam Mohmad, Kahar (2022) Window-based multi-objective optimization for dynamic patient scheduling with problem-specific operators. Computers, 11 (5). pp. 1-16. ISSN 2073-431X. (Published)

Mahmood, R. A. and Ali, O. M. and Al-Janabi, A. and Al-Doori, G. and M. M., Noor (2021) Review of mechanical vapour compression refrigeration system part 2: performance challenge. International Journal of Applied Mechanics and Engineering, 26 (3). pp. 119-130. ISSN 1734-4492. (Published)

Mahmood, Wafaa K. and Hussien, Samar S. and Kadhim, Wafaa A. and Abdulbari, Hayder A. (2021) Oil-soluble organic polymer driven from aloe vera as drag reducing agent for crude oil flow in pipelines. International Journal of Oil, Gas and Coal Technology (IJOGCT), 27 (2). pp. 127-142. ISSN 1753-3317. (Published)

Mahmoudi Khatir, Nadia and Abdul-Malek, Zulkurnain and Zak, Ali Khorsand and Akbari, Abolghasem and Sabbagh, Farzaneh (2015) Sol–gel Grown Fe-doped ZnO Nanoparticles: Antibacterial and Structural Behaviors. Journal of Sol-Gel Science and Technology. pp. 1-8. ISSN 0928-0707. (Published)

Mandal, Ashis Kumar and Kahar, M. N. M. and Kendall, Graham (2020) Addressing examination timetabling problem using a partial exams approach in constructive and improvement. Computation, 8 (2). pp. 1-28. ISSN 2079-3197. (Published)

Mandiartha, Putu and Duffield, C. F. and Intan Suhana, Mohd Razelan and Azlina, Ismail (2017) Pavement Maintenance Optimization Model using Markov Decision Processes. Journal of Physics: Conference series, 890 (012104). pp. 1-6. ISSN 1742-6588 (print); 1742-6596 (online). (Published)

Mandiartha, Putu and Intan Suhana, Mohd Razelan and Azlina, Ismail (2017) Risk Management, Governance and Financing Issues in Public-Private Partnership Transportation Projects. Journal of Governance & Integrity, 1 (1). pp. 80-98. ISSN 2600-7479. (Published)

Margono, Margono and Kaavessina, Mujtahid and Mior Ahmad Khushairi, Mohd Zahari and Anwaruddin, Hisyam (2019) Continuous Bioethanol Production Using Uncontrolled Process in a Laboratory Scale of Integrated Aerobic-Anaerobic Baffled Reactor. Periodica Polytechnica Chemical Engineering. pp. 1-7. ISSN 1587-3765. (Published)

Mas Ira Syafila, Mohd Hilmi Tan and Ahmad Fairuz, Omar and Marzaini, Rashid and Uda, Hashim (2019) VIS-NIR spectral and particles distribution of Au, Ag, Cu, Al and Ni nanoparticles synthesized in distilled water using laser ablation. Results in Physics, 14. pp. 1-12. ISSN 2211-3797. (Published)

Masdiyana, Ibrahim and Wan Mastura, Wan Ibrahim and Mohd Mustafa Al Bakri, Abdullah and Nabialek, Marcin and Putra Jaya, Ramadhansyah and Setkit, Monthian and Romisuhani, Ahmad and Je˙z, Bartłomiej (2023) Synthesis of Metakaolin Based Alkali Activated Materials as an Adsorbent at Different Na2SiO3/NaOH Ratios and Exposing Temperatures for Cu2+ Removal. Materials, 16 (3). pp. 1-22. ISSN 1996-1944. (Published)

Mashanim, Mahazir and Rahimi, A. Rahman and Nurhaizan, Mohd Zainudin and Salmaliza, Salleh (2024) Construction project failure: Investigating causes of ineffective building information modelling execution plans. Journal of the Malaysian Institute of Planners, 22 (3). pp. 47-62. ISSN 1675-6215. (Published)

Masyhur, Eko March Handoko and Wan Nursyafiqah, Wan Jusoh and Mohd Noordin, Abu Bakar (2018) Field study to identify river plume extension of Kerian River discharge during neap and spring tide. Bulletin of the Geological Society of Malaysia, 65. pp. 13-18. ISSN 0126-6187. (Published)

Mawardi, Indra and Nurdin, . and Fakhriza, . and Rizal, Samsul and Sri Aprilia, . and Faisal, Muhammad and Putra Jaya, Ramadhansyah (2023) Optimization of particle size and ramie fiber ratio on hybrid bio panel production from oil palm trunk as thermal insulation materials. Journal of Ecological Engineering, 24 (2). pp. 39-49. ISSN 2299–8993. (Published)

Mazlan, Abu Seman and A., Zulkiple Program Perantis Sedia Ada Bagi Meningkatkan Kebolehpasaran Pelajar Ijazah Sarjana Muda Universiti Malaysia Pahang. Program Perantis Sedia Ada Bagi Meningkatkan Kebolehpasaran Pelajar Ijazah Sarjana Muda Universiti Malaysia Pahang. (Published)

Mazlan, Abu Seman and Feng, Yun Tian and Zainorizuan, Mohd Jaini and Nasly, Mohamed Ali (2012) Transformer Explosion and Impact on the Reinforced Blast Wall. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 29-33. ISSN 2180-2742. (Published)

Mazlan, Abu Seman and Sharifah Maszura, Syed Mohsin and A. M. A., Zaidi and M. F. S., Koslan and Z. M., Jaini (2021) Experimental of Inverted-T Shape Reinforced Concrete Wall Subjected to Blast Load. Key Engineering Materials, 879. pp. 254-262. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Mazlan, Hashim and Nadzri M., Reba and Muhammad I., Nadzri and Amin, Pour and Mohd R., Mahmud and Abdull R., Mohd Yusoff and Mohamad Idris, Ali and Jaw, S. W. and Mohammad S., Hossain (2016) Satellite-Based Run-Off Model for Monitoring Drought in Peninsular Malaysia. Remote Sensing, 8 (8). pp. 1-26. ISSN 2072-4292. (Published)

Md Abdus, Sobahan and Islam, Mir Sujaul (2015) Integrated Assessment of Heavy Metal Contamination in Sediments from Gebeng Industrial Estate, Pahang, Malaysia. Research Journal of Recent Sciences, 4 (11). pp. 26-35. ISSN 2277-2502. (Published)

Md Azree, Othuman Mydin and Jagadesh, P. and Bahrami, Alireza and Dulaimi, Anmar and Özkılıç, Yasin Onuralp and Mohd Mustafa Al Bakri, Abdullah and Putra Jaya, Ramadhansyah (2023) Use of calcium carbonate nanoparticles in production of nano-engineered foamed concrete. Journal of Materials Research and Technology, 26. 4405 -4422. ISSN 2238-7854. (Published)

Md Dan, M. F. A. and Edy Tonnizam, M. and Komoo, I. and Madun, A. and Abu Talib, M. K. and Putra Jaya, Ramadhansyah and Mohd Taib, A. and Abang Hasbollah, D. Z. and Md Yusof, Z. and Noorasyikin, M. N. (2023) Physico-mechanical characteristics of tropical granite boulders in weathered heterogeneous zones for geotechnical design purposes. Physics and Chemistry of the Earth, Parts A/B/C, 129 (103311). pp. 1-12. ISSN 1474-7065. (Published)

Md Isa, Khairuddin and Farizul Hafiz , Kasim and Saiful Azhar , Saad and Mohd Asri , Ab Rahim and Abd Aziz, Mohd Aizudin and Md Ali, Umi Fazara (2017) Influence of operating parameters on biomass conversion under suband supercritical water conditions. Chemical Engineering and Technology, 40 (3). pp. 537-545. ISSN 09307516. (Published)

Md Shahnewaz, Shoaib and Khairil Azman, Masri and Nadiatul Adilah, Ahmad Abdul Ghani and Putra Jaya, Ramadhansyah and Chin, Siew Choo (2024) Mechanical Performance of Two Different Gradations of Porous Asphalt Mixtures Incorporating Bamboo Fiber. Suranaree Journal of Science and Technology, 31 (1). pp. 1-13. ISSN 2587-0009. (Published)

Md. Arif, Hossen and Fatema, Khatun and Riyadh Ramadhan, Ikreedeegh and Aamina Din, Muhammad and Azrina, Abd Aziz and Kah, Hon Leong and Lan, Ching Sim and Wu, Lihua and Minhaj, Uddin Monir (2023) Enhanced Photocatalytic CO2 Reduction to CH4 Using Novel Ternary Photocatalyst RGO/Au-TNTAs. Energies, 16 (4). p. 5404. ISSN 1996-1073. (Published)

Md. Ikramul, Hoque and Muzamir, Hasan (2022) Factors affecting the construction quality in Bangladesh. International Journal of Building Pathology and Adaptation, Ahead of print (Ahead of print). pp. 1-17. ISSN 2398-4708. (In Press / Online First) (In Press / Online First)

Megat Syahirul Amin, Megat Ali and Azlee, Zabidi and Nooritawati, Md Tahir and Ihsan, Mohd Yassin and Eskandari, Farzad and Azlinda, Saadon and Mohd Nasir, Taib and Abdul Rahim, Ridzuan (2024) Short-term Gini coefficient estimation using nonlinear autoregressive multilayer perceptron model. Heliyon, 10 (e26438). pp. 1-19. ISSN 2405-8440. (Published)

Mehek, Rimsha and Iqbal, Naseem and Javed, Omama and Noor, Tayyaba and Liu, Wei (2024) Improved rate capability and long cycle life of metal-organic framework derived TiO2 @V2O5 composite as an efficient cathode for sodium-ion batteries. Journal of Energy Storage, 78 (109921). pp. 1-15. ISSN 2352-152X. (Published)

Menon, Vikas and Sharma, Swati and Gupta, Shreya and Ghosal, Anujit and Nadda, Ashok Kumar and Jose, Rajan and Sharma, Pooja and Kumar, Sunil and Singh, Pardeep and Raizada, Pankaj (2023) Prevalence and implications of microplastics in potable water system: An update. Chemosphere, 317 (137848). pp. 1-14. ISSN 0045-6535. (Published)

Miah, M. Saef Ullah and Junaida, Sulaiman and Sarwar, Talha and Naseer, Ateeqa and Ashraf, Fasiha and Kamal Zuhairi, Zamli and Jose, Rajan (2022) Sentence boundary extraction from scientific literature of electric double layer capacitor domain: Tools and techniques. Applied Sciences, 12 (3). pp. 1-19. ISSN 2076-3417. (Published)

Miah, Mohammad Badrul Alam and Suryanti, Awang and Rahman, Md Mustafizur and A. S. M., Sanwar Hosen and Ra, In-Ho (2022) Keyphrases Frequency Analysis from Research Articles: A Region-Based Unsupervised Novel Approach. IEEE Access. pp. 1-12. ISSN 2169-3536. (Published)

Miah, Mohammad Badrul Alam and Suryanti, Awang and Rahman, Md Mustafizur and Sanwar Hosen, A. S. M. and Ra, In-Ho (2022) A New Unsupervised Technique to Analyze the Centroid and Frequency of Keyphrases from Academic Articles. Electronics, 11 (17). pp. 1-20. ISSN 2079-9292. (Published)

Ming, Tie and Tian, Cheng Hock and Zahrizan, Zakaria and Ideris, Zakaria (2012) Application of Probabilistic Analysis in Finite Element Modeling of Prestressed Inverted T-Beam with Web Openings. Research Journal of Applied Sciences, Engineering and Technology, 4 (4). pp. 350-366. ISSN 2040-7467. (Published)

Minhalina, Ahmad Buhairi and Farhana, Mohd Foudzi and Fathin Iliana, Jamhari and Abu Bakar, Sulong and Nabilah Afiqah, Mohd Radzuan and Norhamidi A., Muhamad and Intan Fadhlina, Mohamed and Abdul Hadi, Azman and Wan Sharuzi, Wan Harun and Al-Furjan, M. S.H. (2023) Review on volumetric energy density: Influence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion. Progress in Additive Manufacturing, 8 (2). pp. 265-283. ISSN 2363-9512. (Published)

Mishra, Puranjan and Hai, Tao and Jasni, Mohamad Zain and Saini, Karuna and Manoj Kumar, Nallapaneni and Zularisam, Abdul Wahid (2023) Co-digestion of domestic kitchen food waste and palm oil mill effluent for biohydrogen production. Sustainable Energy Technologies and Assessments, 55 (102965). pp. 1-5. ISSN 2213-1388. (Published)

Mohamad, N. and Khairunisa, Muthusamy and Ismail, M. A. (2021) Cockle shell as mixing ingredient in concrete: A review. Construction, 1 (2). pp. 9-20. ISSN 2785-8731. (Published)

Mohamad Dzol, M. A.A. and Balasundram, Vekes and Shameli, Kamyar and Norazana, Ibrahim and Zainuddin, Abdul Manan and Ruzinah, Isha (2022) Catalytic pyrolysis of high-density polyethylene over nickel-waste chicken eggshell/HZSM-5. Journal of Environmental Management, 324 (116392). pp. 1-6. ISSN 0301-4797. (Published)

Mohamad Haziq, Alias and Noor Syafiqah, Hassin and Lau, Pui Pui and Izan Izwan, Misnon and Rajan, Jose (2019) Effect of PVDF-CA ratio on electrospun membrane fabrication for water filtration application. Materials Science Forum, 981. pp. 356-361. ISSN 0255-5476. (Published)

Mohamad Idris, Ali and Mazlan, Hashim and H. S., M. Zin (2014) Assessing Water Availability Over Peninsular Malaysia Using Public Domain Satellite Data Products. IOP Conference Series: Earth and Environmental Science, 18 (1). pp. 1-5. ISSN 1755-1315. (Published)

Mohamad Idris, Ali and Youventharan, Duraisamy (2011) Application of GIS Analyzing Settlement Along Pekan-Kuantan Federal Road. International Journal of Civil Engineering and Geo-Environmental, 2. pp. 65-70. ISSN 2180-2742. (Published)

Mohamad Ihsan, Abdul Hamid and Saiful Amri, Mazlan and Nur Azmah, Nordin and Abd Fatah, Abdul Yasser and Ubaidillah, U. and Imaduddin, Fitrian and Izwan, Ismail (2023) Design and dynamic stiffness evaluation of magnetorheological elastomer bushing using FEMM and dynamic testing machine. Journal of Mechanical Engineering, 20 (1). pp. 43-60. ISSN 1823-5514. (Published)

Mohamad Iqhmannabil, Karim and Azrul Azim, Abdullah Hashim and Nor Maniha, Abdul Ghani (2022) Control of double link flexible robotic manipulator system. Journal Europeen des Systemes Automatises, 55 (6). pp. 759-763. ISSN 1269-6935. (Published)

Mohamad Lokman, Idris and Abdul Rahimi, Abdul Rahman and Ishiyaku, Bala and Ahmad Rizal, Alias (2024) Preserving heritage buildings with building information modelling: Addressing the challenges and opportunities. Smart and Green Materials, 1 (1). pp. 33-43. ISSN 3048-426X. (Published)

Mohamad Razwan, Abdul Malek and Nor Azlina, Ab. Aziz and Alelyani, Salem and Mohana, Mohamed and Farah Nur Arina, Baharudin and Zuwairie, Ibrahim (2022) Comfort and energy consumption optimization in smart homes using bat algorithm with inertia weight. Journal of Building Engineering, 47 (103848). pp. 1-14. ISSN 2352-7102. (Published)

Mohamad Sazri Fahmi, Ramli and Muhammad Hazli, Mazlan and Takano, Hiromitsu and Abdul Halim, Abdullah and Muhammad Hilmi, Jalil (2023) A review of material, design, and techniques in 3D printing for medical applications. International journal of online and biomedical engineering, 19 (16). pp. 38-64. ISSN 2626-8493. (Published)

Mohamad Shaiful, Abdul Karim and Norazwina, Zainol and Nur izaty Ak'ma, Abu Hassan As'ari and Nurhafizah, Abu Talip Yusof and Nor Hazwani, Aziz (2022) Effect of processing parameters on cellulose content extracted from pineapple leaf. Biocatalysis and Agricultural Biotechnology, 42 (102339). pp. 1-12. ISSN 1878-8181. (Published)

Mohamed, Haydar Ataelmanan Ali and Sitti Asmah, Hassan and Othman, Che Puan and Al-Bahr, Tareq Mohamed and Azhari, Shaza Farouk (2023) The relationship between speed differential and time to collision of Malaysian expressways. Suranaree Journal of Science and Technology, 30 (010182). pp. 1-8. ISSN 0858-849X. (Published)

Mohamed Hasaan, Hussain and Noor Fitrah, Abu Bakar and Low, Kim-Fatt and Ana Najwa, Mustapa and Fatmawati, Adam and Mohd Nazli, Naim and Lenggoro, I. Wuled (2021) Growth-controlled synthesis of polymer-coated colloidal-gold nanoparticles using electrospray-based chemical reduction. Particuology, 57. pp. 72-81. ISSN 1674-2001. (Published)

Mohamed Zul Fadhli, Khairuddin and Khairunnisa, Hasikin and Nasrul Anuar, Abd Razak and Lai, Khin Wee and Mohd Zamri, Osman and Aslan, Muhammet Fatih and Sabanci, Kadir and Muhammad Mokhzaini, Azizan and Satapathy, Suresh Chandra (2022) Predicting occupational injury causal factors using text-based analytics : A systematic review. Frontiers in Public Health, 10 (984099). pp. 1-17. ISSN 2296-2565. (Published)

Mohammad, Azeem and Hamdan, Haji Ya and Kumar, Mukesh and Stabla, Paweł and Smolnicki, Michal Jan and Gemi, Lokman and Khan, Rehan and Ahmed, Tauseef and Quanjin, Ma and Sadique, Rehan Rehan and Ainul Akmar, Mokhtar and Mazli, Mustapha (2022) Application of filament winding technology in composite pressure vessels and challenges : A review. Journal of Energy Storage, 49 (103468). ISSN 2352-152X. (Published)

Mohammad Affendy, Omardin and M. F., Ishak and N. F., Omar and K. J., Abd Hamid and F. Z., Mansur and Lau, P. D. and N. A., Tutur and M., Mustafa and K., Mansor and Teo, M. Y. and Lee, J. X. (2023) Conceptual risk assessment for new township infrastructure expansion at Kuantan. International Journal of Engineering Technology And Sciences (IJETS), 10 (1). pp. 7-15. ISSN 2289-697X. (Published)

Mohammad Affendy, Omardin and Norzamzila, Mustafa and Khalimi Johan, Abd Hamid and Wan Dagang, Wan Ali (2011) New Impression of Hotel in Sustainable Building Conversion and Adaptation Through University Campus. International Journal of Civil Engineering and Geo-Environmental, 2. pp. 1-5. ISSN 2180-2742. (Published)

Mohammad Affendy, Omardin and Wan Mohd Nazmi, Wan Abdul Rahman and Wan Dagang, Wan Ali (2017) Integration of Environmental Sustainability Strategies Within Pre-Construction Processes. The Social Sciences, 12 (5). pp. 787-793. ISSN 1818-5800. (Published)

Mohammad Alwi, M.A. and Normaya, E. and Ismail, H. and Iqbal, A. K. M. A. and Mat Piah, B. and Abu Samah, M.A. and Ahmad, M.N. (2021) Two-dimensional infrared correlation spectroscopy, conductor-like screening model for real solvents, and density functional theory study on the adsorption mechanism of polyvinylpolypyrrolidone for effective phenol removal in an aqueous medium. ACS Omega, 6 (39). pp. 25179-25192. ISSN 2470-1343. (Published)

Mohammad Amirulkhairi, Zubir and Muhammad Nazrin Akmal, Ahmad Zawawi and Mohd Fairuz, Azmi (2022) Mechanical properties of synthetic lightweight coarse aggregate infuse with offshore sand. Journal of Advanced Research in Applied Sciences and Engineering Technology, 28 (2). pp. 372-379. ISSN 2462-1943. (Published)

Mohammad Amirulkhairi, Zubir and Muhammad Nazrin Akmal, Ahmad Zawawi and Mohd Fairuz, Azmi (2015) Synthetic Lightweight Coarse Aggregate using Offshore Sand. Journal of Advanced Research in Applied Mechanics, 12 (1). pp. 16-22. ISSN 2289-7895. (Published)

Mohammad Hazim, Mohd Hamdan and Siregar, Januar Parlaungan and Dandi, Bachtiar and Mohd Ruzaimi, Mat Rejab and Tezara, Cionita (2018) Mechanical properties of mengkuang leave fiber reinforced low density polyethylene composites. Natural Fiber Reinforced Vinyl Esterand Vinyl Polymer Composites, 6 (2018). pp. 181-196. ISSN 978-0-08-102160-6. (Published)

Mohammad I, AlBiajawi and Rahimah, Embong and Khairunisa, Muthusamy (2021) An overview of the utilization and method for improving pozzolanic performance of agricultural and industrial wastes in concrete. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Mohammad S., Al-Mohammad and Ahmad Tarmizi, Haron and Rahimi, A. Rahman and KS, Anandh (2023) Critical Factors Affecting BIM Implementation in India: Multivariate Analysis. AIP Conference Proceedings, 2688 (1). ISSN 0094-243X. (Published)

Mohammad S., Al-Mohammad and Ahmad Tarmizi, Haron and Rahimi, A. Rahman and Yasir, Alhammadi (2023) Factors affecting BIM implementation in Saudi Arabia: a critical analysis. International Journal of Building Pathology and Adaptation. ISSN 2398-4708. (In Press / Online First) (In Press / Online First)

Mohammad Syamsyul Hairi, Saad and Mohamad Idris, Ali and Putri Zulaiha, Razi and Noram Irwan, Ramli (2024) Flood Risk Management in Development Projects: A Review of Malaysian Perspective within the Sendai Framework for Disaster Risk Reduction 2015-2030. Construction, 4 (2). 103 -117. ISSN 2785-8731. (Published)

Mohammad Waffy, Fazil and Puteri Fadzline, Muhamad Tamyez and Lee, Chia Kuang (2023) The Impact of task and technology characteristics on cost estimation performance in construction projects: A regression analysis. Journal of Advanced Research in Business and Management Studies, 33 (1). pp. 1-14. ISSN 2462-1935. (Published)

Mohammed, Badiea Abdulkarem and Senan, Ebrahim Mohammed and Al-Mekhlafi, Zeyad Ghaleb and Rassem, Taha Hussein and Makbol, Nasrin M. and Alanazi, Adwan Alownie and Almurayziq, Tariq S. and Ghaleb, Fuad A. and Sallam, Amer A. (2022) Multi-method diagnosis of CT images for rapid detection of intracranial hemorrhages based on deep and hybrid learning. Electronics (Switzerland), 11 (2460). ISSN 2079-9292. (Published)

Mohammed, Marwah Noori and Kamal, Yusoh and Jun Haslinda, Haji Sharifuddin (2020) Thermal and structure analysis based on exfoliation of clay in thermosensitive polymer by in-situ polymerization. Indonesian Journal of Chemistry, 20 (1). pp. 88-95. ISSN 14119420. (Published)

Mohammed Adam Kunna, Azrag and Jasni Mohamad, Zain and Tuty Asmawaty, Abdul Kadir and Marina, Yusoff and Jaber, Aqeel Sakhy and Abdlrhman, Hybat Salih Mohamed and Ahmed, Yasmeen Hafiz Zaki and Husain, Mohamed Saad Bala (2023) Estimation of small-scale kinetic parameters of escherichia coli (E. coli) model by enhanced segment particle swarm optimization algorithm ese-pso. Processes, 11 (126). pp. 1-25. ISSN 2227-9717. (Published)

Mohan, Varun Geetha and Mubarak-Ali, Al-Fahim and Vijayan, Bincy Lathakumari and Mohamed Ariff, Ameedeen (2023) A survey on artificial intelligence techniques for various wastewater treatment processes. Journal of Engineering and Technology (JET), 14 (1). p. 175. ISSN 2180-3811. (Published)

Mohd, Nasrullah and Ansar, Sabah and Krishnan, Santhana and Singh, Lakhveer and Gouse Peera, S. Gouse and Zularisam, Abdul Wahid (2022) Electrocoagulation treatment of raw palm oil mill effluent : Optimization process using high current application. Chemosphere, 299 (134387). pp. 1-10. ISSN 0045-6535. (Published)

Mohd, Nasrullah and Zularisam, A. W. and Fadzil, Mat Yahaya (2012) Sewage Water Treatment by Electrocoagulation Process. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 41-45. ISSN 2180-2742. (Published)

Mohd Aiman, Hamdan and Khairatun Najwa, Mohd Amin and Fatmawati, Adam (2024) Quantitative analysis of molecular interactions in κ-carrageenan-Isovanillin biocomposite for biodegradable packaging and pharmaceutical applications using NMR, TOF-SIMS, and XPS approach. Food Chemistry, 452 (139556). pp. 1-9. ISSN 0308-8146. (Published)

Mohd Ali, Nur Fahriza and Mohd Sadullah, Ahmad Farhan and Zulkiple, A. (2022) Logistic regression approach in studying travel demand during morning peak hour: A case study in Klang Komuter Station, Malaysia. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 91-99. ISSN 2637-0883. (Published)

Mohd Ali Hanafiah, Shaharudin and Ahmad Razlan, Yusoff (2023) Using Finite Element simulation to investigate the effect of cutting edge radius on burr formation for inclined dimple milling operation. Jurnal Tribologi, 38. pp. 49-68. ISSN 2289-7232. (Published)

Mohd Aminudin, Jamlos and Mohd Faizal, Jamlos and Wan Azani, Mustafa and Nur Amirah, Othman and Mohamad Nur Khairul Hafizi, Rohani and Syahrul Affandi, Saidi and Mohd Sharizan, Md Sarip and Mohd Al Hafiz, Mohd Nawi (2023) Reduced graphene oxide uwb array sensor : High performance for brain tumor imaging and detection. Nanomaterials, 13 (27). pp. 1-15. ISSN 2079-4991. (Published)

Mohd Aminudin, Jamlos and Nur Amirah, Othman and Wan Azani, Mustafa and Mohd Faizal, Jamlos and Mohamad Nur Khairul Hafizi, Rohani (2023) Zero-index metamaterial superstrates uwb antenna for microwave imaging detection. Computers, Materials and Continua, 75 (1). pp. 277-292. ISSN 1546-2218. (Published)

Mohd Aminudin, Jamlos and Nurasma Husna, Mohd Sabri and Mohd Faizal, Jamlos and Wan Azani, Mustafa and Syed Zulkarnain, Syed Idrus and Mohamad Nur Khairul Hafizi, Rohani and Khairul Najmy, Abdul Rani and Mohd Al Hafiz, Mohd Nawi (2022) 5.8 GHz circularly polarized rectangular microstrip antenna arrays simulation for point-to-point application. Journal of Advanced Research in Applied Sciences and Engineering Technology, 28 (3). pp. 209-220. ISSN 2462-1943. (Published)

Mohd Amir Shahlan, Mohd-Aspar and Raihana Zahirah, Edros and Siti Umairah, Mokhtar and Norhidayah, Kamarudin (2023) The roles of acidity, peroxide and non-peroxide compounds in antibacterial properties of Malaysian Kelulut, Tualang and Acacia honey. Malaysian Journal Of Microbiology, 19 (3). pp. 291-300. ISSN 2231-7538. (Published)

Mohd Amiruddin, Fikri and Wan Mohd Faizal, . and Hasyiya Karimah, Adli and R., Mamat and W. H., Azmi and Zafri Azran, Abdul Majid and Anwar Ilmar, Ramadhan (2021) Characteristic of TiO2-SiO2 nanofluid with water/ethylene glycol mixture for solar application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 81 (2). pp. 1-13. ISSN 2289-7879. (Published)

Mohd Anwar, Zawawi and Wan Hamzah, Wan Azmi and Khamisah, Abdul Hamid and Hendrawati, T. Y. and Muhammad Aminullah, Abdul Rahman (2024) Experimental investigation of air-conditioning electrical compressor using binary TiO2–SiO2 polyol-ester nanolubricants. Case Studies in Thermal Engineering, 54 (104045). pp. 1-17. ISSN 2214-157X. (Published)

Mohd Aufa Hadi Putera, Zaini and Mohd Mawardi, Saari and Nurul A’in, Nadzri and Zulkifly, Ab Aziz and Kiwa, Toshihiko (2024) Backside defect evaluation in carbon steel plate using a hybridized magnetic flux leakage and eddy current technique. Journal of Nondestructive Evaluation, 43 (9). pp. 1-15. ISSN 0195-9298. (Published)

Mohd Azri Hizami, Rasid and Lanfranchi, Vincent and Ospina-Vargas, Alejandro and El Kadri Benkara, Khadija (2024) Influence of temperature on power factor and operating area of SynRM machine in automotive equipment. International Journal of Power Electronics and Drive Systems, 15 (1). pp. 117-126. ISSN 2088-8694. (Published)

Mohd Azrul Hisham, Mohd Adib and Nurul Aqilah, Herman and Idris, Mat Sahat and Waheb Abdul Jabbar, Shaif Abdullah (2020) Smart robotic rover enhancement in safety monitoring. International Journal of Emerging Trends in Engineering Research, 8 (1.2). pp. 1-5. ISSN 2347-3983. (Published)

Mohd Bijarimi, Mat Piah and Mohammad Norazmi, Ahmad and Erna Normaya, Abdullah and Muhammad Zakir, Muzakkar (2023) Modifications of poly(lactic Acid) with blends and plasticization for tenacity and toughness improvement. Indonesian Journal of Chemistry, 23 (4). pp. 1161-1180. ISSN 1411-9420. (Published)

Mohd Fadzil, Rahim and Abdul Aziz, Jaafar and Rizalman, Mamat and Zahari, Taha Performance assessment of direct injection compressed natural gas vehicle at different injection pressures using speed-sweep test method. Materials Science and Engineering, Volume 788 (012068). ISSN 1757-899X. (Published)

Mohd Fadzil Faisae, Ab Rashid and Nik Mohd Zuki, Nik Mohamed and Oumer, Ahmed Nurye (2022) Modelling and optimization of energy efficient assemblyline balancing using modified moth flame optimizer. International Journal of Integrated Engineering, 14 (1). pp. 25-39. ISSN 2229-838X. (Published)

Mohd Fahmi, Othman and Abdul Adam, Abdullah and G., Najafi and R., Mamat (2017) Green Fuel as Alternative Fuel for Diesel Engine: A Review. Renewable and Sustainable Energy Reviews, 80. pp. 694-709. ISSN 1364-0321. (Published)

Mohd Faizal, Md Jaafar and Hamidah, Mohd Saman and Muhd Norhasri, Muhd Sidek (2013) Simultaneous Monitoring on Corrosion-pH-Temperature using Multiplexed Fiber Bragg Grating Sensors Techniques in New RC Structure: A Review. International Journal of Civil Engineering and Geo-Environmental, 4. pp. 41-49. ISSN 2180-2742. (Published)

Mohd Faizal, Md Jaafar and Hamidah, Mohd Saman and Muhd Norhasri, Muhd Sidek and Noorli, Ismail and Nur Farhayu, Ariffin (2017) Chloride Resistance Behavior on Nano-Metaclayed Ultra-High Performance Concrete. MATEC Web of Conferences, 103 (01023). pp. 1-10. ISSN 2261-236X. (Published)

Mohd Faizal, Md Jaafar and Khairunisa, Muthusamy (2024) Assessment of POFA-pervious concrete performance with oil palm shells as a partial aggregate replacement. The Open Civil Engineering Journal, 18 (e18741495285498). pp. 1-21. ISSN 1874-1495. (Published)

Mohd Faizal, Md Jaafar and Khairunisa, Muthusamy and Nur Farah Aziera, Jamaludin and Sofia Adibah, Jasni and Fahrizal, Zulkarnain and UNSPECIFIED (2024) Fire resistance of lightweight aggregate concrete containing spent garnet as partial fine aggregate replacement. The Open Construction & Building Technology Journal, 18 (e18748368294704). pp. 1-14. ISSN 1874-8368. (Published)

Mohd Faizal, Md Jaafar and Muhd Sidek, M. N. and Mohd Saman, H. and Khairunisa, Muthusamy and Norhaiza, Ghazali and Ibrahim, A. (2021) Application of response surface methodology for chloride transport properties in nano metaclayed-UHPC. Construction, 1 (2). 31 -39. ISSN 2785-8731. (Published)

Mohd Faizal, Md Jaafar and Norhaiza, Ghazali and Khairunisa, Muthusamy and Ezahtul Shahreen, Ab Wahab and Azlina, Ismail (2021) Influence of the replacement of ungraded-PKS aggregate on properties of lightweight pervious concrete. International Journal of Engineering Technology And Sciences (IJETS), 8 (1). pp. 25-33. ISSN 2289-697X. (Published)

Mohd Fakhrurrazi, Ishak and M. F., Zolkepli and Mohd Yusri, Mohd Yunus and Nazri, Ali and Azman, Kassim and M. S.I., Zaini (2021) Verification of tree induced suction with numerical model. Physics and Chemistry of the Earth, 121. pp. 1-8. ISSN 14747065. (Published)

Mohd Fakhrurrazi, Ishak and M. F., Zolkepli and Nurmunira, Muhammad (2020) The effectiveness of unmanned aerial vehicle (UAV) for digital slope mapping. International Journal of Engineering Technology And Sciences (IJETS), 7 (2). pp. 119-136. ISSN 2289-697X. (Published)

Mohd Fakhrurrazi, Ishak and M. F. M., Talhah and M. F., Zolkepli and S., Daud and N. S. M., Zin (2023) Exploration of secondary deposit to determine manganese ore body. International Journal of Engineering Technology And Sciences (IJETS), 10 (1). 24 -33. ISSN 2289-697X. (Published)

Mohd Fakhrurrazi, Ishak and Muhammad Farhan, Zolkepli (2016) Exploration of Methods for Slope Stability Analysis Influenced by Unsaturated Soil. Electronic Journal of Geotechnical Engineering (EJGE), 21 (Bund. 16). pp. 5627-5641. ISSN 1089-3032. (Published)

Mohd Fakhrurrazi, Ishak and Muhammad Farhan, Zolkepli and M. Y. M., Yunus and M. S. I., Zaini and M. S., Wahap and A. M., Yasin and M. H., Sidik and M. A., Hezmi (2021) Application of Unmanned Aerial Vehicle (UAV) for Slope Mapping at Pahang Matriculation College, Malaysia. Physics and Chemistry of the Earth, Parts A/B/C. pp. 1-29. ISSN 1474-7065. (In Press / Online First) (In Press / Online First)

Mohd Fakhrurrazi, Ishak and Muhammad Farhan, Zolkepli and M. Y. M., Yunus and N., Ali and A., Kassim and M. S. I., Zaini (2021) The effect of tree water uptake on suction distribution in tropical residual soil slope. Physics and Chemistry of the Earth, Parts A/B/C, 121 (102984). pp. 1-7. ISSN 1474-7065. (Published)

Mohd Fakhrurrazi, Ishak and Nazli, Ali and Azman, Kassim (2012) Tree Induce Suction For Slope Sustainability. Applied Mechanics and Materials, 170-173. pp. 1334-1338. ISSN 1662-7482. (Published)

Mohd Fakhrurrazi, Ishak and Nazri, Ali and Azman, Kassim (2016) Analysis of suction distribution response to rainfall event and tree canopy. Jurnal Teknologi (Sciences and Engineering), 78 (8-5). pp. 83-87. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Fakhrurrazi, Ishak and Nazri, Ali and Azman, Kassim (2016) Tree Induced Suction On Slope Stabilization Analysis. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7204-7208. ISSN 1819-6608. (Published)

Mohd Fakhrurrazi, Ishak and Nazriali, Ali and Azmin, Kassim (2013) The influence of tree induce suction on soil suction profiles. International Journal of Research in Engineering and Technology (IJRET), 2 (9). pp. 187-193. ISSN 2321-7308 (print); 2319-1163 (online). (Published)

Mohd Fakhrurrazi, Ishak and Shaedon, S. and Noor Asiah, Mohamad and M.H., Zainal Abidin (2016) Stabilisation analysis of slope on bauxite mining area. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2587-2591. ISSN 1819-6608. (Published)

Mohd Farid, Ismail and Wan Azmi, Wan Hamzah and Rizalman, Mamat and Sharma, Korada Viswanatha and Nurul Nadia, Mohd Zawawi (2023) Stability assessment of polyvinyl-ether-based TiO2, SiO2 and their hybrid nanolubricants. Lubricants, 11 (23). pp. 1-17. ISSN 2075-4442 (Online). (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat and Hafiz Muhammad, Ali (2023) Thermal and tribological properties enhancement of PVE lubricant modified with SiO2 and tio2 nanoparticles additive. Nanomaterials, 13 (42). pp. 1-18. ISSN 2079-4991. (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat and Sharma, Korada Viswanatha and Ali, Hafiz Muhammad (2023) Extensive stability assessment of TiO/polyvinyl ether nanolubricant with physical homogenization. Lubricants, 11 (67). pp. 1-18. ISSN 2075-4442 (Online). (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat and Sharma, Korada Viswanatha and Ali, Hafiz Muhammad (2023) Extensive stability assessment of tio/polyvinyl ether nanolubricant with physical homogenization. Lubricants, 11 (67). pp. 1-18. ISSN 2075-4442 (Online). (Published)

Mohd Fauzi, Abu Hassan and Ahmad Shahrizan, Abdul Ghani and Dhanesh, Ramachandram and Abduljalil, Radman and Shahrel Azmin, Suandi (2017) Enhancement of Under-Exposed Image for Object Tracking Algorithm Through Homomorphic Filtering and Mean Histogram Matching. Advanced Science Letters, 23 (11). pp. 11257-11261. ISSN 1936-6612. (Published)

Mohd Fauzi, Syafiqah Hanis and Mohd Jamil, Norazaliza (2022) Oxi-P GUI: A Graphical User Interface (GUI) for wastewater treatment process in oxidation pond. Data Analytics and Applied Mathematics (DAAM), 3 (1). pp. 52-60. ISSN 2773-4854. (Published)

Mohd Fawzi, Zamri and Ahmad Razlan, Yusoff (2022) Effect of rake angle and feed rate on tool wear and surface topography for different chip size in machining carbon steels. Jurnal Tribologi, 34 (MITC202ONE (Part 2)). pp. 1-11. ISSN 2289-7232. (Published)

Mohd Hanafi, Abdul Rahim and Mohd Azrul Hisham, Mohd Adib and Nur Hazreen, Mohd Hasni (2020) The comprehensive study of product criteria on infant-wrap (InfaWrap) device: engineering perspective. Journal of Physics: Conference Series, 1529 (052082). pp. 1-9. ISSN 052082. (Published)

Mohd Hanafi, Muhammad Sidik and Saiful Anwar, Che Ghani and Abdul, Nasir and Muhammad Nur Farhan, Saniman (2022) Evaluation of misclassification matrix method in validation of an assistive device for manual wheelchair propulsion. International Journal of Engineering Trends and Technology, 70 (12). pp. 272-280. ISSN 2349-0918. (Published)

Mohd Harizan, Zul and Mahadzir, Ishak and Aiman, Mohd Halil and Ramdziah, Md Nasir and Moinuddin, Mohammed Quazi (2024) Superhydrophobic surface of Ti6Al4V using direct nanosecond laser texturing. Journal of Advanced Research in Micro and Nano Engineering, 17 (1). pp. 117-132. ISSN 2756-8210. (Published)

Mohd Hasnun Ariff, Hassan and Zahari, Taha (2015) Finite Element Analysis of Soccer Heading. Procedia Engineering, 112. pp. 46-51. ISSN 1877-7058. (Published)

Mohd Hasnun Ariff, Hassan and Zahari, Taha and I., Hasanuddin and Anwar, P. P. Abdul Majeed and H., Mustafa and Nur Aqilah, Othman (2020) A simplified human head finite element model for brain injury assessment of blunt impacts. Journal of Mechanical Engineering and Sciences (JMES), 14 (2). 6538 -6547. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Hazreek, Zainal Abidin and Aziman, Madun and Saiful Azhar, Ahmad Tajudin and Mohd Fakhrurrazi, Ishak (2017) Forensic assessment on near surface landslide using electrical resistivity imaging (ERI) at Kenyir lake area in Terengganu, Malaysia. Procedia Engineering, 171. pp. 434-444. ISSN 1877-7058. (Published)

Mohd Helmi, Suid and Mohd Ashraf, Ahmad (2023) A novel hybrid of nonlinear sine cosine algorithm and safe experimentation dynamics for model order reduction. Automatika, 64 (1). pp. 34-50. ISSN 0005-1144. (Published)

Mohd Herwan, Sulaiman and Zuriani, Mustaffa (2024) Hyper-heuristic strategies for optimal power flow problem with FACTS devices allocation in wind power integrated system. Results in Control and Optimization, 14 (100373). pp. 1-21. ISSN 2666-7207. (Published)

Mohd Herwan, Sulaiman and Zuriani, Mustaffa (2022) Optimal chiller loading solution for energy conservation using Barnacles Mating Optimizer algorithm. Results in Control and Optimization, 7 (100109). pp. 1-12. ISSN 2666-7207. (Published)

Mohd Herwan, Sulaiman and Zuriani, Mustaffa (2022) Optimal placement and sizing of FACTS devices for optimal power flow using metaheuristic optimizers. Results in Control and Optimization, 8 (100145). pp. 1-12. ISSN 2666-7207. (Published)

Mohd Herwan, Sulaiman and Zuriani, Mustaffa (2023) An application of improved salp swarm algorithm for optimal power flow solution considering stochastic solar power generation. e-Prime - Advances in Electrical Engineering, Electronics and Energy, 5 (100195). pp. 1-14. ISSN 2772-6711. (Published)

Mohd Herwan, Sulaiman and Zuriani, Mustaffa and Mohd Mawardi, Saari and Hamdan, Daniyal and Mirjalili, Seyedali (2023) Evolutionary mating algorithm. Neural Computing and Applications, 35 (1). pp. 487-516. ISSN 0941-0643. (Published)

Mohd Herwan, Sulaiman and Zuriani, Mustaffa and Mohd Mawardi, Saari and Mohd Shawal, Jadin (2023) A simulation-metaheuristic approach for finding the optimal allocation of the battery energy storage system problem in distribution networks. Decision Analytics Journal, 7 (100208). pp. 1-14. ISSN 2772-6622. (Published)

Mohd Hilmy Naim, Mohd Yakin and Nik Mohamed, Nik Abdullah and Mohd Ruzaimi, Mat Rejab and Nur A., Hashim (2022) 1D peridynamics subjected to quasi-static load with adaptive dynamic relaxation. Journal of Engineering and Technology (JET). pp. 1-4. ISSN 2180-3811. (In Press / Online First) (In Press / Online First)

Mohd Idzaney, Zakaria and Mohd Natashah, Norizan and Muammar, Mohamad Isa and Mohd Faizal, Jamlos and Muslim, Mustapa (2022) Comparative analysis on virtual private network in the internet of things gateways. Indonesian Journal of Electrical Engineering and Computer Science, 28 (1). pp. 488-497. ISSN 2502-4752. (Published)

Mohd Izzat, Mohd Rahman and Mohd Azraai, Mohd Razman and Abdul Majeed, Anwar P. P. and Muhammad Nur Aiman, Shapiee and Muhammad Amirul, Abdullah and Musa, Rabiu Muazu (2023) Unsupervised Fertigation and Machine Learning for Crop Vegetation Parameter Analysis. International Journal of Intelligent Systems and Applications in Engineering (IJISAE), 11 (3). pp. 417-425. ISSN 2147-6799. (Published)

Mohd Jamil, A. W. and Faridah, A. A. and Nor Marzuina, F. K. N. and Zafirah, Z. F. (2019) Accuracy of conventional computations in assessing volume of small diameter logs of hopea odorata. Journal of Tropical Forest Science, 31 (1). pp. 125-133. ISSN 0128-1283. (Published)

Mohd Kamal, Kamarulzaman and Sakinah, Muhamad Hisham and Kadirgama, Kumaran and Ramasamy, Devarajan and Samykano, Mahendran and Said, Zafar and Pandey, Adarsh Kumar (2023) Improvement in stability and thermophysical properties of CNC-MXene nanolubricant for Tribology application. Journal of Molecular Liquids, 381 (121695). pp. 1-16. ISSN 0167-7322. (Published)

Mohd Mawardi, Saari and Mohd Aufa Hadi Putera, Zaini and Mohd Herwan, Sulaiman and Ahmad Salihin, Samsudin and Kiwa, Toshihiko (2024) Defect evaluation in mild steel plate using harmonic ratio induced by square wave excitation field and nonlinear magnetization. IEEE Transactions on Magnetics. pp. 1-5. ISSN 0018-9464. (In Press / Online First) (In Press / Online First)

Mohd Najib, Yacob and Mimi Haryani, Hassim (2017) Comprehensive Review on Risk Assessment Methodologies for HAZMAT Transportation Between 1995-2015. Journal of Advanced Review on Scientific Research, 30 (1). pp. 12-59. ISSN 2289-7887. (Published)

Mohd Nasrun, Mohd Nawi and Ahmad Tarmizi, Haron and Zuhairi, Abd Hamid and Kamarul Anuar, Mohamad Kamar and Yusnizam, Baharuddin (2014) Improving Integrated Practice through Building Information Modeling-Integrated Project Delivery (BIM-IPD) for Malaysian Industrialised Building System (IBS) Construction Projects. Malaysian Construction Research Journal, 15 (2). pp. 1-15. ISSN 1985-3807. (Published)

Mohd Nazif, Baharuddin and Norazwani, Muhammad Zain and Wan Sharuzi, Wan Harun and Eida Nadirah, Roslin and Farizah Adliza, Ghazali and Siti Norzailina, Md Som (2023) Development and performance of particleboard from various types of organic waste and adhesives : A review. International Journal of Adhesion and Adhesives, 124 (103378). pp. 1-9. ISSN 0143-7496. (Published)

Mohd Ramli, Najmuddin and Mahmud, Mohd Sabri and Mohd Zuhan, Mohd Khairul Nizam and Musa, Musfafikri and Razali, Mohd Najib (2022) Synergistic effect of molybdenum disulphide and butylated hydroxytoluene in lithium complex grease. Materials Today: Proceedings, 57 (3). pp. 1415-1421. ISSN 2214-7853. (Published)

Mohd Rashidi, Maarof and Mohd Hasbullah, Idris and Shayfull Zamree, Abd Rahim and Asnul Hadi, Ahmad and Mohd Mustafa Al Bakri, Abdullah and Pietrusiewicz, Paweł and Nabiałek, Marcin G. and Garus, J. (2022) Microstructure and high temperature oxidation of modified ductile ni-resist alloy with higher manganese content. Acta Physica Polonica A, 142 (1). pp. 56-59. ISSN 0587-4246. (Published)

Mohd Razali, Hanipah and Shahin, Mansor and M. R. M., Akramin and A. R., Razali (2019) Design and parametric characterization of flexure bearing as automotive valve spring replacement. Journal of Mechanical Engineering and Sciences (JMES), 13 (1). pp. 4704-4717. ISSN 2231-8380 (online). (Published)

Mohd Ridzuan, Darun and Jamal, Roudaki and Radford, Jack (2015) Forces Shaping Working Capital Management Practices: A Preliminary Study. International Business Management, 9 (3). pp. 310-318. ISSN 1993-5250. (Published)

Mohd Rozaimy, Ridzuan and Jamal Rizal, Razali and Ju, Soon Yew and Noor Amira Syazwani, Abd Rahman and Kong, Lai Kuan (2022) The disaster-resilient smart city in Malaysia: The use of technology in flood management. International Journal of Academic Research in Business and Social Sciences (IJARBSS), 12 (11). 129 -140. ISSN 2222-6990. (Published)

Mohd Sabri, Mahmud and Safinski, Tomasz and Nelson, Mark I. and Sidhu, Harvinder S. and Adesina, Adesoji Adediran (2010) Kinetic Analysis of Oleic Acid Esterification Using Lipase as Catalyst in a Microaqueous Environment. Industrial & Engineering Chemistry Research, 49 (3). pp. 1071-1078. ISSN 1520-5045. (Published)

Mohd Sabri, Mahmud and Sanuri, Ishak and Mohd Najib, Razali and Mohd Aizudin, Abdul Aziz and Musfafikri, Musa (2019) Grease quality issues on middle voltage switchgear: corrosivity resistivity safety and ageing. IIUM Engineering Journal, 20 (1). pp. 216-228. ISSN 1511-788X. (Published)

Mohd Saifuldin, Mokhtar and Ahmad Razlan, Yusoff and Lubis, Muhammad Sobron Yamin (2024) Effect of machining parameters on micro-burrs formation of aluminium puncher using high-speed machining process. Journal of Advanced Research in Applied Mechanics, 115 (1). pp. 47-60. ISSN 2289-7895. (Published)

Mohd Saufi, . and Liyana, Mohamed Yusof and Rahimi, A. Rahman (2023) Complaints and Rectifications During Defect Liability Period: Homebuyer Perspective. Journal of Engineering, Project, and Production Management, 13 (3). pp. 1-11. ISSN 2221-6529. (Published)

Mohd Shamil, Shaari and Urai, Sylvia Dennis and Takahashi, Akiyuki and Mohd Akramin, Romlay (2022) Predicting fatigue crack growth behavior of coalesced cracks using the global-local superimposed technique. Frattura ed Integrita Strutturale, 16 (62). pp. 150-167. ISSN 1971-8993. (Published)

Mohd Syahray Izham, Muhazihat and Nurrina, Rosli and Radhiyah, Abd Aziz and Abdul Aziz, Jaafar (2018) Potential of direct evaporative cooling system under metal plate attachment to wetted pad application. Journal of Modern Manufacturing Systems and Technology, 1. pp. 69-75. ISSN 2636-9575. (Published)

Mohd Syazwan, Mohd Musa and Agi, Augustine Aja and Nwaichi, Peter Ikechukwu and Norida, Ridzuan and Siti Qurratu’ Aini, Mahat (2023) Simulation study of polymer flooding performance : Effect of salinity, polymer concentration in the Malay Basin. Geoenergy Science and Engineering, 228 (211986). pp. 1-11. ISSN 2949-8910. (Published)

Mohd Warid, Hussin and Khairunisa, Muthusamy (2009) Properties of Palm Oil Fuel Ash Cement Based Aerated Concrete Panel Subjected To Different Curing Regimes. Malaysian Journal of Civil Engineering, 21 (1). pp. 17-30. ISSN 1823-7843. (Published)

Mohd Yuhyi, Mohd Tadza and Anis Ayesha, Noraini (2016) Effect of Wildfire on Soil-Water Characteristics of Natural Slope Containing Temperature Sensitive Silica-alumina Polymorph Minerals. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 157-163. ISSN 1991-8178. (Published)

Mohd Yuhyi, Mohd Tadza and Fauzi, Baharudin (2017) Treatment Efficiency And Compressibility Behavior Of Soil Modified With Powdered Activated Carbon. International Journal of GEOMATE, 12 (33). pp. 122-126. ISSN 2186-2982(print); 2186-2990(online). (Published)

Mohd Yuhyi, Mohd Tadza and Hazwani Hawa, Mohammad Sobani and Nur Ain Farhana, Ghani (2015) Characteristics of Struvite Precipitate from Palm Oil Mill Effluent. Journal of Science and Technology in the Tropics, 11 (1). pp. 1-8. ISSN 1823-5034. (Published)

Mohd Yuhyi, Mohd Tadza and Mohd Fazli, Farida Asras and Muhammad Afiq, Mohd Tadza and Jamil, Ismail and Nurhidayah, Mahazam and Nurul Shafiqah, Mohd Azmi (2016) Intrusion of Polyethylene Glycol during Osmotic Tests: Identifying Cellulose Acetate Degrading Microbes. Jurnal Teknologi (Sciences and Engineering), 78 (8-5). pp. 11-16. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Yuhyi, Mohd Tadza and Nor Syafiqah, Mohd Azmi and Roslanzairi, Mustapha and Nor Dalilah, Desa and Kamarudin, Samuding (2017) Malaysian Alternative to International Reference Bentonite Buffer in Underground Nuclear Waste Repository. AIP Conference Proceedings, 1799 (1). pp. 1-6. ISSN 0094-243X. (Published)

Mohd Yuhyi, Mohd Tadza and Nur Ain Farhana, Ghani and Hazwani Hawa, Mohammad Sobani (2016) Evaluation of sludge from coagulation of palm oil mill effluent with chitosan based coagulant. Jurnal Teknologi (Sciences and Engineering), 78 (5-4). pp. 19-22. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Yuhyi, Mohd Tadza and Nurhidayah, Mahazam and Tripathy, Snehasis (2017) An Evaluation of Osmotic Technique Under Ultraviolet Germicidal Irradiation Exposure. International Journal of GEOMATE, 12 (32). pp. 30-36. ISSN 2186-2982(print); 2186-2990(online). (Published)

Mohd Yuhyi, Mohd Tadza and Nurmazuria, Mazelan and Nur Farahana, Yusri and Amizatulhani, Abdullah (2014) Some geotechnical properties of pure and waste gypsum for geoelectrical grounding applications. Civil and Environmental Engineering Reports, 29 (3). pp. 97-106. ISSN 2450-8594. (Published)

Mohd Yuhyi, Mohd Tadza and Tengku Hafidatul Husna, Tengku Anuar and Fadzil, Mat Yahaya (2019) Investigation on Electrically Conductive Aggregates as Grounding Compound Produced by Marconite. Civil and Environmental Engineering Reports, 29 (3). pp. 86-96. ISSN 2450-8594. (Published)

Mohd Yusof, Taib and Hassan, Ibrahim and Azmi, W. H. and M. R. M., Rejab (2018) Thermal analysis of earth-to-air heat exchanger using laboratory simulator. Applied Thermal Engineering, 134. pp. 130-140. ISSN 1359-4311. (Published)

Mohd Yusof, Taib and Hassan, Ibrahim and Azmi, W. H. and M. R. M., Rejab (2018) The thermal characteristics and performance of a ground heat exchanger for tropical climates. Renewable Energy, 121. pp. 528-538. ISSN 0960-1481 . (Published)

Mohd Zaidi, Mohd Tumari and Mohd Ashraf, Ahmad and Ahmad Nor Kasruddin, Nasir (2013) Composite Fuzzy Logic Control Approach to a Flexible Joint Manipulator. International Journal of Advanced Robotic Systems, 10. ISSN 1729-8806 . (Published)

Mohd Zaihidee, Fardila and Mekhilef, Saad and Marizan, Mubin and Rui, Tang Jing and Mohd Zaihidee, Ezrinda (2023) Effects of fractional order on performance of fosmc for speed control of PMSM. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (1). pp. 110-118. ISSN 2462-1943. (Published)

Mohd Zaki, Sharif and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Nurul Nadia, Mohd Zawawi and Hafiz, Muhammad Ali (2023) Viscosity and friction reduction of double end capped polyalkylene glycol nanolubricants for eco friendly refrigerant. Lubricants, 11 (129). pp. 1-17. ISSN 2075-4442 (Online). (Published)

Mohd Zaki, Sharif and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Nurul Nadia, Mohd Zawawi and Hendrawati, Tri Yuni (2023) Stability and thermal conductivity of mono and hybrid nanoparticles dispersion in double-end capped pag lubricant. Lubricants, 11 (1). pp. 1-18. ISSN 2075-4442 (Online). (Published)

Mohd Zuki, Salleh and Imran, Anwar and Sharidan, Shafie (2014) Radiation Effect on MHD Stagnation-Point Flow of a Nanofluid over an Exponentially Stretching Sheet. Walailak Journal of Science and Technology (WJST), 11 (7). pp. 1-23. ISSN 686-3933 (print); 2228-835X (online). (Published)

Mohd. Amirul Hilmi, Mohd Hanoin and Nor Amirah Safiah, Muhamad and Nadzirah, Mohd Mokhtar and Amir, Abdul Razak and Muhamad Sukri, Hadi (2021) Effect of design parameters of serpentine-shaped flat plate solar collector under Malaysia climate conditions. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (1). pp. 71-80. ISSN 2289-7879. (Published)

Mohd. Yamani Idna, Idris and Nor Bakiah, Abd. Warif and Hamzah, Arof and Noorzaily, Mohamed Noor and Ainuddin Wahid, Abdul Wahab and Zaidi, Razak (2019) Accelerating FPGA-surf feature detection module by memory access reduction. Malaysian Journal of Computer Science, 32 (1). pp. 47-61. ISSN 0127-9084. (Published)

Mona Alis, Md Yasser and Zaidi, Embong and Erween, Abd Rahim and Amiril Sahab, Abdul Sani and Kamaruddin, Kamdani (2019) Study of Ionic Liquids (AIL and PIL) Viscosity and its Functional Groups under Heat Treatment on Cutting Tool Surface Using Fourier- Transform Infrared Spectroscopy (FTIR). Materials Science Forum, 981. pp. 98-103. ISSN 1662-9752. (Published)

Monir, Minhaj Uddin and Abd Aziz, Azrina and Hasan, Md. Yeasir and Ahmed, Mohammad Tofayal and Hossain, Md. Alam and A. S. M., Woobaidullah and Biswas, Pradip Kumar and Haque, Md. Nazwanul (2021) Optimization of fuel properties in two different peat reserve areas using surface response methodology and square regression analysis. Biomass Conversion and Biorefinery. pp. 1-21. ISSN 2190-6823. (In Press / Online First) (In Press / Online First)

Monir, Minhaj Uddin and Azrina, Abd Aziz and Kristanti, Risky Ayu and Yousuf, Abu (2018) Gasification of lignocellulosic biomass to produce syngas in a 50 kW downdraft reactor. Biomass and Bioenergy, 119. pp. 335-345. ISSN 0961-9534. (Published)

Monir, Minhaj Uddin and Azrina, Abd Aziz and Risky Ayu, Kristanti and Yousuf, Abu (2018) Syngas Production from Co-gasification of Forest Residue and Charcoal in a Pilot Scale Downdraft Reactor. Waste and Biomass Valorization. pp. 1-17. ISSN 1877-2641. (In Press / Online First) (In Press / Online First)

Monir, Minhaj Uddin and Azrina, Abd Aziz and Yousuf, Abu (2022) Integrated technique to produce sustainable bioethanol from lignocellulosic biomass. Materials Letters: X, 13 (100127). pp. 1-4. ISSN 2590-1508. (Published)

Monir, Minhaj Uddin and Habib, Md. Ahosan and Chowdhury, Shahariar and Techato, Kuaanan and Azrina, Abd Aziz and Phoungthong, Khamphe (2024) Assessing the environmental impact of bituminous coal from Barapukuria Coal Mine: Thermogravimetric, microstructural, and morphological characterization for energy production implications. Journal of Thermal Analysis and Calorimetry, 149 (8). 3379 -3395. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Monir, Minhaj Uddin and Khatun, Fatema and Azrina, Abd Aziz and Vo, Dai-Viet N. (2020) Thermal treatment of tar generated during co-gasification of coconut shell and charcoal. Journal of Cleaner Production, 256 (120305). ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Monir, Minhaj Uddin and Muntasir Shovon, Shaik and Akash, Faysal Ahamed and Habib, Md Ahosan and Techato, Kuaanan and Azrina, Abd Aziz and Chowdhury, Shahariar and Eka Prasetya, Tofan Agung (2024) Comprehensive characterization and kinetic analysis of coconut shell thermal degradation : Energy potential evaluated via the Coats-Redfern method. Case Studies in Thermal Engineering, 55 (104186). pp. 1-11. ISSN 2214-157X. (Published)

Moniruzzaman, M. and Rakib, M. M. and Matin, F. T. (2012) Cr-Ni Alloy Electrodeposition and Comparison with Conventional Pure Cr Coating Technique. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 692-700. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Moshood, Taofeeq D. and Adeleke, A. Q. and Nawanir, Gusman and Sorooshian, Shahryar and Ajibike, W. A. (2021) “I want to serve, but the public does not understand”—An approach to employees’ intention to stay in the Malaysian construction companies. Applied System Innovation, 4 (1). pp. 1-22. ISSN 2571-5577. (Published)

Moshood, Taofeeq D. and Nawanir, Gusman and Mahmud, Fatimah and Fazeeda, Mohamad and Mohd Hanafiah, Ahmad and Airin, AbdulGhani and Kumar, Senthil (2022) Green product innovation: A means towards achieving global sustainable product within biodegradable plastic industry. Journal of Cleaner Production, 363 (132506). pp. 1-17. ISSN 1879-1786. (Published)

Mousay, Mohammed and Chai, Yew Ying and Doh, Shu Ing and Lim, Kar Sing (2021) Degradation of glass fiber reinforced polymer (GFRP) material exposed to tropical atmospheric condition. Key Engineering Materials, 879. pp. 265-274. ISSN 1662-9795. (Published)

Moyo, Tirivavi and Omer, Mazen Mohamed Alkhdar and Chigara, Benviolent (2024) Overlapping sustainable construction indicators for construction organisations in Zimbabwe. Journal of Engineering, Design and Technology. pp. 1-23. ISSN 1726-0531. (Published)

Mudathir Ahmed, Mohamud and Hamidah D., Ibrahim and Fatimah, Sidi and Siti Nurulain, Mohd Rum and Zarina, Dzolkhifli and Xiaowei, Zhang and Lawal, Ma'aruf Mohammed (2023) A systematic literature review of skyline query processing over data stream. IEEE Access, 11. pp. 72813-72835. ISSN 2169-3536. (Published)

Muhamad, N. A. S. and Hanoin, M. A. H. M. and Nadzirah, Mohd Mokhtar and Rosmawati, Naim (2021) Insights into membrane distillation application for textile wastewater treatment – A review. Journal of Applied Membrane Science & Technology, 25 (3). pp. 29-51. ISSN 2600-9226. (Published)

Muhamad Norkhizan, Abdullah and Ahmad Fitri, Yusop and Rizalman, Mamat and Mohd Adnin, Hamidi and Sudhakar, Kumarasamy and Yusaf, Talal (2023) Sustainable biofuels from first three alcohol families : A critical review. Energies, 16 (648). pp. 1-21. ISSN 1996-1073. (Published)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Mat Uzir, Wahit (2023) Effect of hybrid FRP confinement on tin slag polymer concrete compressive strength. International Journal of Engineering and Advanced Technology (IJEAT), 12 (5). pp. 119-126. ISSN 2249-8958 (Online). (Published)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Mat Uzir, Wahit and Nurhadiyanto, Didik (2023) Experimental study on tin slag polymer concrete strengthening under compression with metallic material confinement. Polymers, 15 (817). pp. 1-19. ISSN 2073-4360. (Published)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Mat Uzir, Wahit and S. S., Amirnuddin (2023) Splitting tensile strength study of tin slag polymer concrete. Materials Today : Proceedings. pp. 1-5. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Mat Uzir, Wahit and Selvi Binoj, Joseph and Brailson Mansingh, Bright and Siti Safarah, Amirnuddin and Ali, Alamry and Lim Goh, Kheng and Nurhadiyanto, Didik (2022) Tin slag polymer concrete strengthening by basalt and aramid fiber reinforced polymer confinement. Journal of Polymer Materials, 39 (3-4). pp. 241-253. ISSN 0976-3449, 0973-8622. (Published)

Muhammad, Azam and Sitti Asmah, Hassan and Othman, Che Puan (2022) Autonomous vehicles in mixed traffic conditions—A bibliometric analysis. Sustainability (Switzerland), 14 (10743). pp. 1-34. ISSN 2071-1050. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and Yie, Ling Sin and Khairil, Azman Masri and Ramadhansyah, Putra Jaya and Hyodo, Masayuki and Winter, Michael James (2022) The effect of utilizing silica fume and eggshell ash on the geotechnical properties of soft kaolin clay. Jurnal Teknologi (Sciences and Engineering), 84 (1). pp. 159-170. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Muhammad @ S A Khushren, Sulaiman and Ahmed, El-Shafie and Othman, Karim and Hassan, Basri (2011) Improved Water Level Forecasting Performance by Using Optimal Steepness Coefficients in an Artificial Neural Network. Water Resources Management, 25 (10). pp. 2525-2541. ISSN 0920-4741 (print); 1573-1650 (online). (Published)

Muhammad Aizzat, Zakaria and Jabbar, Waheb A. and Noorazliza, Sulaiman (2023) Development of a smart sensing unit for LoRaWAN-based IoT flood monitoring and warning system in catchment areas. Internet of Things and Cyber-Physical Systems, 3. pp. 249-261. ISSN 2667-3452. (Published)

Muhammad Akmal, Aziz and Aishah, Abdul Jalil and Nurul Sahida, Hassan and Mahadi, Bahari and Abdul Hakim, Hatta and Tuan Amran, Abdullah and Nurfatehah Wahyu, Che Jusoh and Herma Dina, Setiabudi and Saravanan, Rajendran (2024) Kinetic exploration of CO2 methanation over nickel loaded on fibrous mesoporous silica nanoparticles (CHE-SM). Process Safety and Environmental Protection, 186. pp. 1229-1241. ISSN 0957-5820. (Published)

Muhammad Amir Syahiran, Muhammad Tarminzi and Amir, Abdul Razak and Muhammad Amirul Azwan, Azmi and Ahmad, Fazlizan and Zafri Azran, Abdul Majid and Kamaruzzaman, Sopian (2021) Comparative study on thermal performance of cross-matrix absorber solar collector with series and parallel configurations. Case Studies in Thermal Engineering, 25. pp. 1-17. ISSN 2214-157X. (Published)

Muhammad Amirul Azwan, Azmi and Amir, Abdul Razak and Muhammad Amir Syahiran, Muhammad Tarminzi and Ahmad Fadzil, Sharol and Ahmmad Shukrie, Md Yudin and Zafri Azran, Abdul Majid (2023) Hydrodynamics investigations of kaffir lime leaves drying in a swirling solar drying chamber with inclined slotted angle air distributor. CFD Letters, 15 (2). pp. 1-16. ISSN 2180-1363. (Published)

Muhammad Amirul Syafiq, Nasarudin and Abdul Syukor, Abd Razak and Ali Zainal-Abidin, Mohamad Termizi and Nurul Farah Anisa, Hairolnizam and Farah Amalina, Ishak and S., Sulaiman and Mohd Rashid, Ab Hamid and Noraini, Samat (2024) The utilisation and feasibility study of solid waste, palm kernel cake, and trichantera gigantea (ketum ayam) as animal feed for broiler. Construction, 4 (2). pp. 150-155. ISSN 2785-8731. (Published)

Muhammad Arieffuddin, Mohd Jamil and Mohd Yazid, Abu and Sri Nur Areena, Mohd Zaini and Nurul Haziyani, Aris and Nur Syafikah, Pinueh and Nur Najmiyah, Jaafar and Wan Zuki Azman, Wan Muhammad and Faizir, Ramlie and Nolia, Harudin and Emelia Sari, . and Nadiatul Adilah, Ahmad Abdul Ghani (2024) Prediction of rainfall trends using Mahalanobis-Taguchi system. Journal of Engineering and Technological Sciences, 56 (2). pp. 287-303. ISSN 2337-5779. (Published)

Muhammad Ashraf, Fauzi and Khairul Firdaus, Anuar and Rahimi, A. Rahman and Jamaludin, Jupir and Noraina Mazuin, Sapuan (2023) Determinants of project management success: view from an emerging economy. Journal of Engineering, Design and Technology, 21 (4). pp. 1027-1045. ISSN 1726-0531. (Published)

Muhammad Asif, Latif and Ghufran, Rumana and Zularisam, A. W. and Anwar, Ahmad (2011) Integrated application of upflow anaerobic sludge blanket reactor for the treatment of wastewaters. Water Research, 45 (16). pp. 4683-4699. ISSN 0043-1354. (Published)

Muhammad Asyraf Aiman, Ab Rahman and Sharifah Fathiyah, Sy Mohamad and Shahril, Mohamad (2023) Development and characterization of bio-composite films made from bacterial cellulose derived from oil palm frond juice fermentation, chitosan and glycerol. Trends in Sciences, 20 (4919). pp. 1-10. ISSN 2774-0226. (Published)

Muhammad Daniel Haiqal, Mansor and Noor Mazni, Ismail (2022) Compressive strength of the 5cmx5cm coconut empty fruit bunch fiber reinforced cement cubes. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 105-110. ISSN 2636-9575. (Published)

Muhammad Faez Mohamad, Tajudin and Asnul Hadi, Ahmad and Juliawati, Alias and Nur Azhani, Abd Razak and Nasrul Azuan, Alang (2023) Grain refinement in semi-solid metal processing: Current status and recent development. International Journal of Advanced Manufacturing Technology, 124 (5-6). pp. 1379-1399. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Muhammad Faisal, Siddiqui and Zularisam, A. W. and Mimi Sakinah, A. M. (2014) Mitigation of biofouling by reducing biofilm formation and extracellular polymeric substances. Journal of Applied Sciences, 12 (11). pp. 1191-1194. ISSN 1812-5654. (Published)

Muhammad Faisal, Siddiqui and Mimi Sakinah, A. M. and Singh, Lakhveer and Zularisam, A. W. (2012) Targeting N-acyl-homoserine-lactones to Mitigate Membrane Biofouling based on Quorum Sensing using a Biofouling Reducer. Journal of Biotechnology, 161. pp. 190-197. ISSN 0168-1656. (Published)

Muhammad Farhan, Zolkepli and Mohd Fakhrurrazi, Ishak (2017) Exploration of Methods for Slope Stabilization Influence by Unsaturated Soil. Malaysian Journal of Civil Engineering, 29 (2). pp. 121-131. ISSN 1823-7843. (Published)

Muhammad Farhan, Zolkepli and Norlinda, Mohd Rozar and Mohd Fakhrurrazi, Ishak and Mohamad Hazeem, Mohmad Sidik and Nurul Amira Syuhada, Ibrahim and Muhammad Syamsul Imran, Zaini (2021) Slope Mapping using Unmanned Aerial Vehicle (UAV). Turkish Journal of Computer and Mathematics Education, 12 (3). pp. 1781-1789. ISSN 1309-4653. (Published)

Muhammad Hamza, Azam and Muhammad, Nadeem and Sitti Asmah, Hassan and Othman, Che Puan (2023) Impacts of bus only lanes on signalized intersection under heterogeneous traffic conditions. Suranaree Journal of Science and Technology, 30 (010185). pp. 1-11. ISSN 0858-849X. (Published)

Muhammad Hamza, Azam and Sitti Asmah, Hassan and Othman, Che Puan (2022) Autonomous vehicles in mixed traffic conditions—A bibliometric analysis. Sustainability, 14 (10743). pp. 1-34. ISSN 2071-1050. (Published)

Muhammad Hisyam, Abdullah and Mohamad Idris, Ali and Ngien, S. K. (2016) Analysis for Wind Characteristics in Teluk Kalung, Kemaman, Terengganu. International Journal of Science, Environment and Technology, 5 (6). pp. 3827-3833. ISSN 2277-663X (print); 2278-3687 (online). (Published)

Muhammad Hisyam, Abdullah and Mohamad Idris, Ali and Ngien Su, Kong (2016) Analysis for wind characteristics in Teluk Kalung, Kemaman, Terengganu. International Journal of Science, Environment, 5 (6). pp. 3827-3833. ISSN 2278-3687. (Published)

Muhammad Izzat, Zakaria and Jabbar, Waheb A. and Noorazliza, Sulaiman (2023) Development of a smart sensing unit for LoRaWAN-based IoT flood monitoring and warning system in catchment areas. Internet of Things and Cyber-Physical Systems, 3. pp. 249-261. ISSN 2667-3452. (Published)

Muhammad Izzuddin Akmal, Zamri and Muhamad Sukri, Hadi and Aida Nur Syafiqah, Shaari and Nadzirah, Mohd Mokhtar (2022) Proportional integral derivative controller based on ant colony optimization for vibration cancellation of horizontal flexible plate structure. International Journal of Electrical and Computer Engineering, 12 (4). pp. 3583-3594. ISSN 2088-8708. (Published)

Muhammad Khairol Annuar, Zaini and Lee, Yen-Sian and Nurazima, Ismail and Lim, Kok-Sing and Udos, Waldo and Mohd Hafizi, Zohari and Yang, Hang-Zhou and Harith, Ahmad (2019) In-fiber Fabry Perot interferometer with narrow interference fringes for enhanced sensitivity in elastic wave detection. Optical Fiber Technology, 53. pp. 1-2. ISSN 1068-5200. (Published)

Muhammad Khairus Sholihin, Bak and Nor Hazurina, Othman and Muhammad Shabery, Sainudin and Faisal, Sheikh Khalid and Khairunisa, Muthusamy (2020) Utilisation of mussel shell ash and palm oil leaves ash as admixture in concrete. International Journal of Integrated Engineering, 12 (8). pp. 310-317. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Muhammad Nazrin Akmal, Ahmad Zawawi and Khairunisa, Muthusamy and Anwar, P. P. Abdul Majeed and Musa, Rabiu Muazu and Budiea, Ahmed Mokhtar Albshir (2020) Mechanical properties of oil palm waste lightweight aggregate concrete with fly ash as fine aggregate replacement. Journal of Building Engineering, 27. pp. 1-20. ISSN 2352-7102. (Published)

Muhammad Nura, Isa and Hanizam, Awang and Khairunisa, Muthusamy (2023) A potential environmental sustainability of wood ash in normal and geopolymer concrete – A Review. Advances in Science and Technology Research Journal, 17 (4). pp. 1-20. ISSN 2299-8624. (Published)

Muhammad Nur’ Hafiz, Rozaini and Nadhiratul Farihin, Semail and Zango, Zakariyya Uba and Lim, Jun Wei and Noorfatimah Fatimah, Yahaya and Herma Dina, Setiabudi and Tong, Woei Yenn and Rashid, Shamsuddin and Chan, Yi Jing and Khoo, Kuan Shiong and Suliman, Muath and Kiatkittipong, Worapon (2023) Advanced adsorptions of non-steroidal anti-inflammatory drugs from environmental waters in improving offline and online preconcentration techniques : An analytical review. Journal of the Taiwan Institute of Chemical Engineers (105020). pp. 1-17. ISSN 1876-1070. (In Press / Online First) (In Press / Online First)

Muhammad Ridwan Syahmi, Halim and Khairil Azman, Masri and Putra Jaya, Ramadhansyah and Mazlan, Abu Seman and Abdullah, Baqadeem Abdullah Omar (2023) Mechanical properties of stone mastic asphalt incorporating glass fiber. Open Civil Engineering Journal, 17 (e18741495230619). pp. 1-8. ISSN 1874-1495. (Published)

Muhammad Shafinaim Akmal, Zulkifli and Ahmad Shahrizan, Abdul Ghani and Mohd Yazid, Abu and Fusaomi, Nagata (2023) Development of controllino program to integrate the sensor inputs for motors control. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 36-45. ISSN 2637-0883. (Published)

Muhammad Sheraz, Ahmad and Ng, Kim Hoong and Chen, Ching-Lung and Kabir, Faryal and Witoon, Thongthai and Wu, Ta Yeong and Cheng, Chin Kui (2023) Nitrogen-phosphorous co-doped palladium electrocatalyst for glycerol electro-oxidation reaction (GEOR): An efficient system for mesoxalic acid and dihydroxyacetone production. Fuel, 333 (126471). ISSN 0016-2361. (Published)

Muhammad Syafiq, Idris and Irnie Azlin, Zakaria and Putri Nur Afiqah, Nazari and Wan Ahmad Najmi, Wan Mohamed and Wan Azmi, Wan Hamzah (2023) Performance of hybrid Al2O3:SiO2 W:EG in PEM fuel cell distributor plate. Journal of Mechanical Engineering, 20 (3). pp. 335-354. ISSN 1823-5514. (In Press / Online First) (In Press / Online First)

Muhammad Syafiq, Idris and Irnie Azlin, Zakaria and Wan Azmi, Wan Hamzah (2024) Water : Ethylene glycol properties alteration upon dispersion of Al2O3 and SiO2 nanoparticles. Journal of Mechanical Engineering, 21 (1). pp. 277-1255. ISSN 1823-5514. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan (2024) Efect of alstonia angustiloba tree moisture absorption on the stabilization of unsaturated residual soil slope. International Journal of Environmental Science and Technology. pp. 1-20. ISSN 1735-1472(Print); 1735-2630(Online). (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan (2023) Effectiveness of Silica Fume Eggshell Ash and Lime Use on the Properties of Kaolinitic Clay. International Journal of Engineering and Technology Innovation (IJETI), 13 (4). pp. 337-352. ISSN ISSN 2223-5329 (Print), ISSN 2226-809X (Online). (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan (2023) Effects of Industrial and Agricultural Recycled Waste Enhanced with Lime Utilisation in Stabilising Kaolinitic Soil. International Journal of Sustainable Construction Engineering and Technology, 14 (4). pp. 332-353. ISSN 2180-3242. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan (2024) Shear strength of soft soil reinforced with singular bottom ash column. Construction, 4 (1). pp. 82-90. ISSN 2785-8731. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan (2024) Stabilization of expansive soil using silica fume and lime. Construction, 4 (1). pp. 41-51. ISSN 2785-8731. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and Ain Syaheera, Zulkafli (2024) Basic and morphological properties of Bukit Goh bauxite. Construction, 4 (2). pp. 135-139. ISSN 2785-8731. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and Almuaythir, Sultan and Hyodo, Masayuki (2024) Experimental investigations on physico-mechanical properties of kaolinite clay soil stabilized at optimum silica fume content using clamshell ash and lime. Scientific Reports, 14 (10955). pp. 1-20. ISSN 2045-2322. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and Muhammad Farhan, Zolkepli (2023) Influence of Alstonia Angustiloba tree water uptake on slope stability: A case study at the unsaturated slope, Pahang, Malaysia. Bulletin of the Geological Society of Malaysia, 75. pp. 37-55. ISSN 0126-6187. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and Muhammad Farhan, Zolkepli (2021) Urban landfills investigation for leachate assessment using electrical resistivity imaging in Johor, Malaysia. Environmental Challenges, 6 (100415). pp. 1-10. ISSN 2667-0100. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and Muhammad Khairul Faiz, Jamal (2024) Strength of Problematic Soil Stabilised with Gypsum and Palm Oil Fuel Ash. Construction, 4 (2). pp. 170-175. ISSN 2785-8731. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and Nuraini, Yusuf (2024) Strength and Compressibility of Soft Clay Reinforced with Group Crushed Polypropylene Columns. Construction, 4 (2). 186 -192. ISSN 2785-8731. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and Sultan, Almuaythir (2024) Experimental study on the use of polyoxymethylene plastic waste as a granular column to improve the strength of soft clay soil. Scientific Reports, 14 (22558 (2024)). pp. 1-24. ISSN 2045-2322. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and Wafiyuddin, Md Jariman (2024) Strength of kaolinitic clay soil stabilized with lime and palm oil fuel ash. Construction, 4 (1). pp. 77-84. ISSN 2785-8731. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and Wan Nur Syafiqah, Wan Jusoh (2023) Utilization of bottom ash waste as a granular column to enhance the lateral load capacity of soft kaolin clay soil. Environmental Science and Pollution Research. ISSN 1614-7499. (Published)

Muhammad Tahir, Lakhiar and Noridah, Mohamad and Abdul Aziz, Abdul Samad and Khairunisa, Muthusamy and Md Azree, Othuman Mydin and Goh, W. I. and George, Steafenie (2021) Effect of banana skin powder and coir fibre on properties and flexural behaviour of precast SCC beam. International Journal of Sustainable Engineering, 14 (5). pp. 1193-1206. ISSN 1939-7046. (Published)

Muhammad Zubir, Yusof and Muhammad Zahir, Ramli and Siti Fairuz, Che Othman and Yusairah Amani, Mohd Aliziyad and Juliana, Mohamed and Muhammad Faiz, Pa'suya and Abdul Nasir, Abd Ghafar and Jabbar, Waheb A. (2023) Public understanding of rip current and beach safety at Teluk Cempedak Recreational Beach in Pahang, Malaysia. Natural Hazards, 115 (1). pp. 489-506. ISSN 0921-030X. (Published)

Muhammad Zul Fikri, Mohd Zureehan and Lee, Khai Loon (2022) The effect of top management support and collaborative team on project performance in Malaysian construction industry: Moderating effect of trust. International Journal of Industrial Management (IJIM), 13 (1). pp. 422-437. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Muhd Norhasri, Muhd Sidek and Hamidah, Mohd Saman and Mohd Fadzil, Arshad and Putra Jaya, Ramadhansyah and Mohd Faizal, Md Jaafar and Siti Rahimah, Rosseli and Hafizah, Muhamad Azlan (2021) Strength and durability properties of nanometakolined ultra high performance concrete (UHPC) using response surface model (RSM) approach. Malaysian Construction Research Journal, 14 (3). pp. 138-149. ISSN 1985-3807. (Published)

Mujasam Batoo, Khalid and Ali Naeem, Youssef and Haithem Zaki, Shaima and Chandra, Subhash and Abdali Abdulridui, Hussam and Ahmed Ibrahim, Ahmed and Zazoum, Bouchaib and Khazaal, Waleed Mohammed and Falih, Khaldoon T. and Hasan Kadhum, Eftikhaar and Ali Ahmed, Batool and Alzubaidi, Laith H. and Reza, Shariyati (2024) Modeling ionic liquids mixture viscosity using Eyring theory combined with a SAFT-based EOS. Chemical Engineering Science, 291 (119932). pp. 1-24. ISSN 0009-2509. (Published)

Mukta, Marufa Y. and Rahman, Md. Arafatur and Asyhari, A. Taufiq and Bhuiyan, Md. Zakirul Alam (2020) IoT for energy efficient green highway lighting systems: Challenges and issues. Journal of Network and Computer Applications, 185 (102575). pp. 1-16. ISSN 1084-8045. (Published)

Munanday, Anbananthan Pillai and Norazlianie, Sazali and Asogan, Arjun and Ramasamy, Devarajan and Ahmad Shahir, Jamaludin (2023) The Implementation of Transfer Learning by Convolution Neural Network (CNN) for Recognizing Facial Emotions. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 255-276. ISSN 2462-1943. (Published)

Munianday, Praveena and Rahimi, A. Rahman and Muneera, Esa (2023) Case study on barriers to building information modelling implementation in Malaysia. Journal of Facilities Management, 21 (4). pp. 511-534. ISSN 1472-5967. (Published)

Murad, Saydul Akbar and Adhikary, Apurba and Muzahid, Abu Jafar Md and Sarker, Md. Murad Hossain and Khan, Md. Ashikur Rahman and Hossain, Md. Bipul and Bairagi, Anupam Kumar and Masud, Mehedi and Kowsher, Md. (2022) AI powered asthma prediction towards treatment formulation : An android app approach. Intelligent Automation and Soft Computing, 34 (1). pp. 87-103. ISSN 1079-8587. (Published)

Murad, Saydul Akbar and Zafril Rizal, M. Azmi and Muzahid, Abu Jafar Md and Bhuiyan, Md Khairul Bashar and Saib, Md and Rahimi, Nick and Prottasha, Nusrat Jahan and Bairagi, Anupam Kumar (2024) SG-PBFS : Shortest Gap-Priority Based Fair Scheduling technique for job scheduling in cloud environment. Future Generation Computer Systems, 150. pp. 232-242. ISSN 0167-739X. (Published)

Murad, Saydul Akbar and Zafril Rizal, M. Azmi and Muzahid, Abu Jafar Md and Sarker, Md Murad Hossain and Miah, M. Saef Ullah and Bhuiyan, Md Khairul Bashar and Rahimi, Nick and Bairagi, Anupam Kumar (2024) Priority based job scheduling technique that utilizes gaps to increase the efficiency of job distribution in cloud computing. Sustainable Computing: Informatics and Systems, 41 (10094). pp. 1-12. ISSN 2210-5379. (Published)

Musa, Rabiu Muazu and Hassan, Isyaku and Mohamad Razali, Abdullah and Mohd Nazri Latiff, Azmi and Abdul Majeed, Anwar P. P. and Noor Azuan, Abu Osman (2021) Surveillance of injury types, locations, and intensities in male and female tennis players: A content analysis of online newspaper reports. International Journal of Environmental Research and Public Health, 18 (23). pp. 1-10. ISSN 1661-7827. (Published)

Mustafa, Hauwa Mohammed and Hayder, Gasim and Abba, S.I. and Algarni, Abeer D. and Mnzool, Mohammed and Nour, Abdurahman H. (2023) Performance evaluation of hydroponic wastewater treatment plant integrated with ensemble learning techniques : A feature selection approach. Processes, 11 (478). pp. 1-16. ISSN 2227-9717. (Published)

Mustafa, Muhammad Hadi and Mohd Rahim, Faizul Azli and Lee, Chia Kuang (2023) The Role of 5D Building Information Modelling in Construction Project Cost Management: An Overview and Future Directions. Journal of Project Management Practice (JPMP), 3 (1). pp. 95-112. ISSN 2600-7533. (Published)

Muthanna Husham , Alfityan and A., Zulkiple Transition Curves for Roads Designers Manual. Transition Curves for Roads Designers Manual. pp. 1-8. (Published)

Muzamir, Hasan and Ahmad Amirul, Faez and M. Azizul, Moqsud and Tam, Weng Long and Phang, Biao Yu (2018) Geotechnical Properties Of Raw And Processed Bauxite From Bukit Goh, Kuantan, Pahang; In Accordance With IMSBC Code. International Journal of GEOMATE, 14 (42). pp. 8-13. ISSN 2186-2982 (print); 2186-2990(online). (Published)

Muzamir, Hasan and Alrubaye, Ali Jamal and Leong, Kah Seng and Mohammad Syafiq, Ideris and Aminaton, Marto (2016) Undrained Shear Strength of Soft Clay Mixed With Different Percentages of Lime and Silica Fume. Jurnal Teknologi (Sciences and Engineering), 78 (8-5). pp. 23-30. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Muzamir, Hasan and Ieszaliana, Ali and Hyodo, Masayuki (2019) Strength of soft clay reinforced with 10 mm single crushed coconut shell (CCS) column. International Journal of GEOMATE, 17 (63). pp. 353-359. ISSN 2186-2982 (print); 2186-2990(online). (Published)

Muzamir, Hasan and Kwan, Hui Yee and Muhammad Fat-hi, Al Juwaini Pahrol and Hyodo, Masayuki (2019) Shear Strength of Soft Clay Reinforced With Encased Lime Bottom Ash Column (ELBAC). International Journal of GEOMATE, 16 (57). pp. 62-66. ISSN 2186-2982 (print); 2186-2990(online). (Published)

Muzamir, Hasan and Muhammad Syamsul Imran, Zaini and Ling, Sin Yie and Khairil Azman, Masri and Putra Jaya, Ramadhansyah and Hyodo, Masayuki and Winter, Michael James (2021) Effect of Optimum Utilization of Silica Fume and Eggshell Ash to the Engineering Properties of Expansive Soil. Journal of Materials Research and Technology, 14. pp. 1401-1418. ISSN 2238-7854. (Published)

Muzamir, Hasan and Norhayani, Pangee @ Mohd Nor and Suki, Suzillco (2016) Shear Strength of Soft Clay Reinforced with Single Encased Bottom Ash Columns. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1562-1569. ISSN 1819-6608. (Published)

Muzamir, Hasan and Nurul Aina, Husaini and Norhayani, Pangee @ Mohd Nor (2017) Shear Strength of Clay Reinforced With Square and Triangular Arrangement of Group Encapsulated Bottom Ash Columns. International Journal of GEOMATE, 12 (33). pp. 127-133. ISSN 2186-2982 (print); 2186-2990(online). (Published)

Muzamir, Hasan and Siti Hajar, Aziz and Wan Nursyafiqah, Wan Jusoh (2017) Basic Properties of Gebeng Bauxite in Accordance to IMSBC Code. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Muzamir, Hasan and Wan Nursyafiqah, Wan Jusoh and Wong, Suk Chee and Hyodo, Masayuki (2018) The undrained shear strength of soft clay reinforced with group encapsulated lime bottom ash columns. International Journal of GEOMATE, 14 (46). pp. 46-50. ISSN 2186-2982 (print); 2186-2990(online). (Published)

N H, Ibrahim and W H, W Ibrahim and Mimi Sakinah, A.M. and N Harun, Harun and Mohamad Rizza, Harun (2017) Simulation of dilute acid hydrolysis of wood sawdust for xylose production using aspen plus. Australian Journal of Basic and Applied Sciences, 11 (3). pp. 114-119. ISSN 1991-8178. (Published)

N Thevagar, Nedunchelian and Muzamir, Hasan (2023) Shear strength of soft clay reinforced with acrylonitrile butadiene styrene (ABS) column. ASEAN Engineering Journal, 13 (4). pp. 139-147. ISSN 2586-9159. (Published)

N., Rusli and M. A., Amzar Kamarudin and S. W., Ahmad (2022) The evaluation of double story building considering earthquake. Construction, 2 (1). pp. 144-148. ISSN 2785-8731. (Published)

N. A., Johari and J., Alias and A., Zanurin and N. S., Mohamed, and N. A., Alang and M. Z., M. Zain (2022) Recent progress of self-healing coatings for magnesium alloys protection. Journal of Coatings Technology and Research, 19 (3). pp. 757-774. ISSN 1547-0091. (Published)

N. A. A., Razali and N. M. A., Ghani and B. S., Bari (2021) Lifting and stabilizing of two-wheeled wheelchair system using interval type-2 fuzzy logic control based spiral dynamic algorithm. Bulletin of Electrical Engineering and Informatics, 10 (6). pp. 3019-3031. ISSN 2089-3191. (Published)

N. A. S., Muhamad and N. M., Mokhtar and W. J., Lau and A. F., Ismail and R., Naim (2022) Fouling studies on hydrophobic PVDF-bentonite hollow fiber membrane during membrane distillation of palm oil mill effluent. Journal of Water Process Engineering, 49 (102969). pp. 1-11. ISSN 2214-7144. (Published)

N. Aishah, Abdul-Rahman and Abdul Rahimi, Abdul Rahman and Ahmad Rizal, Alias (2024) Modeling the construction readiness parameters for abandoned housing projects in Malaysia: PLS-SEM approach. Open House International, ahead-of-print (ahead-of-print). pp. 1-23. ISSN 0168-2601. (In Press / Online First) (In Press / Online First)

N. M., Yahya and Tokhi, M. Osman and Kasdirin, Hyreil Anuar (2016) A New Bats Echolocation-based Algorithm for Single Objective Optimisation. Evolutionary Intelligence, 9 (1). pp. 1-20. ISSN 1864-5909 (Print); 1864-5917 (Online). (Published)

N. N. A., Tukimat and N. A., Ahmad Syukri and M. A., Malek (2019) Projection the long-term ungauged rainfall using integrated Statistical Downscaling Model and Geographic Information System (SDSM-GIS) model. Heliyon, 5 (9). pp. 1-8. ISSN 2405-8440. (Published)

N. Q., Radzuan and Mohd Hasnun Ariff, Hassan and Mohd Nadzeri, Omar and Nur Aqilah, Othman and M. A., Mohamad Radzi and K. A., Abu Kassim (2023) The effect of motorcycle helmet type on head response in oblique impact. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10786-10797. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N. S., Mohamed, and J., Alias and N. A., Johari and N. A., Alang and A H., Ahmad (2022) Development of smart self-healing coating for the corrosion protection of magnesium alloys: a brief review. Journal of Adhesion Science and Technology. ISSN 0169-4243. (In Press / Online First) (In Press / Online First)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama and D., Ramasamy and M. A., Maleque and M. M., Noor (2017) Experimental Investigation On The Performance Of The Tio2 And Znohybrid Nanocoolant In Ethylene Glycol Mixture Towards AA6061-T6 Machining. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3913-3926. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N.A.S, Muhamad and Nadzirah, Mohd Mokhtar and Rosmawati, Naim and Lau, Woei Jye and A.F., Ismail (2019) A review of membrane distillation process: - Before, during and after testing. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 62-81. ISSN 2289-697X (Print); 2462-1269 (Online). (Published)

N.S.A, Samsudin and Adeleke, A. Q. and Ajibike, W. A. (2020) Effects Of Contractors’ Delay Factors On Building Project Performance Among Kuantan Malaysian Construction Industry. Social Science and Humanities Journal, 4 (1). pp. 1705-1715. ISSN 2456-2653. (Published)

Nabilah, Mamat and Kusbiantoro, Andri and Norbaizurah, Rahman (2018) Hydrochloric acid based pre-treatment on paper mill sludge ash as an alternative source material for geopolymer. Materials Today: Proceedings, 5 (10 Part 2). pp. 21825-21831. ISSN 2214-7853. (Published)

Nabilla, Mohamad and Khairunisa, Muthusamy and Hanis Nadiah, Ruslan (2022) A Review on fresh concrete, thermal conductivity, and permeability properties of concrete containing cockle shell. International Journal of Sustainable Building Technology and Urban Development, 13 (1). pp. 11-22. ISSN 2093-7628. (Published)

Nadhilah Aqilah, Shahdan and Balasundram, Vekes and Norazana, Ibrahim and Ruzinah, Isha and Zainuddin, Abdul Manan (2022) Catalytic Co-pyrolysis of empty fruit bunch and high-density polyethylene mixtures over rice husk ash : Thermogravimetric, kinetic and thermodynamic analyses. Cleaner Engineering and Technology, 9 (100538). pp. 1-8. ISSN 2666-7908. (Published)

Nadiah, Mokhtar and Azmi, Aris and Edriyana, Abd Aziz and W. F. W., Ishak and Hasmanie, Abdul Halim and Najiha, Johari and Syazwan, N. Moni (2018) Removal of Methylene Blue by Red Macro Alga Euchema Spinosum Sp.: Pretreatment and Desorption Assessment. International Journal of Engineering & Technology, 7 (4.35). pp. 578-582. ISSN 2227-524X. (Published)

Nadiah, Mokhtar and Edriyana, Abd Aziz and Azmi, Aris and Syazwan, N.moni (2020) Biosorption of cationic and anionic azo dye onto red macro alga: euchema spinosum. determination of the optimal experimental variables using resolution V fractional factorial design. Physics and Chemistry of the Earth, Parts A/B/C. ISSN 1474-7065. (Unpublished) (Unpublished)

Nadiah, Mokhtar and Edriyana, Abd Aziz and Azmi, Aris and W. F. W., Ishak and Anwar, P. P. Abdul Majeed and Syazwan, N. Moni and Siti Kamariah, Md Sa’at (2018) Comparative Prediction of Red Alga Biosorbent Performance in Dye Removal using Multivariate Models of Response Surface Methodology (RSM) and Artificial Neural Network (ANN). International Journal of Engineering & Technology, 7 (4.35). pp. 551-559. ISSN 2227-524X. (Published)

Nadiah, Mokhtar and Edriyana, Aziz and Azmi, Aris and Hafiza, Shukor and Syazwani, Mohd Zaki (2024) Biosorption of anionic and cationic azo dye onto red macro alga : Determination of the significant variables using resolution V fractional factorial design. Physics and Chemistry of the Earth, 134 (103593). pp. 1-12. ISSN 1474-7065. (Published)

Nadiatul Adilah, Ahmad Abdul Ghani (2016) Investigation into the robustness of evolutionary programming regression for sedimentation study. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1555-1561. ISSN 1819-6608. (Published)

Nadiatul Adilah, Ahmad Abdul Ghani and Duratul Ain, Tholibon and Junaidah, Ariffin (2019) Robustness analysis of model parameters for sediment transport equation development. ASM Science Journal, 12. pp. 1-17. ISSN 1823-6782. (Published)

Nadiatul Adilah, Ahmad Abdul Ghani and Mohamed, A. Shahin and Hamid, R. Nikraz (2012) Use of Evolutionary Polynomial Regression (EPR) for Prediction of Total Sediment Load of Malaysian Rivers. International Journal of Engineering, 6 (5). pp. 265-277. (Published)

Nadiatul Adilah, Ahmad Abdul Ghani and N. Syamimi, Namin and Norashikin, A. Kamal and Duratul Ain, Tholibon and Junaidah, Ariffin (2018) Study on Characteristic of Bed Material and Bed Load Discharge in Sungai Jemberau, Tasik Chini. ASM Science Journal, 11 (S2). pp. 246-252. ISSN 1823-6782. (Published)

Nadiatul Adilah, Ahmad Abdul Ghani and Noor Asiah, Mohamad and Teo, Wei Hui (2016) Rainfall Analysis to Determine the Potential of Rainwater Harvesting Site in Kuantan, Pahang. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7264-7268. ISSN 1819-6608. (Published)

Nadiatul Adilah, Ahmad Abdul Ghani and Norasman, Othman and Mohd Khairun Hafiz, Baharudin (2013) Study on Characteristics of Sediment and Sedimentation Rate at Sungai Lembing, Kuantan, Pahang. Procedia Engineering, 53. pp. 81-92. ISSN 1877-7058. (Published)

Nadzirah, Mohd Mokhtar and N. A.S., Muhamad and Lau, W. J. and Ismail Fauzi, A.F. and Rosmawati, Naim (2023) Comparative study on membrane distillation application between raw POME and POMSE. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Najib, Mukhtar and Mohd Rosli, Mohd Hasan and Khairul Anuar, Shariff and Mohd Fahmi Haikal, Mohd Ghazali and Wadea, Sindi and Putra Jaya, Ramadhansyah (2023) Evaluating and quantifying the variations and sensitivity in asphalt-filler interaction indices. Physics and Chemistry of the Earth, Parts A/B/C (103480). pp. 1-29. ISSN 1474-7065. (In Press / Online First) (In Press / Online First)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff and K., Kadirgama (2012) Investigation of Flow Behavior in Minimum Quantity Lubrication Nozzle for End Milling Processes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 768-776. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Najiyah Safwa, Khashi'ie and Iskandar, Waini and Abdul Rahman, Mohd Kasim and Nurul Amira, Zainal and Anuar, Ishak and Pop, Ioan (2022) Magnetohydrodynamic and viscous dissipation effects on radiative heat transfer of non-newtonian fluid flow past a nonlinearly shrinking sheet: Reiner–Philippoff model. Alexandria Engineering Journal, 61 (10). pp. 7605-7617. ISSN 1110-0168. (Published)

Najmi Haziq, Badrulhisam and Muhammad Yusri, Ismail and Abdul Adam, Abdullah and Awad, Omar I. and Sharma, Ravi Kumar and Sawangsri, Worapong (2024) Optimisation of POME biodiesel with isobutanol additive to cater UN sustainable development goal on affordable and clean energy. Thermal Science and Engineering Progress, 51 (102618). pp. 1-23. ISSN 2451-9049. (Published)

Namdar, Abdoullah and Fadzil, Mat Yahaya (2014) Effect of Cellulose-Ibeta Presence in Sawdust on Compressive Strength of Cement Paste. Modern Applied Science, 8 (2). pp. 107-113. ISSN 1913-1844 (printed), 1913-1852 (online). (Published)

Namdar, Abdoullah and Fadzil, Mat Yahaya (2014) Effect of Natural Hazards on Types of Landslide. The Electronic Journal of Geotechnical Engineering (EJGE), 19. pp. 1519-1632. ISSN 1089-3032. (Published)

Namdar, Abdoullah and Fadzil, Mat Yahaya (2014) Enhancement of Cement Mortar Mechanical Properties with Replacement of Seashell Powder. International Journal of Civil, Architectural Science and Engineering, World Academy of Science, Engineering and Technology, 8 (2). pp. 47-50. ISSN 2010-376x (print), 2010-3778 (online). (Published)

Namdar, Abdoullah and Fadzil, Mat Yahaya (2014) Oil Palm Shell Ash - Cement Mortar Mixture and Modification of Mechanical Properties. International Journal of Civil, Architectural Science and Engineering, World Academy of Science, Engineering and Technology, 8 (2). pp. 51-53. ISSN 2010-376x (print), 2010-3778 (online). (Published)

Namdar, Abdoullah (2014) Maintain Of Environment From Affection Of CO2 ‐ A Review. Annals of Faculty Engineering Hunedoara - International Journal of Engineering, XII (3). pp. 117-124. ISSN 1584‐2673. (Published)

Namdar, Abdoullah and Berto, Filippo and Nurmunira, Muhammad (2022) The displacement simulation for cracked earth structure with different geometry. Procedia Structural Integrity, 41. pp. 394-402. ISSN 2452-3216. (Published)

Namdar, Abdoullah and Ideris, Zakaria and Pelko, Azam Khodashenas and Nurmunira, Muhammad (2014) Natural Mineral for Improving Concrete Compressive Strength. Advanced Materials Research, 875-87. pp. 1490-1494. ISSN 1662-8985. (Published)

Namdar, Abdoullah and Mehran, Karimpour-Fard and Filippo, Berto and Nurmunira, Muhammad (2023) Prediction of the displacement mechanism of the cracked soil using NXFEM and Artificial Neural Networks. Procedia Structural Integrity, 47. pp. 636-645. ISSN 2452-3216. (Published)

Namdar, Abdoullah and Mehran, Karimpour-Fard and Nurmunira, Muhammad (2022) The seismic resistance simulation for cracked clayey backfill. Engineering Failure Analysis, 140 (106616). pp. 1-14. ISSN 1350-6307. (Published)

Namdar, Abdoullah and Mughieda, Omer S. and Ts Haji Azahar, Mohd Yasin and Azhar, Falak (2024) Impact of earthquake’s epicenter distance on the failure of the embankment – A seismic prediction. Frattura ed Integrit� Strutturale, 18. pp. 118-136. ISSN 1971-8993. (Published)

Namdar, Abdoullah and Omer, Mughieda and Filippo, Berto and Nurmunira, Muhammad (2023) Crack simulation for the cover of the landfill – A seismic design. Frattura ed Integrità Strutturale, 17 (65). pp. 112-134. ISSN 1971-8993. (Published)

Nandikes, Gopa and Pathak, Pankaj and Abdul Syukor, Abd Razak and Narayanamurthy, Vigneswaran and Singh, Lakhveer (2022) Occurrence, environmental risks and biological remediation mechanisms of Triclosan in wastewaters : Challenges and perspectives. Journal of Water Process Engineering, 49 (103078). pp. 1-15. ISSN 2214-7144. (Published)

Narayanamurthy, Vigneswaran and Jeroish, Z E. and Bhuvaneshwari, K. S. and Fahmi, Samsuri (2021) Hepatitis C virus (HCV) diagnosis via microfluidics. Analytical Methods, 13 (6). pp. 740-763. ISSN 1759-9660 (print); 1759-9679 (online). (Published)

Naseer, Abqaat and Faiz, Ahmad and Aslam, Muhammad and Beh, Hoe Guan and Wan Sharuzi, Wan Harun and Norhamidi, Muhamad and Muhammad Rafi, Raza and German, Randall M. (2019) A review of processing techniques for graphene-reinforced metal matrix composites. Materials and Manufacturing Processes, 34 (9). pp. 957-985. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

Nasir, Shafiq and Chin, Siew Choo and Mohd Hasnain, Isa (2018) Effects of used engine oil on slump, compressive strength and oxygen permeability of normal and blended cement concrete. Construction and Building Materials, 187. pp. 178-184. ISSN 0950-0618. (Published)

Nasly, Mohamed Ali and Abu Azam, Md Yassin and Zahrizan, Zakaria and Khairunisa, Muthusamy (2010) Compressed Stabilised Earth as Load Bearing Interlocking Block. International Journal of Civil Engineering and Geo-Environmental, 1 (1). pp. 1-9. ISSN 21802742. (Published)

Nasly, Mohamed Ali and Nima, Amani and Roslida, Abdul Samat (2011) Developing a Framework of Economic Model for Building Component Lifecycle Repair. Advanced Materials Research, 255-26. pp. 3893-3897. ISSN 1022-6680. (Published)

Nasly, Mohamed Ali and Saher, Faisal Nadeem (2013) A Visual Aided DSS Prototype Development to Mitigate the Flood Hazards. American Journal of Geographic Information System, 2 (3). pp. 37-46. ISSN 2163-1131 (print), 2163-114X (online). (Published)

Nasly, Mohamed Ali and Hossain, Mohamed Amjed and Islam, Mir Sujaul (2013) Source Apportionment and Quality Assessment of Surface Water Using Principal Component Analysis and Multiple Linear Regression statistics. Environment Conservation Journal, 14 (3). pp. 9-16. ISSN 0972-3099 (Print), 2278-5124 (Online). (Published)

Nasly, Mohamed Ali and Hossain, Mohamed Amjed and Islam, Mir Sujaul (2015) Spatial Distribution and Source Apportionment of Heavy Metals in Soils of Gebeng Industrial City, Malaysia. Environmental Earth Sciences, 73 (1). pp. 115-126. ISSN 1866-6299. (Published)

Nasly, Mohamed Ali and Hossain, Mohamed Amjed and Islam, Mir Sujaul (2013) Water Quality Index: an Indicator of Surface Water Pollution in Eastern part of Peninsular Malaysia. Research Journal of Recent Sciences, 2 (10). pp. 10-17. ISSN 2277-2502. (Published)

Nasly, Mohamed Ali and Hossain, Mohamed Amjed and M. R., Islam and Sobahan, Md Abdus (2013) Effect of Industrial Pollution on the Spatial Variation of Surface Water Quality. American Journal of Environmental Science, 9 (2). pp. 120-129. ISSN 1553-345X. (Published)

Nasrul Azuan, Alang and Nikbin, Kamran M. (2019) A new approach to predict creep rupture of Grade 92 steel under multiaxial stress states. International Journal of Mechanical Sciences, 163. pp. 1-2. ISSN 0020-7403. (Published)

Nasrul Hadi, Johari and Hamady, Mohamad S. and Xu, Xiaoyun (2022) Fluid-structure interaction study of the effect of stent on local hemodynamics parameters at the stented carotid artery bifurcation. Journal of Advanced Research in Applied Sciences and Engineering Technology, 28 (2). pp. 247-255. ISSN 2462-1943. (Published)

Nasrullah, M. and Singh, Lakhveer and Krishnan, Syam G. and Mimi Sakinah, A. M. and Mahapatra, Durga Madhab and Zularisam, A. W. (2020) Electrocoagulation treatment of raw palm oil mill effluent: Effect o foperating parameters on floc growth and structure. Journal of Water Process Engineering, 33 (101114). pp. 1-11. ISSN 2214-7144. (Published)

Nasrullah, Mohd Zulkiflee and Mimi Sakinah, A. M. and Abdul Syukor, Abd Razak and Anwar, Ahmad and Zahrizan, Zakaria and Zularisam, A. W. and Ideris, Zakaria (2011) Hydrogen as the Future Sustainable Energy – A Review. International Journal of Civil Engineering and Geo-Environmental, 2. pp. 47-57. ISSN 2180-2742. (Published)

Nazatul Shiema, Moh Nazar and Noor Syazwani, Mansor and Umar, Khayam and Nor Asiah, Muhamad and Mariatti, Jaafar Mustapha and Amir Izzani, Mohamed and Mohamad Kamarol, Mohd Jamil (2022) Effect of silica nanofiller in cross-linked polyethylene as electrical tree growth inhibitor. International Journal of Electrical and Computer Engineering, 12 (3). pp. 2256-2263. ISSN 2088-8708. (Published)

Nazira, Mahmud and Rosentrater, Kurt A. (2019) Life-cycle assessment (LCA) of different pretreatment and product separation technologies for butanol bioprocessing from oil palm frond. Energies, 13 (1). pp. 1-21. ISSN 1996-1073. (Published)

Nelfiyanti, Nelfiyanti and Nik Mohd Zuki, Nik Mohamad and MFF, Ab. Rashid and Anwar Ilmar, Ramadhan (2022) Parameters of effects in decision making of automotive assembly line using the Analytical Hierarchy Process method. CIRP Journal of Manufacturing Science and Technology, 37. pp. 370-377. ISSN 1755-5817. (Published)

Newaz, K.K. and Pal, S.K. and Hossain, S. and Karim, A. (2021) Evaluation of heavy metal pollution risk associated with road sediment. Environmental Engineering Research, 26 (3). pp. 1-9. ISSN 1226-1025. (Published)

Ng, Cui Ming and Anis, A. and Putra Jaya, Ramadhansyah and Liew, Nicole Siaw Ing (2023) Analysis of reclaimed asphalt pavement with rejuvenating materials. Construction, 3 (1). pp. 75-86. ISSN 2785-8731. (Published)

Ng, Cui Ming and Liew, Nicole Siaw Ing and K. A., Masri and Putra Jaya, Ramadhansyah and Zaid Hazim, Al-Saffar and Muhammad Naqiuddin, Mohd Warid and Norhidayah, Abdul Hassan (2022) Performance of asphaltic concrete incorporating fly ash under low temperature. Key Engineering Materials, 912. pp. 153-169. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Ng, Cui Ming and Liew, Nicole Siaw Ing and Nur Ailah Taklima, Zukri and Putra Jaya, Ramadhansyah and Haryati, Awang (2023) The effect of mineral bottle as fine aggregate for manufacturing sustainable road construction. Construction, 3 (1). pp. 54-62. ISSN 2785-8731. (Published)

Ng, Cui Ming and Putra Jaya, Ramadhansyah and Awang, Haryati and Liew, Nicole Siaw Ing and Mohd Hasan, Mohd Rosli and Al-Saffar, Zaid Hazim (2022) Performance of glass powder as bitumen modifier in hot mix asphalt. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103263). pp. 1-13. ISSN 1474-7065. (Published)

Ng, Jun Shen and Muzamir, Hasan and Low, Yong Ler (2024) Influence of Crushed Brick Columns on Geotechnical Properties of Expansive Soil. Jurnal Teknologi (Sciences and Engineering), 86 (4). pp. 95-104. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Ng, Jun Shen and Muzamir, Hasan and Nur Amina Azmyra, Hashim (2023) The Influence of Bottom Ash Column in the Geotechnical Properties Enhancement of Soft Clay Soil. International Journal for Multidisciplinary Research (IJFMR), 5 (5). pp. 1-13. ISSN 2582-2160. (Published)

Ngien, S. K. and Chin, Pei Qi and Muzamir, Hasan and Mohamad Idris, Ali and Mohd Yuhyi, Mohd Tadza and Norhaniza, Abd. Rahman (2016) Image Analysis of Non-Aqueous Phase Liquid Migration in Aggregated Kaolin. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6393-6398. ISSN 1819-6608. (Published)

Ngien, S. K. and Hiew, Thong Yap (2017) Flow Design of Sewerage System - A Case Study in Taman Pandan Damai, Kuantan. Indian Journal of Science and Technology, 10 (2). pp. 1-4. ISSN (Print) : 0974-6846, (Online) : 0974-5645. (Published)

Ngien, S. K. and Pian, Ng Sook (2013) An Evaluation of the Design Criterion For Sewerage Peak Flow Factor At Segi University Hostel. SEGi Review, 6. pp. 65-71. ISSN 1985-5672. (Published)

Ngien, S. K. and R., Sa'ari and N. A., Rahman and H. N., Abdul Latif and Z. M., Yusof and S. A., Kamaruddin and M., Mustaffar and M. A., Hezmi (2015) Application of Digital Image Processing Technique in Monitoring LNAPL Migration in Double Porosity Soil Column. Jurnal Teknologi (Sciences and Engineering), 72 (3). pp. 23-29. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Ngien, S. K. and Shahidi, A. F. M. and Doh, S. I. and Chin, Siew Choo and Gisen, J. I. A. and Chua, M. (2022) Water quality improvement features of aquaponic systems and their economic feasibility. Construction, 2 (2). pp. 39-47. ISSN 2785-8731. (Published)

Ngouangna, Eugene Ngwana and Mohd Zaidi, Jaafar and Mohammadnoorul Noorul Anam, Mohd Norddin and Agi, Augustine Aja and Abdul Rahim, Risal and Chinedu Mamah, Stanley Chinedu and Oseh, Jeffrey Onuoma (2022) The effect of hydroxyapatite nanoparticles on wettability and brine-oil interfacial tension as enhance oil recovery mechanisms. Journal of Petroleum Science and Engineering, 218 (110941). pp. 1-13. ISSN 0920-4105. (Published)

Nithyadharseni, P. and Abhilash, K. P. and Petnikota, Shaikshavali and Anilkumar, M.R. and Rajan, Jose and Ozoemena, K.I. and Vijayaraghavan, R. and Kulkarni, Pranav and Balakrishna, Geetha and Chowdari, B. V. R. and Adams, Stefan and Reddy, M. V. (2017) Synthesis and Lithium Storage Properties of Zn, Co and Mg doped SnO2 Nano Materials. Electrochimica Acta, 247. pp. 358-370. ISSN 0013-4686. (Published)

Noor Asma Fazli, Abdul Samad and Suriyati, Saleh and Muhammad Bilal, Muslim (2017) Effects of Purification on the Hydrogen Production in Biomass Gasification Process. Chemical Engineering Transactions, 56. pp. 1495-1500. ISSN 2283-9216. (Published)

Noor Athirah, Dzulkefli and Norazwina, Zainol (2018) Data on modeling mycelium growth in pleurotus sp. cultivation by using agricultural wastes via two level factorial analysis. Data in Brief, 20. pp. 1710-1720. ISSN 2352-3409. (Published)

Noor Farhana, Mohd Zuki and Ahmad Firdaus, Zainal Abidin and Mohd Faaizie, Darmawan and Mohd Faizal, Ab Razak (2023) Evaluation of boruta algorithm in DDoS detection. Egyptian Informatics Journal, 24 (1). pp. 27-42. ISSN 1110-8665. (Published)

Noor Fitrah, Abu Bakar and Mohd Aizuddin, Salihfudin and Nur Hidayati, Hidayati Othman and Fatmawati, Adam and M. Nazli Nazli, Naim and Nur Hashimah, Alias and Norazah Abd A., Abd Rahman (2023) Optimization of electrospinning parameters for producing carrageenan-PVA based nanofibers film. Journal of Fiber Science and Technology, 79 (3). pp. 57-71. ISSN 0037-9875. (Published)

Noor Jannah, Zakaria and Mohd Ibrahim, Shapiai and Rasli, Abd Ghani and Mohd Najib, Mohd Yassin and Mohd Zamri, Ibrahim and Nurbaiti, Wahid (2023) Lane detection in autonomous vehicles : A systematic review. IEEE Access, 11. pp. 3729-3765. ISSN 2169-3536. (Published)

Noor Ropidah, Bujal and Aida Fazliana, Abdul Kadir and Marizan, Sulaiman and Sulastri, Abdul Manap and Mohamad Fani, Sulaima (2022) Firefly analytical hierarchy algorithm for optimal allocation and sizing of DG in distribution network. International Journal of Power Electronics and Drive Systems, 13 (3). pp. 1419-1429. ISSN 2088-8694. (Published)

Noor Sheena Herayani, Harith and Viliana, Jainih and Mohd Azizul, Ladin and M. I., Adiyanto (2021) Assessing the vulnerability of Kota Kinabalu buildings. Civil Engineering and Architecture, 9 (5). pp. 1-10. ISSN 2332-1091. (Published)

Noor Suraya, Romali and Fatin Afiqah, Ardzu and Muhamad Nurfaizal, Suzany (2023) The potential of coconut waste as green roof materials to improve stormwater runoff. Water Science and Technology, 87 (6). pp. 1515-1528. ISSN 0273-1223. (Published)

Noor Suraya, Romali and Muhammad @ S A Khushren, Sulaiman and Zulkifli, Yusop and Zulhilmi, Ismail (2018) Flood risk assessment: a review of flood damage estimation model for Malaysia. Jurnal Teknologi (Sciences and Engineering), 80 (3). pp. 145-153. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Noor Suraya, Romali and Nadiah, Mokhtar (2011) Application of Biofilter System for Domestic Wastewater Treatment. International Journal of Civil Engineering and Geo-Environmental, 2. pp. 13-18. ISSN 2180-2742. (Published)

Noor Suraya, Romali and Zulkifli, Yusop (2021) Flood damage and risk assessment for urban area in Malaysia. Hydrology Research, 52 (1). 142 -159. ISSN 1998-9563. (Published)

Noor Suraya, Romali and Zulkifli, Yusop and Ahmad Zuhdi, Ismail (2018) Application of HEC-RAS and Arc GIS for floodplain mapping in Segamat town, Malaysia. International Journal of GEOMATE, 14 (43). pp. 125-131. ISSN 2186-2982 (print); 2186-2990(online). (Published)

Noor Suraya, Romali and Zulkifli, Yusop and Nur Izyan Hani, Mohd Zaki and Muhammad @ S A Khushren, Sulaiman and Nadiatul Adilah, Ahmad Abdul Ghani and Suryati, Sulaiman (2019) Flood damage function model for residential area in Kuantan: a preliminary study. International Journal of Integrated Engineering, 11 (2). pp. 203-213. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Noor Syahirah, Nordin and Mohd Arfian, Ismail (2023) A hybridization of butterfly optimization algorithm and harmony search for fuzzy modelling in phishing attack detection. Neural Computing and Applications, 35 (7). pp. 5501-5512. ISSN 0941-0643. (Published)

Noor Yahida, Yahya and Chan, J. X. and N., Ngadi (2021) Biosorption of chromium (VI) ions using sustainable eggshell impregnated pandanus amaryllifolius roxb. biosorbent. Evergreen, 8 (1). pp. 146-155. ISSN 2189-0420. (Published)

Noor Zaihah, Jamal and Mohd Herwan, Sulaiman and Abdul, Nasir and Jabbar, Waheb A. (2024) Optimal overcurrent relay solutions for protection coordination using metaheuristics approaches with penalty function method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 49 (1). pp. 245-271. ISSN 2462-1943. (Published)

Noor Zirwatul Ahlam, Naharuddin and M. H., Abu Bakar and N., Tamchek and Alresheedi, Mohammed Thamer and Abas, A. F. and Goh, Cheeseong and Nurul Hida, Zainuddin and Mohd Adzir, Mahdi (2023) Effect of gold-nanoparticle size on microfiber saturable absorber for mode-locked erbium-doped fiber lasers. Optik, 276 (170631). pp. 1-16. ISSN 0030-4026. (Published)

Noorfatin Farhanie, Mohd Fauzi and Nur Nabihah Rusyda, Roslan and Mohd Ikhwan, Muhammad Ridzuan (2023) Reliability performance of distribution network by various probability distribution functions. International Journal of Electrical and Computer Engineering, 13 (2). pp. 2316-2325. ISSN 2088-8708. (Published)

Noorli, Ismail and Norhafizah, Salleh and Noor Faezah, Mohd Yusof and Zalipah, Jamellodin and Mohd Faizal, Md Jaafar (2017) Strength, Water Absorption And Thermal Comfort Of Mortar Bricks Containing Crushed Ceramic Waste. Jurnal Teknologi (Sciences and Engineering), 79 (7). pp. 167-173. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Noorul Hudai, Abdullah and Xian, Ong Jing and Yi, Chiew Zhi and Yuan, Ng Shi and Mohamad Syahrul Syazwan, Yaacob and Nur Atikah, Abdul Salim and Noraziah, Ahmad and Zainab, Mat Lazim and Maria, Nuid and Faizuan, Abdullah (2023) Removal of phosphate from synthetic wastewater by using marsh clam (polymesoda expansa) shell as an adsorbent. Biointerface Research in Applied Chemistry, 13 (56). pp. 1-12. ISSN 2069-5837. (Published)

Nor Amirah Safiah, Muhammad and Mohd Amirul Hilmi, Mohd Hanoin and Nadzirah, Mohd Mokhtar and Lau, W. J. and Juhana, Jaafar (2022) Industrial application of membrane distillation technology using palm oil mill effluent in Malaysia. Materials Today: Proceedings. pp. 1282-1287. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Nor Ashikin, Nur Atiqah Lyana and Siti Fatimah Zaharah, Mohd Fuzi and Shoriya Aruni, Abdul Manaf and Nor Hasmaliana, Abdul Manas and Shalyda, Md Shaarani @ Md Nawi and RosliMd, Illias (2022) Optimization and characterization of immobilized e. coli for engineered thermostable xylanase excretion and cell viability. Arabian Journal of Chemistry, 15 (6). pp. 1-11. ISSN 1878-5352. (Published)

Nor Azlina, Alias and Thamer Ahmed, Mohamed and Abdul Halim, Ghazali and Megat Johari, Megat Mohd. Noor (2008) Impact of Takeoff Angle of Bucket Type Energy Dissipater on Scour Hole. American Journal of Applied Sciences, 5 (2). pp. 117-121. ISSN 1546-9239 (print), 1554-3641 (online). (Published)

Nor Azwani, Mohd Shukri and Noraishah, Mohamed Nor and Norashikin, Mustafa and A. F., Azizan and Muhamad Ashraf, Rostam and M. S., Abu Seman and A. H., Mohd Ramadan and Rahiwan Nazar, Romli (2023) A systematic review of maternal dietary intake and its association with childhood stunting. IIUM Medical Journal Malaysia, 22 (1). pp. 8-15. ISSN 2735-2285. (Published)

Nor Bakiah, Abd Warif and Mohd Yamani Idna, Idris and Ainuddin, Wahid Abdul Wahab and Nor Syahidatul Nadiah, Ismail and Rosli, Salleh (2022) A comprehensive evaluation procedure for copy-move forgery detection methods : Results from a systematic review. Multimedia Tools and Applications, 81 (11). pp. 15171-15203. ISSN 1380-7501. (Published)

Nor Hafizah, Moslim and Yong Zulina, Zubairi and Abdul Ghapor, Hussin and Siti Fatimah, Hassan and Nurkhairany Amyra, Mokhtar (2019) A comparison of asymptotic and bootstrapping approach in constructing confidence interval of the concentration parameter in von mises distribution. Sains Malaysiana, 48 (5). pp. 1151-1156. ISSN 0126-6039. (Published)

Nor Hanuni, Ramli and Nur Eliza, Badrul Hisham and Nor Fhairna, Baharulrazi (2023) The effectiveness of rice husk ash as additive in palm oil-based compost in enhancing the nitrogen uptake by brassica oleracea var. alboglabra L. (Chinese Kale) plant. Pertanika Journal of Tropical Agricultural Science, 46 (1). pp. 315-328. ISSN 1511-3701 (Print); 2231-8542 (Online). (Published)

Nor Hasanah, Abdul Shukor Lim and Farah Hanum, Shaari and Eliza Hanum, Shaari and Abdul Rahman, Mohd Sam and Nur Hafizah, Abd Khalid and Nur Farhayu, Ariffin and Khairunisa, Muthusamy (2020) Properties of concrete containing bamboo waste as cement replacement. Journal of Computational and Theoretical Nanoscience, 17 (2-3). pp. 1306-1310. ISSN 1546-1955 (Print); ISSN 1546-1963 (Online). (Presented)

Nor Hasanah, Abdul Shukor Lim and Noor Fazura Najihah, Alladin and Mohammadhosseini, Hosein and Nur Farhayu, Ariffin and Ain Naadia, Mazlan (2020) Properties of mortar incorporating spent garnet as fine aggregates replacement. International Journal of Integrated Engineering, 12 (9). pp. 96-102. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Nor Hasanah, Abdul Shukor Lim and Nur Farhayu, Ariffin and Abdul Rahman, Mohd. Sam and Shafaghat, Arezou and Keyvanfar, Ali (2017) Effect of Recycled Homogeneous Ceramic Waste Aggregates on Water Absorption of Mortar. Journal of Environmental Treatment Techniques , 5 (1). pp. 34-37. ISSN 2309-1185. (Published)

Nor Hayati, Hamid and M. I., Adiyanto and M, Mohamad (2017) Seismic Performance of Single Bay Two Storey RC Frame under In-Plane Lateral Cyclic Loading. Journal of Engineering and Applied Sciences, 12 (22). pp. 6502-6510. ISSN 1819-6608. (Published)

Nor Helmie Shahreen, Mohd Ali and Lee, Yong Siang and Ahmad Rizal, Alias and Rahimi, A. Rahman (2024) Integration of circular economy into design and construction of infrastructure projects in Malaysia: Barriers and countermeasures. Journal of the Malaysian Institute of Planners, 22 (3). pp. 118-135. ISSN 1675-6215. (Published)

Nor Khonisah, Daud (2023) CO2 adsorption performance of AC and Zn-MOF for the use of carbon capture and sequestration (CCS). Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Nor Maniha, Abdul Ghani and Lim, Wei Jie and Hoh, Wei Siang and Salmah Anim, Abu Hassan (2024) Rehabilitation and home health monitoring Based-AI scheduling application for coronary artery disease and cardiovascular patients. Instrumentation Mesure Metrologie, 23 (2). pp. 161-173. ISSN 1631-4670. (Published)

Nor Sarahtul Nadirah, Hairol Nizan and Farah Hanani, Zulkifli (2020) Reinforcement of hydroxyethyl cellulose / poly (vinyl alcohol) with cellulose nanocrystal as a bone tissue engineering scaffold. Journal of Polymer Research, 27 (6). pp. 1-9. ISSN 1022-9760. (Published)

Nor Shafiqah, Mohd Nasir and Jiao, Yilai and Van Cuong, Nguyen and Sumaiya, Zainal Abidin (2024) Promoted Ni–Co bimetallic catalysts for glycerol dry reforming : Understanding the physiochemical properties and carbon formation. International Journal of Hydrogen Energy, 56. pp. 651-666. ISSN 0360-3199. (Published)

Nor Shafiqah, Mohd Nasir and Mohamed, Hassan and Panpranot, Joongjai and Sumaiya Zainal, Zainal Abidin (2024) Catalytic evaluation of Pd-promoted Ni-Co/Al2O3 catalyst for glycerol dry reforming: Assessing hydrogen-rich syngas production, kinetics and mechanisms. Chemical Engineering Science, 285 (119567). pp. 1-16. ISSN 0009-2509. (Published)

Nor Shuhada, Ibrahim and Nafrizuan, Mat Yahya and Saiful Bahri, Mohamed (2022) Metaheuristic nature-inspired algorithms for reservoir optimization operation: A systematic literature review. Indonesian Journal of Electrical Engineering and Computer Science, 26 (2). pp. 1050-1059. ISSN 2502-4752. (Published)

Noram Irwan, Ramli and Ramesh, Yanalagaran (2018) Assessment of coastal erosion related to wind characteristics in peninsular Malaysia. Journal of Engineering Science and Technology, 13 (11). pp. 3677-3690. ISSN 1823-4690. (Published)

Norashima, Abdullah and Ayodele, Bamidele Victor and Wan Nurdiyana, Wan Mansor and Sureena, Abdullah (2018) Effect of incorporating TiO2 photocatalyst in PVDF hollow fibre membrane for photo-assisted degradation of methylene blue. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (3). pp. 588-591. ISSN 1978-2993. (Published)

Norasyimah, Ahmad @ Mohd Din and Khairunisa, Muthusamy and Rahimah, Embong and Krishnaraj, L. (2024) Recycling of oil palm shell as aggregate in concrete: A review. Construction, 4 (1). pp. 28-36. ISSN 2785-8731. (Published)

Noraziah, Ahmad and Roslina, Mohd Sidek and Mohd Affendy, Omardin (2014) E-Appointment Scheduling (EAS). World Academy of Science, Engineering and Technology, 4 (2). pp. 599-603. ISSN 2010-376x; 2010-3778 (electronic). (Published)

Norazlina, Hashim and Rabiatul Manisah, Mohamed and Hajaratul Najwa, Mohamed and Kamal, Yusoh (2024) Poly(lactic acid)/graphene oxide nanocomposites: A morphology study and mechanism of reaction. Journal of Advanced Research in Applied Sciences and Engineering Technology, 33 (3). pp. 384-392. ISSN 2462-1943. (Published)

Norazwina, Zainol and Amirah, Ya’acob and Putri Nurul Yasmin, Mohd Ridza and Siti Hatijah, Mortan and Kamaliah, Abdul Samad (2022) Evaluation of factors affecting microbial growth inhibition and optimization using pineapple leaves juice. Pertanika Journal of Science and Technology, 30 (3). pp. 2097-2113. ISSN 0128-7680. (Published)

Norazwina, Zainol and Nor Hazwani, Aziz and Nur Husnina, Mohamed Nor Rahim (2023) Kinetic modelling for COD and nitrate- N removal from hatchery wastewater through biological approach. Applied Chemical Engineering, 6 (2259). pp. 1-11. ISSN 2578-2010. (Published)

Norbaizurah, Rahman and Amalina Hanani, Ismail and Kusbiantoro, Andri (2019) Effect of Dipotassium Hydrogen Phosphate and Calcium Nitrate on Strength and Microstructural Properties of Geopolymer Mortar. Key Engineering Materials. ISSN 1013-9826 (print); 1662-9795 (online). (In Press / Online First) (In Press / Online First)

Norbaizurah, Rahman and Andri, Kusbiantoro and Nabilah, Mamat and Khairunisa, Muthusamy and Mohd Mustafa Al Bakri, Abdullah (2018) Roles of calcium in geopolymer containing paper mill sludge ash. Materials Science Forum, 917. pp. 311-315. ISSN 0255-5476. (Published)

Norfazilah, Abdul Halim and Nor Zalina, Kasim and Aliff Radzuan, Mohamad Radzi and Faiz, Mohd Turan (2021) A systematic literature review of multi-criteria analysis model methods on sustainability weighting for ethanol plant. ASM Science Journal, 16. pp. 1-13. ISSN 1823-6782. (Published)

Norhaida, Ab Razak and Davies, Catrin Mair (2022) Numerical simulation of creep notched bar of P91 steel. Frattura ed Integrit� Strutturale, 16 (62). pp. 261-270. ISSN 1971-8993. (Published)

Norhaiza, Ghazali and Khairunisa, Muthusamy and Saffuan, Wan Ahmad (2019) Utilization of fly ash in construction. IOP Conference Series: Materials Science and Engineering, 601 (012023). pp. 1-8. (Published)

Norhaiza, Nordin and Wan Hamidon, Wan Badaruzzaman and Nasly, Mohamed Ali and Wan Mansor, Wan Muhammad and Khairunisa, Muthusamy (2011) Bending Behaviour of Semi Continuous Prefabricated Profiled Steel Sheeting Dry Board (PSSDB) Floor Panels. International Journal of Civil Engineering and Geo-Environmental, 2. pp. 1-6. ISSN 2180-2742. (Published)

Norida, Ridzuan and Lim, Zhen Hao and Hikmat, Said Al-Salim (2019) A review of the mechanism and role of wax inhibitors in the wax deposition and precipitation. Pertanika Journal of Science and Technology, 21 (1). pp. 499-526. ISSN 0128-7680. (Published)

Norlida, Mohd Dom and Sharina, Sulaiman and Norashikin, Ahmad Kamal and Saerahany Legori, Ibrahim and Nadiatul Adilah, Ahmad Abdul Ghani and Junaidah, Ariffin (2016) Sediment load analysis in Lake Chini. The Journal of Water Resources Management (JoWRM), 1 (5). pp. 46-57. ISSN 2289-1080. (Published)

Norlin, Pauzi and Segaran, Sivenesh Chandra and Shahril, Mohamad and Saidatul Shima, Jamari (2023) Silver nitrate concentration on silver nanoparticles formation attached on cellulose nanocrystal matrix. Materials Today: Proceedings. pp. 1-4. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Nornasuha, Abdullah and Nurul Aini, Razali and Herma Dina, Setiabudi and Abdul Rahman, Mohamed and Aishah, Abdul Jalil (2024) Enhanced hydrogen generation from biodiesel-waste glycerol using Ni/SBA-15 catalyst synthesized from boiler ash. International Journal of Hydrogen Energy, 53. pp. 1052-1064. ISSN 0360-3199. (Published)

Noroozi, Siamak and A. G. A., Rahman and Eng, H. C. and Dupac, M. and Ong, Zhi Chao and Khoo, Shin Yee and Kong, K. K. (2019) A novel investigation into the application of non-destructive evaluation for vibration assessment and analysis of in-service pipes. Nondestructive Testing and Evaluation, 34 (4). pp. 413-428. ISSN 1058-9759. (Published)

Norshafira Syazwani, Abu Hasan and Shahril, Mohamad and Sharifah Fathiyah, Sy Mohamad and Mohd Hafiz, Arzmi and Nurul Nadia Izzati, Supian (2023) Ex-situ development and characterization of composite film based on bacterial cellulose derived from oil palm frond juice and chitosan as food packaging. Pertanika Journal of Science and Technology, 31 (3). pp. 1173-1187. ISSN 0128-7680. (Published)

Norsharimie, Mat Adam and Addie, Irawan and Mohd Ashraf, Ahmad (2022) Robust super-twisting sliding mode controller for the lateral and longitudinal dynamics of rack steering vehicle. Bulletin of Electrical Engineering and Informatics, 11 (4). pp. 1882-1891. ISSN 2089-3191. (Published)

Norsyahidatul Farah, Nanyan and Mohd Ashraf, Ahmad and Hekimoğlu, Baran (2024) Optimal PID controller for the DC-DC buck converter using the improved sine cosine algorithm. Results in Control and Optimization, 14 (100352). pp. 1-19. ISSN 2666-7207. (Published)

Norul Wahida, Kamaruzaman and Khairunisa, Muthusamy (2012) Effect of Curing Regime on Compressive Strength of Concrete Containing Malaysian Laterite Aggregate. Advanced Materials Research, 626. pp. 839-843. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Norul Wahida, Kamaruzaman and Khairunisa, Muthusamy (2012) Engineering Properties of Concrete with Laterite Aggregate as Partial Coarse Aggregate Replacement. International Journal of Civil Engineering and Geo-Environmental, 3 (1). pp. 47-50. ISSN 2180-2742. (Published)

Nour, Abdurahman Hamid and Modather, Rayan Hassan and Rosli, Mohd Yunus and Mohammed Elnour, Ahmed Adam Hassan and Nurul Ain, Ismail (2024) Characterization of bioactive compounds in patchouli oil using microwave-assisted and traditional hydrodistillation methods. Industrial Crops and Products, 208 (117901). pp. 1-17. ISSN 0926-6690. (Published)

Nour, Azhari H. and Idris, Abeer A. and Ishag, Omer A. and Nour, Abdurahman H. and Alara, Oluwaseun Ruth (2022) Chemical constituents and cockroach repellent activity of Sudanese Cyperus rotundus rhizomes essential oil. Journal of Research in Pharmacy, 26 (4). pp. 920-930. ISSN 2630-6344. (Published)

Nugroho, Sri and Fitriyana, Deni Fajar and Ismail, Rifky and Nurcholis, Thesar Aditya and Cionita, Tezara and Siregar, Januar Parlaungan (2022) The effect of surface hardening on the HQ 705 steel camshaft using static induction hardening and tempering method. Automotive Experiences, 5 (3). pp. 343-354. ISSN 2615-6202. (Published)

Nuhu Ahmad, Abdul hafiz and Anis Farihan, Mat Raffei and Mohd Faizal, Ab Razak and Ahmad Syafadhli, Abu Bakar (2024) Distributed denial of service attack Detection in IoT networks using deep learning and feature fusion : A review. Mesopotamian Journal of CyberSecurity, 4 (1). pp. 47-70. ISSN 2958-6542. (Published)

Nur Adillah, Abdul Razak and Sorooshian, Shahryar (2015) Case Improvement based on Lower Quality Mode and Effects Analysis. Journal of Advanced & Applied Sciences (JAAS), 3 (3). pp. 145-151. ISSN 2289-6260. (Published)

Nur Afrina Miza, Aziz Nasatioun and Mohammad Adam, Adman and Norsaffarina, Aziz and Syarifuddin, Misbari (2023) Distribution Mapping Of House Type, House Age And Sick Building Syndrome Among Work-From-Home Workers By Using A GIS-based Approach. MAEH Journal of Environmental Health, 5 (1). pp. 16-18. ISSN 2637-1359. (Published)

Nur Amanina, Hassanuddin and Erna, Normaya and Hakimah, Ismail and Anwar, Iqbal and Mohd Bijarimi, Mat Piah and Shafida, Abd Hamid and Mohammad Norazmi, Ahmad (2024) Methyl 4-pyridyl ketone thiosemicarbazone (4-PT) as an effective and safe inhibitor of mushroom tyrosinase and antibrowning agent. International Journal of Biological Macromolecules, 255 (128229). pp. 1-16. ISSN 0141-8130. (Published)

Nur Amirah, Othman and Mohd Aminudin, Jamlos and Wan Azani, Wan Mustafa and Mohd Faizal, Jamlos and Mohamad Nur Khairul Hafizi, Rohani and Syahrul Affandi, Saidi and Hidayath, Mirza (2023) Zero-biasing split ring resonator using metamaterial element for high gain superstrates ultra-wideband antenna. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 321-330. ISSN 2462-1943. (Published)

Nur Athira, Jamaluddin and Norfazillah, Talib and Amiril Sahab, Abdul Sani (2020) Tribological Analyses of Modified Jatropha Oil with hBN and Graphene Nanoparticles as An Alternative Lubricant for Machining Process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 76 (2). pp. 1-10. ISSN 2289-7879. (Published)

Nur Azhani, Abd Razak and Asnul Hadi, Ahmad and Mohd Maarof, Rashidi and Naher, Sumsun (2021) An investigation of semisolid Al7075 feedstock billet produced by a gas-assisted direct thermal method. The International Journal of Advanced Manufacturing Technology (114). pp. 1233-1240. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Nur Azhani, Abd Razak and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2020) Thermal profile and microstructure of wrought aluminium 7075 for semisolid metal processing. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 7842 -7850. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Nur Azzyyati, Azman and Siti Fatimah Zaharah, Mohamad Fuzi and Nor Hasmaliana, Abdul Manas and Nur Izyan, Wan Azelee and Nasratun, Masngut (2024) Improved heterocyclic aromatic hydrocarbon compound adsorption using functionalised rice husk biochar. Bioresource Technology Reports, 25 (101704). pp. 1-9. ISSN 2589-014X. (Published)

Nur Farah Aziera, Jamaludin and Khairunisa, Muthusamy and Mohamad Shahirudin, Mohd Nasir and Hilal, N. N. (2023) Enhancing mortar properties with crushed palm oil clinker as a partial fine aggregate replacement. Construction, 3 (2). 293 -299. ISSN 2785-8731. (Published)

Nur Farah Aziera, Jamaludin and Khairunisa, Muthusamy and Mohd Faizal, Md Jaafar and Fadzil, Mat Yahaya (2021) Use of palm oil clinker in concrete research: a review. Construction, 1 (1). pp. 35-43. ISSN 2785-8731. (Published)

Nur Farah Aziera, Jamaludin and Khairunisa, Muthusamy and Mohd Faizal, Md Jaafar and Putra Jaya, Ramadhansyah and Mohamed A., Ismail (2022) Performance of palm oil clinker lightweight aggregate concrete comprising spent garnet as fine aggregate replacement. Advanced In Civil Engineering, 2022 (9674096). pp. 1-13. ISSN 1687-8094 (Online). (Published)

Nur Farahaina, Idris and Mohd Arfian, Ismail and Mohd Saberi, Mohamad and Shahreen, Kasim and Zalmiyah, Zakaria and Sutikno, Tole (2022) Breast cancer disease classification using fuzzy-ID3 algorithm based on association function. IAES International Journal of Artificial Intelligence, 11 (2). pp. 448-461. ISSN 2089-4872. (Published)

Nur Farhayu, Ariffin and Nurul Natasha, Nasrudin and Aizat, Alias and Nor Hasanah, Abdul Shukor Lim and Abdul Muiz, Hasim and Muhammad Nor Syahrul, Zaimi (2024) Thermal waste replacement as a sustainable approach to reinforced concrete beam design: A finite element study. The Open Civil Engineering Journal, 18. pp. 1-23. ISSN 1874-1495. (Published)

Nur Farhayu, Ariffin and Saidah Annisaa, Salam and Adib Danial, Kamaruddin (2019) The effect on unfavourable economic conditions in Malaysia to abandoned housing project. International Journal of Recent Technology and Engineering, 8 (3S3). pp. 423-428. ISSN 2277-3878. (Published)

Nur Farhayu, Ariffin and Saidah Annisaa, Salam and Adib Danial, Kamaruddin The effect on unfavourable economic conditions in Malaysia to abandoned housing project. International Journal of Recent Technology and Engineering. ISSN 2277-3878. (Published)

Nur Farhayu, Ariffin and Saidah An’nisaa, Salam and Mohamad Idris, Ali and Noram Irwan, Ramli and Omar, Jamaludin (2024) Prioritizing solutions to mitigate abandoned housing projects: Insights from AHP analysis in Malaysia. The Open Civil Engineering Journal, 18 (e18741495286239). pp. 1-11. ISSN 1874-1495. (Published)

Nur Farisya, Shamsudin and Ahmed, Qamar Uddin and Syed, Mahmood and Syed Adnan Ali, Shah and Murni Nazira, Sarian and Muhammad Muzaffar, Ali Khan Khattak and Alfi, Khatib and Awis Sukarni Mohmad, Sabere and Yusnaini, Md Yusoff and Jalifah, Latip (2022) Flavonoids as antidiabetic and anti-inflammatory agents: A review on structural activity relationship-based studies and meta-analysis. International Journal of Molecular Sciences, 23 (12605). pp. 1-35. ISSN 1661-6596. (Published)

Nur Fathin Syuhada, Hazman and Muhammad Syafiq, Mat Zaki and Asmida, Ideris (2023) Carbon catalyst from palm kernel shell (PKS) for methane cracking : Effect of preparation. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Nur Fatihah, Azmi and Luthffi Idzhar, Ismail and Roshahliza, M. Ramli and Mushthofa, Mushthofa and Kusuma Dewi Hardhienata55369740600, Medria Kusuma Dewi (2025) Visualizing anthocyanins : Colorimertic analysis of blue maize. Journal of Advanced Research in Applied Sciences and Engineering Technology, 46 (1). pp. 201-217. ISSN 2462-1943. (Published)

Nur Fatihah, Mohd Roslan and Ahmmad Shukrie, Md Yudin and Muhammad Afiq, Sumono and Muhammad Faris, Mohamad Pozi and Muhammad Aidil Safuan, Othaman (2022) Drying performance of piper nigrum in a swirling fluidized bed dryer: An experimental study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (1). pp. 148-166. ISSN 2289-7879. (Published)

Nur Hafizah, A Khalid and Abdul Rahman, Mohd Sam and Azman, Mohamed and Nor Hasanah, Abdul Shukor Lim and Nur Farhayu, Ariffin (2019) Properties of polymer concrete containing active micro filler of palm oil fuel ash. IOP Conference Series: Materials Science and Engineering, 620 (1). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Nur Hamizah, H. and Abdul Syukor, Abd Razak and Suryati, Sulaiman (2015) Performance of Typha Angustifolia and Lepironia Articulata for Refurbishment Domestic Wastewater in an Integrated Phytogreen System. International Journal of Innovative Science, Engineering & Technology, 2 (12). pp. 1-6. ISSN 2348-7968. (Published)

Nur Hazirah, Rozali Annuar and Alexzman, Zulaikha A. and Ahmad Rafizan, Mohamad Daud and A. F.N., Alias and Haryana, Mohd Hairi and Herma Dina, Dina Setiabudi (2022) A review on hydrogenolysis of sorbitol over heterogeneous catalysts. Journal of Environmental Chemical Engineering, 10 (107229). pp. 1-17. ISSN 2213-3437. (Published)

Nur Hazreen, Mohd Hasni and Akmal Asyraf, Mior Azalian and Tuty Asmawaty, Abdul Kadir and Mohd Azrul Hisham, Mohd Adib (2023) Serious “human papillomavirus vaccine” game for Malaysian adolescents : Development and preliminary study. International Journal of Public Health Science, 12 (1). pp. 82-90. ISSN 2252-8806. (Published)

Nur Hidayah, Mat Yasin and Muhammad Azril, Mohd Yusop and Nur Afiqah Ayuni, Awang Kechik and Amirin Zarif, Zahuri (2023) Composition of fatty acid methyl ester in microalgae Chlorella vulgaris : Comparison between various methods of harvesting, extraction and transesterification. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Nur I. Z., Azman and Nur A. A., Zaini and You K., Yeow and Fahmiruddin, Esa and Rodziah, Nazlan and Mohamad Ashry, Jusoh (2022) Graphene-based material for microstrip bandpass filter. Progress In Electromagnetics Research M, 111. pp. 133-143. ISSN 1937-8726. (Published)

Nur Izyan, Wan Azelee and Mahdi, Hilman Ibnu and Cheng, Yu-Shen and Norhafiza, Nordin and Rosli, Md Illias and Roshanida, Abdul Rahman and Shalyda, Md Shaarani and Bhatt, Pankaj and Yadav, Sudesh and Chang, Soon Woong and Ravindran, Balsubramani and Ashokkumar, Veeramuthu (2023) Biomass degradation : Challenges and strategies in extraction and fractionation of hemicellulose. Fuel, 339 (126982). pp. 1-18. ISSN 0016-2361. (Published)

Nur Kamila, Idris and Nurhaizan, Mohd Zainudin and Rahimi, A. Rahman (2024) Improving film quality using software solutions in photography studios. International Journal of Industrial Management (IJIM), 18 (1). pp. 22-31. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Nur Naajihah, Ab Rahman and Nafrizuan, Mat Yahya and Nurul Umiza, Mohd Sabari (2023) Design of a fuzzy logic proportional integral derivative controller of direct current motor speed control. IAES International Journal of Robotics and Automation, 12 (1). pp. 98-107. ISSN 2089-4856. (Published)

Nur Nabihah Rusyda, Roslan and Noor Fatin Farhanie, Mohd Fauzi and Mohd Ikhwan, Muhammad Ridzuan (2022) Monte Carlo simulation convergences’ percentage and position in future reliability evaluation. International Journal of Electrical and Computer Engineering, 12 (6). pp. 6218-6227. ISSN 2088-8708. (Published)

Nur Nabihah Rusyda, Roslan and Noor Fatin Farhanie, Mohd Fauzi and Mohd Ikhwan, Muhammad Ridzuan (2022) Variance reduction technique in reliability evaluation for distribution system by using sequential Monte Carlo simulation. Bulletin of Electrical Engineering and Informatics, 11 (6). pp. 3061-3068. ISSN 2089-3191. (Published)

Nur Najwa, Khairul Azman and Najihah, Zanian and Syarifah Nur Aqida, Syed Ahmad and Izwan, Ismail and Salwani, Mohd Salleh (2024) Laser texturing of soda lime glass surface for hydrophobic surface in wenzel state. International Journal of Automotive and Mechanical Engineering, 21 (1). pp. 10968-10980. ISSN 2229-8649. (Published)

Nur Shahira, Mat Hussain and Azahani Natasha, Azman and Nurhafizah, Abu Talip Yusof and Nur Alia Athirah, Hj Mohtadzar and Mohamad Shaiful, Abdul Karim (2022) Design of resonator cavity for liquid material characterization. Telkomnika (Telecommunication Computing Electronics and Control), 20 (2). pp. 447-454. ISSN 1693-6930. (Published)

Nur Suhaida, Roslan and Lee, Yong Siang and Noor Yahida, Yahya and Noor Amirah, Abdul Halim (2023) Synthesis of Biodiesel from Used Frying Oil Using Modified Banana Peel Waste as A Heterogeneous Catalyst. Platform: A Journal of Engineering, 7 (3). pp. 1-6. ISSN 2636-9877. (Published)

Nur Syafiqah, Fauzan and Nur Alia Farahanin, Mohd Tajuddin and Neroshini, Thanarajee and Dayana Hazwani, Mohd Suadi Nata and Ezrin Hani, Sukadarin and Widia, Mirta (2023) Risk factors associated with occupational stress among Malaysian construction professionals. Makara Journal of Health Research, 27 (2). pp. 128-134. ISSN 2356-3656. (Published)

Nur Syafiqah Shamimi, Mohd. Zali and Khairil Azman, Masri and Mazlan, Abu Seman (2024) Stone mastic asphalt modified with nano titanium dioxide and potential exposure to blast load: A review. The Open Civil Engineering Journal, 18 (e18741495280060). pp. 1-11. ISSN 1874-1495. (Published)

Nur Syahilia Syahira, Safie and Muhamad Nasir, Murad and Lih, Tan Chye and Azwan Iskandar, Azmi and Wan Azmi, Wan Hamzah and Mohd, Danish (2022) Roles of eco-friendly non-edible vegetable oils in drilling inconel 718 through minimum quantity lubrication. Lubricants, 10 (211). pp. 1-20. ISSN 2075-4442 (Online). (Published)

Nur Zalikha, Khalil and Mohamed Feisal, Johanne and M., Ishak (2019) Influence of Al2O3 nanoreinforcement on the adhesion and thermomechanical properties for epoxy adhesive. Composites Part B: Engineering, 172. pp. 9-15. ISSN 1359-8368. (Published)

Nur Zatul Akmar, Hamzah and Siti Nurlaili, Karim and Selvarajoo, Mathuri and Noor Azida, Sahabudin (2022) Dynamics of nonlinear operator generated by lebesgue quadratic stochastic operator with exponential measure. Mathematics and Statistics, 10 (4). pp. 861-867. ISSN 2332-2071. (Published)

Nur'afini, Dzulkifli and Noor Nabilah, Sarbini and Izni Syahrizal, Ibrahim and Nur Izieadiana, Abidin and Fadzil, Mat Yahaya and Nik Zainab, Nik Azizan (2021) Review on maintenance issues toward building maintenance management best practices. Journal of Building Engineering, 44 (102985). pp. 1-13. ISSN 2352-7102. (Published)

Nuraihan, Ismail and Mohd Zamani, Ahmad and Mohd Nasir, Hussain and Amalina Nisa, Ariffin and Ismail, Zainol (2019) Modelling of water supply cost for offshore platforms. International Journal of Scientific and Technology Research, 8 (12). pp. 58-64. ISSN 2277-8616. (Published)

Nuranis Yasira, Abd Halim and Fatin Zafirah, Mansur and Noor Intan Shafinas, Muhammad and Mohammad Affendy, Omardin and Nursyafawati, Bakhari (2024) Thermal Behaviour Assessment of Brick Utilizing Plastic Waste for Enhanced Insulation Properties. Platform: A Journal of Engineering, 8 (1). pp. 23-28. ISSN 2636-9877. (Published)

Nurazima, Ismail and Mohd Hafizi, Zohari and Che Eddy Nizwan, Che Ku Husin and Lim, Koksing (2024) Signal processing techniques of lamb waves for structural health monitoring system- A review. Journal of Advanced Research in Applied Sciences and Engineering Technology, 42 (2). pp. 38-48. ISSN 2462-1943. (Submitted) (Submitted)

Nurazleen, Abdul Majid and Nurul Farahain, Mohammad and Abdul Rahman, Mohd Kasim and Sharidan, Shafie (2020) Mixed convection of micropolar fluid on a permeable stretching surface of another quiescent fluid. Malaysian Journal of Fundamental and Applied Sciences, 16 (4). pp. 487-492. ISSN 2289-599x. (Published)

Nurfarahin, Zainal and Hanis Hazirah, Arifin and Zardasti, Libriati and Nordin, Yahaya and Lim, Kar Sing and Norhazilan, Md Noor (2018) Mechanical Properties of Graphene-Modified Epoxy Grout for Pipeline Composite Repair. International Journal of Integrated Engineering, 10 (4). pp. 176-184. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Nurfarhana, Mustafa and Azahani Natasha, Azman and Ahmad Syahiman, Mohd Shah and Nurulfadzilah, Hassan and Mohamad Shaiful, Abdul Karim (2023) Study on effect of barium titanate concentration in epoxy-based composite towards dielectric material properties. Materials Today: Proceedings. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Nurhanis Sofiah, Abd Ghafar and Pasupuleti, Jagadeesh and Samykano, Mahendran and Kadirgama, Kumaran and Koh, Siaw Paw and Tiong, Sieh Kieh and Pandey, Adarsh Kumar and Yaw, Chong Tak and Natarajan, Sendhil Kumar (2023) Harnessing nature’s ingenuity: A comprehensive exploration of nanocellulose from production to cutting-edge applications in engineering and sciences. Polymers, 15 (3044). pp. 1-42. ISSN 2073-4360. (Published)

Nurhanis Sofiah, Abd Ghafar and Pasupuleti, Jagadeesh and Samykano, Mahendran and Pandey, Adarsh Kumar and Rajamony, Reji Kumar and Nur Fatin, Sulaiman and Zatil Amali, Che Ramli (2024) A class of promising fuel cell performance : International status on the application of nanofluids for thermal management systems. Materials Today Sustainability, 26 (100709). pp. 1-26. ISSN 2589-2347. (Published)

Nurhanis Sofiah, Abd Ghafar and Pasupuleti, Jagadeesh and Samykano, Mahendran and Rajamony, Reji Kumar and Pandey, Adarsh Kumar and Nur Fatin, Sulaiman and Zatil Amali, Che Ramli and Tiong, Sieh Kiong and Koh, Siaw Paw (2024) Potential coolants for fuel cell application: Multi-objective optimization of thermophysical properties and PPF calculation of hybrid palm oil nanofluids. Case Studies in Thermal Engineering, 53 (103931). pp. 1-17. ISSN 2214-157X. (Published)

Nurhanis Sofiah, Abd Ghafar and Samykano, Mahendran and Shahabuddin, Syed and Pandey, Adarsh Kumar and Kadirgama, Kumaran and Said, Zafar and Sudhakar, Kumarasamy (2022) Copper (II) oxide nanoparticles as additives in RBD palm olein : Experimental analysis and mathematical modelling. Journal of Molecular Liquids, 363 (119892). ISSN 0167-7322. (Published)

Nurhanis Sofiah, Abd Ghafar and Samykano, Mahendran and Sudhakar, Kumarasamy and Said, Zafar and Pandey, Adarsh Kumar (2023) Copper oxide/polyaniline nanocomposites-blended in palm oil hybrid nanofluid : Thermophysical behavior evaluation. Journal of Molecular Liquids, 375 (121303). pp. 1-16. ISSN 0167-7322. (Published)

Nurhidayah, Azmy and Ahmad Zairi, Mohd Zain (2016) The Application of Technology in Enhancing Safety and Health Aspects on Malaysian Construction Projects. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7209-7213. ISSN 1819-6608. (Published)

Nurhidayah, Azmy and Ahmad Zairi, Mohd Zain (2018) Engineering technology curriculum development: bridging the gap between academia-industry through undergraduate final year project. Internation Journal of Academic Research in Progressive Education & Development, 7 (4). pp. 459-467. ISSN 2226-6348. (Published)

Nurhidayah, Azmy and Ahmad-Nazri, Elly HF and Liyana, Mohamed Yusof and Gad, Ghada M. (2023) The implementation of maintenance system in Malaysia’s public housing at Kota Bharu, Kelantan. International Journal of Integrated Engineering, 15 (2). pp. 308-316. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Nurillya, Zahimi and Farouk, A M and Saffuan, Wan Ahmad and Rahimi, A. Rahman (2024) Electronic submission in construction: Government approval practice and potential issues in Malaysia. Construction, 4 (1). pp. 1-6. ISSN 2785-8731. (Published)

Nurizzatul Atikha, Rahmat and Hagishima, Aya and Ikegaya, Naoki and Tanimoto, Jun (2018) Experimental study on effect of spires on the lateral nonuniformity of mean flow in a wind tunnel. Evergreen, 5 (1). pp. 1-15. ISSN 2189-0420. (Published)

Nurmaryam Aini, Hashim and Siti Kholijah, Abdul Mudalip and Rohaida, Che Man and Siti Zubaidah, Sulaiman (2023) Menhaden fish oil encapsulation by spray drying process: influence of different biopolymer materials, inlet air temperature and emulsion ratios. Journal of Chemical Technology and Biotechnology. ISSN 1097-4660. (Preprint)

Nurmunira, Muhammad and Ideris, Zakaria and Namdar, Abdoullah (2013) Modification of Kaolin Mineralogy and Morphology by Heat Treatment and possibility of Use in Geotechnical Engineering. International Journal of GEOMATE, 5 (2). pp. 685-689. ISSN 2186-2982 (print); 2186-2990(online). (Published)

Nurmunira, Muhammad and Abdoullah, Namdar and Ideris, Zakaria (2012) Improving Peat Engineering Properties by Natural Mineral Mixture. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 23-27. ISSN 2180-2742. (Published)

Nurmunira, Muhammad and Siddiqua, Sumi (2022) Calcium bentonite vs sodium bentonite: The potential of calcium bentonite for soil foundation. Materials Today: Proceedings, 48 (Part 4). pp. 822-827. ISSN 2214-7853. (Published)

Nurmunira, Muhammad and Siddiqua, Sumi (2021) Moisture-dependent resilient modulus of chemically treated subgrade soil. Engineering Geology, 285 (106028). pp. 1-13. ISSN 0013-7952. (Published)

Nurmunira, Muhammad and Siddiqua, Sumi (2019) Stabilization of silty sand using bentonite magnesium-alkalinization: Mechanical, physicochemical and microstructural characterization. Applied Clay Science, 183 (105325). pp. 1-12. ISSN 0169-1317. (Published)

Nurol Huda, Dahalan and Abdul Rahimi, Abdul Rahman and Saffuan, Wan Ahmad and Che Khairil Izam, Che Ibrahim (2023) Public monitoring of environmental management plan implementation in road construction projects : Key performance indicators. Journal of Engineering, Design and Technology. pp. 1-26. ISSN 1726-0531. (In Press / Online First) (In Press / Online First)

Nurol Huda, Dahalan and Rahimi, A. Rahman and Saffuan, Wan Ahmad and Che Khairil Izam, Che Ibrahim (2023) Public monitoring of environmental management plan implementation in road construction projects: key performance indicators. Journal of Engineering, Design and Technology, ahead-of-print (ahead-of-print). ISSN 1726-0531. (In Press / Online First) (In Press / Online First)

Nurol Huda, Dahalan and Rahimi, A. Rahman and Siti Hafizan, Hassan and Saffuan, Wan Ahmad (2023) Performance indicators for public evaluation of environmental management plan implementation in highway construction projects. International Journal of Disaster Resilience in the Built Environment, ahead of print (ahead of print). ISSN 1759-5908. (In Press / Online First) (In Press / Online First)

Nurol Huda, Dahalan and Rahimi, A. Rahman and Siti Hafizan, Hassan and Saffuan, Wan Ahmad (2024) Public assessment for environmental management plan implementation: Comparative study of performance indicators of road and highway construction projects. Journal of Construction Engineering and Management, 150 (7). pp. 1-20. ISSN 0733-9364. (Published)

Nursyahidatul Azwa, Awang and Azura, Amid and Zatul Iffah, Mohd Arshad (2023) Rhodopseudomonas palustris collagen-like recombinant protein purification using an aqueous two-phase system. IIUM Engineering Journal, 24 (1). pp. 40-56. ISSN 1511-788X. (Published)

Nurul, Izzati and Sheikh Ahmad, Zaki and Rijal, Hom Bahadur and Rey, Jorge Alfredo Ardila and Hagishima, Aya and Nurizzatul Atikha, Rahmat (2023) Investigation of thermal adaptation and development of an adaptive model under various cooling temperature settings for students’ activity rooms in a university building in malaysia. Buildings, 13 (36). pp. 1-25. ISSN 2075-5309. (Published)

Nurul Akmal, Che Lah and Aqilah, Kamaruzaman (2019) The optical quantification measurement on aggregated aqueous ZnO nanostructures upon exposure to tannic acid. Materials Research Express, 6 (12). ISSN 2053-1591. (Published)

Nurul Akmal, Che Lah and Murthy, Puhanes and Mohd Nashrul, Mohd Zubir (2022) The physical and optical investigations of the tannic acid functionalised Cu‑based oxide nanostructures. Scientific Reports, 12 (1). pp. 1-20. ISSN 2045-2322. (Published)

Nurul Aliyah, Zainal Abidin and Faiz, Arith and Adri Aflah, Shahrin Amri and Ahmad Nizamuddin, Muhammad Mustafa and Hafez, Sarkawi and Mohd Shahadan, Mohd Suan and Ahmad Syahiman, Mohd Shah and Siti Aisah, Mat Junos and Fauziyah, Salehuddin (2023) Growth time dependence on ZnO nanorods photoanode for solar cell applications. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (2). pp. 339-351. ISSN 2462-1943. (Published)

Nurul Aliyah, Zainal Abidin and Faiz, Arith and Nur Syamimi, Noorasid and Hafez, Sarkawi and Ahmad Nizamuddin, Muhammad Mustafa and Nur Ezyanie, Safie and Ahmad Syahiman, Mohd Shah and Mohd Asyadi, Azam and Chelvanathan, Puvaneswaran and Amin, Nowshad (2023) Dopant engineering for ZnO electron transport layer towards efficient perovskite solar cells. RSC Advances, 13 (48). pp. 33797-33819. ISSN 2046-2069. (Published)

Nurul Aniyyah, Mohamad Sobri and Mohd Yusri, Mohd Yunus and Noorlisa, Harun (2023) A review of ion adsorption clay as a high potential source of rare earth minerals in Malaysia. Materials Today: Proceedings. pp. 1-8. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Nurul Aqilah, Mohamad and Nur Akmal Aqiilah, Abd Rasid and Nazaitulshila, Rasit and Alyza Azzura, Abd Rahman Azmi and Mohammad Hakim, Che Harun and Wan Mohd Hafizuddin, Wan Yussof and Nur Hanis Hayati, Hairom and Hajjar Hartini, Wan Jusoh and Hafizan, Juahir and Sofiah, Hamzah (2023) Study of landfill leachate coagulation using hybrid coagulant of copperas/lime. Desalination and Water Treatment, 304. pp. 181-189. ISSN 1944-3994. (Published)

Nurul Asmawati, Roslan and Sumaiya, Zainal Abidin and Uyi Osazuwa, Osarieme and Sim, Yee Chin and Y.H., Taufiq-Yap (2021) H2-rich syngas from glycerol dry reforming over Nibased catalysts supported on alumina from aluminum dross. International Journal of Hydrogen Energy, 46 (60). pp. 30959-30975. ISSN 0360-3199. (Published)

Nurul Athirah, Nasrudin and Chan, Weng Howe and Mohd Saberi, Mohamad and Safaai, Deris and Suhaimi, Napis and Shahreen, Kasim (2017) Pathway-based analysis with support vector machine (SVM-LASSO) for gene selection and classification. International Journal on Advanced Science, Engineering and Information Technology, 7 (4-2 Special). pp. 1609-1614. ISSN 2088-5334. (Published)

Nurul Athirah, R. and Doh, S. I. (2022) Key constraint in construction industry: A review. Construction, 2 (2). pp. 1-6. ISSN 2785-8731. (Published)

Nurul Atiqah, Ab Hakim and Farouk, A M and Saffuan, Wan Ahmad and Rahimi, A. Rahman (2024) Effect of mega railway projects on small and medium construction companies: Impact and problems. Construction, 4 (1). 21 -27. ISSN 2785-8731. (Published)

Nurul Balqis, Mohamed and Norzita, Ngadi and Wong, Syieluing and Noor Yahida, Yahya and Onn, Hassan and Inuwa, Ibrahim Mohammed and Opotu, Lawal Anako and Noorhalieza, Ali (2022) Facile synthesis of polyethylenimine-modified sugarcane bagasse adsorbent for removal of anionic dye in aqueous solution. Scientific African, 16 (e01135). pp. 1-17. ISSN 2468-2276. (Published)

Nurul Balqis, Mohamed and Norzita, Ngadi and Wong, Syieluing and Noor Yahida, Yahya and Onn, Hassan and Inuwa, Ibrahim Mohammed and Opotu, Lawal Anako and Noorhalieza, Ali (2022) Facile synthesis of polyethylenimine-modified sugarcane bagasse adsorbent for removal of anionic dye in aqueous solution. Scientific African, 16 (e01135). pp. 1-17. ISSN 2468-2276. (Published)

Nurul Farah Anisa, Hairolnizam and Muhammad Amirul Syafiq, Nasarudin and Ali Zainal-Abidin, Mohamad Termizi and Farah, Amalina and Abdul Syukor, Abd Razak and Suryati, Sulaiman (2024) The potential of biodegradable compostable eco-straw from Lepironia Articulata sp. (Purun/Kercut). Materials Today: Proceedings. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Nurul Farah Anisa, Hairolnizam and Suryati, Sulaiman and Abdul Syukor, Abd Razak and Nadzirah, Mohd Mokhtar and Nadiah, Mokhtar and Azrina, Abd Aziz and Chin, Khor Bee (2024) Synergic Usage of Pistia stratiotes sp., Eichhornia crassipes sp., Typha angustifolia sp., and Lepironia Articulata sp. Plants for Sewage Treatment via Phytoremediation Technology. The Open Civil Engineering Journal, 18 (e18741495285941). pp. 1-13. ISSN 1874-1495. (Published)

Nurul Haiza, Sapiee and Muhammad Hasif, Mat Saufi and Noor Fitrah, Abu Bakar and Fatmawati, Adam (2023) Fabrication and characterization of electrospun j-carrageenan based oral dispersible film with vitamin C. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Nurul Haiza, Sapiee and Muhammad Hasif, Mat Saufi and Noor Fitrah, Abu Bakar and Fatmawati, Adam (2023) Fabrication and characterization of electrospun κ-carrageenan based oral dispersible film with vitamin C. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Nurul Haiza, Sapiee and Muhammad Hasif, Mat Saufi and Noor Fitrah, Abu Bakar and Fatmawati, Adam (2023) Fabrication and characterization of electrospun κ-carrageenan based oral dispersible film with vitamin C. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (Published)

Nurul Hazlina, Noordin and Kamil Khalili, Abdullah and Eu, Phuah Soon (2024) Assessing the effectiveness of UMP STEM cube as a tool for developing digital making skill sets. IEEE Transactions on Education. pp. 1-11. ISSN 0018-9359. (In Press / Online First) (In Press / Online First)

Nurul Huda, Abu Bakar and Ali, Gomaa A. M. and Jamil, Ismail and Algarni, H. and K. F., Chong (2019) Size-dependent corrosion behavior of graphene oxide coating. Progress in Organic Coatings, 134. pp. 272-280. ISSN 0300-9440. (Published)

Nurul Husna, Zarudin and Erna, Normaya and Syamimi Sulfiza, Shamsuri and Anwar, Iqbal and Mohd Bijarimi, Mat Piah and Zanariah, Abdullah and Ahmad Sazali, Hamzah and Mohammad Norazmi, Ahmad (2024) Development of chemometric-assisted supercritical fluid extraction of effective and natural tyrosinase inhibitor from Syzygium aqueum leaves. International Journal of Biological Macromolecules, 258 (129168). pp. 1-14. ISSN 0141-8130. (Published)

Nurul Izzati, Azahar and Nadzirah, Mohd Mokhtar and Syed, Mahmood and Mohd Aizudin, Abd Aziz and Mohd Azmir, Arifin (2023) Evaluation of Piper Betle L. extracts and its antivirulence activity towards P. Aeruginosa. Jurnal Teknologi (Sciences and Engineering), 85 (1). pp. 133-140. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Nurul Nadia, Mohd Zawawi and Wan Hamzah, Azmi and Mohamad Redhwan, Abd Aziz and Ramadhan, Anwar Ilmar and Ali, Hafiz Muhammad (2022) Optimization of air conditioning performance with Al2O3-SiO/PAG composite nanolubricants using the response surface method. Lubricants, 10 (243). pp. 1-21. ISSN 2075-4442. (Published)

Nurul Nadia, Mohd Zawawi and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Hafiz, Muhammad Ali (2022) Performance of air-conditioning system with different nanoparticle composition ratio of hybrid nanolubricant. Micromachines, 13 (1871). pp. 1-18. ISSN 2072-666X. (Published)

Nurul Nadia, Mohd Zawawi and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Ramadhan, Anwar Ilmar (2022) Performance optimization of automotive air-conditioning system operating with al2o3-sio2/pag composite nanolubricants using taguchi method. Automotive Experiences, 5 (2). pp. 121-136. ISSN 2615-6202. (Published)

Nurul Nadrah Aqilah, Tukimat and Ahmad Saifuddin, Othman and Saffuan, Wan Ahmad and Khairunisa, Muthusamy (2018) Evaluation of Climate Variability Performances using Statistical Climate Models. Sains Malaysiana, 47 (1). pp. 77-84. ISSN 0126-6039. (Published)

Nurul Nadrah Aqilah, Tukimat and Noor Nabilah, Sarbini and Izni Syahrizal, Ibrahim and Chau, Khun Ma and Khairunisa, Muthusamy (2017) Fresh and Hardened State of Polymer Modified Concrete and Mortars – A Review. MATEC Web of Conferences, 103 (01025). pp. 1-10. ISSN 2261-236X. (Published)

Nurul Nadrah Aqilah, Tukimat and Nor Azlina, Alias (2016) Assessment the Potential of SRES Scenario for Kuala Sala, Malaysia. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 13 (3). pp. 6-12. ISSN 2320-334X (Print); 2278-1684 (Online). (Published)

Nurul Nadrah Aqilah, Tukimat and Sobri, Harun (2015) Climate change impact on rainfall and temperature in Muda irrigation area using multicorrelation matrix and downscaling method. Journal of Water and Climate Change, 6 (3). pp. 647-660. ISSN 2040-2244. (Published)

Nurul Nadrah Aqilah, Tukimat and Sobri, Harun (2019) Comparative study on the reservoir operation planning with the climate change adaptation. SN Applied Sciences, 1 (1449). ISSN 2523-3963 (Print); 2523-3971 (Online). (Published)

Nurul Nadrah Aqilah, Tukimat and Sobri, Harun (2021) Evaluation the performances of stochastic streamflow models for the multi reservoirs. International Journal of Integrated Engineering, 13 (1). 303 -310. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Nurul Nafisah, Abdul Karim and Salwa, Mahmood and Helmy Mustafa, El Bakri and Ismail, Abdul Rahman and Mohd Fahmi, Badulrudin and Norazlianie, Sazali (2024) Development of a Survey Instrument for Measuring Firefighter Ergonomic Factors in Hose Rolling Activity A Pilot Study. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 125-135. ISSN 2289-7895. (Published)

Nurul Natasha, Nasrudin and Nur Farhayu, Ariffin and Aizat, Alias and Abdul Muiz, Hasim and Muhammad Nor Syahrul, Zaimi (2023) Experimental Validation of Reinforced Concrete Beam Incorporating Coal Fly Ash and Coal Bottom Ash Using Numerical Analysis. International Journal of Integrated Engineering, 15 (2). pp. 228-236. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Nurul Sahida, Hassan and Aishah, Abdul Jalil and Nor Aiza, Abdul Fatah and Hussain, Ijaz and Rahman, A. F.A. and Dolit, S. A.M. and Kamarizan, Kidam and Rahimah, Jusoh and Muhammad Arif, Ab Aziz and Herma Dina, Setiabudi and Cheng, Chin Kui (2022) Optimization of boron dispersion on fibrous-silica-nickel catalyst for enhanced CO2 hydrogenation to methane. International Journal of Hydrogen Energy, 47 (72). pp. 30896-30907. ISSN 0360-3199. (Published)

Nurul Syafiqah, Abdul Razak and Aizat, Alias and Nor Maslina, Mohsan and Siti Aliyyah, Masjuki (2023) Numerical Investigation of the Failure of Stiffened Steel Plates Subjected to Near-Field Blast Loads. Journal of Failure Analysis and Prevention, 23 (2). pp. 569-591. ISSN 1547-7029. (Published)

Nurul Waheeda, Abdu Rahman and Mohd Aizudin, Abd Aziz (2022) The effects of additives on anti-wear properties of lubricating grease formulated from waste engine oil. Egyptian Journal of Petroleum, 31 (3). pp. 71-76. ISSN 1110-0621 (Print); 2090-2468 (Online). (Published)

Nyan, Phang Sook and Syed Mohd Saufi, Tuan Chik and Syamsul Bahari, Abdullah and Mazrul Nizam, Abu Seman and Malyanah, Mohd Taib (2018) Tetrabutylphosphonium trifluoroacetate ([P4444]CF3 COO) thermoresponsive ionic liquid as a draw solution for forward osmosis process = Larutan ionik responsif haba tetrabutilfosfonium trifluoroasetat ([P4444]CF3 COO) sebagai larutan penarik untuk proses osmosis kehadapan. Malaysian Journal of Analytical Sciences, 22 (4). pp. 605-611. ISSN 1394-2506. (Published)

Odili, Julius Beneoluchi and Noraziah, Ahmad and Alkazemi, Basem Y. and M., Zarina (2022) Stochastic process and tutorial of the African bufalo optimization. Scientific Reports, 12 (17319). pp. 1-17. ISSN 2045-2322. (Published)

Olanrewaju, Rashidah Funke and Khan, Burhan Ul Islam and Goh, Khang Wen and Hashim, Aisha Hassan Abdalla and Khairul Azami, Sidek and Zuhani Ismail, Khan and Hamdan, Daniyal (2022) A holistic architecture for a sales enablement sensing-as-a-service model in the IoT environment. Information (Switzerland), 13 (514). pp. 1-22. ISSN 2078-2489. (Published)

Omer, Abdeen Mustafa (2012) Built Environment: Relating The Benefits of Renewable Energy Technologies. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 561-575. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

Omer, Mazen M. and Kineber, Ahmed Farouk and Oke, Ayodeji Emmanuel and Kingsley, Chukwuma and Alyanbaawi, Ashraf and Rached, Ehab Farouk and Elmansoury, Ali (2023) Barriers to using cloud computing in sustainable construction in Nigeria : A fuzzy synthetic evaluation. Mathematics, 11 (1037). pp. 1-20. ISSN 2227-7390. (Published)

Omer, Mazen M. and Moyo, Tirivavi and Ahmad Rizal, Alias and Abdul Rahimi, Abdul Rahman (2024) Development of workplace well-being indexes at construction sites. Journal of Engineering, Design and Technology, ahead-of-print (ahead-of-print). pp. 1-26. ISSN 1726-0531. (In Press / Online First) (In Press / Online First)

Omer, Mazen M. and Rahimi, A. Rahman and Almutairi, Saud (2022) Construction waste recycling: Enhancement strategies and organization size. Physics and Chemistry of the Earth, Parts A/B/C, 126 (103114). pp. 1-10. ISSN 1474-7065. (Published)

Omer, Mazen M. and Rahimi, A. Rahman and Almutairi, Saud (2022) Strategies for enhancing construction waste recycling: A usability analysis. Sustainability (Switzerland), 14 (10). pp. 1-18. ISSN 2071-1050. (Published)

Omer, Mazen Mohamed Alkhdar and Abdul Rahimi, Abdul Rahman and Muhammad Ashraf, Fauzi and Almutairi, Saud Jaza (2024) Key competencies for identifying construction activities that produce recyclable materials : An exploratory study. International Journal of Building Pathology and Adaptation. pp. 1-22. ISSN 2398-4708. (In Press / Online First) (In Press / Online First)

Omer, Mazen Mohamed Alkhdar and Nik Muhammad Adeeq, Mohd Ezazee and Lee, Yong Siang and Rajabi, Mohammad Sadra and Abdul Rahimi, Abdul Rahman (2022) Constructive and destructive leadership behaviors, skills, styles and traits in BIM-based construction projects. Buildings, 12 (2068). pp. 1-28. ISSN 2075-5309. (Published)

Osazuwa, Osarieme Uyi and Sumaiya, Zainal Abidin and Nurul Asmawati, Roslan and Fan, Xiaolei and Herma Dina, Setiabudi and Vo, Dai Viet N. and Onwudili, Jude Azubuike (2023) The role of catalyst synthesis on the enhancement of nickel praseodymium (III) oxide for the conversion of greenhouse gases to syngas. Clean Technologies and Environmental Policy, 25 (5). pp. 1569-1587. ISSN 1618-954X. (Published)

Oseh, Jeffrey Onuoma and Mohammad Noorul Anam, Mohd Norddin and Issham, Ismail and Duru, Ugochukwu I. and Gbadamosi, Afeez Olayinka and Agi, Augustine Aja and Ngouangna, Eugene Ngwana and Blkoor, Shafeeg O. and Yahya, Muftahu N. and Abdul Rahim, Risal (2023) Rheological and filtration control performance of water-based drilling muds at different temperatures and salt contaminants using surfactant-assisted novel nanohydroxyapatite. Geoenergy Science and Engineering, 228 (211994). pp. 1-18. ISSN 2949-8910. (Published)

Oseh, Jeffrey Onuoma and Norddin M.N.A., Mohd and Gbadamosi, Afeez Olayinka and Agi, Augustine Aja and Blkoor, Shafeeg O. and Ismail, Issham and Igwiloa, Kevin Chinwub and Igbafe, Anselm I. (2023) Polymer nanocomposites application in drilling fluids: A review. Geoenergy Science and Engineering, 222 (211416). pp. 1-23. ISSN 2949-8910. (Published)

Pal, Bhupender and Parameswaran, Abhilash Karuthedath and Wu, Bing and Děkanovský, Lukáš and Mazánek, Vlastimil and Sarkar, Kalyan Jyoti and Jose, Rajan and Sofer, Zdeněk (2023) Insights into the charge storage mechanism of binder-free electrochemical capacitors in ionic liquid electrolytes. Industrial and Engineering Chemistry Research, 62 (10). pp. 4388-4398. ISSN 0888-5885. (Published)

Pandey, Ashutosh K. and Kalidasan, B. and Reji Kumar, Rajamony and Rahman, Saidur and Tyagi, Vineet Veer and Krismadinata, Krismadinata and Said, Zafar and Salam, P. Abdul and Juanico, Dranreb Earl and Ahamed, Jamal Uddin and Sharma, Kamal and Samykano, Mahendran and Tyagi, S.K. (2022) Solar energy utilization techniques, policies, potentials, progresses, challenges and recommendations in asean countries. Sustainability (Switzerland), 14 (11193). pp. 1-26. ISSN 2071-1050. (Published)

Pang, Swee Yun and Suratman, Suhaimi and Tay, Joo Hui and Tan, Hock Seng and Mohd Tahir, Norhayati (2022) Spatial and temporal trends of polycyclic aromatic hydrocarbons in sediment cores of Brunei Bay, East Malaysia. Marine Pollution Bulletin, 179 (113670). pp. 1-7. ISSN 0025-326X. (Published)

Parameswary, Sundara and Mohd Rosli, Hainin and Che Puan, Othman and Kamal Z., Zamli (2015) Influence of Darkness Dry and Darkness Rainfall on Malaysian Expressway for Traffic Characteristics using Greenshield’s Model. Journal of Basic and Applied Scientific Research, 5 (11). pp. 34-42. ISSN 2090-4304 (Print); 090-424x (Online). (Published)

Parvez, M. S. and Rahman, Md Mustafizur and Mahendran, Samykano and Ali, Mohammad Yeakub (2023) Current advances in fabric-based airbag material selection, design and challenges for adoption in futuristic automobile applications. Materials Today: Proceedings. p. 123. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Parvez, Md. Shohan and Rahman, Md Mustafizur and Samykano, Mahendran and Mohammad, Yeakub Ali (2024) Surface Morphology and Thermo-Electrical Energy Analysis of Polyaniline (PANI) Incorporated Cotton Fabric. Energy Engineering, 121 (1). pp. 1-12. ISSN 0199-8595. (Published)

Pathak, Sudhir Kumar and Tyagi, Vineet Veer and Chopra, Kapil and Reji Kumar, Rajamony and Pandey, Adarsh Kumar (2023) Integration of emerging PCMs and nano-enhanced PCMs with different solar water heating systems for sustainable energy future: A systematic review. Solar Energy Materials and Solar Cells, 254 (112237). pp. 1-43. ISSN 0927-0248. (Published)

Peddakapu, K. and M. R., Mohamed and M. H., Sulaiman and Srinivasarao, P. and Kishore, D. J. K. and P. K., Leung (2021) Cuckoo optimised 2DOF controllers for stabilising the frequency changes in restructured power system with wind-hydro units. International Journal of Ambient Energy, 42 (11). pp. 1-16. ISSN Print: 0143-0750, Online: 2162-8246. (Published)

Peddakapu, kurukuri and Mohd Rusllim, Mohamed and Srinivasarao, P. and Arya, Yogendra and Leung, Puiki and Kishore, Dokala Janandra Krishna (2022) A state-of-the-art review on modern and future developments of AGC/LFC of conventional and renewable energy-based power systems. Renewable Energy Focus, 43. pp. 146-171. ISSN 1755-0084. (Published)

Peddakapu, kurukuri and Mohd Rusllim, Mohamed and Srinivasarao, P. and Veerendra, Arigela Satya and Kishore, Dokala Janandra Krishna and Leung, Puiki (2022) Review on automatic generation control strategies for stabilising the frequency deviations in multi-area power system. International Journal of Ambient Energy, 43 (1). pp. 5571-5594. ISSN 0143-0750. (Published)

Pham, Cham Q. and Alsaiari, Mabkhoot A. and Hieu, Nguyen Huu and Pham, Thuy Phuong Thi and Le Phuong, Duy Ha and Natarajan, Rajamohan and Herma Dina, Setiabudi and Vo, Dai Viet Nguyen and Trinh, Thanh H. and Pham, Phuong Thi Hong and Nguyen, Tung Manh (2023) Efficient methane dry reforming process with low nickel loading for greenhouse gas mitigation. Topics In Catalysis. pp. 1-13. ISSN 1022-5528. (Published)

Phuong, Duy Ha Le and Alsaiari, Mabkhoot A. and Pham, Cham Q. and Hieu, Nguyen Huu and T․ Pham, Thuy Phuong and Natarajan, Rajamohan and Pham, Duong Dinh and Vo, Dai Viet N. and Trinh, Thanh H. and Herma Dina, Setiabudi and Nguyen, Dang Le Tri and Nguyen, Tung Manh (2024) Carbon dioxide reforming of methane over modified iron-cobalt alumina catalyst : Role of promoter. Journal of the Taiwan Institute of Chemical Engineers, 155 (105253). pp. 1-11. ISSN 1876-1070. (Published)

Ping, Feng Lim and Kah, Hon Leong and Lan, Ching Sim and Azrina, Abd Aziz and Saravanan, Pichiah (2018) Amalgamation of N-graphene quantum dots with nanocubic like TiO2: an insight study of sunlight sensitive photocatalysis. Environmental Science and Pollution Research. pp. 1-10. ISSN 1614-7499. (Submitted) (Submitted)

Ponnarasy, Ganasen and Khan, Maksudur R. and M., Abul Kalam and Mohd Sabri, Mahmud (2014) Effect of Visible Light on Catalytic Hydrolysis of P-nitrophenyl Palmitate by the Pseudomonas Cepacia Lipase Immobilized on Sol–Gel Support. Bioprocess and Biosystems Engineering, 37 (11). pp. 2353-2359. ISSN 1615-7591 (print); 1615-7605 (online). (Published)

Poovaneshvaran, Sharvin and Jamshidi, Ali and Mohd Rosli, Mohd Hasan and Mohd Fahmi Haikal, Mohd Ghazali and Ahmed Gul, Waqar and Putra Jaya, Ramadhansyah (2023) Moisture sensitivity and heavy metal leaching potentials of asphalt mixtures incorporating rubber modifiers and wax-based admixture. Physics and Chemistry of the Earth, Parts A/B/C (103404). pp. 1-13. ISSN 1474-7065. (In Press / Online First) (In Press / Online First)

Pratikno, Heri and Mohd Zamri, Ibrahim and Jusak, . (2022) A novel fern-like lines detection using a hybrid of pre-trained convolutional neural network model and Frangi filter. Telkomnika (Telecommunication Computing Electronics and Control), 20 (3). pp. 607-620. ISSN 1693-6930. (Published)

Pravina K., Gunasekaran and Chin, S. C. (2023) Performance of bamboo biochar as partial cement replacement in mortar. Materials Today: Proceedings. pp. 1-9. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Pravina Kamini, G. and Kong, Fah Tee and Jolius, Gimbun and Chin, S. C. (2023) Biochar in cementitious material—A review on physical, chemical, mechanical, and durability properties. AIMS Materials Science, 10 (3). pp. 405-425. ISSN 2372-0484. (Published)

Pravina Kamini, Gunasekaran and Kong Fah, Tee and Jolius, Gimbun and Siew Choo, Chin (2023) Biochar in cementitious material—A review on physical, chemical, mechanical, and durability properties. AIMS Materials Science, 10 (3). pp. 405-425. ISSN 2372-0484. (Published)

Prayogo, Wisnu and Siregar, Januar Parlaungan and Soewondo, Prayatni and Nasution, Zulkifli and Hanami, Zarah Arwieny and Ikhwali, M. Faisi and Estim, Abentin and Suryawan, I. Wayan Koko (2023) The investigation on mineral wool performance as a potential filter to remove tss in cikapayang river, east jawa, indonesia. Environment and Natural Resources Journal, 21 (101936). pp. 1-10. ISSN 1686-5456. (Published)

Priyatachni, Subramanie and Shamala Devi, Vijayakumar and Norida, Ridzuan (2021) Effect of wax inhibitor and sodium cloisite, Na+ nanoparticle on wax deposition of Malaysian crude oil through cold finger analysis. Petroleum Science and Technology, 39 (19-20). pp. 860-877. ISSN 1091-6466 (Print), 1532-2459 (Online). (Published)

Prottasha, Nusrat Jahan and Murad, Saydul Akbar and Abu Jafar, Md Muzahid and Rana, Masud and Kowsher, Md and Adhikary, Apurba and Biswas, Sujit and Bairagi, Anupam Kumar (2023) Impact learning : A learning method from feature’s impact and competition. Journal of Computational Science, 69 (102011). pp. 1-10. ISSN 1877-7503. (Published)

Prottasha, Nusrat Jahan and Murad, Saydul Akbar and Muzahid, Abu Jafar Md and Rana, Masud and Kowsher, Md and Adhikary, Apurba and Biswas, Sujit and Bairagi, Anupam Kumar (2023) Impact learning: A learning method from feature’s impact and competition. Journal of Computational Science, 69 (102011). pp. 1-10. ISSN 1877-7503. (Published)

Putra Jaya, Ramadhansyah and Harith, N S H and M. I., Adiyanto and N I, Ramli Ground motion observation of Sabah earthquakes on the use of Next Generation Attenuation (NGA) Ground-Motion Models. IOP Conference Series: Earth and Environmental Science, 682 (012050). pp. 1-9. ISSN 1755-1315. (Published)

Putra Jaya, Ramadhansyah and K. A., Masri and E., Ganesan and Doh, Shu Ing and Jasni, N. E. and AlSaffar, Z. H. and Mohammed, A. A. (2021) Volumetric properties and abrasion resistance of stone mastic asphalt incorporating eggshell powder. IOP Conf. Series: Earth and Environmental Science, 682 (012058). pp. 1-7. ISSN 1755-1307 (Print); 1755-1315 (Online). (Published)

Putra Jaya, Ramadhansyah and Mohd Haziman, Wan Ibrahim and Mangi, Sajjad Ali and Sharifah Salwa, Mohd Zuki and Supriyatno, Dadang (2020) Influence of palm oil biomass clinker and empty fruit bunch fibers on concrete properties. IIUM Engineering Journal, 21 (2). pp. 100-110. ISSN 1511-788X. (Published)

Putra Jaya, Ramadhansyah and Mohd Khairy, Burhanudin and Mohd Haziman, Wan Ibrahim and Mohd Syahrul Hisyam, Mohd Sani and Mohd Irwan, Juki and Norwati, Jamaluddin and Shahiron, Shahidan and Nurul Fasihah, Basirun and Mohamad Zulhairi, Mohd Bosro (2018) Influence of ground coal bottom ash with different grinding time as cement replacement material on the strength of concrete. Malaysian Construction Research Journal, 4 (2). pp. 93-102. ISSN 2590-4140. (Published)

Putra Jaya, Ramadhansyah and Munirwan, Reza Pahlevi and Bunyamin, Bunyamin (2024) Innovative materials to build a better infrastructure development. Smart and Green Materials, 1 (1). pp. 1-3. ISSN 3048-426X. (Published)

Qasem, Ramzi and Sunarti, Abd Rahman and Mohd Bijarimi, Mat Piah and Hasan Alhadadi, Waleed Ali Murshed (2022) Polyvinylidene fluoride (PVDF)/Poly (Ether Sulfones) (PES) blend membrane for CO2/ CO4 for gas separation. Current Science and Technology (CST), 2 (2). pp. 42-48. ISSN 2785-8804. (Published)

Qasim, Adeeb Mansoor and Aljanabi, Mohammad and Shahreen, Kasim and Mohd Arfian, Ismail and Gusman, Taufik (2022) Study the field of view influence on the monchromatic and polychromatic image quality of a human eye. International Journal on Informatics Visualization, 6 (1-2). pp. 151-154. ISSN 2549-9904. (Published)

Qasim, Ban and Abdul Syukor, Abd Razak and Siddique, Md. Nurul Islam and Suryati, Sulaiman and Nur Hamizah, H. (2015) Controlling Assessment of Disinfection by Products in Drinking Water - A Review. International Journal of Innovative Science, Engineering & Technology, 2 (12). pp. 896-902. ISSN 2348-7968. (Published)

Qazani, Mohammad Reza Chalak and Aslfattahi, Navid and Kulish, Vladimir Vladimirovich and Asadi, Houshyar and Schmirler, Michal and Zakarya, Muhammad and Alizadehsani, Roohallah and Haleem, Muhammad and Kadirgama, Kumaran (2024) Specific heat capacity extraction of soybean oil/mxene nanofluids using optimized long short-term memory. IEEE Access, 12. pp. 59049-59062. ISSN 2169-3536. (Published)

Quanjin, Ma and Idris, Mat Sahat and M. R. M., Rejab and Shukur, Abu Hassan and Zhang, Bo and Merzuki, M.N.M. (2019) The energy-absorbing characteristics of filament wound hybrid carbon fiber-reinforced plastic/polylactic acid tubes with different infill pattern structures. Journal of Reinforced Plastics and Composites, 38 (23-24). pp. 1067-1088. ISSN 0731-6844 (print); 1530-7964 (online). (Published)

Quanjin, Ma and Mohd Ruzaimi, Mat Rejab and Muhammad Syafiq, Idris (2022) Dataset of the lab-scale 3-axis winding machine integrated with the portable real-time winding angle measurement system. Data in Brief, 45 (108731). pp. 1-6. ISSN 2352-3409. (Published)

Quanjin, Ma and Mohd Ruzaimi, Mat Rejab and Shukur, Hj Abu Hassan and Hu, Haichao and Mohammad, Azeem and Yunus Nasution, Ahmad (2023) Impact behaviour of spherical-roof contoured-core (SRCC) sandwich panel under the low-velocity impact (LVI) : A numerical investigation. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Qummare, Azam and Ahmed Mahjub, Alhaj and Mohd Shukur Zainol, Abidin and Mohd Aizudin, Abd Aziz and Nurul Musfirah, Mazlan (2023) An outline of alternative aviation fuels from sustainable resources. Jurnal Teknologi (Sciences and Engineering), 85 (1). pp. 11-19. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Qusay I., Sarhan and Ahmed, Bestoun S. and Bures, Miroslav and Kamal Z., Zamli (2022) Software module clustering: An in-depth literature analysis. IEEE Transactions on Software Engineering, 48 (6). pp. 1905-1928. ISSN 0098-5589. (Published)

Radeef, Hasanain Radhi and Norhidayah, Abdul Hassan and Mohd Zul Hanif, Mahmud and Ahmad Razin, Zainal Abidin and Putra Jaya, Ramadhansyah and Che Ros, Ismail and Hind Fadhil, Abbas (2022) Linear viscoelastic response of semi-circular asphalt sample based on digital image correlation and XFEM. Measurement, 192 (110866). pp. 1-12. ISSN 0263-2241. (Published)

Radhiyah, Abd Aziz and Maisalsadila, Ismail (2018) Effect of Ferritic - Martensitic Constituent on Mechanical Property and Corrosion Behaviour of Medium Carbon Dual Phase (DP) Steel. Saudi Journal of Engineering and Technology, 3 (3). pp. 188-191. ISSN 2415-6264 . (Published)

Radzi, Afiqah R. and Nur Farhana, Azmi and Syahrul Nizam, Kamaruzzaman and Algahtany, Mohammed and Abdul Rahimi, Abdul Rahman (2024) Challenges in construction readiness for BIM-based building projects. Journal of Asian Architecture and Building Engineering. pp. 1-17. ISSN 1346-7581. (In Press / Online First) (In Press / Online First)

Rahim, Md. Abdur and Rahman, Md. Arafatur and Rahman, Md. Mustafizur and Zaman, Nafees and Moustafa, Nour and Razzak, Imran (2022) An intelligent risk management framework for monitoring vehicular engine health. IEEE Transactions on Green Communications and Networking, 6 (3). pp. 1298-1306. ISSN 2473-2400. (Published)

Rahimah, Embong and Kusbiantoro, Andri (2014) Study on the Early Hydration of Cement Paste Containing Sodium Chloride. Applied Mechanics and Materials, 621. pp. 35-38. ISSN 1662-7482. (Published)

Rahimah, Embong and Kusbiantoro, Andri and Nasir, Shafiq and Muhd Fadhil, Nuruddin (2016) Strength and Microstructural Properties of Fly Ash Based Geopolymer Concrete Containing High-Calcium and Water Absorptive Aggregate. Journal of Cleaner Production, 112 (1). pp. 816-822. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Rahimah, Embong and Nasir, Shafiq and Kusbiantoro, Andri and Muhd Fadhil, Nuruddin (2016) Effectiveness of Low-Concentration Acid and Solar Drying as Pretreatment Features for Producing Pozzolanic Sugarcane Bagasse Ash. Journal of Cleaner Production, 112 (Prt 1.). pp. 953-962. ISSN 0959-6526 (print); 1879-1786 (online). (Published)

Rahimah, Jusoh and Roslinda, Nazar and Pop, Ioan (2019) Impact of heat generation/absorption on the unsteady magnetohydrodynamic stagnation point flow and heat transfer of nanofluids. International Journal of Numerical Methods for Heat and Fluid Flow, 30 (2). pp. 557-574. ISSN 0961-5539. (Published)

Rahman, Md. Arafatur and A. Taufiq, Asyhari and Ibnu Febry, Kurniawan and Ali, Md Jahan and M. M., Rahman and Karim, Mahima (2020) A scalable hybrid MAC strategy for traffic-differentiated IoT-enabled intra-vehicular networks. Computer Communications, 157. pp. 320-328. ISSN 0140-3664. (Published)

Rahman, Md. Arafatur and Asyhari, A. Taufiq and Leong, L. S. and Satrya, G. B. and Tao, M. Hai and Mohamad Fadli, Zolkipli (2020) Scalable machine learning-based intrusion detection system for IoT-enabled smart cities. Sustainable Cities and Society, 61 (102324). pp. 1-14. ISSN 2210-6707. (Published)

Rahman, Md. Arafatur and Md. Abdur, Rahim and Rahman, Md Mustafizur and Moustafa, Nour and Imran, Razzak and Ahmad, Tanvir and Patwary, Mohammad N. (2022) A secure and intelligent framework for vehicle health monitoring exploiting big-data analytics. IEEE Transactions on Intelligent Transportation Systems. pp. 1-16. ISSN 1524-9050. (Published)

Rahman, Mizanur and Kamal Zuhairi, Zamli and Kader, Md Abdul and Roslina, Mohd Sidek and Din, Fakhrud (2024) Comprehensive review on the state-of- the-arts and solutions to the test redundancy reduction problem with taxonomy. Journal of Advanced Research in Applied Sciences and Engineering Technology, 35 (1). pp. 62-87. ISSN 2462-1943. (Published)

Rahman, Mizanur and Roy, Partha Protim and Ali, Mohammad and Gonçalves, Teresa and Sarwar, Hasan (2023) Software effort estimation using machine learning technique. International Journal of Advanced Computer Science and Applications, 14 (4). pp. 822-827. ISSN 2158-107X. (Published)

Rahman, Mizanur and Sarwar, Hasan and Kader, Md Abdul and Gonagalves, Teresa and Tin, Ting Tin (2024) Review and empirical analysis of software effort estimation. IEEE Access. p. 1. ISSN 2169-3536. (In Press / Online First) (In Press / Online First)

Rajabi, Mohammad Sadra and Afiqah R., Radzi and Rezaeiashtiani, Mohammad and Famili, Alireza and Rashidi, Mohammad Emad and Abdul Rahimi, Abdul Rahman (2022) Key assessment criteria for organizational bim capabilities : A cross-regional study. Buildings, 12 (1013). pp. 1-20. ISSN 2075-5309. (Published)

Rajamony, Reji Kumar and B, Kalidasan and Lagari, Imtiaz Ali and Paw, Johnny Koh Siaw and Nurhanis Sofiah, Abd Ghafar and Suraparaju, Subbarama Kousik and Pandey, Adarsh Kumar and Samykano, Mahendran and Soudagar, Manzoore Elahi M. and Khan, T. M.Yunus (2024) Progress in research and technological developments of phase change materials integrated photovoltaic thermal systems : The allied problems and their mitigation strategies. Sustainable Materials and Technologies, 40 (e00921). pp. 1-44. ISSN 2214-9937. (Published)

Rajamony, Reji Kumar and Paw, Johnny Koh Siaw and Pandey, Adarsh Kumar and Tak, Yaw Chong and Pasupuleti, Jagadeesh and Tiong, Sieh Kiong and Yusaf, Talal F. and Samykano, Mahendran and Nurhanis Sofiah, Abd Ghafar and Kalidasan, B. and Ahmed, Oday A. and Kadirgama, Kumaran (2024) Energizing the thermophysical properties of phase change material using carbon-based nano additives for sustainable thermal energy storage application in photovoltaic thermal systems. Materials Today Sustainability, 25 (100658). pp. 1-17. ISSN 2589-2347. (Published)

Rajan, Jose and Wali, Qamar and Iqbal, Yaseen and Elumalai, Naveen Kumar and Uddin, Ashraf (2018) Tandem perovskite solar cells. Renewable and Sustainable Energy Reviews, 84. pp. 89-110. ISSN 1364-0321. (Published)

Rajan, Kumaresan and Mahendran, Samykano and Kumaran, Kadirgama and Adarsh, Kumar Pandey and Md Mustafizur, Rahman (2023) Effects of printing parameters on the mechanical characteristics and mathematical modeling of FDM-printed PETG. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Ramadan, Syed Taha Yeasin and Sakib, Tanjim and Farid, Fahmid Al and Islam, Md Shofiqul and Junaidi, Abdullah and Bhuiyan, Md Roman and Mansor, Sarina and Hezerul, Abdul Karim (2024) Improving wheat leaf disease classification : Evaluating augmentation strategies and CNN-Based models with limited dataset. IEEE Access, 12. pp. 69853-69874. ISSN 2169-3536. (Published)

Ramadhan, Anwar Ilmar and Wan Azmi, Wan Hamzah and Rizalman, Mamat and Diniardi, Ery and Hendrawati, Tri Yuni (2022) Experimental investigation of cooling performance in automotive radiator using al2o3-tio2-sio2 nanofluids. Automotive Experiences, 5 (1). pp. 28-39. ISSN 2615-6202. (Published)

Ramalingam, Mritha and Chinnavan, Elanchezhian and Nur Syamimi, Jasmi and Goh, Mei Xin and Yuvaneswary, Santhiresegar and Rishikesavan, Ragupathy (2019) Alarm device for self-tracking of progression during wrist rehabilitation. International Journal of Prognostics and Health Management, 10 (11). pp. 1-8. ISSN 2153-2648. (Published)

Ramalingam, Mritha and Puviarasi, R. (2018) Vehicle traffic differentiation and scheduling in sensor network using Ns2. International Journal of Pure and Applied Mathematics, 119 (16). pp. 3915-3920. ISSN 1311-8080 (Print); 1314-3395 (Online). (Published)

Ramalingam, Mritha and Puviarasi, R. and Nur Diyana Afikah, Zakariah and Chinnavan, Elanchezhian (2018) Developing mobile application for medicine expiry date detection. International Journal of Pure and Applied Mathematics, 119 (16). pp. 3895-3901. ISSN 1311-8080 (print); 314-3395 (online). (Published)

Raman, Subashini and Khan, Arshad Ali and Mahmood, Syed (2022) Nose