Browse by Type

Abang Irfan, Abang Abdul Halil (2007) Hand gesture recognition system using image processing. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

'

'Alawiyyah, Mely (2014) Tunas mahkota tuition centre portal (TMTP). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

'Imran, Ahmad Rosdi (2012) Design and investigate the manual sun tracking system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

'Umayr Hasan, Sohaimi (2007) Fatigue strength to the different type of specimens and shapes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

A

A'in Syahira, Ratimin (2014) Study on citric acid as alternative admixtures for ordinary portland cement based binder. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

A. Razak, Mustapha (2017) Performance of solid waste by product (palm oil clinker) as partial coarse aggregate replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aainaa Hazwani, Mohd Hashim (2009) The development of embedded low-pass filter for vibration control of a flexible manipulator. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Aainaa Izyan, Nafsun (2008) Product optimization in vinyl acetate monomer process using model predictive control. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aaron, Kong Chak Ho (2019) Electroporation of lignocellulosic biomass. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Aasha, Thiaharajan (2018) The probability distribution of annual maximum hourly and daily rainfall in Kemaman. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aatiq Aftini, Ab Rahman (2009) Investigation on the behavior of wastewater from industrial cooling water systems. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ab Aziz, Nadira (2010) Effect of pH and ionic strength on membrane flux in the separation of escherichia coli by using cross-flow microfiltration. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ab Rahman, Mohd Nooh (2008) Noise source identification of engine dynamometer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ab. Halim, Nurul Iffah (2010) Synthesis of bacterial cellulose by Acetobacter Xylinum sp. using pineapple pith for biocomposite application. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Abang Ma'aruf, Abang Bussri (2009) Numerical simulation of flow pattern and heat transfer mechanism from a heated cylinder in cross flow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Azrin Firdaus, A Rahim (2008) Line followers robot using PID controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abd Faiz, Muhammad (2010) Effect of abrasive tools on surface finishing when grinding mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Gafar, Bashir (2009) Preliminary design and development of three wheel car for disable person. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Halim, Abdullah @ Shafei (2008) Carbon dioxide (CO2) laser cut quality of acrylic using different feed rate and constant power. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Hamid, Hat (2007) Design and fabrication of mini foldable table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Hisham, Mohamad (2008) Investigation on mechanical properties of heat treated low carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Rahim, Ibrahim (2012) The survivors of low class contractor in construction industry related government contract with specific at Kelantan. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Abd Rahman, Diyanti (2010) Biodiesel production via homogeneous lewis acid catalyzed transesterification. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abd Rahman Fahmi, Mat Hasan (2012) Analyze the inefficient takt time production and high customer complaint for support wheel carrier component to improve Lean production system level at Autokeen Sdn.Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Abd Rahman Fahmi, Mat Hasan (2008) Development of storage bending tools cabinet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Razak, Muhammad Ab. Basith (2008) Wireless mobile ultrasonic detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abd. Ghani, Muhammad Khairi (2007) Microcontroller based smart fan system. Facutly of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abd. Rani, Mior Mohammad Hafiizh (2007) Active infrared motion detector for house security system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdul Akram Azfar, Abd Fadzir (2022) Modelling Study Ol High-Current Density Chlorophyll-Based Dyesensitized Solar Cell. College of Engineering, Universiti Malaysia Pahang.

Abdul Aziz, Safiee (2010) Design and manufacture simple portable astro receiver stand. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Azwan, Abdol Zahar (2009) Effects of injection molding gate mechanism on parameters machining and defects of book tray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Basith, Abdul Halim (2014) Workability and compressive strength of concrete containing crushed cockle shell as partial fine aggregate replacement material. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Abdul Faizal, Abd Halim (2008) Simulation test of disc brake functionality using computer aided engineering software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Ghani, Khairul A'Alam (2007) Obstacle avoidance mobile robot. Faculty of Electrical & Electronic, Universiti Malaysia Pahang.

Abdul Hadi, Abd Majid (2007) Modelling and fabrication of cylinder head for single cylinder two stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hadi, Abd Majid (2010) Optical study of ethanol gasoline blends with or without heating. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hadi, Abdul Aziz (2007) Analyze the rear suspension structure for passenger car. Faculty of Mechanical Engineering, University Malaysia Pahang..

Abdul Hadi, Abdul Ghani (2012) Food ordering system using IPad. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Abdul Hadi, A Rahman (2014) Denitrogenation of diesel using ionic liquid characterization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Hadi, Che Hussin (2013) Leakage detection in pipelines using synchrosqueeze wavelet transform. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Abdul Hadi, Shamsul Kamar (2012) Design and development of motoraise grinding valve for motorcycle engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Haffizh, Zulkifli (2013) Investigation the effect of cationic surfactant on heat transfer performance in heat exchanger. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Hafiz, Mohamad (2007) Design and development of autonomous guided vehicle (AGV). Faculty of Mechanical Engineering, University Malaysia Pahang.

Abdul Hafiz, Mohd Idzhan (2016) Water lever measure and control using ultrasonic sensor. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Abdul Hafiz, Ramli (2008) Design and development of single seater electric sccoter for short distance application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hakim, Rahmad (2006) Study on the effect of substrates concentration in the production of xylanase from aspergillus niger using palm kernel cake. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Hakim, Kassim (2008) Ultrasonic motion detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdul Halim, Hadzir (2010) Development of automated storage and retrieval system (AS/RS) prototype. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hisham, Ruslan (2009) Effect of cobalt laurate on the photo-degradation of high density polyethylene. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Kadir, Samta (2013) Leak detection in pipelines using wavelet and cepstrum analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Karim, Shaikh Abdul Nasir (2013) Development of Polyvinylidene Fluoride - Polydimethylsiloxane (Pvdf-Pdms) Thin Film Composite (Tfc) Membrane For Co2/ N2 Gas Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Khairul, Abd Hamid (2014) A cfd simulation study on the effect of oil leaking rate from damaged submarine pipeline. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Khaliq, Abdul Kadir (2010) Design and fabrication of umbrella swing stand. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Latif Aizat, Mohamad Haniff (2008) Speed control of DC motor using pole placement controller implementation with PLC. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdul Muhaimin, Aris (2013) Experimental investigation of the minimum quantity lubrication in end-milling of AA6061T6 by coated carbide tools. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Muiz, Jaafar (2013) Experiment and analysis of motocycle exhaust design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Muiz, Roomai Nor (2010) Embedded based remote monitoring and controlling system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdul Muizz, Abdul Majid (2018) Smart door lock bluetooth using mobile android application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Abdul Mutholib, Osman (2013) Fatigue analysis of similar and dissimilar solid rod welding using friction welding process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Mu’iz, Embong (2017) Study of water quality for rain water harvesting systems on roof material. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Abdul Mu’iz Zulfadli, Ab Wahab (2022) Optimal Power Flow Solution With Stochastic Renewable Energies Using Nature Inspired Algorithm. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang.

Abdul Qadir Jailani, Muchtar (2016) Modelling human queuing at Kuantan cinema. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Abdul Qaiyum, Ramli (2021) Design and development of unmanned surface vehicle hull for water quality monitoring system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Abdul Qayyum, Samsuddin (2017) Effect of crude palm oil (CPO) and changes of temperature towards the asphalt mixture strength. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Abdul Rafiq, Mohamad Yazid (2009) Esterification of oleic acid with etanol by using sulfated zirconia catalyst in the presence of triglycerides : kinetic and modeling study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Rahim, Asas (2010) Optimization of electrical discharge machine on mild steel AISI 1020 by using grey relational analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Rahim, Ayub (2018) Street light malfunction detection system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Abdul Rahim, Mohamed (2012) Investigation of filler material to the corrosion behaviour of aluminium alloys weldment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Rahim, Mohd Yusoff (2009) Antibiotic purification by using IMA adsorbents. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Rahim, Zulkufli Ahmad (2013) Development of neck dummy for head impact (soccer heading) experimental setup. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Rahman, Othman (2010) Investigation of abundant treated sea sand (ATSS) with different percentages in concrete brick making ratio 1:3. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Abdul Rahman, Alimuddin (2019) Study on characteristics of sediment and sedimentation rate in Kenau River for year 2008, 2016 and 2019. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Abdul Rahman, Mohamad (2013) Simulation of mini hydro power based on river configuration at river upstream. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Abdul Rahman, Mohd Sabri (2010) Spray simulation of hydrogen fuel for spark ignition engine using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Rashid, Marjuki (2015) Qualitative assessment of structural strength for thermoformed honeycomb sandwiched structures. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Abdul Rashid, Muhammad (2008) Design and fabricate walkingaided tool for paralyzed people. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Rashid, Muhammad (2012) Effects of tool path strategies on surface roughness in high speed milling. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Abdul Razak, Mohamad Ghazi (2017) Effect of river morphology in Sungai Jemberau at Tasik Chini due to upland activities. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Abdul Wafiy, Kassim (2021) Wideband mimo antenna development for wireless communication. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Abdul Wahab, Abdul Aziz (2012) Tool wear on parallel turning of carbon steel bar. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Zarif, Abdul Malek (2007) Design and fabrication of flexible rack for lecturer use. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Zarif, Abdul Malek (2012) Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Zul Afif, Abd Manap (2008) Removal efficiency of zinc and copper in synthetic wastewater using constructed wetland. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Abdullah, Amira (2010) The effect of vacuum pressure on the flammability limits of hydrogen (H2) enriched liquefied petroleum gas (LPG) in a closed vessel. Faculty of Chemical & Natural Resources Engineering , University Malaysia Pahang.

Abdullah, Huzaifah (2010) The effect of nitrogen dilution and hydrogen enrichment on the explosive limits of liquefied petroleum gas (LPG). Faculty of Chemical and Natural Resources Engineering, University Malaysia Pahang.

Abdullah, Afan Mohammed Salah (2019) The mechanical properties of concrete contains palm oil clinker as coarse aggregate replacement and POFA as cement replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Abdullah, Anuar (2006) The treatment of sugar cane bagasse for subsequent use as substrate for cellulase production by Aspergillus Terreus Suk-1'. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdullah, Ariffin (2008) Portable solar street lamp. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdullah, Muhamad Nawi (2013) Computational analysis of two dimensional flows on a convertible car roof. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdullah, Muhd Asran (2008) Water level in tank using level sensor and PID controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdullah, Nor Anira (2010) Effect of ph and ionic strength on permeate flux during separation of lactobacillus plantarum by using hollow fiber crossflow microfiltration. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdullah Alsakkaf, Ahmed Mohammed (2019) The effects of different properties of limestone on the mechanical properties of adobe. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Abdullah Munzir, Zul Safaruddin (2012) Design and fabricate a flexible toilet hose with spool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdullah Omar, Abdul Aziz (2008) Thickness effect on the performance of composite tube. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdullah Shariffudin, Mohamad (2009) Energy balance study for 4 stroke gasoline engine analyses. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abi Shaiful, Yusuff (2018) UMP vehicle entry system using QR code. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Abid Abbas, Mohamed Arifin (2013) Analysis of propellers for micro hydro power for domestic and comercial loads. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abros Noori, Anvardeen (2008) Room monitoring system using radio frequency (RF) technology and passive infrared sensor (PIR). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abu Bakar, Muhammad Lokman Al-Hakim (2007) Graphical user interface for signal generator. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abu Bakar, Zulkiflli (2012) Determination of selected heavy metal in road dust along Gambang-Kuatan road. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Abu Harfiz, Hassan (2009) Development of control system of automated guided vehicle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abu Hassan, Mohd Nazir (2012) Optimization of bacterial cellulose production in apple juice medium by using response surface methodology (RSM). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Abuluhoom, Waleed Mohamed Mohsen (2019) Comparison study of using different curing condition of tire powder. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Adam, Ismail (2015) The effectiveness of rectangular block as energy dissipation structure. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Adam, Nor Arina (2006) Microcontroller (M68HC11) for fluid flow control. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Adam Mohd Izhan, Noor Azam (2012) A comparison study of liquid and vapor phase development at spray boundary of diesel spray, BDF and SVO spray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adam Zakwan, Zainuddin (2015) Application of drone in visual inspection for construction project. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Adawiyah, Ismail (2008) Isolation, characterization and identification of microorganism from soil contaminated with pesticide. 37, Universiti Malaysia Pahang.

Addam, Annuar (2007) Design and fabrication of cylinder head turn table (rotate 360 degree). Faculty of Mechanical Engineering, University Malaysia Pahang.

Addy Firdaus, Omar (2012) Investigation of mechanical properties of welded aluminium alloys. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adeebah, Jamar (2012) Chemical identification based on spectrogram. Faculty of Electrical and Electronic Engineering, Universiti Malaysia Pahang.

Adezeno, Sagoli Olid (2008) DC motor control using LQR algorithm. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Adi Firdaus, Hat (2009) Dynamics characteristic of connecting rod for four stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adib, Azmi (2013) Fabrication of a test bed for performance testing of Unmanned Aerial Vehicle (UAV) propulsion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adib, Azmi (2013) Fabrication of a test bed for performance testing of Unmanned Aerial Vehicle (UAV) propulsion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adibah, Danh Sapry (2017) Factors hindering the implementation of augmented reality (AR) in Malaysian construction. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Adilah, Abd Rashid (2013) The study of drying parameter of carrageenan using spray dryer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Adilah Nurain, Ahmad (2017) Comparison of watershed boundaries delineation for Kuantan River Basin. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Adlina Farhana, Jamaluddin (2008) The effect of temperature and catalyst concentration of ultrasonic reactor for biodiesel production from waste cooking oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Adnan, Anis Zafirah (2007) Automatic book binding machine. Faculty of Electrical & Elecronic Engineering, Universiti Malaysia Pahang.

Adnor Alhaimi, Adam (2012) Antioxidant Activity Of Ethanolic Extract Of Some Malaysian Herbs. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Advein, Ami (2017) Analysis of construction and demolition waste generation at Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Adzlin, Husin (2014) Extraction of kappa carrageenan from local seaweed. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Adzmil, Abdul Aziz (2013) Analysis of burst pressure on elbow and t-section in the presence of defect. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aeyzarq Muhammad Hadzreel, Mohd Razali (2012) Effects of alignment of reinforcement material to the properties of Polymer Matrix Composite (PMC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Afdila, Aziz (2007) Tensile strength variation of pre-strained aluminium alloy due to annealing. Faculty of Mechanical Engineering, University Malaysia Pahang.

Afham Bazli, Razali (2012) A study of acoustic emission testing on galvanized iron MIG welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Afidatul Husna, Mohamad Syariff (2018) The effect of various position of cilcular hollow section on the strength of foamed concrete beam with processed spent bleaching as partial replacement of cement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Afidatun Najwa, Mohd Sani (2012) Study the impact of coupling agent and fiber length on wood plastic composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Afiefah Hannani, Abdul Halim (2023) Behaviour Analysis Among Adolescents And Children For Cyberbullying Based On Twitter And Kaggle Dataset. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Afifah, Hapidz (2010) Conservation of energy and economic analysis for production of 50000MT/Annum of titanium dioxide plant by using pinch analysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Afifah Nabilah, Mohd Suhaimi (2023) Food Bank Mobile Application (Share Pantry). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Afikah, Abd Rahman @ Othman (2016) The relationship between motivations factors and online shopping participation among student in University Malaysia Pahang. Faculty of Industrial Management, Universiti Malaysia Pahang.

Afiq, Mohamad Nor (2010) Optimization of cost effectiveness for slope stability. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Afiq, Hamdan (2008) Numerical analysis of in-cylinder flow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Afiq, Lamaznun (2012) Network analysis and design at Teruntum Complex. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Afiq Aiman, Mohamad Razak (2010) Design criteria of biofilter system as treatment for domestic wastewater. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Afiq Anwar, Akmal (2022) State Of Charge Estimation Of Battery Management System. College of Engineering, Universiti Malaysia Pahang.

Afiq Danial, Noorzam (2022) Healthcare Information System For Audiology Department (IIUM Hearing & Speech Clinic System). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Afiq Fikri, Hamid (2013) Development of remotely operated underwater vehicle. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Afiq Hafizi, Azizi (2015) Photocatalytic seawater desalination: the effect of metal loading in the hybrid tio2 and the effect of wavelength. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Afiq Ikhwan, Mohd Fauzi (2022) Computer Vision Estimation Of Volume And Weight Of Apple By Using 2d Noncontact Measuring Method. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Afiq Rahimi, Rosmani (2022) Monitoring for uninterruptible power supply (UPS) system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Afiq Zainorul, Zainal (2009) Development of 1st and 2nd order tool life model when machining modified AISI P20 tool steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Afiqah Azeera, Awang Damit (2017) Effect of column size on the seismic capacity of elevated reinforced concrete water tank. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Afiqah Fairuz, Mahmud (2017) The development of rainfall temporal pattern in Klang Valley. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Afiqah Farhana, Zamani (2017) A study on the problems facing by G1 and G2 contractors in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Afnil Danial, Ahmad Meri (2008) Isolation of strach degrading microorganism from local hot spring. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Afyq Rukaini, Mohd Ruzaini (2021) Internet of things solar irrigation system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Afzan, Ahmad (2012) School Fees Payment Accounting Management System. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Ag Ku Afiq Ikhwan, Ag Jaafar (2019) Utilization of oil palm frond (OPF) as a partial replacement of sand in cement sand brick for non-load bearing structure. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Agila, Sivan (2019) Online grocery shopping application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad, Azrulnor (2007) Development of traffic light control system using programmable logic controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad, Saifullah (2008) Dual mode mobile robot : application using matlab GUI. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad, Siti Solehah (2010) Effect of Temperature and Ph on Glucose Production Using Enzymatic Hydrolysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Adli, Jamaludin (2010) Comperative studies of reinforcement concrete beam design using BS 8110 and ACI 318. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Adzhim, Abdull Aziz (2014) Comparison of biodiesel properties produced from moringa oleifera oil and palm oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Afif, Mohd Faudzi (2012) Acquisition of context-based word recognition by reinforcement learning using a recurrent neural network. Department of Electrical and Electronics Engineering, Oita University.

Ahmad Afifi, Ibrahim (2013) Effect of pH and enzyme loading on the protein concentration during collocalia fuciphaga hydrolysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Aiman, Azmi (2011) Design and fabrication of multi touch screen keyboard table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Aiman, Ramlan (2012) Experimental and finite element evaluation of bending for mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Aiman Ariff, Ahmad Zamri (2019) Predicament in construction – an overlook to delays, cost overruns and risks. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Aizad, Jamil (2010) Design and fabricate mini biogas digester. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Aizuddin Faiz, Che Jaafar (2013) A study of the spray characteristic for valve covered orifice diesel nozzle injector using CFD. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Akmal, Wahamid (2010) Development of nonlinear model for plug flow reactor process. Faculty of Chemical Engineering & Natural Resources, Universiti Malaysia Pahang.

Ahmad Al Asfahan, Abdull Rahim (2015) Implementation of project monitoring and controlling in construction in Pahang. Faculty of Industrial Management, Universiti Malaysia Pahang.

Ahmad Alif, Ahmad Adam (2013) Predicting crack pattern on archimedes screw runner blade of micro hydro power. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Alif Sulaiman, Mohd Johari (2021) Fuzzy based mobile robot navigation on motion tracking using ros. Faculty of Electrical And Electronic Engineering Technology, Universiti Malaysia Pahang.

Ahmad Amirhilmi, A. Razak (2013) The Study of Two-Phase Flow for Crude Oil Production Using Computational Fluid Dynamics (CFD). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Amiruddin, Mohammad Shabri (2018) Hyrological modelling using HEC-HMS for Kuantan River Basin. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Amiruddin, Rosdi (2009) Warpage optimization of a name card holder using neural network model. Faculty of Mechanical Engineering, UNIVERSITI MALAYSIA PAHANG.

Ahmad Amiruddin Almukhtar, Kamarudin (2019) An improved segmentation method for lung cancer detection. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad Amirul, Mohd Zaki (2015) Comparison of factor of safety using different method of analysis for slope stability. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Amirul Asraf, Mohd Daud (2014) Palm oil waste gasification: the effect of operating temperature for hydrogen production. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Amjad, Ahmad Daud (2022) Development of vision based automated guided vehicle. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Aqil Safwan, Ahmad Zabidi (2022) Development of multi-legged robot controller with remotely control system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Arif Syazni, Abd Rahman (2008) Software development by integrating the integrated effort flow analysis and boothroyd - DFA. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ahmad Asyraf, Ramli (2010) Theoretical analysis of solar water heating system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Atif, Adzman (2019) Strategies to measure progress and productivity in model-based construction projects. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Atiqurrahman, Hasan (2009) Simulation of heterogeneously catalyzed esterification for the production of biodiesel using reactive distillation column. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Azam Azizan, Azlan (2010) Fatigue crack growth analysis of stainless steel under mode 1. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Azinuddin, Zakaria (2009) Growth optimization of potassium solubilizing bacteria isolated from biofertilizer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Azizul, Khalid (2023) Urban Sprawl Mapping For Beach Tourism Suitability Using GIS-AHP Model In Kuantan District. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Azril, Azmi (2012) Thermodynamic analysis for a six stroke engine for heat recovery. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Azril, Azmi (2012) Thermodynamic analysis for a six stroke engine for heat recovery. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Azwan, Abdul Razak (2016) Solution for instability in magnetizing of toroidial coil winding. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Bakhtiar, Mukhtar (2009) Effect of build orientation on mechanical properties of epoxy resin reinforced coconut fiber. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Bakri, Abdul Aziz (2009) Design and development of vacuum fruit frying machine for SMI and SME application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Basyir, Sadan (2010) Corrosion and mechanical properties study of car steel sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Bazli, Bustary (2010) Fabrication and antimicrobial analysis of composite biodegradable film from pumpkin starch. FACULTY OF CHEMICAL & NATURAL RESOURCES ENGINEERING, Universiti Malaysia Pahang.

Ahmad Bukhari, Abdullah (2015) Breast cancer detector software (BCDS) using case-based reasoning. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Ahmad Bukhari, Abdullah (2014) SLAB reinforced with HDPE pipe (SREHP). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Danial, Abdullah (2012) Mechanical properties of dissimilar aluminum-based alloy joints by mig welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Efendi, Mohamad (2010) Development of buckboost converter for DC motor speed control application. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Faathir, Che Mohd Zulkifli (2017) Building information modelling (BIM) mechanical systems plumbing and HVAC. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Fadhil Hanafi, Abdullah (2014) Production of membrane for co₂/n₂separation effect of diluents extraction time on pp-dpe membrane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Fadli, Zainal Abidin (2010) Analysis of rainfall event and bridge on Galing River. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Fadli, Ahmad Sanusi (2008) Influence of different sintering temperature on mechanical behavior of alumina (AL2O3) reinforced aluminum metal matrix composite (Al MMC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Fadzil, Mohamad (2009) Effects of polarity parameter on the machining of tool steel workpiece using electric discharge machining (EDM). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Fadzli, Ahmad Tarmugi (2009) Development of solar battery indicator. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Ahmad Fadzli, Ahmad Tarmugi (2009) Development of solar battery indicator. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Fadzli, Zakaria (2006) Extraction of gaharu essential oil using spinning band distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Fahimi, Zainal Abidin (2014) The behaviours of lighweight foamed concrete beam with different size of square hollow section. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Fahmy, Jusoh (2010) Flow equations in commercial gas piping system. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Ahmad Fairuz Azri, Abdullah (2018) Experimental study of properties for sand bricks with palm oil clinker as partial replacement for fine aggregate with ratio of 12.5% with rice husk of 10%, 20% and 30%. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Faisal, Hasanuddin (2013) DSPTMS320F2812 based variable frequency power inverter. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Ahmad Faisal, Zulkifli (2014) A study on risk management key performance indicators for developing comprehensive malaysian standard risk management performance level in construction industry. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Ahmad Faiz, Fauzee (2009) Finite element analysis of composite cone under compression test. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Faiz, Ghani (2016) Wireless power transfer with multilevel output voltages. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Ahmad Faiz, Ilyas (2013) Broadcasting real time information using mobile and internet tehcnology on Malaysian super league live score application. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Ahmad Faiz, Nasir (2012) Analysis the performance of signalized intersection by using sidra. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Faizal, Mohamad (2009) Effect of melting temperature on dimensional accuracy in sand casting product. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Faizul, Ali (2017) The effect of waste clay brick as a partial sand replacement on the mechanical properties of concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Fakhirin, Ali (2010) A sustainable drinking water supply from rainwater harvesting by submerge bio-membrane reactor. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Fakhruddin, Ahmad Faudzi (2014) The study of transesterification of palm oil with excessive amount of ethanol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Fakhruzzaman, M Zawawi (2009) Development of three phase induction motor controller. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Farhan, Ahmad Nazri (2016) Pedestrian perception towards signalized crossing. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Farhan, Md. Shokeri (2008) Effect of organic & biofertilizer on the growth of patchouli plant (Pogostemon cablin). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Farhan Hakim, Azmi (2008) Improvement of bus roof section. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Farid, Abu Bakar (2009) Fault detection in three phase induction motor using artificial intelligence. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Faris, Zulkifli (2009) Automatic room temperature control with security system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Fathi, Mohd Zainuddin (2013) Performance of lithium polymer battery on electric propulsion system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Fathiey, Razali (2019) A laboratory study of electrical resistivity and consolidation properties of Kuantan bauxite deposits. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Fatihy, Mohd Subbri (2012) Development of autogrease electric motor’s bearing system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Fauzan, Soberi (2017) Crushed induced liquefaction potential of sandy soils in Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Fauzi, Raffee (2014) A study on bus operation performance and demand sustainability (case study : Kota Kinabalu, Sabah). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Firdaus, Mohd (2012) The effects of process parameters on concentration of dragon fruit juices via freeze concentration technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmad Firdaus, Ahmad Asri (2019) Finite element analysis of square tubular T-joints under static loadings. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Firdaus, Makhtar (2008) Alarm triggered multiple display thermometer using MC68HC11. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Fitri, Zainal Abidin (2009) Endurance limit of aluminum, brass and mild steel on different surface finish owing to cyclic loads. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Hafiz, Zainudin (2008) Development of alternative force converter for electric generator uses. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Hakimi, Abdul Nasir (2013) Development of ammonium perchlorate based solid propellant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Hakimi, Hasnan (2022) Leader follower pattern formation control using ros for mobile robot application. College of Engineering, Universiti Malaysia Pahang.

Ahmad Hamidi, Zulkifle (2013) Decomposition of calcium carbonate in cockle shell. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Haziq, Razali (2014) Foaming behaviour of an aqueous solution of n-methyldiethanolamine (mdea) and aqueous solution of piperazine (pz)-n-methyldiethanolamine (mdea) for the carbon dioxide removal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Haziq, Tarif (2009) Wireless wind energy data transmission system. Faculty of Electrical & Electronic, Universiti Malaysia Pahang.

Ahmad Haziri, Mohamed Amin (2009) Financial management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad Hazury, Hamid (2007) Design and fabrication of stationery rack. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Hazury, Hamid (2010) Design of a mechanism to mix biogas with air in compression internal combustion engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Hisyam, Mohamad (2010) Design and development of portable pineapple peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Hisyam, Suryanto Sugian (2022) Optimized Image Watermarking Based On HD And SVD In IWT Domain. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Ikmal 'Akif, Abdul Khalil (2013) Design and fabrication of smoke piping system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Irfan, Ishak (2021) The development of water monitoring system for IoT-based automatic aquarium. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Izamin, Ali (2010) Heat integration of fractionators for low temperature separation unit (LTSU) and product recovery unit (PRU). Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Ahmad Izzat Asyraf, Yusof (2019) The effectiveness of gabion type retaining wall made of tire buffer to mitigate slope failure. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Izzudin, Abdul Razak (2010) The effectiveness of wasra system on removing groundwater contaminants and its potential as water supply system at sub-urban and rural area. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Ahmad Izzudin, Ismail (2010) Study of shear for steel fibre reinforced concrete(SFRC) with ratio 0.15%, 0.25%, 0.35%, 0.45% and 0.55%. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Junaidy, Jaapar (2008) Extraction of gaharu essential oil using ultrasonic assisted steam distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Juzaili, Alias (2008) An 16-bit fixed-point square root operation using VHDL. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Kamal, Hassan (2009) Effects of transmembrane pressure (TMP) on the performance of ultrafiltration (UF) membrane of soy protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Kamal, Masrur (2008) Microwave assisted extraction of patchouli essential oil using ethanol as solvent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Kamal, Mat Zain (2012) Clinic management system with notification using GSM modem. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad Kamil, Fadir (2009) Wireless wind energy data transmission system. Faculty of Electrical & Electronic , Universiti Malaysia Pahang .

Ahmad Kamil, Miskam (2007) Design and fabrication power window apparatus (bowden cable type). Faculty of Mechanical Engineering, University Malaysia Pahang.

Ahmad Kamil, Fadir (2009) Power quality analysis based on harmonic distortion level in FKEE lab, UMP. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Kamil, Miskam (2010) Effect of surface roughness on fatigue life. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Khaidir, Hamzah (2013) E – prestasi pensyarah (lecturer performance evaluation system). Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Ahmad Khairul Anwar, Samsuddin (2008) The effects of the heating rate on the pyrolysis behavior of empty fruit bunch biomass. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Ahmad Khairul Azhar, Ahmad Kamal (2011) Sustainability approach in modeling and improvement of finger type slug catcher in gas processing plant. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmad Khairul Azwan, Jantan Anua Jah (2008) Development of auto re-closer earth leakage circuit breaker (AR-ELCB). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Khairul Hafizi, Wahab (2009) Effects of punching force on cutting tool in forming process using FEA approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Khusairi, Ayop (2010) Determination of heavy metal concentration in top surface and sub surface soil around Ulu Tualang closed landfill, Temerloh Pahang. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Luqmann, Afandi (2022) Scaling Up TiO2 Anodization Device For Gas-Phase Photocatalysis. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Lutfi, Mohd Yusof (2016) Seismic performance of cantilever retaining wall structure under earthquake loading. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Lutfi Fajri, Zaidan (2017) The properties of concrete containing rejected foamed concrete as partial sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Makhzan, Ahmad Kamal (2010) Modification of existing water turbine system for application at local river. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Mazrul, Kamarudin (2008) Effect of surface treatment on fatigue life of pistion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Muhaimin, Ismail (2012) Design and analysis of wheelchair in term of daily usage. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Muhddin Hidir, Othman (2015) Dual function mouse. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Ahmad Muizz, Ishak (2012) Study of effects of fuel injection pressure on performance for diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Mustakim, Mohd Rusli (2010) Comparison of automatic and CVT transmission for a car under 1 liter engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Muzamir, Mazlan (2006) Tourism information system using geographical information system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad Nahri, Abdul Aziz (2009) Effect of enzyme loading and time on production of sugar from tapioca starch using enzymatic hydrolysis : a statistical approach. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Naquib, Ali (2023) Increasing Productivity With Life Planner Mobile Application Using Ionic Framework. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Nasrullah, Norazaman (2012) Analysis on the behaviour of the transient response in turbocharger diesel engine by using simulation / Ahmad Nasrullah Norazaman. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Nazaruddin, Mat Zin (2008) Design and development of automatic drum deheader. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Nazif Naim, Zali (2015) The use of eggshell as partial sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Nazirul Ariff, A. Majid (2016) Implementation of android versatile drive interface in a vehicle model. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Nazmi, Mohd Rose (2010) Performance of diamond tool in machining titanium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Nur Zakwan, Ahmad Nazari (2013) Machinability study of high thermal conductivity tool steel (HTSC-150 ) in hot press die. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Qusyairi, Ahmad Kamarulzaman (2019) Student attendance system using QR code. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad Rashdan, Mansor (2014) Effect of cement-aggregate ratio and alkaline addition on the mechanical properties of compressed stabilised earth interlocking blocks. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Rasyidi, Abd Razak (2013) Development and implementation of a fuzzy logic controller for a high performance battery charging system using microcontroller. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Ahmad Redzuan, Abdul Razak (2022) High Efficiency Isolated Three Port Dc-Dc Converter For Dc Charger Stations. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Ridhwan, Ahmad Faisal (2019) Study of potential palm acid oil (PAO) from sludge palm oil mill effluent (POME) as goat’s feed. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Ridzuan, Ibrahim (2010) Analysis of connecting rod fracture using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Safiuddin, Ahmad Saudi (2008) Design and development of hamsters cage. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Safuan, Abdul Razak (2010) Luggage record system (LRS). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Ahmad Safuan, Mohamed Ramli (2019) UMP E-Saman by using QR code system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad Safwan, Abdul Halim (2012) The kinetic study of biodiesel production by using two step method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmad Saifuddin, Othman (2016) Prediction of future climate trend using stochastic weather generator. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Salahuddin, Mat Hassan (2015) Study on adaptability culture and project performance in project-based companies. Faculty of Industrial Management, Universiti Malaysia Pahang.

Ahmad Sapuan, Hasan (2008) Design and simulation on the air dam for Proton Pesona by using CFD tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Shafiq, Mohamad (2010) Design,construction and commissioning of microalgae photobioreactor. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmad Shafiq, Hashim (2014) Adsorption of methylene blue from aqueous solution using tea waste in a continuous stirred tank reactor (cstr). Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Shahril Ashraf, Mohamed (2008) Modification of piston skirt design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Shahroom, Mohd Shah (2015) Recycling of nickel oxide from palm oil mill fuel ash (POMFA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Shahrul Amrie, Mohd Supri (2012) The study on the effect of laser power on kerf width for carbon dioxide laser cutting process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Shawal, Mohd Amin (2012) Design and fabrication of pesticide pump sprayer cart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Shazwi, Kamaruzaman (2008) Carbon Dioxide (CO2) laser cut quality of acrylic. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Solihin, Ahmad Syukri (2011) Online fuel consumption cost calculator (OFCCC). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad Sulaiman, Zurkifli (2023) Image Steganography Using Hash Function And Compression. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Syafiq, Shiro (2013) Energy projection analysis of solar energy for water pump system using gridline power with focus on control system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syafiq, Shiro (2009) Small sweep. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syahir, Zainal (2008) Energy management of battery to DC motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syahmi Adli, Shamsuddin (2023) Paralysed Patient Monitoring Kit (Parakit). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Syahmi Aiman, Mohd Zuri (2022) Optimal Planning Of Distributed Generation Considering Time Varying Load. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ahmad Syahmi Azri, Mohmad Anua (2015) Assessment of effect of flood mitigation construction at Perkampungan Sungai Isap, kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Syahrul, Mohamad (2009) Natural gas dehydration using triethylene glycol (TEG). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Syakir, Mohamad (2008) Energy audit for the UMP library and energy efficiency project proposal. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Syauqi, Othman (2009) Study on emulsion stability and chemical demulsification characteristics. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Syauqi, Adnan (2009) Level control (tank 1) of coupled tank liquid level system using integral control state feedback controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Syauqi Fathuddin, Md Shaimi (2012) Study on crack interaction effect of API steel using finite element analysis. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ahmad Syazwan, Mohammad (2012) The effect of compaction pressure and sintering time on mechanical properties of a waste metal powder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syazwan, Ahmad Tarmizi (2013) Bezacube web based application systems. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Ahmad Syazwan, Saiddin (2017) Behaviour of hybrid fibers in reinforced recycled concrete aggregate beam (50% of recycled aggregate). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Syazwan, Yahya (2012) Effect of heat treatment on erosion-corrosion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syukri, Baharudin @ Ismail (2006) Fabrication of polysulfone membrane, the effect of additive polyvynil pyrrolidole (pvp) on membrane flux and rejection. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Taqiyuddin, Mohamad (2019) Smart blinkers speed humps using solar panel. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Ahmad Taufiq, Ayub (2013) Biomechanics and measurement on archery athlete: balancing body posture. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Termizi, Mohd Azmi (2010) Convolution encoder for forward error correction. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Thibraani, Termizi (2007) Home automation using bluetooth technology. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Wafi Zaim, Kharudin (2012) Non revenue water (NRW) Sg. Lembing experienced. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Wafiq Firdaus, Zulkifli (2015) Finite element analysis of steel arch frame using ANSYS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Zaim Solehin, Che Hasan (2011) Modelling and simulation of modified skyhook control for semi-active suspension. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zainul Ariffin, Mohamad (2013) Optimal design of electric bicycle (electric bicycle motor). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Zaki, Che Zainol Ariff (2010) Modal analysis of car disc brake. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zaki, Zaimani (2012) Development hydrogen gas generator for dual fuel engine using yull brown method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zakwan, Zulkefly (2015) Analysis of under-deck cable stayed bridge and combined cable stayed bridge. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Zarir, Mohamad (2007) Human powered LED torches. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Zhafir, Ahmad Wahid (2009) DC AC motors switching controller. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Zubaidi, Abdul Aziz @ Md Rani (2010) Development of microhydro generator system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Zul Hafiz, Ramli (2010) Effect of heat treatment on the corrosion resistance of aluminium alloys. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zulfadhli, Mohd Khalid (2008) Design, analysis and fabricate of low speed water tunnel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zulfadzli, Ahmad Murad (2010) The study on heat distribution inside the combustion chamber of a gas fired pyrolysis system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Zulhelmi, Muhamad (2009) Mold design for plastics injection molding process (two colors) and analysis of gates location. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zulkhairi, Muhamad (2010) Oil palm biomass conversion to bio-oil through direct fired pyrolysis process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmed Al-Hamed, Ahmed Hasan (2019) Effect of recycled aggregate concrete with glass fiber on concrete properties. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmed Alburaiki, Abdulaziz Salem (2019) The effect of different percentages of kenaf on the mechanical properties of adobe. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmed Ashraf, Zaki Mohd (2015) Palm kernel shell as partially replacement of fine aggregates in concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmed Mohammed Gabir, Adham (2018) Study of sand brick properties with partial replacement of rice husk as sand with ratio 10%, 20%, 30%. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmed Nizam, Thulkarunai (2012) Production of conductive polymer using carbon nanotube. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmed Sai’d Sa’deh, Abdullah (2018) Factors implementation of facility management (FM) in Malaysia construction. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ai Wa, Wong Pi calculating based on grid computing. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Aida Azwa, A. Halim (2010) Taguchi approach on surface integrity of titanium in turning operation using tin coated cutting tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aida Azwa, A. Halim (2007) Development of projectile launcher for learning purpose. Faculty of Mechanical Engineering, University Malaysia Pahang,.

Aida Khairani, Ariffin (2018) Exposure assessment of indoor fine particulate matter 2.5 (PM2.5) in bound to heavy metals among shop in urban area of Kuantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Aida Raihana, Abd Wahab (2012) Human diseases diagnosis system (HDDS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Aida Shafina, Shofi (2012) Sound identification in the swiftlet house. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Aida Syamsiah, Mohd Yusof (2012) Investigation of heat treatment on weld joint of steel and aluminum. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aida Zahirah, Zurhaini (2019) The development of intensity duration frequency (IDF) curves in Gombak. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aida Zuraina, Mir Ahmad Talaat (2005) Tourism information system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Aidil Amsyar, Mohd Azamee (2013) Eco home monitoring system. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Aiesyah, Ghazali (2012) Battery level monitoring system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Aiman Hakim, Badarisman (2010) Modelling of high efficiency miniature aerocyclone. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aiman Safwan, Ahmad Suffian (2021) Development of communication system for IoT based solar irrigation system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Aiman Syakir, Sobki (2016) Hand detection for computer graphical user interface control. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Aimi Fadlini, Fauzi (2010) Water treatment using slow sand filter. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Aimi Jehan, Hamzah (2010) The potential of kaolinite as a landfill liner material. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Aimi Nadia, Azmi (2010) Fir filter for makhraj recognition system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Aimi Salma, Awalludin (2009) Scale up of biopolymer (PHB) fermentation from 500Ml shake flasks to 2L stirred tank fermentor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aimi Shakira, Yuseh (2010) Evaluation of filter design and harmonic analysis using PSCAD/EMTDC. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Aimi Zafirah, Abd Rahim (2019) The characterization and antioxidant activity of chitosan-alginate nanoparticles encapsulating cymbopogon citratus and cymbopogon nardus aqueous extracts. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Aimuni Izzati, Mohammad Yatim (2012) Separation of oil and water by using coconut coir. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ain Amira, Abd Rahim (2014) A study on catchment characteristics in Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Ain Art Atiqah, Selamat (2015) The effect of water content and nutrient on soil microbial behaviour. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ain Nadia Nadira, Marafi (2017) The study of indoor air quality at lecture classroom, University Malaysia Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ain Nasuha, Mohd Talib (2014) Behaviour of RC deep beams with web openings at the top of shear span near support. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ain Nur Najwa, Abdul Wahab (2018) Serious game for first aid. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ain Rashida, Abdullah (2016) Application of planning software in construction industries : study on effectiveness of planning software toward project planning. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ain Shahira, Kasmaon (2018) Effective dispersion of graphene nanoplatelets in epoxy grout for structural rehabilitation. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aina Azliyana, Mohamad (2012) Simulation of auto –tuning pid controller for dc motor using Ziegler-Nichols method. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Aina Hazuani, Hazman (2014) Submerged membrane bioreactor for tenun dye wastewater treatment. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aina Nadia Aida, Mohd Latif (2015) Improvement of availability rate of overall equipment effectiveness (OEE) for CNC winding machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Aina Safia, Jeffree (2023) Child Developmental Screening Test & Progress Monitoring System For Little Ones Eduworld Therapy Centre. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Aina Syafiza, Jamalulail (2013) To study and recommend measures to make fkm administration block be more energy efficient. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aina Syuhada, Rosnan (2018) The development of rainfall temporal pattern in Gombak. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Aina Umairah, Mazlan (2018) UMP mosque rental inventory management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ainaa Bisyarah, Mohd Yusoff (2015) The effect of palm oil fuel ash as partial cement replacement material on concrete toward heat generation. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ainaa Farhana, Rosli (2015) Acceptance of an innovation toward performance within construction industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Ainaa Nabila, Md Abd Aziz (2016) The earthquake effect of double storey RC building due to surrounding earthquake in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ainatul Mardiah, Ibrahim (2007) The design of an adaptive tuned vibration absorber. Faculty of Mechanical Engineering, University Malaysia Pahang.

Ainatul Shahirah, Mohd Saru (2012) A study on causes of flood at Sungai Isap and Jalan Tun Ismail, Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Aini Rushda, Md Desa (2012) Effects of cutting tool coating on surface roughness in machining pre-hardened steel (p20). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ainihayati, Ismail (2012) Mathematical modeling of adsorption for wastewater treatment. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ainin Sofia, Azni (2015) Optimisation of phenolic compounds extraction from misai kucing using RSM. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ainin Sofiya, Adnan (2023) Augmented Reality Arabic Application For Preschool. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ainul Afifah, Zakaria (2014) Water level forecasting using artificial neural network in sungai Pahang, Temerloh. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ainul Nadirah, Izaharuddin (2010) Scale up study on production of biodiesel from jatropha crude oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Ainun Jariah, Sansuri (2010) Synthesis and swelling behavior of bentonite based superabsorbent polymer composities. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Ainun Syahirah, Adnan (2019) Enhancing generic code clone detection model for C based application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ainur Nadhirah, Hamsan (2015) The investigation of fire growth pattern from different combustible materials. fFaculty of Engineering Technology, Universiti Malaysia Pahang.

Airina, Zubir (2012) Removal of acrylic acid from process water using continuous adsorption. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Airinah Nazli, Aziz (2016) A study on ethics practices of construction industry in Wilayah Persekutuan. Faculty of Industrial Management, Universiti Malaysia Pahang.

Aishah, Che Mohd (2011) FSKKP final year student-supervisor matchmaking expert system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Aishah, Shahid-Din (2009) Road network modeling of Jalan Tanjung Lumpur-Pekan and federal road 3 using EMME/3. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aisyah Aqilah, Akmal (2019) Investigation on mechanical properties of lightweight aggregate concrete containing coal ASH as partial sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aisyatul Azlin, Sitam (2014) Analyze extreme wind speed in peninsular Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Aiza, Abd Rahman (2013) Kinetic study of acetic acid production from banana stem waste using soil bacteria, Bacillus Thuringiensis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aizad Ayasyi, Ab Ghafar (2007) Experimental evaluation of vortex generator usage to reduce the coefficient of drag of proton saga car. Faculty of Mechanical Engineering, University Malaysia Pahang.

Aizat, Mohd Taib @ Taib (2010) The effectiveness of coconut coir blanket in controlling slope erosion. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Aizat Fahmi, A.Aziz (2009) Induction motor stator resistance eztimation using PI estimator. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Aizuddin, Abdul Rahim (2008) Dynamic modelling and control of mass spring system with large load uncertainty. Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.

Aizuddin, Abdul Malek (2010) A preparation of nitric acid from nitrogen dioxides using photocatalytic method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Akid Afnand, Abdullah (2019) Development of rainfall temporal patern in Universiti Malaysia Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Akmal Hakim, Muhammad Sha'ani (2012) Compressive strength of lightweight foamed concrete using artificial aggregate from palm oil clinker. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Akmalhabibi, Rosli (2013) Condition monitoring of faculty air conditioning system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Al Aidaros, Hussein Ali Hasan (2019) Colour texture image classification using colour completed local binary pattern (CCLBP). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Al Nakheel Narin, Alwakil (2021) Development of prototype of wireless footwork analysis for badminton player. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Al Nazirul, Haron (2010) Design and fabricate multipurpose trolley. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Al-Amri, Mohammed Yahya (2018) The mechanical properties of concrete containing palm oil clinker as fine aggregate replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Al-Hasanol Gumanti, Sudirman (2022) Non-contact Heart Rate Estimation using High Radio Frequency Radar. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Al-Shaquerin, Katman (2012) Performance of IBS lightweight cold-formed steel roof truss. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Alauddin Hafiz, Yusof (2008) Air conditioning study for automotive application / Alauddin Hafiz Yusof. Faculty of Mechanical Engineering), Universiti Malaysia Pahang.

Albert, Roland (2010) Project paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Alexius, An'yan (2008) Effect of grinding process parameters on grinding force of aluminium alloys. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Alexson, Abit (2010) Finite element modeling of cerebral aneurysm. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Alfatihah, Abdullah (2010) Face recognition using neural network. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Alhafizul, Ibnohasim (2022) Development of power supply using solar energy for smart agriculture system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Alhaimi, Nabil Mohammed Ali (2019) Online Yemeni agriculture product shopping system (OYAPSS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ali Zainal-Abidin, Mohamad Termizi (2022) The Mixing Of Solid Waste From Palm Acid Oil (PAO) And Palm Kernel Cake (PKC) As A Source Of Animal Feed (Free Range Chicken). Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ali Zaynal Abidin, Othman (2017) Plastic to fuel : the effect of real plastic wastes composition. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ali Zulfakar, Khairudin (2016) Design and development of drill bit sharpening jig for bench grinder. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Aliaa Diyana, Abdul Hisham (2012) Determination of stevioside and rebaudioside a in Stevia rebaudiana leaves via preparative HPLC. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Alisandra Arieza Fou, Muhd Farid Fou (2012) Surface roughness in lathe boring operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Allen, Lee Wei Kiat (2019) The English language multilingual processing for sentiment analysis in social media by using Python NLTK Text Classification, Miopia and MeaningCloud sentiment analysis techniques. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Allyson, Hilbert (2015) Rainfall runoff simulation using modified SCS-CN and HEC-HMS model in Kuantan watershed. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Almekhlafi, Mohammed Ahmed (2019) The effect of palm oil clinker powder & cockle shell powder as cement replacement to concrete mechanical properties. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Alsaeedi, Yaser Abdulwahab Ali (2018) Behavior of kenaf fiber reinforced recycled aggregate concrete beam. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Alvin Ngieng, Wen Hong (2019) Undrained shear strength of soft clay reinforced with encapsulated polypropylene (PP) column. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Alyaa' 'Izzati, Ibrahim (2016) Analysis of lag time between the rainfall and flooding during december 2014 flood inccident in Pahang River Basin, Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Alzubeer, Mohammed Ahmed Mohammed (2019) Biomethanation of sewage wastewater using ultrasonic membrane anaerobic system (UMAS). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amal Farhah, Hashim (2021) Biomethane Production From Food Waste Mixture By Anaerobic Digestion Reactor. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Amalia Husna, Mohamad Salim (2018) The effectiveness of detention pond in urban area. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amalia Witra, Jailani (2019) Smart garbage monitoring system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Amalina, Roslan (2014) Adsorption of cd(ii), ni(ii) and cu(ii) using activated rock melon shell waste : kinetics and equilibrium. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aman, Ahamad (2013) Fluid structural interface of force excitation on pipeline elbow joint. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Amanina, Nasruddin (2014) Study of rainfall-runoff relationship using hydrological modelling system (HEC-HMS) for Kurau river Basin, Perak. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amar Al-Fatah, Ahmad (2009) CFD simulation of temperature distribution and heat transfer pattern inside C492 combustion furnace. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Amar Hakimi, Bahar (2022) Voltage Instability Analysis For Electrical Power System Using Voltage Stability Index. College of Engineering, Universiti Malaysia Pahang.

Amar Reza, Mohammad Firdaus (2007) Design and fabrication of removable container trolley. Faculty of Mechanical Engineering, University Malaysia Pahang.

Amar Reza, Mohammad Firdaus (2010) Internal surface pipe roughness classification using high frequency acoustic evaluation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amar Safuan, Alyusi (2008) Development of vending machine with prepaid payment method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amaran, Krishnamuthi (2015) Sediment transport modelling around bridge at Sungai Tuiusing 1D quasi unsteady flow HEC-RAS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amarasingam, Selvarajah (2014) Cfd simulation study on the effect of water velocity towards oil leakage from submarine pipelines. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ambikapathi, A. Vishnushama (2010) Improvement of alum & PACL coagulants for the treatment of pulp and paper mill wastewater. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ameey Azleenda, Abd Rahim (2008) Road preference survey for commuting trips from to workplace. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Amelia, Abd Rahman (2019) Model for the evaluation of usability of scientific workflows. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Amelia, Victor Dass (2017) Crushing impact on liquefaction of various sand soil in Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amenuddin, Alias (2014) Restaurant online reservation system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Amer Adel, Shahad (2019) The deciding factors for expatriate purchase of property in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amiera, Saidi (2016) Consequence modelling using ALOHA for estimation of toxic gas dispersion from a chemical plant and evacuation planning in Teluk Kalong Industrial Area. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Amierul Amin, Abdul Aziz (2013) Fabrication of aquaponic gravity flow plantation system for lettuce plant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amilia Yanti, Abdullah (2005) Personal router using LINUX. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Amin Abidin, Buran (2010) Performance of coated and uncoated carbide tools while dry machining aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amin Khairi, Rosli (2013) Automatic temperature control system for aquaponic green house. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amin Khairi, Rosli (2009) Design and fabrication of shoes rack. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amin Luddin, Adnan (2012) Soft Set Theory for Data Reduction. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Aminin Faqih, Mohd Amin (2019) Numerical investigation on steel – concrete composite slabs under blast loading. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aminurrasyid, Abas (2008) USB mug warmer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Amir, Abdullah (2011) Design and analysis of wheelchair according to human factor engineering. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Amir, Azman (2014) BSE enterprise network system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Amir Aizat, Jamil (2015) Rainfall runoff simulation using slop adjusted Curve number in Kuantan river basin. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amir Aliff, Amri (2015) Prediction of flood event by using artificial neural network at Padas River. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amir Asri, Mohd Al Kharid (2012) Design and development of semi automatic canting tool (Electrical). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Amir Asyraf, Mohd Fauzi (2022) Satellite-Based Risk Analysis Mapping For Urban Development In Kuantan District, Pahang. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Amir Fadli, Abu Bakar (2012) A potential of using palm oil solid waste by-product (palm oil clinker and oil palm shell) as partial aggregate replacement. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Amir Farhan, Mohd Rasidi (2022) The Design For An Aerial Monitoring System For Environmental Surveillance Applications. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Amir Firdaus, Basirun (2019) Solar charging system for bluetooth solar grass trimmer. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Amir Ghaffari, Khalid (2008) Analysis of the influence of EDM parameters on surface quality, MRR and EW of WC-CO. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amir Hamzah, Azahar (2007) Design and fabrication of computer table. Faculty of Mechanical Engineering, University Malaysia Pahang.

Amir Hamzah, Azahar (2010) Performance evaluation of FKM central unit air condition system/chilled water system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amir Iskandar, Ariffin (2008) Design and develop auto car jacker power by internal car power. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amir Lukmanhisyam, Haili (2014) Esterification of free fatty acids in simulated waste cooking oil using sulphuric acids as catalyst: pre-treatment of feedstock for biodiesel production. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Amir Muhammad Hafiz, Othman (2022) Machine Learning Malware Detection For Android. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Amir Rahimie, Ridzuan (2012) Adsorption of methylene blue using activated carbon from mixed of palm oil press fibres and empty fruit bunch. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Amir Saifuddin, Amram (2015) Soil properties comparison of lime treated soft clay. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amir Syahmi, Nordin (2013) Effect of different cooling rate on integrated circuit (ic) package. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Amir Yusri, Mohd Yusof (2009) Design and fabrication Al-Quran and book rack for UMP mosque. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amir Zu Shafiq, Ab Hafiz (2018) Effectiveness of tyre chips as alternative material in vertical gabion wall to mitigate slope failure. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amira, Mustapa (2012) A design methodology for a self-oscillating electronic ballast. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Amira Ainna, Alias (2019) Assessment of leaching behavior of laterite soil amended with magnesium rich synthetic gypsum (MRSG). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amira Azura, Jalal (2018) Impact of lateral load on bridge girder. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amira Shafika, Ab Manaf (2015) The impact of human resource management practices on financial performance of Pasdec Corporation in Kuantan. Faculty of Industrial Management, Universiti Malaysia Pahang.

Amirah, Mohd (2012) Sungai Isap secondary school management website. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Amirah, Izam (2009) Characterization of extracted fish oil from eel : effects of process parameters on extraction yield paremetres : a) drying temperature b) solvent different. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Amirah Aainaa, Abdul Jalil (2008) Child monitoring system (CHILD). Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.

Amirah Afiqah, Ahmed (2012) Smart sun tracking with automated cleaning system for PV modules. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Amirah Athirah, Sazali (2016) Substrates effect on structural and optical properties of indium tin oxide (ITO) thin films by sol gel method. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Amiruddin, Ahmad (2007) Car cooling system during parking using blowe. Faculty of Mechanical Engineering, University Malaysia Pahang.

Amirudin, Zulkepli (2022) Frit-based controller tuning of a dc-dc boost converter. College of Engineering, Universiti Malaysia Pahang.

Amirul, Ramlan (2012) Design and analysis of three wheel prototype car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Aizzat, Zamani (2014) Study on solid waste generation, management and analysis in Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amirul Aliff, Jamaludin (2009) Development of MS ISO 9001 : 2008 management system for Automotive Excellence Center (AEC) at University Malaysia Pahang. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Amir, Abd Jamil (2009) Performance simulation of Modenas 110cc 4-stroke motorcycle engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Asyraf, Borhan (2018) Blue water footprint based on industrial activities in Kuantan River Basin. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amirul Azfar, Elias (2012) Optimization and performance analysis of a portable solar cooker system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Edham, Roslee (2012) Synthesis, characterization and catalytic activity of palladium supported on bleaching clay. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Amirul Fazlan, Ramli (2011) Performance of sand cement block under axial load with different eccentricity. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amirul Firdaus, Abu Samah (2021) Motorized wheelbarrow. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Amirul Hafiz, Zexafiza (2021) Development of robotic arm and gripper for unmanned ground vehicle in automotive application. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Amirul Hakim, Kamarazaman (2016) Spindle speed modulation for chatter suppression in machining process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Amirul Hakim, Yusrizal (2018) A study of stormwater runoff quantity and quality monitoring in UMP Gambang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amirul Izwan, Abdullah (2013) Design and fabrication of tandem rear part. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Juwaidy, Omar (2010) Digital modeling evaluation on tidal effect of the Galing River. Faculty of Civil Engineering & Earth Resources , UniversitI Malaysia Pahang .

Amirul Naqiuddin Jamaludin, Jamaludin (2019) Performance of different digital elevation model resolution for the Rompin River Basin. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amirul Shafiq, Khairuddin (2021) Modelling Of Power Converter Wpt System Based On Inductor Current Ripple. College of Engineering, Universiti Malaysia Pahang.

Amirul Shazwan, Omar (2010) Design and manufacture the top head of a diesel furnace. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Syafiq, Ibrahim (2016) Chatter detection on thin wall machining of alluminum alloy under MQL condition. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Amirulhamzah, Zainuddin (2008) Design and manufacture the gearing and burning system for the diesel furnace. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirulnizam, Mohd (2008) Development of brake system model for educational purpose. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ammar, Adzman (2009) Home / lecture hall automation. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ammar, Ismail @ Mukhtar (2009) Finite element method modeling Fukui sheet metal formability test. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ammar Faez, Mohamad Azudin (2018) Security access control system based on Radio Frequency Identification (RFID) and Arduino technologies. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Amminatul Farhayu, Abdul Talib (2008) Biodiesel production via two steps catalyzed process : the study on effect of temperature and catalyst weight percent to the biodiesel yield, FFA content and acid value. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Amnani, Ali (2009) Filter-based fingerprint feature extraction. Faculty of Electrical and Electronic Engineering, Universiti Malaysia Pahang.

Amran, Salleh (2005) Implementing honeypot LAN detection. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Amran, Kaharudin (2008) Design and development of piston-controlled intake port for 4-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amran, Kamarudzaman (2013) Potential solid waste conversion for power generation (with case studies in Pekan and Rompin). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amrina, Abu Bakar (2012) Projection on pavement life time for FR 222 access road to Gambang toll. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amryana, Pohan (2010) Treatment of polluted water (river) by using activated carbon from coir pith. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amy Safrina, Mohd Ali (2009) Real time face detection system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Amy Syahiera, Abdul Malik (2019) Potential of oleochemicals waste to serve as partial sand replacement in concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Anabil, Ubil (2008) Treatment of industrial wastewater using constructed wetland : removal of orthophosphate and ammonia nitrogen. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Anak Jayan, Tito Lamat (2009) Read-one-write-all monitoring synchronization transaction. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Anas, Mohd Naim (2012) Synthesis and characterization of Co/SBA-15 catalysts for Fischer-Tropsch synthesis. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Anas, Shamsudin (2018) Finite element analysis of RC beams strengthened with bamboo fibre reinforced composite plate using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Anas Basri, Musthafa (2013) Experimental and numerical investigation on part thicknesses effects in tailor welded blank process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Anas Basri, Musthafa (2009) Table expansion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Anas Mohammed, Husian Kassim (2014) Use of palm oil clinker as drainage layer in green roof system. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Anas Muzamil, Hamiddin (2009) Design and fabrication of multipurpose container. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Anas Muzamil, Hamiddin (2013) Design of synchronous serial communication to control pitches of angklung. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Anas Muzamil, Hamiddin (2013) Design of synchronous serial communication to control pitches of angklung. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Anbananthan Pillai, Munanday (2022) Facial recognition for human disposition identification. College of Engineering, Universiti Malaysia Pahang.

Andi Razif, Andi Rahim (2015) Kanban food ordering system. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Aneesa Aqeela, Mohd Asha’ari (2016) Guest satisfaction survey on public bus services: a case study in Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aneth Athea, Mat Som (2010) Design and fabricate smart laundry cart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ang, Soon Tat (2007) Development of UMP runabout vehicle (URV) frame. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ang, Chun How (2013) Photocatalysis of glycerol solution. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ang, Liqi (2008) Lathe machine optimum cutting speed for different materials. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ang, Ming Key (2014) Investigating the effect of polymer-surfactant complexes on the flow behaviour in pipelines. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ang, Suzanne (2023) Construction Site Safety Helmet Detection In Mobile Application. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ang, Tzy Guan (2012) Online product selection system of REH Trading. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ang, Veei Zhun (2014) The compatibility of osmitic tecnique and vapour equilibrium technique in establishing suction-water content of soil water characteristics curves. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ang, Xiao Pei (2015) The challenges of managing stakeholders in multiple types of event management projects. Faculty of Industrial Management, Universiti Malaysia Pahang.

Ang, Yeong Leang (2014) Analytical simulation of reinforced concrete beam with openings using ansys software. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ang, Yip Hong (2015) Analysis of squat shear wall with different dimensions and position of opening under different type of static loads. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Angelina, Lawrence (2013) Effects of thickness difference and loading direction on fatigue properties of tailored welded blanks. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ani Syazana, Jasni (2010) Drowsiness detection for car assisted driver system using image processing analysis. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Anis Amira, Abdul Karim (2015) Soil–water characterictic curve (SWCC) for FMC Kaolin. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Anis Ayesha, Noraini (2016) Comparison of soil-water characteristic curve (SWCC) on unburned and burned soil at varying temperature. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Anis Farhana, Abd Razak (2014) Possibility of producing activated carbon from moringa oleifera seeds husks. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Anis Farhana, Mazlan (2019) Seismic design for reinforced concrete hospital building influenced by soil type and grade of concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Anis Farhana, Mohd Roslan (2012) Motor control-speed. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Anis Fatin Nabilah, Abdul Latif (2017) The study of magnesium-doped calcium copper titanate (CaCu3Ti4O12) effect to the microstructural and electrical properties of Ca(Cu3-xMgx)Ti4O12. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Anis Hazwana, Mohamad Wazir (2013) Design of MIDI decoder for auto angklung. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Anis Izzati, Ab Fauzan (2015) Kids edutainment application: islamic pre-school syllabus (KEAIPS). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Anis Sakinah, Lokman Hakim (2014) Ph treatment of pome via biological process – optimization. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Anis Syarliza, Ahmad (2013) Modeling, simulation and experimental verification of hydraulic servo system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Anizan, Wan Ramli (2008) Refrigeration study for domestic application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ann, Lim Jo (2010) Formulation of natural drag-reducing agent from malabar spinach for aqueous liquid flowing in turbulent mode through pipelines. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Ann, Ivy Wong Fui (2014) Modeling and simulation of distillation column. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Annafi, Mohd Khobori (2010) Mold design & surface analysis of casted material. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Annas Robani, Aminudin (2011) Analysis of slope failure at Maran highway using slope/w software. Faculty of Civil & Earth Resources, Universiti Malaysia Pahang.

Anshana Suwanno, Tan (2019) Analysis of method stability of slope failure using slope/w and manual calculation for redesigning failed slope - a case study. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Anthony, Latisha (2012) Modification of nanofiller to improve the final properties of polylactic acid(PLA)nanocomposites. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Anuar, Abd Rahman (2009) Computer control based "Angklung" traditional musical instrument. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Anuar, Mohamed (2022) 2d08 formulation of machine learning model to classify human motion based on kinematics data of daily activities. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang.

Anuarul Ikhwan, Mat Nazri (2009) Analysis and optimization of machining parameters based on different type of thickness in incremental forming process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Anwar Razlan, Rasali (2023) Web Based Malicious URL Detection Through Feature Selection (Special Characters) with Machine Learning. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Aqilah, Yahya (2013) Biodiesel production from moringa oleifera seeds using heterogeneous acid and alkali catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aqwa, Nawi (2015) Biodiesel production from moringa oleifera seeds oil by using MgO as a catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aravinda, Kottasamy (2010) Design and fabrication of laboratory scale micro-hydroturbine test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aravinthan, Rajaandra (2008) Automated guided vehicle application for dispenser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ardian Syah, Mohd Yusof (2008) Command by speech recognition. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Arham Saufi, Mohd. Isa (2007) Active loudspeaker system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Arif Hanafi, Sharif Katullah (2013) Data transmission using aes encryption via email and sms. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Arif Johari, Mat Ali @ Salim (2009) Internal surface pipe roughness classification : an acoustic emissions approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Ariff, Che Mohd Noor (2008) PID control system implementation in embedded system for DC motor speed control. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Ariff Safwan, Radzi (2007) WAP alumni registration system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ariff Syakirin, Ghazalli (2007) Joint solder of lead free solder (Sn0.7Cu) and prrinted circuit board with various heat treatment temperatures. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ariffin, Abdullah (2013) Vibration suppression of flexible beam using electromagnetic shunt damper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Arina, Mazelan (2016) Design of miniature waterjet machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Arina Fatin, Hasan (2018) Effect of earthing material water content on the resistivity and corrosion behaviour of earthing electrode. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aris, Khairul Anuar (2007) Development of motor control using graphical user interface. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Arivahnathan, Pandiyan (2014) Factors affecting the performance of Klang Valley mass rapid transit project-study on improving the project performance. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Arjianah, Aliamat (2012) Study on comparison of bio-cocosand filter and biosand filter for drinking water treatment in rural area. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Arsyad, Fitriyanti (2015) Evaluation of surface roughness and power consumption in machining FCD 450 using coated and uncoated irregular milling tools. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Arumugam, Gayathri (2010) Separation of goat milk to whey protein by cross flow filtration using hollow fibre membrane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Arumugam, Nithiya (2009) Formulation of multipurpose grease from titanium dioxide manufacturing waste (red gypsum). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Arunan, Siwaraju (2010) Design and fabrication of small scale trainer aircraft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Arwena, Abdullah (2006) Development of asynchronous serial data comparator using fpga. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

As Eleyana, Ali (2013) Modelling and environmental assessment of heterogeneous catalysis biodiesel process using war algorithm. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Asdarina, Yahya (2006) Extraction of ascorbic acid from fresh pineapple. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Asfidayu, Abdul Ghani (2012) Sustainable parking management strategy for Sultan Ahmad Shah Mosque, Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ashaari, Ibrahim (2013) The effect of torch distance on weldability of dissimilar welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ashmal Shahira, Ismail (2016) Synthesis and characterization of bio-phenolic glyoxal resins via liquefaction and resinification of empty fruit bunch fibres. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Ashvaany, Egambaram (2008) RFID wireless door system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ashwin Charles, Benedict (2009) Extraction of the essential oil of Aquilaria Malaccensis (gaharu) using hydro-distillation and solvent extraction methods. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ashwinder, Chelliah (2015) Separation of essential oil from mixtures of melissa officinalis and cymbopogan citratus leaves for mosquito repellent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Asma Aida, Amin Hafiz (2017) An overview of pavement maintenance practice by local authority and government agency. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Asma Shufieyah, Zainal Abidin (2009) Adsorption of phenol by activated carbon produced from decanter cake. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Asmadianatasha, Asmanizam (2016) Assessing sustainability in environmental management system for Malaysian industry. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Asmadiyana, Mahadi (2013) Feasibility study on locally isolated strain for butanol production by using oil palm trunk sap. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Asmahani, Abdul Kadir (2009) A numerical study on the effect of gasolie-hydrogen fuel blend on engine power and torque at medium and high engine speed. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Asmak, Mat Daud (2005) Online undergraduate project proposal submission. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Asmalina, Mohamad (2010) Full factorial and experimental investigation on surface integrity of stainless steel in wedm operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Asmerol, Alias (2009) Corrosion protection of steel structure for industrial application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Asong, Angkat (2008) The removal of plumbum and zinc using activated carbon. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Asri Syahmi, Asnor (2019) Contributing factors for successful implementation of erosion and sediment control plan in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Asyran Zarizi, Abdullah (2010) LAN searching system. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Asyuaraa, Sukmarsari (2009) Effect of different enzymes and optimization of cultural conditions on xylose production using response surface methodology (RSM). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Athirah, Zulkfali (2018) The development of fitting constant for intensity duration frequency (IDF) curve in Klang Valley. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Athirah, Zulkifli (2016) The development of isohyet map for Pahang State using Kriging method. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Athirah Fayyadhah, Othman (2009) Data encryption in e-counselling system (DEECS). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Athirah Izzati, Zakaria (2018) Asessment of risk management in government construction project. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Athirah Nur Syaza, Sarbani (2018) Online assessment system for primary school. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Atikah, Mad Nawi (2013) Formulation of Shampoo From Keratin Protein. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Atikah, Selamat (2016) Simulation-based scheduling system at R2 Print Enterprise Kuantan. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Atiqah, Mohd Nor (2019) Serious game in learning English (Grammar race). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Atiqah, Nafsun (2012) Biodiesel from various vegetables and tallow oils. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Atirah Shahira, Mahadi (2019) UPPAAL model for validation of the software development process. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Attirmizi, Zulkifli (2022) Development of Internet of Thing (IoT) system for monitoring ruminant grass growth enviroment in vertical farming system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Attiyah, Ariffin (2010) Production of zeolites from oil palm ash. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Audi, Sha Rizal (2007) Design of a compressed natural gas (CNG) mixer for1500cc engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Audi Munir, Mahmud (2011) Site investigation, sampling and slope stability analysis at kilometer 141 KL-Kuantan highway. Faculty of Civil & Earth Resources, Universiti Malaysia Pahang.

Augustine, Deedre (2023) Axial Load Of Single C-Section Cold Formed Steel With An Opening. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Aui, Shwu Harn (2015) Particle size distribution measurement from different indoor activities. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Auji, Samsudin (2012) Design and fabrication of a single cylinder diesel engine test platform and it's experimental equipment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Auni Hasyilah, Abu Yazid (2022) Effectiveness Of Using Liquid Organic Fertilizer From Oil Palm Empty Fruit Bunch Fiber Waste On Plants Growth. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Auni Zahidah, Mohd Rasol (2022) Gripper configuration and control design on omnidirectional mobile manipulator arm. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Awang, Kamaruzaman (2010) Formaldehyde emission from wood based panels. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Awang Omar Firdaus, Awang Ismail (2009) Production of grease from spent lubricant. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Awis, Ibrahim (2015) A study on decision making in managing maintenance and building services in military organization. Faculty of Industrial Management, Universiti Malaysia Pahang.

Ayesha, Darawin (2012) Recovery of spent IPA by using evaporation process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ayesha, Darawin (2012) Recovery of spent IPA by using evaporation process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ayu Andirah, Sakka (2016) Comparative studies between guidelines and actual practice of safety on site in perspective of PPE. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ayu Annur Fetrah, Yusoff (2012) Microcontroller based Delta Modulated PMW for three phase inverter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ayu Shakira, Shafie (2016) Comparison of different methods in estimating potential evapotranspiration. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ayuni, Mohamad Ali (2015) Pretreatment of forestry residue via torrefaction process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ayuni Athirah, Azman (2013) Effect of ph solution on the water absorbency of superabsorbent polymer composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azah Fadhilah, Ramly (2008) Intake valve flow optimization for single cylinder four stroke petrol engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azham Helmi, Azmi (2023) One-Time Password Authentication System In Website. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Azhar, Yusop (2008) Conceptual design of two-plate injection mould for UMP's keychain. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azhari, Anuar (2010) Biotransformation of phenol using immobilized polyphenol oxidase from banana stem. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Azharuddin, Anuar (2014) Exploration on pedestrian behaviour in Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azhroul, Bah Piyan (2017) The effectiveness of micronized powder and crumb rubbers as fine aggregates replacement in ultra-high performance concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azian, Othman (2013) Investigation on the potential of orange peel waste in the production of useful homemade solution. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aziee Edna Diawati, Hazwan (2013) Modal analysis on different type of aluminium, joined by tig welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aziema, Mohamad Azizi (2008) Effect of grinding process parameters on surface roughness of aluminium alloy 6061-T6. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aziemah, Hashim (2016) Investigating the strength of polystyrene as aggregate replacement to produce ligthweight concrete wall panel. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azila Azura, Juma'at (2010) Biodegradable electrospun fibers for drug delivery application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azim Ashraf, Othman (2016) Simulating river discharge for Selangor River Basin. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azimah, Hazeli (2012) Evaluation of small steel fiber for enhancing reinforced concrete flexural characteristics. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Azira, Yacob (2012) Kindergarden management system for Taska Anakku Comel UMP. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Aziratul Adawiyah, Dulkarim (2019) Utilization of oleo chemical waste as a partial cement replacement in cement brick. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aziz Zaid, Aziz Qannaf (2016) Extraction of carotene from moringa oleifera leaves for cosmetics uses. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azizan, Abdul Aziz (2006) Development of hplc analysis for detection of lycopene in tomato and crude palm oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azizie, Asmawi (2009) Development of remotely operated vehicle (ROV) for underwater exploration. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azizie, Nasir (2009) Design and analysis of polymeric foam spraying machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azizul, Aziz (2011) Assignment box alert for student (ABA). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Azizul Rahman, Abd Aziz (2008) Improvement and optimization of tire nut removal with 114 PCD. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azizun, Asmat (2011) Automated imaging system for determine percentage of broken rice. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Azlan, Ahmad Tajuddin (2017) Solving gate allocation problem (AGAP) using distance-evaluated particle swarm optimization (DEPSO). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Azlan, Mohd Saini (2010) Monitoring tool wear process in turning machine using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azlina, Nordin (2019) Seismic design for reinforced concrete office building influenced by concrete grade and level of seismicity. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azliya, Abd Rahman (2009) Study on the effect of different sizes and the quality of the tiger prawns (Penaeus Monodon) dried using freeze dryer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azma Salwani, Ab Aziz (2012) Optimization of abrasive machining of ductile cast iron using water based SiO2 nanocoolant : a radial basis function. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azmeen Aida, Azizul Hamid (2010) A study of internal lighting comfortability at lecture room. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Azmi Raif Nur, Abd Wahab (2011) Housing loan evaluation system using artificial neural network. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Azmira, Ab Aziz (2015) Comparisons between mix designs towards SF-OPSC mechanical properties. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Azni Yusra, Ahmad Kasmiri (2013) Developments of 2 Inches Loop Pipelines for Paraffin Deposition Testing Facility Using Plant Design Management System (PDMS). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Aznizan, Shaari (2010) Optimization of glucose production from enzymatic hydrolysis of rice straw using response surface methodology. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Azra Shakira, Hassan (2016) Comparison of structural and optical properties of zinc oxide and silver doped zinc oxide thin films at various layers using spin coating technique. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Azree, Mohamad Azizi (2016) The effect of thermoforming temperature and mould vent hole to the thermoplastic container made of 0.5 mm polypropylene (PP) sheet. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Azree, Musa (2007) Wireless laptop alarm system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Azri, Abdullah (2010) CFD simulation of gas-liquid hydrodynamics in aerated stirred tank. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Azri, Marmoh (2013) Optimal design of heat recovery system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azri Amzari, Ramli (2010) Evaluation and optimization of heat extraction device. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azri Nurfathiah, Mustafa (2019) Investigation on the causes and method in minimizing the building defects. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azril Nizam, Muhamad (2008) Minutiae point exraction for skeleton-based fingerprint image. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Azriq Fildza, Anuardi (2010) Design and fabricate multifunction baby stroller. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azrul Ariff, Abdul Halim @ Abdullah (2010) The biopetrol synthesis from palmitic acid-heterogenous catalytic cracking with zeolite catalyst. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Azrul Azam, Nizarudin (2010) Experimental study of heat transfer coefficient of nanofluid flow through a plain tube. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azrul Azmi, Yaziz (2006) Production of bioethanol from biomass waste (sugarcane). Faculty of Chemical & Natural Resources Engineering, Universiti Mlaysia Pahang.

Azrul Hafiz, Awang (2010) Letter recognition using backpropagation algorithm. Faculty of Computer Systems & Software Engineering, University Malaysia Pahang.

Azrulhafiq, Mohd Azizi (2012) Experimental and analytical evaluation of bending for mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azuan, Alias (2007) Modeling and simulation of single phase inverter with PWM using MATLAB/SIMULINK. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Azuan, Ismail (2013) Railroad inspector for railroad department in Malaysia /. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Azura, Ahmad (2009) Solar data logger. Faculty of Electrical & Electronic, Universiti Malaysia Pahang.

Azwan, Airuddin (2016) Study of liquid contact angle in different solid surfaces. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Azwan Bukhari, Asmil (2012) The effect of coconut fibre on concrete properties (workability and flexural strength). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Azyan, Rozlan (2018) The effect of ultra_violet germidical to the removal of pathogens in rainwater harvester. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azyyati, Abd Hamid (2015) Ultrasonic extraction of palm pressed fibre for oil recovery. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azyyati, Johari (2010) Effect of nonsolvent additive on development of polyethersulfone (PES) membrane for 02/N2 separation. Faculty of Chemical and Natural Resources Engineering, Universtiti Malaysia Pahang.

Azza Nurain, Kairallah (2010) The effect of vacuum pressure on the flammability limits of H2 enrichment in natural gas (NG). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Azza Nurshafira, Zul' Azman (2017) Potential impact of bauxite mining activity on water quality at Sungai Penggorak, Kuantan catchment area. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azziatul Khadijah, Ibrahim (2017) Assessment of heavy metal contamination in soil due to landfill leachate and industrial wastewater. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azzura Izzaty, Abu Bakar (2018) Design and fabrication of solar powered membrane distillation system. Faculty of Engineering Technology, Universiti Malaysia Pahang.

A’azimah, Sa’adon Zubir (2016) A simulation study of photovoltaic modelling for DC-DC converter system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

A’dilah Hanum, Azman (2019) Pahang mosques and surau portal. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

B

Baarath, Kunjunni (2016) Implementation of platooning strategy for autonomous mobile robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Badariah, Mohd Nasir (2013) The Effect of Extraction Parameters on Antioxidant Activity of Cosmos Caudatus. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Badihah, Ismail (2016) Intelligent light control system (ILIC). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Badri, Shaharudin (2014) Automated house by using raspberry PI. Faculty Of Computer System And Software Engineering, Universiti Malaysia Pahang.

Badrul Hisyam, Ahmad (2009) Design improvement for power window mechanism-scissor type. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Bagavathi, Krishnan (2012) Investigation of alumina additive in lubricant oil for enhanced engine performance. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Bahrun, Mohd Shakir (2010) Treatment of industrial detergent wastewater via membrane separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Baiyinah, A.Talip (2010) Effect of inoculum concentration on butanol and ethanol production by clostridium acetobutylicum. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Bakhtiar, Ahmad (2009) Switching characteristic and analysis of insulated-gate bipolar transistor (IGBT). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Balachanter, Ramasamy (2010) Investigation on the strength of the recycled asphalt pavement as a base material. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Balan Michael, Erick (2007) Design and development of automatic self balancing scale. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Balkish, Muhammad Ali (2012) The performance of palm oil boiler stones (POBS) and quarry dust as partially sand replacement in mortar. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Balqis, Adam (2013) Development of natural adhesive using lignin and soy protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ban Kiat, Tey (2015) Synthesis of reduced graphene oxide by using palm oil mill effluent (POME). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Bangga, Christabel Melanie (2012) Fabrication and comparison between poymeric membrane with mixed matrix membrane on their prformance for O2/N2 separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Bangit, Grunsin (2008) Study to determine the optimum parameter of the electro discharge machine die sinked 4 litres bottle neck. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Basri, Abdul (2019) Assessement of the projection of the future changes in climate by RCP 2.6, RCP4.5, RCP8.5. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Bastian Wibar, Momang (2013) Design analysis of exterior car body part. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Basyir, Mansor (2010) Hydrological river modeling for Sungai Lembing Area Bukit Kenau using Infoworks RS. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Batumalai, Thilagawathi (2010) Investigation on the usage of allium cepa (onion) as natural corrosion inhibitor in industrial chill wastewater system. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Baxtier Brandon, Juheng (2023) GIS-Based Approach For Mapping Of Oil-Based Pollutant Concentration Along The Sg. Galing, Kuantan. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Bee Tin, Chew (2012) Kinetic evaluation of sewage sludge treatment by membrane anaerobic system (MAS). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Beh, Alicia (2013) Analysis and countermeasure to improve production system performance by using overall equipment effectiveness at bi technologies sdn. Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Benedick Conolius, Gabriel Addris (2016) Current measurement of engine oil with various gap length electrode. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Benedict, Maurice Lojikip (2012) One dimensional simulation of diesel hydrogen dual fuel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Bennedict Bally, Anak Narok (2009) 18V to 1000V boost converter. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Bibi Rubiatul Adawiah, Mustafa Kamal (2012) Simulation on air conditioning using fuzzy logic. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Bindamin, Benjunior (2012) Effect of precipitate hardening treatment on microstructure and mechanical properties of cast aluminum silicon alloy (A356). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Bong, Kit Hian (2014) Finite element analysis of reinforced concrete beam with two circular opening at constant moment area by using ansys software. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Boon, Kar Lih (2023) Predicting Suicidal Ideation Via Social Media. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Brendapal Kaur Thind, Jagdiesh Singh (2018) Health risk assessment of metals bound to the fine particulate matter (PM2.5) at Jalan Mahkota, Kuantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Bryan Andrew, Balasan (2017) Synthesis and characterization of polyvinyl alcoholcerium (III) acetate nanofiber composites of various ratio of [OH-]:[Ce3+]. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Bryan Lester, Binar (2009) Esterification Of Octanoic Acid And Ethanol Using Sulfated Zirconia In The Presence Of Triglycerides: Kinetic And Modelling Study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

C

Cadence Isis, Tay (2012) Characteristics of Biodiesel Produced From Palm Oil via Base Catalyzed Transesterification. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Candra, Menan Nagappan (2015) Finite element modelling analysis on built-up column. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Carl-Ventolinson, Anak Emley (2008) Fabrication of new cylinder head concept model for 4-stroke motorcycle engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Carlos, Enseriban (2022) IoT smart laboratory system using node-red and raspberry PI. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Cecelia, Linggang (2016) Performance of modified sampling technique in reducing disturbance on peat soil sample. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Cek Seng, Koh (2012) Line balancing technique implementation in a small and medium industry. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Cha, Kwan Hung (2010) Development of a tool to design AC harmonic filter for HVDC transmission system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Chai, Yee Toong (2012) Hospital management system on mainframe. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chai, Fook Siang (2009) Design of automatic gate mechanism. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chai, Seng Miao (2014) Study on bioethanol production by using oil palm trunk (opt) sap. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chai, Wei Ching (2014) Interactive user interface for food ordering system using QR code technology. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chai Siew, Li (2013) Employing Psychoacoustic Model for Digital Audio Watermarking. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Chan, Chia Yik (2012) Vehicle tracking and speed estimation system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chan, Seng Chang (2007) Design for serviceability evaluation of car door. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chan, Wai Theng (2007) The effects of fibre volume fraction of composite plate. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chan, Yunn Chyuan (2010) Management front end for cache server. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Chan, Bun Hoo (2014) Natural reduction of graphene oxide to graphene using kaffir lime leaves extract. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chan, Calvin Quok Qeith (2014) Interactive 3D courseware for Spanish language. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chan, Chao Shiung (2016) Design of software code to improve the accuracy of shrimp grading machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chan, Cheow Fah (2014) Study about the sediment load and the bed load pattern at Galing River. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chan, Chia Jing (2015) Risk assesstment of noise exposure in wooden furniture manufacturing industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Chan, Christoper Sing Kong (2013) Energy projection analysis of solar energy for water pump system using gridline power with focus on control system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chan, Hong Lup (2012) Sub-surface constructed wetlands for pesticides removal by using vetiver grasses. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Chan, Hue Wah (2023) Heart Disease Prediction By Using Case Based Reasoning (Cbr). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Chan, Kar Min (2014) Nanostructured pt/mno2 catalysts and their performance for oxygen reduction reaction in air cathode microbial fuel cell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chan, Kien Chong (2017) Finite element analysis (FEA) of RC beams reinforced with natural fiber woven mats by abaqus. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chan, Ming Ting (2014) Certificate authentication system using QR code. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chan, Neol Christopher (2013) Analysis of spindle cooling system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Chan, See Ling (2009) Design and fabricate an automatic fish feeder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chan, Shiao Ting (2016) Evaluation of sewerage inflow and infiltration in residential areas within Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chan, Sooi Tat (2015) Fuzzy logic controlled solar module for driving three-phase induction motor. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chan, Tian Xian (2017) Application of 1-D analytical solution for salt intrusion investigation in the Belat Estuary. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chan, William (2014) Study on extraction and stability of natural red colorant from hibiscus sabdariffa l. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chandran, Surendren (2010) Performance of foamed concrete by using by product material : palm oil clinker crushed (POCC) as sand replacement. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Chandrathevan, Sathiamurthy (2022) Multi-Robot Learning with Bat Algorithm With Mutation (Bam). College of Engineering, Universiti Malaysia Pahang.

Chandrikka, Vasudavan (2014) FSKKP bachelor's degree project title management system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chang, Billy Zhi Yang (2013) Compression in image recovery watermarking using PNG (Portable Network Graphic). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chang, Chun Kit (2011) Design of water bike for UMP Pekan lake. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chang, Jian Fei (2015) Design and development of smart car parking system using arduino and android. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chang, Ling Shing (2015) Mobile patient appoinment and helping system for emergency. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chang, Ting Wai (2014) A study on the implementation of relationship management (supply chain management) in Malaysia construction industry. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chang, Ying Shi (2016) Methane dry reforming over copper and iron substituted strontium cobalt oxide perovskite catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chang, Yong En (2017) Control of wheeled mobile robot in restricted environment. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Changkari, Ravindran (2013) A study on food quality dimensions of 3 in 1 instant packet drink. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Charan Kanwal, Chitra Charan Suri (2012) Biodiesel production from rubber seed oil using activated clinker as catalyst. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Charlene Angela, J. N. Sundraraj (2009) A comparison between the production of biodiesel from waste cooking oil and refined-bleached-deodorized palm oil using ultrasonic transesterification with potassium hydroxide as a catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Charomie, Tat Wi (2010) Implementation of hybrid encryption method using caesar cipher algorithm. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chatterton, Charlene Cassandra (2016) Extracting bioactive compounds from moringa oleifera leaves for anticancer product. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chau, King Hou (2014) Electrophoretic purification of recombinant green fluorescent protein from intact escherichia coli cells in continuous buffer system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Che Abdul Hafiz, Che Yahya (2018) Study on current status of water quality and heavy metals around Tasik Chini. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Che Ahmad Arif, Che Mud (2013) Separation of aromatic from aliphatic by using [EIM][ETSO4] ionic liquid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Che Amir Rajhan, Che Jaffar (2010) Springback prediction of mild steel sheet on L-bending. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Che Amri, Che Azmi (2012) Compressed concrete block using crushed laterite brick as sand substitution. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Che Azral Izzuddin, Che Rudi (2013) Finite element based fatique analysis of aluminium tailor welded blanks. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Che Engku Nuzuwal Ikram, Che Engku Abdullah (2013) Design and development an ergonomic SMED’s external prerparation for small press die at FKP lab /. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Che Fatin Fatiha, Che Man (2017) Study on the impact of mining and agricultural activities on Tasik Chini water quality. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Che Hanisah, Yaacob (2012) Analysis of emulsion fuel spray characteristics using SAC and VCO nozzle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Che Ku Aili Nurfateen, Che Ku Ahmad (2012) Assessing flow accumulation area of Sungai Kuantan watershed using GIS techniques. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Che Ku Mohd Faizul, Che Ku Mohd Salleh (2008) Linear quadratic regulator (LQR) speed control for DC motor using MC68HC11. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Che Ku Mohd Shahidan, Che Ku Mohd Yusof (2015) The risk assessment of roof truss structure in Malaysia due to windstorm. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Che Ku Muhammad Amirul Syafiq, Che Ku Pauzi (2018) Building operation and maintenance in building information modelling (BIM). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Che Ku Muhammad Daniel Aiman, Che Ku Mazlan (2021) Real-time monitoring water quality monitoring system on board USV. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Che Mohd Akhairil Akasyah, Che Anuar (2008) Development of the can crusher machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Che Muhammad Faris, Che Mohd Shamshudin (2015) Mechanical behavior of palm kernal shell concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Che Muhammad Ridhwan, Che Hashim (2012) Design, detail analysis and performance testing of uav propulsion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Che Normadiaa, Ibrahim (2018) Mobile based for inventory system (MBIS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Che Norrizuan, Che Abdul Rahim (2012) Esterification of oleic acid with ethanol catalysed by 12-tungstophosphoric acid supported on alumina. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Che Nurwani, Che Soh (2018) Study on structure defect in commercial building in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Che Rohazli, Che Mazlam (2010) Line tracking robot using vision systems. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Che Wan Nurul Fatihah, Che Wan Fadzal (2009) Simulation computer controlled oven by using fuzzy logic. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Cheah, Jit Choon (2014) Personal financial planning using rule based expert system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Cheah, Kar Jun (2015) Study on the depth reduction of concrete beam using mega mesh polypropylene fibres under flexural load. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Cheah, Siew Hoon (2006) Microcontroller based lift control system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Cheah, Wilfred Seng Wei (2023) Smart Coop Monitoring System For Poultry Farms Based On Internet Of Things. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Cheah, Zong Shen (2014) Life cycle analysis of palm oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Cheang, Chi Qing (2022) Development of ammonia gas leakage detection, precaution and purging system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Cheang, Yee (2016) Strengthening of slab with openings located in the shear zone with CFRP sheets and anchors. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chee, Fang Lit (2017) Development of robot kit for visually impaired. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chee, Sai How (2011) Fabrication of perpetual motion water drinking toy bird. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chee, Xian Yang (2019) Cloud based public bus location tracking and notification application for mobile devices. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chee Heng, Hor (2015) Effect of irradiation of ultraviolet on the quantitation method of enhanced green fluorescent protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chee Wei, Wong (2013) Study on domestic waste water treated using modified rice husk sequences slow sand filter (MRHSSSF). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chen, Chee Lek (2014) Production of mixed-matrix membrane (psf/zeolite) for co2 / n2 separation: screening study of polymer concentration. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chen, Choy Yuen (2009) Productivity improvement for pusat kesihatan pelajar (PKP) by using witness simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chen, Rui (2013) Development of compressed air powered engine system based on subaru ea71 model. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chen Sing, Winnie Lo (2012) Evaluation of effectiveness parameters on gas dehydration plant. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Cheng, Kam Hao (2012) Failure assessment : comparison of the failure mode between OPC mic and fiber mix concrete slab. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Cheng, Wei Quan (2018) Integrated lab door access control (iLDAC). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Cheok, Chin Loong (2012) California Bearing Ratio (CBR) improvement of Kuantan clay subgrade using glass waste as stabilizer. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Cheong, Kee Loan (2007) MC68000 microprocessor development board. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Cheong, Kok Soon (2013) Fiinite element analysis on multi-plane defects of ASTM 106 steel pipe. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Cheong, Yong Jian (2014) Parental control for mobile application. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Cheow, Shek Hong (2017) Development of electronic kit for respiratory for detecting asthma. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Cheow, Yin San (2010) Bio-petrol synthesized from rubber seed oil extracted from rubber seeds through catalytic cracking using montmorillonite. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Chew, Pei Ting (2011) Car management using radio frequency identification (RFID). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chew, Chun Chi (2008) Internal structure change of carbon tool steel after heat treatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chew, Hong Ping (2013) Sinusoidal PWM controller of voltage source inverter for better efficiency of three phase induction motor. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chew, Jun Jian (2012) Comparison of microwave-assisted chemicals in demulsification of water-in-crude oil emulsions. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Chew, Li Mei (2009) Model predictive control on fed-batch penicillin fermentation process. Universiti Malaysia Pahang, Faculty of Chemical & Natural Resources Engineering.

Chew, Mann Yee (2018) Incident investigation tracking system based on process safety management. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Chew, Min Wei (2023) Stock Market Value Prediction Based On Machine Learning Approach. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Chew, Yang (2023) Automated Fertigation System (Web-Based). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Chew Fern, Tan (2012) Characterization, demulsification and transportation of heavy crude oil via oil-in-water (o/w) emulsion. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Chew Sin, Seng (2013) Courseware for Driving Simulation. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Chia, Chee Haw (2010) Smart sign detection robot. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Chia, Khai Tee (2010) Performance of spent bleaching earth as cement replacement in concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Chia, Ming Xuan (2013) Clustering of frequency-based vibration signal for bearing fault detection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chia, Shin Chian (2019) Degradation modelling on the influence of moisture content upon burst capacity of composite repaired pipeline. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chia Meng, Sia (2013) Detection of presence marks in stegocontent. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Chiam, Siew Ting (2016) Design selection of floating brake calliper magnesium hybrid composites. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chiang, Xin Yi (2017) Potential of cellulose tri acetate (CTA) membrane for seawater treatment by forward osmosis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chieng, Tiew Hing (2014) Modelling of reactive distillation column by using mosaic. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chin, Fook Loy (2019) Bio-flotation harvesting of chlorella vulgaris microalgae using jatropha curcas L. protein-oil emulsion. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Chin, Hong Jie (2022) Car Rental System With Rule Based Technique. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Chin, Kah Yean (2014) A study of human computer interaction in arcade game design. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chin, Man Sum (2018) Investigation on the rainfall-runoff relationship for the Rompin river basin. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chin, Pei Qi (2015) Image analysis of non aqueous phase liquid migration in aggregated kaolin. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Chin, Pooi Ling (2012) Knowledge management system of coconut. Faculty of Computer Systems & Software Engineering , Universiti Malaysia Pahang.

Chin, Steny Loong (2015) Evalutaion of thunderstrom hazards within Peninsular Malaysia using geographical information system (GIS). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chin, Sui Yee (2013) Hand gesture based user interface system. Faculty Of Computer System And Software Engineering, Universiti Malaysia Pahang.

Chin, Yan Yee (2019) Monitoring air pollutant index (API) using Aeroqual AQM 65 @ UMP, Kuala Pahang, Pekan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chin Hui, Ong (2012) RFID marathon timing system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chin Ming, Lee (2013) Web based integrated food ordering system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chin Weng, Foo (2013) Membrane Application in the Recovery of Gaharu Active Marker Compound from Water Mixture. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Chin Yong, Tan (2005) Registration and billing system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ching, Ng Choon (2013) Rough set based clustering for finding relevant document /. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ching, Mah Yoke (2013) Serious game for internal medical practice (crowd simulation). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ching, Wai Hoong (2012) Development of straight line robot movement. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Ching Liang, Cho (2010) Mechanical properties of steel in aqueous corrosion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chong, Jason Nao Chen (2010) Identification of machine parameters in induction motor drive. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Chong, Pei Shan (2010) Finite element prediction of the axial load test on the profiled composite panel. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Chong, Beng Wei (2019) Finite element analysis on the effect of hollow section on the strength of foamed concrete beam. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chong, Chee Keong (2017) Hot cold tumbler. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Chong, Ee Rong (2014) Characterization of the ethanol-triglyceride transesterification reaction under counter current flow system. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chong, Jia Xin (2022) IoT integrated antenna rotator. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Chong, Jian Dong (2014) Router remote monitoring using android application. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chong, Kelvin Chee An (2009) Simulation of heterogeneosly catalysed esterification for biodiesel production using reactive distillation column. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chong, Khang Zen (2018) Simulation study on behaviour of reinforced concrete beam with various sizing and shape of opening in shear zone. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chong, Li Ping (2019) Development of electrocoagulation cell by using different types of electrode materials to treat restaurant wastewater. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Chong, Michael Ka Wai (2013) PSM / PTA evaluation web management system. Faculty Of Computer System And Software Engineering, Universiti Malaysia Pahang.

Chong, Poi San (2018) Extraction of river networks from digital elevation model for the Rompin river basin. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chong, Soo Kee (2014) A study into the roles of cu/tio2 photocatalysts in the of methylene blue photodecomposition and water photo-splitting. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chong, Soo Ling (2015) Fabrication of glucose sensor using graphene. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chong, Soon Woei (2012) Emergency beacon for elderly. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Chong, Tat Ming (2019) Delineation of the Rompin River Basin and network using various GIS applications. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chong, Wen Khai (2015) Experimental study on the behaviour of reinforced concrete deep beams with large circular openings strengthened using CFRP. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Chong, Yew Puay (2015) The influence of the big five personality traits in team selection for construction project. Faculty of Industrial Management, Universiti Malaysia Pahang.

Choo, Ling Qian (2010) The effects of environmental factors on the corrosion rate of TGIC-free polyester coated mild steel. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Choo, Chee Hua (2016) Surface modification using EDM wire cut method: a feasibility study. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Choo, Xin Ying (2014) Performance analysis of voip network between KK3 & KK5 Universiti Malaysia Pahang using opnet simulator. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Choo, Yong Han (2023) Detection Of Distributed Denial-Of-Service (Ddos) Attack With Hyperparameter Tuning Based On Machine Learning Approach. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Choong, Wai Kit (2015) Mechanical behaviour of concrete added with bamboo fibre. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Choong Hooi, Goh (2011) Network based E-learning system for secondary school. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Choy Chok, Hong (2013) Information retrieval using LUCENE. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Christben, Jimmy (2014) The mechanical properties of oil palm shell (OPS) lightweight aggregate concrete containing palm oil clinker as a partial sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Christine, Wong (2016) Mechanical properties of concrete incorporating porcelain granite tiles as partial aggregate. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chua, Celin Wan Jin (2023) 2d Game-Based Awareness Of Child Abduction For Public : Found You. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Chua, Kok Yong (2014) Modelling and simulation of multiple-resistance conductive heat transfer phenomena. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chua, Meng Fei (2018) E-leave management system and payroll. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chua, Pei Shan (2014) An investigation on compressive strength of cement mortar with seashell powder additive. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chua, Poh Wee (2010) Online optical shop management system. Faculty Computer System & Software Engineering, Universiti Malaysia Pahang.

Chua, Share Kung (2008) Monitoring the quality of essential oil from etilingera SP.4 (Zingiberaceae) by gas chromatography-mass spectrometry (GC-MS). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chua, Xiao Ying (2019) Improving green IT assessment tool using case-based reasoning technique. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chua, Yee Leong (2013) Productivity improvement in SME industry through new plant layout design by using witness software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chua, Zhen Yang (2017) A study on spent coffee ground as cement admixtures. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chuah, Pei Jin (2018) Healthy lifestyle application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chuan, Wei Kiat (2014) The graph heuristic with great deluge algorithm to solve the ITC2007 examination timetabling problem. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chuen, Teh Yung (2013) Dynamic timetable generator using particle swarm optimization (PSO) method. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chui, Hong Leng (2018) External strengthening of RC beams using Gigantochloa Levis (Buluh Beting) fiber reinforced composite plate. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chui Teng, Chan (2012) Simulation of identifying shortest path walkway in library by using ant colony optimization. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chun Ling, Lu (2012) Job agent management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chung, Jia Jiunn (2010) Finite element analysis of corrugated web beam with openings. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Cornelia, Chin Siew Ling (2012) Isolation and purification of pinellic acid from Pinellia Ternata. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Costello Fifo, Nyuwus (2015) A case study to investigate the wind load factor that possibly cause the failure of roof Stadium, Kuala Terengganu. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Crispin, Julip Jainul (2009) The effect of chatter on cutting tool in CNC milling machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

D

Daelami, Aminuddin (2008) Design and fabricate test rig structure for an automotive turbocharger testing apparatus. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Daelami, Aminuddin (2012) Development of mini micro injection moulding machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Daeng Mohd Ashik, Bachok (2012) Dye removal by thin film composite (TFC) membrane produced through interfacial polymerization technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Dahlan, Hishahmuddin (2007) Development of computer integrated manufacturing (CIM) frameworks at UMP FKM laboratory. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Dahrul Akma, Mohd Sabri (2007) Design and fabrication of shear test rig for sandwich cores. Faculty of Mechanical Engineering, University Malaysia Pahang.

Danial Adib, Kamaruddin (2019) Abandoned project through the medium of unfavourable economic condition in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Dany Ak, Dominic Neng (2010) Cubic interpolated pseudo particle (CIP) - Lattice Boltzmann scheme for the simulation of lid-driven cavity flow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Darayani, Musa (2018) Virtual congkak. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Darlene, Mohamad Douglas (2008) Home automation system using power line communication. Faculty of Electrical & Electronics Engineering , Universiti Malaysia Pahang.

Dashiny, Gopal (2009) Oil recovery from palm oil solid wastes. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

David, A/L Joseph @ Dave (2008) The effect of ph and biomass concentration on lead (Pb) adsorption by Aspergillus niger from simulated waste water. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dayang Khairunnisa, Abang Kiprawi (2012) Biomechanical loading of instep kick for malaysian footballer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Dayang Rafika Atiqah, Abang Othman (2009) Preliminary study on biohydrogen production from oleochemical waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dayangku Siti Nur Baizura, Awangku Matali (2013) A study of the characteristics of thunderstorm. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Debbie Cynthia, Clarence Botiti (2015) A study to investigate the cause of failure and collapse of UMNO Tower Penang. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Deirdre, James Damu (2010) The study of interchangeability of liquefied natural gas (LNG) with other fuels. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Desmond Chong Shin, Koh (2012) Transport scheduling system in SUK Pahang using heuristic method. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Devamekalai, Nagasundaram (2014) Megaseek engine (MSE). Faculty Of Computer System And Software Engineering, Universiti Malaysia Pahang.

Devandran, Krisnan (2012) Development of fuzzy controller to control vehicle temperature. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Devarajan, Rajasegaran (2022) Digital filtering optimization on noisy human speech in assistive listening system. College of Engineering, Universiti Malaysia Pahang.

Deveshwaran, Arumugam (2023) My Health Safety Environment Using Web Responsive (MyHSE). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Dewi Haryani, Sulaiman (2008) Extraction of patchouli oil using steam distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dexter, Zick Donny (2010) Liquid-liquid equilibria for methanol-methyl oleate-water-oleic acid system. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Dhanakumar, Suppiah (2008) Extraction of lemon oil from citrus limon peels via ultrasonic assisted extraction. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dheng Siew, Keah (2012) Meal electronic payment system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Dhevindran, Ravi (2022) Range finder measurement system using ultrasonic waves. College of Engineering, Universiti Malaysia Pahang.

Dhilen, Manimaran (2022) Robotic hand controlled based on flexible sensor by glove using wireless communication. College of Engineering, Universiti Malaysia Pahang.

Dhinesh, Ramotharan (2015) Unmanned aerial vehicle with night vision for tracking intruder. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Dhivya Lakshmi, Mohana Sundram (2014) A cfd simulation study on the effect of volume ratio on pressure piling. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dhiyatul Ridhwan, Md Nasarudin (2013) Potential evaluation oil palm frond juice for bioethanol fermentation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Diana, Madi (2009) Treatment of municipal wastewater using constructed wetland : removal of orthophosphate and ammonia nitrogen. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Diana Erika, Phillip (2013) Evaluation of plasticity of Kuantan clayey soil stabilized by rcycle and reuse material mixed with lime. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Dick Carlos, Phillip (2014) Comprehensive strength and flexural strength of oil palm shell lighweight aggregate concrete containing crushed cockle shell as partial sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Dilaeleyana, Abu Bakar Sidik (2010) Comparison of microwave-assisted hydrodistillation with the conventional hydrodistillation method in extraction of essential oil. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Dilah, Kadir (2008) Scale up of biopolymer from shake flask to 20l stirred tank fermenter. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dina Diyana, Rastam Tan (2013) A system dynamic approach in human resource planning in oil and gas industry. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Dineshkumar, Gunasagaran (2014) Use of multi-walled carbon nanotubes (mwcnts) in medium density fiberboard to increase the fire retardancy. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ding, Yong Jie (2018) Durability study of concrete with partial replacement of cement with fly ash and eggshell powder. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Dinie, Muhammad (2008) Fault detection using neural network. Faculty of Chemical & Natural Resources Engineering , University Malaysia Pahang.

Dinie Amni, Mahamud (2017) Earthquake resistance and structural performance of steel warehouse under Acheh and El Centro excitation. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Dinish, Thegaraju (2012) Investigation of biodiesel fuel properties with the dispersion of carbon nanotubes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Dinnish, A/L Thegaraju (2008) Design and fabricate a reer wheel drive differential simulation rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Diyana, Ghazali (2010) A study of corrosion to the carbon steel in the present of carbon dioxide. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Dominic, Tiong Sie Huo (2019) Effect of reinforcement to the square hollow section on the strength of foamed concrete beam. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Dominick, Gira (2015) Ethanol dry reforming over Ce-promoted NI/AI203 catalyst for H2. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Donny, Anak Ju (2009) Two wheels mobile robot control using linear quadratic regulator and pole placement controller. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Donny, Gasah (2008) Synthesis and characterization of Cu/Ni-zeolites -A for the direct conversion of methane to liquid hydrocarbon. Facutly of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dulfharah, Nizam Memth Ali (2009) Effect of nozzle diameter on jet impingement cooling system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Dushendran, Bala Krisnain (2015) Analysis on the effect of different bracing types and layouts on lateral drift of 30-storey steel framed building subjected to lateral forces using ANSYS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Dzul Helmi, Arifin (2014) Static analysis of sophisticated cable arrangement on pedestrian bridge. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

E

E, Soon Shen (2016) Formulation and characterization of water-in-diesel emulsion as environmental friendly fuel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Eddy, Misrum (2010) Self healing concrete crack by using pulverized fuel ash (PFA) as cement replacement material. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Eddy Ahmadi Azizi, Sukimin (2007) Design and fabrication of can crasher. Faculty of Mechanical Engineering, University Malaysia Pahang.

Edward Entalai, Besi (2014) Heavy metals uptake in closed-recirculating water system for phytoremediation : a study towards aquaponic as biosensor tool for environmental biotechnology. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Edwin Hanjiang, Chan (2012) Design of a working model hovercraft. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Edwind, Liaw Yee Kang (2016) Image based autonomous indoor parallel parking assist on omni-directional vehicle (ODV). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Edzamila, Dzaidi (2013) Development of once per revolution sensor chatter. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ee, Jun Jiang (2014) Particle swarm optimization to solve the ITC2007 examination timetabling problem. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Ee Shuang, Lau (2012) Implementation of 7 QC tools by using Kaizen approach for SME manufacturing industry. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Effa Syarmiza, Saharudin (2015) Finite element analysis on the flexural behaviour of internally pre-stressed i-beam. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Effizul Syafrin, Abu Bakar (2008) Labview PID speed controller for DC motor. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Eh Chan, Sakila Sabriani (2010) The effect of waste wash water on concrete properties. Sabriani. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Einayah, Kamaruzaman (2010) Effect of temperature on butanol and ethanol production from palm oil mill effluents by clostidium acetobutylicum. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Elexanderio Julit, Iling (2013) Development of wireless ignition system (WISys) for solid rocket motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Elfira, Anuar (2014) Ultrasonic enzymatic mediated extraction of eurycoma longifolia (tongkat ali) for cosmeceutical and nutraceutical applications. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Elie Sem, Semilin (2009) Investigation and modelling prediction on surface roughness of titanium in dry turning operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Elizabeth, Hendroff (2015) Production of fuel grade bio oil and fuel gas from catalytic plastic pyrolysis : effect of temperature. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ellie Fazlin, Mohd Sarian (2010) Effect of substrate concentration and agitation rate on butanol production from POME by Clostridium beijerinckii. Faculty of Chemical Engineering & Natural Resources, Universiti Malaysia Pahang .

Elliza, Marcellus (2015) A study to investigate the cause of failure of pedestrian bridge Pasir Gudang, Johor. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Elya Shaffiqa, Anuar (2022) Bioelectricity Generation From A Mixture Of Palm Oil Mill Effluent And Wet Palm Oil Sludge In Microbial Fuel Cell By Using Copper As An Electrode. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ema Farima, Rustam Ali Khan (2012) Making an eco friendly board by using lignin- soy based natural adhesive. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Emi Rahayu, Mat Noor (2008) Flood detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Emilia, Adzmi (2012) Lecture timetabling using heuristic technique. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Emir Izwandy, Dzulkafli (2010) Effect of aging on machinability of 6061 aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Emirul Ridzwan, Nor Azmi (2018) A-star (A*) algorithm implementation for robotics path planning navigation. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Emma, Suali (2006) Extraction and analysis of safranal and crocin in pure saffron (crocus sativus). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Emmery, Dayang Dirk (2019) Removal heavy metals from industrial wastewater using activated carbon from coconut coir. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Emy Syafinas, Hamid @ Osman (2006) Protein fractionation using ultrafiltration system for differents module configurations. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Emyra Ezzaty, Masiren (2013) Effect of Additive on Asymmetric Polyvinylidene Flouride Membrane for CO2/N2 Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

En, Tan Kang (2013) Interactive mathematics game using kinect. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Engku Amalina Syazana, Ku Mohd Nazri (2008) Effect of weight percentage of silicon carbide (SiC) reinforcement particles on mechanical behavior of aluminum metal matrix composite (Al MMC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Engku Ersyad, Engku Abas (2013) Design and fabrication of ankle-foot orthoses through 3D scanning and rapid prototyping. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Engku Izyan Munirah, Engku Afandi (2010) Performance analysis on the influent of front tyres movement to the steering wheel system for steady and ride road conditions. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Engku Mohd Amri, Engku Ariff (2007) Autonomous lighting and security system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Engku Muhammad Syuhada, Raja Omar (2012) Food court ordering system using mobile application (fooCOSUMA). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Engku Nadia, Engku Mat Nasir (2014) Solid phase transformation of carbamazepine-succinic co-crystal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Enidran, Loganathan (2018) Development of propolis powder for encapsulation via freeze drying method : purification and freeze drying process of extracted propolis. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Enti Nashila, Riazuddin (2012) Input shaping and PID controller for rotary crane. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Eramamnazruasyadi, Mat Rajab (2010) Optimal of mixed refrigerant composition for mrc-lng system. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Eric Jason, Stanley (2019) Mechanical properties of concrete cubes using tyre waste as partial sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Erma Suryati Sabariah, Md Ali (2014) Bending behaviour of timber beams strengthened with glass fibre reinforced polymer (GFRP). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Erna Qurratu' Aini, Ruslan (2011) Study on extraction of pandan flavor from pandan leaves using steam distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ernie Zayani, Kamaruzaman (2015) Biological production of methanol by using pectin methylesterase (PME). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Eugene Hien Yoong, Ng (2013) Dynamic Simulation of Bulk Polymerisation of Styrene Using ODE Solver Within Matlab Software. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Ezani, Zahari (2010) A new non regenerative gas absorbant catalyst for FCC unit. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ezree Farhan, Abu Hanipah (2017) Composite zinc-fly ash coating on mild steel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ezrin Tasnim, Abdul Ghani (2010) Pineapple distribution classification using RGB and fuzzy. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ezza Izzyana, Mohd Nor (2014) Reward system and its impact on employee motivation : a case study of a Malaysia service company (PUSPAKOM SDN. BHD). Faculty of Industrial Management, Universiti Malaysia Pahang.

Ezzad, Ezani (2012) Study on pool combustion of tire wasted fuel, plastic fuel and diesel fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ezzad, Ezani (2012) Study on pool combustion of tire wasted fuel, plastic fuel and diesel fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ezzah Naziha, Roslim (2022) Covariance Inflation Method In Ros Based Mobile Robot Navigation. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

F

Fa, Fu Win (2016) Plastic to fuel : effect of catalyst support for nickel catalst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Faaris Assyifa, Radi (2014) Analysis of the factors influencing the career choice of undergraduate UMP students using analytical hierarchy process (AHP). Faculty of Industrial Management, Universiti Malaysia Pahang.

Faatihah, Mohamad Asri (2014) Studies on pretreatment and biosugars recovery from oil palm frond juice. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fadhilah, Ahmad (2014) A study on the relationship between morale of employees and project performance in the consrtuction industry in Kedah. Faculty of Industrial Management, Universiti Malaysia Pahang.

Fadhilah Hanim, Redzuan (2018) Water absorption and sorptivity of normal strength oil palm shell concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fadilah, Mohamed (2010) Synthesis of bacterial cellulose by Acetobacter Xylinum sp. using watermelon rind waste for biocomposite application. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Fadli, Mislan@Mishadi (2013) Comparison study of corrosion measurement technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fadzeli, Hashim (1998) Pengujian parameter pemacu pembesar suara gegelung bergerak. Fakulti Kejuruteraan Elektrik, Universiti Teknologi Malaysia.

Fadzhila, Sabri (2011) Decision support system for dental clinic. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Fadzilah, Abdul Latif (2013) Humic acid removal by polyester nanofiltaration (NF) membrane synthesized from triethanolamine (TEOA) monomer. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Fadzlan Nisha, Muhamad Nasharudin (2012) Analysis of control methods for boost DC-DC converter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Faezah, Bakar (2013) Modelling and simulation of fermentation product purification using batch distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Faidzarizal, Idris (2012) Faculty of system computer and software engineering asset management using RFID. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Faiq Nur, Abdul Halim (2007) The effect of water-side scale formation to heat transfer process and boiler efficiency. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fairul Idzwan, Mohd (2008) Comparison of agarwood essential oil & water soluble (hydrosol). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fairul Idzwan, Mohd Rosni (2010) Finite element analysis of lumbar spine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fairuz, Idris (2013) To study the multi-objective optimization of EDM using genetic algorithm. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Fairuz, Rosni (2012) Continuous hydrogen production with anaerobic palm oil mill effluent (POME) sludge immobilized synthetic polymer. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Faiz, Mohd Zabri (2008) Computer based instrumentation system for temperature measurement using RTD in matlab application. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Faiz Aswad, Ayop Azmi (2012) Design and analysis of wheelchair for usage of handicap people. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Faiz Asyraf, Roslan (2008) Comparison studies of machinability for aluminium, mild steel and heat treated mild steel. Faculty Mechanical Engineering, Universiti Malaysia Pahang.

Faiz Misuari, Mohamad Ali (2012) Inventory management and payment system using RFID as a medium. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Faizal Nazareth, Ibrahim (2008) Controller performance of P,PI and neral network control in vinyl acetate monomer process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Faizal Zamri, Zainal Abidin (2007) Predicting of tool wear on machining parameters using design of experiment (DOE) methodology. Faculty of Mechanical Engineering, Umversiti Malaysia Pahang.

Faizarul Akmal, Jamaludin (2008) Roll forming simulation for automotive bumper fixing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fakharuddin, Azhar (2011) A smart metering for energy management system via GSM-SMS based protocol. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Fakhirah, Ahmad Basri (2014) Stripper simulation for co2 removal from natural gas processing plant using amine absorption process. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fakhri Fadullilah, Sulaiman (2013) Fabrication of Medium Density Fibre Board From Oil Palm Frond Using Waste Low Density Polyethylene (LDPE) Composites as Possible Partial Replacement For Binder. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Fakhriah Hanun, Mohamed Shah (2019) Study of sand brick ratio 1:6 for partial replacement of sand with palm oil clinker (7.5%, 12.5% and 17.5%). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fakhrul Hakimi, Saidi (2012) Secure text transfer via bluetooth using hybrid encryption. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Fakhrul Razi, Rosli (2014) Risk management process impacted to the project performance in oil and gas industry at Kuala Lumpur. Faculty of Industrial Management, Universiti Malaysia Pahang.

Fakhrur Razi, Bahrin (2009) Prediction of surface roughness in turning operation of low carbon steel AISI 1018. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fakhrurrazi, Ab Karim (2013) Experimental and finite element evaluation of bending for galvanized iron. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fan, Chin Yet (2015) Heat optimization in internal curing process of geopolymer mortar by using steel dust. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fang, Liew Siew (2015) Determination of optimum moisture content for aggregation of S300 kaolin. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fanurul Kemp, Abd Hakim (2013) Causes of delay in Malaysian IT projects. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Fara Farhana, Abdul Basek (2010) Design and development of orange peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Faradila, Rahmatan (2009) Fingerprint recognition using morphological image processing. Faculty of Electrical and Electronic Engineering, Universiti Malaysia Pahang.

Faradila, Rozali (2008) The formulation of emulsions in biodiesel production : emulsion stability and demulsification via micromave heating. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Faradilla, Mod Yatim (2010) Solar ventilation fan. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Farah, Abdullah (2011) Online diet planning system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Farah Amira, Adnan (2019) Absorption and strengh of concrete containing of woodblock as partially coarse aggregates. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Farah Amira, Mohd Ghazali (2013) The effects of recycled polypropylene mixing ratio on the tensile strength of polypropylene. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Farah Aqila, Tun Riduan (2017) Effect of storey height on seismic performance of elevated reinforced concrete water tank. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Farah Aqilah, Mustafa (2017) Performance of red seaweed for azo dye removal : acid yellow 17. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Farah Fadhilah, Fahrur Razi (2014) Bioethanol production by baker's yeast in opts - effect of temperature and ph. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Farah Fatihah, Mohd Azhari (2013) A Simulation Study on Model Predictive Control Application for Depropanizer Using Aspen Hysys. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Farah Fazira, Kamaruzaman (2015) Fabrication & properties of aluminium-silicon carbide (A1/SiC) composite material. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Farah Hafidzah, Ahmad (2013) Antioxidant Activity and Total Phenolic Content of Benincasa Hispida Fruit Extracts From Various Extraction Solvents. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Farah Liyana, Hassan (2013) Lead time reduction in SME by using value stream mapping (VSM) technique. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Farah Nadia, Mahfudz (2017) Measurement of contact angle of silicone glue droplet on Cu surface in MEMS Microphone Package. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Farah Norhazrina, Rosli (2012) Estimating time travelling for flood from upstream to downstream using Muskingum method : Sungai Kuantan, Pahang Darul Makmur. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Farah Syahirah, Yahya (2015) Development of operator training simulator using aspen simulation workbook (ASW): a reactor case study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Farah Zafirah, Mod Ma'asum (2015) Effect of palm oil fuel ash pofa)with limestone as a partial cement replacement material towards compressive strength and corrosion resistance. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Farahani, Sarajuddin (2015) Hydrogen production via glycerol dry reforming over nickel catalyst supported on sio2 and Al2O3 modified by La. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Farashaheeda, Ahmad Jani (2018) Seismic design for reinforced concrete hospital building influenced by level of peak ground acceleration and class of ductility. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fareez Farhan, Suliman (2012) Welding fault detection using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Farghaly, Alaa Taiseer (2018) A study on green IT awareness among UMP students. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Farhan, Ab Razak (2010) Cost reduction study of automotive part using DFA method headlamp. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Farhana, Abdul Halim (2010) Design analysis of unbraced frame using ANSYS. Faculty Of Civil Engineering And Earth Resources , Universiti Mâlaysiä Pähang .

Farhana, Abdul Samad (2011) Cybercafe system using client-server application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Farhana, Hasbullah (2009) Permeability and selectivity study of polysulfone membrane for gas separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Farhana, Zaimustafa (2022) Production Of Biogas By Using Air Stripping As Pre-Treatment Process In Anaerobic Digestion Of Palm Oil Mill Effluent (POME). Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Farhanah, Amanulla Khan (2013) Fermentative Production of Butanol From Oil Palm Trunk (OPT) Sap Using Clostridium Acetobutylicum and Clostridium Beijerinckii. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Farhani, Faisal (2009) Protein purification using zeolite adsorbent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Farhanis Amirah, Ismail (2018) Strength of soft clay reinforced with 16mm crushed coconut shell column. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Farid Izamer, Azizan (2017) Study on maintenance management practice of telecommunication tower through strategic planning in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Farid Ridwan, Abdull Hadi (2012) Intership management system. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Farida Hamimi, Ismasafie (2019) Investigation on the impact of speed humps towards travel delays in rural roads. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Faridah, Mohd Nor (2013) A comparative study on the effect of clay loading under normal and auto thermal extrusion to the morphology structure and thermal stability of nylon 6 nanocomposites. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fariha Najwa, Azahar (2023) Peat Soil As Natural Adsorbent To Reduce Ammonium In Palm Oil Mill Effluent (POME). Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Faris, Suffian (2009) Experimental study of the heat affected zone (HAZ) and surface roughness on laser beam cutting (LBC) on acrylic sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Faris Imadi, Ahmad Nadzri (2016) Design and development of sedimentation measurement device for magnetorheological fluid. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Faris Syafiq, Zakaria (2010) Design and fabricate of secured LCD remote control holder in UMP Pekan lecture room. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Farisah, Abdul Aziz (2010) Biodegradation behavior of bacterial cellulose fiber reinforces with starch/chitosan biocomposite. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Farizah, Hamid (2010) Production of polyhydroxybutyrate (PHB) from bacillus cereus by using sawdust as a substrate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Farra Alia, Rosli (2023) Stock Inventory Management System (RMSys). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Farra Herliena, Md Zin (2022) Investigation Of Traffic Sign Image Classification For Self Driving Car. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Farra Intan Syamira, Zulkifli (2019) Analysis of water profile at the Bukit Kuang bridge, Kemaman. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Farzana, Dusuki (2019) Design and development of innovative ceiling fan cleaner. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Faseha, Jamali (2010) Simulation of biodiesel production through heterogeneously catalysed transesterification of vegetable oil by calcium ethoxide. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fasya Rafiqa, Saice (2019) Infrared based technology to determine strength of concrete. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Fathiah Sakinah, Zainol Abidin (2014) Trip regeneration at shopping complex and applied development of transportation facilities. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fathin, Idros (2013) Supply chain decision making in chemical industries using Analytical Hierarchy Process (AHP) a palm oil industry case study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fathin Nur Ammalina, Norhasim (2018) Finite element analysis of office building steel structure by using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fathul Naim, Abdul Jamil (2008) Relationship between failure mechanisms with PCBN tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fatihah Hayati, Abdul Sani (2010) Qualitative and quantitative analysis of natural colorants from banana bracts. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatimah, Daing Jamil (2022) Fitness function determination of uav anomaly detection in large data set via pso. College of Engineering, Universiti Malaysia Pahang.

Fatimah Azzahra, Misebah (2012) Effect of inoculums concentration, temperature and agitation rate on solvent production from palm oil mill effluent (POME) by Clostridium Beijerinckii ATCC 51743. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Fatimah Hanim, Khairudin (2015) Study of reduce, reuse and recycle techniques in sustainable construction waste management. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fatin Adnin, Mohamad Prim Nasir (2013) Sediment concentration and size at Galing River, Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Ajeerah, Mad Din (2015) Influence of elevated temperature on physical properties and compressive strength of concrete containing laterite as partial fine aggregate replacement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fatin Atiqah, Rasdin (2019) Effective bracing system for telecommunication towers. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Azureen, Zulkurnain (2014) Effect of temperature on kinetics of bulk polymerization of methyl acrylate. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Fazlinda, Hamzah (2016) A study on the factor effecting project delay in the housing construction. Faculty of Industrial Management, Universiti Malaysia Pahang.

Fatin Izzati, Sulaiman (2017) Risk management in construction industry. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Melinna, Abd Jalil (2014) The optimum condition to enhance degradation of organic matter in palm oil mill effluent (pome) using bio media bioreactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Nabihah, Suhaime (2017) Truss bridge movement and displacement analysis for different types of earthquake loadings. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fatin Nabila, Abllah (2019) Assessment of the best representative concentration pathways (RCPs) for northern Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Nabilah, Mender (2015) Stabilizaton of clayey soil using polyethylene and polypropylene. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fatin Nadhirah, Mahazan (2013) Formulation, characterization, and optimation of emulsion fuel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Nadia, Pauzi (2015) Adsorption of methylene blue from aquoues solution by using imprata cylindrica waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Nadiah, Abd Hamid (2012) Production and Characterization of Bamboo Fibre Reinforced PVC Composites. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Nadiah, Kamarudin (2016) The eartquake effect of single storey RC building structure due to surrounding earthquake in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Naimah, Ismail (2014) The effect of plywood thickness on the profiled steel sheeting dry board (PSSDB) floor panel stiffness. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Najibah, Raduan (2012) Delivery Notification System Using Web Based. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Fatin Naqiya, Roslan (2018) Estimation of long term streamflow generation for Sungai Yap with climate adaptation. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Nur Afifah, Che Hazahar (2019) Mobile danger info system (MDIS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Fatin Nur Amni, Aminuddin (2015) The effect of plywood thickness on profile steel sheeting dry board (PSSDB) floor panel with foam concrete in-fill. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fatin Nur Haziqah, Abd Razak (2018) Adverse effect of shrimp pond farming effluent to the water quality of Pekan river. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Fatin Nurjannah, Salauddin (2018) A multidimensional data descriptor tool based on fuzzy min max neural network algorithm. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Fatin Roziana, Misran (2009) Development of high performance low-pass filter for anti-sway control of a gantry crane system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Fatin Sufina, Abdul Rashid (2013) Analysis of wind effect on the canopy structure. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Syazwana, Hashim (2014) Implementing of ahs for process monitoring evaluation system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Umiayu, Nasaruddin (2016) Rehabilitation support system using shapetapeTM sensor. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Fatin Zulaika, Hasan (2016) Effect on EMG signal from upper limb muscle during conscious and subconscious perception. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Fatin Zulaikha, Mohd Hatanan (2016) The effect of sheet thickness to formability using hyperform. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Fatin ‘Atikah, Abd. Manan (2013) Exploring of the transesterification of castor oil to produce biodiesel using quicklime as a basic catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Fatinah, Abdul Ghani (2012) DC motor controlled based on microcontroller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Fatinnurhazwani, Zainal (2013) Effect of Ultrasound on Enzymatic Extraction of Zingiber Officinale. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Fauzan Hanisah, Zulhaimi (2016) Prediction of water stream flow in the context of climate change. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fauziah, Hairan (2008) Treatment of POME via chitosan based flocculation : a study on the degree of deacetylation of chitosan. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Fauziah Shaheen, Sheh Rahman (2010) Biodegradable biocomposite starch based films blended with chitosan and whey protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fauzurrahman, Zulkepli (2012) Study on effect of crushed tile as coarse aggreagate replacement in concrete. Faculty of Civil Engineering, Universiti Malaysia Pahang.

Fazerah, Moen (2015) Effect of rotation speed and temperature to wax deposition for Malaysian crude oil. Project Paper (Bachelors of Chemical Engineering) -- Universiti Malaysia Pahang – 2015, Universiti Malaysia Pahang.

Fazliana, Fauzun (2010) Design and development of 1-seated urban car chassis using aluminium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fazlin, Masra (2014) Production of polysaccharides from white mushrooms (pleurotus florida) by submerged culture fermentation (scf). Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fazlina, Mansor (2010) Designing and evaluating of jig for holding cylindrical parts for mass production for drilling operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Faznurfariza, Firdaus@Nicholas (2012) Extraction of glycolic acid from natural sources. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Fazreeny, Adnan (2013) Car rental management sytem with SMS alert. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Fazrul Amar, Ishak (2008) Development on pre-heating system for autothermal reformer for fuel cell application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Feng, Cheng (2013) Comparison of design experiment in carbon dioxide (co2) corrosion prediction. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Fidelia Sawai, anak Michael Mulok (2009) Protein purification by using immobilized metal ion affinity (IMA) adsorbent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fifdil, Majiwan (2005) Timetable scheduling using rule-based technique. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Filzah ‪Lina, Mohd Safeiee (2015) Football speed analysis and game analysis by using image processing. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Fiona, Gasing (2015) Evaluation of wind hazard over Sabah And Sarawak. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Firas, Fadzil (2010) Using arbitration as a method for disputes resolution in Malaysia’s construction industry. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Firdaus, Muhamad (2012) Development of solar oven incorporating thermal energy storage application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Firdaus Haikal, Ramli (2012) Design of single cylinder variable compression ratio 4-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fitri Yanti, Sukirman (2010) Study of the effects of Limnocharis Flava (yellow velvetleaf) on wastewater quality from oil palm production. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Flamino Doril, Zepher (2012) UMP library Wi-Fi access control system (ULWACS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Florina, Geduin (2008) Up-scale study on ultrasonically assisted of biodiesel production from waste cooking oil (WCO). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fong, Khai Yeh (2012) Finite element analysis of end-plate connection under seismic loading. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fong, Kong Hing (2013) Self-cleaning solar cell module with sun tracking using microcontroller for battery charger. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Fong, Woan Shiuan (2013) Causes and effects of abuses in a feasibility study : a study in malaysian construction industry. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Fong Fong, Kiew (2015) Copper removal using ion exchanger flat sheet mixed matrix membrane : effect of polyethersulfone composition on membrane properties. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fong Ling, Tan (2014) Evaluation of effectiveness parameters on gas dehydration plant (simulation). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Foo, Chee Yew (2010) Hybrid membranes for separate hydrogen sulfide(H2S) gas from refinery wastewater treatment. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Foo, Jia Huoy (2014) Synthesis of biolubricant by esterification of oleic acid and pelargonic acid with trimethylolpropane over tin(ii) oxide. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Foo, Voon Hong (2019) Nitrogen removal efficiency in slaughterhouse wastewater by using upflow microaerobic sludge reactor. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fook, Wei Jian (2017) Weather station analysis using microcontroller and internet of things (IOT). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Foong, Jek (2010) Staff management and fingerprint login module of shop management system. Faculty of Systems Computer & Software Engineering, Universiti Malaysia Pahang.

Foong, Lee Sai (2013) Texture recognition by using artificial neural network. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Foong, Kah Kah (2008) Formulation of chicks feed based on palm kernel cake (PKC). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Foong, Kevin Wei Pin (2014) School interaction system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Foong, Kin Hong (2022) Music Recommender System Using Machine Learning Content-Based Filtering Technique. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Foong, Yuen Kei (2016) Study on reinforced concrete beams strengthened externally using mengkuang leaves-epoxy composite plate. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fua, Wai Loon (2010) Fatigue life and crack growth analysis of keyhole specimen. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fyroz Ziffa, Mohd Mustafa Kamal (2008) Simulation of electromechanical valve drive on single cylinder four stroke free piston diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

G

Gaase, Poarasy (2010) Isolation of albumin protein from goat�s milk using anion exchange chromatography. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Gan, Kiat Yong (2007) The importance of industrial engineering in small & medium industries :a time study in manufacturing industry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Gan, Gek Hian (2015) Performance analysis of a downdraft and fluidized bed biomass gasification using thermodynamic equilibrium model. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Gan, Kar Hou (2022) Mobile Savings Application With Gamification (Msag). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Gan, Shang Wei (2018) Effect of epoxy resin as partial cement replacement on compressive strength and tensile strength with the fixed proportion of silica sand as partial sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Gan, Sin Yi (2008) Mathematical modeling to predict surface roughness in milling process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Gan, Wei Kang (2016) Design selection of brake disc hybrid aluminium matrix composites reinforced with micro and nano particulates. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Gan, Wei Teng (2017) Preparation and characterisation of MgO nanoparticle incorporated bioresin using palm oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Gan, Zun Jia (2018) Statistical analysis of factors affecting monoclonal antibody production by using principal component analysis : molecular markers. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Ganaesan, Tevadasin (2009) The development of switched-mode power supply for DC motor application. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ganeshmorthy, Sekaran (2014) Amberlite ir 120 cation excharger mixed matrix membrane for iron removal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Gapar, Francis Giang (2011) Design and develop robotic arm for automated guided conveyor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Gary Royston, George (2010) Temperature based DC motor speed control. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Geetha, Muniandy (2010) An investigation of microstructure and mechanical properties of malleable cast iron using metal casting process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

George, Enelda Christy (2017) Factors influencing first-time house buyers in Tuaran. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Geraldine Chan, Sue Ching (2013) Study on the effect of clay loading under normal and auto-thermal extrusion to the morphology structure and thermal properties of nylon 6 nanocomposites. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Gindalan, Emma Olga Taimin (2010) Newton loop method in gas pipeline network. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Go Bee, Chew (2013) Wastewater Treatment by Continuous Stirred Tank Reactor (CSTR). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Gobinath, Raman (2010) Design of a lift reduction device for passenger car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Goh, Tok Mun (2012) Film behaviour of natural rubber latex treated with banana skin. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Goh, Chin Guan (2015) Design and implementation of an automatic coin sorting and counting machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Goh, Ghee Hau (2015) PSAT : a pairwise test data generation tool based on simulated annealing algorithm. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Goh, Jee Ren (2018) Stability analysis and improvement evaluation on residual soil slope with reinforcement load : building cracked & slope failure. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Goh, Ke Pei (2016) Screening parameters on the biological active compounds of coffee bean mixed with nigella sativa. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Goh, Mei Fong (2008) Scale up the biopolymer (PHB) fermentation from shake flasks to 10l stirred tank fermenter. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Goh, Mei Kei (2023) Environmental Sustainability Game For Elementary School Students (Green Genie). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Goh, Ming Hui (2013) Dynamics analysis of 3 axis gantry type multipurpose CNC machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Goh, Swee Tian (2012) Home alarm monitoring network. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Goh, Wen Sen (2014) Visualization mobile employee attendance system with near field communication (NFC) technology. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Goh Mun, Chun (2013) Study on Optimum Condition of Empty Fruit Bunch-Graft-Poly (Acrylamide) Superabsorbent Polymer Composites. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Gopi, Vesuvapateran (2013) Durability of concrete containing laterite aggregate as partial coarse aggregate replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Govindasamy, Inba Malar (2012) Improving the water flow in pipelines using floating technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Gow, Moh Kee (2007) Autonomous robot. Faculty Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Guanning, Xu (2014) The evaluation of traffic operation based on travel time study. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Guat, Si Jie (2018) Autonomous smart robot surveillance system (ASRSS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Gunasegaran, Krishnan (2005) Car plate detection system. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Gwee Xian, Fu (2013) Ultrasonic Extraction of Anthocyanins From Clitoria Ternatea Flowers Using Response Surface Methodology. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

H

Habsah, Yusof (1997) Rekabentuk pembesar suara talian penghantaran (transmission-line/labyrinth). Fakulti Pendidikan, Universiti Teknologi Malaysia.

Hadi Afifi, Sulaiman (2023) Biosorption Of Copper Using Immobilised Eucheuma Cottonii Sp.Biomass Using One-Factor-At-Time (OFAT). Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Hadi Al-Hamed, Hashem Talal (2019) Effects of shear reinforcement to reinforced concrete beam behaviour. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hadianatun Saadiah, Jasni (2013) Design and fabrication of printer table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hafezatul Rasyidah, Othman (2010) Wind environment evaluation on major town of Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Hafidz Arif, Osman (2013) Water quality index of Sungai Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hafierul Hafiz, Md Razi (2008) Simulation test of automotive intake valve using computer aided engineering software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hafifi Hafiz, Hassan (2014) Eggshell as an additive in concrete mix. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hafiz Ashrawi, Baharun (2019) The effectiveness of tires chips in gabion wall for slope protection. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hafiz Hakimie, Mat Tahir (2022) Investigation Of Standard Test Condition Requirement In Establishing Reliable Current-Voltage Characterization System For Dye –Sensitized Solar Cell (Dssc) As An Alternative For Commercial Solar Simulator And Photovoltaic Measurement System. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Hafiz Kamal, Leang (2012) Data clustering using maximum dependency of attributes and its application to cluster agricultural products. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hafiz Naim, Mahazan (2018) Yes job (Web site for job opportunities between job seekers and employers using MVC). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hafiz Osman, Mohammad (2017) The properties of concrete containing coconut shell as part of coarse aggregate replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hafizah Dalilah, Mohamad Zin (2015) An evaluation of hospitality industry's efficiency using data envelopment analysis (DEA). Faculty of Industrial Management, Universiti Malaysia Pahang.

Hafizuddin, Mohamad Shafiee (2016) Hardness and flexural properties of heat treated SKD61 medium carbon steel. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Hafnizar, Muhamad Shaharuddin (2008) Simulation of four stroke free piston diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Haidil Hazha, Husaini (2007) Development of axis movement controller for 2-axis configuration machine control. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Haikal Ikmal, Rahimee (2018) Compressive strength of rubberized-ultra high performance concrete with different elevated temperature. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hairul Ishyam, Hussein (2010) Determination of heavy metal concentration in surface and sub surface soil around Ulu Tualang newly-closed Landfill, Temerloh, Pahang. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hairulazam, Hairuldin (2006) Car lock indicator. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Haitham Mohammed, Ali Al-Abee (2013) In situ Transesterification of Biodiesel For Possible Biodiesel Production. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Hajar, Abdullah (2012) Lean production system knowledge improvement by implementing lean production system simulation game at WSA Engineering Sdn Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Hajar Athirah, Mohd Sukri (2013) Reduction of Cd(II), Ag(II) AND Cu(II) Using Rubber Seed Shell : Adsorption Isotherm and Kinetics. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Hajjar, Husein (2016) A Study on water quality of Galing River,Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Halim, Ayub (2005) RPC/DCOM exploits detection and notification. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Halim Zakaria, Othman (2009) Stability of a two wheels mobile robot using robust control. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Halimatul Syahida, Mohamad Sanusi (2012) Reuse of sewage treatment plant effluent and domestic wastewater as a sustainable alternative water supply for landscape irrigation using drip irrigation system. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Haliza, Mohd Jeffery Ong (2010) Effect of recycled aggregate from concrete waste on concrete compressive strength. Faculty of Civil Engineering and Earth Resources, University Malaysia Pahang.

Hamdansyah, Hamzah (2014) Investigation on feasibility of producing biodiesel from moringa oleifera seeds. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hamdi Abdullah, Mohammed Mudhsh (2013) Design and analysis of piping system for an open channel flume’s flow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hamdya Farhana, Mohidin Yahya (2012) Synthesis, structure determination and characterization of novel organometallic chromium hexacarbonyl derivatives via ligand (L) substitution /. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Hamidah, Jusoh (2013) Simulation of the ceramic ball formation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hamim, Sovester (2017) Seismic performance of reinforced concrete school in Sabah. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Haminuddin, Nurul Izzatul Ain (2008) Microcontroller based battery charger. Faculty of Electrical & Electronic Engineering, Univeirsiti Malaysia Pahang.

Hamizah, Jasmi (2010) Determination of direction factor, Md for MS1553:2002 wind loading for building structure. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Hamizatun, Mohd Fazi (2013) Correlation study of the strain and vibration signals of a beam. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hamzanee, Mat Jusoh (2008) Software development by integrating the integrated using axiomatic design-lucas design for assembly (DFA). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Han Jie, Chan (2015) Synthesis and characterization of EFB clinker supported nickel and cobalt catalysts for methane dry reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hana Fatiha, Hadzri (2023) Withme Alarm App. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Hani Syairah, Azman (2008) Resource planning electronic board for agriculture industry application model. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

HaniShazwani, Mohd Suhaimi (2012) Study on adsorption parameter to remove zinc from spent ipa using activated carbon. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hanif, Kasmani (2011) Flame propagation in spark ignition engine combustion process using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hanifan, Abd Jalil (2013) Catalytic water oxidation of wastewater containing acetic acid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hanis Athirah, Roslan (2019) Effect of soil type and level of seismicity on seismic design of reinforced concrete school building. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hanis Farzana, Mohd Sadek (2010) Comparison of microwave-assissted hydrodistillation with the conventional hydrodistillation method in the extraction of essential oil. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hanisah, Hamid (2010) RFID based systematic student's attendance management system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Hanisah, Harun (2013) Corrosion performance of concrete using palm oil fuel ash (POFA) as a cement replacement material. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hanna, Mustafa (2013) Thermal simulation of laser surface processing for hot forming die surface hardening. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Har, Lai Yee (2016) Crystal growth of ZnO bar using joule heating. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Hardinnawirda, Kahar (2012) The effect of rice husks as filler in polymer matrix composites. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Harisuddin, Idris (2009) Influence of ethanol fuel in engine emision. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Harith Iskandar, Mohd Din (2010) Wireless charger. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Hariz Sufiyan, Mohamed Sunari (2012) Investigation of machining performance of the PVD coated tungsten carbide by sandblasting pre-treatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Harn Jean, Goh (2014) The impact of cultural intelligence on negotiation outcome. Faculty of Industrial Management, Universiti Malaysia Pahang.

Harna, Elavarasu (2010) Arc flash analysis study in industry. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Harrison Yan, Rolland Duat (2014) Causes of time delay in construction Sarawak, Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Harrydass, Ellapan (2016) CO2 reforming of methane over Zr-promoted Ni/SBA-15 catalyst : effect of zirconium loading. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hartini, Hamzah (2012) Study of hybrid induction heating in distillation process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Harvent Rau, Mogana Ravu (2019) Android based smart security systems using internet of things (IoT) and firebase. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hasan, Muda (2009) Effects of electrical discharge machining (EDM) jet flushing setting on the machining of tool steel workpiece. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasan, Zainal Abidin (2013) Vibration suppression of flexible beam using eddy current damper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasbullah, Mat Isa (2007) Design and fabrication of rear car spoiler for Proton Wira model. Faculty of Mechanical Engineering, University Malaysia Pahang.

Hasbullah, Ishak (2009) Experimental study on strength of spot welded. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasbullah, Mat Isa (2010) Productivity improvement via simulation method (Manufacturing industry). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasbullah Ali, Abd Rahim (2014) Properties of compress stabilised laterite interlocking block using recycled fine aggregate. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Hasdilazira, Abd Latif (2005) Bus management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hasfazri, Abdul Rahman (2012) Cylinder by cylinder engine modeling of single cylinder 4 stroke engine for control system development. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hashim, Ahmad (2010) Soil CBR improvement by fly ash with relation to pavement thickness, case study in Lepar Hilir, Kuantan. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Hashima Abu, Hasan (2014) Hybrid coagulation ultrafiltration for tenun dye waste water treatment. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hashimah, Mohd Hadzri (2017) Properties of modified bitumen in hot mix asphalt using crumb rubber. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hasif, Rosazanam (2011) Application of probabilistic analysis in finite element modelling of two dimensional truss. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Hasimah, Razak (2005) Web usage mining using kuktem e-community application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Haslan, Mohd Yong (2010) Monitoring catastrophic failure event in milling process using acoustic emission. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasli Azilla, Hamzah (2014) The impact of communication approach towards stakeholder management in construction industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Haslindah, Jaafar (2014) The effect of screw spacing to the stiffness of profiled steel sheeting dry board (PSSDB) floor panel. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hasmida, Noordin (2015) Analysis of hybrid arch and cable-stayed bridge. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Hasmira, Abd Sahatar (2017) Study of sand brick ratio 1:3 for partial replacement of sand with palm kernel shells (0%, 5% and 15%). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hasrol Nizam, Md. Hasan (2008) Software development by integrating the integrated value engineering (VE) and boothroyd design for assembly(DFA. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasrul Azmi, Said (2008) Immobilization of lipase from Candida Rugosa on chitosan beads for transesterification reaction. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hasrul Harfizal, Mohd Zait (2011) Laboratory management system (LMS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hasrul Reeza, Mustaffa (2010) Facial motion recognition using camera application for movement of mouse (I-sight mouse). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Hassan, Ahmad (2019) Dental clinic management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hassan, Hishamudin (2012) The accuracy of micro-core compressive test to predict the strength of concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Hassan, Zuria Zaidura (2006) Automated guided vehicle (AGV) using 68HC11 microcontroller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Hassanal, Haris (2012) The study of mass and heat transfer on shell and tube heat exchanger. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hasyima, Idris (2015) The impact on-the-job (OTJ) training towards employees performance in manufacturing company at Seremban, Negeri Sembilan. Faculty of Industrial Management, Universiti Malaysia Pahang.

Hau, Ong Boon (2010) Thermodynamic analysis of absorption refrigeration system (ARS). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Hazan Idayu, Abdul Halim (2012) Computational analysis of heat conduction in nanowood composite boards. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazer, Mohamad Sayuti (2008) Temperature controlled NiCd battery charger. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang .

Haziatun, Mohd Fazi (2012) Biodelignification of oil palm trunk- optimization. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hazim Adly Harun, Harun (2015) Case study on delay factors in steel bridge construction. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hazimah, Abdul Rahim (2015) Modelling and simulation of flexible production line for coil winding assembly. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Haziq Irfan, Hamdan (2021) Turbine design effect to the speed of turbine and output voltage of the Pico-Hydropower generator system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Haziq Syakir, Hamzah (2022) Design And Analysis Of Electronic Measurement Circuits Of Invasive Electrical Capacitance Tomography In Identifying Oil-Gas Regime For Conducting Pipe Application. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Hazirah, Roslan (2018) Design and development of electrical system on hydrokinetic turbines for home power. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Haziratul Najihah, Othman (2012) Design and analysis of a cloth drying machine by using heat waste. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazizi Azri, Ahmad Sabri (2011) Experimental study of pack carburizing of carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazlan, Haris (2006) Treatment of palm oil effluent (POME) using membrane bioreactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hazlan, Md. Rosdan (2009) 12V car battery to 230VAC power inverter. Faculty of Electrical & Electronic, Universiti Malaysia Pahang.

Hazlin, Mohamed (2014) The effect of buffers ph on electrophoretic purification of intracellular green fluorescent protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hazlinda, Sapee (2012) Optimal design of inter-plant water network with centralized regeneration system. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hazlyza, Zainon (2012) Review of speed limit for FR222 access road to Gambang toll. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Hazman, Abd Mulok (2010) Whey protein fractionation based on sp-sepharose cation exchange chromatography. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Hazmil, Hapaz (2008) Productivity improvement through line balancing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazreena, Hamzah (2012) The effects of moisturisers's physico-chemical properties on customers preference towards foreign and local products. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Hazrim, Abdul Karim (2016) Improved strength of peat soil by using kaolin and quicklime stabilizer. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hazrin, Azemi (2008) Monitoring of quality of essential oil from Etlingera SP. 2 (Zingiberaceae) by GC and GC-MS. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hazrina, Abdul Halim (2015) Pretreatment of palm oil waste via torrefaction process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hazwan Aizat, Mohamed Hussin (2008) Study of cryogenic machining for single tip cutting tooll using new cooling system design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazwan Arif, Mazlan (2013) Dynamic simulation tools for main metabolic pathway of escherichia coli. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Hazwani, A Hazah (2012) Fabrication of nf membrane using phase inversion method for dye removal. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hazwani, Harif (2012) Impact of poor management in construction. Faculty of Civil Engineering, Universiti Malaysia Pahang.

Hazwani, Omar (2014) Xylose production from oil palm frond (opf). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hazwani, Sidek Haron (2014) Enzymatic extraction of ficus deltoidea for better enhancement of extracted yield. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hazwani, Sidik (2012) Prediction of grinding machanability when grinds Haynes 242 using water based coolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazwani, Zulkiply (2012) Optimization of extraction parameters of total phenolic compound from Cosmos caudatus. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hazwani Liana, Abbas (2012) Sekolah Kebangsaan Alai online booking system (SKAOBS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Heamamalini, Parathethasan (2017) Esterification of acrylic acid and 2-ethyl hexanol in tubular reactor for the synthesis of 2-ethylhexyl acrylate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hee, Alvin Bryan Choon Loong (2009) On-line incipient fault detection in single-phase squirrel cage using artificial intelligence. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Heermandraj Naidu, Mokana Krishnan (2021) Lorawan cattle tracking system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Helmy Muhamad, Khairi (2012) Study on bonding and chemical properties of coastal plastics waste. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hemaambiegey, Gunasekgerin (2014) Proposal for an effective bus stop design at Hentian Bandar of Rapid Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Heng, Poh Chai (2012) Detection of driver cognitive distraction under secondary task using MATLAB. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Heng, Yee Wien (2010) Impact of Co2 laser cutting parameters on the quality of cut on PMMA sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Heng, Cheng Liang (2014) Study on the corrosion of carbon steel pipe upon different type of soils. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Heng, Cheng Wee (2014) Group kinect game system dodge for alive. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Heng, Poh Xuan (2012) MC68000 Microprocessor stand alone educational board. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Heng, Renyi (2014) Behaviour of two spans continuous steel fibre reinforced concrete beam under monotonic loading. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Henry Yong, Kim Fuong (2014) Treatment of petroleum based industry wastewater using electrocoagulant enhance by conventional coagulant. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hew, Chan Phang (2016) Effect of solvent : solid ratio, solvent, temperature, time and method on extraction on total phenolic compound from propolis (Trigona Thoracica). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hew, Xiao Jun (2016) Application of bio polymer reinforced with natural fiber for car door panel. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Hie Lian, Hii (2015) Synthesis and charaterization of polyamide (PA) forward osmosis membrane. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hiew, Hon Hoi (2013) A study of the effectiveness of recruitment in selecting qualified talents in service organization. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Hiew, Kuet Shang (2019) An IoT based baby monitoring system. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Hiew, Poh Ling (2014) Interactive of quick response (QR) technology in learning session. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Hilda, Zainal (2012) Auto generate women cloth template. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hilmee, Mat Jusoh (2008) An investigation into effect of nitriding on fatigue life of piston. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hilmi, Kamaludin (2017) Investigating the use of potassium-rich pellet on the feed conversion ratio, water quality analysis and fruit development of lycopersicon sp. growing in aquaponics system. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Hilmi, Mohd Zahidi (2010) Tyre pressure monitoring system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hilmi Asyraf, Razali (2009) Uncertainty analysis of two-shaft gas turbine parameter of artificial neural network (ANN) approximated function using sequential perturbation method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hilmi Hakim, Bakri (2017) A study of construction waste material management in Malaysia : a contractor point of view. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hilmi Rasyad, Mohd Hassan (2013) The impact of technology application in the improvement of service delivery: a case study at the Road Transport Department Malaysia law enforcement division of Pulau Pinang. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Hilmi Wawardi, Haris (2019) Study on clinical waste management at healthcare centres in Kuantan, Pahang. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Himala, Dewi Jaganathan (2013) Estimation system using function point. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ho, Chia Hui (2022) Vision Based Pedestrian Traffic Counting Using Deep Learning Method. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ho, Ka Hui (2012) Cost reduction study of bicycle by using DFA methods. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ho, Kit Sheng (2019) Finite element analysis of slab bridge with beam element using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ho, Man Yen (2014) Effects on quality in audio steganography. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Ho, Siang Ven (2013) Design and implementation of an autonomous multistoried car parking system with human machine interface (HMI) controlled by programmable logic controller (PLG). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ho, Wai Kei (2016) Rehabilitation of partially-failed reinforced concrete beam by using aluminium coil. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ho, Xi Cui (2016) Analysis of DNAPL migration in aggregated kaolin and sand using light transmission visualization (LTV) method. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hon Kit, Lee (2015) Molecular simulation studies of mea absorption process for CO2 capture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hon Yvain, Chong (2014) Development of emulsified wastewater treatment system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hong, Fam Sheng (2013) House monitoring system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hong, Peck Hui (2013) Tutoring system for fraction using siemer’s & angelides its architecture. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hong, Yuen Fatt (2012) Synthesis and swelling behaviour of rice husk based superabsorbent polymer composite. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hong, Jia Hi (2015) Seismic response of 4-legged fixed offshore structure in Malaysia due to surrounding earthquake. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Hong, Kim Soon (2008) Effect of different type of car to tire deformation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hong, Siau Huey (2008) Enzymatic-enhanced production of gaharu oil : effects of enzyme loading and duration time. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hoo, Seng Tatt (2010) Demulsification of water-in-crude oil emulsions via microwave heating technology. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hoo, Zi Hao (2015) Study on the concrete beam depth reduction using steel fibre under flexural load. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Hooi Fong, Tan (2012) Automatic sport facilities management system (UMPASFMS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hoong, Chan Chung (2013) Wi-Fi Remote Control Car Via Mobile Device. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hoong, Adrian Yong Weng (2014) Final examination question generator using microsoft word's macro. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Hou, Chenxiao (2014) Study on water quality of the Pahang river, Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hou, Lo Wei (2012) Optimization of cutting parameters and surface roughness on dry turning of low carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hou Lee, Sii (2013) Mechanical properties of concrete containing crushed cockle shell as coarse aggregate replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

How, Han Zhen (2018) Experimental study on effect of silica sand as partial fine aggregates replacement in epoxy polymer cement concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

How, Liew Futt (2013) Production of biodiesel from palm oil through heterogeneous catalysis using calcined eggshell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

How, Sheng Boon (2010) Productivity improvement using industrial engineering tools. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

How, Teoh Wei (2013) Recovery of dilute acetic acid via esterification reaction catalyzed by Amberlyst 15. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hua Chyn, Lee (2012) Evaluation of membrane anaerobic system (MAS) for palm oil mill effluent (POME) treatment. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hudzaifah, Mohd Azam (2008) Simulation study of the plastic floor tile for two plate and three plate mold using plastic simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hue, Wei Jy (2009) Development of MS ISO/IEC 17025 quality system (general requirements for the competence of testing and calibration laboratories) for FKM laboratory. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Huey Ning, Chan (2011) Furniture shop management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hui, Zhang (2013) Operational analysis of motorized and non-motorized vehicle flow at intersection of Changying anf Wanshow roads. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hui Min, Chow (2012) Design of a working model hovercraft. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Huong, Nice Quan (2010) Drowsiness detection for car assisted driver system using image processing analysis-interfacing with hardware. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Husain, Nik Muhammad Fashan (2007) Electronic ballast. Faculty of Electrical & Electronic Engineerinh, Universiti Malaysia Pahang.

Husni, Basharudin (2008) Bioremediation of oil contaminated wastewater using mixed culture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Husnul Fatimah, Husrin (2011) Liquid membrane tip extraction of malathion. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Husnul ‘Asyiyyah, Mohamad @ Awang (2012) Development of vision autonomous guided vehicle behaviour using neural network. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Hussein, Masayu (2007) Automatic greenhouse watering system using microcontroller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Huzairi, Hashim (2009) Development of automated guided vehicle (mechanical system). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hwa, Ooi Kuan (2010) Study of cod reduction by anaerobic digestion using mixed culture from industrial waste. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

I

Ibrahim, Iderus (2008) Artifial intelligence (AI) controller design for beam and ball system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ibrahim, Kisai (1997) Hand free set 01B-fon for motorbike. Fakulti Pendidikan, Universiti Teknologi Malaysia.

Ibrahim, Rosli (2022) Development and fabrication of ammonia gas leakage detection and monitoring system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ida Nuryani, Ibrahim (2008) Preparation and permeability study of polysulfone membrane for CO2 separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Idham Ariff, Mat Ali (2010) Design and analysis solar car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Idris, Md Yusof (2008) Application occupational safety and health in industry case study : CCM Fertilizers Sdn Bhd. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Iffah Billah, Nor Hashim (2014) The effectiveness of the implementations on the safety and health practices at construction site in Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ihsan, Ahmad Zubir (2007) Design and development of encoder sensor with graphical user interface (GUI). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ihsan, Md Yusoff (2017) Determination of hydrology cycle in Universiti Malaysia Pahang (UMP) Gambang and Pekan campus. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ikhwan Muhammad, Hillmee (2019) Source code optimizer using local optimization approach for java based generic code clone detection. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ikmal Izzat, Abdullah Karim (2019) Evaluation on design-build procurement process in construction industry in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ilham Ariff, Mohammad Fadzli (2023) Sales Prediction Using Artificial Neural Network. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Ilmanfaiq, Hamzah (2013) Effect of mig and tig welding on hybrid structure using modal analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ilyas, Ishak (2008) Optimization of engine mounting bracket location. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Indok Nuratikah, Nizamudin (2017) Effect of nanoclay on mechanical and thermal properties of kenaf recycle polyethylene wood plastic composites. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Insyirah, Mohd Yunus (2012) assenger information system (PIS) for Kuantan - Tanjung Lumpur bus route. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Insyirah, Samsuddin (2014) Effect of imidazole concentration and type of metal ion on the purification of recombinant green fluorescent protein using an affinity chromatography. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Intan Alyani Nazirah, Wahgiman (2016) The impact of hypermarket operation to local retailing business in Bukit Gambir, Ledang District, Johor Darul Ta’zim. Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Intan Azira, Azahar (2011) Mail notification system using SMS. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Intan Diana, Yusof (2010) Degradation of dye wastewater using aerobic membrane bioreactor. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Intan Diana, Musa (2012) The causes and effect of delay in construction industry project. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Intan Lyana, Ahmad (2014) Synthesis and characterization of hard kappa carrageenan capsule through glyoxal and glyoxylic acid crosslinking. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Intan Najiha Akhmar, Saharuddin (2017) The probability distribution of daily rainfall distribution in Klang Valley. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Intan Noorleana, Rosdi (2009) Growth optimization of N-fixer, isolated from biofertilizer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Intan NurMarzliny, Mohd Akmallah (2013) Early stage writing application for beginners with precision evaluation (alphabet module). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Intan Nursyafiqah, Mohamed Hissam (2016) The Effect of Malaysia Goods & Services Tax (GST) to the construction industry. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Intan Safinaz, Ismail (2010) A comparative study on anaerobic treatment between ponding system and digester tank system for palm oil mill effluent (POME) treatment. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Intan Sakinah, Mohd Sharip (2012) Fischer-Tropsch (FT) synthesis of hydrocarbon over mesoporous CO/SBA-15 catalysis. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Intan Shafinaz, Abd Manaf (2012) Poly (vinyl alcohol) (PVA) nanofibers embedded with silver nanoparticles for antibacterial studies-by electrospinning method. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Intan Shuhada, Mustafa (2014) The effect of POFA as cement replacement material towards thermal insulation of aerated concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Intan Suraya, A. Rahim (2018) Effect of fly ash as partial cement replacement properties of lightweight concrete subjected to air curing. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Intan Yasmin, Ismail (2016) Monitoring of the surface roughness by using acoustic emission analysis during end milling process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Intan Yusniza, Mohamad (2014) Development of high thermal building nano-insulation material using pu nanocomposites for roofing application. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Intansarah Sahira, Mohd Noor (2018) Electroporation of lignocellulosic biomass. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Iqbal Zulkarnain, Abdul Aziz (2007) Object's RGB color extraction. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Iqmal Hakim, Mohd Kordi (2014) Characterization of biodiesel production from moringa oleifera. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Iqmil, Hamdan (2013) Utilization of Eggshell Waste as Solid Catalyst for Biodiesel Production from Jatropha Curcas Oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Iradatul Hanis, Abd Hamid (2017) Improving safety performance in constructions project in Malaysia ( case study : in Kuantan ). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Irman Agoes, Mohd Simin (2010) PSM & PTA evaluation system using PDA (PPESUP). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Irwan, Misalam (2013) Flow straightening analysis in an open channels flume. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Irzad, Hairani (2012) Online repository system for Petakom club. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Isaac King, Yiu Joa (2012) Controlling speed and direction of stepper motor using XBEE module. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Iskandar, Abdul Halim (2017) An experimental study of the structural capacity of composite beam (concrete cast I-beam). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Iskandar Izany, A Rahman (2008) Computational stress and modal analysis of automobile tyre. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Iskandar Rizan, Muhamad (2012) Transmission mode ultrasonic tomography to identify liquid or solid flow regime. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Islahuddin Idha, Nawawi (2009) Finite element modelling of Erichsen Olsen sheet metal formability test. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Isma Farhan, Roslan (2017) Properties of concrete with partial rice husk as fine aggregate replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ismail, Ab.llah (2010) Performance of coated carbide cutting tool while machining aluminium alloy and mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ismail, Mohd Fitry (2007) Toolbox for power system fault analysis using MATLAB. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ismail, Nuurdianty (2006) Mini smart car. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ismail Ammar, Mohamat (2013) The study characteristics of electrospinning nanofibers in polyetyhlene oxide(PEO)for controlled released and target delivery. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ismayuzri, Ishak (2013) Development of an image rotary encoder for motion control. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ismayuzri, Ishak (2008) Small cleaning robot for office window. Faculty Of Mechanical Engineering, Universiti Malaysia Pahang.

Iza Nor Afinie, Mohd Samuri (2013) Ergonomic study on eye discomfort for using ump website homepage by applying Jakob Nielsen’s heuristics. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Izar Farhan, Nor Khiri (2009) The best compression ratio of modified piston for compressed natural gas(CNG)usage. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Izni Syarinaz, Ismayuddin (2006) Fingerprint recognition using feature extraction. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Izwan, Abdul Rahman (2009) Zinc removal by natural microflora. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Izyan, Ismail (2012) Design of optimal water allocation network in chlor-alkali plant. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Izyan Shahirah Aimi, Shaharuddin (2015) Assessement variability of annual daily maximum rainfall of Pahang, Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Izyana Jannati, Sabri (2019) Study on factors that lead to the abandoned building project in Borneo (Sabah & Sarawak). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Izzah Suhaila, Abu Bakar (2010) Extraction of papain enzyme from papaya leaves using hot water extraction with ultrasonic – assisted pretreatment. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Izzan Hairi, Mohd Ibrahim (2009) Design and evaluation of the empennage for reconnaissance UAV. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Izzat, Mohamad Adnan (2010) Algorithm development for optimization of a refrigeration system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Izzat, Nazar (2016) Mechanical behaviour of polymer based bamboo composite 1. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Izzat Akmal, Ruslee (2017) Mechanical properties of cement brick using rice husk ash (RHA) as cement replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Izzat Hafifi, Ahmad Ariza (2012) Help Desk System. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Izzat Zikri, Musa (2013) Design and fabricate tandem bicycle front part. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Izzati, Isahak (2018) Physiological and psychological effects of heat exposure among steel industry workers. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Izzati, Mohd Khalid (2018) Performance of lightweight concrete contain palm oil fuel ash towards elevated temperature subjected to air cooling. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Izzati Farrahiyah, Mazlan (2011) Development of images to braille conversion software for alphabets using template matching and rule based. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Izzatulhanis, Rosli (2015) Adverse effect of anthropogenic activities on water quality of the Pekan River. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Izzudin, Nazar (2016) Analysis of wear on abrasive water jet nozzle. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Izzul Izwan, Ismail (2010) Modal analysis of engine piston rod for small engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

J

Jac Kie, Si (2012) A design of a community of practice (COP) portal. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Jagatis, Balaiyah (2013) Effect of chronic obstructive pulmonary disease on airflow motion using computational fluid dynamics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jaleha, Sathar (2012) Optimization Of Bacterial Cellulose Production From Acetobacter Xylinum By Using Response Surface Methodology (Rsm). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jamail, Jamal (2009) Stress analysis on front car bumper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Jamil, Roslan (2014) Characterization of essential oil from malaysian curry leaves. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jamil, Zulkeple (2016) Mechanical behaviour of polymer based bamboo composite 2. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Jamila Sahira, Junaiddi (2023) Smart Blind Stick With Emergency Button Using Internet Of Things (IoT). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Jamilah, Junuh (2009) A comparative study on protein separation using different techniques. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jamilah, Mohamad (2012) Sustainable parking management strategy for Tengku Ampuan Afzan Hospital Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Jamilah, Mustafha (2012) Prediction of grinding machinability when grind aluminium alloy using water based coolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jamuna, Kanaston@P Ganesan (2018) GPS-based mobile application for wheelchair patients. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Janice Jothi, Pandian (2009) Solar powered battery charger with state of charge indicator circuit. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Jantie, Beatrice Connie (2007) Strength variation of pre-strain aluminium alloys (axial compression) due to isochronal annealing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jashiratulain, Ahmad Jailani (2010) Determination of cadmium (Cd) and chromium (Cr) concentration at surface and sub surface soil around newly-closed landfill in Ulu Tualang, Temerloh. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Jasniah, Jamil (2019) E-management for drugstore pharmacy. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Jasveena, R.Prabhagaran (2013) Study on Delignification of Fiber on the Temperature and Naoh Added Concentration by Ultrasound Assistance. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Jaycelyne, Lemba Jerry (2012) Modeling of PV systems by using Matlab/Simulink. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Jedidiah, Johnny (2006) Conceptual design of 5 kg/hr production of pentaerythritol tetradodecanoate (petd). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jee, Keh Lih (2013) A study of causes and effects of project change in construction industry. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Jeevan Nair, Vasudevan (2015) Development of coating for formaldehyde scavengers in wood composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jeff Collven, Claisdell Lorren (2022) Voltage Sag And Swell Mitigation Using Grey Wolf Optimizer (Gwo) For A Single-Phase Grid-Connected Photovoltaic System. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Jeffry, Ahmad (2009) Flow analysis on diseased human airway in second and third generation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jefry, Dedi Efendi (2009) Valve timing study of a single cylinder motorcycle engine /. Faculty of Mechanical Engineering , UNIVERSITI MALAYSIA PAHANG .

Jeniffer, Chegaram (2012) Image steganography. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Jenit Gervase, Peter Lidadun (2014) Pineapple (ananas comosus l.) peels as corrosion inhibitor for carbon steel in hydrochloric acid solution. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jeprol, Magansal (2010) Counting available parking space using image processing. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Jeremy, Chong Zhineng (2018) Evaluation of optimum fiber length of bamboo fiber reinforced concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Jessica Olivia @ Simon Paie, Anak Paie (2011) Inventory management system using RFID for FSKKP laboratory in UMP. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Jessie, Tiong Kung Yen (2016) Peat soil treatment using transformed egg shells (tes) as chemical stabilizer. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Jessinta, Sandanasamy (2012) Larvicidal properties of extracts from different parts of neem (Azadirachta Indica) against Aedes Aegypti mosquitoes' larvae. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Jesslyn, Tan Kim Ean (2014) Simulation of reactive distillation column for n-butyl acrylate production from dilute acrylic acid. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jessy Lynn, Jaspin (2017) Carbon dioxide (CO2) dry reforming of glycerol for syngas production over rhenium promoted on Ni-based catalyst supported on santa barbara amorphous 15 ( SBA15). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ji Siang, Tan (2015) Hydrogen production from CO2 reforming of methane over cobalt-based catalysts. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jia Xin, Jong (2013) Study on water quality at Tasik Chini, Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Jiah Chee, Soh (2015) Green reduction of graphene oxide by using phtoextracts from banana peels. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jie, Liew Kok (2013) Scale up study of salt added batch distillation of azeotropic mixture : isopropanol/water. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jimy, Ronald Atorm (2012) Separation enhancement of palm kernel by its specific gravity and flow rate of clay water bath. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Jin Keong, Gan (2014) Photocatalytic activity and kinetic study of dye removal over CuFe2O4 under visible light irradiation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jina, anak Muli (2008) Computer-based instrumentation system for temperature measurement using thermocouple in MATLAB application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Jo Ying, Lee (2014) Factors influencing the intention to adopt green supply chain initiatives in manufacturing firms based on Theory of Planned Behavior (TPB). Faculty of Industrial Management, Universiti Malaysia Pahang.

Joachim, Agostain (2022) Ump Intelligent Chatbot Using Dialogflow. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Joanne, Tey Choo Hong (2013) Ferulic acid production from banana stem waste: kinetic study. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Joannes Niegel, Mekiun (2022) Design and development of surface unmanned vehicle (SUV) system mechanism and vessel. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Joannes Victor, Valentine @ Dol (2008) Treatment of POME via chitosan based flocculation : study the effect of dosage chitosan in removal oil from POME. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Joe Wee, Tan (2011) Common paddy disease identifier. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Johari, Bar Azwar (2010) Investigation of circular based micropump diffuser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Johari, Ismail (2008) Design and analysis of vortex generator for a HEV model. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jolhi, Brahim (2010) Design and fabrication of concentrated solar thermal (CST) system for solar cooker application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jonatan, Jacqlyn (2012) Liquefied petroleum gas(LPG)storage design. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Joshua Singh, Mantar Singh (2014) Production & characterization of multi-walled carbon nanotube (mwcnt) reinforced polyester. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jou, Wendy Kong Yin (2013) Removal of manganese from synthetic wastewater by adsorption. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Joyce, Ting Shu Qian (2016) Behaviour of reinforced concrete beams strengthened externally using pineapple leaf fibre (PALF) epoxy composite plate. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Jubrey, Musrey (2014) The effect of mix ingredient on compressive strength and density of oil palm shell lightweight aggregates concrete containing palm oil fuel ash as a partial cement replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Judy, Wong (2018) Treated polystyrene microcarriers vero cells using ultraviolet/ozone (UVO) expansion of serum-free medium adapted. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Juliana, Junaidi (2016) Solid waste management in building construction site. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Juliana, Md Nor (2016) The importance of reliability of machine on operational improvement : a case study. Faculty of Industrial Management, Universiti Malaysia Pahang.

Julius, Raymondee Junior (2010) The effect of suppression agents towards liquefied petroleum gas(LPG)& natural gas(NG)explosion limit. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Junaidi, Rahman (2017) A study on effectiveness of pedestrian bridge utilization at Jalan Tanah Putih. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Jupin, John Arthur (2019) Phishing attack detection using machine learning method. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Juzailah, Mohd Kheri@ Mohd Khairi (2010) Cisco router configuration using GUI concept. FACULTY OF COMPUTER SYSTEMS & SOFTWARE ENGINEERING, Universiti Malaysia Pahang.

K

Kae Shin, Yong (2012) Simulation of identifying shortest path walkway using particle swarm optimization (PSO). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Kah, Weng Siew (2012) Enhancement of biocellulose production in mixed medium culture. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Kah Hoay, Tan (2015) Synthesis and characterisation of hydrophobic catalyst – Cs salt of 12-phosphotungstic acid functionalised dealuminated usy for the esterification of acrylic acid with butanol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kam, Seng Hai (2018) Effective dispersion of carbonnanotube in epoxy grout for structural rehabilitation. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Kam, Yuen Yuk (2014) Study quality and neutralization of rainwater. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Kamal Ariffin, Mohamad (2009) Uncertainty propagation analysis of artificial neural network (ANN) approximated function using numerical and analytical method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Kamaluddin Sarif, Sukardi (2012) Optimization of fermentation for phb biopolymer using oil palm trunk SAP as medium component. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Kamarah, Santini Raj (2010) Effect of natural filler on the characterization of natural rubber. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kamarudin, Kamry (2012) Boost converter with power factor correction. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Kamarul Al-Hafiz, Abdul Razak (2008) Finite element analysis of welded circular thin wall structure. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kamarul Ariffin, Mohd Mahpal (2010) Comparison of SLAB design between BS 8110 and Eurocode 2 by using microsoft excel. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Kamarul Ariffin, Idris (2008) Effect of ammonia / water ratio in the performance absorption chiller. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kamarul Azlan, Abd. Hamid (2008) Production of cellulose fiber from oil palm frond using steam explosion method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kamarul Izhan, Soh (2010) Graft copolymerization of methyl methacrylate onto rice husk. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Kamarulnizal, Amrin (2010) Scale up study and comparison of three downstream processes of monoclonal antibody production using superpro designer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kamilia Hani, Mohd Bashri (2013) Study on a maximum paper fibre recovery network design. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kamleshvari, Panerselvan (2022) Design And Analysis Of Substrate Integrated Waveguide Antenna Performance For Material Characterization (Teflon). College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Kanagesswary, Shanmuganathan (2013) Online personal tutoring system. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Kanchana, Manirajah (2016) Evaluation of activated carbon from waste tyre for the adsorption of 2-chlorophenol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kang, Cheng Yong (2014) WebGL tower defense game with implementation of A* intelligence technique. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Kang, Kelvin Kai Wen (2015) Web based interactive multimedia courseware for history subject. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Kangeswary, Kuppusamy (2013) Automating the UMP open registration (or) system for course timetabling problem. Faculty Of Computer System And Software Engineering, Universiti Malaysia Pahang.

Kanna, Vitee (2022) Development of smart system for agriculture. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Karen, Yap Chia Ern (2013) A study of defects reduction in injection process of production line. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Karen Jennifer, Ganasen (2019) Comparative study on occupational stress among nursing staff in rural and urban healthcare institutions. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Karisma Dritanti, Maulidah Putri (2013) Finitte element analysis of knee pad. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Kartar Singh, Pearljeet Kaur (2010) Effect of substrate concentration in producing higher butanol compared to ethanol by using clostridium acetobutylicum. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Karthik, Vasutheavan (2012) Production of biodiesel from rubber seed. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Karthini, Kanestion (2012) Development Of Glass Coating Using Liquid Epoxidised Natural Rubber. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kartika Idayu, Tajul Arifin (2019) SMART (Smart mathematic with augmented reality technology) application for preschool. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Kasman, Mokhtar (2009) Effects of transmembrane pressure on the performance of flat sheet membrane on milk protein separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kathrina Nirmala, Manoharan (2013) Radiation grafting of fuctional polymers. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kau Mun Kit, Joshua (2015) Hydrodynamic of two immiscilible liquid flow system : biodiesel synthesis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kavindran, Suresh (2022) Modeling of cupping suction system based on system identification method. College of Engineering, Universiti Malaysia Pahang.

Kaviraj, Anbarasan (2016) Comparison of activation processes of activated carbon in removing pollutiants from palm oil mill effluents. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Kee, Heng Yik (2019) Psychological impact of noise exposure among machine operators and non-machine operators in construction sites in Perak, Malaysia. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Kee, Keing Lee (2017) Extraction of polyphenol from phyllanthus niruri. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kee, Wen Sia (2014) Interactive 3D shapes educational game for dyslexia children. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Kenrick, Bilong Pius (2014) Extraction of dibenzothiophene from model oil using ionic liquids. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Keong, Lau Weng (2013) Catalystic wet oxidation of wastewater containing acrylic acid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Keong, Stephanie Wei San (2016) Effect of nonmagnetic PbO nanoparticles addition on the microstructure and electrical transport properties of YBa2Cu3O7. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Kerk, Zhi Yuan (2023) Serious Game For Raising Awareness In Protecting Malaysia Native Wildlife (Born). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Keshavarthini, Ananadan (2023) Evaluation And Performance Of Graphitic Carbon Nitride (g-C3N4) And Coconut Shell Husk Derived-Carbon Composite For Sonocatalytic Degradation Of Organic Dye. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Kevin Krishanderan, K.Vasudhevan (2007) Design of model glider. Faculty of Mechanical Engineering, University Malaysia Pahang.

Kew Hong, Soo (2013) A study on waste generation in commercial area at Indera Mahkota 5, Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Khafniza, Khanafiah (2012) Formulation of antibiotic ointmentfrom the jatropha latex curcas. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khaidatul Hasni, Mohamad Alias @ Ayit (2009) Physical properties of soursop (Annona Muricata) powder produced by spray drying. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khaider, Abu Bakar (2009) Effect of nozzle angle on jet impingement cooling system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khair, Badri (2014) 1D sediment transport modelling in Langat river by using quasi unsteady hecras. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Khairi, Khalib (2008) Microcontroller based SMPS protection. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairil Anis, Suhaimi (2015) A study of quality of concrete at site construction and working culture during concreting. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Khairil Anwar, Abu Bakar (2010) Multifunction broom. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairil Izuan, Ahmad Tarmidzi (2010) An experimental study of carboxylic acid prepared by carbon dioxide (CO2). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Khairil Nazuan, Mohd (2006) Immobilization of á-amylase (ban) for sago starch hydrolysis. Faculty of Chemical & Natural Resources Engineering, University College of Engineering & Technology Malaysia.

Khairin, Syam (2013) A model working hovercraft. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Khairin Chan, Ibrahim Chan (2023) Social Engineering Educational System: SECURIFY. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Khairu Aizam, Ibrahim (2006) Extraction of essential oils from ginger rhizome using steam distillation method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairul Afham, Sani (2005) Network issues in KUKTEM and solutions. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Khairul Afif, Mohammad (2012) Silver recovery from spent IPA using solid liquid extraction. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Khairul Afif, Bakar @ Ismail (2008) Optimization of patchouli oil extraction by employing design of experiment (DOE) method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairul Afiq, Zakaria (2012) Speed control of DC motor by using fuzzy logic controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Aizat, Abdul Rahim (2010) One-dimensional simulation of a 4-stroke SI engine employing novel cylinder head concept : intake and exhaust flow investigation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Anuar, Abdullah (2010) Potential natural gas pipeline at residential college unit (UMP). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Khairul Anuar, A. Rahman (2012) Design of revetec engine cam with cycloidal motion profile. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Anuar, A. Rahman (2012) Design of revetec engine cam with cycloidal motion profile. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Anwar, Ibrahim (2012) The effect of corrosion defects on burst pressure of pipelines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Anwar, Mohamad Said (2009) Ultrasonic extraction of antioxidant compound in guava. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairul Anwar, Mat Salim (2008) Implementation of integral control state feedback controller for coupled tank liquid level system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Anwar, Mohd Yakop (2008) Automatic pet feeder with client / server application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Anwar, Zainal Abidin (2013) Design and development of android application for fluid properties ebook and calculator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Asraf, Mazzlan (2009) A preliminary design of durian peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Azirul, Muhamad Asrai (2013) Destabilization of crude oil emulsions via microwave assisted ultrasonic technology. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairul Azlan, Ismail (2012) Optimization of cyclone efficiency for separation of fibre and shell from palm kernel. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Khairul Azmi, Mohd Mawardzi (2012) Investigation of machining performance of the coated carbide cutting tools with murakami surface pretreatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Azmi, Mohd Yusoff (2010) Active sway control of a gantry crane system using LQR controller. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Azmil, Adzmi (2008) Motor speed controller using fuzzy logic method for PCB drilling operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Azri, Ngadimen (2008) Design and development of multiuse trolley. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Azri, Ngadimen (2012) Develop a weight detection unit of the glass collection machine with reward system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Khairul Bahrin, Shafie (2009) Mercury removal petrochemical wastewater using hollow fiber external membrane bioreactor. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Khairul Bariah, Mashid (2012) The parametric study of electromagnetic for energy harvester. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Bariyah, Abd Rahim (2010) Online fingerprint recognition. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Danial, Abd. Latif (2010) Investigation of abundant treated sea sand (ATSS) with different percentages in cement brick ratio 1:6. Faculty of Civil Engineering & Environmental , Universiti Malaysia Pahang .

Khairul Faezi, Mohamad Alias@Ayit (2010) A computational model for aneurysm growth. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Faiq, Selaiman (2006) Case study : demolition practice of old MARA building on Lot 1767, Lot 1218 and Pt 4, Section 46, mukim Bandar Kuala Lumpur, Jalan Tuanku Abdul Rahman. Faculty of Civil & Environmental Engineering, Universiti Malaysia Pahang.

Khairul Ikhwan, Anuar (2022) Biomethane Production From Potato And Pseudostem Banana Waste By Anaerobic Digestion. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Khairul Izwan, Ismail (2014) Analyzing network performance in Universiti Malaysia Pahang Residential College Main Campus (Gambang). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Khairul Rafik, Abdullah (2009) Gas dehydration process by using triethylene glycol and silica gel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairul Ridhwan, Zainudin (2010) Thermodynamic analysis of ground source heat pump. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Rizal, Suhaimi (2015) Strength performance of banana fiber ash mortar. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Khairul Syahmi, Ahmad (2012) Development of round die for press brake machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairulanwar, Abd Rani (2010) Design and development of gearing system for car simulator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairun Hasmadi, Othman (2009) CFD simulation of heat transfer in shell and tube heat exchanger. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Khairun Nadrah, Hamidzon (2012) The evaluation on the performances of a roundabout at Taman Tas, Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Khairun Nisa, Affandi (2014) A comparative study of BIM and CAD (architecture). Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Khairun Nor Aimi, Ghazali (2010) Palm oil classification using RGB and fuzzy. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairunisa, Mohd Kadir (2013) Design reed controller for MIDI auto-saxophone. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Khairunnisa, Ibrahim (2017) Phase formation and electrical properties of sodium bismuth titanate doped by barium titanate. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Khairunnisa, Khairuddin (2018) G-suite digital school for education. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Khairunnisa, Muhammad Husain (2016) A Study of optimum oil palm frond (OPF) ratio in cement sand brick. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Khairunnisa Asyiqin, Jamaludin (2017) Development of the flood risk map for Sungai Isap area. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Khairunnisak, Noordin (2014) Fast track online shopping retail store using object character recognition image (OCR). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Khalaf, Emad T (2012) Enhancement of cryptography and transform domain in steganography for higher embedding capacity. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Khaled Omar, Abdullah Al-Orabi (2023) Development Of Mangrove And Salinity Distribution Mapping For The Environmental Sustainability In Kuantan Estuary Using RS-GIS Technology. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Khalifaturrahim, Ab Rahman (2013) Experimental study of alternative fuel performance operating in single cylinder diesel engine. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Khalilurrahman, Azizan (2012) Fabrication of antibacterial bio composite from bacterial cellulose and Areca Catechu extract. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khalisah, Abdul Basid (2014) Smart mobile emergency system for paramedic user (SMES). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Khaliswaran, Keresnan (2012) Development of user interface for vibration measurement. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khalizatul Radhiah, Kasim (2010) Heat treatment of carbohydrates to produce caramel color. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Khaw, Yong Hui (2010) Performance of lightweight foamed concrete using laterite as sand replacement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Khim, Tan Weng (2013) Dynamic modelling of crude distillation unit. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khoh, Huey Hun (2011) E-system for education company. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Khok, Jess Lyn (2010) Embedded PC based wireless communication using XTEA. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khomathan, Valayetham (2009) Development of spray dried sugar cane powder. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khong, Jia Wei (2012) Probabilistic finite element analysis of steel roof truss using Ansys. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Khoo, Choon Gek (2012) Production of virgin coconut oil via water soluble materials and centrifugation method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Khoo, Kok Hong (2014) Online dental management system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Khoo, Sue Ann (2012) Enhancement of flow in pipeline transportation for crude oil emulsion. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Khoo, Ying Siew (2017) Effect of electrolyte addition and type of solvents used on the quality of nanofiber scaffold. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khor, Huoy Thing (2007) Home weather monitoring system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khor, Ken Hwan (2014) Electrospinning parameters for organic polymers for nanofiber production. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khor, William Kieng Ann (2005) Chess tournament management system (scoring module). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Khorsiah, Sabar (2008) Mercury removal using pseudomonas putida (Attc : 49128). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kiat Keng, Lee (2014) Factors affecting work-related stress of office staff in small manufacturing enterprises in Klang. Faculty of Industrial Management, Universiti Malaysia Pahang.

Kien Chung, Bert Chin (2012) Dynamic modeling of a reactive distillation column. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Kim Chen, Sick (2014) Modeling the operation processes in food manufacturing by using simulation technique. Faculty of Industrial Management, Universiti Malaysia Pahang.

Kim Sung, Chong (2013) Prediction of burst pressure on steel pipes using Gurson-Tvergaard-Needleman (GTN) model. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kioh, Shin Fang (2010) Protein denaturation in pilot scale spray dryer. FACULTY OF CHEMICAL & NATURAL RESOURCES ENGINEERING, Universiti Malaysia Pahang.

Kishore, Kannan (2010) Preparation of synthetic polymer from plastic waste using sulphur dioxide. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kit, Thium Keng (2013) UMP virtual directory in augmented reality. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ko, Desmond Khang Siang (2014) Performance analysis on voip for kolej kediaman 2 & 3, Universiti Malaysia Pahang. Faculty of Computer System and Software, Universiti Malaysia Pahang.

Koay, Abigail May Yee (2011) Log file analysis using signature detection (LoFA-SD). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Koay, Boon Hui (2016) A study of lean six sigma implementation on improving automotive operational performance. Faculty of Industrial Management, Universiti Malaysia Pahang.

Kogilan, Govindasamy (2009) Design and analysis of a rear wheel cover for a car using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kogulan, AL M. Saiger (2008) Guava powder production using pilot scale spray dryer and nutrient retention study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kogulan, M. Saiger (2008) Guava powder production using pilot scale spray dryer and nutrient retention study. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Koh, Chai Fong (2017) Development of photocatalyst for CO₂ conversion to hydrocarbon fuel. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Koh, Kelvin (2009) Analysis of heat gain against cooling capacity at occupied building. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Koh, Kim Ho (2009) Multi-patient monitoring system using a reliable wireless sensor protocol. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Koh, Qing Zhe (2022) Home Fitness Mobile Application. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Koh, Rui Shuan (2016) Sulphide removal using phytoremediation process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Koh, Tze Mian (2014) Study on the relationship between head loss and the characteristics of piping system. Faculty of Civil Engineering and Earth Resources, UNIVERSITI MALAYSIA PAHANG .

Koh, Yeong Cherng (2022) Integrated Smart Irrigation System For Okra Plant. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Kok, Jun Jie (2014) A study of modulus rupture and water absorption of cement mortars with replacement of palm oil fuel ash (PDFA). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Kok, Yin Hui (2011) Design and fabrication of stark whiteboard. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kok Wah, Liew (2012) An efficient approach for vision inspection of IC chips. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Kong, Choon (2023) Kid Learn. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Kong, Deyi (2013) CFD simulation of particle mixing in a fluidized bed. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kong, Jun Hao (2023) A Cryptojacking Detection System With Product Moment Correlation Coefficient (Pmcc) Heatmap Intelligent. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Kong, Kei (2023) Kiki: A Chatbot Application For OCD In Android Mobile Application. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Kong, Pu Wei (2013) Evaluation of tensile properties of natural sand particle reinforced polymer composite. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kong, Zhung Jie (2017) Implementation of swarm intelligence algorithms on mobile robots. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Kong, Zi Ling (2015) Enzymatic conversion of cassava starch to flour. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Koo, Nelton Chwee Yang (2012) Design of wind tunnel (fluid flow analysis). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Kor, Yue Kim (2010) Investigating the effect of solid powder particle type on the turbulent multiphase flow in pipelines. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Kousalya, Subramaniam (2023) Life Cycle Assessment Of Copper Recovery Process From Printed Circuit Boards. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Krijah, Vatumalai (2022) Performance Analysis Of Dynamic Control In Dual Active Bridge Dc-Dc Converter. College of Engineering, Universiti Malaysia Pahang.

Krishnamurtthu, Sivathiban (2010) Voice to text system for disabled (V2TS). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Krishnan, Jagan Rao (2008) Development of spray dried strawberry juice powder. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Krishnan, Kautham (2019) Merit management web application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Kritharan, Rajandran (2022) Microcontroller-Based Spectrum Analyzer System. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Kritiga Shankar, Murugesan (2012) A comparison between the modern hydro distillation technique and microwave extractor in extracting lignans from phyllanthus niruri. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ku Marsilla, Ku Ishak (2006) Effect of different organic loading rate on biological pretreatment to chemical pulping process. Facutly of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kuah, Yi Mei (2015) Flexural behaviour of polyethylene terephthalate (PET) fibre in concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Kumutha Naidu, Gunasegran (2019) Intelligent bee hive with honey flow extractor with application of solar panel as power source. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Kun, Chee Yong (2017) Simulation study on reinforced concrete beam with variation of shape and size of opening. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Kunasegeran, Thinesh (2012) Direct current motor control led by microcontroller created PWM. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Kwai Loon, Tan (2014) Contractors perspective of preferred risk allocation in public-private partnership (PPP) project in Pahang. Faculty of Industrial Management, Universiti Malaysia Pahang.

Kwan, Shong Hann (2010) Implementing cryptography in database. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Kwan, Hui Yee (2017) The undrained shear strength of soft clay reinforced with single encapsulated lime bottom ash column. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Kwee Ming, Chang (2012) Integrated environmental protection biofeedback game (IEPBG) using galvanic skin response (GSR) sensor. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Kwo Wei, Teh (2015) Study on the valorization of rice waste by using torrefaction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

L

Lafsah, Mat Daud (2012) THD and efficiency study for PV grid-connected. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lagunesvary, Ganesan (2013) Heat exchanger for solar collector. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Lai, Chong Jin (2022) System Identification And Control Of Automatic Car Pedal Pressing System For Low-Speed Driving In A Road Traffic Delay. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lai, Chong Lan (2014) Medical certificate verification system using QR code. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lai, Jin Frve (2012) Phytosterols from the seeds of petai (Parkia Speciosa). Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Lai, Kok Lee (2021) Pipe nozzle design effect to the speed of turbine and output voltage of the pico-hydropower generator system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lai, Pauline Huey Min (2017) Fire safety practices among residents in Azelia Bukit Banyan, Sungai Petani, Kedah. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lai, Saw Wai (2013) Simulating modelling for improving productivity of rice packaging mill. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Lai, Si Ying (2010) Optimization of molding parameter effect to warpage and shrinkage based on plastic flow simulation software : swimming google. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lai, Weng Hong (2010) An effective design of sun tracking system to increase the performance of solar cells. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lai, Woon Shyz (2012) Prediction of grinding machinability when grind P20 tool steel using TiO2 nanofluid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lai, Wui Chung (2016) Mobile application on learning cardiopulmonary resuscitation (L-CPR). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lai, Yi Xiang (2014) Pairwise test suite generator tool based on harmony search algorithm (HS-PTSGT). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lai Ching, Wong (2012) Knowledge portal for handicraft products (KM). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lai Kin Ming, Vera (2013) Preparation and characterization of catalyst from local industry waste, red gypsum for biodiesel synthesis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lailatul Jalilah, Kaharudin (2014) Experimental study on flow around immersed objects. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Laing, Penelope Ering (2013) Effects of media components on arachidonic acid production by Candida krusei under submerged condition. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lam, Cheng Yong (2019) Finite element analysis of steel frame for high rise building structure using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lam, Kheng Yik (2012) Remote data logger with multi-sensor for greenhouse. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Lam, Mian Mian (2017) Flow behaviour enhancement in micro-channels. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lam, Yan Shin (2022) House interior design with Augmented Reality technology. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Latifah, Abu Bakar (2012) Miscibility study of gaharu essential oil in water and organic solvents. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Latifah, Md Yusoff (2008) Experimental analysis on drilling process of CFRP composite laminates. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Latifah, Shabudin (2002) Active sway control of a gantry crane system using hybrid input shaping and PID control schemes. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Latifah Sakinah, Ismail (2013) Thermodynamic analysis of glycerol dry reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lau, Siaw Jing (2013) Thermal degradation kinetics of bioflavonoids from Orthosiphon stamineus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lau, Yih Bing (2010) Effect of foamed concrete with egg albumen. Faculty of Civil and Environmental Engineering , Universiti Malaysia Pahang .

Lau, Zhen Chyen (2010) Experimental laser-machining of silicon wafer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lau, Jett Chen (2017) The comparative study of mechanical properties of coconut shell as partial replacement of fine aggregate in concrete with different curing method. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lau, Kun Lu (2015) Continuous transesterification for tubular reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lau, Lee Swan (2014) A study of soil stabilization by hydrated lime at Kampung Kedaik Asal, Rompin, Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lau, Lik Yun (2016) Application of palm oil fuel ash (POFA) as a stabilizer in tropical peat soil. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lau, Zi Thiam (2014) A study on the implementation of safety practices in Malaysia construction industry. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lau Chin Yee, Cindy (2015) Reusability and leakage of immobilized laccase enzyme. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Law, Dah Lit (2010) Swine farm wastewater treatment at Kampung Selamat, Seberang Perai Utara,Penang using Phytogreen Plants via Eichhornia Crassipes SP,Pistia Stratiotes SP and Typha Latifolia SP. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Law, Xue Ni (2012) Detail design of waste plastic bottles rescue boat. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Law, Chee Hong (2009) Performance optimization of domestic refrigerator using experimental method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Law, Chin Hao (2014) Location aware system using bluetooth low energy beacons. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Law, Hoon Chit (2017) Experimental evaluation on the performance of waste biomass briquettes formation and combustion characteristics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Law, Jessica Ka Ing (2015) Analysis and countermeasure to improve machine efficiency by using overall equipment effectiveness (OEE) method. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Law, Jia Swee (2018) Intelligent traffic sign recognition system for autonomous vehicle navigation (ITSRS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Law, Kok Sin (2010) Edu_Vistec : a software for computer vision educational trainer using MATLAB. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Law, Paul Lik Pao (2023) Loan Eligibility Classification Using Machine Learning Approach. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Law, Peng Hang (2019) Development of working at height management system based on legislations in Malaysia. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Law, Woon Phui (2013) Optimization of solution polymerization of methyl methacrylate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Law, Xue Ni (2012) Detail design of waste plastic bottles rescue boat. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lawanya, K. Ramu (2015) Optimization of bioethanol production using oil palm frond juice. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lawrence, Blasius (2010) Performance analysis on percentage of wheel slip for a passenger car using GPS and wheel speed sensor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lay, Hui Lian (2018) A study on road safety awareness and practices among secondary school’s students. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lay Kee, New (2012) Enhancement of the tour guide webpage for Kinta tour guide webpage based on human computer interaction (HCI) elements by Jacob Nielsen. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Le Xin, Lee (2012) Design of obstacle avoidance robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Leakath, Muhammad Zafran (2011) Characterization of pysio-chemical properties of novel one stop chemical method in preparations of copper nanofluids and possible explanations. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lee, Chooi Ying (2010) Mechanical properties of concrete with 5 and 10 percent palm oil boiler stone (POBS) as fine aggregate replacement. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Lee, How Cheh (2012) Development of sound source separation as hand-free interface for in-vehicle infotainmenet system (IVIS). Faculty of Electric & Electronics Engineering, Universiti Malaysia Pahang.

Lee, Jin An (2010) Compressive strength of high strength concrete using British standard, euro code and non-destructive test approaches. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Jun Hwa (2010) Case file tracking system for Badrul Lee & Associates. Faculty Computer System and Software Engineering, Universiti Malaysia Pahang.

Lee, Kim Sim (2009) Improvement of the productivity by increasing customer outputs at cafeteria on campus via simulation method in witness. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Kun Guan (2010) Performance of foamed concrete using laterite as sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Poh Seng (2010) Determination of certain thermo-physical properties of nanofluids. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Qiao Hui (2009) Total phenolic content and total flavonoid of H.Polyrhizus waste extract by using ultrasonic solvents extraction. Universiti Malaysia Pahang, Faculty of Chemical & Natural Resources Engineering.

Lee, Wei De (2011) Improving the monitoring mechanism of current warehouse monitoring system with weight monitoring. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lee, Wen Yin (2009) Design and optimization of small scale factory manufacturing system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Bee Lin (2023) I Am Here For You (Imh4u) – Chatbot For Mental Health. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lee, Chee Wei (2012) Online ordering system of PCK engineering. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lee, Chee Wor (2013) Stress behaviour of tailor welded blanks for dissimilar metals using finite element method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Cheng Yee (2015) Water desorption characteristic of red gypsum. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee, Chong Hoe (2019) Diversity of stress ranges in cables of cable-stayed bridge due to traffic loads and far-field seismic excitation. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee, Chun Hoong (2016) Waste wood block as partial coarse aggregate replacement in reinforced concrete beam. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Clement Yuon Sien (2016) Optimal charging strategy for plug-in hybrid electric vehicle using evolutionary algorithm. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Lee, Hui Li (2019) The impact of neighbourhood facilities towards the homebuyer’s buying decision for residential property in Johor Bahru. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee, Jeng Ye (2016) Fuzzy logic based obstacle avoidance strategy for mobile robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lee, Jia Qing (2018) Unity check of typical offshore wellhead platform in Malaysia using Aceh earthquake loading data and SAP2000. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Jia Wei (2015) Finite element analysis of 3D transmission tower using ANSYS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee, Jie Yen (2016) Strength of soft clay embedded with single crushed polypropylene (PP) column. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Jin Yeow (2012) The finite element analysis of behavior of bolted column to I-beam connected with channel stiffeners. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee, Jing Yue (2018) Rainfall induced residual soil slope instability : building cracked and slope failure. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lee, Ka Hung (2010) Effect of chip formation on tool wear in machining of titanium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Kelvin Khai Meng (2017) Investigation of the mechanical properties of Al-Al2O3-Gr hybrid composite fabricated by powder metallurgy. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lee, Kia Wei (2014) Solving the ITC2007 examination timetabling problem by using the late acceptance hill climbing technique. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Lee, Kok Keong (2013) To design rainwater collection system for domestic use and the economic cost analysis of the system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Lee, Kok Wai (2012) Shear strength improvement of foundation soil by using polymer fiber reinforcement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee, Kong Haur (2010) Remoted balbot. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Lee, Li Fei (2016) The barriers and challenges of ISO 14001 environmental management system implementation in Malaysia industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Lee, Lye Eng (2023) UMPool: A Carpooling System. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lee, Mei Chin (2018) Strengthening of RC beam externallly using bamboo fibre reinforced composite : a study on Gigantochloa Scortechinii. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Ming Jie (2010) PID implementation of UMP mini automation plant part 1- heating tank. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lee, Pei Qi (2016) Phytoremediation of heavy metals and desalination of brackish water with ipomoea aquatica using aquaponics system. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Lee, Pik Jun (2018) Development of isohyet map using inverse distance weighting and ordinary kriging methods for Klang River basin. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Seng Aik (2018) Effect of square hollow section on the strength of foamed concrete beam with processed spent bleaching earth as partial replacement of cement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Shin Yee (2014) Mathematics game following KSSR for primary school student. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lee, Siew Loung (2014) The effect of ultrafine palm oil fuel ash (UPOFA) on chloride resistance of concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Sin Gie (2017) Strenghtening of RC beams with bamboo fiber reinforced composite-polyester plate. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Swet Jean (2015) A study of integration of risk management and value management in construction project. Faculty of Industrial Management, Universiti Malaysia Pahang.

Lee, Ti Soon (2015) Mana rehab : a game that helps in fine motor skills rehabilitation. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lee, Tsu Xin (2013) Evaluating the performance of material handling system using simulation. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Lee, Tsu Yian (2019) Study on the soluble silica from palm oil clinker as partial cement replacement material. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lee, Wai Loon (2010) Effect of electrical discharge machining process parameter on surface topograhy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Wai Yee (2015) Effects of human resource management (HRM) practices on project performance in construction industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Lee, Wei Loon (2016) Simulation of heat flow in a direct-chill caster using comsol multiphysics. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lee, Xin Leong (2012) Numerical analysis on simplified 2d model of heart valve leaflets during cardiac cycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Yen Wah (2017) Behaviour of concrete beams reinforced jute fiber mat. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Yi Ming (2022) Cloud web server for IoT smart laboratory system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lee, Ying Ying (2012) Analysis of unbraced frame using ANSYS. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee, Yong Yong (2016) Composition and biological activities of strobilanthes crispus leaves for essential oils extracted by hydrodistillation (HD) and microwave-assisted hydrodistillation (MAHD) methods. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lee, Yue Wei (2013) Development of anion-exchange membrane chromatography from regenerated cellulose membrane by attaching different spacer arm length of diamine monomer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lee, Zhan Sheng (2016) Process simulation of co-gasification system using adaro coal & Empty Fruit Bunches (EFB) in aspen hysys. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lee, Zi Xuan (2023) Educational Multiplayer Game For Encourage Communication During Covid-19. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lee Jian, Hao (2013) The implementation of partial graph heuristic with improvement method to solve the UMP examination timetabling problem. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Lee Lay, Khoon (2013) Dynamic web-based driver task assignment calendar system project. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Lee Ling, Ling (2012) YGK Payroll System. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Lee Siew, Ling (2013) Microencapsulation and Spray Drying of Orthosiphon Staminues. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Lee Sim, Siew (2013) Patient's Chatting Mechanism Serious Game for Internal Medicine Practice. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Leenaloshni, Joganathan (2014) Walkway subgrade stabilization using fly ash. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Leng, Yee Hui (2018) Critical member analysis of wellhead offshore platform due to El Centro earthquake. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Leon, Mei Chen (2013) Pitting corrosion behaviour of aluminium alloys. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Leong, Choon Wei (2010) Inoculums development for the production of monoclonal antibody against congenital adrenal hyperplasia(cah). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Leong, Guo Bang (2013) Fabrication of air-hybrid all terrain vehicles front suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Leong, Kah En (2019) Effect of defect width upon burst capacity of composite repaired pipe. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Leong, Kah Seng (2015) Investigation on the undrained shear strength of soft clay mixed with various percentages of lime and 6 % of silica fume. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Leong, Kuan Yoke (2014) Design coordination in design development using building information modeling. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Leong, Mee Jiun (2019) Air pollution control using hibiscus cannabinus L. (kenaf) to reduce air pollutants. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Leong, Meng Li (2015) A study of PM₂.₅ emitted from cooking activities in indoor environment. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Leong, Nguk Foong (2008) A Study on microwave - assisted extraction of patchouli essential oil : effect of hexane as solvent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Leong, Pei Mun (2016) Study on ionic interaction in carboxymethyl cellulose-kappa carrageenan doped NH4Cl for bio-electrolyte membranes. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Leong, Pi Yee (2023) Purification: A Serious Game Of Environmental Issues. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Leong, Sheng Yau (2013) Copper doped titanium dioxide (TiO2) nanoparticles for enhanced photocatalytic activity under visible light irradiation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Leong, Siew Yin (2012) Moringa oleifera as a potential source of lecithin. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Leong, Weng Kai (2018) Noise exposure management system based on Factories and Machinery (noise exposure) Regulations 1989. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Leong, Zi Zheng (2016) Microcontroller based head-lamp alignment system for automobile. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Leong Wei, Theng (2012) IBM examination centre management system. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Letchmanan, Kumaran (2010) Formulation new flow improver in aqueous using natural mucilage extracted from aloe vera. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Lew, Hon Chung (2009) Development of MS ISO/IEC 17025 quality system (general requirements for the competence of testing and calibration laboratories) for FKM laboratory. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Li Mei, Tan (2014) Modeling plastics injection molding operation using simulation. Faculty of Industrial Management, Universiti Malaysia Pahang.

Lian Ni, Koong (2019) Finite element analysis of reinforcement design of voided concrete deck slab. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Liana Syafawati, Mohamad Azmi (2017) Tendering and estimating strategies In contractor organization. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Liang, Kai Feng (2010) Case study of power system state estimation by using artificial neural network. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Liang, Kai Jun (2015) FEM analysis (3D) of reinforced concrete beam with openings. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Liaw, Hui Kim (2014) Kindergarten management system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Liew, Wei Bing (2011) Online industrial sales and support system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Liew, Annie Ann Nee (2010) Optimization of machining parameters of titanium alloy in electric discharge machining based on artificial neural network. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Liew, Choon Siong (2009) PIC based hand-held IC tester. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Liew, Hui Ching (2016) Development and characterization of dual modality system using polymeric nanocarrier. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Liew, Kean Teong (2013) Design and implementation of adaptive conveyer belt for material sorting and handling assisted with image processing technology control by microcontroller. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang .

Liew, Kelvin Kai Xuan (2023) Covid-19 Fake News Detection Model On Social Media Data Using Machine Learning Techniques. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Liew, Mun Kai (2018) Performance of bubble deck slab. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Liew, Parker Be Chuan (2014) Effect of saw-dust - sea shell powder mixture on compressive strength of cement mortar. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Liew, Pei Qi (2015) Sewerage inflow and infiltration in Universiti Malaysia Pahang (Gambang). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Liew, Pei Shan (2015) The study of soft factors in team selection for construction project. Faculty of Industrial Management, Universiti Malaysia Pahang.

Liew, Sam Tat (2014) Sensitivity analysis of reinforced concrete beam with three circular web opening on beam behaviour-deflection using ansys. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Liew, Shi Yan (2014) Evaluation of the performance of wax inhibitors on wax deposition. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Liew, Tzun Ming (2016) Study of parking parameters and parking management in Hospital Tengku Ampuan Afzan (HTAA). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Liew, Xiu Qing (2017) Development of table tennis launcher. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Liew, Yoong Sang (2009) The development of embedded negative input shaping for vibration control of a flexible manipulator by using PIC controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lilan Sollan, Sarveswary (2012) UMP subject registration system in mainframe environment(zSRS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lilian, Cheah Mui Yeong (2012) Mechanical properties of concrete by using palm oil boiler stone (POBS) as partially fine aggregate replacement material. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Liliana, Azmi (2014) Online appointment system for FSKKP (OASF). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lily Diyana, Kamarudzaman (2019) Experimental study on oleochemical waste as partial cement replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lily Fareeza, Razali (2014) Treatment of patin pond water uzing ultrafiltration. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lily Suraiya, Ramely (2009) Digital KWH meter. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Lim, Chin Huey (2010) Roadsign detection and recognition (RSDR). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang .

Lim, De Jiang (2011) Webcam based maker tracking application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lim, Kim Khiam (2011) Object distance determination application using image processing technique. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lim, Li Qeat (2010) Comparative study of an open lagoon with high efficient methane free treatment plant and CDM project in palm oil mill effluent. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Lim, Meow Suan (2009) The effect of pipe length on the percentage drag reduction for water flowing into pipes with different diameters. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lim, Min Siang (2010) Solar water level controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lim, Qian Bing (2012) Implementation of ordering kanban for supplier at company Proreka (M) Sdn Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lim, See Chaw (2010) Finite element analysis of axially loaded pierced profiled composite panel. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Lim, Wai Tuck (2007) Design and fabrication of UMP go-kart chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lim, Aun Xian (2022) University E-voting System Utilizing Blockchain Technology and Zero-Knowledge Proofs. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lim, Beng Seng (2013) Production and characterization of chitosan from shrimp shells. Faculty of Chemical & Natural Resources Engineerig, Universiti Malaysia Pahang.

Lim, Cheh Siang (2011) Dental measurement system for UIAM. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lim, Chen Gen (2023) Discrete Wavelet Transform (DWT) Based Dual Watermarking For Authentication And Copyright Protection. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lim, Cheryn Shin Ching (2014) Study on effectiveness of heavy metals removal through the biosorption process using eucheuma cottonii. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lim, Chi Khang (2018) The effect of various position of square hollow section on the strength of foamed concrete beam with processed spent bleaching earth as partial replacement of cement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Chia Ni (2016) Investigation of DNAPL migration in double-porosity media using image analysis. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Chin Kuan (2016) Factors in achieving technology transfer project success : a case study of third party claims administration in Malaysia. Faculty of Industrial Management, Universiti Malaysia Pahang.

Lim, Dou Xuan (2018) Behaviour of cable-stayed bridge with cable losses. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Guo Hong (2019) GPS, fingerprint and QR-code based attendance system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lim, Jee Chao (2019) Reversible image steganography using ROI & RONI. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lim, Jia Han (2014) Simultaneous power generation and wastewater treatment by using air-cathode single chamber microbial fuel cell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lim, Jia Jun (2015) Determination of earthquake design criteria for fixed offshore platform (four-legged) due to Aceh earthquake in Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lim, Jiin Kang (2005) Chess tournament management system (scheduling module). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lim, Jing jin (2014) Design of a pre-water filter to provide aeration in filtration process. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Kah Chun (2023) UMP Confession Application. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lim, Kah Qi (2019) Effect of defect length upon burst capacity of composite repaired pipe. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Kok Wee (2016) Micro autonomous underwater vehicle. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lim, Li Yang (2019) The effectiveness of palm oil clinker (POC) in gabion wall for slope protection. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lim, Liang Heong (2007) Design and fabrication of three axis mechanism with AC servo motor in application of personal computer numerical control. Faculty of Mechanical Enginering, Universiti Malaysia Pahang.

Lim, Mei Jing (2016) Study on fabrication and mechanical properties of Al-SiC nano-composite materials. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lim, Pei Jiun (2016) Adoptation of engine for smaller enterprise (E4SE) performance measurement system (PMS) in small project based company in Malaysia. Faculty of Industrial Management, Universiti Malaysia Pahang.

Lim, Pei Yee (2022) Optimal path planning algorithm for swarm robots using bat algorithm with mutation (bam). College of Engineering, Universiti Malaysia Pahang.

Lim, Ronald Sheng Wei (2023) Sage: A Community Empowered University E-Learning Application. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lim, Rwi Hau (2009) Fabrication and characterization of biodegradable composite film from banana stem. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lim, Say Choon (2015) Helper system for managing Alzheimer's people using mobile application. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lim, Seng Kee (2014) Pairwise testing tools based on hill climbing algorithm (PTCA). Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Lim, Shi Han (2016) Prediction of temperature distribution during flashover caused by backdraft fire. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lim, Shi Ru (2022) Predicting Mental Health Disorder On Twitter Using Machine Learning Techniques. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lim, Sing Wee (2012) CFD simulation using fluent to determine the heat transfer coefficient of a packed bed system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lim, Su Pueh (2017) External strengthening of reinforced concrete beams with bamboo fiber–vinyl ester composite plate. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Syh Ho (2015) Study of silica gel as self-healing agent in ordinary portland cement (OPC) mortar exposed to extremely high temperatures. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lim, Tien Yong (2013) Productivity improvement through re-design workplace area. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lim, Ting Chin (2006) Screening of xylanase producer from soil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lim, Wei Qing (2014) Modelling of the behaviour of steel fibre reinforced concrete (SFRC) beams. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lim, Yee Siang (2019) Finite analysis of steel frame multi-storey building by using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Yen Ping (2014) Modification of compressive strength of cement mortar by oil palm shell ash. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Yi Ci (2023) Malaysia Blood Bank Android Mobile Application. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lim, Yong Zhao (2017) The mechanical properties of eggshell concrete using quarry rock dust as sand substitute. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Zi Chao (2010) Dual axis solar tracker study. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lim Jun, Lun (2013) A study of the vibration signals behavior. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Lim Ruey, Long (2013) Solving Toronto Examination Timetabling Using Heuristic Method. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Lin, Choo Quan (2013) Simultaneous power generation and waste water treatment using microbial fuel cell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lin, Tan Ban (2014) Production of the high quality torrefied oil palm biomass for efficient energy application. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lina Chong Ann, Yi (2010) Strength as concrete with spent bleaching earth as cement replacement. Faculty of Civil Engineering and Earth Resources, University Malaysia Pahang.

Lina Khalida, Norazmi (2022) Internet of things (IoT) based grid tension monitoring system. Faculty of Electrical and Electronic Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Lina Nabilah, Luqman Loke (2017) Effect of the size of multi-layer spacer configuration on membrane performance : a CFD study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ling, Jacky Kuo Bao (2010) Water quality study and its relationship with high tide and low tide at Kuantan river. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ling, Michael Chee Siang (2015) Multi-users workstations. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Ling, Sin Yie (2019) Undrained shear strength of soft clay stabilised with silica fume and eggshell ASH. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ling, Yeu Shin (2013) Study on the effect of processing parameters in the adsorption of xylose from glucose-xylose mixture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ling Wang Ming, Fiona (2015) Drag reduction in microfluidic. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Linggang, Diana (2012) Biomass gasification of sugarcane bagasse and empty fruit bunch the effect of operating temperature and particle. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Linn, Wen Teck (2007) Portable water alarm detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Liong, Boon Yaun (2011) Faculty timetabling using genetic algorithm. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Liong, Woei Chi (2023) Internet Of Things (Iot) In Smart Recycle Bin Application Using AI Technology. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Liow, Raymond Sang Loong (2010) Performance of construction company listed in Kuala Lumpur Stock Exchange. Faculty of Civil & Enviromental Engineering, Universiti Malaysia Pahang .

Livanith Kumar, Manimaran (2023) Evaluation Of Abandoned Reinforced Concrete Structure Using Non-Destructive Method. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Liyana, Amer Shah (2010) Production of biodiesel from jatropha c. oil using koh and lipase candida r. in an airlift reactor. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Liza, Ranggi (2007) Strength variation of pre-strained (transverse compressive) aluminium alloy due to isochronal annealing. Faculty of Mechanical, Universiti Malaysia Pahang.

Lizawati, Mohamad Halit (2006) Student registration management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lo, Norman Kun King (2022) Direct Tuning Phase-Shift Angle In Dab Dc-Dc Converter Using Moth Flame Optimization (Mfo) Algorithm. College of Engineering, Universiti Malaysia Pahang Al-Sultan Abdullah.

Logadarshan, Krishnan (2022) Hunter For A Blood Donor Application. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Loganaayagi, M Ganesunn (2023) The Effect Of Saltwater Concentration On Saltwater Lamp Efficiency Using Different Types Of Fuel Cell. Faculty of Civil Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah.

Logapriya, Logamaintan (2015) Adsorption of natural dye on bamboo yarn. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Logatarsan, Chandran (2017) Design, fabrication and performance test of die-punch set for powder compaction process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Loh, Simon Hock Hua (2010) Feasible laser parameter in fabrication of MEMS structure on PMMA. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Loh, Chong Sean (2013) Design, fabrication & testing of water channel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Loh, Choon Lee (2008) Effect types of coolant on tool wear and surface roughness. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Loh, Hin Ye (2023) UMP Item Trading Application. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Loh, Hooi Teng (2023) Estimating Depressive Tendencies Of Twitter User Via Social Media Data. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Loh, Huang Ming (2017) Durability studies of Spent Mushroom Compost Ash (SMCA) as partial cement replacement in concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Loh, Kha Bee (2014) Test case generator based on UML activity diagram. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Loh, Kin Ming (2022) Cancer Prediction Based On Data Mining Using Decision Tree Algorithm. Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Loh, Mei Yee (2014) Challanges of building information modelling (BIM) in project implementation. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Loh, Quo Liang (2013) Experimental analysis into the main artery of 2 chamber heart model during cardiac cycle. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Loh, Ri Jian (2017) Development of a 1-D salt intrusion modelling programme using python programming language. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Loh, Wee Keat (2014) A study of the curing kinetics of polyester resin from palm oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Loh, Wing Liong (2012) Performance of refrigerator operating with and without liquid-suction heating. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Loh, Zi Hao (2023) Automated Fertigation Mobile Application (Mobile-AFS). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Loi, Shi Jun (2016) Ultimate bearing capacity of cement columns treated peat soil using physical model. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lok, Kok Sheng (2018) Study on the operational characteristics of central area transit (CAT) Georgetown, Penang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lok, Leh Leong (2013) Soft set approach for decision attribute selection in data clustering. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Loke, Yi San (2013) A study of causes and effects of conflict in construction industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lokman, Faradilla (2006) Dye removal from simulated wastewater by using empty fruit bunch as an adsorption agent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Loo, Kian Loon (2017) Finite element analysis of concrete deep beams with various locations of opening and reinforcement arrangements. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Loo, Mei Soon (2014) Synthesis of bio-lubricant through the esterification of oleic acid and trimethylolpropane catalysed by sulfated tin (ii) oxide. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Loo, Pei Wen (2017) Evaluation of peak flow design criterion for sewerage system in Taman Mahkota. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Loo Zhang, Bin (2013) Automatic question determination level based on OBE using brute force string matching. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Loong, Winson Sia Shen (2012) Development Of Drilling Fluid System Using Carboxymethyl Cellulose (Cmc) For High Temperature-High Pressure (Hthp) Applications. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Low, Ching Chuan (2014) Emergency medical service mobile application for emergency, radiology, and pathology departments in hospital Pekan. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Low, Mee Peng (2012) Processed food knowledge portal. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Low, Miao Ying (2012) Effect of banana skins filler on thermal behavior of natural rubber latex films. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Low, Wei Keat (2015) Study of silica gel as self-healing agent in geopolymer mortar exposed to extremely high temperature. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Low,, Yee Hwa (2015) Analysis of a 4-legged fixed offshore structure in Malaysia under seismic loading. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lucella, Jack (2009) Bluetooth activated DC motor. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lukman Hakimi, Ab Wahab (2009) Modeling study power distribution system network using digsilent power factory 13.2 simulation software. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lukman Nul-Hakem, Mohd Yusop (2012) Experimental study of six-stroke engine for heat recovery. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lukman Syarif, Andi Lantara (2017) The durability study of blend cement using sewage sludge ash (SSA) and eggshell. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lum, Shirley (2017) Non-invasive hypertension monitoring in smart furniture. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lum, Wai Yin (2018) Homebuyers' buying behaviour for high rise property in Ipoh. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Luqma Illieana, Mat Isa (2017) Modelling post-fire erosion on natural slope containing nesosilicate minerals. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Luqman, Abdul Latif (2023) Integrated Nilam And Bochord Mobile Application (I-Nab). Faculty of Computing, Universiti Malaysia Pahang Al-Sultan Abdullah.

Luqman, Umar (2018) Improving the performance of RC beam with circular opening using hybrid fibres. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Luqman Nulhaqem, Abdul Aziz (2013) Influence of heat treatment on the microstructure and mechanical properties of 6061 aluminum alloy. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lwee, Kui Choo (2016) Partial replacement of cement with incinerated sewage sludge ash (ISSA) in mortar brick with natural calcium carbonate as additive. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lydiaizna, Adam (2015) Adverse effect of poor waste water management practise on the Tunggak River Pahang, Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.