Items where Subject is "T Technology > T Technology (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 4006.

A

A., Jamaludin and C. K. M., Faizal (2017) Autoclave-Assisted Synthesis of Silver Nanoparticles using Metroxylon Sagu for Antibacterial Application. Indian Journal of Science and Technology, 10 (6). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

A., Shaari and Mazrul Nizam, Abu Seman and C. K. M., Faizal (2017) Optimization of Mechanical Properties of Silver Nanoparticles (AgNPS)-Loaded Chitosan/Polylactic Acid (PLA) Biofilms by Using Response Surface Methodology (RSM). In: 2nd International Conference on Materials Science and Nanotechnology (ICMSNT 2017) and 2nd International Symposium on Material Science and Technology (ISMST 2017) , 19-22 April 201 , Auckland, New Zealand. pp. 1-6., 109 (01001). ISSN 2261-236X

A., Shah and Siti Nurul Fasehah, Ismail and Mas Ayu, Hassan and R., Daud and Che Ghani, Che Kob (2021) Improvement of corrosion resistance of tin coated on titanium alloy for biomedical application. In: Journal of Physics: Conference Series; 2nd UPY International Conference on Applied Science and Education, UPINCASE 2020 , 3 - 4 November 2020 , Yogyakarta, Virtual. pp. 1-10., 1823 (1). ISSN 1742-6588 (print); 1742-6596 (online)

A. A., Manea and A. R., Radzi and R. A., Rahman and A. T., Haron (2021) Strategies for virtual teams in construction: Easiness-effectiveness analysis. In: IOP Conference Series: Earth and Environmental Science, International Conference of Sustainable Earth Resources Engineering 2020 , 19 June 2020 , Virtual Confoncerence, Universiti Malaysia Pahang, Malaysia. pp. 1-12., 641 (012009). ISSN 1755-1307

A. A., Qasem and M. A., Al-Mekhlafi and F. M., Yahaya (2021) The effect of palm oil fuel clinker powder and cockleshell powder as cement replacement on durability properties of the concrete mortar. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682 (012037). ISSN 1755-1307

A. A., Razak and Zafri Azran, Abdul Majid and F., Basrawi and A. F., Sharol and M. H., Ruslan and K., Sopian (2019) A performance and technoeconomic study of different geometrical designs of compact single-pass cross-matrix solar air collector with square-tube absorbers. Solar Energy, 178. 314 - 330. ISSN 0038-092X. (Published)

A. A. M., Redhwan and W. H., Azmi and Nurul Nadia, Mohd Zawawi and M. Z., Sharif and R., Mamat (2018) Sonication Time Effect towards Stability of Al2O3/PAG and SiO2/PAG Nanolubricants. Journal of Mechanical Engineering, SI 5 (1). pp. 14-27. ISSN 1823-5514. (Published)

A. F., Sharol and Amir, Abdul Razak and Z. A. A., Majid and M. A. A., Azmi and M. A. S. M., Tarminzi (2019) Performance of force circulation cross-matrix absorber solar heater integrated with latent heat energy storage material. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012107). ISSN 1757-899X

A. Fahmi Huwaidi, M. Noor and Nasrul Hadi, Johari (2022) Brief review on recent technology in particle image velocimetry studies on hemodynamics in carotid artery. In: Human Engineering Symposium, HUMENS 2021 , 22 February 2021 - 22 February 2021 , Virtual Online. pp. 267-277. (266559). ISSN 21954356 ISBN 9789811641145

A. Fahmi Huwaidi, M. Noor and Nasrul Hadi, Johari (2022) Modeling the effect of different locations of carotid atherosclerosis on hemodynamics parameters. In: 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual Online. pp. 615-627., 882. ISSN 1876-1100 ISBN 9789811915772

A. H., Fauzi and M. Z., Sulaiman (2023) Effect of air filter pressure on fuel consumption and cost of gas turbine in Southern Power Generation, Malaysia. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 655 -667.. ISSN 2195-4356 ISBN 978-981191456-0

A. H., Hazrin and Z., Maryam and A., Hizrri and Norhidayah, Abdull and Niza, Samsuddin and M. A., Mohd Shukri (2017) Occupancy implications on Indoor Air Quality (IAQ) in selected primary school classrooms around Kuantan, Pahang. Malaysian Journal of Public Health Medicine, Special (1). pp. 94-105. ISSN 1675-0306. (Published)

A. H., Sufian and A. S., Jamaludin and A. N., Ibrahim and M. N., Mhd Razali and M. S., Osman and S. B., Hamzah (2019) Tyre Safety Performance on Asphalt Pavement in Malaysia Climate - Analysis through Finite Element Method. Journal of the Society of Automotive Engineers Malaysia, 3 (3). pp. 236-245. ISSN 2600-8092(Printed); 2550-2239(Online). (Published)

A. I., Yahaya and S. A., Che Ghani and Daing Mohamad Nafiz, Daing Idris and M. A., Aziz (2023) End-mill carbide tool wear in machining metallic biomaterial. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 783 -792.. ISSN 2195-4356 ISBN 978-981191456-0

A. K., Alakhali and F. M., Yahaya and M. A., Almalik (2021) Effects of crumb rubber at different sizes in asphalt mixtures on mechanical properties. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-10., 682 (012028). ISSN 1755-1307

A. K. M., Kafi and Alim, Samiul and Rajan, Jose and M. M., Yusoff (2019) Hemoglobin Immobilization on multiporous nanofibers of SnO2 and chitosan composite for hydrogen peroxide sensing. Journal of Nanoscience and Nanotechnology, 19 (4). pp. 2027-2033. ISSN 1533-4880 (Print); 1533-4899 (Online). (Published)

A. K. M., Kafi and Rajan, Jose and M. M., Yusoff and Samiul, Alim (2019) Application of polymerized multiporous nanofiber of SnO2 for designing a bienzyme glucose biosensor based on HRP/GOx. International Journal of Biological Macromolecules, 123. pp. 1028-1034. (Published)

A. K. M., Kafi and Samiul, Alim and Rajan, Jose and M. M., Yusoff (2018) A redox protein immobilization on multiporous nanofibers of SnO2 for improvement of sensing. In: The 4th Edition Of Nanotech France 2018 International Conference And Exhibition , 27 - 29 Jun 2018 , Pôle Universitaire Léonard de Vinci, Paris, France. pp. 1-18.. (Unpublished)

A. M., Aizzuddin and Danial Shafiq, Mohd Rashid and Mohd Yusof, Taib and Wan Azmi, Wan Hamzah (2022) Simulation of the ground heat exchanger under malaysian environment based on different thermal conductivity of soil and pipe materials. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 155..

A. M., Faten Albtoush and S. I., Doh and R. A., Rahman and A. H., Al-Momani (2022) Critical success factors of construction projects in Jordan : An empirical investigation. Asian Journal of Civil Engineering, 23 (7). pp. 1087-1099. ISSN 1563-0854. (Published)

A. R., Razali and C. T., Ann and A. F., Ahmad and Nazrul Idzham, Kasim (2017) Finite element structural analysis of a low energy micro sheet forming machine concept design. In: Mechanical Engineering Science And Technology 2017 , 19-20 April 2017 , Politeknik Metro, Johor Bahru. pp. 1-6., 203 (1). ISSN 17578981 (Unpublished)

A. R., Yusoff and Z., Ghazalli and Hazami, Che Hussain (2009) Determining Optimum EDM Parameters in Drilling a Small Hole by Taguchi Method. International Journal of Manufacturing Technology and Management, 17 (4). pp. 345-352. ISSN 1368-2148. (Published)

A. R., Zul Rasyied and N. N., Mazlee and M. R., Salim and Hadi, Manap and S., Nurulain (2018) The potential development of oxygen optical fibre gas sensor for automotive industry. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-3). pp. 1-4. ISSN 2180-1843. (Published)

A. S. N., Amirah and F. Y., Boon and K. A., Nihla and Z. M., Salwa and A. W., Mahyun and N., Yaacof (2021) Numerical simulation of flow within a storage area of HDPE modular pavement. In: IOP Conference Series: Earth and Environmental Science, 4th International Conference on Civil and Environmental Engineering (CENVIRON 2021) , 9 December 2021 , Penang, Malaysia. pp. 1-8., 920 (012044). ISSN 1755-1307

A. T., Rakhymova and Ahmedov, Anvarjon A. and K. M., Shapen (2021) Determination of trigonometric Fourier’s series by the method of four-dimensional mathematics. In: Journal of Physics: Conference Series, Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 28-29 July 2021 , Kuantan, Pahang, Malaysia. pp. 1-13., 1988 (012027). ISSN 1742-6588

AL-japairai, Khater Ahmed Saeed and Hamed Almurisi, Samah and Almonem Doolaanea, Abd and Syed, Mahmood and Alheibshy, Fawaz and Alobaida, Ahmed and Nadiya, Abdul-Halim and Chatterjee, Bappaditya (2023) A review on taste masked multiparticulate dosage forms for paediatric for tenacity and toughness improvement. International Journal of Pharmaceutics, 632 (122571). pp. 1-16. ISSN 0378-5173. (Published)

Aaron, Kong Chak Ho (2019) Electroporation of lignocellulosic biomass. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Abbas, Abdul Wahab and Mohd Azri Hizami, Rasid (2020) Characterization of brushed DC motor with brush fault using thermal assessment. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30-31 July 2019 , Kuantan. pp. 1-10., 788 (012095). ISSN 1757-8981

Abd Anasghaneem, Abd Aziz and Juliawati, Alias (2022) Performance of graphene as the corrosion inhibitor of magnesium alloy for automotive application. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 218..

Abd Manaf, Intan Shafinaz and Cheong, Jiun Yi and Ab. Rahim, Mohd Hasbi and Maniam, Gaanty Pragas (2019) Utilization of waste fish bone as catalyst in transesterification of RBD palm oil. Materials Today: Proceedings 19 (2019) 1294–1302, 19 (1). pp. 1294-1302. (Published)

Abd Rahman, Haji Safie (2021) Kunjungan Hormat delegasi UMP bertemu Ketua Polis Negara. UMP News .

Abd Rahman, Haji Safie (2021) UMP delegation meets Inspector-General of Police. UMP News .

Abdalla, Ahmed N. and Jing, Wang and Nazir, Muhammad Shahzad and Jiang, Mingxing Xin and Tao, Hao (2022) Socio-economic impacts of solar energy technologies for sustainable green energy: A review. Environment, Development and Sustainability, Ahead of print. pp. 1-38. ISSN 1387-585X. (Published)

Abdalla, Ahmed N. and Keream, Settar S. and Ibrahim, Thamir K. and Tao, Hai (2016) Adaptive Dynamic Inverse Controller for Advanced Coupled Tank Liquid Levels System. In: The 5th International Conference on Computer Science and Computational Mathematics (ICCSCM 2016) , 5-6 May 2016 , Langkawi, Malaysia. pp. 1-6..

Abdalrhman Alhaj, Nura and Mohd Faizal, Jamlos and Sulastri, Abdul Manap and Abdelsalam, Samah and Ahmed Bakhit, Abdelmoneim and Rizalman, Mamat and Mohd Aminudin, Jamlos and Mohammed Gismalla, Mohammed Salih and Hamdan, Mosab (2023) Integration of hybrid networks, AI, Ultra Massive-MIMO, THz frequency, and FBMC modulation toward 6g requirements : A Review. IEEE Access, 12. pp. 483-513. ISSN 2169-3536. (Published)

Abdel Rahman Mohamed Ismail, Farouk Abdel Mageed Rady (2021) Analyzing the cost-effectiveness of enhancement approaches for rehabilitating water distribution network. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahman, Abdul Rahimi).

Abdelrahman, M. Farouk and Rahimi, A. Rahman and Noor Suraya, Romali (2021) Economic analysis of rehabilitation approaches for water distribution networks: comparative study between Egypt and Malaysia. Journal of Engineering, Design and Technology, 19 (5). pp. 1-20. ISSN 1726-0531. (Published)

Abdul Adam, Abdullah and Raja Allen Jordan Izzuddin Shah, Raja Baharudin (2014) AEC Pengerak Industri Automotif. CREATE . pp. 26-27. ISSN 1823-7487

Abdul Akram Azfar, Abd Fadzir (2022) Modelling Study Ol High-Current Density Chlorophyll-Based Dyesensitized Solar Cell. College of Engineering, Universiti Malaysia Pahang.

Abdul Aziz, Mohd Azoddein and Mazrul Nizam, Abu Seman and Wan Mohd Hafizuddin, Wan Yussof and Mariah, Che Mamat and Mohamad, Drani (2017) Hydrogen Sulphide (H2S) Awareness Training for Process 3 Services Solution Sdn Bhd. In: 4th National Conference On Knowledge Transfer (NCKT'17) , 11-12 December 2017 , UUM Sintok, Kedah. pp. 1-6..

Abdul Faizal, Abd Halim (2008) Simulation test of disc brake functionality using computer aided engineering software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hadi, Mohd Hanif and Mohd Shawal, Jadin and Norizam, Sulaiman and Airul Sharizli, Abdullah and Jun, Lee Woan (2022) Improving the effect of non-uniform thermal distribution and electrical mismatch for PV Panel during partial shading condition. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 1067-1080., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6

Abdul Hafiz, Mohd Idzhan (2016) Water lever measure and control using ultrasonic sensor. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Abdul Haleem Habeeb, Mohamed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Anwar, P. P. Abdul Majeed and Mohamed Heerwan, Peeie and Choong, Chun Sern and Baarath, Kunjunni (2021) Rain classification for autonomous vehicle navigation using machine learning. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Universiti Malaysia Pahang (Virtual). pp. 895-903., 730. ISBN 978-981334596-6

Abdul Halim, Abdul Razik and Roziah, Zailan and Elkamel, Marwen and Elkamel, Ali (2022) Multi-product productions from malaysian oil palm Empty Fruit Bunch (EFB) : Selection for optimal process and transportation mode. Resources, 11 (67). pp. 1-31. ISSN 2079-9276. (Published)

Abdul Hamid, Nor Hasnul Azirah and Husain, Fazlin Marini and Ismail, Najiahtul Syafiqah and Mokhtar, Mazita (2023) An exploratory study of private companies in Malaysia: critical success factors for enterprise IT risk management. In: Terengganu Multidisciplinary International Conference (TeMIC 2023) , 30-31 October 2023 , Permai Hotel, Kuala Terengganu. pp. 268-273.. ISBN 9789672592013

Abdul Muiz, Hasim (2023) Cracking behaviour of coal ash concrete based on acoustic emission technique. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdul Nasir, Abd Ghafar (2024) Penyertaan program AI untuk Rakyat harus disebarluaskan. Berita Harian .

Abdul Nasir, Abd Ghafar and Nadarajah, Devin Babu and Muhammad Hafizuddin, Abd Latiff and Muhammad Lutfir Rahman, Ahmad Safuan (2021) Prosthetic robotic arm with patient monitoring system for children. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Abdul Rahman, Ahmad (2017) Mobiliti Hijau Alam UMP bersama masyarakat Jawa Barat. UMP News . (Unpublished)

Abdul Rahman, Ahmad (2015) More successful feats by UMP undergrads at the international scene. Quest, 13 (10). p. 12. ISSN 1985-8159

Abdul Rahman, Ahmad (2013) Pelajar raih 6 pingat emas dan 3 Anugerah Khas dalam i-ENVEX. CREATE . p. 31. ISSN 1823-7487

Abdul Rahman, Aida Syafiqah and Fizal, Ahmad Noor Syimir and Khalil, Nor Afifah and Ahmad Yahaya, Ahmad Naim and Md. Sohrab, Hossain and Zulkifli, Muzafar (2023) Fabrication and characterization of magnetic cellulose–chitosan–alginate composite hydrogel bead bio-sorbent. Polymers, 15 (2494). pp. 1-14. ISSN 2073-4360. (Published)

Abdul Rahman, R. N. U. and Ruwaida, A. R. and Ismail, M. (2019) Effect of temperature and residence time on the characteristics of torrefied food. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-11., 702 (1). ISSN 1757-8981

Abdul Razak, Raaff and Amin Ridzuan, Ishak (2017) UMP diminta tumpu teknologi kereta api. Berita Harian . p. 2.

Abdul Sahli, Fakharudin and Md Nasir, Sulaiman and Jailani, Salihon and Norazwina, Zainol (2013) Implementing artificial neural networks and genetic algorithms to solve modeling and optimisation of biogas production. In: Proceedings of the 4th International Conference on Computing and Informatics (ICOCI 2013) , 28-30 August 2013 , Kuching, Sarawak. pp. 121-126. (088).

Abdul Shukor Lim, Nor Hasanah and Samadi, Mostafa and Shafegat, Arezou and Nur Farhayu, Ariffin and Keyvanfar, Ali and Mohd. Sam, Abdul Rahman (2016) Effect of Homogenous Ceramic Waste on Drying Shrinkage of Mortar. Journal of Environmental Treatment Techniques , 4 (4). pp. 149-152. ISSN 2309-1185 . (Published)

Abdul Syukor, Abd Razak (2021) The performance of Pisoptera in eliminating termite and how it help in managing solid waste. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Abdul Wahab, Muhammad Nubli and Kassim, Hafizoah and Abdul Aziz, Nawawi (2007) Developing safety aptitude measurement tool for contract workers during turnaround operation in petrochemical plants in Gebeng. , [Research Report: Research Report] (Unpublished)

Abdullah, Ibrahim and Siti Aishah, Md Hasan (2015) The Development of the Malaysian Technology Content Framework towards the Establishment of the Malaysian Technology Index in Manufacturing Industry. In: International Conference on Recent Trends in Engineering Science and Management (ICRTESM-2015) , 14-16 March 2015 , New Delhi. . (Unpublished)

Abdullah, N. H. and Mohamed, M. and Mohd Shohaimi, N. A. and Lazim, A. M. and Abdul Halim, A. Z. and Mohd Shukri, N. and Abdul Razab, M. K. A. (2021) Enhancing the decolorization of methylene blue using a low-cost super-absorbent aided by response surface methodology. Molecules, 26 (15). pp. 1-14. ISSN 1420-3049. (Published)

Abdullah, Nasser and Hujainah, Fadhl and Al-Sewari, Abdulrahman A. and Kamal Z., Zamli (2020) An Improved Jaya Algorithm-Based Strategy for T-Way Test Suite Generation. In: Emerging Trends in Intelligent Computing and Informatics. IRICT 2019 , 22-23 September 2019 , Johor Bahru, Johor, Malaysia. pp. 352-361., 1073. ISBN 978-3-030-33582-3

Abdullah, Nayeema and Jun Haslinda, Shariffuddin and Mohd Faizal, Ali (2022) Waste cooking palm oil as sustainable material for polysulfide synthesis : Characterization as a crosslinker for inverse vulcanization. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 143..

Abdullah Adnan, Mohamed and Amy Zulaikha, Mohd Ali and Wan Jumani, Fauzi (2022) UMP perkenalkan budaya Malaysia kepada pelajar luar negara melalui jendela maya. UMP News .

Abdullah Adnan, Mohamed and Haslinda, Hashim (2014) Belia sebagai ahli masyarakat komunikasi digital. Program Pemindahan Ilmu Transformasi Belia (Trans-B), Universiti Malaysia Pahang.

Abdullah Omar Abdullah, Baqadeem and Khairil Azman, Masri (2023) Fibers in asphalt mixture : A state-of-the-art review. Construction, 3 (1). pp. 115-122. ISSN 2785-8731. (Published)

Abdullayeva, Cholpon and Turdueva, Begimai and Ahmedov, Anvarjon A. (2021) On the spectral properties of the differential operators with involution. In: Journal of Physics: Conference Series, Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 28-29 July 2021 , Kuantan, Pahang, Malaysia. pp. 1-5., 1988. ISSN 1742-6588

Abdulmajeed Ali Mohammed, Nasser Al-Hokabi (2022) Performance of soft clay stabilized with the replacement of palm oil fuel ash and gypsum. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muzamir, Hasan).

Abed, Amir Hameed and Alwan, Natheer and Abed, Munther Hameed and Dobrić, Goran (2023) Efficiency of post-processing in PMU based state estimation of renewable energy microgrids. In: 2023 IEEE Belgrade PowerTech, PowerTech 2023 , 25-29 June 2023 , Belgrade. pp. 1-6.. ISBN 978-166548778-8

Abed, Munther Hameed and Mohd Nizam Mohmad, Kahar (2022) Guided genetic algorithm for solving unrelated parallel machine scheduling problem with additional resources. Indonesian Journal of Electrical Engineering and Computer Science, 26 (2). pp. 1036-1049. ISSN 2502-4752. (Published)

Abed, S. A. and Aljanabi, M. and Ameer, N. H. A. and Ismail, M. A. and Kasim, S. and Hassan, R. and Sutikno, T. (2021) Application of the Jaya algorithm to solve the optimal reliability allocation for reduction oxygen supply system of a spacecraft. Indonesian Journal of Electrical Engineering and Computer Science, 24 (2). pp. 1202-1211. ISSN 2502-4752. (Published)

Abobakr Busaeed, Raed Abdullah and Wan Isni Sofiah, Wan Din and Waseem, Quadri and Azlee, Zabidi (2023) Taxonomy of SQL Injection: ML Trends & Open Challenges. In: 2023 IEEE 8th International Conference On Software Engineering and Computer Systems (ICSECS) , 25-27 August 2023 , Penang, Malaysia. pp. 382-387.. ISBN 979-8-3503-1094-8

Abu Jafar, Md Muzahid and Syafiq Fauzi, Kamarulzaman and Rahman, Md Arafatur and Murad, Saydul Akbar and Kamal, Md Abdus Samad and Alenezi, Ali H. (2023) Multiple vehicle cooperation and collision avoidance in automated vehicles : Survey and an AI‑enabled conceptual framework. Scientific Reports, 13 (603). pp. 1-27. ISSN 2045-2322. (Published)

Abu Jafar, Md Muzahid and Syafiq Fauzi, Kamarulzaman and Rahman, Md. Arafatur and Alenezi, Ali H. (2022) Deep reinforcement learning based driving strategy for avoidance of chain collisions and its safety efficiency analysis in autonomous vehicles. IEEE Access, 4. pp. 1-18. ISSN 2169-3536. (Published)

Abu Shadate, Faisal Mahamude (2022) Performance investigation of solar collector with cotton-based cnc and graphene hybrid nano fluids. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Sharuzi, Wan Harun).

Abu-Samah, Asma and Knopp, Jennifer Launa and Normy Norfiza, Abdul Razak and Athirah, Abdul Razak and Ummu Kulthum, Jamaludin and Fatanah, M. Suhaimi and Azrina, Md Ralib and Mohd Basri, Mat Nor and Chase, J. Geoffrey and Pretty, Christopher G. (2019) Model-based glycemic control in a Malaysian intensive care unit: Performance and safety study. Medical Devices: Evidence and Research, 12. pp. 215-226. ISSN 1179-1470. (Published)

Adam, Khalid and Izzeldin, I. Mohd and Ibrahim, Younis (2021) A selective mitigation technique of soft errors for DNN models used in healthcare applications: DenseNet201 case study. IEEE Access, 9 (9419032). 65803 -65823. ISSN 2169-3536. (Published)

Adam Ismail Hammad, Khalid and Mohamed Abdelaziz, Izzeldin Ibrahim and Younis, Younis M. (2021) The impact of the soft errors in convolutional neural network on GPUS: Alexnet as case study. Procedia Computer Science, 182. pp. 89-94. ISSN 1877-0509. (Published)

Adam Shariff Adli, Aminuddin and Ku Muhammad Naim, Ku Khalif and Fadhilah, Che Jamil and Nur Izzati, Jaini (2019) Fuzzy analytic hierarchy process using intuitive vectorial centroid for eco-friendly car selection. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019) , 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 1366 (012076). ISSN 1742-6596

Addie Irawan, Hashim and Ai, Chern Lim (2013) Polystyrene Foam-Based Leg Tip Strider Robot. In: Proceeding of 2nd International Conference on Electrical, Control and Computer Engineering (inECCE 2013) , 27 -28 August 2013 , MS Garden Hotel, Kuantan. pp. 143-146..

Addie Irawan, Hashim and Alam, Md. Moktadir (2015) Adaptive Impedance Control Based on CoM for Hexapod Robot Walking on the Bottom of Ocean. In: The 5th International Conference On Underwater System Technology (USYS'14) , 3-4 December 2014 , Melaka. .

Addie Irawan, Hashim and Mohd Iskandar Putra, Azahar and Pebrianti, Dwi (2022) Interaction Motion Control on Tri-finger Pneumatic Grasper using Variable Convergence Rate Prescribed Performance Impedance Control with Pressure-based Force Estimator. Journal of Robotics and Control (JRC), 3 (5). pp. 716-724. ISSN 2715-5072. (Published)

Addie Irawan, Hashim and et, al. (2015) Proceeding of Colloquium on Robotics, Unmanned Systems and Cybernetics 2014. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang, Malaysia. ISBN 978-967-0691-42-8

Addila, Abu Bakar (2018) Design, synthesis of flavokawain b derivative and their cytotoxic effects on MCF-7 and MDA-MB-231 cell lines. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Akhtar, Muhammad Nadeem).

Adham, Ali A. J. and Razman, Mat Tahar (2012) Enhancing efficiency of automobile assembly line using the Fuzzy logical and Multi-objective Genetic Algorithm. In: IEEE International Conference on Fuzzy Systems (FUZZ 2012) , 10-15 June 2012 , Brisbane, QLD, Australia. pp. 1-7.. ISBN 978-1-4673-1506-7

Adhikary, Apurba and Bhuiya, Joy and Murad, Saydul Akbar and Hossain, Md. Bipul and Aslam Uddin, K. M. and Faysal, MD Estihad and Rahaman, Abidur and Bairagi, Anupam Kumar (2022) Performance evaluation of micro lens arrays: Improvement of light intensity and efficiency of white organic light emitting diodes. PLoS ONE, 17 (5). pp. 1-28. ISSN 1932-6203. (Published)

Adhikary, Apurba and Murad, Saydul Akbar and Munir, Md Shirajum and Choong Seon, Hong Seong (2022) Edge assisted crime prediction and evaluation framework for machine learning algorithms. In: International Conference on Information Networking; 36th International Conference on Information Networking, ICOIN 2022 , 12-15 January 2022 , Virtual, Jeju Island. pp. 417-422., 2022 (176661). ISSN 1976-7684 ISBN 978-166541332-9

Adhwa Wirdany, Abdul Razak and Saidatul Shima, Jamari (2022) Biodegradability effects on the PHA/NFC nanocomposite. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 207..

Adil, M. Osman and Nour, Abdurahman Hamid and Noormazlinah, Ahmad (2023) A review study on the potential of microalgae biomass producing biopolymer material. Current Science and Technology (CST), 2 (2). pp. 49-55. ISSN 2785-8804. (Published)

Afiq Anwar, Akmal (2022) State Of Charge Estimation Of Battery Management System. College of Engineering, Universiti Malaysia Pahang.

Afiq Ikhwan, Mohd Fauzi and Mohd Zamri, Ibrahim and Muhammad Salihin, Saealal (2022) Estimation of volume and weight of apple by using 2D contactless computer vision measuring method. In: International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022 , 16-18 November 2022 , Male. pp. 1-6. (185686). ISBN 978-166547095-7

Afiqah, R. Radzi and Hashim, R. Bokhari and Abdul Rahimi, Abdul Rahman and K. Ayer, Steven (2019) Key Attributes of Change Agents for Successful Technology Adoptions in Construction Companies: A Thematic Analysis. ASCE International Conference on Computing in Civil Engineering 2019. pp. 430-437. (Published)

Afiqah R., Radzi and Abdul Rahimi, Abdul Rahman and Almutairi, Saud (2022) Modeling COVID-19 impacts and response strategies in the construction industry: PLS–SEM approach. International Journal of Environmental Research and Public Health, 19 (9). pp. 1-25. ISSN 1661-7827. (Published)

Afiqah R., Radzi and Nur Farhana, Azmi and Syahrul Nizam, Kamaruzzaman and Abdul Rahimi, Abdul Rahman and Papadonikolaki, Eleni (2023) Relationship between digital twin and building information modeling : A systematic review and future directions. Construction Innovation, ahead-of-print. pp. 1-19. ISSN 1471-4175. (In Press / Online First) (In Press / Online First)

Afkar Rabbani Hidayatullah, Hipeni and Intan Syahiera, Azli and Khairatun Najwa, Mohd Amin (2021) Biodegradability of cellulose nanocrystal/thermoplastic polyurethane nanocomposite. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Afkar Rabbani Hidayatullah, Hipeni and T’ng, J.W. and N., Hashim and Nur Shuhada, Jasmi Shah and Khairatun Najwa, Mohd Amin (2022) Variation of nanocellulose reinforced recycled paper : Effect on tensile strength. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 153..

Afnan Azzahra, Ahmad Kamal and Suhaimi, Mohamad and Mardawani, Mohamad and Rizki, Wannahari and Ahmad Ziad, Sulaiman and Azilah, Ajit and Lim, Jun-Wei and Nurul Akmar, Che Zaudin (2021) Extraction of gallic acid from chromolaena sp. using ultrasound-assisted extraction. Engineering Journal, 25 (2). pp. 269-276. ISSN 0125-8281. (Published)

Afrig, Aminuddin and Ernawan, Ferda (2023) AuSR3: A new block mapping technique for image authentication and self-recovery to avoid the tamper coincidence problem. Journal of King Saud University - Computer and Information Sciences, 35 (9). ISSN 1319-1578. (Published)

Afrouzeh, Mohsen and Konukman, Ferman and Musa, Rabiu Muazu and Suppiah, Pathmanathan K. and Abdul Majeed, Anwar P. P. and Mohd Azraai, Mohd Razman (2022) Kinematic variables defining performance of basketball free-throw in novice children : An information gain and logistic regression analysis. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 949-956., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Agi, Augustine and Oseh, Jeffrey O. and Gbadamosi, Afeez and Fung, Cheo Kiew and Junin, Radzuan and Jaafar, Mohd Zaidi (2023) Performance evaluation of nanosilica derived from agro-waste as lost circulation agent in water-based mud. Petroleum Research, 8 (2). pp. 256-269. ISSN 2096-2495. (Published)

Ahamed, Nizam Uddin and Rahman, Matiur and Alqahtani, Mahdi and Altwijri, Omar and Sundaraj, Kenneth and Ahmed, Nasim (2015) Relationship between EMG Activity and Endurance Time in the Biceps Brachii Muscle during Isokinetic Contraction. In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2014) , 23-25 November 2014 , Copthorne Hotel, Cameron Highland, Malaysia. pp. 1-7.. (In Press / Online First)

Ahamed, Nizam Uddin and Zulkifli, Md. Yusof and Al-Mamun, Md. Abdullah and Rahman, S. A. M. Matiur and Ahmed, Nasim and Hassnawi, L. A. (2015) Automatic Car Parking and Controlling System Using Programmable Logic Controller (PLC). International Journal of Applied Engineering Research (IJAER), 10 (1). pp. 69-75. ISSN 0973-4562 (print); 1087-1090 (online). (Published)

Ahmad, Anwar and Ghufran, Rumana and Nasir, Qazi and Shahitha, Fathima and Al-Sibani, Mohammed and Al-Rahbi, Amal (2023) Enhanced anaerobic co-digestion of food waste and solid poultry slaughterhouse waste using fixed bed digester : Performance and energy recovery. Environmental Technology and Innovation, 30 (103099). pp. 1-15. ISSN 2352-1864. (Published)

Ahmad, Ibrahim and Hafizoah, Kassim (2012) CMLHS researchers shine at CITREX 2012. Ilham, 9 . p. 1. ISSN 1985-157X

Ahmad, Iftikhar and Zahoor Raja, Muhammad Asif and Bilal, Muhammad and Ashraf, Farooq (2017) Neural network methods to solve the Lane–Emden type equations arising in thermodynamic studies of the spherical gas cloud model. Neural Computing and Applications, 28. pp. 929-944. ISSN 0941-0643. (Published)

Ahmad, Omar and Muhammad Nubli, Abdul Wahab (2022) Kajian Penggunaan Permainan Puzzle dan Latihan Biofeedback Dalam Meningkatkan Prestasi Matematik Pelajar Sekolah Rendah. Sains Insani, 7 (2). pp. 31-39. ISSN 0127-7871. (Published)

Ahmad, Othman (2012) A study on the management system in the healthcare sector using service quality concept. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad, Othman and Yao, Liu and Omar, R. Mahdi and Jing, Wang (2011) A novel statistical model assessing the self performance of knowledge management within SMEs in China. Procedia Engineering, 15. pp. 1758-1763. ISSN 1877-7058. (Published)

Ahmad, Tanvir and Nor Syahidatul Nadiah, Ismail and Abdullah, Mat Safri and Rahman, Md. Arafatur and Beg, Mohammad Sojon and Bakhtiar, M. Taher (2023) SDN Enabled Big Data Analytics and Framework for Sensor Data of Vehicle Health, Safety and Monitoring System. In: 2023 IEEE 8th International Conference On Software Engineering and Computer Systems (ICSECS) , 25-27 August 2023 , Penang, Malaysia. pp. 117-121.. ISBN 979-8-3503-1094-8

Ahmad, Tanvir and Nor Syahidatul Nadiah, Ismail and Rahman, Md. Arafatur and Waseem, Quadri and Abdullah, Mat Safri (2023) Hop Restricted-AODV (HR-AODV) Routing and Its Applicability on Different Wireless Channels for Vehicular Network. In: 2023 IEEE 8th International Conference On Software Engineering and Computer Systems (ICSECS) , 25-27 August 2023 , Penang, Malaysia. pp. 1-6.. ISBN 979-8-3503-1094-8

Ahmad Affendi, Hashim (2015) An improved legibility guideline for text in web pages. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Majid, Mazlina).

Ahmad Affendi, Hashim and Mazlina, Abdul Majid (2012) Guidelines and Assessment Tool for Making Web Text Legible on Full High Definition Display. In: Proceedings of the First International Conference on Computational Science and Information Management (ICoCSIM2012) , 3-5 December 2012 , Toba Lake, North Sumatra, Indonesia. pp. 55-58., 1. ISBN 978-967-0120-60-7

Ahmad Afif, Ahmarofi and Razamin, Ramli and Norhaslinda, Zainal Abidin and Jastini, Mohd Jamil and Izwan Nizal, Shaharanee (2020) Variations in the number of hidden nodes through multilayer perceptron networks to predict cycle time. Journal of ICT, 19 (1). pp. 1-19. ISSN 2180-3862. (Published)

Ahmad Amirul Faiz, Ahmad Tajudin (2016) Kerjasama erat UMP dan Yamaguchi University. UMP News . (Unpublished)

Ahmad Ashraf, Abdul Halim and Veeraperumal, Vijayasarveswari and Andrew, Allan Melvin and Mohd Najib, Mohd Yasin and Mohd Zamri Zahir, Ahmad and Hossain, Kabir and Bari, Bifta Sama and Fatinnabila, Kamal (2023) UWB-based early breast cancer existence prediction using artificial intelligence for large data set. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 81-90. ISSN 2462-1943. (Published)

Ahmad Azahari, Hamzah and Yasmin, Abdul Wahab and Ruzairi, Abdul Rahim and Farah Aina, Mohamad Jamal and Suzanna, Ridzuan Aw and Mohd Hafiz Fazalul, Rahiman and Pusppanathan, Jaysuman and Nasarudin, Ahmad and Mohamad Shukri, Abdul Manaf and San, Chan Kok and Green, Robert Garnett and Nur Arina Hazwani, Samsun Zaini and Ahmad Ridhwan, Wahap (2022) Investigation of solid velocity measurement using single-plane versus dual-plane of electrical capacitance tomography for coal power plant application. In: Lecture Notes in Electrical Engineering; 3rd International Conference on Control, Instrumentation and Mechatronics Engineering, CIM 2022 , 2-3 March 2022 , Virtual, Online. 752 -769., 921 LNEE (280399). ISSN 1876-1100 ISBN 978-981193922-8

Ahmad Azwan, Abdul Razak and Ahmad Nor Kasruddin, Nasir (2022) Gradient-based mutation manta ray foraging optimization (gbm-mrfo) for solving constrained real-world problems. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 122..

Ahmad Azwan, Abdul Razak and Ahmad Nor Kasruddin, Nasir and Nor Maniha, Abd Ghani (2022) Super-opposition spiral dynamic-based fuzzy control for an inverted pendulum system. Bulletin of Electrical Engineering and Informatics, 11 (5). pp. 2737-2745. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Ahmad Azwan, Abdul Razak and Ahmad Nor Kasruddin, Nasir and Nurul Amira, Mhd Rizal and Nor Maniha, Abd Ghani and Mohd Falfazli, Mat Jusof and Mohd Ashraf, Ahmad (2022) Quasi oppositional—Manta ray foraging optimization and its application to pid control of a pendulum system. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. 923- 935., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6

Ahmad Azzreen, Dalawi (2021) Analysis and study of powerefficient sar adc for active rfid sensor. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Samsuri, Fahmi).

Ahmad Bukhari, Abdullah (2015) Breast cancer detector software (BCDS) using case-based reasoning. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Ahmad Fadzil, Sharol and Amir, Abdul Razak and Zafri Azran, Abdul Majid and Ahmad, Fudholi (2019) Experimental study on performance of square tube absorber with phase change material. International Journal of Energy Research, 44 (2). pp. 1000-1011. ISSN 0363-907X (print); 1099-114X (online). (Published)

Ahmad Fadzil, Sharol and Amir, Abdul Razak and Zafri Azran, Abdul Majid and Muhammad Amirul Azwan, Azmi and Muhammad Amir Syahiran, Muhammad Tarminzi (2020) Evaluation on the Performance of Cross-Matrix Absorber Double-Pass Solar Air Heater (CMA-DPSAH) with and without Thermal Energy Storage Material. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (2). pp. 37-49. ISSN 2289-7879. (Published)

Ahmad Faizrin, Ahmad Fuzlin (2023) Study on the ionic conduction properties of alginate based biopolymer electrolytes and its potential application in electrical double-layer capacitor. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Salihin, Samsudin).

Ahmad Faizrin, Ahmad Fuzlin and Ahmad Salihin, Samsudin (2022) Review on provision of solid-state polymer electrolytes for electrochemical energy storage devices. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 144..

Ahmad Faizrin, Fuzlin and Izan Izwan, Misnon and Nagao, Yuki and Ahmad Salihin, Samsudin (2021) Study on ionic conduction of alginate bio-based polymer electrolytes by incorporating ionic liquid. In: Materials Today: Proceedings; 3rd Symposium on Industrial Science and Technology, SISTEC 2021 , 25 - 26 August 2021 , Kuantan, Pahang. pp. 1455-1459., 51. ISSN 2214-7853

Ahmad Farimin, Ahmad Osman and Ahmad Hafiz, Mohd Jamil and Shamsul, Zakaria (2022) Electromechanical performances of dual system PDMS dielectric elastomer. In: 2022 10th International Conference on Control, Mechatronics and Automation, ICCMA 2022 , 9-12 November 2022 , Luxembourg. pp. 31-35. (186083). ISBN 978-166549048-1

Ahmad Farimin, Ahmad Osman and Shamsul, Zakaria and Nur Syamimi, Ramlee and Nur Hanisah, Asri (2022) Bilayered polydimethylsiloxane (PDMS) composite for dielectric elastomer applications. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics & Material Forum 2022, iM3F 2022 , 20 July 2022 , Pekan. pp. 63-67., 75 (149158). ISSN 2214-7853

Ahmad Fikri Hadi, Abdul Rahman and Mazrul Nizam, Abu Seman (2018) Surface modification of polyethersulfone membrane via uv-grafting for forward osmosis technology = Modifikasi permukaan membran polyetersulfon melalui cantuman-uv untuk teknologi osmosis ke hadapan. Malaysian Journal of Analytical Sciences, 22 (3). pp. 542-552. ISSN 1394-2506. (Published)

Ahmad Fikri Hadi, Abdul Rahman and Siti Nudra Shafinie, Ab Aziz and Mazrul Nizam, Abu Seman (2020) Water flux prediction of UV-photografted nanofiltration membrane for forward osmosis application. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress 2019, ESChE 2019 , 17-19 July 2019 , Kuala Lumpur. pp. 1-8., 736 (022094). ISSN 1757-8981

Ahmad Fikri Hadi Abdul, Rahman and Mohd Yusri, Mohd Yunus and Tengku Siti Laila Maisarah, Tengku Ahmad Nasaruddin and Noorlisa, Harun and Mazrul Nizam, Abu Seman (2019) Performance profiling of UV-grafted forward osmosis polyethersulfone membrane using multivariate classical scaling technique. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012043). ISSN 1757-8981

Ahmad Firdaus, Zainal Abidin and Aldharhani, Ghassan Saleh and Zahian, Ismail and Mohd Faizal, Ab Razak (2022) The summer heat of cryptojacking season : Detecting cryptojacking using heatmap and fuzzy. In: International Conference on Cyber Resilience, ICCR 2022 , 6-7 October 2022 , Dubai. pp. 1-5. (185824). ISBN 978-166546122-1

Ahmad Firdaus, Zainal Abidin and Yew Khen, Yong and Mohd Faizal, Ab Razak and Wan Isni Sofiah, Wan Din and Mohd Zamri, Osman and Che Akmal, Che Yahaya (2021) Where is my organ? Organ donation with blockchain system. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Ahmad Imran, Mohd Thaim and Norazlianie, Sazali and Kadirgama, Kumaran and Ahmad Shahir, Jamaludin and Faiz, Mohd Turan and Norhaida, Ab. Razak (2023) Smart Glove for Sign Language Translation. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 80-87. ISSN 2289-7895. (Published)

Ahmad Irfan, Ikmal Hisham (2020) Utama daging tempatan mampu hapus kartel. Berita Harian .

Ahmad Kamal, Kunji (2019) A study on Malaysian roadside safety adopting safety recovery zone corridor concept. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kusbiantoro, Andri).

Ahmad Luqman, Nazrudin and Anis Farihan, Mat Raffei and Nur Shamsiah, Abdul Rahman (2021) Smart kitchen mobile based application with Arduino module features. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Ahmad Mahfuz, Gazali (2021) Covid-19 Vaccine Or Negative Test For Covid-19: A Glimpse Into The Future. CodeBlue Health is a Human Right . pp. 1-10.

Ahmad Mahfuz, Gazali (2021) Kenapa kita perlu tunggu selepas lengkap vaksin COVID 19. UMP News .

Ahmad Mahfuz, Gazali and Mohd Ashraf, Fauri (2020) Rebut manfaat positif sebalik impak pandemik COVID-19. Berita Harian .

Ahmad Muhaimin, Ismail and Muhammad Akmal, Remli and Yee Wen, Choon and Nurul Athirah, Nasarudin and Norsyahidatul Nazirah, Ismail and Mohd Arfian, Ismail and Mohd Saberi, Mohamad (2023) Artificial Bee Colony algorithm in estimating kinetic parameters for yeast fermentation pathway. Journal of integrative bioinformatics, 20 (2). pp. 1-8. ISSN 1613-4516. (Published)

Ahmad Muhddin Hidir, Othman (2015) Dual function mouse. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Ahmad Nasser, Mohd Rose and Mohd Fadzil Faisae, Ab. Rashid and Nik Mohd Zuki, Nik Mohamed and Muhammad Aiman Safwan, Jubri (2021) The implementation of lean manufacturing and ergonomics in small medium enterprise – Case study. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (012057). ISSN 1757-8981

Ahmad Nor Kasruddin, Nasir and Mohd Falfazli, Mat Jusof and Mohd Redzuan, Ahmad and Addie Irawan, Hashim (2022) Spiral-sooty tern optimization algorithm for dynamic modelling of a twin rotor system. In: Proceedings - 2022 Innovations in Intelligent Systems and Applications Conference, ASYU 2022 , 7-9 September 2022 , Antalya. pp. 1-6. (183936). ISBN 978-166548894-5

Ahmad Nor Kasruddin, Nasir and Mohd Falfazli, Mat Jusof and Mohd Redzuan, Ahmad and Ahmad Azwan, Abd Razak and Nor Maniha, Abdul Ghani (2023) Adaptive levy flight distribution algorithm for solving a dynamic model of an electric heater. In: 13th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2023 , 20-21 May 2023 , Penang. pp. 140-144.. ISBN 979-835034731-9

Ahmad Nor Kasruddin, Nasir and Mohd Falfazli, Mat Jusof and Nor Maniha, Abdul Ghani and Raja Mohd Taufika, Raja Ismail (2022) Opposition-sooty tern algorithm for fuzzy control optimization of an inverted pendulum system. In: Proceedings - 2022 Innovations in Intelligent Systems and Applications Conference, ASYU 2022 , 7-9 September 2022 , Antalya. pp. 1-5. (183936). ISBN 978-166548894-5

Ahmad Rasdan, Ismail (2010) Ergonomics Assessment Of Workstation Design In Automotive Industry. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Ahmad Rasdan, Ismail and S. N. A., Abdullah and Abdul Adam, Abdullah and B. M., Deros (2015) Whole-Body Vibration Exposure Of Malaysian Taxi Drivers. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2786-2792. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahmad Rasdan, Ismail and Shashi Kumar, S A Karagaratnan and K., Kadirgama (2013) Thermal Comfort Findings: Scenario At Malaysian Automotive Industry. Thermal Science, 17 (2). pp. 387-396. (Published)

Ahmad Rasdan, Ismail and Siti Nur Atikah, Abdullah and Ahmad Adam, Abdullah and Ab Hamid, Mohd Rashid and Baba, M. Deros (2015) Relationship between thermal comfort and driving performance among Malaysian bus driver. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7406-7411. ISSN 1819-6608. (Published)

Ahmad Raus, R. and Noor Suhana, Adzahar and Basri, D. F. and Latif, E. S. and Sallehudin, N. J. (2021) In vitro and in vivo cytotoxic effects of chlorella against various types of cancer. IIUM Medical Journal Malaysia, 20 (1). pp. 149-158. ISSN 2735-2285. (Published)

Ahmad Razlan, Yusoff (2021) UMP strategic relationship with cluster schools, Velionne Racing makes the country proud. UMP News .

Ahmad Razlan, Yusoff and Mimi Rabita, Abdul Wahit (2021) Hubungan strategik UMP dengan sekolah kluster, pasukan Velionne harumkan nama negara. UMP News .

Ahmad Razlan, Yusoff and Syh Kai, Lim (2019) Microstructure and mechanical properties of boron sheet metal steels in hot press forming process with nanofluid as coolant. In: Reference Module in Materials Science and Materials Engineering. Elsevier, pp. 1-15. ISBN 978-0-12-803581-8

Ahmad Ridhauddin, Abdul Rauf and Wan Hasbullah, Mohd Isa and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Mohd Hafiz, Arzmi and Abdul Majeed, Anwar P. P. (2022) The classification of oral squamous cell carcinoma (OSCC) by means of transfer learning. In: Lecture Notes in Networks and Systems; 9th International Conference on Robot Intelligence Technology and Applications, RiTA 2021 , 16-17 December 2021 , Daejeon. pp. 386-391., 429. ISBN 978-303097671-2

Ahmad Rosli, Abdul Manaf and Mohd Zairulnizam, Mohd Zawawi and Nik Zuraida, Imran Adly (2013) Thin Walled Part Warping Overcoming by Honeycomb Ribs Design. Advanced Materials Research, 903. pp. 181-186. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Ahmad Saifuddin, Othman (2020) Estimation of the long term dryness pattern for Pahang state using integrated SDSM-SPI model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Saifudin, Mohd Kamel (2012) Research Acculturation Grant Scheme (RAGS). Quest, 8 (5). p. 7. ISSN 1985-8159

Ahmad Salam, Farooqi and Siti Nur Fatihah, Adnan and Setiabudi, Herma Dina and Syed Anuar Faua’ad d, Sye Muhammad and Shahrul, Ismail and Aslam, Sameen and Bawadi, Abdullah (2023) Syngas production via bi-reforming of methane over fibrous KCC-1 stabilized ni catalyst. Topics in Catalysis, 66 (1-4). pp. 235-246. ISSN 1022-5528. (Published)

Ahmad Salihin, Samsudin (2017) Structural and ionic conduction study of enhanced bio-polymer electrolytes based carboxymethyl cellulose doped NH4Br. In: The 5th Annual Conference on Engineering and Information Technology , 27 - 29 March 2018 , Kyoto, Japan. pp. 1-2.. (Unpublished)

Ahmad Salihin, Samsudin and Izan Izwan, Misnon and Saifful Kamaluddin, Muzakir and Mohd Ikmar Nizam, Mohamad Isa and Mohd Fakhrul Zamani, Abdul Kadir (2019) Fundamental study on producing a favorable ionic mobility of PVA blends in cellulose-based polymer electrolytes via electrochemical analysis. , [Research Report: Research Report] (Unpublished)

Ahmad Shahrizan, Abdul Ghani (2018) Image contrast enhancement using an integration of recursive-overlapped contrast limited adaptive histogram specification and dual-image wavelet fusion for the high visibility of deep underwater image. Ocean Engineering, 162. pp. 224-238. ISSN 0029-8018. (Published)

Ahmad Shahrizan, Abdul Ghani and Ismail Mohd., Khairuddin and Muhammad Amirul, Abdullah and Ahmad Fakhri, Ab. Nasir and Jessnor Arif, Mat Jizat and Mohd. Azraai, Mohd. Razman and Muhammad Aizzat, Zakaria and Wan Hasbullah, Mat Isa and Anwar P. P., Abdul Majeed (2022) Enabling Industry 4.0 through Advances in Mechatronics. LNEE, 1 (1). Springer Singapore, Springer Link. ISBN 1876-1100

Ahmad Shahrizan, Abdul Ghani and Muhammad Daniel Naim, Zulkifflee (2022) Investigation on data acquisition accuracy for long range communication using RFM LoRa. In: 2022 8th International Conference on Control, Decision and Information Technologies, CoDIT 2022 , 17-20 May 2022 , Istanbul. pp. 320-325. (180591). ISBN 978-166549607-0

Ahmad Shukri, Mohd Noor and Auni, Che Fauzi and Ainul Azila, Che Fauzi and Noraziah, Ahmad and Mohamad Syauqi, Arifin (2022) An automate failure recovery for synchronous distributed database system. Indonesian Journal of Electrical Engineering and Computer Science, 28 (2). pp. 973-979. ISSN 2502-4752. (Published)

Ahmad Syafiq, Deraman and M. H., Hasbullah and Niirmel, Ranjanendran and Mujahid, Mohamad (2022) Study of trapezoidal flexible horizontal piezoelectric cantilever beam based on ANSYS. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 1187-1195., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6

Ahmad Syafiq, Deraman and Mohd Rusllim, Mohamed and Wan Ismail, Ibrahim and Leung, Puiki (2023) Flexible horizontal piezoelectric energy generator for sea wave applications. e-Prime - Advances in Electrical Engineering, Electronics and Energy, 4 (100151). pp. 1-13. ISSN 2772-6711. (Published)

Ahmad Taqiyuddin, Mohamad (2019) Smart blinkers speed humps using solar panel. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Ahmad Wafi Zaim, Kharudin (2012) Non revenue water (NRW) Sg. Lembing experienced. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Ziad, Sulaiman (2023) Lahirkan lebih ramai graduan TVET. Kosmo . p. 22.

Ahmed, Abdulghani Ali and Mohammed, Mohammed Falah (2018) SAIRF: A similarity approach for attack intention recognition using fuzzy min-max neural network. Journal of Computational Science, 25. pp. 467-473. ISSN 1877-7503. (Published)

Ahmed, Mahmood and Waheb Abdul Jabbar, Shaif Abdullah and Wasan Kadhim, Saad and Hadi, Manap (2018) Optimal nano dimensional channel of GaAs-FinFET transistor. In: 2018 IEEE 16th Student Conference On Research And Development (Scored), Bangi, Malaysia (26-28 Nov 2018) , 26 - 28 Nov 2018 , Bangi Resort, Bangi, Selangor, Malaysia. pp. 1-5.. ISBN 978-153869175-5

Ahmed, Mohammad Tofayal and Monir, Minhaj Uddin and Azrina, Abd Aziz and Hasan, Yeasir and Hossain Khan, Mohammad Forrukh and Islam, Kamrul and Hasan, Mehedi and Biswas, Biplob Kumar and Woobaidullah, Abu Sale and Samad, Abdus and Ahmed, Fee Faysal and Rifat, Shamiul Islam and Al Noman, Abdullah and Faruque, Jamal (2022) Hydrochemical investigations of coastal aquifers and saltwater intrusion in severely affected areas of Satkhira and Bagerhat districts, Bangladesh Bangladesh. Arabian Journal of Geosciences, 15 (712). pp. 1-22. ISSN 1866-7511. (Published)

Ahmed, Yassin Mustafa and Khidhir, Basim A. and Khairul Saleh, Mohamed Sahari and M., Ishak (2015) Study of Mechanical Properties on Thick Titanium Alloy (Ti - 6Al- 4V) Multi-Passes Weld. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2 (4). pp. 660-665. ISSN 3159-0040. (Published)

Ahmed Hashabra, Amani Mohammad (2018) Optimization of enzymatic pretreatment and saccharification processes of sawdust for bioethanol production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmed Zainul, Abideen and Fazeeda, Mohamad (2019) Empowering supply chain through discrete-event and agent-based simulation – A systematic review and bibliometric analysis. In: 2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies, CSUDET 2019 , 7-9 November 2019 , Penang. pp. 69-74. (9214764). ISBN 978-172813276-1

Ahmed Zainul, Abideen and Fazeeda, Mohamad (2019) Improving pharmaceutical warehouse supply chain lead time – From production to cross-docking. In: 2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies, CSUDET 2019; , 7-9 November 2019 , Penang. pp. 63-68. (9214732). ISBN 978-172813276-1

Ahmed Zainul, Abideen and Fazeeda, Mohamad (2018) Recent trends and practices in Malaysian pharmaceutical supply chain - a qualitative case study. In: Proceedings Book: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 262-270.. ISBN 978-967-22260-5-5

Ahmedov, Anvarjon A. and Matarneh, Ehab and Mohammad Hasan, Abd Sathar (2019) On the generalized radimacher-menchoff theorem for general spectral decomposition of the elliptic differential operators. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019) , 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-10., 1366 (012067). ISSN 1742-6596

Ahmedov, Anvarjon A. and Siti Nor Aini, Mohd Aslam and Siti Fatimah, Ahmad Zabidi (2017) The uniform convergence of the eigenfunctions expansions of the biharmonic operator in closed domain. In: Journal of Physics: Conference Series, 1st International Conference on Applied and Industrial Mathematics and Statistics (ICoAIMS 2017) , 8-10 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 890 (012028). ISSN 1742-6588 (print); 1742-6596 (online)

Aida Khairani, Ariffin (2018) Exposure assessment of indoor fine particulate matter 2.5 (PM2.5) in bound to heavy metals among shop in urban area of Kuantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Aidil Redza Khan, Mohamed Amir Khan (2021) Development of collision avoidance application using internet of things (loT) technology for vehicle-to-vehicle (v2v) and vehicle-to-infrastructure (v21) communication system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Faizal, Jamlos).

Aikhuele, Daniel O. and Faiz, Mohd Turan (2018) A conceptual model for the implementation of lean product development. International Journal of Service Science, Management, Engineering, and Technology, 9 (1). pp. 1-9. ISSN 1947-959X. (Unpublished) (Unpublished)

Aiman Syakir, Sobki (2016) Hand detection for computer graphical user interface control. Faculty of Electrical and Electronics Engineering, Universiti Malaysia Pahang.

Aimi-Wahidah, A. and Rofiza, M. and Saiful-Nizam, T. and Aizi-Nor-Mazila, R. (2021) Transcriptome and chemical analysis of healthy and infected stems of aquilaria malaccensis. Journal of Tropical Forest Science, 33 (4). pp. 461-472. ISSN 0128-1283. (Published)

Ain Rashida, Abdullah (2016) Application of planning software in construction industries : study on effectiveness of planning software toward project planning. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aini Norhidayah, Mohamed and Jaya Vejayan, Palliah and M. M., Yusoff (2015) Detection and Quantification of Eurycomanone Levels in Tongkat Ali Herbal Products. Journal of Applied Sciences, 15 (7). pp. 999-1005. ISSN 1812-5654 (print); 1812-5662 (online). (Published)

Ainie Hayati, Noruzman and Ngahzaifa, Ab Ghani and Nor Saradatul Akmar, Zulkifli (2022) A comparative study on autism among children using machine learning classification. In: Lecture Notes in Networks and Systems; International Conference on Emerging Technologies and Intelligent Systems, ICETIS 2021 , 25-26 June 2021 , Al Buraimi. pp. 131-140., 322 (263669). ISSN 2367-3370 ISBN 978-303085989-3

Ainie Hayati, Noruzman and Ngahzaifa, Ab Ghani and Nor Saradatulakmar, Zulkifli (2022) FURIA stacking ensemble for ASD classification. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 110..

Ainoon, Shabirin (2021) Potentials of non-ionic semi-rigid polymer assisted by cationic. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ainul Farhani, Ahmad Nizam and Muthiyah, Kalaiselvan and Mohd Sabri, Mahmud (2020) Free fatty acid formation in oil palm fruits during storage. In: 5th International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-7., 991 (012009). ISSN 1757-8981 (Print); 1757-899X (Online)

Aishah, Abdul Aziz and Wan Muhammad Noor Sarbani, Mat Daud and Sorooshian, Shahryar (2019) Exploring quality influencing factors for frozen food industry. In: IOP Conference Series: Materials Science and Engineering; 4th International Conference on Ergonomics and 2nd International Conference on Industrial Engineering, ICE and ICIE 2019 , 27 - 28 August 2019 , Kuala Terengganu, Terengganu. pp. 1-6., 697 (1). ISSN 1757-8981

Aishah, Abu Bakar (2021) The two-steps approach in preserving an online examination integrity. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Aisyah, Ibrahim and Tuty Asmawaty, Abdul Kadir and MacDonald, Roderick H. and Hamdan, Daniyal (2023) Hand Calibration with Limited Data As The Initial Step Towards System Dynamics Model Validation For COVID-19 Case In Malaysia. In: 2023 IEEE 8th International Conference On Software Engineering and Computer Systems (ICSECS) , 25-27 August 2023 , Penang, Malaysia. pp. 200-204.. ISBN 979-8-3503-1094-8

Aisyah, Jilani and Akhtar Razul, Razali (2018) Centrifugal pump performance characteristics for domestic application. MATEC Web of Conferences 225, 05011 (2018), 225 (05011). ISSN 2261-236X. (Submitted) (Submitted)

Aisyah I., Sulaiman and Mohd S., Ahmad and Roshahliza, M. Ramli and Waheb, A. Jabbar and Ammar, Tajuddin (2022) Performance analysis of sigfox deployment. In: Engineering Technology International Conference 2022 (ETIC 2022) , 7 - 8 September 2022 , Universiti Malaysia Pahang, Pahang. . (Unpublished)

Aizi Nor Mazila, Ramli and Normaiza, Z. and Farah Hanani, Zulkifli and Hazrulrizawati, Hamid and Rohaida, Che Man (2018) Beefalin: meat tenderizer from non-edible parts of pineapple. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted)

Aizi Nor Mazila, Ramli and Sharifah Zafierah, Syed Badrulzaman and Hazrulrizawati, Abd Hamid and Prakash, Bhuyar (2020) Antibacterial and antioxidative activity of the essential oil and seed extracts of Artocarpus heterophyllus for effective shelf-life enhancement of stored meat. Journal of Food Processing and Preservation, 45 (1). pp. 1-10. ISSN Print (1745-4549); online (0145-8892). (Published)

Ajibike, W. A. and Adeleke, A. Q. and Fazeeda, Mohamad and M. N.M., Nawi and T.D., Moshood (2020) Examining technology orientation constructs: A validation study. Productivity Management, 25 (5). pp. 1069-1080. ISSN 1868-8519. (Published)

Ajibike, Waliu Adeniyi and Adeleke, Adekunle Qudus and Muuka, Gerry Nkombo and Bamgbade, Jibril Adewale and Mohd Ridzuan, Darun and Moshood, Taofeeq Durojaye (2022) Impacts of oil and gas internal risk factors on project success : Moderating role of government support. Construction Economics and Building, 22 (1). pp. 47-69. ISSN 2204-9029. (Published)

Akama, Shunsuke and Hobara, Yashuhide and Amir Izzani, Mohamed and Gomes, Chandima and Shiokawa, Kazuo and Hirai, Shu and Kikuchi, Hiroshi and Stock, Michael (2022) Spatio-temporal characteristics of energetic lightning in southeast asia : Preliminary statistical results. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 317-327., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4

Akbar, Jalal Uddin Md and Syafiq Fauzi, Kamarulzaman and Abu Jafar, Md Muzahid and Rahman, Md. Arafatur and Uddin, Mueen (2024) A Comprehensive Review on Deep Learning Assisted Computer Vision Techniques for Smart Greenhouse Agriculture. IEEE Access, 12. pp. 4485-4522. ISSN 2169-3536. (Published)

Akbari, Sweeta and Nour, Abdurahman Hamid (2018) Stabilization of crude oil emulsions using different surfactants. International Journal of Innovative Research and Scientific Studies, 1 (1). pp. 23-26. ISSN 2617-6548. (Published)

Akhtar, Muhammad Nadeem and Siti Noor Hajar, Zamrus and Yeap, Swee Keong and Noorjahan Banu, Alitheen and Seema, Zareen (2018) Design, synthesis and cytotoxic effects of curcumin derivatives on K562, MCF-7 and MDA-MB-231 cancer cell lines. In: International Conference On Natural Products ICNP2018 , 19-21 March 2018 , Bayview Beach Resort, Penang. p. 1.. (Unpublished)

Akhtar, Shamim and Muhamad Zahim, Sujod and Hussain Rizvi, Syed Sajjad (2021) A Novel Deep Learning Architecture for Data-Driven Energy Efficiency Management (D2EEM) - Systematic Survey. In: 7th International Conference on Engineering and Emerging Technologies, ICEET 2021 , 27-28 October 2021 , Istanbul, Turkey. (176217). ISBN 9781665427142

Akhtar, Shamim and Muhamad Zahim, Sujod and Rizvi, Syed Sajjad Hussain (2021) A Hybrid Soft Computing Framework for Electrical Energy Optimization. In: 2021 6th International Multi-Topic ICT Conference (IMTIC) , 10-12 Nov. 2021 , Jamshoro & Karachi, Pakistan. (177765). ISBN 9781665482943

Akhyari, Nasir and Ruzaini, Abdullah Arshah and Mohd Rashid, Ab Hamid (2020) Information security culture for guiding employee’s security behaviour: A pilot study. In: IEEE The 6th International Conference On Information Management (ICIM) , 27-29 March 2020 , Imperial College London, United Kingdom. pp. 205-209.. ISBN 978-1-7281-5770-2

Akhyari, Nasir and Ruzaini, Abdullah Arshah and Mohd Rashid, Ab Hamid and Syahrul, Fahmy (2022) Information Security Culture Concept towards Information Security Compliance: A Comparison between IT and Non-IT Professionals. International Journal of Integrated Engineering, 14 (3). pp. 157-165. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Akm Asif, Iqbal and Norfatihah, Ismail (2022) Mechanical properties and corrosion behavior of silica nanoparticle reinforced magnesium nanocomposite for bio-implant application. Materials, 15 (8164). pp. 1-11. ISSN 1996-1944. (Published)

Al Aliyani, Wafa Rashid and Lee, Chia Kuang (2022) A systematic review on identifying factors influencing total quality management implementation. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-4..

Al Biajawi, Mohammad I. and Rahimah, Embong (2023) The Impact of Varying Ratios of Water-to-Cement Content on the Fresh and Strength Properties of Self-Compacting Concrete. In: World Sustainable Construction Conference Series 2022 (WSCC 2022) , 14 - 15 October 2022 , Kuala Lumpur, Malaysia. pp. 69-80. (4). ISSN 2674-1237

Al Biajawi, Mohammad Ismail Yousef and Wahppe Alkasawneh, Rufaidah and Mostafa, Sahar A. and Izwan, Johari and Rahimah, Embong and Khairunisa, Muthusamy (2021) Performance of sustainable concrete containing recycled latex gloves and silicone catheter under elevated temperature. Journal of King Saud University - Engineering Sciences. pp. 1-13. ISSN 1018-3639. (In Press / Online First) (In Press / Online First)

Al Farsi, Ghaliya and Azmi, Mohd Yusof and Awanis, Romli and Tawafak, Ragad M. and Malik, Sohail Iqbal and Jabbar, Jasiya and Mohd Ezanee, Rsuli (2021) A review of virtual reality applications in an educational domain. International Journal of Interactive Mobile Technologies, 15 (22). pp. 99-110. ISSN 1865-7923. (Published)

Al Gariri, Salem Mohammed Salem and Baqadeem, Abdullah Omar Abdullah and Moon, Lee Pei and Mazlan, Abu Seman and Khairil Azman, Masri (2023) The performance of stone mastic asphalt incorporating iron ore. Civil Engineering and Architecture, 11 (6). pp. 3571-3576. ISSN 2332-1091. (Published)

Al Maki, Wikky Fawwaz and Muktyas, Indra Bayu and Arifin, Samsul and Suwarno, . and Mohd Khairul Bazli, Mohd Aziz (2023) Implementation of a logistic map to calculate the bits required for digital image steganography using the least significant bit (LSB) method. Journal of Computer Science, 19 (6). pp. 686-693. ISSN 1549-3636. (Published)

Al-Amoudi, Ibrahim and Rosdiyana, Samad and Nor Rul Hasma, Abdullah and Mahfuzah, Mustafa and Pebrianti, Dwi (2022) Automatic attendance system using face recognition with deep learning algorithm. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 573-588., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6

Al-Amshawee, Sajjad Khudhur Abbas and Husain, Mohamed Saad Bala and Mohd Yusri, Yunus and Nor Fadhillah, Mohamed Azmin and Oladosu, Temidayo Lekan (2022) Extruded and overlapped geometries of feed spacers for solution mixing in electrochemical reactors and electrodialysis-related processes. Chemical Engineering Communications. pp. 1-26. ISSN 0098-6445. (Published)

Al-Amshawee, Sajjad Khudhur Abbas and Mohd Yusri, Mohd Yunus (2023) Impact of membrane spacers on concentration polarization, flow profile, and fouling at ion exchange membranes of electrodialysis desalination: Diagonal net spacer vs. ladder-type configuration. Chemical Engineering Research and Design, 191. pp. 197-213. ISSN 0263-8762. (Published)

Al-Bahr, Tareq M. and Sitti Asmah, Hassan and Othman, Che Puan and Nordiana, Mashros and Nur Sabahiah, Abdul Sukor (2022) Speed-flow-geometric relationship for urban roads network. Applied Sciences (Switzerland), 12 (9). pp. 1-23. ISSN 2076-3417. (Published)

Al-Emran, Mostafa and Shaalan, Khaled (2017) Academics’ Awareness towards Mobile Learning in Oman. International Journal of Computing and Digital Systems, 6 (1). pp. 1-7. ISSN 2210-142X. (Published)

Al-Emran, Mostafa Nadhir Hassan (2019) Extending the technology acceptance model with knowledge management factors to examine the acceptance of mobile learning. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Al-Hameli, Bassam Abdo and Al-Sewari, Abdul Rahman Ahmed Mohammed and Basurra, Shadi S. and Bhogal, Jagdev and Ali, Mohammed A H (2023) Diabetes disease prediction system using HNB classifier based on discretization method. Journal of integrative bioinformatics, 20 (1). pp. 1-13. ISSN 1613-4516. (Published)

Al-Hetari, Husam Yousef and Alginahi, Yasser M. and Kabir, Muhammad Nomani and Al-Naggar, Noman Q. and Al-Rumaima, Mahmoud A. and Hasan, Md Munirul (2020) Modeling lung functionality in volume-controlled ventilation for critical care patients. In: IEEE International Conference on Artificial Intelligence in Engineering and Technology, IICAIET 2020 , 26-27 September 2020 , Kota Kinabalu, Sabah. pp. 1-4. (9257851). ISBN 978-172816946-0

Al-Jasmi, Salah and Nur Farhayu, Ariffin and Mazlan, Abu Seman (2023) Design and Analysis of Blast Resistant RC Beams for Concrete Structures at Off-Site Oil & Gas Plants. In: World Sustainable Construction Conference Series 2022 (WSCC 2022) , 14 - 15 October 2022 , Kuala Lumpur, Malaysia. pp. 81-99., 4. ISSN 2674-1237

Al-Jbour, Nawzat D. and M. D. H., Beg and Jolius, Gimbun and A. K. M., Moshiul Alam (2021) Preparation and characterization of low molecular weight chitosan with different degrees of deacetylation by the acid hydrolysis method. International Journal of Applied Pharmaceutics, 13 (2). pp. 153-164. ISSN 0975-7058. (Published)

Al-Jipouri, Ali and Almurisi, Samah Hamed and AL-japairai, Khater Ahmed Saeed and Latifah Munirah, Bakar and Doolaanea, Abd Almonem (2023) Liposomes or extracellular vesicles : A comprehensive comparison of both lipid bilayer vesicles for pulmonary drug delivery. Polymers, 15 (318). pp. 1-63. ISSN 2073-4360. (Published)

Al-Madani, Mohammed and Fernando, Yudi and Pua, Wee Sin (2022) Implications of Blockchain Deployment in Energy Supply Chain Management: Report Integrity. International Journal of Industrial Management (IJIM), 13 (1). pp. 408-421. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Al-Madani, Mohammed Hammam Mohammed and Fernando, Yudi and Tseng, Ming-Lang (2022) Assuring Energy Reporting Integrity: Government Policy’s Past, Present, and Future Roles. Sustainability, 14 (22). pp. 1-24. ISSN 2071-1050. (Published)

Al-Saffar, Ahmed Ali Mohammed and Tao, Hai and Mohammed, Ahmed Talab (2017) Review of deep convolution neural network in image classification. International Conference on Radar Antenna, Microwave, Electronics, and Telecommunications. pp. 26-31. ISSN 978-1-5386-3849. (Published)

Al-Sharifi, H. A. M. and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and Shafie, S. (2017) Numerical Solutions on Flow and Heat Transfer of Non-Newtonian Jeffrey Micropolar Fluid. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Al-Talib, Ammar Abdulaziz Majeed and Aung, Ik Chu and Noor Idayu, M. Tahir and Sarah ‘Atifah, Saruchi (2023) Solar powered outdoor air purifier with air quality monitoring. In: Proceedings of International Conference on Artificial Life and Robotics; 28th International Conference on Artificial Life and Robotics, ICAROB 2023 , 9-12 February 2023 , Virtual, Online. pp. 688-693. (290429). ISSN 2435-9157 ISBN 978-499083508-8

Al-Talib, Ammar Abdulaziz Majeed and They, Kai Yang and Noor Idayu, M.Tahir and Sarah ‘Atifah, Saruchi (2023) Design and fabrication of power generating treadmill. In: Proceedings of International Conference on Artificial Life and Robotics; 28th International Conference on Artificial Life and Robotics, ICAROB 2023 , 9-12 February 2023 , Virtual, Online. pp. 710-714. (290429). ISSN 2435-9157 ISBN 978-499083508-8

Al-hokabi, Abdulmajeed and Muzamir, Hasan and Amran, Mugahed and Fediuk, Roman and Vatin, Nikolai Ivanovich and Klyuev, Sergey (2021) Improving the early properties of treated soft kaolin clay with palm oil fuel ash and gypsum. Sustainability, 13 (10910). pp. 1-18. ISSN 2071-1050. (Published)

AlAriqi, Hani Taha and Jabbar, Waheb A. and Hashim, Yasir and Hadi, Manap (2019) Temperature characteristics of silicon nanowire transistor depending on oxide thickness. Journal of Nano- and Electronic Physics, 11 (3). pp. 1-4. ISSN 2077-6772. (Published)

AlAriqi, Hani Taha and Jabbar, Waheb A. and Hashim, Yasir and Hadi, Manap (2019) Temperature sensitivity of silicon nanowire transistor based on channel length. In: IEEE 8th International Conference On Modeling Simulation And Applied Optimization (ICMSAO 2019) , 15-17 April 2019 , University of Bahrain, Bahrain. pp. 1-4.. ISBN 978-1-5386-7684-4

Alabadla, Mustafa and Fatimah, Sidi and Iskandar, Ishak and Hamidah D., Ibrahim and Lilly Suriani, Affendey and Zafienas, Che Ani and A. Jabar, Marzanah Ab and Bukar, Umar Ali and Devaraj, Navin Kumar and Ahmad Sobri, Muda and Tharek, Anas and Noritah, Omar and Mohd Izham, Mohd Jaya (2022) Systematic review of using machine learning in imputing missing values. IEEE Access, 10. pp. 44483-44502. ISSN 2169-3536. (Published)

Alajmi, Qasim and Al-Nuaimy, Louay A. and Arul Jose, G. Jai and Mastan, Mohammed and Al-Sharafi, Mohammed Ali (2019) Cloud computing services and its Effect on tertiary education : Using google classroom. In: 2019 7th International Conference on ICT and Accessibility, ICTA 2019; 7th International Conference on ICT and Accessibility, ICTA 2019 , 13-15 December 2019 , Hammamet. pp. 1-3. (9144797). ISBN 978-172816183-9

Alajmi, Qasim and Sadiq, Ali Safa (2016) Opportunities and Challenges in Management Information Systems. International Journal of Applied Sciences and Management, 1 (2). pp. 171-182. ISSN 2413-3396. (Published)

Alam, Mohammad Khurshed and Mohd Herwan, Sulaiman and Sayem, Md. Shaoran and Khan, Rahat (2023) Economic power dispatch solutions incorporating stochastic wind power generators by moth flow optimizer. International Journal of Advanced Technology and Engineering Exploration, 10 (100). pp. 340-362. ISSN 2394-5443. (In Press / Online First) (In Press / Online First)

Alam, Muneer and Jain, Neelesh Kumar and Pathak, Sunil (2018) Investigations on copper nano-particles synthesis by pulsed electrochemical dissolution (PECD) process. In: 4th International Conference Of Chemical Engineering And Industrial Biotechnology (ICCEIB 2018) , 1-2 Aug 2018 , Seri Pacific Hotel, Kuala Lumpur. pp. 569-571..

Alam Miah, Mohammad Badrul and Suryanti, Awang (2022) KDA: An unsupervised approach for analyzing keyphrases distance from news articles as a feature of keyphrase extraction. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 83..

Alanas, Edith and Erdawati, Erdawati and Saefurahman, Ganjar and Amiril Sahab, Abdul Sani (2021) Utilization of cellulose nanocrystals (CNC) as a filler for chitosan-based films for chili peppers packaging. In: IOP Conference Series: Earth and Environmental Science, International Conference of Biomass and Bioenergy 2020 , 10-11 August 2020 , Bogor, Indonesia. pp. 1-12., 749 (012028). ISSN 1755-1307

Alara, Oluwaseun Ruth and Abdurahman, N.H. and Ali, H.A. and Zain, N.M. (2021) Microwave-assisted extraction of phenolic compounds from Carica papaya leaves: An optimization study and LC-QTOF-MS analysis. Future Foods, 3 (100035). pp. 1-8. ISSN 2666-8335. (Published)

Alara, Oluwaseun Ruth and Abdurahman, Nour Hamid and Ali, Hassan Alsaggaf (2023) Optimization of microwave-enhanced extraction parameters to recover phenolic compounds and antioxidants from Corchorus olitorius leaves. Chemical Papers, 77 (8). pp. 4217-4233. ISSN 0366-6352. (Published)

Albarqouni, Yasin and M. Ali, Gomaa A. and Ab. Rahim, Mohd-Hairul and Kwok Feng, Chong (2020) On the way of DNA Metallization: Principle, methods, and recent applications. Chemistry of Advanced Materials (CAM), 5 (1). pp. 1-14. ISSN 2415-6213. (Published)

Alfaz, Nazia and Sarwar, Talha and Das, Argho and Noorhuzaimi, Mohd Noor (2022) A densely interconnected convolutional neural network-based approach to identify COVID-19 from Chest X-ray Images. In: Lecture Notes in Electrical Engineering; 11th International Conference on Robotics, Vision, Signal Processing and Power Applications, RoViSP 2021 , 5-6 April 2021 , Virtual, Online. pp. 419-425., 829 LNEE (272139). ISSN 1876-1100 ISBN 978-981168128-8

Alhaj, Nura Abdalrhman and Mohd Faizal, Jamlos and Sulastri, Abdul Manap and Bakhit, Abdelmoneim Ahmed and Rizalman, Mamat (2022) A review of multiple access techniques and frequencies requirements towards 6G. In: Proceedings - 2022 RFM IEEE International RF and Microwave Conference, RFM 2022 , 19-21 December 2022 , Kuala Lumpur. pp. 1-4. (187406). ISBN 978-166548977-5

Alhamed, Abdulrahman and Mohd Romlay, Fadhlur Rahman and Muhammad, Khairul Fikri and Mohd Zawawi, Mohd Zairulnizam and Ishak, I. (2022) Support-free fused deposition modelling printing for overhangs structure. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 64-71. ISSN 2637-0883. (Published)

Alhammadi, Ali and Soar, Jeffrey and Yusaf, Talal F. and Ali, Bashar Mahmood and Kadirgama, Kumaran (2023) Redefining procurement paradigms: A critical review of buyer-supplier dynamics in the global petroleum and natural gas industry. Extractive Industries and Society, 16 (101351). pp. 1-11. ISSN 2214-790X. (Published)

Ali, A. J. Adham (2015) Operation research methods for industrial system. Penerbit UMP, Kuantan, Pahang. ISBN 9789670691602

Ali, A. J. Adham and Ahmad Nazif, Noor Kamar and Abdullah, Ibrahim and Sorooshian, Shahryar (2013) Simulation Model and Genetic Algorithm to Assembly Line Balancing. International Journal of Technology Management, 2. pp. 63-72. ISSN 2289-2753. (Published)

Ali, A. J. Adham and Razman, Mat Tahar (2011) Process queuing in the automobile manufacturing body shop: Using a multi-objective model. International Journal of Physical Sciences, 6 (30). pp. 6928-6933. ISSN 1992-1950. (Published)

Ali, Ahmed Mahmood (2019) Design of optimal nanoscale channel dimensions of FinFET based on constituent semiconductor materials. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Shaif Abdullah, Waheb Abdul Jabbar).

Ali, Mahathir (2015) Empower ECER Mahkota bantu murid orang asli peroleh 5A. Mingguan Malaysia .

Ali, Mohammed Hasan and Mohamad Fadli, Zolkipli and Al Mohammed, B.A.D. and Alyani, Ismail (2018) A new intrusion detection system based on fast learning network and particle swarm optimization. IEEE Access, 6. 20255 -20261. ISSN 2169-3536. (Published)

Ali, Mushtaq and Jasni, Mohamad Zain and Mohamad Fadli, Zolkipli and Badshah, Gran (2015) Mobile cloud computing & mobile's battery efficiency approaches: A review. Journal of Theoretical and Applied Information Technology , 79 (1). pp. 153-175. ISSN 1992-8645. (Published)

Ali Abdallah, Ali Emhemed (2021) Optimal distributed generation and load shedding scheme using artificial bee colony- hill climbing algorithm considering voltage stability and losses indices. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ali Asghar, Jomah Adham and Razman, Mat Tahar (2012) A simulation study of a new rate-and-queue-based active queue management algorithm. Journal of Modelling in Management, 7 (3). pp. 274-286. ISSN 1746-5664. (Published)

Ali Imran, Awaludin and S. H., Tomadi and Rosdi, D. and Mas Ayu, H. (2022) Analysis and simulation of temperature distribution and stress development in wire edm of tungsten carbide. In: Journal of Physics: Conference Series, Third International Conference on Emerging Electrical Energy, Electronics and Computing Technologies 2021 , 16-17 December 2021 , Virtual Conference. pp. 1-12., 2312 (012046). ISSN 1742-6588

Ali Muttaleb, Hasan (2022) Knowledge based semantic representation for semantic relatedness measurements. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Taha Hussein, Alaaldeen Rassem).

Ali Zainal-Abidin, Mohamad Termizi and Muhammad Amirul Syafiq, Nasarudin and Nurul Farah Anisa, Hairolnizam and Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Suryati, Sulaiman (2022) The mixing of solid waste from palm acid oil and palm kernel cake as a source of animal feed (free range chicken). In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 188..

Aliaa, Zanurin and Nor Azmi, Hj Johari and Juliawati, Alias and Mas Ayu, Hassan and Norizah, Hj Redzuan and Sudin, Izman (2021) Research progress of sol-gel ceramic coating : A review. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1849-1854., 48 (176050). ISSN 2214-7853

Alim, Samiul (2019) Development of electrochemical biosensor based on SnO2-nanofiber with enhanced electron transfer of redox biomolecule. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aliman, Omar and Bakiss Hiyana, Abu Bakar and Khairunisa, Muthusamy and Albiajawi, Mohammad Ismail Yousef (2022) Rehabilitation of fire-damaged reinforced concrete members by using fiber-reinforced polymers and ultra-high fiber reinforced concrete: An overview. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 59..

Aliman, Omar and Bakiss Hiyana, Abu Bakar and Khairunisa, Muthusamy and Mohammad Ismail Yousef, AlBiajawi (2022) Effect of fire exposure on mechanical properties of normal strength concrete: An overview. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 60..

Aliyah, Jamaludin and Che Ku Mohammad Faizal, Che Ku Yahya (2018) Green synthesis of silver nanoparticles using Sago (Metroxylon Sagu) via auto claving method. IIUM Engineering Journal, 19 (1). pp. 178-184. ISSN 1511-788X. (Published)

Aljabali, Ahlam and Abdul Rahman, Mohd Kasim and Ayman, Mohd Hussein (2019) A progress on the development of mathematical model on two-phase flow over a vertical stretching sheet. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019) , 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-10., 1366 (012045). ISSN 1742-6596

Alkasasbeh, Hamzeh Taha and Mohd Zuki, Salleh and Razman, Mat Tahar and Roslinda, Nazar and Ioan, Pop (2014) Free Convection Boundary Layer Flow near the Lower Stagnation Point of a Solid Sphere with Convective Boundary Conditions in a Micropolar Fluid. In: Proceedings of the 3rd International Conference on Mathematical Sciences , 17-19 December 2013 , Kuala Lumpur. pp. 76-82..

Almanifi, Omair Rashed Abdul Wareth and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Ahmad Fakhri, Ab. Nasir and Muhammad Yusri, Ismail and Anwar, P. P. Abdul Majeed (2021) The classification of heartbeat PCG signals via transfer learning. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Universiti Malaysia Pahang (Virtual). pp. 49-59., 730. ISBN 978-981-33-4596-6

Almanifi, Omair Rashed Abdulwareth and Ahmad Fakhri, Ab. Nasir and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Abdul Majeed, Anwar P. P. (2022) Heartbeat murmurs detection in phonocardiogram recordings via transfer learning. Alexandria Engineering Journal, 61 (12). pp. 10995-11002. ISSN 1110-0168. (Published)

Almanifi, Omair Rashed Abdulwareth and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed (2022) Human activity recognition based on wrist PPG via the ensemble method. ICT Express. pp. 1-5. ISSN 2405-9595. (In Press / Online First) (In Press / Online First)

Almfraji, Mohammad Amin and Almsafir, Mahmoud Khalid and Liu, Yao (2014) Economic Growth and Foreign Direct Investment Inflows: The Case of Qatar. Procedia Social and Behavioral Sciences, 109. pp. 1040-1045. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Almohammedi, Akram A. and Nor K., Noordin and Sali, A. and Fazirulhisyam, Hashim and Jabbar, Waheb A. and Saeed, Sabri (2019) Modeling and analysis of IEEE 1609.4 MAC in the presence of error-prone channels. International Journal of Electrical and Computer Engineering (IJECE), 9 (5). pp. 3531-3541. ISSN 2088-8708. (Published)

Almuallim, Basel and Wan Sharuzi, Wan Harun and Al Rikabi, Ihab Jabbar and Mohammed, Hussein A. (2022) Thermally conductive polymer nanocomposites for filament-based additive manufacturing. Journal of Materials Science, 57 (6). 3993 -4019. ISSN 0022-2461. (Published)

Almurisi, Samah Hamed and AL-japairai, Khater Ahmed Saeed and Alshammari, Farhan and Alheibshy, Fawaz and Sammour, Rana M.F. and Doolaanea, Abd Almonem (2022) Stability of paracetamol instant jelly for reconstitution: Impact of packaging, temperature and humidity. Gels, 8 (3). pp. 1-14. ISSN 2310-2861. (Published)

Alrubaye, Ali Jamal and Muzamir, Hasan and Al-Fattah, Mohammad (2016) Improving Geotechnical Characteristics of Kaolin Soil Using Silica Fume and Lime. Special Topics & Reviews in Porous Media: An International Journal, 7 (1). pp. 77-85. ISSN 2151-4798 (print); 2151-562X (online). (Published)

Alrubaye, Ali Jamal and Muzamir, Hasan and Fattah, Mohammed Y. (2016) Engineering Properties of Clayey Soil Stabilized with Lime. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2434-2441. ISSN 1819-6608. (Published)

Alsamawi, Mohamed Abdulwali Ali and Mohd Ridzuan, Darun and Panigrahi, Shrikant and Al-Refaei, Abd Al-Aziz Hamed (2019) The effect of Corporate Social Responsibility on corporate performance in Oil and Gas Industry. Journal of Advanced Research in Social and Behavioural Sciences, 16 (1). pp. 1-14. ISSN 2462-1951. (Published)

Alsariera, Yazan A. and Mazlina, Abdul Majid and Kamal Z., Zamli (2015) A Bat-inspired Strategy for Pairwise Testing. Journal of Engineering and Applied Sciences, 10 (18). pp. 8500-8506. ISSN 1819-6608. (Published)

Alsewari, Abdulrahman A. and KabashI Kathir, Sharafeldin and Saeed, Mohammed Samih (2021) BUSTRACKER: Cloud based bus tracking application. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Alsewari, Abdulrahman A. and Saeed, Mohammed Samih and Kathir, Sharafeldin Kabashi (2021) ToiMon: W.C. monitoring system. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Alshaeer, Honin Ali Yahya and Irwan, J. M. and Alshalif, Abdullah Faisal and Al-Fakih, Amin and Ewais, Dina Yehia Zakaria and Salmi, Abdelatif and Alhokabi, Abdulmajeed Ali (2022) Review on carbonation study of reinforcement concrete incorporating with bacteria as self-healing approach. Materials, 15 (5543). pp. 1-17. ISSN 1996-1944. (Published)

Alsibai, Mohammad Hayyan and Abdul Manap, Sulastri (2016) A Study on Driver Fatigue Notification Systems. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10987-10992. ISSN 1819-6608. (Published)

Alsibai, Mohammad Hayyan and Hadi, Manap and Abdul Adam, Abdullah (2015) Enhanced Face Recognition Method Performance on Android vs Windows Platform. ARPN Journal of Engineering and Applied Sciences, 10 (23). 17479 -17485 . ISSN 1819-6608. (Published)

Alsibai, Mohammad Hayyan and Hoo, Min Sing (2015) A Smart Driver Monitoring System Using Android Application and Embedded System. In: International Conference on Control Systems, Computing and Engineering (ICCSCE 2015) , 27-29 November 2015 , Penang. pp. 1-6.. (Unpublished)

Alsibai, Mohammad Hayyan and Syafiq Fauzi, Kamarulzaman and Hossam , Adden Alfarra and Naif, Yasir Hashim (2017) Real Time Emergency Auto Parking System in Driver Lethargic State for Accident Preventing. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10., 90 (01034). ISSN 2261-236X

Alsibai, Mohammed Hayyan and Nurul Nadia, Nor Hamran and Abdul Nasir, Abd Ghafar and Abdul Adam, Abdullah (2018) A monitoring system for EPW safe use. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-2). pp. 131-135. ISSN 2180-1843. (Published)

Alsibai, Mohammed Hayyan and Sayong, Maxwell and Koay, Li Woon and Atnaw, Samson M. and Nurul Nadia, Nor Hamran (2017) Optimization of hybrid electric vehicle control for efficient performance at critical energy levels. In: 6th IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2016) , 25-27 November 2016 , PARK ROYAL Penang Resort, Penang; Malaysia. pp. 205-210.. ISBN 978-1-5090-1178-0

Alsibai, Mohammed Hayyan and Sharif, Mhd Saeed and Salma, Yaakub and Nurul Nadia, Nor Hamran (2018) An innovative EPW design using add-on features to meet Malaysian requirements. In: 7th IEEE International Conference on Control System, Computing and Engineering (ICCSCE) , 24-26 November 2017 , Penang, Malaysia. pp. 1-6..

Alsibai, Mohammed Hayyan and Sulastri, Abdul Manap (2017) Arduino/Genuino: start as professional: short course in a book. Penerbit UMP, Kuantan, Pahang. ISBN 9789672054535

Alwin, Long Su Weng and Atnaw, Samson M. and Roziah, Zailan and Muhamad Muhtazam, Noor Din (2017) Sustainability Management Program for Industries- A Case Study. In: Fluids and Chemical Engineering Conference (FluidsChE 2017) , 4-6 April 2017 , Kota Kinabalu, Sabah, Malaysia. pp. 1-5., 111 (02010). ISSN 2261-236X

Alwin, Long Su Weng and Atnaw, Samson M. and Roziah, Zailan and Muhamad Muhtazam, Noor Din (2017) Towards Cooling Tower Efficiency-An Energy Audit Approach. In: Fluids and Chemical Engineering Conference (FluidsChE 2017) , 4-6 April 2017 , Kota Kinabalu, Sabah, Malaysia. pp. 1-4., 111 (02011). ISSN 2261-236X

Alyaa Afiqah, Zi @Fauzi and Rahayu, Rahmad and Mohamad Shaiful, Abdul Karim and Faiz, Arith and Ahmad Syahiman, Mohd Shah (2022) Chlorophyll’s dependency towards electrical characteristics of banana midrib-based dye- sensitized solar cell for waste management solution. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 114..

Alzaghir, Abdullah Faisal and Mohd Nazir, Mat Nawi and Asmelash, Mebrahitom Asmelash and Azmir, Azhari (2022) Optimization of waterjet paint removal operation using artificial neural network. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 11-20., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Amalia, Zulkifli and Norfatihah, Mazuki and Ahmad Salihin, Samsudin (2021) Improvement of electrical properties of CMC-PVA doped with various contents of LiNO3 as an application for hybrid polymer electrolytes. Makara Journal of Technology, 25 (2). pp. 55-62. ISSN 2355-2786. (Published)

Amalina Hanani, Ismail (2019) Pozzolanic reactivity of chemically pre-treated palm oil clinker powder (POCP) with hydrochloric acid. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aman, Sidra and Hussanan, Abid and Zulkhibri, Ismail and Mohd Zuki, Salleh (2019) MHD effect on Nano-Maxwell fluid with cobalt nanoparticles passing over a Plate with porous medium. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019) , 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-6., 1366 (012047). ISSN 1742-6596

Amar Hakimi, Bahar (2022) Voltage Instability Analysis For Electrical Power System Using Voltage Stability Index. College of Engineering, Universiti Malaysia Pahang.

Amer Adel, Shahad (2019) The deciding factors for expatriate purchase of property in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amiera Azwa, Abdul Ghafar and Noraini, Mohd Razali (2022) The significant of lean practice on the sustainability performance in automotive manufacturing industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 83-89. ISSN 2636-9575. (Published)

Amiir Haamzah, Mohamed Ismail and Anwar, P. P. Abdul Majeed and E. H., Yap and A. H. P., Tan and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and M. A., Abdullah (2022) The employment of transfer learning for Covid-19 diagnostics: A ResNet evaluation. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 128..

Amin Ridzuan, Ishak (2019) 2 penyelidik cipta sistem lampu LED berkuasa tinggi. Berita Harian . p. 16.

Amin Ridzuan, Ishak (2016) UMP cipta aplikasi bantu pelajar hafal al-Quran. Berita Harian . p. 3.

Aminatul Sobirah, Zahari (2022) Effect of molecular weight on Piezoelectric properties of electrospun polyvinylidene fluoride blended with cellulose nanocrystals. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhammad Hafiz, Mazwir).

Aminatul Sobirah, Zahari and Muhammad Hafiz, Mazwir and Izan Izwan, Misnon (2021) Electrospun polyvinylidene fluoride (pvdf) blended with cellulose nanocrystals (cncs) as piezoelectric material. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Amir, Azizi and Darestani, Soroush Avakh and Ghavami, Samane (2013) Supply Chain Management: Supplier Selection Problem with Multi-objective Considering Incremental Discount. In: Asia Pacific Industrial Engineering and Management System 2013 , 3-6 December 2013 , Cebu, Philippines. pp. 1-9..

Amir, Abdul Razak and A. F., Sharol and Z. A. A., Majid and M. A. A., Azmi and M. A. S. M., Tarminzi and Ming, Y. H. and Z. A, Zakaria and M. A, Harun and A., Fazlizan and K., Sopian (2022) Effect of thermal energy storage material on the performance of double-pass solar air heater with cross-matrix absorber. Journal of Energy Storage, 51 (104494). pp. 1-15. ISSN 2352-152X. (Published)

Amir Firdaus, Basirun (2019) Solar charging system for bluetooth solar grass trimmer. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Amir Izzani, Mohamed and Mohd Razali, Daud and Mohd Herwan, Sulaiman and Ahmad Afif, Mohd Faudzi and Norlin, Pauzi and Mohamad Kamarol, Mohd Jamil (2022) Inactivation of mucose on bread by using plasma jet. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 1125-1131., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6

Amira Alia, Zulkifli (2020) Isolation of kistomin milk coagulant from calloselasma rhodostoma venom. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jaya Vejayan, A/l Palliah).

Amira Qistina Syamimi, Zaifuddin and Aiman, Mohd Halil and Quazi, Moinuddin Mohammed and Muhammad Izhar, Ishak (2021) Enhancement of laser absorptivity in metal by laser surface modification. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Amirah, Ya'acob and Norazwina, Zainol and Kamaliah, Abdul Samad (2022) Pineapple leaf juice characterization and kinetic study on microbial growth inhibition. Jurnal Teknologi, 84 (2). 133 -144. ISSN 0127-9696. (Published)

Amirah Nurhafizah, Abu Bakar and Nuratiqah, Mohd Isa and Mohamad Shaiful, Abdul Karim and Ruhaizad, Ishak and Suazlan, Mt Aznam and Ahmad Syahiman, Mohd Shah (2022) Study of linear-correlation based solar irradiance measurement device photovoltaic application. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 805-819., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Amiril Sahab, Abdul Sani and Muhammad Asyraaf Rusyaidi, Abdul Rauf and Aifa Arina, Mohd Alwi and Nur Hidayah, Mohd Nizam (2021) Calophyllum inophyllum (CI) fruits kernel seed separator for biolubricant production line. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Amiril Sahab, Abdul Sani and Muhammad Nur Qayyum, Kamarulbahrin (2021) Halogen dryer for roselle tea production. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Amiril Sahab, Abdul Sani and Shahandzir, Baharom (2021) A pneumatic non-explosive quick stop device for CNC turning machine. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Amiril Sahab, Abdul Sani and Shahandzir, Baharom and Noor Asimah, Mamat and Amirah Sakinah, Mohd Rozlan and Norfazillah, Talib (2022) Comparative evaluation of crude Tamanu oil performance as metalworking fluids. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1783-1788., 48 (Part 6). ISSN 2214-7853

Amiril Sahab, Abdul Sani and Sousa, Fábio José Pinheiro (2020) The effect of pressure gradient and abrasive tool wear when polishing ceramic tiles. Materials Today: Proceedings, 46 (4). pp. 1770-1777. ISSN 2214-7853. (Published)

Amirul Asyraf, Abdul Manan and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Nur Aiman, Shapiee (2020) Chili plant classification using transfer learning models through object detection. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 23-27. ISSN 2637-0883. (Published)

Amirul Hafiiz, Ruhaimi and Che Ku Nor Liana, Che Ku Hitam and Muhammad Arif, Ab Aziz and Norul Hisham, A. Hamid and Herma Dina, Setiabudi and Teh, L. P. (2022) The role of surface and structural functionalisation on graphene adsorbent nanomaterial for CO2 adsorption application : Recent progress and future prospects. Renewable and Sustainable Energy Reviews, 167 (112840). pp. 1-22. ISSN 1364-0321. (Published)

Amirul Hakim, Sufian and Tan, Zi Xun and Mohd Noor Syukri, Zainal Abidin and Ahmad Shahir, Jamaludin and Mohd Nizar, Muhd Razali (2021) Study on tire tread design effect onto Tire-road contact behavior through FEM. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 893-902.. ISBN 978-981-15-9504-2 (Print) ; 978-981-15-9505-9 (Online)

Amirul Shafiq, Khairuddin (2021) Modelling Of Power Converter Wpt System Based On Inductor Current Ripple. College of Engineering, Universiti Malaysia Pahang.

Amy Zulaikha, Mohd Ali (2023) Empowering Digital Learning UMPSAs Synergy in EdTech Initiatives for Micro-Credential Content Development. UMPSA News .

Anbananthan Pillai, Munanday and Norazlianie, Sazali and Wan Sharuzi, Wan Harun and K., Kadirgama and Ahmad Shahir, Jamaludin (2023) Analysis of convolutional neural networks for facial expression recognition on GPU, TPU and CPU. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 50-67. ISSN 2462-1943. (Published)

Andalib, Tarnima Warda (2014) A Process of Developing an HRM Framework Based on Qualitative Study in Technology Companies in Bangladesh and Malaysia. International Journal of Research in Business and Social Science, 3 (2). pp. 148-163. ISSN 2147-4478. (Published)

Andi Razif, Andi Rahim (2015) Kanban food ordering system. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Andri, Kusbiantoro and Rahimah, Embong and Azrina, Abd Aziz (2018) Strength and microstructural properties of mortar containing soluble silica from sugarcane bagasse ash. In: International Conference On Advanced Materials Research , 19-25 Januari 2018 , Kyushu University, Ito Campus. pp. 269-274., 765. ISSN 10139826 ISBN 978-303571230-8

Anis Farhanah, Mohd Fadzir and Siti Ilyani, Rani and Gimbun, Jolius (2019) Experimental measurement for non-spherical bulk materials flow behaviour in rectangular enclosure. In: IOP Conference Series: Materials Science and Engineering; Electronic Packaging Interconnect Technology Symposium 2019, EPITS 2019 , 24 - 25 November 2019 , Penang. pp. 1-9., 701 (012061). ISSN 1757-8981

Anis Farihan, Mat Raffei and Sutikno, Tole and Asmuni, Hishammuddin and Hassan, Rohayanti and Razib, M. Othman and Shahreen, Kasim and A Riyadi, Munawar (2019) Fusion iris and periocular recognitions in non-cooperative environment. Indonesian Journal of Electrical Engineering and Informatics, 7 (3). pp. 543-554. ISSN 2089-3272. (Published)

Anis Hazirah Izzati Hasnu, Al-Hadi and Aqib Fawwaz, Mohd Amidon and Siti Mariatul Hazwa, Mohd Huzir and Nurlaila, Ismail and Zakiah, Mohd Yusoff and Saiful Nizam, Tajuddin and Mohd Nasir, Taib (2023) Preliminary study on agarwood essential oil and its classification techniques using machine learning. Indonesian Journal of Electrical Engineering and Computer Science, 29 (2). pp. 753-760. ISSN 2502-4752. (Published)

Anis Hazirah ‘Izzati H., Al-Hadi and Aqib Fawwaz, Mohd Amidon and Nurlaila F., Ismail and Siti Mariatul Hazwa, Mohd Huzir and Zakiah, Mohd Yusoff and Saiful Nizam, Tajuddin and Mohd Nasir, Taib (2022) Statistical analysis of high grade samples from four grades Aquilaria Malaccensis oil. In: 2022 IEEE 10th Conference on Systems, Process & Control (ICSPC) , 17 December 2022 , Hatten Hotel Melaka, Malaysia. pp. 117-122. (185865). ISBN 978-166547098-8

Anis Hazirah ‘Izzati H., Al-Hadi and Aqib Fawwaz, Mohd Amidon and Siti Mariatul Hazwa, Mohd Huzir and Nurlaila, Ismail and Zakiah, Mohd Yusoff and Saiful Nizam, Tajuddin and Mohd Nasir, Taib (2023) Boxplot analysis of 4 grade agarwood essential oil for various grades. Indonesian Journal of Electrical Engineering and Computer Science, 29 (1). pp. 238-244. ISSN 2502-4752. (Published)

Anis Izzati, Ab Fauzan and Mazlina, Abdul Majid and Allegra, Mario (2018) A Review on Human Pedestrian Movement System using Agent-Based Simulation and Discrete Event Simulation. Advanced Science Letters, 24 (10). pp. 7290-7294. ISSN 1936-6612. (Published)

Anis Naema Atiyah, Rafai and Noraziah, Adzhar and Nor Izzati, Jaini (2021) A review: On path planning optimization criteria and mobile robot navigation. In: Journal of Physics: Conference Series; 28th Simposium Kebangsaan Sains Matematik, SKSM 2021 , 28 - 29 July 2021 , Kuantan, Virtual. pp. 1-8., 1988 (012036). ISSN 1742-6588 (print); 1742-6596 (online)

Anuar, Mohamed and Nur Aqilah, Othman and Hamzah, Ahmad and Mohd Hasnun Ariff, Hassan (2022) Investigation of the optimal sensor location and classifier for human motion classification. In: ICCSCE 2022 - Proceedings: 2022 12th IEEE International Conference on Control System, Computing and Engineering , 21-22 October 2022 , Penang. pp. 142-146. (184194). ISBN 978-166548339-1

Anusuiah, Vasu (2021) Investigation on cyclic degradation of thermophysical properties of paraffin wax as a phase change material and their impact on heat storage performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ftwi Yohaness, Hagos).

Anwar Ilmar, Ramadhan and Azmi, W. H. and R., Mamat (2021) Experimental investigation of thermo-physical properties of tri-hybrid nanoparticles in water-ethylene glycol mixture. Walailak Journal of Science and Technology, 18 (8). pp. 1-15. ISSN 1686-3933. (Published)

Anwary, Arif Reza and Rahman, Md Arafatur and Abu Jafar, Md Muzahid and Ul Ashraf, Akanda Wahid and Patwary, Mohammad Nuruzzaman and Hussain, Amir (2022) Deep learning enabled fall detection exploiting gait analysis. In: Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS; 44th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2022 , 11-15 July 2022 , Glasgow. pp. 4683-4686., 2022-July (182637). ISSN 1557-170X ISBN 978-172812782-8

Aqilah, Kamaruzaman and Nurul Akmal, Che Lah (2020) Formation of ZnO nanoparticles in the presence of Tannic acid. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 61-64., 41 (168124). ISSN 2214-7853

Arfat, Md and Mustafa, Abu Hasnat and Rasidi, Roslan and Mohd Hasbi, Ab. Rahim (2022) Lignin extractions from oil palm empty fruit bunch under pressurized and inert conditions. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 124..

Arif Mustaqim, Md Salleh and Ahmad Yusri Aizad, Ahamad Termuzi and Aili, Debora Anak and Nurmunira, Muhammad (2022) The installation of solar panel plant based on the site selection assessment, solar irradiance and slope analysis in malaysia. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 221..

Arifah Nadiah, Che Zainol Ariff (2016) Klik dengan bijak. Wadah (1). p. 4. ISSN 2180-0456

Ariff Nijay, Ramli (2023) Optimization of assembly line balancing with energy efficiency by using tiki-taka algorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Abd Rashid).

Ariffin, Arifuddin and A. A.M., Redhwan and A. M., Syafiq and S., Zainal Ariffin and A. R.M., Aminullah and Wan Hamzah, Azmi (2022) Stability analysis of hybrid Al2O- TiO2 nano-cutting fluids. Archives of Materials Science and Engineering, 117 (1). pp. 5-12. ISSN 1897-2764. (Published)

Arifin, Samsul and Muktyas, Indra Bayu and Al Maki, Wikky Fawwaz and Mohd Khairul Bazli, Mohd Aziz (2022) Graph coloring program of exam scheduling modeling based on bitwise coloring algorithm using python. Journal of Computer Science, 18 (1). pp. 26-32. ISSN 1549-3636. (Published)

Arifin, Zainal and Adiyasa, I. Wayan and Mohd Azri Hizami, Rasid (2022) Design optimization analysis on the performance of BLDC motors on electric bicycles. In: Journal of Physics: Conference Series ; 5th International Conference on Electrical, Electronics, Informatics, and Vocational Education, ICEELINVO 2022 , 5-6 October 2022 , Yogyakarta. pp. 1-9., 2406 (012016). ISSN 1742-6588

Arina, Mazelan (2016) Design of miniature waterjet machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Arjun, Asogan and Norazlianie, Sazali and Wan Sharuzi, Wan Harun and Devarajan, Ramasamy and Kumaran, Kadirgama (2023) Analysis of Correlation of Induced Frequency and Cream Skimming Efficiency through Ultrasonic Technology. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (1). pp. 326-333. ISSN 2462-1943. (Published)

Arman, A. Rahim (2003) E-Management Team anjur Bengkel 'System Development' peringkat IPTA seluruh Malaysia. UMP News . (Unpublished)

Arsyad, Fitriyanti (2015) Evaluation of surface roughness and power consumption in machining FCD 450 using coated and uncoated irregular milling tools. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Arun, Gupta (2021) UMP researcher received CRDF2 grant of RM 1.06 million. UMP News .

Arwa, Mukhtar and Awanis, Romli and Noorhuzaimi@Karimah, Mohd Noor and Mansoor, Abdullateef and Al-Bashiri, Hael (2012) Inventory visibility scenario to reduce safety stock in supply chain network using blockchain hyperledger composer. In: The International Conference on Software Engineering & Computer Systems , 24-26 August 2012 , Faculty of Computer Systems & Software Engineering , Universiti Malaysia Pahang.26600 Pekan , Pahang , Malaysia. pp. 1-6..

Arzielah Ashiqin, Alwi and Ahmad Najmuddin, Ibrahim and Muhammad Nur Aiman, Shapiee and Muhammad Ar Rahim, Ibrahim and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin (2020) Ball classification through object detection using deep learning for handball. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 49-54. ISSN 2637-0883. (Published)

Asghar, Rafiq and Mohd Herwan, Sulaiman and Saeed, Sarmad and Wadood, Hamid and Mehmand, Taimoor Khan and Ullah, Zahid (2022) Application of linear and nonlinear control schemes for the stability of smart grid. In: ICETECC 2022 - International Conference on Emerging Technologies in Electronics, Computing and Communication , 7-9 December 2022 , Jamshoro, Sindh. pp. 1-6. (187454). ISBN 978-166549087-0

Asghar, Rafiq and Mohd Herwan, Sulaiman and Zuriani, Mustaffa and Ali, Zohaib and Ullah, Zahid (2022) Integration of electric vehicles in smart grids : A review of the advantages and challenges of vehicle-to-grid technology. In: 2022 International Conference on IT and Industrial Technologies, ICIT 2022 , 3-4 October 2022 , Chiniot. pp. 1-7. (185677). ISBN 978-166548945-4

Asghar, Rafiq and Ullah, Zahid and Azeem, Babar and Aslam, Sheraz and Hashmi, Muhammad Harris and Rasool, Ehtsham and Shaker, Bilawal and Anwar, Muhammad Junaid and Mustafa, Kainat (2022) Wind energy potential in Pakistan : A feasibility study in sindh province. Energies, 15 (8333). pp. 1-23. ISSN 1996-1073. (Published)

Ashaa, Supramaniam and Muhammad Aizzat, Zakaria and Mohamad Heerwan, Peeie and Papaioannou, Gerogious (2022) Investigating vehicle characteristics behaviour for roundabout cornering. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang, Kuantan. 519 -528., 900. ISSN 1876-1100 ISBN 978-981192094-3

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Unsteady computational study of novel biologically inspired offshore vertical axis wind turbine at different tip speed ratios: a two-dimensional study. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6753-6772. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ashwindran Naidu, Sanderasagran (2023) An investigation of sqrt 2 conjecture inspired drag induced vertical axis wind turbine blade. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Azizuddin, Abd Aziz).

Asiah, Kassim (2022) Embracing the endemic phase - Msctils goes hybrid. Centre for Modern Languages News .

Asiah, Kassim and Ahmad Nasaruddin, Sulaiman (2010) Motivation in second language learning: Technology inside and outside classroom. In: Borneo International Conference on Language and Literature , 7-9 June 2010 , Kuching, Sarawak. pp. 1-8.. (Unpublished)

Asif, Muhammad and Hai, Faisal I. and Singh, Lakhveer and Price, William E. and Nghiem, Long D. (2017) Degradation of Pharmaceuticals and Personal Care Products by White-Rot Fungi - A Critical Review. Current Pollution Reports, 3 (2). pp. 88-103. ISSN 2198-6592. (Published)

Asmawati, Sajari and Hasnah, Haron and Ishak, Ismail (2018) Analysis of Demographics to Quality of CIO, Ethical Climate, Level of Ethics and Integrity and Organizational Commitment in the Malaysia Public Sector. In: Proceedings Book: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 341-346.. ISBN 978-967-22260-5-5

Asogan, Arjun and Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Haziqatulhanis, Ibrahim and Krishnan, Rishen Nair (2023) FTIR analysis of plant-based cellulose as adsorbents for water remediation. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 89-94.. ISSN 2195-4356 ISBN 978-981-19-4425-3

Asri Syahmi, Asnor (2022) Successful implementation of erosion and sedimentation control plan for reducing environmental impact in the construction industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahimi, Abdul Rahman).

Asri Syahmi, Asnor and Al-Mohammad, Mohammad S. and Saffuan, Wan Ahmad and Almutairi, Saud and Abdul Rahimi, Abdul Rahman (2022) Challenges for implementing environmental management plans in construction projects : The case of Malaysia. Sustainability (Switzerland), 14 (10). pp. 1-17. ISSN 2071-1050. (Published)

Asrol, Awang (2020) Covid-19 UMP laksana kuliah dalam talian. Harian Metro .

Asrol, Awang (2022) Guna PerantiSiswa sebaik mungkin. Harian Metro .

Asrol, Awang (2021) Inovasi pensyarah UMP bangunkan kandungan digital PdP. Berita Harian .

Asrol, Awang (2022) UMP cipta Rajawali. Berita Harian .

Asrol, Awang (2021) UMP lancar aplikasi ADAB. Berita Harian .

Athirah, B. and Nurul Shahida, M. S. (2021) Aircraft noise exposure and effects on the health of nearby residents: a review. In: Human Engineering Symposium, HUMENS 2021 , 22 February 2021 - 22 February 2021 , Virtual Online. pp. 361-378.. ISSN 21954356 ISBN 978-981164114-5 (In Press / Online First)

Athirah, B. and Nurul Shahida, M. S. (2019) Occupational noise exposure among airport workers in Malaysia: an ergonomic investigation. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Athirah, B. and Nurul Shahida, Mohd Shalahim (2021) Effects of aircraft noise on residents nearby a Malaysian airport. Materials Science and Engineering, 1068 (012010). pp. 1-17. ISSN 1757-899X. (Published)

Atik, Faysal and Adhreena, M S N A and Vorathin, E. and Hafizi, Z. M. and Ngui, W K (2021) Leak diagnosis of pipeline based on empirical mode decomposition and support vector machine. IOP Conf. Series: Materials Science and Engineering, 1078 (1). pp. 1-9. ISSN 1757-899X (online); 1757-8981 (Print). (Published)

Atikah, Selamat (2016) Simulation-based scheduling system at R2 Print Enterprise Kuantan. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Atirah Fatini, Zin Azmi and Shalyda, Md Shaarani @ Md Nawi and Jun Haslinda, Shariffuddin and Nasratun, Masngut and Zatul Iffah, Mohd Arshad (2021) Pineapple enzyme: Beneficial poultry supplement. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Atnaw, Samson M. and C. K. M., Faizal and Oumer, Abduaziz Jama (2017) Development of Solar Biomass Drying System. In: MATEC Web of Conferences: Engineering Technology International Conference 2016 (ETIC 2016) , 4-5 August 2016 , Ho Chi Mini City, Vietnam. pp. 1-7., 97 (01081). ISSN 2261-236X

Atnaw, Samson M. and Shaharin, A. Sulaiman and Singh, Lakhveer and Zularisam, A. W. and Wan Faizal, Wan Ishak (2017) Modeling and Parametric Study for Maximizing Heating Value of Gasification Syngas. BioResources, 12 (2). pp. 2548-2564. ISSN 1930-2126 (print); 1930-2126 (online). (Published)

Atnaw, Samson M. and Singh, Lakhveer and Hagos, F. Y. and Yousuf, Abu (2016) Road Construction Equipment Management: A Case Study on Selected Industry. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 91-97. ISSN 2289-697X. (Published)

Aui, Shwu Harn (2015) Particle size distribution measurement from different indoor activities. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Auni Hamimi, Idris and Che Azurahanim, Che Abdullah and Nor Azah, Yusof and Azren Aida, Asmawi and Mohd Basyaruddin, Abdul Rahman (2023) Nanostructured Lipid Carrier Co-Loaded with Docetaxel and Magnetic Nanoparticles: Physicochemical Characterization and In Vitro Evaluation. Pharmaceutics, 15 (5). pp. 1-19. ISSN 1999-4923. (Published)

Aw, Fong Ling and Ali, Shaitir and Ari, Legowo and Sutjipto, A. G. E. (2020) The effect of green body pressure, sintering time and electric current on ZnO crystal growth by electric current heating method. In: Postgraduate Symposium on Industrial Science and Technology (SISTEC 2019) , 22-23 Aug. 2019 , Kuantan, Malaysia. pp. 3-10., 981. ISBN 978-303571664-1

Awad, Omar I. and Zhou, Bo and Kadirgama, Kumaran and Chen, Zhenbin and Mohammed, M. N. (2024) Nonthermal plasma-assisted catalysis NH3 decomposition for COx-free H2 production : A review. International Journal of Hydrogen Energy, 56. pp. 452-470. ISSN 0360-3199. (Published)

Awani Rangers, UMP (2019) UMP Cipta Kecemerlangan bersama Industri. Astro Awani Online . (Unpublished)

Awanis, Romli (2021) Bersediakah kita ke arah Pendigitalan Kampus. UMP News .

Awanis, Romli (2023) Revolutionising Higher Education The Significance of Micro Credentials in Malaysias Hybrid Learning Environment A Success Story from UMPSA. UMPSA News .

Awanis, Romli and Setchi, Rossitza and Prickett, Paul and De la Pisa, Miguel (2016) Eco-Design Case-Based Reasoning Tool: The Integration of Ecological Quality Function Deployment and Case-Based Reasoning Methods for Supporting Sustainable Product Design. Proc IMechE Part B: Journal Engineering Manufacture. pp. 1-20. ISSN 0954-4054 (Print); 2041-2975 (Online). (Published)

Awis, Ibrahim (2015) A study on decision making in managing maintenance and building services in military organization. Faculty of Industrial Management, Universiti Malaysia Pahang.

Ayib Rosdi, Zainun and M., Ichimura (2013) Performance of n-TiO2/dye/p-Cul Incorporated with New Chelating Agent for Solid State DYE Sensitized Solar Cell Applications. In: 8th International Conference on Surface, Coatings and Nanostructured Materials (Nanosmat 2013) , 22-25 September 2013 , Granada, Spain. pp. 1-12..

Ayodele, Ozavize Freida and Ayodele, Bamidele Victor and Siti Indati, Mustapa and Fernando, Yudi (2021) Effect of activation function in modeling the nexus between carbon tax, CO2 emissions, and gas-fired power plant parameters. Energy Conversion and Management: X, 12 (100111). pp. 1-9. ISSN 2590-1745. (Published)

Ayu Andirah, Sakka (2016) Comparative studies between guidelines and actual practice of safety on site in perspective of PPE. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azad, Saiful and Mahmud, Mufti and Kamal Zuhairi, Zamli and Kaiser, M. Shamim and Jahan, Sobhana and Razzaque, Md Abdur (2024) iBUST: An intelligent behavioural trust model for securing industrial cyber-physical systems. Expert Systems with Applications, 238 (121676). pp. 1-16. ISSN 0957-4174. (Published)

Azhani, Ismail and Yuserrie, Zainuddin (2018) Lean management and HRM practices in relation towards operational performance: confirmation of measurement model. In: Proceedings Book: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 232-246.. ISBN 978-967-22260-5-5

Azhani, Zukri and Nazir, Ramli and Fatin Nabilah, Mender (2017) An Experimental Study On Stabilization Of Pekan Clay Using Polyethylene And Polypropylene. In: International Conference Of Global Network For Innovative Technology And Awam International Conference In Civil Engineering (IGNITE-AICCE’17) , 8–9 August 2017 , Penang, Malaysia. 030002-1.. ISBN 9780735415744

Azi Izwani, Nor Hamzah and Lee, Chia Kuang and Zetty Ain, Kamaruzzaman and Nubli, Abdul Wahab (2020) The development of healing environment concept: a review. In: The 5th International Conference on Civil and Environmental Engineering for Sustainability , 19-20 December 2019 , Johor, Malaysia. pp. 1-5., 498 (1). ISSN 1755-1307

Azian, Ibrahim and Fernando, Yudi (2023) Ten-year thematic review and future trends of green warehouse. International Journal of Management Concepts and Philosophy. pp. 400-412. ISSN 1741-8135. (In Press / Online First) (In Press / Online First)

Aziman, Abdullah (2021) Kesejahteraan digital. UMP News .

Aziman, Abdullah and Adzhar, Kamaludin and Awanis, Romli (2020) Uncovered user engagement pattern in LMS During COVID-19 pandemic using temporal visualization matrix. In: ETCCE 2020 - International Conference on Emerging Technology in Computing, Communication and Electronics , 21-22 December 2020 , Virtual, Dhaka. pp. 1-5. (9350899). ISBN 978-166541962-8

Azinuddin Zulfahmi, Megat (2020) CryoTransmission Electron Microscopy a reliable technique or just another expensive attachment. UMP News .

Azizan, Ramli and Mohamad Ezuan, Abdul Jalil (2017) Addressing the Practice of Safety Management in Halal Industry - An Overview and A Step Towards Sustainable Cooperation. International Journal of Engineering Technology And Sciences (IJETS), 8 (1). pp. 1-15. ISSN 2289-697X. (Published)

Azizan, Ramli and Tuan Sidek, Tuan Muda (2010) Pembangunan teknologi dan konservasi alam di dalam perspektif Islam. In: International Conference on Arts, Social Sciences and Technology 2010 , 2010 , The Gurney Hotel, Pulau Pinang. pp. 1-12.. (Unpublished)

Azizi, Amir and Razieh, Maleki (2014) Comparative Study of AHP and ANP on Multi-Automotive Suppliers with Multi-Criteria. In: Proceedings of Proceedings of the International MultiConference of Engineers and Computer Scientists,Vol II, (IMECS 2014) , 12-14 March 2014 , Hong Kong. pp. 1-6..

Azizol Heirey, Bahari and Zamzuri, Hamedon (2022) Lean management in quality improvement of cutting and hot forming process for window tint. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 70..

Azizul Hafiz, Abdullah and Muhammad Najamuddin, Selamat and Nadzirah, Mohd Mokhtar (2021) Design and performance analysis of cooling tower. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Azizul Helmi, Sofian (2021) Manfaat kreativiti teknologi seni bina tangani impak banjir. Berita Harian .

Azizul Helmi, Sofian (2023) Melestari Keberdayaan Program Pendidikan TVET Aras Tinggi. UMP News .

Azizul Helmi, Sofian (2021) Salinity of our oceans can help us predict the effects of climate change. UMP News .

Azizul Helmi, Sofian (2023) Sustaining the High-Level TVET Education Programme. UMPSA News .

Azizul Helmi, Sofian (2023) TVET Courses Go Global FTKKPs Global Classroom Welcomes Sanden Corporation Japans Expert on Sustainable Lubrication Solutions for Industry. UMP News .

Azizul Helmi, Sofian (2021) Ts. Dr. Farhan wanita pertama dilantik ahli fatwa panel teknikal oleh Muslim Professional Japan Association MPJA. UMP News .

Azizul Helmi, Sofian (2022) What can we do in light of the Global Risks Report 2022 s ranking of the world s greatest threats. UMP News .

Azizul Helmi, Sofian and Rozaimi, Abu Samah and Nur Aminatulmimi, Ismail (2023) FTKKP shines at CITREX 2023 with outstanding innovations and research achievements. FTKKP News .

Azlee, Zabidi and Mohd Izham, Mohd Jaya and Wan Isni Sofiah, Wan Din and Hasliza, Abu Hassan and Ihsan, Mohd Yassin (2021) Non-Linear Autoregressive with exogenous input (Narx) chiller plant prediction model. In: 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 24-26 August 2021 , Pekan. pp. 1-6.. ISBN 978-1-6654-1407-4

Azlina, Ismail and Intan Suhana, Mohd Razelan and Lydia, Mohd Yusof and Adnan, Zulkiple and Khairil Azman, Masri (2021) An overview of pavement maintenance management strategies in Malaysia. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Malaysia. pp. 1-10., 682 (012042). ISSN 1755-1307

Azlina, Ismail and Liyana, Mohamed Yusof and Intan Suhana, Mohd Razlan (2023) Pedestrian behaviour at unsignalized zebra crossing : A case study in UMP Gambang campus. In: IOP Conference Series: Earth and Environmental Science; 2022 World Sustainable Construction Conference, WSCC 2022 , 14-15 October 2022 , Kuala Lumpur. pp. 1-11., 1140 (012023). ISSN 1755-1307

Azlinda, Zainal Abidin (2014) Kelantangan di laman media sosial bukti emosi atasi ilmu. Berita Harian .

Azma, Abdullah and Rohani, Abu Bakar (2023) A review: software safety requirement analysis model in critical software development. In: E-Proceeding MIC 2023. Multidisciplinary International Conference 2023 (MIC2023) , 6 - 7 Mac 2023 , Tenera Hotel Bangi, Malaysia. III-113.. ISBN 978-629-98017-0-2

Azmana, Motia and Mohd Azmir, Arifin and Syed, Mahmood (2022) Review on transfersomes : Promising carrier for transdermal drug delivery. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 151..

Azra Shakira, Hassan and Nurul Huda, Abu Bakar (2022) Structural, optical and morphological properties of pure and silver doped zinc oxide thin films. In: Materials Today: Proceedings, 3rd Symposium on Industrial Science and Technology (SISTEC2021) , 25-26 August 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1376-1380., 51 (Part 2). ISSN 2214-7853

Azrad, Mohamad Hashim and Mohd Rashidi, Salim and Hummad Habib, Qazi and Muhammad Yusof, Mohd Noor and Asrul Izam, Azmi and Mohd Haniff, Ibrahim and Hadi, Manap (2023) Effect of surface roughness on sensitivity of unclad fiber-optic sensors. In: Journal of Physics: Conference Series; 4th International Conference on Emerging Electrical Energy, Electronics and Computing, ICE4CT 2022 , 28-29 December 2022 , Hybrid, Arau. pp. 1-10., 2550 (012018). ISSN 1742-6588

Azreen Harina, Azman and Nurul Nadrah Aqilah, Tukimat and M. A., Malek (2020) Analysis of Climate-Net Unit Generated (NUG) Relationship for the Hydroelectric Power Station. In: ICDSME 2019: International Conference on Dam Safety Management and Engineering , 19-21 November 2019 , Penang, Malaysia. pp. 594-605.. ISSN 978-981-15-1971-0

Azrin, Abdul Aziz and Muhammad Yusri, Ismail (2021) Spark plug fault recognition using classification method in a spark ignition engine. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Azrin, Abdul Aziz and Muhammad Yusri, Ismail and K., Sudhakar and C W, Mohd Nor and A, Zainal and Anwar, P. P. Abdul Majeed (2021) An overview of the spark plug engine profile in a spark ignition engine. IOP Conf. Series: Materials Science and Engineering, 1092 (012030). pp. 1-12. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Azrin, Abdul Aziz and Muhammad Yusri, Ismail and M.H., Mat Yasin and A., Zainal (2021) Effects of park energy on spark plug fault recognition in a spark ignition engine. Energy Engineering. ISSN 0199-8595. (Unpublished) (Unpublished)

Azrina, Abd Aziz and Khatun, Fatema and Monir, Minhaj Uddin and Sim, Lan Ching and Leong, Kah Hon (2021) TiO2: A Semiconductor Photocatalyst. In: Titanium Dioxide. IntechOpen, pp. 1-17.

Azrina, Abd Aziz and Nor Afifah, Abdullah and Sandran, Nivaashini (2021) Pt-tnts for conversion of carbon dioxide to methane. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Azrina, Abd Aziz and Nurnisa Aqilah, Mohd Rapidi and Ummi Aqila, Suhaimi (2021) Carbon quantum-dots(cqds)-titanium nanotubes(tnts) photocatalyst for co2 conversion to ch4. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Azrul Azim, Abdullah Hashim and Salmiah, Ahmad and Nor Maniha, Abdul Ghani and Ahmad Nor Kasruddin, Nasir (2023) Integrated Modelling and Control of Linear Actuator Based Automatic Pedal Pressing Mechanism for Low-Speed Driving in a Road Traffic Delay. International Journal of Robotics and Control, 3 (3). pp. 485-500. ISSN 2775-2658. (Published)

Azwin Arif, Abdul Rahim and Mohamed Amin, Embi and Rosseni, Din and Supyan, Hussin and Norazah, Mohd Nordin and Nor Yazi, Khamis and Mohd Shafeirul Zaman, Abd Majid (2017) Confirmation of elements in mobile language learning framework for engineering and technology. In: Malaysian International Conference On Academic Strategies In English Language Teaching , 1-2 November 2017 , IDCC, Shah Alam Selangor. pp. 1-12.. (Unpublished)

B

B.A., Solahuddin and Yahaya, F. M. (2023) A state-of-the-art review on experimental investigation and finite element analysis on structural behaviour of fibre reinforced polymer reinforced concrete beams. Heliyon, 9 (e14225). pp. 1-35. ISSN 2405-8440. (Published)

BOTS, team (2021) TECH SM4RT Tani enters partnership with key agriculture players, launches UrusTani. New Straits Times .

Baarath, Kunjunni (2016) Implementation of platooning strategy for autonomous mobile robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Babu Arigela, Sri Satya Veerendra (2022) Hybrid power management for fuel cell-supercapacitor powered hybrid electric vehicle. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rusllim, Mohamed).

Badhrulhisham, Abdul Aziz (2014) Memperkasa kerjaya, pendidikan teknologi kejuruteraan. Berita Harian, (18 Ma . pp. 28-29.

Badraddin, Abdulmalek Khaled Mohammed and Afiqah R., Radzi and Almutairi, Saud and Rahimi, A. Rahman (2022) Critical success factors for concrete recycling in construction projects. Sustainability, 14 (5). pp. 1-19. ISSN 2071-1050. (Published)

Bakhit, Abdelmoneim Ahmed and Mohd Faizal, Jamlos and Alhaj, Nura Abdalrhman and Rizalman, Mamat (2022) Biofloc farming with IoT and machine learning predictive water quality system. In: Proceedings - 2022 RFM IEEE International RF and Microwave Conference, RFM 2022 , 19-21 December 2022 , Kuala Lumpur. pp. 1-4. (187406). ISBN 978-166548977-5

Bakhit, Abdelmoneim Ahmed and Mohd Faizal, Jamlos and Alhaj, Nura Abdalrhman and Rizalman, Mamat and Hamza, Jamilu B. (2022) Smart home applications based on internet of things: Current scenario, issues and proposed solutions. In: 2022 IEEE International RF and Microwave Conference (RFM) , 19-21 December 2022 , Kuala Lumpur. pp. 1-4. (187406). ISBN 978-166548977-5

Bakiss Hiyana, Abu Bakar and Hamzah, Ahmad (2021) H∞ filter with fuzzy logic estimation to refrain finite escape time. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer, Singapore, pp. 978-981. ISBN 978-981-33-4597-3

Bakiss Hiyana, Abu Bakar and Hamzah, Ahmad (2022) H∞Filter with fuzzy logic estimation : An analysis to refrain Finite Escape Time (FET). In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 909-921., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6

Bakr, Zinab Hassanien Hassanien (2019) Synthesis and characterization of tin based hybrid nanofibers and nanoflowers as photoelectrode in dye-sensitized solar cells. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Balfaqih, M. and Jabbar, W. and Khayyat, M. and Hassan, R. (2021) Design and development of smart parking system based on fog computing and internet of things. Electronics (Switzerland), 10 (24). pp. 1-18. ISSN 2079-9292. (Published)

Balsam A. J., Mustafa and Mazlina, Abdul Majid (2023) The Role of Metamodeling in Systems Development. In: Encyclopedia of Data Science and Machine Learning. IGI Global, pp. 2421-2436. ISBN 9781799892205

Bambang Widi, Pratolo and Nur, Fatimah and Soviyah, . and Zuraina, Ali (2022) Digital literacy readiness Voices of Indonesian primary and secondary English teachers. English Language Teaching Educational Journal, 5 (2). pp. 129-142. ISSN 2621-6485. (Published)

Bamgbade, J.A. and Hosany, Mohammad Mehdi and Ajibike, W. A. and Chai, C.S. (2023) Green supply chain nuances in east malaysian construction industry. International Journal Of Construction Management. pp. 1-10. ISSN 1562-3599 (Print) 2331-2327 (Online). (Published)

Bamgbaded, J. A. and Fung, Evena Shallonia and Moshood, Taofeeq Durojaye and Kamaruddeen, Ahmed Mohammed and Liew, San Chuin (2023) The dynamics of ecological sustainability in housing delivery: Developers’ perspectives. Architectural Engineering and Design Management, 19 (2). pp. 183-199. ISSN 1745-2007. (Published)

Baranitharan, E. (2014) The Potentiality of microbial fuel cell anode with enhanced electron transfer. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Bari, Bifta Sama and Islam, Md Nahidul and Rashid, Mamunur and Hasan, Md Jahid and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Ahmad Fakhri, Ab. Nasir and Majeed, Anwar P.P. Abdul (2021) A real-time approach of diagnosing rice leaf disease using deep learning-based faster R-CNN framework. PeerJ Computer Science, 7 (e432). pp. 1-27. ISSN 2376-5992. (Published)

Baridula, Ravinder Reddy (2018) Effect of deposition of nanoparticles during joining of dissimilar metals by friction stir welding. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Baridula, Ravinder Reddy and Abdullah, Ibrahim and C. K. M., Faizal and Kulkarni, Ratnakar and Ramaraju, Ramgopal Varma (2017) Influence of groove size and reinforcements addition on mechanical properties and microstructure of friction stir welded joints. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-8., 319 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Bashir, M. Nasir and Saad, Hafiz Muhammad and Muhammad, Rizwan and Quazi, Moinuddin Mohammed and Ali, Muhammad Mahmood and Ahmed, Arslan E.M. and Zaidi, Asad Ali and Soudagar, Manzoore Elahi M. and Haseeb, Abdul S.Md Abdul and Naher, Sumsun (2022) Effects of tin particles addition on structural and mechanical properties of eutectic Sn–58Bi solder joint. Journal of Materials Science: Materials in Electronics, 33 (28). pp. 22499-22507. ISSN 0957-4522. (Published)

Basir, Zahrom (2016) Sumber gula glikosaminoglikan daripada sisa ikan. Berita Harian (342). V4.

Batrisyia, Rizal and Rassem, Taha H. (2021) Malaysian sign language mobile app. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Benziane, Ali and Suryanti, Awang and Lebcir, Mohamed (2021) Development and implementation of a video watermarking method based on DCT transform. International Arab Journal of Information Technology, 18 (2). pp. 140-147. ISSN 1683-3198. (Published)

Beriache, M'hamed and Cherki, Brahim Hicham and Mokhtar Saïdia, Leila and Nor Azwadi, Che Sidik and Rizalman, Mamat (2023) Heat transfer enhancement through different heat sink/impinging air jet parameters an experimental approach. Mechanika, 29 (1). pp. 27-33. ISSN 1392-1207. (Published)

Bhallamudi, Ramkiran and Kumarasamy, Sudhakar and Sundarabalan, Chinnayan Karuppaiyah (2021) Effect of dust and shadow on performance of solar photovoltaic modules : Experimental analysis. Energy Engineering: Journal of the Association of Energy Engineering, 118 (6). pp. 1827-1838. ISSN 0199-8595. (Published)

Bhuyar, Prakash and Farez, Fakhrul and Mohd Hasbi, Ab. Rahim and Gaanty Pragas, Maniam and Natanamurugaraj, Govindan (2021) Removal of nitrogen and phosphorus from agro-industrial wastewater by using microalgae collected from coastal region of peninsular Malaysia. African Journal of Biological Sciences, 3 (1). pp. 1-9. ISSN 2663-2187. (Published)

BinJubeir, Mohammed and Ali Ahmed, Abdul Ghani and Mohd Arfian, Ismail and Sadiq, Ali Safaa and Muhammad Khurram, Khan (2019) Comprehensive survey on Big Data Privacy Protection. IEEE Access, 8. pp. 2067-2079. ISSN 2169-3536. (Published)

Bing, Kho Yap and Rahimah, Jusoh and Mohd Zuki, Salleh and Zulkhibri, Ismail and Mohd Hisyam, Ariff (2021) Influence of viscous dissipation on the boundary layer flow of Cu-Al2O3 hybrid nanofluid. JP Journal of Heat and Mass Transfer, 23 (2). pp. 235-246. ISSN 0973-5763. (Published)

Brapakaran, Paranitharan and Abdullah, N. A. Z. and M. Fouzi, S. M. and Sani, M. S.M. (2019) Correlation of numerical and experimental analysis for dynamic behaviour of a 3 blade propeller structure. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Selangor. pp. 1-10., 1262 (012019). ISSN 1742-6588

Brendapal Kaur Thind, Jagdiesh Singh (2018) Health risk assessment of metals bound to the fine particulate matter (PM2.5) at Jalan Mahkota, Kuantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Bryan Andrew, Balasan (2021) Comparative study of bi-2223 synthesised via electrospinning and coprecipitation methods. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mazwir, Muhammad Hafiz).

Budiea, Ahmed Mokhtar Albshir and N. N.M., Azhar and Shahrul Niza, Mokhatar and Khairunisa, Muthusamy and Mohd Khairul Idham, Satar (2023) Properties of high strength concrete containing spent garnet as sand. In: IOP Conference Series: Earth and Environmental Science; International Conference on Civil and Environmental Engineering 2022, CENVIRON 2022 , 29-30 August 2022 , Penang. pp. 1-5., 1135 (012048). ISSN 1755-1307

Buhairi, Minhalina Ahmad and Mohd Foudzi, Farhana and Jamhari, Fathin Iliana and Sulong, Abu Bakar and Mohd Radzuan, Nabilah Afiqah and Muhamad, Norhamidi and Mohamed, Intan Fadhlina and Azman, Abdul Hadi and Wan Sharuzi, Wan Harun and M.S.H., Al-Furjan (2023) Review on volumetric energy density: inluence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion. Progress in Additive Manufacturing, 8 (2). pp. 265-283. ISSN 23639512. (Published)

Bujna, Marián and Lee, Chia Kuang and Kadnár, Milan and Korenko, Maroš and Baláži, Juraj (2023) New possibilities of using DEMATEL and ERPN in the new PFMEA hybrid model. Applied Sciences, 13 (3627). pp. 1-21. ISSN 2076-3417. (Published)

C

C. K. M., Faizal and Norhazimah, Abdul Halim (2014) Kinetic Parameters for Bioethanol Production from Oil Palm Trunk Juice. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 8 (4). pp. 328-330. ISSN 2010-3778. (Published)

C. M., Low and A. N., Ilia Anisa and B. L., Chua and N. H., Abdurahman (2022) Investigation of the base oil properties in optimizing the demulsification. In: Journal of Physics: Conference Series, 16th International Engineering and Computing Research Conference (16th EURECA 2021) , 24 November 2021 , Virtual Conference, Taylor's University, Malaysia. pp. 1-14., 2222 (012015). ISSN 1742-6588

C. M., Ng and Liew, Nicole Siaw Ing and Nur Ailah Taklima, Zukri and Putra Jaya, Ramadhansyah and Haryati, Awang (2022) The effect of mineral bottle as fine aggregate for manufacturing sustainable road construction. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 87..

C. M. Ho, S. I. Doh and Chin, Siew Choo and X., Li (2022) Prediction of concrete residual compressive strength under elevated temperatures : Response surface methodology (rsm) approach. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 48..

C. Santhana, Krishnan and Mimi Sakinah, A. M. and Singh, Lakhveer and Zularisam, A. W. (2016) Production of Biodiesel using Tannery Fleshing as a Feedstock via Solid-state Fermentation. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 10 (5). pp. 532-537. ISSN 1307-6892. (Published)

Cao, Xiawei and Ji, Yuanfa and Sun, Xiyan and Liang, Weibin and Kamarul Hawari, Ghazali (2022) EMS decoding algorithm that introduced shuffled strategy and improved variable node update. In: 2022 7th International Conference on Computer and Communication Systems, ICCCS 2022 , 22-25 April 2022 , Wuhan. pp. 398-402. (181990). ISBN 978-166545060-7

Cha Hweay Rhunn, Tommy and Anis Farihan, Mat Raffei and Nur Shamsiah, Abdul Rahman (2021) Mobile smart door security system. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Chan, Calvin Quok Qeith (2014) Interactive 3D courseware for Spanish language. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chan, Chao Shiung (2016) Design of software code to improve the accuracy of shrimp grading machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chan, Ming Ting (2014) Certificate authentication system using QR code. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chan, W. S. and Rozaimi, Abu Samah and Norazwina, Zainol and Abdul Sahli, Fakharudin and Suraini, Abd-Aziz and Phang, Lai Yee (2019) Modeling of vanillin adsorption from aqueous solution using resin H103 by artificial neural network. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-13., 702 (012048). ISSN 1757-8981

Chandrathevan, Sathiamurthy (2022) Multi-Robot Learning with Bat Algorithm With Mutation (Bam). College of Engineering, Universiti Malaysia Pahang.

Chandrikka, Vasudavan (2014) FSKKP bachelor's degree project title management system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chang, Jian Fei (2015) Design and development of smart car parking system using arduino and android. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chang, Ling Shing (2015) Mobile patient appoinment and helping system for emergency. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chang, Siaw Sang and Suriyati, Saleh and Noor Asma Fazli, Abdul Samad (2021) Oil palm waste to green energy : Co-torrefied oil palm pellet (Co-TOPP). In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Che Abdul Hafiz, Che Yahya (2018) Study on current status of water quality and heavy metals around Tasik Chini. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Che Dini Marini, Che Mohammad Ishkandar El-Rahimin and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2020) Investigation of wear performance of friction stir processed aluminium metal matrix composites. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1740-1744., 46 (169722). ISSN 2214-7853

Che Dini Marini, Che Mohammad Ishkandar El-Rahimin and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2020) Morphological study of friction stir processed aluminium metal matrix composites. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1745-1748., 46 (169722). ISSN 2214-7853

Che Ku Aili Nurfateen, Che Ku Ahmad (2012) Assessing flow accumulation area of Sungai Kuantan watershed using GIS techniques. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Che Ku Eddy Nizwan, Che Ku Husin (2022) Establishment of spectral subtraction-based algorithm for experimental modal analysis under operating condition. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fairusham, Ghazali).

Che Lah, Nurul Akmal and Murthy, Puhanes (2023) Microwave-Processable Cu Nanostructures -the Morphology and Chemical Properties. In: Materials Today Proceedings: International Conference on Separation Technology 2023 , 18-19 February 2023 , Johor Bahru, Johor, Malaysia. pp. 1-2.. ISSN 2214-7853 (In Press / Online First)

Che Mohammad Nizam, Che Kamaruddin (2019) Effects of environmental ergonomic factors towards muscles activities for lifting task. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Che Mohd Nasril, Che Mohd Nassir and Mohd Khairul Izamil, Zolkefley and Muhammad Danial, Che Ramli and Haziq Hazman, Norman and Hafizah, Abdul Hamid and Muzaimi, Mustapha (2022) Neuroinflammation and COVID-19 ischemic stroke recovery—Evolving evidence for the mediating roles of the ACE2/Angiotensin-(1–7)/Mas Receptor Axis and NLRP3 Inflammasome. International Journal of Molecular Sciences, 23 (3085). pp. 1-23. ISSN 1661-6596. (Published)

Che Mohd Nasril, Che Mohd Nassir and Mohd Khairul Izamil, Zolkefley and Muhammad Danial, Ramli and Haziq Hazman, Norman and Hafizah, Abdul Hamid and Muzaimi, Mustapha (2022) Neuroinflammation and COVID-19 ischemic stroke recovery—Evolving evidence for the mediating roles of the ACE2/angiotensin-(1–7)/mas receptor axis and NLRP3 inflammasome. International Journal of Molecular Sciences, 23 (6). pp. 1-23. ISSN 1661-6596. (Published)

Che Muhamad Asad Safwan, Che Aziz and Norhafidzah, Mohd Saad and Mohammad Fadhil, Abas and Suliana, Ab Ghani and Ali, Abid (2022) Optimization of distributed generation using mix-integer optimization by genetic algorithm (MIOGA) Considering Load Growth. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 245-255., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4

Cheah, Jit Choon (2014) Personal financial planning using rule based expert system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chen, Choy Yuen (2009) Productivity improvement for pusat kesihatan pelajar (PKP) by using witness simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Cheng, Wai Kit and Ismail, Mohd Khairuddin and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman (2020) The classification of heart murmurs: The identification of significant time domain features. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 36-43. ISSN 2637-0883. (Published)

Cheng, Wong See and Rassem, Taha Hussein (2021) 3D game-based learning music theory with augmented reality (AR). In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Cheng, Yoke Wang and Chong, Chi Cheng and Cheng, Chin Kui and Wang, Chi Hwa and Ng, Kim Hoong and Witoon, Thongthai and Lam, Man Kee and Lim, Jun Wei (2024) Long-term evaluation of palm oil mill effluent (POME) steam reforming over lanthanum-based perovskite oxides. Journal of Environmental Management, 351 (119919). pp. 1-13. ISSN 0301-4797. (Published)

Cheok, Jia Wei (2023) Seismic performance of high-rise building under different excitation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Saffuan, Wan Ahmad).

Cheong, Yong Jian (2014) Parental control for mobile application. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chew, Mann Yee (2018) Incident investigation tracking system based on process safety management. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Chiam, Siew Ting (2016) Design selection of floating brake calliper magnesium hybrid composites. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chilakamarry, Chaitanya Reddy (2022) Optimization of solid state fermentation parameters for bioethanol production from waste glycerol using immobilized escherichia coli. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Chilakamarry, Chaitanya Reddy and Dr. Mimi Sakinah, Abdul Munaim and Zularisam, Abdul Wahid and Ahamad Khilji, Irshad (2022) Growth profile study of Escherichia Coli K12 by optical density measurement. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 85..

Chilakamarry, Chaitanya Reddy and Syed, Mahmood and Siti Nadiah, Mohd Saffe and Mohd Azmir, Arifn and Gupta, Arun and Mohamed Yacin, Sikkandar and S Sabarunisha, Begum and Narasaiah, Boya (2021) Extraction and application of keratin from natural resources: a review. 3 Biotech, 11 (220). pp. 1-12. ISSN 2190-572X (print); 2190-5738 (online). (Published)

Chin, Fook Loy (2019) Bio-flotation harvesting of chlorella vulgaris microalgae using jatropha curcas L. protein-oil emulsion. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Chin, Kah Yean (2014) A study of human computer interaction in arcade game design. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chin, Siew Choo and Doh, Shu Ing and Kusbiantoro, Andri and Yih, Kang Wong and Saffuan, Wan Ahmad (2016) Characterization of Sewage Sludge Ash (SSA) in Cement Mortar. Journal of Engineering and Applied Sciences, 11 (4). pp. 2242-2247. ISSN 1819-6608. (Published)

Chong, Chee Keong (2017) Hot cold tumbler. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Choo, Xin Ying (2014) Performance analysis of voip network between KK3 & KK5 Universiti Malaysia Pahang using opnet simulator. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Choon, Cheow Shek and Ismayuzri, Ishak (2022) Feasibility study of CO, CO2, NO2 and O2 sensors for hazardous gas detection system in vehicle cabin. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 537-547., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Choong, Chun Sern (2020) Automatic detection and indication of pallet-level tagging from rfid readings using machine learning algorithms. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ab. Nasir, Ahmad Fakhri).

Chua, Gek Kee and Nur Anis, Mohamad Ariff (2017) Lipopolysaccharide Induces The Production Of Diagnostic Monoclonal Antibody By Hybridoma Cells Against Congenital Adrenal Hyperplasia. Journal of Engineering Science and Technology, 12 (11). pp. 2939-2951. ISSN 1823-4690. (Published)

Chuan, Wei Kiat (2014) The graph heuristic with great deluge algorithm to solve the ITC2007 examination timetabling problem. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Chuan, Zun Liang (2023) Monthly Mathematical Colloquium MMC 3, 2023. PSM News .

Chuan, Zun Liang and Muhamad Husnain, Mohd Noh and Mohd Akramin, Mohd Romlay and Mu, Wen Chuan (2019) The productiveness of Bootstrap simulator in evaluating the accuracy parameters of measurement system for ball screw. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019) , 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-11., 1366 (012129). ISSN 1742-6596

Chuan, Zun Liang and Wan Nur Syahidah, Wan Yusoff and Azlyna, Senawi and Mohd Akramin, Mohd Romlay and Fam, Soo-Fen and Shinyie, Wendy Ling and Ken, Tan Lit (2022) A comparative effectiveness of hierarchical and nonhierarchical regionalisation algorithms in regionalising the homogeneous rainfall regions. Pertanika Journal of Science and Technology, 30 (1). pp. 319-342. ISSN 0128-7680. (Published)

Cionita, Tezara and Siregar, Januar Parlaungan and Wong, Ling Shing and Cheng, Wan Hee and Fitriyana, Deni Fajar and Jamiluddin, Jaafar and Ramli, Junid and Irawan, Agustinus Purna and Hadi, Agung Efriyo (2022) The influence of filler loading and alkaline treatment on the mechanical properties of palm kernel cake filler reinforced epoxy composites. Polymers, 14 (3063). pp. 1-17. ISSN 2073-4360. (Published)

Computerworld Malaysia, staff (2003) Kuktem gets 10 Gigabit Ethernet network. Computerworld Malaysia, 13 (10).

Cuce, Erdem and Cuce, Pinar Mert and Carlucci, Salvatore and Sen, Harun and Sudhakar, Kumarasamy and Md., Hasanuzzaman and Daneshazarian, Reza (2022) Solar chimney power plants : A review of the concepts, designs and performances. Sustainability (Switzerland), 14 (3). pp. 1-66. ISSN 2071-1050. (Published)

Cuce, Erdem and Cuce, Pinar Mert and Sen, Harun and Sudhakar, K. and Berardi, Umberto and Serencam, Ugur (2021) Impacts of ground slope on main performance figures of solar chimney power plants: a comprehensive CFD research with experimental validation. International Journal of Photoenergy, 2021 (6612222). pp. 1-11. ISSN 1687-529X (Online). (Published)

Cuce, Erdem and Saxena, Abhishek and Cuce, Pinar Mert and Sen, Harun and Guo, Shaopeng and Sudhakar, K. (2021) Performance assessment of solar chimney power plants with the impacts of divergent and convergent chimney geometry. International Journal of Low-Carbon Technologies, 16 (3). 704 -714. ISSN 1748-1325. (Published)

Cuce, Pinar Mert and Cuce, Erdem and Sudhakar, Kumarasamy (2022) A systematic review of thermal insulation performance of hollow bricks as a function of hollow geometry. International Journal of Ambient Energy, 43 (1). pp. 4406-4415. ISSN 0143-0750. (Published)

Cucus, Ahmad and Aji, Luhur Bayu and Al Fahim, Mubarak Ali and Aminuddin, Afrig and Farida, Lilis Dwi (2022) Selection of prospective workers using profile matching algorithm on crowdsourcing platform. In: ICOIACT 2022 - 5th International Conference on Information and Communications Technology: A New Way to Make AI Useful for Everyone in the New Normal Era, Proceeding; 5th International Conference on Information and Communications Technology, ICOIACT 2022 , 24-25 August 2022 , Yogyakarta. pp. 122-126. (185076). ISBN 978-166545140-6

Cucus, Ahmad and B.A, Luhur and Al-Fahim, Mubarak Ali and Yuli Endra, Robby and Aprlinda, Yuthsi (2022) Bibliometrical analysis of workers quality on crowdsourcing based on VOS viewer. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 32..

Cynthia, Ignatius (2022) Universiti Malaysia Pahang and Aspen Technology to Build an Ecosystem of Knowledge Sharing. Business Today .

D

D., Youventharan and Rokiah, O. and Mohd Arif, S. (2021) The effects of particle breakage and shape on the strength parameters of sandy soil. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-10., 687 (012021). ISSN 1755-1315

D. J., Krishna Kishore and M. R., Mohamed and K., Sudhakar and K., Peddakapu (2022) An improved grey wolf optimization based MPPT algorithm for photovoltaic systems under diverse partial shading conditions. In: Journal of Physics: Conference Series, Third International Conference on Emerging Electrical Energy, Electronics and Computing Technologies 2021 , 16-17 December 2021 , Virtual Conference. pp. 1-14., 2312 (012063). ISSN 1742-6588

Damhuji, Rifai and Abdalla, Ahmed N. and Noraznafulsima, Khamshah and Mohd, Aizat and Mohd, Fadzli (2016) Subsurface Defects Evaluation using Eddy Current Testing. Indian Journal of Science and Technology, 9 (9). pp. 1-7. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Damhuji, Rifai and Abdalla, Ahmed N. and Ramdan, Razali and Kharudin, Ali and Faraj, Moneer A. (2017) An Eddy Current Testing Platform System for Pipe Defect Inspection Based on an Optimized Eddy Current Technique Probe Design. Sensors, 17 (3). pp. 1-24. ISSN 1424-8220. (Published)

Danial Adib, Kamaruddin (2019) Abandoned project through the medium of unfavourable economic condition in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Dar, Qamar Uz Zaman and Renhai, Pu and Sajid, Zulqarnain and Mehmood, Mubashir and Abdul, Wahab (2021) The provenance and tectonic settings of the greywacke member of the late neoproterozoic hazara formation lesser himalayas, northern pakistan: Evidence from geochemistry and petrography. Sains Malaysiana, 50 (12). pp. 3505-3522. ISSN 0126-6039. (Published)

Darren Dean, Tay and Mei-Yen, Choo and Siti Munirah, Musa and Hajar Fauzan, Ahmad (2023) Whole genome sequencing of Priestia megaterium isolated from the gut of sea cucumber (Holothuria leucospilota). Materials Today: Proceedings, 75. pp. 123-126. ISSN 2214-7853. (Published)

Das, Likhan and Aslfattahi, Navid and Khairul, Habib and Saidur, R. and Das, Anupom and Kadirgama, Kumaran (2023) Thermohydraulic performance investigation of a heat exchanger with combined effect of ribbed insert and Therminol55/MXene+Al2O3 nanofluid : A numerical two-phase approach. Heliyon, 9 (e14283). pp. 1-17. ISSN 2405-8440. (Published)

Das, Likhan and Rubbi, Fazlay and Khairul, Habib and Aslfattahi, Navid and Rahman, Saidur and Yahya, Syed Mohd and Kadirgama, Kumaran (2022) Insight into the investigation of diamond nanoparticles suspended therminol 55 nanofluids on concentrated photovoltaic/thermal solar collector. Nanomaterials, 12 (2975). pp. 1-22. ISSN 2079-4991. (Published)

Das, Likhan and Rubbi, Fazlay and Khairul, Habib and Aslfattahi, Navid and Saidur, Rahman Md and Yahya, Syed Mohd and Kadirgama, Kumaran (2022) Insight into the investigation of diamond nanoparticles suspended therminol®55 nanofluids on concentrated photovoltaic/thermal solar collector. Nanomaterials, 12 (2975). pp. 1-22. ISSN 2079-4991. (Published)

Daud, Nor Khonisah and Martynov, Sergey and Mahgerefteh, Haroun and Nasuha, Norhaslinda (2019) Compression power requirements for Oxy-fuel CO2 streams in CCS. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (1). ISSN 1757-8981

Dawood Gani, Anisha Banu and Fernando, Yudi (2021) The cybersecurity governance in changing the security psychology and security posture: insights into e-procurement. International Journal of Procurement Management, 14 (3). pp. 308-327. ISSN 1753-8440. (Published)

Deshmukh, Vaibhav N. and Radhakrishnan, S. and Kulkarni, R. R. (2017) Investigations on Thermal Conductivity, Heat Transfer Coefficient and Viscosity of Graphite Nanoparticle Dispersed Nanofluid. Journal of Nanofluids, 6 (6). pp. 1008-1016. ISSN 2169-432X (Print); 2169-4338 (Online) . (Published)

Desmond Chong Shin, Koh (2012) Transport scheduling system in SUK Pahang using heuristic method. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Devanesam SimpsoN, Emmanuel and Moorthy, Kohbalan (2021) Driver alcohol monitoring system for vehicle safety control with emergency contact. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Dhinesh, Ramotharan (2015) Unmanned aerial vehicle with night vision for tracking intruder. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Diana Surya, Abd Wahab (2018) Aplikasi myTNB berwajah baharu. Sinar Harian . p. 3.

Diana Surya, Abd Wahab (2021) Guna aplikasi Adab UMP tunai Kupon Food Campus untuk manfaat pelajar. Utusan Malaysia .

Diana Surya, Abd Wahab (2023) Perkasa TVET melalui kerjasama industri dalam kampus. UMP News .

Diana Surya, Abd Wahab (2023) Perkasa TVET melalui kerjasama industri dalam kampus. Utusan Malaysia .

Diana Surya, Abd Wahab (2016) UMP memasyarakatkan teknologi. Sinar Harian .

Diana Surya, Abd Wahab (2017) UMP rangkul anugerah di London. Sinar Harian . p. 35.

Din, Fakhrud and Kamal Zuhairi, Zamli (2022) Hyper-heuristic strategy for input-output-based interaction testing. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 967-977., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Din, Fakhrud and Kamal Zuhairi, Zamli and Abdullah, Nasser (2022) Assessing the chaotic map population initializations for sine cosine algorithm using the case study of pairwise test suite generation. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 371-380., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4

Din, Fakhrud and Khalid, Shah and Fayaz, Muhammad and Gwak, Jeonghwan and Kamal Z., Zamli and Mashwani, Wali Khan (2022) Fuzzy adaptive teaching learning-based optimization for solving unconstrained numerical optimization problems. Mathematical Problems in Engineering, 2022 (2221762). pp. 1-17. ISSN 1024-123X. (Published)

Dina Diyana, Rastam Tan (2021) AP Ir. Dr. Mohd Hafizi, Atirah announced winners of CITREx 21 Best Awards. UMP News .

Dina Diyana, Rastam Tan (2020) Penyelidikan UMP raih 10 pingat dan anugerah khas The Best Award for Consumer Electronics. UMP News . (Unpublished)

Diyana, Kamarudin (2017) Methodology (Technology). Penerbit UMP, Kuantan, Pahang. ISBN 978-967-2054-15-3

Diyana, Kamarudin and Elmokri, Razman and Yasmin, Hussain and Hu, Xiaojie and Rahman, Md Mustafizur (2021) Hear me : Assistive technology for the deaf and hearing impaired. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Dodangeh, Javad and Sorooshian, Shahryar and Afshari, Ali Reza (2014) Linguistic Extension for Group Multicriteria Project Manager Selection. Journal of Applied Mathematics, 2014. pp. 1-8. ISSN 1110-757X (print); 1687-0042 (online). (Published)

Dr. Mimi Sakinah, Abdul Munaim and Farahazwani Izazi, Mohamad and Yi Ling, Goh and Syasya Amyra, Suhana and Nur, Athirah (2021) Effect of various binding agent and tableting technique on physical properties of stevia effervescent tablets. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Drury, Brett and Drury, Samuel Morais and Rahman, Md. Arafatur and Ullah, Ihsan (2022) A social network of crime : A review of the use of social networks for crime and the detection of crime. Online Social Networks and Media, 30 (100211). pp. 1-17. ISSN 2468-6964. (Published)

Dun, Yau Ti and Mohd Faizal, Ab Razak and Mohamad Fadli, Zolkipli and Bee, Tan Fui and Ahmad Firdaus, Zainal Abidin (2021) Grasp on next generation security operation centre (NGSOC):. International Journal of Nonlinear Analysis and Applications (IJNAA), 12 (2). pp. 867-896. ISSN 2008-6822. (Published)

Duraisamy, Youventharan and Kirushna Moorthi, Jeevithan and Rokiah, Othman and T., Stark and Mohd Arif, Sulaiman (2022) Effects of concrete debris and bottom ash usage on the improvement of ballast degradation. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 105..

Dwi, Pebrianti (2021) Designing course for online learning sharing experience. UMP News (2).

Dwibedi, Swagat and Jain, Neelesh Kumar and Pathak, Sunil (2018) Investigations on joining of stainless steel tailored blanks by μ-PTA process. Materials and Manufacturing Processes, 33 (16). pp. 1851-1863. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

Dwivedi, Pushpendu and Ganesh, Sujay Ashwinraj and Kumarasamy, Sudhakar and Soni, Archana and Priya, S. Shanmuga (2023) Thermal and electrical performance of uncooled, nature-cooled, and photovoltaic thermal module. International Journal of Photoenergy, 2023 (4720545). pp. 1-12. ISSN 1687-529X (Online). (Published)

Dzulqarnain, Abu Bakar (2017) Improvising the integral approach model to address OSHMS leadership challenges at a Malaysian pipe coating facility. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Dzulqarnain, Abu Bakar and Norazura, Ismail (2015) Integral Safety Needs Analysis towards Optimizing Safety Performance in Malaysian-Based Multinational Pipe Coating Industry. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 69-80. ISSN 2289-697X. (Published)

E

E., Baranitharan and Khan, Maksudur R. and D. M. R., Prasad and Jailani, Salihon (2013) Bioelectricity Generation from Palm Oil Mill Effluent in Microbial Fuel Cell Using Polacrylonitrile Carbon Felt as Electrode. Water, Air and Soil Pollution , 224 (1533). pp. 1-11. ISSN 0049-6979 (print); 1573-2932 (online). (Published)

E. N., Engku Mat Nasir and Fatinah, Ab Rahman and S., Abd Rahim and Raihana Z., Edros and N., Anuar (2016) Effect on Operating Parameters Towards Metastable Zone Width of Carbamazepine-Saccharin Co-Crystal. In: The 18th International Conference on Crystal Growth and Epitaxy , 07-12 August 2016 , Nagoya, Japan. . (Unpublished)

Edi, Syafri and Jamaluddin, Jamaluddin and Nasmi, Herlina Sari and Melbi, Mahardika and Lisman, Suryanegara and Rafles, Sinaga and Ferriawan, Yudhanto and Rahadian, Zainul and Agus, Nugroho and Anish, Khan and Mohammad, A. Wazzan (2023) Effect of ultrafine grinding and ultrasonication duration on the performance of polyvinyl alcohol (PVA) agave gigantea cellulose micro fiber (CMF) bio-composite film. Journal Of Natural Fibers, 20 (2192545). pp. 1-19. ISSN 1544-0478. (Published)

Edward Entalai, Besi (2014) Heavy metals uptake in closed-recirculating water system for phytoremediation : a study towards aquaponic as biosensor tool for environmental biotechnology. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Edy, Supriyanto and Henry Ayu, Kartikasari and Lutfi, Rohman and Nova, Alviati and Sutjipto, A. G. E. (2020) Estimate dye sensitized solar cells performance using dyes based on green-future and local wisdom with simulation method. In: Symposium on Industrial Science and Technology , 22-23 Aug. 2019 , Kuantan, Malaysia. pp. 92-97., 981.

Ee, Jun Jiang (2014) Particle swarm optimization to solve the ITC2007 examination timetabling problem. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Eh Phon, Danakorn Nincarean and Rahman, M. H. A. and Utama, N. I. and Ali, M. B. and Halim, N. D. A. and Kasim, S. (2019) The effect of augmented reality on spatial visualization ability of elementary school student. International Journal on Advanced Science, Engineering and Information Technology, 9 (2). pp. 624-629. ISSN 2088-5334. (Published)

Elangovan, Kavery and Saravanan, Prabhu and Campos, Cristian H. and Sanhueza-Gómez, Felipe and Khan, Md Maksudur Rahman and Chin, Sim Yee and Krishnan, Santhana and Viswanathan Mangalaraja, Ramalinga (2023) Outline of microbial fuel cells technology and their significant developments, challenges, and prospects of oxygen reduction electrocatalysts. Frontiers in Chemical Engineering, 5 (1228510). pp. 1-27. ISSN 2673-2718. (Published)

Elarbe, Basem and Elganidi, Ibrahim and Norida, Ridzuan and Kamal, Yusoh and Norhayati, Abdullah and Vijaya Kumar, Shamala (2021) Application of full factorial design to screen the factors influencing the wax deposition of Malaysian crude oil. Journal of Petroleum Exploration and Production Technology, 12. pp. 1829-1839. ISSN 2190-0558. (Published)

Elarbe, Basem and Elganidi, Ibrahim and Norida, Ridzuan and Kamal, Yusoh and Norhayati, Abdullah and Vijayakumar, Shamala (2021) Synthesis, characterization and evaluation of stearyl acrylate-co-behenyl acrylate copolymer as a pour point depressant of waxy crude oil. Journal of Petroleum Exploration and Production Technology, 12. pp. 1811-1828. ISSN 2190-0558. (Published)

Elganidi, I. and Elarbe, B. and Ridzuan, N. and Abdullah, N. (2021) Optimisation of reaction parameters for a novel polymeric additives as flow improvers of crude oil using response surface methodology. Journal of Petroleum Exploration and Production Technology, 12 (2). 437 -449. ISSN 2190-0558. (Published)

Elganidi, I. and Elarbe, B.S. and Norhayati, Abdullah and N., Ridzuan (2019) Characterization of a novel terpolymer containing maleic anhydride-co-stearyl methacrylate-cobenhely acrylate for wax inhibition application. IOP Conference Series: Materials Science and Engineering, 702 (1). pp. 12-27. ISSN 17578981. (Published)

Elganidi, Ibrahim and Elarbe, Basem and Norida, Ridzuan and Norhayati, Abdullah (2020) Synthesis of a novel terpolymer of (BA-co-SMA-co-MA) as pour point depressants to improve the flowability of the Malaysian crude oil. Materials Today: Proceedings, 42 (1). pp. 28-32. ISSN 2214-7853. (Published)

Elganidi, Ibrahim and Elarbe, Basem and Norida, Ridzuan and Norhayati, Abdullah (2021) A review on wax deposition issue and its impact on the operational factors in the crude oil pipeline. Malaysian Journal of Fundamental and Applied Sciences, 17 (1). pp. 44-49. ISSN 2289-5981. (Published)

Elghdban, Mohamed Ghayth and Nurhidayah, Azmy and Adnan, Zulkiple and Al-Sharafi, Mohammed A. (2020) Factors Affecting the Adoption of Advanced IT with Specific Emphasis on Building Information Modeling Based on TOE Framework: A Systematic Review. International Journal of Advanced Science and Technology (IJAST), 29 (4). pp. 3314-3333. ISSN 2005-4238. (Published)

Elghdban, Mohamed Ghayth and Nurhidayah, Azmy and Adnan, Zulkiple and Al-Sharafi, Mohammed A. (2021) A systematic review of the technological factors affecting the adoption of advanced IT with specific emphasis on building information modeling. In: Recent Advances in Intelligent Systems and Smart Applications. Studies in Systems, Decision and Control, 295 . Springer Nature, Switzerland AG, pp. 29-42. ISBN 978-3-030-47411-9

Elham, Falatoonitoosi and Shamsuddin, Ahmed and Sorooshian, Shahryar (2014) A Multi-Criteria Framework to Evaluate Supplier's Greenness. Abstract and Applied Analysis . pp. 1-12. (Published)

Ellie Yi, Lih Teo and Lingeswarran, Muniandy and Eng, Poh Ng and Farook, Adam and Abdul Rahman, Mohamed and Rajan, Jose and K. F., Chong (2016) High Surface Area Activated Carbon from Rice Husk as a High Performance Supercapacitor Electrode. Electrochimica Acta, 192. pp. 110-119. ISSN 0013-4686. (Published)

Elmahaishi, Madiha Fathi and Raba’ah Syahidah, Azis and Ismayadi, Ismail and Muhammad Syazwan, Mustaffa and Zulkifly, Abbas and Khamirul Amin, Matori and Farah Diana, Muhammad and Nor Kamilah, Saat and Rodziah, Nazlan and Idza Riati, Ibrahim and Nor Hapishah, Abdullah and Nurhidayaty, Mokhtar (2021) Structural, electromagnetic and microwave properties of magnetite extracted from mill scale waste via conventional ball milling and mechanical alloying techniques. Materials, 14 (22). pp. 1-24. ISSN 1996-1944. (Published)

Elmutasim, Imadeldin Elsayed and Izzeldin Ibrahim, Mohamed Abdelaziz and Bilal, Khalid Hamid (2023) Seawater salinity modelling based on electromagnetic wave characterization. International Journal of Electrical and Computer Engineering (IJECE), 13 (4). pp. 4112-4118. ISSN 2088-8708. (Published)

Elmutasima, Imadeldin Elsayed and Izzeldin Ibrahim, Mohamed Abdelaziz and Bilal, Khalid Hamid (2023) Scrutinization of saline sea utilizing a water-based antenna for the radio communications. In: 2023 IEEE 2nd International Conference on AI in Cybersecurity, ICAIC 2023; 2nd IEEE International Conference on AI in Cybersecurity, ICAIC 2023 , 7-9 February 2023 , Houston. pp. 1-4.. ISBN 979-835039696-6

Elmy Johana, Mohamad and Kian Sek, Tee and Choon, Chewchang and Omar Mohd Faizan, Marwah and Mimi Mohaffyza, Mohamad and Noor Nazihah, Mohd Noor and Ruzairi, Abdul Rahman and Jaysuman, Pusppanathan and Mohd Hafiz, Fazalul Rahiman and Yasmin, Abdul Wahab and Suzanna, Ridzuan Aw (2022) Smart farming IoT based management during post Covid-19. In: 2022 2nd International Conference on Emerging Smart Technologies and Applications, eSmarTA 2022 , 25-26 October 2022 , Ibb. pp. 1-7. (184190). ISBN 978-166546181-8

Elneel, Duha Awad and Abdul Sahli, Fakharudin and Ahmed, Elsadig Musa and Abdullateef, Mansoor (2022) Stakeholder identification overview and challenges in requirements engineering prospective. In: 2nd International Conference on Computing and Information Technology, ICCIT 2022 , 5-27 January 2022 , University of Tabuk, Saudi Arabia. 314 -319.. ISBN 978-166543605-2

Eltwati, Ahmed Salama and Azman, Mohamed and Mohd Rosli, Hainin and Jusli, Euniza and Enieb, Mahmoud (2022) Rejuvenation of aged asphalt binders by waste engine oil and SBS blend : Physical, chemical, and rheological properties of binders and mechanical evaluations of mixtures. Construction and Building Materials, 346 (128441). pp. 1-18. ISSN 0950-0618. (Published)

Elzein, Nahla Mohammed and Mazlina, Abdul Majid and Hashem, Ibrahim Abaker Targio and Ashraf Osman, Ibrahim and Abulfaraj, Anas W. and Binzagr, Faisal (2023) JQPro : Join query processing in a distributed system for big RDF data using the hash-merge join technique. Mathematics, 11 (5). pp. 1-20. ISSN 2227-7390. (Published)

Emilawati, Othman and Nik Nor Fatihah, Nik Mood and Radhiyah, Abd Aziz (2022) Investigation the effect of different fraction EG : H the stability of tio2 nanofluid. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 118..

Emilia, Adzmi (2012) Lecture timetabling using heuristic technique. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Emiliano, Bellini (2023) Cooling solar panels with bio inspired coconut fiber. PV Magazine .

Emma Melati, Buhanuddin (2016) UMP formed partnerships with us universities to reinforce its engineering technology programme. Pekan Review, 11 . pp. 20-21. ISSN 2180-3099

Emma Melati, Burhanuddin (2016) Pertemuan dua hala FTeK - LJM bincang teknologi kejuruteraan. UMP News . (Unpublished)

Emma Melati, Burhanuddin (2016) UMP jalin hubungan baik dengan IPT Amerika Syarikat bagi memperkasa bidang teknologi kejuruteraan. UMP News . (Unpublished)

Emma Melati, Burhanuddin and Nurul Nadia, Nor Hamran (2015) UMP terokai peluang kerjasama dengan University of Houston Amerika Syarikat untuk program Teknologi Kejuruteraan. CREATE . p. 7. ISSN 1823-7487

Endot, N. A. and Junid, R. and Jamil, M. S. S. (2021) Insight into biomass upgrade: A review on hydrogenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF). Molecules, 26 (22). pp. 1-20. ISSN 1420-3049. (Published)

Engku Nadia, Engku Mat Nasir (2022) Crystal size distribution characterisation of Carbamazepine-saccharin co-crystal in batch cooling crystallisation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah, Abd Rahim).

Enidran, Loganathan (2018) Development of propolis powder for encapsulation via freeze drying method : purification and freeze drying process of extracted propolis. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Erdiwansyah, E. and Gani, Asri and Rizalman, Mamat and Mahidin, M. and Sudhakar, Kumarasamy and S. M., Rosdi and Husin, Husni (2022) Biomass and wind energy as sources of renewable energy for a more sustainable environment in Indonesia: a review. Archives of Environmental Protection, 48 (3). pp. 57-69. ISSN 2083-4772. (Published)

Erdiwansyah, Erdiwansyah and Mahidin, Mahidin and Husin, Husni and Nasaruddin, Nasaruddin and Gani, Asri and Faisal, Muhammad and Muhtadin, Muhtadin and Zaki, Muhammad and Rizalman, Mamat (2023) Comparison of temperature, radiation rate, heat loss, furnace and thermal efficiencies of different plates in the FBC combustion chamber. Frontiers in Heat and Mass Transfer, 20 (29). pp. 1-9. ISSN 2151-8629. (Published)

Erdiwansyah, Erdiwansyah and Mahidin, Mahidin and Husni, Husin and Nasaruddin, Nasaruddin and Asri, Gani and Rizalman, Mamat (2023) Modification of perforated plate in fluidized-bed combustor chamber through computational fluid dynamics simulation. Results in Engineering, 19 (101246). pp. 1-12. ISSN 2590-1230. (Published)

Erma Yusnida, Jusoh (2017) Alat mudahkan juadah dihidang. Sinar Harian . p. 42.

Erma Yusnida, Jusoh (2017) Kempen satu rumah satu kebun. Sinar Harian . p. 39.

Erma Yusnida, Jusoh (2017) UMP proaktif hasilkan inovasi. Sinar Harian . p. 36.

Ernawan, Ferda and Afrig, Aminuddin and Eh Phon, Danakorn Nincarean and Alsheikh, Emad Addin and Wibowo, Adi (2022) Self-Recovery in Fragile Image Watermarking Using Integer Wavelet Transform. In: 2022 IEEE 8th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) , Melaka, Malaysia. pp. 21-25. (183892). ISSN 978-166548800-6

Ernawan, Ferda and Zuriani, Mustaffa and Bayuaji, Luhur (2016) An Efficient Image Compression Using Bit Allocation based on Psychovisual Threshold. Information (Japan), 19 (9B). pp. 4177-4182. ISSN 1343-4500. (Published)

Ernawati, Muji and Ernawan, Ferda and Abbker, Yagoub and Fakhreldin, Mohammad Adam Ibrahim and Adi, Prajanto Wahyu (2022) Image splicing forgery approachs: A review and future direction. In: Proceedings - International Conference on Informatics and Computational Sciences; 6th International Conference on Informatics and Computational Sciences, ICICoS 2022 , 28-29 September 2022 , Virtual, Online. pp. 134-139., 2022 (183902). ISSN 2767-7087 ISBN 978-166546099-6

Erny Haslina, Abd Latib (2023) Characterisation of Malaysia agarwood oil (aquilaria sp.) and comparison with different origins based on sensory studies. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Saiful Nizam, Tajuddin).

Erny Haslina, Abd Latib and A.K.M., Moyeenul Huq and Seema, Zareen and Saiful Nizam, Tajuddin (2023) Gas chromatography mass spectrometry couple with quadrupole time-of-flight (GC-QTOF MS) as a powerful tool for profiling of oxygenated sesquiterpenes in agarwood oil. Arabian Journal of Chemistry, 16 (105025). pp. 1-9. ISSN 1878-5352. (Published)

Erny Haslina, Abd Latib and Nurlaila, Ismail and Saiful Nizam, Tajuddin and Jasmin, Jamil and Zakiah, Mohd Yusoff (2022) k-nearest neighbor modelling of agarwood oil samples available in capital of Malaysia market. International Journal of Electrical and Computer Engineering, 12 (3). pp. 3158-3165. ISSN 2088-8708. (Published)

Esmail Abdullah, Mohammed Basheer (2021) Development of hybrid microfluidics chip for water desalination and purification. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Essa, Wafa K. and Yasin, Suhad A. and Abdullah, Anwar H. and Thalji, Mohammad R. and Saeed, Ibtisam A. and Assiri, Mohammed A. and Chong, Kwok Feng and Ali, Gomaa A. M. (2022) Taguchi L25 (54) approach for methylene blue removal by polyethylene terephthalate nanofiber‐multi‐walled carbon nanotube composite. Water, 14 (8). pp. 1-16. ISSN 2073-4441. (Published)

Eswaramoorthi, Vijayamurugan and Kuan, Garry and Mohamad Razali, Abdullah and Anwar, P. P. Abdul Majeed and Suppiah, Pathmanathan K. and Musa, Rabiu Muazu (2022) Design and validation of a virtual physical education and sport science–related course: A learner’s engagement approach. International Journal of Environmental Research and Public Health, 19 (13). pp. 1-16. ISSN 1661-7827. (Published)

Eswaramoorthi, Vijayamurugan and Muhammad Zulhusni, Suhaimi and Mohamad Razali, Abdullah and Zulkefli, Sanip and Anwar, P. P. Abdul Majeed and Muhammad Zuhaili, Suhaimi and Clark, Cain C. T. and Musa, Rabiu Muazu (2022) Association of physical activity with anthropometrics variables and health-related risks in healthy male smokers. International Journal of Environmental Research and Public Health, 19 (12). pp. 1-15. ISSN 1661-7827. (Published)

Etdal, Bakhiet (2021) Biomineralization of hydroxyethyl cellulose/sodium alginate impregnated with cellulose nanocrystals by using surface modification technique. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zulkifli, Farah Hanani).

Ezahan Hilmi, Zakaria and Mohd Azraai, Mohd Razman and Jessnor Arif, Mat Jizat and Ismail, Mohd Khairuddin and Zelina Zaiton, Ibrahim and Anwar, P. P. Abdul Majeed (2021) Time-series classification vegetables in detecting growth rate using machine learning. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 1-5. ISSN 2637-0883. (Published)

Ezazi, Mohammadamin and Quazi, Moinuddin Mohammed (2023) Recent developments in two-dimensional materials-based membranes for oil–water separation. Membranes, 13 (677). pp. 1-24. ISSN 2077-0375. (Published)

Ezhilnavaroji, Jeroish Zachariah and Bhuvaneshwari, K. S. and Futane, Abhishek and Fahmi, Samsuri and Narayanamurthy, Vigneswaran (2023) Design, optimization, fabrication and analysis of Cu microheater for loop-mediated isothermal amplification (LAMP) applications. Materials Today Communications, 36 (106663). ISSN 2352-4928. (Published)

Ezrin Hani, Sukadarin (2021) Teknologi Intervensi Cuaca dan Aplikasi Big Data untuk elakkan banjir dan kehilangan harta benda. UMP News .

Ezrin Hani, Sukadarin and Baba, M. Deros and Jaharah, A. Ghani and Ahmad Rasdan, Ismail and Nursyazwani, Mohd Nawi and Norhidayah, Abdull (2016) Validity Test For Simple Ergonomics Risk Assessment (SERA) Method. Malaysian Journal of Public Health Medicine, 1 (Suppl.). pp. 134-143. ISSN 1675-0306. (Published)

Ezrin Hani, Sukadarin and Baba, M. Deros and Nur Syazwani, Mohd Nawi and Jaharah, A. Ghani and Ahmad Rasdan, Ismail and Junaidah, Zakaria (2016) A Preliminary Study of Postural Problems among Oil Palm Workers: Is OWAS Method Suitable to Investigate Those Problems? International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 79-90. ISSN 2289-697X. (Published)

Ezrin Hani, Sukadarin and Baba, Md Deros and Nur Syazwani, Mohd Nawi and Jaharah, A. Ghani and Ahmad Rasdan, Ismail and Junaidah, Zakaria (2016) Back Pain and the Observed Factors among Oil Palm Workers. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 70-78. ISSN 2289-697X. (Published)

Ezrin Hani, Sukadarin and Hanida, Abdul Aziz and Junaidah, Zakaria and Joharizal, Johari and Mimi Nabila, Mohd Noordin and Mohd Hafizi, Che Mat and Mohd Shamsul Azmi, Samsudin and Mohd Fauzan, Mohd and Nur Fazrina, Mohd Salleh (2017) Occupational safety and health risk management in pineapple plantation. In: Proceedings of 4th National Conference on Knowledge Transfer , 11-12 December 2017 , Kedah. pp. 220-225.. (Unpublished)

Ezrin Hani, Sukadarin and Norhidayah, Abdull and Junaidah, Zakaria and Abdullah, Ibrahim (2016) Psychosocial issue among office workers: a case study at a Public Higher Education Institution in Malaysia. The Social Sciences, 11 (18). pp. 4534-4538. ISSN 1818-5800 (Print); 1993-6125 (Online). (Published)

Ezrin Hani, Sukadarin and Nurud Suria, Suhaimi and Hanida, Abdul Aziz and H., Osman and Mohd Nazri, Noordin and I., Shafiee (2018) Analysis of road accident fatality in malaysia: body part injury. In: 2nd Conference Of Asean Road Safety (CARS 2018) , 4 - 6 Disember 2018 , Summit Hotel, Subang. pp. 1-8.. (Unpublished)

Ezrin Hani, Sukadarin and zuhaidi, Mohd Jawi@Said (2021) Gayat Memandu selepas bencana Covid-19, perlukah Brek Kecemasan Automatik AEB. UMP News .

F

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and Zahari, Taha and K., Kadirgama and Nasrul Hadi, Johari (2015) The Investigation of Mechanical Properties on Natural Fiber Composites for Recurve Bow Material Selection. Advances in Environmental Biology, 9 (25). pp. 27-31. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

F. R. M., Romlay (2013) Increasing performance of rotary ultrasonic motor through stator modification. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

FMT, Reporters (2023) TVET degree programmes for polytechnics in the pipeline. Daily Express .

Faculty of Engineering Technology, . (2019) OSH Studens won first place in noise and ergonomic category of IH2C intervarsity short video competition organized by department of occupational safety and health (DOSH). Bulletin Ftech, 1 . pp. 1-3.

Fadhel, Mahmoud Muhanad and Razali, Muda and Hamzah, Abdulwahhab Essa and Norazida, Ali and Mohd Saiful, Dzulkefly Zan and Norhana, Arsad (2022) Microsecond pulse generation in an actively q-switched all-pm fiber laser based on an electro-optic modulator. In: 2022 IEEE 9th International Conference on Photonics, ICP 2022 , 8-10 August 2022 , Kuala Lumpur. pp. 31-32. (183601). ISBN 978-166542766-1

Fadhilah, Che Jamil and Adam Shariff Adli, Aminuddin (2018) Preliminary study of malaysian eco-friendly car selection by using analytic hierarchy process. In: The International Conference On Mathematics: Pure, Applied And Computation (ICOMPAC 2018) , 20 Oktober 2018 , Mercure Hotel, Palu, Indonesia. pp. 1-9.. (Submitted)

Fadilah, Siali and Liu, Yao and Cheng, Jack Kie (2013) Inventory Management and Logistics Cost Reduction: A Case of a Malaysia Herbal Medicine Company. Technology and Investment, 4 (3). pp. 204-212. (Published)

Fadwa Sameeha, Ismail and Kamal, Yusoh and Anis Sakinah, Zainal Abidin and Abu Hannifa, Abdullah and Zulhelmi, Ismail (2019) Three different types of tea as surfactant in liquid exfoliation of graphite : Green tea, black tea and oolong tea. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (1). ISSN 1757-8981

Fadzlina, Mohd Fadzil and Fernando, Yudi (2018) Exploring Drivers of Closed Loop Supply Chain in Malaysian Automotive Industry. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5378-5387. ISBN 9781522522553

Faeiz Azizi, Adnan (2019) Contour generation for mask projection stereolithography 3D printing. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Romlay, Fadhlur Rahman).

Faezah, Isa and Haslinda, Zabiri and Noorlisa, Harun and Azmi, Mohammad Shariff (2022) CO2 Removal via an environmental green solvent, K2CO3-Glycine (PCGLY ) : Investigative analysis of a dynamic and control study. ACS Omega, 7 (22). pp. 18213-18228. ISSN 2470-1343. (Published)

Fahim, Fayaz and He, Chao and Goel, Avishek and Rintala, Jukka and Konttinen, Jukka (2023) Oxidative ethanol dry reforming for production of syngas over Co-based catalyst : Effect of reaction temperature. Materials Today Communications, 35 (105671). pp. 1-7. ISSN 2352-4928. (Published)

Faida, Rahim (2023) Kerap guna gajet antara punca masalah kesihatan mental kanak-kanak - Dr Noradilah. Astro Awani .

Faida, Rahim and Noradilah, Md Nordin (2023) Penggunaan skrin terlalu lama tingkat potensi kemurungan kanak-kanak. Astro Awani .

Fairuz, Jasmi and Fernando, Yudi (2018) Notions of Maritime Green Supply Chain Management. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5465-5475. ISBN 9781522522553

Faisal, Jusoh (2015) UMP kongsi amalan terbaik penggunaan teknologi dalam P&P. CREATE . p. 40. ISSN 1823-7487

Faisal Abdullah, Sakhar Al Amry (2016) A risk assessment study on electronic voting system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Cheng, Jack Kie).

Faiz, Azizul and Haziman, Zakaria and Diyana, Kamarudin and Nur Kamaliah, Amer (2021) ZENHACHI- Modern and safe stingless bee nest for housing area. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Faiz, Mohd Turan and Daniel Osezua, Aikhuele and Kartina, Johan (2017) Reliability information to support decision making for e-Government projects. In: 3rd International Conference on Communication and Information Processing, ICCIP 2017 , 24-26 November 2017 , Tokyo, Japan. pp. 1-6.. ISBN 978-145035365-6

Faizarul Akmal, Jamaludin (2008) Roll forming simulation for automotive bumper fixing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Faizatul Farhana, Farush Khan (2020) Pelapis penyelidikan negara. Berita Harian . p. 4.

Faizatul Farhana, Farush Khan (2014) Saingan inovasi kreatif. Berita Harian .

Fakhira Faaiqah, Hasan and Nur Aisha Wahida, Mohd Zahidi and Vivi Safitri, Bahar and Umi Rabiatul Ramzilah, P. Remli and Azrina, Abd Aziz (2022) Carbon quantum dots (CQDs) based composites photocatalyst for wastewater purification. In: Materials Science Forum; 3rd Postgraduate Symposium on Industrial Science and Technology, SISTEC 2021 , 25 - 26 August 2021 , Virtual, Online. pp. 111-117., 1056. ISSN 0255-5476 ISBN 978-303571649-8

Fakhreldin, Mohammed Adam Ibrahim and Khalid, Edris and Jasni, Mohamad Zain and Tuty Asmawaty, Abdul Kadir and Khalid, Adam (2014) Reversible Watermarking Based on Sorting Prediction Scheme. In: International Conference on Computer, Communication and Control Technology (I4CT 2014) , 2–4 September 2014 , Langkawi. .

Fakhreldin, Mohammed Adam Ibrahim and Solanki, Dhanesh and Jasni, Mohamad Zain and Mazlina, Abdul Majid and Mohamad Fadli, Zolkipli (2014) Study of Security Layers Under Attack on Different Layers of Cloud Computing. Wulfenia Journal. ISSN 1561-882X. (In Press / Online First) (In Press / Online First)

Falatoonitoosi, Elham and Shamsuddin, Ahmed and Sorooshian, Shahryar (2014) A Multicriteria Framework to Evaluate Supplier's Greenness. Abstract and Applied Analysis, 2014. pp. 1-12. ISSN 1085-3375 (Print); 1687-0409 (Online). (Published)

Falatoonitoosi, Elham and Zulkiflle, Leman and Sorooshian, Shahryar (2013) Modeling for Green Supply Chain Evaluation. Mathematical Problems in Engineering, 2013 (201208). pp. 1-9. ISSN 1024-123X (print); 1563-5147 (online). (Published)

Farag, Mohannad and Abdul Nasir, Abd Ghafar and Alsibai, Mohammed Hayyan (2019) Grasping and Positioning Tasks for Selective Compliant Articulated Robotic Arm using Object Detection and Localization: Preliminary Results. In: IEEE 6th International Conference on Electrical and Electronics Engineering (ICEEE 2019) , 16-17 April 2019 , Istanbul, Turkey. pp. 284-288.. ISBN 978-1-7281-3910-4

Farag, Mohannad and Norsinnira, Zainul Azlan and Alsibai, Mohammad Hayyan (2018) Development of anthropomorphic robotic hand driven by Pneumatic Artificial Muscles for robotic applications. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-10., 342 (1). ISSN 1757-8981

Farah Aina, Mohamad Jamal and Ruzairi, Abdul Rahim and Nasarudin, Ahmad and Juliza, Jamaludin and Fazlul Rahman, Mohd Yunus and Yasmin, Abdul Wahab and Nur Arina Hazwani, Samsun Zaini and Rajan, Navintiran and Ahmad Ridhwan, Wahap (2022) A study on the arrival time of ultrasonic waves in concrete material. In: Lecture Notes in Electrical Engineering; 3rd International Conference on Control, Instrumentation and Mechatronics Engineering, CIM 2022 , 2-3 March 2022 , Virtual, Online. pp. 83-92., 921 LNEE (280399). ISSN 1876-1100 ISBN 978-981193922-8

Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Krishnan, Santhana and Sulaiman, Haspina and Zularisam, Abdul Wahid and Mohd Nasrullah, Zulkifli (2022) Advanced techniques in the production of biochar from lignocellulosic biomass and environmental applications. Cleaner Materials, 6 (100137). pp. 1-17. ISSN 2772-3976. (Published)

Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Krishnan, Santhana and Zularisam, Abdul Wahid and Mohd, Nasrullah (2022) Dyes removal from textile wastewater by agricultural waste as an absorbent – A review. Cleaner Waste Systems, 3 (100051). pp. 1-15. ISSN 2772-9125. (Published)

Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Krishnan, Santhana and Zularisam, Abdul Wahid and Mohd, Nasrullah (2022) The effects of chemical modification on adsorbent performance on water and wastewater treatment - A review. Bioresource Technology Reports, 20 (101259). pp. 1-12. ISSN 2589-014X. (Published)

Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Krishnan, Santhana and Zularisam, Abdul Wahid and Nasrullah, Mohd (2022) The synthetization of activated carbon from electrocoagulated palm oil mill effluent sludge for wastewater treatment. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 98..

Farah Amalina, Ishak and Krishnan, Santhana and Zularisam, Abdul Wahid and Mohd, Nasrullah (2024) Pristine and modified biochar applications as multifunctional component towards sustainable future : Recent advances and new insights. Science of The Total Environment, 914 (169608). pp. 1-22. ISSN 0048-9697. (Published)

Farah Amalina, Ishak and Krishnan, Santhana and Zularisam, Abdul Wahid and Mohd Nasrullah, Zulkifli (2023) Recent advancement and applications of biochar technology as a multifunctional component towards sustainable environment. Environmental Development, 46 (100819). pp. 1-17. ISSN 2211-4645. (Published)

Farah Ameelia, Mohammad and Siti Zubaidah, Ismail (2020) Designing product-service system inventory control: System requirements analysis of raw material in automotive industry. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 159-164.. ISBN 978-981-15-0950-6

Farah Hanani, Zulkifli (2015) Biomimetic scaffolds based on hydroxyethyl cellulose for skin tissue engineering. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jahir Hussain, Fathiima Shahitha).

Farah Nadiah, Sidek and Suriyati, Saleh and Noor Asma Fazli, Abdul Samad (2022) Kinetic parameter estimation for drying stage during gasification of empty fruit bunch. In: Materials Today: Proceedings, 3rd Symposium on Industrial Science and Technology (SISTEC2021) , 25-26 August 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1338-1343., 51 (Part 2). ISSN 2214-7853

Farah Nur Arina, Baharudin and Nor Azlina, Ab. Aziz and Mohamad Razwan, Abdul Malek and Anith Khairunnisa, Ghazali and Zuwairie, Ibrahim (2022) Indoor comfort and energy consumption optimization using an inertia weight artificial bee colony algorithm. Algorithms, 15 (395). pp. 1-21. ISSN 1999-4893. (Published)

Farah Nur Arina, Baharudin and Nor Azlina, Ab. Aziz and Mohamad Razwan, Abdul Malek and Zuwairie, Ibrahim (2021) Optimization of user comfort index for ambient intelligence using dynamic inertia weight artificial bees colony optimization algorithm. In: Lecture Notes in Mechanical Engineering; 8th International Conference on Robot Intelligence Technology and Applications, RiTA 2020 , 11-13 December 2020 , Virtual, Online. pp. 351-363.. ISSN 2195-4356 ISBN 978-981-16-4803-8

Farah Nurshahida, Mohd Subakir and Nazikussabah, Zaharudin and Subramaniam, Suganthi R. and W. I., Wan Faizal and Nurul Aini, Mohd Azman (2020) Physicochemical, physical characteristics and antioxidant activities of three edible red seaweeds (Kappaphycus alvarezii, Eucheuma spinosum and Eucheuma striatum) from Sabah, Malaysia. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur. pp. 1-8., 991 (012001). ISSN 1757-8981

Farghaly, Alaa Taiseer and Mazlina, Abdul Majid (2019) A study on Green IT awareness among University Malaysia Pahang students. In: The International Conference on E-Learning (ICOEL2019) , 21-22 August 2019 , Universiti Malaysia Sarawak (UNIMAS), Sarawak, Malaysia. pp. 1-9..

Farhan, Mohd Said and Mohamad Al Aamin, Razali (2019) Effect of factors on the red pigment production in the stirred drum bioreactor: fractional factorial design approach. In: AIP Conference Proceedings: Proceedings Of The 2nd International Conference On Biosciences And Medical Engineering (ICBME2019) , 11-12 April 2019 , Bali, Indonesia. pp. 1-8., 2155 (020008). ISBN 978-073541900-1

Farhan, Mohd Said and Nor Farhana, Hamid (2016) Factorial Design Screening For the Red Pigment Production By Monascus Purpureus FTC 535. Jurnal Teknologi, 78 (11-2). pp. 13-17. ISSN 2180-3722. (Published)

Farhan, Mohd Said and Nor Farhana, Hamid (2019) Natural red colorant via solid-state fermentation of oil palm frond by Monascus purpureus FTC 5356: effect of operating factors. Journal of Engineering Science and Technology, 14 (5). pp. 2576-2589. ISSN 1823-4690. (Published)

Farhan Anis, Azhar and Mahfuzah, Mustafa and Norizam, Sulaiman and Rashid, Mamunur and Bari, Bifta Sama and Islam, Md Nahidul and Hasan, Md Jahid and Nur Fahriza, Mohd Ali (2022) The Classification of Electrooculogram (EOG) through the application of Linear Discriminant Analysis (LDA) of selected time-domain signals. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 583-591., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Farhan Nabil, Mohd Noor and Wan Hasbullah, Mohd Isa and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Ahmad Fakhri, Ab Nasir and Abdul Majeed, Anwar P. P. (2022) The diagnosis of diabetic retinopathy : An evaluation of different classifiers with the inception V3 model as a feature extractor. In: Lecture Notes in Networks and Systems; 9th International Conference on Robot Intelligence Technology and Applications, RiTA 2021 , 16-17 December 2021 , Daejeon. pp. 392-397., 429 LNNS (276219). ISSN 2367-3370 ISBN 978-303097671-2

Farhana, Kaniz and Kadirgama, Kumaran and Faisal Mahamude, Abu Shadate and Jose, Rajan (2024) Review of MXenes as a component in smart textiles and an adsorbent for textile wastewater remediation. Chinese Chemical Letters, 35 (108533). pp. 1-15. ISSN 1001-8417 (print); 1878-5964 (online). (Published)

Faridah, Taju Rahim and Yuserrie, Zainuddin (2018) Technological innovation capabilities and competitive advantage: a measurement model using PLS-SEM in the automotive Industry in Malaysia. In: Proceedings Book: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 313-327.. ISBN 978-967-22260-5-5

Farra Herliena, Md Zin and Fahmi, Samsuri (2022) Investigation of traffic sign image classification for self driving car. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 158..

Farzad, Tahriri and Zahari, Taha (2010) The Concept of Integrating Virtual Group (VG) and Agile Supplier Selection (ASS). Journal of Business Management and Economics, 1 (1). pp. 32-37. (Published)

Fatchurrohman, Nanang and F.M., Fakharuddin and S., Puteh and H., Puteri (2018) A prototype for communitizing technology: development of smart salt water desalination device. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences ICITES 2018 , 01-02 March 2018 , UMP Pekan, Pahang. p. 1., 342 (1). ISSN 17578981

Faten, Albtoush and Doh, Shu Ing and Abdul Rahimi, Abdul Rahman and Ja’far A., Aldiabat Al-Btoosh and Syeda Maria, Zaidi (2020) Factors affecting the accuracy of cost estimate in construction projects: a review. In: National Conference for Postgraduate Research (NCON-PGR 2020) , 9 December 2020 , Virtual Mode. pp. 1-8..

Faten Ahada, Mohd Azli and Abdul Aziz, Mohd Azoddein (2020) Removal of chemical oxygen demand (COD) and total suspended solid (TSS) using electrocoagulation process for treatment of oleochemical wastewater. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress 2019, ESChE 2019 , 17-19 July 2019 , Kuala Lumpur. pp. 1-9., 736 (022104). ISSN 1757-8981

Fathie, Ahmad Zakil and Khai Qi, Low and Norfaznila, Mohammad and Nur Adila Aida, Salahutheen and Khaled Nasser, Aldafri (2021) Waste to wealth : Low cost fruiting body substrate for pleurotus ostreatus cultivation using various agro-industrial wastes in Malaysia: application of natural calcium source. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Fatimah, Dzaharudin (2014) Numerical study of the dynamics of microbubble clusters in ultrasonic fields. PhD thesis, The University of Melbourne (Contributors, UNSPECIFIED: UNSPECIFIED).

Fatimah, Dzaharudin and Azrina, Md Ralib and Ummu Kulthum, Jamaludin and Mohd Basri, Mat Nor and Afidalina, Tumian and Har, Lim Chiew and Ceng, T. C. (2020) Mortality prediction in critically ill patients using machine learning score. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30-31 July 2019 , Kuantan. pp. 1-12., 788 (012029). ISSN 1757-8981

Fatimah, Dzaharudin and Najihah, Mohd Ali and Erny Afiza, Alias and Ummu Kulthum, Jamaludin (2018) Effects of Shell Encapsulation on the Nonlinear Dynamics of a Microbubble Contrast Agent subjected to Acoustic Energy. MATEC Web of Conferences, 225 (04015). pp. 1-6. ISSN 2261-236X. (Published)

Fatin Atiqah, Rasdin (2019) Effective bracing system for telecommunication towers. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Azira, Abd Rahim and Nurhuda Dini, Faridon and Mazni, Ismail and Ruwaida, Abdul Rasid and A., Kadri and Engliman, N. S. (2022) Microwave torrefaction of sawdust as biomass energy source. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 206..

Fatin Farisha Alia, Azmi and Mohd Fakhrul Zamani, Abdul Kadir and Aziz, Shujahadeen B. and Saifful Kamaluddin, Muzakir (2019) Characterization of opto-electronic properties of thermally evaporated ZnO. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018, AMC 2018 , 27-28 November 2018 , Kuching, Sarawak. pp. 179-184., 29. ISSN 2214-7853

Fatin Nur Amalina, Zainol and Mohd Zamri, Ibrahim (2022) Implementation of artificial neural network to recognize numbers from voice. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 895-904., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4

Fatin Umi Syahirah, Md Saad and Nurjannah, Salim and Rasidi, Roslan (2021) Physical and mechanical properties of kenaf/seaweed reinforced polypropylene composite. In: Materials Today: Proceedings; 3rd Symposium on Industrial Science and Technology, SISTEC 2021 , 25 - 26 August 2021 , Kuantan, Pahang. pp. 1372-1375., 51. ISSN 2214-7853

Fatin Zafirah, Mansur and C. K. M., Faizal and Monir, Minhaj Uddin and Nur Asma Fazli, Abdul Samad and Atnaw, Samson M. and Shaharin Anwar, Sulaiman (2020) Co-gasification between coal/sawdust and coal/wood pellet: A parametric study using response surface methodology. International Journal of Hydrogen Energy, 45 (32). pp. 15963-15976. ISSN 0360-3199. (Published)

Fatin Zafirah, Mansur and Che Ku Mohammad Faizal, Che Ku Yahya and Noor Asma Fazli, Abdul Samad and Atnaw, Samson Mekbib and Shaharin, Sulaiman (2019) Experimental studies on gasification performance of sawdust and sawdust pellet in a downdraft biomass gasifier. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 5 (2). pp. 22-28. ISSN 0126-8139. (Published)

Fatin Zulaikha, Mohd Hatanan (2016) The effect of sheet thickness to formability using hyperform. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Fatinah, Mohd Rahalim and Juliza, Jamaludin and Syarfa Najihah, Raisin and Irneza, Ismail and Yasmin, Abdul Wahab and Ruzairi, Abdul Rahim and Mus’ab, Sahrim and Sharma Rao, Balakrishnan and Wan Zakiah, Wan Ismail and Farah Aina, Jamal Mohamad and Nur Arina Hazwani, Samsun Zaini (2021) Analysis on clarity of rubies gemstones using charge-coupled device (CCD). Journal of Tomography System & Sensors Application, 4 (1). pp. 80-84. ISSN 2636-9133. (Published)

Fatinah, Mohd Rahalim and Juliza, Jamaludin and Syarfa Najihah, Raisin and Wan Zakiah, Wan Ismail and Irneza, Ismail and Ruzairi, Abdul Rahim and Yasmin, Abdul Wahab (2022) An application of charge-coupled Device (CCD) tomography system for gemological industry - a review. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 31-41. (277979). ISSN 1876-1100 ISBN 978-981192094-3

Fatkhurrahman, Manani and Siti Zubaidah, Ismail (2019) Product-service system inventory control for Malaysian Palm Oil Industry: A case study utilizing IDEF0 modelling. iMEC-APCOMS 2019. pp. 153-158. ISSN 978-981-15-0949-0. (Published)

Fatmawati, Adam and Jurida, Jamaludin and Siti Hana, Abu Bakar and Ruwaida, Abdul Rasid and Zulkafli, Hassan (2020) Evaluation of hard capsule application from seaweed: Gum Arabic-Kappa carrageenan biocomposite films. Cogent Engineering, 7 (1). pp. 1-17. ISSN 2331-1916. (Published)

Faturachman, Danny (2012) Rescue Boat Design Utilizing Reused Plastic Bottles For Accident Preventation. In: 2nd International Conference on Mechanical and Manufacturing Engineering , 6-8 June 2012 , Putrajaya International Convention Centre. .

Faturachman, Danny and Shariman, Mustafa (2012) Indonesian'€™s Ship Safety Assessment Strategy. In: International Conference on Technology Management & Technopreneurship (IC-TMT 2012) , 6-7 February 2012 , Melaka. . (Unpublished)

Faturachman, Danny and Shariman, Mustafa (2012) Performance of Safety Sea Transportation. Procedia - Social and Behavioral Sciences. (Published)

Faturachman, Danny and Shariman, Mustafa (2012) Sea Transportation Accident Analysis In Indonesia. In: The 2012 International (Spring) Conference on Asia Pacific Business Innovation and Technology Management , 13-15 January 2012 , Pattaya, Thailand . .

Faturachman, Danny and Shariman, Mustafa (2012) Trend Analysis of Ship Accidents in Indonesia. World Academy of Science, Engineering and Technology (2 (Jan). ISSN 2010-376x; 2010-3778 (electronic). (Published)

Fauzan, Nur Syafiqah and Makhilan, Nazmi 'Imran (2021) Safety assessment system for food premises. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Fayaz, Fahim and Ahmad Ziad, Sulaiman and Singh, Sharanjit and Akbari, Sweeta (2018) Effect of co2 partial pressure on dry reforming of ethanol for hydrogen production. International Journal of Innovative Research and Scientific Studies, 1 (1). pp. 6-10. ISSN 2617-6548. (Published)

Fayaz, Fahim and Herma Dina, Setiabudi and Nguyen Vo, Dai-Viet and Nguyen Thi, Anh Nga and Thong Lee, Minh Pham and Huong Thi, Danh and Bawadi, Abdullah (2018) Hydrogen production form ethanol dry reforming over lanthania-promoted Co/Al2O3 catalyst. IIUM Engineering Journal, 19 (1). pp. 24-33. ISSN 1511-788X. (Published)

Fazal, M.A. and Sundus, F. and Masjuki, H.H. and Rubaiee, S. and Quazi, M.M. (2021) Tribological assessment of additive doped B30 biodiesel-diesel blend by using high frequency reciprocating rig test. Sustainable Energy Technologies and Assessments, 48. pp. 1439-1447. ISSN 2213-1388. (Published)

Fazeeda, Mohamad and Siti Filza, Saharin (2019) Application of discrete event simulation (DES) for queuing system improvement at hypermarket. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 330-346.. ISSN 2518-668X

Fazilah, Abdul Aziz (2021) Analytic hierarchy process and knowledge-based system integration for web-based ergonomics assessment approach in prioritizing workplace critical risk factors. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nik Mohamed, Nik Mohd Zuki).

Fazilah, Abdul Aziz and Zakri, Ghazalli and N. M. Zuki, N. M. and Amri, Isfar (2017) A Future Framework of Knowledge-Based Ergonomics Assessment System at Workplace in Automotive Assembly Plant. In: Advances in Social & Occupational Ergonomics. Advances in Intelligent Systems and Computing, 487 (Pt. II). Springer International Publishing, Switzerland, pp. 93-105. ISBN 978-3-319-41687-8 (Print); 978-3-319-41688-5 (Online)

Fazleena, Aziz (2016) 'More jobs for TVET grads'. New Straits Times . p. 13.

Feizollah, Ali and Nor Badrul, Anuar and Mehdi, Riyadh and Ahmad Firdaus, Zainal Abidin and Ainin, Sulaiman (2022) Understanding COVID-19 halal vaccination discourse on facebook and twitter using aspect-based sentiment analysis and text emotion analysis. International Journal of Environmental Research and Public Health, 19 (10). pp. 1-17. ISSN 1661-7827. (Published)

Feng, Tan wei and Raihana Zahirah, Edros and Ngahzaifa, Ab Ghani and Siti Umairah, Mokhtar and Dong, Ruihai (2024) Prediction of blood-brain barrier permeability of compounds by machine learning algorithms. Journal of Advanced Research in Applied Sciences and Engineering Technology, 33 (2). pp. 269-276. ISSN 2462-1943. (Published)

Ferdous, Talukdar Raian and Hasan, Rifath and Alam, Mohammad Khurshed and Islam, Muhammad Muinul and Rahman, Md Asadur (2022) A simple design of a Matlab-Based function for topographical presentation of FNIRS Data. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 511-519., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4

Fernando, Yudi and Amirulhusni, Suhaini and Tseng, Ming-Lang and Abideen, Ahmed Zainul and Muhammad Shabir, Shaharudin (2023) A smart warehouse framework, architecture and system aspects under industry 4.0: A bibliometric networks visualisation and analysis. International Journal of Logistics Research and Applications. pp. 1-24. ISSN 1367-5567. (In Press / Online First) (In Press / Online First)

Fernando, Yudi and Jasmi, Muhamad Fairuz Ahmad and Wahyuni-TD, Ika Sari and Mergeresa, Fineke and Khamis, Kamarul Azman and Fakhrorazi, A and Omar, Rusdi (2022) Supply chain integration and halal frozen meat product returns. Journal of Islamic Marketing, ahead-of-print (ahead-of-print). pp. 1-27. ISSN 1759-0833. (In Press / Online First) (In Press / Online First)

Fernando, Yudi and Mohammed Hammam, Mohammed Al-Madani and Muhammad Shabir, Shaharudin (2023) COVID-19 and global supply chain risks mitigation: Systematic review using a scientometric technique. Journal of Science and Technology Policy Management. pp. 1-26. ISSN 2053-4620. (In Press / Online First) (In Press / Online First)

Fernando, Yudi and Mukui, JM (2023) Leftover Materials and Circular Economy 4.0: Applications and Implications. International Journal of Procurement Management, 17 (3). pp. 346-367. ISSN 1753-8440. (Published)

Fernando, Yudi and Nor Hazwani, Mohd Rozuar and Mergeresa, Fineke (2021) The blockchain-enabled technology and carbon performance: Insights from early adopters. Technology in Society, 64 (1). p. 101507. ISSN 0160-791X. (Published)

Fernando, Yudi and Shaharudin, Muhammad Shabir and Herwin, Ika Sari Wahyuni (2021) 2ReLogCarChain using blockchain technology for carbon footprint tracking and monitoring. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Fernando, Yudi and Tseng, Ming-Lang and Wahyuni-TD, Ika Sari and Sroufe, Robert and Mohd-Zailani, Nik Ida Amiera (2022) Blockchain technology adoption for carbon trading and energy efficiency: ISO manufacturing firms in Malaysia. International Journal of Logistics Research and Applications. pp. 1-22. ISSN 1367-5567. (In Press / Online First) (In Press / Online First)

Fernando, Yudi and Wahyuni-TD, Ika Sari and Abideen, Ahmed Zainul and Mergeresa, Fineke (2022) Traceability technology, halal logistics brand and logistics performance: Religious beliefs and beyond. Journal of Islamic Marketing, 1 (1). pp. 1-25. ISSN 1759-0833. (Published)

Fernando, Yudi and Wahyuni-TD, Ika Sari and Gui, Anderes and Ikhsan, Ridho Bramulya and Mergeresa, Fineke and Yuvaraj, Ganesan (2022) A mixed-method study on the barriers of industry 4.0 adoption in the Indonesian SMEs manufacturing supply chains. Journal of Science and Technology Policy Management, ahead-of-pri. pp. 1-18. ISSN 2053-4620. (Published)

Fikrah, Admin (2022) UMP raih 14 pingat emas di ITEX 2022. Fikrah Pahang .

Firdaus, Basrawi and Chandran, Puganesa (2021) PV cools: Close loop water cooling system for PV module. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Firdaus, Ismail and Hwai Ern, Eng and Teoh, Chee Shan and Abdul Syukor, Abd Razak (2022) Phytoremediation and bioremediation of heavy metal from domestic wastewater by lepironia articulata, monochoria vaginalis and typha angustifolia. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 197..

Firdaus, Muhammad-Sukki and Siti Hawa, Abu Bakar and Abu Bakar, Munir and Siti Hajar, Mohd Yasin and Roberto, Ramirez-Iniguez and Scott, G. McMeekin and Brian, G. Stewart and Narbin, Sarmah and Tapas, Kumar Mallick and Ruzairi, Abdul Rahim and Md. Ershadul, Karim and Salman, Ahmad and Razman, Mat Tahar (2014) Feed-in tariff for Solar Photovoltaic: The Rise of Japan. Renewable Energy, 68. pp. 636-643. ISSN 0960-1481. (Published)

Firwana, Younis M.S. and Mohd Khairul Izamil, Zolkefley and Hasnetty Zuria, Mohamed Hatta and Rowbin, Christina and Che Nasril, Che Mohd Nassir and Muhammad Hafiz, Hanafi and Mohd Shafie, Abdullah and Keserci, Bilgin M. and Lannin, Natasha A. and Muzaimi, Mustapha Regional cerebral blood perfusion changes in chronic stroke survivors as potential brain correlates of the functional outcome following gamiied home-based rehabilitation (IntelliRehab)—a pilot study. Journal of NeuroEngineering and Rehabilitation, 19 (94). pp. 1-14. ISSN 1743-0003. (Published)

Fitriady, Muhammad Arifuddin and Nurizzatul Atikha, Rahmat and Ahmad Faiz, Mohammad (2022) Effect of mesh refinement on vertical and lateral velocity profiles of the wake flow behind a spire based on cfd. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 160..

Foong, Kevin Wei Pin (2014) School interaction system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Forid, M. S. and Rahman, M. A. and Aluwi, M. F. F. M. and Uddin, M. N. and Roy, T. G. and Mohanta, M. C. and Huq, A. K. M. M. and Zakaria, Z. A. (2021) Pharmacoinformatics and uplc-qtof/esi-ms-based phytochemical screening of combretum indicum against oxidative stress and alloxan-induced diabetes in long–evans rats. Molecules, 26 (15). pp. 1-30. ISSN 1420-3049. (Published)

Forid, Md Shaekh and Roney, Miah and Uddin, Md. Nazim and Huq, A. K.M.Moyeenul and Mohd Hamzah, Mohd Nasir and Mohd Fadhlizil Fasihi, Mohd Aluwi and Muhammad Saupi, Azuri and Wan Maznah, Wan Ishak (2024) Wound Healing Activity of Pyrazole-thiazole Derivatives of Curcumin Through the Docking, Pharmacokinetics, MD Simulation and MM/GBSA Approaches. International Journal of Chemical and Biochemical Sciences, 25 (18). pp. 83-109. ISSN 2226-9614. (Published)

Francis, Angel and Ramyashree, M. S. and Shanmuga Priya, S. and Kumar, Surendra Harish and Sudhakar, Kumarasamy and Fan, Wei Keen and Tahir, Muhammad (2022) Carbon dioxide hydrogenation to methanol : Process simulation and optimization studies. International Journal of Hydrogen Energy, 47 (86). pp. 36418-36432. ISSN 0360-3199. (Published)

Fukuoka, Yasuhiro and Oshino, Kazuyuki and Ahmad Najmuddin, Ibrahim (2022) Negotiating uneven terrain by a simple teleoperated tracked vehicle with internally movable center of gravity. Applied Sciences (Switzerland), 12 (1). pp. 1-16. ISSN 2076-3417. (Published)

Futane, Abhishek and Narayanamurthy, Vigneswaran and Jadhav, Pramod and Srinivasan, Arthi (2023) Aptamer-based rapid diagnosis for point-of-care application. Microfluidics and Nanofluidics, 27 (15). pp. 1-33. ISSN 1613-4982. (Published)

G

G., Venkateswara Rao and Ramaraju, Ramgopal Varma (2013) Mechanical Postbuckling Behavior of Circular Plates Through Concept of Equivalent Radial Tensile Load. Journal of Structural Engineering, 40 (5). pp. 507-511. (Published)

G. K., Chua and F. H. Y., Tan and F. N., Chew and A. R., Mohd Hairul and M. A. A., Ahmad (2021) Food waste hydrolysate as fermentation medium: Comparison of pre-treatment methods. In: Materials Today: Proceedings, International Conference of Chemical Engineering & Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 131-137., 42 (Part 1). ISSN 2214-7853

G. L., Lew and N., Ibrahim and S., Abdullah and W. R., Wan Daud and W. K. W., Ramli (2021) Exsolution enhancement of metal-support co oxidation perovskite catalyst with parameter modification. In: IOP Conference Series: Earth and Environmental Science, 1st International Conference on Biomass Utilization and Sustainable Energy 2020 , 15-16 December 2020 , Virtual Conference, Universiti Malaysia Perlis (UniMAP). pp. 1-8., 765 (012078). ISSN 1755-1307

Gaanty Pragas, Maniam and Natanamurugaraj, Govindan and Mohd Hasbi, Ab. Rahim and M. M., Yusoff (2019) Towards a sustainable renewable energy. In: 2nd International Conference on Global Initiatives for Sustainable Development: Issues and Strategies , 24-25 June 2019 , Bangkok, Thailand. pp. 1-6.. (Unpublished)

Gaddafi, Musli and Shahrul, Redzuan (2011) Sekatan halang sebar virus. Harian Metro .

Gan, Kiat Yong (2007) The importance of industrial engineering in small & medium industries :a time study in manufacturing industry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Gan, Siew Mei (2015) Azobenzene-liquid crystal composite for fabrication of optical storage devices. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hegde, Gurumurthy).

Gan, Zun Jia (2018) Statistical analysis of factors affecting monoclonal antibody production by using principal component analysis : molecular markers. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Gani, Anisha Banu Dawood and Fernando, Yudi (2018) Concept and Practices of Cyber Supply Chain in Manufacturing Context. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5306-5316. ISBN 9781522522553

Gani, Anisha Banu Dawood and Fernando, Yudi and Lan, Shulin and Lim, Ming K. and Tseng, Ming-Lang (2022) Interplay between cyber supply chain risk management practices and cyber security performance. Industrial Management and Data Systems, Ahead-of-print (Ahead-of-print). pp. 1-19. ISSN 0263-5577. (In Press / Online First) (In Press / Online First)

Gani, Anisha Banu Dawood and Fernando, Yudi and Tseng, Ming-Lang (2021) Interplay between Supply Chain Visibility and Cyber Security Performance. In: 2021 Asia Pacific Industrial Engineering & Management Systems , 2021 APIEMS Online Symposium , Taiwan. pp. 1-19., 1 (1).

Gani, Asri and Erdiwansyah, E. and Desvita, Hera and Munawar, Edi and Rizalman, Mamat and Nizar, Muhammad Afdi and Darnas, Yeggi and Sardjono, Ratnaningsih Eko (2024) Comparative analysis of HHV and LHV values of biocoke fuel from palm oil mill solid waste. Case Studies in Chemical and Environmental Engineering, 9 (100581). pp. 1-7. ISSN 2666-0164. (Published)

Gani, Asri and Erdiwansyah, E. and Munawar, Edi and Mahidin, M. and Rizalman, Mamat and S. M., Rosdi (2023) Investigation of the potential biomass waste source for biocoke production in Indonesia : A review. Energy Reports, 10. pp. 2417-2438. ISSN 2352-4847. (Published)

Gani, Asri and Erdiwansyah, Erdiwansyah and Sardjono, Ratnaningsih Eko and Mariana, Mariana and Rizalman, Mamat (2022) Comparison of remaining coal-burning ash-based on cd, pb, and hg concentration at different temperatures : A case study in aceh province. Journal of Environmental Engineering and Landscape Management, 30 (3). pp. 342-349. ISSN 1648-6897. (Published)

Gayathry, Ganesh and Misnon, Izan Izwan and Rajan, Jose (2023) Solvothermal synthesis of green fluorescent carbon dots from palm kernel shells. In: The 6th International Conference of Chemical Engineering & Industrial Biotechnology (ICCEIB2022) , 15 - 16 August 2022 , Kuantan, Pahang, Malaysia. pp. 1-7.. ISSN 2214-7853 (In Press / Online First)

George, Enelda Christy (2017) Factors influencing first-time house buyers in Tuaran. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ghalambaz, Mohammad G. and Sheremet, Mikhail A. and Muhammad Ashraf, Fauzi and Fteïti, Mehdi A. and Younis, Obai (2023) A scientometrics review of solar thermal energy storage (STES) during the past forty years. Journal of Energy Storage, 66 (107266). pp. 1-20. ISSN 2352-152X. (Published)

Ghassan Maan, Salim and Mohd Anwar, Zawawi (2021) Optical goniometer for knee joint angle continuous monitoring. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Ghawanmeh, Abdullah A. and Tan, Ling Ling and Ali, Gomaa A.M. and Assiri, Mohammed Ali and Chong, Kwok Feng (2024) Optimization of carboxymethyl cellulose-gum Arab-based hydrogel beads for anticancer drugs delivery. Journal of Molecular Liquids, 393 (123631). pp. 1-8. ISSN 0167-7322. (Published)

Ghazali, Alias (2023) Rekod status pemadam api melalui aplikasi. Kosmo . p. 30.

Ghazali, Alias (2023) Sistem notifikasi AI bantu halau gajah. Kosmo . p. 30.

Ghiasi, Pedram and Najafi, Gholamhassan and Ghobadian, Barat and Jafari, Ali and Rizalman, Mamat and Mohd Fairusham, Ghazali (2023) CFD-study of the H-Rotor Darrius wind turbine performance in drag-lift and lift regime : Impact of type, thickness and chord length of blades. Alexandria Engineering Journal, 67. pp. 51-64. ISSN 1110-0168. (Published)

Giacomo, Francesco Di and Azhar, Fakharuddin and Rajan, Jose and Brown, Thomas M. (2016) Progress, Challenges and Perspectives in Flexible Perovskite Solar Cells. Energy and Environmental Science, 9. pp. 3007-3035. ISSN 1754-5692 (Print); 1754-5706 (Online). (Published)

Gimbun, Jolius and Nor Shahirah, Mohd Nasir and Sumaiya, Zainal Abidin and Cheng, Chin Kui and Maizirwan, Mel (2023) Optimisation of bioethanol production from oil palm trunk sap. In: E3S Web of Conferences; 2023 5th International Conference on Resources and Environment Sciences, ICRES 2023 , 9-11 June 2023 , Bangkok. pp. 1-6., 422 (01004). ISSN 2555-0403

Goel, Varun and Dwivedi, Ankur and Kumar, Rajat and Kumar, Reji Rajamony and Pandey, Adarsh Kumar and Chopra, Kapil and Tyagi, Vineet Veer (2023) PCM-assisted energy storage systems for solar-thermal applications: Review of the associated problems and their mitigation strategies. Journal of Energy Storage, 69 (107912). pp. 1-30. ISSN 2352-152X. (Published)

Goh, Chin Guan (2015) Design and implementation of an automatic coin sorting and counting machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Goh, Ghee Hau (2015) PSAT : a pairwise test data generation tool based on simulated annealing algorithm. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Goh, Jee Ren (2018) Stability analysis and improvement evaluation on residual soil slope with reinforcement load : building cracked & slope failure. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Goh, Ming Qian (2021) Adaptive fuzzy proportional-integral-derivative control for micro aerial vehicle. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Owl, Pebrianti).

Goh, Pei Sean and Lau, Woei Jye and Ahmad Fauzi, Ismail and Samawati, Zahra and Liang, Yong Yeow and Kanakaraju, Devagi (2023) Microalgae-enabled wastewater treatment : A sustainable strategy for bioremediation of pesticides. Water (Switzerland), 15 (70). pp. 1-21. ISSN 2073-4441. (Published)

Goh, Pei Sean and Noor Azlinda, Ahmad and Lim, Junwei and Liang, Yong Yeow and Kang, Hooi Siang and Ahmad Fauzi, Ismail and Arthanareeswaran, Gangasalam (2022) Microalgae-enabled wastewater remediation and nutrient recovery through membrane photobioreactors : Recent achievements and future perspective. Membranes, 12 (11). pp. 1-25. ISSN 2077-0375. (Published)

Goi, Y. K. and Liang, Y. Y. and Lau, W. J. and Fimbres Weihs, G. A. (2023) Analysis of the effect of advanced FO spacer on the specific energy consumption of hybrid RO desalination system. Journal of Membrane Science, 668 (121247). ISSN 0376-7388. (Published)

Gopalakrishnan, Siva and Ummu Kulthum, Jamaludin (2017) Investigation on different types of blood glucose control system. Journal of Mechanical Engineering, SI(4) (2). pp. 135-152. ISSN 1823- 5514 (Print); 2550-164X (Online). (Published)

Gopi, Ajith and Sharma, Prabhakar and Sudhakar, Kumarasamy and Ngui, Wai Keng and Kirpichnikova, Irina and Cuce, Erdem (2023) Weather impact on solar farm Performance : A comparative analysis of machine learning techniques. Sustainability (Switzerland), 15 (439). pp. 1-28. ISSN 2071-1050. (Published)

Gopi, Ajith and Sudhakar, K. and Ngui, Wai Keng and Kirpichnikova, I. M. and Cuce, Erdem (2021) Energy analysis of utility-scale PV plant in the rain-dominated tropical monsoon climates. Case Studies in Thermal Engineering, 26 (101123). pp. 1-11. ISSN 2214-157X. (Published)

Gopi, Ajith and Sudhakar, K. and Ngui, Wai Keng and Krishnan, Ananthu R. and Priya, S. Shanmuga (2021) Performance modeling of the weather impact on a utility-scale PV power plant in a tropical region. International Journal of Photoenergy, 2021 (5551014). pp. 1-10. ISSN 1687-529X (Online). (Published)

Gran, Badshah (2016) Watermarking of single and multi frame ultrasound medical images. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gulam Muhammad, Nur and Fernando, Yudi (2021) Paradisrupt 4.0 : Managing supply chain 4.0 disruption systems. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Gupta, Arun and Nuruldiyanah, Kamarudin and Chua, Gek Kee and R. M., Yunus (2012) Extraction of Keratin Protein from Chicken Feather. Journal of Chemistry and Chemical Engineering, 6 (8). pp. 732-737. ISSN 1934-7375 . (Published)

Gupta, Arun and Soubam, Triveni (2021) Novel bio- based adhesive from cross-linked rice starch-natural rubber latex (nrl) for wood based panels bonding. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Gurcharan Singh Bedi, Jasvin Kaur Bedi and Abdul Rahimi, Abdul Rahman and Din, Zia Ud (2021) Heavy machinery operators : Necessary competencies to reduce construction accidents. In: IOP Conference Series: Earth and Environmental Science; International Conference of Sustainable Earth Resources Engineering 2020, SERIES 2020 , 19 June 2020 , Virtual. pp. 1-12., 641 (012007). ISSN 1755-1307

H

H., Badli and Md Noor, Ariffin and Siti Zubaidah, Sulaiman and Susaidevas, Jlyas and Nur Atikah, Mahamad and Nazrah Asyhiqin, Mahamad Khariol Nizar (2019) Assessment on the severity of low density polyethylene (LDPE)/Ethylene hybrid explosion. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (012050). ISSN 1757-8981

H. A., Roslan and M. I., Adiyanto and N. S. H., Harith and Faisal, Ade and S. M.S. A., Razak (2021) Impact of seismic design on cost of structural materials for two storey hostel building in Sabah. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-9., 682 (012024). ISSN 1755-1307

H. M., Mahmudul and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah and Wan Faizal, Wan Ishak and Alenezi, R. (2017) Production, Characterization and Performance of Biodiesel as an Alternative Fuel in Diesel Engines – A Review. Renewable and Sustainable Energy Reviews, 72. pp. 497-509. ISSN 1364-0321. (Published)

H. Sovester, H and M. I., Adiyanto (2017) Seismic Performance Of Reinforced Concrete School Buildings In Sabah. International Journal of Civil Engineering and Geo-Environmental, Sp. (NCWE). pp. 148-152. ISSN 2180-2742. (Published)

Habib, M. A. a and Raja-Yusof, R. -J. and Salim, S. S.a and Sani, A. A. a and Sofian, H. and Abu Bakar, A. (2021) Analyzing students’ experience in programming with computational thinking through competitive, physical, and tactile games: The quadrilateral method approach. Turkish Journal of Electrical Engineering and Computer Sciences, 25 (9). pp. 2280-2297. ISSN 1300-0632. (Published)

Habsah, Yusof (1997) Rekabentuk pembesar suara talian penghantaran (transmission-line/labyrinth). Fakulti Pendidikan, Universiti Teknologi Malaysia.

Hadi, A. E. and Tezara, C. and Fitriyana, D. F. and Siregar, J. P. and Oumer, A. N. and Hamdan, M. H. M. and Jaafar, J. and Zalinawati, M. and Irawan, A. P. (2021) Effect of water absorption behaviour on tensile properties of hybrid jute-roselle woven fibre reinforced polyester composites. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9170-9178. ISSN 2180-1606. (Published)

Hadi, Agung Efriyo and Siregar, Januar Parlaungan and Cionita, Tezara and Norlaila, Mohd Bakeri and Muhammad Amin, Mohd Badari and Irawan, Agustinus Purna and Jamiluddin, Jaafar and Rihayat, Teuku and Ramli, Junid and Fitriyana, Deni Fajar (2022) Potentiality of utilizing woven pineapple leaf fibre for polymer composites. Polymers, 14 (13). pp. 1-11. ISSN 2073-4360. (Published)

Hadi, Manap (2016) Design and Analysis of A Double Guided Roller for a Jigsaw. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7221-7224. ISSN 1819-6608. (Published)

Hadi, Manap and M. S., Najib (2014) A DOAS System For Monitoring Of Ammonia Emission In The Agricultural Sector. Sensors and Actuators B: Chemical, 205. pp. 411-415. ISSN 0925-4005. (Published)

Hadi, Manap and Zul, Rasyied and M. S., Najib (2015) Optimization Methods for Optical Ammonia Sensor. In: International Conference on Sensors Engineering and Electronics Instrumental Advances (SEIA' 2015) , 21-22 Nov 2015 , Dubai. . (Unpublished)

Hadijah, Ahmad (2020) Ayuh panjangkan langkahmu. Harian Metro .

Hadijah, Ahmad (2022) Pemantapan Kursus Integriti dan Anti Rasuah melalui pembelajaran berasaskan pengalaman: dengan kaedah pembelajaran Sesi Moot Court. UMP News .

Hafizatulazlin, Abdul Aziz (2023) Associate Professor Dr. Hazrulrizawati produces bone treatment products through deer antlers. UMP News .

Hafizatulazlin, Abdul Aziz (2023) Associate Professor Dr. Ramadhansyah Putra Jaya produces porous concrete ready within 24 hours. UMP News .

Hafizatulazlin, Abdul Aziz (2022) Profesor Madya Dr. Hazrulrizawati hasilkan produk rawatan tulang melalui tanduk rusa. UMP News .

Hafizatulazlin, Abdul Aziz (2023) UMPSA lecturer invents I-GCPM Modular to help students deepen project management and professional certification exams. UMPSA News .

Hafizatulazlin, Abdul Aziz and Nur Hartini, Mohd Hatta (2021) DEMAEX SIM Simulator inovasi terbaharu Dr. Lee Chia Kuang. UMP News .

Hafizatulazlin, Abdul Aziz and Nur Hartini, Mohd Hatta (2021) DEMAEX-SIM Simulator latest innovation by Dr. Lee Chia Kuang. UMP News .

Hafizatulazlin, Abdul Aziz and Nur Hartini, Mohd Hatta (2022) Profesor Madya Dr. Ramadhansyah Putra Jaya hasilkan konkrit berliang yang boleh digunakan dalam masa 24 jam. UMP News .

Hafizatulazlin, Abdul Aziz and Nur Hartini, Mohd Hatta (2021) Ts. Dr. Lee Khai Loon cipta sistem pengurusan chalet berasaskan reka bentuk khas untuk industri perhotelan. UMP News .

Hafizatulazlin, Abdul Aziz and Nur Hartini, Mohd Hatta (2021) Ts. Dr. Norazlianie berjaya hasilkan gas hidrogen berketulenan tinggi untuk industri tenaga. UMP News .

Hafizatulazlin, Abdul Aziz and Nur Hartini, Mohd Hatta (2021) Ts. Dr. Waheb cipta Sistem amaran dan pengawasan banjir berbantu internet benda jalur sempit. UMP News .

Hafizatulazlin, Abdul Aziz and Nur Hartini, Mohd Hatta (2021) Ts. Dr. Waheb creates Narrowband Internet of Things Enabled Flood Monitoring and Warning System. UMP News .

Hafizatulazlin, Abdul Aziz and Nurhartini, Mohd Hatta (2021) Ts. Dr. Lee Khai Loon creates specially designed chalet management system for hotel industry. UMP News .

Hafizatulazlin, Abdul Aziz and Nurhartini, Mohd Hatta (2021) Ts. Dr. Norazlianie produces high-purity hydrogen gas for power industry. UMP News .

Hafizoah, Kassim (2017) Scientific Writing (Technology). Penerbit UMP, Kuantan, Pahang. ISBN 978-967-2054-08-5

Hafizoah, Kassim and Nor Yazi, Khamis and Azwin Arif, Abdul Rahim and Fatimah, Ali and Mohammad Musab, Azmat Ali (2024) 3 daerah di Pahang terima jaringan perkongsian TechTools for Educators. UMPSA News .

Hajar, Mohammed A. and Alkahtani, Ammar Ahmed and Daing Nasir, Ibrahim and Al-Sharafi, Mohammed A. and Alkawsi, Gamal and Noorminshah, A. Iahad and Mohd Ridzuan, Darun and Tiong, Sieh Kiong (2022) The effect of value innovation in the superior performance and sustainable growth of telecommunications sector : Mediation effect of customer satisfaction and loyalty. Sustainability (Switzerland), 14 (10). pp. 1-20. ISSN 2071-1050. (Published)

Hajar Fauzan, Ahmad (2021) Varian Delta akan terhapus sekiranya rantaian jangkitan dibendung. UMP News .

Halili, Munira and Fernando, Yudi (2022) Challenges of social sustainability: Supply chain management perspective. International Journal of Management Concepts and Philosophy, 1 (1). pp. 1-12. ISSN 1741-8135. (In Press / Online First) (In Press / Online First)

Halim, Ahmad Zamani Abdul (2019) Synthesis and characterization novel magnetic nanoparticle (MNPS) metal based catalyst for carbon dioxide treatment in flue gases power plant. , [Research Report: Research Report] (Unpublished)

Halizan, Mohmood (2021) Blockchain technology potential in halal industry. UMP News .

Halizan, Mohmood (2021) Manfaat teknologi Blockchain semasa pandemik Covid 19. UMP News .

Halizan, Mohmood (2023) Pasukan pelajar UMP bertanding di NMEPC 2022. UMP News .

Halizan, Mohmood (2021) Potensi Teknologi Blockchain dalam industri halal. UMP News .

Halizan, Mohmood (2021) Professional Talk discusses lifelines for contractors. UMP News .

Halizan, Mohmood (2019) STEM@UMP inisiatif transformasi generasi abad ke-21. UMP News . (Unpublished)

Halizan, Mohmood (2023) UMP Student Team Competes at NMEPC 2022. UMP News .

Halizan, Mohmood (2022) UMP and Aspen Technology will expand collaboration in technology field. UMP News .

Halizan, Mohmood (2022) UMP dan Aspen Technology bakal perluas kerjasama dalam bidang teknologi. UMP News .

Halizan, Mohmood (2021) Utilise blockchain technology during COVID 19 pandemic. UMP News .

Hamada, Hussein M. and Jokhio, Gul Ahmed and Fadzil, Mat Yahaya and Humada, Ali Mahmood (2018) Applications of nano palm oil fuel ash and nano fly ash in concrete. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018 , 1-2 March 2018 , Universiti Malaysia Pahang. pp. 1-7., 342 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Hamada, Hussein Mahmood and Abed, Farid and Alattar, Alyaa and Fadzil, Mat Yahaya and Tayeh, Bassam A. and Aisheh, Yazan I.Abu (2023) Influence of palm oil fuel ash on the high strength and ultra-high performance concrete : A comprehensive review. Engineering Science and Technology, an International Journal, 45 (101492). pp. 1-10. ISSN 2215-0986. (Published)

Hamada, Hussein Mahmood and Al-Attar, Alyaa A. and Tayeh, Bassam and Fadzil, Mat Yahaya (2022) Optimizing the concrete strength of lightweight concrete containing nano palm oil fuel ash and palm oil clinker using response surface method. Case Studies in Construction Materials, 16 (e01061). pp. 1-22. ISSN 2214-5095. (Published)

Hamada, Hussein Mahmood and Alattar, Alyaa and Tayeh, Bassam and Fadzil, Yahaya and Adesina, Adeyemi (2022) Sustainable application of coal bottom ash as fine aggregates in concrete: A comprehensive review. Case Studies in Construction Materials, 16 (e01109). pp. 1-17. ISSN 2214-5095. (Published)

Hamada, Hussein Mahmood and Alattar, Alyaa and Tayeh, Bassam A. and Fadzil, Mat Yahaya and Almeshal, Ibrahim (2022) Influence of different curing methods on the compressive strength of ultra-high-performance concrete : A comprehensive review. Case Studies in Construction Materials, 17 (e01390). pp. 1-16. ISSN 2214-5095. (Published)

Hamada, Hussein Mahmood and Alattar, Alyaa and Tayeh, Bassam A. and Fadzil, Mat Yahaya and Skariah Thomas, Blessen (2022) Effect of recycled waste glass on the properties of high-performance concrete : A critical review. Case Studies in Construction Materials, 17 (e01149). pp. 1-18. ISSN 2214-5095. (Published)

Hamid Nour, Abdurahman and Akbari, Sweeta and Rosli, Mohd Yunus and Mona, Timan (2021) Potential of fenugreek seed extract for health, the environment and the economy. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Hamid Nour, Abdurahman and Rosli, Mohd Yunus and Hamid Nour, Azhary and Mona, Timan and Mohd Arman, Abdul Kadir (2021) Highly efficient and low cost UMP surfactant for crude oil transportation. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Hamidah, Abdullah and Khan, Md. Maksudur Rahman and Zahira, Yaakob and Nur Aminatulmimi, Ismail (2019) A kinetic model for the photocatalytic reduction of CO2 to methanol pathways. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012026). ISSN 1757-8981

Hamirahanim, Abdul Rahman (2021) Guna kekuatan tingkat kecekapan, bijak urus inovasi. Berita Harian .

Hamisa, A. H. and Azmi, W. H. and Mohd Yusof, Taib and Sharif, M. Z. and Dahlan, A. A. (2021) Development of automotive air-conditioning system test rig for hybrid electric vehicles. In: Journal of Physics: Conference Series; 2020 International Conference on Innovative Technology and Sciences, ICITSS 2020 , 12 - 13 November 2020 , Kuantan, Virtual. pp. 1-11., 2000 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Hamisa, Abdul Hamid and Wan Hamzah, Wan Azmi and Mohd Farid, Ismail and Rosminazuin, Ab Rahim and Ali, Hafiz Muhammad (2023) Tribology performance of polyol-ester based TiO2, SiO2 and their hybrid nanolubricants. Lubricants, 11 (18). pp. 1-20. ISSN 2075-4442 (Online). (Published)

Hammood, Rasheed Abed and Sharifah Maszura, Syed Mohsin (2018) Study on the Performance of Kenaf Fiber to Strengthening of Reinforced Concrete Beams: Review Paper. AASCIT Journal of Environment, 3 (2). pp. 29-32. ISSN 2381-1331 (Print); 2381-134X (Online). (Published)

Hamood Ahmed, Suliman Abdulmalek and Abdul Nasir, Abd Ghafar and Mohd Amir Shahlan, Mohd Aspar and Mukarram Abduljalil Mahmood, Al-Muhaya (2022) Machine learning based data monitoring system for chicken poultry. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 136..

Hamza, Nidal Abdelgadir Ahmed and Mazlina, Abdul Majid and Al-Bashiri, Hael (2019) Reducing the throughput time for patient flow in emergency department: simulation and modelling overview. In: IOP Conference Series: Materials Science and Engineering, The 6th International Conference on Software Engineering & Computer Systems , 25-27 September 2019 , Pahang, Malaysia. pp. 1-8., 769 (012013). ISSN 1757-8981 (Print), 1757-899X (Online)

Hamzah, Ahmad (2021) Transformasi Digital dalam PdP beri manfaat buat masyarakat. UMP News .

Hamzah, Ahmad and Lim Zhi, Xian and Nur Aqilah, Othman and Mohd Syakirin, Ramli and Mohd Mawardi, Saari (2021) An analysis of state covariance of mobile robot navigation in unstructured environment based on ROS. In: Proceedings of the 11th National Technical Seminar on Unmanned System Technology 2019 (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang, Kuantan, Pahang, Malaysia. pp. 259-270., 666. ISBN 1876-1100

Hamzah, Ahmad and Mohd Syakirin, Ramli and Nur Aqilah, Othman and Badaruddin, Mohamad and Mohd Mawardi, Saari (2022) Intermittent measurement and finite escape time correlations study in H∞ filter in navigation. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 601-611., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4

Han, Fengrong and Izzeldin, Ibrahim Mohamed Abdelaziz and Kamarul Hawari, Ghazali and Zhao, Yue and Li, Ning and UNSPECIFIED (2023) Optimized range-free localization scheme using autonomous groups particles swarm optimization for anisotropic wireless sensor networks. IEEE Access, 11. pp. 26906-26920. ISSN 2169-3536. (Published)

Han, Fengrong and Izzeldin Ibrahim, Mohamed Abdelaziz and Liu, Xinni and Kamarul Hawari, Ghazali (2020) An enhanced distance vector-hop algorithm using new weighted location method for wireless sensor networks. International Journal of Advanced Computer Science and Applications (IJACSA), 11 (5). pp. 486-495. ISSN 2156-5570(Online). (Published)

Hanafi, M. Yusop and Ghazali, M. F. and Yusof, M. F.M. and Pi Remli, Muhammad Aminuddin and Mohd Sabri, Ahmad Azri Syazwan (2022) Leakage identification based on hydraulic transient analysis. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 37..

Hanida, Abdul Aziz and Mohamad Rizza, Othman and Azmi, Mohd Shariff and Tan, Lian See (2017) Application of Analytical Hierarchy Process (AHP) in Prioritizing HAZOP Analysis for Pilot Plant. Chemical Engineering Research Bulletin, 19 (Special). pp. 87-95. ISSN 0379-7678 (Print); 2072-9510 (Online). (Published)

Hanida, Abdul Aziz and Sukadarin, Ezrin Hani and Abdullah, Syamsul B. and Othman, Mohamad R. and Nur Izzati, Pakhor Anuar and Pang, Kar Kei (2019) Investigation of Management of Change (MOC) requirements for framework intervention compliance with Process Safety Management standard. , [Research Report: Research Report] (Unpublished)

Hanin Hazwani, Mohammad and Siti Zanariah, Satari and Wan Nur Syahidah, Wan Yusoff (2021) Review on circular-linear regression models. In: Journal of Physics: Conference Series, Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 28-29 July 2021 , Kuantan, Pahang. pp. 1-12., 1988. ISSN 1742-6588

Hanis Nadiah, Ruslan (2022) Properties of mortar with natural cockle shell waste as partial sand replacement. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Khairunisa, Muthusamy).

Hanis Nadiah, Ruslan and Khairunisa, Muthusamy and Hoe, Yip Kam and N., Mohamad and Nur Farah Aziera, Jamaludin (2022) Study of workability and compressive strength of eggshell concrete. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 92..

Har, Lai Yee (2016) Crystal growth of ZnO bar using joule heating. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Influence of Second Reflow on the Intermetallic Compound Growth with Different Surface Finish. Key Engineering Materials, 701. pp. 127-131. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Hariram, Nediyirippil Prakasan and Mekha, K. B. and Suganthan, Vipinraj and Sudhakar, Kumarasamy (2023) Sustainalism: An integrated socio-economic-environmental model to address sustainable development and sustainability. Sustainability (Switzerland), 15 (10682). pp. 1-37. ISSN 2071-1050. (Published)

Haris Faisal, Shaharuddin and Zainah, Md. Zain (2021) IOT Based unmanned surface vehicle for water sampling and water quality application. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Harraz Irfan, Nazaruddin and Mohd Razali, Daud (2021) Current collector-free independent battery railway vehicle. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Hasan, M. M. and Rahman, Md Mustafizur and Rasul, M. G. (2021) The thermal and auto-ignition performance of a homogeneous charge compression ignition engine fuelled with diethyl ether and ethanol blends. Applied Thermal Engineering, 190 (116828). pp. 1-11. ISSN 1359-4311. (Published)

Hasan, Md. Munirul and Rahman, Md. Arafatur and Sedigh, Arya and Khasanah, Ana U. and Asyhari, A. Taufiq and Tao, Hai and Suraya, Abu Bakar (2021) Search and rescue operation in flooded areas: A survey on emerging sensor networking-enabled IoT-oriented technologies and applications. Cognitive Systems Research, 67. pp. 104-123. ISSN 1389-0417. (Published)

Hasan, Md. Yeasir and Monir, Minhaj Uddin and Ahmed, Mohammad Tofayal and Abd Aziz, Azrina and Shovon, Shaik Muntasir and Akash, Faysal Ahamed and Hossain Khan, Mohammad Forrukh and Faruque, Md. Jamal and Rifat, Md. Shamiul Islam and Hossain, Md. Jafar and Kundu, Prionti and Akter, Rafica and Ali, Sohag (2022) Sustainable energy sources in Bangladesh: A review on present and future prospect. Renewable and Sustainable Energy Reviews, 155 (111870). pp. 1-20. ISSN 1364-0321. (Published)

Hasan, Raed Abdulkareem and Mohammed, Muamer N. (2017) A krill herd behaviour inspired load balancing of tasks in cloud computing. Studies in Informatics and Control, 26 (24). pp. 413-424. ISSN 220-1766. (Published)

Hasan, Raed Abdulkareem and Mostafa, A. Mohammed and Salih, Zeyad Hussein and M. A., Ameedeen and Tapus, Nicolae and Mohammed, Muamer N. (2018) HSO: A hybrid swarm optimization algorithm for reducing energy consumption in the cloudlets. Telkomnika, 16 (5). pp. 2144-2154. ISSN 1693-6930. (Published)

Hasanuddin, Iskandar and Mawardi, Indra and Nurdin, N. and Putra Jaya, Ramadhansyah (2023) Evaluation of properties of hybrid laminated composites with different fiber layers based on Coir/Al2O3 reinforced composites for structural application. Results in Engineering, 17 (100948). pp. 1-8. ISSN 2590-1230. (Published)

Hasliza, Abu Hassan and Marzuqi, Yaakob and Sasni, Ismail and Juwairiyyah, Abd Rahman and Izyani, Mat Rusni and Azlee, Zabidi and Ihsan, Mohd Yassin and Nooritawati, Md Tahir and Suraiya, Mohamad Shafie (2020) Detection of proliferative diabetic retinopathy in fundus images using convolution neural network. In: IOP Conference Series: Materials Science and Engineering; 6th International Conference on Software Engineering and Computer Systems, ICSECS 2019 , 25-27 September 2019 , Kuantan, Pahang. pp. 1-16., 769 (012029). ISSN 1757-8981

Hasmawani, Hashim and Muhammad Khairul Anuar, Mohamed and Abid, Hussanan and Nazila, Ishak and Norhafizah, Md Sarif and Mohd Zuki, Salleh (2015) The Effects of Slip Conditions and Viscous Dissipation on the Stagnation Point Flow over a Stretching Sheet. In: The 2nd Innovation and Analytics Conference & Exhibition (IACE 2015) , 29 Sept - 1 Okt 2015 , Alor Setar, Kedah, Malaysia. pp. 1-9.. (Unpublished)

Hasnah, Hussiin (2020) Manfaatkan pengunaan teknologi dalam masa PKP. UMP News .

Hasnah, Hussiin (2024) Mendidik Etika dan Adab Mahasiswa di Era ChatGPT. UMPSA News .

Hasnah, Hussiin (2022) Rumusan permasalahan dan cabaran pelajar UMP dalam menjalani pembelajaran secara dalam talian. UMP News .

Hasnah, Junid (2022) Empat universiti Malaysia meterai surat hasrat kerjasama TVET di China. Bernama .

Hassan, M. H. A. and Othman, N. A. (2021) Flipped classroom approach in rigid body dynamics: A case study of five-semester observation. International Journal of Engineering Pedagogy, 11 (1). pp. 87-94. ISSN 2192-4880. (Published)

Hassan, Mohamed and Singh, Manwinder and Hamid, Khalid and Elmutasim, Imadeldin Elsayed (2023) Enhancement of outage probability for down link cooperative non-orthogonal multiple access in fifth-generation network. International Journal of Electrical and Computer Engineering, 13 (4). pp. 4119-4126. ISSN 2088-8708. (Published)

Hassan, Nazia and Mirza, Mohd Aamir and Aslam, Mohammed and Mahmood, Syed and Iqbal, Zeenat (2020) Doe guided chitosan based nano-ophthalmic preparation against fungal keratitis. In: Materials Today: Proceedings, 11th Malaysian Technical Universities Conference on Engineering & Technology , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 19-29., 41 (Part 1). ISSN 2214-7853

Hassan Rahnaward, Ghulami and Mohd Rashid, Ab Hamid and Mohd Reza, Ibrahim and Ali, Hikmat and Hussein, Aziz (2018) Relationship between Internet addictions and academic performance among Afghan universities students. International Journal of Innovative Research and Scientific Studies, 1 (4). pp. 49-56. ISSN 2617-6548. (Published)

Hassanal, Haris (2019) Fabrication & characterization of biomaterials from hydroxylethyl cellulose sponges coated with hydroxy apatite. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hazami, Che Hussain and Mohd Adib, Mohd Amin and Syahrulnaim, Mohamad Nawi and Nik Mohd Zaitul Akmal, Mustapha and Saifudin, Razali (2023) Development of Smart Autonomous Lawn Mower SALAM. UMP News .

Hazim, Khir and Pandey, Adarsh Kumar and Saidur, Rahman Md and Muhammad Shakeel, Ahmad and Samykano, Mahendran and Nasrudin, Abd Rahim (2024) Bismuth as efficient sintering aid for TiO2-based low temperature dye sensitized solar cell. Materials Science in Semiconductor Processing, 169 (107918). pp. 1-9. ISSN 1369-8001. (Published)

Hazim, Yusof and Islam, Md Nahidul and Mohd Shawal, Jadin and Mahfuzah, Mustafa and Norizam, Sulaiman (2022) EEG mechanism interaction to evaluate vehicle’s driver microsleep. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 120..

Hazimah, Abdul Rahim (2015) Modelling and simulation of flexible production line for coil winding assembly. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Mohd Syafiq, Sharip and Ahmad Shahir, Jamaludin and Wan Norharyati, Wan Salleh and Farhana, Aziz (2019) A brief review on utilization of hybrid nanofluid in heat exchangers: Theoretical and experimental. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 416-422.. ISBN 978-981-15-0950-6

Hazirah, Roslan (2018) Design and development of electrical system on hydrokinetic turbines for home power. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Hazlina, Faizal (2016) UMP jalin kerjasama dengan Neopeutics dalam bidang bioteknologi. UMP News . (Unpublished)

Hazlina, Faizal (2022) UMP julung kali tersenarai dalam penarafan dunia THE WUR 2023. UMP News .

Hazlina, Faizal (2024) UMPSA receives the 2023 Low Carbon City Award. UMPSA News .

Hazlina, Faizal (2013) The new Deputy Vice Chancellor (Research and Innovation). Quest, 10 (6). p. 1. ISSN 1985-8159

Hazri Dahalan, Md Razip (2021) Determining the voltage sag immunity of ac contactor with field testing in petrochemical plant. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Abu Zaharin).

Hazri Dahalan, Razip and Abu Zaharin, Ahmad (2020) Voltage Sag immunity testing for AC contactors in industrial environment. In: Proceedings of the 5th International Conference on Electrical, Control & Computer Engineering, Kuantan, Pahang, Malaysia, 29th July 2019. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 1-11. ISBN 978-981-15-2316-8 (Print); 978-981-15-2317-5 (Online)

Hazrulrizawati, Abd Hamid (2014) Isolation and characterization of apoptosis-inducing compounds from Clinacanthus nutans. (Unpublished)

Hazrulrizawati, Abd Hamid and Farah Hanani, Zulkifli and Muhamad Zubbair Ammar, Khairul Anuar (2021) DeerA-OS Bone Void Filler. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Hazrulrizawati, Abd Hamid and Mashitah, Mohd Yusoff (2016) Development of chemical markers and chromatographic fingerprint of Clinachantus nutans for evaluation of therapeutic products. , [Research Book Profile: Research Report] (Unpublished)

Hazrulrizawati, Abd Hamid and Mohd Hairul, Ab. Rahim and Aizi Nor Mazila, Ramli and Mashitah, Mohd Yusoff and Ahmad Faizal, Abdull Razis (2017) Isolation and characterization of alkaloids from Passiflora feotida for potential of antidepressant compounds. , [Research Book Profile: Research Report] (Unpublished)

Hazrulrizawati, Abd Hamid and Nishantini, Silvarajoo and Nurulhusna, Ab. Hamid (2020) Chemical composition and repellent activity against mosquito aedes aegypti of pelargonium radula, syzygium aromaticum and citrus aurantifolia essential oils. In: Symposium on Industrial Science and Technology, SISTEC 2019 , 22-23 Aug. 2019 , Kuantan, Malaysia. pp. 253-257., 981. ISSN 1662-9752

Hazrulrizawati, Hamid and Muhamad Zubbair Ammar, Khairul Anuar and Farah Hanani, Zulkifli (2021) Preparation and characterization of deer velvet antler/polyvinyl alcohol (DVA/PVA) scaffold for bone tissue engineering. In: Materials Today: Proceedings, 3rd Symposium on Industrial Science and Technology (SISTEC2021) , 25-26 August 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1332-1337., 51 (Part 2). ISSN 2214-7853

Hazwani Hawa, Mohammad Sobani (2019) Treatment of palm oil mill effluent using struvite preciptation method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hegde, Gurumurthy and Garudacharia, B. and Satyanarayana, M. N. and Thippeswamy, B. and Shivakumar, C.K. and Shivananda, K.N. and Isloor, Arun M. (2012) Synthesis, Characterization and Antimicrobial Studies of Some New Quinoline Incorporated Benzimidazole Derivatives. European Journal of Medicinal Chemistry, 54. pp. 900-906. ISSN 0223-5234 (print); 1768-3254 (online). (Published)

Heja Ibrahim, Adil and Mohammad R., Thalji and Suhad A., Yasin and Ibtisam A., Saeed and Mohammed A., Assiri and Chong, Kwok Feng and Gomaa A. M., Ali (2022) Metal-organic frameworks (MOFs) based nanofiber architectures for the removal of heavy metal ions. RSC Advances, 12 (3). pp. 1433-1450. ISSN 2046-2069. (Published)

Helmi, Mohamed Isa (2022) MTUN buka peluang pengajian tinggi untuk bidang TVET. UMP News .

Helmi, Mohamed Isa (2012) Technology Transfer Office. Quest, 8 (5). p. 16. ISSN 1985-8159

Hendayani, Ratih and Fernando, Yudi (2018) Missing Part of Halal Supply Chain Management. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5456-5464. ISBN 9781522522553

Heng, Cheng Wee (2014) Group kinect game system dodge for alive. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Heng, Sheng Guang and Rosdiyana, Samad and Mahfuzah, Mustafa and Nor Rul Hasma, Abdullah and Pebrianti, Dwi (2019) Analysis of performance between kinetic v1 and Kinect v2 for various facial part movements. In: 2019 IEEE 9th International Conference on System Engineering and Technology, ICSET 2019 - Proceeding , 7 October 2019 , Shah Alam. pp. 17-22. (8906419). ISBN 978-172810758-5

Herawan, Tutut (2010) Detecting Critical Least Association Rules In Medical Databases. International Journal of Modern Physics: Conference Series, 1 (1). pp. 1-5. ISSN 2010-1945. (Published)

Herawan, Tutut (2010) Rough Clustering For Cancer Datasets. International Journal of Modern Physics: Conference Series, 1 (1). pp. 1-5. ISSN 2010-1945. (Published)

Heshalini, Rajagopal and Norrima, Mokhtar and Anis Salwa, Mohd Khairuddin and Wan Khairunizam, Wan Ahmad and Zuwairie, Ibrahim and Asrul, Adam and Wan Amirul, Wan Mohd Mahiyidin (2021) A no-reference image quality assessment metric for wood images. Journal of Robotics, Networking and Artificial Life, 8 (2). pp. 127-133. ISSN 2405-9021. (Published)

Hezelin Elayana, Shaian (2022) Chemical composition of treated agarwood (Aquilaria malaccensis) essential oil. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Saiful Nizam, Tajuddin).

Hian, Heng Chun and Mohd Najib, Yacob (2022) Emergency response and preparedness assessment among migrant construction workers. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 220..

Hidayat, Untung and Hendrawati, Tri Yuni and Budiyanto, Budiyanto and Ramadhan, Anwar Ilmar and Wan Hamzah, Azmi (2022) Drying and pectin extraction from waste lemon peel (citrus limon) using extraction process with ultrasonic waves. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 225..

Hidayatul Nur, Hasim and Ramalingam, Mritha and Ernawan, Ferda and R., Puviarasi (2017) Developing fish feeder system using Raspberry Pi. In: IEEE Third International Conference on Advances in Electrical, Electronics, Information, Communication and Bio-Informatics (AEEICB 2017) , 27-28 February 2017 , Chennai, India. pp. 1-5.. ISBN 978-1-5090-5434-3

Hidir, Reduan (2017) UMP award shows R&D focus success. New Straits Times . p. 13.

Hiew, Kuet Shang (2019) An IoT based baby monitoring system. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Hiew, Poh Ling (2014) Interactive of quick response (QR) technology in learning session. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Hilmi, Kamaludin (2017) Investigating the use of potassium-rich pellet on the feed conversion ratio, water quality analysis and fruit development of lycopersicon sp. growing in aquaponics system. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Hindryawati, Noor and Daniel, and Erwin, and Gaanty Pragas, Maniam (2017) Preparation of spent bleaching earth-supported calcium from limestone as catalyst in transesterification of waste frying oil. Jurnal Bahan Alam Terbarukan, 6 (1). pp. 68-75. ISSN 2303-0623. (Published)

Hong, Cheow Shek and Ahmad Shahrizan, Abdul Ghani and Ismail, Mohd Khairuddin (2018) Development of an Electronic Kit for detecting asthma in Human Respiratory System. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-8., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Hoo, Yee Hui and Fernando, Yudi (2018) Improving Competencies for the Courier Service Industry in Malaysia. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 2802-2809. ISBN 9781522522553

Hoque, Md. Ikramul and Abdo Qasem, Mohammed Hasan and Parvez, Md. Shohan (2022) Municipal solid waste management in Khulna City Corporation Bangladesh. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 78..

Hossain, Md Junayed and Abdullah, Sheikh Md and Barkatullah, Mohammad and Miahh, Md Saef Ulla and Sarwar, Talha and Monir, Md Fahad (2022) Predicting the success of suicide terrorist attacks using different machine learning algorithms. In: Proceedings of 2022 25th International Conference on Computer and Information Technology, ICCIT 2022 , 17-19 December 2022 , Cox's Bazar. pp. 1-6. (187046). ISBN 979-835034602-2

Hossain, Md Shamim and Jalab, Hamid A. and Kahtan, Hasan and Azma, Abdullah (2019) Image resolution enhancement using improved edge directed interpolation algorithm. In: Proceedings - 9th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2019 , 29 November-1 December 2019 , Penang. pp. 55-60. (9068535). ISSN 978-172813500-7

Hossain, Md. Sanower and Hidayah, Karuniawati and Jairoun, Ammar Abdulrahman and Urbi, Zannat and Ooi, Der Jiun and John, Akbar and Lim, Ya Chee and K. M., Kaderi Kibria and A. K. M., Mohiuddin and Ming, Long Chiau and Goh, Khang Wen and Hadi, Muhammad Abdul (2022) Colorectal cancer: A review of carcinogenesis, global epidemiology, current challenges, risk factors, preventive and treatment strategies. Cancers, 14 (7). pp. 1-25. ISSN 2072-6694. (Published)

Hossain, Mohammed Tahmid and Hossain, Afra and Meem, Sabrina Masum and Monir, Md Fahad and Miah, Md Saef Ullah and Talha, Sarwar (2023) Impact of COVID-19 Lockdowns on air quality in Bangladesh : Analysis and AQI forecasting with support vector regression. In: 2023 4th International Conference for Emerging Technology, INCET 2023 , 26-28 May 2023 , Belgaum. pp. 1-6.. ISBN 979-835033575-0

Hossen, Md Arif and Azrina, Abd Aziz and Ikreedeegh, Riyadh Ramadhan and Aamina, Din Muhammad and Nurashikin, Yaacof and Kah, Hon Leong and Wu, Lihua (2024) Optimization of anodizing parameters for the morphological properties of TiO2 nanotubes based on response surface methodology. Next Materials, 2 (100061). pp. 1-10. ISSN 2949-8228. (Published)

Hossen, Md Rifat and Alfaz, Nazia and Sami, Adnan and Tanim, Sharia Arfin and Talha, Sarwar and Islam, Md Kamrul (2023) An efficientnet to classify monkeypox-comparable skin lesions using transfer learning. In: 2023 IEEE International Conference on Omni-Layer Intelligent Systems, COINS 2023 , 23-25 July 2023 , Berlin. pp. 1-6.. ISBN 979-835034647-3

Hou, Wentao and Ding, Yuquan and Huang, Guoqaing Qiang and Huda, Nazmul and Luqman Hakim, Ahmad Shah and Piao, Zhongyu and Shen, Yifu and Shen, Zhikang and Gerlich, Adrian P. (2022) The role of pin eccentricity in friction stir welding of Al‑Mg‑Si alloy sheets : microstructural evolution and mechanical properties. International Journal of Advanced Manufacturing Technology, 121 (11-12). pp. 7661-7675. ISSN 0268-3768. (Published)

Hu, Haichao and Wei, Qiang and Liu, Boya and Liu, Yun and Hu, Ning and Quanjin, Ma and Wang, Chuancai (2022) Progressive damage behaviour analysis and comparison with 2D/3D hashin failure models on carbon fibre–reinforced aluminium laminates. Polymers, 14 (2946). pp. 1-25. ISSN 2073-4360. (Published)

Huawei Mobile, Service (2023) HUAWEI AppGallery and Universiti Malaysia Pahang Al-Sultan Abdullah (UMPSA) collaborate host MLBB ROCT 2023 to promote the growth of E-sports in Malaysia. PR News wire .

Huei, Ruey Ong and Khan, Maksudur R. and Yousuf, Abu and Nor Amalina, Hussain and Cheng, C. K. (2015) Synthesis and Characterization of a CaFe2O4 Catalyst for Oleic Acid Esterification. RSC Advances, 121 (5). pp. 100362-100368. ISSN 2046-2069. (Published)

Hung, William Chin Wei and Muhammad Aizzat, Zakaria and Muhammad Izhar, Ishak and Mohamad Heerwan, Peeie (2022) Object tracking for autonomous vehicle using YOLO V3. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang, Kuantan. pp. 265-273., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Husin, Husni and Mahidin, Mahidin and Marwan, Marwan and Nasution, Fahrizal and Erdiwansyah, Erdiwansyah and Ahmadi, Ahmadi and Muchtar, Syawaliah and Yani, Firda Tirta and Rizalman, Mamat (2023) Conversion of polypropylene-derived crude pyrolytic oils using hydrothermal autoclave reactor and Ni/aceh natural zeolite as catalysts. Heliyon, 9 (e14880). pp. 1-10. ISSN 2405-8440. (Published)

Hussein M., Hamada and Alyaa A., Al-Attar and Bassam, Tayeh and Fadzil, Mat Yahaya and Yazan I., Abu Aisheh (2023) Optimising concrete containing palm oil clinker and palm oil fuel ash using response surface method. Ain Shams Engineering Journal, 14 (102150). pp. 1-14. ISSN 2090-4479. (Published)

Hussin, N.F.R. and Rosli, N. (2022) Study of underfill flow in microchip packaging using ansys. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 76-82. ISSN 2636-9575. (Published)

I

I. A., Kamaruddin and Mohd Azri Hizami, Rasid and Nurul Fatimah, Abdullah and Abbas, Abdul Wahab (2022) Evaluation of a DC Motor temperature response characterization method under different sampling interval. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 345-360., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

I. I., Azmi and S. N. A. M., Zaini and Mohd Yazid, Abu (2019) Application of Mahalanobis-Taguchi system in palm oil plantation. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 1-8. ISSN 2636-9575. (Published)

Ibrahim, Elganidi and Basem, Elarbe and Norida, Ridzuan and Norhayati, Abdullah (2022) Synthesis, characterisation and pre-evaluation of a novel terpolymer as pour point depressants to improve the Malaysian crude oil flowability. Journal of Petroleum Exploration and Production Technology, 12 (7). 2067 -2081. ISSN 2190-0558. (Published)

Ibrahim, Kisai (1997) Hand free set 01B-fon for motorbike. Fakulti Pendidikan, Universiti Teknologi Malaysia.

Ibrahim, Mohammad Sollehudin and Peeie, M. H. (2020) The dynamic behavior investigation of electric power wheelchair during the obstacle avoidance. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-18., 788 (012074). ISSN 1757-8981

Ibrahim, Thamir K. and Mohammed, Mohammed Kamil and Awad, Omar I. and M. M., Rahman and G., Najafi and F., Basrawi and R., Mamat (2017) The Optimum Performance of the Combined Cycle Power Plant: A Comprehensive Review. Renewable and Sustainable Energy Reviews, 79. pp. 457-474. ISSN 1364-0321. (Published)

Ibrahim Moh'd Abdel, Qader Saraireh (2022) Bim adoption framework to enhance efficiency of contractual issues in the jordanian construction sector. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Haron, Ahmad Tarmizi).

Ida Rizyani, Tahir (2014) Drivers Of Organizational Innovativeness Among SMEs in Malaysia Halal Industry. International Journal of Science Commerce and Humanities (IJSCH), 2 (2). pp. 119-127. ISSN 2052-6164. (Published)

Idayu, Mat Ali and Nur Hartini, Mohd Hatta (2021) P I organises briefing on UMP Research Fund Grants. UMP News .

Idris, Md Yusof (2008) Application occupational safety and health in industry case study : CCM Fertilizers Sdn Bhd. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ikram, Shafie (2020) Ventilator kos rendah beri kesan terhadap pesakit. UMP News .

Ikreedeegh, Riyadh Ramadhan and Tasleem, Sehar and Hossen, Md Arif (2024) Facile fabrication of binary g-C3N4/NH2-MIL-125(Ti) MOF nanocomposite with Z-scheme heterojunction for efficient photocatalytic H2 production and CO2 reduction under visible light. Fuel, 360 (130561). pp. 1-17. ISSN 0016-2361. (Published)

Imam Ul, Ferdous and N. A., Alang and J., Alias and A. H., Ahmad and Suraya, Mohd Nadzir (2023) Rupture Life and Failure Mechanism of Grade 91 Steel Under the Influence of Notch Constraint. Journal of Failure Analysis and Prevention, 23 (2). pp. 497-510. ISSN 1547-7029. (Published)

Imran Edzereiq, Kamarudin (2011) Countdown to True Wireless Broadband. Bit@FSKKP . p. 10. ISSN 1985-7969

Imtiaz, Ali (2023) Energy, exergy and economic analysis of nano-enhanced phase change materials integrated solar photovoltaic thermal systems. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Indah Thuraya, Herman and Faridah, Mukhrofun and Khairuddin, Md Isa and Naimah, Ibrahim and Mohd Aizudin, Abd Aziz (2021) Methanolysis of Ceiba Petandra (Kapok) seed for high yield fatty acid methyl ester (FAME): A parametric study. In: IOP Conference Series: Earth and Environmental Science, 1st International Conference on Biomass Utilization and Sustainable Energy 2020 , 15-16 December 2020 , Virtual Conference, Universiti Malaysia Perlis (UniMAP). pp. 1-10., 765 (012075). ISSN 1755-1307

Indah Thuraya, Herman and Khairuddin, Md Isa and Naimah, Ibrahim and Farizul Hafizb, Kasim and Mohd Aizudin, Abd Aziz (2021) A single step transesterification process to produce biodiesel from the spent cooking oil. In: IOP Conference Series: Earth and Environmental Science, 1st International Conference on Biomass Utilization and Sustainable Energy 2020 , 15-16 December 2020 , Virtual Conference, Universiti Malaysia Perlis (UniMAP). pp. 1-8., 765 (012077). ISSN 1755-1307

Indok Nuratikah, Nizamudin (2017) Effect of nanoclay on mechanical and thermal properties of kenaf recycle polyethylene wood plastic composites. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Intan Nur Aqiella, Che Aziz and Ahmad Najmuddin, Ibrahim and Ikmanizardi, Basri and Fukuoka, Yasuhiro (2023) Rover wheel assistive grouser shape effects on traction force in flat soft terrain. In: 2023 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2023 - Proceedings , 17 June 2023 , Hybrid, Shah Alam. pp. 281-286.. ISBN 979-835032130-2

Intan Nur Aqiella, Che Aziz and Ahmad Najmuddin, Ibrahim and Ikmanizardi, Basri and Fukuoka, Yasuhiroo (2023) Rover wheel assistive grouser angle of attack effects on traction force in soft terrain. In: 2023 19th IEEE International Colloquium on Signal Processing and Its Applications, CSPA 2023 - Conference Proceedings , 3-4 March 2023 , Kedah. pp. 236-241.. ISBN 978-166547692-8

Intan Shafinaz, Abd Manaf (2020) Transesterification via different intensification methods using waste feedstocks and waste heterogeneous catalysts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Intan Shafinaz, Abd Manaf and Nurul Hajar, Embong and Mohd Hasbi, Ab. Rahim and Gaanty Pragas, Maniam (2016) In-Situ Transesterification Of Spent Bleaching Clay Using CaO Supported On ZnO As A Basic Catalyst. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7229-7232. ISSN 1819-6608. (Published)

Intan Syahiera, Azli and Afkar Rabbani Hidayatullah, Hipeni and Khairatun Najwa, Mohd Amin (2022) Cellulose nanocrystals derived from oil palm empty fruit bunch reinforced natural rubber latex nanocomposites. Journal of Oil Palm Research, 34 (3). pp. 497-505. ISSN 1511-2780. (Published)

Intan Yasmin, Ismail (2016) Monitoring of the surface roughness by using acoustic emission analysis during end milling process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Intansarah Sahira, Mohd Noor (2018) Electroporation of lignocellulosic biomass. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Intisar Ibrahim, Ridwan and Kamilah Radin, Salim and Zulkifli, Adam, and Izzeldin Ibrahim, Mohamed Abdelaziz and Elfadil, Nazar A. (2020) Development and validation of scale using Rasch analysis to measure students' entrepreneurship readiness to learn embedded system design course. In: Procedia Computer Science; 9th World Engineering Education Forum, WEEF 2019 , 13 - 16 November 2019 , Chennai, India. pp. 545-550., 172. ISSN 1877-0509

Iqbal, AKM Asif and Arai, Yoshio (2019) Micromechanical investigation of the fatigue crack propagation and damage development in Al/Al2O3/SiC hybrid metal matrix composite. Russian Journal of Non-Ferrous Metals, 60 (5). pp. 566-574. ISSN 1067-8212. (Published)

Iqbal, AKM Asif and Lim, Mei Jing (2023) A relationship of porosity and mechanical properties of spark plasma sintered scandia stabilized zirconia thermal barrier coating. Results in Engineering, 19 (101263). pp. 1-7. ISSN 2590-1230. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Cionita, Tezara and Siregar, Januar Parlaungan and Laksmidewi, Dwinita and Baskara, Gregorius Dimas and Mohd Zulkifly, Abdullah and Ramli, Junid and Hadi, Agung Efriyo and Mohammad Hazim, Mohamad Hamdan and Najid, Najid (2022) Overview of the important factors influencing the performance of eco-friendly brake pads. Polymers, 14 (1180). pp. 1-22. ISSN 2073-4360. (Published)

Irene, Wei Kiong Ting (2018) UMP launched UMPValid8 and Mobile Wallet UMP Xchain. UMP News . (Unpublished)

Irene, Wei Kiong Ting (2019) Universiti Malaysia Pahang Inks MoU for Knowledge Sharing and Technology Transfer of Engineering and Technology. QS WOW NEWS . (Unpublished)

Irene, Wei Kiong Ting (2018) Universiti Malaysia Pahang and Ningxia University Partnership Exposes Students to Intelligent Technologies. QS WowNews . (Unpublished)

Irene, Wei Kiong Ting (2018) Universiti Malaysia Pahang’s Digital Literacy Program for Preschool Children. QS WowNews . (Unpublished)

Irene, Wei Kiong Ting and Noor Azlinna, Azizan and Kweh, Qian Long (2016) Managerial Overconfidence and Leverage Decision. The Moderating Effect of Human Governance in Malaysia. Journal for Global Business Advancement (JGBA), 9 (1). pp. 38-51. ISSN 1746-966X (print); 1746-9678 (online). (Published)

Irene, Wei Kiong Ting and Noor Azlinna, Azizan and Qian, Long Kweh (2015) Does CEO Ownership Matter in Malaysian Government-controlled Firms' Performance? Journal for International Business and Entrepreneurship Development, 8 (3). pp. 268-280. ISSN 1747-6763. (Published)

Irfan, Ahmed and Fakharuddin, Azhar and Qamar, Wali and Ayib Rosdi, Zainun and Jamil, Ismail and Rajan, Jose (2015) Mesoporous Titania-Vertical Nanorod Films With Interfacial Engineering For High Performance Dye-Sensitized Solar Cells. Nanotechnology, 26 (105401). pp. 1-8. ISSN 0957-4484. (Published)

Irman, Khalil and Mimi Rabita, Abdul Wahit (2021) Lindungi data dan waspada ancaman siber dalam talian. UMP News .

Irman, Khalil and Mimi Rabita, Abdul Wahit (2021) Protect data and be alert to online cyber threats. UMP News .

Irnie Azlin, Zakaria and Wan Ahmad Najmi, Wan Mohamed and N. H.A., Azid and M. A., Suhaimi and Wan Hamzah, Azmi (2022) Heat transfer and electrical discharge of hybrid nanofluid coolants in a fuel cell cooling channel application. Applied Thermal Engineering, 210 (118369). pp. 1-13. ISSN 1359-4311. (Published)

Irnie Azlin, Zakaria and Wan Ahmad Najmi, Wan Mohamed and Wan Azmi, Wan Hamzah (2018) Numerical analysis of SiO2 nanofluid performance in serpentine PEMFC cooling plate. International Journal of Engineering & Technology, 7 (4). pp. 170-174. ISSN 2227-524X. (Published)

Irshad Ahamad, Khilji and Siti Nadiah, Mohd Saffe (2021) Collection of nanoparticles using novel filter process by edm. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Irwan Mahazir, Ismail and Sanmugam, Mageswaran and Hadi, Hassan and Mohamad Basri, Nadzer and Azwin Arif, Abdul Rahim and Nor Yazi, Khamis (2023) Redesigning of Mobile Content to Enhance Learning Activities Preparation by Preschool Experts. International Journal of Interactive Mobile Technologies (iJIM), 17 (15). pp. 53-67. ISSN 1865-7923. (Published)

Irwan Shafrizan, Ismail (2016) TVET tingkat martabat belia. Berita Harian . p. 19.

Irwan Shafrizan, Ismail (2011) UMP tubuh COE tingkat kemahiran IT. Berita Harian .

Ishmael, Ukaegbu Chinonso (2019) Study on antiproliferative activity of hypsizygus tessellatus and flammulina velutipes extracts adsorbed on sulphated zirconia nanoparticles against breast cancer cell lines. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Iskandar, Waini and Nurul Amira, Zainal and Najiyah Safwa, Khasi’ie and Abdul Rahman, Mohd Kasim and Nurul Farahain, Mohammad (2018) Numerical study of unsteady casson fluid flow and heat transfer over a stretching surface with modified magnetic field effects. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 264-265.. ISBN 9789672145202

Islam, Aminul and Roy, Srimonta and Teo, Siow Hwa and Khan, Shahjalal and Taufiq-Yap, Yun Hin and Azrina, Abd Aziz and Monir, Minhaj Uddin and Rashid, Umer and Vo, Dai-Viet N. and Mohd Lokman, Ibrahim and Znad, Hussein and Awual, Md. Rabiul (2022) Functional novel ligand based palladium(II) separation and recovery from e-waste using solvent-ligand approach. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 632 (127767). pp. 1-11. ISSN 0927-7757. (Published)

Islam, M. Amirul and Karim, Ahasanul and Chee, Wai Woon and Ethiraj, Baranitharan and Cheng, C. K. and Yousuf, Abu and Khan, Maksudur R. (2017) Augmentation of Air Cathode Microbial Fuel Cell Performance using Wild Type Klebsiella Variicola. RSC Advances, 7 (8). pp. 4798-4805. ISSN 2046-2069. (Published)

Islam, Md Nahidul and Ahmed, Fahim and Ahammed, Md Tanvir and Rashid, Mamunur and Bari, Bifta Sama (2022) Rice disease identification through leaf image and iot based smart rice fieldmonitoring system. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 529-539., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Islam, Md Nahidul and Norizam, Sulaiman and Rashid, Mamunur and Mahfuzah, Mustafa and Mohd Shawal, Jadin (2021) An intelligent system for hearing disorder detection using auditory evoked potential (AEP) signals. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Islam, Md Shofiqul and Hasan, Khondokar Fida and Sultana, Sunjida and Uddin, Shahadat and Lio’, Pietro and Quinn, Julian M.W. and Moni, Mohammad Ali (2023) HARDC : A novel ECG-based heartbeat classification method to detect arrhythmia using hierarchical attention based dual structured RNN with dilated CNN. Neural Networks, 162. pp. 271-287. ISSN 0893:6080. (Published)

Islam, Md Shofiqul and Islam, Md Nahidul and Noramiza, Hashim and Rashid, Mamunur and Bari, Bifta Sama and Al Farid, Fahmid (2022) New hybrid deep learning approach using bigru-bilstm and multilayered dilated cnn to detect arrhythmia. IEEE Access, 10. pp. 58081-58096. ISSN 2169-3536. (Published)

Islam, Md Shofiqul and Sultana, Sunjida and Farid, Fahmid Al and Islam, Md Nahidul and Rashid, Mamunur and Bari, Bifta Sama and Noramiza, Hashim and Mohd Nizam, Husen (2022) Multimodal hybrid deep learning approach to detect tomato leaf disease using attention based dilated convolution feature extractor with logistic regression classification. Sensors, 22 (6079). pp. 1-31. ISSN 1424-8220. (Published)

Islam, Md. Imamul and Maruf, Md Hasan and Al Mansur, Ahmed and Ashique, Ratil H. and Asif ul Haq, Mohammad and Shihavuddin, Asm S.M. and Mohd Shawal, Jadin (2023) Feasibility analysis of floating photovoltaic power plant in Bangladesh: A case study in Hatirjheel Lake, Dhaka. Sustainable Energy Technologies and Assessments, 55 (102994). pp. 1-16. ISSN 2213-1388. (Published)

Islam, Md. Milon and Haque, Md. Rezwanul and Iqbal, Hasib and Hasan, Md. Munirul and Hasan, Mahmudul and Kabir, Muhammad Nomani (2020) Breast cancer prediction: A comparative study using machine learning techniques. SN Computer Science, 1 (5). pp. 1-14. ISSN 2662-995X. (Published)

Islam, Md. Nahidul and Norizam, Sulaiman and Mahfuzah, Mustafa (2022) Diagnosis of hearing impairment based on wavelet transformation and machine learning approach. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 705-715., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4

Islam, Md. Rafiqul and Lotif, Md. Abdul and Hossain, Md Shazzat and Ullah, Mohammad and Mia, Rony (2023) Sustainable production and evaluation of the properties of polyester-okra blended knitted fabric. Results in Engineering, 17 (100923). pp. 1-8. ISSN 2590-1230. (Published)

Islam, Md. Shaharul (2018) Cellulose supported transition metal (Cu, Pd) catalysts for carbon-carbon and carbon-nitrogen bonds formation reactions. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Tan, Suat Hian).

Islam, Md. Shaharul and Karim, Md. Rezaul and Tan, Suat Hian and Rashid, Shah Samiur and Sarkar, Shaheen M. (2015) Antiamylolytic Activityof Okra (Abelmoschus esculentusL.) Pod Glycoprotein. In: International Conference Of Biotechnology In Health And Agriculture (ICBHA) , 9-10 January 2015 , Dhaka, Bangladesh. pp. 18-19.. ISSN 1802-2685

Islam, Mir Sujaul and Hossain, Mohamed Amjed and Sobahan, Md Abdus and Rasul, Md Golam and Zakaria, I. (2013) Impact of Industrial Effluents on Water Quality of Receiving River in Gebeng Estate, Kuantan, Pahang. In: National Conference on Industry-Academia Initiatives in Biotechnology (CIA:BIOTECH13) , 5-7 December 2013 , Equatorial Cameron Highlands, Pahang. p. 53..

Ismail, Ibrahim and Zuwairie, Ibrahim and Hamzah, Ahmad and Zulkifli, Md. Yusof (2015) An improved multi-state particle swarm optimization for discrete combinatorial optimization problems. International Journal of Simulation: Systems, Science & Technology (IJSSST), 16 (6). 14.1-14.8. ISSN 1473-8031 (print); 1473-804x (online). (Published)

Ismail, Jamil and Ab. Rahim, Mohd Hasbi and Roslan, Rasidi and Mohd Halimi, Abdul Aziz Development of water-based gelling system for high-temperature wellbore cleanout operation. , [Research Report: Research Report] (Unpublished)

Ismail, Khairuddin (2013) Pelajar FKP menang pertandingan reka bentuk inovasi Malaysia. CREATE . p. 28. ISSN 1823-7487

Ismail, Rifky and Fitriyana, Deni Fajar and Bayuseno, Athanasius Priharyoto and Jamari, Jamari and Pradiptya, Putut Yoga and Muhamadin, Rilo Chandra and Nugraha, Fariz Wisda and Rusiyanto, Rusiyanto and Setiyawan, Andri and Bahatmaka, Aldias and Firmansyah, Hendrix Noviyanto and Anis, Samsudin and Irawan, Agustinus Purna and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Investigating the effect of deacetylation temperature on the characterization of chitosan from crab shells as a candidate for organic nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 55-67. ISSN 2289-7879. (Published)

Ismail, Rifky and Fitriyana, Deni Fajar and Bayuseno, Athanasius Priharyoto and Munanda, Rafi and Nugraha, Fariz Wisda and Rusiyanto, R. and Setiyawan, Andri and Bahatmaka, Aldias and Firmansyah, Hendrix Noviyanto and Anis, Samsudin and Irawan, Agustinus Purna and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Design, manufacturing and characterization of biodegradable bone screw from PLA Prepared by fused deposition modelling (FDM) 3D printing technique. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 205-215. ISSN 2289-7879. (Published)

Ismayadi, Ismail and Idza Riati, Ibrahim and Rodziah, Nazlan (2017) Evolution of Magnetic Properties in Ferrites: Trends of Single-Sample and Multi-Sample Sintering. In: Sintering of Functional Materials. InTech, pp. 77-103. ISBN 978-953-51-3757-3

Iwansyah, Ade Chandra and Desnilasari, Dewi and Sholichah, Enny and Agustina, Wawan and Hazrulrizawati, Abd Hamid (2023) Effect of autoclaving-time treatment on physicochemical, antioxidant properties and shelf-life prediction of Indonesian instant cassava leaves porridge. Emirates Journal of Food and Agriculture, 35 (2). pp. 145-152. ISSN 2079-052X. (Published)

Izan Izwan, Misnon and Nurul Khairiyyah, Mohd Zain and Rajan, Jose (2018) Conversion of Oil Palm Kernel Shell Biomass to Activated Carbon for Supercapacitor Electrode Application. Waste and Biomass Valorization. pp. 1-10. ISSN 1877-2641. (In Press / Online First) (In Press / Online First)

Izan Izwan, Misnon and Rajan, Jose (2021) Charge storage in the PANI-α-MnO2polymer-nanocomposite system. In: Materials Today: Proceedings, International Conference on Energy and Environment , 14-15 May 2020 , Paris. pp. 513-519., 41 (Part 3). ISSN 2214-7853

Izan Izwan, Misnon and Saifful Kamaluddin, Muzakir and Nazikussabah, Zaharudin and Muhmmad Nor, Omar (2018) Palm-O-Lite: palm oil based aerosol for culinary applications. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted)

Izatti, Md Amin and Mohd Rafi, Adzman and Haziah, Abdul Hamid and Muhd Hafizi, Idris and Melaty, Amirruddin and Omar, Aliman (2023) Differential equation fault location algorithm with harmonic effects in power system. Telkomnika (Telecommunication Computing Electronics and Control), 21 (3). pp. 684-694. ISSN 1693-6930. (Published)

Izzah Hayati, Yahya and Hazrulrizawati Abd, Hamid (2023) Phenolic profile and antioxidant activities of Rambutan (Nephelium lappaceum) and Pulasan (Nephelium mutabile) peels. In: Malaysian Journal of Chemistry; 3rd IKMPB Online Symposium 2023 - Innovation in Chemistry Towards Sustainable Development , 2023 , Online. pp. 450-457., 25 (3). ISSN 1511-2292

Izzat Hafifi, Ahmad Ariza (2012) Help Desk System. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Izzati, Isahak (2018) Physiological and psychological effects of heat exposure among steel industry workers. Faculty of Engineering Technology, Universiti Malaysia Pahang.

J

Jabbar, Waheb A. and Annathurai, Sanmathy and Tajul Ariffin, A. Rahim and M. Fitri, Mohd Fauzi (2022) Smart energy meter based on a long-range wide-area network for a stand-alone photovoltaic system. Expert Systems with Applications, 197 (116703). pp. 1-18. ISSN 0957-4174. (Published)

Jabbar, Waheb A. and Mahamod, Ismail and Rosdiadee, Nordin (2017) Energy and Mobility Conscious Multipath Routing Scheme for Route Stability and Load Balancing in MANETs. Simulation Modelling Practice and Theory, 77. pp. 245-271. ISSN 1569-190X. (Published)

Jabbar, Waheb A. and Mei Ting, Tan and Mohd Fikri Ikmal, Hamidun and Ajwad Hariz, Che Kamarudin and Wu, Wenyan and Sultan, Jamil and Alsewari, Abdulrahman A. and Mohammad A.H., Ali (2024) Development of LoRaWAN-based IoT system for water quality monitoring in rural areas. Expert Systems with Applications, 242 (122862). pp. 1-18. ISSN 0957-4174. (Published)

Jabbar, Waheb A. and Muhamad Aznawi, Yuzaidi and Kong, Qi Yan and Ummu Sakinah, Mohd Bustaman and Hashim, Yasir and AlAriqi, Hani Taha (2019) Smart and Green Street Lighting System based on arduino and RF wireless module. In: IEEE 8th International Conference On Modeling Simulation And Applied Optimization (ICMSAO 2019) , 15-17 April 2019 , University of Bahrain, Bahrain. pp. 1-6.. ISBN 978-1-5386-7684-4

Jabbar, Waheb A. and Subramaniam, Thanasrii and Ong, Andre Emelio and Mohd Iqmal, Shu'Ib and Wu, Wenyan and de Oliveira, Mario A. (2022) LoRaWAN-Based iot system implementation for long-range outdoor air quality monitoring. Internet of Things, 19 (100540). pp. 1-25. ISSN 2542-6605. (Published)

Jabbar, Waheb A. and Tiew, Lu Yi and Nadiah Yasmin, Ali Shah (2024) Internet of things enabled parking management system using long range wide area network for smart city. Internet of Things and Cyber-Physical Systems, 4. pp. 82-98. ISSN 2667-3452. (Published)

Jaber, Ali Y. and L. A., Latiff and Norulhusna, Ahmad and Abdalla, Ahmed N. (2015) Joint Clipping and Amplifying Techniques for PAPR Reduction in OFDM Systems. In: 1st International Conference on Telematics and Future Generation Networks (TAFGEN) , 26-28 May 2015 , Kuala Lumpur. pp. 54-58.. ISBN 978-1-4799-7315-6

Jaber, Aws Naser and Mazlina, Abdul Majid and Kamal Z., Zamli and Mohamad Fadli, Zolkipli Privacy Concerns due to Class Elements in Cloud Environments despite Full Homomorphic Encryption. 3rd scienceone international conference Technology . (Published)

Jaber, Aws Naser and Mazlina, Abdul Majid and Kamal Z., Zamli and Mohamad Fadli, Zolkipli Processing Data in Cloud Environments without the Need for Decryption. ICIT 2015 3rd scienceOne International Conference On Information Technology. (Published)

Jaber, Aws Naser and Mohamad Fadli, Zolkipli and D. Ahmed, Firas D. Ahmed and Mazlina, Abdul Majid (2015) Security Everywhere Cloud: An Intensive Review of DoS and DDoS Attacks in Cloud Computing. Journal of Advanced & Applied Sciences (JAAS), 3 (5). pp. 152-158. ISSN 2289-6260. (Published)

Jacob, Jeeja and Pandey, Adarsh Kumar and Nasrudin, Abd Rahim and Selvaraj, Jeyraj and Paul Nadakkal, John (2024) Multi-wall carbon nanotubes tailored eutectic composites for solar energy harvesting. Energy, 288 (129777). pp. 1-12. ISSN 0360-5442. (Published)

Jacob, Jeeja and Pandey, Adarsh Kumar and Nasrudin, Abd Rahim and Selvaraj, Jeyraj A.L. and Samykano, Mahendran and Saidur, Rahman Md and Tyagi, Vineet Veer (2022) Concentrated Photovoltaic Thermal (CPVT) systems : Recent advancements in clean energy applications, thermal management and storage. Journal of Energy Storage, 45 (103369). pp. 1-25. ISSN 2352-152X. (Published)

Jadhav, Pramod and Bin Khalid, Zaied and Mishra, Puranjan and Zularisam, Abdul Wahid and Mohd Nasrullah, Zulkifli (2022) Challenges and emerging approaches in life cycle assessment of engineered nanomaterials usage in anaerobic bioreactor. In: Techno economics and Life Cycle Assessment of Bioreactors: Post-Covid19 Waste Management Approach. Elsevier, India, pp. 185-206. ISBN 978-0-323-89848-5

Jadhav Pramod, Chandrakant (2023) Trimetallic nanoparticles in anaerobic digestion process for biogas production. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Nasrullah, Zulkifli).

Jahan, Israt and Uddin, K. M. Aslam and Murad, Saydul Akbar and Miah, Md Saef Ullah and Khan, Tanvir Zaman and Masud, Mehedi and Aljahdali, Sultan and Bairagi, Anupam Kumar (2023) 4D : A real-time driver drowsiness detector using deep learning. Electronics (Switzerland), 12 (235). pp. 1-17. ISSN 2079-9292. (Published)

Jain, N. K. and Pathak, Sunil and Alam, Muneer (2018) Synthesis of Copper Nanoparticles by Pulsed Electrochemical Dissolution Process. Industrial and Engineering Chemistry Research. pp. 1-7. ISSN 0888-5885. (In Press / Online First) (In Press / Online First)

Jaliliantabar, Farzad and Najafi, Gholamhassan and Rizalman, Mamat and Ghobadian, Barat (2020) Prediction of maximum in-cylinder pressure by adaptive neuro-fuzzy inference system method. IOP Conf. Series: Materials Science and Engineering, 788 (012066). pp. 1-11. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Jaliliantabar, Farzad and Rizalman, Mamat and Kumarasamy, Sudhakar (2022) Latent heat prediction of nano enhanced phase change material by ann method. Energy Engineering: Journal of the Association of Energy Engineering, 119 (3). pp. 847-861. ISSN 0199-8595. (Published)

Jamal Hisham, Hashim and Mohammad Adam, Adman and Zailina, Hashim and Mohd Firdaus, Mohd Rad and Soo, Chen Kwan (2021) COVID-19 epidemic in Malaysia: Epidemic progression, challenges, and response. Frontiers in Public Health, 9 (560592). pp. 1-19. ISSN 2296-2565. (Published)

Jarial, Rini (2017) Extraction, characterization and purification of flavonoids from filicophytes. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Jarial, Rini and Singh, Lakhveer and Thakur, Sveta and Zularisam, A. W. and Mimi Sakinah, A. M. and S. S., Kanwar (2017) Evaluation of Antilipolytic, Antioxidant and Antibacterial Activities of Selected Ferns. Journal of Applied Pharmaceutical Science, 7 (6). pp. 150-156. ISSN 2231-3354. (Published)

Jarrud Mohamed, Muftah Mohamed (2022) Flexural performance of built-up cold-formed steel beam (CFSB) filled with concrete. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Lim, Kar Sing).

Jasim, Saleh Eesaa (2018) Miniaturization of microwave bandpass filters using nanostructured and bulk YBa2Cu3O7−δ superconductor films. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Ashry, Jusoh).

Javed, Omama and Abd Aziz, Radhiyah (2022) Review: Two-dimensional layered material based electrodes for lithium ion and sodium ion batteries. In: Lecture Notes in Electrical Engineering; 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 399-418., 882. ISSN 1876-1100 ISBN 978-981191576-5

Javed, Omama and Radhiyah, Abd Aziz (2022) Effect of graphene oxide loading on cobalt oxide performance as electrocatalyst for methanol oxidation reaction. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 126..

Jayabharty, Mogan and Wan Sharuzi, Wan Harun and Ishak, Ismail and Fadhlur Rahman, Mohd Romlay (2022) Parameter influence on mechanical properties of ABS; using FDM. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 68..

Jebunnesa (2014) Occupational English writing test for potential nurses in Kuantan Pahang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Jessnor Arif, Mat Jizat (2014) Landmark guided trajectory of an automated guided vehicle using omnidirectional vision. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zahari, Taha).

Ji, Yuanfa and He, Jianzhong and Sun, Xiyan and Bai, Yang and Wei, Zhaochuan and Kamarul Hawari, Ghazali (2022) Learning augmented memory joint aberrance repressed correlation filters for visual tracking. Symmetry, 14 (1502). pp. 1-19. ISSN 2073-8994. (Published)

Ji, Yuanfa and Liu, Yu and Sun, Xiyan and Guo, Ning and Zhao, Songke and Kamarul Hawari, Ghazali (2022) Modeling and correction analysis of regional ionospheric modeling. In: IEEE 6th Information Technology and Mechatronics Engineering Conference, ITOEC 2022 , 4-6 March 2022 , Chongqing. pp. 1037-1042. (177924). ISBN 978-166543185-9

Ji, Yuanfa and Song, Sisi and Sun, Xiyan and Kamarul Hawari, Ghazali and Zhao, Songke (2022) Analysis of anti-multipath performance based on traditional acquisition algorithm of boc signal. In: 2022 IEEE 5th International Conference on Artificial Intelligence and Big Data, ICAIBD 2022 , 27-30 May 2022 , Virtual, Chengdu. pp. 455-458. (180907). ISBN 978-166549913-2

Jia Chien, Lee and Hanida, Abdul Aziz and Hairunnisa, Osman (2021) In-service piping inspection work-aid tool for process industries. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Jilan, Ahmad Zakki (2015) 76 guru sertai program Empower ECER Mahkota. Utusan Malaysia .

JinKiong, Ling and Chelladurai, Karuppiah and Syam G., Krishnan and M. V., Reddy and Izan Izwan, Misnon and Mohd Hasbi, Ab. Rahim and Chun-Chen, Yang and Rajan, Jose (2021) Phosphate polyanion materials as high-voltage lithium-ion battery cathode: A review. Energy Fuels, 35 (13). pp. 10428-10450. ISSN 1520-5029. (Published)

JinKiong, Ling and Pradeep, Kumar and Kizhakkedath, Koyadan and Watson, Trystan M. and Mora-Sero, Ivan and Schmidt-Mende, Lukas and Brown, Thomas M. and Rajan, Jose (2021) A perspective on the commercial viability of perovskite solar cells. Solar RRL. pp. 1-48. ISSN 2367-198X. (In Press / Online First) (In Press / Online First)

Jing Thin, Heng and Abdulbari, Hayder A. and Abdullah Mohammed Basher, Esmail (2019) Assessment of capacitive deionization microfluidic desalination via electrode microstructure analysis. In: Materials Today: Proceedings ; 2018 International Conference on Chemical Sciences and Engineering: Advance and New Materials, ICCSE 2018 , 7-8 November 2018 , Melaka. pp. 1354-1362., 19. ISSN 2214-7853

Jing Yu, Chong and Wan Nurul Emilia, Zolkepeli and Nurhafizah, Sazali and Nur Anis Najihah, Zulkifli and Syahir Izzuddin Imani, Hamidon and Suziyana, Mat Dahan (2021) Crowd alert board for deterring overcrowding. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Johari, N. A. and F. R. M., Romlay and W. S., Wan Harun (2019) SS 316L/HA composite via powder injection moulding: Mechanical and physical properties. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5480 -5492. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

John Paul, Nadakkal and Kadirgama, Kumaran and Samykano, Mahendran (2022) Thermophysical characterization of paraffin/palmitic acid binary eutectic composite for thermal energy harvesting. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 66..

Jokhio, Gul A. and Al-Tawil, Y. M.Y. and Sharifah Maszura, Syed Mohsin and Gul, Yasmeen and Noram Irwan, Ramli (2018) Compressive and Flexural Tests on Adobe Samples Reinforced with Wire Mesh. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-12., 318 (1). ISSN 17578981

Jokhio, Gul A. and Sharifah Maszura, Syed Mohsin and Gul, Yasmeen (2018) Statistical analysis of compressive and flexural test results on the sustainable adobe reinforced with steel wire mesh. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 1-2 March 2018 , Universiti Malaysia Pahang. pp. 1-8., 342 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Jokhio, Gul A. and Sharifah Maszura, Syed Mohsin and Gul, Yasmeen (2018) Two-fold sustainability - Adobe with sawdust as partial sand replacement. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 1-2 March 2018 , Universiti Malaysia Pahang. pp. 1-6., 342 (1). ISSN 1757-8981(print); 1757-899X(online)

Jolius, Gimbun and Jessinta, Sandanasamy and Afiqah, Yeop and Sook, Fun Pang and M. M., Yusoff (2018) Thermal degradation kinetics of Labisia pumila’s polyphenols. In: International Conference On Recent Trends In Analytical Chemistry (ICORTAC-2018) , 15 - 17 March 2018 , University of Madras. pp. 1-8.. (Unpublished)

Jose, Rajan and Misnon, Izan Izwan and Ismail, Jamil (2016) Tailoring the electrochemical propertiesof titanium dioxide for high performance energy storage device. , [Research Report: Research Report] (Unpublished)

Judy, Wong (2018) Treated polystyrene microcarriers vero cells using ultraviolet/ozone (UVO) expansion of serum-free medium adapted. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Jui, Julakha Jahan and Mohd Ashraf, Ahmad and Muhammad Ikram, Mohd Rashid (2022) Metaheuristics algorithms to identify nonlinear Hammerstein model: A decade survey. Bulletin of Electrical Engineering and Informatics, 11 (1). pp. 454-465. ISSN 2089-3191. (Published)

Jui, Julakha Jahan and Mohd Ashraf, Ahmad and Muhammad Ikram, Mohd Rashid (2020) Modified multi-verse optimizer for solving numerical optimization problems. In: 2020 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS) , 20 June 2020 , Shah Alam, Selangor, Malaysia. pp. 81-86.. ISBN 978-1-7281-6133-4

Jui, Julakha Jahan and Molla, M. M.Imran and Alam, Mohammad Khurshed and Ferdowsi, Asma (2022) Prostate cancer prediction using feedforward neural network trained with particle swarm optimizer. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 395-405., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4

Juliana, Md Nor (2016) The importance of reliability of machine on operational improvement : a case study. Faculty of Industrial Management, Universiti Malaysia Pahang.

Juliawati, Alias and Fatin Ayuni, Ramlan and Nurul Amiratul, Johari and Nalliah, Nivishan and Abd Anasghaneem, Abd Aziz and Nasrul Azuan, Alang (2021) “Aloe-heal coat” smart self-healing coating for anti-corrosion of automotive components. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Juliza, Mohamad Arif and Mohd Faizal, Ab Razak and Sharfah Ratibah, Tuan Mat (2021) Android mobile malware detection system using fuzzy AHP. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Jun, Yan Tai and Kah, Hon Leong and Pichiah, Saravanan and Azrina, Abd Aziz (2017) Dopant-free Oxygen-rich Titanium Dioxide: LED Light-induced Photocatalysis and Mechanism Insight. Journal of Materials Science and Chemical Engineering, 52 (19). pp. 11630-11642. ISSN 2327-6045 (print); 2327-6053 (online). (Published)

Jun Haslinda, Shariffuddin and Mohd Faizal, Ali and Nayeem, Abdullah (2021) Polysulfide: Sorbent made from waste cooking palm oil for petroleum refinery wastewater. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Junaedi Irwan, Wan Abdul Halim (2021) Estimate the Air Conditioner Capacity. UMP News .

Junaidah, Zakaria and Che Rosmani, Che Hassan and Mahar Diana, Hamid and Ezrin Hani, Sukadarin (2019) Safety climate factors at selected chemical manufacturing plant in Malaysia. Process Safety Progress (e12096). ISSN 1547-5913. (Published)

Junaidi, Rahman (2017) A study on effectiveness of pedestrian bridge utilization at Jalan Tanah Putih. Faculty of Engineering Technology, Universiti Malaysia Pahang.

June Poh, Kim Tam and Fernando, Yudi (2018) Ecological Performance as a New Metric to Measure Green Supply Chain Practices. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5357-5366. ISBN 9781522522553

Juraidah, Ahmad and Ekarizan, Shaffie and Norfarah Nadia, Ismail and Haryati, Awang and Masyitah, Md Nujid (2023) Investigation on the effect of moisture induced damage on asphaltic concrete mix incorporating waste concrete aggregates. In: IOP Conference Series: Earth and Environmental Science; 1st 2022 International Conference on Sustainable Environment, Development, and Energy, CONSER 2022 , 5-6 December 2022 , Sanur, Denpasar City, Bali. pp. 1-9., 1151 (012044). ISSN 1755-1307

Juwairiah, Osman (2021) UMP Orator Club organises International Online Pidato Malaysia Sejahtera 2020. UMP News .

K

K., Balakrishnan and N.F., Buang and Mohammad Adam, Adman (2022) Factors affecting construction productivity: comparative study between worker's nationality. UMP Research Series: Construction Engineering and Management, 1 (1). pp. 20-30. ISSN 978-967-2831-41-9. (Published)

K., Kadirgama (2017) Investigation of Chip and Surface Roughness when Milling AISI304 Stainless Steel. In: Engineering and Innovative Materials V. Trans Tech Publications Ltd, pp. 152-158. ISBN 9783038357704

K., Kadirgama and A. K., Amiruddin and R. A., Bakar (2014) Estimation Of Solar Radiation By Artificial Networks: East Coast Malaysia. Energy Procedia, 52. pp. 383-388. ISSN 1876-6102 . (Published)

K. E., Leong and Kar Sing, Lim and Ahmad Syahrizan, Sulaiman and Siew Choo, Chin and N., Yahaya (2020) Effect of defect width upon burst capacity of composite repaired pipe. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-9., 712 (012018). ISSN 1757-899X

Kadhem, Athraa Ali and Noor Izzri, Abdul Wahab and Ishak, Aris and Jasronita, Jasni and Abdalla, Ahmed N. (2017) Reliability Assessment of Power Generation Systems Using Intelligent Search Based on Disparity Theory. Energies, 10 (3). pp. 1-13. ISSN 1996-1073 . (Published)

Kadhim, Saleem Khalefa and Ali, Sinan Abdulghafar and Razak, N. F. D. and M. S. M., Sani (2021) Vertical vibrations effect on forced convection heat transfer from a longitudinal finned tube. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-13., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Kadhim, Wafaa A. and Al-Jadir, Thaer and Albrazanjy, Mohammed G. and Al-Rubaiey, Njim A and Dakhil, Ali Mohammed and Al-Saedi, Noor Dheyaa and Mohd Hairul, Ab. Rahim (2021) Sulphide pollutants elimination and degradation in petroleum wastewater by ozonation process. In: IOP Conference Series: Earth and Environmental Science, Fifth International Scientific Conference on Environment and Sustainable Development , 1-2 June 2021 , Baghdad, Iraq & Istanbul, Turkey. pp. 1-7., 779 (012086). ISSN 1755-1307

Kadhum, Laith M. and Zainal Abidin, Ahmad Firdaus and Zolkipli, Mohamad Fadli and Hisham, Syifak Izhar and Bayuaji, L. and Ab Razak, Mohd Faizal (2023) Auto–transition in RADG based on chaotic system. Iraqi Journal for Computer Science and Mathematics (IJCSM), 4 (2). pp. 1-12. ISSN 2788-7421. (Published)

Kadirgama, Kumaran and Awad, Omar I. and Mohammed, M.N and Tao, Hai and Bash, Ali A. H. Karah (2023) Sustainable green energy management : Optimizing scheduling of multi-energy systems considered energy cost and emission using attractive repulsive shuffled frog-leaping. Sustainability, 15 (10755). pp. 1-19. ISSN 2071-1050. (Published)

Kadirgama, Kumaran and Chelian, Ilen and Rahman, Md Mustafizur and Devarajan, Ramasamy and Mahendran, Samykano and Samylingam, Lingenthiran and Rahman, Saidur (2021) Mxene enrich concentration solar power (CSP) coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Kafi, A. K.M. and Alim, Samiul Development of glucose biosensor based on nanomaterials-enzyme cross-linked network. , [Research Report: Research Report] (Unpublished)

Kafi, A. K.M. and Alim, Samiul Fabrication of an electrode surface based on nanotubenanoparticle hybrid network for hydrogen peroxide biosensing. , [Research Report: Research Report] (Unpublished)

Kah, Hon Leong and Azrina, Abd Aziz and Lan, Ching Sim and Saravanan, Pichiah and Jang, Min and Bahnemann, Detlef (2018) Mechanistic Insights Into Plasmonic Photocatalysts in Utilizing Visible Light. Beilstein Journal of Nanotechnology, 9. pp. 628-648. ISSN 2190-4286. (Published)

Kah, Hon Leong and Azrina, Abd Aziz and Yee, Li Kang and Sheau, Wei Goh and Kulhar, Vijay Singh and Lan, Ching Sim and Pichiah, Saravanan (2017) Synergized Mechanistic and Solar Photocatalysis Features of N-TiO2 Functionalised Activated Carbon. AIMS Materials Science, 4 (3). pp. 800-813. ISSN 2372-0484. (Published)

Kai, Gavin Lim Jiann and Ahmad Fakhri, Ab Nasir and Anwar, P. P. Abdul Majeed and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Li, Lim Thai (2022) The classification of impact signal of 6 DOF cobot by means of machine learning model. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. 553- 560., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Kalaiarasan, Muthusamy and Mimi Sakinah, A. M. (2020) Optimization of Rebaudioside A extraction from stevia leaves using response surface methodology. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-10., 736 (062024). ISSN 1757-899X

Kalidasan, B. and Pandey, Adarsh Kumar and Saidur, Rahman Md and Samykano, Mahendran and Tyagi, Vineet Veer (2022) Optical absorptivity and thermal conductivity analysis of silver nanoparticle dispersed salt hydrate PCM. In: 2022 IEEE International Conference on Power and Energy : Advancement in Power and Energy Systems towards Sustainable and Resilient Energy Supply, PECon 2022Pages 203 - 2082022; 9th IEEE International Conference on Power and Energy, PECon 2022 , 5 - 6 December 2022 , Langkawi, Kedah. pp. 328-332. (185592). ISBN 978-166540990-2

Kalidasan, B. and Pandey, Adarsh Kumar and Saidur, Rahman Md and Yadav, Aman and Samykano, Mahendran and Tyagi, Vineet Veer (2022) Graphene–silver hybrid nanoparticle based organic phase change materials for enhanced thermal energy storage. Sustainability (Switzerland), 14 (13240). pp. 1-16. ISSN 2071-1050. (Published)

Kalpana, Ramachandran (2021) UMP PhD student excel in national level 3MT Competition. UMP News .

Kamal, Yusoh (2024) Peranan universiti sebar manfaat AI. Kosmo . p. 22.

Kamal Z., Zamli (2016) A Chaotic Teaching Learning Based Optimization Algorithm for Optimization Emergency Flood Evacuation Routing. In: International Symposium of Information and Internet Technology , 26 - 28 Jan 2016 , Melaka. .

Kamal Z., Zamli and Alsariera, Yazan A. (2015) A Bat-inspired Strategy for T-Way Interaction Testing. Advanced Science Letters, 21 (7). pp. 2281-2284. ISSN 1936-6612. (Published)

Kamal Z., Zamli and Alsariera, Yazan A. and Nasser, Abdullah B. (2016) Benchmarking of Bat-inspired Interaction Testing Strategy. International Journal of Computer Science and Information Engineering (IJCSIE), 7 (1). pp. 71-79. ISSN 0976-626X. (Published)

Kamal Z., Zamli and Alsariera, Yazan A. and Nasser, Abdullah B. and Alsewari, Abdulrahman A. (2015) On Adopting Parameter Free Optimization Algorithms for Combinatorial Interaction Testing. Journal of Engineering and Applied Sciences, 10 (19). pp. 8987-8994. ISSN 1819-6608 . (Published)

Kamal Z., Zamli and Mazlina, Abdul Majid and Azlina, Zainuddin (2013) Constraints T-Way Testing Strategy With Modified Condition /Decision Coverage (MC/DC). In: Malaysian Technical Universities Conference Technology on Engineering and Technology (MUCET) , 3-4 December 2013 , MS Garden Hotel, Kuantan. p. 1..

Kamal Z., Zamli and Nasser, Abdullah B. and AlSariera, Yazan A. and Al-Sewari, Abdul Rahman Ahmed Mohammed (2015) A Cuckoo Search Based Pairwise Strategy For Combinatorial Testing Problem. Journal of Theoretical and Applied Information Technology, 82 (1). pp. 154-162. ISSN 1992-8645 . (Published)

Kamal Z., Zamli and Yazan A., Alsariera and Mazlina, Abdul Majid (2015) SPLBA: an interaction strategy for testing software product lines using the bat-inspired algorithm. In: 2015 4th International Conference on Software Engineering and Computer Systems (ICSECS) , 19-21 August 2015 , Kuantan, Malaysia. pp. 148-153.. ISBN 978-146736722-6

Kamaliah, Abdul Samad and Norazwina, Zainol and Hafizuddin, Wan Yussof and Zulsyazwan, Ahmad Khushairi and Nurul Shareena Aqmar, Mohd Sharif and Nur Syahirah, Mohd Syukri (2020) Isolation, identification and characterization of soil bacteria for the production of ferulic acid through co-culture fermentation using banana stem waste. SN Applied Sciences, 2 (3). pp. 1-12. ISSN 2523-3971. (Published)

Kamaluddin, Nur Amirah and Hafizoah, Kassim and Kassim, Murizah (2023) 3D Augmented Reality Marker-based Mobile Apps Design of Face Mask Layer. International Journal on Informatics Visualization, 7 (1). pp. 44-50. ISSN 2549-9904. (Published)

Kamarul Hawari, Ghazali and Jie, Maa and Rui, Xiao (2012) A PERCLOS-based Driver Fatigue Detection based Driver Fatigue Detection. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 51-54..

Kamarul Nizam, Hassan and Jamaluddin, Mahmud and Anwar, P. P. Abdul Majeed and Mohd Azman, Yahaya (2018) Quantifying tensile properties of bamboo silicone biocomposite using Yeoh Model. International Journal of Engineering & Technology, 7 (4). pp. 245-250. ISSN 2227-524X. (Published)

Kamarulzaman, Mahmad Khairai and Sutarto, Auditya Purwandini and Muhammad Nubli, Abdul Wahab (2020) The Influence of Stress on Industrial Operator’s Physiology and Work Performance. Jurnal Optimasi Sistem Industri, 19 (2). pp. 82-90. ISSN 2442-8795. (Published)

Kamil, Samar and Siti Norul Huda, Sheikh Abdullah and Ahmad Firdaus, Zainal Abidin and Usman, Opeyemi Lateef (2022) The rise of ransomware: a review of attacks, detection techniques, and future challenges. In: 2022 International Conference on Business Analytics for Technology and Security, ICBATS 2022 , 16-17 February 2022 , Dubai. pp. 1-7. (179001). ISBN 978-166540920-9

Kamil Zakwan, Mohd Azmi and Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and Anwar, P. P. Abdul Majeed (2021) A Simulated Kalman Filter (SKF) approach in identifying optimum speed during cornering. In: RiTA 2020: Proceedings of the 8th International Conference on Robot Intelligence Technology and Applications , 11-13 December 2020 , Virtual hosted by EUREKA Robotics Lab, Cardiff School of Technologies, Cardiff Metropolitan University. pp. 433-439.. ISBN 978-981-16-4802-1

Kamrul Fakir, Kamarudin and Nur Farah, Mohd Shukuri and Nazlina Haiza, Mohd Yasin and Suresh, Thanakodi and Azizi, Miskon and Mohd Sobri, Takriff (2021) Assessment of biohydrogen injection system through Arduino setting in photosynthetic and dark fermentation by local microalgae culture. Sains Malaysiana, 50 (5). pp. 1221-1232. ISSN 0126-6039. (Published)

Kanagesan, Karthiani and Rahmath, Abdulla and Eryati, Derman and Mohd Khalizan, Sabullah and Govindan, Natanamurugaraj and Gansau, Jualang Azlan (2022) A sustainable approach to green algal bioplastics production from brown seaweeds of Sabah, Malaysia. Journal of King Saud University - Science, 34 (102268). pp. 1-7. ISSN 1018-3647. (Published)

Kang, Cheng Yong (2014) WebGL tower defense game with implementation of A* intelligence technique. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Kao, Fangchen and Ting, Irene Wei Kiong and Chou, Hanchung and Liu, Yisung (2022) Exploring the Influence of corporate social responsibility on efficiency : An extended dynamic data envelopment analysis of the global airline industry. Sustainability (Switzerland), 14 (12712). pp. 1-21. ISSN 2071-1050. (Published)

Karim, Ahasanul and Yousuf, Abu and M. Amirul, Islam and H. Naif, Yasir and C. K. M., Faizal and Alam, Md. Zahangir and Pirozzi, Domenico (2018) Microbial lipid extraction from Lipomyces starkeyi using irreversible electroporation. Biotechnology Progress, 34 (4). pp. 838-845. ISSN 1520-6033. (Published)

Karim, Kaykobad Md Rezaul and Huei, Ruey Ong and Hamidah, Abdullah and Yousuf, Abu and Cheng, C. K. and Khan, Maksudur R. (2018) Electrochemical study of copper ferrite as a catalyst for CO2 photoelectrochemical reduction. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (2). pp. 236-244. ISSN 1978-2993. (Published)

Karim Khan, Md Fazlul and Rashid, Shah Samiur and Aizi Nor Mazila, Ramli and Kabir, Muhammad Nomani and Hasan Maziz, Mohammad Nazmul (2022) The characterisation of diarrhoeagenic verotoxin producing non-o157 coli among young children in Kuantan, Malaysia. Malaysian Journal of Medical Sciences, 29 (2). pp. 55-68. ISSN 1394-195X. (Published)

Karthiani, Kanagesan (2022) Cultivation of microalgae nannochloropsis sp. In palm oil mill effluent for biodiesel production. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Natanamurugaraj, Govindan).

Karthick Murugan, Palanisamy and Gaanty Pragas, Maniam and Mohd Hasbi, Ab. Rahim and Natanamurugaraj, Govindan (2022) Palm oil mill effluent for lipid production by the diatom thalassiosira pseudonana. Fermentation, 8 (1). pp. 1-16. ISSN 2311-5637. (Published)

Kasran, Abdullah (2014) MTUN technology showcase. Quest, 12 (8). pp. 3-4. ISSN 1985-8159

Kassem, Mukhtar A. and Afiqah R., Radzi and Pradeep, Asankha and Algahtany, Mohammed and Abdul Rahimi, Abdul Rahman (2023) Impacts and response strategies of the COVID-19 pandemic on the construction industry using structural equation modeling. Sustainability (Switzerland), 15 (2672). pp. 1-24. ISSN 2071-1050. (Published)

Kazem, Shahverdi and Gholamhassan, Najafi and Rizalman, Mamat and Mohd Fairusham, Ghazali and A.S., EI-Shafy and Mohamed, Mousa (2023) Introducing a design procedure for Archimedes Screw Turbine based on optimization algorithm. Energy for Sustainable Development, 72. pp. 162-172. ISSN 0973-0826. (Published)

Kee, Heng Yik (2019) Psychological impact of noise exposure among machine operators and non-machine operators in construction sites in Perak, Malaysia. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Kee, Heng Yik and Nur Syafiqah, Fauzan and Widia, Mirta (2019) Psychological impact of noise exposure among machine and non-machine operators in construction industry. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012055). ISSN 1757-8981

Kee, Wen Sia (2014) Interactive 3D shapes educational game for dyslexia children. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Keng, Ngui Wai and Mohd Salman, Leong and Mohd Ibrahim, Shapiai and Hee, Lim Meng (2023) Blade fault localization with the use of vibration signals through artificial neural network: a data-driven approach. Pertanika Journal of Science and Technology, 31 (1). pp. 51-68. ISSN 0128-7680. (Published)

Khair, Nazmus Sakib and Nurhafizah, Abu Talip Yusof and Yasmin, Abdul Wahab and Bari, Bifta Sama and Nur Idayu, Ayob and Maizatul, Zolkapli (2023) Substrate-integrated waveguide (SIW) microwave sensor theory and model in characterising dielectric material : A review. Sensors International, 4 (100244). pp. 1-10. ISSN 2666-3511. (Published)

Khairatul Ainal, Abdul Karim (2011) UMP jalin kerjasama dengan TM. Utusan Malaysia .

Khairatun Najwa, Mohd Amin (2022) 13 - Enhanced thermal stability of cellulose nanocrystals for processing polymer nanocomposites at a high temperature. In: Industrial Applications of Nanocellulose and Its Nanocomposites. A volume in Woodhead Publishing Series in Composites Science and Engineering . Elsevier, New Delhi, India, pp. 327-335. ISBN 978-0-323-89909-3 (Printed); 978-0-323-89917-8 (Online)

Khairatun Najwa, Mohd Amin and Hosseinmardi, Alireza and Martin, Darren J. and Annamalai, Pratheep K. (2022) A mixed acid methodology to produce thermally stable cellulose nanocrystal at high yield using phosphoric acid. Journal of Bioresources and Bioproducts, 7 (2). pp. 99-108. ISSN 2369-9698. (Published)

Khairiana, Razali and Mohammad Adam, Adman and Nurul Fairuz, Buang (2023) A survey of perspectives on safety, health, and emergency preparedness among employees: A case study at Bentong Community College. Asian Journal of Civilizational Studies (AJOCS), 5 (3). pp. 1-6. ISSN 2682-8022. (Published)

Khairil Azman, Masri and Rashida Ferdaus, Rashida and Nur Ezreen, Jasni and Md Shahnewaz, Shoaib and Hasan, Kamrul (2021) GreenPave. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Khairina, Yasin (2013) Yo! pelajar UMP terbaik keseluruhan. Berita Harian .

Khairul, Mohd Arshad and Muhamad, Mat Noor and Asrulnizam, Abd Manaf and Kawarada, Hiroshi and Falina, Shaili and Mohd, Syamsul (2022) A comparative modelling study of new robust packaging technology 1mm2 VCSEL packages and their mechanical stress properties. Micromachines, 13 (1513). pp. 1-15. ISSN 2072-666X. (Published)

Khairul, Mohd Arshad and Muhamad, Mat Noor and Asrulnizam, Abd Manaf and Kawarada, Hiroshi and Shaili Falina, Mohd Sukri and Mohd Nasyriq, Syamsul (2022) A comparative modelling study of new robust packaging technology 1 mm2 VCSEL packages and their mechanical stress properties. Micromachines, 13 (1513). pp. 1-15. ISSN 2072-666X. (Published)

Khairul Anuar, Abdul Samad (2003) Semua urusan secara online di KUKTEM. Berita Harian .

Khairul Shah, Affendy Yakof and Nor Fazlin, Zabudin and Idris, Mat Sahat and Mohd Azrul Hisham, Mohd Adib (2018) Development of 3D printed heart model for medical training. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 109-116. ISBN 9789811087875

Khairull Nasruddin, Mansor and Mohd Shakirun Amin, Abdul Halim and Nazruddin, Mat Ali and W. Z. W. A., Rahman and Syamsul Bahari, Abdullah (2019) Integrating ILS in dissolving palm fruit cellulose. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (1). ISSN 1757-8981

Khairulnadzmi, Jamaluddin and Sharifah Rafidah, Wan Alwi and Zainuddin, Abdul Manan and Khaidzir, Hamzah and Klemeš, Jiří Jaromír and Roziah, Zailan (2022) Optimal nuclear trigeneration system considering life cycle costing. Journal of Cleaner Production, 370 (133399). pp. 1-20. ISSN 0959-6526. (Published)

Khairunisa, Muthusamy and Mohd Hafizuddin, Rasid and Nurul Nabilah, Isa and Nurliyana Hanis, Hamdan and Nurul Atikah Shafika, Jamil and Mokhtar Albshir Budiea, Ahmed and Saffuan, Wan Ahmad (2020) Mechanical properties and acid resistance of oil palm shell lightweight aggregate concrete containing coal bottom ash. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 47-50., 41. ISSN 2214-7853

Khairunisa, Muthusamy and N. A., Zamri and Andri, Kusbiantoro and N. H. A. S., Lim and M. A., Mohd Ariffin (2018) Effect of palm oil fuel ash on compressive strength of palm oil boiler stone lightweight aggregate concrete. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 17578981

Khairunisa, Muthusamy and Rahimah, Embong and Sharifah Maszura, Syed Mohsin and Nur Farhayu, Ariffin and Nabilla, Mohamad and Hanis Nadiah, Ruslan (2021) Eco-cement: Save the mother nature. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Khairunnisa, Muhammad Husain (2016) A Study of optimum oil palm frond (OPF) ratio in cement sand brick. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Khaled Abdul Rahman, Jomaa and Cheng, Jack Kie (2017) An integrated model to control traffic lights : controlling of traffic lights in multiple intersections using fuzzy logic and genetic algorithm. Business and Economics Journal, 8 (1). pp. 1-9. ISSN 2151-6219. (Published)

Khalid Adam, Ismail Hammad (2021) Development of low-overhead soft error mitigation technique for safety critical neural networks applications. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khalid Adam, Ismail Hammad (2017) Mapreduce algorithm for weather dataset. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mazlina, Abdul Majid).

Khalid Adam, Ismail Hammad and Fakhreldin, Mohammed Adam Ibrahim and Jasni, Mohamad Zain and Mazlina, Abdul Majid (2015) Big Data Analysis and Storage. In: Proceedings of the 2015 International Conference on Operations Excellence and Service Engineering , 10-11 September 2015 , Orlando, Florida, USA. pp. 648-659..

Khalid Hassan, Mohamed Edris (2016) Robust image watermarking techniques using image features. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khalil Mesbah, AbdulJalil (2015) An investigation on user's intention to adopt accounting information system in Libyan small and medium enterprises: an analysis of structural equation modeling. UNSPECIFIED thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khalis, Mokhtar and Hazri Dahalan, Md Razip and Effinizam, Abdul Latip (2019) Operation effect to voltage SAG Immunity Levels of AC Contractors at petrochemical plant in Pahang, Malaysia. AIM, 1796. pp. 1-5. ISSN 2032-9644. (Published)

Khalisah, Abdul Basid (2014) Smart mobile emergency system for paramedic user (SMES). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Khamisa, Abdul Hamid and Wan Azmi, Wan Hamzah and Mohd Yusof, Taib and Mohd Farid, Ismail and Anwar Ilmar, Ramadhan (2022) Rheological properties of TiO2/POE nanolubricant for automotive air conditioning system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (1). pp. 10-22. ISSN 2289-7879. (Published)

Khan, M. F. K. and Rashid, S. S. and Ramli, A. N. M. and Kabir, M. N. and Maziz, M. N. H. (2021) Structural analysis of plasmid-mediated verotoxin gene producing non-o157 escherichia coli using molecular dynamic simulations. Journal of Microbiology, Biotechnology and Food Sciences, 11 (1). pp. 1-7. ISSN 1338-5178. (Published)

Khan, Maksudur R. and Baranitharan, E. and Cheng, C. K. and Yousuf, Abu and Wee, Fei Aaron Teo and Tan, Geok Yuan Annie (2015) Enhanced Power Generation Using Controlled Inoculum From Palm Oil Mill Effluent Fed Microbial Fuel Cell. Fuel, 143. pp. 72-79. ISSN 0016-2361. (Published)

Khan, Md. Nafiul Alam and Miah, M. Saef Ullah and Shahjalal, Md. and Sarwar, Talha and Rokon, Md. Shahariar (2022) Predicting young imposter syndrome using ensemble learning. Complexity, 2022 (8306473). pp. 1-10. ISSN 1076-2787. (Published)

Kharudin, Ali (2017) Lift-off detection system using Error Compensated Eddy Current Testing based on fuzzy logic. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Roshahliza, M Ramli).

Khatun, Fatema (2020) Photocatalytic conversion of carbon dioxide to methane using RGOAu-TNTs. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khatun, Fatema and Azrina, Abd Aziz and A. K. M., Kafi and Sim, Lan Ching (2018) Synthesis and Characterization of TiO2 Nanotube Using Electrochemical Anodization Method. International Journal of Engineering Technology And Sciences (IJETS), 5 (3). pp. 132-139. ISSN 2289-697X. (Published)

Khatun, Fatema and Azrina, Abd Aziz and Sim, Lan Ching and Monir, Minhaj Uddin (2019) Plasmonic enhanced Au decorated TiO2 nanotube arrays as a visible light active catalyst towards photocatalytic CO2 conversion to CH4. Journal of Environmental Chemical Engineering. pp. 1-10. ISSN 2213-3437. (In Press / Online First) (In Press / Online First)

Khatun, Fatema and Monir, Md. Minhaj Uddin and Arham, S. M. Nafefun and Zularisam, A. W. (2016) Implementation of Carbon Dioxide Gas Injection Method for Gas Recovery at Rashidpur Gas Field, Bangladesh. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 52-61. ISSN 2289-697X. (Published)

Khew, Chung Wei and Leong, Kah Hon and Sim, Lanching and Azrina, Abd Aziz and Dai, Chaomeng and Oh, Wen Da and Shaliza, Ibrahim (2023) Sunlight mediated enhanced removal of metoprolol using graphitic carbon nitride (g-C3N4). In: Materials Research Proceedings; International Conference on Sustainable Processes and Clean Energy Transition, ICSuPCET 2022 , 1-2 December 2022 , Kuching. pp. 28-34., 29. ISSN 2474-3941 ISBN 978-164490250-9

Khilji, Irshad Ahamad and Siti Nadiah, Mohd Saffe and Pathak, Sunil and Chilakamarry, Chaitanya Reddy and Amiril Sahab, Abdul Sani and Reddy, Venugopal Jayarama (2022) Facile manufacture of oxide-free Cu particles coated with oleic acid by electrical discharge machining. Micromachines, 13 (6). pp. 1-10. ISSN 2072-666X. (Published)

Khir, Hazim and Pandey, Adarsh Kumar and Saidur, Rahman Md and Muhammad, Shakeel Ahmad and Nasrudin, Abd Rahim and Dewika, M. and Samykano, Mahendran (2022) Recent advancements and challenges in flexible low temperature dye sensitised solar cells. Sustainable Energy Technologies and Assessments, 53 (102745). pp. 1-23. ISSN 2213-1388. (Published)

Kho, Yap Bing and Abid, Hussanan and Norhafizah, Md Sarif and Zulkhibri, Ismail and Mohd Zuki, Salleh (2018) Thermal radiation effects on mhd with flow heat and mass transfer in casson nanofluid over a stretching sheet. In: MATEC Web of Conferences, Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-6., 150. ISSN 2261236X (online)

Kho, Yap Bing and Rahimah, Jusoh and Mohd Zuki, Salleh and Mohd Hisyam, Mohd Ariff and Zulkhibri, Ismail (2021) Heat transfer and flow analysis of hybrid nanofluid with vicsous dissipation impact. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Khoo, Jun Li and Radhiyah, Abd Aziz (2021) Callophyllum Inophyllum shell derived of activated carbon for additive of machining lubricant. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1868-1872., 48 (6). ISSN 2214-7853

Khoo, Kok Hong (2014) Online dental management system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Khoo, Yingsiew and Nadiene Salleha, Mohd Nawi and Liang, Yong Yeow and Sim, Ling Kai and Lau, Woei Jye and Thamaraiselvan, Chidambaram (2024) Surface modification of NF membrane via an environmentally friendly and rapid approach for desalination Process: performance and stability evaluation. Separation and Purification Technology, 329 (125119). pp. 1-9. ISSN 1383-5866. (Published)

Khor, Ai Chia (2021) Characterization of negative electrolyte– alizarin red s and positive electrode felt for organic redox flow battery application. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamed, Mohd Rusllim).

Khudhur, Ahmed Mahmood (2018) Optimization and improvement of hodgkin-huxley model under the influence of ion channel noise in neurons. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khudhur, Ahmed Mahmood and Abdalla, Ahmed N. (2015) A New Neuron Ion Channel Model with Noisy Input Current. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

Kiethson, Branden Adems and Mohd Khairuddin, Ismail and Anwar P. P., Abdul Majeed and Mohd Razman, Mohd Azraai and Abdullah, Muhammad Amirul and Mohd Isa, Wan Hasbullah (2022) Artificial intelligence approach for fire monitoring and warning system design. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 58-63. ISSN 2637-0883. (Published)

Kim, Kate and Hourfar, Farzad and Abdul Halim, Abdul Razik and Rizwan, Muhammad and Almansoori, Ali and Fowler, Michael W. and Elkamel, Ali (2023) Importance of microalgae and municipal waste in bioenergy products hierarchy—integration of biorefineries for microalgae and municipal waste processing : A review. Energies, 16 (6361). pp. 1-39. ISSN 1996-1073. (Published)

King, Sze Soon and Rahimi, A. Rahman and Muhammad Ashraf, Fauzi and Ahmad Tarmizi, Haron (2022) Critical analysis of pandemic impact on AEC organizations: The covid-19 case. Journal of Engineering, Design and Technology, 20 (1). pp. 358-383. ISSN 1726-0531. (Published)

Kirpichnikova, I.M. and Sudhakar, K. and Makhsumov, I.B. and Martyanov, A.S. and ShanmugaPriya, S. (2022) Thermal model of a photovoltaic module with heat-protective film. Case Studies in Thermal Engineering, 30. pp. 1-10. ISSN 2214-157X. (Published)

Kirushna Moorthi, Jeevithan and Duraisamy, Youventharan and Rokiah, Othman and Mohd Arif, Sulaiman (2021) Innovative ballast replacement material (IBRM) in-line with geo-technology pillar of IR4.0 in construction. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Kishore, Dokala Janandra Krishna and Mohd Rusllim, Mohamed and Sudhakar, Kumarasamy and Peddakapu, kurukuri (2023) A new meta‑heuristic optimization‑based MPPT control technique for green energy harvesting from photovoltaic systems under different atmospheric conditions. Environmental Science and Pollution Research, 30. pp. 84167-84182. ISSN 1614-7499. (Published)

Kit, Tam Jun and Sarah ‘Atifah, Saruchi and Nurhaffizah, Hassan and Nor Aziyatul, Izni (2023) Cyclist fall detection system via the internet of things (IoT). International Journal of Computing and Digital Systems, 13 (1). pp. 1025-1033. ISSN 2210-142X. (Published)

Kiung, Siew Lian and Liew, Siau-Chuin (2021) Facial image protection based on watermarking technique. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Koay, Li Woon (2019) Design and development of a wireless indoor smart energy saving and monitoring. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Manap, Hadi).

Kobayashi, Ikkei and Ogawa, Kazuki and Uchino, Daigo and Ikeda, Keigo and Kato, Taro and Endo, Ayato and Mohamad Heerwan, Peeie and Narita, Takayoshi and Kato, Hideaki A basic study on hybrid systems for small race car to improve dynamic performance using lap time simulation. Actuators, 11 (7). pp. 1-17. ISSN 2076-0825. (Published)

Koh, Chai Fong (2017) Development of photocatalyst for CO₂ conversion to hydrocarbon fuel. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Kong, Chung Hwa (2021) Investigation of inclusion casting, sand blasting and embossing methods to prepare engine cylinder bore surface for frictional and wear improvement. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kowsher, Md. and Hossen, Imran and Tahabilder, Anik and Prottasha, Nusrat Jahan and Habib, Kaiser and Zafril Rizal, M Azmi (2021) Support directional shifting vector: A direction based machine learning classifier. Emerging Science Journal, 5 (5). 700 -713. ISSN 2610-9182. (Published)

Krijah, Vatumalai (2022) Performance Analysis Of Dynamic Control In Dual Active Bridge Dc-Dc Converter. College of Engineering, Universiti Malaysia Pahang.

Krishna Kishore, Dokala Janandra and Mohd Rusllim, Mohamed and Sudhakar, Kumarasamy and Peddakapu, kurukuri and D., Anantha koteswara Rao (2022) A hybrid PEO based maximum power point tracking controller for pv system under partial shading conditions. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 63..

Krishnan, S. and Nasrullah, M. and S., Mohamad (2022) Effect of pellet size and adhesive ratio on the production of kenaf pellet as a fossil fuel. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 8 (1). pp. 14-17. ISSN 0126-8139. (Published)

Krishnan, Santhana and Mohd, Nasrullah and Kamyab, Hesam and Noor, Suzana and Mimi Sakinah, Abdul Munaim and Zularisam, Abdul Wahid and Ali, Ismat Hassan and Salehi, Reza and Chaiprapat, Sumate S. (2022) Fouling characteristics and cleaning approach of ultrafiltration membrane during xylose reductase separation. Bioprocess and Biosystems Engineering, 45 (7). pp. 1125-1136. ISSN 1615-7591. (Published)

Krishnan, Santhana and Mohd Fadhil, Md Din and Shazwin, Mat Taib and Yong, Ee Ling and Eeyzah, Aminuddin and Chelliapan, Shreeshivasan and Mishra, Puranjan and Rana, Supriyanka and Mohd Nasrullah, Zulkifli and Mimi Sakinah, A. M. and Zularisam, A. W. and Singh, Lakhveer (2018) Utilization of micro‒algal biomass residues (MABRS) for bio‒hythane production‒ a perspective. Journal of Applied Biotechnology & Bioengineering, 5 (3). pp. 166-169. ISSN 2572-8466. (Published)

Krishnan, Santhana and Singh, Lakhveer and Mimi Sakinah, A. M. and Thakur, Sveta and Mohd, Nasrullah and Otieno, Andrew and Zularisam, A. W. (2017) An Investigation of Two-Stage Thermophilic and Mesophilic Fermentation Process for the Production of Hydrogen and Methane from Palm Oil Mill Effluent. Environmental Progress & Sustainable Energy, 36 (3). pp. 895-902. ISSN 1944-7442 (print); 1944-7450 (online). (Published)

Krishnan, Santhana and Singh, Lakhveer and Mimi Sakinah, A. M. and Thakur, Sveta and Zularisam, A. W. and Alkasrawi, Malek (2016) Process Enhancement of Hydrogen And Methane Production from Palm Oil Mill Effluent Using Two-Stage Thermophilic and Mesophilic Fermentation. International Journal of Hydrogen Energy, 41 (30). pp. 12888-12898. ISSN 0360-3199. (Published)

Ku Muhammad Naim, Ku Khalif and Seng, Woo Chaw and Gegov, Alexander and Ahmad Syafadhli, Abu Bakar and Nur Adibah, Shahrul (2024) Integrated Generative Adversarial Networks and Deep Convolutional Neural Networks for Image Data Classification A Case Study for COVID-19. Information, 15 (1). ISSN 2078-2489. (Published)

Kulkarni, R. R. and Shaikh, Ummid and Chavan, Priyanka (2015) An Experimental Investigation of Free Space Cooling by Phase Change Material (PCM). International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 19-24. ISSN 2289-697X. (Published)

Kumar, Harish and Soh, Ping Jack and Mohd Arfian, Ismail (2022) Big data streaming platforms : A review. Iraqi Journal for Computer Science and Mathematics, 3 (2). pp. 95-100. ISSN 2788-7421. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2016) Bioelectricity Generation and Treatment of Sugar Mill Effluent Using a Microbial Fuel Cell. Journal of Clean Energy Technologies, 4 (4). pp. 249-252. ISSN 1793-821X. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2014) A Comparative Study for Electricity Generation and Wastewater Treatment from Palm Oil Mill Effluent by Microbial Fuel Cell using Different Sizes of Electrodes. International Journal of Engineering Technology And Sciences, 1 (1). pp. 13-15. ISSN 2289-697X. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2017) Enhanced Oxygen Reduction Reaction In Air-Cathode Microbial Fuel Cells Using Flower-Like Co3O4 As An Efficient Cathode Catalyst. International Journal of Hydrogen Energy, 42 (30). pp. 19287-19295. ISSN 0360-3199. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2017) Mesoporous Co3O4 Nanoflakes as an Efficient and Non-Precious Cathode Catalyst for Oxygen Reduction Reaction in Air-Cathode Microbial Fuel Cells. Journal of the Taiwan Institute of Chemical Engineers, 78. pp. 329-336. ISSN 1876-1070. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2014) An Overview on Biological Concept of Microbial Fuel Cells. International Journal of Engineering Technology And Sciences, 2 (1). pp. 1-9. ISSN 2289-697X. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. and Mohd Fadhil, Md Din (2015) Exoelectrogens in Microbial Fuel Cells toward Bioelectricity Generation: A Review. International Journal of Energy Research, 39 (8). pp. 1048-1067. ISSN 0363-907X (print); 1099-114X (online). (Published)

Kumar, Senthil and Aslam, Mohammad (2021) Predicting microfinance loan default. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Kumar, Senthil and Aslam, Mohammad and Nawanir, Gusman and Moshood, Taofeeq Durojaye (2023) Impact evaluation of microfinance: A HEPM perspective. In: E3S Web of Conferences; 2023 Ural Environmental Science Forum on Sustainable Development of Industrial Region, UESF 2023 , 25-28 April 2023 , Chelyabinsk. pp. 1-17., 389 (09035). ISSN 2555-0403

Kumar Awasthi, Mukesh Kumar and Nur Izyan, Wan Azelee and Aizi Nor Mazila, Ramli and Siti Aishah, Rashid and Nor Hasmaliana, Abdul Manas and Dailin, Daniel Joe and Rosli, Md Illias and Rajagopal, Rajinikanth and Chang, Soon Woong and Zhang, Zeng Qiang and Ravindran, Balsubramani (2022) Microbial biotechnology approaches for conversion of pineapple waste in to emerging source of healthy food for sustainable environment. International Journal of Food Microbiology, 373 (109714). pp. 1-14. ISSN 0168-1605. (Published)

Kumaran, Kadirgama and Wan Sharuzi, Wan Harun (2020) The trend of 3D Printing in higher TVET skill level. UMP News . (Unpublished)

Kumaresan, R. and Kananathan, J. and Samykano, M. and Kadirgama, Kumaran and Badadhe, Avinash M. (2023) Parameter influence on the tensile properties of FDM printed PLA/ coconut wood. Journal of Engineering and Technology (JET), 14 (1). pp. 91-99. ISSN 2180-3811. (Published)

Kumaresan, Rajan and Mahendran, Samykano and Kumaran, Kadirgama and Wan Sharuzi, Wan Harun and Rahman, Md. Mustafizur (2022) Fused deposition modeling: process, materials, parameters, properties, and applications. The International Journal of Advanced Manufacturing Technology, 120. pp. 1531-1570. ISSN 1433-3015 (Online); 0268-3768 (Printed). (Published)

Kumutha Naidu, Gunasegran (2019) Intelligent bee hive with honey flow extractor with application of solar panel as power source. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Kunwar, Ria and Izan Izwan, Misnon and Hamdan, Daniyal and Rajan, Jose (2021) Miniature tool for characterization of supercapacitive charge storage. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Kuppusamy, Palaniselvam and Paul Raj, R.S. David and Ilavenil, Soundharrajan and Kaleeswaran, Balasubramanian and Govindan, Natanamurugaraj and Maniam, Gaanty Pragas and Ravikumar, Sivanesan (2015) Evaluation of antihypercholesterolemic effect using Memecylon edule Roxb. ethanolic extract in cholesterol-induced Swiss albino mice. Journal of Acute Medicine, 5 (4). pp. 85-91. ISSN 2211-5587. (Published)

Kurniawan, Tedi and Anwar, M. A. and Oktiani, R. and Ragadhita, R. and Nandiyanto, A. B. D. and Aziz, M. (2019) Influences of solvent types on the formation of graphene in the electrochemical exfoliation method. Materials Physics and Mechanics, 42 (2019). pp. 151-157. ISSN 1605-8119. (Published)

Kurukuri, Peddakapu (2021) Frequency deviations stabilizations in restructured power systems using coordinative controllers. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rusllim, Mohamed).

Kusbiantoro, Andri (2017) 189 pelajar FTK tahun akhir pamer projek penyelidikan. UMP News . (Unpublished)

Kusbiantoro, Andri and Rahimah, Embong and Nasir, Shafiq (2016) Adaptation of Eco-Friendly Approach in the Production of Soluble Pozzolanic Material. In: 8th International Conference on Comparing Design In Nature with Science and Engineering , 13-15 September 2016 , New Forest, United Kingdom. pp. 1-9.. (Unpublished)

Kut Heng, Fred Tham and Noor Azlinna, Azizan and Yeap, Lau Wee (2012) Technical trading systems as crystal balls in reducing risk: The Malaysian stock market. International Business Management, 6 (2). pp. 140-146. ISSN 1993-5250. (Published)

L

L., Sandanamsamy and J., Mogan and K., Rajan and W. S. W., Harun and I., Ishak and F. R. M., Romlay and M., Samykano and K., Kadirgama (2023) Effect of process parameter on tensile properties of FDM printed PLA. Materials Today: Proceedings. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

L. H., Shah and N., Huda and Esmaeili, S. and Walbridge, S. and Gerlich, A. P. (2020) Structural morphology of Al-Mg-Si alloy friction stir welds through tool eccentricity. Materials Letters, 275 (128098). pp. 1-4. ISSN 0167-577X. (Published)

Lahimer, A. A. and K., Sopian and Amir, Abdul Razak and M. H., Ruslan and Alghoul, M. A. (2019) Experimental investigation on the performance of solar chimney for reduction of vehicle cabin soak temperature. Applied Thermal Engineering, 152. 247 - 260. ISSN 1359-4311. (Published)

Lai, Pauline Huey Min (2017) Fire safety practices among residents in Azelia Bukit Banyan, Sungai Petani, Kedah. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lai, Saw Wai (2013) Simulating modelling for improving productivity of rice packaging mill. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Lai, Wui Chung (2016) Mobile application on learning cardiopulmonary resuscitation (L-CPR). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Laila Amera, Aziz and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh (2019) Development on mathematical model of convective boundary layer flow of viscoelastic fluid with microrotation effect under constant wall temperature thermal condition over a bluff body. ASM Science Journal, 12 (S. I. 5). pp. 86-90. ISSN 1823-6782. (Published)

Laili, Zulkepeli (2022) Kolaborasi UMP, MNR dan UMW dalam penyelidikan minyak gris gred makanan. UMP News .

Latifah, Arifin (2020) Sains, teknologi bantu penelitian hukum isu semasa. Berita Harian . pp. 54-55.

Latiff, M. I. A. and Izwan, Ismail and Nuruzzaman, D.M. (2021) Characteristics of six layered Al/Si3N4 functionally graded materials prepared through two-step pressureless sintering process. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8508 -8517. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Lau, Kuen Yao and Noor Zirwatul Ahlam, Naharuddin and Abas, A. F. and Alresheedi, Mohammed Thamer and N. H., Zainol Abidin and Mohd Adzir, Mahdi (2022) Gold-nanoparticles microfiber saturable absorber for mode-locked erbium-doped fiber laser. In: 2022 IEEE 9th International Conference on Photonics, ICP 2022 , 8-10 August 2022 , Kuala Lumpur. pp. 8-9. (183601). ISBN 978-166542766-1

Lau Sze Yii, Betty and Wan Ismail, Wan Muhammad Syafiq and Fatin Nasuha, Yahya and Ruwaida, Abdul Rasid (2019) The effect of operating temperature and equivalence ratio in an entrained flow gasification of EFB. In: Materials Today: Proceedings; 2018 International Conference on Chemical Sciences and Engineering: Advance and New Materials, ICCSE 2018 , 7-8 November 2018 , Melaka. pp. 1373-1381., 19. ISSN 2214-7853

Laupa, Junus (2022) Penyelidik UMP hasilkan inovasi sistem Smart Aqua jamin kualiti air ternakan udang kara berkualiti. Jurnal.my .

Laupa, Junus (2011) Perisian menganggar kos minyak. Utusan Malaysia .

Laupa, Junus (2022) SCAV bas pintar tanpa pemandu inovasi terbaharu UMP. Jurnal.my .

Laupa, Junus (2019) UMP hasil inulin kesihatan. Utusan Online .

Law, Peng Hang (2019) Development of working at height management system based on legislations in Malaysia. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lay, Hui Lian (2018) A study on road safety awareness and practices among secondary school’s students. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Le, Ho Cheong (2011) Current issues of social network services. Bit@FSKKP . pp. 22-23. ISSN 1985-7969 (Unpublished)

Lebcir, Mohamed and Suryanti, Awang and Benziane, Ali (2020) Robust blind watermarking technique against geometric attacks for fingerprint image using DTCWT-DCT. Iraqi Journal of Science, 61 (10). pp. 2715-2739. ISSN 0067-2904. (Published)

Lebcir, Mohamed and Suryanti, Awang and Benziane, Ali (2024) The optimal scaling factor based on Secant Method for image watermarking using the hybrid DTCWT-DCT domain. Iraqi Journal for Computer Science and Mathematics (IJCSM), 5 (1). pp. 237-262. ISSN 2788-7421. (Published)

Lee, Chia Kuang and Noor Azlinna, Azizan (2012) Employers' Right in Set-Off as a Vindication for Non-Payment to the Contractors: A Discussion based on CIDB 2000, PAM 2006 and PWD Form 203(A) Standard Form of Contract. In: Malaysian Technical Universities Conference on Engineering and Technology MUCET2012 , 20-21 November 2012 , Hotel Seri Malaysia, Kangar Perlis. .

Lee, Kim Sim (2009) Improvement of the productivity by increasing customer outputs at cafeteria on campus via simulation method in witness. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Chia Kuang and Davidson, Elizabeth and Liu, Yao (2012) A Planned Behavior-Based Investigation of Knowledge Sharing in Construction Industry. In: International Management and Engineering Conference (EMC 2012) . .

Lee, Chia Kuang and Hasahudin, Hassan and Nurhaizan, Mohd Zainudin (2010) Towards Zero Accidents In Construction Projects : Promoting Hirarc As An Effective Tools To Reduce Accidents. In: 3rd International Graduate Conference On Engineering, Sciences & Humanities (IGCESH 2010) , 02-04 November 2010 , Universiti Teknologi Malaysia Johor Bahru, Johor. pp. 1-3..

Lee, Chia Kuang and Tay, Joo Hui and Liew, Siau-Chuin (2021) Dematel digraph: A decision making tool for project practitioners and researchers during covid-19 pandemic. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Lee, Ho Cheong and Siti Normaziah, Ihsan (2013) Business opportunities arising from cloud computing in information technology industry. Bit@FSKKP . pp. 17-21. ISSN 1985-7969

Lee, Jeng Ye (2016) Fuzzy logic based obstacle avoidance strategy for mobile robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lee, Ji Zhe and Anwar P. P., Abdul Majeed (2021) Classification of skin cancer by means of transfer learning models. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 77-81. ISSN 2637-0883. (Published)

Lee, Jing Yue (2018) Rainfall induced residual soil slope instability : building cracked and slope failure. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lee, Khai Loon (2021) Kejayaan PdPR tuntut komitmen semua pihak. Berita Harian .

Lee, Khai Loon and Zhang, Tianyang (2023) Revolutionizing supply chains: Unveiling the power of blockchain technology for enhanced transparency and performance. International Journal on Technology, Innovation, and Management, 3 (1). pp. 19-27. ISSN 2789-777X. (Published)

Lee, Li Fei (2016) The barriers and challenges of ISO 14001 environmental management system implementation in Malaysia industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Lee, Ong Vienna and Heryanto, Ahmad and Mohd Faizal, Ab Razak and Anis Farihan, Mat Raffei and Eh Phon, Danakorn Nincarean and Shahreen, Kasim and Sutikno, Tole (2020) A malicious URLs detection system using optimization and machine learning classifiers. Indonesian Journal of Electrical Engineering and Computer Science, 17 (3). pp. 1210-1214. ISSN 2502-4752. (Published)

Lee, Pei Qi (2016) Phytoremediation of heavy metals and desalination of brackish water with ipomoea aquatica using aquaponics system. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Lee, S. P. and Nurul Hafizah, Mohd Saufi and Ellie Yi Lih, Teo and Chong, Kwok Feng (2023) Phenothiazine-functionalized rgo for electrochemical capacitor. Current Science and Technology (CST). pp. 29-34. ISSN 2785-8804. (Published)

Lee, Shin Yee (2014) Mathematics game following KSSR for primary school student. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lee, Ti Soon (2015) Mana rehab : a game that helps in fine motor skills rehabilitation. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lee, Zhen Ping and Rahimi, A. and Doh, Shu Ing (2020) Critical success factors for implementing design-build: analysing Malaysian Public Projects. Journal of Engineering, Design and Technology. ISSN 1726-0531. (In Press / Online First) (In Press / Online First)

Lee, Zheng Ping (2022) A novel decision support tool for assessing the suitability of design-build method for civil construction projects in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahimi, Abdul Rahman).

Lee, Zheng Ping (2022) A novel decision support tool for assessing the suitability of designbuild method for civil construction projects in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahimi, Abdul Rahman).

Lee, Zheng Ping and Abdul Rahimi, Abdul Rahman and Doh, Shu Ing (2022) Application of decision support tool in design-build projects: A quasi-experiment with novice decision makers. Built Environment Project and Asset Management, ahead-of-pri. pp. 1-19. ISSN 2044-124X. (Published)

Lee May Shian, Helen and Aina Aishah, Maharon and Raja Murfiqah, Raja Mohd Fouzy and Norfazilasari, Yasman and Mohd Zairulnizam, Mohd Zawawi (2022) Fabrication of glass microlens array using laser-assisted contactless hot embossing. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 86..

Leng, Lai Yee and Nor Ilia, Anisa and Nour, Abdurahman Hamid (2023) Influence of the formulated surfactant on the characterization of the base oil. In: Journal of Physics: Conference Series; 18th International Engineering Research Conference 2022, EURECA 2022 , 30 November 2022 , Subang Jaya. pp. 1-11., 2523 (012018). ISSN 1742-6588

Leong, Meng Li (2015) A study of PM₂.₅ emitted from cooking activities in indoor environment. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Leong, Weng Kai (2018) Noise exposure management system based on Factories and Machinery (noise exposure) Regulations 1989. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lestari, Puji Tri and Fernando, Yudi and Ikhsan, Ridho Bramulya and Wahyuni-Td, Ika Sari and Prasarry, Yudhita Valen and Mergeresa, Fineke (2022) A survey on electronic dialogue, risk assessment, customer access, and customers relationship lifetime. In: Proceedings of 2022 International Conference on Information Management and Technology, ICIMTech 2022; 7th International Conference on Information Management and Technology, ICIMTech 2022 , 11-12 August 2022 , Semarang. pp. 100-104. (183707). ISBN 978-166545090-4

Li, Chaochao and Huang, Miansong and Tian, Juncang and Isabella Anak Gisen, Jacqueline (2022) Research and application of the mathematical model for extreme weather event in coastal urban areas. Physics and Chemistry of the Earth, 125 (103075). pp. 1-8. ISSN 1474-7065. (Published)

Li, Jie (2023) Classification of rail defect based on B-type display image using deep learning method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Doh, Shu Ing).

Li, Woon Koay and Naif, Yasir Hashim (2018) Design of a fully wireless indoor smart energy saving and monitoring system. In: 2nd Asia International Multidisciplinary Conference (AIMC 2018) , 11-13 May 2018 , Universiti Teknologi Malaysia, Johor Bharu, Malaysia. pp. 1-9.. (Unpublished)

Li, Woon Koay and Naif, Yasir Hashim (2017) A review on indoor smart energy managemet system. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-16. ISSN 2289-697X. (Published)

Li, Xiaofeng and Doh, Shu Ing and Ho, Chia Min and Mohammad I, AlBiajawi (2022) Durability properties of mortar containing steel slag as supplementary cementitious material. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 67..

Liaw, Hui Kim (2014) Kindergarten management system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Liew, Chin Seng and Wong, Chung Yiin and Abdelfattah, Eman A. and Raksasat, Ratchaprapa and Rawindran, Hemamalini and Lim, Jun Wei and Kiatkittipong, Worapon and Kiatkittipong, Kunlanan and Mohamad, Mardawani and Yek, Peter Nai Yuh and Herma Dina, Setiabudi and Chin, Kui Cheng and Lam, Su Shiung (2022) Fungal fermented palm kernel expeller as feed for black soldier fly larvae in producing protein and biodiesel. Journals of Fungi, 8 (4). pp. 1-12. ISSN 2309-608X. (Published)

Liew, Nicole Siaw Ing and Ng, C.M. and Nur Syamimi Nabilah, Mohd Sori and Ramadhansyah, Putra Jaya and Khairil Azman, Masri (2022) Influence of aggregates shape on porous asphalt mixture. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 112..

Liew, Yu Xuan and Chin, Siew Choo and Goh, Hui Jun and Siti Asmahani, Saad and Gimbun, Jolius (2023) Improvement of pozzolanic properties of oil palm boiler ash through heat treatment. In: E3S Web of Conferences; 2023 5th International Conference on Resources and Environment Sciences, ICRES 2023 , 9-11 June 2023 , Bangkok. pp. 1-8., 422 (01005). ISSN 2555-0403

Liew Siaw Ing, Nicole and Putra Jaya, Ramadhansyah and Khairil Azman, Masri and Noram Irwan, Ramli and Mohamad Idris, Ali (2021) Seashell porous asphalt – Sustainable road construction. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Lik Yang, Ooi and Fatin Arinah, Hanafi and Chin, Mei Lee (2021) Eco-friendly biofertilizer from rice straw waste. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Liliana, Azmi (2014) Online appointment system for FSKKP (OASF). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lim, Jun Wei and Tan, Da Hui and Azrina, Abd Aziz and Singh, Lakhveer and Khodapanah, Nasrin (2022) Development of carbon nanotubes (CNTs) membrane from waste plastic: Towards waste to wealth for water treatment. In: Materials Science Forum; 3rd Postgraduate Symposium on Industrial Science and Technology, SISTEC 2021 , 25 - 26 August 2021 , Virtual, Online. pp. 143-149., 1056. ISSN 0255-5476

Lim, Kar Sing and Siti Nur Afifah, Azraai and Nordin, Yahaya and Zardasti, Libriati and Norhazilan, Md Noor (2017) Strength Development of Epoxy Grouts for Pipeline Rehabilitation. Jurnal Teknologi (Sciences and Engineering), 79 (1). pp. 9-14. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Lim, Say Choon (2015) Helper system for managing Alzheimer's people using mobile application. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lim, Sheh Hong (2021) Computational study of hemodynamics analysis between mri measurement and cfd simulation on segmented patient-specific cerebral aneurysm model. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Adib, Mohd Azrul Hisham).

Lim, Sheh Hong and Mohd Azrul Hisham, Mohd Adib and Mohd Shafie, Abdullah and Radhiana, Hassan (2020) Qualitative and quantitative comparison of hemodynamics between MRI Measurement and CFD Simulation on Patientspecific Cerebral Aneurysm - A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (2). pp. 112-123. ISSN 2289-7879. (Published)

Lim, Syh Kai and Ahmad Razlan, Yusoff (2023) Effects of Hybrid Nanocooling-Lubricants MQCL on Machining Temperature and Tool Wear Mechanisms under Turning Process of Titanium Alloy. Tribology Online, 18 (6). pp. 385-395. ISSN 1881-218X(Printed) 1881-2198 (Online). (Published)

Lim, Wan Sin and Chong, Kwok Feng (2020) Study on Modified Hummers Method for Partially Oxidized Graphene Oxide Synthesis. Materials Science Forum, 981. pp. 23-28. (Published)

Lim, Wee Sheng and Ahmad Fakhri, Ab. Nasir and Mohd Azraai, Mohd Razman and Anwar P. P., Abdul Majeed and Nur Shazwani, Kamarudin and Muhammad Zulfahmi Toh, Abdullah (2021) Traffic sign classification using transfer learning: An investigation of feature-combining model. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 37-41. ISSN 2637-0883. (Published)

Lim, Wei Jie and Normaniha, Abd Ghani (2022) Covid-19 mandatory self-quarantine wearable device for authority monitoring with edge ai reporting & flagging system. Health and Technology, 12. pp. 215-226. ISSN 2190-7188 (printed), 2190-7196(Online). (Published)

Ling, Jin Kiong (2019) Synthesis and characterization of Al2O3-SnO2 composite nanofibers by electrospinning for dye-sensitized solar cells. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ling, Jin Kiong and Jose, Rajan (2021) Electrospun SnO2-CuO semiconductor composite nanofibers and its electrochemical properties. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1631-1634., 46 (Part 4). ISSN 2214-7853

Ling, Jin Kiong and Karuppiah, Chelladurai and Das, Santanu and Izan Izwan, Misnon and Mohd Hasbi, Ab. Rahim and Yang, Chun-Chen and Jose, Rajan (2022) Electrospun ternary composite metal oxide fibers as an anode for lithium-ion batteries. Frontiers in Materials, 9 (815204). pp. 1-10. ISSN 2296-8016. (Published)

Ling, Michael Chee Siang (2015) Multi-users workstations. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Liu, Xiaojun and Daigo, Uchino and Ikeda, Keigo and Endo, Ayato and Mohamad Heerwan, Peeie and Narita, Takayoshi and Kato, Hideaki (2018) Driving assist system for ultra-compact EVs-fundamental consideration of muscle burden owing to differences in the drivers' physiques. Actuators, 7 (3). pp. 1-10. ISSN 2076-0825. (Published)

Liu, Xinni (2021) Enhanced faster region-based convolutional neural network for oil palm tree detection. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Logenthiran, Machap and Kohbalan, Moorthy (2022) Survival analysis for the identified cancer gene subtype from the co-clustering algorithm. In: International Conference on Electrical, Computer, and Energy Technologies, ICECET 2022 , 20-22 July 2022 , Prague-Czech Republic. pp. 1-6. (182630). ISBN 978-166547087-2

Loh, Kha Bee (2014) Test case generator based on UML activity diagram. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Lovely, Afroza Khanam and Fatimah, Mahmud and M. H., Rohaya (2015) Determination of the Harvesting factors of Independent Smallholder Oil Palm Estate. Journal of Advanced & Applied Sciences (JAAS), 3 (4). pp. 136-144. ISSN 2289-6260. (Published)

Low, Ching Chuan (2014) Emergency medical service mobile application for emergency, radiology, and pathology departments in hospital Pekan. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Low, Jooyee and Khe, Chengseong and Usman, Fahad and Yarima, Mudassir Hassan and Lai, Chin Wei and You, Kok Yeow and Lim, Jun Wei and Khoo, Kuan Shiong (2024) Review on demulsification techniques for oil/water emulsion : Comparison of recyclable and irretrievable approaches. Environmental Research, 243 (117840). pp. 1-23. ISSN 0013-9351. (Published)

Luqman, Abdul Halim and Firdaus, Basrawi and Ahmmad Shukrie, Md Yudin and Siti Norazualina, Faizal (2020) Fluidized bed drying of stingless bee pot-pollen: performance of swirling distributor. In: Symposium on Energy Systems (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-6., 863. ISSN 1757-8981 (Print); 1757-899X (Online)

Luqman, Abdul Halim and Firdaus, Basrawi and Mohd Yusof, Taib and Mohd Hazwan, Yusof and Zulkifli, Mustafa and Thamir K., Ibrahim (2020) A preliminary study on new cooling techniques for stingless bees hive. In: Symposium on Energy Systems (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-8., 863. ISSN 1757-8981 (Print); 1757-899X (Online)

Luqman, Abdul Halim and Firdaus, Basrawi and Siti Norazualina, Faizal and Ahmmad Shukrie, Md Yudin and Mohd Yusof, Taib (2020) Effect of superficial air velocity on the fluidized bed drying performance of stingless bee pot-pollen. In: Symposium on Energy Systems (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-5., 863. ISSN 1757-8981 (Print); 1757-899X (Online)

Luqman, Abdul Halim and Mohamad Firdaus, Basrawi and Azizuddin, Abd Aziz and Zulkifli, Mustafa and Oumer, A. N. and Ahmad Syazwan, Ramli (2017) A new cooling technique for stingless bees hive. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2017 (SES 2017) , 26-27 September 2017 , Perak, Malaysia. pp. 1-6., 131 (03013). ISSN 2261236X

Luqman Hakim, Ahmad Shah and Hou, Wentao and Razmpoosh, Mohammad Hadi and Walbridge, Scott S. and Gerlich, Adrian P. (2022) Strain rate and microtexture analysis of rapid-quenched AA6061 friction stir welds produced with tool eccentricity. Journal of Materials Research and Technology, 21. pp. 1434-1441. ISSN 2238-7854. (Published)

Lye, Lim Chong and Kamarul Arifin, Ahmad and Ahmedov, Anvarjon A. and Nor Mariah, Adam (2017) Derivation of three-dimensional heat transfer mathematical equations to predict conductivity of insulation systems for liquid nitrogen pipe flow. Journal of Mechanical Engineering, S1 2 (1). pp. 39-56. ISSN 1823-5514 (print); 2550-164X (online). (Published)

M

M A, Azmi and Nadiah, Mokhtar and N F, Shoparwe and H, Shukor (2021) Biosorption of CU(II) Ions by Leucaena Leucocephala Leave from Aqueous Solution. IOP Conference Series: Earth and Environmental Science, 765 (012032). pp. 1-11. ISSN 1755-1315. (Published)

M Arif, Abdullah and Mohd Fadzil Faisae, Ab Rashid and Zakri, Ghazalli and Nik Zuki, Nik Mohamed and Ahmad Nasser, Mohd Rose (2018) Modelling of assembly sequence planning problem using base part concept. AIP Publishing. pp. 200131-200135. ISSN 978-0-7354-1752-6. (Published)

M., Faris and Fadhlur Rahman, Mohd Romlay and Akhtar Razul, Razali and M. R., Hanifah and A., Ghazali (2022) Electric vehicle drive specification modelling for three wheels scooter configuration. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 85-95., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

M., Fuad and Ernawan, Ferda and Hui, L. J. (2021) Video scene change detection based on histogram analysis for hiding message. In: Journal of Physics: Conference Series; 7th International Conference on Mathematics, Science, and Education 2020, ICMSE 2020 , 6 October 2020 , Semarang, Virtual. pp. 1-8., 1918 (4). ISSN 1742-6588 (print); 1742-6596 (online)

M., Hussein Adnan and R. A., Bakar and K., Kadirgama and K. V., Sharma (2016) Heat Transfer Enhancement with Elliptical Tube Under Turbulent Flow Tio2-Water Nanofluid. Thermal Science, 20 (1). pp. 89-97. ISSN 2334-7163. (Published)

M., Ishak and L. H., Shah (2014) Review of Research Progress on Aluminum-Steel Dissimilar Welding. Materials and Manufacturing Processes. pp. 1-24. ISSN 1042-6914 (print); 1532-2475 (online). (Published)

M., Ishak and M. Rafiqul, Islam (2014) Weldability of A7075-T651 and AZ31B Dissimilar Alloys by MIG Welding Method Based on Welding Appearances. Journal of Physics: Conference series, 495. pp. 1-8. ISSN 1742-6588 (print); 1742-6596 (online). (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and L. H., Shah (2015) Parametric Studies on Tensile Strength in Joining AA6061-T6 and AA7075-T6 by Gas Metal Arc Welding Process. IOP Conference Series: Materials Science and Engineering, 100 (012042). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Kaviya and P., Ramakrishnan and S. B., Mohamed and R., Ramakrishnan and J., Gimbun and K. M., Veerabadran and M. R., Kuppusamy and K., Kaviyarasu and T. M., Sridhar (2021) Synthesis and characterization of nano-hydroxyapatite/graphene oxide composite materials for medical implant coating applications. In: Materials Today: Proceedings, NANOSMATAFRICA-2018 , 19-23 November 2018 , CapeTown, South Africa. pp. 204-207., 36 (Part 2). ISSN 2214-7853

M., Khan and S. A., Ali-Elhussain and T., Ghous and F., Kormin and A., Ajit and T., Ahmad and M. K., Muhammadi and T., Batool and F., Akhtar and I., Ahmed and A. Z., Sulaiman (2018) Assessment of in-vitro antioxidant capacity and polyphenolic composition of frequently used legumes. In: 4th International Conference of Chemical Engineering & Industrial Biotechnology , 1-2 August 2018 , Seri Pacific Hotel Kuala Lumpur. pp. 1-18.. (Unpublished)

M., Sandhya and D., Ramasamy and K., Kadirgama and W. S. W., Harun and M., Samykano and A., Ameer (2021) Enhancement of tribological behaviour and thermophysical properties of engine oil lubricant by Graphene/Co-Cr nanoparticle additives for preparation of stable nanolubricant. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-10., 1078 (012016). ISSN 1757-899X

M. A., Ameedeen (2011) Main frame in our midst. Bit@FSKKP . p. 8. ISSN 1985-7969 (Unpublished)

M. A., Ameedeen and Bordbar, Behzad (2012) A Case Analysis of IEEE 802.11 CSMACA Protocol Via Sequence Diagrams. In: Fourth International Conference on Computational Intelligence, Modelling and Simulation , 25-27 September 2012 , Kuantan, Pahang. pp. 347-351.. ISSN 2166-8531 ISBN 978-1-4673-3113-5

M. A., Saadiah and Nour, Abdurahman Hamid and Rosli, Mohd Yunus (2021) Synthesis, characterization, and demulsification of water in crude oil emulsion via a corn oil-based demulsifier. Materials Today: Proceedings, 42 (Part 1). pp. 251-258. ISSN 2214-7853. (Published)

M. A., Seman and S. M., Syed Mohsin and A. M. A., Zaidi and Z. M., Jaini (2022) Numerical investigation on reduced moment resistance and increased reinforcement spacing in reinforced concrete wall subjected to blast load. International Journal of Integrated Engineering, 14 (1). pp. 353-362. ISSN 2229-838X. (Published)

M. A., Seman and Sharifah Maszura, Syed Mohsin and A.M.A., Zaidi and Z. M., Jaini (2022) Numerical investigation on reduced moment resistance and increased reinforcement spacing in reinforced concrete wall subjected to blast load. International Journal of Integrated Engineering, 14 (1). pp. 353-362. ISSN 2229-838X. (Published)

M. A. M, Abdullah and M. S., Man and Syamsul. Bahari, Abdullah and Syed Mohd Saufi, Tuan Chik (2020) Synthesis and characterization of thermo-responsive ionic liquids (TRILs). In: UNSPECIFIED . , 736. ISSN 1757-899X

M. Amirul, Islam and Ahasanul, Karim and Puranjan, Mishra and C. K. M., Faizal and Khan, Maksudur R. and Abu, Yousuf (2019) Role of biocatalyst in microbial fuel cell performance. In: Waste to Sustainable Energy MFCs – Prospects through Prognosis. CRC Press, Boca Raton, Florida, pp. 86-87. ISBN 9781138328211 (hbk.); 9780429448799 (online)

M. F., Abas (2007) PCB Design & Fabrication For Begineers. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang. ISBN 978-967-42632-2-8

M. F., Md Jaafar and H., Mohd Saman and M. N., Muhd Sidek and K., Muthusamy and N., Ismail (2021) Performance of nano metaclay on chloride diffusion for ultra- high performance concrete. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682 (012002). ISSN 1755-1307

M. F., Nabil and Azmi, W. H. and Abdul Hamid, K. and R., Mamat (2018) Experimental investigation of heat transfer and friction factor of TiO2-SiO2 nanofluids in water:ethylene glycol mixture. International Journal of Heat and Mass Transfer, 124. pp. 1361-1369. ISSN 0017-9310. (Published)

M. F. M., Jusof and S., Mohammad and A. A. A., Razak and N. A. M., Rizal and A. N. K., Nasir and M. A., Ahmad (2022) Hybrid manta ray foraging—particle swarm algorithm for PD control optimization of an inverted pendulum. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-13., 730. ISBN 978-981334596-6

M. F. M., Yusof and M., Ishak and M. F., Ghazali (2017) Feasibility of using acoustic method in monitoring the penetration status during the Pulse Mode Laser Welding process. In: IOP Conference Series: Materials Science and Engineering: Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-9., 238 (012006). ISSN 1757-899X

M. H., Mohd Zaki and S. R. A., Idris (2023) A simulation study on interfacial reaction between Sn3Ag0.5Cu and Sn0.7Cu using different substrates after reflow soldering. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 815-824.. ISSN 2195-4356 ISBN 978-981-19-1456-0

M. I., Adiyanto and Majid, Taksiah A. and Fadzli, Mohamed Nazri (2017) Nonstructural Damages of Reinforced Concrete Buildings Due to 2015 Ranau Earthquake. In: AIP Conference Proceedings: Proceeding of the 3rd International Conference of Global Network for Innovative Technology 2016 (3rd IGNITE-2016) , 27-29 January 2016 , Penang, Malaysia. pp. 1-6., 1865 (090002). ISBN 978-0-7354-1545-4

M. I., Adiyanto and Nur Hazwani, Mohd Rashid and Syed Abdul Haris, Syed Mustapa and Noram Irwan, Ramli (2019) Comparison on total weight of steel reinforcement for 5 story reinforced concrete building with and without seismic design. In: Proceedings of AICCE'19: AWAM International Conference on Civil Engineering , 21-22 August 2019 , Penang, Malaysia. pp. 685-694., 53. ISBN 978-3-030-32816-0

M. K. K., Fazlul and Rashid, Shah Samiur and Aizi Nor Mazila, Ramli and Ukaegbu, Chinonso Ishmael and M. H. M., Nazmul (2019) Detection of ESBL and MBL in Acinetobacter spp. and their plasmid profile analysis. Jordan Journal of Biological Sciences, 12 (3). pp. 373-378. ISSN 2307-7166. (Published)

M. K. K., Fazlul and S.P, Deepthi and Mohammed, Irfan and Farzana, Y. and Munira, B. and M.H.M, Nazmul (2019) Antibacterial and antifungal activity of various extracts of Bacopa monnieri. International Journal of Pharmaceutical Research, 11 (1). pp. 1698-1702. ISSN 09752366. (Published)

M. M., Noor and K., Kadirgama and M. M., Rahman (2010) Analysis of Auto Car Jack. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 MAY 2010 , Universiti Malaysia Pahang. .

M. M., Noor and K., Kadirgama and Aidy, Ali and M. M., Rahman and Z., Ghazalli (2009) Prediction of End-of-Life Strategies for Household Equipments Using Artificial Intelligent. American Journal of Applied Sciences, 6 (10). pp. 1838-1844. ISSN 1546-9239 (print); 1554-3641 (online). (Published)

M. M.I., Mohd and Mohd Shafie, Bakar and Mohd Shawal, Jadin (2022) A simulation study of wireless power transfer for electric vehicle. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 305-316., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4

M. N., Mat Hassan and Norhidayah, Abdull (2013) Assessment of Freshwater Quality in Endau Area. International Journal of Technology Management, 2. pp. 73-83. ISSN 2289-2753. (Published)

M. N. M., Salleh and M., Ishak and M. M., Quazi and Aiman, Mohd Halil (2018) Microstructure, mechanical, and failure characteristics of laser-microwelded AZ31B Mg alloy optimized by response surface methodology. The International Journal of Advanced Manufacturing Technology, 9 (1-4). pp. 985-1001. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

M. R., Abdul Hamid and Zainol, Mustafa and Nur Riza, Mohd Suradi and Fazli, Idris and Mokhtar, Abdullah and Abdullah, Ibrahim (2011) Value-Based Performance Excellence Model: Case Studies at Malaysian Technical Universities. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 628-633. ISSN 1991-8178. (Published)

M. R. A., Mohd Reduan and Z., Zulkfli and Zamzuri, Hamedon and Fatchurrohman, Nanang (2022) Effect of Tool Shoulder-to-Pin Diameter Ratio (D/d) on the Mechanical Properties of Friction Stir Processed Mg-Micro Al2O3 Composite. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10103-10111. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. Rahim, Uddin and Khan, Maksudur R. and Md. Wasikur, Rahman and Cheng, C. K. and Yousuf, Abu (2015) Photocatalytic Conversion of CO2 into Methanol: Significant Enhancement of the Methanol Yield over Bi2S3/CdS Photocatalyst. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-5. ISSN 2289-697X. (Published)

M. S., Najib (2013) Teknologi Pengesanan Bau Secara Saintifik. CREATE . p. 64. ISSN 1823-7487

M. S., Norhidayah and A., Norhidayah (2015) Physiological and Psychological Effects on Heat Acclimatization in Extreme Hot Environment. International Journal of Advances in Science Engineering and Technology, 3 (1). pp. 46-52. ISSN 2321-9009. (Published)

M. S., Norhidayah and N. M. Zuki, N. M. and Muhamad Arifpin, Mansor and Ahmad Rasdan, Ismail (2016) A Study of Postural Loading in Malaysian Mining Industry using Rapid Entire Body Assessment. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-4., 74 (00014). ISSN 2261-236X

M. S., Shaari and A. K., Ariffin and Takahashi, Akiyuki and S., Abdullah and Kikuchi, Masanori and M. R. M., Akramin (2017) Fatigue Crack Growth Analysis On Square Prismatic With Embedded Cracks Under Tension Loading. Journal of Mechanical Engineering and Sciences (JMES) , 11 (1). pp. 2511-2525. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. S. I., Zaini and Mohd Fakhrurrazi, Ishak and Muhammad Farhan, Zolkepli (2019) Forensic assessment on landfills leachate through electrical resistivity imaging at Simpang Renggam in Johor, Malaysia. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Green Civil and Environmental Engineering , 4-6 September 2019 , Malang, East Java, Indonesia. pp. 1-11., 669 (012005). ISSN 1757-899X

M.A.M., Jamil and M. Y., Abu and S.N.A.M., Zaini and N.H., Aris and Pinueh, N.S. and W.Z.A.W., Muhamad and F., Ramlie and N., Harudin and E., Sari and Nadiatul Adilah, Ahmad Abdul Ghani and Nur Najmiyah, Jaafar (2023) Application of Mahalanobis-Taguchi System in rainfall trends at UMP Gambang Campus. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (2). pp. 17-24. ISSN 2637-0883. (Published)

M.K.A., Mohamed and Nor Aida Zuraimi, Md Noar and Mohd Zuki, Salleh and A., Ishak (2015) Stagnation Point Flow Past a Stretching Sheet in a Nanofluid with Slip Condition. AIP Conference Proceedings, 1643. pp. 635-641. (Published)

MUHAMMAD ZUFLI, ZUHARI (2023) Inspire@Projek Pintar melabuhkan tirainya dengan membentuk semangat motivasi murid yang tinggi. UMPSA News .

Ma, Quanjin and Ge, Jia and Mohd Ruzaimi, Mat Rejab and Sun, Bo and Ding, Yajun and Nie, Xiaohan and Pang, Hao (2021) Fabrication of the carbon fiber reinforced plastic (CFRP) cone tube through the laboratory-scale 3-axis winding machine. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1645-1651., 46 (Part 4). ISSN 2214-7853

Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Kumar, A. Praveen and Zhang, Bo and Sun, Bo and Mohamad Nazirul Mubin, Merzuki (2021) Free vibration analysis of two novel spherical-roof contoured cores (SRCC): A numerical study. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1775-1782., 48 (Part 6). ISSN 2214-7853

Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Mohammad, Azeem and Mat Sahat, Idris and M.F., Rani and Kumar, A.Praveen (2023) Axial and radial crushing behaviour of thin-walled carbon fiber-reinforced polymer tubes fabricated by the real-time winding angle measurement system. Forces in Mechanics, 10 (100170). pp. 1-10. ISSN 2666;3597. (Published)

Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Song, Yiheng and Zhang, Xin and Hanon, Muammel M. and M. H., Abdullah and Kumar, A. Praveen (2024) Effect of infill pattern of polylactide acid (PLA) 3D-printed integral sandwich panels under ballistic impact loading. Materials Today Communications, 38 (107626). pp. 1-6. ISSN 2352-4928. (Published)

Madkour, Dina M. and Mohd Ibrahim, Shapiai and Shaza Eva, Mohamad and Aly, Hesham Hamdy and Zool Hilmi, Ismail and Mohd Zamri, Ibrahim (2023) A systematic review of deep learning microalgae classification and detection. IEEE Access, 11. pp. 57529-57555. ISSN 2169-3536. (Published)

Mahadi, Bahari and Aishah, Abdul Jalil and Che Rozid, Mamat and Nurul Sahida, Hassan and Herma Dina, Setiabudi and Vo, Dai Viet N. (2022) Insight into the development of silica-based materials as photocatalysts for CO2 photoconversion towards CH3OH : A review and recent progress. Surfaces and Interfaces, 31 (102049). pp. 1-20. ISSN 2468-0230. (Published)

Mahadi, Bahari and Syahida Nasuha, Bukhari and Jun, L.N. and Herma Dina, Setiabudi (2019) Development of fibrous mesoporous silica for catalytic reaction : A short review. In: Materials Today: Proceedings; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur. pp. 33-38., 42 (1). ISSN 2214-7853

Mahadi B., Bahari and Che Rozid, Mamat and Aishah, Abdul Jalil and Siang, Tan Ji and Nurul Sahida, Hassan and Nur Farahain, Khusnun and Walid, Nabgan and Nurul Asmawati, Roslan and Sumaiya Zainal, Zainal Abidin and Herma Dina, Setiabudi and Vo, Dai Viet N. (2022) Cobalt-based catalysts for hydrogen production by thermochemical valorization of glycerol: a review. Environmental Chemistry Letters, 20 (4). pp. 2361-2384. ISSN 1610-3653. (Published)

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Devarajan, Ramasamy (2021) A short review of nano-cellulose preparation from textile spinning waste cotton. In: International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen. pp. 1-7.. ISBN 978-166541224-7

Mahdi, Mazin Mustafa and Thajeel, Ekhlas Mhawi and Abu Zaharin, Ahmad (2022) Simulation of adaptive gain control via 2-D lookup table for isolated hybrid micro-grid system. International Journal of Power Electronics and Drive Systems, 13 (2). pp. 1255-1265. ISSN 2088-8694. (Published)

Mahdi Hishamuddin, Abdul Aziz (2016) UMP squash reservation system using lighting control. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Mahendran, Samykano (2015) Physical and mechanical characterization of electrodeposited nickel nanowires - influence of current density and external magnetic field. PhD thesis, North Carolina A&T State University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mahfuzah, Mustafa and Zarith Liyana, Zahari and Rafiuddin, Abdubrani (2021) Optimal accuracy performance in music-based EEG signal using Matthew correlation coefficient advanced (MCCA). Jurnal Teknologi, 83 (6). pp. 53-61. ISSN 0127-9696. (Published)

Mahmood, Ahmed and Jabbar, Waheb A. and Saad, Wasan Kadhim and Hashim, Yasir and Hadi, Manap (2018) Optimal Nano-Dimensional Channel of GaAs-FinFET Transistor. In: IEEE Student Conference on Research and Development (SCOReD 2019) , 26-28 November 2018 , Selangor, Malaysia. pp. 1-5.. ISBN 978-1-5386-9175-5

Mahmood, M. H. and Maleque, M. A. and Rahman, Md Mustafizur (2022) Hard-hydrophobic nano-CuO coating via electrochemical oxidation for heat transfer performance enhancement. Arabian Journal for Science and Engineering, 47 (5). 6013 -6023. ISSN 2193-567X (Print); 2191-4281 (Online). (Published)

Mahmood, Mahmood H. and Osama, A K and Makky, Essam A. and Mohd Hasbi, Ab. Rahim and Nor Hafizah, Mat Ali and Nur Diana, Hazrudin (2019) Phytochemical screening, antimicrobial and antioxidant efficacy of some plants and their mixture extracts. In: The 2nd international conference on applied biochemistry and biotechnology (ABB 2019) , 21 - 24 Julai 2019 , Macau, China. pp. 1-17.. (Unpublished)

Mahmood, R. A. and Ali, O. M. and Al-Janabi, A. and Al-Doori, G. and M. M., Noor (2021) Review of mechanical vapour compression refrigeration system part 2: performance challenge. International Journal of Applied Mechanics and Engineering, 26 (3). pp. 119-130. ISSN 1734-4492. (Published)

Maizatul Farhain, Ismail and Nurul 'Azyyati, Sabri and Saiful Nizam, Tajuddin and Lee, Chin Mei and Siti Hatijah, Mortan and Ab. Rahim, Mohd-Hairul (2019) Isolation and identification of denitryifing from indegenous mircroorganism. Malaysian Journal Of Biochemistry & Molecular Biology (1). pp. 17-21. ISSN ISSN: 1511-2616, E-ISSN 2600-9005,. (Published)

Makky, Essam A. (2018) Bioethanol production from disposed engine oil management. , [Research Report: Research Report] (Unpublished)

Mamta, Rani and Agarwal, Rashi (2010) Effect of Stochastic Noise on Superior Julia Sets. Journal of Mathematical Imaging and Vision, 36. p. 63. ISSN 0924-9907. (Published)

Manap, Hadi Double guided roller jigsaw tablet (DGTAB). , [Research Report: Research Report] (Unpublished)

Mandal, Ashis Kumar (2016) Partial examination assignment approaches for solving examination timetabling problems. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Maniam, Gaanty Pragas and Ab. Rahim, Mohd Hasbi and Jose, Rajan (2017) Alkaline earth metals loading on waste deoiled-spent bleaching clay as catalysts in transesterification reaction. , [Research Report: Research Report] (Unpublished)

Maniam, Gaanty Pragas and Lee, Keat Teong and Ab. Rahim, Mohd Hasbi Research Acculturation Collaborative Effort (RACE) grant scheme. , [Research Report: Research Report] (Unpublished)

Manpreet Kaur, Paramjit Singh and Mimi Sakinah, A. M. and Zularisam, A. W. (2016) Adsorption Study of Betacyanin on Fibre. In: 18th International Conference on Textile Engineering (ICTE 2016) , 24-25 March 2016 , Miami, USA. pp. 1-8.. ISSN 2010-3778 (In Press / Online First)

Mansor, Sulaiman and Hasan, Ahmad (2017) Zakat klik: pengiraan had kifayah termudah. In: Konvensyen Fiqh & Teknologi 2.0 , 14 & 15 November 2017 , Vistana Hotel, Kuala Lumpur. pp. 1-8.. (Submitted)

Mardilah, Noorazman (2011) Jabatan pembangunan & pengurusan harta transportation management system (JTMS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mariah, Che Mamat (2022) Sulfide removal from petroleum refinery wastewater using hydrogen peroxide and chemically modified activated carbon. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Aziz, Mohd Azoddein).

Marina, Mohamad and Jeefferie, Abd Razak and Noraiham, Mohamad and Sahrim, Haji Ahmad and Ramli, Junid and Puspitasari, Poppy (2020) A short review on polyurethane-based nanocomposites for various applications. In: IOP Conference Series: Materials Science and Engineering; 2020 International Conference on Sustainable Materials, ICoSM 2020 , 3 September 2020 , Pahang, Virtual. pp. 1-8., 957 (012029). ISSN 1757-8981

Marini, C.D. and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2021) Investigation of wear performance of friction stir processed aluminium metal matrix composites. Materials Today: Proceedings, 40 (4). pp. 1740-1744. ISSN 2214-7853. (Published)

Marini, C.D. and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2021) Morphological study of friction stir processed aluminium metal matrix composites. Materials Today: Proceedings, 40 (4). pp. 1745-1748. ISSN 2214-7853. (Published)

Marlina, Yakno and Junita, Mohamad-Saleh and Mohd Zamri, Ibrahim (2022) Dorsal hand vein segmentation using Vein-Generative Adversarial Network (V-GAN) Model. In: Lecture Notes in Electrical Engineering; 11th International Conference on Robotics, Vision, Signal Processing and Power Applications, RoViSP 2021 , 5-6 April 2021 , Virtual, Online. pp. 585-591., 829 LNEE (272139). ISSN 1876-1100 ISBN 978-981168128-8

Marliza, Ismail (2018) Community preparedness towards major accident events in Gebeng Industrial Area, Kuantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Martin, Hii Chun Yeong (2017) A study on the properties of rice husk reinforced bioplastic. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Maryam, Zahaba and Hazrin, Abdul Hadi and Hizrri, Ariffin and Norhidayah, Abdull and Niza, Samsuddin and Mohd Shukri, Mohd Aris (2017) Composition and source determination of heavy metals (HM) in particles in selected primary schools in Pahang. ESTEEM Academic Journal, 13 (Special). pp. 176-184. ISSN 1675-7939 (Print); 2289-4934 (Online). (Published)

Maryam, Zahaba and Rafiqa Azira, M. R. and Noor Faizul, Hadry and N. Norhidayah, A. and Mohd Shukri, M. A. (2015) Indoor Microbial Contamination Through Water Mist Aerosol at Public Restaurants. Jurnal Teknologi (Sciences and Engineering), 77 (24). pp. 45-50. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mas Ida, R.Arifuddin (2016) Perceived of procedural justice in selection system : a case study among the successful candidates in Universiti Malaysia Pahang (UMP). Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Mas Ira Syafila, Mohd Hilmi Tan (2023) Terahertz sensing analysis for early detection of ganoderma boninense disease using near infrared (NIR) spectrometer. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Faizal, Jamlos).

Masni, Mohamad Nor (2017) Mahasiswa UMP timba pengalaman dalam penyediaan minyak wangi berasaskan herba. UMP News . (Unpublished)

Masood, Kamal (2015) A new hybrid multiaxial fatigue life model based on critical plane continuum damage mechanics and genetic algorithm. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Mustafizur, Rahman).

Masyhur, Eko March Handoko and Wan Nursyafiqah, Wan Jusoh and Mohd Noordin, Abu Bakar (2018) Field study to identify river plume extension of Kerian River discharge during neap and spring tide. Bulletin of the Geological Society of Malaysia, 65. pp. 13-18. ISSN 0126-6187. (Published)

Mat Aris, S. and Philip, Dick Carlos and Syed Mohsin, S. M. (2019) Preliminary study on properties of oil palm shell lightweight concrete with cockle shell as mixing ingredient. In: IOP Conference Series: Materials Science and Engineering; Postgraduate Symposium in Civil and Environmental Engineering 2019, PSCEE 2019 , 31 March 2019 , Batu Pahat, Johor. pp. 1-7., 601 (012016). ISSN 1757-8981

Mathur, Priyatrisha and Shih, Jeng-Ywan and Li, Ying-Jeng James and Thirumalraj, Balamurugan and Ramaraj, Sayee Kannan and Jose, Rajan and Karuppiah, Chelladurai and Yang, Chun-Chen (2023) In situ metal organic framework (ZIF-8) and mechanofusion-assisted MWCNT coating of LiFePO/C composite material for lithium-ion batteries. Batteries, 9 (182). pp. 1-19. ISSN 2313-0105. (Published)

Mawarnie, Ismail and Mohd Ruzaimi, Mat Rejab and Siregar, Januar Parlaungan and Zalinawati, Mohamad and Quanjin, Ma and Mohammed, A. A. (2020) Mechanical properties of hybrid glass fiber/rice husk reinforced polymer composite. In: Materials Today: Proceedings; 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020 , 6 - 7 March 2020 , Hyderabad, India. pp. 1749-1755., 27 (161490). ISSN 2214-7853

Mazita, Mokhtar and Noor Azlinna, Azizan and Ida Rizyani, Tahir and Shariman, Mustafa (2014) Organizational Innovativeness Among SMEs in Malaysia Halal Industry. In: Proceedings of the 1st ASEAN Regional Conference on Animal Production (1st ARCAP) & the 35th Annual Conference of Malaysian Society of Animal Production , 4-6 June 2014 , Kuching, Sarawak. pp. 49-50..

Mazita, Mokhtar and Noor Azlinna, Azizan (2016) The Important of Leadership In Confirming The Success of Herbal Industries In Malaysia. In: 1st International Conference On Advanced Business& Social Science(ICABSS-2016) , 27-30 January 2016 , Kuta, Bali. . (Unpublished)

Mazita, Mokhtar and Wan Khairul Anuar, Wan Abdul Manan and Ida Rizyani, Tahir and Azizan, Azit and Siti Maryam Shaidatul, Khamdi (2018) Determinant Factors of Total Quality Management (TQM) and Human Capital Management (HCM) for Product Quality Improvement in Herbal Industry in Malaysia. International Journal of Management and Applied Science (IJMAS), 4 (11). pp. 5-7. ISSN 2394-7926. (Published)

Maziyah, Mat Noh and Hamzah, Ahmad and Nur Aqilah, Othman and Pebrianti, Dwi and Herdawatie, Abdul Kadir (2022) Robust nonlinear liquid level control of a coupled-tank system using backstepping integral sliding mode control. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 665-677., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4

Maziyah, Mat Noh and Mohd Rizal, Arshad and Rosmiwati, Mohd Mokhtar (2022) Robust nonlinear control of a buoyancy-driven airship system using backstepping integral sliding mode control. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 171-189., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6

Mazlina, Abdul Majid and Aickelin, Uwe and Siebers, Peer-Olaf (2009) Comparing Simulation Output Accuracy of Discrete Event and Agent Based Models: A Quantitative Approach. In: Proceedings of the Summer Computer Simulation Conference (SCSC 2009) , 13-16 July 2009 , Istanbul, Turkey. pp. 177-184..

Mazlina, Abdul Majid and Aickelin, Uwe and Siebers, Peer-Olaf (2007) Human Behaviour Modelling For Discrete Event And Agent Based Simulation: A Case Study. In: Annual Operational Research Conference 49 (OR 49) , 2007 , Edinburgh, UK. . (Unpublished)

Mazlina, Abdul Majid and Aickelin, Uwe and Siebers, Peer-Olaf (2009) Investigating Output Accuracy For A Discrete Event Simulation Model And An Agent Based Simulation Model. In: Proceedings of the INFORMS Simulation Society Research Workshop , 25-27 June 2009 , Warwick, UK. pp. 101-105..

Mazlina, Abdul Majid and Aickelin, Uwe and Siebers, Peer-Olaf (2008) Modelling and Analysing Human Behaviour in a Department Store using Discrete Event and Agent Based Simulation. In: Annual Operational Research Conference 50 (OR 50) , 9-11 September 2008 , York, UK. . (Unpublished)

Mazlina, Abdul Majid and Ananthi, Krishnasami Masitry and Herawan, Tutut (2012) A Design of Educational Multimedia Software for Disability: A Case Study for Deaf People. In: The International Conference on Modeling and Simulation 2012 (MAS 2012) , 28-30 November 2012 , Jeju, Korea. pp. 1-8.. (Unpublished)

Mazlina, Abdul Majid and Herawan, Tutut (2013) Modelling Reactive and Proactive Behaviour in Simulation: A Case Study in a University Organisation. International Journal of Multimedia and Ubiquitous Engineering (IJMUE), 8 (6). pp. 329-338. ISSN 1975-0080. (Published)

Mazlina, Abdul Majid and Jaber, Aws Naser and Mohamad Fadli, Zolkipli and Ahmed, Firas D. (2014) Security Everywhere Cloud: An Intensive Review of DoS and DDoS Attacks in Cloud Computing. In: 4th IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2014) , 28- 30 November 2014 , Batu Ferringhi, Penang. pp. 1-5..

Mazlina, Abdul Majid and Jaber, Aws Naser and Mohamad Fadli, Zolkipli and Khan, Nusrat Ullah (2014) A Study in Data Security in Cloud Computing. In: International Conference on Computer, Communication and Control Technology (I4CT 2014) , 2–4 September 2014 , Langkawi. pp. 1-5..

Mazlina, Abdul Majid and Siebers, Peer-Olaf and Aickelin, Uwe (2010) Modelling Reactive and Proactive Behaviour in Simulation. In: Proceedings of the 2010 Operational Research Society Simulation Workshop (SW10) , 23-24 March 2010 , Worcestershire, England. .

Mazlina, Abdul Majid (2020) Adaptasi pembelajaran secara maya dalam kebiasaan bidang pendidikan. UMP News .

Mazlina, Abdul Majid and Alsariera, Yazan A. and Alamri, Hammoudeh S. and Nasser, Abdullah M. and Kamal Z., Zamli (2014) Comparative Performance Analysis of Bat Algorithm and Bacterial Foraging Optimization Algorithm using Standard Benchmark Functions. In: The 8th Malaysian Software Engineering Conference (MySEC 2014) , 22-24 September 2014 , Resort World, Langkawi. . (Unpublished)

Mazlina, Abdul Majid and Balsam, A. Mustafa and Noraziah, Ahmad (2014) Feedback in Postgraduate Supervisory Communication: An Insight From Educators. The Online Journal of Quality in Higher Education (TOJQIH), 1 (3). pp. 12-15. (Published)

Mazlina, Abdul Majid and Fakhreldin, Mohammed Adam Ibrahim and Kamal Z., Zamli (2016) An Enhanced Simulation Model for Complex Human Pedestrian Movement System using Hybrid Discrete Event and Agent Based Simulation. In: 18th International Conference on Human-Computer Interaction (HCI 2016) , 17-22 July 2016 , Toronto, Canada. pp. 1-6.. (Unpublished)

Mazlina, Abdul Majid and Jaber, Aws Naser and Mohamad Fadli, Zolkipli and Shahid, Anwar (2014) Trusting Cloud Computing for Personal Files. In: International Conference on Information and Communication Technology Convergence (ICTC 2014) , 22-24 Oktober 2014 , Busan, South Korea. pp. 488-489.. ISBN 978-1-4799-6786-5

Mazlina, Abdul Majid and Masitry, Ananthi Krishnasami and Muhammad Zulfahmi Toh, Abdullah and Sutarman and Herawan, Tutut (2013) An Investigation on Learning Performance among Disabled People Using Educational Multimedia Software: A Case Study for Deaf People. International Journal of Bio-Science and Bio-Technology (IJBSBT), 5 (6). pp. 9-20. ISSN 2233-7849. (Published)

Mazlina, Abdul Majid and Naser, Aws and Mohamad Fadli, Zolkipli and Khan, Nusrat Ullah (2015) Security Scheme for Protecting Cloud Computing Services Against Bursty DDoS Attacks. International Journal on Advances in Information Sciences and Service Sciences, 7 (1). pp. 39-45. ISSN 2233-9345. (Published)

Mazlina, Abdul Majid and Ruzainisuhanaliza, Abdul Muni and Ruzaini, Abdullah Arshah and Tuty Asmawaty, Abdul Kadir and Rozlina, Mohamed (2014) Discovering Actors and Artefacts for Social Research Network Sites. In: IEEE Symposium on Computers & Informatics (ISCI 2014) , 28-29 September 2014 , Kota Kinabalu, Sabah. pp. 1-6..

Mazma Syahidatul Ayuni, Mazlan (2019) Stochastic model of cancer growth with the effect of glycosaminoglycans (GAGs) as anticancer therapeutics. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mazni, Saad and Rosita, Husain and Anita, Abdul Rani and Airin, AbdulGhani (2019) Empowering employees with spiritual intelligence for higher quality food-hygiene practices and food service performance of on-premise caterers. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012066). ISSN 1757-8981

Mazrul Nizam, Abu Seman and Noraaini, Ali and Nurul Ain, Jalanni and Che Ku Muhammad Faizal, Che Ku Yahya and Norhafiza Ilyana, Yatim (2023) Characterization assessment on nanofiltration membrane using steric-hindrance pore (SHP) and teorell-meyer-sievers (TMS) models. Sains Malaysiana, 52 (3). pp. 941-951. ISSN 0126-6039. (Published)

Mazuina, Mohamad and Hadi, Manap (2014) An Overview of Optical Fibre Sensors for Medical Application. International Journal of Engineering Technology And Sciences (IJETS), 1 (1). pp. 9-11. ISSN 2289-697X. (Published)

Md Abdus, Sobahan (2015) Effects of industrial wastewater on water and sediment qualities and effectiveness of bioremediation methods of industrial wastewater treatment, Gebeng, Pahang, Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Md Fazlul, Karim Khan and Shah Samiur, Rashid and Mohammad, Nazmul and Hassan, Maziz and Aizi Nor Mazila, Ramli and Roesnita, Baharuddin (2020) Molecular characterization of Plasmid-Mediated Non-O157 VerotoxigenicEscherichia coliIsolatedfromInfants and children with diarrhea. Baghdad Science Journal, 17 (3). pp. 710-719. ISSN 2078-8665. (Published)

Md Munirul, Hasan and Rahman, Md Mustafizur and Suraya, Abu Bakar and Islam, Mir Sujaul and Kabir, Muhammad Nomani (2022) An overview of effect of activation functions on training and performance of artificial neural network modelling. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 115..

Md Shahnewaz, Shoaib (2023) Physical and mechanical properties of porous asphalt incorporating bamboo fiber. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Khairil Azman, Masri).

Md. Abdur, Rahim and Rahman, Md. Arafatur and Rahman, M. M and Asyhari, A. Taufiq and Alam Bhuiyan, Md. Zakirul and Ramasamy, D. (2020) Evolution of IoT-enabled connectivity and applications in automotive industry: A review. Vehicular Communications, 27. pp. 1-15. ISSN 2214-2096. (Published)

Md. Ashlyzan, Razik and Razman, Mat Tahar and Wan Hasrulnizzam, Wan Mahmood and Norlinda, Mohd Rozar (2015) Integrated Quality Function Deployment (QFD) Model for Dry Bulk Terminal Improvements (DBTI) in Malaysian Ports. Journal of Economics, Business and Management, 3 (4). pp. 413-416. ISSN 2301-3567. (Published)

Md. Noor, Ariffin and Tarek, Mostafa and Khan, Md. Maksudur Rahman (2022) Efficient treatment of organic pollutants by boron doped TiO2 photocatalysts under visible light radiation. Chemical Engineering Research and Design, 180. pp. 1-9. ISSN 0263-8762. (Published)

Md.Rezaul, Karim and Tarek, Mostafa and Shaheen, M. Sarkar and Mouras, Rabah and Ong, Huei Ruey and Hamidah, Abdullah and Cheng, C. K. and Khan, Md. Maksudur Rahman (2020) Photoelectrocatalytic reduction of CO2 to methanol over CuFe2O4@PANI photocathode. International Journal of Hydrogen Energy, 46 (48). pp. 1-12. ISSN 0360-3199. (Unpublished) (Unpublished)

Mebrahitom, Asmelash Gebremariam (2020) Redefining and Restructuring Engineering. Kolej Kejuruteraan Bulletin, 1 . pp. 5-8. ISSN 2773-5346

Mehek, Rimsha and Iqbal, Naseem and Javed, Omama and Noor, Tayyaba and Liu, Wei (2024) Improved rate capability and long cycle life of metal-organic framework derived TiO2 @V2O5 composite as an efficient cathode for sodium-ion batteries. Journal of Energy Storage, 78 (109921). pp. 1-15. ISSN 2352-152X. (Published)

Meja, Rencana (2023) Peranan universiti teknikal sangat kritikal sekarang. Utusan Malaysia .

Meng, Chung Tiong and Hamdan, Daniyal and Mohd Herwan, Sulaiman and Mohd Shafie, Bakar (2018) Investigation of binary search algorithm as maximum power point tracking technique in Solar PV System. Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018.Lecture Notes in Electrical Engineering, 538. pp. 563-570. ISSN 978-981-13-3708-6. (Published)

Meng Chung, Tiong and Hamdan, Daniyal and Mohd Herwan, Sulaiman and Mohd Shafie, Bakar and Suliana, Ab Ghani (2019) A real-time simulation platform for maximum power point tracking algorithm study in solar photovoltaic system. Applications of Modelling and Simulation, 3 (2). pp. 111-118. ISSN eISSN 2600-8084. (Published)

Mervin Ealiyas, Mathews and Anandu E., Shaji and N., Anand and A. Diana, Andrushia and Siew Choo, Chin and Eva, Lubloy (2023) IoT-based BIM integrated model for energy and water management in smart homes. In: Intelligent Edge Computing for Cyber Physical Applications. Elsevier, pp. 45-66. ISBN 9780323994125

Miah, M. Saef Ullah and Junaida, Sulaiman and Sarwar, Talha and Naseer, Ateeqa and Ashraf, Fasiha and Kamal Zuhairi, Zamli and Jose, Rajan (2022) Sentence boundary extraction from scientific literature of electric double layer capacitor domain: Tools and techniques. Applied Sciences, 12 (3). pp. 1-19. ISSN 2076-3417. (Published)

Miah, M. Saef Ullah and Junaida, Sulaiman and Talha, Sarwar and Kamal Z., Zamli and Jose, Rajan (2021) Study of keyword extraction techniques for electric double-layer capacitor domain using text similarity indexes: An experimental analysis. Complexity, 2021 (8192320). pp. 1-12. ISSN 1076-2787. (Published)

Miah, Md Saef Ullah and Junaida, Sulaiman (2023) Material named entity recognition (MNER) for knowledge-driven materials using deep learning approach. In: Lecture Notes in Networks and Systems; 4th International Conference on Trends in Cognitive Computation Engineering, TCCE 2022 , 17-18 December 2022 , Tangail. pp. 1-10., 618 (295659). ISSN 2367-3370 ISBN 978-981199482-1

Miah, Md Saef Ullah and Junaida, Sulaiman and Talha, Sarwar and Islam, Saima Sharleen and Rahman, Mizanur and Haque, Md Samiul (2023) Medical Named Entity Recognition (MedNER): Deep learning model for recognizing medical entities (drug, disease) from scientific texts. In: EUROCON 2023 - 20th International Conference on Smart Technologies, Proceedings; 20th International Conference on Smart Technologies, EUROCON 2023 , 6-8 July 2023 , Torino. pp. 158-162.. ISBN 978-166546397-3

Miah, Md Saef Ullah and Sarwar, Talha and Islam, Saima Sharleen and Haque, Md Samiul and Masuduzzaman, Md and Bhowmik, Abhijit (2022) An adaptive medical cyber-physical system for post diagnosis patient care using cloud computing and machine learning approach. In: 2022 3rd International Conference for Emerging Technology, INCET 2022 , 27-29 May 2022 , Belgaum. pp. 1-6. (180997). ISBN 978-166549499-1

Miah, Roney (2022) Identification of usnic acid derivatives as new antiviral agents via virtual screening on dengue, influenza A and avian influenza A. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadhlizil Fasihi, Mohd Aluwi).

Miah, Roney and A. K. M., Moyeenul Huq and Abdul Rashid, Issahaku and Mahmoud E. S., Soliman and Md. Sanower, Hossain and Abu Hasnat, Mustafa and Md. Alimul, Islam and Amit, Dubey and Aisha, Tufail and Mohd Fadhlizil Fasihi, Mohd Aluwi and Saiful Nizam, Tajuddin (2023) Pharmacophore-based virtual screening and in-silico study of natural products as potential DENV-2 RdRp inhibitors. Journal of Biomolecular Structure and Dynamics, 41 (21). pp. 12186-12203. ISSN 0739-1102. (Published)

Mimi Rabita, Abd Wahit (2024) Kereta Berhias UMPSA berkonsepkan teknologi jadi tumpuan ramai di Malam Karnival Rakyat Pahang 2024. UMPSA News .

Mimi Rabita, Abd Wahit (2023) UMPSA lancar Kenderaan Elektrik Bebas Karbon Amalan Lestari. UMPSA News .

Mimi Rabita, Abd Wahit (2023) UMPSA launches Sustainable Practice Carbon Free Electric Vehicles. UMPSA News .

Mimi Rabita, Abd Wahit (2024) UMPSA perkukuh kerjasama dengan Cardiff Metropolitan University dalam teknologi robotik dan STEM. UMPSA News .

Mimi Rabita, Abd Wahit (2023) UMPSA receives a visit from the President of the Malaysian Board of Technologists. UMPSA News .

Mimi Rabita, Abd Wahit (2024) UMPSA strengthens collaboration with Cardiff Metropolitan University in Robotics and STEM Technology. UMPSA News .

Mimi Rabita, Abdul Wahit (2021) 12 UMP lecturers listed as 2 world s best scientists. UMP News .

Mimi Rabita, Abdul Wahit (2021) 12 pensyarah UMP tersenarai 2 peratus saintis terbaik dunia. UMP News .

Mimi Rabita, Abdul Wahit (2022) 2 Projek Inovasi UMP rangkul juara IIC 2021. UMP News .

Mimi Rabita, Abdul Wahit (2022) 2 UMP Innovation Project named 2021 IIC champions. UMP News .

Mimi Rabita, Abdul Wahit (2022) 200 SPM candidates benefit from Yayasan PETRONAS empower ECER Academic programme. UMP News .

Mimi Rabita, Abdul Wahit (2022) 22 penyelidik UMP tersenarai 2% saintis terbaik dunia bagi dua kategori pencapaian. UMP News .

Mimi Rabita, Abdul Wahit (2022) 3,472 mahasiswa UMP terima peranti siswa. UMP News .

Mimi Rabita, Abdul Wahit (2022) Aplikasi MyPerahu UMP perkasa aktiviti sosioekonomi dan ekopelancongan nelayan. UMP News .

Mimi Rabita, Abdul Wahit (2023) Behind the lens of a smartphone, Noor Azhar creates unique work. UMP News .

Mimi Rabita, Abdul Wahit (2020) Bersama mendepani pendigitalan kampus. UMP News .

Mimi Rabita, Abdul Wahit (2023) CITREX UMP pamer 279 produk inovasi pelajar dan penyelidik. UMP News .

Mimi Rabita, Abdul Wahit (2023) CITREX UMP showcases 279 students and researchers innovative products. UMP News .

Mimi Rabita, Abdul Wahit (2022) Collaboration between DVS and UMP on blockchain system for swiftlet bird nest industry launched. UMP News .

Mimi Rabita, Abdul Wahit (2022) DREBARedu latih pelajar TVET fahami sistem robotik, bina robot. UMP News .

Mimi Rabita, Abdul Wahit (2023) DREBARedu trains TVET students understand robotic systems, build robots. UMP News .

Mimi Rabita, Abdul Wahit (2022) Dr. Noormazlinah smart SSB research produces additional nutrients for plants. UMP News .

Mimi Rabita, Abdul Wahit (2023) FK students take consolation prize in Huawei ICT Competition 2022-2023. UMP News .

Mimi Rabita, Abdul Wahit (2021) FTKEE lecturers develop digital content for T L. UMP News .

Mimi Rabita, Abdul Wahit (2021) Hasil penyelidikan UMP berkaitan genom Covid-19 diterbitkan untuk rujukan dunia. UMP News .

Mimi Rabita, Abdul Wahit (2021) ICSECS and ICoCSIM discuss efforts to empower digital community with advanced technology. UMP News .

Mimi Rabita, Abdul Wahit (2021) ICSECS dan ICoCSIM bincang usaha memperkasa masyarakat digital dengan teknologi termaju. UMP News .

Mimi Rabita, Abdul Wahit (2022) Karnival STEM UMP terap budaya pemikiran saintifik, kreatif dan inovatif. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kolaborasi UMP, Sango-Town dan Social Welfare Corporation Lemonkai bangunkan program rehabilitasi dan kepimpinan inklusif. UMP News .

Mimi Rabita, Abdul Wahit (2022) Kolaborasi strategik UMP dan Seeloz dalam pembangunan Teknologi AI. UMP News .

Mimi Rabita, Abdul Wahit (2022) Medium Cendawan Nanas hasil penyelidikan UMP dilancar. UMP News .

Mimi Rabita, Abdul Wahit (2021) Memperkasa pentadbir UMP mendepani era digital. UMP News .

Mimi Rabita, Abdul Wahit (2022) Muhammad Arif juarai WorldSkills Malaysia Belia wakili negara dalam bidang Digital Construction. UMP News .

Mimi Rabita, Abdul Wahit (2022) Muhammad Arif wins WorldSkills Malaysia Youth represents country in Digital Construction. UMP News .

Mimi Rabita, Abdul Wahit (2022) Nombor plat khas UMP UC mulai dibida 1 Februari depan. UMP News .

Mimi Rabita, Abdul Wahit (2020) Norma baharu MINDS UMP bersiaran secara dalam talian. UMP News .

Mimi Rabita, Abdul Wahit (2022) Pelajar FK berjaya bawa pulang hadiah sagu hati dalam Huawei ICT Competition 2022-2023. UMP News .

Mimi Rabita, Abdul Wahit (2022) Pengalaman Pembelajaran Imersif Maya Kalam On The Go finalis AKRI 2022. UMP News .

Mimi Rabita, Abdul Wahit (2021) Pensyarah FTKEE bangunkan kandungan digital untuk PdP. UMP News .

Mimi Rabita, Abdul Wahit (2023) Pensyarah UMPSA bangunkan sistem pengekangan gajah menggunakan kepintaran buatan. UMPSA News . ISSN 1823-7487

Mimi Rabita, Abdul Wahit (2021) Penyelidik UMP bangunkan bas swapandu SCAV untuk warga kampus. UMP News .

Mimi Rabita, Abdul Wahit (2020) Produk teknologi UMP menang Anugerah Tahun Pengkomersialan Malaysia 2020 (MCY 2020). UMP News .

Mimi Rabita, Abdul Wahit (2022) Program Outreach UMP KPT JAKM fokus Inovasi Sosial dan STEM. UMP News .

Mimi Rabita, Abdul Wahit (2022) Projek CSR UMP Lighting Up The Community diperluas bantu komuniti. UMP News .

Mimi Rabita, Abdul Wahit (2023) SULAM UMP programme shares importance of microbes in biotechnology industry. UMP News .

Mimi Rabita, Abdul Wahit (2022) Strategic collaboration between UMP and Seeloz in developing AI technology. UMP News .

Mimi Rabita, Abdul Wahit (2021) Syahirah wakili Malaysia dalam Chinese Bridge Competition. UMP News .

Mimi Rabita, Abdul Wahit (2022) Tech-and entrepreneur-savvy add value to graduates. UMP News .

Mimi Rabita, Abdul Wahit (2020) Together towards campus digitization. UMP News .

Mimi Rabita, Abdul Wahit (2010) Tujuh pelajar UMP tubuh syarikat animasi, permainan video. Berita Harian .

Mimi Rabita, Abdul Wahit (2020) UMP Bio-inspired Nanocoolant environmentally friendly refrigerant. UMP News .

Mimi Rabita, Abdul Wahit (2020) UMP Bio-inspired Nanocoolant penyejuk haba mesra alam. UMP News .

Mimi Rabita, Abdul Wahit (2021) UMP Holdings Group introduces new logo and brand identity. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP MyPerahu app empowers fishermens socioeconomic and ecotourism activities. UMP News .

Mimi Rabita, Abdul Wahit (2023) UMP appointed accredited Bosch Rexroth Academy training centre. UMP News .

Mimi Rabita, Abdul Wahit (2023) UMP bakal perluas kolaborasi dengan LiuZhou Railway Vocational Technology College dalam bidang Kejuruteraan dan Teknologi Rel. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP collaborates with NanoMalaysia Berhad in BICEP Research Project. UMP News .

Mimi Rabita, Abdul Wahit (2023) UMP dan Bosch Rexroth jalin kerjasama dalam pembangunan Kejuruteraan Automasi. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP dan Kerajaan Negeri Pahang jalin kerjasama dalam analitis data raya. UMP News .

Mimi Rabita, Abdul Wahit (2021) UMP ke arah sebuah Kampus Pintar. UMP News .

Mimi Rabita, Abdul Wahit (2020) UMP kongsi kepakaran dalam teknologi satelit dan telekomunikasi. UMP News .

Mimi Rabita, Abdul Wahit (2013) UMP kongsi kepakaran di Jepun. Berita Harian .

Mimi Rabita, Abdul Wahit (2022) UMP lancar pakej makanan Ready to Eat guna teknologi retort. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP launches Ready to Eat food package using retort technology. UMP News .

Mimi Rabita, Abdul Wahit (2023) UMP meterai MoU dengan CPSC tingkat kebolehpasaran lulusan TVET. UMP News .

Mimi Rabita, Abdul Wahit (2020) UMP products win Malaysia Commercialisation Year 2020 (MCY 2020) Award. UMP News .

Mimi Rabita, Abdul Wahit (2021) UMP raih 19 pingat emas dianugerahkan ITEX Golden Award. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP recognised as hub for TVET automotive. UMP News .

Mimi Rabita, Abdul Wahit (2021) UMP researchers develop SCAV self-driving bus for campus residents. UMP News .

Mimi Rabita, Abdul Wahit (2020) UMP shares expertise in satellite and telecommunications technology. UMP News .

Mimi Rabita, Abdul Wahit (2023) UMP signs SARE agreement with TNB and GSPARX. UMP News .

Mimi Rabita, Abdul Wahit (2020) UMP students continue their studies online, postpone entering campus. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP tawar Program Asasi Sains dan Teknologi. UMP News .

Mimi Rabita, Abdul Wahit (2023) UMP to expand collaboration with LiuZhou Railway Vocational Technology College in the field of Engineering and Railway Technology. UMP News .

Mimi Rabita, Abdul Wahit (2021) UMP towards Smart Campus. UMP News .

Mimi Rabita, Abdul Wahit (2021) UMP, Dapur Infaq jalin kerjasama pembangunan prasarana digital untuk manfaat komuniti. UMP News .

Mimi Rabita, Abdul Wahit (2021) UMP, FeMAC outline a collaboration to strengthen TVET programmes. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, Huawei Services Hong Kong Co., Limited improve collaboration in telecommunications and mobile application technology. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, Huawei Services Hong Kong Co., Limited tingkat kerjasama dalam bidang telekomunikasi dan teknologi aplikasi mudah alih. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, IMPACT MALAYSIA meterai kerjasama program Inovasi Belia dan Komuniti. UMP News .

Mimi Rabita, Abdul Wahit (2021) UMP, IYRES collaboration in big data technology and youth development. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, MBK bakal berkolaborasi dalam pengurusan sistem lalu lintas dan pengangkutan awam yang efektif. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP, MBK collaborate in effective management of traffic and public transport systems. UMP News .

Mimi Rabita, Abdul Wahit (2021) UMP, PERODUA establish strategic partnership to offer BTech Apprenticeship programme. UMP News .

Mimi Rabita, Abdul Wahit (2021) UMP, Terra Drone collaborate to improve expertise in air mobility technology. UMP News .

Mimi Rabita, Abdul Wahit (2021) UMP, Terra Drone jalin kerjasama tingkat kepakaran teknologi mobiliti udara. UMP News .

Mimi Rabita, Abdul Wahit (2023) UMP, UNITEN bakal teroka kerjasama strategik berkaitan tenaga. UMP News .

Mimi Rabita, Abdul Wahit (2023) UMP, UNITEN to explore energy related strategic collaboration. UMP News .

Mimi Rabita, Abdul Wahit (2023) UMPSA lecturer develops elephant deterrence system using artificial intelligence. UMPSA News .

Mimi Rabita, Abdul Wahit (2014) WIAF iktiraf kehebatan penyelidik UMP. Berita Harian .

Mimi Rabita, Abdul Wahit (2023) Wacana ilmu dedah teknologi dron di Malaysia. UMPSA News . ISSN 1823-7487

Mimi Rabita, Abdul Wahit (2023) Wakil industri akademia berkumpul dalam Perbincangan Meja Bulat (RTD) ke arah TVET aras tinggi. UMP News .

Mimi Rabita, Abdul Wahit (2020) Wawancara Bersama PLPU UMP Menuju Era Kampus Digital. UMP News .

Mimi Rabita, Abdul Wahit and Nur Ainaa Adhreena, Muhamad Shukri (2023) Discourse on drone technology in Malaysia. UMPSA News .

Mimi Rabita, Abdul Wahit and Siti Nurfarmy, Ibrahim (2020) Blockchain technology can improve food supply chain security. UMP News .

Mimi Rabita, Abdul Wahit and Siti Nurfarmy, Ibrahim (2020) Penyelidik Fakulti Komputeran kongsi kepakaran dalam projek transformasi digital perikanan rekreasi. UMP News .

Mimi Rabita, Abdul Wahit and Siti Nurfarmy, Ibrahim (2020) Teknologi Blockchain mampu jamin keselamatan rantaian bekalan makanan. UMP News .

Mimi Sakinah, A. M. (2017) Conceptual paper presentation (engineering). Penerbit UMP, Kuantan, Pahang. ISBN 978-967-2054-09-2

Mimi Sakinah, A. M. (2009) Sustainable production of natural dyes for textile product via SUBMEX. CREATE . p. 30. ISSN 1823-7487

Mimi Sakinah, A. M. (2010) Sustainable production of sorbitol from biomass using green technology approach. Quest, 6 (3). p. 19. ISSN 1985-8159

Ming, Chiam Tat and Muhammad Ikram, Mohd Rashid (2021) Type 2 electric vehicle charger compatible for single phase and three phase. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Minhaj, Uddin Monir and Yousuf, Abu and Azrina, Abd Aziz (2020) Syngas fermentation to bioethanol. In: Lignocellulosic Biomass to Liquid Biofuels. Elsevier, pp. 195-216. ISBN 978-0-12-815936-1

Minhalina, Ahmad Buhairi and Farhana, Mohd Foudzi and Fathin Iliana, Jamhari and Abu Bakar, Sulong and Nabilah Afiqah, Mohd Radzuan and Norhamidi A., Muhamad and Intan Fadhlina, Mohamed and Abdul Hadi, Azman and Wan Sharuzi, Wan Harun and Al-Furjan, M. S.H. (2023) Review on volumetric energy density: Influence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion. Progress in Additive Manufacturing, 8 (2). pp. 265-283. ISSN 2363-9512. (Published)

Mirza, Rizwan Sajid and Noryanti, Muhammad and Roslinazairimah, Zakaria (2019) Construct validation in secondary data: A guideline for medical data mining. In: 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICOAIMS 2019) , 23-25 Julai 2019 , Kuantan, Pahang. pp. 1-8.. (Unpublished)

Mishra, Puranjan (2018) Biohydrogen production from palm oil mill effluent via sequential dark-photo fermentation. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ab Wahid, Zularisam).

Mishra, Puranjan and Hai, Tao and Jasni, Mohamad Zain and Saini, Karuna and Manoj Kumar, Nallapaneni and Zularisam, Abdul Wahid (2023) Co-digestion of domestic kitchen food waste and palm oil mill effluent for biohydrogen production. Sustainable Energy Technologies and Assessments, 55 (102965). pp. 1-5. ISSN 2213-1388. (Published)

Mishra, Puranjan and Krishnan, Santhana and Rana, Supriyanka and Singh, Lakhveer and Mimi Sakinah, A. M. and Zularisam, A. W. (2019) Outlook of fermentative hydrogen production techniques: an overview of dark, photo and integrated dark-photo fermentative approach to biomass. Energy Strategy Reviews, 24. pp. 27-37. ISSN 2211-467X. (Published)

Mishra, Puranjan and Singh, Lakhveer and Zularisam, A. W. and Krishnan, Santhana and Rana, Supriyanka and M. Amirul, Islam and Mimi Sakinah, A. M. and Ameen, Fuad and A., Syed (2018) Photohydrogen production from dark-fermented palm oil mill effluent (DPOME) and statistical optimization: Renewable substrate for hydrogen. Journal of Cleaner Production, 199. pp. 11-17. ISSN 0959-6526. (Published)

Mofijur, M. and Rasul, Md Golam and Hyde, J. and Azad, A. K. and R., Mamat and Bhuiya, M. M. K. (2016) Role of Biofuel and Their Binary (Diesel–Biodiesel) and Ternary (Ethanol–Biodiesel–Diesel) Blends on Internal Combustion Engines Emission Reduction. Renewable and Sustainable Energy Reviews, 53. pp. 265-278. ISSN 1364-0321. (Published)

Mogie, Callista Ivana and Ricky, Ricky and Wang, Gunawan and Sfenrianto, Sfenrianto and Azlee, Zabidi and Gui, Anderes (2023) Improving driver loyalty through using gamification approach. In: IES 2023 - International Electronics Symposium: Unlocking the Potential of Immersive Technology to Live a Better Life, Proceeding , 8-10 August 2023 , Denpasar. pp. 604-609. (192646). ISBN 979-835031473-1

Mohamad Azam, Ramly (2016) Phytoremediation potential of water spinach, ipomoea aquatic and aquaponic farming system in improving water quality of heavy metals contaminated water resources. Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang.

Mohamad Azim Fitri, Abd Aziz (2017) UMP digesa jadi pelopor. Harian Metro . p. 40.

Mohamad Azmil Sahidan, Abdul Shatar (2019) Tracking of u-turn behaviour for heavy vehicles at three locations along FR2 (Gambang to Kuantan). Faculty of Engineering Technology, Universiti Malaysia Pahang.

Mohamad Azrul Amin, Mohamed Asof (2014) Student courses management plan. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Mohamad Azwani, Londing (2016) Effectiveness of maintanance system at palm oil mill. Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Mohamad Eliyass, Jamaruppin (2014) Pigeonhole notification system by utilizing telegram messenger. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Mohamad Fadli, Zolkipli (2012) A framework for malware identification based on behavior. PhD thesis, Universiti Sains Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Faizal, Ridzwan and Saiful Anwar, Che Ghani and Goyal, A. (2022) Numerical analysis of internal flow in internally cooled cutting tool. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 116..

Mohamad Firdaus, Mohamad (2015) Smart homerity system. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Mohamad Hafiz, Yusoff Bakri (2017) Produk UMP antara pemenang AIN 2017. Utusan Malaysia .

Mohamad Hafizuddin, Mohd Bakhri (2017) Measuring safety rating in construction project (case study). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohamad Hanapi, Mohamad (2007) Design and fabrication of exhibition rack. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohamad Haniki, Nik Mohamed and Azizur, Rahman and Shazia, Jamshed and Mahmood, Syed (2018) Effectiveness and safety of electronic cigarettes among sole and dual user vapers in Kuantan and Pekan, Malaysia: a six-month observational study. BMC Public Health, 18 (1). pp. 1-10. ISSN 1471-2458. (Published)

Mohamad Haris, Abdullah (2017) Safety and health practice by construction workers. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohamad Ikhwan, Mohd Rashid (2018) The investigation of heat stress among workers in pineapple plantation. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Mohamad Ilyas, Rizan and Muhammad Nur Aiman, Shapiee and Muhammad Amirul, Abdullah and Mohd Azraai, Mohd Razman and Anwar P. P., Abdul Majeed (2020) The classification of elbow extension and flexion: A feature selection investigation. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 68-73. ISSN 2637-0883. (Published)

Mohamad Ilzam, Jamat 3 research projects scored high marks at Archimedes 2011. Pekan Review, 4 . p. 27. ISSN 2180-3099

Mohamad Izuan, Izzudin (2022) Investigation on performance, combustion and emission characteristics using biodiesel-butanol-water blends in diesel engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Fitri, Yusop).

Mohamad Milood, Mohamad Almelian (2022) Enhancement of performance and response time of cascaded vsc statcom in the presence of voltage variation and low power factor. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Izzeldin Ibrahim, Mohamed Abdelaziz).

Mohamad Nazirul Mubin, Merzuki and Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Mohd Shahrir Mohd, Sani and Zhang, Bo (2021) Experimental and numerical investigation of fibre-metal-laminates (FMLs) under free vibration analysis. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 854-860., 48 (4). ISSN 2214-7853

Mohamad Nor Azan, Mohamad Nawi (2009) The role and effectiveness of project management consultant in Malaysia's construction industries. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohamad Noriman, Tumiran (2014) UMP riders club portal (URCP). Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Mohamad R., M. Yasin (2014) Characterization of Light Weight Composite Panels for Table Tennis Table. International Journal of Engineering Technology And Sciences (IJETS), 2 (1). pp. 48-54. ISSN 2289-697X. (Published)

Mohamad Reeduan, Mustapha (2024) Tawar beg kertas caj minimum hentikan guna plastik. Berita Harian .

Mohamad Ridhwan Shahril, Baharudin (2016) Design and deveploment of motion and thermal controller for thermal fatigue machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Rizza, Othman (2019) Fractionation of oleochemical fatty acid using vacuum dividing wall column : A controllability analysis. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (1). ISSN 1757-8981

Mohamad Rizza, Othman (2021) Pusat Kompetensi UMP memperkasa pendidikan dan latihan bidang Teknologi Kejuruteraan Kimia dan Proses. UMP News .

Mohamad Rizza, Othman (2022) UMP perkasa Agenda Transformasi Digital Program TVET melalui kerjasama strategik bersama AspenTech. UMP News .

Mohamad Rizza, Othman and Zulkifly, Jemaat and Chin, Sim Yee and Mohd Arman, Abd Kadir and Hairul Hisham, Ismail and Shafie, Mohammad and Faried, Abdullah (2021) Intensified equipment for producing high purity mtbe. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Mohamad Rozi, Hassan (2019) Dimensi baharu teknousahawan. Kosmo . p. 26.

Mohamad Rusdi, Abdul Rahman and L. H., Shah and M., Ishak (2015) Parameter Optimization of Preheating Method on Aluminium Stainless Steel Metal Inert Gas (MIG) Dissimilar Welding. Applied Mechanics and Materials, 773-74. pp. 253-256. ISSN 1662-7482. (Published)

Mohamad Rusydi, Mohamad Yasin (2014) Fakulti Teknologi Kejuruteraan jalin hubungan baik dengan FMM. CREATE . p. 30. ISSN 1823-7487

Mohamad Rusydi, Mohamad Yasin (2014) Prof. Emeritus Dr. Ario kongsi kepakaran teknologi kejuruteraan pembuatan. CREATE . p. 13. ISSN 1823-7487

Mohamad Rusydi, Mohamad Yasin and S. N. A., Abdul Razak (2021) Effect of high temperature solution heat treatment time on quality index and morphology of A356 DC alloy. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1924-1928., 48. ISSN 2214-7853

Mohamad Saiful Anuar, Yusof (2013) Study loan management system (SLMS) with MVC model & servlet. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Mohamad Saifullah, Samsudin and Ahmad Kamil, Arshad and Khairil Azman, Masri and Mohd Khairul Afzan, Mohd Lazi and Hasmawati, Mat Hassan and Ekarizan, Shaffie (2023) The Influence of Colloidal Nanosilica on Microstructure of Asphalt Binder after Long-Term Aging. In: World Sustainable Construction Conference Series 2022 (WSCC 2022) , 14 - 15 October 2022 , Kuala Lumpur, Malaysia. pp. 101-113., 4. ISSN 2674-1237

Mohamad Shahrulnizam, Zakaria and Mohd Rashidi, Salim and Mohd Haniff, Ibrahim and Asrul Izam, Azmi and Ahmad Sharmi, Abdullah and Muhammad Yusof, Mohd Noor and Nor Hafizah, Ngajikin and Hadi, Manap (2017) Analysis of improved low cost transmissive formaldehyde (CH2O) ultraviolet gas sensor. Journal of Electrical Engineering, 16 (2). pp. 16-21. ISSN 0128-4428. (Published)

Mohamad Shaiful, Abdul Karim and Norazwina, Zainol and Nur izaty Ak'ma, Abu Hassan As'ari and Nurhafizah, Abu Talip Yusof and Nor Hazwani, Aziz (2022) Effect of processing parameters on cellulose content extracted from pineapple leaf. Biocatalysis and Agricultural Biotechnology, 42 (102339). pp. 1-12. ISSN 1878-8181. (Published)

Mohamad Shofi, Mat Isa (2016) Huffaz-M bantu hafazan al-Quran. Utusan Malaysia . p. 32.

Mohamad Shofi, Mat Isa (2017) UMP lonjak penyelidikan berimpak tinggi. Utusan Malaysia . p. 26.

Mohamad Shofi, Mat Isa (2022) UMP pergiat kerjasama industri teroka teknologi berimpak tinggi. Utusan Malaysia .

Mohamad Shofi, Mat Isa (2021) UMP raih Anugerah ITEX Golden Award. Utusan Malaysia .

Mohamad Syafiq, Abdul Wahab and Alia Aqilah, Ghazali and Nurul Faizah, Abd Ghapar and Sunarti, Abd Rahman and Rozaimi, Abu Samah (2021) Thin film nanocomposite (Tfnc) membranes: Future direction of Tfnc synthesis for alcohol dehydration. Surfaces and Interfaces, 25 (101165). pp. 1-17. ISSN 2468-0230. (Published)

Mohamad Syafiq, Abdul Wahab and Sunarti, Abd Rahman and Rozaimi, Abu Samah (2020) Hydrophilic enhancement of Polysulfone membrane via Graphene Oxide embedded thin film nanocomposite for Isopropanol dehydration. Vacuum, 180 (109569). pp. 1-4. ISSN 0042-207X. (Published)

Mohamad Syafiq, Abdul Wahab and Sunarti, Abd Rahman and Rozaimi, Abu Samah (2020) Super selective dual nature GO bridging PSF-GOPebax thin film nanocomposite membrane for IPA dehydration. Polymer-Plastics Technology and Materials, 60 (6). pp. 670-679. ISSN Print: 2574-0881 Online: 2574-089X. (Published)

Mohamad Syahmi, Ismail and Fahmi, Samsuri (2022) Design and simulation study of antenna for wireless body area network (WBAN). In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 214..

Mohamad Syazwan Hanif, Abd Latif (2019) An ergonomic assessment among administrative workers in higher learning institution. Faculty of Engineering Technology, Universiti Malaysia Pahang.