Items where Year is 2019

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: - | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items: 3201.

-

-, - (2019) Stereolithography 3D printing development of 3D printing machine controller using the predefined closest-distance volume interpolator system. , [Research Report: Research Report] (Unpublished)

A

A., Fairuzullah and A., Noraziah and R. A., Arshah and T., Herawan (2019) Optimize Performance Load Balancing Techniques Using Binary Vote Assignment Grid Quorum (BVAGQ): A Systematic Review. In: Proceedings of the International Conference on Data Engineering 2015 (DaEng-2015), 25 - 26 April 2015 , Bali, Indonesia. pp. 31-39., 520. ISBN 978-981-13-1799-6

A., Ismail and M. R., Intan Suhana and K. A., Masri and Rapar, N. H. (2019) Exploration on pavement surface conditions attributed to Mineral freight and logistics operations on kuantan road Network. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 22-30..

A., Rashidi and T. A., Majid and A., Faisal and M. I., Adiyanto (2019) Impact of strong repeated ground excitation to the on-plan rotation of asymmetric building with various strength and stiffness eccentricities. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-10., 244 (012023). ISSN 1755-1315

A. A., Hairuddin and H. M., Tobib and Z., Fariza and M. M., Noor (2019) The performance of a single-cylinder diesel engine fuelled with egusi based biodiesel. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012045). ISSN 1757-899X

A. A., Mohamed and E. J., Wei and Putra Jaya, Ramadhansyah and M. A., Farooqi and M. K. I. M., Satar and N., Mashros (2019) An Investigation on Urban Circle Rail Transit: A Case Study on the Alignment of Mass Rapid Transit 3 (Circle Line). In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8..

A. A., Razak and Zafri Azran, Abdul Majid and F., Basrawi and A. F., Sharol and M. H., Ruslan and K., Sopian (2019) A performance and technoeconomic study of different geometrical designs of compact single-pass cross-matrix solar air collector with square-tube absorbers. Solar Energy, 178. 314 - 330. ISSN 0038-092X. (Published)

A. A. G., Nadiatul Adilah and H., Nurul Nadia (2019) Water quality status and heavy metal contains in selected rivers at tasik chini due to increasing land use activities. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 136-144..

A. A. G., Nadiatul Adilah and S. Y., Ayman Mohammed and Putra Jaya, Ramadhansyah and O., Rokiah and Mohd Rosli, Hainin (2019) The influence of steel slag as alternative aggregate in permeable concrete pavement. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 60-67..

A. A. M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat and Mahendran, Samykano and G., Najafi (2019) Performance improvement in mobile air conditioning system using Al2O3/PAG nanolubricant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1299-1310. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

A. C., Ainul Mardziah and Amizatulhani, Abdullah (2019) Numerical study of slope protected by rockfill and shredded tyre mixture gabion wall. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 38-43..

A. F., Ahmad and A. R., Razali and Intan Suhana, Mohd Razelan and W. A. H. W., Hamizan (2019) Effect of waste polyethylene terephthalate (PET) on properties of road aggregate. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012056). ISSN 1757-8981 (Print), 1757-899X (Online)

A. F., Salmanfarsi and H., Awang and Mohamad Idris, Ali (2019) Rock mass classification for rock slope stability assessment in Malaysia : a review. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 242-250..

A. F., Salmanfarsi and Haryati, Awang and Mohamad Idris, Ali (2019) A review on the development of rock slope stability assessment in Malaysia. In: IOP Conference Series: Earth and Environmental Science, International Conference on Agricultural Technology, Engineering and Environmental Sciences, 21-22 August 2019, , Banda Aceh, Indonesia. pp. 1-8., 365 (012063). ISSN 1755-1315

A. F., Sharol and Amir, Abdul Razak and Z. A. A., Majid and M. A. A., Azmi and M. A. S. M., Tarminzi (2019) Performance of force circulation cross-matrix absorber solar heater integrated with latent heat energy storage material. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012107). ISSN 1757-899X

A. H., Sufian and A. S., Jamaludin and A. N., Ibrahim and M. N., Mhd Razali and M. S., Osman and S. B., Hamzah (2019) Tyre Safety Performance on Asphalt Pavement in Malaysia Climate - Analysis through Finite Element Method. Journal of the Society of Automotive Engineers Malaysia, 3 (3). pp. 236-245. ISSN 2600-8092(Printed); 2550-2239(Online). (Published)

A. I., Ramadhan and W. H., Azmi and R., Mamat and K. A., Hamid and Norsakinah, S. (2019) Investigation on stability of tri-hybrid nanofluids in water-ethylene glycol mixture. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012068). ISSN 1757-899X

A. J. S., Hanifah and W. N. W. M. N., Hissyam and Aiman, M. H. and M., Ishak and T., Ariga (2019) Effect of copper based filler composition on the strength of brazed joint. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 5090-5103. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. K., Arshad and E., Shaffie and K. A., Masri and W., Hashim and Z. A., Rahman (2019) Performance of dense graded asphaltic concrete using nanosilica modified bitumen. In: IOP Conference Series: Materials Science and Engineering, 10th Malaysian Road Conference & Exhibition 2018, 29-31 October 2018 , Selangor, Malaysia. pp. 1-10., 512 (012061). ISSN 1757-8981 (Print), 1757-899X (Online)

A. K. M., Kafi and Alim, Samiul and Rajan, Jose and M. M., Yusoff (2019) Fabrication of a glucose oxidase/multiporous tin-oxide nanofiber film on Prussian blue–modified gold electrode for biosensing. Journal of Electroanalytical Chemistry, 852 (113550). pp. 1-6. ISSN 1572-6657. (Published)

A. K. M., Kafi and Alim, Samiul and Rajan, Jose and M. M., Yusoff (2019) Hemoglobin Immobilization on multiporous nanofibers of SnO2 and chitosan composite for hydrogen peroxide sensing. Journal of Nanoscience and Nanotechnology, 19 (4). pp. 2027-2033. ISSN 1533-4880 (Print); 1533-4899 (Online). (Published)

A. K. M., Kafi and Rajan, Jose and M. M., Yusoff and Samiul, Alim (2019) Application of polymerized multiporous nanofiber of SnO2 for designing a bienzyme glucose biosensor based on HRP/GOx. International Journal of Biological Macromolecules, 123. pp. 1028-1034. (Published)

A. L., Amminudin and Putra Jaya, Ramadhansyah and Doh, Shu Ing and S. A., Mangi and W. I., Mohd Haziman (2019) Effect of dried sewage sludge on compressive strength of concrete. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 297-303..

A. M., Faten Albtoush and R. A., Bahamid and Doh, Shu Ing and A. R., Rahimi and Saad, M. Syamsyul H. and S. Adilen, Lucia (2019) A review on causes of cost overrun in the construction projects. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 162-172..

A. M., Norkhizan and R., Mamat and A., Hamidi and Ahmad Fitri, Yusop (2019) Influence of TDSI/LUTAH fuel booster on the performance and emissions of diesel engine. In: AIP Conference Proceedings:, 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. pp. 1-10., 2059 (020042).

A. Q., Mohamad and Zulkhibri, Ismail and Mehdi, Qasim and M. N., Zakaria and Sharidan, Shafie (2019) Exact solutions on mixed convection flow of accelerated non-coaxial rotation of mhd viscous fluid with porosity effect. In: 15th International Conference Diffusion In Solids And Liquids, 24 - 28 Jun 2019 , Athens, Greece. pp. 1-14.. (Unpublished)

A. R., Radzi and Abdul Rahimi, Abdul Rahman and Doh, Shu Ing and M., Esa (2019) Construction readiness parameters for highway projects. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 195-204..

A. R., Yusoff and B. M., Deros and D. D. I., Daruis and E. H., Sukadarin (2019) Foot-Transmitted Vibration: Automotive Accelerator Pedal-Pad Vibration on Tarmac and Paved Road. Journal of the Society of Automotive Engineers Malaysia, 3 (1). pp. 50-62. ISSN 2550-2239. (Published)

A. Razak, J. and Mohamad, N. and Mahamood, M. A. and Jaafar, R. and Othman, I. S. and Ismail, M. M. and Tee, L. K. and Ramli, Junid and Mustafa, Z. (2019) On the preparation of EPDM-g-MAH compatibilizer via melt-blending method. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5424 -5440. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. S., Bawono and Mohamad Idris, Ali and F., Ma'arif (2019) A comparison method for calculating ground shaking - case study: Yogyakarta earthquake 2006. In: IOP Conference Series: Earth and Environmental Science, International Conference on Sustainable Insfrastructure, 29-30 October 2018 , Yogyakarta, Indonesia. pp. 1-11., 366 (012014). ISSN 1755-1307

A. S., Bawono and Mohamad Idris, Ali and S., Kusumadew and Noram Irwan, Ramli (2019) Methodological study to classification of damage state immediately subsequent to the Banjarnegara Indonesia earthquake on 2018. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 221-226..

A. S. H. M., Yasir and N. M. Z. N., Mohamed and A. Q., Basri (2019) Development of framework for armoured vehicle assembly line efficiency improvement by using simulation analysis: Part 1. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-13., 469 (012090). ISSN 1757-899X

Aainaa Hatin, Ahmad Tarmizi and Siti Nazahiyah, Rahmat and Ahmad Tarmizi, Abd Karim and Nurul Nadrah Aqilah, Tukimat (2019) Climate change and its impact on rainfall. International Journal of Integrated Engineering, 11 (1). pp. 170-177. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Aainaa Izyan, Nafsun and A. J., Nasir and M. N., Mohd Jamal and N. A. F., A. Samad and S., Mohamad and A., Abdulrazik and F., Herz (2019) Influence of activation temperature and acid concentration on the sludge-based activated carbon production. In: Energy Security and Chemical Engineering Congress (ESCHE2019), 17-19 July 2019 , Parkroyal Resort Penang, Malaysia. pp. 1-13.. (Unpublished)

Aaron, Kong Chak Ho (2019) Electroporation of lignocellulosic biomass. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Abas, M. F. and Ahmad, Hamzah and Saad, N. Md and Pebrianti, Dwi and Mohd Rizal, Arshad (2019) The development of robust and fast response control algorithm for UAV crop duster. , [Research Report: Research Report] (Unpublished)

Abbas, A. Wahab and N. F., Abdullah and Mohd Azri Hizami, Rasid (2019) Commutator fault detection of brushed dc motor using thermal assessment. In: IOP Conference Series: Materials Science and Engineering: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018; Universiti Malaysia Pahang, 31 October 2018 , UMP Pekan, Pahang. pp. 1-8., 469 (1). ISSN 17578981

Abbas, Shabudin and Mohd Jamil Mohamed, Mokhtarudin and Payne, Stephen J. and Nik Abdullah, Nik Mohamed (2019) Investigation of the capillary effects toward brain tissue poroelastic properties using asymptotic expansion homogenization. In: 6th International Conference on Computational and Mathematical Biomedical Engineering (CMBE 2019), 10-12 June 2019 , Japan. pp. 1-4..

Abbas Saliimi, Lokman and M. A., Ameedeen (2019) Modern chatbot systems: a technical review. In: Proceedings of the Future Technologies Conference (FTC) 2018. Advances in Intelligent Systems and Computing, 2 . Springer Nature Switzerland, Switzerland, pp. 1012-1023. ISBN 978-3-030-02683-7

Abd El-Hakim, Abou El fettouh Abd El Moneim and Haroun, Ahmed Abd Allah and Rabie, Abdel Gawad Mohamed and Ali, Gomaa A. M. and Abdelrahim, Mohamed Yahia Marei (2019) Improving the mechanical and thermal properties of chlorinated poly(vinyl chloride) by incorporating modified CaCO3 nanoparticles as a filler. Turkish Journal of Chemistry, 43 (3). pp. 750-759. ISSN 1300-0527. (Published)

Abd Manaf, Intan Shafinaz and Cheong, Jiun Yi and Ab. Rahim, Mohd Hasbi and Maniam, Gaanty Pragas (2019) Utilization of waste fish bone as catalyst in transesterification of RBD palm oil. Materials Today: Proceedings 19 (2019) 1294–1302, 19 (1). pp. 1294-1302. (Published)

Abdalla, Ahmed N. and Awad, Omar I. and Tao, Hai and Ibrahim, Thamir K. and R., Mamat and Hammid, Ali Thaeer (2019) Performance and emissions of gasoline blended with fusel oil that a potential using as an octane enhancer. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41 (8). pp. 931-947. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Abdalla, Ahmed N. and Tao, Hai and Bagaber, Salem Abdullah and Obed M., Ali and Kamil, Mohammed and Ma, Xiao and Awad, Omar I. (2019) Prediction of emissions and performance of a gasoline engine running with fusel oil–gasoline blends using response surface methodology. Fuel, 253. pp. 1-14. ISSN 0016-2361. (Published)

Abdelmadjid, Benraghda and Noor Raha, Mohd Radzuan (2019) Engineering lecturers’ perceptions towards student self- assessment in enhancing undergraduates’ oral presentation skills. In: The 7th Global Conference on Linguistics and Foreign Language Teaching (LINELT-2019), 29 April - 1 May 2019 , The Academic Events Group. pp. 1-14.. (Unpublished)

Abdul Hafiz, Mat Sulaiman and Ida Laila, Ahmad and Ruzairi, Abdul Rahim and Jaysuman, Pusppanathan and Dirman, Hanafi and Elmy Johana, Moahamad and Mohd Fadzli, Abdul Shaib and Leow, Pei Ling and Yasmin, Abdul Wahab and Suzanna, Ridzuan Aw (2019) An overview of electrical characterization techniques for biological cell. International Journal of Integrated Engineering, 11 (6). pp. 166-175. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Abdul Haleem, Habeeb Mohamed and Muhammad Aizzat, Zakaria (2019) Torque control analysis of platform based end effector ankle foot orthosis for rehabilitation. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 35-38. ISSN 2637-0883. (Published)

Abdul Halim, Abdul Karim and Hasmadi, Hassan (2019) Kepuasan kerja dalam kalangan pegawai Penguatkuasa Agama Negeri Pahang terhadap. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 155-163.. ISBN 978-967-17268-1-5

Abdul Halim, Abdul Karim and Hasmadi, Hassan (2019) Persepsi pegawai Penguatkuasa Agama Negeri Pahang terhadap Arahan Tetap Pengarah Jaip 2017. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 356-365.. ISBN 978-967-17268-1-5

Abdul Halim, Abdul Razik and Khor, Cheng Seong and Elkamel, Ali (2019) A model-based approach for biomass-to-bioproducts supply chain network planning optimization. Food and Bioproducts Processing, 118. pp. 293-305. ISSN 0960-3085. (Published)

Abdul Halim, Taib and Hasmadi, Hassan (2019) Tahap keyakinan penjaga terhadap aktiviti pembelajaran dalam membimbing pelajar untuk melahirkan generasi Al-Quran. International Journal of Humanities Technology and Civilization (IJHTC), 2 (7). pp. 20-25. ISSN 2289-7216. (Published)

Abdul Rafiq, Abdullah and Tuty Asmawaty, Abdul Kadir and Siti Normaziah, Ihsan (2019) A review of the use of artificial intelligent in serious games for public health. In: Third International Conference On Computational Science And Information Management, 21 - 24 March 2019 , Lombok, Indonesia. pp. 1-8.. (Unpublished)

Abdul Rahim, A. H. and A. R. A., Razak and A. M., Yusof and Putra Jaya, Ramadhansyah and R., Zakaria and Eeydzah, Aminudin and M. A. S. K., Anuar and Khairulzan, Yahya and Zaiton, Haron and R., Yunus and I. A., Rashid (2019) Noncompliance of the occupational safety and health legislation in the Malaysian construction industry. In: IOP Conference Series: Earth and Environmental Science, The 12th International Civil Engineering Post Graduate Conference (SEPKA), The 3rd International Symposium on Expertise of Engineering Design (ISEED), 27-28 August 2018 , Johor, Malaysia. pp. 1-8., 220 (012043). ISSN 1755-1315

Abdul Rahim, A. H. and M. R. A., Noor Azmi and Eeydzah, Aminudin and Putra Jaya, Ramadhansyah and R., Zakaria and A. M. M., Zawawi and Khairulzan, Yahya and Zaiton, Haron and R., Yunus and C. C., Saar (2019) Causes of fatal construction accidents in Malaysia. In: IOP Conference Series: Earth and Environmental Science, The 12th International Civil Engineering Post Graduate Conference (SEPKA), The 3rd International Symposium on Expertise of Engineering Design (ISEED), 27-28 August 2018 , Johor, Malaysia. pp. 1-11., 220 (012044). ISSN 1755-1315

Abdul Rahim, A. H. and Ridzuan, Azhari and Rozana, Zakaria and Eeydzah, Aminudin and Putra Jaya, Ramadhansyah and Logeswaran, Nagarajan and Khairulzan, Yahya and Zaiton, Haron and Riduan, Yunus (2019) Causes of crane accidents at construction sites in Malaysia. In: IOP Conference Series: Earth and Environmental Science, The 12th International Civil Engineering Post Graduate Conference (SEPKA), The 3rd International Symposium on Expertise of Engineering Design (ISEED), 27-28 August 2018 , Johor, Malaysia. pp. 1-11., 220 (012028). ISSN 1755-1315

Abdul Rahimi, Abdul Rahman and Ayer, Steven K. (2019) Enhancing the non-technological skills required for effective building information modeling through problem-based learning. Journal of Information Technology in Construction, 24. pp. 154-166. ISSN 1874-4753. (Published)

Abdul Rahimi, Abdul Rahman and Ayer, Steven K. and London, Jeremi S. (2019) Applying problem-based learning in a building information modeling course. International Journal of Engineering Education, 35 (3). pp. 956-967. ISSN 0949-149X. (Published)

Abdul Rahman, Alimuddin (2019) Study on characteristics of sediment and sedimentation rate in Kenau River for year 2008, 2016 and 2019. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Abdul Rahman, Mohd Kasim and Nur Syamilah, Arifin and Syazwani, Mohd Zokri and Mohd Zuki, Salleh (2019) Fluid-particle interaction with buoyancy forces on jeffrey fluid with newtonian heating. CFD Letters, 11 (1). pp. 1-16. ISSN 2180-1363. (Published)

Abdul Rahman, R. N. U. and Ruwaida, A. R. and Ismail, M. (2019) Effect of temperature and residence time on the characteristics of torrefied food. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-11., 702 (1). ISSN 1757-8981

Abdul Rahman, Talib and Hasan, Ahmad (2019) Keberkesanan latihan TVET dan bantuan modal peralatan kepada golongan asnaf fakir dan miskin dalam peningkatan di negeri Pahang. Jurnal Dunia Pengurusan, 1 (1). pp. 1-8. ISSN 2682-8251. (Published)

Abdul Rahman, Talib and Hasan, Ahmad (2019) Penilaian kelayakan asnaf fakir dan miskin berdasarkan had kifayah. International Journal of Humanities Technology and Civilization (IJHTC), 1 (5). pp. 23-41. ISSN 2289-7216. (Published)

Abdul Rahman, Zahari (2019) Entrepreneurial intentions and capabilities on student enterprises’ performance in Malaysian higher educational institutions. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdul Rahman, Zahari and Puteri Fadzline, Muhamad Tamyez and Noor Azlinna, Azizan and Elinda, Esa (2019) The Effect of Personality Traits on the Performance of Students Enterprises. In: IEBMC 2019 9th International Economics and Business Management Conference . pp. 1-10.. ISSN 2357-1330

Abdul Rashid, Abdul Aziz and Imaduddin, Abidin (2019) Strategi merungkai permasalahan melalui kaedah TRIZ bentuk pemikiran kritis. UMP News . (Unpublished)

Abdul Razak, N. A. A. and Abdul Halim, Abdul Razik (2019) Modelling and optimization of biomass-based cogeneration plant. In: 9th International Conference on Future Environment and Energy, ICFEE 2019, 9 - 11 January 2019 , Osaka, Japan. pp. 1-8., 257 (1). ISSN 1755-1307

Abdul Razak, Raaff (2019) Kementerian teliti lebih terperinci. Berita Harian . p. 8.

Abdul Sahli, Fakharudin and N., Zainol and Noor Athirah, Dzulkefli (2019) Application of artificial neural network to improve pleurotus sp. cultivation modelling. In: Engineering Application of Artificial Intelligence Conference 2018 (EAAIC 2018), 3-5 December 2018 , Sabah, Malaysia. pp. 1-15., 255. ISSN 2261-236X

Abdul Sahli, Fakharudin and Norazwina, Zainol and Zulsyazwan, Ahmad Khushairi (2019) Modelling and optimisation of oil palm trunk core biodelignification using neural network and genetic algorithm. In: 8th International Conference on Informatics, Environment, Energy and Applications 2019, 16 - 19 March 2019 , Osaka, Japan. pp. 155-158.. ISBN 978-145036104-0

Abdul wahid, Arman and Hagos, F. Y. and Abdul Adam, Abdullah and Rizalman, Mamat and Abd Rashid, A. Aziz (2019) Syngas production through steam and CO2 reforming of methane over ni-based catalyst - technical review. In: Energy Security And Chemical Engineering Congress (ESCHE) 2019, 17 - 19 Julai 2019 , Parkroyal Resort, Penang. . (Unpublished)

Abdulbari, Hayder A. and Basheer, Esmail Abdullah Mohammed (2019) Microfluidics chip for directional solvent extraction desalination of seawater. Scientific Reports, 9 (12576). pp. 1-11. ISSN 2045-2322. (Published)

Abdulhadi, Hassan A. and Aqida, Syarifah N. and Ismail, Izwan (2019) Tool Failure in Die Casting. In: Reference Module in Materials Science and Materials Engineering. Elsevier Ltd, pp. 1-11. ISBN 978-0-12-803581-8

Abdullah, Afan Mohammed Salah (2019) The mechanical properties of concrete contains palm oil clinker as coarse aggregate replacement and pofa as cement repacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Abdullah, Arif and M. F. F., Ab Rashid and Ponnambalam, S. G. and Zakri, Ghazalli (2019) Energy efficient modeling and optimization for assembly sequence planning using moth flame optimization. Assembly Automation, 39 (2). pp. 356-368. ISSN 0144-5154. (Published)

Abdullah, Hamidah and Khan, Maksudur Rahman and Jamari, Saidatul Shima (2019) Modification of the rice husk activated carbon using chemical method as solid adsorbent for CO2 capture. , [Research Report: Research Report] (Unpublished)

Abdullah, Nasser and Kamal Z., Zamli (2019) Self-adaptive Population Size Strategy Based on Flower Pollination Algorithm for T-Way Test Suite Generation. In: Recent Trends in Data Science and Soft Computing: Proceedings of the 3rd International Conference of Reliable Information and Communication Technology (IRICT2018), 23-24 July 2018 , Kuala Lumpur, Malaysia. pp. 240-248., 843. ISBN 978-3-319-99007-1

Abdullah, Nasser and Kamal Z., Zamli (2019) A new variable strength t-way strategy based on the cuckoo search algorithm. In: Intelligent and Interactive Computing: Proceedings of IIC 2018, 8-9 August 2018 , Universiti Teknikal Malaysia Melaka (UTeM). pp. 193-203., 67. ISBN 978-981-13-6030-5

Abdullah, Nasser and Kamal Z., Zamli and B. S., Ahmed (2019) Dynamic solution probability acceptance within the flower pollination algorithm for combinatorial t-way test suite generation. In: Intelligent and Interactive Computing: Proceedings of IIC 2018, 8-9 August 2018 , Universiti Teknikal Malaysia Melaka (UTeM). pp. 3-11., 67. ISBN 978-981-13-6030-5

Abdullah, Zailani and Omer, Adam and Tutut, Herawan and Noraziah, Ahmad and Mohd Saman, Md Yazid and Hamdan, Abdul Razak (2019) 2M-SELAR: A Model for Mining Sequential Least Association Rules. In: Proceedings of the International Conference on Data Engineering (DaEng-2015), 25-26 April 2015 , Bali, Indonesia. pp. 91-99., 520. ISBN 978-981-13-1799-6

Abdullah Alsakkaf, Ahmed Mohammed (2019) The effects of different properties of limestone on the mechanical properties of adobe. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Abdulwahab, Haneen A. and Noraziah, Ahmad and Al-Sewari, Abdul Rahman Ahmed Mohammed and Salih, Sinan Q. (2019) An enhanced version of black hole algorithm via levy flight for optimization and data clustering problems. IEEE Access, 7 (8809737). pp. 142085-142096. ISSN 2169-3536. (Published)

Abdusalam, Youssif Hussin and Islam, Mir Sujaul and Karim, Md Abdul and Mg, Salah and Mohamad Idris, Ali and Noram Irwan, Ramli (2019) Assessment of water quality in the vicinity of Chini Lake, Malaysia. Bangladesh Journal of Botany, 48 (4). pp. 1037-1046. ISSN 0253-5416 (print); 2079-9926 (online). (Published)

Abhilash, K. P. and Selvin, P. Christopher and Nalini, B. and Rajan, Jose and Hui, Xia and Elim, Hendry Izaac and Reddy, M. V. (2019) Correlation study on temperature dependent conductivity and line profile along the LLTO/LFP-C cross section for all solid-state Lithium-ion batteries. Solid State Ionics, 341. pp. 1-2. ISSN 0167-2738. (Published)

Abu, Mohd Yazid Bin (2019) Develop effective decision making for remanufacturing automotive components. , [Research Report: Research Report] (Unpublished)

Abu, Noratikah and Adli Aminuddin, Adam Shariff and Mat Kasim, Maznah and Mohd Nawawi, Mohd Kamal (2019) Four types of dependence relationship in two consecutive stage data envelopment analysis model. In: AIP Conference Proceedings; 4th Innovation and Analytics Conference and Exhibition, IACE 2019, 25 - 28 March 2019 , Kedah. 020001-1., 2138 (1). ISSN 0094-243X ISBN 978-073541881-3

Abu, Noratikah and Ismail, Zuhaimy (2019) A study on private vehicle demand forecasting based on Box-Jenkins method. In: AIP Conference Proceedings; 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018, 25 - 26 July 2018 , Kuantan, Pahang. 020005-1., 2059 (020005). ISSN 0094-243X ISBN 978-073541787-8

Abu, Noratikah and Megat Muainuddin, Megat Muhammad Afif and Wan Yusoff, Wan Nur Syahidah and Ismail, Zuhaimy (2019) Ecotourism demand forecasting at National Park, Kuala Tahan, in Pahang. In: 9th Int. Conf. on Geotechnique, Construction Materials and Environment, 20 - 22 November 2019 , Hotel Continental Fuchu in Tokyo, Japan. pp. 1266-1270.. ISBN 978-4-909106025 (Submitted)

Abu Hannifa, Abdullah and Zulhelmi, Ismail and Anis Sakinah, Zainal Abidin and Kamal, Yusoh (2019) Green sonochemical synthesis of few-layer graphene in instant coffee. Materials Chemistry and Physics, 222. pp. 11-19. ISSN 0254-0584. (Published)

Abu-Samah, A. and Normy Norfiza, A. Razak and Fatanah, M. Suhaimi and Azrina, Md Ralib and Ummu Kulthum, Jamaludin (2019) Probabilistic glycemic control decision support in ICU : proof of concept using bayesian network. Jurnal Teknologi (Sciences and Engineering), 81 (2). pp. 61-69. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Abu-Samah, Asma and Knopp, Jennifer Launa and Normy Norfiza, Abdul Razak and Athirah, Abdul Razak and Ummu Kulthum, Jamaludin and Fatanah, M. Suhaimi and Azrina, Md Ralib and Mohd Basri, Mat Nor and Chase, J. Geoffrey and Pretty, Christopher G. (2019) Model-based glycemic control in a Malaysian intensive care unit: Performance and safety study. Medical Devices: Evidence and Research, 12. pp. 215-226. ISSN 1179-1470. (Published)

Abu-Samah, Asma and Normy Norfiza, Abdul Razak and Ummu Kulthum, Jamaludin and Fatanah, M. Suhaimi and Azrina, M. Ralib (2019) Determination of favorable blood glucose target range for stochastic TARgeted (STAR) glycemic control in Malaysia. Indonesian Journal of Electrical Engineering and Computer Science, 15 (1). pp. 133-141. ISSN 2502-4752. (Published)

Abulhakim, N. and Adeleke, A. Q. (2019) The Factors Contributing to Accident Occurrence on Malaysia Building Projects through Partial Least Square Structural Equation Modeling. Social Science and Humanities Journal, 3 (5). pp. 1096-1106. ISSN 2456-2653. (Published)

Abuluhoom, Waleed Mohamed Mohsen (2019) Comparison study of using different curing condition of tire powder. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Adam, A. Y. and A. N., Oumer and G., Najafi and M., Ishak and F., Basrawi and Aklilu, T. B. (2019) State of the art on flow and heat transfer performance of compact fin-and-tube heat exchangers. Journal of Thermal Analysis and Calorimetry. pp. 1-30. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Adam Shariff Adli, Aminuddin and Ku Muhammad Naim, Ku Khalif and Fadhilah, Che Jamil and Nur Izzati, Jaini (2019) Fuzzy analytic hierarchy process using intuitive vectorial centroid for eco-friendly car selection. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019), 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 1366 (012076). ISSN 1742-6596

Adam Shariff Adli, Aminuddin and Mohd Kamal, Mohd Nawawi (2019) A knowledge based fuzzy analytic network process for sustainable manufacturing indicator. In: International Conference on Business, Big-Data, and Decision Sciences (ICBBD) 2019, 22-24 August 2019 , Tokyo University of Science, Kagurazaka Campus, Fujimi Building. pp. 1-9.. (Unpublished)

Addie Irawan, Hashim and Mohammad Fadhil, Abas and Nurulfadzilah, Hassan (2019) Robot Local Network Using TQS Protocol for Land-to-Underwater Communications. Journal of Telecommunications and Information Technology, 1 (1). pp. 23-30. ISSN 1509-4553 (print); 1899-8852 (online). (Published)

Adeleke, A. Q. and Bahaudin, A. Y. and Kamaruddeen, A. M. and Bamgbaded, J. A. and M., Waris and Panda, Sitansu and Afolabi, Yakibi Ayodele (2019) An Empirical Analysis of Organizational External Factors on Construction Risk Management. International Journal of Supply Chain Management (IJSCM), 8 (1). pp. 932-940. ISSN 2050-7399 (Online). (Published)

Adeleke, A. Q. and Bamgbaded, J. A. and Salimon, Maruf Gbadebo and Lee, Chia Kuang (2019) Project management performance and its influence on Malaysian building projects. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 313-329., 2019. ISSN 2518-668X

Adeleke, A. Q. and Sorooshian, Shahryar and Yao, Liu and Nawanir, Gusman and Azi Izwani, Nor Hamzah (2019) The influence of organizational factors on construction risk among Malaysian construction industries. , [Research Report: Research Report] (Unpublished)

Adiza, Jamadin and Zainah, Ibrahim and Mohd Zamin, Jumaat and Ezahtul Shahreen, Ab Wahab (2019) Effect of high-cyclic loads on dynamic response of reinforced concrete slabs. KSCE Journal of Civil Engineering, 23 (3). pp. 1293-1301. ISSN 1226-7988 (Print); 1976-3808 (Online). (Published)

Adzmi, M. A. and Abdul Adam, Abdullah and Abdullah, Z. and Mrwan, Anes G. (2019) Effect of Al2O3 and SiO2 metal oxide nanoparticles blended with POME on combustion, performance and emissions characteristics of a diesel engine. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6859-6873. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Afidatusshimah, Mazlan (2019) Correlation of welding current waveform with welding conditionbased on exploratory data analysis (EDA). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daniyal, Hamdan).

Afiqah, R. Radzi and Hashim, R. Bokhari and Abdul Rahimi, Abdul Rahman and K. Ayer, Steven (2019) Key Attributes of Change Agents for Successful Technology Adoptions in Construction Companies: A Thematic Analysis. ASCE International Conference on Computing in Civil Engineering 2019. pp. 430-437. (Published)

Afiqah, Yeop and Jessinta, Sandanasamy and Pang, Sook Fun and Sureena, Abdullah and Mashitah, Mohd Yusoff and Jolius, Gimbun (2019) Extraction and identification of bioactive compounds from L. pumila. Journal of Engineering and Science Research, 3 (3). pp. 1-5. ISSN 2289-7127. (Published)

Afiqah, Yeop and Pang, Sook Fun and Law, Woon Phui and M. M., Yusoff and Jolius, Gimbun (2019) Assessment of Size Reduction and Extraction Methods on the Yield of Gallic Acid from Labisia pumila Leaf via Microstructures Analysis. Materials Today: Proceedings, 19. 1280 - 1286. ISSN 2214-7853. (Published)

Afiqah, Yeop and Pang, Sook Fun and M. M., Yusoff and Sureena, Abdullah and Jolius, Gimbun (2019) POCER1914: Elucidation of Gallic Acid Degradation Pathway from Labisia Pumila via Mass Spectroscopy Technique. In: Proceedings of the 5th Postgraduate Colloquium for Environmental Research (POCER 2019), 8-9 August 2019 , Putrajaya, Malaysia. pp. 36-38., 8. ISBN 978-967-11279-6-4

Afnan, Sh. Ahmed and Muhammad, Taher and Mandal, Uttam K. and Juliana, Md Jaffri and Deny, Susanti and Mahmood, Syed and Zainul Amiruddin, Zakaria (2019) Pharmacological properties of centella asiatica hydrogel in accelerating wound healing in rabbits. BMC Complementary and Alternative Medicine, 19 (1). pp. 1-7. ISSN 1472-6882. (Published)

Ag Ku Afiq Ikhwan, Ag Jaafar (2019) Utilization of oil palm frond (OPF) as a partial replacement of sand in cement sand brick for non-load bearing structure. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aghasiloo, Peyman and Yousefzadeh, Maryam and Latifi, Masoud and Rajan, Jose (2019) Highly porous TiO2 nanofibers by humid-electrospinning with enhanced photocatalytic properties. Journal of Alloys and Compounds, 790. pp. 257-265. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Agila, Sivan (2019) Online grocery shopping application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad, Asnul Hadi and Ishak, M. and Rashidi, Maarof Mohd and Zakri, Ghazali (2019) Investigation of thixoforming process to enhance mechanical properties for automotive components production. , [Research Report: Research Report] (Unpublished)

Ahmad, Asnul Hadi and Zakri, Ghazali and Romlay, Fadhlur Rahman Mohd and Nik Mohamed, Nik Mohd Zuki and Rashidi, Maarof Mohd and Ishak, M. (2019) Development of a high temperature viscometer for semisolid metal processing. , [Research Report: Research Report] (Unpublished)

Ahmad, Hussain and Shah, Sayyed Rashid and Fatmawati, Latada and Muhammad Nubli, Abdul Wahab (2019) Teacher Identity Development in Professional Learning: An Overview of Theoretical Frameworks. Bulletin of Advance English Studies, 3 (1). pp. 1-11. ISSN 2617-6459. (Published)

Ahmad, Iftikhar (2019) EFL teacher cognition in grammar teaching: an investigation in the Saudi Arabian bilingual educational context at university level. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad, M. S. (2019) Glycerol waste valorization to mesoxalic acid over a bimetallic Pt-Pd/CNT catalyst in alkaline medium. Journal of Nanoscience and Nanotechnology. pp. 1-29. ISSN 1533-4880 (Print); 1533-4899 (Online). (Submitted) (Submitted)

Ahmad, M. S. and Cheng, C. K. and Ong, Huei Ruey and Abdullah, H. and Khan, Maksudur R. (2019) Electro-oxidation of renewable glycerol to value added chemicals over phosphorous-doped Pt/MCNTs nanoparticles. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-12., 702 (012025). ISSN 1757-899X

Ahmad, M. S. and Cheng, C. K. and Ong, Huei Ruey and Hamidah, Abdullah and Hong, Chi Shein and Chua, Gek Kee and Mishra, Puranjan and Khan, Maksudur R. (2019) Electro-oxidation of waste glycerol to tartronic acid over Pt/CNT nanocatalyst: study of effect of reaction time on product distribution. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. pp. 1-18. ISSN 1556-7036 (Print); 1556-7230 (Online). (In Press / Online First) (In Press / Online First)

Ahmad, Nafees and Ruwaida, Abdul Rasid (2019) Study of natural gas powered solid oxide fuel cell simulation and modeling. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-17., 702 (012017). ISSN 1757-8981

Ahmad, Waqar and Zuraina, Ali (2019) Interactive whiteboard (IWB) effectiveness in vocabulary achievement and motivation: Saudi EFL Learners’ Perceptions and Insights. Bulletin of Advance English Studies, 2 (2). pp. 90-103. ISSN 2617-6459. (Published)

Ahmad Aiman Ariff, Ahmad Zamri (2019) Predicament in construction – an overlook to delays, cost overruns and risks. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Amiruddin Almukhtar, Kamarudin (2019) An improved segmentation method for lung cancer detection. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad Atif, Adzman (2019) Strategies to measure progress and productivity in model-based construction projects. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Azwan, Abdul Razak (2019) Multi-objective spiral dynamic algorithms-based for a better accuracy and diversity. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Nor Kasruddin, Nasir).

Ahmad Azwan, Abdul Razak and Ahmad Nor Kasruddin, Nasir and Mohd Falfazli, Mat Jusof and Shuhairie, Mohammad and Nurul Amira, Mhd Rizal (2019) Opposition based Spiral Dynamic Algorithm with an Application to a PID Control of a Flexible Manipulator. In: 9th IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2019), 29 November - 1 December 2019 , Penang, Batu Ferringhi. pp. 126-130. (19533470). ISBN 978-1-7281-3500-7

Ahmad Fadzil, Sharol and Amir, Abdul Razak and Zafri Azran, Abdul Majid and Ahmad, Fudholi (2019) Experimental study on performance of square tube absorber with phase change material. International Journal of Energy Research, 44 (2). pp. 1000-1011. ISSN 0363-907X (print); 1099-114X (online). (Published)

Ahmad Faizrin, Ahmad Fuzlin and Noor Syahida, Ismail and Nagao, Yuki and Ahmad Salihin, Samsudin (2019) Electrical Properties of A Novel Solid Biopolymer Electrolyte based on Algi-nate Incorporated with Citric Acid. Makara Journal of Technology, 23 (1). pp. 48-52. ISSN 2355-2786. (Published)

Ahmad Fakhri, Ab. Nasir and Ahmad Shahrizan, Abdul Ghani and Muhammad Aizzat, Zakaria and Anwar, P. P. Abdul Majeed and Ahmad Najmuddin, Ibrahim (2019) Automated Face Detection Using Skin Color Segmentation and Viola-Jones Algorithm. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 58-63. ISSN 2637-0883. (Published)

Ahmad Fathiey, Razali (2019) A laboratory study of electrical resistivity and consolidation properties of Kuantan bauxite deposits. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Fauzi, Fudzin and Ainul Akmar, Mokhtar and Mohd Amin, Abd Majid and Azizul Qayyum, Basri (2019) Analytical hierarchy process application of body in white modular sub-assembly for automotive manufacturing in Malaysia - A case study. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012004). ISSN 1757-899X

Ahmad Fikri Hadi, Abdul Rahman (2019) Membrane surface modification via ultraviolet-photografting for forward osmosis. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mazrul Nizam, Abu Seman).

Ahmad Fikri Hadi Abdul, Rahman and Mohd Yusri, Mohd Yunus and Tengku Siti Laila Maisarah, Tengku Ahmad Nasaruddin and Noorlisa, Harun and Mazrul Nizam, Abu Seman (2019) Performance profiling of UV-grafted forward osmosis polyethersulfone membrane using multivariate classical scaling technique. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012043). ISSN 1757-8981

Ahmad Firdaus, Ahmad Asri (2019) Finite element analysis of square tubular T-joints under static loadings. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Firdaus, Zainal Abidin and Mohd Faaizie, Darmawan and Mohd Zamri, Osman and Shahid, Anwar and Shahreen, Kasim and Yunianta, Arda and Sutikno, Tole (2019) Adaboost-multilayer perceptron to predict the student’s performance in software engineering. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1556-1562. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Ahmad Hafizi, Awang and Abdul Halim, Abdul Razik and Azuin, Mad Noor and Aainaa Izyan, Nafsun (2019) Modelling and optimization of torrefied pellet fuel production. Pertanika Journal of Science & Technology (JST), 27 (4). pp. 2139-2152. ISSN 0128-7680. (Published)

Ahmad Huzaimi, Abd Jamil and Mohamad Syazli, Fathi (2019) Contractual issues for building information modelling (BIM)-based construction projects: An exploratory case study. In: IOP Conference Series: Materials Science and Engineering, 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 November 2018 , Langkawi, Malaysia. pp. 1-9., 513 (012035). ISSN 1757-8981 (Print), 1757-899X (Online)

Ahmad Irfan, Ikmal Hisham (2019) Adab dengan guru jaminan keberkatan ilmu. Kosmo . p. 1.

Ahmad Irfan, Ikmal Hisham (2019) Bumi datar vs bumi sfera: pandangan ahli tafsir. Jurnal Falak, 5. pp. 7-43. ISSN 2462-1765. (Published)

Ahmad Irfan, Ikmal Hisham (2019) Cerap anak bulan dorong kajian ilmiah. Berita Harian . p. 48.

Ahmad Irfan, Ikmal Hisham (2019) Fahami evolusi penentuan arah kiblat. Berita Harian . p. 68.

Ahmad Irfan, Ikmal Hisham (2019) Isytihar perubahan waktu solat perlu seragam. Berita Harian . p. 59.

Ahmad Irfan, Ikmal Hisham (2019) Memuliakan guru di era pendidikan abad ke-21. UMP News .

Ahmad Irfan, Ikmal Hisham (2019) Panduan azimuth penentu arah kiblat. Harian Metro . p. 19.

Ahmad Irfan, Ikmal Hisham (2019) Usah sahur hingga azan berkumandang. Berita Harian . p. 84.

Ahmad Irfan, Ikmal Hisham (2019) Waspada dalam berinteraksi dengan hadis. Harian Metro .

Ahmad Izul Fakhruddin, Azimi and Norazaliza, Mohd Jamil (2019) Nonlinear partial differential equations model related to ethanol production. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019), 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-12., 1336 (012051). ISSN 1742-6588

Ahmad Izzat Asyraf, Yusof (2019) The effectiveness of gabion type retaining wall made of tire buffer to mitigate slope failure. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Kamal, Kunji (2019) A study on Malaysian roadside safety adopting safety recovery zone corridor concept. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kusbiantoro, Andri).

Ahmad Mahfuz, Gazali and Näntö-Salonen, Kirsti and Rintamäki, Reeta and Pihlajamäki, Jussi and Knip, Mikael and Veijola, Riitta and Toppari, Jorma and Ilonen, Jorma and Kinnunen, Tuure (2019) Altered Mucosal-Associated Invariant T Cells Phenotype in Children with Newly Diagnosed Type 1 Diabetes but not in Autoantibody-Positive At-Risk Children. Malaysian Journal of Medicine and Health Sciences: Proceedings of the 2nd ICOMOI 2019, 15 (Supplement 8). p. 19. ISSN 2636-9346. (Published)

Ahmad Najmuddin, Ibrahim and Fukuoka, Yasuhiro and Siti Suhaila, Sabarudin (2019) Effects of Wheel Grouser Angle of Attack on Simulated Robot Wheel Performance on Soft Sand with High Slip Condition. In: IEEE 4th International Conference on Advanced Robotics and Mechatronics (ICARM 2019), 3-5 July 2019 , Osaka University, Japan. pp. 1-6.. (Unpublished)

Ahmad Nasser, Mohd Rose and N. M. Z., Nik Mohamed and M. F. F., Ab Rashid and Hafizzudin, Mohd Noor and Alias, Mohd (2019) Improving productivity using value stream mapping (VSM) - a case study. In: 4th International Conference on Engineering Technology (ICET 2019), 6-7 July 2019 , DITC, Kemaman, Terengganu. pp. 1-5.. (Unpublished)

Ahmad Nazrie, Mohd Nor and T., Senthil Kumar (2019) The Chronology of Microfinance Development in Malaysia: A Review. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1271-1284., 2019. ISSN 2518-668X

Ahmad Nazrie, Mohd Nor and T., Senthil Kumar (2019) The chronology of microfinance development in Malaysia : a review. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1271-1284., 2019. ISSN 2518-668X

Ahmad Qusyairi, Ahmad Kamarulzaman (2019) Student attendance system using QR code. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad Razlan, Yusoff and Syh Kai, Lim (2019) Microstructure and mechanical properties of boron sheet metal steels in hot press forming process with nanofluid as coolant. In: Reference Module in Materials Science and Materials Engineering. Elsevier, pp. 1-15. ISBN 978-0-12-803581-8

Ahmad Ridhwan, Ahmad Faisal (2019) Study of potential palm acid oil (PAO) from sludge palm oil mill effluent (POME) as goat’s feed. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Rifqi, Mohd Jerome Rinjes (2019) Lakaran sejarah baharu MPP tingkat pemerkasaan mahasiswa UMP. UMP News . (Unpublished)

Ahmad Safuan, Mohamed Ramli (2019) UMP E-Saman by using QR code system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad Shahrizan, Abdul Ghani and Ahmad Fakhri, Ab. Nasir (2019) Superposition of dual image fusion with improved dehazing methods for high visibility of underwater image. In: The 17th IEEE International Conference On Pervasive Intelligence And Computing (PICOM 2019), 3 - 9 Ogos 2019 , Fukoaka, Japan. pp. 1-6.. ISBN 978-1-7281-3025-5 (Print); 978-1-7281-3024-8 (Online)

Ahmad Shahrizan, Abdul Ghani and Ahmad Fakhri, Ab. Nasir and Muhammad Aizzat, Zakaria and Ahmad Najmuddin, Ibrahim (2019) Modification of Lab color model for minimizing blue-green illumination of underwater vision system. In: 25th International Conference on Mechatronics and Machine Vision in Practice, M2VIP 2018, 3 January 2019 . pp. 1-7.. ISBN 978-153867544-1

Ahmad Taqiyuddin, Mohamad (2019) Smart blinkers speed humps using solar panel. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Ahmad Zairi, Mohd Zain and Mohd Ashraf, Ahmad (2019) A salp swarm algorithm to improve power production of wind plant. In: International Conference on Electrical, Control and Computer Engineering 2011 (InECCE 2011)., 21-22 June 2011 , Hyatt Regency, Kuantan, Pahang, Malaysia. pp. 1-7.. (Unpublished)

Ahmed, Abdulghani Ali (2019) Botnet Detection Using a Feed-Forward Backpropagation Artificial Neural Network. In: Computational Intelligence in Information Systems: Proceedings of the Computational Intelligence in Information Systems Conference (CIIS 2018), 16-18 November 2018 , Brunei. pp. 24-35., 888. ISBN 978-3-030-03302-6

Ahmed, Bestoun S. and Gargantini, Angelo and Kamal Z., Zamli and Yilmaz, Cemal and Bures, Miroslav and Szeles, Marek (2019) Code-aware combinatorial interaction testing. IET Software, 13 (6). pp. 600-609. ISSN 1751-8814. (Published)

Ahmed, Ehab Ali (2019) Water level forecasting using feed forward neural networks optimized by African Buffalo Algorithm (ABO). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmed, Firas D. and Mazlina, Abdul Majid (2019) Towards agent-based petri net decision making modelling for cloud service composition: A literature survey. Journal of Network and Computer Applications, 130. pp. 14-38. ISSN 1084-8045. (Published)

Ahmed, Hussam Alddin Shihab (2019) Designing substitution boxes based on chaotic map and globalized firefly algorithm. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zolkipli, Mohamad Fadli).

Ahmed, Mohammed Ragab and A. R., Yusoff and F. R. M., Romlay (2019) Adjustable Valve Semi Active Suspension System for Passenger Car. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6470-6481. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahmed Al-Hamed, Ahmed Hasan (2019) Effect of recycled aggregate concrete with glass fiber on concrete properties. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmed Alburaiki, Abdulaziz Salem (2019) The effect of different percentages of kenaf on the mechanical properties of adobe. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmed Mostafa, Mohammed Ragab (2019) Investigation of adjustable valve of semi-active damper for improving ride comfort in a passenger car. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmed Zainul, Abideen and Fazeeda, Mohamad (2019) Empowering supply chain through discrete-event and agent-based simulation – A systematic review and bibliometric analysis. In: 2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies, CSUDET 2019, 7-9 November 2019 , Penang. pp. 69-74. (9214764). ISBN 978-172813276-1

Ahmed Zainul, Abideen and Fazeeda, Mohamad (2019) Improving pharmaceutical warehouse supply chain lead time – From production to cross-docking. In: 2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies, CSUDET 2019;, 7-9 November 2019 , Penang. pp. 63-68. (9214732). ISBN 978-172813276-1

Ahmed Zainul, Abideen and Fazeeda, Mohamad (2019) Supply chain lead time reduction in a pharmaceutical production warehouse – a case study. International Journal of Pharmaceutical and Healthcare Marketing, 14 (1). pp. 61-88. ISSN 1750-6123. (Published)

Ahmedov, Anvarjon A. and Matarneh, Ehab and Mohammad Hasan, Abd Sathar (2019) On the generalized radimacher-menchoff theorem for general spectral decomposition of the elliptic differential operators. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019), 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-10., 1366 (012067). ISSN 1742-6596

Ahmedov, Anvarjon A. and Turmetov, Batirkhan and Siti Fatimah, Hj Ahmad Zabidi (2019) Solving boundary problems for biharmonic operator by using Integro-differential operators of fractional order. In: 14th International Symposium on Geometric Function Theory and Applications, GFTA 2018, 3 - 5 December 2018 , Puri Pujangga Hotel, Universiti Kebangsaan Malaysia, Selangor, Malaysia. pp. 1-9., 1212 (012021). ISSN 1742-6588 (print); 1742-6596 (online)

Aida Zahirah, Zurhaini (2019) The development of intensity duration frequency (IDF) curves in Gombak. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aiman Awadh Saleh, Mokaizh and Nurdiana, Wirman and Jun Haslinda, Shariffuddin (2019) Synthesis of alumina from aluminium can waste to be applied as catalyst support for biodiesel production. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-12., 702 (012038). ISSN 1757-8981

Aimi Asyiqin, Abu Kassim and Norhayati, Abdullah and Mohammad Zuhaili, Yahya (2019) The Pre-Evaluation of Crosslinked Anion Exchange (CAX) Resin on Nitrates Removal. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 5 (2). pp. 1-8. ISSN 0126-8139. (Published)

Aimi Zafirah, Abd Rahim (2019) The characterization and antioxidant activity of chitosan-alginate nanoparticles encapsulating cymbopogon citratus and cymbopogon nardus aqueous extracts. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Ainun Syahirah, Adnan (2019) Enhancing generic code clone detection model for C based application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and Akira, Hosokawa and Furumoto, Tatsuaki and Mohd Shahril, Osman (2019) Bold approach in finite element simulation on minimum quantity lubrication effect during machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 33-41. ISSN 2636-9575. (Published)

Aisha, Muhammad and Ali, Mohammed A. H. and Haruna, Shanono Ibrahim (2019) Structural analysis of a diesel engine connecting rod using four different materials. In: 1st International Conference On Mechatronics, Automation And Cyber-Physical Computer Systems (MAC-2019), 7 March 2019 , Federal University of Technology Owrrie Nigeria. pp. 1-8.. (Unpublished)

Aishah, A. F. Q. A. and Ummu Kulthum, Jamaludin and Zainuriah, M. R. and Norhilda, A. K. (2019) Multiple linear regression model analysis in predicting fasting blood glucose level in healthy subjects. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-10., 469 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Aishah, Abdul Aziz and Wan Muhammad Noor Sarbani, Mat Daud and Sorooshian, Shahryar (2019) Exploring quality influencing factors for frozen food industry. In: IOP Conference Series: Materials Science and Engineering; 4th International Conference on Ergonomics and 2nd International Conference on Industrial Engineering, ICE and ICIE 2019, 27 - 28 August 2019 , Kuala Terengganu, Terengganu. pp. 1-6., 697 (1). ISSN 1757-8981

Aisyah Aqilah, Akmal (2019) Investigation on mechanical properties of lightweight aggregate concrete containing coal ASH as partial sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Akbari, Sweeta and Nour, A. H. and R. M., Yunus (2019) Optimization of saponins, phenolics, and antioxidants extracted from fenugreek seeds using microwave-assisted extraction and response surface methodology as an optimizing tool. Comptes Rendus Chimie. pp. 1-14. ISSN 1631-0748. (In Press / Online First) (In Press / Online First)

Akbari, Sweeta and Nour, A. H. and R. M., Yunus and Alara, Oluwaseun Ruth and Abayomi, Olalere Olusegun (2019) Extraction, characterization and antioxidant activity of fenugreek (Trigonella-Foenum Graecum) seed oil. Materials Science for Energy Technologies, 2 (2). pp. 349-355. ISSN 2589-2991. (Published)

Akbari, Sweeta and Nour, A. H. and R. M., Yunus and Fayaz, Fahim (2019) Microwave-assisted extraction of saponin, phenolic and flavonoid compounds from Trigonella foenum-graecum seed based on two level factorial design. Journal of Applied Research on Medicinal and Aromatic Plants, 14 (100212). pp. 1-10. ISSN 2214-7861. (Published)

Akhyari, Nasir (2019) A dimension-based information security culture model for information security policy compliance behavior in Malaysian public universities. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ruzaini, Abdullah Arshah).

Akhyari, Nasir and Ruzaini, Abdullah Arshah and Ab Hamid, Mohd Rashid (2019) A dimension-based information security culture model and its relationship with employees’ security behavior: A case study in Malaysian higher educational institutions. Information Security Journal, 28 (3). pp. 55-80. ISSN 1939-3555. (Published)

Akhyari, Nasir and Ruzaini, Abdullah Arshah and M. R., Abdul Hamid (2019) An analysis on the dimensions of information security culture concept: A review. Elsevier Journal of Information Security and Applications, 44. pp. 12-22. ISSN 2214-2126. (Published)

Akid Afnand, Abdullah (2019) Development of rainfall temporal patern in Universiti Malaysia Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and Heim, Hans P. and Feldmann, Maik and Mariatti, M. (2019) Oxidative induction and performance of oil palm fiber reinforced polypropylene composites - effects of coupling agent and UV stabilizer. Composites Part A: Applied Science and Manufacturing, 125 (105577). ISSN 1359-835X. (Published)

Akkharaphatthawon, Naphattanun and Chanlek, Narong and Cheng, C. K. and Chareonpanich, Metta and Limtrakul, Jumras and Witoon, Thongthai (2019) Tuning adsorption properties of GaxIn2−xO3 catalysts for enhancement of methanol synthesis activity from CO2 hydrogenation at high reaction temperature. Applied Surface Science, 489. pp. 278-286. ISSN 0169-4332. (Published)

Aklilu, T. B. and Kar, Kin Looi and A. N., Oumer and Khairul, Habib (2019) Thermoelectric Air-Conditioning System: Building Applications and Enhancement Techniques. International Journal of Air-Conditioning and Refrigeration, 27 (2). pp. 1-17. ISSN 2010-1333. (Published)

Akram, A. and Hasanuddin, Iskandar and Nazaruddin, N. and Putra, R. and M. M., Noor (2019) Mechanical behavior of hybrid glass Fiber-Jute reinforced with polymer composite for the wall of the Acehnese boat 'Jalo Kayoh'. In: IOP Conference Series: Materials Science and Engineering, The 8th Annual International Conference (AIC) 2018 on Science and Engineering, 12-14 September 2018 , Aceh, Indonesia. pp. 1-7., 523 (012076). ISSN 1757-8981 (Print), 1757-899X (Online)

Al Aidaros, Hussein Ali Hasan (2019) Colour texture image classification using colour completed local binary pattern (CCLBP). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Al Ariqi, Hani Taha and Jabbar, Waheb A. and Hashim, Yasir and Hadi, Manap (2019) Characterization of silicon nanowire transistor. Telkomnika, 17 (6). pp. 2860-2866. ISSN 1693-6930. (Published)

Al Sayaydeh, Osama Nayel and Mohammed, Mohammed Falah (2019) A new EFMM-OneR hybrid model for diagnosing parkinson's disease. In: 2nd International Conference on Advanced Science and Engineering 2019 (ICOASE2019), 2-4 April 2019 , Duhok, Kurdistan Region-Iraq. pp. 1-6.. (Submitted)

Al Sayaydeh, Osama Nayel Ahmad (2019) Modern fuzzy min max neural networks for pattern classification. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohammad Falah, Mohammad).

Al-Amshawee, Sajjad and Mohd Yusri, Mohd Yunus (2019) Influence of light emitting diode (LED) on microalgae. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 5 (2). pp. 9-16. ISSN 0126-8139. (Published)

Al-Bashiri, Hael Abdullah Hussein (2019) A proposed memory-based collaborative filtering technique based on a new similarity and MADM methods (CF-NSMA) for improving the recommendation accuracy. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdulgabber, Mansoor Abdullateef).

Al-Emran, Mostafa and Alkhoudary, Yahya Ashour M. and Mezhuyev, Vitaliy and Al-Emran, Mohammed (2019) Students and educators attitudes towards the use of M-learning: gender and smartphone ownership differences. International Journal of Interactive Mobile Technologies (iJIM), 13 (1). pp. 127-135. ISSN 1865-7923. (Published)

Al-Emran, Mostafa and Mezhuyev, Vitaliy (2019) Examining the effect of Knowledge Management factors on Mobile Learning adoption through the use of Importance-Performance Map Analysis (IPMA). In: 5th International Conference On Advanced Intelligence Systems And Informatics (AISI2019), 26-28 October 2019 , Cairo, Egypt. pp. 1-2..

Al-Emran, Mostafa and Mezhuyev, Vitaliy and Adzhar, Kamaludin (2019) PLS-SEM in Information Systems Research: A Comprehensive Methodological Reference. In: Proceedings of the International Conference on Advanced Intelligent Systems and Informatics 2018: AISI 2018. Advances in Intelligent Systems and Computing, 845 . Springer Nature, Switzerland, pp. 644-653. ISBN 978-3-319-99010-1

Al-Emran, Mostafa Nadhir Hassan (2019) Extending the technology acceptance model with knowledge management factors to examine the acceptance of mobile learning. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Al-Fasih, Mohammed Yahya Mohammed and Mohd Haziman, Wan Ibrahim and Nurul Fasihah, Basirun and Putra Jaya, Ramadhansyah and Mohd Syahrul Hisyam, Mohd Sani (2019) Influence of Partial Replacement of Cement and Sand with Coal Bottom Ash on Concrete Properties. International Journal of Recent Technology and Engineering, 8 (3S3). pp. 356-362. ISSN 2277-3878. (Published)

Al-Haimi, Basheer Mohammed Mohammed (2019) Strategies for building world-class universities in Yemen with specific reference to the Malaysian experience. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Al-Khaleefa, Ahmed Salih and Mohd Riduan, Ahmad and Azmi Awang, Md Isa and Al-Saffar, Ahmed Ali Mohammed and Mona Riza, Mohd Esa and Reza Firsandaya, Malik (2019) MFA-OSELM algorithm for WiFi-based indoor positioning system. Information (Switzerland), 10 (4). pp. 1-20. ISSN 2078-2489. (Published)

Al-Khaleefa, Ahmed Salih and Mohd Riduan, Ahmad and Azmi Awang, Md Isa and Mona Riza, Mohd Esa and Al-Saffar, Ahmed Ali Mohammed and Hassan, Mustafa Hamid (2019) Feature Adaptive and Cyclic Dynamic Learning Based on Infinite Term Memory Extreme Learning Machine. Applied Sciences, 9 (5). pp. 1-17. ISSN 2076-3417. (Published)

Al-Muhaimin, Ali (2019) 555 athletes converged on UMP-Excella International Indoor Archery Championships 3.0. UMP News . (Unpublished)

Al-Omoush, A.A. and Alsewari, Abdulrahman A. and Alamri, Hammoudeh S. and Kamal Z., Zamli (2019) Comprehensive review of the development of the harmony search algorithm and its applications. IEEE Access, 7. pp. 14233-14245. ISSN 2169-3536. (Published)

Al-Qaysi, Noor and Mohamad-Nordin, Norhisham and Al-Emran, Mostafa and Al-Sharafi, Mohammed A. (2019) Understanding the differences in students' attitudes towards social media use: A case study from Oman. In: 17th IEEE Student Conference on Research and Development, SCOReD 2019, 15-17 October 2019 , Perak, Malaysia. pp. 176-179. (8896251). ISBN 978-1-7281-2613-5

Al-Sharafi, Mohammed A. and Mufadhal, Mokhtar Esmail and Noor Azida, Sahabudin and Ruzaini, Abdullah Arshah (2019) The Acceptance of Online Social Networks as a Technology-Based Education Tools among Higher Institutes Students: A Structural Equation Modeling Approach. Scientia Iranica, 26. pp. 136-144. ISSN 2345-3605. (Published)

Al-Sharafi, Mohammed A. and Mufadhal, Mokhtar Esmail and Noor Azida, Sahabudin and Ruzaini, Abdullah Arshah (2019) Acceptance of online social networks as technology-based education tools among higher institution students: structural equation modeling approach. Scientia Iranica, 26 (1). pp. 136-144. ISSN 1026-3098. (Published)

Al-Sharafi, Mohammed A. and Ruzaini, Abdullah Arshah and Abu-Shanab, Emad A. (2019) Questionnaire Development Process to Measure the SMEs' Continuous Use behavior towards Cloud Computing Services. In: ICSCA '19: Proceedings of the 2019 8th International Conference on Software and Computer Applications, 19-22 February 2019 , Penang, Malaysia. pp. 50-55.. ISBN 978-1-4503-6573-4

Al-Sharafi, Mohammed A. and Ruzaini, Abdullah Arshah and Abu-Shanab, Emad A. and Alajmi, Qasim (2019) The effect of sustained use of Cloud-Based Business Services on organizations' performance: Evidence from SMEs in Malaysia. In: 5th International Conference On Information Management (ICIM 2019), 24-17 Mac 2019 , Cambridge, United Kingdom. pp. 285-291.. ISBN 978-1-7281-3430-7

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod (2019) Voltage Sag Detection in Grid-Connected Photovoltaic Power Plant for Low Voltage Ride-Through Control. Recent Advances in Electrical & Electronic Engineering, 12. pp. 1-9. ISSN 2352-0973. (Published)

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod and Blaabjerg, Frede and Yang, Yongheng (2019) Fault ride-through control of grid-connected photovoltaic power plants: A review. Solar Energy, 180. pp. 180-190. ISSN 0038-092X. (Published)

Al-Shetwi, Ali Qasem Saleh (2019) Design and control of large-scale grid-connected photovoltaic power plant with fault ride-through. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sujod, Muhamad Zahim).

Al-haimi, Basheer and Daing Mohd Nasir, Ibrahim and Ab Hamid, Mohd Rashid (2019) Building world class universities in Yemen: exploring Yemeni higher education expert’s perceptions and thoughts. International Journal of Recent Technology and Engineering, 8 (2S9). pp. 455-460. ISSN 2277-3878. (Published)

Al-haimi, Basheer and Daing Nasir, Ibrahim and Ab Hamid, Mohd Rashid (2019) Replicating Malaysian Model of Building World-Class Universities Across Yemen. In: Advancements in Global Business Research Across Emerging Countries: Monograph Book. McGraw Hill Education (India) Private Limited, India, pp. 294-312. ISBN 978-93-5316-740-0

Al-haimi, Basheer and Daing Nasir, Ibrahim and Ab Hamid, Mohd Rashid (2019) An investigation of the current autonomy status of the Malaysian public and private universities: an empirical result. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 347-367.. ISSN 2518-668X

Al-maamari, Azzat Esam Abdulqader and Iqbal, AKM Asif and Nuruzzaman, D. M. (2019) Wear and mechanical characterization of Mg-Gr self-lubricating composite fabricated by mechanical alloying. Journal of Magnesium and Alloys, 7 (2). pp. 283-290. ISSN 2213-9567. (Published)

AlAriqi, Hani Taha and Jabbar, Waheb A. and Hashim, Yasir and Hadi, Manap (2019) Temperature characteristics of silicon nanowire transistor depending on oxide thickness. Journal of Nano- and Electronic Physics, 11 (3). pp. 1-4. ISSN 2077-6772. (Published)

AlAriqi, Hani Taha and Jabbar, Waheb A. and Hashim, Yasir and Hadi, Manap (2019) Temperature sensitivity of silicon nanowire transistor based on channel length. In: IEEE 8th International Conference On Modeling Simulation And Applied Optimization (ICMSAO 2019), 15-17 April 2019 , University of Bahrain, Bahrain. pp. 1-4.. ISBN 978-1-5386-7684-4

Alaa A., Alomoush and Mohammed I., Younis and Khalid S., Aloufi and Alsewari, Abdulrahman A. and Kamal Z., Zamli (2019) Pressure vessel design simulation using hybrid harmony search algorithm. In: European Symposium on Computer and Communications (ESCC 2019), 20 - 23 Nov. 2019 , EISTI, Paris. pp. 37-41..

Alaeddin, Omar and Thabet, Wael M. and Thabet, Ahmed A. S. and Nurmukhamedov, Bakhodir (2019) Profitability and risk in relation to credit monitoring and recovery strategies of Palestinian commercial banking system. Humanities and Social Sciences Reviews, 7 (2). pp. 389-395. ISSN 2395-6518. (Published)

Alagorni, Abubaker H. and Zulkefli, Yaacob and Nour, A. H. and Radzuan, Junin (2019) Effect of Water Alternating Gas (WAG-N2 ) after Water or Gas Flooding on Crude Oil Recovery in Sandstone Reservoirs. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress, 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-15., 736 (022015). ISSN 1757-899X

Alagorni, Abubaker Hamza (2019) Experimental performance of selective simultaneous water alternating nitrogen (SSWAG-N2) technique for oil recovery in sandstone and carbonate. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Alajmi, Qasim and Al-Nuaimy, Louay A. and Arul Jose, G. Jai and Mastan, Mohammed and Al-Sharafi, Mohammed Ali (2019) Cloud computing services and its Effect on tertiary education : Using google classroom. In: 2019 7th International Conference on ICT and Accessibility, ICTA 2019; 7th International Conference on ICT and Accessibility, ICTA 2019, 13-15 December 2019 , Hammamet. pp. 1-3. (9144797). ISBN 978-172816183-9

Alam, Shamsun and Mina, Md. Forhad and Rahman, M. J. and Gafur, Md. Abdul and Maria, K. H. and Mieno, T. and Alam, A. K. M. Moshiul and Beg, M. D. H. (2019) Effects of micrometre-sized graphite flake to reinforce the performances of poly (lactic acid) thermoplastic biocomposites. Polymers and Polymer Composites, 27 (1). pp. 20-32. ISSN 0967-3911. (Published)

Alamri, Hammoudeh S. and Kamal Z., Zamli (2019) PMT: opposition-based learning technique for enhancing meta-heuristic performance. IEEE Access, 7 (8746627). pp. 97653-97672. ISSN 2169-3536. (Published)

Alamri, Hammoudeh S. and Zamli, Kamal Z. and Ahmad Firdaus, Zainal Abidin and Mohd Faizal, Ab Razak (2019) Solving 0/1 Knapsack Problem using Opposition-based Whale Optimization Algorithm (OWOA). In: ICSCA 2019 Conference Proceedings: 8th International Conference on Software and Computer Applications, 19-21 February 2019 , Penang, Malaysia. pp. 135-139.. ISBN 978-1-4503-6573-4

Alara, John Adewole and Alara, Oluwaseun Ruth (2019) Ethno-medicinal potentials and phytochemical properties of aloe vera: A review. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 5 (5). pp. 57-73. ISSN 0126-8139. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. (2019) Anti-diabetic activity and mineral elements evaluation of vernonia amygdalina leaves obtained from Malaysia. Marmara Pharmaceutical Journal, 23 (3). pp. 514-521. ISSN 1309-0801. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. (2019) GC-MS and FTIR analyses of oils from Hibiscus sabdariffa, Stigma maydis and Chromolaena odorataleaf obtained from Malaysia: Potential sources of fatty acids. Chemical Data Collections, 20. pp. 1-7. ISSN 2405-8300. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. (2019) Microwave-assisted extraction of phenolics from Hibiscus sabdariffacalyces : kinetic modelling and process intensification. Industrial Crops and Products, 137. pp. 528-535. ISSN 0926-6690. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. (2019) Microwave-assisted extraction of phenolics from hibiscus sabdariffa calyces : kinetic modelling and process intensification. Industrial Crops and Products, 137. pp. 528-535. ISSN 0926-6690. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. and Alara, John Adewole (2019) Two-level factorial screening of microwave-assisted extraction parameters for the recovery of phenolic compounds from vernonia cinerea leaf. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 5 (5). pp. 16-28. ISSN 0126-8139. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. and Ishmael, Ukaegbu Chinonso and Kabbashi, Nassereldeen Ahmed (2019) Extraction and characterization of bioactive compounds in Vernonia amygdalina leaf ethanolic extract comparing Soxhlet and microwave-assisted extraction techniques. Journal of Taibah University for Science, 13 (1). pp. 414-422. ISSN 1658-3655. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. and Siti Kholijah, Abdul Mudalip (2019) Screening of microwave-assisted-batch extraction parameters for recovering total phenolic and flavonoid contents from chromolaena odorata leaves through two-level factorial design. Indonesian Journal of Chemistry, 19 (2). pp. 511-521. ISSN 1411-9420 (Print); 2460-1578 (Online). (Published)

Alara, Oluwaseun Ruth and Siti Kholijah, Abdul Mudalip and Nour, A. H. and Mahmoud, Mohammed Saeed and Obanijesu, Emmanuel Ogo-Oluwa (2019) Data on parametric influence of microwave-assisted extraction on the recovery yield, total phenolic content and antioxidant activity of Phaleria macrocarpa fruit peel extract. Chemical Data Collections, 24. pp. 1-2. ISSN 2405-8300. (In Press / Online First) (In Press / Online First)

Alashwal, B Y and Gupta, Arun and Husain, M S B (2019) Characterization of dehydrated keratin protein extracted from chicken feather. IOP Conference Series: Materials Science and Engineering, 702 (012033). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Alashwal, Basma Yahya and Saad Bala, M. and Gupta, Arun and Sharma, Swati and Mishra, Puranjan (2019) Improved properties of keratin-based bioplastic film blended with microcrystalline cellulose : a comparative analysis. Journal of King Saud University - Science. pp. 1-5. ISSN 1018-3647. (In Press / Online First) (In Press / Online First)

Alazaiza, M. Y. D. and Ngien, S. K. and Copty, N. and Bob, M. M. and Samira A., Kamaruddin (2019) Assessing the influence of infiltration on the migration of light non-aqueous phase liquid in double-porosity soil media using a light transmission visualization method. Hydrogeology Journal, 27 (2). pp. 581-593. ISSN 1431-2174 (print); 1435-0157 (online). (Published)

Alazaiza, Motasem Y. D. and Copty, Nadim K. and Ngien, S. K. and Bob, Mustafa M. and Aburas, Maher M. (2019) Characterization of capillary pressure–saturation relationships for double-porosity medium using light transmission visualization technique. Transport in Porous Media, 130 (2). pp. 513-528. ISSN 0169-3913. (Published)

Albashir, Walid Ali (2019) A study on determinants of adopting Islamic banking products in Libya: the role of customer involvement and perceived usefulness as mediator. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zainuddin, Yuserrie).

Albtoush, Faten Ahmad and Doh, Shu Ing (2019) A review on causes of cost overrun in the construction projects. International Journal of New Innovations in Engineering & Technology, 12 (3). pp. 15-22. ISSN 2319-6319. (Published)

Alenezi, R. A. and Norkhizan, A. M. and Rani, H. A. and Maulana, M. I. and Yasar, M. (2019) An experimental investigation of a diesel engine using carbon nanotubes blended with biodiesel. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET), 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012048). ISSN 1757-8981 (Print), 1757-899X (Online)

Aletba, Salam Ridha Oleiwi and Norhidayah, Abdul Hassan and Eeydzah, Aminudin and Putra Jaya, Ramadhansyah and Nurul Athma, Mohd Shukry and Nordiana, Mashros and A. Aziz, Md Maniruzzaman and Md. Nor, Hasanan (2019) Thermal performance of waste materials as aggregate replacement in asphalt pavement. In: IOP Conference Series: Earth and Environmental Science, The 12th International Civil Engineering Post Graduate Conference (SEPKA), The 3rd International Symposium on Expertise of Engineering Design (ISEED), 27-28 August 2018 , Johor, Malaysia. pp. 1-10., 220 (012011). ISSN 1755-1315

Alghail, Adnan Ali Mohammed (2019) A novel project management maturity model by integrating knowledge management capabilities : empirical evidence from institutions of higher education in Yemen. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Liu, Yao).

Alginahi, Hiba and Alginahi, Yasser M. and Kabir, M. Nomani (2019) Data Protection Laws. In: Authentication Technologies for Cloud Computing, IoT and Big Data. The Institution of Engineering and Technology (IET), London, United Kingdom, pp. 309-337. ISBN 978-1-78561-557-3

Alginahi, Yasser M. and Kabir, M. Nomani (2019) Conclusion. In: Authentication Technologies for Cloud Computing, IoT and Big Data. The Institution of Engineering and Technology (IET), pp. 339-341. ISBN 9781785615573

Alhaimi, Nabil Mohammed Ali (2019) Online Yemeni agriculture product shopping system (OYAPSS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Alhroob, Essam and Mohammed, Mohammed Falah and Lim, Chee Peng and Tao, Hai (2019) A Critical Review on Selected Fuzzy Min-Max Neural Networks and Their Significance and Challenges in Pattern Classification. IEEE Access, 7. pp. 56129-56146. ISSN 2169-3536. (Published)

Ali, Ahmed Mahmood (2019) Design of optimal nanoscale channel dimensions of FinFET based on constituent semiconductor materials. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Shaif Abdullah, Waheb Abdul Jabbar).

Ali, Gomaa A. M. and Habeeb, Omar Abed and Algarni, H. and K. F., Chong (2019) CaO impregnated highly porous honeycomb activated carbon from agriculture waste: symmetrical supercapacitor study. Journal of Materials Science and Chemical Engineering, 54 (1). pp. 683-692. ISSN 2327-6045 (print); 2327-6053 (online). (Published)

Ali, Gomaa A. M. and Sadegh, Hamidreza and M. M., Yusoff and K. F., Chong (2019) Highly stable symmetric supercapacitor from cysteamine functionalized multi-walled carbon nanotubes operating in a wide potential window. Materials Today: Proceedings, 16 (Part 4). pp. 2273-2279. ISSN 2214-7853. (Published)

Ali, Gomaa A. M. and Thalji, Mohammad R. and Wee, Chen Soh and Algarni, H. and K. F., Chong (2019) One-step electrochemical synthesis of MoS2/graphene composite for supercapacitor application. Journal of Solid State Electrochemistry. pp. 1-10. ISSN 1432-8488 (print); 1433-076 (online). (Published)

Ali, Mohammed A. H. and Mailah, Musa (2019) A simulation and experimental study on wheeled mobile robot path control in road roundabout environment. International Journal of Advanced Robotic Systems, 16 (2). pp. 1-17. ISSN 1729-8806. (Published)

Ali, Mohammed Hasan (2019) A fast learning network with improved particle swarm optimization for intrusion detection system. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Fadli, Zolkipli).

Ali, Mohammed Hasan and Mohamed Fadli, Zolkipli (2019) Model of Improved a Kernel Fast Learning Network Based on Intrusion Detection System. In: Intelligent Computing & Optimization. International Conference on Intelligent Computing & Optimization: ICO 2018, 4-5 October 2018 , Pattaya, Thailand. pp. 146-157., 866. ISBN 978-3-030-00979-3

Ali, Mohammed Rashid (2019) Experimental measurement and prediction of thermophysical properties of methyl tert-butyl ether (MTBE) with methanol, diisopropyl ether (DIPE) and N-methylaniline binary mixtures. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ali, Muna Jalal and Makky, Essam A. and Zareen, Seema and M. M., Yusoff (2019) Identification of bioactive phytochemicals using GC-Mass and TLC to the estimation of antimicrobial susceptibility of plant extracts. In: Journal of Physics: Conference Series, 2nd International Science Conference, 24-25 April 2019 , University of Al-Qadisiyah Diwaniyah, Iraq. pp. 1-11., 1294 (062013). ISSN 1742-6588 (print); 1742-6596 (online)

Ali, Shahid and Mohd Shaiful Zaidi, Mat Desa and Azizan, Ramli (2019) A road map to generative safety culture: An integrated conceptual model. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (012051). ISSN 1757-899X

Ali, Z. and Ismail, R. and Abu Bakar, A. H. and Muhammad, N. N. and Ahmad Azmey, F. L. (2019) Perceived Usefulness of KALAM. International Journal of Novel Research in Education and Learning, 6 (4). pp. 8-15. ISSN 2394-9686. (Published)

Ali Muttaleb, Hasan and Noorhuzaimi@Karimah, Mohd Noor and Rassem, Taha H. and Shahrul Azman, Mohamed Noah and Ahmed Muttaleb, Hasan (2019) A proposed method for the semantic Similarity use WordNet to handle the ambiguity in Social Media text. In: 10th Icatse International Conference on Information Science and Applications 2019, 16 - 18 Disember 2019 , Seoul, Korea. pp. 471-483., 621. ISBN Online 978-981-15-1465-4

Alia Aqilah, Ghazali and Raj Krishna Roshan, Kanasan and Sunarti, Abd Rahman and Mohamad Syafiq, Abdul Wahab and Nadia Sofea, Hazleen and Norhidayana, Mandayar (2019) 23 fractional factorial design for polymer based thin film composite (TFC) membrane synthesis for CO2/CH4 separation. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-16., 702 (012049). ISSN 1757-899X

Alia Aqilah, Ghazali and Sunarti, Abd Rahman and Rozaimi, Abu Samah (2019) Preparation and Characterisation of Pineapple Peel Waste as Nanoadsorbent Incorporated into Pebax 1657 Nanocomposite Membrane for CO2/CH4 Separation. In: 11th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2019), 19-20 November 2019 , Kuantan, Pahang. pp. 1-12.. (Unpublished)

Alim, Samiul (2019) Development of electrochemical biosensor based on SnO2-nanofiber with enhanced electron transfer of redox biomolecule. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aljabali, Ahlam and Abdul Rahman, Mohd Kasim and Ayman, Mohd Hussein (2019) A progress on the development of mathematical model on two-phase flow over a vertical stretching sheet. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019), 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-10., 1366 (012045). ISSN 1742-6596

Aljbour, Nawzat D. and Beg, M. D. H. and Jolius, Gimbun (2019) Acid Hydrolysis of Chitosan to Oligomers Using Hydrochloric Acid. Chemical Engineering and Technology. ISSN 1521-4125. (In Press / Online First) (In Press / Online First)

Aljbour, Nawzat D. and Beg, M. D. H. and Jolius, Gimbun and Alam, A. K. M. Moshiul (2019) An Overview of Chitosan Nanofibers and their Applications in the Drug Delivery Process. Current Drug Delivery, 16 (4). pp. 272-294. ISSN 1875-5704. (Published)

Aljbour, Nawzat Deeb (2019) Preparation and characterization of chitosan/poly lactic acid nanofibers using electrospinning process for drug delivery applications. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Alkhateeb, Abdullah Nihad (2019) The impacts of intellectual capital on competitive advantage mediated by organizational performance in selected Malaysia research universities. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Allen, Lee Wei Kiat (2019) The English language multilingual processing for sentiment analysis in social media by using Python NLTK Text Classification, Miopia and MeaningCloud sentiment analysis techniques. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Almekhlafi, Mohammed Ahmed (2019) The effect of palm oil clinker powder & cockle shell powder as cement replacement to concrete mechanical properties. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Almelian, Mohamad Milood and Izzeldin, I. Mohd and Abu Zaharin, Ahmad and Omran, Mohamed A. and Muhamad Zahim, Sujod and Elasager, N. M. and Salem, Mohamed (2019) Improvement of performance and response time of cascaded five-level VSC STATCOM using ANN controller and SVPWM during period of voltage sag. In: 5th International Conference on Electrical, Control and Computer Engineering (INECCE 2019), 29-30 July 2019 , Swiss Garden Kuantan. pp. 1-13.. (Unpublished)

Almelian, Mohamad Milood and Izzeldin, I. Mohd and Abu Zaharin, Ahmad and Salem, Mohamed and Omran, Mohamed Asghaiyer and Awang, Jusoh and Sutikno, Tole (2019) Enhancing the performance of cascaded three-level VSC STATCOM by ANN controller with SVPWM integegration. International Journal of Electrical and Computer Engineering (IJECE), 9 (5). pp. 3880-3890. ISSN 2088-8708. (Published)

Almohammedi, Akram A. and Nor K., Noordin and Sali, A. and Fazirulhisyam, Hashim and Jabbar, Waheb A. and Saeed, Sabri (2019) Modeling and analysis of IEEE 1609.4 MAC in the presence of error-prone channels. International Journal of Electrical and Computer Engineering (IJECE), 9 (5). pp. 3531-3541. ISSN 2088-8708. (Published)

Alomoush, Alaa A. and Alsewari, Abdulrahman A. and Alamri, Hammoudeh S. and Aloufi, Khalid and Kamal Z., Zamli (2019) Hybrid Harmony Search Algorithm with Grey Wolf Optimizer and Modified Opposition-based Learning. IEEE Access, 7. 68764- 68785. ISSN 2169-3536. (Published)

Alqadami, Abdulrahman Shueai Mohsen and Jamlos, M. F. and Mohd Aminudin, Jamlos (2019) Efficacy of a wideband flexible antenna on a multilayer polymeric nanocomposites Fe3O4-PDMS substrate for wearable applications. Current Applied Physics, 19 (11). pp. 1259-1265. ISSN 1567-1739. (Published)

Alsajri, Mohammad and Mohd Arfian, Ismail and Abdul-Baqi, Saba (2019) A Review on the Recent Application of Jaya Optimization Algorithm. In: IEEE 1st Annual International Conference on Information and Sciences (AiCIS 2018), 20-21 November 2018 , Fallujah, Iraq. pp. 129-132.. ISBN 978-1-5386-9188-5

Alsamawi, Mohamed Abdulwali Ali and Mohd Ridzuan, Darun and Panigrahi, Shrikant and Al-Refaei, Abd Al-Aziz Hamed (2019) Investigating the effect of Corporate Social Responsibility and affective commitment on Corporate Performance in Oil and Gas Corporations in Yemen. Journal of Advanced Research in Business and Management Studies, 17 (1). pp. 41-56. ISSN 2462-1935. (Published)

Alsamawi, Mohamed Abdulwali Ali and Mohd Ridzuan, Darun and Panigrahi, Shrikant and Al-Refaei, Abd Al-Aziz Hamed (2019) The effect of Corporate Social Responsibility on corporate performance in Oil and Gas Industry. Journal of Advanced Research in Social and Behavioural Sciences, 16 (1). pp. 1-14. ISSN 2462-1951. (Published)

Alsewari, Abdul Rahman Ahmed and Sinan, Q. Salih (2019) A new algorithm for normal and large-scale optimization problems: Nomadic People Optimizer. Neural Computing and Applications, 32. pp. 10359-10386. ISSN 0941-0643. (Published)

Alsewari, Abdulrahman A. and Kabir, M. Nomani and Kamal Z., Zamli and Alaofi, Khalid S. (2019) Software product line test list generation based on harmony search algorithm with constraints support. International Journal of Advanced Computer Science and Applications (IJACSA), 10 (1). pp. 605-610. ISSN 2158-107X ; 2156-5570(Online). (Published)

Alsewari, Abdulrahman A. and Kamal Z., Zamli and Lin, Mee Xuan (2019) Firefly combinatorial testing strategy. In: Intelligent Computing: Proceedings of the 2018 Computing Conference, Volume 1, 10-12 July 2018 , London, United Kingdom. pp. 936-944., 858. ISBN 978-3-030-01173-4

Alsewari, Abdulrahman A. and Ng, Yeong Khang and Kamal Z., Zamli and Mohammed E., Younis (2019) CTJ: Input-output based relation combinatorial testing strategy using Jaya algorithm. In: 2019 IEEE Congress on Evolutionary Computation, 10-14 Jun 2019 , Wellington, New Zealand. pp. 1-10.. (Unpublished)

Alvin Ngieng, Wen Hong (2019) Undrained shear strength of soft clay reinforced with encapsulated polypropylene (PP) column. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Alzubeer, Mohammed Ahmed Mohammed (2019) Biomethanation of sewage wastewater using ultrasonic membrane anaerobic system (UMAS). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amalia Witra, Jailani (2019) Smart garbage monitoring system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Amalina Hanani, Ismail (2019) Pozzolanic reactivity of chemically pre-treated palm oil clinker powder (POCP) with hydrochloric acid. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Amalina Hanani, Ismail and Kusbiantoro, Andri and Chin, Siew Choo and Khairunisa, Muthusamy and Mukhlis, Islam and Tee, K. F. (2019) Pozzolanic reactivity and strength activity index of mortar containing palm oil clinker pretreated with hydrochloric acid. Journal of Cleaner Production, 242 (118565). pp. 1-10. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Aman, Sidra and Hussanan, Abid and Zulkhibri, Ismail and Mohd Zuki, Salleh (2019) MHD effect on Nano-Maxwell fluid with cobalt nanoparticles passing over a Plate with porous medium. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019), 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-6., 1366 (012047). ISSN 1742-6596

Aman, Sidra and Hussanan, Abid and Zulkhibri, Ismail and Mohd Zuki, Salleh (2019) MHD effect on nano-maxwell fluid with cobalt nanoparticles passing over a plate with porous medium. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019), 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 1366 (012047). ISSN 1742-6588

Aman, Sidra and Mohd Zuki, Salleh and Zulkhibri, Ismail and Khan, Ilyas (2019) Flow analysis of second grade fluid with wall suction/injection and convective boundary condition. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). pp. 135-143. ISSN 2289-7879. (Published)

Amelia, Abd Rahman (2019) Model for the evaluation of usability of scientific workflows. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Amer Adel, Shahad (2019) The deciding factors for expatriate purchase of property in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amin, Khairatun Najwa Mohd and Beg, M. D.H. and Yusoh, K. and Sulaiman, Nurul Sa Aadah and Nafsun, Aainaa Izyan (2019) Cellulose nanocrystal reinforced thermoplastic polyurethane nanocomposites. , [Research Report: Research Report] (Unpublished)

Amin Ridzuan, Ishak (2019) 2 penyelidik cipta sistem lampu LED berkuasa tinggi. Berita Harian . p. 16.

Amin Ridzuan, Ishak (2019) Usah biar Kuantan kembali jadi Marikh. Berita Harian . (Unpublished)

Aminatul Nor, Mohamed Said (2019) 107 pupils received school supplies donated by UMP Alumni and NGOs. UMP News . (Unpublished)

Aminin Faqih, Mohd Amin (2019) Numerical investigation on steel – concrete composite slabs under blast loading. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amir Firdaus, Basirun (2019) Solar charging system for bluetooth solar grass trimmer. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Amir Haziq, Ibrahim (2019) ‘Gotong Royong’ by UMP students to clean up Batu Hitam beach. UMP News . (Unpublished)

Amir Haziq, Ibrahim (2019) Mahasiswa UMP lestari pantai cakna alam sekitar. UMP News . (Unpublished)

Amira Ainna, Alias (2019) Assessment of leaching behavior of laterite soil amended with magnesium rich synthetic gypsum (MRSG). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amirah, Ya’acob and N., Zainol and Putri Nurul Yasmin, Mohd Ridza and Siti Hatijah, Mortan (2019) Pineapple leaves juice characterization for microbial growth inhibition. Materials Science and Engineering, 1092 (012088). pp. 1-9. ISSN 1757-899X. (Published)

Amirah Nurhafizah, Abu Bakar and Mohammad Rusydi, Zahariman and Ahmad Syahiman, Mohd Shah (2019) Real-time wireless energy management system of miniature standalone photovoltaic application. Journal of Advanced Research in Dynamical and Control Systems, 11 (S9). pp. 52-61. ISSN 1943-023X. (Published)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and A. Z., Hishamudin (2019) Effect of nozzle distance and cutting parameters on MQL machining of AISI 1045. In: Journal of Physics: Conference Series, International Conference on Mechanical and Manufacturing Engineering (ICME2018), 16-17 July 2018 , Johor, Malaysia. pp. 1-8., 1150 (012045). ISSN 1742-6596

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Safian, Sharif and Hiroyuki, Sasahara (2019) Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique. Journal of Cleaner Production, 209. pp. 947-964. ISSN 0959-6526 (Print); 1879-1786 (Online). (In Press / Online First) (In Press / Online First)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Safian, Sharif and Sasahara, Hiroyuki (2019) The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045. Tribology International, 129. pp. 347-362. ISSN 0301-679X. (Published)

Amirruddin, Abdul Kadir (2019) Tribological performance analysis of nanocellulose-AL2O3-engine oil. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Amirul, Ahmad (2019) Strategi pembudayaan pembelajaran sepanjang hayat. UMP News . (Unpublished)

Amirul Naqiuddin Jamaludin, Jamaludin (2019) Performance of different digital elevation model resolution for the Rompin River Basin. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amizatulhani, Abdullah and Mohammad Amirul Syukri, Md Zain and Mohd Yuhyi, Mohd Tadza and Hazarika, Hemanta (2019) Potential of tyre derived geomaterial as alternative material in gabion type retaining wall. International Journal of Integrated Engineering, 11 (6). pp. 274-284. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Amri Muaz, Azmimurad (2019) The relationship between technical vocabulary breadth, english language proficiency, and vocabulary learning strategies among engineering undergraduates at Universiti Malaysia Pahang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Amri Muaz, Azmimurad and Najah, Osman (2019) The Employment Of Learning Strategies In Learning Engineering Terminology Among Engineering Undergraduates. In: Asia Proceedings of Social Sciences: Asia Multidisciplinary Conference (AIMC 2019), 1-2 May 2019 , Universiti Teknologi Malaysia. pp. 128-130., 4 (1).

Amri Muaz, Azmimurad and Najah, Osman (2019) Vocabulary Learning Strategies: Learning Engineering Terminology among Engineering Majors for Industry 4.0 Readiness. Universal Journal of Educational Research, 7 (12A). pp. 75-84. ISSN 2332-3213. (Published)

Amrouni, Khaled I. A. and Ruzaini, Abdullah Arshah and Kadi, Alaa J. (2019) A systematic review: Factors affecting employees’ adoption of E-government using an integration of UTAUT & TTF theories. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 457-464.. ISSN 2518-668X

Amy Syahiera, Abdul Malik (2019) Potential of oleochemicals waste to serve as partial sand replacement in concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Amy Zulaikha, Mohd Ali (2019) Reach Out Programme with Integrated Islamic School Kuantan ‘TOEFL® Young Students Series GO English! Project’. UMP News . (Unpublished)

Andalib, Tarnima Warda and Mohd Ridzuan, Darun (2019) Re-engineered and integrated industrial relations model for governance integrity : multiple case studies in Bangladesh. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1254-1270., 2019. ISSN 2518-668X

Andalib, Tarnima Warda and Mohd Ridzuan, Darun and Noor Azlinna, Azizan (2019) East Asian trends of human resource management: theories and practices. International Journal of Human Resources Development and Management, 19 (2). pp. 135-149. ISSN 1741-5160 (Online). (Published)

Anes, G. Mrwan and Ang, F. Chen and M. Akmal, Adzmi and M., Hafiz and K., Kamal and Mohd Fahmi, Othman and Abdul Adam, Abdullah (2019) Effect of AL2O3, SIO2 and CNT nanoparticles blend fuels on diesel engine performances and emission characteristics. In: 8th Global Conference On Global Warming, 22-25 April 2019 , Qatar University, Doha, Qatar. pp. 1-34.. (Unpublished)

Anhar, Muhammad P. and Sutikno, S. and M. S. M., Sani (2019) Analysis of bulletproof vest made from fiber carbon composite and hollow glass microsphere (HGM) in absorbing energy due to projectile impact. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET), 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012001). ISSN 1757-8981 (Print), 1757-899X (Online)

Anis Farhana, Mazlan (2019) Seismic design for reinforced concrete hospital building influenced by soil type and grade of concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Anis Farhanah, Mohd Fadzir and Siti Ilyani, Rani and Gimbun, Jolius (2019) Experimental measurement for non-spherical bulk materials flow behaviour in rectangular enclosure. In: IOP Conference Series: Materials Science and Engineering; Electronic Packaging Interconnect Technology Symposium 2019, EPITS 2019, 24 - 25 November 2019 , Penang. pp. 1-9., 701 (012061). ISSN 1757-8981

Anis Farihan, Mat Raffei and Sutikno, Tole and Asmuni, Hishammuddin and Hassan, Rohayanti and Razib, M. Othman and Shahreen, Kasim and A Riyadi, Munawar (2019) Fusion iris and periocular recognitions in non-cooperative environment. Indonesian Journal of Electrical Engineering and Informatics, 7 (3). pp. 543-554. ISSN 2089-3272. (Published)

Anis Nabila, Khidir (2019) YBR peruntukan RM2.25j untuk biasiswa. Utusan Malaysia . p. 48.

Anis Suriyani, Mat Yaacob and Nurul Aishah, Mazlan and Kamaliah, Abdul Samad and Syed Mohd Saufi, Tuan Chik and Hafizuddin, Wan Yussof (2019) Factors affecting enzymatic hydrolysis of oil palm frond bagasse using cellic HTec2 for xylooligosaccharides production. Factors affecting enzymatic hydrolysis of oil palm frond bagasse using cellic HTec2 for xylooligosaccharides production, 7 (1). pp. 122-129. ISSN 23078553. (Published)

Anisah, Dasman and Nur Syamilah, Arifin and Abdul Rahman, Mohd Kasim and Yacob, N A (2019) Formulation of dusty micropolar fluid mathematical model. In: Journal of Physics: Conference Series; 2nd International Conference on Applied and Industrial Mathematics and Statistics 2019, ICoAIMS 2019, 23-25 July 2019 , The Zenith Hotel Kuantan, Pahang, Malaysia. pp. 1-8., 1366 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Anita, Abdul Rani (2019) Creating Future Leaders Program 2.0. CMLHS News . (Unpublished)

Ansah, Richard Hannis and Sorooshian, Shahryar (2019) Green economy: Private sectors’ response to climate change. Environmental Quality Management, 28 (3). pp. 63-69. ISSN 1088-1913. (Published)

Anshana Suwanno, Tan (2019) Analysis of method stability of slope failure using slope/w and manual calculation for redesigning failed slope - a case study. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Anthony, Bokolo Jnr. (2019) Validating the usability attributes of AHP-software risk prioritization model using partial least square-structural equation modeling. Journal of Science and Technology Policy Management, 10 (2). pp. 404-430. ISSN 2053-4620. (Published)

Anthony, Bokolo Jnr. and Mazlina, Abdul Majid and Awanis, Romli (2019) Hybrid multi-agents and case based reasoning for aiding green practice in institutions of higher learning. Tehnicki Vjesnik, 26 (1). pp. 13-21. ISSN 1330-3651. (Published)

Anthony Jr, Bokolo and Adzhar, Kamaludin and Awanis, Romli and Anis Farihan, Mat Raffei and Eh Phon, Danakorn Nincarean and Aziman, Abdullah and Gan, Leong Ming and Nurbiha, A. Shukor and Mohd Shukri, Nordin and Suria, Baba (2019) Exploring the role of blended learning for teaching and learning effectiveness in institutions of higher learning: An empirical investigation. Education and Information Technologies, 24 (6). pp. 3433-3466. ISSN 1573-7608. (Published)

Anthony Jr, Bokolo and Maureen, Gbefa Peremoboere and Mazlina, Abdul Majid (2019) A web deployed multi-agent based approach for student-lecturer appointment scheduling in institutions of higher learning. In: Third International Conference On Computational Science And Information Management ICOCSIM-2019, 21 - 24 March 2019 , Lombok, Indonesia. pp. 1-8.. (Unpublished)

Anwar, Shahid (2019) An enhanced android botnet detection approach using feature refinement. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zolkipli, Mohamad Fadli).

Ara, Mosummath Hosna and Karim, Kaykobad Md Rezaul and Saha, Nirob Kumar and Nazmul Islam, A. B. M. and Kumar Dhar, Palash (2019) Hematological, histopathological and growth performance studies on albino rats fed on mystus gulio fillet with formulated cereal. Journal of Chemical Health Risks, 9 (1). pp. 1-10. ISSN 2251-6719. (Published)

Ariawan, Angga and Pebrianti, Dwi and Ronny and Akbar, Yudha Maulana and Margatama, Lestari and Bayuaji, Luhur (2019) Image processing-based flood detection. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018, 27-28 September 2018 , Universiti Malaysia Pahang. pp. 371-380., 538. ISBN 978-981-13-3708-6 (Online)

Ariff, M. H. and Ibrahim, Mohd Zamri and Khatun, Sabira (2019) Fundamental study on the circular polarization antenna for RFID UHF reader. , [Research Report: Research Report] (Unpublished)

Arslan, A. and Masjuki, H. H. and Quazi, M. M. and Kalam, Md. Abul and Varman, M. and Jamshaid, M. and Rahman, S. M. Ashrafur and Imran, M. and Zulfattah, Z. M. and Anwar, M. T. and Gohar, G. A. and Mandalan, S. M. and Harith, M. H. (2019) Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads. Materials Research Express, 6 (10). pp. 1-2. ISSN 2053-1591. (Published)

Artika Rasul, Sulaiman (2019) Persepsi guru Pendidikan Islam dalam pentaksiran dokumen standard kurikulum dan pentaksiran sekolah rendah. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 366-373.. ISBN 978-967-17268-1-5

Artika Rasul, Sulaiman and Hasmadi, Hassan (2019) Persepsi guru Pendidikan Islam dalam pentaksiran dokumen standard kurikulum dan pentaksiran sekolah rendah. International Journal of Humanities Technology and Civilization (IJHTC), 2 (7). pp. 13-19. ISSN 2289-7216. (Published)

Artika Rasul, Sulaiman and Hasmadi, Hassan (2019) Tahap kesediaan guru Pendidikan Islam dalam pentaksiran dokumen standard kurikulum dan pentaksiran sekolah rendah. International Journal of Humanities Technology and Civilization (IJHTC), 1 (6). pp. 1-7. ISSN 2289-7216. (Published)

Arwa, Mukhtar and Awanis, Romli and Abdulgabber, Mansoor Abdullateef and Hael, Al-bashiri (2019) Environmental Risks in Supply Chain: Recommendations and Directions for Future Research. In: IOP Conference Series: Materials Science and Engineering, Joint Conference on Green Engineering Technology & Applied Computing 2019, 4-5 February 2019 , Bangkok, Thailand. pp. 1-9., 551 (012034).

Asar, Abdul Karim (2019) Women are lack in religion and mind: The misunderstanding interpretation. International Journal of Humanities Technology and Civilization (IJHTC), 2 (7). pp. 87-93. ISSN 2289-7216. (Published)

Asar, Abdul Karim and Aziman, Abdullah (2019) Online learning study in divorce cases management: A case study at “Pejabat Agama Islam Kuantan”. In: Proceeding of International Conference on E-Learning (ICOEL 2019), 21-22 August 2019 , Universiti Malaysia Sarawak (UNIMAS), Sarawak, Malaysia. pp. 93-101.. ISBN 978-967-2145-70-7 (E)

Ashraf, Teara and Doh, Shu Ing and Chin, Siew Choo and Y. J., Ding and X. X., Jiang (2019) Investigation on the durability of use fly ash and eggshells powder to replace the cement in concrete productions. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-7., 244 (012025). ISSN 1755-1315

Ashraf Osman, Ibrahim and Siti Mariyam, Shamsuddin and Abdulrazak, Yahya Saleh and Ahmed, Ali and Mohd Arfian, Ismail and Shahreen, Kasim (2019) Backpropagation neural network based on local search strategy and enhanced multi-objective evolutionary algorithm for breast cancer diagnosis. International Journal on Advanced Science, Engineering and Information Technology, 9 (2). pp. 609-615. ISSN 2088-5334. (Published)

Ashwinder, Chelliah (2019) Production and characterization of degradable polyethelene terephthalete using pro-degradant additives, polylactic acid and polylactic acid grafted maleic anhydride. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ashwindran, S. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Computational fluid dynamic (CFD) of vertical-axis wind turbine: Mesh and time-step sensitivity study. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5604 -5624. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Unsteady computational study of novel biologically inspired offshore vertical axis wind turbine at different tip speed ratios: a two-dimensional study. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6753-6772. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ashwini, Baskaran and Siti Kholijah Abdul, Mudalib and Izhab, Izirwan (2019) Optimization of aqueous extraction of blue dye from butterfly pea flower. In: Journal of Physics: Conference Series, 12th Seminar on Science and Technology, 2-3 October 2018 , Kota Kinabalu, Sabah, Malaysia. pp. 1-9., 1358 (012001). ISSN 1742-6596

Asiah, Kassim and Hafizoah, Kassim and Nursyafawati, Sabuan (2019) An online platform for reading comprehension achievements data: A cefr-aligned system. In: International Language and Education Conference (iLEC 2019), 9-10 October 2019 , Sepang, Malaysia. pp. 1-14.. (Unpublished)

Asif, Jawad and Irene, Wei Kiong Ting and Qian, Long Kweh (2019) Intellectual capital and corporate performance: The role of controlling shareholders among Taiwanese semiconductor firms. In: 1st International Conference on Financial Markets (ICFM2019), 11-12 July 2019 , Kuala Lumpur. pp. 1-13.. (In Press / Online First)

Asim, Zeehan and Sorooshian, Shahryar (2019) Exploring the role of knowledge, innovation and technology management (KNIT) capabilities that influence research and development. Journal of Open Innovation: Technology, Market, and Complexity, 5 (21). pp. 1-47. ISSN 2199-8531. (Published)

Asim, Zeeshan (2019) Developing framework for capabilities related to supporting management discipline that contributes to r&d in public organizations of Pakistan. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sorooshian, Shahryar).

Asim, Zeeshan and Tan, Seng Teck and Sorooshian, Shahryar (2019) An Expert-Approved R&D Model. International Journal of Engineering and Advanced Technology, 8 (6). pp. 1939-1946. ISSN 2249-8958. (Published)

Asmara, Y. P. and Sutjipto, A. G. E. and Siregar, J. P. and Kurniawan, Tedi and Jamiluddin, Jaafar (2019) Analyses corrosion prediction software for CO2 corrosion of carbon steel using statistical formulas. International Journal of Mechanical Engineering and Robotics Research, 8 (3). pp. 374-379. ISSN 2278-0149. (Published)

Asmawati, Sajari (2019) The quality of chief integrity officer and ethical climate on the level of ethics and integrity and its relationship with organizational commitment : the case of federal government sector. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Asmawati, Sajari and Hasnah, Haron and Ishak, Ismail (2019) Effectiveness of quality of chief integrity officer, ethical climate on the level of ethics and integrity in the Malaysian federal. Journal of Governance & Integrity, 3 (1). pp. 73-99. ISSN 2600-7479. (Published)

Asmawati, Sajari and Hasnah, Haron and Ishak, Ismail and Chambers, Andrew (2019) Quality of chief integrity officer, ethical climate and the level of ethics and integrity in the Malaysian public sector. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 423-458., 2019. ISSN 2518-668X

Asri Syahmi, Asnor (2019) Contributing factors for successful implementation of erosion and sediment control plan in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Asrol, Awang (2019) 35 graduan perintis terima diploma. Berita Harian . p. 46.

At-Tasneem, Mohd Amin and A. N., Oumer and W. H., Azmi and K., Sulihaakma (2019) Mechanical process and size characterisation of rice husk, mango bark and mango leaves as a drag reduction additive. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress, 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-15., 736 (022112). ISSN 1757-899X

Atalla, Yousif and Hashim, Yasir and Abdul Nasir, Abd Ghafar and Jabbar, Waheb A. (2019) A temperature characterization of (Si-FinFET) based on channel oxide thickness. TELKOMNIKA (Telecommunication Computing Electronics and Control), 17 (5). pp. 2475-2480. ISSN 1693-6930. (Published)

Athirah, B. and Nurul Shahida, M. S. (2019) Occupational noise exposure among airport workers in Malaysia: an ergonomic investigation. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Atiqah, Mohd Nor (2019) Serious game in learning English (Grammar race). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Atirah Shahira, Mahadi (2019) UPPAAL model for validation of the software development process. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Atta, Ebtehal and Yuserrie, Zainuddin (2019) Malaysian culture can be a source of sustained competitive advantage for Malaysian organizations. International Journal Of All Research Writings, 1 (2). pp. 40-45. ISSN 2582-1008. (Published)

Atta, Mohammed Thamir (2019) The effect of usability and information quality on Malaysian user’s satisfaction of student information systems in higher education institutions. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Auni Syahirah, Abu Bakar and Goh, Khai Shan and Gan, Lai Ta and Rohana, Abdul Karim (2019) IOT – eye drowsiness detection system by using intel edison with gps navigation. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018, 27-28 September 2018 , Universiti Malaysia Pahang. pp. 485-493., 538. ISBN 978-981-13-3708-6 (Online)

Aw, Mei Yee and Mohd Saberi, Mohamad and Chong, Chuii Khim and Safaai, Deris and Muhammad Akmal, Remli and Mohd Arfian, Ismail and Corchado, Juan Manuel and Omatu, Sigeru (2019) Parameter estimation of essential amino acids in Arabidopsis thaliana using hybrid of bees algorithm and harmony search. In: Practical Applications of Computational Biology and Bioinformatics, 12th International Conference. Advances in Intelligent Systems and Computing . Springer Verlag, Berlin, Germany, pp. 9-16. ISBN 978-3-319-98702-6

Awani Rangers, UMP (2019) Polisi Hijau Universiti Malaysia Pahang galak semangat cintakan alam sekitar. Astro Awani Online . (Unpublished)

Awani Rangers, UMP (2019) UMP Cipta Kecemerlangan bersama Industri. Astro Awani Online . (Unpublished)

Awanis, Romli and Mazlina, Abdul Majid and Aziman, Abdullah and Fatinatul Nazurah, Zainuddin and Mohamad Mohsin, Ismail (2019) Mobile Parenting Socio-Literacy Learning Apps (M-PASL). In: Proceedings Of The International University Carnival On E-Learning (IUCEL) 2019, 21-22 August 2019 , DeTAR Putra, Universiti Malaysia Sarawak,Kota Samarahan, Sarawak, Malaysia. pp. 88-90.. ISBN 978-967-2298-08-3

Ayesha, Noor and Yuserrie, Zainuddin (2019) A Comprehensive analysis of the relationship between off-the-job embeddedness and continuance commitment on Intention to stay: Based on PLS-SEM. Journal of Governance & Integrity, 2 (2). pp. 22-35. ISSN 2600-7479. (Published)

Ayodele, Bamidele V. and Mohamed Yazrul, Mohd Yassin and Rosmawati, Naim and Sureena, Abdullah (2019) Hydrogen production by thermo-catalytic conversion of methane over lanthanum strontium cobalt ferrite (LSCF) and αAl2O3 supported Ni catalysts. Journal of the Energy Institute, 92 (4). pp. 892-903. ISSN 1743-9671. (Published)

Ayodele, Bamidele V. and Siti Indati, Mustapa and Alsaffar, May Ali and Cheng, C. K. (2019) Artificial intelligence modelling approach for the prediction of CO-rich hydrogen production rate from methane dry reforming. Catalysts, 9 (9). pp. 1-20. ISSN 2073-4344. (Published)

Ayodele, Bamidele V. and Siti Indati, Mustapa and Mohamed Yazrul, Mohd Yassin and Sureena, Abdullah (2019) Experimental and optimization studies of hydrogen production by steam methane reforming over lanthanum strontium cobalt ferrite supported Ni catalyst. International Journal of Energy Research, 43 (14). pp. 8118-8135. ISSN 0363-907X (print); 1099-114X (online). (Published)

Ayodele, Freida Ozavize and Hasnah, Haron and Ishak, Ismail (2019) Ethical leadership, ethical leadership climate and employee moral effectiveness : a social learning perspective. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 189-205., 2019. ISSN 2518-668X

Azamuddin, Abdul Rahman and Wan Isni Sofiah, Wan Din and M. N. M., Kahar (2019) Distance based thresholds for 2-tier relay nodes selection in WSN. Computer Standards & Interfaces, 66. pp. 1-16. ISSN 0920-5489. (Published)

Azhari, Azmir and Ismail, Izwan and Gebremariam, Mebrahitom Asmelash and Rahman, M. M. and Rosli, Nurrina (2019) Machinability study of structural automotive alloys using abrasive waterjet machining process. , [Research Report: Research Report] (Unpublished)

Azhari, Hamid Nour and Sundarajan, Siva (2019) Characterization of bioactive compounds extracted from patchouli : Comparing microwave-assisted hydrodistillation and hydrodistillation methods. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-11., 702 (012042). ISSN 1757-8981

Azian, Ibrahim and Noorfadhleen, Mahmud and Nadrawina, Isnin and Dina Hazelbella, Dillah and Dayang Nurfauziah, Fauz Dillah (2019) Cyber warfare impact to national security - Malaysia experiences. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 206-224., 2019. ISSN 2518-668X

Aziman, Abdullah and Asar, Abdul Karim (2019) Academic integrity in higher education: Analysis of research publication and web citation. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1046-1056., 2019. ISSN 2518-668X

Aziman, Abdullah and Asar, Abdul Karim and Nur Alnisa’ Anis Alanna, Ruzelan (2019) Emotional Engagement Index: A Novel Tool to Measure Emotional Engagement in Blended Learning. In: Proceeding of International Conference on E-Learning (ICOEL 2019), 21-22 August 2019 , Universiti Malaysia Sarawak (UNIMAS), Sarawak, Malaysia. pp. 102-113.. ISBN 978-967-2145-70-7 (E)

Aziman, Abdullah and Wan Nor Afiqah, Wan Othman and Adzhar, Kamaludin and Asar, Abdul Karim (2019) Cloud-Based Smart Attendance For Engagement Analytics. In: Proceedings Of The International University Carnival On E-Learning (IUCEL) 2019, 21-22 August 2019 , DeTAR Putra, Universiti Malaysia Sarawak,Kota Samarahan, Sarawak, Malaysia. pp. 183-186.. ISBN 978-967-2298-08-3

Aziratul Adawiyah, Dulkarim (2019) Utilization of oleo chemical waste as a partial cement replacement in cement brick. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Aziz, Shujahadeen B. and Abdulwahid, Rebar T. and Hamsan, Muhamad H. and Brza, Mohamad A. and Abdullah, Ranjdar M. and Kadir, Mohd F. Z. and Saifful Kamaluddin, Muzakir (2019) Structural, impedance, and EDLC characteristics of Proton conducting chitosan-based polymer blend electrolytes with high electrochemical stability. Molecules, 24 (19). pp. 1-15. ISSN 1420-3049 (print); 1420-3049 (online). (Published)

Azizuddin, Abd Aziz and S. N., Ashwindran (2019) Design of small thermal vacuum chamber for 125-U CubeSat satellite. In: 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 Oktober 2018 , UMP Pekan. pp. 1-7., 469 (012108).

Azizul Qayyum, Basri and N. M. Zuki, N. M. and K. A. S. H. M., Yasir and H. M., Fazi and Ahmad Fauzi, Fudzin (2019) The validation of productivity on the changeover activity at the automotive stamping press line by comparing the embedded SMED frame-work versus SMED approach: A witness simulation case study. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012005). ISSN 1757-899X

Azlan, Abd Rahman and Rashidi, Abbas (2019) Penilaian terhadap masalah-masalah program pengimarahan masjid di negeri Pahang. 2nd International Conference on Business, Humanities and Education (ICBHE 2019) (2). pp. 265-275. (Published)

Azlina, Nordin (2019) Seismic design for reinforced concrete office building influenced by concrete grade and level of seismicity. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azmi, A. A. and Ngadi, Norzita and Kamaruddin, M. J. and Zakaria, Z. Y. and Teh, Lee Peng and Annuar, N. H. R. and Herma Dina, Setiabudi and Jalil, A. A. and Aziz, M. A. A. (2019) Rapid one pot synthesis of mesoporous ceria nanoparticles by sol-gel method for enhanced CO2 capture. Chemical Engineering Transactions, 72. pp. 403-408. ISSN 2283-9216. (Published)

Azrag, M. A. K. and Tuty Asmawaty, Abdul Kadir (2019) Empirical Study of Segment Particle Swarm Optimization and Particle Swarm Optimization Algorithms. International Journal of Advanced Computer Science and Applications (IJACSA), 10 (8). pp. 480-485. ISSN 2156-5570(Online). (Published)

Azrag, M. A. K. and Tuty Asmawaty, Abdul Kadir and Kabir, M. Nomani and Jaber, Aqeel S. (2019) Large-scale kinetic parameters estimation of metabolic model of escherichia coli. International Journal of Machine Learning and Computing, 9 (2). pp. 160-167. ISSN 2010-3700. (Published)

Azri Nurfathiah, Mustafa (2019) Investigation on the causes and method in minimizing the building defects. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azrina, Abd Aziz and Muzamir, Hasan and Che Ku Mohamad Faizal, Che Ku Yahya (2019) Development and modification of TI02 based-nanophotocatalyst for direct conversion of C02 to hydrocarbon fuel. , [Research Book Profile: Research Report] (Unpublished)

Azwani, Alias and Mohamad Rizza, Othman (2019) Temperature control of vacuum dividing wall column – case study on oleochemical fatty acid fractionation. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Azwin, Ahmad (2019) The roles of xanthan gum, potato starch, and sorbitol in the formulation of gluten free bread. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Azwin Arif, Abdul Rahim and Norazah, Mohd Noor and Mohamed Amin, Embi and Nor Yazi, Khamis and Supyan, Hussin and Rosseni, Din (2019) Fuzzy delphi method refinement of mobile language learning framework elements for technical and engineering contexts. In: 10th IEEE International Conference on Engineering Education, ICEED 2018, 8 - 9 November 2018 , Pullman Hotel & Resorts, Kuala Lumpur, Malaysia.. pp. 173-176.. ISBN 978-153866846-7

A’dilah Hanum, Azman (2019) Pahang mosques and surau portal. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

B

B S, Elarbe and N., Ridzuan and K., Yusoh and Ibrahim, Elganidi and N, Abdullah (2019) Screening of the factors for novel pour point depressant copolymer synthesis to improve the copolymer yield. IOP Conference Series: Materials Science and Engineering, 702 (012028). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

B., Setiawan and T., Saidi and A., Yuliannur and U., Polom and Putra Jaya, Ramadhansyah and Mohamad Idris, Ali (2019) Ambient noise analysis for characterizing sub-surface dynamic parameters. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 68-77..

Baarimah, Abdullah Omar Obaid (2019) Structural behaviour of fibers as part of shear reinforcement in reinforced concrete slab. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Bach, Long Giang and Nguyen, Duy Chinh and Nguyen, Phu Thuong Nhan and Tran, T. H. and Islam, Md. Rafiqul and Lim, Kwon Taek and Vo, Dai-Viet N. and Nguyen, Trinh Duy (2019) A simple synthesis route for preparation and optical properties of PMMA-g-ZnO nanocomposites through surface-initiated radical polymerization. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference on New Material and Chemical Industry, 17-19 November 2018 , Sanya, China. pp. 1-8., 479 (012108). ISSN 1757-8981 (Print), 1757-899X (Online)

Badaruddin, Muhammad and Mohd Saberi, Mohamad and Zuwairie, Ibrahim and Kamil Zakwan, Mohd Azmi and Mohd Ibrahim, Shapiai and Mohd Falfazli, Mat Jusof (2019) Oppositional learning prediction operator with jumping rate for simulated kalman filter. In: International Conference on Computer and Information Sciences, ICCIS 2019, 3 - 4 April 2019 , Jouf University, Aljouf, Kingdom of Saudi Arabia. pp. 1-7.. ISBN 978-153868125-1

Bagaber, Salem Salah Abdullah (2019) Energy and cost integration model for multi-objective optimisation in turning process of stainless steel 316. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Bakr, Zinab H. and Wali, Qamar and Yang, Shengyuan and Yousefsadeh, M. and Padmasree, K. P. and Jamil, Ismail and Mohd Hasbi, Ab. Rahim and M. M., Yusoff and Rajan, Jose (2019) Characteristics of ZnO − SnO2 composite nanofibers as a photoanode in dye-sensitized solar cells. Industrial and Engineering Chemistry Research, 58 (2). pp. 643-653. ISSN 0888-5885 (Print); 1520-5045 (Online). (Published)

Bakr, Zinab Hassanien Hassanien (2019) Synthesis and characterization of tin based hybrid nanofibers and nanoflowers as photoelectrode in dye-sensitized solar cells. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Balkhaya, . and Anhar, M. P. and Suwarno, . and M. S. M., Sani (2019) Investigation of knife quality by using forging and flame hardening methods. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET), 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-6., 506 (012004). ISSN 1757-8981 (Print), 1757-899X (Online)

Balya, Darohini and M. F., Abas and Pebrianti, Dwi and Hamzah, Ahmad and M. H., Ariff and M. R., Arshad (2019) Optimization of quaternion based on hybrid PID and Pw control. In: The 5th International Conference on Electrical, Control and Computer Engineering (INECCE2019), 29-30 July 2019 , Swiss Garden Beach Resort Kuantan. pp. 1-6.. (Unpublished)

Bamgbaded, J. A. and Salimon, Maruf Gbadebo and Adeleke, A. Q. and Nasidi, Y. (2019) Contractor’s technology acceptance for firm sustainability performance. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1084-1101., 2019. ISSN 2518-668X

Bari, Bifta Sama and Sabira, Khatun and Kamarul Hawari, Ghazali and Fa-kir, Md. Moslemuddin and Wan Nur Azhani, W. Samsudin and Mohd Falfazli, Mat Jusof and Rashid, Mamunur and Islam, Minarul and M. Z., Ibrahim (2019) Ultra wide Band (UWB) Based Early Breast Cancer Detection using Artificial Intelligence. In: 5th International Conference On Electrical, Control And Computer Engineering (INECCE2019), 29-30 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-11.. (Unpublished)

Bari, Bifta Sama and Sabira, Khatun and Kamarul Hawari, Ghazali and Fakir, Md. Moslemuddin and Mohd Hisyam, Mohd Ariff and Mohd Faizal, Jamlos and Rashid, Mamunur and Islam, Minarul and M. Z., Ibrahim and Mohd Falfazli, Mat Jusof (2019) Bandwidth and Gain Enhancement of a Modified Ultra-wideband (UWB) Micro-strip Patch Antenna using a Reflecting Layer. In: 5th International Conference On Electrical, Control And Computer Engineering (INECCE2019), 29-30 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-10..

Basheer, Esmail A. M. and Mahmood, Wafaa K. and Abdulbari, Hayder A. (2019) Human hair-titanium dioxide integrated in photocatalytic microfluidics reactor for visible-light water treatment. In: Energy Security And Chemical Engineering Congress (ESCHE) 2019, 17-19 Julai 2019 , Parkroyal Resort, Penang, Malaysia. pp. 1-12.. (Unpublished)

Basheer, Esmail Abdullah Mohammed and Mahmood, Wafaa K. and Abdulbari, Hayder A. (2019) In situ ultrasound enhancement of octanoic acid directional solvent extraction for seawater desalination. Chemical Engineering Communications, 206 (7). pp. 940-952. ISSN 0098-6445 (print); 1563-5201 (online). (Published)

Baskara, S. N. and Haryati, Yaacob and Mohd Rosli, Hainin and S. A., Hassan and Nordiana, Mashros and N. Z. M., Yunus and N. A., Hassan and Muhammad Naqiuddin, Mohd Warid and M. K., Idham and C. R., Ismail and H. M., Nor and A., Mohamad and M. A. A., Aziz and Afiqah, R. N. and M. S. A., Ahmad and Putra Jaya, Ramadhansyah (2019) Influence of pavement condition towards accident number on Malaysian highway. In: IOP Conference Series: Earth and Environmental Science, The 12th International Civil Engineering Post Graduate Conference (SEPKA), The 3rd International Symposium on Expertise of Engineering Design (ISEED), 27-28 August 2018 , Johor, Malaysia. pp. 1-8., 220 (012008). ISSN 1755-1315

Basma Y., Alashwal and Arun, Gupta and Mohamed Saad, Bala Husain (2019) Characterization of dehydrated keratin protein extracted from chicken feather using NaOH. In: The 1st Process Systems Engineering & Safety (ProSES) Symposium (ProSES 2019), 4th September 2019 , Kuantan. pp. 1-8., 702 (012033). ISSN 1757-8981(Print); 1757-899X (Online)

Basri, Abdul (2019) Assessement of the projection of the future changes in climate by RCP 2.6, RCP4.5, RCP8.5. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Bathmanathan, Rupbansraaj and Yasmin Amira, Che Yahya and M. M., Yusoff and Jaya Vejayan, Palliah (2019) Utilizing Coagulant Plants in the Development of Functional Dairy Foods and Beverages: A Mini Review. Journal of Biological Sciences, 19 (3). pp. 259-271. ISSN 1727-3048. (Published)

Bathrinath, S. and Charan, Vadakapur Sai and Ponnambalam, S. G. and Saravanasankar, S. (2019) Identification and evaluation of criteria of agile manufacturing using dematel: a case from an indian metal fabrication industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 61-74. ISSN 2636-9575. (Published)

Bathrinath, S. and Rahul, K. and Pradeep, J. and Ponnambalam, S. G. and Saravanasankar, S. (2019) Evaluation of influence of principles involved in industry 4.0 over coal industries using TISM. In: Industry 4.0 and Hyper-Customized Smart Manufacturing Supply Chains. IGI Global, Hershey, PA, pp. 244-245. ISBN 9781522590781

Bawono, A. s. and Mohamad Idris, Ali and Noram Irwan, Ramli (2019) A preliminary study of seismic risk assessment shortly after the Banjarnegara Indonesia earthquake on 2018. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-9., 244 (012003). ISSN 1755-1315

Beg, M. D. H. and Islam, M. R. and Ahmed, Badlishah and R. M., Yunus and Abdullah, Abu Hannifa (2019) Optimization of reaction parameters of esterification on the synthesis of palm oil-based alkyds using response surface methods. In: IOP Conference Series: Materials Science and Engineering, 6th Global Conference on Polymer and Composite Materials (PCM 2019), 8-11 July 2019 , Bangkok, Thailand. pp. 1-8., 634 (012038). ISSN 1757-8981 (Print), 1757-899X (Online)

Beg, M. D. H. and Islam, Mir Sujaul and B., Ahmed and R. M., Yunus (2019) Optimization by RSM for the preparation of bioresin from palm oil. In: The 6th Global Conference On Polymer And Composite Materials (PCM 2019), 8-11 July2019 , Bangkok, Thailand. pp. 1-13.. (Unpublished)

Benjunior, B. and Asnul Hadi, Ahmad and M. M., Rashidi (2019) Direct thermal method pouring temperature and holding time effect on aluminium alloy 6061 microstructure. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-4.. (Unpublished)

Benraghda, Abdelmadjid (2019) Self-assessment throughvideo-recorded speech rehearsals in delivering technical oral presentation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Benseghir, Hocine and Abdullah, Ibrahim and Siddique, Md. Nurul Islam and Kabir, M. Nomani and Alginahi, Yasser M. (2019) Modelling emergency evacuation from an industrial building under spreading fire using a social force model with fire dynamics. In: 11th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2019), 19-20 November 2019 , Kuantan, Pahang. pp. 1-7.. (Unpublished)

Bhalaji, R. K. A. and Bathrinath, S. and Ponnambalam, S. G. and Saravanasankar, S. (2019) Analysis of risk factors for surgical site infection: A case research in an Orthopedic Hospital (Healthcare Industry). Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 98-113. ISSN 2636-9575. (Published)

Bhalaji, R. K. A. and Bathrinath, S. and Ponnambalam, S. G. and Saravanasankar, S. (2019) A Fuzzy Decision-Making Trial and Evaluation Laboratory approach to analyse risk factors related to environmental health and safety aspects in the healthcare industry. Sadhana, 44 (55). pp. 1-15. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Bhuiyan, Md Zakirul Alam and Zaman, M. and Wang, Guojun and Wang, Tian and Rahman, Md. Arafatur and Tao, Hai (2019) Protected bidding against compromised information injection in IoT-based smart grid. In: 2nd EAI International Conference on Smart Grid and Internet of Things, SGIoT 2018, 11 July 2018 , Niagara Falls, Canada. pp. 78-84., 256. ISSN 1867-8211 ISBN 978-303005927-9

Bhuyar, P. and M. M., Yusoff and Mohd Hasbi, Ab. Rahim and Sundararaju, Sathyavathi and Gaanty Pragas, Maniam and Govindan, Natanamurugaraj (2019) Effect of Plant Hormones on the Production of Biomass and Lipid Extraction for Biodiesel Production from Microalgae Chlorella Sp. Journal of Microbiology Biotechnology and Food Sciences, 9 (4). pp. 671-674. ISSN 1338-5178. (Published)

Bhuyar, P. and Mohd Hasbi, Ab. Rahim and M. M., Yusoff and Gaanty Pragas, Maniam and Govindan, Natanamurugaraj (2019) A selective microalgae strain for biodiesel production in relation to higher lipid profile. Maejo International Journal of Energy and Environmental Communication, 1 (1). pp. 8-14. ISSN 2673-0537. (Published)

BinJubeir, Mohammed and Ali Ahmed, Abdul Ghani and Mohd Arfian, Ismail and Sadiq, Ali Safaa and Muhammad Khurram, Khan (2019) Comprehensive survey on Big Data Privacy Protection. IEEE Access, 8. pp. 2067-2079. ISSN 2169-3536. (Published)

Brapakaran, Paranitharan and Abdullah, N. A. Z. and M. Fouzi, S. M. and Sani, M. S.M. (2019) Correlation of numerical and experimental analysis for dynamic behaviour of a 3 blade propeller structure. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019, 7 March 2019 , Selangor. pp. 1-10., 1262 (012019). ISSN 1742-6588

C

C. H., Ng and C. F., Lai and S. N. M., Yahaya and S., Shamsudin and S. N., Aqida and F., Sharrifuddin (2019) Effect of initial blank temperature in hot press forming towards 22MnB5 springback failure. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 5137-5149. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

C. K., Lung and M. R., Mohd Hasan and M. O., Hamzah and A., Sani and S., Poovaneshvaran and Putra Jaya, Ramadhansyah (2019) Effect of temperatures and loading rates on direct shear strength of asphaltic concrete using layer-parallel direct shear test. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 335-344..

Chahal, Sugandha and Kumar, A and Jahir Hussain, Fathima Shahitha (2019) Development of biomimetic electrospun polymeric biomaterials for bone tissue engineering. A review. Journal of Biomaterials Science, Polymer Edition, 30 (14). pp. 1308-1355. ISSN 0920-5063. (Published)

Chak, Wen Zheng and Abu, Mohd Yazid (2019) Application of Activity Based Costing for Palm Oil Plantation. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 1-14. ISSN 2636-9575. (Published)

Chan, Hwee Geem (2019) Investigation on the occurrence of tles associated positive cloud to ground (+CG) lightning in UMP Pekan. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Amir Izzani, Mohamed).

Chan, W. S. and Rozaimi, Abu Samah and Norazwina, Zainol and Abdul Sahli, Fakharudin and Suraini, Abd-Aziz and Phang, Lai Yee (2019) Modeling of vanillin adsorption from aqueous solution using resin H103 by artificial neural network. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-13., 702 (012048). ISSN 1757-8981

Chandraseagar, S. and Abdul Halim, Abdul Razik and S. N., Abdulrahman and M. A., Abdaziz (2019) Aspen Plus simulation and optimization of industrial spent caustic wastewater treatment by wet oxidation method. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (012011). ISSN 1757-899X

Charles, Ashwin and Cheng, C. K. (2019) Photocatalytic treatment of palm oil mill effluent by visible light-active calcium ferrite: effects of catalyst preparation technique. Journal of Environmental Management, 234. pp. 404-411. ISSN 0301-4797. (Published)

Charles, Ashwin and Khan, Maksudur R. and Ng, Kim Hoong and Wu, Ta Yeong and Lim, Jun Wei and Wongsakulphasatch, Suwimol and Witoon, Thongthai and Cheng, C. K. (2019) Facile synthesis of CaFe2O4 for visible light driven treatment of polluting palm oil mill effluent: Photokinetic and scavenging study. Science of The Total Environment, 661. pp. 522-530. ISSN 0048-9697. (Published)

Che Mohammad Nizam, Che Kamaruddin (2019) Effects of environmental ergonomic factors towards muscles activities for lifting task. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Che Nur Mazadillina, Che Zahari and Nina Suhaity, Azmi and Muhammad Zaki, Ramli (2019) Glycosaminoglycans from plant sources and the potential uses as anticoagulant and anticancer agents. Journal of Biochemistry, Microbiology and Biotechnology (JOBIMB), 7 (1). pp. 52-55. ISSN 2289-5779. (Published)

Che Nur Mazadillina, Zahari and Marina, Mohd Sham and Sakina, Shahabudin and Mohd Hairul, Ab. Rahim and Nina Suhaity, Azmi (2019) A rapid quantitative dye-binding method of screening glycosaminoglycans presence in medicinal plants. Asian Journal of Pharmaceutical and Clinical Research, 12 (1). pp. 396-402. ISSN 0974-2441(print); 2455-3891(online). (Published)

Che Wan, Mohd Noor and R., Mamat and Najafi, G. and Anuar, Abu Bakar and Samo, Khalid (2019) Determination of bio-diesel engine combustion pressure using neural network based model. Journal of Engineering Science and Technology, 14 (2). pp. 909-921. ISSN 1823-4690. (Published)

Che Wan Mohd Noor, Che Wan Othman (2019) Experimental and prediction model of low compression marine diesel engine fuelled with palm biodiesel blends. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Chee, Xian Yang (2019) Cloud based public bus location tracking and notification application for mobile devices. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chen, James Lau Tze and Azizuddin, Abd Aziz and A. N., Oumer and Mohd Hazwan, Yusof (2019) Energy efficiency analysis in office building through thermal modelling. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-11., 469 (1). ISSN 1757-8981

Cheng, Jack Kie and Hassan, Ahmed Khalif and Norhana, Mohd Aripin and Rafiuddin, Mohd Yunus (2019) An analytic hierarchy process approach in decision-making for material selection in an automotive company: a case study. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 472-484., 2019. ISSN 2518-668X

Cheng, Y. W. and Chong, Chi Cheng and Cheng, C. K. (2019) Catalytic synthesis of ethylene from ethanol dehydration over palm oil clinker derived mesoporous SBA-15 : effects of physicochemical properties on ethylene formation. In: The 8th Asia Pacific Congress on Catalysis, 4-7 August 2019 , Bangkok, Thailand. pp. 1-45.. (Unpublished)

Cheng, Yoke Wang (2019) Hydrogen-rich syngas production from steam reforming of palm oil mill effluent (POME) over LaNiO3 & LaCoO3 catalysts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Cheng, Yoke Wang and Khan, Maksudur R. and Ng, Kim Hoong and Wongsakulphasatch, Suwimol and Cheng, C. K. (2019) Harnessing renewable hydrogen-rich syngas from valorization of palm oil mill effluent (POME) using steam reforming technique. Renewable Energy, 138. pp. 1114-1126. ISSN 0960-1481. (Published)

Chew, Few Ne and Chua, Gek Kee and Chin, Sim Yee and Nor Hanimah, Hamidi and Samah, Rozaimi Abu (2019) Integrated recovery process for recombinant protein over-expressed as inclusion bodies in bacterial cells using preparative electrophoresis. , [Research Report: Research Report] (Unpublished)

Chew, Wi Kang and Muhammad Aizzat, Zakaria (2019) Rover car outdoor localisation for navigation tracking using differential global positioning system estimation. In: Intelligent Manufacturing and Mechatronics: Proceedings of the 2nd Symposium on Intelligent Manufacturing and Mechatronics – SympoSIMM 2019, 8 July 2019 , Melaka, Malaysia. pp. 535-556.. ISBN 978-981-13-9539-0

Chi, Cheng Chong and Lee, Peng Teh and Setiabudi, H. D. (2019) Syngas production via CO2 reforming of CH4 over Ni-based SBA-15: Promotional effect of promoters (Ce, Mg, and Zr). Materials Today Energy, 12. pp. 408-417. ISSN 2468-6069. (Published)

Chi Hung, Chong and Mohd Azri Hizami, Rasid (2019) Improvement of heat transfer for DC motor windings. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Chia, Shin Chian (2019) Degradation modelling on the influence of moisture content upon burst capacity of composite repaired pipeline. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chia, Vi Vien and Pang, Sook Fun and Sureena, Abdullah and M. M., Yusoff and Jolius, Gimbun (2019) POCER 1915: Microwave-Assisted Extraction of Andrographolide, 14-Deoxy-11,12-didehydroandrographolide and Neoandrographolide from Andrographis Paniculata. In: Proceedings of the 5th Postgraduate Colloquium for Environmental Research (POCER 2019), 8-9 August 2019 , Putrajaya, Malaysia. pp. 39-41., 8. ISBN 978-967-11279-6-4

Chia, Yun Qi and Mohd Nizar, Mhd Razali and Ahmad Shahir, Jamaludin and Ahmad Redza, Ahmad Mokhtar and Saiful Bahari, Hamzah and Mohd Shahril, Osman (2019) Surface texturing potential on carbide insert in reducing aluminium alloy adhesiveness during machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 42-50. ISSN 2636-9575. (Published)

Chin, Fook Loy (2019) Bio-flotation harvesting of chlorella vulgaris microalgae using jatropha curcas L. protein-oil emulsion. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Chin, S. Y. (2019) High yield of isosorbide production from sorbitol dehydration catalysed by amberlyst 36. In: Energy Security and Chemical Engineering Congress (ESCHE2019), 17-19 July 2019 , Parkroyal Resort Penang, Malaysia. pp. 1-2.. (Unpublished)

Chin, S. Y. and Nurwadiah, Azizan and Mohd Amirul Asyraf, Ahmad and Muhammad Ridzuan, Kamaruzaman (2019) Ion exchange resins catalysed esterification for the production of value added petrochemicals and oleochemicals. In: Applications of Ion Exchange Materials in Chemical and Food Industries. Springer Nature Switzerland, Berlin, Germany, pp. 75-98. ISBN 978-3-030-06085-5

Chin, Siew Choo and Doh, Shu Ing (2019) Bamboo fibers composite - a novel material for structural strengthening. In: The 9th International Conference on Key Engineering Materials (ICKEM 2019), 29 March-1 April 2019 , Oxford, United Kingdom. pp. 1-7.. (Unpublished)

Chin, Siew Choo and Moh, Jacky Neing Sheng and Doh, Shu Ing and Fadzil, Mat Yahaya and Jolius, Gimbun (2019) Strengthening of Reinforced Concrete Beams Using Bamboo Fiber/Epoxy Composite Plates in Flexure. Key Engineering Materials, 821. pp. 465-471. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Chin, Siew Choo and Tee, Kong Fah and Tong, Foo Sheng and Ong, Huei Ruey and Jolius, Gimbun (2019) Thermal and mechanical properties of bamboo fiber reinforced composites. Materials Today Communications, 23 (100876). pp. 1-14. ISSN 2352-4928. (Published)

Chin, Yan Yee (2019) Monitoring air pollutant index (API) using Aeroqual AQM 65 @ UMP, Kuala Pahang, Pekan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ching, Sheng Ooi and Ngui, Wai Keng and Kar, Hoou Hui and Lim, Meng Hee and Leong, Mohd Salman (2019) Review of underground storage tank condition monitoring techniques. In: Engineering Application of Artificial Intelligence Conference 2018 (EAAIC 2018), 3-5 December 2018 , Sabah, Malaysia. pp. 1-13., 255 (02009). ISSN 2261-236X

Chong, Beng Wei (2019) Finite element analysis on the effect of hollow section on the strength of foamed concrete beam. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chong, C. C. and Bukhari, S. N. and Cheng, Y. W. and Setiabudi, H. D. and Jalil, A. A. and Phalakornkule, C. (2019) Robust Ni/Dendritic Fibrous SBA-15 (Ni/DFSBA-15) For Methane Dry Reforming: Effect of Ni Loadings. Applied Catalysis A: General, 584 (117174). pp. 1-13. ISSN 0926-860X. (Published)

Chong, Chern How and Ahmad Shahrizan, Abdul Ghani (2019) Dual image fusion technique for underwater image contrast enhancement. In: The 11th National Technical Seminar on Unmanned System Technology (NUSYS’19), 2-3 December 2019 , Universiti Malaysia Pahang (UMP), Gambang Campus, Kuantan, Malaysia. pp. 1-6.. (Unpublished)

Chong, Li Ping (2019) Development of electrocoagulation cell by using different types of electrode materials to treat restaurant wastewater. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Chong, Tat Ming (2019) Delineation of the Rompin River Basin and network using various GIS applications. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Chong, Yee Chin and Sorooshian, Shahryar (2019) Possible Barriers Affecting Implementation of ISO28000 for the Supply Chain. International Journal of Supply Chain Management (IJSCM), 8 (1). pp. 90-97. ISSN 2050-7399 (Online). (Published)

Chowdhury, M. A. and Debnath, U. K. and Kamruzzaman, M. and Nuruzzaman, D. M. and Mia, Md. Shahin (2019) Analysis and optimization of turned surfaces of AISI 1060 using ANOVA and regression. Tribology in Industry, 41 (1). pp. 23-32. ISSN 0354-8996. (Published)

Christina, Andin and Abdul Said, Ambotang and Yusri, Kamin and Rohana, Hamzah (2019) Transformasi persekitaran sekolah melalui permuafakatan sekolah dan komuniti luar bandar. Geografia-Malaysian Journal of Society and Space, 15 (2). pp. 84-101. ISSN 2682-7727. (Published)

Christopher Ngadi, Anak Julius and Lailatul Niza, Muhammad and Hamdan, Daniyal and Norazila, Jaalam and Nor Rul Hasma, Abdullah and Suliana, Ab Ghani (2019) A comparative study of hysteresis current controller and PI controller in grid-connected inverter. International Journal of Advanced Trends in Computer Science and Engineering, 8 (6). pp. 3182-3187. ISSN 2278-3091. (Published)

Chua, Gek Kee and Y. Tan, F. H. and Chew, Few Ne and Mohd Hairul, Ab. Rahim (2019) Nutrients content of food wastes from different sources and its pre-treatment. In: 6th International Conference on Environment: Empowering Environment and Sustainable Engineering Nexus Through Green Technology, ICENV 2018, 11 - 13 Disember 2018 , Penang, Malaysia. pp. 1-10., 2124 (1). ISBN 978-0-7354-1864-6

Chua, Xiao Ying (2019) Improving green IT assessment tool using case-based reasoning technique. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chuan, Zun Liang and Muhamad Husnain, Mohd Noh and Mohd Akramin, Mohd Romlay and Mu, Wen Chuan (2019) The productiveness of Bootstrap simulator in evaluating the accuracy parameters of measurement system for ball screw. In: Journal of Physics: Conference Series, 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICoAIMS 2019), 23-25 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-11., 1366 (012129). ISSN 1742-6596

Chuan, Zun Liang and Wan Nur Syahidah, Wan Yusoff and Mohd Khairul Bazli, Mohd Aziz and Ken, Tan Lit (2019) A comparison study between Doane’s and Freedman-Diaconis’ binning rule in characterizing potential water resources availability. In: Journal of Physics: Conference Series; 2nd International Conference on Applied and Industrial Mathematics and Statistics 2019, ICoAIMS 2019, 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-11., 1366 (1). ISSN 1742-6588 (print); 1742-6596 (online)

D

D., Ramasamy and K., Kadirgama and W. H., Azmi and M. M., Rahman and Mahendran, Samykano and W. S., W. Harun (2019) Prediction modelling for Cellulose Nanocrystal (CNC) dispersed in ethylene glycol- water mixture. In: 27th Annual International Conference on Composites or Nano Engineering, 13-21 Julai 2019 , University of Granada, Spain. pp. 1-2.. (Unpublished)

Dahawi, Yahya Ayesh and Abdul Halim, Abdul Razik and Mazrul Nizam, Abu Seman and Mohd Aizudin, Abd Aziz and Mohd Yusri, Mohd Yunus (2019) Aspen Plus Simulation of Bio-Char Production from a Biomass-Based Slow Pyrolysis Process. Key Engineering Materials, 797. pp. 336-341. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Danial, Mohamed and Mohd Yuhyi, Mohd Tadza and Rahisham, Abd Rahman and Mohd Ashraf, Mohamed Ismail (2019) Characterization of Andrassy bentonite as grounding enhancement material. In: The 11th National Technical Seminar on Unmanned System Technology (NUSYS’19), 2-3 December 2019 , Universiti Malaysia Pahang (UMP), Gambang Campus, Kuantan, Malaysia. p. 1.. (Unpublished)

Danial, Mohamed and Mohd Yuhyi, Mohd Tadza and Rahisham, Abd Rahman and Mohd Ashraf, Mohamed Ismail (2019) On the effect of bio-corrosion of copper electrode in Andrassy bentonite as grounding material. In: The 11th National Technical Seminar on Unmanned System Technology (NUSYS’19), 2-3 December 2019 , Universiti Malaysia Pahang (UMP), Gambang Campus, Kuantan, Malaysia. pp. 1-2.. (Unpublished)

Danial Adib, Kamaruddin (2019) Abandoned project through the medium of unfavourable economic condition in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Dao, Tan Phat and Nguyen, Duy Chinh and Nguyen, Duy Trinh and Tran, Thien Hien and Nguyen, Phu Thuong Nhan and Le, Nhan Thi Hong and Le, Xuan Tien and Nguyen, Dai Hai and Vo, Dai-Viet N. and Bach, Long Giang (2019) Extraction process of essential oil from plectranthus amboinicus using microwave-assisted hydrodistillation and evaluation of it’s antibacterial activity. Asian Journal of Chemistry, 31 (5). pp. 977-981. ISSN 0970-7077. (Published)

Dao, Tan Phat and Nguyen, Duy Chinh and Tran, Thien Hien and Thinh, Phan Van and Hieu, Vu-Quang and Vo, Dai-Viet N. and Nguyen, Trinh Duy and Bach, Long Giang (2019) Modeling and optimization of the orange leaves oil extraction process by microwave-assisted hydro-distillation : the response surface method based on the central composite approach (RSM-CCD model). Rasayan Journal of Chemistry, 12 (2). pp. 666-676. ISSN 0974-1496 (Print), 0976-0083 (Online). (Published)

Darshana, Kumari Raguphaty and Shamsuddin, Baharin and Faiz, Mohd Turan (2019) Technology sharing through university industry collaboration: Innovation in Malaysian manufacturing landscape. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 24-30. ISSN 2636-9575. (Published)

Das, Debashish (2019) An ensemble of neural network and modified grey wolf optimizer for stock prediction. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sadiq, Ali Safaa).

Daud, Mohd Razali and Shalfarina, Shahriman and Mohd Faudzi, Ahmad Afif and Sulaiman, Mohd Herwan and Irawan, Addie and Musa, Zulkifli (2019) Vision-based autonomous robot body alignment for copper wire spool pick up. , [Research Report: Research Report] (Unpublished)

Daud, Nor Khonisah and Martynov, Sergey and Mahgerefteh, Haroun and Nasuha, Norhaslinda (2019) Compression power requirements for Oxy-fuel CO2 streams in CCS. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (1). ISSN 1757-8981

Dayang Hjh Tiawa, Awang Hj Hamid and Abdul Hafidz, Omar and Adam, Jait and Norashikin, Yusof and Zulkifli, Ahmad@Manap (2019) Prediction of fatigue level during exercise in virtual reality environment for hajj pilgrimage. In: Seminar Serantau Pendidikan Tinggi Islam (SEIPTI 2019), 6-7 November 2019 , UNISSA, Brunei. pp. 669-681.. (Unpublished)

Dayangku Noorfazidah, Awang Sh'ri and Muhammad Abdul Hisyam, Abu Hassan and Zahiruddeen Salam, Zahari and W. S., Wan Harun (2019) Finite element simulation of equal channel angular pressing: effect of die angle and number of passes. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6402-6414. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Dhani, Ariatmanto and Ernawan, Ferda (2019) An adaptive scaling factor for multiple watermarking scheme. In: 4th International Conference on Information Technology, Information Systems and Electrical Engineering (ICITISEE-2019), 19 - 22 Nov. 2019 , Harper Mangkubumi Hotel, Yogyakarta, Indonesia. pp. 1-4.. ISBN 978-1-7281-5118-2

Din, Fakhrud (2019) A fuzzy adaptive teaching learning-based optimization strategy for generating mixed strength t-way test suites. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kamal Zuhairi, ZamlI).

Dina Diyana, Rastam Tan (2019) Pest Killa produk inovatif terbaik raih 2 anugerah khas. UMP News . (Unpublished)

Dipta, Das and Asif Khan, Shakir and Sah Golam, Rabbani and Mostafijur, Rahman and Syamimi Mardiah, Shaharum and Sabira, Khatun and Norasyikin, Fadilah and Khandker, M. Qaiduzzaman and Md. Shariful, Islam and Md. Shohel, Arman (2019) A comparative analysis of four classification algorithms for university students performance detection. In: 5th International Conference on Electrical, Control and Computer Engineering (INECCE 2019), 29-30 July 2019 , Swiss Garden Kuantan. pp. 1-12.. (Unpublished)

Diyana, Kamarudin and Faiz, Azizul and Wan Khairul Anuar, Wan Abd Manan (2019) An Empirical View of Business Ethics on Press Freedom: A Case Study. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 844-857.. ISSN 2518-668X

Diyana, Kamarudin and Haziman, Zakaria and Wan Khairul Anuar, Wan Abd Manan (2019) An Empirical View of Business Ethics on Private College in Kuantan: A Case Study. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 374-384.. ISSN 2518-668X

Diyana, Kamarudin and Mohammad Affendy, Omardin (2019) Sustainability Ethics of Safety in the Building Maintenance Industry: Technical Manager’s Perspectives. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1036-1045.. ISSN 2518-668X

Diyana, Kamarudin and Mohammad Fitri, Idrus and Siti Aisyah, Ismail and Shariman, Mustafa (2019) An Empirical View on Ethical Values and Moralism of Public Bus Service in Kuantan. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 364-373.. ISSN 2518-668X

Diyana, Kamarudin and Suhaidah, Hussain and Tengku Auwalul Hawa, Yahya and Nor Suraini, Mohd Hassan (2019) Online business sustainability and challenges to meet the demands of online consumers. In: The European Proceedings of Social & Behavioural Sciences EpSBS: ICBSI 2018 - International Conference on Business Sustainability and Innovation, 17-19 October 2018 , Bayan Baru, Penang, Malaysia. pp. 575-582., LXV. ISSN 2357-1330

Diyana, Kamarudin and Yasmin, Hussain (2019) Implementation of Malaysian hand signal codes into applications for the hearing impaired. Asian Journal of Instruction (E-AJI), 7 (1). pp. 54-63. ISSN 2148-2659. (Published)

Doh, Shu Ing and Alhokabi, Abdulmajeed Ali (2019) Study on the mechanical properties of bottom ash as a partial sand replacement in a non-load bearing fly ash bricks. Study on The Mechanical Properties of Bottom Ash as a Partial Sand Replacement in a Non-Load Bearing Fly Ash Bricks. pp. 59-66. ISSN 2523-2231. (Published)

Doh, Shu Ing and Lim, Kar Sing and Jolius, Gimbun and Chin, Siew Choo and Lim, S.P. and Tong, Foo Sheng (2019) Application of bamboo fibre composite in structural strengthening. Malaysian Construction Research Journal, 6 (1). pp. 185-192. ISSN 1985-3807. (Published)

Dominic, Tiong Sie Huo (2019) Effect of reinforcement to the square hollow section on the strength of foamed concrete beam. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Drajad, Wiryawan and Joni, Suhartono and Surjandy, . and Fernando, Yudi and Idris, Gautama So and Gui, Anderes (2019) Malware mobile devices in Indonesia. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 259-267.. ISSN 2518-668X

Dzulaika Nubaillah, Noor (2019) Techno-economic analysis in optimisation of hybrid air-conditioning system combining chilled water storage and solar water heater. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

E

E., Amri and Nurul Sa'aadah, Sulaiman and Qaid Alaw, Fares Ahmed (2019) Risk analysis of offshore pipeline due to third party damages. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (012053). ISSN 1757-8981

E. F., Junis and J. J., Jui and Mohd Helmi, Suid and Mohd Ashraf, Ahmad (2019) Identification of continuous-time hammerstein system using sine cosine algorithm. In: International Conference on Smart Instrumentation, Measurement and Application 2019, 27-29 August 2019 , Kuala Lumpur, Malaysia. pp. 1-6.. ISSN 2640-6535 ISBN 978-1-7281-3952-4

Eh Phon, Danakorn Nincarean and Ahmad Firdaus, Zainal Abidin and Mohd Faizal, Ab Razak and Shahreen, Kasim and Basori, Ahmad Hoirul and Sutikno, Tole (2019) Augmented reality: Effect on conceptual change of scientific. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1537-1544. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Eh Phon, Danakorn Nincarean and Anis Farihan, Mat Raffei and Adzhar, Kamaludin and Noraniza, Samat and Nur Shamsiah, Abdul Rahman (2019) The Earth & Universe Augmented Reality Educational Book. In: Proceedings Of The International University Carnival On E-Learning (IUCEL) 2019, 21-22 August 2019 , DeTAR Putra, Universiti Malaysia Sarawak,Kota Samarahan, Sarawak, Malaysia. pp. 228-229.. ISBN 978-967-2298-08-3

Eh Phon, Danakorn Nincarean and Mohd Hishamuddin, Abd Rahman and Suhaizal, Hashim and Nurul Farhana, Jumaat and Wan Isni Sofiah, Wan Din and Salwana, Mohamad (2019) Exploring the student’s interaction with augmented reality and their relationship to learning achievement. International Journal of Advanced Science and Technology (IJAST), 28 (2). pp. 301-307. ISSN 2005-4238. (Published)

Eh Phon, Danakorn Nincarean and Rahman, M. H. A. and Utama, N. I. and Ali, M. B. and Halim, N. D. A. and Kasim, S. (2019) The effect of augmented reality on spatial visualization ability of elementary school student. International Journal on Advanced Science, Engineering and Information Technology, 9 (2). pp. 624-629. ISSN 2088-5334. (Published)

Ekarizan, Shaffie and Ahmad Kamil, Arshad and Juraidah, A. and Anizahyati, Alisibramulisi and Putra Jaya, Ramadhansyah (2019) Moisture Susceptibility Of Superpave Asphalt Mixture With Rubber Polymer Modified Asphalt Binder. In: Proceedings of the Ninth International Conference - GEOMATE2019, 20-22 November 2019 , Fuchu city, Tokyo, Japan. pp. 676-681.. ISBN 978-4-909106025 C3051

Ekarizan, Shaffie and Ahmad Kamil, Arshad and Putra Jaya, Ramadhansyah and Wardati, hashim and Mohd Amin, Shafii (2019) Permanent Deformation of Hot Mix Asphalt (HMA) using Dynamic Modulus Simple Performance Test. International Journal of Recent Technology and Engineering, 8 (4). pp. 7001-7006. ISSN 2277-3878. (Published)

Ekarizan, Shaffie and Juraidah, A. and Ahmad Kamil, Arshad and Putra Jaya, Ramadhansyah and Nuryantizpura, Mohamad Rais and Mohd Amin, Shafii (2019) Relationship Between Rheological Properties of Nano Polymer Modified Asphalt Binder and Permanent Deformation of Asphalt Mixture. International Journal of Integrated Engineering, 11 (6). pp. 244-253. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Eldow, Abdalla and Shakir, Mohanaad and Talab, Mohammed Ahmed and Muttar, Ahmed Kh. and Tawafak, Ragad M. (2019) Literature Review Of Authentication Layer For Public Cloud Computing: A Meta-Analysis. Journal of Theoretical and Applied Information Technology, 97 (12). pp. 3448-3465. ISSN 1992-8645 (print); 817-3195 (online). (Published)

Elfira, Anuar (2019) Thin film composite hollow fiber membrane for separation in biorefinery. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Elfira, Anuar and Syed Mohd Saufi, Tuan Chik and Hafizuddin, Wan Yussof (2019) Effects of air gap on membrane substrate properties and membrane performance for biomass processing. Korean Journal of Chemical Engineering, 36 (7). pp. 1124-1130. ISSN 0256-1115 (Print); 1975-7220 (Online). (Published)

Elganidi, I. and Elarbe, B.S. and Norhayati, Abdullah and N., Ridzuan (2019) Characterization of a novel terpolymer containing maleic anhydride-co-stearyl methacrylate-cobenhely acrylate for wax inhibition application. IOP Conference Series: Materials Science and Engineering, 702 (1). pp. 12-27. ISSN 17578981. (Published)

Elhag, Husam Eldin Elhag Abugabr and Nailaa, Aishath and Azilah, Ajit and W. F. W., Ishak and A. Z., Sulaiman and Badhrulhisham, Abdul Aziz and Prasad, D. M. Reddy (2019) Optimization of protein yields in water extracts of Jackiopsis ornata roots by response surface methodology using microwave assisted extraction (MAE). In: AIP Conference Proceedings: Materials Characterization Using X-Rays and Related Techniques, 18-19 August 2018 , Kota Bharu, Kelantan, Malaysia. pp. 1-10., 2068 (020055). ISBN 978-0-7354-1796-0

Elhag, Husam Eldin Elhag Abugabr and Nailaa, Aishath and Nour, A. H. and Azilah, Ajit and Ahmad Ziad, Sulaiman and Badhrulhisham, Abdul Aziz (2019) Optimization of protein yields by ultrasound assisted extraction from Eurycoma longifolia roots and effect of agitation speed. Journal of King Saud University - Science, 31 (4). pp. 913-930. ISSN 1018-3647. (Published)

Elias, Bashar Qas and Alsajri, Mohammad and Ping, Jack Soh and Al-hadi, Azremi Abdullah (2019) Design of Flexible Planar Antennas Using Substrate Gap Structure for Surface Wave Reduction. In: IEEE 22nd International Conference on Control Systems and Computer Science (CSCS 2019), 28-30 May 2019 , Bucharest, Romania. pp. 453-458.. ISSN 2379-0482

Elizabeth, Marta and Yuhani, Yusof and Mohd Sham, Mohamad and Muhamad Faiz, Abu Bakar and Mohd Adhha, Ibrahim (2019) Efficacy of cupping in the treatment of hypertension disease using graph colouring. In: Journal of Physics: Conference Series, 2nd International Conference on Applied and Industrial Mathematics and Statistics (ICoAIMS 2019), 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-9., 1366 (012044). ISSN 1742-6588 (print); 1742-6596 (online)

Emma Melati, Burhanuddin (2019) FKASA anjur Persidangan Kebangsaan Kejuruteraan Angin & Gempa Bumi kali ke-3. UMP News . (Unpublished)

Emma Melati, Burhanuddin (2019) FKASA holds 3rd National Conference on Wind & Earthquake Engineering. UMP News . (Unpublished)

Emmery, Dayang Dirk (2019) Removal heavy metals from industrial wastewater using activated carbon from coconut coir. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Emyra Ezzaty, Masiren and Noorlisa, Harun and Haslenda, Hashim (2019) Molecular interaction establishment of amine-absorption process for CO2 removal. In: 1st Euro-Asia Conference on Co2 Capture and Utilisation (EACCO2CU 2019), 5-8 August 2019 , Sunway University, Selangor, Malaysia. pp. 1-28.. (Unpublished)

Engku Norfatima, Engku Dahalan (2019) Enhance formulation of organic coating for barrier protection of mild steel upon corrosive environment. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Erdiwansyah and Leman, A. M. and Muhamad Norkhizan, Abdullah and Mulyadi, L. and Fitri, Khoerunnisa and Sardjono, R. E. and Maulana, M. I. and M. S. M., Sani (2019) Performance of a small diesel engine by experimental and numerical simulation analysis. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET), 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-12., 506 (012029). ISSN 1757-8981 (Print), 1757-899X (Online)

Erdiwansyah and R., Mamat and M. S. M., Sani and Sudhakar, K. and Asep, Kadarohman and R.E., Sardjono (2019) An overview of Higher alcohol and biodiesel as alternative fuels in engines. Energy Reports, 5. pp. 467-479. ISSN 2352-4847. (Published)

Erdiwansyah, . and Leman, A.M. and Khoerunnisa, F. and Sardjono, R. E. and Munawir, . and Maulana, M. I. and M. S. M., Sani (2019) Engine modelling of a single cylinder diesel engine fuelled by diesel-methanol blend. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET), 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-14., 506 (012014). ISSN 1757-8981 (Print), 1757-899X (Online)

Erdiwansyah, . and M. S. M., Sani and R., Mamat and J. M., Zikri and N. F. D., Razak and Munawir, . (2019) Experimental investigation of vibrations and noise characterization for spark ignition engine. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012014). ISSN 1742-6588 (print); 1742-6596 (online)

Erdiwansyah, . and Mahidin, . and R., Mamat and M. S. M., Sani and Fitri, Khoerunnisa and Asep, Kadarohman (2019) Target and demand for renewable energy across 10 ASEAN countries by 2040. The Electricity Journal, 32 (10). pp. 1-10. ISSN 1040-6190. (Published)

Erdiwansyah, . and R., Mamat and M. S. M., Sani and Sudhakar, K. (2019) Renewable energy in Southeast Asia: Policies and recommendations. Science of The Total Environment, 670. pp. 1095-1102. ISSN 0048-9697. (Published)

Eric Jason, Stanley (2019) Mechanical properties of concrete cubes using tyre waste as partial sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ernawan, F. and Ariatmanto, Dhani (2019) Image watermarking based on integer wavelet transform-singular value decomposition with variance pixels. International Journal of Electrical and Computer Engineering (IJECE), 9 (3). pp. 2185-2195. ISSN 2088-8708. (Published)

Ernawan, Ferda (2019) Tchebichef image watermarking along the edge using YCoCg-R color space for copyright protection. International Journal of Electrical and Computer Engineering, 9 (3). pp. 1850-1860. ISSN 2088-8708. (Published)

Ernawan, Ferda and Kabir, M. N. and Mustaffa, Zuriani and Moorthy, Kohbalan and Ramalingam, Mritha (2019) An improved image compression technique using large adaptive DCT psychovisual thresholds. In: Proceedings of the 2nd IEEE International Conference on Knowledge Innovation and Invention 2019, ICKII 2019, 12 - 15 July 2019 , Seoul, Korea (South). pp. 561-564. (9042705). ISBN 978-172810110-1

Ernawan, Ferda and M. Nomani, Kabir (2019) An improved Watermarking Technique for Copyright Protection Based on Tchebichef Moments. IEEE Access, 7. pp. 151985-152003. ISSN 2169-3536. (Published)

Ernawan, Ferda and M. Nomani, Kabir and Zuriani, Mustaffa and Ramalingam, Mritha (2019) An adaptive large DCT psychovisual threshold in image compression. In: IEEE International Conference on Knowledge Innovation and Invention 2019 (IEEE ICKII 2019), 13 - 16 Julai 2019 , Seoul, South Korea. pp. 1-5.. (Unpublished)

Euniza, J. and Md. N., Hasanan and H., Zaitun and Norhidayah, Abdul Hassan and Haryati, Yaacob and Putra Jaya, Ramadhansyah and Noram Irwan, Ramli and Juraidah, A. and Fadzli, M. N. (2019) Porosity and density characteristic of double-layer concrete paving blocks incorporating rubber granules. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-7., 244 (012038). ISSN 1755-1315

Ezhilarasu, H. and Ramalingam, Raghavendra and Dhand, Chetna and Lakshminarayanan, Rajamani and Sadiq, Asif and Gandhimathi, Chinnasamy and Ramakrishna, Seeram and Bay, Boon Huat and Venugopal, Jayarama Reddy and Srinivasan, Dinesh Kumar (2019) Biocompatible aloe vera and tetracycline hydrochloride loaded hybrid nanofibrous scaffolds for skin tissue engineering. International Journal of Molecular Sciences, 20 (20). pp. 1-16. ISSN 1661-6596 (print); 1422-0067 (online). (Published)

Ezhilarasu, H. and Sadiq, A. and Ratheesh, G. and Sridhar, S. and Ramakrishna, Seeram and Mohd Hasbi, Ab. Rahim and M. M., Yusoff and Rajan, Jose and Venugopal, Jayarama Reddy (2019) Functionalized core/shell nanofibers for the differentiation of mesenchymal stem cells for vascular tissue engineering. Nanomedicine, 14 (2). pp. 201-214. ISSN 1743-5889. (Published)

Ezihaslinda, Ngah (2019) CMLHS Researchers Shined their Stars at CITREX 2019. CMLHS News . (Unpublished)

Ezihaslinda, Ngah (2019) A Visit by the UMP New Vice Chancellor. CMLHS News . (Unpublished)

Ezihaslinda, Ngah and Siti Hamin, Stapa (2019) Exploring the Relationship between Interactional Competence and Group Oral Communication. International Journal of Language Education and Applied Linguistics (IJLEAL), 9 (2). pp. 55-65. ISSN 2289-7208 (print); 2289-9294 (online). (Published)

Ezrin Hani, Sukadarin and Tong, Sudaratt Pet and Balqis Syahirah, Jamaludin and Junaidah, Zakaria and Nur Syazwani, Mohd Nawi (2019) Work-related musculoskeletal problems and the associated risk factors among rubber tappers: A case study at a village in Northern Peninsular Malaysia. Human Factors & Ergonomics Journal (HFEJ), 4 (2). pp. 29-34. ISSN 2590-3705. (Published)

Ezzuldin, Shihab Saber M. and Syarifah, Abd Rahim and Wan Mohd Hafizuddin, Wan Yussof and Olalere, Olusegun Abayomi and Habeeb, Omar Abed (2019) Morphological, thermal stability and textural elucidation of raw and activated palm kernel shell and their potential use as environmental-friendly adsorbent. Chemical Data Collections, 21. pp. 1-5. ISSN 2405-8300. (Published)

F

F., Benedict and K., Kadirgama and D., Ramasamy and M. M., Noor and Mahendran, Samykano and M. M., Rahman and Zakri, Ghazalli and Sagmesh, B. (2019) Nanocellulose as heat transfer liquid in heat exchanger. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018, 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-9., 2059 (020044). ISBN 978-0-7354-1787-8

Faculty of Engineering Technology, . (2019) OSH Studens won first place in noise and ergonomic category of IH2C intervarsity short video competition organized by department of occupational safety and health (DOSH). Bulletin Ftech, 1 . pp. 1-3.

Fadhlyya Arawaney, Abdul Ghani and Mohd Shahridwan, Ramli and Nor Aida Zuraimi, Md Noar and Abdul Rahman, Mohd Kasim (2019) Mathematical modelling of wave overtopping at vertical structures. In: Journal of Physics: Conference Series, 2nd International Conference on Applied and Industrial Mathematics and Statistics (ICoAIMS 2019), 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-7., 1366 (012046). ISSN 1742-6588 (print); 1742-6596 (online)

Fadwa Sameeha, Ismail and Kamal, Yusoh and Anis Sakinah, Zainal Abidin and Abu Hannifa, Abdullah and Zulhelmi, Ismail (2019) Three different types of tea as surfactant in liquid exfoliation of graphite : Green tea, black tea and oolong tea. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (1). ISSN 1757-8981

Faeiz Azizi, Adnan (2019) Contour generation for mask projection stereolithography 3D printing. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Romlay, Fadhlur Rahman).

Fahad, Ahmed Mohammed and Ahmed, Abdulghani Ali and Alghushami, Abdullah H. and Alani, Sammer (2019) Detection of black hole attacks in mobile ad hoc networks via HSA-CBDS method. In: Intelligent Computing & Optimization. Advances in Intelligent Systems and Computing, 866 . Springer Nature Switzerland, Berlin, Germany, pp. 46-55. ISBN 978-3-030-00979-3

Fahad, Ahmed Mohammed and Ahmed, Abdulghani Ali and M. N. M., Kahar (2019) Network Intrusion Detection Framework Based on Whale Swarm Algorithm and Artificial Neural Network in Cloud Computing. In: ICO 2018: Intelligent Computing & Optimization. Advances in Intelligent Systems and Computing, 866 . Springer Nature, Switzerland, pp. 56-65. ISBN 978-3-030-00979-3

Fahad, Ahmed Mohammed and Alani, Sammer and Mahmood, Sarmad Nozad and Fahad, Nadia Mohammed (2019) NS2 based performance comparison study between DSR and AODV protocols. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.4 S1). pp. 379-393. ISSN 2278-3091. (Published)

Fahim, Fayaz and Long, Giang Bach and Mahadi, Bahari and Trinh, Duy Nguyen and Khanh, B. Vu and Ramesh, Kanthasamy and Chanatip, Samart and Chinh, Nguyen‐Huy and Dai‐Viet, N. Vo (2019) Stability evaluation of ethanol dry reforming on Lanthania‐doped cobalt‐based catalysts for hydrogen‐rich syngas generation. International Journal of Energy Research, 43 (1). pp. 405-416. ISSN 0363-907X (print); 1099-114X (online). (Published)

Fakhriah Hanun, Mohamed Shah (2019) Study of sand brick ratio 1:6 for partial replacement of sand with palm oil clinker (7.5%, 12.5% and 17.5%). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fakhrud, Din and Kamal Z., Zamli (2019) Comparative evaluation of tabu search hyper-heuristic against its low-level meta-heuristic constituents. In: 3rd International Conference On Computational Science And Information Managemant (ICOCSIM19), 20 - 23 March 2019 , Aruna Senggiri Resort And Convention Hotel,Lombok. pp. 1-6.. (Unpublished)

Fakhrud, Din and Kamal Z., Zamli (2019) Pairwise Test Suite Generation Using Adaptive Teaching Learning-Based Optimization Algorithm with Remedial Operator. In: Recent Trends in Data Science and Soft Computing: Proceedings of the 3rd International Conference of Reliable Information and Communication Technology (IRICT2018), 23-24 July 2018 , Kuala Lumpur, Malaysia. pp. 187-195., 843. ISBN 978-3-319-99007-1

Fakhrur Razil Alawi, Abdul Wahid (2019) Characterization and application of torrefied Malaysia biomass as a biofuel for gasification. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Saleh, Suriyati).

Faradila, Naim and Muhammad Aizat, Romaino and Rosyati, Hamid (2019) Enhancement on stain detection for automatic handwashing audit vision system. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018, 27-28 September 2018 , Universiti Malaysia Pahang. pp. 381-389., 538. ISBN 978-981-13-3708-6

Farag, Mohannad and Abdul Nasir, Abd Ghafar and Alsibai, Mohammed Hayyan (2019) Grasping and Positioning Tasks for Selective Compliant Articulated Robotic Arm using Object Detection and Localization: Preliminary Results. In: IEEE 6th International Conference on Electrical and Electronics Engineering (ICEEE 2019), 16-17 April 2019 , Istanbul, Turkey. pp. 284-288.. ISBN 978-1-7281-3910-4

Farag, Mohannad and Abdul Nasir, Abd Ghafar and Alsibai, Mohammed Hayyan (2019) Real-time robotic grasping and localization using deep learning-based object detection technique. In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), 29 June 2019 , Shah Alam, Selangor, Malaysia. pp. 139-144.. ISBN 978-1-7281-0784-4

Farag, Mohannad and Alsibai, Mohammed Hayyan and Norsinnira, Zainul Azlan and Abdul Nasir, Abd Ghafar (2019) Slippage Detection for Grasping Force Control of Robotic Hand Using Force Sensing Resistors. In: ICCTA 2019 Proceedings of the 2019 5th International Conference on Computer and Technology Applications, 16-17 April 2019 , Istanbul, Turkey. pp. 1-5.. ISBN 978-1-4503-7181-0

Farah Adiba, Azman (2019) Camera geometry determination based on circular's shape for peg-in-hole task. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daud, Mohd. Razali).

Farah Amalina, Ishak and Muhammad Haziq, Jamil and Abdul Syukor, Abd Razak and Ab Hamid, Mohd Rashid and Nadzirah Izzati, K. A. (2019) Development of Capra Hircus Feed from Waste to Wealth by Utilize Artocarpus Heterophyllus Leaves and Palm Acid Oil (PAO) from Palm Oil Mill Effluence (POME). In: Energy Security And Chemical Engineering Congress (ESCHE) 2019, 17-19 July 2019 , Parkroyal Resort, Penang, Malaysia. pp. 1-13..

Farah Amalina, Ishak and Muhammad Haziq, Jamil and Abdul Syukor, Abd Razak and Ab Hamid, Mohd Rashid and Nadzirah Izzati, K. A. (2019) Formulation of Capra Hircus feed to utilize Artocarpus Heterophyllus Leaves and Palm Acid Oil (PAO). In: Energy Security And Chemical Engineering Congress (ESCHE) 2019, 17-19 July 2019 , Parkroyal Resort, Penang, Malaysia. pp. 1-7.. (Unpublished)

Farah Amalina, Ishak and Muhammad Haziq, Jamil and Abdul Syukor, Abd Razak and Ahmad Ridwan, Ahmad Faisal and Ab Hamid, Mohd Rashid (2019) Study of Palm Acid Oil (PAO) from Sludge Palm Oil Mill Effluent (POME) as Goat’s Feed. In: 11th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2019), 19-20 November 2019 , Kuantan, Pahang. pp. 1-8.. (Unpublished)

Farah Amira, Adnan (2019) Absorption and strengh of concrete containing of woodblock as partially coarse aggregates. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Farah Hanani, Zulkifli and Jahir Hussain, Fathima Shahitha and W. S., Wan Harun and M. M., Yusoff (2019) Highly porous of hydroxyethyl cellulose biocomposite scaffolds for tissue engineering. International Journal of Biological Macromolecules, 122. pp. 562-571. ISSN 0141-8130. (Published)

Farah Salwati, Ibrahim and Nur Diyana, Shariff and Muneera, Isa and Abdul Rahimi, Abdul Rahman (2019) The barriers factors and driving forces for BIM implementation in Malaysian AEC companies. Journal of Advanced Research in Dynamical and Control Systems, 11 (8 special). pp. 275-281. ISSN 1943-023X. (Published)

Faraj, Moneer A (2019) Enhancement of eddy current testing probe for crack detection and lift-off compensation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Faraj, Moneer A. and Fahmi, Samsuri and Abdalla, Ahmed N. and Rifai, Damhuji and Kharudin, Ali and Al-Douri, Y. (2019) Hybrid GMR/IR probe to reduce the effects of lift-off. Measurement and Control, 52 (5-6). pp. 588-598. ISSN 0020-2940. (Published)

Farghaly, Alaa Taiseer and Mazlina, Abdul Majid (2019) A study on Green IT awareness among University Malaysia Pahang students. In: The International Conference on E-Learning (ICOEL2019), 21-22 August 2019 , Universiti Malaysia Sarawak (UNIMAS), Sarawak, Malaysia. pp. 1-9..

Farhadi, Bita and Marriam, Ifra and Yang, Shengyuan and Zhang, Hui and Tebyetekerwa, Mike and Zhu, Meifang and Ramakrishna, Seeram and Rajan, Jose and Zabihi, Fatemeh (2019) Highly efficient photovoltaic energy storage hybrid system based on ultrathin carbon electrodes designed for a portable and flexible power source. Journal of Power Sources, 422. pp. 196-207. ISSN 0378-7753 (Print), 1873-2755 (Online). (Published)

Farhan, Mohd Said and Mohamad Al Aamin, Razali (2019) Effect of factors on the red pigment production in the stirred drum bioreactor: fractional factorial design approach. In: AIP Conference Proceedings: Proceedings Of The 2nd International Conference On Biosciences And Medical Engineering (ICBME2019), 11-12 April 2019 , Bali, Indonesia. pp. 1-8., 2155 (020008). ISBN 978-073541900-1

Farhan, Mohd Said and Nor Farhana, Hamid (2019) Natural red colorant via solid-state fermentation of oil palm frond by Monascus purpureus FTC 5356: effect of operating factors. Journal of Engineering Science and Technology, 14 (5). pp. 2576-2589. ISSN 1823-4690. (Published)

Farhana, K. and K., Kadirgama and M. M., Noor and M. M., Rahman and D., Ramasamy and Mahamude, A. S. F. (2019) CFD modelling of different properties of nanofluids in header and riser tube of flat plate solar collector. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012041). ISSN 1757-899X

Farhana, K. and K., Kadirgama and M. M., Rahman and D., Ramasamy and M. M., Noor and G., Najafi and M., Samykano and A. S. F., Mahamude (2019) Improvement in the performance of solar collectors with nanofluids - A state-of-the-art review. Nano-Structures & Nano-Objects, 18. pp. 1-21. ISSN 2352-507X. (Published)

Farhana, K. and K., Kadirgama and M. M., Rahman and M. M., Noor and D., Ramasamy and M., Samykano and G., Najafi and Nor Azwadi, Che Sidik and F., Tarlochan (2019) Significance of alumina in nanofluid technology. Journal of Thermal Analysis and Calorimetry. pp. 1-20. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Farhana, K. and Mahamude, A. S. F. and K., Kadirgama and M. M., Rahman and M. M., Noor and D., Ramasamy (2019) Internal energy analysis with nanofluids in header and riser tube of flat plate solar collector by CFD modelling. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012069). ISSN 1757-899X

Farhana, Kaniz (2019) Design and development of highly efficient nano fluidic flat plate solar collector. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kadirgama, Kumaran).

Farida Hamimi, Ismasafie (2019) Investigation on the impact of speed humps towards travel delays in rural roads. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Faridah, Taju Rahim and Yuserrie, Zainuddin (2019) The impact of technological innovation capabilities on competitive advantage and firm performance in the automotive industry in Malaysia. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018, 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-13., 2059 (02003). ISBN 978-0-7354-1787-8

Farkhana, Muchtar and Abdullah, Abdul Hanan and Hassan, Suhaidi and Khader, Ahamad Tajudin and Kamal Z., Zamli (2019) Energy conservation of content routing through wireless broadcast control in NDN based MANET: A review. Journal of Network and Computer Applications, 131. pp. 109-132. ISSN 1084-8045. (Published)

Farouk, A M and Romali, N S and Rahman, R A and M A, Seman (2019) Optimization techniques for rehabilitating water distribution networks. International Conference of Sustainable Earth Resources Engineering 2020, 641 (1). 012-019. ISSN 10.1088. (Published)

Farouq, Ahmat (2019) Effect of leaching reagent on leaching process of europium, terbium and yttrium from liquid crystal display. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Farra Intan Syamira, Zulkifli (2019) Analysis of water profile at the Bukit Kuang bridge, Kemaman. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Farzana, Dusuki (2019) Design and development of innovative ceiling fan cleaner. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Fasya Rafiqa, Saice (2019) Infrared based technology to determine strength of concrete. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Fathie, Ahmad Zakil and Mohd Shafiq, Mohd Sueb and Ruzinah, Isha (2019) Growth and yield performance of pleurotus ostreatus on various agro-industrial wastes in Malaysia. In: AIP Conference Proceedings: Proceedings Of The 2nd International Conference On Biosciences And Medical Engineering (ICBME2019), 11-12 April 2019 , Bali, Indonesia. pp. 1-8., 2155 (020055). ISSN 0094-243X ISBN 978-0-7354-1900-1

Fatimah, Abdul Rashid and Hasmadi, Hassan (2019) Analisis perbezaan tahap kesediaan guru terhadap 1Bestarinet dari aspek jantina, bangsa dan usia. International Journal of Humanities Technology and Civilization (IJHTC), 1 (6). pp. 31-39. ISSN 2289-7216. (Published)

Fatimah, Ali and Noor Raha, Mohd Radzuan and Nor Suhardiliana, Sahar and Zuraina, Ali (2019) The grammatical competence of university students: Importance versus performance using Rasch analysis. In: 7th Global Conference On Linguistics And Foreign Language Teaching (LINELT-2019), 29 April-1 May 2019 , Kusadasi Izmir, Turkey. pp. 1-10..

Fatimah, Mahmud and Nik Anis, Nik Azemi (2019) Factors influencing employee perception on performance management system. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 537-550., 2019. ISSN 2518-668X

Fatimah, Mahmud and Puteri Fadzline, Muhamad Tamyez and Mohamad Farizuan, Mohd Nor (2019) Determinants in developing a learning factory in higher educational institution. International Journal of Recent Technology and Engineering, 8 (2S7). pp. 189-192. ISSN 2277-3878. (Published)

Fatimah, Shamsudin and Abdul Muiz, Moktar and Syamsul Bahari, Abdullah (2019) Managing solid waste using chloride-based ionic liquids. International Journal of Environmental Analytical Chemistry, 99 (14). pp. 1484-1493. ISSN 0306-7319. (Published)

Fatin Atiqah, Rasdin (2019) Effective bracing system for telecommunication towers. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Farisha Alia, Azmi and Mohd Fakhrul Zamani, Abdul Kadir and Aziz, Shujahadeen B. and Saifful Kamaluddin, Muzakir (2019) Characterization of opto-electronic properties of thermally evaporated ZnO. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018, AMC 2018, 27-28 November 2018 , Kuching, Sarawak. pp. 179-184., 29. ISSN 2214-7853

Fatin Farisha Alia, Azmi and Sahraoui, Bouchta and Saifful Kamaluddin, Muzakir (2019) Study of ZnO Nanospheres Fabricated via Thermal Evaporation for Solar Cell Application. Makara Journal of Technology, 23 (1). pp. 11-15. ISSN 2355-2786. (Published)

Fatin Hakimah, Sharifuddin and Kassa, Freselam Mulubrhan and Gebremariam, M. A. and Azmir, Azhari and Alemu, Tamiru (2019) Process simulation modelling and improvement on energy consumptions efficiency. In: 2019 IEEE 7th Conference on Systems, Process and Control (ICSPC), 13 - 14 December 2019 , Melaka. pp. 76-79. (9067991). ISBN 978-172811826-0

Fatin Nabila, Abllah (2019) Assessment of the best representative concentration pathways (RCPs) for northern Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Nur Afifah, Che Hazahar (2019) Mobile danger info system (MDIS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Fatin Nurwahda, Ahmad and Norazlianie, Sazali and Mohd Hafiz Dzarfan, Othman (2019) Review on Development of Oxygen/Nitrogen Separations Technologies. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (2). pp. 249-259. ISSN 2289-7879. (Published)

Fatin Nurwahda, Ahmad and Norazlianie, Sazali and Safwan, Shabi and Nor Hasrul Akhmal, Ngadiman and Mohd Hafiz Dzarfan, Othman (2019) Oxygen separation process using ceramic-based membrane: A review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 1-9. ISSN 2289-7879. (Published)

Fatin Zafirah, Mansur and C. K. M., Faizal and Atnaw, Samson M. and Shaharin Anwar, Sulaiman (2019) Performance modelling and validation on the co-gasification of coal and sawdust pellet in research-scale downdraft reactor. In: Sustainable Energy Towards the New Revolution: Proceedings of the 18th International Conference on Sustainable Energy Technologies, 20-22 August 2019 , Kuala Lumpur, Malaysia. pp. 87-98., 3. ISBN 9780853583318

Fatin Zafirah, Mansur and C. K. M., Faizal and Noor Asma Fazli, Abdul Samad and Atnaw, Samson M. and Shaharin, Sulaiman (2019) Experimental studies on gasification performance of sawdust and sawdust pellet in a downdraft biomass gasifier. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 5 (2). pp. 22-28. ISSN 0126-8139. (Published)

Fatin Zafirah, Mansur and C. K. M., Faizal and Noor Asma Fazli, Abdul Samad and Atnaw, Samson M. and Shaharin Anwar, Sulaiman (2019) Performance modelling and validation on co-gasification of coal and sawdust pellet in research-scale downdraft reactor. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-15., 702 (012023). ISSN 1757-899X

Fatkhurrahman, Manani and Siti Zubaidah, Ismail (2019) Product-service system inventory control for Malaysian Palm Oil Industry: A case study utilizing IDEF0 modelling. iMEC-APCOMS 2019. pp. 153-158. ISSN 978-981-15-0949-0. (Published)

Fatmawati, Adam (2019) CSR PAKAD bimbing pelajar SPM kuasai subjek Sains. UMP News .

Fatmawati, Adam (2019) PAKAD holds workshop to help SPM students master Science subjects. UMP News .

Fatmawati, Adam and M. H., Sulaiman and Zulkefli, Yaacob and Z. M, Noor (2019) Development of ionic salt for calcite and barite solid scale dissolution. In: Energy Security And Chemical Engineering Congress 2019 (ESCHE 2019), 17-19 Julai 2019 , Parkroyal Resort, Penang, Malaysia. pp. 1-2.. (Unpublished)

Fauziah, Zainuddin (2019) Framework of informal specification validation with visual specification and human factor involvement to improve requirement specification quality. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fauziah, Zainuddin and Ruzaini, Abdullah Arshah and Rozlina, Mohamed (2019) Software visual specification for requirement engineering education. In: 10th International Conference on E-Education, E-Business, E-Management and E-Learning, IC4E 2019, 10 - 13 Januari 2019 , Waseda University; Tokyo, Japan. pp. 1-6.. ISBN 978-145036602-1

Fayaz, Fahim (2019) Syngas production from ethanol dry reforming over La and Ce promoted Co/Al2O3 catalysts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fazal, Muhammad Ishtiaq (2019) Investigating the role of student teams-achievement divisions (STAD) on Saudi undergraguates’ motivation and vocabulary. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fazeeda, Mohamad and Siti Filza, Saharin (2019) Application of discrete event simulation (DES) for queuing system improvement at hypermarket. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 330-346.. ISSN 2518-668X

Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. (2019) Occupational ergonomics risk factors prioritization using integrated analytical hierarchy process (AHP) approach: a study of a local automotive component manufacturer. Human Factors & Ergonomics Journal (HFEJ), 4 (2). pp. 1-14. ISSN 2590-3705. (Published)

Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. (2019) Participatory Ergonomics Intervention for Exploring Risk Factors Lead to Work-Related Musculoskeletal Disorders Among Automotive Production Workers. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems, 21-22 August 2019 , Putrajaya, Malaysia. pp. 278-283.. ISBN 978-981-15-0950-6

Fazliana, Fauzun and S. N., Aqida and Izwan, Ismail (2019) Design of laser melting of tool steel for surface integrity enhancement. Jurnal Tribologi, 22. pp. 18-31. ISSN 2289-7232. (Published)

Felayati, Frengki Mohamad and Semin, . and Cahyono, Beny and R. A., Bakar (2019) Numerical study of dual fuel engine using proportional natural gas split injection. In: AIP Conference Proceedings: Proceedings of the 4th International Conference on Mechanical Engineering (ICOME2019), 28-29 August 2019 , Yogyakarta, Indonesia. pp. 1-5., 2187 (020018). ISSN 0094-243X ISBN 978-0-7354-1934-6

Fernando, Yudi and Achmad, Syarif and Gui, Anderes (2019) Leveraging business competitiveness by adopting cloud computing in Indonesian creative industries. International Journal of Business Environment, 32 (3). pp. 364-392. ISSN 1740-0597. (Published)

Fernando, Yudi and Fasihah, Elias and Muhammad Shabir, Shaharudin and Rajan, Jose (2019) Transforming Food Waste into Value Added Products: A Circular Economy Analysis of Malaysian. In: Proceeding of Nano-Micromaterials for Circular economy and Sustainability in the East Asia Pacific, 29 August - 1 September 2019 , National University of Singapore, Singapore. pp. 1-13..

Fernando, Yudi and Fasihah, Elias and Muhammad Shabir, Shaharudin and Rajan, Jose (2019) Transforming food waste into value added products: A circular economy analysis of Malaysian fisheries sector. In: Proceeding of Nano-Micromaterials for Circular economy and Sustainability in the East Asia Pacific, 29 August - 1 September 2019 , National University of Singapore, Singapore. pp. 1-13..

Fernando, Yudi and Gui, Anderes and Ika Sari, Wahyuni-TD and Seo, Yong Won and Hasnah, Haron (2019) Supplier sustainable integrity using a split-half method: Empirical evidence from Malaysia. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 579-592.. ISSN 2518-668X

Fernando, Yudi and Jabbour, Charbel Jose Chiappetta and Noor Asnida, Amri and Mohd Ridzuan, Darun (2019) The effects of social sustainable supply chain management practices on societal value and carbon footprint reduction: implications for fisherman ecosystems. In: 2019 International Conference On Resource Sustainability - CITIES (ICRS CITIES 2019), 1 - 3 Julai 2019 , University of Adelaide, Australia. pp. 1-12.. (Unpublished)

Fernando, Yudi and Jabbour, Charbel Jose Chiappetta and Wah, Wen Xin (2019) Pursuing green growth in technology firms through the connections between environmental innovation and sustainable business performance: Does service capability matter? Resources, Conservation and Recycling, 141. pp. 8-20. ISSN 0921-3449. (Published)

Fernando, Yudi and Muhamad Fairuz, Ahmad Jasmi and Muhammad Shabir, Shaharudin (2019) Maritime green supply chain management: its light and shadow on the bottom line dimensions of sustainable business performance. International Journal of Shipping and Transport Logistics, 11 (1). pp. 60-93. ISSN 1756-6525. (Published)

Filzah Lina, Mohd Safeiee and Abu, Mohd Yazid and Nik Nurharyantie, Nik Mohd Kamil and Nurul Farahin, Zamrud (2019) Development of a new costing structure in production environment using activity based costing. In: The 4th International Conference on Engineering Technology 2019 (ICET 2019), 6-7 July 2019 , TATI University of College, Terengganu. pp. 1-6.. (In Press / Online First)

Fiorini, Paula De Camargo and Jabbour, Charbel Jose Chiappetta and Jabbour, Ana Beatriz Lopes de Sousa and Stefanelli, Nelson Oliveira and Fernando, Yudi (2019) Interplay between information systems and environmental management in ISO 14001-certified companies: Implications for future research on big data. Management Decision, 57 (8). pp. 1883-1901. ISSN 0025-1747. (Published)

Firdaus, Ahmad and Mohd Faizal, Ab Razak and Feizollah, Ali and Hashem, Ibrahim Abaker Targio and Mohamad, Hazim and Nor Badrul, Anuar (2019) The rise of “blockchain”: bibliometric analysis of blockchain study. Scientometrics, 120 (3). pp. 1289-1331. ISSN 0138-9130. (Published)

Foo, K. and Liang, Y. Y. and Weihs, G. A. Fimbres (2019) CFD study of the effect of SWM feed spacer geometry on mass transfer enhancement driven by forced transient slip velocity. Journal of Membrane Science. pp. 1-13. ISSN 0376-7388. (In Press / Online First) (In Press / Online First)

Foo, Voon Hong (2019) Nitrogen removal efficiency in slaughterhouse wastewater by using upflow microaerobic sludge reactor. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fradinata, E. and Suthummanon, S. and Suntiamorntut, W. and M. M., Noor (2019) Compare the forecasting method of artificial neural network and support vector regression model to measure the bullwhip effect in supply chain. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 4816-4834. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Fuzlin, A. F. and Bakri, Hassan and Sahraoui, B. and Ahmad Salihin, Samsudin (2019) Study on the effect of lithium nitrate in ionic conduction properties based alginate biopolymer electrolytes. Materials Research Express, 7 (015902). pp. 1-15. ISSN 2053-1591. (Published)

Fuzlin, A.F. and Nagao, Y. and I. I., Misnon and A. S., Samsudin (2019) Studies on structural and ionic transport in biopolymer electrolytes based on alginate-LiBr. Ionics, 26. pp. 1923-1938. ISSN 1862-0760. (Published)

fazurawati, Che Lah (2019) Asah bakat penulisan kreatif. Harian Metro . p. 38.

G

G. G., Giwangkara and A., Mohamed and N. H. A., Khalid and H. M., Nor and Mohd Rosli, Hainin and Putra Jaya, Ramadhansyah and W. N. H. M., Sani and C. R., Ismail and M. M. A., Aziz (2019) Recycled concrete aggregate as a road base material. In: IOP Conference Series: Materials Science and Engineering, 11th International Conference on Geotechnical Engineering in Tropical Regions (GEOTROPIKA), 27-28 February 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 527 (012061). ISSN 1757-8981 (Print), 1757-899X (Online)

Gaanty Pragas, Maniam and Natanamurugaraj, Govindan and Mohd Hasbi, Ab. Rahim and M. M., Yusoff (2019) Towards a sustainable renewable energy. In: 2nd International Conference on Global Initiatives for Sustainable Development: Issues and Strategies, 24-25 June 2019 , Bangkok, Thailand. pp. 1-6.. (Unpublished)

Gabar, Salah Masoud Saleh Gabar (2019) Study on water and soil quality source apportionment of pollution loading and community engagement for integrated catchment management of Gebeng Industrial Estate, Pahang, Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gan, Leong Ming (2019) UMP partners with KOCEL to leverage global online learning platform. UMP News . (Unpublished)

Gan, Leong Ming and Adzhar, Kamaludin and Muhammad Azrin, Ahmad and Mohd Shahri, Mohd Akhir and Rosyafieka, Rosli and Nurliyana Najwa, Jamaludin and Shahrul, Mohamed Salleh (2019) UMP Global Classroom: Beyond Boundary Learning. In: Proceedings Of The International University Carnival On E-Learning (IUCEL) 2019, 21-22 August 2019 , DeTAR Putra, Universiti Malaysia Sarawak,Kota Samarahan, Sarawak, Malaysia. p. 331.. ISBN 978-967-2298-08-3

Ghawanmeh, Abdullah A. and Al-Bajalan, Hussein M. and Mackeen, Mukram Mohamed and Alali, Feras Q. and K. F., Chong (2019) Recent developments on (−)-colchicine derivatives: Synthesis and structure-activity relationship. European Journal of Medicinal Chemistry, 185 (111788). pp. 1-16. ISSN 0223-5234. (Published)

Ghawanmeh, Abdullah A. and Ali, Gomaa A. M. and Algarni, H. and Sarkar, Shaheen M. and K. F., Chong (2019) Graphene oxide-based hydrogels as a nanocarrier for anticancer drug delivery. Nano Research, 12 (5). pp. 973-990. ISSN 1998-0124 (Print), 1998-0000 (Online). (Published)

Ghazali, M. F. and Nizwan, Che Ku Eddy and Ismail, Nurazima and Sani, M. S.M. and Yusof, Mohd Fadhlan M. and Mohamed, Zamri (2019) Hydraulic characterization of PVC-O pipes by means of transient tests. , [Research Report: Research Report] (Unpublished)

Ghosal, Kajal and Das, Arijit and Kumar Das, Sanjoy and Mahmood, Syed and Ramadan, Mohamed Abdel Monem and Thomas, Sabu (2019) Synthesis and characterization of interpenetrating polymeric networks based bio-composite alginate film: A well-designed drug delivery platform. International Journal of Biological Macromolecules, 130. pp. 645-654. ISSN 0141-8130. (Published)

Giahi, Masoud and Pathania, Deepak and Agarwal, Shilpi and Ali, Gomaa A. M. and K. F., Chong and Gupta, Vinod Kumar (2019) Preparation of Mg-doped TiO2 nanoparticles for photocatalytic degradation of some organic pollutants. Studia Universitatis Babes-Bolyai, Chemia, 64 (1). pp. 7-18. ISSN 1224-7154. (Published)

Gimbun, J. and Nguang, S.L. and Pang, S.F. and Yeong, Y.L. and Kee, K.L. and Chin, S.C. (2019) Assessment of phenolic compounds stability and retention during spray drying of phyllanthus niruri extracts. Industrial and Engineering Chemistry Research, 58 (2). pp. 752-761. ISSN 0888-5885. (Published)

Gisen, Jacqueline Isabella Anak and Wafty, Abd Rahman and Ahmad Amirul Faiz, Ahmad Tajudin (2019) Investigation of the current salt intrusion condition in the Kuantan estuary and the efficiency of the Kuantan barrage. , [Research Report: Research Report] (Unpublished)

Gnaneshwar, Puvala Vijayakumar and Sudakaran, Shruthi Vathaluru and Abisegapriyan, Sivasubramanian and Sherine, Jositta and Ramakrishna, Seeram and Mohd Fadzil, Abdul Rahim and M. M., Yusoff and Rajan, Jose and Venugopal, J. (2019) Ramification of zinc oxide doped hydroxyapatite biocomposites for the mineralization of osteoblasts. Materials Science and Engineering: C, 96. pp. 337-346. ISSN 0928-4931. (Published)

Goh, P. S. and Rosmawati, Naim and Rahbari-Sisakht, M. and Ahmad Fauzi, Ismail (2019) Modification of membrane hydrophobicity in membrane contactors for environmental remediation. Separation and Purification Technology, 227. pp. 1-2. ISSN 1383-5866. (Published)

Gui, Anderes and Fernando, Yudi and Aditya Septiani, Wiwoho and Bambang, Leo Handoko and Hasnah, Haron (2019) The influence of internal control, leadership style, and teamwork to information system project success. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 593-602., 2019. ISSN 2518-668X

Gul, Yasmeen and Sultan, Zahid and Moeinaddini, Mehdi and Jokhio, Gul A. (2019) The effects of socio-demographic factors on physical activity in gated and non-gated neighbourhoods in Karachi, Pakistan. Sport in Society, 22 (7). pp. 1225-1239. ISSN 1743-0437. (Published)

Gurrib, Ikhlaas and Kweh, Qian Long and Nouranic, Mohammad and Irene, Wei Kiong Ting (2019) Are cryptocurrencies affected by their asset class movements or news announcements? Malaysian Journal of Economic Studies, 56 (2). pp. 201-225. ISSN 1511-4554. (Published)

H

H., Badli and Md Noor, Ariffin and Siti Zubaidah, Sulaiman and Susaidevas, Jlyas and Nur Atikah, Mahamad and Nazrah Asyhiqin, Mahamad Khariol Nizar (2019) Assessment on the severity of low density polyethylene (LDPE)/Ethylene hybrid explosion. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (012050). ISSN 1757-8981

H., Ibrahim and Norazlianie, Sazali and I. N., Ibrahim and Mohd Syafiq, Sharip (2019) Nano-structured Cellulose as Green Adsorbents for Water Purification: A Mini Review. Journal of Applied Membrane Science & Technology, 23 (2). pp. 45-56. ISSN 2600-9226. (Published)

H., Lago and Z., Zakaria and M. F., Jamlos and P. J., Soh (2019) A wideband reconfigurable folded planar dipole using MEMS and hybrid polymeric substrates. AEU - International Journal of Electronics and Communication, 99. pp. 347-353. ISSN 1434-8411. (Published)

H., Tarizan and M., Ishak and Quazi, M. M. and Qaban, A. (2019) Friction stir welding of AZ31B magnesium alloy with ER4043 aluminium alloy filler. In: Proceedings of ARSSS International Conference, 18th November, 2019 , Oxford, United Kingdom. pp. 1-3..

H., Yunita and N., Al Huda and T., Saidi and A., Yuliannur and B., Setiawan and Putra Jaya, Ramadhansyah and Mohamad Idris, Ali (2019) Site-specific ground response analysis at a site in the affected area of the 2016 Pidie Jaya earthquake. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 78-87..

H. A., Roslan and M. I., Adiyanto and S. A. H. S., Mustapa and T. A., Majid and N. S. H., Harith (2019) Increment of Steel Tonnage for Reinforced Concrete School Building Considering Seismic Design. International Journal of Recent Technology and Engineering, 8 (3S3). pp. 351-355. ISSN 2277-3878. (Published)

H. A., Salaam and M. S., H. Jaman and Ramli, Junid (2019) Sustainability performance model: a case study of pneumatic nipple hose connector. In: International Conference on Mechanical Engineering Research (ICMER) 2019, 30 - 31 Julai 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-8.. (Unpublished)

H. L., Zakaria and Kamal Z., Zamli and Fakhrud, Din (2019) Hybridmigrating birds algorithm starategy for t-way test suite generation. In: 3rd International Conference On Computational Science And Information Managemant (ICOCSIM19), 20 - 23 March 2018 , Aruna Senggiri Resort And Convention Hotel,Lombok. pp. 1-6.. (Unpublished)

Habib, Ahsan and Islam, Md. Milon and M. Nomani, Kabir and Mredul, Motasim Billah and Hasan, Mahmudul (2019) Staircase Detection to Guide Visually Impaired People: A Hybrid Approach. Revue d'Intelligence Artificielle, 33 (5). pp. 327-334. ISSN 0992499X. (Published)

Hadi Al-Hamed, Hashem Talal (2019) Effects of shear reinforcement to reinforced concrete beam behaviour. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hafiz Ashrawi, Baharun (2019) The effectiveness of tires chips in gabion wall for slope protection. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hafizi, Z. M. and Nizwan, Che Ku Eddy and Ghazali, M. F. and Idris, Daing Mohamad Nafiz and Sani, M. S.M. (2019) A development of a damage monitoring system using an embedded fiber Bragg grating sensors. , [Research Report: Research Report] (Unpublished)

Hafizoah, Kassim (2019) Strategizing Learning Experience through E-Learning Platforms to Enhance Creative Potential and Language Performance. In: Proceedings of the International Conference on Language Teaching and Learning Today 2019, 25-27 April 2019 , Ho Chi Minh City University of Technology and Education, Vietnam. pp. 22-35.. ISBN 978-604-73-6849-5

Hafizoah, Kassim and Asiah, Kassim (2019) Embracing the Internet of Things for Language Education: Are We There Yet? In: Industrial Revolution 4.0: A Future Outlook. UMP Press, Kuantan, Pahang, pp. 86-105. ISBN 978-967-2226-50-5

Hagos, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman and R., Mamat (2019) Engine speed and air-fuel ratio effect on the combustion of methane augmented hydrogen rich syngas in DI SI engine. International Journal of Hydrogen Energy, 44 (1). pp. 477-486. ISSN 0360-3199. (Published)

Hagos, Ftwi Yohaness and Zailan, Roziah and Kulkarni, R. R. and Singh, Lakhveer (2019) Syngas generation from thermochemical conversion of locally available biomass waste for automotive. , [Research Report: Research Report] (Unpublished)

Hairul, Bakri and Mohd Adnin, Hamidi and Mohd Shukri, Yob (2019) Finite Element Analysis on critical relative slippage of bolted joint under transverse loading. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019, 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 172-173.. ISBN 978-967-2145-65-3 (online)

Hajar, Mohamed A. and Daing Nasir, Ibrahim and Al-Sharafi, Mohammed A. (2019) Value Innovation in the Malaysian Telecommunications Service Industry: Case Study. In: Recent Trends in Data Science and Soft Computing: Proceedings of the 3rd International Conference of Reliable Information and Communication Technology (IRICT 2018). Advances in Intelligent Systems and Computing, 843 . Springer Nature, Switzerland, pp. 892-901. ISBN 978-3-319-99007-1

Hajar Fauzan, Ahmad and Schreiber, Lars and Marshall, Ian P. G. and Andersen, Philip Junker and Castro-Mejía, Josué Leonardo and Nielsen, Dennis Sandris (2019) Draft genome sequence of streptococcus anginosus strain CALM001, isolated from the gut of an elderly dane. Microbiology Resource Announcements, 8 (24). pp. 1-2. ISSN 2576-098X. (Published)

Halim, Ahmad Zamani Abdul (2019) Synthesis and characterization novel magnetic nanoparticle (MNPS) metal based catalyst for carbon dioxide treatment in flue gases power plant. , [Research Report: Research Report] (Unpublished)

Halizan, Mohmood (2019) STEM@UMP inisiatif transformasi generasi abad ke-21. UMP News . (Unpublished)

Hamada, Hussein M. and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Humada, Ali Mahmood (2019) Comparison study between POFA and POCP in terms of chemical composition and physical properties - review paper. In: International Conference on Agricultural Technology, Engineering and Environmental Sciences, ICATES 2019, 21-22 August 2019 , Banda Aceh, Indonesia. pp. 1-8., 365 (1). ISSN 1755-1307

Hamada, Hussein M. and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Humada, Ali Mahmood (2019) Effect of incorporation POFA in cement mortar and desired benefits: a review. In: International Conference on Agricultural Technology, Engineering and Environmental Sciences, ICATES 2019, 21-22 August 2019 , Banda Aceh, Indonesia. pp. 1-11., 365 (012060). ISSN 1755-1307 (Print); 1755-1315 (Online)

Hamada, Hussein M. and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Jokhio, Gul A. and Humada, Ali M. (2019) Fresh and hardened properties of palm oil clinker lightweight aggregate concrete incorporating Nano-palm oil fuel ash. Construction and Building Materials, 214. pp. 344-354. ISSN 0950-0618. (Published)

Hamed Al-Rafaei, Abdul Al-Aziz and Zumrah, Abdul Rahim and Ali Alsamawi, Mohamed Abdulwali and Ali Alshuhumi, Said Rashid (2019) A Multi-Group Analysis of the Effect of Organizational Commitment on Higher Education Services Quality. International Journal of Business Society, 2 (10). pp. 40-48. (Published)

Hamid, A. Jalab and Subramaniam, Thamarai and Rabha, W. Ibrahim and Kahtan, Hasan and Nurul F., Mohd Noor (2019) New texture descriptor based on modified fractional entropy for digital image splicing forgery detection. Entropy, 21 (4). pp. 1-9. ISSN 1099-4300. (Published)

Hamid, N. H. and Azmi, I. F. and Haryati, Awang (2019) Seismic response of precast and IBS buildings under earthquake attacks. In: International Conference on Agricultural Technology, Engineering and Environmental Sciences, ICATES 2019, 21-22 August 2019 , Banda Aceh, Indonesia. , 365 (1). ISSN 1755-1307

Hamid, N. H. and Azmi, I. F. and Tiong, P. L. Y. and Haryati, Awang (2019) Special based isolation system for low-rise RC building. In: International Conference on Agricultural Technology, Engineering and Environmental Sciences, ICATES 2019, 21-22 August 2019 , Banda Aceh, Indonesia. pp. 1-8., 365 (1). ISSN 1755-1307

Hamidah, Abdullah and Khan, Md. Maksudur Rahman and Zahira, Yaakob and Nur Aminatulmimi, Ismail (2019) A kinetic model for the photocatalytic reduction of CO2 to methanol pathways. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012026). ISSN 1757-8981

Hamir Hamzah, Jaafar and Mohamad Hilmi, Mat Said (2019) Inovasi pengajaran untuk menarik minat pelajar menguasai ilmu tajwid. International Journal of Humanities Technology and Civilization (IJHTC), 1 (6). pp. 8-17. ISSN 2289-7216. (Published)

Hamisa, A. H. and Azmi, W. H. and N. N. M., Zawawi and Sharif, M. Z. and Shaiful, A. I. M. (2019) Comparative study of single and composite nanolubricants in automotive air-conditioning (AAC) system performance. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-11., 469 (012044). ISSN 1757-899X

Hamizah, Badiran (2019) 35 terima biasiswa Baitulmal. Harian Metro . p. 14.

Hamizatun, Mohd Fazi and N. M. Zuki, N. M. and Azizul Qayyum, Basri (2019) Risks assessment at automotive manufacturing company and ergonomic working condition. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012106). ISSN 1757-8981 (Print); 1757-899X (Online)

Hammood, Omar A. and M. N. M., Kahar and Mohammed, Muamer N. (2019) RESP: Relay suitability-based routing protocol for video streaming in vehicular Ad Hoc Networks. International Journal of Computers Communications & Control, 14 (1). pp. 21-38. ISSN 1841-9836. (Published)

Hammood, Rasheed Abed and Sharifah Maszura, Syed Mohsin (2019) Effect use of steel fiber on mechanical properties of concrete mixture. In: IOP Conference Series: Earth and Environmental Science, International Conference on Agricultural Technology, Engineering and Environmental Sciences, 21-22 August 2019 , Banda Aceh, Indonesia. pp. 1-9., 365 (012061). ISSN 1755-1307

Hammood, Rasheed Abed and Sharifah Maszura, Syed Mohsin (2019) Mechanical properties of sustainable concrete due to the use of steel-kenaf fiber. In: International Conference on Agricultural Technology, Engineering, and Environmental Sciences (ICATES 2019, 21-22 August 2019 , Banda Aceh, Indonesia. pp. 1-9.. (Unpublished)

Hamza, Nidal Abdelgadir Ahmed and Mazlina, Abdul Majid and Al-Bashiri, Hael (2019) Reducing the throughput time for patient flow in emergency department: simulation and modelling overview. In: IOP Conference Series: Materials Science and Engineering, The 6th International Conference on Software Engineering & Computer Systems, 25-27 September 2019 , Pahang, Malaysia. pp. 1-8., 769 (012013). ISSN 1757-8981 (Print), 1757-899X (Online)

Hamza, Nidal Abdelgadir Ahmed and Mazlina, Abdul Majid and Khalid, Adam and Noor Akma, Abu Bakar (2019) A review on simulation and modelling for patient flow in the emergency department. In: International Conference On Applied Computing (ICAC2019), 4-5 Feb 2019 , Bangkok, Thailand. pp. 1-9., 551 (1). ISSN 1757-8981

Hamzah, Ahmad and Ahmad Nuur Fakrullah, Mohamad Pajeri and Nur Aqilah, Othman and Mohd Mawardi, Saari and Mohd Syakirin, Ramli (2019) Analysis of mobile robot path planning with artificial potential fields. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018, 27-28 September 2018 , Universiti Malaysia Pahang. pp. 181-196., 538. ISBN 978-981-13-3708-6

Hamzah, Ahmad and Nurul Syafiqah, Mohd and Nur Aqilah, Othman and Mohd Mawardi, Saari (2019) Design and development of wearable human activity recognition for heatlhcare monitoring. In: 3rd National Conference on Wind and Earthquake Engineering & International Seminar on Sustainable Construction Engineering, 12-13 July 2019 , Impiana KLCC Hotel, Kuala Lumpur. pp. 1-11.. (Unpublished)

Han, Fengrong and Liu, Xinni and Izzeldin, I. Mohd and Kamarul Hawari, Ghazali and Zhao, Yue (2019) A Survey on Deployment and Coverage Strategies in Three-Dimensional Wireless Sensor Networks. In: ICSCA '19: Proceedings of the 2019 8th International Conference on Software and Computer Applications, 19-22 February 2019 , Penang, Malaysia. pp. 544-549.. ISBN 978-1-4503-6573-4

Hanafi, M. Yusop and M. F., Ghazali and Azmi, W. H. and Mohd Fadhlan, Mohd Yusof and M. A., Pi Remli and M. A. A., Rahim (2019) A Study of Ikaz and Normalized Hilbert transform for solving faulty in pipeline distribution system using transmission line modelling. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012083). ISSN 1757-899X

Hanafi, M. Yusop and M. F., Ghazali and W. H., Azmi and Mohd Fadhlan, Mohd Yusof and M. A., PiRemli and M. Z., Noordin (2019) Application of Ikaz and direct quadrature for solving leakage in pipeline distribution by using transmission line modelling. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-9., 469. ISSN 1757-8981 (Print); 1757-899X (Online)

Haneen, Abd Wahab and Noraziah, Ahmad and Alsewari, Abdulrahman A. and Sinan, Q. Salih (2019) An enhanced version of black hole algorithm via levy flight for optimization and data lustering problems. IEEE Access, 7. pp. 142085-142096. ISSN 2169-3536. (Published)

Hanida, Abdul Aziz and Sukadarin, Ezrin Hani and Abdullah, Syamsul B. and Othman, Mohamad R. and Nur Izzati, Pakhor Anuar and Pang, Kar Kei (2019) Investigation of Management of Change (MOC) requirements for framework intervention compliance with Process Safety Management standard. , [Research Report: Research Report] (Unpublished)

Hanis Athirah, Roslan (2019) Effect of soil type and level of seismicity on seismic design of reinforced concrete school building. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hanis Hazirah, Arifin and Nurfarahin, Zainal and Libriati, Zardasti and Nordin, Yahaya and Lim, Kar Sing and Norhazilan, Md Noor (2019) Mechanical properties of carbon nanotubes-modified epoxy grout for pipeline repair system. Jurnal Teknologi (Sciences & Engineering), 81 (3). pp. 169-177. ISSN 2180–3722. (Published)

Haque, Muhammad Ehteshamul (2019) A CFD model development and performance investigation of frost free refrigerator with nanoparticles suspended in the lubricant. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Hariharan, Ezhilarasu and Raghavendra, Ramalingam and Chetna, Dhand and Lakshminarayanan, Rajamani and Asif, Sadiq and Gandhimathi, Chinnasamy and Seeram, Ramakrishna and Boon, Huat Bay and Venugopal, Jayarama Reddy and Dinesh Kumar, Srinivasan (2019) Biocompatible Aloe vera and Tetracycline Hydrochloride Loaded Hybrid Nanofibrous Scaffolds for Skin Tissue Engineering. International Journal of Molecular Science, 20 (5174). pp. 1-16. (Published)

Harvent Rau, Mogana Ravu (2019) Android based smart security systems using internet of things (IoT) and firebase. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Haryati, Awang and Nor Hayati, A. Hamid and Mohamad Idris, Ali and Noram Irwan, Ramli and Putra Jaya, Ramadhansyah (2019) Influence of chemical properties and mineral contents on sandstone strength. In: 9th Int. Conf. on Geotechnique, Construction Materials and Environment, 20 - 22 November 2019 , Hotel Continental Fuchu in Tokyo, Japan. pp. 1-6.. ISBN 978-4-909106025 (Unpublished)

Haryati, Awang and Noram Irwan, Ramli and M., Khairil Azman and Nor Hayati, Abdul Hamid and H., Mohd Hilmi (2019) Overburden determination for quarry prospecting using seismic refraction: a case study. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-6., 244 (012033). ISSN 1755-1315

Haryati, Awang and Song, Ki Il and Rini Asnida, Abdullah (2019) Effect of void ratio to the strength parameters of sedimentary rocks. Bulletin of the Geological Society of Malaysia, 68. pp. 147-150. ISSN 0126-6187. (Published)

Haryati, Yaacob and Norhidayah, Abdul Hassan and Nordiana, Mashros and Juraidah, A. and Nor Hayati, Abdul Hamid and Putra Jaya, Ramadhansyah and M., Khairil Azman and Haryati, Awang (2019) Stability and rutting resistance of porous asphalt mixture incorporating coconut shells and fibres. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-5., 244 (012043). ISSN 1755-1315

Haryati, Yaacob and Norhisham, Bakhary and Mohd Ismid, Md Said and Azmi, Aris and Sobri, Harlin and Mohammad, Ismail and Norhidayah, Abdul Hassan and Nor Eliza, Alias and Putra Jaya, Ramadhansyah (2019) MOOC - Research Methodology for Engineering. [Intellectual Property (IP)]

Hasan, Ahmad (2019) Perspektif golongan antivaksin bertentangan dengan kaedah fekah dan maqasid syariah. UMP News . (Unpublished)

Hasan, Ali M. and Jalab, Hamid A. and Meziane, Farid and Kahtan, Hasan and Al-Ahmad, Ahmad Salah (2019) Combining deep and handcrafted image features for MRI brain scan classification. IEEE Access, 7. pp. 79959-79967. ISSN 2169-3536. (Published)

Hasan, Md Munirul (2019) A collaborative model for post flood activities exploiting an enhanced expanding neighborhood search algorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md Arafatur, Rahman).

Hasanah, Lilik and Nugroho, Harbi Setyo and Chandra, Wulandari and Budi, Mulyanti and Berhanuddin, Dilla Duryha and Mohamad Hazwan, Haron and Susthitha, Menon P. and Ahmad Rifqi, Md. Zain and Hamidah, Ida and Khairurrijal, Khairurrijal and R., Mamat (2019) Enhanced sensitivity of microring resonator-based sensors using the finite difference time domain method to detect glucose levels for diabetes monitoring. Applied Sciences, 10 (12). pp. 1-12. ISSN 2076-3417. (Published)

Haslizam, Abdullah and Mohd Adnin, Hamidi and Saiful Anwar, Che Ghani (2019) Process improvement of multiple agarwood oil extractions using low-cost multi-channel temperature data logger. In: International Conference On Advances In Mechanical Engineering And Nanotechnology (ICAMEN 2019), 6 - 11 March 2019 , Manipal University Jaipur India. pp. 1-6.. (Unpublished)

Hasmadi, Hassan and Abdul Halim, Taib (2019) Persepsi penjaga terhadap `SAR-KAFA’ dalam usaha membimbing pelajar menguasai kemahiran asas membaca Al-Quran di ‘SAR-KAFA' kariah Masjid Kampung Pandan Satu, Kuantan. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 381-386.. ISBN 978-967-17268-1-5

Hasmadi, Hassan and Abdul Halim, Taib (2019) Tahap keyakinan penjaga terhadap aktiviti pembelajaran dalam membimbing pelajar untuk melahirkan generasi Al-Quran - kajian kes di `SAR-KAFA’ kariah Masjid Pandan Satu, Kuantan. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 425-430.. ISBN 978-967-17268-1-5

Hasmadi, Hassan and Artika Rasul, Sulaiman (2019) Tahap kesediaan guru Pendidikan Islam dalam pentaksiran Dokumen Standard Kurikulum dan Pentaksiran Sekolah Rendah. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 415-424.. ISBN 978-967-17268-1-5

Hasmadi, Hassan and Fatimah, Abdul Rashid (2019) Analisis perbezaan tahap kesediaan guru terhadap 1bestarinet dari aspek jantina, bangsa dan usia. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 35-43.. ISBN 978-967-17268-1-5

Hasmadi, Hassan and Fatimah, Abdul Rashid (2019) Analisis perbezaan tahap kesediaan guru terhadap 1bestarinet dari aspek tahap pendidikan, pengalaman mengajar dan bidang pengajaran. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 44-53.. ISBN 978-967-17268-1-5

Hasmadi, Hassan and Jamal Rizal, Razali (2019) Persepsi staf bukan akademik terhadap penampilan pelajar Universiti Malaysia Pahang. International Journal of Humanities Technology and Civilization (IJHTC), 1 (6). pp. 76-81. ISSN 2289-7216. (Published)

Hasmadi, Hassan and Mohd Azuri, Shaari (2019) Persepsi Kepimpinan Sekolah (KS) Terhadap Sipartners+ Yang Menjalankan Bimbingan Kepada Mereka Di Pantai Timur Malaysia. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 374-380.. ISBN 978-967-17268-1-5

Hasmadi, Hassan and Rozelianti, Abdul Razak (2019) Analisis perbezaan tahap kesediaan e-latihan dalam kalangan pekerja swasta berdasarkan faktor usia, taraf akademik dan pengalaman. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 25-34.. ISBN 978-967-17268-1-5

Hasmadi, Hassan and Rozelianti, Abdul Razak (2019) Kajian kesediaan e-latihan dalam kalangan pekerja swasta di Pahang. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 109-118.. ISBN 978-967-17268-1-5

Hasmadi, Hassan and Sylviano, Abu Bakar (2019) Tahap kesediaan guru-guru Pendidikan Islam terhadap penggunaan teknologi mudah alih dalam pengajaran Pendidikan Islam sekolah rendah. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 408-414.. ISBN 978-967-17268-1-5

Hasmadi, Hassan and Sylviano, Abu Bakar (2019) Tahap pengetahuan guru-guru Pendidikan Islam terhadap penggunaan teknologi mudah alih dalam pengajaran Pendidikan Islam sekolah rendah. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 431-438.. ISBN 978-967-17268-1-5

Hasmadi, Hassan and Zamri, Basumi (2019) Hubungan antara gaya pengajaran guru dengan pencapaian pelajar dalam subjek Bahasa Inggeris di sekolah-sekolah rendah daerah Mersing, Johor. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 76-85.. ISBN 978-967-17268-1-5

Hasmadi, Hassan and Zamri, Basumi (2019) Pengaruh faktor jantina dan opsyen guru-guru Bahasa Inggeris terhadap gaya pengajaran. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 286-294.. ISBN 978-967-17268-1-5

Hasmawani, Hashim and Muhammad Khairul Anuar, Mohamed and Nazila, Ishak and Norhafizah, Md Sarif and Mohd Zuki, Salleh (2019) Thermal radiation effect on MHD stagnation point flow of Williamson fluid over a stretching surface. In: Journal of Physics: Conference Series, 2nd International Conference on Applied and Industrial Mathematics and Statistics (ICoAIMS 2019), 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-13., 1366 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Hasnah, Haron and Abdul Munaim, Mimi Sakinah and Kalpana, Ramachandran and Shahrizai, Sarif (2019) Achieving academic excellence through increasing productivity and decreasing cost. , [Research Report: Research Report] (Unpublished)

Hasnah, Haron and Ishak, Ismail and Daing Nasir, Ibrahim and Yuserrie, Zainuddin and Mohd Ridzuan, Darun and Suhaidah, Hussain and Aziman, Abdullah and Fernando, Yudi and Akhtar, Satar and Raziman, Abdullah Hashim (2019) FGIC Corruption Barometer. Penerbit UMP, Kuantan, Pahang. ISBN 978-967-2226-44-4

Hasnah, Haron and Ishak, Ismail and Ibrahim, Daing Nasir and Darun, Mohd Ridzuan and Mahmud, Fatimah (2019) Relationship of independence of internal audit and internal audit capability (IACM) in the Malaysian public sector organizations. , [Research Report: Research Report] (Unpublished)

Hasnah, Haron and Nur Nadiah Salihah, Mat Razali and Fazeeda, Mohamad (2019) Factors influencing financial planning retirement amongst employees in the private sector in East Coast Malaysia: literature review and research agenda. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1115-1129., 2019. ISSN 2518-668X

Hasnah, Hussiin (2019) Pengangguran- benarkah mahasiswa memilih kerja. UMP News . (Unpublished)

Hasneeza, L. Zakaria and Kamal Z., Zamli and Fakhrud, Din (2019) Hybrid Migrating Birds Optimization Strategy for t-way Test Suite Generation. In: 3rd International Conference on Computational Science and Information Management (ICoCSIM 2019), 21-24 March 2019 , Lombok, Indonesia. pp. 1-6.. (Unpublished)

Hassan, Ahmad (2019) Dental clinic management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hassan, Ahmed Khalif and Adeleke, A. Q. and Taofeeq, D. M. (2019) The Effects of Project Triple Constraint on Malaysia Building Projects. Social Science and Humanities Journal, 3 (5). pp. 1222-1238. ISSN 2456-2653. (Published)

Hassan, Mohd Hasnun Arif (2019) Design of protective headgear for soccer players through experimental and computational analysis. , [Research Report: Research Report] (Unpublished)

Hassan Alajmi, Qasim Abdullah (2019) Adoption model for cloud-based E-learning in Omani higher education institutions. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Adzhar, Kamaludin).

Hassanal, Haris (2019) Fabrication & characterization of biomaterials from hydroxylethyl cellulose sponges coated with hydroxy apatite. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hasyuzariza, M. Tobib and A. Aziz, Hairuddin and Nuraini, A. A. and M. M., Noor and J., Zulkiple and Mossa, Muntasser A. A. (2019) An Experimental Investigation On The Combustion And Performance Of An HCCI-DI Engine. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018, 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8., 2059 (020010). ISBN 978-0-7354-1787-8

Hasyuzariza, M. Tobib and Rostam, Hamzah and A. A. Mossa, Muntasser and A. Aziz, Hairuddin and M. M., Noor (2019) The performance of an HCCI-DI engine fuelled with palm oil- based biodiesel. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012079). ISSN 1757-899X

Hayrol Azril, Mohamed Shaffril and Asnarulkhadi, Abu Samah and Samsul Farid, Samsuddin and Zuraina, Ali (2019) Mirror-mirror on the wall, what climate change adaptation strategies are practiced by the Asian's fishermen of all? Journal of Cleaner Production, 232. pp. 104-117. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Wan Norharyati, Wan Salleh (2019) A significant review on utilization of hybrid nanofluid in heat exchangers: Theoretical and experimental. In: 4th International Manufacturing Engineering Conference (IMEC 2019), 21-22 August 2019 , The Everly Hotel, Putrajaya, Malaysia. pp. 1-6.. (Unpublished)

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Ahmad Syahiman, Mohd Shah and Mohamad Shaiful, Abdul Karim (2019) A Review on Factors Affecting Heat Transfer Efficiency of Nanofluids for Application in Plate Heat Exchanger. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (1). pp. 144-154. ISSN 2289-7879. (Published)

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Mohd Syafiq, Sharip and Ahmad Shahir, Jamaludin and Wan Norharyati, Wan Salleh and Farhana, Aziz (2019) A brief review on utilization of hybrid nanofluid in heat exchangers: Theoretical and experimental. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems, 21-22 August 2019 , Putrajaya, Malaysia. pp. 416-422.. ISBN 978-981-15-0950-6

Hazirah A., Razak and Nornasuha, Abdullah and J., Gasang and Herma Dina, Setiabudi and Chin, S. Y. and Nurul Aini, Razali (2019) Conversion of carbon dioxide and methane to syngas over Ni/SiO2 catalyst prepared from waste palm oil fuel ash. In: IOP Conference Series: Earth and Environmental Science, The 12th International Civil Engineering Post Graduate Conference (SEPKA), The 3rd International Symposium on Expertise of Engineering Design (ISEED), 27-28 August 2018 , Johor, Malaysia. pp. 1-9., 220 (012058). ISSN 1755-1315

Hazirah A., Razak and Nornasuha, Abdullah and Setiabudi, H. D. and Chin, S. Y. and Nurul Aini, Razali (2019) Influenced of Ni loading on SBA-15 synthesized from oil Palm ash silica for syngas production. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-10., 702 (012024). ISSN 1757-899X

Hazirah A., Razak and Nornasuha, Abdullah and Setiabudi, H. D. and Chin, S. Y. and Nurul Aini, Razali (2019) Refluxed Synthesis of SBA-15 Using Sodium Silicate Extracted from Oil Palm Ash for Dry Reforming of Methane. Materials Today: Proceedings, 19 (4). pp. 1363-1372. ISSN 2214-7853. (Published)

Hazlina, Faizal (2019) Perpustakaan mini di Pusat Sehenti Komuniti KP House pupuk budaya minat membaca. UMP News . (Unpublished)

Hazlina, Faizal (2019) UMP ranked 134th in Asia. UMP News . (Unpublished)

Hazlina, Faizal (2019) UMP tersenarai pada kedudukan 134 terbaik Asia. UMP News . (Unpublished)

Hazman, Abu Hassan and R., Mamat and Ftwi Y., Hagos and Najafi, Gholamhassan (2019) Experimental of oxygenated fuel on diesel engine: fuel properties, performance and emission. International Journal of Integrated Engineering, 1. pp. 1-16. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Hazman, Abu Hassan and R., Mamat and Hagos, F. Y. (2019) Reductions of Particulate Matter Emissions of a Diesel Engine Fueled with Oxygenated and Emulsion Fuels. Journal of Biobased Materials and Bioenergy, 13 (6). pp. 764-777. ISSN 1556-6560. (Published)

Hazman, Abu Hassan and R., Mamat and Hagos, F. Y. and Gholamhassan, Najafi (2019) Experiment of oxygenated fuel on diesel engine: Properties, performance and emission. In: International Symposium on Science, Technology and Engineering (ISSTE 2019), 18-20 October 2019 , Melaka, Malaysia. pp. 1-14.. (Unpublished)

Hazrulrizawati, Hamid and Roziasyahira, Mutazah (2019) Synthesis of silver nanoparticles by clinacanthus nutans extract supported with identification of flavonoids by UPLC-QTOF/MS and its antimicrobial activity. Iranian Journal of Science and Technology, Transaction A: Science, 43 (5). pp. 2219-2225. ISSN 1028-6276. (Published)

Hazrulzurina, Suhaimi (2019) Analysis of combustion characteristics, engine performances and exhaust emissions of long-chain alcohol-diesel fuel blends. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).

Hazrulzurina, Suhaimi and Abdullah, Adam and Mrwan, Anes G. and Zuhaira, Abdullah and Mohd. Fahmi, Othman and Mohd. Kamal, Kamarulzaman and Hagos, F. Y. (2019) A comparative analysis on emissions of some next generation long-chain alcohol/diesel blends in a direct-injection diesel engine. In: AIP Conference Proceedings: 3rd International Conference On Automotive Innovation Green Energy Vehicle (AIGEV2018), 25-26 July 2018 , Kuantan, Malaysia. pp. 1-13., 2059 (020053). ISBN 978-0-7354-1787-8

Hazwani Hawa, Mohammad Sobani (2019) Treatment of palm oil mill effluent using struvite preciptation method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Heidarinik, Somaye (2019) Flow enhancement using plant based polymer additives in brain-vessels-like microchannels. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Helmi, Mohamed Isa (2019) Siswazah UMP berbakti hulur sumbangan buat anak yatim. UMP News . (Unpublished)

Helmi, Mohamed Isa (2019) UMP’s IPS and Postgraduate Association brought cheers to orphans at Hembusan Kasih Sayang Care Centre. UMP News . (Unpublished)

Heng, Sheng Guang and Rosdiyana, Samad and Mahfuzah, Mustafa and Nor Rul Hasma, Abdullah and Pebrianti, Dwi (2019) Analysis of performance between kinect v1 and kinect v2 for various facial part movements. In: 9th IEEE International Conference on System Engineering and Technology, ICSET 2019, 7 October 2019 , Shah Alam, Malaysia. pp. 17-22. (8906419). ISSN 2470-640X ISBN 9781728107585

Heng, Sheng Guang and Rosdiyana, Samad and Mahfuzah, Mustafa and Nor Rul Hasma, Abdullah and Pebrianti, Dwi (2019) Analysis of performance between kinetic v1 and Kinect v2 for various facial part movements. In: 2019 IEEE 9th International Conference on System Engineering and Technology, ICSET 2019 - Proceeding, 7 October 2019 , Shah Alam. pp. 17-22. (8906419). ISBN 978-172810758-5

Herma Dina, Setiabudi and C., C. Chong and S. N., Bukhari and A. A., Jalil (2019) Robust ni-based dendritic rod-like F-SBA-15 and spherical DFSBA-15 for methane dry reforming. In: The 8th Asia Pacific Congress on Catalysis, 4 Ogos 2019 , Centara Grand & Bangkok Convention Centre, Bangkok, Thailand. pp. 1-42.. (Unpublished)

Herzallah, Fadi A. T. and Al-Sharafi, Mohammed A. and Alajmi, Qasim and Muriati, Mukhtar and Ruzaini, Abdullah Arshah and Eleyan, Dirar (2019) Conceptualizing a model for the effect of information culture on electronic commerce adoption. In: Recent Trends in Data Science and Soft Computing: IRICT 2018. Advances in Intelligent Systems and Computing, 843 . Springer, Cham, pp. 861-870. ISBN 978-3-319-99007-1

Herzwan, H. M. and Azri, Alias and R., Mamat (2019) Turbocharging small size engine to increase engine output: an assessment of turbocharger study field. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012089). ISSN 1757-8981

Hiew, Kuet Shang (2019) An IoT based baby monitoring system. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Hii, Kiew Hui and Narayanamurthy, Vigneswaran and Fahmi, Samsuri (2019) ECG noise reduction technique using Antlion Optimizer (ALO) for heart rate monitoring devices. Engineering Technology & Applied Science Research, 9 (4). pp. 4525-4529. ISSN 1792-8036. (Published)

Hikmadiyar, R. A. and Sutikno, Juwari P. and Handogo, R. and Azizah, Z. and Anwaruddin, Hisyam (2019) Process dynamic and control for nonconventional column/rectifier configuration with aspen hysys v10.0. In: IOP Conference Series: Materials Science and Engineering, 1st International Symposium of Indonesian Chemical Engineering (ISIChem 2018), 4-6 October 2018 , West Sumatra, Indonesia. pp. 1-7., 543 (012049). ISSN 1757-8981 (Print), 1757-899X (Online)

Hilles, A. R. and Mahmood, Syed and Mohd Arifin, Kaderi and Ridzwan, Hashim (2019) Evaluation of the antimicrobial properties of eel skin mucus from monopterus albus against selected oral pathogens and identification of the anti-oral bioactive compounds using LC-QTOF-MS. Journal of Microbiology Biotechnology and Food Sciences, 9 (1). pp. 140-143. ISSN 1338-5178. (Published)

Hilles, A. R. and Mahmood, Syed and Mohd Arifin, Kaderi and Ridzwan, Hashim (2019) Identification of the bioactive compounds of skin mucus from Asian swamp eel (monopterus albus) using liquid chromatography quadrupole-time-of-flight mass spectrometry. Malaysian Journal Of Biochemistry & Molecular Biology, 22 (3). pp. 43-47. ISSN 2600-9005. (Published)

Hilmi Wawardi, Haris (2019) Study on clinical waste management at healthcare centres in Kuantan, Pahang. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Hisaji, Noda and Mohd Rashid, Muhammad Ikram and Abdullah, R. and Razali, Saifudin (2019) USB LED lighting tube. , [Research Report: Research Report] (Unpublished)

Ho, Kit Sheng (2019) Finite element analysis of slab bridge with beam element using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hong, Chi Shein and Chin, S. Y. and Cheng, C. K. and Chua, Gek Kee (2019) Selective oxidation of glycerol to mesoxalic acid by laccase/2,2,6,6-tetramethylpiperidine-N-oxyl system : effect of process conditions and the kinetic modeling. Chemical Engineering Communications, 206 (12). pp. 1645-1660. ISSN 0098-6445 (print); 1563-5201 (online). (Published)

Hong, Pui Khoon and Sharmila, Sevan and Nur Liyana, Mohd Izan (2019) functional edible coatings for dried guava (psidium guajava L.) slices. In: 2nd International Conference on Recent Advancements in Science and Technology (ICORAST 2019), 27-30 October 2019 , Putrajaya, Malaysia. pp. 1-9.. (Unpublished)

Hoseini, S. S. and G., Najafi and Ghobadian, B. and R., Mamat and Ebadi, M. T. and Yusaf, Talal (2019) Characterization of biodiesel production (ultrasonic-assisted) from evening-primroses (Oenothera lamarckiana) as novel feedstock and its effect on CI engine parameters. Renewable Energy, 130. pp. 50-60. ISSN 0960-1481. (Published)

Hossain, Md Shamim and Jalab, Hamid A. and Kahtan, Hasan and Azma, Abdullah (2019) Image resolution enhancement using improved edge directed interpolation algorithm. In: Proceedings - 9th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2019, 29 November-1 December 2019 , Penang. pp. 55-60. (9068535). ISSN 978-172813500-7

Hossain, Md. Sabir and Tanim, Ahsan Sadee and Choudhury, Sadman Sakib and Hayat, S. M. Afif Ibne and M. Nomani, Kabir and Islam, Mohammad Mainul (2019) An Efficient Solution to Travelling Salesman Problem using Genetic Algorithm with Modified Crossover Operator. EMITTER International Journal of Engineering Technology, 7 (2). pp. 480-493. ISSN 2355-391X. (Published)

Hossain, Mohammed Anwar (2019) Syngas production from methane dry reforming over CeO2 promoted Ni/CaFe2O4 catalyst. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hossain, Mohammed Anwar and Ayodele, Bamidele V. and Cheng, C. K. and Khan, Maksudur R. (2019) Optimization of renewable hydrogen-rich syngas production from catalytic reforming of greenhouse gases (CH4 and CO2) over calcium iron oxide supported nickel catalyst. Journal of the Energy Institute, 92 (1). pp. 177-194. ISSN 1743-9671. (Published)

Hossain, S. K. Safdar and Saleem, Junaid and Rahman, SleemUr and Zaidi, Syed Mohammed Javaid and McKay, Gordon and Cheng, C. K. (2019) Synthesis and Evaluation of Copper-Supported Titanium Oxide Nanotubes as Electrocatalyst for the Electrochemical Reduction of Carbon Oxide to Organics. Catalysts, 9 (3). pp. 1-19. ISSN 2073-4344. (Published)

Hossain, Toufiq Md and Jamlos, M. F. and Mohd Aminudin, Jamlos and Soh, Ping Jack and Siti Zuraidah, Ibrahim and Muammar, Mohamad Isa and Schreurs, Dominique M. M.-P. and Narbudowicz, Adam and Mohd Fairusham, Ghazali (2019) Compact broadband triple-ring five-port reflectometer for microwave brain imaging applications. IEEE Access, 7. pp. 29597-29609. ISSN 2169-3536. (Published)

Hsieh, Chin-Hsien and Irene, Wei Kiong Ting and Asif, Jawad and Le, Hanh Thi My (2019) The role of controlling shareholders in determining investments of intellectual capital among Taiwanese semiconductor companies. Journal Of Intellectual Capital, 21 (1). pp. 62-86. ISSN 1469-1930. (Published)

Hujainah, Fadhl and Rohani, Abu Bakar and Abdulgabber, Abdullateef (2019) Investigation of requirements interdependencies in existing techniques of requirements prioritization. Tehnicki Vjesnik, 26 (4). pp. 1186-1190. ISSN 1330-3651. (Published)

Hujainah, Fadhl and Rohani, Abu Bakar and Abdulgabber, Mansoor Abdullateef (2019) StakeQP: a semi-automated stakeholder quantification and prioritisation technique for requirement selection in software system projects. Decision Support Systems, 121. pp. 94-108. ISSN 0167-9236. (Published)

Hujainah, Fadhl Mohammed Omar (2019) A semi-automated requirements prioritisation technique for scalable requirements with stakeholder quantification and prioritisation. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Bakar, Rohani).

Humaira’, Abdul Latif (2019) Modelling awareness of diabetes mellitus : case study at two public health centres. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rashid, Ab Hamid).

Husain, M B S and Gupta, Arun and Alashwal, B Y (2019) Development of keratin based hydrogels for biomedical applications. IOP Conference Series: Materials Science and Engineering, 702. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Husin, Syed Muhamad Ubaidillah (2019) Teacher recruitment, selection and promotion: The role of teachers’ unions in Malaysia. Journal of Techno Social (JTS), 11 (2). pp. 24-32. ISSN 2229-8940. (Published)

Hussanan, Abid and Mohd Zuki, Salleh and Khan, Ilyas and Chen, Zhi-Min (2019) Unsteady water functionalized oxide and non-oxide nanofluids flow over an infinite accelerated plate. Chinese Journal of Physics, 62. pp. 115-131. ISSN 0577-9073. (Published)

Hussein, Ahmed Abdulameer and Putra Jaya, Ramadhansyah and Haryati, Yaacob and Norhidayah, Abdul Hassan and Aletba, Salam Ridha Oleiwi and Huseien, Ghasan Fahim and Ekarizan, Shaffie and Mohd Rosli, Mohd Hasan (2019) Physical, chemical and morphology characterisation of nano ceramic powder as bitumen modification. International Journal of Pavement Engineering. pp. 1-14. ISSN 1477-268X. (In Press / Online First) (In Press / Online First)

I

I., Naiman and K., Kadirgama and D., Ramasamy (2019) Experimental and one dimensional investigation on nanocellulose and aluminium oxide hybrid nanofluid as a new coolant for radiator. In: 1st International Postgraduate Conference On Mechanical Engineering (IPCME 2018), 31 Oktober 2018 , Library UMP Pekan. pp. 1-8., 469 (1). ISSN 1757-8981

I. I., Azmi and S. N. A. M., Zaini and Mohd Yazid, Abu (2019) Application of Mahalanobis-Taguchi system in palm oil plantation. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 1-8. ISSN 2636-9575. (Published)

I. M., Sollehudin and Mohamad Heerwan, Peeie (2019) The investigation on dynamic behavior of electric powered wheelchair during the obstacle avoidance. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

I. M., Zulhilmi and Mohamad Heerwan, Peeie and R. I. M., Eiman and Muhammad Izhar, Ishak and S. M., Asyraf (2019) Investigation on vehicle dynamic behaviour during emergency braking at different speed. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6161-6172. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ibrahim, Thamir K. and Mohammed, Mohammed Kamil and Al Doori, Wadhah Hussein Abdulrazzaq and Al-Sammarraie, Ahmed Tawfeeq and F., Basrawi (2019) Study of The Performance of The Gas Turbine Power Plants From The Simple To Complex Cycle: A Technical Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (2). pp. 228-250. ISSN 2289-7879. (Published)

Idris, M. A. M and Hao, Mok Ren and Mohd Ashraf, Ahmad (2019) A data driven approach to wind plant control using moth-flame optimization (MFO) algorithm. International Journal on Advanced Science, Engineering and Information Technology, 9 (1). pp. 18-23. ISSN 2088-5334. (Published)

Ihsan Naiman, Ibrahim and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and D., Ramasamy and S. M., Soffie and Mohd Hafiz Dzarfan, Othman (2019) A review on vehicle radiator using various coolants. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (2). pp. 330-337. ISSN 2289-7879. (Published)

Ihsan Naiman, Ibrahim and Norazlianie, Sazali and D., Ramasamy and Ahmad Shahir, Jamaludin and Mohd Syafiq, Sharip and Haziqatulhanis, Ibrahim (2019) Effect of impregnate nanocellulose with ethylene glycol for car radiator application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). pp. 43-50. ISSN 2289-7879. (Published)

Ikhwan Muhammad, Hillmee (2019) Source code optimizer using local optimization approach for java based generic code clone detection. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ikmal Izzat, Abdullah Karim (2019) Evaluation on design-build procurement process in construction industry in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Imran, Ali and Quazi, M. M. and Zalnezhad, E. and Sarhan, Ahmed A. D. and N. Liana, Sukiman and M., Ishak (2019) Hard anodizing of aerospace AA7075-T6 aluminum alloy for improving surface properties. Transactions of the Indian Institute of Metals, 72 (10). pp. 2773-2781. ISSN 0972-2815. (Published)

Imran Edzereiq, Kamarudin and M. A., Ameedeen and Z. R. M., Azmi and M. I. U., Ong and Abbas Saliimi, Lokman (2019) Performance analysis on round trip available bandwidth estimation tools for wireless mesh network. In: 6th International Conference on Software Engineering & Computer Systems (ICSECS 2019), 25-27 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8..

Intan Bazliah, Mohd and Abdullah, Ibrahim (2019) Simulation analysis for assembly line workstation layout: case study. International Journal of Human and Technology Interaction, 3 (1). pp. 47-54. ISSN 2590-3551. (Published)

Intan Najiha Akhmar, Saharuddin and Doh, Shu Ing (2019) Factors Influencing Road Damage in Developing Countries. International Journal of Engineering Research and Management (IJERM), 6 (2). pp. 1-4. ISSN 2349-2058. (Published)

Intan Shafinaz, Abd Manaf and Mohd Hasbi, Ab. Rahim and Maniam, Gaanty Pragas (2019) Biodiesel production from catfish (Pangasius) fat via ultrasound- assisted method. Maejo International Journal of Energy and Environmental Communication, 1 (1). pp. 15-20. ISSN 2673-0537. (Published)

Intan Shafinaz, Abd Manaf and Nurul Hajar, Embong and Siti Norhafiza, Mohd Khazaai and Mohd Hasbi, Ab. Rahim and M. M., Yusoff and Lee, Keat Teong and Gaanty Pragas, Maniam (2019) A review for key challenges of the development of biodiesel industry. Energy Conversion and Management, 185. pp. 508-517. ISSN 0196-8904. (Published)

Intan Suhana, Mohd Razelan and Azlina, Ismail and Azman, N. F. T. (2019) Impact of minerals freight and logistic operations towards Kuantan traffic flow. In: 3rd National Conference on Wind and Earthquake Engineering & International Seminar on Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8.. (Unpublished)

Intan Suhana, Mohd Razelan and Azlina, Ismail and Zahrizan, Zakaria (2019) Proactive safety measure using road environment assessment program (REAP). International Journal of Integrated Engineering, 11 (2). pp. 269-279. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Iqbal, AKM Asif and Arai, Yoshio (2019) Micromechanical investigation of the fatigue crack propagation and damage development in Al/Al2O3/SiC hybrid metal matrix composite. Russian Journal of Non-Ferrous Metals, 60 (5). pp. 566-574. ISSN 1067-8212. (Published)

Iqhlima Najwa, I. N. and Haryati, Awang and Putra Jaya, Ramadhansyah and Mohamad Idris, Ali (2019) A comparative study of Kuantan bauxite mineralogy as potential material in civil engineering. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-7., 244 (012002). ISSN 1755-1315

Irene, Wei Kiong Ting (2019) Employability rate of UMP graduates above 90% in past five years. QS WOWNEWS . (Unpublished)

Irene, Wei Kiong Ting (2019) Flashback - Universiti Malaysia Pahang in the past, present and future. QS WOWNEWS .

Irene, Wei Kiong Ting (2019) Huluran Kasih of back-to-school sets by Sime Darby and Universiti Malaysia Pahang. QS WOW NEWS .

Irene, Wei Kiong Ting (2019) One of the top technological universities in Malaysia. QS WowNews . (Unpublished)

Irene, Wei Kiong Ting (2019) QS ranks Universiti Malaysia Pahang among world’s best. QS WOWNEWS . (Unpublished)

Irene, Wei Kiong Ting (2019) Universiti Malaysia Pahang Inks MoU for Knowledge Sharing and Technology Transfer of Engineering and Technology. QS WOW NEWS . (Unpublished)

Irene, Wei Kiong Ting (2019) Universiti Malaysia Pahang academics receive awards and prizes. QS WOWNEWS . (Unpublished)

Irnie Azlin, Zakaria and Wan Ahmad Najmi, Wan Mohamed and Zailan, M. B. and Azmi, W. H. (2019) Experimental analysis of SiO2-distilled water nanofluids in a polymer electrolyte membrane fuel cell parallel channel cooling plate. International Journal of Hydrogen Energy, 44 (47). pp. 25850-25862. ISSN 0360-3199. (Published)

Ishak, Ismail and Hasnah, Haron and Shamsudin, Norazidah (2019) The quality of chief integrity officer and ethical climate on the level of ethics and integrity. , [Research Report: Research Report] (Unpublished)

Ishmael, Ukaegbu Chinonso (2019) Study on antiproliferative activity of hypsizygus tessellatus and flammulina velutipes extracts adsorbed on sulphated zirconia nanoparticles against breast cancer cell lines. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ishtiaq, Muhammad (2019) Book Review Creswell, J. W. (2014). Research Design: Qualitative, Quantitative and Mixed Methods Approaches (4th ed.). Thousand Oaks, CA: Sage. English Language Teaching, 12 (5). pp. 40-41. ISSN 1916-4742 (Print); 1916-4750 (Online). (Published)

Islam, A. S. M. Touhidul and Shariman, Mustafa and Sorooshian, Shahryar (2019) An error-proof approach for decision making using DEMATEL. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 244-258.. ISSN 2518-668X

Islam, M. Amirul and Baranitharan, E. and Cheng, C. K. and Dubey, Bipro Nath and Khan, Maksudur R. (2019) Biofilm re-vitalization using hydrodynamic shear stress for stable power generation in microbial fuel cell. Journal of Electroanalytical Chemistry, 44. pp. 14-22. ISSN 1572-6657. (Published)

Islam, Md Kamrul (2019) An online density-based clustering algorithm for data stream based on local optimal radius and cluster pruning. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zamli, Kamal Zuhairi).

Islam, Md. Kamrul and Ahmed, Md. Manjur and Kamal Z., Zamli (2019) A buffer-based online clustering for evolving data stream. Information Sciences, 489. pp. 113-135. ISSN 0020-0255. (Published)

Islam, Mir Sujaul and M. G., Salah and Mohamad Idris, Ali and Noram Irwan, Ramli and H. T., Cheng (2019) Evaluate the ecological risk indexes soil heavy metals pollution in industrial estate. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-6., 244 (012016). ISSN 1755-1315

Ismail, N. A. and Hisyam, A. and Shariff, S. (2019) Separation of Sm-Eu-Gd mixed solutions using bifunctional ionic liquid [A336][P204]. AIP Conference Proceedings. 020053-1. (Published)

Ismail, N. A. and Mohd Yunus, M. Y. and Abd Aziz, Mohd Aizudin (2019) Comparison of optimal solvent extraction stages between P204 and [A336][P204] for the separation of europium and gadolinium. IOP Conference Series: Materials Science and Engineering, 702 (1). pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Ismayuzri, Ishak and Larochelle, Pierre (2019) MotoMaker: A robot FDM platform for multi-plane and 3D lattice structure printing. Mechanics Based Design of Structures and Machines, 47 (6). pp. 703-720. ISSN 1539-7734. (Published)

Ismed, Iskandar and Muchamad, Oktaviandri and R., Wangsaputra and Zamzuri, Hamedon (2019) Competing risk models in reliability systems, an Exponential distribution model with Gamma prior distribution, a Bayesian analysis approach. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems, 21-22 August 2019 , Putrajaya, Malaysia. pp. 335-341.. ISBN 978-981-15-0950-6

Israr, Hira and Rasool, Nasir and Rizwan, Komal and Hashmi, Muhammad Ali and Mahmood, Tariq and Rashid, Umer and Mohd Zobir, Hussein and Akhtar, Muhammad Nadeem (2019) Synthesis and reactivities of triphenyl acetamide analogs for potential nonlinear optical material uses. Symmetry, 11 (5). pp. 1-11. ISSN 2073-8994. (Published)

Iswan Akim, Ismail (2019) Pustakawan UMP curah ilmu dalam Bengkel Katalog Sekolah. UMP News . (Unpublished)

Iswan Akim, Ismail (2019) UMP Librarians conduct Information Cataloguing Workshop in Pekan. UMP News . (Unpublished)

Izyana Jannati, Sabri (2019) Study on factors that lead to the abandoned building project in Borneo (Sabah & Sarawak). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Izzah, A. R. N. and Salwani, Mohd Salleh and Tan, S. W. and Mas Ayu, Hassan and R., Daud (2019) Effect of specimen geometry, quenching and trigger mechanism on crushing performance of single hat column. In: 1st IOP Conference Series: International Postgraduate Conference on Mechanical Engineering 2018, 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012091). ISSN 1757-899X

Izzati, Ahmad Rudaini (2019) PVDF-alumina and PVDF-bentonite hollow fiber membrane for CO2 absorption via membrane contactor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

J

J., Izwan and I., Md Sayuti and Noram Irwan, Ramli (2019) The knowledge competency of civil engineers in construction industry. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-5., 244 (012047). ISSN 1755-1315

J., Izwan and I., Md Sayuti and Noram Irwan, Ramli and O. M., Md Azree and F. S., Syahrul (2019) Mechanical performance of carbon fiber reinforced polymer as repair material for damage wall structure. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-6., 244 (012026). ISSN 1755-1315

J., Sukaimi and W. N. H., Wan Abdullah and Muhammad Arif Fahmi, Supian and Saidatul Shima, Jamari and Nurul Aini, Mohd Azman and S., Mohamad and Mohd Faizal, Ali (2019) Properties of microcrystalline cellulose prepared from oil palm empty fruit bunch at different sulfuric acid concentration and hydrolysis temperature. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (012035). ISSN 1757-899X

J., T. Heng and Abdulbari, Hayder A. (2019) Study on capacitive deionization microfluidic desalination. In: Energy Security and Chemical Engineering Congress (ESCHE2019), 17-19 Julai 2019 , Parkroyal Resort Penang, Malaysia. pp. 1-7.. (Unpublished)

J. M., Zikri and M. S. M., Sani and Ahmad Fitri, Yusop and I., Izzudin and Syazwana, Sapee (2019) Vibration analysis on palm oil methyl ester with the additional of butanol. In: 1st International Colloquium On Noise, Vibration And Comfort (CNVC 2019), 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-9., 1262 (1). ISSN 1742-6588

J. M., Zikri and M. S. M., Sani and Erdiwansyah, . and Ahmad Fitri, Yusop and I., Izzudin and Syazwana, Sapee (2019) Vibration analysis on palm oil methyl ester biodiesel as a fuel with the additional of butanol. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 2-11., 1262 (012012). ISSN 1742-6588 (print); 1742-6596 (online)

Jaafar, Jamiluddin and Siregar, Januar Parlaungan and Salleh, M. S. and Mohd Hazim, Mohd Hamdan and Tezara, Cionita and Teuku, Rihayat (2019) Important considerations in manufacturing of natural fiber composites: a review. International Journal of Precision Engineering and Manufacturing-Green Technology, 6 (3). pp. 647-664. ISSN 2288-6206. (Published)

Jabbar, Waheb A. and Hiew, Kuet Shang and Saidatul N. I. S., Hamid and Almohammedi, Akram A. and Roshahliza, M. Ramli (2019) IoT-BBMS: Internet of Things-Based Baby Monitoring System for Smart Cradle. IEEE Access, 7. pp. 93791-9380. ISSN 2169-3536. (Published)

Jabbar, Waheb A. and Muhamad Aznawi, Yuzaidi and Kong, Qi Yan and Ummu Sakinah, Mohd Bustaman and Hashim, Yasir and AlAriqi, Hani Taha (2019) Smart and Green Street Lighting System based on arduino and RF wireless module. In: IEEE 8th International Conference On Modeling Simulation And Applied Optimization (ICMSAO 2019), 15-17 April 2019 , University of Bahrain, Bahrain. pp. 1-6.. ISBN 978-1-5386-7684-4

Jabbar, Waheb A. and Tee, Kok Kian and Roshahliza, M. Ramli and Siti Nabila, Zubir and Nurthaqifah, S. M. Zamrizaman and Balfaqih, Mohammed and Shepelev, Vladimir and Alharbi, Soltan (2019) Design and Fabrication of Smart Home With Internet of Things Enabled Automation System. IEEE Access, 7. pp. 144059-144074. ISSN 2169-3536. (Published)

Jalal, Hanaysha and Haim, Hilman and Zahari, Abu Bakar and Lee, Khai Loon (2019) Determinants of Customers' Perceived Value in the Fast Food Industry for Global Brands in Malaysia. In: Dynamic Perspectives on Globalization and Sustainable Business in Asia. IGI Global, p. 225. ISBN 9781522570950

Jaliliantabar, Farzad and Ghobadian, B. and Najafi, G. and R., Mamat and Carlucci, Antonio Paolo (2019) Multi-objective NSGA-II optimization of a compression ignition engine parameters using biodiesel fuel and exhaust gas recirculation. Energy, 187. pp. 1-2. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Jaliliantabar, Farzad and Ghobadian, Barat and Carlucci, Antonio Paolo and Najafi, Gholamhassan and Rizalman, Mamat and Ficarella, Antonio and Strafella, Luciano and Santino, Angelo and De Domenico, Stefania (2019) A comprehensive study on the effect of pilot injection, EGR rate, IMEP and biodiesel characteristics on a CRDI diesel engine. Energy, 194 (116860). pp. 1-13. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Jamaludin, Abdul Kamil and Mat Akhir, Noor Shakirah (2019) The relationship between the concept of Akinnah Al-Qalb with human capital development. In: The European Proceedings of Social & Behavioural Sciences EpSBS; The 2nd International Conference on Humanities (INCoH 2017), 16 – 17 August 2017 , Parkroyal Penang Resort, Pulau Pinang. pp. 493-502. (55). ISSN 2357-1330 ISBN 978-1-80296-067-9

Jamaludin, Ahmad Shahir and Razak, N. H. and Ibrahim, Ahmad Najmuddin and Osman Zahid, Muhammed Nafis and Rosli, Nurrina and Yusoff, A. R. and Amiril, S. A.S. and Razali, Mohd Nizar Mhd (2019) Performance study of organic based minimum quantity lubrication on machining difficult-to-cut material. , [Research Report: Research Report] (Unpublished)

James Lau, Tze Chen and A. N., Oumer and Azizuddin, Abd Aziz and M. A., At-Tasneem (2019) Preparation and characterisation of mango bark and mango leaf nanoparticles for lubrication. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

Jamil, Roslan (2019) Hybrid solar still with addition of charcoal and oil palm fiber ash for seawater desalination. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Jamiluddin, Jaafar (2019) Characterization of short pineapple leaf fiber reinforced tapioca biopolymer composites. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siregar, Januar Parlaungan).

Jamiluddin, Jaafar and Siregar, J. P. and Tezara, C. and Mohammad Hazim, Mohamad Hamdan and Teuku, Rihayat (2019) A review of important considerations in the compression molding process of short natural fiber composites. The International Journal of Advanced Manufacturing Technology, 105 (7-8). pp. 3437-3450. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Jamrunroj, Panupong and Wongsakulphasatch, Suwimol and Maneedaeng, Atthaphon and Cheng, C. K. and Assabumrungrat, Suttichai (2019) Surfactant assisted CaO-based sorbent synthesis and their application to high-temperature CO2 capture. Powder Technology, 344. pp. 208-221. ISSN 0032-5910. (Published)

Janani, V. and Puviarasi, R. and Ramalingam, Mritha and Boselin Prabhu, S. R. (2019) Research and design voice control camera using raspberry PI. International Journal of Innovative Technology and Exploring Engineering, 8 (9S2). pp. 361-363. ISSN 2278-3075. (Published)

Jasniah, Jamil (2019) E-management for drugstore pharmacy. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Jasri, Mohamad and Mohd Zaidi, Sidek (2019) Springback prediction using finite element simulation incorporated with hardening data acquired from cyclic loading tool. International Journal of Materials Forming and Machining Processes (IJMFMP), 6 (1). pp. 19-39. ISSN 2334-4571. (Published)

Jaya Vejayan, Palliah and Norliana, Munir and Yee, Lee Lian and Rupbansraaj, Bathmanathan and Halijah, Ibrahim and Srikumar, Chakravarthi (2019) Tropical fruits of mango and noni having dual effects of coagulating milk and enriching the curds with micro-constituents of medicinal potential. Malaysian Journal of Science, 38 (3). pp. 34-47. ISSN 2600-8688. (Published)

Jayshree, Thuraisingam (2019) Synthesis and characterization of bio-adhesive using natural rubber latex and bio-based fillers for medium density fibreboard manufacturing. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Jayshree, Thuraisingam and Mishra, Puranjan and Gupta, Arun and Soubam, Triveni and Mohd Bijarimi, Mat Piah (2019) Novel natural rubber latex/lignin-based bio-adhesive: synthesis and its application on medium density fiber-board. Iranian Polymer Journal volume, 28. pp. 283-290. ISSN 1735-5265. (Published)

Jiang, Xia and Liu, Chao and Shi, Gaofeng and Wang, Guoying and Wang, Zhao and Jia, Shiming and Dong, Yucan and Mishra, Puranjan and Tian, Haoqi and Liu, Yanrong (2019) The preparation of liquefied bio-stalk carbon nanofibers and their application in supercapacitors. RSC Advances, 9. pp. 23324-23333. ISSN 2046-2069. (Published)

Jiang, Xia and Shi, Gaofeng and Wang, Guoying and Mishra, Puranjan and Liu, Chao and Dong, Yucan and Zhang, Peng and Tian, Haoqi and Liu, Yanrong and Wang, Zhao and Zhang, Qi and Zhang, Hongquan (2019) A hydrothermal carbonization process for the preparation of activated carbons from hemp straw : an efficient electrode material for supercapacitor application. Ionics, 25 (7). pp. 3299-3307. ISSN 0947-7047. (Published)

Jiang, Xiaoxia and Sim, Yu Ling and Doh, Shu Ing and Chin, Siew Choo and Lim, Kar Sing (2019) Modelling failure pressure of pipeline composite repair design using finite element analysis incorporating putty’s contribution. In: 29th International Conference On Structural Failures, 20 - 24 May 2019 , Miedzyzdroje, Poland. pp. 1-9., 284. ISSN 2261-236X

Jing, Wang and Naji, Hafeth Ibrahem and Zehawi, Raquim Nihad and Hasan Ali, Zainab and Al-Ansari, Nadhir and Yaseen, Zaher Mundher (2019) System dynamics modeling strategy for civil construction projects : the concept of successive legislation periods. Symmetry, 11 (5). pp. 1-18. ISSN 2073-8994. (Published)

Jing, Wang and Yaseen, Zaher Mundher and Shamsuddin, Shahid and Saggi, Mandeep Kaur and Tao, H. and Kisi, Ozgur and Salih, Sinan Q. and Al-Ansari, Nadhir and Chau, Kwok-Wing (2019) Implementation of evolutionary computing models for reference evapotranspiration modeling: Short review, assessment and possible future research directions. Engineering Applications of Computational Fluid Mechanics, 13 (1). pp. 811-823. ISSN 1994-2060. (Published)

Jing Thin, Heng and Abdulbari, Hayder A. and Abdullah Mohammed Basher, Esmail (2019) Assessment of capacitive deionization microfluidic desalination via electrode microstructure analysis. In: Materials Today: Proceedings ; 2018 International Conference on Chemical Sciences and Engineering: Advance and New Materials, ICCSE 2018, 7-8 November 2018 , Melaka. pp. 1354-1362., 19. ISSN 2214-7853

Jnr, Bokolo Anthony and Mazlina, Abdul Majid and Awanis, Romli (2019) Case Based Reasoning for Green Information Systems Infusion and Assimilation among IT Professionals in University Campuses. Scientia Iranica, 26 (1). pp. 127-135. ISSN 2345-3605. (In Press / Online First) (In Press / Online First)

Johanna, Ahmad and Salmi, Baharom and Abdul Azim, Abdul Ghani and Hazura, Zulzalil and Jamilah, Din (2019) Measuring the efficiency of MFWA technique for prioritizing event sequences test cases. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.4 S1). pp. 23-28. ISSN 2278 - 3091. (Published)

Johari, N. A. and F. R. M., Romlay and W. S., Wan Harun (2019) SS 316L/HA composite via powder injection moulding: Mechanical and physical properties. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5480 -5492. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Jolius, Gimbun and Sook, Fun Pang and M. M., Yusoff (2019) Orthosiphon stamineus (Java Tea). In: Nonvitamin and Nonmineral Nutritional Supplements. Academic Press, London, United Kingdom, 327 - 333. ISBN 9780128124918

Joseph, C. V. and Mohd Yunus, M. Y. and Ismail, N. A. and Kanthasamy, R. (2019) Economic potential assessment of neodymium recovery from Malaysia e-waste resource. Materials Today: Proceedings, 17 (3). pp. 707-716. ISSN 2214-7853. (Published)

Ju, Soon Yew, @ Yew, Soon Yu (2019) Employees’ organizational citizenship behaviour toward the environment : a conditional mediation model. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Juliana, Mohd Ali (2019) Program Infaq Ramadan #BPACare Hulur Sumbangan Ceriakan Murid Sekolah. UMP News . (Unpublished)

Juliawati, Alias and W. S., Wan Harun and Mas Ayu, Hassan (2019) A Review on the Preparation of Magnesium-Based Alloys Prepared by Powder Metallurgy and the Evolution of Microstructure and Mechanical Properties. Key Engineering Materials, 796. pp. 3-10. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Junaidah, Zakaria and Che Rosmani, Che Hassan and Mahar Diana, Hamid and Ezrin Hani, Sukadarin (2019) Safety climate factors at selected chemical manufacturing plant in Malaysia. Process Safety Progress (e12096). ISSN 1547-5913. (Published)

Junaidi, Zakaria (2019) Ziarah Prihatin Ramadan-UMP Alumni extends help, brings cheers to Asnaf. UMP News . (Unpublished)

Junaidi, Zakaria (2019) Ziarah Ramadan Alumni UMP hulur bantuan ringankan beban asnaf. UMP News . (Unpublished)

Junaidi, Zakaria and Syamsul Rizal, Abdul Shukor and Khairunisak, Abd Razak and Muhammad Zarif Ikram, Ahmad Kamal (2019) Intermolecular interaction of tween 80, water and butanol in micelles formation via molecular dynamics simulation. In: The 26th Regional Symposium on Chemical Engineering (RSCE 2019), 30-31 October 2019 , Kuala Lumpur, Malaysia. pp. 1-7.. (Unpublished)

Jupin, John Arthur (2019) Phishing attack detection using machine learning method. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Jupin, John Arthur and Sutikno, Tole and Mohd Arfian, Ismail and Mohd Saberi, Mohamad and Shahreen, Kasim and Deris, Stiawan (2019) Review of the machine learning methods in the classification of phishing attack. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1545-1555. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Juraidah, A. and Putra Jaya, Ramadhansyah and M., Khairil Azman and Nurulain, C. M. and Muhammad Naqiuddin, Mohd Warid and Norhidayah, Abdul Hassan and Haryati, Yaacob and Nordiana, Mashros (2019) Performance of Nano kaolin clay as modified binder in porous asphalt mixture. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. p. 1., 244 (012036). ISSN 1755-1315

Juwairiah, Osman (2019) Karnival Pemantapan Bahasa Melayu manfaat mahasiswa antarabangsa. UMP News . (Unpublished)

Juwairiah, Osman (2019) Mustaf international student fluent in Malay. UMP News . (Unpublished)

Juwairiah, Osman (2019) Mustaf mahasiswa antarabangsa fasih berbahasa melayu. UMP News . (Unpublished)

Juwairiah, Osman (2019) Ukhuwah di Tempat Kerja. Portal Islam dan Melayu . p. 1.

Juwairiah, Osman and Mardhiyyah, Zamani and Rosjuliana Hidayu, Rosli and Farah Hanan, Aminallah and Mohamad Baihaqi, Hasni (2019) CAS-BM: Bahasa Melayu Antarabangsa. In: Innovation, Product Launching and Entrepreneurship (InnOPLEn) 2019, 27-28 Mac 2019 , Polisas, Kuantan. pp. 1-15.. ISBN e978-967-0778-48-8

Juwairiah, Osman and Mardhiyyah, Zamani and Rosjuliana Hidayu, Rosli and Jamilah Bebe, Mohamad and Mohamad Baihaqi, Hasni and Farah Hanan, Aminallah (2019) Poster Inovasi Carta Alir Seronoknya Cakap Bahasa Melayu dalam kalangan Penutur Asing (CAS-BM: Bahasa Melayu Antarabangsa) di InnOPLEn 2019. In: Innovation, Product Launching and Entrepreneurship (InnOPLEn) 2019, 27-28 Mac 2019 , Polisas, Kuantan. p. 1.. ISBN e 978-967-0778-48-8 (Submitted)

Juwairiah, Osman and Mardhiyyah, Zamani and Rosjuliana Hidayu, Rosli and Mohamad Baihaqi, Hasni and Nur Afza Syarfa, Rosli and Mohd Iszuani, Mohd Hassan and Syahrina, Ahmad (2019) The value of trust in the drama Tersasar di Jalan-Mu. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 132-166., 2019. ISSN 2518-668X

Juwairiah, Osman and Mimi Rabita, Abdul Wahit (2019) Malay language enhancement carnival benefitted UMP foreign students. UPM News . p. 1. (Unpublished)

Juwairiah, Osman and Rosjuliana Hidayu, Rosli (2019) Guru Bahasa UMP Hasil Inovasi Rangkul Anugerah. UMP News . p. 1. (Unpublished)

K

K., Abdul Hamid and Azmi, W. H. and R., Mamat and Sharma, K. V. (2019) Heat transfer performance of TiO2-SiO2 nanofluids in a tube with wire coil inserts. Applied Thermal Engineering, 152. pp. 275-286. ISSN 1359-4311. (Published)

K., Baarath and Muhammad Aizzat, Zakaria and Nurul Afiqah, Zainal (2019) An investigation on the effect of lateral motion on normal forces acting on each tires for nonholonomic electric vehicle: Experimental results. In: The 26th IAVSD Symposium on Dynamics of Vehicles on Roads and Tracks, 12-16 August 2019 , Gothenburg, Sweden. . (Unpublished)

K., Chopra and Pratik, Kumar Pathak and Mahendran, Samykano and Tyagi, V. V. and Pandey, A. K. (2019) Recent advancements in design of flat plate solar collectors. In: The International Scientific Forum (ISF2019), 16-17 December 2019 , Melaka, Malaysia. pp. 1-8.. (Unpublished)

K., Kadirgama and D., Ramasamy and M. M., Rahman and Mahendran, Samykano and W. S., W. Harun (2019) Analysis of thermal Conductivity for Cellulose Nanocrystal (CNC) based nanofluid. In: 27th Annual International Conference on Composites or Nano Engineering, 13-21 Julai 2019 , University of Granada, Spain. pp. 1-4.. (Unpublished)

K., Mohanesen and D., Ramasamy and K., Kadirgama and M. M., Noor and M. M., Rahman (2019) Flame ionization testing in an internal combustion engine to measure the speed of the flame for gaseous fuels. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012075). ISSN 1757-899X

K. A., Johari and Azizan, Ramli (2019) Major accident hazard in bioprocess facilities: A challenge to sustainable industrial development. In: Energy Security and Chemical Engineering Congress (ESCHE2019), 17-19 July 2019 , Parkroyal Resort Penang, Malaysia. pp. 1-9.. (Unpublished)

K. A., Johari and Azizan, Ramli and Mohd Shaiful Zaidi, Mat Desa (2019) Workplace risk Assessment Program for Advanced Technology Training Center (AdTec), Jerantut. In: Symposium on Knowledge Transfer 2019, 24 - 26 Nov. 2019 , Universiti Sains Malaysia. pp. 1-2.. (Unpublished)

K. A., Masri and Haryati, Awang and Putra Jaya, Ramadhansyah and Mohamad Idris, Ali and Noram Irwan, Ramli and A. K., Arshad (2019) Moisture susceptibility of porous asphalt mixture with Nano silica modified asphalt binder. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-6., 244 (012028). ISSN 1755-1315

K. H., Khalib and Nur Hairunnisa, Kamarudin and M. F. F., Ab Rashid (2019) Evaluation of rank-based crossovers to optimize real-life assembly line balancing with resource constraint. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (12014). ISSN 1757-899X

K. R., Raj and Sunarti, Abd Rahman (2019) Preliminary screening study using ffd on incorporation of graphene oxide in pvc in mixed matrix membrane to enhance CO2/CH4 separation. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-15., 702 (012041). ISSN 1757-899X

Kabir, M. Nomani and Alginahi, Yasser M. (2019) Introduction. In: Authentication Technologies for Cloud Computing, IoT and Big Data. The Institution of Engineering and Technology (IET), pp. 1-12. ISBN 9781785615573

Kabir, M. Nomani and Alginahi, Yasser M. and Ali, J. and Abdel-Raheem, E. (2019) Optimal search algorithm in a big database using interpolation–extrapolation method. Electronics Letters, 55 (21). pp. 1130-1133. ISSN 0013-5194. (Published)

Kalaiarasan, Muthusamy and Mimi Sakinah, A. M. (2019) Determination of Factors Affecting Extraction of Rebaudioside A & Stevioside from Stevia Leaves. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 120-130. ISSN 2289-697X. (Published)

Kamal Z., Zamli and Fakhrud, Din and Nazirah, Ramli and Ahmed, Bestoun S. (2019) Software module clustering based on the fuzzy adaptive teaching learning based optimization algorithm. In: Intelligent and Interactive Computing: Proceedings of IIC 2018, 8-9 August 2018 , Universiti Teknikal Malaysia Melaka (UTeM). pp. 167-177., 67. ISBN 978-981-13-6031-2

Kamaliah, Abdul Samad and Imla Syafiqah, Mohd Salleh and Mior Ahmad Khushairi, Mohd Zahari and Hafizuddin, Wan Yussof (2019) Batch study on the removal of mercury (II) ion from industrial wastewater using activated palm oil fuel ash. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment, 27-29 November 2018 , Penang, Malaysia. pp. 1126-1132., 17. ISSN 2214-7853

Kamarulzaman, Mahmad Khairai and Muhammad Nubli, Abdul Wahab and Ezrin Hani, Sukadarin (2019) Ergonomics study in the stress level among Electronics Assembly Line Workers. In: 4th International Conference on Ergonomics & 2nd International Conference on Industrial Engineering (ICE & ICIE 2019), 27-28 August 2019 , Terengganu, Malaysia. pp. 1-11.. (Unpublished)

Kamil Zakwan, Mohd Azmi and Ahmad Shahrizan, Abdul Ghani and Zulkifli, Md. Yusof and Zuwairie, Ibrahim (2019) Natural-based underwater image color enhancement through fusion of swarm-intelligence algorithm. Applied Soft Computing, 85 (105810). pp. 1-19. ISSN 1568-4946 (print); 1872-9681 (online). (Published)

Kamil Zakwan, Mohd Azmi and Zuwairie, Ibrahim and Pebrianti, Dwi and Mohd Falfazli, Mat Jusof and Nor Hidayati, Abdul Aziz and Nor Azlina, Ab. Aziz (2019) Enhancing simulated kalman filter algorithm using current optimum opposition-based learning. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 1-13. ISSN 2637-0883. (Published)

Kaminsky, Walter and Boggioni, Laura and Tritto, Incoronata and S. N., Aqida (2019) Cycloolefin Polymerization. In: Reference Module in Materials Science and Materials Engineering. Elsevier Ltd, Netherlands, pp. 843-873. ISBN 978-0-12-803581-8

Kanchana, Manirajah and Sheela, Sukumaran and Abdullah, PKC20005 and Nornasuha, Abdullah and Hazirah A., Razak and Nurul Aini, Razali (2019) Evaluation of low cost-activated carbon produced from waste tyres pyrolysis for removal of 2-chlorophenol. Bulletin of Chemical Reaction Engineering & Catalysis, 14 (2). pp. 443-449. ISSN 1978-2993. (Published)

Karen Jennifer, Ganasen (2019) Comparative study on occupational stress among nursing staff in rural and urban healthcare institutions. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Karim, Ahasanul and Islam, M. Amirul and C. K. M., Faizal and Yousuf, Abu and Howarth, Martin and Dubey, Bipro Nath and Cheng, C. K. and Khan, Maksudur R. (2019) Enhanced Biohydrogen Production from Citrus Wastewater Using Anaerobic Sludge Pretreated by an Electroporation Technique. Industrial & Engineering Chemistry Research, 58 (2). pp. 573-580. ISSN 1520-5045. (Published)

Karim, Ahasanul and Islam, M. Amirul and Yousuf, Abu and Khan, Maksudur R. and C. K. M., Faizal (2019) Microbial Lipid Accumulation through Bioremediation of Palm Oil Mill Wastewater by Bacillus cereus. ACS Sustainable Chemistry & Engineering, 7 (17). pp. 14500-14508. ISSN 2168-0485. (Published)

Kartika Idayu, Tajul Arifin (2019) SMART (Smart mathematic with augmented reality technology) application for preschool. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Kasturi, Sivabalan and Zuraina, Ali (2019) Mobile Instant Messaging as Collaborative Tool for Language Learning. International Journal of Language Education and Applied Linguistics (IJLEAL), 9 (1). pp. 99-109. ISSN 2289-7208 (print); 2289-9294 (online). (Published)

Kaur, Jesbains and Nurfatihah, Jamil and Syed, Shahabuddin and Pandey, A. K. and Saidur, R. and Hagos, F. Y. and Singh, Baljit (2019) The Effects of Graphene on Microstructural and Thermal Properties of Calcium Chloride Hexahydrate PCM. In: IEEE International Conference and Utility Exhibition on Green Energy for Sustainable Development (ICUE 2019), 24-26 October 2018 , Phuket, Thailand. pp. 1-6.. ISBN 978-9-7482-5799-0

Kauthar, Mohd Daud and Mohd Saberi, Mohamad and Zalmiyah, Zakaria and Rohayanti, Hassan and Zuraini, Ali Shah and Safaai, Deris and Zuwairie, Ibrahim and Suhaimi, Napis and Sinnott, Richard O. (2019) A non-dominated sorting differential search algorithm flux balance analysis (ndsDSAFBA) for in silico multiobjective optimization in identifying reactions knockout. Computers in Biology and Medicine, 113 (103390). pp. 1-2. ISSN 0010-4825. (Published)

Kavin, J. and Mohd Rashidi, Maarof and Ahmad, A. H. (2019) Investigation of nickel aluminium bronze castings properties by degassing agent technique. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-12., 469 (012037). ISSN 1757-899X

Kee, Heng Yik (2019) Psychological impact of noise exposure among machine operators and non-machine operators in construction sites in Perak, Malaysia. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Kee, Heng Yik and Nur Syafiqah, Fauzan and Widia, Mirta (2019) Psychological impact of noise exposure among machine and non-machine operators in construction industry. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012055). ISSN 1757-8981

Keeran, Anamalai (2019) Development and analysis of Ethylene Glycol/Nanocellulose based Nanofluid Coolant for machining SUS 304 stainless steel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Keeran, Anamalai and Lingenthiran, Samylingam and K., Kadirgama and Samykano, Mahendran and G., Najafi and D., Ramasamy and M. M., Rahman (2019) Multi-objective optimization on the machining parameters for bio-inspired nanocoolant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1533-1544. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Kelvin Leong, Jiun Kiat and Nur Izzati Khoirunnisa, Ismail and Nurrina, Rosli and Erny Afiza, Alias (2019) Study of nozzle distance and oil flow rate effects on the droplets size of minimum quantity lubrication. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Khadijah Husna, Abd Hamid (2019) Semi-refined carrageenan/glycerol/α-tocopherol hybrid films as active packaging for extending the shelf life of meat. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khadijah Husna, Abd Hamid and Wan Amnin, Wan Yahaya and Neenasha Bebe, Mohd Nor and Alyaa Syahierra, Ghazali and Siti Kholijah, Abdul Mudalip and Norashikin, Mat Zain and Almajano, María Pilar and Nurul Aini, Mohd Azman (2019) Semirefined Carrageenan (SRC) Film Incorporated with α-Tocopherol and Persicaria minor for Meat Patties Application. Indonesian Journal of Chemistry, 19 (4). pp. 1008-1018. ISSN 1411-9420 (Print); 2460-1578 (Online). (Published)

Khadijah Husna, Abd Hamid and Wan Amnin, Wan Yahaya and Nur 'Alia Zaini, Mohd Saupy and María Pilar, Almajano and Nurul Aini, Mohd Azman (2019) Semi‐refined carrageenan film incorporated with α-tocopherol: Application in food model. Journal of Food Processing and Preservation. pp. 1-11. ISSN Print (1745-4549); online (0145-8892). (Unpublished) (Unpublished)

Khairil Anuar, Khairi and Mohd Faizal, Jamlos and Surentiran, Padmanathan and Mohd Aminudin, Jamlos and Muammar, Mohamad Isa (2019) Low insertion loss of surface mount device low pass filter at 700 MHz. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 382-388. ISSN 2302-9285. (Published)

Khairil Azman, Masri and Ahmad Kamil, Arshad and Putra Jaya, Ramadhansyah and Haryati, Awang and Mohamad Idris, Ali and Ekarizan, Shaffie and Juraidah, A. and Youventharan, Duraisamy (2019) Performance of nanosilica as modified binder to improve rutting and fatigue resistance. In: 4th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2019), 30-31 October 2019 , Putrajaya International Convention Centre (PICC) Putrajaya, Malaysia. pp. 1-4.. (Unpublished)

Khairil Azman, Masri and Putra Jaya, Ramadhansyah and Mohamad, Idris Ali and Noram Irwan, Ramli and Haryati, Awang (2019) Visco-Elastic Characteristic of Bitumen Incorporating Nano Silica. International Journal of Recent Technology and Engineering, 7 (6). pp. 45-49. ISSN 2277-3878. (Published)

Khairul Aiman, Zainal Abidin and Muhammad Fakhrul, Yusuf (2019) Factors that influence abandoned housing project: An IPMA analysis on the Malaysian construction industry. In: Proceedings of Abstracts of the 3rd International Conference on the Future of Asean (ICoFA) 2019, 4-6 June 2019 , Perlis, Malaysia. pp. 1-4.. ISBN 97896715843

Khairull Nasruddin, Mansor and Mohd Shakirun Amin, Abdul Halim and Nazruddin, Mat Ali and W. Z. W. A., Rahman and Syamsul Bahari, Abdullah (2019) Integrating ILS in dissolving palm fruit cellulose. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (1). ISSN 1757-8981

Khairunisa, Muthusamy and A. M., A. Budiea and N. S., Muhammad Zam and N. Ahmad, Nadzri and Shariza, Mat Aris and Mohd Warid, Hussin (2019) Performance of fly ash cement sand brick containing palm oil clinker as mixing ingredients. In: International Conference on Agricultural Technology, Engineering, and Environmental Sciences (ICATES) 2019, 21-23 August 2019 , Banda Aceh, Indonesia. pp. 1-7.. (Unpublished)

Khairunisa, Muthusamy and Mirza, Jahangir and Nur Azzimah, Zamri and Mohd Warid, Hussin and Anwar, P. P. Abdul Majeed and Kusbiantoro, Andri and Budiea, Ahmed Mokhtar Albshir (2019) Properties of high strength palm oil clinker lightweight concrete containing palm oil fuel ash in tropical climate. Construction and Building Materials, 199. pp. 163-177. ISSN 0950-0618. (Published)

Khairunisa, Muthusamy and Mohamad Safwan, Jaafar and Nili Wahida, Azhar and Nurazzimah, Zamri and Nadiah, Samsuddin and Ahmed Mokhtar, Albshir Budiea and Mohd Faizal, Md Jaafar (2019) Properties of oil palm shell lightweight aggregate concrete containing fly ash as partial cement replacement. In: 4th International Conference on Construction and Building Engineering & 12th Regional Conference in Civil Engineering, 20-22 August 2019 , Langkawi, Malaysia. pp. 1-5.. (Unpublished)

Khalaf, Emad Taha (2019) An efficient indexing and retrieval of iris biometrics data using hybrid transform and firefly based K-means algorithm title. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: N. Mohammed, Muamer).

Khalid, Abdulrahman and Ahmed, Abdulghani Ali and Mohammed, Muamer N. (2019) Investigation model for locating data remnants on cloud storage. In: ICO 2018: Intelligent Computing & Optimization, 4-5 October 2018 , Pattaya, Thailand. pp. 246-256., 866. ISBN 978-3-030-00979-3

Khalifa, Nasradeen A. and A., Zulkiple and H. F., Suhandri (2019) Factors influencing local road (JKR U2/U3) damage in Malaysia. Jordan Journal of Civil Engineering, 13 (4). pp. 609-622. ISSN 1993-0461. (Published)

Khalimi Johan, Abd Hamid and S., Saad and Hazlan, Abdul Hamid and Nor Maslina, Mohsan and Doh, Shu Ing and Nor Ashikin, Muhamad Khairussaleh and Zahrizan, Zakaria and J., Mucklow (2019) Behaviour of perforated built-up cold-formed steel sections with edge and web stiffeners. In: Sustainable & Integrated Engineering International Conference (SIE2019), 8-9 December 2019 , Putrajaya, Malaysia. p. 1.. (Unpublished)

Khalimi Johan, Abd Hamid and Sariffuddin, Saad and Hazlan, Abdul Hamid and Omar, Jamaludin and Mohammad Affendy, Omardin and Nor Maslina, Mohsan (2019) Behavior of perforated cold-formed steel sections with trapezoidal web stiffeners. In: Putrajaya International Multidisciplinary Conference on Business and Engineering (PIMCBE 2019), 7-8 September 2019 , Putrajaya, Malaysia. pp. 1-7..

Khalis, Mokhtar and Hazri Dahalan, Md Razip and Effinizam, Abdul Latip (2019) Operation effect to voltage SAG Immunity Levels of AC Contractors at petrochemical plant in Pahang, Malaysia. AIM, 1796. pp. 1-5. ISSN 2032-9644. (Published)

Khamisah, Abdul Hamid (2019) Forced convection heat transfer performance of TiO2-SiO2 nanofluids with wire coil inserts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khan, Al’aina Yuhainis Firus and Ahmed, Qamar Uddin and Narayanamurthy, Vigneswaran and Shakirah, Razali and Faizah, Abdullah Asuhaimi and Mohammed S. M., Saleh and Muhammad Farid, Johan and Khatib, Alfi and Azman, Seeni and Ridhwan, Abdul Wahab (2019) Anticancer activity of grassy Hystrix brachyura bezoar and its mechanisms of action: An in vitro and in vivo based study. Biomedicine & Pharmacotherapy, 114. pp. 1-13. ISSN 0753-3322. (Published)

Khan, Arshad Ali and Mudassir, Jahanzeb and Akhtar, Safia and Murugaiyah, Vikneswaran and Yusrida, Darwis (2019) Freeze-dried lopinavir-loaded nanostructured lipid carriers for enhanced cellular uptake and bioavailability: statistical optimization, in vitro and in vivo evaluations. Pharmaceutics, 11 (2). pp. 1-19. ISSN 1999-4923. (Published)

Khan, Asadullah (2019) Performance of public sector infrastructure projects in Pakistan : the role of project governance through stakeholder management and benefit management. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khan, Asadullah and M., Waris and Ishak, Ismail and Adeleke, A. Q. and Ahmed, Ifzal (2019) Conceptual framework for project governance of public sector infrastructure project in Pakistan. In: The European Proceedings of Social & Behavioural Sciences EpSBS: ICBSI 2018 - International Conference on Business Sustainability and Innovation, 17-19 October 2018 , Bayan Baru, Penang, Malaysia. pp. 74-79., LXV. ISSN 2357-1330

Khan, Asadullah and M., Waris and Ishak, Ismail and Mirza, Rizwan Sajid and Ali, Zaigham and Ullah, Mehfooz and Hussain, Ammar (2019) Investigating the Practices of Project Governance in Public Sector Infrastructure Program in Pakistan. Advances in Civil Engineering, 2019 (7436592). pp. 1-11. ISSN 1687-8094. (Published)

Khan, Asadullah and M., Waris and Ishak, Ismail and Mirza, Rizwan Sajid and Ullah, Mehfooz and Usman, Faizal (2019) Deficiencies in Project Governance: An Analysis of Infrastructure Development Program. Administrative Sciences, 9 (1). pp. 1-15. ISSN 2076-3387. (Published)

Khan, Imran and Ainol Haryati, Ibrahim and Asiah, Kassim and Khan, Raja Muhammad Ishtiaq (2019) Evaluating the efficacy of active reading software in enhancing EFL learners’ reading comprehension skills. International Journal of Scientific and Technology Research, 8 (12). pp. 1861-1869. ISSN 2277-8616. (Published)

Khan, Raja Muhammad Ishtiaq and Noor Raha, Mohd Radzuan and Alkhunaizan, Abdulmohsin Suliman and Mustafa, Ghulam and Khan, Imran (2019) The Efficacy of MALL Instruction in Business English Learning. International Journal of Interactive Mobile Technologies (iJIM), 13 (8). pp. 60-73. ISSN 1865-7923. (Published)

Khan, Raja Muhammad Ishtiaq and Noor Raha, Mohd Radzuan and Shahbaz, Muhammad and Ainol Haryati, Ibrahim (2019) Efficacy of methodological practices undertaken by Saudi English teachers in public schools during their formative phase. English Review: Journal of English Education, 7 (2). pp. 47-54. ISSN 2541-3643. (Published)

Khan, Tanveer Ahmed and Anisah Sajidah, Haji Saud and Saidatul Shima, Jamari and Mohd Hasbi, Ab. Rahim and Park, Ji-Won and Kim, Hyun-Joong (2019) Hydrothermal carbonization of lignocellulosic biomass for carbon rich material preparation : a review. Biomass and Bioenergy, 130. pp. 1-2. ISSN 0961-9534. (Published)

Khan, Tanveer Ahmed and Kim, Hyun-Joong and Gupta, Arun and Saidatul Shima, Jamari and Rajan, Jose (2019) Synthesis and characterization of carbon microspheres from rubber wood by hydrothermal carbonization. Journal of Chemical Technology and Biotechnology, 94 (5). pp. 1374-1383. ISSN 1097-4660. (Published)

Khatun, Fatema and Azrina, Abd Aziz and Sim, Lan Ching and Monir, Minhaj Uddin (2019) Plasmonic enhanced Au decorated TiO2 nanotube arrays as a visible light active catalyst towards photocatalytic CO2 conversion to CH4. Journal of Environmental Chemical Engineering. pp. 1-10. ISSN 2213-3437. (In Press / Online First) (In Press / Online First)

Kho, Yap Bing and Hussanan, Abid and Muhammad Khairul Anuar, Mohamed and Mohd Zuki, Salleh (2019) Heat and mass transfer analysis on flow of Williamson nanofluid with thermal and velocity slips: Buongiorno model. Propulsion and Power Research, 8 (3). pp. 243-252. ISSN 2212-540X. (Published)

Khodabakhshi, Farzad and L. H., Shah and Gerlich, Adrian (2019) Dissimilar laser welding of an AA6022-AZ31 lap-joint by using Ni-interlayer: novel beam-wobbling technique, processing parameters, and metallurgical characterization. Optics & Laser Technology, 112. pp. 349-362. ISSN 0030-3992. (Published)

Kiew, Hui Hii and Vigneswaran, Narayanamurthy and Fahmi, Samsuri (2019) ECG noise reduction with the use of the ant lion optimizer algorithm. Engineering, Technology & Applied Science Research, 9 (4). pp. 4525-4529. ISSN 2241-4487 (print); 1792-8036 (online). (Published)

Koay, Li Woon (2019) Design and development of a wireless indoor smart energy saving and monitoring. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Manap, Hadi).

Kohbalan, Moorthy and Ali, Mohammed Hasan and Mohd Arfian, Ismail and Chan, Weng Howe and Mohd Saberi, Mohamad and Safaai, Deris (2019) An Evaluation of Machine Learning Algorithms for Missing Values Imputation. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12S2). pp. 415-420. ISSN 2278-3075. (Published)

Kormin, S. and Kormin, F. and Beg, M. D. H. (2019) Effect of plasticizer on physical and mechanical properties of ldpe/sago starch blend. In: Journal of Physics: Conference Series, International Conference on Mechanical and Manufacturing Engineering (ICME2018), 16-17 July 2018 , Johor, Malaysia. pp. 1-11., 1150 (012032). ISSN 1742-6588 (print); 1742-6596 (online)

Kormin, S. and Kormin, F. and Beg, M. D. H. (2019) Study on the biodegradability and water adsorption of ldpe/sago starch blend. In: Journal of Physics: Conference Series, International Conference on Mechanical and Manufacturing Engineering (ICME2018), 16-17 July 2018 , Johor, Malaysia. pp. 1-8., 1150 (012033). ISSN 1742-6588 (print); 1742-6596 (online)

Kouhi, Monireh and Jayarama Reddy, Venugopal and Ramakrishna, Seeram (2019) GPTMS-modified bredigite/PHBV nanofibrous bone scaffolds with enhanced mechanical and biological properties. Applied Biochemistry and Biotechnology, 188 (2). pp. 357-368. ISSN 0273-2289. (Published)

Kozaki, D. and Norhasmira Idayu, Harun and Chong, C. H. and Murni Hayati, Esraruddin and Nor Atiah, Yunus and Aini Syazana, Derahman and Pu, Kee Seng and Nurul Syazwani, Alias and Kumutharani, Annamalai and Sarmila, Nagappan and Mohd Hasbi, Ab. Rahim and M. M., Yusoff (2019) Identification of polluted sites in four major rivers in Kuantan, Malaysia based on water chemistry estimates of aquatic microbial activity. Sustainability, 11 (14). pp. 1-19. ISSN 2071-1050. (Published)

Krishnan, Kautham (2019) Merit management web application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Krishnan, Santhana and Mohd Fadhil, Md Din and Shazwin, Mat Taib and Mohd Nasrullah, Zulkifli and Mimi Sakinah, A. M. and Zularisam, A. W. and Kamyab, Hesam and Chelliapan, Shreeshivasan and Rezania, Shahabaldin and Singh, Lakhveer (2019) Accelerated two-stage bioprocess for hydrogen and methane production from palm oil mill effluent using continuous stirred tank reactor and microbial electrolysis cell. Journal of Cleaner Production, 229. pp. 84-93. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Krishnan, Santhana and Nor Syahidah, Zulkapli and Mohd Fadhil, Md Din and Zaiton, Abd Majid and Honda, Mitsuhiro and Ichikawa, Yo and Fadzlin, Md Sairan and Mohd Nasrullah, Zulkifli and Nickholas Anting, Anak Guntor (2019) Statistical optimization of titanium recovery from drinking water treatment residue using response surface methodology. Journal of Environmental Management, 255 (109890). ISSN 0301-4797. (Published)

Kristanti, Risky Ayu and Hadibarata, Tony and Al Qahtani, Hamad M. S. (2019) Adsorption of bisphenol A on oil palm biomass activated carbon: characterization, isotherm, kinetic and thermodynamic studies. Biointerface Research In Applied Chemistry, 9 (5). pp. 4217-4224. ISSN 2069-5837. (Published)

Ku Muhammad Naim, Ku Khalif and Adam Shariff Adli, Aminuddin and Ahmad Syafadhli, Abu Bakar and Noor Zuraidin, Mohd Safar and Alexander, Gegov (2019) A reliability based consistent fuzzy preference relations – fuzzy similarity for risk assessment in oil and gas industry. In: The Ninth International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2019), 20-22 November 2019 , Tokyo, Japan. pp. 1-6.. ISBN 978-4-909106025 C3051

Kumar, Nallapaneni Manoj and Sudhakar, K. and Samykano, M. (2019) Performance evaluation of CdTe BIPV roof and façades in tropical weather conditions. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42 (9). pp. 1057-1071. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Kumutha Naidu, Gunasegran (2019) Intelligent bee hive with honey flow extractor with application of solar panel as power source. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Kunwar, Ria and Harilal, Midhun and Krishnan, Syam G. and Pal, Bhupender and Izan Izwan, Misnon and Mariappan, C. R. and Ezema, Fabian I. and Elim, Hendry Izaac and Yang, Chun-Chen and Rajan, Jose (2019) Pseudocapacitive charge storage in thin nanobelts. Advanced Fiber Materials, 1 (3-4). pp. 205-213. ISSN 2524-7921. (Published)

Kurniawan, Tedi and Anwar, M. A. and Oktiani, R. and Ragadhita, R. and Nandiyanto, A. B. D. and Aziz, M. (2019) Influences of solvent types on the formation of graphene in the electrochemical exfoliation method. Materials Physics and Mechanics, 42 (2019). pp. 151-157. ISSN 1605-8119. (Published)

Kusbiantoro, Andri and Amalina Hanani, Ismail and Rahimah, Embong (2019) Pozzolanic reactivity of coal bottom ash after chemically pre-treated with sulfuric acid. In: 7th International Conference on Nanostructures, Nanomaterials and Nanoengineering, ICNNN 2018 and International Conference on Materials Technology and Applications, ICMTA 2018, 26-29 October 201 , Sapporo; Japan. pp. 212-216., 947. ISSN 0255-5476

Kweh, Qian Long and Norazlin, Ahmad and Irene, Wei Kiong Ting and Zhang, Cheng and Hasahudin, Hassan (2019) Board gender diversity, board independence and firm performance in Malaysia. Institutions and Economies, 11 (2). pp. 1-20. ISSN 2232-1349. (Published)

L

L. A., Aziz and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and Sharidan, Shafie (2019) Mixed Convection Boundary Layer Flow on a Solid Sphere in a Viscoelastic Micropolar Fluid. In: Proceedings of the Third International Conference on Computing, Mathematics and Statistics (iCMS2017), 7-8 December 2017 , Langkawi, Malaysia. pp. 111-117.. ISBN 978-981-13-7279-7

L. J., Yue and Mohd Fakhrurrazi, Ishak and M. S. I., Zaini and M. F., Zolkepli (2019) Rainfall induced residual soil slope instability: building cracked and slope failure. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Green Civil and Environmental Engineering, 4-6 September 2019 , Malang, East Java, Indonesia. pp. 1-11., 669 (012004). ISSN 1757-899X

L. S., Chang and M. N. M., Kahar (2019) Modelling and evaluating UMP Examination timetable. In: International Conference On Computational Science And Information Management, 21 - 23 March 2019 , Lombok Indonesia. pp. 1-6.. (Unpublished)

Lahimer, A. A. and K., Sopian and Amir, Abdul Razak and M. H., Ruslan and Alghoul, M. A. (2019) Experimental investigation on the performance of solar chimney for reduction of vehicle cabin soak temperature. Applied Thermal Engineering, 152. 247 - 260. ISSN 1359-4311. (Published)

Lai, Kok Yee and Tan, Lit Ken and Asako, Yutaka and Lee, Kee Quen and Chuan, Zun Liang and Wan Nur Syahidah, Wan Yusoff and Homma, Koji and Arada, Gerald Pacaba and Gan, Yee Siang and Tey, Wah Yen and Kong, Calvin Leng Sing and Kamadinata, Jane Oktavia and Taguchi, Akira (2019) Cloud optical depth retrieval via sky’s infrared image for solar radiation prediction. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). pp. 1-14. ISSN 2289-7879. (Published)

Laila Amera, Aziz and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh (2019) Development on mathematical model of convective boundary layer flow of viscoelastic fluid with microrotation effect under constant wall temperature thermal condition over a bluff body. ASM Science Journal, 12 (S. I. 5). pp. 86-90. ISSN 1823-6782. (Published)

Lam, Cheng Yong (2019) Finite element analysis of steel frame for high rise building structure using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lardhi, Fatima Ali Salah (2019) An analysis of English pronunciation learning strategies among Arab EFL learners in Universiti Malaysia Pahang (UMP). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Radzuan, Noor Raha).

Latifah, Arifin and Mohd Aizat, Shamsuddin (2019) Dakwa bumi mendatar akibat salah faham al-quran, hadis. Berita Harian . pp. 54-55.

Latifah Naina, Mohamed and Fernando, Yudi (2019) Research note on eco-efficient supply chain integration. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 736-745.. ISSN 2518-668X

Latifah Naina, Mohamed and Fernando, Yudi and Muhammad Shabir, Shaharudin (2019) Extended eco-efficient supply chain integration management model: A research note. Journal of Governance & Integrity, 3 (1). pp. 100-110. ISSN 2600-7479. (Published)

Lau Sze Yii, Betty and Wan Ismail, Wan Muhammad Syafiq and Fatin Nasuha, Yahya and Ruwaida, Abdul Rasid (2019) The effect of operating temperature and equivalence ratio in an entrained flow gasification of EFB. In: Materials Today: Proceedings; 2018 International Conference on Chemical Sciences and Engineering: Advance and New Materials, ICCSE 2018, 7-8 November 2018 , Melaka. pp. 1373-1381., 19. ISSN 2214-7853

Laupa, Junus (2019) Kerja misi sedikit 
lebih 
mudah. Utusan Online .

Laupa, Junus (2019) Peranti bantu rawatan. Utusan Malaysia . p. 22.

Laupa, Junus (2019) UMP hasil inulin kesihatan. Utusan Online .

Law, Peng Hang (2019) Development of working at height management system based on legislations in Malaysia. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Law, Woon Phui and Jolius, Gimbun (2019) Thermal performance enhancement of non-premixed syngas combustion in a partial combustion unit by winged nozzle: Experimental and CFD study. Energy, 182. 148 - 158. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Law, Woon Phui and Norliyana, Erain and Noram Irwan, Ramli and Jolius, Gimbun (2019) Assessment of chlorine leak dispersion around Gebeng industrial area and potential evacuation route. Atmospheric Research, 216. pp. 117-129. ISSN 0169-8095. (Published)

Lazarus, Kelvin and Nurul Hazlina, Noordin and Zuwairie, Ibrahim (2019) An enhanced simulated kalman filter algorithm and its application in adaptive beamforming. In: IEEE International RF and Microwave Conference, RFM 2018, 17 - 19 Disember 2018 , Park Royal Penang. pp. 1-4..

Lebcir, Mohamed and Suryanti, Awang (2019) A review on type of attacks on fingerprint image and watermarking techniques. In: IOP Conference Series: Materials Science and Engineering, Joint Conference on Green Engineering Technology & Applied Computing 2019, 4-5 February 2019 , Bangkok, Thailand. pp. 1-6., 551 (012071). ISSN 1757-8981 (Print), 1757-899X (Online)

Lee, Chia Kuang and Yiu, Tak Wing and Lim, Wei Xin and Adeleke, A. Q. and Toh, Tien Choon (2019) Status and barriers impeding utilization of project management tools: epidemic for tripartite construction parties in Malaysia. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 289-312., 2019. ISSN 2518-668X

Lee, Chong Hoe (2019) Diversity of stress ranges in cables of cable-stayed bridge due to traffic loads and far-field seismic excitation. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee, Hui Li (2019) The impact of neighbourhood facilities towards the homebuyer’s buying decision for residential property in Johor Bahru. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lee, Khai Loon (2019) German's business engineering is now in Malaysia. UMP News . (Unpublished)

Lee, Khai Loon (2019) Kejuruteraan Perniagaan Jerman Kini Di Malaysia. UMP News .

Lee, Khai Loon and Lim, Cean Peing (2019) Big data and predictive analytics capabilities : a review of literature on its impact on firm’s financial performance. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1057-1073., 2019. ISSN 2518-668X

Lee, Khai Loon and Nawanir, Gusman and Zahari, Abu Bakar and Jalal, Hanaysha (2019) Strengthening Supply Chain Operational Performance through Relational and Organizational Culture Capabilities. International Journal of Supply Chain Management (IJSCM), 8 (4). pp. 90-98. ISSN 2050-7399 (Online). (Published)

Lee, Tsu Yian (2019) Study on the soluble silica from palm oil clinker as partial cement replacement material. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lee, Wei Loon and Sreekar Reddy, S. and A. K., Prasada Rao (2019) CFD simulation of direct chill casting process of magnesium alloy billets. Journal of Manufacturing Processes, 45. pp. 447-454. ISSN 1526-6125. (Published)

Lee, Zhan Sheng and Chin, S. Y. and Cheng, C. K. (2019) An evaluation of subcritical hydrothermal treatment of end-of-pipe palm oil mill effluent. Heliyon, 5 (6). pp. 1-11. ISSN 2405-8440. (Published)

Lemma, Tamiru Alemu and Noraimi, Omar and Gebremariam, M.A. and Shazaib, Ahsan (2019) Anti-friction bearing malfunction detection and diagnostics using hybrid approach. In: Lecture Notes in Mechanical Engineering; 4th International Conference on Mechanical, Manufacturing and Plant Engineering, ICMMPE 2018, 14 - 15 November 2018 , Melaka. pp. 117-131.. ISSN 2195-4356 ISBN 978-981138296-3

Leong, Kah En (2019) Effect of defect width upon burst capacity of composite repaired pipe. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Leong, Mee Jiun (2019) Air pollution control using hibiscus cannabinus L. (kenaf) to reduce air pollutants. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Leong, W. D. and Lam, H. L. and Lim, C. H. and Tan, C. P. and Ponnambalam, S. G. (2019) Outcome based approach to lean and green manufacturing processing. Chemical Engineering Transactions, 72. pp. 361-366. ISSN 2283-9216. (Published)

Leong, W. D. and Teng, S. Y. and How, B. S. and Ngan, S. L. and Lam, H. L. and Tan, C. P. and Ponnambalam, S. G. (2019) Adaptive analytical approach to lean and green operations. Journal of Cleaner Production, 235. pp. 190-209. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Leong, Wai Hong and Siti Nur Azella, Zaine and Ho, Yeek Chia and Uemura, Yoshimitsu and Lam, Man Kee and Khoo, Kuan Shiong and Kiatkittipong, Worapon and Cheng, C. K. and Show, Pau Loke and Lim, Jun Wei (2019) Impact of various microalgal-bacterial populations on municipal wastewater bioremediation and its energy feasibility for lipid-based biofuel production. Journal of Environmental Management, 249 (109384). pp. 1-7. ISSN 0301-4797. (Published)

Li, Zixiang and Janardhanan, Mukund Nilakantan and Tang, Qiuhua and Ponnambalam, S. G. (2019) Model and metaheuristics for robotic two-sided assembly line balancing problems with setup times. Swarm and Evolutionary Computation, 50 (100567). ISSN 2210-6502. (Published)

Lian Ni, Koong (2019) Finite element analysis of reinforcement design of voided concrete deck slab. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Liang, Y. Y. and K. Y., Toh and Weihs, G. A. Fimbres (2019) 3D CFD study of the effect of multi-layer spacers on membrane performance under steady flow. Journal of Membrane Science, 580. pp. 256-267. ISSN 0376-7388. (Published)

Liang, Yong Yeow (2019) Unsteady slip velocity to improve mass transfer in spiral wound reverse osmosis membrane (SWM) systems. , [Research Report: Research Report] (Unpublished)

Lichtfouse, Eric and Morin-Crini, Nadia and Fourmentin, Marc and Nascimento, Inara Oliveira Carmo do and Queiroz, Luciano Matos and Mohd Yuhyi, Mohd Tadza and Picos-Corrales, Lorenzo A. and Pei, Haiyan and Wilson, Lee D. and Crini, Grégorio (2019) Chitosan for direct bioflocculation of wastewater. Environmental Chemistry Letters. pp. 1-19. ISSN 1610-3661. (In Press / Online First) (In Press / Online First)

Lichtfouse, Eric and Morin-Crini, Nadia and Fourmentin, Marc and Zemmouri, Hassiba and Nascimento, Inara Oliveira Carmo do and Queiroz, Luciano Matos and Mohd Yuhyi, Mohd Tadza and Picos-Corrales, Lorenzo A. and Pei, Haiyan and Wilson, Lee D. and Crini, Grégorio (2019) Chitosan for Direct Bioflocculation Processes. In: Sustainable Agriculture Reviews 36. Springer, Cham, pp. 335-380. ISBN 978-3-030-16581-9

Liew, Shi Yan (2019) Computational fluid dynamics and experimental study of hydrodynamics in an internal airlift reactor. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Gimbun, Jolius).

Lily Diyana, Kamarudzaman (2019) Experimental study on oleochemical waste as partial cement replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Guo Hong (2019) GPS, fingerprint and QR-code based attendance system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lim, Jee Chao (2019) Reversible image steganography using ROI & RONI. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lim, Kah Qi (2019) Effect of defect length upon burst capacity of composite repaired pipe. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Kar Sing and Doh, Shu Ing and Chin, S. C. and Cheng, Hock Tian and Nordin, Yahya and Norhazilan, Md Noor and Libriati, Zardasti (2019) Mechanical properties of carbon-based epoxy grout as infill material for steel pipeline repair. , [Research Report: Research Report] (Unpublished)

Lim, Kar Sing and Siti Nur Afifah, Azraai and Nordin, Yahaya and Norhazilan, Md Noor and Zardasti, Libriati and Kim, Jang-Ho Jay (2019) Behaviour of steel pipelines with composite repairs analysed using experimental and numerical approaches. Thin-Walled Structures, 139. pp. 321-333. ISSN 0263-8231. (Published)

Lim, Li Yang (2019) The effectiveness of palm oil clinker (POC) in gabion wall for slope protection. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Lim, Ping Feng and Leong, Kah Hon and Sim, Lan Ching and Azrina, Abd Aziz and Saravanan, Pichiah (2019) Amalgamation of N-graphene quantum dots with nanocubic like TiO2 : an insight study of sunlight sensitive photocatalysis. Environmental Science and Pollution Research, 26 (4). pp. 3455-3464. ISSN 1614-7499. (Published)

Lim, Ping Feng and Leong, Kah Hon and Sim, Lan Ching and Azrina, Abd Aziz and Saravanan, Pichiah (2019) Amalgamation of N-graphene quantum dots with nanocubic like TiO2: An insight study of sunlight sensitive photocatalysis. Environmental Science and Pollution Research, 26 (4). pp. 3455-3464. ISSN 1614-7499. (Published)

Lim, Qian Pink and Darun, Mohd Ridzuan and Nawanir, Gusman and Chiam, Kee Swan (2019) Way to go: Mirroring real experiences of the escape rooms. International Journal of Innovative Technology and Exploring Engineering, 8 (12S2). pp. 1-12. ISSN 2278-3075. (Published)

Lim, Qian Pink and Mohd Ridzuan, Darun and Nawanir, Gusman (2019) Decrypting the real life escape room experience. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 385-407., 2019. ISSN 2518-668X

Lim, Sheh Hong and Matalif, Muhammad Uzair and Nurul Najihah, Mohd Nazri and Mohd Azrul Hisham, Mohd Adib (2019) Effects of blood flow pattern and cross-sectional area on hemodynamic of patient-specific cerebral aneurysm via fluid-structure interaction method: A review. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

Lim, Yee Peng and Pang, Sook Fun and M. M., Yusoff and Jolius, Gimbun (2019) Correlation between the antioxidant, total flavonoid and total phenolic content of phaleria macrocarpa fruit extract. International Journal of Recent Technology and Engineering, 8 (1). pp. 38-42. ISSN 2277-3878. (Published)

Lim, Yee Peng and Pang, Sook Fun and M. M., Yusoff and Siti Kholijah, Abdul Mudalip and Jolius, Gimbun (2019) Correlation between the extraction yield of mangiferin to the antioxidant activity, total phenolic and total flavonoid content of Phaleria macrocarpa fruits. Journal of Applied Research on Medicinal and Aromatic Plants, 14 (100224). pp. 1-11. ISSN 2214-7861. (Published)

Lim, Yee Peng and Pang, Sook Fun and M. M., Yusoff and Siti Kholijah, Abdul Mudalip and Jolius, Gimbun (2019) POCER 1927: Microencapsulation by Spray Drying Enhanced Powder Recovery and Mangiferin Stability of Phaleria macrocarpa’s Extracts. In: Proceedings of the 5th Postgraduate Colloquium for Environmental Research (POCER 2019), 8-9 August 2019 , Putrajaya, Malaysia. pp. 59-61., 8. ISBN 978-967-11279-6-4

Lim, Yee Siang (2019) Finite analysis of steel frame multi-storey building by using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ling, Fiona W. M. and Heidarinik, Somaye and Abdulbari, Hayder A. (2019) Organic Additives for the Enhancement of Laminar Flow in a Brain‐Vessels‐Like Microchannel Assembly. Chemical Engineering and Technology, 42 (9). pp. 1788-1796. ISSN 1521-4125. (Published)

Ling, Jin Kiong (2019) Synthesis and characterization of Al2O3-SnO2 composite nanofibers by electrospinning for dye-sensitized solar cells. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ling, Jin Kiong and Pal, Bhupender and K. F., Chong and Schmidt-Mende, Lukas and Bisquert, Juan and Rajan, Jose (2019) Photocurrents in crystal-amorphous hybrid stannous oxide/alumina binary nanofibers. Journal of the American Ceramic Society, 102 (10). pp. 6337-6348. ISSN 1551-2916. (Published)

Ling, Sin Yie (2019) Undrained shear strength of soft clay stabilised with silica fume and eggshell ASH. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lingenthiran, Samylingam (2019) Modelling and verification of TiO2/ZnO/EGW nano coolant on the tin milling tool performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, A/l Kadirgama).

Liu, Chao and Shi, Gaofeng and Wang, Guoying and Mishra, Puranjan and Jia, Shiming and Jiang, Xia and Zhang, Peng and Dong, Yucan and Wang, Zhao (2019) Preparation and electrochemical studies of electrospun phosphorus doped porous carbon nanofibers. RSC Advances, 9 (12). pp. 6898-6906. ISSN 2046-2069. (Published)

Liu, Xinni and Han, Fengrong and Kamarul Hawari, Ghazali and Izzeldin, I. Mohd and Zhao, Yue (2019) A review of Convolutional Neural Networks in Remote Sensing Image. In: ICSCA '19: Proceedings of the 2019 8th International Conference on Software and Computer Applications, 19-22 February 2019 , Penang, Malaysia. pp. 263-267.. ISBN 978-1-4503-6573-4

Liyana Nadirah, M. S. and Deraman, M. R. and Wan Ibrahim, W. H. and Harun, N. (2019) Diffusion coefficients of trivalent rare earth/actinide ions in acid and alkaline aqueous solutions. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang. pp. 1-10., 702 (012045). ISSN 1757-8981

Loong Lee, Cornelius Basil Tien and Wu, Ta Yeong and Ting, Chow Hung and Tan, Ju Kheng and Siow, Lee Fong and Cheng, C. K. and Jamaliah, Md. Jahim and Abdul Wahab, Mohammad (2019) One-pot furfural production using choline chloride-dicarboxylic acid based deep eutectic solvents under mild conditions. Bioresource Technology, 278. pp. 486-489. ISSN 0960-8524. (Published)

Luqman Hakim, Ahmad Shah and Khodabakhshi, Farzad and Gerlich, Adrian (2019) Effect of beam wobbling on laser welding of aluminum and magnesium alloy with nickel interlayer. Journal of Manufacturing Processes, 37. pp. 212-219. ISSN 1526-6125. (Published)

Luqman Hakim, Ahmad Shah and Sonbolestan, Seyedhossein and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2019) Dissimilar friction stir welding of thick plate AA5052-AA6061 aluminum alloys: effects of material positioning and tool eccentricity. The International Journal of Advanced Manufacturing Technology, 105 (1-4). pp. 889-904. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Lytvyn, Oleg M. and Nechuiviter, Olesia and Pershyna, Iuliia and Mezhuyev, Vitaliy (2019) Input Information in the Approximate Calculation of Two-Dimensional Integral from Highly Oscillating Functions (Irregular Case). In: Recent Developments in Data Science and Intelligent Analysis of Information: Proceedings of the XVIII International Conference on Data Science and Intelligent Analysis of Information, 4-7 June 2018 , Kyiv, Ukraine. pp. 365-373., 836. ISBN 978-3-319-97885-7

M

M., Arfat and Haryati, Yaacob and N. A., Hassan and M. N. M., Warid and M. K., Idham and C. R., Ismail and H. M., Nor and Mohd Rosli, Hainin and A., Mohamed and Nordiana, Mashros and N. Z. M., Yunus and S. A., Hassan and Putra Jaya, Ramadhansyah and M. F., Ayob (2019) Reversible moisture damage in asphalt mixture. In: IOP Conference Series: Materials Science and Engineering, 11th International Conference on Geotechnical Engineering in Tropical Regions (GEOTROPIKA), 27-28 February 2019 , Kuala Lumpur, Malaysia. pp. 1-8., 527 (012057). ISSN 1757-8981 (Print), 1757-899X (Online)

M., Lutfi and H., Arien and M., Hendrawati and Putra Jaya, Ramadhansyah and Noram Irwan, Ramli (2019) Assessment of safety performance level on simple urban residential building: Case study at Bogor City Indonesia. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 9-15..

M., Norhafana and M. M., Noor and Hagos, F. Y. and A. Aziz, Hairuddin and K., Kadirgama and D., Ramasamy and M. M., Rahman and G., Najafi (2019) Study of fuel properties test: Diesel and various blending nanoparticles based diesel. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

M., Waris and Panigrahi, Shrikant and Almuniri, Khamis Said Nasser and Soomro, Mujeeb Iqbal and Mirjat, Nayyar Hussain and Alqaydi, Eisa Salim (2019) Investigating the Dynamic Impact of CO2 Emissions and Economic Growth on Renewable Energy Production: Evidence from FMOLS and DOLS Tests. Processes, 7 (8). pp. 1-19. ISSN 2227-9717. (Published)

M., Waris and Panigrahi, Shrikant and Mengal, Abdullah and Soomro, Mujeeb Iqbal and Mirjat, Nayyar Hussain and Ullah, Mehfooz and Zarith Sufia, Azlan and Khan, Asadullah (2019) An Application of Analytic Hierarchy Process (AHP) for Sustainable Procurement of Construction Equipment: Multicriteria-Based Decision Framework for Malaysia. Mathematical Problems in Engineering, 2019 (6391431). pp. 1-20. ISSN 1024-123X (print); 1563-5147 (online). (Published)

M., Waris and Ullah, Mehfooz and Lee, Chia Kuang (2019) Sustainability Through Green Procurement: Interplay Between Leadership and Institutional Pressures. In: The European Proceedings of Social & Behavioural Sciences EpSBS: ICBSI 2018 - International Conference on Business Sustainability and Innovation, 17-19 October 2018 , Bayan Baru, Penang, Malaysia. pp. 196-205., LXV. ISSN 2357-1330

M., Waris and Zarith Sufia, Azlan and Puteri Fadzline, Muhamad Tamyez and Ullah, Mehfooz and Khan, Asadullah (2019) Analyzing the constructs of stakeholder engagement towards renewable energy projects success in Malaysia: a PLS approach. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 818-843., 2019. ISSN 2518-668X

M. A., Anwar and A. K., Zainal and Kurniawan, Tedi and Asmara, Y. P. and W. S., Wan Harun and Priyadonko, G. and Saptaji, Kushendarsyah (2019) Electrochemical exfoliation of pencil graphite core by salt electrolyte. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , UMP Library, Pekan. p. 1., 469 (1). ISSN 1757-8981

M. A., Azmi and M. N., Arifin and H., Hashim and Zainatul Bahiyah, Handani (2019) Synthesis of inter-plant water network involving multiple contaminants. In: Energy Security And Chemical Engineering Congress 2019 (ESCHE 2019), 17-19 July 2019 , Parkroyal Resort, Penang, Malaysia. pp. 1-7.. (Unpublished)

M. A., Faten Albtoush and S. I., Doh (2019) Factors effecting the cost management in construction projects. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 173-178..

M. A., Sulaiman and Mohamad Idris, Ali and M. Y., Al-Amri and Khairunisa, Muthusamy and A. M., Albshir Budiea and N., Nordin and Youventharan, Duraisamy and R., Othman (2019) Properties of concrete containing crushed palm oil clinker as partial fine aggregate replacement. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 129-135..

M. A. F., Supian and S., Mohamad and Z. H., Ismail and K. N. M, Amin and Saidatul Shima, Jamari and S. M., Shaarani and J., Zakaria and A., Abdullah (2019) Analysis on the performance of hot water extraction and alkaline extraction for sodium hydroxide-assisted steam exploded empty fruit bunch at pilot scale. In: IOP Conference Series: 1st International Postgraduate Conference on Mechanical Engineering 2018, 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

M. A. H., Aizzat and Muhamad Zuhairi, Sulaiman and Enoki, K. and Okawa, T. (2019) Heat transfer coefficient of nucleate boiling in low concentration level of single and hybrid Al2O3-SiO2 water-based nanofluids. In: IOP Conference Series: 1st International Postgraduate Conference on Mechanical Engineering 2018, 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012109). ISSN 1757-899X

M. A. H., M. Hanoin and N. S., Mohammed and M. A. I., Z. Arris and A. I., Abu Bakar and Nadzirah, Mohd Mokhtar and Amir, Abdul Razak (2019) Fabrication and performance evaluation of Integrated Solar Driven Membrane Distillation System with Serpentine-shape of Flat Plate Solar Collector for Seawater Desalination. Journal of Applied Membrane Science & Technology, 23 (3). pp. 49-63. ISSN 2600-9226. (Published)

M. A. S., Aziz Shah and M. A., Yunus and M. N., Abdul Rani and A. M., Saman and M. S. M., Sani and M. S., Mohd Zin (2019) The effect of laser stitch welding residual stress on the dynamic behaviour of thin steel structure. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5780-5790. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. Amirul, Islam and Ahasanul, Karim and Puranjan, Mishra and C. K. M., Faizal and Khan, Maksudur R. and Abu, Yousuf (2019) Role of biocatalyst in microbial fuel cell performance. In: Waste to Sustainable Energy MFCs – Prospects through Prognosis. CRC Press, Boca Raton, Florida, pp. 86-87. ISBN 9781138328211 (hbk.); 9780429448799 (online)

M. F., Hassan (2019) Theory and derivation of unsymmetrical rotor equation of the foil-air bearing rotor system and its validation with experiment data. In: IOP Conference Series: Materials Science and Engineering, 6th International Conference on Applications and Design in Mechanical Engineering, 26-27 August 2019 , Pulau Pinang, Malaysia. pp. 1-5., 670 (012003). ISSN 1757-899X

M. F., Maharuddin and Normaniha, Abdul Ghani and N. F., Jamin (2019) Two-wheeled LEGO EV3 Robot stabilisation control using fuzzy logic based PSO algorithm. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-5). pp. 149-153. ISSN 2180-1843 (Print); 2289-8131 (Online). (Published)

M. F., Masrom and Normaniha, Abd Ghani and Nurul Fadzlina, Jamin and N. A. A., Razali (2019) Stabilization of two-wheeled wheelchair with movable payload based interval type-2 fuzzy logic controller. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018, 27-28 September 2018 , Universiti Malaysia Pahang. pp. 137-149.. ISBN 978-981-13-3708-6

M. F., Othman and Abdul Adam, Abdullah and K., Kamal and Syuhaida, Asri and Zulkifli, Azmi and R., Mamat (2019) Improvement of fuel properties for palm oil methyl ester (POME) biodiesel blends using organic germanium as additives. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012121). ISSN 1757-8981 (Print), 1757-899X (Online)

M. F., Zolkepli and Mohd Fakhrurrazi, Ishak and M. S. I., Zaini (2019) Slope stability analysis using modified Fellenius's and Bishop's method. In: IOP Conference Series: Materials Science and Engineering, 11th International Conference on Geotechnical Engineering in Tropical Regions (GEOTROPIKA) and 1st International Conference on Highway and Transportation Engineering (ICHITRA) 2019, 27-28 February 2019 , Kuala Lumpur, Malaysia. pp. 1-13., 527 (012004). ISSN 1757-899X

M. F. F., Ab Rashid and A. N. M., Rose and N. M. Zuki, N. M. and F. R. M., Romlay (2019) Improved moth flame optimization algorithm to optimize cost-oriented two-sided assembly line balancing. Engineering Computations, 37 (2). pp. 638-663. ISSN 0264-4401. (Published)

M. F. F., Ab Rashid and N. M. Z., Nik Mohamed and A. N. M., Rose (2019) A modified artificial bee colony algorithm to optimise integrated assembly sequence planning and assembly line balancing. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5905-5921. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F. F., Ab Rashid and Tiwari, Ashutosh and Hutabarat, Windo (2019) Integrated optimization of mixed-model assembly sequence planning and line balancing using multi-objective discrete particle swarm optimization. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 33 (3). pp. 332-345. ISSN 1469-1760. (Published)

M. F. R. M., Mawardzi and A., Japper-Jaafar and M. S., Najib and S. M., Daud and T. M. Y. S., Tuan Ya (2019) Intelligent classification of waxy crude oil odor-profile at different temperature. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012071). ISSN 1757-8981 (Print), 1757-899X (Online)

M. F. R. M., Mawardzi and A. Japper, Jaafar and M. S., Najib and S. M., Daud and T. M. Y. S. T., Ya (2019) Classification of waxy crude oil odor-profile using gas sensor array. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012073). ISSN 1757-899X

M. H., Muhammad Sidik and S. A., Che Ghani and Mahfodzah, M. Padzi (2019) Development of a wireless surface electromyography (sEMG) signal acquisition device for power-assisted wheelchair system. International Journal of Engineering and Advanced Technology, 8 (6). pp. 3414-3418. ISSN 2249-8958. (Published)

M. H. N., Izham and M. S. M., Sani (2019) Model updating of frame structure with bolted joints. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-9., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

M. I., Adiyanto and A. A. A., Damit and S. N., Yaakup and S. A. H. S., Mustapha and Chin, Siew Choo (2019) Effect of column size on the seismic capacity of elevated reinforced concrete water tank. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-7., 244 (012010). ISSN 1755-1315

M. I., Adiyanto and F., Ahmad Jani and S. A. H., S. Mustapha and Saffuan, Wan Ahmad (2019) Estimation on amount of steel reinforcement for six storey hospital building with seismic design consideration in Malaysia. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-7., 244 (012015). ISSN 1755-1315

M. I., Adiyanto and Nur Hazwani, Mohd Rashid and Syed Abdul Haris, Syed Mustapa and Noram Irwan, Ramli (2019) Comparison on total weight of steel reinforcement for 5 story reinforced concrete building with and without seismic design. In: Proceedings of AICCE'19: AWAM International Conference on Civil Engineering, 21-22 August 2019 , Penang, Malaysia. pp. 685-694., 53. ISBN 978-3-030-32816-0

M. I. F., Mohd Haniff and Mohd Ashraf, Ahmad and Mohd Helmi, Suid and Mohd Falfazli, Mat Jusof and Ahmad Nor Kasruddin, Nasir and Mohd Zaidi, Mohd Tumari (2019) Using piecewise affine PID control scheme for double pendulum overhead crane. In: 19th International Conference on Control, Automation and Systems (ICCAS 2019)), 15-19 October 2019 , Jeju, Korea (South). pp. 1-6. (19301916). ISBN 978-89-93215-17-5

M. K. K., Fazlul and Rashid, Shah Samiur and Aizi Nor Mazila, Ramli and Ukaegbu, Chinonso Ishmael and M. H. M., Nazmul (2019) Detection of ESBL and MBL in Acinetobacter spp. and their plasmid profile analysis. Jordan Journal of Biological Sciences, 12 (3). pp. 373-378. ISSN 2307-7166. (Published)

M. K. K., Fazlul and S., Deepthi and Y., Farzana and A., Najnin and M. A., Rashid and B., Munira and C., Srikumar and M. H. M., Nazmul (2019) Detection of Metallo-B-Lactamases-Encoding genes among clinical isolates of Escherichia Coli in a tertiary care hospital Malaysia. International Journal of Pharmaceutical Research, 11 (1). pp. 290-298. ISSN 0975-2366. (Published)

M. K. K., Fazlul and S.P, Deepthi and Mohammed, Irfan and Farzana, Y. and Munira, B. and M.H.M, Nazmul (2019) Antibacterial and antifungal activity of various extracts of Bacopa monnieri. International Journal of Pharmaceutical Research, 11 (1). pp. 1698-1702. ISSN 09752366. (Published)

M. K. K., Fazlul and Y., Farzana and A., Najnin and M. A., Rashid and M. H. M., Nazmul (2019) Detection of CTX-M-type ESBLs from escherichia coli clinical isolates from a Tertiary Hospital, Malaysia. Baghdad Science Journal, 16 (3). pp. 682-688. ISSN 2078-8665. (Published)

M. Mukhtar, N. A. and Abd Rashid, Abd Aziz and Hagos, F. Y. and M. M., Noor and K., Kadirgama and R., Mamat and Abdul Adam, Abdullah (2019) The influence of formulation ratio and emulsifying settings on tri-fuel (diesel–ethanol–biodiesel) emulsion properties. Energies, 12 (9). pp. 1-24. ISSN 1996-1073. (Published)

M. N., Kathiman and Siti Kholijah, Abdul Mudalip and Rohaida, Che Man and Zatul Iffah, Mohd Arshad and Siti Zubaidah, Sulaiman and Shalyda, Md Shaarani and Jolius, Gimbun (2019) Microencapsulation of mahkota dewa plant extracts using spray drying technique. In: Energy Security and Chemical Engineering Congress 2019, 17 - 19 Julai 2019 , Parkroyal Hotel Penang. pp. 1-2.. (Unpublished)

M. N., M. Husnain and M. R. M., Akramin and Z. L., Chuan and K., Rozieana (2019) Statistical distribution for prediction of stress intensity factor using bootstrap s-version finite element model. In: International Conference on Mechanical Engineering Research, 30-31 July 2019 , Kuantan, Pahang. pp. 1-7.. (Unpublished)

M. N. A., Mukhtar and Hagos, F. Y. and M. M., Noor and R., Mamat and Abdul Adam, Abdullah and Abd Rashid, Abd Aziz (2019) Tri-fuel emulsion with secondary atomization attributes for greener diesel engine – a critical review. Renewable and Sustainable Energy Reviews, 111. pp. 490-506. ISSN 1364-0321. (Published)

M. N. A. M., Asri and N. A. Z., Abdullah and M. S. M., Fouzi and M. S. M., Sani (2019) Normal mode finite element analysis of aerofoil wing structure with different materials. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-9., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

M. N. M., Baharuddin and Norazwani, Muhammad Zain and Eida Nadirah, Roslin and Wan Sharuzi, Wan Harun and Zaeime, Sulong@Zakaria (2019) Physical properties of homogeneous particleboard based on acacia tree and polyurethane adhesive as a resins. International Journal of Engineering and Advanced Technology, 8 (6). pp. 3382-3387. ISSN 2249-8958. (Published)

M. N. M., Husnain and M. R. M., Akramin and Z. L., Chuan (2019) Surface crack growth prediction under fatigue load using the S-version Finite Element Model (S-FEM). In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012011). ISSN 1757-899X

M. N. M., Merzuki and M. R. M., Rejab and M. S. M., Sani and Zhang, Bo and Quanjin, Ma (2019) Experimental investigation of free vibration analysis on fibre metal composite laminates. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5753-5763. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. N. M., Merzuki and M. R. M., Rejab and M. S. M., Sani and Zhang, Bo and Quanjin, Ma and Wan, Rafizi (2019) Investigation of modal analysis on glass fiber laminate aluminium reinforced polymer: An experimental study. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012065). ISSN 1757-899X

M. N. M., Salleh and M., Ishak and M. H., Aiman and M. M., Quazi and A. M., Hanafi (2019) Weld Geometry Investigation on Dissimilar Boron Steel Laser Welded for TWB Application. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (4). pp. 7364-7374. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. Nazrul, H. M. Bahrudin and M. Mukhtar, N. A. and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah and Zainal Ambri, Abdul Karim (2019) Comparison between tri-fuel (diesel-ethanol-biodiesel) emulsion with and without surfactant. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018, 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-12., 2059 (020056). ISBN 978-0-7354-1787-8

M. Nomani, Kabir and Tayan, Omar and Alginahi, Yasser M. and Md Munirul, Hasan and Rahman, Md. Arafatur (2019) On the development of a web extension for text authentication on google chrome. In: International Conference On Electrical, Computer And Communication Engineering (ECCE 2019), 7-9 February 2019 , Cox'sBazar, Bangladesh. pp. 1-5.. ISBN 978-1-5386-9111-3

M. R., Hainin and Putra Jaya, Ramadhansyah and H., Awang and M., Khairil Azman and M. R., Intan Suhana and M., Nordiana and A. H., Norhidayah and Y., Haryati and I., Che Ros (2019) Marshall stability properties of asphaltic concrete with kaolin clay under aging. In: IOP Conference Series: Earth and Environmental Science, The 12th International Civil Engineering Post Graduate Conference (SEPKA), The 3rd International Symposium on Expertise of Engineering Design (ISEED), 27-28 August 2018 , Johor, Malaysia. pp. 1-7., 220 (1). ISSN Online (1755-1315); Print (17551307)

M. R., Kamaruzaman and Chin, S. Y. and Pui, E. C. L. and Prasetiawan, H. and Azizan, N. (2019) Synthesis of Biobased Polyester Polyol through Esterification of Sorbitol with Azelaic Acid Catalyzed by Tin(II) Oxide: A Kinetic Modeling Study. Industrial and Engineering Chemistry Research, 58 (2). pp. 510-516. ISSN 0888-5885. (Published)

M. S., Jadin and Muhammad Aiman, Ibrahim and Norizam, Sulaiman (2019) Development of PV module power degradation analyzer. In: 5th International Conference on Electrical, Control and Computer Engineering (INECCE 2019), 29-30 Julai 2019 , Kuantan, Pahang. pp. 1-10.. (Unpublished)

M. S., Najiha and M. M., Rahman and K., Kadirgama and D., Ramasamy (2019) Interaction effect of machining parameters on material removal rate in machining of AA6061–T6 using MQL conditions. In: 7th International Conference on Mechanical, Automotive and Materials Engineering (CMAME 2019), 7-11 December 2019 , RMIT University, Melbourne, Australia. pp. 1-7.. (Unpublished)

M. S., Najiha and M. M., Rahman and K., Kadirgama and D., Ramasamy (2019) An experimental study to evaluate the flank wear interaction with process parameters during machining of aluminium alloy under minimum quantity lubrication with TiO2 nanofluid. In: International Meeting On Collaboration Technologies 2019 (IMCT 2019), 14 - 18 Julai 2019 , Yogyakarta, Indonesia. pp. 1-6.. (Unpublished)

M. S., Shaari and A. K., Ariffin and Akiyuki, Takahashi and M. R. M., Akramin and S., Abdullah and M. N., M. Husnain (2019) Fatigue crack growth prediction using S-version finite element method for AlSi10Mg: an additive manufacturing material. In: 11th International Conference on Numerical Analysis In Engineering (NAE 2019), 20-22 August 2019 , Bangi, Malaysia. pp. 1-12.. (Unpublished)

M. S. I., Zaini and Mohd Fakhrurrazi, Ishak and Muhammad Farhan, Zolkepli (2019) Forensic assessment on landfills leachate through electrical resistivity imaging at Simpang Renggam in Johor, Malaysia. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Green Civil and Environmental Engineering, 4-6 September 2019 , Malang, East Java, Indonesia. pp. 1-11., 669 (012005). ISSN 1757-899X

M. S. M., Fouzi and M. S. M., Sani (2019) Numerical study to optimize exhaust hanger location based on finite element modelling and model updating. In: International Conference On Computational Science And Information Management, 21 - 23 March 2019 , Lombok Indonesia. pp. 1-13.. (Unpublished)

M. S. M., Sani and Azmi, W. H. and N. F. D., Razak and Zhang, B. (2019) The effect of change in flowrate on power spectral density (PSD) of automotive radiator system for flow-induced vibration monitoring. In: 1st International Postgraduate Conference on Mechanical Engineering (IPCME 2018), 31 October 2018 , Universiti Malaysia Pahang (UMP)Pekan, Pahang. pp. 1-9., 469 (012101). ISSN 1757-899X

M. S. M., Sani and K. M., Jelani and M. H. M., Razip and N. A., Nazri and Yasar, M. (2019) Dynamics investigation on motorcycle chassis based on Finite Element (FE) modelling and updating. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 Oktober 2018 , UNIVERSITI MALAYSIA PAHANG, PEKAN. pp. 1-10., 469 (1). ISSN 1757-8981

M. S. M., Sani and M. A. F. A., Rahimi and Danial, Mohamed (2019) Sound intensity mapping of two stroke engine by using hemispherical surface coordinate arrangement. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET), 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012060). ISSN 1757-8981 (Print), 1757-899X (Online)

M. S. M., Sani and M. H. N., Izham and M. N., Abdul Rani and M. A., Yunus (2019) Damage assessment on frame structure with bolted joints based on experimental modal analysis. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-9., 469 (1). ISSN 1757-8981

M. S. M., Sani and M. S. M., Fouzi and Yusrizal, Muchlis (2019) Finite Element Modelling and updating of welded joint for dynamic study of exhaust structure. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-10., 469 (1). ISSN 17578981

M. Z., Farid and Azmi, W. H. and Zawawi, N. M. M. and R., Mamat and A. I. M., Shaiful (2019) Energy and exergy analysis of compact automotive air conditioning (AAC) system. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012042). ISSN 1757-899X

M. Z., Sharif and Azmi, W. H. and A. A. M., Redhwan and R., Mamat and Najafi, G. (2019) Energy saving in automotive air conditioning system performance using SiO2/PAG nanolubricants. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1285-1297. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

M. Z. A., Zamri and Noor Yahida, Yahya and Raihan Syahirah, Ramli and Norzita, Ngadi and Widia, Mirta (2019) Characterization of banana peels waste adsorbent for preliminary study of methylene blue removal from aqueous solution. In: IOP Conference Series: Materials Science and Engineering; 4th International Conference on Ergonomics and 2nd International Conference on Industrial Engineering, ICE and ICIE 2019, 27 - 28 August 2019 , Kuala Terengganu, Terengganu. pp. 1-9., 697 (1). ISSN 1757-8981

M. Z. M., Ismail and A. H., Zainal and Nazrul Idzham, Kasim and M. A. F. M., Mukhtar (2019) A mini review: Lean management tools in assembly line at automotive industry. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-12., 469 (012086). ISSN 1757-8981 (Print), 1757-899X (Online)

M.F., Zolkepli and Mohd Fakhrurrazi, Ishak and Zaini, M.S.I. (2019) Slope stability analysis using modified Fellenius’s and Bishop’s method. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 February 2019 , Kuala Lumpu, Malaysia. , 527. ISBN 17578981

Ma, Quanjin and Rejab, M. R. M. and Idris, Mat Sahat and Zhang, Bo and Manoj Kumar, Nallapaneni (2019) Filament winding technique: SWOT analysis and applied favorable factors. SCIREA Journal of Mechanical Engineering, 2 (1). pp. 15-25. (Published)

Madan Varmma, Suparmaniam (2019) Suppression of chatter in high-speed milling machine using spindle speed variation method with microphone feedback PID controlller. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mah, K. H. and Wan Mohd Hafizuddin, Wan Yussof and Mazrul Nizam, Abu Seman and A. W., Mohammad (2019) Optimisation of interfacial polymerization factors in thin-film composite (TFC) polyester nanofiltration (NF) membrane for separation of xylose from glucose. Separation and Purification Technology, 209. pp. 211-222. ISSN 1383-5866. (Published)

Mahadi, Bahari and Syahida Nasuha, Bukhari and Jun, L.N. and Herma Dina, Setiabudi (2019) Development of fibrous mesoporous silica for catalytic reaction : A short review. In: Materials Today: Proceedings; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020, 9 - 11 August 2020 , Kuala Lumpur. pp. 33-38., 42 (1). ISSN 2214-7853

Mahmood, Ahmed and Jabbar, Waheb A. and Hashim, Yasir and Hadi, Manap (2019) Effects of downscaling channel dimensions on electrical characteristics of InAs-FinFET transistor. International Journal of Electrical and Computer Engineering (IJECE), 9 (4). pp. 2902-2909. ISSN 2088-8708. (Published)

Mahmood, Ahmed and Jabbar, Waheb A. and Hashim, Yasir and Hadi, Manap (2019) Electrical characterization of Ge-FinFET transistor based on nanoscale channel dimensions. Journal of Nano- and Electronic Physics, 11 (1). pp. 1-5. ISSN 2077-6772. (Published)

Mahmood, Ahmed and Jabbar, Waheb A. and Hashim, Yasir and Hadi, Manap (2019) Electrical Сharacterization of Ge-FinFET Transistor Based on Nanoscale Channel Dimensions. Journal Of Nano-And Electronic Physics, 11 (1). pp. 1-5. ISSN 2306-4277. (Published)

Mahmood, Mahmood H. and Osama, A K and Makky, Essam A. (2019) Phytochemical screening, antimicrobial and antioxidant efficacy of some plant extracts and their mixtures. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-12., 346.

Mahmood, Mahmood H. and Osama, A K and Makky, Essam A. and Mohd Hasbi, Ab. Rahim and Nor Hafizah, Mat Ali and Nur Diana, Hazrudin (2019) Phytochemical screening, antimicrobial and antioxidant efficacy of some plants and their mixture extracts. In: The 2nd international conference on applied biochemistry and biotechnology (ABB 2019), 21 - 24 Julai 2019 , Macau, China. pp. 1-17.. (Unpublished)

Mahmood, Osamah Maged (2019) A study of using tyre powder rubber as partially replacement of fine aggregate in concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mahmood, Syed and Ayah Rebhi, Hilles and Ridzwan, Hashim (2019) Evaluation of the antibacterial activities of skin mucus from Asian swamp eel (Monopterusalbus). Indian Journal of Geo-Marine Sciences (IJMS), 48 (12). pp. 1855-1859. ISSN 0975-1033. (Published)

Mahmood, Syed and Hilles, AYAH (2019) Activation of apoptotic cell death by skin mucus from Asian swamp eel (Monopterus albus) against human lung cancer cell line. Journal of Agricultural and Marine Sciences, 24 (12). pp. 39-43. ISSN 2410-1079. (Published)

Mahmood, Syed and Kumar Mandal, Uttam and May Kway, Oo and Bapadditya, Chatterjee (2019) Effects of Different Formulation Methods on Drug Crystallinity, Drug-Carrier Interaction, and Ex Vivo Permeation of a Ternary Solid Dispersion Containing Nisoldipine. Journal of Pharmaceutical Innovation. pp. 1-15. ISSN https://link.springer.com/article/10.1007/s12247-019-09415-2. (Published)

Mahmood, Wafaa K. and Khadum, Wafaa A. and Eman, E. and Abdulbari, Hayder A. (2019) Biopolymer-surfactant complexes as flow enhancers : characterization and performance evaluation. Applied Rheology, 29 (1). pp. 12-20. ISSN 1430-6395. (Published)

Mahyuddin, Ismail and Mansor, Sulaiman and Nurkarimah, Yusof and Faizal, Abdul Khir and Zainal Abidin, Kusmin and Yuhaniz, Mohd Yusop (2019) The application of GSP 48 in dealing with divorce cases related to witchcraft. In: Symposium on Knowledge Transfer 2019, 25 November 2019 , Universiti Sains Malaysia, Penang, Malaysia. pp. 1-4..

Mahyuddin, Ismail and Mohd Jim, Hamzah and Siti Aisyah, Romli and Jahid, Hj. Sidek and Zainal Abidin, Kusmin (2019) Menjustifikasikan ilmu dan amalah sihir sebagai satu jenayah berdasarkan peruntukan dalam Kanun Keseksaan. Jurnal Pendidikan Serantau, 6. pp. 240-259. ISSN 2289-909X. (Published)

Mahyuddin, Ismail and Nurkarimah, Yusof (2019) Missing persons and its relation with human sacrifice in witchcraft ritual: a review. In: International Conference on Law, Government and International Studies, 26 - 27 November 2019 , Thistle, Johor Bahru. pp. 1-10.. (Unpublished)

Mahyuddin, Ismail and Nurkarimah, Yusof and Anita, Abdul Rani and Jahid, Sidek (2019) Subconscious Mind: A Perspective from Aqidah, Sharica, and Tasawwuf. Humanities & Social Sciences Reviews, 7 (4). pp. 555-558. ISSN 2395-6518. (Published)

Maity, Bipradeep and Raj Krishna Roshan, Kanasan and Sunarti, Abd Rahman (2019) CO2/CH4 separation using PVDF/PVC blended membrane. In: 11th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2019), 19-20 November 2019 , Kuantan, Pahang. pp. 1-13.. (Unpublished)

Maizatul Farhain, Ismail and Nurul 'Azyyati, Sabri and Saiful Nizam, Tajuddin and Lee, Chin Mei and Siti Hatijah, Mortan and Ab. Rahim, Mohd-Hairul (2019) Isolation and identification of denitryifing from indegenous mircroorganism. Malaysian Journal Of Biochemistry & Molecular Biology (1). pp. 17-21. ISSN ISSN: 1511-2616, E-ISSN 2600-9005,. (Published)

Maizatul Nur Syafiqah, Mohd Idris (2019) Investigation on the optimum rehabilitation method in repairing road defect. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Majid, Ahmad A. A. and Tanner, Braeden and Koh, Carolyn A. (2019) Cyclopentane hydrate slurry viscosity measurements coupled with visualization. Molecular Physics, 117 (23-24). pp. 3860-3870. ISSN 0026-8976. (Published)

Makky, Essam A. (2019) Oral care products against oral pathogens. In: 3rd International Conference On Biological & Health Sciences (CIC-BIOH''S19), Joint Conference With Hawler Medical University, 30 April - 1 May 2019 , Iraq. pp. 1-2.. (Unpublished)

Makky, Essam A. and Ali, Muna Jalal (2019) Microbial fermentation biotechnology of cooked chicken bone novel substrate for L-asparaginase production. Karbala International Journal of Modern Science, 3 (4). pp. 202-211. ISSN 2405-609X. (Published)

Malakhov, Eugene and Shchelkonogov, Denys and Mezhuyev, Vitaliy (2019) Algorithms of Classification of Mass Problems of Production Subject Domains. In: ICSCA '19: Proceedings of the 2019 8th International Conference on Software and Computer Applications, 19-22 February 2019 , Penang, Malaysia. pp. 149-153.. ISBN 978-1-4503-6573-4

Malar Vizhli, Sivaguru (2019) Synthesis of catalyst from eggshell and perna v. Shell for biolubricant production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mangi, Sajjad Ali and Mohd Haziman, Wan Ibrahim and Norwati, Jamaluddin and Mohd Fadzil, Arshad and Memon, Sheeraz Ahmed and Shahiron, Shahidan and Putra Jaya, Ramadhansyah (2019) Coal bottom ash as a sustainable supplementary cementitious material for the concrete exposed to seawater. In: 5th International Conference on Energy, Environment and Sustainable Development, EESD 2018, 14-16 November 2018 , Mehran University of Engineering and TechnologyJamshoro; Pakistan. pp. 1-8., 2119 (020002). ISSN 0094-243X

Mangi, Sajjad Ali and Wan Ibrahim, M. H. and Jamaluddin, N. and Arshad, M. F. and Putra Jaya, Ramadhansyah (2019) Effects of ground coal bottom Ash on the properties of concrete. Journal of Engineering Science and Technology, 14 (1). pp. 338-350. ISSN 1823-4690. (Published)

Manoj Kumar, Nallapaneni and Sudhakar, K. and Mahendran, Samykano (2019) Performance comparison of BAPV and BIPV systems with c-Si, CIS and CdTe photovoltaic technologies under tropical weather conditions. Case Studies in Thermal Engineering, 13. pp. 1-10. ISSN 2214-157X. (Published)

Mansor, Sulaiman and Abdullah, Long and Zailin Shah, Yusoff and Ahmad Irfan, Ikmal Hisham and Ahmad Murad, Zainuddin and Hasan, Ahmad (2019) Prosedur Rawatan In-Vitro Fertilisation (IVF): Suatu Kupasan Berdasarkan Pandangan Syarak. International Journal of Humanities Technology and Civilization (IJHTC), 5 (1). pp. 42-59. ISSN 2289-7216. (Published)

Mansor, Sulaiman and Muhammad Azizur Rahman, Ramli and Hasan, Ahmad (2019) Ijtihad and its relationship with maslahah : An analysis review. International Journal of Humanities Technology and Civilization (IJHTC), 2 (7). pp. 41-48. ISSN 2289-7216. (Published)

Maoqi, Li and M. I., Ishak and P. M., Heerwan (2019) The effect of parallel steering of a four-wheel drive and fourwheel steer electric vehicle during spinning condition: a numerical simulation. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012084). ISSN 1757-8981 (Print); 1757-899X (Online)

Margono, Margono and Kaavessina, Mujtahid and Mior Ahmad Khushairi, Mohd Zahari and Anwaruddin, Hisyam (2019) Continuous Bioethanol Production Using Uncontrolled Process in a Laboratory Scale of Integrated Aerobic-Anaerobic Baffled Reactor. Periodica Polytechnica Chemical Engineering. pp. 1-7. ISSN 1587-3765. (Published)

Mariappan, Chinnasamy Ramaraj and Gajraj, V and Gade, S and Kumar, A and Dsoke, S and Indris, Sylvio and Ehrenberg, Helmut and Vijaya Prakash, Gaddam and Rajan, Jose (2019) Synthesis and electrochemical properties of rGO/polypyrrole/ferrites nanocomposites obtained via a hydrothermal route for hybrid aqueous supercapacitors. Journal of Electroanalytical Chemistry, 845. pp. 72-83. ISSN 1572-6657. (Published)

Mas Ayu, Hassan and Mustaqieem, M. M. and A., Shah and Arafat, Andril and Dambatta, M. S. (2019) Effect PLA/HA coating on dental implant using finite element method. In: The 4th International Conference on Frontiers of Composite Materials, 13-16 November 2019 , The University of Queensland, Brisbane, Australia. pp. 1-9.. (Unpublished)

Mas Ayu, Hassan and Sudin, Izman and Rosdi, Daud and A., Shah and Siti Haryani, Tomadi and M. S., Dambatta (2019) Thermal oxidation promotes growth of nanocrystalline diamond on biomedical grade Co Cr mo alloy. In: 4th International Conference on Advances in Manufacturing and Materials Engineering 2019, 29 Oct-1 Nov. 2019 , Putrajaya, Malaysia. pp. 1-3.. (Unpublished)

Mas Ira Syafila, Mohd Hilmi Tan and Ahmad Fairuz, Omar and Marzaini, Rashid and Uda, Hashim (2019) VIS-NIR spectral and particles distribution of Au, Ag, Cu, Al and Ni nanoparticles synthesized in distilled water using laser ablation. Results in Physics, 14. pp. 1-12. ISSN 2211-3797. (Published)

Mat Aris, S. and Philip, Dick Carlos and Syed Mohsin, S. M. (2019) Preliminary study on properties of oil palm shell lightweight concrete with cockle shell as mixing ingredient. In: IOP Conference Series: Materials Science and Engineering; Postgraduate Symposium in Civil and Environmental Engineering 2019, PSCEE 2019, 31 March 2019 , Batu Pahat, Johor. pp. 1-7., 601 (012016). ISSN 1757-8981

Mat Desa, Mohd Shaiful Zaidi (2019) Mechanical, thermal, electrical and flammability properties of rubber toughened polystyrene/graphene nanocomposites. , [Research Report: Research Report] (Unpublished)

Mat-Noh, Maziyah and Zain, Zainah Md and Abd Ghani, N. M. and Abdul Wahab, Yasmin and Razali, Akhtar Razul (2019) Development of controller for an underactuated autonomous underwater vehicle (AUV). , [Research Report: Research Report] (Unpublished)

Matieva, Gulbadan and Abdullayeva, Cholpon and Ahmedov, Anvarjon A. (2019) About existence of quasi-double lines of the partial mapping of space En. In: Journal of Physics: Conference Series; 2nd International Conference on Applied and Industrial Mathematics and Statistics 2019, ICoAIMS 2019, 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-5., 1366 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Matieva, Gulbadan and Abdullayeva, Cholpon and Ahmedov, Anvarjon A. (2019) Existence of immovability lines of a partial mapping of Euclidean space E5. In: Journal of Physics: Conference Series; 2nd International Conference on Applied and Industrial Mathematics and Statistics 2019, ICoAIMS 2019, 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-6., 1366 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Mazeni, Ismail and Hasmadi, Hassan and Jameyah, Sheriff (2019) Investigator Cilik : Pembelajaran berasaskan penyiasatan menerusi pendekatan projek ke arah penjanaan minda kreatif & inovatif. International Journal of Humanities Technology and Civilization (IJHTC), 2 (7). pp. 49-54. ISSN 2289-7216. (Published)

Mazeni, Ismail and Hasmadi, Hassan and Jemiyah, Sheriff (2019) Pembelajaran berasaskan penyiasatan menerusi pendekatan projek ke arah penjanaan minda kreatif dan inovatif dalam kalangan murid prasekolah. International Journal of Humanities Technology and Civilization (IJHTC), 2 (7). pp. 49-54. ISSN 2289-7216. (Published)

Mazeni, Ismail and Nurul, Aliah and Hasmadi, Hassan (2019) Developing islamic module project for preschool teachers using modified delphi technique. World Academy of Science, Engineering and Technology International Journal of Educational and Pedagogical Sciences, 13 (2). pp. 227-231. ISSN 13076892. (Published)

Maziatun, Mohamad Mazlan and Nur Aqilah, Othman and Hamzah, Ahmad (2019) Diagonalization of covariance matrix in simultaneous localization and mapping of mobile robot. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018, 27-28 September 2018 , Universiti Malaysia Pahang. pp. 285-297., 538. ISBN 978-981-13-3708-6

Mazita, Mokhtar (2019) Laporan Program Pengantarabangsaan Mahasiswa Ump Melalui Program Jejak Usahawan Muda 1.0. Project Report. Universiti Malaysia Pahang. (Unpublished)

Mazita, Mokhtar and Airin, Abdul Ghani and Noor Sarbani, Wan Muhammad and Ida Rizyani, Tahir (2019) Consumer behavior on the policy of banning the use of plastic bag in Kuantan. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1150-1155., 2019. ISSN 2518-668X

Mazita, Mokhtar and Wan Khairul Anuar, Wan Abd Manan and Ida Rizyani, Tahir and Azizan, Azit and Rozita, Mokhtar and Muhammad Aiman, Zulkifli and Muhammad Bukhory, Shaidatul Khamdi (2019) Using Structural Equation Model (SEM) as technique to examine multiple interrelated dependence relationships Total Quality Management (TQM) of Malaysia Herbal Industry. In: Proceedings of Academics World 135th International Conference, 18-19 July 2019 , Manchester, UK. pp. 8-11..

Mazlan, Abu Seman and Sharifah Maszura, Syed Mohsin and Z. M., Jaini (2019) Blast load assessment: RC wall subjected to blast load. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-11., 244 (012007). ISSN 1755-1315

Mazma Syahidatul Ayuni, Mazlan (2019) Stochastic model of cancer growth with the effect of glycosaminoglycans (GAGs) as anticancer therapeutics. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mazni, Ismail and Mohamad Muzakkir, Tajuddin and Asmida, Ideris (2019) In Situ Glycine-nitrate Combustion Synthesis of Ni-La/SiO2 Catalyst for Methane Cracking. Industrial and Engineering Chemistry Research, 58 (2). pp. 531-538. ISSN 0888-5885. (Published)

Mazni, Ismail and Ruwaida, Abdul Rasid and R. N. U., Abdul Rahman and N. S., Ahmad and M. A. W., Mohd Radzuan (2019) Integrating microwave heating pre-treatment to improve torrefaction of food waste. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012009). ISSN 1757-899X

Mazni, Saad and Rosita, Husain and Anita, Abdul Rani and Airin, AbdulGhani (2019) Empowering employees with spiritual intelligence for higher quality food-hygiene practices and food service performance of on-premise caterers. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012066). ISSN 1757-8981

Mazrul Nizam, Abu Seman and Noorlisa, Harun (2019) Simulation of pressurized water scrubbing process for biogas purification using Aspen Plus. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-6., 702 (012040). ISSN 1757-899X

Md Muziman Syah, M. M. and Nurul Adabiah, M. and Noorhazayti, A. H. and Nazaryna, M. and Noryanti, Muhammad and Mohd Zulfaezal, C. A. and Noor Ezailina, B. (2019) Comparison of surgically induced astigmatism (SIA) values using three Holladay incorporated method SIA calculators. In: Journal of Physics: Conference Series, 2nd International Conference on Applied and Industrial Mathematics and Statistics (ICoAIMS 2019), 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-7., 1366 (012053). ISSN 1742-6588 (print); 1742-6596 (online)

Md. Anwar, Hossen and Md. Shariful, Islam and Nurhafizah, Abu Talip and Md. Sakib, Rahman and Fatema, Siddika and Mostafijur, Rahman and Sabira, Khatun and Mohamad Shaiful, Abdul Karim and S. M, Hasan Mahmud (2019) Hybrid sampling and random forest machine learning approach for software detect prediction. In: 5th International Conference on Electrical, Control and Computer Engineering (INECCE 2019), 29 - 30 Julai 2019 , Swiss-Garden Beach Resort, Kuantan, Pahang. pp. 1-12.. (Unpublished)

Md. Maruf, Hassan and Umam, Mustain and Sabira, Khatun and Mohamad Shaiful, Abdul Karim and Nazia, Nishat and Mostafijur, Rahman (2019) Quantitative assessment on remote code execution vulnerability in web apps. In: 5th International Conference on Electrical, Control and Computer Engineering (INECCE 2019), 29-30 July 2019 , Swiss Garden Kuantan. pp. 1-11.. (Unpublished)

Md. Noor, Ariffin and Kaykobad Md. Rezaul, Karim and Hamidah, Abdullah and Khan, Maksudur R. (2019) Synthesis of titania doped copper ferrite photocatalyst and its photoactivity towards methylene blue degradation under visible light irradiation. Bulletin of Chemical Reaction Engineering & Catalysis, 14 (1). pp. 219-227. ISSN 1978-2993. (Published)

Megawati, . and Fardhyanti, Dewi Selvia and Sediawan, Wahyudi Budi and Anwaruddin, Hisyam (2019) Kinetics of mace (Myristicae arillus) essential oil extraction using microwave assisted hydrodistillation: Effect of microwave power. Industrial Crops and Products, 131. pp. 315-322. ISSN 0926-6690. (Published)

Mei, Kie Hon and Mohd Saberi, Mohamad and Abdul Hakim, Mohamed Salleh and Yee, Wen Choon and Kauthar, Mohd Daud and Muhammad Akmal, Remli and Mohd Arfian, Ismail and Omatu, Sigeru and Sinnott, Richard O. and Corchado, Juan Manuel (2019) Identifying a Gene Knockout Strategy Using a Hybrid of Simple Constrained Artificial Bee Colony Algorithm and Flux Balance Analysis to Enhance the Production of Succinate and Lactate in Escherichia Coli. Interdisciplinary Sciences: Computational Life Sciences, 11 (1). pp. 33-44. ISSN 1913-2751. (Published)

Meng Chung, Tiong and Hamdan, Daniyal and Mohd Herwan, Sulaiman and Mohd Shafie, Bakar and Suliana, Ab Ghani (2019) A real-time simulation platform for maximum power point tracking algorithm study in solar photovoltaic system. Applications of Modelling and Simulation, 3 (2). pp. 111-118. ISSN eISSN 2600-8084. (Published)

Mezhuyev, Vitaliy and Al-Emran, Mostafa and Mohd Arfian, Ismail and Benedicenti, Luigi and Durkahpuvanesvari, Chandran (2019) The acceptance of search-based software engineering techniques: An empirical evaluation using the technology acceptance model. IEEE Access, 7. pp. 101073-101085. ISSN 2169-3536. (Published)

Mezhuyev, Vitaliy and Lytvyn, Oleg M. and Pershyna, Iuliia and Nechuiviter, Olesia and Lytvyn, Oleg O. and Lavrik, Vladimir (2019) Acceptance of the Methods of Decision-making: A Case Study from Software Development Companies in Ukraine and Malaysia. In: ICSCA '19: Proceedings of the 2019 8th International Conference on Software and Computer Applications, 19-22 February 2019 , Penang, Malaysia. pp. 199-204.. ISBN 978-1-4503-6573-4

Mezhuyev, Vitaliy and Sadat, M. S. Nazmus and Rahman, Md. Arafatur and Refat, Nadia and Asyhari, A. Taufiq (2019) Evaluation of the likelihood of friend request acceptance in online social networks. IEEE Access, 7. pp. 75318-75329. ISSN 2169-3536. (Published)

Mimi Ereena, Solahudin Alayubi (2019) Factors that contribute to delay in construction project in Johor. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mimi Nabila, Mohd Noordin (2019) “ErgoSpillBag” beg khas tangani tumpahan bahan kimia dalam makmal. UMP News . (Unpublished)

Mimi Rabita, Abdul Wahit (2019) Bakal graduan miliki ilmu pengurusan dan teknikal dalam Program Kejuruteraan Perniagaan UMP. UMP News . (Unpublished)

Miminorazeansuhaila, Loman and Z. M., Hafizi (2019) Leak detection in a pipe using fibre bragg grating sensor. In: International Postgraduate Conference On Mechanical Engineering (IPCME), 31 Oktober 2018 , Universiti Malaysia Pahang (UMP) Pekan, Pahang. pp. 1-8., 469 (1). ISSN 17578981

Mirza, H. and Hossain, T. M. and Soh, Ping Jack and Jamlos, M. F. and Ramli, M. N. and Al-Hadi, A. A. and Hassan, E. S. and Yang, S. (2019) Deployable linear-to-circular polarizer using PDMS based on unloaded and loaded circular FSS arrays for pico-satellites. IEEE Access, 7. pp. 2034-2041. ISSN 2169-3536. (Published)

Mirza, Rizwan Sajid and Noryanti, Muhammad and Roslinazairimah, Zakaria (2019) Construct validation in secondary data: A guideline for medical data mining. In: 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICOAIMS 2019), 23-25 Julai 2019 , Kuantan, Pahang. pp. 1-8.. (Unpublished)

Mishra, Puranjan and Ameen, Fuad and Rubaiyi, M. Zaid and Singh, Lakhveer and Zularisam, A. W. and Islam, M. Amirul and Gupta, Arun and Al Nadhari, Saleh (2019) Relative effectiveness of substrate-inoculum ratio and initial pH on hydrogen production from palm oil mill effluent: Kinetics and statistical optimization. Journal of Cleaner Production, 228. pp. 276-283. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Mishra, Puranjan and Krishnan, Santhana and Rana, Supriyanka and Singh, Lakhveer and Mimi Sakinah, A. M. and Zularisam, A. W. (2019) Outlook of fermentative hydrogen production techniques: an overview of dark, photo and integrated dark-photo fermentative approach to biomass. Energy Strategy Reviews, 24. pp. 27-37. ISSN 2211-467X. (Published)

Mohamad, Fazeeda and Cheng, Jack Kie and Shamsudin, Norazidah and Safinaz, Omar and Azian, Ibrahim and Rahamaddulla, Syed Radzi (2019) Improving an emergency department flows through modeling and simulation. , [Research Report: Research Report] (Unpublished)

Mohamad, Hafiz and M. Nafis, O. Z. (2019) Investigation of the correlation between radial depth of cut (RDOC) and axial depth of cut (ADOC) using NX CAM system: simulation studies. In: Engineering Applications Of Artificial Intelligence Conference 2018 (EAAIC 2018), 2-6 December 2018 , Sutera Harbour Resort, Sabah, Malaysia. pp. 1-6., 255. ISSN 2261-236X

Mohamad, M. H. and M. Nafis, O. Z. (2019) Simulation program for 4th axis CNC machining in NX CAM system. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6971-6986. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohamad Al Aamin, Razali (2019) Solid state fermentation of Monascus purpureus in stirred drum bioreactor for production of red pigment from oil palm frond. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Amirulanwar, Tumirin (2019) The effectiveness of various type retaining wall to control coastal erosion. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohamad Ashry, Jusoh and Fahmiruddin, Esa and Rodziah, Nazlan (2019) Structural properties dependence on annealing temperature of 1-D lanthanum iron garnet nanofiber prepared via electrospinning technique. Journal of Nano Research, 59. pp. 105-111. ISSN 1662-5250. (Published)

Mohamad Ashry, Jusoh and Yeow, Y. K. and Rodziah, Nazlan and Fahmiruddin, Esa (2019) Electromagnetic shielding effectiveness of gypsum-magnetite composite at x-band frequency. Progress in Electromagnetics Research Letters, 86. pp. 21-26. ISSN 1937-6480. (Published)

Mohamad Atif, Mohamed and Norazlianie, Sazali and Fatin Nurwahda, Ahmad and Nor Hasrul Akhmal, Ngadiman and Mohd Hafiz Dzarfan, Othman (2019) A Short Review on Membranes for Helium Separation and Purifications. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 80-87. ISSN 2289-7879. (Published)

Mohamad Azmil Sahidan, Abdul Shatar (2019) Tracking of u-turn behaviour for heavy vehicles at three locations along FR2 (Gambang to Kuantan). Faculty of Engineering Technology, Universiti Malaysia Pahang.

Mohamad Hafidzul Rahman, Alias and Mohd Fadzil, Abdul Rahim and R. A., Bakar (2019) Single Hole Direct Injector Simulation Validation and Parametric Sensitivity Study. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-7..

Mohamad Hafizuddin, Mohd Yusri (2019) A study on water quality at Sungai Pandan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohamad Hakimi, Kamarudin (2019) 36 SPM leavers are excited to be at UMP. UMP News . (Unpublished)

Mohamad Hakimi, Kamarudin (2019) Jualan buku terbesar Karnival Big Bad Wolf kini di UMP. UMP News . (Unpublished)

Mohamad Hakimi, Kamarudin (2019) Teruja berada di Kampus UMP. UMP News . (Unpublished)

Mohamad Haziq, Alias and Noor Syafiqah, Hassin and Lau, Pui Pui and Izan Izwan, Misnon and Rajan, Jose (2019) Effect of PVDF-CA ratio on electrospun membrane fabrication for water filtration application. Materials Science Forum, 981. pp. 356-361. ISSN 0255-5476. (Published)

Mohamad Nabil, Mohamed (2019) Compression test of built-up C section cold-formed steel with openings. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohamad Nawawy, Jusoh and Fatmawati, Latada (2019) Kemahiran kehidupan ibu tinggal terhadap kesejahteraan keluarga. Jurnal Dunia Pengurusan, 1 (3). pp. 36-44. ISSN 2682-8251. (Published)

Mohamad Nazmi, Nasir (2019) An improved mapping pattern for digital watermarking. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohamad Rizza, Othman (2019) Fractionation of oleochemical fatty acid using vacuum dividing wall column : A controllability analysis. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (1). ISSN 1757-8981

Mohamad Rizza, Othman (2019) Industri nadir bumi dari sudut pandang pembangunan lestari. UMP News . (Unpublished)

Mohamad Rizza, Othman (2019) Industri nadir bumi dari sudut pandang pembangunan lestari (Bahagian II). UMP News . (Unpublished)

Mohamad Rizza, Othman (2019) Lestarikan pembangunan nadir bumi. Berita Harian .

Mohamad Rozi, Hassan (2019) Dimensi baharu teknousahawan. Kosmo . p. 26.

Mohamad Rozi, Hassan (2019) IR4.0: Kompetensi dan integriti. MalaysiaGazette . p. 1.

Mohamad Rozi, Hassan (2019) IR4.0: Tingkat kompetensi, tangani ketirisan nilai. Free Malaysia Today . p. 1.

Mohamad Rozi, Hassan (2019) Kecil saiz khidmat awam baik untuk pengurusan negara. Berita Harian . p. 10.

Mohamad Rozi, Hassan (2019) Keusahawanan sosial rapat jurang pendapatan. MalaysiaGazette . p. 1.

Mohamad Rozi, Hassan (2019) Pahlawan baru keusahawanan sosial. Free Malaysia Today . p. 1.

Mohamad Safwan, Ja’afar (2019) Workability and mechanical properties of oil palm shell lightweight aggregate concrete containing fly ASH as partial cement replacement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohamad Saiful Termizi, Mohamad Jani (2019) Precautionary construction management for sustainability. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohamad Syazwan, Mohd Zin and M. N., Abdul Rani and M. A., Yunus and W. I. I., Wan Iskandar Mirza and M. S. M., Sani (2019) Experimental modal analysis procedure for a laser spot welded hat-plate structure. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfor, 7 March 2019 , Selangor, Malaysia. pp. 1-9., 1262 (012015). ISSN 1742-6588 (print); 1742-6596 (online)

Mohamad Syazwan Hanif, Abd Latif (2019) An ergonomic assessment among administrative workers in higher learning institution. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Mohamd Salih, Sinan Qahtan (2019) Nomadic people optimizer (NPO) for large-scale optimization problems. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdulrahman, A. Alsewari).

Mohamed, Hybat Salih and Nour, A. H. and Zaki, Yasmeen Hafiz and Zulkifly, Jemaat and Azhari, H. Nour (2019) Treatment of Palm Oil Mill Effluent (POME) using Membrane Anaerobic System (MAS). In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-12., 702 (012029). ISSN 1757-899X

Mohamed, Mohd Rusllim (2019) Extended Kalman Filter (EKF)-based modular-stack Vanadium Redox Flow Battery (V-RFB) prediction model development for reducing electrode contact resistance and parallelization current. , [Research Report: Research Report] (Unpublished)

Mohamed, Omar Abdelnaby (2019) Strategies for maximizing the effectiveness of virtual teams in the construction industry. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohamed, Shazmin Kithur and Asif, Muhammad and Nazari, Mansoureh Vishkaei and Baharetha, Hussein M. and Mahmood, Syed and Abdul Rashid, M. Yatim and Aman Shah, Abdul Majid and Abdul Majid, Amin Malik Shah (2019) Antiangiogenic activity of sophorolipids extracted from refined bleached deodorized palm olein. Indian Journal of Pharmacology, 51 (1). pp. 45-54. ISSN 0253-7613. (Published)

Mohamed Mokhtarudin, Mohd Jamil and Oumer, Ahmed Nurye and Adib, M. A.H.M. and Jalıl, Muhammad Hilmi and Einly, Lim and Ahmad Hafiz, Zulkifly (2019) Development of brain tissue swelling predictive tools for ischaemic stroke patient post-treatment. , [Research Report: Research Report] (Unpublished)

Mohamed Saiful, Firdaus Hussin and Halyani, Mohd. Yassim and Nursabillilah, Mohd. Ali and Muhammad Ashraf, Fauzi and Zulkefli, Ismail and Fatin Farhana, Rosli (2019) Conceptual design approach and ergonomics analysis of fire resistant purpose shield. ARPN Journal of Engineering and Applied Sciences, 14 (6). pp. 1264-1268. ISSN 1819-6608. (Published)

Mohamed Salleh, Mohamed Saheed and Norani, Muti Mohamed and Balbir Singh, Mahinder Singh and Rajan, Jose (2019) Surface plasmon assisted electron–hole migration for high photocurrent density generation in a perovskite solar cell. ACS Applied Energy Materials, 2 (12). pp. 8707-8714. ISSN 2574-0962. (Published)

Mohammad, Aslam and Kumar, Senthil and Sorooshian, Shahryar (2019) Impact of microfinance on poverty: qualitative analysis for Grameen Bank borrowers. International Journal of Financial Research, 11 (1). pp. 49-59. ISSN 1923-4023 (print); 1923-4031 (online). (Published)

Mohammad, Aslam and Senthil Kumar, T. and Shahryar, Sorooshian (2019) Social Versus Financial Performance of Microfinance: Bangladesh Perspective. Research in World Economy, 10 (3). pp. 263-272. ISSN 1923-3981. (Published)

Mohammad, Aslam and T., Senthil Kumar and Sorooshian, Shahryar (2019) Computation of multidimensional poverty index: a case study. International Journal of Emerging Trends in Engineering Research, 7 (9). pp. 262-267. ISSN 2347-3983. (Published)

Mohammad, Mahgoub Kamel Mahmoud and Mandour, Seham and Nik Aloesnita, Nik Mohd Alwi (2019) The impact of task complexity on EFL learners' writing production across gender. In: 2nd Language and Communication Postgraduate International Seminar Proceedings, 2 July 2019 , UTM Skudai, Johor. . ISBN 9789672171737

Mohammad, Mahgoub Kamel Mahmoud and Nik Aloesnita, Nik Mohd Alwi (2019) The impact of task complexity on EFL learners' writing production across gender. International Journal of Engineering and Advanced Technology, 8 (5). pp. 1218-1220. ISSN 2249-8958. (Published)

Mohammad Affendy, Omardin (2019) Mengarus perdana progam TVET aras tinggi transformasi minda berkemahiran tinggi. UMP News . (Unpublished)

Mohammad Affendy, Omardin (2019) Sijil Perakuan Bomba jaminan keselamatan bangunan beroperasi. Create (15). (Unpublished)

Mohammad Amin, Mahmood (2019) Effect of processed spent bleaching earth and kenaf fibre on compressive strength and drying shrinkage of foamed concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohammad Farhan, Nadzri (2019) Personnel selection criteria for emergency response team based on fire safety awareness for an organization. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Mohammad Fazle, Rabbi and Nurul Wahidah, Arshad and Kamarul Hawari, Ghazali and Sikandar,, Tasriva and Rohana, Abdul Karim and M. Z., Ibrahim (2019) EMG activity of leg muscles with knee pain during islamic prayer (Salat). In: 15th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2019, 8 - 9 March 2019 , Pulau Pinang. pp. 213-216.. ISBN 978-153867563-2

Mohammad Fazriel, Zaidi (2019) Numerical analysis of blast pressure parameters on RC wall with circle opening. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohammad Hakimi, Kamarudin (2019) Program empower Community Dekati Masyarakat Orang Asli Kampung Simpai. UMP News . (Unpublished)

Mohammad Hakimi, Kamarudin (2019) Sinergi UMP dan MRSM terhadap intelektual dan potensi pelajar. UMP News . (Unpublished)

Mohammad Hakimi, Kamarudin (2019) Synergy between UMP and MRSM have positive impact on intellectual and potential development of students. UMP News . (Unpublished)

Mohammad Hakimi, Kamarudin (2019) UMP prihatin salur bantuan kepada keluarga warga. UMP News . (Unpublished)

Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Bachtiar, Dandi and M. R. M., Rejab and Cionita, Tezara (2019) Mechanical properties of mengkuang leave fibre reinforced low density polyethylene composites. In: Natural Fibre Reinforced Vinyl Ester and Vinyl Polymer Composites: Development, Characterization and Applications. Woodhead Publishing Series, 6 (2018). Woodhead Publishing Series, Sawston‎, ‎Cambridge, pp. 181-196. (Unpublished)

Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Tezara, Cionita and Jamiluddin, Jaafar and Efriyohadi, Agung and Ramli, Junid and Ahmad, Kholil (2019) Water absorption behaviour on the mechanical properties of woven hybrid reinforced polyester composites. The International Journal of Advanced Manufacturing Technology, 104 (1 - 4). pp. 1075-1086. ISSN 0268-3768 (Print); 1433-3015 (Online). (Published)

Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Thomas, Sabu and Jacob, Maya John and Jamiluddin, Jaafar and Tezara, Cionita (2019) Mechanical performance of hybrid woven jute-roselle-reinforced polyester composites. Polymers and Polymer Composites, 27 (7). pp. 407-418. ISSN 0967-3911. (Published)

Mohammad Iqwhanus Syaffa, Amir (2019) An artificial neural network approach for classification and prediction of low pressure chemical vapor deposition SixNy ISFET pH sensor drift. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Othman, Md. Rizal).

Mohammad Musab, Azmat Ali and Melor, Md Yunus and Harwati, Hashim and Azwin Arif, Abdul Rahim and Nor Yazi, Khamis (2019) Strategic development of flipped framework on educators and learning constructs for ESL context: the experts’ agreement. Journal of Academic Research in Business and Social Sciences, 9 (3). pp. 1414-1422. ISSN 2222-6990. (Published)

Mohammad Norazmi, Ahmad and Nor Aini, Mat Noh and Erna Normaya, Abdullah and Mohd Ambar, Yarmo and Mohd Bijarimi, Mat Piah and Ku Halim, Ku Bulat (2019) Optimization of a protease extraction using a statistical approach for the production of an alternative meat tenderizer from Spondias cytherea roots. Journal of Food Processing and Preservation, 43 (11). pp. 1-14. ISSN Print (1745-4549); online (0145-8892). (Published)

Mohammad Syafi Azim, Mohd Razam (2019) Smart home security. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohammed, Ibrahim Awad (2019) Isolation of cardamonin, pinostrobin chalcone from the rhizomes of Boesenbergia rotunda and their cytotoxic effects againts colon cancer HT29 and breast cancer MDA-MB-231 cell lines. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohammed Nadeem, Akhtar).

Mohammed, Khudair Abbas (2019) Generic nodal abstraction for enhancing human-agent collaborative model with an integrated security and trust aspects. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed, Khudhair Abbas and Mazlina, Abdul Majid and Mohd Sharifuddin, Ahmad (2019) Conceptual design of a generic nodal abstraction (GNA) for a human-agent collaboration systems. In: IOP Conference Series: Materials Science and Engineering, Joint Conference on Green Engineering Technology & Applied Computing 2019, 4-5 February 2019 , Bangkok, Thailand. pp. 1-5., 551 (012043). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohammed, Marwah Noori (2019) Synthesis and characterization of thermoresponsive poly (N-vinylcaprolactam) / fillers nanocomposite. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed, Mostafa Abdulghfoor and Hasan, Raed Abdulkareem and Ahmed, Munef Abdullah and Tapus, Nicolae and Shnan, Marwan Ali and Khaleel, M. K. and Ali, Ahmed H. (2019) A Focal load balancer based algorithm for task assignment in cloud environment. In: IEEE 10th International Conference on Electronics, Computers and Artificial Intelligence (ECAI 2018), 28-30 June 2018 , Iasi, Romania. pp. 1-6.. ISBN 978-1-5386-4901-5

Mohammed Abdirashid, Abdulkadir (2019) Investigation of brick using clay and fly ASH. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohammed Adam Ibrahim, Fakharaldien and Khalid, Adam and Noor Akma, Abu Bakar and Mazlina, Abdul Majid (2019) Weather data analysis using hadoop : Applications and challenges. In: IOP Conference Series: Materials Science and Engineering, Joint Conference on Green Engineering Technology & Applied Computing 2019, 4-5 February 2019 , Bangkok, Thailand. pp. 1-6., 551 (012044). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohammed Al-Fakih, Kamal Ahmed (2019) Investigating the effects of high temperature on the performance of structural steel connections using FE analysis. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammed Falih, Badran and Kohbalan, Moorthy and Nor Saradatul Akmar, Zulkifli and Mohd Saberi, Mohamad and Safaai, Deris and Nan, Md. Sahar (2019) Propose a new Firefly-Fast Learning Network model based Intrusion-Detection System. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12S2). pp. 146-152. ISSN 2278-3075. (Published)

Mohammed Hesham Ali, Hammam (2019) Effects of specimen size and shape on compressive strength of foamed concrete containing spent bleaching earth and kenaf fiber. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohammed Nasser Al-Hokabi, Abdulmajeed Ali (2019) Study of the mechanical properties of bottom ash as a partial sand replacement in a non-load bearing fly ash bricks. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohammed Rashid, Ali and Abdulla, Firdos M. and Noor Asma Fazli, Abdul Samad (2019) Molecular Spectroscopy Characterization of Binary Liquid Mixtures Using Attenuated Total Reflectance Fourier Transforms Infrared Approach. International Journal of Advanced Research, 7 (3). pp. 1004-1009. ISSN 2320-5407. (Published)

Mohammed Saedi, Jami and Mani Malam, Ahmad and Olalere, Olusegun Abayomi and Mohammed, Ngabura (2019) Elemental and chemical composition of moringa oleifera husk extracts. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 5 (5). pp. 74-78. ISSN 0126-8139. (Published)

Mohd Aizat Ahlam, Mohamad Mokhtar and Nur Syahidah, Yusoff and Chuan, Zun Liang (2019) Robust hotelling’s T2 statistic based on M-estimator. In: 2nd International Conference on Applied & Industrial Mathematics and Statistics (ICOAIMS 2019), 23-25 July 2019 , Kuantan, Pahang. pp. 1-6.. (Unpublished)

Mohd Aizat Herman, Mohd Rosdi (2019) Experimental study of cold-formed steel columns with openings. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Aizudin, Abd Aziz and Khairuddin, Md Isa and Miles, N. J. and Radzuwan, Ab Rashid (2019) Pneumatic jig: effect of airflow, time and pulse rates on solid particle separation. International Journal of Environmental Science and Technology, 16 (1). pp. 11-22. ISSN 1735-1472(Print); 1735-2630(Online). (Published)

Mohd Akmal, Azhar and Dr. Mimi Sakinah, Abdul Munaim (2019) Isolation and Molecular Identification of Potential Probiotic Yeast Strains Found in Malaysian Kefir Drinks Samples. International Journal of Pharma Medicine and Biological Sciences, 8 (4). pp. 128-131. ISSN 2278-5221. (Published)

Mohd Akmal, Azhar and Mimi Sakinah, A. M. (2019) Identification and Evaluation of Probiotic Potential in Yeast Strains Found in Kefir Drink Samples from Malaysia. International Journal of Food Engineering, 15 (7). pp. 128-131. ISSN 1556-3758. (Published)

Mohd Amir Izuddin, Mohamad Ghazali and Zuraina, Ali and Anita, Abdul Rani (2019) Treating the addicted: Cure and care service center (CCSC) in the East Coast of Malaysia. International Journal of Humanities Technology and Civilization (IJHTC), 2 (7). pp. 1-12. ISSN 2289-7216. (Published)

Mohd Amir Shahlan, Mohd Aspar and Raihana Z., Edros and Norul A., Hamzah (2019) Antibacterial Properties of Kelulut, Tualang and Acacia Honey against Wound-Infecting Bacteria. Pertanika Journal of Tropical Agricultural Science, 42 (4). pp. 1185-1208. ISSN 1511-3701 (Print); 2231-8542 (Online). (Published)

Mohd Amirul Amzar, Mohd Talib (2019) Application block word for android user. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Amirul Asyraf, Ahmad and Chin, Sim Yee and Sumaiya, Zainal Abidin (2019) Kinetic Studies of the Esterification of Acrylic Acid with 2-Ethyl Hexanol Catalysed by Diaion Resins. Journal of Chemical Engineering of Japan, 52 (4). 342 -348. ISSN 0021-9592. (Published)

Mohd Amirul Hakim, Sidek and R. M., Yunus and Ahmad Khan, Mohamad Al-Nizar Khan and Islam, Muhammad Remanul (2019) Industrial operation feasibility for red gypsum-based brick manufacturing. Asian Journal of Applied Sciences, 7 (4). pp. 1-23. ISSN 2321-0893. (Published)

Mohd Amirul Hakim, Sidek and R. M., Yunus and Ahmad Khan, Mohamad Al-Nizar Khan and Islam, Muhammad Remanul (2019) Optimization of processing parameters of red gypsum-based brick manufacturing using response surface methodology. Asian Journal of Applied Sciences, 7 (4). pp. 505-512. ISSN 2321-0893. (Published)

Mohd Amirulmukmin, Abdullah and Muhammad Suhaimi, Man and Phang, Sook Nyan and Syed Mohd Saufi, Tuan Chik and Syamsul Bahari, Abdullah (2019) Potential thermo-responsive ionic liquid as draw solution in forward osmosis application. Journal of Engineering Science and Technology, 14 (2). 1031 -1042. ISSN 1823-4690. (Published)

Mohd Anwar, Zawawi (2019) Optical fiber sensor for health monitoring application. , [Research Report: Research Report] (Unpublished)

Mohd Arfian, Ismail and Mezhuyev, Vitaliy and Irfan, Darmawan and Shahreen, Kasim and Mohd Saberi, Mohamad and Ashraf Osman, Ibrahim (2019) Optimization of biochemical systems production using combination of newton method and particle swarm optimization. International Journal on Advanced Science, Engineering and Information Technology, 9 (3). pp. 753-758. ISSN 2088-5334. (Published)

Mohd Aufa Hadi, Putera Zaini and Aiman, Mohd Halil and Mohd Mawardi, Saari and Tsukada, Keiji and Nurul A’in, Nadzri (2019) An MFL probe using shiftable magnetization angle for front and back side crack evaluation. In: 15th IEEE Colloquium on Signal Processing and its Applications (CSPA 2019), 8-9 March 2019 , Penang, Malaysia. pp. 1-5.. ISBN 978-153867563-2

Mohd Azam, Muhamad Akhir (2019) 128 Pegawai Kadet PALAPES UMP Terima Pentauliahan Leftenan Muda. UMP News .

Mohd Azam, Muhamad Akhir (2019) Student Activities 128 UMP Reserve Officers Training Unit (PALAPES) cadet officers commissioned as second. UMP News .

Mohd Azam, Muhamad Akhir and Mohammad Hakimi, Kamarudin (2019) Eksesais Leopard uji daya tahan PALAPES UMP. UMP News . (Unpublished)

Mohd Azlan, Zulkarnain and Mohamad Khadri, Shahriman and Ahmmad Shukrie, Md Yudin (2019) Drying characteristics of cocoa bean in a swirling fluidized bed dryer: an experimental study. In: UTP-UMP-UAF Symposium on energy system 2019 (SES2019), 1-2 Oct. 2019 , UMP Library. pp. 1-10.. (Unpublished)

Mohd Azraai, Mohd Razman (2019) Hunger behaviour classification of Lates Calcarifer using machine learning for automatic demand feeder through image processing. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azraai, Mohd Razman and Susto, Gian Antonio and Cenedese, Angelo and Anwar, P. P. Abdul Majeed and Musa, Rabiu Muazu and Ahmad Shahrizan, Abdul Ghani and Faeiz Azizi, Adnan and Khairul Muttaqin, Ismail and Zahari, Taha and Mukai, Yukinori (2019) Hunger classification of Lates calcarifer by means of an automated feeder and image processing. Computers and Electronics in Agriculture, 163. pp. 1-8. ISSN 0168-1699. (Published)

Mohd Azrul Hisham, Mohd Adib and Khairul Shah, Affendy Yakof and Zulfikar, Anuar and Nizam, Abdullah and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2019) The cardio vascular simulator (CardioVASS) device on monitoring the physiology of blood flow circulation via angiographic image for medical trainee. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 103-111. ISSN 2289-7879. (Published)

Mohd Azrul Hisham, Mohd Adib and Mohammad Asyrul, Abd Rashid and Nur Hazreen, Mohd Hasni (2019) Development of smart infant-wrap (InfaWrap) device for neonates. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019, 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 186-187.. ISBN 978-967-2145-65-3 (online)

Mohd Azrul Hisham, Mohd Adib and Mohd Hanafi, Abdul Rahim and Nur Hazreen, Mohd Hasni (2019) Development of bilirubin jaundice (BiliDice) device for neonates. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019, 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 188-189.. ISBN 978-967-2145-65-3 (online)

Mohd Azrul Hisham, Mohd Adib and Muhamad Hazim, Khalili and Nur Hazreen, Mohd Hasni (2019) Development of Brady-Tachy heart automotive monitoring (BT-Heartomotive) device to prevent motor-vehicle accident. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019, 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 118-119.. ISBN 978-967-2145-65-3 (online)

Mohd Azrul Hisham, Mohd Adib and Muhammad Irfan, Abdul Jalal and Nur Hazreen, Mohd Hasni (2019) Improvement of the BT-heartomotive device for avert car accident using MY Brady Tachy Heart mobile application. In: 6th International Conference on Bioinformatics Research and Applications (ICBRA 2019), 19-21 December 2019 , Seoul National University, Seoul, South Korea. pp. 1-5.. (Unpublished)

Mohd Azrul Hisham, Mohd Adib and Muhammad Shahminan, Lukman and Nur Hazreen, Mohd Hasni (2019) Development of an integrated vaccine system (IVS) for vaccination healthcare database. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019, 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 155-156.. ISBN 978-967-2145-65-3 (online)

Mohd Azrul Hisham, Mohd Adib and Nur Hazreen, Mohd Hasni and Muhamad Zuhairi, Sulaiman (2019) HPV Game: Alleviates Vaccine Hesitancy Among High School Students Through Edutainment Gaming. In: Proceedings Of The International University Carnival On E-Learning (IUCEL) 2019, 21-22 August 2019 , DeTAR Putra, Universiti Malaysia Sarawak,Kota Samarahan, Sarawak, Malaysia. pp. 212-213.. ISBN 978-967-2298-08-3

Mohd Azuri, Shaari and Hasmadi, Hassan (2019) Keberkesanan Bimbingan School Improvement Partners+ (SIPartners+): Tahap Penerimaan KS Terhadap SIPartners+ yang Membimbing Mereka Di Pantai Timur Malaysia. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 119-125.. ISBN 978-967-17268-1-5

Mohd Azuri, Shaari and Hasmadi, Hassan (2019) Tahap penerimaan kepimpinan sekolah terhadap school improvement ipartners+ yang membimbing mereka di negeri Pahang, Terengganu dan Kelantan. International Journal of Humanities Technology and Civilization (IJHTC), 1 (6). pp. 18-24. ISSN 2289-7216. (Published)

Mohd Bijarimi, Mat Piah and Francisco, Vinoth and Mohammad Norazmi, Ahmad and Erna, Normaya and Sazmal Effendi, Arshad and Waleed Ali Murshed Hasan, Alhadadi (2019) Mechanical properties of poly(lactic acid) compounded with recycled tyre waste/graphene nanoplatelets nanocomposite. In: Materials Today: Proceedings; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020, 9 - 11 August 2020 , Kuala Lumpur. pp. 265-269., 42 (1). ISSN 2214-7853

Mohd F. F., Mohd Aluwi and Rullah, Kamal and Koeberle, Andreas and Werz, Oliver and Nur Sakinah, Abdul Razak and Wei, Leong Sze and Fatimah, Salim and Nor Hadiani, Ismail and Ibrahim, Jantan and Wai, Lam K. (2019) Design and synthesis of a novel mPGES-1 lead inhibitor guided by 3D-QSAR CoMFA. Journal of Molecular Structure, 1196. pp. 844-850. ISSN 0022-2860. (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak (2019) L-statistical analysis of sound signal acquired from pulse mode laser welding for characterising weld geometry. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6987-7006. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Fahmi, Othman and Abdul Adam, Abdullah and Syuhaida, Asri and Zulkifli, Azmi and Mohd Hafizil, Mat Yasin and Zuhaira, Abdullah and R., Mamat (2019) A comparative study on performance characteristics of diesel engine fuelled by biodiesel blends with and without Ge-132 additive. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012122). ISSN 1757-899X

Mohd Fahmi, Othman and Nurul Syuhaida, Mohd Asri and Abdul Adam, Abdullah and Mohd Kamal, Kamaruzzaman (2019) Performance and emission characteristics of single cylinder diesel engine fueled with organic germanium. In: 3rd International Conference On The Sustainable Energy And Environment Development (SEED2019), 15 - 24 Oct. 2019 , Krakow, Poland. pp. 1-24.. (Unpublished)

Mohd Faisal, Farhan and Nor Sakinah, Abdul Shukor and Mohd Ashraf, Ahmad and Mohd Helmi, Suid and Mohd Riduwan, Ghazali and Mohd Falfazli, Mat Jusof (2019) A simplify fuzzy logic controller design based safe experimentation dynamics for pantograph-catenary system. Indonesian Journal of Electrical Engineering and Computer Science, 14 (2). pp. 903-911. ISSN 2502-4752. (Published)

Mohd Faizal, Ab Razak and Nor Badrul, Anuar and Rosli, Salleh and Ahmad, Firdaus and Muhammad, Faiz and Alamri, Hammoudeh S. (2019) “Less Give More”: Evaluate and zoning Android applications. Measurement, 133. pp. 396-411. ISSN 0263-2241. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Comparison of bone temperature elevation in drilling of human, bovine and porcine bone. In: 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, 13-14 June 2019 , Sheffield; United Kingdom. pp. 411-414., 82. ISSN 2212-8271

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Drilling of bone: Effect of drill bit geometries on thermal osteonecrosis risk regions. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233 (2). pp. 207-218. ISSN 0954-4119. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Drilling of bone: thermal osteonecrosis regions induced by drilling parameters. Biomedical Physics & Engineering Express, 5 (6). 065003-1. ISSN 2057-1976. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Multi-objective optimization of surgical drill bit to minimize thermal damage in bone-drilling. Applied Thermal Engineering, 157. pp. 113583-113594. ISSN 1359-4311. (Published)

Mohd Faizal, Zulkeffali (2019) Car health monitoring system using Arduino. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Faizul Farhan, Ahmad Hamidi and W. S., Wan Harun and Nur Zalikha, Khalil and Samykano, Mahendran (2019) Microstructural comparison and mechanical properties of stainless steel 316L fabricated by selective laser melting and metal injection moulding processes. International Journal of Manufacturing Technology and Management, 33 (1/2). pp. 76-87. ISSN 1368-2148. (Published)

Mohd Falfazli, Mat Jusof and Nurul Amira, Mhd Rizal and Ahmad Azwan, Abdul Razak and Shuhairie, Mohammad and Ahmad Nor Kasruddin, Nasir (2019) Exponentially adaptive sine-cosine algorithm for global optimization. In: 9th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2019, 27-28 April 2019 , Kota Kinabalu. 6 -10. (8743786). ISBN 978-1-5386-8546-4

Mohd Falfazli, Mat Jusof and Shuhairie, Mohammad and Ahmad Azwan, Abd Razak and Ahmad Nor Kasruddin, Nasir and Mohd Riduwan, Ghazali and Mohd Ashraf, Ahmad and Addie Irawan, Hashim (2019) A Kalman-Filter-Based Sine-Cosine Algorithm. In: 2018 IEEE International Conference On Automatic Control And Intelligent Systems (I2CACIS2018), 20 Oktober 2018 , Shah Alam, Selangor, Malaysia. pp. 137-141.. ISBN 978-1-5386-5654-9

Mohd Farid, Md Ali (2019) Pasukan bola sepak UMP timba pengalaman di Kunming China. UMP News . (Unpublished)

Mohd Farid, Zainudin and R. A., Bakar and K., Kadirgama (2019) Effects of phase angle setting, displacement, and eccentricity ratio based on determination of rhombic-drive primary geometrical parameters in beta-configuration Stirling engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012047). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Farid, Zainudin and R. M., Faiz and R. A., Bakar and K., Kadirgama (2019) Thermodynamic performance prediction of rhombic-drive beta-configuration Stirling engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012048). ISSN 1757-8981 (Print); 1757-899X (Online)

Mohd Fauzi, Mohamad Yusof and Abu Zaharin, Ahmad (2019) Enrollment Issue, Power Energy Management Approach and Structure of Control of Renewable Energy Microgrid: A Review. International Journal of Engineering Technology And Sciences (IJETS), 6 (2). pp. 12-27. ISSN 2289-697X. (Published)

Mohd Fauzi, Mohamad Yusof and Abu Zaharin, Ahmad (2019) Enrollment Issue, Power Energy Management Approach and Structure of Control of Renewable Energy Microgrid: A Review. International Journal of Engineering Technology And Sciences (IJETS), 6 (2). pp. 12-27. ISSN 2289-697X. (Published)

Mohd Ferdaus, Musa (2019) Chairman of Board of Directors visits UMP laboratory facilities. UMP News . (Unpublished)

Mohd Ferdaus, Musa (2019) Jelajah Desa peluang pemegang biasiswa UMP dekati masyarakat orang asli. UMP News . (Unpublished)

Mohd Ferdaus, Musa (2019) UMP and PERHEBAT to help empower former army personnel. UMP News . (Unpublished)

Mohd Ferdaus, Musa (2019) UMP dan PERHEBAT bantu perkasa bakal pesara tentera. UMP News . (Unpublished)

Mohd Ferdaus, Musa (2019) Up close & personal Humanizing technology with Pahang Natives. UMP News . (Unpublished)

Mohd Ghazali, Maarof and Nawanir, Gusman and Muhammad Fakhrul, Yusuf (2019) Learning factory concept and development at Faculty of Industrial Management, Universiti Malaysia Pahang. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 627-636., 2019. ISSN 2518-668X

Mohd Hafiz, Ali and Abdul Adam, Abdullah and Mohd Hafizil, Mat Yasin (2019) Effect of BHA and BHT antioxidant additives on engine performance and emission of a CI engine fueled with a palm oil methyl ester-diesel fuel blend. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018, 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10., 2059 (020051). ISBN 978-0-7354-1787-8

Mohd Hafiz, Ali and Mohd Kamal, Kamaruzzaman and Mohd Hafizil, Mat Yasin and Abdul Adam, Abdullah (2019) Cyclic pressure variations in a single-cylinder diesel engine fueled with biodiesel and antioxidant blends. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-2.. (Unpublished)

Mohd Hafizi, Zohari (2019) A study of progressive damage detection in thin-walled composite structures using an embedded fiber Bragg grating – acoustic emission hybrid system. , [Research Report: Research Report] (Unpublished)

Mohd Hafizu, Zakaria (2019) Progressive tool wear in machining biomedical alloy using uncoated and titanium diboride coated tungsten carbide tools. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hanafiah, Ahmad and Nawanir, Gusman and Mohd Rashid, Ab Hamid (2019) Multi-approach formulation in dynamic personality-situation interaction for personnel selection. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 872-891., 2019. ISSN 2518-668X

Mohd Hasnun Ariff, Hassan (2019) Kuliah atas permintaan (on-demand lecture). UMP News .

Mohd Hefzan, Azmi and Muhammad Nubli, Abdul Wahab (2019) Pembangunan model rawatan psikospiritual Islam untuk meningkatkan ciri-ciri kepulihan orang kena pengawasan: satu tinjauan literatur. Jurnal Antidadah Malaysia, 11 (2). pp. 175-192. ISSN 2231-9387. (Published)

Mohd Hefzan, Azmi and Muhammad Nubli, Abdul Wahab (2019) Pembangunan model rawatan psikospiritual untuk meningkatkan ciri kepulihan orang kena pengawasan: Satu tinjauan literatur. International Journal of Humanities Technology and Civilization (IJHTC), 1 (5). pp. 74-88. ISSN 2289-7216. (Published)

Mohd Helmi, Suid and Mohd Zaidi, Mohd Tumari and Mohd Ashraf, Ahmad (2019) A modified sine cosine algorithm for improving wind plant energy production. Indonesian Journal of Electrical Engineering and Computer Science, 16 (1). pp. 101-106. ISSN 2502-4752. (Published)

Mohd Herwan, Sulaiman and Zuriani, Mustaffa and Omar, Aliman (2019) An application of barnacles mating optimizer for solving economic dispatch problems. In: IEEE Jordan International Joint Conference on Electrical Engineering and Information Technology, JEEIT 2019, 9 - 11 April 2019 , Le Royal Amman Hotel, Amman, Jordan. pp. 835-839. (8717377). ISBN 9781538679425

Mohd Ikhmil Fadzrizan, Mohd Hanif and Mohd Helmi, Suid and Mohd Ashraf, Ahmad (2019) A piecewise affine PI controller for buck converter generated DC motor. International Journal of Power Electronics and Drive Systems, 10 (3). pp. 1419-1426. ISSN 2088-8694. (Published)

Mohd Ikhwan, Muhammad Ridzuan and Djokić, Saša Ž (2019) Energy regulator supply restoration time. Energies, 12 (6). pp. 1-16. ISSN 1996-1073. (Published)

Mohd Iskandar, Putra and Addie Irawan, Hashim and Raja Mohd Taufika, Raja Ismail (2019) Fuzzy self-adaptive sliding mode controller for pneumatic cylinder rod-piston motion precision control. In: The 4th International Conference on Engineering Technology 2019 (ICET 2019), 6-7 July 2019 , TATI University of College, Terengganu. pp. 1-7.. (Unpublished)

Mohd Iskandar Putra, Azahar and Addie Irawan, Hashim and Raja Mohd Taufika, Raja Ismail (2019) Fuzzy Self-Adaptive PID for Pneumatic Piston Rod Motion Control. In: IEEE 10th Control and System Graduate Research Colloquium (ICSGRC 2019), 2-3 August 2019 , Shah Alam, Malaysia, Malaysia. pp. 82-87.. ISBN 978-1-7281-0755-4

Mohd Iskandar Putra, Azahar and Addie Irawan, Hashim and Raja Mohd Taufika, Raja Ismail (2019) Fuzzy self-adaptive PID for pneumatic rod piston motion control. In: 10th IEEE Control & System Graduate Research Colloquium 2019 (ICSGRC 2019), 2-3 August 2019 , Shah Alam, Malaysia, Malaysia. pp. 82-87.. ISBN 978-1-7281-0755-4

Mohd Iskandar Putra, Azahar and Addie Irawan, Hashim and Raja Mohd Taufika, Raja Ismail (2019) Position control of pneumatic actuator using cascade fuzzy self-adaptive PID. In: 5th International Conference on Electrical, Control and Computer Engineering (INECCE 2019), 29-30 July 2019 , Swiss Garden Kuantan. pp. 1-10.. (Unpublished)

Mohd Iszuani, Mohd Hassan (2019) A Visit to Japan Foundation Kuala Lumpur. CMLHS News . (Unpublished)

Mohd Izzat Syahmi, Saiful Azman (2019) Android-based car parking monitoring system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Jamil, A. W. and Faridah, A. A. and Nor Marzuina, F. K. N. and Zafirah, Z. F. (2019) Accuracy of conventional computations in assessing volume of small diameter logs of hopea odorata. Journal of Tropical Forest Science, 31 (1). pp. 125-133. ISSN 0128-1283. (Published)

Mohd Jamil Mohamed, Mokhtarudin and Aina Najwa, Nadzri and Stephen, Payne (2019) Finite element poroelastic modelling of brain oedema formation after ischaemic stroke reperfusion. In: 6th International Conference on Computational and Mathematical Biomedical Engineering (CMBE 2019), 10-12 June 2019 , Japan. pp. 1-4..

Mohd Jamil Mohamed, Mokhtarudin and Shabudin, Abbas and Payne, Stephen J. (2019) Effects of Brain Tissue Mechanical and Fluid Transport Properties during Ischaemic Brain Oedema: A Poroelastic Finite Element Analysis. In: IEEE-EMBS Conference on Biomedical Engineering And Sciences (IECBES 2018), 3-6 December 2018 , Borneo Convention Centre Kuching, Sarawak, Malaysia. pp. 1-6.. ISBN 978-1-5386-2471-5

Mohd Jim, Hamzah (2019) Hipnosis: Penyembuhan atau pencerobohan akal. Buletin Penyelidikan, 42. pp. 12-14. ISSN 2232-1853. (Published)

Mohd Jim, Hamzah and Syed Ismail, Syed Mustapa and Ahmad Subki, Miskon and Edaham, Ismail (2019) Kesedaran terhadap fenomena histeria dari perspektif siswa guru Institut Pendidikan Guru Kampus Ilmu Khas. IISIATIF #112:Pembudayaan Penyelidikan Dalam Kalangan Pensyarah, 3 (112). pp. 97-111. ISSN ISBN: 978-967-5580-17-8. (Published)

Mohd Kamal, Kamaruzzaman and Abdul Adam, Abdullah and R., Mamat (2019) Combustion, performances, and emissions characteristics of Hermetia illucens larvae oil in a direct injection compression ignition engine. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41 (12). pp. 1483-1496. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Mohd Kamal, Kamaruzzaman and Hafiz, M. and Abdullah, Adam and Ang, F. Chen and Awad, Omar I. (2019) Combustion, performances and emissions characteristics of black soldier fly larvae oil and diesel blends in compression ignition engine. Renewable Energy, 142. pp. 569-580. ISSN 0960-1481. (Published)

Mohd Khaidi, Sarah and Abu, Noratikah and Muhammad, Noryanti (2019) Tourism demand forecasting – a review on the variables and models. In: Journal of Physics: Conference Series; 2nd International Conference on Applied and Industrial Mathematics and Statistics 2019, ICoAIMS 2019, 23 - 25 July 2019 , The Zenith Hotel, Kuantan, Pahang. pp. 1-8., 1366 (012111). ISSN 1742-6588 (print); 1742-6596 (online)

Mohd Khairul Anam, Md Khairudin (2019) Baja kompos sisa kelapa sawit. Berita Harian . p. 50.

Mohd Khairul Anam, Md Khairudin (2019) Masakan Jepun Oden jadi taruhan. Berita Harian . p. 51.

Mohd Khairul Anam, Md Khairudin (2019) Pembelajaran berasaskan pendedahan, pengalaman sebenar. Berita Harian . p. 2. (Unpublished)

Mohd Khairul Bazli, Mohd Aziz and Fadhilah, Yusof and Zulkifli, Yusop and Mohammad Afif, Kasno (2019) Geostatistics and hybrid particle swarm-simulated annealing optimization in rain gauges network simulation. In: The Ninth International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2019), 20-22 November 2019 , Tokyo, Japan. pp. 1-6.. ISBN 978-4-909106025 C3051

Mohd Marzuki, Mohamed (2019) UMP embarks on 6R Campaign for sustainable green campus. UMP News . (Unpublished)

Mohd Marzuki, Mustafa (2019) UMP perkenal 6 R kekal Kampus Lestari. UMP News . (Unpublished)

Mohd Mawardi, Saari and Ahmad Zahir, Irsyad Razak and Mohd Aufa Hadi, Putera Zaini and Nurul A’in, Nadzri and Mohd Razali, Daud and Hamzah, Ahmad (2019) Development of AC and DC Drive coils for magnetic particle imaging system. In: 5th International Conference on Electrical, Control and Computer Engineering (INECCE 2019), 29-30 July 2019 , Swiss Garden Kuantan. pp. 1-11.. (Unpublished)

Mohd Mawardi, Saari and Nazatul Shareena, Suhaimi and Mohd Herwan, Sulaiman and Nurul Akmal, Che Lah and Sakai, Kenji and Kiwa, Toshihiko and Tsukada, Keiji (2019) Influence of viscosity on dynamic magnetization of thermally blocked iron oxide nanoparticles characterized by a sensitive AC magnetometer. Journal of Superconductivity and Novel Magnetism. pp. 1-8. ISSN 1557-1947. (Published)

Mohd Mawardi, Saari and Nurul A’in, Nadzri and A. M., Halil and M., Ishak and Kenji, Sakai and Toshihiko, Kiwa and Keiji, Tsukada (2019) Design of eddy current testing probe for surface defect evaluation. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). 6357- 6367. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Mukhris, Awang and Nur Sa’adatul Afzan, Jusoh (2019) Projek Kilauan Mutiara STARS BPPA-UMP dedah pengalaman kampus. UMP News . (Unpublished)

Mohd Najib, Razali and M. A., Fattah Ahmad and Noor Adilah, Md Salehan and Amira, E. Anuar (2019) Treatment of waste emulsion using coagulation method. In: IOP Conference Series: Earth and Environmental Science, 2019 9th International Conference on Future Environment and Energy, 9-11 January 2019 , Osaka, Japan. pp. 1-9., 257 (012016). ISSN 1755-1315

Mohd Nasrullah, Zulkifli and Zularisam, A. W. and Krishnan, Santhana and Mimi Sakinah, A. M. and Singh, Lakhveer and Yap, Wing Fen (2019) High performance electrocoagulation process in treating palm oil mill effluent using high current intensity application. Chinese Journal of Chemical Engineering, 27 (1). pp. 208-217. ISSN 1004-9541. (Published)

Mohd Noor Firdaus, Haron and F. R. M., Romlay (2019) Parametric study of laser engraving process of AISI 304 Stainless Steel by utilizing fiber laser system. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012124).

Mohd Raizalhilmy, Mohd Rais (2019) UMP, SIASUN seal strategic collaboration in robotic and smart services development. UMP News . (Unpublished)

Mohd Raizalhilmy, Mohd Rais (2019) UMP-SIASUN jalin kolaborasi strategik dalam pembangunan robotik dan perkhidmatan pintar. UMP News . (Unpublished)

Mohd Razali, Hanipah and M. Haziq Adham, Rosli and M., Kettner (2019) The tuning of a small four-stroke spark ignition engine for flexible valve timings through numerical approach. In: Engineering Applications of Artificial Intelligence Conference 2018, 3-5 December 2018 , Sutera Harbour Resort, Sabah, Malaysia. pp. 1-10., 255. ISSN 2261-236X

Mohd Razali, Hanipah and Shahin, Mansor and M. R. M., Akramin and A. R., Razali (2019) Design and parametric characterization of flexure bearing as automotive valve spring replacement. Journal of Mechanical Engineering and Sciences (JMES), 13 (1). pp. 4704-4717. ISSN 2231-8380 (online). (Published)

Mohd Ridhwan, Adam and Mohd Hafiz Dzarfan, Othman and Rozaimi, Abu Samah and Mohd Hafiz, Puteh and Azeman, Mustafa and Mukhlis, A. Rahman and Juhana, Jaafar and Ahmad Fauzi, Ismail (2019) Current trends and future prospects of ammonia removal in wastewater: a comprehensive review on adsorptive membrane development. Separation and Purification Technology, 213. pp. 114-132. ISSN 1383-5866. (Published)

Mohd Riduwan, Ghazali and Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail (2019) Adaptive Safe Experimentation Dynamics for Data- Driven Neuroendocrine-PID Control of MIMO Systems. IETE Journal of Research. pp. 1-15. ISSN 0377-2063 (Print); 0974-780X (Online). (In Press / Online First) (In Press / Online First)

Mohd Riduwan, Ghazali and Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail (2019) Data-driven PID control for DC/DC buck-boost converter-inverter-DC motor based on safe experimentation dynamics. In: 2018 IEEE Conference on Systems, Process and Control (ICSPC), 14-15 December 2018 , Melaka, Malaysia. pp. 89-93.. ISBN 978-1-5386-6327-1 (Unpublished)

Mohd Riduwan, Ghazali and Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail (2019) Data-driven neuroendocrine-pid tuning based on safe experimentation dynamics for control of TITO coupled tank system with stochastic input delay. In: The 6th International Conference On Robot Intelligence Technology And Applications (RITA2018), 16 - 18 Disember 2018 , Pullman Lakeside Hotel, Putrajaya. pp. 1-11., 1015. ISBN 978-981-13-7779-2 (Print); 978-981-13-7780-8 (Online)

Mohd Riduwan, Ghazali and Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail and Tokhi, M. O. (2019) An improved neuroendocrine-proportional-integral-derivative controller with sigmoid-based secretion rate for nonlinear multi-input-multi-output crane systems. Journal of Low Frequency Noise, Vibration and Active Control. pp. 1-15. ISSN 1461-3484 (Print), 2048-4046 (Online). (In Press / Online First) (In Press / Online First)

Mohd Ridzuan, Darun and Athinarayanan, R. and Hummel, V. and Von Leipzig, Konrad H. (2019) The learning factory – a new stimulus to enhance international collaboration. Procedia Manufacturing, 31. pp. 290-295. ISSN 2351-9789. (Published)

Mohd Rizauddin, Deraman and Ruwaida, Abdul Rasid and Mohamad Rizza, Othman and Suli, L. N. M. (2019) Co-gasification of coal and empty fruit bunch in an entrained flow gasifier : A process simulation study. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019, 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-13., 702 (012005). ISSN 1757-8981

Mohd Rosli, Hainin and Mohd Ibrahim, M. Y. and Mohd Khairul Idham, Mohd Satar and Nordiana, Mashros and Putra Jaya, Ramadhansyah and Mohamad Idris, Ali and M. H., Wan Ibrahim and M. N., Fadzli (2019) Porosity and permeability properties of Nano black rice hush ash in porous concrete pavement. In: IOP Conference Series: Earth and Environmental Science, National Colloquium on Wind and Earthquake Engineering, 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-7., 244 (012039). ISSN 1755-1315

Mohd Sabri, Mahmud and Sanuri, Ishak and Mohd Najib, Razali and Mohd Aizudin, Abdul Aziz and Musfafikri, Musa (2019) Grease quality issues on middle voltage switchgear: Corrosivity, resistivity, safety and ageing. IIUM Engineering Journal, 20 (1). pp. 216-228. ISSN 2289-7860. (Published)

Mohd Sabri, Mahmud and Sanuri, Ishak and Mohd Najib, Razali and Mohd Aizudin, Abdul Aziz and Musfafikri, Musa (2019) Grease quality issues on middle voltage switchgear: corrosivity resistivity safety and ageing. IIUM Engineering Journal, 20 (1). pp. 216-228. ISSN 1511-788X. (Published)

Mohd Sahril, Mohd Fouzi and M. S. M., Sani and M. F. R., Ishak (2019) Identification dynamic behaviour of disc brake based on finite element model updating approach. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012006). ISSN 1742-6588 (print); 1742-6596 (online)

Mohd Sarifuddin, Othman@Mustafa and M. Nomani, Kabir (2019) An enhanced model to increase awareness on phishing attacks for vocational students. In: IEEE International Conference On Automatic Control And Intelligent Systems (I2CACIS 2019), 29 Jun 2019 , Grand Blue Wave Hotel, Shah Alam, Malaysia. pp. 1-6.. (Unpublished)

Mohd Sarifuddin, Othman@Mustafa and M. Nomani, Kabir and Ernawan, Ferda and Wang, Jing (2019) An Enhanced Model for Increasing Awareness of Vocational Students Against Phishing Attacks. In: 2019 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), 29-29 June 2019 , Selangor, Malaysia. pp. 10-14.. ISBN 978-1-7281-0784-4

Mohd Shah, Ahmad Syahiman and Azri, Idris and Jadin, Mohd Shawal and Mohd Rashid, Muhammad Ikram and Mohd Saifizi, Saidon (2019) Interactive control algorithm based on real-time solar irradiance forecasting model for standalone photovoltaic system. , [Research Report: Research Report] (Unpublished)

Mohd Shahri, Mohd Akhir (2019) UMP bina jaringan antarabangsa dalam Global Classroom. UMP News . (Unpublished)

Mohd Shahridwan, Ramli (2019) Mathematical modelling of wave impact on landward-inclined and seaward-inclined seawalls. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nor Aida Zuraimi, Md Noar).

Mohd Shahrul, Azuar (2019) 20 UMP staff conquered Mount Kinabalu. UMP News . (Unpublished)

Mohd Shahrul, Azuar (2019) Ekspedisi UMP tawan puncak Kinabalu. UMP News . (Unpublished)

Mohd Shaiful Zaidi, Mat Desa and Azman, Hasan and Agus, Arsad and Reza, Arjmandi (2019) Effect of core-shell rubber toughening on mechanical, thermal, and morphological properties of poly (lactic acid)/multiwalled carbon nanotubes nanocomposites. Journal of Applied Polymer Science, 136 (28). pp. 1-7. ISSN 1097-4628. (Published)

Mohd Shaiful Zaidi, Mat Desa and Azman, Hassan and Agus, Arsad and Masleeyati, Yusop (2019) Dynamic mechanical properties and morphology characteristics of rubber-toughened poly (lactic acid). In: 7th Conference on Emerging Energy and Process Technology (CONCEPT 2018, 27 - 28 November 2018 , Thistle Hotel Johor, Malaysia. pp. 1-7., 90 (01001). ISSN 2267-1242

Mohd Sham, Mohamad and Yuhani, Yusof and Ku Muhammad Na’im, Ku Khalif and Mohd Khairul Bazli, Mohd Aziz (2019) Clustering of rainfall data using k-means algorithm. In: The Ninth International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2019), 20-22 November 2019 , Tokyo, Japan. pp. 1-8.. ISBN 978-4-909106025 C3051

Mohd Shariza, Abdullah (2019) Biodata Tengku Abdullah. Utusan Online .

Mohd Shawal, Jadin and Kamil Ashman, Zamridin and Ahmad Syahiman, Mohd Shah (2019) Development of PV module hotspot detector. In: 5th International Conference on Electrical, Control and Computer Engineering (INECCE 2019), 29-30 Julai 2019 , Kuantan, Pahang. pp. 1-10.. (Unpublished)

Mohd Suhardi, Mat Jusoh and Rashidi, Abbas and Wan Suraya, Wan Nik (2019) Pembangunan model latihan spiritual Islam (MLSI) dalam mempertingkatkan kualiti personal dan kebolehpasaran pelajar. International Journal of Humanities Technology and Civilization (IJHTC), 1 (5). pp. 10-22. ISSN 2289-7216. (Published)

Mohd Syafiq, Sharip and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Muhammad Atif, Mohamed Azmi and Farhana, Aziz and Wan Norharyati, Wan Salleh (2019) Current Advancement by Membrane Technology: A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (2). pp. 283-290. ISSN 2289-7879. (Published)

Mohd Syafiq, Sharip and Norazlianie, Sazali and Haziqatulhanis, Ibrahim and Ahmad Shahir, Jamaludin (2019) A Review on Effectiveness of Numerous Technologies by Utilizing Hydrogen. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems, 21-22 August 2019 , Putrajaya, Malaysia. pp. 423-428.. ISBN 978-981-15-0950-6

Mohd Syafiq, Sharip and Norazlianie, Sazali and Mohd Nizar, Mhd Razali and Farhana, Aziz and Mohd Hafiz Dzarfan, Othman (2019) Current advances in membranes for competent hydrogen purification: A short review. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems, 21-22 August 2019 , Putrajaya, Malaysia. pp. 390-395.. ISBN 978-981-15-0950-6

Mohd Syakirin, Ramli and Sian, Seet Meng and Mohd Naharudin, Salim and Hamzah, Ahmad (2019) A fictitious reference iterative tuning method for buck converter-powered DC motor control system. In: 5th International Conference on Electrical, Control and Computer Engineering (INECCE 2019), 29-30 July 2019 , Swiss Garden Kuantan. pp. 1-12.. (Unpublished)

Mohd Tamizi, Mazlan and Khairil Anuar, Ramly and Nur Emilia, Abdullah Harun (2019) Bauxite industries: lesson learn from governance perspective. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1214-1229., 2019. ISSN 2518-668X

Mohd Yazid, Abu and Filzah Lina, Mohd Safeiee and Nik Nurharyantie, Nik Mohd Kamil and Nurul Farahin, Zamrud (2019) Exploring beneficial of Mahalanobis Taguchi Method on production environment. In: The 4th International Conference on Engineering Technology 2019 (ICET 2019), 6-7 July 2019 , TATI University of College, Terengganu. pp. 1-6.. (In Press / Online First)

Mohd Yazid, Abu and Nik Nurharyantie, Nik Mohd Kamil and Nurul Farahin, Zamrud and Filzah Lina, Mohd Safeiee and Muchamad, Oktaviandri (2019) A review on the integration of mahalanobis-taguchi system and time-driven activity-based costing on production environment. In: 4th International Conference on Engineering Technology (ICET 2019), 6-7 July 2019 , DITC, Kemaman, Terengganu. pp. 1-6.. (In Press / Online First)

Mohd Yuhyi, Mohd Tadza and Tengku Hafidatul Husna, Tengku Anuar and Fadzil, Mat Yahaya (2019) Investigation on Electrically Conductive Aggregates as Grounding Compound Produced by Marconite. Civil and Environmental Engineering Reports, 29 (3). pp. 86-96. ISSN 2450-8594. (Published)

Mohd Zaidi, Mohd Tumari and A. Shamsul Rahimi, A. Subki and Mohd Shahrieel, Mohd Aras and Mohammad ‘Afif, Kasno and Mohd Ashraf, Ahmad and Mohd Helmi, Suid (2019) H-infinity controller with graphical LMI region profile for liquid slosh suppression. TELKOMNIKA (Telecommunication Computing Electronics and Control), 17 (5). pp. 2636-2642. ISSN 1693-6930. (Published)

Mohd Zaidi, Mohd Tumari and Amar Faiz, Zainal Abidin and A Shamsul Rahimi, A Subki and Ab Wafi, Ab Aziz and Mohd Ashraf, Ahmad and Mohd Riduwan, Ghazali (2019) PSO fined-tuned model-free PID controller with derivative filter for buck-converter driven DC motor. International Journal of Recent Technology and Engineering, 8 (3S). pp. 1-5. ISSN 2277-3878. (Published)

Mohd Zaidi, Mohd Tumari and Amar Faiz, Zainal Abidin and Mohamed Saiful, Firdaus Hussin and Ahmad Muzaffar, Abd Kadir and Mohd Shahrieel, Mohd Aras and Mohd Ashraf, Ahmad (2019) PSO fine-tuned model-free PID controller with derivative filter for depth control of hovering autonomous underwater vehicle. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018, 27-28 September 2018 , Universiti Malaysia Pahang. pp. 3-13., 538. ISBN 978-981-13-3708-6

Mohd Zaki, Ahmad (2019) Pentadbir Universiti- melestari kepimpinan, memandang masa hadapan. UMP News . (Unpublished)

Mohd Zaki, Ahmad and Mohd Raizalhilmy, Mohd Rais (2019) Pupuk semangat kesukarelawanan mahasiswa UMP. UMP News . (Unpublished)

Mohd Zamani, Mohd Nor Peah (2019) Analisis kaedah pembuatan, jasad dan nilai estetika tembikar terenang di Pahang. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Wahab, Muhammad Nubli).

Mohd Zamani, Nor Peah and Muhammad Nubli, Abdul Wahab and Hamdzun, Haron (2019) Keindahan Tembikar Tradisional Terenang Warisan Negeri Pahang. Jurnal Jelai, 12 (1). pp. 1-19. ISSN 2229-9580. (Published)

Mohd Zamani, Nor Peah and Muhammad Nubli, Abdul Wahab and Zahirah, Harun (2019) Terenang: Khazanah Tembikar Pahang. In: Seminar Sejarah, Budaya Dan Pembangunan Negeri Pahang, 5 January 2019 , Perpustakaan Awam Daerah Bentong. pp. 1-21..

Mohd Zamri, Osman and Mohd Aizaini, Maarof and Mohd Foad, Rohani and Nilam Nur Amir, Sjarif and Nor Saradatul Akmar, Zulkifli (2019) A multi-color based features from facial images for automatic ethnicity identification model. In: International Conference on Electrical and Electronic Engineering (ICON3E2019), 24-25 June 2019 , Putrajaya, Malaysia. pp. 1-8.. (Unpublished)

Mohd Zulkifli, Mohamad Noor and Chin, I. L. Y and Irawan, S. (2019) Study of the transportation behavior of nanoparticles through low‑porosity sand pack in the absence and presence of oil. Journal of Petroleum Exploration and Production Technology. pp. 1-7. ISSN 2190-0558 (print), 2190-0566 (online). (In Press / Online First) (In Press / Online First)

Mohd Zulkifli, Mohamad Noor and Mohamad Anas, Mohd Azmi and Mohd Shaiful Zaidi, Mat Desa and Mohd Bijarimi, Mat Piah and Azizan, Ramli (2019) The thermal properties of polyurethane/neoprene blends on prosthetic foot. In: The 4th International Conference on Materials Technology and Applications (ICMTA 2019), 9-16 October 2019 , TKP GardenCity Kyoto, Japan. pp. 1-8.. (Unpublished)

Mohd Zulkifli, Mohamad Noor and Siti Nur, Syafinaz and Sonny, Irawan (2019) The study of coated nanoparticles injection in detection of hydrocarbon production. In: Energy Security And Chemical Engineering Congress (ESCHE) 2019, 17-19 Julai 2019 , Parkroyal Resort, Penang, Malaysia. pp. 1-21.. (Unpublished)

Mohd Zulkifli, Mohamad Noor and Wong, Yi Teng and Sonny, Irawan (2019) Stabilization of silicone dioxide nanoparticle foam in tertiary petroleum production. Indonesian Journal of Chemistry, 19 (4). pp. 985-992. ISSN 1411-9420 (Print); 2460-1578 (Online). (Published)

Mohd. Herzwan, Hamzah and Azri, Alias and R., Mamat and Abdul Adam, Abdullah and Sudrajad, Agung and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2019) Performance analysis of diesel engine running with tyre-derived fuel. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012107). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd. Yamani Idna, Idris and Nor Bakiah, Abd. Warif and Hamzah, Arof and Noorzaily, Mohamed Noor and Ainuddin Wahid, Abdul Wahab and Zaidi, Razak (2019) Accelerating FPGA-surf feature detection module by memory access reduction. Malaysian Journal of Computer Science, 32 (1). pp. 47-61. ISSN 0127-9084. (Published)

Mok, Ren Hao (2019) Model-free wind farm power production optimization using multi-resolution optimized relative step size random search. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ashraf, Ahmad).

Mona Alis, Md Yasser and Zaidi, Embong and Erween, Abd Rahim and Amiril Sahab, Abdul Sani and Kamaruddin, Kamdani (2019) Study of Ionic Liquids (AIL and PIL) Viscosity and its Functional Groups under Heat Treatment on Cutting Tool Surface Using Fourier- Transform Infrared Spectroscopy (FTIR). Materials Science Forum, 981. pp. 98-103. ISSN 1662-9752. (Published)

Monir, Md. Minhaj Uddin (2019) Bioethanol production from CO-gasification of lignocellulosic biomass and charcoal. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abd Aziz, Azrina).

Monireh, Kouhi and Mohammadhossein, Fathi and Venugopal, Jayarama Reddy and Seeram, Ramakrishna (2019) Bredigite Reinforced Electrospun Nanofibers for Bone Tissue Engineering. Materials Today: Proceedings, 7. pp. 449-454. (Published)

Monireh, Kouhi and Venugopal, Jayarama Reddy and Mohammadhossein, Fathi and Morteza, Shamanian and Afsaneh, Valipouri and Seeram, Ramakrishna (2019) Poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/fibrinogen/bredigite nanofibrous membranes and their integration with osteoblasts for guided bone regeneration. Journal of Biomedical Materials Research Part A, 107A. pp. 1154-1165. (Published)

Moorthy, Kohbalan and Jaber, Aws Naser and Mohd Arfian, Ismail and Ernawan, Ferda and Mohd Saberi, Mohamad and Safaai, Deris (2019) Missing-values imputation algorithms for microarray gene expression data. In: Microarray Bioinformatics. Methods in Molecular Biology, 1986 . Humana Press, New York, United States, pp. 255-266. ISBN 978-1-4939-9441-0

Mudassir, Jahanzeb and Yusrida, Darwis and Suriani, Muhamad and Khan, Arshad Ali (2019) Self-assembled insulin and nanogels polyelectrolyte complex (Ins/NGs-PEC) for oral insulin delivery: Characterization, lyophilization and in-vivo evaluation. International Journal of Nanomedicine, 14. pp. 4895-4909. ISSN 1178-2013. (Published)

Muhamad, R. and Yunus, N. A. and Asrenee, A. R. and Mohd Ali, Z. (2019) Obsession of Liminality: Religious and Cultural Contamination during Midlife Transition. Journal of Family Medicine Forecast, 2 (1). pp. 1-3. (Published)

Muhamad Abdul Hadi, Ahmad Sabri (2019) Problem facing by private developer involving abandoned projects in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhamad Addin Akmal, Mohd Raif and Nurlaila, Ismail and Nor Azah, Mohd Ali and Mohd Hezri Fazalul, Rahiman and Saiful Nizam, Tajuddin and Mohd Nasir, Taib (2019) Quadratic tuned kernel parameter in non-linear support vector machine (SVM) for agarwood oil compounds quality classification. Indonesian Journal of Electrical Engineering and Computer Science, 17 (3). pp. 1371-1376. ISSN 2502-4752. (Published)

Muhamad Adib, Rinalto and Nur Syahirah, Mohammad Nor and Muhammad Faiz, Mohamed Ameen and N., Zainol and Sunarti, Abd Rahman (2019) Activated carbon production from spent mushroom substrate for sulfide removal. ARPN Journal of Engineering and Applied Sciences, 14 (1). pp. 16-23. ISSN 1819-6608. (Published)

Muhamad Afiqah, Bappu (2019) Performance evaluation of charcoal barbeque with air ventilation system. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhamad Alif Hilmi, Mustafa (2019) Mineralogy and geochemistry investigation of Kuantan bauxite. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhamad Amir Yusof, Sujani (2019) The impact of regulation on construction labour productivity. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhamad Amirul, Asyraf Juhari and Nor Rul Hasma, Abdullah and Ibrahim Haruna, Shanono and Mahfuzah, Mustafa and Rosdiyana, Samad and Pebrianti, Dwi (2019) Optimal placement of TCSC for reactive power planning using grasshopper optimization algorithm considering line outage (N-M). In: National Seminar On Underwater System Technology 2018 (NUSYS’18), 26 - 27 September 2018 , Universiti Malaysia Pahang, Pekan. pp. 623-635., 538. ISSN 18761100 ISBN 978-981133707-9

Muhamad Asyraf, Shahrom and Mohamad Heerwan, Peeie and Mohamad Izhar, Ishak and Muhammad Zulhilmi, Ismail and Muhammad Solehuddin, Ibrahim (2019) Comparison of braking performance between mechanical and dynamic braking for Electric Powered Wheelchair. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012104). ISSN 1757-8991 (Print), 1757-899X (Online)

Muhamad Atif, Mohamed and Norazlianie, Sazali (2019) Polyimide-based Carbon Membrane: Effect of Coating Times on Helium Separations. Journal of Advanced Research in Applied Mechanics, 64 (1). pp. 1-6. ISSN 2289-7895. (Published)

Muhamad Dhanuri, Mat Noradin (2019) Behaviour of composite slab using finite element analysis. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhamad Fairoz, Azizan (2019) UMP lonjak kebolehupayaan TVET aras tinggi. Berita Harian .

Muhamad Fairuz, Ahmad Jasmi (2019) Maritime green supply chain management (MGSCM) and financial performance : a mediating effect of energy efficiency and low carbon performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Yudi, Fernando).

Muhamad Faiz, Abu Bakar (2019) Optimization of mycelium growth using genetic algorithm for multi-objective functions. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Muhamad Idaham, Umar Ong and M. A., Ameedeen and Imran Edzereiq, Kamarudin (2019) Approaches in creating meta-requirement: a systematic literature review. In: IOP Conference Series: Materials Science and Engineering, The 6th International Conference on Software Engineering & Computer Systems, 25-27 September 2019 , Pahang, Malaysia. pp. 1-9., 769 (012049). ISSN 1757-899X (Unpublished)

Muhamad Idaham, Umar Ong and Mohamed Ariff, Ameedeen (2019) A design theory for holistic student self-service university management system. In: 1st International Conference on Computing, Information Science and Engineering (ICISE 2020), 29-30 January 2020 , Kota Bharu, Kelantan. pp. 1-9.. (Unpublished)

Muhamad Izdhar, Zaki and Saptaji, Kushendarsyah and Ramdan, R. D. and Kurniawan, Tedi (2019) Fabrication of micro dimples pattern using ball end mill. In: IOP Conference Series: Materials Science and Engineering, International Conference on Design and Application of Engineering Materials (IC-DAEM) in conjunction with Seminar Nasional Metalurgi dan Material XI (SENAMM), 6-7 September 2018 , Bandung, Indonesia. pp. 1-8., 547 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhamad Qayyum, Dahlan and Herdawatie, Abdul Kadir and Khalid, Isa and Radzi, Ambar and Mohd Rizal, Arshad and Maziyah, Mat Noh (2019) Development of surface cleaning robot for shallow water. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018, 27-28 September 2018 , Universiti Malaysia Pahang. pp. 45-54., 538. ISBN 978-981-13-3708-6

Muhamad Samrie, Sakkaran (2019) Study on economics of abandoned building in peninsular Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhamad Shafiq, Jamaluddin (2019) Emergency management in Tahfiz Institutions at Kampung Janda Baik, Pahang. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhamad Tasyrif, Ghazali (2019) Mencorak kepimpinan masa hadapan. UMP News . p. 3. (Unpublished)

Muhammad, Aisha and Ali, Mohammed A. H. and Shanono, Ibrahim Haruna (2019) Fatigue and harmonic analysis of a diesel engine Crankshaft using ANSYS. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems, 21-22 August 2019 , Putrajaya, Malaysia. pp. 371-376.. ISBN 978-981-15-0950-6

Muhammad, Aisha and Shanono, Ibrahim Haruna (2019) Simulation of a Car crash using ANSYS. In: 2019 15th International Conference on Electronics, Computer and Computation, ICECCO 2019; 15th International Conference on Electronics, Computer and Computation, ICECCO 2019, 10-12 December 2019 , Abuja. pp. 1-5. (9043275). ISSN 978-172815160-1

Muhammad, Bilal and Norhayati, Rosli and Iftikhar, Ahmad and Mirza Rizwan, Sajid (2019) Numerical solution of fractional order delay differential equation via collocation method. In: ICOAIMS 2019: 2nd International Conference on Applied & Industrial Mathematics and Statistics 2019, 23 - 24 April 2019 , Zenith Hotel Kuantan. pp. 1-10.. (Unpublished)

Muhammad, Fuad and Ernawan, Ferda (2019) Frames selection based on modified entropy and object motion in video steganography. International Journal of Scientific and Technology Research, 8 (10). pp. 761-766. ISSN 2277-8616. (Published)

Muhammad, Lailatul Niza (2019) Particle swarm optimization based inverter impedance control to perform harmonic sharing in islanded microgrid. , [Research Report: Research Report] (Unpublished)

Muhammad Addeib, Mohd Subari (2019) Real time bus tracking system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Muhammad Adib Azri, Mohamad Nasaruddin (2019) An experimental study of the structural capacity of rectangular concrete beam with rice husk concrete (RHC) under flexural test- 5% and 15% rice husk replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Aiman, Mat Jamil (2019) Development of residential flood depth-damage curve for Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Aiman Alif, Mohd Rapei (2019) Effect of heat stress towards job performance among workers in palm oil mill. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Aiman Fikri, Mohamad Azlan (2019) A performance of fermented soybean in water treatment. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Aimran Amzar, Kamarudin (2019) Seismic performance to cable stayed bridge under different earthquake loadings. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Aizat, Meor Hamzah (2019) Finite element analysis of composite slabs. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Aizzuddin, Abdullah (2019) Development of temperature-insensitive fibre Bragg grating based pressure transducer. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Akmal, Remli and Mohd Saberi, Mohamad and Safaai, Deris and Azurah, A. Samah and Omatu, Sigeru and Corchado, Juan Manuel (2019) Cooperative enhanced scatter search with opposition-based learning schemes for parameter estimation in high dimensional kinetic models of biological systems. Expert Systems with Applications, 116. pp. 131-146. ISSN 0957-4174. (Published)

Muhammad Akmal, Remli and Mohd Saberi, Mohamad and Safaai, Deris and Sinnott, Richard O. and Suhaimi, Napis (2019) An Improved Scatter Search Algorithm for Parameter Estimation in Large-Scale Kinetic Models of Biochemical Systems. Current Proteomics, 16 (5). pp. 425-436. ISSN 1570-1646. (Published)

Muhammad Amrun Aniq, Mohamed Saidi (2019) Naturel kiss online shopping (NKOS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Muhammad Arif, Abdullah (2019) Optimisation of energy efficient Assembly Sequence Planning using Moth-Flame Optimisation alghorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Arif, Abdullah and Ahmad Nasser, Mohd Rose and Zakri, Ghazalli and Ahmad Nasser, Mohd Rose (2019) A case study of energy efficient assembly sequence planning problem. 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 469 (012013). (Published)

Muhammad Arif, Abdullah and M. F. F., Ab Rashid and Z., Ghazalli (2019) Optimization of Assembly Sequence Planning Using Soft Computing Approaches: A Review. Archives of Computational Methods in Engineering, 26 (2). pp. 461-474. ISSN 1886-1784. (Published)

Muhammad Arif Fahmi, Supian (2019) The optimization of cellulose nanofibre (CNF) production from empty fruit bunch (EFB) using steam explosion pre-treatment. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Arif Fahmi, Supian and Khairatun Najwa, Mohd Amin and Saidatul Shima, Jamari and Shahril, Mohamad (2019) Production of Cellulose Nanofiber (Cnf) from Empty Fruit Bunch (EFB) via mechanical method. Journal of Environmental Chemical Engineering. ISSN 2213-3437. (In Press / Online First) (In Press / Online First)

Muhammad Arif Fahmi, Supian and S., Mohamad and K. N. M, Amin and Saidatul Shima, Jamari and Junaidah, Zakaria and S. F. S., Mohamad and Shahril, Mohamad (2019) Effect of different bleaching reagents and process sequences on the properties of steam exploded empty fruit bunch (EFB) fiber. In: 26th Regional Symposium on Chemical Engineering (RSCE 2019), 30-31 July 2019 , Kuala Lumpur, Malaysia. pp. 1-14.. (Unpublished)

Muhammad Ashraf, Fauzi (2019) Colombia rantau Asia. Harian Metro . p. 18.

Muhammad Ashraf, Fauzi (2019) Elak nasib hutan Amazon berulang di Malaysia. Berita Harian . p. 1.

Muhammad Ashraf, Fauzi (2019) Guru jadi warden wajar dikurang waktu mengajar. Berita Harian .

Muhammad Ashraf, Fauzi (2019) Hab transit dadah: 'Colombia' rantau Asia. Harian Metro . p. 1.

Muhammad Ashraf, Fauzi (2019) Jangan umpan telefon diamkan anak. Utusan . p. 1.

Muhammad Ashraf, Fauzi (2019) Kekalkan Hari Sukan Negara. Utusan Malaysia . p. 1.

Muhammad Ashraf, Fauzi (2019) Knowledge sharing in Asia Pacific via virtual community platform: A systematic review. International Journal of Web Based Communities, 15 (4). pp. 368-394. ISSN 1741-8216. (Published)

Muhammad Ashraf, Fauzi (2019) Perangi ancaman siber. Utusan Malaysia . p. 1.

Muhammad Ashraf, Fauzi (2019) Percepat Akta Jerebu Rentas Sempadan. Berita Harian . p. 1.

Muhammad Ashraf, Fauzi (2019) SOSMA untuk pengkhianat negara. Utusan . p. 1.

Muhammad Ashraf, Fauzi (2019) Subjek alam sekitar di sekolah: Peka jaga kelestarian alam. Harian Metro . p. 18.

Muhammad Ashraf, Fauzi (2019) Teh boba penyebab kencing manis? Utusan . p. 1.

Muhammad Ashraf, Fauzi (2019) Wira tidak didendang. Utusan Malaysia . p. 1.

Muhammad Ashraf, Fauzi and Christine Nya, Ling Tan and Ramayah, Thurasamy and Ojo, Adedapo Oluwaseyi (2019) Evaluating academics’ knowledge sharing intentions in Malaysian public universities. Malaysian Journal of Library & Information Science, 24 (1). pp. 123-143. ISSN 1394-6234. (Published)

Muhammad Ashraf, Fauzi and Christine Tan, Nya-Ling and Ramayah, Thursamy and Ojo, Adedapo Oluwaseyi (2019) Knowledge sharing: Role of academics towards research productivity in higher learning institution. VINE Journal of Information and Knowledge Management Systems, 49 (1). pp. 136-159. ISSN 2059-5891. (Published)

Muhammad Ashraf, Fauzi and Norazha, Paiman (2019) A critical review of knowledge sharing in various industries and organizations. International Journal of Scientific & Technology Research, 8 (12). pp. 2218-2226. ISSN 2277-8616. (Published)

Muhammad Assyifaa Ulhayat, Jahidin and Mohamad Hilmi, Mat Said (2019) Pengurusan dan peranan Baitulmal pada zaman Rasulullah S.A.W. dan pemerintahan Khulafa Ar-Rashidin. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 295-304.. ISBN 978-967-17268-1-5

Muhammad Assyifaa Ulhayat, Jahidin and Mohamad Hilmi, Mat Said and Hassoba, Ahmad Mahmoud Abu and Muhammad Fakhruddin, Ishak (2019) Hukuman Diat: Kajian pengamalan semasa dalam Undang-Undang Malaysia. In: eProsiding: Cabaran Pengajian Islam Dalam Era Revolusi Industri 4.0 (SePIA 1.0), 25-26 September 2019 , Kolej Universiti Islam Pahang Sultan Ahmad Shah (KUIPSAS), Pahang, Malaysia. pp. 86-97.. ISBN 978-967-17268-1-5

Muhammad Asyraf, Hasan and Mohd Ferdaus, Musa (2019) UMP students helped victims of earthquake in Lombok. UMP News . (Unpublished)

Muhammad Asyraf, Othman (2019) A wireless water pollution monitoring system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Muhammad Asyraf, Rahman (2019) Limiter removal: fitness tracking mobile application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Muhammad Azammuddin, Mohd Norman (2019) Compression test of c-section cold-formed steel with an opening. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Azim Shafiq, Mohd Zulhairi (2019) Flexural behaviour of profiled steel decking using finite element analysis. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Azizur Rahman, Ramli and Mansor, Sulaiman and Noor Faezah, Basary (2019) The role of Majallah Ahkam Al-Adliyyah in developing conceptual sukuk model based on maqasid shariah: A qualitative study. International Journal of Advanced Research in Economics and Finance, 1 (1). pp. 29-37. ISSN 2682 - 812X. (Published)

Muhammad Azli, Shukri and Amirul, Ahmad and Rosilavi, Mat Jusoh (2019) Transformasi Organisasi Manusia Asas Perubahan. UMP News . (Unpublished)

Muhammad Aznil, Ab Aziz and Mohammad Fadhil, Abas and Mohamad Khairul Anwar, Abu Bashri and Norhafidzah, Mohd Saad and Mohd Hisyam, Mohd Ariff (2019) Evaluating IoT based passive water catchment monitoring system data acquisition and analysis. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1373-1382. ISSN 2302-9285. (Published)

Muhammad Bilal, Muslim (2019) Model development and performance analysis of integrated gasification process and proton exchange membrane fuel cell. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noor Asma Fazli, Abdul Samad).

Muhammad Fadhli, Suhaimi and Mohd Hazwan, Yusof (2019) The effect of tube length and cold exit diameter on the cold flow temperature of vortex tube using high temperature working gas. In: IOP Conference Series: 1st International Postgraduate Conference on Mechanical EngineeringInternational Postgraduate Conference on Mechanical Engineering 2018, 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012040). ISSN 1757-899X

Muhammad Faisal, Siddiqui and Winters, Harvey and Farhana, Maqbool and Qayyum, Sadia and Singh, Lakhveer and Ullah, Ihsan and Rahman, Zia Ur and Fazal, Adnan and Rehman, Abdul (2019) Tannic acid treatment to deter microbial biofouling in flow cell system and on RO membrane in drip flow reactor. Desalination and Water Treatment, 171. pp. 62-66. ISSN 1944-3994. (Published)

Muhammad Faizzul, Ahmam (2019) Low-cost web-based greenhouse monitoring system using NodeMCU ESP8266. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Muhammad Fakhri, Mad Din (2019) Issue in building construction due to quality control and quality assurance in Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Firdaus, Masrom and Normaniha, Abd Ghani and Nur Fadzlina, Jamin and Nur Atiqah Adlina, Razali (2019) Motion control of triple links inverted pendulum on two-wheeled system using interval type-2 fuzzy logic control base on particle swarm optimization. In: IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2019), 29 November - 1 December 2019 , Batu Feringghi, Penang, Malaysia. pp. 1-6.. (Unpublished)

Muhammad Hafizul Hilmi, Ibrahim (2019) Shift work effect towards muscular endurance among security officers of higher education institution in east coast Malaysia. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Hanif, Muhamad (2019) Geophysical subsurface profiling of Kuantan bauxite formation. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Hasnun Hasib, Mohd Ariffin (2019) Seismic performance of cantilever retaining wall under different earthquake loading. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Haziq, Jamil and Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Siddique, Md. Nurul Islam and Fung, Lee Sui (2019) Peat Swamp Groundwater Treatment: Efficiency of Mixed Citrus Peel and Kernel Activated Carbon Layer. In: 11th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2019), 19-20 November 2019 , Kuantan, Pahang. pp. 1-10.. (Unpublished)

Muhammad Haziq, Jamil and Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Sulaiman, S. and Siddique, Md. Nurul Islam and Woon, S. X. R. (2019) Phyt