UMP Institutional Repository

Browse by Type

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items: 5016.

A

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Safian, Sharif and Sasahara, Hiroyuki (2019) The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045. Tribology International, 129. pp. 347-362. ISSN 0301-679X

A. K. M., Kafi and Alim, Samiul and Rajan, Jose and M. M., Yusoff (2019) Hemoglobin Immobilization on multiporous nanofibers of SnO2 and chitosan composite for hydrogen peroxide sensing. Journal of Nanoscience and Nanotechnology, 19 (4). pp. 2027-2033. ISSN 1533-4880 (Print); 1533-4899 (Online)

Abdalla, Ahmed N. and Awad, Omar I. and Tao, Hai and Ibrahim, Thamir K. and R., Mamat and Hammid, Ali Thaeer (2019) Performance and emissions of gasoline blended with fusel oil that a potential using as an octane enhancer. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41 (8). pp. 931-947. ISSN 1556-7036 (Print); 1556-7230 (Online)

Ahmed, Firas D. and Mazlina, Abdul Majid (2019) Towards agent-based petri net decision making modelling for cloud service composition: A literature survey. Journal of Network and Computer Applications, 130. pp. 14-38. ISSN 1084-8045

A. A. M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat and Mahendran, Samykano and G., Najafi (2019) Performance improvement in mobile air conditioning system using Al2O3/PAG nanolubricant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1299-1310. ISSN 1388-6150 (print); 1588-2926 (online)

Amir, Abdul Razak and Zafri Azran, Abdul Majid and Mohamad Firdaus, Basrawi and A. F., Sharol and M.H., Ruslan and K., Sopian (2019) A performance and technoeconomic study of different geometrical designs of compact single-pass cross-matrix solar air collector with square-tube absorbers. Solar Energy, 178. 314 - 330. ISSN 0038-092X

A. K. M., Kafi and Rajan, Jose and M. M., Yusoff and Samiul, Alim (2019) Application of polymerized multiporous nanofiber of SnO2 for designing a bienzyme glucose biosensor based on HRP/GOx. International Journal of Biological Macromolecules, 123. pp. 1028-1034.

Ali, Gomaa A. M. and Habeeb, Omar Abed and Algarni, H. and K. F., Chong (2019) CaO impregnated highly porous honeycomb activated carbon from agriculture waste: symmetrical supercapacitor study. Journal of Materials Science and Chemical Engineering, 54 (1). pp. 683-692. ISSN 2327-6045 (print); 2327-6053 (online)

Al-Omoush, A.A. and Alsewari, Abdulrahman A. and Alamri, Hammoudeh S. and Kamal Z., Zamli (2019) Comprehensive review of the development of the harmony search algorithm and its applications. IEEE Access, 7. pp. 14233-14245. ISSN 2169-3536

Adeleke, A. Q. and Bahaudin, A. Y. and Kamaruddeen, A. M. and Bamgbaded, J. A. and M., Waris and Panda, Sitansu and Afolabi, Yakibi Ayodele (2019) An Empirical Analysis of Organizational External Factors on Construction Risk Management. International Journal of Supply Chain Management (IJSCM), 8 (1). pp. 932-940. ISSN 2050-7399 (Online)

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod and Blaabjerg, Frede and Yang, Yongheng (2019) Fault ride-through control of grid-connected photovoltaic power plants: A review. Solar Energy, 180. pp. 180-190. ISSN 0038-092X

Al-Khaleefa, Ahmed Salih and Mohd Riduan, Ahmad and Azmi Awang, Md Isa and Mona Riza, Mohd Esa and Al-Saffar, Ahmed Ali Mohammed and Hassan, Mustafa Hamid (2019) Feature Adaptive and Cyclic Dynamic Learning Based on Infinite Term Memory Extreme Learning Machine. Applied Sciences, 9 (5). pp. 1-17. ISSN 2076-3417

Alara, Oluwaseun Ruth and Nour, A. H. (2019) GC-MS and FTIR analyses of oils from Hibiscus sabdariffa, Stigma maydis and Chromolaena odorataleaf obtained from Malaysia: Potential sources of fatty acids. Chemical Data Collections, 20. pp. 1-7. ISSN 2405-8300

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Safian, Sharif and Hiroyuki, Sasahara (2019) Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique. Journal of Cleaner Production, 209. pp. 947-964. ISSN 0959-6526 (Print); 1879-1786 (Online) (In Press)

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod (2019) Voltage Sag Detection in Grid-Connected Photovoltaic Power Plant for Low Voltage Ride-Through Control. Recent Advances in Electrical & Electronic Engineering, 12. pp. 1-9. ISSN 2352-0973

Akhyari, Nasir and Ruzaini, Abdullah Arshah and M. R., Abdul Hamid (2019) An analysis on the dimensions of information security culture concept: A review. Elsevier Journal of Information Security and Applications, 44. pp. 12-22. ISSN 2214-2126

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and Alam, A. K. M. Moshiul and Heim, Hans Peter and Feldmann, Maik (2018) Synergized poly(lactic acid)-hydroxyapatite composites: Biocompatibility study. Journal of Applied Polymer Science, 136 (15). ISSN 1097-4628 (In Press)

Agung, E. H. and Mohamad Hamdan, Mohammad Hazim and Siregar, J. P. and Bachtiar, Dandi and Cionita, Tezara and Jamiluddin, Jaafar (2018) Water Absorption Behaviour and Mechanical Performance of Pineapple Leaf Fibre Reinforced Polylactic Acid Composites. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (4). pp. 5760-5774. ISSN 1985-9325(Print); 2180-1606 (Online)

Ali, Mohammed A. H. and Au, Kai Lun (2018) A cascading fuzzy logic with image processing algorithm-based defect detection for automatic visual inspection of industrial cylindrical object’s surface. The International Journal of Advanced Manufacturing Technology. pp. 1-14. ISSN 0268-3768 (Print), 1433-3015 (Online)

Almatar, Manaf and Makky, Essam A. and AlMandeal, Husam and Eker, Emel and Kayar, Begum and Var, Isıl and Koksal, Fatih (2018) Does the Development of Vaccines Advance Solutions for Tuberculosis? Current Molecular Pharmacology. ISSN 1874-4702 (In Press)

A. K. M., Kafi and Naqshabandi, M. and M. M., Yusoff and Crossley, Maxwell J. (2018) Improved peroxide biosensor based on Horseradish Peroxidase/Carbon Nanotube on a thiol-modified gold electrode. Enzyme and Microbial Technology, 113. pp. 67-74. ISSN 0141-0229

Abdulbari, Hayder A. and Fakhruddin, Sarmad K. and Ahmed Ziad, Sulaiman and Rafeeq, Hind A. (2018) Investigating the improvement of Degradation Resistant with the Addition of SDBS Anionic Surfactant to PEO polymer. MATEC Web of Conferences, 225. 06019. ISSN 2261-236X

Abdul Sahli, Fakharudin and Md Nasir, Sulaiman and Norwati, Mustapha (2018) Artificial Neural Network Modelling of Biogas Production Processes. Advanced Science Letters, 24 (10). pp. 7582-7587. ISSN 1936-6612

Alani, Ali A. and Ahmed, Firas D. and Mazlina, Abdul Majid and Mohd Sharifuddin, Ahmad (2018) Big Data Analytics for Healthcare Organizations A Case Study of the Iraqi Healthcare Sector. Advanced Science Letters, 24 (10). pp. 7783-7789. ISSN 1936-6612

Abdullah, Nasser and Kamal Z., Zamli (2018) Comparative Study between Flower Pollination Algorithm and Cuckoo Search Algorithm for t-way Test Data Generation. Advanced Science Letters, 24 (10). pp. 7465-7469. ISSN 1936-6612

Abdullah, Nasser and Kamal Z., Zamli (2018) Comparative Study of Adaptive Elitism and Mutation Operators in Flower Pollination Algorithm for Combinatorial Testing Problem. Advanced Science Letters, 24 (10). pp. 7470-7475. ISSN 1936-6612

Ahmed, M. M. and Kader, Md. Abdul and Kamal Z., Zamli (2018) Comparative Study to Measure the Quality of Big Scholarly Data and Its Hypothetical Mapping towards Granular Computing. Advanced Science Letters, 24 (10). pp. 7810-7814. ISSN 1936-6612

Anthony, Bokolo Jnr. and Mazlina, Abdul Majid and Awanis, Romli (2018) Exploring Green Information Technology Implementation in Collaborative Enterprise. Advanced Science Letters, 24 (10). pp. 7707-7715. ISSN 1936-6612

Atta, Mohammed Thamir and Awanis, Romli (2018) The Impact of Information Quality and Usability on Intention to Use Student Information System. Advanced Science Letters, 24 (10). pp. 7800-7805. ISSN 1936-6612

Al-Sewari, Abdul Rahman Ahmed Mohammed and Mu’aza, Aminu Aminu and Rassem, Taha H. and Tairan, Nasser M. and Shah, Habib and Kamal Z., Zamli (2018) One Parameter at a time Combinatorial Testing Strategy Based on Harmony Search Algorithm OPAT-HS. Advanced Science Letters, 24 (10). pp. 7273-7277. ISSN 1936-6612

Alamri, Hammoudeh S. and Alsariera, Yazan A. and Kamal Z., Zamli (2018) Opposition-based Whale Optimization Algorithm. Advanced Science Letters, 24 (10). pp. 7461-7464. ISSN 1936-6612

Ali, Mohammed A. H. and Mailah, Musa (2018) Path Planning and Control of Mobile Robot in Road Environments using Sensor Fusion and Active Force Control. IEEE Transactions on Vehicular Technology. pp. 1-20. ISSN 0018-9545

Azrag, M. A. K. and Tuty Asmawaty, Abdul Kadir and Mohd Arfian, Ismail (2018) A Review of Large-Scale Kinetic Parameters in Metabolic Network Model of Escherichia coli. Advanced Science Letters, 24 (10). pp. 7512-7518. ISSN 1936-6612

Anis Izzati, Ab Fauzan and Mazlina, Abdul Majid and Allegra, Mario (2018) A Review on Human Pedestrian Movement System using Agent-Based Simulation and Discrete Event Simulation. Advanced Science Letters, 24 (10). pp. 7290-7294. ISSN 1936-6612

Abbas, Ali. M. H. and Rahman, Md. Arafatur and M. Nomani, Kabir and Kamal Z., Zamli (2018) Scalable MAC Strategy for Emergency Communication Networks. Advanced Science Letters, 24 (10). pp. 7407-7417. ISSN 1936-6612

Alomoush, Alaa A. and Alsewari, Abdulrahman A. and Alamri, Hammoudeh S. and Kamal Z., Zamli (2018) Solving 0/1 Knapsack Problem Using Hybrid HS and Jaya Algorithms. Advanced Science Letters, 24 (10). pp. 7486-7489. ISSN 1936-6612

Azma, Abdullah and Hasan, Kahtan and Abdulgabber, Mansoor Abdullateef and Rohani, Abu Bakar and Roslina, Abd. Hamid (2018) A tool for capturing safety properties from critical system specifications written in SOFL. Advanced Science Letters, 24 (10). pp. 7311-7316. ISSN 1936-6612

Ahmad Zaifazlin, Zainordin and Priyandoko, Gigih and Zamri, Mohamed (2018) Performance Simulation Analysis for Magnetorheological Damper with Internal Meandering Flow Valve. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (3). pp. 5511-5521. ISSN 1985-9325(Print); 2180-1606 (Online)

Amelia Ritahani, Ismail and Nur ‘Atikah, Mohd Ali and Junaida, Sulaiman (2018) Change vulnerability forecasting using deep learning algorithm for Southeast Asia. Knowledge Engineering and Data Science (KEDS), 1 (2). pp. 74-78. ISSN 2597-4602 (Print); 2597-4637 (Online)

Ang, F. Chen and M. Akmal, Adzmi and Abdul Adam, Abdullah and Mohd Fahmi, Othman and Mohd Kamal, Kamaruzzaman and Anes, G. Mrwan (2018) Combustion characteristics, engine performances and emissions of a diesel engine using nanoparticle-diesel fuel blends with aluminium oxide, carbon nanotubes and silicon oxide. Energy Conversion and Management, 171. pp. 461-477. ISSN 0196-8904

Ahmad Huzaimi, Abd Jamil and Mohamad Syazli, Fathi (2018) Contractual challenges for BIM-based construction projects: a systematic review. Built Environment Project and Asset Management, 8 (4). pp. 372-385. ISSN 2044-124X

Ali, Mohammed A. H. and Musa, Mailah (2018) Laser simulator: a novel search graph-based path planning approach. International Journal of Advanced Robotic Systems, 15 (5). pp. 1-16. ISSN 1729-8806

Anthony, Bokolo Jnr. and Mazlina, Abdul Majid and Awanis, Romli (2018) A collaborative agent based green IS practice assessment tool for environmental sustainability attainment in enterprise data centers. Journal of Enterprise Information Management, 31 (5). pp. 771-795. ISSN 1741-0398

Ahmad Shahrizan, Abdul Ghani (2018) Image contrast enhancement using an integration of recursive-overlapped contrast limited adaptive histogram specification and dual-image wavelet fusion for the high visibility of deep underwater image. Ocean Engineering, 162. pp. 224-238. ISSN 0029-8018

A. A. M., Redhwan and W. H., Azmi and Nurul Nadia, Mohd Zawawi and M. Z., Sharif and R., Mamat (2018) Sonication Time Effect towards Stability of Al2O3/PAG and SiO2/PAG Nanolubricants. Journal of Mechanical Engineering, SI 5 (1). pp. 14-27. ISSN 1823-5514

Anwar, P. P. Abdul Majeed and Zahari, Taha and Mohammed A., Hashem Ali and Ismail, Mohd Khairuddin and Deboucha, Abdelhakim and Mohd Yashim, Wong Paul Tze and Amar Faiz, Zainal Abidin (2018) A hybrid active force control of a lower limb exoskeleton for gait rehabilitation. Biomedizinische Technik, 63 (4). pp. 491-500. ISSN 0013-5585

Addie Irawan, Hashim and Mohd Falfazli, Mat Jusof and Mohammad Fadhil, Abas (2018) Label-QoS switching protocol for quality of service assurance in dynamic swarm robot local network. International Journal of Communication Systems, 31 (10). ISSN 10745351

Alara, Oluwaseun Ruth and Nour, A. H. and Ukaegbu, Chinonso Ishmael and Azhari, H. Nour (2018) Vernonia cinerea leaves as the source of phenolic compounds, antioxidants, and anti-diabetic activity using microwave-assisted extraction technique. Industrial Crops and Products, 122. pp. 533-544. ISSN 0926-6690

Anthony Jnr, Bokolo and Mazlina, Abdul Majid and Awanis, Romli (2018) Green information technology adoption towards a sustainability policy agenda for government-based institutions: an administrative perspective. Journal of Science and Technology Policy Management. pp. 1-27. ISSN 2053-4620 (In Press)

Abdulbari, Hayder A. and Fiona Ling, Wang Ming and Zulkafli, Hassan and Heng, J. Thing (2018) Experimental investigations on biopolymer in enhancing the liquid flow in microchannel. Advances in Polymer Technology, 37 (8). pp. 3136-3145. ISSN 1098-2329

Abdul Rahman, Zahari and Puteri Fadzline, Tamyez and Noor Azlinna, Azizan and Fariza, Hashim (2018) Students Spin-Off Intentions in Malaysian Higher Educational Institutions: Founders Characteristics and University Roles. Journal of Entrepreneurship Education, 21 (3). pp. 1-15. ISSN 1528-2651

Arman Shah, Abdullah and Mas Ayu, Hassan and Rosdi, Daud and Sudin, Izman and Siti Nurul Fasehah, Ismail and Che Ghani, Che Kob and Mohammed Rafiq, Abdul Kadir (2018) The influence of ultrasonic vibration frequency on the properties of TiN coated biomedical Ti-13Zr-13Nb. Metals, 8 (5). pp. 1-10. ISSN 2075-4701

Abdul Rahman, Zahari and Noor Azlinna, Azizan (2018) Perception of barriers in setting up student spin-offs. Journal of Technology Management and Business, 24 (5). ISSN 2289-7224

Ali, Gomaa A. M. and Chong, Kwok Feng and M. M., Yusoff and Algarni, H. (2018) One-step electrosynthesis of MnO2/rGO nanocomposite and its enhanced electrochemical performance. Ceramics International, 44 (7). pp. 7799-7807. ISSN 02728842

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. and W. M. F., Wan Ishak (2018) Non-aqueous phase liquids distribution in three-fluid phase systems in double-porosity soil media: Experimental investigation using image analysis. Groundwater for Sustainable Development, 7. pp. 133-142. ISSN 2352-801X

Alara, Oluwaseun Ruth and Nour, A. H. and Siti Kholijah, Abdul Mudalip and Olalere, Olusegun Abayomi (2018) Microwave-assisted extraction of Vernonia amygdalina leaf for optimal recovery of total phenolic content. Journal of Applied Research on Medicinal and Aromatic Plants, 10. pp. 16-24. ISSN 2214-7861

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Zaidi, Embong and Samion, Syahrullail (2018) Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid. Tribology International, 120. pp. 520-534. ISSN 0301-679X

Awad, Omar I. and R., Mamat and Ibrahim, Thamir K. and Kettner, Maurice and K., Kadirgama and A. M., Leman and A. I.M., Shaiful (2018) Effects of fusel oil water content reduction on fuel properties, performance and emissions of SI engine fueled with gasoline -fusel oil blends. Renewable Energy, 118. pp. 858-869. ISSN 0960-1481

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and Heim, Hans P. and Feldmann, Maik (2018) Impact modified PLA-hydroxyapatite composites – Thermo-mechanical properties. Composites Part A: Applied Science and Manufacturing, 107. pp. 326-333. ISSN 1359-835X

Abdul Razak, Zainal Kifli and Shahida Hanum, Kamarullah and Siti Norhafiza, Mohd Khazaai and Gaanty Pragas, Maniam (2018) Synthesis of alumina-CaO-KI catalyst for the production of biodiesel from rubber seed oil [Sintesis mangkin alumina-CaO-KI untuk penghasilan biodiesel daripada minyak biji getah]. Malaysian Journal of Analytical Sciences, 22 (2). pp. 279-285. ISSN 1394-2506

Ali, Mohammed Hasan and Mohamad Fadli, Zolkipli and Al Mohammed, B.A.D. and Alyani, Ismail (2018) A new intrusion detection system based on fast learning network and particle swarm optimization. IEEE Access, 6. 20255 -20261. ISSN 2169-3536

Alara, Oluwaseun Ruth and Nour, A. H. and Afolabi, Haruna Kolawole and Olalere, Olusegun Abayomi (2018) Efficient extraction of antioxidants from Vernonia cinerea leaves: Comparing response surface methodology and artificial neural network. Beni-Suef University Journal of Basic and Applied Sciences, 7 (3). pp. 276-285. ISSN 2314-8535

Abdulbari, Hayder A. and Mohamad Amran, Mohd Salleh and Musaab K, Rashed and M Halim, Shah Ismail (2018) Passive, active, and interactive drag-reduction technique to reduce friction and enhance the mixing intensity in rotating disk apparatus. Chemical Engineering Communications, 205 (12). pp. 1623-1640. ISSN 1563-5201

Alara, Oluwaseun Ruth and Nour, A. H. and Olalere, Olusegun Abayomi (2018) Ethanolic extraction of bioactive compounds from Vernonia amygdalina leaf using response surface methodology as an optimization tool. Journal of Food Measurement and Characterization, 12 (2). pp. 1107-1122. ISSN 2193-4126 (Print); 2193-4134 (Online)

Abdulbari, Hayder A. and Nizam, Zuhan (2018) Grease Formulation from Palm Oil Industry Wastes. Waste and Biomass Valorization, 9. pp. 2447-2457. ISSN 1877-2641

Awad, Omar I. and R., Mamat and Ali, Obed Majeed and N. A. C., Sidik and Talal, Yusaf and K., Kadirgama and Kettner, Maurice (2018) Alcohol and ether as alternative fuels in spark ignition engine: A review. Renewable and Sustainable Energy Reviews, 82. pp. 2586-2605. ISSN 1364-0321

Asmara, Y. P. (2018) The roles of H2S gas in behavior of carbon steel corrosion in oil and gas environment: a review. Jurnal Teknik Mesin Mercu Buana (JTM), 7 (1). pp. 37-43. ISSN 2089-7235(Print); 2549-2888(Online)

Anthony, Bokolo Jnr. and Mazlina, Abdul Majid and Awanis, Romli (2018) A proposed model for green practice adoption and implementation in information technology based organizations. Problemy Ekorozwoju - Problems Of Sustainable Development, 13 (1). pp. 95-112. ISSN 1895-6912

Ahmed, Abdulghani Ali and Chua, Xue Li (2018) Analyzing Data Remnant Remains on User Devices to Determine Probative Artifacts in Cloud Environment. Journal of Forensic Sciences, 63 (1). pp. 112-121. ISSN 0022-1198

Asnida, M. and Sakinah, Hisham and N. W., Awang and Amirruddin, Abdul Kadir and M. M., Noor and K., Kadirgama and D., Ramasamy and G., Najafi and F., Tarlochan (2018) Copper (II) oxide nanoparticles as additve in engine oil to increase the durability of piston-liner contact. Fuel, 212. pp. 656-667. ISSN 0016-2361

Ansah, Richard Hannis and Sorooshian, Shahryar (2018) 4P delays in project management. Engineering, Construction and Architectural Management, 25 (1). pp. 62-76. ISSN 0969-9988 (Print); 1365-232X (Online)

Anh, Tuan Hoang and Van, Vang Le and M.Said Al-Tawaha, Abdel Rahman and Duong, Nam Nguyen and M.Said Al-Tawaha, Abdel Razzaq and M. M., Noor and Van, Viet Pham (2018) An Absorption Capacity Investigation of New Absorbent Based On Polyurethane Foams and Rice Straw for Oil Spill Cleanup. Petroleum Science and Technology, 36 (5). pp. 361-370. ISSN 1091-6466(print); 1532-2459(online)

Albashir, Walid Ali and Yuserrie, Zainuddin and Panigrahi, Shrikant (2018) The Acceptance of Islamic Banking Products in Libya: A Theory of Planned Behavior Approach. International Journal of Economics and Financial Issues, 8 (3). pp. 105-111. ISSN 2146-4138

Al-Sharafi, Mohammed A. and Mufadhal, Mokhtar Esmail and Noor Azida, Sahabudin and Ruzaini, Abdullah Arshah (2018) The Acceptance of Online Social Networks as a Technology-Based Education Tools among Higher Institutes Students: A Structural Equation Modeling Approach. Scientia Iranica. pp. 1-16. ISSN 2345-3605 (In Press)

Albtoosh, Ja’far A. Aldibat and Ahmad Tarmizi, Haron and Shaqdan, Ashraf (2018) Analysis of Government Residential Projects Overruns in Jordan. Journal of Engineering and Applied Sciences, 13 (9). pp. 2570-2574. ISSN 1816-949x (Print); 1818-7803 (Online)

Ahmad Fitri, Yusop and R., Mamat and Yusaf, Talal and G., Najafi and Mohd Hafizil, Mat Yasin and Akasyah, M Khathri (2018) Analysis of Particulate Matter (PM) Emissions in Diesel Engines Using Palm Oil Biodiesel Blended with Diesel Fuel. Energies, 11 (5). pp. 1-25. ISSN 1996-1073

Alginahi, Yasser M. and Mudassar, Mohammed and Kabir, M. Nomani and Tayan, Omar (2018) Analyzing the Crowd Evacuation Pattern of a Large Densely Populated Building. Arabian Journal for Science and Engineering. pp. 1-16. ISSN 1319-8025 (print); 2191-4281 (online) (In Press)

Almatar, Manaf and Makky, Essam A. and Yakici, Gulfer and Var, Isil and Kayar, Begum and Koksal, Fatih (2018) Antimicrobial peptides as an alternative to anti-tuberculosis drugs. Pharmacological Research, 128. pp. 288-305. ISSN 1043-6618

Asmara, Y. P. and Kurniawan, Tedi and Sutjipto, A. G. E. and Jamiluddin, Jaafar (2018) Application of plants extracts as green corrosion inhibitors for steel in concrete - a review. Indonesian Journal of Science & Technology, 3 (2). pp. 76-88. ISSN 2527-8045

Ahmat, Farouq and M. Y. M., Yunus and Badhrulhisham, Abdul Aziz and Anwaruddin, Hisyam (2018) Application of thermodynamic modelling and experimental investigation of leaching yttrium from liquid crystal display. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 3. pp. 17-25. ISSN 0126-8139

Al-Fakih, Kamal Ahmed and Chin, Siew Choo and Doh, Shu Ing (2018) Behavior of Extended End-Plate Steel Beam to Column Connections. The Open Civil Engineering Journal, 12. pp. 250-262. ISSN 1874-1495

Akbari, Sweeta and Nour, A. H. and R. M., Yunus and Farhan, Abdulrahman Hasan (2018) Biosurfactants as promising multifunctional agent: A mini review. International Journal of Innovative Research and Scientific Studies, 1 (1). pp. 1-6. ISSN 2617-6548

Akbari, Sweeta and Nour, A. H. and R. M., Yunus and Fayaz, Fahim and Alara, Oluwaseun Ruth (2018) Biosurfactants-a new frontier for social and environmental safety: a mini review. Biotechnology Research and Innovation, 2 (1). pp. 81-90. ISSN 2452-0721

Asim, Zeeshan and Sorooshian, Shahryar and Muzamir, Hasan (2018) Capabilities of R&D: Literature Analysis. International Journal of Mechanical Engineering and Technology (IJMET), 9 (10). pp. 316-324. ISSN 0976-6340

A. K. M., Kafi and C. C. L., Yam and N. S., Azmi and M. M., Yusoff (2018) Carbonyl Functionalized Single Walled Carbon Nanotube-Hb Crosslinked Network: A Novel Platform for Studying Bio-Electrochemistry and Electrocatalysis of Hemoglobin. Journal of Nanoscience and Nanotechnology, 18 (4). pp. 2422-2428. ISSN 1533-4880 (Print); 1533-4899 (Online)

Abdalla, Ahmed N. and Faraj, Moneer A. and Fahmi, Samsuri and Damhuji, Rifai and Kharudin, Ali and Al-Douri, Y. (2018) Challenges in improving the performance of eddy current testing: Review. Measurement and Control. pp. 1-19. ISSN 0020-2940 (In Press)

Alara, Oluwaseun Ruth and Nour, A. H. and Siti Kholijah, Abdul Mudalip and Olalere, Olusegun Abayomi (2018) Characterization and effect of extraction solvents on the yield and total phenolic content from Vernonia amygdalina leaves. Journal of Food Measurement and Characterization, 12 (1). pp. 311-316. ISSN 2193-4126

Alajmi, Qasim and Sadiq, Ali Safa and Adzhar, Kamaludin and Al-Sharafi, Mohammed A. (2018) Cloud Computing Delivery and Delivery Models: Opportunity and Challenges. Advanced Science Letters, 24 (10). pp. 4040-4044. ISSN 1936-6612

Aboelazm, Eslam A. A. and Ali, Gomaa A. M. and K. F., Chong (2018) Cobalt Oxide Supercapacitor Electrode Recovered from Spent Lithium-Ion Battery. Chemistry of Advanced Materials (CAM), 3 (4). pp. 67-74. ISSN 2415-6213

Aizi Nor Mazila, Ramli and Nor Hasmaliana, Abdul Manas and Azzmer Azzar, Abdul Hamid and Hazrulrizawati, Hamid and Rosli Md, Illias (2018) Comparative structural analysis of fruit and stem bromelain from Ananas comosus. Food Chemistry, 266. pp. 183-191. ISSN 0308-8146

Alsamawi, Mohamed Abdulwali and Mohd Ridzuan, Darun and Panigrahi, Shrikant (2018) Conceptualizing the Effect of CSR Activities on Affective Commitment and Corporate Performance. International Journal of Management and Applied Science, 4 (2). pp. 91-98. ISSN 2394-7926

Alara, Oluwaseun Ruth and Nour, A. H. and Ukaegbu, Chinonso Ishmael and Zulkafli, Hassan and Kabbashi, Nassereldeen Ahmed (2018) Dataset on LC-Q-TOF/MS tentative identification of phytochemicals in the extract of Vernonia amygdalina leaf through positive ionization. Data in Brief, 21. pp. 1686-1689. ISSN 2352-3409

Addila, Abu Bakar and Akhtar, Muhammad Nadeem and Norlaily, Mohd Ali and Swee, Keong Yeap and Ching, Kheng Quah and Wan-Sin, Loh and Noorjahan Banu, Alitheen and Seema, Zareen and Ul-Haq, Zaheer and Syed Adnan, Ali Shah (2018) Design, Synthesis and Docking Studies of Flavokawain B Type Chalcones and Their Cytotoxic Effects on MCF-7 and MDA-MB-231 Cell Lines. Molecules, 23 (3). pp. 1-14. ISSN 1420-3049 (print); 1420-3049 (online)

Al-Bashiri, Hael and Abdulgabber, Mansoor Abdullateef and Awanis, Romli and Norazuwa, Salehudin (2018) A Developed Collaborative Filtering Similarity Method to Improve the Accuracy of Recommendations under Data Sparsity. International Journal of Advanced Computer Science and Applications (IJACSA), 9 (4). pp. 135-142. ISSN 2156-5570(Online)

Alim, Samiul and Jaya Vejayan, Palliah and A. K. M., Kafi (2018) Direct Electrochemistry of Catalase Immobilized at Polymerized-SnO2 Multiporous Modified Electrode for an Amperometric H2O2 Biosensor. Biomedical Journal of Scientific and Technical Research, 3 (4). pp. 1-6. ISSN 2574-1241

Ahmad Firdaus, Zainal Abidin and Nor Badrul, Anuar and Ahmad, Karim and Mohd Faizal, Ab Razak (2018) Discovering optimal features using static analysis and a genetic search based method for Android malware detection. Frontiers of Information Technology & Electronic Engineering, 19 (6). pp. 712-736. ISSN 2095-9230

Ahmad, Ifzal and Donia, Magda B. L. and Khan, Asadullah and M., Waris (2018) Do as I say and do as I do? The mediating role of psychological contract fulfillment in the relationship between ethical leadership and employee extra-role performance. Personnel Review. pp. 1-20. ISSN 0048-3486 (In Press)

Ahmad Qushairi, Mohamad and Khan, Ilyas and Lim, Yeou Jiann and Sharidan, Shafie and Zaiton, Mat Isa and Zulkhibri, Ismail (2018) Double convection of unsteady MHD Non-coaxial rotation viscous fluid in a porous medium. Bulletin of the Malaysian Mathematical Sciences Society, 41 (4). pp. 2117-2139. ISSN 0126-6705 (Print); 2180-4206 (Online)

Al-Bashiri, Hael and Awanis, Romli and Abdulgabber, Mansoor Abdullateef and Mohammad Adam Ibrahim, Fakhreldin and Mazlina, Abdul Majid (2018) Eco-design based on collaborative filtering recommender system. Advanced Science Letters, 24 (10). pp. 7703-7706. ISSN 1936-6612

Ahmad, Mani Malam and Abd. Aziz, Mohd Azoddein and Mohammed Saedi, Jami (2018) Eco-friendly Industrial wastewater treatment: Potential of mesophilic bacterium, Pseudomonas putida (ATCC 49128) for hydrogen sulfide oxidation. Journal of Applied Biology & Biotechnology, 6 (3). pp. 53-57. ISSN 2455-7005

Anggono, Willyanto and M. M., Noor and Suprianto, F. D. and Lesmana, L. A. and Gotama, G. J. and Setiyawan, A. (2018) Effect of Cerbera Manghas Biodiesel on Diesel Engine Performance. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (3). pp. 5667-5682. ISSN 2229-8649 (Print); 2180-1606 (Online)

Alara, Oluwaseun Ruth and Nour, A. H. and Siti Kholijah, Abdul Mudalip and Olalere, Olusegun Abayomi (2018) Effect of drying methods on the free radicals scavenging activity of Vernonia amygdalina growing in Malaysia. Journal of King Saud University - Science. pp. 1-5. ISSN 1018-3647 (In Press)

Alajmi, Qasim and Adzhar, Kamaludin and Ruzaini, Abdullah Arshah and Al-Sharafi, Mohammed A. (2018) The Effectiveness of Cloud-Based E-Learning towards Quality of Academic Services: An Omanis’ Expert View. International Journal of Advanced Computer Science and Applications (IJACSA), 9 (4). pp. 158-164. ISSN 2156-5570(Online)

A. A., Mohammed and Bachtiar, Dandi and M. R. M., Rejab and Jiang, X. X. and Abas, Falak O. and Abass, Raghad U. and Hasany, S. F. and Siregar, J. P. (2018) Effects of KMnO4 treatment on the Flexural, Impact, and Thermal properties of sugar palm fiber-reinforced thermoplastic polyurethane composites. JOM, 70 (7). pp. 1326-1330. ISSN 1047-4838

Alara, Oluwaseun Ruth and Nour, A. H. and Siti Kholijah, Abdul Mudalip and Olalere, Olusegun Abayomi (2018) Effects of Microwave-Assisted Extraction Parameters on the Recovery Yield and Total Phenolic Content of Vernonia amygdalina Leaf Extracts with Different Methods of Drying. Jundishapur Journal of Natural Pharmaceutical Products. pp. 1-11. ISSN 1735-7780 (In Press)

Alrubaye, Ali Jamal and Muzamir, Hasan and Fattah, Mohammed Y. (2018) Effects of Using Silica Fume and Lime in the Treatment of Kaolin Soft Clay. Geomechanics and Engineering, 14 (3). pp. 247-255. ISSN 2005-307X(Print), 2092-6219(Online)

Abdelmadjid, Benraghda and Noor Raha, Mohd Radzuan (2018) Engineering Undergraduates’ Self-Assessment in Delivering Technical Oral Presentations in ESL Context. Advanced Science Letters, 24 (1). pp. 537-539. ISSN 1936-6612

Alim, Samiul and A. K. M., Kafi and Rajan, Jose and M. M., Yusoff and Jaya Vejayan, Palliah (2018) Enhanced direct electron transfer of redox protein based on multiporous SnO2 nanofiber-carbon nanotube nanocomposite and its application in biosensing. International Journal of Biological Macromolecules, 114. pp. 1071-1076. ISSN 0141-8130

Aqmal Idham, Abdul Shukor and Asrul, Adam (2018) Evaluation of Design Efficiency using Boothroyd Dewhurst Method for PCB Drilling Machine Products. International Journal of Simulation Systems, Science & Technology, 19 (5). 4.1-4.8. ISSN 1473-8031(Print); 1473-804x (Online)

Azad, Saiful and Rahman, Md. Arafatur and Kabir, M. Nomani (2018) An Expanding Neighbourhood Search Technique for Avalanche Search-and-Rescue Operations using Air Ground Collaborative Wireless Networks. International Journal of Engineering & Technology, 7 (3.7). pp. 500-503. ISSN 2227-524X

Ahmad, Waqar and Zuraina, Ali (2018) An Experimental Investigation on Preparatory Year EFL learners’ Vocabulary achievement through Interactive Whiteboard (IWB). American Journal of Humanities and Social Sciences Research (AJHSSR), 2 (11). pp. 59-65. ISSN 2378-703X

Ahmad Syazwan, Ramli and F., Basrawi and Mohd Hazwan, Yusof and Oumer, A. N. and Nur Azfa, Johari and Azira, Muhamad and Mohd Razif, Mamat and Khairul, Habib and Ibrahim, Thamir Khalil (2018) Experimental analysis on a novel low-temperature vacuum drying with induced nucleation technique for dewatering stingless bees honey. Drying Technology. pp. 1-7. ISSN 0737-3937 (Print) 1532-2300 (Online)

Al-haimi, Basheer and Hamid, A. B. and Hujainah, Fadhl (2018) Factors affecting Yemen higher education institutions performance: Challeneges and obstacles. International Journal of Engineering & Technology, 7 (3.21). pp. 256-260. ISSN 2227-524X

Azad, Saiful and Rahman, Md. Arafatur and Swarna, D.I. and Pathan, Al-Sakib Khan (2018) Finding a suitable hop-to-hop busty traffic transmission approach for underwater acoustic networks: handshake-based vs. handshake-free MAC protocols. International Journal of Ad Hoc and Ubiquitous Computing, 27 (3). pp. 222-231. ISSN 1743-8225 (Print); 1743-8233 (Online)

Aboelazm, Eslam A. A. and Ali, Gomaa A. M. and Algarni, H. and K. F., Chong (2018) Flakes Size-Dependent Optical and Electrochemical Properties of MoS2. Current Nanoscience, 14 (5). pp. 416-420. ISSN 1573-4137 (Print); 1875-6786 (Online)

Al Sayaydeh, Osama Nayel and Shamaileh, Abeer (2018) Fuzzy Min Max Neural Network for pattern classification: An overview of complexity problem. International Journal of Information Technology and Language Studies (IJITLS), 2 (3). pp. 110-117. ISSN 2521-8727

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod (2018) Grid‐connected photovoltaic power plants: A review of the recent integration requirements in modern grid codes. International Journal of Energy Research, 42 (5). pp. 1849-1865. ISSN 0363-907X (print); 1099-114X (online)

Andalib, Tarnima Warda and Mohd Ridzuan, Darun (2018) An HRM Framework for Manufacturing Companies of Bangladesh Mapping Employee Rights’ Protocols and Grievance Management System. Indian Journal of Science and Technology, 11 (17). pp. 1-13. ISSN 0974-6846 (Print); 0974-5645 (Online)

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod (2018) Harmonic distortion and voltage imbalance study of photovoltaic power plant connected to the Malaysian grid. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-2). pp. 1-6. ISSN 2289-8131

Ali, Gomaa A. M. and Barhoum, Ahmed and Gupta, Vinod Kumar and Nada, Amr Ahmed and El-Maghrabi, Heba and K., Ramesh and Shaaban, Essam Ramadan and Algarni, H. and K. F., Chong (2018) High surface area mesoporous silica for hydrogen sulfide effective removal. Current Nanoscience. pp. 1-9. ISSN 1573-4137 (Print); 1875-6786 (Online) (In Press)

Abdullah, Nasser and Kamal Z., Zamli and Alsewari, Abdulrahman A. and Ahmed, Bestoun S. (2018) Hybrid flower pollination algorithm strategies for t-way test suite generation. PLoS ONE, 13 (5). pp. 1-24. ISSN 1932-6203

Ahmad Fakhri, Ab. Nasir and M Nordin, A Rahman and Nashriyah, Mat and Abd Rasid, Mamat and Ahmad Shahrizan, Abdul Ghani (2018) Image pre-processing algorithm for Ficus deltoidea Jack (Moraceae) varietal recognition: a repeated perpendicular line scanning approach. International Journal of Engineering & Technology, 7 (2). pp. 49-53. ISSN 2227-524X

Awad, Omar I. and Obed M., Ali and Hammid, Ali Thaeer and R., Mamat (2018) Impact of fusel oil moisture reduction on the fuel properties and combustion characteristics of SI engine fueled with gasoline-fusel oil blends. Renewable Energy, 123. pp. 79-91. ISSN 0960-1481

Azad, A. K. and Laboni, Farhina Rahman and Rashid, Harun and Ferdous, Sahena and Rashid, Shah Samiur and Nurkhalida, Kamal and Labu, Zubair Khalid and Islam, M. S. and Sarker, Zaidul Islam (2018) In vitro evaluation of Cuscuta reflexa Roxb. forthrombolytic, antioxidant, membrane stabilizingand antimicrobial activities. Natural Product Research: Formerly Natural Product Letters. pp. 1-4. ISSN 1478-6419 (print); 1478-6427 (online) (In Press)

Alaw, Fares Ahmed and Nurul Sa'aadah, Sulaiman and Tan, Hendry (2018) Incorporation of Human Factors in Risk Analysis of Oil and Gas Pipeline Using Bayesian Network. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 4. pp. 1-9. ISSN 0126-8139

Al-Khaleefa, Ahmed Salih and Mohd Riduan, Ahmad and Azmi Awang, Md Isa and Mona Riza, Mohd Esa and Mohammed Al-Saffar, Ahmed Ali and Aljeroudi, Yazan (2018) Infinite-term memory classifier for wi-fi localization based on dynamic Wi-Fi Simulator. IEEE Access, 6. pp. 54769-54785. ISSN 2169-3536

Adeleke, A. Q. and A. Y., Bahaudin and A. M., Kamaruddeen and Bamgbaded, J. A. and Salimon, Maruf Gbadebo and M., Waris and Sorooshian, Shahryar (2018) The Influence of Organizational External Factors on Construction Risk Management among Nigerian Construction Companies. Safety and Health at Work, 9 (1). pp. 115-124. ISSN 2093-7911

Al-Sharafi, Mohammed A. and Ruzaini, Abdullah Arshah and Alajmi, Qasim and Herzallah, Fadi A. and Qasem, Yousef A. M. (2018) The Influence of Perceived Trust on Understanding Banks’ Customers behavior to Accept Internet Banking Services. Indian Journal of Science and Technology, 11 (20). pp. 1-9. ISSN 0974-6846 (Print); 0974-5645 (Online)

Aainaa Izyan, Nafsun and Herz, Fabian and Liu, Xiaoyan (2018) Influence of material thermal properties and dispersity on thermal bed mixing in rotary drums. Powder Technology, 331. pp. 121-128. ISSN 00325910

Akhyari, N. and Ruzaini, Abdullah Arshah and M. R., Abdul Hamid (2018) Information security culture guidelines to improve employee’s security behavior: A review of empirical studies. Journal of Fundamental and Applied Sciences, 10 (2S). pp. 258-283. ISSN 1112-9867

Al Masud, Sheikh Mohammad Maniruzzaman and Rohana, Hamzah (2018) International Migration And Development: A Bangladesh Perspective. European Journal Of Social Sciences Studies, 3 (3). pp. 221-236. ISSN 2501-8590

Abdussalam, Abdalla Geth and Mohd Ridzuan, Darun (2018) Investigating Relationship between Working Capital Management and Capital Structure. Journal of Emerging Issues in Economics, Finance and Banking (JEIEFB), 7 (1). pp. 2466-2478. ISSN 2306-367X

Ayesha, Noor and Yuserrie, Zainuddin and Panigrahi, Shrikant and Faridah, Taju Rahim (2018) Investigating the Relationship among Fit Organization, Organization Commitment and Employee’s Intention to Stay: Malaysian Context. Global Business Review. pp. 1-20. ISSN 0973-0664 (In Press)

A. S., Samsudin and M. A., Saadiah (2018) Ionic conduction study of enhanced amorphous solid bio-polymer electrolytes based carboxymethyl cellulose doped NH4Br. Journal of Non-Crystalline Solids, 497. pp. 19-29. ISSN 0022-3093

Alara, Oluwaseun Ruth and Nour, A. H. (2018) Kinetics studies on effects of extraction techniques on bioactive compounds from Vernonia cinerea leaf. Journal of Food Science and Technology. pp. 1-9. ISSN 0975-8402 (In Press)

Asmawati, Sajari and Hasnah, Haron and Ishak, Ismail and Nur Ain Zakiah, Mohd Yusof and Roszaini, Haniffa (2018) Level of ethics and integrity and internal audit capability: a comparison of two Malaysian public sector organizations. Journal of Governance & Integrity, 1 (2). pp. 83-119. ISSN 2600-7479

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod and Blaabjerg, Frede (2018) Low Voltage Ride-Through Capability Control for Single-Stage Inverter-Based Grid-Connected Photovoltaic Power Plant. Solar Energy, 159. pp. 665-681. ISSN 0038-092X

A. R.A., Azwan and Ahmad Nor Kasruddin, Nasir and Sha'akmal, S. and A.R.M., Sawal (2018) MOSDA: A proposal for multiple objective spiral dynamics algorithm. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-3). pp. 15-19. ISSN 2180-1843 (Print); 2289-8131 (Online)

Aboelazm, Eslam A. A. and Ali, Gomaa A. M. and Algarni, H. and Yin, Huajie and Zhong, Yu Lin and K. F., Chong (2018) Magnetic Electrodeposition of the Hierarchical Cobalt Oxide Nanostructure from Spent Lithium-Ion Batteries: Its Application as a Supercapacitor Electrode. Journal of Physical Chemistry C, 122 (23). pp. 12200-12206. ISSN 1932-7447 (print); 1932-7455 (online)

Al-Saffar, Ahmed Ali Mohammed and Suryanti, Awang and Tao, Hai and Nazlia, Omar and Al-Saiagh, Wafaa and Al-bared, Mohammed (2018) Malay sentiment analysis based on combined classification approaches and Senti-lexicon algorithm. PLoS ONE, 13 (4). pp. 1-18. ISSN 1932-6203

Alara, Oluwaseun Ruth and Nour, A. H. and Siti Kholijah, Abdul Mudalip and Olalere, Olusegun Abayomi (2018) Mathematical modeling of thin layer drying using open sun and shade of Vernonia amygdalina leaves. Agriculture and Natural Resources, 52. pp. 53-58. ISSN 2452-316X

Alara, Oluwaseun Ruth and Nour, A. H. and Siti Kholijah, Abdul Mudalip and Olalere, Olusegun Abayomi (2018) Mathemtical modeling of thin layer drying using open sun and shade of vernonia ameygadalina leaves. Agriculture and Natural Resources, 52 (1). pp. 53-58. ISSN 2452-316X

Alara, Oluwaseun Ruth and Nour, A. H. and Ukaegbu, Chinonso Ishmael and Azhari, H. Nour and Kabbashi, Nassereldeen Ahmed (2018) Metabolic profiling of flavonoids, saponins, alkaloids and terpenoids in the extract from Vernonia cinerea leaf using LC-Q-TOF-MS. Journal Of Liquid Chromatography & Related Technologies, 41 (11). pp. 1-10. ISSN 1520-572X

Afolabi, Haruna Kolawole and Siti Kholijah, Abdul Mudalip and Alara, Oluwaseun Ruth (2018) Microwave-assisted extraction and characterization of fatty acid from eel fish (Monopterus albus). Beni-Suef University Journal of Basic and Applied Sciences, 7 (4). pp. 465-470. ISSN 2314-8535

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod (2018) Modeling and design of photovoltaic power plant connected to the MV side of Malaysian grid with TNB technical regulation compatibility. Electrical Engineering, 100 (4). pp. 2407-2419. ISSN 0948-7921

Alam, A. K. M. Moshiul and Beg, M. D. H. and R. M., Yunus and Mohd Bijarimi, Mat Piah and Fina, M. F. and Maria, K. H. and Mieno, T. (2018) Modification of structure and properties of well-dispersed dendrimer coated multi-walled carbon nanotube reinforced polyester nanocomposites. Polymer Testing, 68. pp. 116-125. ISSN 0142-9418

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2018) A Modified Exponential Score Function for Troubleshooting an Improved Locally Made Offshore Patrol Boat Engine. Journal of Marine Engineering & Technology, 17 (1). pp. 52-58. ISSN 2046-4177 (Print); 2056-8487 (Online)

Almatar, Manaf and Makky, Essam A. and Var, Isıl and Kayar, Begum and Koksal, Fatih (2018) Novel Compounds Targeting InhA for TB Therapy. Pharmacological Reports, 70 (2). pp. 217-226. ISSN 1734-1140

Alara, Oluwaseun Ruth and Nour, A. H. and Olalere, Olusegun Abayomi (2018) Optimization of Microwave-Assisted Extraction of Flavonoids and Antioxidants from Vernonia Amygdalina Leaf using Response Surface Methodology. Food and Bioproducts Processing, 107. pp. 36-48. ISSN 0960-3085

Adeleke, A. Q. and Windapo, Abimbola Olukemi and Bamgbaded, J. A. and Salimon, Maruf Gbadebo and Afolabi, Yakibi Ayodele (2018) Organizational Factors, Construction Risk Management and Government Regulations in Nigerian Construction Companies: Data Screening and Preliminary Analysis. Journal of Governance & Integrity, 1 (2). pp. 135-149. ISSN 2600-7479

Adeleke, A. Q. and A. Y., Bahaudin and A. M., Kamaruddeen (2018) Organizational Internal Factors and Construction Risk Management among Nigerian Construction Companies. Global Business Review, 19 (4). pp. 921-938. ISSN 0973-0664

Awad, Omar I. and R., Mamat and Ibrahim, Thamir K. and Hammid, Ali Thaeer and I. M., Yusri and Mohd Adnin, Hamidi and Humada, Ali Mahmood and Ahmad Fitri, Yusop (2018) Overview of the oxygenated fuels in spark ignition engine: Environmental and performance. Renewable and Sustainable Energy Reviews, 91. pp. 394-408. ISSN 1364-0321

Azlan, Abd. Rahman and Rashidi, Abbas (2018) Persepsi masyarakat terhadap program pengimarahan masjid di Negeri Pahang: satu analisis = The community’s perception towards the mosque activities programs in Pahang: an analysis. International Journal of Humanities, Philosophy and Language, 1 (2). pp. 16-26. ISSN 2600-8270

A., Shah and S., Izman and Siti Nurul Fasehah, Ismail and Mas Ayu, Hassan and R., Daud and Mohammed Rafiq, Abdul Kadir (2018) Physical Vapour Deposition on corrosion resistance: A review. ARPN Journal of Engineering and Applied Sciences, 13 (10). o3515-3523. ISSN 1819-6608

Ahmad Fikri Hadi, Abdul Rahman and Mazrul Nizam, Abu Seman (2018) Polyacrylic-polyethersulfone membrane modified via UV photografting for forward osmosis application. Journal of Environmental Chemical Engineering, 6 (4). pp. 4368-4379. ISSN 2213-3437

Ayodele, Freida Ozavize and Liu, Yao and Hasnah, Haron (2018) Promoting Ethics and Integrity in Management Academic Research: Retraction Initiative. Science and Engineering Ethics. pp. 1-26. ISSN 1353-3452 (Print); 1471-5546 (Online) (In Press)

Ahmed, Hussam Alddin S. and Mohamad Fadli, Zolkipli and Saba, M. Ismail and Alsariera, Yazan A. (2018) Pseudo Random Bits' Generator Based on Tent Chaotic Map and Linear Feedback Shift Register. Advanced Science Letters, 24 (10). pp. 7383-7387. ISSN 1936-6612

Alim, Samiul and Jaya Vejayan, Palliah and M. M., Yusoff and A. K. M., Kafi (2018) Recent uses of carbon nanotubes & gold nanoparticles in electrochemistry with application in biosensing: A review. Biosensors and Bioelectronics, 121. pp. 125-136. ISSN 0956-5663

Alkhateeb, Abdullah N. A. and Liu, Yao and Cheng, Jack Kie (2018) Review of Intellectual Capital Components Research. Journal of Advanced Social Research, 8 (6). pp. 1-14. ISSN 2231-8275

Ahmad Firdaus, Zainal Abidin and Nor Badrul, Anuar and Mohd Faizal, Ab Razak and Targio Hashem, Ibrahim Abaker and Syafiq, Bachok and Sangaiah, Arun Kumar (2018) Root exploit detection and features optimization: Mobile device and blockchain based medical data management. Journal of Medical Systems, 42 (6). pp. 1-23. ISSN 0148-5598

Ahmed, Abdulghani Ali and Mohammed, Mohammed Falah (2018) SAIRF: A similarity approach for attack intention recognition using fuzzy min-max neural network. Journal of Computational Science, 25. pp. 467-473. ISSN 1877-7503

Azrag, M. A. K. and Tuty Asmawaty, Abdul Kadir and Jaber, Aqeel S. (2018) Segment Particle Swarm Optimization Adoption for Large-Scale Kinetic Parameter Identification of Metabolic Network Model. IEEE Access, 6. pp. 78622-78639. ISSN 2169-3536

Alara, Oluwaseun Ruth and Nour, A. H. and Ukaegbu, Chinonso Ishmael (2018) Soxhlet extraction of Phenolic Compounds from Vernonia cinerea leaves ant its antioxidant activity. Journal of Applied Research on Medicinal and Aromatic Plants, 11. pp. 12-17. ISSN 2214-7861

Arulselvi, Uthayakumaran and Hafizoah, Kassim (2018) Student Perceptions on the Effectiveness of Using Tell Me More for Pronunciation Learning. International Journal of Language Education and Applied Linguistics (IJLEAL), 8 (2). pp. 83-91. ISSN 2289-7208 (print); 2289-9294 (online)

Abdul Rahman, Zahari and Puteri Fadzline, Muhamad Tamyez and Noor Azlinna, Azizan and Fariza, Hashim (2018) Student spin-off intentions in malaysian higher educational institutions: Founders’ characteristics and university roles. Journal of Entrepreneurship Education, 21. pp. 1-15. ISSN Print :1098-8394; Online: 528-2651

Al-Emran, Mostafa and Mezhuyev, Vitaliy and Adzhar, Kamaludin (2018) Students’ perceptions towards the integration of knowledge management processes in M-Learning Systems: A preliminary study. International Journal of Engineering Education, 34 (2). pp. 371-380. ISSN 0949-149X

Arman Shah, Abdullah and Izman, Sudin and Siti Nurul Fasehah, Ismail and Mas Ayu, Hassan and R., Daud (2018) Study on adhesion strength of tin coated biomedical ti-13zr-13nb alloy. Jurnal Teknologi (Sciences and Engineering), 80. pp. 27-35. ISSN 0127-9696 (print); 2180-3722 (online)

Ahmad Fikri Hadi, Abdul Rahman and Mazrul Nizam, Abu Seman (2018) Surface Modification Of Polyethersulfone Membrane Via Uv-Grafting for Forward Osmosis Technology. Malaysian Journal of Analytical Sciences, 22 (3). pp. 542-552. ISSN 1394-2506

Anis Sakinah, Zainal Abidin and Kamal, Yusoh and Saidatul Shima, Jamari and Abu Hannifa, Abdullah and Zulhelmi, Ismail (2018) Surface functionalization of graphene oxide with octadecylamine for improved thermal and mechanical properties in polybutylene succinate nanocomposite. Polymer Bulletin, 75 (8). pp. 3499-3522. ISSN 0170-0839(Print); 1436-2449(Online)

Aisyah Hanum, Abu Bakar and Noor Azlinda, Zainal Abidin and Zuraina, Ali and Nursyaheedah, Muhammad Isa and Nor Suhardiliana, Sahar (2018) Teachers’ perceptions of the use of flipped learning approach in learning grammar. Journal Of Global Business And Social Entrepreneurship (GBSE), 4 (13). pp. 66-73. ISSN 2462-1714

Amri Muaz, Azmimurad and Najah, Osman (2018) Technical Vocabulary Size among Engineering Undergraduates According to Field of Study at Universiti Malaysia Pahang. International Journal of Novel Research in Education and Learning, 5 (2). pp. 1-5. ISSN 2394-9686

Al-Emran, Mostafa and Mezhuyev, Vitaliy and Adzhar, Kamaludin (2018) Technology Acceptance Model in M-learning context: A systematic review. Computers & Education, 125. pp. 389-412. ISSN 0360-1315

Atalla, Yousif and Hashim, Yasir and Abdul Nasir, Abd Ghafar (2018) Temperature sensitivity based on channel length of FinFET transistor. Journal of Nanoscience and Technology, 4 (1). pp. 338-341. ISSN 2455-0191

Ahmed, Ehab Ali and Syafiq Fauzi, Kamarulzaman and Gisen, J. I. A. and Zuriani, Mustaffa (2018) Time series forecasting based on wavelet decomposition and correlation feature subset selection. Advanced Science Letters, 24 (10). pp. 7549-7553. ISSN 1936-6612

Ahmad Afif, Mohd Faudzi and Takano, Hirotaka and Murata, Jun'ichi (2018) Transfer learning through policy abstraction using learning vector quantization. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-3). pp. 163-168. ISSN 2180-1843 (Print); 2289-8131 (Online)

Aminullah, A. R. M. and Azmi, W. H. and A. A. M., Redhwan and M. Z., Sharif and Nurul Nadia, Mohd Zawawi and K., Kadirgama and M. N. S., Ashraf (2018) Tribology Investigation of Automotive Air Condition (AAC) Compressor by using Al2O3/PAG Nanolubricant. Journal of Mechanical Engineering, SI 5 (1). pp. 49-61. ISSN 1823-5514

Abdullah Adnan, Mohamed and Adelina, Asmawi (2018) Understanding Engineering Undergraduates’ Technical Oral Presentation: Challenges and Perspectives. International Journal of Language Education and Applied Linguistics (IJLEAL), 8 (1). pp. 41-53. ISSN 2289-7208 (print); 2289-9294 (online)

Azad, Saiful and Casari, Paolo and Zanforlin, Marco and Zorzi, Michèle (2018) Underwater delay-tolerant routing via probabilistic spraying. IEEE Access, 6. pp. 77767-77784. ISSN 2169-3536

Ayodele, Freida Ozavize and Yao, Liu and Hasnah, Haron (2018) University Knowledge Management: proposal for broaden integrative perspective. Journal of Information & Knowledge Management, 17 (3). ISSN 0219-6492 (Print); 1793-6926 (Online)

Ahmad, Iftikhar and Noor Raha, Mohd Radzuan and Hussain, Muhammad Sabboor (2018) Use of First Language in the Classroom: Non-native EFL Teachers’ Beliefs in Teaching English to Adult Learners in Bilingual Context. Arab World English Journal (AWEJ), 9 (2). pp. 186-199. ISSN 2229-9327

Azab, Amira Saad and Ali, Gomaa A. M. and Mohd Azmuddin, Abdullah and Algarni, H. and K. F., Chong (2018) Utilization of Eugenia Caryophyllata Thumb, Piper Nigrum Linn, and Thymus Vulgaris L Extracts on the Fungal-Invaded Limestone of some Monumental Buildings in Cairo, Egypt. Fresenius Environmental Bulletin, 27 (12A). pp. 9213-9221. ISSN 1018-4619

Adeleke, A. Q. and Windapo, Abimbola Olukemi and M., Waris and Bamgbaded, J. A. and Salimon, Maruf Gbadebo and Nawanir, Gusman (2018) Validating the Influence of Effective Communication, Team Competency and Skills, Active Leadership on Construction Risk Management Practices of Nigerian Construction Companies. The Journal of Social Sciences Research (Special 6). pp. 460-465. ISSN 2411-9458

Al-Saiagh, Wafaa and Sabrina, Tiun and Al-Saffar, Ahmed Ali Mohammed and Suryanti, Awang and Al- khaleefa, A. S. (2018) Word sense disambiguation using hybrid swarm intelligence approach. PLoS ONE, 13 (12). pp. 1-19. ISSN 1932-6203

Alsariera, Yazan A. and Ahmed, Hussam Alddin Shihab and Alamri, Hammoudeh S. and Mazlina, Abdul Majid and Kamal Z., Zamli (2018) A bat-inspired testing strategy for generating constraints pairwise test suite. Advanced Science Letters, 24 (10). pp. 7245-7250. ISSN 1936-6612

Ali Turi, Jamshid and Sorooshian, Shahryar and Fatimah, Mahmud and Javed, Yasir (2018) The cognitive, behavioral and social prospectives of organizational learning through information system. Malaysian Online Journal of Educational Management, 6 (3). pp. 68-86. ISSN 2289-4489

Abdullah, Nasser and Kamal Z., Zamli and Alsewari, Abdulrahman A. and Ahmed, Bestoun S. (2018) An elitist-flower pollination-based strategy for constructing sequence and sequence-less t-way test suite. International Journal of Bio-Inspired Computation, 12 (2). pp. 115-127. ISSN 1758-0366

Al-Sharafi, Mohammed A. and Ruzaini, Abdullah Arshah and Herzallah, Fadi A. T. and Abu-Shanab, Emad A. (2018) The impact of customer trust and perception of security and privacy on the acceptance of online banking services: structural equation modeling approach. International Journal of Industrial Management (IJIM), 4. pp. 1-14. ISSN 2289-9286 (Print); 0127-564x (Online)

Al-Emran, Mostafa and Mezhuyev, Vitaliy and Adzhar, Kamaludin and Shaalan, Khaled (2018) The impact of knowledge management processes on information systems: A systematic review. International Journal of Information Management, 43. pp. 173-187. ISSN 0268-4012

Awad, Omar I. and R., Mamat and M. M., Noor and Ibrahim, Thamir K. and I. M., Yusri and Ahmad Fitri, Yusop (2018) The impacts of compression ratio on the performance and emissions of ice powered by oxygenated fuels: A review. Journal of the Energy Institute, 91 (1). pp. 19-32. ISSN 1743-9671

Ayda, Emdadian and Ponnambalam, S. G. and Kanagaraj, G. (2018) An implementation of differential evolution algorithm for a single product and single period multi-echelon supply chain network model. Journal of Modern Manufacturing Systems and Technology, 1. pp. 1-14. ISSN 2636-9575

Al-Bashiri, Hael and Abdulgabber, Mansoor Abdullateef and Awanis, Romli and Kahtan, Hasan (2018) An improved memory-based collaborative filtering method based on the TOPSIS technique. PLoS ONE, 13 (10). pp. 1-26. ISSN 1932-6203

Ali, Mohammed A. H. and Alshamer, Mohammed A. (2018) An intelligent adjustable spanner for automated engagement with multi-diameter bolts/nuts during tightening/loosening process using vision system and fuzzy logic. The International Journal of Advanced Manufacturing Technology. pp. 1-19. ISSN 0268-3768 (Print), 1433-3015 (Online)

Atta, Mohammed Thamir and Awanis, Romli (2018) The mediation effect of intention to use information system on the association between usability and user's satisfaction in UMP. Advanced Science Letters, 24 (10). pp. 7806-7809. ISSN 1936-6612

Alsibai, Mohammed Hayyan and Nurul Nadia, Nor Hamran and Abdul Nasir, Abd Ghafar and Abdul Adam, Abdullah (2018) A monitoring system for EPW safe use. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-2). pp. 131-135. ISSN 2180-1843

Aman, Sidra and Khan, Ilyas and Zulkhibri, Ismail and Mohd Zuki, Salleh and Tlili, I. (2018) A new Caputo time fractional model for heat transfer enhancement of water based graphene nanofluid: An application to solar energy. Results in Physics, 9. pp. 1352-1362. ISSN 2211-3797

A. Ahmed, Hussam and Mohamad Fadli, Zolkipli and Ahmad, Musheer (2018) A novel efficient substitution-box design based on firefly algorithm and discrete chaotic map. Neural Computing and Applications, 30 (171). ISSN 1433-3058

A. R., Zul Rasyied and N. N., Mazlee and M. R., Salim and Hadi, Manap and S., Nurulain (2018) The potential development of oxygen optical fibre gas sensor for automotive industry. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-3). pp. 1-4. ISSN 2180-1843

Al-Mohammad, Mohammad and Omar, Jamaludin (2018) A review of causes of delay in construction projects. International Journal of Engineering & Technology, 7 (4). pp. 5078-5083. ISSN 2227-524X

Al Matar, Manaf and Makky, Essam A. and Isil, Var and Koksal, Fatih (2018) The role of nanoparticles in the inhibition of multidrug-resistant bacteria and biofilms. Current Drug Delivery, 15 (4). pp. 470-484. ISSN 1875-5704

Allahham, Alaa Azmi and Rahman, Md. Arafatur (2018) A smart monitoring system for campus using ZigBee wireless sensor networks. International Journal of Software Engineering & Computer Sciences (IJSECS), 4 (1). pp. 1-14. ISSN 2289-8522

Al Sayaydeh, Osama Nayel and Mohammed, Mohammed Falah and Lim, Chee Peng (2018) A survey of fuzzy min max neural networks for pattern classification: variants and applications. IEEE Transactions On Fuzzy Systems. pp. 1-11. ISSN 1063-6706 (In Press)

Ali, Gomaa A. M. and Megiel, Elzbieta and Romański, Jan and Algarni, H. and K. F., Chong (2018) A wide potential window symmetric supercapacitor by TEMPO functionalized MWCNTs. Journal of Molecular Liquids, 271. pp. 31-39. ISSN 0167-7322

Al-Dhahebi, Adel Mohammed and Ahmad Kadri, Junoh and Zamri, Mohamed and Wan Zuki Azman, Wan Muhamad (2017) A computational approach for optimizing vehicles’ interior noise and vibration. International Journal of Automotive and Mechanical Engineering (IJAME), 44 (4). pp. 4690-4703. ISSN 1985-9325(Print); 2180-1606 (Online)

Ahmad Muhaimin, Ismail and Mohd Saberi, Mohamad and Hairudin, Abdul Majid and Khairul Hamimah, Abas and Safaai, Deris and Zaki, Nazar and Siti Zaiton, Mohd Hashim and Zuwairie, Ibrahim and Muhammad Akmal, Remli (2017) An Improved Hybrid of Particle Swarm Optimization and the Gravitational Search Algorithm to Produce a Kinetic Parameter Estimation of Aspartate Biochemical Pathways. Biosystems, 162. pp. 81-89. ISSN 0303-2647

Ahmad, Iftikhar and Hussain, Muhammad Sabboor and Noor Raha, Mohd Radzuan (2017) Teachers’ Beliefs Versus Learners’ Beliefs In Grammar Teaching: Harmonizing Teaching and Learning for Adult Learners’ Improved Proficiency In English. International Journal of Applied Linguistics & English Literature, 6 (7). pp. 130-142. ISSN 2200-3592 (Print); 2200-3452 (Online)

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and Heim, Hans P. and Feldmann, Maik (2017) Effects of Surface Modification on Dispersion, Mechanical, Thermal And Dynamic Mechanical Properties Of Injection Molded PLA-hydroxyapatite Composites. Composites Part A: Applied Science and Manufacturing, 103. pp. 96-105. ISSN 1359-835X

Abdul Halim, Abdul Razik and Elsholkami, Mohamed and Elkamel, Ali and Simon, Leonardo (2017) Multi-Products Productions from Malaysian Oil Palm Empty Fruit Bunch (EFB): Analyzing Economic Potentials from the Optimal Biomass Supply Chain. Journal of Cleaner Production, 168. pp. 131-148. ISSN 0959-6526 (print), 1879-1786 (online)

Ahmad, Iftikhar and Zahoor Raja, Muhammad Asif and Bilal, Muhammad and Ashraf, Farooq (2017) Neural network methods to solve the Lane–Emden type equations arising in thermodynamic studies of the spherical gas cloud model. Neural Computing and Applications, 28. pp. 929-944. ISSN 0941-0643

Ahmad, Iftikhar and Ahmad, Siraj-ul-Islam and Bilal, Muhammad Qamar and Anwar, Nabeela (2017) Stochastic numerical treatment for solving Falkner–Skan equations using feedforward neural networks. Neural Computing and Applications, 28. pp. 1131-1144. ISSN 0941-0643

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Syahrullail, Samion (2017) Tribological Performance of Modified Jatropha Oil Containing Oil-Miscible Ionic Liquid for Machining Applications. Journal of Mechanical Science and Technology, 31 (12). pp. 5675-5685. ISSN 1976-3824

Abdul Halim, Abdul Razik and Mohd Zulkifli, Mohamad Noor and Muhamad Fariz, Failaka and Elkamel, Marwen and Elkamel, Ali (2017) Utilising biomass for renewable energy production: Optimal profitability evaluation from different processing routes. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3046-3057. ISSN 2289-4659 (print); 2231-8380 (online)

Adel Mohammed, Al-Dhahebi and Ahmad Kadri, Junoh and Zamri, Mohamed and Wan Zuki Azman, Wan Muhamad (2017) A computational approach for optimizing vehicles' interior noise and vibration. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (4). pp. 4690-4703. ISSN 2229-8649 (Print); 2180-1606 (Online)

Aralapura, Yuvaraj Rajkumar and Lutfor, M. R. and M. M., Yusoff and Kular, Sandeep (2017) Photo-Induced Characteristics of Azobenzene Based Gold Nanoparticles. IET Micro & Nano Letters, 12 (3). pp. 201-204. ISSN 1750-0443

Abd Rahman, Zulhishamuddin and Mohamed Suffian, Reza and S. N., Aqida and Mohd Rashidi, Maarof (2017) Microstructural Evolution and Phase Transformation in Laser Cladding of Cr and Mo Powder on Grey Cast Iron: Mixture Design of Experiment (DOE). Materials Research Ibero-american Journal of Materials. pp. 1-7. ISSN ISSN 1516-1439 / ISSN 1980-5373

Abdulhadi, Hassan Abdulrssoul and S. N., Aqida and Izwan, Ismail and M., Ishak and Mohammed, Ghusoon R. (2017) Thermally-Induced Crack Evaluation in H13 Tool Steel. Metals, 7 (11). pp. 475-485. ISSN 2075-4701

A. K. M., Kafi and Wali, Qamar and Rajan, Jose and Biswas, Tapan Kumar and M. M., Yusoff (2017) A Glassy Carbon Electrode Modified With Sno2 Nanofibers, Polyaniline and Hemoglobin for Improved Amperometric Sensing of Hydrogen Peroxide. Microchimica Acta, 184 (11). pp. 4443-4450. ISSN 0026-3672

Ayodele, Bamidele V. and Sureena, Abdullah and Cheng, C. K. (2017) Kinetics and Mechanistic Studies of CO-Rich Hydrogen Production by CH4/CO2 Reforming over Praseodymia Supported Cobalt Catalysts. International Journal of Hydrogen Energy, 42 (47). pp. 28408-28424. ISSN 0360-3199

Ali, Gomaa A. M. and Divyashree, A. and Supriya, S. and Chong, Kwok Feng and Ethiraj, Anita S. and Reddy, M. V. and Algarni, H. and Hegde, Gurumurthy (2017) Carbon Nanospheres Derived from Lablab Purpureus for High Performance Supercapacitor Electrodes: a Green Approach. Dalton Transactions, 46. pp. 14034-14044. ISSN 1477-9226

Alara, Oluwaseun Ruth and Nour, A. H. and Olalere, Olusegun Abayomi (2017) Mathematical modelling and morphological properties of thin layer oven drying of Vernonia amygdalina leaves. Journal of the Saudi Society of Agricultural Sciences. pp. 1-7. ISSN 1658-077X (In Press)

Asmida, Ideris and Croiset, Eric and Pritzker, Mark and Amin, Ashraf (2017) Direct-methane Solid Oxide Fuel Cell (SOFC) with Ni-SDC Anode-Supported Cell. International Journal of Hydrogen Energy 42 (2017) 23118 e23129, 42. pp. 23118-23129. ISSN 0360-3199

Alara, Oluwaseun Ruth and Nour, A. H. and Olalere, Olusegun Abayomi (2017) Ethanolic extraction of flavonoids, phenolics and antioxidants from Vernonia amygdalina leaf using two-level factorial design. Journal of King Saud University - Science. pp. 1-10. ISSN 1018-3647 (In Press)

Alam, Lubna and Mazlin, Mokhtar and Islam, Mir Sujaul (2017) Spatial Variation of the Radioactive Element Polonium-210 in a Coal Burning Power Plant Area of Malaysia. International Journal of Mechanical and Production Engineering (IJMPE), 5 (8). pp. 41-45. ISSN 2320-2092

Ahmad Shahrizan, Abdul Ghani and Mat Isa, Nor Ashidi (2017) Automatic System for Improving Underwater Image Contrast and Color Through Recursive Adaptive Histogram Modification. Computers and Electronics in Agriculture, 141. pp. 181-195. ISSN 0168-1699

Azad, Saiful and Rahman, Md. Arafatur and Asyhari, A. Taufiq and Pathan, Al-Sakib Khan (2017) Crowd Associated Network: Exploiting over a Smart Garbage Management System. IEEE Communications Magazine, 55 (7). pp. 186-192. ISSN 0163-6804

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, Mustafa M. and Samira, A. Kamaruddin and Wan Faizal, Wan Ishak (2017) Assessment of the Behaviour of Soil Structure in Double-Porosity Kaolin Media Using Light Transmission Visualization (LTV) Method. International Journal of Geotechnical Engineering, 11 (3). pp. 316-320. ISSN 1938-6362 (Print) 1939-7879 (Online)

A., Shah and S., Izman and Abdul-Kadir, Mohammed Rafiq and Mas Ayu, Hassan (2017) Influence of Substrate Temperature on Adhesion Strength of TiN Coating of Biomedical Ti-13Zr-13Nb Alloy. Arabian Journal for Science and Engineering, 42 (11). pp. 4737-4742. ISSN 2193-567X

Abdulhadi, Hassan A. and S. N., Aqida and M., Ishak and Mohammed, Ghusoon R. (2017) Fatigue Mechanical Behavior of (PMMA) Poly(methacrylate) Under Shot Peening Treatment. Journal of Computational and Theoretical Nanoscience, 14 (6). pp. 2927-2930. ISSN 1546-1955 (Print); ISSN 1546-1963 (Online)

Al-Sharafi, Mohammed A. and Ruzaini, Abdullah Arshah and Herzallah, Fadi A. T. and Alajmi, Qasim (2017) The Effect of Perceived Ease of Use and Usefulness on Customers Intention to Use Online Banking Services: The Mediating Role of Perceived Trust. International Journal of Innovative Computing, 7 (1 ). pp. 9-14. ISSN 2180-4370

Adnan Mohammed, Hussein and M. M., Noor and K., Kadirgama and D., Ramasamy and M. M., Rahman (2017) Heat Transfer Enhancement Using Hybrid Nanoparticles in Ethylene Glycol Through a Horizontal Heated Tube. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (2). pp. 4183-4195. ISSN 1985-9325(Print); 2180-1606 (Online)

Ahmad, Waqar and Zuraina, Ali and Imtiaz, Taj (2017) The Impact of Smartboard on Preparatory Year EFL Learners' Motivation at a Saudi University. Advances in Language and Literary Studies, 8 (3). pp. 172-180. ISSN 2203-4714

Alrubaye, Ali Jamal and Muzamir, Hasan and Mohammed, Y. Fattah (2017) Stabilization of Soft Kaolin Clay with Silica Fume and Lime. International Journal of Geotechnical Engineering, 11 (1). pp. 90-96. ISSN 1938-6362

Alara, Oluwaseun Ruth and Nour, A. H. and Siti Kholijah, Abdul Mudalip and Olalere, Olusegun Abayomi (2017) Effect of drying methods on the free radicals scavenging activity of Vernonia amygdalina growing in Malaysia. Journal of King Saud University - Science. pp. 1-5. ISSN 1018-3647 (In Press)

Ayodele, Bamidele V. and Khan, Maksudur R. and Cheng, C. K. (2017) Greenhouse Gases Abatement by Catalytic Dry Reforming Of Methane to Syngas over Samarium Oxide-Supported cobalt Catalyst. International Journal of Environmental Science and Technology. pp. 1-14. ISSN 1735-1472(print); 1735-2630(online)

Awad, Omar I. and R., Mamat and Obed M., Ali and Mohd Fahmi, Othman and Abdul Adam, Abdullah (2017) Experimental Study of Performance and Emissions of Fusel Oil-Diesel Blend in a Single Cylinder Diesel Engine. International Journal of Engineering and Technology, 9 (2). pp. 138-142. ISSN 1793-8236

Azad, Saiful and Rahman, Musfiq and Ranak, M. S. A. Noman and Ruhee, B. M. F. Kamal and Nisa, N. Nourin and Kabir, Nazrul and Rahman, Md. Arafatur and Jasni, Mohamad Zain (2017) VAP Code: A Secure Graphical Password for Smart Devices. Computers & Electrical Engineering, 59. pp. 99-109. ISSN 0045-7906

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Syahrullail, Samion (2017) A Review on Ionic Liquids as Sustainable Lubricants in Manufacturing and Engineering: Recent Research, Performance, and Applications. Journal of Cleaner Production, 168. pp. 1571-1589. ISSN 0959-6526

Abhilash, K. P. and Selvin, P. Christopher and Nalini, B. and Rajan, Jose and Vijayaraghavan, R. and Chowdari, B. V. R. and Adams, S. and Reddy, M. Venkatashamy (2017) Investigations on the Influence of Sm3+Ion on the Nano TiO2 Matrix as the Anode Material for Lithium Ion Batteries. Journal of Alloys and Compounds, 710. pp. 205-215. ISSN 0925-8388 (print); 1873-4669 (online)

Abid, Hussanan and Mohd Zuki, Salleh and Sharidan, Shafie and Khan, Ilyas (2017) Convection Heat Transfer in Micropolar Nanofluids with Oxide Nanoparticles in Water, Kerosene and Engine Oil. Journal of Molecular Liquids, 229. pp. 482-488. ISSN 0167-7322

Adnan M., Husein and Dawood, H. K. and R. A., Bakar and K., Kadirgama (2017) Numerical Study on Turbulent Forced Convective Heat Transfer Using Nanofluids TiO2 in an Automotive Cooling System. Case Studies in Thermal Engineering, 9. pp. 72-78. ISSN 2214-157X

Anisah Sajidah, Haji Saud and Mohd Hasbi, Ab. Rahim and Mior Ahmad Khushairi, Mohd Zahari (2017) Synthesis of Sugar Carbonate: A Brief Review. Global Journal of Advanced Research, 4 (2). pp. 37-43. ISSN 2394-5788

Abdul Sahli, Fakharudin and Md Nasir, Sulaiman and Norwati, Mustapha (2017) Modelling Of Biogas Production From Banana Stem Waste With Neural Networks Learning Strategies To Optimse The Production. Journal of Theoretical and Applied Information Technology, 95 (2). pp. 285-291. ISSN 1992-8645(print); 817-3195(online)

Aman, Sidra and Khan, Ilyas and Zulkhibri, Ismail and Mohd Zuki, Salleh and Alshomrani, Ali Saleh and Alghamdi, Metib Said (2017) Magnetic Field Effect on Poiseuille Flow and Heat Transfer of Carbon Nanotubes along a Vertical Channel Filled with Casson Fluid. AIP Advances, 7 (1). pp. 1-18. ISSN 2158-3226

Alavi, Sayed Qasim and Hussanan, Abid and Abdul Rahman, Mohd Kasim and Norhayati, Rosli and Mohd Zuki, Salleh (2017) MHD Stagnation Point flow Towards an Exponentially Stretching Sheet with Prescribed wall Temperature and Heat Flux. International Journal of Applied and Computational Mathematics, 3 (4). pp. 3511-3523. ISSN 2199-5796

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Abdollah, Mohd Fadzli and R., Mamat and Alias, Azri (2017) Effect of vaned diffuser on the performance of small turbocharger. Journal of Mechanical Engineering, SI (1). pp. 227-236. ISSN 1823-5514

Al-Emran, Mostafa and Shaalan, Khaled (2017) Academics’ Awareness towards Mobile Learning in Oman. International Journal of Computing and Digital Systems, 6 (1). pp. 1-7. ISSN 2210-142X

Abdulbari, Hayder A. and Mohamad Amran, Mohd Salleh and Rashed, Musaab K. and M. Halim Shah, Ismail (2017) The Effect of Passive-Active Interaction Method on Drag Reduction Performance in Rotating Disk Apparatus. Indian Journal of Science and Technology, 10 (2). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

Abdul Wahab, Mohammad and Sunarti, Abd Rahman (2017) Influence of PVDF/Pebax TFC Casting Temperature towards CO2/N2 Gas Separation. Indian Journal of Science and Technology, 10 (2). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

Azrina, M. Ralib and Fatimah, Dzaharudin and Mohd Basri, Mat Nor (2017) 025 Estimates of glomerular filtration rate in the critically ill with sepsis. Kidney International Reports, 2 (4 Supp). pp. 33-34. ISSN 2468-0249

Alsewari, Abdulrahman A. and Alazzawi, Ammar K. and Rassem, Taha H. and M. Nomani, Kabir and Homaid, Ameen A. Ba and Alsariera, Yazan A. and Tairan, Nasser M. and Kamal Z., Zamli (2017) ABC Algorithm for Combinatorial Testing Problem. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (3-3). pp. 85-88. ISSN 2180-1843

Azizan, Ramli and Mohamad Ezuan, Abdul Jalil (2017) Addressing the Practice of Safety Management in Halal Industry - An Overview and A Step Towards Sustainable Cooperation. International Journal of Engineering Technology And Sciences (IJETS), 8 (1). pp. 1-15. ISSN 2289-697X

Abdul Adam, Abdullah and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin and Herzwan, Hamzah and Mohd Fahmi, Othman and Mrwan, Anes Abdulla G. (2017) Analysis of Combustion Characteristics, Engine Performance and Exhaust Emissions of Diesel Engine Fueled with Upgraded Waste Source Fuel. International Journal of Hydrogen Energy, 42 (28). pp. 17993-18004. ISSN 0360-3199

Aikhuele, Daniel Osezua and Sorooshian, Shahryar and Ansah, Richard Hannis and Faiz, Mohd Turan (2017) Application Of Intuitionistic Fuzzy Topsis Model For Troubleshooting An Offshore Patrol Boat Engine. Polish Maritime Research, 24 (2). pp. 68-76. ISSN 2083-7429

Almatar, Manaf and Eldeeb, Mohamed and Makky, Essam A. and Koksal, Fatih (2017) Are There Any Other Compounds Isolated from Dermacoccus spp at All? Current Microbiology, 17 (1). pp. 132-144. ISSN 0343-8651 (print); 1432-0991 (online)

Alazzawi, Ammar K. and Homaid, Ameen A. Ba and Alomoush, Alaa A. and Alsewari, Abdulrahman A. (2017) Artificial Bee Colony Algorithm for Pairwise Test Generation. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (1-2). pp. 103-108. ISSN 2180-1843(print); 2289-8131(online)

Ali, Jahan and Hasan, Munirul and M. Nomani, Kabir and Alginahi, Yasser M. (2017) Assessment of Wireless Technologies for deployment in Intelligent Transportation System based on Internet of Things. I O R Journal Of Computer Science &, Information Technology, 1 (1). pp. 1-7.

Ahmed, Abdulghani Ali and Noorul Ahlami, Kamarul Zaman (2017) Attack Intention Recognition: A Review. International Journal of Network Security, 19 (2). pp. 244-250. ISSN 1816-353X (Print); 1816-3548 (Online)

A., Jamaludin and C. K. M., Faizal (2017) Autoclave-Assisted Synthesis of Silver Nanoparticles using Metroxylon Sagu for Antibacterial Application. Indian Journal of Science and Technology, 10 (6). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

Al-Btoush, Mohammed A. KA. and Ahmad Tarmizi, Haron (2017) Barriers and Challenges of Building Information Modelling Implementation in Jordanian Construction Industry. Global Journal of Engineering Science and Research Management, 4 (9). pp. 9-20. ISSN 2349-4506

Al-Fakih, Kamal Ahmed and Chin, Siew Choo and Doh, Shu Ing (2017) Behavior Study of Top Seat Angle Steel Beam to Column Connections. Journal of Engineering and Applied Sciences, 12 (24). pp. 7539-7547. ISSN 1816-949x (Print); 1818-7803 (Online)

Amira Fatiha, Baharudin and Noor Azida, Sahabudin and Adzhar, Kamaludin (2017) Behavioral Tracking in E-Learning by Using Learning Styles Approach. Indonesian Journal of Electrical Engineering and Computer Science, 8 (1). pp. 17-26. ISSN 2502-4752

Ahmad, Firdaus and Nor Badrul, Anuar and Mohd Faizal, Ab Razak and Sangaiah, Arun Kumar (2017) Bio-Inspired Computational Paradigm for Feature Investigation and Malware Detection: Interactive Analytics. Multimedia Tools and Applications. pp. 1-37. ISSN 1380-7501(print); 1573-7721(online)

A., Abu Bakar and M. K. F., Mohd Ali and N., Md Noor and N., Yahaya and M., Ismail and Arman, Abdullah (2017) Bio-corrosion of Carbon Steel by Sulfate Reducing Bacteria Consortium In Oil and Gas Pipelines. Journal of Mechanical Engineering and Sciences (JMES) , 11 (2). pp. 2592-2600. ISSN 2289-4659 (print); 2231-8380 (online)

Ahmad, M. M. and Abdul Aziz, Mohd Azoddein and Mior Ahmad Khushairi, Mohd Zahari and Mazrul Nizam, Abu Seman and Jami, M. S. (2017) Biological Sulfide Oxidation and Its Impact on Cell Biomass Synthesis by Mesophilic Bacterium Bacillus Cerues (ATCC 14579). Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 1 (1). pp. 83-96. ISSN 0126-8139

Awad, Omar I. and R., Mamat and F., Yusop and M. M., Noor and I. M., Yusri (2017) By-Product Alcohol: Fusel Oil as an Alternative Fuel in Spark Ignition Engine. International Journal of Transport and Vehicle Engineering, 4 (6). p. 267.

Awad, Omar I. and R., Mamat and Thamir K., Ibrahim and Hagos, F. Y. and M. M., Noor and I. M., Yusri and A. M., Leman (2017) Calorific Value Enhancement of Fusel Oil by Moisture Removal and Its Effect on the Performance and Combustion of a Spark Ignition Engine. Energy Conversion and Management, 137. pp. 86-96. ISSN 0196-8904

Ali, Gomaa A. M. and Ellie Yi, Lih Teo and Aboelazm, Eslam A. A. and Sadegh, Hamidreza and Memar, Amir O. H. and Shahryari-Ghoshekandi, Ramin and K. F., Chong (2017) Capacitive Performance of Cysteamine Functionalized Carbon Nanotubes. Materials Chemistry and Physics, 197. pp. 100-104. ISSN 0254-0584

Abd Rashid, Abd Aziz and Anbese, Yohannes Tamirat and Hagos, F. Y. and Heikal, Morgan R. and Firmansyah, F. (2017) Characteristics of Early Flame Development in a Direct-Injection Spark-Ignition CNG Engine Fitted with a Variable Swirl Control Valve. Energies, 10 (7). pp. 1-16. ISSN 1996-1073

Al-Bashiri, Hael and Abdulgabber, Mansoor Abdullateef and Awanis, Romli and Hujainah, Fadhl (2017) Collaborative Filtering Recommender System: Overview and Challenges. Advanced Science Letters, 23 (9). pp. 9045-9049. ISSN 1936-6612

A. A. M., Redhwan and W. H., Azmi and M. Z., Sharif and R., Mamat and Nurul Nadia, Mohd Zawawi (2017) Comparative Study of Thermo-physical Properties of SiO2 and Al2O3 Nanoparticles Dispersed in PAG Lubricant. Applied Thermal Engineering, 116. pp. 823-832. ISSN 1359-4311

Albashir, Walid Ali and Yuserrie, Zainuddin and Panigrahi, Shrikant (2017) Conceptual Framework on Usage of Islamic Banking amongst Banking Customers in Libya. International Journal of Innovation and Business Strategy (IJIBS), 7 (1). pp. 10-17. ISSN 2232-044X

A. K. M., Kafi and M. M., Yusoff and Choucair, Mohammad and Crossley, Maxwell J. (2017) A Conductive Crosslinked Graphene/Cytochrome C Networks for The Electrochemical and Biosensing Study. Journal of Solid State Electrochemistry, 21 (10). pp. 2761-2767. ISSN 1433-0768

Ahmed, Bestoun S. and Kamal Z., Zamli and Afzal, Wasif and Bures, Miroslav (2017) Constrained Interaction Testing: A Systematic Literature Study. IEEE Access, PP (99). pp. 1-26. ISSN 2169-3536

Ansah, Richard Hannis and Sorooshian, Shahryar and Shariman, Mustafa and Oluyinka, Oludapo Samson (2017) Constructions Project Management Risks’ Framework. Quality - Access to Success, 18 (158). pp. 90-95. ISSN 1582-2559

Asif, Muhammad and Hai, Faisal I. and Singh, Lakhveer and Price, William E. and Nghiem, Long D. (2017) Degradation of Pharmaceuticals and Personal Care Products by White-Rot Fungi - A Critical Review. Current Pollution Reports, 3 (2). pp. 88-103. ISSN 2198-6592

Ahmad Rosli, Abdul Manaf and Sugiyama, Tsunetoshi and Yan, Jiwang (2017) Design and Fabrication of Si-HDPE Hybrid Fresnel Lenses for Infrared Imaging Systems. Optics Express, 25 (2). pp. 1202-1220. ISSN 1094-4087

Al Adresi, Alaeldeen and Mohd Ridzuan, Darun (2017) Determining relationship between strategic human resource management practices and organizational commitment. International Journal of Engineering Business Management, 9. pp. 1-9. ISSN 1847-9790

Aminuddin, Azfar and Mohd Akmal, Azhar (2017) Development and Evaluation of Goat Milk Tablet Using Dry Granulation Techniques for Nutraceutical Purposes. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-7. ISSN 2289-697X

Amri, Mohamad and Yuserrie, Zainuddin and Alam, Nafis and Kendall, Graham (2017) Does Decentralized Decision Making Increase Company Performance Through Its Information Technology Infrastructure Investment? International Journal of Accounting Information Systems, 27. pp. 1-15. ISSN 1467-0895

Awad, Omar I. and R., Mamat and Obed M., Ali and I. M., Yusri and Abdul Adam, Abdullah and Ahmad Fitri, Yusop and M. M., Noor (2017) The Effect of Adding Fusel Oil to Diesel On the Performance and the Emissions Characteristics in a Single Cylinder CI Engine. Journal of the Energy Institute, 90 (3). pp. 382-396. ISSN 1743-9671

Alghail, Adnan Ali and Liu, Yao and Cheng, Jack Kie and Alkawsi, Jamal (2017) The Effect of Knowledge Management Capabilities on Project Management Success. International Journal of Business Management (IJBM), 2 (2). pp. 1-12. ISSN 0127-9815 (Print); 0127-9890 (Online)

Ansah, Richard Hannis and Sorooshian, Shahryar (2017) Effect of Lean Tools to Control External Environment Risks of Construction Projects. Sustainable Cities and Society, 32. pp. 348-356. ISSN 2210-6707

Abdul Aziz, Mohd Azoddein and R. M., Yunus and Nik Meriam, Nik Sulaiman and Ahmad Bazli, Bustary and Faten Ahada, Mohd Azli and Suzana, Che Sayuti (2017) Effect of Mercury concentration on P. putida growth in Mercury removal. Journal of Applied and Physical Sciences, 3 (3). pp. 107-116. ISSN 2414-3103

A. A., Mohammed and Bachtiar, Dandi and M. R. M., Rejab and S. F., Hasany (2017) Effect of Potassium Permanganate on Tensile Properties of Sugar Palm Fibre Reinforced Thermoplastic Polyurethane. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846(print); 0974-5645(online)

Atta, Mohammed Thamir (2017) The Effect of Usability and Information Quality on Decision Support Information System (DSS). Arts and Social Sciences Journal, 8 (2). pp. 1-4. ISSN 2151-6200

Adekiigbe, Adebanjo and Ahmed, Abdulghani Ali and Sadiq, Ali Safa and Ghafoor, Kayhan Zrar and Kamalrulnizam, Abu Bakar (2017) An Efficient Cluster Head Election Algorithm for Client Mesh Networks using Fuzzy Logic Control. Journal of Internet Technology, 18 (5). pp. 1057-1067. ISSN 1607-9264

Abdul Kadhim, Wafaa and Mohd Asyrak, Deraman and Syamsul Bahari, Abdullah and Saiful Nizam, Tajuddin and M. M., Yusoff and Yun Hin, Taufiq-Yap and Mohd Hasbi, Ab. Rahim (2017) Efficient and Reusable Iron-Zinc Oxide Catalyst for Oxidative Desulfurization of Model Fuel. Journal of Environmental Chemical Engineering, 5 (2). pp. 1645-1656. ISSN 2213-3437

Abdulbari, Hayder A. and Basheer, Esmail A. M. (2017) Electrochemical Biosensors: Electrode Development, Materials, Design, and Fabrication. ChemBioEng Reviews, 4 (2). pp. 92-105. ISSN 2196-9744

Abdulbari, Hayder A. and Mahammed, Hassan D. and Zulkefli, Yaacob and Mahmood, Wafaa K. (2017) Elucidation of Longitudinally Grooved-Riblets Drag Reduction Performance using Pressure Drop Measurements. International Journal of Fluid Mechanics Research, 44 (2). pp. 131-153. ISSN 2152-5102

Ashwinder, Chelliah and Malini, Subramaniam and Gupta, Ritu and Gupta, Arun (2017) Evaluation on the Thermo-Oxidative Degradation of PET using Prodegradant Additives. Indian Journal of Science and Technology, 10 (6). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

Abdolbaqi, Mohammed Khdher and R., Mamat and Nor Azwadi, Che Sidik and Azmi, W. H. and Selvakumar, P. (2017) Experimental investigation and development of new correlations for heat transfer enhancement and friction factor of BioGlycol/water based TiO2 nanofluids in flat tubes. International Journal of Heat and Mass Transfer, 108. pp. 1026-1035. ISSN 0017-9310

Ahmad, Hussain and Fatmawati, Latada and Shah, Sayyed Rashid and Muhammad Nubli, Abdul Wahab (2017) Exploring the Construction of Professional Selves of Non-native EFL Teachers at a Saudi Arabian University. Arab World English Journal (AWEJ), 8 (4). pp. 148-166. ISSN 2229-9327

Abdussalam, Abdalla Geth and Mohd Ridzuan, Darun (2017) Exploring the Relationship between Working Capital Management, Profitability and Capital Structure. Accounting and Finance Review, 2 (1). pp. 38-45. ISSN 0128-2611

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2017) An Exponential-Related Function for Decision-Making In Engineering and Management. Open Engineering, 7 (1). pp. 153-160. ISSN 2081‐9927

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2017) Extended TOPSIS Model for Solving Multi-Attribute Decision Making Problems in Engineering. Decision Science Letters, 6. pp. 365-376. ISSN 1929-5804 (Print); 1929-5812 (Online)

Azhari, H. Nour and Sook, S. Yap and Nour, A. H. (2017) Extraction And Chemical Compositions of Ginger (Zingiber Officinale Roscoe) Essential Oils As Cockroaches Repellent. Australian Journal of Basic and Applied Sciences, 11 (3). pp. 1-8. ISSN 1991-8178

A. K. M., Kafi and N. S., Azmi and M. M., Yusoff and Crossley, Maxwell J. (2017) Fabrication of 3-Dimensional Cross-linked Redox Enzyme/Nanomaterials. Procedia Technology, 27. pp. 201-202. ISSN 2212-0173

Ahmad Fakhri, Ab. Nasir and M. Nordin, A. Rahman and Nashriyah, Mat and A. Rasid, Mamat and Ahmad Shahrizan, Abdul Ghani (2017) Ficusdeltoidea (Jack) Moraceae Varietal Identification Using Statistical Recognition Approach. World Applied Sciences Journal. pp. 82-88. ISSN 1818-4952

Al-Fakih, K. and Chin, Siew Choo and Doh, Shu Ing (2017) Finite Element Analysis of Beam to Column Bolted Connection - A Review. Indian Journal of Science and Technology, 10 (8). pp. 1-9. ISSN 0974-6846 (Print); 0974-5645 (Online)

Azmi, W. H. and N. A., Usri and R., Mamat and K. V., Sharma and M. M., Noor (2017) Force Convection Heat Transfer of Al2O3 Nanofluids for Different Based Ratio of Water: Ethylene Glycol Mixture. Applied Thermal Engineering, 112. pp. 707-719. ISSN 1359-4311

Azrag, M. A. K. and Tuty Asmawaty, Abdul Kadir and Odili, Julius Beneoluchi and Essam, M. H. A. (2017) A Global African Buffalo Optimization. International Journal of Software Engineering & Computer Sciences (IJSECS), 3. pp. 138-145. ISSN 2289-8522

Anthony Jr, Bokolo and Mazlina, Abdul Majid and Awanis, Romli (2017) A Green information technology governance framework for eco-environmental risk mitigation. Progress in Industrial Ecology, 11 (1). pp. 30-48. ISSN 14768917

Anthony Jr, Bokolo and Mazlina, Abdul Majid and Awanis, Romli (2017) Green information technology system practice for sustainable collaborative enterprise: A structural literature review. International Journal of Sustainable Society, 9 (3). pp. 242-272. ISSN 17562538

Ahmed, Bestoun S. and Gambardella, Luca M. and Afzal, Wasif and Kamal Z., Zamli (2017) Handling Constraints in Combinatorial Interaction Testing in the Presence of Multi Objective Particle Swarm and Multithreading. Information and Software Technology, 86. pp. 20-36. ISSN 0950-5849

Amirul Edham, Roslee and Saifful Kamaluddin, Muzakir and Jamil, Ismail and M. M., Yusoff (2017) A Heat Capacity Model of T3/2 Dependence for Quantum Dots. Physical Chemistry Chemical Physics, 19 (1). pp. 408-418. ISSN 1463-9076 (print), 1463-9084 (online)

Aman, Sidra and Khan, Ilyas and Zulkhibri, Ismail and Mohd Zuki, Salleh and Al-Mdallal, Qasem M. (2017) Heat Transfer Enhancement in Free Convection Flow of CNTs Maxwell Nanofluids with Four Different Types of Molecular Liquids. Scientific Reports, 7 (2445). pp. 1-13. ISSN 2045-2322

Ahmad Qushairi, Mohamad and Khan, Ilyas and Lim, Yeou Jiann and Sharidan, Shafie and Zaiton, Mat Isa and Zulkhibri, Ismail (2017) Heat Transfer on Rotating Second Grade Fluid Through an Accelerated Plate. Malaysian Journal of Fundamental and Applied Sciences, 13 (3). pp. 218-222. ISSN 2289-599x

Abdulbari, Hayder A. and Fiona Ling, Wang Ming (2017) Hibiscus Mucilage for Enhancing the Flow in Blood-Stream-Like Microchannel System. Chemical Engineering Communications, 204 (11). pp. 1282-1298. ISSN 1563-5201

Ali, Gomaa A. M. and M. M., Yusoff and Shaaban, Essam R. and Chong, Kwok Feng (2017) High Performance MnO2 Nanoflower Supercapacitor Electrode by Electrochemical Recycling of Spent Batteries. Ceramics International, 43 (11). pp. 8440-8448. ISSN 0272-8842

Ahmad, Waqar and Zuraina, Ali and Sipra, Muhammad Aslam and Taj, Imtiaz Hassan (2017) The Impact of Smartboard on Preparatory Year EFL Learners’ Motivation at a Saudi University. Advances in Language and Literary Studies, 8 (3). pp. 172-180. ISSN 2203-4714

Ali Turi, Jamshid and Muhammad Faizal, A. Ghani and Sorooshian, Shahryar and Abbas, Qaiser (2017) The Impact of Socio-Emotional Intelligence Training on Teacher's Performance. Global Business and Economics Research Journal, 6 (2). pp. 18-31. ISSN 2302-4593

Awad, Omar I. and R., Mamat and M. M., Noor and F., Yusop and I. M., Yusri (2017) The Impacts of Moisture Content on Performance and Emissions of a Four-Cylinder SI Engine Running with Fusel Oil-Gasoline Blends. WSEAS Transactions on Environment and Development, 13. pp. 120-128. ISSN 1790-5079 (print); 2224-3496 (online)

Adeleke, A. Q. and A. Y., Bahaudin and A. M., Kamarudeen and Bamgbaded, J. A. and Salimon, Maruf Gbadebo (2017) The Implications of Political Factor on Construction Risk Management: The Perspectives of Construction Companies in Nigerian. International Journal of Organization & Business Execellence, 2 (1). pp. 100-110. ISSN 2504-8589

Alghail, Adnan Ali and Liu, Yao and Cheng, Jack Kie (2017) Importance of Project-oriented Organizational Culture in Knowledge Management Processes. Global Journal For Research Analysis (GJRA), 6 (6). pp. 400-403. ISSN 2277-8160

Ahmad Rosli, Abdul Manaf and Jiwang, Yan (2017) Improvement of Form Accuracy and Surface Integrity of Si-HDPE Hybrid Micro-Lens Arrays in Press Molding. Precision Engineering, 47. pp. 469-479. ISSN 0141-6359

Asrul, Adam and Zuwairie, Ibrahim and Norrima, Mokhtar and Mohd Ibrahim, Shapiai and Cumming, Paul and Marizan, Mubin (2017) Improving EEG Signal Peak Detection Using Feature Weight Learning of a Neural Network with Random Weights for Eye Event-Related Applications. Sadhana, 42 (5). pp. 1-13. ISSN 0256-2499(print); 0973-7677(online)

Al-Sharifi, H. A. M. and Abdul Rahman, Mohd Kasim and L. A., Aziz and Mohd Zuki, Salleh and S., Shafie (2017) Influence of Aligned Magneto Hydrodynamic of Jeffrey Fluid across a Stretching Sheet. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

Alazaiza, Motasem Y. D. and Ngien, S. K. and Mustafa, M. Bob and Samira, A. Kamaruddin and Wan Faizal, Wan Ishak (2017) Influence of Macro-pores on DNAPL Migration in Double-Porosity Soil Using Light Transmission Visualization Method. Transport in Porous Media, 117 (1). pp. 103-123. ISSN 0169-3913

Abdulbari, Hayder A. and Fiona Ling, Wang Ming and Wafaa, Kamil Mahmood (2017) Insoluble Additives for Enhancing a Blood-Like Liquid Flow in Micro-Channels. Journal of Hydrodynamics, Ser. B, 29 (1). pp. 144-153. ISSN 1001-6058

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2017) An Integrated Fuzzy Dephi and Interval-Valued Intuitionistic Fuzzy M-Topsis Model for Design Concept Selection. Pakistan Journal of Statistics and Operation Research, 13 (2). pp. 425-438. ISSN 2220-5810

Aini, Ahmad and Norrihan, Sulan and Anita, Abdul Rani (2017) Integration Of Learning Organization Ideas And Islamic Core Values Principle At University. The Learning Organization, 24 (6). pp. 392-400. ISSN 0969-6474

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof (2017) An Intelligent Robust Control of Wheeled Mobile Robot in Restricted Environment. International Journal of Control Systems and Robotics, 2. pp. 6-11. ISSN 2367-8917

Aikhuele, Daniel Osezua and Faiz, Mohd Turan and Odofin, S. M. and Ansah, Richard Hannis (2017) Interval-Valued Intuitionistic Fuzzy Topsis-Based Model For Troubleshooting Marine Diesel Engine Auxiliary System. International Journal Maritime Engineering, 159 (Pt. A1). pp. 107-114. ISSN 1479-8751

Abdulbari, Hayder A. and Basheer, Esmail Abdullah Mohammed (2017) Investigating the Enhancement of Microfluidics-Based Electrochemical Biosensor Response with Different Microchannel Dimensions. Current Analytical Chemistry, 13 (5). pp. 361-369. ISSN 1573-4110

Abdul Fattah, Mohd Tahir and S. N., Aqida (2017) An Investigation of Laser Cutting Quality Of 22MnB5 Ultra High Strength Steel Using Response Surface Methodology. Optics & Laser Technology, 92. pp. 142-149. ISSN 0030-3992

A. Y., Adam and A. N., Oumer and Azri, Alias and M., Ishak and M. M., Noor (2017) Investigation of Thermal-Hydraulic Performance in Flat Tube Heat Exchangers at Various Tube Inclination Angles. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (3). pp. 4542-4560. ISSN 1985-9325(Print); 2180-1606 (Online)

Ahmed, M. M. and Nor Ashidi, Mat Isa (2017) Knowledge Base to Fuzzy Information Granule: A Review from the Interpretability-Accuracy Perspective. Applied Soft Computing, 54. pp. 121-140. ISSN 1568-4946 (print); 1872-9681 (online)

Alqadami, Abdulrahman Shueai Mohsen and Ping, Jack Soh and Sharul Kamal, Abdul Rahim and Narbudowicz, Adam and Mohd Faizal, Jamlos (2017) Left-handed Compact MIMO Antenna Array based on Wire Spiral Resonator for 5-GHz Wireless Applications. Applied Physics A, 123 (64). pp. 1-5. ISSN 0947-8396(print); 1432-0630(online)

Amran, Umarul Imran and Arshad, Ahmad and Mohamad Rizza, Othman (2017) Life Cycle Assessment of Simulated Hydrogen Production by Methane Steam Reforming. Australian Journal of Basic and Applied Sciences, 11 (3). pp. 43-50. ISSN 1991-8178

Azizuddin, Abd Aziz and Daisuke, Sumiyoshi and Yasunori, Akashi (2017) Low Cost Humidity Controlled Air-Conditioning System for Building Energy Savings in Tropical Climate. Journal of Building Engineering, 11. pp. 9-16. ISSN 2352-7102

Ainul Azila, Che Fauzi and Noraziah, Ahmad and Tutut, Herawan and Z., Abdullah and Gupta, Ritu (2017) Managing Fragmented Database Using BVAGQ-AR Replication Model. Advanced Science Letters, 23 (11). pp. 11088-11091. ISSN 1936-6612

Ahmad, Mani Malam and Abdul Aziz, Mohd Azoddein and Mior Ahmad Khushairi, Mohd Zahari and Mazrul Nizam, Abu Seman and Mohammad Saedi, Jami (2017) Microbial Interactions in Response to Sulfide Effect on Mesophilic Bacterial Mixed Culture (BMC) Growth. Journal of Advanced Research in Materials Science, 30 (1). pp. 10-20. ISSN 2289-7992

Alqadami, Abdulrahman Shueai Mohsen and Mohd Faizal, Jamlos and Ping, Jack Soh and Sharul Kamal, Abdul Rahim and Vandenbosch, Guy A. E. and Narbudowicz, Adam (2017) Miniaturized Dual-band Antenna Array with Double-negative (DNG) Metamaterial for Wireless Applications. Applied Physics A, 123 (22). pp. 1-5. ISSN 0947-8396 (Print) 1432-0630 (Online)

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod (2017) Modeling and Control of Grid-Connected Photovoltaic Power Plant With Fault Ride-Through Capability. Journal of Solar Energy Engineering, 140 (2). pp. 1-8. ISSN 0199-6231 (print); 1528-8986 (online)

Atnaw, Samson M. and Shaharin, A. Sulaiman and Singh, Lakhveer and Zularisam, A. W. and Wan Faizal, Wan Ishak (2017) Modeling and Parametric Study for Maximizing Heating Value of Gasification Syngas. BioResources, 12 (2). pp. 2548-2564. ISSN 1930-2126 (print); 1930-2126 (online)

Allahham, Alaa Azmi and Mohammed, Muamer N. (2017) A Modified Route Discovery Approach For Dynamic Source Routing (DSR) Protocol In Mobile Ad-Hoc Networks. International Journal of Software Engineering and Computer Systems (IJSECS), 3. pp. 17-30. ISSN 2289-8522

Alqadami, Abdulrahman Shueai Mohsen and Mohd Faizal, Jamlos and Imtiaz, Islam and Soh, Ping Jack and R., Mamat and Khairi, Khairil A. and Narbudowicz, Adam Z (2017) Multi-band antenna array based on double negative metamaterial for multi automotive applications. Progress In Electromagnetics Research (PIER), 159. pp. 27-37. ISSN 1070-4698 (print); 1559-8985 (online)

Asmida, Ideris and Croiset, Eric and Pritzker, Mark (2017) Ni-samaria-doped Ceria (Ni-SDC) Anode-supported Solid Oxide Fuel Cell (SOFC) Operating with CO. International Journal of Hydrogen Energy, 42 (14). pp. 9180-9187. ISSN 0360-3199

Ayodele, Freida Ozavize and Liu, Yao and Hasnah, Haron (2017) A Novel Accounting Knowledge Sharing System: A Conceptual Framework. International Journal of Information and Management Sciences (IJIMS), 28 (3). pp. 277-298. ISSN 1017-1819

Al-Sharifi, H. A. M. and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and Shafie, S. (2017) Numerical Solutions on Flow and Heat Transfer of Non-Newtonian Jeffrey Micropolar Fluid. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

Azmi, W. H. and H. W., Chiam and N. M., Adam and M. K. A. M., Ariffin (2017) Numerical Study Of Nanofluid Heat Transfer For Different Tube Geometries – A Comprehensive Review On Performance. International Communications in Heat and Mass Transfer, 86. pp. 60-70. ISSN 0735-1933

A. H., Hazrin and Z., Maryam and A., Hizrri and Norhidayah, Abdull and Niza, Samsuddin and M. A., Mohd Shukri (2017) Occupancy implications on Indoor Air Quality (IAQ) in selected primary school classrooms around Kuantan, Pahang. Malaysian Journal of Public Health Medicine, Special (1). pp. 94-105. ISSN 1675-0306

Alara, Oluwaseun Ruth and Siti Kholijah, Abdul Mudalip and Olalere, Olusegun Abayomi (2017) Optimization of Mangiferin Extrated from Phaleria Macrocarpa Fruits Using Response Surface Methodology. Journal of Applied Research on Medicinal and Aromatic Plants, 5. pp. 82-87. ISSN 2214-7861

Ahmad, Mani Malam and Abd. Aziz, Mohd Azoddein and Mior Ahmad Khushairi, Mohd Zahari and Mazrul Nezam, Abu Seman and Mohammed Saedi, Jami and Olalere, Olusegun Abayomi and Alara, Oluwaseun Ruth (2017) Optimization of process parameters in mixed sulfide oxidation bacterial culture using response surface methodology as a tool. Journal of King Saud University - Science. pp. 1-8. ISSN 1018-3647 (In Press)

Abdulla Fairuzullah, Ahmad Tajuddin and Noraziah, Ahmad and Abdalla, Ahmed N. (2017) Overview Between Clustering and Load Balancing. Advanced Science Letters, 23 (11). pp. 11109-11113. ISSN 1936-6612

Awad, Omar I. and R., Mamat and Ibrahim, Thamir K. and Obed M., Ali and K., Kadirgama and A. M., Leman (2017) Performance and Combustion Characteristics of an SI Engine Fueled With Fusel Oil-Gasoline at Different Water Content. Applied Thermal Engineering, 123. pp. 1374-1385. ISSN 1359-4311

Awad, Omar I. and R., Mamat and M. M., Noor and Ibrahim, Thamir K. and I. M., Yusri (2017) Performance, Combustion Characteristics and Emission Tests of Single Cylinder Engine Running on Fusel Oil - Diesel Blended (F20) Fuel. International Journal of Vehicle Structures & Systems, 9 (3). pp. 195-198. ISSN 0975-3060 (Print); 0975-3540 (Online)

Almatar, Manaf and AlMandeal, Husam and Makky, Essam A. and Kayar, Begum and Yarar, Emel and Var, Isıl and Koksal, Fatih (2017) The Physiological/Pathophysiological Significance of Vitamin D in Cancer, Cardiovascular Disorders and Beyond. Current Drug Metabolism, 18 (3). pp. 207-224. ISSN 1875-5453

Alara, Oluwaseun Ruth and Nour, A. H. and Siti Kholijah, Abdul Mudalip and Olalere, Olusegun Abayomi (2017) Phytochemical and Pharmacological Properties of Vernonia amygdalina: A Review. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 2. pp. 80-96. ISSN 0126-8139

Azmi, W. H. and M. Z., Sharif and Yusof, T. M. and R., Mamat and A. A. M., Redhwan (2017) Potential of Nanorefrigerant and Nanolubricant on Energy Saving in Refrigeration System – A Review. Renewable and Sustainable Energy Reviews, 69. pp. 415-428. ISSN 1364-0321

Ahmed, Abdulghani Ali and Chua, Xue Li (2017) Proactive Model for Locating and Collecting Cybercrime Evidences on Cloud Computing. International Journal of Biotechnology and Bioengineering, 3 (2). p. 60. ISSN 2475-3432

Ahmad Shah Hizam, Md. Yasir and N. M. Zuki, N. M. (2017) Production Layout Efficiency Improvement for Armoured Vehicle Assembly Line. International Journal of Information Research and Review, 4 (3). pp. 3810-3815. ISSN 2349-9141

Azilah, Ajit and Ahmad Ziad, Sulaiman and Chisti, Yusuf (2017) Production of Bioethanol by Zymomonas Mobilis in High-gravity Extractive Fermentations. Food and Bioproducts Processing, 102. pp. 123-135. ISSN 0960-3085

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Samira A., Kamaruddin and Wan Faizal, Wan Ishak (2017) Quantification Of Dense Nonaqueous Phase Liquid Saturation In Double-Porosity Soil Media Using A Light Transmission Visualization Technique. Journal of Porous Media, 20 (7). pp. 591-606. ISSN 1934-0508

Akash Kumar, Shukla and Sudhakar, K. and Prashant, Baredar (2017) Recent Advancement in BIPV Product Technologies: A Review. Energy and Buildings, 140. pp. 188-195. ISSN 0378-7788

Awad, Omar I. and R., Mamat and Ali, Obed M. and Azmi, W. H. and K., Kadirgama and I. M., Yusri and A. M., Leman and Yusaf, T. (2017) Response Surface Methodology (RSM) Based Multi-Objective Optimization of Fusel Oil-Gasoline Blends at Different Water Content in SI Engine. Energy Conversion and Management, 150. pp. 222-241. ISSN 0196-8904

A. A., Haneen and Noraziah, Ahmad and Ritu, Gupta (2017) Review on Data Partitioning Strategies in Big Data Environment. Advanced Science Letters, 23 (11). pp. 11101-11104. ISSN 1936-6612

Ali, Elghool and Firdaus, Basrawi and Ibrahim, Thamir K. and Khairul, Habib and Hassan, Ibrahim and D. M. N., D. Idris (2017) A Review on Heat Sink for Thermo-electric Power Generation: Classifications and Parameters Affecting Performance. Energy Conversion and Management, 134. pp. 260-277. ISSN 0196-8904

Alghail, Adnan Ali and Liu, Yao and Cheng, Jack Kie (2017) The Roles of Knowledge Management in Project Management towards Organizational Performance. Global Journal For Research Analysis (GJRA), 6 (7). pp. 41-43. ISSN 2277-8160

Ahmad, Mani Malam and Abd. Aziz, Mohd Azoddein and Mior Ahmad Khushairi, Mohd Zahari and Mazrul Nizam, Abu Seman and Mohammed Saedi, Jami (2017) Screening of Effective Markers for Mesophilic Bacterium Growth Using Factorial Experimental Design. International Journal of Bio-Science and Bio-Technology (IJBSBT), 9 (3). pp. 59-74. ISSN 2233-7849

A., Taib and M. Z. A. M., Zahid and M. A. A., Rahim and Faisal, Ade and Saffuan, Wan Ahmad (2017) Selection Of Multiple Earthquakes Considering Vertical Ground Motion To Structures. International Journal of Civil Engineering and Geo-Environmental, Sp. (NCWE). pp. 10-14. ISSN 2180-2742

Adam, Samsudin and Norhayati, Rosli and Amalina Nisa, Ariffin (2017) Stability Analysis of Explicit and Implicit Stochastic Runge-Kutta Methods for Stochastic Differential Equations. Journal of Physics: Conference Series, 890 (012084). pp. 1-7. ISSN 1742-6596

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2017) A Subjective and Objective Fuzzy-Based Analytical Hierarchy Process Model for Prioritization of Lean Product Development Practices. Management Science Letters, 7 (6). pp. 297-310. ISSN 1923-9335 (Print); 1923-9343 (Online)

A. K. M., Kafi and N. S., Azmi and M. M., Yusoff and Crossley, Maxwell J. (2017) Superoxide Radical Biosensor Based on a 3D Enzyme/Carbon Nanotube Conductive Networks. Journal of Nanoscience and Nanotechnology, 17 (8). pp. 5896-5899. ISSN 1533-4880 (Print); 1533-4899 (Online)

Akhtar, Muhammad Nadeem and Ali Salim, Landa Zeenelabdin and Swee, Keong Yeap and Nadiah, Abu and Seema, Zareen and Kong, Mun Lo and Addila, Abu Bakar and Noorjahan Banu, Alitheen (2017) Synthesis and Cytotoxic Effects of (E)-3-(2,3-dimethoxyphenyl)-1-(5-methylfuran-2-yl) prop-2-en-1-one in MDA-MB231 and MCF-7 Breast Cancer Cell Lines. Phytochemistry Letters, 19. pp. 145-150. ISSN 1874-3900

Akhtar, Muhammad Nadeem and Gul, Samreen and Rehman, Aziz-ur and Abbasi, M. Athar and Khan, Khalid Mohammed and Nafeesa, Khadija and Siddiqa, Asia and Shahid, Muhammad and Subhani, Zinayyera (2017) Synthesis, Antimicrobial Evaluation and Hemolytic Activity of 2-[[5-alkyl/aralkyl substituted-1,3,4-oxadiazol-2-yl]thio]-N-[4-(4-morpholinyl)phenyl]acetamide derivatives. Journal of Saudi Chemical Society, 21 (Suppl. 1). pp. 425-433. ISSN 1319-6103

Ayodele, Bamidele V. and Nor Shahirah, Mohd Nasir and Khan, Maksudur R. and Cheng, C. K. (2017) Synthesis, Characterization and Catalytic Performance of Ceria-Supported Cobalt Catalyst for Methane Dry Reforming To Syngas. Malaysian Journal of Analytical Sciences, 21 (1). pp. 248-260. ISSN 1394-2506

Aainaa Izyan, Nafsun and Herz, F. and Specht, E. and Komossa, H. and Wirtz, S. and Scherer, V. and Liu, X. (2017) Thermal Bed Mixing in Rotary Drums for Different Operational Parameters. Chemical Engineering Science, 160. pp. 346-353. ISSN 0009-2509

Ansah, Richard Hannis and Aikhuele, Daniel Osezua and Liu, Yao (2017) Unethical Admissions: Academic Integrity in Question. Science and Engineering Ethics, 23 (4). pp. 1237-1239. ISSN 1353-3452 (Print); 1471-5546 (Online)

Ansah, Richard Hannis and Sorooshian, Shahryar (2017) Unethical University Operations: Deception in Disguise. International Journal of Ethics Education, 2 (1). pp. 97-98. ISSN 2363-9997 (Print); 2364-0006 (Online)

Awad, Omar I. and Ali, Obed Majeed and R., Mamat and Abdul Adam, Abdullah and G., Najafi and M. K., Kamarulzaman and I. M., Yusri and M. M., Noor (2017) Using Fusel Oil as a Blend in Gasoline to Improve SI Engine Efficiencies: A Comprehensive Review. Renewable and Sustainable Energy Reviews, 69. pp. 1232-1242. ISSN 1364-0321

Albtoosh, Ja’far A. Aldibat and Ahmad Tarmizi, Haron (2017) Variation Orders Causes in Construction Buildings Projects in Jordan. Global Journal of Engineering Science and Research Management, 4 (9). pp. 42-48. ISSN 2349-4506

Alfarra, Hossam Adden and Alsibai, Mohammad Hayyan (2017) Wireless Smart Sensor Network for Flood Management Optimization. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-7. ISSN 2289-697X

Abbas Mohammed, Khudhair and N. Mohammed, Muamer and Mazlina, Abdul Majid and Mohd Sharifuddin, Ahmad (2017) A conceptual security sub-model for enhancing human-agent collaboration based on generic nodal approach. Journal of Engineering and Applied Sciences. ISSN 1816-949x (Print); 1818-7803 (Online)

Azis, Yudi and Mohd Ridzuan, Darun and Kartini, Dwi and Bernik, Merita and Harsanto, Budi (2017) A model of managing innovation of SMEs in Indonesian creative industries. International Journal of Business and Society, 18 (S2). pp. 391-408. ISSN 1511-6670

Ahmad Huzaimi, Abd Jamil and Mohamad Syazli, Fathi (2017) An overview of contract documents for building information modelling (BIM) construction projects. Journal of Advanced Research in Business and Management Studies, 7 (2). pp. 68-72. ISSN 2462-1935

Akbari, Abolghasem and Noram Irwan, Ramli and Ngien, S. K. and Reyhane, Azimi (2016) Application of Public Domain Satellite-Based DEMs in Natural Hazard Modeling. International Journal of Environmental Science and Development, 7 (2). pp. 140-144. ISSN 2010-0264

Ayodele, Bamidele V. and Khan, Maksudur R. and Nooruddin, Sk Safdar and Cheng, C. K. (2016) Modelling and Optimization of Syngas Production by Methane Dry Reforming Over Samarium Oxide Supported Cobalt Catalyst: Response Surface Methodology and Artificial Neural Networks Approach. Clean Technologies and Environmental Policy, 19 (93). pp. 1-13. ISSN 1618-954X(Print); 1618-9558(Online)

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and M. R., Islam and Nitthiyah, Jeyaratnam and Yuvaraj, A. R. (2016) Polyurethane Types, Synthesis and Applications - A Review. RSC Advances, 6 (115). pp. 114453-114482. ISSN 2046-2069

Ahmed, Bestoun S. and Sahib, Mouayad A. and Gambardella, Luca M. and Afzal, Wasif and Kamal Z., Zamli (2016) Optimum Design of PIλDμ Controller for an Automatic Voltage Regulator System Using Combinatorial Test Design. PlosOne, 11 (11). pp. 1-20. ISSN 1932-6203

Abid, Hussanan and Mohd Zuki, Salleh and Khan, Ilyas and Sharidan, Shafie (2016) Analytical Solution for Suction and Injection Flow of a Viscoplastic Casson Fluid Past a Stretching Surface in the Presence of viscous dissipation. Neural Computing and Applications, 2016. pp. 1-9. ISSN 0941-0643

Aizi Nor Mazila, Ramli and Tuan Norsyalieza, Tuan Aznan and Rosli, Md. Illias (2016) Bromelain: from Production to Commercialisation. Journal of the Science of Food and Agriculture. pp. 1-10.

Akbari, Abolghasem and Azizan, Abu Samah and Daryabor, Farshid (2016) Raster-Based Derivation of a Flood Runoff Susceptibility Map using the Revised Runoff Curve Number (CN) for the Kuantan Watershed, Malaysia. Environmental Earth Sciences, 75 (137). pp. 1-8. ISSN 1866-6299

Abdullah, Ali D. and Gisen, J. I. A. and Pieter, van der Zaag and Hubert H. G., Savenije and Usama F. A., Karim and Ilyas, Masih and Ioana, Popescu (2016) Predicting the Salt Water Intrusion in the Shatt al-Arab Estuary using an Analytical Approach. Hydrology and Earth System Sciences, 20 (10). pp. 4031-4042. ISSN 1027-5606

Asar, A. K. and Ghalia, Bouhedda (2016) Islāmic Guidelines for Women to Work and Hold Public Office Positions. International Journal of Science and Research (IJSR), 5 (10). pp. 1311-1315. ISSN 2319-7064

A. K. M., Kafi and Nina Suhaity, Azmi and M. M., Yusoff (2016) Integration of Horseradish Peroxidase/Carbon Nanotube to Construct a Novel Platform for Direct Electrochemistry of Enxymes and Biosensing Applications. Abstract of Applied Sciences and Engineering, 11. ISSN 2415-2072

Awanis, Romli and Setchi, Rossitza and Prickett, Paul and De la Pisa, Miguel (2016) Eco-Design Case-Based Reasoning Tool: The Integration of Ecological Quality Function Deployment and Case-Based Reasoning Methods for Supporting Sustainable Product Design. Proc IMechE Part B: Journal Engineering Manufacture. pp. 1-20. ISSN 0954-4054 (Print); 2041-2975 (Online)

Abu, Taher and Lee, Dong-Jin and Lee, Ik-Mo and Lutfor, M. R. and Sarkar, Shaheen M. (2016) A Novel Graphene-Supported Palladium Catalyst for Suzuki–Miyaura Coupling of Less Reactive Heteroaryl Halides in Water. Bulletin of The Korean Chemical Society, 37 (9). pp. 1478-1485. ISSN 1229-5949

Azmi, Mohd Shariff and Hanida, Abdul Aziz and Noor Diana, Abdul Majid (2016) Way Forward in Process Safety Management (PSM) for Effective Implementation in Process Industries. Current Opinion in Chemical Engineering, 14. pp. 56-60. ISSN 2211-3398

Ayodele, Bamidele V. and Khan, Maksudur R. and Cheng, C. K. (2016) Greenhouse Gases Mitigation by CO2 Reforming of Methane to Hydrogen-rich Syngas using Praseodymium Oxide Supported Cobalt Catalyst. Clean Technologies and Environment Policy. pp. 1-13. ISSN 1618-954X (Print); 1618-9558 (Online)

Ayodele, Bamidele V. and Hossain, Sk Safdar and Lam, Su Shiung and Osazuwa, Osarieme U. and Khan, Maksudur R. and Cheng, C. K. (2016) Syngas Production from CO2 Reforming of Methane over Neodymium Sesquioxide Supported Cobalt Catalyst. Journal of Natural Gas Science and Engineering, 34. pp. 873-885. ISSN 1875-5100

Abdullah Make, Muhammad Razif and M. F. F., Ab Rashid and Razali, Muhamad Magffierah (2016) A Review of Two-sided Assembly Line Balancing Problem. International Journal of Advanced Manufacturing Technology. pp. 1-21. ISSN 0268-3768 (Print), 1433-3015 (Online) (In Press)

Ali, Md. Asraf and Sundaraj, Kenneth and R. Badlishah, Ahmad and Ahamed, Nizam Uddin and Islam, Md. Anamul and Sundaraj, Sebastian (2016) sEMG Activities of the Three Heads of the Triceps Brachii Muscle During Cricket Bowling. Journal of Mechanics in Medicine and Biology, 16 (2). pp. 1-13. ISSN 0219-5194

Asrul, Adam and Zuwairie, Ibrahim and Norrima, Mokhtar and Mohd Ibrahim, Shapiai and Cumming, Paul and Marizan, Mubin (2016) Evaluation of Different Time Domain Peak Models using Extreme Learning Machine‐Based Peak Detection for EEG Signal. SpringerPlus, 5 (1036). pp. 1-14. ISSN 2193-1801

Ayodele, Bamidele V. and Cheng, C. K. (2016) Biorefinery for the Production of Biodiesel, Hydrogen and Synthesis Gas Integrated with CHP from Oil Palm in Malaysia. Chemical Product and Process Modeling. ISSN 2194-6159 (print); 1934-2659 (online)

Ahamed, Nizam Uddin and Alqahtani, Mahdi and Rahman, Matiur (2016) Age-related EMG responses of the biceps brachii muscle of young adults. Biomedical Research (India), 27 (3). pp. 787-793. ISSN 0970-938X

Ali, Muna Jalal and Makky, Essam A. and M. M., Yusoff (2016) Oral Health Care Improvement using Combined Toothpaste with Traditional Medicinal Plants. Advances in Environmental Biology , 10 (7). pp. 315-321. ISSN 1995-0756

Ali, Gomaa A. M. and Shoriya Aruni, Abdul Manaf and Divyashree, A and K. F., Chong and Hegde, Gurumurthy (2016) Superior Supercapacitive Performance in Porous Nanocarbons. Journal of Energy Chemistry, 25 (4). pp. 734-739. ISSN 2095-4956

Ahmad Nor Kasruddin, Nasir and Raja Mohd Taufika, Raja Ismail and Tokhi, M. O. (2016) Adaptive Spiral Dynamics Metaheuristic Algorithm for Global Optimisation with Application to Modelling of a Flexible System. Applied Mathematical Modelling, 40 (9-10). pp. 5442-5461. ISSN 0307-904X

Ayodele, Bamidele V. and Hossain, M. Anwar and Chong, Soo Ling and Soh, Jiah Chee and Abdullah, Sureena and Khan, Maksudur R. and Cheng, C. K. (2016) Non-Isothermal Kinetics and Mechanistic Study of Thermal Decomposition of Light Rare Earth Metal Nitrate Hydrates using Thermogravimetric Analysis. Journal of Thermal Analysis and Calorimetry. pp. 1-13. ISSN 1388-6150 (print); 1588-2926 (online)

Ayodele, Bamidele V. and Khan, Maksudur R. and Lam, Su Shiung and Cheng, C. K. (2016) Production of CO-rich Hydrogen from Methane Dry Reforming Over Lanthania-Supported Cobalt Catalyst: Kinetic and Mechanistic Studies. International Journal of Hydrogen Energy, 41 (8). pp. 4603-4615. ISSN 0360-3199

Abdulbari, Hayder A. and R. M., Yunus and Charles, A. (2016) A Turbulence-Altering Pseudo-Surface for Enhancing the Flow in Pipes. Chemical Engineering Communications, 203 (2). pp. 278-286. ISSN 0098-6445

Alrubaye, Ali Jamal and Muzamir, Hasan and Fattah, Mohammed Y. (2016) Engineering Properties of Clayey Soil Stabilized with Lime. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2434-2441. ISSN 1819-6608

Anisah Sajidah, Haji Saud and Indran, Vidhyaa Paroo and Nazira, Mahmud and Mohd Hasbi, Ab. Rahim (2016) Low Metal Loading Palladium Mixed-Oxides Catalyst for the Synthesis of Glycerol Carbonate. Asian Journal of Applied Sciences, 4 (1). pp. 181-189. ISSN 2321–0893

Alazaiza, M. Y. D. and Ngien, S. K. and Wan Faizal, Wan Ishak and Samira, A. Kamaruddin (2016) A Review of Light Reflection and Transmission Methods in Monitoring Non-Aqueous Phase Liquid Migration in Porous Media. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2319-2326. ISSN 1819-6608

Azmir, Azhari and S., Sulaiman and A. K., Prasada Rao (2016) A Review on the Application of Peening Processes for Surface Treatment. IOP Conference Series: Materials Science and Engineering, 114 (012002). pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online)

A. S., Samsudin and M. I. N., Isa (2016) Conductivity Study On Plasticized Solid Bioelectrolytes CMC-NH¬4BR and Application In Solid-State Proton Batteries. Jurnal Teknologi (Sciences and Engineering), 78 (6-5). pp. 43-48. ISSN 0127-9696 (print); 2180-3722 (online)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and A. N., Oumer (2016) Air Distributor Designs for Fluidized Bed Combustors: A Review. Engineering, Technology & Applied Science Research, 6 (3). pp. 1029-1034. ISSN 1792-8036

Akbari, Sweeta and Nour, A. H. and Fayaz, Fahim and Halimi, Mohammad Sediq and Nazari, Ahmadshah (2016) Analysis of Microwave Heating Process for Demulsification of Water-in-Crude Oil Emulsions. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 1-10. ISSN 1991-8178

Ahmad, Mani Malam and Abdul Aziz, Mohd Azoddein and Mior Ahmad Khushairi, Mohd Zahari and Mazrul Nizam, Abu Seman (2016) Application Of Factorial Design To The Stress Phenomenon Of Bacillus Cereus (Atcc 14579) Growth. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 148-156. ISSN 1991-8178

Akhwanzada, Salman A. and Razman, Mat Tahar and Firdaus, Muhammad-Sukki and Abu Bakar, Munir and Ruzairi, Abdul Rahim (2016) Application of System Dynamics Approach in Electricity Sector Modelling: A Review. Renewable and Sustainable Energy Reviews, 56. pp. 29-37. ISSN 1364-0321

Ahmad, Mani Malam and Abdul Aziz, Mohd Azoddein and Mior Ahmad Khushairi, Mohd Zahari and Mazrul Nizam, Abu Seman and Mohammad Saedi, Jami and Faten Ahada, Mohd Azli (2016) Assessment of Sulfide Concentration Effects in a Micro-Oxygenated Condition on the Growth and Removal by Pseudomonas putida (ATCC 49128). Journal of Advanced Research in Materials Science, 27 (1). pp. 1-10. ISSN 2289-7992

Aireen Mak, Siew Fern and Hasnah, Haron and Ishak, Ismail and Yuvaraj, Ganesan and Fathyah, Hashim (2016) Assessment on Internal Audit Capability Level in a Public Sector Organisation Case Study on a Local Government. Jurnal Pengauditan Sektor Awam, 1. pp. 1-21. ISSN 2180-2955

Azhari, H. Nour and Mohammed, Sulieman and M. M., Yusoff and Nour, A. H. and Mazza, M. Adam (2016) Bioassay-guided Isolation and Identification of Antifungal Compounds from Seeds of Swietenia Macrophylla King. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 55-62. ISSN 1991-8178

Abdul Aziz, Mohd Azoddein and Mani Malam, Ahmad and R. M., Yunus and Nik Meriam, Nik Sulaiman (2016) A Bioremediation Approach to Mercury Removal in a Shake Flask Culture Using Pseudomonas putida (ATCC 49128). Journal of Analytical & Bioanalytical Techniques, 7 (3). pp. 1-6. ISSN 2155-9872

Azniah, Ismail and Maizatul Hayati, Mohamad Yatim and Noor Azida, Sahabudin and Nor Zuhaidah, Mohamed Zain (2016) Capability of Primary School Pupils in Learning and Exploring Visual Programing Language = Keupayaan murid sekolah rendah mempelajari dan menerokai bahasa pengaturcaraan visual. Journal of ICT in Education (JICTIE), 3 (1). pp. 89-97. ISSN 2289-7844

Ayodele, Bamidele V. and Khan, Maksudur R. and Cheng, C. K. (2016) Catalytic Performance of Ceria-supported Cobalt Catalyst for CO-rich Hydrogen Production from Dry Reforming of Methane. International Journal of Hydrogen Energy, 41 (1). pp. 198-207. ISSN 0360-3199 (In Press)

Abdul Aziz, Mohd Azoddein and F. A. M., Azli and A. B., Bustary and M. H., Sulaiman and A. Z. M., Salehen and Mazrul Nizam, Abu Seman and Said, N. and M., Sulaiman (2016) Characterization of Enzyme Produced from Pseudomonas Putida for BTX (Benzene, Toluene & Xylene) Treatment in Petrochemical Industry Wastewater System. International Journal of Research in Engineering and Science (IJRES), 4 (9). pp. 6-20. ISSN 2320-9364

Almatar, Manaf and Makky, Essam A. (2016) Cladosporium Cladosporioides from the Perspectives of Medical and Biotechnological Approaches. 3 Biotech, 6 (4). pp. 1-8. ISSN 2190-572X (print); 2190-5738 (online)

Ajiboye, Adeleke Raheem and Ruzaini, Abdullah Arshah and Hongwu, Qin and Jamila, Abdul Hadi (2016) Comparing the Performance of Predictive Models Constructed Using the Techniques of Feed-Forword and Generalized Regression Neural Networks. International Journal of Software Engineering & Computer Sciences (IJSECS), 2. pp. 66-73. ISSN 2289-8522

Ali, Eman N. and K. N. S., Muhamad (2016) Comparison of Moringa Oleifera Seeds Oil Characterization Produced Chemically and Mechanically. IOP Conference Series: Earth and Environmental Science, 36. pp. 1-7. ISSN 1755-1315

Asmara, Y. P. and Sutjipto, A. G. E. and H. N. M., Zuki and Siregar, Januar Parlaungan and Bachtiar, Dandi and T., Kurniawan and M. C., Ismail (2016) Corrosion Inhibition of Carbon Steel in Oil and Gas Environments. International Journal of Advanced and Applied Sciences, 3 (5). pp. 88-91. ISSN 0973-4562 (Print); 0973-9769 (Online)

Ahmed, Hussam Alddin Shihab and Mohamad Fadli, Zolkipli (2016) Data Security Issues In Cloud Computing: Review. International Journal of Software Engineering & Computer Sciences (IJSECS), 2. pp. 58-65. ISSN 2289-8522

Akbari, Sweeta and Nour, A. H. and Saidatul Shima, Jamari and Rajabi, Abdul Qayom (2016) Demulsification of Water-in-Crude Oil Emulsion via Conventional Heating and Microwave Heating Technology in their Optimum Conditions. Australian Journal of Basic and Applied Sciences, 10 (4). pp. 66-74. ISSN 1991-8178

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod and Al Tarabsheh, A. and Altawil, Ibrahim A. (2016) Design and Economic Evaluation of Electrification of Small Villages in Rural Area in Yemen Using Stand-Alone PV System. International Journal of Renewable Energy Research, 6 (1). pp. 1442-1451. ISSN 1309-0127

Arif, Hanafi and Sulaiman, Harun and Enggari, Sofika and Rani, Larissa Navia (2016) Detecting Duplicate Entry in Email Field using Alliance Rules-based Algorithm. Journal of Computer Science and Information Technology, 1 (1). pp. 71-81.

A. A. M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat (2016) Development of Nanorefrigerants for Various Types of Refrigerant based: A Comprehensive Review on Performance. International Communications in Heat and Mass Transfer, 76. pp. 285-293. ISSN 0735-1933

Awadalla, Mohamed Osman and Nour, A. H. (2016) Diagnostics of Electron Temperature in Laser Produced Plasma from Iron Using Plasma X-ray Emission. Australian Journal of Basic and Applied Sciences, 10 (17). pp. 107-113. ISSN 1991-8178

Aufa, Zin and Kamarul Hawari, Ghazali and Norliana, Khamisan (2016) Early Detection of Spots High Water Saturation for Landslide Prediction Using Thermal Imaging Analysis. International Journal of Environmental Science and Development, 7 (1). pp. 41-45. ISSN 2010-0264

Awad, Omar I. and R., Mamat and Obed M., Ali and I. M., Yusri (2016) Effect of Fuel Oil - Gasoline Fusel Blends on the Performance and Emission Characteristics of Spark Ignition Engine: A Review. Journal of Scienctific Research & Development , 3 (5). pp. 31-36. ISSN 1115-7569

Abdul Shukor Lim, Nor Hasanah and Samadi, Mostafa and Shafegat, Arezou and Nur Farhayu, Ariffin and Keyvanfar, Ali and Mohd. Sam, Abdul Rahman (2016) Effect of Homogenous Ceramic Waste on Drying Shrinkage of Mortar. Journal of Environmental Treatment Techniques , 4 (4). pp. 149-152. ISSN 2309-1185

Azmir, Azhari and Schindler, Christian and Godard, Claudia and Gibmeier, Jens and Kerscher, Eberhard (2016) Effect of Multiple Passes Treatment in Waterjet Peening on Fatigue Performance. Applied Surface Science. pp. 1-7. ISSN 0169-4332

Al-Sharifi, H. A. M. and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh (2016) Effect of Newtonian Heating on the Mixed Convection Boundary Layer Flow of Eyring-Powell Fluid Across a Nonlinearly Stretching Sheet. Journal of Engineering and Applied Sciences, 11 (11). pp. 2372-2377. ISSN 1816-949x (Print); 1818-7803 (Online)

Al-Sharafi, Mohammed A. and Ruzaini, Abdullah Arshah and Abu-Shanab, Emad and Elayah, Nabil (2016) The Effect of Security and Privacy Perceptions on Customers’ Trust to Accept Internet Banking Services: An Extension of TAM. Journal of Engineering and Applied Sciences, 11 (3). pp. 545-552. ISSN 1816-949x (Print); 1818-7803 (Online)

A. A., Mohammed and Bachtiar, Dandi and Siregar, J. P. and M. R. M., Rejab (2016) Effect of Sodium Hydroxide on The Tensile Properties of Sugar Palm Fibre Reinforced Thermoplastic Polyurethane Composites. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1765-1777. ISSN 2289-4659 (print); 2231-8380 (online)

Azmi, W. H. and Khamisah, Abdul Hamid and R., Mamat and K. V., Sharma and Mohd Sham, Mohamad (2016) Effects of Working Temperature on Thermo-Physical Properties and Forced Convection Heat Transfer of TiO2 Nanofluids in Water–Ethylene Glycol Mixture. Applied Thermal Engineering, 106. pp. 1190-1199. ISSN 1359-4311

Agarwal, Shilpi and Sadegh, Hamidreza and Monajjemi, Majid and Hamdy, Abdel Salam and Ali, Gomaa A. M. and Memar, Amir O. H. and Shahryari-ghoshekandi, Ramin and Tyagi, Inderjeet and Gupta, Vinod Kumar (2016) Efficient Removal of Toxic Bromothymol Blue and Methylene Blue from Wastewater by Polyvinyl Alcohol. Journal of Molecular Liquids, 218. pp. 191-197. ISSN 0167-7322

Ali, Gomaa A. M. and Fouad, Osama A. and Makhlouf, Salah A. (2016) Electrical Properties of Cobalt Oxide/Silica Nanocomposites Obtained by Sol-Gel Technique. American Journal of Engineering and Applied Sciences, 9 (1). pp. 12-16. ISSN 1941-7020 (Print); 1941-7039 (Online)

Azmi, W. H. and R., Mamat and K. V., Sharma and G., Najafi and M. S., Mohamad (2016) The Enhancement of Effective Thermal Conductivity and Effective Dynamic Viscosity of Nanofluids – A Review. Renewable and Sustainable Energy Reviews, 53. pp. 1046-1058. ISSN 1364-0321

Al Adresi, Alaeldeen Saleh and Mohd Ridzuan, Darun (2016) Enhancing Employee’s Trust and Commitment through Strategic Human Resource Management: A Literature Review. International Journal of Academic Research in Business and Social Sciences (IJARBSS), 6 (5). pp. 413-426. ISSN 2222-6990

Asrul, Adam and Zuwairie, Ibrahim and Mohd Ibrahim, Shapiai and Marizan, Mubin (2016) Evaluation Of Different Peak Models Of Eye Blink Eeg For Signal Peak Detection Using Artificial Neural Network. Neural Network World, 1. pp. 67-89. ISSN 1210-0552

Alam, A. K. M. Moshiul and Beg, M. D. H. and R. M., Yunus and Mina, Md. Forhad and Maria, K. H. and Mieno, T. (2016) Evolution of Functionalized Multi-walled Carbon Nanotubes by Dendritic Polymer Coating and their Anti-scavenging Behavior During Curing Process. Materials Letters, 167 (March). pp. 58-60. ISSN 0167-577X

Aishah, Safi and Shahrani, Anuar and D. M. N., D. Idris and F., Basrawi and Ahmmad Shukrie, Md Yudin and Mohd, Nazani (2016) Feasibility of Pumped Hydro Storage for Energy Production and Flood Mitigation in Pekan. International Journal of Advanced and Applied Sciences, 3 (5). pp. 39-43. ISSN 0973-4562(print); 0973-9769(online)

Asrul, Adam and Zuwairie, Ibrahim and Norrima, Mokhtar and Mohd Ibrahim, Shapiai and Marizan, Mubin and Ismail, Saad (2016) Feature Selection using Angle Modulated Simulated Kalman Filter for Peak Classification of EEG Signals. SpringerPlus. pp. 1-24. ISSN 2193-1801

Ahmad, Asraf and Sorooshian, Shahryar and Cheng, Jack Kie (2016) Formulation of Logit Regression. Journal of Advanced Research Design, 21 (1). pp. 6-9. ISSN 2289-7984

Anthony, Bokolo Jnr. and Mazlina, Abdul Majid (2016) Green IS for Sustainable Decision Making in Software Management. Journal of Soft Computing and Decision Support Systems, 3 (3). pp. 20-34. ISSN 2289-8603

Azmi, W. H. and Khamisah, Abdul Hamid and N. A., Usri and R., Mamat and K. V., Sharma (2016) Heat Transfer Augmentation of Ethylene Glycol: Water Nanofluids and Applications – A review. International Communications in Heat and Mass Transfer, 75. pp. 13-23. ISSN 0735-1933

Azmi, W. H. and Khamisah, Abdul Hamid and Usri, N. A. and R., Mamat and Mohd Sham, Mohamad (2016) Heat Transfer and Friction Factor of Water and Ethylene Glycol Mixture Based TiO2 and Al2O3 Nanofluids Under Turbulent Flow. International Communications in Heat and Mass Transfer, 76. pp. 24-32. ISSN 0735-1933

Abid, Hussanan and Mohd Zuki, Salleh and Khan, Ilyas and Razman, Mat Tahar (2016) Heat and Mass Transfer in a Micropolar Fluid with Newtonian Heating: An Exact Analysis. Neural Computing and Applications. pp. 1-9. ISSN 0941-0643

Ahmad, Redza and Toshiki, Kondo and Toshiaki, Yasui and Masahiro, Fukumoto (2016) High Anatase Rate Titanium Dioxide Coating Deposition by Low Power Microwave Plasma Spray. IOP Conference Series: Materials Science and Engineering, 114 (012031). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) A Hybrid Fuzzy Model for Lean Product Development Performance Measurement. IOP Conference Series: Materials Science and Engineering, 114 (1). 012048. ISSN 1757-8981 (Print), 1757-899X (Online)

A. R., Yusoff (2016) Identifying Bifurcation Behavior during Machining Process for an Irregular Milling Tool Geometry. Measurement, 93. pp. 57-66. ISSN 0263-2241

Ali, Muna Jalal and Makky, Essam A. and M. M., Yusoff (2016) Impact of Antimicrobial Agents on Bacterial Isolates from Dental Decay. ARPN Journal of Engineering and Applied Sciences, 11 (16). 9689-9693 . ISSN 1819-6608

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) An Improved Methodology for Multi-Criteria Evaluations in the Shipping Industry. Brodogradnja/Shipbuilding, 67 (3). pp. 59-72. ISSN 0007-215X (Print); 1845-5859 (Online)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and A. N., Oumer (2016) Improvement On Particulate Mixing Through Inclined Slotted Swirling Distributor In A Fluidized Bed: An Experimental Study. Advanced Powder Technology, 27 (5). pp. 2102-2111. ISSN 0921-8831

Asmara, Y. P. and J. P., Siregar and Cionita, Tezara and Chang, Tai Ann (2016) Improving Efficiency of Aluminium Sacrificial Anode Using Cold Work Process. IOP Conference Series: Materials Science and Engineering, 114 (1). pp. 1-6. ISSN 1757-8981 (Print); 1757-899X (Online)

Alrubaye, Ali Jamal and Muzamir, Hasan and Al-Fattah, Mohammad (2016) Improving Geotechnical Characteristics of Kaolin Soil Using Silica Fume and Lime. Special Topics & Reviews in Porous Media: An International Journal, 7 (1). pp. 77-85. ISSN 2151-4798 (print); 2151-562X (online)

Ahmad Nazif, Noor Kamar and Suziyana, Mat Dahan and Nurirafarina Hanim, Abu Bakar and Ali, A. J. Adham and Sorooshian, Shahryar (2016) Improving Productivity by Simulate Facility Layout: A Case Study in a Car Component Manufacturer. International Journal of Industrial Management (IJIM), 2. pp. 72-80. ISSN 2289-9286 (Print); 0127-564x (Online)

A., Idris and Chua, Gek Kee and Mohamad Rizza, Othman (2016) Incorporating Potential Environmental Impact from Water for Injection in Environmental Assessment of Monoclonal Antibody Production. Chemical Engineering Research and Design. ISSN 0263-8762 (In Press)

A., Shah and S., Izman and Mas Ayu, Hassan (2016) Influence Of Nitrogen Flow Rate In Reducing Tin Microdroplets On Biomedical TI-13ZR-13NB Alloy. Jurnal Teknologi (Sciences and Engineering), 78 (5-10). pp. 6-10. ISSN 0127-9696 (print); 2180-3722 (online)

Al-Sharifi, H. A. M. and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and Norhafizah, Md Sarif and N. F., Mohammad and S., Shafie and A., Ali (2016) Influence Of Slip Velocity On Convective Boundary Layer Flow Of Jeffrey Fluid Under Convective Boundary Conditions. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10950-10953. ISSN 1819-6608

Ahmad Huzaimi , Abd Jamil and Mohamad Syazli , Fathi (2016) The Integration of Lean Construction and Sustainable Construction: A Stakeholder Perspective in Analyzing Sustainable Lean Construction Strategies in Malaysia. Procedia Computer Science, 100. pp. 634-643. ISSN 1877-0509

Abdul Syukor, Abd Razak and Suryati, Sulaiman and Siddique, Md. Nurul Islam and Zularisam, A. W. and M. I. M., Said (2016) Integration of Phytogreen for Heavy Metal Removal from Wastewater. Journal of Cleaner Production, 112 (Prt. 4). pp. 3124-3131. ISSN 0959-6526 (print); 1879-1786 (online)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) Intuitionistic Fuzzy-based Model for Failure Detection. SpringerPlus, 5 (1938). pp. 1-15. ISSN 2193-1801

A., Malik Hamat and M. F., Ghazali and Makeen, Mohd Amin and Fatihah, Adnan (2016) Irregularity Detection In Numerical Signal Using Time-Frequency Analysis. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3593-3597. ISSN 1819-6608

Ansah, Richard Hannis and Sorooshian, Shahryar and Shariman, Mustafa (2016) Lean Construction: An Effective Approach for Project Management. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1607-1612. ISSN 1819-6608

Asmara, Y. P. and Siregar, Januar Parlaungan and C., Tezara and Wan, Nurlisa and J., Jamiluddin (2016) Long Term Corrosion Experiment of Steel Rebar in Fly Ash-Based Geopolymer Concrete in NaCl Solution. International Journal of Corrosion.

Aghelie, Amir and Sorooshian, Shahryar and Noor Azlinna, Azizan (2016) Mathematical Modeling of Interrelationship Analysis to Determine Multi-Criteria Decision Making Casual Relations. Journal of Advanced Research Design, 20 (1). pp. 18-33. ISSN 2289-7984

Alam, A. K. M. Moshiul and Beg, M. D. H. and R. M., Yunus (2016) Micro structure and Fractography of Multiwalled Carbon Nanotube Reinforced Unsaturated Polyester Nanocomposites. Polymer Composites. pp. 1-10. ISSN 1548-0569 (In Press)

Ali, Muna Jalal and Makky, Essam A. and M. M., Yusoff (2016) Microbiological Study against Bacterial Isolates from Different Patients. Australian Journal of Basic and Applied Sciences, 10 (14). pp. 366-373. ISSN 1991-8178

Al-Shetwi, Ali Q. and Muhamad Zahim, Sujod (2016) Modeling And Simulation Of Photovoltaic Module With Enhanced Perturb And Observe MPPT Algorithm Using Matlab/Simulink. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12033-12038. ISSN 1819-6608

Al-Shetwi, Ali Q. and Alomoush, Muwaffaq I. (2016) A New Approach To The Solution Of Economic Dispatch Using Genetic Algorithm. Journal of Engineering and Technology, 7 (1). pp. 40-48. ISSN 2180-3811 (print); 2289-814X (online)

A. N., Oumer and N. T., Rao and F., Basrawi and Hassan, Ibrahim (2016) Numerical Simulation on Flow and Heat Transfer Characteristics of Supercritical Fluids in Mini-Channels. Journal of Advances in Technology and Engineering Research. pp. 1-5. ISSN 2414-4592

Alajmi, Qasim and Sadiq, Ali Safa (2016) Opportunities and Challenges in Management Information Systems. International Journal of Applied Sciences and Management, 1 (2). pp. 171-182. ISSN 2413-3396

Ali, Gomaa A. M. and Fouad, Osama A. and S. A., Makhlouf and M. M., Yusoff and K. F., Chong (2016) Optical and Electrochemical Properties of Co3O4/SiO2 Nanocomposite. Advanced Materials Research, 1133. pp. 447-451. ISSN 1022-6680 (print), 1662-8985 (online)

A., Shah and Sudin, Izman and Mas Ayu, Hassan and Ramlee, Mustapha (2016) Optimization of Chemical Pretreatment for Removing Cobalt on Tungsten Carbide Substrate Using Response Surface Methodology. Jurnal Teknologi (Sciences and Engineering), 78 (5-10). pp. 24-32. ISSN 0127-9696 (print); 2180-3722 (online)

Ali Emhammed, Ali A. and Abdalla, Ahmed N. and Ruhaizad, Ishak and Jaber, Aqeel S. (2016) Overloaded Transmission Lines Protection Based On Intelligent Control Protection Scheme. Journal of Engineering and Applied Sciences, 11 (2). pp. 192-198. ISSN 1816-949X

Azizan, Ramli and Mazlin, Mokhtar and Tuan Sidek, T. M. (2016) Pembangunan Industri Halal: Konsep Halalan-Toyyiban dan Pengurusan Keselamatan Industri dalam Kerangka Maqasid al-Shariah = Halal Industry Development: The Concept of Halalan-Toyyiban and Industrial Safety Management within the Framework of Maqasid al-Shariah. Ulum Islamiyyah Journal, 18. pp. 91-114. ISSN ISSN 1675 - 5936

Anuar, Puteh and Rashidi, Abbas and Abd. Ghafar, Don and Zilal, Saari and Muhammad Syafiee, Elias (2016) Pengurusan Agihan Zakat Asnaf Mu’allaf di Majlis Agama Islam Negeri Johor. Jurnal Islamiyyat, 38 (1). pp. 25-34. ISSN 0216-5636

Ahamed, J. U. and Raiyan, M. F. and Hossain, MD. S. and M. M., Rahman and Salam, B. (2016) Production Of Biogas From Anaerobic Digestion Of Poultry Droppings And Domestic Waste Using Catalytic Effect Of Silica Gel. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 2180-1606. ISSN 1985-9325(Print); 2180-1606 (Online)

Ayodele, Bamidele V. and Khan, Maksudur R. and Cheng, C. K. (2016) Production of CO-rich Hydrogen Gas from Methane Dry Reforming over Co/CeO2 Catalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 210-219. ISSN 1978-2993

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) Proposal for a Conceptual Model for Evaluating Lean Product Development Performance: A Study of LPD Enablers in Manufacturing Companies. IOP Conference Series: Materials Science and Engineering, 114 (1). 012047. ISSN 1757-8981 (Print), 1757-899X (Online)

Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and Imran, Anwar and Sharidan, Shafie (2016) Radiation Effect on MHD Stagnation-Point Flow of a Nanofluid over a Nonlinear Stretching Sheet with Convective Boundary Condition. Heat Transfer Research, 47 (9). pp. 797-816. ISSN 1064-2285(Print); 2162-6561(Online)

Amir, Aghelie and Sorooshian, Shahryar and Noor Azlinna, Azizan (2016) Research Gap in Sustainopreneurship. Indian Journal of Science and Technology, 9 (12). pp. 1-6. ISSN 0974-6846 (Print); 0974-5645 (Online)

Aini, Ahmad and Hasan, Ahmad (2016) A Review of Learning Organization Concept from Islamic Perspectives. International Journal of Humanities Technology and Civilization (IJHTC), 1. pp. 45-55. ISSN 2289-7216

A., Jamar and Z. A. A., Majid and Azmi, W. H. and M., Norhafana and A. A., Razak (2016) A Review of Water Heating System for Solar Energy Applications. International Communications in Heat and Mass Transfer, 76. pp. 178-187. ISSN 0735-1933

A. A., Razak and Z. A. A., Majid and Azmi, W. H. and M. H., Ruslan and Choobchian, Sh. and G., Najafi and K., Sopian (2016) Review on Matrix Thermal Absorber Designs for Solar Air Collector. Renewable and Sustainable Energy Reviews, 64. pp. 682-693. ISSN 1364-0321

Akbari, Sweeta and Nour, A. H. and Saidatul Shima, Jamari and Fayaz, Fahim (2016) Rheology and Stability Mechanism of Water-in-crude Oil Emulsions Stabilized by Span 83. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2230-2235. ISSN 1819-6608

Atnaw, Samson M. and Singh, Lakhveer and Hagos, F. Y. and Yousuf, Abu (2016) Road Construction Equipment Management: A Case Study on Selected Industry. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 91-97. ISSN 2289-697X

Abbas, Ali A. and Sharifah Maszura, Syed Mohsin and Cotsovos, Demetrios M. (2016) A Simplified Finite Element Model for Assessing Steel Fibre Reinforced Concrete Structural Performance. Computers & Structures, 173. pp. 31-49. ISSN 0045-7949

Abbas Saliimi, Lokman and Ngahzaifa, Ab. Ghani and Lok, Leh Leong (2016) Simulating Dynamic Time Dilation in Relativistic Virtual Environment. International Journal of Computer Theory and Engineering, 8 (5). pp. 385-388. ISSN 1793-8201

A. N., Oumer and Abdulwehab A., Ibrahim and Nuruzzaman, D. M. and Khairi, Yusuf (2016) Simulation on Effect of Flow Induced Fiber Orientation on the Mechanical Properties of Fiber Reinforced Composites. ARPN Journal of Engineering and Applied Sciences, 11 (18). 10931 -10934. ISSN 1819-6608

Alsibai, Mohammad Hayyan and Abdul Manap, Sulastri (2016) A Study on Driver Fatigue Notification Systems. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10987-10992. ISSN 1819-6608

A. R., Yuvaraj and M. M., Yusoff and Lutfor, M. R. (2016) Synthesis of Bent-shaped Azobenzene Liquid Crystals Derived from Resorcinol for Optical Storage Properties. Molecular Crystals and Liquid Crystals, 631 (1). pp. 21-30. ISSN 1542-1406 (print); 1563-5287 (online)

Almatar, Manaf and Batool, Tahira and Makky, Essam A. (2016) Therapeutic Potential of N-Acetylcysteine for Wound Healing, Acute Bronchiolitis, and Congenital Heart Defects. Current Drug Metabolism, 17 (2). pp. 156-167. ISSN 1875-5453

Ahmed, Abdulghani Ali and Sadiq, Ali Safa and Mohamad Fadli, Zolkipli (2016) Traceback Model for Identifying Sources of Distributed Attacks in Real Time. Security and Communication Networks, 9 (13). pp. 2173-2185. ISSN 1939-0122

Abid, Hussanan and Mohd Zuki, Salleh and Khan, Ilyas and Razman, Mat Tahar (2016) Unsteady Heat Transfer Flow of a Casson Fluid with Newtonian Heating and Thermal Radiation. Jurnal Teknologi (Sciences and Engineering), 78 (4-4). pp. 1-7. ISSN 0127-9696 (print); 2180-3722 (online)

Abid, Hussanan and Khan, Ilyas and Hasmawani, Hashim and Muhammad Khairul Anuar, Mohamed and Nazila, Ishak and Norhafizah, Md Sarif and Mohd Zuki, Salleh (2016) Unsteady MHD Flow of Some Nanofluids Past an Accelerated Vertical Plate Embedded in a Porous Medium. Jurnal Teknologi (Sciences and Engineering), 78 (2). pp. 121-126. ISSN 0127-9696 (print); 2180-3722 (online)

Abdulbari, Hayder A. and Hassan D., Mahammed and Zulkefli, Yaacob and Wafaa, Kamil Mahmood (2016) Wall-Pressure Fluctuations of Modified Turbulent Boundary Layer with Riblets. International Journal of Mechanical & Mechatronics Engineering, 16 (1). pp. 23-34. ISSN 2077-124X (Online); 2227-2771 (Print)

Azmi, Mohd Shariff and Hanida, Abdul Aziz and Noor Diana, Abdul Majid (2016) Way forward in Process Safety Management (PSM) for Effective Implementation in Process Industries. Current Opinion in Chemical Engineering, 14. pp. 56-60. ISSN 2211-3398

Anuar, Puteh and Rashidi, Abbas and Abd Ghafar, Don and Zilal, Saari and Muhammad Syafiee, Elias (2016) The Zakat Distribution Management of Majlis Agama Islam Negeri Johor for the Mu’allaf Asnaf. The International Journal of Islamic Studies, 38 (1). pp. 25-34. ISSN 0126-5636

Amanlou, Yasaman and Hashjin, Teymour Tavakoli and Ghobadian, B. and G., Najafi and R., Mamat (2016) A comprehensive review of Uniform Solar Illumination at Low Concentration Photovoltaic (LCPV) Systems. Renewable and Sustainable Energy Reviews, 60. pp. 1430-1441. ISSN 1364-0321

Alam, Md. Moktadir and Irawan, Addie and Yee, Yin Tan (2015) Buoyancy Effect Control in Multi Legged Robot Locomotion on Seabed using Integrated Impedance-Fuzzy Logic Approach. Indian Journal of Geo-Marine Sciences (IJMS), 44 (12). pp. 1937-1945. ISSN 0975-1033

Ahmad Nor Kasruddin, Nasir and Tokhi, M. O. (2015) Novel Metaheuristic Hybrid Spiral-Dynamic Bacteria-Chemotaxis Algorithms for Global Optimisation. Applied Soft Computing, 27. pp. 357-375. ISSN 1568-4946 (print); 1872-9681 (online)

Ahmad Nor Kasruddin, Nasir and Raja Mohd Taufika, Raja Ismail and Mohd Ashraf, Ahmad (2015) Exponential-Based Spiral Dynamic Algorithm for Modelling of a Flexible Manipulator System. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17450-17456. ISSN 1819-6608

Azhar, Fakharuddin and Palma, Alessandro L. and Giacomo, Francesco Di and Casaluci, Simone and Matteocci, Fabio and Wali, Qamar and Rauf, Muhammad and Carlo, Aldo Di and Brown, Thomas M. and Rajan, Jose (2015) Solid State Perovskite Solar Modules by Vacuum-vapor Assisted Sequential Deposition on Nd:YVO4 Laser Patterned Rutile TiO2 Nanorods. Nanotechnology, 26. 494002 . ISSN 09574484

Ahamed, Nizam Uddin and Zulkifli, Md. Yusof and Alqahtani, Mahdi and Altwijri, Omar and Rahman, S. A. M. Matiur and Sundaraj, Kenneth (2015) Gender Effects in Surface Electromyographic Activity of the Biceps Brachii Muscle during Prolonged Isometric Contraction. Procedia Computer Science, 61. pp. 448-453. ISSN 1877-0509

Ajiboye, Adeleke Raheem and Ruzaini, Abdullah Arshah and Qin, Hongwu (2015) Using an Enhanced Feed-Forward BP Network for Predictive Model Building From Students’ Data. Intelligent Automation and Soft Computing, 2015. pp. 1-7. ISSN 1079-8587

Alsariera, Yazan A. and Mazlina, Abdul Majid and Kamal Z., Zamli (2015) A Bat-inspired Strategy for Pairwise Testing. Journal of Engineering and Applied Sciences, 10 (18). pp. 8500-8506. ISSN 1819-6608

Ahmad, Awais and Akbari, Abolghasem and Iqbal, Javed (2015) GIS-Based Identification Of Overloaded Distribution Transformers & Calculation Of Technical Electric Power Losses. International Journal of Civil Engineering and Geo-Environmental, 6 (1). pp. 14-21. ISSN 2180-2742

Awanis, Romli and Prickett, Paul and Setchi, Rossitza and Soe, Shwe (2015) Integrated Eco-design Decision-making for Sustainable Product Development. International Journal of Production Research, 53 (2). pp. 1-24. ISSN 0020-7543 (Print), 1366-588X (Online)

Ahmad Nor Kasruddin, Nasir and Nor Maniha, Abd Ghani and Tokhi, M. O. (2015) Novel Adaptive Bacterial Foraging Algorithms for Global Optimisation with Application to Modelling of a TRS. Expert Systems with Applications, 42 (3). pp. 1513-1530. ISSN 0957-4174

Ali, Mushtaq and Jasni, Mohamad Zain and Mohamad Fadli, Zolkipli and Badshah, Gran (2015) Mobile cloud computing & mobile's battery efficiency approaches: A review. Journal of Theoretical and Applied Information Technology , 79 (1). pp. 153-175. ISSN 1992-8645

Alginahi, Yasser M. and Mudassar, Mohammed and M. Nomani, Kabir (2015) An Arabic Script Recognition System. KSII Transactions on Internet and Information Systems, 9 (9). pp. 3701-3720. ISSN 1976-7277

A. R., Razali and M., Ishak and Nazrul Idzham, Kasim and Mohd Azam, Musa (2015) Effect of Magnetic Flux on Rotor-Stator Arrangement of Neodymium Permanent Magnet. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7749-7752. ISSN 1819-6608

Abdulbari, Hayder A. and Basheer, Esmail Abdullah Mohammed and Ainoon, Shabirin and Wafaa, Kamil Mahmood (2015) Investigating the Degradation Resistance Improvement of Polymer Surfactant Complex Drag Reducing Agent. Applied Mechanics and Materials, 789-90. pp. 7-14. ISSN 1662-7482

Asnul Hadi, Ahmad and Naher, Sumsun and Brabazon, Dermot (2015) Mechanical Properties of Thixoformed 7075 Feedstock Produced Via The Direct Thermal Method. Key Engineering Materials, 651-53. pp. 1569-1574. ISSN 1662-9795

Abdulbari, Hayder A. and Fiona Ling, Wang Ming (2015) Drag Reduction Properties of Nanofluids in Microchannels. The Journal of Engineering Research (TJER), 12 (2). pp. 60-67. ISSN 1726-6009 (print); 1726-6742(online)

Ali, Md. Asraf and Sundaraj, Kenneth and R. Badlishah, Ahmad and Ahamed, Nizam Uddin and Islam, Md. Anamul and Sundaraj, Sebastian (2015) Muscle Fatigue in the Three Heads of the Triceps Brachii During a Controlled Forceful Hand Grip Task with Full Elbow Extension Using Surface Electromyography. Journal of Human Kinetics, 46. pp. 69-76. ISSN 1899-7562

Abdulbari, Hayder A. and Hawege, Emsalem (2015) Polymer-Surfactant Complex for Enhancing the Mechanical and Drag Reduction Performances of a Turbulent Flow. Australian Journal of Basic and Applied Sciences, 9 (8). pp. 1-6. ISSN 1991-8178

A. K., Prasada Rao (2015) Nucleation in Al Alloys Processed By MCDC Casting. Journal of Materials Engineering and Performance, 24 (6). pp. 2219-2224. ISSN 1544-1024

Abdulrazak, Lway Faisal and Oudah, Ali A. (2015) Interference Mitigation Technique Through Shielding and Antenna Discrimination. International Journal of Multimedia and Ubiquitous Engineering (IJMUE), 10 (3). pp. 343-352. ISSN 1975-0080

Ali, Gomaa A. M. and Wahba, Osama A.G and Hassan, Ali M. and Fouad, Osama A. and K. F., Chong (2015) Calcium-based Nanosized Mixed Metal Oxides for Supercapacitor Application. Ceramics International, 41 (6). pp. 8230-8234. ISSN 0272-8842

Ahamed, Nizam Uddin and Ahmed, Nasim and Alqahtani, Mahdi and Altwijri, Omar and Ahmad, Badlishah and Sundaraj, Kenneth (2015) Investigation of the EMG-Time Relationship of the Biceps Brachii Muscle During Contractions. Journal of Physical Therapy Science, 27 (1). pp. 39-40. ISSN 0915-5287

Abdulbari, Hayder A. and Oluwasoga, Akindoyo Edward (2015) Drag Reduction Efficacy of CTABr and Nanosilica Particles Using Rotating Disk Apparatus (RDA). Australian Journal of Basic and Applied Sciences, 9 (8). pp. 136-144. ISSN 1991-8178

Abdulbari, Hayder A. and Faraj, Emsalem and Jolius, Gimbun and Mahmood, Wafaa K. (2015) Energy Dissipation Reduction Using Similarly-Charged Polymer-Surfactant Complex. Advances and Applications in Fluid Mechanics, 18 (1). pp. 113-128. ISSN 0973-4686

Abdul Adam, Abdullah and Mohd Herzwan, Hamzah and Agung, Sudrajad and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2015) Analysis of Combustion Characteristics of Waste Plastic Disposal Fuel (WPDF) and Tire Derived Fuel (TDF). Applied Mechanics and Materials, 773 (774). pp. 600-604. ISSN 1662-7482

Ansah, Richard Hannis and Sorooshian, Shahryar and Shariman, Mustafa (2015) Analytic Hierarchy Process Decision Making Algorithm. Global Journal of Pure and Applied Mathematics, 11 (4). pp. 2393-2400. ISSN 0973-1768 (print); 0973-9750 (online)

Atnaw, Samson M. and Kulkarni, R. R. (2015) Application of Computer Aided Process Planning in Manufacturing Industries. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 52-65. ISSN 2289-697X

Akbari, Abolghasem and Sedaei, Leila and Mehdi, Naderi and Azizan, Abu Samah and Sedaei, Nazila (2015) The Application of the Water Erosion Prediction Project (WEPP) Model for the Estimation of Runoff and Sediment on a Monthly Time Resolution. Environmental Earth Sciences, 74 (7). pp. 5827-5837. ISSN 1866-6299

Abolghasem, Akbari and Leila, Sedaei and Mehdi, Naderi and Azizan, Abu Samah and Nazila, Sedaei (2015) The Application of the Water Erosion Prediction Project (WEPP) Model for the Estimation of Runoff and Sediment on a Monthly Time Resolution. Environmental Earth Sciences, 74 (7). pp. 5827-5837. ISSN 1866-6299

Ahamed, Nizam Uddin and Zulkifli, Md. Yusof and Al-Mamun, Md. Abdullah and Rahman, S. A. M. Matiur and Ahmed, Nasim and Hassnawi, L. A. (2015) Automatic Car Parking and Controlling System Using Programmable Logic Controller (PLC). International Journal of Applied Engineering Research (IJAER), 10 (1). pp. 69-75. ISSN 0973-4562 (print); 1087-1090 (online)

Ali, Muna Jalal and Makky, Essam A. and M. M., Yusoff (2015) Bacteriological Study on Dental Caries and Test their Sensitivity to Virulence Factors and Heavy Metals. Advances in Environmental Biology, 9 (27). 301-306 . ISSN 1995-0756 (Print); 1998-1066 (Online)

Abdulbari, Hayder A. and Hassan D., Mahammed and Zulkefli B. Y., Hassan (2015) Bio-Inspired Passive Drag Reduction Techniques: A Review. ChemBioEng Reviews, 2 (3). pp. 185-203. ISSN 2196-9744

Abdul Syakir, Abdul Mubin and Norhafizan, Ahmad and Azuddin, Mamat and Zahari, Taha and Iskandar, Hasanuddin (2015) CFD Study of Drag and Lift of Sepak Takraw Ball at Different Face Orientations. Advances in Mechanical Engineering, 7 (1). pp. 1-10. ISSN 1687-8132 (Print); 1687-8140 (Online)

Abdul Syukor, Abd Razak and Norbaizurah, Rahman and Nur Azzimah, Zamri and Suryati, Sulaiman and Noor Asyikin Aisyah, Burhanudin and Hasmanie, Abdul Halim and Edriyana, Abd Aziz (2015) COD, BOD and Heavy Metal Removal from Ground Water Treatment by using WASRA System: A Case Study on Universiti Malaysia Pahang Mosque. Advances in Environmental Biology, 9 (1). pp. 26-29. ISSN 1995-0756(Print); 1998-1066(Online)

Akbari, Abolghasem and Sedaei, Nazila and Sedaei, Leila and Cox, Jonathan Peter (2015) Customization of the OSSEM Model for Application to Annual Data from the Talar Aquifer, Northern Iran. Water Science & Technology: Water Supply, 15 (3). pp. 656-666. ISSN 1606-9749

Akhtar, Muhammad Nadeem and Seema, Zareen and Nurshafika, Sakeh and Gul, Sana and Syed Adnan, Ali Shah and Syahida, Ahmad (2015) Design and Synthesis of Chalcone Derivatives as Potent Tyrosinase Inhibitors and Their Structural Activity Relationship. Journal of Molecular Structure, 1085. pp. 97-1. ISSN 0022-2860

Aini Norhidayah, Mohamed and Jaya Vejayan, Palliah and M. M., Yusoff (2015) Detection and Quantification of Eurycomanone Levels in Tongkat Ali Herbal Products. Journal of Applied Sciences, 15 (7). pp. 999-1005. ISSN 1812-5654 (print); 1812-5662 (online)

Abdulbari, Hayder A. and Oluwasoga, Akindoyo Edward and Zainab, Yousif (2015) A Dual Mechanism of the Drag Reduction by Rigid Polymers and Cationic Surfactant: Complex and Nanofluids of Xanthan Gum and Hexadecyl Trimethyl Ammonium Chloride. International Journal of Research in Engineering and Technology (IJRET), 4 (2). pp. 84-93. ISSN 2321-7308 (print); 2319-1163 (online)

Ayesha, Noor and Yuserrie, Zainuddin (2015) Effect of Job Dissatisfaction on Employee Turnover in the Palm Oil Industry of Malaysia. International Journal of Industrial Management (IJIM), 1. pp. 1-7. ISSN 2289-9286 (Print); 0127-564x (Online)

A. K., Prasada Rao and S. L., Pramod and B. S., Murty and Srinivasa R., Bakshi (2015) Effect of Sc Addition on the Microstructure and Wear Properties of A356 Alloy and A356–TiB2in Situ Composite. Materials and Design, 78. pp. 85-94. ISSN 0261-3069

Asmadi, Ali and R. M., Yunus and Mohamad, Awang and Anwar, Johari and Ramli, Mat (2015) Effect of Shear Rate on Characteristics, Performance and Morphology of Polysulfone Blend Membranes. Applied Mechanics and Materials, 699. pp. 305-310. ISSN 1662-7482

Abdul Hamid, K. and Azmi, W. H. and R., Mamat and Usri, N. A. and G., Najafi (2015) Effect of Temperature on Heat Transfer Coefficient of Titanium Dioxide in Ethylene Glycol-based Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1367-1375. ISSN 2289-4659 (print); 2231-8380 (online)

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and M. R., Islam (2015) The Effects of Poly Dimethyl Siloxane on Water Absorption and Natural Degradation of Poly(lactic acid)/Oil Palm Empty Fruit Bunch Fiber Biocomposites. Journal of Applied Polymer Science, 132 (45). p. 42784. ISSN 1097-4628

Ahmad Affendi, Hashim and Mazlina, Abdul Majid (2015) Effects of Video Display Terminal Resolutions to the Legibility of Text on a Web Page. International Journal of Software Engineering & Computer Sciences (IJSECS), 1. pp. 131-154. ISSN 2289-8522

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and M. R., Islam (2015) The Effects of Wettability, Shear Strength, and Weibull Characteristics of Fiber-reinforced Poly(lactic acid) Composites. Journal of Polymer Engineering. ISSN 0334-6447 (Print); 2191-0340 (Online)

Ali, Gomaa A. M. and M. M., Yusoff and K. F., Chong (2015) Electrochemical Properties of Electrodeposited MnO2 Nanoparticles. Advanced Materials Research, 1113. pp. 550-553. ISSN 1022-6680 (print), 1662-8985 (online)

Alsibai, Mohammad Hayyan and Hadi, Manap and Abdul Adam, Abdullah (2015) Enhanced Face Recognition Method Performance on Android vs Windows Platform. ARPN Journal of Engineering and Applied Sciences, 10 (23). 17479 -17485 . ISSN 1819-6608

Ali, Eman N. and Alfarra, Sabreen R. and M. M., Yusoff and Lutfor, M. R. (2015) Environmentally Friendly Biosorbent from Moringa Oleifera Leaves for Water Treatment. International Journal of Environmental Science and Development, 6 (3). pp. 165-169. ISSN 2010-0264

Amir, Azizi (2015) Evaluation Improvement of Production Productivity Performance using Statistical Process Control, Overall Equipment Efficiency, and Autonomous Maintenance. Procedia Manufacturing, 2. pp. 186-190. ISSN 2351-9789

Asmara, Y. P. and Siregar, J. P. and L. H., Shah and Cionita, Tezara (2015) Experimental Investigations On Corrosion Model Of Welded 6061 Aluminum Exposed In NaCl Solution. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2600-2607. ISSN 1985-9325(Print); 2180-1606 (Online)

Ahmed, Abdulghani Ali (2015) Filtration Model For DDoS Attack Detection in Real-Time. International Journal of Software Engineering & Computer Sciences (IJSECS), 1. pp. 95-108. ISSN 2289-8522

Ahmed, Abdulghani Ali and Aman, Jantan and Wan, Tat-Chee (2015) Filtration Model for the Detection of Malicious Traffic in Large-Scale Networks. Computer Communications. ISSN 0140-3664 (In Press)

Amir, Azizi and Aikhuele, Daniel O. and Souleman, Fathi S. (2015) A Fuzzy TOPSIS Model to Rank Automotive Suppliers. Procedia Manufacturing, 2. pp. 159-164. ISSN 2351-9789

Alam, Jahangir and Rahman, Md. Wasikur and Mazid, Russel A. and Khan, Maksudur R. (2015) Gamma-Irradiated Gelatin-Based Films Modified by HEMA for Medical Application. International Journal of Polymer Analysis and Characterization, 20 (5). pp. 426-434. ISSN 1023-666X

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2015) Heat Transfer of Alumina Sands in Fluidized Bed Combustor with Novel Circular Edge Segments Air Distributor. Energy Procedia, 75. pp. 1752-1757. ISSN 1876-6102

Appalasuwami, Sasikala and Jahir Hussain, Fathima Shahitha and K., Kadirgama and Lakshmi, Prema and M. M., Yusoff (2015) Hydroxyethyl Cellulose Stabilized Copper Nanoparticles and its Antibacterial Activity. Journal of Applied Sciences Research, 11 (24). pp. 67-73. ISSN 819-544X (print); 816-157X (online)

Ahmad Nor Kasruddin, Nasir and Tokhi, M. O. (2015) An Improved Spiral Dynamic Optimization Algorithm with Engineering Application. IEEE Transactions On Systems, Man, And Cybernetics: Systems, 45 (6). pp. 943-954. ISSN 2168-2216

A. R., Razali and M., Ishak and Mohd Azam, Musa and Nazrul Idzham, Kasim and Wan Ahmad Najmuddin, Wan Saidin (2015) Improvement of Overall Equipment Effectiveness (OEE) through Implementation of Autonomous Maintenance in Crankcase Line. Applied Mechanics and Materials, 761. pp. 165-169. ISSN 1662-7482

A. R., Razali and Nazrul Idzham, Kasim and Mohd Azam, Musa and Noraishah, Mohamad Noor and Wan Ahmad Najmuddin, Wan Saidin (2015) Improvement of Overall Equipment Effectiveness (OEE) through Implementation of Total Productive Maintenance (TPM) in Manufacturing Industries. Applied Mechanics and Materials, 761. pp. 180-185. ISSN 1662-7482

A. K. M., Moshiul Alam and Beg, M. D. H. and R. M., Yunus (2015) Influence of Carbon Nano Tubes on the Thermo-Mechanical Properties of Unsaturated Polyester Nanocomposite. IOP Conference Series: Materials Science and Engineering, 78. pp. 1-6. ISSN 1757-8981 (Print), 1757-899X (Online)

Asmadi, Ali and R. M., Yunus and Mohamad, Awang and Mohd Azizi, Che Yunus (2015) Influence of Hydrophilic Polymer on Proteins Separation, Molecular Weight Cut-off (MWCO) and Average Pore Size of Polysulfone Blend Membrane. Jurnal Teknologi (Sciences and Engineering), 74 (7). pp. 53-56. ISSN 0127-9696 (print); 2180-3722 (online)

Akbari, Sweeta and Nour, A. H. and Fayaz, Fahim (2015) The Influence of Process Parameters on Stability Of Water-In-Crude Oil Emulsion Stabilized by Span 80. International Journal of Engineering Sciences & Research Technology, 4 (5). pp. 526-534. ISSN 2277-9655

Ahmed, Abdulghani Ali (2015) Investigation Model for Ddos Attack Detection in Real-Time. International Journal of Software Engineering & Computer Sciences (IJSECS), 1. pp. 93-105. ISSN 2289-8522

Abdul Hamid, K. and Azmi, W. H. and R., Mamat and Usri, N. A. and G., Najafi (2015) Investigation of Al2O3 Nanofluid Viscosity for Different Water/EG Mixture Based. Energy Procedia, 79. pp. 354-359. ISSN 1876-6102

Azrag, M. A. K. and Tuty Asmawaty, Abdul Kadir and Jaber, Aqeel S. and Odili, Julius Beneoluchi (2015) Large-scale Kinetic Parameter Identification of Metabolic Network Model of E. coli using PSO. Advances in Bioscience and Biotechnology, 6 (2). pp. 120-130. ISSN 2156-8456 (print); 2156-8502 (online)

Ayodele, Bamidele V. and Cheng, C. K. (2015) Modelling and Optimization of Syngas Production from Methane Dry Reforming Over Ceria-Supported Cobalt Catalyst Using Artificial Neural Networks and Box–Behnken Design. Journal of Industrial and Engineering Chemistry, 32. pp. 246-258. ISSN 1226-086X

Azrina, Abd Aziz and Shaliza, Ibrahim and Pichiah, Saravanan (2015) Nanocrystal TiO2 Engulfed SiO2-Barium Hexaferrite for Enhanced Electrons Mobility and Solar Harvesting Potential. Materials Science Forum, 819. pp. 226-231. ISSN 1662-9752

A. N., Oumer and M. S., Idris and N. M. M., Ammar and Kurniawan, Tedi (2015) Numerical and Experimental Investigation on Tensile Properties of Natural-Sand Reinforced Polypropylene. Advanced Materials Research, 1115. pp. 283-287. ISSN 1022-6680 (print), 1662-8985 (online)

A. R., Mohd Farhan and K. Y., Pin and M. S., Zamree and Luqman Chuah, Abdullah and Nazira, Mahmud (2015) Optimisation of Solid Liquid Extraction of Orthosiphon stamineus Leaves using Response Surface Methodology Technique. Pertanika Journal of Tropical Agricultural Science, 38 (2). pp. 259-270. ISSN 1511-3701 (Print); 2231-8542 (Online)

Ali, Muna Jalal and Makky, Essam A. and M. M., Yusoff (2015) Oral Bacteria: Antimicrobial and Virulence. Journal of Chemical and Pharmaceutical Research, 7 (3). pp. 1816-1821. ISSN 0975-7384

A. R., Zulhishamuddin and S. N., Aqida (2015) An Overview of High Thermal Conductive Hot Press Forming Die Material Development. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1686-1694. ISSN 2289-4659 (print); 2231-8380 (online)

Alagorni, Abubaker Hamza and Zulkefli, Yaacob and Nour, A. H. (2015) An Overview of Oil Production Stages: Enhanced Oil Recovery Techniques and Nitrogen Injection. International Journal of Environmental Science and Development, 6 (9). pp. 693-701. ISSN 2010-0264

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, Mustafa M. and Wan Faizal, Wan Ishak and Kamaruddin, Samira A. (2015) An Overview of Photographic Methods in Monitoring Non-Aqueous Phase Liquid Migration in Porous Medium. Special Topics & Reviews in Porous Media, 6 (4). pp. 367-381. ISSN 2151-4798 (print); 2151-562X (online)

Abdul Adam, Abdullah and Amir, Khalid and N., Jaat and A., Sapit and A., Razali and Bukhari, Manshoor and Izzuddin, Zaman (2015) Performance and Emissions Characteristics of Crude Jatropha Oil Biodiesel Blends in a Diesel Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2447-2457. ISSN 1985-9325(Print); 2180-1606 (Online)

Ali, Eman N. and M. Z., Jamaludin (2015) Possibility of Producing Ethanol from Moringa Oleifera Pod Husk. Journal of Advanced Research Design, 5 (1). pp. 1-9. ISSN 2289-7984

Ali, Gomaa A. M. and M. M., Yusoff and Yun, Hau Ng and Hong, Ngee Lim and K. F., Chong (2015) Potentiostatic and Galvanostatic Electrodeposition of Manganese Oxide for Supercapacitor Application: A Comparison Study. Current Applied Physics, 15 (10). pp. 1143-1147. ISSN 1567-1739

Abd Hamid, Zahidy and Noor Azlinna, Azizan and Sorooshian, Shahryar (2015) Predictors for the Success and Survival of Entrepreneurs in the Construction Industry. International Journal of Engineering Business Management, 7 (1). pp. 1-11. ISSN 1847-9790

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and M. R., Islam and Al Mamun, Abdullah (2015) Preparation and Characterization of Poly(lactic acid)-Based Composites Reinforced with Poly Dimethyl Siloxane/Ultrasound-Treated Oil Palm Empty Fruit Bunch. Polymer-Plastics Technology and Engineering, 54 (13). pp. 1321-1333. ISSN 0360-2559 (Print); 1525-6111 (Online)

Ayodele, Bamidele V. and Cheng, C. K. (2015) Process Modelling, Thermodynamic Analysis and Optimization of Dry Reforming, Partial Oxidation and Auto-Thermal Methane Reforming for Hydrogen and Syngas Production. Chemical Product and Process Modeling, 10 (4). pp. 211-220. ISSN 2194-6159 (print); 1934-2659 (online)

Alinejad, T. and Kwong, Q. Bin and Jaya Vejayan, Palliah and Othman, R. Y. and Bhassu, S. (2015) Proteomic Analysis of Differentially Expressed Protein in Hemocytes of Wild Giant Freshwater Prawn Macrobrachium Rosenbergii Infected with Infectious Hypodermal and Hematopoietic Necrosis Virus (IHHNV). Meta Gene, 5 (Sept.). pp. 55-67. ISSN 2214-5400

Alam, Jahangir and Das, Bipul Chandra and Rahman, Md. Wasikur and Biswas, Biplob Kumar and Khan, Maksudur R. (2015) Removal of Dark Blue-GL from Wastewater using Water Hyacinth: A Study of Equilibrium Adsorption Isotherm. Desalination and Water Treatment, 56 (6). pp. 1520-1525. ISSN 1944-3994

Abdul Syukor, Abd Razak and Nur Azzimah, Zamri and Norbaizurah, Rahman and Suryati, Sulaiman and Nurhidayah, Mahazam and Hasmanie, Abdul Halim and Edriyana, Abd Aziz (2015) Removal of Physical Properties in Water Supply by WASRA for Sustainable Irrigation System. Advances in Environmental Biology, 9 (1). pp. 30-34. ISSN 1995-0756(Print); 1998-1066(Online)

Asan Vernyuy, Wirba and Abdullahi, Abubakar Mas'ud and Firdaus, Muhammad-Sukki and Salman, Ahmad and Razman, Mat Tahar and Ruzairi, Abdul Rahim and Abu Bakar, Munir and Md Ershadul, Karim (2015) Renewable Energy Potentials In Cameroon: Prospects and Challenges. Renewable Energy, 76. pp. 560-565. ISSN 0960-1481

Asar, A. K. and Ghalia, Bouhedda (2015) Research in Women's Public Office Positions in Islam. International Journal of Science and Research (IJSR), 4 (10). pp. 2219-2222. ISSN 2319-7064

Aini Norhidayah, Mohamed and Jaya Vejayan, Palliah and M. M., Yusoff (2015) Review on Eurycoma longifolia Pharmacological and Phytochemical Properties. Journal of Applied Sciences, 15 (6). pp. 831-844. ISSN 1812-5654

Amin, Teyfouri and Milad, Ahmadi and Erfan, Shamsaddini lori and Sorooshian, Shahryar (2015) A Review on Micro Formings. Modern Applied Science, 9 (9). pp. 230-239. ISSN 1913-1844 (printed), 1913-1852 (online)

Amir, Aziz and R., Mamat and Wan Khairuddin, Wan Ali and Mohd Rozi, Mohd Perang (2015) Review on Typical Ingredients for Ammonium Perchlorate Based Solid Propellant. Applied Mechanics and Materials, 773/74. pp. 470-475. ISSN 1662-7482

Ahmad Faizal, Mohd Zain and Jia, Wei Low and Nafarizal, Nayan and Mohd Zainizan, Sahdan and Mohd Khairul, Ahmad and Ali Yeon, Md Shakaff and Ammar, Zakaria (2015) Spectroscopic Studies of Magnetron Sputtering Plasma Discharge in Cu/O2/Ar Mixture for Copper Oxide Thin Film Fabrication. Jurnal Teknologi (Sciences and Engineering), 73 (1). pp. 11-15. ISSN 0127-9696 (print); 2180-3722 (online)

Adamu I., Abu Bakar and Akram, M. Zeki and Haruna, Chiroma and Sanah, Abdullahi Muaz and Eka, Novita Sari and Tutut, Herawan (2015) Spread Spectrum Audio Watermarking Using Vector Space Projections. Advances in Intelligent Systems and Computing, 320. pp. 297-307.

Ali, Gomaa A. M. and Makhlouf, Salah A. and Chong, Kwok Feng and M. M., Yusoff (2015) Structural and Electrochemical Characteristics of Graphene Nanosheets as Supercapacitor Electrodes. Reviews on Advanced Materials Science, 41 (1). pp. 35-43. ISSN 1605-8127

Al-Dabbagh, Jinan B. and Rozman, Mohd Tahar and M., Ishak and Siti Aisyah, Harun (2015) Structural and Phase Formation of TiAl Alloys Synthesized by Mechanical Alloying and Heat Treatment. International Journal Nanoelectronics and Materials, 8. pp. 23-32. ISSN 1985-5761 (print); 2232-1535 (online)

Ahmed, Yassin Mustafa and Khidhir, Basim A. and Khairul Saleh, Mohamed Sahari and M., Ishak (2015) Study of Mechanical Properties on Thick Titanium Alloy (Ti - 6Al- 4V) Multi-Passes Weld. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2 (4). pp. 660-665. ISSN 3159-0040

Abdul Aziz, Mohd Azoddein and Ahmad Bazli, Bustary and F. A. M., Azli and N. H. Z., Abidin and I. M., Ali and M. S. M., Desa (2015) Study of Palm Oil Mill Effluents Treatment Using Bio Engineered Structure Biomedia. Journal of Engineering and Technology, 6 (2). pp. 67-74. ISSN 2180-3811

Alsibai, Mohammad Hayyan and Abdul Manap, Sulastri (2015) A Study on Smart Wheelchair Systems. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 25-35. ISSN 2289-697X

Abdulbari, Hayder A. and Faraj, Emsalem (2015) Studying the Interaction between a New Mixture in Enhancing Drag Reduction Efficiency. International Journal of Chemical Engineering and Applications (IJCEA), 6 (4). pp. 277-280. ISSN 2010-0221

Ali, Muna Jalal and Makky, Essam A. and Batool, Tahira and M. M., Yusoff (2015) Susceptibility of Oral Bacteria to Antimicrobial Agents and Virulence Factors. Journal of Chemical and Pharmaceutical Research, 7 (3). pp. 1822-1829. ISSN 0975-7384

Ayodele, Bamidele V. and Khan, Maksudur R. and Cheng, C. K. (2015) Syngas Production from CO2 Reforming of Methane Over Ceria Supported Cobalt Catalyst: Effects of Reactants Partial Pressure. Journal of Natural Gas Science and Engineering. pp. 1-8. ISSN 1875-5100 (In Press)

Akhtar, Muhammad Nadeem and Rasool, Shahid and Rehman, Aziz-ur and Abbasi, Muhammad Athar (2015) Synthesis of N'-Substituted-2-((5-(4-Chlorophenyl)-1,3,4-Oxadiazol-2-ylthio Acetohydrazie Derivatives as Suitable Antibacterial Agents. Tropical Journal of Pharmaceutical Research, 14 (6). pp. 1081-1088. ISSN 1596-5996 (print); 1596-9827 (online)

Akhtar, Muhammad Nadeem and Rehman, Aziz-ur and Gul, Samreen and Abbasi, Muhammad Athar and Nafeesa, Khadija and Ahmad, Irshad and Afzal, Saira (2015) Synthesis, Structural Analysis and Screening of Some Novel 5-Substituted Aryl/Aralkyl-1,3,4-Oxadiazol-2-Yl 4-(Morpholin-4-Ylsulfonyl)Benzyl Sulfides as Potential Antibacterial Agents. Phosphorus, Sulfur, and Silicon and the Related Elements. ISSN 1042-6507 (print); 1563-5325 (online)

Adams, Rebecca and Nik Aloesnita, Nik Mohd Alwi and Newton, Jonathan (2015) Task Complexity Effects on the Complexity and Accuracy of Writing Via Text Chat. Journal of Second Language Writing, 29 (Sept.). pp. 64-81. ISSN 1060-3743

Ali, Mushtaq and Jasni, Mohamad Zain and Mohamad Fadli, Zolkipli and Gran, Badshah (2015) Taxonomy of Computational Offloading in Mobile Devices. World Applied Sciences Journal, 33 (12). pp. 1798-1805. ISSN 1818-4952

Azwin Arif, Abdul Rahim and Aliff, Nawi and Mohd Isa, Hamzah (2015) Teachers Acceptance Of Mobile Learning For Teaching And Learning In Islamic Education: A Preliminary Study. Turkish Online Journal of Distance Education, 16 (1). pp. 184-192. ISSN 1302-6488

Aufa, Zin and Kamarul Hawari, Ghazali and Norliana, Khamisan (2015) Thermal Detection of Water Saturation Spots For Landslide Prediction. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17114-17119. ISSN 1819-6608

Abdul Aziz, Mohd Azoddein and Hazlan, Haris and Faten Ahada, Mohd Azli (2015) Treatment of palm oil mill effluent (POME) using membrane bioreactor. Malaysian Journal of Analytical Sciences, 19 (3). pp. 463-471. ISSN 1394-2506

Abdullah, Nasser and Alsewari, Abdulrahman A. and Kamal Z., Zamli (2015) Tuning of Cuckoo Search Based Strategy for T-Way Testing. Journal of Engineering and Applied Sciences, 10 (19). 8948 -89453. ISSN 1819-6608

Abdulbari, Hayder A. and R. M., Yunus and Charles, A. (2015) A Turbulence-altering Pseudo-surface (TAPS) for Enhancing the Flow in Pipes. Chemical Engineering Communications, 203 (2). pp. 278-286. ISSN 1563-5201

Afifuddin Husairi, Hussain and Mohd Khairi, Abu Husain and Adi Irfan, Che Ani and Noor Irza, Mohd Zaki and Zarina, Mohd Ali (2015) Unlocking the Potential Value of BIM Implementation in Malaysia: A Pilot Study. European Journal of Advances in Engineering and Technology, 2 (12). pp. 11-20. ISSN 2394 - 658X

Azhar, Fakharuddin and Rajan, Jose and Francesco, Di Giacomo and Alessandro, L. Palma and Fabio, Matteocci and Irfan, Ahmed and Stefano, Razza and Alessandra, D'Epifanio and Silvia, Licoccia and Jamil, Ismail and Aldo, Di Carlo and Thomas, M. Brown (2015) Vertical TiO2 Nanorods as a Medium for Durable and High Efficiency Perovskite Solar Modules. ACS Nano, 9 (8). pp. 8420-8429. ISSN 1936-0851

Athirah, Razak and Normy N., Razak and Nurhamim, Ahamad and Fatanah, Suhaimi and Ummu Kulthum, Jamaludin (2015) Virtual Trial And Monte Carlo Analysis Of Model-Based Glycaemic Control Protocol With Reduced Nursing Effort. Jurnal Teknologi (Sciences and Engineering), 77 (7). pp. 55-59. ISSN 0127-9696 (print); 2180-3722 (online)

Andalib, Tarnima Warda and Mohd Ridzuan, Darun and Noor Azlinna, Azizan (2015) Western Trends of Human Resources Management: Theories and Practices. International Journal of Industrial Management (IJIM), 1. pp. 1-9. ISSN 2289-9286 (Print); 0127-564x (Online)

Ahmad Rasdan, Ismail and S. N. A., Abdullah and Abdul Adam, Abdullah and B. M., Deros (2015) Whole-Body Vibration Exposure Of Malaysian Taxi Drivers. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2786-2792. ISSN 1985-9325(Print); 2180-1606 (Online)

Abduaziz, Oumer and Jack, Kie Cheng and Razman, Mat Tahar and Ramaraju, Ramgopal Varma (2015) A hybrid Simulation model for Green Logistics Assessment in Automotive Industry. Procedia Engineering, 100. pp. 960-969. ISSN 1877-7058

Ali, Gomaa A. M. and Shoriya Aruni, Abdul Manaf and Kumar, Anuj and K. F., Chong and Hegde, Gurumurthy (2014) High Performance Supercapacitor Using Catalysis Free Porous Carbon Nanoparticles. Journal of Physics D: Applied Physics, 47 (49). pp. 1-6. ISSN 0022-3727 (print); 1361-6463 (online)

Awang Shri, Dayangku Noorfazidah and Tsuchiya, Koichi and Yamamoto, Akiko (2014) Surface Characterization of TiNi Deformed by High-pressure Torsion. Applied Surface Science, 289. pp. 338-344. ISSN 0169-4332

Awang Shri, D.N. and Tsuchiya, Koichi and Yamamoto, Akiko (2014) Effect of high-pressure torsion deformation on surface properties and biocompatibility of Ti-50.9 mol. %Ni alloys. Biointerphases, 9 (2). 029007-1. ISSN 1934-8630

Al-Mamun, Md. Abdullah and Ahmed, Nasim and Ahamed, Nizam Uddin and Rahman, S. A. M. Matiur and Ahmad, Badlishah and Sundaraj, K. (2014) Use of Wireless Sensor and Microcontroller to Develop Water-level Monitoring System. Indian Journal of Science and Technology, 7 (9). pp. 1325-1330. ISSN 0974-6846 (Print); 0974-5645 (Online)

Azri, Alias and Kuwagi, Kenya and Kogane, Atsuto and Hirano, Hiroyuki and Takami, Toshihiro (2014) Non-dimensionalization and Three-dimensional Flow Regime Map for Fluidization Analyses. Chemical Engineering Science, 119. pp. 199-211. ISSN 0009-2509

Azmi, W. H. and Sharma, K. V. and Sarma , P. K. and R., Mamat and Shahrani, Anuar and Sundar, L. Syam (2014) Numerical Validation of Experimental Heat Transfer Coefficient with SiO2 Nanofluid Flowing in a Tube with Twisted Tape Inserts. Applied Thermal Engineering, 73. pp. 294-304. ISSN 1359-4311

Ahamed, Nizam Uddin and Sundaraj, K and Alqahtani, Mahdi and Altwijri, Omar and Ali, A and Islam, A (2014) EMG-force relationship during static contraction: Effects on sensor placement locations on biceps brachii muscle. Technology and Health Care, 22 (4). pp. 505-513. ISSN 0928-7329

Azmir, Azhari and Schindler, Christian and Hilbert, K. and Godardb, C. and Kerscher, Eberhard (2014) Influence of Waterjet Peening and Smoothing on the Material Surface and Properties of Stainless Steel 304. Surface and Coatings Technology, 258 (Nov.). pp. 1176-1182. ISSN 0257-8972

A. K., Prasada Rao (2014) Understanding the Evolution of the Microstructure in Melt-Conditioned Direct-Chill Cast Al Alloys. Materials and Manufacturing Processes, 29 (7). pp. 848-852. ISSN 1042-6914

Awang Shri, Dayangku Noorfazidah and Tsuchiya, Koichi and Yamamoto, Akiko (2014) Cytocompatibility Evaluation and Surface Characterization of TiNi Deformed by High-pressure Torsion. Materials Science and Engineering: C, 43. pp. 411-417. ISSN 0928-4931

Ali, Gomaa A. M. and Fouad, Osama A. and Makhlouf, Salah A. and M. M., Yusoff and K. F., Chong (2014) Co3O4/SiO2 Nanocomposites for Supercapacitor Application. Journal of Solid State Electrochemistry, 18 (9). pp. 2505-2512. ISSN 1432-8488 (print); 1433-076 (online)

Ahamed, Nizam Uddin and Ahmed, Nasim and Ali, Md. Sharafat and Ahmad, Badlishah and Rahman, S. A. M. Matiur (2014) Analysis EDFA Gain in OCDMA System for Fiber-to-the-Home Network. International Journal of Microwave & Optical Technology (IJMOT), 9 (3). pp. 244-248. ISSN 1553-0396

Asnul Hadi, Ahmad and Naher, S. and Brabazon, D. (2014) The Effect of Direct Thermal Method, Temperature and Time on Microstructure of a Cast Aluminum Alloy. Materials and Manufacturing Processes, 29 (2). pp. 134-139. ISSN 1042-6914 (print), 1532-2475 (online)

Ahmad Nor Kasruddin, Nasir and Tokhi, M. O. (2014) A Novel Hybrid Bacteria-chemotaxis Spiral-dynamic Algorithm with Application to Modelling of Flexible Systems. Engineering Applications of Artificial Intelligence, 33. pp. 31-46. ISSN 0952-1976

Azmi, W. H. and Sharma, K. V. and Sarma, P. K. and R., Mamat and Shahrani, Anuar (2014) Comparison of Convective Heat Transfer Coefficient and Friction Factor of TiO2 Nanofluid flow in a tube with Twisted Tape Inserts. International Journal of Thermal Sciences, 81. pp. 84-93. ISSN 1290-0729

Asiah, Kassim and Ng, Lee Luan (2014) The Roles of Collaborative Dialogue in Enhancing Written Corrective Feedback Efficacy. Malaysia Journal of ELT Research, 10 (1). pp. 16-30. ISSN 1511-8002

Asnul Hadi, Ahmad and Naher, Sumsun and Brabazon, Dermot (2014) The Effect of Direct Thermal Method, Temperature and Time on Microstructure of a Cast Aluminium Alloy. Materials and Manufacturing Processes, 29 (2). pp. 134-139. ISSN 1532-2475

Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Z., Ismail and Kong, K. K. and Ong, Zhi Chao and Noroozi, Siamak and Chong, W. T. (2014) Impact Force Identification With Pseudo-Inverse Method on a Lightweight Structure for Under-Determined, Even-Determined and Over-Determined Cases. International Journal of Impact Engineering, 63. pp. 52-62. ISSN 0734-743X

Abdul Hafaz, Ngah and Yuserrie, Zainuddin and Thurasamy, Ramayah (2014) Adoption of Halal Supply Chain among Malaysian Halal Manufacturers: An Exploratory Study. Procedia - Social and Behavioral Sciences, 129. pp. 388-395. ISSN 1877-0428, ESSN: 1877-0428

Amir, Khalid and M. D., Anuar and M. Farid, Sies and B., Manshoor and Izzuddin, Zaman and Abdul Adam, Abdullah and R., Mamat (2014) Analysis of Mixture Formation and Flame Development in Biodiesel Burner Combustion Using Direct Optical Visualization Technique. Applied Mechanics and Materials, 663. pp. 8-12. ISSN 1662-7482

Afiza, Abdullah Suhaimi and Aziela, Latif and Rohayu, Ahmmad Romzay (2014) Application of Elaeis Guineensis Leaves in Palm Oil Mill Effluent Treatment. Indian Journal of Science and Technology, 7 (3). pp. 254-261. ISSN 0974-6846 (Print); 0974-5645 (Online)

Aikhuele, Daniel Osezua and Souleman, Fathi S. and Amir, Azizi (2014) Application of Fuzzy AHP for Ranking Critical Success Factors for the Successful Implementation of Lean Production Technique. Australian Journal of Basic and Applied Sciences, 8 (18). pp. 399-407. ISSN 1991-8178

Akbari, Abolghasem and Noram Irwan, Ramli and Ngien, S. K. and Reyhane, Azimi (2014) Application of Public Domain Satellite-based DEMs in Geohazard Modeling. APCBEE Procedia (6).

Ahmad Ziad, Sulaiman and Erna Wati, Ibnu Hajar and Mimi Sakinah, A. M. (2014) Assessment of Heavy Metals Tolerance in Leaves, Stems and Flowers of Stevia Rebaudiana plant. Procedia Environmental Sciences, 20. pp. 386-393. ISSN 1878-0296 (print); 1878-0296 (online)

Abdulbari, Hayder A. and Ainoon, Shabirin and Nour, A. H. (2014) Bio-polymers for Improving Liquid Flow in Pipelines - A Review and Future Work Opportunities. Journal of Industrial and Engineering Chemistry, 20 (4). pp. 1157-1170. ISSN 1226-086X

Ali, Eman N. (2014) Biosorption of Cd(II) from Water by Moringa Oleifera Leaves. Advanced Materials Research, 925. pp. 223-227. ISSN 1022-6680 (print), 1662-8985 (online)

Abeed Fatima, Mohidin Batcha and D. M. R., Prasad and Khan, Maksudur R. and Hamidah, Abdullah (2014) Biosynthesis of Poly (3-hydroxybutyrate)(PHB) by Cupriavidus Necator H16 from Jatropha Oil as carbon source. Bioprocess and Biosystems Engineering, 37 (5). pp. 943-951. ISSN 1615-7591 (print); 1615-7605 (online)

Abu Hannifa, Abdullah and Kamal, Yusoh and Mohamad Faiz, Mohamed Yatim and Siti Amirah, Nor Effendi and Wan Siti Noorhashimah, Wan Kamaruzaman (2014) Characterization Copper (II) Chloride Modified Montmorillonite filled PLA Nanocomposites. Advanced Materials Research, 858. pp. 13-18. ISSN 1022-6680 (print), 1662-8985 (online)

Akasyah, M Khathri and R., Mamat and Amir, Aziz and Azri, Alias and Nik Rosli, Abdullah (2014) Combustion Characteristic of a Diesel Engine Operating with Methanol as Alternative Fuel. Applied Mechanics and Materials, 660. pp. 452-456. ISSN 1662-7482

Ahmad Fitri, Yusop and R., Mamat and Mohd Hafizil, Mat Yasin and Abdul Adam, Abdullah and Amir, Aziz (2014) Comparative Study of Particulate Matter (PM) Emissions in Diesel Engine Using Diesel-Methanol Blends. Applied Mechanics and Materials, 465-46. pp. 1255-1261. ISSN 1662-7482

Abdullah Adnan, Mohamed and Noor Raha, Mohd Radzuan and Hafizoah, Kassim and Mohammad Musab, Azmat Ali (2014) Conceptualizing English Workplace Communication Needs of Professional Engineers: The Challenges for English Language Tertiary EducatorS. International Journal of Contemporary Business Management, 1 (1). pp. 1-9.

Azizan, Ramli and Mazlin, Mokhtar and Badhrulhisham, Abdul Aziz and Nor Azman, Ngah (2014) The Cooperative Approach in Managing Safety Issues for Halal Industrial Parks in Malaysia: Embracing Opportunity. Progress in Industrial Ecology, an International Journal, 8 (4). pp. 295-318. ISSN 1476-8917 (Print) 1478-8764 (Online)

Azri, Alias and Kenya, Kuwagi and Atsuto, Kogane and Hiroyuki, Hirano and Toshihiro, Takami (2014) DEM-CFD Simulations for Various Fluidizations. International Journal of Chemical and Environmental Engineering, 5 (1). pp. 15-17. ISSN 2078-0737

Amir, Azizi (2014) A Decision Model to Assess Current Methods in Capacity Planning for Semiconductor Industry. Australian Journal of Basic and Applied Sciences, 8 (15 (Sp). pp. 319-325. ISSN 1991-8178

Azizan, Ramli and Mazlin, Mokhtar and Badhrulhisham, Abdul Aziz (2014) The Development of An Initial Framework for Multi-Firm Industrial Safety Management Based On Cooperative Relationship: A Malaysia Case Study. International Journal of Disaster Risk Reduction. pp. 1-13. ISSN 2212-4209

Azwin Arif, Abdul Rahim and Nor Yazi, Khamis and Mohammad Musab, Azmat Ali and Mohd Shafeirul Zaman, Abd Majid and Supyan, Hussin and Mohamed Amin, Embi (2014) Development of Self Access Internet Based English Module to Support Student Centred Learning (SCL) of Engineering Education. Asian Social Science, 10 (7). pp. 153-162. ISSN 1911-2017 (Print); 1911-2025 (Online)

Ahmad Rasdan, Ismail and Isa, Halim and Hambali, Arep and Seri Rahayu, Kamat and Rohana, Abdullah and Abdul Rahman, Omar (2014) Development of a Decision Support System for Analysis and Solutions of Prolonged Standing in the Workplace. Safety and Health at Work, 5 (2). pp. 97-105. ISSN 2093-7911

Almfraji, Mohammad Amin and Almsafir, Mahmoud Khalid and Liu, Yao (2014) Economic Growth and Foreign Direct Investment Inflows: The Case of Qatar. Procedia Social and Behavioral Sciences, 109. pp. 1040-1045. ISSN 1877-0428 (print); 1877-0428 (online)

Asmadi, Ali and R. M., Yunus and Mohamad, Awang and Anwar, Johari and Ramli, Mat (2014) Effect of Cellulose Acetate Phthalate (CAP) on Characteristics and Morphology of Polysulfone/Cellulose Acetate Phthalate (PSf/CAP) Blend Membranes. Applied Mechanics and Materials, 493. pp. 640-644. ISSN 1662-7482

A., Hameed and Oudah, Ali A. (2014) Effect of Information and Communication Technology on Career Results: Does Knowledge Sharing Matter? Journal of Engineering and Applied Sciences, 9 (5). pp. 153-162. ISSN 1816-949x (Print); 1818-7803 (Online)

Abdoullah, Namdar and Fadzil, Mat Yahaya (2014) The Effect of Nanoparticles of Ordinary Portland Cement (OPC) on Compressive Strength of Concrete. Advanced Materials Research, 894. pp. 342-348. ISSN 1022-6680 (print), 1662-8985 (online)

Abdoullah, Namdar and Fadzil, Mat Yahaya and Chua, Pei Shan and Nabila Shahilla, Rajagopal (2014) Effect of Seashell Powder on Flexural and Compressive Strength of Cement Mortar in Early Age. Advanced Materials Research, 894. pp. 65-69. ISSN 1022-6680 (print), 1662-8985 (online)

Amir, Aziz and Asraf, Jusoh and R., Mamat and Abdul Adam, Abdullah (2014) Effect of Water Content and Tween 80 to the Stability of Emulsified Biodiesel. Applied Mechanics and Materials, 465 (466). pp. 191-195. ISSN 1662-7482

Asmara, Y. P. and Juliawati, Alias and J., Jaafar and K., Azuar and J. P., Siregar and Kurniawan, Tedi (2014) Effects Pre-strain of Carbon Steel on Stress-Strain Diagram in CO2 Environment with the Presence of H2S. International Journal of Material Science Innovations (IJMSI), 2 (3). pp. 52-58. ISSN 2289-4063

Asnul Hadi, Ahmad and Naher, Sumsun and Brabazon, D. (2014) Effects of Cooling Rates on Thermal Profiles and Microstructure of Aluminium 7075. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1685-1694. ISSN 2180-1606

Ahmad Fitri, Yusop and R., Mamat and Mohd Hafizil, Mat Yasin and Ali, Obed M. (2014) Effects of Particulate Matter Emissions of Diesel Engine using Diesel–Methanol Blends. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 959-967. ISSN 2289-4659 (print); 2231-8380 (online)

Ahmad Fitri, Yusop and R., Mamat and Mohd Hafizil, Mat Yasin and Shafiq, Suhaimi (2014) Effects of the Inlet Velocity Profiles on the Prediction of Velocity Distribution inside an Electrostatic Precipitator (ESP). International Journal of Computer and Electrical Engineering, 6 (1). pp. 64-66. ISSN 1793-8163

Asmara, Y. P. and Siregar, J. P. and Tezara, C. and Juliawati, Alias (2014) Electrochemical Behaviour of High Stress Steel (AISI 4340) in CO2 Environments with the Presence of H2 Gas. Applied Mechanics and Materials, 695. pp. 98-101. ISSN 1662-7482

Ali, Gomaa A. M. and Ling, Tanling and Rajan, Jose and M. M., Yusoff and K. F., Chong (2014) Electrochemical Performance Studies of MnO2 Nanoflowers Recovered from Spent Battery. Materials Research Bulletin, 60. pp. 5-9. ISSN 0025-5408

Achmad Fauzi, Abdul Wahab and Irsyam, Masyhur and Fauzi, Usama Juniansyah (2014) Empirical Correlation of Shear Wave Velocity And N-Spt Value for Jakarta. International Journal of GEOMATE, 7 (1). pp. 980-984. ISSN 2186-2982 (print); 2186-2990(online)

Azwin Arif, Abdul Rahim and Mohamed Amin, Embi and Rosseni, Din (2014) English for Specific Academic Purposes Mobile Learning Framework for Technical and Engineering Context: A Conceptual Framework. World Applied Sciences Journal, 30 (14). pp. 47-55. ISSN 1818-4952

Ali, Abdalla A. M. and Zulkefli, Yaacob and Nour, A. H. (2014) Enhanced Oil Recovery Techniques Miscible and Immiscible Flooding. Journal of Applied Sciences , 14 (10). pp. 1016-1022. ISSN 1812-5654

Abdullah, Bawadi and Vo, Dai-Viet N. (2014) An Evaluation of Fish Scales as Potential Adsorbents:pH and Concentration Effect. Applied Mechanics and Materials, 625. pp. 73-76.

Anwar, Ahmad and Rumana, Ghufran (2014) Evaluation of the Bio-Kinetics of Cement Kiln Dust In An Upflow Anaerobic Sludge Blanket Reactor for Treatment of Palm Oil Mill Effluent As A Function of Hydraulic Retention Time. Separation and Purification Technology, 133. pp. 129-137. ISSN 1383-5866

Amir, Aziz and Wong, Chung Siong and R., Mamat and Hagos, F. Y. (2014) Exhaust Emissions Reduction Of Diesel Engine Fueled With Emulsified Palm Oil Methyl Esters. Applied Mechanics and Materials, 660. pp. 457-461. ISSN 1662-7482

Abd Rasha, Mohammed and Nour, A. H. and Ahmad Ziad, Sulaiman (2014) Experimental Investigation on Dynamic Viscosity and Rheology of Water-Crude Oil Two Phases FlowBehavior at Different Water Volume Fractions. American Journal of Engineering Research (AJER), 3 (3). pp. 113-120. ISSN 2320-0936(Print); 2320-0847(Online)

Aznilnda, Zainodin and Aida Khairunisa, Ab. Kadir and M. Nasir, Ayob and Ahmad Fariz, Hasan and Amar Faiz, Zainal Abidin and Fazlinashatul Suhaidah, Zahid and Hazriq Izuan, Jafar and Ismail, Mohd Khairuddin (2014) An Experimental Study Of Combinational Logic Circuit Minimization Using Firefly Algorithm. Coloquium on Robotics, Unmaned Systems And Cybernetics 2014 (CRUSC 2014). pp. 17-21.

Ahmad Jahed, Mushtaq and Zuraina, Ali (2014) Factors Increase Interest of Undergraduates to English Newspapers in Al-Beroni University of Afghanistan. IOSR Journal of Humanities and Social Science, 19 (4). pp. 67-71. ISSN 2279-0845 (print), 2279-0837 (online)

Abdullah, Zailani and Herawan, Tutut and Noraziah, Ahmad and Mustafa, Mat Deris (2014) Fast Determination of Items Support Technique from Enhanced Tree Data Structure. International Journal of Software Engineering and Its Applications (IJSEIA), 8 (1). pp. 21-32. ISSN 1738 - 9984

Azhari, H. Nour and M. M., Yusoff and Mohammed, S. B. and Nour, A. H. and Mazza, A. S. (2014) Growth Inhibitory Effect On Bacteria Of Swietenia Macrophylla King Seeds And Leaves Crude Alkaloid Extracts. International Journal of Pharmaceutical Sciences and Research , 5 (8). pp. 3204-3208. ISSN 2320-5148 (print); 0975-8232 (online)

Amira, Abdullah (2014) Halal vs Haram Dalam Berfesyen. Qiyam (6). pp. 32-33. ISSN 2180-3331

Azmi, W. H. and Sharma, K. V. and Sarma, P. K. and R., Mamat and G., Najafi (2014) Heat Transfer and Friction Factor of Water Based TiO2 and SiO2 Nanofluids Under Turbulent Flow In a Tube. International Communications in Heat and Mass Transfer, 59. pp. 30-38. ISSN 0735-1933

Ali, Md. Eaqub and Rahman, Md. Motiar and Sarkar, Shaheen M. and Abd Hamid, Sharifah Bee (2014) Heterogeneous Metal Catalysts for Oxidation Reactions. Journal of Nanomaterials, 2014 (Articl). pp. 1-23. ISSN 1687-4110 (print); 1687-4129 (online)

Al-Ezzi, Ali Abdul Rahman and Najmuldeen, Ghazi Faisal and K., Ramesh (2014) Hydrodynamic Characteristics in Internal Air Lift Loop Reactor. World Applied Sciences Journal, 21 (11). pp. 1930-1937. ISSN 1818-4952

Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Zubaidah, Ismail and Kong, Keen Kuan and Ong, Zhi Chao and Chong, Wen Tong and Siamak, Noroozi (2014) Impact Force Identification Using the Modal Transformation Method in Collocated and Noncollocated Cases. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 968-974. ISSN 2289-4659 (print); 2231-8380 (online)

Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Zubaidah, Ismail and Kong, Keen Kuan and Ong , Zhi Chao and Chong, Wen Tong and Siamak, Noroozi (2014) Impact Force Identification using the Modal Transformation Method in Collocated and Non-Collocated Cases. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 968-974. ISSN 2289-4659 (print); 2231-8380 (online)

Akbari, Abolghasem and Mozafari, Golamali and Fanodi, Mohsen and Sadat Hemmesy, Maliheh (2014) Impact of Landuse Change on River Floodplain Using Public Domain Hydraulic Model. Modern Applied Science, 8 (5). pp. 80-86. ISSN 1913-1844 (printed), 1913-1852 (online)

Ali, Eman N. and Tan, C. S. and Makky, Essam A. (2014) Impact of Moringa oleifera Cake Residue Application on Waste Water Treatment: A Case Study. Journal of Water Resource and Protection, 6. pp. 677-687. ISSN 1945-3094 (print); 1945-3108 (online)

Ahmad Rasdan, Ismail and Che Mohammad Nizam, Che Kamaruddin and Mohd Hanifiah, Mohd Haniff and Baba, Md Deros (2014) The Impact of Workers Productivity Under Simulated Environmental Factor by Taguchi Analysis. APCBEE Procedia, 10. pp. 263-268. ISSN 2212-6708

A., Hameed and Oudah, Ali A. (2014) Improved MMSE Scheme in Cooperative Base Station Systems. Asian Journal of lnformation Technology, 13 (10). pp. 646-652. ISSN 1682-3915 (Print); 1993-5994 (Online)

A., Hameed and Oudah, Ali A. (2014) Improved Methodology for Mobile Commerce Applications. International Journal of Software Engineering and Its Applications (IJSEIA), 8 (8). pp. 29-42. ISSN 1738 - 9984

Akhtar, Muhammad Nadeem and Abu, Nadiah and Nurul Elyani, Muhammad and Swee, Keong Yeap and Tangarajoo, Nirosha and Abdul Rahman, Omar (2014) In vitro Toxicity and in vivo Immunomodulatory Effects of Favokawain A and Flavokawain B in Balb/C Mice. Natural Product Communications. ISSN 1934-578X (print); 1555-9475 (online)

Akhtar, Muhammad Nadeem and Abu, Nadiah and Kian, Lam Lim and Swee, Keong Yeap and Nurul Elyani, Muhammad and Beh, Boon Kee (2014) In vivo Antitumour and Antimetastic effects of Flavokawain B in 4T1 Breast Cancer Cell Challenged Mice. Drug Design, Development and Therapy, 8 (1-17). ISSN 1177-8881

Akbari, Abolghasem and Azimi, Rehayne and Noram Irwan, Ramli (2014) Influence of Slope Aspects and Depth on Soil Properties in a Cultivated Ecosystem. The Electronic Journal of Geotechnical Engineering (EJGE), 19. pp. 8601-8608. ISSN 1089-3032

Asnul Hadi, Ahmad and S., Naher and D., Brabazon (2014) Injection Tests and Effect On Microstructure and Properties of Aluminium 7075 Direct Thermal Method Feedstock Billets. Materials Science and Engineering, 611-612. pp. 1637-1644.

Ali, A. J. Adham and Khaled Abdul Rahman, Jomaa and Alsibai, Mohammed Hayyan (2014) An Integrated Model to Enhance the Transportation Methods in Malaysia: Review Paper. Journal of Applied Science and Agriculture, 9 (18). pp. 88-94. ISSN 1816-9112

Amir, Azizi (2014) Integration of Seasonal Autoregressive Integrated Moving Average and Bayesian Methods to Predict Production Throughput Under Random Variables. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1236-1250. ISSN 2289-4659 (print); 2231-8380 (online)

Asiah, Kassim and Lee, Luan Ng (2014) Investigating the Efficacy of Focused and Unfocused Corrective Feedback on the Accurate Use of Prepositions in Written Work. English Language Teaching, 7 (2). pp. 119-130. ISSN 1916-4742

Abdoullah, Namdar and Fadzil, Mat Yahaya and Kok, Jun Jie and Lim, Yeng Ping (2014) An Investigation on Effect of Oil Palm Shell Ash on Flexural Strength and Compressive Strength of Cement Mortar. Advanced Materials Research, 894. pp. 55-59. ISSN 1022-6680 (print), 1662-8985 (online)

Ahmad Murad, Zainuddin and Zailin Shah, Yusoff and Mansor, Sulaiman and Ahmad Irfan, Ikmal Hisham and Abdullah, Long (2014) Is Assisted Reproductive Technique Shari'aa-compliant? A Case Study at a Fertility Centre in Malaysia. The International Medical Journal Malaysia, 13 (2). pp. 21-27. ISSN 1823-4631

Amira, Abdullah (2014) Kerja Berkat Hidup Selamat. Qiyam (6). pp. 27-28. ISSN 2180-3331

Akhtar, Muhammad Nadeem and Sahrim, Ahmad and Rozaidi, Rasid (2014) Mechanical, Thermal and Morphological Properties of Poly(lactic acid)/Epoxidized Natural Rubber Blends. Journal of Elastomers & Plastics, 46 (4). pp. 338-354. ISSN 0095-2443 (print); 1530-8006 (online)

A .A., Azharin Shah and Nour, A. H. and R. M., Yunus (2014) Methodology to Produce Hard Coherent Water Adsorbent Using Modified Fusion Method. Australian Journal of Basic and Applied Sciences, 8 (4). pp. 235-240. ISSN 1991-8178

Arman, Abdullah and Nordin, Yahaya and Norhalizan, Md Noor and Rosilawati, Mohd Rasol (2014) Microbial Corrosion of API 5L X-70 Carbon Steel by ATCC 7757 and Consortium of Sulfate-Reducing Bacteria. Journal of Chemistry, 2014. pp. 1-7. ISSN 2090-9063 (Print); 2090-9071 (Online)

A. N., Oumer and Bachtiar, Dandi (2014) Modeling and Experimental Validation of Tensile Properties of Sugar Palm Fiber Reinforced High Impact Polystyrene Composites. Fibers and Polymers, 15 (2). pp. 334-339. ISSN 1229-9197 (Print); 1875-0052 (Online)

Abdullah, Bawadi and Vo, Dai-Viet N. and Chowdhury, Sujan (2014) Modeling the Effect of Temperature-induced Surface Tension Gradient in Coating Processes. Advanced Materials Research, 917. pp. 181-188. ISSN 1022-6680 (print), 1662-8985 (online)

Ali, Eman N. (2014) Moringa oleifera Leaves Possible Uses as Environmentally Friendly Material: A Review. International Journal of Chemical, Environmental and Biological Sciences (IJCEBS), 2 (2). pp. 160-164. ISSN 2320-4079 (printed); 2320-4087 (online)

A. S. N., Huda and S., Taib and Kamarul Hawari, Ghazali and M. S., Jadin (2014) A New Thermographic NDT for Condition Monitoring of Electrical Components Using ANN with Confidence Level Analysis. ISA Transactions, 53 (3). pp. 717-724. ISSN 0019-0578

Ali, A. J. Adham and Ahmad Nazif, Noor Kamar (2014) A Novel Method to Develop an Automobile Assembly Line System. International Journal of the Physical Sciences, 9 (19). pp. 430-437. ISSN 1992-1950

A., Hameed and Oudah, Ali A. and Izzeldin, I. Mohd (2014) Novel Microstrip Antenna Design. International Journal of Smart Home, 8 (6). pp. 191-196. ISSN 1975-4094

At-Tasneem, Mohd Amin and N. T., Rao and Tuan Mohammad Yusoff, Tuan Ya and M. S., Idris and N. M. M., Ammar (2014) Numerical Simulation of Multiple Arrays Arrangement of Micro Hydro Power Turbines. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 8 (5). pp. 929-935.

Alkasasbeh, Hamzeh Taha and Mohd Zuki, Salleh (2014) Numerical Solutions of Radiation Effect on Magnetohydrodynamic Free Convection Boundary Layer Flow about a Solid Sphere with Newtonian Heating. Applied Mathematical Sciences, 8 (140). pp. 6989-7000. ISSN 1314-7552 (print); 1312-885X (online)

A., Hameed and Oudah, Ali A. (2014) On The Impact of User Payload on Deployment Requirements of LTE Networks. Wseas Transactions On Communications, 13. pp. 348-354. ISSN 2224-2864

Akasyah, M Khathri and R., Mamat and Amir, Aziz and Azri, Alias and Nik Rosli, Abdullah (2014) One-Dimensional Simulation of the Combustion Process in an Engine Cylinder with Ethanol. Applied Mechanics and Materials, 660. pp. 447-451. ISSN 1662-7482

Anwar, P. P. Abdul Majeed and Siti Hajar, Mohd Yusop and Mohd Nor Azmi, Ab Patar and Jamaluddin, Mahmud (2014) A Parametric Investigation on the Neo-Hookean Material Constant. Advanced Materials Research, 915-916. pp. 853-857. ISSN 1022-6680 (print), 1662-8985 (online)

Abdul Syukor, Abd Razak and Zularisam, A. W. and Ideris, Zakaria and Mohd Ismid, M. S. and Nakmal, H. M. and Suryati, Sulaiman and Hasmanie, Abdul Halim and Siti Norsita, M. R. and Nasrullah, M. (2014) Performance of Phytogreen Zone for BOD5 and SS Removal for Refurbishment Conventional Oxidation Pond in an Integrated Phytogreen System. International Journal of Environmental, Earth Science and Engineering, 8 (3). pp. 11-16.

Abdul Syukor, Abd Razak and Suryati, Sulaiman (2014) The Potential of Empty Fruit Bunch (EFB) as Artificial Bait for Subteranean Termite: Pisoptera. Energy Education Science and Technology Part A: Energy Science and Research, 32 (1). pp. 325-338. ISSN 1308-772X

Anwar, P. P. Abdul Majeed and Asrul Khairi, Sohaimi and Jamaluddin, Mahmud (2014) Preliminary Numerical Analysis of a Platform Structure. Applied Mechanics and Materials, 680. pp. 280-283. ISSN 1662-7482

Azizan, Ramli and Mazlin, Mokhtar and Badhrulhisham, Abdul Aziz (2014) A Preliminary Study on Industrial Safety Management in Malaysia: The Viewpoints of Safety Experts and Practitioners. Journal of Applied Science and Agriculture, 9 (11). pp. 53-62. ISSN 1816-9112

Andalib, Tarnima Warda (2014) A Process of Developing an HRM Framework Based on Qualitative Study in Technology Companies in Bangladesh and Malaysia. International Journal of Research in Business and Social Science, 3 (2). pp. 148-163. ISSN 2147-4478

Abdul Qahar, Sarwari and Ainol Haryati, Ibrahim and Nor Ashikin, Abdul Aziz (2014) The Process of Interactions among Students of Different Cultures and Nationalities at a Malaysian Public University and Its Effects on Their Academic and Personal Lives. IOSR Journal of Humanities and Social Science, 19 (5). pp. 122-126. ISSN 2279-0845 (print), 2279-0837 (online)

Ali, Abdalla A. M. and Hawege, Emsalem Faraj and Almatar, Manaf and Heyam, I. M. Al-Astal and Aladdin, Azzam (2014) Production of Xylanase Enzyme from AspergillusTerreus SUK-1. International Journal of ChemTech Research, 6 (11). pp. 4884-4889. ISSN 0974-4290

Achmad Fauzi, Abdul Wahab and Fauzi, Usama Juniansyah and Hendriyawan and Sengara, Wayan and Irsyam, Masyhur (2014) Propose of Indonesia Seismic Hazard Deaggregation Maps for Sumatera, Indonesia. Journal of Civil Engineering and Architecture, 8 (1). pp. 1-8. ISSN 1934-7359

Ayoob, Ayoob A. and Norrozila, Sulaiman and Mohammed, Muamer N. and Ghaida M., Abdilsahib (2014) Reduction the Effect of Mobility in Link Transmitting Using Efficient DSR Route Cache for MANETs. Journal of Advances in Computer Networks, 2 (4). pp. 254-260. ISSN 1793-8244

A., Hameed and Oudah, Ali A. (2014) The Relationships Between Wireless Network Communication, It Flexibility, It Architecture, And Strategic Alignment: An Empirical Study. Journal of Theoretical and Applied Information Technology, 67 (2). pp. 504-512. ISSN 1992-8645 (print); 817-3195 (online)

Abu Zaharin, Ahmad and Shalash, Nadheer A. (2014) Reliability Assessment for Tie Line Capacity Assistance of Power Systems Based on Multi-Agent System. International Journal of Electrical, Electronic Science and Engineering, 8 (2). pp. 236-243. ISSN 9997398

Ali, Eman N. and Alfarra, Sabreen R. and M. M., Yusoff (2014) Removal of Heavy Metals by Natural Adsorbent: Review. International Journal of Biosciences (IJB), 4 (7). pp. 130-139. ISSN 220-6655 (Print); 2222-5234 (Online)

A., Hameed and Oudah, Ali A. (2014) Rerouting Techniques in ATM Networks. International Journal of Future Generation Communication and Networking, 7 (4). pp. 59-70. ISSN 2233-7857

Azimah, Saman and Mimi Sakinah, A. M. (2014) Resistance in Series Model for Ultrafiltration of Betacyanin from Hylocereus Polyrhizus Peels. Journal of Applied Sciences, 14 (12). pp. 1343-1346. ISSN 1812-5654 (print); 1812-5662 (online)

A. R., Yusoff and Mohamad Syahmi, Shahrom (2014) Review of Aluminum Chip Machining Using Direct Recycling Process. Advanced Materials Research, 903. pp. 157-162. ISSN 1022-6680 (print), 1662-8985 (online)

Abbas, Ali A. and Sharifah Maszura, Syed Mohsin and Cotsovos, Demetrios M. (2014) Seismic Response of Steel Fibre Reinforced Concrete Beam-Column Joints. Engineering Structures, 59. pp. 261-283. ISSN 0141-0296

Amidi, Osman (2014) Solat Dhuha Rahsia Rezeki Melimpah, Halal & Berkat. Qiyam (6). p. 35. ISSN 2180-3331

Ayib Rosdi, Zainun and M. F., Malek and Mohd Hafizan, Mamat and Z., Khusaimi and M. Z., Sahdan and M. Z., Musa and A. B., Suriani and N. D., Md Sin and S. B., Abd Hamid and M., Rusop (2014) Sonicated Sol-gel Preparation of Nanoparticulate ZnO Thin Films with Various Deposition Speeds: The highly Preferred c-axis (0 0 2) Orientation Enhances the Final Properties. Journal of Alloys and Compounds, 582. pp. 12-21. ISSN 0925-8388 (print); 1873-4669 (online)

Abbas, Ali A. and Sharifah Maszura, Syed Mohsin and Cotsovos, Demetrios M. and Ruiz-Teran, Ana M. (2014) Statically-Indeterminate SFRC Columns under Cyclic Loads. Advances in Structural Engineering, 17 (10). pp. 1403-1418. ISSN 1369-4332

Azhani, Zukri and Nadiatul Adilah, Ahmad Abdul Ghani (2014) A Study of Soil Stabilization by Hydrated Lime at Kampung Kedaik Asal, Rompin, Pahang, Malaysia. Applied Mechanics and Materials, 695. pp. 738-741. ISSN 1662-7482

At-Tasneem, Mohd Amin and Wan Mohamad , Azam and Ummu Kulthum, Jamaludin (2014) A Study on the Effect of Flow Rate on the Power Generated by a Pico Hydro Power Turbine. World Applied Sciences Journal. pp. 420-423. ISSN 1818-4952

Azmir, Azhari and Schindler, Christian and Nkoumbou, Jhislain and Kerscher, Eberhard (2014) Surface Erosion of Carbon Steel 1045 During Waterjet Peening. Journal of Materials Engineering and Performance, 23 (5). pp. 1870-1880. ISSN 1059-9495

Akhtar, Muhammad Nadeem and Siddiqui, Sabahat Zahra and Abbasi, Muhammad Athar and Rehman, Aziz-ur and Irshad, Misbah and Shahzad, Babar and Mohd Ashraf, Ahmad and Ahmad, Irshad and Lodhi, Muhammad A. and Mirza, Bushra and Ismail, Hammad (2014) Synthesis Pharmacological Evaluation, Molecular Docking And Cytotoxicty Studies On Some N-Substituted 5-[(4-Chlorophenoxy)Methyl]-1,3,4-Oxadiazole-2yl-2-Sulfanyl Acetamides. Indo American Journal Of Pharmaceutical Research, 4 (8). pp. 3603-3617. ISSN 2231-6876

Akbari, Sweeta and Gupta, Arun and Khan, Tanveer Ahmed and Saidatul Shima, Jamari and Norlirabiatuladawiyah, Che Ani and Poddar, Pradeep Kumar (2014) Synthesis and Characterization of Medium Density Fiber Board by Using Mixture of Natural Rubber Latex and Starch as an Adhesive. Journal of the Indian Academy of Wood Science. pp. 1-7. ISSN 0972-172X(Print); 0976-8432(Online)

Alaa, Ali and Kamal, Yusoh and S. F., Hasany (2014) Synthesis and Physicochemical Behaviour of Polyurethane-Multiwalled Carbon Nanotubes Nanocomposites Based on Renewable Castor Oil Polyols. Journal of Nanomaterials, 2015 (564384). pp. 1-9. ISSN 1687-4110 (print); 1687-4129 (online)

Akhtar, Muhammad Nadeem and Rehman, Aziz-ur and Siddiqa, Asia and Abbasi, Muhammad Athar and Rasool, Shahid and Lodhi, Muhammad A. and Nafeesa, Khadija and Khan, Ajmal (2014) Synthesis, Characterization and Urease Inhibiting Derivatives of 5-(3,4-Methylenedioxyphenyl)-1,3,4-Oxadiazol-2-thiol. Asian Journal of Chemistry , 26 (15). pp. 4605-4609. ISSN 0970-7077

A., Hameed and Abdulrazak, Lway Faisal (2014) Terrestrial-To-Satellite Interference In The C band: Tractable Calculation Technique. Journal of Theoretical and Applied Information Technology, 65 (3). pp. 762-769. ISSN 1992-8645 (print); 817-3195 (online)

Abdul Syukor, Abd Razak and Suryati, Sulaiman (2014) Treatment Of Industrial Wastewater Using Eichornia Crassipes, Pistia Stratiotes and Salvinia Molesta In Phytogreen System. Energy Education Science and Technology Part A: Energy Science and Research, 32 (1). 339-346 . ISSN 1308-772X

Abdul Syukor, Abd Razak and Zularisam, A. W. and Ideris, Zakaria and Mohd. Ismid, Mohd. Said and Suryati, Sulaiman (2014) Treatment of Industrial Wastewater in Gebeng Area, Kuantan Pahang using Phytogreen System. Energy Education Science and Technology Part A: Energy Science and Research, 32 (1). pp. 347-354. ISSN 1308-772X

Abid, Hussanan and Mohd Zuki, Salleh and Razman, Mat Tahar and Khan, Ilyas (2014) Unsteady Boundary Layer Flow and Heat Transfer of a Casson Fluid past an Oscillating Vertical Plate with Newtonian Heating. Heat Transfer of a Casson Fluid with Newtonian Heating, 9 (10). pp. 1-9.

Ali, Eman N. and Tan, Chu Shan and Makky, Essam A. and Al-Matar, Manaf (2014) The Use of Moringa Oleifera Seed as a Natural Coagulant for Wastewater Treatment and Heavy Metals Removal. Jokull Journal, 64 (8). pp. 189-200. ISSN 0449-0576

Abdoullah, Namdar and Fadzil, Mat Yahaya and M. M., Yusoff (2014) Using High Temperature for Improve Compressive Strength of Ordinary Portland Cement Paste (OPC) – A New Approach. Advanced Materials Research, 894. pp. 70-76. ISSN 1022-6680 (print), 1662-8985 (online)

Anwar, P. P. Abdul Majeed and Abdul Aziz, Jaafar and Sapuan, S. M. and Shahnor, Basri (2014) Velocity Measurements Using High-Speed Imaging System for Impact Test. Advanced Materials Research, 903. pp. 187-193. ISSN 1022-6680 (print), 1662-8985 (online)

Abd Jalil, Borham (2013) Malaysian Experience In Implementation Of The Banking And Financial Transactions Without Riba. International Journal of Research In Social Sciences, 3 (2). pp. 40-47. ISSN 2307-227X

Abd Jalil, Borham and Munira, Abdul Razak (2013) Women As The Catalyst Of Human Capital Development: A Case Study In Malaysia. The International Journal of Social Sciences (TIJOSS), 16 (1). pp. 29-45. ISSN 2305-4557

Abd Jalil, Borham (2013) Development Module of Holistic Leadership Training in Facing of Global Challenges. International Journal of Education and Research, 1 (9). pp. 1-8. ISSN 2201-6740

Abd Jalil, Borham (2013) The Influence of Turkish Ottoman Islamic Civil Law in 19th Century in the State of Johor, Malaysia. American International Journal of Contemporary Research, 3 (8). pp. 59-62. ISSN 2162-142X

Akhtar, Muhammad Nadeem and Seema, Zareen and Swee, Keong Yeap and Wan, Yong Ho and Kong, Mun Lo and Hasan, Aurangzeb and Noorjahan Banu, Alitheen (2013) Total Synthesis, Cytotoxic Effects of Damnacanthal, Nordamnacanthal and Related Anthraquinone Analogues. Molecules, 18 (8). pp. 10042-10055. ISSN 1420-3049 (print); 1420-3049 (online)

Abd Jalil, Borham (2013) The Relationship Between Turkey And Malaysia In 19th Century And The Impact Of Implementation Of Majalah Ahkam Johor. The International Journal of Social Sciences (TIJOSS), 013 (1 -- 2013). pp. 46-50. ISSN 2305-4557

Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Zubaidah, Ismail and Chong, Wen Tong and Noroozi, Siamak (2013) Impact Force Identification by Using Modal Transformation Method in Collocated and Non-Collocated Cases. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 968-974. ISSN 2289-4659 (print); 2231-8380 (online)

Asmara, Y. P. and Juliawati, Alias and Ahmad Shahrizan, Sulaiman and Jamiluddin, Jaafar (2013) Mechanistic Model of Stress Corrosion Cracking (SCC) of Carbon Steel in Acidic Solution with Presence of H2s. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online)

Akhtar, Muhammad Nadeem and Nadiah, Abu and Wan, Yong Ho and Swee, Keong Yeap and Noorjahan Banu, Alitheen (2013) 3-Bromo-1-Hydroxy-9,10-Anthraquinone (BHAQ) Inhibits Growth and Migration of the Human Breast Cancer Cell Lines MCF-7 and MDA-MB231. Molecules, 18 (9). pp. 10367-10377. ISSN 1420-3049 (print); 1420-3049 (online)

Amir, Azizi and Amir Yazid, Ali and Loh, Wei Ping (2013) An Adaptive Neuro-Fuzzy Inference System for a Dynamic Production Environment under Uncertainties. World Applied Sciences Journal, 25 (3). pp. 428-433. ISSN 1818-4952

Akhtar, Muhammad Nadeem and Shaik Ibrahim, Khalivulla and Lee, Ming-Tatt and Nordin, Lajis and Enoch Kumar, Perimal and Ahmad, Akira and Daud Israf, Ali and Mohd Roslan, Sulaiman (2013) Anti-hyperalgesic Effect of a Benzilidine-cyclohexanone Analogue on a Mouse Model of Chronic Constriction Injury-induced Neuropathic Pain: Participation of the κ-opioid Receptor and KATP. Pharmacology Biochemistry and Behavior, 114-115. pp. 58-63. ISSN 0091-3057 (print); 1873-5177 (online)

Akhtar, Muhammad Nadeem and Shahzadi, Tayyab and Abbasi, Muhammad Athar and Ur-Rehman, Aziz and Riaz, Tauheed and Khan, Khalid Mohammed and Mohd Ashraf, Ahmad and Afzal, Iftikhar and Ajaib, Muhammad (2013) Antioxidant and Lipoxygenase Inhibiting New Iridoid Glucosides from Caryopteris Odorata. Natural Product Research: Formerly Natural Product Letters, 27 (4-5). pp. 302-313. ISSN 1478-6419 (print); 1478-6427 (online)

Al-Sameraai, Raafat Salih Hadi and Zulkeflee, Kalidin and Kamarul Hawari, Ghazali and Zeehaida, Mohamed (2013) Automated Fecal Parasite Detection System. American Journal of Scientific Research, Issue . pp. 87-96. ISSN 2301-2005 (1450-223x)

Al-Sameraai, Raafat Salih Hadi and Kamarul Hawari, Ghazali and Zeehaida, Mohamed (2013) Automated System for Diagnosis Intestinal Parasites by Computerized Image Analysis. Modern Applied Science, 7 (5). pp. 98-114. ISSN 1913-1844 (printed), 1913-1852 (online)

Ali, Eman N. and Tay, Cadence Isis (2013) Characterization of Biodiesel Produced from Palm Oil via Base Catalyzed Transesterification. Procedia Engineering, 53. pp. 7-12. ISSN 1877-7058

Atabani, A. E. and Mahlia, T. M. I. and Masjuki, H. H. and Irfan Anjum, Badruddin and Wan Mohd Hafizuddin, Wan Yussof and Chong, W. T. and Teong Lee, Keat (2013) A Comparative Evaluation of Physical and Chemical Properties of Biodiesel Synthesized from Edible and Non-Edible Oils and Study on the Effect of Biodiesel Blending. Energy, 58. pp. 296-304. ISSN 0360-5442 (Print), 1873-6785 (Online)

A., Shamsudeen and S., Abdullah and A. K., Ariffin and Yusoff, Ali (2013) Design and Simulation of a Cylinder Head Structure for A Compressed Natural Gas Direct Injection Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1620-1629. ISSN 1985-9325(Print); 2180-1606 (Online)

Abd Jalil, Borham (2013) Development Framework on the Potential Personal Leadership in Realizing the Holistic Education. International Journal of Technology Management, 2. pp. 41-46. ISSN 2289-2753

Al-Dabbagh, Jinan B. and M., Ishak and Rozman, Mohd Tahar and Siti Aisyah, Harun (2013) Effect of the Milling Parameters on the Characteristics of Ti-50%Al Nanocrystallite Synthesized by Mechanical Alloying (MA). International Journal of Engineering Research & Technology (IJERT), 2 (8). pp. 2113-2119. ISSN 2278-0181

Ali, Abdul Rahman and Najmuldeen, Ghazi Faisal (2013) Effects of Adding Alcohols, Electrolytes and Carboxyl Methyl Cellulose (CMC) on Design Parameters in Internal Loop Airlift Bubble Column. International Journal of Engineering Sciences & Research Technology, 2 (12). pp. 3415-3426. ISSN 2277-9655

Achmad Fauzi, Abdul Wahab and Fauzi, Usama Juniansyah and Wan Mohd Nazmi, Wan Abdul Rahman (2013) Engineering Quality Improvement Of Kuantan Clay Subgrade Using Recycling And Reused Materials as Stabilizer. Procedia Engineering, 54. pp. 675-708. ISSN 1877-7058

Achmad Fauzi, Abdul Wahab and Zuraidah, Fauzi and Usama Juniansyah, Fauzi (2013) Evaluation of CBR Increase on Stabilized Kuantan Clay by Using Waste Glass, HDPE and Carpet Fiber. International Journal of Civil Engineering and Geo-Environmental, 4. pp. 9-13. ISSN 2180-2742

Azmi, W. H. and Sharma, K. V. and Sarma, P. K. and R., Mamat and Shahrani, Anuar and V. Dharma, Rao (2013) Experimental Determination of Turbulent Forced Convection Heat Transfer and Friction Factor with SiO2 Nanofluid. Experimental Thermal and Fluid Science, 51. pp. 103-111. ISSN 0894-1777

Adnan, M. Husein and R. A., Bakar and K., Kadirgama and K. V., Sharma (2013) Experimental Measurements of Nanofluids Thermal Properties. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 850-863. ISSN 1985-9325(Print); 2180-1606 (Online)

Akhtar, Muhammad Nadeem and Nadiah, Abu and Wan, Yong Ho and Swee, Keong Yeap and Mohd Puad, Abdullah and Abdul Rahman, Omar and Noorjahan Banu, Alitheen (2013) The Flavokawains: Uprising Medicinal Chalcones. Cancer Cell International, 13 (201). pp. 1-7. ISSN 1475-2867 (print); 1475-2867 (online)

Azizi, Amir and Sorooshian, Shahryar (2013) Fuzzy Bases. World Applied Sciences Journal, 26 (10). pp. 1335-1339. ISSN 1818-4952

Adnan Mohammed, Hussein and K. V., Sharma and R. A., Bakar and K., Kadirgama (2013) Heat Transfer Enhancement With Nanofluids – A Review. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 452-461. ISSN 2289-4659 (print); 2231-8380 (online)

Ade Chandra, Iwansyah and M. M., Yusoff (2013) Identifikasi Dan Kuantifikasi Asam Galat Sebagai Sumber Antioksidan Pada Ekstrak Daun Kacip Fatimah (Labisia pumila var. alata) Larut Air. Jurnal Aplikasi Teknologi Pangan, 2 (3). pp. 133-138.

A. R., Abdul Aziz and M. B., Nishazini and S., Fazira and Noor Azlinna, Azizan (2013) Impact Of A Special Protocol (Integrated Intravenous Care) To Reduce Intravenous Thrombophlebitis:Sharing The Experience Of Kpj Seremban Hospital Malaysia. Journal of Business and Management, 13 (5). pp. 60-64. ISSN 2319-7668

Anita, Abdul Rani and Imaduddin, Abidin and M. R., Abdul Hamid (2013) The Impact of Spiritual Intelligence on Work Performance: Case Studies in Government Hospitals of East Coast of Malaysia. The Macrotheme Review , 2 (3). pp. 46-59. ISSN 1848-4735

A. R., Abdul Aziz and M. B., Nishazini and Noor Azlinna, Azizan (2013) Improving Customer Satisfaction: Implementing Decentralised Inpatient Discharges At Ward Level. Journal of Business and Management, 12 (4). pp. 51-55. ISSN 2319-7668

Anuj, Kumar and Gupta, Arun and K. V., Sharma and Mohammed, Nasir and Khan, Tanveer Ahmed (2013) Influence of Activated Charcoal as Filler on the Properties of Wood Composites. International Journal of Adhesion and Adhesives, 46. pp. 34-39. ISSN 0143-7496

Asdarina, Yahya and R. M., Yunus (2013) Influence of Sample Preparation and Extraction Time on Chemical Composition of Steam Distillation Derived Patchouli Oil. Procedia Engineering, 53. pp. 1-6. ISSN 1877-7058

Azmah Hanim, Mohamad Ariff and Ourdjini, Ali and Saliza Azlina, Osman and Siti Rabiatull Aisha, Idris (2013) Intermetallic Evolution for Isothermal Aging up to 2000 Hours on Sn-4Ag-0.5Cu and Sn-37Pb Solders with Ni/Au Layers. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1348-1356. ISSN 1985-9325(Print); 2180-1606 (Online)

A. N. M., Rose and B. M., Deros and M. N., Ab. Rahman (2013) Lean Manufacturing Perceptions and Actual Practice Among Malaysian SME’s in Automotive Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 820-829. ISSN 1985-9325(Print); 2180-1606 (Online)

Azmi, W. H. and K. V., Sharma and R., Mamat and Shahrani, Anuar (2013) Nanofluid Properties For Forced Convection Heat Transfer: An Overview. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 397-408. ISSN 2289-4659 (print); 2231-8380 (online)

Anwar, P. P. Abdul Majeed and Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris and Nina Nadia, Sahim (2013) An Overview Of Sports Engineering: History, Impact And Research. Movement, Health & Exercise (MoHE), 2. pp. 1-14. ISSN 2231-9409

Ahmad Fitri, Yusop and Mohd Hafizil, Mat Yasin and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz (2013) PM Emission of Diesel Engines Using Ester-Ethanol-Diesel Blended Fuel. Procedia Engineering, 53. pp. 530-535. ISSN 1877-7058

Akhtar, Muhammad Nadeem and Mohd Nasier, Kamaldin and Azam Shah, Mohamad and Lajis, Nordin and Perimal, Enoch Kumar and Akira, Ahmad and Lee, Ming-Tatt and Israf, Daud Ahmad and Mohd Roslan, Sulaiman (2013) Peripheral Antinociception of a Chalcone, Flavokawin B and Possible Involvement of the Nitric Oxide/Cyclic Guanosine Monophosphate/Potassium Channels Pathway. Molecules, 18 (4). pp. 4209-4220. ISSN 1420-3049 (print); 1420-3049 (online)

Ainol Haryati, Ibrahim and Nuraihan, Mat Daud (2013) Public speaking anxiety in podcast aided language classes. World Applied Sciences Journal, 21 (Special). pp. 12-18. ISSN 1818-4952

A. R., Abd Aziz and M. B., Nishazini and Azlinna, Azizan (2013) Quality Improvement Culture in KPJ Seremban Specialist Hospital, Malaysia: The Impact of Total Quality Management. Asian Journal of Pharmaceutical and Health Sciences, 3 (3). pp. 774-778. ISSN 2231-234X

A. R., Razali and Qin, Yi (2013) A Review on Micro-manufacturing, Micro-forming and Their Key Issues. Procedia Engineering, 53. pp. 665-672. ISSN 1877-7058

Ali, A. J. Adham and Ahmad Nazif, Noor Kamar and Abdullah, Ibrahim and Sorooshian, Shahryar (2013) Simulation Model and Genetic Algorithm to Assembly Line Balancing. International Journal of Technology Management, 2. pp. 63-72. ISSN 2289-2753

AL-Duliamy, Mushtaq N. Ahmad and Hojabri, Mojgan and Hamdan, Daniyal and Humada, Ali Mahmood (2013) Simulation of Regulated Power Supply for Solar Photo-Voltaic Model. International Journal of Engineering Sciences & Research Technology, 2 (12). pp. 3607-3613. ISSN 2277-9655

Aizat, Alias and Mohammad Amirulkhairi, Zubir and Khairul Anuar, Shahid and Ahmad Baharuddin, Abdul Rahman (2013) Structural Performance of Grouted Sleeve Connectors with and without Transverse Reinforcement for Precast Concrete Structure. Procedia Engineering, 53. pp. 116-123. ISSN 1877-7058

Ali, Gomaa A. M. and Fouad, Osama A. and Makhlouf, Salah A. (2013) Structural, Optical and Electrical Properties of Sol–Gel Prepared Mesoporous Co3O4/SiO2 Nanocomposites. Journal of Alloys and Compounds, 579. pp. 606-611. ISSN 0925-8388 (print), 1873-4669 (online)

A. N. M., Rose and B. M., Deros and M. N., Ab. Rahman (2013) A Study on Lean Manufacturing Implementation in Malaysian Automotive Component Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1467-1476. ISSN 1985-9325(Print); 2180-1606 (Online)

Akhtar, Muhammad Nadeem and Yar, Muhammad and Mushtaq, Nafeesa and Afzal, Sadia and Khan, Abdul Samad and Khan, Islam Ullah and Seema, Zareen and Shahzad, Sohail Anjum and Khan, Zulfiqar Ali and Naqvi, Syed Ali Raza and Mahmood, Nasir and Tahir, Lubna (2013) Synthesis, Biological Evaluation and Study of the Effect of Various N-Substituents on the Thermal Stabilities of Some New Diethanolamine Derivatives. Asian Journal of Chemistry , 25 (13). pp. 7297-7304. ISSN 0970-7077

Ahmad Rasdan, Ismail and Shashi Kumar, S A Karagaratnan and K., Kadirgama (2013) Thermal Comfort Findings: Scenario At Malaysian Automotive Industry. Thermal Science, 17 (2). pp. 387-396.

Ahmad Rosli, Abdul Manaf and Mohd Zairulnizam, Mohd Zawawi and Nik Zuraida, Imran Adly (2013) Thin Walled Part Warping Overcoming by Honeycomb Ribs Design. Advanced Materials Research, 903. pp. 181-186. ISSN 1022-6680 (print), 1662-8985 (online)

A. R., Abdul Aziz and M. B., Nishazini and U., Azlina and Noor Azlinna, Azizan (2013) To See The Impact Of Various Interventions On Staff Knowledge And Compliances By Conducting Waste Audit In Kpj Seremban Specialist Hospital Malaysia. Journal Of Environmental Science, Toxicology And Food Technology , 5 (1). pp. 64-72. ISSN 2319-2399

Azmi, W. H. and Sharma, K. V. and R., Mamat and Shahrani, Anuar (2013) Turbulent Forced Convection Heat Transfer of Nanofluids with Twisted Tape Insert in a Plain Tube. Energy Procedia, 52. pp. 296-307. ISSN 1876-6102

Andrew, Yau-hau Tse (2012) Glossophobia of University Students in Malaysia. International Journal of Asian Social Science, 2 (11). pp. 2061-2073. ISSN 2226-5139

Abdullah, Adam and R., Mamat and Nur Atiqah, Ramlan and Yoshiyuki, Kidoguchi and Azran, Zafri (2012) Analysis of Straight Vegetable Oil (SVO) Spray Characteristics at End of Injection (EOI). Journal of Medical and Bioengineering, 1 (1). pp. 59-62. ISSN 2301-3796

Arulselvi, Uthayakumaran and Normah, Othman (2012) The Possible University-Industry Partnership between DRB-HICOM and University Malaysia Pahang. American Journal of Economics (Sp.). pp. 26-28. ISSN 2166-4951 (Print); 2166-496X (Online)

Andrew, Yau-hau Tse (2012) Impacts of Short Message Service Texting on University Students in Malaysia. Asian Social Science, 8 (1). pp. 107-110. ISSN 1911-2017

A. K., Azad (2012) A Comprehensive Study of Di Diesel Engine Performance Withvegetable Oil: An Alternative Bio-Fuel Source of Energy. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 576-586. ISSN 2229-8648 (Print); 2180-1606 (Online)

A., Zulkiple and Sharifah, Awang (2012) Derivation of a Reliable and Consistent Volume Delay Functions for Town Road Network Based on Users Feedback. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 7-11. ISSN 2180-2742

Amir, Al-Falahi and Yusoff, M. Z. and Diyar, I. Ahmed (2012) An Experimental Evaluation of Transient Flows in a Supersonic Gun Tunnel. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 701-712. ISSN 2229-8649 (Print); 2180-1606 (Online)

Ahmad, Othman and Safaria, Triantoro and Muhammad Nubli, Abdul Wahab (2012) Gender, Academic Rank, Employment Status, University Type and Job Stress among University Academic Staffs in Pahang, Malaysia and Jogjakarta, Indonesia Context. International Journal of Technology Management, 1. pp. 57-70. ISSN 2289-2753

Abdulbari, Hayder A. and Siti Nuraffini, Kamarulizam and Nour, A. H. (2012) Grafted Natural Polymer as New Drag Reducing Agent: An Experimental Approach. Chemical Industry & Chemical Engineering Quarterly, 18 (3). pp. 361-371.

Abdulbari, Hayder A. and Siti Nuraffini, Kamarulizam and R. M., Yunus and Gupta, Arun (2012) Introducing Slag Powder as Drag Reduction Agent in Pipeline: An Experimental Approach. Scientific Research and Essay , 7 (18). pp. 1768-1776. ISSN 1992-2248

Amir, Abdul Razak (2012) Library Structure of Dynamic Simulation for Combined Heat and Power Plant in Modelica Language. Applied Mechanics and Materials, 110 (111). pp. 4925-4931. ISSN 1662-7482

Ayib Rosdi, Zainun and Sakamoto, Tomoya and Uzer, Mohd Noor and Mohamad, Rusop and Ichimura, Masaya (2012) New Approach for Generating Cu2O/TiO2 Composite Films for Solar Cell Applications. Materials Letters, 66. pp. 254-256. ISSN 0167-577X

Ali, A. J. Adham and Razman, Mat Tahar (2012) Optimum Efficiency of the Production Line at the Automotive Industry. International Journal of Technology Management, 1. pp. 89-102. ISSN 2289-2753

Abdullah, A. Mamun and Hans-Peter, Heim and Beg, M. D. H. and S. Kim, Tan and Sahrim, H. Ahmad (2012) PLA and PP Composites with Enzyme Modified Oil Palm Fibre: A Comparative Study. Composites Part A: Applied Science and Manufacturing, 53. pp. 160-167. ISSN 1359-835X

Azhani, Zukri (2012) Pekan Soft Clay Treated With Hydrated Lime As A Method Of Soil Stabilizer. Procedia Engineering, 53. pp. 37-41. ISSN 1877-7058

Arkan Jasim, Hadi and Ghazi Faisal, Najmuldeen and Iqbal, Ahmed (2012) Polyolefins Waste Materials Reconditioning Using Dissolution/Reprecipitation Method. APCBEE Procedia, 3. pp. 281-286.

Azeddien, Kinsheel and Zahari, Taha and Abdelhakim, Deboucha and Tuan Mohammad Yusoff, Tuan Ya (2012) Robust Least Square Estimation Of The CRS A465 Robot Arm's Dynamic Model Parameters. Journal of Mechanical Engineering Research, 4 (3). pp. 89-99. ISSN 2141-2383

At-Tasneem, Mohd Amin and Sallehuddin, Mohamed Haris and Zulkifli, Mohd Nopiah (2012) Stability of a Switched Linear System. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 320-330. ISSN 2289-4659 (print); 2231-8380 (online)

A. K. M., Moshiul Alam and Beg, M. D. H. and Prasad, D. M. Reddy and Khan, Maksudur R. and M. F., Fina (2012) Structures and Performances of Simultaneous Ultrasound and Alkali Treated Oil Palm Empty Fruit Bunch Fiber Reinforced Poly(lactic acid) Composites. Composites Part A: Applied Science and Manufacturing, 43 (11). pp. 1921-1929. ISSN 1359-835X

Ainol Haryati, Ibrahim and Zailin Shah, Yusoff (2012) Teaching Public Speaking in a Blended Learning Environment. International Journal of Social Science and Humanity, 2 (6). pp. 573-576. ISSN 2010-3646

A. A., Jalil and S., Triwahyono and M. R., Yaakob and Z. Z. A., Azmi and N., Sapawe and N. H. N., Kamarudin and Setiabudi, H. D. and N. F., Jaafar and S. M., Sidik and S. H., Adam and B. H., Hameed (2012) Utilization of Bivalve Shell-Treated Zea mays L. (maize) Husk Leaf as a Low-Cost Biosorbent for Enhanced Adsorption of Malachite Green. Bioresource Technology, 120. pp. 218-224. ISSN 0960-8524

Ali Asghar, Jomah Adham and Razman, Mat Tahar (2012) A simulation study of a new rate-and-queue-based active queue management algorithm. Journal of Modelling in Management, 7 (3). pp. 274-286. ISSN 1746-5664

Andrew, Yau-hau Tse (2011) A Comparison of Language Learning Strategies Adopted by Secondary and University Students in Hong Kong. International Journal of Business and Social Science, 2 (11). pp. 29-34. ISSN ISSN 2219-1933 (Print), 2219-6021 (Online)

Andrew, Yau-hau Tse (2011) Which One is More Literary - A Speech or a Visitor's Guide? International Journal of Humanities and Social Science, 1 (5). pp. 237-241. ISSN 2219-1933 (print), 2219-6021 (online)

Ahmad Ziad, Sulaiman and Azilah, Ajit and R. M., Yunus and Chisti, Yusuf (2011) Ultrasound-assisted fermentation enhances bioethanol productivity. Biochemical Engineering Journal. pp. 141-150.

Andrew, Yau-hau Tse (2011) Are You Superstitious? A Survey on Chinese Attitudes towards Homophonic Word Taboo. International Journal of Arts and Sciences, 4 (17). pp. 359-370. ISSN 1944-6934 (CD ROM)

Ahmad Rasdan, Ismail and M.Z., Nuawi and N.F., Kamaruddin (2011) Comparative Study Of Whole-Body Vibration Exposure Between Train And Car Passengers: A Case Study In Malaysia. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul. pp. 490-503. ISSN 1985-9325(Print); 2180-1606 (Online)

Achmad Fauzi, Abdul Wahab and Wan Mohd Nazmi, Wan Abdul Rahman and Usama Juniansyah, Fauzi (2011) Kuantan Clay Properties and Examination of Fly Ash and Bottom Ash Utilization as Soil Stabilizer. International Journal of Civil Engineering and Geo-Environmental, 2. pp. 27-31. ISSN 2180-2742

Andrew, Yau-hau Tse (2011) Linguistic Word Taboos in Chinese Culture. British Journal of Humanities and Social Sciences, 1 (2). pp. 134-145. ISSN 2048-1268

A. R., Yusoff and Mohamed Reza Zalani, Mohamed Suffian and Mohd Yusof, Taib (2011) Literature Review of Optimization Techniques for Chatter Suppression In Machining. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 47-61. ISSN 2289-4659 (print); 2231-8380 (online)

Azlina, Ismail and Intan Suhana, Mohd Razelan and A., Zulkiple and Siti Fatimah, Che Osmi and Norhaiza, Ghazali and Aizat, Alias (2011) Microscopic Simulation & Microscopic Analytical Model Comparison in Analyzing a Signalized Intersection. International Journal of Civil Engineering and Geo-Environmental, 2. pp. 19-25. ISSN 2180-2742

Anwar, Ahmad and Rumana, Ghufran and Zularisam, A. W. (2011) Phytosequestration of Metals in Selected Plants Growing on a Contaminated Okhla Industrial Areas, Okhla, New Delhi, India. Water, Air, & Soil Pollution, 217 (1). pp. 255-266. ISSN 0049-6979(Print); 1573-2932(Online)

Abd Jalil, Borham and Asar, Abdul Karim and Kamaruzaman, Jusoff and Azwin Arif, Abdul Rahim and Mohammad Musab, Azmat Ali and Nor Yazi, Khamis and Mohammad Affendy, Omardin (2011) The Practicality of AsarFonts for Islamic and Arabic Studies. Middle-East Journal of Scientific Research, 7 (6). pp. 1056-1060. ISSN 1990-9233

Amir Izzani, Mohamed and Akagi, Takashi and Morimoto, Michiyasu and Kadowaki, Kazunori and Kitani, Isamu (2011) Simultaneous measurements of space charge and external current for LDPE films with various densities. IEEJ Transactions on Fundamentals and Materials, 131 (12). pp. 1031-1036. ISSN 0385-4205 (Print); 1347-5533 (Online)

Anandharamakrishnan, C. and Jolius, Gimbun and Stapley, Andrew G. F. and Rielly, Chris D. (2010) A Study of Particle Histories During Spray Drying using Computational Fluid Dynamic Simulations. Drying Technology, 28 (5). pp. 566-576. ISSN 0737-3937

Awang, Mohd Ghani and Vitasari, Prima and Muhammad Nubli, Abdul Wahab and Othman, Ahmad (2010) A Research for Identifying Study Anxiety Sources among University Students. International Education Studies, 3 (2). pp. 189-196. ISSN 1913-9020

Ahmed, Mokhtar Albshir Budiea and Mohd Warid, Hussin and Khairunisa, Muthusamy and Mohamed, Ismail El Gelany (2010) Performance of High Strength POFA Concrete in Acidic Environment. Concrete Research Letters, 1 (1). pp. 14-18. ISSN 2180-1371

Anandharamakrishnan, C. and Jolius, Gimbun and Stapley, Andrew G. F. and Rielly, Chris D. (2010) Application of Computational Fluid Dynamics (CFD) Simulations to Spray-Freezing Operations. Drying Technology, 28 (1). pp. 94-102. ISSN 0737-3937

A. R. M., Rosdzimin and S. M., Zuhairi and C. S. N., Azwadi (2010) Simulation Of Mixed Convective Heat Transfer Using Lattice Boltzmann Method. International Journal of Automotive and Mechanical Engineering (IJAME), 2. pp. 130-143. ISSN 1985-9325(Print); 2180-1606 (Online)

Ab Hamid, M. R. and Zainol, Mustafa and Nur Riza, Mohd Suradi and Mokhtar, Abdullah and Wan Rosmanira, Ismail and Zalina, Mohd Ali and Fazli, Idris and Siti Roslindar, Yaziz and Zulkhibri, Mustofa@Ismail (2010) Value-Based Total Performance Excellence Model: An Overview. Jurnal Teknologi (Sciences and Engineering), 52. pp. 95-104. ISSN 0127-9696 (print); 2180-3722 (online)

A. R., Yusoff and Z., Ghazalli and Hazami, Che Hussain (2009) Determining Optimum EDM Parameters in Drilling a Small Hole by Taguchi Method. International Journal of Manufacturing Technology and Management, 17 (4). pp. 345-352. ISSN 1368-2148

Abdulbari, Hayder A. and Kwaire, Asawer A. and Falih, Hussain M. (2009) Modelling of Three Phase System with Non-Newtonian Liquid Using Computational Fluid Dynamics Model. Asian Journal of Industrial Engineering, 1 (1). pp. 12-20. ISSN 1996-3386

Abdullah Adnan, Mohamed and Noor Raha, Mohd Radzuan and Hafizoah, Kassim (2009) Needs Analysis for Oral Communication at the Workplace: A Case Study of English Language Requirements for Engineers in an Automotive Company. Jurnal UMP Sains Sosial dan Pengurusan Teknologi, 1 (1). pp. 107-116. ISSN 1985-8957

Ahmad Fazullah, Ahmad Zainal Abidin and Fatimah, Omar (2009) Profil Kecenderungan Personaliti dan Kecekapan EQ sebagai Paradigma Kecemerlangan Organisasi: Satu Kajian Kes. Jurnal UMP Sains Sosial dan Pengurusan Teknologi, 1 (1). pp. 23-42. ISSN 1985-8957

Abdulbari, Hayder A. and Abd Al-Rubai, Rana Thabet (2008) Influence of Rayleigh Number in Turbulent and Laminar Region in Parallel-Plate Vertical Channels. Asian Journal of Applied Sciences, 1 (4). pp. 265-285. ISSN 1996-3343

Aziman, Abdullah and Ong, Lai Chin (2008) Mobile Student Verification System for Major Examination (S-VEC). Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 109-116. ISSN 1985-5176

A., Zulkiple and Norlela, Ismail and Mohd Sufian, Abdul Karim (2005) Social Impact Assessment of Transportation Projects by Benefit or Damage Cost Analysis. Journal of Transportation Science Society of Malaysia. pp. 101-109.

Akhtar, Muhammad Nadeem and Noorjahan Banu, Alitheen and Mohd Puad, Abdullah and Mohd Roslan, Sulaiman and Abdul Rahman, Omar and Aimi Jamil, Zulfadli and Ho, Wan Yong and Lim, Kian Lam and Yeap, Swee Keong and Nadiah, Abu Flavokawain A Induces Apoptosis in MCF-7 and MDAMB231 and Inhibits the Metastatic Process In Vitro. PLoS ONE. ISSN 1932-6203

Alkasasbeh, Hamzeh Taha and Mohd Zuki, Salleh and Razman, Mat Tahar and Roslinda, Nazar and Pop, Ioan Numerical Solution for Mixed Convection Boundary Layer Flow About a Solid Sphere in a Micropolar Fluid with Convective Boundary Conditions. World Applied Sciences Journal, 33 (9). ISSN 1818-4952

B

Bakr, Zinab H. and Wali, Qamar and Yang, Shengyuan and Yousefsadeh, M. and Padmasree, K. P. and Jamil, Ismail and Mohd Hasbi, Ab. Rahim and M. M., Yusoff and Rajan, Jose (2019) Characteristics of ZnO − SnO2 composite nanofibers as a photoanode in dye-sensitized solar cells. Industrial and Engineering Chemistry Research, 58 (2). pp. 643-653. ISSN 0888-5885 (Print); 1520-5045 (Online)

Bhalaji, R. K. A. and Bathrinath, S. and Ponnambalam, S. G. and Saravanasankar, S. (2019) A Fuzzy Decision-Making Trial and Evaluation Laboratory approach to analyse risk factors related to environmental health and safety aspects in the healthcare industry. Sadhana, 44 (55). pp. 1-15. ISSN 0256-2499 (Print); 0973-7677 (Online)

Basheer, Esmail A. M. and Abdulbari, Hayder A. (2018) Visible Light TiO2 Photocatalyst Composite Based on Carbon Microfiber Derived from Human Hair. ChemistrySelect, 3 (41). pp. 11687-11695. ISSN 2365-6549

Bariah, Yusob and Zuriani, Mustaffa and Junaida, Sulaiman (2018) Anomaly Detection in Time Series Data Using Spiking Neural Network. Advanced Science Letters, 24 (10). pp. 7572-7576. ISSN 1936-6612

Balasundram, Vekes and Ruzinah, Isha and Norazana, Ibrahim and Rafiziana, Md Kasmani and Mohd Kamaruddin, Abd Hamid and Hasrinah, Hasbullah and Khairunnisa, Kamarul Zaman (2018) Catalytic upgrading of pyrolysis vapours over metal modified HZSM-5 via in-situ pyrolysis of sugarcane bagasse: effect of nickel to cerium ratio on HZSM-5. Journal of Analytical and Applied Pyrolysis, 134. pp. 309-325. ISSN 0165-2370

Beg, M. D. H. and Islam, R. M. (2018) Thermo‐mechanical properties of glass fiber and functionalized multi‐walled carbon nanotubes filled polyester composites. Polymer Composites. pp. 1-8. ISSN 1548-0569 (In Press)

Bokolo, Anthony Jnr and Mazlina, Abdul Majid and Awanis, Romli (2018) Green IS diffusion in organizations: a model and empirical results from Malaysia. Environment, Development and Sustainability. ISSN 1387-585X (In Press)

Bokolo, Anthony Jnr and Mazlina, Abdul Majid and Awanis, Romli (2018) Heterogeneous agent-enabled decision system for evaluating Green IT performance in industrial environments. Journal of Decision Systems, 27 (1). pp. 37-62. ISSN 1246-0125

B., Norhafzan and S. N., Aqida and F., Fazliana and Mohamed Reza Zalani, Mohamed Suffian and I., Ismail and C.M., Khairil (2018) Laser melting of groove defect repair on high thermal conductivity steel (HTCS-150). Applied Physics A, 124 (2). p. 169. ISSN 0947-8396 (Print); 1432-0630 (Online)

Bahomaid, Ameen A. and Alsewari, Abdulrahman A. and Zamli, Kamal Z. and Alsariera, Yazan A. (2018) Adapting the Elitism on the Greedy Algorithm for Variable Strength Combinatorial Test Cases Generation. IET Software. pp. 1-11. ISSN 1751-8814 (In Press)

Baheta, Aklilu Tesfamichael and Oumer, A. N. and Hailegiorgis, Sintayehu M. (2018) Analysing the Thermal Performance of Heat Pipe Using Copper Nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 149-155. ISSN 2289-7879

Bamgbaded, J. A. and Kamaruddeen, A. M. and Nawi, M. N. M. and Adeleke, A. Q. and Salimon, Maruf Gbadebo and Ajibike, W. A. (2018) Analysis of some factors driving ecological sustainability in construction firms. Journal of Cleaner Production, 208. pp. 1537-1545. ISSN 0959-6526 (print), 1879-1786 (online)

Balya, Darohini and Muhammad Izzat Faez, Yusuf and M. F., Abas and N., Md. Saad and Pebrianti, Dwi and M. Z., Ibrahim (2018) Blackbox modelling of a 6 rotor helicopter. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-3). pp. 99-102. ISSN 2180-1843 (Print); 2289-8131 (Online)

Balasundram, Vekes and Khairunnisa, Kamarul Zaman and Norazana, Ibrahim and Rafiziana, Md. Kasmani and Ruzinah, Isha and Mohd. Kamaruddin, Abd. Hamid and Hasrinah, Hasbullah (2018) Catalytic upgrading of pyrolysis vapours over metal modified HZSM-5 via in-situ pyrolysis of sugarcane bagasse: effect of nickel to cerium ratio on HZSM-5. Journal of Analytical and Applied Pyrolysis, 134. pp. 309-325. ISSN 0165-2370

Balasundram, Vekes and Norazana, Ibrahim and Rafiziana, Md. Kasmani and Ruzinah, Isha and Mohd. Kamaruddin, Abd. Hamid and Hasrinah, Hasbullah and Roshafima, Rasit Ali (2018) Catalytic upgrading of sugarcane bagasse pyrolysis vapours over rare earth metal (Ce) loaded HZSM-5: Effect of catalyst to biomass ratio on the organic compounds in pyrolysis oil. Applied Energy, 220. pp. 787-799. ISSN 0306-2619

Bakr, Zinab H. and Wali, Qamar and Yang, Shengyuan and Yousefsadeh, Maryam and Padmasree, K. P. and Jamil, Ismail and Mohd Hasbi, Ab. Rahim and M. M., Yusoff and Rajan, Jose (2018) Characteristics of ZnO-SnO2 Composite Nanofibers as a Photoanode in Dye-Sensitized Solar Cells. Industrial and Engineering Chemistry Research. ISSN 0888-5885 (In Press)

Bagaber, Salem Abdullah and A. R., Yusoff (2018) Energy and Cost Integration for Multi-Objective Optimisation in a Sustainable Turning Process. Measurement. pp. 1-35. ISSN 0263-2241 (In Press)

B., Sangmesh and K., Gopalakrishna and S. H., Manjunath and N., Kathyayini and K., Kadirgama and Mahendran, Samykano and Vijayakumar, G. C. (2018) Experimental investigation on HSFP using MWCNT based nanofluids for high power light emitting diodes. Journal of Mechanical Engineering and Sciences (JMES), 12 (3). pp. 3852-3865. ISSN 2289-4659 (print); 2231-8380 (online)

Bokolo, Anthony Jnr and Mazlina, Abdul Majid and Awanis, Romli (2018) Green information technology for sustainability elicitation in government-based organisations: an exploratory case study. International Journal of Sustainable Society, 10 (1). pp. 20-41. ISSN 1756-2538

Bagaber, Salem Abdullah and A. R., Yusoff (2018) Multi-responses optimization in dry turning of a stainless steel as a key factor in minimum energy. The International Journal of Advanced Manufacturing Technology, 96 (1-4). pp. 1109-1122. ISSN 0268-3768 (Print), 1433-3015 (Online)

Bagaber, Salem Abdullah and A. R., Yusoff (2018) Sustainable optimization of dry turning of stainless steel based on energy consumption and machining cost. Procedia CIRP, 77. pp. 397-400. ISSN 2212-8271

Bakr, Zinab H. and Wali, Qamar and Jamil, Ismail and Elumalai, Naveen Kumar and Uddin, Ashraf and Rajan, Jose (2018) Synergistic combination of electronic and electrical properties of SnO2 and TiO2 in a single SnO2-TiO2 composite nanofiber for dye-sensitized solar cells. Electrochimica Acta, 263. pp. 524-532. ISSN 0013-4686

Benraghda, Abdelmadjid and Noor Raha, Mohd Radzuan and Zuraina, Ali (2018) Technical Oral Presentation Delivery: Qualitative Analysis of Engineering Undergraduates’ Impediments to Effective Oral Presentations in an Engineering Context. Library Philosophy and Practice (e-journal), 1888. pp. 1-13. ISSN 1522-0222

Bonello, P. and M. F., Hassan (2018) An experimental and theoretical analysis of a foil-air bearing rotor system. Journal of Sound and Vibration, 413. pp. 395-420. ISSN 0022-460X

Baridula, Ravinder Reddy and Ramaraju, Ramgopal Varma and C. K. M., Faizal and Abdullah, Ibrahim (2017) Effect of Groove Size on Mechanical Properties and Microstructure Due to Reinforcement Addition in Friction Stir Welded Dissimilar Alloys. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5671-5676. ISSN 1819-6608

Bawadi, Abdullah and Nur Azeanni, Abd Ghani and Vo, Dai-Viet N. (2017) Recent Advances in Dry Reforming of Methane Over Ni-Based Catalysts. Journal of Cleaner Production, 162. pp. 170-185. ISSN 0959-6526

Bakr, Zinab H. and Wali, Qamar and Azhar, Fakharuddin and Schmidt-Mende, Lukas and Brown, Thomas M. and Rajan, Jose (2017) Advances In Hole Transport Materials Engineering For Stable And Efficient Perovskite Solar Cells. Nano Energy, 34. pp. 271-305. ISSN 2211-2855

Boon, Jia Geng and Rokiah, Hashim and Othman, Sulaiman and Sugimoto, Tomoko and Sato, Masatoshi and Nurjannah, Salim and M. H. M., Amini and Sitti Fatimah, M. R. and Nor Izaida, Ibrahim (2017) Importance of Lignin on the Properties of Binderless Particleboard Made From Oil Palm Trunk. ARPN Journal of Engineering & Applied Sciences, 12 (1). pp. 33-40. ISSN 1819-6608

Benraghda, Abdelmadjid and Zuraina, Ali and Noor Raha, Mohd Radzuan (2017) Beliefs of the International University Students towards Performing English Oral Presentation in Academic Settings. “Pilot study”. English for Specific Purposes World (53). pp. 1-7. ISSN 1682-3257

Balansundram, Vekes and Norazana, Ibrahim and Rafiziana, M. Kasman and Mohd Kamarudin, Abd Hamid and Ruzinah, Isha and Hasrina, Hasbullah and Roshafima, Rasit Ali (2017) Catalytic Pyrolysis of Coconut Copra and Rice Husk for Possible Maximum Production of Bio-Oil. Chemical Engineering Transactions, 56. pp. 1177-1182. ISSN 2283-9216

Bahaaddein, K. M. Mahgoub and Suhaimi, Hasan and S. A., Sulaiman and R., Mamat and Abdul Adam, Abdullah and Hagos, F. Y. (2017) Combustion and Performance of Syngas Dual Fueling in a CI Engine with Blended Biodiesel as Pilot Fuel. BioResources, 12 (3). pp. 5617-5631. ISSN 1930-2126 (print); 1930-2126 (online)

Balansundram, Vekes and Norazana, Ibrahim and Ruzinah, Isha and Rafiziana, Md Kasmani and Mohd Kamarudin, Abd Hamid and Hasrinah, Hasbullah and Roshafima, Rasit Ali (2017) The Effect of Catalyst Loading (Ni-Ce/Al2O3) on Coconut Copra Pyrolysis via Thermogravimetric Analyzer. Chemical Engineering Transactions, 56. pp. 901-906. ISSN 2283-9216

Benjunior, B. and A. H., Ahmad and Mohd Rashidi, Maarof and Mohamed Reza Zalani, Mohamed Suffian (2017) Effect of Different Cooling Rates Condition on Thermal Profile and Microstructure of Aluminium 6061. Procedia Engineering, 184. pp. 298-305. ISSN 1877-7058

Bagaber, Salem Abdullah and Abdullahi, Tijjani and Zawati, Harun and Daib, Nateq and Mohd Hafiz Dzarfan, Othman (2017) The Effect of Lanthanum Addition on the Microstructure and Mechanical Properties of A390 Aluminium Alloy. Arabian Journal for Science and Engineering, 42 (11). pp. 4559-4564. ISSN 1319-8025 (print); 2191-4281 (online)

Bishoyi, Deepak and Sudhakar, K. (2017) Experimental Performance of a Direct Evaporative Cooler in Composite Climate of India. Energy and Buildings, 153. pp. 190-200. ISSN 0378-7788

Benraghda, Abdelmadjid and Noor Raha, Mohd Radzuan and Zuraina, Ali (2017) Impediments to Delivering Oral Presentations in English among Malaysian ESP Undergraduates. English for Specific Purposes World (53). pp. 1-13. ISSN 1682-3257

Bishoyia, Deepak and Sudhakar, K. (2017) Modeling and Performance Simulation of 100 MW PTC Based Solar Thermal Power Plant in Udaipur India. Case Studies in Thermal Engineering, 10. pp. 216-226. ISSN 2214-157X

Bagaber, Salem Abdullah and A. R., Yusoff (2017) Multi-Objective Optimization of Cutting Parameters to Minimize Power Consumption in Dry Turning of Stainless Steel 316. Journal of Cleaner Production, 157. pp. 30-46. ISSN 0959-6526 (print), 1879-1786 (online)

Bilal, Muhammad and Norhayati, Rosli and Ahmad, Iftikhar and Ullah, Safi (2017) Numerical Solution of Second Order Delay Type Differential equation by Collocation Method via First Boubeker Polynomials. Global Journal of Pure and Applied Mathematics, 13 (9). pp. 6571-6582. ISSN 0973-1768

Benraghda, Abdelmadjid and Noor Raha, Mohd Radzuan (2017) Self-Appraisal among Engineering Undergraduates in Delivering Technical Oral Presentation in a Public University of Malaysia. International Journal of English and Education, 6 (3). pp. 114-121. ISSN 2278-4012

Baitule, Akshay Suhas and Sudhakar, K. (2017) Solar Powered Green Campus: A Simulation Study. International Journal of Low-Carbon Technologies, 12 (4). pp. 400-410. ISSN 1748-1325

Basheer, Esmail A. and Abdulbari, Hayder A. (2017) Study on the Effects of Electrode and Microchannel Sizes on the Performance of MBEB. Indian Journal of Science and Technology, 10 (2). pp. 1-4. ISSN 0974-6846 (Print); 0974-5645 (Online)

Biswas, Tapan Kumar and Yuvaraj, A. R. and Sarkar, Shaheen M. and Muhammad Nor Fazli, Abd Malek and M. M., Yusoff and Arsad, Sazmal E. and Lutfor, M. R. (2017) Synthesis and Characterization of New Liquid Crystals Embedded Gold Nanoparticles for Photoswitching Properties. Nanoscience and Nanotechnology Letters, 9 (2). pp. 100-108. ISSN 1941-4900

Balasundram, Vekes and Norazana, Ibrahim and Ruzinah, Isha and Mohd Dinie Huhaimin, Samsudin and Rafiziana, Md. Kasmani and Mohd. Kamaruddin, Abd. Hamid and Hasrinah, Hasbullah (2017) Thermogravimetric studies on the catalytic Pyrolysis of rice husk. Chemical Engineering Transactions, 56. pp. 427-432. ISSN 2283-9216

Bokolo, Anthony Jnr and Mazlina, Abdul Majid (2017) An agent based green decision making model for sustainable information technology governance. Advanced Science Letters, 23 (11). pp. 11114-11118. ISSN 1936-6612

Badshah, Gran and Liew, Siau-Chuin and Jasni, Mohamad Zain and Mushtaq, Ali (2016) Watermark Compression in Medical Image Watermarking Using Lempel-Ziv-Welch (LZW) Lossless Compression Technique. Journal of Digital Imaging, 29 (2). pp. 216-225. ISSN 0897-1889

Biswas, Tapan Kumar and Sarkar, Shaheen M. and M. M., Yusoff and Lutfor, M. R. (2016) Synthesis and Characterization of Azobenzene-Based Gold Nanoparticles for Photo-Switching Properties. Journal of Molecular Liquids, 214. pp. 231-237. ISSN 0167-7322

Beg, M. D. H. and Zaman, Haydar U. (2016) Banana Fiber Strands–Reinforced Polymer Matrix Composites. Composite Interfaces, 23 (4). pp. 281-295. ISSN 0927-6440 (print); 1568-5543 (online)

Batool, Tahira and Makky, Essam A. and Ali, Muna Jalal and M. M., Yusoff (2016) A Comprehensive Review on l-Asparaginase and Its Applications. Applied Biochemistry and Biotechnology, 178 (5). pp. 900-923. ISSN 1559-0291

Bokolo, Anthony Jnr and Mazlina, Abdul Majid (2016) Development of a Green ICT Model for Sustainable Enterprise Strategy. Journal of Soft Computing and Decision Support Systems, 3 (3). pp. 1-12. ISSN 2289-8603

Beg, M. D. H. and Zaman, Haydar U. (2016) Mechanical, Thermal, And Rheological Properties of Nano-Calcium Carbonate/Polypropylene Composites Modified Bymethacrylic Acid. Journal of Thermoplastic Composite Materials. ISSN 1530-7980 (print); 0892-7057 (online)

Boland, J. W. and Howlett, P. G. and Piantadosi, J. and Roslinazairimah, Zakaria (2016) Modelling and Simulation of Volumetric Rainfall for a Catchment in the Murray-Darling Basin. ANZIAM Journal. pp. 1-24. ISSN 1445-8735 (In Press)

Beg, M. D. H. and Kormin, S. and Mohd Bijarimi, Mat Piah and Zaman, Haydar U. (2016) Preparation and Characterization of Low-density Polyethylene/Thermoplastic Starch Composites. Advances in Polymer Technology, 35 (1). p. 21521. ISSN 1098-2329

B., Norhafzan and S. N., Aqida and E., Chikarakara and D., Brabazon (2016) Surface Modification of AISI H13 Tool Steel by Laser Cladding with NiTi Powder. Applied Physics A. pp. 2-6. ISSN 0947-8396 (Print) 1432-0630 (Online)

Benraghda, Abdelmadjid and Zuraina, Ali and Noor Raha, Mohd Radzuan (2015) An Analysis of Beliefs among UMP International Students towards English Oral Presentation “Pilot Study". International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-3. ISSN 2289-697X

Benraghda, Abdelmadjid and Zuraina, Ali and Noor Raha, Mohd Radzuan (2015) Attitudes among International University Students in Delivering English Oral Presentation in Academic Settings. International Journal of English and Education, 4 (1). pp. 280-287. ISSN 2278-4012

Beg, M. D. H. and M. R., Islam and Gupta, Arun and Rivai, M. (2015) Characterization Of Ultrasound-Treated Oil Palm Empty Fruit Bunch-Glass Fiber-Recycled Polypropylene Hybrid Composites. Journal of Polymer Engineering, 35 (2). pp. 135-143. ISSN 2191-0340

Beg, M. D. H. and Alam, A. K. M. Moshiul and Mina, M. F. and Mamun, A. A. and Bledzki, A. K. (2015) Degradation And Stability Of Green Composites Fabricated From Oil Palm Empty Fruit Bunch Fiber And Polylactic Acid: Effect Of Fiber Length. Journal of Composite Materials. ISSN 0021-9983 (print); 1530-793X (online)

Bastian Wibar, Momang and N. M. Zuki, N. M. (2015) Development Concept of A Portable Quality-Confirmation Inspection Device for Automotive Body Parts. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2738-2746. ISSN 2229-8649 (Print); 2180-1606 (Online)

Billy, Anak Sup and Mohd Farid, Zainudin and Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming (2015) Effect of Rim Angle to the Flux Distribution Diameter in Solar Parabolic Dish Collector. Energy Procedia, 68. pp. 45-52. ISSN 1876-6102

Beg, M. D. H. and Shaharuddin, Kormin and Mohd Bijarimi, Mat Piah and Haydar, U. Zaman (2015) Effects of Different Starch Types on the Physico-Mechanical and Morphological Properties of Low Density Polyethylene Composites. Journal of Polymer Engineering, 35 (8). pp. 793-804. ISSN 2191-0340

Beg, M. D. H. and Shaharuddin, Kormin and Mohd Bijarimi, Mat Piah and Haydar, U. Zaman (2015) Environmentally Degradable Sago Starch Filled Low-density Polyethylene. Journal of Polymer Engineering, 35 (6). pp. 551-563. ISSN 2191-0340

Barudin, Mohd Aiman and Mohd Hairul, Ab. Rahim and Tan, Suat Hian (2015) Identification of Fragrance-Related Transcripts from Selected Orchids Using cDNA Representational Difference Analysis (cDNA-RDA) Approach. International Journal of Interdisciplinary and Multidisciplinary Studies, 2 (4). pp. 198-207. ISSN 2348 – 0343

Beg, M. D. H. and Akindoyo, John Olabode and Suriati, Ghazali and Abdullah, A. Mamun (2015) Impact Modified Oil Palm Empty Fruit Bunch Fiber/Poly(Lactic) Acid Composite. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 9 (1). pp. 165-170.

Beg, M. D. H. and Alam, A. K. M. Moshiul and R. M., Yunus and Mina, M. F. (2015) Improvement of Interaction between Pre-dispersed Multi Walled Carbon Nanotubes and Unsaturated Polyester Resin. Journal of Nanoparticle Research, 17 (1). p. 53. ISSN 1388-0764 (print), 1572-896X (online)

Beg, M. D. H. and Zaman, Haydar U. (2015) Improvement of Physico-Mechanical, Thermomechanical, Thermal and Degradation Properties of PCL/Gelatin Biocomposites: Effect of Gamma Radiation. Radiation Physics and Chemistry, 109. pp. 73-82. ISSN 0969-806X

Beg, M. D. H. and R. M., Yunus and Ridzuan, Ramli and Norhafzan, Junadi (2015) Microcrystalline Cellulose (MCC) from Oil Palm Empty Fruit Bunch (EFB) Fiber via Simultaneous Ultrasonic and Alkali Treatment. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 9 (1). pp. 8-11. ISSN 2010-3778

Batool, Tahira and Chia, Vi Vien and Makky, Essam A. and Nina Suhaity, Azmi and M. M., Yusoff (2015) Production and Optimization of L-asparaginase by E.coli ATCC10536 from Food Waste. Journal of Chemical and Pharmaceutical Research, 7 (10). pp. 394-401. ISSN 0975-7384

Butt, Saad Masood and Mazlina, Abdul Majid and Yaqoob, Lubna (2015) Review Paper on the Importance of Usability in Agile Software Development. Durreesamin Journal, 1 (2). pp. 1-5. ISSN 2204-9827

Barudin, Mohd Aiman and Mohd Hairul, Ab. Rahim and Tan, Suat Hian (2015) Sequence Analysis of New Isolated O-methyltransferase Transcript (VMPOMT) from Vanda Mimi Palmer. Scholars Academic Journal of Biosciences (SAJB), 3 (3). pp. 239-247. ISSN 2321-6883 (Online); 2347-9515 (Print)

Beg, M. D. H. and Rivai, M. and Gupta, Arun and M. R., Islam (2014) Characterization of Oil Palm Empty Fruit Bunch and Glass Fibre Reinforced Recycled Polypropylene Hybrid Composites. Fibers and Polymers, 15 (7). pp. 1523-1530. ISSN 1229-9197 (Print); 1875-0052 (Online)

Beg, M. D. H. and M. R., Islam and Saidatul Shima, Jamari (2014) Development Of Vegetable-Oil-Based Polymers. Journal of Applied Polymer Science, 131 (18). pp. 1-13. ISSN 1097-4628

Beg, M. D. H. and Zaman, Haydar U. (2014) Effect Of CaCO3 Contents On The Properties Of Polyethylene Nanocomposites Sheets. Fibers and Polymers, 15 (4). pp. 839-846. ISSN 1229-9197 (Print); 1875-0052 (Online)

Beg, M. D. H. and Zaman, Haydar U. (2014) Effect of Coir Fiber Content and Compatibilizer on the Properties of Unidirectional Coir Fiber/Polypropylene Composites. Fibers and Polymers, 15 (4). pp. 831-838. ISSN 1229-9197 (Print); 1875-0052 (Online)

Beg, M. D. H. and K. S., Ching and Y. C., Ching and C. A., Ng and N., Ishenny (2014) Effect of Polyurethane/Nanosilica Composite Coating on Water Resistance of Paper Substrate. Materials Research Innovations, 18 (S6). pp. 368-371. ISSN 1432-8917 (print); 1433-075X (online)

Beg, M. D. H. and Zaman, Haydar U. (2014) Effect of Processing Parameters on the Properties of Rigid PVC/Organoclay Nanocomposites. Journal of Polymer Materials, 31 (1). ISSN 0973-8622 (print); 0970-0838 (online)

Beg, M. D. H. and Gupta, Arun (2014) An Empirical Approach for Prediction of Natural Fiber Reinforced Polypropylene Composite Properties. Applied Mechanics and Materials, 534. pp. 69-73. ISSN 1662-7482

Billy, Anak Sup and Tanti Zanariah, Shamshir Ali and Mohd Farid, Zainudin and R. A., Bakar (2014) Experimental Study of Water Heating Efficiency between Aluminium and Copper Absorber Plate in Solar Flat Plate Collector. Applied Mechanics and Materials, 660. pp. 709-713. ISSN 1662-7482

Butt, Saad Masood and Azura, Onn and Mazlina, Abdul Majid (2014) Heurtistics Evaluation Techniques In Agile Software Model For The Development Of Usable Software. Science International (Lahore), 26 (5). pp. 2037-2040. ISSN 1013-5316

Beg, M. D. H. and Zaman, Haydar U. (2014) Influence Of Two Novel Compatibilizers On The Properties Of LDPE/Organoclay Nanocomposites. Journal of Polymer Engineering, 34 (1). pp. 75-83. ISSN 2191-0340

Badaruddin, Muhammad and Zuwairie, Ibrahim and Kamarul Hawari, Ghazali and Mohd Riduwan, Ghazali and Kian, Sheng Lim and Sophan Wahyudi, Nawawi and Nor Azlina, Ab. Aziz and Marizan, Mubin and Norrima, Mokhtar (2014) Performance Evaluation of Vector Evaluated Gravitational Search Algorithms Based on ZDT Test Functions. International Journal of Simulation: Systems, Science & Technology (IJSSST), 15 (1). pp. 1-6. ISSN 1473-8031 (print); 1473-804x (online)

Badhrulhisham, Abdul Aziz and Azizan, Ramli and Mazlin, Mokhtar (2014) Revisiting the Concept of Development, Disaster and Safety Management: The Quranic Perspective. International Journal of Disaster Risk Reduction, 9. pp. 26-37. ISSN 2212-4209

Bachtiar, Dandi and Siregar, J. P. and Ahmad Shahrizan, Sulaiman and M. R. M., Rejab (2014) Tensile Properties of Hybrid Sugar Palm/Kenaf Fibre Reinforced Polypropylene Composites. Applied Mechanics and Materials, 695. pp. 155-158. ISSN 1662-7482

Beg, M. D. H. and A. K. M., Moshiul Alam and M. F., Mina and A. A., Mamun and A. K., Bledzki and Q. T. H., Shubhra (2014) Thermo-Mechanical and Morphological Properties of Short Natural Fiber Reinforced Poly (Lactic Acid) Biocomposite: Effect of Fiber Treatment. Fibers and Polymers, 15 (6). pp. 1303-1309. ISSN 1229-9197 (Print); 1875-0052 (Online)

Beg, M. D. H. and M. R., Islam (2013) Characterization of Laccase-Treated Kenaf Fibre Reinforced Recycled Polypropylene Composites. BioResources, 8 (3). pp. 3753-3770. ISSN 1930-2126 (print); 1930-2126 (online)

Bhuiyan, Md. Khairul Hassan and Rahman, Md. Mahbubur and Mina, Md. Forhad and M. R., Islam and Gafur, Md. Abdul and Begum, Afia (2013) Crystalline Morphology and Properties of Multi-walled Carbon Nanotube Filled Isotactic Polypropylene Nanocomposites: Influence of Filler Size and Loading. Composites Part A: Applied Science and Manufacturing, 52. pp. 70-79. ISSN 1359-835X

Beg, Abul Hashem and Noraziah, Ahmad and Abdalla, Ahmed N. and Rabbi, Khandakar Fazley (2013) Framework of Persistence Layer Synchronous Replication to Improve Data Availability into a Heterogeneous System. International Journal of Computer Theory and Engineering, 5 (4). pp. 611-615. ISSN 1793-8201

Bashar, S. Mohammed and Cheng, Hock Tian (2013) Immediate Deflection of Pretensioned Inverted T-Beam with Circular Web Openings Strengthened with GFRP Using Response Surface Methodology. Key Engineering Materials, 594/95. pp. 516-520. ISSN 1013-9826 (print); 1662-9795 (online)

B.B, Sahari and M.M, Shahzamanian and M, Bayat and Z.N, Ismarrubie and F, Mustapha (2012) Comparison of Thermoelastic Results in Two Types of Functionally Graded Brake Discs. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 660-669. ISSN 2229-8648 (Print); 2180-1606 (Online)

B., Ghobadian and P., Nematizade and G., Najafi (2012) Investigation of Fossil Fuel and Liquid Biofuel Blend Properties Using Artificial Neural Network. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 639-647. ISSN 2229-8648 (Print); 2180-1606 (Online)

Belavendram, N. (2010) Application Of Genetic Algorithms For Robust Parameter Optimization. International Journal of Automotive and Mechanical Engineering (IJAME), 2. pp. 211-220. ISSN 1985-9325(Print); ISSN: 2180-1606 (Online)

C

Charles, Ashwin and Cheng, C. K. (2019) Photocatalytic treatment of palm oil mill effluent by visible light-active calcium ferrite: effects of catalyst preparation technique. Journal of Environmental Management, 234. pp. 404-411. ISSN 0301-4797

Che Nur Mazadillina, Zahari and Marina, Mohd Sham and Sakina, Shahabudin and Mohd Hairul, Ab. Rahim and Nina Suhaity, Azmi (2019) A rapid quantitative dye-binding method of screening glycosaminoglycans presence in medicinal plants. Asian Journal of Pharmaceutical and Clinical Research, 12 (1). pp. 396-402. ISSN 0974-2441(print); 2455-3891(online)

Chak, Wen Zheng and Abu, Mohd Yazid (2019) Application of Activity Based Costing for Palm Oil Plantation. Journal of Modern Manufacturing Systems and Technology, 2 (1). pp. 1-14. ISSN 2636-9575

Charles, Ashwin and Khan, Maksudur R. and Ng, Kim Hoong and Wu, Ta Yeong and Lim, Jun Wei and Wongsakulphasatch, Suwimol and Witoon, Thongthai and Cheng, C. K. (2019) Facile synthesis of CaFe2O4 for visible light driven treatment of polluting palm oil mill effluent: Photokinetic and scavenging study. Science of The Total Environment, 661. pp. 522-530. ISSN 0048-9697

Cheng, Yoke Wang and Khan, Maksudur R. and Ng, Kim Hoong and Wongsakulphasatch, Suwimol and Cheng, C. K. (2019) Harnessing renewable hydrogen-rich syngas from valorization of palm oil mill effluent (POME) using steam reforming technique. Renewable Energy, 138. pp. 1114-1126. ISSN 0960-1481

Chuan, Zun Liang and Azlyna, Senawi and Wan Nur Syahidah, Wan Yusoff and Noriszura, Ismail and Tan, Lit Ken and Mu, Wen Chuan (2018) Identifying the Ideal Number Q-Components of the Bayesian Principal Component Analysis Model for Missing Daily Precipitation Data Treatment. International Journal of Engineering & Technology, 7 (4.30). pp. 5-10. ISSN 2227-524X

Chuan, Zun Liang and Noriszura, Ismail and Wan Nur Syahidah, Wan Yusoff and Soo-Fen, Fam and Mohd Akramin, Mohd Romlay (2018) Identifying homogeneous rainfall catchments for non-stationary time series using TOPSIS algorithm and bootstrap K-sample Anderson-Darling test. International Journal of Engineering & Technology, 7 (4). pp. 3228-3237. ISSN 2227-524X

Chandran, Suntharaamurthi and Kohbalan, Moorthy and Mohd Arfian, Ismail and Mohd Zamri, Osman and Mohd Azwan Mohamad, Hamza and Ernawan, Ferda (2018) An Improved Integrative Random Forest for Gene Regulatory Network Inference of Breast Cancer. Advanced Science Letters, 24 (10). pp. 7566-7571. ISSN 1936-6612

Chan, Hwee Geem and Amir Izzani, Mohamed (2018) Investigation on the occurrence of positive cloud to ground (+CG) lightning in UMP Pekan. Journal of Atmospheric and Solar-Terrestrial Physics, 179. pp. 206-213. ISSN 1364-6826

Chowdhury, Zaira Zaman and Krishnan, Bagavathi and Sagadevan, Suresh and Rafique, Rahman Faizur and Nor Aliya, Hamizi and Yasmin, Abdul Wahab and Khan, Ali Akbar and Rafie, Johan and Al-douri, Y. and Kazi, Salim Newaz and Shah, Syed Tawab (2018) Effect of temperature on the physical, electro-chemical and adsorption properties of carbon micro-spheres using hydrothermal carbonization process. Nanomaterials, 8 (8). pp. 1-19. ISSN 2079-4991

Ching, L.H. and Mahmood, Syed and Raihana Z., Edros and Rajaletchumy, Veloo Kutty (2018) Development and characterization of a theranostic micelles system using TPGS with docetaxel and coumarin-6: a dual polymeric nanocarrier system. International Journal of Engineering Technology and Sciences, 5 (1). pp. 1-10. ISSN 2289-697X (Print); ISSN: 2462-1269 (Online)

Cheng, C. K. and Osazuwa, Osarieme U. and Liew, Rock Keey and Chong, Min Yee and Nam, Wai Lun and Phang, Xue Yee and Su, Man Huan and Chong, Cheng Tung and Lam, Su Shiung (2018) Production of activated carbon as catalyst support by microwave pyrolysis of palm kernel shell: a comparative study of chemical versus physical activation. Research on Chemical Intermediates, 44 (6). pp. 3849-3865. ISSN 0922-6168 (Print); 1568-5675 (Online)

Chin, S. Y. and Hong, Chi Shein and M. R., Kamaruzaman and Chua, Gek Kee (2018) Chromatography strategies for the composition determination of bio-based sorbitol azelaic acid ester. Polymer Testing, 65. pp. 270-280. ISSN 0142-9418

Chung, Pui Ping and Tengku Azam Shah, Tengku Mohamad and Akhtar, Muhammad Nadeem and Enoch Kumar, Perimal and Ahmad, Akira and Daud Ahmad, Israf Ali and Mohd Roslan, Sulaiman (2018) Antinociceptive Effects of Cardamonin in Mice: Possible Involvement of TRPV1, Glutamate, and Opioid Receptors. Molecules, 23 (9). pp. 1-14. ISSN 1420-3049 (print); 1420-3049 (online)

C. W., Mohd Noor and M. M., Noor and R., Mamat (2018) Biodiesel as alternative fuel for marine diesel engine applications: A review. Renewable & Sustainable Energy Reviews, 94. pp. 127-142. ISSN 1364-0321

C. W., Mohd Noor and R., Mamat and Ahmed, Ali Najah (2018) Comparative study of artificial neural network and mathematical model on marine diesel engine performance prediction. International Journal of Innovative Computing, Information and Control, 14 (3). pp. 959-969. ISSN 1349-4198

C. W., Mohd Noor and R., Mamat and M. M., Noor and Samo, K. B. and W. B., Wan Nik (2018) Effects of low proportion palm fatty acids methyl ester blends on the performance and combustion of marine diesel engine. Journal of Biobased Materials and Bioenergy, 12 (2). pp. 153-160. ISSN 1556-6560

Chong, Wei Jian and M. Z., Ibrahim and Thum, Wei Seong and Ting, Ei Wei and Sabira, Khatun (2018) Embedded character recognition system using random forest algorithm for IC inspection system. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-3). pp. 121-125. ISSN 2289-8131

Chi, Cheng Chong and Nornasuha, Abdullah and Syahida Nasuha, Bukhari and Nurul Aini, Razali and Lee, Peng Teh and Herma Dina, Setiabudi (2018) Hydrogen production via CO2 reforming of CH4 over low-cost Ni/SBA-15 from silica-rich palm oil fuel ash (POFA) waste. International Journal of Hydrogen Energy. ISSN 0360-3199 (In Press)

Cheng, Yoke Wang and Lee, Zhan Sheng and Chong, Chi Cheng and Khan, Maksudur R. and Cheng, C. K. and Ng, Kim Hoong and Hossain, Sk Safdar (2018) Hydrogen-rich syngas production via steam reforming of palm oil mill effluent (POME) - A thermodynamics analysis. International Journal of Hydrogen Energy. pp. 1-14. ISSN 0360-3199 (In Press)

Chala, G. T. and Abd Rashid, Abd Aziz and Hagos, F. Y. (2018) Natural Gas Engine Technologies: Challenges and Energy Sustainability Issue. Energies, 11 (11). pp. 1-44. ISSN 1996-1073

Chan, Yi Shee and Chan, Mieow kee and Ngien, S. K. and Chew, Sho Yin and Teng, Yong Kang (2018) Performance of PEG on Immobilization of Zero Valent Metallic Particles on PVDF Membrane for Nitrate Removal. Membrane Water Treatment, 9 (1). pp. 1-7. ISSN 2005-8624 (Print), 2092-7037 (Online)

Chakkaravarthy, Naveen and Subathra, M. S. P. and Pradeep, P. Jerin and Manoj Kumar, Nallapaneni (2018) Solar irradiance forecasting and energy optimization for achieving nearly net zero energy building. Journal of Renewable and Sustainable Energy, 10 (3). ISSN 1941-7012

Choon, Sen Seah and Shahreen, Kasim and Mohd Farhan, Md Fudzee and Jeffrey Mark, Law Tze Ping and Mohd Saberi, Mohamad and Saedudin, Rd Rohmat and Mohd Arfian, Ismail (2017) An Enhanced Topologically Significant Directed Random Walk in Cancer Classification using Gene Expression Datasets. Saudi Journal of Biological Sciences, 24 (8). pp. 1828-1841. ISSN 1319-562X

Cheng, Yoke Wang and Chang, Ying Shi and Ng, Kim Hoong and Wu, Ta Yeong and Cheng, C. K. (2017) Photocatalytic Restoration of Liquid Effluent from Oil Palm Agroindustry in Malaysia using Tungsten Oxides Catalyst. Journal of Cleaner Production, 162. pp. 205-219. ISSN 0959-6526 (print), 1879-1786 (online)

Chowdhury, M. A. and Debnath, U. K. and Nuruzzaman, D. M. and Islam, M. (2017) Erosion of Mild Steel for Engineering Design and Applications. Journal of Bio- and Tribo-Corrosion, 3 (3). pp. 1-17. ISSN 2198-4220(print); 2198-4239(online)

Chahal, Sugandha and Jahir Hussain, Fathima Shahitha and M. M., Yusoff and Mohammad Syaiful Bahari, Abdull Rasad and Anuj, Kumar (2017) Nanohydroxyapatite-coated Hydroxyethyl Cellulose/poly (vinyl) Alcohol Electrospun Scaffolds and Their Cellular Response. International Journal of Polymeric Materials and Polymeric Biomaterials, 66 (3). pp. 115-122. ISSN 0091-4037(Print); 1563-535X(Online)

Chee, W. K. and Lim, H. N. and Z., Zainal and Harrison, I. and Huang, N. M. and Andou, Y. and Chong, Kwok Feng and Pandikumar, A. (2017) Electrospun Nanofiber Membranes as Ultrathin Flexible Supercapacitors. RSC Advances, 7 (20). pp. 12033-12040. ISSN 2046-2069

Chala, G. T. and A. R. A., Aziz and Hagos, F. Y. (2017) Combined Effect of Boost Pressure and Injection Timing on the Performance and Combustion of CNG in a DI Spark Ignition Engine. International Journal of Automotive Technology, 18 (1). pp. 85-96. ISSN 1229-9138

Chowdhury, M. A. and Debnath, U. K. and Mia, M. S. and Nuruzzaman, D. M. (2017) Experimental and characterisation of eroded surfaces of T-glass fibre embedded in polyester matrix. International Journal of Materials Engineering Innovation, 8 (3-4). pp. 159-172. ISSN 1757-2754

Chan, Shi Jing and Pebrianti, Dwi and M. F., Abas and Bayuaji, Luhur (2017) Fault Tolerance For Two Wheel Mobile Robot Using FSM (Finite State Machine). International Journal of Software Engineering & Computer Sciences (IJSECS), 3. pp. 106-119. ISSN 2289-8522

Conie, Toh and Mohd Hairul, Ab. Rahim and Nooraini, Mohd. Ain and Namasivayam, Parameswari and Rusea, Go and Nur Ashikin, Psyquay Abdullah and Meilina Ong, Abdullah and Janna Ong, Abdullah (2017) Floral micromorphology and transcriptome analyses of a fragrant Vandaceous Orchid, Vanda Mimi Palmer, for its fragrance production sites. BMC Research Notes, 10 (554). pp. 1-10. ISSN 1756-0500

Chua, Gek Kee and Nur Anis, Mohamad Ariff (2017) Lipopolysaccharide Induces The Production Of Diagnostic Monoclonal Antibody By Hybridoma Cells Against Congenital Adrenal Hyperplasia. Journal of Engineering Science and Technology, 12 (11). pp. 2939-2951. ISSN 1823-4690

Chong, Soo Ling and Soh, Jiah Chee and Cheng, C. K. (2017) Production of Ethylene From Ethanol Dehydration Over H3PO4-Modified Cerium Oxide Catalysts = Penghasilan Etilena Daripada Pendehidratan Etanol Dengan Mangkin Serium Oksida Terubahsuai H3PO4. Malaysian Journal of Analytical Sciences, 21 (4). pp. 839-848. ISSN 1394-2506

Chowdhury, Mohammad Asaduzzaman and Debnath, Uttam Kumar and Nuruzzaman, D. M. and Islam, Md. Monirul (2017) Study of Erosive Surface Characterization of Copper Alloys under Different Test Conditions. Surfaces and Interfaces, 9. pp. 245-259. ISSN 2468-0230

Chiam, H. W. and Azmi, W. H. and Usri, N. A. and R., Mamat and N. M., Adam (2017) Thermal Conductivity and Viscosity Of Al2o3 Nanofluids for Different Based Ratio of Water and Ethylene Glycol Mixture. Experimental Thermal and Fluid Science, 81. pp. 420-429. ISSN 0894-1777

Chuan, Yi Foo and Hong, Ngee Lim and Mohd Adzir, Mahdi and K. F., Chong and Nay, Ming Huan (2016) High-Performance Supercapacitor Based on Three-Dimensional Hierarchical rGO/Nickel Cobaltite Nanostructures as Electrode Materials. Journal of Physical Chemistry C, 120 (38). pp. 21202-21210. ISSN 1932-7447 (print); 1932-7455 (online)

Chin, Siew Choo and Shafiq, Nasir and Nuruddin, Muhd Fadhil (2016) Behaviour of RC Beams with CFRP-Strengthened Openings. Structural Concrete, 17 (1). pp. 32-43. ISSN 1751-7648

Chin, S. Y. and Anwaruddin, Hisyam and Haniif, Prasetiawan (2016) Modeling and Simulation Study of an Industrial Radial Moving Bed Reactor for Propane Dehydrogenation Process. International Journal of Chemical Reactor Engineering, 14 (1). pp. 33-44. ISSN 2194-5748

Chin, S. Y. and Anwaruddin, Hisyam and Haniif, Prasetiawan (2016) Modeling and Simulation Study of an Industrial Radial Moving Bed Reactor for Propane Dehydrogenation Process. International Journal of Chemical Reactor Engineering, 14 (1). pp. 33-44. ISSN 2194-5748 (Print); 1542-6580 (Online)

Cai, Huayang and Savenije, H. H. G. and Gisen, J. I. A. (2016) A Coupled Analytical Model for Salt Intrusion and Tides in Convergent Estuaries. Hydrological Sciences Journal, 61 (2). pp. 402-419. ISSN 2150-3435

Chua, Gek Kee (2016) Development of a Low Serum Medium for the Production of Monoclonal Antibody Against Congenital Adrenal Hyperplasia by Hybridoma Culture. Preparative Biochemistry and Biotechnology, 46 (7). pp. 679-685. ISSN 1082-6068

Chin, Siew Choo and Doh, Shu Ing and Kusbiantoro, Andri and Yih, Kang Wong and Saffuan, Wan Ahmad (2016) Characterization of Sewage Sludge Ash (SSA) in Cement Mortar. Journal of Engineering and Applied Sciences, 11 (4). pp. 2242-2247. ISSN 1819-6608

Chowdhury, M. N. K. and Ahmad Fauzi, Ismail and Beg, M. D. H. and Khan, Maksudur R. and Gohari, Rasoul Jamshidi and Muhammad Abdul Razis, Saidin and M. R., Islam and Ong, Huei Ruey (2016) Control of Biodegradability in a Natural Fibre based Nanocomposite as a Function of Impregnated Copper Nanoparticle. RSC Advances, 6 (34). pp. 28937-28946. ISSN 2046-2069

Chowdhury, Mohammad Asaduzzaman and Debnath, Uttam K. and Nuruzzaman, D. M. and Islam, Md. Monirul (2016) Experimental Analysis of Aluminum Alloy under Solid Particle Erosion Process. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 230 (12). pp. 1516-1541. ISSN 2041-305X

Chahal, Sugandha and Jahir Hussain, Fathima Shahitha and Kumar, Anuj and Mohammad Syaiful Bahari, Abdull Rasad and M. M., Yusoff (2016) Fabrication, Characterization and In Vitro Biocompatibility of Electrospun Hydroxyethyl Cellulose/poly (vinyl) Alcohol Nanofibrous Composite Biomaterial for Bone Tissue Engineering. Chemical Engineering Science, 144. pp. 17-29. ISSN 0009-2509

Che Nur Mazadillina, Zahari and Nina Suhaity, Azmi (2016) Halal source of medication; glycosaminoglycan based medicinal plantc. International Journal of Applied Chemistry, 12 (4). pp. 803-810. ISSN 0973-1792

Chan, Weng Howe and Mohd Saberi , Mohamad and Safaai , Deris and Corchado, Juan Manuel and Omatu, Sigeru and Zuwairie, Ibrahim and Shahreen, Kasim (2016) An Improved gSVM-SCADL2 with Firefly Algorithm for Identification of Informative Genes and Pathways. International Journal of Bioinformatics Research and Applications, 12 (1).

C. Zafirah, Rosly and Ummu Kulthum, Jamaludin and Nurul Suraya, Azahari (2016) Parametric Study on Efficiency of Archimedes Screw Turbine. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10904-10908. ISSN 1819-6608

Cheng, C. K. and Han, Jie Chan (2016) Potential of Empty Fruit Bunch Clinker as a Support for Nickel and Cobalt Catalysts in Methane Dry Reforming: Waste to Wealth Approach. Journal of the Taiwan Institute of Chemical Engineers, 62. pp. 76-83. ISSN 1876-1070

C. W., Mohd Noor and R., Mamat and G., Najafi and Mohd Hafizil, Mat Yasin and C. K., Ihsan and M. M., Noor (2016) Prediction of Marine Diesel Engine Performance by Using Artificial Neural Network Model. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1917-1930. ISSN 2289-4659 (print); 2231-8380 (online)

Cheng, C. K. and Mohd Rizauddin, Deraman and Ng, Kim Hoong and Khan, Maksudur R. (2016) Preparation of Titania Doped Argentum Photocatalyst and its Photoactivity Towards Palm Oil Mill Effluent Degradation. Journal of Cleaner Production, 112 (Prt. 1). pp. 1128-1135. ISSN 0959-6526 (print), 1879-1786 (online)

C. Santhana, Krishnan and Mimi Sakinah, A. M. and Singh, Lakhveer and Zularisam, A. W. (2016) Production of Biodiesel using Tannery Fleshing as a Feedstock via Solid-state Fermentation. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 10 (5). pp. 532-537. ISSN 1307-6892

Chia, Vi Vien and Batool, Tahira and Makky, Essam A. and Nina Suhaity, Azmi and M. M., Yusoff (2016) Production of L-asparaginase from Natural Substrates by Escherichia coli ATCC 10536 and Comparison of Physiology Parameters. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9680-9684. ISSN 1819-6608

Chin, S. Y. and M. R., Kamaruzaman and M. A. A., Ahmad (2016) Synthesis and Characterization of Dealuminated Ultra-Stable Zeolite Y Supported Cesium Salt of Phosphotungstic Acid for the Esterification of Acrylic Acid with Butanol. Chemical Engineering Communications, 203 (11). pp. 1515-1521. ISSN 0098-6445 (print); 1563-5201 (online)

C. W., Mohd Noor and R., Mamat and Wan Mohd, Norsani and M. M., Noor (2016) An investigation of using palm biodiesel blend on the performance of a stationary marine diesel engine. Defence S&T Technical Bulletin, 9 (2). pp. 86-97. ISSN 1985-6571

Chua, Gek Kee and Nur Anis, Saarani (2015) Screening and Optimising Metal Salt Concentration for Harvesting Nannochloropsis Sp. by Flocculation. Journal of Engineering and Technology, 6 (2). pp. 109-120. ISSN 2180-3811 (print); 2289-814X (online)

Cacciapuoti, Angela Sara and Caleffi, Marcello and Paura, Luigi and Rahman, Md. Arafatur (2015) Channel Availability for Mobile Cognitive Radio Networks. Journal of Network and Computer Applications, 47. pp. 131-136. ISSN 1084-8045

Chi, Shein Hong and Chin, S. Y. and Cheng, C. K. and Mohd Sabri, Mahmud and Chua, Gek Kee (2015) Enzymatic Conversion of Glycerol to Glyceric Acid with Immobilised Laccase in Na-Alginate Matrix. Procedia Chemistry, 16. pp. 632-639. ISSN 1876-6196

Cheng, C. K. and Mohd Rizauddin, Deraman and Khan, Maksudur R. (2015) Evaluation of the Photocatalytic Degradation of Pre-Treated Palm Oil Mill Effluent (POME) Over Pt-Loaded Titania. Journal of Environmental Chemical Engineering. pp. 1-10. ISSN 2213-3437

Chen, Chee Lek and Sunarti, Abd Rahman (2015) Formulation of Mixed-Matrix Membrane (PSF/Zeolite) for CO2/N2 Separation: Screening of Polymer Concentration. Journal of Materials Science and Chemical Engineering, 3 (5). pp. 1-10. ISSN 2327-6045 (print); 2327-6053 (online)

Chin, S. Y. and M. A. A., Ahmad and M. R., Kamaruzaman and Cheng, C. K. (2015) Kinetic Studies of the Esterification of Pure and Dilute Acrylic Acid with 2-ethyl Hexanol Catalysed by Amberlyst 15. Chemical Engineering Science, 129. p. 116. ISSN 0009-2509

Chee, Wai Woon and Huei, Ruey Ong and K. F., Chong and Khan, Maksudur R. (2015) MnO2/CNT as ORR Electrocatalyst in Air-Cathode Microbial Fuel Cells. Procedia Chemistry, 16. pp. 640-647. ISSN 1876-6196

Chan, Fong Shiew and Nurul, Shamsinar and Nurul Izwanie, Rasli and Syed Mohd Saufi, Tuan Chik (2015) Multiple Interactions Mixed Matrix Membrane Chromatography Using Anion and Cation Exchanger Resin for Whey Protein Fractionation. Jurnal Teknologi (Sciences and Engineering), 75 (1). pp. 259-263. ISSN 0127-9696 (print); 2180-3722 (online)

C. L., Hoo and Sallehuddin, Mohamed Haris and Edwin, C.Y. Chung and Nik Abdullah, Nik Mohamed (2015) New Integral Antiwindup Scheme for PI Motor Speed Control. Asian Journal of Control, 17 (6). pp. 2115-2132. ISSN 1934-6093

Choo, Wei Chun and Nina Farhana, Mohd Jamaludin and N., Zainol (2015) Optimization Of Biogas Production From Poultry Manure Wastewater In 250 Ml Flasks. Jurnal Teknologi (Sciences and Engineering), 75 (1). pp. 275-285. ISSN 0127-9696 (print); 2180-3722 (online)

Cheng, C. K. and Kong, Zi Ying and Khan, Maksudur R. (2015) Photocatalytic-Fenton Degradation of Glycerol Solution over Visible Light-Responsive CuFe2O4. Water, Air and Soil Pollution, 226 (327). pp. 1-12. ISSN 0049-6979 (print); 1573-2932 (online)

Chowdhury, M. N. K. and Ahmad Fauzi, Ismail and Khan, Maksudur R. and Beg, M. D. H. and Mohd Hafiz Dzarfan, Othman and Gohari, Rasoul Jamshidi and Moslehyani, Ali (2015) Physicochemical and Micromechanical Investigation of a Nanocopper Impregnated Fibre Reinforced Nanocomposite. RSC Advances, 5 (122). pp. 100943-100955. ISSN 2046-2069

Chowdhury, M. N. K. and Ahmad Fauzi, Ismail and Beg, M. D. H. and Hegde, Gurumurthy and Gohari, Rasoul Jamshidi (2015) Polyvinyl Alcohol/polysaccharide Hydrogel Graft Materials for Arsenic and Heavy Metal Removal. New Journal of Chemistry, 39 (7). pp. 5823-5832. ISSN 1144-0546

Chin, S. Y. and Haniif, Prasetiawan and Anwaruddin, Hisyam and Abdullah, Azahari and Ikmal Hisham, Maharon (2015) Sensitivity Study of the Propane Dehydrogenation Process in an Industrial Radial Moving Bed Reactor. Journal of Engineering Science and Technology, 2 (1). pp. 62-74. ISSN 1823-4690

Chee, Wai Woon and Jia, Han Lim and Huei, Ruey Ong and Khan, Maksudur R. (2015) Simultaneous Power Generation and Wastewater Treatment by Using Air-Cathode Single Chamber Microbial Fuel Cell. International Journal of Material Science Innovations (IJMSI), 3 (1). pp. 33-41. ISSN 2289-4063

Choon, Lih Hoo and Sallehuddin, Mohamed Haris and Edwin Chin, Yau Chung and Nik Abdullah, Nik Mohamed (2015) Steady-State Integral Proportional Integral Controller for PI Motor Speed Controllers. Journal of Power Electronics, 15 (1). pp. 177-189. ISSN 1598-2092

Che Mohammad Nizam, Che Kamaruddin and Ahmad Rasdan, Ismail and Ong, Pit Wah and Ahmad Fauzi, Awang and Rosnizawati, Bharom (2015) The effects muscle activities at constant illuminance with multiple temperatures for rubber scrap industries. International Journal of Current Research and Academic Review (Special-2). pp. 49-55. ISSN 2347-3215

Chin, S. Y. and Mohd Amirul Asyraf, Ahmad and Muhammad Ridzuan, Kamaruzaman (2014) New Method For Acrylic Acid Recovery From Industrial Waste Water Via Esterification With 2-Ethyl Hexanol. Process Safety And Environmental Protection, 92 (6). pp. 522-531. ISSN 0957-5820

C. K. M., Faizal and Norhazimah, Abdul Halim (2014) Bioconversion of Oil Palm Trunks Sap to Bioethanol by Different Strains and Co-Cultures at Different Temperatures. Journal of Medical and Bioengineering, 3 (4). pp. 297-300. ISSN 2301-3796

C., Sridhathan and Fahmi, Samsuri (2014) ECG and EEG Monitoring using Power Line Communication. ACEEE International Journal on Communication, 5 (1). pp. 50-59. ISSN 2158-7558

C. K. M., Faizal and Norhazimah, Abdul Halim (2014) Kinetic Parameters for Bioethanol Production from Oil Palm Trunk Juice. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 8 (4). pp. 328-330. ISSN 2010-3778

Cheng, C. K. and Kim, Hoong Ng and Mohd Rizauddin, Deraman and Chun, How Ang and Soo, Kee Chong and Kong, Zi Ying and Khan, Maksudur R. (2014) Phototreatment of Palm Oil Mill Effluent (POME) over Cu/TiO2 Photocatalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 9 (2). pp. 121-127. ISSN 1978-2993

Cheng, C. K. and Kah, Weng Siew and Hua, Chyn Lee and Jolius, Gimbun (2014) Production of CO-rich Hydrogen Gas from Glycerol Dry Reforming Over La-promoted Ni/Al2O3 Catalyst. International Journal of Hydrogen Energy, 39 (13). pp. 6927-6936. ISSN 0360-3199

Chong, Fui Chin and He, Yu Hai and Syed Mohd Saufi, Tuan Chik (2014) Purification of Papain from Unclarified Papaya Juice using Reversed Phase Expanded Bed Adsorption Chromatography (RP-EBAC). Journal of Industrial and Engineering Chemistry, 20 (6). pp. 4293-4297. ISSN 1226-086X

Chong, Ah Kow and Yong, Ying Mei (2014) Validating the Effectiveness of the Mandarin Pronunciation Guide among Malay Learners. International Journal of Language Education and Applied Linguistics (IJLEAL), 1. pp. 9-17. ISSN 2289-7208 (print); 2289-9294 (online)

Chowdhury, M. N. K. and Beg, M. D. H. and Khan, Maksudur R. (2013) Biodegradability of Nanoparticle Modified Fiber Reinforced Polyester Resin Nanocomposite. Procedia Engineering, 68. pp. 431-438. ISSN 1877-7058

Chowdhury, M. N. K. and M. F., Fina and Khan, Maksudur R. and Beg, M. D. H. (2013) Cu Nanoparticles for Improving the Mechanical Performances of Oil Palm Empty Fruit Bunch Fibers as Analyzed by Weibull Model. Polymer Bulletin, 70 (11). pp. 3103-3113. ISSN 0170-0839(Print); 1436-2449(Online)

Chin, Siew Choo and Shafiq, Nasir and Nuruddin, Muhd Fadhil (2013) Effects of Large Openings in the Shear Zone of Reinforced Concrete Beams. Malaysian Construction Research Journal, 13 (2). ISSN 1985-3807

Chowdhury, M. A. and Nuruzzaman, D. M. and Kumar Roy, Biplov and M. M., Rahman and Md. Shahin, Mia and Md. Rashed, Mia and Shazib, Bhumik (2013) Experimental Investigation of Friction Coefficient and Wear Rate of Different Sliding Pairs. World Applied Sciences Journal, 28 (5). pp. 608-619. ISSN 1818-4952

Chowdhury, M. A. and Nuruzzaman, D. M. and Roy, Biplov Kumar (2013) Experimental Investigation of Friction Coefficient and Wear Rate of Stainless Steel 304 Sliding against Smooth and Rough Mild Steel Counterfaces. Gazi University Journal of Science, 26 (4). pp. 597-609.

Chowdhury, Mohammad Asaduzzaman and Nuruzzaman, D. M. and Roy, Biplov Kumar and Rahman, Muhammad Mahmudur and Azad, Md. Abul Kalam and Rahman, Md.Mijanur and Bhumik, Shazib (2013) Friction Coefficient and Wear Rate of Copper Mating with Smooth and Rough Stainless Steel 304 Counterfaces. Journal of American Science, 9 (5). pp. 361-368. ISSN 1545-1003 (Print); 2375-7264 (Online)

Chowdhury, M. N. K. and Beg, M. D. H. and Khan, Maksudur R. and M. F., Fina (2013) Modification of Oil Palm Empty Fruit Bunch Fibers by Nanoparticle Impregnation and Alkali Treatment. Cellulose, 20 (3). pp. 1477-1490. ISSN 0969-0239

Chua, Gek Kee and Abdul-Rahman, Badarulhisam and Chisti, Yusuf (2013) Production and Scale-Up of a Monoclonal Antibody Against 17-Hydroxyprogesterone. Biotechnology Progress, 29 (1). pp. 154-164. ISSN 1520-6033

Cheong Lee, Ho and Tutut, Herawan and Noraziah, Ahmad (2012) Evolutionary Grammars Based Design Framework For Product Innovation. Procedia Technology, 1. pp. 132-136. ISSN 2212-0173

Cheng, C. K. and Lim, Rwi Hau and Anabil, Ubil and Chin, S. Y. and Jolius, Gimbun (2012) Hydrogen as Carbon Gasifying Agent During Glycerol Steam Reforming over Bimetallic Co-Ni Catalyst. Advances in Materials Physics and Chemistry, 2 (4). pp. 165-168. ISSN 2162-531X (print); 2162-5328 (online)

C. K. M., Faizal and Shareena, Mohd Sharif (2012) Influence of Factorial Design Analysis on the Performance of Bisphenol A Molecular Imprinted Polymer. International Journal of Chemical and Environmental Engineering, 3 (2). pp. 147-151. ISSN 2078-0737

Chew, Few Ne and Tan, Siang Wen and Boo, Chern Huey and Tey, Ti Beng (2012) Statistical Optimization of Green Fluorescent Protein Production from Escherichia coli BL21(DE3). Preparative Biochemistry and Biotechnology, 42 (6). pp. 535-550. ISSN 1082-6068

Chowdhury, M. N. K. and M. W., Khan and M. F., Fina and Beg, M. D. H. and Khan, Maksudur R. and A. K. M., Moshiul Alam (2012) Synthesis and Characterization of Radiation Grafted Films for Removal of Arsenic and Some Heavy Metals from Contaminated Water. Radiation Physics and Chemistry, 81 (10). pp. 1606-1611. ISSN 0969-806X

Chowdhury, M. N. K. and Beg, M. D. H. and Khan, Maksudur R. and Mina, M. F. (2012) Synthesis of Copper Nanoparticles and Their Antimicrobial Performances in Natural Fibres. Materials Letters, 98. pp. 26-29. ISSN 0167-577X

Cheng, Hock Tian (2011) Engineering Properties of Epoxy Polymer Cement Concrete Reinforced with Glass Fibers. Journal of Engineering and Applied Sciences, 6 (3). pp. 191-199. ISSN 1816-949X

Chin, S. Y. and Radzi, S. N. R. and Maharon, I. H. and Shafawi, M. A. (2011) Kinetic Model and Simulation Analysis for Propane Dehydrogenation in an Industrial Moving Bed Reactor. World Academy of Science, Engineering and Technology, 76 (34). pp. 183-189. ISSN 2010-3778

Chin, Siew Choo and Shafiq, Nasir and Nuruddin, Muhd Fadhil FRP as strengthening material for Reinforced Concrete beams with openings - A review. KSCE Journal of Civil Engineering. (In Press)

Chin, Siew Choo and Shafiq, Nasir and Kusbiantoro, Andri and Nuruddin, Muhd Fadhil Reinforced Concrete Deep Beams with Openings Strengthened Using FRP - A Review. Advanced Materials Research. (In Press)

D

Dharamdass, Surya and Fernando, Yudi (2018) Contact Centre Service Excellence: A Proposed Conceptual Framework. International Journal of Services and Operations Management, 29 (1). pp. 18-41. ISSN 1744-2389

Doolun, Ian Shivraj and Ponnambalam, S. G. and Subramanian, Nachiappan and Kanagaraj, G. (2018) Data driven hybrid evolutionary analytical approach for multi objective location allocation decisions: Automotive green supply chain empirical evidence. Computers and Operations Research, 98. pp. 265-283. ISSN 0305-0548

Dwibedi, Swagat and Jain, Neelesh Kumar and Pathak, Sunil (2018) Investigations on joining of stainless steel tailored blanks by μ-PTA process. Materials and Manufacturing Processes, 33 (16). pp. 1851-1863. ISSN 1042-6914 (print), 1532-2475 (online)

Dondariya, Chandrakant and Porwal, Deepak and Awasthi, Anshul and Shukla, Akash Kumar and Sudhakar, K. and S. R., Murali Manohar and Bhimte, Amit (2018) Performance simulation of grid-connected rooftop solar PV system for small households: A case study of Ujjain, India. Energy Reports, 4. pp. 546-553. ISSN 2352-4847

Darbar, Devendrasinh and Anilkumar, M. R. and Rajagopalan, Vijayaraghavan and Bhattacharya, Indranil and Elim, Hendry Izaac and Ramakrishnappa, T. and Ezema, F. I. and Rajan, Jose and Reddy, M. V. (2018) Studies on spinel cobaltites, MCo2O4 (M = Mn, Zn, Fe, Ni and Co) and their functional properties. Ceramics International, 44 (5). pp. 4630-4639. ISSN 0272-8842

Diyana, Kamarudin and Yasmin, Hussain and Applegate, Brooks and Mohd Hanafi, Mohd Yasin (2018) An ethnographic qualitative study on the Malaysian preschool and special needs’ children home and school reading habits. International Journal of Pedagogy and Teachers Education, 2 (1). pp. 224-234. ISSN 2549-8525

Dhanushkodi, S. and Wilson, Vincent H. and Sudhakar, K. (2017) Mathematical modeling of drying behavior of cashew in a solar biomass hybrid dryer. Resource-Efficient Technologies, 3 (4). pp. 359-364. ISSN 2405-6537

Deb, Anjan and Ferdous, Jannatul and Ferdous, Kaniz and Uddin, M. Rakib and Khan, Maksudur R. and Rahman, Md. Wasikur (2017) Prospect of Castor Oil Biodiesel in Bangladesh: Process Development and Optimization Study. International Journal of Green Energy, 14 (12). pp. 1063-1072. ISSN 1543-5075(print); 1543-5083(online)

D., Ramasamy and K., Kadirgama and M. M., Noor (2017) Experiments on Dissimilar Valve Lift (DVL) for Turbulence Increment on a Bi-Fuel Compressed Natural Gas (CNG) Engine. Defect and Diffusion Forum, 370. pp. 19-28. ISSN 1662-9507

Daneshfozoun, S. and Redza, Reedzwan and Vo, Dai-Viet N. and Ramli, Nasser Mohamed and Abdullah, M. Azmuddin and Abdullah, Bawadi (2017) Adsorption Kinetics of Pb(II) Ions from Aqueous Solution using Modified Magnetic Nano-Composite of OPEFB. Indian Journal of Science and Technology, 10 (11). pp. 1-5. ISSN (Print) : 0974-6846 ; (Online) : 0974-5645

Damhuji, Rifai and Abdalla, Ahmed N. and Ramdan, Razali and Kharudin, Ali and Faraj, Moneer A. (2017) An Eddy Current Testing Platform System for Pipe Defect Inspection Based on an Optimized Eddy Current Technique Probe Design. Sensors, 17 (3). pp. 1-24. ISSN 1424-8220

D., Ramasamy and C.Y., Goh and K., Kadirgama and F., Benedict and M. M., Noor and G., Najafi and A., P.Carlucci (2017) Engine Performance, Exhaust Emission And Combustion Analysis Of A 4-Stroke Spark Ignited Engine Using Dual Fuel Injection. Fuel, 207. pp. 719-728. ISSN 0016-2361

Debnath, U. K. and Chowdhury, M. A. and Nuruzzaman, D. M. (2017) The Experimental Characteristics and Evaluation of Nylon-12 in Erosion Process. Journal of Testing and Evaluation, 45 (3). pp. 773-787. ISSN 0090-3973

D., Ramasamy and Mohanesan, K and K., Kadirgama and M. M., Noor and M. M., Rahman (2017) Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (3). pp. 4496-4507. ISSN 1985-9325(Print); 2180-1606 (Online)

D., Devandran and A. N., Oumer and N. T., Rao and F., Basrawi and Hassan, Ibrahim (2017) Investigation on Effect of Some Operating Conditions on Flow and Heat Transfer of Supercritical Co2 In Helical Coiled Tubes Via Multilevel Factorial Methodology. Malaysian Journal of Industrial Technology, 2 (2). pp. 23-30. ISSN 2462-2540

Deshmukh, Vaibhav N. and Radhakrishnan, S. and Kulkarni, R. R. (2017) Investigations on Thermal Conductivity, Heat Transfer Coefficient and Viscosity of Graphite Nanoparticle Dispersed Nanofluid. Journal of Nanofluids, 6 (6). pp. 1008-1016. ISSN 2169-432X (Print); 2169-4338 (Online)

Deepak, Bishoyi and Sudhakar, K. (2017) Modeling and Performance Simulation of 100 MW LFR Based Solar Thermal Power Plant in Udaipur India. Case Studies in Thermal Engineering, 10. pp. 216-226. ISSN 2214-157X

Das, Debashish and Sadiq, Ali Safa and Noraziah, Ahmad and Lloret, Jaime (2017) Stock Market Prediction with Big Data Through Hybridization of Data Mining and Optimized Neural Network Techniques. Journal of Multiple-Valued Logic and Soft Computing, 29 (1-2). pp. 157-181. ISSN 1542-3980(print); 1542-3999(online)

Debbarmaa, Mary and Sudhakar, K. and Baredar, Prashant (2017) Thermal Modeling, Exergy Analysis, Performance of BIPV and BIPVT: A Review. Renewable and Sustainable Energy Reviews, 73. pp. 1276-1288. ISSN 1364-0321

Debnath, U. K. and Chowdhury, M. A. and Nuruzzaman, D. M. (2016) Study of Erosion Performance and Characterization of Ebonite Reinforced With Carbon Fibers. Materials Performance and Characterization, 5 (1). pp. 312-329. ISSN 2165-3992

Daryabor, Farshid and See, Hai Ooi and Azizan, Abu Samah and Akbari, Abolghasem (2016) Tides and Their Dynamics over the Sunda Shelf of the Southern South China Sea. PLoS ONE, 11 (9). pp. 1-24. ISSN 1932-6203

Divyashree, A. and Shoriya Aruni, Abdul Manaf and Yallappa, S. and Kathyayini, N. and Hegde, Gurumurthy (2016) Low Cost, High Performance Supercapacitor Electrode Using Coconut Wastes: Eco-Friendly Approach. Journal of Energy Chemistry, 25 (5). pp. 880-887. ISSN 2095-4956

Daryabor, Farshid and See, Hai Ooi and Azizan, Abu Samah and Akbari, Abolghasem (2016) Dynamics of the Water Circulations in the Southern South China Sea and Its Seasonal Transports. PLoS ONE, 11 (7). pp. 1-20. ISSN 1932-6203

Das, Debashish and Sadiq, Ali Safa and Noraziah, Ahmad (2016) An Efficient Time Series Analysis for Pharmaceutical Sector Stock Prediction by Applying Hybridization of Data Mining and Neural Network Technique. Indian Journal of Science and Technology, 9 (21). pp. 1-7. ISSN 0974-6846

Damhuji, Rifai and Abdalla, Ahmed N. and Kharudin, Ali (2016) Defect Signal Analysis For Nondestructive Testing Assesment. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2160-2167. ISSN 1819-6608

Damhuji, Rifai and Abdalla, Ahmed N. and Kharuldin, Ali and Ramdan, Razali (2016) Giant Magnetoresistance Sensors: A Review on Structures and Non-Destructive Eddy Current Testing Applications. Sensors, 16 (3). pp. 298-328. ISSN 1424-8220

Das, Sreejon and Yousuf, Abu and Khan, Maksudur R. and Iqbal, Salma Akhter and Md. Nasir, Uddin (2016) Assessment of Organic Acid-Rich Bio-Sap to Generate Electricity. International Journal of Sustainable Energy. pp. 1-11. ISSN 1478-6451 (print); 1478-646X (online)

D., Ramasamy and Z. A., Zainal and K., Kadirgama and Briggs, Horizon Walker-Gitano (2016) Effect of Dissimilar Valve Lift on a bi-fuel CNG Engine Operation. Energy, 112. 509 - 519. ISSN 0360-5442 (Print), 1873-6785 (Online)

Dzulqarnain, Abu Bakar and Norazura, Ismail (2016) The Integral Approach to Safety. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 19-24. ISSN 2289-697X

Damirchi, Hojjatollah and G., Najafi and Alizadehnia, Siamak and R., Mamat and Che Sidik, Nor Azwadi and Azmi, W. H. and M. M., Noor (2016) Micro Combined Heat and Power to Provide Heat and Electrical Power using Biomass and Gamma-type Stirling Engine. Applied Thermal Engineering, 103. pp. 1460-1469. ISSN 1359-4311

Damhuji, Rifai and Abdalla, Ahmed N. and Noraznafulsima, Khamsah and Mohd, Aizat and Mohd, Fadzli (2016) Subsurface Defects Evaluation using Eddy Current Testing. Indian Journal of Science and Technology, 9 (9). pp. 1-7. ISSN 0974-6846 (Print); 0974-5645 (Online)

Doh, Shu Ing and Chin, Siew Choo and Tan, Kim Guan and Suil, Adilen (2016) The Use of Sewage Sludge Ash (SSA) as Partial Replacement of Cement in Concrete. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3371-3375. ISSN 1819-6608

D., Ramasamy and K., Kadirgama and M. M., Rahman and Z. A., Zainal (2015) Analysis of Compressed Natural Gas Burn Rate and Flame Propagation on a Sub-Compact Vehicle Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2405-2416. ISSN 1985-9325(Print); 2180-1606 (Online)

Dzulqarnain, Abu Bakar and Norazura, Ismail (2015) Integral Safety Needs Analysis towards Optimizing Safety Performance in Malaysian-Based Multinational Pipe Coating Industry. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 69-80. ISSN 2289-697X

D., Ramasamy and K., Kadirgama and R. A., Bakar and Z. A., Zainal (2014) Mass Fraction Burn Comparison of Compressed Natural Gas and Gasoline. Applied Mechanics and Materials, 660. pp. 442-446. ISSN 1662-7482

Das, Sanjeev and Barekar, NS and Fakir, Omer El and Wang, Liliang and A. K., Prasada Rao and Patel, JB and Kotadia, HR and Bhagurkar, A and Dear, John P and Fan, Z (2014) Effect of melt conditioning on heat treatment and mechanical properties of AZ31 alloy strips produced by twin roll casting. Materials Science and Engineering: A, 620. pp. 223-232. ISSN 0921-5093

Dewayanto, Nugroho and Ruzinah, Isha and Mohd Ridzuan, Nordin (2014) Kinetic Study on the Catalytic Pyrolysis of Decanter Cake from Palm Oil Milling Plant by using Thermogravimetry Data. Jurnal Teknologi, 69 (5). pp. 65-69. ISSN 2180-3722

Dodangeh, Javad and Sorooshian, Shahryar and Afshari, Ali Reza (2014) Linguistic Extension for Group Multicriteria Project Manager Selection. Journal of Applied Mathematics, 2014. pp. 1-8. ISSN 1110-757X (print); 1687-0042 (online)

D. J., Nieves and N. S., Azmi and R., Xu and R., Levy and E. A., Yates and D. G., Fernig (2014) Monovalent Maleimide Functionalization of Gold Nanoparticles Via Copper-Free Click Chemistry. Communication, 50. pp. 13157-13160.

D., Ramasamy and Goh, Chin Yuan and R. A., Bakar and Z. A., Zainal (2014) Validation of Road Load Characteristic of a Sub-Compact Vehicle by Engine Operation. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1820-1831. ISSN 2229-8649 (Print); 2180-1606 (Online)

Djojodihardjo, H. and M. F., Abdul Hamid and Abdul Aziz, Jaafar and Shah Nor, Basri and F. I., Romli and F., Mustapha and A. S., Mohd Rafie and D. L. A., Abdul Majid (2013) Computational Study on the Aerodynamic Performance of Wind Turbine Airfoil Fitted with Coanda Jet. Journal of Renewable Energy, 2013. pp. 1-17.

D., Ramasamy and Khoo, Aik Soon and Z. A., Zainal and Briggs, Horizon Walker-Gitano (2012) Variation of Air Flow Pattern Through Dissimilar Valve Lift In A Spark Ignition Engine. Journal of the Chinese Institute of Engineers, 36 (8). pp. 1-14. ISSN 0253–3839 (print); 2158–7299 (online)

Damayanti, A. and Mohamed, Z. and Salim, M.R, and G., Olsson and Ahmad Ziad, Sulaiman (2009) Respirometric analysis of activated sludge models from palm oil mill effluent. Bioresource Technology. pp. 144-149.

D., Ramasamy and K., Kadirgama and M. M., Noor Computational Analysis Of Dissimilar Valve Lift (DVL) Swirl On A Bi-Fuel Compressed Natural Gas (CNG) Engine. 9th International Conference on Advanced Computational Engineering and Experimenting.

E

Elzein, Nahla Mohammed and Mazlina, Abdul Majid and Fakherldin, Mohammed and Hashem, Ibrahim Abaker Targio (2018) Distributed Join Query Processing for Big RDF Data. Advanced Science Letters, 24 (10). p. 96. ISSN 1936-6612

Ernawan, Ferda and Zuriani, Mustaffa and Liew, Siau-Chuin and Kohbalan, Moorthy (2018) A blind multiple watermarks based on human visual characteristics. International Journal of Electrical and Computer Engineering (IJECE), 8 (4). pp. 2578-2587. ISSN 2088-8708

Ernawan, Ferda and M. Nomani, Kabir (2018) A block-based RDWT-SVD image watermarking method using human visual system characteristics. The Visual Computer. pp. 1-19. ISSN 0178-2789 (In Press)

Ezrin Hani, Sukadarin and Junaidah, Zakaria and Qian, F. S and Nur Syazwani, Mohd Nawi and Baba, M. Deros (2018) Creating a culture of prevention in occupational safety and health practice: perceived body discomfort in two sitting positions. Malaysian Journal of Public Health Medicine, 18 (SI(2)). pp. 47-51. ISSN 1675-0306

Ernawan, Ferda and Kabir, M. Nomani (2018) A Robust Image Watermarking Technique With an Optimal DCT-Psychovisual Threshold. IEEE Access, 6. pp. 20464-20480. ISSN 2169-3536

Erny Haslina, Abd Latib and M. S., Najib and Che Mohd Aizal, Che Mohd and Saiful Nizam, Tajuddin (2018) Analysis of different quality agarwood oil (aquilaria malaccensis) and sensory study. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-3). pp. 57-61. ISSN 2180-1843 (Print); 2289-8131 (Online)

E., Shaffie and A. K., Arshad and A., Alisibramulis and J., Ahmad and W., Hashim and Z., Abd Rahman and Putra Jaya, Ramadhansyah (2018) Effect of Mixing Variables on Physical Properties of Modified Bitumen Using Natural Rubber Latex. International Journal of Civil Engineering and Technology (IJCIET), 9 (7). pp. 1812-1821. ISSN 0976-6316

Ezrinda, Mohd Zahidee and Kamarul Hawari, Ghazali and Ren, Jinchang and Mohd Zuki, Salleh (2018) A Hybrid Thermal-Visible Fusion for Outdoor Human Detection. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-4). pp. 79-83. ISSN 2289-8131

Elsaman, R. and Ali, Gomaa A. M. and Uosif, M. A. M. and Shaaban, K. H. S. and Saddeek, Y. B. and Aly, K. A. and K. F., Chong (2018) Natural radioactivity of some Egyptian materials used in glasses manufacturing and glass ceramics. International Journal of Radiation Research, 16 (2). pp. 207-215. ISSN 2345-4229

Elhag, Husam Eldin Elhag Abugabr and Nailaa, Aishath and Nour, A. H. and Azilah, Ajit and Ahmad Ziad, Sulaiman and Badhrulhisham, Abdul Aziz (2018) Optimization of protein yields by ultrasound assisted extraction from Eurycoma longifolia roots and effect of agitation speed. Journal of King Saud University - Science. pp. 1-10. ISSN 1018-3647 (In Press)

Edriyana, Abd Aziz and Syazwan N., Moni and Marlinda, Abdul Malek and Nadiah, Mokhtar and Amirul A., Borhan (2018) Prediction of blue water footprint accounting for water treatment plants in Kuantan river basin. International Journal of Engineering & Technology, 7 (4). pp. 286-293. ISSN 2227-524X

Edwan Hafif, Jalil and Sunarti, Abd Rahman and Norazwina, Zainol and Azilah, Ajit and Chin, Sim Yee (2018) Sulfide removal from petrochemical wastewater using catalytic wet air oxidation (CWAO) method. Materials Today: Proceedings, 5 (10 Part 2). pp. 22043-22049. ISSN 2214-7853

Ezihaslinda, Ngah and Wan Jumani, Fauzi and Noor Raha, Mohd Radzuan and Noor Azlinda, Zainal Abidin and Amy Zulaikha, Mohd Ali and Fathiah Izzati, Mohamad Fadzillah and Hazlina, Abdullah (2018) Topic Management in Collaborative Oral Group Discussion of English as a Second Language Learners. Advanced Science Letters, 24 (1). pp. 193-195. ISSN 1936-6612

Eiwei, Ting and M. Z., Ibrahim (2018) A review of finger vein recognition system. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-9). pp. 167-171. ISSN 2289-8131

Esfahani, Hamid and Ramakrishna, Seeram and Rajan, Jose (2017) Electrospun Ceramic Nanofiber Mats Today: Synthesis, Properties, and Applications. Materials, 10 (11). pp. 1-43. ISSN 1996-1944

Ernawan, Ferda and M. Nomani, Kabir and Kamal Z., Zamli (2017) An Efficient Image Compression Technique using Tchebichef Bit Allocation. Optik - International Journal for Light and Electron Optics, 148. pp. 106-119. ISSN 0030-4026

Ernawan, Ferda and Ramalingam, Mritha and Sadiq, Ali Safa and Zuriani, Mustaffa (2017) An Improved Imperceptibility and Robustness of 4x4 DCT-SVD Image Watermarking Using Modified Entropy. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (2-7). pp. 111-116. ISSN 2180-1843

Ernawan, Ferda and M. Nomani, Kabir and Jasni, Mohamad Zain (2017) Bit Allocation Strategy Based on Psychovisual Threshold in Image Compression. Multimedia Tools and Applications. pp. 1-24. ISSN 1380-7501(print); 1573-7721(online)

Edham, Amirul and Saifful Kamaluddin, Muzakir and Jamil, Ismail and M. M., Yusoff and Rajan, Jose (2017) A Heat Capacity Model of T 3/2 Dependence for Quantum Dots. Physical Chemistry Chemical Physics, 19. pp. 408-418. ISSN 1463-9076 (print), 1463-9084 (online)

Engku Haliza, Engku Ibrahim and Azimah, Ahmad Zaki (2017) Analysing and Synthesising Morphemes: The Case of Malay Pre-University ESL Students. Advanced Science Letters, 23 (5). pp. 4964-4967. ISSN 1936-6612

Ezrin Hani, Sukadarin and Junaidah, Zakaria (2017) Musculoskeletal Disorder among Municipal Solid Waste Collectors. Asia Pacific Environmental and Occupational Health Journal , 3 (1). pp. 28-32. ISSN 2462 -2214

Engku Nadia, Engku Mat Nasir and Fatinah, Ab Rahman and Syarifah, Abd Rahim and Raihana Z., Edros and Nornizar, Anuar (2017) Preliminary Study on Operating Parameters toward the Metastable Zone-Width of Carbamazepine Co-Crystal. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

Ezrin Hani, Sukadarin and Junaidah, Zakaria (2017) Preliminary study of musculoskeletal complaints and ergonomic risk factors among catering workers. Asia Pacific Environmental and Occupational Health Journal , 3 (1). pp. 39-43. ISSN 2462 -2214

Elfira, Anuar and Syed Mohd Saufi, Tuan Chik and Mazrul Nizam, Abu Seman and Hafizuddin, Wan Yussof and Ahmad Fauzi, Ismail (2017) Thin Film Composite Hollow Fiber Membrane for Separation in Biorefinery. Chemical Engineering Transactions, 56. pp. 1099-1104. ISSN 2283-9216

Ezzaty Faridah Nor, Mohd Hussin and Ping, Jack Soh and Mohd Faizal, Jamlos and Herwansyah, Lago and Azremi, Abdullah Al-Hadi and Mohd Hafiz Fazalul, Rahiman (2017) A Wideband Textile Antenna with a Ring-slotted AMC Plane. Applied Physics A, 123 (46). pp. 1-7. ISSN 0947-8396 (Print) 1432-0630 (Online)

Ernawan, Ferda and Ramalingam, Mritha and Sadiq, Ali Safa and Zuriani, Mustaffa (2017) An improved imperceptibility and robustness of 4×4 DCT-SVD image watermarking using modified entropy. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (2-7). pp. 111-116. ISSN 2180-1843

Edriyana, Abd Aziz and Abdul Syukor, Abd Razak and Suryati, Sulaiman and Hasmanie, Abdul Halim and Islam, Mir Sujaul and N. A., Zainodin and W. A., Wan Omar (2016) The Performance of Coconut Husk and Shell for the Removal of Methyl Red from Aqueous Solution: Adsorption Equilibrium and Kinetic Study. Journal of Engineering and Applied Sciences, 11 (11). pp. 2500-2507. ISSN 1816-949X

Ernawan, Ferda and Zuriani, Mustaffa and Bayuaji, Luhur (2016) An Efficient Image Compression Using Bit Allocation based on Psychovisual Threshold. Information (Japan), 19 (9B). pp. 4177-4182. ISSN 1343-4500

E. J., Mohamad and Ruzairi, Abdul Rahim and Mohd Hafiz, Fazalul Rahiman and H. L. M., Ameran and Yasmin, Abdul Wahab and O. M. F., Marwah (2016) Analysis of Crude Palm Oil Composition in a Chemical Process Conveyor using Electrical Capacitance Tomography. Flow Measurement and Instrumentation, 50. pp. 57-64. ISSN 0955-5986

Ezrin Hani, Sukadarin and Baba, Md Deros and Nur Syazwani, Mohd Nawi and Jaharah, A. Ghani and Ahmad Rasdan, Ismail and Junaidah, Zakaria (2016) Back Pain and the Observed Factors among Oil Palm Workers. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 70-78. ISSN 2289-697X

Engku Norfatima, Engku Dahalan and Azizul Helmi, Sofian and Arman, Abdullah and Norhazilan, Md Noor and Abdul Halim Hadi, Che Mohammad Yahya (2016) Effect of Organic Zinc Coating Layers on Steel Corrosion Behaviour. Australian Journal of Basic and Applied Sciences, 10 (17 (Special)). pp. 40-47. ISSN 1991-8178

Ellie Yi, Lih Teo and Lingeswarran, Muniandy and Eng, Poh Ng and Farook, Adam and Abdul Rahman, Mohamed and Rajan, Jose and K. F., Chong (2016) High Surface Area Activated Carbon from Rice Husk as a High Performance Supercapacitor Electrode. Electrochimica Acta, 192. pp. 110-119. ISSN 0013-4686

Ezrin Hani, Sukadarin and Baba, M. Deros and Nur Syazwani, Mohd Nawi and Jaharah, A. Ghani and Ahmad Rasdan, Ismail and Junaidah, Zakaria (2016) A Preliminary Study of Postural Problems among Oil Palm Workers: Is OWAS Method Suitable to Investigate Those Problems? International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 79-90. ISSN 2289-697X

Ezrin Hani, Sukadarin and Norhidayah, Abdull and Junaidah, Zakaria and Abdullah, Ibrahim (2016) Psychosocial issue among office workers: a case study at a Public Higher Education Institution in Malaysia. The Social Sciences, 11 (18). pp. 4534-4538. ISSN 1818-5800 (Print); 1993-6125 (Online)

Ervina Efzan, Ervina Efzan and Nur Faziera, Mhd Nasir and Siti Rabiatull Aisha, Idris (2016) A Review: Lead Free Solder and Its Wettability Properties. Soldering & Surface Mount Technology, 28 (3). pp. 125-132. ISSN 0954-0911

Ernawan, Ferda (2016) Robust Image Watermarking based on Psychovisual Threshold. Journal of ICT Research and Applications, 10 (3). pp. 228-242. ISSN 23375787

Edriyana, Abd Aziz and W. A., Wan Omar and Aznilnda, Zainodin and Islam, Mir Sujaul (2016) The Role of Organic Carbon in Natural and Synthetic Oestrogens Sorption onto Soils. International Journal of Environmental Science and Development, 7 (7). pp. 520-524. ISSN 2010-0264

Ezrin Hani, Sukadarin and Baba, M. Deros and Jaharah, A. Ghani and Ahmad Rasdan, Ismail and Nursyazwani, Mohd Nawi and Norhidayah, Abdull (2016) Validity Test For Simple Ergonomics Risk Assessment (SERA) Method. Malaysian Journal of Public Health Medicine, 1 (Suppl.). pp. 134-143. ISSN 1675-0306

Ekhlas, Mhawi and Hamdan, Daniyal and Mohd Herwan, Sulaiman (2015) Advanced Techniques in Harmonic Suppression via Active Power Filter: A Review. International Journal of Power Electronics and Drive System (IJPEDS), 6 (2). pp. 185-195. ISSN 2088-8694 (print); 2088-8694 (online)

Ellie Yi, Lih Teo and Hong, Ngee Lim and Rajan, Jose and K. F., Chong (2015) Aminopyrene Functionalized Reduced Graphene Oxide as a Supercapacitor Electrode. RSC Advances, 5 (48). pp. 38111-38116. ISSN 2046-2069

E., Baranitharan and Khan, Maksudur R. and D. M. R., Prasad and Wee, Fei Aaron Teo and Geok, Yuan Annie Tan and Rajan, Jose (2015) Effect of Biofilm Formation on the Performance of Microbial Fuel Cell for the Treatment of Palm Oil Mill Effluent. Bioprocess and Biosystems Engineering, 38 (1). pp. 15-24. ISSN 1615-7591 (print); 1615-7605 (online)

Emyra Ezzaty, Masiren and Noorlisa, Harun and W. H. W., Ibrahim and Fatmawati, Adam (2015) Effect of Temperature on Diffusivity of Monoethanolamine (MEA) on Absorption Process for CO2 Capture. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 43-51. ISSN 2289-697X

E. A., Aziz and W. A., Wan Omar and N. A., Zainordin (2015) The Environmental Fate of Natural and Synthetic Oestrogens; Comparison between Prediction Tools and Experimental Values. International Journal of Environmental Science and Development, 6 (7). pp. 526-529. ISSN 2010-0264

Elhussein, Salah Ahmed and Mabubu, Juma Ibrahim and Osman, Nour Ahmed and Hua, Hongxia (2015) Evaluation of Antimalarial Activity of Sesquiterpene Lactones of Wild Sudanese Basil (Ocimum basilicum L.) through their in vitro Inhibition of Dihydrofolate Reductase (DHFR). Journal of Biology, Agriculture and Healthcare, 5 (1). pp. 21-27. ISSN 2224-3208 (print); 2225-093X (online)

Emyra Ezzaty, Masiren and Noorlisa, Harun and W. H. W., Ibrahim and Fatmawati, Adam (2014) The Effect of Temperature on Intermolecular Interaction of Monoethanolamine Absorption Process for CO2 Removal. International Journal of Chemical and Environmental Engineering, 5 (5). pp. 297-300. ISSN 2078-0737

Elham, Falatoonitoosi and Shamsuddin, Ahmed and Sorooshian, Shahryar (2014) A Multi-Criteria Framework to Evaluate Supplier's Greenness. Abstract and Applied Analysis . pp. 1-12.

Ezarul Faradianna, Lokman and Gu, Harvest F. and Wan Nazaimoon, Wan Mohamud and M. M., Yusoff and Keh, Leong Chia and Östenson, Claes-Göran (2014) The Possible Mechanisms by which Borapetol B Stimulates Insulin Release from Rat Islets. International Journal of Medicine and Medical Science, 47 (1). pp. 1461-1467. ISSN 2051-5731

Edris, Khalid Edris and Fakhreldin, Mohammed Adam Ibrahim and Jasni, Mohamad Zain and Tuty Asmawaty, Abdul Kadir (2014) Steg Analysis Algorithm for Edge Adaptive Least Significant Bit Matching Revisited Detection. Australian Journal of Basic and Applied Sciences, 8 (18). pp. 617-628. ISSN 1991-8178 (In Press)

E., Baranitharan and Khan, Maksudur R. and D. M. R., Prasad and Jailani, Salihon (2013) Bioelectricity Generation from Palm Oil Mill Effluent in Microbial Fuel Cell Using Polacrylonitrile Carbon Felt as Electrode. Water, Air and Soil Pollution , 224 (1533). pp. 1-11. ISSN 0049-6979 (print); 1573-2932 (online)

Elumalai, Naveen Kumar and Tan, Mein Jin and Vijila, Chellappan and Rajan, Jose and Suresh Kumar, Palaniswam and Sundaramurthy, Jayaraman and Hemant, Kumar Raut and Seeram, Ramakrishna (2013) Electrospun ZnO Nanowire Plantations in the Electron Transport Layer for High-Efficiency Inverted Organic Solar Cells. Applied Materials & Interfaces, 5 (19). pp. 9396-9404.

Elumalai, Naveen Kumar and Rajan, Jose and Archana, Panikar Sathyaseelan and Chellappan, Vijila and Ramakrishna, Seeram (2012) Charge Transport through Electrospun SnO2 Nanoflowers and Nanofibers: Role of Surface Trap Density on Electron Transport Dynamics. The Journal of Physical Chemistry C. pp. 22112-22120.

Ebrahim, Nader Ale and Shamsuddin, Ahmed and Salwa Hanim, Abdul-Rashid and Zahari, Taha (2012) Effective Virtual Teams for New Product Development. Scientific Research and Essay , 7 (21). pp. 1971-1985. ISSN 1992-2248

Esfahani, J.A. and Karbasian, H.R. (2012) Optimizing the Shape of Rotor Blades for Maximum Power Extraction in Marine Current Turbines. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 722-729. ISSN 2229-8649 (Print); 2180-1606 (Online)

F

Farah Hanani, Zulkifli and Jahir Hussain, Fathima Shahitha and W. S., Wan Harun and M. M., Yusoff (2019) Highly porous of hydroxyethyl cellulose biocomposite scaffolds for tissue engineering. International Journal of Biological Macromolecules, 122. pp. 562-571. ISSN 0141-8130

Fahim, Fayaz and Long, Giang Bach and Mahadi, B. Bahari and Trinh, Duy Nguyen and Khanh, B. Vu and Ramesh, Kanthasamy and Chanatip, Samart and Chinh, Nguyen‐Huy and Dai‐Viet, N. Vo (2019) Stability evaluation of ethanol dry reforming on Lanthania‐doped cobalt‐based catalysts for hydrogen‐rich syngas generation. International Journal of Energy Research, 43 (1). pp. 405-416. ISSN 0363-907X (print); 1099-114X (online)

Farkhana, Muchtar and Abdullah, Abdul Hanan and Hassan, Suhaidi and Khader, Ahamad Tajudin and Kamal Z., Zamli (2019) Energy conservation of content routing through wireless broadcast control in NDN based MANET: A review. Journal of Network and Computer Applications, 131. pp. 109-132. ISSN 1084-8045

Fernando, Yudi and Muhamad Fairuz, Ahmad Jasmi and Muhammad Shabir, Shaharudin (2019) Maritime green supply chain management: its light and shadow on the bottom line dimensions of sustainable business performance. International Journal of Shipping and Transport Logistics, 11 (1). pp. 60-93. ISSN 1756-6525

Fernando, Yudi and Jabbour, Charbel Jose Chiappetta and Wah, Wen Xin (2019) Pursuing green growth in technology firms through the connections between environmental innovation and sustainable business performance: Does service capability matter? Resources, Conservation and Recycling, 141. pp. 8-20. ISSN 0921-3449

Fernando, Yudi and Chat, Chukai (2019) Value Co-Creation, Goods and Service Tax (GST) Impacts on Sustainable Logistic Performance. Research in Transportation Business & Management. pp. 1-11. ISSN 2210-5395 (In Press)

Fakhrud, Din and Kamal Z., Zamli (2018) Hyper-heuristic based strategy for pairwise test case generation. Advanced Science Letters, 24 (10). pp. 7333-7338. ISSN 1936-6612

Fatin Athirah, Azalan and Muhamad Idaham, Umar Ong (2018) Proposal of CPU-Free Environment Using PC in Your Pocket Technology. Advanced Science Letters, 24 (10). pp. 7850-7854. ISSN 1936-6612

Firdaus Shazriq, Mohd Fadzil and Nur Izzati Khoirunnisa, Ismail and Nurrina, Rosli (2018) Study on the effects of nozzle distance to surface roughness of workpiece under minimum quantity lubricant (MQL) milling process. Journal of Modern Manufacturing Systems and Technology, 1. pp. 76-81. ISSN 2636-9575

Foo, Sheng Tong and Siew, Choo Chin and Mohd Tamizi, Mustafa and Huei, Ruey Ong and Khan, Maksudur R. and Jolius, Gimbun and Doh, Shu Ing (2018) Influence of alkali treatment on physico-chemical properties of Malaysian bamboo fiber: A preliminary study = Pengaruh rawatan alkali terhadap sifat-sifat fizikal-kimia serat buluh Malaysia: satu kajian awal. Malaysian Journal of Analytical Sciences, 22 (1). pp. 143-150. ISSN 1394-2506

Faraj, Moneer A. and Fahmi, Samsuri and Abdalla, Ahmed N. (2018) Hybrid of Eddy Current Probe Based on Permanent Magnet and GMR Sensor. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-2). pp. 7-11. ISSN 2180-1843

Fayaz, Fahim and Herma Dina, Setiabudi and Nguyen Vo, Dai-Viet and Nguyen Thi, Anh Nga and Thong Lee, Minh Pham and Huong Thi, Danh and Bawadi, Abdullah (2018) Hydrogen production form ethanol dry reforming over lanthania-promoted Co/Al2O3 catalyst. IIUM Engineering Journal, 19 (1). pp. 24-33. ISSN 1511-788X

Fiorini, Paula De Camargo and Jabbour, Charbel Jose Chiappetta and Jabbour, Ana Beatriz Lopes de Sousa and Stefanelli, Nelson Oliveira and Fernando, Yudi (2018) Interplay between information systems and environmental management in ISO 14001-certified companies: Implications for future research on big data. Management Decision. pp. 1-18. ISSN 0025-1747

Fernando, Yudi and Walters, Tim and Mohamad Norris, Ismail and Seo, Yong Won and Kaimasu, Masatoshi (2018) Managing project success using project risk and green supply chain management. International Journal of Managing Projects in Business, 11 (2). pp. 332-365. ISSN 1753-8378

Faraj, Moneer A. and Fahmi, Samsuri and Abdalla, Ahmed N. and Damhuji, Rifai and Kharudin, Ali and Al-Douri, Y. (2018) Response Surface Methodology for Optimizing Giant Magneto-Resistive (GMR)-Bobbing Coil Probe for Carbon Steel Pipeline Crack Detection. International Journal of Engineering & Technology, 7 (3.28). pp. 218-226. ISSN 2227-524X

Fauziah, Zainuddin and Ruzaini, Abdullah Arshah and Rozlina, Mohamed (2018) Reviewing the Challenge and Practices of Human Factor Involvement in Requirement Specification Validation. Advanced Science Letters, 24 (10). pp. 7322-73227. ISSN 1936-6612

Farooq, Hira and Rasool, Nasir and Ansari, Muhammad Tayyab and Rizwan, Komal and Iqbal, Sarosh and Mahmood, Tariq and Israr, Hira and Ayub, Khurshid and Rasheed, Tahir and Seema, Zareen and Akhtar, Muhammad Nadeem (2018) Selective arylation of phenol protected propygyl bromide via pd-catalysed Suzuki coupling reaction: synthesis, mechanistic studies by DFT calculations and their pharmacological aspects. Acta Poloniae Pharmaceutica - Drug Research, 75 (4). pp. 911-919. ISSN 0001-6837

Fazea, Yousef and Mezhuyev, Vitaliy (2018) Selective mode excitation techniques for mode-division multiplexing: A critical review. Optical Fiber Technology, 45. pp. 280-288. ISSN 1068-5200

Fernini, B. and Temmar, M. and M. M., Noor (2018) Toward a dynamic analysis of bipedal robots inspired by human leg muscles. Journal of Mechanical Engineering and Sciences (JMES), 12 (2). pp. 3593-3604. ISSN 2231-8380 (online)

Fernando, Yudi and Bee, Poh Swan and Jabbour, Charbel Jose Chiappetta and Thomé, Antônio Márcio Tavares (2018) Understanding the effects of energy management practices on renewable energy supply chains: Implications for energy policy in emerging economies. Energy Policy, 118. pp. 418-428. ISSN 0301-4215

Farah Adiba, Azman and Mohd Razali, Daud and Amir Izzani, Mohamed and Irawan, Addie and Raja Mohd Taufika, Raja Ismail (2018) Vision-based object’s shape determination for robot alignment. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-2). pp. 111-115. ISSN 2180-1843 (Print); 2289-8131 (Online)

Fatemeh, D. B. and Loo, C. K. and Kanagaraj, G. and Ponnambalam, S. G. (2018) A hybrid SP-QPSO algorithm with parameter free adaptive penalty method for constrained global optimization problems. Journal of Modern Manufacturing Systems and Technology, 1. pp. 15-26. ISSN 2636-9575

Fernando, Yudi and Chidambaram, Ramanathan R. M. and Wahyuni-TD, Ika Sari (2018) The impact of Big Data analytics and data security practices on service supply chain performance. Benchmarking: An International Journal, 25 (9). pp. 4009-4034. ISSN 1463-5771

Fa, Ji Yuan and Jie, Tian Lian and Yan, Sun Xi and Suqing, Yan and Kamarul Hawari, Ghazali and Khatuni, S. (2018) An improved Multipath Estimating Delay-Lock-Loop method based on Teager-Kaiser operator. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-2). pp. 49-53. ISSN 2180-1843

Fatimah, Dzaharudin and Ooi, A. and Manasseh, R. (2017) Effects of Boundary Proximity on Monodispersed Microbubbles in Ultrasonic Fields. Journal of Sound and Vibration, 410 (8). pp. 330-342. ISSN 0022-460X

Fatanah, M. Suhaimi and Ummu Kulthum, Jamaludin and Normy Norfiza, A. Razak and Azrina, Md Ralib and Mohd Basri, Mat Nor (2017) Performance of Glycemic Control Protocol and Virtual Trial. Advanced Science Letters, 23 (6). pp. 5415-5418. ISSN 1936-6612

Fauziah, Zainuddin and Ruzaini, Abdullah Arshah and Rozlina, Mohamed and Rahmah, Mokhtar (2017) Human Factor of Formal Engineering Methods in Validating Requirement Specification. Advanced Science Letters, 23 (6). pp. 5481-5486. ISSN 1936-6612

F., Basrawi and Thamir K., Ibrahim and Khairul, Habib and Yamada, Takanobu and D. M. N., D. Idris (2017) Techno-Economic Performance of Biogas-Fueled Micro Gas Turbine Cogeneration Systems in Sewage Treatment Plants: Effect of Prime Mover Generation Capacity. Energy, 124. pp. 238-248. ISSN 1876-6102

Fakhrulddin, Sarmad K. and Abdulbari, Hayder A. and Ahmad Ziad, Sulaiman and Rafeeq, Hind A. (2017) The Effect of HTAC Addition on the Efficiency of PEO in Turbulent Flow. Indian Journal of Science and Technology, 10 (2). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

Faraj, Moneer A. and Abdalla, Ahmed N. and Fahmi, Samsuri and Damhuji, Rifai and Kharudin, Ali (2017) Investigate of the Effect of Width Defect on Eddy Current Testing Signals Under Different Materials. Indian Journal of Science and Technology, 10 (2). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

Foo, Sheng Tong and Chin, Siew Choo and Doh, Shu Ing and Jolius, Gimbun (2017) Natural Fiber Composites as Potential External Strengthening Material – A Review. Indian Journal of Science and Technology, 10 (2). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

Fatinah, Ab Rahman and Syarifah, Abd Rahim and Tan, Chou C. and Han, L. S. and Noor Ashila, Ramle (2017) Carbamazepine-Fumaric Acid and Carbamazepine-Succinic Acid Co-crystal Screening Using Solution Based Method. International Journal of Chemical Engineering and Applications (IJCEA), 8 (2). pp. 136-140. ISSN 2010-0221

Fui-Ling, Voon and Mohd Roslan, Sulaiman and Akhtar, Muhammad Nadeem and Mohamad Fauzi, Idris and Ahmad, Akira and Enoch Kumar, Perimal and Daud, Ahmad Israf and Lee, Ming-Tatt (2017) Cardamonin (2′,4′-dihydroxy-6′-methoxychalcone) Isolated from Boesenbergia Rotunda (L.) Mansf. Inhibits CFA-induced Rheumatoid Arthritis in Rats. European Journal of Pharmacology, 794. pp. 127-134. ISSN 0014-2999

Fatin Nabilah, Giman and Ping, Jack Soh and Mohd Faizal, Jamlos and H., Lago and Azremi Abdullah, Al-Hadi and Mohamedfareq, Abdulmalek and Nidhal, Abdulaziz (2017) Conformal Dual-band Textile Antenna with Metasurface for WBAN Application. Applied Physics A, 123 (32). pp. 1-7. ISSN 0947-8396 (Print) 1432-0630 (Online)

Fernando, Yudi and Sharon, Shih Sim Tan and Wahyuni-TD, Ika Sari and Tundys, Blanka (2017) The Effects of Reverse Logistics on Cost Control Abilities: An Insight into Manufacturing Companies in Malaysia. International Journal of Value Chain Management (IJVCM), 8 (4). pp. 285-306. ISSN 1741-5365

Fakhrulddin, Sarmad K. and Abdulbari, Hayder A. (2017) Enhancement of PEO Performance in Reducing Turbulent Flow Drag with the Addition of SDBS Anionic Surfactant. Journal of Engineering Research, 5 (3). pp. 64-75. ISSN 2307-1885

Fiona Ling, Wang Ming and Abdulbari, Hayder A. (2017) Enhancing the Flow in Microchannel using Natural Polymeric Additives. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

Fakhrur Razil Alawi, Abdul Wahid and Suriyati, Saleh and Noor Asma Fazli, Abdul Samad (2017) Estimation of Higher Heating Value of Torrefied Palm Oil Wastes from Proximate Analysis. Energy Procedia, 138. pp. 307-312. ISSN 1876-6102

Farah Hanani, Zulkifli and Jahir Hussain, Fathima Shahitha and Zeyohannes, Senait Sileshi and Mohammad Syaiful Bahari, Abdull Rasad and M. M., Yusoff (2017) A Facile Synthesis Method of Hydroxyethyl Cellulose-Silver Nanoparticle Scaffolds for Skin Tissue Engineering Applications. Materials Science and Engineering: C, 79. pp. 151-160. ISSN 0928-4931

Fatin Syazwana, Hashim and Wan Mohd Hafizuddin, Wan Yussof and Mah, Kah Hong and Nurul Fatihah, Mahamad Roli and Syed Mohd Saufi, Tuan Chik and Mazrul Nizam, Abu Seman and Abdul Wahab, Mohammad (2017) Factors Affecting Enzymatic Hydrolysis from Pretreated Fibre Pressed Oil Palm Frond Using Sacchariseb C6. Journal of Physical Science, 28 (Supp.1). pp. 281-295. ISSN 1675-3402 (print); 2180-4230 (online)

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and N. S. M., Noor and Zahari, Taha and Zulkifli, Ahmad and K., Kadirgama and Nasrul Hadi, Johari and N. H., Mohamed (2017) A Finite Element Analysis of a Recurve Bow Riser using Carbon Fibre Hybrid Composites. Advanced Science Letters, 23 (11). pp. 11467-11470. ISSN 1936-6612

Fazilah, Abdul Aziz and Zakri, Ghazali and N. M. Zuki, N. M. and Amri, Isfar and N. S. M., Shalahim (2017) G3-4 musculoskeletal discomforts among assembly team members performing assembly welding task. The Japanese Journal of Ergonomics, 53 (Supplement2). pp. 466-469. ISSN 1884-2844

Fernando, Yudi and Wei, Lin Hor (2017) Impacts of Energy Management Practices on Energy Efficiency and Carbon Emissions Reduction: A Survey of Malaysian Manufacturing Firms. Resources, Conservation and Recycling, 126. pp. 62-73. ISSN 0921-3449

Fatanah, M. Suhaimi and Chase, J. Geoffrey and Pretty, Christopher G. and Shaw, Geoffrey M. and Normy Norfiza, A. Razak and Ummu Kulthum, Jamaludin (2017) Insulin Sensitivity and Sepsis Score: A Correlation between Model-based Metric and Sepsis Scoring System in Critically Ill Patients. Biomedical Signal Processing and Control, 32. pp. 112-123. ISSN 1746-8094

Fazliana, Fauzun and S. N., Aqida and I., Ismail and Norhafzan, Bariman (2017) Micro-Bulges Investigation on Laser Modified Tool Steel Surface. MATEC Web of Conferences, 95. pp. 1-4. ISSN 2261-236X

Faiz, Mohd Turan and Aikhuele, Daniel Osezua (2017) Need for Reliability Assessment of Parent Product before Redesigning a New Product. Current Science, 112 (1). pp. 10-11. ISSN 0011‐3891

Fatin Syazwana, Hashim and Hafizuddin, Wan Yussof and Mior Ahmad Khushairi, Mohd Zahari and Roshanida, A. Rahman and Rosli, Md Illias (2017) Physicochemical and Morphological Characterisation of the Native and Alkaline Pre-treated Fibre Pressed Oil Palm Frond for Fermentable Sugars Production. Chemical Engineering Transaction, 56 (2017). pp. 1087-1092. ISSN 2283-9216

Fatmawati, Latada and Hafizoah, Kassim (2017) Problem-oriented project -based learning (POPBL): an initiative to encourage soft skills expansion among students at a public university. Journal of Global Business and Social Entrepreneurship, 1 (3). pp. 75-83. ISSN 2462-1714

Fatmawati, Latada and Hafizoah, Kassim (2017) Project-oriented problem-based learning (POPBL): an initiative to enrich soft skills among students at a public university. Journal Of Global Business And Social Entrepreneurship (GBSE), 1 (3). pp. 75-83. ISSN 2462-1714

Farhan, Mohd Said and Tan, Kai Quan (2017) Recovery of the biological active compounds of Musa Sp. through microwave assisted extraction. IIUM Engineering Journal, 18 (2). pp. 105-116. ISSN 2289-7860

F., Wasbari and R. A., Bakar and Gan, Leong Ming and Musthafah, M. T. and A. A., Yusof (2017) A Review of Compressed-air Hybrid Technology in Vehicle System. Renewable and Sustainable Energy Reviews, 67. pp. 935-953. ISSN 1364-0321

Faridah, Taju Rahim and Yuserrie, Zainuddin (2017) Study On The Impact Of Linkage Capabilities On Technological Competitive Advantage And Firm Performance In The Automotive Industry In Malaysia. International Journal of Industrial Management (IJIM), 3. pp. 61-88. ISSN 2289-9286 (Print); 0127-564x (Online)

Faiz, Mohd Turan and Kartina, Johan and Nik Hisyamudin, Muhd Nor and Badrul, Omar (2017) Sustainability Assessment Model in Product Development. IOP Conference Series: Materials Science and Engineering, 226. pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online)

Fernando, Yudi and Wen, Xin Wah (2017) The impact of Eco-innovation Drivers on Environmental Performance: Empirical Results from the Green Technology Sector in Malaysia. Sustainable Production and Consumption, 12. pp. 27-43. ISSN 2352-5509

Fakharuddin, Azhar and De Rossi, Francesca and Watson, Trysten M. and Scmidt-Mende, Lukas and Rajan, Jose (2016) Research Update: Behind the High Efficiency of Hybrid Perovskite Solar Cells. APL Materials , 4 (091505). pp. 1-16. ISSN 2166-532X

Faiz, Mohd Turan and Kartina, Johan (2016) Assessing Sustainability Framework Of Automotive-Related Industry in the Malaysia Context Based on GPM P5 Standard. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7606-7611. ISSN 1819-6608

Fathimah, Abdul Halim and M. S., Najib and Kamarul Hawari, Ghazali and Muhamad Faruqi, Zahari and Abdul Aziz, Mohd Azoddein (2016) Classification of Ammonia Odor-profile Using k-NN Technique. Journal of Electrical, Electronics, Control and Instrumentations Engineering (JEECIE), 1 (9). pp. 42-46. ISSN 2462-2303

F., Basrawi and Ibrahim, Thamir K. and Khairul, Habib and Yamada, Takanobu (2016) Effect of Operation Strategies on the Economic and Environmental Performance of a Micro Gas Turbine Trigeneration System in a Tropical Region. Energy, 97. pp. 262-272. ISSN 0360-5442 (Print), 1873-6785 (Online)

Farhan, Mohd Said and Nor Farhana, Hamid (2016) Factorial Design Screening For the Red Pigment Production By Monascus Purpureus FTC 535. Jurnal Teknologi, 78 (11-2). pp. 13-17. ISSN 2180-3722

F., Wasbari and R. A., Bakar and Gan, Leong Ming and M. A., Salim (2016) Feasibility Studies on Utilization of Low-Pressure in Hydro-pneumatic Driveline. Journal of Engineering and Technology (JET), 7 (2). pp. 28-42. ISSN 2180-3811

Foo, Weng Kar and Muhammad Afiq, Yusof and Sorooshian, Shahryar and Syed Radzi, Rahamaddulla (2016) Implementation of Total Quality Management and ISO 9000 Certification. International Journal of Engineering Applied Sciences and Technology, 1 (6). pp. 33-36. ISSN 2455-2143

Faiz, Mohd Turan (2016) Incorporating Customer Requirements in Assessing Criteria Based On Triz - A Case Study. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7558-7564. ISSN 1819-6608

F. R. M., Romlay and Wan Azhar, Wan Yusoff and Kamal Arifin, Mat Piah (2016) Increasing the Efficiency of Traveling Wave Ultrasonic Motor by Modifying the Stator Geometry. Ultrasonics Sonochemistry, 64. pp. 177-185. ISSN 1350-4177

Fiona Ling, Wang Ming and Abdulbari, Hayder A. and Noraishah, Abdul Latip and Heidarinik, Somaye (2016) Insoluble Nano-powders Additives Enhancing the Flow of Liquid in Microchannel: Effect of Particle Size. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2146-2152. ISSN 1819-6608

Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Mohd Warid, Hussin (2016) Long Term Investigation on Sulphate Resistance of Aerated Concrete Containing Palm Oil Fuel Ash. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2406-2411. ISSN 1819-6608

Fayaz, Fahim and Danh, Huong T. and Nguyen-Huy, Chinh and Vu, Khanh B. and Bawadi, Abdullah and Vo, Dai-Viet N. (2016) Promotional Effect of Ce-dopant on Al2O3-supported Co Catalysts for Syngas Production via CO2 Reforming of Ethanol. Procedia Engineering, 148. pp. 646-653. ISSN 1877-7058

Fatmawati, Latada (2016) Reliability and Validity of UMP-KI Items. International Journal of Humanities Technology and Civilization (IJHTC), 1. pp. 11-21. ISSN 2289-7216

Firas, D. Ahmed and Mazlina, Abdul Majid and Mohd Sharifuddin, Ahmad and Aws Naser, Jaber (2016) Software Agent And Cloud Computing: A Brief Review. International Journal of Software Engineering & Computer Sciences (IJSECS), 2. pp. 108-113. ISSN 2289-8522

Fatmawati, Adam and Siti Hana, A. B. and Saiful Nizam, Tajuddin and M. M., Yusoff (2016) Solvent Role in Molecular Recognition of Patchouli Extraction Process. Asian Journal of Chemistry , 28 (6). pp. 1253-1257. ISSN 1253-1257

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and Zahari, Taha and K., Kadirgama and Nasrul Hadi, Johari (2015) The Investigation of Mechanical Properties on Natural Fiber Composites for Recurve Bow Material Selection. Advances in Environmental Biology, 9 (25). pp. 27-31. ISSN 1995-0756(Print); 1998-1066(Online)

Fatchurrohman, Nanang and Suraya, Sulaiman and S. M., Sapuan and M. K. A., Ariffin and B. T. H. T., Baharuddin (2015) Analysis of a Metal Matrix Composites Automotive Component. International Journal of Automotive and Mechanical Engineering (IJAME), 11 (June). pp. 2531-2540. ISSN 1985-9325(Print); 2180-1606 (Online)

Farhan, Mohd Said (2015) Development of Simvastatin Production by Monascus Purpureus In Solid-State Fermentation Using Agricultural Product. Journal of Engineering and Technology, 6 (2). pp. 18-28. ISSN 2180-3811

Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Mohd Warid, Hussin (2015) Effect of Curing Regime on Compressive Strength of Aerated Concrete Containing Palm Oil Fuel Ash as Partial Sand Replacement. Concrete Research Letters, 6 (2). pp. 54-59. ISSN 2180-1371

F., Basrawi and K., Habib and Hassan, Ibrahim and Lee, Giok Chui (2015) Effect of Solar Fraction on the Economic Performance of a Solar Air Conditioning by an Adsorption Chiller. Jurnal Intelek, 9 (2). pp. 14-20. ISSN 2231-7716

F., Basrawi and Thamir K., Ibrahim and Giok, Chui Lee and Khairul, Habib and Hassan, Ibrahim (2015) Effect of Solar Fraction on the Economic and Environmental Performance of Solar Air-Conditioning by Adsorption Chiller in a Tropical Region. Journal of Solar Energy Engineering, 137 (6). 061009-1. ISSN 0199-6231 (print); 1528-8986 (online)

Fatanah, M. Suhaimi and Chase, J. Geoffrey and Pretty, G. Christopher and Shaw, M. Geoffrey and Normy, Razak and Ummu Kulthum, Jamaludin (2015) Insulin Sensitivity as a Model-Based Marker for Sepsis Diagnosis. IFAC-PapersOnLine, 48 (20). pp. 372-376. ISSN 2405-8963

F., Basrawi and Hassan, Ibrahim and Yamada, Takanobu (2015) Optimal Unit Sizing of Biogas-Fuelled Micro Gas Turbine Cogeneration Systems in a Sewage Treatment Plant. Energy Procedia, 75. pp. 1052-1058. ISSN 1876-6102

Fazlul Rahman, Mohd Yunus and Ruzairi, Abdul Rahim and Leow, Pei Ling and Nor Muzakkir, Nor Ayob and Yasmin, Abdul Wahab and Suzanna, Ridzuan Aw and Anita, Ahmad and Nasarudin, Ahmad and Mohd Hafiz, Fazalul Rahiman (2015) Simulation of Electrode for Dual-Modality Electrical Resistance Tomography and Ultrasonic Transmission Tomography for Imaging Two-Phase Liquid and Gas. Jurnal Teknologi (Sciences and Engineering), 77 (17). pp. 55-61. ISSN 0127-9696 (print); 2180-3722 (online)

Faridah, Taju Rahim and Yuserrie, Zainuddin (2015) Study on the Impact of Technological Innovation Capabilities on Competitive Advantage and Firm Performance in the Automotive Industry in Malaysia: A Conceptual Framework. Journal of Scienctific Research & Development, 2 (13). pp. 194-202. ISSN 1115-7569

Fazliana, Fauzun and S. N., Aqida and Naher, S. and Brabazon, D. and Calosso, Francesco and Rosso, M. (2014) Effects of Thermal Fatigue on Laser Modified H13 Die Steel. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 975-980. ISSN 2289-4659 (print); 2231-8380 (online)

Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Nurhasshikin, Sulaiman (2014) Corrosion Resistance of High Strength Concrete Containing Palm Oil Fuel Ash as Partial Cement Replacement. Research Journal of Applied Sciences, Engineering and Technology, 7 (22). pp. 4720-4722. ISSN 2040-7459

Fakharuddin, Azhar and Irfan, Ahmed and Zulkeflee, Kalidin and M. M., Yusoff and Rajan, Jose (2014) Channeling of Electron Transport to Improve Collection Efficiency in Mesoporous Titanium Dioxide Dye Sensitized Solar Cell Stacks. Applied Physics Letters, 104 (053905). pp. 1-4. ISSN 0003-6951 (print); 1077-3118 (online)

Fakharuddin, Azhar and Irfan, Ahmed and Zulkeflee, Kalidin and M. M., Yusoff and Rajan, Jose (2014) Charge Transport Through Split Photoelectrodes in Dye-sensitized Solar Cells. Journal of Applied Physics, 115 (164509). pp. 1-9. ISSN 0021-8979 (print); 1089-7550 (online)

Fazilah, Abdul Aziz and Nur Najmiah, Jaafar and Suraya, Sulaiman (2014) Critical Success Factors of New Product Development and Impact on Performance of Malaysian Automotive Industry. Advanced Materials Research, 903. pp. 431-437. ISSN 1022-6680 (print), 1662-8985 (online)

Faiz, Mohd Turan and Badrul, Omar (2014) Design Evaluation Framework for Design Engineers using Improved Rough-Grey Analysis - A Case Study. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 366-373. ISSN 1991-8178

Faiz, Mohd Turan and Badrul, Omar (2014) Design Evaluation Method for Design Engineer in Manufacturing Industries using Integrated Rough-Grey Analysis Approach. Applied Mechanics and Materials, 660. pp. 1052-1056. ISSN 1662-7482

F., Basrawi and Yamada, Takanobu and Obara, Shinaya (2014) Economic and Evironmental based Operation Strategies of a Hybrid Photovoltaic-microgas Turbine Trigeneration System. Applied Energy, 121. pp. 174-183. ISSN 0306-2619

Firdaus, Muhammad-Sukki and Siti Hawa, Abu Bakar and Abu Bakar, Munir and Siti Hajar, Mohd Yasin and Roberto, Ramirez-Iniguez and Scott, G. McMeekin and Brian, G. Stewart and Narbin, Sarmah and Tapas, Kumar Mallick and Ruzairi, Abdul Rahim and Md. Ershadul, Karim and Salman, Ahmad and Razman, Mat Tahar (2014) Feed-in tariff for Solar Photovoltaic: The Rise of Japan. Renewable Energy, 68. pp. 636-643. ISSN 0960-1481

Faradila, Naim and Kian, Sheng Lim and Salinda, Buyamin and Anita, Ahmad and Mohd Ibrahim, Shapiai and Marizan, Mubin and Dong, Hwa Kim (2014) Improving Vector Evaluated Particle Swarm Optimisation using Multiple Nondominated Leaders. The Scientific World Journal, 2014. pp. 1-21. ISSN 2356-6140 (print); 1537-744X (online)

Fadzil, Mat Yahaya and Akbari, Abolghasem and Azamirad, Mahmoud and Fanodi, Mohsen (2014) Landslide Susceptibility Mapping Using Logistic Regression Analysis and GIS Tools. The Electronic Journal of Geotechnical Engineering (EJGE), 19. pp. 1687-1696. ISSN 1089-3032

Fatmawati, Adam and Siti Hana, A. B. and M. M., Yusoff and Saiful Nizam, Tajuddin (2014) Molecular Dynamic Simulation of the Patchouli Oil Extraction Process. Journal of Chemical & Engineering Data, 59 (2). pp. 183-188. ISSN 0021-9568

Falatoonitoosi, Elham and Shamsuddin, Ahmed and Sorooshian, Shahryar (2014) A Multicriteria Framework to Evaluate Supplier's Greenness. Abstract and Applied Analysis, 2014. pp. 1-12. ISSN 1085-3375 (Print); 1687-0409 (Online)

Fakharuddin, Azhar and Wali, Qamar and Irfan, Ahmed and Mohd Hasbi, Ab. Rahim and Jamil, Ismail and Rajan, Jose (2014) Multiporous Nanofibers of SnO2 by Electrospinning for High Efficiency Dye-Sensitized Solar Cells. Journal of Materials Chemistry A, 2 (41). pp. 17427-17434. ISSN 2050-7488 (print); 2050-7496 (online)

Farah Hanani, Zulkifli and Jahir Hussain, Fathima Shahitha and M. M., Yusoff and Mohammad Syaiful Bahari, Abdull Rasad (2014) Nanostructured Materials From Hydroxyethyl Cellulose For Skin Tissue Engineering. Carbohydrate Polymers, 114. pp. 238-245. ISSN 0144-8617

Fazliana, Fauzun and S. N., Aqida and Md Saidin, Wahab (2014) Optimisation of Pulsed Nd: YAG Laser Processing of Gray Cast Iron for Enhanced Surface Properties. Advanced Materials Research, 1024. pp. 215-218. ISSN 1022-6680 (print), 1662-8985 (online)

Fakharuddin, Azhar and Rajan, Jose and Brown, Thomas M. and Santiago, Francisco Fabregat (2014) A Perspective on the Production of Dye-sensitized Solar Modules. Energy & Environmental Science, 7 (12). pp. 3952-3981. ISSN 1754-5692 (print), 1754-5706 (online)

Fakharuddin, Azhar and Irfan, Ahmed and Qamar, Wali and Zulkeflee, Kalidin and M. M., Yusoff and Rajan, Jose (2014) Probing Electron Lifetime and Recombination Dynamics in Large Area Dye-Sensitized Solar Cells by Electrochemical Impedance Spectroscopy. Advanced Materials Research, 925. pp. 553-558. ISSN 1022-6680 (print), 1662-8985 (online)

Fadzil, Mat Yahaya and Namdar, Abdoullah (2014) Recent Advances on Study of Liquefaction and Time to Failure of Sandy Subsoil. The Electronic Journal of Geotechnical Engineering (EJGE), 19. pp. 1501-1517. ISSN 1089-3032

Fakhreldin, Mohammed Adam Ibrahim and Solanki, Dhanesh and Jasni, Mohamad Zain and Mazlina, Abdul Majid and Mohamad Fadli, Zolkipli (2014) Study of Security Layers Under Attack on Different Layers of Cloud Computing. Wulfenia Journal. ISSN 1561-882X (In Press)

Fatchurrohman, Nanang and Ismed, Iskandar and Suraya, Sulaiman and Kartina, Johan (2014) Sustainable Analysis in the Product Development of Al-Metal Matrix Composites Automotive Component. Applied Mechanics and Materials, 695. pp. 32-35. ISSN 1662-7482

Faiz, Mohd Turan and Badrul, Omar (2014) A Three-stage Methodology for Design Evaluation in Product Development. International Journal of Computers & Technology, 12 (6). pp. 3602-3625. ISSN 2277-3061

Fakharuddin, Azhar and M. M., Yusoff and Rajan, Jose and Archana, Panikar Sathyaseelan and Zulkeflee, Kalidin (2013) Standardization of Photoelectrode Area of Dye-Sensitized Solar Cells. RSC Advances, 3 (8). pp. 2683-2689. ISSN 2046-2069

Feng, Shangsu and A., Zulkiple (2013) The Application of Energy Saving Technology in High Rise Building a Lanzhou. Procedia Civil Engineering. pp. 1-4.

Farah Hanani, Zulkifli and Jahir Hussain, Fathima Shahitha and M. M., Yusoff and Nurul Nadiah, Hamidon and Sugandha, Chahal (2013) Cross-Linking Effect on Electrospun Hydroxyethyl Cellulose/Poly(Vinyl Alcohol) Nanofibrous Scaffolds. Procedia Engineering, 53. pp. 689-695. ISSN 1877-7058

Fatimah, Dzaharudin and Suslov, Sergey A. and Manasseh, Richard and Ooi, Andrew (2013) Effects of Coupling, Bubble Size, and Spatial Arrangement on Chaotic Dynamics of Microbubble Cluster in Ultrasonic Fields. The Journal of Acoustical Society of America, 134 (5). pp. 3425-3434. ISSN 0001-4966

Fadilah, Siali and Liu, Yao and Cheng, Jack Kie (2013) Inventory Management and Logistics Cost Reduction: A Case of a Malaysia Herbal Medicine Company. Technology and Investment, 4 (3). pp. 204-212.

Falatoonitoosi, Elham and Zulkiflle, Leman and Sorooshian, Shahryar (2013) Modeling for Green Supply Chain Evaluation. Mathematical Problems in Engineering, 2013 (201208). pp. 1-9. ISSN 1024-123X (print); 1563-5147 (online)

F., Basrawi and Hassan, Ibrahim and Mohd Yusof, Taib and Lee, Giok Chui (2013) Optimum Thickness of Wall Insulations and Their Thermal Performance for Buildings in Malaysian Climate. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1207-1217. ISSN 1985-9325(Print); 2180-1606 (Online)

Ferdous, Kaniz and Uddin, M. Rakib and Uddin, M. Rahim and Khan, Maksudur R. and Islam, M. A. (2013) Preparation and Optimization of Biodiesel Production from Mixed Feedstock Oil. Chemical Engineering and Science, 1 (4). pp. 62-66. ISSN 2328-7381

F., Basrawi and Yamada, Takanobu and Obara, Shin’ya (2013) Theoretical Analysis of Performance of a Micro Gas Turbine Co/Trigeneration System for Residential Buildings in a Tropical Region. Energy and Buildings, 67. pp. 108-117. ISSN 0378-7788

F., Basrawi and Takanobu, Yamada and Kimio, Nakanish and Hideaki, Katsumata (2012) Analysis of the Performances of Biogas-Fuelled Micro Gas Turbine Cogeneration Systems (MGT-CGSs) in Middle- and Small-Scale Sewage Treatment Plants: Comparison of Performances and Optimization of Mgts with Various Electrical Power Outputs. Energy, 38. pp. 291-304. ISSN 0360-5442

Fong-Woon, Lai and Noor Azlinna, Azizan (2012) Critical Review of Literature on Enterprise Risk Management and the Cost of Capital: The Value Creation Perspective. African Journal of Business Management, 6 (9). pp. 3126-3133. ISSN 1993-8233

Fadzida, Ismail and Noor Azlinna, Azizan and Nurhaizan, Mohd Zainudin and Suziyana, Mat Dahan and Lee, Chia Kuang (2012) Education Of Moral Principles in Future Construction Players. International Journal of Technology Management, 1. pp. 9-22. ISSN 2289-2753

Fazeeda, Mohamad and Razman, Mat Tahar (2012) Measuring Palm Oil Mill Capacity Using Modelling and Simulation. International Journal of Technology Management, 1. pp. 1-8. ISSN 2289-2753

Ferdous, Kaniz and Uddin, M. Rakib and Uddin, M. Rahim and Khan, Maksudur R. and M. A., Islam (2012) Optimization of Three-Step Method For Biodiesel Production From Waste Cook Oil. Journal of Chemical Engineering, 27 (2). pp. 6-10. ISSN 2221-7436

Faturachman, Danny and Shariman, Mustafa (2012) Performance of Safety Sea Transportation. Procedia - Social and Behavioral Sciences.

Ferdous, Kaniz and Uddin, M. Rakib and Islam, Rehnuma and Khan, Maksudur R. and Islam, M. A. (2012) Potentiality of Biodiesel Production From Non-Edible Oil: Bangladesh Perspective. Journal of Chemical Engineering, 27 (2). pp. 1-5. ISSN 2221-7436

Farid Ahammad, Sobhani and Azlan, Amran and Yuserrie, Zainuddin (2012) Sustainability Disclosure in Annual Reports and Websites: A Study of the Banking Industry in Bangladesh. Journal of Cleaner Production, 23 (1). pp. 75-85. ISSN 0959-6526

Foo, Say Yei and Cheng, C. K. and Nguyen, Tuan-Huy and Adesina, Adesoji A. (2012) Syngas Production from CH4 Dry Reforming Over Coeni/Al2O3 Catalyst: Coupled Reaction-Deactivation Kinetic Analysis and the Effect of O2 Co-Feeding on H2:CO Ratio. International Journal of Hydrogen Energy, 37 (22). 17019 -17026. ISSN 0360-3199

Faturachman, Danny and Shariman, Mustafa (2012) Trend Analysis of Ship Accidents in Indonesia. World Academy of Science, Engineering and Technology (2 (Jan). ISSN 2010-376x; 2010-3778 (electronic)

Farzad, Tahriri and Zahari, Taha (2010) The Concept of Integrating Virtual Group (VG) and Agile Supplier Selection (ASS). Journal of Business Management and Economics, 1 (1). pp. 32-37.

F. R. M., Romlay and M. E., Wahab and M. I. A., Halim and M. H. M., Saad (2008) Failure Analyse Prediction of Bolts Component Using Probality Method. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 59-66. ISSN 1985-5176

F. R. M., Romlay (2008) Modeling Of A Surface Contact Stress For Spur Gear Mechanism Using Static And Transient Finite Element Method. Journal of Structural Durability & Health Monitoring (SDHM), Tech Science Press, 4 (1). pp. 19-27. ISSN 1930-2983

F. R. M., Romlay and Asmizam, Mokhtar (2008) Modeling of a Surface Contact Stress for a Gear System Using Finite Element Method. SDHM: Structural Durability & Health Monitoring, 4 (1). pp. 19-28. ISSN 1930-2983 (Print); 1930-2991 (Online)

G

Gnaneshwar, Puvala Vijayakumar and Sudakaran, Shruthi Vathaluru and Abisegapriyan, Sivasubramanian and Sherine, Jositta and Ramakrishna, Seeram and Mohd Fadzil, Abdul Rahim and M. M., Yusoff and Rajan, Jose and Venugopal, Jayarama Reddy (2019) Ramification of zinc oxide doped hydroxyapatite biocomposites for the mineralization of osteoblasts. Materials Science and Engineering: C, 96. pp. 337-346. ISSN 0928-4931

Gimbun, J. and Nguang, S.L. and Pang, S.F. and Yeong, Y.L. and Kee, K.L. and Chin, S.C. (2019) Assessment of phenolic compounds stability and retention during spray drying of phyllanthus niruri extracts. Industrial and Engineering Chemistry Research, 58 (2). pp. 752-761. ISSN 0888-5885

Ghawanmeh, Abdullah A. and K. F., Chong and Sarkar, Shaheen M. and Muntaz, Abu Bakar and Rizafizah, Othaman and Rozida, M. Khalid (2018) Colchicine Prodrugs and Codrugs: Chemistry and Bioactivities. European Journal of Medicinal Chemistry, 144. pp. 229-242. ISSN 0223-5234

Gul, Yasmeen and Sultan, Zahid and Jokhio, Gul Ahmed (2018) The association between the perception of crime and walking in gated and non-gated neighbourhoods of Asian developing countries. Heliyon, 4 (8). pp. 1-15. ISSN 2405-8440

Ganapathy, Veanuga and Kurniawan, Tedi and Mas Ayu, Hassan and Asmara, Y. P. and R., Daud and Prastomo, Niki and Dani Nandiyanto, Asep Bayu (2018) Aluminum alloy AA2024 coated with ZrO2 using a sol-gel-assisted dip-coating technique and its corrosion performance. Journal of Engineering Science and Technology, 13 (6). pp. 1713-1721. ISSN 1823-4690

Ghanem, Eman and Muhammad Nubli, Abdul Wahab (2018) Effects of Quran Recitation on Heart Rate Variability as an indicator of Student Emotions. International Journal of Academic Research in Business and Social Sciences (IJARBSS), 8 (4). pp. 89-103. ISSN 2222-6990

G. M., Salim and Mohd Anwar, Zawawi (2018) Knee joint movement monitoring device based on optical fiber bending sensor. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-3). pp. 25-29. ISSN 2180-1843 (Print); 2289-8131 (Online)

Gul, Yasmeen and Zahid, Sultan and Moeinaddini, Mehdi and Jokhio, Gul A. (2018) Measuring the differences of neighbourhood environment and physical activity in gated and non-gated neighbourhoods in Karachi, Pakistan. Journal of Urban Design. pp. 1-20. ISSN 1357-4809 (In Press)

Gul, Yasmeen and Sultan, Zahid and Moeinaddini, Mehdi and Jokhio, Gul A. (2018) The effects of physical activity facilities on vigorous physical activity in gated and non-gated neighborhoods. Land Use Policy, 77. pp. 155-162. ISSN 0264-8377

Gouda, Gamal Abdelaziz Hussein and Ali, Gomaa A. M. (2017) Potentiometric Study of Rhenium(V) Complex Formation With Azathioprine And Ceftriaxone. Malaysian Journal of Analytical Sciences, 21 (6). pp. 1266-1275. ISSN 1394-2506

Gopalakrishnan, Siva and Ummu Kulthum, Jamaludin (2017) Investigation on different types of blood glucose control system. Journal of Mechanical Engineering, SI(4) (2). pp. 135-152. ISSN 1823- 5514 (Print); 2550-164X (Online)

Ghazi Faisal, Najmuldeen and Hariitaraan, Fatmanathan and Ghasak, Ghazi Faisal and Zulkafli, Hassan (2017) Characterization of Eurycoma longifolia (Tongkat Ali) Essential Oils Extracted by Microwave Assisted Extraction. Journal of Applied Pharmaceutical Science, 7 (6). 062-068. ISSN 2231-3354

Gallego, Maria Gabriela and Skowyra, Monika and Gordon, Michael H. and Nurul Aini, Mohd Azman and Almajano, Maria Pilar (2017) Effect of Leaves of Caesalpinia decapetala on Oxidative Stability of Oil-in-Water Emulsions. Antioxidants, 6 (1). pp. 1-17. ISSN 2076-3921

Gajendran, Natarajan and Jolius, Gimbun and Ranganathan, Balu (2017) Chemical Engineering Allied Fields - International Conference on Fluids and Chemical Engineering FluidsChE 2017, Malaysia, Special Issue, Vol: 3. Indian Journal of Science and Technology, 10 (7). pp. 1-4. ISSN 0974-6846 (Print); 0974-5645 (Online)

Gulraiz, Ahmad and Rasool, Nasir and Ikram, Hafiz Mansoor and Khan, Samreen Gul and Mahmood, Tariq and Ayub, Khurshid and Zubair, Muhammad and Al-Zahrani, Eman and Rana, Usman Ali and Akhtar, Muhammad Nadeem and Noorjahan Banu, Alitheen (2017) Efficient Synthesis of Novel Pyridine-Based Derivatives via Suzuki Cross-Coupling Reaction of Commercially Available 5-Bromo-2-methylpyridin-3-amine: Quantum Mechanical Investigations and Biological Activities. Molecules, 22 (2). pp. 1-19. ISSN 1420-3049 (print); 1420-3049 (online)

Gupta, Vinod Kumar and Agarwal, Shilpi and Sadegh, Hamidreza and Ali, Gomaa A. M. and Bharti, Arvind Kumar and Makhlouf, Abdel Salam Hamdy (2017) Facile Route Synthesis of Novel Graphene Oxide-β-cyclodextrin Nanocomposite and Its Application as Adsorbent for Removal of Toxic Bisphenol A from the Aqueous Phase. Journal of Molecular Liquids, 237. pp. 466-472. ISSN 0167-7322

Gupta, Ritu and Noraziah, Ahmad and Gupta, Arun and Abdalla, Ahmed N. (2017) Overview of Simulation in Wood Plastic Composites Manufacturing. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online)

G., Ibragimov and Ahmedov, Anvarjon A. and Puteri, Nur Izzati and N. , Abdul Manaf (2017) Pursuit Differential Game Described by Infinite First Order 2-Systems of Differential Equations. Malaysian Journal of Mathematical Sciences, 11 (2). pp. 181-190. ISSN 18238343

Goh, Chiew Loon and Ruzairi, Abdul Rahim and Hafiz Fazalul, Rahiman and Tee, Zhen Cong and Yasmin, Abdul Wahab (2017) Simulation and Experimental Study of The Sensor Emitting Frequency for Ultrasonic Tomography System in a Conducting Pipe. Flow Measurement and Instrumentation, 54. pp. 158-171. ISSN 0955-5986

Gupta, Ritu and Noraziah, Ahmad and Gupta, Arun and Ainul Azila, Che Fauzi (2017) Wood Plastic Composites (WPC)-Challenges in Prediction of Properties. Advanced Science Letters, 23 (11). pp. 11035-11039. ISSN 1936-6612

Giacomo, Francesco Di and Azhar, Fakharuddin and Rajan, Jose and Brown, Thomas M. (2016) Progress, Challenges and Perspectives in Flexible Perovskite Solar Cells. Energy and Environmental Science, 9. pp. 3007-3035. ISSN 1754-5692 (Print); 1754-5706 (Online)

Gaanty Pragas, Maniam and Rehan, Zainol Abidin and Mohd Hasbi, Ab. Rahim (2016) Transesterification of Waste Cooking Oil using Calcium Loaded on Deoiled Spent Bleaching Clay as a Solid Base Catalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 176-181. ISSN 1978-2993

Guni, Geogia and Irawan, Addie (2016) Identification and Characteristics of Parallel Actuation Robot’s Leg Configuration Using Hammerstein-Wiener Approach. Journal of Electrical, Electronics, Control and Instrumentations Engineering (JEECIE), 1 (10). pp. 48-62. ISSN 2462-2303

Gan, Gek Hian and Suriyati, Saleh and Noor Asma Fazli, Abdul Samad (2016) A Generic Thermodynamic Equilibrium Model-Based Framework For Biomass Gasification Processes. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2222-2229. ISSN 1819-6608

Gaanty Pragas, Maniam and Nurul Hajar, Embong and Mohd Hasbi, Ab. Rahim and Lee, Keat Teong and Huisingh, Donald (2016) Utilization of Palm Fatty Acid Distillate in Methyl Esters Preparation using SO42/TiO2-SiO2 as a Solid Acid Catalyst. Journal of Cleaner Production, 116. pp. 244-248. ISSN 0959-6526 (print), 1879-1786 (online)

Gran, Badshah and Liew, Siau-Chuin and Jasni, Mohamad Zain and Mushtaq, Ali (2016) Watermarking of Ultrasound Medical Images in Teleradiology Using Compressed Watermark. Journal of Medical Imaging, 3 (1). 017001. ISSN 2329-4302 (print); 2329-4310 (online)

Gholipour, Amir and Akbari, Abolghasem (2015) Sensitivity Analysis of Wastewater Flow Quality in A Channel Under The Influence of Hydraulic Retention Time Variations. International Journal of Civil Engineering and Geo-Environmental, 6 (1). pp. 1-5. ISSN 2180-2742

Gisen, J. I. A. and Savenije, H. H. G. and Nijzink, R. C. (2015) Revised Predictive Equations for Salt Intrusion Modelling in Estuaries. Hydrology and Earth System Sciences, 19. pp. 2791-2830. ISSN 1027-5606

Gisen, J. I. A. and Savenije, H. H. G. (2015) Estimating Bankfull Discharge and Depth in Ungauged Estuaries. Water Resources Research, 51 (4). pp. 2298-2316. ISSN 1944-7973

Gan, Leong Ming and Law, Hoon Chit and R. A., Bakar (2015) Development of a Briquetting Facility with the Integration of a Hydraulic System for Biomass Densification. Energy and Sustainability V: Special Contributions, 206. pp. 335-345. ISSN 1743-3541

Gesang, Nugroho and Zahari, Taha and Tedy, Setya Nugraha and Hatyo, Hadsanggeni (2015) Development of a Fixed Wing Unmanned Aerial Vehicle (UAV) for Disaster Area Monitoring and Mapping. Journal of Mechatronics, Electrical Power, and Vehicular Technology, 6 (2). pp. 83-88. ISSN 2087-3379

Ghafar, Hany H. Abdel and Ali, Gomaa A. M. and Fouad, Osama A. and Makhlouf, Salah A. (2015) Enhancement of Adsorption Efficiency of Methylene Blue on Co3O4/SiO2 Nanocomposite. Desalination and Water Treatment, 53 (11). pp. 2980-2989. ISSN 1944-3994

Gupta, Arun and Tanveer, Ahmad Khan and Saidatul Shima, Jamari and Rajan, Jose (2015) Examination of Selected Synthesis Parameters for Composite Adhesive-type Urea-Formaldehyde/activated Carbon Adhesives. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-6. ISSN 2289-697X

Geraldine Chan, Sue Ching and Willy Wong, Xiu Fa and Chong, Fui Chin (2015) Immobilization of Hepatitis B Antibody Onto the Reduced Graphene Oxide. Jurnal Teknologi (Sciences and Engineering), 77 (31). pp. 25-29. ISSN 0127-9696 (print); 2180-3722 (online)

Gran, Badshah and Liew, Siau-Chuin and Jasni, Mohamad Zain and Syifak Izhar, Hisham and Amatul, Zehra (2015) Importance of Watermark Lossless Compression in Digital Medical Image Watermarking. Research Journal of Recent Sciences, 4 (3). pp. 75-79. ISSN 2277-2502

G., Najafi and B., Ghobadian and Talal, Yusaf and Seyed Mohammad, Safieddin Ardebili and R., Mamat (2015) Optimization of Performance and Exhaust Emission Parameters of a SI (Spark Ignition) Engine with Gasoline–ethanol Blended Fuels using Response Surface Methodology. Energy, 90 (Prt 2.). pp. 1815-1829. ISSN 0360-5442 (Print), 1873-6785 (Online)

Gan, Siew Mei and Zynia, Fernandes Pearl and A. R., Yuvaraj and Lutfor, M. R. and Hegde, Gurumurthy (2015) Polarity Dependent Photoisomerization of Ether Substituted Azodyes: Synthesis and Photoswitching Behavior. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 149. pp. 875-880. ISSN 1386-1425 (print); 1873-3557 (online)

Gouda, Gamal A. and Ali, Gomaa A. M. and Elnasr, Tarek A. Seaf (2015) Stability Studies of Selected Metal Ions Chelates with 2-(4-amino-1,5- dimethyl-2-phenyl-1,2-dihydro-pyrazol-3-ylideneamino) Phenol. International Journal of Nanomaterials and Chemistry, 1 (2). pp. 39-44. ISSN 2090-9578 (Print); 2090-9586 (Online)

Gaanty Pragas, Maniam and Noor, Hindryawati and Irma, Nurfitri and Intan Shafinaz, Abd Manaf and Neshabran, Ramachandran and Mohd Hasbi, Ab. Rahim (2015) Utilization of Waste Fat from Catfish (Pangasius) in Methyl Esters Preparation Using Cao Derived from Waste Marine Barnacle and Bivalve Clam as Solid Catalysts. Journal of the Taiwan Institute of Chemical Engineers, 49. pp. 58-66. ISSN 1876-1070

Ghazirah, Mustapha and Wan Ruzaini, Wan Sulaiman and Anwar, P. P. Abdul Majeed and Nur Hayati, Mohd Yahya and Jamaluddin, Mahmud (2014) Kinematics and Efficacy Analysis of the Seni Silat Cekak Malaysia (Kaedah A). Applied Mechanics and Materials, 680. pp. 267-270. ISSN 1662-7482

G., Ponnarasy and Khan, Maksudur R. and Mohd Sabri, Mahmud and Kalam, Md. Abul (2014) Light Induced Esterification of Oleic Acid Catalyzed by Pseudomonas Cepacia Lipase. International Journal of Environmental Science and Development, 5 (4). pp. 344-346. ISSN 2010-0264

Gupta, Arun and Anuj, Kumar and Viswanathan Sharma , Korada (2014) Thermal and Mechanical Properties of Ureaformaldehyde (UF) Resin Combined with Multiwalled Carbon Nanotubes (MWCNT) as Nanofiller and Fiberboards Prepared by UF-MWCNT. Holzforschung = International Journal of the Biology, Chemistry, Physics, and Technology of Wood. pp. 1-7. ISSN 1437-434X

Gupta, Ritu and Norrozila, Sulaiman and Gupta, Arun and Beg, M. D. H. (2014) WPC Soft: Prototype Simulation Software to Predict the Internal Changes During Hot Pressing Q1 of Wood Plastic Composites. Chemical Product and Process Modeling. pp. 1-13.

Gaanty Pragas, Maniam and Kuppusamy, Palaniselvam and M. M., Yusoff and Natanamurugaraj, Govindan (2013) A case study - Regulation and Functional Mechanisms of Cancer Cells and Control its Activity Using Plants and their Derivatives. Journal of Pharmacy Research , 6 (Issue ). pp. 884-892. ISSN 0974-6943

Gaanty Pragas, Maniam and Noor, Hindryawati and Irma, Nurfitri and Rajan, Jose and Mohd Hasbi, Ab. Rahim and Farrah Aini, Dahalan and M. M., Yusoff (2013) Decanter Cake as a Feedstock for Biodiesel Production: A First Report. Energy Conversion and Management, 76 . pp. 527-532. ISSN 0196-8904

Gaanty Pragas, Maniam and Irma, Nurfitri and Noor, Hindryawati and M. M., Yusoff and Shangeetha, Ganesan (2013) Potential of Feedstock and Catalysts from Waste in Biodiesel Preparation: A Review. Energy Conversion and Management, 74. pp. 395-402. ISSN 0196-8904

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan and Melati, Khairuddean and Efendi, Jon (2013) A New Heterogeneous Acid Catalyst for Esterification: Optimization Using Response Surface Methodology. Energy Conversion and Management, 65. pp. 392-396. ISSN 0196-8904

Gharehghani, A. and Koochak, M. and Mirsalim, M. and Yusaf, Talal (2013) Experimental Investigation of Thermal Balance of a Turbocharged SI engine Operating on Natural Gas. Applied Thermal Engineering, 60 (1-2). pp. 200-207. ISSN 1359-4311

Gupta, Ritu and Norrozila, Sulaiman and Gupta, Arun (2013) An Improved Algorithm for Prediction of Young's Modulus of Wood Plastic Composites. Scientific Research and Essay , 8 (16). pp. 649-656. ISSN 1992-2248

G., Venkateswara Rao and Ramaraju, Ramgopal Varma (2013) Mechanical Postbuckling Behavior of Circular Plates Through Concept of Equivalent Radial Tensile Load. Journal of Structural Engineering, 40 (5). pp. 507-511.

Gupta, Arun and Khan, Tanveer Ahmed and Saidatul Shima, Jamari and Rajan, Jose and Mohammed, Nasir and Anuj, Kumar (2013) Synthesis and Characterization of Carbon Fibers and their Application in Wood Composites. BioResources, 8 (3). pp. 4171-4184. ISSN 1930-2126 (print); 1930-2126 (online)

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan and Melati, Khairuddean (2012) Sequential Conversion of High Free Fatty Acid Oils Into Biodiesel Using a New Catalyst System. Energy, 46 (Issue ). pp. 132-139. ISSN 0360-5442 (Print), 1873-6785 (Online)

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan and Melati, Khairuddean and Lee, Siew Ee (2012) A New Heterogeneous Acid Catalyst System for Esterification of Free Fatty Acids Into Methyl Esters. Applied Catalysis A: General, 433–43. pp. 12-17. ISSN 0926-860X

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan and Melati, Khairuddean (2012) Catalysts Derived from Waste Sources in the Production of Biodiesel Using Waste Cooking Oil. Catalysis Today, 190 (Issue ). pp. 117-121. ISSN 0920-5861

Gaanty Pragas, Maniam and Shangeetha, Ganesan and Boey, Peng Lim and Melati, Khairuddean and Sau-Lai, Lim (2012) A New Catalyst System in Transesterification of Palm Olein: Tolerance of Water and Free Fatty Acids. Energy Conversion and Management, 56 . pp. 46-52. ISSN 0196-8904

Gaanty Pragas, Maniam and Boey, Peng Lim and Shafida, Abd Hamid and Mohamed Hag Ali, Dafaalla (2012) Crab and Cockle Shells as Catalysts for the Preparation of Methyl Esters from Low Free Fatty Acid Chicken Fat. Journal of the American Oil Chemists' Society, 88 (Issue ). pp. 283-288. ISSN 0003-021X (Print), 1558-9331 (Online)

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan (2012) Rebuttal to the Arguments in the Letter to the Editor: Improvement May be Possible. Journal of the American Oil Chemists' Society, 89 (Issue ). pp. 737-740. ISSN 0003-021X (Print), 1558-9331 (Online)

Gupta, Ritu and Norrozila, Sulaiman and Beg, M. D. H. and Gupta, Arun (2012) An Enhanced Model for Prediction of Young Modulus of Composite. Procedia Technology, 1. pp. 303-307. ISSN 2212-0173

Gupta, Arun and Nuruldiyanah, Kamarudin and Chua, Gek Kee and R. M., Yunus (2012) Extraction of Keratin Protein from Chicken Feather. Journal of Chemistry and Chemical Engineering, 6 (8). pp. 732-737. ISSN 1934-7375

Gaanty Pragas, Maniam and Boey, Peng Lim and Shafida, Abd Hamid (2009) Biodiesel Production Via Transesterification of Palm Olein Using Waste Mud Crab (Scylla serrata) Shell as a Heterogeneous Catalyst. Bioresource Technology, 100 (Issue ). pp. 6362-6368. ISSN 0960-8524 (Print), 1873-2976 (Online)

Gaanty Pragas, Maniam and Boey, Peng Lim and Shafida, Abd Hamid (2009) Biodiesel from Adsorbed Waste Oil on Spent Bleaching Clay using CaO as a Heterogeneous Catalyst. European Journal of Scientific Research, 33 (2). pp. 347-357. ISSN ISSN 1450-216X

Gaanty Pragas, Maniam and Boey, Peng Lim and Shafida, Abd Hamid (2009) Utilization of Waste Crab Shell (Scylla serrata) as a Catalyst in Palm Olein Transesterification. Journal of Oleo Science, 58. pp. 499-502. ISSN 1347-3352 (Print), 1347-3352 (Online)

H

Hoseini, S. S. and G., Najafi and Ghobadian, B. and R., Mamat and Ebadi, M. T. and Yusaf, Talal (2019) Characterization of biodiesel production (ultrasonic-assisted) from evening-primroses (Oenothera lamarckiana) as novel feedstock and its effect on CI engine parameters. Renewable Energy, 130. pp. 50-60. ISSN 0960-1481

Hossain, Mohammed Anwar and Ayodele, Bamidele V. and Cheng, C. K. and Khan, Maksudur R. (2019) Optimization of renewable hydrogen-rich syngas production from catalytic reforming of greenhouse gases (CH4 and CO2) over calcium iron oxide supported nickel catalyst. Journal of the Energy Institute, 92 (1). pp. 177-194. ISSN 1743-9671

Hossain, S. K. Safdar and Saleem, Junaid and Rahman, SleemUr and Zaidi, Syed Mohammed Javaid and McKay, Gordon and Cheng, C. K. (2019) Synthesis and Evaluation of Copper-Supported Titanium Oxide Nanotubes as Electrocatalyst for the Electrochemical Reduction of Carbon Oxide to Organics. Catalysts, 9 (3). pp. 1-19. ISSN 2073-4344

H., Lago and Z., Zakaria and M. F., Jamlos and P. J., Soh (2019) A wideband reconfigurable folded planar dipole using MEMS and hybrid polymeric substrates. AEU - International Journal of Electronics and Communication, 99. pp. 347-353. ISSN 1434-8411

Hammid, Ali Thaeer and M. H., Sulaiman and Awad, Omar I. (2018) A robust firefly algorithm with backpropagation neural networks for solving hydrogeneration prediction. Electrical Engineering, 100 (4). pp. 2617-2633. ISSN 0948-7921 (Print); 1432-0487 (Online)

Hassan, Hasahudin and T., Senthil Kumar and Mohammad, Aslam (2018) Research On Life Long Learning. Research Journal of Commerce & Behavioural Science, 8 (2). pp. 14-21. ISSN 2251 1547

Hujainah, Fadhl and Rohani, Abu Bakar and Al-haimi, Basheer and Abdulgabber, Mansoor Abdullateef (2018) Investigation of stakeholder analysis in requirement prioritization techniques. Advanced Science Letters, 24 (10). pp. 7227-7231. ISSN 1936-6612

Hasan, Ali Muttaleb and Rassem, Taha H. and Noorhuzaimi, Mohd Noor (2018) Pattern-Matching Based for Arabic Question Answering: A Challenge Perspective. Advanced Science Letters, 24 (10). pp. 7655-7661. ISSN 1936-6612

Hammood, Omar A. and M. N. M., Kahar and Mohammed, Muamer N. and Hammood, Waleed A. and Junaida, Sulaiman (2018) The VANET-Solution Approach for Data Packet Forwarding Improvement. Advanced Science Letters, 24 (10). pp. 7423-7427. ISSN 1936-6612

Hasan, Mohammed M. and M., Ishak and M. R. M., Rejab (2018) Effect of pin tool flute radius on the material flow and tensile properties of dissimilar friction stir welded aluminum alloys. The International Journal of Advanced Manufacturing Technology, 98 (9-12). pp. 2747-2758. ISSN 0268-3768 (Print); 1433-3015 (Online)

Hasan, Raed Abdulkareem and Mostafa, A. Mohammed and Salih, Zeyad Hussein and M. A., Ameedeen and Tapus, Nicolae and Mohammed, Muamer N. (2018) HSO: A hybrid swarm optimization algorithm for reducing energy consumption in the cloudlets. Telkomnika, 16 (5). pp. 2144-2154. ISSN 1693-6930

Hammid, Ali Thaeer and M. H., Sulaiman (2018) Series division method based on PSO and FA to optimize Long-Term Hydro Generation Scheduling. Sustainable Energy Technologies and Assessments, 29 (2018). pp. 106-118. ISSN 2213-1388

Huq, A. K. M. Moyeenul and Wai, Lam K. and Rullah, Kamal and Mohd F. F., Mohd Aluwi and Stanslas, Johnson and Jamal, Jamia A. (2018) Oestrogenic activity of mimosine on MCF-7 breast cancer cell line through the ERα-mediated pathway. Chemical Biology & Drug Design. ISSN 1747-0285 (In Press)

Hussanan, Abid and Mohd Zuki, Salleh and Khan, Ilyas (2018) Microstructure and inertial characteristics of a magnetite ferrofluid over a stretching/shrinking sheet using effective thermal conductivity model. Journal of Molecular Liquids, 255 (2018). pp. 64-75. ISSN 0167-7322

Hussanan, Abid and Mohd Zuki, Salleh and Alkasasbeh, Hamzeh Taha and Khan, Ilyas (2018) MHD Flow and Heat Transfer in a Casson Fluid Over A Nonlinearly Stretching Sheet With Newtonian Heating. Heat Transfer Research, 49 (12). pp. 1185-1198. ISSN 1064-2285(Print); 2162-6561(Online)

Hashim, Yasir (2018) Optimization of Resistance Load in 4T-Static Random-Access Memory Cell Based on Silicon Nanowire Transistor. Journal of Nanoscience and Nanotechnology, 18 (2). pp. 1199-1201. ISSN 1533-4880 (Print); 1533-4899 (Online)

Hamzah, Ahmad and Nur Aqilah, Othman and Mohd Syakirin, Ramli (2018) A solution to partial observability in extended Kalman Filter mobile robot navigation. Telkomnika (Telecommunication Computing Electronics and Control), 16 (1). pp. 134-141. ISSN 1693-6930

Hoseini, S. S. and Najafi, G. and Ghobadian, B. and R., Mamat and Ebadi, M. T. and Yusaf, Talal (2018) Ailanthus altissima (tree of heaven) seed oil: Characterisation and optimisation of ultrasonication-assisted biodiesel production. Fuel, 220. pp. 621-630. ISSN 0016-2361

Hazrulzurina, Suhaimi and Abdul Adam, Abdullah and Mrwan, Anes G. and Zuhaira, Abdullah and Mohd. Fahmi, Othman and Mohd. Kamal, Kamaruzzaman and Hagos, F. Y. (2018) Analysis of combustion characteristics, engine performances and emissions of long-chain alcohol-diesel fuel blends. Fuel, 220. pp. 682-691. ISSN 0016-2361

Hazrulzurina, Suhaimi and Abdul Adam, Abdullah and Mrwan, Anes Abdulla G. and Zuhaira, Abdullah and Mohd. Fahmi, Othman and Mohd. Kamal, Kamaruzzaman and Hagos, F. Y. (2018) Analysis of combustion characteristics, engine performances and emissions of long-chain alcohol-diesel fuel blends. Fuel, 220. pp. 682-691. ISSN 0016-2361

Humaira, Abdul Latif and Mohd Rashid, Ab Hamid and Noor Azlinda, Zainal Abidin (2018) Awareness of diabetes mellitus among public attending the primary health centers in Malaysia. Journal of Quality Measurement and Analysis, 14 (2). pp. 11-23. ISSN 1823-5670

Hanh, Le Thi My and Irene, Wei Kiong Ting and Kweh, Qian Long and Hoanh, Lam Thi Hoang (2018) Board meeting frequency and financial performance: A case of listed firms in Vietnam. International Journal of Business and Society, 19 (2). pp. 464-472. ISSN 1511-6670

Hanh, Le Thi My and Irene, Wei Kiong Ting and Kweh, Qian Long and Hoanh, Lam Thi Hoang (2018) Board meeting frequency and financial performance: a case of listed firms in vietnam. International Journal of Business and Society, 19 (2). pp. 464-472. ISSN 1511-6670

Hoang, A. T. and M. M., Noor and Pham, X. D. (2018) Comparative analysis on performance and emission characteristic of diesel engine fueled with heated coconut oil and diesel fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (1). pp. 5110-5125. ISSN 2180-1606

Hasan, Raed Abdulkareem and Mohammed, Muamer N. and M. A., Ameedeen and Khalaf, Emad Taha (2018) Dynamic Load Balancing Model Based on Server Status (DLBS) for Green Computing. Advanced Science Letters, 24 (10). pp. 7777-7782. ISSN 1936-6612

Hammood, Omar A. and M. N. M., Kahar and Mohammed, Muamer N. and Hammood, Waleed A. and Ayoob, Ayoob A. (2018) Enhance video quality through VANET based on Transmit Packet Coding (TPC). Journal of Advanced Manufacturing Technology. pp. 1-10. ISSN 2289-8107 (In Press)

Harilal, Midhun and Krishnan, Syam G. and Pal, Bhupender and Reddy, M. Venkatashamy and Mohd Hasbi, Ab. Rahim and M. M., Yusoff and Rajan, Jose (2018) Environment-modulated crystallization of Cu2O and CuO nanowires by electrospinning and their charge storage properties. Langmuir, 34 (5). pp. 1873-1882. ISSN 0743-7463

Hoseini, S. S. and G., Najafi and Ghobadian, Barat and Yusaf, Talal and R., Mamat (2018) Experimental and numerical analysis of flow and heat transfer characteristics of EGR cooler in diesel engine. Applied Thermal Engineering, 140. pp. 745-758. ISSN 1359-4311

Huei, Ruey Ong and Chee, Wai Woon and Muhammad Sheraz, Ahmad and Yousuf, Abu and Cheng, C. K. and Khan, Maksudur R. (2018) Facile Synthesis of PVP-MnO2/CNT Composites as ORR Electrocatalyst for an Air-Cathode Microbial Fuel Cell. International Journal of Electrochemical Science, 13. pp. 7789-7799. ISSN 1452-3981

Huei, Ruey Ong and Khan, Maksudur R. and Ridzuan, Ramli and R. M., Yunus and Rahman, Md. Wasikur and Chi, Shein Hong and Muhammad Sheraz, Ahmad (2018) Formation of CuO Nanoparticle in Glycerol and Its Catalytic Activity for Alkyd Resin Synthesis. Materials Today: Proceedings, 5 (1 Part 3). pp. 3165-3175. ISSN 2214-7853

Habeeb, Omar Abed and K., Ramesh and Ali, Gomaa A. M. and Sethupathi, Sumathi and R. M., Yunus (2018) Hydrogen sulfide emission sources, regulations, and removal techniques: a review. Reviews in Chemical Engineering, 34 (6). pp. 837-854. ISSN 2191-0235

Hannis Ansah, R. and Osei, Jane and Sorooshian, Shahryar and Aikhuele, Daniel Osezua (2018) Importance of employer-employee relationship towards the growth of a business. Quality - Access to Success, 19 (166). pp. 42-49. ISSN 1582-2559

Homaid, Ameen A. Ba and Alsewari, Abdulrahman A. and Alazzawi, Ammar K. and Kamal Z., Zamli (2018) A Kidney Algorithm for Pairwise Test Suite Generation. Advanced Science Letters, 24 (10). pp. 7284-7289. ISSN 1936-6612

Hidayah, N. N. and Nurihan, M. F. S. and Sumaiya, Zainal Abidin (2018) Liquid-liquid extraction of cerium using synergist extractant. Journal of Mechanical Engineering and Sciences (JMES) , 12 (1). pp. 3302-3312. ISSN 2289-4659 (print); 2231-8380 (online)

Humada, Ali Mahmood and Aaref, Ashty M. and Hamada, Hussein M. and M. H., Sulaiman and Amin, Nowshad and Mekhilef, Saad (2018) Modeling and Characterization of a Grid-Connected Photovoltaic System under Tropical Climate Conditions. Renewable and Sustainable Energy Reviews, 83 (Part 3). pp. 2094-2105. ISSN 1364-0321

Hoseini, S. S. and Najafi, G. and Ghobadian, B. and R., Mamat and Ebadi, M. T. and Yusaf, Talal (2018) Novel environmentally friendly fuel: the effects of nanographene oxide additives on the performance and emission characteristics of diesel engines fuelled with Ailanthus altissima biodiesel. Renewable Energy, 125. pp. 283-294. ISSN 0960-1481

Hussein, Adnan M. and Lingenthiran, Samylingam and K., Kadirgama and M. M., Noor and Aik, L. K. (2018) Palm oil based nanofluids for enhancing heat transfer and rheological properties. Heat and Mass Transfer, 54 (10). pp. 3163-3169. ISSN 0947-7411 (Print); 1432-1181 (Online)

Hyder, Farhan and Baredar, Prashant and Sudhakar, K. and R., Mamat (2018) Performance and land footprint analysis of a solar photovoltaic tree. Journal of Cleaner Production, 187. pp. 432-448. ISSN 1879-1786

Hammid, Ali Thaeer and M. H., Sulaiman and Abdalla, Ahmed N. (2018) Prediction of small hydropower plant power production in Himreen Lake dam (HLD) using artificial neural network. Alexandria Engineering Journal, 57 (1). pp. 211-221. ISSN 1110-0168

Hammood, Omar A. and M. N. M., Kahar and Mohammed, Muamer N. (2018) RElay Suitability-based Routing Protocol (RESP) for Video Streaming in Vehicular Ad Hoc Networks. International Journal of Computers Communications & Control. pp. 1-17. ISSN 1841-9836 (In Press)

Hujainah, Fadhl and Rohani, Abu Bakar and Abdulgabber, Mansoor Abdullateef and Kamal Z., Zamli (2018) Software Requirements Prioritisation: A Systematic Literature Review on Significance, Stakeholders, Techniques and Challenges. IEEE Access, 6. pp. 71497-71523. ISSN 2169-3536

Hyder, Farhan and K., Sudhakar and R., Mamat (2018) Solar PV Tree Design: A Review. Renewable and Sustainable Energy Reviews, 82 (Part 1). pp. 1079-1096. ISSN 1364-0321

Hujainah, Fadhl and Rohani, Abu Bakar and Al-haimi, Basheer and Abdulgabber, Mansoor Abdullateef (2018) Stakeholder quantification and prioritisation research: A systematic literature review. Information and Software Technology, 102. pp. 85-99. ISSN 0950-5849

Hossain, M. Anwar and Ayodele, Bamidele V. and Cheng, C. K. and Khan, Maksudur R. (2018) Syngas Production from Catalytic CO2 Reforming of CH4 over CaFe2O4 Supported Ni and Co Catalysts: Full Factorial Design Screening. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (1). pp. 57-73. ISSN 1978-2993

Husain, Mohamed Saad Bala and Gupta, Arun and Alashwal, Basma Yahya and Sharma, Swati (2018) Synthesis of PVA/PVP based hydrogel for biomedical applications: a review. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 40 (20). pp. 2388-2393. ISSN 1556-7036 (Print); 1556-7230 (Online)

Hasan, Alsidqi and Ting, Wee Kiet and Fauzan, Sahdi and Siti Noor Linda, Taib and Norsuzailina, Mohamed Sutan and Badhrulhisham, Abdul Aziz and Fourie, Andy (2018) Temperature change and the total stress anomaly in paste backfill. International Journal of GEOMATE, 14 (44). pp. 90-95. ISSN 2186-2990

Hazrulrizawati, Hamid and Aizi Nor Mazila, Ramli and Normaiza, Z. and M. M., Yusoff (2018) UPLC-QTOF/MS-based phenolic profiling of Melastomaceae, their antioxidant activity and cytotoxic effects against human breast cancer cell MDA-MB-231. Food Chemistry, 265. pp. 253-259. ISSN 0308-8146

Hussanan, Abid and Sidra, Aman and Zulkhibri, Ismail and Mohd Zuki, Salleh and Widodo, Basuki (2018) Unsteady Natural Convection of Sodium Alginate Viscoplastic Casson Based Based Nanofluid Flow over a Vertical Plate with Leading Edge Accretion/Ablation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 92-98. ISSN 2289-7879

Hong, Chi Shein and Lau Cindy, Chin Yee and Leong, Chun Yi and Chua, Gek Kee and Chin, S. Y. (2018) A comparison of entrapped and covalently bonded laccase: Study of its leakage, reusability, and the catalytic efficiency in TEMPO-mediated glycerol oxidation. Biocatalysis and Biotransformation, 36 (5). pp. 352-361. ISSN 1024-2422 (Print); 1029-2446 (Online)

HadiAlnashia, Ilham A. and Izzeldin, I. Mohd and Almelian, Mohamad Milood and Omran, Mohamed Asghaiyer (2018) The impact of partial discharge on the dielectric properties of refined bleached and deodorized palm oil (RBDPO). Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-3). pp. 81-85. ISSN 2180-1843 (Print); 2289-8131 (Online)

Hamada, Hussein M. and Jokhio, Gul A. and Fadzil, Mat Yahaya and Humada, Ali M. and Gul, Yasmeen (2018) The present state of the use of palm oil fuel ash (POFA) in concrete. Construction and Building Materials, 175. pp. 26-40. ISSN 0950-0618

Hanida, Abdul Aziz and Azmi, Mohd Shariff (2017) A Journey of Process Safety Management Program for Process Industry. International Journal of Engineering Technology And Sciences (IJETS), 8 (1). pp. 1-9. ISSN 2289-697X

Hiew, Ming Yu and Gupta, Arun and Gupta, Ritu and Husain, Muhamed Saad Bala (2017) Investigation of Bioplastic Properties Developed from Acrylate Epoxidized Soybean Oil Through Ring Opening Polymerization Process. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 1 (1). pp. 29-41. ISSN 0126-8139

Hanafi, M. Yusop and M. F., Ghazali and Mohd Fadhlan, Mohd Yusof and Wan Sofian, Wan Hamat (2017) Development of intelligent leak detection system based on artificial pressure transient signal using integrated Kurtosis-based Algorithm for Z-filter Technique (I-Kaz). Journal of Mechanical Engineering, 4 (4). pp. 84-102. ISSN 1823-5514 (Print); 2550-164X (Online)

Harilal, Midhun and Krishnan, Syam G. and Yar, Asfand and Izan Izwan, Misnon and Reddy, M. Venkatashamy and M. M., Yusoff and Dennis, John Ojur and Rajan, Jose (2017) Pseudocapacitive Charge Storage in Single-Step-Synthesized CoO-MnO2-MnCo2O4 Hybrid Nanowires in Aqueous Alkaline Electrolytes. Journal of Physical Chemistry C, 121 (39). pp. 21171-21183. ISSN 1932-7447 (print); 1932-7455 (online)

H. Sovester, H and M. I., Adiyanto (2017) Seismic Performance Of Reinforced Concrete School Buildings In Sabah. International Journal of Civil Engineering and Geo-Environmental, Sp. (NCWE). pp. 148-152. ISSN 2180-2742

Hazim, Sharudin and Nik Rosli, Abdullah and M. N. A. M., Yusof and H. H., Masjuki and Ali, Obed Majeed (2017) Investigation of the emission characteristics of iso-butanol additives on methanol-gasoline blends using spark ignition engine. Journal of Mechanical Engineering, S4 (1). pp. 93-106. ISSN 1823-5514 (Print); 2550-164X (Online) (Unpublished)

Habeeb, Omar Abed and K., Ramesh and Ali, Gomaa A. M. and R. M., Yunus (2017) Low-cost and eco-friendly activated carbon from modified palm kernel shell for hydrogen sulfide removal from wastewater: adsorption and kinetic studies. Desalination and Water Treatment, 84. pp. 205-214. ISSN 1944-3986

Hanisah, Kasbon and Siti Zurainiwati, Abdul Kadir (2017) Factors of Committing Academic Dishonesty among Students in a Malaysian Public University. The International Journal of Humanities & Social Studies (IJHSS), 5 (4). 275-279 . ISSN 2321-9203

Harilal, Midhun and Syam, G. Krishnan and Lathakumary Vijayan, Binci and M., Venkatashamy Reddy and Adams, Stefan and Barron, Andrew R. and M. M., Yusoff and Rajan, Jose (2017) Continuous Nanobelts of Nickel Oxide-Cobalt Oxide Hybrid With Improved Capacitive Charge Storage Properties. Materials & Design, 122. pp. 376-384. ISSN 0264-1275

Harilal, Midhun Harilal and Krishnan, Syam G. and Vijayan, Bincy Lathakumary and M. M., Yusoff and Rajan, Jose and Reddy, M. Venkatashamy and Adams, Stefan and Barron, Andrew R. (2017) Continuous Nanobelts of Nickel Oxide–Cobalt Oxide Hybrid With Improved Capacitive Charge Storage Properties. Materials and Design, 122. pp. 376-384. ISSN 0264-1275

Harilal, Midhun and Baiju, Vidyadharan and Izan Izwan, Misnon and Anilkumar, Gopinathan M. and Lowe, Adrian and Jamil, Ismail and M. M., Yusoff and Rajan, Jose (2017) One-Dimensional Assembly of Conductive and Capacitive Metal Oxide Electrodes for High-Performance Asymmetric Supercapacitors. ACS Applied Materials and Interfaces, 9 (12). pp. 10730-10742. ISSN 1944-8244 (print); 1944-8252 (online)

Hashim, Yasir (2017) A New Approach for Dimensional Optimization of Inverters in 6T-Static Random-Access Memory Cell Based on Silicon Nanowire Transistor. Journal of Nanoscience and Nanotechnology, 17 (2). pp. 1061-1067. ISSN 1533-4880 (Print); 1533-4899 (Online)

Hussanan, Abid and Mohd Zuki, Salleh and Khan, Ilyas and Razman, Mat Tahar (2017) Heat Transfer in Magnetohydrodynamic Flow of a Casson Fluid with Porous Medium and Newtonian Heating. Journal of Nanofluids, 6. pp. 1-10. ISSN 2169-432X (Print); 2169-4338 (Online)

Hilmi, Amiruddin and Wan Mohd Faizal, Wan Mahmood and Shahrir, Abdullah and Mohd Radzi, Abu Mansor and R., Mamat and Azri, Alias (2017) Application of Taguchi Method in optimization of design darameter for turbocharger vaned diffuser. Industrial Lubrication and Tribology, 69 (3). pp. 409-413. ISSN 0036-8792

H., Lago and Mohd Faizal, Jamlos and Ping, Jack Soh and M. H., Muslim and Vandenbosch, Guy A. E. and Narbudowicz, Adam (2017) Bandwidth Enhancement of an Array Antenna using Slotted Artificial Magnetic Conductors. Applied Physics A, 123 (53). pp. 1-5. ISSN 0947-8396(Print); 1432-0630 (Online)

Hamidreza , Sadegh and Ali, Gomaa A. M. and Zeynab , Abbasi and Mallikarjuna , N. Nadagouda (2017) Adsorption Of Ammonium Ions Onto Multi-Walled Carbon Nanotubes. Studia Universitatis Babes-Bolyai, Chemia, 62 (2). pp. 233-245. ISSN 1224-7154

Hanida, Abdul Aziz and Mohamad Rizza, Othman and Azmi, Mohd Shariff and Tan, Lian See (2017) Application of Analytical Hierarchy Process (AHP) in Prioritizing HAZOP Analysis for Pilot Plant. Chemical Engineering Research Bulletin, 19 (Special). pp. 87-95. ISSN 0379-7678 (Print); 2072-9510 (Online)

Habeeb, Omar Abed and K., Ramesh and Ali, Gomaa A. M. and R. M., Yunus (2017) Application of Response Surface Methodology for Optimization of Palm Kernel Shell Activated Carbon Preparation Factors for Removal of H2S from Industrial Wastewater. Jurnal Teknologi (Sciences and Engineering), 79 (7). pp. 1-10. ISSN 0127-9696 (print); 2180-3722 (online)

Hilmi, Amiruddin and Wan Mohd Faizal, Wan Mahmood and Shahrir, Abdullah and Mohd Radzi, Abu Mansor and R., Mamat and Azri, Alias (2017) Application of Taguchi method in optimization of design parameter for turbocharger vaned diffuser. Industrial Lubrication and Tribology, 69 (3). pp. 409-413. ISSN 0036-8792

Hujainah, Fadhl and Al-haimi, Basheer and Nasser, Abdullah B. and Hujainah, Amira and Al-Bashiri, Hael (2017) Applying Architectural Analysis for Current Software Systems: A Case Study of KFC and Pizza Hut Online Food Ordering Systems in Malaysia. Advanced Science Letters, 23 (9). pp. 9145-9151. ISSN 1936-6612

Hamidah, Abdullah and Nur Aminatulmimi, Ismail and Zahira, Yaakob and Khan, Maksudur R. and Syarifah, Abd Rahim (2017) CeO2-TiO2 for Photoreduction Of CO2 To Methanol Under Visible Light: Effect Of Ceria Loading. Malaysian Journal of Analytical Sciences, 21 (1). pp. 166-172. ISSN 1394-2506

Hazrulrizawati, Hamid and Roziasyahira, Mutazah and M. M., Yusoff and Nurul Ashikin, Abd Karim and Ahmad Faizal, Abdull Razis (2017) Comparative Analysis of Antioxidant and Antiproliferative Activities of Rhodomyrtus Tomentosa Extracts Prepared with Various Solvents. Food and Chemical Toxicology, 108 (Pt. B). pp. 451-457. ISSN 0278-6915

Hazrulrizawati, Hamid and Suria, Kupan and M. M., Yusoff (2017) Dihydroactinidiolide from thermal degradation of β-carotene. International Journal of Food Properties, 20 (3). pp. 674-680. ISSN 1094-2912 (Print); 1532-2386 (Online)

Hagos, F. Y. and Obed M., Ali and R., Mamat and Abdul Adam, Abdullah (2017) Effect Of Emulsification And Blending On The Oxygenation And Substitution Of Diesel Fuel For Compression Ignition Engine. Renewable and Sustainable Energy Reviews, 75. pp. 1281-1294. ISSN 1364-0321

Hoseini, S. S. and G., Najafi and Ghobadian, B. and R., Mamat and Nor Azwadi, Che Sidik and Azmi, W. H. (2017) The Effect of Combustion Management on Diesel Engine Emissions Fueled with Biodiesel-Diesel Blends. Renewable and Sustainable Energy Reviews, 73. pp. 307-331. ISSN 1364-0321

Hagos, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman and Firmansyah, F. and R., Mamat (2017) Effect of Fuel Injection Timing of Hydrogen Rich Syngas Augmented With Methane in Direct-Injection Spark-Ignition Engine. International Journal of Hydrogen Energy, 42 (37). pp. 23846-23855. ISSN 0360-3199

Hoseini, S.S. and Najafi, G. and Ghobadian, B. and Rahimi, A. and Yusaf, Talal and R., Mamat and N. A. C., Sidik and Azmi, W. H. (2017) Effects of Biodiesel Fuel Obtained from Salvia Macrosiphon Oil (Ultrasonic-Assisted) On Performance and Emissions of Diesel Engine. Energy, 131. pp. 289-296. ISSN 0360-5442(print); 1873-6785(online)

Habeeb, Omar Abed and K., Ramesh and Ali, Gomaa A. M. and R. M., Yunus (2017) Experimental Design Technique on Removal of Hydrogen Sulfide using CaO-eggshells Dispersed onto Palm Kernel Shell Activated Carbon: Experiment, Optimization, Equilibrium and Kinetic Studies. Journal of Wuhan University of Technology-Mater. Sci. Ed., 32 (2). pp. 305-320. ISSN 1000-2413 (Print); 1993-0437 (Online)

Hassan Abdulrssoul, Abdulhadi and S. N., Aqida and M., Ishak and I., Ismail and Ghusoon, Ridha Mohammed (2017) Experimental Investigation of Thermal Fatigue Die Casting Dies by Using Response Surface Modelling. Metals, 7 (6). pp. 1-13. ISSN 2075-4701

Hyreil A., Kasdirin and N. M., Yahya and M. S. M., Aras and Tokhi, M. O. (2017) Hybridizing Invasive Weed Optimization with Firefly Algorithm for Unconstrained and Constrained Optimization Problems. Journal of Theoretical and Applied Information Technology, 95 (4). pp. 912-927. ISSN 1992-8645 (print); 817-3195 (online)

Hanafi, M. Yusop and M. F., Ghazali and M. F. M., Yusof and Wan Sofian, Wan Hamat (2017) Improvement of Cepstrum Analysis for the Purpose to Detect Leak, Feature and Its Location in Water Distribution System based on Pressure Transient Analysis. Journal of Mechanical Engineering, SI 4 (4). pp. 102-122. ISSN 1823-5514

Hazrulrizawati, Hamid and Aizi Nor Mazila, Ramli and M. M., Yusoff (2017) Indole Alkaloids from Plants as Potential Leads for Antidepressant Drugs: A Mini Review. Frontiers in Pharmacology, 8 (96). pp. 1-7. ISSN 1663-9812

Hazim, Sharudin and Nik Rosli, Abdullah and G., Najafi and R., Mamat and H. H., Masjuki (2017) Investigation of The Effects of Iso-Butanol Additives on Spark Ignition Engine Fuelled with Methanol-Gasoline Blends. Applied Thermal Engineering, 114. pp. 593-600. ISSN 1359-4311

Habeeb, Omar Abed and K., Ramesh and Ali, Gomaa A. M. and R. M., Yunus (2017) Isothermal Modelling Based Experimental Study of Dissolved Hydrogen Sulfide Adsorption from Waste Water using Eggshell Based Activated Carbon. Malaysian Journal of Analytical Sciences, 21 (2). pp. 334-345. ISSN 1394-2506

Hammood, Omar A. and M. N. M., Kahar and Mohammed, Muamer N. and Hammood, Waleed A. (2017) Issues and Challenges of Video Dissemination in VANET and Routing Protocol: Review. Journal of Engineering and Applied Sciences, 12 (11 S. I.). pp. 9266-9277. ISSN 1816-949x (Print); 1818-7803 (Online)

Habeeb, Omar Abed and K., Ramesh and Ali, Gomaa A. M. and R. M., Yunus and Olalere, Olusegun Abayomi (2017) Kinetic, Isotherm And Equilibrium Study Of Adsorption Of Hydrogen Sulfide From Wastewater Using Modified Eggshells. IIUM Engineering Journal, 18 (1). pp. 13-25. ISSN 2289-7860

Haque, Muhammad E. and R. A., Bakar and Gan, Leong Ming and Shakaib, M. (2017) Modeling of Temperature and Aifflow Pattern In a Refrigerator. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3054-3060. ISSN 1819-6608

Hamidah, Abdullah and Khan, Maksudur R. and Huei, Ruey Ong and Zahira, Yaakob (2017) Modified TiO2 Photocatalyst for CO2 Photocatalytic Reduction: An overview. Journal of CO2 Utilization, 22. pp. 15-32. ISSN 2212-9820

Habeeb, Omar Abed and K., Ramesh and Ali, Gomaa A. M. and R. M., Yunus (2017) Optimization of Activated Carbon Synthesis using Response Surface Methodology to Enhance H2S Removal from Refinery Wastewater. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 1. pp. 1-17. ISSN 0126-8139

Hammid, Ali Thaeer and M. H., Sulaiman and Kadhim, Atheer A. (2017) Optimum Power Production of Small Hydropower Plant (SHP) Using Firefly Algorithm (FA) in Himreen Lake Dam (HLD), Eastern Iraq. Research Journal of Applied Sciences, 12 (10). pp. 455-466. ISSN 1815-932X

Hiew, Thong Yap and Ngien, S. K. and Norasman, Othman and Nadiatul Adilah, Ahmad Abdul Ghani and Norhan, Abd. Rahman (2017) Parametric Investigation in Malaysian Separate Sewer Systems. Proceedings of the Institution of Civil Engineers - Municipal Engineer, 170 (ME2). pp. 90-96. ISSN 0965-0903 (Print); 1751-7699 (Online)

Hin, Lee Lee and Fredolin, Tangang and Gisen, J. I. A. and Saim, Suratman (2017) Prediction of Salinity Intrusion in the Sheltered Estuary of Terengganu River in Malaysia using 1-D Empirical Intrusion Model. Acta Oceanologica Sinica, 36 (5). pp. 57-66. ISSN 0253-505X (Print) 1869-1099 (Online)

Hindryawati, Noor and Daniel, and Erwin, and Gaanty Pragas, Maniam (2017) Preparation of spent bleaching earth-supported calcium from limestone as catalyst in transesterification of waste frying oil. Jurnal Bahan Alam Terbarukan, 6 (1). pp. 68-75. ISSN 2303-0623

Hammid, Ali Thaeer and M. H., Sulaiman and Kadhim, Atheer A. and Kareem, Ali N. and Jadaa, Khalid J. (2017) Priority of Kaplan Turbine and Small Hydropower Plants Over Other Resources: An Overview. Journal of Engineering and Applied Sciences, 12 (9 SI). pp. 8695-8705. ISSN 1816-949x (Print); 1818-7803 (Online)

H. M., Mahmudul and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah and Wan Faizal, Wan Ishak and Alenezi, R. (2017) Production, Characterization and Performance of Biodiesel as an Alternative Fuel in Diesel Engines – A Review. Renewable and Sustainable Energy Reviews, 72. pp. 497-509. ISSN 1364-0321

Hui, Liang Khor and Liew, Siau-Chuin and Jasni, Mohamad Zain (2017) Region of Interest-Based Tamper Detection and Lossless Recovery Watermarking Scheme (ROI-DR) on Ultrasound Medical Images. Journal of Digital Imaging. pp. 1-22. ISSN 0897-1889

H., Termidi and Aainaa Izyan, Nafsun and Anwaruddin, Hisyam (2017) Responsible Mineral Resource Development: The Way Forward. Journal of Malaysian Critical Metals, 2. pp. 1-4. ISSN 0128-2557

Hazrulrizawati, Hamid and Zeyohannes, Senait Sileshi and M. M., Yusoff (2017) Rhodomyrtus Tomentosa: A Phytochemical and Pharmacological Review. Asian Journal of Pharmaceutical and Clinical Research, 10 (1). pp. 1-7. ISSN 0974-2441(print); 2455-3891(online)

Hendriyawan Achmad, M.S. and Priyandoko, Gigih and Rosmazi, Rosli and Mohd Razali, Daud (2017) Tele-operated mobile robot for 3D visual inspection utilizing distributed operating system platform. International Journal of Vehicle Structures & Systems, 9 (3). pp. 190-194. ISSN 0975-3060 (Print); 0975-3540 (Online)

Hussanan, Abid and Mohd Zuki, Salleh and Khan, Ilyas and Razman, Mat Tahar (2017) Unsteady Free Convection Flow of a Micropolar Fluid With Newtonian Heating: Closed Form Solution. Thermal Science, 21 (6 Part A). pp. 2313-2326. ISSN 2334-7163

Hasan, Raed Abdulkareem and Mohammed, Muamer N. (2017) A krill herd behaviour inspired load balancing of tasks in cloud computing. Studies in Informatics and Control, 26 (24). pp. 413-424. ISSN 220-1766

Hussam Alddin S., Ahmed and Mohammed Hasan, Ali and Laith M., Kadhum and Mohamad Fadli, Zolkipli and Yazan A., Alsariera (2017) A review of challenges and security risks of cloud computing. Journnal of Telecommunication Electronic and Computer Engineering, 9 (1-2). pp. 87-91. ISSN 2180-1843

Hadi, Manap and Mohd Rusllim, Mohamed and M. S., Najib (2016) Lower Detection Limit Enhancement for Low Concentration Ammonia Measurement. Sensors and Actuators B: Chemical, 243. pp. 882-887. ISSN 0925-4005

Hazrulrizawati, Hamid and Izzah Hayati, Yahaya and M. M., Yusoff and Seema, Zareen (2016) Bioassay-guided Isolation and Antioxidant Activity of Sulfur-containing Compounds from Clinacanthus nutans. Journal of the Chinese Chemical Society, 63 (12). pp. 1033-1037. ISSN 2192-6549

Hadi, Manap and Suzalina, Kamaruddin and M. S., Najib (2016) A Potential Development of Breathing Gas Sensor Using An Open Path Fibre Technique. Microelectronic Engineering, 164. pp. 59-62. ISSN 0167-9317

Hadi, Manap and Nor Mazlee, Norazmi and K., Suzalina and M. S., Najib (2016) An Open-Path Optical Fibre Sensor For Ammonia Measurement In The Ultra Violet Region. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10940-10943. ISSN 1819-6608

Hussain, Ahmad and Ali, Shahid and Iqbal, Ahmed and Jolius, Gimbun and Albeirutty, Muhammad H. and Rehan, Zulfiqar Ahmad (2016) Microwave Reinforced Transesterification of Rubber Seed Oil Using Waste Cement Clinker Catalyst. Current Nanoscience, 12 (5). pp. 576-585. ISSN 1573-4137 (Print); 1875-6786 (Online)

Hisyam, A. and Ismail, N. A. and Mohd Taib, M. K. A. and Shariff, S. (2016) Leaching Study Of Precious Metal Recovery From Ferric Permanent Magnet Waste. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9981-9984. ISSN 1819-6608

Hamed, Atyaf Khalid and Dewayanto, Nugroho and Du, Dongyu and Mohd Hasbi, Ab. Rahim and Mohd Ridzuan, Nordin (2016) Novel Modified ZSM-5 as an Efficient Adsorbent for Methylene Blue Removal. Journal of Environmental Chemical Engineering, 4 (3). pp. 2607-2616. ISSN 2213-3437

Hor, Chee Heng and Chew, Few Ne (2016) Determination of Green Fluorescent Protein by Ultraviolet-Excited Gel Imaging. Instrumentation Science and Technology, 44 (5). pp. 558-565. ISSN 1525-6030

Hong, Pui Khoon and Ndagijimana, Maurice and Betti, Mirko (2016) Glucosamine-induced glycation of hydrolysed meat proteins in the presence or absence of transglutaminase: Chemical modifications and taste-enhancing activity. Food Chemistry, 197. pp. 1143-1152. ISSN 03088146

Hamed, Atyaf Khalid and Mohd Hasbi, Ab. Rahim and Dewayanto, Nugroho and Du, Dongyu and Mohd Ridzuan, Nordin (2016) Kinetic and Thermodynamics of Methylene Blue Adsorption onto Zero Valent Iron Supported on Mesoporous Silica. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 250-261. ISSN 1978-2993

Hussain, H. and Mohd Razelan, Intan Suhana and Law, T. H. and Ahmad Farhan, M. S. (2016) Development of Composite Road Environment Safety Index. Journal of Transportation Safety & Security, 8 (1). pp. 1-17. ISSN 1943-9962 (Print) 1943-9970 (Online)

Hujainah, Fadhl and Rohani, Abu Bakar and Al-Haimi , Basheer and Abdullah, Nasser (2016) Analyzing requirement prioritization techniques based on the used aspects. Research Journal of Applied Sciences, 11 (6). pp. 327-332. ISSN 1815-932X

Hana, Marican and Raihana Z., Edros and Mahadi, Mohammad and Sazlina, Salleh (2016) Antimicrobial Activity of Tropical Soft Corals Found in the Northern Straits of Malacca. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 1-10. ISSN 2289-697X

Hossain, M. Anwar and Ayodele, Bamidele V. and Cheng, C. K. and Khan, Maksudur R. (2016) Artificial Neural Network Modeling of Hydrogen-rich Syngas Production from Methane Dry Reforming over Novel Ni/CaFe2O4 Catalysts. International Journal of Hydrogen Energy, 41 (26). pp. 11119-11130. ISSN 0360-3199

Hasnah, Haron and Ishak, Ismail and Yuvaraj, Ganesan and Zulhalwati, Hamzah (2016) Audit Exemption for Small and Medium Enterprises: Perceptions of Malaysian Auditors. Asian Academy of Management Journal, 21 (2). pp. 153-182. ISSN 1394-2603 (print); 2180-4184 (online)

Hazrulrizawati, Hamid and Izzah Hayati, Yahaya (2016) Cytotoxicity of Clinacanthus Nutans Extracts on Human Hepatoma (HepG2) Cell Line. International Journal of Pharmacy and Pharmaceutical Sciences, 8 (10). pp. 293-295. ISSN 0975–1491

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Deposition of Electroless Nickel Boron as Printed Circuit Board Surface Finish. Advanced Materials Research, 1133. pp. 391-395. ISSN 1022-6680 (print), 1662-8985 (online)

Hadi, Manap (2016) Design and Analysis of A Double Guided Roller for a Jigsaw. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7221-7224. ISSN 1819-6608

Husniah, Sahamid (2016) Developing critical thinking through Socratic Questioning: An Action Research Study. International Journal of Education & Literacy Studies (IJELS), 4 (3). pp. 62-72. ISSN 2202-9478

Hagos, F. Y. and Abd Rashid, A. Aziz and Shaharin, A. Sulaiman (2016) Effect of Injection Timing on Combustion, Performance and Emissions of Lean-burn Syngas (H2/CO) in Spark-Ignition Direct-Injection Engine. International Journal of Engine Research, 17 (9). pp. 921-933. ISSN 1468-0874 (print); 2041-3149 (online)

Hasan, Ahmad and Aini, Ahmad (2016) Establishing Halal Lifestyle Term in Clothing: Guideline and Guidance from Islamic Viewpoint. International Journal of Humanities Technology and Civilization (IJHTC), 1. pp. 67-72. ISSN 2289-7216

Huei, Ruey Ong and Khan, Maksudur R. and Ridzuan, Ramli and R. M., Yunus and Rahman, Md. Wasikur (2016) Glycerolysis of Palm Oil Using Copper Oxide Nanoparticles Combined With Homogeneous Base Catalyst. New Journal of Chemistry. ISSN 1144-0546

H. M., Mahmudul and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah (2016) Impact of Oxygenated Additives to Diesel-Biodiesel Blends in the Context of Performance and Emissions Characteristics of a CI Engine. IOP Conference Series: Materials Science and Engineering, 160 (1). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Influence of Second Reflow on the Intermetallic Compound Growth with Different Surface Finish. Key Engineering Materials, 701. pp. 127-131. ISSN 1013-9826 (print); 1662-9795 (online)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Intermetallic Growth and Shear Strength of SAC305/EN-Boron. Soldering & Surface Mount Technology, 28 (3). pp. 141-148. ISSN 0954-0911

Hamat, A. Malik and M. F., Ghazali and Amin, Makeen and Fatihah, Adnan (2016) Irregularity detection in artificial signal using time-frequency analysis. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3593-3597. ISSN 1819-6608

Hammid, Ali Thaeer and Hojabri, Mojgan and M. H., Sulaiman and Abdalla, Ahmed N. and Kadhim, Atheer A. (2016) Load Frequency Control for Hydropower Plants using PID Controller. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 8 (10). pp. 47-51. ISSN 2180-1843

Habeeb, Omar Abed and K., Ramesh and Ali, Gomaa A. M. and M. Y. M., Yunus and Thanusha, T. K. and Olalere, Olusegun Abayomi (2016) Modeling and Optimization For H2s Adsorption From Wastewater Using Coconut Shell Based Activated Carbon. Australian Journal of Basic and Applied Sciences, 10 (17 Sp.). pp. 136-147. ISSN 1991-8178

Hujainah, Fadhl and Halina, Dahlan and Al-haimi, Basheer and Hujainah, Ammar and Al-Bashiri, Hael and Abdulgabber, Mansoor Abdullateef (2016) New usability guidelines with implementation ways of mobile learning application based on mobile learning usability attributes. Indian Journal of Science and Technology, 9 (37). pp. 1-10. ISSN 0974-6846 (Print); 0974-5645 (Online)

Hamada, Khalaf I. and M. M., Rahman and D., Ramasamy and M. M., Noor and K., Kadirgama (2016) Numerical Investigation of In-Cylinder Flow Characteristics of Hydrogen-Fuelled Internal Combustion Engine. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1792-1802. ISSN 2289-4659 (print); 2231-8380 (online)

Humada, Ali Mahmood and Hojabri, Mojgan and Hamada, Hussein M. and Fahmi, Samsuri and Ahmed, Mushtaq N. (2016) Performance Evaluation of Two PV Technologies (c-Si and CIS) for Building Integrated Photovoltaic based on Tropical Climate Condition: A Case Study in Malaysia. Energy and Buildings, 119 (May). pp. 233-241. ISSN 0378-7788

Haque, Muhammad E. and R. A., Bakar and K., Kadirgama and M. M., Noor and Shakaib, M. (2016) Performance of a Domestic Refrigerator Using Nanoparticles-Based Polyolester Oil Lubricant. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1778-1791. ISSN 2289-4659

Humada, Ali M. and Hojabri, Mojgan (2016) Photovoltaic Grid-Connected Modeling and Characterization Based on Experimental Results. PLoS ONE, 11 (4). pp. 1-13. ISSN 1932-6203

Haque, Muhammad E. and R. A., Bakar and Gan, Leong Ming and Shakaib, M. (2016) Predicting Airflow and Temperature Pattern Inside A Refrigerator Through CFD. ARPN Journal of Engineering and Applied Sciences, 11 (14). 8621 -8628. ISSN 1819-6608

Hussanan, Abid and Khan, Ilyas and Mohd Zuki, Salleh and Sharidan, Shafie (2016) Slip Effects on Unsteady Free Convective Heat and Mass Transfer Flow with Newtonian Heating. Thermal Science, 20 (6). pp. 1939-1852. ISSN 0354-9836(Print); 2334-7163(Online)

Humada, Ali Mahmood and Hojabri, Mojgan and Mekhilef, Saad and Hamada, Hussein M. (2016) Solar Cell Parameters Extraction Based on Single and Double-Diode Models: A Review. Renewable and Sustainable Energy Reviews, 56. pp. 494-509. ISSN 1364-0321

Huei, Ruey Ong and Hegde, Gurumurthy and Vladimir, G. Chigrinov and Khan, Maksudur R. (2016) Sulfuric Disazo Dye Stabilized Copper Nanoparticle Composite Mixture: Synthesis and Characterization. RSC Advances, 6 (18). pp. 15094-15100. ISSN 2046-2069

Husniah, Sahamid and Nor Ashikin, Abdul Aziz and Nor, Syaheeda (2016) Teachers Use of Questioning in the ESL Classroom: Questioning as a Teaching Strategy. Journal of Global Academic Institute Education & Social Sciences, 2 (3). pp. 20-25. ISSN 2375-9577 (Online)

Hasmadi, Hassan (2016) Teaching and Learning in Industry: How Dominant is the Workers' Attitude in Predicting E-training Readiness? International Journal of Humanities Technology and Civilization (IJHTC), 1. pp. 73-81. ISSN 2289-7216

Herwansyah, Lago and Ping, Jack Soh and Mohd Faizal, Jamlos and Nursuriati, Shohaimi and Sen, Yan and Vandenbosch, Guy A. E. (2016) Textile Antenna Integrated with Compact AMC and Parasitic Elements for WLAN/WBAN Applications. Applied Physics A, 122 (1059). pp. 1-6. ISSN 0947-8396 (Print); 1432-0630 (Online)

Hasany, S. F. and Nour, A. H. and Sunarti, Abd Rahman (2016) Wet Chemical Approach for Vanadium Doped Maghemite (Fe2-xVxO3) Nanocrystals. Current Nanoscience, 12 (5). pp. 617-620. ISSN 1573-4137 (Print); 1875-6786 (Online)

Hasnah, Haron and Ishak, Ismail and Aw, Lo Na (2015) The Effect of Moral Reasoning, Exposure to Ethics and Perceived Ethical Climate on Ethical Judgement of Auditors in Malaysia. Asian Journal of Business and Accounting, 8 (2). pp. 25-65. ISSN 1985-4064

Hamzah, Ahmad and Nur Aqilah, Othman (2015) The Impact of Cross-Correlation on Mobile Robot Localization. International Journal of Control, Automation and Systems, 13 (5). pp. 1251-1261. ISSN 1598-6446

Hussanan, Abid and Mohd Zuki, Salleh and Khan, Ilyas and Razman, Mat Tahar and Zulkhibri, Ismail (2015) Soret Effects on Unsteady Magnetohydrodynamic Mixed-convection Heat-and-mass-transfer Flow in a Porous Medium with Newtonian Heating. Maejo International Journal of Science and Technology, 9 (02). pp. 224-245. ISSN 1905-7873

Hossain, Mokarram and Amin, A. F. M. S. and M. Nomani, Kabir (2015) Eight-Chain and Full-Network Models and Their Modified Versions for Rubber Hyperelasticity: A Comparative Study. Journal of the Mechanical Behavior of Materials, 24 (1-2). pp. 11-24. ISSN 0334-8938

Hegde, Gurumurthy and A. R., Yuvaraj and Wan, Sinn Yam and Tze, Nee Chan and Yit, Peng Goh (2015) New Para-substituted Non-symmetric Isoflavones for Their Fast Photo-switching Ability: Synthesis and Their Liquid Crystal Characterization. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 135. pp. 1115-1122. ISSN 1386-1425 (print); 1873-3557 (online)

Hafizoah, Kassim and Najah, Osman and Aziman, Abdullah (2015) Creative Strategy: A Pilot Evaluation of a Hypothetical Learning Model Through Public Speaking Performance. Procedia Social and Behavioral Sciences, 171 (2015). pp. 919-928. ISSN 1877-0428 (print); 1877-0428 (online)

Hiew, Thong yap and Ngien, S. K. (2015) Analysis of Flow Characteristics in Sewerage System. Applied Mechanics and Materials, 802. pp. 599-604. ISSN 1662-7482

Hong, Mee Song and M. H., Sulaiman and Mohd Rusllim, Mohamed (2015) An Application of Flower Pollination Algorithm to Solve Combined Economic Emission Dispatch by Considering Valve-point Loading Effect. International Review on Modelling and Simulations (I.R.E.M.O.S), 8 (4). pp. 427-435. ISSN 1974-9821

Hegde, Gurumurthy and Shoriya Aruni, Abdul Manaf and Kumar, Anuj and Ali, Gomaa A. M. and K. F., Chong and Zainab, Ngaini and K. V., Sharma (2015) Biowaste Sago Bark Based Catalyst Free Carbon Nanospheres: Waste to Wealth Approach. ACS Sustainable Chemistry & Engineering, 3 (9). pp. 2247-2253. ISSN 2168-0485

Hamidah, Abdullah and Khan, Maksudur R. and Manoj, Pudukudya and Zahira, Yaakob and Nur Aminatulmimi, Ismail (2015) CeO2-TiO2 as a Visible Light Active Catalyst for the Photoreduction of CO2 to Methanol. Journal of Rare Earths, 33 (11). pp. 1155-1161. ISSN 1002-0721

Haris, Hassanal and Jahir Hussain, Fathima Shahitha and K., Kadirgama and M. M., Yusoff (2015) Crystallization, Characterization, & Application of Hydroxyl Apatite on Hydroxyl Ethyl Cellulose in the Present of Stimulated Body Fluid Solution (SBF). Australian Journal of Basic and Applied Sciences, 9 (37). pp. 185-190. ISSN 19918178

Hojjat, Damirchi and G., Najafi and Siamak, Alizadehnia and B., Ghobadian and Talal, Yusaf and R., Mamat (2015) Design, Fabrication and Evaluation of Gamma-Type Stirling Engine to Produce Electricity from Biomass for the Micro-CHP System. Energy Procedia, 75. pp. 137-143. ISSN 1876-6102

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2015) Effect of Cooling and Isothermal Aging on Microstructure Using Electroless Nickel (Boron) Plating. Applied Mechanics and Materials, 695. pp. 352-356. ISSN 1662-7482

Hesami, Majid and Gupta, Arun and Jaafar, Abdullah and Avazpour, Mahrokh (2015) Effect of Electron Radiations on the Physical Properties of Laminated Particle Boards. Asian Journal of Applied Sciences, 3 (2). pp. 324-331. ISSN 2321–0893

Hamzeh Taha, Alkasasbeh and Mohd Zuki, Salleh and Razman, Mat Tahar and Roslinda, Nazar (2015) Effect of Radiation and Magnetohydrodynamic Free Convection Boundary Layer Flow on a Solid Sphere with Convective Boundary Conditions. Walailak Journal of Science and Technology (WJST), 12 (9). pp. 849-861. ISSN 686-3933 (print); 2228-835X (online)

He, Yu Hai and Ahmad Ziad, Sulaiman and Azilah, Ajit (2015) Effect of Ultrasound and Enzyme on The Extraction of Eurycoma Longifolia (Tongkat Ali). International Journal of Chemical and Molecular Engineering, 9 (4). pp. 1-21.

Huei, Ruey Ong and Khan, Maksudur R. and Ridzuan, Ramli and Yonghua, Du and Shibo, Xi and R. M., Yunus (2015) Facile Synthesis of Copper Nanoparticles in Glycerol at Room Temperature: Formation Mechanism. RSC Advances, 5 (31). pp. 24544-24549. ISSN 2046-2069

Hariri, Hilwani and Hasnah, Haron and Patel, Chris (2015) Factors Influencing the Independence of Government Auditors. Journal of Problems and Perspectives in Management, 13 (2 (sp)). pp. 380-388. ISSN 1727-7051

Hegde, Gurumurthy and Yuvaraj, A. R. and Wan, Sinn Yam and M. M., Yusoff (2015) Fast Photoswitching Azo Dyes. Polymer Science & Technology General, 353 (1).

Hazrulrizawati, Hamid and M. M., Yusoff and M., Liu and M. R., Karim (2015) α-Glucosidase and α-amylase Inhibitory Constituents of Tinospora crispa: Isolation and Chemical Profile Confirmation by Ultra-high Performance Liquid Chromatography-quadrupole Time-of-flight/mass spectrometry. Journal of Functional Foods, 16. pp. 74-80. ISSN 1756-4646

Hadi, Manap and Lewis, Elfed (2015) The Interference Study of Green-House Gases for an Ammonia Sensor. Applied Mechanics and Materials, 704. pp. 244-247. ISSN 1662-7482

Hagos, F. Y. and A. R. A., Aziz and S. A., Sulaiman (2015) Investigation Of Deposit Formation In Direct-Injection Spark-Ignition Engine Powered On Syngas. International Journal of Automotive Technology (IJAT), 16 (3). pp. 479-485. ISSN 1229-9138 (print);1976-3832 (online)

Hegde, Gurumurthy and Pearl Zynia, Fernandes and A. R., Yuvaraj and Gan, Siew Mei and Lutfor, M. R. and M. M., Yusoff (2015) Light Sensitive Molecule for Photonic Devices. Polymer Science & Technology General , 353 (1).

Hagos, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman (2015) Methane Enrichment of Syngas (H2/CO) in a Spark-ignition Direct-injection Engine: Combustion, Performance and Emissions Comparison With Syngas and Compressed Natural Gas. Energy, 90 (Prt. 2). pp. 2006-2015. ISSN 0360-5442 (Print), 1873-6785 (Online)

Hussain K., Khaleaf and Kamarul Hawari, Ghazali and Mithaq Na'ma, Raheema and Abdalla, Ahmed N. (2015) A New Approach in a Gray-Level Image Contrast Enhancement by using Fuzzy Logic Technique. International Journal of Scientific Research in Science, Engineering and Technology, 1 (1). pp. 19-23. ISSN 2395-1990

Hegde, Gurumurthy and A. R., Yuvaraj and Wan, Sinn Yam and Tze, Nee Chan and Yit, Peng Goh (2015) New Para-substituted Non-symmetric Isoflavones for their Fast Photo-switching Ability: Synthesis and their Liquid Crystal Characterization. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 135. pp. 1115-1122. ISSN 1386-1425 (print); 1873-3557 (online)

Hong, Mee Song and Wan Ismail, Ibrahim and Nor Rul Hasma, Abdullah (2015) Optimal Load Frequency Control in Single Area Power System Using Pid Controller Based on Bacterial Foraging & Particle Swarm Optimization. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 10733-10739. ISSN 1819-6608

Hazim, Sharudin and Nik Rosli, Abdullah and A. M. I., Mamat and Obed M., Ali and R., Mamat (2015) An Overview of Spark Ignition Engine Operating on Lower-Higher Molecular Mass Alcohol Blended Gasoline Fuels. Jurnal Teknologi (Sciences and Engineering), 76 (5). pp. 101-105. ISSN 0127-9696 (print); 2180-3722 (online)

Hasan, Mohammed M. and M., Ishak and M. R. M., Rejab (2015) A Simplified Design of Clamping System and Fixtures for Friction Stir Welding of Aluminium Alloys. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1628-1639. ISSN 2289-4659 (print); 2231-8380 (online)

Hamzah, Ahmad and Nur Aqilah, Othman and Namerikawa, Toru (2015) Sufficient Condition for Estimation in Designing H∞ Filter-Based SLAM. Mathematical Problems in Engineering, 2015. pp. 1-14. ISSN 1024-123X (print); 1563-5147 (online)

Huei, Ruey Ong and Khan, Maksudur R. and Yousuf, Abu and Nor Amalina, Hussain and Cheng, C. K. (2015) Synthesis and Characterization of a CaFe2O4 Catalyst for Oleic Acid Esterification. RSC Advances, 121 (5). pp. 100362-100368. ISSN 2046-2069

Hamada, K. I. and Mohammed, M. K. and M. M., Rahman (2014) Development of a Test-Rig for a Modern Motorcycle Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2034-2041. ISSN 1985-9325(Print); 2180-1606 (Online)

Hamada, K. I. and M. M., Rahman (2014) An Experimental Study for Performance and Emissions of a Small Four-Stroke SI Engine For Modern Motorcycle. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1852-1865. ISSN 1985-9325(Print); 2180-1606 (Online)

Hegde, Gurumurthy and Tagg, Tei and Siti Athirah, Mohamad Jamali and Hasiah, Salleh (2014) Synthesis, Characterization and Electrical Conductance of Ferrocenylazobenzene. Molecular Crystals and Liquid Crystals, 604 (1). pp. 142-150. ISSN 1542-1406 (print); 1563-5287 (online)

Hong, Mee Song and M. H., Sulaiman and Mohd Rusllim, Mohamed (2014) An Application of Grey Wolf Optimizer for Solving Combined Economic Emission Dispatch Problems. International Review on Modelling and Simulations (I.R.E.M.O.S), 7 (5). pp. 838-844. ISSN 1974-9821

Hegde, Gurumurthy and M. M., Yusoff and Sidharth, S. N. and Yuvaraj, A. R. and Hui, Tai Joo and Sarojini, B. K. (2014) Light Induced Properties of Chalcones Correlated with Molecular Structure and Photophysical Properties for Permanent Optical Storage Device. Advanced Materials Research, 1033-1. pp. 1149-1153. ISSN 1022-6680 (print), 1662-8985 (online)

Hegde, Gurumurthy and Mehdi, Q. Z. and Al-Dabbagh, Jinan B. and Ahmed, Naser Mahmoud (2014) Enhancement of Surface Properties Using New Annealing Technique for ITO Thin Films. Surface Engineering. ISSN 0267-0844 (print); 1743-2944 (online)

Hegde, Gurumurthy and Kumar, Anuj and Shoriya Aruni, Abdul Manaf and Zainab, Ngaini and K. V., Sharma (2014) Catalyst Free Silica Templated Porous Carbon Nanoparticles from Bio-Waste Materials. Chemical Communications, 50 (84). pp. 12702-12705. ISSN 1359-7345 (print), 1364-548X (online)

Hegde, Gurumurthy and Alla, Rasha Ata and Asman, D. Chambers and M. M., Yusoff and Matharu, A. S. and Komitov, Lachezar (2014) Photoalignment Studies on Azo Containing Thiophene Based Acrylates. Advanced Materials Research, 895. pp. 125-129. ISSN 1022-6680 (print), 1662-8985 (online)

Hegde, Gurumurthy and Mehdi, Qasim and Jinan B., Al-Dabbagh and Ahmed, Naser Mahmoud and Mohamad Ashry, Jusoh (2014) Improving Physical Properties of Nano Layered ITO Thin Films by using a Novel Oil Thermal Annealing. Wulfenia Journal, 21 (5). pp. 20-28. ISSN 1561-882X

Hegde, Gurumurthy and A. R., Yuvaraj and Mei, Gan Siew and Siti Aisyah, Mustapha and M. M., Yusoff and V. G., Chigrinov (2014) Biocomposite Polymer Embedded with Light-Sensitive Molecules for Plastic Displays. SPIE Proceedings Vol. 9005: Advances in Display Technologies IV, 9005. 90050B-1. ISSN 9780819499189

Hegde, Gurumurthy and Lutfor, M. R. and M. M., Yusoff and Muhammad Nor Fazli, Abd Malek and Nurlin, Abu Samah and Srinivasa, H. T. and Kumar, Sandeep (2014) Synthesis and Characterization of Naphthalene-Based Banana- Shaped Liquid Crystals for Photoswitching Properties. Journal of the Chinese Chemical Society, 61 (5). pp. 571-577. ISSN 0009-4536 (print); 2192-6549 (online)

Hegde, Gurumurthy and A. R., Yuvaraj and M. M., Yusoff and Chigrinov, V. G. (2014) Nanoscale Engineering of Photo Aligning Cibacron Brilliant Yellow. Journal of the Society for Information Display, 21 (11). pp. 486-490. ISSN 1071-0922

Hegde, Gurumurthy and Yuvaraj, A. R. and Gan, Siew Mei and Ajaykumar, D. Kulkarni and M. M., Yusoff (2014) Aliphatic/aromatic Spacers Based Azo Dye Dimers: Synthesis and Application for Optical Storage Devices. RSC Advances, 4 (92). pp. 50811-50818. ISSN 2046-2069

He, Yuhai and Syed Mohd Saufi, Tuan Chik and Chong, Fui Chin (2014) Application of Adsorption Chromatography in the Papain Processing. GSTF Journal of Chemical Sciences (JChem), 1 (2). pp. 9-15. ISSN 2339-5079 (Online)

Hossain, Mohamed Amjed and Islam, Mir Sujaul and Nasly, Mohamed Ali (2014) Application of QUAL2Kw for Water Quality Modeling in the Tunggak River, Kuantan, Pahang, Malaysia. Research Journal of Recent Sciences, 3 (6). pp. 6-14. ISSN 2277-2502

Herawan, Tutut and Wan Maseri, Wan Mohd and Noraziah, Ahmad (2014) Applying Variable Precision Rough Set for Clustering Diabetics Dataset. International Journal of Multimedia and Ubiquitous Engineering (IJMUE), 9 (1). pp. 219-230. ISSN 1975-0080

Hua, Chyn Lee and Kah, Weng Siew and Khan, Maksudur R. and Chin, S. Y. and Jolius, Gimbun and Cheng, C. K. (2014) Catalytic Performance of Cement Clinker Supported Nickel Catalyst In Glycerol Dry Reforming. Journal of Energy Chemistry, 23 (5). pp. 645-656.

Hegde, Gurumurthy and Garudachari, B. and Isloor, Arun M. and Satyanarayana, M. N. and Fun, Hoong-Kun (2014) Click Chemistry Approach: Regioselective One-pot Synthesis of Some New 8-Trifluoromethylquinoline Based 1,2,3-Triazoles as Potent Antimicrobial Agents. European Journal of Medicinal Chemistry, 74. pp. 324-332. ISSN 0223-5234

Hadi, Manap and M. S., Najib (2014) A DOAS System For Monitoring Of Ammonia Emission In The Agricultural Sector. Sensors and Actuators B: Chemical, 205. pp. 411-415. ISSN 0925-4005

Hogas, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman (2014) Effect of Air-fuel Ratio on the Combustion Characteristics of Syngas (H2:CO) in Direct-injection Spark-ignition Engine. Energy Procedia, 61. pp. 2567-2571. ISSN 1876-6102

Harilal, Midhun and Nair, V. M. and Wariar, P. R. S. and Padmasree, K. P. and M. M., Yusoff and Rajan, Jose (2014) Electrical and Optical Properties of NdAlO3 Synthesized by an Optimized Combustion Process. Materials Characterization, 90. pp. 7-12. ISSN 1044-5803

Hamid, Yusoff and M. Z., Abdullah and Kamarul Arifin, Ahmad and M. K., Abdullah and Shafiq, Suhaimi (2014) Experimental Study on the Effect of Skin Flexibility on Aerodynamic Performance of Flapping Wings for Micro Air Vehicles. Applied Mechanics and Materials, 629. pp. 18-23. ISSN 1662-7482

Hongwu, Qin and Ma, Xiuqin and Herawan, Tutut and Jasni, Mohamad Zain (2014) MGR: An Information Theory Based Hierarchical Divisive Clustering Algorithm for Categorical Data. Knowledge-Based Systems, 67. pp. 401-411. ISSN 0950-7051

Hee, Chien Yee and Yusnita, Rahayu (2014) Monitoring Parking Space Availability via Zigbee Technology. International Journal of Future Computer and Communication, 3 (6). pp. 377-380. ISSN 2010-3751

Hazami, Che Hussain and A. R., Yusoff (2014) Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method. Advanced Materials Research, 903. pp. 129-134. ISSN 1022-6680 (print), 1662-8985 (online)

Hafizoah, Kassim and Bakhtyari, Mohammad Basir (2014) Perceptions of Afghanistan Students on the Use of Online Tools for Learning. International Journal of Technical Research and Applications (IJTRA), SI (3). pp. 16-21. ISSN 2320-8163

Hagos, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman (2014) Syngas (H2/CO) in a Spark-Ignition Direct-Injection Engine. Part 1: Combustion, Performance and Emissions Comparison with CNG. International Journal of Hydrogen Energy, 39 (31). pp. 17884-17895. ISSN 0360-3199

Hegde, Gurumurthy and Boodappa, Chandrakantha and Isloor, Arun M. and Shetty, Prakash and Sook, Fun Pang (2014) Synthesis and Biological Evaluation of Novel Substituted 1,3,4-thiadiazole and 2,6-di aryl substituted imidazo [2,1- b] [1,3,4]thiadiazole Derivatives. European Journal of Medicinal Chemistry, 71. pp. 316-323. ISSN 0223-5234 (prin); 1768-3254 (online)

Hua, Chyn Lee and Kah, Weng Siew and Jolius, Gimbun and Cheng, C. K. (2014) Synthesis and Characterisation of Cement Clinker-Supported Nickel Catalyst for Glycerol Dry Reforming. Chemical Engineering Journal, 255. pp. 245-256. ISSN 1385-8947

Hasimah, Sapiri and Razman, Mat Tahar (2014) System Dynamics Approach As A Risk Management Tool In Analyzing Pension Expenditure: The Case Of Malaysian Employees Public Pension Plan. The Singapore Economic Review, 59 (5). ISSN 0217-5908

Hafizoah, Kassim and Howard, Nicholas and Ng, Wan (2014) Using a Multimedia Learning Tool to Improve Creative Performance. Thinking Skills and Creativity, 13. pp. 9-19. ISSN 1871-1871

Hegde, Gurumurthy and Elamain, Omaima and Fodor-Csorba, Katalin and Komitov, Lachezar (2013) Field-induced Optically Isotropic State in Bent Core Nematic Liquid Crystals: Unambiguous Proof of Field-induced Optical Biaxiality. Journal of Physics D: Applied Physics, 46 (45). pp. 1-7. ISSN 1361-6463 (print); 0022-3727 (online)

Hafizoah, Kassim (2013) The Relationship Between Learning Styles, Creative Thinking Performance and Multimedia Learning Materials. Procedia - Social and Behavioral Sciences, 97. pp. 229-237. ISSN 1877-0428, ESSN: 1877-0428

Hegde, Gurumurthy and Elamain, Omaima and Fodor-Csorba, Katalin and Komitov, Lachezar (2013) Optically Isotropic State in Bent Core Nematic Mixtures with Rod Like Molecules Induced by Direct Current Electric Field. Applied Physics Letters, 103 (16). pp. 163501-1. ISSN 0003-6951 (print); 1077-3118 (online)

Hegde, Gurumurthy and Elamain, Omaima and Komitov, Lachezar (2013) Alignment and Alignment Transition of Bent Core Nematics. Applied Physics Letters, 103 (2). 023301-1. ISSN 0003-6951 (print); 1077-3118 (online)

Hegde, Gurumurthy and Ata Alla, Rasha and Komitov, Lachezar (2013) Light-control of Liquid Crystal Alignment from Vertical to Planar. Applied Physics Letters, 102 (23). pp. 233505-1. ISSN 0003-6951 (print); 1077-3118 (online)

Hegde, Gurumurthy and Namdar, Abdoullah and Ideris, Zakaria (2013) Application of Recycle Material in Construction Industry a Method of Sustainable Development. International Journal of Materials Science and Engineering, 1 (1). pp. 41-44. ISSN 2315-4462

Hojabri, Mojgan and Toudeshki, A. and Mariun, Norman and Nizam, H. and